Add a watchdog module to meshsolar. (#9337)

* add watchdog module

* Restore the code in power.h

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.github/workflows/models_issue_triage.yml

@@ -0,0 +1,204 @@
+name: Issue Triage (Models)
+
+on:
+  issues:
+    types: [opened]
+
+permissions:
+  issues: write
+  models: read
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.issue.number }}
+  cancel-in-progress: true
+
+jobs:
+  triage:
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event.issue.user.type != 'Bot' }}
+    runs-on: ubuntu-latest
+    steps:
+      # ─────────────────────────────────────────────────────────────────────────
+      # Step 1: Quality check (spam/AI-slop detection) - runs first, exits early if spam
+      # ─────────────────────────────────────────────────────────────────────────
+      - name: Detect spam or low-quality content
+        uses: actions/ai-inference@v2
+        id: quality
+        continue-on-error: true
+        with:
+          max-tokens: 20
+          prompt: |
+            Is this GitHub issue spam, AI-generated slop, or low quality?
+
+            Title: ${{ github.event.issue.title }}
+            Body: ${{ github.event.issue.body }}
+
+            Respond with exactly one of: spam, ai-generated, needs-review, ok
+          system-prompt: You detect spam and low-quality contributions. Be conservative - only flag obvious spam or AI slop.
+          model: openai/gpt-4o-mini
+
+      - name: Apply quality label if needed
+        if: steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
+        uses: actions/github-script@v8
+        env:
+          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
+        with:
+          script: |
+            const label = (process.env.QUALITY_LABEL || '').trim().toLowerCase();
+            const labelMeta = {
+              'spam': { color: 'd73a4a', description: 'Possible spam' },
+              'ai-generated': { color: 'fbca04', description: 'Possible AI-generated low-quality content' },
+              'needs-review': { color: 'f9d0c4', description: 'Needs human review' },
+            };
+            const meta = labelMeta[label];
+            if (!meta) return;
+
+            // Ensure label exists
+            try {
+              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
+            } catch (e) {
+              if (e.status !== 404) throw e;
+              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
+            }
+
+            // Apply label
+            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.issue.number, labels: [label] });
+
+            // Set output to skip remaining steps
+            core.setOutput('is_spam', 'true');
+
+      # ─────────────────────────────────────────────────────────────────────────
+      # Step 2: Duplicate detection - only if not spam
+      # ─────────────────────────────────────────────────────────────────────────
+      - name: Detect duplicate issues
+        if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
+        uses: pelikhan/action-genai-issue-dedup@bdb3b5d9451c1090ffcdf123d7447a5e7c7a2528 # v0.0.19
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+
+      # ─────────────────────────────────────────────────────────────────────────
+      # Step 3: Completeness check + auto-labeling (combined into one AI call)
+      # ─────────────────────────────────────────────────────────────────────────
+      - name: Determine if completeness check should be skipped
+        if: steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == ''
+        uses: actions/github-script@v8
+        id: check-skip
+        with:
+          script: |
+            const title = (context.payload.issue.title || '').toLowerCase();
+            const labels = (context.payload.issue.labels || []).map(label => label.name);
+            const hasFeatureRequest = title.includes('feature request');
+            const hasEnhancement = labels.includes('enhancement');
+            const shouldSkip = hasFeatureRequest && hasEnhancement;
+            core.setOutput('should_skip', shouldSkip ? 'true' : 'false');
+
+      - name: Analyze issue completeness and determine labels
+        if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true'
+        uses: actions/ai-inference@v2
+        id: analysis
+        continue-on-error: true
+        with:
+          prompt: |
+            Analyze this GitHub issue for completeness and determine if it needs labels.
+
+            If this looks like a bug on the device/firmware (crash, reboot, lockup, radio issues, GPS issues, display issues, power/sleep issues), request device logs and explain how to get them:
+
+            Web Flasher logs:
+            - Go to https://flasher.meshtastic.org
+            - Connect the device via USB and click Connect
+            - Open the device console/log output, reproduce the problem, then copy/download and attach/paste the logs
+
+            Meshtastic CLI logs:
+            - Run: meshtastic --port <serial-port> --noproto
+            - Reproduce the problem, then copy/paste the terminal output
+
+            Also request key context if missing: device model/variant, firmware version, region, steps to reproduce, expected vs actual.
+
+            Respond ONLY with JSON:
+            {
+              "complete": true|false,
+              "comment": "Your helpful comment requesting missing info, or empty string if complete",
+              "label": "needs-logs" | "needs-info" | "none"
+            }
+
+            Use "needs-logs" if this is a device bug AND no logs are attached.
+            Use "needs-info" if basic info like firmware version or steps to reproduce are missing.
+            Use "none" if the issue is complete or is a feature request.
+
+            Title: ${{ github.event.issue.title }}
+            Body: ${{ github.event.issue.body }}
+          system-prompt: You are a helpful assistant that triages GitHub issues. Be conservative with labels.
+          model: openai/gpt-4o-mini
+
+      - name: Process analysis result
+        if: (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '') && steps.check-skip.outputs.should_skip != 'true' && steps.analysis.outputs.response != ''
+        uses: actions/github-script@v8
+        id: process
+        env:
+          AI_RESPONSE: ${{ steps.analysis.outputs.response }}
+        with:
+          script: |
+            const raw = (process.env.AI_RESPONSE || '').trim();
+
+            let complete = false;
+            let comment = '';
+            let label = 'none';
+
+            try {
+              const parsed = JSON.parse(raw);
+              complete = !!parsed.complete;
+              comment = (parsed.comment ?? '').toString().trim();
+              label = (parsed.label ?? 'none').toString().trim().toLowerCase();
+            } catch {
+              // If JSON parse fails, treat as incomplete with raw response as comment
+              complete = false;
+              comment = raw;
+              label = 'none';
+            }
+
+            // Validate label
+            const allowedLabels = new Set(['needs-logs', 'needs-info', 'none']);
+            if (!allowedLabels.has(label)) label = 'none';
+
+            core.setOutput('should_comment', (!complete && comment.length > 0) ? 'true' : 'false');
+            core.setOutput('comment_body', comment);
+            core.setOutput('label', label);
+
+      - name: Apply triage label
+        if: steps.process.outputs.label != '' && steps.process.outputs.label != 'none'
+        uses: actions/github-script@v8
+        env:
+          LABEL_NAME: ${{ steps.process.outputs.label }}
+        with:
+          script: |
+            const label = process.env.LABEL_NAME;
+            const labelMeta = {
+              'needs-logs': { color: 'cfd3d7', description: 'Device logs requested for triage' },
+              'needs-info': { color: 'f9d0c4', description: 'More information requested for triage' },
+            };
+            const meta = labelMeta[label];
+            if (!meta) return;
+
+            // Ensure label exists
+            try {
+              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
+            } catch (e) {
+              if (e.status !== 404) throw e;
+              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
+            }
+
+            // Apply label
+            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.issue.number, labels: [label] });
+
+      - name: Comment on issue
+        if: steps.process.outputs.should_comment == 'true'
+        uses: actions/github-script@v8
+        env:
+          COMMENT_BODY: ${{ steps.process.outputs.comment_body }}
+        with:
+          script: |
+            await github.rest.issues.createComment({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.payload.issue.number,
+              body: process.env.COMMENT_BODY
+            });

.github/workflows/models_pr_triage.yml

@@ -0,0 +1,138 @@
+name: PR Triage (Models)
+
+on:
+  pull_request_target:
+    types: [opened]
+
+permissions:
+  pull-requests: write
+  issues: write
+  models: read
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
+  cancel-in-progress: true
+
+jobs:
+  triage:
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event.pull_request.user.type != 'Bot' }}
+    runs-on: ubuntu-latest
+    steps:
+      # ─────────────────────────────────────────────────────────────────────────
+      # Step 1: Check if PR already has automation/type labels (skip if so)
+      # ─────────────────────────────────────────────────────────────────────────
+      - name: Check existing labels
+        uses: actions/github-script@v8
+        id: check-labels
+        with:
+          script: |
+            const skipLabels = new Set(['automation']);
+            const typeLabels = new Set(['bugfix', 'hardware-support', 'enhancement', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup']);
+            const prLabels = context.payload.pull_request.labels.map(l => l.name);
+
+            const shouldSkipAll = prLabels.some(l => skipLabels.has(l));
+            const hasTypeLabel = prLabels.some(l => typeLabels.has(l));
+
+            core.setOutput('skip_all', shouldSkipAll ? 'true' : 'false');
+            core.setOutput('has_type_label', hasTypeLabel ? 'true' : 'false');
+
+      # ─────────────────────────────────────────────────────────────────────────
+      # Step 2: Quality check (spam/AI-slop detection)
+      # ─────────────────────────────────────────────────────────────────────────
+      - name: Detect spam or low-quality content
+        if: steps.check-labels.outputs.skip_all != 'true'
+        uses: actions/ai-inference@v2
+        id: quality
+        continue-on-error: true
+        with:
+          max-tokens: 20
+          prompt: |
+            Is this GitHub pull request spam, AI-generated slop, or low quality?
+
+            Title: ${{ github.event.pull_request.title }}
+            Body: ${{ github.event.pull_request.body }}
+
+            Respond with exactly one of: spam, ai-generated, needs-review, ok
+          system-prompt: You detect spam and low-quality contributions. Be conservative - only flag obvious spam or AI slop.
+          model: openai/gpt-4o-mini
+
+      - name: Apply quality label if needed
+        if: steps.check-labels.outputs.skip_all != 'true' && steps.quality.outputs.response != '' && steps.quality.outputs.response != 'ok'
+        uses: actions/github-script@v8
+        id: quality-label
+        env:
+          QUALITY_LABEL: ${{ steps.quality.outputs.response }}
+        with:
+          script: |
+            const label = (process.env.QUALITY_LABEL || '').trim().toLowerCase();
+            const labelMeta = {
+              'spam': { color: 'd73a4a', description: 'Possible spam' },
+              'ai-generated': { color: 'fbca04', description: 'Possible AI-generated low-quality content' },
+              'needs-review': { color: 'f9d0c4', description: 'Needs human review' },
+            };
+            const meta = labelMeta[label];
+            if (!meta) return;
+
+            // Ensure label exists
+            try {
+              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
+            } catch (e) {
+              if (e.status !== 404) throw e;
+              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
+            }
+
+            // Apply label
+            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.pull_request.number, labels: [label] });
+
+            core.setOutput('is_spam', 'true');
+
+      # ─────────────────────────────────────────────────────────────────────────
+      # Step 3: Auto-label PR type (bugfix/hardware-support/enhancement)
+      # ─────────────────────────────────────────────────────────────────────────
+      - name: Classify PR for labeling
+        if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && (steps.quality.outputs.response == 'ok' || steps.quality.outputs.response == '')
+        uses: actions/ai-inference@v2
+        id: classify
+        continue-on-error: true
+        with:
+          max-tokens: 30
+          prompt: |
+            Classify this pull request into exactly one category.
+
+            Return exactly one of: bugfix, hardware-support, enhancement
+
+            Use bugfix if it fixes a bug, crash, or incorrect behavior.
+            Use hardware-support if it adds or improves support for a specific hardware device/variant.
+            Use enhancement if it adds a new feature, improves performance, or refactors code.
+
+            Title: ${{ github.event.pull_request.title }}
+            Body: ${{ github.event.pull_request.body }}
+          system-prompt: You classify pull requests into categories. Be conservative and pick the most appropriate single label.
+          model: openai/gpt-4o-mini
+
+      - name: Apply type label
+        if: steps.check-labels.outputs.skip_all != 'true' && steps.check-labels.outputs.has_type_label != 'true' && steps.classify.outputs.response != ''
+        uses: actions/github-script@v8
+        env:
+          TYPE_LABEL: ${{ steps.classify.outputs.response }}
+        with:
+          script: |
+            const label = (process.env.TYPE_LABEL || '').trim().toLowerCase();
+            const labelMeta = {
+              'bugfix': { color: 'd73a4a', description: 'Bug fix' },
+              'hardware-support': { color: '0e8a16', description: 'Hardware support addition or improvement' },
+              'enhancement': { color: 'a2eeef', description: 'New feature or enhancement' },
+            };
+            const meta = labelMeta[label];
+            if (!meta) return;
+
+            // Ensure label exists
+            try {
+              await github.rest.issues.getLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label });
+            } catch (e) {
+              if (e.status !== 404) throw e;
+              await github.rest.issues.createLabel({ owner: context.repo.owner, repo: context.repo.repo, name: label, color: meta.color, description: meta.description });
+            }
+
+            // Apply label
+            await github.rest.issues.addLabels({ owner: context.repo.owner, repo: context.repo.repo, issue_number: context.payload.pull_request.number, labels: [label] });

