Merge branch 'master' into nomad-gemini

arch/esp32/esp32s2.ini

@@ -17,6 +17,3 @@ lib_ignore =
   ${esp32_base.lib_ignore} 
   NimBLE-Arduino
   libpax
-
-lib_deps = ${esp32_base.lib_deps}
-  tanakamasayuki/EspUsbHost@^1.0.2

arch/esp32/esp32s3.ini

@@ -3,6 +3,3 @@ extends = esp32_base
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
-
-lib_deps = ${esp32_base.lib_deps}
-  tanakamasayuki/EspUsbHost@^1.0.2

platformio.ini

@@ -26,6 +26,7 @@ build_flags = -Wno-missing-field-initializers
 	-DUSE_THREAD_NAMES
 	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
 	-DPB_ENABLE_MALLOC=1
+	-DRADIOLIB_LOW_LEVEL=1
 	-DRADIOLIB_EXCLUDE_CC1101=1
 	-DRADIOLIB_EXCLUDE_NRF24=1
 	-DRADIOLIB_EXCLUDE_RF69=1

src/input/kbUsbBase.cpp

@@ -1,72 +0,0 @@
-#include "kbUsbBase.h"
-#include "configuration.h"
-
-#if CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32S2
-
-KbUsbBase::KbUsbBase(const char *name) : concurrency::OSThread(name)
-{
-    this->_originName = name;
-}
-
-int32_t KbUsbBase::runOnce()
-{
-    if (firstTime) {
-        // This is the first time the OSThread library has called this function, so init the USB HID routines
-        begin();
-        firstTime = 0;
-    } else {
-
-        task();
-    }
-    return 100;
-}
-
-void KbUsbBase::onKeyboardKey(uint8_t ascii, uint8_t keycode, uint8_t modifier)
-{
-
-    if (ascii != 0) {
-        LOG_DEBUG("Key 0x%x Code 0x%x Mod 0x%x pressed\n", ascii, keycode, modifier);
-        // reset shift now that we have a keypress
-        InputEvent e;
-        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
-        e.source = this->_originName;
-        switch (ascii) {
-        case 0x1b: // ESC
-            e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL;
-            break;
-        case 0x08: // Back
-            e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_BACK;
-            e.kbchar = ascii;
-            break;
-        case 0xb5: // Up
-            e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP;
-            break;
-        case 0xb6: // Down
-            e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN;
-            break;
-        case 0xb4: // Left
-            e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT;
-            e.kbchar = ascii;
-            break;
-        case 0xb7: // Right
-            e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
-            e.kbchar = ascii;
-            break;
-        case 0x0d: // Enter
-            e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
-            break;
-        case 0x00: // nopress
-            e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
-            break;
-        default: // all other keys
-            e.inputEvent = ANYKEY;
-            e.kbchar = ascii;
-            break;
-        }
-        if (e.inputEvent != meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE) {
-            this->notifyObservers(&e);
-        }
-    }
-}
-
-#endif

src/input/kbUsbBase.h

@@ -1,21 +0,0 @@
-#pragma once
-
-#include "InputBroker.h"
-#include "concurrency/OSThread.h"
-#if CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32S2
-#include "EspUsbHost.h"
-
-class KbUsbBase : public Observable<const InputEvent *>, public concurrency::OSThread, public EspUsbHost
-{
-  public:
-    explicit KbUsbBase(const char *name);
-
-  protected:
-    virtual int32_t runOnce() override;
-
-  private:
-    void onKeyboardKey(uint8_t ascii, uint8_t keycode, uint8_t modifier);
-    const char *_originName;
-    bool firstTime = 1;
-};
-#endif

src/input/kbUsbImpl.cpp

@@ -1,15 +0,0 @@
-#include "kbUsbImpl.h"
-#include "InputBroker.h"
-
-#if CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32S2
-
-KbUsbImpl *kbUsbImpl;
-
-KbUsbImpl::KbUsbImpl() : KbUsbBase("usbKB") {}
-
-void KbUsbImpl::init()
-{
-    inputBroker->registerSource(this);
-}
-
-#endif // INPUTBROKER_MATRIX_TYPE

