ThinkNode G3, ETH support WIP

* Swap the GPS serial port pins.

* Trunk fixes

---------

Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.devcontainer/Dockerfile

@@ -1,7 +1,7 @@
 # trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
-FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
+FROM mcr.microsoft.com/devcontainers/cpp:2-debian-13
 
 USER root
 

.devcontainer/devcontainer.json

@@ -8,7 +8,7 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "latest"
+      "version": "3.14"
     }
   },
   "customizations": {

.github/actions/build-variant/action.yml

@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v5
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v5
+      uses: actions/checkout@v6
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd
@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -19,8 +19,10 @@ jobs:
   pio-build:
     name: build-${{ inputs.platform }}
     runs-on: ubuntu-24.04
+    outputs:
+      artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -54,7 +56,8 @@ jobs:
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
+        id: upload
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
           overwrite: true

.github/workflows/build_one_arch.yml

@@ -1,500 +0,0 @@
-name: Build One Arch
-
-on:
-  workflow_dispatch:
-    inputs:
-      arch:
-        type: choice
-        options:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - native
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{inputs.arch}} extra)
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{inputs.arch}} pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{inputs.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
-    outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  build-esp32:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32s3'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32c3'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32c6'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'nrf52840'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'rp2040'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'rp2350'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'stm32' }}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
-
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v5
-        with:
-          path: ./
-          pattern: firmware-${{inputs.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/build_one_target.yml

@@ -3,6 +3,7 @@ name: Build One Target
 on:
   workflow_dispatch:
     inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
       arch:
         type: choice
         options:
@@ -14,16 +15,17 @@ on:
           - rp2040
           - rp2350
           - stm32
-          - native
       target:
         type: string
         required: false
         description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
-
       # find-target:
       #   type: boolean
       #   default: true
       #   description: 'Find the available targets'
+
+permissions: read-all
+
 jobs:
   find-targets:
     if: ${{ inputs.target == '' }}
@@ -39,10 +41,9 @@ jobs:
           - rp2040
           - rp2350
           - stm32
-
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -51,19 +52,19 @@ jobs:
       - name: Generate matrix
         id: jsonStep
         run: |
-          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} extra)
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
           echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
           echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
           echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
           echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
           echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | sed 's/[][]//g; s/", "/\n- /g; s/"//g; s/^/- /' >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -75,108 +76,29 @@ jobs:
       long: ${{ steps.version.outputs.long }}
       deb: ${{ steps.version.outputs.deb }}
 
-  build-arch:
+  build:
     if: ${{ inputs.target != '' && inputs.arch != 'native' }}
     needs: [version]
-    strategy:
-      fail-fast: false
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
       pio_env: ${{ inputs.target }}
       platform: ${{ inputs.arch }}
 
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
   gather-artifacts:
     permissions:
       contents: write
       pull-requests: write
-    strategy:
-      fail-fast: false
     runs-on: ubuntu-latest
-    needs: [version, build-arch]
+    needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-*-*
@@ -189,7 +111,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -205,7 +127,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -224,7 +146,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -237,159 +159,3 @@ jobs:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           description: "Download firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && inputs.target != ''}}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && inputs.target != ''}}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-*-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: debug-elfs-*-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' && inputs.target != '' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -27,58 +27,39 @@ on:
 
 jobs:
   setup:
-    if: github.repository == 'meshtastic/firmware'
     strategy:
-      fail-fast: false
+      fail-fast: true
       matrix:
         arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+          - all
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
           cache: pip
       - run: pip install -U platformio
-      - name: Uncomment build epoch
-        shell: bash
-        run: |
-          sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
       - name: Generate matrix
         id: jsonStep
         run: |
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
           fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+          echo "$TARGETS" >> $GITHUB_STEP_SUMMARY
     outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
+      all: ${{ steps.jsonStep.outputs.all }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   version:
-    if: github.repository == 'meshtastic/firmware'
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -94,105 +75,30 @@ jobs:
     needs: setup
     strategy:
       fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.check) }}
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.board }}
-        run: bin/check-all.sh ${{ matrix.board }}
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
 
-  build-esp32:
+  build:
     needs: [setup, version]
     strategy:
       fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
 
   build-debian-src:
     if: github.repository == 'meshtastic/firmware'
@@ -203,7 +109,7 @@ jobs:
     secrets: inherit
 
   package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name == 'workflow_dispatch' }}
     uses: ./.github/workflows/package_pio_deps.yml
     with:
       pio_env: native-tft
@@ -213,60 +119,26 @@ jobs:
     if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
     uses: ./.github/workflows/test_native.yml
 
-  docker-deb-amd64:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
             platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
       push: false
 
   gather-artifacts:
@@ -288,26 +160,15 @@ jobs:
           - rp2350
           - stm32
     runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
+    needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -320,7 +181,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -336,7 +197,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -355,7 +216,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -381,7 +242,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -400,14 +261,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -450,14 +311,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -474,7 +335,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -505,14 +366,14 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/merge_queue.yml

@@ -7,27 +7,17 @@ on:
   # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
   merge_group:
 
-env:
-  FAIL_FAST_PER_ARCH: true
-
 jobs:
   setup:
     strategy:
       fail-fast: true
       matrix:
         arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+          - all
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -39,25 +29,18 @@ jobs:
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
           fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
     outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
+      all: ${{ steps.jsonStep.outputs.all }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -73,105 +56,29 @@ jobs:
     needs: setup
     strategy:
       fail-fast: true
-      matrix: ${{ fromJson(needs.setup.outputs.check) }}
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.board }}
-        run: bin/check-all.sh ${{ matrix.board }}
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
 
-  build-esp32:
+  build:
     needs: [setup, version]
     strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
 
   build-debian-src:
     if: github.repository == 'meshtastic/firmware'
@@ -192,54 +99,26 @@ jobs:
     if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker-deb-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
             platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
       push: false
 
   gather-artifacts:
@@ -260,26 +139,15 @@ jobs:
           - rp2350
           - stm32
     runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
+    needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -292,7 +160,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -308,7 +176,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -327,7 +195,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -353,7 +221,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -372,14 +240,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -422,14 +290,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -446,7 +314,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -477,14 +345,14 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_tests.yml

@@ -40,7 +40,7 @@ jobs:
       checks: write
       pull-requests: write
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           submodules: recursive
 
@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true

.github/workflows/release_channels.yml

@@ -60,7 +60,10 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
+        with:
+          # Always use master branch for version bumps
+          ref: master
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       # step 2
       - name: full scan
@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: report.sarif
           overwrite: true
@@ -41,7 +41,7 @@ jobs:
 
       # step 4
       - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v3
+        uses: github/codeql-action/upload-sarif@v4
         with:
           sarif_file: report.sarif
           category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -17,8 +17,10 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.0.0
+        uses: actions/stale@v10.1.0
         with:
           days-before-stale: 45
-          exempt-issue-labels: pinned,3.0
-          exempt-pr-labels: pinned,3.0
+          stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
+          close-issue-message: This issue has not had any comment since the last notice. It has been closed automatically. If this is incorrect, or the issue becomes relevant again, please request that it is reopened.
+          exempt-issue-labels: pinned,3.0,triaged,backlog
+          exempt-pr-labels: pinned,3.0,triaged,backlog

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -40,7 +40,7 @@ jobs:
 
       - name: Integration test
         run: |
-          .pio/build/coverage/program &
+          .pio/build/coverage/program -s &
           PID=$!
           timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
           echo "Simulator started, launching python test..."
@@ -59,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -94,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
@@ -108,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,20 +137,20 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.1
+        uses: dorny/test-reporter@v2.2.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       # - uses: actions/setup-python@v5
       #   with:
@@ -47,9 +47,9 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v5
+        uses: actions/setup-node@v6
         with:
-          node-version: 22
+          node-version: 24
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: true
 

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.2
+      ref: v1.7.3
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.471
-    - renovate@41.127.2
+    - checkov@3.2.492
+    - renovate@42.5.4
     - prettier@3.6.2
-    - trufflehog@3.90.8
+    - trufflehog@3.90.13
     - yamllint@1.37.1
     - bandit@1.8.6
-    - trivy@0.66.0
+    - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.13.1
-    - isort@6.0.1
+    - ruff@0.14.4
+    - isort@7.0.0
     - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.7
+    - actionlint@1.7.8
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.9.0
+    - black@25.11.0
     - git-diff-check
-    - gitleaks@8.28.0
+    - gitleaks@8.29.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-slim-trixie AS builder
+FROM python:3.14-slim-trixie AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC

README.md

@@ -37,4 +37,3 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
-

alpine.Dockerfile

@@ -3,12 +3,13 @@
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-alpine3.22 AS builder
+FROM python:3.14-alpine3.22 AS builder
 ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
 
 RUN apk --no-cache add \
-        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
+        bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
+        libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
         libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
@@ -40,8 +41,8 @@ LABEL org.opencontainers.image.title="Meshtastic" \
 USER root
 
 RUN apk --no-cache add \
-        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
-        libx11 libinput libxkbcommon \
+        shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
+        i2c-tools libuv libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

arch/esp32/esp32.ini

@@ -31,11 +31,13 @@ build_flags =
   -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
   -DAXP_DEBUG_PORT=Serial
   -DCONFIG_BT_NIMBLE_ENABLED
+  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
   -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
+  -DSERIAL_HAS_ON_RECEIVE
   -DLIBPAX_ARDUINO
   -DLIBPAX_WIFI
   -DLIBPAX_BLE
@@ -55,7 +57,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.1.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/esp32/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.0
+  lewisxhe/XPowersLib@0.3.1
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -7,7 +7,7 @@ extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
   ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 

arch/nrf52/nrf52840.ini

@@ -8,7 +8,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/d3f6e339534233c7217818867368767590ce549e.zip
+  https://github.com/meshtastic/platform-native/archive/f566d364204416cdbf298e349213f7d551f793d9.zip
 framework = arduino
 
 build_src_filter = 

arch/stm32/stm32.ini

@@ -37,6 +37,9 @@ build_flags =
   -DRADIOLIB_EXCLUDE_LR11X0=1
   -DHAL_DAC_MODULE_ONLY
   -DHAL_RNG_MODULE_ENABLED
+  -Wl,--wrap=__assert_func
+  -Wl,--wrap=strerror
+  -Wl,--wrap=_tzset_unlocked_r
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>

bin/device-install.bat

@@ -15,12 +15,12 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv heltec-v4"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
 SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
 SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv heltec-v4"
 
 GOTO getopts
 :help

bin/device-install.sh

@@ -31,21 +31,23 @@ MUIDB_8MB=(
     "seeed-sensecap-indicator"
 )
 BIGDB_16MB=(
-    "t-deck"
-    "mesh-tab"
-    "t-energy-s3"
     "dreamcatcher"
-    "ESP32-S3-Pico"
-    "m5stack-cores3"
-    "station-g2"
-    "t-eth-elite"
-    "tlora-pager"
-    "t-watch-s3"
     "elecrow-adv"
+    "ESP32-S3-Pico"
+    "heltec-v4"
+    "m5stack-cores3"
+    "mesh-tab"
+    "station-g2"
+    "t-deck"
+    "t-energy-s3"
+    "t-eth-elite"
+    "t-watch-s3"
+    "tlora-pager"
 )
 S3_VARIANTS=(
     "s3"
     "-v3"
+    "-v4"
     "t-deck"
     "wireless-paper"
     "wireless-tracker"

bin/generate_ci_matrix.py

@@ -1,28 +1,32 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
 
 """Generate the CI matrix."""
 
+import argparse
 import json
-import sys
-import random
 import re
 from platformio.project.config import ProjectConfig
 
-options = sys.argv[1:]
+parser = argparse.ArgumentParser(description="Generate the CI matrix")
+parser.add_argument("platform", help="Platform to build for")
+parser.add_argument(
+  "--level",
+  choices=["extra", "pr"],
+  nargs="*",
+  default=[],
+  help="Board level to build for (omit for full release boards)",
+)
+args = parser.parse_args()
 
 outlist = []
 
-if len(options) < 1:
-  print(json.dumps(outlist))
-  exit(1)
-
 cfg = ProjectConfig.get_instance()
 pio_envs = cfg.envs()
 
 # Gather all PlatformIO environments for filtering later
 all_envs = []
 for pio_env in pio_envs:
-  env_build_flags = cfg.get(f"env:{pio_env}", 'build_flags')
+  env_build_flags = cfg.get(f"env:{pio_env}", "build_flags")
   env_platform = None
   for flag in env_build_flags:
     # Extract the platform from the build flags
@@ -37,36 +41,35 @@ for pio_env in pio_envs:
     exit(1)
   # Store env details as a dictionary, and add to 'all_envs' list
   env = {
-    'name': pio_env,
-    'platform': env_platform,
-    'board_level': cfg.get(f"env:{pio_env}", 'board_level', default=None),
-    'board_check': bool(cfg.get(f"env:{pio_env}", 'board_check', default=False))
+    "ci": {"board": pio_env, "platform": env_platform},
+    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
+    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
   }
   all_envs.append(env)
 
 # Filter outputs based on options
 # Check is mutually exclusive with other options (except 'pr')
-if "check" in options:
+if "check" in args.platform:
   for env in all_envs:
-    if env['board_check']:
-      if "pr" in options:
-        if env['board_level'] == 'pr':
-          outlist.append(env['name'])
+    if env["board_check"]:
+      if "pr" in args.level:
+        if env["board_level"] == "pr":
+          outlist.append(env["ci"])
       else:
-        outlist.append(env['name'])
+        outlist.append(env["ci"])
 # Filter (non-check) builds by platform
 else:
   for env in all_envs:
-    if options[0] == env['platform']:
+    if args.platform == env["ci"]["platform"] or args.platform == "all":
       # Always include board_level = 'pr'
-      if env['board_level'] == 'pr':
-        outlist.append(env['name'])
+      if env["board_level"] == "pr":
+        outlist.append(env["ci"])
       # Include board_level = 'extra' when requested
-      elif "extra" in options and env['board_level'] == "extra":
-        outlist.append(env['name'])
+      elif "extra" in args.level and env["board_level"] == "extra":
+        outlist.append(env["ci"])
       # If no board level is specified, include in release builds (not PR)
-      elif "pr" not in options and not env['board_level']:
-        outlist.append(env['name'])
+      elif "pr" not in args.level and not env["board_level"]:
+        outlist.append(env["ci"])
 
 # Return as a JSON list
 print(json.dumps(outlist))

bin/kill-github-actions.sh

@@ -0,0 +1,116 @@
+#!/bin/bash
+
+# Script to cancel all running GitHub Actions workflows
+# Requires GitHub CLI (gh) to be installed and authenticated
+
+set -e
+
+# Colors for output
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[1;33m'
+NC='\033[0m' # No Color
+
+# Function to print colored output
+print_status() {
+    echo -e "${GREEN}[INFO]${NC} $1"
+}
+
+print_warning() {
+    echo -e "${YELLOW}[WARN]${NC} $1"
+}
+
+print_error() {
+    echo -e "${RED}[ERROR]${NC} $1"
+}
+
+# Check if gh CLI is installed
+if ! command -v gh &> /dev/null; then
+    print_error "GitHub CLI (gh) is not installed. Please install it first:"
+    echo "  brew install gh"
+    echo "  Or visit: https://cli.github.com/"
+    exit 1
+fi
+
+# Check if authenticated
+if ! gh auth status &> /dev/null; then
+    print_error "GitHub CLI is not authenticated. Please run:"
+    echo "  gh auth login"
+    exit 1
+fi
+
+# Get repository info
+REPO=$(gh repo view --json owner,name -q '.owner.login + "/" + .name')
+if [[ -z "$REPO" ]]; then
+    print_error "Could not determine repository. Make sure you're in a GitHub repository."
+    exit 1
+fi
+
+print_status "Working with repository: $REPO"
+
+# Get all active workflows (both queued and in-progress)
+print_status "Fetching active workflows (queued and in-progress)..."
+QUEUED_WORKFLOWS=$(gh run list --status queued --json databaseId,displayTitle,headBranch,status --limit 100)
+IN_PROGRESS_WORKFLOWS=$(gh run list --status in_progress --json databaseId,displayTitle,headBranch,status --limit 100)
+
+# Combine both lists
+ALL_WORKFLOWS=$(echo "$QUEUED_WORKFLOWS $IN_PROGRESS_WORKFLOWS" | jq -s 'add | unique_by(.databaseId)')
+
+if [[ "$ALL_WORKFLOWS" == "[]" ]]; then
+    print_status "No active workflows found."
+    exit 0
+fi
+
+# Parse and display active workflows
+echo
+print_warning "Found active workflows:"
+echo "$ALL_WORKFLOWS" | jq -r '.[] | "  - \(.displayTitle) (Branch: \(.headBranch), Status: \(.status), ID: \(.databaseId))"'
+
+echo
+read -p "Do you want to cancel ALL these workflows? (y/N): " -n 1 -r
+echo
+
+if [[ ! $REPLY =~ ^[Yy]$ ]]; then
+    print_status "Cancelled by user."
+    exit 0
+fi
+
+# Cancel each workflow
+print_status "Cancelling workflows..."
+CANCELLED_COUNT=0
+FAILED_COUNT=0
+
+while IFS= read -r WORKFLOW_ID; do
+    if [[ -n "$WORKFLOW_ID" ]]; then
+        print_status "Cancelling workflow ID: $WORKFLOW_ID"
+        if gh run cancel "$WORKFLOW_ID" 2>/dev/null; then
+            ((CANCELLED_COUNT++))
+        else
+            print_error "Failed to cancel workflow ID: $WORKFLOW_ID"
+            ((FAILED_COUNT++))
+        fi
+    fi
+done < <(echo "$ALL_WORKFLOWS" | jq -r '.[].databaseId')
+
+echo
+print_status "Summary:"
+echo "  - Cancelled: $CANCELLED_COUNT workflows"
+if [[ $FAILED_COUNT -gt 0 ]]; then
+    echo "  - Failed: $FAILED_COUNT workflows"
+fi
+
+print_status "Done!"
+
+# Optional: Show remaining active workflows
+echo
+print_status "Checking for any remaining active workflows..."
+REMAINING_QUEUED=$(gh run list --status queued --json databaseId --limit 10)
+REMAINING_IN_PROGRESS=$(gh run list --status in_progress --json databaseId --limit 10)
+REMAINING_ALL=$(echo "$REMAINING_QUEUED $REMAINING_IN_PROGRESS" | jq -s 'add | unique_by(.databaseId)')
+
+if [[ "$REMAINING_ALL" == "[]" ]]; then
+    print_status "All workflows successfully cancelled."
+else
+    REMAINING_COUNT=$(echo "$REMAINING_ALL" | jq '. | length')
+    print_warning "Still $REMAINING_COUNT workflows active (may take a moment to update status)"
+fi

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,21 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.16" date="2025-11-19">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.16</url>
+    </release>
+    <release version="2.7.15" date="2025-11-13">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
+    </release>
+    <release version="2.7.14" date="2025-11-03">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.14</url>
+    </release>
+    <release version="2.7.13" date="2025-10-11">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.13</url>
+    </release>
+    <release version="2.7.12" date="2025-10-01">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.12</url>
+    </release>
     <release version="2.7.11" date="2025-09-24">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.11</url>
     </release>

bin/platformio-custom.py

@@ -86,7 +86,7 @@ if platform.name == "espressif32":
 
 if platform.name == "nordicnrf52":
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py \"$BUILD_DIR/firmware.hex\" -c -f 0xADA52840 -o \"$BUILD_DIR/firmware.uf2\"",
                                         "Generating UF2 file"))
 
 Import("projenv")

bin/web.version

@@ -1 +1 @@
-2.6.4
+2.6.7

boards/ThinkNode-M3.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_eink",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M3",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "elecrow nrf",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "",
+  "vendor": "ELECROW"
+}

boards/ThinkNode-M6.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M6 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_thinknode_m6",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M6",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "ELECROW ThinkNode M6",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.elecrow.com/thinknode-m6-outdoor-solar-power-for-lora-powered-by-nrf52840-supports-gps.html",
+  "vendor": "ELECROW"
+}

boards/heltec_wireless_tracker_v2.json

@@ -0,0 +1,37 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker_v2"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker V2",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org",
+  "vendor": "Heltec"
+}

boards/muzi-base.json

@@ -0,0 +1,56 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_MUZI_BASE -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0xcafe"]],
+    "mcu": "nrf52840",
+    "variant": "muzi-base",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Muzi Base",
+  "url": "https://muzi.works/",
+  "vendor": "MuziWorks",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "blackmagic",
+      "cmsis-dap",
+      "mbed",
+      "stlink"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  }
+}

boards/r1-neo.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "Muzi R1 Neo",
+    "mcu": "nrf52840",
+    "variant": "r1-neo",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino", "freertos"],
+  "name": "WisCore RAK4631 Board",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://muzi.works/",
+  "vendor": "Muzi Works"
+}

debian/changelog

@@ -1,4 +1,29 @@
-meshtasticd (2.7.11.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.16.0) unstable; urgency=medium
+
+  * Version 2.7.16
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 19 Nov 2025 16:12:32 +0000
+
+
+meshtasticd (2.7.15.0) unstable; urgency=medium
+
+  * Version 2.7.15
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 13 Nov 2025 12:31:57 +0000
+
+meshtasticd (2.7.14.0) unstable; urgency=medium
+
+  * Version 2.7.14
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 03 Nov 2025 16:11:31 +0000
+
+meshtasticd (2.7.13.0) unstable; urgency=medium
+
+  * Version 2.7.13
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Sat, 11 Oct 2025 15:27:28 +0000
+
+meshtasticd (2.7.12.0) unstable; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -7,4 +32,7 @@ meshtasticd (2.7.11.0) UNRELEASED; urgency=medium
   [  ]
   * GitHub Actions Automatic version bump
 
- --  <github-actions[bot]@users.noreply.github.com>  Wed, 24 Sep 2025 11:01:13 +0000
+  [ GitHub Actions ]
+  * Version 2.7.12
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 01 Oct 2025 19:51:41 +0000

debian/control

@@ -3,6 +3,7 @@ Section: misc
 Priority: optional
 Maintainer: Austin Lane <vidplace7@gmail.com>
 Build-Depends: debhelper-compat (= 13),
+               libc6-dev (>= 2.38) | libbsd-dev,
                lsb-release,
                tar,
                gzip,

meshtasticd.spec.rpkg

@@ -33,6 +33,7 @@ BuildRequires: python3dist(grpcio[protobuf])
 BuildRequires: python3dist(grpcio-tools)
 BuildRequires: git-core
 BuildRequires: gcc-c++
+BuildRequires: (glibc-devel >= 2.38) or pkgconfig(libbsd-overlay)
 BuildRequires: pkgconfig(yaml-cpp)
 BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)
@@ -49,6 +50,13 @@ BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
 
+# libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
+%if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
+BuildRequires: glibc-devel >= 2.38
+%else
+BuildRequires: pkgconfig(libbsd-overlay)
+%endif
+
 Requires:      systemd-udev
 
 %description

platformio.ini

@@ -56,12 +56,13 @@ build_flags = -Wno-missing-field-initializers
 	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
 	#-D OLED_PL=1
 	#-D DEBUG_HEAP=1 ; uncomment to add free heap space / memory leak debugging logs
+	#-D DEBUG_LOOP_TIMING=1 ; uncomment to add main loop timing logs
 
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -69,7 +70,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
-	https://github.com/meshtastic/ArduinoThread/archive/7c3ee9e1951551b949763b1f5280f8db1fa4068d.zip
+	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
 	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
 	nanopb/Nanopb@0.4.91
 	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
@@ -114,12 +115,13 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.3.0
+	# jgromes/RadioLib@7.4.0
+	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/9ed5355a24059750e9b2eb5d669574d9ea42a37b.zip
+	https://github.com/meshtastic/device-ui/archive/28167c67dfd13015a0b5eef1828f95fe8e3ab7c3.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -163,7 +165,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
-	dfrobot/DFRobot_RTU@1.0.3
+	dfrobot/DFRobot_RTU@1.0.6
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
@@ -175,11 +177,13 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
 	adafruit/Adafruit LTR390 Library@1.1.2
 	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.5
+	adafruit/Adafruit PCT2075@1.0.6
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
 	adafruit/Adafruit TSL2561@1.1.2
+	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/BH1750_WE@^1.1.10
+	wollewald/BH1750_WE@^1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]

src/AudioThread.h

@@ -11,6 +11,11 @@
 #include <AudioOutputI2S.h>
 #include <ESP8266SAM.h>
 
+#ifdef USE_XL9555
+#include "ExtensionIOXL9555.hpp"
+extern ExtensionIOXL9555 io;
+#endif
+
 #define AUDIO_THREAD_INTERVAL_MS 100
 
 class AudioThread : public concurrency::OSThread
@@ -20,12 +25,16 @@ class AudioThread : public concurrency::OSThread
 
     void beginRttl(const void *data, uint32_t len)
     {
+#ifdef T_LORA_PAGER
+        io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+#endif
         setCPUFast(true);
         rtttlFile = new AudioFileSourcePROGMEM(data, len);
         i2sRtttl = new AudioGeneratorRTTTL();
         i2sRtttl->begin(rtttlFile, audioOut);
     }
 
+    // Also handles actually playing the RTTTL, needs to be called in loop
     bool isPlaying()
     {
         if (i2sRtttl != nullptr) {
@@ -45,6 +54,9 @@ class AudioThread : public concurrency::OSThread
         rtttlFile = nullptr;
 
         setCPUFast(false);
+#ifdef T_LORA_PAGER
+        io.digitalWrite(EXPANDS_AMP_EN, LOW);
+#endif
     }
 
     void readAloud(const char *text)
@@ -55,10 +67,16 @@ class AudioThread : public concurrency::OSThread
             i2sRtttl = nullptr;
         }
 
+#ifdef T_LORA_PAGER
+        io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+#endif
         ESP8266SAM *sam = new ESP8266SAM;
         sam->Say(audioOut, text);
         delete sam;
         setCPUFast(false);
+#ifdef T_LORA_PAGER
+        io.digitalWrite(EXPANDS_AMP_EN, LOW);
+#endif
     }
 
   protected:

src/DebugConfiguration.h

@@ -13,6 +13,11 @@ extern MemGet memGet;
 #define LED_STATE_ON 1
 #endif
 
+// WIFI LED
+#ifndef WIFI_STATE_ON
+#define WIFI_STATE_ON 1
+#endif
+
 // -----------------------------------------------------------------------------
 // DEBUG
 // -----------------------------------------------------------------------------
@@ -147,7 +152,9 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && defined(USE_CH390D)
+#include <ESP32_CH390.h>
+#elif HAS_ETHERNET && !defined(USE_WS5500)
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 

src/DisplayFormatters.cpp

@@ -76,9 +76,6 @@ const char *DisplayFormatters::getDeviceRole(meshtastic_Config_DeviceConfig_Role
     case meshtastic_Config_DeviceConfig_Role_ROUTER_LATE:
         return "Router Late";
         break;
-    case meshtastic_Config_DeviceConfig_Role_REPEATER:
-        return "Repeater";
-        break;
     default:
         return "Unknown";
         break;

src/NodeStatus.h

@@ -14,16 +14,16 @@ class NodeStatus : public Status
     CallbackObserver<NodeStatus, const NodeStatus *> statusObserver =
         CallbackObserver<NodeStatus, const NodeStatus *>(this, &NodeStatus::updateStatus);
 
