Merge branch 'master' into NextHopRouter

First check if it's not still in the TxQueue

.devcontainer/Dockerfile

@@ -1,10 +1,9 @@
-# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
-# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
 
 USER root
 
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages
 RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     && apt-get -y install --no-install-recommends \
     ca-certificates \
@@ -28,15 +27,9 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     hwdata \
     gpg \
     gnupg2 \
-    libusb-1.0-0-dev \
-    libuv1-dev \
-    libi2c-dev \
-    libxcb-xkb-dev \
-    libxkbcommon-dev \
-    libinput-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
-RUN pipx install platformio
+RUN pipx install platformio==6.1.15
 
 COPY 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules
 

.devcontainer/setup.sh

@@ -1,6 +1,3 @@
 #!/usr/bin/env sh
 
 git submodule update --init
-
-pip install --no-cache-dir setuptools
-pipx install esptool

.gitattributes

@@ -1,5 +1,4 @@
 * text=auto eol=lf
-*.cmd text eol=crlf
-*.bat text eol=crlf
-*.ps1 text eol=crlf
+*.{cmd,[cC][mM][dD]} text eol=crlf
+*.{bat,[bB][aA][tT]} text eol=crlf
 *.{sh,[sS][hH]} text eol=lf

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -1,7 +1,7 @@
 name: Bug Report
 description: File a bug report
 title: "[Bug]: "
-labels: [bug, triage]
+labels: ["bug", "triage"]
 body:
   - type: markdown
     attributes:
@@ -72,15 +72,6 @@ body:
     validations:
       required: true
 
-  - type: checkboxes
-    id: mui
-    attributes:
-      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
-      options:
-        - label: Meshtastic UI aka MUI colorTFT
-        - label: InkHUD ePaper
-        - label: OLED slide UI on any display
-
   - type: input
     id: version
     attributes:

.github/ISSUE_TEMPLATE/New Board.yml

@@ -1,7 +1,7 @@
 name: New Board
 description: Request us to support new hardware
 title: "[Board]: "
-labels: [enhancement, triage]
+labels: ["enhancement", "triage"]
 body:
   - type: markdown
     attributes:

.github/ISSUE_TEMPLATE/feature.yml

@@ -1,7 +1,7 @@
 name: Feature Request
 description: Request a new feature
 title: "[Feature Request]: "
-labels: [enhancement]
+labels: ["enhancement"]
 body:
   - type: markdown
     attributes:

.github/actionlint.yaml

@@ -1,5 +0,0 @@
-# Configuration related to self-hosted runner.
-self-hosted-runner:
-  # Labels of self-hosted runner in array of strings.
-  labels:
-    - test-runner

.github/actions/build-variant/action.yml

@@ -34,7 +34,7 @@ inputs:
   arch:
     description: Processor arch name
     required: true
-    default: esp32
+    default: "esp32"
 
 runs:
   using: composite
@@ -43,13 +43,6 @@ runs:
       id: base
       uses: ./.github/actions/setup-base
 
-    - name: Get web ui version
-      if: inputs.include-web-ui == 'true'
-      id: webver
-      shell: bash
-      run: |
-        echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
-
     - name: Pull web ui
       if: inputs.include-web-ui == 'true'
       uses: dsaltares/fetch-gh-release-asset@master
@@ -58,7 +51,7 @@ runs:
         file: build.tar
         target: build.tar
         token: ${{ inputs.github_token }}
-        version: tags/v${{ steps.webver.outputs.ver }}
+        version: tags/v2.5.3
 
     - name: Unpack web ui
       if: inputs.include-web-ui == 'true'

.github/actions/setup-base/action.yml

@@ -1,13 +1,13 @@
-name: Setup Build Base Composite Action
-description: Base build actions for Meshtastic Platform IO steps
+name: "Setup Build Base Composite Action"
+description: "Base build actions for Meshtastic Platform IO steps"
 
 runs:
-  using: composite
+  using: "composite"
   steps:
     - name: Checkout code
       uses: actions/checkout@v4
       with:
-        submodules: recursive
+        submodules: "recursive"
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 

.github/actions/setup-native/action.yml

@@ -11,4 +11,4 @@ runs:
     - name: Install libs needed for native build
       shell: bash
       run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev
+        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev

.github/dependabot.yml

@@ -0,0 +1,26 @@
+version: 2
+updates:
+  - package-ecosystem: docker
+    directory: devcontainer
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: docker
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: gitsubmodule
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: github-actions
+    directory: /.github/workflows
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,6 +1,7 @@
-## 🙏 Thank you for sending in a pull request, here's some tips to get started!
-
 ### ❌ (Please delete all these tips and replace them with your text) ❌
+
+## Thank you for sending in a pull request, here's some tips to get started!
+
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
@@ -11,17 +12,4 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
-- Please do not submit untested code.
-- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
-
-
-## 🤝 Attestations
-- [ ] I have tested that my proposed changes behave as described.
-- [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
-  - [ ] Heltec (Lora32) V3
-  - [ ] LilyGo T-Deck 
-  - [ ] LilyGo T-Beam
-  - [ ] RAK WisBlock 4631
-  - [ ] Seeed Studio T-1000E tracker card
-  - [ ] Other (please specify below)

.github/workflows/build_debian_src.yml

@@ -4,7 +4,7 @@ on:
   workflow_call:
     secrets:
       PPA_GPG_PRIVATE_KEY:
-        required: false
+        required: true
     inputs:
       series:
         description: Ubuntu/Debian series to target

.github/workflows/build_nrf52.yml

@@ -7,8 +7,6 @@ on:
         required: true
         type: string
 
-permissions: read-all
-
 jobs:
   build-nrf52:
     runs-on: ubuntu-latest

.github/workflows/build_rpi2040.yml

@@ -7,8 +7,6 @@ on:
         required: true
         type: string
 
-permissions: read-all
-
 jobs:
   build-rpi2040:
     runs-on: ubuntu-latest

.github/workflows/build_stm32.yml

@@ -7,8 +7,6 @@ on:
         required: true
         type: string
 
-permissions: read-all
-
 jobs:
   build-stm32:
     runs-on: ubuntu-latest

.github/workflows/docker_build.yml

@@ -26,11 +26,6 @@ on:
         required: false
         type: boolean
         default: false
-      pio_env:
-        description: PlatformIO environment to build
-        required: false
-        type: string
-        default: native
     outputs:
       digest:
         description: Digest of built image
@@ -95,5 +90,3 @@ jobs:
           push: ${{ inputs.push }}
           tags: ${{ steps.meta.outputs.tags }} # Tag is only meant to be consumed by the "manifest" job
           platforms: ${{ inputs.platform }}
-          build-args: |
-            PIO_ENV=${{ inputs.pio_env }}

.github/workflows/generate-userprefs.yml

@@ -0,0 +1,35 @@
+name: Generate UsersPrefs JSON manifest
+
+on:
+  push:
+    paths:
+      - userPrefs.h
+    branches:
+      - master
+
+jobs:
+  generate-userprefs:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Install Clang
+        run: sudo apt-get install -y clang
+
+      - name: Install trunk
+        run: curl https://get.trunk.io -fsSL | bash
+
+      - name: Generate userPrefs.jsom
+        run: python3 ./bin/build-userprefs-json.py
+
+      - name: Trunk format json
+        run: trunk format userPrefs.json
+
+      - name: Commit userPrefs.json
+        run: |
+          git config --global user.email "actions@github.com"
+          git config --global user.name "GitHub Actions"
+          git add userPrefs.json
+          git commit -m "Update userPrefs.json"
+          git push

.github/workflows/main_matrix.yml

@@ -5,20 +5,14 @@ concurrency:
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
-    branches:
-      - master
-      - develop
-      - event/*
+    branches: [master, develop]
     paths-ignore:
       - "**.md"
       - version.properties
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
-    branches:
-      - master
-      - develop
-      - event/*
+    branches: [master, develop]
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -38,12 +32,12 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
+          if [[ "${{ github.head_ref }}" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
+          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
@@ -141,18 +135,16 @@ jobs:
       build_location: local
     secrets: inherit
 
-  package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
+  package-pio-deps-native:
     uses: ./.github/workflows/package_pio_deps.yml
     with:
-      pio_env: native-tft
+      pio_env: native
     secrets: inherit
 
   test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker-deb-amd64:
+  docker-debian-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -160,16 +152,7 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-deb-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
+  docker-alpine-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -177,16 +160,7 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-alp-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
+  docker-debian-arm64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -194,7 +168,7 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  docker-deb-armv7:
+  docker-debian-armv7:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -202,6 +176,17 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
+  after-checks:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    needs: [check]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
   gather-artifacts:
     permissions:
       contents: write
@@ -303,7 +288,7 @@ jobs:
     needs:
       - gather-artifacts
       - build-debian-src
-      - package-pio-deps-native-tft
+      - package-pio-deps-native
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -339,32 +324,46 @@ jobs:
           merge-multiple: true
           path: ./output/debian-src
 
-      - name: Download `native-tft` pio deps
+      - name: Download native pio deps
         uses: actions/download-artifact@v4
         with:
-          pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
+          pattern: platformio-deps-native-${{ steps.version.outputs.long }}
           merge-multiple: true
-          path: ./output/pio-deps-native-tft
+          path: ./output/pio-deps-native
 
-      - name: Zip Linux sources
+      - name: Zip linux sources
         working-directory: output
         run: |
           zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
+          zip -9 -r ./platformio-deps-native-${{ steps.version.outputs.long }}.zip ./pio-deps-native
 
       # For diagnostics
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
+      - name: Add linux sources to release
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
-          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
+      - name: Bump version.properties
+        run: >-
+          bin/bump_version.py
+
+      - name: Update debian changelog
+        run: >-
+          debian/ci_changelog.sh
+
+      - name: Create version.properties pull request
+        uses: peter-evans/create-pull-request@v7
+        with:
+          title: Bump version.properties
+          add-paths: |
+            version.properties
+            debian/changelog
+
   release-firmware:
     strategy:
       fail-fast: false
@@ -416,53 +415,9 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
+      - name: Add bins and debug elfs to release
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware]
-    env:
-      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ steps.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/nightly.yml

@@ -4,34 +4,16 @@ on:
     - cron: 0 8 * * 1-5
   workflow_dispatch: {}
 
-permissions: read-all
-
 jobs:
   trunk_check:
-    name: Trunk Check and Upload
-    runs-on: ubuntu-24.04
+    name: Trunk Check Upload
+    runs-on: ubuntu-latest
 
     steps:
       - name: Checkout
         uses: actions/checkout@v4
 
       - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
         with:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}
-
-  trunk_upgrade:
-    # See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
-    name: Trunk Upgrade (PR)
-    runs-on: ubuntu-24.04
-    permissions:
-      contents: write # For trunk to create PRs
-      pull-requests: write # For trunk to create PRs
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Trunk Upgrade
-        uses: trunk-io/trunk-action/upgrade@v1
-        with:
-          base: master

