Merge branch 'master' into nomad-gemini

.clusterfuzzlite/router_fuzzer.cpp

@@ -76,7 +76,7 @@ bool loopCanSleep()
 // Called just prior to starting Meshtastic. Allows for setting config values before startup.
 void lateInitVariant()
 {
-    portduino_config.logoutputlevel = level_error;
+    settingsMap[logoutputlevel] = level_error;
     channelFile.channels[0] = meshtastic_Channel{
         .has_settings = true,
         .settings =
@@ -132,7 +132,7 @@ int portduino_main(int argc, char **argv); // Renamed "main" function from Mesht
 // Start Meshtastic in a thread and wait till it has reached the ON state.
 int LLVMFuzzerInitialize(int *argc, char ***argv)
 {
-    portduino_config.maxtophone = 5;
+    settingsMap[maxtophone] = 5;
 
     meshtasticThread = std::thread([program = *argv[0]]() {
         char nodeIdStr[12];

.devcontainer/Dockerfile

@@ -1,7 +1,7 @@
 # trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
-FROM mcr.microsoft.com/devcontainers/cpp:2-debian-13
+FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
 
 USER root
 

.devcontainer/devcontainer.json

@@ -8,7 +8,7 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "3.14"
+      "version": "latest"
     }
   },
   "customizations": {

.github/actions/build-variant/action.yml

@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v5
+      uses: actions/upload-artifact@v4
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true

.github/actions/setup-base/action.yml

@@ -5,12 +5,17 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v5
+      uses: actions/checkout@v4
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
+    - name: Uncomment build epoch
+      shell: bash
+      run: |
+        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
     - name: Install dependencies
       shell: bash
       run: |
@@ -18,7 +23,7 @@ runs:
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
 
     - name: Setup Python
-      uses: actions/setup-python@v6
+      uses: actions/setup-python@v5
       with:
         python-version: 3.x
         cache: pip

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_esp32.yml

@@ -0,0 +1,40 @@
+name: Build ESP32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware.bin
+          ota_firmware_target: release/bleota.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_c3.yml

@@ -0,0 +1,40 @@
+name: Build ESP32-C3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c3:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32-C3
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_c6.yml

@@ -0,0 +1,40 @@
+name: Build ESP32-C6
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c6:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32-C6
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c6-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -0,0 +1,40 @@
+name: Build ESP32-S3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-s3:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32-S3
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-s3.bin
+          ota_firmware_target: release/bleota-s3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32s3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_firmware.yml

@@ -1,69 +0,0 @@
-name: Build
-
-on:
-  workflow_call:
-    inputs:
-      version:
-        required: true
-        type: string
-      platform:
-        required: true
-        type: string
-      pio_env:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  pio-build:
-    name: build-${{ inputs.platform }}
-    runs-on: ubuntu-24.04
-    outputs:
-      artifact-id: ${{ steps.upload.outputs.artifact-id }}
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Set OTA firmware source and target
-        if: startsWith(inputs.platform, 'esp32')
-        id: ota_dir
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-        run: |
-          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
-            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
-            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32" ]; then
-            echo "src=firmware.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
-          fi
-
-      - name: Build ${{ inputs.platform }}
-        id: build
-        uses: meshtastic/gh-action-firmware@main
-        with:
-          pio_platform: ${{ inputs.platform }}
-          pio_env: ${{ inputs.pio_env }}
-          pio_target: build
-          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
-          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
-        id: upload
-        with:
-          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
-          overwrite: true
-          path: |
-            release/*.bin
-            release/*.elf
-            release/*.uf2
-            release/*.hex
-            release/*-ota.zip

.github/workflows/build_nrf52.yml

@@ -0,0 +1,40 @@
+name: Build NRF52
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-nrf52:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build NRF52
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: nrf52
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-nrf52840-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.uf2
+            release/*.elf
+            release/*.hex
+            release/*-ota.zip

.github/workflows/build_one_arch.yml

@@ -1,176 +0,0 @@
-name: Build One Arch
-
-on:
-  workflow_dispatch:
-    inputs:
-      # trunk-ignore(checkov/CKV_GHA_7)
-      arch:
-        type: choice
-        options:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - native
-
-permissions: read-all
-
-env:
-  INPUT_ARCH: ${{ github.event.inputs.arch }}
-
-jobs:
-  setup:
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
-          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
-    outputs:
-      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  build:
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix:
-        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.build.board }}
-      platform: ${{ matrix.build.arch }}
-
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
-    uses: ./.github/workflows/test_native.yml
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs: [version, build]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v6
-        with:
-          path: ./
-          pattern: firmware-${{inputs.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v6
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_one_target.yml

@@ -1,182 +0,0 @@
-name: Build One Target
-
-on:
-  workflow_dispatch:
-    inputs:
-      # trunk-ignore(checkov/CKV_GHA_7)
-      arch:
-        type: choice
-        options:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - native
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
-      # find-target:
-      #   type: boolean
-      #   default: true
-      #   description: 'Find the available targets'
-
-permissions: read-all
-
-jobs:
-  find-targets:
-    if: ${{ inputs.target == '' }}
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
-          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
-          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS >> $GITHUB_STEP_SUMMARY
-
-  version:
-    if: ${{ inputs.target != '' }}
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  build:
-    if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version]
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ inputs.target }}
-      platform: ${{ inputs.arch }}
-
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
-    uses: ./.github/workflows/test_native.yml
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
-    runs-on: ubuntu-latest
-    needs: [version, build]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v6
-        with:
-          path: ./
-          pattern: firmware-*-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
-        with:
-          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v6
-        with:
-          pattern: firmware-*-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
-        with:
-          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_rpi2040.yml

@@ -0,0 +1,38 @@
+name: Build RPI2040
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-rpi2040:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build Raspberry Pi 2040
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: rp2xx0
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-rp2040-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.uf2
+            release/*.elf

.github/workflows/build_stm32.yml

@@ -0,0 +1,39 @@
+name: Build STM32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-stm32:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build STM32WL
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: stm32wl
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-stm32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.hex
+            release/*.bin
+            release/*.elf

.github/workflows/daily_packaging.yml

@@ -21,22 +21,16 @@ permissions:
 
 jobs:
   docker-multiarch:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_manifest.yml
     with:
       release_channel: daily
     secrets: inherit
 
   package-ppa:
-    if: github.repository == 'meshtastic/firmware'
     strategy:
       fail-fast: false
       matrix:
-        series:
-          - jammy # 22.04 LTS
-          - noble # 24.04 LTS
-          - plucky # 25.04
-          - questing # 25.10
+        series: [plucky, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily
@@ -44,7 +38,6 @@ jobs:
     secrets: inherit
 
   package-obs:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/package_obs.yml
     with:
       obs_project: network:Meshtastic:daily
@@ -52,7 +45,6 @@ jobs:
     secrets: inherit
 
   hook-copr:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/hook_copr.yml
     with:
       copr_project: daily

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -3,7 +3,7 @@ concurrency:
   group: ci-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
 on:
-  # # Triggers the workflow on push but only for the main branches
+  # # Triggers the workflow on push but only for the master branch
   push:
     branches:
       - master
@@ -28,77 +28,111 @@ on:
 jobs:
   setup:
     strategy:
-      fail-fast: true
+      fail-fast: false
       matrix:
-        arch:
-          - all
-          - check
-    runs-on: ubuntu-24.04
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
+    runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
+      - id: checkout
+        uses: actions/checkout@v4
+        name: Checkout base
+      - id: jsonStep
         run: |
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
-          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
-          echo "$TARGETS" >> $GITHUB_STEP_SUMMARY
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
+          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
-      all: ${{ steps.jsonStep.outputs.all }}
+      esp32: ${{ steps.jsonStep.outputs.esp32 }}
+      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
+      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
+      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
+      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
+      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
   check:
     needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        check: ${{ fromJson(needs.setup.outputs.check) }}
+      matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.check.board }}
-        run: bin/check-all.sh ${{ matrix.check.board }}
+      - name: Check ${{ matrix.board }}
+        run: bin/check-all.sh ${{ matrix.board }}
 
-  build:
-    needs: [setup, version]
+  build-esp32:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        build: ${{ fromJson(needs.setup.outputs.all) }}
-    uses: ./.github/workflows/build_firmware.yml
+      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
+    uses: ./.github/workflows/build_esp32.yml
     with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.build.board }}
-      platform: ${{ matrix.build.platform }}
+      board: ${{ matrix.board }}
+
+  build-esp32-s3:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
+    uses: ./.github/workflows/build_esp32_s3.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-esp32-c3:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
+    uses: ./.github/workflows/build_esp32_c3.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-esp32-c6:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
+    uses: ./.github/workflows/build_esp32_c6.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-nrf52:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
+    uses: ./.github/workflows/build_nrf52.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-rpi2040:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
+    uses: ./.github/workflows/build_rpi2040.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-stm32:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
+    uses: ./.github/workflows/build_stm32.yml
+    with:
+      board: ${{ matrix.board }}
 
   build-debian-src:
     if: github.repository == 'meshtastic/firmware'
@@ -109,66 +143,93 @@ jobs:
     secrets: inherit
 
   package-pio-deps-native-tft:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name == 'workflow_dispatch' }}
+    if: ${{ github.event_name == 'workflow_dispatch' }}
     uses: ./.github/workflows/package_pio_deps.yml
     with:
       pio_env: native-tft
     secrets: inherit
 
   test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
+    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker:
-    strategy:
-      fail-fast: false
-      matrix:
-        distro: [debian, alpine]
-        platform: [linux/amd64, linux/arm64, linux/arm/v7]
-        pio_env: [native, native-tft]
-        exclude:
-          - distro: alpine
-            platform: linux/arm/v7
-          - pio_env: native-tft
-            platform: linux/arm64
-          - pio_env: native-tft
-            platform: linux/arm/v7
+  docker-deb-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
-      distro: ${{ matrix.distro }}
-      platform: ${{ matrix.platform }}
-      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
-      pio_env: ${{ matrix.pio_env }}
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-deb-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-alp-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm64
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  docker-deb-armv7:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm/v7
+      runs-on: ubuntu-24.04-arm
       push: false
 
   gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    if: github.repository == 'meshtastic/firmware'
     permissions:
       contents: write
       pull-requests: write
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
-    needs: [version, build]
+    needs:
+      [
+        build-esp32,
+        build-esp32-s3,
+        build-esp32-c3,
+        build-esp32-c6,
+        build-nrf52,
+        build-rpi2040,
+        build-stm32,
+      ]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v4
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -177,13 +238,17 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Move files up
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -197,9 +262,9 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -213,12 +278,12 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -226,59 +291,66 @@ jobs:
       - uses: scruplelesswizard/comment-artifact@main
         if: ${{ github.event_name == 'pull_request' }}
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
   release-artifacts:
     runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
+    if: ${{ github.event_name == 'workflow_dispatch' }}
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
-      - version
       - gather-artifacts
       - build-debian-src
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+
       - name: Create release
         uses: softprops/action-gh-release@v2
         id: create_release
         with:
           draft: true
           prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
+          name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
+          tag_name: v${{ steps.version.outputs.long }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v4
         with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v4
         with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output/pio-deps-native-tft
 
       - name: Zip Linux sources
         working-directory: output
         run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+          zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -288,8 +360,8 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
@@ -297,30 +369,26 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware'}}
-    needs: [release-artifacts, version]
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v6
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -333,16 +401,16 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
       - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -352,30 +420,33 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   publish-firmware:
     runs-on: ubuntu-24.04
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
+    needs: [release-firmware]
     env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v6
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
@@ -389,9 +460,9 @@ jobs:
           external_repository: meshtastic/meshtastic.github.io
           publish_branch: master
           publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
           keep_files: true
           user_name: github-actions[bot]
           user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
+          commit_message: ${{ steps.version.outputs.long }}
           enable_jekyll: true

