add conffiles to .deb packaging (#3722)

* Add portduino Ebyte E22 XXXM30S/XXXM33S (sx1268) module support

* Add Ebyte E22 XXXM3XS module config

* Update comment for sx1268 module

* Address review comments

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -37,13 +37,19 @@ body:
         - T-Lora v1
         - T-Lora v1.3
         - T-Lora v2 1.6
+        - T-Deck
         - T-Echo
+        - T-Watch
         - Rak4631
         - Rak11200
+        - Rak11310
         - Heltec v1
         - Heltec v2
         - Heltec v2.1
         - Heltec V3
+        - Heltec Wireless Paper
+        - Heltec Wireless Tracker
+        - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - DIY

.github/actions/setup-base/action.yml

@@ -16,6 +16,19 @@ runs:
       run: |
         sudo apt-get install -y cppcheck
 
+    - name: Install libbluetooth
+      shell: bash
+      run: |
+        sudo apt-get install -y libbluetooth-dev
+    - name: Install libgpiod
+      shell: bash
+      run: |
+        sudo apt-get install -y libgpiod-dev
+    - name: Install libyaml-cpp
+      shell: bash
+      run: |
+        sudo apt-get install -y libyaml-cpp-dev
+
     - name: Setup Python
       uses: actions/setup-python@v4
       with:

.github/pull_request_template.md

@@ -7,7 +7,8 @@
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
-- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor and the 'clang-format' extension,
-  because automatically follows our indentation rules and it's auto reformatting will not cause spurious changes to lines.
+- We recommend using the [Visual Studio Code](https://platformio.org/install/ide?install=vscode) editor along with the ['Trunk Check' extension](https://marketplace.visualstudio.com/items?itemName=trunk.io) (In beta for windows, WSL2 for the linux version),
+  because it automatically follows our indentation rules and its auto reformatting will not cause spurious changes to lines.
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
+- Please also enable "Allow edits by maintainers".

.github/workflows/build_esp32.yml

@@ -17,11 +17,11 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Unpack web ui
@@ -35,16 +35,17 @@ jobs:
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware.bin"
-          target: "release/bleota.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string

.github/workflows/build_esp32_c3.yml

@@ -0,0 +1,62 @@
+name: Build ESP32-C3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-c3.bin
+          target: release/bleota-c3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -17,11 +17,11 @@ jobs:
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/web"
-          file: "build.tar"
-          target: "build.tar"
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Unpack web ui
@@ -34,15 +34,16 @@ jobs:
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
       - name: Build ESP32
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
         with:
-          repo: "meshtastic/firmware-ota"
-          file: "firmware-s3.bin"
-          target: "release/bleota-s3.bin"
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string

.github/workflows/build_raspbian.yml

@@ -0,0 +1,45 @@
+name: Build Raspbian
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    runs-on: [self-hosted, linux, ARM64]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v3
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          path: |
+            release/meshtasticd_linux_aarch64
+            bin/config-dist.yaml

.github/workflows/main_matrix.yml

@@ -1,4 +1,7 @@
 name: CI
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -29,10 +32,12 @@ jobs:
           - board: meshtastic-diy-v1
           - board: rak4631
           - board: t-echo
-          - board: station-g1
+          - board: station-g2
           - board: m5stack-coreink
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
+          - board: t-watch-s3
+          - board: t-deck
           #- board: rak11310
 
     runs-on: ubuntu-latest
@@ -44,7 +49,7 @@ jobs:
 
       - name: Trunk Check
         if: ${{ github.event_name != 'workflow_dispatch' }}
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
 
       - name: Check ${{ matrix.board }}
         run: bin/check-all.sh ${{ matrix.board }}
@@ -59,19 +64,21 @@ jobs:
           - board: tlora-v1
           - board: tlora_v1_3
           - board: tlora-v2-1-1_6
+          - board: tlora-v2-1-1_6-tcxo
           - board: tlora-v2-1-1_8
           - board: tbeam
-          - board: heltec-v1
           - board: heltec-v2_0
           - board: heltec-v2_1
           - board: tbeam0_7
           - board: meshtastic-diy-v1
+          - board: hydra
           - board: meshtastic-dr-dev
           - board: nano-g1
           - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
           - board: nano-g1-explorer
+          - board: chatter2
     uses: ./.github/workflows/build_esp32.yml
     with:
       board: ${{ matrix.board }}
@@ -83,23 +90,44 @@ jobs:
         include:
           - board: heltec-v3
           - board: heltec-wsl-v3
+          - board: heltec-wireless-tracker
+          - board: heltec-wireless-tracker-V1-0
+          - board: heltec-wireless-paper-v1_0
+          - board: heltec-wireless-paper #v1.1
           - board: tbeam-s3-core
           - board: tlora-t3s3-v1
+          - board: t-watch-s3
+          - board: t-deck
+          - board: picomputer-s3
+          - board: station-g2
+          - board: unphone
     uses: ./.github/workflows/build_esp32_s3.yml
     with:
       board: ${{ matrix.board }}
 
+  build-esp32-c3:
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - board: heltec-ht62-esp32c3-sx1262
+    uses: ./.github/workflows/build_esp32_c3.yml
+    with:
+      board: ${{ matrix.board }}
+
   build-nrf52:
     strategy:
       fail-fast: false
-      max-parallel: 2
       matrix:
         include:
           - board: rak4631
           - board: rak4631_eink
+          - board: monteops_hw1
           - board: t-echo
+          - board: canaryone
           - board: pca10059_diy_eink
           - board: feather_diy
+          - board: nano-g2-ultra
     uses: ./.github/workflows/build_nrf52.yml
     with:
       board: ${{ matrix.board }}
@@ -107,15 +135,26 @@ jobs:
   build-rpi2040:
     strategy:
       fail-fast: false
-      max-parallel: 2
       matrix:
         include:
           - board: pico
+          - board: picow
           - board: rak11310
+          - board: senselora_rp2040
+          - board: rp2040-lora
     uses: ./.github/workflows/build_rpi2040.yml
     with:
       board: ${{ matrix.board }}
 
+  build-raspbian:
+    strategy:
+      fail-fast: false
+      max-parallel: 1
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    uses: ./.github/workflows/package_raspbian.yml
+
   build-native:
     runs-on: ubuntu-latest
     steps:
@@ -150,12 +189,14 @@ jobs:
             release/device-*.bat
 
       - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/login-action@v2
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_TOKEN }}
 
       - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/setup-buildx-action@v2
 
       - name: Docker build and push tagged versions
@@ -168,7 +209,7 @@ jobs:
           tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
 
       - name: Docker build and push
-        if: github.ref == 'refs/heads/master'
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         uses: docker/build-push-action@v3
         with:
           context: .
@@ -187,9 +228,21 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
   gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
     runs-on: ubuntu-latest
     needs:
-      [build-esp32, build-esp32-s3, build-nrf52, build-native, build-rpi2040]
+      [
+        build-esp32,
+        build-esp32-s3,
+        build-esp32-c3,
+        build-nrf52,
+        build-raspbian,
+        build-native,
+        build-rpi2040,
+        package-raspbian,
+      ]
     steps:
       - name: Checkout code
         uses: actions/checkout@v3
@@ -201,12 +254,15 @@ jobs:
         with:
           path: ./
 
+      - name: Display structure of downloaded files
+        run: ls -R
+
       - name: Get release version string
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat
+        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./*esp32c3*/bleota-c3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase_v2.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat ./firmware-raspbian-*/release/meshtasticd_linux_aarch64 ./firmware-raspbian-*/bin/config-dist.yaml
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v3
@@ -218,6 +274,8 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
+            ./meshtasticd_linux_arm64
+            ./config-dist.yaml
           retention-days: 90
 
       - uses: actions/download-artifact@v3
@@ -245,15 +303,15 @@ jobs:
           retention-days: 30
 
       - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
         if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
-        uses: gavv/pull-request-artifacts@v1.0.0
+        uses: gavv/pull-request-artifacts@v2.1.0
         with:
           commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
           repo-token: ${{ secrets.GITHUB_TOKEN }}
           artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
           artifacts-repo: meshtastic/artifacts
           artifacts-branch: device
-          artifacts-dir: pr
           artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
 
   release-artifacts:
@@ -278,6 +336,13 @@ jobs:
           name: firmware-${{ steps.version.outputs.version }}
           path: ./output
 
+      - uses: actions/download-artifact@v3
+        with:
+          name: artifact-deb
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
       - name: Device scripts permissions
         run: |
           chmod +x ./output/device-install.sh
@@ -304,7 +369,7 @@ jobs:
         with:
           draft: true
           prerelease: true
-          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }}
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
           tag_name: v${{ steps.version.outputs.version }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
@@ -331,6 +396,16 @@ jobs:
           asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
           asset_content_type: application/zip
 
+      - name: Add raspbian .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
       - name: Bump version.properties
         run: >-
           bin/bump_version.py

.github/workflows/nightly.yml

@@ -14,6 +14,6 @@ jobs:
         uses: actions/checkout@v3
 
       - name: Trunk Check
-        uses: trunk-io/trunk-action@v1
+        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
         with:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}

.github/workflows/package_raspbian.yml

@@ -0,0 +1,75 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian:
+    uses: ./.github/workflows/build_raspbian.yml
+
+  package-raspbian:
+    runs-on: ubuntu-latest
+    needs: build-raspbian
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v3
+        with:
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/debian
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "etc/meshtasticd/config.yaml" > .debpkg/debian/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: arm64
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v3
+        with:
+          name: artifact-deb
+          path: |
+            ./*.deb

.github/workflows/trunk-check.yml

@@ -0,0 +1,22 @@
+name: Pull Request
+on: [pull_request]
+concurrency:
+  group: ${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+permissions: read-all
+
+jobs:
+  trunk_check:
+    name: Trunk Check Runner
+    runs-on: ubuntu-latest
+    permissions:
+      checks: write # For trunk to post annotations
+      contents: read # For repo checkout
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Trunk Check
+        uses: trunk-io/trunk-action@v1

.github/workflows/update_protobufs.yml

@@ -17,9 +17,9 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.7-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.7-linux-x86.tar.gz
-          mv nanopb-0.4.7-linux-x86 nanopb-0.4.7
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
 
       - name: Re-generate protocol buffers
         run: |

.gitignore

@@ -31,3 +31,5 @@ venv/
 release/
 .vscode/extensions.json
 /compile_commands.json
+src/mesh/raspihttp/certificate.pem
+src/mesh/raspihttp/private_key.pem

.trunk/.gitignore

@@ -2,7 +2,8 @@
 *logs
 *actions
 *notifications
+*tools
 plugins
 user_trunk.yaml
 user.yaml
-shims
+tmp

.trunk/configs/.shellcheckrc

@@ -1,7 +1,10 @@
 enable=all
 source-path=SCRIPTDIR
 disable=SC2154
+disable=SC2248
+disable=SC2250
 
 # If you're having issues with shellcheck following source, disable the errors via:
 # disable=SC1090
 # disable=SC1091
+# 

.trunk/configs/.yamllint.yaml

@@ -3,7 +3,7 @@ rules:
     required: only-when-needed
     extra-allowed: ["{|}"]
   empty-values:
-    forbid-in-block-mappings: true
+    forbid-in-block-mappings: false
     forbid-in-flow-mappings: true
   key-duplicates: {}
   octal-values:

.trunk/trunk.yaml

@@ -1,48 +1,45 @@
 version: 0.1
 cli:
-  version: 1.9.1
+  version: 1.20.1
 plugins:
   sources:
     - id: trunk
-      ref: v0.0.17
+      ref: v1.4.4
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - taplo@0.7.0
-    - ruff@0.0.265
-    - yamllint@1.31.0
-    - isort@5.12.0
-    - markdownlint@0.34.0
-    - oxipng@8.0.0
-    - svgo@3.0.2
-    - actionlint@1.6.24
-    - flake8@6.0.0
+    - trufflehog@3.68.5
+    - yamllint@1.35.1
+    - bandit@1.7.7
+    - checkov@3.2.32
+    - terrascan@1.19.1
+    - trivy@0.49.1
+    #- trufflehog@3.63.2-rc0
+    - taplo@0.8.1
+    - ruff@0.3.1
+    - isort@5.13.2
+    - markdownlint@0.39.0
+    - oxipng@9.0.0
+    - svgo@3.2.0
+    - actionlint@1.6.27
+    - flake8@7.0.0
     - hadolint@2.12.0
-    - shfmt@3.5.0
+    - shfmt@3.6.0
     - shellcheck@0.9.0
-    - black@23.3.0
+    - black@24.2.0
     - git-diff-check
-    - gitleaks@8.16.3
-    - clang-format@14.0.0
-    - prettier@2.8.8
-  disabled:
-    - taplo@0.7.0
-    - shellcheck@0.9.0
-    - shfmt@3.5.0
-    - oxipng@8.0.0
-    - actionlint@1.6.22
-    - markdownlint@0.34.0
-    - hadolint@2.12.0
-    - svgo@3.0.2
+    - gitleaks@8.18.2
+    - clang-format@16.0.3
+    - prettier@3.2.5
 runtimes:
   enabled:
     - python@3.10.8
-    - go@1.19.5
+    - go@1.21.0
     - node@18.12.1
 actions:
   disabled:
     - trunk-announce
-    - trunk-check-pre-push
-    - trunk-fmt-pre-commit
   enabled:
+    - trunk-fmt-pre-commit
+    - trunk-check-pre-push
     - trunk-upgrade-available

.vscode/settings.json

@@ -1,4 +1,7 @@
 {
   "editor.formatOnSave": true,
-  "editor.defaultFormatter": "trunk.io"
+  "editor.defaultFormatter": "trunk.io",
+  "trunk.enableWindows": true,
+  "files.insertFinalNewline": false,
+  "files.trimFinalNewlines": false
 }

Dockerfile

@@ -1,4 +1,4 @@
-FROM debian:bullseye-slim AS builder
+FROM debian:bookworm-slim AS builder
 
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -11,31 +11,45 @@ SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 
 # Install build deps
 USER root
-RUN apt-get update && \
-	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates
 
-# create a non-priveleged user & group
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
+                           ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
+                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
+
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
+USER mesh
+
+WORKDIR /tmp/firmware
+RUN python3 -m venv /tmp/firmware 
+RUN source ./bin/activate && pip3 install --no-cache-dir -U platformio==6.1.14
+# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
+COPY --chown=mesh:mesh . /tmp/firmware
+RUN source ./bin/activate && chmod +x /tmp/firmware/bin/build-native.sh && ./bin/build-native.sh
+RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+
+
+##### PRODUCTION BUILD #############
+
+FROM debian:bookworm-slim
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Etc/UTC
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/*
+
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
 USER mesh
-RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py -qO /tmp/get-platformio.py && \
-	chmod +x /tmp/get-platformio.py && \
-	python3 /tmp/get-platformio.py && \
-	git clone https://github.com/meshtastic/firmware --recurse-submodules /tmp/firmware && \
-	cd /tmp/firmware && \
-	chmod +x /tmp/firmware/bin/build-native.sh && \
-	source ~/.platformio/penv/bin/activate && \
-	./bin/build-native.sh
 
-FROM frolvlad/alpine-glibc
-
-RUN apk --update add --no-cache g++ shadow && \
-	groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
-COPY --from=builder /tmp/firmware/release/meshtasticd_linux_amd64 /home/mesh/
-
-USER mesh
 WORKDIR /home/mesh
-CMD sh -cx "./meshtasticd_linux_amd64 --hwid '$RANDOM'"
+COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/
+
+VOLUME /home/mesh/data
+
+CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]
 
 HEALTHCHECK NONE

README.md

@@ -10,8 +10,8 @@
 
 This repository contains the device firmware for the Meshtastic project.
 
