Merge branch 'master' into nomad-gemini

.github/workflows/daily_packaging.yml

@@ -30,11 +30,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series:
-          - jammy # 22.04
-          - noble # 24.04
-          - plucky # 25.04
-          - questing # 25.10
+        series: [plucky, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily

.github/workflows/release_channels.yml

@@ -20,11 +20,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series:
-          - jammy # 22.04
-          - noble # 24.04
-          - plucky # 25.04
-          # - questing # 25.10
+        series: [plucky, noble, jammy]
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-

.trunk/trunk.yaml

@@ -9,7 +9,7 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.450
-    - renovate@41.30.5
+    - renovate@41.29.1
     - prettier@3.6.2
     - trufflehog@3.89.2
     - yamllint@1.37.1

arch/stm32/stm32.ini

@@ -23,20 +23,14 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN=1
   -DMESHTASTIC_EXCLUDE_MQTT=1
   -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_GPS=1
   -DMESHTASTIC_EXCLUDE_WIFI=1
   -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
-  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
-  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
   -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
-  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
+  ;-DDEBUG_MUTE
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_LR11X0=1
-  -DHAL_DAC_MODULE_ONLY
-  -DHAL_RNG_MODULE_ENABLED
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>

bin/platformio-custom.py

@@ -3,7 +3,6 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
-import subprocess
 import json
 import re
 
@@ -93,17 +92,6 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
-# get repository owner if git is installed
-try:
-    r_owner = (
-        subprocess.check_output(["git", "config", "--get", "remote.origin.url"])
-        .decode("utf-8")
-        .strip().split("/")
-    )
-    repo_owner = r_owner[-2] + "/" + r_owner[-1].replace(".git", "")
-except subprocess.CalledProcessError:
-    repo_owner = "unknown"
-
 jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
 with open(jsonLoc) as f:
     jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
@@ -129,7 +117,6 @@ flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
-        "-DAPP_REPO=" + repo_owner,
     ] + pref_flags
 
 print ("Using flags:")

platformio.ini

@@ -26,6 +26,7 @@ build_flags = -Wno-missing-field-initializers
 	-DUSE_THREAD_NAMES
 	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
 	-DPB_ENABLE_MALLOC=1
+	-DRADIOLIB_LOW_LEVEL=1
 	-DRADIOLIB_EXCLUDE_CC1101=1
 	-DRADIOLIB_EXCLUDE_NRF24=1
 	-DRADIOLIB_EXCLUDE_RF69=1

src/gps/GPS.cpp

@@ -39,9 +39,9 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-#if defined(GPS_SERIAL_PORT)
-HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
+#if defined(RAK2560)
+HardwareSerial *GPS::_serial_gps = &Serial2;
 #else
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #endif

src/gps/RTC.cpp

@@ -226,14 +226,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     time_t res = gm_mktime(&t);
     struct timeval tv;
     tv.tv_sec = res;
-    tv.tv_usec = 0;                      // time.centisecond() * (10 / 1000);
-    uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-#ifdef BUILD_EPOCH
-    if (tv.tv_sec < BUILD_EPOCH) {
-        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-        return RTCSetResultInvalidTime;
-    }
-#endif
+    tv.tv_usec = 0; // time.centisecond() * (10 / 1000);
 
     // LOG_DEBUG("Got time from GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
     if (t.tm_year < 0 || t.tm_year >= 300) {

src/graphics/Screen.cpp

@@ -386,7 +386,9 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #ifdef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
-
+#ifdef HELTEC_TRACKER_V1_X
+            uint8_t tft_vext_enabled = digitalRead(VEXT_ENABLE);
+#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -398,7 +400,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 
             dispdev->displayOn();
 #ifdef HELTEC_TRACKER_V1_X
-            ui->init();
+            // If the TFT VEXT power is not enabled, initialize the UI.
+            if (!tft_vext_enabled) {
+                ui->init();
+            }
 #endif
 #ifdef USE_ST7789
             pinMode(VTFT_CTRL, OUTPUT);
@@ -864,8 +869,6 @@ void Screen::setFrames(FrameFocus focus)
     uint8_t previousFrameCount = framesetInfo.frameCount;
     FramesetInfo fsi; // Location of specific frames, for applying focus parameter
 
-    graphics::UIRenderer::rebuildFavoritedNodes();
-
     LOG_DEBUG("Show standard frames");
     showingNormalScreen = true;
 
@@ -1376,12 +1379,9 @@ int Screen::handleInputEvent(const InputEvent *event)
                     menuHandler::clockMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.lora) {
                     menuHandler::LoraRegionPicker();
-                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage) {
-                    if (devicestate.rx_text_message.from) {
-                        menuHandler::messageResponseMenu();
-                    } else {
-                        menuHandler::textMessageBaseMenu();
-                    }
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage &&
+                           devicestate.rx_text_message.from) {
+                    menuHandler::messageResponseMenu();
                 } else if (framesetInfo.positions.firstFavorite != 255 &&
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&
                            this->ui->getUiState()->currentFrame <= framesetInfo.positions.lastFavorite) {

src/graphics/SharedUIDisplay.cpp

@@ -206,7 +206,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
         timeX = screenW - xOffset - timeStrWidth + 3;
 
         // === Show Mail or Mute Icon to the Left of Time ===
-        int iconRightEdge = timeX - 2;
+        int iconRightEdge = timeX - 1;
 
         bool showMail = false;
 

src/graphics/draw/ClockRenderer.cpp

@@ -186,7 +186,7 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 {
     display->clear();
     display->setTextAlignment(TEXT_ALIGN_LEFT);
-
+    int line = 1;
     // === Set Title, Blank for Clock
     const char *titleStr = "";
     // === Header ===
@@ -230,8 +230,6 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 
 #ifdef T_WATCH_S3
     float scale = 1.5;
-#elif defined(CHATTER_2)
-    float scale = 1.1;
 #else
     float scale = 0.75;
     if (isHighResolution) {
@@ -287,9 +285,6 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     int yOffset = (isHighResolution) ? 3 : 1;
 #ifdef SENSECAP_INDICATOR
     yOffset -= 3;
-#endif
-#ifdef T_DECK
-    yOffset -= 5;
 #endif
     if (config.display.use_12h_clock) {
         display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,

src/graphics/draw/DebugRenderer.cpp

@@ -483,7 +483,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
 }
 
 // ****************************
-// *      System Screen       *
+// *      Memory Screen       *
 // ****************************
 void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -593,19 +593,7 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     }
     line += 1;
     char appversionstr[35];
-    snprintf(appversionstr, sizeof(appversionstr), "Ver: %s", optstr(APP_VERSION));
-    char appversionstr_formatted[40];
-    char *lastDot = strrchr(appversionstr, '.');
-    if (lastDot) {
-        size_t prefixLen = lastDot - appversionstr;
-        strncpy(appversionstr_formatted, appversionstr, prefixLen);
-        appversionstr_formatted[prefixLen] = '\0';
-        strncat(appversionstr_formatted, " (", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
-        strncat(appversionstr_formatted, lastDot + 1, sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
-        strncat(appversionstr_formatted, ")", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
-        strncpy(appversionstr, appversionstr_formatted, sizeof(appversionstr) - 1);
-        appversionstr[sizeof(appversionstr) - 1] = '\0';
-    }
+    snprintf(appversionstr, sizeof(appversionstr), "Ver.: %s", optstr(APP_VERSION));
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line], appversionstr);

