TomThumb Font

* Make RAK4631 nodes power back on deep sleep

The devices will hang if the VBAT goes under 1.7V (Brown-out reset) and
they will never come back unless power supply goes completely off.

This kills unattended nodes.

Using the SystemOff the LPCOMP we can get the nodes back again when
power comes back, even if VBAT goes under 1.7V, which moreover is more
unlikely because the device is off.

* Adding support for heltec t114

And moved particularities to variant.h

* Remove old cpp comment that belongs to variant.h

It was a leftover.

* Trunk fix

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>

.clusterfuzzlite/router_fuzzer.cpp

@@ -76,7 +76,7 @@ bool loopCanSleep()
 // Called just prior to starting Meshtastic. Allows for setting config values before startup.
 void lateInitVariant()
 {
-    settingsMap[logoutputlevel] = level_error;
+    portduino_config.logoutputlevel = level_error;
     channelFile.channels[0] = meshtastic_Channel{
         .has_settings = true,
         .settings =
@@ -132,7 +132,7 @@ int portduino_main(int argc, char **argv); // Renamed "main" function from Mesht
 // Start Meshtastic in a thread and wait till it has reached the ON state.
 int LLVMFuzzerInitialize(int *argc, char ***argv)
 {
-    settingsMap[maxtophone] = 5;
+    portduino_config.maxtophone = 5;
 
     meshtasticThread = std::thread([program = *argv[0]]() {
         char nodeIdStr[12];

.devcontainer/Dockerfile

@@ -1,7 +1,7 @@
 # trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
-FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
+FROM mcr.microsoft.com/devcontainers/cpp:2-debian-13
 
 USER root
 

.devcontainer/devcontainer.json

@@ -8,7 +8,7 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "latest"
+      "version": "3.14"
     }
   },
   "customizations": {

.github/actions/build-variant/action.yml

@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v5
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true

.github/actions/setup-base/action.yml

@@ -11,11 +11,6 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Uncomment build epoch
-      shell: bash
-      run: |
-        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
     - name: Install dependencies
       shell: bash
       run: |
@@ -23,7 +18,7 @@ runs:
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
 
     - name: Setup Python
-      uses: actions/setup-python@v5
+      uses: actions/setup-python@v6
       with:
         python-version: 3.x
         cache: pip

.github/workflows/build_debian_src.yml

@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -19,6 +19,8 @@ jobs:
   pio-build:
     name: build-${{ inputs.platform }}
     runs-on: ubuntu-24.04
+    outputs:
+      artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
       - uses: actions/checkout@v5
         with:
@@ -54,7 +56,8 @@ jobs:
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
+        id: upload
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
           overwrite: true

.github/workflows/build_one_arch.yml

@@ -0,0 +1,176 @@
+name: Build One Arch
+
+on:
+  workflow_dispatch:
+    inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
+      arch:
+        type: choice
+        options:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+          - native
+
+permissions: read-all
+
+env:
+  INPUT_ARCH: ${{ github.event.inputs.arch }}
+
+jobs:
+  setup:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v5
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v5
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  build:
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    needs: [setup, version]
+    strategy:
+      fail-fast: false
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.arch }}
+
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
+    uses: ./.github/workflows/test_native.yml
+
+  gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v5
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v6
+        with:
+          path: ./
+          pattern: firmware-${{inputs.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*-ota.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v6
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_one_target.yml

@@ -0,0 +1,182 @@
+name: Build One Target
+
+on:
+  workflow_dispatch:
+    inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
+      arch:
+        type: choice
+        options:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+          - native
+      target:
+        type: string
+        required: false
+        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
+      # find-target:
+      #   type: boolean
+      #   default: true
+      #   description: 'Find the available targets'
+
+permissions: read-all
+
+jobs:
+  find-targets:
+    if: ${{ inputs.target == '' }}
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v5
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level extra)
+          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
+          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
+          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
+          echo "Targets:" >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS >> $GITHUB_STEP_SUMMARY
+
+  version:
+    if: ${{ inputs.target != '' }}
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v5
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  build:
+    if: ${{ inputs.target != '' && inputs.arch != 'native' }}
+    needs: [version]
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ inputs.target }}
+      platform: ${{ inputs.arch }}
+
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
+    uses: ./.github/workflows/test_native.yml
+
+  gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v5
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v6
+        with:
+          path: ./
+          pattern: firmware-*-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*-ota.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v6
+        with:
+          pattern: firmware-*-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/daily_packaging.yml

@@ -21,18 +21,20 @@ permissions:
 
 jobs:
   docker-multiarch:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_manifest.yml
     with:
       release_channel: daily
     secrets: inherit
 
   package-ppa:
+    if: github.repository == 'meshtastic/firmware'
     strategy:
       fail-fast: false
       matrix:
         series:
-          - jammy # 22.04
-          - noble # 24.04
+          - jammy # 22.04 LTS
+          - noble # 24.04 LTS
           - plucky # 25.04
           - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
@@ -42,6 +44,7 @@ jobs:
     secrets: inherit
 
   package-obs:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/package_obs.yml
     with:
       obs_project: network:Meshtastic:daily
@@ -49,6 +52,7 @@ jobs:
     secrets: inherit
 
   hook-copr:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/hook_copr.yml
     with:
       copr_project: daily

.github/workflows/main_matrix.yml

@@ -3,7 +3,7 @@ concurrency:
   group: ci-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
 on:
-  # # Triggers the workflow on push but only for the master branch
+  # # Triggers the workflow on push but only for the main branches
   push:
     branches:
       - master
@@ -28,22 +28,15 @@ on:
 jobs:
   setup:
     strategy:
-      fail-fast: false
+      fail-fast: true
       matrix:
         arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
+          - all
           - check
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v5
-      - uses: actions/setup-python@v5
+      - uses: actions/setup-python@v6
         with:
           python-version: 3.x
           cache: pip
@@ -54,19 +47,13 @@ jobs:
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
           fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+          echo "$TARGETS" >> $GITHUB_STEP_SUMMARY
     outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
+      all: ${{ steps.jsonStep.outputs.all }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   version:
@@ -88,105 +75,30 @@ jobs:
     needs: setup
     strategy:
       fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.check) }}
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
+    if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
       - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.board }}
-        run: bin/check-all.sh ${{ matrix.board }}
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
 
-  build-esp32:
+  build:
     needs: [setup, version]
     strategy:
       fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
     uses: ./.github/workflows/build_firmware.yml
     with:
       version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
 
   build-debian-src:
     if: github.repository == 'meshtastic/firmware'
@@ -197,67 +109,41 @@ jobs:
     secrets: inherit
 
   package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name == 'workflow_dispatch' }}
     uses: ./.github/workflows/package_pio_deps.yml
     with:
       pio_env: native-tft
     secrets: inherit
 
   test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
+    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
     uses: ./.github/workflows/test_native.yml
 
-  docker-deb-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
             platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
       push: false
 
   gather-artifacts:
+    # trunk-ignore(checkov/CKV2_GHA_1)
+    if: github.repository == 'meshtastic/firmware'
     permissions:
       contents: write
       pull-requests: write
@@ -274,18 +160,7 @@ jobs:
           - rp2350
           - stm32
     runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
+    needs: [version, build]
     steps:
       - name: Checkout code
         uses: actions/checkout@v5
@@ -293,7 +168,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -306,7 +181,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -322,7 +197,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -341,7 +216,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -357,7 +232,7 @@ jobs:
 
   release-artifacts:
     runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
+    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
@@ -370,7 +245,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
@@ -386,14 +261,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -432,18 +307,18 @@ jobs:
           - rp2350
           - stm32
     runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
+    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware'}}
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -460,7 +335,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -494,11 +369,11 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/merge_queue.yml

@@ -0,0 +1,376 @@
+name: Merge Queue
+# Not sure how concurrency works in merge_queue, removing for now.
+# concurrency:
+#   group: merge-queue-${{ github.head_ref || github.run_id }}
+#   cancel-in-progress: true
+on:
+  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
+  merge_group:
+
+jobs:
+  setup:
+    strategy:
+      fail-fast: true
+      matrix:
+        arch:
+          - all
+          - check
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v5
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          else  
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} --level pr)
+          fi
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "${{matrix.arch}}=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      all: ${{ steps.jsonStep.outputs.all }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v5
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: true
+      matrix:
+        check: ${{ fromJson(needs.setup.outputs.check) }}
+
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    steps:
+      - uses: actions/checkout@v5
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+      - name: Check ${{ matrix.check.board }}
+        run: bin/check-all.sh ${{ matrix.check.board }}
+
+  build:
+    needs: [setup, version]
+    strategy:
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.all) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.platform }}
+
+  build-debian-src:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker:
+    strategy:
+      fail-fast: false
+      matrix:
+        distro: [debian, alpine]
+        platform: [linux/amd64, linux/arm64, linux/arm/v7]
+        pio_env: [native, native-tft]
+        exclude:
+          - distro: alpine
+            platform: linux/arm/v7
+          - pio_env: native-tft
+            platform: linux/arm64
+          - pio_env: native-tft
+            platform: linux/arm/v7
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: ${{ matrix.distro }}
+      platform: ${{ matrix.platform }}
+      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
+      pio_env: ${{ matrix.pio_env }}
+      push: false
+
+  gather-artifacts:
+    # trunk-ignore(checkov/CKV2_GHA_1)
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v5
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v6
+        with:
+          path: ./
+          pattern: firmware-${{matrix.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*-ota.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v6
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v5
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+
+  release-artifacts:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    outputs:
+      upload_url: ${{ steps.create_release.outputs.upload_url }}
+    needs:
+      - version
+      - gather-artifacts
+      - build-debian-src
+      - package-pio-deps-native-tft
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v5
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - name: Create release
+        uses: softprops/action-gh-release@v2
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
+          tag_name: v${{ needs.version.outputs.long }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
+
+      - name: Download source deb
+        uses: actions/download-artifact@v6
+        with:
+          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          merge-multiple: true
+          path: ./output/debian-src
+
+      - name: Download `native-tft` pio deps
+        uses: actions/download-artifact@v6
+        with:
+          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output/pio-deps-native-tft
+
+      - name: Zip Linux sources
+        working-directory: output
+        run: |
+          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
+          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
+          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  release-firmware:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts, version]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v5
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v6
+        with:
+          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - uses: actions/download-artifact@v6
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip debug elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
+        run: |
+          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-24.04
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware, version]
+    env:
+      targets: |-
+        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v5
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+
+      - uses: actions/download-artifact@v6
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ needs.version.outputs.long }}
+          enable_jekyll: true

.github/workflows/package_obs.yml

@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -31,7 +31,7 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -10,10 +10,10 @@ permissions:
 
 jobs:
   check-label:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     steps:
       - name: Check for PR labels
-        uses: actions/github-script@v7
+        uses: actions/github-script@v8
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);

.github/workflows/pr_tests.yml

@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
@@ -177,7 +177,7 @@ jobs:
 
       - name: Comment test results on PR
         if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v7
+        uses: actions/github-script@v8
         with:
           script: |
             const fs = require('fs');

.github/workflows/release_channels.yml

@@ -21,10 +21,10 @@ jobs:
       fail-fast: false
       matrix:
         series:
-          - jammy # 22.04
-          - noble # 24.04
+          - jammy # 22.04 LTS
+          - noble # 24.04 LTS
           - plucky # 25.04
-          # - questing # 25.10
+          - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -63,7 +63,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 

.github/workflows/sec_sast_semgrep_cron.yml

@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: report.sarif
           overwrite: true
@@ -41,7 +41,7 @@ jobs:
 
       # step 4
       - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v3
+        uses: github/codeql-action/upload-sarif@v4
         with:
           sarif_file: report.sarif
           category: semgrep

.github/workflows/stale_bot.yml

@@ -17,8 +17,10 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v9.1.0
+        uses: actions/stale@v10.1.0
         with:
           days-before-stale: 45
-          exempt-issue-labels: pinned,3.0
-          exempt-pr-labels: pinned,3.0
+          stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
+          close-issue-message: This issue has not had any comment since the last notice. It has been closed automatically. If this is incorrect, or the issue becomes relevant again, please request that it is reopened.
+          exempt-issue-labels: pinned,3.0,triaged,backlog
+          exempt-pr-labels: pinned,3.0,triaged,backlog

.github/workflows/test_native.yml

@@ -40,7 +40,7 @@ jobs:
 
       - name: Integration test
         run: |
-          .pio/build/coverage/program &
+          .pio/build/coverage/program -s &
           PID=$!
           timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
           echo "Simulator started, launching python test..."
@@ -59,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
@@ -94,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
@@ -108,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
@@ -137,7 +137,7 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
@@ -150,7 +150,7 @@ jobs:
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -47,9 +47,9 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v4
+        uses: actions/setup-node@v6
         with:
-          node-version: 22
+          node-version: 24
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/trunk_format_pr.yml

@@ -39,7 +39,7 @@ jobs:
           git push
 
       - name: Comment on PR
-        uses: actions/github-script@v7
+        uses: actions/github-script@v8
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.trunk/trunk.yaml

@@ -4,29 +4,29 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.1
+      ref: v1.7.3
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.461
-    - renovate@41.74.0
+    - checkov@3.2.489
+    - renovate@41.169.1
     - prettier@3.6.2
-    - trufflehog@3.90.5
+    - trufflehog@3.90.12
     - yamllint@1.37.1
     - bandit@1.8.6
-    - trivy@0.64.1
-    - taplo@0.9.3
-    - ruff@0.12.7
-    - isort@6.0.1
+    - trivy@0.67.2
+    - taplo@0.10.0
+    - ruff@0.14.3
+    - isort@7.0.0
     - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.7
+    - actionlint@1.7.8
     - flake8@7.3.0
-    - hadolint@2.12.1-beta
+    - hadolint@2.14.0
     - shfmt@3.6.0
-    - shellcheck@0.10.0
-    - black@25.1.0
+    - shellcheck@0.11.0
+    - black@25.9.0
     - git-diff-check
     - gitleaks@8.28.0
     - clang-format@16.0.3

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-slim-trixie AS builder
+FROM python:3.14-slim-trixie AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC

alpine.Dockerfile

@@ -3,12 +3,13 @@
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-alpine3.22 AS builder
+FROM python:3.14-alpine3.22 AS builder
 ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
 
 RUN apk --no-cache add \
-        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
+        bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
+        libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
         libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
@@ -40,8 +41,8 @@ LABEL org.opencontainers.image.title="Meshtastic" \
 USER root
 
 RUN apk --no-cache add \
-        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
-        libx11 libinput libxkbcommon \
+        shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
+        i2c-tools libuv libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

arch/esp32/esp32.ini

@@ -31,11 +31,13 @@ build_flags =
   -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
   -DAXP_DEBUG_PORT=Serial
   -DCONFIG_BT_NIMBLE_ENABLED
+  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
   -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
+  -DSERIAL_HAS_ON_RECEIVE
   -DLIBPAX_ARDUINO
   -DLIBPAX_WIFI
   -DLIBPAX_BLE
@@ -55,7 +57,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.1.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/esp32/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.0
+  lewisxhe/XPowersLib@0.3.1
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/37d986499ce24511952d7146db72d667c6bdaff7.zip
+  https://github.com/meshtastic/platform-native/archive/f566d364204416cdbf298e349213f7d551f793d9.zip
 framework = arduino
 
 build_src_filter = 
@@ -31,6 +31,8 @@ lib_deps =
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
+  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
+  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 build_flags =
   ${arduino_base.build_flags}

arch/stm32/stm32.ini

@@ -37,6 +37,9 @@ build_flags =
   -DRADIOLIB_EXCLUDE_LR11X0=1
   -DHAL_DAC_MODULE_ONLY
   -DHAL_RNG_MODULE_ENABLED
+  -Wl,--wrap=__assert_func
+  -Wl,--wrap=strerror
+  -Wl,--wrap=_tzset_unlocked_r
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
@@ -50,7 +53,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
 
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
+  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
 
 lib_ignore =
   OneButton

bin/build-firmware.sh

@@ -1,7 +1,5 @@
 #!/usr/bin/env bash
 
-sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
 export PIP_BREAK_SYSTEM_PACKAGES=1
 
 if (echo $2 | grep -q "esp32"); then

bin/device-install.bat

@@ -7,6 +7,7 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
+SET "MUIDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
@@ -14,11 +15,12 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv heltec-v4"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
+SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv heltec-v4"
 
 GOTO getopts
 :help
@@ -100,7 +102,6 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
-SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
@@ -120,11 +121,10 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
+IF %ERRORLEVEL% EQU 9009 (
+    @REM 9009 = command not found on Windows
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
-    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -142,7 +142,7 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %BPS_RESET% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL 1200 --after no_reset read_flash_status
     GOTO eof
 )
 
@@ -164,6 +164,15 @@ FOR %%a IN (%BIGDB_8MB%) DO (
 )
 :end_loop_bigdb_8mb
 
+FOR %%a IN (%MUIDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %MUIDB_8MB%.
+        SET "MUIDB8=1"
+        GOTO end_loop_muidb_8mb
+    )
+)
+:end_loop_muidb_8mb
+
 FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %BIGDB_16MB%.
@@ -174,6 +183,7 @@ FOR %%a IN (%BIGDB_16MB%) DO (
 :end_loop_bigdb_16mb
 
 IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
 IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
@@ -218,6 +228,12 @@ IF %BIGDB8% EQU 1 (
     SET "SPIFFS_OFFSET=0x670000"
 )
 
+@REM Offsets for MUIDB 8mb.
+IF %MUIDB8% EQU 1 (
+    SET "OTA_OFFSET=0x5D0000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
 @REM Offsets for BigDB 16mb.
 IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"

bin/device-install.sh

@@ -1,15 +1,16 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
+# Constants
+RESET_BAUD=1200
+FIRMWARE_OFFSET=0x00
+
 # Variant groups
 BIGDB_8MB=(
-	"picomputer-s3"
-	"unphone"
-	"seeed-sensecap-indicator"
     "crowpanel-esp32s3"
     "heltec_capsule_sensor_v3"
     "heltec-v3"
@@ -24,29 +25,36 @@ BIGDB_8MB=(
     "tbeam-s3-core"
     "tracksenger"
 )
+MUIDB_8MB=(
+    "picomputer-s3"
+    "unphone"
+    "seeed-sensecap-indicator"
+)
 BIGDB_16MB=(
-	"t-deck"
-	"mesh-tab"
-	"t-energy-s3"
     "dreamcatcher"
+    "elecrow-adv"
     "ESP32-S3-Pico"
+    "heltec-v4"
     "m5stack-cores3"
+    "mesh-tab"
     "station-g2"
+    "t-deck"
+    "t-energy-s3"
     "t-eth-elite"
     "t-watch-s3"
-    "elecrow-adv-35-tft"
-    "elecrow-adv-24-28-tft"
-    "elecrow-adv1-43-50-70-tft"
+    "tlora-pager"
 )
 S3_VARIANTS=(
     "s3"
     "-v3"
+    "-v4"
     "t-deck"
     "wireless-paper"
     "wireless-tracker"
     "station-g2"
     "unphone"
     "t-eth-elite"
+    "tlora-pager"
     "mesh-tab"
     "dreamcatcher"
     "ESP32-S3-Pico"
@@ -121,7 +129,7 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
 	exit 0
 fi
 
@@ -158,6 +166,13 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         fi
     done
 
+    for variant in "${MUIDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x5D0000
+        fi
+    done
+
     # littlefs* offset for BigDB 16mb and OTA OFFSET.
     for variant in "${BIGDB_16MB[@]}"; do
         if [ -z "${FILENAME##*"$variant"*}" ]; then
@@ -201,8 +216,8 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase_flash
-    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
+    $ESPTOOL_CMD erase-flash
+    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
     $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"

bin/device-update.bat

@@ -6,6 +6,8 @@ SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
+SET "RESET_BAUD=1200"
+SET "UPDATE_OFFSET=0x10000"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "CHANGE_MODE=0"
@@ -85,14 +87,13 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
-SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
+    SET "ESPTOOL_CMD=""!PYTHON!"" -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -105,11 +106,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
+CALL :LOG_MESSAGE DEBUG "esptool exit code: %ERRORLEVEL%"
+IF %ERRORLEVEL% EQU 9009 (
+    @REM 9009 = command not found on Windows
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
-    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -127,13 +128,13 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %CHANGE_MODE% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !RESET_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
 @REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
+CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET !UPDATE_OFFSET!..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !UPDATE_OFFSET! "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -145,9 +146,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase-flash|write-flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-update.sh

@@ -1,8 +1,13 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
 
+# Constants
+FLASH_BAUD=115200
+RESET_BAUD=1200
+UPDATE_OFFSET=0x10000
+
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
     ESPTOOL_CMD="$PYTHON -m esptool"
@@ -64,7 +69,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
     exit 0
 fi
 
@@ -75,7 +80,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
+    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -1,28 +1,32 @@
-#!/usr/bin/env python
+#!/usr/bin/env python3
 
 """Generate the CI matrix."""
 
+import argparse
 import json
-import sys
-import random
 import re
 from platformio.project.config import ProjectConfig
 
-options = sys.argv[1:]
+parser = argparse.ArgumentParser(description="Generate the CI matrix")
+parser.add_argument("platform", help="Platform to build for")
+parser.add_argument(
+  "--level",
+  choices=["extra", "pr"],
+  nargs="*",
+  default=[],
+  help="Board level to build for (omit for full release boards)",
+)
+args = parser.parse_args()
 
 outlist = []
 
-if len(options) < 1:
-  print(json.dumps(outlist))
-  exit(1)
-
 cfg = ProjectConfig.get_instance()
 pio_envs = cfg.envs()
 
 # Gather all PlatformIO environments for filtering later
 all_envs = []
 for pio_env in pio_envs:
-  env_build_flags = cfg.get(f"env:{pio_env}", 'build_flags')
+  env_build_flags = cfg.get(f"env:{pio_env}", "build_flags")
   env_platform = None
   for flag in env_build_flags:
     # Extract the platform from the build flags
@@ -37,36 +41,35 @@ for pio_env in pio_envs:
     exit(1)
   # Store env details as a dictionary, and add to 'all_envs' list
   env = {
-    'name': pio_env,
-    'platform': env_platform,
-    'board_level': cfg.get(f"env:{pio_env}", 'board_level', default=None),
-    'board_check': bool(cfg.get(f"env:{pio_env}", 'board_check', default=False))
+    "ci": {"board": pio_env, "platform": env_platform},
+    "board_level": cfg.get(f"env:{pio_env}", "board_level", default=None),
+    "board_check": bool(cfg.get(f"env:{pio_env}", "board_check", default=False)),
   }
   all_envs.append(env)
 
 # Filter outputs based on options
 # Check is mutually exclusive with other options (except 'pr')
-if "check" in options:
+if "check" in args.platform:
   for env in all_envs:
-    if env['board_check']:
-      if "pr" in options:
-        if env['board_level'] == 'pr':
-          outlist.append(env['name'])
+    if env["board_check"]:
+      if "pr" in args.level:
+        if env["board_level"] == "pr":
+          outlist.append(env["ci"])
       else:
-        outlist.append(env['name'])
+        outlist.append(env["ci"])
 # Filter (non-check) builds by platform
 else:
   for env in all_envs:
-    if options[0] == env['platform']:
+    if args.platform == env["ci"]["platform"] or args.platform == "all":
       # Always include board_level = 'pr'
-      if env['board_level'] == 'pr':
-        outlist.append(env['name'])
+      if env["board_level"] == "pr":
+        outlist.append(env["ci"])
       # Include board_level = 'extra' when requested
-      elif "extra" in options and env['board_level'] == "extra":
-        outlist.append(env['name'])
+      elif "extra" in args.level and env["board_level"] == "extra":
+        outlist.append(env["ci"])
       # If no board level is specified, include in release builds (not PR)
-      elif "pr" not in options and not env['board_level']:
-        outlist.append(env['name'])
+      elif "pr" not in args.level and not env["board_level"]:
+        outlist.append(env["ci"])
 
 # Return as a JSON list
 print(json.dumps(outlist))

bin/kill-github-actions.sh

@@ -0,0 +1,116 @@
+#!/bin/bash
+
+# Script to cancel all running GitHub Actions workflows
+# Requires GitHub CLI (gh) to be installed and authenticated
+
+set -e
+
+# Colors for output
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[1;33m'
+NC='\033[0m' # No Color
+
+# Function to print colored output
+print_status() {
+    echo -e "${GREEN}[INFO]${NC} $1"
+}
+
+print_warning() {
+    echo -e "${YELLOW}[WARN]${NC} $1"
+}
+
+print_error() {
+    echo -e "${RED}[ERROR]${NC} $1"
+}
+
+# Check if gh CLI is installed
+if ! command -v gh &> /dev/null; then
+    print_error "GitHub CLI (gh) is not installed. Please install it first:"
+    echo "  brew install gh"
+    echo "  Or visit: https://cli.github.com/"
+    exit 1
+fi
+
+# Check if authenticated
+if ! gh auth status &> /dev/null; then
+    print_error "GitHub CLI is not authenticated. Please run:"
+    echo "  gh auth login"
+    exit 1
+fi
+
+# Get repository info
+REPO=$(gh repo view --json owner,name -q '.owner.login + "/" + .name')
+if [[ -z "$REPO" ]]; then
+    print_error "Could not determine repository. Make sure you're in a GitHub repository."
+    exit 1
+fi
+
+print_status "Working with repository: $REPO"
+
+# Get all active workflows (both queued and in-progress)
+print_status "Fetching active workflows (queued and in-progress)..."
+QUEUED_WORKFLOWS=$(gh run list --status queued --json databaseId,displayTitle,headBranch,status --limit 100)
+IN_PROGRESS_WORKFLOWS=$(gh run list --status in_progress --json databaseId,displayTitle,headBranch,status --limit 100)
+
+# Combine both lists
+ALL_WORKFLOWS=$(echo "$QUEUED_WORKFLOWS $IN_PROGRESS_WORKFLOWS" | jq -s 'add | unique_by(.databaseId)')
+
+if [[ "$ALL_WORKFLOWS" == "[]" ]]; then
+    print_status "No active workflows found."
+    exit 0
+fi
+
+# Parse and display active workflows
+echo
+print_warning "Found active workflows:"
+echo "$ALL_WORKFLOWS" | jq -r '.[] | "  - \(.displayTitle) (Branch: \(.headBranch), Status: \(.status), ID: \(.databaseId))"'
+
+echo
+read -p "Do you want to cancel ALL these workflows? (y/N): " -n 1 -r
+echo
+
+if [[ ! $REPLY =~ ^[Yy]$ ]]; then
+    print_status "Cancelled by user."
+    exit 0
+fi
+
+# Cancel each workflow
+print_status "Cancelling workflows..."
+CANCELLED_COUNT=0
+FAILED_COUNT=0
+
+while IFS= read -r WORKFLOW_ID; do
+    if [[ -n "$WORKFLOW_ID" ]]; then
+        print_status "Cancelling workflow ID: $WORKFLOW_ID"
+        if gh run cancel "$WORKFLOW_ID" 2>/dev/null; then
+            ((CANCELLED_COUNT++))
+        else
+            print_error "Failed to cancel workflow ID: $WORKFLOW_ID"
+            ((FAILED_COUNT++))
+        fi
+    fi
+done < <(echo "$ALL_WORKFLOWS" | jq -r '.[].databaseId')
+
+echo
+print_status "Summary:"
+echo "  - Cancelled: $CANCELLED_COUNT workflows"
+if [[ $FAILED_COUNT -gt 0 ]]; then
+    echo "  - Failed: $FAILED_COUNT workflows"
+fi
+
+print_status "Done!"
+
+# Optional: Show remaining active workflows
+echo
+print_status "Checking for any remaining active workflows..."
+REMAINING_QUEUED=$(gh run list --status queued --json databaseId --limit 10)
+REMAINING_IN_PROGRESS=$(gh run list --status in_progress --json databaseId --limit 10)
+REMAINING_ALL=$(echo "$REMAINING_QUEUED $REMAINING_IN_PROGRESS" | jq -s 'add | unique_by(.databaseId)')
+
+if [[ "$REMAINING_ALL" == "[]" ]]; then
+    print_status "All workflows successfully cancelled."
+else
+    REMAINING_COUNT=$(echo "$REMAINING_ALL" | jq '. | length')
+    print_warning "Still $REMAINING_COUNT workflows active (may take a moment to update status)"
+fi

