Remove .tmp

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

.devcontainer/Dockerfile

@@ -29,11 +29,7 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     gpg \
     gnupg2 \
     libusb-1.0-0-dev \
-    libuv1-dev \
     libi2c-dev \
-    libxcb-xkb-dev \
-    libxkbcommon-dev \
-    libinput-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
 RUN pipx install platformio

.devcontainer/setup.sh

@@ -1,6 +1,3 @@
 #!/usr/bin/env sh
 
 git submodule update --init
-
-pip install --no-cache-dir setuptools
-pipx install esptool

.gitattributes

@@ -1,5 +1,4 @@
 * text=auto eol=lf
-*.cmd text eol=crlf
-*.bat text eol=crlf
-*.ps1 text eol=crlf
+*.{cmd,[cC][mM][dD]} text eol=crlf
+*.{bat,[bB][aA][tT]} text eol=crlf
 *.{sh,[sS][hH]} text eol=lf

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -72,15 +72,6 @@ body:
     validations:
       required: true
 
-  - type: checkboxes
-    id: mui
-    attributes:
-      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
-      options:
-        - label: Meshtastic UI aka MUI colorTFT
-        - label: InkHUD ePaper
-        - label: OLED slide UI on any display
-
   - type: input
     id: version
     attributes:

.github/actions/build-variant/action.yml

@@ -43,13 +43,6 @@ runs:
       id: base
       uses: ./.github/actions/setup-base
 
-    - name: Get web ui version
-      if: inputs.include-web-ui == 'true'
-      id: webver
-      shell: bash
-      run: |
-        echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
-
     - name: Pull web ui
       if: inputs.include-web-ui == 'true'
       uses: dsaltares/fetch-gh-release-asset@master
@@ -58,7 +51,7 @@ runs:
         file: build.tar
         target: build.tar
         token: ${{ inputs.github_token }}
-        version: tags/v${{ steps.webver.outputs.ver }}
+        version: tags/v2.5.3
 
     - name: Unpack web ui
       if: inputs.include-web-ui == 'true'

.github/actions/setup-native/action.yml

@@ -11,4 +11,4 @@ runs:
     - name: Install libs needed for native build
       shell: bash
       run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev
+        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev

.github/dependabot.yml

@@ -0,0 +1,27 @@
+#trunk-ignore-all(yamllint/quoted-strings): required by dependabot syntax check
+version: 2
+updates:
+  - package-ecosystem: docker
+    directory: /.devcontainer
+    schedule:
+      interval: daily
+      time: "05:00"
+      timezone: US/Pacific
+  - package-ecosystem: docker
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00"
+      timezone: US/Pacific
+  - package-ecosystem: gitsubmodule
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00"
+      timezone: US/Pacific
+  - package-ecosystem: github-actions
+    directory: /.github/workflows
+    schedule:
+      interval: daily
+      time: "05:00"
+      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,6 +1,7 @@
-## 🙏 Thank you for sending in a pull request, here's some tips to get started!
-
 ### ❌ (Please delete all these tips and replace them with your text) ❌
+
+## Thank you for sending in a pull request, here's some tips to get started!
+
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
@@ -11,17 +12,4 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
-- Please do not submit untested code.
-- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
-
-
-## 🤝 Attestations
-- [ ] I have tested that my proposed changes behave as described.
-- [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
-  - [ ] Heltec (Lora32) V3
-  - [ ] LilyGo T-Deck 
-  - [ ] LilyGo T-Beam
-  - [ ] RAK WisBlock 4631
-  - [ ] Seeed Studio T-1000E tracker card
-  - [ ] Other (please specify below)

.github/workflows/build_debian_src.yml

@@ -4,7 +4,7 @@ on:
   workflow_call:
     secrets:
       PPA_GPG_PRIVATE_KEY:
-        required: false
+        required: true
     inputs:
       series:
         description: Ubuntu/Debian series to target

.github/workflows/docker_build.yml

@@ -26,11 +26,6 @@ on:
         required: false
         type: boolean
         default: false
-      pio_env:
-        description: PlatformIO environment to build
-        required: false
-        type: string
-        default: native
     outputs:
       digest:
         description: Digest of built image
@@ -95,5 +90,3 @@ jobs:
           push: ${{ inputs.push }}
           tags: ${{ steps.meta.outputs.tags }} # Tag is only meant to be consumed by the "manifest" job
           platforms: ${{ inputs.platform }}
-          build-args: |
-            PIO_ENV=${{ inputs.pio_env }}

.github/workflows/main_matrix.yml

@@ -5,20 +5,14 @@ concurrency:
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
-    branches:
-      - master
-      - develop
-      - event/*
+    branches: [master, develop]
     paths-ignore:
       - "**.md"
       - version.properties
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
-    branches:
-      - master
-      - develop
-      - event/*
+    branches: [master, develop]
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -38,12 +32,12 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
+          if [[ "${{ github.head_ref }}" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
+          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
@@ -142,17 +136,15 @@ jobs:
     secrets: inherit
 
   package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
     uses: ./.github/workflows/package_pio_deps.yml
     with:
       pio_env: native-tft
     secrets: inherit
 
   test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker-deb-amd64:
+  docker-debian-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -160,16 +152,7 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-deb-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
+  docker-alpine-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -177,16 +160,7 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-alp-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
+  docker-debian-arm64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -194,7 +168,7 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  docker-deb-armv7:
+  docker-debian-armv7:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -202,6 +176,17 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
+  after-checks:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    needs: [check]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
   gather-artifacts:
     permissions:
       contents: write
@@ -344,27 +329,47 @@ jobs:
         with:
           pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
           merge-multiple: true
-          path: ./output/pio-deps-native-tft
+          path: ./output/pio-deps-native
 
-      - name: Zip Linux sources
+      - name: Zip linux sources
         working-directory: output
         run: |
           zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
+          zip -9 -r ./platformio-deps-native-${{ steps.version.outputs.long }}.zip ./pio-deps-native
 
       # For diagnostics
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
+      - name: Add linux sources to release
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
-          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
+      - name: Bump version.properties
+        run: >-
+          bin/bump_version.py
+
+      - name: Ensure debian deps are installed
+        shell: bash
+        run: |
+          sudo apt-get update -y --fix-missing
+          sudo apt-get install -y devscripts
+
+      - name: Update debian changelog
+        run: >-
+          debian/ci_changelog.sh
+
+      - name: Create version.properties pull request
+        uses: peter-evans/create-pull-request@v7
+        with:
+          title: Bump version.properties
+          add-paths: |
+            version.properties
+            debian/changelog
+
   release-firmware:
     strategy:
       fail-fast: false
@@ -416,53 +421,9 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
+      - name: Add bins and debug elfs to release
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware]
-    env:
-      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ steps.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/release_channels.yml

@@ -43,64 +43,3 @@ jobs:
       copr_project: |-
         ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
     secrets: inherit
-
-  # Create a PR to bump version when a release is Published
-  bump-version:
-    if: github.event.action == 'published'
-    runs-on: ubuntu-latest
-    permissions:
-      pull-requests: write
-      contents: write
-    defaults:
-      run:
-        shell: bash
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Bump version.properties
-        run: |
-          # Bump version.properties
-          chmod +x ./bin/bump_version.py
-          ./bin/bump_version.py
-
-      - name: Get new release version string
-        run: |
-          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
-        id: new_version
-
-      - name: Ensure debian deps are installed
-        run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y devscripts
-
-      - name: Update debian changelog
-        run: |
-          # Update debian changelog
-          chmod +x ./debian/ci_changelog.sh
-          ./debian/ci_changelog.sh
-
-      - name: Bump org.meshtastic.meshtasticd.metainfo.xml
-        run: |
-          # Bump org.meshtastic.meshtasticd.metainfo.xml
-          pip install -r bin/bump_metainfo/requirements.txt -q
-          chmod +x ./bin/bump_metainfo/bump_metainfo.py
-          ./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.new_version.outputs.short }}"
-        env:
-          PIP_DISABLE_PIP_VERSION_CHECK: 1
-
-      - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v7
-        with:
-          base: ${{ github.event.repository.default_branch }}
-          title: Bump release version
-          commit-message: automated bumps
-          add-paths: |
-            version.properties
-            debian/changelog
-            bin/org.meshtastic.meshtasticd.metainfo.xml

.github/workflows/sec_sast_semgrep_cron.yml

@@ -6,14 +6,11 @@ on:
   schedule:
     - cron: 0 1 * * 6
 
-permissions:
-  actions: read
-  contents: read
-  security-events: write
+permissions: read-all
 
 jobs:
   semgrep-full:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     container:
       image: semgrep/semgrep
 

.github/workflows/sec_sast_semgrep_pull.yml

@@ -6,7 +6,7 @@ permissions: read-all
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-22.04
     container:
       image: semgrep/semgrep
 

.github/workflows/stale_bot.yml

@@ -18,6 +18,5 @@ jobs:
       - name: Stale PR+Issues
         uses: actions/stale@v9.1.0
         with:
-          days-before-stale: 45
           exempt-issue-labels: pinned,3.0
           exempt-pr-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.0
+        uses: dorny/test-reporter@v1.9.1
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -5,10 +5,7 @@ on:
     - cron: 0 0 * * * # Run every day at midnight
   workflow_dispatch: {}
 
-permissions:
-  contents: read
-  actions: read
-  checks: write
+permissions: read-all
 
 jobs:
   native-tests:
@@ -47,7 +44,7 @@ jobs:
       - name: Setup Node
         uses: actions/setup-node@v4
         with:
-          node-version: 22
+          node-version: 18
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.gitmodules

@@ -1,6 +1,9 @@
 [submodule "protobufs"]
 	path = protobufs
 	url = https://github.com/meshtastic/protobufs.git
+[submodule "lib/device-ui"]
+	path = lib/device-ui
+	url = https://github.com/meshtastic/device-ui.git
 [submodule "meshtestic"]
 	path = meshtestic
 	url = https://github.com/meshtastic/meshTestic

.trunk/configs/.prettierignore

@@ -1 +0,0 @@
-renovate.json

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.24.0
+  version: 1.22.10
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.0
+      ref: v1.6.7
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.435
-    - renovate@40.34.4
-    - prettier@3.5.3
-    - trufflehog@3.88.34
-    - yamllint@1.37.1
+    - prettier@3.5.2
+    - trufflehog@3.88.14
+    - yamllint@1.35.1
     - bandit@1.8.3
-    - trivy@0.62.1
+    - checkov@3.2.378
+    - terrascan@1.19.9
+    - trivy@0.59.1
     - taplo@0.9.3
-    - ruff@0.11.11
+    - ruff@0.9.7
     - isort@6.0.1
-    - markdownlint@0.45.0
-    - oxipng@9.1.5
+    - markdownlint@0.44.0
+    - oxipng@9.1.4
     - svgo@3.3.2
     - actionlint@1.7.7
-    - flake8@7.2.0
+    - flake8@7.1.2
     - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.26.0
+    - gitleaks@8.24.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]
@@ -38,7 +38,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@22.16.0
+    - node@18.20.5
 actions:
   disabled:
     - trunk-announce

.vscode/settings.json

@@ -7,62 +7,5 @@
   "cmake.configureOnOpen": false,
   "[cpp]": {
     "editor.defaultFormatter": "trunk.io"
-  },
-  "[powershell]": {
-    "editor.defaultFormatter": "ms-vscode.powershell"
-  },
-  "files.associations": {
-    "array": "cpp",
-    "atomic": "cpp",
-    "*.tcc": "cpp",
-    "cctype": "cpp",
-    "clocale": "cpp",
-    "cmath": "cpp",
-    "csignal": "cpp",
-    "cstdarg": "cpp",
-    "cstddef": "cpp",
-    "cstdint": "cpp",
-    "cstdio": "cpp",
-    "cstdlib": "cpp",
-    "cstring": "cpp",
-    "ctime": "cpp",
-    "cwchar": "cpp",
-    "cwctype": "cpp",
-    "deque": "cpp",
-    "list": "cpp",
-    "unordered_map": "cpp",
-    "unordered_set": "cpp",
-    "vector": "cpp",
-    "exception": "cpp",
-    "algorithm": "cpp",
-    "functional": "cpp",
-    "iterator": "cpp",
-    "map": "cpp",
-    "memory": "cpp",
-    "memory_resource": "cpp",
-    "numeric": "cpp",
-    "optional": "cpp",
-    "random": "cpp",
-    "string": "cpp",
-    "string_view": "cpp",
-    "system_error": "cpp",
-    "tuple": "cpp",
-    "type_traits": "cpp",
-    "utility": "cpp",
-    "fstream": "cpp",
-    "initializer_list": "cpp",
-    "iomanip": "cpp",
-    "iosfwd": "cpp",
-    "iostream": "cpp",
-    "istream": "cpp",
-    "limits": "cpp",
-    "new": "cpp",
-    "ostream": "cpp",
-    "sstream": "cpp",
-    "stdexcept": "cpp",
-    "streambuf": "cpp",
-    "cinttypes": "cpp",
-    "typeinfo": "cpp",
-    "*.xbm": "cpp"
   }
 }

Dockerfile

@@ -1,20 +1,20 @@
+# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
+# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
 FROM python:3.13-bookworm AS builder
-ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
 # Install Dependencies
 ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
-        curl wget g++ zip git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev \
+        wget g++ zip git ca-certificates \
+        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
+        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -24,26 +24,13 @@ WORKDIR /tmp/firmware
 COPY . /tmp/firmware
 
 # Build
-RUN bash ./bin/build-native.sh "$PIO_ENV" && \
+RUN bash ./bin/build-native.sh && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
-# Fetch web assets
-RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/firmware/bin/web.version)/build.tar" -o /tmp/web.tar \
-    && mkdir -p /tmp/web \
-    && tar -xf /tmp/web.tar -C /tmp/web/ \
-    && gzip -dr /tmp/web \
-    && rm /tmp/web.tar
 
 ##### PRODUCTION BUILD #############
 
 FROM debian:bookworm-slim
-LABEL org.opencontainers.image.title="Meshtastic" \
-      org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
-      org.opencontainers.image.url="https://meshtastic.org" \
-      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
-      org.opencontainers.image.authors="Meshtastic" \
-      org.opencontainers.image.licenses="GPL-3.0-or-later" \
-      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
@@ -51,17 +38,14 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7 libssl3 \
-        libx11-6 libinput10 libxkbcommon-x11-0 \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
 
 # Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 
@@ -70,9 +54,7 @@ VOLUME /var/lib/meshtasticd
 
 # Expose Meshtastic TCP API port from the host
 EXPOSE 4403
-# Expose Meshtastic Web UI port from the host
-EXPOSE 9443
 
-CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
+CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
 
-HEALTHCHECK NONE
+HEALTHCHECK NONE

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.6.x            | :white_check_mark: |
-| <= 2.5.x         | :x:                |
+| 2.5.x            | :white_check_mark: |
+| <= 2.4.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -1,16 +1,15 @@
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
+# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
 FROM python:3.13-alpine3.21 AS builder
-ARG PIO_ENV=native
-ENV PIP_ROOT_USER_ACTION=ignore
 
