Remove .tmp

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

.devcontainer/Dockerfile

@@ -29,11 +29,7 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     gpg \
     gnupg2 \
     libusb-1.0-0-dev \
-    libuv1-dev \
     libi2c-dev \
-    libxcb-xkb-dev \
-    libxkbcommon-dev \
-    libinput-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
 RUN pipx install platformio

.devcontainer/setup.sh

@@ -1,6 +1,3 @@
 #!/usr/bin/env sh
 
 git submodule update --init
-
-pip install --no-cache-dir setuptools
-pipx install esptool

.gitattributes

@@ -1,5 +1,4 @@
 * text=auto eol=lf
-*.cmd text eol=crlf
-*.bat text eol=crlf
-*.ps1 text eol=crlf
+*.{cmd,[cC][mM][dD]} text eol=crlf
+*.{bat,[bB][aA][tT]} text eol=crlf
 *.{sh,[sS][hH]} text eol=lf

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -72,15 +72,6 @@ body:
     validations:
       required: true
 
-  - type: checkboxes
-    id: mui
-    attributes:
-      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
-      options:
-        - label: Meshtastic UI aka MUI colorTFT
-        - label: InkHUD ePaper
-        - label: OLED slide UI on any display
-
   - type: input
     id: version
     attributes:

.github/actions/build-variant/action.yml

@@ -43,13 +43,6 @@ runs:
       id: base
       uses: ./.github/actions/setup-base
 
-    - name: Get web ui version
-      if: inputs.include-web-ui == 'true'
-      id: webver
-      shell: bash
-      run: |
-        echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
-
     - name: Pull web ui
       if: inputs.include-web-ui == 'true'
       uses: dsaltares/fetch-gh-release-asset@master
@@ -58,7 +51,7 @@ runs:
         file: build.tar
         target: build.tar
         token: ${{ inputs.github_token }}
-        version: tags/v${{ steps.webver.outputs.ver }}
+        version: tags/v2.5.3
 
     - name: Unpack web ui
       if: inputs.include-web-ui == 'true'

.github/actions/setup-native/action.yml

@@ -11,4 +11,4 @@ runs:
     - name: Install libs needed for native build
       shell: bash
       run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev
+        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev

.github/dependabot.yml

@@ -19,8 +19,6 @@ updates:
       interval: daily
       time: "05:00"
       timezone: US/Pacific
-    ignore:
-      - dependency-name: protobufs
   - package-ecosystem: github-actions
     directory: /.github/workflows
     schedule:

.github/pull_request_template.md

@@ -1,6 +1,7 @@
-## 🙏 Thank you for sending in a pull request, here's some tips to get started!
-
 ### ❌ (Please delete all these tips and replace them with your text) ❌
+
+## Thank you for sending in a pull request, here's some tips to get started!
+
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
@@ -11,17 +12,4 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
-- Please do not submit untested code.
-- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
-
-
-## 🤝 Attestations
-- [ ] I have tested that my proposed changes behave as described.
-- [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
-  - [ ] Heltec (Lora32) V3
-  - [ ] LilyGo T-Deck 
-  - [ ] LilyGo T-Beam
-  - [ ] RAK WisBlock 4631
-  - [ ] Seeed Studio T-1000E tracker card
-  - [ ] Other (please specify below)

.github/workflows/build_debian_src.yml

@@ -4,7 +4,7 @@ on:
   workflow_call:
     secrets:
       PPA_GPG_PRIVATE_KEY:
-        required: false
+        required: true
     inputs:
       series:
         description: Ubuntu/Debian series to target

.github/workflows/main_matrix.yml

@@ -136,7 +136,6 @@ jobs:
     secrets: inherit
 
   package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
     uses: ./.github/workflows/package_pio_deps.yml
     with:
       pio_env: native-tft
@@ -330,13 +329,13 @@ jobs:
         with:
           pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
           merge-multiple: true
-          path: ./output/pio-deps-native-tft
+          path: ./output/pio-deps-native
 
       - name: Zip linux sources
         working-directory: output
         run: |
           zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
+          zip -9 -r ./platformio-deps-native-${{ steps.version.outputs.long }}.zip ./pio-deps-native
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -345,10 +344,32 @@ jobs:
       - name: Add linux sources to release
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
-          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
+      - name: Bump version.properties
+        run: >-
+          bin/bump_version.py
+
+      - name: Ensure debian deps are installed
+        shell: bash
+        run: |
+          sudo apt-get update -y --fix-missing
+          sudo apt-get install -y devscripts
+
+      - name: Update debian changelog
+        run: >-
+          debian/ci_changelog.sh
+
+      - name: Create version.properties pull request
+        uses: peter-evans/create-pull-request@v7
+        with:
+          title: Bump version.properties
+          add-paths: |
+            version.properties
+            debian/changelog
+
   release-firmware:
     strategy:
       fail-fast: false

.github/workflows/release_channels.yml

@@ -43,49 +43,3 @@ jobs:
       copr_project: |-
         ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
     secrets: inherit
-
-  # Create a PR to bump version when a release is Published
-  bump-version:
-    if: ${{ github.event.release.published }}
-    runs-on: ubuntu-latest
-    permissions:
-      pull-requests: write
-      contents: write
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-
-      - name: Bump version.properties
-        run: >-
-          bin/bump_version.py
-
-      - name: Ensure debian deps are installed
-        shell: bash
-        run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y devscripts
-
-      - name: Update debian changelog
-        run: >-
-          debian/ci_changelog.sh
-
-      - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v7
-        with:
-          title: Bump version.properties
-          add-paths: |
-            version.properties
-            debian/changelog

.github/workflows/sec_sast_semgrep_cron.yml

@@ -6,14 +6,11 @@ on:
   schedule:
     - cron: 0 1 * * 6
 
-permissions:
-  actions: read
-  contents: read
-  security-events: write
+permissions: read-all
 
 jobs:
   semgrep-full:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     container:
       image: semgrep/semgrep
 

.github/workflows/stale_bot.yml

@@ -18,6 +18,5 @@ jobs:
       - name: Stale PR+Issues
         uses: actions/stale@v9.1.0
         with:
-          days-before-stale: 45
           exempt-issue-labels: pinned,3.0
           exempt-pr-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.0.0
+        uses: dorny/test-reporter@v1.9.1
         with:
           name: PlatformIO Tests
           path: testreport.xml

.gitmodules

@@ -1,6 +1,9 @@
 [submodule "protobufs"]
 	path = protobufs
 	url = https://github.com/meshtastic/protobufs.git
+[submodule "lib/device-ui"]
+	path = lib/device-ui
+	url = https://github.com/meshtastic/device-ui.git
 [submodule "meshtestic"]
 	path = meshtestic
 	url = https://github.com/meshtastic/meshTestic

.trunk/trunk.yaml

@@ -1,6 +1,6 @@
 version: 0.1
 cli:
-  version: 1.22.12
+  version: 1.22.10
 plugins:
   sources:
     - id: trunk
@@ -8,26 +8,27 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - prettier@3.5.3
-    - trufflehog@3.88.23
-    - yamllint@1.37.0
+    - prettier@3.5.2
+    - trufflehog@3.88.14
+    - yamllint@1.35.1
     - bandit@1.8.3
+    - checkov@3.2.378
     - terrascan@1.19.9
-    - trivy@0.61.0
+    - trivy@0.59.1
     - taplo@0.9.3
-    - ruff@0.11.4
+    - ruff@0.9.7
     - isort@6.0.1
     - markdownlint@0.44.0
     - oxipng@9.1.4
     - svgo@3.3.2
     - actionlint@1.7.7
-    - flake8@7.2.0
+    - flake8@7.1.2
     - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.24.2
+    - gitleaks@8.24.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

.vscode/settings.json

@@ -7,8 +7,5 @@
   "cmake.configureOnOpen": false,
   "[cpp]": {
     "editor.defaultFormatter": "trunk.io"
-  },
-  "[powershell]": {
-    "editor.defaultFormatter": "ms-vscode.powershell"
   }
 }

Dockerfile

@@ -12,8 +12,8 @@ ENV TZ=Etc/UTC
 # Install Dependencies
 ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
-        curl wget g++ zip git ca-certificates \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
+        wget g++ zip git ca-certificates \
+        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
         libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
@@ -27,12 +27,6 @@ COPY . /tmp/firmware
 RUN bash ./bin/build-native.sh && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
-# Fetch web assets
-RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/firmware/bin/web.version)/build.tar" -o /tmp/web.tar \
-    && mkdir -p /tmp/web \
-    && tar -xf /tmp/web.tar -C /tmp/web/ \
-    && gzip -dr /tmp/web \
-    && rm /tmp/web.tar
 
 ##### PRODUCTION BUILD #############
 
@@ -44,7 +38,7 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev liborcania2.3 libulfius2.7 libssl3 \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
@@ -52,7 +46,6 @@ RUN apt-get update && apt-get --no-install-recommends -y install \
 
 # Fetch compiled binary from the builder
 COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 
@@ -61,9 +54,7 @@ VOLUME /var/lib/meshtasticd
 
 # Expose Meshtastic TCP API port from the host
 EXPOSE 4403
-# Expose Meshtastic Web UI port from the host
-EXPOSE 443
 
 CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
 
-HEALTHCHECK NONE
+HEALTHCHECK NONE

alpine.Dockerfile

@@ -9,7 +9,7 @@ FROM python:3.13-alpine3.21 AS builder
 ENV PIP_ROOT_USER_ACTION=ignore
 RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
+        libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -32,7 +32,7 @@ FROM alpine:3.21
 USER root
 
 RUN apk --no-cache add \
-        libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
+        libstdc++ libgpiod yaml-cpp libusb i2c-tools \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

arch/esp32/esp32.ini

@@ -45,11 +45,11 @@ lib_deps =
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
   ${radiolib_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server/archive/23665b3adc080a311dcbb586ed5941b5f94d6ea2.zip
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.3
-  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
+  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
   lewisxhe/XPowersLib@^0.2.7
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
   rweather/Crypto@^0.4.0
 
 lib_ignore = 

arch/esp32/esp32c6.ini

@@ -1,6 +1,6 @@
 [esp32c6_base]
 extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
+platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
 build_flags =
   ${arduino_base.build_flags}
   -Wall
@@ -25,7 +25,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${radiolib_base.lib_deps}
   lewisxhe/XPowersLib@^0.2.7
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
   rweather/Crypto@^0.4.0
 
 build_src_filter = 

arch/nrf52/nrf52.ini

@@ -1,10 +1,10 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.8.0
+platform = platformio/nordicnrf52@^10.7.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino.git#e13f5820002a4fb2a5e6754b42ace185277e5adf
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
@@ -17,6 +17,7 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -DMAX_NUM_NODES=80
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>

arch/nrf52/nrf52840.ini

@@ -6,7 +6,7 @@ build_flags = ${nrf52_base.build_flags}
 lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/e31a8825ea3300b163a0a3c1ddd5de34e10e1371.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native/archive/c5bd469ab9b5a6966321e09557b27d906961da63.zip
+platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
 framework = arduino
 
 build_src_filter = 
@@ -26,7 +26,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
   lovyan03/LovyanGFX@^1.2.0
-  https://github.com/pine64/libch341-spi-userspace/archive/a9b17e3452f7fb747000d9b4ad4409155b39f6ef.zip
+  https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
 
 build_flags =
   ${arduino_base.build_flags}
@@ -34,12 +34,10 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
   -li2c
-  -luv
   -std=c++17

arch/rp2xx0/rp2040.ini

@@ -1,8 +1,8 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m

arch/rp2xx0/rp2350.ini

@@ -1,8 +1,8 @@
 ; Common settings for rp2040 Processor based targets
 [rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m

arch/stm32/stm32.ini

@@ -1,14 +1,13 @@
 [stm32_base]
 extends = arduino_base
-platform = ststm32
-platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
-extra_scripts =
-  ${env.extra_scripts}
-  post:extra_scripts/extra_stm32.py
+platform = platformio/ststm32
+platform_packages = platformio/framework-arduinoststm32@^4.20900.0
 
 build_type = release
 
-build_flags =
+;board_build.flash_offset = 0x08000000
+
+build_flags = 
   ${arduino_base.build_flags}
   -flto
   -Isrc/platform/stm32wl -g
@@ -19,24 +18,27 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN
   -DMESHTASTIC_EXCLUDE_MQTT
   -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  -DMESHTASTIC_EXCLUDE_PKI
   -DMESHTASTIC_EXCLUDE_GPS
-  ;-DDEBUG_MUTE
+;  -DVECT_TAB_OFFSET=0x08000000
+  -DconfigUSE_CMSIS_RTOS_V2=1
+;  -DSPI_MODE_0=SPI_MODE0
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-
-build_src_filter =
+  
+build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
-debug_tool = stlink
 
 lib_deps =
   ${env.lib_deps}
-  ${radiolib_base.lib_deps}
-  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
+  charlesbaynham/OSFS@^1.2.3
+  jgromes/RadioLib@7.0.2
+  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
   mathertel/OneButton@2.6.1
-  Wire
+  Wire

bin/config-dist.yaml

@@ -6,12 +6,6 @@
 ### Including the "Module:" line!
 ---
 Lora:
-  # Default to auto-detecting the module type
-  # This will be overridden by configs from config.d
-  Module: auto
-
-#  # Uncomment to enable Simulation mode, or use --sim
-#  Module: sim
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -197,6 +191,5 @@ General:
   MaxNodes: 200
   MaxMessageQueue: 100
   ConfigDirectory: /etc/meshtasticd/config.d/
-  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
-#  MACAddressSource: eth0
+#  MACAddressSource: eth0

bin/config.d/lora-Adafruit-RFM9x

@@ -0,0 +1,5 @@
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -1,6 +0,0 @@
-Lora:
-  Module: RF95  # Adafruit RFM9x
-  Reset: 25
-  CS: 7
-  IRQ: 22
-#  Busy: 23

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,5 +1,3 @@
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
 Lora:
   Module: sx1262
   CS: 21
@@ -11,4 +9,4 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   # Only for E22-900M33S:
   # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
+  # SX126X_MAX_POWER: 8

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -1,11 +0,0 @@
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Lora:
-  Module: sx1262  # Ebyte E22-900M22S 
-  CS: 8
-  IRQ: 16
-  Busy: 20
-  Reset: 24
-  TXen: 13
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -1,17 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  RXen: 1
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  # Optional: Reduce power to 10 dBm to
-  # avoid over-drawing the USB port
-  # SX126X_MAX_POWER: 10
-  # Optional: Set the serial number for multi-radio support
-  # USB_Serialnum: 13374201

bin/device-install.bat

@@ -1,295 +1,72 @@
 @ECHO OFF
-SETLOCAL EnableDelayedExpansion
-TITLE Meshtastic device-install
 
-SET "SCRIPT_NAME=%~nx0"
-SET "DEBUG=0"
-SET "PYTHON="
-SET "WEB_APP=0"
-SET "TFT_BUILD=0"
-SET "BIGDB8=0"
-SET "BIGDB16=0"
-SET "ESPTOOL_BAUD=115200"
-SET "ESPTOOL_CMD="
-SET "LOGCOUNTER=0"
+set PYTHON=python
+set WEB_APP=0
 