-**[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
-**[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
+- **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
+- **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
 
 ## Stats
 

arch/esp32/esp32.ini

@@ -1,10 +1,10 @@
 ; Common settings for ESP targes, mixin with extends = esp32_base
 [esp32_base]
 extends = arduino_base
-platform = platformio/espressif32@^6.2.0
+platform = platformio/espressif32@6.3.2 # This is a temporary fix to the S3-based devices bluetooth issues until we can determine what within ESP-IDF changed and can develop a suitable patch. 
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -28,7 +28,12 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
   ;-DDEBUG_HEAP
 
 lib_deps =
@@ -36,8 +41,8 @@ lib_deps =
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.0
-  jgromes/RadioLib@^6.0.0
+  h2zero/NimBLE-Arduino@^1.4.1
+  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
 

arch/esp32/esp32s2.ini

@@ -2,15 +2,17 @@
 extends = esp32_base
 
 build_src_filter = 
-  ${esp32_base.build_src_filter} -<nimble/>
+ ${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
 
 monitor_speed = 115200
 
 build_flags =
   ${esp32_base.build_flags} 
   -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
   
 lib_ignore = 
   ${esp32_base.lib_ignore} 
   NimBLE-Arduino
-
+  libpax

arch/nrf52/nrf52.ini

@@ -1,20 +1,20 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^9.6.0
+platform = platformio/nordicnrf52@^10.4.0
 extends = arduino_base
 
 build_type = debug ; I'm debugging with ICE a lot now
 build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable 
+  ${arduino_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
+  -Wno-unused-variable
   -Isrc/platform/nrf52
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}
-  jgromes/RadioLib@^6.0.0
 
 lib_ignore =
   BluetoothOTA
-

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#096b3c3e9c5c8e19d4c3b6cd803fffef2a9be4c5
+platform = https://github.com/meshtastic/platform-native.git#659e49346aa33008b150dfb206b1817ddabc7132
 framework = arduino
 
 build_src_filter = 
@@ -10,7 +10,9 @@ build_src_filter =
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
   -<platform/rp2040>
+  -<mesh/wifi/>
   -<mesh/http/>
+  +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
   -<modules/Telemetry/EnvironmentTelemetry.cpp>
@@ -22,9 +24,14 @@ lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-  jgromes/RadioLib@^6.0.0
+  https://github.com/lovyan03/LovyanGFX.git#d35e60f269dfecbb18a8cb0fd07d594c2fb7e7a8
 
 build_flags =
   ${arduino_base.build_flags}
   -fPIC
   -Isrc/platform/portduino
+  -DRADIOLIB_EEPROM_UNSUPPORTED
+  -DPORTDUINO_LINUX_HARDWARE
+  -lbluetooth
+  -lgpiod
+  -lyaml-cpp

arch/rp2040/rp2040.ini

@@ -1,8 +1,8 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#0c33219f53faa035e188925ea1324f472e8b93d2
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.2.1
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -12,7 +12,7 @@ build_flags =
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mqtt/> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
 
 lib_ignore =
   BluetoothOTA
@@ -20,5 +20,4 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  jgromes/RadioLib@^6.0.0
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  rweather/Crypto

arch/stm32/stm32wl5e.ini

@@ -1,20 +1,28 @@
 [stm32wl5e_base]
-platform = platformio/ststm32@^15.4.1
+platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
+platform = ststm32
 board = generic_wl5e
 framework = arduino
 
 build_type = debug
+
 build_flags = 
   ${arduino_base.build_flags}
   -Isrc/platform/stm32wl -g
+  -DconfigUSE_CMSIS_RTOS_V2=1
+  -DVECT_TAB_OFFSET=0x08000000
   
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<mqtt/> -<graphics> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
 
 lib_deps =
   ${env.lib_deps}
-  jgromes/RadioLib@^6.0.0
   https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  https://github.com/littlefs-project/littlefs.git#v2.5.1
+  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
 
 lib_ignore =
-  https://github.com/mathertel/OneButton#2.1.0
+  mathertel/OneButton

bin/build-native.sh

@@ -2,8 +2,8 @@
 
 set -e
 
-VERSION=`bin/buildinfo.py long`
-SHORT_VERSION=`bin/buildinfo.py short`
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
 
 OUTDIR=release/
 
@@ -13,11 +13,8 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
-
+platformio pkg update --environment native
 pio run --environment native
-cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64
-
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR
-

bin/check-all.sh

@@ -4,7 +4,7 @@
 
 set -e
 
-VERSION=`bin/buildinfo.py long`
+VERSION=$(bin/buildinfo.py long)
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
@@ -13,7 +13,7 @@ if [[ $# -gt 0 ]]; then
 	# can override which environment by passing arg
 	BOARDS="$@"
 else
-    BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
+	BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo canaryone pca10059_diy_eink"
 fi
 
 echo "BOARDS:${BOARDS}"
@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=low --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/check-dependencies.sh

@@ -8,7 +8,7 @@ if [[ $# -gt 0 ]]; then
 	# can override which environment by passing arg
 	BOARDS="$@"
 else
-    BOARDS="rak4631 rak4631_eink t-echo pca10059_diy_eink pico rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink tbeam-s3-core"
+	BOARDS="rak4631 rak4631_eink t-echo canaryone pca10059_diy_eink pico rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink tbeam-s3-core"
 fi
 
 echo "BOARDS:${BOARDS}"

bin/config-dist.yaml

@@ -0,0 +1,142 @@
+### Define your devices here using Broadcom pin numbering
+### Uncomment the block that corresponds to your hardware
+### Including the "Module:" line!
+---
+Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
+#  CS: 7
+#  IRQ: 17
+#  Reset: 22
+
+#  Module: sx1262  # pinedio
+#  CS: 0
+#  IRQ: 10
+#  Busy: 11
+#  spidev: spidev0.1
+
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23
+
+#  Module: RF95  # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html
+#  Reset: 22
+#  CS: 7
+#  IRQ: 25
+
+#  Module: sx1280  # SX1280
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+
+#  Module: sx1268  # SX1268-based modules, tested with Ebyte E22 400M33S
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+#  TXen: 6
+#  RXen: 12
+#  DIO3_TCXO_VOLTAGE: true
+
+#  DIO3_TCXO_VOLTAGE: true  # the Waveshare Core1262 and others are known to need this setting
+
+#  TXen: x  # TX and RX enable pins
+#  RXen: x
+
+### Set gpio chip to use in /dev/. Defaults to 0.
+### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
+#  gpiochip: 4
+
+### Specify the SPI device to use in /dev/. Defaults to spidev0.0
+### Some devices, like the pinedio, may require spidev0.1 as a workaround.
+#  spidev: spidev0.0
+
+### Define GPIO buttons here:
+
+GPIO:
+#  User: 6
+
+### Define GPS
+
+GPS:
+#  SerialPath: /dev/ttyS0
+
+### Specify I2C device, or leave blank for none
+
+I2C:
+#  I2CDevice: /dev/i2c-1
+
+### Set up SPI displays here. Note that I2C displays are generally auto-detected.
+
+Display:
+
+### Waveshare 2.8inch RPi LCD
+#  Panel: ST7789
+#  CS: 8
+#  DC: 22        # Data/Command pin
+#  Backlight: 18
+#  Width: 240
+#  Height: 320
+#  Reset: 27
+#  Rotate: true
+#  Invert: true
+
+### Waveshare 1.44inch LCD HAT
+#  Panel: ST7735S
+#  CS: 8         #Chip Select
+#  DC: 25        # Data/Command pin
+#  Backlight: 24
+#  Width: 128
+#  Height: 128
+#  Reset: 27
+#  OffsetX: 0
+#  OffsetY: 0
+
+### Adafruit PiTFT 2.8 TFT+Touchscreen
+#  Panel: ILI9341
+#  CS: 8
+#  DC: 25
+#  Width: 240
+#  Height: 320
+#  Rotate: true
+
+Touchscreen:
+### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
+
+#  Module: STMPE610 # Option 1 for Adafruit PiTFT 2.8
+#  CS: 7
+#  IRQ: 24
+
+#  Module: FT5x06 # Option 2 for Adafruit PiTFT 2.8
+#  IRQ: 24
+#  I2CAddr: 0x38
+
+#  Module: XPT2046 # Waveshare 2.8inch
+#  CS: 7
+#  IRQ: 17
+
+### Configure device for direct keyboard input
+
+Input:
+#  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
+
+###
+
+Logging:
+  LogLevel: info # debug, info, warn, error
+
+Webserver:
+#  Port: 443 # Port for Webserver & Webservices
+#  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
+
+General:
+  MaxNodes: 200

bin/device-install.bat

@@ -31,9 +31,13 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
 	%PYTHON% -m esptool --baud 115200 erase_flash
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
     
-    @REM Account for S3 board's different OTA partition
-    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% (
+    @REM Account for S3 and C3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
+        IF x%FILENAME:esp32c3=%==x%FILENAME% (
             %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+        ) else (
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
+        )
 	) else (
         %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
     )

bin/device-install.sh

@@ -18,18 +18,20 @@ Flash image file to device, but first erasing and writing system information"
 EOF
 }
 
-
 while getopts ":hp:P:f:" opt; do
 	case "${opt}" in
 	h)
 		show_help
 		exit 0
 		;;
-        p)  export ESPTOOL_PORT=${OPTARG}
+	p)
+		export ESPTOOL_PORT=${OPTARG}
 		;;
-        P)  PYTHON=${OPTARG}
+	P)
+		PYTHON=${OPTARG}
 		;;
-        f)  FILENAME=${OPTARG}
+	f)
+		FILENAME=${OPTARG}
 		;;
 	*)
 		echo "Invalid flag."
@@ -45,13 +47,17 @@ shift "$((OPTIND-1))"
 	shift
 }
 
-if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
+if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	"$PYTHON" -m esptool erase_flash
 	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
-	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ]; then
+	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
+		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
 			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
+		else
+			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
+		fi
 	else
 		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
 	fi

bin/exception_decoder.py

@@ -11,19 +11,22 @@ Meshtastic notes:
 * version that's checked into meshtastic repo is based on: https://github.com/me21/EspArduinoExceptionDecoder
   which adds in ESP32 Backtrace decoding.
 * this also updates the defaults to use ESP32, instead of ESP8266 and defaults to the built firmware.bin
+* also updated the toolchain name, which will be set according to the platform
 
 To use, copy the "Backtrace: 0x...." line to a file, e.g., backtrace.txt, then run:
 $ bin/exception_decoder.py backtrace.txt
+For a platform other than ESP32, use the -p option, e.g.:
+$ bin/exception_decoder.py -p ESP32S3 backtrace.txt
+To specify a specific .elf file, use the -e option, e.g.:
+$ bin/exception_decoder.py -e firmware.elf backtrace.txt
 """
 
 import argparse
+import os
 import re
 import subprocess
-from collections import namedtuple
-
 import sys
-
-import os
+from collections import namedtuple
 
 EXCEPTIONS = [
     "Illegal instruction",
@@ -55,24 +58,39 @@ EXCEPTIONS = [
     "LoadStorePrivilege: A load or store referenced a virtual address at a ring level less than CRING",
     "reserved",
     "LoadProhibited: A load referenced a page mapped with an attribute that does not permit loads",
-    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores"
+    "StoreProhibited: A store referenced a page mapped with an attribute that does not permit stores",
 ]
 
 PLATFORMS = {
-    "ESP8266": "lx106",
-    "ESP32": "esp32"
+    "ESP8266": "xtensa-lx106",
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
+}
+TOOLS = {
+    "ESP8266": "xtensa",
+    "ESP32": "xtensa-esp32",
+    "ESP32S3": "xtensa-esp32s3",
+    "ESP32C3": "riscv32-esp",
 }
 
-BACKTRACE_REGEX = re.compile(r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b")
+BACKTRACE_REGEX = re.compile(
+    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
+)
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
-COUNTER_REGEX = re.compile('^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) '
-                           'excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$')
+COUNTER_REGEX = re.compile(
+    "^epc1=(?P<epc1>0x[0-9a-f]+) epc2=(?P<epc2>0x[0-9a-f]+) epc3=(?P<epc3>0x[0-9a-f]+) "
+    "excvaddr=(?P<excvaddr>0x[0-9a-f]+) depc=(?P<depc>0x[0-9a-f]+)$"
+)
 CTX_REGEX = re.compile("^ctx: (?P<ctx>.+)$")
-POINTER_REGEX = re.compile('^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$')
-STACK_BEGIN = '>>>stack>>>'
-STACK_END = '<<<stack<<<'
+POINTER_REGEX = re.compile(
+    "^sp: (?P<sp>[0-9a-f]+) end: (?P<end>[0-9a-f]+) offset: (?P<offset>[0-9a-f]+)$"
+)
+STACK_BEGIN = ">>>stack>>>"
+STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    '^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$')
+    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+)
 
 StackLine = namedtuple("StackLine", ["offset", "content"])
 
@@ -96,15 +114,18 @@ class ExceptionDataParser(object):
         self.stack = []
 
     def _parse_backtrace(self, line):
-        if line.startswith('Backtrace:'):
-            self.stack = [StackLine(offset=0, content=(addr,)) for addr in BACKTRACE_REGEX.findall(line)]
+        if line.startswith("Backtrace:"):
+            self.stack = [
+                StackLine(offset=0, content=(addr,))
+                for addr in BACKTRACE_REGEX.findall(line)
+            ]
             return None
         return self._parse_backtrace
 
     def _parse_exception(self, line):
         match = EXCEPTION_REGEX.match(line)
         if match is not None:
-            self.exception = int(match.group('exc'))
+            self.exception = int(match.group("exc"))
             return self._parse_counters
         return self._parse_exception
 
@@ -144,14 +165,22 @@ class ExceptionDataParser(object):
         if line != STACK_END:
             match = STACK_REGEX.match(line)
             if match is not None:
-                self.stack.append(StackLine(offset=match.group("off"),
-                                            content=(match.group("c1"), match.group("c2"), match.group("c3"),
-                                                     match.group("c4"))))
+                self.stack.append(
+                    StackLine(
+                        offset=match.group("off"),
+                        content=(
+                            match.group("c1"),
+                            match.group("c2"),
+                            match.group("c3"),
+                            match.group("c4"),
+                        ),
+                    )
+                )
             return self._parse_stack_line
         return None
 
     def parse_file(self, file, platform, stack_only=False):
-        if platform == 'ESP32':
+        if platform != "ESP8266":
             func = self._parse_backtrace
         else:
             func = self._parse_exception
@@ -175,7 +204,9 @@ class AddressResolver(object):
         self._address_map = {}
 
     def _lookup(self, addresses):
-        cmd = [self._tool, "-aipfC", "-e", self._elf] + [addr for addr in addresses if addr is not None]
+        cmd = [self._tool, "-aipfC", "-e", self._elf] + [
+            addr for addr in addresses if addr is not None
+        ]
 
         if sys.version_info[0] < 3:
             output = subprocess.check_output(cmd)
@@ -190,19 +221,27 @@ class AddressResolver(object):
             match = line_regex.match(line)
 
             if match is None:
-                if last is not None and line.startswith('(inlined by)'):
+                if last is not None and line.startswith("(inlined by)"):
                     line = line[12:].strip()
-                    self._address_map[last] += ("\n  \-> inlined by: " + line)
+                    self._address_map[last] += "\n  \-> inlined by: " + line
                 continue
 
-            if match.group("result") == '?? ??:0':
+            if match.group("result") == "?? ??:0":
                 continue
 
             self._address_map[match.group("addr")] = match.group("result")
             last = match.group("addr")
 
     def fill(self, parser):
-        addresses = [parser.epc1, parser.epc2, parser.epc3, parser.excvaddr, parser.sp, parser.end, parser.offset]
+        addresses = [
+            parser.epc1,
+            parser.epc2,
+            parser.epc3,
+            parser.excvaddr,
+            parser.sp,
+            parser.end,
+            parser.offset,
+        ]
         for line in parser.stack:
             addresses.extend(line.content)
 
@@ -257,8 +296,10 @@ def print_stack(lines, resolver):
 
 
 def print_result(parser, resolver, platform, full=True, stack_only=False):
-    if platform == 'ESP8266' and not stack_only:
-        print('Exception: {} ({})'.format(parser.exception, EXCEPTIONS[parser.exception]))
+    if platform == "ESP8266" and not stack_only:
+        print(
+            "Exception: {} ({})".format(parser.exception, EXCEPTIONS[parser.exception])
+        )
 
         print("")
         print_addr("epc1", parser.epc1, resolver)
@@ -285,15 +326,33 @@ def print_result(parser, resolver, platform, full=True, stack_only=False):
 def parse_args():
     parser = argparse.ArgumentParser(description="decode ESP Stacktraces.")
 