+ENV PIP_ROOT_USER_ACTION=ignore
 RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev \
+        libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -22,35 +21,23 @@ COPY . /tmp/firmware
 # Add `argp` for musl
 ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
 
-RUN bash ./bin/build-native.sh "$PIO_ENV" && \
+RUN bash ./bin/build-native.sh && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 # ##### PRODUCTION BUILD #############
 
 FROM alpine:3.21
-LABEL org.opencontainers.image.title="Meshtastic" \
-      org.opencontainers.image.description="Alpine Meshtastic daemon" \
-      org.opencontainers.image.url="https://meshtastic.org" \
-      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
-      org.opencontainers.image.authors="Meshtastic" \
-      org.opencontainers.image.licenses="GPL-3.0-or-later" \
-      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 
 # nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
 USER root
 
 RUN apk --no-cache add \
-        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
-        libx11 libinput libxkbcommon \
+        libstdc++ libgpiod yaml-cpp libusb i2c-tools \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
-
-# Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-# Copy config templates
-COPY ./bin/config.d /etc/meshtasticd/available.d
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
 
 WORKDIR /var/lib/meshtasticd
 VOLUME /var/lib/meshtasticd

arch/esp32/esp32.ini

@@ -2,9 +2,7 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform =
-  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.10.0
+platform = platformio/espressif32@6.10.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -46,20 +44,13 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/896f1771ceb5979987a0b41028bf1b4e7aad419b.zip
-  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.3
-  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
-  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
   lewisxhe/XPowersLib@^0.2.7
-  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
 
 lib_ignore = 
   segger_rtt

arch/esp32/esp32c6.ini

@@ -1,8 +1,6 @@
 [esp32c6_base]
 extends = esp32_base
-platform =
-  # Do not renovate until we have switched to pioarduino tagged builds
-  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
+platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
 build_flags =
   ${arduino_base.build_flags}
   -Wall
@@ -25,14 +23,10 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
   lewisxhe/XPowersLib@^0.2.7
-  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
 
 build_src_filter = 
  ${esp32_base.build_src_filter} -<mesh/http> 

arch/esp32/esp32s2.ini

@@ -16,4 +16,4 @@ build_flags =
 lib_ignore = 
   ${esp32_base.lib_ignore} 
   NimBLE-Arduino
-  libpax
+  libpax

arch/esp32/esp32s3.ini

@@ -3,3 +3,4 @@ extends = esp32_base
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
+

arch/nrf52/nrf52.ini

@@ -1,14 +1,10 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform =
-  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
-  platformio/nordicnrf52@^10.8.0
+platform = platformio/nordicnrf52@^10.7.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
-  # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
-  ; Don't renovate toolchain-gccarmnoneeabi
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino.git#e13f5820002a4fb2a5e6754b42ace185277e5adf
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
@@ -21,6 +17,7 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -DMAX_NUM_NODES=80
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -28,9 +25,8 @@ build_src_filter =
 lib_deps=
   ${arduino_base.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  rweather/Crypto@^0.4.0
 
 lib_ignore =
   BluetoothOTA
-  lvgl
+  lvgl

arch/nrf52/nrf52840.ini

@@ -6,9 +6,7 @@ build_flags = ${nrf52_base.build_flags}
 lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
-  # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -1,8 +1,6 @@
 ; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
 [portduino_base]
-platform =
-  # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/622341c6de8a239704318b10c3dbb00c21a3eab3.zip
+platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
 framework = arduino
 
 build_src_filter = 
@@ -17,19 +15,18 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
+  -<modules/Telemetry/EnvironmentTelemetry.cpp>
+  -<modules/Telemetry/AirQualityTelemetry.cpp>
+  -<modules/Telemetry/Sensor>
   +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   ${radiolib_base.lib_deps}
-  ${environmental_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  rweather/Crypto@^0.4.0
   lovyan03/LovyanGFX@^1.2.0
-  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
-  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
+  https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
 
 build_flags =
   ${arduino_base.build_flags}
@@ -37,15 +34,10 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
   -li2c
-  -luv
-  -std=gnu17
   -std=c++17
-
-lib_ignore = Adafruit NeoPixel

arch/rp2xx0/rp2040.ini

@@ -1,13 +1,8 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform =
-  # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
 extends = arduino_base
-platform_packages =
-  # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -28,7 +23,5 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  rweather/Crypto

arch/rp2xx0/rp2350.ini

@@ -1,13 +1,8 @@
-; Common settings for rp2350 Processor based targets
+; Common settings for rp2040 Processor based targets
 [rp2350_base]
-platform =
-  # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages =
-  # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -25,7 +20,5 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  rweather/Crypto

arch/stm32/stm32.ini

@@ -1,18 +1,13 @@
 [stm32_base]
 extends = arduino_base
-platform =
-  # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.1.0
-platform_packages =
-  # TODO renovate
-  platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
-extra_scripts =
-  ${env.extra_scripts}
-  post:extra_scripts/extra_stm32.py
+platform = platformio/ststm32
+platform_packages = platformio/framework-arduinoststm32@^4.20900.0
 
 build_type = release
 
-build_flags =
+;board_build.flash_offset = 0x08000000
+
+build_flags = 
   ${arduino_base.build_flags}
   -flto
   -Isrc/platform/stm32wl -g
@@ -23,25 +18,27 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN
   -DMESHTASTIC_EXCLUDE_MQTT
   -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  -DMESHTASTIC_EXCLUDE_PKI
   -DMESHTASTIC_EXCLUDE_GPS
-  ;-DDEBUG_MUTE
+;  -DVECT_TAB_OFFSET=0x08000000
+  -DconfigUSE_CMSIS_RTOS_V2=1
+;  -DSPI_MODE_0=SPI_MODE0
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-
-build_src_filter =
+  
+build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
-debug_tool = stlink
 
 lib_deps =
   ${env.lib_deps}
-  ${radiolib_base.lib_deps}
-  # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
+  charlesbaynham/OSFS@^1.2.3
+  jgromes/RadioLib@7.0.2
+  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
   mathertel/OneButton@2.6.1
-  Wire
+  Wire

bin/99-meshtasticd-udev.rules

@@ -1,7 +0,0 @@
-# Set spidev ownership to 'spi' group
-SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
-# Allow access to USB CH341 devices
-SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
-# Set gpio ownership to 'gpio' group
-SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
-SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

bin/build-native.sh

@@ -15,7 +15,6 @@ platformioFailed() {
 
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
-PIO_ENV=${1:-native}
 
 OUTDIR=release/
 
@@ -25,7 +24,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg update --environment "$PIO_ENV" || platformioFailed
-pio run --environment "$PIO_ENV" || platformioFailed
-cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
+pio pkg update --environment native || platformioFailed
+pio run --environment native || platformioFailed
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/bump_metainfo/bump_metainfo.py

@@ -1,72 +0,0 @@
-#!/usr/bin/env python3
-import argparse
-import xml.etree.ElementTree as ET
-from defusedxml.ElementTree import parse
-from datetime import datetime, timezone
-
-
-# Indent by 2 spaces to align with xml formatting.
-def indent(elem, level=0):
-    i = "\n" + level * "  "
-    if len(elem):
-        if not elem.text or not elem.text.strip():
-            elem.text = i + "  "
-        for child in elem:
-            indent(child, level + 1)
-        if not child.tail or not child.tail.strip():
-            child.tail = i
-    if level and (not elem.tail or not elem.tail.strip()):
-        elem.tail = i
-
-
-def main():
-    parser = argparse.ArgumentParser(
-        description="Prepend new release entry to metainfo.xml file.")
-    parser.add_argument("--file", help="Path to the metainfo.xml file",
-                        default="org.meshtastic.meshtasticd.metainfo.xml")
-    parser.add_argument("version", help="Version string (e.g. 2.6.4)")
-    parser.add_argument("--date", help="Release date (YYYY-MM-DD), defaults to today",
-                        default=datetime.now(timezone.utc).date().isoformat())
-
-    args = parser.parse_args()
-
-    tree = parse(args.file)
-    root = tree.getroot()
-
-    releases = root.find('releases')
-    if releases is None:
-        raise RuntimeError("<releases> element not found in XML.")
-
-    existing_versions = {
-        release.get('version'): release
-        for release in releases.findall('release')
-    }
-    existing_release = existing_versions.get(args.version)
-
-    if existing_release is not None:
-        if not existing_release.get('date'):
-            print(f"Version {args.version} found without date. Adding date...")
-            existing_release.set('date', args.date)
-        else:
-            print(
-                f"Version {args.version} is already present with date, skipping insertion.")
-    else:
-        new_release = ET.Element('release', {
-            'version': args.version,
-            'date': args.date
-        })
-        url = ET.SubElement(new_release, 'url', {'type': 'details'})
-        url.text = f"https://github.com/meshtastic/firmware/releases?q=tag%3Av{args.version}"
-
-        releases.insert(0, new_release)
-
-        indent(releases, level=1)
-        releases.tail = "\n"
-
-        print(f"Inserted new release: {args.version}")
-
-    tree.write(args.file, encoding='UTF-8', xml_declaration=True)
-
-
-if __name__ == "__main__":
-    main()

bin/bump_metainfo/requirements.txt

@@ -1 +0,0 @@
-defusedxml==0.7.1

bin/config-dist.yaml

@@ -6,12 +6,6 @@
 ### Including the "Module:" line!
 ---
 Lora:
-  # Default to auto-detecting the module type
-  # This will be overridden by configs from config.d
-  Module: auto
-
-#  # Uncomment to enable Simulation mode, or use --sim
-#  Module: sim
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -188,22 +182,14 @@ Logging:
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
-#  Port: 9443 # Port for Webserver & Webservices
+#  Port: 443 # Port for Webserver & Webservices
 #  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
 #  SSLKey: /etc/meshtasticd/ssl/private_key.pem # Path to SSL Key, generated if not present
 #  SSLCert: /etc/meshtasticd/ssl/certificate.pem # Path to SSL Certificate, generated if not present
 
-
-HostMetrics:
-#  ReportInterval: 30 # Interval in minutes between HostMetrics report packets, or 0 for disabled
-#  Channel: 0 # channel to send Host Metrics over. Defaults to the primary channel.
-#  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
-
-
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
   ConfigDirectory: /etc/meshtasticd/config.d/
-  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
-#  MACAddressSource: eth0
+#  MACAddressSource: eth0

bin/config.d/lora-Adafruit-RFM9x

@@ -0,0 +1,5 @@
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -1,6 +0,0 @@
-Lora:
-  Module: RF95  # Adafruit RFM9x
-  Reset: 25
-  CS: 7
-  IRQ: 22
-#  Busy: 23

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,5 +1,3 @@
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
 Lora:
   Module: sx1262
   CS: 21
@@ -11,4 +9,4 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   # Only for E22-900M33S:
   # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
+  # SX126X_MAX_POWER: 8

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -1,11 +0,0 @@
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Lora:
-  Module: sx1262  # Ebyte E22-900M22S 
-  CS: 8
-  IRQ: 16
-  Busy: 20
-  Reset: 24
-  TXen: 13
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-piggystick-lr1121.yaml

@@ -1,11 +0,0 @@
-Lora:
-  Module: lr1121
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  spidev: ch341
-  DIO3_TCXO_VOLTAGE: 1.8
-#  USB_Serialnum: 12345678
-  USB_PID: 0x5512
-  USB_VID: 0x1A86

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -1,17 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  RXen: 1
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  # Optional: Reduce power to 10 dBm to
-  # avoid over-drawing the USB port
-  # SX126X_MAX_POWER: 10
-  # Optional: Set the serial number for multi-radio support
-  # USB_Serialnum: 13374201

bin/device-install.bat

@@ -1,295 +1,72 @@
 @ECHO OFF
-SETLOCAL EnableDelayedExpansion
-TITLE Meshtastic device-install
 
-SET "SCRIPT_NAME=%~nx0"
-SET "DEBUG=0"
-SET "PYTHON="
-SET "WEB_APP=0"
-SET "TFT_BUILD=0"
-SET "BIGDB8=0"
-SET "BIGDB16=0"
-SET "ESPTOOL_BAUD=115200"
-SET "ESPTOOL_CMD="
-SET "LOGCOUNTER=0"
+set PYTHON=python
+set WEB_APP=0
 
-@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
-SET "C3=esp32c3"
-@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
 
-GOTO getopts
-:help
-ECHO Flash image file to device, but first erasing and writing system information.
-ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web)
-ECHO.
-ECHO Options:
-ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
-ECHO                      The file must be located in this current directory.
-ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
-ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
-ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
-ECHO                      If supplied the script will use python.
-ECHO                      If not supplied the script will try to find esptool in Path.
-ECHO     --web            Enable WebUI. (default: false)
-ECHO.
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
-GOTO eof
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web]
+echo Flash image file to device, but first erasing and writing system information
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+echo     --web            Flash WEB APP.
+goto EOF
 
-:version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
-ECHO Meshtastic
-GOTO eof
-
-:getopts
-IF "%~1"=="" GOTO endopts
-IF /I "%~1"=="-?" GOTO help
-IF /I "%~1"=="-h" GOTO help
-IF /I "%~1"=="--help" GOTO help
-IF /I "%~1"=="-v" GOTO version
-IF /I "%~1"=="--version" GOTO version
-IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
-IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
-IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
-IF /I "%~1"=="--web" SET "WEB_APP=1"
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+if /I "%1"=="--web" set WEB_APP=1 & SHIFT
 SHIFT
-GOTO getopts
-:endopts
+IF NOT "__%1__"=="____" goto GETOPTS
 
-CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
-IF "__!FILENAME!__"=="____" (
-    CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
-    GOTO help
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
-    IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
-        GOTO help
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+    goto HELP
+)
+IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
+    echo Trying to flash update %FILENAME%, but first erasing and writing system information"
+    %ESPTOOL_CMD% --baud 115200 erase_flash
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
+    
+    @REM Account for S3 and C3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
+        IF x%FILENAME:esp32c3=%==x%FILENAME% (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
+        ) else (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
+        )
+    ) else (
+        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
     )
-    IF "__!FILENAME:firmware-=!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-* file."
-        GOTO help
+    IF %WEB_APP%==1 (
+        for %%f in (littlefswebui-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
+    ) else (
+        for %%f in (littlefs-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
     )
-    @REM Remove ".\" or "./" file prefix if present.
-    SET "FILENAME=!FILENAME:.\=!"
-    SET "FILENAME=!FILENAME:./=!"
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
-IF NOT EXIST !FILENAME! (
-    CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
-    GOTO eof
-)
-
-IF NOT "!FILENAME:update=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
-    CALL :LOG_MESSAGE INFO "Use script device-update.bat to flash update !FILENAME!."
-    GOTO eof
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
-IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
-    CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
-    WHERE esptool >nul 2>&1
-    IF %ERRORLEVEL% EQU 0 (
-        @REM WHERE exits with code 0 if esptool is found.
-        SET "ESPTOOL_CMD=esptool"
-    ) ELSE (
-        SET "ESPTOOL_CMD=python -m esptool"
-        CALL :RESET_ERROR
-    )
-)
-
-CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
-!ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
-    CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
-    EXIT /B 1
-    GOTO eof
-)
-IF %DEBUG% EQU 1 (
-    CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
-    SET "ESPTOOL_CMD=REM !ESPTOOL_CMD!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
-IF "__!ESPTOOL_PORT!__" == "____" (
-    CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
-) ELSE (
-    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
-    CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
-)
-CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
-
-@REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
-@REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
-IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
-    IF %WEB_APP% EQU 1 (
-        CALL :LOG_MESSAGE ERROR "Cannot enable WebUI (--web) and MUI." & GOTO eof
-    )
-    SET "TFT_BUILD=1"
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
-)
-
-FOR %%a IN (%BIGDB_8MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %BIGDB_8MB%.
-        SET "BIGDB8=1"
-        GOTO end_loop_bigdb_8mb
-    )
-)
-:end_loop_bigdb_8mb
-
-FOR %%a IN (%BIGDB_16MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %BIGDB_16MB%.
-        SET "BIGDB16=1"
-        GOTO end_loop_bigdb_16mb
-    )
-)
-:end_loop_bigdb_16mb
-
-IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
-IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
-
-@REM Extract BASENAME from %FILENAME% for later use.
-SET "BASENAME=!FILENAME:firmware-=!"
-CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
-
-@REM Account for S3 and C3 board's different OTA partition.
-FOR %%a IN (%S3%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %S3%.
-        SET "OTA_FILENAME=bleota-s3.bin"
-        GOTO :end_loop_s3
-    )
-)
-
-FOR %%a IN (%C3%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %C3%.
-        SET "OTA_FILENAME=bleota-c3.bin"
-        GOTO :end_loop_c3
-    )
-)
-
-@REM Everything else
-SET "OTA_FILENAME=bleota.bin"
-:end_loop_s3
-:end_loop_c3
-CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
-
-@REM Check if (--web) is enabled and prefix BASENAME with "littlefswebui-" else "littlefs-".
-IF %WEB_APP% EQU 1 (
-    CALL :LOG_MESSAGE INFO "WebUI selected."
-    SET "SPIFFS_FILENAME=littlefswebui-%BASENAME%"
-) ELSE (
-    SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
-)
-CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
-
-@REM Default offsets.
-@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
-SET "OTA_OFFSET=0x260000"
-SET "SPIFFS_OFFSET=0x300000"
-
-@REM Offsets for BigDB 8mb.
-IF %BIGDB8% EQU 1 (
-    SET "OTA_OFFSET=0x340000"
-    SET "SPIFFS_OFFSET=0x670000"
-)
-
-@REM Offsets for BigDB 16mb.
-IF %BIGDB16% EQU 1 (
-    SET "OTA_OFFSET=0x650000"
-    SET "SPIFFS_OFFSET=0xc90000"
-)
-
-CALL :LOG_MESSAGE DEBUG "Set OTA_OFFSET to: !OTA_OFFSET!"
-CALL :LOG_MESSAGE DEBUG "Set SPIFFS_OFFSET to: !SPIFFS_OFFSET!"
-
-@REM Ensure target files exist before flashing operations.
-IF NOT EXIST !FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
-IF NOT EXIST !OTA_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!OTA_FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
-IF NOT EXIST !SPIFFS_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!SPIFFS_FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
-
-@REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash "!FILENAME!", but first erasing and writing system information..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase_flash || GOTO eof
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x00 "!FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Trying to flash BLEOTA "!OTA_FILENAME!" at OTA_OFFSET !OTA_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Trying to flash SPIFFS "!SPIFFS_FILENAME!" at SPIFFS_OFFSET !SPIFFS_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Script complete!."
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
-
-
-:RUN_ESPTOOL
-@REM Subroutine used to run ESPTOOL_CMD with arguments.
-@REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
-@REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
-IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-CALL :RESET_ERROR
-!ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
-IF %ERRORLEVEL% NEQ 0 (
-    CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-    EXIT /B %ERRORLEVEL%
-)
-GOTO :eof
-
-:LOG_MESSAGE
-@REM Subroutine used to print log messages in four different levels.
-@REM DEBUG messages only get printed if [-d] flag is passed to script.
-@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
-@REM.
-@REM Example:: CALL :LOG_MESSAGE INFO "Message."
-SET /A LOGCOUNTER=LOGCOUNTER+1
-IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-GOTO :eof
-
-:GET_TIMESTAMP
-@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
-@REM CALL :GET_TIMESTAMP
-@REM.
-@REM Updates: !TIMESTAMP!
-FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
-    SET "HH=%%a"
-    SET "MM=%%b"
-    SET "ss=%%c"
-)
-SET "TIMESTAMP=!HH!:!MM!:!ss!"
-GOTO :eof
-
-:RESET_ERROR
-@REM Subroutine to reset %ERRORLEVEL% to 0.
-@REM CALL :RESET_ERROR
-@REM.
-@REM Updates: %ERRORLEVEL%
-EXIT /B 0
-GOTO :eof
+:EOF

bin/device-install.sh

@@ -1,70 +1,18 @@
-#!/bin/bash
+#!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 WEB_APP=false
-TFT_BUILD=false
-MCU=""
-
-# Variant groups
-BIGDB_8MB=(
-	"picomputer-s3"
-	"unphone"
-	"seeed-sensecap-indicator"
-	"crowpanel-esp32s3"
-	"heltec_capsule_sensor_v3"
-	"heltec-v3"
-	"heltec-vision-master-e213"
-	"heltec-vision-master-e290"
-	"heltec-vision-master-t190"
-	"heltec-wireless-paper"
-	"heltec-wireless-tracker"
-	"heltec-wsl-v3"
-	"icarus"
-	"seeed-xiao-s3"
-	"tbeam-s3-core"
-	"tracksenger"
-)
-BIGDB_16MB=(
-	"t-deck"
-	"mesh-tab"
-	"t-energy-s3"
-	"dreamcatcher"
-	"ESP32-S3-Pico"
-	"m5stack-cores3"
-	"station-g2"
-	"t-eth-elite"
-	"t-watch-s3"
-)
-S3_VARIANTS=(
-	"s3"
-	"-v3"
-	"t-deck"
-	"wireless-paper"
-	"wireless-tracker"
-	"station-g2"
-	"unphone"
-	"t-eth-elite"
- 	"mesh-tab"
-	"dreamcatcher"
-	"ESP32-S3-Pico"
-	"seeed-sensecap-indicator"
-	"heltec_capsule_sensor_v3"
-	"vision-master"
-	"icarus"
-	"tracksenger"
-	"elecrow-adv"
-)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-	ESPTOOL_CMD="$PYTHON -m esptool"
+    ESPTOOL_CMD="$PYTHON -m esptool"
 elif command -v esptool >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool"
+    ESPTOOL_CMD="esptool"
 elif command -v esptool.py >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool.py"
+    ESPTOOL_CMD="esptool.py"
 else
-	echo "Error: esptool not found"
-	exit 1
+    echo "Error: esptool not found"
+    exit 1
 fi
 
 set -e
@@ -72,141 +20,75 @@ set -e
 # Usage info
 show_help() {
 	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web]
-Flash image file to device, but first erasing and writing system information.
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--web]
+Flash image file to device, but first erasing and writing system information"
 
-    -h               Display this help and exit.
+    -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
-    --web            Enable WebUI. (Default: false)
+    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+    --web            Flash WEB APP.
 
 EOF
 }
-# Parse arguments using a single while loop
-while [ $# -gt 0 ]; do
-	case "$1" in
-	-h | --help)
+# Preprocess long options like --web
+for arg in "$@"; do
+    case "$arg" in
+        --web)
+            WEB_APP=true
+            shift # Remove this argument from the list
+            ;;
+    esac
+done
+
+while getopts ":hp:P:f:" opt; do
+	case "${opt}" in
+	h)
 		show_help
 		exit 0
 		;;
-	-p)
-		ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
-		shift
+	p)
+		export ESPTOOL_PORT=${OPTARG}
 		;;
-	-P)
-		PYTHON="$2"
-		shift
+	P)
+		PYTHON=${OPTARG}
 		;;
-	-f)
-		FILENAME="$2"
-		shift
-		;;
-	--web)
-		WEB_APP=true
-		;;
-	--) # Stop parsing options
-		shift
-		break
+	f)
+		FILENAME=${OPTARG}
 		;;
 	*)
-		echo "Unknown argument: $1" >&2
+		echo "Invalid flag."
+		show_help >&2
 		exit 1
 		;;
 	esac
-	shift # Move to the next argument
 done
+shift "$((OPTIND - 1))"
 
 [ -z "$FILENAME" -a -n "$1" ] && {
 	FILENAME=$1
 	shift
 }
 
-if [[ $FILENAME != firmware-* ]]; then
-  echo "Filename must be a firmware-* file."
-  exit 1
-fi
-
-# Check if FILENAME contains "-tft-" and prevent web/mui comingling.
-if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
-	TFT_BUILD=true
-	if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
-		echo "Cannot enable WebUI (--web) and MUI."
-		exit 1
-	fi
-fi
-
-# Extract BASENAME from %FILENAME% for later use.
-BASENAME="${FILENAME/firmware-/}"
-
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-	# Default littlefs* offset (--web).
-	OFFSET=0x300000
-
-	# Default OTA Offset
-	OTA_OFFSET=0x260000
-
-	# littlefs* offset for BigDB 8mb and OTA OFFSET.
-	for variant in "${BIGDB_8MB[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0x670000
-			OTA_OFFSET=0x340000
-		fi
-	done
-
-	# littlefs* offset for BigDB 16mb and OTA OFFSET.
-	for variant in "${BIGDB_16MB[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0xc90000
-			OTA_OFFSET=0x650000
-		fi
-	done
-
-	# Account for S3 board's different OTA partition
-	# FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
-	for variant in "${S3_VARIANTS[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			MCU="esp32s3"
-		fi
-	done
-
-	if [ "$MCU" != "esp32s3" ]; then
-		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			OTAFILE=bleota.bin
-		else
-			OTAFILE=bleota-c3.bin
-		fi
-	else
-		OTAFILE=bleota-s3.bin
-	fi
-
-	# Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
-	if [ "$WEB_APP" = true ]; then
-		SPIFFSFILE=littlefswebui-${BASENAME}
-	else
-		SPIFFSFILE=littlefs-${BASENAME}
-	fi
-
-	if [[ ! -f $FILENAME ]]; then
-		echo "Error: file ${FILENAME} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $OTAFILE ]]; then
-		echo "Error: file ${OTAFILE} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $SPIFFSFILE ]]; then
-		echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
-		exit 1
-	fi
-
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	$ESPTOOL_CMD erase_flash
 	$ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
-	echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-	$ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
-	echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-	$ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
+	# Account for S3 board's different OTA partition
+	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
+		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
+		else
+			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
+		fi
+	else
+		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
+	fi
+	if [ "$WEB_APP" = true ]; then
+		$ESPTOOL_CMD write_flash 0x300000 littlefswebui-*.bin
+	else
+		$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
+	fi
 
 else
 	show_help

bin/device-install_test.ps1

@@ -1,112 +0,0 @@
-<#
-    .SYNOPSIS
-    Unit-test for .\device-install.bat.
-
-    .DESCRIPTION
-    This script performs a positive unit-test on .\device-install.bat by creating the expected .bin
-    files for a device followed by running the .bat script without flashing the firmware (--debug).
-    If any errors are hit they are presented in the standard output. Investigate accordingly.
-
-    This script needs to be placed in the same directory as .\device-install.bat.
-
-    .EXAMPLE
-    .\device-install_test.ps1
-
-    .EXAMPLE
-    .\device-install_test.ps1 -Verbose
-
-    .LINK
-    .\device-install.bat --help
-#>
-
-[CmdletBinding()]
-param()
-
-function New-EmptyFile() {
-    [CmdletBinding()]
-    param (
-        [Parameter(Position = 0, Mandatory = $true)]
-        # Specifies the file name.
-        [string]$FileName,
-        [Parameter(Position = 1)]
-        # Specifies the target path. (Get-Location).Path is the default.
-        [string]$Directory = (Get-Location).Path
-    )
-
-    $filePath = Join-Path -Path $Directory -ChildPath $FileName
-
-    Write-Verbose -Message "Create empty test file if it doesn't exist: $($FileName)"
-    New-Item -Path "$filePath" -ItemType File -ErrorAction SilentlyContinue | Out-Null
-}
-
-function Remove-EmptyFile() {
-    [CmdletBinding()]
-    param (
-        [Parameter(Position = 0, Mandatory = $true)]
-        # Specifies the file name.
-        [string]$FileName,
-        [Parameter(Position = 1)]
-        # Specifies the target path. (Get-Location).Path is the default.
-        [string]$Directory = (Get-Location).Path
-    )
-
-    $filePath = Join-Path -Path $Directory -ChildPath $FileName
-
-    Write-Verbose -Message "Deleted empty test file: $($FileName)"
-    Remove-Item -Path "$filePath" | Out-Null
-}
-
-
-$TestCases = New-Object -TypeName PSObject -Property @{
-    # Use this PSObject to define testcases according to this syntax:
-    # "testname" = @("firmware-testname","bleota","littlefs-testname","args")
-    "t-deck"                       = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-2.6.0.0b106d4.bin", "")
-    "t-deck_web"                   = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-t-deck-2.6.0.0b106d4.bin", "--web")
-    "t-deck-tft"                   = @("firmware-t-deck-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-tft-2.6.0.0b106d4.bin", "")
-    "heltec-ht62-esp32c3"          = @("firmware-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "bleota-c3.bin", "littlefs-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "")
-    "tlora-c6"                     = @("firmware-tlora-c6-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-tlora-c6-2.6.0.0b106d4.bin", "")
-    "heltec-v3_web"                = @("firmware-heltec-v3-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-heltec-v3-2.6.0.0b106d4.bin", "--web")
-    "seeed-sensecap-indicator-tft" = @("firmware-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "")
-    "picomputer-s3-tft"            = @("firmware-picomputer-s3-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-picomputer-s3-tft-2.6.0.0b106d4.bin", "")
-}
-
-foreach ($TestCase in $TestCases.PSObject.Properties) {
-    $Name = $TestCase.Name
-    $Files = $TestCase.Value
-    $Errors = $null
-    $Counter = 0
-
-    Write-Host -Object "Testcase: $Name`:" -ForegroundColor Green
-    foreach ($File in $Files) {
-        if ($File.EndsWith(".bin")) {
-            New-EmptyFile -FileName $File
-        }
-    }
-
-    Write-Host -Object "Performing test on $Name..." -ForegroundColor Blue
-    $Test = Invoke-Expression -Command "cmd /c .\device-install.bat --debug -f $($TestCases."$Name"[0]) $($TestCases."$Name"[3])"
-
-    foreach ($Line in $Test) {
-        if ($Line -match "Set OTA_OFFSET to" -or `
-                $Line -match "Set SPIFFS_OFFSET to") {
-            Write-Host -Object "$($Line -replace "^.*?Set","Set")" -ForegroundColor Blue
-        }
-        elseif ($VerbosePreference -eq "Continue") {
-            Write-Host -Object $Line
-        }
-        if ($Line -match "ERROR") {
-            $Errors += $Line
-            $Counter++
-        }
-    }
-    if ($null -ne $Errors) {
-        Write-Host -Object "$Counter ERROR(s) detected!" -ForegroundColor Red
-        if (-not ($VerbosePreference -eq "Continue")) { Write-Host -Object $Errors }
-    }
-
-    foreach ($File in $Files) {
-        if ($File.EndsWith(".bin")) {
-            Remove-EmptyFile -FileName $File
-        }
-    }
-}

bin/device-update.bat

@@ -1,176 +1,48 @@
 @ECHO OFF
-SETLOCAL EnableDelayedExpansion
-TITLE Meshtastic device-update
 
