add conffiles to .deb packaging (#3722)

* Add portduino Ebyte E22 XXXM30S/XXXM33S (sx1268) module support

* Add Ebyte E22 XXXM3XS module config

* Update comment for sx1268 module

* Address review comments

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.github/workflows/main_matrix.yml

@@ -100,6 +100,7 @@ jobs:
           - board: t-deck
           - board: picomputer-s3
           - board: station-g2
+          - board: unphone
     uses: ./.github/workflows/build_esp32_s3.yml
     with:
       board: ${{ matrix.board }}

.github/workflows/package_raspbian.yml

@@ -45,6 +45,7 @@ jobs:
 
       - name: build .debpkg
         run: |
+          mkdir -p .debpkg/debian
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
@@ -55,6 +56,7 @@ jobs:
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "etc/meshtasticd/config.yaml" > .debpkg/debian/conffiles
 
       - uses: jiro4989/build-deb-action@v3
         with:

.github/workflows/update_protobufs.yml

@@ -17,9 +17,9 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.7-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.7-linux-x86.tar.gz
-          mv nanopb-0.4.7-linux-x86 nanopb-0.4.7
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
 
       - name: Re-generate protocol buffers
         run: |

Dockerfile

@@ -1,4 +1,4 @@
-FROM debian:bullseye-slim AS builder
+FROM debian:bookworm-slim AS builder
 
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -11,31 +11,45 @@ SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 
 # Install build deps
 USER root
-RUN apt-get update && \
-	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev
 
-# create a non-priveleged user & group
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
+                           ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
+                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
+
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
+USER mesh
+
+WORKDIR /tmp/firmware
+RUN python3 -m venv /tmp/firmware 
+RUN source ./bin/activate && pip3 install --no-cache-dir -U platformio==6.1.14
+# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
+COPY --chown=mesh:mesh . /tmp/firmware
+RUN source ./bin/activate && chmod +x /tmp/firmware/bin/build-native.sh && ./bin/build-native.sh
+RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+
+
+##### PRODUCTION BUILD #############
+
+FROM debian:bookworm-slim
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Etc/UTC
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/*
+
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
 USER mesh
-RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py -qO /tmp/get-platformio.py && \
-	chmod +x /tmp/get-platformio.py && \
-	python3 /tmp/get-platformio.py && \
-	git clone https://github.com/meshtastic/firmware --recurse-submodules /tmp/firmware && \
-	cd /tmp/firmware && \
-	chmod +x /tmp/firmware/bin/build-native.sh && \
-	source ~/.platformio/penv/bin/activate && \
-	./bin/build-native.sh
 
-FROM frolvlad/alpine-glibc:glibc-2.31
-
-RUN apk --update add --no-cache g++ shadow && \
-	groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
-COPY --from=builder /tmp/firmware/release/meshtasticd_linux_x86_64 /home/mesh/
-
-USER mesh
 WORKDIR /home/mesh
-CMD sh -cx "./meshtasticd_linux_x86_64 --hwid '${HWID:-$RANDOM}'"
+COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/
 
-HEALTHCHECK NONE
+VOLUME /home/mesh/data
+
+CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]
+
+HEALTHCHECK NONE

arch/esp32/esp32s2.ini

@@ -2,14 +2,17 @@
 extends = esp32_base
 
 build_src_filter = 
-  ${esp32_base.build_src_filter} -<nimble/> -<mesh/raspihttp>
+ ${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
 
 monitor_speed = 115200
 
 build_flags =
   ${esp32_base.build_flags} 
   -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
   
 lib_ignore = 
   ${esp32_base.lib_ignore} 
-  NimBLE-Arduino
+  NimBLE-Arduino
+  libpax

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#1b8a32c60ab7495026033858d53c737f7d1cb34a
+platform = https://github.com/meshtastic/platform-native.git#659e49346aa33008b150dfb206b1817ddabc7132
 framework = arduino
 
 build_src_filter = 
@@ -24,7 +24,7 @@ lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-  lovyan03/LovyanGFX@^1.1.12
+  https://github.com/lovyan03/LovyanGFX.git#d35e60f269dfecbb18a8cb0fd07d594c2fb7e7a8
 
 build_flags =
   ${arduino_base.build_flags}

bin/build-native.sh

@@ -13,8 +13,8 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update
+platformio pkg update --environment native
 pio run --environment native
-cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(arch)"
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/config-dist.yaml

@@ -1,5 +1,6 @@
 ### Define your devices here using Broadcom pin numbering
 ### Uncomment the block that corresponds to your hardware
+### Including the "Module:" line!
 ---
 Lora:
 #  Module: sx1262  # Waveshare SX126X XXXM
@@ -37,6 +38,15 @@ Lora:
 #  Busy: 20
 #  Reset: 18
 
+#  Module: sx1268  # SX1268-based modules, tested with Ebyte E22 400M33S
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+#  TXen: 6
+#  RXen: 12
+#  DIO3_TCXO_VOLTAGE: true
+
 #  DIO3_TCXO_VOLTAGE: true  # the Waveshare Core1262 and others are known to need this setting
 
 #  TXen: x  # TX and RX enable pins
@@ -95,23 +105,29 @@ Display:
 #  Panel: ILI9341
 #  CS: 8
 #  DC: 25
-#  Backlight: 2
-#  Width: 320
-#  Height: 240
+#  Width: 240
+#  Height: 320
+#  Rotate: true
 
 Touchscreen:
-#  Module: STMPE610
+### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
+
+#  Module: STMPE610 # Option 1 for Adafruit PiTFT 2.8
 #  CS: 7
 #  IRQ: 24
 
-#  Module: XPT2046
+#  Module: FT5x06 # Option 2 for Adafruit PiTFT 2.8
+#  IRQ: 24
+#  I2CAddr: 0x38
+
+#  Module: XPT2046 # Waveshare 2.8inch
 #  CS: 7
 #  IRQ: 17
 
 ### Configure device for direct keyboard input
 
 Input:
-#  KeyboardDevice: /dev/input/event0
+#  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
 ###
 

bin/device-install.bat

@@ -32,7 +32,7 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 and C3 board's different OTA partition
-    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% (
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
         IF x%FILENAME:esp32c3=%==x%FILENAME% (
             %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
         ) else (

bin/device-install.sh

@@ -52,7 +52,7 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	"$PYTHON" -m esptool erase_flash
 	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
-	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ]; then
+	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
 		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
 			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
 		else

bin/native-install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-cp "release/meshtasticd_linux_$(arch)" /usr/sbin/meshtasticd
+cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
 mkdir /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated\" -I=..\protobufs ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,18 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.7 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.7"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.7/generator-bin/protoc "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto --experimental_allow_proto3_optional
-
-# sed -i 's/#include "meshtastic/#include "./g' -- *
-
-# sed -i 's/meshtastic_//g' -- *
-
-#echo "Regenerating protobuf documentation - if you see an error message"
-#echo "you can ignore it unless doing a new protobuf release to github."
-#bin/regen-docs.sh
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

boards/CDEBYTE_EoRa-S3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D CDEBYTE_EORA_S3",
+      "-D ARDUINO_USB_CDC_ON_BOOT=1",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1",
+      "-D BOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "CDEBYTE_EoRa-S3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "CDEBYTE EoRa-S3",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.cdebyte.com/Module-Testkits-EoRaPI",
+  "vendor": "CDEBYTE"
+}

boards/ESP32-S3-WROOM-1-N4.json

@@ -0,0 +1,39 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D ARDUINO_USB_CDC_ON_BOOT=0",
+      "-D ARDUINO_USB_MSC_ON_BOOT=0",
+      "-D ARDUINO_USB_DFU_ON_BOOT=0",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "ESP32-S3-WROOM-1-N4"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-WROOM-1-N4 (4 MB Flash, No PSRAM)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 524288,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
+  "vendor": "Espressif"
+}

boards/tbeam-s3-core.json

@@ -7,8 +7,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DLILYGO_TBEAM_S3_CORE",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

platformio.ini

@@ -74,11 +74,11 @@ build_flags = -Wno-missing-field-initializers
 monitor_speed = 115200
 
 lib_deps =
-  jgromes/RadioLib@^6.4.0
+  jgromes/RadioLib@~6.5.0
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#ee628ee6c9588d4c56c9e3da35f0fc9448ad54a8 ; ESP8266_SSD1306
   mathertel/OneButton@^2.5.0 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#f9f4fef2183514aa52be91d714c1455dd6f26e45
+  https://github.com/meshtastic/TinyGPSPlus.git#964f75a72cccd6b53cd74e4add1f7a42c6f7344d
   https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
   nanopb/Nanopb@^0.4.7
   erriez/ErriezCRC32@^1.0.1
@@ -132,3 +132,4 @@ lib_deps =
   adafruit/Adafruit MPU6050@^2.2.4
   adafruit/Adafruit LIS3DH@^1.2.4
   https://github.com/lewisxhe/SensorLib#27fd0f721e20cd09e1f81383f0ba58a54fe84a17
+  adafruit/Adafruit LSM6DS@^4.7.2

src/AccelerometerThread.h

@@ -5,6 +5,7 @@
 #include "power.h"
 
 #include <Adafruit_LIS3DH.h>
+#include <Adafruit_LSM6DS3TRC.h>
 #include <Adafruit_MPU6050.h>
 #include <Arduino.h>
 #include <SensorBMA423.hpp>
@@ -108,6 +109,15 @@ class AccelerometerThread : public concurrency::OSThread
             bmaSensor.enableTiltIRQ();
             // It corresponds to isDoubleClick interrupt
             bmaSensor.enableWakeupIRQ();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.begin_I2C(accelerometer_found.address)) {
+            LOG_DEBUG("LSM6DS3 initializing\n");
+            // Default threshold of 2G, less sensitive options are 4, 8 or 16G
+            lsm.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
+#ifndef LSM6DS3_WAKE_THRESH
+#define LSM6DS3_WAKE_THRESH 20
+#endif
+            lsm.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
+            // Duration is number of occurances needed to trigger, higher threshold is less sensitive
         }
     }
 
@@ -133,6 +143,9 @@ class AccelerometerThread : public concurrency::OSThread
                 wakeScreen();
                 return 500;
             }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.shake()) {
+            wakeScreen();
+            return 500;
         }
 
         return ACCELEROMETER_CHECK_INTERVAL_MS;
@@ -156,6 +169,7 @@ class AccelerometerThread : public concurrency::OSThread
     ScanI2C::DeviceType acceleremoter_type;
     Adafruit_MPU6050 mpu;
     Adafruit_LIS3DH lis;
+    Adafruit_LSM6DS3TRC lsm;
 };
 
-} // namespace concurrency
+} // namespace concurrency

src/AmbientLightingThread.h

@@ -5,6 +5,16 @@
 NCP5623 rgb;
 #endif
 
+#ifdef HAS_NEOPIXEL
+#include <graphics/NeoPixel.h>
+Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
+#endif
+
+#ifdef UNPHONE
+#include "unPhone.h"
+extern unPhone unphone;
+#endif
+
 namespace concurrency
 {
 class AmbientLightingThread : public concurrency::OSThread
@@ -27,15 +37,31 @@ class AmbientLightingThread : public concurrency::OSThread
             disable();
             return;
         }
+#endif
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
         if (!moduleConfig.ambient_lighting.led_state) {
             LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
             disable();
             return;
         }
         LOG_DEBUG("AmbientLightingThread initializing\n");
+#ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
+#endif
+#ifdef RGBLED_RED
+            pinMode(RGBLED_RED, OUTPUT);
+            pinMode(RGBLED_GREEN, OUTPUT);
+            pinMode(RGBLED_BLUE, OUTPUT);
+#endif
+#ifdef HAS_NEOPIXEL
+            pixels.begin(); // Initialise the pixel(s)
+            pixels.clear(); // Set all pixel colors to 'off'
+            pixels.setBrightness(moduleConfig.ambient_lighting.current);
+#endif
             setLighting();
+#endif
+#ifdef HAS_NCP5623
         }
 #endif
     }
@@ -43,16 +69,17 @@ class AmbientLightingThread : public concurrency::OSThread
   protected:
     int32_t runOnce() override
     {
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
 #ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+#endif
             setLighting();
             return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
-        } else {
-            return disable();
+#ifdef HAS_NCP5623
         }
-#else
-        return disable();
 #endif
+#endif
+        return disable();
     }
 
   private:
@@ -65,9 +92,36 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(moduleConfig.ambient_lighting.red);
         rgb.setGreen(moduleConfig.ambient_lighting.green);
         rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
+        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                   moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef HAS_NEOPIXEL
+        pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                 moduleConfig.ambient_lighting.blue),
+                    0, NEOPIXEL_COUNT);
+        pixels.show();
+        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef RGBLED_CA
+        analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#elif defined(RGBLED_RED)
+        analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef UNPHONE
+        unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d\n", moduleConfig.ambient_lighting.red,
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
     }
 };

src/ButtonThread.cpp

@@ -23,18 +23,24 @@
 
 using namespace concurrency;
 
+ButtonThread *buttonThread; // Declared extern in header
 volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
 
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+OneButton ButtonThread::userButton; // Get reference to static member
+#endif
+
 ButtonThread::ButtonThread() : OSThread("Button")
 {
-#if defined(ARCH_PORTDUINO) || defined(BUTTON_PIN)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+
 #if defined(ARCH_PORTDUINO)
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
-        userButton = OneButton(settingsMap[user], true, true);
+        this->userButton = OneButton(settingsMap[user], true, true);
         LOG_DEBUG("Using GPIO%02d for button\n", settingsMap[user]);
     }
 #elif defined(BUTTON_PIN)
-    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;
+    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
     this->userButton = OneButton(pin, true, true);
     LOG_DEBUG("Using GPIO%02d for button\n", pin);
 #endif
@@ -43,31 +49,20 @@ ButtonThread::ButtonThread() : OSThread("Button")
     // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
     pinMode(pin, INPUT_PULLUP_SENSE);
 #endif
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
     userButton.attachClick(userButtonPressed);
     userButton.setClickMs(250);
     userButton.setPressMs(c_longPressTime);
     userButton.setDebounceMs(1);
     userButton.attachDoubleClick(userButtonDoublePressed);
-    userButton.attachMultiClick(userButtonMultiPressed);
+    userButton.attachMultiClick(userButtonMultiPressed, this); // Reference to instance: get click count from non-static OneButton
 #ifndef T_DECK // T-Deck immediately wakes up after shutdown, so disable this function
     userButton.attachLongPressStart(userButtonPressedLongStart);
     userButton.attachLongPressStop(userButtonPressedLongStop);
 #endif
-#if defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
-        wakeOnIrq(settingsMap[user], FALLING);
-#else
-    static OneButton *pBtn = &userButton; // only one instance of ButtonThread is created, so static is safe
-    attachInterrupt(
-        pin,
-        []() {
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-            pBtn->tick();
-        },
-        CHANGE);
-#endif
 #endif
+
 #ifdef BUTTON_PIN_ALT
     userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
 #ifdef INPUT_PULLUP_SENSE
@@ -81,13 +76,15 @@ ButtonThread::ButtonThread() : OSThread("Button")
     userButtonAlt.attachDoubleClick(userButtonDoublePressed);
     userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
     userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
-    wakeOnIrq(BUTTON_PIN_ALT, FALLING);
 #endif
 
 #ifdef BUTTON_PIN_TOUCH
     userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
-    userButtonTouch.attachClick(touchPressed);
-    wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
+    userButtonTouch.setPressMs(400);
+    userButtonTouch.attachLongPressStart(touchPressedLongStart); // Better handling with longpress than click?
+#endif
+
+    attachButtonInterrupts();
 #endif
 }
 
@@ -138,26 +135,42 @@ int32_t ButtonThread::runOnce()
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
             LOG_BUTTON("Double press!\n");
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
-            digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-#endif
             service.refreshLocalMeshNode();
             service.sendNetworkPing(NODENUM_BROADCAST, true);
-            if (screen)
+            if (screen) {
                 screen->print("Sent ad-hoc ping\n");
-            break;
-        }
-#if HAS_GPS
-        case BUTTON_EVENT_MULTI_PRESSED: {
-            LOG_BUTTON("Multi press!\n");
-            if (!config.device.disable_triple_click && (gps != nullptr)) {
-                gps->toggleGpsMode();
-                if (screen)
-                    screen->forceDisplay();
+                screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
             }
             break;
         }
+
+        case BUTTON_EVENT_MULTI_PRESSED: {
+            LOG_BUTTON("Mulitipress! %hux\n", multipressClickCount);
+            switch (multipressClickCount) {
+#if HAS_GPS
+            // 3 clicks: toggle GPS
+            case 3:
+                if (!config.device.disable_triple_click && (gps != nullptr)) {
+                    gps->toggleGpsMode();
+                    if (screen)
+                        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+                }
+                break;
 #endif
+#if defined(USE_EINK) && defined(PIN_EINK_EN) // i.e. T-Echo
+            // 4 clicks: toggle backlight
+            case 4:
+                digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
+                break;
+#endif
+            // No valid multipress action
+            default:
+                break;
+            } // end switch: click count
+
+            break;
+        } // end multipress event
+
         case BUTTON_EVENT_LONG_PRESSED: {
             LOG_BUTTON("Long press!\n");
             powerFSM.trigger(EVENT_PRESS);
@@ -176,12 +189,24 @@ int32_t ButtonThread::runOnce()
             power->shutdown();
             break;
         }
-        case BUTTON_EVENT_TOUCH_PRESSED: {
+
+#ifdef BUTTON_PIN_TOUCH
+        case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
             LOG_BUTTON("Touch press!\n");
-            if (screen)
-                screen->forceDisplay();
+            if (config.display.wake_on_tap_or_motion) {
+                if (screen) {
+                    // Wake if asleep
+                    if (powerFSM.getState() == &stateDARK)
+                        powerFSM.trigger(EVENT_PRESS);
+
+                    // Update display (legacy behaviour)
+                    screen->forceDisplay();
+                }
+            }
             break;
         }
+#endif // BUTTON_PIN_TOUCH
+
         default:
             break;
         }
@@ -191,6 +216,58 @@ int32_t ButtonThread::runOnce()
     return 50;
 }
 
+/*
+ * Attach (or re-attach) hardware interrupts for buttons
+ * Public method. Used outside class when waking from MCU sleep
+ */
+void ButtonThread::attachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        wakeOnIrq(settingsMap[user], FALLING);
+#elif defined(BUTTON_PIN)
+    // Interrupt for user button, during normal use. Improves responsiveness.
+    attachInterrupt(
+        config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
+        []() {
+            BaseType_t higherWake = 0;
+            mainDelay.interruptFromISR(&higherWake);
+            ButtonThread::userButton.tick();
+        },
+        CHANGE);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    wakeOnIrq(BUTTON_PIN_ALT, FALLING);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
+#endif
+}
+
+/*
+ * Detach the "normal" button interrupts.
+ * Public method. Used before attaching a "wake-on-button" interrupt for MCU sleep
+ */
+void ButtonThread::detachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        detachInterrupt(settingsMap[user]);
+#elif defined(BUTTON_PIN)
+    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    detachInterrupt(BUTTON_PIN_ALT);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    detachInterrupt(BUTTON_PIN_TOUCH);
+#endif
+}
+
 /**
  * Watch a GPIO and if we get an IRQ, wake the main thread.
  * Use to add wake on button press
@@ -206,6 +283,25 @@ void ButtonThread::wakeOnIrq(int irq, int mode)
         FALLING);
 }
 
