rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-29 21:22:03 +00:00
Code Issues Packages Projects Releases Wiki Activity

Remove stale variant.h defines (#9470)

Browse Source 
* Remove noop CANNED_MESSAGE_MODULE_ENABLE define

* Remove over-eager warning removal

* Remove unused LED_CONN

* Dead defines removal

* Rename oddball LED pin name

* Rename second oddball LED pin name

* Remove another dead define
This commit is contained in:
Jonathan Bennett
2026-01-29 10:58:06 -06:00
committed by GitHub
parent 61b39acc7d
commit 45fbc0f9d3
56 changed files with 11 additions and 141 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
src/input/SerialKeyboard.cpp
View File

@@ -5,7 +5,6 @@
SerialKeyboard *globalSerialKeyboard = nullptr;
#ifdef INPUTBROKER_SERIAL_TYPE
#define CANNED_MESSAGE_MODULE_ENABLE 1 // in case it's not set in the variant file
#if INPUTBROKER_SERIAL_TYPE == 1 // It's a Chatter
// 3 SHIFT level (lower case, upper case, numbers), up to 4 repeated presses, button number

3
src/modules/CannedMessageModule.cpp
View File

@@ -130,8 +130,7 @@ CannedMessageModule::CannedMessageModule()
: SinglePortModule("canned", meshtastic_PortNum_TEXT_MESSAGE_APP), concurrency::OSThread("CannedMessage")
{
this->loadProtoForModule();
if ((this->splitConfiguredMessages() <= 0) && (cardkb_found.address == 0x00) && !INPUTBROKER_MATRIX_TYPE &&
!CANNED_MESSAGE_MODULE_ENABLE) {
if ((this->splitConfiguredMessages() <= 0) && (cardkb_found.address == 0x00) && !INPUTBROKER_MATRIX_TYPE) {
LOG_INFO("CannedMessageModule: No messages are configured. Module is disabled");
this->runState = CANNED_MESSAGE_RUN_STATE_DISABLED;
disable();

4
src/modules/CannedMessageModule.h
View File

@@ -27,10 +27,6 @@ enum CannedMessageModuleIconType { shift, backspace, space, enter };
#define CANNED_MESSAGE_MODULE_MESSAGE_MAX_COUNT 50
#define CANNED_MESSAGE_MODULE_MESSAGES_SIZE 800
#ifndef CANNED_MESSAGE_MODULE_ENABLE
#define CANNED_MESSAGE_MODULE_ENABLE 0
#endif
// ============================
// Data Structures
// ============================

1
src/modules/StatusLEDModule.cpp
View File

@@ -130,7 +130,6 @@ int32_t StatusLEDModule::runOnce()
#ifdef LED_CHARGE
digitalWrite(LED_CHARGE, CHARGE_LED_state);
#endif
// digitalWrite(green_LED_PIN, LED_STATE_OFF);
#ifdef LED_PAIRING
digitalWrite(LED_PAIRING, PAIRING_LED_state);
#endif

1
src/sleep.cpp
View File

@@ -241,7 +241,6 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
#ifdef PIN_POWER_EN
digitalWrite(PIN_POWER_EN, LOW);
pinMode(PIN_POWER_EN, INPUT); // power off peripherals
// pinMode(PIN_POWER_EN1, INPUT_PULLDOWN);
#endif
#ifdef RAK_WISMESH_TAP_V2

1
variants/esp32/chatter2/variant.h
View File

@@ -98,7 +98,6 @@
#define KB_LOAD 21 // load values from the switch and store in shift register
#define KB_CLK 22 // clock pin for serial data out
#define KB_DATA 23 // data pin
#define CANNED_MESSAGE_MODULE_ENABLE 1
/////////////////////////////////////////////////////////////////////////////////
// //

1
variants/esp32/m5stack_core/platformio.ini
View File

@@ -30,7 +30,6 @@ build_flags =
-DTFT_BL=32
-DSPI_FREQUENCY=40000000
-DSPI_READ_FREQUENCY=16000000
-DDISABLE_ALL_LIBRARY_WARNINGS
lib_ignore =
m5stack-core
lib_deps =

1
variants/esp32/tbeam/variant.h
View File

@@ -57,7 +57,6 @@
#ifndef TOUCH_IRQ
#define TOUCH_IRQ -1
#endif
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define USE_VIRTUAL_KEYBOARD 1
#define ST7796_NSS 25