-@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
-SET "C3=esp32c3"
-@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core t-watch-s3 tracksenger"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite"
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
 
-GOTO getopts
-:help
-ECHO Flash image file to device, but first erasing and writing system information.
-ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web)
-ECHO.
-ECHO Options:
-ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
-ECHO                      The file must be located in this current directory.
-ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
-ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
-ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
-ECHO                      If supplied the script will use python.
-ECHO                      If not supplied the script will try to find esptool in Path.
-ECHO     --web            Enable WebUI. (default: false)
-ECHO.
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
-GOTO eof
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web]
+echo Flash image file to device, but first erasing and writing system information
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+echo     --web            Flash WEB APP.
+goto EOF
 
-:version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
-ECHO Meshtastic
-GOTO eof
-
-:getopts
-IF "%~1"=="" GOTO endopts
-IF /I "%~1"=="-?" GOTO help
-IF /I "%~1"=="-h" GOTO help
-IF /I "%~1"=="--help" GOTO help
-IF /I "%~1"=="-v" GOTO version
-IF /I "%~1"=="--version" GOTO version
-IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
-IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
-IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
-IF /I "%~1"=="--web" SET "WEB_APP=1"
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+if /I "%1"=="--web" set WEB_APP=1 & SHIFT
 SHIFT
-GOTO getopts
-:endopts
+IF NOT "__%1__"=="____" goto GETOPTS
 
-CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
-IF "__!FILENAME!__"=="____" (
-    CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
-    GOTO help
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
-    IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
-        GOTO help
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+    goto HELP
+)
+IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
+    echo Trying to flash update %FILENAME%, but first erasing and writing system information"
+    %ESPTOOL_CMD% --baud 115200 erase_flash
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
+    
+    @REM Account for S3 and C3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
+        IF x%FILENAME:esp32c3=%==x%FILENAME% (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
+        ) else (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
+        )
+    ) else (
+        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
     )
-    IF "__!FILENAME:firmware-=!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-* file."
-        GOTO help
+    IF %WEB_APP%==1 (
+        for %%f in (littlefswebui-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
+    ) else (
+        for %%f in (littlefs-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
     )
-    @REM Remove ".\" or "./" file prefix if present.
-    SET "FILENAME=!FILENAME:.\=!"
-    SET "FILENAME=!FILENAME:./=!"
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
-IF NOT EXIST !FILENAME! (
-    CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
-    GOTO eof
-)
-
-IF NOT "!FILENAME:update=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
-    CALL :LOG_MESSAGE INFO "Use script device-update.bat to flash update !FILENAME!."
-    GOTO eof
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
-IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
-    CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
-    WHERE esptool >nul 2>&1
-    IF %ERRORLEVEL% EQU 0 (
-        @REM WHERE exits with code 0 if esptool is found.
-        SET "ESPTOOL_CMD=esptool"
-    ) ELSE (
-        SET "ESPTOOL_CMD=python -m esptool"
-        CALL :RESET_ERROR
-    )
-)
-
-CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
-!ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
-    CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
-    EXIT /B 1
-    GOTO eof
-)
-IF %DEBUG% EQU 1 (
-    CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
-    SET "ESPTOOL_CMD=REM !ESPTOOL_CMD!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
-IF "__!ESPTOOL_PORT!__" == "____" (
-    CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
-) ELSE (
-    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
-    CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
-)
-CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
-
-@REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
-@REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
-IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
-    IF %WEB_APP% EQU 1 (
-        CALL :LOG_MESSAGE ERROR "Cannot enable WebUI (--web) and MUI." & GOTO eof
-    )
-    SET "TFT_BUILD=1"
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
-)
-
-FOR %%a IN (%BIGDB_8MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %BIGDB_8MB%.
-        SET "BIGDB8=1"
-        GOTO end_loop_bigdb_8mb
-    )
-)
-:end_loop_bigdb_8mb
-
-FOR %%a IN (%BIGDB_16MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %BIGDB_16MB%.
-        SET "BIGDB16=1"
-        GOTO end_loop_bigdb_16mb
-    )
-)
-:end_loop_bigdb_16mb
-
-IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
-IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
-
-@REM Extract BASENAME from %FILENAME% for later use.
-SET "BASENAME=!FILENAME:firmware-=!"
-CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
-
-@REM Account for S3 and C3 board's different OTA partition.
-FOR %%a IN (%S3%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %S3%.
-        SET "OTA_FILENAME=bleota-s3.bin"
-        GOTO :end_loop_s3
-    )
-)
-
-FOR %%a IN (%C3%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %C3%.
-        SET "OTA_FILENAME=bleota-c3.bin"
-        GOTO :end_loop_c3
-    )
-)
-
-@REM Everything else
-SET "OTA_FILENAME=bleota.bin"
-:end_loop_s3
-:end_loop_c3
-CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
-
-@REM Check if (--web) is enabled and prefix BASENAME with "littlefswebui-" else "littlefs-".
-IF %WEB_APP% EQU 1 (
-    CALL :LOG_MESSAGE INFO "WebUI selected."
-    SET "SPIFFS_FILENAME=littlefswebui-%BASENAME%"
-) ELSE (
-    SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
-)
-CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
-
-@REM Default offsets.
-@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
-SET "OTA_OFFSET=0x260000"
-SET "SPIFFS_OFFSET=0x300000"
-
-@REM Offsets for BigDB 8mb.
-IF %BIGDB8% EQU 1 (
-    SET "OTA_OFFSET=0x340000"
-    SET "SPIFFS_OFFSET=0x670000"
-)
-
-@REM Offsets for BigDB 16mb.
-IF %BIGDB16% EQU 1 (
-    SET "OTA_OFFSET=0x650000"
-    SET "SPIFFS_OFFSET=0xc90000"
-)
-
-CALL :LOG_MESSAGE DEBUG "Set OTA_OFFSET to: !OTA_OFFSET!"
-CALL :LOG_MESSAGE DEBUG "Set SPIFFS_OFFSET to: !SPIFFS_OFFSET!"
-
-@REM Ensure target files exist before flashing operations.
-IF NOT EXIST !FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
-IF NOT EXIST !OTA_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!OTA_FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
-IF NOT EXIST !SPIFFS_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!SPIFFS_FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
-
-@REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash "!FILENAME!", but first erasing and writing system information..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase_flash || GOTO eof
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x00 "!FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Trying to flash BLEOTA "!OTA_FILENAME!" at OTA_OFFSET !OTA_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Trying to flash SPIFFS "!SPIFFS_FILENAME!" at SPIFFS_OFFSET !SPIFFS_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Script complete!."
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
-
-
-:RUN_ESPTOOL
-@REM Subroutine used to run ESPTOOL_CMD with arguments.
-@REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
-@REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
-IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-CALL :RESET_ERROR
-!ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
-IF %ERRORLEVEL% NEQ 0 (
-    CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-    EXIT /B %ERRORLEVEL%
-)
-GOTO :eof
-
-:LOG_MESSAGE
-@REM Subroutine used to print log messages in four different levels.
-@REM DEBUG messages only get printed if [-d] flag is passed to script.
-@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
-@REM.
-@REM Example:: CALL :LOG_MESSAGE INFO "Message."
-SET /A LOGCOUNTER=LOGCOUNTER+1
-IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-GOTO :eof
-
-:GET_TIMESTAMP
-@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
-@REM CALL :GET_TIMESTAMP
-@REM.
-@REM Updates: !TIMESTAMP!
-FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
-    SET "HH=%%a"
-    SET "MM=%%b"
-    SET "ss=%%c"
-)
-SET "TIMESTAMP=!HH!:!MM!:!ss!"
-GOTO :eof
-
-:RESET_ERROR
-@REM Subroutine to reset %ERRORLEVEL% to 0.
-@REM CALL :RESET_ERROR
-@REM.
-@REM Updates: %ERRORLEVEL%
-EXIT /B 0
-GOTO :eof
+:EOF

bin/device-install.sh

@@ -1,60 +1,18 @@
-#!/bin/bash
+#!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 WEB_APP=false
-TFT_BUILD=false
-MCU=""
-
-# Variant groups
-BIGDB_8MB=(
-	"picomputer-s3"
-	"unphone"
-	"seeed-sensecap-indicator"
-	"crowpanel-esp32s3"
-	"heltec_capsule_sensor_v3"
-	"heltec-v3"
-	"heltec-vision-master-e213"
-	"heltec-vision-master-e290"
-	"heltec-vision-master-t190"
-	"heltec-wireless-paper"
-	"heltec-wireless-tracker"
-	"heltec-wsl-v3"
-	"icarus"
-	"seeed-xiao-s3"
-	"tbeam-s3-core"
-	"t-watch-s3"
-	"tracksenger"
-)
-BIGDB_16MB=(
-	"t-deck"
-	"mesh-tab"
-	"t-energy-s3"
-	"dreamcatcher"
-	"ESP32-S3-Pico"
-	"m5stack-cores3"
-	"station-g2"
-	"t-eth-elite"
-)
-S3_VARIANTS=(
-	"s3"
-	"-v3"
-	"t-deck"
-	"wireless-paper"
-	"wireless-tracker"
-	"station-g2"
-	"unphone"
-)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-	ESPTOOL_CMD="$PYTHON -m esptool"
+    ESPTOOL_CMD="$PYTHON -m esptool"
 elif command -v esptool >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool"
+    ESPTOOL_CMD="esptool"
 elif command -v esptool.py >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool.py"
+    ESPTOOL_CMD="esptool.py"
 else
-	echo "Error: esptool not found"
-	exit 1
+    echo "Error: esptool not found"
+    exit 1
 fi
 
 set -e
@@ -62,141 +20,75 @@ set -e
 # Usage info
 show_help() {
 	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web]
-Flash image file to device, but first erasing and writing system information.
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--web]
+Flash image file to device, but first erasing and writing system information"
 
-    -h               Display this help and exit.
+    -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
-    --web            Enable WebUI. (Default: false)
+    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+    --web            Flash WEB APP.
 
 EOF
 }
-# Parse arguments using a single while loop
-while [ $# -gt 0 ]; do
-	case "$1" in
-	-h | --help)
+# Preprocess long options like --web
+for arg in "$@"; do
+    case "$arg" in
+        --web)
+            WEB_APP=true
+            shift # Remove this argument from the list
+            ;;
+    esac
+done
+
+while getopts ":hp:P:f:" opt; do
+	case "${opt}" in
+	h)
 		show_help
 		exit 0
 		;;
-	-p)
-		ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
-		shift
+	p)
+		export ESPTOOL_PORT=${OPTARG}
 		;;
-	-P)
-		PYTHON="$2"
-		shift
+	P)
+		PYTHON=${OPTARG}
 		;;
-	-f)
-		FILENAME="$2"
-		shift
-		;;
-	--web)
-		WEB_APP=true
-		;;
-	--) # Stop parsing options
-		shift
-		break
+	f)
+		FILENAME=${OPTARG}
 		;;
 	*)
-		echo "Unknown argument: $1" >&2
+		echo "Invalid flag."
+		show_help >&2
 		exit 1
 		;;
 	esac
-	shift # Move to the next argument
 done
+shift "$((OPTIND - 1))"
 
 [ -z "$FILENAME" -a -n "$1" ] && {
 	FILENAME=$1
 	shift
 }
 
-if [[ $FILENAME != firmware-* ]]; then
-  echo "Filename must be a firmware-* file."
-  exit 1
-fi
-
-# Check if FILENAME contains "-tft-" and prevent web/mui comingling.
-if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
-	TFT_BUILD=true
-	if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
-		echo "Cannot enable WebUI (--web) and MUI."
-		exit 1
-	fi
-fi
-
-# Extract BASENAME from %FILENAME% for later use.
-BASENAME="${FILENAME/firmware-/}"
-
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-	# Default littlefs* offset (--web).
-	OFFSET=0x300000
-
-	# Default OTA Offset
-	OTA_OFFSET=0x260000
-
-	# littlefs* offset for BigDB 8mb and OTA OFFSET.
-	for variant in "${BIGDB_8MB[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0x670000
-			OTA_OFFSET=0x340000
-		fi
-	done
-
-	# littlefs* offset for BigDB 16mb and OTA OFFSET.
-	for variant in "${BIGDB_16MB[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0xc90000
-			OTA_OFFSET=0x650000
-		fi
-	done
-
-	# Account for S3 board's different OTA partition
-	# FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
-	for variant in "${S3_VARIANTS[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			MCU="esp32s3"
-		fi
-	done
-
-	if [ "$MCU" != "esp32s3" ]; then
-		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			OTAFILE=bleota.bin
-		else
-			OTAFILE=bleota-c3.bin
-		fi
-	else
-		OTAFILE=bleota-s3.bin
-	fi
-
-	# Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
-	if [ "$WEB_APP" = true ]; then
-		SPIFFSFILE=littlefswebui-${BASENAME}
-	else
-		SPIFFSFILE=littlefs-${BASENAME}
-	fi
-
-	if [[ ! -f $FILENAME ]]; then
-		echo "Error: file ${FILENAME} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $OTAFILE ]]; then
-		echo "Error: file ${OTAFILE} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $SPIFFSFILE ]]; then
-		echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
-		exit 1
-	fi
-
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	$ESPTOOL_CMD erase_flash
 	$ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
-	echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-	$ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
-	echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-	$ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
+	# Account for S3 board's different OTA partition
+	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
+		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
+		else
+			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
+		fi
+	else
+		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
+	fi
+	if [ "$WEB_APP" = true ]; then
+		$ESPTOOL_CMD write_flash 0x300000 littlefswebui-*.bin
+	else
+		$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
+	fi
 