.github/workflows/release_channels.yml

@@ -43,64 +43,3 @@ jobs:
       copr_project: |-
         ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
     secrets: inherit
-
-  # Create a PR to bump version when a release is Published
-  bump-version:
-    if: github.event.action == 'published'
-    runs-on: ubuntu-latest
-    permissions:
-      pull-requests: write
-      contents: write
-    defaults:
-      run:
-        shell: bash
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Bump version.properties
-        run: |
-          # Bump version.properties
-          chmod +x ./bin/bump_version.py
-          ./bin/bump_version.py
-
-      - name: Get new release version string
-        run: |
-          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
-        id: new_version
-
-      - name: Ensure debian deps are installed
-        run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y devscripts
-
-      - name: Update debian changelog
-        run: |
-          # Update debian changelog
-          chmod +x ./debian/ci_changelog.sh
-          ./debian/ci_changelog.sh
-
-      - name: Bump org.meshtastic.meshtasticd.metainfo.xml
-        run: |
-          # Bump org.meshtastic.meshtasticd.metainfo.xml
-          pip install -r bin/bump_metainfo/requirements.txt -q
-          chmod +x ./bin/bump_metainfo/bump_metainfo.py
-          ./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.new_version.outputs.short }}"
-        env:
-          PIP_DISABLE_PIP_VERSION_CHECK: 1
-
-      - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v7
-        with:
-          base: ${{ github.event.repository.default_branch }}
-          title: Bump release version
-          commit-message: automated bumps
-          add-paths: |
-            version.properties
-            debian/changelog
-            bin/org.meshtastic.meshtasticd.metainfo.xml

.github/workflows/sec_sast_flawfinder.yml

@@ -0,0 +1,41 @@
+---
+name: Flawfinder Scan
+
+on:
+  push:
+    branches: [master, develop]
+    paths-ignore:
+      - "**.md"
+      - "version.properties"
+
+jobs:
+  flawfinder:
+    runs-on: ubuntu-latest
+    name: Flawfinder
+
+    steps:
+      # step 1
+      - name: clone application source code
+        uses: actions/checkout@v4
+
+      # step 2
+      - name: flawfinder_scan
+        uses: david-a-wheeler/flawfinder@2.0.19
+        with:
+          arguments: "--sarif ./"
+          output: "flawfinder_report.sarif"
+
+      # step 3
+      - name: save report as pipeline artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: flawfinder_report.sarif
+          overwrite: true
+          path: flawfinder_report.sarif
+
+      # step 4
+      - name: publish code scanning alerts
+        uses: github/codeql-action/upload-sarif@v3
+        with:
+          sarif_file: flawfinder_report.sarif
+          category: flawfinder

.github/workflows/sec_sast_semgrep_cron.yml

@@ -3,17 +3,14 @@ name: Semgrep Full Scan
 
 on:
   workflow_dispatch:
+    branches:
+      - master
   schedule:
-    - cron: 0 1 * * 6
-
-permissions:
-  actions: read
-  contents: read
-  security-events: write
+    - cron: "0 1 * * 6"
 
 jobs:
   semgrep-full:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     container:
       image: semgrep/semgrep
 

.github/workflows/sec_sast_semgrep_pull.yml

@@ -2,11 +2,9 @@
 name: Semgrep Differential Scan
 on: pull_request
 
-permissions: read-all
-
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-22.04
     container:
       image: semgrep/semgrep
 

.github/workflows/stale_bot.yml

@@ -16,8 +16,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v9.1.0
+        uses: actions/stale@v9.0.0
         with:
-          days-before-stale: 45
           exempt-issue-labels: pinned,3.0
           exempt-pr-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.0
+        uses: dorny/test-reporter@v1.9.1
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -2,14 +2,9 @@ name: End to end tests
 
 on:
   schedule:
-    - cron: 0 0 * * * # Run every day at midnight
+    - cron: "0 0 * * *" # Run every day at midnight
   workflow_dispatch: {}
 
-permissions:
-  contents: read
-  actions: read
-  checks: write
-
 jobs:
   native-tests:
     uses: ./.github/workflows/test_native.yml
@@ -47,7 +42,7 @@ jobs:
       - name: Setup Node
         uses: actions/setup-node@v4
         with:
-          node-version: 22
+          node-version: 18
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/trunk-check.yml

@@ -9,7 +9,7 @@ permissions: read-all
 jobs:
   trunk_check:
     name: Trunk Check Runner
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
     permissions:
       checks: write # For trunk to post annotations
       contents: read # For repo checkout
@@ -20,5 +20,3 @@ jobs:
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
-        with:
-          save-annotations: true

.github/workflows/trunk_annotate_pr.yml

@@ -1,26 +0,0 @@
-name: Annotate PR with trunk issues
-# See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#getting-inline-annotations-for-fork-prs
-
-on:
-  workflow_run:
-    workflows: [Pull Request] # Name from `trunk_check.yml`
-    types: [completed]
-
-permissions: read-all
-
-jobs:
-  trunk_check:
-    name: Trunk Code Quality Annotate
-    runs-on: ubuntu-24.04
-    permissions:
-      checks: write # For trunk to post annotations
-      contents: read # For repo checkout
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
-        with:
-          post-annotations: true

.github/workflows/trunk_format_pr.yml

@@ -4,15 +4,11 @@ on:
   issue_comment:
     types: [created]
 
-permissions: read-all
-
 jobs:
   trunk-fmt:
     if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
     runs-on: ubuntu-latest
-    permissions:
-      contents: write
-      pull-requests: write
+
     steps:
       - name: Checkout repository
         uses: actions/checkout@v4

.github/workflows/update_protobufs.yml

@@ -1,14 +1,10 @@
 name: Update protobufs and regenerate classes
 on: workflow_dispatch
 
-permissions: read-all
-
 jobs:
   update-protobufs:
     runs-on: ubuntu-latest
-    permissions:
-      contents: write
-      pull-requests: write
+
     steps:
       - name: Checkout code
         uses: actions/checkout@v4

.trunk/configs/.markdownlint.yaml

@@ -8,4 +8,3 @@ line_length: false
 spaces: false
 url: false
 whitespace: false
-headings: false

.trunk/configs/.prettierignore

@@ -1 +0,0 @@
-renovate.json

.trunk/trunk.yaml

@@ -1,35 +1,37 @@
 version: 0.1
 cli:
-  version: 1.24.0
+  version: 1.22.8
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.0
+      ref: v1.6.6
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.435
-    - renovate@40.34.4
-    - prettier@3.5.3
-    - trufflehog@3.88.34
-    - yamllint@1.37.1
-    - bandit@1.8.3
-    - trivy@0.62.1
+    - prettier@3.4.2
+    - trufflehog@3.86.1
+    - yamllint@1.35.1
+    - bandit@1.8.0
+    - checkov@3.2.334
+    - terrascan@1.19.9
+    - trivy@0.58.0
+    #- trufflehog@3.63.2-rc0
     - taplo@0.9.3
-    - ruff@0.11.11
-    - isort@6.0.1
-    - markdownlint@0.45.0
-    - oxipng@9.1.5
+    - ruff@0.8.3
+    - isort@5.13.2
+    - markdownlint@0.43.0
+    - oxipng@9.1.3
     - svgo@3.3.2
-    - actionlint@1.7.7
-    - flake8@7.2.0
+    - actionlint@1.7.4
+    - flake8@7.1.1
     - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@25.1.0
+    - black@24.10.0
     - git-diff-check
-    - gitleaks@8.26.0
+    - gitleaks@8.21.2
     - clang-format@16.0.3
+    #- prettier@3.3.3
   ignore:
     - linters: [ALL]
       paths:
@@ -38,7 +40,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@22.16.0
+    - node@18.20.5
 actions:
   disabled:
     - trunk-announce

.vscode/settings.json

@@ -7,62 +7,5 @@
   "cmake.configureOnOpen": false,
   "[cpp]": {
     "editor.defaultFormatter": "trunk.io"
-  },
-  "[powershell]": {
-    "editor.defaultFormatter": "ms-vscode.powershell"
-  },
-  "files.associations": {
-    "array": "cpp",
-    "atomic": "cpp",
-    "*.tcc": "cpp",
-    "cctype": "cpp",
-    "clocale": "cpp",
-    "cmath": "cpp",
-    "csignal": "cpp",
-    "cstdarg": "cpp",
-    "cstddef": "cpp",
-    "cstdint": "cpp",
-    "cstdio": "cpp",
-    "cstdlib": "cpp",
-    "cstring": "cpp",
-    "ctime": "cpp",
-    "cwchar": "cpp",
-    "cwctype": "cpp",
-    "deque": "cpp",
-    "list": "cpp",
-    "unordered_map": "cpp",
-    "unordered_set": "cpp",
-    "vector": "cpp",
-    "exception": "cpp",
-    "algorithm": "cpp",
-    "functional": "cpp",
-    "iterator": "cpp",
-    "map": "cpp",
-    "memory": "cpp",
-    "memory_resource": "cpp",
-    "numeric": "cpp",
-    "optional": "cpp",
-    "random": "cpp",
-    "string": "cpp",
-    "string_view": "cpp",
-    "system_error": "cpp",
-    "tuple": "cpp",
-    "type_traits": "cpp",
-    "utility": "cpp",
-    "fstream": "cpp",
-    "initializer_list": "cpp",
-    "iomanip": "cpp",
-    "iosfwd": "cpp",
-    "iostream": "cpp",
-    "istream": "cpp",
-    "limits": "cpp",
-    "new": "cpp",
-    "ostream": "cpp",
-    "sstream": "cpp",
-    "stdexcept": "cpp",
-    "streambuf": "cpp",
-    "cinttypes": "cpp",
-    "typeinfo": "cpp",
-    "*.xbm": "cpp"
   }
 }

Dockerfile

@@ -1,67 +1,48 @@
+# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore-all(hadolint/DL3008): Use latest version of apt packages for buildchain
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
+# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
-# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-bookworm AS builder
-ARG PIO_ENV=native
+FROM python:3.12-bookworm AS builder
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
 # Install Dependencies
 ENV PIP_ROOT_USER_ACTION=ignore
-RUN apt-get update && apt-get install --no-install-recommends -y \
-        curl wget g++ zip git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && pip install --no-cache-dir -U platformio \
-    && mkdir /tmp/firmware
+RUN apt-get update && apt-get install --no-install-recommends -y wget g++ zip git ca-certificates \
+        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
+        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && \
+    pip install --no-cache-dir -U platformio==6.1.16 && \
+    mkdir /tmp/firmware
 