-    uint8_t numOnline = 0;
-    uint8_t numTotal = 0;
+    uint16_t numOnline = 0;
+    uint16_t numTotal = 0;
 
-    uint8_t lastNumTotal = 0;
+    uint16_t lastNumTotal = 0;
 
   public:
     bool forceUpdate = false;
 
     NodeStatus() { statusType = STATUS_TYPE_NODE; }
-    NodeStatus(uint8_t numOnline, uint8_t numTotal, bool forceUpdate = false) : Status()
+    NodeStatus(uint16_t numOnline, uint16_t numTotal, bool forceUpdate = false) : Status()
     {
         this->forceUpdate = forceUpdate;
         this->numOnline = numOnline;
@@ -34,11 +34,11 @@ class NodeStatus : public Status
 
     void observe(Observable<const NodeStatus *> *source) { statusObserver.observe(source); }
 
-    uint8_t getNumOnline() const { return numOnline; }
+    uint16_t getNumOnline() const { return numOnline; }
 
-    uint8_t getNumTotal() const { return numTotal; }
+    uint16_t getNumTotal() const { return numTotal; }
 
-    uint8_t getLastNumTotal() const { return lastNumTotal; }
+    uint16_t getLastNumTotal() const { return lastNumTotal; }
 
     bool matches(const NodeStatus *newStatus) const
     {
@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %u online, %u total", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -194,7 +194,7 @@ static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level se
 
 #ifdef BATTERY_PIN
 
-static void adcEnable()
+void battery_adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -214,7 +214,7 @@ static void adcEnable()
 #endif
 }
 
-static void adcDisable()
+static void battery_adcDisable()
 {
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -278,6 +278,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 break;
             }
         }
+#if defined(BATTERY_CHARGING_INV)
+        // bit of trickery to show 99% up until the charge finishes
+        if (!digitalRead(BATTERY_CHARGING_INV) && battery_SOC > 99)
+            battery_SOC = 99;
+#endif
         return clamp((int)(battery_SOC), 0, 100);
     }
 
@@ -320,7 +325,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             uint32_t raw = 0;
             float scaled = 0;
 
-            adcEnable();
+            battery_adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
@@ -332,7 +337,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
-            adcDisable();
+            battery_adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -455,6 +460,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
+#elif defined(MUZI_BASE)
+        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -470,6 +477,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
+#elif defined(BATTERY_CHARGING_INV)
+        return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
@@ -562,6 +571,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                    config.power.device_battery_ina_address) {
             if (!ina226Sensor.isInitialized())
                 return ina226Sensor.runOnce() > 0;
+            return ina226Sensor.isRunning();
         } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
                    config.power.device_battery_ina_address) {
             if (!ina260Sensor.isInitialized())
@@ -691,7 +701,26 @@ bool Power::setup()
 #ifdef NRF_APM
     found = true;
 #endif
-
+#ifdef EXT_PWR_DETECT
+    attachInterrupt(
+        EXT_PWR_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
+#endif
+#ifdef BATTERY_CHARGING_INV
+    attachInterrupt(
+        BATTERY_CHARGING_INV,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
+#endif
     enabled = found;
     low_voltage_counter = 0;
 
@@ -748,6 +777,8 @@ void Power::shutdown()
     if (screen) {
 #ifdef T_DECK_PRO
         screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
+#elif USE_EINK
+        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -828,8 +859,11 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
-    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
-              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+    if (millis() > lastLogTime + 50 * 1000) {
+        LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(),
+                  powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+        lastLogTime = millis();
+    }
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
@@ -892,13 +926,8 @@ void Power::readPowerStatus()
             low_voltage_counter++;
             LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
             if (low_voltage_counter > 10) {
-#ifdef ARCH_NRF52
-                // We can't trigger deep sleep on NRF52, it's freezing the board
-                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
-#else
                 LOG_INFO("Low voltage detected, trigger deep sleep");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
-#endif
             }
         } else {
             low_voltage_counter = 0;

src/SerialConsole.cpp

@@ -6,6 +6,14 @@
 #include "configuration.h"
 #include "time.h"
 
+#if defined(ARDUINO_USB_CDC_ON_BOOT) && ARDUINO_USB_CDC_ON_BOOT
+#define IS_USB_SERIAL
+#ifdef SERIAL_HAS_ON_RECEIVE
+#undef SERIAL_HAS_ON_RECEIVE
+#endif
+#include "HWCDC.h"
+#endif
+
 #ifdef RP2040_SLOW_CLOCK
 #define Port Serial2
 #else
@@ -22,7 +30,12 @@ SerialConsole *console;
 
 void consoleInit()
 {
-    new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
+    auto sc = new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
+
+#if defined(SERIAL_HAS_ON_RECEIVE)
+    // onReceive does only exist for HardwareSerial not for USB CDC serial
+    Port.onReceive([sc]() { sc->rxInt(); });
+#endif
     DEBUG_PORT.rpInit(); // Simply sets up semaphore
 }
 
@@ -37,6 +50,7 @@ void consolePrintf(const char *format, ...)
 
 SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), concurrency::OSThread("SerialConsole")
 {
+    api_type = TYPE_SERIAL;
     assert(!console);
     console = this;
     canWrite = false; // We don't send packets to our port until it has talked to us first
@@ -66,13 +80,20 @@ int32_t SerialConsole::runOnce()
 {
 #ifdef HELTEC_MESH_SOLAR
     // After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
-    if(moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port
-        && moduleConfig.serial.mode==meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG)
-    {
+    if (moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port &&
+        moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG) {
         return 250;
     }
 #endif
-    return runOncePart();
+
+    int32_t delay = runOncePart();
+#if defined(SERIAL_HAS_ON_RECEIVE) || defined(CONFIG_IDF_TARGET_ESP32S2)
+    return Port.available() ? delay : INT32_MAX;
+#elif defined(IS_USB_SERIAL)
+    return HWCDC::isPlugged() ? delay : (1000 * 20);
+#else
+    return delay;
+#endif
 }
 
 void SerialConsole::flush()
@@ -80,6 +101,18 @@ void SerialConsole::flush()
     Port.flush();
 }
 
+// trigger tx of serial data
+void SerialConsole::onNowHasData(uint32_t fromRadioNum)
+{
+    setIntervalFromNow(0);
+}
+
+// trigger rx of serial data
+void SerialConsole::rxInt()
+{
+    setIntervalFromNow(0);
+}
+
 // For the serial port we can't really detect if any client is on the other side, so instead just look for recent messages
 bool SerialConsole::checkIsConnected()
 {

src/SerialConsole.h

@@ -32,11 +32,14 @@ class SerialConsole : public StreamAPI, public RedirectablePrint, private concur
     virtual int32_t runOnce() override;
 
     void flush();
+    void rxInt();
 
   protected:
     /// Check the current underlying physical link to see if the client is currently connected
     virtual bool checkIsConnected() override;
 
+    virtual void onNowHasData(uint32_t fromRadioNum) override;
+
     /// Possibly switch to protobufs if we see a valid protobuf message
     virtual void log_to_serial(const char *logLevel, const char *format, va_list arg);
 };

src/buzz/BuzzerFeedbackThread.cpp

@@ -5,7 +5,7 @@
 
 BuzzerFeedbackThread *buzzerFeedbackThread;
 
-BuzzerFeedbackThread::BuzzerFeedbackThread() : OSThread("BuzzerFeedback")
+BuzzerFeedbackThread::BuzzerFeedbackThread()
 {
     if (inputBroker)
         inputObserver.observe(inputBroker);
@@ -15,14 +15,11 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
 {
     // Only provide feedback if buzzer is enabled for notifications
     if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
-        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY) {
+        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY ||
+        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY) {
         return 0; // Let other handlers process the event
     }
 
-    // Track last event time for potential future use
-    lastEventTime = millis();
-    needsUpdate = true;
-
     // Handle different input events with appropriate buzzer feedback
     switch (event->inputEvent) {
     case INPUT_BROKER_USER_PRESS:
@@ -62,14 +59,3 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
 
     return 0; // Allow other handlers to process the event
 }
-
-int32_t BuzzerFeedbackThread::runOnce()
-{
-    // This thread is primarily event-driven, but we can use runOnce
-    // for any periodic tasks if needed in the future
-
-    needsUpdate = false;
-
-    // Run every 100ms when active, less frequently when idle
-    return needsUpdate ? 100 : 1000;
-}

src/buzz/BuzzerFeedbackThread.h

@@ -4,7 +4,7 @@
 #include "concurrency/OSThread.h"
 #include "input/InputBroker.h"
 
-class BuzzerFeedbackThread : public concurrency::OSThread
+class BuzzerFeedbackThread
 {
     CallbackObserver<BuzzerFeedbackThread, const InputEvent *> inputObserver =
         CallbackObserver<BuzzerFeedbackThread, const InputEvent *>(this, &BuzzerFeedbackThread::handleInputEvent);
@@ -12,13 +12,6 @@ class BuzzerFeedbackThread : public concurrency::OSThread
   public:
     BuzzerFeedbackThread();
     int handleInputEvent(const InputEvent *event);
-
-  protected:
-    virtual int32_t runOnce() override;
-
-  private:
-    uint32_t lastEventTime = 0;
-    bool needsUpdate = false;
 };
 
 extern BuzzerFeedbackThread *buzzerFeedbackThread;

src/concurrency/OSThread.cpp

@@ -90,7 +90,9 @@ void OSThread::run()
     if (heap < newHeap)
         LOG_HEAP("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
 #endif
-
+#ifdef DEBUG_LOOP_TIMING
+    LOG_DEBUG("====== Thread next run in: %d", newDelay);
+#endif
     runned();
 
     if (newDelay >= 0)

src/configuration.h

@@ -33,6 +33,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "pcf8563.h"
 #endif
 
+/* Offer chance for variant-specific defines */
+#include "variant.h"
+
 // -----------------------------------------------------------------------------
 // Version
 // -----------------------------------------------------------------------------
@@ -117,6 +120,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SX126X_MAX_POWER 22
 #endif
 
+#ifdef USE_GC1109_PA
+// Power Amps are often non-linear, so we can use an array of values for the power curve
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
+#endif
+
+#ifdef RAK13302
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
+#endif
+
 // Default system gain to 0 if not defined
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
@@ -214,6 +228,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ICM20948_ADDR_ALT 0x68
 #define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
+#define DA217_ADDR 0x26
 
 // -----------------------------------------------------------------------------
 // LED
@@ -236,6 +251,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
 #define CST328_ADDR 0x1A
+#define CHSC6X_ADDR 0x2E
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -254,9 +270,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // convert 24-bit color to 16-bit (56K)
 #define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
 
-/* Step #1: offer chance for variant-specific defines */
-#include "variant.h"
-
 #if defined(VEXT_ENABLE) && !defined(VEXT_ON_VALUE)
 // Older variant.h files might not be defining this value, so stay with the old default
 #define VEXT_ON_VALUE LOW
@@ -383,6 +396,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define HAS_RGB_LED
 #endif
 
+#ifndef LED_STATE_OFF
+#define LED_STATE_OFF 0
+#endif
+#ifndef LED_STATE_ON
+#define LED_STATE_ON 1
+#endif
+
 // default mapping of pins
 #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
 #define ALT_BUTTON_PIN PIN_BUTTON2

src/detect/ScanI2C.cpp

@@ -25,8 +25,8 @@ ScanI2C::FoundDevice ScanI2C::firstScreen() const
 
 ScanI2C::FoundDevice ScanI2C::firstRTC() const
 {
-    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563};
-    return firstOfOrNONE(2, types);
+    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563, RTC_RX8130CE};
+    return firstOfOrNONE(3, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const

src/detect/ScanI2C.h

@@ -14,6 +14,7 @@ class ScanI2C
         SCREEN_ST7567,
         RTC_RV3028,
         RTC_PCF8563,
+        RTC_RX8130CE,
         CARDKB,
         TDECKKB,
         BBQ10KB,
@@ -81,7 +82,10 @@ class ScanI2C
         BHI260AP,
         BMM150,
         TSL2561,
-        DRV2605
+        DRV2605,
+        BH1750,
+        DA217,
+        CHSC6X
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CConsumer.cpp

@@ -0,0 +1,16 @@
+#include "ScanI2CConsumer.h"
+#include <forward_list>
+
+static std::forward_list<ScanI2CConsumer *> ScanI2CConsumers;
+
+ScanI2CConsumer::ScanI2CConsumer()
+{
+    ScanI2CConsumers.push_front(this);
+}
+
+void ScanI2CCompleted(ScanI2C *i2cScanner)
+{
+    for (ScanI2CConsumer *consumer : ScanI2CConsumers) {
+        consumer->i2cScanFinished(i2cScanner);
+    }
+}

src/detect/ScanI2CConsumer.h

@@ -0,0 +1,13 @@
+#pragma once
+
+#include "ScanI2C.h"
+#include <stddef.h>
+
+class ScanI2CConsumer
+{
+  public:
+    ScanI2CConsumer();
+    virtual void i2cScanFinished(ScanI2C *i2cScanner) = 0;
+};
+
+void ScanI2CCompleted(ScanI2C *i2cScanner);

src/detect/ScanI2CTwoWire.cpp

@@ -106,6 +106,7 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
         if (i2cBus->available())
             i2cBus->read();
     }
+    LOG_DEBUG("Register value: 0x%x", value);
     return value;
 }
 
@@ -197,6 +198,9 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #ifdef PCF8563_RTC
                 SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563", (uint8_t)addr.address)
 #endif
+#ifdef RX8130CE_RTC
+                SCAN_SIMPLE_CASE(RX8130CE_RTC, RTC_RX8130CE, "RX8130CE", (uint8_t)addr.address)
+#endif
 
             case CARDKB_ADDR:
                 // Do we have the RAK14006 instead?
@@ -374,13 +378,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
-                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c || registerValue == 0xc8d) {
-                    type = SHT4X;
-                    logFoundDevice("SHT4X", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
+                if (registerValue == 0x5449) {
                     type = OPT3001;
                     logFoundDevice("OPT3001", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
+                    type = SHT4X;
+                    logFoundDevice("SHT4X", (uint8_t)addr.address);
                 } else {
                     type = SHT31;
                     logFoundDevice("SHT31", (uint8_t)addr.address);
@@ -461,8 +465,23 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
+            case TCA9555_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
+                if (registerValue == 0x13) {
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
+                    if (registerValue == 0x81) {
+                        type = DA217;
+                        logFoundDevice("DA217", (uint8_t)addr.address);
+                    } else {
+                        type = TCA9555;
+                        logFoundDevice("TCA9555", (uint8_t)addr.address);
+                    }
+                } else {
+                    type = TCA9555;
+                    logFoundDevice("TCA9555", (uint8_t)addr.address);
+                }
+                break;
             case TSL25911_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
                 if (registerValue == 0x50) {
@@ -481,7 +500,26 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
+            case LTR553ALS_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
+                if (registerValue == 0x92) {                                                       // LTR553ALS Part ID
+                    type = LTR553ALS;
+                    logFoundDevice("LTR553ALS", (uint8_t)addr.address);
+                } else {
+                    // Test BH1750 - send power on command
+                    i2cBus->beginTransmission(addr.address);
+                    i2cBus->write(0x01); // Power On command
+                    uint8_t bh1750_error = i2cBus->endTransmission();
+                    if (bh1750_error == 0) {
+                        type = BH1750;
+                        logFoundDevice("BH1750", (uint8_t)addr.address);
+                    } else {
+                        LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address);
+                    }
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
@@ -509,6 +547,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case ICM20948_ADDR:     // same as BMX160_ADDR
             case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
+#ifdef HAS_ICM20948
+                type = ICM20948;
+                logFoundDevice("ICM20948", (uint8_t)addr.address);
+                break;
+#endif
                 if (registerValue == 0xEA) {
                     type = ICM20948;
                     logFoundDevice("ICM20948", (uint8_t)addr.address);
@@ -577,7 +620,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
     scanPort(port, nullptr, 0);
 }
 
-TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
+TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address)
 {
     if (address.port == ScanI2C::I2CPort::WIRE) {
         return &Wire;

src/detect/ScanI2CTwoWire.h

@@ -23,12 +23,12 @@ class ScanI2CTwoWire : public ScanI2C
 
     ScanI2C::FoundDevice find(ScanI2C::DeviceType) const override;
 
-    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
-
     bool exists(ScanI2C::DeviceType) const override;
 
     size_t countDevices() const override;
 
+    static TwoWire *fetchI2CBus(ScanI2C::DeviceAddress);
+
   protected:
     FoundDevice firstOfOrNONE(size_t, DeviceType[]) const override;
 

src/gps/GPS.cpp

@@ -38,14 +38,16 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-#if defined(GPS_SERIAL_PORT)
-HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
-#else
-HardwareSerial *GPS::_serial_gps = &Serial1;
+#ifndef GPS_SERIAL_PORT
+#define GPS_SERIAL_PORT Serial1
 #endif
+
+#if defined(ARCH_NRF52)
+Uart *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#elif defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
 #elif defined(ARCH_RP2040)
-SerialUART *GPS::_serial_gps = &Serial1;
+SerialUART *GPS::_serial_gps = &GPS_SERIAL_PORT;
 #else
 HardwareSerial *GPS::_serial_gps = nullptr;
 #endif
@@ -240,6 +242,9 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
             buffer[bytesRead] = b;
             bytesRead++;
             if ((bytesRead == 767) || (b == '\r')) {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(debugmsg.c_str());
+#endif
                 if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
 #ifdef GPS_DEBUG
                     LOG_DEBUG("Found: %s", message); // Log the found message
@@ -247,9 +252,6 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
                     return GNSS_RESPONSE_OK;
                 } else {
                     bytesRead = 0;
-#ifdef GPS_DEBUG
-                    LOG_DEBUG(debugmsg.c_str());
-#endif
                 }
             }
         }
@@ -494,22 +496,10 @@ bool GPS::setup()
     if (!didSerialInit) {
         int msglen = 0;
         if (tx_gpio && gnssModel == GNSS_MODEL_UNKNOWN) {
-#ifdef TRACKER_T1000_E
-            // add power up/down strategy, improve ag3335 detection success
-            digitalWrite(PIN_GPS_EN, LOW);
-            delay(500);
-            digitalWrite(GPS_VRTC_EN, LOW);
-            delay(1000);
-            digitalWrite(GPS_VRTC_EN, HIGH);
-            delay(500);
-            digitalWrite(PIN_GPS_EN, HIGH);
-            delay(1000);
-#endif
             if (probeTries < GPS_PROBETRIES) {
-                LOG_DEBUG("Probe for GPS at %d", serialSpeeds[speedSelect]);
                 gnssModel = probe(serialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (++speedSelect == array_count(serialSpeeds)) {
+                    if (currentStep == 0 && ++speedSelect == array_count(serialSpeeds)) {
                         speedSelect = 0;
                         ++probeTries;
                     }
@@ -518,10 +508,9 @@ bool GPS::setup()
             // Rare Serial Speeds
 #ifndef CONFIG_IDF_TARGET_ESP32C6
             if (probeTries == GPS_PROBETRIES) {
-                LOG_DEBUG("Probe for GPS at %d", rareSerialSpeeds[speedSelect]);
                 gnssModel = probe(rareSerialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (++speedSelect == array_count(rareSerialSpeeds)) {
+                    if (currentStep == 0 && ++speedSelect == array_count(rareSerialSpeeds)) {
                         LOG_WARN("Give up on GPS probe and set to %d", GPS_BAUDRATE);
                         return true;
                     }
@@ -1033,7 +1022,7 @@ void GPS::down()
     LOG_DEBUG("%us until next search", sleepTime / 1000);
 
     // If update interval less than 10 seconds, no attempt to sleep
-    if (updateInterval <= 10 * 1000UL || sleepTime == 0)
+    if (updateInterval <= GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS || sleepTime == 0)
         setPowerState(GPS_IDLE);
 
     else {
@@ -1094,7 +1083,7 @@ int32_t GPS::runOnce()
             return disable();
         }
         if (!setup())
-            return 2000; // Setup failed, re-run in two seconds
+            return currentDelay; // Setup failed, re-run in two seconds
 
         // We have now loaded our saved preferences from flash
         if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
@@ -1104,11 +1093,29 @@ int32_t GPS::runOnce()
         publishUpdate();
     }
 
-    // Repeaters have no need for GPS
-    if (config.device.role == meshtastic_Config_DeviceConfig_Role_REPEATER) {
-        return disable();
-    }
-
+    // ======================== GPS_ACTIVE state ========================
+    // In GPS_ACTIVE state, GPS is powered on and we're receiving NMEA messages.
+    // We use the following logic to determine when to update the local position
+    // or time by running GPS::publishUpdate.
+    // Note: Local position update is asynchronous to position broadcast. We
+    // generally run this state every gps_update_interval seconds, and in most cases
+    // gps_update_interval is faster than the position broadcast interval so there's a
+    // fresh position ready when the device wants to broadcast one on the mesh.
+    //
+    // 1. Got a time for the first time --> set the time, don't publish.
+    // 2. Got a lock for the first time
+    //   --> If gps_update_interval is <= 10s --> publishUpdate
+    //   --> Otherwise, hold for MIN(gps_update_interval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS, 20s)
+    //  3. Got a lock after turning back on
+    //   --> If gps_update_interval is <= 10s --> publishUpdate
+    //   --> Otherwise, hold for MIN(gps_update_interval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS, 20s)
+    // 4. Hold has expired
+    //   --> If we have a time and a location --> publishUpdate
+    //   --> down()
+    // 5. Search time has expired
+    //   --> If we have a time and a location --> publishUpdate
+    //   --> If we had a location before but don't now --> publishUpdate
+    //   --> down()
     if (whileActive()) {
         // if we have received valid NMEA claim we are connected
         setConnected();
@@ -1118,55 +1125,81 @@ int32_t GPS::runOnce()
     if (!config.position.fixed_position && powerState != GPS_ACTIVE && scheduling.isUpdateDue())
         up();
 
-    // If we've already set time from the GPS, no need to ask the GPS
+    // quality of the previous fix. We set it to 0 when we go down, so it's a way
+    // to check if we're getting a lock after being GPS_OFF.
+    uint8_t prev_fixQual = fixQual;
+
+    if (powerState == GPS_ACTIVE) {
+        // if gps_update_interval is <=10s, GPS never goes off, so we treat that differently
+        uint32_t updateInterval = Default::getConfiguredOrDefaultMs(config.position.gps_update_interval);
+
+        // 1. Got a time for the first time
         bool gotTime = (getRTCQuality() >= RTCQualityGPS);
         if (!gotTime && lookForTime()) { // Note: we count on this && short-circuiting and not resetting the RTC time
             gotTime = true;
-        shouldPublish = true;
         }
 
-    uint8_t prev_fixQual = fixQual;
+        // 2. Got a lock for the first time, or 3. Got a lock after turning back on
         bool gotLoc = lookForLocation();
-    if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
+        if (gotLoc) {
+#ifdef GPS_DEBUG
+            if (!hasValidLocation) { // declare that we have location ASAP
                 LOG_DEBUG("hasValidLocation RISING EDGE");
+            }
+#endif
+            if (updateInterval <= GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS) {
                 hasValidLocation = true;
                 shouldPublish = true;
-        // Hold for 20secs after getting a lock to download ephemeris etc
-        fixHoldEnds = millis() + 20000;
-    }
-
-    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
-        fixHoldEnds = millis() + 20000;
-        shouldPublish = true; // Publish immediately, since next publish is at end of hold
-    }
-
-    bool tooLong = scheduling.searchedTooLong();
-    if (tooLong)
-        LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time");
-
-    // Once we get a location we no longer desperately want an update
-    if ((gotLoc && gotTime) || tooLong) {
-        if (tooLong && !gotLoc) {
-            // we didn't get a location during this ack window, therefore declare loss of lock
-            if (hasValidLocation) {
-                LOG_DEBUG("hasValidLocation FALLING EDGE");
-            }
-            p = meshtastic_Position_init_default;
-            hasValidLocation = false;
-        }
-        if (millis() > fixHoldEnds) {
-            shouldPublish = true; // publish our update at the end of the lock hold
-            publishUpdate();
-            down();
+            } else if (!hasValidLocation || prev_fixQual == 0 || (fixHoldEnds + GPS_THREAD_INTERVAL) < millis()) {
+                hasValidLocation = true;
+                // Hold for up to 20secs after getting a lock to download ephemeris etc
+                uint32_t holdTime = updateInterval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS;
+                if (holdTime > GPS_FIX_HOLD_MAX_MS)
+                    holdTime = GPS_FIX_HOLD_MAX_MS;
+                fixHoldEnds = millis() + holdTime;
 #ifdef GPS_DEBUG
-        } else {
-            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
+                LOG_DEBUG("Holding for %ums after lock", holdTime);
 #endif
             }
         }
 
-    // If state has changed do a publish
+        bool tooLong = scheduling.searchedTooLong();
+        if (tooLong && !gotLoc) {
+            LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time");
+            // we didn't get a location during this ack window, therefore declare loss of lock
+            if (hasValidLocation) {
+                p = meshtastic_Position_init_default;
+                hasValidLocation = false;
+                shouldPublish = true;
+#ifdef GPS_DEBUG
+                LOG_DEBUG("hasValidLocation FALLING EDGE");
+#endif
+            }
+        }
+
+        // Hold has expired , Search time has expired, we got a time only, or we never needed to hold.
+        bool holdExpired = (fixHoldEnds != 0 && millis() > fixHoldEnds);
+        if (shouldPublish || tooLong || holdExpired) {
+            if (gotTime && hasValidLocation) {
+                shouldPublish = true;
+            }
+            if (shouldPublish) {
+                fixHoldEnds = 0;
                 publishUpdate();
+            }
+
+            // There's a chance we just got a time, so keep going to see if we can get a location too
+            if (tooLong || holdExpired) {
+                down();
+            }
+
+#ifdef GPS_DEBUG
+        } else if (fixHoldEnds != 0) {
+            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
+#endif
+        }
+    }
+    // ===================== end GPS_ACTIVE state ========================
 
     if (config.position.fixed_position == true && hasValidLocation)
         return disable(); // This should trigger when we have a fixed position, and get that first position
@@ -1223,6 +1256,10 @@ static const char *DETECTED_MESSAGE = "%s detected";
 