-    parser.add_argument("-p", "--platform", help="The platform to decode from", choices=PLATFORMS.keys(),
-                        default="ESP32")
-    parser.add_argument("-t", "--tool", help="Path to the xtensa toolchain",
-                        default="~/.platformio/packages/toolchain-xtensa32/")
-    parser.add_argument("-e", "--elf", help="path to elf file",
-                        default=".pio/build/esp32/firmware.elf")
-    parser.add_argument("-f", "--full", help="Print full stack dump", action="store_true")
-    parser.add_argument("-s", "--stack_only", help="Decode only a stractrace", action="store_true")
-    parser.add_argument("file", help="The file to read the exception data from ('-' for STDIN)", default="-")
+    parser.add_argument(
+        "-p",
+        "--platform",
+        help="The platform to decode from",
+        choices=PLATFORMS.keys(),
+        default="ESP32",
+    )
+    parser.add_argument(
+        "-t",
+        "--tool",
+        help="Path to the toolchain (without specific platform)",
+        default="~/.platformio/packages/toolchain-",
+    )
+    parser.add_argument(
+        "-e", "--elf", help="path to elf file", default=".pio/build/tbeam/firmware.elf"
+    )
+    parser.add_argument(
+        "-f", "--full", help="Print full stack dump", action="store_true"
+    )
+    parser.add_argument(
+        "-s", "--stack_only", help="Decode only a stractrace", action="store_true"
+    )
+    parser.add_argument(
+        "file",
+        help="The file to read the exception data from ('-' for STDIN)",
+        default="-",
+    )
 
     return parser.parse_args()
 
@@ -309,10 +368,12 @@ if __name__ == "__main__":
             sys.exit(1)
         file = open(args.file, "r")
 
-    addr2line = os.path.join(os.path.abspath(os.path.expanduser(args.tool)),
-                             "bin/xtensa-" + PLATFORMS[args.platform] + "-elf-addr2line")
-    if os.name == 'nt':
-        addr2line += '.exe'
+    addr2line = os.path.join(
+        os.path.abspath(os.path.expanduser(args.tool + TOOLS[args.platform])),
+        "bin/" + PLATFORMS[args.platform] + "-elf-addr2line",
+    )
+    if os.name == "nt":
+        addr2line += ".exe"
     if not os.path.exists(addr2line):
         print("ERROR: addr2line not found (" + addr2line + ")")
 

bin/meshtasticd.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Meshtastic Native Daemon
+After=network-online.target
+
+[Service]
+User=root
+Group=root
+Type=simple
+ExecStart=/usr/sbin/meshtasticd
+
+[Install]
+WantedBy=multi-user.target

bin/native-install.sh

@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
+mkdir /etc/meshtasticd
+if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
+	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
+else
+	cp bin/config-dist.yaml /etc/meshtasticd/config.yaml
+fi
+cp bin/meshtasticd.service /usr/lib/systemd/system/meshtasticd.service

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --experimental_allow_proto3_optional --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,19 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.7 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.7"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated/ -I=../protobufs meshtastic/*.proto --experimental_allow_proto3_optional
-
-# cd ../src/mesh/generated/meshtastic
-# sed -i 's/#include "meshtastic/#include "./g' -- *
-
-# sed -i 's/meshtastic_//g' -- *
-
-#echo "Regenerating protobuf documentation - if you see an error message"
-#echo "you can ignore it unless doing a new protobuf release to github."
-#bin/regen-docs.sh
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

boards/CDEBYTE_EoRa-S3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D CDEBYTE_EORA_S3",
+      "-D ARDUINO_USB_CDC_ON_BOOT=1",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1",
+      "-D BOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "CDEBYTE_EoRa-S3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "CDEBYTE EoRa-S3",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.cdebyte.com/Module-Testkits-EoRaPI",
+  "vendor": "CDEBYTE"
+}

boards/ESP32-S3-WROOM-1-N4.json

@@ -0,0 +1,39 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D ARDUINO_USB_CDC_ON_BOOT=0",
+      "-D ARDUINO_USB_MSC_ON_BOOT=0",
+      "-D ARDUINO_USB_DFU_ON_BOOT=0",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "ESP32-S3-WROOM-1-N4"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-WROOM-1-N4 (4 MB Flash, No PSRAM)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 524288,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
+  "vendor": "Espressif"
+}

boards/bpi_picow_esp32_s3.json

@@ -28,8 +28,6 @@
     "flash_size": "8MB",
     "maximum_ram_size": 327680,
     "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
     "require_upload_port": true,
     "speed": 921600
   },

boards/canaryone.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_CANARY -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x009F"]
+    ],
+    "usb_product": "CanaryOne",
+    "mcu": "nrf52840",
+    "variant": "canaryone",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Canary (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://canaryradio.io/",
+  "vendor": "Canary Radio Company"
+}

boards/eink0.1.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "TTGO eink (Adafruit BSP)",

boards/esp32-s3-pico.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Waveshare ESP32-S3-Pico (16 MB FLASH, 2 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.waveshare.com/esp32-s3-pico.htm",
+  "vendor": "Waveshare"
+}

boards/generic_wl5e.json

@@ -20,7 +20,7 @@
     "maximum_ram_size": 65536,
     "maximum_size": 262144,
     "protocol": "cmsis-dap",
-    "protocols": ["cmsis-dap"]
+    "protocols": ["cmsis-dap", "stlink"]
   },
   "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32wl-series.html",
   "vendor": "ST"

boards/heltec_wireless_tracker.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DHELTEC_WIRELESS_TRACKER",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "heltec_wireless_tracker"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Wireless Tracker",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/wireless-tracker/",
+  "vendor": "Heltec"
+}

boards/lora-relay-v1.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",

boards/lora-relay-v2.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",

boards/lora_isp4520.json

@@ -22,7 +22,8 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd"
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "lora ISP4520",

boards/nano-g2-ultra.json

@@ -0,0 +1,51 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "BQ nRF52840",
+    "mcu": "nrf52840",
+    "variant": "nano-g2-ultra",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "BQ nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra",
+  "vendor": "BQ Consulting"
+}

boards/nordic_pca10059.json

@@ -32,7 +32,8 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "nRF52840 Dongle",

boards/nrf52840_dk.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "A modified NRF52840-DK devboard (Adafruit BSP)",

boards/nrf52840_dk_modified.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "A modified NRF52840-DK devboard (Adafruit BSP)",

boards/ppr.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Meshtastic PPR (Adafruit BSP)",

boards/ppr1.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52833_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52833.svd"
+    "svd_path": "nrf52833.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Meshtastic PPR1 (Adafruit BSP)",

boards/station-g2.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "station-g2"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "BQ Station G2",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/station-g2",
+  "vendor": "BQ Consulting"
+}

boards/t-deck.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "t-deck"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Espressif Systems LilyGO T-Deck (16 MB FLASH, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-deck",
+  "vendor": "LilyGO"
+}

boards/t-echo.json

@@ -7,7 +7,11 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4405"]],
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
     "usb_product": "TTGO_eink",
     "mcu": "nrf52840",
     "variant": "t-echo",
@@ -29,7 +33,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "TTGO eink (Adafruit BSP)",

boards/t-watch-s3.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DT_WATCH_S3",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "t-watch-s3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "LilyGo T-Watch 2020 V3",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.lilygo.cc/en-pl/products/t-watch-s3",
+  "vendor": "LilyGo"
+}

boards/tbeam-s3-core.json

@@ -7,15 +7,14 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DLILYGO_TBEAM_S3_CORE",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "dio",
-    "hwids": [["0X303A", "0x1001"]],
+    "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "tbeam-s3-core"
   },

boards/wiscore_rak4600.json

@@ -32,7 +32,8 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd"
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino", "zephyr"],
   "name": "Adafruit Bluefruit nRF52832 Feather",

boards/wiscore_rak4631.json

@@ -32,7 +32,8 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "WisCore RAK4631 Board",

boards/xiao_ble_sense.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x810B"],
+      ["0x239A", "0x010B"],
+      ["0x239A", "0x810C"]
+    ],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_XIAO_nRF52840_Sense",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Xiao BLE Sense",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}

platformio.ini

@@ -9,13 +9,17 @@ default_envs = tbeam
 ;default_envs = heltec-v1
 ;default_envs = heltec-v2_0
 ;default_envs = heltec-v2_1
+;default_envs = heltec-wireless-tracker
+;default_envs = chatter2
 ;default_envs = tlora-v1
 ;default_envs = tlora_v1_3
 ;default_envs = tlora-v2
 ;default_envs = tlora-v2-1-1_6
+;default_envs = tlora-v2-1-1_6-tcxo
 ;default_envs = tlora-t3s3-v1
 ;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
+;default_envs = canaryone
 ;default_envs = nrf52840dk-geeksville
 ;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 ;default_envs = nano-g1
@@ -25,6 +29,8 @@ default_envs = tbeam
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
+;default_envs = rak10701
+;default_envs = wio-e5
 
 extra_configs =
   arch/*/*.ini
@@ -48,22 +54,32 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_NRF24
   -DRADIOLIB_EXCLUDE_RF69
   -DRADIOLIB_EXCLUDE_SX1231
+  -DRADIOLIB_EXCLUDE_SX1233
   -DRADIOLIB_EXCLUDE_SI443X
   -DRADIOLIB_EXCLUDE_RFM2X
   -DRADIOLIB_EXCLUDE_AFSK
+  -DRADIOLIB_EXCLUDE_BELL
   -DRADIOLIB_EXCLUDE_HELLSCHREIBER
   -DRADIOLIB_EXCLUDE_MORSE
   -DRADIOLIB_EXCLUDE_RTTY
   -DRADIOLIB_EXCLUDE_SSTV
+  -DRADIOLIB_EXCLUDE_AX25
+  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
+  -DRADIOLIB_EXCLUDE_BELL
+  -DRADIOLIB_EXCLUDE_PAGER
+  -DRADIOLIB_EXCLUDE_FSK4
+  -DRADIOLIB_EXCLUDE_APRS
+  -DRADIOLIB_EXCLUDE_LORAWAN
 
 monitor_speed = 115200
 
 lib_deps =
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#b38094e03dfa964fbc0e799bc374e91a605c1223 ; ESP8266_SSD1306
-  https://github.com/mathertel/OneButton#2.1.0 ; OneButton library for non-blocking button debounce
+  jgromes/RadioLib@~6.5.0
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#ee628ee6c9588d4c56c9e3da35f0fc9448ad54a8 ; ESP8266_SSD1306
+  mathertel/OneButton@^2.5.0 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#127ad674ef85f0201cb68a065879653ed94792c4
-  https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
+  https://github.com/meshtastic/TinyGPSPlus.git#964f75a72cccd6b53cd74e4add1f7a42c6f7344d
+  https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
   nanopb/Nanopb@^0.4.7
   erriez/ErriezCRC32@^1.0.1
 
@@ -80,11 +96,11 @@ check_flags =
 framework = arduino
 lib_deps =
   ${env.lib_deps}
-  mprograms/QMC5883LCompass@^1.1.1
+  mprograms/QMC5883LCompass@^1.2.0
   end2endzone/NonBlockingRTTTL@^1.3.0
   https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
 
-build_flags = ${env.build_flags} -Os -DRADIOLIB_SPI_PARANOID=0
+build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT
@@ -98,18 +114,22 @@ lib_deps =
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-  adafruit/Adafruit BusIO@^1.11.4
-  adafruit/Adafruit Unified Sensor@^1.1.9
-  adafruit/Adafruit BMP280 Library@^2.6.6
+  adafruit/Adafruit BusIO@^1.15.0
+  adafruit/Adafruit Unified Sensor@^1.1.11
+  adafruit/Adafruit BMP280 Library@^2.6.8
+  adafruit/Adafruit BMP085 Library@^1.2.4
   adafruit/Adafruit BME280 Library@^2.2.2
   https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.5.2400
   boschsensortec/BME68x Sensor Library@^1.1.40407
   adafruit/Adafruit MCP9808 Library@^2.0.0
+  https://github.com/KodinLanewave/INA3221@^1.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
   adafruit/Adafruit SHTC3 Library@^1.0.0
   adafruit/Adafruit LPS2X@^2.0.4
-  adafruit/Adafruit SHT31 Library@^2.2.0
+  adafruit/Adafruit SHT31 Library@^2.2.2
   adafruit/Adafruit PM25 AQI Sensor@^1.0.6
   adafruit/Adafruit MPU6050@^2.2.4
   adafruit/Adafruit LIS3DH@^1.2.4
+  https://github.com/lewisxhe/SensorLib#27fd0f721e20cd09e1f81383f0ba58a54fe84a17
+  adafruit/Adafruit LSM6DS@^4.7.2

src/AccelerometerThread.h

@@ -5,17 +5,45 @@
 #include "power.h"
 
 #include <Adafruit_LIS3DH.h>
+#include <Adafruit_LSM6DS3TRC.h>
 #include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <SensorBMA423.hpp>
+#include <Wire.h>
+
+SensorBMA423 bmaSensor;
+bool BMA_IRQ = false;
 
 #define ACCELEROMETER_CHECK_INTERVAL_MS 100
 #define ACCELEROMETER_CLICK_THRESHOLD 40
 
+int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
 namespace concurrency
 {
 class AccelerometerThread : public concurrency::OSThread
 {
   public:
-    AccelerometerThread(ScanI2C::DeviceType type = ScanI2C::DeviceType::NONE) : OSThread("AccelerometerThread")
+    explicit AccelerometerThread(ScanI2C::DeviceType type) : OSThread("AccelerometerThread")
     {
         if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
             LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
@@ -29,10 +57,10 @@ class AccelerometerThread : public concurrency::OSThread
             return;
         }
 
-        accleremoter_type = type;
+        acceleremoter_type = type;
         LOG_DEBUG("AccelerometerThread initializing\n");
 
-        if (accleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
             LOG_DEBUG("MPU6050 initializing\n");
             // setup motion detection
             mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
@@ -40,11 +68,56 @@ class AccelerometerThread : public concurrency::OSThread
             mpu.setMotionDetectionDuration(20);
             mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
             mpu.setInterruptPinPolarity(true);
-        } else if (accleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
             LOG_DEBUG("LIS3DH initializing\n");
             lis.setRange(LIS3DH_RANGE_2_G);
-            // Adjust threshhold, higher numbers are less sensitive
+            // Adjust threshold, higher numbers are less sensitive
             lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 &&
+                   bmaSensor.begin(accelerometer_found.address, &readRegister, &writeRegister)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            bmaSensor.configAccelerometer(bmaSensor.RANGE_2G, bmaSensor.ODR_100HZ, bmaSensor.BW_NORMAL_AVG4,
+                                          bmaSensor.PERF_CONTINUOUS_MODE);
+            bmaSensor.enableAccelerometer();
+            bmaSensor.configInterrupt(BMA4_LEVEL_TRIGGER, BMA4_ACTIVE_HIGH, BMA4_PUSH_PULL, BMA4_OUTPUT_ENABLE,
+                                      BMA4_INPUT_DISABLE);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+#ifdef T_WATCH_S3
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setReampAxes(bmaSensor.REMAP_TOP_LAYER_RIGHT_CORNER);
+#else
+            bmaSensor.setReampAxes(bmaSensor.REMAP_BOTTOM_LAYER_BOTTOM_LEFT_CORNER);
+#endif
+            // bmaSensor.enableFeature(bmaSensor.FEATURE_STEP_CNTR, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_TILT, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_WAKEUP, true);
+            // bmaSensor.resetPedometer();
+
+            // Turn on feature interrupt
+            bmaSensor.enablePedometerIRQ();
+            bmaSensor.enableTiltIRQ();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupIRQ();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.begin_I2C(accelerometer_found.address)) {
+            LOG_DEBUG("LSM6DS3 initializing\n");
+            // Default threshold of 2G, less sensitive options are 4, 8 or 16G
+            lsm.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
+#ifndef LSM6DS3_WAKE_THRESH
+#define LSM6DS3_WAKE_THRESH 20
+#endif
+            lsm.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
+            // Duration is number of occurances needed to trigger, higher threshold is less sensitive
         }
     }
 
