Add portduino_status, assign hardware device IDs, and try to recover a CH341 device on a USB error

Replace strcpy with strncpy and null termination (#9436 )
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
2026-01-27 20:21:52 +00:00 · 2026-01-26 15:48:44 -06:00 · 2026-01-26 14:32:03 -06:00 · 2026-01-26 14:28:05 -06:00 · 2026-01-26 11:54:14 -06:00 · 2026-01-26 08:56:38 -06:00
65 changed files with 1005 additions and 616 deletions
--- a/platformio.ini
+++ b/platformio.ini
@@ -119,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/613c0953313bbd236f4ddc5ede447e9edf8e890a.zip
+	https://github.com/meshtastic/device-ui/archive/37ad715b76cd6ca4aa500a4a4d9740e3cdf3e3cb.zip

 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
--- a/src/gps/RTC.cpp
+++ b/src/gps/RTC.cpp
@@ -397,7 +397,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
    return (currentQuality >= minQuality) ? getTime(local) : 0;
 }

-time_t gm_mktime(struct tm *tm)
+time_t gm_mktime(const struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
    time_t result = 0;
@@ -413,8 +413,8 @@ time_t gm_mktime(struct tm *tm)
    days_before_this_year -= 719162; // (1969 * 365 + 1969 / 4 - 1969 / 100 + 1969 / 400);

    // Now, within this tm->year, compute the days *before* this tm->month starts.
-    int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
-    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                // tm->tm_mon is 0..11
+    static const int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
+    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                             // tm->tm_mon is 0..11

    // If this is a leap year, and we're past February, add a day:
    if (tm->tm_mon >= 2 && (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0)) {
@@ -435,6 +435,7 @@ time_t gm_mktime(struct tm *tm)

    return result;
 #else
-    return mktime(tm);
+    struct tm tmCopy = *tm;
+    return mktime(&tmCopy);
 #endif
 }
--- a/src/gps/RTC.h
+++ b/src/gps/RTC.h
@@ -54,7 +54,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local = false);

 RTCSetResult readFromRTC();

-time_t gm_mktime(struct tm *tm);
+time_t gm_mktime(const struct tm *tm);

 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
--- a/src/graphics/draw/MenuHandler.cpp
+++ b/src/graphics/draw/MenuHandler.cpp
@@ -266,52 +266,8 @@ void menuHandler::FrequencySlotPicker()

    // Calculate number of channels (copied from RadioInterface::applyModemConfig())
    meshtastic_Config_LoRaConfig &loraConfig = config.lora;
-    double bw = loraConfig.bandwidth;
-    if (loraConfig.use_preset) {
-        switch (loraConfig.modem_preset) {
-        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-            bw = (myRegion->wideLora) ? 1625.0 : 500;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-            bw = (myRegion->wideLora) ? 1625.0 : 500;
-            break;
-        default:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
-            bw = (myRegion->wideLora) ? 406.25 : 125;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
-            bw = (myRegion->wideLora) ? 406.25 : 125;
-            break;
-        }
-    } else {
-        bw = loraConfig.bandwidth;
-        if (bw == 31) // This parameter is not an integer
-            bw = 31.25;
-        if (bw == 62) // Fix for 62.5Khz bandwidth
-            bw = 62.5;
-        if (bw == 200)
-            bw = 203.125;
-        if (bw == 400)
-            bw = 406.25;
-        if (bw == 800)
-            bw = 812.5;
-        if (bw == 1600)
-            bw = 1625.0;
-    }
+    double bw = loraConfig.use_preset ? modemPresetToBwKHz(loraConfig.modem_preset, myRegion->wideLora)
+                                      : bwCodeToKHz(loraConfig.bandwidth);

    uint32_t numChannels = 0;
    if (myRegion) {
--- a/src/graphics/draw/MenuHandler.h
+++ b/src/graphics/draw/MenuHandler.h
@@ -140,7 +140,7 @@ struct ScreenColor {
    uint8_t b;
    bool useVariant;

-    ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
+    explicit ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
        : r(rIn), g(gIn), b(bIn), useVariant(variantIn)
    {
    }
--- a/src/input/TrackballInterruptBase.cpp
+++ b/src/input/TrackballInterruptBase.cpp
@@ -1,5 +1,7 @@
 #include "TrackballInterruptBase.h"
+#include "Throttle.h"
 #include "configuration.h"
+
 extern bool osk_found;

 TrackballInterruptBase::TrackballInterruptBase(const char *name) : concurrency::OSThread(name), _originName(name) {}
@@ -55,17 +57,27 @@ int32_t TrackballInterruptBase::runOnce()
 {
    InputEvent e = {};
    e.inputEvent = INPUT_BROKER_NONE;
+#if TB_THRESHOLD
+    if (lastInterruptTime && !Throttle::isWithinTimespanMs(lastInterruptTime, 1000)) {
+        left_counter = 0;
+        right_counter = 0;
+        up_counter = 0;
+        down_counter = 0;
+        lastInterruptTime = 0;
+    }
+#ifdef INPUT_DEBUG
+    if (left_counter > 0 || right_counter > 0 || up_counter > 0 || down_counter > 0) {
+        LOG_DEBUG("L %u R %u U %u D %u, time %u", left_counter, right_counter, up_counter, down_counter, millis());
+    }
+#endif
+#endif

