mirror of
https://github.com/meshtastic/firmware.git
synced 2025-12-29 22:20:37 +00:00
PlatformIO: Re-Org ESP32 family shared props (#9060)
This commit is contained in:
Austin
GitHub
@@ -273,7 +273,7 @@ _(Example shows only config required by InkHUD. This is not a complete `env` def
|
||||
extends = esp32s3_base, inkhud ; or nrf52840_base, etc
|
||||
|
||||
build_src_filter =
|
||||
${esp32_base.build_src_filter}
|
||||
${esp32s3_base.build_src_filter}
|
||||
${inkhud.build_src_filter}
|
||||
|
||||
build_flags =
|
||||
@@ -756,12 +756,12 @@ This mapping of emoji to control characters is fairly arbitrary. Selection was i
|
||||
| `0x03` | 🙂 |
|
||||
| `0x04` | 😆 |
|
||||
| `0x05` | 👋 |
|
||||
| `0x06` | ☀ |
|
||||
| `0x06` | ☀ |
|
||||
| ~~`0x07`~~ | (bell char, unused) |
|
||||
| `0x08` | 🌧 |
|
||||
| `0x09` | ☁ |
|
||||
| `0x09` | ☁ |
|
||||
| ~~`0x0A`~~ | (line feed, unused) |
|
||||
| `0x0B` | ♥ |
|
||||
| `0x0B` | ♥ |
|
||||
| `0x0C` | 💩 |
|
||||
| ~~`0x0D`~~ | (carriage return, unused) |
|
||||
| `0x0E` | 🔔 |
|
||||
|
||||
88
variants/esp32/esp32-common.ini
Normal file
88
variants/esp32/esp32-common.ini
Normal file
@@ -0,0 +1,88 @@
|
||||
; Common settings for ESP targets, mixin with extends = esp32_common
|
||||
[esp32_common]
|
||||
extends = arduino_base
|
||||
custom_esp32_kind =
|
||||
custom_mtjson_part =
|
||||
platform =
|
||||
# renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
|
||||
platformio/espressif32@6.12.0
|
||||
|
||||
extra_scripts =
|
||||
${env.extra_scripts}
|
||||
pre:extra_scripts/esp32_pre.py
|
||||
extra_scripts/esp32_extra.py
|
||||
|
||||
build_src_filter =
|
||||
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
|
||||
|
||||
upload_speed = 921600
|
||||
debug_init_break = tbreak setup
|
||||
monitor_filters = esp32_exception_decoder
|
||||
|
||||
board_build.filesystem = littlefs
|
||||
|
||||
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
|
||||
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
|
||||
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
|
||||
build_unflags = -fno-lto
|
||||
build_flags =
|
||||
${arduino_base.build_flags}
|
||||
-flto
|
||||
-Wall
|
||||
-Wextra
|
||||
-Isrc/platform/esp32
|
||||
-std=c++11
|
||||
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
|
||||
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
|
||||
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
|
||||
-DAXP_DEBUG_PORT=Serial
|
||||
-DCONFIG_BT_NIMBLE_ENABLED
|
||||
-DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
|
||||
-DCONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
|
||||
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
|
||||
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
|
||||
-DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
|
||||
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
|
||||
-DSERIAL_BUFFER_SIZE=4096
|
||||
-DSERIAL_HAS_ON_RECEIVE
|
||||
-DLIBPAX_ARDUINO
|
||||
-DLIBPAX_WIFI
|
||||
-DLIBPAX_BLE
|
||||
-DHAS_UDP_MULTICAST=1
|
||||
;-DDEBUG_HEAP
|
||||
|
||||
lib_deps =
|
||||
${arduino_base.lib_deps}
|
||||
${networking_base.lib_deps}
|
||||
${networking_extra.lib_deps}
|
||||
${environmental_base.lib_deps}
|
||||
${environmental_extra.lib_deps}
|
||||
${radiolib_base.lib_deps}
|
||||
# renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
|
||||
https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
|
||||
# renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
|
||||
h2zero/NimBLE-Arduino@2.3.7
|
||||
# renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
|
||||
https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
|
||||
# renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
|
||||
lewisxhe/XPowersLib@0.3.2
|
||||
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
|
||||
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
|
||||
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
|
||||
rweather/Crypto@0.4.0
|
||||
|
||||
lib_ignore =
|
||||
segger_rtt
|
||||
ESP32 BLE Arduino
|
||||
|
||||
; leave this commented out to avoid breaking Windows
|
||||
;upload_port = /dev/ttyUSB0
|
||||
;monitor_port = /dev/ttyUSB0
|
||||
|
||||
; Please don't delete these lines. JM uses them.
