ThinkNode G3, ETH support WIP

* Swap the GPS serial port pins.

* Trunk fixes

---------

Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.devcontainer/Dockerfile

@@ -1,7 +1,7 @@
 # trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
-FROM mcr.microsoft.com/devcontainers/cpp:2-debian-12
+FROM mcr.microsoft.com/devcontainers/cpp:2-debian-13
 
 USER root
 

.devcontainer/devcontainer.json

@@ -8,7 +8,7 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "3.13"
+      "version": "3.14"
     }
   },
   "customizations": {

.github/actions/build-variant/action.yml

@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v5
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v5
+      uses: actions/checkout@v6
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd
@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -22,7 +22,7 @@ jobs:
     outputs:
       artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,7 +56,7 @@ jobs:
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         id: upload
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip

.github/workflows/build_one_arch.yml

@@ -1,176 +0,0 @@
-name: Build One Arch
-
-on:
-  workflow_dispatch:
-    inputs:
-      # trunk-ignore(checkov/CKV_GHA_7)
-      arch:
-        type: choice
-        options:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - native
-
-permissions: read-all
-
-env:
-  INPUT_ARCH: ${{ github.event.inputs.arch }}
-
-jobs:
-  setup:
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
-          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
-    outputs:
-      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  build:
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix:
-        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.build.board }}
-      platform: ${{ matrix.build.arch }}
-
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
-    uses: ./.github/workflows/test_native.yml
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs: [version, build]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v5
-        with:
-          path: ./
-          pattern: firmware-${{inputs.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_one_target.yml

@@ -15,7 +15,6 @@ on:
           - rp2040
           - rp2350
           - stm32
-          - native
       target:
         type: string
         required: false
@@ -42,10 +41,9 @@ jobs:
           - rp2040
           - rp2350
           - stm32
-
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -60,13 +58,13 @@ jobs:
           echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
           echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
           echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -87,25 +85,6 @@ jobs:
       pio_env: ${{ inputs.target }}
       platform: ${{ inputs.arch }}
 
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
-    uses: ./.github/workflows/test_native.yml
-
   gather-artifacts:
     permissions:
       contents: write
@@ -114,12 +93,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-*-*
@@ -132,7 +111,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -148,7 +127,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -167,7 +146,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -35,7 +35,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -59,7 +59,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -81,7 +81,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -163,12 +163,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -181,7 +181,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -197,7 +197,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -216,7 +216,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -242,7 +242,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -261,14 +261,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -311,14 +311,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -335,7 +335,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -366,14 +366,14 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/merge_queue.yml

@@ -17,7 +17,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -40,7 +40,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -62,7 +62,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -142,12 +142,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +160,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -176,7 +176,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -195,7 +195,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -221,7 +221,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -240,14 +240,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -290,14 +290,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -314,7 +314,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -345,14 +345,14 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_tests.yml

@@ -40,7 +40,7 @@ jobs:
       checks: write
       pull-requests: write
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           submodules: recursive
 
@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true

.github/workflows/release_channels.yml

@@ -60,7 +60,10 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
+        with:
+          # Always use master branch for version bumps
+          ref: master
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       # step 2
       - name: full scan
@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: report.sarif
           overwrite: true

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           fetch-depth: 0
 

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -59,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -94,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
@@ -108,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,20 +137,20 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.1
+        uses: dorny/test-reporter@v2.2.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       # - uses: actions/setup-python@v5
       #   with:

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: true
 

.trunk/trunk.yaml

@@ -8,15 +8,15 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.486
-    - renovate@41.157.0
+    - checkov@3.2.492
+    - renovate@42.5.4
     - prettier@3.6.2
-    - trufflehog@3.90.11
+    - trufflehog@3.90.13
     - yamllint@1.37.1
     - bandit@1.8.6
     - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.1
+    - ruff@0.14.4
     - isort@7.0.0
     - markdownlint@0.45.0
     - oxipng@9.1.5
@@ -26,9 +26,9 @@ lint:
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.9.0
+    - black@25.11.0
     - git-diff-check
-    - gitleaks@8.28.0
+    - gitleaks@8.29.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

README.md

@@ -37,4 +37,3 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
-

alpine.Dockerfile

@@ -8,7 +8,8 @@ ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
 
 RUN apk --no-cache add \
-        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
+        bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
+        libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
         libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
@@ -40,8 +41,8 @@ LABEL org.opencontainers.image.title="Meshtastic" \
 USER root
 
 RUN apk --no-cache add \
-        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
-        libx11 libinput libxkbcommon \
+        shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
+        i2c-tools libuv libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

arch/nrf52/nrf52.ini

@@ -7,7 +7,7 @@ extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
   ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 

arch/nrf52/nrf52840.ini

@@ -8,7 +8,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/d3f6e339534233c7217818867368767590ce549e.zip
+  https://github.com/meshtastic/platform-native/archive/f566d364204416cdbf298e349213f7d551f793d9.zip
 framework = arduino
 
 build_src_filter = 

arch/stm32/stm32.ini

@@ -37,6 +37,9 @@ build_flags =
   -DRADIOLIB_EXCLUDE_LR11X0=1
   -DHAL_DAC_MODULE_ONLY
   -DHAL_RNG_MODULE_ENABLED
+  -Wl,--wrap=__assert_func
+  -Wl,--wrap=strerror
+  -Wl,--wrap=_tzset_unlocked_r
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>

bin/device-install.bat

@@ -15,12 +15,12 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv heltec-v4"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
 SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
 SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv heltec-v4"
 
 GOTO getopts
 :help

bin/device-install.sh

@@ -31,21 +31,23 @@ MUIDB_8MB=(
     "seeed-sensecap-indicator"
 )
 BIGDB_16MB=(
-    "t-deck"
-    "mesh-tab"
-    "t-energy-s3"
     "dreamcatcher"
-    "ESP32-S3-Pico"
-    "m5stack-cores3"
-    "station-g2"
-    "t-eth-elite"
-    "tlora-pager"
-    "t-watch-s3"
     "elecrow-adv"
+    "ESP32-S3-Pico"
+    "heltec-v4"
+    "m5stack-cores3"
+    "mesh-tab"
+    "station-g2"
+    "t-deck"
+    "t-energy-s3"
+    "t-eth-elite"
+    "t-watch-s3"
+    "tlora-pager"
 )
 S3_VARIANTS=(
     "s3"
     "-v3"
+    "-v4"
     "t-deck"
     "wireless-paper"
     "wireless-tracker"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,15 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.16" date="2025-11-19">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.16</url>
+    </release>
+    <release version="2.7.15" date="2025-11-13">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
+    </release>
+    <release version="2.7.14" date="2025-11-03">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.14</url>
+    </release>
     <release version="2.7.13" date="2025-10-11">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.13</url>
     </release>

boards/ThinkNode-M3.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_eink",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M3",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "elecrow nrf",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "",
+  "vendor": "ELECROW"
+}

boards/ThinkNode-M6.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M6 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_thinknode_m6",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M6",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "ELECROW ThinkNode M6",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.elecrow.com/thinknode-m6-outdoor-solar-power-for-lora-powered-by-nrf52840-supports-gps.html",
+  "vendor": "ELECROW"
+}

boards/muzi-base.json

@@ -0,0 +1,56 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_MUZI_BASE -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0xcafe"]],
+    "mcu": "nrf52840",
+    "variant": "muzi-base",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Muzi Base",
+  "url": "https://muzi.works/",
+  "vendor": "MuziWorks",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "blackmagic",
+      "cmsis-dap",
+      "mbed",
+      "stlink"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  }
+}

debian/changelog

@@ -1,3 +1,22 @@
+meshtasticd (2.7.16.0) unstable; urgency=medium
+
+  * Version 2.7.16
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 19 Nov 2025 16:12:32 +0000
+
+
+meshtasticd (2.7.15.0) unstable; urgency=medium
+
+  * Version 2.7.15
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 13 Nov 2025 12:31:57 +0000
+
+meshtasticd (2.7.14.0) unstable; urgency=medium
+
+  * Version 2.7.14
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 03 Nov 2025 16:11:31 +0000
+
 meshtasticd (2.7.13.0) unstable; urgency=medium
 
   * Version 2.7.13

debian/control

@@ -3,6 +3,7 @@ Section: misc
 Priority: optional
 Maintainer: Austin Lane <vidplace7@gmail.com>
 Build-Depends: debhelper-compat (= 13),
+               libc6-dev (>= 2.38) | libbsd-dev,
                lsb-release,
                tar,
                gzip,

meshtasticd.spec.rpkg

@@ -33,6 +33,7 @@ BuildRequires: python3dist(grpcio[protobuf])
 BuildRequires: python3dist(grpcio-tools)
 BuildRequires: git-core
 BuildRequires: gcc-c++
+BuildRequires: (glibc-devel >= 2.38) or pkgconfig(libbsd-overlay)
 BuildRequires: pkgconfig(yaml-cpp)
 BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)
@@ -49,6 +50,13 @@ BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
 
+# libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
+%if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
+BuildRequires: glibc-devel >= 2.38
+%else
+BuildRequires: pkgconfig(libbsd-overlay)
+%endif
+
 Requires:      systemd-udev
 
 %description

platformio.ini

@@ -62,7 +62,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -115,12 +115,13 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.3.0
+	# jgromes/RadioLib@7.4.0
+	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/19b7855e9a1d9deff37391659ca7194e4ef57c43.zip
+	https://github.com/meshtastic/device-ui/archive/28167c67dfd13015a0b5eef1828f95fe8e3ab7c3.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -176,11 +177,13 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
 	adafruit/Adafruit LTR390 Library@1.1.2
 	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.5
+	adafruit/Adafruit PCT2075@1.0.6
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
 	adafruit/Adafruit TSL2561@1.1.2
+	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/BH1750_WE@^1.1.10
+	wollewald/BH1750_WE@^1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]

src/DebugConfiguration.h

@@ -13,6 +13,11 @@ extern MemGet memGet;
 #define LED_STATE_ON 1
 #endif
 
+// WIFI LED
+#ifndef WIFI_STATE_ON
+#define WIFI_STATE_ON 1
+#endif
+
 // -----------------------------------------------------------------------------
 // DEBUG
 // -----------------------------------------------------------------------------
@@ -147,7 +152,9 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && defined(USE_CH390D)
+#include <ESP32_CH390.h>
+#elif HAS_ETHERNET && !defined(USE_WS5500)
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 

src/Power.cpp

@@ -194,7 +194,7 @@ static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level se
 
 #ifdef BATTERY_PIN
 
-static void adcEnable()
+void battery_adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -214,7 +214,7 @@ static void adcEnable()
 #endif
 }
 
-static void adcDisable()
+static void battery_adcDisable()
 {
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -278,6 +278,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 break;
             }
         }
+#if defined(BATTERY_CHARGING_INV)
+        // bit of trickery to show 99% up until the charge finishes
+        if (!digitalRead(BATTERY_CHARGING_INV) && battery_SOC > 99)
+            battery_SOC = 99;
+#endif
         return clamp((int)(battery_SOC), 0, 100);
     }
 
@@ -320,7 +325,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             uint32_t raw = 0;
             float scaled = 0;
 
-            adcEnable();
+            battery_adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
@@ -332,7 +337,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
-            adcDisable();
+            battery_adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -455,6 +460,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
+#elif defined(MUZI_BASE)
+        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -470,6 +477,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
+#elif defined(BATTERY_CHARGING_INV)
+        return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
@@ -702,7 +711,16 @@ bool Power::setup()
         },
         CHANGE);
 #endif
-
+#ifdef BATTERY_CHARGING_INV
+    attachInterrupt(
+        BATTERY_CHARGING_INV,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
+#endif
     enabled = found;
     low_voltage_counter = 0;
 
@@ -759,6 +777,8 @@ void Power::shutdown()
     if (screen) {
 #ifdef T_DECK_PRO
         screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
+#elif USE_EINK
+        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -839,8 +859,11 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
-    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
-              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+    if (millis() > lastLogTime + 50 * 1000) {
+        LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(),
+                  powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+        lastLogTime = millis();
+    }
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
@@ -903,13 +926,8 @@ void Power::readPowerStatus()
             low_voltage_counter++;
             LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
             if (low_voltage_counter > 10) {
-#ifdef ARCH_NRF52
-                // We can't trigger deep sleep on NRF52, it's freezing the board
-                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
-#else
                 LOG_INFO("Low voltage detected, trigger deep sleep");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
-#endif
             }
         } else {
             low_voltage_counter = 0;
@@ -1549,4 +1567,4 @@ bool Power::meshSolarInit()
 {
     return false;
 }
-#endif
+#endif

src/SerialConsole.cpp

@@ -50,6 +50,7 @@ void consolePrintf(const char *format, ...)
 
 SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), concurrency::OSThread("SerialConsole")
 {
+    api_type = TYPE_SERIAL;
     assert(!console);
     console = this;
     canWrite = false; // We don't send packets to our port until it has talked to us first

src/configuration.h

@@ -228,6 +228,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ICM20948_ADDR_ALT 0x68
 #define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
+#define DA217_ADDR 0x26
 
 // -----------------------------------------------------------------------------
 // LED
@@ -250,6 +251,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
 #define CST328_ADDR 0x1A
+#define CHSC6X_ADDR 0x2E
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -394,6 +396,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define HAS_RGB_LED
 #endif
 
+#ifndef LED_STATE_OFF
+#define LED_STATE_OFF 0
+#endif
+#ifndef LED_STATE_ON
+#define LED_STATE_ON 1
+#endif
+
 // default mapping of pins
 #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
 #define ALT_BUTTON_PIN PIN_BUTTON2

src/detect/ScanI2C.h

@@ -82,7 +82,10 @@ class ScanI2C
         BHI260AP,
         BMM150,
         TSL2561,
-        DRV2605
+        DRV2605,
+        BH1750,
+        DA217,
+        CHSC6X
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -106,6 +106,7 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
         if (i2cBus->available())
             i2cBus->read();
     }
+    LOG_DEBUG("Register value: 0x%x", value);
     return value;
 }
 
@@ -377,14 +378,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
-                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0x11f3 || registerValue == 0xe9c ||
-                    registerValue == 0xc8d) {
-                    type = SHT4X;
-                    logFoundDevice("SHT4X", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
+                if (registerValue == 0x5449) {
                     type = OPT3001;
                     logFoundDevice("OPT3001", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
+                    type = SHT4X;
+                    logFoundDevice("SHT4X", (uint8_t)addr.address);
                 } else {
                     type = SHT31;
                     logFoundDevice("SHT31", (uint8_t)addr.address);
@@ -465,8 +465,23 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
+            case TCA9555_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
+                if (registerValue == 0x13) {
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
+                    if (registerValue == 0x81) {
+                        type = DA217;
+                        logFoundDevice("DA217", (uint8_t)addr.address);
+                    } else {
+                        type = TCA9555;
+                        logFoundDevice("TCA9555", (uint8_t)addr.address);
+                    }
+                } else {
+                    type = TCA9555;
+                    logFoundDevice("TCA9555", (uint8_t)addr.address);
+                }
+                break;
             case TSL25911_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
                 if (registerValue == 0x50) {
@@ -485,7 +500,26 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
+            case LTR553ALS_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
+                if (registerValue == 0x92) {                                                       // LTR553ALS Part ID
+                    type = LTR553ALS;
+                    logFoundDevice("LTR553ALS", (uint8_t)addr.address);
+                } else {
+                    // Test BH1750 - send power on command
+                    i2cBus->beginTransmission(addr.address);
+                    i2cBus->write(0x01); // Power On command
+                    uint8_t bh1750_error = i2cBus->endTransmission();
+                    if (bh1750_error == 0) {
+                        type = BH1750;
+                        logFoundDevice("BH1750", (uint8_t)addr.address);
+                    } else {
+                        LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address);
+                    }
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
@@ -513,6 +547,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case ICM20948_ADDR:     // same as BMX160_ADDR
             case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
+#ifdef HAS_ICM20948
+                type = ICM20948;
+                logFoundDevice("ICM20948", (uint8_t)addr.address);
+                break;
+#endif
                 if (registerValue == 0xEA) {
                     type = ICM20948;
                     logFoundDevice("ICM20948", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -38,14 +38,16 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-#if defined(GPS_SERIAL_PORT)
-HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
-#else
-HardwareSerial *GPS::_serial_gps = &Serial1;
+#ifndef GPS_SERIAL_PORT
+#define GPS_SERIAL_PORT Serial1
 #endif
+
+#if defined(ARCH_NRF52)
+Uart *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#elif defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
 #elif defined(ARCH_RP2040)
-SerialUART *GPS::_serial_gps = &Serial1;
+SerialUART *GPS::_serial_gps = &GPS_SERIAL_PORT;
 #else
 HardwareSerial *GPS::_serial_gps = nullptr;
 #endif
@@ -240,6 +242,9 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
             buffer[bytesRead] = b;
             bytesRead++;
             if ((bytesRead == 767) || (b == '\r')) {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(debugmsg.c_str());
+#endif
                 if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
 #ifdef GPS_DEBUG
                     LOG_DEBUG("Found: %s", message); // Log the found message
@@ -247,9 +252,6 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
                     return GNSS_RESPONSE_OK;
                 } else {
                     bytesRead = 0;
-#ifdef GPS_DEBUG
-                    LOG_DEBUG(debugmsg.c_str());
-#endif
                 }
             }
         }
@@ -1275,6 +1277,24 @@ GnssModel_t GPS::probe(int serialSpeed)
         memset(&ublox_info, 0, sizeof(ublox_info));
         delay(100);
 
+#if defined(PIN_GPS_RESET) && PIN_GPS_RESET != -1
+        digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
+        delay(10);
+        digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
+
+        // attempt to detect the chip based on boot messages
+        std::vector<ChipInfo> passive_detect = {
+            {"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
+            {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
+            {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352},
+            {"UC6580", "UC6580", GNSS_MODEL_UC6580},
+            // as L76K is sort of a last ditch effort, we won't attempt to detect it by startup messages for now.
+            /*{"L76K", "SW=URANUS", GNSS_MODEL_MTK}*/};
+        GnssModel_t detectedDriver = getProbeResponse(500, passive_detect, serialSpeed);
+        if (detectedDriver != GNSS_MODEL_UNKNOWN) {
+            return detectedDriver;
+        }
+#endif
         // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
         _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
         delay(20);
@@ -1473,12 +1493,12 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
             }
 
             if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(response);
-#endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
                     if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
+#ifdef GPS_DEBUG
+                        LOG_DEBUG(response);
+#endif
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
                         delete[] response; // Cleanup before return
                         return chipInfo.driver;
@@ -1486,6 +1506,9 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
                 }
             }
             if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(response);
+#endif
                 // Reset the response buffer for the next potential message
                 responseLen = 0;
                 response[0] = '\0';
@@ -1504,10 +1527,7 @@ GPS *GPS::createGps()
     int8_t _rx_gpio = config.position.rx_gpio;
     int8_t _tx_gpio = config.position.tx_gpio;
     int8_t _en_gpio = config.position.gps_en_gpio;
-#if HAS_GPS && !defined(ARCH_ESP32)
-    _rx_gpio = 1; // We only specify GPS serial ports on ESP32. Otherwise, these are just flags.
-    _tx_gpio = 1;
-#endif
+
 #if defined(GPS_RX_PIN)
     if (!_rx_gpio)
         _rx_gpio = GPS_RX_PIN;
@@ -1572,8 +1592,6 @@ GPS *GPS::createGps()
 
 #ifdef PIN_GPS_RESET
     pinMode(PIN_GPS_RESET, OUTPUT);
-    digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
-    delay(10);
     digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
 
@@ -1583,16 +1601,28 @@ GPS *GPS::createGps()
         _serial_gps->setRxBufferSize(SERIAL_BUFFER_SIZE); // the default is 256
 #endif
 
-//  ESP32 has a special set of parameters vs other arduino ports
-#if defined(ARCH_ESP32)
         LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
         LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
+
+//  ESP32 has a special set of parameters vs other arduino ports
+#if defined(ARCH_ESP32)
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
 #elif defined(ARCH_RP2040)
+        _serial_gps->setPinout(new_gps->tx_gpio, new_gps->rx_gpio);
         _serial_gps->setFIFOSize(256);
         _serial_gps->begin(GPS_BAUDRATE);
-#else
+#elif defined(ARCH_NRF52)
+        _serial_gps->setPins(new_gps->rx_gpio, new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE);
+#elif defined(ARCH_STM32WL)
+        _serial_gps->setTx(new_gps->tx_gpio);
+        _serial_gps->setRx(new_gps->rx_gpio);
+        _serial_gps->begin(GPS_BAUDRATE);
+#elif defined(ARCH_PORTDUINO)
+        // Portduino can't set the GPS pins directly.
+        _serial_gps->begin(GPS_BAUDRATE);
+#else
+#error Unsupported architecture!
 #endif
     }
     return new_gps;
@@ -1659,8 +1689,12 @@ bool GPS::lookForLocation()
 
 #ifndef TINYGPS_OPTION_NO_STATISTICS
     if (reader.failedChecksum() > lastChecksumFailCount) {
-        LOG_WARN("%u new GPS checksum failures, for a total of %u", reader.failedChecksum() - lastChecksumFailCount,
-                 reader.failedChecksum());
+// In a GPS_DEBUG build we want to log all of these. In production, we only care if there are many of them.
+#ifndef GPS_DEBUG
+        if (reader.failedChecksum() > 4)
+#endif
+            LOG_WARN("%u new GPS checksum failures, for a total of %u", reader.failedChecksum() - lastChecksumFailCount,
+                     reader.failedChecksum());
         lastChecksumFailCount = reader.failedChecksum();
     }
 #endif

src/gps/GPS.h

@@ -194,6 +194,8 @@ class GPS : private concurrency::OSThread
     /** If !NULL we will use this serial port to construct our GPS */
 #if defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
+#elif defined(ARCH_NRF52)
+    static Uart *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
 #endif

src/gps/RTC.cpp

@@ -112,7 +112,11 @@ RTCSetResult readFromRTC()
 #elif defined(RX8130CE_RTC)
     if (rtc_found.address == RX8130CE_RTC) {
         uint32_t now = millis();
+#ifdef MUZI_BASE
+        ArtronShop_RX8130CE rtc(&Wire1);
+#else
         ArtronShop_RX8130CE rtc(&Wire);
+#endif
         tm t;
         if (rtc.getTime(&t)) {
             tv.tv_sec = gm_mktime(&t);
@@ -245,7 +249,11 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
         }
 #elif defined(RX8130CE_RTC)
         if (rtc_found.address == RX8130CE_RTC) {
+#ifdef MUZI_BASE
+            ArtronShop_RX8130CE rtc(&Wire1);
+#else
             ArtronShop_RX8130CE rtc(&Wire);
+#endif
             tm *t = gmtime(&tv->tv_sec);
             if (rtc.setTime(*t)) {
                 LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,
@@ -310,7 +318,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
 #ifdef BUILD_EPOCH
     if (tv.tv_sec < BUILD_EPOCH) {
         if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+            LOG_WARN("Ignore time (%lu) before build epoch (%lu)!", printableEpoch, BUILD_EPOCH);
             lastTimeValidationWarning = millis();
         }
         return RTCSetResultInvalidTime;
@@ -319,7 +327,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
             // Calculate max allowed time safely to avoid overflow in logging
             uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
             uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
+            LOG_WARN("Ignore time (%lu) too far in the future (build epoch: %lu, max allowed: %lu)!", printableEpoch,
                      (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
             lastTimeValidationWarning = millis();
         }

src/graphics/Screen.cpp

@@ -435,6 +435,14 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
 
+#if defined(MUZI_BASE)
+            dispdev->init();
+            dispdev->setBrightness(brightness);
+            dispdev->flipScreenVertically();
+            dispdev->resetDisplay();
+            digitalWrite(SCREEN_12V_ENABLE, HIGH);
+            delay(100);
+#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -443,7 +451,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             if (uiconfig.screen_brightness == 1)
                 digitalWrite(PIN_EINK_EN, HIGH);
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1)
+            if (uiconfig.screen_brightness > 0)
                 io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
 #endif
 
@@ -484,6 +492,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOff();
+
+#ifdef SCREEN_12V_ENABLE
+            digitalWrite(SCREEN_12V_ENABLE, LOW);
+#endif
 #ifdef USE_ST7789
             SPI1.end();
 #if defined(ARCH_ESP32)
@@ -534,7 +546,7 @@ void Screen::setup()
         static_cast<AutoOLEDWire *>(dispdev)->setDetected(model);
 #endif
 
-#ifdef USE_SH1107_128_64
+#if defined(USE_SH1107_128_64) || defined(USE_SH1107)
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
@@ -542,6 +554,9 @@ void Screen::setup()
     // Apply custom RGB color (e.g. Heltec T114/T190)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #endif
+#if defined(MUZI_BASE)
+    dispdev->delayPoweron = true;
+#endif
 
     // === Initialize display and UI system ===
     ui->init();

src/graphics/Screen.h

@@ -249,6 +249,8 @@ class Screen : public concurrency::OSThread
 
     bool isOverlayBannerShowing();
 