.github/workflows/merge_queue.yml

@@ -1,376 +0,0 @@
-name: Merge Queue
-# Not sure how concurrency works in merge_queue, removing for now.
-# concurrency:
-#   group: merge-queue-${{ github.head_ref || github.run_id }}
-#   cancel-in-progress: true
-on:
-  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
-  merge_group:
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: true
-      matrix:
-        arch:
-          - all
-          - check
-    runs-on: ubuntu-24.04
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
-          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
-    outputs:
-      all: ${{ steps.jsonStep.outputs.all }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  check:
-    needs: setup
-    strategy:
-      fail-fast: true
-      matrix:
-        check: ${{ fromJson(needs.setup.outputs.check) }}
-
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    steps:
-      - uses: actions/checkout@v5
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.check.board }}
-        run: bin/check-all.sh ${{ matrix.check.board }}
-
-  build:
-    needs: [setup, version]
-    strategy:
-      matrix:
-        build: ${{ fromJson(needs.setup.outputs.all) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.build.board }}
-      platform: ${{ matrix.build.platform }}
-
-  build-debian-src:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker:
-    strategy:
-      fail-fast: false
-      matrix:
-        distro: [debian, alpine]
-        platform: [linux/amd64, linux/arm64, linux/arm/v7]
-        pio_env: [native, native-tft]
-        exclude:
-          - distro: alpine
-            platform: linux/arm/v7
-          - pio_env: native-tft
-            platform: linux/arm64
-          - pio_env: native-tft
-            platform: linux/arm/v7
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: ${{ matrix.distro }}
-      platform: ${{ matrix.platform }}
-      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
-      pio_env: ${{ matrix.pio_env }}
-      push: false
-
-  gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs: [version, build]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v6
-        with:
-          path: ./
-          pattern: firmware-${{matrix.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v6
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v6
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v6
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v6
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v6
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,14 +24,14 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -1,24 +0,0 @@
-name: Check PR Labels
-
-on:
-  pull_request:
-    types: [opened, edited, labeled, unlabeled, synchronize, reopened]
-
-permissions:
-  pull-requests: read
-  contents: read
-
-jobs:
-  check-label:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Check for PR labels
-        uses: actions/github-script@v8
-        with:
-          script: |
-            const labels = context.payload.pull_request.labels.map(label => label.name);
-            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
-            const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
-            if (!hasRequiredLabel) {
-              core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);
-            }

.github/workflows/pr_tests.yml

@@ -1,238 +0,0 @@
-name: Tests
-
-# DISABLED: Changed from automatic PR triggers to manual only
-on:
-  workflow_dispatch:
-    inputs:
-      reason:
-        description: "Reason for manual test run"
-        required: false
-        default: "Manual test execution"
-
-concurrency:
-  group: tests-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-permissions:
-  contents: read
-  actions: read
-  checks: write
-  pull-requests: write
-
-jobs:
-  native-tests:
-    name: "🧪 Native Tests"
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/test_native.yml
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-
-  test-summary:
-    name: "📊 Test Results"
-    runs-on: ubuntu-latest
-    needs: [native-tests]
-    if: always()
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-      pull-requests: write
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Download test artifacts
-        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v6
-        with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
-          merge-multiple: true
-
-      - name: Parse test results and create detailed summary
-        id: test-results
-        run: |
-          echo "## 🧪 Test Results Summary" >> $GITHUB_STEP_SUMMARY
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Check overall job status first
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "✅ **Overall Status**: PASSED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "failure" ]]; then
-            echo "❌ **Overall Status**: FAILED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "cancelled" ]]; then
-            echo "⏸️ **Overall Status**: CANCELLED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were cancelled before completion." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          else
-            echo "⚠️ **Overall Status**: SKIPPED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were skipped." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Parse detailed test results if available
-          if [ -f "testreport.xml" ]; then
-            echo "### 🔍 Individual Test Results" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            
-            python3 << 'EOF'
-          import xml.etree.ElementTree as ET
-          import os
-
-          try:
-              tree = ET.parse('testreport.xml')
-              root = tree.getroot()
-              
-              total_tests = 0
-              passed_tests = 0
-              failed_tests = 0
-              skipped_tests = 0
-              
-              # Parse testsuite elements
-              for testsuite in root.findall('.//testsuite'):
-                  suite_name = testsuite.get('name', 'Unknown')
-                  suite_tests = int(testsuite.get('tests', '0'))
-                  suite_failures = int(testsuite.get('failures', '0'))
-                  suite_errors = int(testsuite.get('errors', '0'))
-                  suite_skipped = int(testsuite.get('skipped', '0'))
-                  
-                  total_tests += suite_tests
-                  failed_tests += suite_failures + suite_errors
-                  skipped_tests += suite_skipped
-                  passed_tests += suite_tests - suite_failures - suite_errors - suite_skipped
-                  
-                  if suite_tests > 0:
-                      status = "✅" if (suite_failures + suite_errors) == 0 else "❌"
-                      print(f"**{status} Test Suite: {suite_name}**")
-                      print(f"- Total: {suite_tests}")
-                      print(f"- Passed: ✅ {suite_tests - suite_failures - suite_errors - suite_skipped}")
-                      print(f"- Failed: ❌ {suite_failures + suite_errors}")
-                      if suite_skipped > 0:
-                          print(f"- Skipped: ⏭️ {suite_skipped}")
-                      print("")
-                      
-                      # Show individual test results for failed suites
-                      if suite_failures + suite_errors > 0:
-                          print("**Failed Tests:**")
-                          for testcase in testsuite.findall('testcase'):
-                              test_name = testcase.get('name', 'Unknown')
-                              failure = testcase.find('failure')
-                              error = testcase.find('error')
-                              
-                              if failure is not None:
-                                  msg = failure.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: {msg}")
-                              elif error is not None:
-                                  msg = error.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: ERROR - {msg}")
-                          print("")
-                      else:
-                          # Show passed tests for successful suites
-                          passed_count = 0
-                          for testcase in testsuite.findall('testcase'):
-                              if testcase.find('failure') is None and testcase.find('error') is None:
-                                  if passed_count < 5:  # Limit to first 5 to avoid spam
-                                      test_name = testcase.get('name', 'Unknown')
-                                      print(f"- ✅ `{test_name}`: PASSED")
-                                  passed_count += 1
-                          if passed_count > 5:
-                              print(f"- ... and {passed_count - 5} more tests passed")
-                          print("")
-              
-              # Summary statistics
-              print("### 📊 Test Statistics")
-              print(f"- **Total Tests**: {total_tests}")
-              print(f"- **Passed**: ✅ {passed_tests}")
-              print(f"- **Failed**: ❌ {failed_tests}")
-              if skipped_tests > 0:
-                  print(f"- **Skipped**: ⏭️ {skipped_tests}")
-              
-              if failed_tests > 0:
-                  print(f"\n❌ **{failed_tests} tests failed out of {total_tests} total**")
-              else:
-                  print(f"\n✅ **All {total_tests} tests passed!**")
-                  
-          except Exception as e:
-              print(f"❌ Error parsing test results: {e}")
-          EOF
-          else
-            echo "⚠️ **No detailed test report available**" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Test artifacts may not have been generated properly." >> $GITHUB_STEP_SUMMARY
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-          echo "---" >> $GITHUB_STEP_SUMMARY
-          echo "View detailed logs in the [Actions tab](${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }})" >> $GITHUB_STEP_SUMMARY
-
-      - name: Comment test results on PR
-        if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v8
-        with:
-          script: |
-            const fs = require('fs');
-
-            // Read the step summary to use as PR comment
-            let testSummary = "## 🧪 Test Results Summary\n\n";
-
-            if ("${{ needs.native-tests.result }}" === "success") {
-              testSummary += "✅ **All tests passed!**\n\n";
-            } else if ("${{ needs.native-tests.result }}" === "failure") {
-              testSummary += "❌ **Some tests failed.**\n\n";
-            } else {
-              testSummary += "⚠️ **Tests did not complete normally.**\n\n";
-            }
-
-            testSummary += `View detailed results: [Actions Run](${context.payload.repository.html_url}/actions/runs/${context.runId})\n\n`;
-            testSummary += "---\n";
-            testSummary += "*This comment will be automatically updated when new commits are pushed.*";
-
-            // Find existing comment
-            const comments = await github.rest.issues.listComments({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              issue_number: context.issue.number
-            });
-
-            const botComment = comments.data.find(comment => 
-              comment.user.type === 'Bot' && 
-              comment.body.includes('🧪 Test Results Summary')
-            );
-
-            if (botComment) {
-              // Update existing comment
-              await github.rest.issues.updateComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                comment_id: botComment.id,
-                body: testSummary
-              });
-            } else {
-              // Create new comment
-              await github.rest.issues.createComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: context.issue.number,
-                body: testSummary
-              });
-            }
-
-      - name: Set overall status
-        run: |
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "All tests passed! ✅"
-            exit 0
-          else
-            echo "Some tests failed! ❌"
-            exit 1
-          fi

.github/workflows/release_channels.yml

@@ -20,11 +20,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series:
-          - jammy # 22.04 LTS
-          - noble # 24.04 LTS
-          - plucky # 25.04
-          - questing # 25.10
+        series: [plucky, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -60,10 +56,10 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -103,9 +99,8 @@ jobs:
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version
-          labels: github_actions
           title: Bump release version
-          commit-message: Automated version bumps
+          commit-message: automated bumps
           add-paths: |
             version.properties
             debian/changelog

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # step 2
       - name: full scan
@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: report.sarif
           overwrite: true
@@ -41,7 +41,7 @@ jobs:
 
       # step 4
       - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v4
+        uses: github/codeql-action/upload-sarif@v3
         with:
           sarif_file: report.sarif
           category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -17,10 +17,8 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.1.0
+        uses: actions/stale@v9.1.0
         with:
           days-before-stale: 45
-          stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
-          close-issue-message: This issue has not had any comment since the last notice. It has been closed automatically. If this is incorrect, or the issue becomes relevant again, please request that it is reopened.
-          exempt-issue-labels: pinned,3.0,triaged,backlog
-          exempt-pr-labels: pinned,3.0,triaged,backlog
+          exempt-issue-labels: pinned,3.0
+          exempt-pr-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -40,7 +40,7 @@ jobs:
 
       - name: Integration test
         run: |
-          .pio/build/coverage/program -s &
+          .pio/build/coverage/program &
           PID=$!
           timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
           echo "Simulator started, launching python test..."
@@ -59,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -94,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
@@ -108,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,7 +137,7 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v4
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
@@ -150,7 +150,7 @@ jobs:
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v4
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # - uses: actions/setup-python@v5
       #   with:
@@ -47,9 +47,9 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v6
+        uses: actions/setup-node@v4
         with:
-          node-version: 24
+          node-version: 22
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -39,7 +39,7 @@ jobs:
           git push
 
       - name: Comment on PR
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: true
 
@@ -34,9 +34,7 @@ jobs:
         uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
-          labels: submodules
           title: Update protobufs and classes
-          commit-message: Update protobufs
           add-paths: |
             protobufs
             src/mesh

