Don't reboot node simply for a StatusMessage config update

Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>

src/Power.cpp

@@ -723,16 +723,6 @@ bool Power::setup()
             runASAP = true;
         },
         CHANGE);
-#endif
-#ifdef EXT_CHRG_DETECT
-    attachInterrupt(
-        EXT_CHRG_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-        },
-        CHANGE);
 #endif
     enabled = found;
     low_voltage_counter = 0;

src/mesh/NodeDB.cpp

@@ -1410,6 +1410,15 @@ void NodeDB::loadFromDisk()
     if (portduino_config.has_configDisplayMode) {
         config.display.displaymode = (_meshtastic_Config_DisplayConfig_DisplayMode)portduino_config.configDisplayMode;
     }
+    if (portduino_config.has_statusMessage) {
+        moduleConfig.has_statusmessage = true;
+        strncpy(moduleConfig.statusmessage.node_status, portduino_config.statusMessage.c_str(),
+                sizeof(moduleConfig.statusmessage.node_status));
+        moduleConfig.statusmessage.node_status[sizeof(moduleConfig.statusmessage.node_status) - 1] = '\0';
+    }
+    if (portduino_config.enable_UDP) {
+        config.network.enabled_protocols = true;
+    }
 
 #endif
 }
@@ -1510,6 +1519,7 @@ bool NodeDB::saveToDiskNoRetry(int saveWhat)
         moduleConfig.has_ambient_lighting = true;
         moduleConfig.has_audio = true;
         moduleConfig.has_paxcounter = true;
+        moduleConfig.has_statusmessage = true;
 
         success &=
             saveProto(moduleConfigFileName, meshtastic_LocalModuleConfig_size, &meshtastic_LocalModuleConfig_msg, &moduleConfig);

src/mesh/generated/meshtastic/admin.pb.h

@@ -77,7 +77,9 @@ typedef enum _meshtastic_AdminMessage_ModuleConfigType {
     /* TODO: REPLACE */
     meshtastic_AdminMessage_ModuleConfigType_DETECTIONSENSOR_CONFIG = 11,
     /* TODO: REPLACE */
-    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12
+    meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG = 12,
+    /* TODO: REPLACE */
+    meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG = 13
 } meshtastic_AdminMessage_ModuleConfigType;
 
 typedef enum _meshtastic_AdminMessage_BackupLocation {
@@ -323,8 +325,8 @@ extern "C" {
 #define _meshtastic_AdminMessage_ConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ConfigType)(meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG+1))
 
 #define _meshtastic_AdminMessage_ModuleConfigType_MIN meshtastic_AdminMessage_ModuleConfigType_MQTT_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG
-#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG+1))
+#define _meshtastic_AdminMessage_ModuleConfigType_MAX meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG
+#define _meshtastic_AdminMessage_ModuleConfigType_ARRAYSIZE ((meshtastic_AdminMessage_ModuleConfigType)(meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG+1))
 
 #define _meshtastic_AdminMessage_BackupLocation_MIN meshtastic_AdminMessage_BackupLocation_FLASH
 #define _meshtastic_AdminMessage_BackupLocation_MAX meshtastic_AdminMessage_BackupLocation_SD

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -361,7 +361,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2279
+#define meshtastic_BackupPreferences_size        2362
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1737
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -87,6 +87,9 @@ typedef struct _meshtastic_LocalModuleConfig {
     /* Paxcounter Config */
     bool has_paxcounter;
     meshtastic_ModuleConfig_PaxcounterConfig paxcounter;
+    /* StatusMessage Config */
+    bool has_statusmessage;
+    meshtastic_ModuleConfig_StatusMessageConfig statusmessage;
 } meshtastic_LocalModuleConfig;
 