src/graphics/draw/MenuHandler.cpp

@@ -344,37 +344,14 @@ void menuHandler::homeBaseMenu()
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::textMessageBaseMenu()
-{
-    enum optionsNumbers { Back, Preset, Freetext, enumEnd };
-
-    static const char *optionsArray[enumEnd] = {"Back"};
-    static int optionsEnumArray[enumEnd] = {Back};
-    int options = 1;
-    optionsArray[options] = "New Preset Msg";
-    optionsEnumArray[options++] = Preset;
-    if (kb_found) {
-        optionsArray[options] = "New Freetext Msg";
-        optionsEnumArray[options++] = Freetext;
-    }
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Message Action";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Preset) {
-            cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
-        } else if (selected == Freetext) {
-            cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::systemBaseMenu()
 {
+    // Check if brightness is supported
+    bool hasSupportBrightness = false;
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
+    hasSupportBrightness = true;
+#endif
+
     enum optionsNumbers { Back, Notifications, ScreenOptions, PowerMenu, Test, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
@@ -444,11 +421,11 @@ void menuHandler::favoriteBaseMenu()
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Preset) {
+        if (selected == 1) {
             cannedMessageModule->LaunchWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if (selected == Freetext) {
+        } else if (selected == 2 && kb_found) {
             cannedMessageModule->LaunchFreetextWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if (selected == Remove) {
+        } else if ((!kb_found && selected == 2) || (selected == 3 && kb_found)) {
             menuHandler::menuQueue = menuHandler::remove_favorite;
             screen->runNow();
         }
@@ -701,7 +678,6 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
         uint8_t TFT_MESH_r = 0;
         uint8_t TFT_MESH_g = 0;
         uint8_t TFT_MESH_b = 0;
@@ -753,6 +729,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
             screen->runNow();
         }
 
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
         if (selected != 0) {
             display->setColor(BLACK);
             display->fillRect(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
@@ -850,9 +827,8 @@ void menuHandler::removeFavoriteMenu()
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 1) {
-            LOG_INFO("Removing %x as favorite node", graphics::UIRenderer::currentFavoriteNodeNum);
             nodeDB->set_favorite(false, graphics::UIRenderer::currentFavoriteNodeNum);
-            screen->setFrames(graphics::Screen::FOCUS_DEFAULT);
+            screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -948,28 +924,23 @@ void menuHandler::screenOptionsMenu()
 {
     // Check if brightness is supported
     bool hasSupportBrightness = false;
-#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
     hasSupportBrightness = true;
 #endif
 
-#if defined(T_DECK)
-    // TDeck Doesn't seem to support brightness at all, at least not reliably
-    hasSupportBrightness = false;
-#endif
-
     enum optionsNumbers { Back, Brightness, ScreenColor };
     static const char *optionsArray[4] = {"Back"};
     static int optionsEnumArray[4] = {Back};
     int options = 1;
 
     // Only show brightness for B&W displays
-    if (hasSupportBrightness) {
+    if (hasSupportBrightness && !HAS_TFT) {
         optionsArray[options] = "Brightness";
         optionsEnumArray[options++] = Brightness;
     }
 
     // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
     optionsArray[options] = "Screen Color";
     optionsEnumArray[options++] = ScreenColor;
 #endif

src/graphics/draw/MenuHandler.h

@@ -48,7 +48,6 @@ class menuHandler
     static void ClockFacePicker();
     static void messageResponseMenu();
     static void homeBaseMenu();
-    static void textMessageBaseMenu();
     static void systemBaseMenu();
     static void favoriteBaseMenu();
     static void positionBaseMenu();

src/graphics/draw/NotificationRenderer.cpp

@@ -156,7 +156,7 @@ void NotificationRenderer::drawNumberPicker(OLEDDisplay *display, OLEDDisplayUiS
         resetBanner();
         return;
     }
-    if (curSelected == static_cast<int8_t>(numDigits)) {
+    if (curSelected == numDigits) {
         alertBannerCallback(currentNumber);
         resetBanner();
         return;

src/graphics/draw/UIRenderer.cpp

@@ -24,23 +24,6 @@ extern graphics::Screen *screen;
 namespace graphics
 {
 NodeNum UIRenderer::currentFavoriteNodeNum = 0;
-std::vector<meshtastic_NodeInfoLite *> graphics::UIRenderer::favoritedNodes;
-
-void graphics::UIRenderer::rebuildFavoritedNodes()
-{
-    favoritedNodes.clear();
-    size_t total = nodeDB->getNumMeshNodes();
-    for (size_t i = 0; i < total; i++) {
-        meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
-        if (!n || n->num == nodeDB->getNodeNum())
-            continue;
-        if (n->is_favorite)
-            favoritedNodes.push_back(n);
-    }
-
-    std::sort(favoritedNodes.begin(), favoritedNodes.end(),
-              [](const meshtastic_NodeInfoLite *a, const meshtastic_NodeInfoLite *b) { return a->num < b->num; });
-}
 
 #if !MESHTASTIC_EXCLUDE_GPS
 // GeoCoord object for coordinate conversions
@@ -218,7 +201,27 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
 // **********************
 void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
+    // --- Cache favorite nodes for the current frame only, to save computation ---
+    static std::vector<meshtastic_NodeInfoLite *> favoritedNodes;
+    static int prevFrame = -1;
 
+    // --- Only rebuild favorites list if we're on a new frame ---
+    if (state->currentFrame != prevFrame) {
+        prevFrame = state->currentFrame;
+        favoritedNodes.clear();
+        size_t total = nodeDB->getNumMeshNodes();
+        for (size_t i = 0; i < total; i++) {
+            meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
+            // Skip nulls and ourself
+            if (!n || n->num == nodeDB->getNodeNum())
+                continue;
+            if (n->is_favorite)
+                favoritedNodes.push_back(n);
+        }
+        // Keep a stable, consistent display order
+        std::sort(favoritedNodes.begin(), favoritedNodes.end(),
+                  [](const meshtastic_NodeInfoLite *a, const meshtastic_NodeInfoLite *b) { return a->num < b->num; });
+    }
     if (favoritedNodes.empty())
         return;
 
@@ -654,7 +657,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
 
     char combinedName[50];
     snprintf(combinedName, sizeof(combinedName), "%s (%s)", longNameStr.empty() ? "" : longNameStr.c_str(), shortnameble);
-    if (SCREEN_WIDTH - (display->getStringWidth(combinedName)) > 10) {
+    if (SCREEN_WIDTH - (display->getStringWidth(longName) + display->getStringWidth(shortnameble)) > 10) {
         size_t len = strlen(combinedName);
         if (len >= 3 && strcmp(combinedName + len - 3, " ()") == 0) {
             combinedName[len - 3] = '\0'; // Remove the last three characters
@@ -665,7 +668,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
             nameX, ((rows == 4) ? getTextPositions(display)[line++] : getTextPositions(display)[line++]) + yOffset, combinedName);
     } else {
         // === LongName Centered ===
-        textWidth = display->getStringWidth(longNameStr.c_str());
+        textWidth = display->getStringWidth(longName);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line++], longNameStr.c_str());
 

src/graphics/draw/UIRenderer.h

@@ -61,8 +61,6 @@ class UIRenderer
     static void drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
     static NodeNum currentFavoriteNodeNum;
-    static std::vector<meshtastic_NodeInfoLite *> favoritedNodes;
-    static void rebuildFavoritedNodes();
 