    // Handle long press detection for press button
    if (pressDetected && pressStartTime > 0) {
        uint32_t pressDuration = millis() - pressStartTime;
        bool buttonStillPressed = false;

-#if defined(T_DECK)
-        buttonStillPressed = (this->action == TB_ACTION_PRESSED);
-#else
        buttonStillPressed = !digitalRead(_pinPress);
-#endif

        if (!buttonStillPressed) {
            // Button released
@@ -134,23 +146,31 @@ int32_t TrackballInterruptBase::runOnce()
        }
    }

-#if defined(T_DECK) // T-deck gets a super-simple debounce on trackball
-    if (this->action == TB_ACTION_PRESSED && !pressDetected) {
+#if TB_THRESHOLD
+    if (this->action == TB_ACTION_PRESSED && (!pressDetected || pressStartTime == 0)) {
        // Start long press detection
        pressDetected = true;
        pressStartTime = millis();
        // Don't send event yet, wait to see if it's a long press
-    } else if (this->action == TB_ACTION_UP && lastEvent == TB_ACTION_UP) {
-        // LOG_DEBUG("Trackball event UP");
+    } else if (up_counter >= TB_THRESHOLD) {
+#ifdef INPUT_DEBUG
+        LOG_DEBUG("Trackball event UP %u", millis());
+#endif
        e.inputEvent = this->_eventUp;
-    } else if (this->action == TB_ACTION_DOWN && lastEvent == TB_ACTION_DOWN) {
-        // LOG_DEBUG("Trackball event DOWN");
+    } else if (down_counter >= TB_THRESHOLD) {
+#ifdef INPUT_DEBUG
+        LOG_DEBUG("Trackball event DOWN %u", millis());
+#endif
        e.inputEvent = this->_eventDown;
-    } else if (this->action == TB_ACTION_LEFT && lastEvent == TB_ACTION_LEFT) {
-        // LOG_DEBUG("Trackball event LEFT");
+    } else if (left_counter >= TB_THRESHOLD) {
+#ifdef INPUT_DEBUG
+        LOG_DEBUG("Trackball event LEFT %u", millis());
+#endif
        e.inputEvent = this->_eventLeft;
-    } else if (this->action == TB_ACTION_RIGHT && lastEvent == TB_ACTION_RIGHT) {
-        // LOG_DEBUG("Trackball event RIGHT");
+    } else if (right_counter >= TB_THRESHOLD) {
+#ifdef INPUT_DEBUG
+        LOG_DEBUG("Trackball event RIGHT %u", millis());
+#endif
        e.inputEvent = this->_eventRight;
    }
 #else
@@ -183,6 +203,12 @@ int32_t TrackballInterruptBase::runOnce()
        e.source = this->_originName;
        e.kbchar = 0x00;
        this->notifyObservers(&e);
+#if TB_THRESHOLD
+        left_counter = 0;
+        right_counter = 0;
+        up_counter = 0;
+        down_counter = 0;
+#endif
    }

    // Only update lastEvent for non-press actions or completed press actions
@@ -198,25 +224,49 @@ int32_t TrackballInterruptBase::runOnce()

 void TrackballInterruptBase::intPressHandler()
 {
-    this->action = TB_ACTION_PRESSED;
+    if (!Throttle::isWithinTimespanMs(lastInterruptTime, 10))
+        this->action = TB_ACTION_PRESSED;
+    lastInterruptTime = millis();
 }

 void TrackballInterruptBase::intDownHandler()
 {
-    this->action = TB_ACTION_DOWN;
+    if (TB_THRESHOLD || !Throttle::isWithinTimespanMs(lastInterruptTime, 10))
+        this->action = TB_ACTION_DOWN;
+    lastInterruptTime = millis();
+
+#if TB_THRESHOLD
+    down_counter++;
+#endif
 }

 void TrackballInterruptBase::intUpHandler()
 {
-    this->action = TB_ACTION_UP;
+    if (TB_THRESHOLD || !Throttle::isWithinTimespanMs(lastInterruptTime, 10))
+        this->action = TB_ACTION_UP;
+    lastInterruptTime = millis();
+
+#if TB_THRESHOLD
+    up_counter++;
+#endif
 }

 void TrackballInterruptBase::intLeftHandler()
 {
-    this->action = TB_ACTION_LEFT;
+    if (TB_THRESHOLD || !Throttle::isWithinTimespanMs(lastInterruptTime, 10))
+        this->action = TB_ACTION_LEFT;
+    lastInterruptTime = millis();
+#if TB_THRESHOLD
+    left_counter++;
+#endif
 }

 void TrackballInterruptBase::intRightHandler()
 {
-    this->action = TB_ACTION_RIGHT;
+    if (TB_THRESHOLD || !Throttle::isWithinTimespanMs(lastInterruptTime, 10))
+        this->action = TB_ACTION_RIGHT;
+    lastInterruptTime = millis();
+#if TB_THRESHOLD
+    right_counter++;
+#endif
 }
--- a/src/input/TrackballInterruptBase.h
+++ b/src/input/TrackballInterruptBase.h
@@ -12,6 +12,10 @@
 #endif
 #endif