+// Static callback
+void ButtonThread::userButtonMultiPressed(void *callerThread)
+{
+    // Grab click count from non-static button, while the info is still valid
+    ButtonThread *thread = (ButtonThread *)callerThread;
+    thread->storeClickCount();
+
+    // Then handle later, in the usual way
+    btnEvent = BUTTON_EVENT_MULTI_PRESSED;
+}
+
+// Non-static method, runs during callback. Grabs info while still valid
+void ButtonThread::storeClickCount()
+{
+#ifdef BUTTON_PIN
+    multipressClickCount = userButton.getNumberClicks();
+#endif
+}
+
 void ButtonThread::userButtonPressedLongStart()
 {
     if (millis() > c_holdOffTime) {

src/ButtonThread.h

@@ -17,15 +17,18 @@ class ButtonThread : public concurrency::OSThread
         BUTTON_EVENT_MULTI_PRESSED,
         BUTTON_EVENT_LONG_PRESSED,
         BUTTON_EVENT_LONG_RELEASED,
-        BUTTON_EVENT_TOUCH_PRESSED
+        BUTTON_EVENT_TOUCH_LONG_PRESSED,
     };
 
     ButtonThread();
     int32_t runOnce() override;
+    void attachButtonInterrupts();
+    void detachButtonInterrupts();
+    void storeClickCount();
 
   private:
-#ifdef BUTTON_PIN
-    OneButton userButton;
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+    static OneButton userButton; // Static - accessed from an interrupt
 #endif
 #ifdef BUTTON_PIN_ALT
     OneButton userButtonAlt;
@@ -33,20 +36,22 @@ class ButtonThread : public concurrency::OSThread
 #ifdef BUTTON_PIN_TOUCH
     OneButton userButtonTouch;
 #endif
-#if defined(ARCH_PORTDUINO)
-    OneButton userButton;
-#endif
 
     // set during IRQ
     static volatile ButtonEventType btnEvent;
 
+    // Store click count during callback, for later use
+    volatile int multipressClickCount = 0;
+
     static void wakeOnIrq(int irq, int mode);
 
     // IRQ callbacks
-    static void touchPressed() { btnEvent = BUTTON_EVENT_TOUCH_PRESSED; }
     static void userButtonPressed() { btnEvent = BUTTON_EVENT_PRESSED; }
     static void userButtonDoublePressed() { btnEvent = BUTTON_EVENT_DOUBLE_PRESSED; }
-    static void userButtonMultiPressed() { btnEvent = BUTTON_EVENT_MULTI_PRESSED; }
+    static void userButtonMultiPressed(void *callerThread); // Retrieve click count from non-static Onebutton while still valid
     static void userButtonPressedLongStart();
     static void userButtonPressedLongStop();
+    static void touchPressedLongStart() { btnEvent = BUTTON_EVENT_TOUCH_LONG_PRESSED; }
 };
+
+extern ButtonThread *buttonThread;

src/Power.cpp

@@ -500,12 +500,7 @@ void Power::shutdown()
 {
     LOG_INFO("Shutting down\n");
 
-#ifdef HAS_PMU
-    if (pmu_found == true) {
-        PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
-        PMU->shutdown();
-    }
-#elif defined(ARCH_NRF52) || defined(ARCH_ESP32)
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
 #ifdef PIN_LED1
     ledOff(PIN_LED1);
 #endif

src/PowerFSM.cpp

@@ -17,6 +17,10 @@
 #include "sleep.h"
 #include "target_specific.h"
 
+#ifndef SLEEP_TIME
+#define SLEEP_TIME 30
+#endif
+
 /// Should we behave as if we have AC power now?
 static bool isPowered()
 {
@@ -81,7 +85,7 @@ static void lsIdle()
         // If some other service would stall sleep, don't let sleep happen yet
         if (doPreflightSleep()) {
             // Briefly come out of sleep long enough to blink the led once every few seconds
-            uint32_t sleepTime = 30;
+            uint32_t sleepTime = SLEEP_TIME;
 
             setLed(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
@@ -103,9 +107,7 @@ static void lsIdle()
                 break;
 
             default:
-                // We woke for some other reason (button press, device interrupt)
-                // uint64_t status = esp_sleep_get_ext1_wakeup_status();
-                LOG_INFO("wakeCause2 %d\n", wakeCause2);
+                // We woke for some other reason (button press, device IRQ interrupt)
 
 #ifdef BUTTON_PIN
                 bool pressed = !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
@@ -183,10 +185,12 @@ static void powerEnter()
         screen->setOn(true);
         setBluetoothEnable(true);
         // within enter() the function getState() returns the state we came from
-        if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
+
+        // Mothballed: print change of power-state to device screen
+        /* if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
             strcmp(powerFSM.getState()->name, "DARK") != 0) {
             screen->print("Powered...\n");
-        }
+        }*/
     }
 }
 
@@ -203,8 +207,10 @@ static void powerExit()
 {
     screen->setOn(true);
     setBluetoothEnable(true);
-    if (!isPowered())
-        screen->print("Unpowered...\n");
+
+    // Mothballed: print change of power-state to device screen
+    /*if (!isPowered())
+        screen->print("Unpowered...\n");*/
 }
 
 static void onEnter()
@@ -348,9 +354,6 @@ void PowerFSM_setup()
     powerFSM.add_timed_transition(&statePOWER, &stateDARK,
                                   Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
                                   "Screen-on timeout");
-    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
-                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
 
 // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 #ifdef ARCH_ESP32
@@ -361,11 +364,24 @@ void PowerFSM_setup()
         powerFSM.add_timed_transition(&stateNB, &stateLS,
                                       Default::getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
                                       "Min wake timeout");
+
+        // If ESP32 and using power-saving, timer mover from DARK to light-sleep
+        // Also serves purpose of the old DARK to DARK transition(?) See https://github.com/meshtastic/firmware/issues/3517
         powerFSM.add_timed_transition(
             &stateDARK, &stateLS,
             Default::getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL,
             "Bluetooth timeout");
+    } else {
+        // If ESP32, but not using power-saving, check periodically if config has drifted out of stateDark
+        powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
     }
+#else
+    // If not ESP32, light-sleep not used. Check periodically if config has drifted out of stateDark
+    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
 #endif
 
     powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state

src/RedirectablePrint.cpp

@@ -99,7 +99,7 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 
         // If we are the first message on a report, include the header
         if (!isContinuationMessage) {
-            uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
+            uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // display local time on logfile
             if (rtc_sec > 0) {
                 long hms = rtc_sec % SEC_PER_DAY;
                 // hms += tz.tz_dsttime * SEC_PER_HOUR;
@@ -182,11 +182,11 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16_t len)
 {
     const char alphabet[17] = "0123456789abcdef";
-    log(logLevel, "   +------------------------------------------------+ +----------------+\n");
-    log(logLevel, "   |.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 .a .b .c .d .e .f | |      ASCII     |\n");
+    log(logLevel, "    +------------------------------------------------+ +----------------+\n");
+    log(logLevel, "    |.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 .a .b .c .d .e .f | |      ASCII     |\n");
     for (uint16_t i = 0; i < len; i += 16) {
         if (i % 128 == 0)
-            log(logLevel, "   +------------------------------------------------+ +----------------+\n");
+            log(logLevel, "    +------------------------------------------------+ +----------------+\n");
         char s[] = "|                                                | |                |\n";
         uint8_t ix = 1, iy = 52;
         for (uint8_t j = 0; j < 16; j++) {
@@ -208,7 +208,7 @@ void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16
         log(logLevel, ".");
         log(logLevel, s);
     }
-    log(logLevel, "   +------------------------------------------------+ +----------------+\n");
+    log(logLevel, "    +------------------------------------------------+ +----------------+\n");
 }
 
 std::string RedirectablePrint::mt_sprintf(const std::string fmt_str, ...)

src/configuration.h

@@ -74,6 +74,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RTC_DATA_ATTR
 #endif
 
+// -----------------------------------------------------------------------------
+// Regulatory overrides for producing regional builds
+// -----------------------------------------------------------------------------
+
+// Define if region should override user saved region
+// #define LORA_REGIONCODE meshtastic_Config_LoRaConfig_RegionCode_SG_923
+
 // -----------------------------------------------------------------------------
 // Feature toggles
 // -----------------------------------------------------------------------------
@@ -128,6 +135,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MPU6050_ADDR 0x68
 #define LIS3DH_ADR 0x18
 #define BMA423_ADDR 0x19
+#define LSM6DS3_ADDR 0x6A
 
 // -----------------------------------------------------------------------------
 // LED
@@ -137,9 +145,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // Security
 // -----------------------------------------------------------------------------
-
 #define ATECC608B_ADDR 0x35
 
+// -----------------------------------------------------------------------------
+// IO Expander
+// -----------------------------------------------------------------------------
+#define TCA9555_ADDR 0x26
+
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------
@@ -280,4 +292,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef MESHTASTIC_EXCLUDE_SCREEN
 #undef HAS_SCREEN
 #define HAS_SCREEN 0
-#endif
+#endif

src/detect/LoRaRadioType.h

@@ -0,0 +1,5 @@
+#pragma once
+
+enum LoRaRadioType { NO_RADIO, STM32WLx_RADIO, SIM_RADIO, RF95_RADIO, SX1262_RADIO, SX1268_RADIO, LLCC68_RADIO, SX1280_RADIO };
+
+extern LoRaRadioType radioType;

src/detect/ScanI2C.cpp

@@ -36,8 +36,8 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423};
-    return firstOfOrNONE(3, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3};
+    return firstOfOrNONE(4, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const

src/detect/ScanI2C.h

@@ -38,9 +38,10 @@ class ScanI2C
         MPU6050,
         LIS3DH,
         BMA423,
-#ifdef HAS_NCP5623
+        BQ24295,
+        LSM6DS3,
+        TCA9555,
         NCP5623,
-#endif
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -271,8 +271,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                 }
                 break;
             case INA3221_ADDR:
-                LOG_INFO("INA3221 sensor found at address 0x%x\n", (uint8_t)addr.address);
-                type = INA3221;
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
+                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
+                if (registerValue == 0x5449) {
+                    LOG_INFO("INA3221 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = INA3221;
+                } else { // Unknown device
+                    LOG_INFO("No INA3221 found at address 0x%x\n", (uint8_t)addr.address);
+                }
                 break;
             case MCP9808_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
@@ -293,12 +299,31 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                 SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found\n")
 
                 SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found\n")
-                SCAN_SIMPLE_CASE(QMI8658_ADDR, QMI8658, "QMI8658 Highrate 6-Axis inertial measurement sensor found\n")
+
+            case QMI8658_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0A), 1); // get ID
+                if (registerValue == 0xC0) {
+                    type = BQ24295;
+                    LOG_INFO("BQ24295 PMU found\n");
+                    break;
+                }
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
+                if (registerValue == 0x6A) {
+                    type = LSM6DS3;
+                    LOG_INFO("LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                } else {
+                    type = QMI8658;
+                    LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found\n");
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found\n")
 
                 SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
                 SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
                 SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
+                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found\n");
 
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);

src/gps/GPS.cpp

@@ -7,6 +7,8 @@
 
 #include "main.h" // pmu_found
 #include "sleep.h"
+
+#include "cas.h"
 #include "ubx.h"
 
 #ifdef ARCH_PORTDUINO
@@ -51,6 +53,28 @@ void GPS::UBXChecksum(uint8_t *message, size_t length)
     message[length - 1] = CK_B;
 }
 
+// Calculate the checksum for a CAS packet
+void GPS::CASChecksum(uint8_t *message, size_t length)
+{
+    uint32_t cksum = ((uint32_t)message[5] << 24); // Message ID
+    cksum += ((uint32_t)message[4]) << 16;         // Class
+    cksum += message[2];                           // Payload Len
+
+    // Iterate over the payload as a series of uint32_t's and
+    // accumulate the cksum
+    uint32_t *payload = (uint32_t *)(message + 6);
+    for (size_t i = 0; i < (length - 10) / 4; i++) {
+        uint32_t p = payload[i];
+        cksum += p;
+    }
+
+    // Place the checksum values in the message
+    message[length - 4] = (cksum & 0xFF);
+    message[length - 3] = (cksum & (0xFF << 8)) >> 8;
+    message[length - 2] = (cksum & (0xFF << 16)) >> 16;
+    message[length - 1] = (cksum & (0xFF << 24)) >> 24;
+}
+
 // Function to create a ublox packet for editing in memory
 uint8_t GPS::makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg)
 {
@@ -72,6 +96,41 @@ uint8_t GPS::makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_siz
     return (payload_size + 8);
 }
 
+// Function to create a CAS packet for editing in memory
+uint8_t GPS::makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg)
+{
+    // General CAS structure
+    //        | H1   | H2   | payload_len | cls  | msg  | Payload       ...   | Checksum                  |
+    // Size:  | 1    | 1    | 2           | 1    | 1    | payload_len         | 4                         |
+    // Pos:   | 0    | 1    | 2    | 3    | 4    | 5    | 6    | 7      ...   | 6 + payload_len ...       |
+    //        |------|------|-------------|------|------|------|--------------|---------------------------|
+    //        | 0xBA | 0xCE | 0xXX | 0xXX | 0xXX | 0xXX | 0xXX | 0xXX   ...   | 0xXX | 0xXX | 0xXX | 0xXX |
+
+    // Construct the CAS packet
+    UBXscratch[0] = 0xBA;         // header 1 (0xBA)
+    UBXscratch[1] = 0xCE;         // header 2 (0xCE)
+    UBXscratch[2] = payload_size; // length 1
+    UBXscratch[3] = 0;            // length 2
+    UBXscratch[4] = class_id;     // class
+    UBXscratch[5] = msg_id;       // id
+
+    UBXscratch[6 + payload_size] = 0x00; // Checksum
+    UBXscratch[7 + payload_size] = 0x00;
+    UBXscratch[8 + payload_size] = 0x00;
+    UBXscratch[9 + payload_size] = 0x00;
+
+    for (int i = 0; i < payload_size; i++) {
+        UBXscratch[6 + i] = pgm_read_byte(&msg[i]);
+    }
+    CASChecksum(UBXscratch, (payload_size + 10));
+
+#if defined(GPS_DEBUG) && defined(DEBUG_PORT)
+    LOG_DEBUG("Constructed CAS packet: \n");
+    DEBUG_PORT.hexDump(MESHTASTIC_LOG_LEVEL_DEBUG, UBXscratch, payload_size + 10);
+#endif
+    return (payload_size + 10);
+}
+
 GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
 {
     uint8_t buffer[768] = {0};
@@ -81,6 +140,7 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
     while (millis() < startTimeout) {
         if (_serial_gps->available()) {
             b = _serial_gps->read();
+
 #ifdef GPS_DEBUG
             LOG_DEBUG("%02X", (char *)buffer);
 #endif
@@ -104,6 +164,67 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
     return GNSS_RESPONSE_NONE;
 }
 
+GPS_RESPONSE GPS::getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis)
+{
+    uint32_t startTime = millis();
+    uint8_t buffer[CAS_ACK_NACK_MSG_SIZE] = {0};
+    uint8_t bufferPos = 0;
+
+    // CAS-ACK-(N)ACK structure
+    //         | H1   | H2   | Payload Len | cls  | msg  | Payload                   | Checksum (4)              |
+    //         |      |      |             |      |      | Cls  | Msg  | Reserved    |                           |
+    //         |------|------|-------------|------|------|------|------|-------------|---------------------------|
+    // ACK-NACK| 0xBA | 0xCE | 0x04 | 0x00 | 0x05 | 0x00 | 0xXX | 0xXX | 0x00 | 0x00 | 0xXX | 0xXX | 0xXX | 0xXX |
+    // ACK-ACK | 0xBA | 0xCE | 0x04 | 0x00 | 0x05 | 0x01 | 0xXX | 0xXX | 0x00 | 0x00 | 0xXX | 0xXX | 0xXX | 0xXX |
+
+    while (millis() - startTime < waitMillis) {
+        if (_serial_gps->available()) {
+            buffer[bufferPos++] = _serial_gps->read();
+
+            // keep looking at the first two bytes of buffer until
+            // we have found the CAS frame header (0xBA, 0xCE), if not
+            // keep reading bytes until we find a frame header or we run
+            // out of time.
+            if ((bufferPos == 2) && !(buffer[0] == 0xBA && buffer[1] == 0xCE)) {
+                buffer[0] = buffer[1];
+                buffer[1] = 0;
+                bufferPos = 1;
+            }
+        }
+
+        // we have read all the bytes required for the Ack/Nack (14-bytes)
+        // and we must have found a frame to get this far
+        if (bufferPos == sizeof(buffer) - 1) {
+            uint8_t msg_cls = buffer[4];     // message class should be 0x05
+            uint8_t msg_msg_id = buffer[5];  // message id should be 0x00 or 0x01
+            uint8_t payload_cls = buffer[6]; // payload class id
+            uint8_t payload_msg = buffer[7]; // payload message id
+
+            // Check for an ACK-ACK for the specified class and message id
+            if ((msg_cls == 0x05) && (msg_msg_id == 0x01) && payload_cls == class_id && payload_msg == msg_id) {
+#ifdef GPS_DEBUG
+                LOG_INFO("Got ACK for class %02X message %02X in %d millis.\n", class_id, msg_id, millis() - startTime);
+#endif
+                return GNSS_RESPONSE_OK;
+            }
+
+            // Check for an ACK-NACK for the specified class and message id
+            if ((msg_cls == 0x05) && (msg_msg_id == 0x00) && payload_cls == class_id && payload_msg == msg_id) {
+#ifdef GPS_DEBUG
+                LOG_WARN("Got NACK for class %02X message %02X in %d millis.\n", class_id, msg_id, millis() - startTime);
+#endif
+                return GNSS_RESPONSE_NAK;
+            }
+
+            // This isn't the frame we are looking for, clear the buffer
+            // and try again until we run out of time.
+            memset(buffer, 0x0, sizeof(buffer));
+            bufferPos = 0;
+        }
+    }
+    return GNSS_RESPONSE_NONE;
+}
+
 GPS_RESPONSE GPS::getACK(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis)
 {
     uint8_t b;
@@ -313,6 +434,33 @@ bool GPS::setup()
             // Switch to Fitness Mode, for running and walking purpose with low speed (<5 m/s)
             _serial_gps->write("$PMTK886,1*29\r\n");
             delay(250);
+        } else if (gnssModel == GNSS_MODEL_ATGM336H) {
+            // Set the intial configuration of the device - these _should_ work for most AT6558 devices
+            msglen = makeCASPacket(0x06, 0x07, sizeof(_message_CAS_CFG_NAVX_CONF), _message_CAS_CFG_NAVX_CONF);
+            _serial_gps->write(UBXscratch, msglen);
+            if (getACKCas(0x06, 0x07, 250) != GNSS_RESPONSE_OK) {
+                LOG_WARN("ATGM336H - Could not set Configuration");
+            }
+
+            // Set the update frequence to 1Hz
+            msglen = makeCASPacket(0x06, 0x04, sizeof(_message_CAS_CFG_RATE_1HZ), _message_CAS_CFG_RATE_1HZ);
+            _serial_gps->write(UBXscratch, msglen);
+            if (getACKCas(0x06, 0x04, 250) != GNSS_RESPONSE_OK) {
+                LOG_WARN("ATGM336H - Could not set Update Frequency");
+            }
+
+            // Set the NEMA output messages
+            // Ask for only RMC and GGA
+            uint8_t fields[] = {CAS_NEMA_RMC, CAS_NEMA_GGA};
+            for (uint i = 0; i < sizeof(fields); i++) {
+                // Construct a CAS-CFG-MSG packet
+                uint8_t cas_cfg_msg_packet[] = {0x4e, fields[i], 0x01, 0x00};
+                msglen = makeCASPacket(0x06, 0x01, sizeof(cas_cfg_msg_packet), cas_cfg_msg_packet);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACKCas(0x06, 0x01, 250) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("ATGM336H - Could not enable NMEA MSG: %d\n", fields[i]);
+                }
+            }
         } else if (gnssModel == GNSS_MODEL_UC6580) {
             // The Unicore UC6580 can use a lot of sat systems, enable it to
             // use GPS L1 & L5 + BDS B1I & B2a + GLONASS L1 + GALILEO E1 & E5a + SBAS
@@ -948,10 +1096,18 @@ GnssModel_t GPS::probe(int serialSpeed)
     uint8_t buffer[768] = {0};
     delay(100);
 