 # Copy source code
 WORKDIR /tmp/firmware
 COPY . /tmp/firmware
 
 # Build
-RUN bash ./bin/build-native.sh "$PIO_ENV" && \
+RUN bash ./bin/build-native.sh && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
-# Fetch web assets
-RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/firmware/bin/web.version)/build.tar" -o /tmp/web.tar \
-    && mkdir -p /tmp/web \
-    && tar -xf /tmp/web.tar -C /tmp/web/ \
-    && gzip -dr /tmp/web \
-    && rm /tmp/web.tar
 
 ##### PRODUCTION BUILD #############
 
 FROM debian:bookworm-slim
-LABEL org.opencontainers.image.title="Meshtastic" \
-      org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
-      org.opencontainers.image.url="https://meshtastic.org" \
-      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
-      org.opencontainers.image.authors="Meshtastic" \
-      org.opencontainers.image.licenses="GPL-3.0-or-later" \
-      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
 # nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
 USER root
 
-RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7 libssl3 \
-        libx11-6 libinput10 libxkbcommon-x11-0 \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* \
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
 
 # Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 
@@ -70,9 +51,7 @@ VOLUME /var/lib/meshtasticd
 
 # Expose Meshtastic TCP API port from the host
 EXPOSE 4403
-# Expose Meshtastic Web UI port from the host
-EXPOSE 9443
 
-CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
+CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
 
-HEALTHCHECK NONE
+HEALTHCHECK NONE

README.md

@@ -1,7 +1,4 @@
-<div align="center" markdown="1">
-
-<img src=".github/meshtastic_logo.png" alt="Meshtastic Logo" width="80"/>
-<h1>Meshtastic Firmware</h1>
+# Meshtastic Firmware
 
 ![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/firmware/total)
 [![CI](https://img.shields.io/github/actions/workflow/status/meshtastic/firmware/main_matrix.yml?branch=master&label=actions&logo=github&color=yellow)](https://github.com/meshtastic/firmware/actions/workflows/ci.yml)
@@ -9,31 +6,13 @@
 [![Fiscal Contributors](https://opencollective.com/meshtastic/tiers/badge.svg?label=Fiscal%20Contributors&color=deeppink)](https://opencollective.com/meshtastic/)
 [![Vercel](https://img.shields.io/static/v1?label=Powered%20by&message=Vercel&style=flat&logo=vercel&color=000000)](https://vercel.com?utm_source=meshtastic&utm_campaign=oss)
 
-<a href="https://trendshift.io/repositories/5524" target="_blank"><img src="https://trendshift.io/api/badge/repositories/5524" alt="meshtastic%2Ffirmware | Trendshift" style="width: 250px; height: 55px;" width="250" height="55"/></a>
-
-</div>
-
-</div>
-
-<div align="center">
-	<a href="https://meshtastic.org">Website</a>
-	-
-	<a href="https://meshtastic.org/docs/">Documentation</a>
-</div>
-
 ## Overview
 
-This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
+This repository contains the device firmware for the Meshtastic project.
 
-Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
-
-### Get Started
-
-- 🔧 **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)** – Learn how to compile the firmware from source.
-- ⚡ **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)** – Install or update the firmware on your device.
-
-Join our community and help improve Meshtastic! 🚀
+- **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
+- **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
 ## Stats
 
-![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+![Alt](https://repobeats.axiom.co/api/embed/a92f097d9197ae853e780ec53d7d126e545629ab.svg "Repobeats analytics image")

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.6.x            | :white_check_mark: |
-| <= 2.5.x         | :x:                |
+| 2.5.x            | :white_check_mark: |
+| <= 2.4.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -1,19 +1,14 @@
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
+# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
-# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-alpine3.21 AS builder
-ARG PIO_ENV=native
+FROM python:3.12-alpine3.21 AS builder
+
 ENV PIP_ROOT_USER_ACTION=ignore
-
-RUN apk --no-cache add \
-        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev \
-    && rm -rf /var/cache/apk/* \
-    && pip install --no-cache-dir -U platformio \
-    && mkdir /tmp/firmware
+RUN apk add bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
+        libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone && \
+    pip install --no-cache-dir -U platformio==6.1.16 && \
+    mkdir /tmp/firmware
 
 WORKDIR /tmp/firmware
 COPY . /tmp/firmware
@@ -22,35 +17,21 @@ COPY . /tmp/firmware
 # Add `argp` for musl
 ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
 
-RUN bash ./bin/build-native.sh "$PIO_ENV" && \
+RUN bash ./bin/build-native.sh && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 # ##### PRODUCTION BUILD #############
 
 FROM alpine:3.21
-LABEL org.opencontainers.image.title="Meshtastic" \
-      org.opencontainers.image.description="Alpine Meshtastic daemon" \
-      org.opencontainers.image.url="https://meshtastic.org" \
-      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
-      org.opencontainers.image.authors="Meshtastic" \
-      org.opencontainers.image.licenses="GPL-3.0-or-later" \
-      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 
 # nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
 USER root
 
-RUN apk --no-cache add \
-        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
-        libx11 libinput libxkbcommon \
-    && rm -rf /var/cache/apk/* \
+RUN apk add libstdc++ libgpiod yaml-cpp libusb i2c-tools \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
-
-# Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-# Copy config templates
-COPY ./bin/config.d /etc/meshtasticd/available.d
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
 
 WORKDIR /var/lib/meshtasticd
 VOLUME /var/lib/meshtasticd

arch/esp32/esp32.ini

@@ -2,9 +2,7 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform =
-  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.10.0
+platform = platformio/espressif32@6.9.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -39,27 +37,19 @@ build_flags =
   -DLIBPAX_ARDUINO
   -DLIBPAX_WIFI
   -DLIBPAX_BLE
-  -DHAS_UDP_MULTICAST=1
   ;-DDEBUG_HEAP
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/896f1771ceb5979987a0b41028bf1b4e7aad419b.zip
-  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@^1.4.3
-  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
-  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@^0.2.7
-  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
+  h2zero/NimBLE-Arduino@^1.4.2
+  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
+  lewisxhe/XPowersLib@^0.2.6
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
 
 lib_ignore = 
   segger_rtt
@@ -75,4 +65,4 @@ lib_ignore =
 
 ; customize the partition table
 ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+board_build.partitions = partition-table.csv

arch/esp32/esp32c6.ini

@@ -1,8 +1,6 @@
 [esp32c6_base]
 extends = esp32_base
-platform =
-  # Do not renovate until we have switched to pioarduino tagged builds
-  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
+platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
 build_flags =
   ${arduino_base.build_flags}
   -Wall
@@ -25,14 +23,10 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@^0.2.7
-  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  lewisxhe/XPowersLib@^0.2.6
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
 
 build_src_filter = 
  ${esp32_base.build_src_filter} -<mesh/http> 
@@ -44,4 +38,4 @@ lib_ignore =
   NonBlockingRTTTL
   NimBLE-Arduino
   libpax
-  
+  

arch/esp32/esp32s2.ini

@@ -16,4 +16,4 @@ build_flags =
 lib_ignore = 
   ${esp32_base.lib_ignore} 
   NimBLE-Arduino
-  libpax
+  libpax

arch/esp32/esp32s3.ini

@@ -3,3 +3,4 @@ extends = esp32_base
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
+

arch/nrf52/nrf52.ini

@@ -1,15 +1,11 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform =
-  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
-  platformio/nordicnrf52@^10.8.0
+platform = platformio/nordicnrf52@^10.7.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
-  # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
-  ; Don't renovate toolchain-gccarmnoneeabi
-  platformio/toolchain-gccarmnoneeabi@~1.90301.0
+  framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino.git#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
 build_flags =
@@ -21,6 +17,7 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -DMAX_NUM_NODES=80
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -28,9 +25,8 @@ build_src_filter =
 lib_deps=
   ${arduino_base.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  rweather/Crypto@^0.4.0
 
 lib_ignore =
   BluetoothOTA
-  lvgl
+  lvgl

arch/nrf52/nrf52840.ini

@@ -6,9 +6,7 @@ build_flags = ${nrf52_base.build_flags}
 lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
-  # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -1,8 +1,6 @@
 ; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
 [portduino_base]
-platform =
-  # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/622341c6de8a239704318b10c3dbb00c21a3eab3.zip
+platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
 framework = arduino
 
 build_src_filter = 
@@ -17,19 +15,18 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
+  -<modules/Telemetry/EnvironmentTelemetry.cpp>
+  -<modules/Telemetry/AirQualityTelemetry.cpp>
+  -<modules/Telemetry/Sensor>
   +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   ${radiolib_base.lib_deps}
-  ${environmental_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  rweather/Crypto@^0.4.0
   lovyan03/LovyanGFX@^1.2.0
-  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
-  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
+  https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
 
 build_flags =
   ${arduino_base.build_flags}
@@ -37,15 +34,10 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
   -li2c
-  -luv
-  -std=gnu17
   -std=c++17
-
-lib_ignore = Adafruit NeoPixel

arch/rp2xx0/rp2040.ini

@@ -1,13 +1,8 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform =
-  # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
 extends = arduino_base
-platform_packages =
-  # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -23,12 +18,9 @@ build_src_filter =
 
 lib_ignore =
   BluetoothOTA
-  lvgl
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  rweather/Crypto

arch/rp2xx0/rp2350.ini

@@ -1,13 +1,8 @@
-; Common settings for rp2350 Processor based targets
+; Common settings for rp2040 Processor based targets
 [rp2350_base]
-platform =
-  # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
 extends = arduino_base
-platform_packages =
-  # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -15,6 +10,7 @@ build_flags =
   ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
   -Isrc/platform/rp2xx0
   -D__PLAT_RP2350__
+#  -D _POSIX_THREADS
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>
 
@@ -25,7 +21,5 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
+  rweather/Crypto

arch/stm32/stm32.ini

@@ -1,18 +1,13 @@
 [stm32_base]
 extends = arduino_base
-platform =
-  # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.1.0
-platform_packages =
-  # TODO renovate
-  platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
-extra_scripts =
-  ${env.extra_scripts}
-  post:extra_scripts/extra_stm32.py
+platform = ststm32
+platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#ea74156acd823b6d14739f389e6cdc648f8ee36e
 
 build_type = release
 
-build_flags =
+;board_build.flash_offset = 0x08000000
+
+build_flags = 
   ${arduino_base.build_flags}
   -flto
   -Isrc/platform/stm32wl -g
@@ -23,25 +18,27 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN
   -DMESHTASTIC_EXCLUDE_MQTT
   -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  -DMESHTASTIC_EXCLUDE_PKI
   -DMESHTASTIC_EXCLUDE_GPS
-  ;-DDEBUG_MUTE
+;  -DVECT_TAB_OFFSET=0x08000000
+  -DconfigUSE_CMSIS_RTOS_V2=1
+;  -DSPI_MODE_0=SPI_MODE0
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-
-build_src_filter =
+  
+build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
-debug_tool = stlink
 
 lib_deps =
   ${env.lib_deps}
-  ${radiolib_base.lib_deps}
-  # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
+  charlesbaynham/OSFS@^1.2.3
+  jgromes/RadioLib@7.0.2
+  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
   mathertel/OneButton@2.6.1
-  Wire
+  Wire

bin/99-meshtasticd-udev.rules

@@ -1,7 +0,0 @@
-# Set spidev ownership to 'spi' group
-SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
-# Allow access to USB CH341 devices
-SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
-# Set gpio ownership to 'gpio' group
-SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
-SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

bin/build-esp32.sh

@@ -35,11 +35,11 @@ cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
 pio run --environment $1 -t buildfs
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$VERSION.bin
 # Remove webserver files from the filesystem and rebuild
 ls -l data/static # Diagnostic list of files
 rm -rf data/static
 pio run --environment $1 -t buildfs
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$1-$VERSION.bin
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
-cp bin/device-update.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -15,7 +15,6 @@ platformioFailed() {
 