platformio.ini

@@ -56,6 +56,7 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-DMESHTASTIC_EXCLUDE_POWERMON=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
+	-DLED_BUILTIN=-1
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
 	#-D OLED_PL=1
 	#-D DEBUG_HEAP=1 ; uncomment to add free heap space / memory leak debugging logs

src/input/InputBroker.cpp

@@ -1,8 +1,59 @@
 #include "InputBroker.h"
 #include "PowerFSM.h" // needed for event trigger
 #include "configuration.h"
+#include "graphics/Screen.h"
 #include "modules/ExternalNotificationModule.h"
 
+#if ARCH_PORTDUINO
+#include "input/LinuxInputImpl.h"
+#include "input/SeesawRotary.h"
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
+#if !MESHTASTIC_EXCLUDE_INPUTBROKER
+#include "input/ExpressLRSFiveWay.h"
+#include "input/RotaryEncoderImpl.h"
+#include "input/RotaryEncoderInterruptImpl1.h"
+#include "input/SerialKeyboardImpl.h"
+#include "input/UpDownInterruptImpl1.h"
+#include "input/i2cButton.h"
+#if HAS_TRACKBALL
+#include "input/TrackballInterruptImpl1.h"
+#endif
+
+#include "modules/StatusLEDModule.h"
+
+#if !MESHTASTIC_EXCLUDE_I2C
+#include "input/cardKbI2cImpl.h"
+#endif
+#include "input/kbMatrixImpl.h"
+#endif
+
+#if HAS_BUTTON || defined(ARCH_PORTDUINO)
+#include "input/ButtonThread.h"
+
+#if defined(BUTTON_PIN_TOUCH)
+ButtonThread *TouchButtonThread = nullptr;
+#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
+static bool touchBacklightWasOn = false;
+static bool touchBacklightActive = false;
+#endif
+#endif
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+ButtonThread *UserButtonThread = nullptr;
+#endif
+
+#if defined(ALT_BUTTON_PIN)
+ButtonThread *BackButtonThread = nullptr;
+#endif
+
+#if defined(CANCEL_BUTTON_PIN)
+ButtonThread *CancelButtonThread = nullptr;
+#endif
+
+#endif
+
 InputBroker *inputBroker = nullptr;
 
 InputBroker::InputBroker()
@@ -74,3 +125,262 @@ void InputBroker::pollSoonWorker(void *p)
     vTaskDelete(NULL);
 }
 #endif
+
+void InputBroker::Init()
+{
+
+#ifdef BUTTON_PIN
+#ifdef ARCH_ESP32
+
+#if ESP_ARDUINO_VERSION_MAJOR >= 3
+#ifdef BUTTON_NEED_PULLUP
+    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP);
+#else
+    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT); // default to BUTTON_PIN
+#endif
+#else
+    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT); // default to BUTTON_PIN
+#ifdef BUTTON_NEED_PULLUP
+    gpio_pullup_en((gpio_num_t)(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
+    delay(10);
+#endif
+#ifdef BUTTON_NEED_PULLUP2
+    gpio_pullup_en((gpio_num_t)BUTTON_NEED_PULLUP2);
+    delay(10);
+#endif
+#endif
+#endif
+#endif
+
+// buttons are now inputBroker, so have to come after setupModules
+#if HAS_BUTTON
+    int pullup_sense = 0;
+#ifdef INPUT_PULLUP_SENSE
+    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
+#ifdef BUTTON_SENSE_TYPE
+    pullup_sense = BUTTON_SENSE_TYPE;
+#else
+    pullup_sense = INPUT_PULLUP_SENSE;
+#endif
+#endif
+#if defined(ARCH_PORTDUINO)
+
+    if (portduino_config.userButtonPin.enabled) {
+
+        LOG_DEBUG("Use GPIO%02d for button", portduino_config.userButtonPin.pin);
+        UserButtonThread = new ButtonThread("UserButton");
+        if (screen) {
+            ButtonConfig config;
+            config.pinNumber = (uint8_t)portduino_config.userButtonPin.pin;
+            config.activeLow = true;
+            config.activePullup = true;
+            config.pullupSense = INPUT_PULLUP;
+            config.intRoutine = []() {
+                UserButtonThread->userButton.tick();
+                UserButtonThread->setIntervalFromNow(0);
+                runASAP = true;
+                BaseType_t higherWake = 0;
+                concurrency::mainDelay.interruptFromISR(&higherWake);
+            };
+            config.singlePress = INPUT_BROKER_USER_PRESS;
+            config.longPress = INPUT_BROKER_SELECT;
+            UserButtonThread->initButton(config);
+        }
+    }
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    TouchButtonThread = new ButtonThread("BackButton");
+    ButtonConfig touchConfig;
+    touchConfig.pinNumber = BUTTON_PIN_TOUCH;
+    touchConfig.activeLow = true;
+    touchConfig.activePullup = true;
+    touchConfig.pullupSense = pullup_sense;
+    touchConfig.intRoutine = []() {
+        TouchButtonThread->userButton.tick();
+        TouchButtonThread->setIntervalFromNow(0);
+        runASAP = true;
+        BaseType_t higherWake = 0;
+        concurrency::mainDelay.interruptFromISR(&higherWake);
+    };
+    touchConfig.singlePress = INPUT_BROKER_NONE;
+    touchConfig.longPress = INPUT_BROKER_BACK;
+#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
+    // On T-Echo Plus the touch pad should only drive the backlight, not UI navigation/sounds
+    touchConfig.longPress = INPUT_BROKER_NONE;
+    touchConfig.suppressLeadUpSound = true;
+    touchConfig.onPress = []() {
+        touchBacklightWasOn = uiconfig.screen_brightness == 1;
+        if (!touchBacklightWasOn) {
+            digitalWrite(PIN_EINK_EN, HIGH);
+        }
+        touchBacklightActive = true;
+    };
+    touchConfig.onRelease = []() {
+        if (touchBacklightActive && !touchBacklightWasOn) {
+            digitalWrite(PIN_EINK_EN, LOW);
+        }
+        touchBacklightActive = false;
+    };
+#endif
+    TouchButtonThread->initButton(touchConfig);
+#endif
+
+#if defined(CANCEL_BUTTON_PIN)
+    // Buttons. Moved here cause we need NodeDB to be initialized
+    CancelButtonThread = new ButtonThread("CancelButton");
+    ButtonConfig cancelConfig;
+    cancelConfig.pinNumber = CANCEL_BUTTON_PIN;
+    cancelConfig.activeLow = CANCEL_BUTTON_ACTIVE_LOW;
+    cancelConfig.activePullup = CANCEL_BUTTON_ACTIVE_PULLUP;
+    cancelConfig.pullupSense = pullup_sense;
+    cancelConfig.intRoutine = []() {
+        CancelButtonThread->userButton.tick();
+        CancelButtonThread->setIntervalFromNow(0);
+        runASAP = true;
+        BaseType_t higherWake = 0;
+        concurrency::mainDelay.interruptFromISR(&higherWake);
+    };
+    cancelConfig.singlePress = INPUT_BROKER_CANCEL;
+    cancelConfig.longPress = INPUT_BROKER_SHUTDOWN;
+    cancelConfig.longPressTime = 4000;
+    CancelButtonThread->initButton(cancelConfig);
+#endif
+
+#if defined(ALT_BUTTON_PIN)
+    // Buttons. Moved here cause we need NodeDB to be initialized
+    BackButtonThread = new ButtonThread("BackButton");
+    ButtonConfig backConfig;
+    backConfig.pinNumber = ALT_BUTTON_PIN;
+    backConfig.activeLow = ALT_BUTTON_ACTIVE_LOW;
+    backConfig.activePullup = ALT_BUTTON_ACTIVE_PULLUP;
+    backConfig.pullupSense = pullup_sense;
+    backConfig.intRoutine = []() {
+        BackButtonThread->userButton.tick();
+        BackButtonThread->setIntervalFromNow(0);
+        runASAP = true;
+        BaseType_t higherWake = 0;
+        concurrency::mainDelay.interruptFromISR(&higherWake);
+    };
+    backConfig.singlePress = INPUT_BROKER_ALT_PRESS;
+    backConfig.longPress = INPUT_BROKER_ALT_LONG;
+    backConfig.longPressTime = 500;
+    BackButtonThread->initButton(backConfig);
+#endif
+
+#if defined(BUTTON_PIN)
+#if defined(USERPREFS_BUTTON_PIN)
+    int _pinNum = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN;
+#else
+    int _pinNum = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;
+#endif
+#ifndef BUTTON_ACTIVE_LOW
+#define BUTTON_ACTIVE_LOW true
+#endif
+#ifndef BUTTON_ACTIVE_PULLUP
+#define BUTTON_ACTIVE_PULLUP true
+#endif
+
+    // Buttons. Moved here cause we need NodeDB to be initialized
+    // If your variant.h has a BUTTON_PIN defined, go ahead and define BUTTON_ACTIVE_LOW and BUTTON_ACTIVE_PULLUP
+    UserButtonThread = new ButtonThread("UserButton");
+    if (screen) {
+        ButtonConfig userConfig;
+        userConfig.pinNumber = (uint8_t)_pinNum;
+        userConfig.activeLow = BUTTON_ACTIVE_LOW;
+        userConfig.activePullup = BUTTON_ACTIVE_PULLUP;
+        userConfig.pullupSense = pullup_sense;
+        userConfig.intRoutine = []() {
+            UserButtonThread->userButton.tick();
+            UserButtonThread->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+            concurrency::mainDelay.interruptFromISR(&higherWake);
+        };
+        userConfig.singlePress = INPUT_BROKER_USER_PRESS;
+        userConfig.longPress = INPUT_BROKER_SELECT;
+        userConfig.longPressTime = 500;
+        userConfig.longLongPress = INPUT_BROKER_SHUTDOWN;
+        UserButtonThread->initButton(userConfig);
+    } else {
+        ButtonConfig userConfigNoScreen;
+        userConfigNoScreen.pinNumber = (uint8_t)_pinNum;
+        userConfigNoScreen.activeLow = BUTTON_ACTIVE_LOW;
+        userConfigNoScreen.activePullup = BUTTON_ACTIVE_PULLUP;
+        userConfigNoScreen.pullupSense = pullup_sense;
+        userConfigNoScreen.intRoutine = []() {
+            UserButtonThread->userButton.tick();
+            UserButtonThread->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+            concurrency::mainDelay.interruptFromISR(&higherWake);
+        };
+        userConfigNoScreen.singlePress = INPUT_BROKER_USER_PRESS;
+        userConfigNoScreen.longPress = INPUT_BROKER_NONE;
+        userConfigNoScreen.longPressTime = 500;
+        userConfigNoScreen.longLongPress = INPUT_BROKER_SHUTDOWN;
+        userConfigNoScreen.doublePress = INPUT_BROKER_SEND_PING;
+        userConfigNoScreen.triplePress = INPUT_BROKER_GPS_TOGGLE;
+        UserButtonThread->initButton(userConfigNoScreen);
+    }
+#endif
+#endif
+
+#if (HAS_BUTTON || ARCH_PORTDUINO) && !MESHTASTIC_EXCLUDE_INPUTBROKER
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
+#if defined(T_LORA_PAGER)
+        // use a special FSM based rotary encoder version for T-LoRa Pager
+        rotaryEncoderImpl = new RotaryEncoderImpl();
+        if (!rotaryEncoderImpl->init()) {
+            delete rotaryEncoderImpl;
+            rotaryEncoderImpl = nullptr;
+        }
+#elif defined(INPUTDRIVER_ENCODER_TYPE) && (INPUTDRIVER_ENCODER_TYPE == 2)
+        upDownInterruptImpl1 = new UpDownInterruptImpl1();
+        if (!upDownInterruptImpl1->init()) {
+            delete upDownInterruptImpl1;
+            upDownInterruptImpl1 = nullptr;
+        }
+#else
+        rotaryEncoderInterruptImpl1 = new RotaryEncoderInterruptImpl1();
+        if (!rotaryEncoderInterruptImpl1->init()) {
+            delete rotaryEncoderInterruptImpl1;
+            rotaryEncoderInterruptImpl1 = nullptr;
+        }
+#endif
+        cardKbI2cImpl = new CardKbI2cImpl();
+        cardKbI2cImpl->init();
+#if defined(M5STACK_UNITC6L)
+        i2cButton = new i2cButtonThread("i2cButtonThread");
+#endif
+#ifdef INPUTBROKER_MATRIX_TYPE
+        kbMatrixImpl = new KbMatrixImpl();
+        kbMatrixImpl->init();
+#endif // INPUTBROKER_MATRIX_TYPE
+#ifdef INPUTBROKER_SERIAL_TYPE
+        aSerialKeyboardImpl = new SerialKeyboardImpl();
+        aSerialKeyboardImpl->init();
+#endif // INPUTBROKER_MATRIX_TYPE
+    }
+#endif // HAS_BUTTON
+#if ARCH_PORTDUINO
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR && portduino_config.i2cdev != "") {
+        seesawRotary = new SeesawRotary("SeesawRotary");
+        if (!seesawRotary->init()) {
+            delete seesawRotary;
+            seesawRotary = nullptr;
+        }
+        aLinuxInputImpl = new LinuxInputImpl();
+        aLinuxInputImpl->init();
+    }
+#endif
+#if !MESHTASTIC_EXCLUDE_INPUTBROKER && HAS_TRACKBALL
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
+        trackballInterruptImpl1 = new TrackballInterruptImpl1();
+        trackballInterruptImpl1->init(TB_DOWN, TB_UP, TB_LEFT, TB_RIGHT, TB_PRESS);
+    }
+#endif
+#ifdef INPUTBROKER_EXPRESSLRSFIVEWAY_TYPE
+    expressLRSFiveWayInput = new ExpressLRSFiveWay();
+#endif
+}