+#ifndef TB_THRESHOLD
+#define TB_THRESHOLD 0
+#endif
+
 class TrackballInterruptBase : public Observable<const InputEvent *>, public concurrency::OSThread
 {
  public:
@@ -25,8 +29,6 @@ class TrackballInterruptBase : public Observable<const InputEvent *>, public con
    void intUpHandler();
    void intLeftHandler();
    void intRightHandler();
-    uint32_t lastTime = 0;
-
    virtual int32_t runOnce() override;

  protected:
@@ -67,4 +69,12 @@ class TrackballInterruptBase : public Observable<const InputEvent *>, public con
    input_broker_event _eventPressedLong = INPUT_BROKER_NONE;
    const char *_originName;
    TrackballInterruptBaseActionType lastEvent = TB_ACTION_NONE;
+    volatile uint32_t lastInterruptTime = 0;
+
+#if TB_THRESHOLD
+    volatile uint8_t left_counter = 0;
+    volatile uint8_t right_counter = 0;
+    volatile uint8_t up_counter = 0;
+    volatile uint8_t down_counter = 0;
+#endif
 };
--- a/src/input/TrackballInterruptImpl1.cpp
+++ b/src/input/TrackballInterruptImpl1.cpp
@@ -24,41 +24,26 @@ void TrackballInterruptImpl1::init(uint8_t pinDown, uint8_t pinUp, uint8_t pinLe

 void TrackballInterruptImpl1::handleIntDown()
 {
-    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
-        trackballInterruptImpl1->lastTime = millis();
-        trackballInterruptImpl1->intDownHandler();
-        trackballInterruptImpl1->setIntervalFromNow(20);
-    }
+    trackballInterruptImpl1->intDownHandler();
+    trackballInterruptImpl1->setIntervalFromNow(20);
 }
 void TrackballInterruptImpl1::handleIntUp()
 {
-    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
-        trackballInterruptImpl1->lastTime = millis();
-        trackballInterruptImpl1->intUpHandler();
-        trackballInterruptImpl1->setIntervalFromNow(20);
-    }
+    trackballInterruptImpl1->intUpHandler();
+    trackballInterruptImpl1->setIntervalFromNow(20);
 }
 void TrackballInterruptImpl1::handleIntLeft()
 {
-    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
-        trackballInterruptImpl1->lastTime = millis();
-        trackballInterruptImpl1->intLeftHandler();
-        trackballInterruptImpl1->setIntervalFromNow(20);
-    }
+    trackballInterruptImpl1->intLeftHandler();
+    trackballInterruptImpl1->setIntervalFromNow(20);
 }
 void TrackballInterruptImpl1::handleIntRight()
 {
-    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
-        trackballInterruptImpl1->lastTime = millis();
-        trackballInterruptImpl1->intRightHandler();
-        trackballInterruptImpl1->setIntervalFromNow(20);
-    }
+    trackballInterruptImpl1->intRightHandler();
+    trackballInterruptImpl1->setIntervalFromNow(20);
 }
 void TrackballInterruptImpl1::handleIntPressed()
 {
-    if (TB_DIRECTION == RISING || millis() > trackballInterruptImpl1->lastTime + 10) {
-        trackballInterruptImpl1->lastTime = millis();
-        trackballInterruptImpl1->intPressHandler();
-        trackballInterruptImpl1->setIntervalFromNow(20);
-    }
+    trackballInterruptImpl1->intPressHandler();
+    trackballInterruptImpl1->setIntervalFromNow(20);
 }
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -43,10 +43,6 @@
 #include "MessageStore.h"
 #endif

-#ifdef ELECROW_ThinkNode_M5
-PCA9557 io(0x18, &Wire);
-#endif
-
 #ifdef ARCH_ESP32
 #include "freertosinc.h"
 #if !MESHTASTIC_EXCLUDE_WEBSERVER
@@ -77,29 +73,10 @@ NRF52Bluetooth *nrf52Bluetooth = nullptr;
 #include "mqtt/MQTT.h"
 #endif

-#include "LLCC68Interface.h"
-#include "LR1110Interface.h"
-#include "LR1120Interface.h"
-#include "LR1121Interface.h"
-#include "RF95Interface.h"
-#include "SX1262Interface.h"
-#include "SX1268Interface.h"
-#include "SX1280Interface.h"
-#include "detect/LoRaRadioType.h"
-
-#ifdef ARCH_STM32WL
-#include "STM32WLE5JCInterface.h"
-#endif
-
-#if defined(ARCH_PORTDUINO)
-#include "platform/portduino/SimRadio.h"
-#endif
-
 #ifdef ARCH_PORTDUINO
 #include "linux/LinuxHardwareI2C.h"
 #include "mesh/raspihttp/PiWebServer.h"
 #include "platform/portduino/PortduinoGlue.h"
-#include "platform/portduino/USBHal.h"
 #include <cstdlib>
 #include <fstream>
 #include <iostream>
@@ -254,9 +231,6 @@ ScanI2C::DeviceAddress aqi_found = ScanI2C::ADDRESS_NONE;
 Adafruit_DRV2605 drv;
 #endif