-    // Close all NMEA sentences , Only valid for L76K MTK platform
+    // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
     _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
     delay(20);
 
+    // Get version information
+    clearBuffer();
+    _serial_gps->write("$PCAS06,1*1A\r\n");
+    if (getACK("$GPTXT,01,01,02,HW=ATGM336H", 500) == GNSS_RESPONSE_OK) {
+        LOG_INFO("ATGM336H GNSS init succeeded, using ATGM336H Module\n");
+        return GNSS_MODEL_ATGM336H;
+    }
+
     // Get version information
     clearBuffer();
     _serial_gps->write("$PCAS06,0*1B\r\n");
@@ -1216,6 +1372,11 @@ bool GPS::factoryReset()
         LOG_INFO("GNSS Factory Reset via PCAS10,3\n");
         _serial_gps->write("$PCAS10,3*1F\r\n");
         delay(100);
+    } else if (gnssModel == GNSS_MODEL_ATGM336H) {
+        LOG_INFO("Factory Reset via CAS-CFG-RST\n");
+        uint8_t msglen = makeCASPacket(0x06, 0x02, sizeof(_message_CAS_CFG_RST_FACTORY), _message_CAS_CFG_RST_FACTORY);
+        _serial_gps->write(UBXscratch, msglen);
+        delay(100);
     } else {
         // fire this for good measure, if we have an L76B - won't harm other devices.
         _serial_gps->write("$PMTK104*37\r\n");
@@ -1379,7 +1540,7 @@ bool GPS::lookForLocation()
     t.tm_mon = reader.date.month() - 1;
     t.tm_year = reader.date.year() - 1900;
     t.tm_isdst = false;
-    p.timestamp = mktime(&t);
+    p.timestamp = gm_mktime(&t);
 
     // Nice to have, if available
     if (reader.satellites.isUpdated()) {
@@ -1423,7 +1584,7 @@ bool GPS::hasFlow()
 
 bool GPS::whileIdle()
 {
-    int charsInBuf = 0;
+    uint charsInBuf = 0;
     bool isValid = false;
     if (!isAwake) {
         clearBuffer();

src/gps/GPS.h

@@ -22,7 +22,14 @@ struct uBloxGnssModelInfo {
     char extension[10][30];
 };
 
-typedef enum { GNSS_MODEL_MTK, GNSS_MODEL_UBLOX, GNSS_MODEL_UC6580, GNSS_MODEL_UNKNOWN, GNSS_MODEL_MTK_L76B } GnssModel_t;
+typedef enum {
+    GNSS_MODEL_ATGM336H,
+    GNSS_MODEL_MTK,
+    GNSS_MODEL_UBLOX,
+    GNSS_MODEL_UC6580,
+    GNSS_MODEL_UNKNOWN,
+    GNSS_MODEL_MTK_L76B
+} GnssModel_t;
 
 typedef enum {
     GNSS_RESPONSE_NONE,
@@ -133,6 +140,11 @@ class GPS : private concurrency::OSThread
     static const uint8_t _message_VALSET_DISABLE_SBAS_RAM[];
     static const uint8_t _message_VALSET_DISABLE_SBAS_BBR[];
 
+    // CASIC commands for ATGM336H
+    static const uint8_t _message_CAS_CFG_RST_FACTORY[];
+    static const uint8_t _message_CAS_CFG_NAVX_CONF[];
+    static const uint8_t _message_CAS_CFG_RATE_1HZ[];
+
     meshtastic_Position p = meshtastic_Position_init_default;
 
     GPS() : concurrency::OSThread("GPS") {}
@@ -174,6 +186,7 @@ class GPS : private concurrency::OSThread
 
     // Create a ublox packet for editing in memory
     uint8_t makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
+    uint8_t makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
 
     // scratch space for creating ublox packets
     uint8_t UBXscratch[250] = {0};
@@ -184,6 +197,8 @@ class GPS : private concurrency::OSThread
     GPS_RESPONSE getACK(uint8_t c, uint8_t i, uint32_t waitMillis);
     GPS_RESPONSE getACK(const char *message, uint32_t waitMillis);
 
+    GPS_RESPONSE getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis);
+
     /**
      * Switch the GPS into a mode where we are actively looking for a lock, or alternatively switch GPS into a low power mode
      *
@@ -243,6 +258,7 @@ class GPS : private concurrency::OSThread
 
     // Calculate checksum
     void UBXChecksum(uint8_t *message, size_t length);
+    void CASChecksum(uint8_t *message, size_t length);
 
     /** Get how long we should stay looking for each aquisition
      */

src/gps/NMEAWPL.cpp

@@ -75,10 +75,10 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const
 uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos)
 {
     GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
-    tm *t = localtime((time_t *)&pos.timestamp);
+    tm *t = gmtime((time_t *)&pos.timestamp);
     if (getRTCQuality() > 0) { // use the device clock if we got time from somewhere. If not, use the GPS timestamp.
         uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
-        t = localtime((time_t *)&rtc_sec);
+        t = gmtime((time_t *)&rtc_sec);
     }
 
     uint32_t len = snprintf(

src/gps/RTC.cpp

@@ -40,7 +40,7 @@ void readFromRTC()
         t.tm_hour = rtc.getHour();
         t.tm_min = rtc.getMinute();
         t.tm_sec = rtc.getSecond();
-        tv.tv_sec = mktime(&t);
+        tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
         LOG_DEBUG("Read RTC time from RV3028 as %ld\n", tv.tv_sec);
         timeStartMsec = now;
@@ -68,7 +68,7 @@ void readFromRTC()
         t.tm_hour = tc.hour;
         t.tm_min = tc.minute;
         t.tm_sec = tc.second;
-        tv.tv_sec = mktime(&t);
+        tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
         LOG_DEBUG("Read RTC time from PCF8563 as %ld\n", tv.tv_sec);
         timeStartMsec = now;
@@ -104,13 +104,15 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
     bool shouldSet;
     if (q > currentQuality) {
         shouldSet = true;
-        LOG_DEBUG("Upgrading time to quality %d\n", q);
-    } else if (q == RTCQualityGPS && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
-        // Every 12 hrs we will slam in a new GPS time, to correct for local RTC clock drift
+        LOG_DEBUG("Upgrading time to quality %s\n", RtcName(q));
+    } else if (q >= RTCQualityNTP && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
+        // Every 12 hrs we will slam in a new GPS or Phone GPS / NTP time, to correct for local RTC clock drift
         shouldSet = true;
         LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", tv->tv_sec);
-    } else
+    } else {
         shouldSet = false;
+        LOG_DEBUG("Current RTC quality: %s. Ignoring time of RTC quality of %s\n", RtcName(currentQuality), RtcName(q));
+    }
 
     if (shouldSet) {
         currentQuality = q;
@@ -128,7 +130,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 #else
             rtc.initI2C();
 #endif
-            tm *t = localtime(&tv->tv_sec);
+            tm *t = gmtime(&tv->tv_sec);
             rtc.setTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
@@ -142,7 +144,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 #else
             rtc.begin();
 #endif
-            tm *t = localtime(&tv->tv_sec);
+            tm *t = gmtime(&tv->tv_sec);
             rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
@@ -162,6 +164,24 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
     }
 }
 
+const char *RtcName(RTCQuality quality)
+{
+    switch (quality) {
+    case RTCQualityNone:
+        return "None";
+    case RTCQualityDevice:
+        return "Device";
+    case RTCQualityFromNet:
+        return "Net";
+    case RTCQualityNTP:
+        return "NTP";
+    case RTCQualityGPS:
+        return "GPS";
+    default:
+        return "Unknown";
+    }
+}
+
 /**
  * Sets the RTC time if the provided time is of higher quality than the current RTC time.
  *
@@ -175,7 +195,9 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, 1970
     (midnight UTC/GMT), not counting leap seconds (in ISO 8601: 1970-01-01T00:00:00Z).
     */
-    time_t res = mktime(&t);
+    // horrible hack to make mktime TZ agnostic - best practise according to
+    // https://www.gnu.org/software/libc/manual/html_node/Broken_002ddown-Time.html
+    time_t res = gm_mktime(&t);
     struct timeval tv;
     tv.tv_sec = res;
     tv.tv_usec = 0; // time.centisecond() * (10 / 1000);
@@ -189,14 +211,33 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     }
 }
 
+/**
+ * Returns the timezone offset in seconds.
+ *
+ * @return The timezone offset in seconds.
+ */
+int32_t getTZOffset()
+{
+    time_t now;
+    struct tm *gmt;
+    now = time(NULL);
+    gmt = gmtime(&now);
+    gmt->tm_isdst = -1;
+    return (int16_t)difftime(now, mktime(gmt));
+}
+
 /**
  * Returns the current time in seconds since the Unix epoch (January 1, 1970).
  *
  * @return The current time in seconds since the Unix epoch.
  */
-uint32_t getTime()
+uint32_t getTime(bool local)
 {
-    return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs;
+    if (local) {
+        return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs + getTZOffset();
+    } else {
+        return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs;
+    }
 }
 
 /**
@@ -205,7 +246,19 @@ uint32_t getTime()
  * @param minQuality The minimum quality of the RTC time required for it to be considered valid.
  * @return The current time from the RTC if it meets the minimum quality requirement, or 0 if the time is not valid.
  */
-uint32_t getValidTime(RTCQuality minQuality)
+uint32_t getValidTime(RTCQuality minQuality, bool local)
 {
-    return (currentQuality >= minQuality) ? getTime() : 0;
+    return (currentQuality >= minQuality) ? getTime(local) : 0;
+}
+
+time_t gm_mktime(struct tm *tm)
+{
+    setenv("TZ", "GMT0", 1);
+    time_t res = mktime(tm);
+    if (*config.device.tzdef) {
+        setenv("TZ", config.device.tzdef, 1);
+    } else {
+        setenv("TZ", "UTC0", 1);
+    }
+    return res;
 }

src/gps/RTC.h

@@ -28,14 +28,19 @@ RTCQuality getRTCQuality();
 bool perhapsSetRTC(RTCQuality q, const struct timeval *tv);
 bool perhapsSetRTC(RTCQuality q, struct tm &t);
 
+/// Return a string name for the quality
+const char *RtcName(RTCQuality quality);
+
 /// Return time since 1970 in secs.  While quality is RTCQualityNone we will be returning time based at zero
-uint32_t getTime();
+uint32_t getTime(bool local = false);
 
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
-uint32_t getValidTime(RTCQuality minQuality);
+uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
 void readFromRTC();
 
+time_t gm_mktime(struct tm *tm);
+
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60

src/gps/cas.h

@@ -0,0 +1,63 @@
+#pragma once
+
+// CASIC binary message definitions
+// Reference: https://www.icofchina.com/d/file/xiazai/2020-09-22/20f1b42b3a11ac52089caf3603b43fb5.pdf
+// ATGM33H-5N: https://www.icofchina.com/pro/mokuai/2016-08-01/4.html
+// (https://www.icofchina.com/d/file/xiazai/2016-12-05/b5c57074f4b1fcc62ba8c7868548d18a.pdf)
+
+// NEMA (Class ID - 0x4e) message IDs
+#define CAS_NEMA_GGA 0x00
+#define CAS_NEMA_GLL 0x01
+#define CAS_NEMA_GSA 0x02
+#define CAS_NEMA_GSV 0x03
+#define CAS_NEMA_RMC 0x04
+#define CAS_NEMA_VTG 0x05
+#define CAS_NEMA_GST 0x07
+#define CAS_NEMA_ZDA 0x08
+#define CAS_NEMA_DHV 0x0D
+
+// Size of a CAS-ACK-(N)ACK message (14 bytes)
+#define CAS_ACK_NACK_MSG_SIZE 0x0E
+
+// CFG-RST (0x06, 0x02)
+// Factory reset
+const uint8_t GPS::_message_CAS_CFG_RST_FACTORY[] = {
+    0xFF, 0x03, // Fields to clear
+    0x01,       // Reset Mode: Controlled Software reset
+    0x03        // Startup Mode: Factory
+};
+
+// CFG_RATE (0x06, 0x01)
+// 1HZ update rate, this should always be the case after
+// factory reset but update it regardless
+const uint8_t GPS::_message_CAS_CFG_RATE_1HZ[] = {
+    0xE8, 0x03, // Update Rate: 0x03E8 = 1000ms
+    0x00, 0x00  // Reserved
+};
+
+// CFG-NAVX (0x06, 0x07)
+// Initial ATGM33H-5N configuration, Updates for Dynamic Mode, Fix Mode, and SV system
+// Qwirk: The ATGM33H-5N-31 should only support GPS+BDS, however it will happily enable
+//  and use GPS+BDS+GLONASS iff the correct CFG_NAVX command is used.
+const uint8_t GPS::_message_CAS_CFG_NAVX_CONF[] = {
+    0x03, 0x01, 0x00, 0x00, // Update Mask: Dynamic Mode, Fix Mode, Nav Settings
+    0x03,                   // Dynamic Mode: Automotive
+    0x03,                   // Fix Mode: Auto 2D/3D
+    0x00,                   // Min SV
+    0x00,                   // Max SVs
+    0x00,                   // Min CNO
+    0x00,                   // Reserved1
+    0x00,                   // Init 3D fix
+    0x00,                   // Min Elevation
+    0x00,                   // Dr Limit
+    0x07,                   // Nav System: 2^0 = GPS, 2^1 = BDS 2^2 = GLONASS: 2^3
+                            // 3=GPS+BDS, 7=GPS+BDS+GLONASS
+    0x00, 0x00,             // Rollover Week
+    0x00, 0x00, 0x00, 0x00, // Fix Altitude
+    0x00, 0x00, 0x00, 0x00, // Fix Height Error
+    0x00, 0x00, 0x00, 0x00, // PDOP Maximum
+    0x00, 0x00, 0x00, 0x00, // TDOP Maximum
+    0x00, 0x00, 0x00, 0x00, // Position Accuracy Max
+    0x00, 0x00, 0x00, 0x00, // Time Accuracy Max
+    0x00, 0x00, 0x00, 0x00  // Static Hold Threshold
+};

src/graphics/EInkDisplay2.cpp

@@ -151,31 +151,12 @@ bool EInkDisplay::connect()
 
 #elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER)
     {
-        // Is this a normal boot, or a wake from deep sleep?
-        esp_sleep_wakeup_cause_t wakeReason = esp_sleep_get_wakeup_cause();
-
-        // If waking from sleep, need to reverse rtc_gpio_isolate(), called in cpuDeepSleep()
-        // Otherwise, SPI won't work
-        if (wakeReason != ESP_SLEEP_WAKEUP_UNDEFINED) {
-            // HSPI + other display pins
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_SCLK);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_DC);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_RES);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_BUSY);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_CS);
-            rtc_gpio_hold_dis((gpio_num_t)PIN_EINK_MOSI);
-        }
-
         // Start HSPI
         hspi = new SPIClass(HSPI);
         hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
 
-        // Enable VExt (ACTIVE LOW)
-        // Unsure if called elsewhere first?
-        delay(100);
-        pinMode(Vext, OUTPUT);
-        digitalWrite(Vext, LOW);
-        delay(100);
+        // VExt already enabled in setup()
+        // RTC GPIO hold disabled in setup()
 
         // Create GxEPD2 objects
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);

src/graphics/EInkDynamicDisplay.cpp

@@ -463,10 +463,33 @@ void EInkDynamicDisplay::onNotify(uint32_t notification)
 }
 
 #ifdef HAS_EINK_ASYNCFULL
-// Run the post-update code if the hardware is ready
+// Public: wait for an refresh already in progress, then run the post-update code. See Screen::setScreensaverFrames()
+void EInkDynamicDisplay::joinAsyncRefresh()
+{
+    // If no async refresh running, nothing to do
+    if (!asyncRefreshRunning)
+        return;
+
+    LOG_DEBUG("Joining an async refresh in progress\n");
+
+    // Continually poll the BUSY pin
+    while (adafruitDisplay->epd2.isBusy())
+        yield();
+
+    // If asyncRefreshRunning flag is still set, but display's BUSY pin reports the refresh is done
+    adafruitDisplay->endAsyncFull(); // Run the end of nextPage() code
+    EInkDisplay::endUpdate();        // Run base-class code to finish off update (NOT our derived class override)
+    asyncRefreshRunning = false;     // Unset the flag
+    LOG_DEBUG("Refresh complete\n");
+
+    // Note: this code only works because of a modification to meshtastic/GxEPD2.
+    // It is only equipped to intercept calls to nextPage()
+}
+
+// Called from NotifiedWorkerThread. Run the post-update code if the hardware is ready
 void EInkDynamicDisplay::pollAsyncRefresh()
 {
-    // We shouldn't be here..
+    // In theory, this condition should never be met
     if (!asyncRefreshRunning)
         return;
 
@@ -511,6 +534,10 @@ void EInkDynamicDisplay::checkBusyAsyncRefresh()
 
         return;
     }
+
+    // Async refresh appears to have stopped, but wasn't caught by onNotify()
+    else
+        pollAsyncRefresh(); // Check (and terminate) the async refresh manually
 }
 
 // Hold control while an async refresh runs

src/graphics/EInkDynamicDisplay.h

@@ -119,20 +119,30 @@ class EInkDynamicDisplay : public EInkDisplay, protected concurrency::NotifiedWo
 