src/input/kbUsbImpl.h

@@ -1,23 +0,0 @@
-#pragma once
-#include "kbUsbBase.h"
-#include "main.h"
-
-#if CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32S2
-
-/**
- * @brief The idea behind this class to have static methods for the event handlers.
- *      Check attachInterrupt() at RotaryEncoderInteruptBase.cpp
- *      Technically you can have as many rotary encoders hardver attached
- *      to your device as you wish, but you always need to have separate event
- *      handlers, thus you need to have a RotaryEncoderInterrupt implementation.
- */
-class KbUsbImpl : public KbUsbBase
-{
-  public:
-    KbUsbImpl();
-    void init();
-};
-
-extern KbUsbImpl *kbUsbImpl;
-
-#endif

src/main.cpp

@@ -214,6 +214,8 @@ bool pauseBluetoothLogging = false;
 
 bool pmu_found;
 
+uint8_t pa_fan_percentage = 50;
+
 #if !MESHTASTIC_EXCLUDE_I2C
 // Array map of sensor types with i2c address and wire as we'll find in the i2c scan
 std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1] = {};
@@ -1375,16 +1377,36 @@ void setup()
     mqttInit();
 #endif
 
-#ifdef RF95_FAN_EN
-    // Ability to disable FAN if PIN has been set with RF95_FAN_EN.
+#ifdef RADIO_FAN_EN
+    // Ability to disable FAN if PIN has been set with RADIO_FAN_EN.
     // Make sure LoRa has been started before disabling FAN.
-    if (config.lora.pa_fan_disabled)
-        digitalWrite(RF95_FAN_EN, LOW ^ 0);
+#ifdef RADIO_FAN_PWM
+#if defined(ARCH_ESP32)
+    // Set up PWM at Channel 1 at 25KHz, using 8-bit resolution
+    // Turn ON/OFF fan to the specified value if enabled by config.
+    // code by https://github.com/gjelsoe/
+    if (ledcSetup(1, 25000, 8)) {
+        ledcAttachPin(RADIO_FAN_EN, 1);
+        LOG_INFO("PWM init C1 P%d\n", RADIO_FAN_EN);
+        // Set PWM duty cycle based on fan disabled state
+        ledcWrite(1, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+    } else {
+        LOG_WARN("PWM init fail P%d\n", RADIO_FAN_EN);
+    }
+#elif defined(ARCH_NRF52)
+    pinMode(RADIO_FAN_EN, OUTPUT);
+    analogWrite(RADIO_FAN_EN, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#endif
+#else
+    // Set up as ON/OFF switch of fan
+    pinMode(RADIO_FAN_EN, OUTPUT);
+    digitalWrite(RADIO_FAN_EN, LOW ^ 0);
+#endif
 #endif
 
 #ifndef ARCH_PORTDUINO
 
-        // Initialize Wifi
+    // Initialize Wifi
 #if HAS_WIFI
     initWifi();
 #endif

src/main.h

@@ -78,6 +78,8 @@ extern uint32_t shutdownAtMsec;
 
 extern uint32_t serialSinceMsec;
 
+extern uint8_t pa_fan_percentage;
+
 // If a thread does something that might need for it to be rescheduled ASAP it can set this flag
 // This will suppress the current delay and instead try to run ASAP.
 extern bool runASAP;

src/mesh/LR11x0Interface.cpp

@@ -3,6 +3,7 @@
 #include "Throttle.h"
 #include "configuration.h"
 #include "error.h"
+#include "main.h"
 #include "mesh/NodeDB.h"
 #ifdef LR11X0_DIO_AS_RF_SWITCH
 #include "rfswitch.h"
@@ -54,6 +55,8 @@ template <typename T> bool LR11x0Interface<T>::init()
     digitalWrite(LR11X0_POWER_EN, HIGH);
 #endif
 