 else
 	show_help

bin/device-install_test.ps1

@@ -1,112 +0,0 @@
-<#
-    .SYNOPSIS
-    Unit-test for .\device-install.bat.
-
-    .DESCRIPTION
-    This script performs a positive unit-test on .\device-install.bat by creating the expected .bin
-    files for a device followed by running the .bat script without flashing the firmware (--debug).
-    If any errors are hit they are presented in the standard output. Investigate accordingly.
-
-    This script needs to be placed in the same directory as .\device-install.bat.
-
-    .EXAMPLE
-    .\device-install_test.ps1
-
-    .EXAMPLE
-    .\device-install_test.ps1 -Verbose
-
-    .LINK
-    .\device-install.bat --help
-#>
-
-[CmdletBinding()]
-param()
-
-function New-EmptyFile() {
-    [CmdletBinding()]
-    param (
-        [Parameter(Position = 0, Mandatory = $true)]
-        # Specifies the file name.
-        [string]$FileName,
-        [Parameter(Position = 1)]
-        # Specifies the target path. (Get-Location).Path is the default.
-        [string]$Directory = (Get-Location).Path
-    )
-
-    $filePath = Join-Path -Path $Directory -ChildPath $FileName
-
-    Write-Verbose -Message "Create empty test file if it doesn't exist: $($FileName)"
-    New-Item -Path "$filePath" -ItemType File -ErrorAction SilentlyContinue | Out-Null
-}
-
-function Remove-EmptyFile() {
-    [CmdletBinding()]
-    param (
-        [Parameter(Position = 0, Mandatory = $true)]
-        # Specifies the file name.
-        [string]$FileName,
-        [Parameter(Position = 1)]
-        # Specifies the target path. (Get-Location).Path is the default.
-        [string]$Directory = (Get-Location).Path
-    )
-
-    $filePath = Join-Path -Path $Directory -ChildPath $FileName
-
-    Write-Verbose -Message "Deleted empty test file: $($FileName)"
-    Remove-Item -Path "$filePath" | Out-Null
-}
-
-
-$TestCases = New-Object -TypeName PSObject -Property @{
-    # Use this PSObject to define testcases according to this syntax:
-    # "testname" = @("firmware-testname","bleota","littlefs-testname","args")
-    "t-deck"                       = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-2.6.0.0b106d4.bin", "")
-    "t-deck_web"                   = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-t-deck-2.6.0.0b106d4.bin", "--web")
-    "t-deck-tft"                   = @("firmware-t-deck-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-tft-2.6.0.0b106d4.bin", "")
-    "heltec-ht62-esp32c3"          = @("firmware-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "bleota-c3.bin", "littlefs-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "")
-    "tlora-c6"                     = @("firmware-tlora-c6-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-tlora-c6-2.6.0.0b106d4.bin", "")
-    "heltec-v3_web"                = @("firmware-heltec-v3-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-heltec-v3-2.6.0.0b106d4.bin", "--web")
-    "seeed-sensecap-indicator-tft" = @("firmware-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "")
-    "picomputer-s3-tft"            = @("firmware-picomputer-s3-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-picomputer-s3-tft-2.6.0.0b106d4.bin", "")
-}
-
-foreach ($TestCase in $TestCases.PSObject.Properties) {
-    $Name = $TestCase.Name
-    $Files = $TestCase.Value
-    $Errors = $null
-    $Counter = 0
-
-    Write-Host -Object "Testcase: $Name`:" -ForegroundColor Green
-    foreach ($File in $Files) {
-        if ($File.EndsWith(".bin")) {
-            New-EmptyFile -FileName $File
-        }
-    }
-
-    Write-Host -Object "Performing test on $Name..." -ForegroundColor Blue
-    $Test = Invoke-Expression -Command "cmd /c .\device-install.bat --debug -f $($TestCases."$Name"[0]) $($TestCases."$Name"[3])"
-
-    foreach ($Line in $Test) {
-        if ($Line -match "Set OTA_OFFSET to" -or `
-                $Line -match "Set SPIFFS_OFFSET to") {
-            Write-Host -Object "$($Line -replace "^.*?Set","Set")" -ForegroundColor Blue
-        }
-        elseif ($VerbosePreference -eq "Continue") {
-            Write-Host -Object $Line
-        }
-        if ($Line -match "ERROR") {
-            $Errors += $Line
-            $Counter++
-        }
-    }
-    if ($null -ne $Errors) {
-        Write-Host -Object "$Counter ERROR(s) detected!" -ForegroundColor Red
-        if (-not ($VerbosePreference -eq "Continue")) { Write-Host -Object $Errors }
-    }
-
-    foreach ($File in $Files) {
-        if ($File.EndsWith(".bin")) {
-            Remove-EmptyFile -FileName $File
-        }
-    }
-}

bin/device-update.bat

@@ -1,176 +1,48 @@
 @ECHO OFF
-SETLOCAL EnableDelayedExpansion
-TITLE Meshtastic device-update
 
-SET "SCRIPT_NAME=%~nx0"
-SET "DEBUG=0"
-SET "PYTHON="
-SET "ESPTOOL_BAUD=115200"
-SET "ESPTOOL_CMD="
-SET "LOGCOUNTER=0"
+set PYTHON=python
 
-GOTO getopts
-:help
-ECHO Flash image file to device, but leave existing system intact.
-ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python]
-ECHO.
-ECHO Options:
-ECHO     -f filename      The update .bin file to flash.  Custom to your device type and region. (required)
-ECHO                      The file must be located in this current directory.
-ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
-ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
-ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
-ECHO                      If supplied the script will use python.
-ECHO                      If not supplied the script will try to find esptool in Path.
-ECHO.
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
-GOTO eof
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
 
-:version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
-ECHO Meshtastic
-GOTO eof
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, leave existing system intact.
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
+goto EOF
 
-:getopts
-IF "%~1"=="" GOTO endopts
-IF /I "%~1"=="-?" GOTO help
-IF /I "%~1"=="-h" GOTO help
-IF /I "%~1"=="--help" GOTO help
-IF /I "%~1"=="-v" GOTO version
-IF /I "%~1"=="--version" GOTO version
-IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
-IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
-IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
 SHIFT
-GOTO getopts
-:endopts
+IF NOT "__%1__"=="____" goto GETOPTS
 
-CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
-IF "__!FILENAME!__"=="____" (
-    CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
-    GOTO help
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
-    IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
-        GOTO help
-    )
-    @REM Remove ".\" or "./" file prefix if present.
-    SET "FILENAME=!FILENAME:.\=!"
-    SET "FILENAME=!FILENAME:./=!"
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+    goto HELP
+)
+IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
+    echo Trying to flash update %FILENAME%
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
-IF NOT EXIST !FILENAME! (
-    CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
-    GOTO eof
-)
-
-IF "!FILENAME:update=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
-    CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
-    GOTO eof
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
-IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
-    CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
-    WHERE esptool >nul 2>&1
-    IF %ERRORLEVEL% EQU 0 (
-        @REM WHERE exits with code 0 if esptool is found.
-        SET "ESPTOOL_CMD=esptool"
-    ) ELSE (
-        SET "ESPTOOL_CMD=python -m esptool"
-        CALL :RESET_ERROR
-    )
-)
-
-CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
-!ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
-    CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
-    EXIT /B 1
-    GOTO eof
-)
-IF %DEBUG% EQU 1 (
-    CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
-    SET "ESPTOOL_CMD=REM !ESPTOOL_CMD!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
-IF "__!ESPTOOL_PORT!__" == "____" (
-    CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
-) ELSE (
-    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
-    CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
-)
-CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
-
-@REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Script complete!."
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
-
-
-:RUN_ESPTOOL
-@REM Subroutine used to run ESPTOOL_CMD with arguments.
-@REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
-@REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
-IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-CALL :RESET_ERROR
-!ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
-IF %ERRORLEVEL% NEQ 0 (
-    CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-    EXIT /B %ERRORLEVEL%
-)
-GOTO :eof
-
-:LOG_MESSAGE
-@REM Subroutine used to print log messages in four different levels.
-@REM DEBUG messages only get printed if [-d] flag is passed to script.
-@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
-@REM.
-@REM Example:: CALL :LOG_MESSAGE INFO "Message."
-SET /A LOGCOUNTER=LOGCOUNTER+1
-IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-GOTO :eof
-
-:GET_TIMESTAMP
-@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
-@REM CALL :GET_TIMESTAMP
-@REM.
-@REM Updates: !TIMESTAMP!
-FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
-    SET "HH=%%a"
-    SET "MM=%%b"
-    SET "ss=%%c"
-)
-SET "TIMESTAMP=!HH!:!MM!:!ss!"
-GOTO :eof
-
-:RESET_ERROR
-@REM Subroutine to reset %ERRORLEVEL% to 0.
-@REM CALL :RESET_ERROR
-@REM.
-@REM Updates: %ERRORLEVEL%
-EXIT /B 0
-GOTO :eof
+:EOF

bin/device-update.sh

@@ -35,8 +35,8 @@ while getopts ":hp:P:f:" opt; do
             show_help
             exit 0
             ;;
-        p)  ESPTOOL_CMD="$ESPTOOL_CMD --port ${OPTARG}"
-	        ;;
+        p)  export ESPTOOL_PORT=${OPTARG}
+	    ;;
         P)  PYTHON=${OPTARG}
             ;;
         f)  FILENAME=${OPTARG}

bin/platformio-custom.py

@@ -83,7 +83,7 @@ if platform.name == "espressif32":
 
 if platform.name == "nordicnrf52":
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
                                         "Generating UF2 file"))
 
 Import("projenv")
@@ -125,9 +125,4 @@ for flag in flags:
     
 projenv.Append(
     CCFLAGS=flags,
-)
-
-for lb in env.GetLibBuilders():
-    if lb.name == "meshtastic-device-ui":
-        lb.env.Append(CPPDEFINES=[("APP_VERSION", verObj["long"])])
-        break
+)

bin/regen-protos.bat

@@ -1,10 +1 @@
-@ECHO OFF
-SETLOCAL
-
-cd protobufs
-..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
-GOTO eof
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
+cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/rpkg.macros

@@ -2,10 +2,6 @@ function meshtastic_version {
     meshtastic_version=$(python3 bin/buildinfo.py short)
     echo -n "$meshtastic_version"
 }
-function web_version {
-    web_version=$(cat bin/web.version)
-    echo -n "$web_version"
-}
 function git_commits_num {
     total_commits=$(git rev-list --all --count)
     echo -n "$total_commits"

bin/uf2-convert.bat

@@ -1,124 +1,2 @@
-@ECHO OFF
-SETLOCAL EnableDelayedExpansion
-TITLE Meshtastic uf2-convert
-
-SET "SCRIPT_NAME=%~nx0"
-SET "DEBUG=0"
-SET "NRF=0"
-SET "UF2CONV_CMD=python3 .\bin\uf2conv.py"
-
-GOTO getopts
-:help
-ECHO.
-ECHO Usage: %SCRIPT_NAME% -t [t-echo^|rak4631^|nano-g2-ultra^|wio-tracker-wm1110^|canaryone^|
-ECHO                                 heltec-mesh-node-t114^|tracker-t1000-e^|rak_wismeshtap^|rak2560^|
-ECHO                                 nrf52_promicro_diy_tcxo]
-ECHO.
-ECHO Options:
-ECHO     -t target        Specify a platformio NRF target to build for. (required)
-ECHO.
-ECHO Example: %SCRIPT_NAME% -t rak4631
-GOTO eof
-
-:version
-ECHO %SCRIPT_NAME% [Version 2.6.0]
-ECHO Meshtastic
-GOTO eof
-
-:getopts
-IF "%~1"=="" GOTO endopts
-IF /I "%~1"=="-?" GOTO help
-IF /I "%~1"=="-h" GOTO help
-IF /I "%~1"=="--help" GOTO help
-IF /I "%~1"=="-v" GOTO version
-IF /I "%~1"=="--version" GOTO version
-IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
-IF /I "%~1"=="-t" SET "TARGETNAME=%~2" & SHIFT
-IF /I "%~1"=="--target" SET "TARGETNAME=%~2" & SHIFT
-SHIFT
-GOTO getopts
-:endopts
-
-CALL :LOG_MESSAGE DEBUG "Checking TARGETNAME parameter..."
-IF "__!TARGETNAME!__"=="____" (
-    CALL :LOG_MESSAGE DEBUG "Missing -t target input."
-    GOTO help
-)
-
-IF %DEBUG% EQU 1 SET "UF2CONV_CMD=REM python3 .\bin\uf2conv.py"
-
-SET "NRFTARGETS=t-echo rak4631 nano-g2-ultra wio-tracker-wm1110 canaryone heltec-mesh-node-t114 tracker-t1000-e rak_wismeshtap rak2560 nrf52_promicro_diy_tcxo"
-FOR %%a IN (%NRFTARGETS%) DO (
-    IF /I "%%a"=="!TARGETNAME!" (
-        @REM We are working with any of %NRFTARGETS%.
-        SET "NRF=1"
-        GOTO end_loop_nrf
-    )
-)
-:end_loop_nrf
-
-@REM Building operations.
-IF !NRF! EQU 1 (
-    CALL :LOG_MESSAGE INFO "Trying to build for !TARGETNAME!..."
-    CALL :RUN_UF2CONV !TARGETNAME! || GOTO eof
-) ELSE (
-    CALL :LOG_MESSAGE WARN "!TARGETNAME! is not supported..."
-    GOTO eof
-)
-
-CALL :LOG_MESSAGE INFO "Script complete!."
-
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
-
-
-:RUN_UF2CONV
-@REM Subroutine used to run .\bin\uf2conv.py with arguments.
-@REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_UF2CONV [target]
-@REM.
-@REM Example:: CALL :RUN_UF2CONV rak4631
-IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840"
-CALL :RESET_ERROR
-!UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840
-IF %ERRORLEVEL% NEQ 0 (
-    CALL :LOG_MESSAGE ERROR "Error running command: !UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840"
-    EXIT /B %ERRORLEVEL%
-)
-GOTO :eof
-
-:LOG_MESSAGE
-@REM Subroutine used to print log messages in four different levels.
-@REM DEBUG messages only get printed if [-d] flag is passed to script.
-@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
-@REM.
-@REM Example:: CALL :LOG_MESSAGE INFO "Message."
-SET /A LOGCOUNTER=LOGCOUNTER+1
-IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-GOTO :eof
-
-:GET_TIMESTAMP
-@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
-@REM CALL :GET_TIMESTAMP
-@REM.
-@REM Updates: !TIMESTAMP!
-FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
-    SET "HH=%%a"
-    SET "MM=%%b"
-    SET "ss=%%c"
-)
-SET "TIMESTAMP=!HH!:!MM!:!ss!"
-GOTO :eof
-
-:RESET_ERROR
-@REM Subroutine to reset %ERRORLEVEL% to 0.
-@REM CALL :RESET_ERROR
-@REM.
-@REM Updates: %ERRORLEVEL%
-EXIT /B 0
-GOTO :eof
+@echo off
+if [%1]==[] (echo "Please specify a platformio NRF target (i.e. rak4631) as the first argument.") else (python3 .\bin\uf2conv.py .\.pio\build\%1\firmware.hex -c -o .\.pio\build\%1\firmware.uf2 -f 0xADA52840)

bin/web.version

@@ -1 +0,0 @@
-2.6.0

boards/ThinkNode-M1.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_eink",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M1",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "elecrow eink",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "FIXME",
-  "vendor": "ELECROW"
-}

boards/esp32-s3-pico.json

@@ -7,15 +7,13 @@
     "core": "esp32",
     "extra_flags": [
       "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DBOARD_HAS_PSRAM"
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "qio",
     "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/heltec_vision_master_e213.json

@@ -2,8 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [
@@ -16,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_e290.json

@@ -2,8 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [
@@ -16,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_t190.json

@@ -2,8 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [
@@ -16,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/seeed-sensecap-indicator.json

@@ -18,7 +18,6 @@
     "f_boot": "120000000L",
     "boot": "qio",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [["0x1A86", "0x7523"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/seeed-xiao-s3.json

