CLIENT_BASE: Act like ROUTER_LATE for fav'd nodes, instead of like ROUTER (#8567 )

* Client_Base - Dont rebroadcast in early (Router) window Removed early rebroadcast check for CLIENT_BASE role. * Client_Base - Clamp rebroadcast to late (Router_Late) window on dupe * Only clamp to Router_Late window if packet from fav'd node --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Macro guard heap_caps_malloc_extmem_enable from SENSECAP_INDICATOR (#9007 )
2025-12-20 09:43:03 +00:00 · 2025-12-19 07:45:35 -06:00 · 2025-12-17 14:46:35 -06:00 · 2025-12-17 12:47:09 -06:00 · 2025-12-17 12:03:29 -06:00 · 2025-12-17 11:05:48 -06:00
135 changed files with 368 additions and 267 deletions
--- a/.github/workflows/build_firmware.yml
+++ b/.github/workflows/build_firmware.yml
@@ -56,16 +56,18 @@ jobs:
          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}

-      - name: Echo manifest from release/firmware-*.mt.json to job summary
-        if: ${{ always() }}
+      - name: Job summary
        env:
          PIO_ENV: ${{ inputs.pio_env }}
        run: |
-          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
+          echo "## $PIO_ENV" >> $GITHUB_STEP_SUMMARY
+          echo "<details><summary><strong>Manifest</strong></summary>" >> $GITHUB_STEP_SUMMARY
+          echo '' >> $GITHUB_STEP_SUMMARY
          echo '```json' >> $GITHUB_STEP_SUMMARY
          cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
          echo '' >> $GITHUB_STEP_SUMMARY
          echo '```' >> $GITHUB_STEP_SUMMARY
+          echo "</details>" >> $GITHUB_STEP_SUMMARY

      - name: Store binaries as an artifact
        uses: actions/upload-artifact@v6
--- a/platformio.ini
+++ b/platformio.ini
@@ -103,17 +103,13 @@ lib_deps =
 	thingsboard/TBPubSubClient@2.12.1
 	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
 	arduino-libraries/NTPClient@3.2.1
+
+; Extra TCP/IP networking libs for supported devices
+[networking_extra]
+lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0

-; Minimal networking libs for nrf52 (excludes Syslog to save flash)
-[nrf52_networking_base]
-lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
-
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
@@ -162,8 +158,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
+	# renovate: datasource=git-refs depName=INA3221 packageName=https://github.com/sgtwilko/INA3221 gitBranch=FixOverflow
+	https://github.com/sgtwilko/INA3221/archive/bb03d7e9bfcc74fc798838a54f4f99738f29fc6a.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
--- a/src/graphics/niche/InkHUD/PlatformioConfig.ini
+++ b/src/graphics/niche/InkHUD/PlatformioConfig.ini
@@ -8,4 +8,5 @@ build_flags =
  -D MESHTASTIC_EXCLUDE_INPUTBROKER ; Suppress default input handling
  -D HAS_BUTTON=0 ; Suppress default ButtonThread
 lib_deps =
-  https://github.com/ZinggJM/GFX_Root#2.0.0 ; Used by InkHUD as a "slimmer" version of AdafruitGFX
+  # TODO renovate
+  https://github.com/ZinggJM/GFX_Root#2.0.0 ; Used by InkHUD as a "slimmer" version of AdafruitGFX
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -428,10 +428,17 @@ void setup()
 #endif

 #if ARCH_PORTDUINO
+    RTCQuality ourQuality = RTCQualityDevice;
+
+    std::string timeCommandResult = exec("timedatectl status | grep synchronized | grep yes -c");
+    if (timeCommandResult[0] == '1') {
+        ourQuality = RTCQualityNTP;
+    }
+
    struct timeval tv;
    tv.tv_sec = time(NULL);
    tv.tv_usec = 0;
-    perhapsSetRTC(RTCQualityDevice, &tv);
+    perhapsSetRTC(ourQuality, &tv);
 #endif

    powerMonInit();
@@ -440,9 +447,11 @@ void setup()
    LOG_INFO("\n\n//\\ E S H T /\\ S T / C\n");

 #if defined(ARCH_ESP32) && defined(BOARD_HAS_PSRAM)
+#ifndef SENSECAP_INDICATOR
    // use PSRAM for malloc calls > 256 bytes
    heap_caps_malloc_extmem_enable(256);
 #endif
+#endif

 #if defined(DEBUG_MUTE) && defined(DEBUG_PORT)
    DEBUG_PORT.printf("\r\n\r\n//\\ E S H T /\\ S T / C\r\n");
--- a/src/mesh/Channels.h
+++ b/src/mesh/Channels.h
@@ -96,6 +96,8 @@ class Channels

    bool setDefaultPresetCryptoForHash(ChannelHash channelHash);

+    int16_t getHash(ChannelIndex i) { return hashes[i]; }
+
  private:
    /** Given a channel index, change to use the crypto key specified by that index
     *
@@ -113,8 +115,6 @@ class Channels
     */
    int16_t generateHash(ChannelIndex channelNum);

-    int16_t getHash(ChannelIndex i) { return hashes[i]; }
-
    /**
     * Validate a channel, fixing any errors as needed
     */
--- a/src/mesh/FloodingRouter.cpp
+++ b/src/mesh/FloodingRouter.cpp
@@ -124,6 +124,9 @@ void FloodingRouter::perhapsCancelDupe(const meshtastic_MeshPacket *p)
    if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE && iface) {
        iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
    }
+    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE && iface && nodeDB && nodeDB->isFromOrToFavoritedNode(*p)) {
+        iface->clampToLateRebroadcastWindow(getFrom(p), p->id);
+    }
 }

 bool FloodingRouter::isRebroadcaster()
--- a/src/mesh/RadioInterface.cpp
+++ b/src/mesh/RadioInterface.cpp
@@ -296,11 +296,6 @@ bool RadioInterface::shouldRebroadcastEarlyLikeRouter(meshtastic_MeshPacket *p)
        return true;
    }