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.25.0
+  version: 1.24.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.3
+      ref: v1.7.1
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.489
-    - renovate@41.169.1
+    - checkov@3.2.450
+    - renovate@41.29.1
     - prettier@3.6.2
-    - trufflehog@3.90.12
+    - trufflehog@3.89.2
     - yamllint@1.37.1
     - bandit@1.8.6
-    - trivy@0.67.2
-    - taplo@0.10.0
-    - ruff@0.14.3
-    - isort@7.0.0
+    - trivy@0.64.1
+    - taplo@0.9.3
+    - ruff@0.12.2
+    - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.8
+    - actionlint@1.7.7
     - flake8@7.3.0
-    - hadolint@2.14.0
+    - hadolint@2.12.1-beta
     - shfmt@3.6.0
-    - shellcheck@0.11.0
-    - black@25.9.0
+    - shellcheck@0.10.0
+    - black@25.1.0
     - git-diff-check
-    - gitleaks@8.28.0
+    - gitleaks@8.27.2
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.14-slim-trixie AS builder
+FROM python:3.13-bookworm AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -36,7 +36,7 @@ RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/fir
 
 ##### PRODUCTION BUILD #############
 
-FROM debian:trixie-slim
+FROM debian:bookworm-slim
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
       org.opencontainers.image.url="https://meshtastic.org" \
@@ -51,8 +51,8 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7t64 libssl3t64 \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7 libssl3 \
         libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
@@ -61,7 +61,7 @@ RUN apt-get update && apt-get --no-install-recommends -y install \
 
 # Fetch compiled binary from the builder
 COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/web/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 

alpine.Dockerfile

@@ -3,13 +3,12 @@
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.14-alpine3.22 AS builder
+FROM python:3.13-alpine3.22 AS builder
 ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
 
 RUN apk --no-cache add \
-        bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
-        libgpiod-dev yaml-cpp-dev bluez-dev \
+        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
         libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
@@ -41,8 +40,8 @@ LABEL org.opencontainers.image.title="Meshtastic" \
 USER root
 
 RUN apk --no-cache add \
-        shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
-        i2c-tools libuv libx11 libinput libxkbcommon \
+        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
+        libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

arch/esp32/esp32.ini

@@ -31,13 +31,11 @@ build_flags =
   -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
   -DAXP_DEBUG_PORT=Serial
   -DCONFIG_BT_NIMBLE_ENABLED
-  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
   -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
-  -DSERIAL_HAS_ON_RECEIVE
   -DLIBPAX_ARDUINO
   -DLIBPAX_WIFI
   -DLIBPAX_BLE
@@ -56,8 +54,8 @@ lib_deps =
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.1.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.0
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/esp32/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.1
+  lewisxhe/XPowersLib@0.3.0
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -23,7 +23,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/f566d364204416cdbf298e349213f7d551f793d9.zip
+  https://github.com/meshtastic/platform-native/archive/6cb7a455b440dd0738e8ed74a18136ed5cf7ea63.zip
 framework = arduino
 
 build_src_filter = 
@@ -17,6 +17,7 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
+  +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
@@ -31,17 +32,14 @@ lib_deps =
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
-  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 build_flags =
   ${arduino_base.build_flags}
-  -D ARCH_PORTDUINO
   -fPIC
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST=1
+  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.3.0
+  platformio/ststm32@19.2.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
@@ -23,23 +23,14 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN=1
   -DMESHTASTIC_EXCLUDE_MQTT=1
   -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_GPS=1
   -DMESHTASTIC_EXCLUDE_WIFI=1
   -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
-  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
-  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
   -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
-  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
+  ;-DDEBUG_MUTE
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_LR11X0=1
-  -DHAL_DAC_MODULE_ONLY
-  -DHAL_RNG_MODULE_ENABLED
-  -Wl,--wrap=__assert_func
-  -Wl,--wrap=strerror
-  -Wl,--wrap=_tzset_unlocked_r
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
@@ -53,7 +44,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
 
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
+  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
   OneButton

bin/build-firmware.sh

@@ -1,5 +1,7 @@
 #!/usr/bin/env bash
 
+sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
 export PIP_BREAK_SYSTEM_PACKAGES=1
 
 if (echo $2 | grep -q "esp32"); then
@@ -9,7 +11,7 @@ elif (echo $2 | grep -q "nrf52"); then
 elif (echo $2 | grep -q "stm32"); then
   bin/build-stm32.sh $1
 elif (echo $2 | grep -q "rpi2040"); then
-  bin/build-rp2xx0.sh $1
+  bin/build-rpi2040.sh $1
 else
   echo "Unknown target $2"
   exit 1

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,8 +0,0 @@
-Lora:
-  ### RAK13300in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  spidev: spidev0.1
-  # CS: 7

bin/config.d/lora-RAK6421.yaml

@@ -9,4 +9,13 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
-  # CS: 8
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/device-install.bat

@@ -7,7 +7,6 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
-SET "MUIDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
@@ -15,12 +14,11 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv heltec-v4"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv heltec-v4"
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
 
 GOTO getopts
 :help
@@ -102,6 +100,7 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
@@ -121,10 +120,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -142,7 +142,7 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %BPS_RESET% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL 1200 --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
@@ -164,15 +164,6 @@ FOR %%a IN (%BIGDB_8MB%) DO (
 )
 :end_loop_bigdb_8mb
 
-FOR %%a IN (%MUIDB_8MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %MUIDB_8MB%.
-        SET "MUIDB8=1"
-        GOTO end_loop_muidb_8mb
-    )
-)
-:end_loop_muidb_8mb
-
 FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %BIGDB_16MB%.
@@ -183,7 +174,6 @@ FOR %%a IN (%BIGDB_16MB%) DO (
 :end_loop_bigdb_16mb
 
 IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
-IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
 IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
@@ -228,12 +218,6 @@ IF %BIGDB8% EQU 1 (
     SET "SPIFFS_OFFSET=0x670000"
 )
 
-@REM Offsets for MUIDB 8mb.
-IF %MUIDB8% EQU 1 (
-    SET "OTA_OFFSET=0x5D0000"
-    SET "SPIFFS_OFFSET=0x670000"
-)
-
 @REM Offsets for BigDB 16mb.
 IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"

bin/device-install.sh

@@ -1,60 +1,52 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
-# Constants
-RESET_BAUD=1200
-FIRMWARE_OFFSET=0x00
-
 # Variant groups
 BIGDB_8MB=(
-    "crowpanel-esp32s3"
-    "heltec_capsule_sensor_v3"
-    "heltec-v3"
-    "heltec-vision-master-e213"
-    "heltec-vision-master-e290"
-    "heltec-vision-master-t190"
-    "heltec-wireless-paper"
-    "heltec-wireless-tracker"
-    "heltec-wsl-v3"
-    "icarus"
-    "seeed-xiao-s3"
-    "tbeam-s3-core"
-    "tracksenger"
-)
-MUIDB_8MB=(
-    "picomputer-s3"
-    "unphone"
-    "seeed-sensecap-indicator"
+	"picomputer-s3"
+	"unphone"
+	"seeed-sensecap-indicator"
+	"crowpanel-esp32s3"
+	"heltec_capsule_sensor_v3"
+	"heltec-v3"
+	"heltec-vision-master-e213"
+	"heltec-vision-master-e290"
+	"heltec-vision-master-t190"
+	"heltec-wireless-paper"
+	"heltec-wireless-tracker"
+	"heltec-wsl-v3"
+	"icarus"
+	"seeed-xiao-s3"
+	"tbeam-s3-core"
+	"tracksenger"
 )
 BIGDB_16MB=(
-    "dreamcatcher"
-    "elecrow-adv"
-    "ESP32-S3-Pico"
-    "heltec-v4"
-    "m5stack-cores3"
-    "mesh-tab"
-    "station-g2"
-    "t-deck"
-    "t-energy-s3"
+	"t-deck"
+	"mesh-tab"
+	"t-energy-s3"
+	"dreamcatcher"
+	"ESP32-S3-Pico"
+	"m5stack-cores3"
+	"station-g2"
     "t-eth-elite"
     "t-watch-s3"
-    "tlora-pager"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
 )
 S3_VARIANTS=(
     "s3"
     "-v3"
-    "-v4"
     "t-deck"
     "wireless-paper"
     "wireless-tracker"
     "station-g2"
     "unphone"
     "t-eth-elite"
-    "tlora-pager"
     "mesh-tab"
     "dreamcatcher"
     "ESP32-S3-Pico"
@@ -114,8 +106,8 @@ while [ $# -gt 0 ]; do
         shift
         ;;
     --1200bps-reset)
-        BPS_RESET=true
-        ;;
+		    BPS_RESET=true
+		    ;;
     --) # Stop parsing options
         shift
         break
@@ -129,7 +121,7 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
 	exit 0
 fi
 
@@ -166,13 +158,6 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         fi
     done
 
-    for variant in "${MUIDB_8MB[@]}"; do
-        if [ -z "${FILENAME##*"$variant"*}" ]; then
-            OFFSET=0x670000
-            OTA_OFFSET=0x5D0000
-        fi
-    done
-
     # littlefs* offset for BigDB 16mb and OTA OFFSET.
     for variant in "${BIGDB_16MB[@]}"; do
         if [ -z "${FILENAME##*"$variant"*}" ]; then
@@ -216,8 +201,8 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase-flash
-    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD erase_flash
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
     $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"

bin/device-update.bat

@@ -6,8 +6,6 @@ SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
-SET "RESET_BAUD=1200"
-SET "UPDATE_OFFSET=0x10000"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "CHANGE_MODE=0"
@@ -87,13 +85,14 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=""!PYTHON!"" -m esptool"
+    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -106,11 +105,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-CALL :LOG_MESSAGE DEBUG "esptool exit code: %ERRORLEVEL%"
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -128,13 +127,13 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %CHANGE_MODE% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !RESET_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
 @REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET !UPDATE_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !UPDATE_OFFSET! "!FILENAME!" || GOTO eof
+CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -146,9 +145,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase-flash|write-flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-update.sh

@@ -1,13 +1,8 @@
-#!/usr/bin/env bash
+#!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
 
-# Constants
-FLASH_BAUD=115200
-RESET_BAUD=1200
-UPDATE_OFFSET=0x10000
-
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
     ESPTOOL_CMD="$PYTHON -m esptool"
@@ -69,7 +64,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
     exit 0
 fi
 
@@ -80,7 +75,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -1,75 +1,51 @@
-#!/usr/bin/env python3
+#!/usr/bin/env python
 
 """Generate the CI matrix."""
 