 
@@ -96,9 +99,9 @@ extern "C" {
 
 /* Initializer values for message structs */
 #define meshtastic_LocalConfig_init_default      {false, meshtastic_Config_DeviceConfig_init_default, false, meshtastic_Config_PositionConfig_init_default, false, meshtastic_Config_PowerConfig_init_default, false, meshtastic_Config_NetworkConfig_init_default, false, meshtastic_Config_DisplayConfig_init_default, false, meshtastic_Config_LoRaConfig_init_default, false, meshtastic_Config_BluetoothConfig_init_default, 0, false, meshtastic_Config_SecurityConfig_init_default}
-#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default}
+#define meshtastic_LocalModuleConfig_init_default {false, meshtastic_ModuleConfig_MQTTConfig_init_default, false, meshtastic_ModuleConfig_SerialConfig_init_default, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_default, false, meshtastic_ModuleConfig_StoreForwardConfig_init_default, false, meshtastic_ModuleConfig_RangeTestConfig_init_default, false, meshtastic_ModuleConfig_TelemetryConfig_init_default, false, meshtastic_ModuleConfig_CannedMessageConfig_init_default, 0, false, meshtastic_ModuleConfig_AudioConfig_init_default, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_default, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_default, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_default, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_default, false, meshtastic_ModuleConfig_PaxcounterConfig_init_default, false, meshtastic_ModuleConfig_StatusMessageConfig_init_default}
 #define meshtastic_LocalConfig_init_zero         {false, meshtastic_Config_DeviceConfig_init_zero, false, meshtastic_Config_PositionConfig_init_zero, false, meshtastic_Config_PowerConfig_init_zero, false, meshtastic_Config_NetworkConfig_init_zero, false, meshtastic_Config_DisplayConfig_init_zero, false, meshtastic_Config_LoRaConfig_init_zero, false, meshtastic_Config_BluetoothConfig_init_zero, 0, false, meshtastic_Config_SecurityConfig_init_zero}
-#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero}
+#define meshtastic_LocalModuleConfig_init_zero   {false, meshtastic_ModuleConfig_MQTTConfig_init_zero, false, meshtastic_ModuleConfig_SerialConfig_init_zero, false, meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero, false, meshtastic_ModuleConfig_StoreForwardConfig_init_zero, false, meshtastic_ModuleConfig_RangeTestConfig_init_zero, false, meshtastic_ModuleConfig_TelemetryConfig_init_zero, false, meshtastic_ModuleConfig_CannedMessageConfig_init_zero, 0, false, meshtastic_ModuleConfig_AudioConfig_init_zero, false, meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero, false, meshtastic_ModuleConfig_NeighborInfoConfig_init_zero, false, meshtastic_ModuleConfig_AmbientLightingConfig_init_zero, false, meshtastic_ModuleConfig_DetectionSensorConfig_init_zero, false, meshtastic_ModuleConfig_PaxcounterConfig_init_zero, false, meshtastic_ModuleConfig_StatusMessageConfig_init_zero}
 
 /* Field tags (for use in manual encoding/decoding) */
 #define meshtastic_LocalConfig_device_tag        1
@@ -124,6 +127,7 @@ extern "C" {
 #define meshtastic_LocalModuleConfig_ambient_lighting_tag 12
 #define meshtastic_LocalModuleConfig_detection_sensor_tag 13
 #define meshtastic_LocalModuleConfig_paxcounter_tag 14
+#define meshtastic_LocalModuleConfig_statusmessage_tag 15
 
 /* Struct field encoding specification for nanopb */
 #define meshtastic_LocalConfig_FIELDLIST(X, a) \
@@ -161,7 +165,8 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  remote_hardware,  10) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  neighbor_info,    11) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  ambient_lighting,  12) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  detection_sensor,  13) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
+X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  statusmessage,    15)
 #define meshtastic_LocalModuleConfig_CALLBACK NULL
 #define meshtastic_LocalModuleConfig_DEFAULT NULL
 #define meshtastic_LocalModuleConfig_mqtt_MSGTYPE meshtastic_ModuleConfig_MQTTConfig
@@ -177,6 +182,7 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  paxcounter,       14)
 #define meshtastic_LocalModuleConfig_ambient_lighting_MSGTYPE meshtastic_ModuleConfig_AmbientLightingConfig
 #define meshtastic_LocalModuleConfig_detection_sensor_MSGTYPE meshtastic_ModuleConfig_DetectionSensorConfig
 #define meshtastic_LocalModuleConfig_paxcounter_MSGTYPE meshtastic_ModuleConfig_PaxcounterConfig
+#define meshtastic_LocalModuleConfig_statusmessage_MSGTYPE meshtastic_ModuleConfig_StatusMessageConfig
 