@@ -15,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [["0x2886", "0x0059"]],
     "mcu": "esp32s3",
     "variant": "seeed-xiao-s3"

boards/seeed_xiao_nrf52840_kit.json

@@ -1,56 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x2886", "0x0166"]
-    ],
-    "usb_product": "XIAO-BOOT",
-    "mcu": "nrf52840",
-    "variant": "seeed_xiao_nrf52840_kit",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "seeed_xiao_nrf52840_kit",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html",
-  "vendor": "seeed"
-}

boards/t-watch-s3.json

@@ -16,7 +16,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]
@@ -24,7 +23,7 @@
     "mcu": "esp32s3",
     "variant": "t-watch-s3"
   },
-  "connectivity": ["wifi", "bluetooth"],
+  "connectivity": ["wifi"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/wiscore_rak11300.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-DARDUINO_GENERIC_RP2040 -DRASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      ["0x2E8A", "0x00C0"],
+      ["0x2E8A", "0x000A"]
+    ],
+    "mcu": "rp2040",
+    "variant": "WisBlock_RAK11300_Board"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "WisBlock RAK11300",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": ["cmsis-dap", "raspberrypi-swd", "picotool", "picoprobe"]
+  },
+  "url": "https://docs.rakwireless.com/",
+  "vendor": "RAKwireless"
+}

debian/ci_pack_sdeb.sh

@@ -10,9 +10,8 @@ platformio pkg install -e native -t platformio/tool-scons@4.40502.0
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
-# Download the meshtastic/web release build.tar to `web.tar`
-web_ver=$(cat bin/web.version)
-curl -L "https://github.com/meshtastic/web/releases/download/v$web_ver/build.tar" -o web.tar
+# Download the latest meshtastic/web release build.tar to `web.tar`
+curl -L https://github.com/meshtastic/web/releases/latest/download/build.tar -o web.tar
 
 package=$(dpkg-parsechangelog --show-field Source)
 

debian/control

@@ -17,7 +17,6 @@ Build-Depends: debhelper-compat (= 13),
                libbluetooth-dev,
                libusb-1.0-0-dev,
                libi2c-dev,
-               libuv1-dev,
                openssl,
                libssl-dev,
                libulfius-dev,

extra_scripts/extra_stm32.py

@@ -1,22 +0,0 @@
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-
-Import("env")
-# Custom HEX from ELF
-env.AddPostAction(
-    "$BUILD_DIR/${PROGNAME}.elf",
-    env.VerboseAction(
-        " ".join(
-            [
-                "$OBJCOPY",
-                "-O",
-                "ihex",
-                "-R",
-                ".eeprom",
-                "$BUILD_DIR/${PROGNAME}.elf",
-                "$BUILD_DIR/${PROGNAME}.hex",
-            ]
-        ),
-        "Building $BUILD_DIR/${PROGNAME}.hex",
-    ),
-)

meshtasticd.spec.rpkg

@@ -21,7 +21,7 @@ Summary:        Meshtastic daemon for communicating with Meshtastic devices
 License:        GPL-3.0
 URL:            https://github.com/meshtastic/firmware
 Source0:        {{{ git_dir_pack }}}
-Source1:        https://github.com/meshtastic/web/releases/download/v{{{ web_version }}}/build.tar
+Source1:        https://github.com/meshtastic/web/releases/latest/download/build.tar
 
 BuildRequires: systemd-rpm-macros
 BuildRequires: python3-devel
@@ -36,7 +36,6 @@ BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)
 BuildRequires: pkgconfig(libusb-1.0)
 BuildRequires: libi2c-devel
-BuildRequires: pkgconfig(libuv)
 # Web components:
 BuildRequires: pkgconfig(openssl)
 BuildRequires: pkgconfig(liborcania)

platformio.ini

@@ -7,8 +7,6 @@ default_envs = tbeam
 extra_configs =
 	arch/*/*.ini
 	variants/*/platformio.ini
-	src/graphics/niche/InkHUD/PlatformioConfig.ini
-
 description = Meshtastic
 
 [env]
@@ -56,11 +54,11 @@ build_flags = -Wno-missing-field-initializers
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95
 	mathertel/OneButton@2.6.1
-	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
-	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
-	https://github.com/meshtastic/ArduinoThread/archive/7c3ee9e1951551b949763b1f5280f8db1fa4068d.zip
+	https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
+	https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
+	https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
 	nanopb/Nanopb@0.4.91
 	erriez/ErriezCRC32@1.0.1
 
@@ -79,7 +77,7 @@ lib_deps =
 	${env.lib_deps}
 	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
-build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
+build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
@@ -92,21 +90,16 @@ lib_deps =
 lib_deps =
 	jgromes/RadioLib@7.1.2
 
-[device-ui_base]
-lib_deps =
-	https://github.com/meshtastic/device-ui/archive/56ef8db7eb4dda44dc0c1ec5828044debbbc6d33.zip
-
 ; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-	adafruit/Adafruit BusIO@1.17.0
-	adafruit/Adafruit Unified Sensor@1.1.15
+	adafruit/Adafruit BusIO@1.16.2
+	adafruit/Adafruit Unified Sensor@1.1.14
 	adafruit/Adafruit BMP280 Library@2.6.8
 	adafruit/Adafruit BMP085 Library@1.2.4
 	adafruit/Adafruit BME280 Library@2.2.4
-	adafruit/Adafruit BMP3XX Library@2.1.6
-	adafruit/Adafruit DPS310@1.1.5
+	adafruit/Adafruit BMP3XX Library@2.1.5
 	adafruit/Adafruit MCP9808 Library@2.0.2
 	adafruit/Adafruit INA260 Library@1.5.2
 	adafruit/Adafruit INA219@1.2.3
@@ -114,27 +107,27 @@ lib_deps =
 	adafruit/Adafruit SHTC3 Library@1.0.1
 	adafruit/Adafruit LPS2X@2.0.6
 	adafruit/Adafruit SHT31 Library@2.2.2
-	adafruit/Adafruit PM25 AQI Sensor@1.2.0
+	adafruit/Adafruit PM25 AQI Sensor@1.1.1
 	adafruit/Adafruit MPU6050@2.2.6
 	adafruit/Adafruit LIS3DH@1.3.0
 	adafruit/Adafruit AHTX0@2.0.5
-	adafruit/Adafruit LSM6DS@4.7.4
+	adafruit/Adafruit LSM6DS@4.7.3
 	adafruit/Adafruit VEML7700 Library@2.1.6
 	adafruit/Adafruit SHT4x Library@1.0.5
 	adafruit/Adafruit TSL2591 Library@1.4.5
 	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
-	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.3.0
+	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.2.13
 	ClosedCube OPT3001@1.1.2
 	emotibit/EmotiBit MLX90632@1.0.8
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	https://github.com/boschsensortec/Bosch-BSEC2-Library/archive/v1.7.2502.zip
+	https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
 	boschsensortec/BME68x Sensor Library@1.1.40407
-	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
+	https://github.com/KodinLanewave/INA3221@1.0.1
 	mprograms/QMC5883LCompass@1.2.3
 	dfrobot/DFRobot_RTU@1.0.3
-	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
-	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
-	robtillaart/INA226@0.6.4
+	https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d
+	https://github.com/DFRobot/DFRobot_RainfallSensor#38fea5e02b40a5430be6dab39a99a6f6347d667e
+	robtillaart/INA226@0.6.0
 
 	; Health Sensor Libraries
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2

src/AmbientLightingThread.h

@@ -6,11 +6,6 @@
 NCP5623 rgb;
 #endif
 
-#ifdef HAS_LP5562
-#include <graphics/NomadStarLED.h>
-LP5562 rgbw;
-#endif
-
 #ifdef HAS_NEOPIXEL
 #include <graphics/NeoPixel.h>
 Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
@@ -31,7 +26,7 @@ class AmbientLightingThread : public concurrency::OSThread
         notifyDeepSleepObserver.observe(&notifyDeepSleep); // Let us know when shutdown() is issued.
 
 // Enables Ambient Lighting by default if conditions are meet.
-#ifdef HAS_RGB_LED
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
 #ifdef ENABLE_AMBIENTLIGHTING
         moduleConfig.ambient_lighting.led_state = true;
 #endif
@@ -44,7 +39,7 @@ class AmbientLightingThread : public concurrency::OSThread
         // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
         // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
 
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
             LOG_DEBUG("AmbientLighting Disable due to no RGB leds found on I2C bus");
@@ -52,21 +47,17 @@ class AmbientLightingThread : public concurrency::OSThread
             return;
         }
 #endif
-#ifdef HAS_RGB_LED
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
         if (!moduleConfig.ambient_lighting.led_state) {
             LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
             disable();
             return;
         }
         LOG_DEBUG("AmbientLighting init");
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
 #endif
-#ifdef HAS_LP5562
-        } else if (_type == ScanI2C::LP5562) {
-            rgbw.begin();
-#endif
 #ifdef RGBLED_RED
             pinMode(RGBLED_RED, OUTPUT);
             pinMode(RGBLED_GREEN, OUTPUT);
@@ -79,7 +70,7 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
             setLighting();
 #endif
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         }
 #endif
     }
@@ -87,13 +78,13 @@ class AmbientLightingThread : public concurrency::OSThread
   protected:
     int32_t runOnce() override
     {
-#ifdef HAS_RGB_LED
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
-        if ((_type == ScanI2C::NCP5623 || _type == ScanI2C::LP5562) && moduleConfig.ambient_lighting.led_state) {
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef HAS_NCP5623
+        if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
 #endif
             setLighting();
             return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
-#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+#ifdef HAS_NCP5623
         }
 #endif
 #endif
@@ -117,14 +108,6 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setBlue(0);
         LOG_INFO("OFF: NCP5623 Ambient lighting");
 #endif
-#ifdef HAS_LP5562
-        rgbw.setCurrent(0);
-        rgbw.setRed(0);
-        rgbw.setGreen(0);
-        rgbw.setBlue(0);
-        rgbw.setWhite(0);
-        LOG_INFO("OFF: LP5562 Ambient lighting");
-#endif
 #ifdef HAS_NEOPIXEL
         pixels.clear();
         pixels.show();
@@ -158,14 +141,6 @@ class AmbientLightingThread : public concurrency::OSThread
         LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
                   moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
-#ifdef HAS_LP5562
-        rgbw.setCurrent(moduleConfig.ambient_lighting.current);
-        rgbw.setRed(moduleConfig.ambient_lighting.red);
-        rgbw.setGreen(moduleConfig.ambient_lighting.green);
-        rgbw.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init LP5562 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
-#endif
 #ifdef HAS_NEOPIXEL
         pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                                  moduleConfig.ambient_lighting.blue),

src/AudioThread.h

@@ -41,8 +41,10 @@ class AudioThread : public concurrency::OSThread
             delete i2sRtttl;
             i2sRtttl = nullptr;
         }
-        delete rtttlFile;
-        rtttlFile = nullptr;
+        if (rtttlFile != nullptr) {
+            delete rtttlFile;
+            rtttlFile = nullptr;
+        }
 
         setCPUFast(false);
     }

src/BluetoothStatus.h

@@ -30,7 +30,7 @@ class BluetoothStatus : public Status
     BluetoothStatus() { statusType = STATUS_TYPE_BLUETOOTH; }
 
     // New BluetoothStatus: connected or disconnected
-    explicit BluetoothStatus(ConnectionState state)
+    BluetoothStatus(ConnectionState state)
     {
         assert(state != ConnectionState::PAIRING); // If pairing, use constructor which specifies passkey
         statusType = STATUS_TYPE_BLUETOOTH;
@@ -38,7 +38,7 @@ class BluetoothStatus : public Status
     }
 
     // New BluetoothStatus: pairing, with passkey
-    explicit BluetoothStatus(const std::string &passkey) : Status()
+    BluetoothStatus(std::string passkey) : Status()
     {
         statusType = STATUS_TYPE_BLUETOOTH;
         this->state = ConnectionState::PAIRING;

src/ButtonThread.cpp

@@ -47,7 +47,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #ifdef USERPREFS_BUTTON_PIN
     int pin = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN; // Resolved button pin
 #endif
-#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
+#if defined(HELTEC_CAPSULE_SENSOR_V3)
     this->userButton = OneButton(pin, false, false);
 #elif defined(BUTTON_ACTIVE_LOW)
     this->userButton = OneButton(pin, BUTTON_ACTIVE_LOW, BUTTON_ACTIVE_PULLUP);
@@ -73,28 +73,23 @@ ButtonThread::ButtonThread() : OSThread("Button")
     userButton.setDebounceMs(1);
     userButton.attachDoubleClick(userButtonDoublePressed);
     userButton.attachMultiClick(userButtonMultiPressed, this); // Reference to instance: get click count from non-static OneButton
-#if !defined(T_DECK) &&                                                                                                          \
-    !defined(                                                                                                                    \
-        ELECROW_ThinkNode_M2) // T-Deck immediately wakes up after shutdown, Thinknode M2 has this on the smaller ALT button
+#ifndef T_DECK // T-Deck immediately wakes up after shutdown, so disable this function
     userButton.attachLongPressStart(userButtonPressedLongStart);
     userButton.attachLongPressStop(userButtonPressedLongStop);
 #endif
 #endif
 
 #ifdef BUTTON_PIN_ALT
-#if defined(ELECROW_ThinkNode_M2)
-    this->userButtonAlt = OneButton(BUTTON_PIN_ALT, false, false);
-#else
-    this->userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
-#endif
+    userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
 #ifdef INPUT_PULLUP_SENSE
     // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
     pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
 #endif
-    userButtonAlt.attachClick(userButtonPressedScreen);
+    userButtonAlt.attachClick(userButtonPressed);
     userButtonAlt.setClickMs(BUTTON_CLICK_MS);
     userButtonAlt.setPressMs(BUTTON_LONGPRESS_MS);
     userButtonAlt.setDebounceMs(1);
+    userButtonAlt.attachDoubleClick(userButtonDoublePressed);
     userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
     userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
 #endif
@@ -116,49 +111,6 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #endif
 }
 