+    enableFan();
+
 #if ARCH_PORTDUINO
     float tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
 // FIXME: correct logic to default to not using TCXO if no voltage is specified for LR11x0_DIO3_TCXO_VOLTAGE

src/mesh/RF95Interface.cpp

@@ -154,10 +154,7 @@ bool RF95Interface::init()
     digitalWrite(RF95_TXEN, 0);
 #endif
 
-#ifdef RF95_FAN_EN
-    pinMode(RF95_FAN_EN, OUTPUT);
-    digitalWrite(RF95_FAN_EN, 1);
-#endif
+    enableFan();
 
 #ifdef RF95_RXEN
     pinMode(RF95_RXEN, OUTPUT);
@@ -330,10 +327,7 @@ bool RF95Interface::sleep()
     // put chipset into sleep mode
     setStandby(); // First cancel any active receiving/sending
     lora->sleep();
-
-#ifdef RF95_FAN_EN
-    digitalWrite(RF95_FAN_EN, 0);
-#endif
+    disableFan();
 
     return true;
 }

src/mesh/RadioLibInterface.cpp

@@ -531,4 +531,37 @@ bool RadioLibInterface::startSend(meshtastic_MeshPacket *txp)
 
         return res == RADIOLIB_ERR_NONE;
     }
+}
+
+void RadioLibInterface::enableFan()
+{
+#ifdef RADIO_FAN_EN
+
+#ifdef RADIO_FAN_PWM
+#if defined(ARCH_ESP32)
+    ledcWrite(1, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#elif defined(ARCH_NRF52)
+    analogWrite(RADIO_FAN_EN, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#endif
+#else
+    pinMode(RADIO_FAN_EN, OUTPUT);
+    digitalWrite(RADIO_FAN_EN, 1);
+#endif
+#endif
+}
+
+void RadioLibInterface::disableFan()
+{
+#ifdef RADIO_FAN_EN
+#ifdef RADIO_FAN_PWM
+#if defined(ARCH_ESP32)
+    ledcWrite(1, 0);
+#elif defined(ARCH_NRF52)
+    analogWrite(RADIO_FAN_EN, 0);
+#endif
+#else
+    pinMode(RADIO_FAN_EN, OUTPUT);
+    digitalWrite(RADIO_FAN_EN, 0);
+#endif
+#endif
 }

src/mesh/RadioLibInterface.h

@@ -146,6 +146,9 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified
     /** Attempt to find a packet in the TxQueue. Returns true if the packet was found. */
     virtual bool findInTxQueue(NodeNum from, PacketId id) override;
 
+    void enableFan();
+    void disableFan();
+
   private:
     /** if we have something waiting to send, start a short (random) timer so we can come check for collision before actually
      * doing the transmit */

src/mesh/SX126xInterface.cpp

@@ -52,6 +52,8 @@ template <typename T> bool SX126xInterface<T>::init()
     pinMode(SX126X_POWER_EN, OUTPUT);
 #endif
 
+    enableFan();
+
 #if ARCH_PORTDUINO
     tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
     if (settingsMap[sx126x_ant_sw_pin] != RADIOLIB_NC) {

src/mesh/SX128xInterface.cpp

@@ -35,10 +35,7 @@ template <typename T> bool SX128xInterface<T>::init()
     digitalWrite(SX128X_POWER_EN, HIGH);
 #endif
 
-#ifdef RF95_FAN_EN
-    pinMode(RF95_FAN_EN, OUTPUT);
-    digitalWrite(RF95_FAN_EN, 1);
-#endif
+    enableFan();
 
 #if ARCH_PORTDUINO
     if (settingsMap[rxen_pin] != RADIOLIB_NC) {

src/modules/AdminModule.cpp

@@ -706,13 +706,21 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             requiresReboot = false;
         }
 