-import argparse
+import configparser
 import json
-import re
-from platformio.project.config import ProjectConfig
+import os
+import sys
+import random
 
-parser = argparse.ArgumentParser(description="Generate the CI matrix")
-parser.add_argument("platform", help="Platform to build for")
-parser.add_argument(
-  "--level",
-  choices=["extra", "pr"],
-  nargs="*",
-  default=[],
-  help="Board level to build for (omit for full release boards)",
-)
-args = parser.parse_args()
+rootdir = "variants/"
+
+options = sys.argv[1:]
 
 outlist = []
 
-cfg = ProjectConfig.get_instance()
-pio_envs = cfg.envs()
+if len(options) < 1:
+    print(json.dumps(outlist))
+    exit()
 
-# Gather all PlatformIO environments for filtering later
-all_envs = []
-for pio_env in pio_envs:
-  env_build_flags = cfg.get(f"env:{pio_env}", "build_flags")
-  env_platform = None
-  for flag in env_build_flags:
-    # Extract the platform from the build flags
-    # Example flag: -I variants/esp32s3/heltec-v3
-    match = re.search(r"-I\s?variants/([^/]+)", flag)
-    if match:
-      env_platform = match.group(1)
-      break
-  # Intentionally fail if platform cannot be determined
-  if not env_platform:
-    print(f"Error: Could not determine platform for environment '{pio_env}'")
-    exit(1)
-  # Store env details as a dictionary, and add to 'all_envs' list
-  env = {
-    "ci": {"board": pio_env, "platform": env_platform},
-    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
-    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
-  }
-  all_envs.append(env)
-
-# Filter outputs based on options
-# Check is mutually exclusive with other options (except 'pr')
-if "check" in args.platform:
-  for env in all_envs:
-    if env["board_check"]:
-      if "pr" in args.level:
-        if env["board_level"] == "pr":
-          outlist.append(env["ci"])
-      else:
-        outlist.append(env["ci"])
-# Filter (non-check) builds by platform
+for subdir, dirs, files in os.walk(rootdir):
+    for file in files:
+        if file == "platformio.ini":
+            config = configparser.ConfigParser()
+            config.read(subdir + "/" + file)
+            for c in config.sections():
+                if c.startswith("env:"):
+                    section = config[c].name[4:]
+                    if "extends" in config[config[c].name]:
+                        if options[0] + "_base" in config[config[c].name]["extends"]:
+                            if "board_level" in config[config[c].name]:
+                                if (
+                                    config[config[c].name]["board_level"] == "extra"
+                                ) & ("extra" in options):
+                                    outlist.append(section)
+                            else:
+                                outlist.append(section)
+                        # Add the TFT variants if the base variant is selected
+                        elif section.replace("-tft", "") in outlist and config[config[c].name].get("board_level") != "extra":
+                            outlist.append(section)
+                        elif section.replace("-inkhud", "") in outlist and config[config[c].name].get("board_level") != "extra":
+                            outlist.append(section)
+                    if "board_check" in config[config[c].name]:
+                        if (config[config[c].name]["board_check"] == "true") & (
+                            "check" in options
+                        ):
+                            outlist.append(section)
+if ("quick" in options) & (len(outlist) > 3):
+    print(json.dumps(random.sample(outlist, 3)))
 else:
-  for env in all_envs:
-    if args.platform == env["ci"]["platform"] or args.platform == "all":
-      # Always include board_level = 'pr'
-      if env["board_level"] == "pr":
-        outlist.append(env["ci"])
-      # Include board_level = 'extra' when requested
-      elif "extra" in args.level and env["board_level"] == "extra":
-        outlist.append(env["ci"])
-      # If no board level is specified, include in release builds (not PR)
-      elif "pr" not in args.level and not env["board_level"]:
-        outlist.append(env["ci"])
-
-# Return as a JSON list
-print(json.dumps(outlist))
+    print(json.dumps(outlist))

bin/kill-github-actions.sh

@@ -1,116 +0,0 @@
-#!/bin/bash
-
-# Script to cancel all running GitHub Actions workflows
-# Requires GitHub CLI (gh) to be installed and authenticated
-
-set -e
-
-# Colors for output
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-NC='\033[0m' # No Color
-
-# Function to print colored output
-print_status() {
-    echo -e "${GREEN}[INFO]${NC} $1"
-}
-
-print_warning() {
-    echo -e "${YELLOW}[WARN]${NC} $1"
-}
-
-print_error() {
-    echo -e "${RED}[ERROR]${NC} $1"
-}
-
-# Check if gh CLI is installed
-if ! command -v gh &> /dev/null; then
-    print_error "GitHub CLI (gh) is not installed. Please install it first:"
-    echo "  brew install gh"
-    echo "  Or visit: https://cli.github.com/"
-    exit 1
-fi
-
-# Check if authenticated
-if ! gh auth status &> /dev/null; then
-    print_error "GitHub CLI is not authenticated. Please run:"
-    echo "  gh auth login"
-    exit 1
-fi
-
-# Get repository info
-REPO=$(gh repo view --json owner,name -q '.owner.login + "/" + .name')
-if [[ -z "$REPO" ]]; then
-    print_error "Could not determine repository. Make sure you're in a GitHub repository."
-    exit 1
-fi
-
-print_status "Working with repository: $REPO"
-
-# Get all active workflows (both queued and in-progress)
-print_status "Fetching active workflows (queued and in-progress)..."
-QUEUED_WORKFLOWS=$(gh run list --status queued --json databaseId,displayTitle,headBranch,status --limit 100)
-IN_PROGRESS_WORKFLOWS=$(gh run list --status in_progress --json databaseId,displayTitle,headBranch,status --limit 100)
-
-# Combine both lists
-ALL_WORKFLOWS=$(echo "$QUEUED_WORKFLOWS $IN_PROGRESS_WORKFLOWS" | jq -s 'add | unique_by(.databaseId)')
-
-if [[ "$ALL_WORKFLOWS" == "[]" ]]; then
-    print_status "No active workflows found."
-    exit 0
-fi
-
-# Parse and display active workflows
-echo
-print_warning "Found active workflows:"
-echo "$ALL_WORKFLOWS" | jq -r '.[] | "  - \(.displayTitle) (Branch: \(.headBranch), Status: \(.status), ID: \(.databaseId))"'
-
-echo
-read -p "Do you want to cancel ALL these workflows? (y/N): " -n 1 -r
-echo
-
-if [[ ! $REPLY =~ ^[Yy]$ ]]; then
-    print_status "Cancelled by user."
-    exit 0
-fi
-
-# Cancel each workflow
-print_status "Cancelling workflows..."
-CANCELLED_COUNT=0
-FAILED_COUNT=0
-
-while IFS= read -r WORKFLOW_ID; do
-    if [[ -n "$WORKFLOW_ID" ]]; then
-        print_status "Cancelling workflow ID: $WORKFLOW_ID"
-        if gh run cancel "$WORKFLOW_ID" 2>/dev/null; then
-            ((CANCELLED_COUNT++))
-        else
-            print_error "Failed to cancel workflow ID: $WORKFLOW_ID"
-            ((FAILED_COUNT++))
-        fi
-    fi
-done < <(echo "$ALL_WORKFLOWS" | jq -r '.[].databaseId')
-
-echo
-print_status "Summary:"
-echo "  - Cancelled: $CANCELLED_COUNT workflows"
-if [[ $FAILED_COUNT -gt 0 ]]; then
-    echo "  - Failed: $FAILED_COUNT workflows"
-fi
-
-print_status "Done!"
-
-# Optional: Show remaining active workflows
-echo
-print_status "Checking for any remaining active workflows..."
-REMAINING_QUEUED=$(gh run list --status queued --json databaseId --limit 10)
-REMAINING_IN_PROGRESS=$(gh run list --status in_progress --json databaseId --limit 10)
-REMAINING_ALL=$(echo "$REMAINING_QUEUED $REMAINING_IN_PROGRESS" | jq -s 'add | unique_by(.databaseId)')
-
-if [[ "$REMAINING_ALL" == "[]" ]]; then
-    print_status "All workflows successfully cancelled."
-else
-    REMAINING_COUNT=$(echo "$REMAINING_ALL" | jq '. | length')
-    print_warning "Still $REMAINING_COUNT workflows active (may take a moment to update status)"
-fi

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,42 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.15" date="2025-11-13">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
-    </release>
-    <release version="2.7.14" date="2025-11-03">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.14</url>
-    </release>
-    <release version="2.7.13" date="2025-10-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.13</url>
-    </release>
-    <release version="2.7.12" date="2025-10-01">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.12</url>
-    </release>
-    <release version="2.7.11" date="2025-09-24">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.11</url>
-    </release>
-    <release version="2.7.10" date="2025-09-18">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.10</url>
-    </release>
-    <release version="2.7.9" date="2025-09-03">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.9</url>
-    </release>
-    <release version="2.7.8" date="2025-08-30">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
-    </release>
-    <release version="2.7.7" date="2025-08-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
-    </release>
-    <release version="2.7.6" date="2025-08-12">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
-    </release>
-    <release version="2.7.5" date="2025-08-09">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.5</url>
-    </release>
-    <release version="2.7.4" date="2025-07-19">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.4</url>
-    </release>
     <release version="2.7.3" date="2025-07-10">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.3</url>
     </release>

bin/platformio-custom.py

@@ -3,11 +3,8 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
-import subprocess
 import json
 import re
-import time
-from datetime import datetime
 
 from readprops import readProps
 
@@ -86,7 +83,7 @@ if platform.name == "espressif32":
 
 if platform.name == "nordicnrf52":
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py \"$BUILD_DIR/firmware.hex\" -c -f 0xADA52840 -o \"$BUILD_DIR/firmware.uf2\"",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
                                         "Generating UF2 file"))
 
 Import("projenv")
@@ -95,17 +92,6 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
-# get repository owner if git is installed
-try:
-    r_owner = (
-        subprocess.check_output(["git", "config", "--get", "remote.origin.url"])
-        .decode("utf-8")
-        .strip().split("/")
-    )
-    repo_owner = r_owner[-2] + "/" + r_owner[-1].replace(".git", "")
-except subprocess.CalledProcessError:
-    repo_owner = "unknown"
-
 jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
 with open(jsonLoc) as f:
     jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
@@ -127,16 +113,10 @@ for pref in userPrefs:
         pref_flags.append("-D" + pref + "=" + env.StringifyMacro(userPrefs[pref]) + "")
 
 # General options that are passed to the C and C++ compilers
-# Calculate unix epoch for current day (midnight)
-current_date = datetime.now().replace(hour=0, minute=0, second=0, microsecond=0)
-build_epoch = int(current_date.timestamp())
-
 flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
-        "-DAPP_REPO=" + repo_owner,
-        "-DBUILD_EPOCH=" + str(build_epoch),
     ] + pref_flags
 
 print ("Using flags:")

bin/web.version

@@ -1 +1 @@
-2.6.7
+2.6.4

boards/heltec_mesh_solar.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x0071"]
-    ],
-    "usb_product": "HT-n5262",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_solar",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/project/meshsolar/",
-  "vendor": "Heltec"
-}

boards/heltec_v4.json

@@ -1,43 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_16MB.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "psram_type": "qspi",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "heltec_v4"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "heltec_wifi_lora_32 v4 (16 MB FLASH, 2 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 2097152,
-    "maximum_size": 16777216,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://heltec.org/",
-  "vendor": "heltec"
-}

boards/heltec_wireless_tracker_v2.json

@@ -1,37 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "heltec_wireless_tracker_v2"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "Heltec Wireless Tracker V2",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 8388608,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://heltec.org",
-  "vendor": "Heltec"
-}

boards/meshtiny.json

@@ -1,52 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "MeshTiny",
-    "mcu": "nrf52840",
-    "variant": "meshtiny",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino", "freertos"],
-  "name": "MeshTiny",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://github.com/meshtastic/firmware",
-  "vendor": "MTools Tec"
-}

boards/r1-neo.json

@@ -1,52 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "Muzi R1 Neo",
-    "mcu": "nrf52840",
-    "variant": "r1-neo",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino", "freertos"],
-  "name": "WisCore RAK4631 Board",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://muzi.works/",
-  "vendor": "Muzi Works"
-}

boards/seeed-sensecap-indicator.json

@@ -2,7 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "partition-table-8MB.csv",
+      "partitions": "default_8MB.csv",
       "memory_type": "qio_opi"
     },
     "core": "esp32",

boards/t-deck-pro.json

@@ -1,43 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_qspi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo T-Deck Pro S3 (16M Flash 8M QSPI PSRAM )",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "monitor": {
-    "speed": 115200
-  },
-  "url": "https://lilygo.cc/products/t-deck-pro",
-  "vendor": "LilyGo"
-}

boards/unphone.json

@@ -3,7 +3,7 @@
     "arduino": {
       "ldscript": "esp32s3_out.ld",
       "memory_type": "qio_opi",
-      "partitions": "partition-table-8MB.csv"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [

boards/wiscore_rak3172.json

@@ -5,7 +5,7 @@
     },
     "core": "stm32",
     "cpu": "cortex-m4",
-    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_RAK3172_MODULE",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
     "f_cpu": "48000000L",
     "mcu": "stm32wle5ccu",
     "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",

debian/changelog

@@ -1,31 +1,34 @@
-meshtasticd (2.7.15.0) unstable; urgency=medium
-
-  * Version 2.7.15
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 13 Nov 2025 12:31:57 +0000
-
-meshtasticd (2.7.14.0) unstable; urgency=medium
-
-  * Version 2.7.14
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 03 Nov 2025 16:11:31 +0000
-
-meshtasticd (2.7.13.0) unstable; urgency=medium
-
-  * Version 2.7.13
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Sat, 11 Oct 2025 15:27:28 +0000
-
-meshtasticd (2.7.12.0) unstable; urgency=medium
+meshtasticd (2.7.3.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
-  * Version 2.5.19
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
 