 GnssModel_t GPS::probe(int serialSpeed)
 {
+    uint8_t buffer[768] = {0};
+
+    switch (currentStep) {
+    case 0: {
 #if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
         _serial_gps->end();
         _serial_gps->begin(serialSpeed);
@@ -1232,15 +1269,32 @@ GnssModel_t GPS::probe(int serialSpeed)
         _serial_gps->begin(serialSpeed);
 #else
         if (_serial_gps->baudRate() != serialSpeed) {
-        LOG_DEBUG("Set Baud to %i", serialSpeed);
+            LOG_DEBUG("Set GPS Baud to %i", serialSpeed);
             _serial_gps->updateBaudRate(serialSpeed);
         }
 #endif
 
         memset(&ublox_info, 0, sizeof(ublox_info));
-    uint8_t buffer[768] = {0};
         delay(100);
 
+#if defined(PIN_GPS_RESET) && PIN_GPS_RESET != -1
+        digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
+        delay(10);
+        digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
+
+        // attempt to detect the chip based on boot messages
+        std::vector<ChipInfo> passive_detect = {
+            {"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
+            {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
+            {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352},
+            {"UC6580", "UC6580", GNSS_MODEL_UC6580},
+            // as L76K is sort of a last ditch effort, we won't attempt to detect it by startup messages for now.
+            /*{"L76K", "SW=URANUS", GNSS_MODEL_MTK}*/};
+        GnssModel_t detectedDriver = getProbeResponse(500, passive_detect, serialSpeed);
+        if (detectedDriver != GNSS_MODEL_UNKNOWN) {
+            return detectedDriver;
+        }
+#endif
         // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
         _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
         delay(20);
@@ -1253,19 +1307,31 @@ GnssModel_t GPS::probe(int serialSpeed)
         _serial_gps->write("$CFGMSG,0,1,0,1*1B\r\n");
         _serial_gps->write("$CFGMSG,0,2,0,1*18\r\n");
         _serial_gps->write("$CFGMSG,0,3,0,1*19\r\n");
-    delay(20);
+        currentDelay = 20;
+        currentStep = 1;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 1: {
 
         // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A,or CM121
         std::vector<ChipInfo> unicore = {
             {"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}, {"CM121", "CM121", GNSS_MODEL_CM121}};
         PROBE_FAMILY("Unicore Family", "$PDTINFO", unicore, 500);
-
+        currentDelay = 20;
+        currentStep = 2;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 2: {
         std::vector<ChipInfo> atgm = {
             {"ATGM336H", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H},
             /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS)) based on AT6558 */
             {"ATGM332D", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H}};
         PROBE_FAMILY("ATGM33xx Family", "$PCAS06,1*1A", atgm, 500);
-
+        currentDelay = 20;
+        currentStep = 3;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 3: {
         /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
         _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume
         _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume
@@ -1274,9 +1340,18 @@ GnssModel_t GPS::probe(int serialSpeed)
                                         {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
                                         {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352}};
         PROBE_FAMILY("Airoha Family", "$PAIR021*39", airoha, 1000);
-
+        currentDelay = 20;
+        currentStep = 4;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 4: {
         PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500);
         PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500);
+        currentDelay = 20;
+        currentStep = 5;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 5: {
 
         // Close all NMEA sentences, valid for MTK3333 and MTK3339 platforms
         _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
@@ -1287,7 +1362,11 @@ GnssModel_t GPS::probe(int serialSpeed)
                                      {"L80", "_3339_", GNSS_MODEL_MTK_L76B}};
 
         PROBE_FAMILY("MTK Family", "$PMTK605*31", mtk, 500);
-
+        currentDelay = 20;
+        currentStep = 6;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 6: {
         uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
         UBXChecksum(cfg_rate, sizeof(cfg_rate));
         clearBuffer();
@@ -1296,6 +1375,8 @@ GnssModel_t GPS::probe(int serialSpeed)
         GPS_RESPONSE response = getACK(0x06, 0x08, 750);
         if (response == GNSS_RESPONSE_NONE) {
             LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
+            currentDelay = 2000;
+            currentStep = 0;
             return GNSS_MODEL_UNKNOWN;
         } else if (response == GNSS_RESPONSE_FRAME_ERRORS) {
             LOG_INFO("UBlox Frame Errors (baudrate %d)", serialSpeed);
@@ -1379,7 +1460,11 @@ GnssModel_t GPS::probe(int serialSpeed)
                 return GNSS_MODEL_UBLOX10;
             }
         }
+    }
+    }
     LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
+    currentDelay = 2000;
+    currentStep = 0;
     return GNSS_MODEL_UNKNOWN;
 }
 
@@ -1408,12 +1493,12 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
             }
 
             if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(response);
-#endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
                     if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
+#ifdef GPS_DEBUG
+                        LOG_DEBUG(response);
+#endif
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
                         delete[] response; // Cleanup before return
                         return chipInfo.driver;
@@ -1421,6 +1506,9 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
                 }
             }
             if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(response);
+#endif
                 // Reset the response buffer for the next potential message
                 responseLen = 0;
                 response[0] = '\0';
@@ -1439,10 +1527,7 @@ GPS *GPS::createGps()
     int8_t _rx_gpio = config.position.rx_gpio;
     int8_t _tx_gpio = config.position.tx_gpio;
     int8_t _en_gpio = config.position.gps_en_gpio;
-#if HAS_GPS && !defined(ARCH_ESP32)
-    _rx_gpio = 1; // We only specify GPS serial ports on ESP32. Otherwise, these are just flags.
-    _tx_gpio = 1;
-#endif
+
 #if defined(GPS_RX_PIN)
     if (!_rx_gpio)
         _rx_gpio = GPS_RX_PIN;
@@ -1507,8 +1592,6 @@ GPS *GPS::createGps()
 
 #ifdef PIN_GPS_RESET
     pinMode(PIN_GPS_RESET, OUTPUT);
-    digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
-    delay(10);
     digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
 
@@ -1518,16 +1601,28 @@ GPS *GPS::createGps()
         _serial_gps->setRxBufferSize(SERIAL_BUFFER_SIZE); // the default is 256
 #endif
 
-//  ESP32 has a special set of parameters vs other arduino ports
-#if defined(ARCH_ESP32)
         LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
         LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
+
+//  ESP32 has a special set of parameters vs other arduino ports
+#if defined(ARCH_ESP32)
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
 #elif defined(ARCH_RP2040)
+        _serial_gps->setPinout(new_gps->tx_gpio, new_gps->rx_gpio);
         _serial_gps->setFIFOSize(256);
         _serial_gps->begin(GPS_BAUDRATE);
-#else
+#elif defined(ARCH_NRF52)
+        _serial_gps->setPins(new_gps->rx_gpio, new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE);
+#elif defined(ARCH_STM32WL)
+        _serial_gps->setTx(new_gps->tx_gpio);
+        _serial_gps->setRx(new_gps->rx_gpio);
+        _serial_gps->begin(GPS_BAUDRATE);
+#elif defined(ARCH_PORTDUINO)
+        // Portduino can't set the GPS pins directly.
+        _serial_gps->begin(GPS_BAUDRATE);
+#else
+#error Unsupported architecture!
 #endif
     }
     return new_gps;
@@ -1594,6 +1689,10 @@ bool GPS::lookForLocation()
 
 #ifndef TINYGPS_OPTION_NO_STATISTICS
     if (reader.failedChecksum() > lastChecksumFailCount) {
+// In a GPS_DEBUG build we want to log all of these. In production, we only care if there are many of them.
+#ifndef GPS_DEBUG
+        if (reader.failedChecksum() > 4)
+#endif
             LOG_WARN("%u new GPS checksum failures, for a total of %u", reader.failedChecksum() - lastChecksumFailCount,
                      reader.failedChecksum());
         lastChecksumFailCount = reader.failedChecksum();

src/gps/GPS.h

@@ -16,6 +16,9 @@
 #define GPS_EN_ACTIVE 1
 #endif
 
+static constexpr uint32_t GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS = 10 * 1000UL;
+static constexpr uint32_t GPS_FIX_HOLD_MAX_MS = 20000;
+
 typedef enum {
     GNSS_MODEL_ATGM336H,
     GNSS_MODEL_MTK,
@@ -151,6 +154,8 @@ class GPS : private concurrency::OSThread
     TinyGPSPlus reader;
     uint8_t fixQual = 0; // fix quality from GPGGA
     uint32_t lastChecksumFailCount = 0;
+    uint8_t currentStep = 0;
+    int32_t currentDelay = 2000;
 
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
     // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field
@@ -173,8 +178,6 @@ class GPS : private concurrency::OSThread
      */
     bool hasValidLocation = false; // default to false, until we complete our first read
 
-    bool isInPowersave = false;
-
     bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop()
 
     bool hasGPS = false; // Do we have a GPS we are talking to
@@ -191,6 +194,8 @@ class GPS : private concurrency::OSThread
     /** If !NULL we will use this serial port to construct our GPS */
 #if defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
+#elif defined(ARCH_NRF52)
+    static Uart *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
 #endif

src/gps/RTC.cpp

@@ -109,6 +109,39 @@ RTCSetResult readFromRTC()
         }
         return RTCSetResultSuccess;
     }
+#elif defined(RX8130CE_RTC)
+    if (rtc_found.address == RX8130CE_RTC) {
+        uint32_t now = millis();
+#ifdef MUZI_BASE
+        ArtronShop_RX8130CE rtc(&Wire1);
+#else
+        ArtronShop_RX8130CE rtc(&Wire);
+#endif
+        tm t;
+        if (rtc.getTime(&t)) {
+            tv.tv_sec = gm_mktime(&t);
+            tv.tv_usec = 0;
+
+            uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+            LOG_DEBUG("Read RTC time from RX8130CE getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900,
+                      t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+#ifdef BUILD_EPOCH
+            if (tv.tv_sec < BUILD_EPOCH) {
+                if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
+                    LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+                    lastTimeValidationWarning = millis();
+                }
+                return RTCSetResultInvalidTime;
+            }
+#endif
+            if (currentQuality == RTCQualityNone) {
+                timeStartMsec = now;
+                zeroOffsetSecs = tv.tv_sec;
+                currentQuality = RTCQualityDevice;
+            }
+            return RTCSetResultSuccess;
+        }
+    }
 #else
     if (!gettimeofday(&tv, NULL)) {
         uint32_t now = millis();
@@ -214,6 +247,21 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
             LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
         }
+#elif defined(RX8130CE_RTC)
+        if (rtc_found.address == RX8130CE_RTC) {
+#ifdef MUZI_BASE
+            ArtronShop_RX8130CE rtc(&Wire1);
+#else
+            ArtronShop_RX8130CE rtc(&Wire);
+#endif
+            tm *t = gmtime(&tv->tv_sec);
+            if (rtc.setTime(*t)) {
+                LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,
+                          t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
+            } else {
+                LOG_WARN("Failed to set time for RX8130CE");
+            }
+        }
 #elif defined(ARCH_ESP32)
         settimeofday(tv, NULL);
 #endif
@@ -270,7 +318,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
 #ifdef BUILD_EPOCH
     if (tv.tv_sec < BUILD_EPOCH) {
         if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+            LOG_WARN("Ignore time (%lu) before build epoch (%lu)!", printableEpoch, BUILD_EPOCH);
             lastTimeValidationWarning = millis();
         }
         return RTCSetResultInvalidTime;
@@ -279,7 +327,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
             // Calculate max allowed time safely to avoid overflow in logging
             uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
             uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
+            LOG_WARN("Ignore time (%lu) too far in the future (build epoch: %lu, max allowed: %lu)!", printableEpoch,
                      (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
             lastTimeValidationWarning = millis();
         }

src/gps/RTC.h

@@ -4,6 +4,10 @@
 #include "sys/time.h"
 #include <Arduino.h>
 
+#ifdef RX8130CE_RTC
+#include <ArtronShop_RX8130CE.h>
+#endif
+
 enum RTCQuality {
 
     /// We haven't had our RTC set yet

src/graphics/Panel_sdl.cpp

@@ -0,0 +1,687 @@
+/*----------------------------------------------------------------------------/
+  Lovyan GFX - Graphics library for embedded devices.
+
+Original Source:
+ https://github.com/lovyan03/LovyanGFX/
+
+Licence:
+ [FreeBSD](https://github.com/lovyan03/LovyanGFX/blob/master/license.txt)
+
+Author:
+ [lovyan03](https://twitter.com/lovyan03)
+
+Contributors:
+ [ciniml](https://github.com/ciniml)
+ [mongonta0716](https://github.com/mongonta0716)
+ [tobozo](https://github.com/tobozo)
+
+Porting for SDL:
+ [imliubo](https://github.com/imliubo)
+/----------------------------------------------------------------------------*/
+#include "Panel_sdl.hpp"
+
+#if defined(SDL_h_)
+
+// #include "../common.hpp"
+// #include "../../misc/common_function.hpp"
+// #include "../../Bus.hpp"
+
+#include <list>
+#include <math.h>
+#include <vector>
+#ifndef M_PI
+#define M_PI 3.14159265358979323846
+#endif
+
+namespace lgfx
+{
+inline namespace v1
+{
+SDL_Keymod Panel_sdl::_keymod = KMOD_NONE;
+static SDL_semaphore *_update_in_semaphore = nullptr;
+static SDL_semaphore *_update_out_semaphore = nullptr;
+volatile static uint32_t _in_step_exec = 0;
+volatile static uint32_t _msec_step_exec = 512;
+static bool _inited = false;
+static bool _all_close = false;
+
+volatile uint8_t Panel_sdl::_gpio_dummy_values[EMULATED_GPIO_MAX];
+
+static inline void *heap_alloc_dma(size_t length)
+{
+    return malloc(length);
+} // aligned_alloc(16, length);
+static inline void heap_free(void *buf)
+{
+    free(buf);
+}
+
+static std::list<monitor_t *> _list_monitor;
+
+static monitor_t *const getMonitorByWindowID(uint32_t windowID)
+{
+    for (auto &m : _list_monitor) {
+        if (SDL_GetWindowID(m->window) == windowID) {
+            return m;
+        }
+    }
+    return nullptr;
+}
+//----------------------------------------------------------------------------
+
+static std::vector<Panel_sdl::KeyCodeMapping_t> _key_code_map;
+
+void Panel_sdl::addKeyCodeMapping(SDL_KeyCode keyCode, uint8_t gpio)
+{
+    if (gpio > EMULATED_GPIO_MAX)
+        return;
+    KeyCodeMapping_t map;
+    map.keycode = keyCode;
+    map.gpio = gpio;
+    _key_code_map.push_back(map);
+}
+
+int Panel_sdl::getKeyCodeMapping(SDL_KeyCode keyCode)
+{
+    for (const auto &i : _key_code_map) {
+        if (i.keycode == keyCode)
+            return i.gpio;
+    }
+    return -1;
+}
+
+void Panel_sdl::_event_proc(void)
+{
+    SDL_Event event;
+    while (SDL_PollEvent(&event)) {
+        if ((event.type == SDL_KEYDOWN) || (event.type == SDL_KEYUP)) {
+            auto mon = getMonitorByWindowID(event.button.windowID);
+            int gpio = -1;
+
+            /// Check key mapping
+            gpio = getKeyCodeMapping((SDL_KeyCode)event.key.keysym.sym);
+            if (gpio < 0) {
+                switch (event.key.keysym.sym) { /// M5StackのBtnA～BtnCのエミュレート;
+                // case SDLK_LEFT:  gpio = 39; break;
+                // case SDLK_DOWN:  gpio = 38; break;
+                // case SDLK_RIGHT: gpio = 37; break;
+                // case SDLK_UP:    gpio = 36; break;
+
+                /// L/Rキーで画面回転
+                case SDLK_r:
+                case SDLK_l:
+                    if (event.type == SDL_KEYDOWN && event.key.keysym.mod == _keymod) {
+                        if (mon != nullptr) {
+                            mon->frame_rotation = (mon->frame_rotation += event.key.keysym.sym == SDLK_r ? 1 : -1);
+                            int x, y, w, h;
+                            SDL_GetWindowSize(mon->window, &w, &h);
+                            SDL_GetWindowPosition(mon->window, &x, &y);
+                            SDL_SetWindowSize(mon->window, h, w);
+                            SDL_SetWindowPosition(mon->window, x + (w - h) / 2, y + (h - w) / 2);
+                            mon->panel->sdl_invalidate();
+                        }
+                    }
+                    break;
+
+                /// 1～6キーで画面拡大率変更
+                case SDLK_1:
+                case SDLK_2:
+                case SDLK_3:
+                case SDLK_4:
+                case SDLK_5:
+                case SDLK_6:
+                    if (event.type == SDL_KEYDOWN && event.key.keysym.mod == _keymod) {
+                        if (mon != nullptr) {
+                            int size = 1 + (event.key.keysym.sym - SDLK_1);
+                            _update_scaling(mon, size, size);
+                        }
+                    }
+                    break;
+                default:
+                    continue;
+                }
+            }
+
+            if (event.type == SDL_KEYDOWN) {
+                Panel_sdl::gpio_lo(gpio);
+            } else {
+                Panel_sdl::gpio_hi(gpio);
+            }
+        } else if (event.type == SDL_MOUSEBUTTONDOWN || event.type == SDL_MOUSEBUTTONUP || event.type == SDL_MOUSEMOTION) {
+            auto mon = getMonitorByWindowID(event.button.windowID);
+            if (mon != nullptr) {
+                {
+                    int x, y, w, h;
+                    SDL_GetWindowSize(mon->window, &w, &h);
+                    SDL_GetMouseState(&x, &y);
+                    float sf = sinf(mon->frame_angle * M_PI / 180);
+                    float cf = cosf(mon->frame_angle * M_PI / 180);
+                    x -= w / 2.0f;
+                    y -= h / 2.0f;
+                    float nx = y * sf + x * cf;
+                    float ny = y * cf - x * sf;
+                    if (mon->frame_rotation & 1) {
+                        std::swap(w, h);
+                    }
+                    x = (nx * mon->frame_width / w) + (mon->frame_width >> 1);
+                    y = (ny * mon->frame_height / h) + (mon->frame_height >> 1);
+                    mon->touch_x = x - mon->frame_inner_x;
+                    mon->touch_y = y - mon->frame_inner_y;
+                }
+                if (event.type == SDL_MOUSEBUTTONDOWN && event.button.button == SDL_BUTTON_LEFT) {
+                    mon->touched = true;
+                }
+                if (event.type == SDL_MOUSEBUTTONUP && event.button.button == SDL_BUTTON_LEFT) {
+                    mon->touched = false;
+                }
+            }
+        } else if (event.type == SDL_WINDOWEVENT) {
+            auto monitor = getMonitorByWindowID(event.window.windowID);
+            if (monitor) {
+                if (event.window.event == SDL_WINDOWEVENT_RESIZED) {
+                    int mw, mh;
+                    SDL_GetRendererOutputSize(monitor->renderer, &mw, &mh);
+                    if (monitor->frame_rotation & 1) {
+                        std::swap(mw, mh);
+                    }
+                    monitor->scaling_x = (mw * 2 / monitor->frame_width) / 2.0f;
+                    monitor->scaling_y = (mh * 2 / monitor->frame_height) / 2.0f;
+                    monitor->panel->sdl_invalidate();
+                } else if (event.window.event == SDL_WINDOWEVENT_CLOSE) {
+                    monitor->closing = true;
+                }
+            }
+        } else if (event.type == SDL_QUIT) {
+            for (auto &m : _list_monitor) {
+                m->closing = true;
+            }
+        }
+    }
+}
+
+/// デバッガでステップ実行されていることを検出するスレッド用関数。
+static int detectDebugger(bool *running)
+{
+    uint32_t prev_ms = SDL_GetTicks();
+    do {
+        SDL_Delay(1);
+        uint32_t ms = SDL_GetTicks();
+        /// 時間間隔が広すぎる場合はステップ実行中 (ブレークポイントで止まった)と判断する。
+        /// また、解除されたと判断した後も1023msecほど状態を維持する。
+        if (ms - prev_ms > 64) {
+            _in_step_exec = _msec_step_exec;
+        } else if (_in_step_exec) {
+            --_in_step_exec;
+        }
+        prev_ms = ms;
+    } while (*running);
+    return 0;
+}
+
+void Panel_sdl::_update_proc(void)
+{
+    for (auto it = _list_monitor.begin(); it != _list_monitor.end();) {
+        if ((*it)->closing) {
+            if ((*it)->texture_frameimage) {
+                SDL_DestroyTexture((*it)->texture_frameimage);
+            }
+            SDL_DestroyTexture((*it)->texture);
+            SDL_DestroyRenderer((*it)->renderer);
+            SDL_DestroyWindow((*it)->window);
+            _list_monitor.erase(it++);
+            if (_list_monitor.empty()) {
+                _all_close = true;
+                return;
+            }
+            continue;
+        }
+        (*it)->panel->sdl_update();
+        ++it;
+    }
+}
+
+int Panel_sdl::setup(void)
+{
+    if (_inited)
+        return 1;
+    _inited = true;
+
+    /// Add default keycode mapping
+    /// M5StackのBtnA～BtnCのエミュレート;
+    addKeyCodeMapping(SDLK_LEFT, 39);
+    addKeyCodeMapping(SDLK_DOWN, 38);
+    addKeyCodeMapping(SDLK_RIGHT, 37);
+    addKeyCodeMapping(SDLK_UP, 36);
+
+    SDL_CreateThread((SDL_ThreadFunction)detectDebugger, "dbg", &_inited);
+
+    _update_in_semaphore = SDL_CreateSemaphore(0);
+    _update_out_semaphore = SDL_CreateSemaphore(0);
+    for (size_t pin = 0; pin < EMULATED_GPIO_MAX; ++pin) {
+        gpio_hi(pin);
+    }
+    /*Initialize the SDL*/
+    SDL_Init(SDL_INIT_VIDEO);
+    SDL_StartTextInput();
+
+    // SDL_SetThreadPriority(SDL_ThreadPriority::SDL_THREAD_PRIORITY_HIGH);
+    return 0;
+}
+
+int Panel_sdl::loop(void)
+{
+    if (!_inited)
+        return 1;
+
+    _event_proc();
+    SDL_SemWaitTimeout(_update_in_semaphore, 1);
+    _update_proc();
+    _event_proc();
+    if (SDL_SemValue(_update_out_semaphore) == 0) {
+        SDL_SemPost(_update_out_semaphore);
+    }
+
+    return _all_close;
+}
+
+int Panel_sdl::close(void)
+{
+    if (!_inited)
+        return 1;
+    _inited = false;
+
+    SDL_StopTextInput();
+    SDL_DestroySemaphore(_update_in_semaphore);
+    SDL_DestroySemaphore(_update_out_semaphore);
+    SDL_Quit();
+    return 0;
+}
+
+int Panel_sdl::main(int (*fn)(bool *), uint32_t msec_step_exec)
+{
+    _msec_step_exec = msec_step_exec;
+
+    /// SDLの準備
+    if (0 != Panel_sdl::setup()) {
+        return 1;
+    }
+
+    /// ユーザコード関数の動作・停止フラグ
+    bool running = true;
+
+    /// ユーザコード関数を起動する
+    auto thread = SDL_CreateThread((SDL_ThreadFunction)fn, "fn", &running);
+
+    /// 全部のウィンドウが閉じられるまでSDLのイベント・描画処理を継続
+    while (0 == Panel_sdl::loop()) {
+    };
+
+    /// ユーザコード関数を終了する
+    running = false;
+    SDL_WaitThread(thread, nullptr);
+
+    /// SDLを終了する
+    return Panel_sdl::close();
+}
+
+void Panel_sdl::setScaling(uint_fast8_t scaling_x, uint_fast8_t scaling_y)
+{
+    monitor.scaling_x = scaling_x;
+    monitor.scaling_y = scaling_y;
+}
+
+void Panel_sdl::setFrameImage(const void *frame_image, int frame_width, int frame_height, int inner_x, int inner_y)
+{
+    monitor.frame_image = frame_image;
+    monitor.frame_width = frame_width;
+    monitor.frame_height = frame_height;
+    monitor.frame_inner_x = inner_x;
+    monitor.frame_inner_y = inner_y;
+}
+
+void Panel_sdl::setFrameRotation(uint_fast16_t frame_rotation)
+{
+    monitor.frame_rotation = frame_rotation;
+    monitor.frame_angle = (monitor.frame_rotation) * 90;
+}
+
+Panel_sdl::~Panel_sdl(void)
+{
+    _list_monitor.remove(&monitor);
+    SDL_DestroyMutex(_sdl_mutex);
+}
+
+Panel_sdl::Panel_sdl(void) : Panel_FrameBufferBase()
+{
+    _sdl_mutex = SDL_CreateMutex();
+    _auto_display = true;
+    monitor.panel = this;
+}
+
+bool Panel_sdl::init(bool use_reset)
+{
+    initFrameBuffer(_cfg.panel_width * 4, _cfg.panel_height);
+    bool res = Panel_FrameBufferBase::init(use_reset);
+
+    _list_monitor.push_back(&monitor);
+
+    return res;
+}
+
+color_depth_t Panel_sdl::setColorDepth(color_depth_t depth)
+{
+    auto bits = depth & color_depth_t::bit_mask;
+    if (bits >= 16) {
+        depth = (bits > 16) ? rgb888_3Byte : rgb565_2Byte;
+    } else {
+        depth = (depth == color_depth_t::grayscale_8bit) ? grayscale_8bit : rgb332_1Byte;
+    }
+    _write_depth = depth;
+    _read_depth = depth;
+
+    return depth;
+}
+
+Panel_sdl::lock_t::lock_t(Panel_sdl *parent) : _parent{parent}
+{
+    SDL_LockMutex(parent->_sdl_mutex);
+};
+
+Panel_sdl::lock_t::~lock_t(void)
+{
+    ++_parent->_modified_counter;
+    SDL_UnlockMutex(_parent->_sdl_mutex);
+    if (SDL_SemValue(_update_in_semaphore) < 2) {
+        SDL_SemPost(_update_in_semaphore);
+        if (!_in_step_exec) {
+            SDL_SemWaitTimeout(_update_out_semaphore, 1);
+        }
+    }
+};
+
+void Panel_sdl::drawPixelPreclipped(uint_fast16_t x, uint_fast16_t y, uint32_t rawcolor)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::drawPixelPreclipped(x, y, rawcolor);
+}
+
+void Panel_sdl::writeFillRectPreclipped(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, uint32_t rawcolor)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::writeFillRectPreclipped(x, y, w, h, rawcolor);
+}
+
+void Panel_sdl::writeBlock(uint32_t rawcolor, uint32_t length)
+{
+    //    lock_t lock(this);
+    Panel_FrameBufferBase::writeBlock(rawcolor, length);
+}
+
+void Panel_sdl::writeImage(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, pixelcopy_t *param, bool use_dma)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::writeImage(x, y, w, h, param, use_dma);
+}
+
+void Panel_sdl::writeImageARGB(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, pixelcopy_t *param)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::writeImageARGB(x, y, w, h, param);
+}
+
+void Panel_sdl::writePixels(pixelcopy_t *param, uint32_t len, bool use_dma)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::writePixels(param, len, use_dma);
+}
+
+void Panel_sdl::display(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h)
+{
+    (void)x;
+    (void)y;
+    (void)w;
+    (void)h;
+    if (_in_step_exec) {
+        if (_display_counter != _modified_counter) {
+            do {
+                SDL_SemPost(_update_in_semaphore);
+                SDL_SemWaitTimeout(_update_out_semaphore, 1);
+            } while (_display_counter != _modified_counter);
+            SDL_Delay(1);
+        }
+    }
+}
+
+uint_fast8_t Panel_sdl::getTouchRaw(touch_point_t *tp, uint_fast8_t count)
+{
+    (void)count;
+    tp->x = monitor.touch_x;
+    tp->y = monitor.touch_y;
+    tp->size = monitor.touched ? 1 : 0;
+    tp->id = 0;
+    return monitor.touched;
+}
+
+void Panel_sdl::setWindowTitle(const char *title)
+{
+    _window_title = title;
+    if (monitor.window) {
+        SDL_SetWindowTitle(monitor.window, _window_title);
+    }
+}
+
+void Panel_sdl::_update_scaling(monitor_t *mon, float sx, float sy)
+{
+    mon->scaling_x = sx;
+    mon->scaling_y = sy;
+    int nw = mon->frame_width;
+    int nh = mon->frame_height;
+    if (mon->frame_rotation & 1) {
+        std::swap(nw, nh);
+    }
+
+    int x, y, w, h;
+    int rw, rh;
+    SDL_GetRendererOutputSize(mon->renderer, &rw, &rh);
+    SDL_GetWindowSize(mon->window, &w, &h);
+    nw = nw * sx * w / rw;
+    nh = nh * sy * h / rh;
+    SDL_GetWindowPosition(mon->window, &x, &y);
+    SDL_SetWindowSize(mon->window, nw, nh);
+    SDL_SetWindowPosition(mon->window, x + (w - nw) / 2, y + (h - nh) / 2);
+    mon->panel->sdl_invalidate();
+}
+
+void Panel_sdl::sdl_create(monitor_t *m)
+{
+    int flag = SDL_WINDOW_RESIZABLE | SDL_WINDOW_ALLOW_HIGHDPI;
+#if SDL_FULLSCREEN
+    flag |= SDL_WINDOW_FULLSCREEN;
+#endif
+
+    if (m->frame_width < _cfg.panel_width) {
+        m->frame_width = _cfg.panel_width;
+    }
+    if (m->frame_height < _cfg.panel_height) {
+        m->frame_height = _cfg.panel_height;
+    }
+
+    int window_width = m->frame_width * m->scaling_x;
+    int window_height = m->frame_height * m->scaling_y;
+    int scaling_x = m->scaling_x;
+    int scaling_y = m->scaling_y;
+    if (m->frame_rotation & 1) {
+        std::swap(window_width, window_height);
+        std::swap(scaling_x, scaling_y);
+    }
+
+    {
+        m->window = SDL_CreateWindow(_window_title, SDL_WINDOWPOS_UNDEFINED, SDL_WINDOWPOS_UNDEFINED, window_width, window_height,
+                                     flag); /*last param. SDL_WINDOW_BORDERLESS to hide borders*/
+    }
+    m->renderer = SDL_CreateRenderer(m->window, -1, SDL_RENDERER_ACCELERATED | SDL_RENDERER_PRESENTVSYNC);
+    m->texture =
+        SDL_CreateTexture(m->renderer, SDL_PIXELFORMAT_RGB24, SDL_TEXTUREACCESS_STREAMING, _cfg.panel_width, _cfg.panel_height);
+    SDL_SetTextureBlendMode(m->texture, SDL_BLENDMODE_NONE);
+
+    if (m->frame_image) {
+        // 枠画像用のサーフェイスを作成
+        auto sf = SDL_CreateRGBSurfaceFrom((void *)m->frame_image, m->frame_width, m->frame_height, 32, m->frame_width * 4,
+                                           0xFF000000, 0xFF0000, 0xFF00, 0xFF);
+        if (sf != nullptr) {
+            // 枠画像からテクスチャを作成
+            m->texture_frameimage = SDL_CreateTextureFromSurface(m->renderer, sf);
+            SDL_FreeSurface(sf);
+        }
+    }
+    SDL_SetTextureBlendMode(m->texture_frameimage, SDL_BLENDMODE_BLEND);
+    _update_scaling(m, scaling_x, scaling_y);
+}
+
+void Panel_sdl::sdl_update(void)
+{
+    if (monitor.renderer == nullptr) {
+        sdl_create(&monitor);
+    }
+
+    bool step_exec = _in_step_exec;
+
+    if (_texupdate_counter != _modified_counter) {
+        pixelcopy_t pc(nullptr, color_depth_t::rgb888_3Byte, _write_depth, false);
+        if (_write_depth == rgb565_2Byte) {
+            pc.fp_copy = pixelcopy_t::copy_rgb_fast<bgr888_t, swap565_t>;
+        } else if (_write_depth == rgb888_3Byte) {
+            pc.fp_copy = pixelcopy_t::copy_rgb_fast<bgr888_t, bgr888_t>;
+        } else if (_write_depth == rgb332_1Byte) {
+            pc.fp_copy = pixelcopy_t::copy_rgb_fast<bgr888_t, rgb332_t>;
+        } else if (_write_depth == grayscale_8bit) {
+            pc.fp_copy = pixelcopy_t::copy_rgb_fast<bgr888_t, grayscale_t>;
+        }
+
+        if (0 == SDL_LockMutex(_sdl_mutex)) {
+            _texupdate_counter = _modified_counter;
+            for (int y = 0; y < _cfg.panel_height; ++y) {
+                pc.src_x32 = 0;
+                pc.src_data = _lines_buffer[y];
+                pc.fp_copy(&_texturebuf[y * _cfg.panel_width], 0, _cfg.panel_width, &pc);
+            }
+            SDL_UnlockMutex(_sdl_mutex);
+            SDL_UpdateTexture(monitor.texture, nullptr, _texturebuf, _cfg.panel_width * sizeof(rgb888_t));
+        }
+    }
+
+    int angle = monitor.frame_angle;
+    int target = (monitor.frame_rotation) * 90;
+    angle = (((target * 4) + (angle * 4) + (angle < target ? 8 : 0)) >> 3);
+
+    if (monitor.frame_angle != angle) { // 表示する向きを変える
+        monitor.frame_angle = angle;
+        sdl_invalidate();
+    } else if (monitor.frame_rotation & ~3u) {
+        monitor.frame_rotation &= 3;
+        monitor.frame_angle = (monitor.frame_rotation) * 90;
+        sdl_invalidate();
+    }
+
+    if (_invalidated || (_display_counter != _texupdate_counter)) {
+        SDL_RendererInfo info;
+        if (0 == SDL_GetRendererInfo(monitor.renderer, &info)) {
+            // ステップ実行中はVSYNCを待機しない
+            if (((bool)(info.flags & SDL_RENDERER_PRESENTVSYNC)) == step_exec) {
+                SDL_RenderSetVSync(monitor.renderer, !step_exec);
+            }
+        }
+        {
+            int red = 0;
+            int green = 0;
+            int blue = 0;
+#if defined(M5GFX_BACK_COLOR)
+            red = ((M5GFX_BACK_COLOR) >> 16) & 0xFF;
+            green = ((M5GFX_BACK_COLOR) >> 8) & 0xFF;
+            blue = ((M5GFX_BACK_COLOR)) & 0xFF;
+#endif
+            SDL_SetRenderDrawColor(monitor.renderer, red, green, blue, 0xFF);
+        }
+        SDL_RenderClear(monitor.renderer);
+        if (_invalidated) {
+            _invalidated = false;
+            int mw, mh;
+            SDL_GetRendererOutputSize(monitor.renderer, &mw, &mh);
+        }
+        render_texture(monitor.texture, monitor.frame_inner_x, monitor.frame_inner_y, _cfg.panel_width, _cfg.panel_height, angle);
+        render_texture(monitor.texture_frameimage, 0, 0, monitor.frame_width, monitor.frame_height, angle);
+        SDL_RenderPresent(monitor.renderer);
+        _display_counter = _texupdate_counter;
+        if (_invalidated) {
+            _invalidated = false;
+            SDL_SetRenderDrawColor(monitor.renderer, 0, 0, 0, 0xFF);
+            SDL_RenderClear(monitor.renderer);
+            render_texture(monitor.texture, monitor.frame_inner_x, monitor.frame_inner_y, _cfg.panel_width, _cfg.panel_height,
+                           angle);
+            render_texture(monitor.texture_frameimage, 0, 0, monitor.frame_width, monitor.frame_height, angle);
+            SDL_RenderPresent(monitor.renderer);
+        }
+    }
+}
+
+void Panel_sdl::render_texture(SDL_Texture *texture, int tx, int ty, int tw, int th, float angle)
+{
+    SDL_Point pivot;
+    pivot.x = (monitor.frame_width / 2.0f - tx) * (float)monitor.scaling_x;
+    pivot.y = (monitor.frame_height / 2.0f - ty) * (float)monitor.scaling_y;
+    SDL_Rect dstrect;
+    dstrect.w = tw * monitor.scaling_x;
+    dstrect.h = th * monitor.scaling_y;
+    int mw, mh;
+    SDL_GetRendererOutputSize(monitor.renderer, &mw, &mh);
+    dstrect.x = mw / 2.0f - pivot.x;
+    dstrect.y = mh / 2.0f - pivot.y;
+    SDL_RenderCopyEx(monitor.renderer, texture, nullptr, &dstrect, angle, &pivot, SDL_RendererFlip::SDL_FLIP_NONE);
+}
+
+bool Panel_sdl::initFrameBuffer(size_t width, size_t height)
+{
+    uint8_t **lineArray = (uint8_t **)heap_alloc_dma(height * sizeof(uint8_t *));
+    if (nullptr == lineArray) {
+        return false;
+    }
+
+    _texturebuf = (rgb888_t *)heap_alloc_dma(width * height * sizeof(rgb888_t));
+
+    /// 8byte alignment;
+    width = (width + 7) & ~7u;
+
+    _lines_buffer = lineArray;
+    memset(lineArray, 0, height * sizeof(uint8_t *));
+
+    uint8_t *framebuffer = (uint8_t *)heap_alloc_dma(width * height + 16);
+
+    auto fb = framebuffer;
+    {
+        for (size_t y = 0; y < height; ++y) {
+            lineArray[y] = fb;
+            fb += width;
+        }
+    }
+    return true;
+}
+
+void Panel_sdl::deinitFrameBuffer(void)
+{
+    auto lines = _lines_buffer;
+    _lines_buffer = nullptr;
+    if (lines != nullptr) {
+        heap_free(lines[0]);
+        heap_free(lines);
+    }
+    if (_texturebuf) {
+        heap_free(_texturebuf);
+        _texturebuf = nullptr;
+    }
+}
+
+//----------------------------------------------------------------------------
+} // namespace v1
+} // namespace lgfx
+
+#endif