-#ifdef RF95_FAN_EN
+#ifdef RADIO_FAN_EN
+#ifdef RADIO_FAN_PWM
+#if defined(ARCH_ESP32)
+        ledcWrite(1, c.payload_variant.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#elif defined(ARCH_NFR52)
+        analogWrite(RADIO_FAN_EN, c.payload_variant.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
+#endif
+#else
         // Turn PA off if disabled by config
         if (c.payload_variant.lora.pa_fan_disabled) {
-            digitalWrite(RF95_FAN_EN, LOW ^ 0);
+            digitalWrite(RADIO_FAN_EN, LOW ^ 0);
         } else {
-            digitalWrite(RF95_FAN_EN, HIGH ^ 0);
+            digitalWrite(RADIO_FAN_EN, HIGH ^ 0);
         }
+#endif
 #endif
         config.lora = c.payload_variant.lora;
         // If we're setting region for the first time, init the region

src/modules/Modules.cpp

@@ -12,7 +12,6 @@
 #include "input/cardKbI2cImpl.h"
 #endif
 #include "input/kbMatrixImpl.h"
-#include "input/kbUsbImpl.h"
 #endif
 #if !MESHTASTIC_EXCLUDE_PKI
 #include "KeyVerificationModule.h"
@@ -182,14 +181,10 @@ void setupModules()
             kbMatrixImpl = new KbMatrixImpl();
             kbMatrixImpl->init();
 #endif // INPUTBROKER_MATRIX_TYPE
-#if CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32S2
-        kbUsbImpl = new KbUsbImpl();
-        kbUsbImpl->init();
-#endif
 #ifdef INPUTBROKER_SERIAL_TYPE
             aSerialKeyboardImpl = new SerialKeyboardImpl();
             aSerialKeyboardImpl->init();
-#endif // INPUTBROKER_SERIAL_TYPE
+#endif // INPUTBROKER_MATRIX_TYPE
         }
 #endif // HAS_BUTTON
 #if ARCH_PORTDUINO

variants/betafpv_2400_tx_micro/variant.h

@@ -12,7 +12,7 @@
 #define LORA_MISO 19
 #define LORA_MOSI 23
 #define LORA_CS 5
-#define RF95_FAN_EN 17
+#define RADIO_FAN_EN 17
 
 // #define LED_PIN 16 // This is a LED_WS2812 not a standard LED
 #define HAS_NEOPIXEL                         // Enable the use of neopixels

variants/bpi_picow_esp32_s3/platformio.ini

@@ -8,7 +8,7 @@ board_level = extra
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM2
 lib_deps =
-  ${esp32s3_base.lib_deps}
+  ${esp32_base.lib_deps}
   caveman99/ESP32 Codec2@^1.0.1
 build_flags = 
-  ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/bpi_picow_esp32_s3
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/bpi_picow_esp32_s3

variants/heltec_esp32c3/platformio.ini

@@ -2,7 +2,7 @@
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 build_flags = 
-  ${esp32c3_base.build_flags}
+  ${esp32_base.build_flags}
   -D HELTEC_HT62
   -I variants/heltec_esp32c3
 monitor_speed = 115200

variants/m5stack-stamp-c3/platformio.ini

@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32c3_base.build_flags}
+  ${esp32_base.build_flags}
   -D PRIVATE_HW
   -I variants/m5stack-stamp-c3
 monitor_speed = 115200

variants/my_esp32s3_diy_eink/platformio.ini

@@ -11,15 +11,15 @@ upload_speed = 921600
 platform_packages =
   platformio/tool-esptoolpy@^1.40801.0
 lib_deps =
-  ${esp32s3_base.lib_deps}
+  ${esp32_base.lib_deps}
   zinggjm/GxEPD2@^1.6.2
   adafruit/Adafruit NeoPixel @ ^1.12.0
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1
 build_flags = 
-  ;${esp32s3_base.build_flags} -D MY_ESP32S3_DIY -I variants/my_esp32s3_diy_eink
-  ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/my_esp32s3_diy_eink
+  ;${esp32_base.build_flags} -D MY_ESP32S3_DIY -I variants/my_esp32s3_diy_eink
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/my_esp32s3_diy_eink
   -Dmy
   -DEINK_DISPLAY_MODEL=GxEPD2_290_T5D
   -DEINK_WIDTH=296