     // Conditional - async full refresh - only with modified meshtastic/GxEPD2
 #if defined(HAS_EINK_ASYNCFULL)
+  public:
+    void joinAsyncRefresh(); // Main thread joins an async refresh already in progress. Blocks, then runs post-update code
+
+  protected:
     void pollAsyncRefresh();          // Run the post-update code if the hardware is ready
     void checkBusyAsyncRefresh();     // Check if display is busy running an async full-refresh (rejecting new frames)
     void awaitRefresh();              // Hold control while an async refresh runs
     void endUpdate() override {}      // Disable base-class behavior of running post-update immediately after forceDisplay()
     bool asyncRefreshRunning = false; // Flag, checked by checkBusyAsyncRefresh()
 #else
+  public:
+    void joinAsyncRefresh() {} // Dummy method
+
+  protected:
     void pollAsyncRefresh() {} // Dummy method. In theory, not reachable
 #endif
 };
 
-// Tidier calls to addFrameFlag() from outside class
+// Hide the ugly casts used in Screen.cpp
 #define EINK_ADD_FRAMEFLAG(display, flag) static_cast<EInkDynamicDisplay *>(display)->addFrameFlag(EInkDynamicDisplay::flag)
+#define EINK_JOIN_ASYNCREFRESH(display) static_cast<EInkDynamicDisplay *>(display)->joinAsyncRefresh()
 
 #else // !USE_EINK_DYNAMICDISPLAY
 // Dummy-macro, removes the need for include guards
 #define EINK_ADD_FRAMEFLAG(display, flag)
+#define EINK_JOIN_ASYNCREFRESH(display)
 #endif

src/graphics/NeoPixel.h

@@ -0,0 +1,4 @@
+#ifdef HAS_NEOPIXEL
+#include <Adafruit_NeoPixel.h>
+extern Adafruit_NeoPixel pixels;
+#endif

src/graphics/Screen.cpp

@@ -528,7 +528,7 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const NodeStat
 {
     char usersString[20];
     snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
     display->drawFastImage(x, y + 3, 8, 8, imgUser);
 #else
@@ -955,7 +955,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014)
+#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -1101,7 +1101,7 @@ void Screen::setup()
     // Standard behaviour is to FLIP the screen (needed on T-Beam). If this config item is set, unflip it, and thereby logically
     // flip it. If you have a headache now, you're welcome.
     if (!config.display.flip_screen) {
-#if defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014)
+#if defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #else
         dispdev->flipScreenVertically();
@@ -1153,10 +1153,33 @@ void Screen::setup()
     MeshModule::observeUIEvents(&uiFrameEventObserver);
 }
 
-void Screen::forceDisplay()
+void Screen::forceDisplay(bool forceUiUpdate)
 {
     // Nasty hack to force epaper updates for 'key' frames.  FIXME, cleanup.
 #ifdef USE_EINK
+    // If requested, make sure queued commands are run, and UI has rendered a new frame
+    if (forceUiUpdate) {
+        // No delay between UI frame rendering
+        setFastFramerate();
+
+        // Make sure all CMDs have run first
+        while (!cmdQueue.isEmpty())
+            runOnce();
+
+        // Ensure at least one frame has drawn
+        uint64_t startUpdate;
+        do {
+            startUpdate = millis(); // Handle impossibly unlikely corner case of a millis() overflow..
+            delay(10);
+            ui->update();
+        } while (ui->getUiState()->lastUpdate < startUpdate);
+
+        // Return to normal frame rate
+        targetFramerate = IDLE_FRAMERATE;
+        ui->setTargetFPS(targetFramerate);
+    }
+
+    // Tell EInk class to update the display
     static_cast<EInkDisplay *>(dispdev)->forceDisplay();
 #endif
 }
@@ -1349,6 +1372,12 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
     static FrameCallback screensaverFrame;
     static OverlayCallback screensaverOverlay;
 
+#if defined(HAS_EINK_ASYNCFULL) && defined(USE_EINK_DYNAMICDISPLAY)
+    // Join (await) a currently running async refresh, then run the post-update code.
+    // Avoid skipping of screensaver frame. Would otherwise be handled by NotifiedWorkerThread.
+    EINK_JOIN_ASYNCREFRESH(dispdev);
+#endif
+
     // If: one-off screensaver frame passed as argument. Handles doDeepSleep()
     if (einkScreensaver != NULL) {
         screensaverFrame = einkScreensaver;
@@ -1370,10 +1399,9 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
         ui->update();
     } while (ui->getUiState()->lastUpdate < startUpdate);
 
-#ifndef USE_EINK_DYNAMICDISPLAY
-    // Retrofit to EInkDisplay class
-    delay(10);
-    screen->forceDisplay();
+    // Old EInkDisplay class
+#if !defined(USE_EINK_DYNAMICDISPLAY)
+    static_cast<EInkDisplay *>(dispdev)->forceDisplay(0); // Screen::forceDisplay(), but override rate-limit
 #endif
 
     // Prepare now for next frame, shown when display wakes
@@ -1490,8 +1518,11 @@ void Screen::handleShutdownScreen()
 {
     LOG_DEBUG("showing shutdown screen\n");
     showingNormalScreen = false;
-    EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // E-Ink: Use fast-refresh for next frame, no skip please
+#ifdef USE_EINK
+    EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Use fast-refresh for next frame, no skip please
     EINK_ADD_FRAMEFLAG(dispdev, BLOCKING);    // Edge case: if this frame is promoted to COSMETIC, wait for update
+    handleSetOn(true);                        // Ensure power-on to receive deep-sleep screensaver (PowerFSM should handle?)
+#endif
 
     auto frame = [](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
         drawFrameText(display, state, x, y, "Shutting down...");
@@ -1499,14 +1530,17 @@ void Screen::handleShutdownScreen()
     static FrameCallback frames[] = {frame};
 
     setFrameImmediateDraw(frames);
-    forceDisplay();
 }
 
 void Screen::handleRebootScreen()
 {
     LOG_DEBUG("showing reboot screen\n");
     showingNormalScreen = false;
-    EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // E-Ink: Explicitly use fast-refresh for next frame
+#ifdef USE_EINK
+    EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Use fast-refresh for next frame, no skip please
+    EINK_ADD_FRAMEFLAG(dispdev, BLOCKING);    // Edge case: if this frame is promoted to COSMETIC, wait for update
+    handleSetOn(true);                        // Power-on to show rebooting screen (PowerFSM should handle?)
+#endif
 
     auto frame = [](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
         drawFrameText(display, state, x, y, "Rebooting...");
@@ -1675,7 +1709,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #ifdef ARCH_ESP32
         if (millis() - storeForwardModule->lastHeartbeat >
             (storeForwardModule->heartbeatInterval * 1200)) { // no heartbeat, overlap a bit
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                    imgQuestionL1);
@@ -1686,7 +1720,7 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                                    imgQuestion);
 #endif
         } else {
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8,
                                    imgSFL1);
@@ -1700,7 +1734,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #endif
     } else {
         // TODO: Raspberry Pi supports more than just the one screen size
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || ARCH_PORTDUINO) &&              \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS) ||           \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -1861,7 +1896,7 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     // Show uptime as days, hours, minutes OR seconds
     std::string uptime = screen->drawTimeDelta(days, hours, minutes, seconds);
 
-    uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
+    uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
     if (rtc_sec > 0) {
         long hms = rtc_sec % SEC_PER_DAY;
         // hms += tz.tz_dsttime * SEC_PER_HOUR;
@@ -1963,4 +1998,4 @@ int Screen::handleInputEvent(const InputEvent *event)
 } // namespace graphics
 #else
 graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/Screen.h

@@ -20,7 +20,7 @@ class Screen
     void setOn(bool) {}
     void print(const char *) {}
     void doDeepSleep() {}
-    void forceDisplay() {}
+    void forceDisplay(bool forceUiUpdate = false) {}
     void startBluetoothPinScreen(uint32_t pin) {}
     void stopBluetoothPinScreen() {}
     void startRebootScreen() {}
@@ -150,7 +150,7 @@ class Screen : public concurrency::OSThread
             // We handle off commands immediately, because they might be called because the CPU is shutting down
             handleSetOn(false, einkScreensaver);
         else
-            enqueueCmd(ScreenCmd{.cmd = on ? Cmd::SET_ON : Cmd::SET_OFF});
+            enqueueCmd(ScreenCmd{.cmd = Cmd::SET_ON});
     }
 
     /**
@@ -318,7 +318,7 @@ class Screen : public concurrency::OSThread
     int handleInputEvent(const InputEvent *arg);
 
     /// Used to force (super slow) eink displays to draw critical frames
-    void forceDisplay();
+    void forceDisplay(bool forceUiUpdate = false);
 
     /// Draws our SSL cert screen during boot (called from WebServer)
     void setSSLFrames();

src/graphics/ScreenFonts.h

@@ -8,7 +8,7 @@
 #include "graphics/fonts/OLEDDisplayFontsUA.h"
 #endif
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS)) &&                                \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16  // Height: 19

src/graphics/TFTDisplay.cpp

@@ -333,7 +333,7 @@ static LGFX *tft = nullptr;
 #include <TFT_eSPI.h> // Graphics and font library for ILI9341 driver chip
 
 static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
-#elif ARCH_PORTDUINO
+#elif ARCH_PORTDUINO && HAS_SCREEN != 0
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
 
 class LGFX : public lgfx::LGFX_Device
@@ -356,6 +356,7 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance = new lgfx::Panel_ILI9341;
         auto buscfg = _bus_instance.config();
         buscfg.spi_mode = 0;
+        _bus_instance.spi_device(DisplaySPI);
 
         buscfg.pin_dc = settingsMap[displayDC]; // Set SPI DC pin number (-1 = disable)
 
@@ -381,6 +382,8 @@ class LGFX : public lgfx::LGFX_Device
                 _touch_instance = new lgfx::Touch_XPT2046;
             } else if (settingsMap[touchscreenModule] == stmpe610) {
                 _touch_instance = new lgfx::Touch_STMPE610;
+            } else if (settingsMap[touchscreenModule] == ft5x06) {
+                _touch_instance = new lgfx::Touch_FT5x06;
             }
             auto touch_cfg = _touch_instance->config();
 
@@ -392,6 +395,9 @@ class LGFX : public lgfx::LGFX_Device
             touch_cfg.pin_int = settingsMap[touchscreenIRQ];
             touch_cfg.bus_shared = true;
             touch_cfg.offset_rotation = 1;
+            if (settingsMap[touchscreenI2CAddr] != -1) {
+                touch_cfg.i2c_addr = settingsMap[touchscreenI2CAddr];
+            }
 
             _touch_instance->config(touch_cfg);
             _panel_instance->setTouch(_touch_instance);
@@ -402,13 +408,103 @@ class LGFX : public lgfx::LGFX_Device
 };
 
 static LGFX *tft = nullptr;
+
+#elif defined(HX8357_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for HX8357 driver chip
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_HX8357D _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+#if defined(USE_XPT2046)
+    lgfx::Touch_XPT2046 _touch_instance;
 #endif
 
-#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) || ARCH_PORTDUINO
+  public:
+    LGFX(void)
+    {
+        // Panel_HX8357D
+        {
+            // configure SPI
+            auto cfg = _bus_instance.config();
+
+            cfg.spi_host = HX8357_SPI_HOST;
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;              // Set to true if reception is done on the MOSI pin
+            cfg.use_lock = true;                // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO;  // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                                // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = HX8357_SCK;          // Set SPI SCLK pin number
+            cfg.pin_mosi = HX8357_MOSI;         // Set SPI MOSI pin number
+            cfg.pin_miso = HX8357_MISO;         // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = HX8357_RS;             // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+        {
+            // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = HX8357_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = HX8357_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = HX8357_BUSY; // Pin number where BUSY is connected (-1 = disable)
+
+            cfg.panel_width = TFT_WIDTH;               // actual displayable width
+            cfg.panel_height = TFT_HEIGHT;             // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;               // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;               // Panel offset amount in Y direction
+            cfg.offset_rotation = TFT_OFFSET_ROTATION; // Rotation direction value offset 0~7 (4~7 is upside down)
+            cfg.dummy_read_pixel = 8;                  // Number of bits for dummy read before pixel readout
+            cfg.dummy_read_bits = 1;                   // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;                       // Set to true if data can be read
+            cfg.invert = TFT_INVERT;                   // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;                     // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit = false;
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            _panel_instance.config(cfg);
+        }
+#if defined(USE_XPT2046)
+        {
+            // Configure settings for touch control.
+            auto touch_cfg = _touch_instance.config();
+
+            touch_cfg.pin_cs = TOUCH_CS;
+            touch_cfg.x_min = 0;
+            touch_cfg.x_max = TFT_HEIGHT - 1;
+            touch_cfg.y_min = 0;
+            touch_cfg.y_max = TFT_WIDTH - 1;
+            touch_cfg.pin_int = -1;
+            touch_cfg.bus_shared = true;
+            touch_cfg.offset_rotation = 1;
+
+            _touch_instance.config(touch_cfg);
+            _panel_instance.setTouch(&_touch_instance);
+        }
+#endif
+        setPanel(&_panel_instance);
+    }
+};
+
+static LGFX *tft = nullptr;
+
+#endif
+
+#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) || defined(HX8357_CS) ||            \
+    (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
 
+#ifdef UNPHONE
+#include "unPhone.h"
+extern unPhone unphone;
+#endif
+
 TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
     LOG_DEBUG("TFTDisplay!\n");
@@ -474,8 +570,10 @@ void TFTDisplay::sendCommand(uint8_t com)
 #elif defined(ST7735_BL_V05)
         pinMode(ST7735_BL_V05, OUTPUT);
         digitalWrite(ST7735_BL_V05, TFT_BACKLIGHT_ON);
-#endif
-#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+        tft->wakeup();
+        tft->powerSaveOff();
+#elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
         digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
 #endif
 
@@ -486,7 +584,9 @@ void TFTDisplay::sendCommand(uint8_t com)
 #ifdef VTFT_CTRL
         digitalWrite(VTFT_CTRL, LOW);
 #endif
-
+#ifdef UNPHONE
+        unphone.backlight(true); // using unPhone library
+#endif
 #ifdef RAK14014
 #elif !defined(M5STACK)
         tft->setBrightness(172);
@@ -503,16 +603,22 @@ void TFTDisplay::sendCommand(uint8_t com)
 #elif defined(ST7735_BL_V05)
         pinMode(ST7735_BL_V05, OUTPUT);
         digitalWrite(ST7735_BL_V05, !TFT_BACKLIGHT_ON);
-#endif
-#if defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+        tft->sleep();
+        tft->powerSaveOn();
+#elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
         digitalWrite(TFT_BL, !TFT_BACKLIGHT_ON);
 #endif
+
 #ifdef VTFT_CTRL_V03
         digitalWrite(VTFT_CTRL_V03, HIGH);
 #endif
 #ifdef VTFT_CTRL
         digitalWrite(VTFT_CTRL, HIGH);
 #endif
+#ifdef UNPHONE
+        unphone.backlight(false); // using unPhone library
+#endif
 #ifdef RAK14014
 #elif !defined(M5STACK)
         tft->setBrightness(0);
@@ -584,6 +690,10 @@ bool TFTDisplay::connect()
     pinMode(ST7735_BL_V05, OUTPUT);
     digitalWrite(ST7735_BL_V05, TFT_BACKLIGHT_ON);
 #endif
+#ifdef UNPHONE
+    unphone.backlight(true); // using unPhone library
+    LOG_INFO("Power to TFT Backlight\n");
+#endif
 
     tft->init();
 

src/graphics/images.h

@@ -14,7 +14,8 @@ const uint8_t imgUser[] PROGMEM = {0x3C, 0x42, 0x99, 0xA5, 0xA5, 0x99, 0x42, 0x3
 const uint8_t imgPositionEmpty[] PROGMEM = {0x20, 0x30, 0x28, 0x24, 0x42, 0xFF};
 const uint8_t imgPositionSolid[] PROGMEM = {0x20, 0x30, 0x38, 0x3C, 0x7E, 0xFF};
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || ARCH_PORTDUINO) &&              \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS) ||           \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};
@@ -30,4 +31,4 @@ const uint8_t imgQuestion[] PROGMEM = {0xbf, 0x41, 0xc0, 0x8b, 0xdb, 0x70, 0xa1,
 const uint8_t imgSF[] PROGMEM = {0xd2, 0xb7, 0xad, 0xbb, 0x92, 0x01, 0xfd, 0xfd, 0x15, 0x85, 0xf5};
 #endif
 
-#include "img/icon.xbm"
+#include "img/icon.xbm"

src/input/TouchScreenImpl1.cpp

@@ -4,7 +4,7 @@
 #include "configuration.h"
 #include "modules/ExternalNotificationModule.h"
 
-#ifdef ARCH_PORTDUINO
+#if ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
 #endif
 

src/input/UpDownInterruptBase.cpp

@@ -1,7 +1,7 @@
 #include "UpDownInterruptBase.h"
 #include "configuration.h"
 
-UpDownInterruptBase::UpDownInterruptBase(const char *name)
+UpDownInterruptBase::UpDownInterruptBase(const char *name) : concurrency::OSThread(name)
 {
     this->_originName = name;
 }
@@ -24,31 +24,48 @@ void UpDownInterruptBase::init(uint8_t pinDown, uint8_t pinUp, uint8_t pinPress,
     attachInterrupt(this->_pinUp, onIntUp, RISING);
 
     LOG_DEBUG("Up/down/press GPIO initialized (%d, %d, %d)\n", this->_pinUp, this->_pinDown, pinPress);
+
+    this->setInterval(100);
+}
+
+int32_t UpDownInterruptBase::runOnce()
+{
+    InputEvent e;
+    e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+
+    if (this->action == UPDOWN_ACTION_PRESSED) {
+        LOG_DEBUG("GPIO event Press\n");
+        e.inputEvent = this->_eventPressed;
+    } else if (this->action == UPDOWN_ACTION_UP) {
+        LOG_DEBUG("GPIO event Up\n");
+        e.inputEvent = this->_eventUp;
+    } else if (this->action == UPDOWN_ACTION_DOWN) {
+        LOG_DEBUG("GPIO event Down\n");
+        e.inputEvent = this->_eventDown;
+    }
+
+    if (e.inputEvent != meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE) {
+        e.source = this->_originName;
+        e.kbchar = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+        this->notifyObservers(&e);
+    }
+
+    this->action = UPDOWN_ACTION_NONE;
+
+    return 100;
 }
 
 void UpDownInterruptBase::intPressHandler()
 {
-    InputEvent e;
-    e.source = this->_originName;
-    LOG_DEBUG("GPIO event Press\n");
-    e.inputEvent = this->_eventPressed;
-    this->notifyObservers(&e);
+    this->action = UPDOWN_ACTION_PRESSED;
 }
 
 void UpDownInterruptBase::intDownHandler()
 {
-    InputEvent e;
-    e.source = this->_originName;
-    LOG_DEBUG("GPIO event Down\n");
-    e.inputEvent = this->_eventDown;
-    this->notifyObservers(&e);
+    this->action = UPDOWN_ACTION_DOWN;
 }
 
 void UpDownInterruptBase::intUpHandler()
 {
-    InputEvent e;
-    e.source = this->_originName;
-    LOG_DEBUG("GPIO event Up\n");
-    e.inputEvent = this->_eventUp;
-    this->notifyObservers(&e);
+    this->action = UPDOWN_ACTION_UP;
 }

src/input/UpDownInterruptBase.h

@@ -3,7 +3,7 @@
 #include "InputBroker.h"
 #include "mesh/NodeDB.h"
 