+    bool isScreenOn() { return screenOn; }
+
     // Stores the last 4 of our hardware ID, to make finding the device for pairing easier
     // FIXME: Needs refactoring and getMacAddr needs to be moved to a utility class
     char ourId[5];

src/graphics/SharedUIDisplay.cpp

@@ -1,6 +1,8 @@
 #include "configuration.h"
 #if HAS_SCREEN
+#include "MeshService.h"
 #include "RTC.h"
+#include "draw/NodeListRenderer.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
 #include "graphics/draw/UIRenderer.h"
@@ -398,6 +400,43 @@ const int *getTextPositions(OLEDDisplay *display)
     return textPositions;
 }
 
+// *************************
+// * Common Footer Drawing *
+// *************************
+void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y)
+{
+    bool drawConnectionState = false;
+    if (service->api_state == service->STATE_BLE || service->api_state == service->STATE_WIFI ||
+        service->api_state == service->STATE_SERIAL || service->api_state == service->STATE_PACKET ||
+        service->api_state == service->STATE_HTTP || service->api_state == service->STATE_ETH) {
+        drawConnectionState = true;
+    }
+
+    if (drawConnectionState) {
+        if (isHighResolution) {
+            const int scale = 2;
+            const int bytesPerRow = (connection_icon_width + 7) / 8;
+            int iconX = 0;
+            int iconY = SCREEN_HEIGHT - (connection_icon_height * 2);
+
+            for (int yy = 0; yy < connection_icon_height; ++yy) {
+                const uint8_t *rowPtr = connection_icon + yy * bytesPerRow;
+                for (int xx = 0; xx < connection_icon_width; ++xx) {
+                    const uint8_t byteVal = pgm_read_byte(rowPtr + (xx >> 3));
+                    const uint8_t bitMask = 1U << (xx & 7); // XBM is LSB-first
+                    if (byteVal & bitMask) {
+                        display->fillRect(iconX + xx * scale, iconY + yy * scale, scale, scale);
+                    }
+                }
+            }
+
+        } else {
+            display->drawXbm(0, SCREEN_HEIGHT - connection_icon_height, connection_icon_width, connection_icon_height,
+                             connection_icon);
+        }
+    }
+}
+
 bool isAllowedPunctuation(char c)
 {
     const std::string allowed = ".,!?;:-_()[]{}'\"@#$/\\&+=%~^ ";

src/graphics/SharedUIDisplay.h

@@ -52,6 +52,9 @@ void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w,
 void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr = "", bool force_no_invert = false,
                       bool show_date = false);
 
+// Shared battery/time/mail header
+void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y);
+
 const int *getTextPositions(OLEDDisplay *display);
 
 bool isAllowedPunctuation(char c);

src/graphics/TFTDisplay.cpp

@@ -422,7 +422,57 @@ static LGFX *tft = nullptr;
 
 #elif defined(ST7789_CS)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+#ifdef HELTEC_V4_TFT
+#include "chsc6x.h"
+#include "lgfx/v1/Touch.hpp"
+namespace lgfx
+{
+inline namespace v1
+{
+class TOUCH_CHSC6X : public ITouch
+{
+  public:
+    TOUCH_CHSC6X(void)
+    {
+        _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+        _cfg.x_min = 0;
+        _cfg.x_max = 240;
+        _cfg.y_min = 0;
+        _cfg.y_max = 320;
+    };
 
+    bool init(void) override
+    {
+        if (chsc6xTouch == nullptr) {
+            chsc6xTouch = new chsc6x(&Wire1, TOUCH_SDA_PIN, TOUCH_SCL_PIN, TOUCH_INT_PIN, TOUCH_RST_PIN);
+        }
+        chsc6xTouch->chsc6x_init();
+        return true;
+    };
+
+    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override
+    {
+        uint16_t raw_x, raw_y;
+        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y) == 0) {
+            tp[0].x = 320 - 1 - raw_y;
+            tp[0].y = 240 - 1 - raw_x;
+            tp[0].size = 1;
+            tp[0].id = 1;
+            return 1;
+        }
+        tp[0].size = 0;
+        return 0;
+    };
+
+    void wakeup(void) override{};
+    void sleep(void) override{};
+
+  private:
+    chsc6x *chsc6xTouch = nullptr;
+};
+} // namespace v1
+} // namespace lgfx
+#endif
 class LGFX : public lgfx::LGFX_Device
 {
     lgfx::Panel_ST7789 _panel_instance;
@@ -431,6 +481,8 @@ class LGFX : public lgfx::LGFX_Device
 #if HAS_TOUCHSCREEN
 #if defined(T_WATCH_S3) || defined(ELECROW)
     lgfx::Touch_FT5x06 _touch_instance;
+#elif defined(HELTEC_V4_TFT)
+    lgfx::TOUCH_CHSC6X _touch_instance;
 #else
     lgfx::Touch_GT911 _touch_instance;
 #endif
@@ -464,9 +516,9 @@ class LGFX : public lgfx::LGFX_Device
         {                                        // Set the display panel control.
             auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
 
-            cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = -1;       // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = -1;      // Pin number where BUSY is connected (-1 = disable)
+            cfg.pin_cs = ST7789_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7789_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7789_BUSY; // Pin number where BUSY is connected (-1 = disable)
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.

src/graphics/TimeFormatters.cpp

@@ -101,3 +101,23 @@ void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength)
     else
         snprintf(timeStr, maxLength, "unknown age");
 }
+
+void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs)
+{
+    uint32_t days = uptimeMillis / 86400000;
+    uint32_t hours = (uptimeMillis % 86400000) / 3600000;
+    uint32_t mins = (uptimeMillis % 3600000) / 60000;
+    uint32_t secs = (uptimeMillis % 60000) / 1000;
+
+    if (days) {
+        snprintf(uptimeStr, maxLength, "%s: %ud %uh", prefix, days, hours);
+    } else if (hours) {
+        snprintf(uptimeStr, maxLength, "%s: %uh %um", prefix, hours, mins);
+    } else if (!includeSecs) {
+        snprintf(uptimeStr, maxLength, "%s: %um", prefix, mins);
+    } else if (mins) {
+        snprintf(uptimeStr, maxLength, "%s: %um %us", prefix, mins, secs);
+    } else {
+        snprintf(uptimeStr, maxLength, "%s: %us", prefix, secs);
+    }
+}

src/graphics/TimeFormatters.h

@@ -24,3 +24,10 @@ bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int
  * @param maxLength Maximum length of the resulting string buffer
  */
 void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength);
+
+/**
+ * Get a compact human-readable string that only shows the largest non-zero time components.
+ * For example, 0 days 1 hour 2 minutes will display as "1h 2m" but 1 day 2 hours 3 minutes
+ * will display as "1d 2h".
+ */
+void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs = false);

src/graphics/draw/ClockRenderer.cpp

@@ -194,17 +194,12 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     graphics::drawCommonHeader(display, x, y, titleStr, true, true);
     int line = 0;
 
-#ifdef T_WATCH_S3
-    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
-        graphics::ClockRenderer::drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
-    }
-#endif
-
     uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
     char timeString[16];
     int hour = 0;
     int minute = 0;
     int second = 0;
+
     if (rtc_sec > 0) {
         long hms = rtc_sec % SEC_PER_DAY;
         hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
@@ -215,11 +210,11 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     bool isPM = hour >= 12;
-    // hour = hour > 12 ? hour - 12 : hour;
     if (config.display.use_12h_clock) {
         hour %= 12;
-        if (hour == 0)
+        if (hour == 0) {
             hour = 12;
+        }
         snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
     } else {
         snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
@@ -229,24 +224,56 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     char secondString[8];
     snprintf(secondString, sizeof(secondString), "%02d", second);
 
-#ifdef T_WATCH_S3
-    float scale = 1.5;
-#elif defined(CHATTER_2)
-    float scale = 1.1;
-#else
-    float scale = 0.75;
-    if (isHighResolution) {
-        scale = 1.5;
-    }
-#endif
+    static bool scaleInitialized = false;
+    static float scale = 0.75f;
+    static float segmentWidth = SEGMENT_WIDTH * 0.75f;
+    static float segmentHeight = SEGMENT_HEIGHT * 0.75f;
 
-    uint16_t segmentWidth = SEGMENT_WIDTH * scale;
-    uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
+    if (!scaleInitialized) {
+        float screenwidth_target_ratio = 0.80f; // Target 80% of display width (adjustable)
+        float max_scale = 3.5f;                 // Safety limit to avoid runaway scaling
+        float step = 0.05f;                     // Step increment per iteration
+
+        float target_width = display->getWidth() * screenwidth_target_ratio;
+        float target_height =
+            display->getHeight() -
+            (isHighResolution
+                 ? 46
+                 : 33); // Be careful adjusting this number, we have to account for header and the text under the time
+
+        float calculated_width_size = 0.0f;
+        float calculated_height_size = 0.0f;
+
+        while (true) {
+            segmentWidth = SEGMENT_WIDTH * scale;
+            segmentHeight = SEGMENT_HEIGHT * scale;
+
+            calculated_width_size = segmentHeight + ((segmentWidth + (segmentHeight * 2) + 4) * 4);
+            calculated_height_size = segmentHeight + ((segmentHeight + (segmentHeight * 2) + 4) * 2);
+
+            if (calculated_width_size >= target_width || calculated_height_size >= target_height || scale >= max_scale) {
+                break;
+            }
+
+            scale += step;
+        }
+
+        // If we overshot width, back off one step and recompute segment sizes
+        if (calculated_width_size > target_width || calculated_height_size > target_height) {
+            scale -= step;
+            segmentWidth = SEGMENT_WIDTH * scale;
+            segmentHeight = SEGMENT_HEIGHT * scale;
+        }
+
+        scaleInitialized = true;
+    }
+
+    size_t len = strlen(timeString);
 
     // calculate hours:minutes string width
-    uint16_t timeStringWidth = strlen(timeString) * 5;
+    uint16_t timeStringWidth = len * 5; // base spacing between characters
 
-    for (uint8_t i = 0; i < strlen(timeString); i++) {
+    for (size_t i = 0; i < len; i++) {
         char character = timeString[i];
 
         if (character == ':') {
@@ -257,19 +284,21 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     uint16_t hourMinuteTextX = (display->getWidth() / 2) - (timeStringWidth / 2);
-
     uint16_t startingHourMinuteTextX = hourMinuteTextX;
 
-    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2);
+    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2) + 2;
 
     // iterate over characters in hours:minutes string and draw segmented characters
-    for (uint8_t i = 0; i < strlen(timeString); i++) {
+    for (size_t i = 0; i < len; i++) {
         char character = timeString[i];
 
         if (character == ':') {
             drawSegmentedDisplayColon(display, hourMinuteTextX, hourMinuteTextY, scale);
 
             hourMinuteTextX += segmentHeight + 6;
+            if (scale >= 2.0f) {
+                hourMinuteTextX += (uint16_t)(4.5f * scale);
+            }
         } else {
             drawSegmentedDisplayCharacter(display, hourMinuteTextX, hourMinuteTextY, character - '0', scale);
 
@@ -279,34 +308,27 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
         hourMinuteTextX += 5;
     }
 
-    // draw seconds string
+    // draw seconds string + AM/PM
     display->setFont(FONT_SMALL);
     int xOffset = (isHighResolution) ? 0 : -1;
     if (hour >= 10) {
         xOffset += (isHighResolution) ? 32 : 18;
     }
-    int yOffset = (isHighResolution) ? 3 : 1;
-#ifdef SENSECAP_INDICATOR
-    yOffset -= 3;
-#endif
-#ifdef T_DECK
-    yOffset -= 5;
-#endif
+
     if (config.display.use_12h_clock) {
-        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
-                            isPM ? "pm" : "am");
+        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - 1, isPM ? "pm" : "am");
     }
 
 #ifndef USE_EINK
     xOffset = (isHighResolution) ? 18 : 10;
-    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - yOffset,
+    if (scale >= 2.0f) {
+        xOffset -= (int)(4.5f * scale);
+    }
+    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - 1,
                         secondString);
 #endif
-}
 
-void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y)
-{
-    display->drawFastImage(x, y, 18, 14, bluetoothConnectedIcon);
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // Draw an analog clock
@@ -319,11 +341,6 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     graphics::drawCommonHeader(display, x, y, titleStr, true, true);
     int line = 0;
 
-#ifdef T_WATCH_S3
-    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
-        drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
-    }
-#endif
     // clock face center coordinates
     int16_t centerX = display->getWidth() / 2;
     int16_t centerY = display->getHeight() / 2;
@@ -516,6 +533,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         display->drawLine(centerX, centerY, secondX, secondY);
 #endif
     }
+    graphics::drawCommonFooter(display, x, y);
 }
 