1
variants/esp32/trackerd/variant.h
View File

@@ -10,7 +10,6 @@
#define LED_PIN 13 // 13 red, 2 blue, 15 red
// #define HAS_BUTTON 0
#define BUTTON_PIN 0
#define BUTTON_NEED_PULLUP

12
variants/esp32s3/hackaday-communicator/variant.h
View File

@@ -16,22 +16,12 @@
#define SLEEP_TIME 120
#define GPS_DEFAULT_NOT_PRESENT 1
// #define GPS_RX_PIN 44
// #define GPS_TX_PIN 43
// #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
// keyboard
#define I2C_SDA 47 // I2C pins for this board
#define I2C_SCL 14
// #define KB_POWERON -1 // must be set to HIGH
// #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
// #define KB_BL_PIN 46 // not used for now
#define KB_INT 13
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define TFT_DC 39
#define TFT_CS 41
@@ -44,11 +34,9 @@
#define LORA_MOSI 3
#define LORA_CS 17
// #define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 18
#define LORA_DIO1 16 // SX1262 IRQ
#define LORA_DIO2 15 // SX1262 BUSY
// #define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1

2
variants/esp32s3/picomputer-s3/variant.h
View File

@@ -52,8 +52,6 @@
// Picomputer gets a white on black display
#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define INPUTBROKER_MATRIX_TYPE 1
#define KEYS_COLS \

1
variants/esp32s3/rak3312/variant.h
View File

@@ -24,7 +24,6 @@
#define PIN_LED1 LED_GREEN
#define PIN_LED2 LED_BLUE
#define LED_CONN LED_BLUE
#define LED_PIN LED_GREEN
#define ledOff(pin) pinMode(pin, INPUT)

3
variants/esp32s3/rak_wismesh_tap_v2/variant.h
View File

@@ -32,7 +32,6 @@
#define PIN_LED1 LED_GREEN
#define PIN_LED2 LED_BLUE
#define LED_CONN LED_BLUE
#define LED_PIN LED_GREEN
#define ledOff(pin) pinMode(pin, INPUT)
@@ -47,10 +46,8 @@
#define SPI_MISO (10)
#define SPI_CS (12)
#define HAS_BUTTON 1
#define BUTTON_PIN 0
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define USE_VIRTUAL_KEYBOARD 1
#define BATTERY_PIN 1

1
variants/esp32s3/t-deck-pro/variant.h
View File

@@ -43,7 +43,6 @@
// TCA8418 keyboard
#define KB_BL_PIN 42
#define CANNED_MESSAGE_MODULE_ENABLE 1
// microphone PCM5102A
#define PCM5102A_SCK 47

1
variants/esp32s3/t-deck/variant.h
View File

@@ -61,7 +61,6 @@
#define KB_POWERON 10 // must be set to HIGH
#define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
#define KB_BL_PIN 46 // not used for now
#define CANNED_MESSAGE_MODULE_ENABLE 1
// trackball
#define HAS_TRACKBALL 1

1
variants/esp32s3/tlora-pager/variant.h
View File

@@ -61,7 +61,6 @@
#define I2C_NO_RESCAN
#define KB_BL_PIN 46
#define KB_INT 6
#define CANNED_MESSAGE_MODULE_ENABLE 1
// audio codec ES8311
#define HAS_I2S

1
variants/esp32s3/tracksenger/internal/variant.h
View File

@@ -78,7 +78,6 @@
// keyboard changes
#define PIN_BUZZER 43
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define INPUTBROKER_MATRIX_TYPE 1

1
variants/esp32s3/tracksenger/lcd/variant.h
View File

@@ -102,7 +102,6 @@
// keyboard changes
#define PIN_BUZZER 43
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define INPUTBROKER_MATRIX_TYPE 1

1
variants/esp32s3/tracksenger/oled/variant.h
View File

@@ -79,7 +79,6 @@
// keyboard changes
#define PIN_BUZZER 43
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define INPUTBROKER_MATRIX_TYPE 1

1
variants/native/portduino-buildroot/variant.h
View File

@@ -1,6 +1,5 @@
#define HAS_SCREEN 1
#define USE_TFTDISPLAY 1
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define HAS_GPS 1
#define MAX_RX_TOPHONE portduino_config.maxtophone
#define MAX_NUM_NODES portduino_config.MaxNodes