 extern const pb_msgdesc_t meshtastic_LocalConfig_msg;
 extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
@@ -186,9 +192,9 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 #define meshtastic_LocalModuleConfig_fields &meshtastic_LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
+#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalModuleConfig_size
 #define meshtastic_LocalConfig_size              749
-#define meshtastic_LocalModuleConfig_size        675
+#define meshtastic_LocalModuleConfig_size        758
 
 #ifdef __cplusplus
 } /* extern "C" */

src/modules/AdminModule.cpp

@@ -905,10 +905,11 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
 
 bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
 {
+    bool shouldReboot = true;
     // If we are in an open transaction or configuring MQTT or Serial (which have validation), defer disabling Bluetooth
     // Otherwise, disable Bluetooth to prevent the phone from interfering with the config
-    if (!hasOpenEditTransaction &&
-        !IS_ONE_OF(c.which_payload_variant, meshtastic_ModuleConfig_mqtt_tag, meshtastic_ModuleConfig_serial_tag)) {
+    if (!hasOpenEditTransaction && !IS_ONE_OF(c.which_payload_variant, meshtastic_ModuleConfig_mqtt_tag,
+                                              meshtastic_ModuleConfig_serial_tag, meshtastic_ModuleConfig_statusmessage_tag)) {
         disableBluetooth();
     }
 
@@ -1000,8 +1001,14 @@ bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
         moduleConfig.has_paxcounter = true;
         moduleConfig.paxcounter = c.payload_variant.paxcounter;
         break;
+    case meshtastic_ModuleConfig_statusmessage_tag:
+        LOG_INFO("Set module config: StatusMessage");
+        moduleConfig.has_statusmessage = true;
+        moduleConfig.statusmessage = c.payload_variant.statusmessage;
+        shouldReboot = false;
+        break;
     }
-    saveChanges(SEGMENT_MODULECONFIG);
+    saveChanges(SEGMENT_MODULECONFIG, shouldReboot);
     return true;
 }
 
@@ -1180,6 +1187,11 @@ void AdminModule::handleGetModuleConfig(const meshtastic_MeshPacket &req, const
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag;
             res.get_module_config_response.payload_variant.paxcounter = moduleConfig.paxcounter;
             break;
+        case meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG:
+            LOG_INFO("Get module config: StatusMessage");
+            res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_statusmessage_tag;
+            res.get_module_config_response.payload_variant.statusmessage = moduleConfig.statusmessage;
+            break;
         }
 
         // NOTE: The phone app needs to know the ls_secsvalue so it can properly expect sleep behavior.

src/modules/Modules.cpp

@@ -108,6 +108,9 @@
 #if !MESHTASTIC_EXCLUDE_DROPZONE
 #include "modules/DropzoneModule.h"
 #endif
+#if !MESHTASTIC_EXCLUDE_STATUS
+#include "modules/StatusMessageModule.h"
+#endif
 
 /**
  * Create module instances here.  If you are adding a new module, you must 'new' it here (or somewhere else)
@@ -165,6 +168,9 @@ void setupModules()
 #if !MESHTASTIC_EXCLUDE_DROPZONE
     dropzoneModule = new DropzoneModule();
 #endif
+#if !MESHTASTIC_EXCLUDE_STATUS
+    statusMessageModule = new StatusMessageModule();
+#endif
 #if !MESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE
     new GenericThreadModule();
 #endif

