Don't reboot node simply for a StatusMessage config update

monitor/filter_c3_exception_decoder.py

@@ -43,11 +43,13 @@ class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
         self.enabled = self.setup_paths()
 
         if self.config.get("env:" + self.environment, "build_type") != "debug":
-            print("""
+            print(
+                """
 Please build project in debug configuration to get more details about an exception.
 See https://docs.platformio.org/page/projectconf/build_configurations.html
 
-""")
+"""
+            )
 
         return self
 

src/configuration.h

@@ -155,10 +155,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 // Default system gain to 0 if not defined
-#ifndef NUM_PA_POINTS
-#define NUM_PA_POINTS 1
-#endif
-
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
 #endif

src/mesh/NodeDB.cpp

@@ -1410,6 +1410,15 @@ void NodeDB::loadFromDisk()
     if (portduino_config.has_configDisplayMode) {
         config.display.displaymode = (_meshtastic_Config_DisplayConfig_DisplayMode)portduino_config.configDisplayMode;
     }
+    if (portduino_config.has_statusMessage) {
+        moduleConfig.has_statusmessage = true;
+        strncpy(moduleConfig.statusmessage.node_status, portduino_config.statusMessage.c_str(),
+                sizeof(moduleConfig.statusmessage.node_status));
+        moduleConfig.statusmessage.node_status[sizeof(moduleConfig.statusmessage.node_status) - 1] = '\0';
+    }
+    if (portduino_config.enable_UDP) {
+        config.network.enabled_protocols = true;
+    }
 
 #endif
 }
@@ -1510,6 +1519,7 @@ bool NodeDB::saveToDiskNoRetry(int saveWhat)
         moduleConfig.has_ambient_lighting = true;
         moduleConfig.has_audio = true;
         moduleConfig.has_paxcounter = true;
+        moduleConfig.has_statusmessage = true;
 
         success &=
             saveProto(moduleConfigFileName, meshtastic_LocalModuleConfig_size, &meshtastic_LocalModuleConfig_msg, &moduleConfig);

src/mesh/RadioInterface.cpp

@@ -666,24 +666,18 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
         power = maxPower;
     }
 
-#ifdef ARCH_PORTDUINO
-    size_t num_pa_points = portduino_config.num_pa_points;
-    const uint16_t *tx_gain = portduino_config.tx_gain_lora;
+#ifndef NUM_PA_POINTS
+    if (TX_GAIN_LORA > 0 && !devicestate.owner.is_licensed) {
+        LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, TX_GAIN_LORA);
+        power -= TX_GAIN_LORA;
+    }
 #else
-    size_t num_pa_points = NUM_PA_POINTS;
-    const uint16_t tx_gain[NUM_PA_POINTS] = {TX_GAIN_LORA};
-#endif
-
-    if (num_pa_points == 1) {
-        if (tx_gain[0] > 0 && !devicestate.owner.is_licensed) {
-            LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, tx_gain[0]);
-            power -= tx_gain[0];
-        }
-    } else if (!devicestate.owner.is_licensed) {
+    if (!devicestate.owner.is_licensed) {
         // we have an array of PA gain values.  Find the highest power setting that works.
-        for (int radio_dbm = 0; radio_dbm < num_pa_points; radio_dbm++) {
+        const uint16_t tx_gain[NUM_PA_POINTS] = {TX_GAIN_LORA};
+        for (int radio_dbm = 0; radio_dbm < NUM_PA_POINTS; radio_dbm++) {
             if (((radio_dbm + tx_gain[radio_dbm]) > power) ||
-                ((radio_dbm == (num_pa_points - 1)) && ((radio_dbm + tx_gain[radio_dbm]) <= power))) {
+                ((radio_dbm == (NUM_PA_POINTS - 1)) && ((radio_dbm + tx_gain[radio_dbm]) <= power))) {
                 // we've exceeded the power limit, or hit the max we can do
                 LOG_INFO("Requested Tx power: %d dBm; Device LoRa Tx gain: %d dB", power, tx_gain[radio_dbm]);
                 power -= tx_gain[radio_dbm];
@@ -691,7 +685,7 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
             }
         }
     }
-
+#endif
     if (power > loraMaxPower) // Clamp power to maximum defined level
         power = loraMaxPower;
 

