Merge branch 'develop' into status-message

src/main.cpp

@@ -77,10 +77,29 @@ NRF52Bluetooth *nrf52Bluetooth = nullptr;
 #include "mqtt/MQTT.h"
 #endif
 
+#include "LLCC68Interface.h"
+#include "LR1110Interface.h"
+#include "LR1120Interface.h"
+#include "LR1121Interface.h"
+#include "RF95Interface.h"
+#include "SX1262Interface.h"
+#include "SX1268Interface.h"
+#include "SX1280Interface.h"
+#include "detect/LoRaRadioType.h"
+
+#ifdef ARCH_STM32WL
+#include "STM32WLE5JCInterface.h"
+#endif
+
+#if defined(ARCH_PORTDUINO)
+#include "platform/portduino/SimRadio.h"
+#endif
+
 #ifdef ARCH_PORTDUINO
 #include "linux/LinuxHardwareI2C.h"
 #include "mesh/raspihttp/PiWebServer.h"
 #include "platform/portduino/PortduinoGlue.h"
+#include "platform/portduino/USBHal.h"
 #include <cstdlib>
 #include <fstream>
 #include <iostream>
@@ -235,6 +254,9 @@ ScanI2C::DeviceAddress aqi_found = ScanI2C::ADDRESS_NONE;
 Adafruit_DRV2605 drv;
 #endif
 
+// Global LoRa radio type
+LoRaRadioType radioType = NO_RADIO;
+
 bool isVibrating = false;
 
 bool eink_found = true;
@@ -271,7 +293,6 @@ const char *getDeviceName()
     return name;
 }
 
-// TODO remove from main.cpp
 static int32_t ledBlinker()
 {
     // Still set up the blinking (heartbeat) interval but skip code path below, so LED will blink if
@@ -367,7 +388,6 @@ void setup()
     // boot sequence will follow when battery level raises to safe mode
     waitUntilPowerLevelSafe();
 
-    // TODO remove all device-specific setup code to variant.cpp
 #if defined(R1_NEO)
     pinMode(DCDC_EN_HOLD, OUTPUT);
     digitalWrite(DCDC_EN_HOLD, HIGH);
@@ -469,6 +489,11 @@ void setup()
 #endif
 
     concurrency::hasBeenSetup = true;
+#if ARCH_PORTDUINO
+    SPISettings spiSettings(portduino_config.spiSpeed, MSBFIRST, SPI_MODE0);
+#else
+    SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
+#endif
 
     meshtastic_Config_DisplayConfig_OledType screen_model =
         meshtastic_Config_DisplayConfig_OledType::meshtastic_Config_DisplayConfig_OledType_OLED_AUTO;
@@ -607,7 +632,6 @@ void setup()
 
     OSThread::setup();
 
-    // TODO make this ifdef based on defined pins and move from main.cpp
 #if defined(ELECROW_ThinkNode_M1) || defined(ELECROW_ThinkNode_M2)
     // The ThinkNodes have their own blink logic
     // ledPeriodic = new Periodic("Blink", elecrowLedBlinker);
@@ -985,7 +1009,6 @@ void setup()
     }
 #endif // HAS_SCREEN
 
-    // TODO Remove magic string
     // setup TZ prior to time actions.
 #if !MESHTASTIC_EXCLUDE_TZ
     LOG_DEBUG("Use compiled/slipstreamed %s", slipstreamTZString); // important, removing this clobbers our magic string
@@ -1281,7 +1304,252 @@ void setup()
 #endif
 #endif
 