src/modules/NodeInfoModule.cpp

@@ -2,7 +2,6 @@
 #include "Default.h"
 #include "MeshService.h"
 #include "NodeDB.h"
-#include "NodeStatus.h"
 #include "RTC.h"
 #include "Router.h"
 #include "configuration.h"
@@ -130,17 +129,14 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
         LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
         return NULL;
     }
-
-    // Use graduated scaling based on active mesh size (10 minute base, scales with congestion coefficient)
-    uint32_t timeoutMs = Default::getConfiguredOrDefaultMsScaled(0, 10 * 60, nodeStatus->getNumOnline());
-    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, timeoutMs)) {
-        LOG_DEBUG("Skip send NodeInfo since we sent it <%us ago", timeoutMs / 1000);
+    // If we sent our NodeInfo less than 5 min. ago, don't send it again as it may be still underway.
+    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 5 * 60 * 1000)) {
+        LOG_DEBUG("Skip send NodeInfo since we sent it <5min ago");
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else if (shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 60 * 1000)) {
-        // For interactive/urgent requests (e.g., user-triggered or implicit requests), use a shorter 60s timeout
         LOG_DEBUG("Skip send NodeInfo since we sent it <60s ago");
-        ignoreRequest = true;
+        ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else {
         ignoreRequest = false; // Don't ignore requests anymore

src/modules/StatusMessageModule.cpp

@@ -0,0 +1,41 @@
+#if !MESHTASTIC_EXCLUDE_STATUS
+
+#include "StatusMessageModule.h"
+#include "MeshService.h"
+#include "ProtobufModule.h"
+
+StatusMessageModule *statusMessageModule;
+
+int32_t StatusMessageModule::runOnce()
+{
+    if (moduleConfig.has_statusmessage && moduleConfig.statusmessage.node_status[0] != '\0') {
+        // create and send message with the status message set
+        meshtastic_StatusMessage ourStatus = meshtastic_StatusMessage_init_zero;
+        strncpy(ourStatus.status, moduleConfig.statusmessage.node_status, sizeof(ourStatus.status));
+        ourStatus.status[sizeof(ourStatus.status) - 1] = '\0'; // ensure null termination
+        meshtastic_MeshPacket *p = allocDataPacket();
+        p->decoded.payload.size = pb_encode_to_bytes(p->decoded.payload.bytes, sizeof(p->decoded.payload.bytes),
+                                                     meshtastic_StatusMessage_fields, &ourStatus);
+        p->to = NODENUM_BROADCAST;
+        p->decoded.want_response = false;
+        p->priority = meshtastic_MeshPacket_Priority_BACKGROUND;
+        p->channel = 0;
+        service->sendToMesh(p);
+    }
+
+    return 1000 * 12 * 60 * 60;
+}
+
+ProcessMessage StatusMessageModule::handleReceived(const meshtastic_MeshPacket &mp)
+{
+    if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
+        meshtastic_StatusMessage incomingMessage;
+        if (pb_decode_from_bytes(mp.decoded.payload.bytes, mp.decoded.payload.size, meshtastic_StatusMessage_fields,
+                                 &incomingMessage)) {
+            LOG_INFO("Received a NodeStatus message %s", incomingMessage.status);
+        }
+    }
+    return ProcessMessage::CONTINUE;
+}
+
+#endif

src/modules/StatusMessageModule.h

@@ -0,0 +1,35 @@
+#pragma once
+#if !MESHTASTIC_EXCLUDE_STATUS
+#include "SinglePortModule.h"
+#include "configuration.h"
+
+class StatusMessageModule : public SinglePortModule, private concurrency::OSThread
+{
+
+  public:
+    /** Constructor
+     * name is for debugging output
+     */
+    StatusMessageModule()
+        : SinglePortModule("statusMessage", meshtastic_PortNum_NODE_STATUS_APP), concurrency::OSThread("StatusMessage")
+    {
+        if (moduleConfig.has_statusmessage && moduleConfig.statusmessage.node_status[0] != '\0') {
+            this->setInterval(2 * 60 * 1000);
+        } else {
+            this->setInterval(1000 * 12 * 60 * 60);
+        }
+        // TODO: If we have a string, set the initial delay (15 minutes maybe)
+    }
+
+    virtual int32_t runOnce() override;
+
+  protected:
+    /** Called to handle a particular incoming message
+     */
+    virtual ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override;
+
+  private:
+};
+
+extern StatusMessageModule *statusMessageModule;
+#endif