 } // namespace ClockRenderer

src/graphics/draw/ClockRenderer.h

@@ -24,7 +24,6 @@ void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int heig
 
 // UI elements for clock displays
 // void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode = true, float scale = 1);
-void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y);
 
 } // namespace ClockRenderer
 

src/graphics/draw/DebugRenderer.cpp

@@ -3,6 +3,7 @@
 #include "../Screen.h"
 #include "DebugRenderer.h"
 #include "FSCommon.h"
+#include "MeshService.h"
 #include "NodeDB.h"
 #include "Throttle.h"
 #include "UIRenderer.h"
@@ -10,6 +11,7 @@
 #include "gps/RTC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "mesh/Channels.h"
@@ -223,6 +225,8 @@ void drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, i
 
     display->drawString(x, getTextPositions(display)[line++], "URL: http://meshtastic.local");
 
+    graphics::drawCommonFooter(display, x, y);
+
     /* Display a heartbeat pixel that blinks every time the frame is redrawn */
 #ifdef SHOW_REDRAWS
     if (heartbeat)
@@ -503,6 +507,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[line++],
                         chUtilPercentage);
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -642,27 +647,48 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
 
-    display->drawString(nameX, getTextPositions(display)[line], appversionstr);
-#if !defined(M5STACK_UNITC6L)
-    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line < 4)) { // Only show uptime if the screen can show it
-        line += 1;
+    display->drawString(nameX, getTextPositions(display)[line++], appversionstr);
+
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show uptime if the screen can show it
         char uptimeStr[32] = "";
-        uint32_t uptime = millis() / 1000;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
+        getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
         textWidth = display->getStringWidth(uptimeStr);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
-        display->drawString(nameX, getTextPositions(display)[line], uptimeStr);
+        display->drawString(nameX, getTextPositions(display)[line++], uptimeStr);
     }
-#endif
+
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show API state if the screen can show it
+        char api_state[32] = "";
+        const char *clientWord = nullptr;
+
+        // Determine if narrow or wide screen
+        if (isHighResolution) {
+            clientWord = "Client";
+        } else {
+            clientWord = "App";
+        }
+        snprintf(api_state, sizeof(api_state), "No %ss Connected", clientWord);
+
+        if (service->api_state == service->STATE_BLE) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (BLE)", clientWord);
+        } else if (service->api_state == service->STATE_WIFI) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (WiFi)", clientWord);
+        } else if (service->api_state == service->STATE_SERIAL) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Serial)", clientWord);
+        } else if (service->api_state == service->STATE_PACKET) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Internal)", clientWord);
+        } else if (service->api_state == service->STATE_HTTP) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (HTTP)", clientWord);
+        } else if (service->api_state == service->STATE_ETH) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Ethernet)", clientWord);
+        }
+        if (api_state[0] != '\0') {
+            display->drawString((SCREEN_WIDTH - display->getStringWidth(api_state)) / 2, getTextPositions(display)[line++],
+                                api_state);
+        }
+    }
+
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -694,4 +720,4 @@ void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int1
 
 } // namespace DebugRenderer
 } // namespace graphics
-#endif
+#endif

src/graphics/draw/MenuHandler.cpp

@@ -119,6 +119,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             auto changes = SEGMENT_CONFIG;
 
             // This is needed as we wait til picking the LoRa region to generate keys for the first time.
+#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
             if (!owner.is_licensed) {
                 bool keygenSuccess = false;
                 if (config.security.private_key.size == 32) {
@@ -139,6 +140,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                     memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
                 }
             }
+#endif
             config.lora.tx_enabled = true;
             initRegion();
             if (myRegion->dutyCycle < 100) {
@@ -515,7 +517,7 @@ void menuHandler::homeBaseMenu()
             }
             saveUIConfig();
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1) {
+            if (uiconfig.screen_brightness > 0) {
                 uiconfig.screen_brightness = 0;
                 io.digitalWrite(PCA_PIN_EINK_EN, LOW);
             } else {
@@ -574,21 +576,16 @@ void menuHandler::textMessageBaseMenu()
 
 void menuHandler::systemBaseMenu()
 {
-    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, FrameToggles, Test, enumEnd };
+    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, Test, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
     optionsArray[options] = "Notifications";
     optionsEnumArray[options++] = Notifications;
-#if defined(ST7789_CS) || defined(ST7796_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) ||              \
-    defined(USE_SH1107) || defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
-    optionsArray[options] = "Screen Options";
+    optionsArray[options] = "Display Options";
     optionsEnumArray[options++] = ScreenOptions;
-#endif
 
-    optionsArray[options] = "Frame Visiblity Toggle";
-    optionsEnumArray[options++] = FrameToggles;
 #if defined(M5STACK_UNITC6L)
     optionsArray[options] = "Bluetooth";
 #else
@@ -626,9 +623,6 @@ void menuHandler::systemBaseMenu()
         } else if (selected == PowerMenu) {
             menuHandler::menuQueue = menuHandler::power_menu;
             screen->runNow();
-        } else if (selected == FrameToggles) {
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
         } else if (selected == Test) {
             menuHandler::menuQueue = menuHandler::test_menu;
             screen->runNow();
@@ -784,22 +778,30 @@ void menuHandler::nodeNameLengthMenu()
             screen->runNow();
         }
     };
+    bannerOptions.InitialSelected = config.display.use_long_node_name == true ? 1 : 2;
     screen->showOverlayBanner(bannerOptions);
 }
 
 void menuHandler::resetNodeDBMenu()
 {
-    static const char *optionsArray[] = {"Back", "Confirm"};
+    static const char *optionsArray[] = {"Back", "Reset All", "Preserve Favorites"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Confirm Reset NodeDB";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
+    bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == 1 || selected == 2) {
             disableBluetooth();
+            screen->setFrames(Screen::FOCUS_DEFAULT);
+        }
+        if (selected == 1) {
             LOG_INFO("Initiate node-db reset");
             nodeDB->resetNodes();
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+        } else if (selected == 2) {
+            LOG_INFO("Initiate node-db reset but keeping favorites");
+            nodeDB->resetNodes(1);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -935,7 +937,9 @@ void menuHandler::BluetoothToggleMenu()
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1 || selected == 2) {
+        if (selected == 0)
+            return;
+        else if (selected != (config.bluetooth.enabled ? 1 : 2)) {
             InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
         }
@@ -1329,7 +1333,7 @@ void menuHandler::screenOptionsMenu()
     hasSupportBrightness = false;
 #endif
 
-    enum optionsNumbers { Back, NodeNameLength, Brightness, ScreenColor };
+    enum optionsNumbers { Back, NodeNameLength, Brightness, ScreenColor, FrameToggles, DisplayUnits };
     static const char *optionsArray[5] = {"Back"};
     static int optionsEnumArray[5] = {Back};
     int options = 1;
@@ -1351,8 +1355,14 @@ void menuHandler::screenOptionsMenu()
     optionsEnumArray[options++] = ScreenColor;
 #endif
 
+    optionsArray[options] = "Frame Visibility Toggle";
+    optionsEnumArray[options++] = FrameToggles;
+
+    optionsArray[options] = "Display Units";
+    optionsEnumArray[options++] = DisplayUnits;
+
     BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Screen Options";
+    bannerOptions.message = "Display Options";
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
@@ -1366,6 +1376,12 @@ void menuHandler::screenOptionsMenu()
         } else if (selected == NodeNameLength) {
             menuHandler::menuQueue = menuHandler::node_name_length_menu;
             screen->runNow();
+        } else if (selected == FrameToggles) {
+            menuHandler::menuQueue = menuHandler::FrameToggles;
+            screen->runNow();
+        } else if (selected == DisplayUnits) {
+            menuHandler::menuQueue = menuHandler::DisplayUnits;
+            screen->runNow();
         } else {
             menuQueue = system_base_menu;
             screen->runNow();
@@ -1577,6 +1593,34 @@ void menuHandler::FrameToggles_menu()
     screen->showOverlayBanner(bannerOptions);
 }
 
+void menuHandler::DisplayUnits_menu()
+{
+    enum optionsNumbers { Back, MetricUnits, ImperialUnits };
+
+    static const char *optionsArray[] = {"Back", "Metric", "Imperial"};
+    BannerOverlayOptions bannerOptions;
+    bannerOptions.message = " Select display units";
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = 3;
+    if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL)
+        bannerOptions.InitialSelected = 2;
+    else
+        bannerOptions.InitialSelected = 1;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        if (selected == MetricUnits) {
+            config.display.units = meshtastic_Config_DisplayConfig_DisplayUnits_METRIC;
+            service->reloadConfig(SEGMENT_CONFIG);
+        } else if (selected == ImperialUnits) {
+            config.display.units = meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL;
+            service->reloadConfig(SEGMENT_CONFIG);
+        } else {
+            menuHandler::menuQueue = menuHandler::screen_options_menu;
+            screen->runNow();
+        }
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
 void menuHandler::handleMenuSwitch(OLEDDisplay *display)
 {
     if (menuQueue != menu_none)
@@ -1691,6 +1735,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case FrameToggles:
         FrameToggles_menu();
         break;
+    case DisplayUnits:
+        DisplayUnits_menu();
+        break;
     case throttle_message:
         screen->showSimpleBanner("Too Many Attempts\nTry again in 60 seconds.", 5000);
         break;
@@ -1705,4 +1752,4 @@ void menuHandler::saveUIConfig()
 
 } // namespace graphics
 
-#endif
+#endif

src/graphics/draw/MenuHandler.h

@@ -44,7 +44,8 @@ class menuHandler
         trace_route_menu,
         throttle_message,
         node_name_length_menu,
-        FrameToggles
+        FrameToggles,
+        DisplayUnits
     };
     static screenMenus menuQueue;
 
@@ -88,6 +89,7 @@ class menuHandler
     static void powerMenu();
     static void nodeNameLengthMenu();
     static void FrameToggles_menu();
+    static void DisplayUnits_menu();
     static void textMessageMenu();
 
   private:

src/graphics/draw/MessageRenderer.cpp

@@ -213,6 +213,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #else
         display->drawString(center_text, getTextPositions(display)[2], messageString);
 #endif
+        graphics::drawCommonFooter(display, x, y);
         return;
     }
 
@@ -423,6 +424,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // Draw header at the end to sort out overlapping elements
     graphics::drawCommonHeader(display, x, y, titleStr);
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerStr, const char *messageBuf, int textWidth)

src/graphics/draw/NodeListRenderer.cpp

@@ -53,7 +53,7 @@ static int scrollIndex = 0;
 // Utility Functions
 // =============================
 
-const char *getSafeNodeName(meshtastic_NodeInfoLite *node)
+const char *getSafeNodeName(OLEDDisplay *display, meshtastic_NodeInfoLite *node)
 {
     const char *name = NULL;
     static char nodeName[16] = "?";
@@ -81,6 +81,28 @@ const char *getSafeNodeName(meshtastic_NodeInfoLite *node)
         snprintf(nodeName, sizeof(nodeName), "(%04X)", (uint16_t)(node->num & 0xFFFF));
     }
 
+    if (config.display.use_long_node_name == true) {
+        int availWidth = (SCREEN_WIDTH / 2) - 65;
+        if (availWidth < 0)
+            availWidth = 0;
+
+        size_t origLen = strlen(nodeName);
+        while (nodeName[0] && display->getStringWidth(nodeName) > availWidth) {
+            nodeName[strlen(nodeName) - 1] = '\0';
+        }
+
+        // If we actually truncated, append "..." (ensure space remains in buffer)
+        if (strlen(nodeName) < origLen) {
+            size_t len = strlen(nodeName);
+            size_t maxLen = sizeof(nodeName) - 4; // 3 for "..." and 1 for '\0'
+            if (len > maxLen) {
+                nodeName[maxLen] = '\0';
+                len = maxLen;
+            }
+            strcat(nodeName, "...");
+        }
+    }
+
     return nodeName;
 }
 