@@ -53,9 +126,9 @@ class AccelerometerThread : public concurrency::OSThread
     {
         canSleep = true; // Assume we should not keep the board awake
 
-        if (accleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
             wakeScreen();
-        } else if (accleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
             uint8_t click = lis.getClick();
             if (!config.device.double_tap_as_button_press) {
                 wakeScreen();
@@ -65,7 +138,16 @@ class AccelerometerThread : public concurrency::OSThread
                 buttonPress();
                 return 500;
             }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.readIrqStatus() != DEV_WIRE_NONE) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleTap()) {
+                wakeScreen();
+                return 500;
             }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.shake()) {
+            wakeScreen();
+            return 500;
+        }
+
         return ACCELEROMETER_CHECK_INTERVAL_MS;
     }
 
@@ -84,9 +166,10 @@ class AccelerometerThread : public concurrency::OSThread
         powerFSM.trigger(EVENT_PRESS);
     }
 
-    ScanI2C::DeviceType accleremoter_type;
+    ScanI2C::DeviceType acceleremoter_type;
     Adafruit_MPU6050 mpu;
     Adafruit_LIS3DH lis;
+    Adafruit_LSM6DS3TRC lsm;
 };
 
 } // namespace concurrency

src/AmbientLightingThread.h

@@ -0,0 +1,129 @@
+#include "configuration.h"
+
+#ifdef HAS_NCP5623
+#include <graphics/RAKled.h>
+NCP5623 rgb;
+#endif
+
+#ifdef HAS_NEOPIXEL
+#include <graphics/NeoPixel.h>
+Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
+#endif
+
+#ifdef UNPHONE
+#include "unPhone.h"
+extern unPhone unphone;
+#endif
+
+namespace concurrency
+{
+class AmbientLightingThread : public concurrency::OSThread
+{
+  public:
+    explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
+    {
+        // Uncomment to test module
+        // moduleConfig.ambient_lighting.led_state = true;
+        // moduleConfig.ambient_lighting.current = 10;
+        // // Default to a color based on our node number
+        // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
+        // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
+        // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
+
+#ifdef HAS_NCP5623
+        _type = type;
+        if (_type == ScanI2C::DeviceType::NONE) {
+            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus\n");
+            disable();
+            return;
+        }
+#endif
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+        if (!moduleConfig.ambient_lighting.led_state) {
+            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
+            disable();
+            return;
+        }
+        LOG_DEBUG("AmbientLightingThread initializing\n");
+#ifdef HAS_NCP5623
+        if (_type == ScanI2C::NCP5623) {
+            rgb.begin();
+#endif
+#ifdef RGBLED_RED
+            pinMode(RGBLED_RED, OUTPUT);
+            pinMode(RGBLED_GREEN, OUTPUT);
+            pinMode(RGBLED_BLUE, OUTPUT);
+#endif
+#ifdef HAS_NEOPIXEL
+            pixels.begin(); // Initialise the pixel(s)
+            pixels.clear(); // Set all pixel colors to 'off'
+            pixels.setBrightness(moduleConfig.ambient_lighting.current);
+#endif
+            setLighting();
+#endif
+#ifdef HAS_NCP5623
+        }
+#endif
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef HAS_NCP5623
+        if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+#endif
+            setLighting();
+            return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
+#ifdef HAS_NCP5623
+        }
+#endif
+#endif
+        return disable();
+    }
+
+  private:
+    ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
+
+    void setLighting()
+    {
+#ifdef HAS_NCP5623
+        rgb.setCurrent(moduleConfig.ambient_lighting.current);
+        rgb.setRed(moduleConfig.ambient_lighting.red);
+        rgb.setGreen(moduleConfig.ambient_lighting.green);
+        rgb.setBlue(moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef HAS_NEOPIXEL
+        pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                 moduleConfig.ambient_lighting.blue),
+                    0, NEOPIXEL_COUNT);
+        pixels.show();
+        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef RGBLED_CA
+        analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#elif defined(RGBLED_RED)
+        analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef UNPHONE
+        unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d\n", moduleConfig.ambient_lighting.red,
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#endif
+    }
+};
+
+} // namespace concurrency

src/AudioThread.h

@@ -0,0 +1,77 @@
+#pragma once
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "configuration.h"
+#include "main.h"
+#include "sleep.h"
+
+#ifdef HAS_I2S
+#include <AudioFileSourcePROGMEM.h>
+#include <AudioGeneratorRTTTL.h>
+#include <AudioOutputI2S.h>
+#include <ESP8266SAM.h>
+
+#define AUDIO_THREAD_INTERVAL_MS 100
+
+class AudioThread : public concurrency::OSThread
+{
+  public:
+    AudioThread() : OSThread("AudioThread") { initOutput(); }
+
+    void beginRttl(const void *data, uint32_t len)
+    {
+        setCPUFast(true);
+        rtttlFile = new AudioFileSourcePROGMEM(data, len);
+        i2sRtttl = new AudioGeneratorRTTTL();
+        i2sRtttl->begin(rtttlFile, audioOut);
+    }
+
+    bool isPlaying()
+    {
+        if (i2sRtttl != nullptr) {
+            return i2sRtttl->isRunning() && i2sRtttl->loop();
+        }
+        return false;
+    }
+
+    void stop()
+    {
+        if (i2sRtttl != nullptr) {
+            i2sRtttl->stop();
+            delete i2sRtttl;
+            i2sRtttl = nullptr;
+        }
+        if (rtttlFile != nullptr) {
+            delete rtttlFile;
+            rtttlFile = nullptr;
+        }
+
+        setCPUFast(false);
+    }
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        // if (i2sRtttl != nullptr && i2sRtttl->isRunning()) {
+        //     i2sRtttl->loop();
+        // }
+        return AUDIO_THREAD_INTERVAL_MS;
+    }
+
+  private:
+    void initOutput()
+    {
+        audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S);
+        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT);
+        audioOut->SetGain(0.2);
+    };
+
+    AudioGeneratorRTTTL *i2sRtttl = nullptr;
+    AudioOutputI2S *audioOut;
+
+    AudioFileSourcePROGMEM *rtttlFile;
+};
+
+#endif

src/ButtonThread.cpp

@@ -0,0 +1,317 @@
+#include "ButtonThread.h"
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_GPS
+#include "GPS.h"
+#endif
+#include "MeshService.h"
+#include "PowerFSM.h"
+#include "RadioLibInterface.h"
+#include "buzz.h"
+#include "main.h"
+#include "modules/ExternalNotificationModule.h"
+#include "power.h"
+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
+#define DEBUG_BUTTONS 0
+#if DEBUG_BUTTONS
+#define LOG_BUTTON(...) LOG_DEBUG(__VA_ARGS__)
+#else
+#define LOG_BUTTON(...)
+#endif
+
+using namespace concurrency;
+
+ButtonThread *buttonThread; // Declared extern in header
+volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+OneButton ButtonThread::userButton; // Get reference to static member
+#endif
+
+ButtonThread::ButtonThread() : OSThread("Button")
+{
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
+        this->userButton = OneButton(settingsMap[user], true, true);
+        LOG_DEBUG("Using GPIO%02d for button\n", settingsMap[user]);
+    }
+#elif defined(BUTTON_PIN)
+    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
+    this->userButton = OneButton(pin, true, true);
+    LOG_DEBUG("Using GPIO%02d for button\n", pin);
+#endif
+
+#ifdef INPUT_PULLUP_SENSE
+    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
+    pinMode(pin, INPUT_PULLUP_SENSE);
+#endif
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+    userButton.attachClick(userButtonPressed);
+    userButton.setClickMs(250);
+    userButton.setPressMs(c_longPressTime);
+    userButton.setDebounceMs(1);
+    userButton.attachDoubleClick(userButtonDoublePressed);
+    userButton.attachMultiClick(userButtonMultiPressed, this); // Reference to instance: get click count from non-static OneButton
+#ifndef T_DECK // T-Deck immediately wakes up after shutdown, so disable this function
+    userButton.attachLongPressStart(userButtonPressedLongStart);
+    userButton.attachLongPressStop(userButtonPressedLongStop);
+#endif
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
+#ifdef INPUT_PULLUP_SENSE
+    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
+    pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
+#endif
+    userButtonAlt.attachClick(userButtonPressed);
+    userButtonAlt.setClickMs(250);
+    userButtonAlt.setPressMs(c_longPressTime);
+    userButtonAlt.setDebounceMs(1);
+    userButtonAlt.attachDoubleClick(userButtonDoublePressed);
+    userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
+    userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
+    userButtonTouch.setPressMs(400);
+    userButtonTouch.attachLongPressStart(touchPressedLongStart); // Better handling with longpress than click?
+#endif
+
+    attachButtonInterrupts();
+#endif
+}
+
+int32_t ButtonThread::runOnce()
+{
+    // If the button is pressed we suppress CPU sleep until release
+    canSleep = true; // Assume we should not keep the board awake
+
+#if defined(BUTTON_PIN)
+    userButton.tick();
+    canSleep &= userButton.isIdle();
+#elif defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
+        userButton.tick();
+        canSleep &= userButton.isIdle();
+    }
+#endif
+#ifdef BUTTON_PIN_ALT
+    userButtonAlt.tick();
+    canSleep &= userButtonAlt.isIdle();
+#endif
+#ifdef BUTTON_PIN_TOUCH
+    userButtonTouch.tick();
+    canSleep &= userButtonTouch.isIdle();
+#endif
+
+    if (btnEvent != BUTTON_EVENT_NONE) {
+        switch (btnEvent) {
+        case BUTTON_EVENT_PRESSED: {
+            LOG_BUTTON("press!\n");
+#ifdef BUTTON_PIN
+            if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+                 moduleConfig.canned_message.inputbroker_pin_press) ||
+                !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
+            }
+#endif
+#if defined(ARCH_PORTDUINO)
+            if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
+                    (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
+            }
+#endif
+            break;
+        }
+
+        case BUTTON_EVENT_DOUBLE_PRESSED: {
+            LOG_BUTTON("Double press!\n");
+            service.refreshLocalMeshNode();
+            service.sendNetworkPing(NODENUM_BROADCAST, true);
+            if (screen) {
+                screen->print("Sent ad-hoc ping\n");
+                screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+            }
+            break;
+        }
+
+        case BUTTON_EVENT_MULTI_PRESSED: {
+            LOG_BUTTON("Mulitipress! %hux\n", multipressClickCount);
+            switch (multipressClickCount) {
+#if HAS_GPS
+            // 3 clicks: toggle GPS
+            case 3:
+                if (!config.device.disable_triple_click && (gps != nullptr)) {
+                    gps->toggleGpsMode();
+                    if (screen)
+                        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+                }
+                break;
+#endif
+#if defined(USE_EINK) && defined(PIN_EINK_EN) // i.e. T-Echo
+            // 4 clicks: toggle backlight
+            case 4:
+                digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
+                break;
+#endif
+            // No valid multipress action
+            default:
+                break;
+            } // end switch: click count
+
+            break;
+        } // end multipress event
+
+        case BUTTON_EVENT_LONG_PRESSED: {
+            LOG_BUTTON("Long press!\n");
+            powerFSM.trigger(EVENT_PRESS);
+            if (screen)
+                screen->startShutdownScreen();
+            playBeep();
+            break;
+        }
+
+        // Do actual shutdown when button released, otherwise the button release
+        // may wake the board immediatedly.
+        case BUTTON_EVENT_LONG_RELEASED: {
+            LOG_INFO("Shutdown from long press\n");
+            playShutdownMelody();
+            delay(3000);
+            power->shutdown();
+            break;
+        }
+
+#ifdef BUTTON_PIN_TOUCH
+        case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
+            LOG_BUTTON("Touch press!\n");
+            if (config.display.wake_on_tap_or_motion) {
+                if (screen) {
+                    // Wake if asleep
+                    if (powerFSM.getState() == &stateDARK)
+                        powerFSM.trigger(EVENT_PRESS);
+
+                    // Update display (legacy behaviour)
+                    screen->forceDisplay();
+                }
+            }
+            break;
+        }
+#endif // BUTTON_PIN_TOUCH
+
+        default:
+            break;
+        }
+        btnEvent = BUTTON_EVENT_NONE;
+    }
+
+    return 50;
+}
+
+/*
+ * Attach (or re-attach) hardware interrupts for buttons
+ * Public method. Used outside class when waking from MCU sleep
+ */
+void ButtonThread::attachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        wakeOnIrq(settingsMap[user], FALLING);
+#elif defined(BUTTON_PIN)
+    // Interrupt for user button, during normal use. Improves responsiveness.
+    attachInterrupt(
+        config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
+        []() {
+            BaseType_t higherWake = 0;
+            mainDelay.interruptFromISR(&higherWake);
+            ButtonThread::userButton.tick();
+        },
+        CHANGE);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    wakeOnIrq(BUTTON_PIN_ALT, FALLING);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
+#endif
+}
+
+/*
+ * Detach the "normal" button interrupts.
+ * Public method. Used before attaching a "wake-on-button" interrupt for MCU sleep
+ */
+void ButtonThread::detachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        detachInterrupt(settingsMap[user]);
+#elif defined(BUTTON_PIN)
+    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    detachInterrupt(BUTTON_PIN_ALT);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    detachInterrupt(BUTTON_PIN_TOUCH);
+#endif
+}
+
+/**
+ * Watch a GPIO and if we get an IRQ, wake the main thread.
+ * Use to add wake on button press
+ */
+void ButtonThread::wakeOnIrq(int irq, int mode)
+{
+    attachInterrupt(
+        irq,
+        [] {
+            BaseType_t higherWake = 0;
+            mainDelay.interruptFromISR(&higherWake);
+        },
+        FALLING);
+}
+
+// Static callback
+void ButtonThread::userButtonMultiPressed(void *callerThread)
+{
+    // Grab click count from non-static button, while the info is still valid
+    ButtonThread *thread = (ButtonThread *)callerThread;
+    thread->storeClickCount();
+
+    // Then handle later, in the usual way
+    btnEvent = BUTTON_EVENT_MULTI_PRESSED;
+}
+
+// Non-static method, runs during callback. Grabs info while still valid
+void ButtonThread::storeClickCount()
+{
+#ifdef BUTTON_PIN
+    multipressClickCount = userButton.getNumberClicks();
+#endif
+}
+
+void ButtonThread::userButtonPressedLongStart()
+{
+    if (millis() > c_holdOffTime) {
+        btnEvent = BUTTON_EVENT_LONG_PRESSED;
+    }
+}
+
+void ButtonThread::userButtonPressedLongStop()
+{
+    if (millis() > c_holdOffTime) {
+        btnEvent = BUTTON_EVENT_LONG_RELEASED;
+    }
+}

src/ButtonThread.h

@@ -1,34 +1,34 @@
-#include "PowerFSM.h"
-#include "RadioLibInterface.h"
-#include "buzz.h"
+#pragma once
+
+#include "OneButton.h"
 #include "concurrency/OSThread.h"
 #include "configuration.h"
-#include "graphics/Screen.h"
-#include "power.h"
-#include <OneButton.h>
-
-namespace concurrency
-{
-/**
- * Watch a GPIO and if we get an IRQ, wake the main thread.
- * Use to add wake on button press
- */
-void wakeOnIrq(int irq, int mode)
-{
-    attachInterrupt(
-        irq,
-        [] {
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-        },
-        FALLING);
-}
 
 class ButtonThread : public concurrency::OSThread
 {
-// Prepare for button presses
-#ifdef BUTTON_PIN
-    OneButton userButton;
+  public:
+    static const uint32_t c_longPressTime = 5000; // shutdown after 5s
+    static const uint32_t c_holdOffTime = 30000;  // hold off 30s after boot
+
+    enum ButtonEventType {
+        BUTTON_EVENT_NONE,
+        BUTTON_EVENT_PRESSED,
+        BUTTON_EVENT_DOUBLE_PRESSED,
+        BUTTON_EVENT_MULTI_PRESSED,
+        BUTTON_EVENT_LONG_PRESSED,
+        BUTTON_EVENT_LONG_RELEASED,
+        BUTTON_EVENT_TOUCH_LONG_PRESSED,
+    };
+
+    ButtonThread();
+    int32_t runOnce() override;
+    void attachButtonInterrupts();
+    void detachButtonInterrupts();
+    void storeClickCount();
+
+  private:
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+    static OneButton userButton; // Static - accessed from an interrupt
 #endif
 #ifdef BUTTON_PIN_ALT
     OneButton userButtonAlt;
@@ -36,164 +36,22 @@ class ButtonThread : public concurrency::OSThread
 #ifdef BUTTON_PIN_TOUCH
     OneButton userButtonTouch;
 #endif
-    static bool shutdown_on_long_stop;
 