-    // If we are a CLIENT_BASE and the packet is from or to a favorited node, we should rebroadcast early
-    if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE) {
-        return nodeDB->isFromOrToFavoritedNode(*p);
-    }
-
    return false;
 }

--- a/src/mesh/Router.cpp
+++ b/src/mesh/Router.cpp
@@ -692,7 +692,7 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)

    // Store a copy of encrypted packet for MQTT
    DEBUG_HEAP_BEFORE;
-    meshtastic_MeshPacket *p_encrypted = packetPool.allocCopy(*p);
+    p_encrypted = packetPool.allocCopy(*p);
    DEBUG_HEAP_AFTER("Router::handleReceived", p_encrypted);

    // Take those raw bytes and convert them back into a well structured protobuf we can understand
@@ -758,6 +758,7 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
    }

    packetPool.release(p_encrypted); // Release the encrypted packet
+    p_encrypted = nullptr;
 }

 void Router::perhapsHandleReceived(meshtastic_MeshPacket *p)
--- a/src/mesh/Router.h
+++ b/src/mesh/Router.h
@@ -91,6 +91,9 @@ class Router : protected concurrency::OSThread, protected PacketHistory
        before us */
    uint32_t rxDupe = 0, txRelayCanceled = 0;

+    // pointer to the encrypted packet
+    meshtastic_MeshPacket *p_encrypted = nullptr;
+
  protected:
    friend class RoutingModule;

--- a/src/modules/AdminModule.cpp
+++ b/src/modules/AdminModule.cpp
@@ -417,6 +417,9 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
    }
    case meshtastic_AdminMessage_enter_dfu_mode_request_tag: {
        LOG_INFO("Client requesting to enter DFU mode");
+#if HAS_SCREEN
+        IF_SCREEN(screen->showSimpleBanner("Device is rebooting\ninto DFU mode.", 0));
+#endif
 #if defined(ARCH_NRF52) || defined(ARCH_RP2040)
        enterDfuMode();
 #endif
--- a/variants/esp32/betafpv_2400_tx_micro/platformio.ini
+++ b/variants/esp32/betafpv_2400_tx_micro/platformio.ini
@@ -15,4 +15,5 @@ upload_protocol = esptool
 upload_speed = 460800
 lib_deps =
  ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32/betafpv_900_tx_nano/platformio.ini
+++ b/variants/esp32/betafpv_900_tx_nano/platformio.ini
@@ -13,5 +13,3 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 460800
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/chatter2/platformio.ini
+++ b/variants/esp32/chatter2/platformio.ini
@@ -9,4 +9,5 @@ build_flags =
  
 lib_deps =
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32/esp32.ini
+++ b/variants/esp32/esp32.ini
@@ -53,17 +53,18 @@ build_flags =
 lib_deps =
  ${arduino_base.lib_deps}
  ${networking_base.lib_deps}
+  ${networking_extra.lib_deps}
  ${environmental_base.lib_deps}
  ${environmental_extra.lib_deps}
  ${radiolib_base.lib_deps}
  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@^1.4.3
+  h2zero/NimBLE-Arduino@1.4.3
  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.2
  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
--- a/variants/esp32/m5stack_core/platformio.ini
+++ b/variants/esp32/m5stack_core/platformio.ini
@@ -25,4 +25,5 @@ lib_ignore =
  m5stack-core
 lib_deps = 
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32/m5stack_coreink/platformio.ini
+++ b/variants/esp32/m5stack_coreink/platformio.ini
@@ -18,8 +18,10 @@ build_flags =
  -DM5STACK
 lib_deps = 
  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 lib_ignore =
  m5stack-coreink
 monitor_filters = esp32_exception_decoder
--- a/variants/esp32/nano-g1-explorer/platformio.ini
+++ b/variants/esp32/nano-g1-explorer/platformio.ini
@@ -2,8 +2,6 @@
 [env:nano-g1-explorer]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D NANO_G1_EXPLORER
--- a/variants/esp32/nano-g1/platformio.ini
+++ b/variants/esp32/nano-g1/platformio.ini
@@ -2,8 +2,6 @@
 [env:nano-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D NANO_G1
--- a/variants/esp32/radiomaster_900_bandit/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit/platformio.ini
@@ -13,4 +13,5 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
  ${esp32_base.lib_deps}
+  # renovate: datasource=github-tags depName=STK8xxx-Accelerometer packageName=gjelsoe/STK8xxx-Accelerometer
  https://github.com/gjelsoe/STK8xxx-Accelerometer/archive/v0.1.1.zip
--- a/variants/esp32/radiomaster_900_bandit_micro/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit_micro/platformio.ini
@@ -15,5 +15,3 @@ build_flags =
  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/radiomaster_900_bandit_nano/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit_nano/platformio.ini
@@ -10,5 +10,3 @@ build_flags =
  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/station-g1/platformio.ini
+++ b/variants/esp32/station-g1/platformio.ini
@@ -2,8 +2,6 @@
 [env:station-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D STATION_G1
--- a/variants/esp32/tbeam/platformio.ini
+++ b/variants/esp32/tbeam/platformio.ini
@@ -4,7 +4,6 @@ extends = esp32_base
 board = ttgo-t-beam
 board_level = extra
 board_check = true
-lib_deps = ${esp32_base.lib_deps}
 build_flags = ${esp32_base.build_flags}
  -D TBEAM_V10
  -I variants/esp32/tbeam
@@ -21,5 +20,7 @@ build_flags =