@@ -147,7 +169,7 @@ void drawEntryLastHeard(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
     bool isLeftCol = (x < SCREEN_WIDTH / 2);
     int timeOffset = (isHighResolution) ? (isLeftCol ? 7 : 10) : (isLeftCol ? 3 : 7);
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
 
     char timeStr[10];
     uint32_t seconds = sinceLastSeen(node);
@@ -192,7 +214,7 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
 
     int barsXOffset = columnWidth - barsOffset;
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -236,7 +258,7 @@ void drawNodeDistance(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     bool isLeftCol = (x < SCREEN_WIDTH / 2);
     int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
     char distStr[10] = "";
 
     meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
@@ -331,7 +353,7 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     // Adjust max text width depending on column and screen width
     int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -362,11 +384,11 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     float bearing = GeoCoord::bearing(userLat, userLon, nodeLat, nodeLon);
     float bearingToNode = RAD_TO_DEG * bearing;
     float relativeBearing = fmod((bearingToNode - myHeading + 360), 360);
-    float angle = relativeBearing * DEG_TO_RAD;
     // Shrink size by 2px
     int size = FONT_HEIGHT_SMALL - 5;
     CompassRenderer::drawArrowToNode(display, centerX, centerY, size, relativeBearing);
     /*
+    float angle = relativeBearing * DEG_TO_RAD;
     float halfSize = size / 2.0;
 
     // Point of the arrow
@@ -403,6 +425,12 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 {
     const int COMMON_HEADER_HEIGHT = FONT_HEIGHT_SMALL - 1;
     const int rowYOffset = FONT_HEIGHT_SMALL - 3;
+    bool locationScreen = false;
+
+    if (strcmp(title, "Bearings") == 0)
+        locationScreen = true;
+    else if (strcmp(title, "Distance") == 0)
+        locationScreen = true;
 #if defined(M5STACK_UNITC6L)
     int columnWidth = display->getWidth();
 #else
@@ -418,7 +446,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 
     int totalEntries = nodeDB->getNumMeshNodes();
     int totalRowsAvailable = (display->getHeight() - y) / rowYOffset;
-
+    int numskipped = 0;
     int visibleNodeRows = totalRowsAvailable;
 #if defined(M5STACK_UNITC6L)
     int totalColumns = 1;
@@ -438,6 +466,10 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     int rowCount = 0;
 
     for (int i = startIndex; i < endIndex; ++i) {
+        if (locationScreen && !nodeDB->getMeshNodeByIndex(i)->has_position) {
+            numskipped++;
+            continue;
+        }
         int xPos = x + (col * columnWidth);
         int yPos = y + yOffset;
         renderer(display, nodeDB->getMeshNodeByIndex(i), xPos, yPos, columnWidth);
@@ -460,6 +492,9 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
         }
     }
 
+    // This should correct the scrollbar
+    totalEntries -= numskipped;
+
 #if !defined(M5STACK_UNITC6L)
     // Draw column separator
     if (shownCount > 0) {
@@ -470,6 +505,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 #endif
     const int scrollStartY = y + 3;
     drawScrollbar(display, visibleNodeRows, totalEntries, scrollIndex, 2, scrollStartY);
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // =============================

src/graphics/draw/UIRenderer.cpp

@@ -11,6 +11,7 @@
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "target_specific.h"
@@ -383,17 +384,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
     // === 4. Uptime (only show if metric is present) ===
     char uptimeStr[32] = "";
     if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
-        uint32_t uptime = node->device_metrics.uptime_seconds;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
+        getUptimeStr(node->device_metrics.uptime_seconds * 1000, " Up", uptimeStr, sizeof(uptimeStr));
     }
     if (uptimeStr[0] && line < 5) {
         display->drawString(x, getTextPositions(display)[line++], uptimeStr);
@@ -552,6 +543,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
         // else show nothing
     }
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -591,18 +583,8 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     drawNodes(display, x + 1, getTextPositions(display)[line] + 2, nodeStatus, -1, false, "online");
 #endif
     char uptimeStr[32] = "";
-    uint32_t uptime = millis() / 1000;
-    uint32_t days = uptime / 86400;
-    uint32_t hours = (uptime % 86400) / 3600;
-    uint32_t mins = (uptime % 3600) / 60;
-    // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
 #if !defined(M5STACK_UNITC6L)
-    if (days)
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %ud %uh", days, hours);
-    else if (hours)
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %uh %um", hours, mins);
-    else
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %um", mins);
+    getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
 #endif
     display->drawString(SCREEN_WIDTH - display->getStringWidth(uptimeStr), getTextPositions(display)[line++], uptimeStr);
 
@@ -771,6 +753,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
         display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
     }
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // Start Functions to write date/time to the screen
@@ -1046,36 +1029,17 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0) {
         // === Second Row: Last GPS Fix ===
         if (gpsStatus->getLastFixMillis() > 0) {
-            uint32_t delta = (millis() - gpsStatus->getLastFixMillis()) / 1000; // seconds since last fix
-            uint32_t days = delta / 86400;
-            uint32_t hours = (delta % 86400) / 3600;
-            uint32_t mins = (delta % 3600) / 60;
-            uint32_t secs = delta % 60;
-
-            char buf[32];
+            uint32_t delta = millis() - gpsStatus->getLastFixMillis();
+            char uptimeStr[32];
 #if defined(USE_EINK)
             // E-Ink: skip seconds, show only days/hours/mins
-            if (days > 0) {
-                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
-            } else if (hours > 0) {
-                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
-            } else {
-                snprintf(buf, sizeof(buf), "Last: %um", mins);
-            }
+            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), false);
 #else
             // Non E-Ink: include seconds where useful
-            if (days > 0) {
-                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
-            } else if (hours > 0) {
-                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
-            } else if (mins > 0) {
-                snprintf(buf, sizeof(buf), "Last: %um %us", mins, secs);
-            } else {
-                snprintf(buf, sizeof(buf), "Last: %us", secs);
-            }
+            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), true);
 #endif
 
-            display->drawString(0, getTextPositions(display)[line++], buf);
+            display->drawString(0, getTextPositions(display)[line++], uptimeStr);
         } else {
             display->drawString(0, getTextPositions(display)[line++], "Last: ?");
         }
@@ -1183,6 +1147,7 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     }
 #endif
 #endif // HAS_GPS
+    graphics::drawCommonFooter(display, x, y);
 }
 
 #ifdef USERPREFS_OEM_TEXT
@@ -1267,7 +1232,13 @@ void UIRenderer::drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *sta
     if (totalIcons == 0)
         return;
 
-    const size_t iconsPerPage = (SCREEN_WIDTH + spacing) / (iconSize + spacing);
+    const int navPadding = isHighResolution ? 24 : 12; // padding per side
+
+    int usableWidth = SCREEN_WIDTH - (navPadding * 2);
+    if (usableWidth < iconSize)
+        usableWidth = iconSize;
+
+    const size_t iconsPerPage = usableWidth / (iconSize + spacing);
     const size_t currentPage = currentFrame / iconsPerPage;
     const size_t pageStart = currentPage * iconsPerPage;
     const size_t pageEnd = min(pageStart + iconsPerPage, totalIcons);
@@ -1338,6 +1309,47 @@ void UIRenderer::drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *sta
             display->setColor(WHITE);
         }
     }
+
+    // Compact arrow drawer
+    auto drawArrow = [&](bool rightSide) {
+        display->setColor(WHITE);
+
+        const int offset = isHighResolution ? 3 : 1;
+        const int halfH = rectHeight / 2;
+
+        const int top = (y - 2) + (rectHeight - halfH) / 2;
+        const int bottom = top + halfH - 1;
+        const int midY = top + (halfH / 2);
+
+        const int maxW = 4;
+
+        // Determine left X coordinate
+        int baseX = rightSide ? (rectX + rectWidth + offset) : // right arrow
+                        (rectX - offset - 1);                  // left arrow
+
+        for (int yy = top; yy <= bottom; yy++) {
+            int dist = abs(yy - midY);
+            int lineW = maxW - (dist * maxW / (halfH / 2));
+            if (lineW < 1)
+                lineW = 1;
+
+            if (rightSide) {
+                display->drawHorizontalLine(baseX, yy, lineW);
+            } else {
+                display->drawHorizontalLine(baseX - lineW + 1, yy, lineW);
+            }
+        }
+    };
+    // Right arrow
+    if (pageEnd < totalIcons) {
+        drawArrow(true);
+    }
+
+    // Left arrow
+    if (pageStart > 0) {
+        drawArrow(false);
+    }
+
     // Knock the corners off the square
     display->setColor(BLACK);
     display->drawRect(rectX, y - 2, 1, 1);
@@ -1372,4 +1384,4 @@ std::string UIRenderer::drawTimeDelta(uint32_t days, uint32_t hours, uint32_t mi
 
 } // namespace graphics
 
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/images.h

@@ -360,6 +360,10 @@ const uint8_t chirpy_hirez[] = {
 #define chirpy_small_image_height 8
 const uint8_t chirpy_small[] = {0x7f, 0x41, 0x55, 0x55, 0x55, 0x55, 0x41, 0x7f};
 
+#define connection_icon_width 7
+#define connection_icon_height 5
+const uint8_t connection_icon[] = {0x36, 0x41, 0x5D, 0x41, 0x36};
+
 #ifdef M5STACK_UNITC6L
 #include "img/icon_small.xbm"
 #else

src/graphics/niche/README.md

@@ -5,7 +5,6 @@ A pattern / collection of resources for creating custom UIs, to target small gro
 For an example, see the `heltec-vision-master-e290-inkhud` platformio env.
 
 - platformio.ini
-
   - suppress default Meshtastic components (Screen, ButtonThread, etc)
   - define `MESHTASTIC_INCLUDE_NICHE_GRAPHICS`
   - (possibly) Edit `build_src_filter` to include our new nicheGraphics.h file

src/input/InputBroker.cpp

@@ -1,11 +1,13 @@
 #include "InputBroker.h"
 #include "PowerFSM.h" // needed for event trigger
+#include "configuration.h"
+#include "modules/ExternalNotificationModule.h"
 
 InputBroker *inputBroker = nullptr;
 
 InputBroker::InputBroker()
 {
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
     inputEventQueue = xQueueCreate(5, sizeof(InputEvent));
     pollSoonQueue = xQueueCreate(5, sizeof(InputPollable *));
     xTaskCreate(pollSoonWorker, "input-pollSoon", 2 * 1024, this, 10, &pollSoonTask);
@@ -17,7 +19,7 @@ void InputBroker::registerSource(Observable<const InputEvent *> *source)
     this->inputEventObserver.observe(source);
 }
 
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
 void InputBroker::requestPollSoon(InputPollable *pollable)
 {
     if (xPortInIsrContext() == pdTRUE) {
@@ -48,11 +50,17 @@ void InputBroker::processInputEventQueue()
 int InputBroker::handleInputEvent(const InputEvent *event)
 {
     powerFSM.trigger(EVENT_INPUT); // todo: not every input should wake, like long hold release
+
+    if (event && event->inputEvent != INPUT_BROKER_NONE && externalNotificationModule &&
+        moduleConfig.external_notification.enabled && externalNotificationModule->nagging()) {
+        externalNotificationModule->stopNow();
+    }
+
     this->notifyObservers(event);
     return 0;
 }
 
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
 void InputBroker::pollSoonWorker(void *p)
 {
     InputBroker *instance = (InputBroker *)p;

src/input/InputBroker.h

@@ -59,7 +59,7 @@ class InputBroker : public Observable<const InputEvent *>
     InputBroker();
     void registerSource(Observable<const InputEvent *> *source);
     void injectInputEvent(const InputEvent *event) { handleInputEvent(event); }
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
     void requestPollSoon(InputPollable *pollable);
     void queueInputEvent(const InputEvent *event);
     void processInputEventQueue();
@@ -69,7 +69,7 @@ class InputBroker : public Observable<const InputEvent *>
     int handleInputEvent(const InputEvent *event);
 
   private:
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
     QueueHandle_t inputEventQueue;
     QueueHandle_t pollSoonQueue;
     TaskHandle_t pollSoonTask;

src/input/TDeckProKeyboard.cpp

@@ -57,7 +57,7 @@ static unsigned char TDeckProTapMap[_TCA8418_NUM_KEYS][5] = {
     {0x00, 0x00, 0x00},
     {0x00, 0x00, 0x00},
     {0x20, 0x00, 0x00},
-    {0x00, 0x00, 0x00},
+    {0x00, 0x00, '0'},
     {0x00, 0x00, 0x00} // R_Shift, sym, space, mic, L_Shift
 };
 

src/main.cpp

@@ -330,7 +330,7 @@ void setup()
 
 #ifdef WIFI_LED
     pinMode(WIFI_LED, OUTPUT);
-    digitalWrite(WIFI_LED, LOW);
+    digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
 
 #ifdef BLE_LED
@@ -477,6 +477,10 @@ void setup()
 #ifdef RESET_OLED
     pinMode(RESET_OLED, OUTPUT);
     digitalWrite(RESET_OLED, 1);
+    delay(2);
+    digitalWrite(RESET_OLED, 0);
+    delay(10);
+    digitalWrite(RESET_OLED, 1);
 #endif
 