-    initLoRa();
+#ifdef ARCH_PORTDUINO
+    // as one can't use a function pointer to the class constructor:
+    auto loraModuleInterface = [](LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
+                                  RADIOLIB_PIN_TYPE busy) {
+        switch (portduino_config.lora_module) {
+        case use_rf95:
+            return (RadioInterface *)new RF95Interface(hal, cs, irq, rst, busy);
+        case use_sx1262:
+            return (RadioInterface *)new SX1262Interface(hal, cs, irq, rst, busy);
+        case use_sx1268:
+            return (RadioInterface *)new SX1268Interface(hal, cs, irq, rst, busy);
+        case use_sx1280:
+            return (RadioInterface *)new SX1280Interface(hal, cs, irq, rst, busy);
+        case use_lr1110:
+            return (RadioInterface *)new LR1110Interface(hal, cs, irq, rst, busy);
+        case use_lr1120:
+            return (RadioInterface *)new LR1120Interface(hal, cs, irq, rst, busy);
+        case use_lr1121:
+            return (RadioInterface *)new LR1121Interface(hal, cs, irq, rst, busy);
+        case use_llcc68:
+            return (RadioInterface *)new LLCC68Interface(hal, cs, irq, rst, busy);
+        case use_simradio:
+            return (RadioInterface *)new SimRadio;
+        default:
+            assert(0); // shouldn't happen
+            return (RadioInterface *)nullptr;
+        }
+    };
+
+    LOG_DEBUG("Activate %s radio on SPI port %s", portduino_config.loraModules[portduino_config.lora_module].c_str(),
+              portduino_config.lora_spi_dev.c_str());
+    if (portduino_config.lora_spi_dev == "ch341") {
+        RadioLibHAL = ch341Hal;
+    } else {
+        RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+    }
+    rIf =
+        loraModuleInterface((LockingArduinoHal *)RadioLibHAL, portduino_config.lora_cs_pin.pin, portduino_config.lora_irq_pin.pin,
+                            portduino_config.lora_reset_pin.pin, portduino_config.lora_busy_pin.pin);
+
+    if (!rIf->init()) {
+        LOG_WARN("No %s radio", portduino_config.loraModules[portduino_config.lora_module].c_str());
+        delete rIf;
+        rIf = NULL;
+        exit(EXIT_FAILURE);
+    } else {
+        LOG_INFO("%s init success", portduino_config.loraModules[portduino_config.lora_module].c_str());
+    }
+
+#elif defined(HW_SPI1_DEVICE)
+    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI1, spiSettings);
+#else // HW_SPI1_DEVICE
+    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+#endif
+
+    // radio init MUST BE AFTER service.init, so we have our radio config settings (from nodedb init)
+#if defined(USE_STM32WLx)
+    if (!rIf) {
+        rIf = new STM32WLE5JCInterface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No STM32WL radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("STM32WL init success");
+            radioType = STM32WLx_RADIO;
+        }
+    }
+#endif
+
+#if defined(RF95_IRQ) && RADIOLIB_EXCLUDE_SX127X != 1
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new RF95Interface(RadioLibHAL, LORA_CS, RF95_IRQ, RF95_RESET, RF95_DIO1);
+        if (!rIf->init()) {
+            LOG_WARN("No RF95 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("RF95 init success");
+            radioType = RF95_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && !defined(TCXO_OPTIONAL) && RADIOLIB_EXCLUDE_SX126X != 1
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
+#endif
+        if (!sxIf->init()) {
+            LOG_WARN("No SX1262 radio");
+            delete sxIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1262 init success");
+            rIf = sxIf;
+            radioType = SX1262_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && defined(TCXO_OPTIONAL)
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        // try using the specified TCXO voltage
+        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
+        if (!sxIf->init()) {
+            LOG_WARN("No SX1262 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            delete sxIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1262 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            rIf = sxIf;
+            radioType = SX1262_RADIO;
+        }
+    }
+
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        // If specified TCXO voltage fails, attempt to use DIO3 as a reference instead
+        rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No SX1262 radio with XTAL, Vref 0.0V");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1262 init success, XTAL, Vref 0.0V");
+            radioType = SX1262_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1268)
+#if defined(SX126X_DIO3_TCXO_VOLTAGE) && defined(TCXO_OPTIONAL)
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        // try using the specified TCXO voltage
+        auto *sxIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
+        if (!sxIf->init()) {
+            LOG_WARN("No SX1268 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            delete sxIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1268 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            rIf = sxIf;
+            radioType = SX1268_RADIO;
+        }
+    }
+#endif
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No SX1268 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1268 init success");
+            radioType = SX1268_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LLCC68)
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new LLCC68Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No LLCC68 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LLCC68 init success");
+            radioType = LLCC68_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1110) && RADIOLIB_EXCLUDE_LR11X0 != 1
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new LR1110Interface(RadioLibHAL, LR1110_SPI_NSS_PIN, LR1110_IRQ_PIN, LR1110_NRESET_PIN, LR1110_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("No LR1110 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1110 init success");
+            radioType = LR1110_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1120) && RADIOLIB_EXCLUDE_LR11X0 != 1
+    if (!rIf) {
+        rIf = new LR1120Interface(RadioLibHAL, LR1120_SPI_NSS_PIN, LR1120_IRQ_PIN, LR1120_NRESET_PIN, LR1120_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("No LR1120 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1120 init success");
+            radioType = LR1120_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1121) && RADIOLIB_EXCLUDE_LR11X0 != 1
+    if (!rIf) {
+        rIf = new LR1121Interface(RadioLibHAL, LR1121_SPI_NSS_PIN, LR1121_IRQ_PIN, LR1121_NRESET_PIN, LR1121_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("No LR1121 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1121 init success");
+            radioType = LR1121_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1280) && RADIOLIB_EXCLUDE_SX128X != 1
+    if (!rIf) {
+        rIf = new SX1280Interface(RadioLibHAL, SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No SX1280 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1280 init success");
+            radioType = SX1280_RADIO;
+        }
+    }
+#endif
+
+    // check if the radio chip matches the selected region
+    if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && rIf && (!rIf->wideLora())) {
+        LOG_WARN("LoRa chip does not support 2.4GHz. Revert to unset");
+        config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
+        nodeDB->saveToDisk(SEGMENT_CONFIG);
+
+        if (!rIf->reconfigure()) {
+            LOG_WARN("Reconfigure failed, rebooting");
+            if (screen) {
+                screen->showSimpleBanner("Rebooting...");
+            }
+            rebootAtMsec = millis() + 5000;
+        }
+    }
 