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
-PIO_ENV=${1:-native}
 
 OUTDIR=release/
 
@@ -25,7 +24,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg update --environment "$PIO_ENV" || platformioFailed
-pio run --environment "$PIO_ENV" || platformioFailed
-cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
+platformio pkg update --environment native || platformioFailed
+pio run --environment native || platformioFailed
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/bump_metainfo/bump_metainfo.py

@@ -1,72 +0,0 @@
-#!/usr/bin/env python3
-import argparse
-import xml.etree.ElementTree as ET
-from defusedxml.ElementTree import parse
-from datetime import datetime, timezone
-
-
-# Indent by 2 spaces to align with xml formatting.
-def indent(elem, level=0):
-    i = "\n" + level * "  "
-    if len(elem):
-        if not elem.text or not elem.text.strip():
-            elem.text = i + "  "
-        for child in elem:
-            indent(child, level + 1)
-        if not child.tail or not child.tail.strip():
-            child.tail = i
-    if level and (not elem.tail or not elem.tail.strip()):
-        elem.tail = i
-
-
-def main():
-    parser = argparse.ArgumentParser(
-        description="Prepend new release entry to metainfo.xml file.")
-    parser.add_argument("--file", help="Path to the metainfo.xml file",
-                        default="org.meshtastic.meshtasticd.metainfo.xml")
-    parser.add_argument("version", help="Version string (e.g. 2.6.4)")
-    parser.add_argument("--date", help="Release date (YYYY-MM-DD), defaults to today",
-                        default=datetime.now(timezone.utc).date().isoformat())
-
-    args = parser.parse_args()
-
-    tree = parse(args.file)
-    root = tree.getroot()
-
-    releases = root.find('releases')
-    if releases is None:
-        raise RuntimeError("<releases> element not found in XML.")
-
-    existing_versions = {
-        release.get('version'): release
-        for release in releases.findall('release')
-    }
-    existing_release = existing_versions.get(args.version)
-
-    if existing_release is not None:
-        if not existing_release.get('date'):
-            print(f"Version {args.version} found without date. Adding date...")
-            existing_release.set('date', args.date)
-        else:
-            print(
-                f"Version {args.version} is already present with date, skipping insertion.")
-    else:
-        new_release = ET.Element('release', {
-            'version': args.version,
-            'date': args.date
-        })
-        url = ET.SubElement(new_release, 'url', {'type': 'details'})
-        url.text = f"https://github.com/meshtastic/firmware/releases?q=tag%3Av{args.version}"
-
-        releases.insert(0, new_release)
-
-        indent(releases, level=1)
-        releases.tail = "\n"
-
-        print(f"Inserted new release: {args.version}")
-
-    tree.write(args.file, encoding='UTF-8', xml_declaration=True)
-
-
-if __name__ == "__main__":
-    main()

bin/bump_metainfo/requirements.txt

@@ -1 +0,0 @@
-defusedxml==0.7.1

bin/config-dist.yaml

@@ -6,12 +6,6 @@
 ### Including the "Module:" line!
 ---
 Lora:
-  # Default to auto-detecting the module type
-  # This will be overridden by configs from config.d
-  Module: auto
-
-#  # Uncomment to enable Simulation mode, or use --sim
-#  Module: sim
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -188,22 +182,14 @@ Logging:
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
-#  Port: 9443 # Port for Webserver & Webservices
+#  Port: 443 # Port for Webserver & Webservices
 #  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
 #  SSLKey: /etc/meshtasticd/ssl/private_key.pem # Path to SSL Key, generated if not present
 #  SSLCert: /etc/meshtasticd/ssl/certificate.pem # Path to SSL Certificate, generated if not present
 
-
-HostMetrics:
-#  ReportInterval: 30 # Interval in minutes between HostMetrics report packets, or 0 for disabled
-#  Channel: 0 # channel to send Host Metrics over. Defaults to the primary channel.
-#  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
-
-
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
   ConfigDirectory: /etc/meshtasticd/config.d/
-  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
-#  MACAddressSource: eth0
+#  MACAddressSource: eth0

bin/config.d/MUI/X11_480x480.yaml

@@ -1,4 +0,0 @@
-Display:
-  Panel: X11
-  Width: 480
-  Height: 480

bin/config.d/lora-Adafruit-RFM9x

@@ -0,0 +1,5 @@
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -1,6 +0,0 @@
-Lora:
-  Module: RF95  # Adafruit RFM9x
-  Reset: 25
-  CS: 7
-  IRQ: 22
-#  Busy: 23

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,5 +1,3 @@
-# MeshAdv-Pi E22-900M30S
-# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
 Lora:
   Module: sx1262
   CS: 21
@@ -11,4 +9,4 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   # Only for E22-900M33S:
   # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
+  # SX126X_MAX_POWER: 8

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -1,11 +0,0 @@
-# MeshAdv Mini E22-900M22S
-# https://github.com/chrismyers2000/MeshAdv-Mini
-Lora:
-  Module: sx1262  # Ebyte E22-900M22S 
-  CS: 8
-  IRQ: 16
-  Busy: 20
-  Reset: 24
-  TXen: 13
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-piggystick-lr1121.yaml

@@ -1,11 +0,0 @@
-Lora:
-  Module: lr1121
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  spidev: ch341
-  DIO3_TCXO_VOLTAGE: 1.8
-#  USB_Serialnum: 12345678
-  USB_PID: 0x5512
-  USB_VID: 0x1A86

bin/config.d/lora-raxda-rock2f-starter-edition-hat.yaml

@@ -1,49 +0,0 @@
-Lora:
-
-### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx
-### https://github.com/markbirss/rock-2f
-### https://github.com/markbirss/lora-starter-edition-sx1262-i2c
-### https://github.com/radxa-pkg/radxa-overlays/blob/main/arch/arm64/boot/dts/rockchip/overlays/rk3528-spi0-cs1-spidev.dts
-### Require install of https://github.com/radxa-pkg/radxa-overlays and rk3528-spi0-cs1-spidev.dtbo copied to /boot/dtb/rockchip/overlay and enabled 
-### in  /boot/armbianEnv.txt - overlays=rk3528-spi0-cs1-spidev
-### The Radxa Rock 2F employs multiple gpio chips.
-### Each gpio pin must be unique, but can be assigned to a specific gpio chip and line.
-### In case solely a no. is given, the default gpio chip and pin == line will be employed.
-###
-  Module: sx1262  # Radxa Rock 2F + Starter Edition SX1262 HAT by Mark Birss
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: 1.8
-  spidev: spidev0.1
-  CS:             # NSS     PIN_24 -> chip 4, line 14
-    pin: 24
-    gpiochip: 4
-    line: 14
-  SCK:            # SCK     PIN_23 -> chip 4, line 12
-    pin: 23
-    gpiochip: 4
-    line: 12
-  Busy:           # BUSY    PIN_7 -> chip 4, line 6
-    pin: 7
-    gpiochip: 4
-    line: 6
-  MOSI:           # MOSI    PIN_19 -> chip 4, line 10
-    pin: 19
-    gpiochip: 4
-    line: 10
-  MISO:           # MISO    PIN_21 -> chip 4, line 11
-    pin: 21
-    gpiochip: 4
-    line: 11
-  Reset:          # NRST    PIN_12 -> chip 1, line 13
-    pin: 12
-    gpiochip: 1
-    line: 13
-  IRQ:            # DIO1    PIN_15 -> chip 4, line 22
-    pin: 15
-    gpiochip: 4
-    line: 22
-#  RXen:           # RXEN    PIN_22 -> chip 3!, line 17
-#    pin: 22
-#    gpiochip: 3
-#    line: 17
-#  TXen: RADIOLIB_NC # TXEN   no PIN, no line, fallback to default gpio chip

bin/config.d/lora-starter-edition-sx1262-i2c.yaml

@@ -1,10 +0,0 @@
-# https://www.waveshare.com/core1262-868m.htm
-# https://github.com/markbirss/lora-starter-edition-sx1262-i2c
-Lora:
-  Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 8
-  IRQ: 22
-  Busy: 4
-  Reset: 18

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -1,17 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  RXen: 1
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  # Optional: Reduce power to 10 dBm to
-  # avoid over-drawing the USB port
-  # SX126X_MAX_POWER: 10
-  # Optional: Set the serial number for multi-radio support
-  # USB_Serialnum: 13374201

bin/config.d/lora-ws-raspberry-pi-pico-to-rpi-adapter.yaml

@@ -1,10 +0,0 @@
-# https://www.waveshare.com/pico-lora-sx1262-868m.htm
-# https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
-Lora:
-  Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 21
-  IRQ: 16
-  Busy: 20
-  Reset: 18

bin/device-install.bat

@@ -1,295 +1,72 @@
 @ECHO OFF
-SETLOCAL EnableDelayedExpansion
-TITLE Meshtastic device-install
 
-SET "SCRIPT_NAME=%~nx0"
-SET "DEBUG=0"
-SET "PYTHON="
-SET "WEB_APP=0"
-SET "TFT_BUILD=0"
-SET "BIGDB8=0"
-SET "BIGDB16=0"
-SET "ESPTOOL_BAUD=115200"
-SET "ESPTOOL_CMD="
-SET "LOGCOUNTER=0"
+set PYTHON=python
+set WEB_APP=0
 
-@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
-SET "C3=esp32c3"
-@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
 
-GOTO getopts
-:help
-ECHO Flash image file to device, but first erasing and writing system information.
-ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web)
-ECHO.
-ECHO Options:
-ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
-ECHO                      The file must be located in this current directory.
-ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
-ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
-ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
-ECHO                      If supplied the script will use python.
-ECHO                      If not supplied the script will try to find esptool in Path.
-ECHO     --web            Enable WebUI. (default: false)
-ECHO.
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
-GOTO eof
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web]
+echo Flash image file to device, but first erasing and writing system information
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+echo     --web            Flash WEB APP.
+goto EOF
 