src/graphics/Panel_sdl.hpp

@@ -0,0 +1,166 @@
+/*----------------------------------------------------------------------------/
+  Lovyan GFX - Graphics library for embedded devices.
+
+Original Source:
+ https://github.com/lovyan03/LovyanGFX/
+
+Licence:
+ [FreeBSD](https://github.com/lovyan03/LovyanGFX/blob/master/license.txt)
+
+Author:
+ [lovyan03](https://twitter.com/lovyan03)
+
+Contributors:
+ [ciniml](https://github.com/ciniml)
+ [mongonta0716](https://github.com/mongonta0716)
+ [tobozo](https://github.com/tobozo)
+
+Porting for SDL:
+ [imliubo](https://github.com/imliubo)
+/----------------------------------------------------------------------------*/
+#pragma once
+
+#define SDL_MAIN_HANDLED
+// cppcheck-suppress preprocessorErrorDirective
+#if __has_include(<SDL2/SDL.h>)
+#include <SDL2/SDL.h>
+#include <SDL2/SDL_main.h>
+#elif __has_include(<SDL.h>)
+#include <SDL.h>
+#include <SDL_main.h>
+#endif
+
+#if defined(SDL_h_)
+#include "lgfx/v1/Touch.hpp"
+#include "lgfx/v1/misc/range.hpp"
+#include "lgfx/v1/panel/Panel_FrameBufferBase.hpp"
+#include <cstdint>
+
+namespace lgfx
+{
+inline namespace v1
+{
+
+struct Panel_sdl;
+struct monitor_t {
+    SDL_Window *window = nullptr;
+    SDL_Renderer *renderer = nullptr;
+    SDL_Texture *texture = nullptr;
+    SDL_Texture *texture_frameimage = nullptr;
+    Panel_sdl *panel = nullptr;
+
+    // 外枠
+    const void *frame_image = 0;
+    uint_fast16_t frame_width = 0;
+    uint_fast16_t frame_height = 0;
+    uint_fast16_t frame_inner_x = 0;
+    uint_fast16_t frame_inner_y = 0;
+    int_fast16_t frame_rotation = 0;
+    int_fast16_t frame_angle = 0;
+
+    float scaling_x = 1;
+    float scaling_y = 1;
+    int_fast16_t touch_x, touch_y;
+    bool touched = false;
+    bool closing = false;
+};
+//----------------------------------------------------------------------------
+
+struct Touch_sdl : public ITouch {
+    bool init(void) override { return true; }
+    void wakeup(void) override {}
+    void sleep(void) override {}
+    bool isEnable(void) override { return true; };
+    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override { return 0; }
+};
+
+//----------------------------------------------------------------------------
+
+struct Panel_sdl : public Panel_FrameBufferBase {
+    static constexpr size_t EMULATED_GPIO_MAX = 128;
+    static volatile uint8_t _gpio_dummy_values[EMULATED_GPIO_MAX];
+
+  public:
+    Panel_sdl(void);
+    virtual ~Panel_sdl(void);
+
+    bool init(bool use_reset) override;
+
+    color_depth_t setColorDepth(color_depth_t depth) override;
+
+    void display(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h) override;
+
+    // void setInvert(bool invert) override {}
+    void drawPixelPreclipped(uint_fast16_t x, uint_fast16_t y, uint32_t rawcolor) override;
+    void writeFillRectPreclipped(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, uint32_t rawcolor) override;
+    void writeBlock(uint32_t rawcolor, uint32_t length) override;
+    void writeImage(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, pixelcopy_t *param,
+                    bool use_dma) override;
+    void writeImageARGB(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, pixelcopy_t *param) override;
+    void writePixels(pixelcopy_t *param, uint32_t len, bool use_dma) override;
+
+    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override;
+
+    void setWindowTitle(const char *title);
+    void setScaling(uint_fast8_t scaling_x, uint_fast8_t scaling_y);
+    void setFrameImage(const void *frame_image, int frame_width, int frame_height, int inner_x, int inner_y);
+    void setFrameRotation(uint_fast16_t frame_rotaion);
+    void setBrightness(uint8_t brightness) override{};
+
+    static volatile void gpio_hi(uint32_t pin) { _gpio_dummy_values[pin & (EMULATED_GPIO_MAX - 1)] = 1; }
+    static volatile void gpio_lo(uint32_t pin) { _gpio_dummy_values[pin & (EMULATED_GPIO_MAX - 1)] = 0; }
+    static volatile bool gpio_in(uint32_t pin) { return _gpio_dummy_values[pin & (EMULATED_GPIO_MAX - 1)]; }
+
+    static int setup(void);
+    static int loop(void);
+    static int close(void);
+
+    static int main(int (*fn)(bool *), uint32_t msec_step_exec = 512);
+
+    static void setShortcutKeymod(SDL_Keymod keymod) { _keymod = keymod; }
+
+    struct KeyCodeMapping_t {
+        SDL_KeyCode keycode = SDLK_UNKNOWN;
+        uint8_t gpio = 0;
+    };
+    static void addKeyCodeMapping(SDL_KeyCode keyCode, uint8_t gpio);
+    static int getKeyCodeMapping(SDL_KeyCode keyCode);
+
+  protected:
+    const char *_window_title = "LGFX Simulator";
+    SDL_mutex *_sdl_mutex = nullptr;
+
+    void sdl_create(monitor_t *m);
+    void sdl_update(void);
+
+    touch_point_t _touch_point;
+    monitor_t monitor;
+
+    rgb888_t *_texturebuf = nullptr;
+    uint_fast16_t _modified_counter;
+    uint_fast16_t _texupdate_counter;
+    uint_fast16_t _display_counter;
+    bool _invalidated;
+
+    static void _event_proc(void);
+    static void _update_proc(void);
+    static void _update_scaling(monitor_t *m, float sx, float sy);
+    void sdl_invalidate(void) { _invalidated = true; }
+    void render_texture(SDL_Texture *texture, int tx, int ty, int tw, int th, float angle);
+    bool initFrameBuffer(size_t width, size_t height);
+    void deinitFrameBuffer(void);
+
+    static SDL_Keymod _keymod;
+
+    struct lock_t {
+        lock_t(Panel_sdl *parent);
+        ~lock_t();
+
+      protected:
+        Panel_sdl *_parent;
+    };
+};
+//----------------------------------------------------------------------------
+} // namespace v1
+} // namespace lgfx
+#endif

src/graphics/Screen.cpp

@@ -100,7 +100,7 @@ namespace graphics
 #define NUM_EXTRA_FRAMES 3 // text message and debug frame
 // if defined a pixel will blink to show redraws
 // #define SHOW_REDRAWS
-
+#define ASCII_BELL '\x07'
 // A text message frame + debug frame + all the node infos
 FrameCallback *normalFrames;
 static uint32_t targetFramerate = IDLE_FRAMERATE;
@@ -435,6 +435,14 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
 
+#if defined(MUZI_BASE)
+            dispdev->init();
+            dispdev->setBrightness(brightness);
+            dispdev->flipScreenVertically();
+            dispdev->resetDisplay();
+            digitalWrite(SCREEN_12V_ENABLE, HIGH);
+            delay(100);
+#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -443,7 +451,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             if (uiconfig.screen_brightness == 1)
                 digitalWrite(PIN_EINK_EN, HIGH);
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1)
+            if (uiconfig.screen_brightness > 0)
                 io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
 #endif
 
@@ -453,7 +461,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOn();
-#ifdef HELTEC_TRACKER_V1_X
+#if defined(HELTEC_TRACKER_V1_X) || defined(HELTEC_WIRELESS_TRACKER_V2)
             ui->init();
 #endif
 #ifdef USE_ST7789
@@ -484,6 +492,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOff();
+
+#ifdef SCREEN_12V_ENABLE
+            digitalWrite(SCREEN_12V_ENABLE, LOW);
+#endif
 #ifdef USE_ST7789
             SPI1.end();
 #if defined(ARCH_ESP32)
@@ -534,7 +546,7 @@ void Screen::setup()
         static_cast<AutoOLEDWire *>(dispdev)->setDetected(model);
 #endif
 
-#ifdef USE_SH1107_128_64
+#if defined(USE_SH1107_128_64) || defined(USE_SH1107)
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
@@ -542,6 +554,9 @@ void Screen::setup()
     // Apply custom RGB color (e.g. Heltec T114/T190)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #endif
+#if defined(MUZI_BASE)
+    dispdev->delayPoweron = true;
+#endif
 
     // === Initialize display and UI system ===
     ui->init();
@@ -1428,6 +1443,9 @@ int Screen::handleStatusUpdate(const meshtastic::Status *arg)
         }
         nodeDB->updateGUI = false;
         break;
+    case STATUS_TYPE_POWER:
+        forceDisplay(true);
+        break;
     }
 
     return 0;
@@ -1458,28 +1476,36 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             }
             // === Prepare banner content ===
             const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
+            const meshtastic_Channel channel =
+                channels.getByIndex(packet->channel ? packet->channel : channels.getPrimaryIndex());
             const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;
 
             const char *msgRaw = reinterpret_cast<const char *>(packet->decoded.payload.bytes);
 
             char banner[256];
 
-            // Check for bell character in message to determine alert type
             bool isAlert = false;
+
+            if (moduleConfig.external_notification.alert_bell || moduleConfig.external_notification.alert_bell_vibra ||
+                moduleConfig.external_notification.alert_bell_buzzer)
+                // Check for bell character to determine if this message is an alert
                 for (size_t i = 0; i < packet->decoded.payload.size && i < 100; i++) {
-                if (msgRaw[i] == '\x07') {
+                    if (msgRaw[i] == ASCII_BELL) {
                         isAlert = true;
                         break;
                     }
                 }
 
+            // Unlike generic messages, alerts (when enabled via the ext notif module) ignore any
+            // 'mute' preferences set to any specific node or channel.
             if (isAlert) {
                 if (longName && longName[0]) {
                     snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
                 } else {
                     strcpy(banner, "Alert Received");
                 }
-            } else {
+                screen->showSimpleBanner(banner, 3000);
+            } else if (!channel.settings.has_module_settings || !channel.settings.module_settings.is_muted) {
                 if (longName && longName[0]) {
 #if defined(M5STACK_UNITC6L)
                     strcpy(banner, "New Message");
@@ -1490,16 +1516,23 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
                 } else {
                     strcpy(banner, "New Message");
                 }
-            }
 #if defined(M5STACK_UNITC6L)
                 screen->setOn(true);
                 screen->showSimpleBanner(banner, 1500);
+                if (config.device.buzzer_mode != meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY ||
+                    (isAlert && moduleConfig.external_notification.alert_bell_buzzer) ||
+                    (!isBroadcast(packet->to) && isToUs(packet))) {
+                    // Beep if not in DIRECT_MSG_ONLY mode or if in DIRECT_MSG_ONLY mode and either
+                    // - packet contains an alert and alert bell buzzer is enabled
+                    // - packet is a non-broadcast that is addressed to this node
                     playLongBeep();
+                }
 #else
                 screen->showSimpleBanner(banner, 3000);
 #endif
             }
         }
+    }
 
     return 0;
 }

src/graphics/Screen.h

@@ -249,6 +249,8 @@ class Screen : public concurrency::OSThread
 
     bool isOverlayBannerShowing();
 
+    bool isScreenOn() { return screenOn; }
+
     // Stores the last 4 of our hardware ID, to make finding the device for pairing easier
     // FIXME: Needs refactoring and getMacAddr needs to be moved to a utility class
     char ourId[5];

src/graphics/SharedUIDisplay.cpp

@@ -1,6 +1,10 @@
-#include "graphics/SharedUIDisplay.h"
+#include "configuration.h"
+#if HAS_SCREEN
+#include "MeshService.h"
 #include "RTC.h"
+#include "draw/NodeListRenderer.h"
 #include "graphics/ScreenFonts.h"
+#include "graphics/SharedUIDisplay.h"
 #include "graphics/draw/UIRenderer.h"
 #include "main.h"
 #include "meshtastic/config.pb.h"
@@ -396,6 +400,43 @@ const int *getTextPositions(OLEDDisplay *display)
     return textPositions;
 }
 
+// *************************
+// * Common Footer Drawing *
+// *************************
+void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y)
+{
+    bool drawConnectionState = false;
+    if (service->api_state == service->STATE_BLE || service->api_state == service->STATE_WIFI ||
+        service->api_state == service->STATE_SERIAL || service->api_state == service->STATE_PACKET ||
+        service->api_state == service->STATE_HTTP || service->api_state == service->STATE_ETH) {
+        drawConnectionState = true;
+    }
+
+    if (drawConnectionState) {
+        if (isHighResolution) {
+            const int scale = 2;
+            const int bytesPerRow = (connection_icon_width + 7) / 8;
+            int iconX = 0;
+            int iconY = SCREEN_HEIGHT - (connection_icon_height * 2);
+
+            for (int yy = 0; yy < connection_icon_height; ++yy) {
+                const uint8_t *rowPtr = connection_icon + yy * bytesPerRow;
+                for (int xx = 0; xx < connection_icon_width; ++xx) {
+                    const uint8_t byteVal = pgm_read_byte(rowPtr + (xx >> 3));
+                    const uint8_t bitMask = 1U << (xx & 7); // XBM is LSB-first
+                    if (byteVal & bitMask) {
+                        display->fillRect(iconX + xx * scale, iconY + yy * scale, scale, scale);
+                    }
+                }
+            }
+
+        } else {
+            display->drawXbm(0, SCREEN_HEIGHT - connection_icon_height, connection_icon_width, connection_icon_height,
+                             connection_icon);
+        }
+    }
+}
+
 bool isAllowedPunctuation(char c)
 {
     const std::string allowed = ".,!?;:-_()[]{}'\"@#$/\\&+=%~^ ";
@@ -423,3 +464,4 @@ std::string sanitizeString(const std::string &input)
 }
 
 } // namespace graphics
+#endif

src/graphics/SharedUIDisplay.h

@@ -52,6 +52,9 @@ void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w,
 void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr = "", bool force_no_invert = false,
                       bool show_date = false);
 
+// Shared battery/time/mail header
+void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y);
+
 const int *getTextPositions(OLEDDisplay *display);
 
 bool isAllowedPunctuation(char c);

src/graphics/TFTDisplay.cpp

@@ -422,7 +422,57 @@ static LGFX *tft = nullptr;
 
 #elif defined(ST7789_CS)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+#ifdef HELTEC_V4_TFT
+#include "chsc6x.h"
+#include "lgfx/v1/Touch.hpp"
+namespace lgfx
+{
+inline namespace v1
+{
+class TOUCH_CHSC6X : public ITouch
+{
+  public:
+    TOUCH_CHSC6X(void)
+    {
+        _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+        _cfg.x_min = 0;
+        _cfg.x_max = 240;
+        _cfg.y_min = 0;
+        _cfg.y_max = 320;
+    };
 