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,33 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.15" date="2025-11-13">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
+    </release>
+    <release version="2.7.14" date="2025-11-03">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.14</url>
+    </release>
+    <release version="2.7.13" date="2025-10-11">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.13</url>
+    </release>
+    <release version="2.7.12" date="2025-10-01">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.12</url>
+    </release>
+    <release version="2.7.11" date="2025-09-24">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.11</url>
+    </release>
+    <release version="2.7.10" date="2025-09-18">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.10</url>
+    </release>
+    <release version="2.7.9" date="2025-09-03">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.9</url>
+    </release>
+    <release version="2.7.8" date="2025-08-30">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
+    </release>
+    <release version="2.7.7" date="2025-08-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
+    </release>
     <release version="2.7.6" date="2025-08-12">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
     </release>

bin/platformio-custom.py

@@ -6,6 +6,8 @@ from os.path import join
 import subprocess
 import json
 import re
+import time
+from datetime import datetime
 
 from readprops import readProps
 
@@ -84,7 +86,7 @@ if platform.name == "espressif32":
 
 if platform.name == "nordicnrf52":
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py \"$BUILD_DIR/firmware.hex\" -c -f 0xADA52840 -o \"$BUILD_DIR/firmware.uf2\"",
                                         "Generating UF2 file"))
 
 Import("projenv")
@@ -125,11 +127,16 @@ for pref in userPrefs:
         pref_flags.append("-D" + pref + "=" + env.StringifyMacro(userPrefs[pref]) + "")
 
 # General options that are passed to the C and C++ compilers
+# Calculate unix epoch for current day (midnight)
+current_date = datetime.now().replace(hour=0, minute=0, second=0, microsecond=0)
+build_epoch = int(current_date.timestamp())
+
 flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
         "-DAPP_REPO=" + repo_owner,
+        "-DBUILD_EPOCH=" + str(build_epoch),
     ] + pref_flags
 
 print ("Using flags:")

bin/web.version

@@ -1 +1 @@
-2.6.4
+2.6.7

boards/heltec_mesh_solar.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x0071"]
+    ],
+    "usb_product": "HT-n5262",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_solar",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://heltec.org/project/meshsolar/",
+  "vendor": "Heltec"
+}

boards/heltec_v4.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv",
+      "memory_type": "qio_qspi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "psram_type": "qspi",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_v4"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "heltec_wifi_lora_32 v4 (16 MB FLASH, 2 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 2097152,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/",
+  "vendor": "heltec"
+}

boards/heltec_wireless_tracker_v2.json

@@ -0,0 +1,37 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker_v2"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker V2",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org",
+  "vendor": "Heltec"
+}

boards/r1-neo.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "Muzi R1 Neo",
+    "mcu": "nrf52840",
+    "variant": "r1-neo",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino", "freertos"],
+  "name": "WisCore RAK4631 Board",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://muzi.works/",
+  "vendor": "Muzi Works"
+}

boards/seeed-sensecap-indicator.json

@@ -2,7 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
+      "partitions": "partition-table-8MB.csv",
       "memory_type": "qio_opi"
     },
     "core": "esp32",

boards/unphone.json

@@ -3,7 +3,7 @@
     "arduino": {
       "ldscript": "esp32s3_out.ld",
       "memory_type": "qio_opi",
-      "partitions": "default_8MB.csv"
+      "partitions": "partition-table-8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [

boards/wiscore_rak3172.json

@@ -5,7 +5,7 @@
     },
     "core": "stm32",
     "cpu": "cortex-m4",
-    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_RAK3172_MODULE",
     "f_cpu": "48000000L",
     "mcu": "stm32wle5ccu",
     "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",

debian/changelog

@@ -1,43 +1,31 @@
-meshtasticd (2.7.6.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.15.0) unstable; urgency=medium
+
+  * Version 2.7.15
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 13 Nov 2025 12:31:57 +0000
+
+meshtasticd (2.7.14.0) unstable; urgency=medium
+
+  * Version 2.7.14
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 03 Nov 2025 16:11:31 +0000
+
+meshtasticd (2.7.13.0) unstable; urgency=medium
+
+  * Version 2.7.13
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Sat, 11 Oct 2025 15:27:28 +0000
+
+meshtasticd (2.7.12.0) unstable; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
-  * GitHub Actions Automatic version bump
-  * GitHub Actions Automatic version bump
-  * GitHub Actions Automatic version bump
-  * GitHub Actions Automatic version bump
+  * Version 2.5.19
 
   [  ]
   * GitHub Actions Automatic version bump
 
-  [  ]
-  * GitHub Actions Automatic version bump
+  [ GitHub Actions ]
+  * Version 2.7.12
 
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [ Ubuntu ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
- --  <github-actions[bot]@users.noreply.github.com>  Tue, 12 Aug 2025 23:48:48 +0000
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 01 Oct 2025 19:51:41 +0000

debian/ci_changelog.sh

@@ -1,7 +1,8 @@
 #!/usr/bin/bash
+export DEBFULLNAME="GitHub Actions"
 export DEBEMAIL="github-actions[bot]@users.noreply.github.com"
 PKG_VERSION=$(python3 bin/buildinfo.py short)
 
 dch --newversion "$PKG_VERSION.0" \
-	--distribution UNRELEASED \
-	"GitHub Actions Automatic version bump"
+	--distribution unstable \
+	"Version $PKG_VERSION"

debian/control

@@ -3,6 +3,7 @@ Section: misc
 Priority: optional
 Maintainer: Austin Lane <vidplace7@gmail.com>
 Build-Depends: debhelper-compat (= 13),
+               libc6-dev (>= 2.38) | libbsd-dev,
                lsb-release,
                tar,
                gzip,

debian/meshtasticd.postinst

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 # postinst script for meshtasticd
 #
 # see: dh_installdeb(1)

debian/meshtasticd.postrm

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/bin/sh
 # postrm script for meshtasticd
 #
 # see: dh_installdeb(1)

meshtasticd.spec.rpkg

@@ -33,6 +33,7 @@ BuildRequires: python3dist(grpcio[protobuf])
 BuildRequires: python3dist(grpcio-tools)
 BuildRequires: git-core
 BuildRequires: gcc-c++
+BuildRequires: (glibc-devel >= 2.38) or pkgconfig(libbsd-overlay)
 BuildRequires: pkgconfig(yaml-cpp)
 BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)

partition-table-8MB.csv

@@ -0,0 +1,7 @@
+# This is a layout for 8MB of flash for MUI devices
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x5C0000,
+flashApp, app,  ota_1,   0x5D0000,0x0A0000,
+spiffs,   data, spiffs,  0x670000,0x180000

platformio.ini

@@ -53,14 +53,16 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
-	#-DBUILD_EPOCH=$UNIX_TIME
+	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
 	#-D OLED_PL=1
+	#-D DEBUG_HEAP=1 ; uncomment to add free heap space / memory leak debugging logs
+	#-D DEBUG_LOOP_TIMING=1 ; uncomment to add main loop timing logs
 
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/9573abb64dc9c94f3051348f2bf4fc5cedf03c22.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -68,7 +70,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
-	https://github.com/meshtastic/ArduinoThread/archive/7c3ee9e1951551b949763b1f5280f8db1fa4068d.zip
+	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
 	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
 	nanopb/Nanopb@0.4.91
 	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
@@ -113,18 +115,19 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.2.1
+	# jgromes/RadioLib@7.4.0
+	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/3dc7cf3e233aaa8cc23492cca50541fc099ebfa1.zip
+	https://github.com/meshtastic/device-ui/archive/19b7855e9a1d9deff37391659ca7194e4ef57c43.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.2
+	adafruit/Adafruit BusIO@1.17.4
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
@@ -157,12 +160,12 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
-	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
+	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
+	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
-	dfrobot/DFRobot_RTU@1.0.3
+	dfrobot/DFRobot_RTU@1.0.6
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
@@ -174,9 +177,13 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
 	adafruit/Adafruit LTR390 Library@1.1.2
 	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.5
+	adafruit/Adafruit PCT2075@1.0.6
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
+	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
+	adafruit/Adafruit TSL2561@1.1.2
+	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/BH1750_WE@^1.1.10
+	wollewald/BH1750_WE@^1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]

renovate.json

@@ -8,6 +8,7 @@
     "replacements:all",
     "workarounds:all"
   ],
+  "baseBranchPatterns": ["master"],
   "forkProcessing": "enabled",
   "ignoreDeps": [
     "protobufs"

src/AmbientLightingThread.h

@@ -183,9 +183,9 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
 #endif
             pixels.show();
-            LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+            //        moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+            //        moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
             analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);

src/AudioThread.h

@@ -11,6 +11,11 @@
 #include <AudioOutputI2S.h>
 #include <ESP8266SAM.h>
 
+#ifdef USE_XL9555
+#include "ExtensionIOXL9555.hpp"
+extern ExtensionIOXL9555 io;
+#endif
+
 #define AUDIO_THREAD_INTERVAL_MS 100
 
 class AudioThread : public concurrency::OSThread
@@ -20,12 +25,16 @@ class AudioThread : public concurrency::OSThread
 
     void beginRttl(const void *data, uint32_t len)
     {
+#ifdef T_LORA_PAGER
+        io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+#endif
         setCPUFast(true);
         rtttlFile = new AudioFileSourcePROGMEM(data, len);
         i2sRtttl = new AudioGeneratorRTTTL();
         i2sRtttl->begin(rtttlFile, audioOut);
     }
 
+    // Also handles actually playing the RTTTL, needs to be called in loop
     bool isPlaying()
     {
         if (i2sRtttl != nullptr) {
@@ -45,6 +54,9 @@ class AudioThread : public concurrency::OSThread
         rtttlFile = nullptr;
 
         setCPUFast(false);
+#ifdef T_LORA_PAGER
+        io.digitalWrite(EXPANDS_AMP_EN, LOW);
+#endif
     }
 
     void readAloud(const char *text)
@@ -55,10 +67,16 @@ class AudioThread : public concurrency::OSThread
             i2sRtttl = nullptr;
         }
 
+#ifdef T_LORA_PAGER
+        io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+#endif
         ESP8266SAM *sam = new ESP8266SAM;
         sam->Say(audioOut, text);
         delete sam;
         setCPUFast(false);
+#ifdef T_LORA_PAGER
+        io.digitalWrite(EXPANDS_AMP_EN, LOW);
+#endif
     }
 
   protected:

src/DebugConfiguration.cpp

@@ -146,7 +146,7 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
 {
     int result;
 #ifdef ARCH_PORTDUINO
-    bool utf = !settingsMap[ascii_logs];
+    bool utf = !portduino_config.ascii_logs;
 #else
     bool utf = true;
 #endif

src/DebugConfiguration.h

@@ -2,6 +2,12 @@
 
 #include "configuration.h"
 
+// Forward declarations
+#if defined(DEBUG_HEAP)
+class MemGet;
+extern MemGet memGet;
+#endif
+
 // DEBUG LED
 #ifndef LED_STATE_ON
 #define LED_STATE_ON 1
@@ -23,6 +29,7 @@
 #define MESHTASTIC_LOG_LEVEL_ERROR "ERROR"
 #define MESHTASTIC_LOG_LEVEL_CRIT "CRIT "
 #define MESHTASTIC_LOG_LEVEL_TRACE "TRACE"
+#define MESHTASTIC_LOG_LEVEL_HEAP "HEAP"
 
 #include "SerialConsole.h"
 
@@ -62,6 +69,25 @@
 #endif
 #endif
 
+#if defined(DEBUG_HEAP)
+#define LOG_HEAP(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_HEAP, __VA_ARGS__)
+
+// Macro-based heap debugging
+#define DEBUG_HEAP_BEFORE auto heapBefore = memGet.getFreeHeap();
+#define DEBUG_HEAP_AFTER(context, ptr)                                                                                           \
+    do {                                                                                                                         \
+        auto heapAfter = memGet.getFreeHeap();                                                                                   \
+        if (heapBefore != heapAfter) {                                                                                           \
+            LOG_HEAP("Alloc in %s pointer 0x%x, size: %u, free: %u", context, ptr, heapBefore - heapAfter, heapAfter);           \
+        }                                                                                                                        \
+    } while (0)
+
+#else
+#define LOG_HEAP(...)
+#define DEBUG_HEAP_BEFORE
+#define DEBUG_HEAP_AFTER(context, ptr)
+#endif
+
 /// A C wrapper for LOG_DEBUG that can be used from arduino C libs that don't know about C++ or meshtastic
 extern "C" void logLegacy(const char *level, const char *fmt, ...);
 

src/DisplayFormatters.cpp

@@ -1,7 +1,14 @@
 #include "DisplayFormatters.h"
 
-const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
+                                                         bool usePreset)
 {
+
+    // If use_preset is false, always return "Custom"
+    if (!usePreset) {
+        return "Custom";
+    }
+
     switch (preset) {
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
         return useShortName ? "ShortT" : "ShortTurbo";
@@ -32,3 +39,45 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
         break;
     }
 }
+
+const char *DisplayFormatters::getDeviceRole(meshtastic_Config_DeviceConfig_Role role)
+{
+    switch (role) {
+    case meshtastic_Config_DeviceConfig_Role_CLIENT:
+        return "Client";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE:
+        return "Client Mute";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_CLIENT_HIDDEN:
+        return "Client Hidden";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_CLIENT_BASE:
+        return "Client Base";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_LOST_AND_FOUND:
+        return "Lost and Found";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_TRACKER:
+        return "Tracker";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_SENSOR:
+        return "Sensor";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_TAK:
+        return "TAK";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_TAK_TRACKER:
+        return "TAK Tracker";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_ROUTER:
+        return "Router";
+        break;
+    case meshtastic_Config_DeviceConfig_Role_ROUTER_LATE:
+        return "Router Late";
+        break;
+    default:
+        return "Unknown";
+        break;
+    }
+}

src/DisplayFormatters.h

@@ -4,5 +4,7 @@
 class DisplayFormatters
 {
   public:
-    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
+                                                 bool usePreset);
+    static const char *getDeviceRole(meshtastic_Config_DeviceConfig_Role role);
 };

src/GPSStatus.h

@@ -22,6 +22,9 @@ class GPSStatus : public Status
 
     meshtastic_Position p = meshtastic_Position_init_default;
 
+    /// Time of last valid GPS fix (millis since boot)
+    uint32_t lastFixMillis = 0;
+
   public:
     GPSStatus() { statusType = STATUS_TYPE_GPS; }
 
@@ -83,6 +86,9 @@ class GPSStatus : public Status
 
     uint32_t getNumSatellites() const { return p.sats_in_view; }
 
+    /// Return millis() when the last GPS fix occurred (0 = never)
+    uint32_t getLastFixMillis() const { return lastFixMillis; }
+
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_DEBUG
@@ -114,6 +120,9 @@ class GPSStatus : public Status
 
         if (isDirty) {
             if (hasLock) {
+                // Record time of last valid GPS fix
+                lastFixMillis = millis();
+
                 // In debug logs, identify position by @timestamp:stage (stage 3 = notify)
                 LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,

src/NodeStatus.h

@@ -14,16 +14,16 @@ class NodeStatus : public Status
     CallbackObserver<NodeStatus, const NodeStatus *> statusObserver =
         CallbackObserver<NodeStatus, const NodeStatus *>(this, &NodeStatus::updateStatus);
 
-    uint8_t numOnline = 0;
-    uint8_t numTotal = 0;
+    uint16_t numOnline = 0;
+    uint16_t numTotal = 0;
 
-    uint8_t lastNumTotal = 0;
+    uint16_t lastNumTotal = 0;
 
   public:
     bool forceUpdate = false;
 
     NodeStatus() { statusType = STATUS_TYPE_NODE; }
-    NodeStatus(uint8_t numOnline, uint8_t numTotal, bool forceUpdate = false) : Status()
+    NodeStatus(uint16_t numOnline, uint16_t numTotal, bool forceUpdate = false) : Status()
     {
         this->forceUpdate = forceUpdate;
         this->numOnline = numOnline;
@@ -34,11 +34,11 @@ class NodeStatus : public Status
 
     void observe(Observable<const NodeStatus *> *source) { statusObserver.observe(source); }
 
-    uint8_t getNumOnline() const { return numOnline; }
+    uint16_t getNumOnline() const { return numOnline; }
 
-    uint8_t getNumTotal() const { return numTotal; }
+    uint16_t getNumTotal() const { return numTotal; }
 
-    uint8_t getLastNumTotal() const { return lastNumTotal; }
+    uint16_t getLastNumTotal() const { return lastNumTotal; }
 
     bool matches(const NodeStatus *newStatus) const
     {
@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %u online, %u total", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -128,6 +128,7 @@ RAK9154Sensor rak9154Sensor;
 #ifdef HAS_PPM
 // note: XPOWERS_CHIP_XXX must be defined in variant.h
 #include <XPowersLib.h>
+XPowersPPM *PPM = NULL;
 #endif
 
 #ifdef HAS_BQ27220
@@ -193,7 +194,7 @@ static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level se
 
 #ifdef BATTERY_PIN
 
-static void adcEnable()
+void battery_adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -213,7 +214,7 @@ static void adcEnable()
 #endif
 }
 
-static void adcDisable()
+static void battery_adcDisable()
 {
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -319,7 +320,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             uint32_t raw = 0;
             float scaled = 0;
 
-            adcEnable();
+            battery_adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
@@ -331,7 +332,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
-            adcDisable();
+            battery_adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -561,6 +562,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                    config.power.device_battery_ina_address) {
             if (!ina226Sensor.isInitialized())
                 return ina226Sensor.runOnce() > 0;
+            return ina226Sensor.isRunning();
         } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
                    config.power.device_battery_ina_address) {
             if (!ina260Sensor.isInitialized())
@@ -681,6 +683,8 @@ bool Power::setup()
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
+    } else if (meshSolarInit()) {
+        found = true;
     } else if (analogInit()) {
         found = true;
     }
@@ -688,6 +692,16 @@ bool Power::setup()
 #ifdef NRF_APM
     found = true;
 #endif
+#ifdef EXT_PWR_DETECT
+    attachInterrupt(
+        EXT_PWR_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
+#endif
 
     enabled = found;
     low_voltage_counter = 0;
@@ -743,7 +757,11 @@ void Power::shutdown()
 
 #if HAS_SCREEN
     if (screen) {
+#ifdef T_DECK_PRO
+        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
+#else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
+#endif
     }
 #endif
 #if !defined(ARCH_STM32WL)
@@ -761,7 +779,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false, true);
+    doDeepSleep(DELAY_FOREVER, true, true);
 #elif defined(ARCH_PORTDUINO)
     exit(EXIT_SUCCESS);
 #else
@@ -821,22 +839,34 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
-    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
-              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+    if (millis() > lastLogTime + 50 * 1000) {
+        LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(),
+                  powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+        lastLogTime = millis();
+    }
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        std::string threadlist = "Threads running:";
+        // Use stack-allocated buffer to avoid heap allocations in monitoring code
+        char threadlist[256] = "Threads running:";
+        int threadlistLen = strlen(threadlist);
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                threadlist += vformat(" %s", thread->ThreadName.c_str());
+                // Use snprintf to safely append to stack buffer without heap allocation
+                int remaining = sizeof(threadlist) - threadlistLen - 1;
+                if (remaining > 0) {
+                    int written = snprintf(threadlist + threadlistLen, remaining, " %s", thread->ThreadName.c_str());
+                    if (written > 0 && written < remaining) {
+                        threadlistLen += written;
+                    }
+                }
                 running++;
             }
         }
-        LOG_DEBUG(threadlist.c_str());
-        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
+        LOG_HEAP(threadlist);
+        LOG_HEAP("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
                  memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
     }
@@ -849,15 +879,19 @@ void Power::readPowerStatus()
         sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
         auto newHeap = memGet.getFreeHeap();
-        std::string heapTopic =
-            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
-        std::string heapString = std::to_string(newHeap);
-        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
+        // Use stack-allocated buffers to avoid heap allocations in monitoring code
+        char heapTopic[128];
+        snprintf(heapTopic, sizeof(heapTopic), "%s/2/heap/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
+        char heapString[16];
+        snprintf(heapString, sizeof(heapString), "%u", newHeap);
+        mqtt->pubSub.publish(heapTopic, heapString, false);
+
         auto wifiRSSI = WiFi.RSSI();
-        std::string wifiTopic =
-            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
-        std::string wifiString = std::to_string(wifiRSSI);
-        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
+        char wifiTopic[128];
+        snprintf(wifiTopic, sizeof(wifiTopic), "%s/2/wifi/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
+        char wifiString[16];
+        snprintf(wifiString, sizeof(wifiString), "%d", wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic, wifiString, false);
     }
 #endif
 
@@ -872,13 +906,8 @@ void Power::readPowerStatus()
             low_voltage_counter++;
             LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
             if (low_voltage_counter > 10) {
-#ifdef ARCH_NRF52
-                // We can't trigger deep sleep on NRF52, it's freezing the board
-                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
-#else
                 LOG_INFO("Low voltage detected, trigger deep sleep");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
-#endif
             }
         } else {
             low_voltage_counter = 0;
@@ -1318,7 +1347,6 @@ bool Power::lipoInit()
 class LipoCharger : public HasBatteryLevel
 {
   private:
-    XPowersPPM *ppm = nullptr;
     BQ27220 *bq = nullptr;
 
   public:
@@ -1327,41 +1355,41 @@ class LipoCharger : public HasBatteryLevel
      */
     bool runOnce()
     {
-        if (ppm == nullptr) {
-            ppm = new XPowersPPM;
-            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
+        if (PPM == nullptr) {
+            PPM = new XPowersPPM;
+            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
             if (result) {
                 LOG_INFO("PPM BQ25896 init succeeded");
                 // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // ppm->setSysPowerDownVoltage(3100);
+                // PPM->setSysPowerDownVoltage(3100);
 
                 // Set input current limit, default is 500mA
-                // ppm->setInputCurrentLimit(800);
+                // PPM->setInputCurrentLimit(800);
 
                 // Disable current limit pin
-                // ppm->disableCurrentLimitPin();
+                // PPM->disableCurrentLimitPin();
 
                 // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                ppm->setChargeTargetVoltage(4288);
+                PPM->setChargeTargetVoltage(4288);
 
                 // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // ppm->setPrechargeCurr(64);
+                // PPM->setPrechargeCurr(64);
 
                 // The premise is that limit pin is disabled, or it will
                 // only follow the maximum charging current set by limit pin.
                 // Set the charging current , Range:0~5056mA ,step:64mA
-                ppm->setChargerConstantCurr(1024);
+                PPM->setChargerConstantCurr(1024);
 
                 // To obtain voltage data, the ADC must be enabled first
-                ppm->enableMeasure();
+                PPM->enableMeasure();
 
                 // Turn on charging function
                 // If there is no battery connected, do not turn on the charging function
-                ppm->enableCharge();
+                PPM->enableCharge();
             } else {
                 LOG_WARN("PPM BQ25896 init failed");
-                delete ppm;
-                ppm = nullptr;
+                delete PPM;
+                PPM = nullptr;
                 return false;
             }
         }
@@ -1402,23 +1430,23 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
+    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
 
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
+    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
      */
     virtual bool isCharging() override
     {
-        bool isCharging = ppm->isCharging();
+        bool isCharging = PPM->isCharging();
         if (isCharging) {
             LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
         } else {
-            if (!ppm->isVbusIn()) {
+            if (!PPM->isVbusIn()) {
                 LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
             }
         }
@@ -1450,3 +1478,73 @@ bool Power::lipoChargerInit()
     return false;
 }
 #endif
+
+#ifdef HELTEC_MESH_SOLAR
+#include "meshSolarApp.h"
+
+/**
+ * meshSolar class for an SMBUS battery sensor.
+ */
+class meshSolarBatteryLevel : public HasBatteryLevel
+{
+
+  public:
+    /**
+     * Init the I2C meshSolar battery level sensor
+     */
+    bool runOnce()
+    {
+        meshSolarStart();
+        return true;
+    }
+
+    /**
+     * Battery state of charge, from 0 to 100 or -1 for unknown
+     */
+    virtual int getBatteryPercent() override { return meshSolarGetBatteryPercent(); }
+
+    /**
+     * The raw voltage of the battery in millivolts, or NAN if unknown
+     */
+    virtual uint16_t getBattVoltage() override { return meshSolarGetBattVoltage(); }
+
+    /**
+     * return true if there is a battery installed in this unit
+     */
+    virtual bool isBatteryConnect() override { return meshSolarIsBatteryConnect(); }
+
+    /**
+     * return true if there is an external power source detected
+     */
+    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
+
+    /**
+     * return true if the battery is currently charging
+     */
+    virtual bool isCharging() override { return meshSolarIsCharging(); }
+};
+
+meshSolarBatteryLevel meshSolarLevel;
+
+/**
+ * Init the meshSolar battery level sensor
+ */
+bool Power::meshSolarInit()
+{
+    bool result = meshSolarLevel.runOnce();
+    LOG_DEBUG("Power::meshSolarInit mesh solar sensor is %s", result ? "ready" : "not ready yet");
+    if (!result)
+        return false;
+    batteryLevel = &meshSolarLevel;
+    return true;
+}
+
+#else
+/**
+ * The meshSolar battery level sensor is unavailable - default to AnalogBatteryLevel
+ */
+bool Power::meshSolarInit()
+{
+    return false;
+}
+#endif

src/RedirectablePrint.cpp

@@ -4,6 +4,7 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 #include "main.h"
+#include "memGet.h"
 #include "mesh/generated/meshtastic/mesh.pb.h"
 #include <assert.h>
 #include <cstring>
@@ -57,7 +58,7 @@ size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_l
 #endif
 
 #ifdef ARCH_PORTDUINO
-    bool color = !settingsMap[ascii_logs];
+    bool color = !portduino_config.ascii_logs;
 #else
     bool color = true;
 #endif
@@ -99,7 +100,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
     size_t r = 0;
 
 #ifdef ARCH_PORTDUINO
-    bool color = !settingsMap[ascii_logs];
+    bool color = !portduino_config.ascii_logs;
 #else
     bool color = true;
 #endif
@@ -166,6 +167,16 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         print(thread->ThreadName);
         print("] ");
     }
+
+#ifdef DEBUG_HEAP
+    // Add heap free space bytes prefix before every log message
+#ifdef ARCH_PORTDUINO
+    ::printf("[heap %u] ", memGet.getFreeHeap());
+#else
+    printf("[heap %u] ", memGet.getFreeHeap());
+#endif
+#endif // DEBUG_HEAP
+
     r += vprintf(logLevel, format, arg);
 }
 
@@ -288,7 +299,7 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #if ARCH_PORTDUINO
     // level trace is special, two possible ways to handle it.
     if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
-        if (settingsStrings[traceFilename] != "") {
+        if (portduino_config.traceFilename != "") {
             va_list arg;
             va_start(arg, format);
             try {
@@ -297,18 +308,18 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
             }
             va_end(arg);
         }
-        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
+        if (portduino_config.logoutputlevel < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
             delete[] newFormat;
             return;
         }
     }
-    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+    if (portduino_config.logoutputlevel < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
         delete[] newFormat;
         return;
-    } else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
+    } else if (portduino_config.logoutputlevel < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
         delete[] newFormat;
         return;
-    } else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
+    } else if (portduino_config.logoutputlevel < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
         delete[] newFormat;
         return;
     }

src/SerialConsole.cpp

@@ -6,6 +6,14 @@
 #include "configuration.h"
 #include "time.h"
 
+#if defined(ARDUINO_USB_CDC_ON_BOOT) && ARDUINO_USB_CDC_ON_BOOT
+#define IS_USB_SERIAL
+#ifdef SERIAL_HAS_ON_RECEIVE
+#undef SERIAL_HAS_ON_RECEIVE
+#endif
+#include "HWCDC.h"
+#endif
+
 #ifdef RP2040_SLOW_CLOCK
 #define Port Serial2
 #else
@@ -22,7 +30,12 @@ SerialConsole *console;
 
 void consoleInit()
 {
-    new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
+    auto sc = new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
+
+#if defined(SERIAL_HAS_ON_RECEIVE)
+    // onReceive does only exist for HardwareSerial not for USB CDC serial
+    Port.onReceive([sc]() { sc->rxInt(); });
+#endif
     DEBUG_PORT.rpInit(); // Simply sets up semaphore
 }
 
@@ -37,6 +50,7 @@ void consolePrintf(const char *format, ...)
 
 SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), concurrency::OSThread("SerialConsole")
 {
+    api_type = TYPE_SERIAL;
     assert(!console);
     console = this;
     canWrite = false; // We don't send packets to our port until it has talked to us first
@@ -64,7 +78,22 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
 
 int32_t SerialConsole::runOnce()
 {
-    return runOncePart();
+#ifdef HELTEC_MESH_SOLAR
+    // After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
+    if (moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port &&
+        moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG) {
+        return 250;
+    }
+#endif
+
+    int32_t delay = runOncePart();
+#if defined(SERIAL_HAS_ON_RECEIVE) || defined(CONFIG_IDF_TARGET_ESP32S2)
+    return Port.available() ? delay : INT32_MAX;
+#elif defined(IS_USB_SERIAL)
+    return HWCDC::isPlugged() ? delay : (1000 * 20);
+#else
+    return delay;
+#endif
 }
 
 void SerialConsole::flush()
@@ -72,6 +101,18 @@ void SerialConsole::flush()
     Port.flush();
 }
 
+// trigger tx of serial data
+void SerialConsole::onNowHasData(uint32_t fromRadioNum)
+{
+    setIntervalFromNow(0);
+}
+
+// trigger rx of serial data
+void SerialConsole::rxInt()
+{
+    setIntervalFromNow(0);
+}
+
 // For the serial port we can't really detect if any client is on the other side, so instead just look for recent messages
 bool SerialConsole::checkIsConnected()
 {

src/SerialConsole.h

@@ -32,11 +32,14 @@ class SerialConsole : public StreamAPI, public RedirectablePrint, private concur
     virtual int32_t runOnce() override;
 
     void flush();
+    void rxInt();
 
   protected:
     /// Check the current underlying physical link to see if the client is currently connected
     virtual bool checkIsConnected() override;
 
+    virtual void onNowHasData(uint32_t fromRadioNum) override;
+
     /// Possibly switch to protobufs if we see a valid protobuf message
     virtual void log_to_serial(const char *logLevel, const char *format, va_list arg);
 };

src/buzz/BuzzerFeedbackThread.cpp

@@ -5,7 +5,7 @@
 
 BuzzerFeedbackThread *buzzerFeedbackThread;
 
-BuzzerFeedbackThread::BuzzerFeedbackThread() : OSThread("BuzzerFeedback")
+BuzzerFeedbackThread::BuzzerFeedbackThread()
 {
     if (inputBroker)
         inputObserver.observe(inputBroker);
@@ -15,14 +15,11 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
 {
     // Only provide feedback if buzzer is enabled for notifications
     if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DISABLED ||
-        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY) {
+        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_NOTIFICATIONS_ONLY ||
+        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY) {
         return 0; // Let other handlers process the event
     }
 
-    // Track last event time for potential future use
-    lastEventTime = millis();
-    needsUpdate = true;
-
     // Handle different input events with appropriate buzzer feedback
     switch (event->inputEvent) {
     case INPUT_BROKER_USER_PRESS:
@@ -33,7 +30,9 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
         break;
 
     case INPUT_BROKER_UP:
+    case INPUT_BROKER_UP_LONG:
     case INPUT_BROKER_DOWN:
+    case INPUT_BROKER_DOWN_LONG:
     case INPUT_BROKER_LEFT:
     case INPUT_BROKER_RIGHT:
         playChirp(); // Navigation feedback
@@ -60,14 +59,3 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
 
     return 0; // Allow other handlers to process the event
 }
-
-int32_t BuzzerFeedbackThread::runOnce()
-{
-    // This thread is primarily event-driven, but we can use runOnce
-    // for any periodic tasks if needed in the future
-
-    needsUpdate = false;
-
-    // Run every 100ms when active, less frequently when idle
-    return needsUpdate ? 100 : 1000;
-}

src/buzz/BuzzerFeedbackThread.h

@@ -4,7 +4,7 @@
 #include "concurrency/OSThread.h"
 #include "input/InputBroker.h"
 
-class BuzzerFeedbackThread : public concurrency::OSThread
+class BuzzerFeedbackThread
 {
     CallbackObserver<BuzzerFeedbackThread, const InputEvent *> inputObserver =
         CallbackObserver<BuzzerFeedbackThread, const InputEvent *>(this, &BuzzerFeedbackThread::handleInputEvent);
@@ -12,13 +12,6 @@ class BuzzerFeedbackThread : public concurrency::OSThread
   public:
     BuzzerFeedbackThread();
     int handleInputEvent(const InputEvent *event);
-
-  protected:
-    virtual int32_t runOnce() override;
-
-  private:
-    uint32_t lastEventTime = 0;
-    bool needsUpdate = false;
 };
 
 extern BuzzerFeedbackThread *buzzerFeedbackThread;

src/concurrency/OSThread.cpp

@@ -86,11 +86,13 @@ void OSThread::run()
 #ifdef DEBUG_HEAP
     auto newHeap = memGet.getFreeHeap();
     if (newHeap < heap)
-        LOG_DEBUG("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_HEAP("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
     if (heap < newHeap)
-        LOG_DEBUG("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_HEAP("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+#endif
+#ifdef DEBUG_LOOP_TIMING
+    LOG_DEBUG("====== Thread next run in: %d", newDelay);
 #endif
-
     runned();
 
     if (newDelay >= 0)

src/configuration.h

@@ -26,13 +26,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#ifdef RV3028_RTC
+#if __has_include("Melopero_RV3028.h")
 #include "Melopero_RV3028.h"
 #endif
-#ifdef PCF8563_RTC
+#if __has_include("pcf8563.h")
 #include "pcf8563.h"
 #endif
 
+/* Offer chance for variant-specific defines */
+#include "variant.h"
+
 // -----------------------------------------------------------------------------
 // Version
 // -----------------------------------------------------------------------------
@@ -117,6 +120,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SX126X_MAX_POWER 22
 #endif
 
+#ifdef USE_GC1109_PA
+// Power Amps are often non-linear, so we can use an array of values for the power curve
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
+#endif
+
+#ifdef RAK13302
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
+#endif
+
 // Default system gain to 0 if not defined
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
@@ -135,7 +149,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // OLED & Input
 // -----------------------------------------------------------------------------
-#if defined(SEEED_WIO_TRACKER_L1)
+#if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
 #define SSD1306_ADDRESS 0x3D
 #define USE_SH1106
 #else
@@ -214,6 +228,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ICM20948_ADDR_ALT 0x68
 #define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
+#define DA217_ADDR 0x26
 
 // -----------------------------------------------------------------------------
 // LED
@@ -236,6 +251,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
 #define CST328_ADDR 0x1A
+#define CHSC6X_ADDR 0x2E
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -254,14 +270,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // convert 24-bit color to 16-bit (56K)
 #define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
 
-/* Step #1: offer chance for variant-specific defines */
-#include "variant.h"
-
 #if defined(VEXT_ENABLE) && !defined(VEXT_ON_VALUE)
 // Older variant.h files might not be defining this value, so stay with the old default
 #define VEXT_ON_VALUE LOW
 #endif
 
+// -----------------------------------------------------------------------------
+// Rotary encoder
+// -----------------------------------------------------------------------------
+#ifndef ROTARY_DELAY
+#define ROTARY_DELAY 5
+#endif
+
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------

src/detect/ScanI2C.cpp

@@ -25,8 +25,8 @@ ScanI2C::FoundDevice ScanI2C::firstScreen() const
 
 ScanI2C::FoundDevice ScanI2C::firstRTC() const
 {
-    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563};
-    return firstOfOrNONE(2, types);
+    ScanI2C::DeviceType types[] = {RTC_RV3028, RTC_PCF8563, RTC_RX8130CE};
+    return firstOfOrNONE(3, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const

src/detect/ScanI2C.h

@@ -14,6 +14,7 @@ class ScanI2C
         SCREEN_ST7567,
         RTC_RV3028,
         RTC_PCF8563,
+        RTC_RX8130CE,
         CARDKB,
         TDECKKB,
         BBQ10KB,
@@ -79,7 +80,12 @@ class ScanI2C
         BQ27220,
         LTR553ALS,
         BHI260AP,
-        BMM150
+        BMM150,
+        TSL2561,
+        DRV2605,
+        BH1750,
+        DA217,
+        CHSC6X
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CConsumer.cpp

@@ -0,0 +1,16 @@
+#include "ScanI2CConsumer.h"
+#include <forward_list>
+
+static std::forward_list<ScanI2CConsumer *> ScanI2CConsumers;
+
+ScanI2CConsumer::ScanI2CConsumer()
+{
+    ScanI2CConsumers.push_front(this);
+}
+
+void ScanI2CCompleted(ScanI2C *i2cScanner)
+{
+    for (ScanI2CConsumer *consumer : ScanI2CConsumers) {
+        consumer->i2cScanFinished(i2cScanner);
+    }
+}

src/detect/ScanI2CConsumer.h

@@ -0,0 +1,13 @@
+#pragma once
+
+#include "ScanI2C.h"
+#include <stddef.h>
+
+class ScanI2CConsumer
+{
+  public:
+    ScanI2CConsumer();
+    virtual void i2cScanFinished(ScanI2C *i2cScanner) = 0;
+};
+
+void ScanI2CCompleted(ScanI2C *i2cScanner);

src/detect/ScanI2CTwoWire.cpp

@@ -106,6 +106,7 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
         if (i2cBus->available())
             i2cBus->read();
     }
+    LOG_DEBUG("Register value: 0x%x", value);
     return value;
 }
 
@@ -197,6 +198,9 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #ifdef PCF8563_RTC
                 SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563", (uint8_t)addr.address)
 #endif
+#ifdef RX8130CE_RTC
+                SCAN_SIMPLE_CASE(RX8130CE_RTC, RTC_RX8130CE, "RX8130CE", (uint8_t)addr.address)
+#endif
 
             case CARDKB_ADDR:
                 // Do we have the RAK14006 instead?
@@ -294,6 +298,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = AHT10;
                 break;
 #endif
+#if !defined(M5STACK_UNITC6L)
             case INA_ADDR:
             case INA_ADDR_ALTERNATE:
             case INA_ADDR_WAVESHARE_UPS:
@@ -340,6 +345,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     // else: probably a RAK12500/UBLOX GPS on I2C
                 }
                 break;
+#endif
             case MCP9808_ADDR:
                 // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some
                 // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips.
@@ -372,13 +378,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
-                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c || registerValue == 0xc8d) {
-                    type = SHT4X;
-                    logFoundDevice("SHT4X", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
+                if (registerValue == 0x5449) {
                     type = OPT3001;
                     logFoundDevice("OPT3001", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
+                    type = SHT4X;
+                    logFoundDevice("SHT4X", (uint8_t)addr.address);
                 } else {
                     type = SHT31;
                     logFoundDevice("SHT31", (uint8_t)addr.address);
@@ -459,9 +465,34 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
+            case TCA9555_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
+                if (registerValue == 0x13) {
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
+                    if (registerValue == 0x81) {
+                        type = DA217;
+                        logFoundDevice("DA217", (uint8_t)addr.address);
+                    } else {
+                        type = TCA9555;
+                        logFoundDevice("TCA9555", (uint8_t)addr.address);
+                    }
+                } else {
+                    type = TCA9555;
+                    logFoundDevice("TCA9555", (uint8_t)addr.address);
+                }
+                break;
+            case TSL25911_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
+                if (registerValue == 0x50) {
+                    type = TSL2591;
+                    logFoundDevice("TSL25911", (uint8_t)addr.address);
+                } else {
+                    type = TSL2561;
+                    logFoundDevice("TSL2561", (uint8_t)addr.address);
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);
@@ -469,7 +500,26 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
+            case LTR553ALS_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
+                if (registerValue == 0x92) {                                                       // LTR553ALS Part ID
+                    type = LTR553ALS;
+                    logFoundDevice("LTR553ALS", (uint8_t)addr.address);
+                } else {
+                    // Test BH1750 - send power on command
+                    i2cBus->beginTransmission(addr.address);
+                    i2cBus->write(0x01); // Power On command
+                    uint8_t bh1750_error = i2cBus->endTransmission();
+                    if (bh1750_error == 0) {
+                        type = BH1750;
+                        logFoundDevice("BH1750", (uint8_t)addr.address);
+                    } else {
+                        LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address);
+                    }
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
@@ -482,10 +532,16 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 if (registerValue == 0x5a) {
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
+                } else {
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // DRV2605_REG_STATUS
+                    if (registerValue == 0xe0) {
+                        type = DRV2605;
+                        logFoundDevice("DRV2605", (uint8_t)addr.address);
                     } else {
                         type = MPR121KB;
                         logFoundDevice("MPR121KB", (uint8_t)addr.address);
                     }
+                }
                 break;
 
             case ICM20948_ADDR:     // same as BMX160_ADDR
@@ -559,7 +615,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
     scanPort(port, nullptr, 0);
 }
 
-TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
+TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address)
 {
     if (address.port == ScanI2C::I2CPort::WIRE) {
         return &Wire;

src/detect/ScanI2CTwoWire.h

@@ -23,12 +23,12 @@ class ScanI2CTwoWire : public ScanI2C
 
     ScanI2C::FoundDevice find(ScanI2C::DeviceType) const override;
 
-    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
-
     bool exists(ScanI2C::DeviceType) const override;
 
     size_t countDevices() const override;
 
+    static TwoWire *fetchI2CBus(ScanI2C::DeviceAddress);
+
   protected:
     FoundDevice firstOfOrNONE(size_t, DeviceType[]) const override;
 

src/gps/GPS.cpp

@@ -1,5 +1,4 @@
 #include <cstring> // Include for strstr
-#include <string>
 #include <vector>
 
 #include "configuration.h"
@@ -241,6 +240,9 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
             buffer[bytesRead] = b;
             bytesRead++;
             if ((bytesRead == 767) || (b == '\r')) {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(debugmsg.c_str());
+#endif
                 if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
 #ifdef GPS_DEBUG
                     LOG_DEBUG("Found: %s", message); // Log the found message
@@ -248,9 +250,6 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
                     return GNSS_RESPONSE_OK;
                 } else {
                     bytesRead = 0;
-#ifdef GPS_DEBUG
-                    LOG_DEBUG(debugmsg.c_str());
-#endif
                 }
             }
         }
@@ -495,38 +494,27 @@ bool GPS::setup()
     if (!didSerialInit) {
         int msglen = 0;
         if (tx_gpio && gnssModel == GNSS_MODEL_UNKNOWN) {
-#ifdef TRACKER_T1000_E
-            // add power up/down strategy, improve ag3335 detection success
-            digitalWrite(PIN_GPS_EN, LOW);
-            delay(500);
-            digitalWrite(GPS_VRTC_EN, LOW);
-            delay(1000);
-            digitalWrite(GPS_VRTC_EN, HIGH);
-            delay(500);
-            digitalWrite(PIN_GPS_EN, HIGH);
-            delay(1000);
-#endif
             if (probeTries < GPS_PROBETRIES) {
-                LOG_DEBUG("Probe for GPS at %d", serialSpeeds[speedSelect]);
                 gnssModel = probe(serialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (++speedSelect == array_count(serialSpeeds)) {
+                    if (currentStep == 0 && ++speedSelect == array_count(serialSpeeds)) {
                         speedSelect = 0;
                         ++probeTries;
                     }
                 }
             }
             // Rare Serial Speeds
+#ifndef CONFIG_IDF_TARGET_ESP32C6
             if (probeTries == GPS_PROBETRIES) {
-                LOG_DEBUG("Probe for GPS at %d", rareSerialSpeeds[speedSelect]);
                 gnssModel = probe(rareSerialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (++speedSelect == array_count(rareSerialSpeeds)) {
+                    if (currentStep == 0 && ++speedSelect == array_count(rareSerialSpeeds)) {
                         LOG_WARN("Give up on GPS probe and set to %d", GPS_BAUDRATE);
                         return true;
                     }
                 }
             }
+#endif
         }
 
         if (gnssModel != GNSS_MODEL_UNKNOWN) {
@@ -808,6 +796,14 @@ bool GPS::setup()
             } else {
                 LOG_INFO("GNSS module configuration saved!");
             }
+        } else if (gnssModel == GNSS_MODEL_CM121) {
+            // only ask for RMC and GGA
+            // enable GGA
+            _serial_gps->write("$CFGMSG,0,0,1,1*1B\r\n");
+            delay(250);
+            // enable RMC
+            _serial_gps->write("$CFGMSG,0,4,1,1*1F\r\n");
+            delay(250);
         }
         didSerialInit = true;
     }
@@ -843,9 +839,6 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         setPowerPMU(true);                                        // Power (PMU): on
         writePinStandby(false);                                   // Standby (pin): awake (not standby)
         setPowerUBLOX(true);                                      // Standby (UBLOX): awake
-#ifdef GNSS_AIROHA
-        lastFixStartMsec = 0;
-#endif
         break;
 
     case GPS_SOFTSLEEP:
@@ -863,9 +856,7 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep (not awake)
         setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
 #ifdef GNSS_AIROHA
-        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
         digitalWrite(PIN_GPS_EN, LOW);
-        }
 #endif
         break;
 
@@ -877,9 +868,7 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep
         setPowerUBLOX(false, 0);                                    // Standby (UBLOX): asleep, indefinitely
 #ifdef GNSS_AIROHA
-        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
         digitalWrite(PIN_GPS_EN, LOW);
-        }
 #endif
         break;
     }
@@ -1031,7 +1020,7 @@ void GPS::down()
     LOG_DEBUG("%us until next search", sleepTime / 1000);
 
     // If update interval less than 10 seconds, no attempt to sleep
-    if (updateInterval <= 10 * 1000UL || sleepTime == 0)
+    if (updateInterval <= GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS || sleepTime == 0)
         setPowerState(GPS_IDLE);
 
     else {
@@ -1062,6 +1051,8 @@ void GPS::down()
         }
         // If update interval long enough (or softsleep unsupported): hardsleep instead
         setPowerState(GPS_HARDSLEEP, sleepTime);
+        // Reset the fix quality to 0, since we're off.
+        fixQual = 0;
     }
 }
 
@@ -1090,7 +1081,7 @@ int32_t GPS::runOnce()
             return disable();
         }
         if (!setup())
-            return 2000; // Setup failed, re-run in two seconds
+            return currentDelay; // Setup failed, re-run in two seconds
 
         // We have now loaded our saved preferences from flash
         if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
@@ -1100,11 +1091,29 @@ int32_t GPS::runOnce()
         publishUpdate();
     }
 
-    // Repeaters have no need for GPS
-    if (config.device.role == meshtastic_Config_DeviceConfig_Role_REPEATER) {
-        return disable();
-    }
-
+    // ======================== GPS_ACTIVE state ========================
+    // In GPS_ACTIVE state, GPS is powered on and we're receiving NMEA messages.
+    // We use the following logic to determine when to update the local position
+    // or time by running GPS::publishUpdate.
+    // Note: Local position update is asynchronous to position broadcast. We
+    // generally run this state every gps_update_interval seconds, and in most cases
+    // gps_update_interval is faster than the position broadcast interval so there's a
+    // fresh position ready when the device wants to broadcast one on the mesh.
+    //
+    // 1. Got a time for the first time --> set the time, don't publish.
+    // 2. Got a lock for the first time
+    //   --> If gps_update_interval is <= 10s --> publishUpdate
+    //   --> Otherwise, hold for MIN(gps_update_interval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS, 20s)
+    //  3. Got a lock after turning back on
+    //   --> If gps_update_interval is <= 10s --> publishUpdate
+    //   --> Otherwise, hold for MIN(gps_update_interval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS, 20s)
+    // 4. Hold has expired
+    //   --> If we have a time and a location --> publishUpdate
+    //   --> down()
+    // 5. Search time has expired
+    //   --> If we have a time and a location --> publishUpdate
+    //   --> If we had a location before but don't now --> publishUpdate
+    //   --> down()
     if (whileActive()) {
         // if we have received valid NMEA claim we are connected
         setConnected();
@@ -1114,42 +1123,81 @@ int32_t GPS::runOnce()
     if (!config.position.fixed_position && powerState != GPS_ACTIVE && scheduling.isUpdateDue())
         up();
 
-    // If we've already set time from the GPS, no need to ask the GPS
+    // quality of the previous fix. We set it to 0 when we go down, so it's a way
+    // to check if we're getting a lock after being GPS_OFF.
+    uint8_t prev_fixQual = fixQual;
+
+    if (powerState == GPS_ACTIVE) {
+        // if gps_update_interval is <=10s, GPS never goes off, so we treat that differently
+        uint32_t updateInterval = Default::getConfiguredOrDefaultMs(config.position.gps_update_interval);
+
+        // 1. Got a time for the first time
         bool gotTime = (getRTCQuality() >= RTCQualityGPS);
         if (!gotTime && lookForTime()) { // Note: we count on this && short-circuiting and not resetting the RTC time
             gotTime = true;
-        shouldPublish = true;
         }
 
+        // 2. Got a lock for the first time, or 3. Got a lock after turning back on
         bool gotLoc = lookForLocation();
-    if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
+        if (gotLoc) {
+#ifdef GPS_DEBUG
+            if (!hasValidLocation) { // declare that we have location ASAP
                 LOG_DEBUG("hasValidLocation RISING EDGE");
+            }
+#endif
+            if (updateInterval <= GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS) {
                 hasValidLocation = true;
                 shouldPublish = true;
+            } else if (!hasValidLocation || prev_fixQual == 0 || (fixHoldEnds + GPS_THREAD_INTERVAL) < millis()) {
+                hasValidLocation = true;
+                // Hold for up to 20secs after getting a lock to download ephemeris etc
+                uint32_t holdTime = updateInterval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS;
+                if (holdTime > GPS_FIX_HOLD_MAX_MS)
+                    holdTime = GPS_FIX_HOLD_MAX_MS;
+                fixHoldEnds = millis() + holdTime;
+#ifdef GPS_DEBUG
+                LOG_DEBUG("Holding for %ums after lock", holdTime);
+#endif
+            }
         }
 
         bool tooLong = scheduling.searchedTooLong();
-    if (tooLong)
+        if (tooLong && !gotLoc) {
             LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time");
-
-    // Once we get a location we no longer desperately want an update
-    if ((gotLoc && gotTime) || tooLong) {
-
-        if (tooLong) {
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
-                LOG_DEBUG("hasValidLocation FALLING EDGE");
-            }
                 p = meshtastic_Position_init_default;
                 hasValidLocation = false;
+                shouldPublish = true;
+#ifdef GPS_DEBUG
+                LOG_DEBUG("hasValidLocation FALLING EDGE");
+#endif
+            }
         }
 