src/input/InputBroker.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "Observer.h"
+#include "concurrency/OSThread.h"
 #include "freertosinc.h"
 
 #ifdef InputBrokerDebug
@@ -76,6 +77,7 @@ class InputBroker : public Observable<const InputEvent *>
     void queueInputEvent(const InputEvent *event);
     void processInputEventQueue();
 #endif
+    void Init();
 
   protected:
     int handleInputEvent(const InputEvent *event);
@@ -89,4 +91,5 @@ class InputBroker : public Observable<const InputEvent *>
 #endif
 };
 
-extern InputBroker *inputBroker;
+extern InputBroker *inputBroker;
+extern bool runASAP;

src/main.cpp

@@ -120,31 +120,6 @@ void printPartitionTable()
 #endif // DEBUG_PARTITION_TABLE
 #endif // ARCH_ESP32
 
-#if HAS_BUTTON || defined(ARCH_PORTDUINO)
-#include "input/ButtonThread.h"
-
-#if defined(BUTTON_PIN_TOUCH)
-ButtonThread *TouchButtonThread = nullptr;
-#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
-static bool touchBacklightWasOn = false;
-static bool touchBacklightActive = false;
-#endif
-#endif
-
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
-ButtonThread *UserButtonThread = nullptr;
-#endif
-
-#if defined(ALT_BUTTON_PIN)
-ButtonThread *BackButtonThread = nullptr;
-#endif
-
-#if defined(CANCEL_BUTTON_PIN)
-ButtonThread *CancelButtonThread = nullptr;
-#endif
-
-#endif
-
 #include "AmbientLightingThread.h"
 #include "PowerFSMThread.h"
 
@@ -509,30 +484,6 @@ void setup()
     LOG_INFO("Wait for peripherals to stabilize");
     delay(PERIPHERAL_WARMUP_MS);
 #endif
-
-#ifdef BUTTON_PIN
-#ifdef ARCH_ESP32
-
-#if ESP_ARDUINO_VERSION_MAJOR >= 3
-#ifdef BUTTON_NEED_PULLUP
-    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP);
-#else
-    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT); // default to BUTTON_PIN
-#endif
-#else
-    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT); // default to BUTTON_PIN
-#ifdef BUTTON_NEED_PULLUP
-    gpio_pullup_en((gpio_num_t)(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
-    delay(10);
-#endif
-#ifdef BUTTON_NEED_PULLUP2
-    gpio_pullup_en((gpio_num_t)BUTTON_NEED_PULLUP2);
-    delay(10);
-#endif
-#endif
-#endif
-#endif
-
     initSPI();
 
     OSThread::setup();
@@ -999,180 +950,9 @@ void setup()
         nodeDB->hasWarned = true;
     }
 #endif
-
-// buttons are now inputBroker, so have to come after setupModules
-#if HAS_BUTTON
-    int pullup_sense = 0;
-#ifdef INPUT_PULLUP_SENSE
-    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-#ifdef BUTTON_SENSE_TYPE
-    pullup_sense = BUTTON_SENSE_TYPE;
-#else
-    pullup_sense = INPUT_PULLUP_SENSE;
-#endif
-#endif
-#if defined(ARCH_PORTDUINO)
-
-    if (portduino_config.userButtonPin.enabled) {
-
-        LOG_DEBUG("Use GPIO%02d for button", portduino_config.userButtonPin.pin);
-        UserButtonThread = new ButtonThread("UserButton");
-        if (screen) {
-            ButtonConfig config;
-            config.pinNumber = (uint8_t)portduino_config.userButtonPin.pin;
-            config.activeLow = true;
-            config.activePullup = true;
-            config.pullupSense = INPUT_PULLUP;
-            config.intRoutine = []() {
-                UserButtonThread->userButton.tick();
-                UserButtonThread->setIntervalFromNow(0);
-                runASAP = true;
-                BaseType_t higherWake = 0;
-                mainDelay.interruptFromISR(&higherWake);
-            };
-            config.singlePress = INPUT_BROKER_USER_PRESS;
-            config.longPress = INPUT_BROKER_SELECT;
-            UserButtonThread->initButton(config);
-        }
-    }
-#endif
-
-#ifdef BUTTON_PIN_TOUCH
-    TouchButtonThread = new ButtonThread("BackButton");
-    ButtonConfig touchConfig;
-    touchConfig.pinNumber = BUTTON_PIN_TOUCH;
-    touchConfig.activeLow = true;
-    touchConfig.activePullup = true;
-    touchConfig.pullupSense = pullup_sense;
-    touchConfig.intRoutine = []() {
-        TouchButtonThread->userButton.tick();
-        TouchButtonThread->setIntervalFromNow(0);
-        runASAP = true;
-        BaseType_t higherWake = 0;
-        mainDelay.interruptFromISR(&higherWake);
-    };
-    touchConfig.singlePress = INPUT_BROKER_NONE;
-    touchConfig.longPress = INPUT_BROKER_BACK;
-#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
-    // On T-Echo Plus the touch pad should only drive the backlight, not UI navigation/sounds
-    touchConfig.longPress = INPUT_BROKER_NONE;
-    touchConfig.suppressLeadUpSound = true;
-    touchConfig.onPress = []() {
-        touchBacklightWasOn = uiconfig.screen_brightness == 1;
-        if (!touchBacklightWasOn) {
-            digitalWrite(PIN_EINK_EN, HIGH);
-        }
-        touchBacklightActive = true;
-    };
-    touchConfig.onRelease = []() {
-        if (touchBacklightActive && !touchBacklightWasOn) {
-            digitalWrite(PIN_EINK_EN, LOW);
-        }
-        touchBacklightActive = false;
-    };
-#endif
-    TouchButtonThread->initButton(touchConfig);
-#endif
-
-#if defined(CANCEL_BUTTON_PIN)
-    // Buttons. Moved here cause we need NodeDB to be initialized
-    CancelButtonThread = new ButtonThread("CancelButton");
-    ButtonConfig cancelConfig;
-    cancelConfig.pinNumber = CANCEL_BUTTON_PIN;
-    cancelConfig.activeLow = CANCEL_BUTTON_ACTIVE_LOW;
-    cancelConfig.activePullup = CANCEL_BUTTON_ACTIVE_PULLUP;
-    cancelConfig.pullupSense = pullup_sense;
-    cancelConfig.intRoutine = []() {
-        CancelButtonThread->userButton.tick();
-        CancelButtonThread->setIntervalFromNow(0);
-        runASAP = true;
-        BaseType_t higherWake = 0;
-        mainDelay.interruptFromISR(&higherWake);
-    };
-    cancelConfig.singlePress = INPUT_BROKER_CANCEL;
-    cancelConfig.longPress = INPUT_BROKER_SHUTDOWN;
-    cancelConfig.longPressTime = 4000;
-    CancelButtonThread->initButton(cancelConfig);
-#endif
-
-#if defined(ALT_BUTTON_PIN)
-    // Buttons. Moved here cause we need NodeDB to be initialized
-    BackButtonThread = new ButtonThread("BackButton");
-    ButtonConfig backConfig;
-    backConfig.pinNumber = ALT_BUTTON_PIN;
-    backConfig.activeLow = ALT_BUTTON_ACTIVE_LOW;
-    backConfig.activePullup = ALT_BUTTON_ACTIVE_PULLUP;
-    backConfig.pullupSense = pullup_sense;
-    backConfig.intRoutine = []() {
-        BackButtonThread->userButton.tick();
-        BackButtonThread->setIntervalFromNow(0);
-        runASAP = true;
-        BaseType_t higherWake = 0;
-        mainDelay.interruptFromISR(&higherWake);
-    };
-    backConfig.singlePress = INPUT_BROKER_ALT_PRESS;
-    backConfig.longPress = INPUT_BROKER_ALT_LONG;
-    backConfig.longPressTime = 500;
-    BackButtonThread->initButton(backConfig);
-#endif
-
-#if defined(BUTTON_PIN)
-#if defined(USERPREFS_BUTTON_PIN)
-    int _pinNum = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN;
-#else
-    int _pinNum = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;
-#endif
-#ifndef BUTTON_ACTIVE_LOW
-#define BUTTON_ACTIVE_LOW true
-#endif
-#ifndef BUTTON_ACTIVE_PULLUP
-#define BUTTON_ACTIVE_PULLUP true
-#endif
-
-    // Buttons. Moved here cause we need NodeDB to be initialized
-    // If your variant.h has a BUTTON_PIN defined, go ahead and define BUTTON_ACTIVE_LOW and BUTTON_ACTIVE_PULLUP
-    UserButtonThread = new ButtonThread("UserButton");
-    if (screen) {
-        ButtonConfig userConfig;
-        userConfig.pinNumber = (uint8_t)_pinNum;
-        userConfig.activeLow = BUTTON_ACTIVE_LOW;
-        userConfig.activePullup = BUTTON_ACTIVE_PULLUP;
-        userConfig.pullupSense = pullup_sense;
-        userConfig.intRoutine = []() {
-            UserButtonThread->userButton.tick();
-            UserButtonThread->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-        };
-        userConfig.singlePress = INPUT_BROKER_USER_PRESS;
-        userConfig.longPress = INPUT_BROKER_SELECT;
-        userConfig.longPressTime = 500;
-        userConfig.longLongPress = INPUT_BROKER_SHUTDOWN;
-        UserButtonThread->initButton(userConfig);
-    } else {
-        ButtonConfig userConfigNoScreen;
-        userConfigNoScreen.pinNumber = (uint8_t)_pinNum;
-        userConfigNoScreen.activeLow = BUTTON_ACTIVE_LOW;
-        userConfigNoScreen.activePullup = BUTTON_ACTIVE_PULLUP;
-        userConfigNoScreen.pullupSense = pullup_sense;
-        userConfigNoScreen.intRoutine = []() {
-            UserButtonThread->userButton.tick();
-            UserButtonThread->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-        };
-        userConfigNoScreen.singlePress = INPUT_BROKER_USER_PRESS;
-        userConfigNoScreen.longPress = INPUT_BROKER_NONE;
-        userConfigNoScreen.longPressTime = 500;
-        userConfigNoScreen.longLongPress = INPUT_BROKER_SHUTDOWN;
-        userConfigNoScreen.doublePress = INPUT_BROKER_SEND_PING;
-        userConfigNoScreen.triplePress = INPUT_BROKER_GPS_TOGGLE;
-        UserButtonThread->initButton(userConfigNoScreen);
-    }
-#endif
-
+#if !MESHTASTIC_EXCLUDE_INPUTBROKER
+    if (inputBroker)
+        inputBroker->Init();
 #endif
 