+    bool init(void) override
+    {
+        if (chsc6xTouch == nullptr) {
+            chsc6xTouch = new chsc6x(&Wire1, TOUCH_SDA_PIN, TOUCH_SCL_PIN, TOUCH_INT_PIN, TOUCH_RST_PIN);
+        }
+        chsc6xTouch->chsc6x_init();
+        return true;
+    };
+
+    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override
+    {
+        uint16_t raw_x, raw_y;
+        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y) == 0) {
+            tp[0].x = 320 - 1 - raw_y;
+            tp[0].y = 240 - 1 - raw_x;
+            tp[0].size = 1;
+            tp[0].id = 1;
+            return 1;
+        }
+        tp[0].size = 0;
+        return 0;
+    };
+
+    void wakeup(void) override{};
+    void sleep(void) override{};
+
+  private:
+    chsc6x *chsc6xTouch = nullptr;
+};
+} // namespace v1
+} // namespace lgfx
+#endif
 class LGFX : public lgfx::LGFX_Device
 {
     lgfx::Panel_ST7789 _panel_instance;
@@ -431,6 +481,8 @@ class LGFX : public lgfx::LGFX_Device
 #if HAS_TOUCHSCREEN
 #if defined(T_WATCH_S3) || defined(ELECROW)
     lgfx::Touch_FT5x06 _touch_instance;
+#elif defined(HELTEC_V4_TFT)
+    lgfx::TOUCH_CHSC6X _touch_instance;
 #else
     lgfx::Touch_GT911 _touch_instance;
 #endif
@@ -465,8 +517,8 @@ class LGFX : public lgfx::LGFX_Device
             auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
 
             cfg.pin_cs = ST7789_CS;     // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = -1;       // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = -1;      // Pin number where BUSY is connected (-1 = disable)
+            cfg.pin_rst = ST7789_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7789_BUSY; // Pin number where BUSY is connected (-1 = disable)
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.
@@ -751,10 +803,8 @@ static LGFX *tft = nullptr;
 
 static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
 #elif ARCH_PORTDUINO
+#include "Panel_sdl.hpp"
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
-#if defined(LGFX_SDL)
-#include <lgfx/v1/platforms/sdl/Panel_sdl.hpp>
-#endif
 
 class LGFX : public lgfx::LGFX_Device
 {
@@ -783,10 +833,10 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance = new lgfx::Panel_ILI9488;
         else if (portduino_config.displayPanel == hx8357d)
             _panel_instance = new lgfx::Panel_HX8357D;
-#if defined(LGFX_SDL)
-        else if (portduino_config.displayPanel == x11) {
+#if defined(SDL_h_)
+
+        else if (portduino_config.displayPanel == x11)
             _panel_instance = new lgfx::Panel_sdl;
-        }
 #endif
         else {
             _panel_instance = new lgfx::Panel_NULL;
@@ -800,6 +850,7 @@ class LGFX : public lgfx::LGFX_Device
         buscfg.pin_dc = portduino_config.displayDC.pin; // Set SPI DC pin number (-1 = disable)
 
         _bus_instance.config(buscfg); // applies the set value to the bus.
+        if (portduino_config.displayPanel != x11)
             _panel_instance->setBus(&_bus_instance); // set the bus on the panel.
 
         auto cfg = _panel_instance->config(); // Gets a structure for display panel settings.
@@ -848,7 +899,7 @@ class LGFX : public lgfx::LGFX_Device
             _touch_instance->config(touch_cfg);
             _panel_instance->setTouch(_touch_instance);
         }
-#if defined(LGFX_SDL)
+#if defined(SDL_h_)
         if (portduino_config.displayPanel == x11) {
             lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)_panel_instance;
             sdl_panel_->setup();
@@ -1237,7 +1288,7 @@ void TFTDisplay::display(bool fromBlank)
 
 void TFTDisplay::sdlLoop()
 {
-#if defined(LGFX_SDL)
+#if defined(SDL_h_)
     static int lastPressed = 0;
     static int shuttingDown = false;
     if (portduino_config.displayPanel == x11) {
@@ -1247,27 +1298,26 @@ void TFTDisplay::sdlLoop()
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SHUTDOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
         }
-
         // debounce
-        if (lastPressed != 0 && !lgfx::v1::gpio_in(lastPressed))
+        if (lastPressed != 0 && !sdl_panel_->gpio_in(lastPressed))
             return;
-        if (!lgfx::v1::gpio_in(37)) {
+        if (!sdl_panel_->gpio_in(37)) {
             lastPressed = 37;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_RIGHT, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(36)) {
+        } else if (!sdl_panel_->gpio_in(36)) {
             lastPressed = 36;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_UP, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(38)) {
+        } else if (!sdl_panel_->gpio_in(38)) {
             lastPressed = 38;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_DOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(39)) {
+        } else if (!sdl_panel_->gpio_in(39)) {
             lastPressed = 39;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_LEFT, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(SDL_SCANCODE_KP_ENTER)) {
+        } else if (!sdl_panel_->gpio_in(SDL_SCANCODE_KP_ENTER)) {
             lastPressed = SDL_SCANCODE_KP_ENTER;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SELECT, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);

src/graphics/TimeFormatters.cpp

@@ -101,3 +101,23 @@ void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength)
     else
         snprintf(timeStr, maxLength, "unknown age");
 }
+
+void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs)
+{
+    uint32_t days = uptimeMillis / 86400000;
+    uint32_t hours = (uptimeMillis % 86400000) / 3600000;
+    uint32_t mins = (uptimeMillis % 3600000) / 60000;
+    uint32_t secs = (uptimeMillis % 60000) / 1000;
+
+    if (days) {
+        snprintf(uptimeStr, maxLength, "%s: %ud %uh", prefix, days, hours);
+    } else if (hours) {
+        snprintf(uptimeStr, maxLength, "%s: %uh %um", prefix, hours, mins);
+    } else if (!includeSecs) {
+        snprintf(uptimeStr, maxLength, "%s: %um", prefix, mins);
+    } else if (mins) {
+        snprintf(uptimeStr, maxLength, "%s: %um %us", prefix, mins, secs);
+    } else {
+        snprintf(uptimeStr, maxLength, "%s: %us", prefix, secs);
+    }
+}

src/graphics/TimeFormatters.h

@@ -24,3 +24,10 @@ bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int
  * @param maxLength Maximum length of the resulting string buffer
  */
 void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength);
+
+/**
+ * Get a compact human-readable string that only shows the largest non-zero time components.
+ * For example, 0 days 1 hour 2 minutes will display as "1h 2m" but 1 day 2 hours 3 minutes
+ * will display as "1d 2h".
+ */
+void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs = false);

src/graphics/VirtualKeyboard.cpp

@@ -1,5 +1,6 @@
-#include "VirtualKeyboard.h"
 #include "configuration.h"
+#if HAS_SCREEN
+#include "VirtualKeyboard.h"
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
@@ -736,3 +737,4 @@ bool VirtualKeyboard::isTimedOut() const
 }
 
 } // namespace graphics
+#endif

src/graphics/draw/ClockRenderer.cpp

@@ -194,17 +194,12 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     graphics::drawCommonHeader(display, x, y, titleStr, true, true);
     int line = 0;
 
-#ifdef T_WATCH_S3
-    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
-        graphics::ClockRenderer::drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
-    }
-#endif
-
     uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
     char timeString[16];
     int hour = 0;
     int minute = 0;
     int second = 0;
+
     if (rtc_sec > 0) {
         long hms = rtc_sec % SEC_PER_DAY;
         hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
@@ -215,11 +210,11 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     bool isPM = hour >= 12;
-    // hour = hour > 12 ? hour - 12 : hour;
     if (config.display.use_12h_clock) {
         hour %= 12;
-        if (hour == 0)
+        if (hour == 0) {
             hour = 12;
+        }
         snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
     } else {
         snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
@@ -229,24 +224,56 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     char secondString[8];
     snprintf(secondString, sizeof(secondString), "%02d", second);
 
-#ifdef T_WATCH_S3
-    float scale = 1.5;
-#elif defined(CHATTER_2)
-    float scale = 1.1;
-#else
-    float scale = 0.75;
-    if (isHighResolution) {
-        scale = 1.5;
-    }
-#endif
+    static bool scaleInitialized = false;
+    static float scale = 0.75f;
+    static float segmentWidth = SEGMENT_WIDTH * 0.75f;
+    static float segmentHeight = SEGMENT_HEIGHT * 0.75f;
 
-    uint16_t segmentWidth = SEGMENT_WIDTH * scale;
-    uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
+    if (!scaleInitialized) {
+        float screenwidth_target_ratio = 0.80f; // Target 80% of display width (adjustable)
+        float max_scale = 3.5f;                 // Safety limit to avoid runaway scaling
+        float step = 0.05f;                     // Step increment per iteration
+
+        float target_width = display->getWidth() * screenwidth_target_ratio;
+        float target_height =
+            display->getHeight() -
+            (isHighResolution
+                 ? 46
+                 : 33); // Be careful adjusting this number, we have to account for header and the text under the time
+
+        float calculated_width_size = 0.0f;
+        float calculated_height_size = 0.0f;
+
+        while (true) {
+            segmentWidth = SEGMENT_WIDTH * scale;
+            segmentHeight = SEGMENT_HEIGHT * scale;
+
+            calculated_width_size = segmentHeight + ((segmentWidth + (segmentHeight * 2) + 4) * 4);
+            calculated_height_size = segmentHeight + ((segmentHeight + (segmentHeight * 2) + 4) * 2);
+
+            if (calculated_width_size >= target_width || calculated_height_size >= target_height || scale >= max_scale) {
+                break;
+            }
+
+            scale += step;
+        }
+
+        // If we overshot width, back off one step and recompute segment sizes
+        if (calculated_width_size > target_width || calculated_height_size > target_height) {
+            scale -= step;
+            segmentWidth = SEGMENT_WIDTH * scale;
+            segmentHeight = SEGMENT_HEIGHT * scale;
+        }
+
+        scaleInitialized = true;
+    }
+
+    size_t len = strlen(timeString);
 
     // calculate hours:minutes string width
-    uint16_t timeStringWidth = strlen(timeString) * 5;
+    uint16_t timeStringWidth = len * 5; // base spacing between characters
 
-    for (uint8_t i = 0; i < strlen(timeString); i++) {
+    for (size_t i = 0; i < len; i++) {
         char character = timeString[i];
 
         if (character == ':') {
@@ -257,19 +284,21 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     uint16_t hourMinuteTextX = (display->getWidth() / 2) - (timeStringWidth / 2);
-
     uint16_t startingHourMinuteTextX = hourMinuteTextX;
 
-    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2);
+    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2) + 2;
 
     // iterate over characters in hours:minutes string and draw segmented characters
-    for (uint8_t i = 0; i < strlen(timeString); i++) {
+    for (size_t i = 0; i < len; i++) {
         char character = timeString[i];
 
         if (character == ':') {
             drawSegmentedDisplayColon(display, hourMinuteTextX, hourMinuteTextY, scale);
 
             hourMinuteTextX += segmentHeight + 6;
+            if (scale >= 2.0f) {
+                hourMinuteTextX += (uint16_t)(4.5f * scale);
+            }
         } else {
             drawSegmentedDisplayCharacter(display, hourMinuteTextX, hourMinuteTextY, character - '0', scale);
 
@@ -279,34 +308,27 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
         hourMinuteTextX += 5;
     }
 
-    // draw seconds string
+    // draw seconds string + AM/PM
     display->setFont(FONT_SMALL);
     int xOffset = (isHighResolution) ? 0 : -1;
     if (hour >= 10) {
         xOffset += (isHighResolution) ? 32 : 18;
     }
-    int yOffset = (isHighResolution) ? 3 : 1;
-#ifdef SENSECAP_INDICATOR
-    yOffset -= 3;
-#endif
-#ifdef T_DECK
-    yOffset -= 5;
-#endif
+
     if (config.display.use_12h_clock) {
-        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
-                            isPM ? "pm" : "am");
+        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - 1, isPM ? "pm" : "am");
     }
 
 #ifndef USE_EINK
     xOffset = (isHighResolution) ? 18 : 10;
-    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - yOffset,
+    if (scale >= 2.0f) {
+        xOffset -= (int)(4.5f * scale);
+    }
+    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - 1,
                         secondString);
 #endif
-}
 
-void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y)
-{
-    display->drawFastImage(x, y, 18, 14, bluetoothConnectedIcon);
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // Draw an analog clock
@@ -319,11 +341,6 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     graphics::drawCommonHeader(display, x, y, titleStr, true, true);
     int line = 0;
 
-#ifdef T_WATCH_S3
-    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
-        drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
-    }
-#endif
     // clock face center coordinates
     int16_t centerX = display->getWidth() / 2;
     int16_t centerY = display->getHeight() / 2;
@@ -516,6 +533,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         display->drawLine(centerX, centerY, secondX, secondY);
 #endif
     }
+    graphics::drawCommonFooter(display, x, y);
 }
 
 } // namespace ClockRenderer

src/graphics/draw/ClockRenderer.h

@@ -24,7 +24,6 @@ void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int heig
 
 // UI elements for clock displays
 // void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode = true, float scale = 1);
-void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y);
 
 } // namespace ClockRenderer
 

src/graphics/draw/CompassRenderer.cpp

@@ -1,3 +1,5 @@
+#include "configuration.h"
+#if HAS_SCREEN
 #include "CompassRenderer.h"
 #include "NodeDB.h"
 #include "UIRenderer.h"
@@ -135,3 +137,4 @@ uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
 
 } // namespace CompassRenderer
 } // namespace graphics
+#endif

src/graphics/draw/DebugRenderer.cpp

@@ -3,6 +3,7 @@
 #include "../Screen.h"
 #include "DebugRenderer.h"
 #include "FSCommon.h"
+#include "MeshService.h"
 #include "NodeDB.h"
 #include "Throttle.h"
 #include "UIRenderer.h"
@@ -10,6 +11,7 @@
 #include "gps/RTC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "mesh/Channels.h"
@@ -223,6 +225,8 @@ void drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, i
 
     display->drawString(x, getTextPositions(display)[line++], "URL: http://meshtastic.local");
 
+    graphics::drawCommonFooter(display, x, y);
+
     /* Display a heartbeat pixel that blinks every time the frame is redrawn */
 #ifdef SHOW_REDRAWS
     if (heartbeat)
@@ -503,6 +507,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[line++],
                         chUtilPercentage);
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -642,27 +647,48 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
 
-    display->drawString(nameX, getTextPositions(display)[line], appversionstr);
-#if !defined(M5STACK_UNITC6L)
-    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line < 4)) { // Only show uptime if the screen can show it
-        line += 1;
+    display->drawString(nameX, getTextPositions(display)[line++], appversionstr);
+
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show uptime if the screen can show it
         char uptimeStr[32] = "";
-        uint32_t uptime = millis() / 1000;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
+        getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
         textWidth = display->getStringWidth(uptimeStr);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
-        display->drawString(nameX, getTextPositions(display)[line], uptimeStr);
+        display->drawString(nameX, getTextPositions(display)[line++], uptimeStr);
     }
-#endif
+
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show API state if the screen can show it
+        char api_state[32] = "";
+        const char *clientWord = nullptr;
+
+        // Determine if narrow or wide screen
+        if (isHighResolution) {
+            clientWord = "Client";
+        } else {
+            clientWord = "App";
+        }
+        snprintf(api_state, sizeof(api_state), "No %ss Connected", clientWord);
+
+        if (service->api_state == service->STATE_BLE) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (BLE)", clientWord);
+        } else if (service->api_state == service->STATE_WIFI) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (WiFi)", clientWord);
+        } else if (service->api_state == service->STATE_SERIAL) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Serial)", clientWord);
+        } else if (service->api_state == service->STATE_PACKET) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Internal)", clientWord);
+        } else if (service->api_state == service->STATE_HTTP) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (HTTP)", clientWord);
+        } else if (service->api_state == service->STATE_ETH) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Ethernet)", clientWord);
+        }
+        if (api_state[0] != '\0') {
+            display->drawString((SCREEN_WIDTH - display->getStringWidth(api_state)) / 2, getTextPositions(display)[line++],
+                                api_state);
+        }
+    }
+
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************

src/graphics/draw/MenuHandler.cpp

@@ -116,7 +116,10 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
             config.lora.region = _meshtastic_Config_LoRaConfig_RegionCode(selected);
+            auto changes = SEGMENT_CONFIG;
+
             // This is needed as we wait til picking the LoRa region to generate keys for the first time.
+#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
             if (!owner.is_licensed) {
                 bool keygenSuccess = false;
                 if (config.security.private_key.size == 32) {
@@ -124,6 +127,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                     if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
                         keygenSuccess = true;
                     }
+
                 } else {
                     LOG_INFO("Generate new PKI keys");
                     crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
@@ -136,12 +140,20 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                     memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
                 }
             }
+#endif
             config.lora.tx_enabled = true;
             initRegion();
             if (myRegion->dutyCycle < 100) {
                 config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
             }
-            service->reloadConfig(SEGMENT_CONFIG);
+
+            if (strncmp(moduleConfig.mqtt.root, default_mqtt_root, strlen(default_mqtt_root)) == 0) {
+                //  Default broker is in use, so subscribe to the appropriate MQTT root topic for this region
+                sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
+                changes |= SEGMENT_MODULECONFIG;
+            }
+
+            service->reloadConfig(changes);
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };
@@ -505,7 +517,7 @@ void menuHandler::homeBaseMenu()
             }
             saveUIConfig();
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1) {
+            if (uiconfig.screen_brightness > 0) {
                 uiconfig.screen_brightness = 0;
                 io.digitalWrite(PCA_PIN_EINK_EN, LOW);
             } else {
@@ -564,21 +576,16 @@ void menuHandler::textMessageBaseMenu()
 
 void menuHandler::systemBaseMenu()
 {
-    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, FrameToggles, Test, enumEnd };
+    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, Test, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
     optionsArray[options] = "Notifications";
     optionsEnumArray[options++] = Notifications;
-#if defined(ST7789_CS) || defined(ST7796_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) ||              \
-    defined(USE_SH1107) || defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
-    optionsArray[options] = "Screen Options";
+    optionsArray[options] = "Display Options";
     optionsEnumArray[options++] = ScreenOptions;
-#endif
 
-    optionsArray[options] = "Frame Visiblity Toggle";
-    optionsEnumArray[options++] = FrameToggles;
 #if defined(M5STACK_UNITC6L)
     optionsArray[options] = "Bluetooth";
 #else
@@ -616,9 +623,6 @@ void menuHandler::systemBaseMenu()
         } else if (selected == PowerMenu) {
             menuHandler::menuQueue = menuHandler::power_menu;
             screen->runNow();
-        } else if (selected == FrameToggles) {
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
         } else if (selected == Test) {
             menuHandler::menuQueue = menuHandler::test_menu;
             screen->runNow();
@@ -752,19 +756,52 @@ void menuHandler::nodeListMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
+void menuHandler::nodeNameLengthMenu()
+{
+    enum OptionsNumbers { Back, Long, Short };
+    static const char *optionsArray[] = {"Back", "Long", "Short"};
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = "Node Name Length";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = 3;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == Long) {
+            // Set names to long
+            LOG_INFO("Setting names to long");
+            config.display.use_long_node_name = true;
+        } else if (selected == Short) {
+            // Set names to short
+            LOG_INFO("Setting names to short");
+            config.display.use_long_node_name = false;
+        } else if (selected == Back) {
+            menuQueue = screen_options_menu;
+            screen->runNow();
+        }
+    };
+    bannerOptions.InitialSelected = config.display.use_long_node_name == true ? 1 : 2;
+    screen->showOverlayBanner(bannerOptions);
+}
+
 void menuHandler::resetNodeDBMenu()
 {
-    static const char *optionsArray[] = {"Back", "Confirm"};
+    static const char *optionsArray[] = {"Back", "Reset All", "Preserve Favorites"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Confirm Reset NodeDB";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
+    bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == 1 || selected == 2) {
             disableBluetooth();
+            screen->setFrames(Screen::FOCUS_DEFAULT);
+        }
+        if (selected == 1) {
             LOG_INFO("Initiate node-db reset");
             nodeDB->resetNodes();
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+        } else if (selected == 2) {
+            LOG_INFO("Initiate node-db reset but keeping favorites");
+            nodeDB->resetNodes(1);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -852,24 +889,31 @@ void menuHandler::GPSFormatMenu()
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 1) {
             uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_DEC;
+            saveUIConfig();
             service->reloadConfig(SEGMENT_CONFIG);
         } else if (selected == 2) {
             uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_DMS;
+            saveUIConfig();
             service->reloadConfig(SEGMENT_CONFIG);
         } else if (selected == 3) {
             uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_UTM;
+            saveUIConfig();
             service->reloadConfig(SEGMENT_CONFIG);
         } else if (selected == 4) {
             uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_MGRS;
+            saveUIConfig();
             service->reloadConfig(SEGMENT_CONFIG);
         } else if (selected == 5) {
             uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_OLC;
+            saveUIConfig();
             service->reloadConfig(SEGMENT_CONFIG);
         } else if (selected == 6) {
             uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_OSGR;
+            saveUIConfig();
             service->reloadConfig(SEGMENT_CONFIG);
         } else if (selected == 7) {
             uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_MLS;
+            saveUIConfig();
             service->reloadConfig(SEGMENT_CONFIG);
         } else {
             menuQueue = position_base_menu;
@@ -893,7 +937,9 @@ void menuHandler::BluetoothToggleMenu()
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1 || selected == 2) {
+        if (selected == 0)
+            return;
+        else if (selected != (config.bluetooth.enabled ? 1 : 2)) {
             InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
         }
@@ -904,11 +950,11 @@ void menuHandler::BluetoothToggleMenu()
 
 void menuHandler::BuzzerModeMenu()
 {
-    static const char *optionsArray[] = {"All Enabled", "Disabled", "Notifications", "System Only"};
+    static const char *optionsArray[] = {"All Enabled", "Disabled", "Notifications", "System Only", "DMs Only"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Buzzer Mode";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 4;
+    bannerOptions.optionsCount = 5;
     bannerOptions.bannerCallback = [](int selected) -> void {
         config.device.buzzer_mode = (meshtastic_Config_DeviceConfig_BuzzerMode)selected;
         service->reloadConfig(SEGMENT_CONFIG);
@@ -1287,11 +1333,16 @@ void menuHandler::screenOptionsMenu()
     hasSupportBrightness = false;
 #endif
 
-    enum optionsNumbers { Back, Brightness, ScreenColor };
-    static const char *optionsArray[4] = {"Back"};
-    static int optionsEnumArray[4] = {Back};
+    enum optionsNumbers { Back, NodeNameLength, Brightness, ScreenColor, FrameToggles, DisplayUnits };
+    static const char *optionsArray[5] = {"Back"};
+    static int optionsEnumArray[5] = {Back};
     int options = 1;
 
+#if defined(T_DECK) || defined(T_LORA_PAGER)
+    optionsArray[options] = "Show Long/Short Name";
+    optionsEnumArray[options++] = NodeNameLength;
+#endif
+
     // Only show brightness for B&W displays
     if (hasSupportBrightness) {
         optionsArray[options] = "Brightness";
@@ -1304,8 +1355,14 @@ void menuHandler::screenOptionsMenu()
     optionsEnumArray[options++] = ScreenColor;
 #endif
 
+    optionsArray[options] = "Frame Visibility Toggle";
+    optionsEnumArray[options++] = FrameToggles;
+
+    optionsArray[options] = "Display Units";
+    optionsEnumArray[options++] = DisplayUnits;
+
     BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Screen Options";
+    bannerOptions.message = "Display Options";
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
@@ -1316,6 +1373,15 @@ void menuHandler::screenOptionsMenu()
         } else if (selected == ScreenColor) {
             menuHandler::menuQueue = menuHandler::tftcolormenupicker;
             screen->runNow();
+        } else if (selected == NodeNameLength) {
+            menuHandler::menuQueue = menuHandler::node_name_length_menu;
+            screen->runNow();
+        } else if (selected == FrameToggles) {
+            menuHandler::menuQueue = menuHandler::FrameToggles;
+            screen->runNow();
+        } else if (selected == DisplayUnits) {
+            menuHandler::menuQueue = menuHandler::DisplayUnits;
+            screen->runNow();
         } else {
             menuQueue = system_base_menu;
             screen->runNow();
@@ -1414,6 +1480,8 @@ void menuHandler::FrameToggles_menu()
         lora,
         clock,
         show_favorites,
+        show_telemetry,
+        show_power,
         enumEnd
     };
     static const char *optionsArray[enumEnd] = {"Finish"};
@@ -1452,6 +1520,12 @@ void menuHandler::FrameToggles_menu()
     optionsArray[options] = screen->isFrameHidden("show_favorites") ? "Show Favorites" : "Hide Favorites";
     optionsEnumArray[options++] = show_favorites;
 
+    optionsArray[options] = moduleConfig.telemetry.environment_screen_enabled ? "Hide Telemetry" : "Show Telemetry";
+    optionsEnumArray[options++] = show_telemetry;
+
+    optionsArray[options] = moduleConfig.telemetry.power_screen_enabled ? "Hide Power" : "Show Power";
+    optionsEnumArray[options++] = show_power;
+
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Show/Hide Frames";
     bannerOptions.optionsArrayPtr = optionsArray;
@@ -1506,6 +1580,42 @@ void menuHandler::FrameToggles_menu()
             screen->toggleFrameVisibility("show_favorites");
             menuHandler::menuQueue = menuHandler::FrameToggles;
             screen->runNow();
+        } else if (selected == show_telemetry) {
+            moduleConfig.telemetry.environment_screen_enabled = !moduleConfig.telemetry.environment_screen_enabled;
+            menuHandler::menuQueue = menuHandler::FrameToggles;
+            screen->runNow();
+        } else if (selected == show_power) {
+            moduleConfig.telemetry.power_screen_enabled = !moduleConfig.telemetry.power_screen_enabled;
+            menuHandler::menuQueue = menuHandler::FrameToggles;
+            screen->runNow();
+        }
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
+void menuHandler::DisplayUnits_menu()
+{
+    enum optionsNumbers { Back, MetricUnits, ImperialUnits };
+
+    static const char *optionsArray[] = {"Back", "Metric", "Imperial"};
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = " Select display units";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = 3;
+    if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL)
+        bannerOptions.InitialSelected = 2;
+    else
+        bannerOptions.InitialSelected = 1;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == MetricUnits) {
+            config.display.units = meshtastic_Config_DisplayConfig_DisplayUnits_METRIC;
+            service->reloadConfig(SEGMENT_CONFIG);
+        } else if (selected == ImperialUnits) {
+            config.display.units = meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL;
+            service->reloadConfig(SEGMENT_CONFIG);
+        } else {
+            menuHandler::menuQueue = menuHandler::screen_options_menu;
+            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -1577,6 +1687,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case brightness_picker:
         BrightnessPickerMenu();
         break;
+    case node_name_length_menu:
+        nodeNameLengthMenu();
+        break;
     case reboot_menu:
         rebootMenu();
         break;
@@ -1622,6 +1735,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case FrameToggles:
         FrameToggles_menu();
         break;
+    case DisplayUnits:
+        DisplayUnits_menu();
+        break;
     case throttle_message:
         screen->showSimpleBanner("Too Many Attempts\nTry again in 60 seconds.", 5000);
         break;

src/graphics/draw/MenuHandler.h

@@ -43,7 +43,9 @@ class menuHandler
         key_verification_final_prompt,
         trace_route_menu,
         throttle_message,
-        FrameToggles
+        node_name_length_menu,
+        FrameToggles,
+        DisplayUnits
     };
     static screenMenus menuQueue;
 