-// Global LoRa radio type
-LoRaRadioType radioType = NO_RADIO;
-
 bool isVibrating = false;

 bool eink_found = true;
@@ -293,6 +267,7 @@ const char *getDeviceName()
    return name;
 }

+// TODO remove from main.cpp
 static int32_t ledBlinker()
 {
    // Still set up the blinking (heartbeat) interval but skip code path below, so LED will blink if
@@ -333,6 +308,9 @@ __attribute__((weak, noinline)) bool loopCanSleep()
 void lateInitVariant() __attribute__((weak));
 void lateInitVariant() {}

+void earlyInitVariant() __attribute__((weak));
+void earlyInitVariant() {}
+
 // NRF52 (and probably other platforms) can report when system is in power failure mode
 // (eg. too low battery voltage) and operating it is unsafe (data corruption, bootloops, etc).
 // For example NRF52 will prevent any flash writes in that case automatically
@@ -388,26 +366,14 @@ void setup()
    // boot sequence will follow when battery level raises to safe mode
    waitUntilPowerLevelSafe();

-#if defined(R1_NEO)
-    pinMode(DCDC_EN_HOLD, OUTPUT);
-    digitalWrite(DCDC_EN_HOLD, HIGH);
-    pinMode(NRF_ON, OUTPUT);
-    digitalWrite(NRF_ON, HIGH);
-#endif
+    // Defined in variant.cpp for early init code
+    earlyInitVariant();

 #if defined(PIN_POWER_EN)
    pinMode(PIN_POWER_EN, OUTPUT);
    digitalWrite(PIN_POWER_EN, HIGH);
 #endif

-#if defined(ELECROW_ThinkNode_M5)
-    Wire.begin(48, 47);
-    io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
-    io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
-    io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
-    // io.pinMode(C2_PIN, OUTPUT);
-#endif
-
 #ifdef LED_POWER
    pinMode(LED_POWER, OUTPUT);
    digitalWrite(LED_POWER, LED_STATE_ON);
@@ -432,68 +398,7 @@ void setup()
 #endif
 #endif

-#if defined(T_DECK)
-    // GPIO10 manages all peripheral power supplies
-    // Turn on peripheral power immediately after MUC starts.
-    // If some boards are turned on late, ESP32 will reset due to low voltage.
-    // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
-    // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
-    pinMode(KB_POWERON, OUTPUT);
-    digitalWrite(KB_POWERON, HIGH);
-    // T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
-    // We need to initialize all CS pins in advance otherwise there will be SPI communication issues
-    // e.g. when detecting the SD card
-    pinMode(LORA_CS, OUTPUT);
-    digitalWrite(LORA_CS, HIGH);
-    pinMode(SDCARD_CS, OUTPUT);
-    digitalWrite(SDCARD_CS, HIGH);
-    pinMode(TFT_CS, OUTPUT);
-    digitalWrite(TFT_CS, HIGH);
-    delay(100);
-#elif defined(T_DECK_PRO)
-    pinMode(LORA_EN, OUTPUT);
-    digitalWrite(LORA_EN, HIGH);
-    pinMode(LORA_CS, OUTPUT);
-    digitalWrite(LORA_CS, HIGH);
-    pinMode(SDCARD_CS, OUTPUT);
-    digitalWrite(SDCARD_CS, HIGH);
-    pinMode(PIN_EINK_CS, OUTPUT);
-    digitalWrite(PIN_EINK_CS, HIGH);
-#elif defined(T_LORA_PAGER)
-    pinMode(LORA_CS, OUTPUT);
-    digitalWrite(LORA_CS, HIGH);
-    pinMode(SDCARD_CS, OUTPUT);
-    digitalWrite(SDCARD_CS, HIGH);
-    pinMode(TFT_CS, OUTPUT);
-    digitalWrite(TFT_CS, HIGH);
-    pinMode(KB_INT, INPUT_PULLUP);
-    // io expander
-    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
-    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
-    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_AMP_EN, LOW);
-    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
-    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
-    io.pinMode(EXPANDS_KB_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_KB_EN, HIGH);
-    io.pinMode(EXPANDS_SD_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_SD_EN, HIGH);
-    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
-    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
-#elif defined(HACKADAY_COMMUNICATOR)
-    pinMode(KB_INT, INPUT);
-#endif
-
    concurrency::hasBeenSetup = true;
-#if ARCH_PORTDUINO
-    SPISettings spiSettings(portduino_config.spiSpeed, MSBFIRST, SPI_MODE0);
-#else
-    SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
-#endif

    meshtastic_Config_DisplayConfig_OledType screen_model =
        meshtastic_Config_DisplayConfig_OledType::meshtastic_Config_DisplayConfig_OledType_OLED_AUTO;
@@ -632,6 +537,7 @@ void setup()

    OSThread::setup();

+    // TODO make this ifdef based on defined pins and move from main.cpp
 #if defined(ELECROW_ThinkNode_M1) || defined(ELECROW_ThinkNode_M2)
    // The ThinkNodes have their own blink logic
    // ledPeriodic = new Periodic("Blink", elecrowLedBlinker);
@@ -1009,6 +915,7 @@ void setup()
    }
 #endif // HAS_SCREEN