-  public:
-    static uint32_t longPressTime;
+    // set during IRQ
+    static volatile ButtonEventType btnEvent;
 
-    // callback returns the period for the next callback invocation (or 0 if we should no longer be called)
-    ButtonThread() : OSThread("Button")
-    {
-#ifdef BUTTON_PIN
-        userButton = OneButton(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, true, true);
-#ifdef INPUT_PULLUP_SENSE
-        // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP_SENSE);
-#endif
-        userButton.attachClick(userButtonPressed);
-        userButton.setClickMs(300);
-        userButton.attachDuringLongPress(userButtonPressedLong);
-        userButton.attachDoubleClick(userButtonDoublePressed);
-        userButton.attachMultiClick(userButtonMultiPressed);
-        userButton.attachLongPressStart(userButtonPressedLongStart);
-        userButton.attachLongPressStop(userButtonPressedLongStop);
-        wakeOnIrq(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, FALLING);
-#endif
-#ifdef BUTTON_PIN_ALT
-        userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
-#ifdef INPUT_PULLUP_SENSE
-        // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
-#endif
-        userButtonAlt.attachClick(userButtonPressed);
-        userButtonAlt.attachDuringLongPress(userButtonPressedLong);
-        userButtonAlt.attachDoubleClick(userButtonDoublePressed);
-        userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
-        userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
-        wakeOnIrq(BUTTON_PIN_ALT, FALLING);
-#endif
+    // Store click count during callback, for later use
+    volatile int multipressClickCount = 0;
 
-#ifdef BUTTON_PIN_TOUCH
-        userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
-        userButtonTouch.attachClick(touchPressed);
-        wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
-#endif
-    }
+    static void wakeOnIrq(int irq, int mode);
 
-  protected:
-    /// If the button is pressed we suppress CPU sleep until release
-    int32_t runOnce() override
-    {
-        canSleep = true; // Assume we should not keep the board awake
-
-#ifdef BUTTON_PIN
-        userButton.tick();
-        canSleep &= userButton.isIdle();
-#endif
-#ifdef BUTTON_PIN_ALT
-        userButtonAlt.tick();
-        canSleep &= userButtonAlt.isIdle();
-#endif
-#ifdef BUTTON_PIN_TOUCH
-        userButtonTouch.tick();
-        canSleep &= userButtonTouch.isIdle();
-#endif
-        // if (!canSleep) LOG_DEBUG("Supressing sleep!\n");
-        // else LOG_DEBUG("sleep ok\n");
-
-        return 5;
-    }
-
-  private:
-    static void touchPressed()
-    {
-        screen->forceDisplay();
-        LOG_DEBUG("touch press!\n");
-    }
-
-    static void userButtonPressed()
-    {
-        // LOG_DEBUG("press!\n");
-#ifdef BUTTON_PIN
-        if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
-             moduleConfig.canned_message.inputbroker_pin_press) ||
-            !moduleConfig.canned_message.enabled) {
-            powerFSM.trigger(EVENT_PRESS);
-        }
-#endif
-    }
-    static void userButtonPressedLong()
-    {
-        // LOG_DEBUG("Long press!\n");
-        // If user button is held down for 5 seconds, shutdown the device.
-        if ((millis() - longPressTime > 5000) && (longPressTime > 0)) {
-#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
-            // Do actual shutdown when button released, otherwise the button release
-            // may wake the board immediatedly.
-            if ((!shutdown_on_long_stop) && (millis() > 30 * 1000)) {
-                screen->startShutdownScreen();
-                LOG_INFO("Shutdown from long press");
-                playBeep();
-#ifdef PIN_LED1
-                ledOff(PIN_LED1);
-#endif
-#ifdef PIN_LED2
-                ledOff(PIN_LED2);
-#endif
-#ifdef PIN_LED3
-                ledOff(PIN_LED3);
-#endif
-                shutdown_on_long_stop = true;
-            }
-#endif
-        } else {
-            // LOG_DEBUG("Long press %u\n", (millis() - longPressTime));
-        }
-    }
-
-    static void userButtonDoublePressed()
-    {
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
-        digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-#endif
-        screen->print("Sent ad-hoc ping\n");
-        service.refreshMyNodeInfo();
-        service.sendNetworkPing(NODENUM_BROADCAST, true);
-    }
-
-    static void userButtonMultiPressed()
-    {
-#if defined(GPS_POWER_TOGGLE)
-        if (config.position.gps_enabled) {
-            LOG_DEBUG("Flag set to false for gps power\n");
-        } else {
-            LOG_DEBUG("Flag set to true to restore power\n");
-        }
-        config.position.gps_enabled = !(config.position.gps_enabled);
-        doGPSpowersave(config.position.gps_enabled);
-#endif
-    }
-
-    static void userButtonPressedLongStart()
-    {
-        if (millis() > 30 * 1000) {
-            LOG_DEBUG("Long press start!\n");
-            longPressTime = millis();
-        }
-    }
-
-    static void userButtonPressedLongStop()
-    {
-        if (millis() > 30 * 1000) {
-            LOG_DEBUG("Long press stop!\n");
-            longPressTime = 0;
-            if (shutdown_on_long_stop) {
-                playShutdownMelody();
-                delay(3000);
-                power->shutdown();
-            }
-        }
-    }
+    // IRQ callbacks
+    static void userButtonPressed() { btnEvent = BUTTON_EVENT_PRESSED; }
+    static void userButtonDoublePressed() { btnEvent = BUTTON_EVENT_DOUBLE_PRESSED; }
+    static void userButtonMultiPressed(void *callerThread); // Retrieve click count from non-static Onebutton while still valid
+    static void userButtonPressedLongStart();
+    static void userButtonPressedLongStop();
+    static void touchPressedLongStart() { btnEvent = BUTTON_EVENT_TOUCH_LONG_PRESSED; }
 };
 
-} // namespace concurrency
+extern ButtonThread *buttonThread;

src/DebugConfiguration.h

@@ -28,7 +28,7 @@
 #define DEBUG_PORT (*console) // Serial debug port
 
 #ifdef USE_SEGGER
-#define DEBUG_PORT
+// #undef DEBUG_PORT
 #define LOG_DEBUG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_INFO(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_WARN(...) SEGGER_RTT_printf(0, __VA_ARGS__)

src/DisplayFormatters.cpp

@@ -0,0 +1,34 @@
+#include "DisplayFormatters.h"
+
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
+{
+    switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+        return useShortName ? "ShortS" : "ShortSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+        return useShortName ? "ShortF" : "ShortFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+        return useShortName ? "MedS" : "MediumSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+        return useShortName ? "MedF" : "MediumFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+        return useShortName ? "LongS" : "LongSlow";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST:
+        return useShortName ? "LongF" : "LongFast";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+        return useShortName ? "LongM" : "LongMod";
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
+        return useShortName ? "VeryL" : "VLongSlow";
+        break;
+    default:
+        return useShortName ? "Custom" : "Invalid";
+        break;
+    }
+}

src/DisplayFormatters.h

@@ -0,0 +1,8 @@
+#pragma once
+#include "NodeDB.h"
+
+class DisplayFormatters
+{
+  public:
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
+};

src/FSCommon.cpp

@@ -1,3 +1,13 @@
+/**
+ * @file FSCommon.cpp
+ * @brief This file contains functions for common filesystem operations such as copying, renaming, listing and deleting files and
+ * directories.
+ *
+ * The functions in this file are used to perform common filesystem operations such as copying, renaming, listing and deleting
+ * files and directories. These functions are used in the Meshtastic-device project to manage files and directories on the
+ * device's filesystem.
+ *
+ */
 #include "FSCommon.h"
 #include "configuration.h"
 
@@ -8,10 +18,19 @@
 #ifdef SDCARD_USE_SPI1
 SPIClass SPI1(HSPI);
 #define SDHandler SPI1
+#else
+#define SDHandler SPI
 #endif
 
 #endif // HAS_SDCARD
 
+/**
+ * @brief Copies a file from one location to another.
+ *
+ * @param from The path of the source file.
+ * @param to The path of the destination file.
+ * @return true if the file was successfully copied, false otherwise.
+ */
 bool copyFile(const char *from, const char *to)
 {
 #ifdef FSCom
@@ -41,6 +60,14 @@ bool copyFile(const char *from, const char *to)
 #endif
 }
 
+/**
+ * Renames a file from pathFrom to pathTo.
+ *
+ * @param pathFrom The original path of the file.
+ * @param pathTo The new path of the file.
+ *
+ * @return True if the file was successfully renamed, false otherwise.
+ */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
 #ifdef FSCom
@@ -57,7 +84,14 @@ bool renameFile(const char *pathFrom, const char *pathTo)
 #endif
 }
 
-void listDir(const char *dirname, uint8_t levels, boolean del = false)
+/**
+ * Lists the contents of a directory.
+ *
+ * @param dirname The name of the directory to list.
+ * @param levels The number of levels of subdirectories to list.
+ * @param del Whether or not to delete the contents of the directory after listing.
+ */
+void listDir(const char *dirname, uint8_t levels, bool del = false)
 {
 #ifdef FSCom
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
@@ -152,6 +186,13 @@ void listDir(const char *dirname, uint8_t levels, boolean del = false)
 #endif
 }
 
+/**
+ * @brief Removes a directory and all its contents.
+ *
+ * This function recursively removes a directory and all its contents, including subdirectories and files.
+ *
+ * @param dirname The name of the directory to remove.
+ */
 void rmDir(const char *dirname)
 {
 #ifdef FSCom
@@ -180,6 +221,9 @@ void fsInit()
 #endif
 }
 
+/**
+ * Initializes the SD card and mounts the file system.
+ */
 void setupSDCard()
 {
 #ifdef HAS_SDCARD

src/FSCommon.h

@@ -13,6 +13,13 @@
 #define FILE_O_READ "r"
 #endif
 
+#if defined(ARCH_STM32WL)
+#include "platform/stm32wl/InternalFileSystem.h" // STM32WL version
+#define FSCom InternalFS
+#define FSBegin() FSCom.begin()
+using namespace LittleFS_Namespace;
+#endif
+
 #if defined(ARCH_RP2040)
 // RP2040
 #include "LittleFS.h"
@@ -42,6 +49,6 @@ using namespace Adafruit_LittleFS_Namespace;
 void fsInit();
 bool copyFile(const char *from, const char *to);
 bool renameFile(const char *pathFrom, const char *pathTo);
-void listDir(const char *dirname, uint8_t levels, boolean del);
+void listDir(const char *dirname, uint8_t levels, bool del);
 void rmDir(const char *dirname);
 void setupSDCard();

src/GPSStatus.h

@@ -4,8 +4,6 @@
 #include "configuration.h"
 #include <Arduino.h>
 
-extern NodeDB nodeDB;
-
 namespace meshtastic
 {
 
@@ -55,7 +53,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed latitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.latitude_i;
         } else {
             return p.latitude_i;
@@ -68,7 +66,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed longitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.longitude_i;
         } else {
             return p.longitude_i;
@@ -81,32 +79,23 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed altitude\n");
 #endif
-            meshtastic_NodeInfo *node = nodeDB.getNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.altitude;
         } else {
             return p.altitude;
         }
     }
 
-    uint32_t getDOP() const
-    {
-        return p.PDOP;
-    }
+    uint32_t getDOP() const { return p.PDOP; }
 
-    uint32_t getHeading() const
-    {
-        return p.ground_track;
-    }
+    uint32_t getHeading() const { return p.ground_track; }
 
-    uint32_t getNumSatellites() const
-    {
-        return p.sats_in_view;
-    }
+    uint32_t getNumSatellites() const { return p.sats_in_view; }
 
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.pos_timestamp, p.pos_timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
         return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                 newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||

src/OSTimer.cpp

@@ -5,7 +5,8 @@
  * Schedule a callback to run.  The callback must _not_ block, though it is called from regular thread level (not ISR)
  *
  * NOTE! xTimerPend... seems to ignore the time passed in on ESP32 and on NRF52
- * The reason this didn't work is bcause xTimerPednFunctCall really isn't a timer function at all - it just means run the callback
+ * The reason this didn't work is because xTimerPednFunctCall really isn't a timer function at all - it just means run the
+callback
  * from the timer thread the next time you have spare cycles.
  *
  * @return true if successful, false if the timer fifo is too full.
@@ -28,6 +29,16 @@ static void IRAM_ATTR onTimer()
     (*tCallback)(tParam1, tParam2);
 }
 
+/**
+ * Schedules a hardware callback function to be executed after a specified delay.
+ *
+ * @param callback The function to be executed.
+ * @param param1 The first parameter to be passed to the function.
+ * @param param2 The second parameter to be passed to the function.
+ * @param delayMsec The delay time in milliseconds before the function is executed.
+ *
+ * @return True if the function was successfully scheduled, false otherwise.
+ */
 bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
 {
     if (!timer) {

src/Observer.h

@@ -10,12 +10,12 @@ template <class T> class Observable;
  */
 template <class T> class Observer
 {
-    std::list<Observable<T> *> observed;
+    std::list<Observable<T> *> observables;
 
   public:
     virtual ~Observer();
 
-    /// Stop watching the obserable
+    /// Stop watching the observable
     void unobserve(Observable<T> *o);
 
     /// Start watching a specified observable
@@ -86,21 +86,21 @@ template <class T> class Observable
 
 template <class T> Observer<T>::~Observer()
 {
-    for (typename std::list<Observable<T> *>::const_iterator iterator = observed.begin(); iterator != observed.end();
+    for (typename std::list<Observable<T> *>::const_iterator iterator = observables.begin(); iterator != observables.end();
          ++iterator) {
         (*iterator)->removeObserver(this);
     }
-    observed.clear();
+    observables.clear();
 }
 
 template <class T> void Observer<T>::unobserve(Observable<T> *o)
 {
     o->removeObserver(this);
-    observed.remove(o);
+    observables.remove(o);
 }
 
 template <class T> void Observer<T>::observe(Observable<T> *o)
 {
-    observed.push_back(o);
+    observables.push_back(o);
     o->addObserver(this);
 }

src/Power.cpp

@@ -1,17 +1,36 @@
+/**
+ * @file Power.cpp
+ * @brief This file contains the implementation of the Power class, which is responsible for managing power-related functionality
+ * of the device. It includes battery level sensing, power management unit (PMU) control, and power state machine management. The
+ * Power class is used by the main device class to manage power-related functionality.
+ *
+ * The file also includes implementations of various battery level sensors, such as the AnalogBatteryLevel class, which assumes
+ * the battery voltage is attached via a voltage-divider to an analog input.
+ *
+ * This file is part of the Meshtastic project.
+ * For more information, see: https://meshtastic.org/
+ */
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
+#include "meshUtils.h"
 #include "sleep.h"
-#include "utils.h"
 