src/modules/AdminModule.cpp

@@ -905,10 +905,11 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
 
 bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
 {
+    bool shouldReboot = true;
     // If we are in an open transaction or configuring MQTT or Serial (which have validation), defer disabling Bluetooth
     // Otherwise, disable Bluetooth to prevent the phone from interfering with the config
-    if (!hasOpenEditTransaction &&
-        !IS_ONE_OF(c.which_payload_variant, meshtastic_ModuleConfig_mqtt_tag, meshtastic_ModuleConfig_serial_tag)) {
+    if (!hasOpenEditTransaction && !IS_ONE_OF(c.which_payload_variant, meshtastic_ModuleConfig_mqtt_tag,
+                                              meshtastic_ModuleConfig_serial_tag, meshtastic_ModuleConfig_statusmessage_tag)) {
         disableBluetooth();
     }
 
@@ -1000,8 +1001,14 @@ bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
         moduleConfig.has_paxcounter = true;
         moduleConfig.paxcounter = c.payload_variant.paxcounter;
         break;
+    case meshtastic_ModuleConfig_statusmessage_tag:
+        LOG_INFO("Set module config: StatusMessage");
+        moduleConfig.has_statusmessage = true;
+        moduleConfig.statusmessage = c.payload_variant.statusmessage;
+        shouldReboot = false;
+        break;
     }
-    saveChanges(SEGMENT_MODULECONFIG);
+    saveChanges(SEGMENT_MODULECONFIG, shouldReboot);
     return true;
 }
 
@@ -1180,6 +1187,11 @@ void AdminModule::handleGetModuleConfig(const meshtastic_MeshPacket &req, const
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag;
             res.get_module_config_response.payload_variant.paxcounter = moduleConfig.paxcounter;
             break;
+        case meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG:
+            LOG_INFO("Get module config: StatusMessage");
+            res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_statusmessage_tag;
+            res.get_module_config_response.payload_variant.statusmessage = moduleConfig.statusmessage;
+            break;
         }
 
         // NOTE: The phone app needs to know the ls_secsvalue so it can properly expect sleep behavior.

src/modules/Modules.cpp

@@ -108,6 +108,9 @@
 #if !MESHTASTIC_EXCLUDE_DROPZONE
 #include "modules/DropzoneModule.h"
 #endif
+#if !MESHTASTIC_EXCLUDE_STATUS
+#include "modules/StatusMessageModule.h"
+#endif
 
 /**
  * Create module instances here.  If you are adding a new module, you must 'new' it here (or somewhere else)
@@ -165,6 +168,9 @@ void setupModules()
 #if !MESHTASTIC_EXCLUDE_DROPZONE
     dropzoneModule = new DropzoneModule();
 #endif
+#if !MESHTASTIC_EXCLUDE_STATUS
+    statusMessageModule = new StatusMessageModule();
+#endif
 #if !MESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE
     new GenericThreadModule();
 #endif

src/modules/StatusMessageModule.cpp

@@ -0,0 +1,41 @@
+#if !MESHTASTIC_EXCLUDE_STATUS
+
+#include "StatusMessageModule.h"
+#include "MeshService.h"
+#include "ProtobufModule.h"
+
+StatusMessageModule *statusMessageModule;
+
+int32_t StatusMessageModule::runOnce()
+{
+    if (moduleConfig.has_statusmessage && moduleConfig.statusmessage.node_status[0] != '\0') {
+        // create and send message with the status message set
+        meshtastic_StatusMessage ourStatus = meshtastic_StatusMessage_init_zero;
+        strncpy(ourStatus.status, moduleConfig.statusmessage.node_status, sizeof(ourStatus.status));
+        ourStatus.status[sizeof(ourStatus.status) - 1] = '\0'; // ensure null termination
+        meshtastic_MeshPacket *p = allocDataPacket();
+        p->decoded.payload.size = pb_encode_to_bytes(p->decoded.payload.bytes, sizeof(p->decoded.payload.bytes),
+                                                     meshtastic_StatusMessage_fields, &ourStatus);
+        p->to = NODENUM_BROADCAST;
+        p->decoded.want_response = false;
+        p->priority = meshtastic_MeshPacket_Priority_BACKGROUND;
+        p->channel = 0;
+        service->sendToMesh(p);
+    }
+
+    return 1000 * 12 * 60 * 60;
+}
+
+ProcessMessage StatusMessageModule::handleReceived(const meshtastic_MeshPacket &mp)
+{
+    if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
+        meshtastic_StatusMessage incomingMessage;
+        if (pb_decode_from_bytes(mp.decoded.payload.bytes, mp.decoded.payload.size, meshtastic_StatusMessage_fields,
+                                 &incomingMessage)) {
+            LOG_INFO("Received a NodeStatus message %s", incomingMessage.status);
+        }
+    }
+    return ProcessMessage::CONTINUE;
+}
+
+#endif