-class UpDownInterruptBase : public Observable<const InputEvent *>
+class UpDownInterruptBase : public Observable<const InputEvent *>, public concurrency::OSThread
 {
   public:
     explicit UpDownInterruptBase(const char *name);
@@ -13,6 +13,13 @@ class UpDownInterruptBase : public Observable<const InputEvent *>
     void intDownHandler();
     void intUpHandler();
 
+    int32_t runOnce() override;
+
+  protected:
+    enum UpDownInterruptBaseActionType { UPDOWN_ACTION_NONE, UPDOWN_ACTION_PRESSED, UPDOWN_ACTION_UP, UPDOWN_ACTION_DOWN };
+
+    volatile UpDownInterruptBaseActionType action = UPDOWN_ACTION_NONE;
+
   private:
     uint8_t _pinDown = 0;
     uint8_t _pinUp = 0;

src/input/kbI2cBase.cpp

@@ -217,7 +217,11 @@ int32_t KbI2cBase::runOnce()
                 e.kbchar = 0xb7;
                 break;
             case 0x90: // fn+r
+            case 0x91: // fn+t
             case 0x9b: // fn+s
+            case 0xac: // fn+m
+            case 0x9e: // fn+g
+            case 0xaf: // fn+space
                 // just pass those unmodified
                 e.inputEvent = ANYKEY;
                 e.kbchar = c;

src/main.cpp

@@ -69,6 +69,7 @@ NRF52Bluetooth *nrf52Bluetooth;
 #include "SX1262Interface.h"
 #include "SX1268Interface.h"
 #include "SX1280Interface.h"
+#include "detect/LoRaRadioType.h"
 
 #ifdef ARCH_STM32WL
 #include "STM32WLE5JCInterface.h"
@@ -142,6 +143,9 @@ ATECCX08A atecc;
 Adafruit_DRV2605 drv;
 #endif
 
+// Global LoRa radio type
+LoRaRadioType radioType = NO_RADIO;
+
 bool isVibrating = false;
 
 bool eink_found = true;
@@ -175,6 +179,11 @@ const char *getDeviceName()
 
 static int32_t ledBlinker()
 {
+    // Still set up the blinking (heartbeat) interval but skip code path below, so LED will blink if
+    // config.device.led_heartbeat_disabled is changed
+    if (config.device.led_heartbeat_disabled)
+        return 1000;
+
     static bool ledOn;
     ledOn ^= 1;
 
@@ -188,9 +197,6 @@ uint32_t timeLastPowered = 0;
 
 static Periodic *ledPeriodic;
 static OSThread *powerFSMthread;
-#if HAS_BUTTON || defined(ARCH_PORTDUINO)
-static OSThread *buttonThread;
-#endif
 static OSThread *accelerometerThread;
 static OSThread *ambientLightingThread;
 SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
@@ -386,7 +392,7 @@ void setup()
     // We need to scan here to decide if we have a screen for nodeDB.init() and because power has been applied to
     // accessories
     auto i2cScanner = std::unique_ptr<ScanI2CTwoWire>(new ScanI2CTwoWire());
-#ifdef HAS_WIRE
+#if HAS_WIRE
     LOG_INFO("Scanning for i2c devices...\n");
 #endif
 
@@ -606,7 +612,9 @@ void setup()
     }
 #endif
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#if defined(HAS_NEOPIXEL) || defined(UNPHONE) || defined(RGBLED_RED)
+    ambientLightingThread = new AmbientLightingThread(ScanI2C::DeviceType::NONE);
+#elif !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
     if (rgb_found.type != ScanI2C::DeviceType::NONE) {
         ambientLightingThread = new AmbientLightingThread(rgb_found.type);
     }
@@ -629,14 +637,12 @@ void setup()
     pinMode(LORA_CS, OUTPUT);
     digitalWrite(LORA_CS, HIGH);
     SPI1.begin(false);
-#else  // HW_SPI1_DEVICE
+#else                      // HW_SPI1_DEVICE
     SPI.setSCK(LORA_SCK);
     SPI.setTX(LORA_MOSI);
     SPI.setRX(LORA_MISO);
     SPI.begin(false);
-#endif // HW_SPI1_DEVICE
-#elif ARCH_PORTDUINO
-    SPI.begin(settingsStrings[spidev].c_str());
+#endif                     // HW_SPI1_DEVICE
 #elif !defined(ARCH_ESP32) // ARCH_RP2040
     SPI.begin();
 #else
@@ -649,6 +655,15 @@ void setup()
     // Initialize the screen first so we can show the logo while we start up everything else.
     screen = new graphics::Screen(screen_found, screen_model, screen_geometry);
 
+    // setup TZ prior to time actions.
+    if (*config.device.tzdef) {
+        setenv("TZ", config.device.tzdef, 1);
+    } else {
+        setenv("TZ", "GMT0", 1);
+    }
+    tzset();
+    LOG_DEBUG("Set Timezone to %s\n", getenv("TZ"));
+
     readFromRTC(); // read the main CPU RTC at first (in case we can't get GPS time)
 
 #if !MESHTASTIC_EXCLUDE_GPS
@@ -686,7 +701,7 @@ void setup()
 
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)
-#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS)
+#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(HX8357_CS)
     screen->setup();
 #elif defined(ARCH_PORTDUINO)
     if (screen_found.port != ScanI2C::I2CPort::NO_I2C || settingsMap[displayPanel]) {
@@ -714,7 +729,7 @@ void setup()
     if (settingsMap[use_sx1262]) {
         if (!rIf) {
             LOG_DEBUG("Attempting to activate sx1262 radio on SPI port %s\n", settingsStrings[spidev].c_str());
-            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(*LoraSPI, spiSettings);
             rIf = new SX1262Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset],
                                       settingsMap[busy]);
             if (!rIf->init()) {
@@ -728,7 +743,7 @@ void setup()
     } else if (settingsMap[use_rf95]) {
         if (!rIf) {
             LOG_DEBUG("Attempting to activate rf95 radio on SPI port %s\n", settingsStrings[spidev].c_str());
-            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(*LoraSPI, spiSettings);
             rIf = new RF95Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset],
                                     settingsMap[busy]);
             if (!rIf->init()) {
@@ -743,7 +758,7 @@ void setup()
     } else if (settingsMap[use_sx1280]) {
         if (!rIf) {
             LOG_DEBUG("Attempting to activate sx1280 radio on SPI port %s\n", settingsStrings[spidev].c_str());
-            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(*LoraSPI, spiSettings);
             rIf = new SX1280Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset],
                                       settingsMap[busy]);
             if (!rIf->init()) {
@@ -755,6 +770,21 @@ void setup()
                 LOG_INFO("SX1280 Radio init succeeded, using SX1280 radio\n");
             }
         }
+    } else if (settingsMap[use_sx1268]) {
+        if (!rIf) {
+            LOG_DEBUG("Attempting to activate sx1268 radio on SPI port %s\n", settingsStrings[spidev].c_str());
+            LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(*LoraSPI, spiSettings);
+            rIf = new SX1268Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset],
+                                      settingsMap[busy]);
+            if (!rIf->init()) {
+                LOG_ERROR("Failed to find SX1268 radio\n");
+                delete rIf;
+                rIf = NULL;
+                exit(EXIT_FAILURE);
+            } else {
+                LOG_INFO("SX1268 Radio init succeeded, using SX1268 radio\n");
+            }
+        }
     }
 
 #elif defined(HW_SPI1_DEVICE)
@@ -773,6 +803,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("STM32WL Radio init succeeded, using STM32WL radio\n");
+            radioType = STM32WLx_RADIO;
         }
     }
 #endif
@@ -786,6 +817,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("Using SIMULATED radio!\n");
+            radioType = SIM_RADIO;
         }
     }
 #endif
@@ -799,6 +831,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("RF95 Radio init succeeded, using RF95 radio\n");
+            radioType = RF95_RADIO;
         }
     }
 #endif
@@ -812,6 +845,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("SX1262 Radio init succeeded, using SX1262 radio\n");
+            radioType = SX1262_RADIO;
         }
     }
 #endif
@@ -825,6 +859,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("SX1268 Radio init succeeded, using SX1268 radio\n");
+            radioType = SX1268_RADIO;
         }
     }
 #endif
@@ -838,6 +873,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("LLCC68 Radio init succeeded, using LLCC68 radio\n");
+            radioType = LLCC68_RADIO;
         }
     }
 #endif
@@ -851,6 +887,7 @@ void setup()
             rIf = NULL;
         } else {
             LOG_INFO("SX1280 Radio init succeeded, using SX1280 radio\n");
+            radioType = SX1280_RADIO;
         }
     }
 #endif
@@ -986,4 +1023,4 @@ void loop()
         mainDelay.delay(delayMsec);
     }
     // if (didWake) LOG_DEBUG("wake!\n");
-}
+}

src/main.h

@@ -22,6 +22,11 @@ extern NimbleBluetooth *nimbleBluetooth;
 extern NRF52Bluetooth *nrf52Bluetooth;
 #endif
 
+#if ARCH_PORTDUINO
+extern HardwareSPI *DisplaySPI;
+extern HardwareSPI *LoraSPI;
+
+#endif
 extern ScanI2C::DeviceAddress screen_found;
 extern ScanI2C::DeviceAddress cardkb_found;
 extern uint8_t kb_model;

src/mesh/Default.h

@@ -2,6 +2,7 @@
 #include <NodeDB.h>
 #include <cstdint>
 #define ONE_DAY 24 * 60 * 60
+#define ONE_MINUTE_MS 60 * 1000
 
 #define default_gps_update_interval IF_ROUTER(ONE_DAY, 2 * 60)
 #define default_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 15 * 60)
@@ -27,4 +28,4 @@ class Default
     static uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval);
     static uint32_t getConfiguredOrDefaultMs(uint32_t configuredInterval, uint32_t defaultInterval);
     static uint32_t getConfiguredOrDefault(uint32_t configured, uint32_t defaultValue);
-};
+};

src/mesh/MeshModule.cpp

@@ -12,7 +12,7 @@ const meshtastic_MeshPacket *MeshModule::currentRequest;
 
 /**
  * If any of the current chain of modules has already sent a reply, it will be here.  This is useful to allow
- * the RoutingPlugin to avoid sending redundant acks
+ * the RoutingModule to avoid sending redundant acks
  */
 meshtastic_MeshPacket *MeshModule::currentReply;
 
@@ -40,7 +40,7 @@ meshtastic_MeshPacket *MeshModule::allocAckNak(meshtastic_Routing_Error err, Nod
     c.error_reason = err;
     c.which_variant = meshtastic_Routing_error_reason_tag;
 
-    // Now that we have moded sendAckNak up one level into the class hierarchy we can no longer assume we are a RoutingPlugin
+    // Now that we have moded sendAckNak up one level into the class hierarchy we can no longer assume we are a RoutingModule
     // So we manually call pb_encode_to_bytes and specify routing port number
     // auto p = allocDataProtobuf(c);
     meshtastic_MeshPacket *p = router->allocForSending();
@@ -54,7 +54,8 @@ meshtastic_MeshPacket *MeshModule::allocAckNak(meshtastic_Routing_Error err, Nod
     p->to = to;
     p->decoded.request_id = idFrom;
     p->channel = chIndex;
-    LOG_ERROR("Alloc an err=%d,to=0x%x,idFrom=0x%x,id=0x%x\n", err, to, idFrom, p->id);
+    if (err != meshtastic_Routing_Error_NONE)
+        LOG_ERROR("Alloc an err=%d,to=0x%x,idFrom=0x%x,id=0x%x\n", err, to, idFrom, p->id);
 
     return p;
 }
@@ -68,7 +69,7 @@ meshtastic_MeshPacket *MeshModule::allocErrorResponse(meshtastic_Routing_Error e
     return r;
 }
 
-void MeshModule::callPlugins(meshtastic_MeshPacket &mp, RxSource src)
+void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src)
 {
     // LOG_DEBUG("In call modules\n");
     bool moduleFound = false;
@@ -258,7 +259,7 @@ void MeshModule::observeUIEvents(Observer<const UIFrameEvent *> *observer)
     }
 }
 
-AdminMessageHandleResult MeshModule::handleAdminMessageForAllPlugins(const meshtastic_MeshPacket &mp,
+AdminMessageHandleResult MeshModule::handleAdminMessageForAllModules(const meshtastic_MeshPacket &mp,
                                                                      meshtastic_AdminMessage *request,
                                                                      meshtastic_AdminMessage *response)
 {

src/mesh/MeshModule.h

@@ -64,11 +64,11 @@ class MeshModule
 
     /** For use only by MeshService
      */
-    static void callPlugins(meshtastic_MeshPacket &mp, RxSource src = RX_SRC_RADIO);
+    static void callModules(meshtastic_MeshPacket &mp, RxSource src = RX_SRC_RADIO);
 
     static std::vector<MeshModule *> GetMeshModulesWithUIFrames();
     static void observeUIEvents(Observer<const UIFrameEvent *> *observer);
-    static AdminMessageHandleResult handleAdminMessageForAllPlugins(const meshtastic_MeshPacket &mp,
+    static AdminMessageHandleResult handleAdminMessageForAllModules(const meshtastic_MeshPacket &mp,
                                                                     meshtastic_AdminMessage *request,
                                                                     meshtastic_AdminMessage *response);
 #if HAS_SCREEN
@@ -195,4 +195,4 @@ class MeshModule
 /** set the destination and packet parameters of packet p intended as a reply to a particular "to" packet
  * This ensures that if the request packet was sent reliably, the reply is sent that way as well.
  */
-void setReplyTo(meshtastic_MeshPacket *p, const meshtastic_MeshPacket &to);
+void setReplyTo(meshtastic_MeshPacket *p, const meshtastic_MeshPacket &to);

src/mesh/NodeDB.cpp

@@ -311,6 +311,12 @@ void NodeDB::initConfigIntervals()
     config.power.wait_bluetooth_secs = default_wait_bluetooth_secs;
 
     config.display.screen_on_secs = default_screen_on_secs;
+
+#if defined(T_WATCH_S3) || defined(T_DECK)
+    config.power.is_power_saving = true;
+    config.display.screen_on_secs = 30;
+    config.power.wait_bluetooth_secs = 30;
+#endif
 }
 
 void NodeDB::installDefaultModuleConfig()
@@ -346,6 +352,9 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.external_notification.alert_message = true;
     moduleConfig.external_notification.output_ms = 100;
     moduleConfig.external_notification.active = true;
+#endif
+#ifdef TTGO_T_ECHO
+    config.display.wake_on_tap_or_motion = true; // Enable touch button for screen-on / refresh
 #endif
     moduleConfig.has_canned_message = true;
 
@@ -517,11 +526,12 @@ void NodeDB::installDefaultDeviceState()
  */
 void NodeDB::pickNewNodeNum()
 {
-
+    NodeNum nodeNum = myNodeInfo.my_node_num;
     getMacAddr(ourMacAddr); // Make sure ourMacAddr is set
-
-    // Pick an initial nodenum based on the macaddr
-    NodeNum nodeNum = (ourMacAddr[2] << 24) | (ourMacAddr[3] << 16) | (ourMacAddr[4] << 8) | ourMacAddr[5];
+    if (nodeNum == 0) {
+        // Pick an initial nodenum based on the macaddr
+        nodeNum = (ourMacAddr[2] << 24) | (ourMacAddr[3] << 16) | (ourMacAddr[4] << 8) | ourMacAddr[5];
+    }
 
     meshtastic_NodeInfoLite *found;
     while ((nodeNum == NODENUM_BROADCAST || nodeNum < NUM_RESERVED) ||
@@ -541,12 +551,17 @@ static const char *moduleConfigFileName = "/prefs/module.proto";
 static const char *channelFileName = "/prefs/channels.proto";
 static const char *oemConfigFile = "/oem/oem.proto";
 
-/** Load a protobuf from a file, return true for success */
-bool NodeDB::loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, void *dest_struct)
+/** Load a protobuf from a file, return LoadFileResult */
+LoadFileResult NodeDB::loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields,
+                                 void *dest_struct)
 {
-    bool okay = false;
+    LoadFileResult state = LoadFileResult::OTHER_FAILURE;
 #ifdef FSCom
-    // static DeviceState scratch; We no longer read into a tempbuf because this structure is 15KB of valuable RAM
+
+    if (!FSCom.exists(filename)) {
+        LOG_INFO("File %s not found\n", filename);
+        return LoadFileResult::NOT_FOUND;
+    }
 
     auto f = FSCom.open(filename, FILE_O_READ);
 
@@ -554,30 +569,32 @@ bool NodeDB::loadProto(const char *filename, size_t protoSize, size_t objSize, c
         LOG_INFO("Loading %s\n", filename);
         pb_istream_t stream = {&readcb, &f, protoSize};
 
-        // LOG_DEBUG("Preload channel name=%s\n", channelSettings.name);
-
         memset(dest_struct, 0, objSize);
         if (!pb_decode(&stream, fields, dest_struct)) {
             LOG_ERROR("Error: can't decode protobuf %s\n", PB_GET_ERROR(&stream));
+            state = LoadFileResult::DECODE_FAILED;
         } else {
-            okay = true;
+            LOG_INFO("Loaded %s successfully\n", filename);
+            state = LoadFileResult::SUCCESS;
         }
-
         f.close();
     } else {
-        LOG_INFO("No %s preferences found\n", filename);
+        LOG_ERROR("Could not open / read %s\n", filename);
     }
 #else
     LOG_ERROR("ERROR: Filesystem not implemented\n");
+    state = LoadFileState::NO_FILESYSTEM;
 #endif
-    return okay;
+    return state;
 }
 
 void NodeDB::loadFromDisk()
 {
     // static DeviceState scratch; We no longer read into a tempbuf because this structure is 15KB of valuable RAM
-    if (!loadProto(prefFileName, sizeof(meshtastic_DeviceState) + MAX_NUM_NODES * sizeof(meshtastic_NodeInfo),
-                   sizeof(meshtastic_DeviceState), &meshtastic_DeviceState_msg, &devicestate)) {
+    auto state = loadProto(prefFileName, sizeof(meshtastic_DeviceState) + MAX_NUM_NODES * sizeof(meshtastic_NodeInfo),
+                           sizeof(meshtastic_DeviceState), &meshtastic_DeviceState_msg, &devicestate);
+
+    if (state != LoadFileResult::SUCCESS) {
         installDefaultDeviceState(); // Our in RAM copy might now be corrupt
     } else {
         if (devicestate.version < DEVICESTATE_MIN_VER) {
@@ -592,8 +609,9 @@ void NodeDB::loadFromDisk()
     }
     meshNodes->resize(MAX_NUM_NODES);
 