-#ifdef DEBUG_HEAP_MQTT
+// Working USB detection for powered/charging states on the RAK platform
+#ifdef NRF_APM
+#include "nrfx_power.h"
+#endif
+
+#if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
+#if !MESTASTIC_EXCLUDE_WIFI
 #include <WiFi.h>
 #endif
+#endif
 
 #ifndef DELAY_FOREVER
 #define DELAY_FOREVER portMAX_DELAY
@@ -37,14 +56,34 @@ static const adc_atten_t atten = ADC_ATTENUATION;
 #endif
 #endif // BATTERY_PIN && ARCH_ESP32
 
+#ifdef EXT_CHRG_DETECT
+#ifndef EXT_CHRG_DETECT_MODE
+static const uint8_t ext_chrg_detect_mode = INPUT;
+#else
+static const uint8_t ext_chrg_detect_mode = EXT_CHRG_DETECT_MODE;
+#endif
+#ifndef EXT_CHRG_DETECT_VALUE
+static const uint8_t ext_chrg_detect_value = HIGH;
+#else
+static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE;
+#endif
+#endif
+
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
+INA260Sensor ina260Sensor;
+INA219Sensor ina219Sensor;
+INA3221Sensor ina3221Sensor;
+#endif
+
 #ifdef HAS_PMU
 #include "XPowersAXP192.tpp"
 #include "XPowersAXP2101.tpp"
 #include "XPowersLibInterface.hpp"
 XPowersLibInterface *PMU = NULL;
 #else
+
 // Copy of the base class defined in axp20x.h.
-// I'd rather not inlude axp20x.h as it brings Wire dependency.
+// I'd rather not include axp20x.h as it brings Wire dependency.
 class HasBatteryLevel
 {
   public:
@@ -103,8 +142,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 {
     /**
      * Battery state of charge, from 0 to 100 or -1 for unknown
-     *
-     * FIXME - use a lipo lookup table, the current % full is super wrong
      */
     virtual int getBatteryPercent() override
     {
@@ -113,13 +150,32 @@ class AnalogBatteryLevel : public HasBatteryLevel
         if (v < noBatVolt)
             return -1; // If voltage is super low assume no battery installed
 
-#ifdef ARCH_ESP32
+#ifdef NO_BATTERY_LEVEL_ON_CHARGE
         // This does not work on a RAK4631 with battery connected
         if (v > chargingVolt)
             return 0; // While charging we can't report % full on the battery
 #endif
-
-        return clamp((int)(100 * (v - emptyVolt) / (fullVolt - emptyVolt)), 0, 100);
+        /**
+         * @brief   Battery voltage lookup table interpolation to obtain a more
+         * precise percentage rather than the old proportional one.
+         * @author  Gabriele Russo
+         * @date    06/02/2024
+         */
+        float battery_SOC = 0.0;
+        uint16_t voltage = v / NUM_CELLS; // single cell voltage (average)
+        for (int i = 0; i < NUM_OCV_POINTS; i++) {
+            if (OCV[i] <= voltage) {
+                if (i == 0) {
+                    battery_SOC = 100.0; // 100% full
+                } else {
+                    // interpolate between OCV[i] and OCV[i-1]
+                    battery_SOC = (float)100.0 / (NUM_OCV_POINTS - 1.0) *
+                                  (NUM_OCV_POINTS - 1.0 - i + ((float)voltage - OCV[i]) / (OCV[i - 1] - OCV[i]));
+                }
+                break;
+            }
+        }
+        return clamp((int)(battery_SOC), 0, 100);
     }
 
     /**
@@ -128,12 +184,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+        if (hasINA()) {
+            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
+            return getINAVoltage();
+        }
+#endif
+
 #ifndef ADC_MULTIPLIER
 #define ADC_MULTIPLIER 2.0
 #endif
 
 #ifndef BATTERY_SENSE_SAMPLES
-#define BATTERY_SENSE_SAMPLES 30
+#define BATTERY_SENSE_SAMPLES                                                                                                    \
+    15 // Set the number of samples, it has an effect of increasing sensitivity in complex electromagnetic environment.
 #endif
 
 #ifdef BATTERY_PIN
@@ -145,15 +209,87 @@ class AnalogBatteryLevel : public HasBatteryLevel
         if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
-            // Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic
-            // environment.
             uint32_t raw = 0;
-#ifdef ARCH_ESP32
-#ifndef BAT_MEASURE_ADC_UNIT // ADC1
-            for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
-                raw += adc1_get_raw(adc_channel);
+            float scaled = 0;
+
+#ifdef ARCH_ESP32 // ADC block for espressif platforms
+            raw = espAdcRead();
+            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
+            scaled *= operativeAdcMultiplier;
+#else // block for all other platforms
+            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+                raw += analogRead(BATTERY_PIN);
             }
+            raw = raw / BATTERY_SENSE_SAMPLES;
+            scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
+#endif
+            last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
+            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
+            // (last_read_value));
+        }
+        return last_read_value;
+#endif // BATTERY_PIN
+        return 0;
+    }
+
+#if defined(ARCH_ESP32) && !defined(HAS_PMU) && defined(BATTERY_PIN)
+    /**
+     * ESP32 specific function for getting calibrated ADC reads
+     */
+    uint32_t espAdcRead()
+    {
+
+        uint32_t raw = 0;
+        uint8_t raw_c = 0; // raw reading counter
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+#ifdef ADC_CTRL              // enable adc voltage divider when we need to read
+        pinMode(ADC_CTRL, OUTPUT);
+        digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+        delay(10);
+#endif
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            int val_ = adc1_get_raw(adc_channel);
+            if (val_ >= 0) { // save only valid readings
+                raw += val_;
+                raw_c++;
+            }
+            // delayMicroseconds(100);
+        }
+#ifdef ADC_CTRL // disable adc voltage divider when we need to read
+        digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
+#endif
 #else // ADC2
+#ifdef ADC_CTRL
+#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
+        pinMode(ADC_CTRL, OUTPUT);
+        digitalWrite(ADC_CTRL, LOW); // ACTIVE LOW
+        delay(10);
+#endif
+#endif // End ADC_CTRL
+
+#ifdef CONFIG_IDF_TARGET_ESP32S3 // ESP32S3
+        // ADC2 wifi bug workaround not required, breaks compile
+        // On ESP32S3, ADC2 can take turns with Wifi (?)
+
+        int32_t adc_buf;
+        esp_err_t read_result;
+
+        // Multiple samples
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            adc_buf = 0;
+            read_result = -1;
+
+            read_result = adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
+            if (read_result == ESP_OK) {
+                raw += adc_buf;
+                raw_c++; // Count valid samples
+            } else {
+                LOG_DEBUG("An attempt to sample ADC2 failed\n");
+            }
+        }
+
+#else  // Other ESP32
         int32_t adc_buf = 0;
         for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
             // ADC2 wifi bug workaround, see
@@ -162,44 +298,25 @@ class AnalogBatteryLevel : public HasBatteryLevel
             SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
             adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
             raw += adc_buf;
+            raw_c++;
         }
 #endif // BAT_MEASURE_ADC_UNIT
-#else  // !ARCH_ESP32
-            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
-                raw += analogRead(BATTERY_PIN);
+
+#ifdef ADC_CTRL
+#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
+        digitalWrite(ADC_CTRL, HIGH);
+#endif
+#endif // End ADC_CTRL
+
+#endif // End BAT_MEASURE_ADC_UNIT
+        return (raw / (raw_c < 1 ? 1 : raw_c));
     }
 #endif
-            raw = raw / BATTERY_SENSE_SAMPLES;
-            float scaled;
-#ifdef ARCH_ESP32
-            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
-            scaled *= operativeAdcMultiplier;
-#else
-#ifndef VBAT_RAW_TO_SCALED
-            scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
-#else
-            scaled = VBAT_RAW_TO_SCALED(raw); // defined in variant.h
-#endif // VBAT RAW TO SCALED
-#endif // ARCH_ESP32
-       // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
-
-            last_read_value = scaled;
-            return scaled;
-        } else {
-            return last_read_value;
-        }
-#else
-        return 0;
-#endif // BATTERY_PIN
-    }
 
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override
-    {
-        return getBatteryPercent() != -1;
-    }
+    virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
@@ -222,30 +339,60 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /// we can't be smart enough to say 'full'?
     virtual bool isCharging() override
     {
+#ifdef EXT_CHRG_DETECT
+        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
+#else
         return isBatteryConnect() && isVbusIn();
+#endif
     }
 
   private:
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
 
-#ifndef BAT_FULLVOLT
-#define BAT_FULLVOLT 4200
-#endif
-#ifndef BAT_EMPTYVOLT
-#define BAT_EMPTYVOLT 3270
-#endif
-#ifndef BAT_CHARGINGVOLT
-#define BAT_CHARGINGVOLT 4210
-#endif
-#ifndef BAT_NOBATVOLT
-#define BAT_NOBATVOLT 2230
-#endif
-
-    /// For heltecs with no battery connected, the measured voltage is 2204, so raising to 2230 from 2100
-    const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
-    float last_read_value = 0.0;
+    /// For heltecs with no battery connected, the measured voltage is 2204, so
+    // need to be higher than that, in this case is 2500mV (3000-500)
+    const uint16_t OCV[NUM_OCV_POINTS] = {OCV_ARRAY};
+    const float chargingVolt = (OCV[0] + 10) * NUM_CELLS;
+    const float noBatVolt = (OCV[NUM_OCV_POINTS - 1] - 500) * NUM_CELLS;
+    // Start value from minimum voltage for the filter to not start from 0
+    // that could trigger some events.
+    float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS);
     uint32_t last_read_time_ms = 0;
+
+#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO)
+    uint16_t getINAVoltage()
+    {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            return ina219Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
+            return ina260Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA3221].first ==
+                   config.power.device_battery_ina_address) {
+            return ina3221Sensor.getBusVoltageMv();
+        }
+        return 0;
+    }
+
+    bool hasINA()
+    {
+        if (!config.power.device_battery_ina_address) {
+            return false;
+        }
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            if (!ina219Sensor.isInitialized())
+                return ina219Sensor.runOnce() > 0;
+            return ina219Sensor.isRunning();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
+                   config.power.device_battery_ina_address) {
+            if (!ina260Sensor.isInitialized())
+                return ina260Sensor.runOnce() > 0;
+            return ina260Sensor.isRunning();
+        }
+        return false;
+    }
+#endif
 };
 
 AnalogBatteryLevel analogLevel;
@@ -264,6 +411,9 @@ bool Power::analogInit()
 #ifdef EXT_PWR_DETECT
     pinMode(EXT_PWR_DETECT, INPUT);
 #endif
+#ifdef EXT_CHRG_DETECT
+    pinMode(EXT_CHRG_DETECT, ext_chrg_detect_mode);
+#endif
 
 #ifdef BATTERY_PIN
     LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
@@ -287,8 +437,11 @@ bool Power::analogInit()
     adc1_config_channel_atten(adc_channel, atten);
 #else // ADC2
     adc2_config_channel_atten(adc_channel, atten);
+#ifndef CONFIG_IDF_TARGET_ESP32S3
     // ADC2 wifi bug workaround
+    // Not required with ESP32S3, breaks compile
     RTC_reg_b = READ_PERI_REG(SENS_SAR_READ_CTRL2_REG);
+#endif
 #endif
     // calibrate ADC
     esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
@@ -297,13 +450,16 @@ bool Power::analogInit()
         LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
     } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
         LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
-    } else {
+    }
+#ifdef CONFIG_IDF_TARGET_ESP32S3
+    // ESP32S3
+    else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
+        LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse\n");
+    }
+#endif
+    else {
         LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
     }
-#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3)
-    pinMode(37, OUTPUT); // needed for P channel mosfet to work
-    digitalWrite(37, LOW);
-#endif
 #endif // ARCH_ESP32
 
 #ifdef ARCH_NRF52
@@ -312,11 +468,12 @@ bool Power::analogInit()
 #else
     analogReference(AR_INTERNAL); // 3.6V
 #endif
-    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS); // Default of 12 is not very linear. Recommended to use 10 or 11
-                                                         // depending on needed resolution.
-
 #endif // ARCH_NRF52
 
+#ifndef ARCH_ESP32
+    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
+#endif
+
     batteryLevel = &analogLevel;
     return true;
 #else
@@ -324,13 +481,15 @@ bool Power::analogInit()
 #endif
 }
 
+/**
+ * Initializes the Power class.
+ *
+ * @return true if the setup was successful, false otherwise.
+ */
 bool Power::setup()
 {
-    bool found = axpChipInit();
+    bool found = axpChipInit() || analogInit();
 
-    if (!found) {
-        found = analogInit();
-    }
     enabled = found;
     low_voltage_counter = 0;
 
@@ -339,19 +498,9 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-    screen->setOn(false);
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
-    digitalWrite(PIN_EINK_EN, LOW); // power off backlight first
-#endif
-
     LOG_INFO("Shutting down\n");
 
-#ifdef HAS_PMU
-    if (pmu_found == true) {
-        PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
-        PMU->shutdown();
-    }
-#elif defined(ARCH_NRF52) || defined(ARCH_ESP32)
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
 #ifdef PIN_LED1
     ledOff(PIN_LED1);
 #endif
@@ -359,9 +508,9 @@ void Power::shutdown()
     ledOff(PIN_LED2);
 #endif
 #ifdef PIN_LED3
-    ledOff(PIN_LED2);
+    ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER);
+    doDeepSleep(DELAY_FOREVER, false);
 #endif
 }
 
@@ -381,18 +530,33 @@ void Power::readPowerStatus()
                 batteryChargePercent = batteryLevel->getBatteryPercent();
             } else {
                 // If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
-                // In that case, we compute an estimate of the charge percent based on maximum and minimum voltages defined in
-                // power.h
-                batteryChargePercent =
-                    clamp((int)(((batteryVoltageMv - BAT_MILLIVOLTS_EMPTY) * 1e2) / (BAT_MILLIVOLTS_FULL - BAT_MILLIVOLTS_EMPTY)),
+                // In that case, we compute an estimate of the charge percent based on open circuite voltage table defined
+                // in power.h
+                batteryChargePercent = clamp((int)(((batteryVoltageMv - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS)) * 1e2) /
+                                                   ((OCV[0] * NUM_CELLS) - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS))),
                                              0, 100);
             }
         }
 
+        OptionalBool NRF_USB = OptFalse;
+
+#ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
+               // changes.
+
+        nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+
+        if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
+            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+            NRF_USB = OptFalse;
+        } else {
+            powerFSM.trigger(EVENT_POWER_CONNECTED);
+            NRF_USB = OptTrue;
+        }
+#endif
         // Notify any status instances that are observing us
-        const PowerStatus powerStatus2 =
-            PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() ? OptTrue : OptFalse,
-                        batteryLevel->isCharging() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
+        const PowerStatus powerStatus2 = PowerStatus(
+            hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() || NRF_USB == OptTrue ? OptTrue : OptFalse,
+            batteryLevel->isCharging() || NRF_USB == OptTrue ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
         LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
                   powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
         newStatus.notifyObservers(&powerStatus2);
@@ -435,10 +599,11 @@ void Power::readPowerStatus()
 