 #ifdef SENSOR_POWER_CTRL_PIN
@@ -959,6 +963,7 @@ void setup()
     i2cScanner.reset();
 #endif
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
     // warn the user about a low entropy key
     if (nodeDB->keyIsLowEntropy && !nodeDB->hasWarned) {
         LOG_WARN(LOW_ENTROPY_WARNING);
@@ -969,6 +974,7 @@ void setup()
         service->sendClientNotification(cn);
         nodeDB->hasWarned = true;
     }
+#endif
 
 // buttons are now inputBroker, so have to come after setupModules
 #if HAS_BUTTON
@@ -1401,7 +1407,7 @@ void setup()
 #endif
 
     // check if the radio chip matches the selected region
-    if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && (!rIf->wideLora())) {
+    if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && rIf && (!rIf->wideLora())) {
         LOG_WARN("LoRa chip does not support 2.4GHz. Revert to unset");
         config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
         nodeDB->saveToDisk(SEGMENT_CONFIG);
@@ -1595,7 +1601,7 @@ void loop()
 #endif
 
     service->loop();
-#if !MESHTASTIC_EXCLUDE_INPUTBROKER && defined(HAS_FREE_RTOS)
+#if !MESHTASTIC_EXCLUDE_INPUTBROKER && defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
     if (inputBroker)
         inputBroker->processInputEventQueue();
 #endif

src/mesh/CryptoEngine.cpp

@@ -92,10 +92,10 @@ bool CryptoEngine::encryptCurve25519(uint32_t toNode, uint32_t fromNode, meshtas
         LOG_DEBUG("Node %d or their public_key not found", toNode);
         return false;
     }
-    if (!crypto->setDHPublicKey(remotePublic.bytes)) {
+    if (!setDHPublicKey(remotePublic.bytes)) {
         return false;
     }
-    crypto->hash(shared_key, 32);
+    hash(shared_key, 32);
     initNonce(fromNode, packetNum, extraNonceTmp);
 
     // Calculate the shared secret with the destination node and encrypt
@@ -134,10 +134,10 @@ bool CryptoEngine::decryptCurve25519(uint32_t fromNode, meshtastic_UserLite_publ
     }
 
     // Calculate the shared secret with the sending node and decrypt
-    if (!crypto->setDHPublicKey(remotePublic.bytes)) {
+    if (!setDHPublicKey(remotePublic.bytes)) {
         return false;
     }
-    crypto->hash(shared_key, 32);
+    hash(shared_key, 32);
 
     initNonce(fromNode, packetNum, extraNonce);
     printBytes("Attempt decrypt with nonce: ", nonce, 13);

src/mesh/Default.h

@@ -29,6 +29,7 @@
 #else
 #define default_ringtone_nag_secs 15
 #endif
+#define default_network_ipv6_enabled false
 
 #define default_mqtt_address "mqtt.meshtastic.org"
 #define default_mqtt_username "meshdev"

src/mesh/FloodingRouter.cpp

@@ -31,33 +31,8 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
         wasSeenRecently(p, true, nullptr, nullptr, &wasUpgraded); // Updates history; returns false when an upgrade is detected
 
     // Handle hop_limit upgrade scenario for rebroadcasters
-    // isRebroadcaster() is duplicated in perhapsRebroadcast(), but this avoids confusing log messages
-    if (wasUpgraded && isRebroadcaster() && iface && p->hop_limit > 0) {
-        // wasSeenRecently() reports false in upgrade cases so we handle replacement before the duplicate short-circuit
-        // If we overhear a duplicate copy of the packet with more hops left than the one we are waiting to
-        // rebroadcast, then remove the packet currently sitting in the TX queue and use this one instead.
-        uint8_t dropThreshold = p->hop_limit; // remove queued packets that have fewer hops remaining
-        if (iface->removePendingTXPacket(getFrom(p), p->id, dropThreshold)) {
-            LOG_DEBUG("Processing upgraded packet 0x%08x for rebroadcast with hop limit %d (dropping queued < %d)", p->id,
-                      p->hop_limit, dropThreshold);
-
-            if (nodeDB)
-                nodeDB->updateFrom(*p);
-#if !MESHTASTIC_EXCLUDE_TRACEROUTE
-            if (traceRouteModule && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
-                p->decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP)
-                traceRouteModule->processUpgradedPacket(*p);
-#endif
-
-            perhapsRebroadcast(p);
-
-            // We already enqueued the improved copy, so make sure the incoming packet stops here.
-            return true;
-        }
-
-        // No queue entry was replaced by this upgraded copy, so treat it as a duplicate to avoid
-        // delivering the same packet to applications/phone twice with different hop limits.
-        seenRecently = true;
+    if (wasUpgraded && perhapsHandleUpgradedPacket(p)) {
+        return true; // we handled it, so stop processing
     }
 
     if (seenRecently) {
@@ -70,8 +45,10 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
         if (isRepeated) {
             LOG_DEBUG("Repeated reliable tx");
             // Check if it's still in the Tx queue, if not, we have to relay it again
-            if (!findInTxQueue(p->from, p->id))
+            if (!findInTxQueue(p->from, p->id)) {
+                reprocessPacket(p);
                 perhapsRebroadcast(p);
+            }
         } else {
             perhapsCancelDupe(p);
         }
@@ -82,6 +59,40 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
     return Router::shouldFilterReceived(p);
 }
 
+bool FloodingRouter::perhapsHandleUpgradedPacket(const meshtastic_MeshPacket *p)
+{
+    // isRebroadcaster() is duplicated in perhapsRebroadcast(), but this avoids confusing log messages
+    if (isRebroadcaster() && iface && p->hop_limit > 0) {
+        // If we overhear a duplicate copy of the packet with more hops left than the one we are waiting to
+        // rebroadcast, then remove the packet currently sitting in the TX queue and use this one instead.
+        uint8_t dropThreshold = p->hop_limit; // remove queued packets that have fewer hops remaining
+        if (iface->removePendingTXPacket(getFrom(p), p->id, dropThreshold)) {
+            LOG_DEBUG("Processing upgraded packet 0x%08x for rebroadcast with hop limit %d (dropping queued < %d)", p->id,
+                      p->hop_limit, dropThreshold);
+
+            reprocessPacket(p);
+            perhapsRebroadcast(p);
+
+            rxDupe++;
+            // We already enqueued the improved copy, so make sure the incoming packet stops here.
+            return true;
+        }
+    }
+
+    return false;
+}
+
+void FloodingRouter::reprocessPacket(const meshtastic_MeshPacket *p)
+{
+    if (nodeDB)
+        nodeDB->updateFrom(*p);
+#if !MESHTASTIC_EXCLUDE_TRACEROUTE
+    if (traceRouteModule && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
+        p->decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP)
+        traceRouteModule->processUpgradedPacket(*p);
+#endif
+}
+
 bool FloodingRouter::roleAllowsCancelingDupe(const meshtastic_MeshPacket *p)
 {
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
@@ -121,41 +132,6 @@ bool FloodingRouter::isRebroadcaster()
            config.device.rebroadcast_mode != meshtastic_Config_DeviceConfig_RebroadcastMode_NONE;
 }
 
-void FloodingRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p)
-{
-    if (!isToUs(p) && (p->hop_limit > 0) && !isFromUs(p)) {
-        if (p->id != 0) {
-            if (isRebroadcaster()) {
-                meshtastic_MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
-
-                // Use shared logic to determine if hop_limit should be decremented
-                if (shouldDecrementHopLimit(p)) {
-                    tosend->hop_limit--; // bump down the hop count
-                } else {
-                    LOG_INFO("favorite-ROUTER/CLIENT_BASE-to-ROUTER/CLIENT_BASE flood: preserving hop_limit");
-                }
-#if USERPREFS_EVENT_MODE
-                if (tosend->hop_limit > 2) {
-                    // if we are "correcting" the hop_limit, "correct" the hop_start by the same amount to preserve hops away.
-                    tosend->hop_start -= (tosend->hop_limit - 2);
-                    tosend->hop_limit = 2;
-                }
-#endif
-
-                tosend->next_hop = NO_NEXT_HOP_PREFERENCE; // this should already be the case, but just in case
-
-                LOG_INFO("Rebroadcast received floodmsg");
-                // Note: we are careful to resend using the original senders node id
-                send(tosend);
-            } else {
-                LOG_DEBUG("No rebroadcast: Role = CLIENT_MUTE or Rebroadcast Mode = NONE");
-            }
-        } else {
-            LOG_DEBUG("Ignore 0 id broadcast");
-        }
-    }
-}
-
 void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtastic_Routing *c)
 {
     bool isAckorReply = (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) &&

src/mesh/FloodingRouter.h

@@ -27,10 +27,6 @@
  */
 class FloodingRouter : public Router
 {
-  private:
-    /* Check if we should rebroadcast this packet, and do so if needed */
-    void perhapsRebroadcast(const meshtastic_MeshPacket *p);
-
   public:
     /**
      * Constructor
@@ -59,6 +55,17 @@ class FloodingRouter : public Router
      */
     virtual void sniffReceived(const meshtastic_MeshPacket *p, const meshtastic_Routing *c) override;
 
+    /* Check if we should rebroadcast this packet, and do so if needed */
+    virtual bool perhapsRebroadcast(const meshtastic_MeshPacket *p) = 0;
+
+    /* Check if we should handle an upgraded packet (with higher hop_limit)
+     * @return true if we handled it (so stop processing)
+     */
+    bool perhapsHandleUpgradedPacket(const meshtastic_MeshPacket *p);
+
+    /* Call when we receive a packet that needs some reprocessing, but afterwards should be filtered */
+    void reprocessPacket(const meshtastic_MeshPacket *p);
+
     // Return false for roles like ROUTER which should always rebroadcast even when we've heard another rebroadcast of
     // the same packet
     bool roleAllowsCancelingDupe(const meshtastic_MeshPacket *p);

src/mesh/InterfacesTemplates.cpp

@@ -25,7 +25,7 @@ template class LR11x0Interface<LR1121>;
 template class SX126xInterface<STM32WLx>;
 #endif
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 #include "api/ethServerAPI.h"
 template class ServerAPI<EthernetClient>;
 template class APIServerPort<ethServerAPI, EthernetServer>;

src/mesh/LR11x0Interface.cpp

@@ -244,6 +244,8 @@ template <typename T> void LR11x0Interface<T>::startReceive()
     // We use a 16 bit preamble so this should save some power by letting radio sit in standby mostly.
     int err =
         lora.startReceive(RADIOLIB_LR11X0_RX_TIMEOUT_INF, MESHTASTIC_RADIOLIB_IRQ_RX_FLAGS, RADIOLIB_IRQ_RX_DEFAULT_MASK, 0);
+    if (err)
+        LOG_ERROR("StartReceive error: %d", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     RadioLibInterface::startReceive();
@@ -304,4 +306,4 @@ template <typename T> bool LR11x0Interface<T>::sleep()
 
     return true;
 }
-#endif
+#endif

src/mesh/MeshService.h

@@ -79,6 +79,18 @@ class MeshService
     uint32_t oldFromNum = 0;
 
   public:
+    enum APIState {
+        STATE_DISCONNECTED, // Initial state, no API is connected
+        STATE_BLE,
+        STATE_WIFI,
+        STATE_SERIAL,
+        STATE_PACKET,
+        STATE_HTTP,
+        STATE_ETH
+    };
+
+    APIState api_state = STATE_DISCONNECTED;
+
     static bool isTextPayload(const meshtastic_MeshPacket *p)
     {
         if (moduleConfig.range_test.enabled && p->decoded.portnum == meshtastic_PortNum_RANGE_TEST_APP) {

src/mesh/NextHopRouter.cpp

@@ -43,31 +43,8 @@ bool NextHopRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
                                         &wasUpgraded); // Updates history; returns false when an upgrade is detected
 