   [  ]
   * GitHub Actions Automatic version bump
 
-  [ GitHub Actions ]
-  * Version 2.7.12
+  [  ]
+  * GitHub Actions Automatic version bump
 
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 01 Oct 2025 19:51:41 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [ Ubuntu ]
+  * GitHub Actions Automatic version bump
+
+ -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 10 Jul 2025 16:29:27 +0000

debian/ci_changelog.sh

@@ -1,8 +1,7 @@
 #!/usr/bin/bash
-export DEBFULLNAME="GitHub Actions"
 export DEBEMAIL="github-actions[bot]@users.noreply.github.com"
 PKG_VERSION=$(python3 bin/buildinfo.py short)
 
 dch --newversion "$PKG_VERSION.0" \
-	--distribution unstable \
-	"Version $PKG_VERSION"
+	--distribution UNRELEASED \
+	"GitHub Actions Automatic version bump"

debian/control

@@ -3,7 +3,6 @@ Section: misc
 Priority: optional
 Maintainer: Austin Lane <vidplace7@gmail.com>
 Build-Depends: debhelper-compat (= 13),
-               libc6-dev (>= 2.38) | libbsd-dev,
                lsb-release,
                tar,
                gzip,

meshtasticd.spec.rpkg

@@ -33,7 +33,6 @@ BuildRequires: python3dist(grpcio[protobuf])
 BuildRequires: python3dist(grpcio-tools)
 BuildRequires: git-core
 BuildRequires: gcc-c++
-BuildRequires: (glibc-devel >= 2.38) or pkgconfig(libbsd-overlay)
 BuildRequires: pkgconfig(yaml-cpp)
 BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)

partition-table-8MB.csv

@@ -1,7 +0,0 @@
-# This is a layout for 8MB of flash for MUI devices
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x5C0000,
-flashApp, app,  ota_1,   0x5D0000,0x0A0000,
-spiffs,   data, spiffs,  0x670000,0x180000

platformio.ini

@@ -6,8 +6,7 @@ default_envs = tbeam
 
 extra_configs =
 	arch/*/*.ini
-	variants/*/*/platformio.ini
-	variants/*/diy/*/platformio.ini
+	variants/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
 
 description = Meshtastic
@@ -27,6 +26,7 @@ build_flags = -Wno-missing-field-initializers
 	-DUSE_THREAD_NAMES
 	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
 	-DPB_ENABLE_MALLOC=1
+	-DRADIOLIB_LOW_LEVEL=1
 	-DRADIOLIB_EXCLUDE_CC1101=1
 	-DRADIOLIB_EXCLUDE_NRF24=1
 	-DRADIOLIB_EXCLUDE_RF69=1
@@ -53,24 +53,22 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
-	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
+	#-DBUILD_EPOCH=$UNIX_TIME
 	#-D OLED_PL=1
-	#-D DEBUG_HEAP=1 ; uncomment to add free heap space / memory leak debugging logs
-	#-D DEBUG_LOOP_TIMING=1 ; uncomment to add main loop timing logs
 
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
-	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
-	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
+	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
+	mathertel/OneButton@2.6.1
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
 	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
-	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
+	https://github.com/meshtastic/ArduinoThread/archive/7c3ee9e1951551b949763b1f5280f8db1fa4068d.zip
 	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
 	nanopb/Nanopb@0.4.91
 	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
@@ -104,30 +102,21 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
-; Minimal networking libs for nrf52 (excludes Syslog to save flash)
-[nrf52_networking_base]
-lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
-
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	# jgromes/RadioLib@7.4.0
-	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
+	jgromes/RadioLib@7.2.1
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/19b7855e9a1d9deff37391659ca7194e4ef57c43.zip
+	https://github.com/meshtastic/device-ui/archive/86a09a7360f92d10053fbbf8d74f67f85b0ceb09.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.4
+	adafruit/Adafruit BusIO@1.17.2
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
@@ -160,12 +149,12 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
+	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
+	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
-	dfrobot/DFRobot_RTU@1.0.6
+	dfrobot/DFRobot_RTU@1.0.3
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
@@ -177,13 +166,9 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
 	adafruit/Adafruit LTR390 Library@1.1.2
 	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.6
+	adafruit/Adafruit PCT2075@1.0.5
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
-	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.2
-	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/BH1750_WE@^1.1.10
-	wollewald/BH1750_WE@^1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -193,7 +178,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
 	adafruit/Adafruit MAX1704X@1.0.3
 	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
+	adafruit/Adafruit SHTC3 Library@1.0.1
 	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
 	adafruit/Adafruit LPS2X@2.0.6
 	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library

renovate.json

@@ -8,7 +8,6 @@
     "replacements:all",
     "workarounds:all"
   ],
-  "baseBranchPatterns": ["master"],
   "forkProcessing": "enabled",
   "ignoreDeps": [
     "protobufs"

src/AmbientLightingThread.h

@@ -183,9 +183,9 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
 #endif
             pixels.show();
-            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-            //        moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-            //        moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
             analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);

src/AudioThread.h

@@ -11,11 +11,6 @@
 #include <AudioOutputI2S.h>
 #include <ESP8266SAM.h>
 
-#ifdef USE_XL9555
-#include "ExtensionIOXL9555.hpp"
-extern ExtensionIOXL9555 io;
-#endif
-
 #define AUDIO_THREAD_INTERVAL_MS 100
 
 class AudioThread : public concurrency::OSThread
@@ -25,16 +20,12 @@ class AudioThread : public concurrency::OSThread
 
     void beginRttl(const void *data, uint32_t len)
     {
-#ifdef T_LORA_PAGER
-        io.digitalWrite(EXPANDS_AMP_EN, HIGH);
-#endif
         setCPUFast(true);
         rtttlFile = new AudioFileSourcePROGMEM(data, len);
         i2sRtttl = new AudioGeneratorRTTTL();
         i2sRtttl->begin(rtttlFile, audioOut);
     }
 
-    // Also handles actually playing the RTTTL, needs to be called in loop
     bool isPlaying()
     {
         if (i2sRtttl != nullptr) {
@@ -54,9 +45,6 @@ class AudioThread : public concurrency::OSThread
         rtttlFile = nullptr;
 
         setCPUFast(false);
-#ifdef T_LORA_PAGER
-        io.digitalWrite(EXPANDS_AMP_EN, LOW);
-#endif
     }
 
     void readAloud(const char *text)
@@ -67,16 +55,10 @@ class AudioThread : public concurrency::OSThread
             i2sRtttl = nullptr;
         }
 
-#ifdef T_LORA_PAGER
-        io.digitalWrite(EXPANDS_AMP_EN, HIGH);
-#endif
         ESP8266SAM *sam = new ESP8266SAM;
         sam->Say(audioOut, text);
         delete sam;
         setCPUFast(false);
-#ifdef T_LORA_PAGER
-        io.digitalWrite(EXPANDS_AMP_EN, LOW);
-#endif
     }
 
   protected:

src/BluetoothStatus.h

@@ -89,22 +89,14 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, LOW);
-#else
                 digitalWrite(BLE_LED, HIGH);
-#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, HIGH);
-#else
                 digitalWrite(BLE_LED, LOW);
-#endif
 #endif
                 break;
             }

src/DebugConfiguration.cpp

@@ -146,7 +146,7 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
 {
     int result;
 #ifdef ARCH_PORTDUINO
-    bool utf = !portduino_config.ascii_logs;
+    bool utf = !settingsMap[ascii_logs];
 #else
     bool utf = true;
 #endif

src/DebugConfiguration.h

@@ -2,12 +2,6 @@
 
 #include "configuration.h"
 
-// Forward declarations
-#if defined(DEBUG_HEAP)
-class MemGet;
-extern MemGet memGet;
-#endif
-
 // DEBUG LED
 #ifndef LED_STATE_ON
 #define LED_STATE_ON 1
@@ -29,7 +23,6 @@ extern MemGet memGet;
 #define MESHTASTIC_LOG_LEVEL_ERROR "ERROR"
 #define MESHTASTIC_LOG_LEVEL_CRIT "CRIT "
 #define MESHTASTIC_LOG_LEVEL_TRACE "TRACE"
-#define MESHTASTIC_LOG_LEVEL_HEAP "HEAP"
 
 #include "SerialConsole.h"
 
@@ -69,25 +62,6 @@ extern MemGet memGet;
 #endif
 #endif
 
-#if defined(DEBUG_HEAP)
-#define LOG_HEAP(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_HEAP, __VA_ARGS__)
-
-// Macro-based heap debugging
-#define DEBUG_HEAP_BEFORE auto heapBefore = memGet.getFreeHeap();
-#define DEBUG_HEAP_AFTER(context, ptr)                                                                                           \
-    do {                                                                                                                         \
-        auto heapAfter = memGet.getFreeHeap();                                                                                   \
-        if (heapBefore != heapAfter) {                                                                                           \
-            LOG_HEAP("Alloc in %s pointer 0x%x, size: %u, free: %u", context, ptr, heapBefore - heapAfter, heapAfter);           \
-        }                                                                                                                        \
-    } while (0)
-
-#else
-#define LOG_HEAP(...)
-#define DEBUG_HEAP_BEFORE
-#define DEBUG_HEAP_AFTER(context, ptr)
-#endif
-
 /// A C wrapper for LOG_DEBUG that can be used from arduino C libs that don't know about C++ or meshtastic
 extern "C" void logLegacy(const char *level, const char *fmt, ...);
 

src/DisplayFormatters.cpp

@@ -1,14 +1,7 @@
 #include "DisplayFormatters.h"
 
-const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                         bool usePreset)
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
 {
-
-    // If use_preset is false, always return "Custom"
-    if (!usePreset) {
-        return "Custom";
-    }
-
     switch (preset) {
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
         return useShortName ? "ShortT" : "ShortTurbo";
@@ -38,46 +31,4 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
         return useShortName ? "Custom" : "Invalid";
         break;
     }
-}
-
-const char *DisplayFormatters::getDeviceRole(meshtastic_Config_DeviceConfig_Role role)
-{
-    switch (role) {
-    case meshtastic_Config_DeviceConfig_Role_CLIENT:
-        return "Client";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE:
-        return "Client Mute";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_CLIENT_HIDDEN:
-        return "Client Hidden";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_CLIENT_BASE:
-        return "Client Base";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_LOST_AND_FOUND:
-        return "Lost and Found";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_TRACKER:
-        return "Tracker";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_SENSOR:
-        return "Sensor";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_TAK:
-        return "TAK";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_TAK_TRACKER:
-        return "TAK Tracker";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_ROUTER:
-        return "Router";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_ROUTER_LATE:
-        return "Router Late";
-        break;
-    default:
-        return "Unknown";
-        break;
-    }
 }

src/DisplayFormatters.h

@@ -4,7 +4,5 @@
 class DisplayFormatters
 {
   public:
-    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                 bool usePreset);
-    static const char *getDeviceRole(meshtastic_Config_DeviceConfig_Role role);
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
 };

src/GPSStatus.h

@@ -22,9 +22,6 @@ class GPSStatus : public Status
 
     meshtastic_Position p = meshtastic_Position_init_default;
 