1
variants/native/portduino/variant.h
View File

@@ -2,7 +2,6 @@
#define HAS_SCREEN 1
#endif
#define USE_TFTDISPLAY 1
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define HAS_GPS 1
#define MAX_RX_TOPHONE portduino_config.maxtophone
#define MAX_NUM_NODES portduino_config.MaxNodes

2
variants/nrf52840/Dongle_nRF52840-pca10059-v1/variant.h
View File

@@ -50,8 +50,6 @@ extern "C" {
#define RGBLED_BLUE (0 + 12) // Blue of RGB P0.12
#define RGBLED_CA // comment out this line if you have a common cathode type, as defined use common anode logic
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2

3
variants/nrf52840/ELECROW-ThinkNode-M1/variant.h
View File

@@ -55,7 +55,6 @@ extern "C" {
#define LED_RED PIN_LED3
#define LED_BLUE PIN_LED1
#define LED_GREEN PIN_LED2
#define LED_CONN PIN_GREEN
#define LED_STATE_ON 0 // State when LED is lit // LED灯亮时的状态
#define PIN_BUZZER (0 + 6)
/*
@@ -170,8 +169,6 @@ External serial flash WP25R1635FZUIL0
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
#define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

12
variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp
View File

@@ -37,8 +37,8 @@ void initVariant()
digitalWrite(KEY_POWER, HIGH);
pinMode(RGB_POWER, OUTPUT);
digitalWrite(RGB_POWER, HIGH);
pinMode(green_LED_PIN, OUTPUT);
digitalWrite(green_LED_PIN, LED_STATE_OFF);
pinMode(LED_GREEN, OUTPUT);
digitalWrite(LED_GREEN, LED_STATE_OFF);
pinMode(LED_BLUE, OUTPUT);
pinMode(PIN_POWER_USB, INPUT);
pinMode(PIN_POWER_DONE, INPUT);
@@ -63,8 +63,8 @@ void initVariant()
// called from main-nrf52.cpp during the cpuDeepSleep() function
void variant_shutdown()
{
digitalWrite(red_LED_PIN, HIGH);
digitalWrite(green_LED_PIN, HIGH);
digitalWrite(LED_RED, HIGH);
digitalWrite(LED_GREEN, HIGH);
digitalWrite(LED_BLUE, HIGH);
digitalWrite(PIN_EN1, LOW);
@@ -81,8 +81,8 @@ void variant_shutdown()
if (pin == PIN_POWER_USB || pin == BUTTON_PIN || pin == PIN_EN1 || pin == PIN_EN2 || pin == DHT_POWER ||
pin == ACC_POWER || pin == Battery_POWER || pin == GPS_POWER || pin == LR1110_SPI_MISO_PIN ||
pin == LR1110_SPI_MOSI_PIN || pin == LR1110_SPI_SCK_PIN || pin == LR1110_SPI_NSS_PIN || pin == LR1110_BUSY_PIN ||
pin == LR1110_NRESET_PIN || pin == LR1110_IRQ_PIN || pin == GPS_TX_PIN || pin == GPS_RX_PIN || pin == green_LED_PIN ||
pin == red_LED_PIN || pin == LED_BLUE) {
pin == LR1110_NRESET_PIN || pin == LR1110_IRQ_PIN || pin == GPS_TX_PIN || pin == GPS_RX_PIN || pin == LED_GREEN ||
pin == LED_RED || pin == LED_BLUE) {
continue;
}
pinMode(pin, OUTPUT);

8
variants/nrf52840/ELECROW-ThinkNode-M3/variant.h
View File

@@ -50,11 +50,11 @@ extern "C" {
#define EEPROM_POWER 7
// LED
#define red_LED_PIN 33
#define LED_POWER red_LED_PIN
#define LED_RED 33
#define LED_POWER LED_RED
#define LED_CHARGE LED_POWER // Signals the Status LED Module to handle this LED
#define green_LED_PIN 35
#define PIN_LED2 green_LED_PIN
#define LED_GREEN 35
#define PIN_LED2 LED_GREEN
#define LED_BLUE 37
#define LED_PAIRING LED_BLUE // Signals the Status LED Module to handle this LED

2
variants/nrf52840/MakePython_nRF52840_eink/variant.h
View File

@@ -29,8 +29,6 @@ extern "C" {
#define PIN_LED1 (32 + 10) // LED P1.15
#define PIN_LED2 (-1) //
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2