 #ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/mesh/ReliableRouter.cpp

@@ -17,12 +17,6 @@
 ErrorCode ReliableRouter::send(meshtastic_MeshPacket *p)
 {
     if (p->want_ack) {
-        // If someone asks for acks on broadcast, we need the hop limit to be at least one, so that first node that receives our
-        // message will rebroadcast.  But asking for hop_limit 0 in that context means the client app has no preference on hop
-        // counts and we want this message to get through the whole mesh, so use the default.
-        if (p->hop_limit == 0) {
-            p->hop_limit = Default::getConfiguredOrDefaultHopLimit(config.lora.hop_limit);
-        }
         DEBUG_HEAP_BEFORE;
         auto copy = packetPool.allocCopy(*p);
         DEBUG_HEAP_AFTER("ReliableRouter::send", copy);

src/mesh/Router.cpp

@@ -266,6 +266,13 @@ ErrorCode Router::sendLocal(meshtastic_MeshPacket *p, RxSource src)
             }
         }
 
+        // If someone asks for acks on broadcast, we need the hop limit to be at least one, so that first node that receives our
+        // message will rebroadcast.  But asking for hop_limit 0 in that context means the client app has no preference on hop
+        // counts and we want this message to get through the whole mesh, so use the default.
+        if (src == RX_SRC_USER && p->want_ack && p->hop_limit == 0) {
+            p->hop_limit = Default::getConfiguredOrDefaultHopLimit(config.lora.hop_limit);
+        }
+
         return send(p);
     }
 }

src/modules/ExternalNotificationModule.cpp

@@ -442,6 +442,7 @@ ExternalNotificationModule::ExternalNotificationModule()
 
 ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshPacket &mp)
 {
+    // Trigger external notification if enabled and not muted; isSilenced is from temporary mute toggles
     if (moduleConfig.external_notification.enabled && !isSilenced) {
 #ifdef T_WATCH_S3
         drv.setWaveform(0, 75);
@@ -456,6 +457,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
             for (size_t i = 0; i < p.payload.size; i++) {
                 if (p.payload.bytes[i] == ASCII_BELL) {
                     containsBell = true;
+                    break;
                 }
             }
 
@@ -465,90 +467,47 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
             // If we receive a broadcast message, apply channel mute setting
             // If we receive a direct message and the receipent is us, apply DM mute setting
             // Else we just handle it as not muted.
-            const bool directToUs = !isBroadcast(mp.to) && isToUs(&mp);
-            bool is_muted = directToUs ? (sender && ((sender->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK) != 0))
-                                       : (ch.settings.has_module_settings && ch.settings.module_settings.is_muted);
+            const bool isDmToUs = !isBroadcast(mp.to) && isToUs(&mp);
+            bool is_muted = isDmToUs ? (sender && ((sender->bitfield & NODEINFO_BITFIELD_IS_MUTED_MASK) != 0))
+                                     : (ch.settings.has_module_settings && ch.settings.module_settings.is_muted);
 
-            if (moduleConfig.external_notification.alert_bell) {
-                if (containsBell) {
-                    LOG_INFO("externalNotificationModule - Notification Bell");
+            const bool buzzerModeIsDirectOnly =
+                (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY);
+
+            if (containsBell || !is_muted) {
+                if (moduleConfig.external_notification.alert_bell || moduleConfig.external_notification.alert_message ||
+                    moduleConfig.external_notification.alert_bell_vibra ||
+                    moduleConfig.external_notification.alert_message_vibra ||
+                    ((moduleConfig.external_notification.alert_bell_buzzer ||
+                      moduleConfig.external_notification.alert_message_buzzer) &&
+                     canBuzz())) {
+                    nagCycleCutoff = millis() + (moduleConfig.external_notification.nag_timeout
+                                                     ? (moduleConfig.external_notification.nag_timeout * 1000)
+                                                     : moduleConfig.external_notification.output_ms);
+                    LOG_INFO("Toggling nagCycleCutoff to %lu", nagCycleCutoff);
                     isNagging = true;
+                }
+
+                if (moduleConfig.external_notification.alert_bell || moduleConfig.external_notification.alert_message) {
+                    LOG_INFO("externalNotificationModule - Notification Module or Bell");
                     setExternalState(0, true);
-                    if (moduleConfig.external_notification.nag_timeout) {
-                        nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
-                    } else {
-                        nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
-                    }
                 }
-            }
 
-            if (moduleConfig.external_notification.alert_bell_vibra) {
-                if (containsBell) {
-                    LOG_INFO("externalNotificationModule - Notification Bell (Vibra)");
-                    isNagging = true;
+                if (moduleConfig.external_notification.alert_bell_vibra ||
+                    moduleConfig.external_notification.alert_message_vibra) {
+                    LOG_INFO("externalNotificationModule - Notification Module or Bell (Vibra)");
                     setExternalState(1, true);
-                    if (moduleConfig.external_notification.nag_timeout) {
-                        nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
+                }
+
+                if ((moduleConfig.external_notification.alert_bell_buzzer ||
+                     moduleConfig.external_notification.alert_message_buzzer) &&
+                    canBuzz()) {
+                    LOG_INFO("externalNotificationModule - Notification Module or Bell (Buzzer)");
+                    if (buzzerModeIsDirectOnly && !isDmToUs && !containsBell) {
+                        LOG_INFO("Message buzzer was suppressed because buzzer mode DIRECT_MSG_ONLY");
                     } else {
-                        nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
-                    }
-                }
-            }
-
-            if (moduleConfig.external_notification.alert_bell_buzzer && canBuzz()) {
-                if (containsBell) {
-                    LOG_INFO("externalNotificationModule - Notification Bell (Buzzer)");
-                    isNagging = true;
-                    if (!moduleConfig.external_notification.use_pwm && !moduleConfig.external_notification.use_i2s_as_buzzer) {
-                        setExternalState(2, true);
-                    } else {
-#ifdef HAS_I2S
-                        if (moduleConfig.external_notification.use_i2s_as_buzzer) {
-                            audioThread->beginRttl(rtttlConfig.ringtone, strlen_P(rtttlConfig.ringtone));
-                        } else
-#endif
-                            if (moduleConfig.external_notification.use_pwm) {
-                            rtttl::begin(config.device.buzzer_gpio, rtttlConfig.ringtone);
-                        }
-                    }
-                    if (moduleConfig.external_notification.nag_timeout) {
-                        nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
-                    } else {
-                        nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
-                    }
-                }
-            }
-
-            if (moduleConfig.external_notification.alert_message && !is_muted) {
-                LOG_INFO("externalNotificationModule - Notification Module");
-                isNagging = true;
-                setExternalState(0, true);
-                if (moduleConfig.external_notification.nag_timeout) {
-                    nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
-                } else {
-                    nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
-                }
-            }
-
-            if (moduleConfig.external_notification.alert_message_vibra && !is_muted) {
-                LOG_INFO("externalNotificationModule - Notification Module (Vibra)");
-                isNagging = true;
-                setExternalState(1, true);
-                if (moduleConfig.external_notification.nag_timeout) {
-                    nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
-                } else {
-                    nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
-                }
-            }
-
-            if (moduleConfig.external_notification.alert_message_buzzer && !is_muted) {
-                LOG_INFO("externalNotificationModule - Notification Module (Buzzer)");
-                if (config.device.buzzer_mode != meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY ||
-                    (!isBroadcast(mp.to) && isToUs(&mp))) {
-                    // Buzz if buzzer mode is not in DIRECT_MSG_ONLY or is DM to us
-                    isNagging = true;
+                        // Buzz if buzzer mode is not in DIRECT_MSG_ONLY or is DM to us
 #ifdef T_LORA_PAGER
-                    if (canBuzz()) {
                         drv.setWaveform(0, 16); // Long buzzer 100%
                         drv.setWaveform(1, 0);  // Pause
                         drv.setWaveform(2, 16);
@@ -558,11 +517,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
                         drv.setWaveform(6, 16);
                         drv.setWaveform(7, 0);
                         drv.go();
-                    }
 #endif
-                    if (!moduleConfig.external_notification.use_pwm && !moduleConfig.external_notification.use_i2s_as_buzzer) {
-                        setExternalState(2, true);
-                    } else {
 #ifdef HAS_I2S
                         if (moduleConfig.external_notification.use_i2s_as_buzzer) {
                             audioThread->beginRttl(rtttlConfig.ringtone, strlen_P(rtttlConfig.ringtone));
@@ -570,18 +525,13 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
 #endif
                             if (moduleConfig.external_notification.use_pwm) {
                             rtttl::begin(config.device.buzzer_gpio, rtttlConfig.ringtone);
+                        } else {
+                            setExternalState(2, true);
                         }
                     }
-                    if (moduleConfig.external_notification.nag_timeout) {
-                        nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
-                    } else {
-                        nagCycleCutoff = millis() + moduleConfig.external_notification.output_ms;
-                    }
-                } else {
-                    // Don't beep if buzzer mode is "direct messages only" and it is no direct message
-                    LOG_INFO("Message buzzer was suppressed because buzzer mode DIRECT_MSG_ONLY");
                 }
             }
+
             setIntervalFromNow(0); // run once so we know if we should do something
         }
     } else {