-SET "SCRIPT_NAME=%~nx0"
-SET "DEBUG=0"
-SET "PYTHON="
-SET "ESPTOOL_BAUD=115200"
-SET "ESPTOOL_CMD="
-SET "LOGCOUNTER=0"
+set PYTHON=python
 
-GOTO getopts
-:help
-ECHO Flash image file to device, but leave existing system intact.
-ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python]
-ECHO.
-ECHO Options:
-ECHO     -f filename      The update .bin file to flash.  Custom to your device type and region. (required)
-ECHO                      The file must be located in this current directory.
-ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
-ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
-ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
-ECHO                      If supplied the script will use python.
-ECHO                      If not supplied the script will try to find esptool in Path.
-ECHO.
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
-GOTO eof
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
 
-:version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
-ECHO Meshtastic
-GOTO eof
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, leave existing system intact.
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
+goto EOF
 
-:getopts
-IF "%~1"=="" GOTO endopts
-IF /I "%~1"=="-?" GOTO help
-IF /I "%~1"=="-h" GOTO help
-IF /I "%~1"=="--help" GOTO help
-IF /I "%~1"=="-v" GOTO version
-IF /I "%~1"=="--version" GOTO version
-IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
-IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
-IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
 SHIFT
-GOTO getopts
-:endopts
+IF NOT "__%1__"=="____" goto GETOPTS
 
-CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
-IF "__!FILENAME!__"=="____" (
-    CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
-    GOTO help
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
-    IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
-        GOTO help
-    )
-    @REM Remove ".\" or "./" file prefix if present.
-    SET "FILENAME=!FILENAME:.\=!"
-    SET "FILENAME=!FILENAME:./=!"
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+    goto HELP
+)
+IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
+    echo Trying to flash update %FILENAME%
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
-IF NOT EXIST !FILENAME! (
-    CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
-    GOTO eof
-)
-
-IF "!FILENAME:update=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
-    CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
-    GOTO eof
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
-IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
-    CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
-    WHERE esptool >nul 2>&1
-    IF %ERRORLEVEL% EQU 0 (
-        @REM WHERE exits with code 0 if esptool is found.
-        SET "ESPTOOL_CMD=esptool"
-    ) ELSE (
-        SET "ESPTOOL_CMD=python -m esptool"
-        CALL :RESET_ERROR
-    )
-)
-
-CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
-!ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
-    CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
-    EXIT /B 1
-    GOTO eof
-)
-IF %DEBUG% EQU 1 (
-    CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
-    SET "ESPTOOL_CMD=REM !ESPTOOL_CMD!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
-IF "__!ESPTOOL_PORT!__" == "____" (
-    CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
-) ELSE (
-    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
-    CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
-)
-CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
-
-@REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Script complete!."
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
-
-
-:RUN_ESPTOOL
-@REM Subroutine used to run ESPTOOL_CMD with arguments.
-@REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
-@REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
-IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-CALL :RESET_ERROR
-!ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
-IF %ERRORLEVEL% NEQ 0 (
-    CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-    EXIT /B %ERRORLEVEL%
-)
-GOTO :eof
-
-:LOG_MESSAGE
-@REM Subroutine used to print log messages in four different levels.
-@REM DEBUG messages only get printed if [-d] flag is passed to script.
-@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
-@REM.
-@REM Example:: CALL :LOG_MESSAGE INFO "Message."
-SET /A LOGCOUNTER=LOGCOUNTER+1
-IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-GOTO :eof
-
-:GET_TIMESTAMP
-@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
-@REM CALL :GET_TIMESTAMP
-@REM.
-@REM Updates: !TIMESTAMP!
-FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
-    SET "HH=%%a"
-    SET "MM=%%b"
-    SET "ss=%%c"
-)
-SET "TIMESTAMP=!HH!:!MM!:!ss!"
-GOTO :eof
-
-:RESET_ERROR
-@REM Subroutine to reset %ERRORLEVEL% to 0.
-@REM CALL :RESET_ERROR
-@REM.
-@REM Updates: %ERRORLEVEL%
-EXIT /B 0
-GOTO :eof
+:EOF

bin/device-update.sh

@@ -35,8 +35,8 @@ while getopts ":hp:P:f:" opt; do
             show_help
             exit 0
             ;;
-        p)  ESPTOOL_CMD="$ESPTOOL_CMD --port ${OPTARG}"
-	        ;;
+        p)  export ESPTOOL_PORT=${OPTARG}
+	    ;;
         P)  PYTHON=${OPTARG}
             ;;
         f)  FILENAME=${OPTARG}

bin/meshtasticd.service

@@ -5,11 +5,10 @@ StartLimitInterval=200
 StartLimitBurst=5
 
 [Service]
-AmbientCapabilities=CAP_NET_BIND_SERVICE
-User=meshtasticd
-Group=meshtasticd
+User=root
+Group=root
 Type=simple
-ExecStart=/usr/bin/meshtasticd
+ExecStart=/usr/sbin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
+cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.desktop

@@ -1,8 +0,0 @@
-[Desktop Entry]
-Name=Meshtastic
-Comment=Meshtastic App
-Exec=meshtasticd
-Icon=org.meshtastic.meshtasticd
-Terminal=true
-Type=Application
-Categories=Network;Chat;HamRadio;

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -1,112 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-<component type="desktop-application">
-  <id>org.meshtastic.meshtasticd</id>
-
-  <name>Meshtastic</name>
-  <summary>Decentralized mesh communication</summary>
-
-  <metadata_license>CC-BY-4.0</metadata_license>
-  <project_license>GPL-3.0-or-later</project_license>
-
-  <developer id="org.meshtastic">
-    <name>Meshtastic</name>
-  </developer>
-
-  <description>
-    <p>
-      Meshtastic is an open source project for creating off-grid, affordable, and resilient communication with LoRa mesh networks.
-    </p>
-  </description>
-
-  <launchable type="desktop-id">org.meshtastic.meshtasticd.desktop</launchable>
-
-  <categories>
-    <category>Network</category>
-    <category>Chat</category>
-    <category>HamRadio</category>
-  </categories>
-  <keywords>
-    <keyword>mesh</keyword>
-    <keyword>LoRa</keyword>
-  </keywords>
-
-  <recommends>
-    <control>keyboard</control>
-    <control>pointing</control>
-    <control>touch</control>
-  </recommends>
-  <requires>
-    <display_length compare="ge">360</display_length>
-  </requires>
-
-  <branding>
-    <color type="primary" scheme_preference="light">#97be89</color>
-    <color type="primary" scheme_preference="dark">#206538</color>
-  </branding>
-
-  <content_rating type="oars-1.1">
-    <content_attribute id="social-chat">intense</content_attribute>
-    <content_attribute id="social-location">intense</content_attribute>
-  </content_rating>
-
-  <url type="bugtracker">https://github.com/meshtastic/firmware/issues</url>
-  <url type="homepage">https://meshtastic.org/</url>
-  <url type="donation">https://opencollective.com/meshtastic</url>
-  <url type="faq">https://meshtastic.org/docs/software/linux/usage/</url>
-  <url type="vcs-browser">https://github.com/meshtastic/firmware/</url>
-
-  <screenshots>
-    <screenshot type="default">
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_home_dashboard_dark.webp</image>
-      <caption>Home Dashboard</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_initial_boot.webp</image>
-      <caption>Setup</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_node_list_dark.webp</image>
-      <caption>Nodes List</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_list_dark.webp</image>
-      <caption>Chats List</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_message_dark.webp</image>
-      <caption>Messages</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_map_dark.webp</image>
-      <caption>Map</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_settings_dark.webp</image>
-      <caption>Settings</caption>
-    </screenshot>
-  </screenshots>
-
-  <releases>
-    <release version="2.6.10" date="2025-05-25">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.10</url>
-    </release>
-    <release version="2.6.9" date="2025-05-15">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.9</url>
-    </release>
-    <release version="2.6.8" date="2025-05-05">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.8</url>
-    </release>
-    <release version="2.6.7" date="2025-04-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.7</url>
-    </release>
-    <release version="2.6.6" date="2025-04-15">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.6</url>
-    </release>
-    <release version="2.6.5" date="2025-03-30">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.5</url>
-    </release>
-    <release version="2.6.4" date="2025-03-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.4</url>
-    </release>
-  </releases>
-</component>

bin/org.meshtastic.meshtasticd.svg

@@ -1,16 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
-<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
-<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" width="512" height="512" viewBox="0 0 512 512" xml:space="preserve">
-<desc>Created with Fabric.js 4.6.0</desc>
-<defs>
-</defs>
-<g transform="matrix(1 0 0 1 256 256)" id="xYQ9Gk9Jwpgj_HMOXB3F_"  >
-<path style="stroke: rgb(213,130,139); stroke-width: 0; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: miter; stroke-miterlimit: 4; fill: rgb(103,234,148); fill-rule: nonzero; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-256, -256)" d="M 0 0 L 512 0 L 512 512 L 0 512 z" stroke-linecap="round" />
-</g>
-<g transform="matrix(1.79 0 0 1.79 313.74 258.36)" id="1xBsk2n9FZp60Rz1O-ceJ"  >
-<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-250.97, -362.41)" d="M 250.908 330.267 L 193.126 415.005 L 180.938 406.694 L 244.802 313.037 C 246.174 311.024 248.453 309.819 250.889 309.816 C 253.326 309.814 255.606 311.015 256.982 313.026 L 320.994 406.536 L 308.821 414.869 L 250.908 330.267 Z" stroke-linecap="round" />
-</g>
-<g transform="matrix(1.81 0 0 1.81 145 256.15)" id="KxN7E9YpbyPgz0S4z4Cl6"  >
-<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-115.14, -528.06)" d="M 87.642 581.398 L 154.757 482.977 L 142.638 474.713 L 75.523 573.134 L 87.642 581.398 Z" stroke-linecap="round" />
-</g>
-</svg>

bin/platformio-custom.py

@@ -83,7 +83,7 @@ if platform.name == "espressif32":
 
 if platform.name == "nordicnrf52":
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
                                         "Generating UF2 file"))
 
 Import("projenv")
@@ -125,9 +125,4 @@ for flag in flags:
     
 projenv.Append(
     CCFLAGS=flags,
-)
-
-for lb in env.GetLibBuilders():
-    if lb.name == "meshtastic-device-ui":
-        lb.env.Append(CPPDEFINES=[("APP_VERSION", verObj["long"])])
-        break
+)

bin/regen-protos.bat

@@ -1,10 +1 @@
-@ECHO OFF
-SETLOCAL
-
-cd protobufs
-..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
-GOTO eof
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
+cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/rpkg.macros

@@ -2,10 +2,6 @@ function meshtastic_version {
     meshtastic_version=$(python3 bin/buildinfo.py short)
     echo -n "$meshtastic_version"
 }
-function web_version {
-    web_version=$(cat bin/web.version)
-    echo -n "$web_version"
-}
 function git_commits_num {
     total_commits=$(git rev-list --all --count)
     echo -n "$total_commits"

bin/uf2-convert.bat

@@ -1,124 +1,2 @@
-@ECHO OFF
-SETLOCAL EnableDelayedExpansion
-TITLE Meshtastic uf2-convert
-
-SET "SCRIPT_NAME=%~nx0"
-SET "DEBUG=0"
-SET "NRF=0"
-SET "UF2CONV_CMD=python3 .\bin\uf2conv.py"
-
-GOTO getopts
-:help
-ECHO.
-ECHO Usage: %SCRIPT_NAME% -t [t-echo^|rak4631^|nano-g2-ultra^|wio-tracker-wm1110^|canaryone^|
-ECHO                                 heltec-mesh-node-t114^|tracker-t1000-e^|rak_wismeshtap^|rak2560^|
-ECHO                                 nrf52_promicro_diy_tcxo]
-ECHO.
-ECHO Options:
-ECHO     -t target        Specify a platformio NRF target to build for. (required)
-ECHO.
-ECHO Example: %SCRIPT_NAME% -t rak4631
-GOTO eof
-
-:version
-ECHO %SCRIPT_NAME% [Version 2.6.0]
-ECHO Meshtastic
-GOTO eof
-
-:getopts
-IF "%~1"=="" GOTO endopts
-IF /I "%~1"=="-?" GOTO help
-IF /I "%~1"=="-h" GOTO help
-IF /I "%~1"=="--help" GOTO help
-IF /I "%~1"=="-v" GOTO version
-IF /I "%~1"=="--version" GOTO version
-IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
-IF /I "%~1"=="-t" SET "TARGETNAME=%~2" & SHIFT
-IF /I "%~1"=="--target" SET "TARGETNAME=%~2" & SHIFT
-SHIFT
-GOTO getopts
-:endopts
-
-CALL :LOG_MESSAGE DEBUG "Checking TARGETNAME parameter..."
-IF "__!TARGETNAME!__"=="____" (
-    CALL :LOG_MESSAGE DEBUG "Missing -t target input."
-    GOTO help
-)
-
-IF %DEBUG% EQU 1 SET "UF2CONV_CMD=REM python3 .\bin\uf2conv.py"
-
-SET "NRFTARGETS=t-echo rak4631 nano-g2-ultra wio-tracker-wm1110 canaryone heltec-mesh-node-t114 tracker-t1000-e rak_wismeshtap rak2560 nrf52_promicro_diy_tcxo"
-FOR %%a IN (%NRFTARGETS%) DO (
-    IF /I "%%a"=="!TARGETNAME!" (
-        @REM We are working with any of %NRFTARGETS%.
-        SET "NRF=1"
-        GOTO end_loop_nrf
-    )
-)
-:end_loop_nrf
-
-@REM Building operations.
-IF !NRF! EQU 1 (
-    CALL :LOG_MESSAGE INFO "Trying to build for !TARGETNAME!..."
-    CALL :RUN_UF2CONV !TARGETNAME! || GOTO eof
-) ELSE (
-    CALL :LOG_MESSAGE WARN "!TARGETNAME! is not supported..."
-    GOTO eof
-)
-
-CALL :LOG_MESSAGE INFO "Script complete!."
-
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
-
-
-:RUN_UF2CONV
-@REM Subroutine used to run .\bin\uf2conv.py with arguments.
-@REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_UF2CONV [target]
-@REM.
-@REM Example:: CALL :RUN_UF2CONV rak4631
-IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840"
-CALL :RESET_ERROR
-!UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840
-IF %ERRORLEVEL% NEQ 0 (
-    CALL :LOG_MESSAGE ERROR "Error running command: !UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840"
-    EXIT /B %ERRORLEVEL%
-)
-GOTO :eof
-
-:LOG_MESSAGE
-@REM Subroutine used to print log messages in four different levels.
-@REM DEBUG messages only get printed if [-d] flag is passed to script.
-@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
-@REM.
-@REM Example:: CALL :LOG_MESSAGE INFO "Message."
-SET /A LOGCOUNTER=LOGCOUNTER+1
-IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-GOTO :eof
-
-:GET_TIMESTAMP
-@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
-@REM CALL :GET_TIMESTAMP
-@REM.
-@REM Updates: !TIMESTAMP!
-FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
-    SET "HH=%%a"
-    SET "MM=%%b"
-    SET "ss=%%c"
-)
-SET "TIMESTAMP=!HH!:!MM!:!ss!"
-GOTO :eof
-
-:RESET_ERROR
-@REM Subroutine to reset %ERRORLEVEL% to 0.
-@REM CALL :RESET_ERROR
-@REM.
-@REM Updates: %ERRORLEVEL%
-EXIT /B 0
-GOTO :eof
+@echo off
+if [%1]==[] (echo "Please specify a platformio NRF target (i.e. rak4631) as the first argument.") else (python3 .\bin\uf2conv.py .\.pio\build\%1\firmware.hex -c -o .\.pio\build\%1\firmware.uf2 -f 0xADA52840)

bin/web.version

@@ -1 +0,0 @@
-2.5.3

boards/ThinkNode-M1.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_eink",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M1",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "elecrow eink",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "FIXME",
-  "vendor": "ELECROW"
-}

boards/crowpanel.json

@@ -1,43 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "ESP32-S3-WROOM-1-N16R8"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "ESP32-S3-WROOM-1-N16R8 (16 MB Flash, 8 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 524288,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "monitor": {
-    "speed": 115200
-  },
-  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
-  "vendor": "Espressif"
-}

boards/esp32-s3-pico.json

@@ -7,15 +7,13 @@
     "core": "esp32",
     "extra_flags": [
       "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DBOARD_HAS_PSRAM"
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "qio",
     "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/heltec_mesh_pocket.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "HT-n5262",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_pocket",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/project/meshpocket/",
-  "vendor": "Heltec"
-}

boards/heltec_vision_master_e213.json

@@ -2,8 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [
@@ -16,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_e290.json