src/platform/portduino/PortduinoGlue.cpp

@@ -65,7 +65,7 @@ static error_t parse_opt(int key, char *arg, struct argp_state *state)
             return ARGP_ERR_UNKNOWN;
         else
             checkConfigPort = false;
-            printf("Using config file %d\n", TCPPort);
+        printf("Using config file %d\n", TCPPort);
         break;
     case 'c':
         configPath = arg;
@@ -847,6 +847,7 @@ bool loadConfig(const char *configPath)
         }
 
         if (yamlConfig["Config"]) {
+            portduino_config.has_config_overrides = true;
             if (yamlConfig["Config"]["DisplayMode"]) {
                 portduino_config.has_configDisplayMode = true;
                 if ((yamlConfig["Config"]["DisplayMode"]).as<std::string>("") == "TWOCOLOR") {
@@ -859,6 +860,13 @@ bool loadConfig(const char *configPath)
                     portduino_config.configDisplayMode = meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT;
                 }
             }
+            if (yamlConfig["Config"]["StatusMessage"]) {
+                portduino_config.has_statusMessage = true;
+                portduino_config.statusMessage = (yamlConfig["Config"]["StatusMessage"]).as<std::string>("");
+            }
+            if ((yamlConfig["Config"]["EnableUDP"]).as<bool>(false)) {
+                portduino_config.enable_UDP = true;
+            }
         }
 
         if (yamlConfig["General"]) {
@@ -874,10 +882,8 @@ bool loadConfig(const char *configPath)
             }
             if (checkConfigPort) {
                 portduino_config.api_port = (yamlConfig["General"]["APIPort"]).as<int>(-1);
-                if (portduino_config.api_port != -1 &&
-                portduino_config.api_port > 1023 &&
-                portduino_config.api_port < 65536) {
-                TCPPort = (portduino_config.api_port);
+                if (portduino_config.api_port != -1 && portduino_config.api_port > 1023 && portduino_config.api_port < 65536) {
+                    TCPPort = (portduino_config.api_port);
                 }
             }
             portduino_config.mac_address = (yamlConfig["General"]["MACAddress"]).as<std::string>("");

src/platform/portduino/PortduinoGlue.h

@@ -168,8 +168,12 @@ extern struct portduino_config_struct {
     int hostMetrics_channel = 0;
 
     // config
+    bool has_config_overrides = false;
     int configDisplayMode = 0;
     bool has_configDisplayMode = false;
+    std::string statusMessage = "";
+    bool has_statusMessage = false;
+    bool enable_UDP = false;
 
     // General
     std::string mac_address = "";
@@ -485,21 +489,30 @@ extern struct portduino_config_struct {
         }
 
         // config
-        if (has_configDisplayMode) {
+        if (has_config_overrides) {
             out << YAML::Key << "Config" << YAML::Value << YAML::BeginMap;
-            switch (configDisplayMode) {
-            case meshtastic_Config_DisplayConfig_DisplayMode_TWOCOLOR:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "TWOCOLOR";
-                break;
-            case meshtastic_Config_DisplayConfig_DisplayMode_INVERTED:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "INVERTED";
-                break;
-            case meshtastic_Config_DisplayConfig_DisplayMode_COLOR:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "COLOR";
-                break;
-            case meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT:
-                out << YAML::Key << "DisplayMode" << YAML::Value << "DEFAULT";
-                break;
+            if (has_configDisplayMode) {
+
+                switch (configDisplayMode) {
+                case meshtastic_Config_DisplayConfig_DisplayMode_TWOCOLOR:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "TWOCOLOR";
+                    break;
+                case meshtastic_Config_DisplayConfig_DisplayMode_INVERTED:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "INVERTED";
+                    break;
+                case meshtastic_Config_DisplayConfig_DisplayMode_COLOR:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "COLOR";
+                    break;
+                case meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT:
+                    out << YAML::Key << "DisplayMode" << YAML::Value << "DEFAULT";
+                    break;
+                }
+            }
+            if (has_statusMessage) {
+                out << YAML::Key << "StatusMessage" << YAML::Value << statusMessage;
+            }
+            if (enable_UDP) {
+                out << YAML::Key << "EnableUDP" << YAML::Value << true;
             }
 