src/modules/Modules.cpp

@@ -1,24 +1,8 @@
 #include "configuration.h"
 #if !MESHTASTIC_EXCLUDE_INPUTBROKER
 #include "buzz/BuzzerFeedbackThread.h"
-#include "input/ExpressLRSFiveWay.h"
-#include "input/InputBroker.h"
-#include "input/RotaryEncoderImpl.h"
-#include "input/RotaryEncoderInterruptImpl1.h"
-#include "input/SerialKeyboardImpl.h"
-#include "input/UpDownInterruptImpl1.h"
-#include "input/i2cButton.h"
-#include "modules/SystemCommandsModule.h"
-#if HAS_TRACKBALL
-#include "input/TrackballInterruptImpl1.h"
-#endif
-
 #include "modules/StatusLEDModule.h"
-
-#if !MESHTASTIC_EXCLUDE_I2C
-#include "input/cardKbI2cImpl.h"
-#endif
-#include "input/kbMatrixImpl.h"
+#include "modules/SystemCommandsModule.h"
 #endif
 #if !MESHTASTIC_EXCLUDE_PKI
 #include "KeyVerificationModule.h"
@@ -59,8 +43,6 @@
 #include "modules/WaypointModule.h"
 #endif
 #if ARCH_PORTDUINO
-#include "input/LinuxInputImpl.h"
-#include "input/SeesawRotary.h"
 #include "modules/Telemetry/HostMetrics.h"
 #if !MESHTASTIC_EXCLUDE_STOREFORWARD
 #include "modules/StoreForwardModule.h"
@@ -109,6 +91,9 @@
 #include "modules/DropzoneModule.h"
 #endif
 
+#if defined(HAS_HARDWARE_WATCHDOG)
+#include "watchdog/watchdogThread.h"
+#endif
 /**
  * Create module instances here.  If you are adding a new module, you must 'new' it here (or somewhere else)
  */
@@ -179,63 +164,6 @@ void setupModules()
 #endif
     // Example: Put your module here
     // new ReplyModule();
-#if (HAS_BUTTON || ARCH_PORTDUINO) && !MESHTASTIC_EXCLUDE_INPUTBROKER
-    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-#if defined(T_LORA_PAGER)
-        // use a special FSM based rotary encoder version for T-LoRa Pager
-        rotaryEncoderImpl = new RotaryEncoderImpl();
-        if (!rotaryEncoderImpl->init()) {
-            delete rotaryEncoderImpl;
-            rotaryEncoderImpl = nullptr;
-        }
-#elif defined(INPUTDRIVER_ENCODER_TYPE) && (INPUTDRIVER_ENCODER_TYPE == 2)
-        upDownInterruptImpl1 = new UpDownInterruptImpl1();
-        if (!upDownInterruptImpl1->init()) {
-            delete upDownInterruptImpl1;
-            upDownInterruptImpl1 = nullptr;
-        }
-#else
-        rotaryEncoderInterruptImpl1 = new RotaryEncoderInterruptImpl1();
-        if (!rotaryEncoderInterruptImpl1->init()) {
-            delete rotaryEncoderInterruptImpl1;
-            rotaryEncoderInterruptImpl1 = nullptr;
-        }
-#endif
-        cardKbI2cImpl = new CardKbI2cImpl();
-        cardKbI2cImpl->init();
-#if defined(M5STACK_UNITC6L)
-        i2cButton = new i2cButtonThread("i2cButtonThread");
-#endif
-#ifdef INPUTBROKER_MATRIX_TYPE
-        kbMatrixImpl = new KbMatrixImpl();
-        kbMatrixImpl->init();
-#endif // INPUTBROKER_MATRIX_TYPE
-#ifdef INPUTBROKER_SERIAL_TYPE
-        aSerialKeyboardImpl = new SerialKeyboardImpl();
-        aSerialKeyboardImpl->init();
-#endif // INPUTBROKER_MATRIX_TYPE
-    }
-#endif // HAS_BUTTON
-#if ARCH_PORTDUINO
-    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR && portduino_config.i2cdev != "") {
-        seesawRotary = new SeesawRotary("SeesawRotary");
-        if (!seesawRotary->init()) {
-            delete seesawRotary;
-            seesawRotary = nullptr;
-        }
-        aLinuxInputImpl = new LinuxInputImpl();
-        aLinuxInputImpl->init();
-    }
-#endif
-#if !MESHTASTIC_EXCLUDE_INPUTBROKER && HAS_TRACKBALL
-    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-        trackballInterruptImpl1 = new TrackballInterruptImpl1();
-        trackballInterruptImpl1->init(TB_DOWN, TB_UP, TB_LEFT, TB_RIGHT, TB_PRESS);
-    }
-#endif
-#ifdef INPUTBROKER_EXPRESSLRSFIVEWAY_TYPE
-    expressLRSFiveWayInput = new ExpressLRSFiveWay();
-#endif
 #if HAS_SCREEN && !MESHTASTIC_EXCLUDE_CANNEDMESSAGES
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
         cannedMessageModule = new CannedMessageModule();
@@ -304,6 +232,9 @@ void setupModules()
 #if !MESHTASTIC_EXCLUDE_RANGETEST && !MESHTASTIC_EXCLUDE_GPS
     if (moduleConfig.has_range_test && moduleConfig.range_test.enabled)
         new RangeTestModule();
+#endif
+#if defined(HAS_HARDWARE_WATCHDOG)
+    watchdogThread = new WatchdogThread();
 #endif
     // NOTE! This module must be added LAST because it likes to check for replies from other modules and avoid sending extra
     // acks

src/modules/RoutingModule.cpp

@@ -67,6 +67,8 @@ uint8_t RoutingModule::getHopLimitForResponse(const meshtastic_MeshPacket &mp)
 #if !(EVENTMODE)             // This falls through to the default.
             return hopsUsed; // If the request used more hops than the limit, use the same amount of hops
 #endif
+        } else if (mp.hop_start == 0) {
+            return 0; // The requesting node wanted 0 hops, so the response also uses a direct/local path.
         } else if ((uint8_t)(hopsUsed + 2) < config.lora.hop_limit) {
             return hopsUsed + 2; // Use only the amount of hops needed with some margin as the way back may be different
         }

src/modules/SerialModule.cpp

@@ -63,29 +63,26 @@
 SerialModule *serialModule;
 SerialModuleRadio *serialModuleRadio;
 
-#if defined(TTGO_T_ECHO) || defined(TTGO_T_ECHO_PLUS) || defined(CANARYONE) || defined(MESHLINK) ||                              \
-    defined(ELECROW_ThinkNode_M1) || defined(ELECROW_ThinkNode_M4) || defined(ELECROW_ThinkNode_M5) ||                           \
-    defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE) || defined(ELECROW_ThinkNode_M3) || defined(MUZI_BASE)
-
-SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial")
-{
-    api_type = TYPE_SERIAL;
-}
-static Print *serialPrint = &Serial;
-#elif defined(CONFIG_IDF_TARGET_ESP32C6) || defined(RAK3172) || defined(EBYTE_E77_MBL)
-SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("Serial")
-{
-    api_type = TYPE_SERIAL;
-}
-static Print *serialPrint = &Serial1;
-#else
-SerialModule::SerialModule() : StreamAPI(&Serial2), concurrency::OSThread("Serial")
-{
-    api_type = TYPE_SERIAL;
-}
-static Print *serialPrint = &Serial2;
+#ifndef SERIAL_PRINT_PORT
+#define SERIAL_PRINT_PORT 2
 #endif
 
+#if SERIAL_PRINT_PORT == 0
+#define SERIAL_PRINT_OBJECT Serial
+#elif SERIAL_PRINT_PORT == 1
+#define SERIAL_PRINT_OBJECT Serial1
+#elif SERIAL_PRINT_PORT == 2
+#define SERIAL_PRINT_OBJECT Serial2
+#else
+#error "Unsupported SERIAL_PRINT_PORT value. Allowed values are 0, 1, or 2."
+#endif
+
+SerialModule::SerialModule() : StreamAPI(&SERIAL_PRINT_OBJECT), concurrency::OSThread("Serial")
+{
+    api_type = TYPE_SERIAL;
+}
+static Print *serialPrint = &SERIAL_PRINT_OBJECT;
+
 char serialBytes[512];
 size_t serialPayloadSize;
 
@@ -205,9 +202,7 @@ int32_t SerialModule::runOnce()
                 Serial.begin(baud);
                 Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
             }
-#elif !defined(TTGO_T_ECHO) && !defined(TTGO_T_ECHO_PLUS) && !defined(T_ECHO_LITE) && !defined(CANARYONE) &&                     \
-    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M4) &&  \
-    !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
+#elif SERIAL_PRINT_PORT != 0
 
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
 #ifdef ARCH_RP2040
@@ -264,9 +259,7 @@ int32_t SerialModule::runOnce()
                 }
             }
 
-#if !defined(TTGO_T_ECHO) && !defined(TTGO_T_ECHO_PLUS) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) && \
-    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M4) &&                        \
-    !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
+#if SERIAL_PRINT_PORT != 0
             else if ((moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_WS85)) {
                 processWXSerial();
 
@@ -540,11 +533,7 @@ ParsedLine parseLine(const char *line)
  */
 void SerialModule::processWXSerial()
 {
-#if !defined(TTGO_T_ECHO) && !defined(TTGO_T_ECHO_PLUS) && !defined(T_ECHO_LITE) && !defined(CANARYONE) &&                       \
-    !defined(CONFIG_IDF_TARGET_ESP32C6) && !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) &&                               \
-    !defined(ELECROW_ThinkNode_M3) && \ 
-    !defined(ELECROW_ThinkNode_M4) &&                                                                                            \
-    !defined(ELECROW_ThinkNode_M5) && !defined(ARCH_STM32WL) && !defined(MUZI_BASE)
+#if SERIAL_PRINT_PORT != 0 && !defined(ARCH_STM32WL) && !defined(CONFIG_IDF_TARGET_ESP32C6)
 