+    // TODO Remove magic string
    // setup TZ prior to time actions.
 #if !MESHTASTIC_EXCLUDE_TZ
    LOG_DEBUG("Use compiled/slipstreamed %s", slipstreamTZString); // important, removing this clobbers our magic string
@@ -1304,252 +1211,7 @@ void setup()
 #endif
 #endif

-#ifdef ARCH_PORTDUINO
-    // as one can't use a function pointer to the class constructor:
-    auto loraModuleInterface = [](LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
-                                  RADIOLIB_PIN_TYPE busy) {
-        switch (portduino_config.lora_module) {
-        case use_rf95:
-            return (RadioInterface *)new RF95Interface(hal, cs, irq, rst, busy);
-        case use_sx1262:
-            return (RadioInterface *)new SX1262Interface(hal, cs, irq, rst, busy);
-        case use_sx1268:
-            return (RadioInterface *)new SX1268Interface(hal, cs, irq, rst, busy);
-        case use_sx1280:
-            return (RadioInterface *)new SX1280Interface(hal, cs, irq, rst, busy);
-        case use_lr1110:
-            return (RadioInterface *)new LR1110Interface(hal, cs, irq, rst, busy);
-        case use_lr1120:
-            return (RadioInterface *)new LR1120Interface(hal, cs, irq, rst, busy);
-        case use_lr1121:
-            return (RadioInterface *)new LR1121Interface(hal, cs, irq, rst, busy);
-        case use_llcc68:
-            return (RadioInterface *)new LLCC68Interface(hal, cs, irq, rst, busy);
-        case use_simradio:
-            return (RadioInterface *)new SimRadio;
-        default:
-            assert(0); // shouldn't happen
-            return (RadioInterface *)nullptr;
-        }
-    };
-
-    LOG_DEBUG("Activate %s radio on SPI port %s", portduino_config.loraModules[portduino_config.lora_module].c_str(),
-              portduino_config.lora_spi_dev.c_str());
-    if (portduino_config.lora_spi_dev == "ch341") {
-        RadioLibHAL = ch341Hal;
-    } else {
-        RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
-    }
-    rIf =
-        loraModuleInterface((LockingArduinoHal *)RadioLibHAL, portduino_config.lora_cs_pin.pin, portduino_config.lora_irq_pin.pin,
-                            portduino_config.lora_reset_pin.pin, portduino_config.lora_busy_pin.pin);
-
-    if (!rIf->init()) {
-        LOG_WARN("No %s radio", portduino_config.loraModules[portduino_config.lora_module].c_str());
-        delete rIf;
-        rIf = NULL;
-        exit(EXIT_FAILURE);
-    } else {
-        LOG_INFO("%s init success", portduino_config.loraModules[portduino_config.lora_module].c_str());
-    }
-
-#elif defined(HW_SPI1_DEVICE)
-    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI1, spiSettings);
-#else // HW_SPI1_DEVICE
-    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
-#endif
-
-    // radio init MUST BE AFTER service.init, so we have our radio config settings (from nodedb init)
-#if defined(USE_STM32WLx)
-    if (!rIf) {
-        rIf = new STM32WLE5JCInterface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No STM32WL radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("STM32WL init success");
-            radioType = STM32WLx_RADIO;
-        }
-    }
-#endif
-
-#if defined(RF95_IRQ) && RADIOLIB_EXCLUDE_SX127X != 1
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new RF95Interface(RadioLibHAL, LORA_CS, RF95_IRQ, RF95_RESET, RF95_DIO1);
-        if (!rIf->init()) {
-            LOG_WARN("No RF95 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("RF95 init success");
-            radioType = RF95_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && !defined(TCXO_OPTIONAL) && RADIOLIB_EXCLUDE_SX126X != 1
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-#ifdef SX126X_DIO3_TCXO_VOLTAGE
-        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
-#endif
-        if (!sxIf->init()) {
-            LOG_WARN("No SX1262 radio");
-            delete sxIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1262 init success");
-            rIf = sxIf;
-            radioType = SX1262_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && defined(TCXO_OPTIONAL)
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        // try using the specified TCXO voltage
-        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
-        if (!sxIf->init()) {
-            LOG_WARN("No SX1262 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            delete sxIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1262 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            rIf = sxIf;
-            radioType = SX1262_RADIO;
-        }
-    }
-
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        // If specified TCXO voltage fails, attempt to use DIO3 as a reference instead
-        rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No SX1262 radio with XTAL, Vref 0.0V");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1262 init success, XTAL, Vref 0.0V");
-            radioType = SX1262_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1268)
-#if defined(SX126X_DIO3_TCXO_VOLTAGE) && defined(TCXO_OPTIONAL)
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        // try using the specified TCXO voltage
-        auto *sxIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
-        if (!sxIf->init()) {
-            LOG_WARN("No SX1268 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            delete sxIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1268 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
-            rIf = sxIf;
-            radioType = SX1268_RADIO;
-        }
-    }
-#endif
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No SX1268 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1268 init success");
-            radioType = SX1268_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LLCC68)
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new LLCC68Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No LLCC68 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LLCC68 init success");
-            radioType = LLCC68_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LR1110) && RADIOLIB_EXCLUDE_LR11X0 != 1
-    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
-        rIf = new LR1110Interface(RadioLibHAL, LR1110_SPI_NSS_PIN, LR1110_IRQ_PIN, LR1110_NRESET_PIN, LR1110_BUSY_PIN);
-        if (!rIf->init()) {
-            LOG_WARN("No LR1110 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LR1110 init success");
-            radioType = LR1110_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LR1120) && RADIOLIB_EXCLUDE_LR11X0 != 1
-    if (!rIf) {
-        rIf = new LR1120Interface(RadioLibHAL, LR1120_SPI_NSS_PIN, LR1120_IRQ_PIN, LR1120_NRESET_PIN, LR1120_BUSY_PIN);
-        if (!rIf->init()) {
-            LOG_WARN("No LR1120 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LR1120 init success");
-            radioType = LR1120_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_LR1121) && RADIOLIB_EXCLUDE_LR11X0 != 1
-    if (!rIf) {
-        rIf = new LR1121Interface(RadioLibHAL, LR1121_SPI_NSS_PIN, LR1121_IRQ_PIN, LR1121_NRESET_PIN, LR1121_BUSY_PIN);
-        if (!rIf->init()) {
-            LOG_WARN("No LR1121 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("LR1121 init success");
-            radioType = LR1121_RADIO;
-        }
-    }
-#endif
-
-#if defined(USE_SX1280) && RADIOLIB_EXCLUDE_SX128X != 1
-    if (!rIf) {
-        rIf = new SX1280Interface(RadioLibHAL, SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY);
-        if (!rIf->init()) {
-            LOG_WARN("No SX1280 radio");
-            delete rIf;
-            rIf = NULL;
-        } else {
-            LOG_INFO("SX1280 init success");
-            radioType = SX1280_RADIO;
-        }
-    }
-#endif
-
-    // check if the radio chip matches the selected region
-    if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && rIf && (!rIf->wideLora())) {
-        LOG_WARN("LoRa chip does not support 2.4GHz. Revert to unset");
-        config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
-        nodeDB->saveToDisk(SEGMENT_CONFIG);
-
-        if (!rIf->reconfigure()) {
-            LOG_WARN("Reconfigure failed, rebooting");
-            if (screen) {
-                screen->showSimpleBanner("Rebooting...");
-            }
-            rebootAtMsec = millis() + 5000;
-        }
-    }
+    initLoRa();