@@ -2,8 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [
@@ -16,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_t190.json

@@ -2,8 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [
@@ -16,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/seeed-sensecap-indicator.json

@@ -18,7 +18,6 @@
     "f_boot": "120000000L",
     "boot": "qio",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [["0x1A86", "0x7523"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/seeed-xiao-s3.json

@@ -15,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [["0x2886", "0x0059"]],
     "mcu": "esp32s3",
     "variant": "seeed-xiao-s3"

boards/seeed_solar_node.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x2886", "0x0059"]],
-    "usb_product": "XIAO-BOOT",
-    "mcu": "nrf52840",
-    "variant": "seeed_solar_node",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "seeed_solar_node",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
-  "vendor": "Seeed Studio"
-}

boards/seeed_wio_tracker_L1.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x2886", "0x1668"]],
-    "usb_product": "TRACKER L1",
-    "mcu": "nrf52840",
-    "variant": "seeed_wio_tracker_L1",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "seeed_wio_tracker_L1",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.seeedstudio.com/Wio-Tracker-L1-p-6477.html",
-  "vendor": "Seeed Studio"
-}

boards/seeed_xiao_nrf52840_kit.json

@@ -1,56 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x2886", "0x0166"]
-    ],
-    "usb_product": "XIAO-BOOT",
-    "mcu": "nrf52840",
-    "variant": "seeed_xiao_nrf52840_kit",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "seeed_xiao_nrf52840_kit",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html",
-  "vendor": "seeed"
-}

boards/t-watch-s3.json

@@ -16,7 +16,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]
@@ -24,16 +23,16 @@
     "mcu": "esp32s3",
     "variant": "t-watch-s3"
   },
-  "connectivity": ["wifi", "bluetooth", "lora"],
+  "connectivity": ["wifi"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },
   "frameworks": ["arduino"],
   "name": "LilyGo T-Watch 2020 V3",
   "upload": {
-    "flash_size": "16MB",
+    "flash_size": "8MB",
     "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
+    "maximum_size": 8388608,
     "require_upload_port": true,
     "use_1200bps_touch": true,
     "wait_for_upload_port": true,

boards/wiscore_rak11300.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-DARDUINO_GENERIC_RP2040 -DRASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      ["0x2E8A", "0x00C0"],
+      ["0x2E8A", "0x000A"]
+    ],
+    "mcu": "rp2040",
+    "variant": "WisBlock_RAK11300_Board"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "WisBlock RAK11300",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": ["cmsis-dap", "raspberrypi-swd", "picotool", "picoprobe"]
+  },
+  "url": "https://docs.rakwireless.com/",
+  "vendor": "RAKwireless"
+}

debian/changelog

@@ -1,19 +1,9 @@
-meshtasticd (2.6.10.0) UNRELEASED; urgency=medium
+meshtasticd (2.5.22.0) UNRELEASED; urgency=medium
 
-  [ Austin Lane ]
   * Initial packaging
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
- --  <github-actions[bot]@users.noreply.github.com>  Sun, 25 May 2025 20:46:49 +0000
+ -- Austin Lane <github-actions[bot]@users.noreply.github.com>  Wed, 05 Feb 2025 01:10:33 +0000

debian/ci_pack_sdeb.sh

@@ -5,14 +5,13 @@ export PLATFORMIO_PACKAGES_DIR=pio/packages
 export PLATFORMIO_CORE_DIR=pio/core
 
 # Download libraries to `pio`
-platformio pkg install -e native-tft
-platformio pkg install -e native-tft -t platformio/tool-scons@4.40502.0
+platformio pkg install -e native
+platformio pkg install -e native -t platformio/tool-scons@4.40502.0
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
-# Download the meshtastic/web release build.tar to `web.tar`
-web_ver=$(cat bin/web.version)
-curl -L "https://github.com/meshtastic/web/releases/download/v$web_ver/build.tar" -o web.tar
+# Download the latest meshtastic/web release build.tar to `web.tar`
+curl -L https://github.com/meshtastic/web/releases/latest/download/build.tar -o web.tar
 
 package=$(dpkg-parsechangelog --show-field Source)
 

debian/control

@@ -17,23 +17,17 @@ Build-Depends: debhelper-compat (= 13),
                libbluetooth-dev,
                libusb-1.0-0-dev,
                libi2c-dev,
-               libuv1-dev,
                openssl,
                libssl-dev,
                libulfius-dev,
-               liborcania-dev,
-               libx11-dev,
-               libinput-dev,
-               libxkbcommon-x11-dev
+               liborcania-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no
 
 Package: meshtasticd
 Architecture: any
-Depends: adduser,
-         ${misc:Depends},
-         ${shlibs:Depends}
+Depends: ${misc:Depends}, ${shlibs:Depends}
 Description: Meshtastic daemon for communicating with Meshtastic devices
  Meshtastic is an off-grid text communication platform that uses inexpensive 
- LoRa radios.
+ LoRa radios.

debian/meshtasticd.dirs

@@ -1,6 +1,5 @@
-var/lib/meshtasticd
 etc/meshtasticd
 etc/meshtasticd/config.d
 etc/meshtasticd/available.d
 usr/share/meshtasticd/web
-etc/meshtasticd/ssl
+etc/meshtasticd/ssl

debian/meshtasticd.install

@@ -1,8 +1,8 @@
-.pio/build/native-tft/meshtasticd  usr/bin
+.pio/build/native/meshtasticd  usr/sbin
 
-bin/config.yaml                    etc/meshtasticd
-bin/config.d/*                     etc/meshtasticd/available.d
+bin/config.yaml                etc/meshtasticd
+bin/config.d/*                 etc/meshtasticd/available.d
 
-bin/meshtasticd.service            lib/systemd/system
+bin/meshtasticd.service        lib/systemd/system
 
-web/*                              usr/share/meshtasticd/web
+web/*                          usr/share/meshtasticd/web

debian/meshtasticd.postinst

@@ -1,80 +0,0 @@
-#!/bin/sh
-# postinst script for meshtasticd
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postinst> `configure' <most-recently-configured-version>
-#        * <old-postinst> `abort-upgrade' <new version>
-#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
-#          <new-version>
-#        * <postinst> `abort-remove'
-#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
-#          <failed-install-package> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    configure|reconfigure)
-    # create spi, gpio groups (for udev rules)
-    # these groups already exist on Raspberry Pi OS
-        getent group spi >/dev/null 2>/dev/null || addgroup --system spi
-        getent group gpio >/dev/null 2>/dev/null || addgroup --system gpio
-    # create a meshtasticd group and user
-        getent passwd meshtasticd >/dev/null 2>/dev/null || adduser --system --home /var/lib/meshtasticd --no-create-home meshtasticd
-        getent group meshtasticd >/dev/null 2>/dev/null || addgroup --system meshtasticd
-        adduser meshtasticd meshtasticd >/dev/null 2>/dev/null
-        adduser meshtasticd spi >/dev/null 2>/dev/null
-        adduser meshtasticd gpio >/dev/null 2>/dev/null
-    # add meshtasticd user to appropriate groups (if they exist)
-        getent group plugdev >/dev/null 2>/dev/null && adduser meshtasticd plugdev >/dev/null 2>/dev/null
-        getent group dialout >/dev/null 2>/dev/null && adduser meshtasticd dialout >/dev/null 2>/dev/null
-        getent group i2c >/dev/null 2>/dev/null && adduser meshtasticd i2c >/dev/null 2>/dev/null
-        getent group video >/dev/null 2>/dev/null && adduser meshtasticd video >/dev/null 2>/dev/null
-        getent group audio >/dev/null 2>/dev/null && adduser meshtasticd audio >/dev/null 2>/dev/null
-        getent group input >/dev/null 2>/dev/null && adduser meshtasticd input >/dev/null 2>/dev/null
-
-
-    # migrate /root/.portduino to /var/lib/meshtasticd/.portduino
-    # should only run once, upon upgrade from < 2.6.9
-    if [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.6.9; then
-        if [ -d /root/.portduino ] && [ ! -e /var/lib/meshtasticd/.portduino ]; then
-            cp -r /root/.portduino /var/lib/meshtasticd/.portduino
-            echo "Migrated meshtasticd VFS from /root/.portduino to /var/lib/meshtasticd/.portduino"
-            echo "meshtasticd now runs as the 'meshtasticd' user, not 'root'."
-            echo "See https://github.com/meshtastic/firmware/pull/6718 for details"
-        fi
-    fi
-
-    if [ -d /var/lib/meshtasticd ]; then
-        chown -R meshtasticd:meshtasticd /var/lib/meshtasticd
-    fi
-
-    if [ -d /etc/meshtasticd ]; then
-        chown -R meshtasticd:meshtasticd /etc/meshtasticd
-    fi
-
-    if [ -d /usr/share/meshtasticd ]; then
-        chown -R meshtasticd:meshtasticd /usr/share/meshtasticd
-    fi
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0

debian/meshtasticd.postrm

@@ -1,41 +0,0 @@
-#!/bin/sh
-# postrm script for meshtasticd
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postrm> `remove'
-#        * <postrm> `purge'
-#        * <old-postrm> `upgrade' <new-version>
-#        * <new-postrm> `failed-upgrade' <old-version>
-#        * <new-postrm> `abort-install'
-#        * <new-postrm> `abort-install' <old-version>
-#        * <new-postrm> `abort-upgrade' <old-version>
-#        * <disappearer's-postrm> `disappear' <overwriter>
-#          <overwriter-version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-      # Only remove /var/lib/meshtasticd on purge
-      if [ "${1}" = "purge" ] ; then
-          rm -rf /var/lib/meshtasticd
-      fi
-    ;;
-
-    *)
-        echo "postrm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0

debian/meshtasticd.udev

@@ -1,7 +0,0 @@
-# Set spidev ownership to 'spi' group
-SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
-# Allow access to USB CH341 devices
-SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
-# Set gpio ownership to 'gpio' group
-SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
-SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

debian/rules

@@ -26,7 +26,7 @@ override_dh_auto_build:
 	mkdir -p web && tar -xf web.tar -C web
 	gunzip web/ -r
 	# Build with platformio
-	$(PIO_ENV) platformio run -e native-tft
+	$(PIO_ENV) platformio run -e native
 	# Move the binary and default config to the correct name
-	mv .pio/build/native-tft/program .pio/build/native-tft/meshtasticd
+	mv .pio/build/native/program .pio/build/native/meshtasticd
 	cp bin/config-dist.yaml bin/config.yaml

extra_scripts/extra_stm32.py

@@ -1,22 +0,0 @@
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-
-Import("env")
-# Custom HEX from ELF
-env.AddPostAction(
-    "$BUILD_DIR/${PROGNAME}.elf",
-    env.VerboseAction(
-        " ".join(
-            [
-                "$OBJCOPY",
-                "-O",
-                "ihex",
-                "-R",
-                ".eeprom",
-                "$BUILD_DIR/${PROGNAME}.elf",
-                "$BUILD_DIR/${PROGNAME}.hex",
-            ]
-        ),
-        "Building $BUILD_DIR/${PROGNAME}.hex",
-    ),
-)

meshtasticd.spec.rpkg

@@ -10,8 +10,6 @@
 # - https://docs.pagure.org/rpkg-util/v3/index.html
 # - https://docs.fedoraproject.org/en-US/packaging-guidelines/Versioning/
 
-%global  meshtasticd_user          meshtasticd   
-
 Name:           meshtasticd
 # Version Ex:   2.5.19
 Version:        {{{ meshtastic_version }}}
@@ -23,7 +21,7 @@ Summary:        Meshtastic daemon for communicating with Meshtastic devices
 License:        GPL-3.0
 URL:            https://github.com/meshtastic/firmware
 Source0:        {{{ git_dir_pack }}}
-Source1:        https://github.com/meshtastic/web/releases/download/v{{{ web_version }}}/build.tar
+Source1:        https://github.com/meshtastic/web/releases/latest/download/build.tar
 
 BuildRequires: systemd-rpm-macros
 BuildRequires: python3-devel
@@ -38,18 +36,11 @@ BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)
 BuildRequires: pkgconfig(libusb-1.0)
 BuildRequires: libi2c-devel
-BuildRequires: pkgconfig(libuv)
 # Web components:
 BuildRequires: pkgconfig(openssl)
 BuildRequires: pkgconfig(liborcania)
 BuildRequires: pkgconfig(libyder)
 BuildRequires: pkgconfig(libulfius)
-# TFT components:
-BuildRequires: pkgconfig(x11)
-BuildRequires: pkgconfig(libinput)
-BuildRequires: pkgconfig(xkbcommon-x11)
-
-Requires:      systemd-udev
 
 %description
 Meshtastic daemon for controlling Meshtastic devices. Meshtastic is an off-grid
@@ -63,29 +54,19 @@ tar -xf %{SOURCE1} -C web
 gzip -dr web
 
 %build
-# Use the “native-tft” environment from platformio to build a Linux binary
-platformio run -e native-tft
+# Use the “native” environment from platformio to build a Linux binary
+platformio run -e native
 