     lateInitVariant(); // Do board specific init (see extra_variants/README.md for documentation)
 
@@ -1370,7 +1638,6 @@ bool suppressRebootBanner; // If true, suppress "Rebooting..." overlay (used for
 // This will suppress the current delay and instead try to run ASAP.
 bool runASAP;
 
-// TODO find better home than main.cpp
 extern meshtastic_DeviceMetadata getDeviceMetadata()
 {
     meshtastic_DeviceMetadata deviceMetadata;

src/mesh/NodeDB.cpp

@@ -1411,6 +1411,15 @@ void NodeDB::loadFromDisk()
     if (portduino_config.has_configDisplayMode) {
         config.display.displaymode = (_meshtastic_Config_DisplayConfig_DisplayMode)portduino_config.configDisplayMode;
     }
+    if (portduino_config.has_statusMessage) {
+        moduleConfig.has_statusmessage = true;
+        strncpy(moduleConfig.statusmessage.node_status, portduino_config.statusMessage.c_str(),
+                sizeof(moduleConfig.statusmessage.node_status));
+        moduleConfig.statusmessage.node_status[sizeof(moduleConfig.statusmessage.node_status) - 1] = '\0';
+    }
+    if (portduino_config.enable_UDP) {
+        config.network.enabled_protocols = true;
+    }
 
 #endif
 }
@@ -1551,6 +1560,7 @@ bool NodeDB::saveToDiskNoRetry(int saveWhat)
         moduleConfig.has_ambient_lighting = true;
         moduleConfig.has_audio = true;
         moduleConfig.has_paxcounter = true;
+        moduleConfig.has_statusmessage = true;
 
         success &=
             saveProto(moduleConfigFileName, meshtastic_LocalModuleConfig_size, &meshtastic_LocalModuleConfig_msg, &moduleConfig);

src/mesh/RadioInterface.cpp

@@ -1,36 +1,17 @@
 #include "RadioInterface.h"
 #include "Channels.h"
 #include "DisplayFormatters.h"
-#include "LLCC68Interface.h"
-#include "LR1110Interface.h"
-#include "LR1120Interface.h"
-#include "LR1121Interface.h"
 #include "MeshRadio.h"
 #include "MeshService.h"
 #include "NodeDB.h"
-#include "RF95Interface.h"
 #include "Router.h"
-#include "SX1262Interface.h"
-#include "SX1268Interface.h"
-#include "SX1280Interface.h"
 #include "configuration.h"
-#include "detect/LoRaRadioType.h"
 #include "main.h"
 #include "sleep.h"
 #include <assert.h>
 #include <pb_decode.h>
 #include <pb_encode.h>
 
-#ifdef ARCH_PORTDUINO
-#include "platform/portduino/PortduinoGlue.h"
-#include "platform/portduino/SimRadio.h"
-#include "platform/portduino/USBHal.h"
-#endif
-
-#ifdef ARCH_STM32WL>
-#include "STM32WLE5JCInterface.h"
-#endif
-
 // Calculate 2^n without calling pow()
 uint32_t pow_of_2(uint32_t n)
 {
@@ -224,281 +205,6 @@ bool RadioInterface::uses_default_frequency_slot = true;
 
 static uint8_t bytes[MAX_LORA_PAYLOAD_LEN + 1];
 