-void ButtonThread::switchPage()
-{
-#ifdef BUTTON_PIN
-#if !defined(USERPREFS_BUTTON_PIN)
-    if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
-         moduleConfig.canned_message.inputbroker_pin_press) ||
-        !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
-        !moduleConfig.canned_message.enabled) {
-        powerFSM.trigger(EVENT_PRESS);
-    }
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-    if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
-         moduleConfig.canned_message.inputbroker_pin_press) ||
-        !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
-        !moduleConfig.canned_message.enabled) {
-        powerFSM.trigger(EVENT_PRESS);
-    }
-#endif
-
-#endif
-#if defined(ARCH_PORTDUINO)
-    if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
-            (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
-        !moduleConfig.canned_message.enabled) {
-        powerFSM.trigger(EVENT_PRESS);
-    }
-#endif
-}
-
-void ButtonThread::sendAdHocPosition()
-{
-    service->refreshLocalMeshNode();
-    auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
-    if (screen) {
-        if (sentPosition)
-            screen->print("Sent ad-hoc position\n");
-        else
-            screen->print("Sent ad-hoc nodeinfo\n");
-        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
-    }
-}
-
 int32_t ButtonThread::runOnce()
 {
     // If the button is pressed we suppress CPU sleep until release
@@ -189,48 +141,49 @@ int32_t ButtonThread::runOnce()
             // If a nag notification is running, stop it and prevent other actions
             if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
                 externalNotificationModule->stopNow();
-                break;
+                return 50;
             }
-#ifdef ELECROW_ThinkNode_M1
-            sendAdHocPosition();
-            break;
+#ifdef BUTTON_PIN
+#if !defined(USERPREFS_BUTTON_PIN)
+            if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
 #endif
-            switchPage();
-            break;
-        }
-
-        case BUTTON_EVENT_PRESSED_SCREEN: {
-            LOG_BUTTON("AltPress!");
-#ifdef ELECROW_ThinkNode_M1
-            // If a nag notification is running, stop it and prevent other actions
-            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
-                externalNotificationModule->stopNow();
-                break;
+#if defined(USERPREFS_BUTTON_PIN)
+            if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
+#endif
+                 moduleConfig.canned_message.inputbroker_pin_press) ||
+                !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
+            }
+#endif
+#if defined(ARCH_PORTDUINO)
+            if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
+                    (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
             }
-            switchPage();
-            break;
 #endif
-            // turn screen on or off
-            screen_flag = !screen_flag;
-            if (screen)
-                screen->setOn(screen_flag);
             break;
         }
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
             LOG_BUTTON("Double press!");
-#ifdef ELECROW_ThinkNode_M1
-            digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-            break;
-#endif
-            sendAdHocPosition();
+            service->refreshLocalMeshNode();
+            auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
+            if (screen) {
+                if (sentPosition)
+                    screen->print("Sent ad-hoc position\n");
+                else
+                    screen->print("Sent ad-hoc nodeinfo\n");
+                screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+            }
             break;
         }
 
         case BUTTON_EVENT_MULTI_PRESSED: {
             LOG_BUTTON("Mulitipress! %hux", multipressClickCount);
             switch (multipressClickCount) {
-#if HAS_GPS && !defined(ELECROW_ThinkNode_M1)
+#if HAS_GPS
             // 3 clicks: toggle GPS
             case 3:
                 if (!config.device.disable_triple_click && (gps != nullptr)) {
@@ -239,17 +192,8 @@ int32_t ButtonThread::runOnce()
                         screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
                 }
                 break;
-#elif defined(ELECROW_ThinkNode_M1) || defined(ELECROW_ThinkNode_M2)
-            case 3:
-                LOG_INFO("3 clicks: toggle buzzer");
-                buzzer_flag = !buzzer_flag;
-                if (!buzzer_flag)
-                    noTone(PIN_BUZZER);
-                break;
-
 #endif
-
-#if defined(USE_EINK) && defined(PIN_EINK_EN) && !defined(ELECROW_ThinkNode_M1) // i.e. T-Echo
+#if defined(USE_EINK) && defined(PIN_EINK_EN) // i.e. T-Echo
             // 4 clicks: toggle backlight
             case 4:
                 digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
@@ -349,12 +293,8 @@ void ButtonThread::attachButtonInterrupts()
 #endif
 
 #ifdef BUTTON_PIN_ALT
-#ifdef ELECROW_ThinkNode_M2
-    wakeOnIrq(BUTTON_PIN_ALT, RISING);
-#else
     wakeOnIrq(BUTTON_PIN_ALT, FALLING);
 #endif
-#endif
 
 #ifdef BUTTON_PIN_TOUCH
     wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);

src/ButtonThread.h

@@ -24,7 +24,6 @@ class ButtonThread : public concurrency::OSThread
     enum ButtonEventType {
         BUTTON_EVENT_NONE,
         BUTTON_EVENT_PRESSED,
-        BUTTON_EVENT_PRESSED_SCREEN,
         BUTTON_EVENT_DOUBLE_PRESSED,
         BUTTON_EVENT_MULTI_PRESSED,
         BUTTON_EVENT_LONG_PRESSED,
@@ -37,15 +36,13 @@ class ButtonThread : public concurrency::OSThread
     void attachButtonInterrupts();
     void detachButtonInterrupts();
     void storeClickCount();
-    bool isBuzzing() { return buzzer_flag; }
-    void setScreenFlag(bool flag) { screen_flag = flag; }
-    bool getScreenFlag() { return screen_flag; }
 
     // Disconnect and reconnect interrupts for light sleep
 #ifdef ARCH_ESP32
     int beforeLightSleep(void *unused);
     int afterLightSleep(esp_sleep_wakeup_cause_t cause);
 #endif
+
   private:
 #if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
     static OneButton userButton; // Static - accessed from an interrupt
@@ -67,20 +64,14 @@ class ButtonThread : public concurrency::OSThread
 
     // set during IRQ
     static volatile ButtonEventType btnEvent;
-    bool buzzer_flag = false;
-    bool screen_flag = true;
 
     // Store click count during callback, for later use
     volatile int multipressClickCount = 0;
 
     static void wakeOnIrq(int irq, int mode);
 
-    static void sendAdHocPosition();
-    static void switchPage();
-
     // IRQ callbacks
     static void userButtonPressed() { btnEvent = BUTTON_EVENT_PRESSED; }
-    static void userButtonPressedScreen() { btnEvent = BUTTON_EVENT_PRESSED_SCREEN; }
     static void userButtonDoublePressed() { btnEvent = BUTTON_EVENT_DOUBLE_PRESSED; }
     static void userButtonMultiPressed(void *callerThread); // Retrieve click count from non-static Onebutton while still valid
     static void userButtonPressedLongStart();

src/DebugConfiguration.h

@@ -121,15 +121,10 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
-#endif // HAS_ETHERNET
-
 #if HAS_WIFI
 #include <WiFi.h>
 #endif // HAS_WIFI
@@ -169,4 +164,4 @@ class Syslog
     bool vlogf(uint16_t pri, const char *appName, const char *fmt, va_list args) __attribute__((format(printf, 3, 0)));
 };
 
-#endif // HAS_NETWORKING
+#endif // HAS_ETHERNET || HAS_WIFI

src/DisplayFormatters.cpp

@@ -27,6 +27,9 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
+        return useShortName ? "VeryL" : "VLongSlow";
+        break;
     default:
         return useShortName ? "Custom" : "Invalid";
         break;

src/FSCommon.cpp

@@ -29,6 +29,30 @@ SPIClass SPI1(HSPI);
 
 #endif // HAS_SDCARD
 
+#if defined(ARCH_STM32WL)
+
+uint16_t OSFS::startOfEEPROM = 1;
+uint16_t OSFS::endOfEEPROM = 2048;
+
+// 3) How do I read from the medium?
+void OSFS::readNBytes(uint16_t address, unsigned int num, byte *output)
+{
+    for (uint16_t i = address; i < address + num; i++) {
+        *output = EEPROM.read(i);
+        output++;
+    }
+}
+
+// 4) How to I write to the medium?
+void OSFS::writeNBytes(uint16_t address, unsigned int num, const byte *input)
+{
+    for (uint16_t i = address; i < address + num; i++) {
+        EEPROM.update(i, *input);
+        input++;
+    }
+}
+#endif
+
 /**
  * @brief Copies a file from one location to another.
  *
@@ -38,7 +62,33 @@ SPIClass SPI1(HSPI);
  */
 bool copyFile(const char *from, const char *to)
 {
-#ifdef FSCom
+#ifdef ARCH_STM32WL
+    unsigned char cbuffer[2048];
+
+    // Var to hold the result of actions
+    OSFS::result r;
+
+    r = OSFS::getFile(from, cbuffer);
+
+    if (r == notfound) {
+        LOG_ERROR("Failed to open source file %s", from);
+        return false;
+    } else if (r == noerr) {
+        r = OSFS::newFile(to, cbuffer, true);
+        if (r == noerr) {
+            return true;
+        } else {
+            LOG_ERROR("OSFS Error %d", r);
+            return false;
+        }
+
+    } else {
+        LOG_ERROR("OSFS Error %d", r);
+        return false;
+    }
+    return true;
+
+#elif defined(FSCom)
     // take SPI Lock
     concurrency::LockGuard g(spiLock);
     unsigned char cbuffer[16];
@@ -77,7 +127,13 @@ bool copyFile(const char *from, const char *to)
  */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
-#ifdef FSCom
+#ifdef ARCH_STM32WL
+    if (copyFile(pathFrom, pathTo) && (OSFS::deleteFile(pathFrom) == OSFS::result::NO_ERROR)) {
+        return true;
+    } else {
+        return false;
+    }
+#elif defined(FSCom)
 
 #ifdef ARCH_ESP32
     // take SPI Lock

src/FSCommon.h

@@ -15,11 +15,13 @@
 #endif
 
 #if defined(ARCH_STM32WL)
-// STM32WL
-#include "LittleFS.h"
-#define FSCom InternalFS
-#define FSBegin() FSCom.begin()
-using namespace STM32_LittleFS_Namespace;
+// STM32WL series 2 Kbytes (8 rows of 256 bytes)
+#include <EEPROM.h>
+#include <OSFS.h>
+
+// Useful consts
+const OSFS::result noerr = OSFS::result::NO_ERROR;
+const OSFS::result notfound = OSFS::result::FILE_NOT_FOUND;
 #endif
 
 #if defined(ARCH_RP2040)

src/Power.cpp

@@ -32,11 +32,6 @@
 #include <WiFi.h>
 #endif
 
-#if HAS_ETHERNET && defined(USE_WS5500)
-#include <ETHClass2.h>
-#define ETH ETH2
-#endif // HAS_ETHERNET
-
 #endif
 
 #ifndef DELAY_FOREVER
@@ -380,20 +375,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
     // if we have a integrated device with a battery, we can assume that the battery is always connected
 #ifdef BATTERY_IMMUTABLE
     virtual bool isBatteryConnect() override { return true; }
-#elif defined(ADC_V)
-    virtual bool isBatteryConnect() override
-    {
-        int lastReading = digitalRead(ADC_V);
-        // 判断值是否变化
-        for (int i = 2; i < 500; i++) {
-            int reading = digitalRead(ADC_V);
-            if (reading != lastReading) {
-                return false; // 有变化，USB供电, 没接电池
-            }
-        }
-
-        return true;
-    }
 #else
     virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 #endif
@@ -405,7 +386,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual bool isVbusIn() override
     {
 #ifdef EXT_PWR_DETECT
-#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
+#ifdef HELTEC_CAPSULE_SENSOR_V3
         // if external powered that pin will be pulled down
         if (digitalRead(EXT_PWR_DETECT) == LOW) {
             return true;
@@ -555,7 +536,7 @@ Power::Power() : OSThread("Power")
 bool Power::analogInit()
 {
 #ifdef EXT_PWR_DETECT
-#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
+#ifdef HELTEC_CAPSULE_SENSOR_V3
     pinMode(EXT_PWR_DETECT, INPUT_PULLUP);
 #else
     pinMode(EXT_PWR_DETECT, INPUT);
@@ -682,12 +663,12 @@ void Power::readPowerStatus()
     int8_t batteryChargePercent = -1;
     OptionalBool usbPowered = OptUnknown;
     OptionalBool hasBattery = OptUnknown; // These must be static because NRF_APM code doesn't run every time
-    OptionalBool isChargingNow = OptUnknown;
+    OptionalBool isCharging = OptUnknown;
 
     if (batteryLevel) {
         hasBattery = batteryLevel->isBatteryConnect() ? OptTrue : OptFalse;
         usbPowered = batteryLevel->isVbusIn() ? OptTrue : OptFalse;
-        isChargingNow = batteryLevel->isCharging() ? OptTrue : OptFalse;
+        isCharging = batteryLevel->isCharging() ? OptTrue : OptFalse;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
             // If the AXP192 returns a valid battery percentage, use it
@@ -716,15 +697,15 @@ void Power::readPowerStatus()
 
     // If changed to DISCONNECTED
     if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED)
-        isChargingNow = usbPowered = OptFalse;
+        isCharging = usbPowered = OptFalse;
     // If changed to CONNECTED / READY
     else
-        isChargingNow = usbPowered = OptTrue;
+        isCharging = usbPowered = OptTrue;
 
 #endif
 
     // Notify any status instances that are observing us
-    const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
+    const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isCharging, batteryVoltageMv, batteryChargePercent);
     LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
               powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
     newStatus.notifyObservers(&powerStatus2);
@@ -770,7 +751,6 @@ void Power::readPowerStatus()
     // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
     // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
     //
-
     if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
         if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
             low_voltage_counter++;

src/SafeFile.cpp

@@ -7,6 +7,7 @@ static File openFile(const char *filename, bool fullAtomic)
 {
     concurrency::LockGuard g(spiLock);
     LOG_DEBUG("Opening %s, fullAtomic=%d", filename, fullAtomic);
+
 #ifdef ARCH_NRF52
     FSCom.remove(filename);
     return FSCom.open(filename, FILE_O_WRITE);
@@ -18,10 +19,10 @@ static File openFile(const char *filename, bool fullAtomic)
     String filenameTmp = filename;
     filenameTmp += ".tmp";
 
-    // FIXME: If we are doing a full atomic write, we may need to remove the old tmp file now
-    // if (fullAtomic) {
-    //     FSCom.remove(filename);
-    // }
+    // If we are doing a full atomic write, remove the old tmp file now
+    if (fullAtomic) {
+        FSCom.remove(filename);
+    }
 
     // clear any previous LFS errors
     return FSCom.open(filenameTmp.c_str(), FILE_O_WRITE);

src/buzz/buzz.cpp

@@ -30,11 +30,8 @@ struct ToneDuration {
 #define NOTE_B3 247
 #define NOTE_CS4 277
 
-const int DURATION_1_8 = 125;  // 1/8 note
-const int DURATION_1_4 = 250;  // 1/4 note
-const int DURATION_1_2 = 500;  // 1/2 note
-const int DURATION_3_4 = 750;  // 1/4 note
-const int DURATION_1_1 = 1000; // 1/1 note
+const int DURATION_1_8 = 125; // 1/8 note
+const int DURATION_1_4 = 250; // 1/4 note
 
 void playTones(const ToneDuration *tone_durations, int size)
 {
@@ -58,12 +55,6 @@ void playBeep()
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
-void playLongBeep()
-{
-    ToneDuration melody[] = {{NOTE_B3, DURATION_1_1}};
-    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
-}
-
 void playGPSEnableBeep()
 {
     ToneDuration melody[] = {{NOTE_C3, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_CS4, DURATION_1_4}};

src/buzz/buzz.h

@@ -1,7 +1,6 @@
 #pragma once
 
 void playBeep();
-void playLongBeep();
 void playStartMelody();
 void playShutdownMelody();
 void playGPSEnableBeep();

src/configuration.h

@@ -135,7 +135,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
 #define SHT31_4x_ADDR 0x44
-#define SHT31_4x_ADDR_ALT 0x45
 #define PMSA0031_ADDR 0x12
 #define QMA6100P_ADDR 0x12
 #define AHT10_ADDR 0x38
@@ -151,8 +150,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MAX30102_ADDR 0x57
 #define MLX90614_ADDR_DEF 0x5A
 #define CGRADSENS_ADDR 0x66
-#define LTR390UV_ADDR 0x53
-#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
@@ -171,7 +168,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // LED
 // -----------------------------------------------------------------------------
 #define NCP5623_ADDR 0x38
-#define LP5562_ADDR 0x30
 
