Merge pull request #1950 from code8buster/1.2-legacy

1.2-legacy version pinning

.clusterfuzzlite/Dockerfile

@@ -1,52 +0,0 @@
-# This container is used to build Meshtastic with the libraries required by the fuzzer.
-# ClusterFuzzLite starts the container, runs the build.sh script, and then exits.
-
-# As this is not a long running service, health-checks are not required. ClusterFuzzLite
-# also only works if the user remains unchanged from the base image (it expects to run
-# as root).
-# trunk-ignore-all(trivy/DS026): No healthcheck is needed for this builder container
-# trunk-ignore-all(checkov/CKV_DOCKER_2): No healthcheck is needed for this builder container
-# trunk-ignore-all(checkov/CKV_DOCKER_3): We must run as root for this container
-# trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
-
-FROM gcr.io/oss-fuzz-base/base-builder:v1
-
-ENV PIP_ROOT_USER_ACTION=ignore
-
-# trunk-ignore(hadolint/DL3008): apt packages are not pinned.
-# trunk-ignore(terrascan/AC_DOCKER_0002): apt packages are not pinned.
-RUN apt-get update && apt-get install --no-install-recommends -y \
-        cmake git zip libgpiod-dev libbluetooth-dev libi2c-dev \
-        libunistring-dev libmicrohttpd-dev libgnutls28-dev libgcrypt20-dev \
-        libusb-1.0-0-dev libssl-dev pkg-config && \
-    apt-get clean && rm -rf /var/lib/apt/lists/* && \
-    pip install --no-cache-dir -U \
-        platformio==6.1.16 \
-        grpcio-tools==1.68.1 \
-        meshtastic==2.5.9
-
-# Ugly hack to avoid clang detecting a conflict between the math "log" function and the "log" function in framework-portduino/cores/portduino/logging.h
-RUN sed -i -e 's/__MATHCALL_VEC (log,, (_Mdouble_ __x));//' /usr/include/x86_64-linux-gnu/bits/mathcalls.h
-
-# A few dependencies are too old on the base-builder image. More recent versions are built from source.
-WORKDIR $SRC
-RUN git config --global advice.detachedHead false && \
-    git clone --depth 1 --branch 0.8.0 https://github.com/jbeder/yaml-cpp.git && \
-    git clone --depth 1 --branch v2.3.3 https://github.com/babelouest/orcania.git && \
-    git clone --depth 1 --branch v1.4.20 https://github.com/babelouest/yder.git && \
-    git clone --depth 1 --branch v2.7.15 https://github.com/babelouest/ulfius.git
-
-COPY ./.clusterfuzzlite/build.sh $SRC/
-
-WORKDIR $SRC/firmware
-COPY . $SRC/firmware/
-
-# https://docs.platformio.org/en/latest/envvars.html
-ENV PLATFORMIO_CORE_DIR=$SRC/pio/core \
-    PLATFORMIO_LIBDEPS_DIR=$SRC/pio/libdeps \
-    PLATFORMIO_PACKAGES_DIR=$SRC/pio/packages \
-    PLATFORMIO_SETTING_ENABLE_CACHE=No \
-    PIO_ENV=buildroot
-RUN platformio pkg install --environment $PIO_ENV

.clusterfuzzlite/README.md

@@ -1,59 +0,0 @@
-# ClusterFuzzLite for Meshtastic
-
-This directory contains the fuzzer implementation for Meshtastic using the ClusterFuzzLite framework.
-See the [ClusterFuzzLite documentation](https://google.github.io/clusterfuzzlite/) for more details.
-
-## Running locally
-
-ClusterFuzzLite uses the OSS-Fuzz toolchain. To build the fuzzer manually, first grab a copy of OSS-Fuzz.
-
-```shell
-git clone https://github.com/google/oss-fuzz.git
-cd oss-fuzz
-```
-
-To build the fuzzer, run:
-
-```shell
-python3 infra/helper.py build_image --external $PATH_TO_MESHTASTIC_FIRMWARE_DIRECTORY
-python3 infra/helper.py build_fuzzers --external $PATH_TO_MESHTASTIC_FIRMWARE_DIRECTORY --sanitizer address
-```
-
-To run the fuzzer, run:
-
-```shell
-python3 infra/helper.py run_fuzzer --external --corpus-dir=<path-to-temp-corpus-dir> $PATH_TO_MESHTASTIC_FIRMWARE_DIRECTORY router_fuzzer
-```
-
-More background on these commands can be found in the
-[ClusterFuzzLite documentation](https://google.github.io/clusterfuzzlite/build-integration/#testing-locally).
-
-## router_fuzzer.cpp
-
-This fuzzer submits MeshPacket protos to the `Router::enqueueReceivedMessage` method. It takes the binary
-data from the fuzzer and decodes that data to a MeshPacket using nanopb. A few fields in
-the MeshPacket are modified by the fuzzer.
-
-- If the `to` field is 0, it will be replaced with the NodeID of the running node.
-- If the `from` field is 0, it will be replaced with the NodeID of the running node.
-- If the `id` field is 0, it will be replaced with an incrementing counter value.
-- If the `pki_encrypted` field is true, the `public_key` field will be populated with the first admin key.
-
-The `router_fuzzer_seed_corpus.py` file contains a list of MeshPackets. It is run from inside build.sh and
-writes the binary MeshPacket protos to files. These files are use used by the fuzzer as its initial seed data,
-helping the fuzzer to start off with a few known inputs.
-
-### Interpreting a fuzzer crash
-
-If the fuzzer crashes, it'll write the input bytes used for the test case to a file and notify about the
-location of that file. The contents of the file are a binary serialized MeshPacket protobuf. The following
-snippet of Python code can be used to parse the file into a human readable form.
-
-```python
-from meshtastic.protobuf import mesh_pb2
-
-mesh_pb2.MeshPacket.FromString(open("crash-XXXX-file", "rb").read())
-```
-
-Consider adding any such crash results to the `router_fuzzer_seed_corpus.py` file to ensure there a isn't
-a future regression for that crash test case.

.clusterfuzzlite/build.sh

@@ -1,71 +0,0 @@
-#!/bin/bash -eu
-
-# Build Meshtastic and a few needed dependencies using clang++
-# and the OSS-Fuzz required build flags.
-
-env
-
-cd "$SRC"
-NPROC=$(nproc || echo 1)
-
-LDFLAGS=-lpthread cmake -S "$SRC/yaml-cpp" -B "$WORK/yaml-cpp/$SANITIZER" \
-	-DBUILD_SHARED_LIBS=OFF
-cmake --build "$WORK/yaml-cpp/$SANITIZER" -j "$NPROC"
-cmake --install "$WORK/yaml-cpp/$SANITIZER" --prefix /usr
-
-cmake -S "$SRC/orcania" -B "$WORK/orcania/$SANITIZER" \
-	-DBUILD_STATIC=ON
-cmake --build "$WORK/orcania/$SANITIZER" -j "$NPROC"
-cmake --install "$WORK/orcania/$SANITIZER" --prefix /usr
-
-cmake -S "$SRC/yder" -B "$WORK/yder/$SANITIZER" \
-	-DBUILD_STATIC=ON -DWITH_JOURNALD=OFF
-cmake --build "$WORK/yder/$SANITIZER" -j "$NPROC"
-cmake --install "$WORK/yder/$SANITIZER" --prefix /usr
-
-cmake -S "$SRC/ulfius" -B "$WORK/ulfius/$SANITIZER" \
-	-DBUILD_STATIC=ON -DWITH_JANSSON=OFF -DWITH_CURL=OFF -DWITH_WEBSOCKET=OFF
-cmake --build "$WORK/ulfius/$SANITIZER" -j "$NPROC"
-cmake --install "$WORK/ulfius/$SANITIZER" --prefix /usr
-
-cd "$SRC/firmware"
-
-PLATFORMIO_EXTRA_SCRIPTS=$(echo -e "pre:.clusterfuzzlite/platformio-clusterfuzzlite-pre.py\npost:.clusterfuzzlite/platformio-clusterfuzzlite-post.py")
-STATIC_LIBS=$(pkg-config --libs --static libulfius openssl libgpiod yaml-cpp bluez --silence-errors)
-export PLATFORMIO_EXTRA_SCRIPTS
-export STATIC_LIBS
-export PLATFORMIO_WORKSPACE_DIR="$WORK/pio/$SANITIZER"
-export TARGET_CC=$CC
-export TARGET_CXX=$CXX
-export TARGET_LD=$CXX
-export TARGET_AR=llvm-ar
-export TARGET_AS=llvm-as
-export TARGET_OBJCOPY=llvm-objcopy
-export TARGET_RANLIB=llvm-ranlib
-
-mkdir -p "$OUT/lib"
-
-cp .clusterfuzzlite/*_fuzzer.options "$OUT/"
-
-for f in .clusterfuzzlite/*_fuzzer.cpp; do
-	fuzzer=$(basename "$f" .cpp)
-	cp -f "$f" src/fuzzer.cpp
-	pio run -vvv --environment "$PIO_ENV"
-	program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/program"
-	cp "$program" "$OUT/$fuzzer"
-
-	# Copy shared libraries used by the fuzzer.
-	read -d '' -ra shared_libs < <(ldd "$program" | sed -n 's/[^=]\+=> \([^ ]\+\).*/\1/p') || true
-	cp -f "${shared_libs[@]}" "$OUT/lib/"
-
-	# Build the initial fuzzer seed corpus.
-	corpus_name="${fuzzer}_seed_corpus"
-	corpus_generator="$PWD/.clusterfuzzlite/${corpus_name}.py"
-	if [[ -f $corpus_generator ]]; then
-		mkdir "$corpus_name"
-		pushd "$corpus_name"
-		python3 "$corpus_generator"
-		popd
-		zip -D "$OUT/${corpus_name}.zip" "$corpus_name"/*
-	fi
-done

.clusterfuzzlite/platformio-clusterfuzzlite-post.py

@@ -1,35 +0,0 @@
-"""PlatformIO build script (post: runs after other Meshtastic scripts)."""
-
-import os
-import shlex
-
-from SCons.Script import DefaultEnvironment
-
-env = DefaultEnvironment()
-
-# Remove any static libraries from the LIBS environment. Static libraries are
-# handled in platformio-clusterfuzzlite-pre.py.
-static_libs = set(lib[2:] for lib in shlex.split(os.getenv("STATIC_LIBS")))
-env.Replace(
-    LIBS=[
-        lib for lib in env["LIBS"] if not (isinstance(lib, str) and lib in static_libs)
-    ],
-)
-
-# FrameworkArduino/portduino/main.cpp contains the "main" function the binary.
-# The fuzzing framework also provides a "main" function and needs to be run
-# before Meshtastic is started. We rename the "main" function for Meshtastic to
-# "portduino_main" here so that it can be called inside the fuzzer.
-env.AddPostAction(
-    "$BUILD_DIR/FrameworkArduino/portduino/main.cpp.o",
-    env.VerboseAction(
-        " ".join(
-            [
-                "$OBJCOPY",
-                "--redefine-sym=main=portduino_main",
-                "$BUILD_DIR/FrameworkArduino/portduino/main.cpp.o",
-            ]
-        ),
-        "Renaming main symbol to portduino_main",
-    ),
-)

.clusterfuzzlite/platformio-clusterfuzzlite-pre.py

@@ -1,52 +0,0 @@
-"""PlatformIO build script (pre: runs before other Meshtastic scripts).
-
-ClusterFuzzLite executes in a different container from the build. During the build,
-attempt to link statically to as many dependencies as possible. For dependencies that
-do not have static libraries, the shared library files are copied to the output
-directory by the build.sh script.
-"""
-
-import glob
-import os
-import shlex
-
-from SCons.Script import DefaultEnvironment, Literal
-
-env = DefaultEnvironment()
-
-cxxflags = shlex.split(os.getenv("CXXFLAGS"))
-sanitizer_flags = shlex.split(os.getenv("SANITIZER_FLAGS"))
-lib_fuzzing_engine = shlex.split(os.getenv("LIB_FUZZING_ENGINE"))
-statics = glob.glob("/usr/lib/lib*.a") + glob.glob("/usr/lib/*/lib*.a")
-no_static = set(("-ldl",))
-
-
-def replaceStatic(lib):
-    """Replace -l<libname> with the static .a file for the library."""
-    if not lib.startswith("-l") or lib in no_static:
-        return lib
-    static_name = f"/lib{lib[2:]}.a"
-    static = [s for s in statics if s.endswith(static_name)]
-    if len(static) == 1:
-        return static[0]
-    return lib
-
-
-# Setup the environment for building with Clang and the OSS-Fuzz required build flags.
-env.Append(
-    CFLAGS=os.getenv("CFLAGS"),
-    CXXFLAGS=cxxflags,
-    LIBSOURCE_DIRS=["/usr/lib/x86_64-linux-gnu"],
-    LINKFLAGS=cxxflags
-    + sanitizer_flags
-    + lib_fuzzing_engine
-    + ["-stdlib=libc++", "-std=c++17"],
-    _LIBFLAGS=[replaceStatic(s) for s in shlex.split(os.getenv("STATIC_LIBS"))]
-    + [
-        "/usr/lib/x86_64-linux-gnu/libunistring.a",  # Needs to be at the end.
-        # Find the shared libraries in a subdirectory named lib
-        # within the same directory as the binary.
-        Literal("-Wl,-rpath,$ORIGIN/lib"),
-        "-Wl,-z,origin",
-    ],
-)