     // Handle hop_limit upgrade scenario for rebroadcasters
-    // isRebroadcaster() is duplicated in perhapsRelay(), but this avoids confusing log messages
-    if (wasUpgraded && isRebroadcaster() && iface && p->hop_limit > 0) {
-        // Upgrade detection bypasses the duplicate short-circuit so we replace the queued packet before exiting
-        uint8_t dropThreshold = p->hop_limit; // remove queued packets that have fewer hops remaining
-        if (iface->removePendingTXPacket(getFrom(p), p->id, dropThreshold)) {
-            LOG_DEBUG("Processing upgraded packet 0x%08x for relay with hop limit %d (dropping queued < %d)", p->id, p->hop_limit,
-                      dropThreshold);
-
-            if (nodeDB)
-                nodeDB->updateFrom(*p);
-#if !MESHTASTIC_EXCLUDE_TRACEROUTE
-            if (traceRouteModule && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
-                p->decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP)
-                traceRouteModule->processUpgradedPacket(*p);
-#endif
-
-            perhapsRelay(p);
-
-            // We already enqueued the improved copy, so make sure the incoming packet stops here.
-            return true;
-        }
-
-        // No queue entry was replaced by this upgraded copy, so treat it as a duplicate to avoid
-        // delivering the same packet to applications/phone twice with different hop limits.
-        seenRecently = true;
+    if (wasUpgraded && perhapsHandleUpgradedPacket(p)) {
+        return true; // we handled it, so stop processing
     }
 
     if (seenRecently) {
@@ -82,14 +59,20 @@ bool NextHopRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
         if (wasFallback) {
             LOG_INFO("Fallback to flooding from relay_node=0x%x", p->relay_node);
             // Check if it's still in the Tx queue, if not, we have to relay it again
-            if (!findInTxQueue(p->from, p->id))
-                perhapsRelay(p);
+            if (!findInTxQueue(p->from, p->id)) {
+                reprocessPacket(p);
+                perhapsRebroadcast(p);
+            }
         } else {
             bool isRepeated = p->hop_start > 0 && p->hop_start == p->hop_limit;
             // If repeated and not in Tx queue anymore, try relaying again, or if we are the destination, send the ACK again
             if (isRepeated) {
-                if (!findInTxQueue(p->from, p->id) && !perhapsRelay(p) && isToUs(p) && p->want_ack)
-                    sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel, 0);
+                if (!findInTxQueue(p->from, p->id)) {
+                    reprocessPacket(p);
+                    if (!perhapsRebroadcast(p) && isToUs(p) && p->want_ack) {
+                        sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel, 0);
+                    }
+                }
             } else if (!weWereNextHop) {
                 perhapsCancelDupe(p); // If it's a dupe, cancel relay if we were not explicitly asked to relay
             }
@@ -107,13 +90,14 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
     bool isAckorReply = (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) &&
                         (p->decoded.request_id != 0 || p->decoded.reply_id != 0);
     if (isAckorReply) {
-        // Update next-hop for the original transmitter of this successful transmission to the relay node, but ONLY if "from" is
-        // not 0 (means implicit ACK) and original packet was also relayed by this node, or we sent it directly to the destination
+        // Update next-hop for the original transmitter of this successful transmission to the relay node, but ONLY if "from"
+        // is not 0 (means implicit ACK) and original packet was also relayed by this node, or we sent it directly to the
+        // destination
         if (p->from != 0) {
             meshtastic_NodeInfoLite *origTx = nodeDB->getMeshNode(p->from);
             if (origTx) {
-                // Either relayer of ACK was also a relayer of the packet, or we were the *only* relayer and the ACK came directly
-                // from the destination
+                // Either relayer of ACK was also a relayer of the packet, or we were the *only* relayer and the ACK came
+                // directly from the destination
                 bool wasAlreadyRelayer = wasRelayer(p->relay_node, p->decoded.request_id, p->to);
                 bool weWereSoleRelayer = false;
                 bool weWereRelayer = wasRelayer(ourRelayID, p->decoded.request_id, p->to, &weWereSoleRelayer);
@@ -134,34 +118,49 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
         }
     }
 
-    perhapsRelay(p);
+    perhapsRebroadcast(p);
 
     // handle the packet as normal
     Router::sniffReceived(p, c);
 }
 
-/* Check if we should be relaying this packet if so, do so. */
-bool NextHopRouter::perhapsRelay(const meshtastic_MeshPacket *p)
+/* Check if we should be rebroadcasting this packet if so, do so. */
+bool NextHopRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p)
 {
     if (!isToUs(p) && !isFromUs(p) && p->hop_limit > 0) {
-        if (p->next_hop == NO_NEXT_HOP_PREFERENCE || p->next_hop == nodeDB->getLastByteOfNodeNum(getNodeNum())) {
+        if (p->id != 0) {
             if (isRebroadcaster()) {
-                meshtastic_MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
-                LOG_INFO("Relaying received message coming from %x", p->relay_node);
+                if (p->next_hop == NO_NEXT_HOP_PREFERENCE || p->next_hop == nodeDB->getLastByteOfNodeNum(getNodeNum())) {
+                    meshtastic_MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
+                    LOG_INFO("Rebroadcast received message coming from %x", p->relay_node);
 
-                // Use shared logic to determine if hop_limit should be decremented
-                if (shouldDecrementHopLimit(p)) {
-                    tosend->hop_limit--; // bump down the hop count
-                } else {
-                    LOG_INFO("Router/CLIENT_BASE-to-favorite-router/CLIENT_BASE relay: preserving hop_limit");
+                    // Use shared logic to determine if hop_limit should be decremented
+                    if (shouldDecrementHopLimit(p)) {
+                        tosend->hop_limit--; // bump down the hop count
+                    } else {
+                        LOG_INFO("favorite-ROUTER/CLIENT_BASE-to-ROUTER/CLIENT_BASE rebroadcast: preserving hop_limit");
+                    }
+#if USERPREFS_EVENT_MODE
+                    if (tosend->hop_limit > 2) {
+                        // if we are "correcting" the hop_limit, "correct" the hop_start by the same amount to preserve hops away.
+                        tosend->hop_start -= (tosend->hop_limit - 2);
+                        tosend->hop_limit = 2;
+                    }
+#endif
+
+                    if (p->next_hop == NO_NEXT_HOP_PREFERENCE) {
+                        FloodingRouter::send(tosend);
+                    } else {
+                        NextHopRouter::send(tosend);
+                    }
+
+                    return true;
                 }
-
-                NextHopRouter::send(tosend);
-
-                return true;
             } else {
-                LOG_DEBUG("Not rebroadcasting: Role = CLIENT_MUTE or Rebroadcast Mode = NONE");
+                LOG_DEBUG("No rebroadcast: Role = CLIENT_MUTE or Rebroadcast Mode = NONE");
             }
+        } else {
+            LOG_DEBUG("Ignore 0 id broadcast");
         }
     }
 
@@ -231,13 +230,13 @@ bool NextHopRouter::stopRetransmission(GlobalPacketId key)
             }
         }
 
-        // Regardless of whether or not we canceled this packet from the txQueue, remove it from our pending list so it doesn't
-        // get scheduled again. (This is the core of stopRetransmission.)
+        // Regardless of whether or not we canceled this packet from the txQueue, remove it from our pending list so it
+        // doesn't get scheduled again. (This is the core of stopRetransmission.)
         auto numErased = pending.erase(key);
         assert(numErased == 1);
 
-        // When we remove an entry from pending, always be sure to release the copy of the packet that was allocated in the call
-        // to startRetransmission.
+        // When we remove an entry from pending, always be sure to release the copy of the packet that was allocated in the
+        // call to startRetransmission.
         packetPool.release(p);
 
         return true;

src/mesh/NextHopRouter.h

@@ -148,7 +148,7 @@ class NextHopRouter : public FloodingRouter
      */
     uint8_t getNextHop(NodeNum to, uint8_t relay_node);
 
-    /** Check if we should be relaying this packet if so, do so.
-     *  @return true if we did relay */
-    bool perhapsRelay(const meshtastic_MeshPacket *p);
+    /** Check if we should be rebroadcasting this packet if so, do so.
+     *  @return true if we did rebroadcast */
+    bool perhapsRebroadcast(const meshtastic_MeshPacket *p) override;
 };

src/mesh/NodeDB.cpp

@@ -653,7 +653,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     strncpy(config.network.ntp_server, "meshtastic.pool.ntp.org", 32);
 
 #if (defined(T_DECK) || defined(T_WATCH_S3) || defined(UNPHONE) || defined(PICOMPUTER_S3) || defined(SENSECAP_INDICATOR) ||      \
-     defined(ELECROW_PANEL)) &&                                                                                                  \
+     defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT)) &&                                                                        \
     HAS_TFT
     // switch BT off by default; use TFT programming mode or hotkey to enable
     config.bluetooth.enabled = false;
@@ -718,6 +718,12 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     strncpy(config.network.wifi_psk, USERPREFS_NETWORK_WIFI_PSK, sizeof(config.network.wifi_psk));
 #endif
 
+#if defined(USERPREFS_NETWORK_IPV6_ENABLED)
+    config.network.ipv6_enabled = USERPREFS_NETWORK_IPV6_ENABLED;
+#else
+    config.network.ipv6_enabled = default_network_ipv6_enabled;
+#endif
+
 #ifdef DISPLAY_FLIP_SCREEN
     config.display.flip_screen = true;
 #endif
@@ -728,6 +734,9 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.display.screen_on_secs = 30;
     config.display.wake_on_tap_or_motion = true;
 #endif
+#ifdef COMPASS_ORIENTATION
+    config.display.compass_orientation = COMPASS_ORIENTATION;
+#endif
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
     if (WiFiOTA::isUpdated()) {
         WiFiOTA::recoverConfig(&config.network);
@@ -978,12 +987,25 @@ void NodeDB::installDefaultChannels()
     channelFile.version = DEVICESTATE_CUR_VER;
 }
 
-void NodeDB::resetNodes()
+void NodeDB::resetNodes(bool keepFavorites)
 {
     if (!config.position.fixed_position)
         clearLocalPosition();
     numMeshNodes = 1;
-    std::fill(nodeDatabase.nodes.begin() + 1, nodeDatabase.nodes.end(), meshtastic_NodeInfoLite());
+    if (keepFavorites) {
+        LOG_INFO("Clearing node database - preserving favorites");
+        for (size_t i = 0; i < meshNodes->size(); i++) {
+            meshtastic_NodeInfoLite &node = meshNodes->at(i);
+            if (i > 0 && !node.is_favorite) {
+                node = meshtastic_NodeInfoLite();
+            } else {
+                numMeshNodes += 1;
+            }
+        };
+    } else {
+        LOG_INFO("Clearing node database - removing favorites");
+        std::fill(nodeDatabase.nodes.begin() + 1, nodeDatabase.nodes.end(), meshtastic_NodeInfoLite());
+    }
     devicestate.has_rx_text_message = false;
     devicestate.has_rx_waypoint = false;
     saveNodeDatabaseToDisk();
@@ -1632,13 +1654,32 @@ void NodeDB::addFromContact(meshtastic_SharedContact contact)
         // If should_ignore is set,
         // we need to clear the public key and other cruft, in addition to setting the node as ignored
         info->is_ignored = true;
+        info->is_favorite = false;
         info->has_device_metrics = false;
         info->has_position = false;
         info->user.public_key.size = 0;
         info->user.public_key.bytes[0] = 0;
     } else {
-        info->last_heard = getValidTime(RTCQualityNTP);
-        info->is_favorite = true;
+        /* Clients are sending add_contact before every text message DM (because clients may hold a larger node database with
+         * public keys than the radio holds). However, we don't want to update last_heard just because we sent someone a DM!
+         */
+
+        /* "Boring old nodes" are the first to be evicted out of the node database when full. This includes a newly-zeroed
+         * nodeinfo because it has: !is_favorite && last_heard==0. To keep this from happening when we addFromContact, we set the
+         * new node as a favorite, and we leave last_heard alone (even if it's zero).
+         */
+        if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE) {
+            // Special case for CLIENT_BASE: is_favorite has special meaning, and we don't want to automatically set it
+            // without the user doing so deliberately. We don't normally expect users to use a CLIENT_BASE to send DMs or to add
+            // contacts, but we should make sure it doesn't auto-favorite in case they do. Instead, as a workaround, we'll set
+            // last_heard to now, so that the add_contact node doesn't immediately get evicted.
+            info->last_heard = getTime();
+        } else {
+            // Normal case: set is_favorite to prevent expiration.
+            // last_heard will remain as-is (or remain 0 if this entry wasn't in the nodeDB).
+            info->is_favorite = true;
+        }
+
         // As the clients will begin sending the contact with DMs, we want to strictly check if the node is manually verified
         if (contact.manually_verified) {
             info->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
@@ -1970,6 +2011,7 @@ UserLicenseStatus NodeDB::getLicenseStatus(uint32_t nodeNum)
     return info->user.is_licensed ? UserLicenseStatus::Licensed : UserLicenseStatus::NotLicensed;
 }
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
 bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest)
 {
     if (keyToTest.size == 32) {
@@ -1984,6 +2026,7 @@ bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_pub
     }
     return false;
 }
+#endif
 
 bool NodeDB::backupPreferences(meshtastic_AdminMessage_BackupLocation location)
 {

src/mesh/NodeDB.h

@@ -229,7 +229,8 @@ class NodeDB
      */
     size_t getNumOnlineMeshNodes(bool localOnly = false);
 