 lib_deps =
  ${env:tbeam.lib_deps}
-  https://github.com/meshtastic/st7796/archive/refs/tags/1.0.5.zip ; display addon
-  lewisxhe/SensorLib@0.3.1 ; touchscreen addon
+  # renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
+  https://github.com/meshtastic/st7796/archive/1.0.5.zip
+  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
+  lewisxhe/SensorLib@0.3.1
--- a/variants/esp32/wiphone/platformio.ini
+++ b/variants/esp32/wiphone/platformio.ini
@@ -10,6 +10,9 @@ build_flags =
  -I variants/esp32/wiphone
 lib_deps = 
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
-  sparkfun/SX1509 IO Expander@^3.0.5
-  pololu/APA102@^3.0.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
+  sparkfun/SX1509 IO Expander@3.0.6
+  # renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102
+  pololu/APA102@3.0.0
--- a/variants/esp32c3/diy/esp32c3_super_mini/platformio.ini
+++ b/variants/esp32c3/diy/esp32c3_super_mini/platformio.ini
@@ -4,7 +4,7 @@
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32c3/diy/esp32c3_super_mini
  -D ARDUINO_USB_MODE=1
--- a/variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini
+++ b/variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini
@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -D ARDUINO_USB_MODE=1
  -D ARDUINO_USB_CDC_ON_BOOT=1
--- a/variants/esp32c3/heltec_esp32c3/platformio.ini
+++ b/variants/esp32c3/heltec_esp32c3/platformio.ini
@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D HELTEC_HT62
  -I variants/esp32c3/heltec_esp32c3
 monitor_speed = 115200
--- a/variants/esp32c3/heltec_hru_3601/platformio.ini
+++ b/variants/esp32c3/heltec_hru_3601/platformio.ini
@@ -2,8 +2,9 @@
 extends = esp32c3_base
 board = adafruit_qtpy_esp32c3
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D HELTEC_HRU_3601
  -I variants/esp32c3/heltec_hru_3601
 lib_deps = ${esp32c3_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32c3/m5stack-stamp-c3/platformio.ini
+++ b/variants/esp32c3/m5stack-stamp-c3/platformio.ini
@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32c3/m5stack-stamp-c3
 monitor_speed = 115200
--- a/variants/esp32c6/m5stack_unitc6l/platformio.ini
+++ b/variants/esp32c6/m5stack_unitc6l/platformio.ini
@@ -12,8 +12,10 @@ build_unflags =
  -D HAS_WIFI
 lib_deps =
  ${esp32c6_base.lib_deps}
-  adafruit/Adafruit NeoPixel@^1.12.3
-  h2zero/NimBLE-Arduino@^2.3.6
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@2.3.7
 build_flags = 
  ${esp32c6_base.build_flags}
  -D M5STACK_UNITC6L
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
@@ -16,6 +16,9 @@ build_flags =
  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.

 lib_deps = ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
-  maxpromer/PCA9557-arduino @ ^1.0.0
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=custom.pio depName=PCA9557-arduino packageName=maxpromer/library/PCA9557-arduino
+  maxpromer/PCA9557-arduino@1.0.0
--- a/variants/esp32s3/bpi_picow_esp32_s3/platformio.ini
+++ b/variants/esp32s3/bpi_picow_esp32_s3/platformio.ini
@@ -8,9 +8,10 @@ board_level = extra
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM2
 lib_deps =
-  ${esp32_base.lib_deps}
-  caveman99/ESP32 Codec2@^1.0.1
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=caveman99-ESP32_Codec2 packageName=caveman99/library/ESP32 Codec2
+  caveman99/ESP32 Codec2@1.0.1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/bpi_picow_esp32_s3
--- a/variants/esp32s3/crowpanel-esp32s3-5-epaper/platformio.ini
+++ b/variants/esp32s3/crowpanel-esp32s3-5-epaper/platformio.ini
@@ -25,6 +25,7 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip

 [env:crowpanel-esp32s3-4-epaper]
@@ -54,6 +55,7 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip

 [env:crowpanel-esp32s3-2-epaper]
@@ -83,4 +85,5 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
--- a/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+++ b/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
@@ -9,14 +9,16 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM1
 upload_speed = 921600
 lib_deps =
-  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/diy/my_esp32s3_diy_eink
  -Dmy
--- a/variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini
+++ b/variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini
@@ -9,13 +9,14 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
 lib_deps =
-  ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/diy/my_esp32s3_diy_oled
  -DBOARD_HAS_PSRAM
--- a/variants/esp32s3/dreamcatcher/platformio.ini
+++ b/variants/esp32s3/dreamcatcher/platformio.ini
@@ -12,8 +12,10 @@ build_flags =
  -D ARDUINO_USB_CDC_ON_BOOT=1

 lib_deps = ${esp32s3_base.lib_deps}
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0

 [env:dreamcatcher-2206] 
 extends = esp32s3_base
--- a/variants/esp32s3/elecrow_panel/platformio.ini
+++ b/variants/esp32s3/elecrow_panel/platformio.ini
@@ -41,9 +41,13 @@ build_flags = ${esp32s3_base.build_flags} -Os

 lib_deps = ${esp32s3_base.lib_deps}
  ${device-ui_base.lib_deps}
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
  earlephilhower/ESP8266SAM@1.0.1
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
  lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
+  # renovate: datasource=custom.pio depName=TCA9534 packageName=hideakitai/library/TCA9534
  hideakitai/TCA9534@0.1.1