 // OEM screens
 #ifdef USERPREFS_OEM_TEXT

src/input/cardKbI2cImpl.cpp

@@ -67,5 +67,4 @@ void CardKbI2cImpl::init()
     }
 #endif
     inputBroker->registerSource(this);
-    kb_found = true;
 }

src/main.cpp

@@ -214,6 +214,8 @@ bool pauseBluetoothLogging = false;
 
 bool pmu_found;
 
+uint8_t pa_fan_percentage = 50;
+
 #if !MESHTASTIC_EXCLUDE_I2C
 // Array map of sensor types with i2c address and wire as we'll find in the i2c scan
 std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1] = {};
@@ -286,7 +288,7 @@ void lateInitVariant() {}
  */
 void printInfo()
 {
-    LOG_INFO("S:B:%d,%s,%s,%s", HW_VENDOR, optstr(APP_VERSION), optstr(APP_ENV), optstr(APP_REPO));
+    LOG_INFO("S:B:%d,%s", HW_VENDOR, optstr(APP_VERSION));
 }
 #ifndef PIO_UNIT_TESTING
 void setup()
@@ -515,11 +517,25 @@ void setup()
     LOG_INFO("Scan for i2c devices");
 #endif
 
-#if defined(I2C_SDA1) || (defined(NRF52840_XXAA) && (WIRE_INTERFACES_COUNT == 2))
+#if defined(I2C_SDA1) && defined(ARCH_RP2040)
+    Wire1.setSDA(I2C_SDA1);
+    Wire1.setSCL(I2C_SCL1);
+    Wire1.begin();
+    i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1);
+#elif defined(I2C_SDA1) && !defined(ARCH_RP2040)
+    Wire1.begin(I2C_SDA1, I2C_SCL1);
+    i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1);
+#elif defined(NRF52840_XXAA) && (WIRE_INTERFACES_COUNT == 2)
     i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1);
 #endif
 
-#if defined(I2C_SDA)
+#if defined(I2C_SDA) && defined(ARCH_RP2040)
+    Wire.setSDA(I2C_SDA);
+    Wire.setSCL(I2C_SCL);
+    Wire.begin();
+    i2cScanner->scanPort(ScanI2C::I2CPort::WIRE);
+#elif defined(I2C_SDA) && !defined(ARCH_RP2040)
+    Wire.begin(I2C_SDA, I2C_SCL);
     i2cScanner->scanPort(ScanI2C::I2CPort::WIRE);
 #elif defined(ARCH_PORTDUINO)
     if (settingsStrings[i2cdev] != "") {
@@ -1361,16 +1377,36 @@ void setup()
     mqttInit();
 #endif
 
-#ifdef RF95_FAN_EN
-    // Ability to disable FAN if PIN has been set with RF95_FAN_EN.
+#ifdef RADIO_FAN_EN
+    // Ability to disable FAN if PIN has been set with RADIO_FAN_EN.
     // Make sure LoRa has been started before disabling FAN.
-    if (config.lora.pa_fan_disabled)
-        digitalWrite(RF95_FAN_EN, LOW ^ 0);
+#ifdef RADIO_FAN_PWM
+#if defined(ARCH_ESP32)
+    // Set up PWM at Channel 1 at 25KHz, using 8-bit resolution
+    // Turn ON/OFF fan to the specified value if enabled by config.
+    // code by https://github.com/gjelsoe/
+    if (ledcSetup(1, 25000, 8)) {
+        ledcAttachPin(RADIO_FAN_EN, 1);
+        LOG_INFO("PWM init C1 P%d\n", RADIO_FAN_EN);
+        // Set PWM duty cycle based on fan disabled state
+        ledcWrite(1, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+    } else {
+        LOG_WARN("PWM init fail P%d\n", RADIO_FAN_EN);
+    }
+#elif defined(ARCH_NRF52)
+    pinMode(RADIO_FAN_EN, OUTPUT);
+    analogWrite(RADIO_FAN_EN, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#endif
+#else
+    // Set up as ON/OFF switch of fan
+    pinMode(RADIO_FAN_EN, OUTPUT);
+    digitalWrite(RADIO_FAN_EN, LOW ^ 0);
+#endif
 #endif
 
 #ifndef ARCH_PORTDUINO
 
-        // Initialize Wifi
+    // Initialize Wifi
 #if HAS_WIFI
     initWifi();
 #endif

src/main.h

@@ -78,6 +78,8 @@ extern uint32_t shutdownAtMsec;
 
 extern uint32_t serialSinceMsec;
 
+extern uint8_t pa_fan_percentage;
+
 // If a thread does something that might need for it to be rescheduled ASAP it can set this flag
 // This will suppress the current delay and instead try to run ASAP.
 extern bool runASAP;

src/memGet.cpp

@@ -10,10 +10,6 @@
 #include "memGet.h"
 #include "configuration.h"
 
-#ifdef ARCH_STM32WL
-#include <malloc.h>
-#endif
-
 MemGet memGet;
 
 /**
@@ -28,9 +24,6 @@ uint32_t MemGet::getFreeHeap()
     return dbgHeapFree();
 #elif defined(ARCH_RP2040)
     return rp2040.getFreeHeap();
-#elif defined(ARCH_STM32WL)
-    struct mallinfo m = mallinfo();
-    return m.fordblks; // Total free space (bytes)
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;
@@ -49,9 +42,6 @@ uint32_t MemGet::getHeapSize()
     return dbgHeapTotal();
 #elif defined(ARCH_RP2040)
     return rp2040.getTotalHeap();
-#elif defined(ARCH_STM32WL)
-    struct mallinfo m = mallinfo();
-    return m.arena; // Non-mmapped space allocated (bytes)
 #else
     // this platform does not have heap management function implemented
     return UINT32_MAX;

src/mesh/LR11x0Interface.cpp

@@ -3,6 +3,7 @@
 #include "Throttle.h"
 #include "configuration.h"
 #include "error.h"
+#include "main.h"
 #include "mesh/NodeDB.h"
 #ifdef LR11X0_DIO_AS_RF_SWITCH
 #include "rfswitch.h"
@@ -54,6 +55,8 @@ template <typename T> bool LR11x0Interface<T>::init()
     digitalWrite(LR11X0_POWER_EN, HIGH);
 #endif
 
+    enableFan();
+
 #if ARCH_PORTDUINO
     float tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
 // FIXME: correct logic to default to not using TCXO if no voltage is specified for LR11x0_DIO3_TCXO_VOLTAGE

src/mesh/RF95Interface.cpp

@@ -154,10 +154,7 @@ bool RF95Interface::init()
     digitalWrite(RF95_TXEN, 0);
 #endif
 