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -529,37 +529,46 @@ bool EnvironmentTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPac
 
 bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m)
 {
-    bool valid = true;
+    bool valid = false;
     bool hasSensor = false;
+    // getMetrics() doesn't always get evaluated because of
+    // short-circuit evaluation rules in c++
+    bool get_metrics;
     m->time = getTime();
     m->which_variant = meshtastic_Telemetry_environment_metrics_tag;
     m->variant.environment_metrics = meshtastic_EnvironmentMetrics_init_zero;
 
     for (TelemetrySensor *sensor : sensors) {
-        valid = valid && sensor->getMetrics(m);
+        get_metrics = sensor->getMetrics(m); // avoid short-circuit evaluation rules
+        valid = valid || get_metrics;
         hasSensor = true;
     }
 
 #ifndef T1000X_SENSOR_EN
     if (ina219Sensor.hasSensor()) {
-        valid = valid && ina219Sensor.getMetrics(m);
+        get_metrics = ina219Sensor.getMetrics(m);
+        valid = valid || get_metrics;
         hasSensor = true;
     }
     if (ina260Sensor.hasSensor()) {
-        valid = valid && ina260Sensor.getMetrics(m);
+        get_metrics = ina260Sensor.getMetrics(m);
+        valid = valid || get_metrics;
         hasSensor = true;
     }
     if (ina3221Sensor.hasSensor()) {
-        valid = valid && ina3221Sensor.getMetrics(m);
+        get_metrics = ina3221Sensor.getMetrics(m);
+        valid = valid || get_metrics;
         hasSensor = true;
     }
     if (max17048Sensor.hasSensor()) {
-        valid = valid && max17048Sensor.getMetrics(m);
+        get_metrics = max17048Sensor.getMetrics(m);
+        valid = valid || get_metrics;
         hasSensor = true;
     }
 #endif
 #ifdef HAS_RAKPROT
-    valid = valid && rak9154Sensor.getMetrics(m);
+    get_metrics = rak9154Sensor.getMetrics(m);
+    valid = valid || get_metrics;
     hasSensor = true;
 #endif
     return valid && hasSensor;

src/modules/Telemetry/HealthTelemetry.cpp

@@ -168,18 +168,21 @@ bool HealthTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &
 
 bool HealthTelemetryModule::getHealthTelemetry(meshtastic_Telemetry *m)
 {
-    bool valid = true;
+    bool valid = false;
     bool hasSensor = false;
+    bool get_metrics;
     m->time = getTime();
     m->which_variant = meshtastic_Telemetry_health_metrics_tag;
     m->variant.health_metrics = meshtastic_HealthMetrics_init_zero;
 
     if (max30102Sensor.hasSensor()) {
-        valid = valid && max30102Sensor.getMetrics(m);
+        get_metrics = max30102Sensor.getMetrics(m);
+        valid = valid || get_metrics; // avoid short-circuit evaluation rules
         hasSensor = true;
     }
     if (mlx90614Sensor.hasSensor()) {
-        valid = valid && mlx90614Sensor.getMetrics(m);
+        get_metrics = mlx90614Sensor.getMetrics(m);
+        valid = valid || get_metrics;
         hasSensor = true;
     }
 

src/watchdog/watchdogThread.cpp

@@ -0,0 +1,37 @@
+#include "watchdogThread.h"
+#include "configuration.h"
+
+#ifdef HAS_HARDWARE_WATCHDOG
+WatchdogThread *watchdogThread;
+
+WatchdogThread::WatchdogThread() : OSThread("Watchdog")
+{
+    setup();
+}
+
+void WatchdogThread::feedDog(void)
+{   
+    digitalWrite(HARDWARE_WATCHDOG_DONE, HIGH);
+    delay(1);
+    digitalWrite(HARDWARE_WATCHDOG_DONE, LOW);
+}
+
+int32_t WatchdogThread::runOnce()
+{
+    LOG_DEBUG("Feeding hardware watchdog");
+    feedDog();
+    return HARDWARE_WATCHDOG_TIMEOUT_MS;
+}
+
+bool WatchdogThread::setup()
+{
+    LOG_DEBUG("init hardware watchdog");
+    pinMode(HARDWARE_WATCHDOG_WAKE, INPUT);
+    pinMode(HARDWARE_WATCHDOG_DONE, OUTPUT);
+    delay(1);
+    digitalWrite(HARDWARE_WATCHDOG_DONE, LOW);
+    delay(1);
+    feedDog();
+    return true;
+}
+#endif

src/watchdog/watchdogThread.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include <stdint.h>
+#include "concurrency/OSThread.h"
+
+#ifdef HAS_HARDWARE_WATCHDOG
+class WatchdogThread : private concurrency::OSThread
+{
+  public:
+
+    WatchdogThread();
+    void feedDog(void);
+    virtual bool setup();
+    virtual int32_t runOnce() override;
+
+};
+
+extern WatchdogThread *watchdogThread;
+#endif

variants/esp32/chatter2/platformio.ini

@@ -8,8 +8,9 @@ build_flags =
   -I variants/esp32/chatter2
   -DMESHTASTIC_EXCLUDE_WEBSERVER=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -ULED_BUILTIN
   
 lib_deps =
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

variants/esp32/diy/hydra/platformio.ini

@@ -14,3 +14,4 @@ build_flags =
   ${esp32_base.build_flags}
   -D DIY_V1
   -I variants/esp32/diy/hydra
+  -ULED_BUILTIN

variants/esp32/diy/v1/platformio.ini

@@ -17,3 +17,4 @@ build_flags =
   -D DIY_V1
   -D EBYTE_E22
   -I variants/esp32/diy/v1
+  -ULED_BUILTIN

variants/esp32/m5stack_core/platformio.ini

@@ -36,4 +36,4 @@ lib_ignore =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

variants/esp32/nano-g1-explorer/platformio.ini

@@ -14,3 +14,4 @@ build_flags =
   ${esp32_base.build_flags}
   -D NANO_G1_EXPLORER
   -I variants/esp32/nano-g1-explorer
+  -ULED_BUILTIN

variants/esp32/nano-g1/platformio.ini

@@ -14,3 +14,4 @@ build_flags =
   ${esp32_base.build_flags}
   -D NANO_G1
   -I variants/esp32/nano-g1
+  -ULED_BUILTIN

variants/esp32/radiomaster_900_bandit/platformio.ini

@@ -9,6 +9,7 @@ build_flags =
   -DHAS_STK8XXX=1
   -O2
   -I variants/esp32/radiomaster_900_bandit
+  -ULED_BUILTIN
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =

variants/esp32/radiomaster_900_bandit_micro/platformio.ini

@@ -13,5 +13,6 @@ build_flags =
   -DCONFIG_DISABLE_HAL_LOCKS=1
   -O2
   -I variants/esp32/radiomaster_900_bandit_nano
+  -ULED_BUILTIN
 board_build.f_cpu = 240000000L
 upload_protocol = esptool

variants/esp32/radiomaster_900_bandit_nano/platformio.ini

@@ -16,5 +16,6 @@ build_flags =
   -DCONFIG_DISABLE_HAL_LOCKS=1
   -O2
   -I variants/esp32/radiomaster_900_bandit_nano
+  -ULED_BUILTIN
 board_build.f_cpu = 240000000L
 upload_protocol = esptool

variants/esp32/rak11200/pins_arduino.h

@@ -6,8 +6,6 @@
 #define LED_GREEN 12
 #define LED_BLUE 2
 
-#define LED_BUILTIN LED_GREEN
-
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;
 

variants/esp32/rak11200/variant.h

@@ -6,8 +6,6 @@
 #define LED_GREEN 12
 #define LED_BLUE 2
 
-#define LED_BUILTIN LED_GREEN
-
 static const uint8_t TX = 1;
 static const uint8_t RX = 3;
 

variants/esp32/station-g1/platformio.ini

@@ -14,3 +14,4 @@ build_flags =
   ${esp32_base.build_flags}
   -D STATION_G1
   -I variants/esp32/station-g1
+  -ULED_BUILTIN

variants/esp32/tbeam/platformio.ini

@@ -18,6 +18,7 @@ build_flags = ${esp32_base.build_flags}
   -I variants/esp32/tbeam
   -DBOARD_HAS_PSRAM
   -mfix-esp32-psram-cache-issue
+  -ULED_BUILTIN
 upload_speed = 921600
 
 [env:tbeam-displayshield]

variants/esp32/tlora_v2_1_16/platformio.ini

@@ -12,7 +12,7 @@ extends = esp32_base
 board = ttgo-lora32-v21
 board_check = true
 build_flags = 
-  ${esp32_base.build_flags} -D TLORA_V2_1_16 -I variants/esp32/tlora_v2_1_16
+  ${esp32_base.build_flags} -D TLORA_V2_1_16 -I variants/esp32/tlora_v2_1_16 -ULED_BUILTIN
 upload_speed = 115200
 
 [env:sugarcube]

variants/esp32/tlora_v3_3_0_tcxo/platformio.ini

@@ -6,4 +6,5 @@ build_flags =
   -D TLORA_V2_1_16
   -I variants/esp32/tlora_v2_1_16
   -D LORA_TCXO_GPIO=12
-  -D BUTTON_PIN=0
+  -D BUTTON_PIN=0
+  -ULED_BUILTIN

variants/esp32/wiphone/platformio.ini

@@ -11,7 +11,7 @@ build_flags =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
   # renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
   sparkfun/SX1509 IO Expander@3.0.6
   # renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102

variants/esp32c6/m5stack_unitc6l/variant.h

@@ -50,3 +50,5 @@ void c6l_init();
 #endif
 #define SCREEN_TRANSITION_FRAMERATE 10
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+
+#define SERIAL_PRINT_PORT 1

variants/esp32c6/tlora_c6/platformio.ini

@@ -8,3 +8,4 @@ build_flags =
   -I variants/esp32c6/tlora_c6
   -DARDUINO_USB_CDC_ON_BOOT=1
   -DARDUINO_USB_MODE=1
+  -ULED_BUILTIN

variants/esp32c6/tlora_c6/variant.h

@@ -19,3 +19,5 @@
 #define SX126X_TXEN 14
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define SERIAL_PRINT_PORT 1

variants/esp32s3/ELECROW-ThinkNode-M5/variant.h

@@ -81,4 +81,6 @@
 
 #define BUTTON_PIN PIN_BUTTON1
 #define BUTTON_PIN_ALT PIN_BUTTON2
+
+#define SERIAL_PRINT_PORT 0
 #endif

variants/esp32s3/heltec_capsule_sensor_v3/platformio.ini

@@ -6,4 +6,5 @@ board_build.partitions = default_8MB.csv
 build_flags = 
   ${esp32s3_base.build_flags} -I variants/esp32s3/heltec_capsule_sensor_v3
   -D HELTEC_CAPSULE_SENSOR_V3
+  -ULED_BUILTIN
   ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output

variants/esp32s3/heltec_sensor_hub/platformio.ini

@@ -7,6 +7,7 @@ build_flags =
   ${esp32s3_base.build_flags}
   -I variants/esp32s3/heltec_sensor_hub
   -D HELTEC_SENSOR_HUB
+  -ULED_BUILTIN
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel

variants/esp32s3/heltec_v3/platformio.ini

@@ -18,3 +18,4 @@ build_flags =
   ${esp32s3_base.build_flags}
   -D HELTEC_V3
   -I variants/esp32s3/heltec_v3
+  -ULED_BUILTIN

variants/esp32s3/heltec_v4/pins_arduino.h

@@ -6,10 +6,6 @@
 #define USB_VID 0x303a
 #define USB_PID 0x1001
 
-static const uint8_t LED_BUILTIN = 35;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/heltec_v4/platformio.ini