 [crowpanel_small_esp32s3_base] ; 2.4, 2.8, 3.5 inch
--- a/variants/esp32s3/esp32-s3-pico/platformio.ini
+++ b/variants/esp32s3/esp32-s3-pico/platformio.ini
@@ -22,5 +22,7 @@ build_flags = ${esp32s3_base.build_flags}
  -DEINK_HEIGHT=128

 lib_deps = ${esp32s3_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32s3/hackaday-communicator/platformio.ini
+++ b/variants/esp32s3/hackaday-communicator/platformio.ini
@@ -12,4 +12,5 @@ build_flags = ${esp32s3_base.build_flags}
  -I variants/esp32s3/hackaday-communicator

 lib_deps = ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
+  # renovate: datasource=git-refs depName=meshtastic-Arduino_GFX packageName=https://github.com/meshtastic/Arduino_GFX gitBranch=master
+  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
--- a/variants/esp32s3/heltec_sensor_hub/platformio.ini
+++ b/variants/esp32s3/heltec_sensor_hub/platformio.ini
@@ -9,4 +9,5 @@ build_flags =
  -D HELTEC_SENSOR_HUB

 lib_deps = ${esp32s3_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32s3/heltec_v4/platformio.ini
+++ b/variants/esp32s3/heltec_v4/platformio.ini
@@ -7,8 +7,6 @@ build_flags =
  ${esp32s3_base.build_flags}
  -D HELTEC_V4
  -I variants/esp32s3/heltec_v4
-lib_deps = 
-  ${esp32s3_base.lib_deps}


 [env:heltec-v4]
@@ -23,8 +21,6 @@ build_flags =
  -D I2C_SCL=18
  -D I2C_SDA1=4
  -D I2C_SCL1=3
-lib_deps = 
-  ${heltec_v4_base.lib_deps}

 [env:heltec-v4-tft]
 extends = heltec_v4_base
@@ -107,6 +103,10 @@ build_flags =

 lib_deps = ${heltec_v4_base.lib_deps}
  ; ${device-ui_base.lib_deps}
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
  lovyan03/LovyanGFX@1.2.0
+  # renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
  https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
+  ; TODO revert to official device-ui (when merged)
+  # renovate: datasource=git-refs depName=Quency-D_device-ui packageName=https://github.com/Quency-D/device-ui gitBranch=heltec-v4-tft
  https://github.com/Quency-D/device-ui/archive/7c9870b8016641190b059bdd90fe16c1012a39eb.zip
--- a/variants/esp32s3/heltec_vision_master_e213/platformio.ini
+++ b/variants/esp32s3/heltec_vision_master_e213/platformio.ini
@@ -17,8 +17,10 @@ build_flags =
  -DEINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200

 [env:heltec-vision-master-e213-inkhud]
@@ -27,7 +29,7 @@ board = heltec_vision_master_e213
 board_level = pr
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32_base.build_src_filter}
+  ${esp32s3_base.build_src_filter}
  ${inkhud.build_src_filter}
 build_flags =  
  ${esp32s3_base.build_flags}
--- a/variants/esp32s3/heltec_vision_master_e290/platformio.ini
+++ b/variants/esp32s3/heltec_vision_master_e290/platformio.ini
@@ -20,8 +20,10 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/448c8538129fde3d02a7cb5e6fc81971ad92547f.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200

 [env:heltec-vision-master-e290-inkhud]
@@ -29,7 +31,7 @@ extends = esp32s3_base, inkhud
 board = heltec_vision_master_e290
 board_build.partitions = default_8MB.csv
 build_src_filter = 
-  ${esp32_base.build_src_filter} 
+  ${esp32s3_base.build_src_filter}
  ${inkhud.build_src_filter}
 build_flags = 
  ${esp32s3_base.build_flags}
--- a/variants/esp32s3/heltec_vision_master_t190/platformio.ini
+++ b/variants/esp32s3/heltec_vision_master_t190/platformio.ini
@@ -8,6 +8,8 @@ build_flags =
  -D HELTEC_VISION_MASTER_T190
 lib_deps =
  ${esp32s3_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
 upload_speed = 921600
--- a/variants/esp32s3/heltec_wireless_paper/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_paper/platformio.ini
@@ -18,8 +18,10 @@ build_flags =
  -D EINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200

 [env:heltec-wireless-paper-inkhud]
@@ -27,7 +29,7 @@ extends = esp32s3_base, inkhud
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32_base.build_src_filter} 
+  ${esp32s3_base.build_src_filter}
  ${inkhud.build_src_filter}
 build_flags =
  ${esp32s3_base.build_flags}
--- a/variants/esp32s3/heltec_wireless_paper_v1/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_paper_v1/platformio.ini
@@ -15,6 +15,8 @@ build_flags =
  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 upload_speed = 115200
--- a/variants/esp32s3/heltec_wireless_tracker/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker/platformio.ini
@@ -12,4 +12,5 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
@@ -11,4 +11,5 @@ build_flags =
  ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
@@ -10,4 +10,5 @@ build_flags =
  -D HELTEC_WIRELESS_TRACKER_V2
 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32s3/icarus/platformio.ini
+++ b/variants/esp32s3/icarus/platformio.ini
@@ -7,9 +7,8 @@ board_build.mcu = esp32s3
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
+; TODO renovate or remove
 platform_packages = platformio/framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
--- a/variants/esp32s3/link32_s3_v1/platformio.ini
+++ b/variants/esp32s3/link32_s3_v1/platformio.ini
@@ -3,7 +3,7 @@ extends = esp32s3_base
 board = esp32-s3-devkitc-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D LINK_32
  -I variants/esp32s3/link32_s3_v1
  -DARDUINO_USB_CDC_ON_BOOT
--- a/variants/esp32s3/m5stack_cores3/platformio.ini
+++ b/variants/esp32s3/m5stack_cores3/platformio.ini
@@ -6,8 +6,7 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 build_flags = 
-  ${esp32_base.build_flags} 
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -D M5STACK_CORES3
  -I variants/esp32s3/m5stack_cores3
-lib_deps = ${esp32_base.lib_deps}
--- a/variants/esp32s3/mesh-tab/platformio.ini
+++ b/variants/esp32s3/mesh-tab/platformio.ini
@@ -46,11 +46,12 @@ build_flags = ${esp32s3_base.build_flags}
  -D VIEW_320x240
  -D USE_PACKET_API
  -I variants/esp32s3/mesh-tab
-build_src_filter = ${esp32_base.build_src_filter}
+build_src_filter = ${esp32s3_base.build_src_filter}
 lib_deps =
-  ${esp32_base.lib_deps}
+  ${esp32s3_base.lib_deps}
  ${device-ui_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