-:version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
-ECHO Meshtastic
-GOTO eof
-
-:getopts
-IF "%~1"=="" GOTO endopts
-IF /I "%~1"=="-?" GOTO help
-IF /I "%~1"=="-h" GOTO help
-IF /I "%~1"=="--help" GOTO help
-IF /I "%~1"=="-v" GOTO version
-IF /I "%~1"=="--version" GOTO version
-IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
-IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
-IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
-IF /I "%~1"=="--web" SET "WEB_APP=1"
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+if /I "%1"=="--web" set WEB_APP=1 & SHIFT
 SHIFT
-GOTO getopts
-:endopts
+IF NOT "__%1__"=="____" goto GETOPTS
 
-CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
-IF "__!FILENAME!__"=="____" (
-    CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
-    GOTO help
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
-    IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
-        GOTO help
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+    goto HELP
+)
+IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
+    echo Trying to flash update %FILENAME%, but first erasing and writing system information"
+    %ESPTOOL_CMD% --baud 115200 erase_flash
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
+    
+    @REM Account for S3 and C3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
+        IF x%FILENAME:esp32c3=%==x%FILENAME% (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
+        ) else (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
+        )
+    ) else (
+        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
     )
-    IF "__!FILENAME:firmware-=!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-* file."
-        GOTO help
+    IF %WEB_APP%==1 (
+        for %%f in (littlefswebui-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
+    ) else (
+        for %%f in (littlefs-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
     )
-    @REM Remove ".\" or "./" file prefix if present.
-    SET "FILENAME=!FILENAME:.\=!"
-    SET "FILENAME=!FILENAME:./=!"
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
-IF NOT EXIST !FILENAME! (
-    CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
-    GOTO eof
-)
-
-IF NOT "!FILENAME:update=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
-    CALL :LOG_MESSAGE INFO "Use script device-update.bat to flash update !FILENAME!."
-    GOTO eof
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
-IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
-    CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
-    WHERE esptool >nul 2>&1
-    IF %ERRORLEVEL% EQU 0 (
-        @REM WHERE exits with code 0 if esptool is found.
-        SET "ESPTOOL_CMD=esptool"
-    ) ELSE (
-        SET "ESPTOOL_CMD=python -m esptool"
-        CALL :RESET_ERROR
-    )
-)
-
-CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
-!ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
-    CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
-    EXIT /B 1
-    GOTO eof
-)
-IF %DEBUG% EQU 1 (
-    CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
-    SET "ESPTOOL_CMD=REM !ESPTOOL_CMD!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
-IF "__!ESPTOOL_PORT!__" == "____" (
-    CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
-) ELSE (
-    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
-    CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
-)
-CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
-
-@REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
-@REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
-IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
-    IF %WEB_APP% EQU 1 (
-        CALL :LOG_MESSAGE ERROR "Cannot enable WebUI (--web) and MUI." & GOTO eof
-    )
-    SET "TFT_BUILD=1"
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
-)
-
-FOR %%a IN (%BIGDB_8MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %BIGDB_8MB%.
-        SET "BIGDB8=1"
-        GOTO end_loop_bigdb_8mb
-    )
-)
-:end_loop_bigdb_8mb
-
-FOR %%a IN (%BIGDB_16MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %BIGDB_16MB%.
-        SET "BIGDB16=1"
-        GOTO end_loop_bigdb_16mb
-    )
-)
-:end_loop_bigdb_16mb
-
-IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
-IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
-
-@REM Extract BASENAME from %FILENAME% for later use.
-SET "BASENAME=!FILENAME:firmware-=!"
-CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
-
-@REM Account for S3 and C3 board's different OTA partition.
-FOR %%a IN (%S3%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %S3%.
-        SET "OTA_FILENAME=bleota-s3.bin"
-        GOTO :end_loop_s3
-    )
-)
-
-FOR %%a IN (%C3%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %C3%.
-        SET "OTA_FILENAME=bleota-c3.bin"
-        GOTO :end_loop_c3
-    )
-)
-
-@REM Everything else
-SET "OTA_FILENAME=bleota.bin"
-:end_loop_s3
-:end_loop_c3
-CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
-
-@REM Check if (--web) is enabled and prefix BASENAME with "littlefswebui-" else "littlefs-".
-IF %WEB_APP% EQU 1 (
-    CALL :LOG_MESSAGE INFO "WebUI selected."
-    SET "SPIFFS_FILENAME=littlefswebui-%BASENAME%"
-) ELSE (
-    SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
-)
-CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
-
-@REM Default offsets.
-@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
-SET "OTA_OFFSET=0x260000"
-SET "SPIFFS_OFFSET=0x300000"
-
-@REM Offsets for BigDB 8mb.
-IF %BIGDB8% EQU 1 (
-    SET "OTA_OFFSET=0x340000"
-    SET "SPIFFS_OFFSET=0x670000"
-)
-
-@REM Offsets for BigDB 16mb.
-IF %BIGDB16% EQU 1 (
-    SET "OTA_OFFSET=0x650000"
-    SET "SPIFFS_OFFSET=0xc90000"
-)
-
-CALL :LOG_MESSAGE DEBUG "Set OTA_OFFSET to: !OTA_OFFSET!"
-CALL :LOG_MESSAGE DEBUG "Set SPIFFS_OFFSET to: !SPIFFS_OFFSET!"
-
-@REM Ensure target files exist before flashing operations.
-IF NOT EXIST !FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
-IF NOT EXIST !OTA_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!OTA_FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
-IF NOT EXIST !SPIFFS_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!SPIFFS_FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
-
-@REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash "!FILENAME!", but first erasing and writing system information..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase_flash || GOTO eof
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x00 "!FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Trying to flash BLEOTA "!OTA_FILENAME!" at OTA_OFFSET !OTA_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Trying to flash SPIFFS "!SPIFFS_FILENAME!" at SPIFFS_OFFSET !SPIFFS_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Script complete!."
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
-
-
-:RUN_ESPTOOL
-@REM Subroutine used to run ESPTOOL_CMD with arguments.
-@REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
-@REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
-IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-CALL :RESET_ERROR
-!ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
-IF %ERRORLEVEL% NEQ 0 (
-    CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-    EXIT /B %ERRORLEVEL%
-)
-GOTO :eof
-
-:LOG_MESSAGE
-@REM Subroutine used to print log messages in four different levels.
-@REM DEBUG messages only get printed if [-d] flag is passed to script.
-@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
-@REM.
-@REM Example:: CALL :LOG_MESSAGE INFO "Message."
-SET /A LOGCOUNTER=LOGCOUNTER+1
-IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-GOTO :eof
-
-:GET_TIMESTAMP
-@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
-@REM CALL :GET_TIMESTAMP
-@REM.
-@REM Updates: !TIMESTAMP!
-FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
-    SET "HH=%%a"
-    SET "MM=%%b"
-    SET "ss=%%c"
-)
-SET "TIMESTAMP=!HH!:!MM!:!ss!"
-GOTO :eof
-
-:RESET_ERROR
-@REM Subroutine to reset %ERRORLEVEL% to 0.
-@REM CALL :RESET_ERROR
-@REM.
-@REM Updates: %ERRORLEVEL%
-EXIT /B 0
-GOTO :eof
+:EOF

bin/device-install.sh

@@ -1,70 +1,18 @@
-#!/bin/bash
+#!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 WEB_APP=false
-TFT_BUILD=false
-MCU=""
-
-# Variant groups
-BIGDB_8MB=(
-	"picomputer-s3"
-	"unphone"
-	"seeed-sensecap-indicator"
-	"crowpanel-esp32s3"
-	"heltec_capsule_sensor_v3"
-	"heltec-v3"
-	"heltec-vision-master-e213"
-	"heltec-vision-master-e290"
-	"heltec-vision-master-t190"
-	"heltec-wireless-paper"
-	"heltec-wireless-tracker"
-	"heltec-wsl-v3"
-	"icarus"
-	"seeed-xiao-s3"
-	"tbeam-s3-core"
-	"tracksenger"
-)
-BIGDB_16MB=(
-	"t-deck"
-	"mesh-tab"
-	"t-energy-s3"
-	"dreamcatcher"
-	"ESP32-S3-Pico"
-	"m5stack-cores3"
-	"station-g2"
-	"t-eth-elite"
-	"t-watch-s3"
-)
-S3_VARIANTS=(
-	"s3"
-	"-v3"
-	"t-deck"
-	"wireless-paper"
-	"wireless-tracker"
-	"station-g2"
-	"unphone"
-	"t-eth-elite"
- 	"mesh-tab"
-	"dreamcatcher"
-	"ESP32-S3-Pico"
-	"seeed-sensecap-indicator"
-	"heltec_capsule_sensor_v3"
-	"vision-master"
-	"icarus"
-	"tracksenger"
-	"elecrow-adv"
-)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-	ESPTOOL_CMD="$PYTHON -m esptool"
+    ESPTOOL_CMD="$PYTHON -m esptool"
 elif command -v esptool >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool"
+    ESPTOOL_CMD="esptool"
 elif command -v esptool.py >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool.py"
+    ESPTOOL_CMD="esptool.py"
 else
-	echo "Error: esptool not found"
-	exit 1
+    echo "Error: esptool not found"
+    exit 1
 fi
 
 set -e
@@ -72,141 +20,75 @@ set -e
 # Usage info
 show_help() {
 	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web]
-Flash image file to device, but first erasing and writing system information.
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--web]
+Flash image file to device, but first erasing and writing system information"
 
-    -h               Display this help and exit.
+    -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
-    --web            Enable WebUI. (Default: false)
+    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+    --web            Flash WEB APP.
 