-    if (!loadProto(configFileName, meshtastic_LocalConfig_size, sizeof(meshtastic_LocalConfig), &meshtastic_LocalConfig_msg,
-                   &config)) {
+    state = loadProto(configFileName, meshtastic_LocalConfig_size, sizeof(meshtastic_LocalConfig), &meshtastic_LocalConfig_msg,
+                      &config);
+    if (state != LoadFileResult::SUCCESS) {
         installDefaultConfig(); // Our in RAM copy might now be corrupt
     } else {
         if (config.version < DEVICESTATE_MIN_VER) {
@@ -604,8 +622,9 @@ void NodeDB::loadFromDisk()
         }
     }
 
-    if (!loadProto(moduleConfigFileName, meshtastic_LocalModuleConfig_size, sizeof(meshtastic_LocalModuleConfig),
-                   &meshtastic_LocalModuleConfig_msg, &moduleConfig)) {
+    state = loadProto(moduleConfigFileName, meshtastic_LocalModuleConfig_size, sizeof(meshtastic_LocalModuleConfig),
+                      &meshtastic_LocalModuleConfig_msg, &moduleConfig);
+    if (state != LoadFileResult::SUCCESS) {
         installDefaultModuleConfig(); // Our in RAM copy might now be corrupt
     } else {
         if (moduleConfig.version < DEVICESTATE_MIN_VER) {
@@ -616,8 +635,9 @@ void NodeDB::loadFromDisk()
         }
     }
 
-    if (!loadProto(channelFileName, meshtastic_ChannelFile_size, sizeof(meshtastic_ChannelFile), &meshtastic_ChannelFile_msg,
-                   &channelFile)) {
+    state = loadProto(channelFileName, meshtastic_ChannelFile_size, sizeof(meshtastic_ChannelFile), &meshtastic_ChannelFile_msg,
+                      &channelFile);
+    if (state != LoadFileResult::SUCCESS) {
         installDefaultChannels(); // Our in RAM copy might now be corrupt
     } else {
         if (channelFile.version < DEVICESTATE_MIN_VER) {
@@ -628,7 +648,8 @@ void NodeDB::loadFromDisk()
         }
     }
 
-    if (loadProto(oemConfigFile, meshtastic_OEMStore_size, sizeof(meshtastic_OEMStore), &meshtastic_OEMStore_msg, &oemStore)) {
+    state = loadProto(oemConfigFile, meshtastic_OEMStore_size, sizeof(meshtastic_OEMStore), &meshtastic_OEMStore_msg, &oemStore);
+    if (state == LoadFileResult::SUCCESS) {
         LOG_INFO("Loaded OEMStore\n");
     }
 }
@@ -667,9 +688,13 @@ bool NodeDB::saveProto(const char *filename, size_t protoSize, const pb_msgdesc_
         static uint8_t failedCounter = 0;
         failedCounter++;
         if (failedCounter >= 2) {
-            FSCom.format();
-            // After formatting, the device needs to be restarted
-            nodeDB->resetRadioConfig(true);
+            LOG_ERROR("Failed to save file twice. Rebooting...\n");
+            delay(100);
+            NVIC_SystemReset();
+            // We used to blow away the filesystem here, but that's a bit extreme
+            // FSCom.format();
+            // // After formatting, the device needs to be restarted
+            // nodeDB->resetRadioConfig(true);
         }
 #endif
     }
@@ -713,6 +738,7 @@ void NodeDB::saveToDisk(int saveWhat)
         config.has_power = true;
         config.has_network = true;
         config.has_bluetooth = true;
+
         saveProto(configFileName, meshtastic_LocalConfig_size, &meshtastic_LocalConfig_msg, &config);
     }
 
@@ -724,6 +750,12 @@ void NodeDB::saveToDisk(int saveWhat)
         moduleConfig.has_serial = true;
         moduleConfig.has_store_forward = true;
         moduleConfig.has_telemetry = true;
+        moduleConfig.has_neighbor_info = true;
+        moduleConfig.has_detection_sensor = true;
+        moduleConfig.has_ambient_lighting = true;
+        moduleConfig.has_audio = true;
+        moduleConfig.has_paxcounter = true;
+
         saveProto(moduleConfigFileName, meshtastic_LocalModuleConfig_size, &meshtastic_LocalModuleConfig_msg, &moduleConfig);
     }
 
@@ -781,6 +813,7 @@ size_t NodeDB::getNumOnlineMeshNodes(bool localOnly)
 }
 
 #include "MeshModule.h"
+#include "Throttle.h"
 
 /** Update position info for this node based on received position data
  */
@@ -875,8 +908,10 @@ bool NodeDB::updateUser(uint32_t nodeId, const meshtastic_User &p, uint8_t chann
         powerFSM.trigger(EVENT_NODEDB_UPDATED);
         notifyObservers(true); // Force an update whether or not our node counts have changed
 
-        // We just changed something important about the user, store our DB
-        saveToDisk(SEGMENT_DEVICESTATE);
+        // We just changed something about the user, store our DB
+        Throttle::execute(
+            &lastNodeDbSave, ONE_MINUTE_MS, []() { nodeDB->saveToDisk(SEGMENT_DEVICESTATE); },
+            []() { LOG_DEBUG("Deferring NodeDB saveToDisk for now, since we saved less than a minute ago\n"); });
     }
 
     return changed;

src/mesh/NodeDB.h

@@ -38,6 +38,19 @@ uint32_t sinceLastSeen(const meshtastic_NodeInfoLite *n);
 /// Given a packet, return how many seconds in the past (vs now) it was received
 uint32_t sinceReceived(const meshtastic_MeshPacket *p);
 
+enum LoadFileResult {
+    // Successfully opened the file
+    SUCCESS = 1,
+    // File does not exist
+    NOT_FOUND = 2,
+    // Device does not have a filesystem
+    NO_FILESYSTEM = 3,
+    // File exists, but could not decode protobufs
+    DECODE_FAILED = 4,
+    // File exists, but open failed for some reason
+    OTHER_FAILURE = 5
+};
+
 class NodeDB
 {
     // NodeNum provisionalNodeNum; // if we are trying to find a node num this is our current attempt
@@ -115,7 +128,8 @@ class NodeDB
 
     bool factoryReset();
 
-    bool loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields, void *dest_struct);
+    LoadFileResult loadProto(const char *filename, size_t protoSize, size_t objSize, const pb_msgdesc_t *fields,
+                             void *dest_struct);
     bool saveProto(const char *filename, size_t protoSize, const pb_msgdesc_t *fields, const void *dest_struct);
 
     void installRoleDefaults(meshtastic_Config_DeviceConfig_Role role);
@@ -136,16 +150,18 @@ class NodeDB
     void setLocalPosition(meshtastic_Position position, bool timeOnly = false)
     {
         if (timeOnly) {
-            LOG_DEBUG("Setting local position time only: time=%i\n", position.time);
+            LOG_DEBUG("Setting local position time only: time=%u timestamp=%u\n", position.time, position.timestamp);
             localPosition.time = position.time;
+            localPosition.timestamp = position.timestamp > 0 ? position.timestamp : position.time;
             return;
         }
-        LOG_DEBUG("Setting local position: latitude=%i, longitude=%i, time=%i\n", position.latitude_i, position.longitude_i,
-                  position.time);
+        LOG_DEBUG("Setting local position: latitude=%i, longitude=%i, time=%u, timestamp=%u\n", position.latitude_i,
+                  position.longitude_i, position.time, position.timestamp);
         localPosition = position;
     }
 
   private:
+    uint32_t lastNodeDbSave = 0; // when we last saved our db to flash
     /// Find a node in our DB, create an empty NodeInfoLite if missing
     meshtastic_NodeInfoLite *getOrCreateMeshNode(NodeNum n);
 
@@ -215,4 +231,4 @@ extern uint32_t error_address;
      ModuleConfig_RangeTestConfig_size + ModuleConfig_SerialConfig_size + ModuleConfig_StoreForwardConfig_size +                 \
      ModuleConfig_TelemetryConfig_size + ModuleConfig_size)
 
-// Please do not remove this comment, it makes trunk and compiler happy at the same time.
+// Please do not remove this comment, it makes trunk and compiler happy at the same time.

src/mesh/PhoneAPI.cpp

@@ -430,6 +430,9 @@ bool PhoneAPI::available()
             auto nextNode = nodeDB->readNextMeshNode(readIndex);
             if (nextNode) {
                 nodeInfoForPhone = TypeConversions::ConvertToNodeInfo(nextNode);
+                nodeInfoForPhone.hops_away = nodeInfoForPhone.num == nodeDB->getNodeNum() ? 0 : nodeInfoForPhone.hops_away;
+                nodeInfoForPhone.is_favorite =
+                    nodeInfoForPhone.is_favorite || nodeInfoForPhone.num == nodeDB->getNodeNum(); // Our node is always a favorite
             }
         }
         return true; // Always say we have something, because we might need to advance our state machine

src/mesh/RF95Interface.cpp

@@ -128,12 +128,18 @@ bool RF95Interface::reconfigure()
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
     err = lora->setSyncWord(syncWord);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting RF95 setSyncWord!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     err = lora->setCurrentLimit(currentLimit);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting RF95 setCurrentLimit!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     err = lora->setPreambleLength(preambleLength);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting RF95 setPreambleLength!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     err = lora->setFrequency(getFreq());
@@ -164,6 +170,8 @@ void RF95Interface::addReceiveMetadata(meshtastic_MeshPacket *mp)
 void RF95Interface::setStandby()
 {
     int err = lora->standby();
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting RF95 standby!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     isReceiving = false; // If we were receiving, not any more
@@ -185,6 +193,8 @@ void RF95Interface::startReceive()
     setTransmitEnable(false);
     setStandby();
     int err = lora->startReceive();
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting RF95 startReceive!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     isReceiving = true;
@@ -205,6 +215,8 @@ bool RF95Interface::isChannelActive()
         // LOG_DEBUG("Channel is busy!\n");
         return true;
     }
+    if (result != RADIOLIB_CHANNEL_FREE)
+        LOG_ERROR("Radiolib error %d when attempting RF95 isChannelActive!\n", result);
     assert(result != RADIOLIB_ERR_WRONG_MODEM);
 
     // LOG_DEBUG("Channel is free!\n");

src/mesh/RadioInterface.cpp

@@ -76,9 +76,12 @@ const RegionInfo regions[] = {
     RDEF(KR, 920.0f, 923.0f, 100, 0, 0, true, false, false),
 
     /*
-        ???
+        Taiwan, 920-925Mhz, limited to 0.5W indoor or coastal, 1.0W outdoor.
+        5.8.1 in the Low-power Radio-frequency Devices Technical Regulations
+        https://www.ncc.gov.tw/english/files/23070/102_5190_230703_1_doc_C.PDF
+        https://gazette.nat.gov.tw/egFront/e_detail.do?metaid=147283
      */
-    RDEF(TW, 920.0f, 925.0f, 100, 0, 0, true, false, false),
+    RDEF(TW, 920.0f, 925.0f, 100, 0, 27, true, false, false),
 
     /*
         https://lora-alliance.org/wp-content/uploads/2020/11/lorawan_regional_parameters_v1.0.3reva_0.pdf
@@ -151,10 +154,16 @@ static uint8_t bytes[MAX_RHPACKETLEN];
 void initRegion()
 {
     const RegionInfo *r = regions;
+#ifdef LORA_REGIONCODE
+    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != LORA_REGIONCODE; r++)
+        ;
+    LOG_INFO("Wanted region %d, regulatory override to %s\n", config.lora.region, r->name);
+#else
     for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != config.lora.region; r++)
         ;
-    myRegion = r;
     LOG_INFO("Wanted region %d, using %s\n", config.lora.region, r->name);
+#endif
+    myRegion = r;
 }
 
 /**
@@ -486,7 +495,7 @@ void RadioInterface::applyModemConfig()
     // If user has manually specified a channel num, then use that, otherwise generate one by hashing the name
     const char *channelName = channels.getName(channels.getPrimaryIndex());
     // channel_num is actually (channel_num - 1), since modulus (%) returns values from 0 to (numChannels - 1)
-    int channel_num = (loraConfig.channel_num ? loraConfig.channel_num - 1 : hash(channelName)) % numChannels;
+    uint channel_num = (loraConfig.channel_num ? loraConfig.channel_num - 1 : hash(channelName)) % numChannels;
 
     // Check if we use the default frequency slot
     RadioInterface::uses_default_frequency_slot =
@@ -580,4 +589,4 @@ size_t RadioInterface::beginSending(meshtastic_MeshPacket *p)
 
     sendingPacket = p;
     return p->encrypted.size + sizeof(PacketHeader);
-}
+}

src/mesh/RadioLibInterface.cpp

@@ -22,6 +22,12 @@ void LockingArduinoHal::spiEndTransaction()
 
     ArduinoHal::spiEndTransaction();
 }
+#if ARCH_PORTDUINO
+void LockingArduinoHal::spiTransfer(uint8_t *out, size_t len, uint8_t *in)
+{
+    spi->transfer(out, in, len);
+}
+#endif
 
 RadioLibInterface::RadioLibInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
                                      RADIOLIB_PIN_TYPE busy, PhysicalLayer *_iface)
@@ -313,7 +319,7 @@ void RadioLibInterface::handleReceiveInterrupt()
     // when this is called, we should be in receive mode - if we are not, just jump out instead of bombing. Possible Race
     // Condition?
     if (!isReceiving) {
-        LOG_DEBUG("*** WAS_ASSERT *** handleReceiveInterrupt called when not in receive mode\n");
+        LOG_ERROR("handleReceiveInterrupt called when not in receive mode, which shouldn't happen.\n");
         return;
     }
 
@@ -408,4 +414,4 @@ void RadioLibInterface::startSend(meshtastic_MeshPacket *txp)
         // bits
         enableInterrupt(isrTxLevel0);
     }
-}
+}

src/mesh/RadioLibInterface.h

@@ -25,6 +25,9 @@ class LockingArduinoHal : public ArduinoHal
 
     void spiBeginTransaction() override;
     void spiEndTransaction() override;
+#if ARCH_PORTDUINO
+    void spiTransfer(uint8_t *out, size_t len, uint8_t *in) override;
+#endif
 };
 
 #if defined(USE_STM32WLx)

src/mesh/Router.cpp

@@ -8,9 +8,6 @@
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "modules/RoutingModule.h"
-extern "C" {
-#include "mesh/compression/unishox2.h"
-}
 #if !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #endif
@@ -332,6 +329,7 @@ bool perhapsDecode(meshtastic_MeshPacket *p)
                 p->which_payload_variant = meshtastic_MeshPacket_decoded_tag; // change type to decoded
                 p->channel = chIndex;                                         // change to store the index instead of the hash
 
+                /* Not actually ever used.
                 // Decompress if needed. jm
                 if (p->decoded.portnum == meshtastic_PortNum_TEXT_MESSAGE_COMPRESSED_APP) {
                     // Decompress the payload
@@ -349,7 +347,7 @@ bool perhapsDecode(meshtastic_MeshPacket *p)
 
                     // Switch the port from PortNum_TEXT_MESSAGE_COMPRESSED_APP to PortNum_TEXT_MESSAGE_APP
                     p->decoded.portnum = meshtastic_PortNum_TEXT_MESSAGE_APP;
-                }
+                } */
 
                 printPacket("decoded message", p);
                 return true;
@@ -371,6 +369,7 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
     if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
         size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded);
 
+        /* Not actually used, so save the cycles
         // Only allow encryption on the text message app.
         //  TODO: Allow modules to opt into compression.
         if (p->decoded.portnum == meshtastic_PortNum_TEXT_MESSAGE_APP) {
@@ -404,7 +403,7 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
 
                 p->decoded.portnum = meshtastic_PortNum_TEXT_MESSAGE_COMPRESSED_APP;
             }
-        }
+        } */
 
         if (numbytes > MAX_RHPACKETLEN)
             return meshtastic_Routing_Error_TOO_LARGE;
@@ -466,21 +465,22 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
             cancelSending(p->from, p->id);
             skipHandle = true;
         }
-#if !MESHTASTIC_EXCLUDE_MQTT
-        // Publish received message to MQTT if we're not the original transmitter of the packet
-        if (!skipHandle && moduleConfig.mqtt.enabled && getFrom(p) != nodeDB->getNodeNum() && mqtt)
-            mqtt->onSend(*p_encrypted, *p, p->channel);
-#endif
-
     } else {
         printPacket("packet decoding failed or skipped (no PSK?)", p);
     }
 
-    packetPool.release(p_encrypted); // Release the encrypted packet
-
     // call modules here
-    if (!skipHandle)
-        MeshModule::callPlugins(*p, src);
+    if (!skipHandle) {
+        MeshModule::callModules(*p, src);
+
+#if !MESHTASTIC_EXCLUDE_MQTT
+        // After potentially altering it, publish received message to MQTT if we're not the original transmitter of the packet
+        if (decoded && moduleConfig.mqtt.enabled && getFrom(p) != nodeDB->getNodeNum() && mqtt)
+            mqtt->onSend(*p_encrypted, *p, p->channel);
+#endif
+    }
+
+    packetPool.release(p_encrypted); // Release the encrypted packet
 }
 
 void Router::perhapsHandleReceived(meshtastic_MeshPacket *p)

src/mesh/SX126xInterface.cpp

@@ -181,12 +181,18 @@ template <typename T> bool SX126xInterface<T>::reconfigure()
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
     err = lora.setSyncWord(syncWord);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting SX126X setSyncWord!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     err = lora.setCurrentLimit(currentLimit);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting SX126X setCurrentLimit!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     err = lora.setPreambleLength(preambleLength);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting SX126X setPreambleLength!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     err = lora.setFrequency(getFreq());
@@ -197,6 +203,8 @@ template <typename T> bool SX126xInterface<T>::reconfigure()
         power = SX126X_MAX_POWER;
 
     err = lora.setOutputPower(power);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting SX126X setOutputPower!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     startReceive(); // restart receiving
@@ -215,10 +223,8 @@ template <typename T> void SX126xInterface<T>::setStandby()
 
     int err = lora.standby();
 
-    if (err != RADIOLIB_ERR_NONE) {
+    if (err != RADIOLIB_ERR_NONE)
         LOG_DEBUG("SX126x standby failed with error %d\n", err);
-    }
-
     assert(err == RADIOLIB_ERR_NONE);
 
     isReceiving = false; // If we were receiving, not any more
@@ -260,6 +266,8 @@ template <typename T> void SX126xInterface<T>::startReceive()
     int err = lora.startReceiveDutyCycleAuto(preambleLength, 8,
                                              RADIOLIB_SX126X_IRQ_RX_DEFAULT | RADIOLIB_SX126X_IRQ_PREAMBLE_DETECTED |
                                                  RADIOLIB_SX126X_IRQ_HEADER_VALID);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting SX126X startReceiveDutyCycleAuto!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     isReceiving = true;
@@ -279,7 +287,8 @@ template <typename T> bool SX126xInterface<T>::isChannelActive()
     result = lora.scanChannel();
     if (result == RADIOLIB_LORA_DETECTED)
         return true;
-
+    if (result != RADIOLIB_CHANNEL_FREE)
+        LOG_ERROR("Radiolib error %d when attempting SX126X scanChannel!\n", result);
     assert(result != RADIOLIB_ERR_WRONG_MODEM);
 
     return false;

src/mesh/SX128xInterface.cpp

@@ -126,9 +126,13 @@ template <typename T> bool SX128xInterface<T>::reconfigure()
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING);
 
     err = lora.setSyncWord(syncWord);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting SX128X setSyncWord!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     err = lora.setPreambleLength(preambleLength);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting SX128X setPreambleLength!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     err = lora.setFrequency(getFreq());
@@ -139,6 +143,8 @@ template <typename T> bool SX128xInterface<T>::reconfigure()
         power = SX128X_MAX_POWER;
 
     err = lora.setOutputPower(power);
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting SX128X setOutputPower!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     startReceive(); // restart receiving
@@ -162,10 +168,8 @@ template <typename T> void SX128xInterface<T>::setStandby()
 
     int err = lora.standby();
 