.clusterfuzzlite/project.yaml

@@ -1 +0,0 @@
-language: c++

.clusterfuzzlite/router_fuzzer.cpp

@@ -1,206 +0,0 @@
-// Fuzzer implementation that sends MeshPackets to Router::enqueueReceivedMessage.
-#include <condition_variable>
-#include <cstdlib>
-#include <mutex>
-#include <pb_decode.h>
-#include <stdexcept>
-#include <string>
-#include <thread>
-
-#include "PortduinoGPIO.h"
-#include "PortduinoGlue.h"
-#include "PowerFSM.h"
-#include "mesh/MeshTypes.h"
-#include "mesh/NodeDB.h"
-#include "mesh/Router.h"
-#include "mesh/TypeConversions.h"
-#include "mesh/mesh-pb-constants.h"
-
-namespace
-{
-constexpr uint32_t nodeId = 0x12345678;
-// Set to true when lateInitVariant finishes. Used to ensure lateInitVariant was called during startup.
-bool hasBeenConfigured = false;
-
-// These are used to block the Arduino loop() function until a fuzzer input is ready. This is
-// an optimization that prevents a sleep from happening before the loop is run. The Arduino loop
-// function calls loopCanSleep() before sleeping. loopCanSleep is implemented here in the fuzzer
-// and blocks until runLoopOnce() is called to signal for the loop to run.
-bool fuzzerRunning = false;  // Set to true once LLVMFuzzerTestOneInput has started running.
-bool loopCanRun = true;      // The main Arduino loop() can run when this is true.
-bool loopIsWaiting = false;  // The main Arduino loop() is waiting to be signaled to run.
-bool loopShouldExit = false; // Indicates that the main Arduino thread should exit by throwing ShouldExitException.
-std::mutex loopLock;
-std::condition_variable loopCV;
-std::thread meshtasticThread;
-
-// This exception is thrown when the portuino main thread should exit.
-class ShouldExitException : public std::runtime_error
-{
-  public:
-    using std::runtime_error::runtime_error;
-};
-
-// Start the loop for one test case and wait till the loop has completed. This ensures fuzz
-// test cases do not overlap with one another. This helps the fuzzer attribute a crash to the
-// single, currently running, test case.
-void runLoopOnce()
-{
-    realHardware = true; // Avoids delay(100) within portduino/main.cpp
-    std::unique_lock<std::mutex> lck(loopLock);
-    fuzzerRunning = true;
-    loopCanRun = true;
-    loopCV.notify_one();
-    loopCV.wait(lck, [] { return !loopCanRun && loopIsWaiting; });
-}
-} // namespace
-
-// Called in the main Arduino loop function to determine if the loop can delay/sleep before running again.
-// We use this as a way to block the loop from sleeping and to start the loop function immediately when a
-// fuzzer input is ready.
-bool loopCanSleep()
-{
-    std::unique_lock<std::mutex> lck(loopLock);
-    loopIsWaiting = true;
-    loopCV.notify_one();
-    loopCV.wait(lck, [] { return loopCanRun || loopShouldExit; });
-    loopIsWaiting = false;
-    if (loopShouldExit)
-        throw ShouldExitException("exit");
-    if (!fuzzerRunning)
-        return true;    // The loop can sleep before the fuzzer starts.
-    loopCanRun = false; // Only run the loop once before waiting again.
-    return false;
-}
-
-// Called just prior to starting Meshtastic. Allows for setting config values before startup.
-void lateInitVariant()
-{
-    settingsMap[logoutputlevel] = level_error;
-    channelFile.channels[0] = meshtastic_Channel{
-        .has_settings = true,
-        .settings =
-            meshtastic_ChannelSettings{
-                .psk = {.size = 1, .bytes = {/*defaultpskIndex=*/1}},
-                .name = "LongFast",
-                .uplink_enabled = true,
-                .has_module_settings = true,
-                .module_settings = {.position_precision = 16},
-            },
-        .role = meshtastic_Channel_Role_PRIMARY,
-    };
-    config.security.admin_key[0] = {
-        .size = 32,
-        .bytes = {0xcd, 0xc0, 0xb4, 0x3c, 0x53, 0x24, 0xdf, 0x13, 0xca, 0x5a, 0xa6, 0x0c, 0x0d, 0xec, 0x85, 0x5a,
-                  0x4c, 0xf6, 0x1a, 0x96, 0x04, 0x1a, 0x3e, 0xfc, 0xbb, 0x8e, 0x33, 0x71, 0xe5, 0xfc, 0xff, 0x3c},
-    };
-    config.security.admin_key_count = 1;
-    config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_US;
-    moduleConfig.has_mqtt = true;
-    moduleConfig.mqtt = meshtastic_ModuleConfig_MQTTConfig{
-        .enabled = true,
-        .proxy_to_client_enabled = true,
-    };
-    moduleConfig.has_store_forward = true;
-    moduleConfig.store_forward = meshtastic_ModuleConfig_StoreForwardConfig{
-        .enabled = true,
-        .history_return_max = 4,
-        .history_return_window = 600,
-        .is_server = true,
-    };
-    meshtastic_Position fixedGPS = meshtastic_Position{
-        .has_latitude_i = true,
-        .latitude_i = static_cast<uint32_t>(1 * 1e7),
-        .has_longitude_i = true,
-        .longitude_i = static_cast<uint32_t>(3 * 1e7),
-        .has_altitude = true,
-        .altitude = 64,
-        .location_source = meshtastic_Position_LocSource_LOC_MANUAL,
-    };
-    nodeDB->setLocalPosition(fixedGPS);
-    config.has_position = true;
-    config.position.fixed_position = true;
-    meshtastic_NodeInfoLite *info = nodeDB->getMeshNode(nodeDB->getNodeNum());
-    info->has_position = true;
-    info->position = TypeConversions::ConvertToPositionLite(fixedGPS);
-    hasBeenConfigured = true;
-}
-
-extern "C" {
-int portduino_main(int argc, char **argv); // Renamed "main" function from Meshtastic binary.
-
-// Start Meshtastic in a thread and wait till it has reached the ON state.
-int LLVMFuzzerInitialize(int *argc, char ***argv)
-{
-    settingsMap[maxtophone] = 5;
-
-    meshtasticThread = std::thread([program = *argv[0]]() {
-        char nodeIdStr[12];
-        strcpy(nodeIdStr, std::to_string(nodeId).c_str());
-        int argc = 7;
-        char *argv[] = {program, "-d", "/tmp/meshtastic", "-h", nodeIdStr, "-p", "0", nullptr};
-        try {
-            portduino_main(argc, argv);
-        } catch (const ShouldExitException &) {
-        }
-    });
-    std::atexit([] {
-        {
-            const std::lock_guard<std::mutex> lck(loopLock);
-            loopShouldExit = true;
-            loopCV.notify_one();
-        }
-        meshtasticThread.join();
-    });
-
-    // Wait for startup.
-    for (int i = 1; i < 20; ++i) {
-        if (powerFSM.getState() == &stateON) {
-            assert(hasBeenConfigured);
-            assert(router);
-            assert(nodeDB);
-            return 0;
-        }
-        std::this_thread::sleep_for(std::chrono::seconds(1));
-    }
-    return 1;
-}
-
-// This is the main entrypoint for the fuzzer (the fuzz target). The fuzzer will provide an array of bytes to be
-// interpreted by this method. To keep things simple, the bytes are interpreted as a binary serialized MeshPacket
-// proto. Any crashes discovered by the fuzzer will be written to a file. Unserialize that file to print the MeshPacket
-// that caused the failure.
-//
-// This guide provides best practices for writing a fuzzer target.
-// https://github.com/google/fuzzing/blob/master/docs/good-fuzz-target.md
-int LLVMFuzzerTestOneInput(const uint8_t *data, size_t length)
-{
-    meshtastic_MeshPacket p = meshtastic_MeshPacket_init_default;
-    pb_istream_t stream = pb_istream_from_buffer(data, length);
-    // Ignore any inputs that fail to decode or have fields set that are not transmitted over LoRa.
-    if (!pb_decode(&stream, &meshtastic_MeshPacket_msg, &p) || p.rx_time || p.rx_snr || p.priority || p.rx_rssi || p.delayed ||
-        p.public_key.size || p.next_hop || p.relay_node || p.tx_after)
-        return -1; // Reject: The input will not be added to the corpus.
-    if (p.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
-        meshtastic_Data d;
-        stream = pb_istream_from_buffer(p.decoded.payload.bytes, p.decoded.payload.size);
-        if (!pb_decode(&stream, &meshtastic_Data_msg, &d))
-            return -1; // Reject: The input will not be added to the corpus.
-    }
-
-    // Provide default values for a few fields so the fuzzer doesn't need to guess them.
-    if (p.from == 0)
-        p.from = nodeDB->getNodeNum();
-    if (p.to == 0)
-        p.to = nodeDB->getNodeNum();
-    static uint32_t packetId = 0;
-    if (p.id == 0)
-        p.id == ++packetId;
-    if (p.pki_encrypted && config.security.admin_key_count)
-        memcpy(&p.public_key, &config.security.admin_key[0], sizeof(p.public_key));
-
-    router->enqueueReceivedMessage(packetPool.allocCopy(p));
-    runLoopOnce();
-    return 0; // Accept: The input may be added to the corpus.
-}
-}

.clusterfuzzlite/router_fuzzer.options

@@ -1,2 +0,0 @@
-[libfuzzer]
-max_len=256

.clusterfuzzlite/router_fuzzer_seed_corpus.py

@@ -1,168 +0,0 @@
-"""Generate an initial set of MeshPackets.
-
-The fuzzer uses these MeshPackets as an initial seed of test candidates.
-
-It's also good to add any previously discovered crash test cases to this list
-to avoid future regressions.
-
-If left unset, the following values will be automatically set by the fuzzer.
-  - to: automatically set to the running node's NodeID
-  - from: automatically set to the running node's NodeID
-  - id: automatically set to the value of an incrementing counter
-
-Additionally, if `pki_encrypted` is populated in the packet, the first admin key
-will be copied into the `public_key` field.
-"""
-
-import base64
-
-from meshtastic import BROADCAST_NUM
-from meshtastic.protobuf import (
-    admin_pb2,
-    atak_pb2,
-    mesh_pb2,
-    portnums_pb2,
-    telemetry_pb2,
-)
-
-
-def From(node: int = 9):
-    """Return a dict suitable for **kwargs for populating the 'from' field.
-
-    'from' is a reserved keyword in Python. It can't be used directly as an
-    argument to the MeshPacket constructor. Rather **From() can be used as
-    the final argument to provide the from node as a **kwarg.
-
-    Defaults to 9 if no value is provided.
-    """
-    return {"from": node}
-
-
-packets = (
-    (
-        "position",
-        mesh_pb2.MeshPacket(
-            decoded=mesh_pb2.Data(
-                portnum=portnums_pb2.PortNum.POSITION_APP,
-                payload=mesh_pb2.Position(
-                    latitude_i=int(1 * 1e7),
-                    longitude_i=int(2 * 1e7),
-                    altitude=5,
-                    precision_bits=32,
-                ).SerializeToString(),
-            ),
-            to=BROADCAST_NUM,
-            **From(),
-        ),
-    ),
-    (
-        "telemetry",
-        mesh_pb2.MeshPacket(
-            decoded=mesh_pb2.Data(
-                portnum=portnums_pb2.PortNum.TELEMETRY_APP,
-                payload=telemetry_pb2.Telemetry(
-                    time=1736192207,
-                    device_metrics=telemetry_pb2.DeviceMetrics(
-                        battery_level=101,
-                        channel_utilization=8,
-                        air_util_tx=2,
-                        uptime_seconds=42,
-                    ),
-                ).SerializeToString(),
-            ),
-            to=BROADCAST_NUM,
-            **From(),
-        ),
-    ),
-    (
-        "text",
-        mesh_pb2.MeshPacket(
-            decoded=mesh_pb2.Data(
-                portnum=portnums_pb2.PortNum.TEXT_MESSAGE_APP,
-                payload=b"Hello world",
-            ),
-            to=BROADCAST_NUM,
-            **From(),
-        ),
-    ),
-    (
-        "user",
-        mesh_pb2.MeshPacket(
-            decoded=mesh_pb2.Data(
-                portnum=portnums_pb2.PortNum.NODEINFO_APP,
-                payload=mesh_pb2.User(
-                    id="!00000009",
-                    long_name="Node 9",
-                    short_name="N9",
-                    macaddr=b"\x00\x00\x00\x00\x00\x09",
-                    hw_model=mesh_pb2.HardwareModel.RAK4631,
-                    public_key=base64.b64decode(
-                        "L0ih/6F41itofdE8mYyHk1SdfOJ/QRM1KQ+pO4vEEjQ="
-                    ),
-                ).SerializeToString(),
-            ),
-            **From(),
-        ),
-    ),
-    (
-        "traceroute",
-        mesh_pb2.MeshPacket(
-            decoded=mesh_pb2.Data(
-                portnum=portnums_pb2.PortNum.TRACEROUTE_APP,
-                payload=mesh_pb2.RouteDiscovery(
-                    route=[10],
-                ).SerializeToString(),
-            ),
-            **From(),
-        ),
-    ),
-    (
-        "routing",
-        mesh_pb2.MeshPacket(
-            decoded=mesh_pb2.Data(
-                portnum=portnums_pb2.PortNum.ROUTING_APP,
-                payload=mesh_pb2.Routing(
-                    error_reason=mesh_pb2.Routing.NO_RESPONSE,
-                ).SerializeToString(),
-            ),
-            **From(),
-        ),
-    ),
-    (
-        "admin",
-        mesh_pb2.MeshPacket(
-            decoded=mesh_pb2.Data(
-                portnum=portnums_pb2.PortNum.ADMIN_APP,
-                payload=admin_pb2.AdminMessage(
-                    get_owner_request=True,
-                ).SerializeToString(),
-            ),
-            pki_encrypted=True,
-            **From(),
-        ),
-    ),
-    (
-        "atak",
-        mesh_pb2.MeshPacket(
-            decoded=mesh_pb2.Data(
-                portnum=portnums_pb2.PortNum.ATAK_PLUGIN,
-                payload=atak_pb2.TAKPacket(
-                    is_compressed=True,
-                    # Note, the strings are not valid for a compressed message, but will
-                    # give the fuzzer a starting point.
-                    contact=atak_pb2.Contact(
-                        callsign="callsign", device_callsign="device_callsign"
-                    ),
-                    chat=atak_pb2.GeoChat(
-                        message="message", to="to", to_callsign="to_callsign"
-                    ),
-                ).SerializeToString(),
-            ),
-            **From(),
-        ),
-    ),
-)
-
-for name, packet in packets:
-    with open(f"{name}.MeshPacket", "wb") as f:
-        f.write(packet.SerializeToString())

.devcontainer/99-platformio-udev.rules

@@ -1,183 +0,0 @@
-# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#    http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#####################################################################################
-#
-# INSTALLATION
-#
-# Please visit > https://docs.platformio.org/en/latest/core/installation/udev-rules.html
-#
-#####################################################################################
-
-#
-# Boards
-#
-
-# CP210X USB UART
-ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea[67][013]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="80a9", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# FT231XS USB UART
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Prolific Technology, Inc. PL2303 Serial Port
-ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# QinHeng Electronics HL-340 USB-Serial adapter
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-# QinHeng Electronics CH343 USB-Serial adapter
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d3", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-# QinHeng Electronics CH9102 USB-Serial adapter
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d4", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Arduino boards
-ATTRS{idVendor}=="2341", ATTRS{idProduct}=="[08][023]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="[08][02]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Arduino SAM-BA
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{MTP_NO_PROBE}="1"
-
-# Digistump boards
-ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Maple with DFU
-ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="000[34]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# USBtiny
-ATTRS{idProduct}=="0c9f", ATTRS{idVendor}=="1781", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# USBasp V2.0
-ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Teensy boards
-ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789A]?", ENV{MTP_NO_PROBE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789ABCD]?", MODE:="0666"
-KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", MODE:="0666"
-
-# TI Stellaris Launchpad
-ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI MSP430 Launchpad
-ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f432", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# GD32V DFU Bootloader
-ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="0189", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# FireBeetle-ESP32
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7522", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Wio Terminal
-ATTRS{idVendor}=="2886", ATTRS{idProduct}=="[08]02d", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Raspberry Pi Pico
-ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="[01]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# AIR32F103
-ATTRS{idVendor}=="0d28", ATTRS{idProduct}=="0204", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# STM32 virtual COM port
-ATTRS{idVendor}=="0483", ATTRS{idProduct}=="5740", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-#
-# Debuggers
-#
-
-# Black Magic Probe
-SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic GDB Server", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic UART Port", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# opendous and estick
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Original FT232/FT245/FT2232/FT232H/FT4232
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="60[01][104]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# DISTORTEC JTAG-lock-pick Tiny 2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TUMPA, TUMPA Lite
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a9[89]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# XDS100v2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Xverve Signalyzer Tool (DT-USB-ST), Signalyzer LITE (DT-USB-SLITE)
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI/Luminary Stellaris Evaluation Board FTDI (several)
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd[9a]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# egnite Turtelizer 2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Section5 ICEbear
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c14[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Amontec JTAGkey and JTAGkey-tiny
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI ICDI
-ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# STLink probes
-ATTRS{idVendor}=="0483", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Hilscher NXHX Boards
-ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Hitex probes
-ATTRS{idVendor}=="0640", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Altera USB Blaster
-ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Amontec JTAGkey-HiSpeed
-ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# SEGGER J-Link
-ATTRS{idVendor}=="1366", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Raisonance RLink
-ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Debug Board for Neo1973
-ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Olimex probes
-ATTRS{idVendor}=="15ba", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# USBprog with OpenOCD firmware
-ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
-ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Marvell Sheevaplug
-ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Keil Software, Inc. ULink
-ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2710", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# CMSIS-DAP compatible adapters
-ATTRS{product}=="*CMSIS-DAP*", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Atmel AVR Dragon
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2107", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Espressif USB JTAG/serial debug unit
-ATTRS{idVendor}=="303a", ATTRS{idProduct}=="1001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Zephyr framework USB CDC-ACM
-ATTRS{idVendor}=="2fe3", ATTRS{idProduct}=="0100", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"

.devcontainer/Dockerfile

@@ -1,45 +1,11 @@
-# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
-# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
-FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
+# See here for image contents: https://github.com/microsoft/vscode-dev-containers/tree/v0.162.0/containers/ubuntu/.devcontainer/base.Dockerfile
 
-USER root
+# [Choice] Ubuntu version: bionic, focal
+ARG VARIANT="focal"
+FROM mcr.microsoft.com/vscode/devcontainers/base:0-${VARIANT}
 
+# [Optional] Uncomment this section to install additional OS packages.
 RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
-    && apt-get -y install --no-install-recommends \
-    ca-certificates \
-    g++ \
-    git \
-    libbluetooth-dev \
-    libgpiod-dev \
-    liborcania-dev \
-    libssl-dev \
-    libulfius-dev \
-    libyaml-cpp-dev \
-    pipx \
-    pkg-config \
-    python3 \
-    python3-pip \
-    python3-venv \
-    python3-wheel \
-    wget \
-    zip \
-    usbutils \
-    hwdata \
-    gpg \
-    gnupg2 \
-    libusb-1.0-0-dev \
-    libuv1-dev \
-    libi2c-dev \
-    libxcb-xkb-dev \
-    libxkbcommon-dev \
-    libinput-dev \
-    && apt-get clean && rm -rf /var/lib/apt/lists/*
-
-RUN pipx install platformio
-
-COPY 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules
-
-USER vscode
-
-HEALTHCHECK NONE
+     && apt-get -y install python3-distutils python3-pip
+RUN pip3 install platformio meshtastic adafruit-nrfutil
+RUN wget https://github.com/protocolbuffers/protobuf/releases/download/v3.15.8/protoc-3.15.8-linux-x86_64.zip -O /tmp/protoc.zip && cd /tmp && unzip protoc.zip && chmod a+x bin/protoc && cp bin/protoc /usr/local/bin

.devcontainer/devcontainer.json

@@ -1,36 +1,32 @@
-// For format details, see https://aka.ms/devcontainer.json. For config options, see the
-// README at: https://github.com/devcontainers/templates/tree/main/src/cpp
+// For format details, see https://aka.ms/devcontainer.json. For config options, see the README at:
+// https://github.com/microsoft/vscode-dev-containers/tree/v0.162.0/containers/ubuntu
 {
-  "name": "Meshtastic Firmware Dev",
-  "build": {
-    "dockerfile": "Dockerfile"
-  },
-  "features": {
-    "ghcr.io/devcontainers/features/python:1": {
-      "installTools": true,
-      "version": "latest"
-    }
-  },
-  "customizations": {
-    "vscode": {
-      "extensions": [
-        "ms-vscode.cpptools",
+	"name": "Ubuntu",
+	"build": {
+		"dockerfile": "Dockerfile",
+		// Update 'VARIANT' to pick an Ubuntu version: focal, bionic
+		"args": { "VARIANT": "focal" }
+	},
+
+	// Set *default* container specific settings.json values on container create.
+	"settings": { 
+		"terminal.integrated.shell.linux": "/bin/bash"
+	},
+
+	// Add the IDs of extensions you want installed when the container is created.
+	"extensions": [
         "platformio.platformio-ide",
-        "Trunk.io"
-      ],
-      "unwantedRecommendations": ["ms-azuretools.vscode-docker"],
-      "settings": {
-        "extensions.ignoreRecommendations": true
-      }
-    }
-  },
+        "xaver.clang-format"
+		],
 