@@ -85,7 +87,9 @@ class menuHandler
     static void notificationsMenu();
     static void screenOptionsMenu();
     static void powerMenu();
+    static void nodeNameLengthMenu();
     static void FrameToggles_menu();
+    static void DisplayUnits_menu();
     static void textMessageMenu();
 
   private:

src/graphics/draw/MessageRenderer.cpp

@@ -213,6 +213,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #else
         display->drawString(center_text, getTextPositions(display)[2], messageString);
 #endif
+        graphics::drawCommonFooter(display, x, y);
         return;
     }
 
@@ -423,6 +424,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // Draw header at the end to sort out overlapping elements
     graphics::drawCommonHeader(display, x, y, titleStr);
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerStr, const char *messageBuf, int textWidth)

src/graphics/draw/NodeListRenderer.cpp

@@ -53,28 +53,56 @@ static int scrollIndex = 0;
 // Utility Functions
 // =============================
 
-const char *getSafeNodeName(meshtastic_NodeInfoLite *node)
+const char *getSafeNodeName(OLEDDisplay *display, meshtastic_NodeInfoLite *node)
 {
+    const char *name = NULL;
     static char nodeName[16] = "?";
+    if (config.display.use_long_node_name == true) {
+        if (node->has_user && strlen(node->user.long_name) > 0) {
+            name = node->user.long_name;
+        } else {
+            snprintf(nodeName, sizeof(nodeName), "(%04X)", (uint16_t)(node->num & 0xFFFF));
+        }
+    } else {
         if (node->has_user && strlen(node->user.short_name) > 0) {
-        bool valid = true;
-        const char *name = node->user.short_name;
-        for (size_t i = 0; i < strlen(name); i++) {
-            uint8_t c = (uint8_t)name[i];
-            if (c < 32 || c > 126) {
-                valid = false;
-                break;
+            name = node->user.short_name;
+        } else {
+            snprintf(nodeName, sizeof(nodeName), "(%04X)", (uint16_t)(node->num & 0xFFFF));
         }
     }
-        if (valid) {
-            strncpy(nodeName, name, sizeof(nodeName) - 1);
+
+    // Use sanitizeString() function and copy directly into nodeName
+    std::string sanitized_name = sanitizeString(name ? name : "");
+
+    if (!sanitized_name.empty()) {
+        strncpy(nodeName, sanitized_name.c_str(), sizeof(nodeName) - 1);
         nodeName[sizeof(nodeName) - 1] = '\0';
     } else {
         snprintf(nodeName, sizeof(nodeName), "(%04X)", (uint16_t)(node->num & 0xFFFF));
     }
-    } else {
-        snprintf(nodeName, sizeof(nodeName), "(%04X)", (uint16_t)(node->num & 0xFFFF));
+
+    if (config.display.use_long_node_name == true) {
+        int availWidth = (SCREEN_WIDTH / 2) - 65;
+        if (availWidth < 0)
+            availWidth = 0;
+
+        size_t origLen = strlen(nodeName);
+        while (nodeName[0] && display->getStringWidth(nodeName) > availWidth) {
+            nodeName[strlen(nodeName) - 1] = '\0';
         }
+
+        // If we actually truncated, append "..." (ensure space remains in buffer)
+        if (strlen(nodeName) < origLen) {
+            size_t len = strlen(nodeName);
+            size_t maxLen = sizeof(nodeName) - 4; // 3 for "..." and 1 for '\0'
+            if (len > maxLen) {
+                nodeName[maxLen] = '\0';
+                len = maxLen;
+            }
+            strcat(nodeName, "...");
+        }
+    }
+
     return nodeName;
 }
 
@@ -141,7 +169,7 @@ void drawEntryLastHeard(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
     bool isLeftCol = (x < SCREEN_WIDTH / 2);
     int timeOffset = (isHighResolution) ? (isLeftCol ? 7 : 10) : (isLeftCol ? 3 : 7);
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
 
     char timeStr[10];
     uint32_t seconds = sinceLastSeen(node);
@@ -186,7 +214,7 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
 
     int barsXOffset = columnWidth - barsOffset;
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -230,7 +258,7 @@ void drawNodeDistance(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     bool isLeftCol = (x < SCREEN_WIDTH / 2);
     int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
     char distStr[10] = "";
 
     meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
@@ -325,7 +353,7 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     // Adjust max text width depending on column and screen width
     int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -356,11 +384,11 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     float bearing = GeoCoord::bearing(userLat, userLon, nodeLat, nodeLon);
     float bearingToNode = RAD_TO_DEG * bearing;
     float relativeBearing = fmod((bearingToNode - myHeading + 360), 360);
-    float angle = relativeBearing * DEG_TO_RAD;
     // Shrink size by 2px
     int size = FONT_HEIGHT_SMALL - 5;
     CompassRenderer::drawArrowToNode(display, centerX, centerY, size, relativeBearing);
     /*
+    float angle = relativeBearing * DEG_TO_RAD;
     float halfSize = size / 2.0;
 
     // Point of the arrow
@@ -397,6 +425,12 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 {
     const int COMMON_HEADER_HEIGHT = FONT_HEIGHT_SMALL - 1;
     const int rowYOffset = FONT_HEIGHT_SMALL - 3;
+    bool locationScreen = false;
+
+    if (strcmp(title, "Bearings") == 0)
+        locationScreen = true;
+    else if (strcmp(title, "Distance") == 0)
+        locationScreen = true;
 #if defined(M5STACK_UNITC6L)
     int columnWidth = display->getWidth();
 #else
@@ -412,7 +446,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 
     int totalEntries = nodeDB->getNumMeshNodes();
     int totalRowsAvailable = (display->getHeight() - y) / rowYOffset;
-
+    int numskipped = 0;
     int visibleNodeRows = totalRowsAvailable;
 #if defined(M5STACK_UNITC6L)
     int totalColumns = 1;
@@ -432,6 +466,10 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     int rowCount = 0;
 
     for (int i = startIndex; i < endIndex; ++i) {
+        if (locationScreen && !nodeDB->getMeshNodeByIndex(i)->has_position) {
+            numskipped++;
+            continue;
+        }
         int xPos = x + (col * columnWidth);
         int yPos = y + yOffset;
         renderer(display, nodeDB->getMeshNodeByIndex(i), xPos, yPos, columnWidth);
@@ -454,6 +492,9 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
         }
     }
 
+    // This should correct the scrollbar
+    totalEntries -= numskipped;
+
 #if !defined(M5STACK_UNITC6L)
     // Draw column separator
     if (shownCount > 0) {
@@ -464,6 +505,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 #endif
     const int scrollStartY = y + 3;
     drawScrollbar(display, visibleNodeRows, totalEntries, scrollIndex, 2, scrollStartY);
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // =============================

src/graphics/draw/UIRenderer.cpp

@@ -11,6 +11,7 @@
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "target_specific.h"
@@ -125,8 +126,10 @@ void UIRenderer::drawGpsCoordinates(OLEDDisplay *display, int16_t x, int16_t y,
     char displayLine[32];
 
     if (!gps->getIsConnected() && !config.position.fixed_position) {
+        if (strcmp(mode, "line1") == 0) {
             strcpy(displayLine, "No GPS present");
             display->drawString(x, y, displayLine);
+        }
     } else if (!gps->getHasLock() && !config.position.fixed_position) {
         if (strcmp(mode, "line1") == 0) {
             strcpy(displayLine, "No GPS Lock");
@@ -381,17 +384,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
     // === 4. Uptime (only show if metric is present) ===
     char uptimeStr[32] = "";
     if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
-        uint32_t uptime = node->device_metrics.uptime_seconds;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
+        getUptimeStr(node->device_metrics.uptime_seconds * 1000, " Up", uptimeStr, sizeof(uptimeStr));
     }
     if (uptimeStr[0] && line < 5) {
         display->drawString(x, getTextPositions(display)[line++], uptimeStr);
@@ -550,6 +543,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
         // else show nothing
     }
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -561,6 +555,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
     int line = 1;
+    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
 
     // === Header ===
 #if defined(M5STACK_UNITC6L)
@@ -588,18 +583,8 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     drawNodes(display, x + 1, getTextPositions(display)[line] + 2, nodeStatus, -1, false, "online");
 #endif
     char uptimeStr[32] = "";
-    uint32_t uptime = millis() / 1000;
-    uint32_t days = uptime / 86400;
-    uint32_t hours = (uptime % 86400) / 3600;
-    uint32_t mins = (uptime % 3600) / 60;
-    // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
 #if !defined(M5STACK_UNITC6L)
-    if (days)
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %ud %uh", days, hours);
-    else if (hours)
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %uh %um", hours, mins);
-    else
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %um", mins);
+    getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
 #endif
     display->drawString(SCREEN_WIDTH - display->getStringWidth(uptimeStr), getTextPositions(display)[line++], uptimeStr);
 
@@ -738,7 +723,6 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     int yOffset = (isHighResolution) ? 0 : 5;
     std::string longNameStr;
 
-    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
     if (ourNode && ourNode->has_user && strlen(ourNode->user.long_name) > 0) {
         longNameStr = sanitizeString(ourNode->user.long_name);
     }
@@ -769,6 +753,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
         display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
     }
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // Start Functions to write date/time to the screen
@@ -998,24 +983,7 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     const char *displayLine = ""; // Initialize to empty string by default
     meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
 
-    bool usePhoneGPS = (ourNode && nodeDB->hasValidPosition(ourNode) &&
-                        config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED);
-
-    if (usePhoneGPS) {
-        // Phone-provided GPS is active
-        displayLine = "Phone GPS";
-        int yOffset = (isHighResolution) ? 3 : 1;
-        if (isHighResolution) {
-            NodeListRenderer::drawScaledXBitmap16x16(x, getTextPositions(display)[line] + yOffset - 5, imgSatellite_width,
-                                                     imgSatellite_height, imgSatellite, display);
-        } else {
-            display->drawXbm(x + 1, getTextPositions(display)[line] + yOffset, imgSatellite_width, imgSatellite_height,
-                             imgSatellite);
-        }
-        int xOffset = (isHighResolution) ? 6 : 0;
-        display->drawString(x + 11 + xOffset, getTextPositions(display)[line++], displayLine);
-    } else if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
-        // GPS disabled / not present
+    if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
         if (config.position.fixed_position) {
             displayLine = "Fixed GPS";
         } else {
@@ -1061,36 +1029,17 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0) {
         // === Second Row: Last GPS Fix ===
         if (gpsStatus->getLastFixMillis() > 0) {
-            uint32_t delta = (millis() - gpsStatus->getLastFixMillis()) / 1000; // seconds since last fix
-            uint32_t days = delta / 86400;
-            uint32_t hours = (delta % 86400) / 3600;
-            uint32_t mins = (delta % 3600) / 60;
-            uint32_t secs = delta % 60;
-
-            char buf[32];
+            uint32_t delta = millis() - gpsStatus->getLastFixMillis();
+            char uptimeStr[32];
 #if defined(USE_EINK)
             // E-Ink: skip seconds, show only days/hours/mins
-            if (days > 0) {
-                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
-            } else if (hours > 0) {
-                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
-            } else {
-                snprintf(buf, sizeof(buf), "Last: %um", mins);
-            }
+            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), false);
 #else
             // Non E-Ink: include seconds where useful
-            if (days > 0) {
-                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
-            } else if (hours > 0) {
-                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
-            } else if (mins > 0) {
-                snprintf(buf, sizeof(buf), "Last: %um %us", mins, secs);
-            } else {
-                snprintf(buf, sizeof(buf), "Last: %us", secs);
-            }
+            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), true);
 #endif
 
-            display->drawString(0, getTextPositions(display)[line++], buf);
+            display->drawString(0, getTextPositions(display)[line++], uptimeStr);
         } else {
             display->drawString(0, getTextPositions(display)[line++], "Last: ?");
         }
@@ -1103,6 +1052,16 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
             // === Fourth Row: Line 2 GPS Info ===
             UIRenderer::drawGpsCoordinates(display, x, getTextPositions(display)[line++], gpsStatus, "line2");
         }
+
+        // === Final Row: Altitude ===
+        char altitudeLine[32] = {0};
+        int32_t alt = geoCoord.getAltitude();
+        if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
+            snprintf(altitudeLine, sizeof(altitudeLine), "Alt: %.0fft", alt * METERS_TO_FEET);
+        } else {
+            snprintf(altitudeLine, sizeof(altitudeLine), "Alt: %.0im", alt);
+        }
+        display->drawString(x, getTextPositions(display)[line++], altitudeLine);
     }
 #if !defined(M5STACK_UNITC6L)
     // === Draw Compass if heading is valid ===
@@ -1188,6 +1147,7 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     }
 #endif
 #endif // HAS_GPS
+    graphics::drawCommonFooter(display, x, y);
 }
 
 #ifdef USERPREFS_OEM_TEXT
@@ -1272,7 +1232,13 @@ void UIRenderer::drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *sta
     if (totalIcons == 0)
         return;
 
-    const size_t iconsPerPage = (SCREEN_WIDTH + spacing) / (iconSize + spacing);
+    const int navPadding = isHighResolution ? 24 : 12; // padding per side
+
+    int usableWidth = SCREEN_WIDTH - (navPadding * 2);
+    if (usableWidth < iconSize)
+        usableWidth = iconSize;
+
+    const size_t iconsPerPage = usableWidth / (iconSize + spacing);
     const size_t currentPage = currentFrame / iconsPerPage;
     const size_t pageStart = currentPage * iconsPerPage;
     const size_t pageEnd = min(pageStart + iconsPerPage, totalIcons);
@@ -1343,6 +1309,47 @@ void UIRenderer::drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *sta
             display->setColor(WHITE);
         }
     }
+
+    // Compact arrow drawer
+    auto drawArrow = [&](bool rightSide) {
+        display->setColor(WHITE);
+
+        const int offset = isHighResolution ? 3 : 1;
+        const int halfH = rectHeight / 2;
+
+        const int top = (y - 2) + (rectHeight - halfH) / 2;
+        const int bottom = top + halfH - 1;
+        const int midY = top + (halfH / 2);
+
+        const int maxW = 4;
+
+        // Determine left X coordinate
+        int baseX = rightSide ? (rectX + rectWidth + offset) : // right arrow
+                        (rectX - offset - 1);                  // left arrow
+
+        for (int yy = top; yy <= bottom; yy++) {
+            int dist = abs(yy - midY);
+            int lineW = maxW - (dist * maxW / (halfH / 2));
+            if (lineW < 1)
+                lineW = 1;
+
+            if (rightSide) {
+                display->drawHorizontalLine(baseX, yy, lineW);
+            } else {
+                display->drawHorizontalLine(baseX - lineW + 1, yy, lineW);
+            }
+        }
+    };
+    // Right arrow
+    if (pageEnd < totalIcons) {
+        drawArrow(true);
+    }
+
+    // Left arrow
+    if (pageStart > 0) {
+        drawArrow(false);
+    }
+
     // Knock the corners off the square
     display->setColor(BLACK);
     display->drawRect(rectX, y - 2, 1, 1);

src/graphics/emotes.cpp

@@ -1,3 +1,5 @@
+#include "configuration.h"
+#if HAS_SCREEN
 #include "emotes.h"
 
 namespace graphics
@@ -16,6 +18,8 @@ const Emote emotes[] = {
     {"\U0001F642", Slightly_Smiling, Slightly_Smiling_width, Slightly_Smiling_height}, // 🙂 Slightly Smiling Face
     {"\U0001F609", Winking_Face, Winking_Face_width, Winking_Face_height},             // 😉 Winking Face
     {"\U0001F601", Grinning_Smiling_Eyes, Grinning_Smiling_Eyes_width, Grinning_Smiling_Eyes_height}, // 😁 Grinning Smiling Eyes
+    {"\U0001F60D", Heart_eyes, Heart_eyes_width, Heart_eyes_height},                                  // 😍 Heart Eyes
+    {"\U0001F970", heart_smile, heart_smile_width, heart_smile_height}, // 🥰 Smiling Face with Hearts
 
     // --- Question/Alert ---
     {"\u2753", question, question_width, question_height}, // ❓ Question Mark
@@ -28,9 +32,13 @@ const Emote emotes[] = {
     {"\U0001F605", haha, haha_width, haha_height},                                              // 😅 Smiling with Sweat
     {"\U0001F604", Grinning_SmilingEyes2, Grinning_SmilingEyes2_width,
      Grinning_SmilingEyes2_height}, // 😄 Grinning Face with Smiling Eyes
+    {"\U0001F62D", Loudly_Crying_Face, Loudly_Crying_Face_width, Loudly_Crying_Face_height}, // 😭 Loudly Crying Face
 
     // --- Gestures and People ---
     {"\U0001F44B", wave_icon, wave_icon_width, wave_icon_height},             // 👋 Waving Hand
+    {"\u270C\uFE0F", peace_sign, peace_sign_width, peace_sign_height},        // ✌️ Victory Hand
+    {"\U0001F596", vulcan_salute, vulcan_salute_width, vulcan_salute_height}, // 🖖 Vulcan Salute
+    {"\U0001F64F", Praying, Praying_width, Praying_height},                   // 🙏 Praying Hands
     {"\U0001F920", cowboy, cowboy_width, cowboy_height},                      // 🤠 Cowboy Hat Face
     {"\U0001F3A7", deadmau5, deadmau5_width, deadmau5_height},                // 🎧 Headphones
 
@@ -43,8 +51,12 @@ const Emote emotes[] = {
 
     // --- Misc Faces ---
     {"\U0001F608", devil, devil_width, devil_height}, // 😈 Smiling Face with Horns
+    {"\U0001F921", clown, clown_width, clown_height}, // 🤡 Clown Face
+    {"\U0001F916", robo, robo_width, robo_height},    // 🤖 Robot Face
 
     // --- Hearts (Multiple Unicode Aliases) ---
+    {"\u2665", heart, heart_width, heart_height},       // ♥ Black Heart Suit
+    {"\u2665\uFE0F", heart, heart_width, heart_height}, // ♥️ Black Heart Suit (emoji presentation)
     {"\u2764\uFE0F", heart, heart_width, heart_height}, // ❤️ Red Heart
     {"\U0001F9E1", heart, heart_width, heart_height},   // 🧡 Orange Heart
     {"\U00002763", heart, heart_width, heart_height},   // ❣ Heart Exclamation
@@ -56,222 +68,166 @@ const Emote emotes[] = {
 
     // --- Objects ---
     {"\U0001F4A9", poo, poo_width, poo_height},                   // 💩 Pile of Poo
-    {"\U0001F514", bell_icon, bell_icon_width, bell_icon_height} // 🔔 Bell
+    {"\U0001F514", bell_icon, bell_icon_width, bell_icon_height}, // 🔔 Bell
+    {"\U0001F36A", cookie, cookie_width, cookie_height},          // 🍪 Cookie
+    {"\U0001F525", Fire, Fire_width, Fire_height},                // 🔥 Fire
+    {"\u2728", Sparkles, Sparkles_width, Sparkles_height},        // ✨ Sparkles
+    {"\U0001F573\uFE0F", hole, hole_width, hole_height},          // 🕳️ Hole
+    {"\U0001F3B3", bowling, bowling_width, bowling_height}        // 🎳 Bowling
 #endif
 };
 
 const int numEmotes = sizeof(emotes) / sizeof(emotes[0]);
 
 #ifndef EXCLUDE_EMOJI
-const unsigned char thumbup[] PROGMEM = {
-    0x00, 0x1C, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x80, 0x09, 0x00, 0x00,
-    0xC0, 0x08, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00,
-    0x0C, 0xCE, 0x7F, 0x00, 0x04, 0x20, 0x80, 0x00, 0x02, 0x20, 0x80, 0x00, 0x02, 0x60, 0xC0, 0x00, 0x01, 0xF8, 0xFF, 0x01,
-    0x01, 0x08, 0x00, 0x01, 0x01, 0x08, 0x00, 0x01, 0x01, 0xF8, 0xFF, 0x00, 0x01, 0x10, 0x80, 0x00, 0x01, 0x18, 0x80, 0x00,
-    0x02, 0x30, 0xC0, 0x00, 0x06, 0xE0, 0x3F, 0x00, 0x0C, 0x20, 0x30, 0x00, 0x38, 0x20, 0x10, 0x00, 0xE0, 0xCF, 0x1F, 0x00,
-};
+const unsigned char thumbup[] PROGMEM = {0x00, 0x03, 0x80, 0x04, 0x80, 0x04, 0x40, 0x04, 0x20, 0x02, 0x18,
+                                         0x02, 0x06, 0x3F, 0x06, 0x40, 0x06, 0x70, 0x06, 0x40, 0x06, 0x70,
+                                         0x06, 0x40, 0x06, 0x30, 0x08, 0x20, 0xF0, 0x1F, 0x00, 0x00};
 
-const unsigned char thumbdown[] PROGMEM = {
-    0xE0, 0xCF, 0x1F, 0x00, 0x38, 0x20, 0x10, 0x00, 0x0C, 0x20, 0x30, 0x00, 0x06, 0xE0, 0x3F, 0x00, 0x02, 0x30, 0xC0, 0x00,
-    0x01, 0x18, 0x80, 0x00, 0x01, 0x10, 0x80, 0x00, 0x01, 0xF8, 0xFF, 0x00, 0x01, 0x08, 0x00, 0x01, 0x01, 0x08, 0x00, 0x01,
-    0x01, 0xF8, 0xFF, 0x01, 0x02, 0x60, 0xC0, 0x00, 0x02, 0x20, 0x80, 0x00, 0x04, 0x20, 0x80, 0x00, 0x0C, 0xCE, 0x7F, 0x00,
-    0x18, 0x02, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, 0x20, 0x04, 0x00, 0x00, 0x40, 0x08, 0x00, 0x00, 0xC0, 0x08, 0x00, 0x00,
-    0x80, 0x09, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00,
-};
+const unsigned char thumbdown[] PROGMEM = {0xF0, 0x1F, 0x08, 0x20, 0x06, 0x30, 0x06, 0x40, 0x06, 0x70, 0x06,
+                                           0x40, 0x06, 0x70, 0x06, 0x40, 0x06, 0x3F, 0x18, 0x02, 0x20, 0x02,
+                                           0x40, 0x04, 0x80, 0x04, 0x80, 0x04, 0x00, 0x03, 0x00, 0x00};
 
-const unsigned char Smiling_Eyes[] PROGMEM = {
-    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xff, 0xff, 0xcf, 0xfc, 0xff, 0xff, 0xcf,
-    0x7e, 0xf8, 0xc3, 0xdf, 0x3e, 0xf0, 0x81, 0xdf, 0xbf, 0xf7, 0xbd, 0xff, 0xff, 0xff, 0xff, 0xff, 0x9f, 0xff, 0x3f, 0xff,
-    0x6f, 0xff, 0xdf, 0xfe, 0x6f, 0xff, 0xdf, 0xfe, 0x9f, 0xff, 0x3f, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0x7e, 0xff, 0xdf, 0xdf,
-    0x7c, 0xff, 0xdf, 0xcf, 0xfc, 0xfe, 0xef, 0xcf, 0xf8, 0xf9, 0xf7, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
-    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x07, 0xc0};
+const unsigned char Smiling_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+                                              0x4A, 0x02, 0x40, 0x02, 0x40, 0x22, 0x44, 0x22, 0x44, 0xC2, 0x43,
+                                              0x04, 0x20, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char Grinning[] PROGMEM = {
-    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xf9, 0xf3, 0xcf, 0xfc, 0xf0, 0xe1, 0xcf,
-    0xfe, 0xf0, 0xe1, 0xdf, 0xfe, 0xf0, 0xe1, 0xdf, 0xff, 0xf0, 0xe1, 0xff, 0xff, 0xf9, 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff,
-    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x80, 0xff, 0xbe, 0xff, 0xbf, 0xdf, 0x7e, 0x00, 0xc0, 0xdf,
-    0x7c, 0x00, 0xc0, 0xcf, 0xfc, 0x00, 0xe0, 0xcf, 0xf8, 0x01, 0xf0, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
-    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
+const unsigned char Grinning[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
+                                          0x42, 0x02, 0x40, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
+                                          0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char Slightly_Smiling[] PROGMEM = {
-    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xf9, 0xf3, 0xcf, 0xfc, 0xf0, 0xe1, 0xcf,
-    0xfe, 0xf0, 0xe1, 0xdf, 0xfe, 0xf0, 0xe1, 0xdf, 0xff, 0xf0, 0xe1, 0xff, 0xff, 0xf9, 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff,
-    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0x7e, 0xff, 0xdf, 0xdf,
-    0x7c, 0xff, 0xdf, 0xcf, 0xfc, 0xfe, 0xef, 0xcf, 0xf8, 0xf9, 0xf7, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
-    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
+const unsigned char Slightly_Smiling[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x22, 0x42,
+                                                  0x42, 0x02, 0x40, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
+                                                  0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char Winking_Face[] PROGMEM = {
-    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-    0xf0, 0xf0, 0xff, 0xc3, 0x78, 0xef, 0xc3, 0xc7, 0xb8, 0xdf, 0xbd, 0xcf, 0xfc, 0xf9, 0x7f, 0xcf, 0xfc, 0xf0, 0xff, 0xcf,
-    0xfe, 0xf0, 0xc3, 0xdf, 0xfe, 0xf0, 0x81, 0xdf, 0xff, 0xf0, 0xbf, 0xff, 0xff, 0xf9, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0x7e, 0xff, 0xdf, 0xdf,
-    0x7c, 0xff, 0xdf, 0xcf, 0xfc, 0xfe, 0xef, 0xcf, 0xf8, 0xf9, 0xf7, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
-    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x07, 0xc0};
+const unsigned char Winking_Face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x44, 0x20, 0x42,
+                                              0x46, 0x02, 0x40, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
+                                              0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char Grinning_Smiling_Eyes[] PROGMEM = {
-    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0xfc, 0xf8, 0xe3, 0xcf, 0x7c, 0xf7, 0xdd, 0xcf,
-    0xbe, 0xef, 0xbe, 0xdf, 0xbe, 0xef, 0xbe, 0xdf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0xff, 0x5e, 0x55, 0x55, 0xdf, 0x5e, 0x55, 0x55, 0xdf,
-    0x3c, 0x00, 0x80, 0xcf, 0x7c, 0x55, 0xd5, 0xcf, 0xf8, 0x54, 0xe5, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
-    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
+const unsigned char Grinning_Smiling_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+                                                       0x4A, 0x02, 0x40, 0xFA, 0x5F, 0x0A, 0x50, 0x0A, 0x50, 0x12, 0x48,
+                                                       0x24, 0x24, 0xC4, 0x23, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char question[] PROGMEM = {
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x80, 0xFF, 0x01, 0x00, 0xC0, 0xFF, 0x07, 0x00, 0xE0, 0xFF, 0x07, 0x00,
-    0xE0, 0xC3, 0x0F, 0x00, 0xF0, 0x81, 0x0F, 0x00, 0xF0, 0x01, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x80, 0x0F, 0x00,
-    0x00, 0xC0, 0x0F, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xF8, 0x01, 0x00, 0x00, 0x7C, 0x00, 0x00,
-    0x00, 0x3C, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
+const unsigned char heart_smile[] PROGMEM = {0x00, 0x00, 0x6C, 0x07, 0x7C, 0x18, 0x7C, 0x20, 0x38, 0x24, 0x52,
+                                             0x0A, 0x02, 0xD8, 0x02, 0xF8, 0x22, 0xFC, 0x20, 0x74, 0xDB, 0x23,
+                                             0x1F, 0x00, 0x1F, 0x20, 0x0E, 0x18, 0xE4, 0x07, 0x00, 0x00};
 