-// Global LoRa radio type
-LoRaRadioType radioType = NO_RADIO;
-
-extern RadioInterface *rIf;
-extern RadioLibHal *RadioLibHAL;
-#if defined(HW_SPI1_DEVICE) && defined(ARCH_ESP32)
-extern SPIClass SPI1;
-#endif
-
-bool initLoRa()
-{
-    if (rIf != nullptr) {
-        delete rIf;
-        rIf = nullptr;
-    }
-
-#if ARCH_PORTDUINO
-    SPISettings spiSettings(portduino_config.spiSpeed, MSBFIRST, SPI_MODE0);
-#else
-    SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
-#endif
-
-#ifdef ARCH_PORTDUINO
-    // as one can't use a function pointer to the class constructor:
-    auto loraModuleInterface = [](LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
-                                  RADIOLIB_PIN_TYPE busy) {
-        switch (portduino_config.lora_module) {
-        case use_rf95:
-            return (RadioInterface *)new RF95Interface(hal, cs, irq, rst, busy);
-        case use_sx1262:
-            return (RadioInterface *)new SX1262Interface(hal, cs, irq, rst, busy);
-        case use_sx1268:
-            return (RadioInterface *)new SX1268Interface(hal, cs, irq, rst, busy);
-        case use_sx1280:
-            return (RadioInterface *)new SX1280Interface(hal, cs, irq, rst, busy);
-        case use_lr1110:
-            return (RadioInterface *)new LR1110Interface(hal, cs, irq, rst, busy);
-        case use_lr1120:
-            return (RadioInterface *)new LR1120Interface(hal, cs, irq, rst, busy);
-        case use_lr1121:
-            return (RadioInterface *)new LR1121Interface(hal, cs, irq, rst, busy);
-        case use_llcc68:
-            return (RadioInterface *)new LLCC68Interface(hal, cs, irq, rst, busy);
-        case use_simradio:
-            return (RadioInterface *)new SimRadio;
-        default:
-            assert(0); // shouldn't happen
-            return (RadioInterface *)nullptr;
-        }
-    };
-
-    LOG_DEBUG("Activate %s radio on SPI port %s", portduino_config.loraModules[portduino_config.lora_module].c_str(),
-              portduino_config.lora_spi_dev.c_str());
-    if (portduino_config.lora_spi_dev == "ch341") {
-        RadioLibHAL = ch341Hal;
-    } else {
-        if (RadioLibHAL != nullptr) {
-            delete RadioLibHAL;
-            RadioLibHAL = nullptr;
-        }
-        RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
-    }
-    rIf =
-        loraModuleInterface((LockingArduinoHal *)RadioLibHAL, portduino_config.lora_cs_pin.pin, portduino_config.lora_irq_pin.pin,
-                            portduino_config.lora_reset_pin.pin, portduino_config.lora_busy_pin.pin);
-
-    if (!rIf->init()) {
-        LOG_WARN("No %s radio", portduino_config.loraModules[portduino_config.lora_module].c_str());
-        delete rIf;
-        rIf = NULL;
-        exit(EXIT_FAILURE);
-    } else {
-        LOG_INFO("%s init success", portduino_config.loraModules[portduino_config.lora_module].c_str());
-    }
-
-#elif defined(HW_SPI1_DEVICE)
-    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI1, spiSettings);
-#else // HW_SPI1_DEVICE
-    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
-#endif
-
-// radio init MUST BE AFTER service.init, so we have our radio config settings (from nodedb init)
-#if defined(USE_STM32WLx)
-    if (!rIf) {
-        rIf = new STM32WLE5JCInterface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No STM32WL radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("STM32WL init success");
-            radioType = STM32WLx_RADIO;
-        }
-    }
-#endif
-
-#if defined(RF95_IRQ) && RADIOLIB_EXCLUDE_SX127X != 1
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new RF95Interface(RadioLibHAL, LORA_CS, RF95_IRQ, RF95_RESET, RF95_DIO1);
-        if (!rIf->init()) {
-            LOG_WARN("No RF95 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("RF95 init success");
-            radioType = RF95_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && !defined(TCXO_OPTIONAL) && RADIOLIB_EXCLUDE_SX126X != 1
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
-        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
-#endif
-        if (!sxIf->init()) {
-            LOG_WARN("No SX1262 radio");
-            delete sxIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1262 init success");
-            rIf = sxIf;