variants/my_esp32s3_diy_oled/platformio.ini

@@ -11,14 +11,14 @@ upload_speed = 921600
 platform_packages =
   platformio/tool-esptoolpy@^1.40801.0
 lib_deps =
-  ${esp32s3_base.lib_deps}
+  ${esp32_base.lib_deps}
   adafruit/Adafruit NeoPixel @ ^1.12.0
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1
 build_flags = 
-  ;${esp32s3_base.build_flags} -D MY_ESP32S3_DIY -I variants/my_esp32s3_diy_oled
-  ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/my_esp32s3_diy_oled
+  ;${esp32_base.build_flags} -D MY_ESP32S3_DIY -I variants/my_esp32s3_diy_oled
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/my_esp32s3_diy_oled
   -DBOARD_HAS_PSRAM
   -mfix-esp32-psram-cache-issue
   -DARDUINO_USB_MODE=0

variants/radiomaster_900_bandit/variant.h

@@ -46,7 +46,8 @@
   FAN is active at 250mW on it's ExpressLRS Firmware.
   This FAN has TACHO signal on Pin 27 for use with PWM.
 */
-#define RF95_FAN_EN 2
+#define RADIO_FAN_EN 2
+#define RADIO_FAN_PWM
 
 /*
   LED PIN setup and it has a NeoPixel LED.

variants/radiomaster_900_bandit_nano/variant.h

@@ -32,7 +32,7 @@
   This unit has a FAN built-in.
   FAN is active at 250mW on it's ExpressLRS Firmware.
 */
-#define RF95_FAN_EN 2
+#define RADIO_FAN_EN 2
 
 /*
   LED PIN setup.

variants/radiomaster_nomad_gemini/platformio.ini

@@ -0,0 +1,20 @@
+[env:radiomaster_nomad_gemini]
+extends = esp32_base
+board = esp32doit-devkit-v1
+build_flags =
+  ${esp32_base.build_flags}
+  -DRADIOMASTER_NOMAD_GEMINI
+  -DPRIVATE_HW
+  -DVTABLES_IN_FLASH=1
+  -DCONFIG_DISABLE_HAL_LOCKS=1
+  -O2
+  -Ivariants/radiomaster_nomad_gemini
+  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
+  -DMESHTASTIC_EXCLUDE_I2C=1
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_SX126X=1
+board_build.f_cpu = 240000000L
+upload_protocol = esptool
+lib_deps =
+  ${esp32_base.lib_deps}

variants/radiomaster_nomad_gemini/rfswitch.h

@@ -0,0 +1,56 @@
+#include "RadioLib.h"
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7,
+                                             RADIOLIB_LR11X0_DIO8, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode                  DIO5  DIO6 DIO7 DIO8
+    {LR11x0::MODE_STBY, {LOW, LOW, LOW, LOW}},   {LR11x0::MODE_RX, {LOW, LOW, HIGH, LOW}},
+    {LR11x0::MODE_TX, {LOW, LOW, LOW, HIGH}},    {LR11x0::MODE_TX_HP, {LOW, LOW, LOW, HIGH}},
+    {LR11x0::MODE_TX_HF, {LOW, HIGH, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, LOW, LOW}},
+    {LR11x0::MODE_WIFI, {HIGH, LOW, LOW, LOW}},  END_OF_MODE_TABLE,
+};
+
+/*
+
+DIO5: RXEN 2.4GHz
+DIO6: TXEN 2.4GHz
+DIO7: RXEN 900MHz
+DIO8: TXEN 900MHz
+
+
+  "radio_dcdc": true,
+  "radio_rfo_hf": true,
+
+    "power_apc2": 26,
+    "power_min": 0,
+    "power_high": 6,
+    "power_max": 6,
+    "power_default": 3,
+    "power_control": 3, POWER_OUTPUT_DACWRITE // use internal dacWrite function to set value on GPIO_PIN_RFamp_APC2
+                         [0,   1,   2,   3,   4,   5,   6 ] // 0-6
+    "power_values":      [120, 120, 120, 120, 120, 120, 95] // DAC Value
+    "power_values2":     [-17, -16, -14, -11, -7,  -3,  5 ] // 900M
+    "power_values_dual": [-18, -14,  -8,  -6, -2,   3,  5 ] // 2.4G
+
+    // default value 0 means direct!
+#define POWER_OUTPUT_DACWRITE (hardware_int(HARDWARE_power_control)==3)
+#define POWER_OUTPUT_VALUES hardware_i16_array(HARDWARE_power_values)
+#define POWER_OUTPUT_VALUES_COUNT hardware_int(HARDWARE_power_values_count)
+#define POWER_OUTPUT_VALUES2 hardware_i16_array(HARDWARE_power_values2)
+#define POWER_OUTPUT_VALUES_DUAL hardware_i16_array(HARDWARE_power_values_dual)
+#define POWER_OUTPUT_VALUES_DUAL_COUNT hardware_int(HARDWARE_power_values_dual_count)
+
+#define GPIO_PIN_FAN_EN hardware_pin(HARDWARE_misc_fan_en)
+
+    case PWR_10mW: return 10;
+    case PWR_25mW: return 14;
+    case PWR_50mW: return 17;
+    case PWR_100mW: return 20;
+    case PWR_250mW: return 24;
+    case PWR_500mW: return 27;
+    case PWR_1000mW: return 30;
+
+    95 -> +25dBm
+    120 -> +24dBm
+*/