-  // Use 'forwardPorts' to make a list of ports inside the container available locally.
-  "forwardPorts": [4403],
+	// Use 'forwardPorts' to make a list of ports inside the container available locally.
+	// "forwardPorts": [],
 
-  // Use "--device=" to make a local device available inside the container.
-  // "runArgs": ["--device=/dev/ttyACM0"],
+	// Use 'postCreateCommand' to run commands after the container is created.
+	// "postCreateCommand": "uname -a",
 
-  // Run commands to prepare the container for use
-  "postCreateCommand": ".devcontainer/setup.sh"
-}
+	// Comment out connect as root instead. More info: https://aka.ms/vscode-remote/containers/non-root.
+	"remoteUser": "vscode",
+
+	"postCreateCommand": "git submodule update --init"
+}

.devcontainer/setup.sh

@@ -1,6 +0,0 @@
-#!/usr/bin/env sh
-
-git submodule update --init
-
-pip install --no-cache-dir setuptools
-pipx install esptool

.dockerignore

@@ -1 +0,0 @@
-.gitignore

.env.example

@@ -1,4 +0,0 @@
-# Absolute path to the local meshtastic config.yaml file
-CONFIG_PATH=/path/to/meshtastic/config.yaml
-# USB device to passthrough (`lsusb -t`: look for `ch341`)
-USB_DEVICE=/dev/bus/usb/001/037

.gitattributes

@@ -1,5 +0,0 @@
-* text=auto eol=lf
-*.cmd text eol=crlf
-*.bat text eol=crlf
-*.ps1 text eol=crlf
-*.{sh,[sS][hH]} text eol=lf

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -1,108 +0,0 @@
-name: Bug Report
-description: File a bug report
-title: "[Bug]: "
-labels: [bug, triage]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Thanks for taking the time to fill out this bug report!
-
-  - type: dropdown
-    id: category
-    attributes:
-      label: Category
-      description: How would you catagorize this issue?
-      multiple: true
-      options:
-        - Hardware Compatibility
-        - BLE
-        - Serial
-        - WiFi
-        - Other
-    validations:
-      required: true
-
-  - type: dropdown
-    id: hardware
-    attributes:
-      label: Hardware
-      description: What hardware are you encountering this issue on?
-      multiple: true
-      options:
-        - Not Applicable
-        - T-Beam
-        - T-Beam S3
-        - T-Beam 0.7
-        - T-Lora v1
-        - T-Lora v1.3
-        - T-Lora v2 1.6
-        - T-Deck
-        - T-Echo
-        - T-Watch
-        - Rak4631
-        - Rak11200
-        - Rak11310
-        - Heltec v1
-        - Heltec v2
-        - Heltec v2.1
-        - Heltec V3
-        - Heltec Wireless Paper
-        - Heltec Wireless Tracker
-        - Heltec Mesh Node T114
-        - Heltec Vision Master E213
-        - Heltec Vision Master E290
-        - Heltec Vision Master T190
-        - Nano G1
-        - Nano G1 Explorer
-        - Nano G2 Ultra
-        - Raspberry Pi Pico (W)
-        - Relay v1
-        - Relay v2
-        - Seeed Wio Tracker 1110
-        - Seeed Card Tracker T1000-E
-        - Station G1
-        - Station G2
-        - unPhone
-        - CanaryOne
-        - Chatter
-        - Linux Native
-        - DIY
-        - Other
-    validations:
-      required: true
-
-  - type: checkboxes
-    id: mui
-    attributes:
-      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
-      options:
-        - label: Meshtastic UI aka MUI colorTFT
-        - label: InkHUD ePaper
-        - label: OLED slide UI on any display
-
-  - type: input
-    id: version
-    attributes:
-      label: Firmware Version
-      description: This can be found on the device's screen or via one of the apps.
-      placeholder: x.x.x.yyyyyyy
-    validations:
-      required: true
-
-  - type: textarea
-    id: body
-    attributes:
-      label: Description
-      description: Please provide details on what steps you performed for this to happen.
-    validations:
-      required: true
-
-  - type: textarea
-    id: logs
-    attributes:
-      label: Relevant log output
-      description: If you have any log output to help in diagnosing your bug, please provide it here.
-      render: Shell
-    validations:
-      required: false

.github/ISSUE_TEMPLATE/New Board.yml

@@ -1,46 +0,0 @@
-name: New Board
-description: Request us to support new hardware
-title: "[Board]: "
-labels: [enhancement, triage]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Thanks for requesting a new board, this will not gurantee that we will support it, but will be on our radar.
-
-  - type: dropdown
-    id: soc
-    attributes:
-      label: SOC
-      description: What SOC does your board have?
-      multiple: true
-      options:
-        - NRF52
-        - ESP32
-        - Other
-    validations:
-      required: true
-
-  - type: input
-    id: lora
-    attributes:
-      label: Lora IC
-      description: What LoRa IC does the board have?
-    validations:
-      required: true
-
-  - type: input
-    id: link
-    attributes:
-      label: Product Link
-      description: Where can we find this product?
-    validations:
-      required: true
-
-  - type: textarea
-    id: body
-    attributes:
-      label: Description
-      description: Please provide any further details you think we may need.
-    validations:
-      required: true

.github/ISSUE_TEMPLATE/bug-report-or-feature-proposal.md

@@ -0,0 +1,38 @@
+---
+name: Bug report or feature proposal
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+Please - if you just have a question (i.e. not a bug report or a feature proposal), post in our [forum](https://meshtastic.discourse.group/) instead.
+
+**Describe the bug**
+A clear and concise description of what the bug is.
+
+**To Reproduce**
+Steps to reproduce the behavior:
+1. Go to '...'
+2. Click on '....'
+3. Scroll down to '....'
+4. See error
+
+**Expected behavior**
+A clear and concise description of what you expected to happen.
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**Device info:**
+ - Device model: [e.g. TBEAM]
+ - Software Version [e.g. 0.7.8]
+
+**Smartphone information (if relevant):**
+ - Device: [e.g. iPhone6]
+ - OS: [e.g. iOS8.1]
+ - App Version [e.g. 0.7.2]
+
+**Additional context**
+Add any other context about the problem here.

.github/ISSUE_TEMPLATE/feature.yml

@@ -1,31 +0,0 @@
-name: Feature Request
-description: Request a new feature
-title: "[Feature Request]: "
-labels: [enhancement]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Thanks for your request this will not gurantee that we will implement it, but it will be reviewed.
-  - type: dropdown
-    id: soc
-    attributes:
-      label: Platform
-      description: What device platform will support your feature?
-      multiple: true
-      options:
-        - NRF52
-        - ESP32
-        - RP2040
-        - Linux Native
-        - Cross-Platform
-        - other
-    validations:
-      required: true
-  - type: textarea
-    id: body
-    attributes:
-      label: Description
-      description: Please provide details about your enhancement.
-    validations:
-      required: true

.github/actionlint.yaml

@@ -1,5 +0,0 @@
-# Configuration related to self-hosted runner.
-self-hosted-runner:
-  # Labels of self-hosted runner in array of strings.
-  labels:
-    - test-runner

.github/actions/build-variant/action.yml

@@ -1,108 +0,0 @@
-name: Setup Build Variant Composite Action
-description: Variant build actions for Meshtastic Platform IO steps
-
-inputs:
-  board:
-    description: The board to build for
-    required: true
-  github_token:
-    description: GitHub token
-    required: true
-  build-script-path:
-    description: Path to the build script
-    required: true
-  remove-debug-flags:
-    description: A space separated list of files to remove debug flags from
-    required: false
-    default: ""
-  ota-firmware-source:
-    description: The OTA firmware file to pull
-    required: false
-    default: ""
-  ota-firmware-target:
-    description: The target path to store the OTA firmware file
-    required: false
-    default: ""
-  artifact-paths:
-    description: A newline separated list of paths to store as artifacts
-    required: false
-    default: ""
-  include-web-ui:
-    description: Include the web UI in the build
-    required: false
-    default: "false"
-  arch:
-    description: Processor arch name
-    required: true
-    default: esp32
-
-runs:
-  using: composite
-  steps:
-    - name: Build base
-      id: base
-      uses: ./.github/actions/setup-base
-
-    - name: Get web ui version
-      if: inputs.include-web-ui == 'true'
-      id: webver
-      shell: bash
-      run: |
-        echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
-
-    - name: Pull web ui
-      if: inputs.include-web-ui == 'true'
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/web
-        file: build.tar
-        target: build.tar
-        token: ${{ inputs.github_token }}
-        version: tags/v${{ steps.webver.outputs.ver }}
-
-    - name: Unpack web ui
-      if: inputs.include-web-ui == 'true'
-      shell: bash
-      run: |
-        tar -xf build.tar -C data/static
-        rm build.tar
-
-    - name: Remove debug flags for release
-      shell: bash
-      if: inputs.remove-debug-flags != ''
-      run: |
-        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
-          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
-        done
-
-    - name: PlatformIO ${{ inputs.arch }} download cache
-      uses: actions/cache@v4
-      with:
-        path: ~/.platformio/.cache
-        key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
-
-    - name: Build ${{ inputs.board }}
-      shell: bash
-      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
-
-    - name: Pull OTA Firmware
-      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/firmware-ota
-        file: ${{ inputs.ota-firmware-source }}
-        target: ${{ inputs.ota-firmware-target }}
-        token: ${{ inputs.github_token }}
-
-    - name: Get release version string
-      shell: bash
-      run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-      id: version
-
-    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
-      with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-        overwrite: true
-        path: |
-          ${{ inputs.artifact-paths }}

.github/actions/initbuild/action.yml

@@ -0,0 +1,39 @@
+name: 'Common init'
+
+# WARNING due to https://github.com/actions/runner/issues/646
+# this code can't work - must copy and paste into workflows for now because 'uses' is not supported
+runs:
+  using: "composite"
+  steps:
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v1
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools
+      # We actually want to run this every time
+      # if: steps.cache-pip.outputs.cache-hit != 'true'
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio meshtastic adafruit-nrfutil
+
+    # Don't cache for now because I want to be lazy with portuino updates githashes
+    # - name: Cache platformio
+    #  uses: actions/cache@v1
+    #  id: cache-platformio # needed in if test
+    #  with:
+    #    path: ~/.platformio
+    #    key: ${{ runner.os }}-platformio
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+

.github/actions/setup-base/action.yml

@@ -1,46 +0,0 @@
-name: Setup Build Base Composite Action
-description: Base build actions for Meshtastic Platform IO steps
-
-runs:
-  using: composite
-  steps:
-    - name: Checkout code
-      uses: actions/checkout@v4
-      with:
-        submodules: recursive
-        ref: ${{github.event.pull_request.head.ref}}
-        repository: ${{github.event.pull_request.head.repo.full_name}}
-
-    - name: Uncomment build epoch
-      shell: bash
-      run: |
-        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
-    - name: Install dependencies
-      shell: bash
-      run: |
-        sudo apt-get -y update --fix-missing
-        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
-
-    - name: Setup Python
-      uses: actions/setup-python@v5
-      with:
-        python-version: 3.x
-        cache: pip
-        cache-dependency-path: |
-          .github/actions/**
-          **.ini
-
-    - name: Upgrade python tools
-      shell: bash
-      run: |
-        python -m pip install --upgrade pip
-        pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
-        pip install -U platformio adafruit-nrfutil --no-build-isolation
-        pip install -U poetry --no-build-isolation
-        pip install -U meshtastic --pre --no-build-isolation
-
-    - name: Upgrade platformio
-      shell: bash
-      run: |
-        pio upgrade

.github/actions/setup-native/action.yml

@@ -1,14 +0,0 @@
-name: Setup native build
-description: Install libraries needed for building the Native/Portduino build
-
-runs:
-  using: composite
-  steps:
-    - name: Setup base
-      id: base
-      uses: ./.github/actions/setup-base
-
-    - name: Install libs needed for native build
-      shell: bash
-      run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev

.github/pull_request_template.md

@@ -1,27 +1,13 @@
-## 🙏 Thank you for sending in a pull request, here's some tips to get started!
+## Thank you for sending in a pull request, here's some tips to get started!
+
+(Please delete all these tips and replace with your text)
 
-### ❌ (Please delete all these tips and replace them with your text) ❌
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
-  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
+  to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
-  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
+  because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
-- Please also enable "Allow edits by maintainers".
-- Please do not submit untested code.
-- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
-- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
-
-
-## 🤝 Attestations
-- [ ] I have tested that my proposed changes behave as described.
-- [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
-  - [ ] Heltec (Lora32) V3
-  - [ ] LilyGo T-Deck 
-  - [ ] LilyGo T-Beam
-  - [ ] RAK WisBlock 4631
-  - [ ] Seeed Studio T-1000E tracker card
-  - [ ] Other (please specify below)

.github/workflows/build_debian_src.yml

@@ -1,72 +0,0 @@
-name: Build Debian Source Package
-
-on:
-  workflow_call:
-    secrets:
-      PPA_GPG_PRIVATE_KEY:
-        required: false
-    inputs:
-      series:
-        description: Ubuntu/Debian series to target
-        required: true
-        type: string
-      build_location:
-        description: Location where build will execute
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-debian-src:
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install deps
-        shell: bash
-        working-directory: meshtasticd
-        run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y software-properties-common build-essential devscripts equivs
-          sudo add-apt-repository ppa:meshtastic/build-tools -y
-          sudo apt-get update -y --fix-missing
-          sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
-
-      - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v6
-        with:
-          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
-        id: gpg
-
-      - name: Get release version string
-        working-directory: meshtasticd
-        run: |
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        env:
-          BUILD_LOCATION: ${{ inputs.build_location }}
-        id: version
-
-      - name: Fetch libdeps, package debian source
-        working-directory: meshtasticd
-        run: debian/ci_pack_sdeb.sh
-        env:
-          SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
-          PKG_VERSION: ${{ steps.version.outputs.deb }}
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
-          overwrite: true
-          path: |
-            meshtasticd_${{ steps.version.outputs.deb }}*

.github/workflows/build_esp32.yml

@@ -1,37 +0,0 @@
-name: Build ESP32
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware.bin
-          ota-firmware-target: release/bleota.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-C3
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c3:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C3
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-C6
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c6:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C6
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-S3
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-s3:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-S3
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-s3.bin
-          ota-firmware-target: release/bleota-s3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32s3

.github/workflows/build_nrf52.yml

@@ -1,30 +0,0 @@
-name: Build NRF52
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-nrf52:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build NRF52
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-nrf52.sh
-          artifact-paths: |
-            release/*.hex
-            release/*.uf2
-            release/*.elf
-            release/*.zip
-          arch: nrf52840

.github/workflows/build_rpi2040.yml

@@ -1,28 +0,0 @@
-name: Build RPI2040
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-rpi2040:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build Raspberry Pi 2040
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-rpi2040.sh
-          artifact-paths: |
-            release/*.uf2
-            release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -1,29 +0,0 @@
-name: Build STM32
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-stm32:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build STM32WL
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-stm32.sh
-          artifact-paths: |
-            release/*.hex
-            release/*.bin
-            release/*.elf
-          arch: stm32

.github/workflows/daily_packaging.yml

@@ -1,51 +0,0 @@
-name: Daily Packaging
-on:
-  schedule:
-    - cron: 0 9 * * *
-  workflow_dispatch:
-  push:
-    branches:
-      - master
-    paths:
-      - debian/**
-      - "*.rpkg"
-      - .github/workflows/nightly_packaging.yml
-      - .github/workflows/build_debian_src.yml
-      - .github/workflows/package_ppa.yml
-      - .github/workflows/package_obs.yml
-      - .github/workflows/hook_copr.yml
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  docker-multiarch:
-    uses: ./.github/workflows/docker_manifest.yml
-    with:
-      release_channel: daily
-    secrets: inherit
-
-  package-ppa:
-    strategy:
-      fail-fast: false
-      matrix:
-        series: [plucky, oracular, noble, jammy]
-    uses: ./.github/workflows/package_ppa.yml
-    with:
-      ppa_repo: ppa:meshtastic/daily
-      series: ${{ matrix.series }}
-    secrets: inherit
-
-  package-obs:
-    uses: ./.github/workflows/package_obs.yml
-    with:
-      obs_project: network:Meshtastic:daily
-      series: unstable
-    secrets: inherit
-
-  hook-copr:
-    uses: ./.github/workflows/hook_copr.yml
-    with:
-      copr_project: daily
-    secrets: inherit