-    if (err != RADIOLIB_ERR_NONE) {
+    if (err != RADIOLIB_ERR_NONE)
         LOG_ERROR("SX128x standby failed with error %d\n", err);
-    }
-
     assert(err == RADIOLIB_ERR_NONE);
 #if ARCH_PORTDUINO
     if (settingsMap[rxen] != RADIOLIB_NC) {
@@ -255,6 +259,8 @@ template <typename T> void SX128xInterface<T>::startReceive()
         lora.startReceive(RADIOLIB_SX128X_RX_TIMEOUT_INF, RADIOLIB_SX128X_IRQ_RX_DEFAULT | RADIOLIB_SX128X_IRQ_PREAMBLE_DETECTED |
                                                               RADIOLIB_SX128X_IRQ_HEADER_VALID);
 
+    if (err != RADIOLIB_ERR_NONE)
+        LOG_ERROR("Radiolib error %d when attempting SX128X startReceive!\n", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     isReceiving = true;
@@ -274,7 +280,8 @@ template <typename T> bool SX128xInterface<T>::isChannelActive()
     result = lora.scanChannel();
     if (result == RADIOLIB_LORA_DETECTED)
         return true;
-
+    if (result != RADIOLIB_CHANNEL_FREE)
+        LOG_ERROR("Radiolib error %d when attempting SX128X scanChannel!\n", result);
     assert(result != RADIOLIB_ERR_WRONG_MODEM);
 
     return false;

src/mesh/Throttle.cpp

@@ -0,0 +1,27 @@
+#include "Throttle.h"
+#include <Arduino.h>
+
+/// @brief Execute a function throttled to a minimum interval
+/// @param lastExecutionMs Pointer to the last execution time in milliseconds
+/// @param minumumIntervalMs Minimum execution interval in milliseconds
+/// @param throttleFunc Function to execute if the execution is not deferred
+/// @param onDefer Default to NULL, execute the function if the execution is deferred
+/// @return true if the function was executed, false if it was deferred
+bool Throttle::execute(uint32_t *lastExecutionMs, uint32_t minumumIntervalMs, void (*throttleFunc)(void), void (*onDefer)(void))
+{
+    if (*lastExecutionMs == 0) {
+        *lastExecutionMs = millis();
+        throttleFunc();
+        return true;
+    }
+    uint32_t now = millis();
+
+    if ((now - *lastExecutionMs) >= minumumIntervalMs) {
+        throttleFunc();
+        *lastExecutionMs = now;
+        return true;
+    } else if (onDefer != NULL) {
+        onDefer();
+    }
+    return false;
+}

src/mesh/Throttle.h

@@ -0,0 +1,9 @@
+#pragma once
+#include <cstddef>
+#include <cstdint>
+
+class Throttle
+{
+  public:
+    static bool execute(uint32_t *lastExecutionMs, uint32_t minumumIntervalMs, void (*func)(void), void (*onDefer)(void) = NULL);
+};

src/mesh/generated/meshtastic/admin.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/admin.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/admin.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_ADMIN_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_ADMIN_PB_H_INCLUDED
@@ -340,6 +340,7 @@ extern const pb_msgdesc_t meshtastic_NodeRemoteHardwarePinsResponse_msg;
 #define meshtastic_NodeRemoteHardwarePinsResponse_fields &meshtastic_NodeRemoteHardwarePinsResponse_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_ADMIN_PB_H_MAX_SIZE meshtastic_AdminMessage_size
 #define meshtastic_AdminMessage_size             500
 #define meshtastic_HamParameters_size            32
 #define meshtastic_NodeRemoteHardwarePinsResponse_size 496

src/mesh/generated/meshtastic/apponly.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/apponly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/apponly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_APPONLY_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_APPONLY_PB_H_INCLUDED
@@ -54,6 +54,7 @@ extern const pb_msgdesc_t meshtastic_ChannelSet_msg;
 #define meshtastic_ChannelSet_fields &meshtastic_ChannelSet_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_APPONLY_PB_H_MAX_SIZE meshtastic_ChannelSet_size
 #define meshtastic_ChannelSet_size               658
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/atak.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/atak.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/atak.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_ATAK_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_ATAK_PB_H_INCLUDED
@@ -260,6 +260,7 @@ extern const pb_msgdesc_t meshtastic_PLI_msg;
 #define meshtastic_PLI_fields &meshtastic_PLI_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_ATAK_PB_H_MAX_SIZE meshtastic_TAKPacket_size
 #define meshtastic_Contact_size                  242
 #define meshtastic_GeoChat_size                  323
 #define meshtastic_Group_size                    4

src/mesh/generated/meshtastic/cannedmessages.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/cannedmessages.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/cannedmessages.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CANNEDMESSAGES_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CANNEDMESSAGES_PB_H_INCLUDED
@@ -40,6 +40,7 @@ extern const pb_msgdesc_t meshtastic_CannedMessageModuleConfig_msg;
 #define meshtastic_CannedMessageModuleConfig_fields &meshtastic_CannedMessageModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_CANNEDMESSAGES_PB_H_MAX_SIZE meshtastic_CannedMessageModuleConfig_size
 #define meshtastic_CannedMessageModuleConfig_size 203
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/channel.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/channel.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/channel.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CHANNEL_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CHANNEL_PB_H_INCLUDED
@@ -181,6 +181,7 @@ extern const pb_msgdesc_t meshtastic_Channel_msg;
 #define meshtastic_Channel_fields &meshtastic_Channel_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_CHANNEL_PB_H_MAX_SIZE meshtastic_Channel_size
 #define meshtastic_ChannelSettings_size          70
 #define meshtastic_Channel_size                  85
 #define meshtastic_ModuleSettings_size           6

src/mesh/generated/meshtastic/clientonly.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/clientonly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/clientonly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CLIENTONLY_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CLIENTONLY_PB_H_INCLUDED

src/mesh/generated/meshtastic/config.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/config.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/config.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CONFIG_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CONFIG_PB_H_INCLUDED
@@ -30,12 +30,12 @@ typedef enum _meshtastic_Config_DeviceConfig_Role {
     meshtastic_Config_DeviceConfig_Role_REPEATER = 4,
     /* Description: Broadcasts GPS position packets as priority.
  Technical Details: Position Mesh packets will be prioritized higher and sent more frequently by default.
-   When used in conjunction with power.is_power_saving = true, nodes will wake up, 
+   When used in conjunction with power.is_power_saving = true, nodes will wake up,
    send position, and then sleep for position.position_broadcast_secs seconds. */
     meshtastic_Config_DeviceConfig_Role_TRACKER = 5,
     /* Description: Broadcasts telemetry packets as priority.
  Technical Details: Telemetry Mesh packets will be prioritized higher and sent more frequently by default.
-   When used in conjunction with power.is_power_saving = true, nodes will wake up, 
+   When used in conjunction with power.is_power_saving = true, nodes will wake up,
    send environment telemetry, and then sleep for telemetry.environment_update_interval seconds. */
     meshtastic_Config_DeviceConfig_Role_SENSOR = 6,
     /* Description: Optimized for ATAK system communication and reduces routine broadcasts.
@@ -50,7 +50,7 @@ typedef enum _meshtastic_Config_DeviceConfig_Role {
     Can be used for clandestine operation or to dramatically reduce airtime / power consumption */
     meshtastic_Config_DeviceConfig_Role_CLIENT_HIDDEN = 8,
     /* Description: Broadcasts location as message to default channel regularly for to assist with device recovery.
- Technical Details: Used to automatically send a text message to the mesh 
+ Technical Details: Used to automatically send a text message to the mesh
     with the current position of the device on a frequent interval:
     "I'm lost! Position: lat / long" */
     meshtastic_Config_DeviceConfig_Role_LOST_AND_FOUND = 9,
@@ -281,6 +281,10 @@ typedef struct _meshtastic_Config_DeviceConfig {
     bool is_managed;
     /* Disables the triple-press of user button to enable or disable GPS */
     bool disable_triple_click;
+    /* POSIX Timezone definition string from https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv. */
+    char tzdef[65];
+    /* If true, disable the default blinking LED (LED_PIN) behavior on the device */
+    bool led_heartbeat_disabled;
 } meshtastic_Config_DeviceConfig;
 
 /* Position Config */
@@ -322,35 +326,30 @@ typedef struct _meshtastic_Config_PositionConfig {
 /* Power Config\
  See [Power Config](/docs/settings/config/power) for additional power config details. */
 typedef struct _meshtastic_Config_PowerConfig {
-    /* If set, we are powered from a low-current source (i.e. solar), so even if it looks like we have power flowing in
- we should try to minimize power consumption as much as possible.
- YOU DO NOT NEED TO SET THIS IF YOU'VE set is_router (it is implied in that case).
- Advanced Option */
+    /* Description: Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. 
+ Don't use this setting if you want to use your device with the phone apps or are using a device without a user button.
+ Technical Details: Works for ESP32 devices and NRF52 devices in the Sensor or Tracker roles */
     bool is_power_saving;
-    /* If non-zero, the device will fully power off this many seconds after external power is removed. */
+    /* Description: If non-zero, the device will fully power off this many seconds after external power is removed. */
     uint32_t on_battery_shutdown_after_secs;
     /* Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k)
  Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation.
- Should be set to floating point value between 2 and 4
- Fixes issues on Heltec v2 */
+ https://meshtastic.org/docs/configuration/radio/power/#adc-multiplier-override
+ Should be set to floating point value between 2 and 6 */
     float adc_multiplier_override;
-    /* Wait Bluetooth Seconds
- The number of seconds for to wait before turning off BLE in No Bluetooth states
- 0 for default of 1 minute */
+    /* Description: The number of seconds for to wait before turning off BLE in No Bluetooth states
+  Technical Details: ESP32 Only 0 for default of 1 minute */
     uint32_t wait_bluetooth_secs;
     /* Super Deep Sleep Seconds
  While in Light Sleep if mesh_sds_timeout_secs is exceeded we will lower into super deep sleep
  for this value (default 1 year) or a button press
  0 for default of one year */
     uint32_t sds_secs;
-    /* Light Sleep Seconds
- In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on
- ESP32 Only
- 0 for default of 300 */
+    /* Description: In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on
+ Technical Details: ESP32 Only 0 for default of 300 */
     uint32_t ls_secs;
-    /* Minimum Wake Seconds
- While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value
- 0 for default of 10 seconds */
+    /* Description: While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value
+ Technical Details: ESP32 Only 0 for default of 10 seconds */
     uint32_t min_wake_secs;
     /* I2C address of INA_2XX to use for reading device battery voltage */
     uint8_t device_battery_ina_address;
@@ -583,7 +582,7 @@ extern "C" {
 
 /* Initializer values for message structs */
 #define meshtastic_Config_init_default           {0, {meshtastic_Config_DeviceConfig_init_default}}
-#define meshtastic_Config_DeviceConfig_init_default {_meshtastic_Config_DeviceConfig_Role_MIN, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN, 0, 0, 0, 0}
+#define meshtastic_Config_DeviceConfig_init_default {_meshtastic_Config_DeviceConfig_Role_MIN, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN, 0, 0, 0, 0, "", 0}
 #define meshtastic_Config_PositionConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, _meshtastic_Config_PositionConfig_GpsMode_MIN}
 #define meshtastic_Config_PowerConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_Config_NetworkConfig_init_default {0, "", "", "", 0, _meshtastic_Config_NetworkConfig_AddressMode_MIN, false, meshtastic_Config_NetworkConfig_IpV4Config_init_default, ""}
@@ -592,7 +591,7 @@ extern "C" {
 #define meshtastic_Config_LoRaConfig_init_default {0, _meshtastic_Config_LoRaConfig_ModemPreset_MIN, 0, 0, 0, 0, _meshtastic_Config_LoRaConfig_RegionCode_MIN, 0, 0, 0, 0, 0, 0, 0, 0, {0, 0, 0}, 0}
 #define meshtastic_Config_BluetoothConfig_init_default {0, _meshtastic_Config_BluetoothConfig_PairingMode_MIN, 0}
 #define meshtastic_Config_init_zero              {0, {meshtastic_Config_DeviceConfig_init_zero}}
-#define meshtastic_Config_DeviceConfig_init_zero {_meshtastic_Config_DeviceConfig_Role_MIN, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN, 0, 0, 0, 0}
+#define meshtastic_Config_DeviceConfig_init_zero {_meshtastic_Config_DeviceConfig_Role_MIN, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN, 0, 0, 0, 0, "", 0}
 #define meshtastic_Config_PositionConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, _meshtastic_Config_PositionConfig_GpsMode_MIN}
 #define meshtastic_Config_PowerConfig_init_zero  {0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_Config_NetworkConfig_init_zero {0, "", "", "", 0, _meshtastic_Config_NetworkConfig_AddressMode_MIN, false, meshtastic_Config_NetworkConfig_IpV4Config_init_zero, ""}
@@ -612,6 +611,8 @@ extern "C" {
 #define meshtastic_Config_DeviceConfig_double_tap_as_button_press_tag 8
 #define meshtastic_Config_DeviceConfig_is_managed_tag 9
 #define meshtastic_Config_DeviceConfig_disable_triple_click_tag 10
+#define meshtastic_Config_DeviceConfig_tzdef_tag 11
+#define meshtastic_Config_DeviceConfig_led_heartbeat_disabled_tag 12
 #define meshtastic_Config_PositionConfig_position_broadcast_secs_tag 1
 #define meshtastic_Config_PositionConfig_position_broadcast_smart_enabled_tag 2
 #define meshtastic_Config_PositionConfig_fixed_position_tag 3
@@ -711,7 +712,9 @@ X(a, STATIC,   SINGULAR, UENUM,    rebroadcast_mode,   6) \
 X(a, STATIC,   SINGULAR, UINT32,   node_info_broadcast_secs,   7) \
 X(a, STATIC,   SINGULAR, BOOL,     double_tap_as_button_press,   8) \
 X(a, STATIC,   SINGULAR, BOOL,     is_managed,        9) \
-X(a, STATIC,   SINGULAR, BOOL,     disable_triple_click,  10)
+X(a, STATIC,   SINGULAR, BOOL,     disable_triple_click,  10) \
+X(a, STATIC,   SINGULAR, STRING,   tzdef,            11) \
+X(a, STATIC,   SINGULAR, BOOL,     led_heartbeat_disabled,  12)
 #define meshtastic_Config_DeviceConfig_CALLBACK NULL
 #define meshtastic_Config_DeviceConfig_DEFAULT NULL
 
@@ -828,8 +831,9 @@ extern const pb_msgdesc_t meshtastic_Config_BluetoothConfig_msg;
 #define meshtastic_Config_BluetoothConfig_fields &meshtastic_Config_BluetoothConfig_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_CONFIG_PB_H_MAX_SIZE meshtastic_Config_size
 #define meshtastic_Config_BluetoothConfig_size   10
-#define meshtastic_Config_DeviceConfig_size      32
+#define meshtastic_Config_DeviceConfig_size      100
 #define meshtastic_Config_DisplayConfig_size     28
 #define meshtastic_Config_LoRaConfig_size        80
 #define meshtastic_Config_NetworkConfig_IpV4Config_size 20

src/mesh/generated/meshtastic/connection_status.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/connection_status.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/connection_status.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CONNECTION_STATUS_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CONNECTION_STATUS_PB_H_INCLUDED
@@ -175,6 +175,7 @@ extern const pb_msgdesc_t meshtastic_SerialConnectionStatus_msg;
 #define meshtastic_SerialConnectionStatus_fields &meshtastic_SerialConnectionStatus_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_CONNECTION_STATUS_PB_H_MAX_SIZE meshtastic_DeviceConnectionStatus_size
 #define meshtastic_BluetoothConnectionStatus_size 19
 #define meshtastic_DeviceConnectionStatus_size   106
 #define meshtastic_EthernetConnectionStatus_size 13

src/mesh/generated/meshtastic/deviceonly.pb.cpp

@@ -1,18 +1,18 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/deviceonly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.
 #endif
 
-PB_BIND(meshtastic_DeviceState, meshtastic_DeviceState, 2)
+PB_BIND(meshtastic_PositionLite, meshtastic_PositionLite, AUTO)
 
 
 PB_BIND(meshtastic_NodeInfoLite, meshtastic_NodeInfoLite, AUTO)
 
 
-PB_BIND(meshtastic_PositionLite, meshtastic_PositionLite, AUTO)
+PB_BIND(meshtastic_DeviceState, meshtastic_DeviceState, 2)
 
 
 PB_BIND(meshtastic_ChannelFile, meshtastic_ChannelFile, 2)

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_INCLUDED
@@ -8,13 +8,25 @@
 #include "meshtastic/channel.pb.h"
 #include "meshtastic/localonly.pb.h"
 #include "meshtastic/mesh.pb.h"
-#include "meshtastic/telemetry.pb.h"
 #include "meshtastic/module_config.pb.h"
+#include "meshtastic/telemetry.pb.h"
 
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.
 #endif
 
+/* Enum definitions */
+/* Font sizes for the device screen */
+typedef enum _meshtastic_ScreenFonts {
+    /* TODO: REPLACE */
+    meshtastic_ScreenFonts_FONT_SMALL = 0,
+    /* TODO: REPLACE */
+    meshtastic_ScreenFonts_FONT_MEDIUM = 1,
+    /* TODO: REPLACE */
+    meshtastic_ScreenFonts_FONT_LARGE = 2
+} meshtastic_ScreenFonts;
+
+/* Struct definitions */
 /* Position with static location information only for NodeDBLite */
 typedef struct _meshtastic_PositionLite {
     /* The new preferred location encoding, multiply by 1e-7 to get degrees
@@ -63,18 +75,6 @@ typedef struct _meshtastic_NodeInfoLite {
     bool is_favorite;
 } meshtastic_NodeInfoLite;
 