    lateInitVariant(); // Do board specific init (see extra_variants/README.md for documentation)

@@ -1638,6 +1300,7 @@ bool suppressRebootBanner; // If true, suppress "Rebooting..." overlay (used for
 // This will suppress the current delay and instead try to run ASAP.
 bool runASAP;

+// TODO find better home than main.cpp
 extern meshtastic_DeviceMetadata getDeviceMetadata()
 {
    meshtastic_DeviceMetadata deviceMetadata;
@@ -1738,7 +1401,39 @@ void loop()
    if (inputBroker)
        inputBroker->processInputEventQueue();
 #endif
-#if ARCH_PORTDUINO && HAS_TFT
+#if ARCH_PORTDUINO
+    if (portduino_config.lora_spi_dev == "ch341" && ch341Hal != nullptr) {
+        ch341Hal->checkError();
+    }
+    if (portduino_status.LoRa_in_error && rebootAtMsec == 0) {
+        LOG_ERROR("LoRa in error detected, attempting to recover");
+        if (portduino_config.lora_spi_dev == "ch341") {
+            if (ch341Hal != nullptr) {
+                delete ch341Hal;
+                ch341Hal = nullptr;
+                sleep(3);
+            }
+            try {
+                ch341Hal = new Ch341Hal(0, portduino_config.lora_usb_serial_num, portduino_config.lora_usb_vid,
+                                        portduino_config.lora_usb_pid);
+            } catch (std::exception &e) {
+                std::cerr << e.what() << std::endl;
+                std::cerr << "Could not initialize CH341 device!" << std::endl;
+                exit(EXIT_FAILURE);
+            }
+        }
+        if (initLoRa()) {
+            router->addInterface(rIf);
+            portduino_status.LoRa_in_error = false;
+        } else {
+            LOG_WARN("Reconfigure failed, rebooting");
+            if (screen) {
+                screen->showSimpleBanner("Rebooting...");
+            }
+            rebootAtMsec = millis() + 25;
+        }
+    }
+#if HAS_TFT
    if (screen && portduino_config.displayPanel == x11 &&
        config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
        auto dispdev = screen->getDisplayDevice();
@@ -1746,6 +1441,7 @@ void loop()
            static_cast<TFTDisplay *>(dispdev)->sdlLoop();
    }
 #endif
+#endif
 #if HAS_SCREEN && ENABLE_MESSAGE_PERSISTENCE
    messageStoreAutosaveTick();
 #endif
--- a/src/main.h
+++ b/src/main.h
@@ -26,8 +26,8 @@ extern NRF52Bluetooth *nrf52Bluetooth;
 #if ARCH_PORTDUINO
 extern HardwareSPI *DisplaySPI;
 extern HardwareSPI *LoraSPI;
-
 #endif
+
 extern ScanI2C::DeviceAddress screen_found;
 extern ScanI2C::DeviceAddress cardkb_found;
 extern uint8_t kb_model;
@@ -47,16 +47,16 @@ extern bool isUSBPowered;
 extern Adafruit_DRV2605 drv;
 #endif