 [mesh_tab_xpt2046]
 extends = mesh_tab_base
--- a/variants/esp32s3/nibble_esp32/platformio.ini
+++ b/variants/esp32s3/nibble_esp32/platformio.ini
@@ -3,6 +3,6 @@ extends = esp32s3_base
 board = esp32-s3-zero
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/nibble_esp32
--- a/variants/esp32s3/picomputer-s3/platformio.ini
+++ b/variants/esp32s3/picomputer-s3/platformio.ini
@@ -15,7 +15,8 @@ build_flags =

 lib_deps = 
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

 build_src_filter =
  ${esp32s3_base.build_src_filter}
--- a/variants/esp32s3/rak3312/platformio.ini
+++ b/variants/esp32s3/rak3312/platformio.ini
@@ -6,6 +6,6 @@ board_check = true
 upload_protocol = esptool

 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D RAK3312
  -I variants/esp32s3/rak3312
--- a/variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
+++ b/variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
@@ -8,14 +8,15 @@ upload_protocol = esptool
 board_build.partitions = default_8MB.csv

 build_flags = 
-  ${esp32_base.build_flags} 
+  ${esp32s3_base.build_flags}
  -D RAK3312
  -D RAK_WISMESH_TAP_V2 
  -I variants/esp32s3/rak_wismesh_tap_v2

 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

 [ft5x06]
 extends = mesh_tab_base
--- a/variants/esp32s3/seeed-sensecap-indicator/platformio.ini
+++ b/variants/esp32s3/seeed-sensecap-indicator/platformio.ini
@@ -9,7 +9,7 @@ board_check = true
 board_build.partitions = partition-table-8MB.csv
 upload_protocol = esptool

-build_flags = ${esp32_base.build_flags}
+build_flags = ${esp32s3_base.build_flags}
  -Ivariants/esp32s3/seeed-sensecap-indicator
  -DSENSECAP_INDICATOR
  -DCONFIG_ARDUHAL_LOG_COLORS
@@ -24,10 +24,12 @@ build_flags = ${esp32_base.build_flags}
  -DUSE_ARDUINO_HAL_GPIO

 lib_deps = ${esp32s3_base.lib_deps}
+  ; TODO switch back to official LovyanGFX
  https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
-
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0

 [env:seeed-sensecap-indicator-tft]
 extends = env:seeed-sensecap-indicator
@@ -64,4 +66,5 @@ build_flags =
 lib_deps =
  ${env:seeed-sensecap-indicator.lib_deps}
  ${device-ui_base.lib_deps}
+  ; TODO switch back to official bb_captouch
  https://github.com/mverch67/bb_captouch/archive/8626412fe650d808a267791c0eae6e5860c85a5d.zip ; alternative touch library supporting FT6x36
--- a/variants/esp32s3/seeed_xiao_s3/platformio.ini
+++ b/variants/esp32s3/seeed_xiao_s3/platformio.ini
@@ -6,8 +6,6 @@ board_check = true
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
--- a/variants/esp32s3/station-g2/platformio.ini
+++ b/variants/esp32s3/station-g2/platformio.ini
@@ -8,8 +8,6 @@ board_build.mcu = esp32s3
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
--- a/variants/esp32s3/t-deck-pro/platformio.ini
+++ b/variants/esp32s3/t-deck-pro/platformio.ini
@@ -5,7 +5,7 @@ board_check = true
 upload_protocol = esptool

 build_flags = 
-  ${esp32_base.build_flags} -I variants/esp32s3/t-deck-pro
+  ${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro
  -D T_DECK_PRO
  -D USE_EINK
  -D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
@@ -17,7 +17,11 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/ZinggJM/GxEPD2/archive/refs/tags/1.6.4.zip
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.4
+  # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
  https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
+  # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
  https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
+  # renovate: datasource=git-refs depName=BQ27220 packageName=https://github.com/mverch67/BQ27220 gitBranch=main
  https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
--- a/variants/esp32s3/t-deck/platformio.ini
+++ b/variants/esp32s3/t-deck/platformio.ini
@@ -12,9 +12,12 @@ build_flags = ${esp32s3_base.build_flags}
  -I variants/esp32s3/t-deck

 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.2.0
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0

 [env:t-deck-tft]
 extends = env:t-deck
@@ -68,4 +71,5 @@ build_flags =
 lib_deps =
  ${env:t-deck.lib_deps}
  ${device-ui_base.lib_deps}
+  # renovate: datasource=github-tags depName=bb_captouch packageName=bitbank2/bb_captouch
  https://github.com/bitbank2/bb_captouch/archive/refs/tags/1.3.1.zip
--- a/variants/esp32s3/t-eth-elite/platformio.ini
+++ b/variants/esp32s3/t-eth-elite/platformio.ini
@@ -15,4 +15,5 @@ lib_ignore =

 lib_deps = 
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=github-tags depName=ETHClass2 packageName=meshtastic/ETHClass2
  https://github.com/meshtastic/ETHClass2/archive/v1.0.0.zip
--- a/variants/esp32s3/t-watch-s3/platformio.ini
+++ b/variants/esp32s3/t-watch-s3/platformio.ini
@@ -6,16 +6,22 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