 EOF
 }
-# Parse arguments using a single while loop
-while [ $# -gt 0 ]; do
-	case "$1" in
-	-h | --help)
+# Preprocess long options like --web
+for arg in "$@"; do
+    case "$arg" in
+        --web)
+            WEB_APP=true
+            shift # Remove this argument from the list
+            ;;
+    esac
+done
+
+while getopts ":hp:P:f:" opt; do
+	case "${opt}" in
+	h)
 		show_help
 		exit 0
 		;;
-	-p)
-		ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
-		shift
+	p)
+		export ESPTOOL_PORT=${OPTARG}
 		;;
-	-P)
-		PYTHON="$2"
-		shift
+	P)
+		PYTHON=${OPTARG}
 		;;
-	-f)
-		FILENAME="$2"
-		shift
-		;;
-	--web)
-		WEB_APP=true
-		;;
-	--) # Stop parsing options
-		shift
-		break
+	f)
+		FILENAME=${OPTARG}
 		;;
 	*)
-		echo "Unknown argument: $1" >&2
+		echo "Invalid flag."
+		show_help >&2
 		exit 1
 		;;
 	esac
-	shift # Move to the next argument
 done
+shift "$((OPTIND - 1))"
 
 [ -z "$FILENAME" -a -n "$1" ] && {
 	FILENAME=$1
 	shift
 }
 
-if [[ $FILENAME != firmware-* ]]; then
-  echo "Filename must be a firmware-* file."
-  exit 1
-fi
-
-# Check if FILENAME contains "-tft-" and prevent web/mui comingling.
-if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
-	TFT_BUILD=true
-	if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
-		echo "Cannot enable WebUI (--web) and MUI."
-		exit 1
-	fi
-fi
-
-# Extract BASENAME from %FILENAME% for later use.
-BASENAME="${FILENAME/firmware-/}"
-
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-	# Default littlefs* offset (--web).
-	OFFSET=0x300000
-
-	# Default OTA Offset
-	OTA_OFFSET=0x260000
-
-	# littlefs* offset for BigDB 8mb and OTA OFFSET.
-	for variant in "${BIGDB_8MB[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0x670000
-			OTA_OFFSET=0x340000
-		fi
-	done
-
-	# littlefs* offset for BigDB 16mb and OTA OFFSET.
-	for variant in "${BIGDB_16MB[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			OFFSET=0xc90000
-			OTA_OFFSET=0x650000
-		fi
-	done
-
-	# Account for S3 board's different OTA partition
-	# FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
-	for variant in "${S3_VARIANTS[@]}"; do
-		if [ -z "${FILENAME##*"$variant"*}" ]; then
-			MCU="esp32s3"
-		fi
-	done
-
-	if [ "$MCU" != "esp32s3" ]; then
-		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			OTAFILE=bleota.bin
-		else
-			OTAFILE=bleota-c3.bin
-		fi
-	else
-		OTAFILE=bleota-s3.bin
-	fi
-
-	# Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
-	if [ "$WEB_APP" = true ]; then
-		SPIFFSFILE=littlefswebui-${BASENAME}
-	else
-		SPIFFSFILE=littlefs-${BASENAME}
-	fi
-
-	if [[ ! -f $FILENAME ]]; then
-		echo "Error: file ${FILENAME} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $OTAFILE ]]; then
-		echo "Error: file ${OTAFILE} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $SPIFFSFILE ]]; then
-		echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
-		exit 1
-	fi
-
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	$ESPTOOL_CMD erase_flash
 	$ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
-	echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-	$ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
-	echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-	$ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
+	# Account for S3 board's different OTA partition
+	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
+		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
+		else
+			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
+		fi
+	else
+		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
+	fi
+	if [ "$WEB_APP" = true ]; then
+		$ESPTOOL_CMD write_flash 0x300000 littlefswebui-*.bin
+	else
+		$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
+	fi
 
 else
 	show_help

bin/device-install_test.ps1

@@ -1,112 +0,0 @@
-<#
-    .SYNOPSIS
-    Unit-test for .\device-install.bat.
-
-    .DESCRIPTION
-    This script performs a positive unit-test on .\device-install.bat by creating the expected .bin
-    files for a device followed by running the .bat script without flashing the firmware (--debug).
-    If any errors are hit they are presented in the standard output. Investigate accordingly.
-
-    This script needs to be placed in the same directory as .\device-install.bat.
-
-    .EXAMPLE
-    .\device-install_test.ps1
-
-    .EXAMPLE
-    .\device-install_test.ps1 -Verbose
-
-    .LINK
-    .\device-install.bat --help
-#>
-
-[CmdletBinding()]
-param()
-
-function New-EmptyFile() {
-    [CmdletBinding()]
-    param (
-        [Parameter(Position = 0, Mandatory = $true)]
-        # Specifies the file name.
-        [string]$FileName,
-        [Parameter(Position = 1)]
-        # Specifies the target path. (Get-Location).Path is the default.
-        [string]$Directory = (Get-Location).Path
-    )
-
-    $filePath = Join-Path -Path $Directory -ChildPath $FileName
-
-    Write-Verbose -Message "Create empty test file if it doesn't exist: $($FileName)"
-    New-Item -Path "$filePath" -ItemType File -ErrorAction SilentlyContinue | Out-Null
-}
-
-function Remove-EmptyFile() {
-    [CmdletBinding()]
-    param (
-        [Parameter(Position = 0, Mandatory = $true)]
-        # Specifies the file name.
-        [string]$FileName,
-        [Parameter(Position = 1)]
-        # Specifies the target path. (Get-Location).Path is the default.
-        [string]$Directory = (Get-Location).Path
-    )
-
-    $filePath = Join-Path -Path $Directory -ChildPath $FileName
-
-    Write-Verbose -Message "Deleted empty test file: $($FileName)"
-    Remove-Item -Path "$filePath" | Out-Null
-}
-
-
-$TestCases = New-Object -TypeName PSObject -Property @{
-    # Use this PSObject to define testcases according to this syntax:
-    # "testname" = @("firmware-testname","bleota","littlefs-testname","args")
-    "t-deck"                       = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-2.6.0.0b106d4.bin", "")
-    "t-deck_web"                   = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-t-deck-2.6.0.0b106d4.bin", "--web")
-    "t-deck-tft"                   = @("firmware-t-deck-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-tft-2.6.0.0b106d4.bin", "")
-    "heltec-ht62-esp32c3"          = @("firmware-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "bleota-c3.bin", "littlefs-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "")
-    "tlora-c6"                     = @("firmware-tlora-c6-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-tlora-c6-2.6.0.0b106d4.bin", "")
-    "heltec-v3_web"                = @("firmware-heltec-v3-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-heltec-v3-2.6.0.0b106d4.bin", "--web")
-    "seeed-sensecap-indicator-tft" = @("firmware-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "")
-    "picomputer-s3-tft"            = @("firmware-picomputer-s3-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-picomputer-s3-tft-2.6.0.0b106d4.bin", "")
-}
-
-foreach ($TestCase in $TestCases.PSObject.Properties) {
-    $Name = $TestCase.Name
-    $Files = $TestCase.Value
-    $Errors = $null
-    $Counter = 0
-
-    Write-Host -Object "Testcase: $Name`:" -ForegroundColor Green
-    foreach ($File in $Files) {
-        if ($File.EndsWith(".bin")) {
-            New-EmptyFile -FileName $File
-        }
-    }
-
-    Write-Host -Object "Performing test on $Name..." -ForegroundColor Blue
-    $Test = Invoke-Expression -Command "cmd /c .\device-install.bat --debug -f $($TestCases."$Name"[0]) $($TestCases."$Name"[3])"
-
-    foreach ($Line in $Test) {
-        if ($Line -match "Set OTA_OFFSET to" -or `
-                $Line -match "Set SPIFFS_OFFSET to") {
-            Write-Host -Object "$($Line -replace "^.*?Set","Set")" -ForegroundColor Blue
-        }
-        elseif ($VerbosePreference -eq "Continue") {
-            Write-Host -Object $Line
-        }
-        if ($Line -match "ERROR") {
-            $Errors += $Line
-            $Counter++
-        }
-    }
-    if ($null -ne $Errors) {
-        Write-Host -Object "$Counter ERROR(s) detected!" -ForegroundColor Red
-        if (-not ($VerbosePreference -eq "Continue")) { Write-Host -Object $Errors }
-    }
-
-    foreach ($File in $Files) {
-        if ($File.EndsWith(".bin")) {
-            Remove-EmptyFile -FileName $File
-        }
-    }
-}

bin/device-update.bat

@@ -1,176 +1,48 @@
 @ECHO OFF
-SETLOCAL EnableDelayedExpansion
-TITLE Meshtastic device-update
 
-SET "SCRIPT_NAME=%~nx0"
-SET "DEBUG=0"
-SET "PYTHON="
-SET "ESPTOOL_BAUD=115200"
-SET "ESPTOOL_CMD="
-SET "LOGCOUNTER=0"
+set PYTHON=python
 
-GOTO getopts
-:help
-ECHO Flash image file to device, but leave existing system intact.
-ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python]
-ECHO.
-ECHO Options:
-ECHO     -f filename      The update .bin file to flash.  Custom to your device type and region. (required)
-ECHO                      The file must be located in this current directory.
-ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
-ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
-ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
-ECHO                      If supplied the script will use python.
-ECHO                      If not supplied the script will try to find esptool in Path.
-ECHO.
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
-GOTO eof
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
 
-:version
-ECHO %SCRIPT_NAME% [Version 2.6.1]
-ECHO Meshtastic
-GOTO eof
+goto GETOPTS
+:HELP
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Flash image file to device, leave existing system intact.
+echo.
+echo     -h               Display this help and exit
+echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
+echo     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
+goto EOF
 
-:getopts
-IF "%~1"=="" GOTO endopts
-IF /I "%~1"=="-?" GOTO help
-IF /I "%~1"=="-h" GOTO help
-IF /I "%~1"=="--help" GOTO help
-IF /I "%~1"=="-v" GOTO version
-IF /I "%~1"=="--version" GOTO version
-IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
-IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
-IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
-IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+:GETOPTS
+if /I "%1"=="-h" goto HELP
+if /I "%1"=="--help" goto HELP
+if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
+if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
+if /I "%1"=="-P" set PYTHON=%2 & SHIFT
 SHIFT
-GOTO getopts
-:endopts
+IF NOT "__%1__"=="____" goto GETOPTS
 
-CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
-IF "__!FILENAME!__"=="____" (
-    CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
-    GOTO help
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
-    IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
-        GOTO help
-    )
-    @REM Remove ".\" or "./" file prefix if present.
-    SET "FILENAME=!FILENAME:.\=!"
-    SET "FILENAME=!FILENAME:./=!"
+IF "__%FILENAME%__" == "____" (
+    echo "Missing FILENAME"
+    goto HELP
+)
+IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
+    echo Trying to flash update %FILENAME%
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
+) else (
+    echo "Invalid file: %FILENAME%"
+    goto HELP
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
-IF NOT EXIST !FILENAME! (
-    CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
-    GOTO eof
-)
-
-IF "!FILENAME:update=!"=="!FILENAME!" (
-    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
-    CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
-    GOTO eof
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
-IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
-    CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
-) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
-    WHERE esptool >nul 2>&1
-    IF %ERRORLEVEL% EQU 0 (
-        @REM WHERE exits with code 0 if esptool is found.
-        SET "ESPTOOL_CMD=esptool"
-    ) ELSE (
-        SET "ESPTOOL_CMD=python -m esptool"
-        CALL :RESET_ERROR
-    )
-)
-
-CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
-!ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
-    CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
-    EXIT /B 1
-    GOTO eof
-)
-IF %DEBUG% EQU 1 (
-    CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
-    SET "ESPTOOL_CMD=REM !ESPTOOL_CMD!"
-)
-
-CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
-IF "__!ESPTOOL_PORT!__" == "____" (
-    CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
-) ELSE (
-    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
-    CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
-)
-CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
-
-@REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
-
-CALL :LOG_MESSAGE INFO "Script complete!."
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
-
-
-:RUN_ESPTOOL
-@REM Subroutine used to run ESPTOOL_CMD with arguments.
-@REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
-@REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
-IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-CALL :RESET_ERROR
-!ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
-IF %ERRORLEVEL% NEQ 0 (
-    CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
-    EXIT /B %ERRORLEVEL%
-)
-GOTO :eof
-
-:LOG_MESSAGE
-@REM Subroutine used to print log messages in four different levels.
-@REM DEBUG messages only get printed if [-d] flag is passed to script.
-@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
-@REM.
-@REM Example:: CALL :LOG_MESSAGE INFO "Message."
-SET /A LOGCOUNTER=LOGCOUNTER+1
-IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-GOTO :eof
-
-:GET_TIMESTAMP
-@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
-@REM CALL :GET_TIMESTAMP
-@REM.
-@REM Updates: !TIMESTAMP!
-FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
-    SET "HH=%%a"
-    SET "MM=%%b"
-    SET "ss=%%c"
-)
-SET "TIMESTAMP=!HH!:!MM!:!ss!"
-GOTO :eof
-
-:RESET_ERROR
-@REM Subroutine to reset %ERRORLEVEL% to 0.
-@REM CALL :RESET_ERROR
-@REM.
-@REM Updates: %ERRORLEVEL%
-EXIT /B 0
-GOTO :eof
+:EOF