-const unsigned char bang[] PROGMEM = {
-    0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x0F, 0xFC, 0x3F, 0xFF, 0x07, 0xF8, 0x3F, 0xFF, 0x07, 0xF8, 0x3F,
-    0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F,
-    0xFE, 0x03, 0xF0, 0x1F, 0xFE, 0x03, 0xF0, 0x1F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F,
-    0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x03, 0xF0, 0x0F, 0xFC, 0x01, 0xE0, 0x0F, 0xFC, 0x01, 0xE0, 0x0F,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x03, 0xFC, 0x03, 0xF0, 0x0F, 0xFE, 0x03, 0xF0, 0x1F,
-    0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFE, 0x07, 0xF8, 0x1F, 0xFC, 0x03, 0xF0, 0x0F, 0xF8, 0x01, 0xE0, 0x07,
-};
+const unsigned char Heart_eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x54, 0x2A, 0xFA,
+                                            0x5F, 0x72, 0x4E, 0x22, 0x44, 0x02, 0x40, 0x12, 0x48, 0x12, 0x48,
+                                            0x24, 0x24, 0xC4, 0x23, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char haha[] PROGMEM = {
-    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0x7f, 0xc0, 0xe0, 0xf9, 0xf3, 0xc0,
-    0xf0, 0xfe, 0xef, 0xc1, 0x38, 0xff, 0x9f, 0xc3, 0xd8, 0xff, 0x7f, 0xc3, 0xfc, 0xf8, 0xe3, 0xc7, 0x7c, 0xf7, 0xdd, 0xcf,
-    0xbe, 0xef, 0xbe, 0xcf, 0xfe, 0xff, 0xff, 0xcf, 0xef, 0xff, 0xff, 0xde, 0xe7, 0xff, 0xff, 0xdc, 0xeb, 0xff, 0xff, 0xda,
-    0xed, 0xff, 0xff, 0xd6, 0xee, 0xff, 0xff, 0xce, 0x36, 0x00, 0x80, 0xcd, 0xb8, 0xff, 0xbf, 0xc3, 0x7e, 0x00, 0xc0, 0xdf,
-    0x7c, 0x00, 0xc0, 0xcf, 0xfc, 0x00, 0xe0, 0xcf, 0xf8, 0x01, 0xf0, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
-    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
+const unsigned char question[] PROGMEM = {0xE0, 0x07, 0x10, 0x08, 0x08, 0x10, 0x88, 0x11, 0x48, 0x12, 0x48,
+                                          0x12, 0x48, 0x12, 0x30, 0x11, 0x80, 0x08, 0x40, 0x04, 0x40, 0x02,
+                                          0xC0, 0x03, 0x00, 0x00, 0xC0, 0x03, 0x40, 0x02, 0x80, 0x01};
 
-const unsigned char ROFL[] PROGMEM = {
-    0x00, 0x00, 0x00, 0xc0, 0x00, 0xfc, 0x07, 0xc0, 0x00, 0xff, 0x1f, 0xc0, 0x80, 0xff, 0x7f, 0xc0, 0xc0, 0xff, 0xff, 0xc0,
-    0xe0, 0x9f, 0xff, 0xc1, 0xf0, 0x9f, 0xff, 0xc0, 0xf8, 0x9f, 0x7f, 0xcb, 0xf8, 0x9f, 0xbf, 0xcb, 0xfc, 0x9f, 0xdf, 0xdb,
-    0xfc, 0x1f, 0x08, 0xdc, 0xfe, 0x1f, 0xf8, 0xfe, 0xfe, 0xff, 0xff, 0xfe, 0x1e, 0xf0, 0x7f, 0xfe, 0x1e, 0xf0, 0xbf, 0xfe,
-    0xfe, 0xf3, 0xdf, 0xfe, 0xfe, 0xf3, 0x6f, 0xfe, 0xfe, 0xf3, 0x37, 0xfe, 0xfe, 0xeb, 0x1b, 0xfe, 0xfc, 0xef, 0x0d, 0xde,
-    0xfc, 0xe7, 0x06, 0xcf, 0xf8, 0x6b, 0x83, 0xcf, 0xf8, 0x0d, 0xc0, 0xc7, 0xf0, 0xed, 0xff, 0xc7, 0xe0, 0xee, 0xff, 0xc3,
-    0xc0, 0xee, 0xff, 0xc1, 0x80, 0xee, 0xff, 0xc0, 0x00, 0xe6, 0x3f, 0xc0, 0x00, 0xf0, 0x0f, 0xc0, 0x00, 0x00, 0x00, 0xc0};
+const unsigned char bang[] PROGMEM = {0x30, 0x0C, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x48,
+                                      0x12, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x48, 0x12, 0x30, 0x0C,
+                                      0x00, 0x00, 0x30, 0x0C, 0x48, 0x12, 0x30, 0x0C, 0x00, 0x00};
 
-const unsigned char Smiling_Closed_Eyes[] PROGMEM = {
-    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0xff, 0xc0, 0xe0, 0xff, 0xff, 0xc1,
-    0xf0, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xcf, 0x7c, 0xfe, 0xcf, 0xcf, 0xfc, 0xfc, 0xe7, 0xcf,
-    0xfe, 0xf9, 0xf3, 0xdf, 0xfe, 0xf3, 0xf9, 0xdf, 0xff, 0xf9, 0xf3, 0xff, 0xff, 0xfc, 0xe7, 0xff, 0x7f, 0xfe, 0xcf, 0xff,
-    0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x80, 0xff, 0xbe, 0xff, 0xbf, 0xdf, 0x7e, 0x00, 0xc0, 0xdf,
-    0x7c, 0x00, 0xc0, 0xcf, 0xfc, 0x00, 0xe0, 0xcf, 0xf8, 0x01, 0xf0, 0xc7, 0xf8, 0x03, 0xf8, 0xc7, 0xf0, 0xff, 0xff, 0xc3,
-    0xe0, 0xff, 0xff, 0xc1, 0xc0, 0xff, 0xff, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
+const unsigned char haha[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+                                      0x4A, 0x0A, 0x50, 0x0E, 0x70, 0xF2, 0x4F, 0x12, 0x48, 0x32, 0x44,
+                                      0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char Grinning_SmilingEyes2[] PROGMEM = {
-    0x00, 0xf8, 0x03, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0xc0, 0xff, 0x7f, 0xc0, 0xe0, 0xff, 0xff, 0xc0,
-    0xf0, 0xff, 0xff, 0xc1, 0xf8, 0xff, 0xff, 0xc3, 0xf8, 0xff, 0xff, 0xc3, 0xfc, 0xf8, 0xe3, 0xc7, 0x7c, 0xf7, 0xdd, 0xc7,
-    0xbe, 0xef, 0xbe, 0xcf, 0xfe, 0xff, 0xff, 0xcf, 0xff, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff, 0xdf,
-    0xff, 0xff, 0xff, 0xdf, 0xff, 0xff, 0xff, 0xdf, 0x3f, 0x00, 0x80, 0xdf, 0xbe, 0xff, 0xbf, 0xcf, 0x7e, 0x00, 0xc0, 0xcf,
-    0x7c, 0x00, 0xc0, 0xc7, 0xfc, 0x00, 0xe0, 0xc7, 0xf8, 0x01, 0xf0, 0xc3, 0xf8, 0x03, 0xf8, 0xc3, 0xf0, 0xff, 0xff, 0xc1,
-    0xe0, 0xff, 0xff, 0xc0, 0xc0, 0xff, 0x7f, 0xc0, 0x80, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0};
+const unsigned char ROFL[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x84, 0x21, 0x84, 0x20, 0x02,
+                                      0x4C, 0x02, 0x4A, 0x1A, 0x49, 0x8A, 0x48, 0x42, 0x48, 0x22, 0x44,
+                                      0xE4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char wave_icon[] PROGMEM = {
-    0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x7f, 0xc0, 0x00, 0x00, 0xc0, 0xc1, 0x00, 0x00, 0x00, 0xc7,
-    0x00, 0x00, 0x1e, 0xcc, 0x00, 0x00, 0x30, 0xc8, 0x00, 0x00, 0x60, 0xd8, 0x00, 0x08, 0xc0, 0xd0, 0x00, 0x1a, 0x81, 0xd1,
-    0x00, 0x36, 0x03, 0xd3, 0x80, 0x6d, 0x06, 0xd2, 0x00, 0xdb, 0x0c, 0xc2, 0x80, 0xb6, 0x1d, 0xc0, 0x80, 0x6d, 0x1f, 0xc0,
-    0x00, 0xdb, 0x3f, 0xc0, 0x00, 0xf6, 0x7f, 0xc0, 0x00, 0xfc, 0x7f, 0xc0, 0x08, 0xf8, 0x7f, 0xc0, 0x48, 0xf0, 0x7f, 0xc0,
-    0x48, 0xe0, 0x7f, 0xc0, 0xc8, 0xc0, 0x3f, 0xc0, 0x98, 0x81, 0x1f, 0xc0, 0x10, 0x03, 0x00, 0xc0, 0x30, 0x0e, 0x00, 0xc0,
-    0x20, 0x38, 0x00, 0xc0, 0xe0, 0x00, 0x00, 0xc0, 0x80, 0x07, 0x00, 0xc0, 0x00, 0x1e, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0};
+const unsigned char Smiling_Closed_Eyes[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x42,
+                                                     0x42, 0x22, 0x44, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
+                                                     0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char cowboy[] PROGMEM = {
-    0x00, 0x0c, 0x0c, 0xc0, 0x00, 0x02, 0x10, 0xc0, 0x00, 0x01, 0x20, 0xc0, 0xbc, 0x00, 0x40, 0xcf, 0xc2, 0x01, 0xe0, 0xd0,
-    0x01, 0x01, 0x20, 0xe0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0,
-    0xc1, 0x3f, 0xff, 0xe0, 0xe1, 0xff, 0xff, 0xe1, 0xf2, 0xf3, 0xf3, 0xd3, 0xf4, 0xf1, 0xe3, 0xcb, 0xfc, 0xf1, 0xe3, 0xc7,
-    0xf8, 0xf1, 0xe3, 0xc7, 0xf8, 0xf1, 0xe3, 0xc7, 0xf8, 0xfb, 0xf7, 0xc7, 0xf8, 0xff, 0xff, 0xc7, 0xf8, 0xff, 0xff, 0xc7,
-    0x70, 0xf8, 0x8f, 0xc3, 0x70, 0x03, 0xb0, 0xc3, 0x70, 0xfe, 0xbf, 0xc3, 0x60, 0x00, 0x80, 0xc1, 0xc0, 0x00, 0xc0, 0xc0,
-    0x80, 0x01, 0x60, 0xc0, 0x00, 0x07, 0x38, 0xc0, 0x00, 0xfe, 0x1f, 0xc0, 0x00, 0xf0, 0x03, 0xc0, 0x00, 0x00, 0x00, 0xc0};
+const unsigned char Grinning_SmilingEyes2[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x24, 0x24, 0x52,
+                                                       0x4A, 0x02, 0x40, 0x02, 0x40, 0xF2, 0x4F, 0x12, 0x48, 0x22, 0x44,
+                                                       0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char deadmau5[] PROGMEM = {
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x07, 0x00,
-    0x00, 0xFC, 0x03, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x80, 0xFF, 0x0F, 0x00, 0xC0, 0xFF, 0xFF, 0x00, 0xE0, 0xFF, 0x3F, 0x00,
-    0xE0, 0xFF, 0xFF, 0x01, 0xF0, 0xFF, 0x7F, 0x00, 0xF0, 0xFF, 0xFF, 0x03, 0xF8, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x07,
-    0xFC, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0xFC, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0x0F, 0xFE, 0xFF, 0xFF, 0x00,
-    0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xE0, 0xFF, 0x3F, 0xFC,
-    0x0F, 0xFF, 0x7F, 0x00, 0xC0, 0xFF, 0x1F, 0xF8, 0x0F, 0xFC, 0x3F, 0x00, 0x80, 0xFF, 0x0F, 0xF8, 0x1F, 0xFC, 0x1F, 0x00,
-    0x00, 0xFF, 0x0F, 0xFC, 0x3F, 0xFC, 0x0F, 0x00, 0x00, 0xF8, 0x1F, 0xFF, 0xFF, 0xFE, 0x01, 0x00, 0x00, 0x00, 0xFC, 0xFF,
-    0xFF, 0x07, 0x00, 0x00, 0x00, 0x00, 0xFC, 0xFF, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00,
-    0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0xC0, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x80, 0x07, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
+const unsigned char Loudly_Crying_Face[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x34, 0x2C, 0x4A,
+                                                    0x52, 0x12, 0x48, 0x12, 0x48, 0x92, 0x49, 0x52, 0x4A, 0x52, 0x4A,
+                                                    0x54, 0x2A, 0x94, 0x29, 0x18, 0x18, 0xF0, 0x0F, 0x00, 0x00};
 
-const unsigned char sun[] PROGMEM = {
-    0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x30, 0xC0, 0x00, 0x03,
-    0x70, 0x00, 0x80, 0x03, 0xF0, 0x00, 0xC0, 0x03, 0xF0, 0xF8, 0xC7, 0x03, 0xE0, 0xFC, 0xCF, 0x01, 0x00, 0xFE, 0x1F, 0x00,
-    0x00, 0xFF, 0x3F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x8E, 0xFF, 0x7F, 0x1C, 0x9F, 0xFF, 0x7F, 0x3E,
-    0x9F, 0xFF, 0x7F, 0x3E, 0x8E, 0xFF, 0x7F, 0x1C, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0x3F, 0x00,
-    0x00, 0xFE, 0x1F, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0xC0, 0xF9, 0xE7, 0x00, 0xE0, 0x01, 0xE0, 0x01, 0xF0, 0x01, 0xE0, 0x03,
-    0xF0, 0xC0, 0xC0, 0x03, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xC0, 0x00, 0x00,
-};
+const unsigned char wave_icon[] PROGMEM = {0x00, 0x00, 0xC0, 0x18, 0x30, 0x21, 0x48, 0x5A, 0x94, 0x64, 0x24,
+                                           0x25, 0x4A, 0x24, 0x12, 0x44, 0x22, 0x44, 0x04, 0x40, 0x08, 0x40,
+                                           0x12, 0x40, 0x22, 0x20, 0xC4, 0x10, 0x18, 0x0F, 0x00, 0x00};
 
-const unsigned char rain[] PROGMEM = {
-    0xC0, 0x0F, 0xC0, 0x00, 0x40, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x03, 0x38, 0x00,
-    0x00, 0x0E, 0x0C, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00, 0x10, 0x03, 0x00, 0x00, 0x30, 0x01, 0x00, 0x00, 0x20,
-    0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x03, 0x00, 0x00, 0x30, 0x02, 0x00,
-    0x00, 0x10, 0x06, 0x00, 0x00, 0x08, 0xFC, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x01, 0x80, 0x00, 0x01, 0x00,
-    0xC0, 0xC0, 0x81, 0x03, 0xA0, 0x60, 0xC1, 0x03, 0x90, 0x20, 0x41, 0x01, 0xF0, 0xE0, 0xC0, 0x01, 0x60, 0x4C,
-    0x98, 0x00, 0x00, 0x0E, 0x1C, 0x00, 0x00, 0x0B, 0x12, 0x00, 0x00, 0x09, 0x1A, 0x00, 0x00, 0x06, 0x0E, 0x00,
-};
+const unsigned char cowboy[] PROGMEM = {0x70, 0x0E, 0x8F, 0xF1, 0x11, 0x88, 0x21, 0x84, 0xC2, 0x43, 0x1E,
+                                        0x78, 0xE2, 0x47, 0x42, 0x42, 0x12, 0x48, 0x12, 0x48, 0x22, 0x44,
+                                        0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
 
-const unsigned char cloud[] PROGMEM = {
-    0x00, 0x80, 0x07, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x00, 0x70, 0x30, 0x00, 0x00, 0x10, 0x60, 0x00, 0x80, 0x1F, 0x40, 0x00,
-    0xC0, 0x0F, 0xC0, 0x00, 0xC0, 0x00, 0x80, 0x00, 0x60, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x00, 0x20, 0x00, 0x80, 0x01,
-    0x20, 0x00, 0x00, 0x07, 0x38, 0x00, 0x00, 0x0C, 0x0C, 0x00, 0x00, 0x08, 0x06, 0x00, 0x00, 0x18, 0x02, 0x00, 0x00, 0x10,
-    0x02, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20,
-    0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0x10,
-    0x02, 0x00, 0x00, 0x10, 0x06, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, 0x0C, 0xFC, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x03,
-};
+const unsigned char deadmau5[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0xE4, 0x27, 0x12, 0x48, 0x0A,
+                                          0x50, 0x0E, 0x70, 0x11, 0x88, 0x19, 0x98, 0x19, 0x98, 0x19, 0x98,
+                                          0x19, 0x98, 0x19, 0x98, 0x11, 0x88, 0x0E, 0x70, 0x00, 0x00};
 
-const unsigned char fog[] PROGMEM = {
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x3C, 0x00, 0xFE, 0x01, 0xFF, 0x00, 0x87, 0xC7, 0xC3, 0x01, 0x03, 0xFE, 0x80, 0x01,
-    0x00, 0x38, 0x00, 0x00, 0xFC, 0x00, 0x7E, 0x00, 0xFF, 0x83, 0xFF, 0x01, 0x03, 0xFF, 0x81, 0x01, 0x00, 0x7C, 0x00, 0x00,
-    0xF8, 0x00, 0x3E, 0x00, 0xFE, 0x01, 0xFF, 0x00, 0x87, 0xC7, 0xC3, 0x01, 0x03, 0xFE, 0x80, 0x01, 0x00, 0x38, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
+const unsigned char sun[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0xEC, 0x37, 0xFC, 0x3F, 0xF8, 0x1F, 0xFC,
+                                     0x3F, 0xFE, 0x7F, 0xFC, 0x3F, 0xFC, 0x3F, 0xFE, 0x7F, 0xFC, 0x3F,
+                                     0xF8, 0x1F, 0xFC, 0x3F, 0xEC, 0x37, 0x80, 0x01, 0x00, 0x00};
 
-const unsigned char devil[] PROGMEM = {
-    0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x01, 0x00, 0x00, 0xe0, 0x03, 0x00, 0x00, 0xf0, 0x0f, 0xfc, 0x0f, 0xfc,
-    0x3f, 0xff, 0x3f, 0xff, 0xfe, 0xff, 0xff, 0xdf, 0xfe, 0xff, 0xff, 0xdf, 0xfe, 0xff, 0xff, 0xdf, 0xfc, 0xff, 0xff, 0xcf,
-    0xfc, 0xff, 0xff, 0xcf, 0xf8, 0xff, 0xff, 0xc7, 0xf0, 0xff, 0xff, 0xc3, 0xf0, 0xff, 0xff, 0xc3, 0xf0, 0xf1, 0xe3, 0xc3,
-    0xf0, 0xe7, 0xf9, 0xc3, 0xf0, 0xe7, 0xf9, 0xc3, 0xf0, 0xe3, 0xf1, 0xc3, 0xf0, 0xe3, 0xf1, 0xc3, 0xf0, 0xe7, 0xf9, 0xc3,
-    0xf0, 0xff, 0xff, 0xc3, 0xe0, 0xfd, 0xef, 0xc1, 0xe0, 0xf3, 0xf3, 0xc1, 0xc0, 0x07, 0xf8, 0xc0, 0x80, 0x1f, 0x7e, 0xc0,
-    0x00, 0xff, 0x3f, 0xc0, 0x00, 0xfe, 0x0f, 0xc0, 0x00, 0xf8, 0x03, 0xc0, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, 0xc0};
+const unsigned char rain[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x38, 0x1F, 0xFC, 0x3F, 0xFE,
+                                      0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0x00, 0x00, 0x48, 0x12,
+                                      0x48, 0x12, 0x24, 0x09, 0x24, 0x09, 0x00, 0x00, 0x00, 0x00};
 
-const unsigned char heart[] PROGMEM = {
-    0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0xF0, 0x00, 0xF8, 0x0F, 0xFC, 0x07, 0xFC, 0x1F, 0x06, 0x0E, 0xFE, 0x3F, 0x03, 0x18,
-    0xFE, 0xFF, 0x7F, 0x10, 0xFF, 0xFF, 0xFF, 0x31, 0xFF, 0xFF, 0xFF, 0x33, 0xFF, 0xFF, 0xFF, 0x37, 0xFF, 0xFF, 0xFF, 0x37,
-    0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFF, 0xFF, 0xFF, 0x3F, 0xFE, 0xFF, 0xFF, 0x1F, 0xFE, 0xFF, 0xFF, 0x1F,
-    0xFC, 0xFF, 0xFF, 0x0F, 0xFC, 0xFF, 0xFF, 0x0F, 0xF8, 0xFF, 0xFF, 0x07, 0xF0, 0xFF, 0xFF, 0x03, 0xF0, 0xFF, 0xFF, 0x03,
-    0xE0, 0xFF, 0xFF, 0x01, 0xC0, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x00, 0xFE, 0x1F, 0x00,
-    0x00, 0xFC, 0x0F, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x80, 0x00, 0x00,
-};
+const unsigned char cloud[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x38, 0x1F, 0xFC,
+                                       0x3F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0xF8, 0x1F,
+                                       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
 
-const unsigned char poo[] PROGMEM = {
-    0x00, 0x1c, 0x00, 0xc0, 0x00, 0x7c, 0x00, 0xc0, 0x00, 0xfc, 0x00, 0xc0, 0x00, 0x7c, 0x03, 0xc0, 0x00, 0xbe, 0x03, 0xc0,
-    0x00, 0xdf, 0x0f, 0xc0, 0x80, 0xcf, 0x0f, 0xc0, 0xc0, 0xf1, 0x0f, 0xc0, 0x60, 0xfc, 0x0f, 0xc0, 0x30, 0xff, 0x07, 0xc0,
-    0x90, 0xff, 0x3b, 0xc0, 0xc0, 0xff, 0x7d, 0xc0, 0xf8, 0xff, 0xfc, 0xc0, 0xf8, 0x3f, 0xf0, 0xc0, 0x78, 0x88, 0xc0, 0xc0,
-    0x20, 0xe3, 0x18, 0xc0, 0x98, 0xe7, 0xbc, 0xc1, 0x9c, 0x64, 0xa4, 0xc3, 0x9e, 0x64, 0xa4, 0xc7, 0xbe, 0xe4, 0xa4, 0xc7,
-    0xbc, 0x27, 0xbc, 0xc7, 0x38, 0x03, 0xd9, 0xc3, 0x00, 0xf0, 0x63, 0xc0, 0xf8, 0xfc, 0x3f, 0xcf, 0xfc, 0xff, 0x87, 0xdf,
-    0xfe, 0xff, 0xe0, 0xdf, 0xfc, 0x1f, 0xfe, 0xdf, 0xf8, 0x07, 0xf8, 0xcf, 0xf0, 0x03, 0xe0, 0xc7, 0x00, 0x00, 0x00, 0xc0};
+const unsigned char fog[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x88, 0x88, 0x54, 0x55, 0x22, 0x22, 0x00,
+                                     0x00, 0x44, 0x44, 0xAA, 0x2A, 0x11, 0x11, 0x00, 0x00, 0x88, 0x88,
+                                     0x54, 0x55, 0x22, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
 