-build_flags = ${esp32_base.build_flags} 
+build_flags = ${esp32s3_base.build_flags}
  -DT_WATCH_S3
  -Ivariants/esp32s3/t-watch-s3
  -DPCF8563_RTC=0x51
  -DHAS_BMA423=1

 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
  lewisxhe/PCF8563_Library@1.0.1
-  adafruit/Adafruit DRV2605 Library@^1.2.2
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
+  adafruit/Adafruit DRV2605 Library@1.2.4
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0
+  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
  lewisxhe/SensorLib@0.2.0
--- a/variants/esp32s3/tbeam-s3-core/platformio.ini
+++ b/variants/esp32s3/tbeam-s3-core/platformio.ini
@@ -7,6 +7,7 @@ board_check = true

 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
  lewisxhe/PCF8563_Library@1.0.1

 build_flags = 
--- a/variants/esp32s3/tlora-pager/platformio.ini
+++ b/variants/esp32s3/tlora-pager/platformio.ini
@@ -17,14 +17,23 @@ build_flags = ${esp32s3_base.build_flags}
  -D ROTARY_BUXTRONICS

 lib_deps = ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
  earlephilhower/ESP8266SAM@1.0.1
+  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
  adafruit/Adafruit DRV2605 Library@1.2.4
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
  lewisxhe/SensorLib@0.3.1
-  https://github.com/pschatzmann/arduino-audio-driver/archive/refs/tags/v0.1.3.zip
+  # renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
+  https://github.com/pschatzmann/arduino-audio-driver/archive/v0.1.3.zip
+  # TODO renovate
  https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
+  # TODO renovate
  https://github.com/mverch67/RotaryEncoder/archive/da958a21389cbcd485989705df602a33e092dd88.zip

 [env:tlora-pager-tft]
--- a/variants/esp32s3/tlora_t3s3_epaper/platformio.ini
+++ b/variants/esp32s3/tlora_t3s3_epaper/platformio.ini
@@ -5,7 +5,7 @@ board_check = true
 upload_protocol = esptool

 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D TLORA_T3S3_EPAPER
  -I variants/esp32s3/tlora_t3s3_epaper
  -DUSE_EINK
@@ -20,6 +20,7 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip

 [env:tlora-t3s3-epaper-inkhud]
@@ -28,7 +29,7 @@ board = tlora-t3s3-v1
 board_check = true
 upload_protocol = esptool
 build_src_filter =
-  ${esp32_base.build_src_filter}
+  ${esp32s3_base.build_src_filter}
  ${inkhud.build_src_filter}
 build_flags =
  ${esp32s3_base.build_flags}
--- a/variants/esp32s3/tlora_t3s3_v1/platformio.ini
+++ b/variants/esp32s3/tlora_t3s3_v1/platformio.ini
@@ -5,4 +5,6 @@ board_check = true
 upload_protocol = esptool

 build_flags = 
-  ${esp32_base.build_flags} -D TLORA_T3S3_V1 -I variants/esp32s3/tlora_t3s3_v1
+  ${esp32s3_base.build_flags}
+  -D TLORA_T3S3_V1
+  -I variants/esp32s3/tlora_t3s3_v1
--- a/variants/esp32s3/tracksenger/platformio.ini
+++ b/variants/esp32s3/tracksenger/platformio.ini
@@ -12,7 +12,8 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

 [env:tracksenger-lcd]
 extends = esp32s3_base
@@ -28,7 +29,8 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

 [env:tracksenger-oled]
 extends = esp32s3_base
--- a/variants/esp32s3/unphone/platformio.ini
+++ b/variants/esp32s3/unphone/platformio.ini
@@ -27,10 +27,12 @@ build_src_filter =
  +<../variants/esp32s3/unphone>

 lib_deps = ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@ 1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.0
+  # TODO renovate
  https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
-  adafruit/Adafruit NeoPixel @ ^1.12.0
-
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2

 [env:unphone-tft]
 board_level = extra
--- a/variants/native/portduino-buildroot/platformio.ini
+++ b/variants/native/portduino-buildroot/platformio.ini
@@ -5,5 +5,4 @@ extends = portduino_base
 build_flags = ${portduino_base.build_flags} -O0 -I variants/native/portduino-buildroot
 board = buildroot
 board_level = extra
-lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}
--- a/variants/native/portduino.ini
+++ b/variants/native/portduino.ini
@@ -21,12 +21,13 @@ build_src_filter =
 lib_deps =
  ${env.lib_deps}
  ${networking_base.lib_deps}
+  ${networking_extra.lib_deps}
  ${radiolib_base.lib_deps}
  ${environmental_base.lib_deps}
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
  rweather/Crypto@0.4.0
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@^1.2.0
+  lovyan03/LovyanGFX@1.2.7
  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
--- a/variants/native/portduino/platformio.ini
+++ b/variants/native/portduino/platformio.ini
@@ -6,7 +6,8 @@ board = cross_platform
 board_level = extra
 lib_deps = 
  ${portduino_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
+  # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
+  melopero/Melopero RV3028@1.2.0

 build_src_filter = ${portduino_base.build_src_filter}

--- a/variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
+++ b/variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
@@ -11,5 +11,6 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_nRF52840-pca10059-v1>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink
--- a/variants/nrf52840/ELECROW-ThinkNode-M1/platformio.ini
+++ b/variants/nrf52840/ELECROW-ThinkNode-M1/platformio.ini
@@ -23,9 +23,12 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M1>
 lib_deps = 
  ${nrf52840_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
-  lewisxhe/PCF8563_Library@^1.0.1
-  khoih-prog/nRF52_PWM@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
+  khoih-prog/nRF52_PWM@1.0.1
 ;upload_protocol = fs