 %install
-# Install meshtasticd binary
-mkdir -p %{buildroot}%{_bindir}
-install -m 0755 .pio/build/native-tft/program %{buildroot}%{_bindir}/meshtasticd
+mkdir -p %{buildroot}%{_sbindir}
+install -m 0755 .pio/build/native/program %{buildroot}%{_sbindir}/meshtasticd
 
-# Install portduino VFS dir
-install -p -d -m 0770 %{buildroot}%{_localstatedir}/lib/meshtasticd
-
-# Install udev rules
-mkdir -p %{buildroot}%{_udevrulesdir}
-install -m 0644 bin/99-meshtasticd-udev.rules %{buildroot}%{_udevrulesdir}/99-meshtasticd-udev.rules
-
-# Install config dirs
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd
 install -m 0644 bin/config-dist.yaml %{buildroot}%{_sysconfdir}/meshtasticd/config.yaml
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/config.d
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/available.d
 cp -r bin/config.d/* %{buildroot}%{_sysconfdir}/meshtasticd/available.d
 
-# Install systemd service
 install -D -m 0644 bin/meshtasticd.service %{buildroot}%{_unitdir}/meshtasticd.service
 
 # Install the web files under /usr/share/meshtasticd/web
@@ -94,54 +75,10 @@ cp -r web/* %{buildroot}%{_datadir}/meshtasticd/web
 # Install default SSL storage directory (for web)
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/ssl
 
-%pre
-# create spi group (for udev rules)
-getent group spi > /dev/null || groupadd -r spi
-# create a meshtasticd group and user
-getent group %{meshtasticd_user} > /dev/null || groupadd -r %{meshtasticd_user}
-getent passwd %{meshtasticd_user} > /dev/null || \
-    useradd -r -d %{_localstatedir}/lib/meshtasticd -g %{meshtasticd_user} -G spi \
-    -s /sbin/nologin -c "Meshtastic Daemon" %{meshtasticd_user}
-# add meshtasticd user to appropriate groups (if they exist)
-getent group gpio > /dev/null && usermod -a -G gpio %{meshtasticd_user} > /dev/null
-getent group plugdev > /dev/null && usermod -a -G plugdev %{meshtasticd_user} > /dev/null
-getent group dialout > /dev/null && usermod -a -G dialout %{meshtasticd_user} > /dev/null
-getent group i2c > /dev/null && usermod -a -G i2c %{meshtasticd_user} > /dev/null
-getent group video > /dev/null && usermod -a -G video %{meshtasticd_user} > /dev/null
-getent group audio > /dev/null && usermod -a -G audio %{meshtasticd_user} > /dev/null
-getent group input > /dev/null && usermod -a -G input %{meshtasticd_user} > /dev/null
-exit 0
-
-%triggerin -- meshtasticd < 2.6.9
-# migrate .portduino (if it exists and hasn’t already been copied)
-if [ -d /root/.portduino ] && [ ! -e /var/lib/meshtasticd/.portduino ]; then
-    mkdir -p /var/lib/meshtasticd
-    cp -r /root/.portduino /var/lib/meshtasticd/.portduino
-    chown -R %{meshtasticd_user}:%{meshtasticd_user} \
-        %{_localstatedir}/lib/meshtasticd || :
-    # Fix SELinux labels if present (no-op on non-SELinux systems)
-    restorecon -R /var/lib/meshtasticd/.portduino 2>/dev/null || :
-    echo "Migrated meshtasticd VFS from /root/.portduino to /var/lib/meshtasticd/.portduino"
-    echo "meshtasticd now runs as the 'meshtasticd' user, not 'root'."
-    echo "See https://github.com/meshtastic/firmware/pull/6718 for details"
-fi
-
-%post
-%systemd_post meshtasticd.service
-
-%preun
-%systemd_preun meshtasticd.service
-
-%postun
-%systemd_postun_with_restart meshtasticd.service
-
 %files
-%defattr(-,%{meshtasticd_user},%{meshtasticd_user})
 %license LICENSE
 %doc README.md
-%{_bindir}/meshtasticd
-%dir %{_localstatedir}/lib/meshtasticd
-%{_udevrulesdir}/99-meshtasticd-udev.rules
+%{_sbindir}/meshtasticd
 %dir %{_sysconfdir}/meshtasticd
 %dir %{_sysconfdir}/meshtasticd/config.d
 %dir %{_sysconfdir}/meshtasticd/available.d
@@ -154,4 +91,4 @@ fi
 %dir %{_sysconfdir}/meshtasticd/ssl
 
 %changelog
-%autochangelog
+%autochangelog

platformio.ini

@@ -7,8 +7,6 @@ default_envs = tbeam
 extra_configs =
 	arch/*/*.ini
 	variants/*/platformio.ini
-	src/graphics/niche/InkHUD/PlatformioConfig.ini
-
 description = Meshtastic
 
 [env]
@@ -50,26 +48,18 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
   	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
-	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
         #-DBUILD_EPOCH=$UNIX_TIME
         #-D OLED_PL=1
 
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
-	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
-	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
+	https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95
 	mathertel/OneButton@2.6.1
-	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
-	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
-	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
-	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
-	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
-	https://github.com/meshtastic/ArduinoThread/archive/7c3ee9e1951551b949763b1f5280f8db1fa4068d.zip
-	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
+	https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
+	https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
+	https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
 	nanopb/Nanopb@0.4.91
-	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
 	erriez/ErriezCRC32@1.0.1
 
 ; Used for the code analysis in PIO Home / Inspect
@@ -85,111 +75,59 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
-	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
 	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
-build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
+build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
-	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
+	knolleary/PubSubClient@2.8
+	arduino-libraries/NTPClient@3.1.0
 	arcao/Syslog@2.0.0
 
 [radiolib_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
 	jgromes/RadioLib@7.1.2
 
-[device-ui_base]
-lib_deps =
-	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/37e2fb84a8d1b7d8cc1e2ed00d34cfb1f284bd59.zip
-
 ; Common libs for environmental measurements in telemetry module
+; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.1
-	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
-	adafruit/Adafruit Unified Sensor@1.1.15
-	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
+	adafruit/Adafruit BusIO@1.16.2
+	adafruit/Adafruit Unified Sensor@1.1.14
 	adafruit/Adafruit BMP280 Library@2.6.8
-	# renovate: datasource=custom.pio depName=Adafruit BMP085 packageName=adafruit/library/Adafruit BMP085 Library
 	adafruit/Adafruit BMP085 Library@1.2.4
-	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
-	adafruit/Adafruit BME280 Library@2.3.0
-	# renovate: datasource=custom.pio depName=Adafruit DPS310 packageName=adafruit/library/Adafruit DPS310
-	adafruit/Adafruit DPS310@1.1.5
-	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
+	adafruit/Adafruit BME280 Library@2.2.4
+	adafruit/Adafruit BMP3XX Library@2.1.5
 	adafruit/Adafruit MCP9808 Library@2.0.2
-	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
 	adafruit/Adafruit INA260 Library@1.5.2
-	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
-	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
-	adafruit/Adafruit PM25 AQI Sensor@2.0.0
-	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
-	adafruit/Adafruit MPU6050@2.2.6
-	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
-	adafruit/Adafruit LIS3DH@1.3.0
-	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0
-	adafruit/Adafruit AHTX0@2.0.5
-	# renovate: datasource=custom.pio depName=Adafruit LSM6DS packageName=adafruit/library/Adafruit LSM6DS
-	adafruit/Adafruit LSM6DS@4.7.4
-	# renovate: datasource=custom.pio depName=Adafruit TSL2591 packageName=adafruit/library/Adafruit TSL2591 Library
-	adafruit/Adafruit TSL2591 Library@1.4.5
-	# renovate: datasource=custom.pio depName=EmotiBit MLX90632 packageName=emotibit/library/EmotiBit MLX90632
-	emotibit/EmotiBit MLX90632@1.0.8
-	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
-	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
-	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
-	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
-	mprograms/QMC5883LCompass@1.2.3
-	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
-	dfrobot/DFRobot_RTU@1.0.3
-	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
-	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
-	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.4
-	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
-	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
-	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
-	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.3.2
-	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
-	adafruit/Adafruit LTR390 Library@1.1.2
-	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.5
-  
-  ; (not included in native / portduino)
-[environmental_extra]
-lib_deps =
-	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
-	adafruit/Adafruit BMP3XX Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
 	adafruit/Adafruit MAX1704X@1.0.3
-	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
 	adafruit/Adafruit SHTC3 Library@1.0.1
-	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
 	adafruit/Adafruit LPS2X@2.0.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
 	adafruit/Adafruit SHT31 Library@2.2.2
-	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
+	adafruit/Adafruit PM25 AQI Sensor@1.1.1
+	adafruit/Adafruit MPU6050@2.2.6
+	adafruit/Adafruit LIS3DH@1.3.0
+	adafruit/Adafruit AHTX0@2.0.5
+	adafruit/Adafruit LSM6DS@4.7.3
 	adafruit/Adafruit VEML7700 Library@2.1.6
-	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
 	adafruit/Adafruit SHT4x Library@1.0.5
-	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
+	adafruit/Adafruit TSL2591 Library@1.4.5
 	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
-	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
+	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.2.13
 	ClosedCube OPT3001@1.1.2
-	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
-	boschsensortec/bsec2@1.10.2610
-	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
-	boschsensortec/BME68x Sensor Library@1.3.40408
-	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
-	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
+	emotibit/EmotiBit MLX90632@1.0.8
+	adafruit/Adafruit MLX90614 Library@2.1.5
+	https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
+	boschsensortec/BME68x Sensor Library@1.1.40407
+	https://github.com/KodinLanewave/INA3221@1.0.1
+	mprograms/QMC5883LCompass@1.2.3
+	dfrobot/DFRobot_RTU@1.0.3
+	https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d
+	https://github.com/DFRobot/DFRobot_RainfallSensor#38fea5e02b40a5430be6dab39a99a6f6347d667e
+	robtillaart/INA226@0.6.0
+
+	; Health Sensor Libraries
+	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2

renovate.json

@@ -1,99 +0,0 @@
-{
-  "$schema": "https://docs.renovatebot.com/renovate-schema.json",
-  "extends": [
-    ":dependencyDashboard",
-    ":semanticCommitTypeAll(chore)",
-    ":ignoreModulesAndTests",
-    "group:recommended",
-    "replacements:all",
-    "workarounds:all"
-  ],
-  "forkProcessing": "enabled",
-  "ignoreDeps": [
-    "protobufs"
-  ],
-  "git-submodules": {
-    "enabled": true
-  },
-  "pip_requirements": {
-    "managerFilePatterns": [
-      "/bin/bump_metainfo/requirements.txt/"
-    ]
-  },
-  "commitMessageTopic": "{{depName}}",
-  "labels": [
-    "dependencies"
-  ],
-  "customDatasources": {
-    "pio": {
-      "description": "PlatformIO Registry",
-      "defaultRegistryUrlTemplate": "https://api.registry.platformio.org/v3/packages/{{packageName}}",
-      "format": "json",
-      "transformTemplates": [
-        "{\"releases\": [$map($.versions, function($v) { { \"version\": $v.name, \"releaseTimestamp\": $v.released_at } })], \"homepage\": $encodeUrl($join([\"https://registry.platformio.org/\",$.type,\"/\",$.owner.username,\"/\",$.name])) }"
-      ]
-    }
-  },
-  "customManagers": [
-    {
-      "customType": "regex",
-      "description": "Match meshtastic/web version",
-      "managerFilePatterns": [
-        "/bin/web.version/"
-      ],
-      "matchStrings": [
-        "(?<currentValue>.+)$"
-      ],
-      "datasourceTemplate": "github-releases",
-      "depNameTemplate": "meshtastic/web",
-      "versioningTemplate": "semver-coerced"
-    },
-    {
-      "customType": "regex",
-      "description": "Match normal PIO dependencies",
-      "managerFilePatterns": [
-        "/.*\\.ini$/"
-      ],
-      "matchStrings": [
-        "# renovate: datasource=(?<datasource>.*?)(?: depName=(?<depName>.+?))? packageName=(?<packageName>.+?)(?: versioning=(?<versioning>[a-z-]+?))?\\s+?.+?@(?<currentValue>.+?)\\s"
-      ],
-      "versioningTemplate": "{{#if versioning}}{{{versioning}}}{{else}}semver-coerced{{/if}}"
-    },
-    {
-      "customType": "regex",
-      "description": "Match PIO zipped dependencies with github tag ref",
-      "managerFilePatterns": [
-        "/.*\\.ini$/"
-      ],
-      "matchStrings": [
-        "# renovate: datasource=github-tags(?: depName=(?<depName>.+?))? packageName=(?<packageName>.+?)(?: versioning=(?<versioning>[a-z-]+?))?\\s+?https://.+?archive/(?<currentValue>.+?).zip\\s"
-      ],
-      "datasourceTemplate": "github-tags",
-      "versioningTemplate": "{{#if versioning}}{{{versioning}}}{{else}}semver-coerced{{/if}}"
-    },
-    {
-      "customType": "regex",
-      "description": "Match PIO zipped dependencies with git commit ref",
-      "managerFilePatterns": [
-        "/.*\\.ini$/"
-      ],
-      "matchStrings": [
-        "# renovate: datasource=git-refs(?: depName=(?<depName>.+?))? packageName=(?<packageName>.+?)(?: versioning=(?<versioning>[a-z-]+?))?\\sgitBranch=(?<gitBranch>.+?)\\s+?https://.+?archive/(?<currentDigest>.+?).zip\\s"
-      ],
-      "datasourceTemplate": "git-refs",
-      "currentValueTemplate": "{{{gitBranch}}}",
-      "versioningTemplate": "{{#if versioning}}{{{versioning}}}{{else}}git{{/if}}"
-    }
-  ],
-  "packageRules": [
-    {
-      "matchDepNames": [
-        "meshtastic/device-ui"
-      ],
-      "reviewers": [
-        "mverch67"
-      ],
-      "changelogUrl": "https://github.com/meshtastic/device-ui/compare/{{currentDigest}}...{{newDigest}}"
-    }
-  ]
-}

src/AmbientLightingThread.h

@@ -6,11 +6,6 @@
 NCP5623 rgb;
 #endif
 
-#ifdef HAS_LP5562
-#include <graphics/NomadStarLED.h>
-LP5562 rgbw;
-#endif
-
 #ifdef HAS_NEOPIXEL
 #include <graphics/NeoPixel.h>
 Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
@@ -31,7 +26,7 @@ class AmbientLightingThread : public concurrency::OSThread
         notifyDeepSleepObserver.observe(&notifyDeepSleep); // Let us know when shutdown() is issued.
 