 // -----------------------------------------------------------------------------
 // Security
@@ -297,11 +293,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #error HW_VENDOR must be defined
 #endif
 
-// Support multiple RGB LED configuration
-#if defined(HAS_NCP5623) || defined(HAS_LP5562) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
-#define HAS_RGB_LED
-#endif
-
 // -----------------------------------------------------------------------------
 // Global switches to turn off features for a minimized build
 // -----------------------------------------------------------------------------

src/detect/ScanI2C.cpp

@@ -31,8 +31,8 @@ ScanI2C::FoundDevice ScanI2C::firstRTC() const
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 {
-    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004, MPR121KB, TCA8418KB};
-    return firstOfOrNONE(6, types);
+    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004, MPR121KB};
+    return firstOfOrNONE(5, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
@@ -41,12 +41,6 @@ ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
     return firstOfOrNONE(8, types);
 }
 
-ScanI2C::FoundDevice ScanI2C::firstRGBLED() const
-{
-    ScanI2C::DeviceType types[] = {NCP5623, LP5562};
-    return firstOfOrNONE(2, types);
-}
-
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const
 {
     return DEVICE_NONE;

src/detect/ScanI2C.h

@@ -18,7 +18,7 @@ class ScanI2C
         TDECKKB,
         BBQ10KB,
         RAK14004,
-        PMU_AXP192_AXP2101, // has the same adress as the TCA8418KB
+        PMU_AXP192_AXP2101,
         BME_680,
         BME_280,
         BMP_280,
@@ -49,7 +49,6 @@ class ScanI2C
         VEML7700,
         RCWL9620,
         NCP5623,
-        LP5562,
         TSL2591,
         OPT3001,
         MLX90632,
@@ -68,9 +67,6 @@ class ScanI2C
         INA226,
         NXP_SE050,
         DFROBOT_RAIN,
-        DPS310,
-        LTR390UV,
-        TCA8418KB,
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;
@@ -123,8 +119,6 @@ class ScanI2C
 
     FoundDevice firstAccelerometer() const;
 
-    FoundDevice firstRGBLED() const;
-
     virtual FoundDevice find(DeviceType) const;
 
     virtual bool exists(DeviceType) const;

src/detect/ScanI2CTwoWire.cpp

@@ -10,6 +10,11 @@
 #include "meshUtils.h" // vformat
 #endif
 
+// AXP192 and AXP2101 have the same device address, we just need to identify it in Power.cpp
+#ifndef XPOWERS_AXP192_AXP2101_ADDRESS
+#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34
+#endif
+
 bool in_array(uint8_t *array, int size, uint8_t lookfor)
 {
     int i;
@@ -213,20 +218,9 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #ifdef HAS_NCP5623
                 SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623", (uint8_t)addr.address);
 #endif
-#ifdef HAS_LP5562
-                SCAN_SIMPLE_CASE(LP5562_ADDR, LP5562, "LP5562", (uint8_t)addr.address);
+#ifdef HAS_PMU
+                SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "AXP192/AXP2101", (uint8_t)addr.address)
 #endif
-            case XPOWERS_AXP192_AXP2101_ADDRESS:
-                // Do we have the axp2101/192 or the TCA8418
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x90), 1);
-                if (registerValue == 0x0) {
-                    logFoundDevice("TCA8418", (uint8_t)addr.address);
-                    type = TCA8418KB;
-                } else {
-                    logFoundDevice("AXP192/AXP2101", (uint8_t)addr.address);
-                    type = PMU_AXP192_AXP2101;
-                }
-                break;
             case BME_ADDR:
             case BME_ADDR_ALTERNATE:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xD0), 1); // GET_ID
@@ -243,16 +237,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BMP085/BMP180", (uint8_t)addr.address);
                     type = BMP_085;
                     break;
-                case 0x00:
-                    // do we have a DPS310 instead?
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0D), 1);
-                    switch (registerValue) {
-                    case 0x10:
-                        logFoundDevice("DPS310", (uint8_t)addr.address);
-                        type = DPS310;
-                        break;
-                    }
-                    break;
                 default:
                     registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // GET_ID
                     switch (registerValue) {
@@ -355,8 +339,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     }
                     break;
                 }
-            case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
-            case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
+            case SHT31_4x_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
                 if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c) {
                     type = SHT4X;
@@ -429,11 +412,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
 #ifdef HAS_TPS65233
                 SCAN_SIMPLE_CASE(TPS65233_ADDR, TPS65233, "TPS65233", (uint8_t)addr.address);
 #endif

src/gps/GPS.cpp

@@ -1,7 +1,3 @@
-#include <cstring> // Include for strstr
-#include <string>
-#include <vector>
-
 #include "configuration.h"
 #if !MESHTASTIC_EXCLUDE_GPS
 #include "Default.h"
@@ -12,7 +8,6 @@
 #include "RTC.h"
 #include "Throttle.h"
 #include "buzz.h"
-#include "concurrency/Periodic.h"
 #include "meshUtils.h"
 
 #include "main.h" // pmu_found
@@ -90,45 +85,6 @@ static const char *getGPSPowerStateString(GPSPowerState state)
     }
 }
 
-#ifdef PIN_GPS_SWITCH
-// If we have a hardware switch, define a periodic watcher outside of the GPS runOnce thread, since this can be sleeping
-// idefinitely
-
-int lastState = LOW;
-bool firstrun = true;
-
-static int32_t gpsSwitch()
-{
-    if (gps) {
-        int currentState = digitalRead(PIN_GPS_SWITCH);
-
-        // if the switch is set to zero, disable the GPS Thread
-        if (firstrun)
-            if (currentState == LOW)
-                lastState = HIGH;
-
-        if (currentState != lastState) {
-            if (currentState == LOW) {
-                config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_DISABLED;
-                if (!firstrun)
-                    playGPSDisableBeep();
-                gps->disable();
-            } else {
-                config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_ENABLED;
-                if (!firstrun)
-                    playGPSEnableBeep();
-                gps->enable();
-            }
-            lastState = currentState;
-        }
-        firstrun = false;
-    }
-    return 1000;
-}
-
-static concurrency::Periodic *gpsPeriodic;
-#endif
-
 static void UBXChecksum(uint8_t *message, size_t length)
 {
     uint8_t CK_A = 0, CK_B = 0;
@@ -1021,16 +977,15 @@ void GPS::down()
         setPowerState(GPS_IDLE);
 
     else {
-// Check whether the GPS hardware is capable of GPS_SOFTSLEEP
-// If not, fallback to GPS_HARDSLEEP instead
-#ifdef PIN_GPS_STANDBY // L76B, L76K and clones have a standby pin
-        bool softsleepSupported = true;
-#else
+        // Check whether the GPS hardware is capable of GPS_SOFTSLEEP
+        // If not, fallback to GPS_HARDSLEEP instead
         bool softsleepSupported = false;
-#endif
         // U-blox is supported via PMREQ
         if (IS_ONE_OF(gnssModel, GNSS_MODEL_UBLOX6, GNSS_MODEL_UBLOX7, GNSS_MODEL_UBLOX8, GNSS_MODEL_UBLOX9, GNSS_MODEL_UBLOX10))
             softsleepSupported = true;
+#ifdef PIN_GPS_STANDBY // L76B, L76K and clones have a standby pin
+        softsleepSupported = true;
+#endif
 
         if (softsleepSupported) {
             // How long does gps_update_interval need to be, for GPS_HARDSLEEP to become more efficient than
@@ -1145,16 +1100,12 @@ int32_t GPS::runOnce()
     return (powerState == GPS_ACTIVE) ? GPS_THREAD_INTERVAL : 5000;
 }
 
-// clear the GPS rx/tx buffer as quickly as possible
+// clear the GPS rx buffer as quickly as possible
 void GPS::clearBuffer()
 {
-#ifdef ARCH_ESP32
-    _serial_gps->flush(false);
-#else
     int x = _serial_gps->available();
     while (x--)
         _serial_gps->read();
-#endif
 }
 
 /// Prepare the GPS for the cpu entering deep or light sleep, expect to be gone for at least 100s of msecs
@@ -1166,7 +1117,7 @@ int GPS::prepareDeepSleep(void *unused)
 }
 
 static const char *PROBE_MESSAGE = "Trying %s (%s)...";
-static const char *DETECTED_MESSAGE = "%s detected";
+static const char *DETECTED_MESSAGE = "%s detected, using %s Module";
 
 #define PROBE_SIMPLE(CHIP, TOWRITE, RESPONSE, DRIVER, TIMEOUT, ...)                                                              \
     do {                                                                                                                         \
@@ -1174,22 +1125,11 @@ static const char *DETECTED_MESSAGE = "%s detected";
         clearBuffer();                                                                                                           \
         _serial_gps->write(TOWRITE "\r\n");                                                                                      \
         if (getACK(RESPONSE, TIMEOUT) == GNSS_RESPONSE_OK) {                                                                     \
-            LOG_INFO(DETECTED_MESSAGE, CHIP);                                                                                    \
+            LOG_INFO(DETECTED_MESSAGE, CHIP, #DRIVER);                                                                           \
             return DRIVER;                                                                                                       \
         }                                                                                                                        \
     } while (0)
 
-#define PROBE_FAMILY(FAMILY_NAME, COMMAND, RESPONSE_MAP, TIMEOUT)                                                                \
-    do {                                                                                                                         \
-        LOG_DEBUG(PROBE_MESSAGE, COMMAND, FAMILY_NAME);                                                                          \
-        clearBuffer();                                                                                                           \
-        _serial_gps->write(COMMAND "\r\n");                                                                                      \
-        GnssModel_t detectedDriver = getProbeResponse(TIMEOUT, RESPONSE_MAP);                                                    \
-        if (detectedDriver != GNSS_MODEL_UNKNOWN) {                                                                              \
-            return detectedDriver;                                                                                               \
-        }                                                                                                                        \
-    } while (0)
-
 GnssModel_t GPS::probe(int serialSpeed)
 {
 #if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
@@ -1220,35 +1160,31 @@ GnssModel_t GPS::probe(int serialSpeed)
     delay(20);
 
     // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A
-    std::vector<ChipInfo> unicore = {{"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}};
-    PROBE_FAMILY("Unicore Family", "$PDTINFO", unicore, 500);
-
-    std::vector<ChipInfo> atgm = {
-        {"ATGM336H", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H},
-        /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS)) based on AT6558 */
-        {"ATGM332D", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H}};
-    PROBE_FAMILY("ATGM33xx Family", "$PCAS06,1*1A", atgm, 500);
+    PROBE_SIMPLE("UC6580", "$PDTINFO", "UC6580", GNSS_MODEL_UC6580, 500);
+    PROBE_SIMPLE("UM600", "$PDTINFO", "UM600", GNSS_MODEL_UC6580, 500);
+    PROBE_SIMPLE("ATGM336H", "$PCAS06,1*1A", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H, 500);
+    /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS))
+    based on AT6558 */
+    PROBE_SIMPLE("ATGM332D", "$PCAS06,1*1A", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H, 500);
 
     /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
     _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume
     _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume
     _serial_gps->write("$PAIR513*3D\r\n");     // save configuration
-    std::vector<ChipInfo> airoha = {{"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
-                                    {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
-                                    {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352}};
-    PROBE_FAMILY("Airoha Family", "$PAIR021*39", airoha, 1000);
-
+    PROBE_SIMPLE("AG3335", "$PAIR021*39", "$PAIR021,AG3335", GNSS_MODEL_AG3335, 500);
+    PROBE_SIMPLE("AG3352", "$PAIR021*39", "$PAIR021,AG3352", GNSS_MODEL_AG3352, 500);
     PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500);
+
     PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500);
 
-    // Close all NMEA sentences, valid for MTK3333 and MTK3339 platforms
+    // Close all NMEA sentences, valid for L76B MTK platform (Waveshare Pico GPS)
     _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
     delay(20);
-    std::vector<ChipInfo> mtk = {{"L76B", "Quectel-L76B", GNSS_MODEL_MTK_L76B},
-                                 {"PA1616S", "1616S", GNSS_MODEL_MTK_PA1616S},
-                                 {"LS20031", "MC-1513", GNSS_MODEL_MTK_L76B},
-                                 {"L96", "Quectel-L96", GNSS_MODEL_MTK_L76B}};
-    PROBE_FAMILY("MTK Family", "$PMTK605*31", mtk, 500);
+
+    PROBE_SIMPLE("L76B", "$PMTK605*31", "Quectel-L76B", GNSS_MODEL_MTK_L76B, 500);
+    PROBE_SIMPLE("PA1616S", "$PMTK605*31", "1616S", GNSS_MODEL_MTK_PA1616S, 500);
+
+    PROBE_SIMPLE("LS20031", "$PMTK605*31", "MC-1513", GNSS_MODEL_LS20031, 500);
 
     uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
     UBXChecksum(cfg_rate, sizeof(cfg_rate));
@@ -1345,38 +1281,6 @@ GnssModel_t GPS::probe(int serialSpeed)
     return GNSS_MODEL_UNKNOWN;
 }
 
-GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap)
-{
-    String response = "";
-    unsigned long start = millis();
-    while (millis() - start < timeout) {
-        if (_serial_gps->available()) {
-            response += (char)_serial_gps->read();
-
-            if (response.endsWith(",") || response.endsWith("\r\n")) {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(response.c_str());
-#endif
-                // check if we can see our chips
-                for (const auto &chipInfo : responseMap) {
-                    if (strstr(response.c_str(), chipInfo.detectionString.c_str()) != nullptr) {
-                        LOG_INFO("%s detected", chipInfo.chipName.c_str());
-                        return chipInfo.driver;
-                    }
-                }
-            }
-            if (response.endsWith("\r\n")) {
-                response.trim();
-                response = ""; // Reset the response string for the next potential message
-            }
-        }
-    }
-#ifdef GPS_DEBUG
-    LOG_DEBUG(response.c_str());
-#endif
-    return GNSS_MODEL_UNKNOWN; // Return empty string on timeout
-}
-
 GPS *GPS::createGps()
 {
     int8_t _rx_gpio = config.position.rx_gpio;
@@ -1430,12 +1334,6 @@ GPS *GPS::createGps()
     pinMode(PIN_GPS_PPS, INPUT);
 #endif
 
-#ifdef PIN_GPS_SWITCH
-    // toggle GPS via external GPIO switch
-    pinMode(PIN_GPS_SWITCH, INPUT);
-    gpsPeriodic = new concurrency::Periodic("GPSSwitch", gpsSwitch);
-#endif
-
 // Currently disabled per issue #525 (TinyGPS++ crash bug)
 // when fixed upstream, can be un-disabled to enable 3D FixType and PDOP
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS

src/gps/GPS.h

@@ -48,11 +48,6 @@ enum GPSPowerState : uint8_t {
     GPS_OFF        // Powered off indefinitely
 };
 