-        down();
-        shouldPublish = true; // publish our update for this just finished acquisition window
+        // Hold has expired , Search time has expired, we got a time only, or we never needed to hold.
+        bool holdExpired = (fixHoldEnds != 0 && millis() > fixHoldEnds);
+        if (shouldPublish || tooLong || holdExpired) {
+            if (gotTime && hasValidLocation) {
+                shouldPublish = true;
             }
-
-    // If state has changed do a publish
+            if (shouldPublish) {
+                fixHoldEnds = 0;
                 publishUpdate();
+            }
+
+            // There's a chance we just got a time, so keep going to see if we can get a location too
+            if (tooLong || holdExpired) {
+                down();
+            }
+
+#ifdef GPS_DEBUG
+        } else if (fixHoldEnds != 0) {
+            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
+#endif
+        }
+    }
+    // ===================== end GPS_ACTIVE state ========================
 
     if (config.position.fixed_position == true && hasValidLocation)
         return disable(); // This should trigger when we have a fixed position, and get that first position
@@ -1198,7 +1246,7 @@ static const char *DETECTED_MESSAGE = "%s detected";
         LOG_DEBUG(PROBE_MESSAGE, COMMAND, FAMILY_NAME);                                                                          \
         clearBuffer();                                                                                                           \
         _serial_gps->write(COMMAND "\r\n");                                                                                      \
-        GnssModel_t detectedDriver = getProbeResponse(TIMEOUT, RESPONSE_MAP);                                                    \
+        GnssModel_t detectedDriver = getProbeResponse(TIMEOUT, RESPONSE_MAP, serialSpeed);                                       \
         if (detectedDriver != GNSS_MODEL_UNKNOWN) {                                                                              \
             return detectedDriver;                                                                                               \
         }                                                                                                                        \
@@ -1206,6 +1254,10 @@ static const char *DETECTED_MESSAGE = "%s detected";
 
 GnssModel_t GPS::probe(int serialSpeed)
 {
+    uint8_t buffer[768] = {0};
+
+    switch (currentStep) {
+    case 0: {
 #if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
         _serial_gps->end();
         _serial_gps->begin(serialSpeed);
@@ -1215,15 +1267,32 @@ GnssModel_t GPS::probe(int serialSpeed)
         _serial_gps->begin(serialSpeed);
 #else
         if (_serial_gps->baudRate() != serialSpeed) {
-        LOG_DEBUG("Set Baud to %i", serialSpeed);
+            LOG_DEBUG("Set GPS Baud to %i", serialSpeed);
             _serial_gps->updateBaudRate(serialSpeed);
         }
 #endif
 
         memset(&ublox_info, 0, sizeof(ublox_info));
-    uint8_t buffer[768] = {0};
         delay(100);
 
+#if defined(PIN_GPS_RESET) && PIN_GPS_RESET != -1
+        digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
+        delay(10);
+        digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
+
+        // attempt to detect the chip based on boot messages
+        std::vector<ChipInfo> passive_detect = {
+            {"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
+            {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
+            {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352},
+            {"UC6580", "UC6580", GNSS_MODEL_UC6580},
+            // as L76K is sort of a last ditch effort, we won't attempt to detect it by startup messages for now.
+            /*{"L76K", "SW=URANUS", GNSS_MODEL_MTK}*/};
+        GnssModel_t detectedDriver = getProbeResponse(500, passive_detect, serialSpeed);
+        if (detectedDriver != GNSS_MODEL_UNKNOWN) {
+            return detectedDriver;
+        }
+#endif
         // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
         _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
         delay(20);
@@ -1232,17 +1301,35 @@ GnssModel_t GPS::probe(int serialSpeed)
         _serial_gps->write("$PUBX,40,GSV,0,0,0,0,0,0*59\r\n");
         _serial_gps->write("$PUBX,40,VTG,0,0,0,0,0,0*5E\r\n");
         delay(20);
+        // Close NMEA sequences on CM121
+        _serial_gps->write("$CFGMSG,0,1,0,1*1B\r\n");
+        _serial_gps->write("$CFGMSG,0,2,0,1*18\r\n");
+        _serial_gps->write("$CFGMSG,0,3,0,1*19\r\n");
+        currentDelay = 20;
+        currentStep = 1;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 1: {
 
-    // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A
-    std::vector<ChipInfo> unicore = {{"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}};
+        // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A,or CM121
+        std::vector<ChipInfo> unicore = {
+            {"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}, {"CM121", "CM121", GNSS_MODEL_CM121}};
         PROBE_FAMILY("Unicore Family", "$PDTINFO", unicore, 500);
-
+        currentDelay = 20;
+        currentStep = 2;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 2: {
         std::vector<ChipInfo> atgm = {
             {"ATGM336H", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H},
             /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS)) based on AT6558 */
             {"ATGM332D", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H}};
         PROBE_FAMILY("ATGM33xx Family", "$PCAS06,1*1A", atgm, 500);
-
+        currentDelay = 20;
+        currentStep = 3;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 3: {
         /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
         _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume
         _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume
@@ -1251,9 +1338,18 @@ GnssModel_t GPS::probe(int serialSpeed)
                                         {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
                                         {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352}};
         PROBE_FAMILY("Airoha Family", "$PAIR021*39", airoha, 1000);
-
+        currentDelay = 20;
+        currentStep = 4;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 4: {
         PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500);
         PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500);
+        currentDelay = 20;
+        currentStep = 5;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 5: {
 
         // Close all NMEA sentences, valid for MTK3333 and MTK3339 platforms
         _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
@@ -1264,7 +1360,11 @@ GnssModel_t GPS::probe(int serialSpeed)
                                      {"L80", "_3339_", GNSS_MODEL_MTK_L76B}};
 
         PROBE_FAMILY("MTK Family", "$PMTK605*31", mtk, 500);
-
+        currentDelay = 20;
+        currentStep = 6;
+        return GNSS_MODEL_UNKNOWN;
+    }
+    case 6: {
         uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
         UBXChecksum(cfg_rate, sizeof(cfg_rate));
         clearBuffer();
@@ -1273,6 +1373,8 @@ GnssModel_t GPS::probe(int serialSpeed)
         GPS_RESPONSE response = getACK(0x06, 0x08, 750);
         if (response == GNSS_RESPONSE_NONE) {
             LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
+            currentDelay = 2000;
+            currentStep = 0;
             return GNSS_MODEL_UNKNOWN;
         } else if (response == GNSS_RESPONSE_FRAME_ERRORS) {
             LOG_INFO("UBlox Frame Errors (baudrate %d)", serialSpeed);
@@ -1356,40 +1458,66 @@ GnssModel_t GPS::probe(int serialSpeed)
                 return GNSS_MODEL_UBLOX10;
             }
         }
+    }
+    }
     LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
+    currentDelay = 2000;
+    currentStep = 0;
     return GNSS_MODEL_UNKNOWN;
 }
 
-GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap)
+GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap, int serialSpeed)
 {
-    String response = "";
+    // Calculate buffer size based on baud rate - 256 bytes for 9600 baud as baseline
+    // Higher baud rates get proportionally larger buffers to handle more data
+    int bufferSize = (serialSpeed * 256) / 9600;
+    // Clamp buffer size between reasonable limits
+    if (bufferSize < 128)
+        bufferSize = 128;
+    if (bufferSize > 2048)
+        bufferSize = 2048;
+
+    char *response = new char[bufferSize](); // Dynamically allocate based on baud rate
+    uint16_t responseLen = 0;
     unsigned long start = millis();
     while (millis() - start < timeout) {
         if (_serial_gps->available()) {
-            response += (char)_serial_gps->read();
+            char c = _serial_gps->read();
 
-            if (response.endsWith(",") || response.endsWith("\r\n")) {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(response.c_str());
-#endif
+            // Add char to buffer if there's space
+            if (responseLen < bufferSize - 1) {
+                response[responseLen++] = c;
+                response[responseLen] = '\0';
+            }
+
+            if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
-                    if (strstr(response.c_str(), chipInfo.detectionString.c_str()) != nullptr) {
+                    if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
+#ifdef GPS_DEBUG
+                        LOG_DEBUG(response);
+#endif
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
+                        delete[] response; // Cleanup before return
                         return chipInfo.driver;
                     }
                 }
             }
-            if (response.endsWith("\r\n")) {
-                response.trim();
-                response = ""; // Reset the response string for the next potential message
+            if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(response);
+#endif
+                // Reset the response buffer for the next potential message
+                responseLen = 0;
+                response[0] = '\0';
             }
         }
     }
 #ifdef GPS_DEBUG
-    LOG_DEBUG(response.c_str());
+    LOG_DEBUG(response);
 #endif
-    return GNSS_MODEL_UNKNOWN; // Return empty string on timeout
+    delete[] response;         // Cleanup before return
+    return GNSS_MODEL_UNKNOWN; // Return unknown on timeout
 }
 
 GPS *GPS::createGps()
@@ -1414,7 +1542,7 @@ GPS *GPS::createGps()
         _en_gpio = PIN_GPS_EN;
 #endif
 #ifdef ARCH_PORTDUINO
-    if (!settingsMap[has_gps])
+    if (!portduino_config.has_gps)
         return nullptr;
 #endif
     if (!_rx_gpio || !_serial_gps) // Configured to have no GPS at all
@@ -1465,8 +1593,6 @@ GPS *GPS::createGps()
 
 #ifdef PIN_GPS_RESET
     pinMode(PIN_GPS_RESET, OUTPUT);
-    digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
-    delay(10);
     digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
 
@@ -1504,28 +1630,10 @@ static int32_t toDegInt(RawDegrees d)
  * Perform any processing that should be done only while the GPS is awake and looking for a fix.
  * Override this method to check for new locations
  *
- * @return true if we've acquired a new location
+ * @return true if we've set a new time
  */
 bool GPS::lookForTime()
 {
-
-#ifdef GNSS_AIROHA
-    uint8_t fix = reader.fixQuality();
-    if (fix >= 1 && fix <= 5) {
-        if (lastFixStartMsec > 0) {
-            if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
-                return false;
-            } else {
-                clearBuffer();
-            }
-        } else {
-            lastFixStartMsec = millis();
-            return false;
-        }
-    } else {
-        return false;
-    }
-#endif
     auto ti = reader.time;
     auto d = reader.date;
     if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
@@ -1542,13 +1650,13 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         t.tm_year = d.year() - 1900;
         t.tm_isdst = false;
         if (t.tm_mon > -1) {
-            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
-                      t.tm_sec, ti.age());
-            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultInvalidTime) {
-                // Clear the GPS buffer if we got an invalid time
-                clearBuffer();
-            }
+            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultSuccess) {
+                LOG_DEBUG("NMEA GPS time set %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour,
+                          t.tm_min, t.tm_sec, ti.age());
                 return true;
+            } else {
+                return false;
+            }
         } else
             return false;
     } else
@@ -1563,25 +1671,6 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
  */
 bool GPS::lookForLocation()
 {
-#ifdef GNSS_AIROHA
-    if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
-        uint8_t fix = reader.fixQuality();
-        if (fix >= 1 && fix <= 5) {
-            if (lastFixStartMsec > 0) {
-                if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
-                    return false;
-                } else {
-                    clearBuffer();
-                }
-            } else {
-                lastFixStartMsec = millis();
-                return false;
-            }
-        } else {
-            return false;
-        }
-    }
-#endif
     // By default, TinyGPS++ does not parse GPGSA lines, which give us
     //   the 2D/3D fixType (see NMEAGPS.h)
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)
@@ -1589,6 +1678,10 @@ bool GPS::lookForLocation()
 
 #ifndef TINYGPS_OPTION_NO_STATISTICS
     if (reader.failedChecksum() > lastChecksumFailCount) {
+// In a GPS_DEBUG build we want to log all of these. In production, we only care if there are many of them.
+#ifndef GPS_DEBUG
+        if (reader.failedChecksum() > 4)
+#endif
             LOG_WARN("%u new GPS checksum failures, for a total of %u", reader.failedChecksum() - lastChecksumFailCount,
                      reader.failedChecksum());
         lastChecksumFailCount = reader.failedChecksum();

src/gps/GPS.h

@@ -16,6 +16,9 @@
 #define GPS_EN_ACTIVE 1
 #endif
 
+static constexpr uint32_t GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS = 10 * 1000UL;
+static constexpr uint32_t GPS_FIX_HOLD_MAX_MS = 20000;
+
 typedef enum {
     GNSS_MODEL_ATGM336H,
     GNSS_MODEL_MTK,
@@ -31,7 +34,8 @@ typedef enum {
     GNSS_MODEL_MTK_PA1616S,
     GNSS_MODEL_AG3335,
     GNSS_MODEL_AG3352,
-    GNSS_MODEL_LS20031
+    GNSS_MODEL_LS20031,
+    GNSS_MODEL_CM121
 } GnssModel_t;
 
 typedef enum {
@@ -150,6 +154,8 @@ class GPS : private concurrency::OSThread
     TinyGPSPlus reader;
     uint8_t fixQual = 0; // fix quality from GPGGA
     uint32_t lastChecksumFailCount = 0;
+    uint8_t currentStep = 0;
+    int32_t currentDelay = 2000;
 
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
     // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field
@@ -159,7 +165,7 @@ class GPS : private concurrency::OSThread
     uint8_t fixType = 0;      // fix type from GPGSA
 #endif
 
-    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
+    uint32_t fixHoldEnds = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
 
@@ -172,8 +178,6 @@ class GPS : private concurrency::OSThread
      */
     bool hasValidLocation = false; // default to false, until we complete our first read
 
-    bool isInPowersave = false;
-
     bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop()
 
     bool hasGPS = false; // Do we have a GPS we are talking to
@@ -236,7 +240,7 @@ class GPS : private concurrency::OSThread
 
     virtual int32_t runOnce() override;
 
-    GnssModel_t getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap);
+    GnssModel_t getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap, int serialSpeed);
 
     // Get GNSS model
     GnssModel_t probe(int serialSpeed);

src/gps/RTC.cpp

@@ -9,6 +9,9 @@
 static RTCQuality currentQuality = RTCQualityNone;
 uint32_t lastSetFromPhoneNtpOrGps = 0;
 
+static uint32_t lastTimeValidationWarning = 0;
+static const uint32_t TIME_VALIDATION_WARNING_INTERVAL_MS = 15000; // 15 seconds
+
 RTCQuality getRTCQuality()
 {
     return currentQuality;
@@ -23,7 +26,7 @@ static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only upda
  * Reads the current date and time from the RTC module and updates the system time.
  * @return True if the RTC was successfully read and the system time was updated, false otherwise.
  */
-void readFromRTC()
+RTCSetResult readFromRTC()
 {
     struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
@@ -44,15 +47,25 @@ void readFromRTC()
         t.tm_sec = rtc.getSecond();
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+
+#ifdef BUILD_EPOCH
+        if (tv.tv_sec < BUILD_EPOCH) {
+            if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
+                LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+            }
+            return RTCSetResultInvalidTime;
+        }
+#endif
+
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        if (currentQuality == RTCQualityNone) {
             timeStartMsec = now;
             zeroOffsetSecs = tv.tv_sec;
-        if (currentQuality == RTCQualityNone) {
             currentQuality = RTCQualityDevice;
         }
+        return RTCSetResultSuccess;
     }
 #elif defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
@@ -75,15 +88,55 @@ void readFromRTC()
         t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+
+#ifdef BUILD_EPOCH
+        if (tv.tv_sec < BUILD_EPOCH) {
+            if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
+                LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+                lastTimeValidationWarning = millis();
+            }
+            return RTCSetResultInvalidTime;
+        }
+#endif
+
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        if (currentQuality == RTCQualityNone) {
             timeStartMsec = now;
             zeroOffsetSecs = tv.tv_sec;
-        if (currentQuality == RTCQualityNone) {
             currentQuality = RTCQualityDevice;
         }
+        return RTCSetResultSuccess;
+    }
+#elif defined(RX8130CE_RTC)
+    if (rtc_found.address == RX8130CE_RTC) {
+        uint32_t now = millis();
+        ArtronShop_RX8130CE rtc(&Wire);
+        tm t;
+        if (rtc.getTime(&t)) {
+            tv.tv_sec = gm_mktime(&t);
+            tv.tv_usec = 0;
+
+            uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+            LOG_DEBUG("Read RTC time from RX8130CE getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900,
+                      t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+#ifdef BUILD_EPOCH
+            if (tv.tv_sec < BUILD_EPOCH) {
+                if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
+                    LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+                    lastTimeValidationWarning = millis();
+                }
+                return RTCSetResultInvalidTime;
+            }
+#endif
+            if (currentQuality == RTCQualityNone) {
+                timeStartMsec = now;
+                zeroOffsetSecs = tv.tv_sec;
+                currentQuality = RTCQualityDevice;
+            }
+            return RTCSetResultSuccess;
+        }
     }
 #else
     if (!gettimeofday(&tv, NULL)) {
@@ -92,8 +145,10 @@ void readFromRTC()
         LOG_DEBUG("Read RTC time as %ld", printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
+        return RTCSetResultSuccess;
     }
 #endif
+    return RTCSetResultNotSet;
 }
 
 /**
@@ -101,7 +156,7 @@ void readFromRTC()
  *
  * @param q The quality of the provided time.
  * @param tv A pointer to a timeval struct containing the time to potentially set the RTC to.
- * @return True if the RTC was set, false otherwise.
+ * @return RTCSetResult
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
@@ -112,7 +167,20 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
     uint32_t printableEpoch = tv->tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
 #ifdef BUILD_EPOCH
     if (tv->tv_sec < BUILD_EPOCH) {
+        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
             LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+            lastTimeValidationWarning = millis();
+        }
+        return RTCSetResultInvalidTime;
+    } else if ((uint64_t)tv->tv_sec > ((uint64_t)BUILD_EPOCH + FORTY_YEARS)) {
+        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
+            // Calculate max allowed time safely to avoid overflow in logging
+            uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
+            uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
+            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
+                     (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
+            lastTimeValidationWarning = millis();
+        }
         return RTCSetResultInvalidTime;
     }
 #endif
@@ -175,6 +243,17 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
             LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
         }
+#elif defined(RX8130CE_RTC)
+        if (rtc_found.address == RX8130CE_RTC) {
+            ArtronShop_RX8130CE rtc(&Wire);
+            tm *t = gmtime(&tv->tv_sec);
+            if (rtc.setTime(*t)) {
+                LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,
+                          t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
+            } else {
+                LOG_WARN("Failed to set time for RX8130CE");
+            }
+        }
 #elif defined(ARCH_ESP32)
         settimeofday(tv, NULL);
 #endif
@@ -230,7 +309,20 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
 #ifdef BUILD_EPOCH
     if (tv.tv_sec < BUILD_EPOCH) {
-        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
+            LOG_WARN("Ignore time (%lu) before build epoch (%lu)!", printableEpoch, BUILD_EPOCH);
+            lastTimeValidationWarning = millis();
+        }
+        return RTCSetResultInvalidTime;
+    } else if ((uint64_t)tv.tv_sec > ((uint64_t)BUILD_EPOCH + FORTY_YEARS)) {
+        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
+            // Calculate max allowed time safely to avoid overflow in logging
+            uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
+            uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
+            LOG_WARN("Ignore time (%lu) too far in the future (build epoch: %lu, max allowed: %lu)!", printableEpoch,
+                     (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
+            lastTimeValidationWarning = millis();
+        }
         return RTCSetResultInvalidTime;
     }
 #endif
@@ -290,14 +382,40 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
 time_t gm_mktime(struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
-    setenv("TZ", "GMT0", 1);
-    time_t res = mktime(tm);
-    if (*config.device.tzdef) {
-        setenv("TZ", config.device.tzdef, 1);
-    } else {
-        setenv("TZ", "UTC0", 1);
+    time_t result = 0;
+
+    // First, get us to the start of tm->year, by calcuating the number of days since the Unix epoch.
+    int year = 1900 + tm->tm_year; // tm_year is years since 1900
+    int year_minus_one = year - 1;
+    int days_before_this_year = 0;
+    days_before_this_year += year_minus_one * 365;
+    // leap days: every 4 years, except 100s, but including 400s.
+    days_before_this_year += year_minus_one / 4 - year_minus_one / 100 + year_minus_one / 400;
+    // subtract from 1970-01-01 to get days since epoch
+    days_before_this_year -= 719162; // (1969 * 365 + 1969 / 4 - 1969 / 100 + 1969 / 400);
+
+    // Now, within this tm->year, compute the days *before* this tm->month starts.
+    int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
+    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                // tm->tm_mon is 0..11
+
+    // If this is a leap year, and we're past February, add a day:
+    if (tm->tm_mon >= 2 && (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0)) {
+        days_this_year_before_this_month += 1;
     }
-    return res;
+
+    // And within this month:
+    int days_this_month_before_today = tm->tm_mday - 1; // tm->tm_mday is 1..31
+
+    // Now combine them all together, and convert days to seconds:
+    result += (days_before_this_year + days_this_year_before_this_month + days_this_month_before_today);
+    result *= 86400L;
+
+    // Finally, add in the hours, minutes, and seconds of today:
+    result += tm->tm_hour * 3600;
+    result += tm->tm_min * 60;
+    result += tm->tm_sec;
+
+    return result;
 #else
     return mktime(tm);
 #endif

src/gps/RTC.h

@@ -4,6 +4,10 @@
 #include "sys/time.h"
 #include <Arduino.h>
 
+#ifdef RX8130CE_RTC
+#include <ArtronShop_RX8130CE.h>
+#endif
+
 enum RTCQuality {
 
     /// We haven't had our RTC set yet
@@ -48,10 +52,13 @@ uint32_t getTime(bool local = false);
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
 uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
-void readFromRTC();
+RTCSetResult readFromRTC();
 
 time_t gm_mktime(struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60
+#ifdef BUILD_EPOCH
+static constexpr uint64_t FORTY_YEARS = (40ULL * 365 * SEC_PER_DAY); // Use 64-bit arithmetic to prevent overflow
+#endif

src/graphics/EInkDisplay2.cpp

@@ -67,20 +67,28 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 
     // FIXME - only draw bits have changed (use backbuf similar to the other displays)
     const bool flipped = config.display.flip_screen;
+    // HACK for L1 EInk
+#if defined(SEEED_WIO_TRACKER_L1_EINK)
+    // For SEEED_WIO_TRACKER_L1_EINK, setRotation(3) is correct but mirrored; flip both axes
+    for (uint32_t y = 0; y < displayHeight; y++) {
+        for (uint32_t x = 0; x < displayWidth; x++) {
+            auto b = buffer[x + (y / 8) * displayWidth];
+            auto isset = b & (1 << (y & 7));
+            adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
+        }
+    }
+#else
     for (uint32_t y = 0; y < displayHeight; y++) {
         for (uint32_t x = 0; x < displayWidth; x++) {
-            // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
             auto b = buffer[x + (y / 8) * displayWidth];
             auto isset = b & (1 << (y & 7));
-
-            // Handle flip here, rather than with setRotation(),
-            // Avoids issues when display width is not a multiple of 8
             if (flipped)
                 adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
             else
                 adafruitDisplay->drawPixel(x, y, isset ? GxEPD_BLACK : GxEPD_WHITE);
         }
     }
+#endif
 
     // Trigger the refresh in GxEPD2
     LOG_DEBUG("Update E-Paper");
@@ -235,7 +243,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(1);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(HELTEC_MESH_POCKET)
+#elif defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK) || defined(HELTEC_MESH_SOLAR_EINK)
     {
         spi1 = &SPI1;
         spi1->begin();
@@ -249,6 +257,7 @@ bool EInkDisplay::connect()
         // Init GxEPD2
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
+        adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
 #elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
 

src/graphics/EInkDisplay2.h

@@ -84,7 +84,7 @@ class EInkDisplay : public OLEDDisplay
     SPIClass *hspi = NULL;
 #endif
 