.github/workflows/docker_build.yml

@@ -1,99 +0,0 @@
-name: Build Docker
-
-# Build Docker image, push untagged (digest-only)
-
-on:
-  workflow_call:
-    secrets:
-      DOCKER_FIRMWARE_TOKEN:
-        required: false # Only required for push
-    inputs:
-      distro:
-        description: Distro to target
-        required: true
-        type: string
-        # choices: [debian, alpine]
-      platform:
-        description: Platform to target
-        required: true
-        type: string
-      runs-on:
-        description: Runner to use
-        required: true
-        type: string
-      push:
-        description: Push images to registry
-        required: false
-        type: boolean
-        default: false
-      pio_env:
-        description: PlatformIO environment to build
-        required: false
-        type: string
-        default: native
-    outputs:
-      digest:
-        description: Digest of built image
-        value: ${{ jobs.docker-build.outputs.digest }}
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  docker-build:
-    outputs:
-      digest: ${{ steps.docker_variant.outputs.digest }}
-    runs-on: ${{ inputs.runs-on }}
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Docker login
-        if: ${{ inputs.push }}
-        uses: docker/login-action@v3
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
-
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v3
-
-      - name: Docker setup
-        uses: docker/setup-buildx-action@v3
-
-      - name: Sanitize platform string
-        id: sanitize_platform
-        # Replace slashes with underscores
-        run: echo "cleaned_platform=${{ inputs.platform }}" | sed 's/\//_/g' >> $GITHUB_OUTPUT
-
-      - name: Docker tag
-        id: meta
-        uses: docker/metadata-action@v5
-        with:
-          images: meshtastic/meshtasticd
-          tags: |
-            GHA-${{ steps.version.outputs.long }}-${{ inputs.distro }}-${{ steps.sanitize_platform.outputs.cleaned_platform }}
-          flavor: latest=false
-
-      - name: Docker build and push
-        uses: docker/build-push-action@v6
-        id: docker_variant
-        with:
-          context: .
-          file: |
-            ${{ contains(inputs.distro, 'debian') && './Dockerfile' || contains(inputs.distro, 'alpine') && './alpine.Dockerfile' }}
-          push: ${{ inputs.push }}
-          tags: ${{ steps.meta.outputs.tags }} # Tag is only meant to be consumed by the "manifest" job
-          platforms: ${{ inputs.platform }}
-          build-args: |
-            PIO_ENV=${{ inputs.pio_env }}

.github/workflows/docker_manifest.yml

@@ -1,186 +0,0 @@
-name: Build Docker Multi-Arch Manifest
-
-on:
-  workflow_call:
-    secrets:
-      DOCKER_FIRMWARE_TOKEN:
-        required: true
-    inputs:
-      release_channel:
-        description: Release channel to target
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  docker-debian-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: true
-    secrets: inherit
-
-  docker-debian-arm64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: true
-    secrets: inherit
-
-  docker-debian-armv7:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: true
-    secrets: inherit
-
-  docker-alpine-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: true
-    secrets: inherit
-
-  docker-alpine-arm64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: true
-    secrets: inherit
-
-  docker-alpine-armv7:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: true
-    secrets: inherit
-
-  docker-manifest:
-    needs:
-      # Debian
-      - docker-debian-amd64
-      - docker-debian-arm64
-      - docker-debian-armv7
-      # Alpine
-      - docker-alpine-amd64
-      - docker-alpine-arm64
-      - docker-alpine-armv7
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Enumerate tags
-        shell: python
-        run: |
-          import os
-
-          short = "${{ steps.version.outputs.short }}"
-          long = "${{ steps.version.outputs.long }}"
-          release_channel = "${{ inputs.release_channel }}"
-          tags = {
-            "beta": {
-              "debian": [
-                f"{short}", f"{long}", f"{short}-beta", f"{long}-beta", "beta", "latest",
-                f"{short}-debian", f"{long}-debian", f"{short}-beta-debian", f"{long}-beta-debian", "beta-debian"
-              ],
-              "alpine": [
-                f"{short}-alpine", f"{long}-alpine", f"{short}-beta-alpine", f"{long}-beta-alpine", "beta-alpine"
-              ]
-            },
-            "alpha": {
-              "debian": [
-                f"{short}-alpha", f"{long}-alpha", "alpha",
-                f"{short}-alpha-debian", f"{long}-alpha-debian", "alpha-debian"
-              ],
-              "alpine": [
-                f"{short}-alpha-alpine", f"{long}-alpha-alpine", "alpha-alpine"
-              ]
-            },
-            "daily": {
-              "debian": ["daily", "daily-debian"],
-              "alpine": ["daily-alpine"]
-            }
-          }
-
-          with open(os.environ["GITHUB_OUTPUT"], "a") as fh:
-            fh.write("debian<<EOF\n")
-            fh.write("\n".join(tags[release_channel]["debian"]))
-            fh.write("\nEOF\n")
-
-            fh.write("alpine<<EOF\n")
-            fh.write("\n".join(tags[release_channel]["alpine"]))
-            fh.write("\nEOF\n")
-        id: tags
-
-      - name: Docker login
-        uses: docker/login-action@v3
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
-
-      - name: Docker meta (Debian)
-        id: meta_debian
-        uses: docker/metadata-action@v5
-        with:
-          images: meshtastic/meshtasticd
-          tags: |
-            ${{ steps.tags.outputs.debian }}
-          flavor: latest=false
-
-      - name: Create Docker manifest (Debian)
-        id: manifest_debian
-        uses: int128/docker-manifest-create-action@v2
-        with:
-          tags: |
-            ${{ steps.meta_debian.outputs.tags }}
-          push: true
-          sources: |
-            meshtastic/meshtasticd@${{ needs.docker-debian-amd64.outputs.digest }}
-            meshtastic/meshtasticd@${{ needs.docker-debian-arm64.outputs.digest }}
-            meshtastic/meshtasticd@${{ needs.docker-debian-armv7.outputs.digest }}
-
-      - name: Docker meta (Alpine)
-        id: meta_alpine
-        uses: docker/metadata-action@v5
-        with:
-          images: meshtastic/meshtasticd
-          tags: |
-            ${{ steps.tags.outputs.alpine }}
-
-      - name: Create Docker manifest (Alpine)
-        id: manifest_alpine
-        uses: int128/docker-manifest-create-action@v2
-        with:
-          tags: |
-            ${{ steps.meta_alpine.outputs.tags }}
-          push: true
-          sources: |
-            meshtastic/meshtasticd@${{ needs.docker-alpine-amd64.outputs.digest }}
-            meshtastic/meshtasticd@${{ needs.docker-alpine-arm64.outputs.digest }}
-            meshtastic/meshtasticd@${{ needs.docker-alpine-armv7.outputs.digest }}

.github/workflows/hook_copr.yml

@@ -1,38 +0,0 @@
-name: Trigger COPR build
-
-on:
-  workflow_call:
-    secrets:
-      COPR_API_CONFIG:
-    inputs:
-      copr_project:
-        description: COPR project to target
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-copr-hook:
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          ref: ${{ github.ref }}
-          repository: ${{ github.repository }}
-
-      - name: Trigger COPR build
-        uses: vidplace7/copr-build@main
-        id: copr_build
-        env:
-          COPR_API_TOKEN_CONFIG: ${{ secrets.COPR_API_CONFIG }}
-        with:
-          owner: "@meshtastic"
-          package-name: meshtasticd
-          project-name: ${{ inputs.copr_project }}
-          git-remote: "${{ github.server_url }}/${{ github.repository }}.git"
-          committish: ${{ github.sha }}

.github/workflows/main.yml

@@ -0,0 +1,151 @@
+name: Continuous Integration (Legacy serial build)
+on:
+  # Triggers the workflow on push or pull request events but only for the master branch
+  workflow_dispatch:
+  
+jobs:
+
+  ci-check:
+    runs-on: ubuntu-latest
+    steps:
+
+    - name: Checkout code
+      uses: actions/checkout@v2
+      with:
+        submodules: 'recursive'
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
+
+    - name: Install cppcheck
+      run: |
+        sudo apt-get install -y cppcheck
+
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v1
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools and install platformio
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+    - name: Check everything
+      run: bin/check-all.sh
+
+
+
+  ci-build:
+    runs-on: ubuntu-latest
+    steps:
+
+    - name: Checkout code
+      uses: actions/checkout@v2
+      with:
+        submodules: 'recursive'
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
+
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v1
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools
+      # We actually want to run this every time
+      # if: steps.cache-pip.outputs.cache-hit != 'true'
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio meshtastic adafruit-nrfutil
+
+    # - name: Cache platformio
+    #  uses: actions/cache@v1
+    #  id: cache-platformio # needed in if test
+    #  with:
+    #    path: ~/.platformio
+    #    key: ${{ runner.os }}-platformio
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+    - name: Pull web ui
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: "meshtastic/meshtastic-web"
+        file: "build.tar"
+        target: "build.tar"
+        token: ${{ secrets.GITHUB_TOKEN }}
+
+    - name: Unpack web ui
+      run: |
+        tar -xf build.tar -C data/static
+        rm build.tar
+
+    # We now run integration test before other build steps (to quickly see runtime failures)
+    - name: Build for native
+      run: platformio run -e native
+    - name: Integration test
+      run: |
+        .pio/build/native/program &
+        sleep 20 # 5 seconds was not enough
+        echo "Simulator started, launching python test..."
+        python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+    - name: Cat bin/build-all.sh
+      run: |
+        cat bin/build-all.sh
+
+    - name: Build everything
+      run: bin/build-all.sh
+
+    - name: Get release version string
+      run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+      id: version
+
+    - name: Store binaries as an artifact
+      uses: actions/upload-artifact@v2
+      with:
+        name: firmware-${{ steps.version.outputs.version }}.zip
+        path: release/archive/firmware-${{ steps.version.outputs.version }}.zip
+        retention-days: 90
+
+    - name: Store debugging elf files as an artifact
+      uses: actions/upload-artifact@v2
+      with:
+        name: debug-elfs
+        path: release/archive/elfs-*.zip
+        retention-days: 7
+
+    - name: Download firmware.zip
+      uses: actions/download-artifact@master
+      with:
+        name: firmware-${{ steps.version.outputs.version }}.zip
+        path: ./
+
+    - name: Pull request artifacts
+      if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+      uses: gavv/pull-request-artifacts@v1.0.0
+      with:
+        commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+        artifacts-branch: artifacts
+        artifacts: ./firmware-${{ steps.version.outputs.version }}.zip

.github/workflows/main_matrix.yml

@@ -1,468 +1,349 @@
-name: CI
-concurrency:
-  group: ci-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
+name: Continuous Integration PR Checks (1.2 Legacy)
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
-    branches:
-      - master
-      - develop
-      - event/*
+    branches: [ 1.2-legacy ]
     paths-ignore:
-      - "**.md"
-      - version.properties
-
+      - '**.md'
+      - '**.yml'
+      - 'version.properties'
+      
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
-    branches:
-      - master
-      - develop
-      - event/*
+    branches: [ 1.2-legacy ]
     paths-ignore:
-      - "**.md"
-      #- "**.yml"
+      - '**.md'
+      - '**.yml'
 
   workflow_dispatch:
 
 jobs:
-  setup:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
-    runs-on: ubuntu-latest
-    steps:
-      - id: checkout
-        uses: actions/checkout@v4
-        name: Checkout base
-      - id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
-    outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
-      check: ${{ steps.jsonStep.outputs.check }}
 
   check:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.check) }}
-
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    steps:
-      - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.board }}
-        run: bin/check-all.sh ${{ matrix.board }}
-
-  build-esp32:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_esp32.yml
-    with:
-      board: ${{ matrix.board }}
-
-  build-esp32-s3:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_esp32_s3.yml
-    with:
-      board: ${{ matrix.board }}
-
-  build-esp32-c3:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_esp32_c3.yml
-    with:
-      board: ${{ matrix.board }}
-
-  build-esp32-c6:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_esp32_c6.yml
-    with:
-      board: ${{ matrix.board }}
-
-  build-nrf52:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_nrf52.yml
-    with:
-      board: ${{ matrix.board }}
-
-  build-rpi2040:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_rpi2040.yml
-    with:
-      board: ${{ matrix.board }}
-
-  build-stm32:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_stm32.yml
-    with:
-      board: ${{ matrix.board }}
-
-  build-debian-src:
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
+        include:
+          - board: rak11200
+          - board: tlora-v2
+          - board: tlora-v1
+          - board: tlora_v1_3
+          - board: tlora-v2-1-1.6
+          - board: tbeam
+          - board: heltec-v1
+          - board: heltec-v2.0
+          - board: heltec-v2.1
+          - board: tbeam0.7
+          - board: meshtastic-diy-v1
+          - board: rak4631_5005
+          - board: rak4631_19003
+          - board: t-echo
+          - board: nano-g1
+          - board: meshtastic-dr-dev
+  
     runs-on: ubuntu-latest
-    needs:
-      [
-        build-esp32,
-        build-esp32-s3,
-        build-esp32-c3,
-        build-esp32-c6,
-        build-nrf52,
-        build-rpi2040,
-        build-stm32,
-      ]
+    steps:
+
+    - name: Checkout code
+      uses: actions/checkout@v2
+      with:
+        submodules: 'recursive'
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
+
+    - name: Install cppcheck
+      run: |
+        sudo apt-get install -y cppcheck
+
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v1
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools and install platformio
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+    - name: Check ${{ matrix.board }}
+      run: bin/check-all.sh ${{ matrix.board }}
+      
+  after-checks:
+    runs-on: ubuntu-latest
+    needs: [check]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v2
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v4
-        with:
-          path: ./
-          pattern: firmware-${{matrix.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./littlefswebui-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v4
-        with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
-          tag_name: v${{ steps.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v4
-        with:
-          pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
-          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
+  build-esp32:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
+        include:
+          - board: rak11200
+          - board: tlora-v2
+          - board: tlora-v1
+          - board: tlora_v1_3
+          - board: tlora-v2-1-1.6
+          - board: tbeam
+          - board: heltec-v1
+          - board: heltec-v2.0
+          - board: heltec-v2.1
+          - board: tbeam0.7
+          - board: meshtastic-diy-v1
+          - board: nano-g1
+          - board: meshtastic-dr-dev
+    
     runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts]
     steps:
-      - name: Checkout
-        uses: actions/checkout@v4
 
-      - name: Setup Python
-        uses: actions/setup-python@v5
+    - name: Checkout code
+      uses: actions/checkout@v2
+      with:
+        submodules: 'recursive'
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
+
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v1
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio meshtastic adafruit-nrfutil
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+    - name: Pull web ui
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: "meshtastic/meshtastic-web"
+        file: "build.tar"
+        target: "build.tar"
+        token: ${{ secrets.GITHUB_TOKEN }}
+
+    - name: Unpack web ui
+      run: |
+        tar -xf build.tar -C data/static
+        rm build.tar
+
+    - name: Build ESP32
+      run: bin/build-esp32.sh ${{ matrix.board }}
+
+    - name: Get release version string
+      run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+      id: version
+
+    - name: Store binaries as an artifact
+      uses: actions/upload-artifact@v2
+      with:
+        name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
+        path: |
+          release/*.bin
+          release/*.elf
+        retention-days: 90
+
+  build-nrf52:
+    strategy:
+      fail-fast: false
+      matrix:
+        include: 
+          - board: rak4631_5005
+          - board: rak4631_19003
+          - board: t-echo
+    
+    runs-on: ubuntu-latest
+    steps:
+
+    - name: Checkout code
+      uses: actions/checkout@v2
+      with:
+        submodules: 'recursive'
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
+
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v1
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio meshtastic adafruit-nrfutil
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+    - name: Build NRF52
+      run: bin/build-nrf52.sh ${{ matrix.board }}
+
+    - name: Get release version string
+      run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+      id: version
+
+    - name: Store binaries as an artifact
+      uses: actions/upload-artifact@v2
+      with:
+        name: firmware-${{ matrix.board }}-${{ steps.version.outputs.version }}.zip
+        path: |
+          release/*.uf2
+          release/*.elf
+        retention-days: 90
+
+  build-native:
+    runs-on: ubuntu-latest
+    steps:
+
+    - name: Checkout code
+      uses: actions/checkout@v2
+      with:
+        submodules: 'recursive'
+        ref: ${{github.event.pull_request.head.ref}}
+        repository: ${{github.event.pull_request.head.repo.full_name}}
+
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+
+    - name: Cache python libs
+      uses: actions/cache@v1
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
+
+    - name: Upgrade python tools
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio meshtastic adafruit-nrfutil
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+    # We now run integration test before other build steps (to quickly see runtime failures)
+    - name: Build for native
+      run: platformio run -e native
+    - name: Integration test
+      run: |
+        .pio/build/native/program &
+        sleep 20 # 5 seconds was not enough
+        echo "Simulator started, launching python test..."
+        python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+    - name: Build Native
+      run: bin/build-native.sh
+
+    - name: Get release version string
+      run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+      id: version
+
+    - name: Store binaries as an artifact
+      uses: actions/upload-artifact@v2
+      with:
+        name: firmware-native-${{ steps.version.outputs.version }}.zip
+        path: | 
+          release/meshtasticd_linux_amd64
+          release/device-*.sh
+          release/device-*.bat
+        retention-days: 90
+
+  gather-artifacts:
+    runs-on: ubuntu-latest
+    needs: [build-esp32, build-nrf52, build-native]
+    steps:
+
+      - name: Checkout code
+        uses: actions/checkout@v2
         with:
-          python-version: 3.x
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v2
+        with:
+          path: ./
 
       - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
         id: version
 
-      - uses: actions/download-artifact@v4
+      - name: Move files up
+        run: mv -b -t ./ ./*tbeam-*/spiffs*.bin ./*tbeam-*/system-info.bin ./**/firmware*.bin ./**/*.uf2 ./**/*.elf ./**/meshtasticd_linux_amd64 ./*native*/*device-*.sh ./*native*/*device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v2
         with:
-          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
-          merge-multiple: true
+          name: firmware-${{ steps.version.outputs.version }}
+          path: | 
+            ./*.bin
+            ./*.uf2
+            ./meshtasticd_linux_amd64
+            ./device-*.sh
+            ./device-*.bat
+          retention-days: 90
+
+      - uses: actions/download-artifact@v2
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
           path: ./output
 
-      - name: Display structure of downloaded files
+      # For diagnostics
+      - name: Show artifacts 
         run: ls -lR
 
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
+        run: zip -j -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
-      - uses: actions/download-artifact@v4
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v2
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
-          gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware]
-    env:
-      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          path: ./*.elf
+          retention-days: 90
+          
+      - name: Create request artifacts
+        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+        uses: gavv/pull-request-artifacts@v1.0.0
         with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ steps.version.outputs.long }}
-          enable_jekyll: true
+          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          artifacts-repo: meshtastic/artifacts
+          artifacts-branch: device
+          artifacts-dir: pr
+          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip

.github/workflows/nightly.yml

@@ -1,37 +0,0 @@
-name: Nightly
-on:
-  schedule:
-    - cron: 0 8 * * 1-5
-  workflow_dispatch: {}
-
-permissions: read-all
-
-jobs:
-  trunk_check:
-    name: Trunk Check and Upload
-    runs-on: ubuntu-24.04
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
-        with:
-          trunk-token: ${{ secrets.TRUNK_TOKEN }}
-
-  trunk_upgrade:
-    # See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
-    name: Trunk Upgrade (PR)
-    runs-on: ubuntu-24.04
-    permissions:
-      contents: write # For trunk to create PRs
-      pull-requests: write # For trunk to create PRs
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Trunk Upgrade
-        uses: trunk-io/trunk-action/upgrade@v1
-        with:
-          base: master

.github/workflows/package_obs.yml

@@ -1,110 +0,0 @@
-name: Package for OpenSUSE Build Service
-
-on:
-  workflow_call:
-    secrets:
-      OBS_PASSWORD:
-        required: true
-      PPA_GPG_PRIVATE_KEY:
-        required: true
-    inputs:
-      obs_project:
-        description: Meshtastic OBS project to target
-        required: true
-        type: string
-      series:
-        description: Debian series to target
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-debian-src:
-    uses: ./.github/workflows/build_debian_src.yml
-    secrets: inherit
-    with:
-      series: ${{ inputs.series }}
-      build_location: obs
-
-  package-obs:
-    runs-on: ubuntu-24.04
-    needs: build-debian-src
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install OpenSUSE Build Service deps
-        shell: bash
-        run: |
-          echo 'deb http://download.opensuse.org/repositories/openSUSE:/Tools/xUbuntu_24.04/ /' | sudo tee /etc/apt/sources.list.d/openSUSE:Tools.list
-          curl -fsSL https://download.opensuse.org/repositories/openSUSE:Tools/xUbuntu_24.04/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/openSUSE_Tools.gpg > /dev/null
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y osc
-
-      - name: Get release version string
-        working-directory: meshtasticd
-        run: |
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        env:
-          BUILD_LOCATION: obs
-        id: version
-
-      - name: Download artifacts
-        uses: actions/download-artifact@v4
-        with:
-          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -lah
-
-      - name: Configure osc
-        env:
-          OBS_USERNAME: meshtastic
-        run: |
-          # Setup OpenSUSE Build Service credentials
-          mkdir -p ~/.config/osc
-          echo "[general]" > ~/.config/osc/oscrc
-          echo "apiurl=https://api.opensuse.org" >> ~/.config/osc/oscrc
-          echo "[https://api.opensuse.org]" >> ~/.config/osc/oscrc
-          echo "user=${{ env.OBS_USERNAME }}" >> ~/.config/osc/oscrc
-          echo "pass=${{ secrets.OBS_PASSWORD }}" >> ~/.config/osc/oscrc
-          echo "credentials_mgr_class=osc.credentials.PlaintextConfigFileCredentialsManager" >> ~/.config/osc/oscrc
-          # Create a temporary directory for osc checkout
-          mkdir -p osc
-
-      # Intentionally fail if credentials are invalid
-      # Update secrets if this returns `401`
-      - name: Verify OBS authentication
-        run: osc token
-
-      - name: Upload package to OBS
-        shell: bash
-        working-directory: osc
-        env:
-          OBS_PROJECT: ${{ inputs.obs_project }}
-          OBS_PACKAGE: meshtasticd
-        run: |
-          # Initialize the package in the current directory
-          osc checkout --output-dir . $OBS_PROJECT $OBS_PACKAGE
-
-          # Remove the existing package files
-          rm -rf *.dsc *.tar.xz
-
-          # Copy new package files to the directory
-          cp $GITHUB_WORKSPACE/*.dsc .
-          cp $GITHUB_WORKSPACE/*.tar.xz .
-
-          # Add/Remove the files
-          osc addremove
-
-          # Commit changes and push to OpenSUSE Build Service
-          osc commit -m "GitHub Actions: ${{ steps.version.outputs.deb }}~${{ inputs.series }}"

.github/workflows/package_pio_deps.yml

@@ -1,65 +0,0 @@
-name: Package PlatformIO Library Dependencies
-# trunk-ignore-all(checkov/CKV_GHA_7): Allow workflow_dispatch inputs for testing
-
-on:
-  workflow_call:
-    inputs:
-      pio_env:
-        description: PlatformIO environment to target
-        required: true
-        type: string
-  workflow_dispatch:
-    inputs:
-      pio_env:
-        description: PlatformIO environment to target
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  pkg-pio-libdeps:
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Install deps
-        shell: bash
-        run: |
-          pip install platformio
-
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Fetch libdeps
-        shell: bash
-        run: |-
-          platformio pkg install -e ${{ inputs.pio_env }}
-          platformio pkg install -e ${{ inputs.pio_env }} -t platformio/tool-scons@4.40502.0
-        env:
-          PLATFORMIO_LIBDEPS_DIR: pio/libdeps
-          PLATFORMIO_PACKAGES_DIR: pio/packages
-          PLATFORMIO_CORE_DIR: pio/core
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
-          overwrite: true
-          include-hidden-files: true
-          path: |
-            pio/*

.github/workflows/package_ppa.yml

@@ -1,74 +0,0 @@
-name: Package for Launchpad PPA
-
-on:
-  workflow_call:
-    secrets:
-      PPA_GPG_PRIVATE_KEY:
-        required: true
-    inputs:
-      ppa_repo:
-        description: Meshtastic PPA to target
-        required: true
-        type: string
-      series:
-        description: Ubuntu series to target
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-debian-src:
-    uses: ./.github/workflows/build_debian_src.yml
-    secrets: inherit
-    with:
-      series: ${{ inputs.series }}
-      build_location: ppa
-
-  package-ppa:
-    runs-on: ubuntu-24.04
-    needs: build-debian-src
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install deps
-        shell: bash
-        run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y dput
-
-      - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v6
-        with:
-          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
-        id: gpg
-
-      - name: Get release version string
-        working-directory: meshtasticd
-        run: |
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        env:
-          BUILD_LOCATION: ppa
-        id: version
-
-      - name: Download artifacts
-        uses: actions/download-artifact@v4
-        with:
-          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -lah
-
-      - name: Publish with dput
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        run: |
-          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes

.github/workflows/release.yml

@@ -0,0 +1,93 @@
+name: Make Release
+on:
+  # Can optionally take parameters from the github UI, more info here https://github.blog/changelog/2020-07-06-github-actions-manual-triggers-with-workflow_dispatch/#:~:text=You%20can%20now%20create%20workflows,the%20workflow%20is%20run%20on.
+  #workflow_dispatch:
+  #  inputs:
+
+  # Only want to run if version.properties is bumped in master
+  push:
+    branches:
+      - 1.2-legacy
+    paths:
+    - 'version.properties'
+
+jobs:
+  release-build:
+    runs-on: ubuntu-latest
+    steps:
+
+    - name: Checkout code
+      uses: actions/checkout@v2
+      with:
+        submodules: 'recursive'
+
+    - name: Setup Python
+      uses: actions/setup-python@v2
+      with:
+        python-version: 3.x
+        
+    # Will be available in steps.version.outputs.version	
+    - name: Get release version string
+      run: echo "::set-output name=version::$(./bin/buildinfo.py long)"
+      id: version
+    # Note: we don't use caches on release builds because we don't want to accidentally not have a virgin build machine
+
+    - name: Upgrade python tools
+      # We actually want to run this every time
+      # if: steps.cache-pip.outputs.cache-hit != 'true'
+      run: |
+        python -m pip install --upgrade pip
+        pip install -U platformio meshtastic adafruit-nrfutil
+
+    - name: Upgrade platformio
+      run: |
+        pio upgrade
+
+    - name: Pull web ui
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: "meshtastic/meshtastic-web"
+        file: "build.tar"
+        target: "build.tar"
+        token: ${{ secrets.GITHUB_TOKEN }}
+
+    - name: Unpack web ui
+      run: |
+        tar -xf build.tar -C data/static
+        rm build.tar
+
+    - name: Build everything
+      run: bin/build-all.sh
+
+    - name: Create release
+      uses: actions/create-release@v1
+      id: create_release
+      with:
+        draft: true
+        prerelease: true
+        release_name: ${{ steps.version.outputs.version }} alpha
+        tag_name: v${{ steps.version.outputs.version }}
+        body: |
+          Autogenerated by github action, developer should edit as required before publishing...
+      env:
+        GITHUB_TOKEN: ${{ github.token }}
+
+    - name: Add bins to release
+      uses: actions/upload-release-asset@v1
+      env:
+        GITHUB_TOKEN: ${{ github.token }}
+      with:
+        upload_url: ${{ steps.create_release.outputs.upload_url }}
+        asset_path: release/archive/firmware-${{ steps.version.outputs.version }}.zip
+        asset_name: firmware-${{ steps.version.outputs.version }}.zip
+        asset_content_type: application/zip
+
+    - name: Add debug elfs to release
+      uses: actions/upload-release-asset@v1
+      env:
+        GITHUB_TOKEN: ${{ github.token }}
+      with:
+        upload_url: ${{ steps.create_release.outputs.upload_url }}
+        asset_path: release/archive/elfs-${{ steps.version.outputs.version }}.zip
+        asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+        asset_content_type: application/zip

.github/workflows/release_channels.yml

@@ -1,106 +0,0 @@
-name: Trigger release workflows upon Publish
-
-on:
-  release:
-    types: [published, released]
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-docker:
-    uses: ./.github/workflows/docker_manifest.yml
-    with:
-      release_channel: |-
-        ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
-    secrets: inherit
-
-  package-ppa:
-    strategy:
-      fail-fast: false
-      matrix:
-        series: [plucky, oracular, noble, jammy]
-    uses: ./.github/workflows/package_ppa.yml
-    with:
-      ppa_repo: |-
-        ppa:meshtastic/${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
-      series: ${{ matrix.series }}
-    secrets: inherit
-
-  package-obs:
-    uses: ./.github/workflows/package_obs.yml
-    with:
-      obs_project: |-
-        network:Meshtastic:${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
-      series: |-
-        ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
-    secrets: inherit
-
-  hook-copr:
-    uses: ./.github/workflows/hook_copr.yml
-    with:
-      copr_project: |-
-        ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
-    secrets: inherit
-
-  # Create a PR to bump version when a release is Published
-  bump-version:
-    if: github.event.action == 'published'
-    runs-on: ubuntu-latest
-    permissions:
-      pull-requests: write
-      contents: write
-    defaults:
-      run:
-        shell: bash
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Bump version.properties
-        run: |
-          # Bump version.properties
-          chmod +x ./bin/bump_version.py
-          ./bin/bump_version.py
-
-      - name: Get new release version string
-        run: |
-          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
-        id: new_version
-
-      - name: Ensure debian deps are installed
-        run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y devscripts
-
-      - name: Update debian changelog
-        run: |
-          # Update debian changelog
-          chmod +x ./debian/ci_changelog.sh
-          ./debian/ci_changelog.sh
-
-      - name: Bump org.meshtastic.meshtasticd.metainfo.xml
-        run: |
-          # Bump org.meshtastic.meshtasticd.metainfo.xml
-          pip install -r bin/bump_metainfo/requirements.txt -q
-          chmod +x ./bin/bump_metainfo/bump_metainfo.py
-          ./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.new_version.outputs.short }}"
-        env:
-          PIP_DISABLE_PIP_VERSION_CHECK: 1
-
-      - name: Create Bumps pull request
-        uses: peter-evans/create-pull-request@v7
-        with:
-          base: ${{ github.event.repository.default_branch }}
-          title: Bump release version
-          commit-message: automated bumps
-          add-paths: |
-            version.properties
-            debian/changelog
-            bin/org.meshtastic.meshtasticd.metainfo.xml

.github/workflows/sec_sast_semgrep_cron.yml

@@ -1,46 +0,0 @@
----
-name: Semgrep Full Scan
-
-on:
-  workflow_dispatch:
-  schedule:
-    - cron: 0 1 * * 6
-
-permissions:
-  actions: read
-  contents: read
-  security-events: write
-
-jobs:
-  semgrep-full:
-    runs-on: ubuntu-24.04
-    container:
-      image: semgrep/semgrep
-
-    steps:
-      # step 1
-      - name: clone application source code
-        uses: actions/checkout@v4
-
-      # step 2
-      - name: full scan
-        run: |
-          semgrep \
-            --sarif --output report.sarif \
-            --metrics=off \
-            --config="p/default"
-
-      # step 3
-      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: report.sarif
-          overwrite: true
-          path: report.sarif
-
-      # step 4
-      - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v3
-        with:
-          sarif_file: report.sarif
-          category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -1,27 +0,0 @@
----
-name: Semgrep Differential Scan
-on: pull_request
-
-permissions: read-all
-
-jobs:
-  semgrep-diff:
-    runs-on: ubuntu-24.04
-    container:
-      image: semgrep/semgrep
-
-    steps:
-      # step 1
-      - name: clone application source code
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      # step 2
-      - name: differential scan
-        run: |
-          semgrep scan \
-            --error \
-            --metrics=off \
-            --baseline-commit ${{ github.event.pull_request.base.sha }} \
-            --config="p/default"

.github/workflows/stale_bot.yml

@@ -1,23 +0,0 @@
-name: process stale Issues and PR's
-on:
-  schedule:
-    - cron: 0 6 * * *
-  workflow_dispatch: {}
-
-permissions:
-  issues: write
-  pull-requests: write
-  actions: write
-
-jobs:
-  stale_issues:
-    name: Close Stale Issues
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Stale PR+Issues
-        uses: actions/stale@v9.1.0
-        with:
-          days-before-stale: 45
-          exempt-issue-labels: pinned,3.0
-          exempt-pr-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -1,169 +0,0 @@
-name: Run Tests on Native platform
-
-on:
-  workflow_call:
-  workflow_dispatch:
-
-permissions: {}
-
-env:
-  LCOV_CAPTURE_FLAGS: --quiet --capture --include "${PWD}/src/*" --exclude '*/src/mesh/generated/*' --directory .pio/build/coverage/src --base-directory "${PWD}"
-
-jobs:
-  simulator-tests:
-    name: Native Simulator Tests
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-          submodules: recursive
-
-      - name: Setup native build
-        id: base
-        uses: ./.github/actions/setup-native
-
-      - name: Install simulator dependencies
-        run: pip install -U dotmap
-
-      # We now run integration test before other build steps (to quickly see runtime failures)
-      - name: Build for native/coverage
-        run: platformio run -e coverage
-
-      - name: Capture initial coverage information
-        shell: bash
-        run: |
-          sudo apt-get install -y lcov
-          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --initial --output-file coverage_base.info
-          sed -i -e "s#${PWD}#.#" coverage_base.info # Make paths relative.
-
-      - name: Integration test
-        run: |
-          .pio/build/coverage/program &
-          PID=$!
-          timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
-          echo "Simulator started, launching python test..."
-          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
-          wait
-
-      - name: Capture coverage information
-        if: always() # run this step even if previous step failed
-        run: |
-          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name integration --output-file coverage_integration.info
-          sed -i -e "s#${PWD}#.#" coverage_integration.info # Make paths relative.
-
-      - name: Get release version string
-        if: always() # run this step even if previous step failed
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Save coverage information
-        uses: actions/upload-artifact@v4
-        if: always() # run this step even if previous step failed
-        with:
-          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: ./coverage_*.info
-
-  platformio-tests:
-    name: Native PlatformIO Tests
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-          submodules: recursive
-
-      - name: Setup native build
-        id: base
-        uses: ./.github/actions/setup-native
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      # Disable (comment-out) BUILD_EPOCH. It causes a full rebuild between tests and resets the
-      # coverage information each time.
-      - name: Disable BUILD_EPOCH
-        run: sed -i 's/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
-      - name: PlatformIO Tests
-        run: platformio test -e coverage -v --junit-output-path testreport.xml
-
-      - name: Save test results
-        if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v4
-        with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: ./testreport.xml
-
-      - name: Capture coverage information
-        if: always() # run this step even if previous step failed
-        run: |
-          sudo apt-get install -y lcov
-          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name tests --output-file coverage_tests.info
-          sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
-
-      - name: Save coverage information
-        uses: actions/upload-artifact@v4
-        if: always() # run this step even if previous step failed
-        with:
-          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: ./coverage_*.info
-
-  generate-reports:
-    name: Generate Test Reports
-    runs-on: ubuntu-latest
-    permissions: # Needed for dorny/test-reporter.
-      contents: read
-      actions: read
-      checks: write
-    needs:
-      - simulator-tests
-      - platformio-tests
-    if: always()
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Download test artifacts
-        uses: actions/download-artifact@v4
-        with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
-          merge-multiple: true
-
-      - name: Test Report
-        uses: dorny/test-reporter@v2.1.0
-        with:
-          name: PlatformIO Tests
-          path: testreport.xml
-          reporter: java-junit
-
-      - name: Download coverage artifacts
-        uses: actions/download-artifact@v4
-        with:
-          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
-          path: code-coverage-report
-          merge-multiple: true
-
-      - name: Generate Code Coverage Report
-        run: |
-          sudo apt-get install -y lcov
-          lcov --quiet --add-tracefile code-coverage-report/coverage_base.info --add-tracefile code-coverage-report/coverage_integration.info --add-tracefile code-coverage-report/coverage_tests.info --output-file code-coverage-report/coverage_src.info
-          genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
-
-      - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v4
-        with:
-          name: code-coverage-report-${{ steps.version.outputs.long }}.zip
-          path: code-coverage-report