+#ifdef HAS_PCA9557
+#include <PCA9557.h>
+extern PCA9557 io;
+#endif
+
 #ifdef HAS_I2S
 #include "AudioThread.h"
 extern AudioThread *audioThread;
 #endif

-#ifdef ELECROW_ThinkNode_M5
-#include <PCA9557.h>
-extern PCA9557 io;
-#endif
-
 #ifdef HAS_UDP_MULTICAST
 #include "mesh/udp/UdpMulticastHandler.h"
 extern UdpMulticastHandler *udpHandler;
--- a/src/mesh/MeshRadio.h
+++ b/src/mesh/MeshRadio.h
@@ -22,4 +22,99 @@ struct RegionInfo {
 extern const RegionInfo regions[];
 extern const RegionInfo *myRegion;

-extern void initRegion();
+extern void initRegion();
+
+static inline float bwCodeToKHz(uint16_t bwCode)
+{
+    if (bwCode == 31)
+        return 31.25f;
+    if (bwCode == 62)
+        return 62.5f;
+    if (bwCode == 200)
+        return 203.125f;
+    if (bwCode == 400)
+        return 406.25f;
+    if (bwCode == 800)
+        return 812.5f;
+    if (bwCode == 1600)
+        return 1625.0f;
+    return (float)bwCode;
+}
+
+static inline uint16_t bwKHzToCode(float bwKHz)
+{
+    if (bwKHz > 31.24f && bwKHz < 31.26f)
+        return 31;
+    if (bwKHz > 62.49f && bwKHz < 62.51f)
+        return 62;
+    if (bwKHz > 203.12f && bwKHz < 203.13f)
+        return 200;
+    if (bwKHz > 406.24f && bwKHz < 406.26f)
+        return 400;
+    if (bwKHz > 812.49f && bwKHz < 812.51f)
+        return 800;
+    if (bwKHz > 1624.99f && bwKHz < 1625.01f)
+        return 1600;
+    return (uint16_t)(bwKHz + 0.5f);
+}
+
+static inline void modemPresetToParams(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora, float &bwKHz, uint8_t &sf,
+                                       uint8_t &cr)
+{
+    switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+        bwKHz = wideLora ? 1625.0f : 500.0f;
+        cr = 5;
+        sf = 7;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 7;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 8;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 9;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 10;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+        bwKHz = wideLora ? 1625.0f : 500.0f;
+        cr = 8;
+        sf = 11;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+        bwKHz = wideLora ? 406.25f : 125.0f;
+        cr = 8;
+        sf = 11;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+        bwKHz = wideLora ? 406.25f : 125.0f;
+        cr = 8;
+        sf = 12;
+        break;
+    default: // LONG_FAST (or illegal)
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 11;
+        break;
+    }
+}
+
+static inline float modemPresetToBwKHz(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora)
+{
+    float bwKHz = 0;
+    uint8_t sf = 0;
+    uint8_t cr = 0;
+    modemPresetToParams(preset, wideLora, bwKHz, sf, cr);
+    return bwKHz;
+}
--- a/src/mesh/NodeDB.cpp
+++ b/src/mesh/NodeDB.cpp
@@ -13,6 +13,7 @@
 #include "PacketHistory.h"
 #include "PowerFSM.h"
 #include "RTC.h"
+#include "RadioInterface.h"
 #include "Router.h"
 #include "SPILock.h"
 #include "SafeFile.h"
@@ -1298,6 +1299,13 @@ void NodeDB::loadFromDisk()
            LOG_INFO("Loaded saved config version %d", config.version);
        }
    }
+
+    // Coerce LoRa config fields derived from presets while bootstrapping.
+    // Some clients/UI components display bandwidth/spread_factor directly from config even in preset mode.
+    if (config.has_lora && config.lora.use_preset) {
+        RadioInterface::bootstrapLoRaConfigFromPreset(config.lora);
+    }
+
    if (backupSecurity.private_key.size > 0) {
        LOG_DEBUG("Restoring backup of security config");
        config.security = backupSecurity;
@@ -2239,7 +2247,10 @@ void recordCriticalError(meshtastic_CriticalErrorCode code, uint32_t address, co