 #endif
 
-        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in
-        // a row
+        // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
+        // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
+        //
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
-            if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
+            if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
                 low_voltage_counter++;
                 LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
                 if (low_voltage_counter > 10) {
@@ -498,10 +663,12 @@ int32_t Power::runOnce()
             LOG_DEBUG("Battery removed\n");
         }
         */
+#ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
             LOG_DEBUG("PEK long button press\n");
             screen->setOn(false);
         }
+#endif
 
         PMU->clearIrqStatus();
     }
@@ -639,8 +806,8 @@ bool Power::axpChipInit()
             // GNSS VDD 3300mV
             PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
             PMU->enablePowerOutput(XPOWERS_ALDO3);
-
-        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE) {
+        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE ||
+                   HW_VENDOR == meshtastic_HardwareModel_T_WATCH_S3) {
             // t-beam s3 core
             /**
              * gnss module power channel
@@ -671,10 +838,16 @@ bool Power::axpChipInit()
             PMU->setPowerChannelVoltage(XPOWERS_ALDO1, 3300);
             PMU->enablePowerOutput(XPOWERS_ALDO1);
 
-            // sdcard power channle
+            // sdcard power channel
             PMU->setPowerChannelVoltage(XPOWERS_BLDO1, 3300);
             PMU->enablePowerOutput(XPOWERS_BLDO1);
 
+#ifdef T_WATCH_S3
+            // DRV2605 power channel
+            PMU->setPowerChannelVoltage(XPOWERS_BLDO2, 3300);
+            PMU->enablePowerOutput(XPOWERS_BLDO2);
+#endif
+
             // PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
             // PMU->enablePowerOutput(XPOWERS_DCDC4);
 

src/PowerFSM.cpp

@@ -1,5 +1,14 @@
+/**
+ * @file PowerFSM.cpp
+ * @brief Implements the finite state machine for power management.
+ *
+ * This file contains the implementation of the finite state machine (FSM) for power management.
+ * The FSM controls the power states of the device, including SDS (shallow deep sleep), LS (light sleep),
+ * NB (normal mode), and POWER (powered mode). The FSM also handles transitions between states and
+ * actions to be taken upon entering or exiting each state.
+ */
 #include "PowerFSM.h"
-#include "GPS.h"
+#include "Default.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "configuration.h"
@@ -8,6 +17,10 @@
 #include "sleep.h"
 #include "target_specific.h"
 
+#ifndef SLEEP_TIME
+#define SLEEP_TIME 30
+#endif
+
 /// Should we behave as if we have AC power now?
 static bool isPowered()
 {
@@ -37,7 +50,7 @@ static void sdsEnter()
 {
     LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs));
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
 
 extern Power *power;
@@ -72,7 +85,7 @@ static void lsIdle()
         // If some other service would stall sleep, don't let sleep happen yet
         if (doPreflightSleep()) {
             // Briefly come out of sleep long enough to blink the led once every few seconds
-            uint32_t sleepTime = 30;
+            uint32_t sleepTime = SLEEP_TIME;
 
             setLed(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
@@ -94,9 +107,7 @@ static void lsIdle()
                 break;
 
             default:
-                // We woke for some other reason (button press, device interrupt)
-                // uint64_t status = esp_sleep_get_ext1_wakeup_status();
-                LOG_INFO("wakeCause2 %d\n", wakeCause2);
+                // We woke for some other reason (button press, device IRQ interrupt)
 
 #ifdef BUTTON_PIN
                 bool pressed = !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
@@ -128,16 +139,16 @@ static void lsIdle()
 static void lsExit()
 {
     LOG_INFO("Exit state: LS\n");
-    // setGPSPower(true); // restore GPS power
-    if (gps)
-        gps->forceWake(true);
 }
 
 static void nbEnter()
 {
     LOG_DEBUG("Enter state: NB\n");
     screen->setOn(false);
+#ifdef ARCH_ESP32
+    // Only ESP32 should turn off bluetooth
     setBluetoothEnable(false);
+#endif
 
     // FIXME - check if we already have packets for phone and immediately trigger EVENT_PACKETS_FOR_PHONE
 }
@@ -158,12 +169,14 @@ static void serialEnter()
 
 static void serialExit()
 {
+    // Turn bluetooth back on when we leave serial stream API
+    setBluetoothEnable(true);
     screen->print("Serial disconnected\n");
 }
 
 static void powerEnter()
 {
-    LOG_DEBUG("Enter state: POWER\n");
+    // LOG_DEBUG("Enter state: POWER\n");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
         LOG_INFO("Loss of power in Powered\n");
@@ -172,10 +185,12 @@ static void powerEnter()
         screen->setOn(true);
         setBluetoothEnable(true);
         // within enter() the function getState() returns the state we came from
-        if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
+
+        // Mothballed: print change of power-state to device screen
+        /* if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
             strcmp(powerFSM.getState()->name, "DARK") != 0) {
             screen->print("Powered...\n");
-        }
+        }*/
     }
 }
 
@@ -192,8 +207,10 @@ static void powerExit()
 {
     screen->setOn(true);
     setBluetoothEnable(true);
-    if (!isPowered())
-        screen->print("Unpowered...\n");
+
+    // Mothballed: print change of power-state to device screen
+    /*if (!isPowered())
+        screen->print("Unpowered...\n");*/
 }
 
 static void onEnter()
@@ -235,6 +252,9 @@ Fsm powerFSM(&stateBOOT);
 void PowerFSM_setup()
 {
     bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
+    bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
     LOG_INFO("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
@@ -242,7 +262,11 @@ void PowerFSM_setup()
 
     // wake timer expired or a packet arrived
     // if we are a router node, we go to NB (no need for bluetooth) otherwise we go to DARK (so we can send message to phone)
+#ifdef ARCH_ESP32
     powerFSM.add_transition(&stateLS, isRouter ? &stateNB : &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#else // Don't go into a no-bluetooth state on low power platforms
+    powerFSM.add_transition(&stateLS, &stateDARK, EVENT_WAKE_TIMER, NULL, "Wake timer");
+#endif
 
     // We need this transition, because we might not transition if we were waiting to enter light-sleep, because when we wake from
     // light sleep we _always_ transition to NB or dark and
@@ -280,6 +304,7 @@ void PowerFSM_setup()
     powerFSM.add_transition(&stateNB, &stateON, EVENT_INPUT, NULL, "Input Device");
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_INPUT, NULL, "Input Device");
     powerFSM.add_transition(&stateON, &stateON, EVENT_INPUT, NULL, "Input Device");       // restarts the sleep timer
+    powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_INPUT, NULL, "Input Device"); // restarts the sleep timer
 
     powerFSM.add_transition(&stateDARK, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
     powerFSM.add_transition(&stateON, &stateON, EVENT_BLUETOOTH_PAIR, NULL, "Bluetooth pairing");
@@ -324,33 +349,40 @@ void PowerFSM_setup()
     powerFSM.add_transition(&stateDARK, &stateDARK, EVENT_CONTACT_FROM_PHONE, NULL, "Contact from phone");
 
     powerFSM.add_timed_transition(&stateON, &stateDARK,
-                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
                                   "Screen-on timeout");
     powerFSM.add_timed_transition(&statePOWER, &stateDARK,
-                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
-    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
-                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
                                   "Screen-on timeout");
 
-#ifdef ARCH_ESP32
-    State *lowPowerState = &stateLS;
 // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
-
+#ifdef ARCH_ESP32
     // See: https://github.com/meshtastic/firmware/issues/1071
-    if (isRouter || config.power.is_power_saving) {
+    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiatiated through the
+    // modules
+    if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
         powerFSM.add_timed_transition(&stateNB, &stateLS,
-                                      getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
+                                      Default::getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
                                       "Min wake timeout");
-        powerFSM.add_timed_transition(&stateDARK, &stateLS,
-                                      getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs),
-                                      NULL, "Bluetooth timeout");
-    }
 
-    if (config.power.sds_secs != UINT32_MAX)
-        powerFSM.add_timed_transition(lowPowerState, &stateSDS, getConfiguredOrDefaultMs(config.power.sds_secs), NULL,
-                                      "mesh timeout");
+        // If ESP32 and using power-saving, timer mover from DARK to light-sleep
+        // Also serves purpose of the old DARK to DARK transition(?) See https://github.com/meshtastic/firmware/issues/3517
+        powerFSM.add_timed_transition(
+            &stateDARK, &stateLS,
+            Default::getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL,
+            "Bluetooth timeout");
+    } else {
+        // If ESP32, but not using power-saving, check periodically if config has drifted out of stateDark
+        powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
+    }
+#else
+    // If not ESP32, light-sleep not used. Check periodically if config has drifted out of stateDark
+    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
 #endif
 
-    powerFSM.run_machine(); // run one interation of the state machine, so we run our on enter tasks for the initial DARK state
+    powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
 }

src/PowerFSMThread.h

@@ -1,3 +1,4 @@
+#include "Default.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "concurrency/OSThread.h"
@@ -21,19 +22,19 @@ class PowerFSMThread : public OSThread
 
         /// If we are in power state we force the CPU to wake every 10ms to check for serial characters (we don't yet wake
         /// cpu for serial rx - FIXME)
-        auto state = powerFSM.getState();
+        const State *state = powerFSM.getState();
         canSleep = (state != &statePOWER) && (state != &stateSERIAL);
 
         if (powerStatus->getHasUSB()) {
             timeLastPowered = millis();
         } else if (config.power.on_battery_shutdown_after_secs > 0 && config.power.on_battery_shutdown_after_secs != UINT32_MAX &&
                    millis() > (timeLastPowered +
-                               getConfiguredOrDefaultMs(
+                               Default::getConfiguredOrDefaultMs(
                                    config.power.on_battery_shutdown_after_secs))) { // shutdown after 30 minutes unpowered
             powerFSM.trigger(EVENT_SHUTDOWN);
         }
 
-        return 10;
+        return 100;
     }
 };
 

src/RedirectablePrint.cpp

@@ -10,6 +10,10 @@
 #include <sys/time.h>
 #include <time.h>
 
+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
 /**
  * A printer that doesn't go anywhere
  */
@@ -18,6 +22,12 @@ NoopPrint noopPrint;
 #if HAS_WIFI || HAS_ETHERNET
 extern Syslog syslog;
 #endif
+void RedirectablePrint::rpInit()
+{
+#ifdef HAS_FREE_RTOS
+    inDebugPrint = xSemaphoreCreateMutexStatic(&this->_MutexStorageSpace);
+#endif
+}
 
 void RedirectablePrint::setDestination(Print *_dest)
 {
@@ -62,13 +72,24 @@ size_t RedirectablePrint::vprintf(const char *format, va_list arg)
 
 size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
-    if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, "DEBUG") == 0) {
+#ifdef ARCH_PORTDUINO
+    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
+        return 0;
+    else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
+        return 0;
+    else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
+        return 0;
+#endif
+    if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
         return 0;
     }
     size_t r = 0;
-
+#ifdef HAS_FREE_RTOS
+    if (inDebugPrint != nullptr && xSemaphoreTake(inDebugPrint, portMAX_DELAY) == pdTRUE) {
+#else
     if (!inDebugPrint) {
         inDebugPrint = true;
+#endif
 
         va_list arg;
         va_start(arg, format);
@@ -78,7 +99,7 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 
         // If we are the first message on a report, include the header
         if (!isContinuationMessage) {
-            uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
+            uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // display local time on logfile
             if (rtc_sec > 0) {
                 long hms = rtc_sec % SEC_PER_DAY;
                 // hms += tz.tz_dsttime * SEC_PER_HOUR;
@@ -90,10 +111,17 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
                 int hour = hms / SEC_PER_HOUR;
                 int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
                 int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
-
+#ifdef ARCH_PORTDUINO
+                r += ::printf("%s | %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+#else
                 r += printf("%s | %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+#endif
             } else
+#ifdef ARCH_PORTDUINO
+                r += ::printf("%s | ??:??:?? %u ", logLevel, millis() / 1000);
+#else
                 r += printf("%s | ??:??:?? %u ", logLevel, millis() / 1000);
+#endif
 
             auto thread = concurrency::OSThread::currentThread;
             if (thread) {
@@ -141,7 +169,11 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
         va_end(arg);
 
         isContinuationMessage = !hasNewline;
+#ifdef HAS_FREE_RTOS
+        xSemaphoreGive(inDebugPrint);
+#else
         inDebugPrint = false;
+#endif
     }
 
     return r;

src/RedirectablePrint.h

@@ -1,5 +1,6 @@
 #pragma once
 
+#include "../freertosinc.h"
 #include <Print.h>
 #include <stdarg.h>
 #include <string>
@@ -16,14 +17,19 @@ class RedirectablePrint : public Print
     /// Used to allow multiple logDebug messages to appear on a single log line
     bool isContinuationMessage = false;
 
+#ifdef HAS_FREE_RTOS
+    SemaphoreHandle_t inDebugPrint = nullptr;
+    StaticSemaphore_t _MutexStorageSpace;
+#else
     volatile bool inDebugPrint = false;
-
+#endif
   public:
     explicit RedirectablePrint(Print *_dest) : dest(_dest) {}
 
     /**
      * Set a new destination
      */
+    void rpInit();
     void setDestination(Print *dest);
 
     virtual size_t write(uint8_t c);

src/SerialConsole.cpp

@@ -3,7 +3,11 @@
 #include "PowerFSM.h"
 #include "configuration.h"
 
+#ifdef RP2040_SLOW_CLOCK
+#define Port Serial2
+#else
 #define Port Serial
+#endif
 // Defaulting to the formerly removed phone_timeout_secs value of 15 minutes
 #define SERIAL_CONNECTION_TIMEOUT (15 * 60) * 1000UL
 
@@ -12,6 +16,7 @@ SerialConsole *console;
 void consoleInit()
 {
     new SerialConsole(); // Must be dynamically allocated because we are now inheriting from thread
+    DEBUG_PORT.rpInit(); // Simply sets up semaphore
 }
 
 void consolePrintf(const char *format, ...)
@@ -30,6 +35,10 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
     canWrite = false; // We don't send packets to our port until it has talked to us first
                       // setDestination(&noopPrint); for testing, try turning off 'all' debug output and see what leaks
 
+#ifdef RP2040_SLOW_CLOCK
+    Port.setTX(SERIAL2_TX);
+    Port.setRX(SERIAL2_RX);
+#endif
     Port.begin(SERIAL_BAUD);
 #if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
     time_t timeout = millis();
@@ -63,7 +72,7 @@ bool SerialConsole::checkIsConnected()
 
 /**
  * we override this to notice when we've received a protobuf over the serial
- * stream.  Then we shunt off debug serial output.
+ * stream.  Then we shut off debug serial output.
  */
 bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 {

src/airtime.cpp

@@ -6,20 +6,22 @@ AirTime *airTime = NULL;
 
 // Don't read out of this directly. Use the helper functions.
 