-#ifdef RF95_FAN_EN
-    pinMode(RF95_FAN_EN, OUTPUT);
-    digitalWrite(RF95_FAN_EN, 1);
-#endif
+    enableFan();
 
 #ifdef RF95_RXEN
     pinMode(RF95_RXEN, OUTPUT);
@@ -330,10 +327,7 @@ bool RF95Interface::sleep()
     // put chipset into sleep mode
     setStandby(); // First cancel any active receiving/sending
     lora->sleep();
-
-#ifdef RF95_FAN_EN
-    digitalWrite(RF95_FAN_EN, 0);
-#endif
+    disableFan();
 
     return true;
 }

src/mesh/RadioLibInterface.cpp

@@ -531,4 +531,37 @@ bool RadioLibInterface::startSend(meshtastic_MeshPacket *txp)
 
         return res == RADIOLIB_ERR_NONE;
     }
+}
+
+void RadioLibInterface::enableFan()
+{
+#ifdef RADIO_FAN_EN
+
+#ifdef RADIO_FAN_PWM
+#if defined(ARCH_ESP32)
+    ledcWrite(1, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#elif defined(ARCH_NRF52)
+    analogWrite(RADIO_FAN_EN, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#endif
+#else
+    pinMode(RADIO_FAN_EN, OUTPUT);
+    digitalWrite(RADIO_FAN_EN, 1);
+#endif
+#endif
+}
+
+void RadioLibInterface::disableFan()
+{
+#ifdef RADIO_FAN_EN
+#ifdef RADIO_FAN_PWM
+#if defined(ARCH_ESP32)
+    ledcWrite(1, 0);
+#elif defined(ARCH_NRF52)
+    analogWrite(RADIO_FAN_EN, 0);
+#endif
+#else
+    pinMode(RADIO_FAN_EN, OUTPUT);
+    digitalWrite(RADIO_FAN_EN, 0);
+#endif
+#endif
 }

src/mesh/RadioLibInterface.h

@@ -146,6 +146,9 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified
     /** Attempt to find a packet in the TxQueue. Returns true if the packet was found. */
     virtual bool findInTxQueue(NodeNum from, PacketId id) override;
 
+    void enableFan();
+    void disableFan();
+
   private:
     /** if we have something waiting to send, start a short (random) timer so we can come check for collision before actually
      * doing the transmit */

src/mesh/SX126xInterface.cpp

@@ -52,6 +52,8 @@ template <typename T> bool SX126xInterface<T>::init()
     pinMode(SX126X_POWER_EN, OUTPUT);
 #endif
 
+    enableFan();
+
 #if ARCH_PORTDUINO
     tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
     if (settingsMap[sx126x_ant_sw_pin] != RADIOLIB_NC) {

src/mesh/SX128xInterface.cpp

@@ -35,10 +35,7 @@ template <typename T> bool SX128xInterface<T>::init()
     digitalWrite(SX128X_POWER_EN, HIGH);
 #endif
 
-#ifdef RF95_FAN_EN
-    pinMode(RF95_FAN_EN, OUTPUT);
-    digitalWrite(RF95_FAN_EN, 1);
-#endif
+    enableFan();
 
 #if ARCH_PORTDUINO
     if (settingsMap[rxen_pin] != RADIOLIB_NC) {

src/mesh/generated/meshtastic/admin.pb.h

@@ -7,9 +7,9 @@
 #include "meshtastic/channel.pb.h"
 #include "meshtastic/config.pb.h"
 #include "meshtastic/connection_status.pb.h"
-#include "meshtastic/device_ui.pb.h"
 #include "meshtastic/mesh.pb.h"
 #include "meshtastic/module_config.pb.h"
+#include "meshtastic/device_ui.pb.h"
 
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.

src/mesh/generated/meshtastic/config.pb.h

@@ -102,11 +102,7 @@ typedef enum _meshtastic_Config_DeviceConfig_BuzzerMode {
     meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY = 2,
     /* Non-notification system buzzer tones only.
  Buzzer is enabled only for non-notification tones such as button presses, startup, shutdown, but not for alerts. */
-    meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY = 3,
-    /* Direct Message notifications only.
- Buzzer is enabled only for direct messages and alerts, but not for button presses.
- External notification config determines the specifics of the notification behavior. */
-    meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY = 4
+    meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY = 3
 } meshtastic_Config_DeviceConfig_BuzzerMode;
 
 /* Bit field of boolean configuration options, indicating which optional
@@ -649,8 +645,8 @@ extern "C" {
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_RebroadcastMode)(meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY+1))
 
 #define _meshtastic_Config_DeviceConfig_BuzzerMode_MIN meshtastic_Config_DeviceConfig_BuzzerMode_ALL_ENABLED
-#define _meshtastic_Config_DeviceConfig_BuzzerMode_MAX meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY
-#define _meshtastic_Config_DeviceConfig_BuzzerMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_BuzzerMode)(meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY+1))
+#define _meshtastic_Config_DeviceConfig_BuzzerMode_MAX meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY
+#define _meshtastic_Config_DeviceConfig_BuzzerMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_BuzzerMode)(meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY+1))
 
 #define _meshtastic_Config_PositionConfig_PositionFlags_MIN meshtastic_Config_PositionConfig_PositionFlags_UNSET
 #define _meshtastic_Config_PositionConfig_PositionFlags_MAX meshtastic_Config_PositionConfig_PositionFlags_SPEED

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -6,10 +6,10 @@
 #include <pb.h>
 #include <vector>
 #include "meshtastic/channel.pb.h"
-#include "meshtastic/config.pb.h"
-#include "meshtastic/localonly.pb.h"
 #include "meshtastic/mesh.pb.h"
 #include "meshtastic/telemetry.pb.h"
+#include "meshtastic/config.pb.h"
+#include "meshtastic/localonly.pb.h"
 
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.

src/mesh/generated/meshtastic/mesh.pb.h

@@ -6,11 +6,11 @@
 #include <pb.h>
 #include "meshtastic/channel.pb.h"
 #include "meshtastic/config.pb.h"
-#include "meshtastic/device_ui.pb.h"
 #include "meshtastic/module_config.pb.h"
 #include "meshtastic/portnums.pb.h"
 #include "meshtastic/telemetry.pb.h"
 #include "meshtastic/xmodem.pb.h"
+#include "meshtastic/device_ui.pb.h"
 