src/modules/StatusMessageModule.h

@@ -0,0 +1,35 @@
+#pragma once
+#if !MESHTASTIC_EXCLUDE_STATUS
+#include "SinglePortModule.h"
+#include "configuration.h"
+
+class StatusMessageModule : public SinglePortModule, private concurrency::OSThread
+{
+
+  public:
+    /** Constructor
+     * name is for debugging output
+     */
+    StatusMessageModule()
+        : SinglePortModule("statusMessage", meshtastic_PortNum_NODE_STATUS_APP), concurrency::OSThread("StatusMessage")
+    {
+        if (moduleConfig.has_statusmessage && moduleConfig.statusmessage.node_status[0] != '\0') {
+            this->setInterval(2 * 60 * 1000);
+        } else {
+            this->setInterval(1000 * 12 * 60 * 60);
+        }
+        // TODO: If we have a string, set the initial delay (15 minutes maybe)
+    }
+
+    virtual int32_t runOnce() override;
+
+  protected:
+    /** Called to handle a particular incoming message
+     */
+    virtual ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override;
+
+  private:
+};
+
+extern StatusMessageModule *statusMessageModule;
+#endif

src/platform/portduino/PortduinoGlue.cpp

@@ -61,12 +61,11 @@ static error_t parse_opt(int key, char *arg, struct argp_state *state)
 {
     switch (key) {
     case 'p':
-        if (sscanf(arg, "%d", &TCPPort) < 1) {
+        if (sscanf(arg, "%d", &TCPPort) < 1)
             return ARGP_ERR_UNKNOWN;
-        } else {
+        else
             checkConfigPort = false;
-            printf("Using config file %d\n", TCPPort);
-        }
+        printf("Using config file %d\n", TCPPort);
         break;
     case 'c':
         configPath = arg;
@@ -650,19 +649,6 @@ bool loadConfig(const char *configPath)
             if (yamlConfig["Lora"]["RF95_MAX_POWER"])
                 portduino_config.rf95_max_power = yamlConfig["Lora"]["RF95_MAX_POWER"].as<int>(20);
 
-            if (yamlConfig["Lora"]["TX_GAIN_LORA"]) {
-                YAML::Node tx_gain_node = yamlConfig["Lora"]["TX_GAIN_LORA"];
-                if (tx_gain_node.IsSequence() && tx_gain_node.size() != 0) {
-                    portduino_config.num_pa_points = min(tx_gain_node.size(), std::size(portduino_config.tx_gain_lora));
-                    for (int i = 0; i < portduino_config.num_pa_points; i++) {
-                        portduino_config.tx_gain_lora[i] = tx_gain_node[i].as<int>();
-                    }
-                } else {
-                    portduino_config.num_pa_points = 1;
-                    portduino_config.tx_gain_lora[0] = tx_gain_node.as<int>(0);
-                }
-            }
-
             if (portduino_config.lora_module != use_autoconf && portduino_config.lora_module != use_simradio &&
                 !portduino_config.force_simradio) {
                 portduino_config.dio2_as_rf_switch = yamlConfig["Lora"]["DIO2_AS_RF_SWITCH"].as<bool>(false);
@@ -861,6 +847,7 @@ bool loadConfig(const char *configPath)
         }
 
         if (yamlConfig["Config"]) {
+            portduino_config.has_config_overrides = true;
             if (yamlConfig["Config"]["DisplayMode"]) {
                 portduino_config.has_configDisplayMode = true;
                 if ((yamlConfig["Config"]["DisplayMode"]).as<std::string>("") == "TWOCOLOR") {
@@ -873,6 +860,13 @@ bool loadConfig(const char *configPath)
                     portduino_config.configDisplayMode = meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT;
                 }
             }
+            if (yamlConfig["Config"]["StatusMessage"]) {
+                portduino_config.has_statusMessage = true;
+                portduino_config.statusMessage = (yamlConfig["Config"]["StatusMessage"]).as<std::string>("");
+            }
+            if ((yamlConfig["Config"]["EnableUDP"]).as<bool>(false)) {
+                portduino_config.enable_UDP = true;
+            }
         }
 