 [env:thinknode_m1-inkhud]
@@ -45,4 +48,5 @@ build_src_filter =
 lib_deps = 
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
--- a/variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini
+++ b/variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini
@@ -13,5 +13,7 @@ build_flags =
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M3>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  khoih-prog/nRF52_PWM@^1.0.1
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
+  khoih-prog/nRF52_PWM@1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
--- a/variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini
+++ b/variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini
@@ -12,4 +12,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M6>
 lib_deps =
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
--- a/variants/nrf52840/ME25LS01-4Y10TD/platformio.ini
+++ b/variants/nrf52840/ME25LS01-4Y10TD/platformio.ini
@@ -10,8 +10,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DME25LS01_4Y10TD
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS01-4Y10TD>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
+++ b/variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
@@ -15,7 +15,8 @@ board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS01-4Y10TD_e-ink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/MS24SF1/platformio.ini
+++ b/variants/nrf52840/MS24SF1/platformio.ini
@@ -9,8 +9,6 @@ build_flags = ${nrf52840_base.build_flags}
  -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/MS24SF1>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
+++ b/variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
@@ -12,7 +12,9 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/MakePython_nRF52840_eink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  zinggjm/GxEPD2@^1.6.2
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4
--- a/variants/nrf52840/MakePython_nRF52840_oled/platformio.ini
+++ b/variants/nrf52840/MakePython_nRF52840_oled/platformio.ini
@@ -8,5 +8,6 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/MakePython_nRF52840_oled>
 lib_deps = 
  ${nrf52840_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
 debug_tool = jlink
--- a/variants/nrf52840/TWC_mesh_v4/platformio.ini
+++ b/variants/nrf52840/TWC_mesh_v4/platformio.ini
@@ -8,5 +8,6 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mesh_v4>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink
--- a/variants/nrf52840/canaryone/platformio.ini
+++ b/variants/nrf52840/canaryone/platformio.ini
@@ -11,5 +11,6 @@ build_flags =
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/canaryone>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 ;upload_protocol = fs
--- a/variants/nrf52840/diy/WashTastic/platformio.ini
+++ b/variants/nrf52840/diy/WashTastic/platformio.ini
@@ -8,6 +8,4 @@ build_flags = ${nrf52840_base.build_flags}
  -D PRIVATE_HW
  -D EBYTE_E22_900M30S
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_tcxo>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini
@@ -6,8 +6,6 @@ build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/diy/nrf52_promicro_diy_tcxo
  -D NRF52_PROMICRO_DIY
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_tcxo>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink

 ; NRF52 ProMicro w/ E-Ink display
--- a/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/platformio.ini
+++ b/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/platformio.ini
@@ -10,6 +10,4 @@ build_flags = ${nrf52840_base.build_flags}
  -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/feather_diy/platformio.ini
+++ b/variants/nrf52840/feather_diy/platformio.ini
@@ -6,8 +6,6 @@ build_flags = ${nrf52840_base.build_flags}
  -Ivariants/nrf52840/feather_diy
  -Dfeather_diy
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/feather_diy>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini
+++ b/variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini
@@ -12,5 +12,3 @@ build_flags = ${nrf52840_base.build_flags}
  -DRADIOLIB_EXCLUDE_SX127X=1
  -DRADIOLIB_EXCLUDE_LR11X0=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/gat562_mesh_trial_tracker>
-lib_deps =
-  ${nrf52840_base.lib_deps}
--- a/variants/nrf52840/heltec_mesh_node_t114-inkhud/platformio.ini
+++ b/variants/nrf52840/heltec_mesh_node_t114-inkhud/platformio.ini
@@ -14,7 +14,8 @@ build_src_filter =
 lib_deps = 
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 extra_scripts =
  ${env.extra_scripts}
  variants/nrf52840/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays
--- a/variants/nrf52840/heltec_mesh_node_t114/platformio.ini
+++ b/variants/nrf52840/heltec_mesh_node_t114/platformio.ini
@@ -13,5 +13,7 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_node_t114>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
-  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
+  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
--- a/variants/nrf52840/heltec_mesh_pocket/platformio.ini
+++ b/variants/nrf52840/heltec_mesh_pocket/platformio.ini
@@ -25,9 +25,10 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_pocket> 
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
-
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip

 [env:heltec-mesh-pocket-5000-inkhud]
 extends = nrf52840_base, inkhud
@@ -71,9 +72,10 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_pocket> 
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
-
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip

 [env:heltec-mesh-pocket-10000-inkhud]
 extends = nrf52840_base, inkhud
--- a/variants/nrf52840/heltec_mesh_solar/platformio.ini
+++ b/variants/nrf52840/heltec_mesh_solar/platformio.ini
@@ -13,9 +13,13 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_solar>
 lib_deps = 
  ${nrf52840_base.lib_deps}
+  # renovate: datasource=git-refs depName=NMIoT-meshsolar packageName=https://github.com/NMIoT/meshsolar gitBranch=main
  https://github.com/NMIoT/meshsolar/archive/dfc5330dad443982e6cdd37a61d33fc7252f468b.zip
-  lewisxhe/PCF8563_Library@^1.0.1
-  ArduinoJson@6.21.4
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
+  # renovate: datasource=custom.pio depName=ArduinoJson packageName=bblanchon/library/ArduinoJson
+  bblanchon/ArduinoJson@6.21.4
+
 [env:heltec-mesh-solar]
 extends = heltec_mesh_solar_base
 build_flags = ${heltec_mesh_solar_base.build_flags}
@@ -48,6 +52,7 @@ build_flags = ${heltec_mesh_solar_base.build_flags}
  -DEINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${heltec_mesh_solar_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip

 [env:heltec-mesh-solar-inkhud]
@@ -71,7 +76,6 @@ lib_deps =
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${heltec_mesh_solar_base.lib_deps}