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.
@@ -247,26 +247,32 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO = 96,
     /* Elecrow CrowPanel Advance models, ESP32-S3 and TFT with SX1262 radio plugin */
     meshtastic_HardwareModel_CROWPANEL = 97,
-    /* Lilygo LINK32 board with sensors */
+    /* *
+ Lilygo LINK32 board with sensors */
     meshtastic_HardwareModel_LINK_32 = 98,
-    /* Seeed Tracker L1 */
+    /* *
+ Seeed Tracker L1 */
     meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1 = 99,
-    /* Seeed Tracker L1 EINK driver */
+    /* *
+ Seeed Tracker L1 EINK driver */
     meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1_EINK = 100,
     /* Reserved ID for future and past use */
     meshtastic_HardwareModel_QWANTZ_TINY_ARMS = 101,
-    /* Lilygo T-Deck Pro */
+    /* *
+ Lilygo T-Deck Pro */
     meshtastic_HardwareModel_T_DECK_PRO = 102,
-    /* Lilygo TLora Pager */
+    /* *
+ Lilygo TLora Pager */
     meshtastic_HardwareModel_T_LORA_PAGER = 103,
-    /* GAT562 Mesh Trial Tracker */
+    /* *
+ GAT562 Mesh Trial Tracker */
     meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER = 104,
-    /* RAKwireless WisMesh Tag */
+    /* *
+ RAKwireless WisMesh Tag */
     meshtastic_HardwareModel_WISMESH_TAG = 105,
-    /* RAKwireless WisBlock Core RAK3312 https://docs.rakwireless.com/product-categories/wisduo/rak3112-module/overview/ */
+    /* *
+ RAKwireless WisBlock Core RAK3312 https://docs.rakwireless.com/product-categories/wisduo/rak3112-module/overview/ */
     meshtastic_HardwareModel_RAK3312 = 106,
-    /* Elecrow ThinkNode M5 https://www.elecrow.com/wiki/ThinkNode_M5_Meshtastic_LoRa_Signal_Transceiver_ESP32-S3.html */
-    meshtastic_HardwareModel_THINKNODE_M5 = 107,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */

src/mesh/generated/meshtastic/powermon.pb.h

@@ -11,7 +11,7 @@
 
 /* Enum definitions */
 /* Any significant power changing event in meshtastic should be tagged with a powermon state transition.
- If you are making new meshtastic features feel free to add new entries at the end of this definition. */
+If you are making new meshtastic features feel free to add new entries at the end of this definition. */
 typedef enum _meshtastic_PowerMon_State {
     meshtastic_PowerMon_State_None = 0,
     meshtastic_PowerMon_State_CPU_DeepSleep = 1,
@@ -34,13 +34,13 @@ something like "S:PM:C,0x00001234,REASON" where the hex number is the bitmask of
     meshtastic_PowerMon_State_Screen_Drawing = 512,
     meshtastic_PowerMon_State_Wifi_On = 1024,
     /* GPS is actively trying to find our location
- See GPSPowerState for more details */
+See GPSPowerState for more details */
     meshtastic_PowerMon_State_GPS_Active = 2048
 } meshtastic_PowerMon_State;
 
 /* What operation would we like the UUT to perform.
- note: senders should probably set want_response in their request packets, so that they can know when the state
- machine has started processing their request */
+note: senders should probably set want_response in their request packets, so that they can know when the state
+machine has started processing their request */
 typedef enum _meshtastic_PowerStressMessage_Opcode {
     /* Unset/unused */
     meshtastic_PowerStressMessage_Opcode_UNSET = 0,
@@ -67,7 +67,7 @@ typedef enum _meshtastic_PowerStressMessage_Opcode {
 
 /* Struct definitions */
 /* Note: There are no 'PowerMon' messages normally in use (PowerMons are sent only as structured logs - slogs).
- But we wrap our State enum in this message to effectively nest a namespace (without our linter yelling at us) */
+But we wrap our State enum in this message to effectively nest a namespace (without our linter yelling at us) */
 typedef struct _meshtastic_PowerMon {
     char dummy_field;
 } meshtastic_PowerMon;

src/modules/AdminModule.cpp

@@ -706,13 +706,21 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             requiresReboot = false;
         }
 
-#ifdef RF95_FAN_EN
+#ifdef RADIO_FAN_EN
+#ifdef RADIO_FAN_PWM
+#if defined(ARCH_ESP32)
+        ledcWrite(1, c.payload_variant.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#elif defined(ARCH_NFR52)
+        analogWrite(RADIO_FAN_EN, c.payload_variant.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#endif
+#else
         // Turn PA off if disabled by config
         if (c.payload_variant.lora.pa_fan_disabled) {
-            digitalWrite(RF95_FAN_EN, LOW ^ 0);
+            digitalWrite(RADIO_FAN_EN, LOW ^ 0);
         } else {
-            digitalWrite(RF95_FAN_EN, HIGH ^ 0);
+            digitalWrite(RADIO_FAN_EN, HIGH ^ 0);
         }
+#endif
 #endif
         config.lora = c.payload_variant.lora;
         // If we're setting region for the first time, init the region

src/modules/CannedMessageModule.cpp

@@ -850,13 +850,7 @@ void CannedMessageModule::sendText(NodeNum dest, ChannelIndex channel, const cha
     this->waitingForAck = true;
 
     // Log outgoing message
-    LOG_INFO("Send message id=%u, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
-
-    if (p->to != 0xffffffff) {
-        LOG_INFO("Proactively adding %x as favorite node", p->to);
-        nodeDB->set_favorite(true, p->to);
-        screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
-    }
+    LOG_INFO("Send message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
 
     // Send to mesh and phone (even if no phone connected, to track ACKs)
     service->sendToMesh(p, RX_SRC_LOCAL, true);

src/modules/NodeInfoModule.cpp

@@ -14,11 +14,6 @@ bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
 {
     auto p = *pptr;
 
-    if (p.is_licensed != owner.is_licensed) {
-        LOG_WARN("Invalid nodeInfo detected, is_licensed mismatch!");
-        return true;
-    }
-
     // Coerce user.id to be derived from the node number
     snprintf(p.id, sizeof(p.id), "!%08x", getFrom(&mp));
 

src/modules/PositionModule.cpp

@@ -266,11 +266,9 @@ meshtastic_MeshPacket *PositionModule::allocPositionPacket()
 
     LOG_INFO("Position packet: time=%i lat=%i lon=%i", p.time, p.latitude_i, p.longitude_i);
 
-#ifndef MESHTASTIC_EXCLUDE_ATAK
     // TAK Tracker devices should send their position in a TAK packet over the ATAK port
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER)
         return allocAtakPli();
-#endif
 
     return allocDataProtobuf(p);
 }

src/mqtt/MQTT.cpp

@@ -559,8 +559,10 @@ void MQTT::sendSubscriptions()
 
 int32_t MQTT::runOnce()
 {
+#if HAS_NETWORKING
     if (!moduleConfig.mqtt.enabled || !(moduleConfig.mqtt.map_reporting_enabled || channels.anyMqttEnabled()))
         return disable();
+
     bool wantConnection = wantsLink();
 
     perhapsReportToMap();
@@ -570,7 +572,7 @@ int32_t MQTT::runOnce()
         publishQueuedMessages();
         return 200;
     }
-#if HAS_NETWORKING
+
     else if (!pubSub.loop()) {
         if (!wantConnection)
             return 5000; // If we don't want connection now, check again in 5 secs
@@ -594,10 +596,8 @@ int32_t MQTT::runOnce()
         powerFSM.trigger(EVENT_CONTACT_FROM_PHONE); // Suppress entering light sleep (because that would turn off bluetooth)
         return 20;
     }
-#else
-    // No networking available, return default interval
-    return 30000;
 #endif
+    return 30000;
 }
 
 bool MQTT::isValidConfig(const meshtastic_ModuleConfig_MQTTConfig &config, MQTTClient *client)