2
variants/nrf52840/MakePython_nRF52840_oled/variant.h
View File

@@ -29,8 +29,6 @@ extern "C" {
#define PIN_LED1 (32 + 10) // LED P1.15
#define PIN_LED2 (-1) //
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2

2
variants/nrf52840/TWC_mesh_v4/variant.h
View File

@@ -34,8 +34,6 @@ extern "C" {
// #define PIN_LED1 (32 + 9) Green
// #define PIN_LED1 (0 + 12) Blue
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2

2
variants/nrf52840/canaryone/variant.h
View File

@@ -52,8 +52,6 @@ extern "C" {
#define LED_BLUE PIN_LED1
#define LED_CONN PIN_LED3
#define LED_STATE_ON 0 // State when LED is lit
/*

1
variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/variant.h
View File

@@ -36,7 +36,6 @@ extern "C" {
#define PIN_LED3 LED_RED
#define PIN_LED PIN_LED1
#define LED_PWR (PINS_COUNT)
#define LED_STATE_ON 1 // State when LED is lit

4
variants/nrf52840/gat562_mesh_trial_tracker/variant.h
View File

@@ -48,8 +48,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -62,8 +60,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h
View File

@@ -137,8 +137,6 @@ No longer populated on PCB
#define PIN_SPI1_MOSI PIN_EINK_MOSI
#define PIN_SPI1_SCK PIN_EINK_SCLK
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

2
variants/nrf52840/heltec_mesh_node_t114/variant.h
View File

@@ -192,8 +192,6 @@ No longer populated on PCB
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

3
variants/nrf52840/heltec_mesh_pocket/variant.h
View File

@@ -26,7 +26,6 @@ extern "C" {
#define LED_RED PIN_LED1
#define LED_BLUE PIN_LED1
#define LED_GREEN PIN_LED1
#define LED_CONN LED_BLUE
#define LED_STATE_ON 0 // State when LED is lit
/*
@@ -99,8 +98,6 @@ No longer populated on PCB
#define PIN_SPI_MOSI (0 + 5)
#define PIN_SPI_SCK (0 + 4)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

2
variants/nrf52840/heltec_mesh_solar/variant.h
View File

@@ -132,8 +132,6 @@ No longer populated on PCB
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

4
variants/nrf52840/meshtiny/variant.h
View File

@@ -49,8 +49,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -65,8 +63,6 @@ extern "C" {
#define INPUTDRIVER_ENCODER_BTN 28
#define UPDOWN_LONG_PRESS_REPEAT_INTERVAL 150
#define CANNED_MESSAGE_MODULE_ENABLE 1
/*
* Buzzer - PWM
*/

4
variants/nrf52840/monteops_hw1/variant.h
View File

@@ -52,8 +52,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36) // Connected to WWAN host LED (if present)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -66,8 +64,6 @@ extern "C" {
// #define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

4
variants/nrf52840/nano-g2-ultra/variant.h
View File

@@ -50,8 +50,6 @@ extern "C" {
#define LED_BLUE PIN_LED1
#define LED_GREEN PIN_LED2
#define LED_CONN PIN_GREEN
#define LED_STATE_ON 0 // State when LED is lit
/*
@@ -152,8 +150,6 @@ External serial flash W25Q16JV_IQ
#define PIN_SPI_MOSI (0 + 11)
#define PIN_SPI_SCK (0 + 12)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER

2
variants/nrf52840/r1-neo/variant.h
View File

@@ -47,8 +47,6 @@ extern "C" {
#define PIN_LED1 (32 + 4) // P1.04 Controls Green LED
#define PIN_LED2 (28) // P0.28 Controls Blue LED
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2

4
variants/nrf52840/rak2560/variant.h
View File

@@ -48,8 +48,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -62,8 +60,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/rak3401_1watt/variant.h
View File

@@ -47,8 +47,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2

4
variants/nrf52840/rak4631/variant.h
View File

@@ -47,8 +47,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -61,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

4
variants/nrf52840/rak4631_epaper/variant.h
View File

@@ -47,8 +47,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -61,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

2
variants/nrf52840/rak4631_epaper_onrxtx/variant.h
View File

@@ -29,8 +29,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2

4
variants/nrf52840/rak4631_eth_gw/variant.h
View File

@@ -47,8 +47,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -61,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