-            radioType = SX1262_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && defined(TCXO_OPTIONAL)
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        // try using the specified TCXO voltage
-        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
-        if (!sxIf->init()) {
-            LOG_WARN("No SX1262 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            delete sxIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1262 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            rIf = sxIf;
-            radioType = SX1262_RADIO;
-        }
-    }
-
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        // If specified TCXO voltage fails, attempt to use DIO3 as a reference instead
-        rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No SX1262 radio with XTAL, Vref 0.0V");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1262 init success, XTAL, Vref 0.0V");
-            radioType = SX1262_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1268)
-#if defined(SX126X_DIO3_TCXO_VOLTAGE) && defined(TCXO_OPTIONAL)
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        // try using the specified TCXO voltage
-        auto *sxIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
-        if (!sxIf->init()) {
-            LOG_WARN("No SX1268 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            delete sxIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1268 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            rIf = sxIf;
-            radioType = SX1268_RADIO;
-        }
-    }
-#endif
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No SX1268 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1268 init success");
-            radioType = SX1268_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LLCC68)
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new LLCC68Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No LLCC68 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LLCC68 init success");
-            radioType = LLCC68_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LR1110) && RADIOLIB_EXCLUDE_LR11X0 != 1
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new LR1110Interface(RadioLibHAL, LR1110_SPI_NSS_PIN, LR1110_IRQ_PIN, LR1110_NRESET_PIN, LR1110_BUSY_PIN);
-        if (!rIf->init()) {
-            LOG_WARN("No LR1110 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LR1110 init success");
-            radioType = LR1110_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LR1120) && RADIOLIB_EXCLUDE_LR11X0 != 1
-    if (!rIf) {
-        rIf = new LR1120Interface(RadioLibHAL, LR1120_SPI_NSS_PIN, LR1120_IRQ_PIN, LR1120_NRESET_PIN, LR1120_BUSY_PIN);
-        if (!rIf->init()) {
-            LOG_WARN("No LR1120 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LR1120 init success");
-            radioType = LR1120_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LR1121) && RADIOLIB_EXCLUDE_LR11X0 != 1
-    if (!rIf) {
-        rIf = new LR1121Interface(RadioLibHAL, LR1121_SPI_NSS_PIN, LR1121_IRQ_PIN, LR1121_NRESET_PIN, LR1121_BUSY_PIN);
-        if (!rIf->init()) {
-            LOG_WARN("No LR1121 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LR1121 init success");
-            radioType = LR1121_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1280) && RADIOLIB_EXCLUDE_SX128X != 1
-    if (!rIf) {
-        rIf = new SX1280Interface(RadioLibHAL, SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No SX1280 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1280 init success");
-            radioType = SX1280_RADIO;
-        }
-    }
-#endif
-
-    // check if the radio chip matches the selected region
-    if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && rIf && (!rIf->wideLora())) {
-        LOG_WARN("LoRa chip does not support 2.4GHz. Revert to unset");
-        config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
-        nodeDB->saveToDisk(SEGMENT_CONFIG);
-
-        if (rIf && !rIf->reconfigure()) {
-            LOG_WARN("Reconfigure failed, rebooting");
-            if (screen) {
-                screen->showSimpleBanner("Rebooting...");
-            }
-            rebootAtMsec = millis() + 5000;
-        }
-    }
-    return rIf != nullptr;
-}
-
 void initRegion()
 {
     const RegionInfo *r = regions;