src/platform/nrf52/architecture.h

@@ -49,8 +49,6 @@
 #define HW_VENDOR meshtastic_HardwareModel_RAK2560
 #elif defined(WISMESH_TAP)
 #define HW_VENDOR meshtastic_HardwareModel_WISMESH_TAP
-#elif defined(WISMESH_TAG)
-#define HW_VENDOR meshtastic_HardwareModel_WISMESH_TAG
 #elif defined(GAT562_MESH_TRIAL_TRACKER)
 #define HW_VENDOR meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER
 #elif defined(RAK4630)
@@ -91,8 +89,6 @@
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_POCKET
 #elif defined(NOMADSTAR_METEOR_PRO)
 #define HW_VENDOR meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO
-#elif defined(SEEED_WIO_TRACKER_L1_EINK)
-#define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1_EINK
 #elif defined(SEEED_WIO_TRACKER_L1)
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1
 #else

variants/CDEBYTE_E77-MBL/platformio.ini

@@ -9,9 +9,19 @@ build_flags =
   -DSERIAL_UART_INSTANCE=1
   -DPIN_SERIAL_RX=PA3
   -DPIN_SERIAL_TX=PA2
+  -DHAL_DAC_MODULE_ONLY
+  -DHAL_RNG_MODULE_ENABLED
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
   -DMESHTASTIC_EXCLUDE_I2C=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
   -DMESHTASTIC_EXCLUDE_GPS=1
+  -DMESHTASTIC_EXCLUDE_SCREEN=1
+  -DMESHTASTIC_EXCLUDE_MQTT=1
+  -DMESHTASTIC_EXCLUDE_POWERMON=1
   ;-DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF
   ;-DCFG_DEBUG
 

variants/betafpv_2400_tx_micro/variant.h

@@ -12,7 +12,7 @@
 #define LORA_MISO 19
 #define LORA_MOSI 23
 #define LORA_CS 5
-#define RF95_FAN_EN 17
+#define RADIO_FAN_EN 17
 
 // #define LED_PIN 16 // This is a LED_WS2812 not a standard LED
 #define HAS_NEOPIXEL                         // Enable the use of neopixels

variants/radiomaster_900_bandit/variant.h

@@ -46,7 +46,8 @@
   FAN is active at 250mW on it's ExpressLRS Firmware.
   This FAN has TACHO signal on Pin 27 for use with PWM.
 */
-#define RF95_FAN_EN 2
+#define RADIO_FAN_EN 2
+#define RADIO_FAN_PWM
 
 /*
   LED PIN setup and it has a NeoPixel LED.

variants/radiomaster_900_bandit_nano/variant.h

@@ -32,7 +32,7 @@
   This unit has a FAN built-in.
   FAN is active at 250mW on it's ExpressLRS Firmware.
 */
-#define RF95_FAN_EN 2
+#define RADIO_FAN_EN 2
 
 /*
   LED PIN setup.

variants/radiomaster_nomad_gemini/platformio.ini

@@ -0,0 +1,20 @@
+[env:radiomaster_nomad_gemini]
+extends = esp32_base
+board = esp32doit-devkit-v1
+build_flags =
+  ${esp32_base.build_flags}
+  -DRADIOMASTER_NOMAD_GEMINI
+  -DPRIVATE_HW
+  -DVTABLES_IN_FLASH=1
+  -DCONFIG_DISABLE_HAL_LOCKS=1
+  -O2
+  -Ivariants/radiomaster_nomad_gemini
+  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
+  -DMESHTASTIC_EXCLUDE_I2C=1
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_SX126X=1
+board_build.f_cpu = 240000000L
+upload_protocol = esptool
+lib_deps =
+  ${esp32_base.lib_deps}

variants/radiomaster_nomad_gemini/rfswitch.h

@@ -0,0 +1,56 @@
+#include "RadioLib.h"
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7,
+                                             RADIOLIB_LR11X0_DIO8, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode                  DIO5  DIO6 DIO7 DIO8
+    {LR11x0::MODE_STBY, {LOW, LOW, LOW, LOW}},   {LR11x0::MODE_RX, {LOW, LOW, HIGH, LOW}},
+    {LR11x0::MODE_TX, {LOW, LOW, LOW, HIGH}},    {LR11x0::MODE_TX_HP, {LOW, LOW, LOW, HIGH}},
+    {LR11x0::MODE_TX_HF, {LOW, HIGH, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, LOW, LOW}},
+    {LR11x0::MODE_WIFI, {HIGH, LOW, LOW, LOW}},  END_OF_MODE_TABLE,
+};
+
+/*
+
+DIO5: RXEN 2.4GHz
+DIO6: TXEN 2.4GHz
+DIO7: RXEN 900MHz
+DIO8: TXEN 900MHz
+
+
+  "radio_dcdc": true,
+  "radio_rfo_hf": true,
+
+    "power_apc2": 26,
+    "power_min": 0,
+    "power_high": 6,
+    "power_max": 6,
+    "power_default": 3,
+    "power_control": 3, POWER_OUTPUT_DACWRITE // use internal dacWrite function to set value on GPIO_PIN_RFamp_APC2
+                         [0,   1,   2,   3,   4,   5,   6 ] // 0-6
+    "power_values":      [120, 120, 120, 120, 120, 120, 95] // DAC Value
+    "power_values2":     [-17, -16, -14, -11, -7,  -3,  5 ] // 900M
+    "power_values_dual": [-18, -14,  -8,  -6, -2,   3,  5 ] // 2.4G
+
+    // default value 0 means direct!
+#define POWER_OUTPUT_DACWRITE (hardware_int(HARDWARE_power_control)==3)
+#define POWER_OUTPUT_VALUES hardware_i16_array(HARDWARE_power_values)
+#define POWER_OUTPUT_VALUES_COUNT hardware_int(HARDWARE_power_values_count)
+#define POWER_OUTPUT_VALUES2 hardware_i16_array(HARDWARE_power_values2)
+#define POWER_OUTPUT_VALUES_DUAL hardware_i16_array(HARDWARE_power_values_dual)
+#define POWER_OUTPUT_VALUES_DUAL_COUNT hardware_int(HARDWARE_power_values_dual_count)
+
+#define GPIO_PIN_FAN_EN hardware_pin(HARDWARE_misc_fan_en)
+
+    case PWR_10mW: return 10;
+    case PWR_25mW: return 14;
+    case PWR_50mW: return 17;
+    case PWR_100mW: return 20;
+    case PWR_250mW: return 24;
+    case PWR_500mW: return 27;
+    case PWR_1000mW: return 30;
+
+    95 -> +25dBm
+    120 -> +24dBm
+*/