-const unsigned char bell_icon[] PROGMEM = {
-    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b11110000,
-    0b00000011, 0b00000000, 0b00000000, 0b11111100, 0b00001111, 0b00000000, 0b00000000, 0b00001111, 0b00111100, 0b00000000,
-    0b00000000, 0b00000011, 0b00110000, 0b00000000, 0b10000000, 0b00000001, 0b01100000, 0b00000000, 0b11000000, 0b00000000,
-    0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000,
-    0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000,
-    0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b11000000, 0b00000000,
-    0b11000000, 0b00000000, 0b11000000, 0b00000000, 0b01000000, 0b00000000, 0b10000000, 0b00000000, 0b01100000, 0b00000000,
-    0b10000000, 0b00000001, 0b01110000, 0b00000000, 0b10000000, 0b00000011, 0b00110000, 0b00000000, 0b00000000, 0b00000011,
-    0b00011000, 0b00000000, 0b00000000, 0b00000110, 0b11110000, 0b11111111, 0b11111111, 0b00000011, 0b00000000, 0b00001100,
-    0b00001100, 0b00000000, 0b00000000, 0b00011000, 0b00000110, 0b00000000, 0b00000000, 0b11111000, 0b00000111, 0b00000000,
-    0b00000000, 0b11100000, 0b00000001, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000,
-    0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000, 0b00000000};
+const unsigned char devil[] PROGMEM = {0x06, 0x60, 0xCA, 0x53, 0x32, 0x4C, 0x22, 0x44, 0x44, 0x22, 0x3A,
+                                       0x5C, 0x32, 0x4C, 0x52, 0x4A, 0x72, 0x4E, 0x02, 0x40, 0x22, 0x44,
+                                       0xC4, 0x23, 0x04, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char heart[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x3C, 0x3C, 0x7E, 0x7E, 0xFE, 0x7F, 0xFE,
+                                       0x7F, 0xFE, 0x7F, 0xFE, 0x7F, 0xFC, 0x3F, 0xF8, 0x1F, 0xF8, 0x1F,
+                                       0xF0, 0x0F, 0xE0, 0x07, 0xC0, 0x03, 0x80, 0x01, 0x00, 0x00};
+
+const unsigned char poo[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0x40, 0x02, 0x20, 0x04, 0x10, 0x04, 0xF0,
+                                     0x08, 0x10, 0x10, 0x48, 0x12, 0x08, 0x18, 0xE8, 0x21, 0x1C, 0x40,
+                                     0x42, 0x42, 0x82, 0x41, 0x02, 0x30, 0xFC, 0x0F, 0x00, 0x00};
+
+const unsigned char bell_icon[] PROGMEM = {0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0xE0, 0x07, 0xF0, 0x0F, 0xF0,
+                                           0x0F, 0xF8, 0x1F, 0xF8, 0x1F, 0xF8, 0x1F, 0xF8, 0x1F, 0xFC, 0x3F,
+                                           0xFC, 0x3F, 0xFE, 0x7F, 0xFE, 0x7F, 0x80, 0x01, 0x00, 0x00};
+
+const unsigned char cookie[] PROGMEM = {0x00, 0x00, 0xE0, 0x07, 0x18, 0x18, 0x04, 0x20, 0x34, 0x22, 0x32,
+                                        0x40, 0x02, 0x58, 0x82, 0x5B, 0x92, 0x43, 0x82, 0x43, 0x02, 0x40,
+                                        0x64, 0x28, 0x64, 0x20, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char Fire[] PROGMEM = {0x30, 0x00, 0xF0, 0x00, 0xF8, 0x03, 0xF8, 0x07, 0xFC, 0x1F, 0xFC,
+                                      0x1F, 0xFE, 0x3E, 0x7E, 0x3E, 0x3E, 0x7C, 0x1E, 0x78, 0x1E, 0x70,
+                                      0x1C, 0x70, 0x1C, 0x70, 0x38, 0x38, 0x30, 0x38, 0x60, 0x0C};
+
+const unsigned char peace_sign[] PROGMEM = {0xC0, 0x30, 0x40, 0x29, 0x40, 0x25, 0x40, 0x15, 0x40, 0x12, 0x38,
+                                            0x0A, 0x54, 0x68, 0x54, 0x58, 0x54, 0x44, 0x3C, 0x22, 0x04, 0x22,
+                                            0x04, 0x12, 0x08, 0x10, 0x10, 0x08, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char Praying[] PROGMEM = {0x00, 0x00, 0x40, 0x02, 0xA0, 0x05, 0x90, 0x09, 0x90, 0x09, 0x90,
+                                         0x09, 0x98, 0x19, 0x94, 0x29, 0xA4, 0x25, 0xA4, 0x25, 0x84, 0x21,
+                                         0x84, 0x21, 0x86, 0x61, 0x4E, 0x72, 0x7F, 0x7E, 0x3F, 0xFC};
+
+const unsigned char Sparkles[] PROGMEM = {0x00, 0x00, 0x10, 0x00, 0x38, 0x04, 0x10, 0x04, 0x00, 0x0E, 0x00,
+                                          0x1F, 0x80, 0x3F, 0xE0, 0xFF, 0x80, 0x3F, 0x10, 0x1F, 0x10, 0x0E,
+                                          0x38, 0x04, 0xFE, 0x04, 0x38, 0x00, 0x10, 0x00, 0x10, 0x00};
+
+const unsigned char clown[] PROGMEM = {0x00, 0x00, 0xEE, 0x77, 0x1A, 0x58, 0x06, 0x60, 0x24, 0x24, 0x72,
+                                       0x4E, 0x22, 0x44, 0x82, 0x41, 0x82, 0x41, 0x1A, 0x58, 0xF2, 0x4F,
+                                       0x14, 0x28, 0xE4, 0x27, 0x18, 0x18, 0xE0, 0x07, 0x00, 0x00};
+
+const unsigned char robo[] PROGMEM = {0x80, 0x01, 0xC0, 0x03, 0x80, 0x01, 0xFC, 0x3F, 0x04, 0x20, 0x74,
+                                      0x2E, 0x52, 0x4A, 0x72, 0x4E, 0x02, 0x40, 0x02, 0x40, 0xA2, 0x4A,
+                                      0x52, 0x45, 0x04, 0x20, 0x04, 0x20, 0xFC, 0x3F, 0x00, 0x00};
+
+const unsigned char hole[] PROGMEM = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x3C, 0x3C,
+                                      0x06, 0x60, 0x0C, 0x30, 0xF0, 0x0F, 0x00, 0x00, 0x00, 0x00};
+
+const unsigned char bowling[] PROGMEM = {0x00, 0x38, 0x00, 0x44, 0x00, 0x44, 0x00, 0x44, 0x00, 0x28, 0x00,
+                                         0x38, 0x00, 0x28, 0x78, 0x44, 0x84, 0x82, 0x22, 0x83, 0x52, 0x83,
+                                         0x02, 0x83, 0x02, 0x45, 0x84, 0x44, 0x78, 0x38, 0x00, 0x00};
+
+const unsigned char vulcan_salute[] PROGMEM = {0x08, 0x02, 0x16, 0x0D, 0x15, 0x15, 0x15, 0x15, 0xA9, 0x12, 0x4A,
+                                               0x0A, 0x02, 0x38, 0x04, 0x48, 0x04, 0x44, 0x04, 0x22, 0x04, 0x22,
+                                               0x04, 0x12, 0x08, 0x10, 0x10, 0x08, 0xE0, 0x07, 0x00, 0x00};
 #endif
 
 } // namespace graphics
+#endif

src/graphics/emotes.h

@@ -17,98 +17,150 @@ extern const int numEmotes;
 
 #ifndef EXCLUDE_EMOJI
 // === Emote Bitmaps ===
-#define thumbs_height 25
-#define thumbs_width 25
+#define thumbs_height 16
+#define thumbs_width 16
 extern const unsigned char thumbup[] PROGMEM;
 extern const unsigned char thumbdown[] PROGMEM;
 
-#define Smiling_Eyes_height 30
-#define Smiling_Eyes_width 30
+#define Smiling_Eyes_height 16
+#define Smiling_Eyes_width 16
 extern const unsigned char Smiling_Eyes[] PROGMEM;
 
-#define Grinning_height 30
-#define Grinning_width 30
+#define Grinning_height 16
+#define Grinning_width 16
 extern const unsigned char Grinning[] PROGMEM;
 
-#define Slightly_Smiling_height 30
-#define Slightly_Smiling_width 30
+#define Slightly_Smiling_height 16
+#define Slightly_Smiling_width 16
 extern const unsigned char Slightly_Smiling[] PROGMEM;
 
-#define Winking_Face_height 30
-#define Winking_Face_width 30
+#define Winking_Face_height 16
+#define Winking_Face_width 16
 extern const unsigned char Winking_Face[] PROGMEM;
 
-#define Grinning_Smiling_Eyes_height 30
-#define Grinning_Smiling_Eyes_width 30
+#define Grinning_Smiling_Eyes_height 16
+#define Grinning_Smiling_Eyes_width 16
 extern const unsigned char Grinning_Smiling_Eyes[] PROGMEM;
 
-#define question_height 25
-#define question_width 25
+#define heart_smile_height 16
+#define heart_smile_width 16
+extern const unsigned char heart_smile[] PROGMEM;
+
+#define Heart_eyes_height 16
+#define Heart_eyes_width 16
+extern const unsigned char Heart_eyes[] PROGMEM;
+
+#define question_height 16
+#define question_width 16
 extern const unsigned char question[] PROGMEM;
 
-#define bang_height 30
-#define bang_width 30
+#define bang_height 16
+#define bang_width 16
 extern const unsigned char bang[] PROGMEM;
 
-#define haha_height 30
-#define haha_width 30
+#define haha_height 16
+#define haha_width 16
 extern const unsigned char haha[] PROGMEM;
 
-#define ROFL_height 30
-#define ROFL_width 30
+#define ROFL_height 16
+#define ROFL_width 16
 extern const unsigned char ROFL[] PROGMEM;
 
-#define Smiling_Closed_Eyes_height 30
-#define Smiling_Closed_Eyes_width 30
+#define Smiling_Closed_Eyes_height 16
+#define Smiling_Closed_Eyes_width 16
 extern const unsigned char Smiling_Closed_Eyes[] PROGMEM;
 
-#define Grinning_SmilingEyes2_height 30
-#define Grinning_SmilingEyes2_width 30
+#define Grinning_SmilingEyes2_height 16
+#define Grinning_SmilingEyes2_width 16
 extern const unsigned char Grinning_SmilingEyes2[] PROGMEM;
 
-#define wave_icon_height 30
-#define wave_icon_width 30
+#define Loudly_Crying_Face_height 16
+#define Loudly_Crying_Face_width 16
+extern const unsigned char Loudly_Crying_Face[] PROGMEM;
+
+#define wave_icon_height 16
+#define wave_icon_width 16
 extern const unsigned char wave_icon[] PROGMEM;
 
-#define cowboy_height 30
-#define cowboy_width 30
+#define cowboy_height 16
+#define cowboy_width 16
 extern const unsigned char cowboy[] PROGMEM;
 
-#define deadmau5_height 30
-#define deadmau5_width 60
+#define deadmau5_height 16
+#define deadmau5_width 16
 extern const unsigned char deadmau5[] PROGMEM;
 
-#define sun_height 30
-#define sun_width 30
+#define sun_height 16
+#define sun_width 16
 extern const unsigned char sun[] PROGMEM;
 
-#define rain_height 30
-#define rain_width 30
+#define rain_height 16
+#define rain_width 16
 extern const unsigned char rain[] PROGMEM;
 
-#define cloud_height 30
-#define cloud_width 30
+#define cloud_height 16
+#define cloud_width 16
 extern const unsigned char cloud[] PROGMEM;
 
-#define fog_height 25
-#define fog_width 25
+#define fog_height 16
+#define fog_width 16
 extern const unsigned char fog[] PROGMEM;
 
-#define devil_height 30
-#define devil_width 30
+#define devil_height 16
+#define devil_width 16
 extern const unsigned char devil[] PROGMEM;
 
-#define heart_height 30
-#define heart_width 30
+#define heart_height 16
+#define heart_width 16
 extern const unsigned char heart[] PROGMEM;
 
-#define poo_height 30
-#define poo_width 30
+#define poo_height 16
+#define poo_width 16
 extern const unsigned char poo[] PROGMEM;
 
-#define bell_icon_width 30
-#define bell_icon_height 30
+#define bell_icon_width 16
+#define bell_icon_height 16
 extern const unsigned char bell_icon[] PROGMEM;
+
+#define cookie_width 16
+#define cookie_height 16
+extern const unsigned char cookie[] PROGMEM;
+
+#define Fire_width 16
+#define Fire_height 16
+extern const unsigned char Fire[] PROGMEM;
+
+#define peace_sign_width 16
+#define peace_sign_height 16
+extern const unsigned char peace_sign[] PROGMEM;
+
+#define Praying_width 16
+#define Praying_height 16
+extern const unsigned char Praying[] PROGMEM;
+
+#define Sparkles_width 16
+#define Sparkles_height 16
+extern const unsigned char Sparkles[] PROGMEM;
+
+#define clown_width 16
+#define clown_height 16
+extern const unsigned char clown[] PROGMEM;
+
+#define robo_width 16
+#define robo_height 16
+extern const unsigned char robo[] PROGMEM;
+
+#define hole_width 16
+#define hole_height 16
+extern const unsigned char hole[] PROGMEM;
+
+#define bowling_width 16
+#define bowling_height 16
+extern const unsigned char bowling[] PROGMEM;
+
+#define vulcan_salute_width 16
+#define vulcan_salute_height 16
+extern const unsigned char vulcan_salute[] PROGMEM;
 #endif // EXCLUDE_EMOJI
 
 } // namespace graphics

src/graphics/images.h

@@ -360,6 +360,10 @@ const uint8_t chirpy_hirez[] = {
 #define chirpy_small_image_height 8
 const uint8_t chirpy_small[] = {0x7f, 0x41, 0x55, 0x55, 0x55, 0x55, 0x41, 0x7f};
 
+#define connection_icon_width 7
+#define connection_icon_height 5
+const uint8_t connection_icon[] = {0x36, 0x41, 0x5D, 0x41, 0x36};
+
 #ifdef M5STACK_UNITC6L
 #include "img/icon_small.xbm"
 #else

src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.cpp

@@ -13,45 +13,147 @@ void InkHUD::MapApplet::onRender()
         return;
     }
 
+    // Helper: draw rounded rectangle centered at x,y
+    auto fillRoundedRect = [&](int16_t cx, int16_t cy, int16_t w, int16_t h, int16_t r, uint16_t color) {
+        int16_t x = cx - (w / 2);
+        int16_t y = cy - (h / 2);
+
+        // center rects
+        fillRect(x + r, y, w - 2 * r, h, color);
+        fillRect(x, y + r, r, h - 2 * r, color);
+        fillRect(x + w - r, y + r, r, h - 2 * r, color);
+
+        // corners
+        fillCircle(x + r, y + r, r, color);
+        fillCircle(x + w - r - 1, y + r, r, color);
+        fillCircle(x + r, y + h - r - 1, r, color);
+        fillCircle(x + w - r - 1, y + h - r - 1, r, color);
+    };
+
     // Find center of map
-    // - latitude and longitude
-    // - will be placed at X(0.5), Y(0.5)
     getMapCenter(&latCenter, &lngCenter);
-
-    // Calculate North+East distance of each node to map center
-    // - which nodes to use controlled by virtual shouldDrawNode method
     calculateAllMarkers();
-
-    // Set the region shown on the map
-    // - default: fit all nodes, plus padding
-    // - maybe overriden by derived applet
-    // - getMapSize *sets* passed parameters (C-style)
     getMapSize(&widthMeters, &heightMeters);
-
-    // Set the metersToPx conversion value
     calculateMapScale();
 
-    // Special marker for own node
-    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
-    if (ourNode && nodeDB->hasValidPosition(ourNode))
-        drawLabeledMarker(ourNode);
-
-    // Draw all markers
+    // Draw all markers first
     for (Marker m : markers) {
         int16_t x = X(0.5) + (m.eastMeters * metersToPx);
         int16_t y = Y(0.5) - (m.northMeters * metersToPx);
 
-        // Cross Size
-        constexpr uint16_t csMin = 5;
-        constexpr uint16_t csMax = 12;
+        // Add white halo outline first
+        constexpr int outlinePad = 1;
+        int boxSize = 11;
+        int radius = 2; // rounded corner radius
 
-        // Too many hops away
-        if (m.hasHopsAway && m.hopsAway > config.lora.hop_limit) // Too many mops
-            printAt(x, y, "!", CENTER, MIDDLE);
-        else if (!m.hasHopsAway) // Unknown hops
-            drawCross(x, y, csMin);
-        else // The fewer hops, the larger the cross
-            drawCross(x, y, map(m.hopsAway, 0, config.lora.hop_limit, csMax, csMin));
+        // White halo background
+        fillRoundedRect(x, y, boxSize + (outlinePad * 2), boxSize + (outlinePad * 2), radius + 1, WHITE);
+
+        // Draw inner box
+        fillRoundedRect(x, y, boxSize, boxSize, radius, BLACK);
+
+        // Text inside
+        setFont(fontSmall);
+        setTextColor(WHITE);
+
+        // Draw actual marker on top
+        if (m.hasHopsAway && m.hopsAway > config.lora.hop_limit) {
+            printAt(x + 1, y + 1, "X", CENTER, MIDDLE);
+        } else if (!m.hasHopsAway) {
+            printAt(x + 1, y + 1, "?", CENTER, MIDDLE);
+        } else {
+            char hopStr[4];
+            snprintf(hopStr, sizeof(hopStr), "%d", m.hopsAway);
+            printAt(x, y + 1, hopStr, CENTER, MIDDLE);
+        }
+
+        // Restore default font and color
+        setFont(fontSmall);
+        setTextColor(BLACK);
+    }
+
+    // Dual map scale bars
+    int16_t horizPx = width() * 0.25f;
+    int16_t vertPx = height() * 0.25f;
+    float horizMeters = horizPx / metersToPx;
+    float vertMeters = vertPx / metersToPx;
+
+    auto formatDistance = [&](float meters, char *out, size_t len) {
+        if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
+            float feet = meters * 3.28084f;
+            if (feet < 528)
+                snprintf(out, len, "%.0f ft", feet);
+            else {
+                float miles = feet / 5280.0f;
+                snprintf(out, len, miles < 10 ? "%.1f mi" : "%.0f mi", miles);
+            }
+        } else {
+            if (meters >= 1000)
+                snprintf(out, len, "%.1f km", meters / 1000.0f);
+            else
+                snprintf(out, len, "%.0f m", meters);
+        }
+    };
+
+    // Horizontal scale bar
+    int16_t horizBarY = height() - 2;
+    int16_t horizBarX = 1;
+    drawLine(horizBarX, horizBarY, horizBarX + horizPx, horizBarY, BLACK);
+    drawLine(horizBarX, horizBarY - 3, horizBarX, horizBarY + 3, BLACK);
+    drawLine(horizBarX + horizPx, horizBarY - 3, horizBarX + horizPx, horizBarY + 3, BLACK);
+
+    char horizLabel[32];
+    formatDistance(horizMeters, horizLabel, sizeof(horizLabel));
+    int16_t horizLabelW = getTextWidth(horizLabel);
+    int16_t horizLabelH = getFont().lineHeight();
+    int16_t horizLabelX = horizBarX + horizPx + 4;
+    int16_t horizLabelY = horizBarY - horizLabelH + 1;
+    fillRect(horizLabelX - 2, horizLabelY - 1, horizLabelW + 4, horizLabelH + 2, WHITE);
+    printAt(horizLabelX, horizBarY, horizLabel, LEFT, BOTTOM);
+
+    // Vertical scale bar
+    int16_t vertBarX = 1;
+    int16_t vertBarBottom = horizBarY;
+    int16_t vertBarTop = vertBarBottom - vertPx;
+    drawLine(vertBarX, vertBarBottom, vertBarX, vertBarTop, BLACK);
+    drawLine(vertBarX - 3, vertBarBottom, vertBarX + 3, vertBarBottom, BLACK);
+    drawLine(vertBarX - 3, vertBarTop, vertBarX + 3, vertBarTop, BLACK);
+
+    char vertTopLabel[32];
+    formatDistance(vertMeters, vertTopLabel, sizeof(vertTopLabel));
+    int16_t topLabelY = vertBarTop - getFont().lineHeight() - 2;
+    int16_t topLabelW = getTextWidth(vertTopLabel);
+    int16_t topLabelH = getFont().lineHeight();
+    fillRect(vertBarX - 2, topLabelY - 1, topLabelW + 6, topLabelH + 2, WHITE);
+    printAt(vertBarX + (topLabelW / 2) + 1, topLabelY + (topLabelH / 2), vertTopLabel, CENTER, MIDDLE);
+
+    char vertBottomLabel[32];
+    formatDistance(vertMeters, vertBottomLabel, sizeof(vertBottomLabel));
+    int16_t bottomLabelY = vertBarBottom + 4;
+    int16_t bottomLabelW = getTextWidth(vertBottomLabel);
+    int16_t bottomLabelH = getFont().lineHeight();
+    fillRect(vertBarX - 2, bottomLabelY - 1, bottomLabelW + 6, bottomLabelH + 2, WHITE);
+    printAt(vertBarX + (bottomLabelW / 2) + 1, bottomLabelY + (bottomLabelH / 2), vertBottomLabel, CENTER, MIDDLE);
+
+    // Draw our node LAST with full white fill + outline
+    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+    if (ourNode && nodeDB->hasValidPosition(ourNode)) {
+        Marker self = calculateMarker(ourNode->position.latitude_i * 1e-7, ourNode->position.longitude_i * 1e-7, false, 0);
+
+        int16_t centerX = X(0.5) + (self.eastMeters * metersToPx);
+        int16_t centerY = Y(0.5) - (self.northMeters * metersToPx);
+
+        // White fill background + halo
+        fillCircle(centerX, centerY, 8, WHITE); // big white base
+        drawCircle(centerX, centerY, 8, WHITE); // crisp edge
+
+        // Black bullseye on top
+        drawCircle(centerX, centerY, 6, BLACK);
+        fillCircle(centerX, centerY, 2, BLACK);
+
+        // Crosshairs
+        drawLine(centerX - 8, centerY, centerX + 8, centerY, BLACK);
+        drawLine(centerX, centerY - 8, centerX, centerY + 8, BLACK);
     }
 }
 
@@ -63,6 +165,12 @@ void InkHUD::MapApplet::onRender()
 
 void InkHUD::MapApplet::getMapCenter(float *lat, float *lng)
 {
+    // If we have a valid position for our own node, use that as the anchor
+    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+    if (ourNode && nodeDB->hasValidPosition(ourNode)) {
+        *lat = ourNode->position.latitude_i * 1e-7;
+        *lng = ourNode->position.longitude_i * 1e-7;
+    } else {
         // Find mean lat long coords
         // ============================
         // - assigning X, Y and Z values to position on Earth's surface in 3D space, relative to center of planet
@@ -70,7 +178,8 @@ void InkHUD::MapApplet::getMapCenter(float *lat, float *lng)
         // - uses tan to find angles for lat / long degrees
         //   - longitude: triangle formed by x and y (on plane of the equator)
         //   - latitude: triangle formed by z (north south),
-    //     and the line along plane of equator which stretches from earth's axis to where point xyz intersects planet's surface
+        //     and the line along plane of equator which stretches from earth's axis to where point xyz intersects planet's
+        //     surface
 
         // Working totals, averaged after nodeDB processed
         uint32_t positionCount = 0;
@@ -155,24 +264,30 @@ void InkHUD::MapApplet::getMapCenter(float *lat, float *lng)
 
         float hypotenuse = sqrt((xAvg * xAvg) + (yAvg * yAvg)); // Distance from globe's north-south axis to surface intersect
         *lat = atan2(zAvg, hypotenuse) * RAD_TO_DEG;
+    }
+
+    // Use either our node position, or the mean fallback as the center
+    latCenter = *lat;
+    lngCenter = *lng;
 
     // ----------------------------------------------
-    // This has given us the "mean position"
-    // This will be a position *somewhere* near the center of our nodes.
-    // What we actually want is to place our center so that our outermost nodes end up on the border of our map.
-    // The only real use of our "mean position" is to give us a reference frame:
-    // which direction is east, and which is west.
+    // This has given us either:
+    // - our actual position (preferred), or
+    // - a mean position (fallback if we had no fix)
+    //
+    // What we actually want is to place our center so that our outermost nodes
+    // end up on the border of our map. The only real use of our "center" is to give
+    // us a reference frame: which direction is east, and which is west.
     //------------------------------------------------
 
-    // Find furthest nodes from "mean lat long"
+    // Find furthest nodes from our center
     // ========================================
-
     float northernmost = latCenter;
     float southernmost = latCenter;
     float easternmost = lngCenter;
     float westernmost = lngCenter;
 
-    for (uint8_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
+    for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
 
         // Skip if no position
@@ -184,14 +299,14 @@ void InkHUD::MapApplet::getMapCenter(float *lat, float *lng)
             continue;
 
         // Check for a new top or bottom latitude
-        float lat = node->position.latitude_i * 1e-7;
-        northernmost = max(northernmost, lat);
-        southernmost = min(southernmost, lat);
+        float latNode = node->position.latitude_i * 1e-7;
+        northernmost = max(northernmost, latNode);
+        southernmost = min(southernmost, latNode);
 
         // Longitude is trickier
-        float lng = node->position.longitude_i * 1e-7;
-        float degEastward = fmod(((lng - lngCenter) + 360), 360);      // Degrees traveled east from lngCenter to reach node
-        float degWestward = abs(fmod(((lng - lngCenter) - 360), 360)); // Degrees traveled west from lngCenter to reach node
+        float lngNode = node->position.longitude_i * 1e-7;
+        float degEastward = fmod(((lngNode - lngCenter) + 360), 360);      // Degrees traveled east from lngCenter to reach node
+        float degWestward = abs(fmod(((lngNode - lngCenter) - 360), 360)); // Degrees traveled west from lngCenter to reach node
         if (degEastward < degWestward)
             easternmost = max(easternmost, lngCenter + degEastward);
         else
@@ -250,7 +365,6 @@ InkHUD::MapApplet::Marker InkHUD::MapApplet::calculateMarker(float lat, float ln
     m.hopsAway = hopsAway;
     return m;
 }
-
 // Draw a marker on the map for a node, with a shortname label, and backing box
 void InkHUD::MapApplet::drawLabeledMarker(meshtastic_NodeInfoLite *node)
 {
@@ -324,6 +438,18 @@ void InkHUD::MapApplet::drawLabeledMarker(meshtastic_NodeInfoLite *node)
         textX = labelX + paddingW;
     }
 
+    // Prevent overlap with scale bars and their labels
+    // Define a "safe zone" in the bottom-left where the scale bars and text are drawn
+    constexpr int16_t safeZoneHeight = 28; // adjust based on your label font height
+    constexpr int16_t safeZoneWidth = 60;  // adjust based on horizontal label width zone
+    bool overlapsScale = (labelY + labelH > height() - safeZoneHeight) && (labelX < safeZoneWidth);
+
+    // If it overlaps, shift label upward slightly above the safe zone
+    if (overlapsScale) {
+        labelY = height() - safeZoneHeight - labelH - 2;
+        textY = labelY + (labelH / 2);
+    }
+
     // Backing box
     fillRect(labelX, labelY, labelW, labelH, WHITE);
     drawRect(labelX, labelY, labelW, labelH, BLACK);
@@ -348,8 +474,8 @@ void InkHUD::MapApplet::drawLabeledMarker(meshtastic_NodeInfoLite *node)
 // Need at least two, to draw a sensible map
 bool InkHUD::MapApplet::enoughMarkers()
 {
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
+    size_t count = 0;
+    for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
 
         // Count nodes

src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.cpp

@@ -127,6 +127,11 @@ void InkHUD::NodeListApplet::onRender()
     // Y value (top) of the current card. Increases as we draw.
     uint16_t cardTopY = headerDivY + padDivH;
 
+    // Clean up deleted nodes before drawing
+    cards.erase(
+        std::remove_if(cards.begin(), cards.end(), [](const CardInfo &c) { return nodeDB->getMeshNode(c.nodeNum) == nullptr; }),
+        cards.end());
+
     // -- Each node in list --
     for (auto card = cards.begin(); card != cards.end(); ++card) {
 
@@ -141,6 +146,11 @@ void InkHUD::NodeListApplet::onRender()
 
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeNum);
 
+        // Skip deleted nodes
+        if (!node) {
+            continue;
+        }
+
         // -- Shortname --
         // Parse special chars in the short name
         // Use "?" if unknown
@@ -188,7 +198,7 @@ void InkHUD::NodeListApplet::onRender()
             drawSignalIndicator(signalX, signalY, signalW, signalH, signal);
         }
         // Otherwise, print "hops away" info, if available
-        else if (hopsAway != CardInfo::HOPS_UNKNOWN) {
+        else if (hopsAway != CardInfo::HOPS_UNKNOWN && node) {
             std::string hopString = to_string(node->hops_away);
             hopString += " Hop";
             if (node->hops_away != 1)