 // Enables Ambient Lighting by default if conditions are meet.
-#ifdef HAS_RGB_LED
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
 #ifdef ENABLE_AMBIENTLIGHTING
         moduleConfig.ambient_lighting.led_state = true;
 #endif
@@ -44,7 +39,7 @@ class AmbientLightingThread : public concurrency::OSThread
         // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
         // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
 
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
             LOG_DEBUG("AmbientLighting Disable due to no RGB leds found on I2C bus");
@@ -52,21 +47,17 @@ class AmbientLightingThread : public concurrency::OSThread
             return;
         }
 #endif
-#ifdef HAS_RGB_LED
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
         if (!moduleConfig.ambient_lighting.led_state) {
             LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
             disable();
             return;
         }
         LOG_DEBUG("AmbientLighting init");
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
 #endif
-#ifdef HAS_LP5562
-        } else if (_type == ScanI2C::LP5562) {
-            rgbw.begin();
-#endif
 #ifdef RGBLED_RED
             pinMode(RGBLED_RED, OUTPUT);
             pinMode(RGBLED_GREEN, OUTPUT);
@@ -79,7 +70,7 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
             setLighting();
 #endif
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         }
 #endif
     }
@@ -87,13 +78,13 @@ class AmbientLightingThread : public concurrency::OSThread
   protected:
     int32_t runOnce() override
     {
-#ifdef HAS_RGB_LED
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
-        if ((_type == ScanI2C::NCP5623 || _type == ScanI2C::LP5562) && moduleConfig.ambient_lighting.led_state) {
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef HAS_NCP5623
+        if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
 #endif
             setLighting();
             return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         }
 #endif
 #endif
@@ -117,14 +108,6 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setBlue(0);
         LOG_INFO("OFF: NCP5623 Ambient lighting");
 #endif
-#ifdef HAS_LP5562
-        rgbw.setCurrent(0);
-        rgbw.setRed(0);
-        rgbw.setGreen(0);
-        rgbw.setBlue(0);
-        rgbw.setWhite(0);
-        LOG_INFO("OFF: LP5562 Ambient lighting");
-#endif
 #ifdef HAS_NEOPIXEL
         pixels.clear();
         pixels.show();
@@ -158,14 +141,6 @@ class AmbientLightingThread : public concurrency::OSThread
         LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
                   moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
-#ifdef HAS_LP5562
-        rgbw.setCurrent(moduleConfig.ambient_lighting.current);
-        rgbw.setRed(moduleConfig.ambient_lighting.red);
-        rgbw.setGreen(moduleConfig.ambient_lighting.green);
-        rgbw.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init LP5562 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
-#endif
 #ifdef HAS_NEOPIXEL
         pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                                  moduleConfig.ambient_lighting.blue),

src/AudioThread.h

@@ -41,8 +41,10 @@ class AudioThread : public concurrency::OSThread
             delete i2sRtttl;
             i2sRtttl = nullptr;
         }
-        delete rtttlFile;
-        rtttlFile = nullptr;
+        if (rtttlFile != nullptr) {
+            delete rtttlFile;
+            rtttlFile = nullptr;
+        }
 
         setCPUFast(false);
     }

src/BluetoothStatus.h

@@ -30,7 +30,7 @@ class BluetoothStatus : public Status
     BluetoothStatus() { statusType = STATUS_TYPE_BLUETOOTH; }
 
     // New BluetoothStatus: connected or disconnected
-    explicit BluetoothStatus(ConnectionState state)
+    BluetoothStatus(ConnectionState state)
     {
         assert(state != ConnectionState::PAIRING); // If pairing, use constructor which specifies passkey
         statusType = STATUS_TYPE_BLUETOOTH;
@@ -38,7 +38,7 @@ class BluetoothStatus : public Status
     }
 
     // New BluetoothStatus: pairing, with passkey
-    explicit BluetoothStatus(const std::string &passkey) : Status()
+    BluetoothStatus(std::string passkey) : Status()
     {
         statusType = STATUS_TYPE_BLUETOOTH;
         this->state = ConnectionState::PAIRING;

src/ButtonThread.cpp

@@ -9,7 +9,6 @@
 #include "RadioLibInterface.h"
 #include "buzz.h"
 #include "main.h"
-#include "modules/CannedMessageModule.h"
 #include "modules/ExternalNotificationModule.h"
 #include "power.h"
 #include "sleep.h"
@@ -27,7 +26,6 @@
 using namespace concurrency;
 
 ButtonThread *buttonThread; // Declared extern in header
-extern CannedMessageModule *cannedMessageModule;
 volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
 
 #if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
@@ -49,7 +47,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #ifdef USERPREFS_BUTTON_PIN
     int pin = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN; // Resolved button pin
 #endif
-#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
+#if defined(HELTEC_CAPSULE_SENSOR_V3)
     this->userButton = OneButton(pin, false, false);
 #elif defined(BUTTON_ACTIVE_LOW)
     this->userButton = OneButton(pin, BUTTON_ACTIVE_LOW, BUTTON_ACTIVE_PULLUP);
@@ -75,28 +73,23 @@ ButtonThread::ButtonThread() : OSThread("Button")
     userButton.setDebounceMs(1);
     userButton.attachDoubleClick(userButtonDoublePressed);
     userButton.attachMultiClick(userButtonMultiPressed, this); // Reference to instance: get click count from non-static OneButton
-#if !defined(T_DECK) &&                                                                                                          \
-    !defined(                                                                                                                    \
-        ELECROW_ThinkNode_M2) // T-Deck immediately wakes up after shutdown, Thinknode M2 has this on the smaller ALT button
+#ifndef T_DECK // T-Deck immediately wakes up after shutdown, so disable this function
     userButton.attachLongPressStart(userButtonPressedLongStart);
     userButton.attachLongPressStop(userButtonPressedLongStop);
 #endif
 #endif
 
 #ifdef BUTTON_PIN_ALT
-#if defined(ELECROW_ThinkNode_M2)
-    this->userButtonAlt = OneButton(BUTTON_PIN_ALT, false, false);
-#else
-    this->userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
-#endif
+    userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
 #ifdef INPUT_PULLUP_SENSE
     // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
     pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
 #endif
-    userButtonAlt.attachClick(userButtonPressedScreen);
+    userButtonAlt.attachClick(userButtonPressed);
     userButtonAlt.setClickMs(BUTTON_CLICK_MS);
     userButtonAlt.setPressMs(BUTTON_LONGPRESS_MS);
     userButtonAlt.setDebounceMs(1);
+    userButtonAlt.attachDoubleClick(userButtonDoublePressed);
     userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
     userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
 #endif
@@ -118,60 +111,6 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #endif
 }
 
-void ButtonThread::switchPage()
-{
-    // Prevent screen switch if CannedMessageModule is focused and intercepting input
-#if HAS_SCREEN
-    extern CannedMessageModule *cannedMessageModule;
-
-    if (cannedMessageModule && cannedMessageModule->isInterceptingAndFocused()) {
-        LOG_DEBUG("User button ignored during canned message input");
-        return; // Skip screen change
-    }
-#endif
-
-    // Default behavior if not blocked
-#ifdef BUTTON_PIN
-#if !defined(USERPREFS_BUTTON_PIN)
-    if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
-         moduleConfig.canned_message.inputbroker_pin_press) ||
-        !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
-        !moduleConfig.canned_message.enabled) {
-        powerFSM.trigger(EVENT_PRESS);
-    }
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-    if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
-         moduleConfig.canned_message.inputbroker_pin_press) ||
-        !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
-        !moduleConfig.canned_message.enabled) {
-        powerFSM.trigger(EVENT_PRESS);
-    }
-#endif
-#endif
-
-#if defined(ARCH_PORTDUINO)
-    if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
-            (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
-        !moduleConfig.canned_message.enabled) {
-        powerFSM.trigger(EVENT_PRESS);
-    }
-#endif
-}
-
-void ButtonThread::sendAdHocPosition()
-{
-    service->refreshLocalMeshNode();
-    auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
-    if (screen) {
-        if (sentPosition)
-            screen->print("Sent ad-hoc position\n");
-        else
-            screen->print("Sent ad-hoc nodeinfo\n");
-        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
-    }
-}
-
 int32_t ButtonThread::runOnce()
 {
     // If the button is pressed we suppress CPU sleep until release
@@ -202,86 +141,65 @@ int32_t ButtonThread::runOnce()
             // If a nag notification is running, stop it and prevent other actions
             if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
                 externalNotificationModule->stopNow();
-                break;
+                return 50;
             }
-#ifdef ELECROW_ThinkNode_M1
-            sendAdHocPosition();
-            break;
+#ifdef BUTTON_PIN
+#if !defined(USERPREFS_BUTTON_PIN)
+            if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
 #endif
-            switchPage();
-            break;
-        }
-
-        case BUTTON_EVENT_PRESSED_SCREEN: {
-            LOG_BUTTON("AltPress!");
-#ifdef ELECROW_ThinkNode_M1
-            // If a nag notification is running, stop it and prevent other actions
-            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
-                externalNotificationModule->stopNow();
-                break;
+#if defined(USERPREFS_BUTTON_PIN)
+            if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
+#endif
+                 moduleConfig.canned_message.inputbroker_pin_press) ||
+                !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
+            }
+#endif
+#if defined(ARCH_PORTDUINO)
+            if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
+                    (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
             }
-            switchPage();
-            break;
 #endif
-            // turn screen on or off
-            screen_flag = !screen_flag;
-            if (screen)
-                screen->setOn(screen_flag);
             break;
         }
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
             LOG_BUTTON("Double press!");
-
-#ifdef ELECROW_ThinkNode_M1
-            digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-            break;
-#endif
-
-            // Send GPS position immediately
-            sendAdHocPosition();
-
-            // Show temporary on-screen confirmation banner for 3 seconds
-            screen->showOverlayBanner("Ad-hoc Ping Sent", 3000);
+            service->refreshLocalMeshNode();
+            auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
+            if (screen) {
+                if (sentPosition)
+                    screen->print("Sent ad-hoc position\n");
+                else
+                    screen->print("Sent ad-hoc nodeinfo\n");
+                screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+            }
             break;
         }
 
         case BUTTON_EVENT_MULTI_PRESSED: {
             LOG_BUTTON("Mulitipress! %hux", multipressClickCount);
             switch (multipressClickCount) {
-#if HAS_GPS && !defined(ELECROW_ThinkNode_M1)
+#if HAS_GPS
             // 3 clicks: toggle GPS
             case 3:
                 if (!config.device.disable_triple_click && (gps != nullptr)) {
                     gps->toggleGpsMode();
-
-                    const char *statusMsg = (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED)
-                                                ? "GPS Enabled"
-                                                : "GPS Disabled";
-
-                    if (screen) {
+                    if (screen)
                         screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
-                        screen->showOverlayBanner(statusMsg, 3000);
-                    }
                 }
                 break;
-#elif defined(ELECROW_ThinkNode_M1) || defined(ELECROW_ThinkNode_M2)
-            case 3:
-                LOG_INFO("3 clicks: toggle buzzer");
-                buzzer_flag = !buzzer_flag;
-                if (!buzzer_flag)
-                    noTone(PIN_BUZZER);
-                break;
-
 #endif
-
-#if defined(USE_EINK) && defined(PIN_EINK_EN) && !defined(ELECROW_ThinkNode_M1) // i.e. T-Echo
+#if defined(USE_EINK) && defined(PIN_EINK_EN) // i.e. T-Echo
             // 4 clicks: toggle backlight
             case 4:
                 digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
                 break;
 #endif
-#if !MESHTASTIC_EXCLUDE_SCREEN && HAS_SCREEN
+#if defined(RAK_4631)
             // 5 clicks: start accelerometer/magenetometer calibration for 30 seconds
             case 5:
                 if (accelerometerThread) {
@@ -306,12 +224,9 @@ int32_t ButtonThread::runOnce()
         case BUTTON_EVENT_LONG_PRESSED: {
             LOG_BUTTON("Long press!");
             powerFSM.trigger(EVENT_PRESS);
-
             if (screen) {
-                // Show shutdown message as a temporary overlay banner
-                screen->showOverlayBanner("Shutting Down..."); // Display for 3 seconds
+                screen->startAlert("Shutting down...");
             }
-
             playBeep();
             break;
         }
@@ -323,30 +238,20 @@ int32_t ButtonThread::runOnce()
             playShutdownMelody();
             delay(3000);
             power->shutdown();
-            nodeDB->saveToDisk();
             break;
         }
 
 #ifdef BUTTON_PIN_TOUCH
         case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
             LOG_BUTTON("Touch press!");
-            // Ignore if: no screen
-            if (!screen)
-                break;
+            if (screen) {
+                // Wake if asleep
+                if (powerFSM.getState() == &stateDARK)
+                    powerFSM.trigger(EVENT_PRESS);
 
-#ifdef TTGO_T_ECHO
-            // Ignore if: TX in progress
-            // Uncommon T-Echo hardware bug, LoRa TX triggers touch button
-            if (!RadioLibInterface::instance || RadioLibInterface::instance->isSending())
-                break;
-#endif
-
-            // Wake if asleep
-            if (powerFSM.getState() == &stateDARK)
-                powerFSM.trigger(EVENT_PRESS);
-
-            // Update display (legacy behaviour)
-            screen->forceDisplay();
+                // Update display (legacy behaviour)
+                screen->forceDisplay();
+            }
             break;
         }
 #endif // BUTTON_PIN_TOUCH
@@ -388,12 +293,8 @@ void ButtonThread::attachButtonInterrupts()
 #endif
 
 #ifdef BUTTON_PIN_ALT
-#ifdef ELECROW_ThinkNode_M2
-    wakeOnIrq(BUTTON_PIN_ALT, RISING);
-#else
     wakeOnIrq(BUTTON_PIN_ALT, FALLING);
 #endif
-#endif
 
 #ifdef BUTTON_PIN_TOUCH
     wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);

src/ButtonThread.h

@@ -24,7 +24,6 @@ class ButtonThread : public concurrency::OSThread
     enum ButtonEventType {
         BUTTON_EVENT_NONE,
         BUTTON_EVENT_PRESSED,
-        BUTTON_EVENT_PRESSED_SCREEN,
         BUTTON_EVENT_DOUBLE_PRESSED,
         BUTTON_EVENT_MULTI_PRESSED,
         BUTTON_EVENT_LONG_PRESSED,
@@ -37,16 +36,13 @@ class ButtonThread : public concurrency::OSThread
     void attachButtonInterrupts();
     void detachButtonInterrupts();
     void storeClickCount();
-    bool isBuzzing() { return buzzer_flag; }
-    void setScreenFlag(bool flag) { screen_flag = flag; }
-    bool getScreenFlag() { return screen_flag; }
-    bool isInterceptingAndFocused();
 
     // Disconnect and reconnect interrupts for light sleep
 #ifdef ARCH_ESP32
     int beforeLightSleep(void *unused);
     int afterLightSleep(esp_sleep_wakeup_cause_t cause);
 #endif
+
   private:
 #if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
     static OneButton userButton; // Static - accessed from an interrupt
@@ -68,20 +64,14 @@ class ButtonThread : public concurrency::OSThread
 
     // set during IRQ
     static volatile ButtonEventType btnEvent;
-    bool buzzer_flag = false;
-    bool screen_flag = true;
 
     // Store click count during callback, for later use
     volatile int multipressClickCount = 0;
 
     static void wakeOnIrq(int irq, int mode);
 