-    void initConfigIntervals(), initModuleConfigIntervals(), resetNodes(), removeNodeByNum(NodeNum nodeNum);
+    void initConfigIntervals(), initModuleConfigIntervals(), resetNodes(bool keepFavorites = false),
+        removeNodeByNum(NodeNum nodeNum);
 
     bool factoryReset(bool eraseBleBonds = false);
 
@@ -282,7 +283,9 @@ class NodeDB
 
     bool hasValidPosition(const meshtastic_NodeInfoLite *n);
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
     bool checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest);
+#endif
 
     bool backupPreferences(meshtastic_AdminMessage_BackupLocation location);
     bool restorePreferences(meshtastic_AdminMessage_BackupLocation location,
@@ -372,4 +375,4 @@ extern uint32_t error_address;
      ModuleConfig_RangeTestConfig_size + ModuleConfig_SerialConfig_size + ModuleConfig_StoreForwardConfig_size +                 \
      ModuleConfig_TelemetryConfig_size + ModuleConfig_size)
 
-// Please do not remove this comment, it makes trunk and compiler happy at the same time.
+// Please do not remove this comment, it makes trunk and compiler happy at the same time.

src/mesh/PacketHistory.cpp

@@ -94,7 +94,6 @@ bool PacketHistory::wasSeenRecently(const meshtastic_MeshPacket *p, bool withUpd
         LOG_DEBUG("Packet History - Hop limit upgrade: packet 0x%08x from hop_limit=%d to hop_limit=%d", p->id, found->hop_limit,
                   p->hop_limit);
         *wasUpgraded = true;
-        seenRecently = false; // Allow router processing but prevent duplicate app delivery
     } else if (wasUpgraded) {
         *wasUpgraded = false; // Initialize to false if not an upgrade
     }

src/mesh/PhoneAPI.cpp

@@ -87,6 +87,18 @@ void PhoneAPI::handleStartConfig()
 void PhoneAPI::close()
 {
     LOG_DEBUG("PhoneAPI::close()");
+    if (service->api_state == service->STATE_BLE && api_type == TYPE_BLE)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_WIFI && api_type == TYPE_WIFI)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_SERIAL && api_type == TYPE_SERIAL)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_PACKET && api_type == TYPE_PACKET)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_HTTP && api_type == TYPE_HTTP)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_ETH && api_type == TYPE_ETH)
+        service->api_state = service->STATE_DISCONNECTED;
 
     if (state != STATE_SEND_NOTHING) {
         state = STATE_SEND_NOTHING;
@@ -578,6 +590,19 @@ void PhoneAPI::sendConfigComplete()
     fromRadioScratch.config_complete_id = config_nonce;
     config_nonce = 0;
     state = STATE_SEND_PACKETS;
+    if (api_type == TYPE_BLE) {
+        service->api_state = service->STATE_BLE;
+    } else if (api_type == TYPE_WIFI) {
+        service->api_state = service->STATE_WIFI;
+    } else if (api_type == TYPE_SERIAL) {
+        service->api_state = service->STATE_SERIAL;
+    } else if (api_type == TYPE_PACKET) {
+        service->api_state = service->STATE_PACKET;
+    } else if (api_type == TYPE_HTTP) {
+        service->api_state = service->STATE_HTTP;
+    } else if (api_type == TYPE_ETH) {
+        service->api_state = service->STATE_ETH;
+    }
 
     // Allow subclasses to know we've entered steady-state so they can lower power consumption
     onConfigComplete();

src/mesh/PhoneAPI.h

@@ -167,6 +167,18 @@ class PhoneAPI
     /// begin a new connection
     void handleStartConfig();
 
+    enum APIType {
+        TYPE_NONE, // Initial state, don't send anything until the client starts asking for config
+        TYPE_BLE,
+        TYPE_WIFI,
+        TYPE_SERIAL,
+        TYPE_PACKET,
+        TYPE_HTTP,
+        TYPE_ETH
+    };
+
+    APIType api_type = TYPE_NONE;
+
   private:
     void releasePhonePacket();
 

src/mesh/RF95Interface.cpp

@@ -260,6 +260,7 @@ void RF95Interface::addReceiveMetadata(meshtastic_MeshPacket *mp)
 {
     mp->rx_snr = lora->getSNR();
     mp->rx_rssi = lround(lora->getRSSI());
+    LOG_DEBUG("Corrected frequency offset: %f", lora->getFrequencyError());
 }
 
 void RF95Interface::setStandby()

src/mesh/Router.cpp

@@ -479,6 +479,11 @@ DecodeState perhapsDecode(meshtastic_MeshPacket *p)
                     LOG_ERROR("Invalid protobufs in received mesh packet id=0x%08x (bad psk?)!", p->id);
                 } else if (decodedtmp.portnum == meshtastic_PortNum_UNKNOWN_APP) {
                     LOG_ERROR("Invalid portnum (bad psk?)!");
+#if !(MESHTASTIC_EXCLUDE_PKI)
+                } else if (!owner.is_licensed && isToUs(p) && decodedtmp.portnum == meshtastic_PortNum_TEXT_MESSAGE_APP) {
+                    LOG_WARN("Rejecting legacy DM");
+                    return DecodeState::DECODE_FAILURE;
+#endif
                 } else {
                     p->decoded = decodedtmp;
                     p->which_payload_variant = meshtastic_MeshPacket_decoded_tag; // change type to decoded

src/mesh/api/PacketAPI.cpp

@@ -19,6 +19,7 @@ PacketAPI *PacketAPI::create(PacketServer *_server)
 PacketAPI::PacketAPI(PacketServer *_server)
     : concurrency::OSThread("PacketAPI"), isConnected(false), programmingMode(false), server(_server)
 {
+    api_type = TYPE_PACKET;
 }
 
 int32_t PacketAPI::runOnce()

src/mesh/api/WiFiServerAPI.cpp

@@ -25,6 +25,7 @@ void deInitApiServer()
 
 WiFiServerAPI::WiFiServerAPI(WiFiClient &_client) : ServerAPI(_client)
 {
+    api_type = TYPE_WIFI;
     LOG_INFO("Incoming wifi connection");
 }
 

src/mesh/api/ethServerAPI.cpp

@@ -1,7 +1,7 @@
 #include "configuration.h"
 #include <Arduino.h>
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 
 #include "ethServerAPI.h"
 
@@ -20,6 +20,7 @@ void initApiServer(int port)
 ethServerAPI::ethServerAPI(EthernetClient &_client) : ServerAPI(_client)
 {
     LOG_INFO("Incoming ethernet connection");
+    api_type = TYPE_ETH;
 }
 
 ethServerPort::ethServerPort(int port) : APIServerPort(port) {}

src/mesh/api/ethServerAPI.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #include "ServerAPI.h"
-#ifndef USE_WS5500
+#if !defined(USE_WS5500) && !defined(USE_CH390D)
 #include <RAK13800_W5100S.h>
 
 /**

src/mesh/generated/meshtastic/admin.pb.h

@@ -272,8 +272,9 @@ typedef struct _meshtastic_AdminMessage {
         int32_t shutdown_seconds;
         /* Tell the node to factory reset config; all device state and configuration will be returned to factory defaults; BLE bonds will be preserved. */
         int32_t factory_reset_config;
-        /* Tell the node to reset the nodedb. */
-        int32_t nodedb_reset;
+        /* Tell the node to reset the nodedb.
+     When true, favorites are preserved through reset. */
+        bool nodedb_reset;
     };
     /* The node generates this key and sends it with any get_x_response packets.
  The client MUST include the same key with any set_x commands. Key expires after 300 seconds.
@@ -459,7 +460,7 @@ X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,exit_simulator,exit_simulato
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,reboot_seconds,reboot_seconds),  97) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,shutdown_seconds,shutdown_seconds),  98) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,factory_reset_config,factory_reset_config),  99) \
-X(a, STATIC,   ONEOF,    INT32,    (payload_variant,nodedb_reset,nodedb_reset), 100) \
+X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,nodedb_reset,nodedb_reset), 100) \
 X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101)
 #define meshtastic_AdminMessage_CALLBACK NULL
 #define meshtastic_AdminMessage_DEFAULT NULL

src/mesh/generated/meshtastic/mesh.pb.h

@@ -284,6 +284,16 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_T_WATCH_ULTRA = 114,
     /* Elecrow ThinkNode M3 */
     meshtastic_HardwareModel_THINKNODE_M3 = 115,
+    /* RAK WISMESH_TAP_V2 with ESP32-S3 CPU */
+    meshtastic_HardwareModel_WISMESH_TAP_V2 = 116,
+    /* RAK3401 */
+    meshtastic_HardwareModel_RAK3401 = 117,
+    /* RAK6421 Hat+ */
+    meshtastic_HardwareModel_RAK6421 = 118,
+    /* Elecrow ThinkNode M4 */
+    meshtastic_HardwareModel_THINKNODE_M4 = 119,
+    /* Elecrow ThinkNode M6 */
+    meshtastic_HardwareModel_THINKNODE_M6 = 120,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -821,7 +831,11 @@ typedef struct _meshtastic_MeshPacket {
  Note: Our crypto implementation uses this field as well.
  See [crypto](/docs/overview/encryption) for details. */
     uint32_t from;
-    /* The (immediate) destination for this packet */
+    /* The (immediate) destination for this packet
+ If the value is 4,294,967,295 (maximum value of an unsigned 32bit integer), this indicates that the packet was
+ not destined for a specific node, but for a channel as indicated by the value of `channel` below.
+ If the value is another, this indicates that the packet was destined for a specific
+ node (i.e. a kind of "Direct Message" to this node) and not broadcast on a channel. */
     uint32_t to;
     /* (Usually) If set, this indicates the index in the secondary_channels table that this packet was sent/received on.
  If unset, packet was on the primary channel.

src/mesh/http/ContentHandler.cpp

@@ -148,6 +148,8 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer)
 
 void handleAPIv1FromRadio(HTTPRequest *req, HTTPResponse *res)
 {
+    if (webServerThread)
+        webServerThread->markActivity();
 
     LOG_DEBUG("webAPI handleAPIv1FromRadio");
 
@@ -391,6 +393,9 @@ void handleFsDeleteStatic(HTTPRequest *req, HTTPResponse *res)
 
 void handleStatic(HTTPRequest *req, HTTPResponse *res)
 {
+    if (webServerThread)
+        webServerThread->markActivity();
+
     // Get access to the parameters
     ResourceParameters *params = req->getParams();
 

src/mesh/http/ContentHandler.h

@@ -26,7 +26,7 @@ class HttpAPI : public PhoneAPI
 {
 
   public:
-    // Nothing here yet
+    HttpAPI() { api_type = TYPE_HTTP; }
 
   private:
     // Nothing here yet

src/mesh/http/WebServer.cpp

@@ -49,6 +49,12 @@ Preferences prefs;
 using namespace httpsserver;
 #include "mesh/http/ContentHandler.h"
 
+static const uint32_t ACTIVE_THRESHOLD_MS = 5000;
+static const uint32_t MEDIUM_THRESHOLD_MS = 30000;
+static const int32_t ACTIVE_INTERVAL_MS = 50;
+static const int32_t MEDIUM_INTERVAL_MS = 200;
+static const int32_t IDLE_INTERVAL_MS = 1000;
+
 static SSLCert *cert;
 static HTTPSServer *secureServer;
 static HTTPServer *insecureServer;
@@ -175,6 +181,32 @@ WebServerThread::WebServerThread() : concurrency::OSThread("WebServer")
     if (!config.network.wifi_enabled && !config.network.eth_enabled) {
         disable();
     }
+    lastActivityTime = millis();
+}
+
+void WebServerThread::markActivity()
+{
+    lastActivityTime = millis();
+}
+
+int32_t WebServerThread::getAdaptiveInterval()
+{
+    uint32_t currentTime = millis();
+    uint32_t timeSinceActivity;
+
+    if (currentTime >= lastActivityTime) {
+        timeSinceActivity = currentTime - lastActivityTime;
+    } else {
+        timeSinceActivity = (UINT32_MAX - lastActivityTime) + currentTime + 1;
+    }
+
+    if (timeSinceActivity < ACTIVE_THRESHOLD_MS) {
+        return ACTIVE_INTERVAL_MS;
+    } else if (timeSinceActivity < MEDIUM_THRESHOLD_MS) {
+        return MEDIUM_INTERVAL_MS;
+    } else {
+        return IDLE_INTERVAL_MS;
+    }
 }
 
 int32_t WebServerThread::runOnce()
@@ -189,8 +221,7 @@ int32_t WebServerThread::runOnce()
         ESP.restart();
     }
 
-    // Loop every 5ms.
-    return (5);
+    return getAdaptiveInterval();
 }
 
 void initWebServer()