.github/workflows/tests.yml

@@ -1,64 +0,0 @@
-name: End to end tests
-
-on:
-  schedule:
-    - cron: 0 0 * * * # Run every day at midnight
-  workflow_dispatch: {}
-
-permissions:
-  contents: read
-  actions: read
-  checks: write
-
-jobs:
-  native-tests:
-    uses: ./.github/workflows/test_native.yml
-
-  hardware-tests:
-    runs-on: test-runner
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-
-      # - uses: actions/setup-python@v5
-      #   with:
-      #     python-version: '3.10'
-
-      # pipx install "setuptools<72"
-      - name: Upgrade python tools
-        shell: bash
-        run: |
-          pipx install adafruit-nrfutil
-          pipx install poetry
-          pipx install meshtastic --pip-args=--pre
-
-      - name: Install PlatformIO from script
-        shell: bash
-        run: |
-          curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
-          python3 get-platformio.py
-
-      - name: Upgrade platformio
-        shell: bash
-        run: |
-          export PATH=$PATH:$HOME/.local/bin
-          pio upgrade
-
-      - name: Setup Node
-        uses: actions/setup-node@v4
-        with:
-          node-version: 22
-
-      - name: Setup pnpm
-        uses: pnpm/action-setup@v4
-        with:
-          version: latest
-
-      - name: Install dependencies, setup devices and run
-        shell: bash
-        run: |
-          git submodule update --init --recursive
-          cd meshtestic/
-          pnpm install
-          pnpm run setup
-          pnpm run test

.github/workflows/trunk_annotate_pr.yml

@@ -1,26 +0,0 @@
-name: Annotate PR with trunk issues
-# See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#getting-inline-annotations-for-fork-prs
-
-on:
-  workflow_run:
-    workflows: [Pull Request] # Name from `trunk_check.yml`
-    types: [completed]
-
-permissions: read-all
-
-jobs:
-  trunk_check:
-    name: Trunk Code Quality Annotate
-    runs-on: ubuntu-24.04
-    permissions:
-      checks: write # For trunk to post annotations
-      contents: read # For repo checkout
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
-        with:
-          post-annotations: true

.github/workflows/trunk_check.yml

@@ -1,24 +0,0 @@
-name: Pull Request
-on: [pull_request]
-concurrency:
-  group: ${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-permissions: read-all
-
-jobs:
-  trunk_check:
-    name: Trunk Check Runner
-    runs-on: ubuntu-24.04
-    permissions:
-      checks: write # For trunk to post annotations
-      contents: read # For repo checkout
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
-        with:
-          save-annotations: true

.github/workflows/trunk_format_pr.yml

@@ -1,51 +0,0 @@
-name: Run Trunk Fmt on PR Comment
-
-on:
-  issue_comment:
-    types: [created]
-
-permissions: read-all
-
-jobs:
-  trunk-fmt:
-    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-      pull-requests: write
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Run Trunk Fmt
-        run: trunk fmt
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Commit and push changes
-        run: |
-          git config --global user.name "github-actions[bot]"
-          git config --global user.email "github-actions[bot]@users.noreply.github.com"
-          git add .
-          git commit -m "Add firmware version ${{ steps.version.outputs.long }}"
-          git push
-
-      - name: Comment on PR
-        uses: actions/github-script@v7
-        with:
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-          script: |
-            github.issues.createComment({
-              issue_number: context.issue.number,
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              body: '`trunk fmt` has been run on this PR.'
-            })

.github/workflows/update_protobufs.yml

@@ -1,39 +1,33 @@
-name: Update protobufs and regenerate classes
+name: "Update protobufs and regenerate classes"
 on: workflow_dispatch
 
-permissions: read-all
-
 jobs:
   update-protobufs:
     runs-on: ubuntu-latest
-    permissions:
-      contents: write
-      pull-requests: write
+
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v2
         with:
           submodules: true
 
       - name: Update submodule
-        if: ${{ github.ref == 'refs/heads/master' }}
         run: |
-          git submodule update --remote protobufs
-
+          git submodule update --remote proto
+          
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9.1-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.9.1-linux-x86.tar.gz
-          mv nanopb-0.4.9.1-linux-x86 nanopb-0.4.9
-
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.4-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.4-linux-x86.tar.gz
+          mv nanopb-0.4.4-linux-x86 nanopb-0.4.4
+          
       - name: Re-generate protocol buffers
         run: |
-          ./bin/regen-protos.sh
-
+          ./bin/regen-protos.sh  
+          
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v3
         with:
-          title: Update protobufs and classes
           add-paths: |
-            protobufs
+            proto
             src/mesh

.gitignore

@@ -1,8 +1,6 @@
 .pio
-pio
-pio.tar
-web
-web.tar
+main/configuration.h
+main/credentials.h
 
 # ignore vscode IDE settings files
 .vscode/*
@@ -12,9 +10,6 @@ web.tar
 *.code-workspace
 
 .idea
-.platformio
-.local
-.cache
 
 .DS_Store
 Thumbs.db
@@ -35,6 +30,3 @@ __pycache__
 venv/
 release/
 .vscode/extensions.json
-/compile_commands.json
-src/mesh/raspihttp/certificate.pem
-src/mesh/raspihttp/private_key.pem

.gitlab-ci.yml

@@ -0,0 +1,50 @@
+image: python:latest
+
+variables:
+  # make sure GitLab check out submodules
+  GIT_SUBMODULE_STRATEGY: recursive
+
+stages:
+  - buildall
+  - upload
+
+build:
+  stage: buildall
+
+  before_script:
+    # we need zip later for packaging
+    - "apt update;apt -y install zip"
+    - "pip install -U platformio"
+
+  script:
+    # clean up residues from previous run
+    - rm -rf release
+    - bin/build-all.sh
+
+  # This is for my local environment, if your runners are tagged differently, modify or remove  
+  tags:
+    - dockerized
+
+  # The files which are to be made available in GitLab
+  artifacts:
+    paths:
+      - release/archive/firmware*.zip
+
+
+upload:
+  image: curlimages/curl:latest
+
+  stage: upload
+
+  script:
+    - |
+      PACKAGE_REGISTRY_URL="${CI_API_V4_URL}/projects/${CI_PROJECT_ID}/packages/generic/${CI_PROJECT_NAME}/master"
+      cd release/archive
+      for f in *.zip; do
+      curl --header "JOB-TOKEN: ${CI_JOB_TOKEN}" --upload-file ${f} ${PACKAGE_REGISTRY_URL}/${f}
+      done
+      echo 'Package uploaded!'
+      
+  # This is for my local environment, if your runners are tagged differently, modify or remove
+  tags:
+    - dockerized  

.gitmodules

@@ -1,6 +1,10 @@
-[submodule "protobufs"]
-	path = protobufs
-	url = https://github.com/meshtastic/protobufs.git
-[submodule "meshtestic"]
-	path = meshtestic
-	url = https://github.com/meshtastic/meshTestic
+[submodule "proto"]
+	path = proto
+	url = https://github.com/meshtastic/Meshtastic-protobufs.git
+	branch = 1.2-legacy
+[submodule "sdk-nrfxlib"]
+	path = sdk-nrfxlib
+	url = https://github.com/nrfconnect/sdk-nrfxlib.git
+[submodule "design"]
+	path = design
+	url = https://github.com/meshtastic/meshtastic-design.git

.gitpod.yml

@@ -1,2 +0,0 @@
-tasks:
-  - init: pip install platformio && pip install --upgrade pip

.semgrepignore

@@ -1,2 +0,0 @@
-.github/workflows/main_matrix.yml
-src/mesh/compression/unishox2.cpp

.trunk/.gitignore

@@ -1,9 +0,0 @@
-*out
-*logs
-*actions
-*notifications
-*tools
-plugins
-user_trunk.yaml
-user.yaml
-tmp

.trunk/configs/.bandit

@@ -1,2 +0,0 @@
-[bandit]
-skips = B101

.trunk/configs/.flake8

@@ -1,3 +0,0 @@
-# Autoformatter friendly flake8 config (all formatting rules disabled)
-[flake8]
-extend-ignore = D1, D2, E1, E2, E3, E501, W1, W2, W3, W5

.trunk/configs/.hadolint.yaml

@@ -1,4 +0,0 @@
-# Following source doesn't work in most setups
-ignored:
-  - SC1090
-  - SC1091

.trunk/configs/.isort.cfg

@@ -1,2 +0,0 @@
-[settings]
-profile=black

.trunk/configs/.markdownlint.yaml

@@ -1,11 +0,0 @@
-# Autoformatter friendly markdownlint config (all formatting rules disabled)
-default: true
-blank_lines: false
-bullet: false
-html: false
-indentation: false
-line_length: false
-spaces: false
-url: false
-whitespace: false
-headings: false

.trunk/configs/.prettierignore

@@ -1 +0,0 @@
-renovate.json

.trunk/configs/.prettierrc

@@ -1,10 +0,0 @@
-{
-  "overrides": [
-    {
-      "files": "userPrefs.jsonc",
-      "options": {
-        "trailingComma": "none"
-      }
-    }
-  ]
-}

.trunk/configs/.shellcheckrc

@@ -1,10 +0,0 @@
-enable=all
-source-path=SCRIPTDIR
-disable=SC2154
-disable=SC2248
-disable=SC2250
-
-# If you're having issues with shellcheck following source, disable the errors via:
-# disable=SC1090
-# disable=SC1091
-# 

.trunk/configs/.yamllint.yaml

@@ -1,10 +0,0 @@
-rules:
-  quoted-strings:
-    required: only-when-needed
-    extra-allowed: ["{|}"]
-  empty-values:
-    forbid-in-block-mappings: false
-    forbid-in-flow-mappings: true
-  key-duplicates: {}
-  octal-values:
-    forbid-implicit-octal: true

.trunk/configs/ruff.toml

@@ -1,5 +0,0 @@
-# Generic, formatter-friendly config.
-select = ["B", "D3", "D4", "E", "F"]
-
-# Never enforce `E501` (line length violations). This should be handled by formatters.
-ignore = ["E501"]

.trunk/configs/svgo.config.js

@@ -1,14 +0,0 @@
-module.exports = {
-  plugins: [
-    {
-      name: "preset-default",
-      params: {
-        overrides: {
-          removeViewBox: false, // https://github.com/svg/svgo/issues/1128
-          sortAttrs: true,
-          removeOffCanvasPaths: true,
-        },
-      },
-    },
-  ],
-};

.trunk/trunk.yaml

@@ -1,48 +0,0 @@
-version: 0.1
-cli:
-  version: 1.24.0
-plugins:
-  sources:
-    - id: trunk
-      ref: v1.7.0
-      uri: https://github.com/trunk-io/plugins
-lint:
-  enabled:
-    - checkov@3.2.435
-    - renovate@40.34.4
-    - prettier@3.5.3
-    - trufflehog@3.88.34
-    - yamllint@1.37.1
-    - bandit@1.8.3
-    - trivy@0.62.1
-    - taplo@0.9.3
-    - ruff@0.11.11
-    - isort@6.0.1
-    - markdownlint@0.45.0
-    - oxipng@9.1.5
-    - svgo@3.3.2
-    - actionlint@1.7.7
-    - flake8@7.2.0
-    - hadolint@2.12.1-beta
-    - shfmt@3.6.0
-    - shellcheck@0.10.0
-    - black@25.1.0
-    - git-diff-check
-    - gitleaks@8.26.0
-    - clang-format@16.0.3
-  ignore:
-    - linters: [ALL]
-      paths:
-        - bin/**
-runtimes:
-  enabled:
-    - python@3.10.8
-    - go@1.21.0
-    - node@22.16.0
-actions:
-  disabled:
-    - trunk-announce
-  enabled:
-    - trunk-fmt-pre-commit
-    - trunk-check-pre-push
-    - trunk-upgrade-available

.vscode/extensions.json

@@ -1,10 +1,8 @@
-{
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
-    "recommendations": [
-        "platformio.platformio-ide"
-    ],
-    "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
-    ]
-}
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide",
+        "xaver.clang-format"
+    ]
+}

.vscode/settings.json

@@ -1,68 +1,82 @@
 {
-  "editor.formatOnSave": true,
-  "editor.defaultFormatter": "trunk.io",
-  "trunk.enableWindows": true,
-  "files.insertFinalNewline": false,
-  "files.trimFinalNewlines": false,
-  "cmake.configureOnOpen": false,
-  "[cpp]": {
-    "editor.defaultFormatter": "trunk.io"
-  },
-  "[powershell]": {
-    "editor.defaultFormatter": "ms-vscode.powershell"
-  },
-  "files.associations": {
-    "array": "cpp",
-    "atomic": "cpp",
-    "*.tcc": "cpp",
-    "cctype": "cpp",
-    "clocale": "cpp",
-    "cmath": "cpp",
-    "csignal": "cpp",
-    "cstdarg": "cpp",
-    "cstddef": "cpp",
-    "cstdint": "cpp",
-    "cstdio": "cpp",
-    "cstdlib": "cpp",
-    "cstring": "cpp",
-    "ctime": "cpp",
-    "cwchar": "cpp",
-    "cwctype": "cpp",
-    "deque": "cpp",
-    "list": "cpp",
-    "unordered_map": "cpp",
-    "unordered_set": "cpp",
-    "vector": "cpp",
-    "exception": "cpp",
-    "algorithm": "cpp",
-    "functional": "cpp",
-    "iterator": "cpp",
-    "map": "cpp",
-    "memory": "cpp",
-    "memory_resource": "cpp",
-    "numeric": "cpp",
-    "optional": "cpp",
-    "random": "cpp",
-    "string": "cpp",
-    "string_view": "cpp",
-    "system_error": "cpp",
-    "tuple": "cpp",
-    "type_traits": "cpp",
-    "utility": "cpp",
-    "fstream": "cpp",
-    "initializer_list": "cpp",
-    "iomanip": "cpp",
-    "iosfwd": "cpp",
-    "iostream": "cpp",
-    "istream": "cpp",
-    "limits": "cpp",
-    "new": "cpp",
-    "ostream": "cpp",
-    "sstream": "cpp",
-    "stdexcept": "cpp",
-    "streambuf": "cpp",
-    "cinttypes": "cpp",
-    "typeinfo": "cpp",
-    "*.xbm": "cpp"
-  }
-}
+    "files.associations": {
+        "type_traits": "cpp",
+        "array": "cpp",
+        "*.tcc": "cpp",
+        "cctype": "cpp",
+        "clocale": "cpp",
+        "cmath": "cpp",
+        "cstdarg": "cpp",
+        "cstddef": "cpp",
+        "cstdint": "cpp",
+        "cstdio": "cpp",
+        "cstdlib": "cpp",
+        "cstring": "cpp",
+        "ctime": "cpp",
+        "cwchar": "cpp",
+        "cwctype": "cpp",
+        "deque": "cpp",
+        "unordered_map": "cpp",
+        "unordered_set": "cpp",
+        "vector": "cpp",
+        "exception": "cpp",
+        "algorithm": "cpp",
+        "functional": "cpp",
+        "system_error": "cpp",
+        "tuple": "cpp",
+        "fstream": "cpp",
+        "initializer_list": "cpp",
+        "iomanip": "cpp",
+        "iosfwd": "cpp",
+        "istream": "cpp",
+        "limits": "cpp",
+        "memory": "cpp",
+        "new": "cpp",
+        "ostream": "cpp",
+        "numeric": "cpp",
+        "sstream": "cpp",
+        "stdexcept": "cpp",
+        "streambuf": "cpp",
+        "cinttypes": "cpp",
+        "utility": "cpp",
+        "typeinfo": "cpp",
+        "string": "cpp",
+        "*.xbm": "cpp",
+        "list": "cpp",
+        "atomic": "cpp",
+        "memory_resource": "cpp",
+        "optional": "cpp",
+        "string_view": "cpp",
+        "cassert": "cpp",
+        "iterator": "cpp",
+        "shared_mutex": "cpp",
+        "iostream": "cpp",
+        "esp_nimble_hci.h": "c"
+    },
+    "cSpell.words": [
+        "Blox",
+        "EINK",
+        "HFSR",
+        "Meshtastic",
+        "NEMAGPS",
+        "NMEAGPS",
+        "RDEF",
+        "Ublox",
+        "bkpt",
+        "cfsr",
+        "descs",
+        "ocrypto",
+        "protobufs",
+        "wifi"
+    ],
+    "C_Cpp.dimInactiveRegions": true,
+    "cmake.configureOnOpen": true,
+    "protoc": {
+        "compile_on_save": false,
+        "compile_all_path": "/home/kevinh/development/meshtastic/meshtastic-esp32/proto",
+        "options": [
+            "--java_out=/tmp",
+            "-I=/home/kevinh/development/meshtastic/meshtastic-esp32/proto"
+        ]
+    }
+}