             out << YAML::EndMap; // Config

variants/esp32/chatter2/platformio.ini

@@ -6,8 +6,6 @@ build_flags =
   ${esp32_base.build_flags}
   -D CHATTER_2
   -I variants/esp32/chatter2
-  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   
 lib_deps =
   ${esp32_base.lib_deps}

variants/esp32/m5stack_core/platformio.ini

@@ -16,8 +16,6 @@ build_flags =
   ${esp32_base.build_flags}
   -I variants/esp32/m5stack_core
   -DM5STACK
-  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   -DUSER_SETUP_LOADED
   -DTFT_SDA_READ
   -DTFT_DRIVER=0x9341

variants/stm32/russell/platformio.ini

@@ -0,0 +1,21 @@
+; Russell is a board designed to mount on an ER34615/IFR32700 cell and go Up! on a balloon
+; Hardware repository: https://github.com/Meshtastic-Malaysia/russell
+; - RAK3172 STM32WLE5CCU6 MCU + integrated SX1262 LoRa
+; - CDtop CD-PA1010D GPS
+; - Bosch Sensortec BME280 sensor
+; - Consonance CN3158 LiFePO4 solar charger
+[env:russell]
+extends = stm32_base
+board = wiscore_rak3172
+board_level = extra
+board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
+build_flags =
+  ${stm32_base.build_flags}
+  -Ivariants/stm32/russell
+  -DPRIVATE_HW
+lib_deps =
+  ${stm32_base.lib_deps}
+	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
+	adafruit/Adafruit BME280 Library@2.3.0
+
+upload_port = stlink

variants/stm32/russell/rfswitch.h

@@ -0,0 +1,7 @@
+// Pins from https://forum.rakwireless.com/t/rak3172-internal-schematic/4557/2
+// PB8, PC13
+
+static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PB8, PC13, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[4] = {
+    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

variants/stm32/russell/variant.h

@@ -0,0 +1,41 @@
+#ifndef _VARIANT_RUSSELL_
+#define _VARIANT_RUSSELL_
+
+#define USE_STM32WLx
+
+// I/O
+#define LED_PIN PA0 // Red LED
+#define LED_STATE_ON 1
+#define BUTTON_PIN PH3 // Shared with BOOT0
+#define BUTTON_NEED_PULLUP
+// Charger IC charge/standby pins are open-drain with no hardware pull-up:
+// Internal pull-up is needed on STM32 (TODO)
+// #define EXT_CHRG_DETECT PA5
+// #define EXT_PWR_DETECT PA4
+
+// Bosch Sensortec BME280
+#define HAS_SENSOR 1
+
+// CDtop CD-PA1010D
+#define ENABLE_HWSERIAL1
+#define PIN_SERIAL1_RX PB7
+#define PIN_SERIAL1_TX PB6
+#define HAS_GPS 1
+#define PIN_GPS_STANDBY PA15
+#define GPS_RX_PIN PB7
+#define GPS_TX_PIN PB6
+
+// LoRa
+/*
+ * RAK3172   (-20–85°C) -> No TCXO
+ * RAK3172-T (-40–85°C) -> 3.0V TCXO
+ * https://github.com/RAKWireless/RAK-STM32-RUI/blob/e5a28be8fab1a492bd9223dd425ca33a8a297d90/variants/WisDuo_RAK3172-T_Board/radio_conf.h#L91
+ */
+#define TCXO_OPTIONAL
+#define SX126X_DIO3_TCXO_VOLTAGE 3.0
+
+// Required to avoid Serial1 conflicts due to board definition here:
+// https://github.com/stm32duino/Arduino_Core_STM32/blob/main/variants/STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U/variant_RAK3172_MODULE.h
+#define RAK3172
+
+#endif