src/mesh/RadioInterface.h

@@ -270,7 +270,5 @@ class RadioInterface
     }
 };
 
-bool initLoRa();
-
 /// Debug printing for packets
 void printPacket(const char *prefix, const meshtastic_MeshPacket *p);

src/mesh/Router.cpp

@@ -7,6 +7,7 @@
 #include "RTC.h"
 
 #include "configuration.h"
+#include "detect/LoRaRadioType.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "meshUtils.h"

src/modules/AdminModule.cpp

@@ -905,10 +905,11 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
 
 bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
 {
+    bool shouldReboot = true;
     // If we are in an open transaction or configuring MQTT or Serial (which have validation), defer disabling Bluetooth
     // Otherwise, disable Bluetooth to prevent the phone from interfering with the config
-    if (!hasOpenEditTransaction &&
-        !IS_ONE_OF(c.which_payload_variant, meshtastic_ModuleConfig_mqtt_tag, meshtastic_ModuleConfig_serial_tag)) {
+    if (!hasOpenEditTransaction && !IS_ONE_OF(c.which_payload_variant, meshtastic_ModuleConfig_mqtt_tag,
+                                              meshtastic_ModuleConfig_serial_tag, meshtastic_ModuleConfig_statusmessage_tag)) {
         disableBluetooth();
     }
 
@@ -1000,8 +1001,14 @@ bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
         moduleConfig.has_paxcounter = true;
         moduleConfig.paxcounter = c.payload_variant.paxcounter;
         break;
+    case meshtastic_ModuleConfig_statusmessage_tag:
+        LOG_INFO("Set module config: StatusMessage");
+        moduleConfig.has_statusmessage = true;
+        moduleConfig.statusmessage = c.payload_variant.statusmessage;
+        shouldReboot = false;
+        break;
     }
-    saveChanges(SEGMENT_MODULECONFIG);
+    saveChanges(SEGMENT_MODULECONFIG, shouldReboot);
     return true;
 }
 
@@ -1180,6 +1187,11 @@ void AdminModule::handleGetModuleConfig(const meshtastic_MeshPacket &req, const
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag;
             res.get_module_config_response.payload_variant.paxcounter = moduleConfig.paxcounter;
             break;
+        case meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG:
+            LOG_INFO("Get module config: StatusMessage");
+            res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_statusmessage_tag;
+            res.get_module_config_response.payload_variant.statusmessage = moduleConfig.statusmessage;
+            break;
         }
 
         // NOTE: The phone app needs to know the ls_secsvalue so it can properly expect sleep behavior.

src/modules/Modules.cpp

@@ -108,6 +108,9 @@
 #if !MESHTASTIC_EXCLUDE_DROPZONE
 #include "modules/DropzoneModule.h"
 #endif
+#if !MESHTASTIC_EXCLUDE_STATUS
+#include "modules/StatusMessageModule.h"
+#endif
 
 /**
  * Create module instances here.  If you are adding a new module, you must 'new' it here (or somewhere else)
@@ -165,6 +168,9 @@ void setupModules()
 #if !MESHTASTIC_EXCLUDE_DROPZONE
     dropzoneModule = new DropzoneModule();
 #endif
+#if !MESHTASTIC_EXCLUDE_STATUS
+    statusMessageModule = new StatusMessageModule();
+#endif
 #if !MESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE
     new GenericThreadModule();
 #endif

src/modules/StatusMessageModule.cpp

@@ -0,0 +1,41 @@
+#if !MESHTASTIC_EXCLUDE_STATUS
+
+#include "StatusMessageModule.h"
+#include "MeshService.h"
+#include "ProtobufModule.h"
+
+StatusMessageModule *statusMessageModule;
+
+int32_t StatusMessageModule::runOnce()
+{
+    if (moduleConfig.has_statusmessage && moduleConfig.statusmessage.node_status[0] != '\0') {
+        // create and send message with the status message set
+        meshtastic_StatusMessage ourStatus = meshtastic_StatusMessage_init_zero;
+        strncpy(ourStatus.status, moduleConfig.statusmessage.node_status, sizeof(ourStatus.status));
+        ourStatus.status[sizeof(ourStatus.status) - 1] = '\0'; // ensure null termination
+        meshtastic_MeshPacket *p = allocDataPacket();
+        p->decoded.payload.size = pb_encode_to_bytes(p->decoded.payload.bytes, sizeof(p->decoded.payload.bytes),
+                                                     meshtastic_StatusMessage_fields, &ourStatus);
+        p->to = NODENUM_BROADCAST;
+        p->decoded.want_response = false;
+        p->priority = meshtastic_MeshPacket_Priority_BACKGROUND;
+        p->channel = 0;
+        service->sendToMesh(p);
+    }
+
+    return 1000 * 12 * 60 * 60;
+}
+
+ProcessMessage StatusMessageModule::handleReceived(const meshtastic_MeshPacket &mp)
+{
+    if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
+        meshtastic_StatusMessage incomingMessage;
+        if (pb_decode_from_bytes(mp.decoded.payload.bytes, mp.decoded.payload.size, meshtastic_StatusMessage_fields,
+                                 &incomingMessage)) {
+            LOG_INFO("Received a NodeStatus message %s", incomingMessage.status);
+        }
+    }
+    return ProcessMessage::CONTINUE;
+}
+
+#endif