-/* Enum definitions */
-/* TODO: REPLACE */
-typedef enum _meshtastic_ScreenFonts {
-    /* TODO: REPLACE */
-    meshtastic_ScreenFonts_FONT_SMALL = 0,
-    /* TODO: REPLACE */
-    meshtastic_ScreenFonts_FONT_MEDIUM = 1,
-    /* TODO: REPLACE */
-    meshtastic_ScreenFonts_FONT_LARGE = 2
-} meshtastic_ScreenFonts;
-
-/* Struct definitions */
 /* This message is never sent over the wire, but it is used for serializing DB
  state to flash in the device code
  FIXME, since we write this each time we enter deep sleep (and have infinite
@@ -117,7 +117,6 @@ typedef struct _meshtastic_DeviceState {
     std::vector<meshtastic_NodeInfoLite> node_db_lite;
 } meshtastic_DeviceState;
 
-
 /* The on-disk saved channels */
 typedef struct _meshtastic_ChannelFile {
     /* The channels our node knows about */
@@ -164,37 +163,27 @@ extern "C" {
 #define _meshtastic_ScreenFonts_MAX meshtastic_ScreenFonts_FONT_LARGE
 #define _meshtastic_ScreenFonts_ARRAYSIZE ((meshtastic_ScreenFonts)(meshtastic_ScreenFonts_FONT_LARGE+1))
 
-
-
 #define meshtastic_PositionLite_location_source_ENUMTYPE meshtastic_Position_LocSource
 
 
+
+
 #define meshtastic_OEMStore_oem_font_ENUMTYPE meshtastic_ScreenFonts
 
 
 /* Initializer values for message structs */
-#define meshtastic_DeviceState_init_default      {false, meshtastic_MyNodeInfo_init_default, false, meshtastic_User_init_default, 0, {meshtastic_MeshPacket_init_default}, false, meshtastic_MeshPacket_init_default, 0, 0, 0, false, meshtastic_MeshPacket_init_default, 0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}, {{NULL}, NULL}}
-#define meshtastic_NodeInfoLite_init_default     {0, false, meshtastic_User_init_default, false, meshtastic_PositionLite_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, 0, 0}
 #define meshtastic_PositionLite_init_default     {0, 0, 0, 0, _meshtastic_Position_LocSource_MIN}
+#define meshtastic_NodeInfoLite_init_default     {0, false, meshtastic_User_init_default, false, meshtastic_PositionLite_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, 0, 0}
+#define meshtastic_DeviceState_init_default      {false, meshtastic_MyNodeInfo_init_default, false, meshtastic_User_init_default, 0, {meshtastic_MeshPacket_init_default}, false, meshtastic_MeshPacket_init_default, 0, 0, 0, false, meshtastic_MeshPacket_init_default, 0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}, {0}}
 #define meshtastic_ChannelFile_init_default      {0, {meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default}, 0}
 #define meshtastic_OEMStore_init_default         {0, 0, {0, {0}}, _meshtastic_ScreenFonts_MIN, "", {0, {0}}, false, meshtastic_LocalConfig_init_default, false, meshtastic_LocalModuleConfig_init_default}
-#define meshtastic_DeviceState_init_zero         {false, meshtastic_MyNodeInfo_init_zero, false, meshtastic_User_init_zero, 0, {meshtastic_MeshPacket_init_zero}, false, meshtastic_MeshPacket_init_zero, 0, 0, 0, false, meshtastic_MeshPacket_init_zero, 0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}, {{NULL}, NULL}}
-#define meshtastic_NodeInfoLite_init_zero        {0, false, meshtastic_User_init_zero, false, meshtastic_PositionLite_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, 0, 0}
 #define meshtastic_PositionLite_init_zero        {0, 0, 0, 0, _meshtastic_Position_LocSource_MIN}
+#define meshtastic_NodeInfoLite_init_zero        {0, false, meshtastic_User_init_zero, false, meshtastic_PositionLite_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, 0, 0}
+#define meshtastic_DeviceState_init_zero         {false, meshtastic_MyNodeInfo_init_zero, false, meshtastic_User_init_zero, 0, {meshtastic_MeshPacket_init_zero}, false, meshtastic_MeshPacket_init_zero, 0, 0, 0, false, meshtastic_MeshPacket_init_zero, 0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}, {0}}
 #define meshtastic_ChannelFile_init_zero         {0, {meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero}, 0}
 #define meshtastic_OEMStore_init_zero            {0, 0, {0, {0}}, _meshtastic_ScreenFonts_MIN, "", {0, {0}}, false, meshtastic_LocalConfig_init_zero, false, meshtastic_LocalModuleConfig_init_zero}
 
 /* Field tags (for use in manual encoding/decoding) */
-#define meshtastic_DeviceState_my_node_tag       2
-#define meshtastic_DeviceState_owner_tag         3
-#define meshtastic_DeviceState_receive_queue_tag 5
-#define meshtastic_DeviceState_rx_text_message_tag 7
-#define meshtastic_DeviceState_version_tag       8
-#define meshtastic_DeviceState_no_save_tag       9
-#define meshtastic_DeviceState_did_gps_reset_tag 11
-#define meshtastic_DeviceState_rx_waypoint_tag   12
-#define meshtastic_DeviceState_node_remote_hardware_pins_tag 13
-#define meshtastic_DeviceState_node_db_lite_tag  14
 #define meshtastic_PositionLite_latitude_i_tag   1
 #define meshtastic_PositionLite_longitude_i_tag  2
 #define meshtastic_PositionLite_altitude_tag     3
@@ -210,6 +199,16 @@ extern "C" {
 #define meshtastic_NodeInfoLite_via_mqtt_tag     8
 #define meshtastic_NodeInfoLite_hops_away_tag    9
 #define meshtastic_NodeInfoLite_is_favorite_tag  10
+#define meshtastic_DeviceState_my_node_tag       2
+#define meshtastic_DeviceState_owner_tag         3
+#define meshtastic_DeviceState_receive_queue_tag 5
+#define meshtastic_DeviceState_rx_text_message_tag 7
+#define meshtastic_DeviceState_version_tag       8
+#define meshtastic_DeviceState_no_save_tag       9
+#define meshtastic_DeviceState_did_gps_reset_tag 11
+#define meshtastic_DeviceState_rx_waypoint_tag   12
+#define meshtastic_DeviceState_node_remote_hardware_pins_tag 13
+#define meshtastic_DeviceState_node_db_lite_tag  14
 #define meshtastic_ChannelFile_channels_tag      1
 #define meshtastic_ChannelFile_version_tag       2
 #define meshtastic_OEMStore_oem_icon_width_tag   1
@@ -222,6 +221,32 @@ extern "C" {
 #define meshtastic_OEMStore_oem_local_module_config_tag 8
 
 /* Struct field encoding specification for nanopb */
+#define meshtastic_PositionLite_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, SFIXED32, latitude_i,        1) \
+X(a, STATIC,   SINGULAR, SFIXED32, longitude_i,       2) \
+X(a, STATIC,   SINGULAR, INT32,    altitude,          3) \
+X(a, STATIC,   SINGULAR, FIXED32,  time,              4) \
+X(a, STATIC,   SINGULAR, UENUM,    location_source,   5)
+#define meshtastic_PositionLite_CALLBACK NULL
+#define meshtastic_PositionLite_DEFAULT NULL
+
+#define meshtastic_NodeInfoLite_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, UINT32,   num,               1) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  user,              2) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  position,          3) \
+X(a, STATIC,   SINGULAR, FLOAT,    snr,               4) \
+X(a, STATIC,   SINGULAR, FIXED32,  last_heard,        5) \
+X(a, STATIC,   OPTIONAL, MESSAGE,  device_metrics,    6) \
+X(a, STATIC,   SINGULAR, UINT32,   channel,           7) \
+X(a, STATIC,   SINGULAR, BOOL,     via_mqtt,          8) \
+X(a, STATIC,   SINGULAR, UINT32,   hops_away,         9) \
+X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10)
+#define meshtastic_NodeInfoLite_CALLBACK NULL
+#define meshtastic_NodeInfoLite_DEFAULT NULL
+#define meshtastic_NodeInfoLite_user_MSGTYPE meshtastic_User
+#define meshtastic_NodeInfoLite_position_MSGTYPE meshtastic_PositionLite
+#define meshtastic_NodeInfoLite_device_metrics_MSGTYPE meshtastic_DeviceMetrics
+
 #define meshtastic_DeviceState_FIELDLIST(X, a) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  my_node,           2) \
 X(a, STATIC,   OPTIONAL, MESSAGE,  owner,             3) \
@@ -244,32 +269,6 @@ extern bool meshtastic_DeviceState_callback(pb_istream_t *istream, pb_ostream_t
 #define meshtastic_DeviceState_node_remote_hardware_pins_MSGTYPE meshtastic_NodeRemoteHardwarePin
 #define meshtastic_DeviceState_node_db_lite_MSGTYPE meshtastic_NodeInfoLite
 
-#define meshtastic_NodeInfoLite_FIELDLIST(X, a) \
-X(a, STATIC,   SINGULAR, UINT32,   num,               1) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  user,              2) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  position,          3) \
-X(a, STATIC,   SINGULAR, FLOAT,    snr,               4) \
-X(a, STATIC,   SINGULAR, FIXED32,  last_heard,        5) \
-X(a, STATIC,   OPTIONAL, MESSAGE,  device_metrics,    6) \
-X(a, STATIC,   SINGULAR, UINT32,   channel,           7) \
-X(a, STATIC,   SINGULAR, BOOL,     via_mqtt,          8) \
-X(a, STATIC,   SINGULAR, UINT32,   hops_away,         9) \
-X(a, STATIC,   SINGULAR, BOOL,     is_favorite,      10)
-#define meshtastic_NodeInfoLite_CALLBACK NULL
-#define meshtastic_NodeInfoLite_DEFAULT NULL
-#define meshtastic_NodeInfoLite_user_MSGTYPE meshtastic_User
-#define meshtastic_NodeInfoLite_position_MSGTYPE meshtastic_PositionLite
-#define meshtastic_NodeInfoLite_device_metrics_MSGTYPE meshtastic_DeviceMetrics
-
-#define meshtastic_PositionLite_FIELDLIST(X, a) \
-X(a, STATIC,   SINGULAR, SFIXED32, latitude_i,        1) \
-X(a, STATIC,   SINGULAR, SFIXED32, longitude_i,       2) \
-X(a, STATIC,   SINGULAR, INT32,    altitude,          3) \
-X(a, STATIC,   SINGULAR, FIXED32,  time,              4) \
-X(a, STATIC,   SINGULAR, UENUM,    location_source,   5)
-#define meshtastic_PositionLite_CALLBACK NULL
-#define meshtastic_PositionLite_DEFAULT NULL
-
 #define meshtastic_ChannelFile_FIELDLIST(X, a) \
 X(a, STATIC,   REPEATED, MESSAGE,  channels,          1) \
 X(a, STATIC,   SINGULAR, UINT32,   version,           2)
@@ -291,24 +290,25 @@ X(a, STATIC,   OPTIONAL, MESSAGE,  oem_local_module_config,   8)
 #define meshtastic_OEMStore_oem_local_config_MSGTYPE meshtastic_LocalConfig
 #define meshtastic_OEMStore_oem_local_module_config_MSGTYPE meshtastic_LocalModuleConfig
 
-extern const pb_msgdesc_t meshtastic_DeviceState_msg;
-extern const pb_msgdesc_t meshtastic_NodeInfoLite_msg;
 extern const pb_msgdesc_t meshtastic_PositionLite_msg;
+extern const pb_msgdesc_t meshtastic_NodeInfoLite_msg;
+extern const pb_msgdesc_t meshtastic_DeviceState_msg;
 extern const pb_msgdesc_t meshtastic_ChannelFile_msg;
 extern const pb_msgdesc_t meshtastic_OEMStore_msg;
 
 /* Defines for backwards compatibility with code written before nanopb-0.4.0 */
-#define meshtastic_DeviceState_fields &meshtastic_DeviceState_msg
-#define meshtastic_NodeInfoLite_fields &meshtastic_NodeInfoLite_msg
 #define meshtastic_PositionLite_fields &meshtastic_PositionLite_msg
+#define meshtastic_NodeInfoLite_fields &meshtastic_NodeInfoLite_msg
+#define meshtastic_DeviceState_fields &meshtastic_DeviceState_msg
 #define meshtastic_ChannelFile_fields &meshtastic_ChannelFile_msg
 #define meshtastic_OEMStore_fields &meshtastic_OEMStore_msg
 
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_DeviceState_size depends on runtime parameters */
+#define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_OEMStore_size
 #define meshtastic_ChannelFile_size              702
-#define meshtastic_NodeInfoLite_size             160
-#define meshtastic_OEMStore_size                 3278
+#define meshtastic_NodeInfoLite_size             166
+#define meshtastic_OEMStore_size                 3346
 #define meshtastic_PositionLite_size             28
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/localonly.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/localonly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/localonly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_INCLUDED
@@ -180,7 +180,8 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 #define meshtastic_LocalModuleConfig_fields &meshtastic_LocalModuleConfig_msg
 
 /* Maximum encoded size of messages (where known) */
-#define meshtastic_LocalConfig_size              469
+#define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalModuleConfig_size
+#define meshtastic_LocalConfig_size              537
 #define meshtastic_LocalModuleConfig_size        663
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/mesh.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/mesh.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/mesh.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_MESH_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_MESH_PB_H_INCLUDED
@@ -141,6 +141,16 @@ typedef enum _meshtastic_HardwareModel {
     /* Heltec Wireless Tracker with ESP32-S3 CPU, built-in GPS, and TFT
  Older "V1.0" Variant */
     meshtastic_HardwareModel_HELTEC_WIRELESS_TRACKER_V1_0 = 58,
+    /* unPhone with ESP32-S3, TFT touchscreen,  LSM6DS3TR-C accelerometer and gyroscope */
+    meshtastic_HardwareModel_UNPHONE = 59,
+    /* Teledatics TD-LORAC NRF52840 based M.2 LoRA module
+ Compatible with the TD-WRLS development board */
+    meshtastic_HardwareModel_TD_LORAC = 60,
+    /* CDEBYTE EoRa-S3 board using their own MM modules, clone of LILYGO T3S3 */
+    meshtastic_HardwareModel_CDEBYTE_EORA_S3 = 61,
+    /* TWC_MESH_V4 
+ Adafruit NRF52840 feather express with SX1262, SSD1306 OLED and NEO6M GPS */
+    meshtastic_HardwareModel_TWC_MESH_V4 = 62,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -593,7 +603,7 @@ typedef struct _meshtastic_MeshPacket {
     meshtastic_MeshPacket_Delayed delayed;
     /* Describes whether this packet passed via MQTT somewhere along the path it currently took. */
     bool via_mqtt;
-    /* Hop limit with which the original packet started. Sent via LoRa using three bits in the unencrypted header. 
+    /* Hop limit with which the original packet started. Sent via LoRa using three bits in the unencrypted header.
  When receiving a packet, the difference between hop_start and hop_limit gives how many hops it traveled. */
     uint8_t hop_start;
 } meshtastic_MeshPacket;
@@ -1367,6 +1377,7 @@ extern const pb_msgdesc_t meshtastic_NodeRemoteHardwarePin_msg;
 #define meshtastic_NodeRemoteHardwarePin_fields &meshtastic_NodeRemoteHardwarePin_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_MESH_PB_H_MAX_SIZE meshtastic_FromRadio_size
 #define meshtastic_Compressed_size               243
 #define meshtastic_Data_size                     270
 #define meshtastic_DeviceMetadata_size           46
@@ -1378,7 +1389,7 @@ extern const pb_msgdesc_t meshtastic_NodeRemoteHardwarePin_msg;
 #define meshtastic_MyNodeInfo_size               18
 #define meshtastic_NeighborInfo_size             258
 #define meshtastic_Neighbor_size                 22
-#define meshtastic_NodeInfo_size                 277
+#define meshtastic_NodeInfo_size                 283
 #define meshtastic_NodeRemoteHardwarePin_size    29
 #define meshtastic_Position_size                 144
 #define meshtastic_QueueStatus_size              23

src/mesh/generated/meshtastic/module_config.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/module_config.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/module_config.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_MODULE_CONFIG_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_MODULE_CONFIG_PB_H_INCLUDED
@@ -827,6 +827,7 @@ extern const pb_msgdesc_t meshtastic_RemoteHardwarePin_msg;
 #define meshtastic_RemoteHardwarePin_fields &meshtastic_RemoteHardwarePin_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_MODULE_CONFIG_PB_H_MAX_SIZE meshtastic_ModuleConfig_size
 #define meshtastic_ModuleConfig_AmbientLightingConfig_size 14
 #define meshtastic_ModuleConfig_AudioConfig_size 19
 #define meshtastic_ModuleConfig_CannedMessageConfig_size 49

src/mesh/generated/meshtastic/mqtt.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/mqtt.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/mqtt.pb.h

@@ -1,11 +1,11 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_MQTT_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_MQTT_PB_H_INCLUDED
 #include <pb.h>
-#include "meshtastic/mesh.pb.h"
 #include "meshtastic/config.pb.h"
+#include "meshtastic/mesh.pb.h"
 
 #if PB_PROTO_HEADER_VERSION != 40
 #error Regenerate this file with the current version of nanopb generator.
@@ -120,6 +120,7 @@ extern const pb_msgdesc_t meshtastic_MapReport_msg;
 
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_ServiceEnvelope_size depends on runtime parameters */
+#define MESHTASTIC_MESHTASTIC_MQTT_PB_H_MAX_SIZE meshtastic_MapReport_size
 #define meshtastic_MapReport_size                108
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/paxcount.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/paxcount.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/paxcount.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_PAXCOUNT_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_PAXCOUNT_PB_H_INCLUDED
@@ -48,6 +48,7 @@ extern const pb_msgdesc_t meshtastic_Paxcount_msg;
 #define meshtastic_Paxcount_fields &meshtastic_Paxcount_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_PAXCOUNT_PB_H_MAX_SIZE meshtastic_Paxcount_size
 #define meshtastic_Paxcount_size                 18
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/portnums.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/portnums.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/portnums.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_PORTNUMS_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_PORTNUMS_PB_H_INCLUDED

src/mesh/generated/meshtastic/remote_hardware.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/remote_hardware.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/remote_hardware.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_REMOTE_HARDWARE_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_REMOTE_HARDWARE_PB_H_INCLUDED
@@ -84,6 +84,7 @@ extern const pb_msgdesc_t meshtastic_HardwareMessage_msg;
 #define meshtastic_HardwareMessage_fields &meshtastic_HardwareMessage_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_REMOTE_HARDWARE_PB_H_MAX_SIZE meshtastic_HardwareMessage_size
 #define meshtastic_HardwareMessage_size          24
 
 #ifdef __cplusplus

src/mesh/generated/meshtastic/rtttl.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #include "meshtastic/rtttl.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/rtttl.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.7 */
+/* Generated by nanopb-0.4.8 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_RTTTL_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_RTTTL_PB_H_INCLUDED
@@ -40,6 +40,7 @@ extern const pb_msgdesc_t meshtastic_RTTTLConfig_msg;
 #define meshtastic_RTTTLConfig_fields &meshtastic_RTTTLConfig_msg
 
 /* Maximum encoded size of messages (where known) */
+#define MESHTASTIC_MESHTASTIC_RTTTL_PB_H_MAX_SIZE meshtastic_RTTTLConfig_size
 #define meshtastic_RTTTLConfig_size              232
 
 #ifdef __cplusplus