-    static void sendAdHocPosition();
-    static void switchPage();
-
     // IRQ callbacks
     static void userButtonPressed() { btnEvent = BUTTON_EVENT_PRESSED; }
-    static void userButtonPressedScreen() { btnEvent = BUTTON_EVENT_PRESSED_SCREEN; }
     static void userButtonDoublePressed() { btnEvent = BUTTON_EVENT_DOUBLE_PRESSED; }
     static void userButtonMultiPressed(void *callerThread); // Retrieve click count from non-static Onebutton while still valid
     static void userButtonPressedLongStart();

src/DebugConfiguration.h

@@ -121,15 +121,10 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
-#endif // HAS_ETHERNET
-
 #if HAS_WIFI
 #include <WiFi.h>
 #endif // HAS_WIFI
@@ -169,4 +164,4 @@ class Syslog
     bool vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
 };
 
-#endif // HAS_NETWORKING
+#endif // HAS_ETHERNET || HAS_WIFI

src/DisplayFormatters.cpp

@@ -27,6 +27,9 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
+        return useShortName ? "VeryL" : "VLongSlow";
+        break;
     default:
         return useShortName ? "Custom" : "Invalid";
         break;

src/FSCommon.cpp

@@ -12,14 +12,13 @@
 #include "SPILock.h"
 #include "configuration.h"
 
-// Software SPI is used by MUI so disable SD card here until it's also implemented
-#if defined(HAS_SDCARD) && !defined(SDCARD_USE_SOFT_SPI)
+#ifdef HAS_SDCARD
 #include <SD.h>
 #include <SPI.h>
 
 #ifdef SDCARD_USE_SPI1
-SPIClass SPI_HSPI(HSPI);
-#define SDHandler SPI_HSPI
+SPIClass SPI1(HSPI);
+#define SDHandler SPI1
 #else
 #define SDHandler SPI
 #endif
@@ -30,6 +29,30 @@ SPIClass SPI_HSPI(HSPI);
 
 #endif // HAS_SDCARD
 
+#if defined(ARCH_STM32WL)
+
+uint16_t OSFS::startOfEEPROM = 1;
+uint16_t OSFS::endOfEEPROM = 2048;
+
+// 3) How do I read from the medium?
+void OSFS::readNBytes(uint16_t address, unsigned int num, byte *output)
+{
+    for (uint16_t i = address; i < address + num; i++) {
+        *output = EEPROM.read(i);
+        output++;
+    }
+}
+
+// 4) How to I write to the medium?
+void OSFS::writeNBytes(uint16_t address, unsigned int num, const byte *input)
+{
+    for (uint16_t i = address; i < address + num; i++) {
+        EEPROM.update(i, *input);
+        input++;
+    }
+}
+#endif
+
 /**
  * @brief Copies a file from one location to another.
  *
@@ -39,7 +62,33 @@ SPIClass SPI_HSPI(HSPI);
  */
 bool copyFile(const char *from, const char *to)
 {
-#ifdef FSCom
+#ifdef ARCH_STM32WL
+    unsigned char cbuffer[2048];
+
+    // Var to hold the result of actions
+    OSFS::result r;
+
+    r = OSFS::getFile(from, cbuffer);
+
+    if (r == notfound) {
+        LOG_ERROR("Failed to open source file %s", from);
+        return false;
+    } else if (r == noerr) {
+        r = OSFS::newFile(to, cbuffer, true);
+        if (r == noerr) {
+            return true;
+        } else {
+            LOG_ERROR("OSFS Error %d", r);
+            return false;
+        }
+
+    } else {
+        LOG_ERROR("OSFS Error %d", r);
+        return false;
+    }
+    return true;
+
+#elif defined(FSCom)
     // take SPI Lock
     concurrency::LockGuard g(spiLock);
     unsigned char cbuffer[16];
@@ -78,7 +127,13 @@ bool copyFile(const char *from, const char *to)
  */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
-#ifdef FSCom
+#ifdef ARCH_STM32WL
+    if (copyFile(pathFrom, pathTo) && (OSFS::deleteFile(pathFrom) == OSFS::result::NO_ERROR)) {
+        return true;
+    } else {
+        return false;
+    }
+#elif defined(FSCom)
 
 #ifdef ARCH_ESP32
     // take SPI Lock
@@ -307,7 +362,7 @@ void fsInit()
  */
 void setupSDCard()
 {
-#if defined(HAS_SDCARD) && !defined(SDCARD_USE_SOFT_SPI)
+#ifdef HAS_SDCARD
     concurrency::LockGuard g(spiLock);
     SDHandler.begin(SPI_SCK, SPI_MISO, SPI_MOSI);
     if (!SD.begin(SDCARD_CS, SDHandler, SD_SPI_FREQUENCY)) {

src/FSCommon.h

@@ -15,11 +15,13 @@
 #endif
 
 #if defined(ARCH_STM32WL)
-// STM32WL
-#include "LittleFS.h"
-#define FSCom InternalFS
-#define FSBegin() FSCom.begin()
-using namespace STM32_LittleFS_Namespace;
+// STM32WL series 2 Kbytes (8 rows of 256 bytes)
+#include <EEPROM.h>
+#include <OSFS.h>
+
+// Useful consts
+const OSFS::result noerr = OSFS::result::NO_ERROR;
+const OSFS::result notfound = OSFS::result::FILE_NOT_FOUND;
 #endif
 
 #if defined(ARCH_RP2040)

src/Power.cpp

@@ -32,11 +32,6 @@
 #include <WiFi.h>
 #endif
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
-#endif // HAS_ETHERNET
-
 #endif
 
 #ifndef DELAY_FOREVER
@@ -76,47 +71,23 @@ static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE;
 #endif
 #endif
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-#if __has_include(<Adafruit_INA219.h>)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
 INA219Sensor ina219Sensor;
-#else
-NullSensor ina219Sensor;
-#endif
-
-#if __has_include(<INA226.h>)
 INA226Sensor ina226Sensor;
-#else
-NullSensor ina226Sensor;
-#endif
-
-#if __has_include(<Adafruit_INA260.h>)
 INA260Sensor ina260Sensor;
-#else
-NullSensor ina260Sensor;
-#endif
-
-#if __has_include(<INA3221.h>)
 INA3221Sensor ina3221Sensor;
-#else
-NullSensor ina3221Sensor;
 #endif
 
-#endif
-
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_STM32WL)
+#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
 #include "modules/Telemetry/Sensor/MAX17048Sensor.h"
 #include <utility>
 extern std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1];
 #if HAS_TELEMETRY && (!MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR || !MESHTASTIC_EXCLUDE_POWER_TELEMETRY)
-#if __has_include(<Adafruit_MAX1704X.h>)
 MAX17048Sensor max17048Sensor;
-#else
-NullSensor max17048Sensor;
-#endif
 #endif
 #endif
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && HAS_RAKPROT
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && HAS_RAKPROT && !defined(ARCH_PORTDUINO)
 RAK9154Sensor rak9154Sensor;
 #endif
 
@@ -227,7 +198,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
      */
     virtual int getBatteryPercent() override
     {
-#if defined(HAS_RAKPROT) && !defined(HAS_PMU)
+#if defined(HAS_RAKPROT) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
         if (hasRAK()) {
             return rak9154Sensor.getBusBatteryPercent();
         }
@@ -272,13 +243,15 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
-#if HAS_TELEMETRY && defined(HAS_RAKPROT) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if HAS_TELEMETRY && defined(HAS_RAKPROT) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU) &&                                    \
+    !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasRAK()) {
             return getRAKVoltage();
         }
 #endif
 
-#if HAS_TELEMETRY && !defined(ARCH_STM32WL) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
+    !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
             return getINAVoltage();
         }
@@ -402,20 +375,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
     // if we have a integrated device with a battery, we can assume that the battery is always connected
 #ifdef BATTERY_IMMUTABLE
     virtual bool isBatteryConnect() override { return true; }
-#elif defined(ADC_V)
-    virtual bool isBatteryConnect() override
-    {
-        int lastReading = digitalRead(ADC_V);
-        // 判断值是否变化
-        for (int i = 2; i < 500; i++) {
-            int reading = digitalRead(ADC_V);
-            if (reading != lastReading) {
-                return false; // 有变化，USB供电, 没接电池
-            }
-        }
-
-        return true;
-    }
 #else
     virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 #endif
@@ -427,7 +386,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual bool isVbusIn() override
     {
 #ifdef EXT_PWR_DETECT
-#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
+#ifdef HELTEC_CAPSULE_SENSOR_V3
         // if external powered that pin will be pulled down
         if (digitalRead(EXT_PWR_DETECT) == LOW) {
             return true;
@@ -448,7 +407,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /// we can't be smart enough to say 'full'?
     virtual bool isCharging() override
     {
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(HAS_RAKPROT) && !defined(HAS_PMU)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(HAS_RAKPROT) && !defined(ARCH_PORTDUINO) &&             \
+    !defined(HAS_PMU)
         if (hasRAK()) {
             return (rak9154Sensor.isCharging()) ? OptTrue : OptFalse;
         }
@@ -456,7 +416,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
 #else
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_STM32WL) &&                                       \
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) &&           \
     !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
             // get current flow from INA sensor - negative value means power flowing into the battery
@@ -471,8 +431,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         return isBatteryConnect() && isVbusIn();
 #endif
 #endif
-        // by default, we check the battery voltage only
-        return isVbusIn();
     }
 
   private:
@@ -503,7 +461,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     }
 #endif
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_STM32WL)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
     uint16_t getINAVoltage()
     {
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
@@ -578,7 +536,7 @@ Power::Power() : OSThread("Power")
 bool Power::analogInit()
 {
 #ifdef EXT_PWR_DETECT
-#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
+#ifdef HELTEC_CAPSULE_SENSOR_V3
     pinMode(EXT_PWR_DETECT, INPUT_PULLUP);
 #else
     pinMode(EXT_PWR_DETECT, INPUT);
@@ -705,12 +663,12 @@ void Power::readPowerStatus()
     int8_t batteryChargePercent = -1;
     OptionalBool usbPowered = OptUnknown;
     OptionalBool hasBattery = OptUnknown; // These must be static because NRF_APM code doesn't run every time
-    OptionalBool isChargingNow = OptUnknown;
+    OptionalBool isCharging = OptUnknown;
 
     if (batteryLevel) {
         hasBattery = batteryLevel->isBatteryConnect() ? OptTrue : OptFalse;
         usbPowered = batteryLevel->isVbusIn() ? OptTrue : OptFalse;
-        isChargingNow = batteryLevel->isCharging() ? OptTrue : OptFalse;
+        isCharging = batteryLevel->isCharging() ? OptTrue : OptFalse;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
             // If the AXP192 returns a valid battery percentage, use it
@@ -739,15 +697,15 @@ void Power::readPowerStatus()
 
     // If changed to DISCONNECTED
     if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED)
-        isChargingNow = usbPowered = OptFalse;
+        isCharging = usbPowered = OptFalse;
     // If changed to CONNECTED / READY
     else
-        isChargingNow = usbPowered = OptTrue;
+        isCharging = usbPowered = OptTrue;
 
 #endif
 
     // Notify any status instances that are observing us
-    const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
+    const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isCharging, batteryVoltageMv, batteryChargePercent);
     LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
               powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
     newStatus.notifyObservers(&powerStatus2);
@@ -793,7 +751,6 @@ void Power::readPowerStatus()
     // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
     // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
     //
-
     if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
         if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
             low_voltage_counter++;
@@ -853,8 +810,7 @@ int32_t Power::runOnce()
 #ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
             LOG_DEBUG("PEK long button press");
-            if (screen)
-                screen->setOn(false);
+            screen->setOn(false);
         }
 #endif
 

src/PowerFSM.cpp

@@ -19,7 +19,7 @@
 #include "sleep.h"
 #include "target_specific.h"
 
-#if HAS_WIFI && !defined(ARCH_PORTDUINO) || defined(MESHTASTIC_EXCLUDE_WIFI)
+#if HAS_WIFI && !defined(ARCH_PORTDUINO)
 #include "mesh/wifi/WiFiAPClient.h"
 #endif
 
@@ -82,8 +82,7 @@ static uint32_t secsSlept;
 static void lsEnter()
 {
     LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
-    if (screen)
-        screen->setOn(false);
+    screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
     // LOG_INFO("lsEnter end");
@@ -161,8 +160,7 @@ static void lsExit()
 static void nbEnter()
 {
     LOG_DEBUG("State: NB");
-    if (screen)
-        screen->setOn(false);
+    screen->setOn(false);
 #ifdef ARCH_ESP32
     // Only ESP32 should turn off bluetooth
     setBluetoothEnable(false);
@@ -174,26 +172,22 @@ static void nbEnter()
 static void darkEnter()
 {
     setBluetoothEnable(true);
-    if (screen)
-        screen->setOn(false);
+    screen->setOn(false);
 }
 
 static void serialEnter()
 {
     LOG_DEBUG("State: SERIAL");
     setBluetoothEnable(false);
-    if (screen) {
-        screen->setOn(true);
-        screen->print("Serial connected\n");
-    }
+    screen->setOn(true);
+    screen->print("Serial connected\n");
 }
 
 static void serialExit()
 {
     // Turn bluetooth back on when we leave serial stream API
     setBluetoothEnable(true);
-    if (screen)
-        screen->print("Serial disconnected\n");
+    screen->print("Serial disconnected\n");
 }
 
 static void powerEnter()
@@ -204,8 +198,7 @@ static void powerEnter()
         LOG_INFO("Loss of power in Powered");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     } else {
-        if (screen)
-            screen->setOn(true);
+        screen->setOn(true);
         setBluetoothEnable(true);
         // within enter() the function getState() returns the state we came from
 
@@ -228,8 +221,7 @@ static void powerIdle()
 
 static void powerExit()
 {
-    if (screen)
-        screen->setOn(true);
+    screen->setOn(true);
     setBluetoothEnable(true);
 
     // Mothballed: print change of power-state to device screen
@@ -240,8 +232,7 @@ static void powerExit()
 static void onEnter()
 {
     LOG_DEBUG("State: ON");
-    if (screen)
-        screen->setOn(true);
+    screen->setOn(true);
     setBluetoothEnable(true);
 }
 
@@ -255,8 +246,7 @@ static void onIdle()
 
 static void screenPress()
 {
-    if (screen)
-        screen->onPress();
+    screen->onPress();
 }
 
 static void bootEnter()
@@ -279,6 +269,9 @@ Fsm powerFSM(&stateBOOT);
 void PowerFSM_setup()
 {
     bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
     LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);
@@ -390,12 +383,6 @@ void PowerFSM_setup()
     // See: https://github.com/meshtastic/firmware/issues/1071
     // Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated
     // through the modules
-
-#if HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
-    bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
-                             config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
-                             config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
-
     if ((isRouter || config.power.is_power_saving) && !isWifiAvailable() && !isTrackerOrSensor) {
         powerFSM.add_timed_transition(&stateNB, &stateLS,
                                       Default::getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
@@ -413,9 +400,7 @@ void PowerFSM_setup()
                                       Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
                                       NULL, "Screen-on timeout");
     }
-#endif // HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
-
-#else // (not) ARCH_ESP32
+#else
     // If not ESP32, light-sleep not used. Check periodically if config has drifted out of stateDark
     powerFSM.add_timed_transition(&stateDARK, &stateDARK,
                                   Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
@@ -424,4 +409,4 @@ void PowerFSM_setup()
 
     powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
 }
-#endif
+#endif