variants/radiomaster_nomad_gemini/variant.h

@@ -0,0 +1,60 @@
+#define HAS_SCREEN 0
+#define HAS_WIRE 0
+#define HAS_GPS 0
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+
+#define PIN_SPI_MISO 33
+#define PIN_SPI_MOSI 32
+#define PIN_SPI_SCK 25
+#define PIN_SPI_NSS 27
+
+#define LORA_RESET 15
+#define LORA_DIO1 37
+#define LORA_DIO2 36
+#define LORA_SCK PIN_SPI_SCK
+#define LORA_MISO PIN_SPI_MISO
+#define LORA_MOSI PIN_SPI_MOSI
+#define LORA_CS PIN_SPI_NSS
+
+// supported modules list
+#define USE_LR1121
+
+#define LR1121_IRQ_PIN LORA_DIO1
+#define LR1121_NRESET_PIN LORA_RESET
+#define LR1121_BUSY_PIN LORA_DIO2
+#define LR1121_SPI_NSS_PIN LORA_CS
+#define LR1121_SPI_SCK_PIN LORA_SCK
+#define LR1121_SPI_MOSI_PIN LORA_MOSI
+#define LR1121_SPI_MISO_PIN LORA_MISO
+
+// this is correct and sets the cap for the Sub-GHz part
+#define LR1110_MAX_POWER 5
+// 2.4G Part
+#define LR1120_MAX_POWER 5
+
+#define POWER_SHIFT -20
+
+// not yet implemented
+#define JANUS_RADIO
+#define LR1121_IRQ2_PIN 34
+#define LR1121_NRESET2_PIN 21
+#define LR1121_BUSY2_PIN 39
+#define LR1121_SPI_NSS2_PIN 13
+
+// TODO: check if this is correct
+// #define LR11X0_DIO3_TCXO_VOLTAGE 1.6
+#define LR11X0_DIO_AS_RF_SWITCH
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 2                     // How many neopixels are connected
+#define NEOPIXEL_DATA 22                     // GPIO pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // Type of neopixels in use
+#define ENABLE_AMBIENTLIGHTING               // Turn on Ambient Lighting
+
+#define BUTTON_PIN 34
+#define BUTTON_NEED_PULLUP
+
+#undef EXT_NOTIFY_OUT
+
+#define RADIO_FAN_EN 2

variants/tlora_t3s3_v1/platformio.ini

@@ -5,5 +5,5 @@ board_check = true
 upload_protocol = esptool
 
 build_flags = 
-  ${esp32s3_base.build_flags} -D TLORA_T3S3_V1 -I variants/tlora_t3s3_v1
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  ${esp32_base.build_flags} -D TLORA_T3S3_V1 -I variants/tlora_t3s3_v1
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.