-#if defined(HELTEC_MESH_POCKET)
+#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK) || defined(HELTEC_MESH_SOLAR_EINK)
     SPIClass *spi1 = NULL;
 #endif
 

src/graphics/Panel_sdl.cpp

@@ -0,0 +1,687 @@
+/*----------------------------------------------------------------------------/
+  Lovyan GFX - Graphics library for embedded devices.
+
+Original Source:
+ https://github.com/lovyan03/LovyanGFX/
+
+Licence:
+ [FreeBSD](https://github.com/lovyan03/LovyanGFX/blob/master/license.txt)
+
+Author:
+ [lovyan03](https://twitter.com/lovyan03)
+
+Contributors:
+ [ciniml](https://github.com/ciniml)
+ [mongonta0716](https://github.com/mongonta0716)
+ [tobozo](https://github.com/tobozo)
+
+Porting for SDL:
+ [imliubo](https://github.com/imliubo)
+/----------------------------------------------------------------------------*/
+#include "Panel_sdl.hpp"
+
+#if defined(SDL_h_)
+
+// #include "../common.hpp"
+// #include "../../misc/common_function.hpp"
+// #include "../../Bus.hpp"
+
+#include <list>
+#include <math.h>
+#include <vector>
+#ifndef M_PI
+#define M_PI 3.14159265358979323846
+#endif
+
+namespace lgfx
+{
+inline namespace v1
+{
+SDL_Keymod Panel_sdl::_keymod = KMOD_NONE;
+static SDL_semaphore *_update_in_semaphore = nullptr;
+static SDL_semaphore *_update_out_semaphore = nullptr;
+volatile static uint32_t _in_step_exec = 0;
+volatile static uint32_t _msec_step_exec = 512;
+static bool _inited = false;
+static bool _all_close = false;
+
+volatile uint8_t Panel_sdl::_gpio_dummy_values[EMULATED_GPIO_MAX];
+
+static inline void *heap_alloc_dma(size_t length)
+{
+    return malloc(length);
+} // aligned_alloc(16, length);
+static inline void heap_free(void *buf)
+{
+    free(buf);
+}
+
+static std::list<monitor_t *> _list_monitor;
+
+static monitor_t *const getMonitorByWindowID(uint32_t windowID)
+{
+    for (auto &m : _list_monitor) {
+        if (SDL_GetWindowID(m->window) == windowID) {
+            return m;
+        }
+    }
+    return nullptr;
+}
+//----------------------------------------------------------------------------
+
+static std::vector<Panel_sdl::KeyCodeMapping_t> _key_code_map;
+
+void Panel_sdl::addKeyCodeMapping(SDL_KeyCode keyCode, uint8_t gpio)
+{
+    if (gpio > EMULATED_GPIO_MAX)
+        return;
+    KeyCodeMapping_t map;
+    map.keycode = keyCode;
+    map.gpio = gpio;
+    _key_code_map.push_back(map);
+}
+
+int Panel_sdl::getKeyCodeMapping(SDL_KeyCode keyCode)
+{
+    for (const auto &i : _key_code_map) {
+        if (i.keycode == keyCode)
+            return i.gpio;
+    }
+    return -1;
+}
+
+void Panel_sdl::_event_proc(void)
+{
+    SDL_Event event;
+    while (SDL_PollEvent(&event)) {
+        if ((event.type == SDL_KEYDOWN) || (event.type == SDL_KEYUP)) {
+            auto mon = getMonitorByWindowID(event.button.windowID);
+            int gpio = -1;
+
+            /// Check key mapping
+            gpio = getKeyCodeMapping((SDL_KeyCode)event.key.keysym.sym);
+            if (gpio < 0) {
+                switch (event.key.keysym.sym) { /// M5StackのBtnA～BtnCのエミュレート;
+                // case SDLK_LEFT:  gpio = 39; break;
+                // case SDLK_DOWN:  gpio = 38; break;
+                // case SDLK_RIGHT: gpio = 37; break;
+                // case SDLK_UP:    gpio = 36; break;
+
+                /// L/Rキーで画面回転
+                case SDLK_r:
+                case SDLK_l:
+                    if (event.type == SDL_KEYDOWN && event.key.keysym.mod == _keymod) {
+                        if (mon != nullptr) {
+                            mon->frame_rotation = (mon->frame_rotation += event.key.keysym.sym == SDLK_r ? 1 : -1);
+                            int x, y, w, h;
+                            SDL_GetWindowSize(mon->window, &w, &h);
+                            SDL_GetWindowPosition(mon->window, &x, &y);
+                            SDL_SetWindowSize(mon->window, h, w);
+                            SDL_SetWindowPosition(mon->window, x + (w - h) / 2, y + (h - w) / 2);
+                            mon->panel->sdl_invalidate();
+                        }
+                    }
+                    break;
+
+                /// 1～6キーで画面拡大率変更
+                case SDLK_1:
+                case SDLK_2:
+                case SDLK_3:
+                case SDLK_4:
+                case SDLK_5:
+                case SDLK_6:
+                    if (event.type == SDL_KEYDOWN && event.key.keysym.mod == _keymod) {
+                        if (mon != nullptr) {
+                            int size = 1 + (event.key.keysym.sym - SDLK_1);
+                            _update_scaling(mon, size, size);
+                        }
+                    }
+                    break;
+                default:
+                    continue;
+                }
+            }
+
+            if (event.type == SDL_KEYDOWN) {
+                Panel_sdl::gpio_lo(gpio);
+            } else {
+                Panel_sdl::gpio_hi(gpio);
+            }
+        } else if (event.type == SDL_MOUSEBUTTONDOWN || event.type == SDL_MOUSEBUTTONUP || event.type == SDL_MOUSEMOTION) {
+            auto mon = getMonitorByWindowID(event.button.windowID);
+            if (mon != nullptr) {
+                {
+                    int x, y, w, h;
+                    SDL_GetWindowSize(mon->window, &w, &h);
+                    SDL_GetMouseState(&x, &y);
+                    float sf = sinf(mon->frame_angle * M_PI / 180);
+                    float cf = cosf(mon->frame_angle * M_PI / 180);
+                    x -= w / 2.0f;
+                    y -= h / 2.0f;
+                    float nx = y * sf + x * cf;
+                    float ny = y * cf - x * sf;
+                    if (mon->frame_rotation & 1) {
+                        std::swap(w, h);
+                    }
+                    x = (nx * mon->frame_width / w) + (mon->frame_width >> 1);
+                    y = (ny * mon->frame_height / h) + (mon->frame_height >> 1);
+                    mon->touch_x = x - mon->frame_inner_x;
+                    mon->touch_y = y - mon->frame_inner_y;
+                }
+                if (event.type == SDL_MOUSEBUTTONDOWN && event.button.button == SDL_BUTTON_LEFT) {
+                    mon->touched = true;
+                }
+                if (event.type == SDL_MOUSEBUTTONUP && event.button.button == SDL_BUTTON_LEFT) {
+                    mon->touched = false;
+                }
+            }
+        } else if (event.type == SDL_WINDOWEVENT) {
+            auto monitor = getMonitorByWindowID(event.window.windowID);
+            if (monitor) {
+                if (event.window.event == SDL_WINDOWEVENT_RESIZED) {
+                    int mw, mh;
+                    SDL_GetRendererOutputSize(monitor->renderer, &mw, &mh);
+                    if (monitor->frame_rotation & 1) {
+                        std::swap(mw, mh);
+                    }
+                    monitor->scaling_x = (mw * 2 / monitor->frame_width) / 2.0f;
+                    monitor->scaling_y = (mh * 2 / monitor->frame_height) / 2.0f;
+                    monitor->panel->sdl_invalidate();
+                } else if (event.window.event == SDL_WINDOWEVENT_CLOSE) {
+                    monitor->closing = true;
+                }
+            }
+        } else if (event.type == SDL_QUIT) {
+            for (auto &m : _list_monitor) {
+                m->closing = true;
+            }
+        }
+    }
+}
+
+/// デバッガでステップ実行されていることを検出するスレッド用関数。
+static int detectDebugger(bool *running)
+{
+    uint32_t prev_ms = SDL_GetTicks();
+    do {
+        SDL_Delay(1);
+        uint32_t ms = SDL_GetTicks();
+        /// 時間間隔が広すぎる場合はステップ実行中 (ブレークポイントで止まった)と判断する。
+        /// また、解除されたと判断した後も1023msecほど状態を維持する。
+        if (ms - prev_ms > 64) {
+            _in_step_exec = _msec_step_exec;
+        } else if (_in_step_exec) {
+            --_in_step_exec;
+        }
+        prev_ms = ms;
+    } while (*running);
+    return 0;
+}
+
+void Panel_sdl::_update_proc(void)
+{
+    for (auto it = _list_monitor.begin(); it != _list_monitor.end();) {
+        if ((*it)->closing) {
+            if ((*it)->texture_frameimage) {
+                SDL_DestroyTexture((*it)->texture_frameimage);
+            }
+            SDL_DestroyTexture((*it)->texture);
+            SDL_DestroyRenderer((*it)->renderer);
+            SDL_DestroyWindow((*it)->window);
+            _list_monitor.erase(it++);
+            if (_list_monitor.empty()) {
+                _all_close = true;
+                return;
+            }
+            continue;
+        }
+        (*it)->panel->sdl_update();
+        ++it;
+    }
+}
+
+int Panel_sdl::setup(void)
+{
+    if (_inited)
+        return 1;
+    _inited = true;
+
+    /// Add default keycode mapping
+    /// M5StackのBtnA～BtnCのエミュレート;
+    addKeyCodeMapping(SDLK_LEFT, 39);
+    addKeyCodeMapping(SDLK_DOWN, 38);
+    addKeyCodeMapping(SDLK_RIGHT, 37);
+    addKeyCodeMapping(SDLK_UP, 36);
+
+    SDL_CreateThread((SDL_ThreadFunction)detectDebugger, "dbg", &_inited);
+
+    _update_in_semaphore = SDL_CreateSemaphore(0);
+    _update_out_semaphore = SDL_CreateSemaphore(0);
+    for (size_t pin = 0; pin < EMULATED_GPIO_MAX; ++pin) {
+        gpio_hi(pin);
+    }
+    /*Initialize the SDL*/
+    SDL_Init(SDL_INIT_VIDEO);
+    SDL_StartTextInput();
+
+    // SDL_SetThreadPriority(SDL_ThreadPriority::SDL_THREAD_PRIORITY_HIGH);
+    return 0;
+}
+
+int Panel_sdl::loop(void)
+{
+    if (!_inited)
+        return 1;
+
+    _event_proc();
+    SDL_SemWaitTimeout(_update_in_semaphore, 1);
+    _update_proc();
+    _event_proc();
+    if (SDL_SemValue(_update_out_semaphore) == 0) {
+        SDL_SemPost(_update_out_semaphore);
+    }
+
+    return _all_close;
+}
+
+int Panel_sdl::close(void)
+{
+    if (!_inited)
+        return 1;
+    _inited = false;
+
+    SDL_StopTextInput();
+    SDL_DestroySemaphore(_update_in_semaphore);
+    SDL_DestroySemaphore(_update_out_semaphore);
+    SDL_Quit();
+    return 0;
+}
+
+int Panel_sdl::main(int (*fn)(bool *), uint32_t msec_step_exec)
+{
+    _msec_step_exec = msec_step_exec;
+
+    /// SDLの準備
+    if (0 != Panel_sdl::setup()) {
+        return 1;
+    }
+
+    /// ユーザコード関数の動作・停止フラグ
+    bool running = true;
+
+    /// ユーザコード関数を起動する
+    auto thread = SDL_CreateThread((SDL_ThreadFunction)fn, "fn", &running);
+
+    /// 全部のウィンドウが閉じられるまでSDLのイベント・描画処理を継続
+    while (0 == Panel_sdl::loop()) {
+    };
+
+    /// ユーザコード関数を終了する
+    running = false;
+    SDL_WaitThread(thread, nullptr);
+
+    /// SDLを終了する
+    return Panel_sdl::close();
+}
+
+void Panel_sdl::setScaling(uint_fast8_t scaling_x, uint_fast8_t scaling_y)
+{
+    monitor.scaling_x = scaling_x;
+    monitor.scaling_y = scaling_y;
+}
+
+void Panel_sdl::setFrameImage(const void *frame_image, int frame_width, int frame_height, int inner_x, int inner_y)
+{
+    monitor.frame_image = frame_image;
+    monitor.frame_width = frame_width;
+    monitor.frame_height = frame_height;
+    monitor.frame_inner_x = inner_x;
+    monitor.frame_inner_y = inner_y;
+}
+
+void Panel_sdl::setFrameRotation(uint_fast16_t frame_rotation)
+{
+    monitor.frame_rotation = frame_rotation;
+    monitor.frame_angle = (monitor.frame_rotation) * 90;
+}
+
+Panel_sdl::~Panel_sdl(void)
+{
+    _list_monitor.remove(&monitor);
+    SDL_DestroyMutex(_sdl_mutex);
+}
+
+Panel_sdl::Panel_sdl(void) : Panel_FrameBufferBase()
+{
+    _sdl_mutex = SDL_CreateMutex();
+    _auto_display = true;
+    monitor.panel = this;
+}
+
+bool Panel_sdl::init(bool use_reset)
+{
+    initFrameBuffer(_cfg.panel_width * 4, _cfg.panel_height);
+    bool res = Panel_FrameBufferBase::init(use_reset);
+
+    _list_monitor.push_back(&monitor);
+
+    return res;
+}
+
+color_depth_t Panel_sdl::setColorDepth(color_depth_t depth)
+{
+    auto bits = depth & color_depth_t::bit_mask;
+    if (bits >= 16) {
+        depth = (bits > 16) ? rgb888_3Byte : rgb565_2Byte;
+    } else {
+        depth = (depth == color_depth_t::grayscale_8bit) ? grayscale_8bit : rgb332_1Byte;
+    }
+    _write_depth = depth;
+    _read_depth = depth;
+
+    return depth;
+}
+
+Panel_sdl::lock_t::lock_t(Panel_sdl *parent) : _parent{parent}
+{
+    SDL_LockMutex(parent->_sdl_mutex);
+};
+
+Panel_sdl::lock_t::~lock_t(void)
+{
+    ++_parent->_modified_counter;
+    SDL_UnlockMutex(_parent->_sdl_mutex);
+    if (SDL_SemValue(_update_in_semaphore) < 2) {
+        SDL_SemPost(_update_in_semaphore);
+        if (!_in_step_exec) {
+            SDL_SemWaitTimeout(_update_out_semaphore, 1);
+        }
+    }
+};
+
+void Panel_sdl::drawPixelPreclipped(uint_fast16_t x, uint_fast16_t y, uint32_t rawcolor)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::drawPixelPreclipped(x, y, rawcolor);
+}
+
+void Panel_sdl::writeFillRectPreclipped(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, uint32_t rawcolor)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::writeFillRectPreclipped(x, y, w, h, rawcolor);
+}
+
+void Panel_sdl::writeBlock(uint32_t rawcolor, uint32_t length)
+{
+    //    lock_t lock(this);
+    Panel_FrameBufferBase::writeBlock(rawcolor, length);
+}
+
+void Panel_sdl::writeImage(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, pixelcopy_t *param, bool use_dma)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::writeImage(x, y, w, h, param, use_dma);
+}
+
+void Panel_sdl::writeImageARGB(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, pixelcopy_t *param)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::writeImageARGB(x, y, w, h, param);
+}
+
+void Panel_sdl::writePixels(pixelcopy_t *param, uint32_t len, bool use_dma)
+{
+    lock_t lock(this);
+    Panel_FrameBufferBase::writePixels(param, len, use_dma);
+}
+
+void Panel_sdl::display(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h)
+{
+    (void)x;
+    (void)y;
+    (void)w;
+    (void)h;
+    if (_in_step_exec) {
+        if (_display_counter != _modified_counter) {
+            do {
+                SDL_SemPost(_update_in_semaphore);
+                SDL_SemWaitTimeout(_update_out_semaphore, 1);
+            } while (_display_counter != _modified_counter);
+            SDL_Delay(1);
+        }
+    }
+}
+
+uint_fast8_t Panel_sdl::getTouchRaw(touch_point_t *tp, uint_fast8_t count)
+{
+    (void)count;
+    tp->x = monitor.touch_x;
+    tp->y = monitor.touch_y;
+    tp->size = monitor.touched ? 1 : 0;
+    tp->id = 0;
+    return monitor.touched;
+}
+
+void Panel_sdl::setWindowTitle(const char *title)
+{
+    _window_title = title;
+    if (monitor.window) {
+        SDL_SetWindowTitle(monitor.window, _window_title);
+    }
+}
+
+void Panel_sdl::_update_scaling(monitor_t *mon, float sx, float sy)
+{
+    mon->scaling_x = sx;
+    mon->scaling_y = sy;
+    int nw = mon->frame_width;
+    int nh = mon->frame_height;
+    if (mon->frame_rotation & 1) {
+        std::swap(nw, nh);
+    }
+
+    int x, y, w, h;
+    int rw, rh;
+    SDL_GetRendererOutputSize(mon->renderer, &rw, &rh);
+    SDL_GetWindowSize(mon->window, &w, &h);
+    nw = nw * sx * w / rw;
+    nh = nh * sy * h / rh;
+    SDL_GetWindowPosition(mon->window, &x, &y);
+    SDL_SetWindowSize(mon->window, nw, nh);
+    SDL_SetWindowPosition(mon->window, x + (w - nw) / 2, y + (h - nh) / 2);
+    mon->panel->sdl_invalidate();
+}
+
+void Panel_sdl::sdl_create(monitor_t *m)
+{
+    int flag = SDL_WINDOW_RESIZABLE | SDL_WINDOW_ALLOW_HIGHDPI;
+#if SDL_FULLSCREEN
+    flag |= SDL_WINDOW_FULLSCREEN;
+#endif
+
+    if (m->frame_width < _cfg.panel_width) {
+        m->frame_width = _cfg.panel_width;
+    }
+    if (m->frame_height < _cfg.panel_height) {
+        m->frame_height = _cfg.panel_height;
+    }
+
+    int window_width = m->frame_width * m->scaling_x;
+    int window_height = m->frame_height * m->scaling_y;
+    int scaling_x = m->scaling_x;
+    int scaling_y = m->scaling_y;
+    if (m->frame_rotation & 1) {
+        std::swap(window_width, window_height);
+        std::swap(scaling_x, scaling_y);
+    }
+
+    {
+        m->window = SDL_CreateWindow(_window_title, SDL_WINDOWPOS_UNDEFINED, SDL_WINDOWPOS_UNDEFINED, window_width, window_height,
+                                     flag); /*last param. SDL_WINDOW_BORDERLESS to hide borders*/
+    }
+    m->renderer = SDL_CreateRenderer(m->window, -1, SDL_RENDERER_ACCELERATED | SDL_RENDERER_PRESENTVSYNC);
+    m->texture =
+        SDL_CreateTexture(m->renderer, SDL_PIXELFORMAT_RGB24, SDL_TEXTUREACCESS_STREAMING, _cfg.panel_width, _cfg.panel_height);
+    SDL_SetTextureBlendMode(m->texture, SDL_BLENDMODE_NONE);
+
+    if (m->frame_image) {
+        // 枠画像用のサーフェイスを作成
+        auto sf = SDL_CreateRGBSurfaceFrom((void *)m->frame_image, m->frame_width, m->frame_height, 32, m->frame_width * 4,
+                                           0xFF000000, 0xFF0000, 0xFF00, 0xFF);
+        if (sf != nullptr) {
+            // 枠画像からテクスチャを作成
+            m->texture_frameimage = SDL_CreateTextureFromSurface(m->renderer, sf);
+            SDL_FreeSurface(sf);
+        }
+    }
+    SDL_SetTextureBlendMode(m->texture_frameimage, SDL_BLENDMODE_BLEND);
+    _update_scaling(m, scaling_x, scaling_y);
+}
+
+void Panel_sdl::sdl_update(void)
+{
+    if (monitor.renderer == nullptr) {
+        sdl_create(&monitor);
+    }
+
+    bool step_exec = _in_step_exec;
+
+    if (_texupdate_counter != _modified_counter) {
+        pixelcopy_t pc(nullptr, color_depth_t::rgb888_3Byte, _write_depth, false);
+        if (_write_depth == rgb565_2Byte) {
+            pc.fp_copy = pixelcopy_t::copy_rgb_fast<bgr888_t, swap565_t>;
+        } else if (_write_depth == rgb888_3Byte) {
+            pc.fp_copy = pixelcopy_t::copy_rgb_fast<bgr888_t, bgr888_t>;
+        } else if (_write_depth == rgb332_1Byte) {
+            pc.fp_copy = pixelcopy_t::copy_rgb_fast<bgr888_t, rgb332_t>;
+        } else if (_write_depth == grayscale_8bit) {
+            pc.fp_copy = pixelcopy_t::copy_rgb_fast<bgr888_t, grayscale_t>;
+        }
+
+        if (0 == SDL_LockMutex(_sdl_mutex)) {
+            _texupdate_counter = _modified_counter;
+            for (int y = 0; y < _cfg.panel_height; ++y) {
+                pc.src_x32 = 0;
+                pc.src_data = _lines_buffer[y];
+                pc.fp_copy(&_texturebuf[y * _cfg.panel_width], 0, _cfg.panel_width, &pc);
+            }
+            SDL_UnlockMutex(_sdl_mutex);
+            SDL_UpdateTexture(monitor.texture, nullptr, _texturebuf, _cfg.panel_width * sizeof(rgb888_t));
+        }
+    }
+
+    int angle = monitor.frame_angle;
+    int target = (monitor.frame_rotation) * 90;
+    angle = (((target * 4) + (angle * 4) + (angle < target ? 8 : 0)) >> 3);
+
+    if (monitor.frame_angle != angle) { // 表示する向きを変える
+        monitor.frame_angle = angle;
+        sdl_invalidate();
+    } else if (monitor.frame_rotation & ~3u) {
+        monitor.frame_rotation &= 3;
+        monitor.frame_angle = (monitor.frame_rotation) * 90;
+        sdl_invalidate();
+    }
+
+    if (_invalidated || (_display_counter != _texupdate_counter)) {
+        SDL_RendererInfo info;
+        if (0 == SDL_GetRendererInfo(monitor.renderer, &info)) {
+            // ステップ実行中はVSYNCを待機しない
+            if (((bool)(info.flags & SDL_RENDERER_PRESENTVSYNC)) == step_exec) {
+                SDL_RenderSetVSync(monitor.renderer, !step_exec);
+            }
+        }
+        {
+            int red = 0;
+            int green = 0;
+            int blue = 0;
+#if defined(M5GFX_BACK_COLOR)
+            red = ((M5GFX_BACK_COLOR) >> 16) & 0xFF;
+            green = ((M5GFX_BACK_COLOR) >> 8) & 0xFF;
+            blue = ((M5GFX_BACK_COLOR)) & 0xFF;
+#endif
+            SDL_SetRenderDrawColor(monitor.renderer, red, green, blue, 0xFF);
+        }
+        SDL_RenderClear(monitor.renderer);
+        if (_invalidated) {
+            _invalidated = false;
+            int mw, mh;
+            SDL_GetRendererOutputSize(monitor.renderer, &mw, &mh);
+        }
+        render_texture(monitor.texture, monitor.frame_inner_x, monitor.frame_inner_y, _cfg.panel_width, _cfg.panel_height, angle);
+        render_texture(monitor.texture_frameimage, 0, 0, monitor.frame_width, monitor.frame_height, angle);
+        SDL_RenderPresent(monitor.renderer);
+        _display_counter = _texupdate_counter;
+        if (_invalidated) {
+            _invalidated = false;
+            SDL_SetRenderDrawColor(monitor.renderer, 0, 0, 0, 0xFF);
+            SDL_RenderClear(monitor.renderer);
+            render_texture(monitor.texture, monitor.frame_inner_x, monitor.frame_inner_y, _cfg.panel_width, _cfg.panel_height,
+                           angle);
+            render_texture(monitor.texture_frameimage, 0, 0, monitor.frame_width, monitor.frame_height, angle);
+            SDL_RenderPresent(monitor.renderer);
+        }
+    }
+}
+
+void Panel_sdl::render_texture(SDL_Texture *texture, int tx, int ty, int tw, int th, float angle)
+{
+    SDL_Point pivot;
+    pivot.x = (monitor.frame_width / 2.0f - tx) * (float)monitor.scaling_x;
+    pivot.y = (monitor.frame_height / 2.0f - ty) * (float)monitor.scaling_y;
+    SDL_Rect dstrect;
+    dstrect.w = tw * monitor.scaling_x;
+    dstrect.h = th * monitor.scaling_y;
+    int mw, mh;
+    SDL_GetRendererOutputSize(monitor.renderer, &mw, &mh);
+    dstrect.x = mw / 2.0f - pivot.x;
+    dstrect.y = mh / 2.0f - pivot.y;
+    SDL_RenderCopyEx(monitor.renderer, texture, nullptr, &dstrect, angle, &pivot, SDL_RendererFlip::SDL_FLIP_NONE);
+}
+
+bool Panel_sdl::initFrameBuffer(size_t width, size_t height)
+{
+    uint8_t **lineArray = (uint8_t **)heap_alloc_dma(height * sizeof(uint8_t *));
+    if (nullptr == lineArray) {
+        return false;
+    }
+
+    _texturebuf = (rgb888_t *)heap_alloc_dma(width * height * sizeof(rgb888_t));
+
+    /// 8byte alignment;
+    width = (width + 7) & ~7u;
+
+    _lines_buffer = lineArray;
+    memset(lineArray, 0, height * sizeof(uint8_t *));
+
+    uint8_t *framebuffer = (uint8_t *)heap_alloc_dma(width * height + 16);
+
+    auto fb = framebuffer;
+    {
+        for (size_t y = 0; y < height; ++y) {
+            lineArray[y] = fb;
+            fb += width;
+        }
+    }
+    return true;
+}
+
+void Panel_sdl::deinitFrameBuffer(void)
+{
+    auto lines = _lines_buffer;
+    _lines_buffer = nullptr;
+    if (lines != nullptr) {
+        heap_free(lines[0]);
+        heap_free(lines);
+    }
+    if (_texturebuf) {
+        heap_free(_texturebuf);
+        _texturebuf = nullptr;
+    }
+}
+
+//----------------------------------------------------------------------------
+} // namespace v1
+} // namespace lgfx
+
+#endif

src/graphics/Panel_sdl.hpp

@@ -0,0 +1,166 @@
+/*----------------------------------------------------------------------------/
+  Lovyan GFX - Graphics library for embedded devices.
+
+Original Source:
+ https://github.com/lovyan03/LovyanGFX/
+
+Licence:
+ [FreeBSD](https://github.com/lovyan03/LovyanGFX/blob/master/license.txt)
+
+Author:
+ [lovyan03](https://twitter.com/lovyan03)
+
+Contributors:
+ [ciniml](https://github.com/ciniml)
+ [mongonta0716](https://github.com/mongonta0716)
+ [tobozo](https://github.com/tobozo)
+
+Porting for SDL:
+ [imliubo](https://github.com/imliubo)
+/----------------------------------------------------------------------------*/
+#pragma once
+
+#define SDL_MAIN_HANDLED
+// cppcheck-suppress preprocessorErrorDirective
+#if __has_include(<SDL2/SDL.h>)
+#include <SDL2/SDL.h>
+#include <SDL2/SDL_main.h>
+#elif __has_include(<SDL.h>)
+#include <SDL.h>
+#include <SDL_main.h>
+#endif
+
+#if defined(SDL_h_)
+#include "lgfx/v1/Touch.hpp"
+#include "lgfx/v1/misc/range.hpp"
+#include "lgfx/v1/panel/Panel_FrameBufferBase.hpp"
+#include <cstdint>
+
+namespace lgfx
+{
+inline namespace v1
+{
+
+struct Panel_sdl;
+struct monitor_t {
+    SDL_Window *window = nullptr;
+    SDL_Renderer *renderer = nullptr;
+    SDL_Texture *texture = nullptr;
+    SDL_Texture *texture_frameimage = nullptr;
+    Panel_sdl *panel = nullptr;
+
+    // 外枠
+    const void *frame_image = 0;
+    uint_fast16_t frame_width = 0;
+    uint_fast16_t frame_height = 0;
+    uint_fast16_t frame_inner_x = 0;
+    uint_fast16_t frame_inner_y = 0;
+    int_fast16_t frame_rotation = 0;
+    int_fast16_t frame_angle = 0;
+
+    float scaling_x = 1;
+    float scaling_y = 1;
+    int_fast16_t touch_x, touch_y;
+    bool touched = false;
+    bool closing = false;
+};
+//----------------------------------------------------------------------------
+
+struct Touch_sdl : public ITouch {
+    bool init(void) override { return true; }
+    void wakeup(void) override {}
+    void sleep(void) override {}
+    bool isEnable(void) override { return true; };
+    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override { return 0; }
+};
+
+//----------------------------------------------------------------------------
+
+struct Panel_sdl : public Panel_FrameBufferBase {
+    static constexpr size_t EMULATED_GPIO_MAX = 128;
+    static volatile uint8_t _gpio_dummy_values[EMULATED_GPIO_MAX];
+
+  public:
+    Panel_sdl(void);
+    virtual ~Panel_sdl(void);
+
+    bool init(bool use_reset) override;
+
+    color_depth_t setColorDepth(color_depth_t depth) override;
+
+    void display(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h) override;
+
+    // void setInvert(bool invert) override {}
+    void drawPixelPreclipped(uint_fast16_t x, uint_fast16_t y, uint32_t rawcolor) override;
+    void writeFillRectPreclipped(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, uint32_t rawcolor) override;
+    void writeBlock(uint32_t rawcolor, uint32_t length) override;
+    void writeImage(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, pixelcopy_t *param,
+                    bool use_dma) override;
+    void writeImageARGB(uint_fast16_t x, uint_fast16_t y, uint_fast16_t w, uint_fast16_t h, pixelcopy_t *param) override;
+    void writePixels(pixelcopy_t *param, uint32_t len, bool use_dma) override;
+
+    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override;
+
+    void setWindowTitle(const char *title);
+    void setScaling(uint_fast8_t scaling_x, uint_fast8_t scaling_y);
+    void setFrameImage(const void *frame_image, int frame_width, int frame_height, int inner_x, int inner_y);
+    void setFrameRotation(uint_fast16_t frame_rotaion);
+    void setBrightness(uint8_t brightness) override{};
+
+    static volatile void gpio_hi(uint32_t pin) { _gpio_dummy_values[pin & (EMULATED_GPIO_MAX - 1)] = 1; }
+    static volatile void gpio_lo(uint32_t pin) { _gpio_dummy_values[pin & (EMULATED_GPIO_MAX - 1)] = 0; }
+    static volatile bool gpio_in(uint32_t pin) { return _gpio_dummy_values[pin & (EMULATED_GPIO_MAX - 1)]; }
+
+    static int setup(void);
+    static int loop(void);
+    static int close(void);
+
+    static int main(int (*fn)(bool *), uint32_t msec_step_exec = 512);
+
+    static void setShortcutKeymod(SDL_Keymod keymod) { _keymod = keymod; }
+
+    struct KeyCodeMapping_t {
+        SDL_KeyCode keycode = SDLK_UNKNOWN;
+        uint8_t gpio = 0;
+    };
+    static void addKeyCodeMapping(SDL_KeyCode keyCode, uint8_t gpio);
+    static int getKeyCodeMapping(SDL_KeyCode keyCode);
+
+  protected:
+    const char *_window_title = "LGFX Simulator";
+    SDL_mutex *_sdl_mutex = nullptr;
+
+    void sdl_create(monitor_t *m);
+    void sdl_update(void);
+
+    touch_point_t _touch_point;
+    monitor_t monitor;
+
+    rgb888_t *_texturebuf = nullptr;
+    uint_fast16_t _modified_counter;
+    uint_fast16_t _texupdate_counter;
+    uint_fast16_t _display_counter;
+    bool _invalidated;
+
+    static void _event_proc(void);
+    static void _update_proc(void);
+    static void _update_scaling(monitor_t *m, float sx, float sy);
+    void sdl_invalidate(void) { _invalidated = true; }
+    void render_texture(SDL_Texture *texture, int tx, int ty, int tw, int th, float angle);
+    bool initFrameBuffer(size_t width, size_t height);
+    void deinitFrameBuffer(void);
+
+    static SDL_Keymod _keymod;
+
+    struct lock_t {
+        lock_t(Panel_sdl *parent);
+        ~lock_t();
+
+      protected:
+        Panel_sdl *_parent;
+    };
+};
+//----------------------------------------------------------------------------
+} // namespace v1
+} // namespace lgfx
+#endif

src/graphics/Screen.cpp

@@ -25,6 +25,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "PowerMon.h"
 #include "Throttle.h"
 #include "configuration.h"
+#include "meshUtils.h"
 #if HAS_SCREEN
 #include <OLEDDisplay.h>
 