-struct ChipInfo {
-    String chipName;        // The name of the chip (for logging)
-    String detectionString; // The string to match in the response
-    GnssModel_t driver;     // The driver to use
-};
 /**
  * A gps class that only reads from the GPS periodically and keeps the gps powered down except when reading
  *
@@ -235,8 +230,6 @@ class GPS : private concurrency::OSThread
 
     virtual int32_t runOnce() override;
 
-    GnssModel_t getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap);
-
     // Get GNSS model
     GnssModel_t probe(int serialSpeed);
 

src/gps/ubx.h

@@ -224,7 +224,7 @@ static const uint8_t _message_GSA[] = {
     0x00,       // Rate for DDC
     0x00,       // Rate for UART1
     0x00,       // Rate for UART2
-    0x00,       // Rate for USB useful for native linux
+    0x00,       // Rate for USB usefull for native linux
     0x00,       // Rate for SPI
     0x00        // Reserved
 };
@@ -258,7 +258,7 @@ static const uint8_t _message_RMC[] = {
     0x00,       // Rate for DDC
     0x01,       // Rate for UART1
     0x00,       // Rate for UART2
-    0x01,       // Rate for USB useful for native linux
+    0x01,       // Rate for USB usefull for native linux
     0x00,       // Rate for SPI
     0x00        // Reserved
 };
@@ -269,7 +269,7 @@ static const uint8_t _message_GGA[] = {
     0x00,       // Rate for DDC
     0x01,       // Rate for UART1
     0x00,       // Rate for UART2
-    0x01,       // Rate for USB, useful for native linux
+    0x01,       // Rate for USB, usefull for native linux
     0x00,       // Rate for SPI
     0x00        // Reserved
 };

src/graphics/EInkDisplay2.cpp

@@ -128,25 +128,16 @@ bool EInkDisplay::connect()
 #ifdef PIN_EINK_EN
     // backlight power, HIGH is backlight on, LOW is off
     pinMode(PIN_EINK_EN, OUTPUT);
-#ifdef ELECROW_ThinkNode_M1
-    // ThinkNode M1 has a hardware dimmable backlight. Start enabled
-    digitalWrite(PIN_EINK_EN, HIGH);
-#else
     digitalWrite(PIN_EINK_EN, LOW);
 #endif
-#endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1)
+#if defined(TTGO_T_ECHO)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 
         adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
-#ifdef ELECROW_ThinkNode_M1
-        adafruitDisplay->setRotation(4);
-#else
         adafruitDisplay->setRotation(3);
-#endif
         adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     }
 #elif defined(MESHLINK)
@@ -175,8 +166,7 @@ bool EInkDisplay::connect()
     }
 
 #elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213) ||             \
-    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER)
     {
         // Start HSPI
         hspi = new SPIClass(HSPI);
@@ -192,9 +182,6 @@ bool EInkDisplay::connect()
         // Init GxEPD2
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
-#if defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER)
-        adafruitDisplay->setRotation(0);
-#endif
     }
 #elif defined(PCA10059) || defined(ME25LS01)
     {

src/graphics/EInkDisplay2.h

@@ -68,8 +68,7 @@ class EInkDisplay : public OLEDDisplay
 
     // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
-    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER)
     SPIClass *hspi = NULL;
 #endif
 
@@ -78,4 +77,4 @@ class EInkDisplay : public OLEDDisplay
     uint32_t lastDrawMsec = 0;
 };
 
-#endif
+#endif

src/graphics/EInkDynamicDisplay.cpp

@@ -324,14 +324,6 @@ void EInkDynamicDisplay::checkConsecutiveFastRefreshes()
     if (refresh != UNSPECIFIED)
         return;
 
-    // Bypass limit if UNLIMITED_FAST mode is active
-    if (frameFlags & UNLIMITED_FAST) {
-        refresh = FAST;
-        reason = NO_OBJECTIONS;
-        LOG_DEBUG("refresh=FAST, reason=UNLIMITED_FAST_MODE_ACTIVE, frameFlags=0x%x", frameFlags);
-        return;
-    }
-
     // If too many FAST refreshes consecutively - force a FULL refresh
     if (fastRefreshCount >= EINK_LIMIT_FASTREFRESH) {
         refresh = FULL;

src/graphics/EInkDynamicDisplay.h

@@ -23,10 +23,6 @@ class EInkDynamicDisplay : public EInkDisplay, protected concurrency::NotifiedWo
     EInkDynamicDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus);
     ~EInkDynamicDisplay();
 
-    // Methods to enable or disable unlimited fast refresh mode
-    void enableUnlimitedFastMode() { addFrameFlag(UNLIMITED_FAST); }
-    void disableUnlimitedFastMode() { frameFlags = (frameFlagTypes)(frameFlags & ~UNLIMITED_FAST); }
-
     // What kind of frame is this
     enum frameFlagTypes : uint8_t {
         BACKGROUND = (1 << 0),  // For frames via display()
@@ -34,7 +30,6 @@ class EInkDynamicDisplay : public EInkDisplay, protected concurrency::NotifiedWo
         COSMETIC = (1 << 2),    // For splashes
         DEMAND_FAST = (1 << 3), // Special case only
         BLOCKING = (1 << 4),    // Modifier - block while refresh runs
-        UNLIMITED_FAST = (1 << 5)
     };
     void addFrameFlag(frameFlagTypes flag);
 

src/graphics/NomadStarLED.h

@@ -1,5 +0,0 @@
-#ifdef HAS_LP5562
-#include <LP5562.h>
-extern LP5562 rgbw;
-
-#endif

src/graphics/Screen.cpp

@@ -30,7 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #if !MESHTASTIC_EXCLUDE_GPS
 #include "GPS.h"
 #endif
-#include "ButtonThread.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "error.h"
@@ -1607,7 +1606,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
     if (on != screenOn) {
         if (on) {
             LOG_INFO("Turn on screen");
-            buttonThread->setScreenFlag(true);
             powerMon->setState(meshtastic_PowerMon_State_Screen_On);
 #ifdef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_ALDO2);
@@ -1643,12 +1641,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             setScreensaverFrames(einkScreensaver);
 #endif
             LOG_INFO("Turn off screen");
-            buttonThread->setScreenFlag(false);
-#ifdef ELECROW_ThinkNode_M1
-            if (digitalRead(PIN_EINK_EN) == HIGH) {
-                digitalWrite(PIN_EINK_EN, LOW);
-            }
-#endif
             dispdev->displayOff();
 #ifdef USE_ST7789
             SPI1.end();
@@ -2672,19 +2664,14 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     // minutes %= 60;
     // hours %= 24;
 
-    // Show uptime as days, hours, minutes OR seconds
-    std::string uptime = screen->drawTimeDelta(days, hours, minutes, seconds);
-
-    // Line 1 (Still)
-    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
-    if (config.display.heading_bold)
-        display->drawString(x - 1 + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
-
     display->setColor(WHITE);
 
     // Setup string to assemble analogClock string
     std::string analogClock = "";
 
+    // Show uptime as days, hours, minutes OR seconds
+    std::string uptime = screen->drawTimeDelta(days, hours, minutes, seconds);
+
     uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
     if (rtc_sec > 0) {
         long hms = rtc_sec % SEC_PER_DAY;
@@ -2717,6 +2704,9 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
         analogClock += timebuf;
     }
 
+    // Line 1
+    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
+
     // Line 2
     display->drawString(x, y + FONT_HEIGHT_SMALL * 1, analogClock.c_str());
 
@@ -2738,7 +2728,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
         drawGPSpowerstat(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
     }
 #endif
-/* Display a heartbeat pixel that blinks every time the frame is redrawn */
+    /* Display a heartbeat pixel that blinks every time the frame is redrawn */
 #ifdef SHOW_REDRAWS
     if (heartbeat)
         display->setPixel(0, 0);

src/graphics/ScreenFonts.h

@@ -16,10 +16,6 @@
 #include "graphics/fonts/OLEDDisplayFontsCS.h"
 #endif
 
-#ifdef CROWPANEL_ESP32S3_5_EPAPER
-#include "graphics/fonts/EinkDisplayFonts.h"
-#endif
-
 #ifdef OLED_PL
 #define FONT_SMALL_LOCAL ArialMT_Plain_10_PL
 #else
@@ -77,15 +73,6 @@
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER)
-#undef FONT_SMALL
-#undef FONT_MEDIUM
-#undef FONT_LARGE
-#define FONT_SMALL Monospaced_plain_30
-#define FONT_MEDIUM Monospaced_plain_30
-#define FONT_LARGE Monospaced_plain_30
-#endif
-
 #define _fontHeight(font) ((font)[1] + 1) // height is position 1
 
 #define FONT_HEIGHT_SMALL _fontHeight(FONT_SMALL)

src/graphics/fonts/EinkDisplayFonts.h

@@ -1,14 +0,0 @@
-#ifndef EINKDISPLAYFONTS_h
-#define EINKDISPLAYFONTS_h
-
-#ifdef ARDUINO
-#include <Arduino.h>
-#elif __MBED__
-#define PROGMEM
-#endif
-
-/**
- * Monospaced Plain 30
- */
-extern const uint8_t Monospaced_plain_30[] PROGMEM;
-#endif

src/graphics/niche/Drivers/Backlight/LatchingBacklight.cpp

@@ -40,11 +40,13 @@ void LatchingBacklight::setPin(uint8_t pin, bool activeWhen)
 // Ensures the backlight is off
 int LatchingBacklight::beforeDeepSleep(void *unused)
 {
-    // Contingency only
-    // - pin wasn't set
+    // We shouldn't need to guard the block like this
+    // Contingency for:
+    // - settings corruption: settings.optionalMenuItems.backlight guards backlight code in MenuApplet
+    // - improper use in the future
     if (pin != (uint8_t)-1) {
         off();
-        pinMode(pin, INPUT); // High impedance - unnecessary?
+        pinMode(pin, INPUT); // High impedence - unnecessary?
     } else
         LOG_WARN("LatchingBacklight instantiated, but pin not set");
     return 0; // Continue with deep sleep

src/graphics/niche/Drivers/EInk/EInk.cpp

@@ -6,13 +6,13 @@ using namespace NicheGraphics::Drivers;
 
 // Separate from EInk::begin method, as derived class constructors can probably supply these parameters as constants
 EInk::EInk(uint16_t width, uint16_t height, UpdateTypes supported)
-    : concurrency::OSThread("EInkDriver"), width(width), height(height), supportedUpdateTypes(supported)
+    : concurrency::OSThread("E-Ink Driver"), width(width), height(height), supportedUpdateTypes(supported)
 {
     OSThread::disable();
 }
 
 // Used by NicheGraphics implementations to check if a display supports a specific refresh operation.
-// Whether or not the update type is supported is specified in the constructor
+// Whether or the update type is supported is specified in the constructor
 bool EInk::supports(UpdateTypes type)
 {
     // The EInkUpdateTypes enum assigns each type a unique bit. We are checking if that bit is set.
@@ -31,8 +31,8 @@ bool EInk::supports(UpdateTypes type)
 void EInk::beginPolling(uint32_t interval, uint32_t expectedDuration)
 {
     updateRunning = true;
+    updateBegunAt = millis();
     pollingInterval = interval;
-    pollingBegunAt = millis();
 
     // To minimize load, we can choose to delay polling for a few seconds, if we know roughly how long the update will take
     // By default, expectedDuration is 0, and we'll start polling immediately
@@ -45,26 +45,10 @@ void EInk::beginPolling(uint32_t interval, uint32_t expectedDuration)
 // This is what allows us to update the display asynchronously
 int32_t EInk::runOnce()
 {
-    // Check for polling timeout
-    // Manually set at 10 seconds, in case some big task holds up the firmware's cooperative multitasking
-    if (millis() - pollingBegunAt > 10000)
-        failed = true;
-
-    // Handle failure
-    // - polling timeout
-    // - other error (derived classes)
-    if (failed) {
-        LOG_WARN("Display update failed. Check wiring & power supply.");
-        updateRunning = false;
-        failed = false;
-        return disable();
-    }
-
-    // If update not yet done
     if (!isUpdateDone())
         return pollingInterval; // Poll again in a few ms
 
-    // If update done
+    // If update done:
     finalizeUpdate();      // Any post-update code: power down panel hardware, hibernate, etc
     updateRunning = false; // Change what we report via EInk::busy()
     return disable();      // Stop polling

src/graphics/niche/Drivers/EInk/EInk.h

@@ -24,14 +24,14 @@ class EInk : private concurrency::OSThread
     enum UpdateTypes : uint8_t {
         UNSPECIFIED = 0,
         FULL = 1 << 0,
-        FAST = 1 << 1, // "Partial Refresh"
+        FAST = 1 << 1,
     };
 
     EInk(uint16_t width, uint16_t height, UpdateTypes supported);
     virtual void begin(SPIClass *spi, uint8_t pin_dc, uint8_t pin_cs, uint8_t pin_busy, uint8_t pin_rst = -1) = 0;
     virtual void update(uint8_t *imageData, UpdateTypes type) = 0; // Change the display image
     void await();                                                  // Wait for an in-progress update to complete before proceeding
-    bool supports(UpdateTypes type);                               // Can display perform a certain update type
+    bool supports(UpdateTypes type);                               // Can display perfom a certain update type
     bool busy() { return updateRunning; }                          // Display able to update right now?
 
     const uint16_t width; // Public so that NicheGraphics implementations can access. Safe because const.
@@ -41,15 +41,14 @@ class EInk : private concurrency::OSThread
     void beginPolling(uint32_t interval, uint32_t expectedDuration); // Begin checking repeatedly if update finished
     virtual bool isUpdateDone() = 0;                                 // Check once if update finished
     virtual void finalizeUpdate() {}                                 // Run any post-update code
-    bool failed = false;                                             // If an error occurred during update
 
   private:
     int32_t runOnce() override; // Repeated checking if update finished
 
     const UpdateTypes supportedUpdateTypes; // Capabilities of a derived display class
     bool updateRunning = false;             // see EInk::busy()
-    uint32_t pollingInterval = 0;           // How often to check if update complete (ms)
-    uint32_t pollingBegunAt = 0;            // To timeout during polling
+    uint32_t updateBegunAt;                 // For initial pause before polling for update completion
+    uint32_t pollingInterval;               // How often to check if update complete (ms)
 };
 
 } // namespace NicheGraphics::Drivers

src/graphics/niche/Drivers/EInk/GDEY0154D67.cpp

@@ -4,7 +4,7 @@
 
 using namespace NicheGraphics::Drivers;
 