-    /// Time of last valid GPS fix (millis since boot)
-    uint32_t lastFixMillis = 0;
-
   public:
     GPSStatus() { statusType = STATUS_TYPE_GPS; }
 
@@ -86,9 +83,6 @@ class GPSStatus : public Status
 
     uint32_t getNumSatellites() const { return p.sats_in_view; }
 
-    /// Return millis() when the last GPS fix occurred (0 = never)
-    uint32_t getLastFixMillis() const { return lastFixMillis; }
-
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_DEBUG
@@ -120,9 +114,6 @@ class GPSStatus : public Status
 
         if (isDirty) {
             if (hasLock) {
-                // Record time of last valid GPS fix
-                lastFixMillis = millis();
-
                 // In debug logs, identify position by @timestamp:stage (stage 3 = notify)
                 LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,

src/NodeStatus.h

@@ -14,16 +14,16 @@ class NodeStatus : public Status
     CallbackObserver<NodeStatus, const NodeStatus *> statusObserver =
         CallbackObserver<NodeStatus, const NodeStatus *>(this, &NodeStatus::updateStatus);
 
-    uint16_t numOnline = 0;
-    uint16_t numTotal = 0;
+    uint8_t numOnline = 0;
+    uint8_t numTotal = 0;
 
-    uint16_t lastNumTotal = 0;
+    uint8_t lastNumTotal = 0;
 
   public:
     bool forceUpdate = false;
 
     NodeStatus() { statusType = STATUS_TYPE_NODE; }
-    NodeStatus(uint16_t numOnline, uint16_t numTotal, bool forceUpdate = false) : Status()
+    NodeStatus(uint8_t numOnline, uint8_t numTotal, bool forceUpdate = false) : Status()
     {
         this->forceUpdate = forceUpdate;
         this->numOnline = numOnline;
@@ -34,11 +34,11 @@ class NodeStatus : public Status
 
     void observe(Observable<const NodeStatus *> *source) { statusObserver.observe(source); }
 
-    uint16_t getNumOnline() const { return numOnline; }
+    uint8_t getNumOnline() const { return numOnline; }
 
-    uint16_t getNumTotal() const { return numTotal; }
+    uint8_t getNumTotal() const { return numTotal; }
 
-    uint16_t getLastNumTotal() const { return lastNumTotal; }
+    uint8_t getLastNumTotal() const { return lastNumTotal; }
 
     bool matches(const NodeStatus *newStatus) const
     {
@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %u online, %u total", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -20,11 +20,6 @@
 #include "meshUtils.h"
 #include "sleep.h"
 
-#if defined(ARCH_PORTDUINO)
-#include "api/WiFiServerAPI.h"
-#include "input/LinuxInputImpl.h"
-#endif
-
 // Working USB detection for powered/charging states on the RAK platform
 #ifdef NRF_APM
 #include "nrfx_power.h"
@@ -125,16 +120,6 @@ NullSensor max17048Sensor;
 RAK9154Sensor rak9154Sensor;
 #endif
 
-#ifdef HAS_PPM
-// note: XPOWERS_CHIP_XXX must be defined in variant.h
-#include <XPowersLib.h>
-XPowersPPM *PPM = NULL;
-#endif
-
-#ifdef HAS_BQ27220
-#include "bq27220.h"
-#endif
-
 #ifdef HAS_PMU
 XPowersLibInterface *PMU = NULL;
 #else
@@ -194,7 +179,7 @@ static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level se
 
 #ifdef BATTERY_PIN
 
-void battery_adcEnable()
+static void adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -214,7 +199,7 @@ void battery_adcEnable()
 #endif
 }
 
-static void battery_adcDisable()
+static void adcDisable()
 {
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -320,7 +305,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             uint32_t raw = 0;
             float scaled = 0;
 
-            battery_adcEnable();
+            adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
@@ -332,7 +317,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
-            battery_adcDisable();
+            adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -562,7 +547,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
                    config.power.device_battery_ina_address) {
             if (!ina226Sensor.isInitialized())
                 return ina226Sensor.runOnce() > 0;
-            return ina226Sensor.isRunning();
         } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
                    config.power.device_battery_ina_address) {
             if (!ina260Sensor.isInitialized())
@@ -681,10 +665,6 @@ bool Power::setup()
         found = true;
     } else if (lipoInit()) {
         found = true;
-    } else if (lipoChargerInit()) {
-        found = true;
-    } else if (meshSolarInit()) {
-        found = true;
     } else if (analogInit()) {
         found = true;
     }
@@ -692,16 +672,6 @@ bool Power::setup()
 #ifdef NRF_APM
     found = true;
 #endif
-#ifdef EXT_PWR_DETECT
-    attachInterrupt(
-        EXT_PWR_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-        },
-        CHANGE);
-#endif
 
     enabled = found;
     low_voltage_counter = 0;
@@ -709,65 +679,9 @@ bool Power::setup()
     return found;
 }
 
-void Power::powerCommandsCheck()
-{
-    if (rebootAtMsec && millis() > rebootAtMsec) {
-        LOG_INFO("Rebooting");
-        reboot();
-    }
-
-    if (shutdownAtMsec && millis() > shutdownAtMsec) {
-        shutdownAtMsec = 0;
-        shutdown();
-    }
-}
-
-void Power::reboot()
-{
-    notifyReboot.notifyObservers(NULL);
-#if defined(ARCH_ESP32)
-    ESP.restart();
-#elif defined(ARCH_NRF52)
-    NVIC_SystemReset();
-#elif defined(ARCH_RP2040)
-    rp2040.reboot();
-#elif defined(ARCH_PORTDUINO)
-    deInitApiServer();
-    if (aLinuxInputImpl)
-        aLinuxInputImpl->deInit();
-    SPI.end();
-    Wire.end();
-    Serial1.end();
-    if (screen) {
-        delete screen;
-        screen = nullptr;
-    }
-    LOG_DEBUG("final reboot!");
-    ::reboot();
-#elif defined(ARCH_STM32WL)
-    HAL_NVIC_SystemReset();
-#else
-    rebootAtMsec = -1;
-    LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
-#endif
-}
-
 void Power::shutdown()
 {
-
-#if HAS_SCREEN
-    if (screen) {
-#ifdef T_DECK_PRO
-        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#else
-        screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
-#endif
-    }
-#endif
-#if !defined(ARCH_STM32WL)
-    playShutdownMelody();
-#endif
-    nodeDB->saveToDisk();
+    LOG_INFO("Shutting Down");
 
 #if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
 #ifdef PIN_LED1
@@ -779,11 +693,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, true, true);
-#elif defined(ARCH_PORTDUINO)
-    exit(EXIT_SUCCESS);
-#else
-    LOG_WARN("FIXME implement shutdown for this platform");
+    doDeepSleep(DELAY_FOREVER, false, false);
 #endif
 }
 
@@ -839,35 +749,23 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
-    if (millis() > lastLogTime + 50 * 1000) {
-        LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(),
-                  powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
-        lastLogTime = millis();
-    }
+    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
+              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        // Use stack-allocated buffer to avoid heap allocations in monitoring code
-        char threadlist[256] = "Threads running:";
-        int threadlistLen = strlen(threadlist);
+        std::string threadlist = "Threads running:";
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                // Use snprintf to safely append to stack buffer without heap allocation
-                int remaining = sizeof(threadlist) - threadlistLen - 1;
-                if (remaining > 0) {
-                    int written = snprintf(threadlist + threadlistLen, remaining, " %s", thread->ThreadName.c_str());
-                    if (written > 0 && written < remaining) {
-                        threadlistLen += written;
-                    }
-                }
+                threadlist += vformat(" %s", thread->ThreadName.c_str());
                 running++;
             }
         }
-        LOG_HEAP(threadlist);
-        LOG_HEAP("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
-                 memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
+        LOG_DEBUG(threadlist.c_str());
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
+                  memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
     }
 #ifdef DEBUG_HEAP_MQTT
@@ -879,19 +777,15 @@ void Power::readPowerStatus()
         sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
         auto newHeap = memGet.getFreeHeap();
-        // Use stack-allocated buffers to avoid heap allocations in monitoring code
-        char heapTopic[128];
-        snprintf(heapTopic, sizeof(heapTopic), "%s/2/heap/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char heapString[16];
-        snprintf(heapString, sizeof(heapString), "%u", newHeap);
-        mqtt->pubSub.publish(heapTopic, heapString, false);
-
+        std::string heapTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+        std::string heapString = std::to_string(newHeap);
+        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
         auto wifiRSSI = WiFi.RSSI();
-        char wifiTopic[128];
-        snprintf(wifiTopic, sizeof(wifiTopic), "%s/2/wifi/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char wifiString[16];
-        snprintf(wifiString, sizeof(wifiString), "%d", wifiRSSI);
-        mqtt->pubSub.publish(wifiTopic, wifiString, false);
+        std::string wifiTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+        std::string wifiString = std::to_string(wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
     }
 #endif
 