@@ -58,7 +59,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "mesh-pb-constants.h"
 #include "mesh/Channels.h"
 #include "mesh/generated/meshtastic/deviceonly.pb.h"
-#include "meshUtils.h"
 #include "modules/ExternalNotificationModule.h"
 #include "modules/TextMessageModule.h"
 #include "modules/WaypointModule.h"
@@ -83,6 +83,11 @@ extern uint16_t TFT_MESH;
 #include "platform/portduino/PortduinoGlue.h"
 #endif
 
+#if defined(T_LORA_PAGER)
+// KB backlight control
+#include "input/cardKbI2cImpl.h"
+#endif
+
 using namespace meshtastic; /** @todo remove */
 
 namespace graphics
@@ -95,7 +100,7 @@ namespace graphics
 #define NUM_EXTRA_FRAMES 3 // text message and debug frame
 // if defined a pixel will blink to show redraws
 // #define SHOW_REDRAWS
-
+#define ASCII_BELL '\x07'
 // A text message frame + debug frame + all the node infos
 FrameCallback *normalFrames;
 static uint32_t targetFramerate = IDLE_FRAMERATE;
@@ -355,8 +360,16 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
+#elif defined(USE_SPISSD1306)
+    dispdev = new SSD1306Spi(SSD1306_RESET, SSD1306_RS, SSD1306_NSS, GEOMETRY_64_48);
+    if (!dispdev->init()) {
+        LOG_DEBUG("Error: SSD1306 not detected!");
+    } else {
+        static_cast<SSD1306Spi *>(dispdev)->setHorizontalOffset(32);
+        LOG_INFO("SSD1306 init success");
+    }
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -370,7 +383,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif ARCH_PORTDUINO
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-        if (settingsMap[displayPanel] != no_screen) {
+        if (portduino_config.displayPanel != no_screen) {
             LOG_DEBUG("Make TFTDisplay!");
             dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                                      (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -430,7 +443,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             if (uiconfig.screen_brightness == 1)
                 digitalWrite(PIN_EINK_EN, HIGH);
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1)
+            if (uiconfig.screen_brightness > 0)
                 io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
 #endif
 
@@ -440,7 +453,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOn();
-#ifdef HELTEC_TRACKER_V1_X
+#if defined(HELTEC_TRACKER_V1_X) || defined(HELTEC_WIRELESS_TRACKER_V2)
             ui->init();
 #endif
 #ifdef USE_ST7789
@@ -545,7 +558,7 @@ void Screen::setup()
     // === Apply loaded brightness ===
 #if defined(ST7789_CS)
     static_cast<TFTDisplay *>(dispdev)->setDisplayBrightness(brightness);
-#elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
+#elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SPISSD1306)
     dispdev->setBrightness(brightness);
 #endif
     LOG_INFO("Applied screen brightness: %d", brightness);
@@ -588,11 +601,11 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
-#else
+#elif !defined(M5STACK_UNITC6L)
         dispdev->flipScreenVertically();
 #endif
     }
@@ -618,7 +631,7 @@ void Screen::setup()
 
 #if ARCH_PORTDUINO
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-        if (settingsMap[touchscreenModule]) {
+        if (portduino_config.touchscreenModule) {
             touchScreenImpl1 =
                 new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
             touchScreenImpl1->init();
@@ -647,6 +660,19 @@ void Screen::setup()
     MeshModule::observeUIEvents(&uiFrameEventObserver);
 }
 
+void Screen::setOn(bool on, FrameCallback einkScreensaver)
+{
+#if defined(T_LORA_PAGER)
+    if (cardKbI2cImpl)
+        cardKbI2cImpl->toggleBacklight(on);
+#endif
+    if (!on)
+        // We handle off commands immediately, because they might be called because the CPU is shutting down
+        handleSetOn(false, einkScreensaver);
+    else
+        enqueueCmd(ScreenCmd{.cmd = Cmd::SET_ON});
+}
+
 void Screen::forceDisplay(bool forceUiUpdate)
 {
     // Nasty hack to force epaper updates for 'key' frames.  FIXME, cleanup.
@@ -730,7 +756,11 @@ int32_t Screen::runOnce()
 
 #ifndef DISABLE_WELCOME_UNSET
     if (!NotificationRenderer::isOverlayBannerShowing() && config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
+#if defined(M5STACK_UNITC6L)
+        menuHandler::LoraRegionPicker();
+#else
         menuHandler::OnboardMessage();
+#endif
     }
 #endif
     if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0) {
@@ -941,71 +971,95 @@ void Screen::setFrames(FrameFocus focus)
     }
 
 #if defined(DISPLAY_CLOCK_FRAME)
+    if (!hiddenFrames.clock) {
         fsi.positions.clock = numframes;
+#if defined(M5STACK_UNITC6L)
+        normalFrames[numframes++] = graphics::ClockRenderer::drawAnalogClockFrame;
+#else
         normalFrames[numframes++] = uiconfig.is_clockface_analog ? graphics::ClockRenderer::drawAnalogClockFrame
                                                                  : graphics::ClockRenderer::drawDigitalClockFrame;
+#endif
         indicatorIcons.push_back(digital_icon_clock);
+    }
 #endif
 
     // Declare this early so it’s available in FOCUS_PRESERVE block
     bool willInsertTextMessage = shouldDrawMessage(&devicestate.rx_text_message);
 
+    if (!hiddenFrames.home) {
         fsi.positions.home = numframes;
         normalFrames[numframes++] = graphics::UIRenderer::drawDeviceFocused;
         indicatorIcons.push_back(icon_home);
+    }
 
     fsi.positions.textMessage = numframes;
     normalFrames[numframes++] = graphics::MessageRenderer::drawTextMessageFrame;
     indicatorIcons.push_back(icon_mail);
 
 #ifndef USE_EINK
+    if (!hiddenFrames.nodelist) {
         fsi.positions.nodelist = numframes;
         normalFrames[numframes++] = graphics::NodeListRenderer::drawDynamicNodeListScreen;
         indicatorIcons.push_back(icon_nodes);
+    }
 #endif
 
 // Show detailed node views only on E-Ink builds
 #ifdef USE_EINK
+    if (!hiddenFrames.nodelist_lastheard) {
         fsi.positions.nodelist_lastheard = numframes;
         normalFrames[numframes++] = graphics::NodeListRenderer::drawLastHeardScreen;
         indicatorIcons.push_back(icon_nodes);
-
+    }
+    if (!hiddenFrames.nodelist_hopsignal) {
         fsi.positions.nodelist_hopsignal = numframes;
         normalFrames[numframes++] = graphics::NodeListRenderer::drawHopSignalScreen;
         indicatorIcons.push_back(icon_signal);
-
+    }
+    if (!hiddenFrames.nodelist_distance) {
         fsi.positions.nodelist_distance = numframes;
         normalFrames[numframes++] = graphics::NodeListRenderer::drawDistanceScreen;
         indicatorIcons.push_back(icon_distance);
+    }
 #endif
 #if HAS_GPS
+    if (!hiddenFrames.nodelist_bearings) {
         fsi.positions.nodelist_bearings = numframes;
         normalFrames[numframes++] = graphics::NodeListRenderer::drawNodeListWithCompasses;
         indicatorIcons.push_back(icon_list);
-
+    }
+    if (!hiddenFrames.gps) {
         fsi.positions.gps = numframes;
         normalFrames[numframes++] = graphics::UIRenderer::drawCompassAndLocationScreen;
         indicatorIcons.push_back(icon_compass);
+    }
 #endif
-    if (RadioLibInterface::instance) {
+    if (RadioLibInterface::instance && !hiddenFrames.lora) {
         fsi.positions.lora = numframes;
         normalFrames[numframes++] = graphics::DebugRenderer::drawLoRaFocused;
         indicatorIcons.push_back(icon_radio);
     }
-    if (!dismissedFrames.memory) {
-        fsi.positions.memory = numframes;
-        normalFrames[numframes++] = graphics::DebugRenderer::drawMemoryUsage;
-        indicatorIcons.push_back(icon_memory);
+    if (!hiddenFrames.system) {
+        fsi.positions.system = numframes;
+        normalFrames[numframes++] = graphics::DebugRenderer::drawSystemScreen;
+        indicatorIcons.push_back(icon_system);
     }
 #if !defined(DISPLAY_CLOCK_FRAME)
+    if (!hiddenFrames.clock) {
         fsi.positions.clock = numframes;
         normalFrames[numframes++] = uiconfig.is_clockface_analog ? graphics::ClockRenderer::drawAnalogClockFrame
                                                                  : graphics::ClockRenderer::drawDigitalClockFrame;
         indicatorIcons.push_back(digital_icon_clock);
+    }
 #endif
+    if (!hiddenFrames.chirpy) {
+        fsi.positions.chirpy = numframes;
+        normalFrames[numframes++] = graphics::DebugRenderer::drawChirpy;
+        indicatorIcons.push_back(chirpy_small);
+    }
 
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
-    if (!dismissedFrames.wifi && isWifiAvailable()) {
+    if (!hiddenFrames.wifi && isWifiAvailable()) {
         fsi.positions.wifi = numframes;
         normalFrames[numframes++] = graphics::DebugRenderer::drawDebugInfoWiFiTrampoline;
         indicatorIcons.push_back(icon_wifi);
@@ -1047,6 +1101,7 @@ void Screen::setFrames(FrameFocus focus)
     if (numMeshNodes > 0)
         numMeshNodes--;
 
+    if (!hiddenFrames.show_favorites) {
         // Temporary array to hold favorite node frames
         std::vector<FrameCallback> favoriteFrames;
 
@@ -1069,6 +1124,7 @@ void Screen::setFrames(FrameFocus focus)
             fsi.positions.firstFavorite = 255;
             fsi.positions.lastFavorite = 255;
         }
+    }
 
     fsi.frameCount = numframes;   // Total framecount is used to apply FOCUS_PRESERVE
     this->frameCount = numframes; // ✅ Save frame count for use in custom overlay
@@ -1106,7 +1162,7 @@ void Screen::setFrames(FrameFocus focus)
         ui->switchToFrame(fsi.positions.clock);
         break;
     case FOCUS_SYSTEM:
-        ui->switchToFrame(fsi.positions.memory);
+        ui->switchToFrame(fsi.positions.system);
         break;
 
     case FOCUS_PRESERVE:
@@ -1134,30 +1190,101 @@ void Screen::setFrameImmediateDraw(FrameCallback *drawFrames)
     setFastFramerate();
 }
 
+void Screen::toggleFrameVisibility(const std::string &frameName)
+{
+#ifndef USE_EINK
+    if (frameName == "nodelist") {
+        hiddenFrames.nodelist = !hiddenFrames.nodelist;
+    }
+#endif
+#ifdef USE_EINK
+    if (frameName == "nodelist_lastheard") {
+        hiddenFrames.nodelist_lastheard = !hiddenFrames.nodelist_lastheard;
+    }
+    if (frameName == "nodelist_hopsignal") {
+        hiddenFrames.nodelist_hopsignal = !hiddenFrames.nodelist_hopsignal;
+    }
+    if (frameName == "nodelist_distance") {
+        hiddenFrames.nodelist_distance = !hiddenFrames.nodelist_distance;
+    }
+#endif
+#if HAS_GPS
+    if (frameName == "nodelist_bearings") {
+        hiddenFrames.nodelist_bearings = !hiddenFrames.nodelist_bearings;
+    }
+    if (frameName == "gps") {
+        hiddenFrames.gps = !hiddenFrames.gps;
+    }
+#endif
+    if (frameName == "lora") {
+        hiddenFrames.lora = !hiddenFrames.lora;
+    }
+    if (frameName == "clock") {
+        hiddenFrames.clock = !hiddenFrames.clock;
+    }
+    if (frameName == "show_favorites") {
+        hiddenFrames.show_favorites = !hiddenFrames.show_favorites;
+    }
+    if (frameName == "chirpy") {
+        hiddenFrames.chirpy = !hiddenFrames.chirpy;
+    }
+}
+
+bool Screen::isFrameHidden(const std::string &frameName) const
+{
+#ifndef USE_EINK
+    if (frameName == "nodelist")
+        return hiddenFrames.nodelist;
+#endif
+#ifdef USE_EINK
+    if (frameName == "nodelist_lastheard")
+        return hiddenFrames.nodelist_lastheard;
+    if (frameName == "nodelist_hopsignal")
+        return hiddenFrames.nodelist_hopsignal;
+    if (frameName == "nodelist_distance")
+        return hiddenFrames.nodelist_distance;
+#endif
+#if HAS_GPS
+    if (frameName == "nodelist_bearings")
+        return hiddenFrames.nodelist_bearings;
+    if (frameName == "gps")
+        return hiddenFrames.gps;
+#endif
+    if (frameName == "lora")
+        return hiddenFrames.lora;
+    if (frameName == "clock")
+        return hiddenFrames.clock;
+    if (frameName == "show_favorites")
+        return hiddenFrames.show_favorites;
+    if (frameName == "chirpy")
+        return hiddenFrames.chirpy;
+
+    return false;
+}
+
 // Dismisses the currently displayed screen frame, if possible
 // Relevant for text message, waypoint, others in future?
 // Triggered with a CardKB keycombo
-void Screen::dismissCurrentFrame()
+void Screen::hideCurrentFrame()
 {
     uint8_t currentFrame = ui->getUiState()->currentFrame;
     bool dismissed = false;
-
     if (currentFrame == framesetInfo.positions.textMessage && devicestate.has_rx_text_message) {
-        LOG_INFO("Dismiss Text Message");
+        LOG_INFO("Hide Text Message");
         devicestate.has_rx_text_message = false;
         memset(&devicestate.rx_text_message, 0, sizeof(devicestate.rx_text_message));
     } else if (currentFrame == framesetInfo.positions.waypoint && devicestate.has_rx_waypoint) {
-        LOG_DEBUG("Dismiss Waypoint");
+        LOG_DEBUG("Hide Waypoint");
         devicestate.has_rx_waypoint = false;
-        dismissedFrames.waypoint = true;
+        hiddenFrames.waypoint = true;
         dismissed = true;
     } else if (currentFrame == framesetInfo.positions.wifi) {
-        LOG_DEBUG("Dismiss WiFi Screen");
-        dismissedFrames.wifi = true;
+        LOG_DEBUG("Hide WiFi Screen");
+        hiddenFrames.wifi = true;
         dismissed = true;
-    } else if (currentFrame == framesetInfo.positions.memory) {
-        LOG_INFO("Dismiss Memory");
-        dismissedFrames.memory = true;
+    } else if (currentFrame == framesetInfo.positions.lora) {
+        LOG_INFO("Hide LoRa");
+        hiddenFrames.lora = true;
         dismissed = true;
     }
 
@@ -1190,7 +1317,8 @@ void Screen::blink()
         delay(50);
         count = count - 1;
     }
-    // The dispdev->setBrightness does not work for t-deck display, it seems to run the setBrightness function in OLEDDisplay.
+    // The dispdev->setBrightness does not work for t-deck display, it seems to run the setBrightness function in
+    // OLEDDisplay.
     dispdev->setBrightness(brightness);
 }
 
@@ -1278,6 +1406,10 @@ void Screen::handleShowNextFrame()
 
 void Screen::setFastFramerate()
 {
+#if defined(M5STACK_UNITC6L)
+    dispdev->clear();
+    dispdev->display();
+#endif
     // We are about to start a transition so speed up fps
     targetFramerate = SCREEN_TRANSITION_FRAMERATE;
 
@@ -1296,6 +1428,9 @@ int Screen::handleStatusUpdate(const meshtastic::Status *arg)
         }
         nodeDB->updateGUI = false;
         break;
+    case STATUS_TYPE_POWER:
+        forceDisplay(true);
+        break;
     }
 
     return 0;
@@ -1309,7 +1444,7 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             // Outgoing message (likely sent from phone)
             devicestate.has_rx_text_message = false;
             memset(&devicestate.rx_text_message, 0, sizeof(devicestate.rx_text_message));
-            dismissedFrames.textMessage = true;
+            hiddenFrames.textMessage = true;
             hasUnreadMessage = false; // Clear unread state when user replies
 
             setFrames(FOCUS_PRESERVE); // Stay on same frame, silently update frame list
@@ -1326,36 +1461,61 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             }
             // === Prepare banner content ===
             const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
+            const meshtastic_Channel channel =
+                channels.getByIndex(packet->channel ? packet->channel : channels.getPrimaryIndex());
             const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;
 
             const char *msgRaw = reinterpret_cast<const char *>(packet->decoded.payload.bytes);
 
             char banner[256];
 
-            // Check for bell character in message to determine alert type
             bool isAlert = false;
+
+            if (moduleConfig.external_notification.alert_bell || moduleConfig.external_notification.alert_bell_vibra ||
+                moduleConfig.external_notification.alert_bell_buzzer)
+                // Check for bell character to determine if this message is an alert
                 for (size_t i = 0; i < packet->decoded.payload.size && i < 100; i++) {
-                if (msgRaw[i] == '\x07') {
+                    if (msgRaw[i] == ASCII_BELL) {
                         isAlert = true;
                         break;
                     }
                 }
 
+            // Unlike generic messages, alerts (when enabled via the ext notif module) ignore any
+            // 'mute' preferences set to any specific node or channel.
             if (isAlert) {
                 if (longName && longName[0]) {
                     snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
                 } else {
                     strcpy(banner, "Alert Received");
                 }
-            } else {
+                screen->showSimpleBanner(banner, 3000);
+            } else if (!channel.settings.has_module_settings || !channel.settings.module_settings.is_muted) {
                 if (longName && longName[0]) {
+#if defined(M5STACK_UNITC6L)
+                    strcpy(banner, "New Message");
+#else
                     snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
+#endif
+
                 } else {
                     strcpy(banner, "New Message");
                 }
+#if defined(M5STACK_UNITC6L)
+                screen->setOn(true);
+                screen->showSimpleBanner(banner, 1500);
+                if (config.device.buzzer_mode != meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY ||
+                    (isAlert && moduleConfig.external_notification.alert_bell_buzzer) ||
+                    (!isBroadcast(packet->to) && isToUs(packet))) {
+                    // Beep if not in DIRECT_MSG_ONLY mode or if in DIRECT_MSG_ONLY mode and either
+                    // - packet contains an alert and alert bell buzzer is enabled
+                    // - packet is a non-broadcast that is addressed to this node
+                    playLongBeep();
                 }
-
+#else
                 screen->showSimpleBanner(banner, 3000);
+#endif
+            }
         }
     }
 
@@ -1439,7 +1599,7 @@ int Screen::handleInputEvent(const InputEvent *event)
             } else if (event->inputEvent == INPUT_BROKER_SELECT) {
                 if (this->ui->getUiState()->currentFrame == framesetInfo.positions.home) {
                     menuHandler::homeBaseMenu();
-                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.memory) {
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.system) {
                     menuHandler::systemBaseMenu();
 #if HAS_GPS
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.gps && gps) {
@@ -1448,12 +1608,16 @@ int Screen::handleInputEvent(const InputEvent *event)
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.clock) {
                     menuHandler::clockMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.lora) {
-                    menuHandler::LoraRegionPicker();
+                    menuHandler::loraMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage) {
                     if (devicestate.rx_text_message.from) {
                         menuHandler::messageResponseMenu();
                     } else {
+#if defined(M5STACK_UNITC6L)
+                        menuHandler::textMessageMenu();
+#else
                         menuHandler::textMessageBaseMenu();
+#endif
                     }
                 } else if (framesetInfo.positions.firstFavorite != 255 &&
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&
@@ -1512,13 +1676,15 @@ bool shouldWakeOnReceivedMessage()
     /*
     The goal here is to determine when we do NOT wake up the screen on message received:
     - Any ext. notifications are turned on
-    - If role is not client / client_mute
+    - If role is not CLIENT / CLIENT_MUTE / CLIENT_HIDDEN / CLIENT_BASE
     - If the battery level is very low
     */
     if (moduleConfig.external_notification.enabled) {
         return false;
     }
-    if (!meshtastic_Config_DeviceConfig_Role_CLIENT && !meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE) {
+    if (!IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_CLIENT,
+                   meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE, meshtastic_Config_DeviceConfig_Role_CLIENT_HIDDEN,
+                   meshtastic_Config_DeviceConfig_Role_CLIENT_BASE)) {
         return false;
     }
     if (powerStatus && powerStatus->getBatteryChargePercent() < 10) {

src/graphics/Screen.h

@@ -81,6 +81,8 @@ class Screen
 #include <SSD1306Wire.h>
 #elif defined(USE_ST7789)
 #include <ST7789Spi.h>
+#elif defined(USE_SPISSD1306)
+#include <SSD1306Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>
@@ -257,15 +259,7 @@ class Screen : public concurrency::OSThread
     void setup();
 
     /// Turns the screen on/off. Optionally, pass a custom screensaver frame for E-Ink
-    void setOn(bool on, FrameCallback einkScreensaver = NULL)
-    {
-        if (!on)
-            // We handle off commands immediately, because they might be called because the CPU is shutting down
-            handleSetOn(false, einkScreensaver);
-        else
-            enqueueCmd(ScreenCmd{.cmd = Cmd::SET_ON});
-    }
-
+    void setOn(bool on, FrameCallback einkScreensaver = NULL);
     /**
      * Prepare the display for the unit going to the lowest power mode possible.  Most screens will just
      * poweroff, but eink screens will show a "I'm sleeping" graphic, possibly with a QR code
@@ -593,7 +587,11 @@ class Screen : public concurrency::OSThread
     void setSSLFrames();
 
     // Dismiss the currently focussed frame, if possible (e.g. text message, waypoint)
-    void dismissCurrentFrame();
+    void hideCurrentFrame();
+
+    // Menu-driven Show / Hide Toggle
+    void toggleFrameVisibility(const std::string &frameName);
+    bool isFrameHidden(const std::string &frameName) const;
 
 #ifdef USE_EINK
     /// Draw an image to remain on E-Ink display after screen off
@@ -655,7 +653,7 @@ class Screen : public concurrency::OSThread
             uint8_t settings = 255;
             uint8_t wifi = 255;
             uint8_t deviceFocused = 255;
-            uint8_t memory = 255;
+            uint8_t system = 255;
             uint8_t gps = 255;
             uint8_t home = 255;
             uint8_t textMessage = 255;
@@ -665,6 +663,7 @@ class Screen : public concurrency::OSThread
             uint8_t nodelist_distance = 255;
             uint8_t nodelist_bearings = 255;
             uint8_t clock = 255;
+            uint8_t chirpy = 255;
             uint8_t firstFavorite = 255;
             uint8_t lastFavorite = 255;
             uint8_t lora = 255;
@@ -673,12 +672,29 @@ class Screen : public concurrency::OSThread
         uint8_t frameCount = 0;
     } framesetInfo;
 