bin/device-update.sh

@@ -35,8 +35,8 @@ while getopts ":hp:P:f:" opt; do
             show_help
             exit 0
             ;;
-        p)  ESPTOOL_CMD="$ESPTOOL_CMD --port ${OPTARG}"
-	        ;;
+        p)  export ESPTOOL_PORT=${OPTARG}
+	    ;;
         P)  PYTHON=${OPTARG}
             ;;
         f)  FILENAME=${OPTARG}

bin/generate_ci_matrix.py

@@ -35,11 +35,6 @@ for subdir, dirs, files in os.walk(rootdir):
                                     outlist.append(section)
                             else:
                                 outlist.append(section)
-                        # Add the TFT variants if the base variant is selected
-                        elif section.replace("-tft", "") in outlist and config[config[c].name].get("board_level") != "extra":
-                            outlist.append(section)
-                        elif section.replace("-inkhud", "") in outlist and config[config[c].name].get("board_level") != "extra":
-                            outlist.append(section)
                     if "board_check" in config[config[c].name]:
                         if (config[config[c].name]["board_check"] == "true") & (
                             "check" in options
@@ -48,4 +43,4 @@ for subdir, dirs, files in os.walk(rootdir):
 if ("quick" in options) & (len(outlist) > 3):
     print(json.dumps(random.sample(outlist, 3)))
 else:
-    print(json.dumps(outlist))
+    print(json.dumps(outlist))

bin/meshtasticd.service

@@ -5,11 +5,10 @@ StartLimitInterval=200
 StartLimitBurst=5
 
 [Service]
-AmbientCapabilities=CAP_NET_BIND_SERVICE
-User=meshtasticd
-Group=meshtasticd
+User=root
+Group=root
 Type=simple
-ExecStart=/usr/bin/meshtasticd
+ExecStart=/usr/sbin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
+cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.desktop

@@ -1,8 +0,0 @@
-[Desktop Entry]
-Name=Meshtastic
-Comment=Meshtastic App
-Exec=meshtasticd
-Icon=org.meshtastic.meshtasticd
-Terminal=true
-Type=Application
-Categories=Network;Chat;HamRadio;

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -1,112 +0,0 @@
-<?xml version='1.0' encoding='UTF-8'?>
-<component type="desktop-application">
-  <id>org.meshtastic.meshtasticd</id>
-
-  <name>Meshtastic</name>
-  <summary>Decentralized mesh communication</summary>
-
-  <metadata_license>CC-BY-4.0</metadata_license>
-  <project_license>GPL-3.0-or-later</project_license>
-
-  <developer id="org.meshtastic">
-    <name>Meshtastic</name>
-  </developer>
-
-  <description>
-    <p>
-      Meshtastic is an open source project for creating off-grid, affordable, and resilient communication with LoRa mesh networks.
-    </p>
-  </description>
-
-  <launchable type="desktop-id">org.meshtastic.meshtasticd.desktop</launchable>
-
-  <categories>
-    <category>Network</category>
-    <category>Chat</category>
-    <category>HamRadio</category>
-  </categories>
-  <keywords>
-    <keyword>mesh</keyword>
-    <keyword>LoRa</keyword>
-  </keywords>
-
-  <recommends>
-    <control>keyboard</control>
-    <control>pointing</control>
-    <control>touch</control>
-  </recommends>
-  <requires>
-    <display_length compare="ge">360</display_length>
-  </requires>
-
-  <branding>
-    <color type="primary" scheme_preference="light">#97be89</color>
-    <color type="primary" scheme_preference="dark">#206538</color>
-  </branding>
-
-  <content_rating type="oars-1.1">
-    <content_attribute id="social-chat">intense</content_attribute>
-    <content_attribute id="social-location">intense</content_attribute>
-  </content_rating>
-
-  <url type="bugtracker">https://github.com/meshtastic/firmware/issues</url>
-  <url type="homepage">https://meshtastic.org/</url>
-  <url type="donation">https://opencollective.com/meshtastic</url>
-  <url type="faq">https://meshtastic.org/docs/software/linux/usage/</url>
-  <url type="vcs-browser">https://github.com/meshtastic/firmware/</url>
-
-  <screenshots>
-    <screenshot type="default">
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_home_dashboard_dark.webp</image>
-      <caption>Home Dashboard</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_initial_boot.webp</image>
-      <caption>Setup</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_node_list_dark.webp</image>
-      <caption>Nodes List</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_list_dark.webp</image>
-      <caption>Chats List</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_message_dark.webp</image>
-      <caption>Messages</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_map_dark.webp</image>
-      <caption>Map</caption>
-    </screenshot>
-    <screenshot>
-      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_settings_dark.webp</image>
-      <caption>Settings</caption>
-    </screenshot>
-  </screenshots>
-
-  <releases>
-    <release version="2.6.10" date="2025-05-25">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.10</url>
-    </release>
-    <release version="2.6.9" date="2025-05-15">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.9</url>
-    </release>
-    <release version="2.6.8" date="2025-05-05">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.8</url>
-    </release>
-    <release version="2.6.7" date="2025-04-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.7</url>
-    </release>
-    <release version="2.6.6" date="2025-04-15">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.6</url>
-    </release>
-    <release version="2.6.5" date="2025-03-30">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.5</url>
-    </release>
-    <release version="2.6.4" date="2025-03-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.4</url>
-    </release>
-  </releases>
-</component>

bin/org.meshtastic.meshtasticd.svg

@@ -1,16 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
-<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
-<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" width="512" height="512" viewBox="0 0 512 512" xml:space="preserve">
-<desc>Created with Fabric.js 4.6.0</desc>
-<defs>
-</defs>
-<g transform="matrix(1 0 0 1 256 256)" id="xYQ9Gk9Jwpgj_HMOXB3F_"  >
-<path style="stroke: rgb(213,130,139); stroke-width: 0; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: miter; stroke-miterlimit: 4; fill: rgb(103,234,148); fill-rule: nonzero; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-256, -256)" d="M 0 0 L 512 0 L 512 512 L 0 512 z" stroke-linecap="round" />
-</g>
-<g transform="matrix(1.79 0 0 1.79 313.74 258.36)" id="1xBsk2n9FZp60Rz1O-ceJ"  >
-<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-250.97, -362.41)" d="M 250.908 330.267 L 193.126 415.005 L 180.938 406.694 L 244.802 313.037 C 246.174 311.024 248.453 309.819 250.889 309.816 C 253.326 309.814 255.606 311.015 256.982 313.026 L 320.994 406.536 L 308.821 414.869 L 250.908 330.267 Z" stroke-linecap="round" />
-</g>
-<g transform="matrix(1.81 0 0 1.81 145 256.15)" id="KxN7E9YpbyPgz0S4z4Cl6"  >
-<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-115.14, -528.06)" d="M 87.642 581.398 L 154.757 482.977 L 142.638 474.713 L 75.523 573.134 L 87.642 581.398 Z" stroke-linecap="round" />
-</g>
-</svg>

bin/platformio-custom.py

@@ -83,7 +83,7 @@ if platform.name == "espressif32":
 
 if platform.name == "nordicnrf52":
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
                                         "Generating UF2 file"))
 
 Import("projenv")
@@ -125,9 +125,4 @@ for flag in flags:
     
 projenv.Append(
     CCFLAGS=flags,
-)
-
-for lb in env.GetLibBuilders():
-    if lb.name == "meshtastic-device-ui":
-        lb.env.Append(CPPDEFINES=[("APP_VERSION", verObj["long"])])
-        break
+)

bin/regen-protos.bat

@@ -1,10 +1 @@
-@ECHO OFF
-SETLOCAL
-
-cd protobufs
-..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
-GOTO eof
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
+cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/rpkg.macros

@@ -2,10 +2,6 @@ function meshtastic_version {
     meshtastic_version=$(python3 bin/buildinfo.py short)
     echo -n "$meshtastic_version"
 }
-function web_version {
-    web_version=$(cat bin/web.version)
-    echo -n "$web_version"
-}
 function git_commits_num {
     total_commits=$(git rev-list --all --count)
     echo -n "$total_commits"