variants/radiomaster_nomad_gemini/variant.h

@@ -0,0 +1,60 @@
+#define HAS_SCREEN 0
+#define HAS_WIRE 0
+#define HAS_GPS 0
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+
+#define PIN_SPI_MISO 33
+#define PIN_SPI_MOSI 32
+#define PIN_SPI_SCK 25
+#define PIN_SPI_NSS 27
+
+#define LORA_RESET 15
+#define LORA_DIO1 37
+#define LORA_DIO2 36
+#define LORA_SCK PIN_SPI_SCK
+#define LORA_MISO PIN_SPI_MISO
+#define LORA_MOSI PIN_SPI_MOSI
+#define LORA_CS PIN_SPI_NSS
+
+// supported modules list
+#define USE_LR1121
+
+#define LR1121_IRQ_PIN LORA_DIO1
+#define LR1121_NRESET_PIN LORA_RESET
+#define LR1121_BUSY_PIN LORA_DIO2
+#define LR1121_SPI_NSS_PIN LORA_CS
+#define LR1121_SPI_SCK_PIN LORA_SCK
+#define LR1121_SPI_MOSI_PIN LORA_MOSI
+#define LR1121_SPI_MISO_PIN LORA_MISO
+
+// this is correct and sets the cap for the Sub-GHz part
+#define LR1110_MAX_POWER 5
+// 2.4G Part
+#define LR1120_MAX_POWER 5
+
+#define POWER_SHIFT -20
+
+// not yet implemented
+#define JANUS_RADIO
+#define LR1121_IRQ2_PIN 34
+#define LR1121_NRESET2_PIN 21
+#define LR1121_BUSY2_PIN 39
+#define LR1121_SPI_NSS2_PIN 13
+
+// TODO: check if this is correct
+// #define LR11X0_DIO3_TCXO_VOLTAGE 1.6
+#define LR11X0_DIO_AS_RF_SWITCH
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 2                     // How many neopixels are connected
+#define NEOPIXEL_DATA 22                     // GPIO pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // Type of neopixels in use
+#define ENABLE_AMBIENTLIGHTING               // Turn on Ambient Lighting
+
+#define BUTTON_PIN 34
+#define BUTTON_NEED_PULLUP
+
+#undef EXT_NOTIFY_OUT
+
+#define RADIO_FAN_EN 2

variants/rak2560/variant.h

@@ -222,7 +222,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 // #define PIN_GPS_EN PIN_3V3_EN
 #define PIN_GPS_PPS (17) // Pulse per second input from the GPS
 
-#define GPS_SERIAL_PORT Serial2
 // On RAK2560 the GPS is be on a different UART
 // #define GPS_RX_PIN PIN_SERIAL2_RX
 // #define GPS_TX_PIN PIN_SERIAL2_TX

variants/rak3172/platformio.ini

@@ -7,8 +7,18 @@ build_flags =
   -Ivariants/rak3172
   -DPIN_WIRE_SDA=PA11
   -DPIN_WIRE_SCL=PA12
+  -DHAL_DAC_MODULE_ONLY
+  -DHAL_RNG_MODULE_ENABLED
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
   -DMESHTASTIC_EXCLUDE_I2C=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
   -DMESHTASTIC_EXCLUDE_GPS=1
+  -DMESHTASTIC_EXCLUDE_SCREEN=1
+  -DMESHTASTIC_EXCLUDE_MQTT=1
+  -DMESHTASTIC_EXCLUDE_POWERMON=1
   ;-DCFG_DEBUG
 upload_port = stlink

variants/rak_wismeshtag/platformio.ini

@@ -1,15 +0,0 @@
-; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
-[env:rak_wismeshtag]
-extends = nrf52840_base
-board = wiscore_rak4631
-board_check = true
-build_flags = ${nrf52840_base.build_flags} -Ivariants/rak_wismeshtag -D WISMESH_TAG -D RAK_4631
-  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_LR11X0=1
-  -DMESHTASTIC_EXCLUDE_WIFI=1
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak_wismeshtag>
-lib_deps = 
-  ${nrf52840_base.lib_deps}

variants/rak_wismeshtag/variant.cpp

@@ -1,45 +0,0 @@
-/*
-  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
-  Copyright (c) 2016 Sandeep Mistry All right reserved.
-  Copyright (c) 2018, Adafruit Industries (adafruit.com)
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  See the GNU Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-#include "variant.h"
-#include "nrf.h"
-#include "wiring_constants.h"
-#include "wiring_digital.h"
-
-const uint32_t g_ADigitalPinMap[] = {
-    // P0
-    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-
-    // P1
-    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
-
-void initVariant()
-{
-    // LED1 & LED2
-    pinMode(PIN_LED1, OUTPUT);
-    ledOff(PIN_LED1);
-
-    pinMode(PIN_LED2, OUTPUT);
-    ledOff(PIN_LED2);
-
-    // 3V3 Power Rail
-    pinMode(PIN_3V3_EN, OUTPUT);
-    digitalWrite(PIN_3V3_EN, HIGH);
-}