src/modules/StatusMessageModule.h

@@ -0,0 +1,35 @@
+#pragma once
+#if !MESHTASTIC_EXCLUDE_STATUS
+#include "SinglePortModule.h"
+#include "configuration.h"
+
+class StatusMessageModule : public SinglePortModule, private concurrency::OSThread
+{
+
+  public:
+    /** Constructor
+     * name is for debugging output
+     */
+    StatusMessageModule()
+        : SinglePortModule("statusMessage", meshtastic_PortNum_NODE_STATUS_APP), concurrency::OSThread("StatusMessage")
+    {
+        if (moduleConfig.has_statusmessage && moduleConfig.statusmessage.node_status[0] != '\0') {
+            this->setInterval(2 * 60 * 1000);
+        } else {
+            this->setInterval(1000 * 12 * 60 * 60);
+        }
+        // TODO: If we have a string, set the initial delay (15 minutes maybe)
+    }
+
+    virtual int32_t runOnce() override;
+
+  protected:
+    /** Called to handle a particular incoming message
+     */
+    virtual ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override;
+
+  private:
+};
+
+extern StatusMessageModule *statusMessageModule;
+#endif

src/platform/portduino/PortduinoGlue.cpp

@@ -861,6 +861,7 @@ bool loadConfig(const char *configPath)
         }
 
         if (yamlConfig["Config"]) {
+            portduino_config.has_config_overrides = true;
             if (yamlConfig["Config"]["DisplayMode"]) {
                 portduino_config.has_configDisplayMode = true;
                 if ((yamlConfig["Config"]["DisplayMode"]).as<std::string>("") == "TWOCOLOR") {
@@ -873,6 +874,13 @@ bool loadConfig(const char *configPath)
                     portduino_config.configDisplayMode = meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT;
                 }
             }
+            if (yamlConfig["Config"]["StatusMessage"]) {
+                portduino_config.has_statusMessage = true;
+                portduino_config.statusMessage = (yamlConfig["Config"]["StatusMessage"]).as<std::string>("");
+            }
+            if ((yamlConfig["Config"]["EnableUDP"]).as<bool>(false)) {
+                portduino_config.enable_UDP = true;
+            }
         }
 
         if (yamlConfig["General"]) {

src/platform/portduino/PortduinoGlue.h

@@ -170,8 +170,12 @@ extern struct portduino_config_struct {
     int hostMetrics_channel = 0;
 
     // config
+    bool has_config_overrides = false;
     int configDisplayMode = 0;
     bool has_configDisplayMode = false;
+    std::string statusMessage = "";
+    bool has_statusMessage = false;
+    bool enable_UDP = false;
 
     // General
     std::string mac_address = "";
@@ -498,21 +502,30 @@ extern struct portduino_config_struct {
         }
 
         // config
-        if (has_configDisplayMode) {
+        if (has_config_overrides) {
             out << YAML::Key << "Config" << YAML::Value << YAML::BeginMap;
-            switch (configDisplayMode) {
-            case meshtastic_Config_DisplayConfig_DisplayMode_TWOCOLOR:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "TWOCOLOR";
-                break;
-            case meshtastic_Config_DisplayConfig_DisplayMode_INVERTED:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "INVERTED";
-                break;
-            case meshtastic_Config_DisplayConfig_DisplayMode_COLOR:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "COLOR";
-                break;
-            case meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "DEFAULT";
-                break;
+            if (has_configDisplayMode) {
+
+                switch (configDisplayMode) {
+                case meshtastic_Config_DisplayConfig_DisplayMode_TWOCOLOR:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "TWOCOLOR";
+                    break;
+                case meshtastic_Config_DisplayConfig_DisplayMode_INVERTED:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "INVERTED";
+                    break;
+                case meshtastic_Config_DisplayConfig_DisplayMode_COLOR:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "COLOR";
+                    break;
+                case meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "DEFAULT";
+                    break;
+                }
+            }
+            if (has_statusMessage) {
+                out << YAML::Key << "StatusMessage" << YAML::Value << statusMessage;
+            }
+            if (enable_UDP) {
+                out << YAML::Key << "EnableUDP" << YAML::Value << true;
             }
 
             out << YAML::EndMap; // Config