@@ -126,7 +126,7 @@ build_flags =
 lib_deps = ${heltec_v4_base.lib_deps}
   ; ${device-ui_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.0
+  lovyan03/LovyanGFX@1.2.19
   # renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
   https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
   ; TODO revert to official device-ui (when merged)

variants/esp32s3/heltec_vision_master_e213/pins_arduino.h

@@ -3,10 +3,6 @@
 
 #include <stdint.h>
 
-static const uint8_t LED_BUILTIN = 45; // LED is not populated on earliest board variant
-#define BUILTIN_LED LED_BUILTIN        // Backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/heltec_vision_master_e290/pins_arduino.h

@@ -3,10 +3,6 @@
 
 #include <stdint.h>
 
-static const uint8_t LED_BUILTIN = 45; // LED is not populated on earliest board variant
-#define BUILTIN_LED LED_BUILTIN        // Backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/heltec_vision_master_t190/pins_arduino.h

@@ -3,10 +3,6 @@
 
 #include <stdint.h>
 
-static const uint8_t LED_BUILTIN = 35;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/heltec_wireless_paper/pins_arduino.h

@@ -3,10 +3,6 @@
 
 #include <stdint.h>
 
-static const uint8_t LED_BUILTIN = 18;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/heltec_wireless_paper_v1/pins_arduino.h

@@ -3,10 +3,6 @@
 
 #include <stdint.h>
 
-static const uint8_t LED_BUILTIN = 18;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t KEY_BUILTIN = 0;
 
 static const uint8_t TX = 43;

variants/esp32s3/heltec_wireless_tracker/pins_arduino.h

@@ -11,10 +11,6 @@
 #define USB_VID 0x303a
 #define USB_PID 0x1001
 
-static const uint8_t LED_BUILTIN = 18;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/heltec_wireless_tracker/platformio.ini

@@ -24,4 +24,4 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

variants/esp32s3/heltec_wireless_tracker_V1_0/pins_arduino.h

@@ -11,10 +11,6 @@
 #define USB_VID 0x303a
 #define USB_PID 0x1001
 
-static const uint8_t LED_BUILTIN = 18;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini

@@ -22,4 +22,4 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

variants/esp32s3/heltec_wireless_tracker_v2/pins_arduino.h

@@ -10,10 +10,6 @@
 #define USB_VID 0x303a
 #define USB_PID 0x1001
 
-static const uint8_t LED_BUILTIN = 18;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini

@@ -20,4 +20,4 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

variants/esp32s3/heltec_wsl_v3/platformio.ini

@@ -17,3 +17,4 @@ build_flags =
   ${esp32s3_base.build_flags}
   -D HELTEC_WSL_V3
   -I variants/esp32s3/heltec_wsl_v3
+  -ULED_BUILTIN

variants/esp32s3/m5stack_cores3/pins_arduino.h

@@ -10,10 +10,7 @@
 // Some boards have too low voltage on this pin (board design bug)
 // Use different pin with 3V and connect with 48
 // and change this setup for the chosen pin (for example 38)
-static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + 48;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-#define RGB_BUILTIN LED_BUILTIN
+#define RGB_BUILTIN SOC_GPIO_PIN_COUNT + 48
 #define RGB_BRIGHTNESS 64
 
 static const uint8_t TX = 43;

variants/esp32s3/mesh-tab/pins_arduino.h

@@ -49,10 +49,6 @@ static const uint8_t T14 = 14;
 static const uint8_t VBAT_SENSE = 2;
 static const uint8_t VBUS_SENSE = 34;
 
-// User LED
-#define LED_BUILTIN 13
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-
 static const uint8_t RGB_DATA = 40;
 // RGB_BUILTIN and RGB_BRIGHTNESS can be used in new Arduino API neopixelWrite()
 #define RGB_BUILTIN (RGB_DATA + SOC_GPIO_PIN_COUNT)

variants/esp32s3/mesh-tab/platformio.ini

@@ -51,7 +51,7 @@ lib_deps =
   ${esp32s3_base.lib_deps}
   ${device-ui_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
 
 [mesh_tab_xpt2046]
 extends = mesh_tab_base

variants/esp32s3/picomputer-s3/platformio.ini

@@ -24,7 +24,7 @@ build_flags =
 lib_deps = 
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
 
 build_src_filter =
   ${esp32s3_base.build_src_filter}

variants/esp32s3/rak3312/pins_arduino.h

@@ -24,9 +24,6 @@ static const uint8_t SCK = 13;
 #define SPI_MISO (10)
 #define SPI_CS (12)
 
-// LEDs
-#define LED_BUILTIN LED_GREEN
-
 #ifdef _VARIANT_RAK3112_
 /*
  * Serial interfaces

variants/esp32s3/rak_wismesh_tap_v2/pins_arduino.h

@@ -22,7 +22,4 @@ static const uint8_t SCK = 13;
 #define SPI_MISO (10)
 #define SPI_CS (12)
 
-// LEDs
-#define LED_BUILTIN LED_GREEN
-
 #endif /* Pins_Arduino_h */

variants/esp32s3/rak_wismesh_tap_v2/platformio.ini

@@ -16,7 +16,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
 
 [ft5x06]
 extends = mesh_tab_base

variants/esp32s3/seeed-sensecap-indicator/pins_arduino.h

@@ -3,8 +3,6 @@
 
 #include <stdint.h>
 
-// static const uint8_t LED_BUILTIN = -1;
-
 // static const uint8_t TX = 43;
 // static const uint8_t RX = 44;
 

variants/esp32s3/t-deck/pins_arduino.h

@@ -6,8 +6,6 @@
 #define USB_VID 0x303a
 #define USB_PID 0x1001
 
-// static const uint8_t LED_BUILTIN = -1;
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/t-deck/platformio.ini

@@ -28,7 +28,7 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
   # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
   earlephilhower/ESP8266Audio@1.9.9
   # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM

variants/esp32s3/t-watch-s3/pins_arduino.h

@@ -3,8 +3,6 @@
 
 #include <stdint.h>
 
-// static const uint8_t LED_BUILTIN = -1;
-
 // static const uint8_t TX = 43;
 // static const uint8_t RX = 44;
 

variants/esp32s3/t-watch-s3/platformio.ini

@@ -22,7 +22,7 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.4
   # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library

variants/esp32s3/tlora-pager/platformio.ini

@@ -33,7 +33,7 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
   # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
   earlephilhower/ESP8266Audio@1.9.9
   # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM

variants/esp32s3/tracksenger/internal/pins_arduino.h

@@ -11,10 +11,6 @@
 #define USB_VID 0x303a
 #define USB_PID 0x1001
 
-static const uint8_t LED_BUILTIN = 18;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/tracksenger/lcd/pins_arduino.h

@@ -11,10 +11,6 @@
 #define USB_VID 0x303a
 #define USB_PID 0x1001
 
-static const uint8_t LED_BUILTIN = 18;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/tracksenger/oled/pins_arduino.h

@@ -11,10 +11,6 @@
 #define USB_VID 0x303a
 #define USB_PID 0x1001
 
-static const uint8_t LED_BUILTIN = 18;
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-#define LED_BUILTIN LED_BUILTIN
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/tracksenger/platformio.ini

@@ -22,7 +22,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
 
 [env:tracksenger-lcd]
 custom_meshtastic_hw_model = 48
@@ -48,7 +48,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
 
 [env:tracksenger-oled]
 custom_meshtastic_hw_model = 48

variants/esp32s3/unphone/pins_arduino.h

@@ -6,9 +6,6 @@
 #define USB_VID 0x16D0
 #define USB_PID 0x1178
 
-#define LED_BUILTIN 13
-#define BUILTIN_LED LED_BUILTIN // backward compatibility
-
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
 

variants/esp32s3/unphone/platformio.ini

@@ -37,7 +37,7 @@ build_src_filter =
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.0
+  lovyan03/LovyanGFX@1.2.19
   # TODO renovate
   https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
   # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel

variants/native/portduino.ini

@@ -27,7 +27,7 @@ lib_deps =
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
   # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
   https://github.com/pine64/libch341-spi-userspace/archive/23c42319a69cffcb65868e3c72e6bed83974a393.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library

variants/nrf52840/Dongle_nRF52840-pca10059-v1/variant.h

@@ -50,7 +50,6 @@ extern "C" {
 #define RGBLED_BLUE (0 + 12)  // Blue of RGB   P0.12
 #define RGBLED_CA             // comment out this line if you have a common cathode type, as defined use common anode logic
 
-#define LED_BUILTIN PIN_LED1
 #define LED_CONN PIN_LED2
 
 #define LED_GREEN PIN_LED1

variants/nrf52840/ELECROW-ThinkNode-M1/variant.h

@@ -55,7 +55,6 @@ extern "C" {
 #define LED_RED PIN_LED3
 #define LED_BLUE PIN_LED1
 #define LED_GREEN PIN_LED2
-#define LED_BUILTIN LED_BLUE
 #define LED_CONN PIN_GREEN
 #define LED_STATE_ON 0 // State when LED is lit  // LED灯亮时的状态
 #define PIN_BUZZER (0 + 6)
@@ -159,6 +158,8 @@ External serial flash WP25R1635FZUIL0
 #define PIN_SERIAL1_TX GPS_TX_PIN
 #define PIN_SERIAL1_RX GPS_RX_PIN
 
+#define SERIAL_PRINT_PORT 0
+
 /*
  * SPI Interfaces
  */

variants/nrf52840/ELECROW-ThinkNode-M3/variant.h

@@ -58,7 +58,6 @@ extern "C" {
 #define LED_BLUE 37
 #define LED_PAIRING LED_BLUE // Signals the Status LED Module to handle this LED
 
-#define LED_BUILTIN -1
 #define LED_STATE_ON LOW
 #define LED_STATE_OFF HIGH
 
@@ -113,6 +112,8 @@ extern "C" {
 #define LR11X0_DIO3_TCXO_VOLTAGE 3.3
 #define LR11X0_DIO_AS_RF_SWITCH
 
+#define SERIAL_PRINT_PORT 0
+
 // PCF8563 RTC Module
 // REVISIT https://github.com/meshtastic/firmware/pull/9084
 // #define PCF8563_RTC 0x51

variants/nrf52840/ELECROW-ThinkNode-M4/variant.h

@@ -40,7 +40,6 @@ extern "C" {
 #define NUM_ANALOG_OUTPUTS (0)
 
 // LEDs
-#define LED_BUILTIN -1
 #define LED_BLUE -1
 #define PIN_LED2 (32 + 9)
 #define LED_PAIRING (13)
@@ -135,6 +134,8 @@ static const uint8_t A0 = PIN_A0;
 #define PIN_SERIAL1_RX GPS_RX_PIN
 #define PIN_SERIAL1_TX GPS_TX_PIN
 
+#define SERIAL_PRINT_PORT 0
+
 #ifdef __cplusplus
 }
 #endif

variants/nrf52840/ELECROW-ThinkNode-M6/variant.h

@@ -40,7 +40,6 @@ extern "C" {
 #define NUM_ANALOG_OUTPUTS (0)
 