-// Map the display controller IC's output to the connected panel
+// Map the display controller IC's output to the conected panel
 void GDEY0154D67::configScanning()
 {
     // "Driver output control"

src/graphics/niche/Drivers/EInk/HINK_E042A87.cpp

@@ -1,58 +0,0 @@
-#include "./HINK_E042A87.h"
-
-#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-
-using namespace NicheGraphics::Drivers;
-
-// Load settings about how the pixels are moved from old state to new state during a refresh
-// - manually specified,
-// - or with stored values from displays OTP memory
-void HINK_E042A87::configWaveform()
-{
-    sendCommand(0x3C); // Border waveform:
-    sendData(0x01);    // Follow LUT for VSH1
-
-    sendCommand(0x18); // Temperature sensor:
-    sendData(0x80);    // Use internal temperature sensor to select an appropriate refresh waveform
-}
-
-// Describes the sequence of events performed by the displays controller IC during a refresh
-// Includes "power up", "load settings from memory", "update the pixels", etc
-void HINK_E042A87::configUpdateSequence()
-{
-    switch (updateType) {
-    case FAST:
-        sendCommand(0x21); // Use both "old" and "new" image memory (differential)
-        sendData(0x00);
-        sendData(0x00);
-
-        sendCommand(0x22); // Set "update sequence"
-        sendData(0xFF);    // Differential, load waveform from OTP
-        break;
-
-    case FULL:
-    default:
-        sendCommand(0x21); // Bypass "old" image memory (non-differential)
-        sendData(0x40);
-        sendData(0x00);
-
-        sendCommand(0x22); // Set "update sequence":
-        sendData(0xF7);    // Non-differential, load waveform from OTP
-        break;
-    }
-}
-
-// Once the refresh operation has been started,
-// begin periodically polling the display to check for completion, using the normal Meshtastic threading code
-// Only used when refresh is "async"
-void HINK_E042A87::detachFromUpdate()
-{
-    switch (updateType) {
-    case FAST:
-        return beginPolling(50, 1000); // At least 1 second, then check every 50ms
-    case FULL:
-    default:
-        return beginPolling(100, 3500); // At least 3.5 seconds, then check every 100ms
-    }
-}
-#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/HINK_E042A87.h

@@ -1,43 +0,0 @@
-/*
-
-E-Ink display driver
-    - HINK-E042A87
-    - Manufacturer: Holitech
-    - Size: 4.2 inch
-    - Resolution: 400px x 300px
-    - Flex connector marking: HINK-E042A07-FPC-A1
-    - Silver sticker with QR code, marked: HE042A87
-
-    Note: as of Feb. 2025, these panels are used for "WeActStudio 4.2in B&W" display modules
-
-*/
-
-#pragma once
-
-#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-
-#include "configuration.h"
-
-#include "./SSD16XX.h"
-
-namespace NicheGraphics::Drivers
-{
-class HINK_E042A87 : public SSD16XX
-{
-    // Display properties
-  private:
-    static constexpr uint32_t width = 400;
-    static constexpr uint32_t height = 300;
-    static constexpr UpdateTypes supported = (UpdateTypes)(FULL | FAST);
-
-  public:
-    HINK_E042A87() : SSD16XX(width, height, supported) {}
-
-  protected:
-    void configWaveform() override;
-    void configUpdateSequence() override;
-    void detachFromUpdate() override;
-};
-
-} // namespace NicheGraphics::Drivers
-#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/LCMEN2R13EFC1.cpp

@@ -98,7 +98,6 @@ void LCMEN213EFC1::begin(SPIClass *spi, uint8_t pin_dc, uint8_t pin_cs, uint8_t
     reset();
 }
 
-// Display an image on the display
 void LCMEN213EFC1::update(uint8_t *imageData, UpdateTypes type)
 {
     this->updateType = type;
@@ -162,6 +161,13 @@ void LCMEN213EFC1::sendCommand(const uint8_t command)
 
 void LCMEN213EFC1::sendData(uint8_t data)
 {
+    // spi->beginTransaction(spiSettings);
+    // digitalWrite(pin_dc, HIGH); // DC pin HIGH indicates data, instead of command
+    // digitalWrite(pin_cs, LOW);
+    // spi->transfer(data);
+    // digitalWrite(pin_cs, HIGH);
+    // digitalWrite(pin_dc, HIGH);
+    // spi->endTransaction();
     sendData(&data, 1);
 }
 

src/graphics/niche/Drivers/EInk/LCMEN2R13EFC1.h

@@ -45,24 +45,21 @@ class LCMEN213EFC1 : public EInk
     void configFull(); // Configure display for FULL refresh
     void configFast(); // Configure display for FAST refresh
     void writeNewImage();
-    void writeOldImage(); // Used for "differential update", aka FAST refresh
+    void writeOldImage();
 
     void detachFromUpdate();
     bool isUpdateDone();
     void finalizeUpdate();
 
   protected:
-    uint8_t bufferOffsetX = 0; // In bytes. Panel x=0 does not always align with controller x=0. Quirky internal wiring?
-    uint8_t bufferRowSize = 0; // In bytes. Rows store 8 pixels per byte. Rounded up to fit (e.g. 122px would require 16 bytes)
-    uint32_t bufferSize = 0;   // In bytes. Rows * Columns
-    uint8_t *buffer = nullptr;
-    UpdateTypes updateType = UpdateTypes::UNSPECIFIED;
+    uint8_t bufferOffsetX; // In bytes. Panel x=0 does not always align with controller x=0. Quirky internal wiring?
+    uint8_t bufferRowSize; // In bytes. Rows store 8 pixels per byte. Rounded up to fit (e.g. 122px would require 16 bytes)
+    uint32_t bufferSize;   // In bytes. Rows * Columns
+    uint8_t *buffer;
+    UpdateTypes updateType;
 
-    uint8_t pin_dc = -1;
-    uint8_t pin_cs = -1;
-    uint8_t pin_busy = -1;
-    uint8_t pin_rst = -1;
-    SPIClass *spi = nullptr;
+    uint8_t pin_dc, pin_cs, pin_busy, pin_rst;
+    SPIClass *spi;
     SPISettings spiSettings = SPISettings(6000000, MSBFIRST, SPI_MODE0);
 };
 

src/graphics/niche/Drivers/EInk/README.md

@@ -3,7 +3,7 @@
 A driver for E-Ink SPI displays. Suitable for re-use by various NicheGraphics UIs.
 
 Your UI should use the class `NicheGraphics::Drivers::EInk` .
-When you set up a hardware variant, you will use one of the specific display model classes, which extend the EInk class.
+When you set up a hardware variant, you will use one of specific display model classes, which extend the EInk class.
 
 An example setup might look like this:
 
@@ -28,28 +28,18 @@ void setupNicheGraphics()
 }
 ```
 
-- [Methods](#methods)
-  - [`update(uint8_t *imageData, UpdateTypes type)`](#updateuint8_t-imagedata-updatetypes-type)
-  - [`await()`](#await)
-  - [`supports(UpdateTypes type)`](#supportsupdatetypes-type)
-  - [`busy()`](#busy)
-  - [`width()`](#width)
-  - [`height()`](#height)
-- [Supporting New Displays](#supporting-new-displays)
-  - [Controller IC](#controller-ic)
-  - [Finding Information](#finding-information)
-
 ## Methods
 
-### `update(uint8_t *imageData, UpdateTypes type)`
+### `update(uint8_t *imageData, UpdateTypes type, bool async=true)`
 
 Update the image on the display
 
 - _`imageData`_ to draw to the display.
 - _`type`_ which type of update to perform.
   - `FULL`
-  - `FAST` (partial refresh)
+  - `FAST`
   - (Other custom types may be possible)
+- _`async`_ whether to wait for update to complete, or continue code execution
 
 The imageData is a 1-bit image. X-Pixels are 8-per byte, with the MSB being the leftmost pixel. This was not an InkHUD design decision; it is the raw format accepted by the E-Ink display controllers ICs.
 
@@ -73,10 +63,6 @@ uint8_t xBits = (7-x) % 8;
 image[yByte + xByte] |= (1 << xBits); // Set pixel x=12, y=2
 ```
 
-### `await()`
-
-Wait for an in-progress update to complete before continuing
-
 ### `supports(UpdateTypes type)`
 
 Check if display supports a specific update type. `true` if supported.
@@ -89,44 +75,8 @@ Check if display is already performing an `update()`. `true` if already updating
 
 ### `width()`
 
-Width of the display, in pixels. Note: most displays are portrait. Your UI will need to implement rotation in software.
+Width of the display, in pixels. Note: most displays are portait. Your UI will need to implement rotation in software.
 
 ### `height()`
 
 Height of the display, in pixels. Note: most displays are portrait. Your UI will need to implement rotation in software.
-
-## Supporting New Displays
-
-_This topic is not covered in depth, but these notes may be helpful._
-
-The `InkHUD::Drivers::EInk` class contains only the mechanism for implementing an E-Ink driver on-top of Meshtastic's `OSThread`. A driver for a specific display needs to extend this class.
-
-### Controller IC
-
-If your display uses a controller IC from Solomon Systech, you can probably extend the existing `Drivers::SSD16XX` class, making only minor modifications.
-
-At this stage, displays using controller ICS from other manufacturers (UltraChip, Fitipower, etc) need to manually implemented. See `Drivers::LCMEN2R13EFC1` for an example.
-
-Generic base classes for manufacturers other than Solomon Systech might be added here in future.
-
-### Finding Information
-
-#### Flex-Connector Labels
-
-The orange flex-connector attached to E-Ink displays is often printed with an identifying label. This is not a _totally_ unique identifier, but does give a very strong clue as to the true model of the display, which can be used to search out further information.
-
-#### Datasheets
-
-The manufacturer of a DIY display module may publish a datasheet. These are often incomplete, but might reveal the true model of the display, or the controller IC.
-
-If you can determine the true model name of the display, you can likely find a more complete datasheet on the display manufacturer's website. This will often provide a "typical operating sequence"; a general overview of the code used to drive the display
-
-#### Example Code
-
-The manufacturer of a DIY module may publish example code. You may have more luck finding example code published by the display manufacturer themselves, if you can determine the true model of the panel. These examples are a very valuable reference.
-
-#### Other E-Ink drivers
-
-Libraries like ZinggJM's GxEPD2 can be valuable sources of information, although your panel may not be _specifically_ supported, and only _compatible_ with a driver there, so some caution is advised.
-
-The display selection file in GxEPD2's Hello World example is also a useful resource for matching "flex connector labels" with display models, but the flex connector label is _not_ a unique identifier, so this is only another clue.

src/graphics/niche/Drivers/EInk/SSD16XX.cpp

@@ -30,33 +30,18 @@ void SSD16XX::begin(SPIClass *spi, uint8_t pin_dc, uint8_t pin_cs, uint8_t pin_b
     pinMode(pin_busy, INPUT);
 
     // If using a reset pin, hold high
-    // Reset is active low for Solomon Systech ICs
+    // Reset is active low for solmon systech ICs
     if (pin_rst != 0xFF)
         pinMode(pin_rst, INPUT_PULLUP);
 
     reset();
 }
 
-// Poll the displays busy pin until an operation is complete
-// Timeout and set fail flag if something went wrong and the display got stuck
-void SSD16XX::wait(uint32_t timeout)
+void SSD16XX::wait()
 {
-    // Don't bother waiting if part of the update sequence failed
-    // In that situation, we're now just failing-through the process, until we can try again with next update.
-    if (failed)
-        return;
-
-    uint32_t startMs = millis();
-
     // Busy when HIGH
-    while (digitalRead(pin_busy) == HIGH) {
-        // Check for timeout
-        if (millis() - startMs > timeout) {
-            failed = true;
-            break;
-        }
+    while (digitalRead(pin_busy) == HIGH)
         yield();
-    }
 }
 
 void SSD16XX::reset()
@@ -65,9 +50,8 @@ void SSD16XX::reset()
     if (pin_rst != 0xFF) {
         pinMode(pin_rst, OUTPUT);
         digitalWrite(pin_rst, LOW);
-        delay(10);
-        digitalWrite(pin_rst, HIGH);
-        delay(10);
+        delay(50);
+        pinMode(pin_rst, INPUT_PULLUP);
         wait();
     }
 
@@ -77,11 +61,6 @@ void SSD16XX::reset()
 
 void SSD16XX::sendCommand(const uint8_t command)
 {
-    // Abort if part of the update sequence failed
-    // This will unlock again once we have failed-through the entire process
-    if (failed)
-        return;
-
     spi->beginTransaction(spiSettings);
     digitalWrite(pin_dc, LOW); // DC pin low indicates command
     digitalWrite(pin_cs, LOW);
@@ -93,16 +72,18 @@ void SSD16XX::sendCommand(const uint8_t command)
 
 void SSD16XX::sendData(uint8_t data)
 {
+    // spi->beginTransaction(spiSettings);
+    // digitalWrite(pin_dc, HIGH); // DC pin HIGH indicates data, instead of command
+    // digitalWrite(pin_cs, LOW);
+    // spi->transfer(data);
+    // digitalWrite(pin_cs, HIGH);
+    // digitalWrite(pin_dc, HIGH);
+    // spi->endTransaction();
     sendData(&data, 1);
 }
 
 void SSD16XX::sendData(const uint8_t *data, uint32_t size)
 {
-    // Abort if part of the update sequence failed
-    // This will unlock again once we have failed-through the entire process
-    if (failed)
-        return;
-
     spi->beginTransaction(spiSettings);
     digitalWrite(pin_dc, HIGH); // DC pin HIGH indicates data, instead of command
     digitalWrite(pin_cs, LOW);

src/graphics/niche/Drivers/EInk/SSD16XX.h

@@ -27,7 +27,7 @@ class SSD16XX : public EInk
     virtual void update(uint8_t *imageData, UpdateTypes type) override;
 
   protected:
-    virtual void wait(uint32_t timeout = 1000);
+    virtual void wait();
     virtual void reset();
     virtual void sendCommand(const uint8_t command);
     virtual void sendData(const uint8_t data);
@@ -39,24 +39,21 @@ class SSD16XX : public EInk
     virtual void configUpdateSequence(); // Tell controller IC which operations to run
 
     virtual void writeNewImage();
-    virtual void writeOldImage(); // Image which can be used at *next* update for "differential refresh"
+    virtual void writeOldImage();
 
     virtual void detachFromUpdate();
     virtual bool isUpdateDone() override;
     virtual void finalizeUpdate() override;
 
   protected:
-    uint8_t bufferOffsetX = 0; // In bytes. Panel x=0 does not always align with controller x=0. Quirky internal wiring?
-    uint8_t bufferRowSize = 0; // In bytes. Rows store 8 pixels per byte. Rounded up to fit (e.g. 122px would require 16 bytes)
-    uint32_t bufferSize = 0;   // In bytes. Rows * Columns
-    uint8_t *buffer = nullptr;
-    UpdateTypes updateType = UpdateTypes::UNSPECIFIED;
+    uint8_t bufferOffsetX; // In bytes. Panel x=0 does not always align with controller x=0. Quirky internal wiring?
+    uint8_t bufferRowSize; // In bytes. Rows store 8 pixels per byte. Rounded up to fit (e.g. 122px would require 16 bytes)
+    uint32_t bufferSize;   // In bytes. Rows * Columns
+    uint8_t *buffer;
+    UpdateTypes updateType;
 
-    uint8_t pin_dc = -1;
-    uint8_t pin_cs = -1;
-    uint8_t pin_busy = -1;
-    uint8_t pin_rst = -1;
-    SPIClass *spi = nullptr;
+    uint8_t pin_dc, pin_cs, pin_busy, pin_rst;
+    SPIClass *spi;
     SPISettings spiSettings = SPISettings(4000000, MSBFIRST, SPI_MODE0);
 };