-
 [env:heltec-mesh-solar-oled]
 extends = heltec_mesh_solar_base
 build_flags = ${heltec_mesh_solar_base.build_flags}
@@ -112,4 +116,5 @@ build_flags = ${heltec_mesh_solar_base.build_flags}
  -DPIN_SPI1_SCK=ST7789_SCK
 lib_deps =
  ${heltec_mesh_solar_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
--- a/variants/nrf52840/meshlink/platformio.ini
+++ b/variants/nrf52840/meshlink/platformio.ini
@@ -14,8 +14,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DRADIOLIB_EXCLUDE_LR11X0=1
  
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
@@ -48,6 +46,7 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
--- a/variants/nrf52840/meshtiny/platformio.ini
+++ b/variants/nrf52840/meshtiny/platformio.ini
@@ -7,5 +7,3 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/nrf52840/meshtiny -D MESHT
  -D USE_PIN_BUZZER
  -D MESHTASTIC_EXCLUDE_GPS=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshtiny>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
--- a/variants/nrf52840/monteops_hw1/platformio.ini
+++ b/variants/nrf52840/monteops_hw1/platformio.ini
@@ -10,6 +10,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/monteop
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
+  # renovate: datasource=github-tags depName=RAK13800-W5100S packageName=RAKWireless/RAK13800-W5100S
  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
--- a/variants/nrf52840/muzi_base/platformio.ini
+++ b/variants/nrf52840/muzi_base/platformio.ini
@@ -10,6 +10,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52840_base.build_src_filter} +<../variants/nrf52840/muzi_base>
 lib_deps = 
  ${nrf52840_base.lib_deps}
+  # renovate: datasource=custom.pio depName=ArtronShop_RX8130CE packageName=artronshop/library/ArtronShop_RX8130CE
  artronshop/ArtronShop_RX8130CE@1.0.0
-
-
--- a/variants/nrf52840/nano-g2-ultra/platformio.ini
+++ b/variants/nrf52840/nano-g2-ultra/platformio.ini
@@ -10,5 +10,6 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2-ultra>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
+  lewisxhe/PCF8563_Library@1.0.1
 ;upload_protocol = fs
--- a/variants/nrf52840/nrf52.ini
+++ b/variants/nrf52840/nrf52.ini
@@ -2,7 +2,7 @@
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
 platform =
  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
-  platformio/nordicnrf52@^10.8.0
+  platformio/nordicnrf52@10.10.0
 extends = arduino_base
 platform_packages =
  ; our custom Git version until they merge our PR
--- a/variants/nrf52840/nrf52832.ini
+++ b/variants/nrf52840/nrf52832.ini
@@ -4,6 +4,3 @@ extends = nrf52_base
 build_flags =
  ${nrf52_base.build_flags}
  -DSERIAL_BUFFER_SIZE=1024
-
-lib_deps =
-  ${nrf52_base.lib_deps}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
korbinianbauer	ee6449746b	CLIENT_BASE: Act like ROUTER_LATE for fav'd nodes, instead of like ROUTER (#8567 ) * Client_Base - Dont rebroadcast in early (Router) window Removed early rebroadcast check for CLIENT_BASE role. * Client_Base - Clamp rebroadcast to late (Router_Late) window on dupe * Only clamp to Router_Late window if packet from fav'd node --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-12-19 07:45:35 -06:00
Jason P	e9db03d185	Macro guard heap_caps_malloc_extmem_enable from SENSECAP_INDICATOR (#9007 )	2025-12-17 14:46:35 -06:00
Austin	176d8def48	PlatformIO: Restructure networking_base for re-use (#8964 )	2025-12-17 12:47:09 -06:00
Jonathan Bennett	5b299f3ede	Prep work for better Store and Forward (#8999 ) * make channels.h getHash public * router.* make the encrypted packet copy available for modules to access * Update src/mesh/Router.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Set p_encrypted to nullptr after release --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-12-17 12:03:29 -06:00
Austin	96c42229b0	Renovate all the things (#8994 )	2025-12-17 11:05:48 -06:00
Jonathan Bennett	f1aefc4eef	Detect if NTP is active on native (#8962 ) * Detect if NTP is active on native * Drop debug warning	2025-12-16 20:40:29 -06:00
Ben Meadors	203826374c	Merge branch 'master' into develop	2025-12-16 11:45:08 -06:00
Austin	917794ebab	PIO: Remove useless inheritence (references extends env) (#8987 ) Remove lib_deps section for all PlatformIO envs which are unneeded (only references the `extends` lib_deps, thus pointless) This makes the configs more concise and make future PIO variants/ libdeps audits easier.	2025-12-16 15:38:10 +11:00
Austin	ed77ba5612	Replace PIO fuzzy version matches (reproducible builds) (#8984 ) This change does not introduce version changes, but simply "updates" to the version already being referenced by the fuzzy-match (^)	2025-12-15 19:48:34 -06:00
Austin	eafa8c7b47	PIO: Fix ESP32 sub-variant inheritance (#8983 )	2025-12-15 19:04:03 -06:00
Austin	024ac74f5c	rp2xx0: Update to arduino-pico 5.4.4 (#8979 )	2025-12-15 16:09:59 -06:00
Ben Meadors	d0d375f1ff	Merge pull request #8973 from meshtastic/master Backmerge	2025-12-14 14:51:16 -06:00
Jason P	e8ebfc0513	Add Rebooting to DFU mode notification as a simple pop-up (#8970 ) * Add DFU notification as a simple pop-up * Add safe conditional of IF_SCREEN * Forgot #if HAS_SCREEN	2025-12-14 14:50:41 -06:00
Austin	bf32f17f28	Actions: Compact manifest job output summary (#8957 )	2025-12-13 12:32:01 +11:00