 // LEDs
-#define LED_BUILTIN -1
 #define LED_BLUE -1
 #define LED_CHARGE (12)
 #define LED_PAIRING (7)

variants/nrf52840/ME25LS01-4Y10TD/variant.h

@@ -51,7 +51,6 @@ extern "C" {
 #define PIN_LED1 (32 + 7) // P1.07 Blue D2
 
 #define LED_PIN PIN_LED1
-#define LED_BUILTIN -1
 
 #define LED_BLUE -1
 #define LED_STATE_ON 1 // State when LED is lit

variants/nrf52840/ME25LS01-4Y10TD_e-ink/variant.h

@@ -51,7 +51,6 @@ extern "C" {
 #define PIN_LED1 (32 + 7) // P1.07 Blue D2
 
 #define LED_PIN PIN_LED1
-#define LED_BUILTIN -1
 
 #define LED_BLUE -1
 #define LED_STATE_ON 1 // State when LED is lit

variants/nrf52840/MS24SF1/variant.h

@@ -51,7 +51,6 @@ extern "C" {
 #define PIN_LED1 (-1)
 
 #define LED_PIN PIN_LED1
-#define LED_BUILTIN -1
 
 #define LED_BLUE -1
 #define LED_STATE_ON 1 // State when LED is lit

variants/nrf52840/MakePython_nRF52840_eink/variant.h

@@ -29,7 +29,6 @@ extern "C" {
 #define PIN_LED1 (32 + 10) // LED        P1.15
 #define PIN_LED2 (-1)      //
 
-#define LED_BUILTIN PIN_LED1
 #define LED_CONN PIN_LED2
 
 #define LED_GREEN PIN_LED1

variants/nrf52840/MakePython_nRF52840_oled/variant.h

@@ -29,7 +29,6 @@ extern "C" {
 #define PIN_LED1 (32 + 10) // LED        P1.15
 #define PIN_LED2 (-1)      //
 
-#define LED_BUILTIN PIN_LED1
 #define LED_CONN PIN_LED2
 
 #define LED_GREEN PIN_LED1

variants/nrf52840/TWC_mesh_v4/variant.h

@@ -34,7 +34,6 @@ extern "C" {
 // #define PIN_LED1 (32 + 9) Green
 // #define PIN_LED1 (0 + 12) Blue
 
-#define LED_BUILTIN PIN_LED1
 #define LED_CONN PIN_LED2
 
 #define LED_GREEN PIN_LED1

variants/nrf52840/canaryone/variant.h

@@ -52,7 +52,6 @@ extern "C" {
 
 #define LED_BLUE PIN_LED1
 
-#define LED_BUILTIN PIN_LED1
 #define LED_CONN PIN_LED3
 
 #define LED_STATE_ON 0 // State when LED is lit
@@ -170,6 +169,8 @@ static const uint8_t A0 = PIN_A0;
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER (2.0F)
 
+#define SERIAL_PRINT_PORT 0
+
 #ifdef __cplusplus
 }
 #endif

variants/nrf52840/diy/nrf52_promicro_diy_tcxo/variant.h

@@ -81,7 +81,6 @@ NRF52 PRO MICRO PIN ASSIGNMENT
 
 // LED
 #define PIN_LED1 (0 + 15) // P0.15
-#define LED_BUILTIN PIN_LED1
 // Actually red
 #define LED_BLUE PIN_LED1
 #define LED_STATE_ON 1 // State when LED is lit

variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/variant.h

@@ -38,7 +38,6 @@ extern "C" {
 #define PIN_LED PIN_LED1
 #define LED_PWR (PINS_COUNT)
 
-#define LED_BUILTIN PIN_LED
 #define LED_STATE_ON 1 // State when LED is lit
 
 // XIAO Wio-SX1262 Shield User button

variants/nrf52840/dls_Minimesh_Lite/variant.h

@@ -44,7 +44,6 @@ extern "C" {
 
 // LED
 #define PIN_LED1 (0 + 15)
-#define LED_BUILTIN PIN_LED1
 // Actually red
 #define LED_BLUE PIN_LED1
 #define LED_STATE_ON 1

variants/nrf52840/feather_diy/variant.h

@@ -49,8 +49,6 @@ extern "C" {
 #define PIN_LED1 (32 + 15) // P1.15 3
 #define PIN_LED2 (32 + 10) // P1.10 4
 
-#define LED_BUILTIN PIN_LED1
-
 #define LED_GREEN PIN_LED2 // Actually red
 #define LED_BLUE PIN_LED1
 

variants/nrf52840/gat562_mesh_trial_tracker/variant.h

@@ -48,7 +48,6 @@ extern "C" {
 #define PIN_LED1 (35)
 #define PIN_LED2 (36)
 
-#define LED_BUILTIN PIN_LED1
 #define LED_CONN PIN_LED2
 
 #define LED_GREEN PIN_LED1

variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h

@@ -30,7 +30,6 @@ extern "C" {
 #define PIN_LED1 (32 + 3) // green (confirmed on 1.0 board)
 #define LED_BLUE PIN_LED1 // fake for bluefruit library
 #define LED_GREEN PIN_LED1
-#define LED_BUILTIN LED_GREEN
 #define LED_STATE_ON 0 // State when LED is lit
 
 #define HAS_NEOPIXEL                         // Enable the use of neopixels

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -74,7 +74,6 @@ extern "C" {
 #define PIN_LED1 (32 + 3) // green (confirmed on 1.0 board)
 #define LED_BLUE PIN_LED1 // fake for bluefruit library
 #define LED_GREEN PIN_LED1
-#define LED_BUILTIN LED_GREEN
 #define LED_STATE_ON 0 // State when LED is lit
 
 #define HAS_NEOPIXEL                         // Enable the use of neopixels

variants/nrf52840/heltec_mesh_pocket/variant.h

@@ -26,7 +26,6 @@ extern "C" {
 #define LED_RED PIN_LED1
 #define LED_BLUE PIN_LED1
 #define LED_GREEN PIN_LED1
-#define LED_BUILTIN LED_BLUE
 #define LED_CONN LED_BLUE
 #define LED_STATE_ON 0 // State when LED is lit
 

variants/nrf52840/heltec_mesh_solar/variant.h

@@ -39,16 +39,15 @@ extern "C" {
 #define NUM_ANALOG_INPUTS (1)
 #define NUM_ANALOG_OUTPUTS (0)
 
-#define PIN_LED1 (0 + 4)  // green (confirmed on 1.0 board)
+#define PIN_LED1 (32 + 15)  // green (confirmed on 1.0 board)
 #define LED_BLUE PIN_LED1 // fake for bluefruit library
 #define LED_GREEN PIN_LED1
-#define LED_BUILTIN LED_GREEN
 #define LED_STATE_ON 0 // State when LED is lit
 
-#define HAS_NEOPIXEL                         // Enable the use of neopixels
-#define NEOPIXEL_COUNT 1                     // How many neopixels are connected
-#define NEOPIXEL_DATA (32 + 15)              // gpio pin used to send data to the neopixels
-#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+// #define HAS_NEOPIXEL                         // Enable the use of neopixels
+// #define NEOPIXEL_COUNT 1                     // How many neopixels are connected
+// #define NEOPIXEL_DATA (32 + 15)              // gpio pin used to send data to the neopixels
+// #define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
 
 /*
  * Buttons
@@ -60,8 +59,8 @@ extern "C" {
 /*
 No longer populated on PCB
 */
-#define PIN_SERIAL2_RX (0 + 9)
-#define PIN_SERIAL2_TX (0 + 10)
+#define PIN_SERIAL2_RX (-1)
+#define PIN_SERIAL2_TX (-1)
 
 /*
  * I2C
@@ -138,10 +137,18 @@ No longer populated on PCB
 // To debug via the segger JLINK console rather than the CDC-ACM serial device
 // #define USE_SEGGER
 
+// Hardware watchdog
+#define HAS_HARDWARE_WATCHDOG
+#define HARDWARE_WATCHDOG_DONE (0 + 9)
+#define HARDWARE_WATCHDOG_WAKE (0 + 10)
+#define HARDWARE_WATCHDOG_TIMEOUT_MS (6*60*1000) // 6 minute watchdog
+
 #define BQ4050_SDA_PIN (32 + 1)                // I2C data line pin
 #define BQ4050_SCL_PIN (32 + 0)                // I2C clock line pin
 #define BQ4050_EMERGENCY_SHUTDOWN_PIN (32 + 3) // Emergency shutdown pin
 
+#define SERIAL_PRINT_PORT 0
+
 #ifdef __cplusplus
 }
 #endif

variants/nrf52840/meshlink/variant.h

@@ -31,7 +31,6 @@ extern "C" {
 // LEDs
 #define PIN_LED1 (24) // Built in white led for status
 #define LED_BLUE PIN_LED1
-#define LED_BUILTIN PIN_LED1
 
 #define LED_STATE_ON 0 // State when LED is litted
 #define LED_INVERTED 1
@@ -54,6 +53,7 @@ extern "C" {
  */
 #define PIN_SERIAL1_RX (32 + 8)
 #define PIN_SERIAL1_TX (7)
+#define SERIAL_PRINT_PORT 0
 
 /*
  * SPI Interfaces

variants/nrf52840/meshtiny/variant.h

@@ -49,7 +49,6 @@ extern "C" {
 #define PIN_LED1 (35)
 #define PIN_LED2 (36)
 
-#define LED_BUILTIN PIN_LED1
 #define LED_CONN PIN_LED2
 
 #define LED_GREEN PIN_LED1

variants/nrf52840/monteops_hw1/variant.h

@@ -52,7 +52,6 @@ extern "C" {
 #define PIN_LED1 (35)
 #define PIN_LED2 (36) // Connected to WWAN host LED (if present)
 
-#define LED_BUILTIN PIN_LED1
 #define LED_CONN PIN_LED2
 
 #define LED_GREEN PIN_LED1

variants/nrf52840/muzi_base/variant.h

@@ -45,7 +45,6 @@ extern "C" {
 #define PIN_LED1 (32 + 3) // P1.03, Green
 #define PIN_LED2 (32 + 4) // P1.04, Blue
 
-#define LED_BUILTIN -1 // PIN_LED1
 #define LED_BLUE PIN_LED2
 #define LED_STATE_ON 0 // State when LED is lit
 
@@ -176,6 +175,8 @@ extern "C" {
 #define EXTERNAL_FLASH_DEVICES W25Q32JVSS
 #define EXTERNAL_FLASH_USE_QSPI
 
+#define SERIAL_PRINT_PORT 0
+
 // NFC is disabled via CONFIG_NFCT_PINS_AS_GPIOS=1 build flag
 // This configures P0.09 and P0.10 as regular GPIO pins instead of NFC pins
 

variants/nrf52840/nano-g2-ultra/variant.h

@@ -50,7 +50,6 @@ extern "C" {
 #define LED_BLUE PIN_LED1
 #define LED_GREEN PIN_LED2
 
-#define LED_BUILTIN LED_BLUE
 #define LED_CONN PIN_GREEN
 
 #define LED_STATE_ON 0 // State when LED is lit

variants/nrf52840/r1-neo/variant.h

@@ -47,7 +47,6 @@ extern "C" {
 #define PIN_LED1 (32 + 4) // P1.04 Controls Green LED
 #define PIN_LED2 (28)     // P0.28 Controls Blue LED
 
-#define LED_BUILTIN PIN_LED1
 #define LED_CONN PIN_LED2
 
 #define LED_GREEN PIN_LED1