@@ -906,8 +800,13 @@ void Power::readPowerStatus()
             low_voltage_counter++;
             LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
             if (low_voltage_counter > 10) {
+#ifdef ARCH_NRF52
+                // We can't trigger deep sleep on NRF52, it's freezing the board
+                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
+#else
                 LOG_INFO("Low voltage detected, trigger deep sleep");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
+#endif
             }
         } else {
             low_voltage_counter = 0;
@@ -1338,213 +1237,3 @@ bool Power::lipoInit()
     return false;
 }
 #endif
-
-#if defined(HAS_PPM) && HAS_PPM
-
-/**
- * Adapter class for BQ25896/BQ27220 Lipo battery charger.
- */
-class LipoCharger : public HasBatteryLevel
-{
-  private:
-    BQ27220 *bq = nullptr;
-
-  public:
-    /**
-     * Init the I2C BQ25896 Lipo battery charger
-     */
-    bool runOnce()
-    {
-        if (PPM == nullptr) {
-            PPM = new XPowersPPM;
-            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
-            if (result) {
-                LOG_INFO("PPM BQ25896 init succeeded");
-                // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // PPM->setSysPowerDownVoltage(3100);
-
-                // Set input current limit, default is 500mA
-                // PPM->setInputCurrentLimit(800);
-
-                // Disable current limit pin
-                // PPM->disableCurrentLimitPin();
-
-                // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                PPM->setChargeTargetVoltage(4288);
-
-                // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // PPM->setPrechargeCurr(64);
-
-                // The premise is that limit pin is disabled, or it will
-                // only follow the maximum charging current set by limit pin.
-                // Set the charging current , Range:0~5056mA ,step:64mA
-                PPM->setChargerConstantCurr(1024);
-
-                // To obtain voltage data, the ADC must be enabled first
-                PPM->enableMeasure();
-
-                // Turn on charging function
-                // If there is no battery connected, do not turn on the charging function
-                PPM->enableCharge();
-            } else {
-                LOG_WARN("PPM BQ25896 init failed");
-                delete PPM;
-                PPM = nullptr;
-                return false;
-            }
-        }
-        if (bq == nullptr) {
-            bq = new BQ27220;
-            bq->setDefaultCapacity(BQ27220_DESIGN_CAPACITY);
-
-            bool result = bq->init();
-            if (result) {
-                LOG_DEBUG("BQ27220 design capacity: %d", bq->getDesignCapacity());
-                LOG_DEBUG("BQ27220 fullCharge capacity: %d", bq->getFullChargeCapacity());
-                LOG_DEBUG("BQ27220 remaining capacity: %d", bq->getRemainingCapacity());
-                return true;
-            } else {
-                LOG_WARN("BQ27220 init failed");
-                delete bq;
-                bq = nullptr;
-                return false;
-            }
-        }
-        return false;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override
-    {
-        return -1;
-        // return bq->getChargePercent(); // don't use BQ27220 for battery percent, it is not calibrated
-    }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return bq->getVoltage(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override
-    {
-        bool isCharging = PPM->isCharging();
-        if (isCharging) {
-            LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
-        } else {
-            if (!PPM->isVbusIn()) {
-                LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
-            }
-        }
-        return isCharging;
-    }
-};
-
-LipoCharger lipoCharger;
-
-/**
- * Init the Lipo battery charger
- */
-bool Power::lipoChargerInit()
-{
-    bool result = lipoCharger.runOnce();
-    LOG_DEBUG("Power::lipoChargerInit lipo sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &lipoCharger;
-    return true;
-}
-
-#else
-/**
- * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::lipoChargerInit()
-{
-    return false;
-}
-#endif
-
-#ifdef HELTEC_MESH_SOLAR
-#include "meshSolarApp.h"
-
-/**
- * meshSolar class for an SMBUS battery sensor.
- */
-class meshSolarBatteryLevel : public HasBatteryLevel
-{
-
-  public:
-    /**
-     * Init the I2C meshSolar battery level sensor
-     */
-    bool runOnce()
-    {
-        meshSolarStart();
-        return true;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return meshSolarGetBatteryPercent(); }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return meshSolarGetBattVoltage(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return meshSolarIsBatteryConnect(); }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override { return meshSolarIsCharging(); }
-};
-
-meshSolarBatteryLevel meshSolarLevel;
-
-/**
- * Init the meshSolar battery level sensor
- */
-bool Power::meshSolarInit()
-{
-    bool result = meshSolarLevel.runOnce();
-    LOG_DEBUG("Power::meshSolarInit mesh solar sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &meshSolarLevel;
-    return true;
-}
-
-#else
-/**
- * The meshSolar battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::meshSolarInit()
-{
-    return false;
-}
-#endif

src/PowerFSM.cpp

@@ -72,7 +72,7 @@ extern Power *power;
 static void shutdownEnter()
 {
     LOG_DEBUG("State: SHUTDOWN");
-    shutdownAtMsec = millis();
+    power->shutdown();
 }
 
 #include "error.h"

src/RedirectablePrint.cpp

@@ -4,7 +4,6 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 #include "main.h"
-#include "memGet.h"
 #include "mesh/generated/meshtastic/mesh.pb.h"
 #include <assert.h>
 #include <cstring>
@@ -58,7 +57,7 @@ size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_l
 #endif
 
 #ifdef ARCH_PORTDUINO
-    bool color = !portduino_config.ascii_logs;
+    bool color = !settingsMap[ascii_logs];
 #else
     bool color = true;
 #endif
@@ -100,7 +99,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
     size_t r = 0;
 
 #ifdef ARCH_PORTDUINO
-    bool color = !portduino_config.ascii_logs;
+    bool color = !settingsMap[ascii_logs];
 #else
     bool color = true;
 #endif
@@ -167,16 +166,6 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         print(thread->ThreadName);
         print("] ");
     }
-
-#ifdef DEBUG_HEAP
-    // Add heap free space bytes prefix before every log message
-#ifdef ARCH_PORTDUINO
-    ::printf("[heap %u] ", memGet.getFreeHeap());
-#else
-    printf("[heap %u] ", memGet.getFreeHeap());
-#endif
-#endif // DEBUG_HEAP
-
     r += vprintf(logLevel, format, arg);
 }
 
@@ -299,7 +288,7 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #if ARCH_PORTDUINO
     // level trace is special, two possible ways to handle it.
     if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
-        if (portduino_config.traceFilename != "") {
+        if (settingsStrings[traceFilename] != "") {
             va_list arg;
             va_start(arg, format);
             try {
@@ -308,18 +297,18 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
             }
             va_end(arg);
         }
-        if (portduino_config.logoutputlevel < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
+        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
             delete[] newFormat;
             return;
         }
     }
-    if (portduino_config.logoutputlevel < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
         delete[] newFormat;
         return;
-    } else if (portduino_config.logoutputlevel < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
+    } else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
         delete[] newFormat;
         return;
-    } else if (portduino_config.logoutputlevel < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
+    } else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
         delete[] newFormat;
         return;
     }

src/SerialConsole.cpp

@@ -6,14 +6,6 @@
 #include "configuration.h"
 #include "time.h"
 
-#if defined(ARDUINO_USB_CDC_ON_BOOT) && ARDUINO_USB_CDC_ON_BOOT
-#define IS_USB_SERIAL
-#ifdef SERIAL_HAS_ON_RECEIVE
-#undef SERIAL_HAS_ON_RECEIVE
-#endif
-#include "HWCDC.h"
-#endif
-
 #ifdef RP2040_SLOW_CLOCK
 #define Port Serial2
 #else
@@ -30,12 +22,7 @@ SerialConsole *console;
 
 void consoleInit()
 {
-    auto sc = new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
-
-#if defined(SERIAL_HAS_ON_RECEIVE)
-    // onReceive does only exist for HardwareSerial not for USB CDC serial
-    Port.onReceive([sc]() { sc->rxInt(); });
-#endif
+    new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
     DEBUG_PORT.rpInit(); // Simply sets up semaphore
 }
 
@@ -50,7 +37,6 @@ void consolePrintf(const char *format, ...)
 
 SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), concurrency::OSThread("SerialConsole")
 {
-    api_type = TYPE_SERIAL;
     assert(!console);
     console = this;
     canWrite = false; // We don't send packets to our port until it has talked to us first
@@ -78,22 +64,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
 
 int32_t SerialConsole::runOnce()
 {
-#ifdef HELTEC_MESH_SOLAR
-    // After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
-    if (moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port &&
-        moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG) {
-        return 250;
-    }
-#endif
-
-    int32_t delay = runOncePart();
-#if defined(SERIAL_HAS_ON_RECEIVE) || defined(CONFIG_IDF_TARGET_ESP32S2)
-    return Port.available() ? delay : INT32_MAX;
-#elif defined(IS_USB_SERIAL)
-    return HWCDC::isPlugged() ? delay : (1000 * 20);
-#else
-    return delay;
-#endif
+    return runOncePart();
 }
 
 void SerialConsole::flush()
@@ -101,18 +72,6 @@ void SerialConsole::flush()
     Port.flush();
 }
 
-// trigger tx of serial data
-void SerialConsole::onNowHasData(uint32_t fromRadioNum)
-{
-    setIntervalFromNow(0);
-}
-
-// trigger rx of serial data
-void SerialConsole::rxInt()
-{
-    setIntervalFromNow(0);
-}
-
 // For the serial port we can't really detect if any client is on the other side, so instead just look for recent messages
 bool SerialConsole::checkIsConnected()
 {

src/SerialConsole.h

@@ -32,14 +32,11 @@ class SerialConsole : public StreamAPI, public RedirectablePrint, private concur
     virtual int32_t runOnce() override;
 
     void flush();
-    void rxInt();
 
   protected:
     /// Check the current underlying physical link to see if the client is currently connected
     virtual bool checkIsConnected() override;
 
-    virtual void onNowHasData(uint32_t fromRadioNum) override;
-
     /// Possibly switch to protobufs if we see a valid protobuf message
     virtual void log_to_serial(const char *logLevel, const char *format, va_list arg);
 };

src/buzz/BuzzerFeedbackThread.cpp

@@ -5,7 +5,7 @@
 
 BuzzerFeedbackThread *buzzerFeedbackThread;
 
-BuzzerFeedbackThread::BuzzerFeedbackThread()
+BuzzerFeedbackThread::BuzzerFeedbackThread() : OSThread("BuzzerFeedback")
 {
     if (inputBroker)
         inputObserver.observe(inputBroker);
@@ -15,24 +15,24 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
 {
     // Only provide feedback if buzzer is enabled for notifications
     if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
-        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY ||
-        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY) {
+        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY) {
         return 0; // Let other handlers process the event
     }
 
+    // Track last event time for potential future use
+    lastEventTime = millis();
+    needsUpdate = true;
+
     // Handle different input events with appropriate buzzer feedback
     switch (event->inputEvent) {
     case INPUT_BROKER_USER_PRESS:
     case INPUT_BROKER_ALT_PRESS:
     case INPUT_BROKER_SELECT:
-    case INPUT_BROKER_SELECT_LONG:
         playBeep(); // Confirmation feedback
         break;
 
     case INPUT_BROKER_UP:
-    case INPUT_BROKER_UP_LONG:
     case INPUT_BROKER_DOWN:
-    case INPUT_BROKER_DOWN_LONG:
     case INPUT_BROKER_LEFT:
     case INPUT_BROKER_RIGHT:
         playChirp(); // Navigation feedback
@@ -47,6 +47,10 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
         playComboTune(); // Ping sent feedback
         break;
 
+    case INPUT_BROKER_SHUTDOWN:
+        playShutdownMelody(); // Shutdown feedback
+        break;
+
     default:
         // For other events, check if it's a printable character
         if (event->kbchar >= 32 && event->kbchar <= 126) {
@@ -58,4 +62,18 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
     }
 
     return 0; // Allow other handlers to process the event
-}
+}
+
+int32_t BuzzerFeedbackThread::runOnce()
+{
+    // This thread is primarily event-driven, but we can use runOnce
+    // for any periodic tasks if needed in the future
+
+    if (needsUpdate) {
+        needsUpdate = false;
+        // Could add any periodic processing here
+    }
+
+    // Run every 100ms when active, less frequently when idle
+    return needsUpdate ? 100 : 1000;
+}

src/buzz/BuzzerFeedbackThread.h

@@ -4,7 +4,7 @@
 #include "concurrency/OSThread.h"
 #include "input/InputBroker.h"
 