+uint32_t air_period_tx[PERIODS_TO_LOG];
+uint32_t air_period_rx[PERIODS_TO_LOG];
+
 void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms)
 {
 
     if (reportType == TX_LOG) {
         LOG_DEBUG("AirTime - Packet transmitted : %ums\n", airtime_ms);
         this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms;
-        myNodeInfo.air_period_tx[0] = myNodeInfo.air_period_tx[0] + airtime_ms;
+        air_period_tx[0] = air_period_tx[0] + airtime_ms;
 
         this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms;
-
     } else if (reportType == RX_LOG) {
         LOG_DEBUG("AirTime - Packet received : %ums\n", airtime_ms);
         this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms;
-        myNodeInfo.air_period_rx[0] = myNodeInfo.air_period_rx[0] + airtime_ms;
+        air_period_rx[0] = air_period_rx[0] + airtime_ms;
     } else if (reportType == RX_ALL_LOG) {
         LOG_DEBUG("AirTime - Packet received (noise?) : %ums\n", airtime_ms);
         this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms;
@@ -55,16 +57,16 @@ void AirTime::airtimeRotatePeriod()
             this->airtimes.periodRX[i + 1] = this->airtimes.periodRX[i];
             this->airtimes.periodRX_ALL[i + 1] = this->airtimes.periodRX_ALL[i];
 
-            myNodeInfo.air_period_tx[i + 1] = this->airtimes.periodTX[i];
-            myNodeInfo.air_period_rx[i + 1] = this->airtimes.periodRX[i];
+            air_period_tx[i + 1] = this->airtimes.periodTX[i];
+            air_period_rx[i + 1] = this->airtimes.periodRX[i];
         }
 
         this->airtimes.periodTX[0] = 0;
         this->airtimes.periodRX[0] = 0;
         this->airtimes.periodRX_ALL[0] = 0;
 
-        myNodeInfo.air_period_tx[0] = 0;
-        myNodeInfo.air_period_rx[0] = 0;
+        air_period_tx[0] = 0;
+        air_period_rx[0] = 0;
 
         this->airtimes.lastPeriodIndex = this->currentPeriodIndex();
     }
@@ -179,18 +181,17 @@ int32_t AirTime::runOnce()
         }
 
         // Init airtime windows to all 0
-        for (int i = 0; i < myNodeInfo.air_period_rx_count; i++) {
+        for (int i = 0; i < PERIODS_TO_LOG; i++) {
             this->airtimes.periodTX[i] = 0;
             this->airtimes.periodRX[i] = 0;
             this->airtimes.periodRX_ALL[i] = 0;
 
-            // myNodeInfo.air_period_tx[i] = 0;
-            // myNodeInfo.air_period_rx[i] = 0;
+            // air_period_tx[i] = 0;
+            // air_period_rx[i] = 0;
         }
 
         firstTime = false;
         lastUtilPeriod = utilPeriod;
-
     } else {
         this->airtimeRotatePeriod();
 
@@ -206,12 +207,6 @@ int32_t AirTime::runOnce()
 
             this->utilizationTX[utilPeriodTX] = 0;
         }
-
-        // Update channel_utilization every second.
-        myNodeInfo.channel_utilization = airTime->channelUtilizationPercent();
-
-        // Update channel_utilization every second.
-        myNodeInfo.air_util_tx = airTime->utilizationTXPercent();
     }
     /*
         LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%\n", utilPeriodTX, airTime->utilizationTXPercent());

src/airtime.h

@@ -17,9 +17,9 @@
 
   Example analytics:
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel.
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel.
 
-  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel, including
+  TX_LOG + RX_LOG = Total air time for a particular meshtastic channel, including
                     other lora radios.
 
   RX_ALL_LOG - RX_LOG = Other lora radios on our frequency channel.

src/commands.h

@@ -15,4 +15,6 @@ enum class Cmd {
     PRINT,
     START_SHUTDOWN_SCREEN,
     START_REBOOT_SCREEN,
+    SHOW_PREV_FRAME,
+    SHOW_NEXT_FRAME
 };

src/concurrency/InterruptableDelay.h

@@ -18,7 +18,7 @@ namespace concurrency
  *
  * Useful for they top level loop() delay call to keep the CPU powered down until our next scheduled event or some external event.
  *
- * This is implmented for FreeRTOS but should be easy to port to other operating systems.
+ * This is implemented for FreeRTOS but should be easy to port to other operating systems.
  */
 class InterruptableDelay
 {

src/concurrency/OSThread.h

@@ -53,7 +53,7 @@ class OSThread : public Thread
 
     static void setup();
 
-    int32_t disable();
+    virtual int32_t disable();
 
     /**
      * Wait a specified number msecs starting from the current time (rather than the last time we were run)
@@ -67,6 +67,7 @@ class OSThread : public Thread
      * Returns desired period for next invocation (or RUN_SAME for no change)
      */
     virtual int32_t runOnce() = 0;
+    bool sleepOnNextExecution = false;
 
     // Do not override this
     virtual void run();

src/configuration.h

@@ -57,8 +57,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define REQUIRE_RADIO true // If true, we will fail to start if the radio is not found
 
 /// Convert a preprocessor name into a quoted string
-#define xstr(s) str(s)
-#define str(s) #s
+#define xstr(s) ystr(s)
+#define ystr(s) #s
 
 /// Convert a preprocessor name into a quoted string and if that string is empty use "unset"
 #define optstr(s) (xstr(s)[0] ? xstr(s) : "unset")
@@ -74,6 +74,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RTC_DATA_ATTR
 #endif
 
+// -----------------------------------------------------------------------------
+// Regulatory overrides for producing regional builds
+// -----------------------------------------------------------------------------
+
+// Define if region should override user saved region
+// #define LORA_REGIONCODE meshtastic_Config_LoRaConfig_RegionCode_SG_923
+
 // -----------------------------------------------------------------------------
 // Feature toggles
 // -----------------------------------------------------------------------------
@@ -98,8 +105,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// The m5stack I2C Keyboard (also RAK14004)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
+#define TDECK_KB_ADDR 0x55
+#define BBQ10_KB_ADDR 0x1F
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -109,6 +118,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MCP9808_ADDR 0x18
 #define INA_ADDR 0x40
 #define INA_ADDR_ALTERNATE 0x41
+#define INA_ADDR_WAVESHARE_UPS 0x43
+#define INA3221_ADDR 0x42
 #define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
 #define QMC5883L_ADDR 0x1E
@@ -123,6 +134,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 #define MPU6050_ADDR 0x68
 #define LIS3DH_ADR 0x18
+#define BMA423_ADDR 0x19
+#define LSM6DS3_ADDR 0x6A
 
 // -----------------------------------------------------------------------------
 // LED
@@ -132,19 +145,27 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // Security
 // -----------------------------------------------------------------------------
-
 #define ATECC608B_ADDR 0x35
 
+// -----------------------------------------------------------------------------
+// IO Expander
+// -----------------------------------------------------------------------------
+#define TCA9555_ADDR 0x26
+
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------
-
+#ifndef GPS_BAUDRATE
 #define GPS_BAUDRATE 9600
+#endif
 
 #ifndef GPS_THREAD_INTERVAL
-#define GPS_THREAD_INTERVAL 100
+#define GPS_THREAD_INTERVAL 200
 #endif
 
+// convert 24-bit color to 16-bit (56K)
+#define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
+
 /* Step #1: offer chance for variant-specific defines */
 #include "variant.h"
 
@@ -152,6 +173,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    also enable HAS_ option not specifically disabled by variant.h */
 #include "architecture.h"
 
+#ifndef DEFAULT_REBOOT_SECONDS
+#define DEFAULT_REBOOT_SECONDS 7
+#endif
+
+#ifndef DEFAULT_SHUTDOWN_SECONDS
+#define DEFAULT_SHUTDOWN_SECONDS 2
+#endif
+
 /* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
 
 #ifndef HAS_WIFI
@@ -172,9 +201,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_BUTTON
 #define HAS_BUTTON 0
 #endif
+#ifndef HAS_TRACKBALL
+#define HAS_TRACKBALL 0
+#endif
+#ifndef HAS_TOUCHSCREEN
+#define HAS_TOUCHSCREEN 0
+#endif
 #ifndef HAS_TELEMETRY
 #define HAS_TELEMETRY 0
 #endif
+#ifndef HAS_SENSOR
+#define HAS_SENSOR 0
+#endif
 #ifndef HAS_RADIO
 #define HAS_RADIO 0
 #endif
@@ -194,3 +232,64 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
 #endif
+
+// -----------------------------------------------------------------------------
+// Global switches to turn off features for a minimized build
+// -----------------------------------------------------------------------------
+
+// #define MESHTASTIC_MINIMIZE_BUILD 1
+#ifdef MESHTASTIC_MINIMIZE_BUILD
+#define MESHTASTIC_EXCLUDE_MODULES 1
+#define MESHTASTIC_EXCLUDE_WIFI 1
+#define MESHTASTIC_EXCLUDE_BLUETOOTH 1
+#define MESHTASTIC_EXCLUDE_GPS 1
+#define MESHTASTIC_EXCLUDE_SCREEN 1
+#define MESHTASTIC_EXCLUDE_MQTT 1
+#endif
+
+// Turn off all optional modules
+#ifdef MESHTASTIC_EXCLUDE_MODULES
+#define MESHTASTIC_EXCLUDE_AUDIO 1
+#define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
+#define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1
+#define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1
+#define MESHTASTIC_EXCLUDE_PAXCOUNTER 1
+#define MESHTASTIC_EXCLUDE_POWER_TELEMETRY 1
+#define MESHTASTIC_EXCLUDE_RANGETEST 1
+#define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
+#define MESHTASTIC_EXCLUDE_STOREFORWARD 1
+#define MESHTASTIC_EXCLUDE_ATAK 1
+#define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
+#define MESHTASTIC_EXCLUDE_NEIGHBORINFO 1
+#define MESHTASTIC_EXCLUDE_TRACEROUTE 1
+#define MESHTASTIC_EXCLUDE_WAYPOINT 1
+#define MESHTASTIC_EXCLUDE_INPUTBROKER 1
+#define MESHTASTIC_EXCLUDE_SERIAL 1
+#endif
+
+// // Turn off wifi even if HW supports wifi (webserver relies on wifi and is also disabled)
+#ifdef MESHTASTIC_EXCLUDE_WIFI
+#define MESHTASTIC_EXCLUDE_WEBSERVER 1
+#undef HAS_WIFI
+#define HAS_WIFI 0
+#endif
+
+// // Turn off Bluetooth
+#ifdef MESHTASTIC_EXCLUDE_BLUETOOTH
+#undef HAS_BLUETOOTH
+#define HAS_BLUETOOTH 0
+#endif
+
+// // Turn off GPS
+#ifdef MESHTASTIC_EXCLUDE_GPS
+#undef HAS_GPS
+#define HAS_GPS 0
+#undef MESHTASTIC_EXCLUDE_RANGETEST
+#define MESHTASTIC_EXCLUDE_RANGETEST 1
+#endif
+
+// Turn off Screen
+#ifdef MESHTASTIC_EXCLUDE_SCREEN
+#undef HAS_SCREEN
+#define HAS_SCREEN 0
+#endif

src/detect/LoRaRadioType.h

@@ -0,0 +1,5 @@
+#pragma once
+
+enum LoRaRadioType { NO_RADIO, STM32WLx_RADIO, SIM_RADIO, RF95_RADIO, SX1262_RADIO, SX1268_RADIO, LLCC68_RADIO, SX1280_RADIO };
+
+extern LoRaRadioType radioType;

src/detect/ScanI2C.cpp

@@ -30,14 +30,14 @@ ScanI2C::FoundDevice ScanI2C::firstRTC() const
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 {
-    ScanI2C::DeviceType types[] = {CARDKB, RAK14004};
-    return firstOfOrNONE(2, types);
+    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004};
+    return firstOfOrNONE(4, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH};
-    return firstOfOrNONE(2, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3};
+    return firstOfOrNONE(4, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const

src/detect/ScanI2C.h

@@ -16,13 +16,17 @@ class ScanI2C
         RTC_RV3028,
         RTC_PCF8563,
         CARDKB,
+        TDECKKB,
+        BBQ10KB,
         RAK14004,
         PMU_AXP192_AXP2101,
         BME_680,
         BME_280,
         BMP_280,
+        BMP_085,
         INA260,
         INA219,
+        INA3221,
         MCP9808,
         SHT31,
         SHTC3,
@@ -33,6 +37,10 @@ class ScanI2C
         PMSA0031,
         MPU6050,
         LIS3DH,
+        BMA423,
+        BQ24295,
+        LSM6DS3,
+        TCA9555,
         NCP5623,
     } DeviceType;
 

src/detect/ScanI2CTwoWire.cpp

@@ -2,7 +2,9 @@
 
 #include "concurrency/LockGuard.h"
 #include "configuration.h"
-
+#if defined(ARCH_PORTDUINO)
+#include "linux/LinuxHardwareI2C.h"
+#endif
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
 #include "main.h" // atecc
 #endif
@@ -162,7 +164,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
     for (addr.address = 1; addr.address < 127; addr.address++) {
         i2cBus->beginTransmission(addr.address);
+#ifdef ARCH_PORTDUINO
+        if (i2cBus->read() != -1)
+            err = 0;
+        else
+            err = 2;
+#else
         err = i2cBus->endTransmission();
+#endif
         type = NONE;
         if (err == 0) {
             LOG_DEBUG("I2C device found at address 0x%x\n", addr.address);
@@ -174,8 +183,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
             case ATECC608B_ADDR:
-                type = ATECC608B;
-                if (atecc.begin(addr.address) == true) {
+#ifdef RP2040_SLOW_CLOCK
+                if (atecc.begin(addr.address, Wire, Serial2) == true)
+#else
+                if (atecc.begin(addr.address) == true)
+#endif
+
+                {
                     LOG_INFO("ATECC608B initialized\n");
                 } else {
                     LOG_WARN("ATECC608B initialization failed\n");
@@ -212,9 +226,12 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                 }
                 break;
 
-                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n")
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard found\n");
+                SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10 keyboard found\n");
+                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n");
+#ifdef HAS_NCP5623
                 SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found\n");
-
+#endif
 #ifdef HAS_PMU
                 SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found\n")
 #endif
@@ -230,6 +247,10 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                     LOG_INFO("BME-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = BME_280;
                     break;
+                case 0x55:
+                    LOG_INFO("BMP-085 or BMP-180 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = BMP_085;
+                    break;
                 default:
                     LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = BMP_280;
@@ -238,6 +259,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
             case INA_ADDR:
             case INA_ADDR_ALTERNATE:
+            case INA_ADDR_WAVESHARE_UPS:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
                 LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
                 if (registerValue == 0x5449) {
@@ -248,7 +270,16 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                     type = INA219;
                 }
                 break;
-
+            case INA3221_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
+                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
+                if (registerValue == 0x5449) {
+                    LOG_INFO("INA3221 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = INA3221;
+                } else { // Unknown device
+                    LOG_INFO("No INA3221 found at address 0x%x\n", (uint8_t)addr.address);
+                }
+                break;
             case MCP9808_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
                 if (registerValue == 0x0400) {
@@ -268,11 +299,31 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                 SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found\n")
 
                 SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found\n")
-                SCAN_SIMPLE_CASE(QMI8658_ADDR, QMI8658, "QMI8658 Highrate 6-Axis inertial measurement sensor found\n")
+
+            case QMI8658_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0A), 1); // get ID
+                if (registerValue == 0xC0) {
+                    type = BQ24295;
+                    LOG_INFO("BQ24295 PMU found\n");
+                    break;
+                }
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
+                if (registerValue == 0x6A) {
+                    type = LSM6DS3;
+                    LOG_INFO("LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                } else {
+                    type = QMI8658;
+                    LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found\n");
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found\n")
 
                 SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
                 SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
+                SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
+                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found\n");
 
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);

src/detect/ScanI2CTwoWire.h

@@ -18,6 +18,8 @@ class ScanI2CTwoWire : public ScanI2C
 
     ScanI2C::FoundDevice find(ScanI2C::DeviceType) const override;
 
+    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
+
     bool exists(ScanI2C::DeviceType) const override;
 
     size_t countDevices() const override;
@@ -51,6 +53,4 @@ class ScanI2CTwoWire : public ScanI2C
     uint16_t getRegisterValue(const RegisterLocation &, ResponseWidth) const;
 
     DeviceType probeOLED(ScanI2C::DeviceAddress) const;
-
-    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
 };

src/detect/einkScan.h

@@ -1,6 +1,6 @@
 #include "../configuration.h"
 
-#ifdef RAK4630
+#ifdef RAK_4631
 #include "../main.h"
 #include <SPI.h>
 

src/freertosinc.h

@@ -12,7 +12,7 @@
 #include <freertos/task.h>
 #endif
 
-#if defined(ARDUINO_NRF52_ADAFRUIT)
+#if defined(ARDUINO_NRF52_ADAFRUIT) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_RP2040)
 #define HAS_FREE_RTOS
 
 #include <FreeRTOS.h>