         if (yamlConfig["General"]) {

src/platform/portduino/PortduinoGlue.h

@@ -91,8 +91,6 @@ extern struct portduino_config_struct {
     int lora_usb_pid = 0x5512;
     int lora_usb_vid = 0x1A86;
     int spiSpeed = 2000000;
-    int num_pa_points = 1; // default to 1 point, with 0 gain
-    uint16_t tx_gain_lora[22] = {0};
     pinMapping lora_cs_pin = {"Lora", "CS"};
     pinMapping lora_irq_pin = {"Lora", "IRQ"};
     pinMapping lora_busy_pin = {"Lora", "Busy"};
@@ -170,8 +168,12 @@ extern struct portduino_config_struct {
     int hostMetrics_channel = 0;
 
     // config
+    bool has_config_overrides = false;
     int configDisplayMode = 0;
     bool has_configDisplayMode = false;
+    std::string statusMessage = "";
+    bool has_statusMessage = false;
+    bool enable_UDP = false;
 
     // General
     std::string mac_address = "";
@@ -233,17 +235,6 @@ extern struct portduino_config_struct {
             out << YAML::Key << "LR1120_MAX_POWER" << YAML::Value << lr1120_max_power;
         if (rf95_max_power != 20)
             out << YAML::Key << "RF95_MAX_POWER" << YAML::Value << rf95_max_power;
-
-        if (num_pa_points > 1) {
-            out << YAML::Key << "TX_GAIN_LORA" << YAML::Value << YAML::Flow << YAML::BeginSeq;
-            for (int i = 0; i < num_pa_points; i++) {
-                out << YAML::Value << tx_gain_lora[i];
-            }
-            out << YAML::EndSeq;
-        } else if (tx_gain_lora[0] != 0) {
-            out << YAML::Key << "TX_GAIN_LORA" << YAML::Value << tx_gain_lora[0];
-        }
-
         out << YAML::Key << "DIO2_AS_RF_SWITCH" << YAML::Value << dio2_as_rf_switch;
         if (dio3_tcxo_voltage != 0)
             out << YAML::Key << "DIO3_TCXO_VOLTAGE" << YAML::Value << YAML::Precision(3) << (float)dio3_tcxo_voltage / 1000;
@@ -498,21 +489,30 @@ extern struct portduino_config_struct {
         }
 
         // config
-        if (has_configDisplayMode) {
+        if (has_config_overrides) {
             out << YAML::Key << "Config" << YAML::Value << YAML::BeginMap;
-            switch (configDisplayMode) {
-            case meshtastic_Config_DisplayConfig_DisplayMode_TWOCOLOR:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "TWOCOLOR";
-                break;
-            case meshtastic_Config_DisplayConfig_DisplayMode_INVERTED:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "INVERTED";
-                break;
-            case meshtastic_Config_DisplayConfig_DisplayMode_COLOR:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "COLOR";
-                break;
-            case meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "DEFAULT";
-                break;
+            if (has_configDisplayMode) {
+
+                switch (configDisplayMode) {
+                case meshtastic_Config_DisplayConfig_DisplayMode_TWOCOLOR:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "TWOCOLOR";
+                    break;
+                case meshtastic_Config_DisplayConfig_DisplayMode_INVERTED:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "INVERTED";
+                    break;
+                case meshtastic_Config_DisplayConfig_DisplayMode_COLOR:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "COLOR";
+                    break;
+                case meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "DEFAULT";
+                    break;
+                }
+            }
+            if (has_statusMessage) {
+                out << YAML::Key << "StatusMessage" << YAML::Value << statusMessage;
+            }
+            if (enable_UDP) {
+                out << YAML::Key << "EnableUDP" << YAML::Value << true;
             }
 
             out << YAML::EndMap; // Config

variants/esp32s3/CDEBYTE_EoRa-Hub/rfswitch.h

@@ -8,8 +8,7 @@
 // DIO6 -> RFSW1_V2
 // DIO7 -> not connected on E80 module - note that GNSS and Wifi scanning are not possible.
 
-static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC,
-                                             RADIOLIB_NC};
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC, RADIOLIB_NC};
 
 static const Module::RfSwitchMode_t rfswitch_table[] = {
     // mode             DIO5  DIO6  DIO7