-    struct DismissedFrames {
+    struct hiddenFrames {
         bool textMessage = false;
         bool waypoint = false;
         bool wifi = false;
-        bool memory = false;
-    } dismissedFrames;
+        bool system = false;
+        bool home = false;
+        bool clock = false;
+#ifndef USE_EINK
+        bool nodelist = false;
+#endif
+#ifdef USE_EINK
+        bool nodelist_lastheard = false;
+        bool nodelist_hopsignal = false;
+        bool nodelist_distance = false;
+#endif
+#if HAS_GPS
+        bool nodelist_bearings = false;
+        bool gps = false;
+#endif
+        bool lora = false;
+        bool show_favorites = false;
+        bool chirpy = true;
+    } hiddenFrames;
 
     /// Try to start drawing ASAP
     void setFastFramerate();

src/graphics/ScreenFonts.h

@@ -73,12 +73,16 @@
 #endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS)) &&                                  \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
 #define FONT_MEDIUM FONT_LARGE_LOCAL // Height: 28
 #define FONT_LARGE FONT_LARGE_LOCAL  // Height: 28
+#elif defined(M5STACK_UNITC6L)
+#define FONT_SMALL FONT_SMALL_LOCAL  // Height: 13
+#define FONT_MEDIUM FONT_SMALL_LOCAL // Height: 13
+#define FONT_LARGE FONT_SMALL_LOCAL  // Height: 13
 #else
 #define FONT_SMALL FONT_SMALL_LOCAL   // Height: 13
 #define FONT_MEDIUM FONT_MEDIUM_LOCAL // Height: 19
@@ -99,3 +103,44 @@
 #define FONT_HEIGHT_SMALL _fontHeight(FONT_SMALL)
 #define FONT_HEIGHT_MEDIUM _fontHeight(FONT_MEDIUM)
 #define FONT_HEIGHT_LARGE _fontHeight(FONT_LARGE)
+
+// ============================================================================
+// FINAL OVERRIDE: Force TomThumb font
+// ============================================================================
+#ifdef DISPLAY_FORCE_TOMTHUMB_FONT
+
+#include "graphics/fonts/OLEDDisplayFontsTomThumb.h"
+
+// -----------------------------
+// Replace all Meshtastic fonts
+// -----------------------------
+#undef FONT_SMALL_LOCAL
+#undef FONT_MEDIUM_LOCAL
+#undef FONT_LARGE_LOCAL
+
+#undef FONT_SMALL
+#undef FONT_MEDIUM
+#undef FONT_LARGE
+
+#define FONT_SMALL_LOCAL TomThumb4x6
+#define FONT_MEDIUM_LOCAL TomThumb4x6
+#define FONT_LARGE_LOCAL TomThumb4x6
+
+#define FONT_SMALL TomThumb4x6
+#define FONT_MEDIUM TomThumb4x6
+#define FONT_LARGE TomThumb4x6
+
+// -------------------------------------------------------
+// Override the *line height used for spacing*, NOT glyphs
+// TomThumb is 6 px tall → we give it 11 px layout height
+// -------------------------------------------------------
+#undef FONT_HEIGHT_SMALL
+#undef FONT_HEIGHT_MEDIUM
+#undef FONT_HEIGHT_LARGE
+
+#define FONT_HEIGHT_SMALL 6
+#define FONT_HEIGHT_MEDIUM 6
+#define FONT_HEIGHT_LARGE 6
+
+#endif
+// ============================================================================

src/graphics/SharedUIDisplay.cpp

@@ -1,6 +1,11 @@
-#include "graphics/SharedUIDisplay.h"
+#include "configuration.h"
+#if HAS_SCREEN
+#include "MeshService.h"
 #include "RTC.h"
+#include "draw/NodeListRenderer.h"
 #include "graphics/ScreenFonts.h"
+#include "graphics/SharedUIDisplay.h"
+#include "graphics/draw/UIRenderer.h"
 #include "main.h"
 #include "meshtastic/config.pb.h"
 #include "power.h"
@@ -16,6 +21,10 @@ void determineResolution(int16_t screenheight, int16_t screenwidth)
         isHighResolution = true;
     }
 
+    if (screenwidth > 128 && screenheight <= 64) {
+        isHighResolution = false;
+    }
+
     // Special case for Heltec Wireless Tracker v1.1
     if (screenwidth == 160 && screenheight == 80) {
         isHighResolution = false;
@@ -53,7 +62,7 @@ void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w,
 // *************************
 // * Common Header Drawing *
 // *************************
-void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr, bool battery_only)
+void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr, bool force_no_invert, bool show_date)
 {
     constexpr int HEADER_OFFSET_Y = 1;
     y += HEADER_OFFSET_Y;
@@ -69,7 +78,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
     const int screenW = display->getWidth();
     const int screenH = display->getHeight();
 
-    if (!battery_only) {
+    if (!force_no_invert) {
         // === Inverted Header Background ===
         if (isInverted) {
             display->setColor(BLACK);
@@ -124,7 +133,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
 
     int batteryX = 1;
     int batteryY = HEADER_OFFSET_Y + 1;
-
+#if !defined(M5STACK_UNITC6L)
     // === Battery Icons ===
     if (usbPowered && !isCharging) { // This is a basic check to determine USB Powered is flagged but not charging
         batteryX += 1;
@@ -187,13 +196,28 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
     int timeStrWidth = display->getStringWidth("12:34"); // Default alignment
     int timeX = screenW - xOffset - timeStrWidth + 4;
 
-    if (rtc_sec > 0 && !battery_only) {
+    if (rtc_sec > 0) {
         // === Build Time String ===
         long hms = (rtc_sec % SEC_PER_DAY + SEC_PER_DAY) % SEC_PER_DAY;
         int hour = hms / SEC_PER_HOUR;
         int minute = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
         snprintf(timeStr, sizeof(timeStr), "%d:%02d", hour, minute);
 
+        // === Build Date String ===
+        char datetimeStr[25];
+        UIRenderer::formatDateTime(datetimeStr, sizeof(datetimeStr), rtc_sec, display, false);
+        char dateLine[40];
+
+        if (isHighResolution) {
+            snprintf(dateLine, sizeof(dateLine), "%s", datetimeStr);
+        } else {
+            if (hasUnreadMessage) {
+                snprintf(dateLine, sizeof(dateLine), "%s", &datetimeStr[5]);
+            } else {
+                snprintf(dateLine, sizeof(dateLine), "%s", &datetimeStr[2]);
+            }
+        }
+
         if (config.display.use_12h_clock) {
             bool isPM = hour >= 12;
             hour %= 12;
@@ -202,7 +226,11 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             snprintf(timeStr, sizeof(timeStr), "%d:%02d%s", hour, minute, isPM ? "p" : "a");
         }
 
+        if (show_date) {
+            timeStrWidth = display->getStringWidth(dateLine);
+        } else {
             timeStrWidth = display->getStringWidth(timeStr);
+        }
         timeX = screenW - xOffset - timeStrWidth + 3;
 
         // === Show Mail or Mute Icon to the Left of Time ===
@@ -229,7 +257,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
                 int iconW = 16, iconH = 12;
                 int iconX = iconRightEdge - iconW;
                 int iconY = textY + (FONT_HEIGHT_SMALL - iconH) / 2 - 1;
-                if (isInverted) {
+                if (isInverted && !force_no_invert) {
                     display->setColor(WHITE);
                     display->fillRect(iconX - 1, iconY - 1, iconW + 3, iconH + 2);
                     display->setColor(BLACK);
@@ -244,7 +272,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             } else {
                 int iconX = iconRightEdge - (mail_width - 2);
                 int iconY = textY + (FONT_HEIGHT_SMALL - mail_height) / 2;
-                if (isInverted) {
+                if (isInverted && !force_no_invert) {
                     display->setColor(WHITE);
                     display->fillRect(iconX - 1, iconY - 1, mail_width + 2, mail_height + 2);
                     display->setColor(BLACK);
@@ -260,7 +288,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
                 int iconX = iconRightEdge - mute_symbol_big_width;
                 int iconY = textY + (FONT_HEIGHT_SMALL - mute_symbol_big_height) / 2;
 
-                if (isInverted) {
+                if (isInverted && !force_no_invert) {
                     display->setColor(WHITE);
                     display->fillRect(iconX - 1, iconY - 1, mute_symbol_big_width + 2, mute_symbol_big_height + 2);
                     display->setColor(BLACK);
@@ -287,10 +315,17 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             }
         }
 
+        if (show_date) {
+            // === Draw Date ===
+            display->drawString(timeX, textY, dateLine);
+            if (isBold)
+                display->drawString(timeX - 1, textY, dateLine);
+        } else {
             // === Draw Time ===
             display->drawString(timeX, textY, timeStr);
             if (isBold)
                 display->drawString(timeX - 1, textY, timeStr);
+        }
 
     } else {
         // === No Time Available: Mail/Mute Icon Moves to Far Right ===
@@ -337,7 +372,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             }
         }
     }
-
+#endif
     display->setColor(WHITE); // Reset for other UI
 }
 
@@ -345,6 +380,17 @@ const int *getTextPositions(OLEDDisplay *display)
 {
     static int textPositions[7]; // Static array that persists beyond function scope
 
+#ifdef DISPLAY_FORCE_TOMTHUMB_FONT
+    textPositions[0] = textZeroLine;
+    textPositions[1] = textFirstLine_tiny;
+    textPositions[2] = textSecondLine_tiny;
+    textPositions[3] = textThirdLine_tiny;
+    textPositions[4] = textFourthLine_tiny;
+    textPositions[5] = textFifthLine_tiny;
+    textPositions[6] = textSixthLine_tiny;
+    return textPositions;
+#endif
+
     if (isHighResolution) {
         textPositions[0] = textZeroLine;
         textPositions[1] = textFirstLine_medium;
@@ -365,6 +411,43 @@ const int *getTextPositions(OLEDDisplay *display)
     return textPositions;
 }
 
+// *************************
+// * Common Footer Drawing *
+// *************************
+void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y)
+{
+    bool drawConnectionState = false;
+    if (service->api_state == service->STATE_BLE || service->api_state == service->STATE_WIFI ||
+        service->api_state == service->STATE_SERIAL || service->api_state == service->STATE_PACKET ||
+        service->api_state == service->STATE_HTTP || service->api_state == service->STATE_ETH) {
+        drawConnectionState = true;
+    }
+
+    if (drawConnectionState) {
+        if (isHighResolution) {
+            const int scale = 2;
+            const int bytesPerRow = (connection_icon_width + 7) / 8;
+            int iconX = 0;
+            int iconY = SCREEN_HEIGHT - (connection_icon_height * 2);
+
+            for (int yy = 0; yy < connection_icon_height; ++yy) {
+                const uint8_t *rowPtr = connection_icon + yy * bytesPerRow;
+                for (int xx = 0; xx < connection_icon_width; ++xx) {
+                    const uint8_t byteVal = pgm_read_byte(rowPtr + (xx >> 3));
+                    const uint8_t bitMask = 1U << (xx & 7); // XBM is LSB-first
+                    if (byteVal & bitMask) {
+                        display->fillRect(iconX + xx * scale, iconY + yy * scale, scale, scale);
+                    }
+                }
+            }
+
+        } else {
+            display->drawXbm(0, SCREEN_HEIGHT - connection_icon_height, connection_icon_width, connection_icon_height,
+                             connection_icon);
+        }
+    }
+}
+
 bool isAllowedPunctuation(char c)
 {
     const std::string allowed = ".,!?;:-_()[]{}'\"@#$/\\&+=%~^ ";
@@ -392,3 +475,4 @@ std::string sanitizeString(const std::string &input)
 }
 
 } // namespace graphics
+#endif

src/graphics/SharedUIDisplay.h

@@ -35,6 +35,21 @@ namespace graphics
 #define textFifthLine_large (textFourthLine_large + (FONT_HEIGHT_SMALL + 5))
 #define textSixthLine_large (textFifthLine_large + (FONT_HEIGHT_SMALL + 5))
 
+// Tiny Font Spacing (TomThumb)
+// Only active when DISPLAY_FORCE_TOMTHUMB_FONT is defined
+#ifdef DISPLAY_FORCE_TOMTHUMB_FONT
+
+#define TINY_REDUCE 5
+
+#define textFirstLine_tiny (FONT_HEIGHT_SMALL + 1)
+#define textSecondLine_tiny (textFirstLine_tiny + (FONT_HEIGHT_SMALL - TINY_REDUCE + 5))
+#define textThirdLine_tiny (textSecondLine_tiny + (FONT_HEIGHT_SMALL - TINY_REDUCE + 5))
+#define textFourthLine_tiny (textThirdLine_tiny + (FONT_HEIGHT_SMALL - TINY_REDUCE + 5))
+#define textFifthLine_tiny (textFourthLine_tiny + (FONT_HEIGHT_SMALL - TINY_REDUCE + 5))
+#define textSixthLine_tiny (textFifthLine_tiny + (FONT_HEIGHT_SMALL - TINY_REDUCE + 5))
+
+#endif
+
 // Quick screen access
 #define SCREEN_WIDTH display->getWidth()
 #define SCREEN_HEIGHT display->getHeight()
@@ -49,7 +64,11 @@ void determineResolution(int16_t screenheight, int16_t screenwidth);
 void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w, int16_t h, int16_t r);
 
 // Shared battery/time/mail header
-void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr = "", bool battery_only = false);
+void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr = "", bool force_no_invert = false,
+                      bool show_date = false);
+
+// Shared battery/time/mail header
+void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y);
 
 const int *getTextPositions(OLEDDisplay *display);
 

src/graphics/TFTDisplay.cpp

@@ -422,7 +422,54 @@ static LGFX *tft = nullptr;
 
 #elif defined(ST7789_CS)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+#ifdef HELTEC_V4_TFT
+#include "chsc6x.h"
+#include "lgfx/v1/Touch.hpp"
+namespace lgfx
+{
+ inline namespace v1
+ {
+class TOUCH_CHSC6X : public ITouch
+{
+public:
+    TOUCH_CHSC6X(void)
+    {
+      _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+      _cfg.x_min = 0;
+      _cfg.x_max = 240;
+      _cfg.y_min = 0;
+      _cfg.y_max = 320;
+    };
 
+    bool init(void) override {
+        if(chsc6xTouch==nullptr) {
+            chsc6xTouch=new chsc6x(&Wire1,TOUCH_SDA_PIN,TOUCH_SCL_PIN,TOUCH_INT_PIN,TOUCH_RST_PIN);
+        }
+        chsc6xTouch->chsc6x_init();
+        return true;
+    };
+
+    uint_fast8_t getTouchRaw(touch_point_t* tp, uint_fast8_t count) override {
+        uint16_t raw_x,raw_y;
+        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y)==0) {
+            tp[0].x = 320-1-raw_y;
+            tp[0].y = 240-1-raw_x ;
+            tp[0].size = 1;
+            tp[0].id = 1;
+            return 1;
+        }
+        tp[0].size = 0;
+        return 0;
+    };
+
+    void wakeup(void) override {};
+    void sleep(void) override {};
+  private:
+    chsc6x *chsc6xTouch=nullptr;
+  };
+}
+}
+#endif
 class LGFX : public lgfx::LGFX_Device
 {
     lgfx::Panel_ST7789 _panel_instance;
@@ -431,6 +478,8 @@ class LGFX : public lgfx::LGFX_Device
 #if HAS_TOUCHSCREEN
 #if defined(T_WATCH_S3) || defined(ELECROW)
     lgfx::Touch_FT5x06 _touch_instance;
+#elif defined(HELTEC_V4_TFT)
+    lgfx::TOUCH_CHSC6X _touch_instance;
 #else
     lgfx::Touch_GT911 _touch_instance;
 #endif
@@ -465,8 +514,8 @@ class LGFX : public lgfx::LGFX_Device
             auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
 
             cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = -1;       // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = -1;      // Pin number where BUSY is connected (-1 = disable)
+            cfg.pin_rst = ST7789_RESET;       // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7789_BUSY;      // Pin number where BUSY is connected (-1 = disable)
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.
@@ -562,6 +611,91 @@ class LGFX : public lgfx::LGFX_Device
 
 static LGFX *tft = nullptr;
 
+#elif defined(ST7796_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7796 driver chip
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7796 _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // SPI
+            cfg.spi_host = ST7796_SPI_HOST;
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;
+            cfg.use_lock = true;               // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                               // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = ST7796_SCK;         // Set SPI SCLK pin number
+            cfg.pin_mosi = ST7796_SDA;         // Set SPI MOSI pin number
+            cfg.pin_miso = ST7796_MISO;        // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = ST7796_RS;            // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = ST7796_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7796_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7796_BUSY; // Pin number where BUSY is connected (-1 = disable)
+
+            // cfg.memory_width = TFT_WIDTH;              // Maximum width supported by the driver IC
+            // cfg.memory_height = TFT_HEIGHT;            // Maximum height supported by the driver IC
+            cfg.panel_width = TFT_WIDTH;                  // actual displayable width
+            cfg.panel_height = TFT_HEIGHT;                // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;                  // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;                  // Panel offset amount in Y direction
+            cfg.offset_rotation = TFT_OFFSET_ROTATION;    // Rotation direction value offset 0~7 (4~7 is mirrored)
+#ifdef TFT_DUMMY_READ_PIXELS
+            cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
+#else
+            cfg.dummy_read_pixel = 8; // Number of bits for dummy read before pixel readout
+#endif
+            cfg.dummy_read_bits = 1;                      // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;                          // Set to true if data can be read
+            cfg.invert = true;                            // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;                        // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            _panel_instance.config(cfg);
+        }
+
+#ifdef ST7796_BL
+        // Set the backlight control. (delete if not necessary)
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+            cfg.pin_bl = ST7796_BL; // Pin number to which the backlight is connected
+            cfg.invert = false;     // true to invert the brightness of the backlight
+            cfg.freq = 44100;
+            cfg.pwm_channel = 7;
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+#endif
+
+        setPanel(&_panel_instance); // Sets the panel to use.
+    }
+};
+
+static LGFX *tft = nullptr;
+
 #elif defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER)
 
 #include <LovyanGFX.hpp> // Graphics and font library for ILI9341/ILI9342 driver chip
@@ -666,10 +800,8 @@ static LGFX *tft = nullptr;
 
 static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
 #elif ARCH_PORTDUINO
+#include "Panel_sdl.hpp"
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
-#if defined(LGFX_SDL)
-#include <lgfx/v1/platforms/sdl/Panel_sdl.hpp>
-#endif
 
 class LGFX : public lgfx::LGFX_Device
 {
@@ -682,26 +814,26 @@ class LGFX : public lgfx::LGFX_Device
 
     LGFX(void)
     {
-        if (settingsMap[displayPanel] == st7789)
+        if (portduino_config.displayPanel == st7789)
             _panel_instance = new lgfx::Panel_ST7789;
-        else if (settingsMap[displayPanel] == st7735)
+        else if (portduino_config.displayPanel == st7735)
             _panel_instance = new lgfx::Panel_ST7735;
-        else if (settingsMap[displayPanel] == st7735s)
+        else if (portduino_config.displayPanel == st7735s)
             _panel_instance = new lgfx::Panel_ST7735S;
-        else if (settingsMap[displayPanel] == st7796)
+        else if (portduino_config.displayPanel == st7796)
             _panel_instance = new lgfx::Panel_ST7796;
-        else if (settingsMap[displayPanel] == ili9341)
+        else if (portduino_config.displayPanel == ili9341)
             _panel_instance = new lgfx::Panel_ILI9341;
-        else if (settingsMap[displayPanel] == ili9342)
+        else if (portduino_config.displayPanel == ili9342)
             _panel_instance = new lgfx::Panel_ILI9342;
-        else if (settingsMap[displayPanel] == ili9488)
+        else if (portduino_config.displayPanel == ili9488)
             _panel_instance = new lgfx::Panel_ILI9488;
-        else if (settingsMap[displayPanel] == hx8357d)
+        else if (portduino_config.displayPanel == hx8357d)
             _panel_instance = new lgfx::Panel_HX8357D;
-#if defined(LGFX_SDL)
-        else if (settingsMap[displayPanel] == x11) {
+#if defined(SDL_h_)
+
+        else if (portduino_config.displayPanel == x11)
             _panel_instance = new lgfx::Panel_sdl;
-        }
 #endif
         else {
             _panel_instance = new lgfx::Panel_NULL;
@@ -710,61 +842,62 @@ class LGFX : public lgfx::LGFX_Device
 
         auto buscfg = _bus_instance.config();
         buscfg.spi_mode = 0;
-        buscfg.spi_host = settingsMap[displayspidev];
+        buscfg.spi_host = portduino_config.display_spi_dev_int;
 
-        buscfg.pin_dc = settingsMap[displayDC]; // Set SPI DC pin number (-1 = disable)
+        buscfg.pin_dc = portduino_config.displayDC.pin; // Set SPI DC pin number (-1 = disable)
 
         _bus_instance.config(buscfg); // applies the set value to the bus.
+        if (portduino_config.displayPanel != x11)
             _panel_instance->setBus(&_bus_instance); // set the bus on the panel.
 
         auto cfg = _panel_instance->config(); // Gets a structure for display panel settings.
-        LOG_DEBUG("Width: %d, Height: %d", settingsMap[displayWidth], settingsMap[displayHeight]);
-        cfg.pin_cs = settingsMap[displayCS]; // Pin number where CS is connected (-1 = disable)
-        cfg.pin_rst = settingsMap[displayReset];
-        if (settingsMap[displayRotate]) {
-            cfg.panel_width = settingsMap[displayHeight]; // actual displayable width
-            cfg.panel_height = settingsMap[displayWidth]; // actual displayable height
+        LOG_DEBUG("Width: %d, Height: %d", portduino_config.displayWidth, portduino_config.displayHeight);
+        cfg.pin_cs = portduino_config.displayCS.pin; // Pin number where CS is connected (-1 = disable)
+        cfg.pin_rst = portduino_config.displayReset.pin;
+        if (portduino_config.displayRotate) {
+            cfg.panel_width = portduino_config.displayHeight; // actual displayable width
+            cfg.panel_height = portduino_config.displayWidth; // actual displayable height
         } else {
-            cfg.panel_width = settingsMap[displayWidth];   // actual displayable width
-            cfg.panel_height = settingsMap[displayHeight]; // actual displayable height
+            cfg.panel_width = portduino_config.displayWidth;   // actual displayable width
+            cfg.panel_height = portduino_config.displayHeight; // actual displayable height
         }
-        cfg.offset_x = settingsMap[displayOffsetX];             // Panel offset amount in X direction
-        cfg.offset_y = settingsMap[displayOffsetY];             // Panel offset amount in Y direction
-        cfg.offset_rotation = settingsMap[displayOffsetRotate]; // Rotation direction value offset 0~7 (4~7 is mirrored)
-        cfg.invert = settingsMap[displayInvert];                // Set to true if the light/darkness of the panel is reversed
+        cfg.offset_x = portduino_config.displayOffsetX;             // Panel offset amount in X direction
+        cfg.offset_y = portduino_config.displayOffsetY;             // Panel offset amount in Y direction
+        cfg.offset_rotation = portduino_config.displayOffsetRotate; // Rotation direction value offset 0~7 (4~7 is mirrored)
+        cfg.invert = portduino_config.displayInvert;                // Set to true if the light/darkness of the panel is reversed
 
         _panel_instance->config(cfg);
 
         // Configure settings for touch  control.
-        if (settingsMap[touchscreenModule]) {
-            if (settingsMap[touchscreenModule] == xpt2046) {
+        if (portduino_config.touchscreenModule) {
+            if (portduino_config.touchscreenModule == xpt2046) {
                 _touch_instance = new lgfx::Touch_XPT2046;
-            } else if (settingsMap[touchscreenModule] == stmpe610) {
+            } else if (portduino_config.touchscreenModule == stmpe610) {
                 _touch_instance = new lgfx::Touch_STMPE610;
-            } else if (settingsMap[touchscreenModule] == ft5x06) {
+            } else if (portduino_config.touchscreenModule == ft5x06) {
                 _touch_instance = new lgfx::Touch_FT5x06;
             }
             auto touch_cfg = _touch_instance->config();
 
-            touch_cfg.pin_cs = settingsMap[touchscreenCS];
+            touch_cfg.pin_cs = portduino_config.touchscreenCS.pin;
             touch_cfg.x_min = 0;
-            touch_cfg.x_max = settingsMap[displayHeight] - 1;
+            touch_cfg.x_max = portduino_config.displayHeight - 1;
             touch_cfg.y_min = 0;
-            touch_cfg.y_max = settingsMap[displayWidth] - 1;
-            touch_cfg.pin_int = settingsMap[touchscreenIRQ];
+            touch_cfg.y_max = portduino_config.displayWidth - 1;
+            touch_cfg.pin_int = portduino_config.touchscreenIRQ.pin;
             touch_cfg.bus_shared = true;
-            touch_cfg.offset_rotation = settingsMap[touchscreenRotate];
-            if (settingsMap[touchscreenI2CAddr] != -1) {
-                touch_cfg.i2c_addr = settingsMap[touchscreenI2CAddr];
+            touch_cfg.offset_rotation = portduino_config.touchscreenRotate;
+            if (portduino_config.touchscreenI2CAddr != -1) {
+                touch_cfg.i2c_addr = portduino_config.touchscreenI2CAddr;
             } else {
-                touch_cfg.spi_host = settingsMap[touchscreenspidev];
+                touch_cfg.spi_host = portduino_config.touchscreen_spi_dev_int;
             }
 
             _touch_instance->config(touch_cfg);
             _panel_instance->setTouch(_touch_instance);
         }
-#if defined(LGFX_SDL)
-        if (settingsMap[displayPanel] == x11) {
+#if defined(SDL_h_)
+        if (portduino_config.displayPanel == x11) {
             lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)_panel_instance;
             sdl_panel_->setup();
             sdl_panel_->addKeyCodeMapping(SDLK_RETURN, SDL_SCANCODE_KP_ENTER);
@@ -997,8 +1130,9 @@ static LGFX *tft = nullptr;
 
 #endif
 
-#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) ||           \
+    defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) ||           \
+    (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -1029,10 +1163,10 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
     backlightEnable = p;
 
 #if ARCH_PORTDUINO
-    if (settingsMap[displayRotate]) {
-        setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayWidth], settingsMap[configNames::displayHeight]);
+    if (portduino_config.displayRotate) {
+        setGeometry(GEOMETRY_RAWMODE, portduino_config.displayWidth, portduino_config.displayWidth);
     } else {
-        setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayHeight], settingsMap[configNames::displayWidth]);
+        setGeometry(GEOMETRY_RAWMODE, portduino_config.displayHeight, portduino_config.displayHeight);
     }
 
 #elif defined(SCREEN_ROTATE)
@@ -1042,72 +1176,145 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
 #endif
 }
 