|
||||
;upload_port = /dev/cu.SLAB_USBtoUART
|
||||
;monitor_port = /dev/cu.SLAB_USBtoUART
|
||||
|
||||
; customize the partition table
|
||||
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
|
||||
board_build.partitions = partition-table.csv
|
||||
@@ -1,88 +1,8 @@
|
||||
; Common settings for ESP targes, mixin with extends = esp32_base
|
||||
; Common settings for ESP32 OG (without suffix)
|
||||
; See 'esp32_common' for common ESP32-family settings
|
||||
[esp32_base]
|
||||
extends = arduino_base
|
||||
extends = esp32_common
|
||||
custom_esp32_kind = esp32
|
||||
custom_mtjson_part =
|
||||
platform =
|
||||
# renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
|
||||
platformio/espressif32@6.12.0
|
||||
|
||||
extra_scripts =
|
||||
${env.extra_scripts}
|
||||
pre:extra_scripts/esp32_pre.py
|
||||
extra_scripts/esp32_extra.py
|
||||
|
||||
build_src_filter =
|
||||
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
|
||||
|
||||
upload_speed = 921600
|
||||
debug_init_break = tbreak setup
|
||||
monitor_filters = esp32_exception_decoder
|
||||
|
||||
board_build.filesystem = littlefs
|
||||
|
||||
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
|
||||
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
|
||||
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
|
||||
build_unflags = -fno-lto
|
||||
build_flags =
|
||||
${arduino_base.build_flags}
|
||||
-flto
|
||||
-Wall
|
||||
-Wextra
|
||||
-Isrc/platform/esp32
|
||||
-std=c++11
|
||||
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
|
||||
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
|
||||
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
|
||||
-DAXP_DEBUG_PORT=Serial
|
||||
-DCONFIG_BT_NIMBLE_ENABLED
|
||||
-DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
|
||||
-DCONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
|
||||
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
|
||||
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
|
||||
-DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
|
||||
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
|
||||
-DSERIAL_BUFFER_SIZE=4096
|
||||
-DSERIAL_HAS_ON_RECEIVE
|
||||
-DLIBPAX_ARDUINO
|
||||
-DLIBPAX_WIFI
|
||||
-DLIBPAX_BLE
|
||||
-DHAS_UDP_MULTICAST=1
|
||||
;-DDEBUG_HEAP
|
||||
|
||||
lib_deps =
|
||||
${arduino_base.lib_deps}
|
||||
${networking_base.lib_deps}
|
||||
${networking_extra.lib_deps}
|
||||
${environmental_base.lib_deps}
|
||||
${environmental_extra.lib_deps}
|
||||
${radiolib_base.lib_deps}
|
||||
# renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
|
||||
https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
|
||||
# renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
|
||||
h2zero/NimBLE-Arduino@^2.3.7
|
||||
# renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
|
||||
https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
|
||||
# renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
|
||||
lewisxhe/XPowersLib@0.3.2
|
||||
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
|
||||
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
|
||||
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
|
||||
rweather/Crypto@0.4.0
|
||||
|
||||
lib_ignore =
|
||||
segger_rtt
|
||||
ESP32 BLE Arduino
|
||||
|
||||
; leave this commented out to avoid breaking Windows
|
||||
;upload_port = /dev/ttyUSB0
|
||||
;monitor_port = /dev/ttyUSB0
|
||||
|
||||
; Please don't delete these lines. JM uses them.
|
||||
;upload_port = /dev/cu.SLAB_USBtoUART
|
||||
;monitor_port = /dev/cu.SLAB_USBtoUART
|
||||
|
||||
; customize the partition table
|
||||
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
|
||||
board_build.partitions = partition-table.csv
|
||||
${esp32_common.build_flags}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
[esp32c3_base]
|
||||
extends = esp32_base
|
||||
extends = esp32_common
|
||||
custom_esp32_kind = esp32c3
|
||||
|
||||
monitor_speed = 115200
|
||||
monitor_filters = esp32_c3_exception_decoder
|
||||
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-DCONFIG_BT_NIMBLE_EXT_ADV=1
|
||||
-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
|
||||
${esp32_common.build_flags}
|
||||
-DCONFIG_BT_NIMBLE_EXT_ADV=1
|
||||
-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
[esp32c6_base]
|
||||
extends = esp32_base
|
||||
extends = esp32_common
|
||||
platform =
|
||||
# Do not renovate until we have switched to pioarduino tagged builds
|
||||
https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
|
||||
@@ -35,12 +35,13 @@ lib_deps =
|
||||
rweather/Crypto@0.4.0
|
||||
|
||||
build_src_filter =
|
||||
${esp32_base.build_src_filter} -<mesh/http>
|
||||
${esp32_common.build_src_filter} -<mesh/http>
|
||||
|
||||
monitor_speed = 460800
|
||||
monitor_filters = esp32_c3_exception_decoder
|
||||
|
||||
lib_ignore =
|
||||
${esp32_common.lib_ignore}
|
||||
NonBlockingRTTTL
|
||||
NimBLE-Arduino
|
||||
libpax
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
[esp32s2_base]
|
||||
extends = esp32_base
|
||||
extends = esp32_common
|
||||
custom_esp32_kind = esp32s2
|
||||
|
||||
build_src_filter =
|
||||
${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
|
||||
${esp32_common.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
|
||||
|
||||
monitor_speed = 115200
|
||||
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
${esp32_common.build_flags}
|
||||
-DHAS_BLUETOOTH=0
|
||||
-DMESHTASTIC_EXCLUDE_PAXCOUNTER
|
||||
-DMESHTASTIC_EXCLUDE_BLUETOOTH
|
||||
|
||||
lib_ignore =
|
||||
${esp32_base.lib_ignore}
|
||||
${esp32_common.lib_ignore}
|
||||
NimBLE-Arduino
|
||||
libpax
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
[esp32s3_base]
|
||||
extends = esp32_base
|
||||
extends = esp32_common
|
||||
custom_esp32_kind = esp32s3
|
||||
|
||||
monitor_speed = 115200
|
||||
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-DCONFIG_BT_NIMBLE_EXT_ADV=1
|
||||
-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
|
||||
${esp32_common.build_flags}
|
||||
-DCONFIG_BT_NIMBLE_EXT_ADV=1
|
||||
-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
|
||||
|
||||
Reference in New Issue
Block a user