-class BuzzerFeedbackThread
+class BuzzerFeedbackThread : public concurrency::OSThread
 {
     CallbackObserver<BuzzerFeedbackThread, const InputEvent *> inputObserver =
         CallbackObserver<BuzzerFeedbackThread, const InputEvent *>(this, &BuzzerFeedbackThread::handleInputEvent);
@@ -12,6 +12,13 @@ class BuzzerFeedbackThread
   public:
     BuzzerFeedbackThread();
     int handleInputEvent(const InputEvent *event);
+
+  protected:
+    virtual int32_t runOnce() override;
+
+  private:
+    uint32_t lastEventTime = 0;
+    bool needsUpdate = false;
 };
 
 extern BuzzerFeedbackThread *buzzerFeedbackThread;

src/buzz/buzz.cpp

@@ -140,10 +140,6 @@ bool playNextLeadUpNote()
     playTones(&note, 1); // Play single note using existing playTones function
 
     leadUpNoteIndex++;
-
-    if (leadUpNoteIndex >= leadUpNotesCount) {
-        return false; // this was the final note
-    }
     return true; // Note was played (playTones handles buzzer availability internally)
 }
 

src/concurrency/OSThread.cpp

@@ -86,13 +86,11 @@ void OSThread::run()
 #ifdef DEBUG_HEAP
     auto newHeap = memGet.getFreeHeap();
     if (newHeap < heap)
-        LOG_HEAP("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_DEBUG("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
     if (heap < newHeap)
-        LOG_HEAP("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
-#endif
-#ifdef DEBUG_LOOP_TIMING
-    LOG_DEBUG("====== Thread next run in: %d", newDelay);
+        LOG_DEBUG("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
 #endif
+
     runned();
 
     if (newDelay >= 0)

src/configuration.h

@@ -26,16 +26,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#if __has_include("Melopero_RV3028.h")
+#ifdef RV3028_RTC
 #include "Melopero_RV3028.h"
 #endif
-#if __has_include("pcf8563.h")
+#ifdef PCF8563_RTC
 #include "pcf8563.h"
 #endif
 
-/* Offer chance for variant-specific defines */
-#include "variant.h"
-
 // -----------------------------------------------------------------------------
 // Version
 // -----------------------------------------------------------------------------
@@ -120,17 +117,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SX126X_MAX_POWER 22
 #endif
 
-#ifdef USE_GC1109_PA
-// Power Amps are often non-linear, so we can use an array of values for the power curve
-#define NUM_PA_POINTS 22
-#define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
-#endif
-
-#ifdef RAK13302
-#define NUM_PA_POINTS 22
-#define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
-#endif
-
 // Default system gain to 0 if not defined
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
@@ -149,7 +135,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // OLED & Input
 // -----------------------------------------------------------------------------
-#if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
+#if defined(SEEED_WIO_TRACKER_L1)
 #define SSD1306_ADDRESS 0x3D
 #define USE_SH1106
 #else
@@ -164,12 +150,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// I2C Keyboards (M5Stack, RAK14004, T-Deck, T-Deck Pro, T-Lora Pager, CardKB, BBQ10, MPR121, TCA8418)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
 #define TDECK_KB_ADDR 0x55
 #define BBQ10_KB_ADDR 0x1F
 #define MPR121_KB_ADDR 0x5A
-#define TCA8418_KB_ADDR 0x34
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -208,11 +193,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MLX90614_ADDR_DEF 0x5A
 #define CGRADSENS_ADDR 0x66
 #define LTR390UV_ADDR 0x53
-#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418_KB
+#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418
 #define PCT2075_ADDR 0x37
-#define BQ27220_ADDR 0x55 // same address as TDECK_KB
-#define BQ25896_ADDR 0x6B
-#define LTR553ALS_ADDR 0x23
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
@@ -226,9 +208,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BMX160_ADDR 0x69
 #define ICM20948_ADDR 0x69
 #define ICM20948_ADDR_ALT 0x68
-#define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
-#define DA217_ADDR 0x26
 
 // -----------------------------------------------------------------------------
 // LED
@@ -250,8 +230,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A
-#define CHSC6X_ADDR 0x2E
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -270,18 +248,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // convert 24-bit color to 16-bit (56K)
 #define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
 
+/* Step #1: offer chance for variant-specific defines */
+#include "variant.h"
+
 #if defined(VEXT_ENABLE) && !defined(VEXT_ON_VALUE)
 // Older variant.h files might not be defining this value, so stay with the old default
 #define VEXT_ON_VALUE LOW
 #endif
 
-// -----------------------------------------------------------------------------
-// Rotary encoder
-// -----------------------------------------------------------------------------
-#ifndef ROTARY_DELAY
-#define ROTARY_DELAY 5
-#endif
-
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------

src/detect/ScanI2C.cpp

@@ -25,8 +25,8 @@ ScanI2C::FoundDevice ScanI2C::firstScreen() const
 
 ScanI2C::FoundDevice ScanI2C::firstRTC() const
 {
-    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563, RTC_RX8130CE};
-    return firstOfOrNONE(3, types);
+    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563};
+    return firstOfOrNONE(2, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const

src/detect/ScanI2C.h

@@ -14,7 +14,6 @@ class ScanI2C
         SCREEN_ST7567,
         RTC_RV3028,
         RTC_PCF8563,
-        RTC_RX8130CE,
         CARDKB,
         TDECKKB,
         BBQ10KB,
@@ -75,17 +74,7 @@ class ScanI2C
         RAK12035,
         TCA8418KB,
         PCT2075,
-        CST328,
-        BQ25896,
-        BQ27220,
-        LTR553ALS,
-        BHI260AP,
         BMM150,
-        TSL2561,
-        DRV2605,
-        BH1750,
-        DA217,
-        CHSC6X
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CConsumer.cpp

@@ -1,16 +0,0 @@
-#include "ScanI2CConsumer.h"
-#include <forward_list>
-
-static std::forward_list<ScanI2CConsumer *> ScanI2CConsumers;
-
-ScanI2CConsumer::ScanI2CConsumer()
-{
-    ScanI2CConsumers.push_front(this);
-}
-
-void ScanI2CCompleted(ScanI2C *i2cScanner)
-{
-    for (ScanI2CConsumer *consumer : ScanI2CConsumers) {
-        consumer->i2cScanFinished(i2cScanner);
-    }
-}

src/detect/ScanI2CConsumer.h

@@ -1,13 +0,0 @@
-#pragma once
-
-#include "ScanI2C.h"
-#include <stddef.h>
-
-class ScanI2CConsumer
-{
-  public:
-    ScanI2CConsumer();
-    virtual void i2cScanFinished(ScanI2C *i2cScanner) = 0;
-};
-
-void ScanI2CCompleted(ScanI2C *i2cScanner);

src/detect/ScanI2CTwoWire.cpp

@@ -106,7 +106,6 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
         if (i2cBus->available())
             i2cBus->read();
     }
-    LOG_DEBUG("Register value: 0x%x", value);
     return value;
 }
 
@@ -185,22 +184,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = RTC_RV3028;
                 logFoundDevice("RV3028", (uint8_t)addr.address);
                 rtc.initI2C(*i2cBus);
-                // Update RTC EEPROM settings, if necessary
-                if (rtc.readEEPROMRegister(0x35) != 0x07) {
-                    rtc.writeEEPROMRegister(0x35, 0x07); // no Clkout
-                }
-                if (rtc.readEEPROMRegister(0x37) != 0xB4) {
-                    rtc.writeEEPROMRegister(0x37, 0xB4);
-                }
+                rtc.writeToRegister(0x35, 0x07); // no Clkout
+                rtc.writeToRegister(0x37, 0xB4);
                 break;
 #endif
 
 #ifdef PCF8563_RTC
                 SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563", (uint8_t)addr.address)
 #endif
-#ifdef RX8130CE_RTC
-                SCAN_SIMPLE_CASE(RX8130CE_RTC, RTC_RX8130CE, "RX8130CE", (uint8_t)addr.address)
-#endif
 
             case CARDKB_ADDR:
                 // Do we have the RAK14006 instead?
@@ -215,17 +206,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
 
-            case TDECK_KB_ADDR:
-                // Do we have the T-Deck keyboard or the T-Deck Pro battery sensor?
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
-                if (registerValue != 0) {
-                    logFoundDevice("BQ27220", (uint8_t)addr.address);
-                    type = BQ27220;
-                } else {
-                    logFoundDevice("TDECKKB", (uint8_t)addr.address);
-                    type = TDECKKB;
-                }
-                break;
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address);
 
                 SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address);
@@ -298,7 +279,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = AHT10;
                 break;
 #endif
-#if !defined(M5STACK_UNITC6L)
             case INA_ADDR:
             case INA_ADDR_ALTERNATE:
             case INA_ADDR_WAVESHARE_UPS:
@@ -345,7 +325,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     // else: probably a RAK12500/UBLOX GPS on I2C
                 }
                 break;
-#endif
             case MCP9808_ADDR:
                 // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some
                 // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips.
@@ -378,13 +357,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
-                if (registerValue == 0x5449) {
-                    type = OPT3001;
-                    logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
+                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c || registerValue == 0xc8d) {
                     type = SHT4X;
                     logFoundDevice("SHT4X", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                    type = OPT3001;
+                    logFoundDevice("OPT3001", (uint8_t)addr.address);
                 } else {
                     type = SHT31;
                     logFoundDevice("SHT31", (uint8_t)addr.address);
@@ -417,12 +396,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BQ24295", (uint8_t)addr.address);
                     break;
                 }
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x14), 1); // get ID
-                if ((registerValue & 0b00000011) == 0b00000010) {
-                    type = BQ25896;
-                    logFoundDevice("BQ25896", (uint8_t)addr.address);
-                    break;
-                }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
                 if (registerValue == 0x6A) {
                     type = LSM6DS3;
@@ -465,62 +438,15 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-            case TCA9555_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
-                if (registerValue == 0x13) {
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
-                    if (registerValue == 0x81) {
-                        type = DA217;
-                        logFoundDevice("DA217", (uint8_t)addr.address);
-                    } else {
-                        type = TCA9555;
-                        logFoundDevice("TCA9555", (uint8_t)addr.address);
-                    }
-                } else {
-                    type = TCA9555;
-                    logFoundDevice("TCA9555", (uint8_t)addr.address);
-                }
-                break;
-            case TSL25911_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
-                if (registerValue == 0x50) {
-                    type = TSL2591;
-                    logFoundDevice("TSL25911", (uint8_t)addr.address);
-                } else {
-                    type = TSL2561;
-                    logFoundDevice("TSL2561", (uint8_t)addr.address);
-                }
-                break;
-
+                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
-            case LTR553ALS_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
-                if (registerValue == 0x92) {                                                       // LTR553ALS Part ID
-                    type = LTR553ALS;
-                    logFoundDevice("LTR553ALS", (uint8_t)addr.address);
-                } else {
-                    // Test BH1750 - send power on command
-                    i2cBus->beginTransmission(addr.address);
-                    i2cBus->write(0x01); // Power On command
-                    uint8_t bh1750_error = i2cBus->endTransmission();
-                    if (bh1750_error == 0) {
-                        type = BH1750;
-                        logFoundDevice("BH1750", (uint8_t)addr.address);
-                    } else {
-                        LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address);
-                    }
-                }
-                break;
-
-                SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
 #ifdef HAS_TPS65233
@@ -533,14 +459,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // DRV2605_REG_STATUS
-                    if (registerValue == 0xe0) {
-                        type = DRV2605;
-                        logFoundDevice("DRV2605", (uint8_t)addr.address);
-                    } else {
-                        type = MPR121KB;
-                        logFoundDevice("MPR121KB", (uint8_t)addr.address);
-                    }
+                    type = MPR121KB;
+                    logFoundDevice("MPR121KB", (uint8_t)addr.address);
                 }
                 break;
 
@@ -615,7 +535,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
     scanPort(port, nullptr, 0);
 }
 
-TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address)
+TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
 {
     if (address.port == ScanI2C::I2CPort::WIRE) {
         return &Wire;

src/detect/ScanI2CTwoWire.h

@@ -23,12 +23,12 @@ class ScanI2CTwoWire : public ScanI2C
 
     ScanI2C::FoundDevice find(ScanI2C::DeviceType) const override;
 
+    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
+
     bool exists(ScanI2C::DeviceType) const override;
 
     size_t countDevices() const override;
 
-    static TwoWire *fetchI2CBus(ScanI2C::DeviceAddress);
-
   protected:
     FoundDevice firstOfOrNONE(size_t, DeviceType[]) const override;