4
variants/nrf52840/rak4631_nomadstar_meteor_pro/variant.h
View File

@@ -47,8 +47,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -61,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

4
variants/nrf52840/rak_wismeshtag/variant.h
View File

@@ -47,8 +47,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -61,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins

6
variants/nrf52840/rak_wismeshtap/variant.h
View File

@@ -47,8 +47,6 @@ extern "C" {
#define PIN_LED1 (35)
#define PIN_LED2 (36)
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
@@ -61,8 +59,6 @@ extern "C" {
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion such as the RAK14014 or RAK14015 TFT modules
#define BUTTON_NEED_PULLUP
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins
@@ -282,7 +278,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
#define RAK14014 // Tell it we have a RAK14014
#define USER_SETUP_LOADED 1
#define DISABLE_ALL_LIBRARY_WARNINGS 1
#define ST7789_DRIVER 1
#define TFT_WIDTH 240
#define TFT_HEIGHT 320
@@ -310,7 +305,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
#define USE_POWERSAVE
#define SLEEP_TIME 120
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define USE_VIRTUAL_KEYBOARD 1
/*----------------------------------------------------------------------------
* Arduino objects - C++ only

2
variants/nrf52840/seeed_solar_node/variant.h
View File

@@ -23,8 +23,6 @@
#define PIN_LED1 (12) // LED P1.15
#define PIN_LED2 (11) //
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
// #define LED_PIN PIN_LED2

4
variants/nrf52840/seeed_wio_tracker_L1/variant.h
View File

@@ -23,8 +23,6 @@
#define PIN_LED1 (11) // LED P1.15
#define PIN_LED2 (12) //
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
// #define LED_PIN PIN_LED2
@@ -157,8 +155,6 @@ static const uint8_t SCL = PIN_WIRE_SCL;
// joystick
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define CANNED_MESSAGE_ADD_CONFIRMATION 1
// trackball

3
variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h
View File

@@ -23,8 +23,6 @@
#define PIN_LED1 (11) // LED P1.15
#define PIN_LED2 (12) //
#define LED_CONN PIN_LED2
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
// #define LED_PIN PIN_LED2
@@ -176,7 +174,6 @@ static const uint8_t SCL = PIN_WIRE_SCL;
#define TB_PRESS 29
#define TB_DIRECTION FALLING
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define CANNED_MESSAGE_ADD_CONFIRMATION 1
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

1
variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h
View File

@@ -69,7 +69,6 @@ static const uint8_t A5 = PIN_A5;
#define PIN_LED2 LED_BLUE
#define PIN_LED3 LED_RED
#define LED_PWR LED_RED
#define USER_LED LED_BLUE
/*

1
variants/nrf52840/t-echo-lite/variant.h
View File

@@ -52,7 +52,6 @@ extern "C" {
#define BLE_LED LED_BLUE
#define BLE_LED_INVERTED 1
#define LED_CONN LED_GREEN
#define LED_STATE_ON 0 // State when LED is lit
// Buttons

2
variants/nrf52840/t-echo-plus/variant.h
View File

@@ -25,8 +25,6 @@ extern "C" {
#define LED_BLUE PIN_LED1
#define LED_GREEN PIN_LED2
#define LED_CONN LED_GREEN
#define LED_STATE_ON 0
// Buttons / touch

3
variants/nrf52840/t-echo/variant.h
View File

@@ -52,8 +52,6 @@ extern "C" {
#define LED_BLUE PIN_LED1
#define LED_GREEN PIN_LED2
#define LED_CONN PIN_GREEN
#define LED_STATE_ON 0 // State when LED is lit
/*
@@ -163,7 +161,6 @@ External serial flash WP25R1635FZUIL0
// Controls power for all peripherals (eink + GPS + LoRa + Sensor)
#define PIN_POWER_EN (0 + 12)
// #define PIN_POWER_EN1 (0 + 13)
#define PIN_SPI1_MISO \
(32 + 7) // FIXME not really needed, but for now the SPI code requires something to be defined, pick an used GPIO

1
variants/rp2040/rak11310/variant.h
View File

@@ -10,7 +10,6 @@
#define I2C_SDA1 2
#define I2C_SCL1 3
#define LED_CONN PIN_LED2
#define LED_PIN PIN_LED
#define ledOff(pin) pinMode(pin, INPUT)