+TFTDisplay::~TFTDisplay()
+{
+    // Clean up allocated line pixel buffer to prevent memory leak
+    if (linePixelBuffer != nullptr) {
+        free(linePixelBuffer);
+        linePixelBuffer = nullptr;
+    }
+}
+
 // Write the buffer to the display memory
 void TFTDisplay::display(bool fromBlank)
 {
     if (fromBlank)
         tft->fillScreen(TFT_BLACK);
-    // tft->clear();
+
     concurrency::LockGuard g(spiLock);
 
-    uint16_t x, y;
+    uint32_t x, y;
+    uint32_t y_byteIndex;
+    uint8_t y_byteMask;
+    uint32_t x_FirstPixelUpdate;
+    uint32_t x_LastPixelUpdate;
+    bool isset, dblbuf_isset;
+    uint16_t colorTftMesh, colorTftBlack;
+    bool somethingChanged = false;
 
-    for (y = 0; y < displayHeight; y++) {
-        for (x = 0; x < displayWidth; x++) {
-            auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
+    // Store colors byte-reversed so that TFT_eSPI doesn't have to swap bytes in a separate step
+    colorTftMesh = (TFT_MESH >> 8) | ((TFT_MESH & 0xFF) << 8);
+    colorTftBlack = (TFT_BLACK >> 8) | ((TFT_BLACK & 0xFF) << 8);
+
+    y = 0;
+    while (y < displayHeight) {
+        y_byteIndex = (y / 8) * displayWidth;
+        y_byteMask = (1 << (y & 7));
+
+        // Step 1: Do a quick scan of 8 rows together. This allows fast-forwarding over unchanged screen areas.
+        if (y_byteMask == 1) {
             if (!fromBlank) {
-                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
-                auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
+                for (x = 0; x < displayWidth; x++) {
+                    if (buffer[x + y_byteIndex] != buffer_back[x + y_byteIndex])
+                        break;
+                }
+            } else {
+                for (x = 0; x < displayWidth; x++) {
+                    if (buffer[x + y_byteIndex] != 0)
+                        break;
+                }
+            }
+            if (x >= displayWidth) {
+                // No changed pixels found in these 8 rows, fast-forward to the next 8
+                y = y + 8;
+                continue;
+            }
+        }
+
+        // Step 2: Scan each of the 8 rows individually. Find the first pixel in each row that needs updating
+        for (x_FirstPixelUpdate = 0; x_FirstPixelUpdate < displayWidth; x_FirstPixelUpdate++) {
+            isset = buffer[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
+
+            if (!fromBlank) {
+                // get src pixel in the page based ordering the OLED lib uses
+                dblbuf_isset = buffer_back[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
                 if (isset != dblbuf_isset) {
-                    tft->drawPixel(x, y, isset ? TFT_MESH : TFT_BLACK);
+                    break;
                 }
             } else if (isset) {
-                tft->drawPixel(x, y, TFT_MESH);
+                break;
             }
         }
+
+        // Did we find a pixel that needs updating on this row?
+        if (x_FirstPixelUpdate < displayWidth) {
+
+            // Quickly write out the first changed pixel (saves another array lookup)
+            linePixelBuffer[x_FirstPixelUpdate] = isset ? colorTftMesh : colorTftBlack;
+            x_LastPixelUpdate = x_FirstPixelUpdate;
+
+            // Step 3: copy all remaining pixels in this row into the pixel line buffer,
+            // while also recording the last pixel in the row that needs updating
+            for (x = x_FirstPixelUpdate + 1; x < displayWidth; x++) {
+                isset = buffer[x + y_byteIndex] & y_byteMask;
+                linePixelBuffer[x] = isset ? colorTftMesh : colorTftBlack;
+
+                if (!fromBlank) {
+                    dblbuf_isset = buffer_back[x + y_byteIndex] & y_byteMask;
+                    if (isset != dblbuf_isset) {
+                        x_LastPixelUpdate = x;
+                    }
+                } else if (isset) {
+                    x_LastPixelUpdate = x;
+                }
+            }
+
+            // Step 4: Send the changed pixels on this line to the screen as a single block transfer.
+            // This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
+            tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
+                          &linePixelBuffer[x_FirstPixelUpdate]);
+
+            somethingChanged = true;
+        }
+        y++;
     }
     // Copy the Buffer to the Back Buffer
-    for (y = 0; y < (displayHeight / 8); y++) {
-        for (x = 0; x < displayWidth; x++) {
-            uint16_t pos = x + y * displayWidth;
-            buffer_back[pos] = buffer[pos];
-        }
-    }
+    if (somethingChanged)
+        memcpy(buffer_back, buffer, displayBufferSize);
 }
 
 void TFTDisplay::sdlLoop()
 {
-#if defined(LGFX_SDL)
+#if defined(SDL_h_)
     static int lastPressed = 0;
     static int shuttingDown = false;
-    if (settingsMap[displayPanel] == x11) {
+    if (portduino_config.displayPanel == x11) {
         lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)tft->_panel_instance;
         if (sdl_panel_->loop() && !shuttingDown) {
             LOG_WARN("Window Closed!");
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SHUTDOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
         }
-
         // debounce
-        if (lastPressed != 0 && !lgfx::v1::gpio_in(lastPressed))
+        if (lastPressed != 0 && !sdl_panel_->gpio_in(lastPressed))
             return;
-        if (!lgfx::v1::gpio_in(37)) {
+        if (!sdl_panel_->gpio_in(37)) {
             lastPressed = 37;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_RIGHT, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(36)) {
+        } else if (!sdl_panel_->gpio_in(36)) {
             lastPressed = 36;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_UP, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(38)) {
+        } else if (!sdl_panel_->gpio_in(38)) {
             lastPressed = 38;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_DOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(39)) {
+        } else if (!sdl_panel_->gpio_in(39)) {
             lastPressed = 39;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_LEFT, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(SDL_SCANCODE_KP_ENTER)) {
+        } else if (!sdl_panel_->gpio_in(SDL_SCANCODE_KP_ENTER)) {
             lastPressed = SDL_SCANCODE_KP_ENTER;
             InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SELECT, .kbchar = 0, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
@@ -1128,8 +1335,8 @@ void TFTDisplay::sendCommand(uint8_t com)
         backlightEnable->set(true);
 #if ARCH_PORTDUINO
         display(true);
-        if (settingsMap[displayBacklight] > 0)
-            digitalWrite(settingsMap[displayBacklight], TFT_BACKLIGHT_ON);
+        if (portduino_config.displayBacklight.pin > 0)
+            digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->wakeup();
         tft->powerSaveOff();
@@ -1152,8 +1359,8 @@ void TFTDisplay::sendCommand(uint8_t com)
         backlightEnable->set(false);
 #if ARCH_PORTDUINO
         tft->clear();
-        if (settingsMap[displayBacklight] > 0)
-            digitalWrite(settingsMap[displayBacklight], !TFT_BACKLIGHT_ON);
+        if (portduino_config.displayBacklight.pin > 0)
+            digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->sleep();
         tft->powerSaveOn();
@@ -1264,13 +1471,21 @@ bool TFTDisplay::connect()
     tft->setRotation(1); // T-Deck has the TFT in landscape
 #elif defined(T_WATCH_S3)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
-#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR)
+#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER)
     tft->setRotation(0); // use config.yaml to set rotation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
 #endif
     tft->fillScreen(TFT_BLACK);
 
+    if (this->linePixelBuffer == NULL) {
+        this->linePixelBuffer = (uint16_t *)malloc(sizeof(uint16_t) * displayWidth);
+
+        if (!this->linePixelBuffer) {
+            LOG_ERROR("Not enough memory to create TFT line buffer\n");
+            return false;
+        }
+    }
     return true;
 }
 

src/graphics/TFTDisplay.h

@@ -20,6 +20,9 @@ class TFTDisplay : public OLEDDisplay
     */
     TFTDisplay(uint8_t, int, int, OLEDDISPLAY_GEOMETRY, HW_I2C);
 
+    // Destructor to clean up allocated memory
+    ~TFTDisplay();
+
     // Write the buffer to the display memory
     virtual void display() override { display(false); };
     virtual void display(bool fromBlank);
@@ -58,4 +61,6 @@ class TFTDisplay : public OLEDDisplay
 
     // Connect to the display
     virtual bool connect() override;
+
+    uint16_t *linePixelBuffer = nullptr;
 };

src/graphics/VirtualKeyboard.cpp

@@ -1,5 +1,6 @@
-#include "VirtualKeyboard.h"
 #include "configuration.h"
+#if HAS_SCREEN
+#include "VirtualKeyboard.h"
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
@@ -736,3 +737,4 @@ bool VirtualKeyboard::isTimedOut() const
 }
 
 } // namespace graphics
+#endif

src/graphics/draw/ClockRenderer.cpp

@@ -8,6 +8,7 @@
 #include "gps/RTC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "graphics/draw/UIRenderer.h"
 #include "graphics/emotes.h"
 #include "graphics/images.h"
 #include "main.h"
@@ -190,19 +191,15 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     // === Set Title, Blank for Clock
     const char *titleStr = "";
     // === Header ===
-    graphics::drawCommonHeader(display, x, y, titleStr, true);
-
-#ifdef T_WATCH_S3
-    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
-        graphics::ClockRenderer::drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
-    }
-#endif
+    graphics::drawCommonHeader(display, x, y, titleStr, true, true);
+    int line = 0;
 
     uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
     char timeString[16];
     int hour = 0;
     int minute = 0;
     int second = 0;
+
     if (rtc_sec > 0) {
         long hms = rtc_sec % SEC_PER_DAY;
         hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
@@ -213,11 +210,11 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     bool isPM = hour >= 12;
-    // hour = hour > 12 ? hour - 12 : hour;
     if (config.display.use_12h_clock) {
         hour %= 12;
-        if (hour == 0)
+        if (hour == 0) {
             hour = 12;
+        }
         snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
     } else {
         snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
@@ -227,24 +224,56 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     char secondString[8];
     snprintf(secondString, sizeof(secondString), "%02d", second);
 
-#ifdef T_WATCH_S3
-    float scale = 1.5;
-#elif defined(CHATTER_2)
-    float scale = 1.1;
-#else
-    float scale = 0.75;
-    if (isHighResolution) {
-        scale = 1.5;
-    }
-#endif
+    static bool scaleInitialized = false;
+    static float scale = 0.75f;
+    static float segmentWidth = SEGMENT_WIDTH * 0.75f;
+    static float segmentHeight = SEGMENT_HEIGHT * 0.75f;
 
-    uint16_t segmentWidth = SEGMENT_WIDTH * scale;
-    uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
+    if (!scaleInitialized) {
+        float screenwidth_target_ratio = 0.80f; // Target 80% of display width (adjustable)
+        float max_scale = 3.5f;                 // Safety limit to avoid runaway scaling
+        float step = 0.05f;                     // Step increment per iteration
+
+        float target_width = display->getWidth() * screenwidth_target_ratio;
+        float target_height =
+            display->getHeight() -
+            (isHighResolution
+                 ? 46
+                 : 33); // Be careful adjusting this number, we have to account for header and the text under the time
+
+        float calculated_width_size = 0.0f;
+        float calculated_height_size = 0.0f;
+
+        while (true) {
+            segmentWidth = SEGMENT_WIDTH * scale;
+            segmentHeight = SEGMENT_HEIGHT * scale;
+
+            calculated_width_size = segmentHeight + ((segmentWidth + (segmentHeight * 2) + 4) * 4);
+            calculated_height_size = segmentHeight + ((segmentHeight + (segmentHeight * 2) + 4) * 2);
+
+            if (calculated_width_size >= target_width || calculated_height_size >= target_height || scale >= max_scale) {
+                break;
+            }
+
+            scale += step;
+        }
+
+        // If we overshot width, back off one step and recompute segment sizes
+        if (calculated_width_size > target_width || calculated_height_size > target_height) {
+            scale -= step;
+            segmentWidth = SEGMENT_WIDTH * scale;
+            segmentHeight = SEGMENT_HEIGHT * scale;
+        }
+
+        scaleInitialized = true;
+    }
+
+    size_t len = strlen(timeString);
 
     // calculate hours:minutes string width
-    uint16_t timeStringWidth = strlen(timeString) * 5;
+    uint16_t timeStringWidth = len * 5; // base spacing between characters
 
-    for (uint8_t i = 0; i < strlen(timeString); i++) {
+    for (size_t i = 0; i < len; i++) {
         char character = timeString[i];
 
         if (character == ':') {
@@ -255,19 +284,21 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     uint16_t hourMinuteTextX = (display->getWidth() / 2) - (timeStringWidth / 2);
-
     uint16_t startingHourMinuteTextX = hourMinuteTextX;
 
-    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2);
+    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2) + 2;
 
     // iterate over characters in hours:minutes string and draw segmented characters
-    for (uint8_t i = 0; i < strlen(timeString); i++) {
+    for (size_t i = 0; i < len; i++) {
         char character = timeString[i];
 
         if (character == ':') {
             drawSegmentedDisplayColon(display, hourMinuteTextX, hourMinuteTextY, scale);
 
             hourMinuteTextX += segmentHeight + 6;
+            if (scale >= 2.0f) {
+                hourMinuteTextX += (uint16_t)(4.5f * scale);
+            }
         } else {
             drawSegmentedDisplayCharacter(display, hourMinuteTextX, hourMinuteTextY, character - '0', scale);
 
@@ -277,33 +308,27 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
         hourMinuteTextX += 5;
     }
 
-    // draw seconds string
+    // draw seconds string + AM/PM
     display->setFont(FONT_SMALL);
     int xOffset = (isHighResolution) ? 0 : -1;
     if (hour >= 10) {
         xOffset += (isHighResolution) ? 32 : 18;
     }
-    int yOffset = (isHighResolution) ? 3 : 1;
-#ifdef SENSECAP_INDICATOR
-    yOffset -= 3;
-#endif
-#ifdef T_DECK
-    yOffset -= 5;
-#endif
+
     if (config.display.use_12h_clock) {
-        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
-                            isPM ? "pm" : "am");
+        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - 1, isPM ? "pm" : "am");
     }
+
 #ifndef USE_EINK
     xOffset = (isHighResolution) ? 18 : 10;
-    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - yOffset,
+    if (scale >= 2.0f) {
+        xOffset -= (int)(4.5f * scale);
+    }
+    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - 1,
                         secondString);
 #endif
-}
 
-void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y)
-{
-    display->drawFastImage(x, y, 18, 14, bluetoothConnectedIcon);
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // Draw an analog clock
@@ -313,13 +338,9 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // === Set Title, Blank for Clock
     const char *titleStr = "";
     // === Header ===
-    graphics::drawCommonHeader(display, x, y, titleStr, true);
+    graphics::drawCommonHeader(display, x, y, titleStr, true, true);
+    int line = 0;
 
-#ifdef T_WATCH_S3
-    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
-        drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
-    }
-#endif
     // clock face center coordinates
     int16_t centerX = display->getWidth() / 2;
     int16_t centerY = display->getHeight() / 2;
@@ -512,6 +533,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         display->drawLine(centerX, centerY, secondX, secondY);
 #endif
     }
+    graphics::drawCommonFooter(display, x, y);
 }
 
 } // namespace ClockRenderer

src/graphics/draw/ClockRenderer.h

@@ -24,7 +24,6 @@ void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int heig
 
 // UI elements for clock displays
 // void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode = true, float scale = 1);
-void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y);
 
 } // namespace ClockRenderer
 

src/graphics/draw/CompassRenderer.cpp

@@ -1,3 +1,5 @@
+#include "configuration.h"
+#if HAS_SCREEN
 #include "CompassRenderer.h"
 #include "NodeDB.h"
 #include "UIRenderer.h"
@@ -135,3 +137,4 @@ uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
 
 } // namespace CompassRenderer
 } // namespace graphics
+#endif

src/graphics/draw/DebugRenderer.cpp

@@ -3,6 +3,7 @@
 #include "../Screen.h"
 #include "DebugRenderer.h"
 #include "FSCommon.h"
+#include "MeshService.h"
 #include "NodeDB.h"
 #include "Throttle.h"
 #include "UIRenderer.h"
@@ -94,7 +95,8 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -106,7 +108,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) &&                                  \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -121,7 +123,8 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
     } else {
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -221,6 +224,8 @@ void drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, i
 
     display->drawString(x, getTextPositions(display)[line++], "URL: http://meshtastic.local");
 
+    graphics::drawCommonFooter(display, x, y);
+
     /* Display a heartbeat pixel that blinks every time the frame is redrawn */
 #ifdef SHOW_REDRAWS
     if (heartbeat)
@@ -261,12 +266,6 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
             display->drawString(x + 1, y, "USB");
     }
 
-    //    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, true);
-
-    //    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
-    //    if (config.display.heading_bold)
-    //        display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
-
     uint32_t currentMillis = millis();
     uint32_t seconds = currentMillis / 1000;
     uint32_t minutes = seconds / 60;
@@ -281,12 +280,13 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     std::string uptime = UIRenderer::drawTimeDelta(days, hours, minutes, seconds);
 
     // Line 1 (Still)
+#if !defined(M5STACK_UNITC6L)
     display->drawString(x + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
     if (config.display.heading_bold)
         display->drawString(x - 1 + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
 
     display->setColor(WHITE);
-
+#endif
     // Setup string to assemble analogClock string
     std::string analogClock = "";
 
@@ -333,8 +333,7 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 #if HAS_GPS
     if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
         // Line 3
-        if (config.display.gps_format !=
-            meshtastic_Config_DisplayConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
+        if (uiconfig.gps_format != meshtastic_DeviceUIConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
             UIRenderer::drawGpsAltitude(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
 
         // Line 4
@@ -390,31 +389,56 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     char shortnameble[35];
     getMacAddr(dmac);
     snprintf(screen->ourId, sizeof(screen->ourId), "%02x%02x", dmac[4], dmac[5]);
+#if defined(M5STACK_UNITC6L)
+    snprintf(shortnameble, sizeof(shortnameble), "%s", screen->ourId);
+#else
     snprintf(shortnameble, sizeof(shortnameble), "BLE: %s", screen->ourId);
+#endif
     int textWidth = display->getStringWidth(shortnameble);
     int nameX = (SCREEN_WIDTH - textWidth);
     display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
 
-    // === Second Row: Radio Preset ===
-    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
+    // === Second Row: Role ===
+    auto role = DisplayFormatters::getDeviceRole(config.device.role);
+    char device_role[25];
+    snprintf(device_role, sizeof(device_role), "Role: %s", role);
+    textWidth = display->getStringWidth(device_role);
+    nameX = (SCREEN_WIDTH - textWidth) / 2;
+    display->drawString(nameX, getTextPositions(display)[line++], device_role);
+
+    // === Third Row: Radio Preset ===
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
+
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
     if (region != nullptr) {
+#if defined(M5STACK_UNITC6L)
+        snprintf(regionradiopreset, sizeof(regionradiopreset), "%s", region);
+#else
         snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode);
+#endif
     }
     textWidth = display->getStringWidth(regionradiopreset);
     nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line++], regionradiopreset);
 
-    // === Third Row: Frequency / ChanNum ===
+    // === Fourth Row: Frequency / ChanNum ===
     char frequencyslot[35];
     char freqStr[16];
     float freq = RadioLibInterface::instance->getFreq();
     snprintf(freqStr, sizeof(freqStr), "%.3f", freq);
     if (config.lora.channel_num == 0) {
+#if defined(M5STACK_UNITC6L)
+        snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz", freqStr);
+#else
         snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %sMHz", freqStr);
+#endif
     } else {
+#if defined(M5STACK_UNITC6L)
+        snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz (%d)", freqStr, config.lora.channel_num);
+#else
         snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %sMHz (%d)", freqStr, config.lora.channel_num);
+#endif
     }
     size_t len = strlen(frequencyslot);
     if (len >= 4 && strcmp(frequencyslot + len - 4, " (0)") == 0) {
@@ -424,7 +448,8 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line++], frequencyslot);
 
-    // === Fourth Row: Channel Utilization ===
+#if !defined(M5STACK_UNITC6L)
+    // === Fifth Row: Channel Utilization ===
     const char *chUtil = "ChUtil:";
     char chUtilPercentage[10];
     snprintf(chUtilPercentage, sizeof(chUtilPercentage), "%2.0f%%", airTime->channelUtilizationPercent());
@@ -441,7 +466,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     int total_line_content_width = (chUtil_x + chutil_bar_width + display->getStringWidth(chUtilPercentage) + extraoffset) / 2;
     int starting_position = centerofscreen - total_line_content_width;
 
-    display->drawString(starting_position, getTextPositions(display)[line++], chUtil);
+    display->drawString(starting_position, getTextPositions(display)[line], chUtil);
 
     // Force 56% or higher to show a full 100% bar, text would still show related percent.
     if (chutil_percent >= 61) {
@@ -478,14 +503,16 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         display->fillRect(starting_position + chUtil_x, chUtil_y, fillRight, chutil_bar_height);
     }
 
-    display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[4],
+    display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[line++],
                         chUtilPercentage);
+#endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
 // *      System Screen       *
 // ****************************
-void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     display->clear();
     display->setFont(FONT_SMALL);
@@ -505,8 +532,11 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
 #ifdef USE_EINK
     barsOffset -= 12;
 #endif
+#if defined(M5STACK_UNITC6L)
+    const int barX = x + 45 + barsOffset;
+#else
     const int barX = x + 40 + barsOffset;
-
+#endif
     auto drawUsageRow = [&](const char *label, uint32_t used, uint32_t total, bool isHeap = false) {
         if (total == 0)
             return;
@@ -531,7 +561,7 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         // Label
         display->setTextAlignment(TEXT_ALIGN_LEFT);
         display->drawString(labelX, getTextPositions(display)[line], label);
-
+#if !defined(M5STACK_UNITC6L)
         // Bar
         int barY = getTextPositions(display)[line] + (FONT_HEIGHT_SMALL - barHeight) / 2;
         display->setColor(WHITE);
@@ -539,7 +569,7 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
 
         display->fillRect(barX, barY, fillWidth, barHeight);
         display->setColor(WHITE);
-
+#endif
         // Value string
         display->setTextAlignment(TEXT_ALIGN_RIGHT);
         display->drawString(SCREEN_WIDTH - 2, getTextPositions(display)[line], combinedStr);
@@ -592,10 +622,16 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         line += 1;
     }
     line += 1;
+
     char appversionstr[35];
     snprintf(appversionstr, sizeof(appversionstr), "Ver: %s", optstr(APP_VERSION));
     char appversionstr_formatted[40];
     char *lastDot = strrchr(appversionstr, '.');
+#if defined(M5STACK_UNITC6L)
+    if (lastDot != nullptr) {
+        *lastDot = '\0'; // truncate string
+    }
+#else
     if (lastDot) {
         size_t prefixLen = lastDot - appversionstr;
         strncpy(appversionstr_formatted, appversionstr, prefixLen);
@@ -606,12 +642,13 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         strncpy(appversionstr, appversionstr_formatted, sizeof(appversionstr) - 1);
         appversionstr[sizeof(appversionstr) - 1] = '\0';
     }
+#endif
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
-    display->drawString(nameX, getTextPositions(display)[line], appversionstr);
 
-    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line < 4)) { // Only show uptime if the screen can show it
-        line += 1;
+    display->drawString(nameX, getTextPositions(display)[line++], appversionstr);
+
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show uptime if the screen can show it
         char uptimeStr[32] = "";
         uint32_t uptime = millis() / 1000;
         uint32_t days = uptime / 86400;
@@ -626,9 +663,70 @@ void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
             snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
         textWidth = display->getStringWidth(uptimeStr);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
-        display->drawString(nameX, getTextPositions(display)[line], uptimeStr);
+        display->drawString(nameX, getTextPositions(display)[line++], uptimeStr);
     }
+
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show API state if the screen can show it
+        char api_state[32] = "";
+        const char *clientWord = nullptr;
+
+        // Determine if narrow or wide screen
+        if (isHighResolution) {
+            clientWord = "Client";
+        } else {
+            clientWord = "App";
+        }
+        snprintf(api_state, sizeof(api_state), "No %ss Connected", clientWord);
+
+        if (service->api_state == service->STATE_BLE) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (BLE)", clientWord);
+        } else if (service->api_state == service->STATE_WIFI) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (WiFi)", clientWord);
+        } else if (service->api_state == service->STATE_SERIAL) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Serial)", clientWord);
+        } else if (service->api_state == service->STATE_PACKET) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Internal)", clientWord);
+        } else if (service->api_state == service->STATE_HTTP) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (HTTP)", clientWord);
+        } else if (service->api_state == service->STATE_ETH) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Ethernet)", clientWord);
+        }
+        if (api_state[0] != '\0') {
+            display->drawString((SCREEN_WIDTH - display->getStringWidth(api_state)) / 2, getTextPositions(display)[line++],
+                                api_state);
+        }
+    }
+
+    graphics::drawCommonFooter(display, x, y);
 }
+
+// ****************************
+// * Chirpy Screen      *
+// ****************************
+void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    display->clear();
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->setFont(FONT_SMALL);
+    int line = 1;
+    int iconX = SCREEN_WIDTH - chirpy_width - (chirpy_width / 3);
+    int iconY = (SCREEN_HEIGHT - chirpy_height) / 2;
+    int textX_offset = 10;
+    if (isHighResolution) {
+        iconX = SCREEN_WIDTH - chirpy_width_hirez - (chirpy_width_hirez / 3);
+        iconY = (SCREEN_HEIGHT - chirpy_height_hirez) / 2;
+        textX_offset = textX_offset * 4;
+        display->drawXbm(iconX, iconY, chirpy_width_hirez, chirpy_height_hirez, chirpy_hirez);
+    } else {
+        display->drawXbm(iconX, iconY, chirpy_width, chirpy_height, chirpy);
+    }
+
+    int textX = (display->getWidth() / 2) - textX_offset - (display->getStringWidth("Hello") / 2);
+    display->drawString(textX, getTextPositions(display)[line++], "Hello");
+    textX = (display->getWidth() / 2) - textX_offset - (display->getStringWidth("World!") / 2);
+    display->drawString(textX, getTextPositions(display)[line++], "World!");
+}
+
 } // namespace DebugRenderer
 } // namespace graphics
 #endif

src/graphics/draw/DebugRenderer.h

@@ -31,8 +31,10 @@ void drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state
 // LoRa information display
 void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
-// Memory screen display
-void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+// System screen display
+void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+// Chirpy screen display
+void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 } // namespace DebugRenderer
 
 } // namespace graphics