.vscode/tasks.json

@@ -1,15 +1,17 @@
 {
-  "version": "2.0.0",
-  "tasks": [
-    {
-      "type": "PlatformIO",
-      "task": "Build",
-      "problemMatcher": ["$platformio"],
-      "group": {
-        "kind": "build",
-        "isDefault": true
-      },
-      "label": "PlatformIO: Build"
-    }
-  ]
-}
+	"version": "2.0.0",
+	"tasks": [
+		{
+			"type": "PlatformIO",
+			"task": "Build",
+			"problemMatcher": [
+				"$platformio"
+			],
+			"group": {
+				"kind": "build",
+				"isDefault": true
+			},
+			"label": "PlatformIO: Build"
+		}
+	]
+}

CMakeLists.txt

@@ -0,0 +1,36 @@
+# !!! WARNING !!! AUTO-GENERATED FILE, PLEASE DO NOT MODIFY IT AND USE
+# https://docs.platformio.org/page/projectconf/section_env_build.html#build-flags
+#
+# If you need to override existing CMake configuration or add extra,
+# please create `CMakeListsUser.txt` in the root of project.
+# The `CMakeListsUser.txt` will not be overwritten by PlatformIO.
+
+cmake_minimum_required(VERSION 3.13)
+set(CMAKE_SYSTEM_NAME Generic)
+set(CMAKE_C_COMPILER_WORKS 1)
+set(CMAKE_CXX_COMPILER_WORKS 1)
+
+project("meshtastic-esp32" C CXX)
+
+include(CMakeListsPrivate.txt)
+
+if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/CMakeListsUser.txt)
+include(CMakeListsUser.txt)
+endif()
+
+include_directories("$ENV{HOME}/.platformio/packages/framework-portduino")
+include_directories("/usr/include")
+
+add_custom_target(
+    Production ALL
+    COMMAND platformio -c clion run "$<$<NOT:$<CONFIG:All>>:-e${CMAKE_BUILD_TYPE}>"
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+)
+
+add_custom_target(
+    Debug ALL
+    COMMAND platformio -c clion run --target debug "$<$<NOT:$<CONFIG:All>>:-e${CMAKE_BUILD_TYPE}>"
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
+)
+
+add_executable(Z_DUMMY_TARGET ${SRC_LIST})

CODE_OF_CONDUCT.md

@@ -1,4 +0,0 @@
-# Contributor Covenant Code of Conduct
-
-The Meshtastic Firmware project is subject to the code of conduct for the parent project, which can be found here:
-https://meshtastic.org/docs/legal/conduct/

CONTRIBUTING.md

@@ -1,47 +0,0 @@
-# Contributing to Meshtastic Firmware
-
-We're excited that you're interested in contributing to the Meshtastic firmware! This document provides a high-level overview of how you can get involved.
-
-## Important First Steps
-
-Before you begin, please:
-
-1. **Read our documentation**: Our [official documentation](https://meshtastic.org/docs/) is a crucial resource. It contains essential information about the project.
-
-2. **Check out the firmware build guide**: For specific instructions on setting up your development environment and building the firmware, refer to our [Firmware Build Guide](https://meshtastic.org/docs/development/firmware/build/).
-
-3. Read our [Code of Conduct](https://meshtastic.org/docs/legal/conduct/)
-
-4. Join our [Discord community](https://discord.com/invite/ktMAKGBnBs) to connect with developers and other contributors to get help.
-
-## Getting Help and Discussing Ideas
-
-We encourage open communication and discussion before diving into code changes:
-
-1. **Use GitHub Discussions**: For new ideas, questions, or to discuss potential changes, start a conversation in our [GitHub Discussions](https://github.com/meshtastic/firmware/discussions) first. This helps us collaborate and avoid duplicate work.
-
-2. **Join our Discord**: For real-time chat and quick questions, join our [Discord server](https://discord.com/invite/ktMAKGBnBs). It's a great place to get help and connect with other developers and the community.
-
-3. **Reporting Issues**: If you've identified a bug, please use our bug report template when creating a new issue in the [issue tracker](https://github.com/meshtastic/firmware/issues). Ensure you've searched existing issues to avoid duplicates.
-
-## Making Contributions
-
-> [!IMPORTANT]
-> Before making any contributions, you must sign our Contributor License Agreement (CLA). You can do this by visiting https://cla-assistant.io/meshtastic/firmware. Be sure to use the GitHub account you will use to submit your contributions when signing.
-
-1. Fork the repository
-2. Create a new branch for your feature or bug fix
-3. Make your changes
-4. Test your changes thoroughly
-5. Create a pull request with a clear description, using the provided template, of your changes. Be sure to enable "Allow edits from maintainers".
-
-## Coding Standards
-
-To ensure consistent code formatting across the project:
-
-1. Install the [Trunk](https://marketplace.visualstudio.com/items?itemName=Trunk.io) extension for Visual Studio Code.
-2. Before submitting your changes, run `trunk fmt` to automatically format your code according to our standards.
-
-Adhering to these formatting guidelines helps maintain code consistency and makes the review process smoother.
-
-Thank you for contributing to Meshtastic!

Dockerfile

@@ -1,78 +1,16 @@
-# trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
-# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
+FROM ubuntu
+MAINTAINER Kevin Hester <kevinh@geeksville.com>
 
-FROM python:3.13-bookworm AS builder
-ARG PIO_ENV=native
-ENV DEBIAN_FRONTEND=noninteractive
-ENV TZ=Etc/UTC
+RUN apt-get update
+RUN DEBIAN_FRONTEND=noninteractive TZ=Etc/UTC apt-get -y install wget python3 g++ zip python3-venv git vim
+RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py -O get-platformio.py; chmod +x get-platformio.py
+RUN python3 get-platformio.py
+RUN git clone https://github.com/meshtastic/Meshtastic-device.git
+RUN cd Meshtastic-device; git submodule update --init --recursive
+# only build the simulator
+RUN sed -i 's/^BOARDS_ESP32.*/BOARDS_ESP32=""/' Meshtastic-device/bin/build-all.sh
+RUN sed -i 's/^BOARDS_NRF52.*/BOARDS_NRF52=""/' Meshtastic-device/bin/build-all.sh
+RUN sed -i 's/echo "Building SPIFFS.*/exit/' Meshtastic-device/bin/build-all.sh
+RUN . ~/.platformio/penv/bin/activate; cd Meshtastic-device; ./bin/build-all.sh
 
-# Install Dependencies
-ENV PIP_ROOT_USER_ACTION=ignore
-RUN apt-get update && apt-get install --no-install-recommends -y \
-        curl wget g++ zip git ca-certificates pkg-config \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
-        libx11-dev libinput-dev libxkbcommon-x11-dev \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && pip install --no-cache-dir -U platformio \
-    && mkdir /tmp/firmware
-
-# Copy source code
-WORKDIR /tmp/firmware
-COPY . /tmp/firmware
-
-# Build
-RUN bash ./bin/build-native.sh "$PIO_ENV" && \
-    cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
-
-# Fetch web assets
-RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/firmware/bin/web.version)/build.tar" -o /tmp/web.tar \
-    && mkdir -p /tmp/web \
-    && tar -xf /tmp/web.tar -C /tmp/web/ \
-    && gzip -dr /tmp/web \
-    && rm /tmp/web.tar
-
-##### PRODUCTION BUILD #############
-
-FROM debian:bookworm-slim
-LABEL org.opencontainers.image.title="Meshtastic" \
-      org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
-      org.opencontainers.image.url="https://meshtastic.org" \
-      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
-      org.opencontainers.image.authors="Meshtastic" \
-      org.opencontainers.image.licenses="GPL-3.0-or-later" \
-      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
-ENV DEBIAN_FRONTEND=noninteractive
-ENV TZ=Etc/UTC
-
-# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
-USER root
-
-RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7 libssl3 \
-        libx11-6 libinput10 libxkbcommon-x11-0 \
-    && apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && mkdir -p /var/lib/meshtasticd \
-    && mkdir -p /etc/meshtasticd/config.d \
-    && mkdir -p /etc/meshtasticd/ssl
-
-# Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/
-# Copy config templates
-COPY ./bin/config.d /etc/meshtasticd/available.d
-
-WORKDIR /var/lib/meshtasticd
-VOLUME /var/lib/meshtasticd
-
-# Expose Meshtastic TCP API port from the host
-EXPOSE 4403
-# Expose Meshtastic Web UI port from the host
-EXPOSE 9443
-
-CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
-
-HEALTHCHECK NONE
+CMD ["/Meshtastic-device/release/latest/bins/universal/meshtasticd_linux_amd64"]

README.md

@@ -1,39 +1,22 @@
-<div align="center" markdown="1">
+# Meshtastic-device
+[![Open in Visual Studio Code](https://open.vscode.dev/badges/open-in-vscode.svg)](https://open.vscode.dev/meshtastic/Meshtastic-device)
+[![Continuous Integration](https://github.com/meshtastic/Meshtastic-device/actions/workflows/main.yml/badge.svg)](https://github.com/meshtastic/Meshtastic-device/actions/workflows/main.yml)
+![GitHub all releases](https://img.shields.io/github/downloads/meshtastic/meshtastic-device/total)
 
-<img src=".github/meshtastic_logo.png" alt="Meshtastic Logo" width="80"/>
-<h1>Meshtastic Firmware</h1>
+This branch is End-of-Life.
 
-![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/firmware/total)
-[![CI](https://img.shields.io/github/actions/workflow/status/meshtastic/firmware/main_matrix.yml?branch=master&label=actions&logo=github&color=yellow)](https://github.com/meshtastic/firmware/actions/workflows/ci.yml)
-[![CLA assistant](https://cla-assistant.io/readme/badge/meshtastic/firmware)](https://cla-assistant.io/meshtastic/firmware)
-[![Fiscal Contributors](https://opencollective.com/meshtastic/tiers/badge.svg?label=Fiscal%20Contributors&color=deeppink)](https://opencollective.com/meshtastic/)
-[![Vercel](https://img.shields.io/static/v1?label=Powered%20by&message=Vercel&style=flat&logo=vercel&color=000000)](https://vercel.com?utm_source=meshtastic&utm_campaign=oss)
+Requires platformio = 6.0.0
 
-<a href="https://trendshift.io/repositories/5524" target="_blank"><img src="https://trendshift.io/api/badge/repositories/5524" alt="meshtastic%2Ffirmware | Trendshift" style="width: 250px; height: 55px;" width="250" height="55"/></a>
+Recommended to add "core_dir = .platformio" to your cloned platformio.ini and use python-virtualenv for compiling this branch. This will keep your system platformio and platform_packages separate.
 
-</div>
+# Old readme below #
 
-</div>
+## This repository contains the device firmware used in the [Meshtastic](https://meshtastic.org) project.
 
-<div align="center">
-	<a href="https://meshtastic.org">Website</a>
-	-
-	<a href="https://meshtastic.org/docs/">Documentation</a>
-</div>
+Update Instructions (docs have versioned up, may no longer apply)
 
-## Overview
+[For ESP32 devices click here](https://meshtastic.org/docs/getting-started/flashing-esp32)
 
-This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
+[For nRF52 devices click here](https://meshtastic.org/docs/getting-started/flashing-nrf52)
 
-Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
-
-### Get Started
-
-- 🔧 **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)** – Learn how to compile the firmware from source.
-- ⚡ **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)** – Install or update the firmware on your device.
-
-Join our community and help improve Meshtastic! 🚀
-
-## Stats
-
-![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+For developer information and specific building instructions, please see the [developer doccumentation](https://meshtastic.org/docs/developers)

SECURITY.md

@@ -1,12 +0,0 @@
-# Security Policy
-
-## Supported Versions
-
-| Firmware Version | Supported          |
-| ---------------- | ------------------ |
-| 2.6.x            | :white_check_mark: |
-| <= 2.5.x         | :x:                |
-
-## Reporting a Vulnerability
-
-We support the private reporting of potential security vulnerabilities. Please go to the Security tab to file a report with a description of the potential vulnerability and reproduction scripts (preferred) or steps, and our developers will review.

alpine.Dockerfile

@@ -1,62 +0,0 @@
-# trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
-# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
-
-FROM python:3.13-alpine3.21 AS builder
-ARG PIO_ENV=native
-ENV PIP_ROOT_USER_ACTION=ignore
-
-RUN apk --no-cache add \
-        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
-        libx11-dev libinput-dev libxkbcommon-dev \
-    && rm -rf /var/cache/apk/* \
-    && pip install --no-cache-dir -U platformio \
-    && mkdir /tmp/firmware
-
-WORKDIR /tmp/firmware
-COPY . /tmp/firmware
-
-# Create small package (no debugging symbols)
-# Add `argp` for musl
-ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
-
-RUN bash ./bin/build-native.sh "$PIO_ENV" && \
-    cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
-
-# ##### PRODUCTION BUILD #############
-
-FROM alpine:3.21
-LABEL org.opencontainers.image.title="Meshtastic" \
-      org.opencontainers.image.description="Alpine Meshtastic daemon" \
-      org.opencontainers.image.url="https://meshtastic.org" \
-      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
-      org.opencontainers.image.authors="Meshtastic" \
-      org.opencontainers.image.licenses="GPL-3.0-or-later" \
-      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
-
-# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
-USER root
-
-RUN apk --no-cache add \
-        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
-        libx11 libinput libxkbcommon \
-    && rm -rf /var/cache/apk/* \
-    && mkdir -p /var/lib/meshtasticd \
-    && mkdir -p /etc/meshtasticd/config.d \
-    && mkdir -p /etc/meshtasticd/ssl
-
-# Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-# Copy config templates
-COPY ./bin/config.d /etc/meshtasticd/available.d
-
-WORKDIR /var/lib/meshtasticd
-VOLUME /var/lib/meshtasticd
-
-EXPOSE 4403
-
-CMD [ "sh",  "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
-
-HEALTHCHECK NONE

arch/esp32/esp32.ini

@@ -1,78 +0,0 @@
-; Common settings for ESP targes, mixin with extends = esp32_base
-[esp32_base]
-extends = arduino_base
-custom_esp32_kind = esp32
-platform =
-  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
-  platformio/espressif32@6.10.0
-
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
-
-upload_speed = 921600
-debug_init_break = tbreak setup
-monitor_filters = esp32_exception_decoder
-
-board_build.filesystem = littlefs
-
-# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
-# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
-# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
-build_unflags = -fno-lto
-build_flags =
-  ${arduino_base.build_flags}
-  -flto
-  -Wall
-  -Wextra
-  -Isrc/platform/esp32
-  -std=c++11
-  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
-  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-  -DAXP_DEBUG_PORT=Serial
-  -DCONFIG_BT_NIMBLE_ENABLED
-  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DSERIAL_BUFFER_SIZE=4096
-  -DLIBPAX_ARDUINO
-  -DLIBPAX_WIFI
-  -DLIBPAX_BLE
-  -DHAS_UDP_MULTICAST=1
-  ;-DDEBUG_HEAP
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
-  ${radiolib_base.lib_deps}
-  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/896f1771ceb5979987a0b41028bf1b4e7aad419b.zip
-  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@^1.4.3
-  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
-  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@^0.2.7
-  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
-
-lib_ignore = 
-  segger_rtt
-  ESP32 BLE Arduino
-
-; leave this commented out to avoid breaking Windows
-;upload_port = /dev/ttyUSB0
-;monitor_port = /dev/ttyUSB0
-
-; Please don't delete these lines. JM uses them.
-;upload_port = /dev/cu.SLAB_USBtoUART
-;monitor_port = /dev/cu.SLAB_USBtoUART
-
-; customize the partition table
-; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv

arch/esp32/esp32c3.ini

@@ -1,6 +0,0 @@
-[esp32c3_base]
-extends = esp32_base
-custom_esp32_kind = esp32c3
-
-monitor_speed = 115200
-monitor_filters = esp32_c3_exception_decoder