bin/uf2-convert.bat

@@ -1,124 +1,2 @@
-@ECHO OFF
-SETLOCAL EnableDelayedExpansion
-TITLE Meshtastic uf2-convert
-
-SET "SCRIPT_NAME=%~nx0"
-SET "DEBUG=0"
-SET "NRF=0"
-SET "UF2CONV_CMD=python3 .\bin\uf2conv.py"
-
-GOTO getopts
-:help
-ECHO.
-ECHO Usage: %SCRIPT_NAME% -t [t-echo^|rak4631^|nano-g2-ultra^|wio-tracker-wm1110^|canaryone^|
-ECHO                                 heltec-mesh-node-t114^|tracker-t1000-e^|rak_wismeshtap^|rak2560^|
-ECHO                                 nrf52_promicro_diy_tcxo]
-ECHO.
-ECHO Options:
-ECHO     -t target        Specify a platformio NRF target to build for. (required)
-ECHO.
-ECHO Example: %SCRIPT_NAME% -t rak4631
-GOTO eof
-
-:version
-ECHO %SCRIPT_NAME% [Version 2.6.0]
-ECHO Meshtastic
-GOTO eof
-
-:getopts
-IF "%~1"=="" GOTO endopts
-IF /I "%~1"=="-?" GOTO help
-IF /I "%~1"=="-h" GOTO help
-IF /I "%~1"=="--help" GOTO help
-IF /I "%~1"=="-v" GOTO version
-IF /I "%~1"=="--version" GOTO version
-IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
-IF /I "%~1"=="-t" SET "TARGETNAME=%~2" & SHIFT
-IF /I "%~1"=="--target" SET "TARGETNAME=%~2" & SHIFT
-SHIFT
-GOTO getopts
-:endopts
-
-CALL :LOG_MESSAGE DEBUG "Checking TARGETNAME parameter..."
-IF "__!TARGETNAME!__"=="____" (
-    CALL :LOG_MESSAGE DEBUG "Missing -t target input."
-    GOTO help
-)
-
-IF %DEBUG% EQU 1 SET "UF2CONV_CMD=REM python3 .\bin\uf2conv.py"
-
-SET "NRFTARGETS=t-echo rak4631 nano-g2-ultra wio-tracker-wm1110 canaryone heltec-mesh-node-t114 tracker-t1000-e rak_wismeshtap rak2560 nrf52_promicro_diy_tcxo"
-FOR %%a IN (%NRFTARGETS%) DO (
-    IF /I "%%a"=="!TARGETNAME!" (
-        @REM We are working with any of %NRFTARGETS%.
-        SET "NRF=1"
-        GOTO end_loop_nrf
-    )
-)
-:end_loop_nrf
-
-@REM Building operations.
-IF !NRF! EQU 1 (
-    CALL :LOG_MESSAGE INFO "Trying to build for !TARGETNAME!..."
-    CALL :RUN_UF2CONV !TARGETNAME! || GOTO eof
-) ELSE (
-    CALL :LOG_MESSAGE WARN "!TARGETNAME! is not supported..."
-    GOTO eof
-)
-
-CALL :LOG_MESSAGE INFO "Script complete!."
-
-
-:eof
-ENDLOCAL
-EXIT /B %ERRORLEVEL%
-
-
-:RUN_UF2CONV
-@REM Subroutine used to run .\bin\uf2conv.py with arguments.
-@REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_UF2CONV [target]
-@REM.
-@REM Example:: CALL :RUN_UF2CONV rak4631
-IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840"
-CALL :RESET_ERROR
-!UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840
-IF %ERRORLEVEL% NEQ 0 (
-    CALL :LOG_MESSAGE ERROR "Error running command: !UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840"
-    EXIT /B %ERRORLEVEL%
-)
-GOTO :eof
-
-:LOG_MESSAGE
-@REM Subroutine used to print log messages in four different levels.
-@REM DEBUG messages only get printed if [-d] flag is passed to script.
-@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
-@REM.
-@REM Example:: CALL :LOG_MESSAGE INFO "Message."
-SET /A LOGCOUNTER=LOGCOUNTER+1
-IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
-IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
-GOTO :eof
-
-:GET_TIMESTAMP
-@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
-@REM CALL :GET_TIMESTAMP
-@REM.
-@REM Updates: !TIMESTAMP!
-FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
-    SET "HH=%%a"
-    SET "MM=%%b"
-    SET "ss=%%c"
-)
-SET "TIMESTAMP=!HH!:!MM!:!ss!"
-GOTO :eof
-
-:RESET_ERROR
-@REM Subroutine to reset %ERRORLEVEL% to 0.
-@REM CALL :RESET_ERROR
-@REM.
-@REM Updates: %ERRORLEVEL%
-EXIT /B 0
-GOTO :eof
+@echo off
+if [%1]==[] (echo "Please specify a platformio NRF target (i.e. rak4631) as the first argument.") else (python3 .\bin\uf2conv.py .\.pio\build\%1\firmware.hex -c -o .\.pio\build\%1\firmware.uf2 -f 0xADA52840)

bin/web.version

@@ -1 +0,0 @@
-2.5.3

boards/ThinkNode-M1.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_eink",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M1",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "elecrow eink",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "FIXME",
-  "vendor": "ELECROW"
-}

boards/crowpanel.json

@@ -1,43 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "ESP32-S3-WROOM-1-N16R8"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "ESP32-S3-WROOM-1-N16R8 (16 MB Flash, 8 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 524288,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "monitor": {
-    "speed": 115200
-  },
-  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
-  "vendor": "Espressif"
-}

boards/esp32-s3-pico.json

@@ -7,15 +7,13 @@
     "core": "esp32",
     "extra_flags": [
       "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DBOARD_HAS_PSRAM"
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "qio",
     "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/heltec_mesh_pocket.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "HT-n5262",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_pocket",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/project/meshpocket/",
-  "vendor": "Heltec"
-}

boards/heltec_vision_master_e213.json

@@ -2,8 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [
@@ -16,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_e290.json

@@ -2,8 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [
@@ -16,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_t190.json

@@ -2,8 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [
@@ -16,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/seeed-sensecap-indicator.json

@@ -18,7 +18,6 @@
     "f_boot": "120000000L",
     "boot": "qio",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [["0x1A86", "0x7523"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/seeed-xiao-s3.json

@@ -15,7 +15,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [["0x2886", "0x0059"]],
     "mcu": "esp32s3",
     "variant": "seeed-xiao-s3"

boards/seeed_solar_node.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x2886", "0x0059"]],
-    "usb_product": "XIAO-BOOT",
-    "mcu": "nrf52840",
-    "variant": "seeed_solar_node",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "seeed_solar_node",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
-  "vendor": "Seeed Studio"
-}

boards/seeed_wio_tracker_L1.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x2886", "0x1668"]],
-    "usb_product": "TRACKER L1",
-    "mcu": "nrf52840",
-    "variant": "seeed_wio_tracker_L1",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "seeed_wio_tracker_L1",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.seeedstudio.com/Wio-Tracker-L1-p-6477.html",
-  "vendor": "Seeed Studio"
-}

boards/seeed_xiao_nrf52840_kit.json

@@ -1,56 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x2886", "0x0166"]
-    ],
-    "usb_product": "XIAO-BOOT",
-    "mcu": "nrf52840",
-    "variant": "seeed_xiao_nrf52840_kit",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "seeed_xiao_nrf52840_kit",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html",
-  "vendor": "seeed"
-}

boards/t-watch-s3.json

@@ -16,7 +16,6 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]
@@ -24,16 +23,16 @@
     "mcu": "esp32s3",
     "variant": "t-watch-s3"
   },
-  "connectivity": ["wifi", "bluetooth", "lora"],
+  "connectivity": ["wifi"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },
   "frameworks": ["arduino"],
   "name": "LilyGo T-Watch 2020 V3",
   "upload": {
-    "flash_size": "16MB",
+    "flash_size": "8MB",
     "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
+    "maximum_size": 8388608,
     "require_upload_port": true,
     "use_1200bps_touch": true,
     "wait_for_upload_port": true,

boards/wiscore_rak11300.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "earlephilhower": {
+        "boot2_source": "boot2_w25q080_2_padded_checksum.S",
+        "usb_vid": "0x2E8A",
+        "usb_pid": "0x000A"
+      }
+    },
+    "core": "earlephilhower",
+    "cpu": "cortex-m0plus",
+    "extra_flags": "-DARDUINO_GENERIC_RP2040 -DRASPBERRY_PI_PICO -DARDUINO_ARCH_RP2040 -DUSBD_MAX_POWER_MA=250",
+    "f_cpu": "133000000L",
+    "hwids": [
+      ["0x2E8A", "0x00C0"],
+      ["0x2E8A", "0x000A"]
+    ],
+    "mcu": "rp2040",
+    "variant": "WisBlock_RAK11300_Board"
+  },
+  "debug": {
+    "jlink_device": "RP2040_M0_0",
+    "openocd_target": "rp2040.cfg",
+    "svd_path": "rp2040.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "WisBlock RAK11300",
+  "upload": {
+    "maximum_ram_size": 270336,
+    "maximum_size": 2097152,
+    "require_upload_port": true,
+    "native_usb": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": false,
+    "protocol": "picotool",
+    "protocols": ["cmsis-dap", "raspberrypi-swd", "picotool", "picoprobe"]
+  },
+  "url": "https://docs.rakwireless.com/",
+  "vendor": "RAKwireless"
+}

debian/changelog

@@ -1,19 +1,9 @@
-meshtasticd (2.6.10.0) UNRELEASED; urgency=medium
+meshtasticd (2.5.22.0) UNRELEASED; urgency=medium
 
-  [ Austin Lane ]
   * Initial packaging
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
- --  <github-actions[bot]@users.noreply.github.com>  Sun, 25 May 2025 20:46:49 +0000
+ -- Austin Lane <github-actions[bot]@users.noreply.github.com>  Wed, 05 Feb 2025 01:10:33 +0000

debian/ci_pack_sdeb.sh

@@ -5,14 +5,13 @@ export PLATFORMIO_PACKAGES_DIR=pio/packages
 export PLATFORMIO_CORE_DIR=pio/core
 
 # Download libraries to `pio`
-platformio pkg install -e native-tft
-platformio pkg install -e native-tft -t platformio/tool-scons@4.40502.0
+platformio pkg install -e native
+platformio pkg install -e native -t platformio/tool-scons@4.40502.0
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
-# Download the meshtastic/web release build.tar to `web.tar`
-web_ver=$(cat bin/web.version)
-curl -L "https://github.com/meshtastic/web/releases/download/v$web_ver/build.tar" -o web.tar
+# Download the latest meshtastic/web release build.tar to `web.tar`
+curl -L https://github.com/meshtastic/web/releases/latest/download/build.tar -o web.tar
 
 package=$(dpkg-parsechangelog --show-field Source)
 

debian/control

@@ -3,7 +3,6 @@ Section: misc
 Priority: optional
 Maintainer: Austin Lane <vidplace7@gmail.com>
 Build-Depends: debhelper-compat (= 13),
-               lsb-release,
                tar,
                gzip,
                platformio,
@@ -17,23 +16,17 @@ Build-Depends: debhelper-compat (= 13),
                libbluetooth-dev,
                libusb-1.0-0-dev,
                libi2c-dev,
-               libuv1-dev,
                openssl,
                libssl-dev,
                libulfius-dev,
-               liborcania-dev,
-               libx11-dev,
-               libinput-dev,
-               libxkbcommon-x11-dev
+               liborcania-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no
 
 Package: meshtasticd
 Architecture: any
-Depends: adduser,
-         ${misc:Depends},
-         ${shlibs:Depends}
+Depends: ${misc:Depends}, ${shlibs:Depends}
 Description: Meshtastic daemon for communicating with Meshtastic devices
  Meshtastic is an off-grid text communication platform that uses inexpensive 
- LoRa radios.
+ LoRa radios.

debian/meshtasticd.dirs

@@ -1,6 +1,5 @@
-var/lib/meshtasticd
 etc/meshtasticd
 etc/meshtasticd/config.d
 etc/meshtasticd/available.d
 usr/share/meshtasticd/web
-etc/meshtasticd/ssl
+etc/meshtasticd/ssl