variants/rak_wismeshtag/variant.h

@@ -1,245 +0,0 @@
-/*
-  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
-  Copyright (c) 2016 Sandeep Mistry All right reserved.
-  Copyright (c) 2018, Adafruit Industries (adafruit.com)
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  See the GNU Lesser General Public License for more details.
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-#ifndef _VARIANT_RAK4630_
-#define _VARIANT_RAK4630_
-
-#define RAK4630
-
-/** Master clock frequency */
-#define VARIANT_MCK (64000000ul)
-
-#define USE_LFXO // Board uses 32khz crystal for LF
-// define USE_LFRC    // Board uses RC for LF
-
-/*----------------------------------------------------------------------------
- *        Headers
- *----------------------------------------------------------------------------*/
-
-#include "WVariant.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif // __cplusplus
-
-// Number of pins defined in PinDescription array
-#define PINS_COUNT (48)
-#define NUM_DIGITAL_PINS (48)
-#define NUM_ANALOG_INPUTS (6)
-#define NUM_ANALOG_OUTPUTS (0)
-
-// LEDs
-#define PIN_LED1 (35)
-#define PIN_LED2 (36)
-
-#define LED_BUILTIN PIN_LED1
-#define LED_CONN PIN_LED2
-
-#define LED_GREEN PIN_LED1
-#define LED_BLUE PIN_LED2
-
-#define LED_STATE_ON 1 // State when LED is litted
-
-/*
- * Buttons
- */
-
-#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
-#define BUTTON_NEED_PULLUP
-#define PIN_BUTTON2 12
-#define PIN_BUTTON3 24
-#define PIN_BUTTON4 25
-
-/*
- * Analog pins
- */
-#define PIN_A0 (5)
-#define PIN_A1 (31)
-#define PIN_A2 (28)
-#define PIN_A3 (29)
-#define PIN_A4 (30)
-#define PIN_A5 (31)
-#define PIN_A6 (0xff)
-#define PIN_A7 (0xff)
-
-static const uint8_t A0 = PIN_A0;
-static const uint8_t A1 = PIN_A1;
-static const uint8_t A2 = PIN_A2;
-static const uint8_t A3 = PIN_A3;
-static const uint8_t A4 = PIN_A4;
-static const uint8_t A5 = PIN_A5;
-static const uint8_t A6 = PIN_A6;
-static const uint8_t A7 = PIN_A7;
-#define ADC_RESOLUTION 14
-
-// Other pins
-#define PIN_AREF (2)
-#define PIN_NFC1 (9)
-#define PIN_NFC2 (10)
-
-static const uint8_t AREF = PIN_AREF;
-
-/*
- * Serial interfaces
- */
-#define PIN_SERIAL1_RX (15)
-#define PIN_SERIAL1_TX (16)
-
-// Connected to Jlink CDC
-#define PIN_SERIAL2_RX (8)
-#define PIN_SERIAL2_TX (6)
-
-/*
- * SPI Interfaces
- */
-#define SPI_INTERFACES_COUNT 2
-
-#define PIN_SPI_MISO (45)
-#define PIN_SPI_MOSI (44)
-#define PIN_SPI_SCK (43)
-
-#define PIN_SPI1_MISO (29) // (0 + 29)
-#define PIN_SPI1_MOSI (30) // (0 + 30)
-#define PIN_SPI1_SCK (3)   // (0 + 3)
-
-static const uint8_t SS = 42;
-static const uint8_t MOSI = PIN_SPI_MOSI;
-static const uint8_t MISO = PIN_SPI_MISO;
-static const uint8_t SCK = PIN_SPI_SCK;
-
-/*
- * eink display pins
- */
-
-#define PIN_EINK_CS (0 + 26)
-#define PIN_EINK_BUSY (0 + 4)
-#define PIN_EINK_DC (0 + 17)
-#define PIN_EINK_RES (-1)
-#define PIN_EINK_SCLK (0 + 3)
-#define PIN_EINK_MOSI (0 + 30) // also called SDI
-
-/*
- * Wire Interfaces
- */
-#define WIRE_INTERFACES_COUNT 1
-
-// RAK WISMESHTAG
-#define PIN_WIRE_SDA (25)
-#define PIN_WIRE_SCL (24)
-
-// QSPI Pins
-#define PIN_QSPI_SCK 3
-#define PIN_QSPI_CS 26
-#define PIN_QSPI_IO0 30
-#define PIN_QSPI_IO1 29
-#define PIN_QSPI_IO2 28
-#define PIN_QSPI_IO3 2
-
-
-/* @note RAK5005-O GPIO mapping to RAK4631 GPIO ports
-   RAK5005-O <->  nRF52840
-   IO1       <->  P0.17 (Arduino GPIO number 17)
-   IO2       <->  P1.02 (Arduino GPIO number 34)
-   IO3       <->  P0.21 (Arduino GPIO number 21)
-   IO4       <->  P0.04 (Arduino GPIO number 4)
-   IO5       <->  P0.09 (Arduino GPIO number 9)
-   IO6       <->  P0.10 (Arduino GPIO number 10)
-   IO7       <->  P0.28 (Arduino GPIO number 28)
-   SW1       <->  P0.01 (Arduino GPIO number 1)
-   A0        <->  P0.04/AIN2 (Arduino Analog A2
-   A1        <->  P0.31/AIN7 (Arduino Analog A7
-   SPI_CS    <->  P0.26 (Arduino GPIO number 26)
- */
-
-// RAK4630 LoRa module
-
-/* Setup of the SX1262 LoRa module ( https://docs.rakwireless.com/Product-Categories/WisBlock/RAK4631/Datasheet/ )
-
-P1.10   NSS     SPI NSS (Arduino GPIO number 42)
-P1.11   SCK     SPI CLK (Arduino GPIO number 43)
-P1.12   MOSI    SPI MOSI (Arduino GPIO number 44)
-P1.13   MISO    SPI MISO (Arduino GPIO number 45)
-P1.14   BUSY    BUSY signal (Arduino GPIO number 46)
-P1.15   DIO1    DIO1 event interrupt (Arduino GPIO number 47)
-P1.06   NRESET  NRESET manual reset of the SX1262 (Arduino GPIO number 38)
-
-Important for successful SX1262 initialization:
-
-* Setup DIO2 to control the antenna switch
-* Setup DIO3 to control the TCXO power supply
-* Setup the SX1262 to use it's DCDC regulator and not the LDO
-* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
-control of the antenna switch
-
-SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
-
-*/
-
-#define DETECTION_SENSOR_EN 4
-
-#define USE_SX1262
-#define SX126X_CS (42)
-#define SX126X_DIO1 (47)
-#define SX126X_BUSY (46)
-#define SX126X_RESET (38)
-// #define SX126X_TXEN (39)
-// #define SX126X_RXEN (37)
-#define SX126X_POWER_EN (37)
-// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-
-// Testing USB detection
-#define NRF_APM
-
-// enables 3.3V periphery like GPS or IO Module
-// Do not toggle this for GPS power savings
-#define PIN_3V3_EN (34)
-
-// RAK WISMESHTAG
-#define PIN_GPS_EN PIN_3V3_EN
-#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
-
-#define GPS_RX_PIN PIN_SERIAL1_RX
-#define GPS_TX_PIN PIN_SERIAL1_TX
-
-// RAK WISMESHTAG
-#define PIN_BUZZER 21 
-
-// Battery
-// The battery sense is hooked to pin A0 (5)
-#define BATTERY_PIN PIN_A0
-// and has 12 bit resolution
-#define BATTERY_SENSE_RESOLUTION_BITS 12
-#define BATTERY_SENSE_RESOLUTION 4096.0
-#undef AREF_VOLTAGE
-#define AREF_VOLTAGE 3.0
-#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
-#define ADC_MULTIPLIER 1.73
-
-#define RAK_4631 1
-
-#ifdef __cplusplus
-}
-#endif
-
-/*----------------------------------------------------------------------------
- *        Arduino objects - C++ only
- *----------------------------------------------------------------------------*/
-
-#endif

variants/seeed_wio_tracker_L1_eink/platformio.ini

@@ -4,8 +4,7 @@ extends = nrf52840_base, inkhud
 ;board_level = extra
 build_flags = ${nrf52840_base.build_flags}  ${inkhud.build_flags}
   -I $PROJECT_DIR/variants/seeed_wio_tracker_L1_eink
-  -D SEEED_WIO_TRACKER_L1_EINK
-  -D SEEED_WIO_TRACKER_L1
+  -D  SEEED_WIO_TRACKER_L1
   -Isrc/platform/nrf52/softdevice -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/seeed_wio_tracker_L1_eink> ${inkhud.build_src_filter}

variants/wio-e5/platformio.ini

@@ -10,12 +10,12 @@ build_flags =
   -DPIN_SERIAL_TX=PB6
   -DPIN_WIRE_SDA=PA15
   -DPIN_WIRE_SCL=PB15
-  -DHAS_SENSOR=1
-  -DENABLE_HWSERIAL2
-  -DPIN_SERIAL2_TX=PA2
-  -DPIN_SERIAL2_RX=PA3
-  -DHAS_GPS=1
-  -DGPS_SERIAL_PORT=Serial2
+  -DHAL_DAC_MODULE_ONLY
+  -DHAL_RNG_MODULE_ENABLED
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -DHAS_SENSOR
 
 upload_port = stlink
 

variants/wio-e5/variant.h

@@ -17,8 +17,6 @@ Do not expect a working Meshtastic device with this target.
 #define LED_PIN PB5
 #define LED_STATE_ON 1
 
-#define WIO_E5
-
 #if (defined(LED_BUILTIN) && LED_BUILTIN == PNUM_NOT_DEFINED)
 #undef LED_BUILTIN
 #define LED_BUILTIN (LED_PIN)