arch/esp32/esp32c6.ini

@@ -1,47 +0,0 @@
-[esp32c6_base]
-extends = esp32_base
-platform =
-  # Do not renovate until we have switched to pioarduino tagged builds
-  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
-build_flags =
-  ${arduino_base.build_flags}
-  -Wall
-  -Wextra
-  -Isrc/platform/esp32
-  -std=c++11
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DSERIAL_BUFFER_SIZE=4096
-  -DLIBPAX_ARDUINO
-  -DLIBPAX_WIFI
-  -DLIBPAX_BLE
-  -DMESHTASTIC_EXCLUDE_WEBSERVER
-  ;-DDEBUG_HEAP
-  ; TEMP
-  -DHAS_BLUETOOTH=0
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
-  ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@^0.2.7
-  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
-  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
-
-build_src_filter = 
- ${esp32_base.build_src_filter} -<mesh/http> 
-
-monitor_speed = 460800
-monitor_filters = esp32_c3_exception_decoder
-
-lib_ignore =
-  NonBlockingRTTTL
-  NimBLE-Arduino
-  libpax
-  

arch/esp32/esp32s2.ini

@@ -1,19 +0,0 @@
-[esp32s2_base]
-extends = esp32_base
-custom_esp32_kind = esp32s2
-
-build_src_filter = 
- ${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
-
-monitor_speed = 115200
-
-build_flags =
-  ${esp32_base.build_flags} 
-  -DHAS_BLUETOOTH=0
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-  
-lib_ignore = 
-  ${esp32_base.lib_ignore} 
-  NimBLE-Arduino
-  libpax

arch/esp32/esp32s3.ini

@@ -1,5 +0,0 @@
-[esp32s3_base]
-extends = esp32_base
-custom_esp32_kind = esp32s3
-
-monitor_speed = 115200

arch/nrf52/cpp_overrides/lfs_util.h

@@ -1,208 +0,0 @@
-/*
- * lfs utility functions
- *
- * Copyright (c) 2017, Arm Limited. All rights reserved.
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-// MESHTASTIC/@geeksville note: This file is copied from the Adafruit nrf52 arduino lib.  And we use a special -include in
-// nrf52.ini to load it before EVERY file we do this hack because the default definitions for LFS_ASSERT are quite poor and we
-// don't want to fork the adafruit lib (again) and send in a PR that they probably won't merge anyways. This file might break if
-// they ever update lfs.util on their side, in which case we'll need to update this file to match their new version. The version
-// this is a copy from is almost exactly
-// https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/c25d93268a3b9c23e9a1ccfcaf9b208beca624ca/libraries/Adafruit_LittleFS/src/littlefs/lfs_util.h
-
-#ifndef LFS_UTIL_H
-#define LFS_UTIL_H
-
-// Users can override lfs_util.h with their own configuration by defining
-// LFS_CONFIG as a header file to include (-DLFS_CONFIG=lfs_config.h).
-//
-// If LFS_CONFIG is used, none of the default utils will be emitted and must be
-// provided by the config file. To start I would suggest copying lfs_util.h and
-// modifying as needed.
-#ifdef LFS_CONFIG
-#define LFS_STRINGIZE(x) LFS_STRINGIZE2(x)
-#define LFS_STRINGIZE2(x) #x
-#include LFS_STRINGIZE(LFS_CONFIG)
-#else
-
-// System includes
-#include <stdbool.h>
-#include <stdint.h>
-#include <string.h>
-
-#ifndef LFS_NO_MALLOC
-#include <stdlib.h>
-#endif
-#ifndef LFS_NO_ASSERT
-#include <assert.h>
-#endif
-
-#if !defined(LFS_NO_DEBUG) || !defined(LFS_NO_WARN) || !defined(LFS_NO_ERROR)
-#include <stdio.h>
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// Macros, may be replaced by system specific wrappers. Arguments to these
-// macros must not have side-effects as the macros can be removed for a smaller
-// code footprint
-
-// Logging functions
-#ifndef LFS_NO_DEBUG
-
-void logLegacy(const char *level, const char *fmt, ...);
-#define LFS_DEBUG(fmt, ...) logLegacy("DEBUG", "lfs debug:%d: " fmt "\n", __LINE__, __VA_ARGS__)
-#else
-#define LFS_DEBUG(fmt, ...)
-#endif
-
-#ifndef LFS_NO_WARN
-#define LFS_WARN(fmt, ...) logLegacy("WARN", "lfs warn:%d: " fmt "\n", __LINE__, __VA_ARGS__)
-#else
-#define LFS_WARN(fmt, ...)
-#endif
-
-#ifndef LFS_NO_ERROR
-#define LFS_ERROR(fmt, ...) logLegacy("ERROR", "lfs error:%d: " fmt "\n", __LINE__, __VA_ARGS__)
-#else
-#define LFS_ERROR(fmt, ...)
-#endif
-
-// Runtime assertions
-#ifndef LFS_NO_ASSERT
-#define LFS_ASSERT(test) assert(test)
-#else
-extern void lfs_assert(const char *reason);
-#define LFS_ASSERT(test)                                                                                                         \
-    if (!(test))                                                                                                                 \
-    lfs_assert(#test)
-#endif
-
-// Builtin functions, these may be replaced by more efficient
-// toolchain-specific implementations. LFS_NO_INTRINSICS falls back to a more
-// expensive basic C implementation for debugging purposes
-
-// Min/max functions for unsigned 32-bit numbers
-static inline uint32_t lfs_max(uint32_t a, uint32_t b)
-{
-    return (a > b) ? a : b;
-}
-
-static inline uint32_t lfs_min(uint32_t a, uint32_t b)
-{
-    return (a < b) ? a : b;
-}
-
-// Find the next smallest power of 2 less than or equal to a
-static inline uint32_t lfs_npw2(uint32_t a)
-{
-#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
-    return 32 - __builtin_clz(a - 1);
-#else
-    uint32_t r = 0;
-    uint32_t s;
-    a -= 1;
-    s = (a > 0xffff) << 4;
-    a >>= s;
-    r |= s;
-    s = (a > 0xff) << 3;
-    a >>= s;
-    r |= s;
-    s = (a > 0xf) << 2;
-    a >>= s;
-    r |= s;
-    s = (a > 0x3) << 1;
-    a >>= s;
-    r |= s;
-    return (r | (a >> 1)) + 1;
-#endif
-}
-
-// Count the number of trailing binary zeros in a
-// lfs_ctz(0) may be undefined
-static inline uint32_t lfs_ctz(uint32_t a)
-{
-#if !defined(LFS_NO_INTRINSICS) && defined(__GNUC__)
-    return __builtin_ctz(a);
-#else
-    return lfs_npw2((a & -a) + 1) - 1;
-#endif
-}
-
-// Count the number of binary ones in a
-static inline uint32_t lfs_popc(uint32_t a)
-{
-#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
-    return __builtin_popcount(a);
-#else
-    a = a - ((a >> 1) & 0x55555555);
-    a = (a & 0x33333333) + ((a >> 2) & 0x33333333);
-    return (((a + (a >> 4)) & 0xf0f0f0f) * 0x1010101) >> 24;
-#endif
-}
-
-// Find the sequence comparison of a and b, this is the distance
-// between a and b ignoring overflow
-static inline int lfs_scmp(uint32_t a, uint32_t b)
-{
-    return (int)(unsigned)(a - b);
-}
-
-// Convert from 32-bit little-endian to native order
-static inline uint32_t lfs_fromle32(uint32_t a)
-{
-#if !defined(LFS_NO_INTRINSICS) && ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_LITTLE_ENDIAN) ||                                \
-                                    (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_LITTLE_ENDIAN) ||                          \
-                                    (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__))
-    return a;
-#elif !defined(LFS_NO_INTRINSICS) &&                                                                                             \
-    ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_BIG_ENDIAN) || (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_BIG_ENDIAN) || \
-     (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__))
-    return __builtin_bswap32(a);
-#else
-    return (((uint8_t *)&a)[0] << 0) | (((uint8_t *)&a)[1] << 8) | (((uint8_t *)&a)[2] << 16) | (((uint8_t *)&a)[3] << 24);
-#endif
-}
-
-// Convert to 32-bit little-endian from native order
-static inline uint32_t lfs_tole32(uint32_t a)
-{
-    return lfs_fromle32(a);
-}
-
-// Calculate CRC-32 with polynomial = 0x04c11db7
-void lfs_crc(uint32_t *crc, const void *buffer, size_t size);
-
-// Allocate memory, only used if buffers are not provided to littlefs
-static inline void *lfs_malloc(size_t size)
-{
-#ifndef LFS_NO_MALLOC
-    extern void *pvPortMalloc(size_t xWantedSize);
-    return pvPortMalloc(size);
-#else
-    (void)size;
-    return NULL;
-#endif
-}
-
-// Deallocate memory, only used if buffers are not provided to littlefs
-static inline void lfs_free(void *p)
-{
-#ifndef LFS_NO_MALLOC
-    extern void vPortFree(void *pv);
-    vPortFree(p);
-#else
-    (void)p;
-#endif
-}
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif
-#endif

arch/nrf52/nrf52.ini

@@ -1,36 +0,0 @@
-[nrf52_base]
-; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform =
-  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
-  platformio/nordicnrf52@^10.8.0
-extends = arduino_base
-platform_packages =
-  ; our custom Git version until they merge our PR
-  # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
-  ; Don't renovate toolchain-gccarmnoneeabi
-  platformio/toolchain-gccarmnoneeabi@~1.90301.0
-
-build_type = debug
-build_flags =
-  -include arch/nrf52/cpp_overrides/lfs_util.h
-  ${arduino_base.build_flags}
-  -DSERIAL_BUFFER_SIZE=1024
-  -Wno-unused-variable
-  -Isrc/platform/nrf52
-  -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
-  -DMESHTASTIC_EXCLUDE_AUDIO=1
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
-
-lib_deps=
-  ${arduino_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
-
-lib_ignore =
-  BluetoothOTA
-  lvgl

arch/nrf52/nrf52832.ini

@@ -1,7 +0,0 @@
-[nrf52832_base]
-extends = nrf52_base
-
-build_flags = ${nrf52_base.build_flags} 
-
-lib_deps =
-  ${nrf52_base.lib_deps}

arch/nrf52/nrf52840.ini

@@ -1,80 +0,0 @@
-[nrf52840_base]
-extends = nrf52_base
-
-build_flags = ${nrf52_base.build_flags} 
-
-lib_deps =
-  ${nrf52_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
-  # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
-
-; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
-
-; We want the initial breakpoint at setup() instead of main().  Also we want to enable semihosting at that point so instead of
-debug_init_break = tbreak setup
-; we just turn off the platformio tbreak and do it in .gdbinit (where we have more flexibility for scripting)
-; also we use a permanent breakpoint so it gets reused each time we restart the debugging session?
-; debug_init_break = tbreak main
-
-; Note: add "monitor arm semihosting_redirect tcp 4444 all" if you want the stdout from the device to go to that port number instead
-; (for use by meshtastic command line)
-;  monitor arm semihosting disable
-;  monitor debug_level 3
-;
-; IMPORTANT: fileio must be disabled before using port 5555 - openocd ver 0.12 has a bug where if enabled it never properly parses the special :tt name
-; for stdio access.
-;   monitor arm semihosting_redirect tcp 5555 stdio
-
-; Also note: it is _impossible_ to do non blocking reads on the semihost console port (an oversight when ARM specified the semihost API).
-; So we'll neve be able to general purpose bi-directional communication with the device over semihosting.
-debug_extra_cmds =
-  echo Running .gdbinit script
-  ;monitor arm semihosting enable
-  ;monitor arm semihosting_fileio enable
-  ;monitor arm semihosting_redirect disable
-  commands 1
-  ; echo Breakpoint at setup() has semihosting console, connect to it with "telnet localhost 5555"
-  ; set wantSemihost = 1
-  set useSoftDevice = 0
-  end
-
-  ; Only reprogram the board if the code has changed
-debug_load_mode = modified
-;debug_load_mode = manual
-; We default to the stlink adapter because it is very cheap and works well, though others (such as jlink) are also supported.
-;debug_tool = jlink
-debug_tool = stlink
-debug_speed = 4000
-;debug_tool = custom
-; debug_server =
-;  openocd
-;  -f
-;  /usr/local/share/openocd/scripts/interface/stlink.cfg
-;  -f
-;  /usr/local/share/openocd/scripts/target/nrf52.cfg
-; $PLATFORMIO_CORE_DIR/packages/tool-openocd/openocd/scripts/interface/cmsis-dap.cfg
-
-; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
-; programming time is about the same as the bootloader version.
-; For information on this see the meshtastic developers documentation for "Development on the NRF52"
-; We manually pass in the elf file so that pyocd can reverse engineer FreeRTOS data (running threads, etc...)
-;debug_server =
-;  pyocd
-;  gdbserver
-;  -j
-;  ${platformio.workspace_dir}/..
-;  -t
-;  nrf52840
-;  --semihosting
-;  --elf
-;  ${platformio.build_dir}/${this.__env__}/firmware.elf
-
-; If you want to debug the semihosting support you can turn on extra logging in pyocd with
-;   -L
-;   pyocd.debug.semihost.trace=debug
-
-; The following is not needed because it automatically tries do this
-;debug_server_ready_pattern = -.*GDB server started on port \d+.*
-;debug_port = localhost:3333

arch/portduino/portduino.ini

@@ -1,51 +0,0 @@
-; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
-[portduino_base]
-platform =
-  # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/622341c6de8a239704318b10c3dbb00c21a3eab3.zip
-framework = arduino
-
-build_src_filter = 
-  ${env.build_src_filter} 
-  -<platform/esp32/> 
-  -<nimble/> 
-  -<platform/nrf52/> 
-  -<platform/stm32wl/> 
-  -<platform/rp2xx0>
-  -<mesh/wifi/>
-  -<mesh/http/>
-  +<mesh/raspihttp/>
-  -<mesh/eth/>
-  -<modules/esp32>
-  +<../variants/portduino>
-
-lib_deps =
-  ${env.lib_deps}
-  ${networking_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  ${environmental_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@^1.2.0
-  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
-  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
-
-build_flags =
-  ${arduino_base.build_flags}
-  -fPIC
-  -Isrc/platform/portduino
-  -DRADIOLIB_EEPROM_UNSUPPORTED
-  -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST
-  -lpthread
-  -lstdc++fs
-  -lbluetooth
-  -lgpiod
-  -lyaml-cpp
-  -li2c
-  -luv
-  -std=gnu17
-  -std=c++17
-
-lib_ignore = Adafruit NeoPixel

arch/rp2xx0/rp2040.ini

@@ -1,34 +0,0 @@
-; Common settings for rp2040 Processor based targets
-[rp2040_base]
-platform =
-  # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
-extends = arduino_base
-platform_packages =
-  # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
-
-board_build.core = earlephilhower
-board_build.filesystem_size = 0.5m
-build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
-  -Isrc/platform/rp2xx0
-  -Isrc/platform/rp2xx0/hardware_rosc/include
-  -Isrc/platform/rp2xx0/pico_sleep/include
-  -D__PLAT_RP2040__
-#  -D _POSIX_THREADS
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
-
-lib_ignore =
-  BluetoothOTA
-  lvgl
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
-  ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0

arch/rp2xx0/rp2350.ini

@@ -1,31 +0,0 @@
-; Common settings for rp2350 Processor based targets
-[rp2350_base]
-platform =
-  # TODO renovate
-  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
-  ; For arduino-pico >= 4.4.3
-extends = arduino_base
-platform_packages =
-  # TODO renovate
-  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
-
-board_build.core = earlephilhower
-board_build.filesystem_size = 0.5m
-build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
-  -Isrc/platform/rp2xx0
-  -D__PLAT_RP2350__
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>
-
-lib_ignore =
-  BluetoothOTA
-  lvgl
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${environmental_extra.lib_deps}
-  ${radiolib_base.lib_deps}
-  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
-  rweather/Crypto@0.4.0

arch/stm32/stm32.ini

@@ -1,47 +0,0 @@
-[stm32_base]
-extends = arduino_base
-platform =
-  # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.1.0
-platform_packages =
-  # TODO renovate
-  platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
-extra_scripts =
-  ${env.extra_scripts}
-  post:extra_scripts/extra_stm32.py
-
-build_type = release
-
-build_flags =
-  ${arduino_base.build_flags}
-  -flto
-  -Isrc/platform/stm32wl -g
-  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
-  -DMESHTASTIC_EXCLUDE_INPUTBROKER
-  -DMESHTASTIC_EXCLUDE_I2C
-  -DMESHTASTIC_EXCLUDE_POWERMON
-  -DMESHTASTIC_EXCLUDE_SCREEN
-  -DMESHTASTIC_EXCLUDE_MQTT
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-  -DMESHTASTIC_EXCLUDE_GPS
-  ;-DDEBUG_MUTE
-  -fmerge-all-constants
-  -ffunction-sections
-  -fdata-sections
-
-build_src_filter =
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
-
-board_upload.offset_address = 0x08000000
-upload_protocol = stlink
-debug_tool = stlink
-
-lib_deps =
-  ${env.lib_deps}
-  ${radiolib_base.lib_deps}
-  # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
-
-lib_ignore =
-  mathertel/OneButton@2.6.1
-  Wire

bin/.gitignore

@@ -1 +0,0 @@
-config.yaml