    // Currently portuino is mostly used for simulation.  Make sure the user notices something really bad happened
 #ifdef ARCH_PORTDUINO
-    LOG_ERROR("A critical failure occurred, portduino is exiting");
-    exit(2);
+    LOG_ERROR("A critical failure occurred");
+    // TODO: Determine if other critical errors should also cause an immediate exit
+    if (code == meshtastic_CriticalErrorCode_FLASH_CORRUPTION_RECOVERABLE ||
+        code == meshtastic_CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE)
+        exit(2);
 #endif
 }
--- a/src/mesh/RadioInterface.cpp
+++ b/src/mesh/RadioInterface.cpp
@@ -1,17 +1,36 @@
 #include "RadioInterface.h"
 #include "Channels.h"
 #include "DisplayFormatters.h"
+#include "LLCC68Interface.h"
+#include "LR1110Interface.h"
+#include "LR1120Interface.h"
+#include "LR1121Interface.h"
 #include "MeshRadio.h"
 #include "MeshService.h"
 #include "NodeDB.h"
+#include "RF95Interface.h"
 #include "Router.h"
+#include "SX1262Interface.h"
+#include "SX1268Interface.h"
+#include "SX1280Interface.h"
 #include "configuration.h"
+#include "detect/LoRaRadioType.h"
 #include "main.h"
 #include "sleep.h"
 #include <assert.h>
 #include <pb_decode.h>
 #include <pb_encode.h>

+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#include "platform/portduino/SimRadio.h"
+#include "platform/portduino/USBHal.h"
+#endif
+
+#ifdef ARCH_STM32WL>
+#include "STM32WLE5JCInterface.h"
+#endif
+
 // Calculate 2^n without calling pow()
 uint32_t pow_of_2(uint32_t n)
 {
@@ -205,6 +224,281 @@ bool RadioInterface::uses_default_frequency_slot = true;

 static uint8_t bytes[MAX_LORA_PAYLOAD_LEN + 1];

+// Global LoRa radio type
+LoRaRadioType radioType = NO_RADIO;
+
+extern RadioInterface *rIf;
+extern RadioLibHal *RadioLibHAL;
+#if defined(HW_SPI1_DEVICE) && defined(ARCH_ESP32)
+extern SPIClass SPI1;
+#endif
+
+bool initLoRa()
+{
+    if (rIf != nullptr) {
+        delete rIf;
+        rIf = nullptr;
+    }
+
+#if ARCH_PORTDUINO
+    SPISettings spiSettings(portduino_config.spiSpeed, MSBFIRST, SPI_MODE0);
+#else
+    SPISettings spiSettings(4000000, MSBFIRST, SPI_MODE0);
+#endif
+
+#ifdef ARCH_PORTDUINO
+    // as one can't use a function pointer to the class constructor:
+    auto loraModuleInterface = [](LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
+                                  RADIOLIB_PIN_TYPE busy) {
+        switch (portduino_config.lora_module) {
+        case use_rf95:
+            return (RadioInterface *)new RF95Interface(hal, cs, irq, rst, busy);
+        case use_sx1262:
+            return (RadioInterface *)new SX1262Interface(hal, cs, irq, rst, busy);
+        case use_sx1268:
+            return (RadioInterface *)new SX1268Interface(hal, cs, irq, rst, busy);
+        case use_sx1280:
+            return (RadioInterface *)new SX1280Interface(hal, cs, irq, rst, busy);
+        case use_lr1110:
+            return (RadioInterface *)new LR1110Interface(hal, cs, irq, rst, busy);
+        case use_lr1120:
+            return (RadioInterface *)new LR1120Interface(hal, cs, irq, rst, busy);
+        case use_lr1121:
+            return (RadioInterface *)new LR1121Interface(hal, cs, irq, rst, busy);
+        case use_llcc68:
+            return (RadioInterface *)new LLCC68Interface(hal, cs, irq, rst, busy);
+        case use_simradio:
+            return (RadioInterface *)new SimRadio;
+        default:
+            assert(0); // shouldn't happen
+            return (RadioInterface *)nullptr;
+        }
+    };
+
+    LOG_DEBUG("Activate %s radio on SPI port %s", portduino_config.loraModules[portduino_config.lora_module].c_str(),
+              portduino_config.lora_spi_dev.c_str());
+    if (portduino_config.lora_spi_dev == "ch341") {
+        RadioLibHAL = ch341Hal;
+    } else {
+        if (RadioLibHAL != nullptr) {
+            delete RadioLibHAL;
+            RadioLibHAL = nullptr;
+        }
+        RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+    }
+    rIf =
+        loraModuleInterface((LockingArduinoHal *)RadioLibHAL, portduino_config.lora_cs_pin.pin, portduino_config.lora_irq_pin.pin,
+                            portduino_config.lora_reset_pin.pin, portduino_config.lora_busy_pin.pin);
+
+    if (!rIf->init()) {
+        LOG_WARN("No %s radio", portduino_config.loraModules[portduino_config.lora_module].c_str());
+        delete rIf;
+        rIf = NULL;
+        exit(EXIT_FAILURE);
+    } else {
+        LOG_INFO("%s init success", portduino_config.loraModules[portduino_config.lora_module].c_str());
+    }
+
+#elif defined(HW_SPI1_DEVICE)
+    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI1, spiSettings);
+#else // HW_SPI1_DEVICE
+    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
+#endif
+
+// radio init MUST BE AFTER service.init, so we have our radio config settings (from nodedb init)
+#if defined(USE_STM32WLx)
+    if (!rIf) {
+        rIf = new STM32WLE5JCInterface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No STM32WL radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("STM32WL init success");
+            radioType = STM32WLx_RADIO;
+        }
+    }
+#endif
+
+#if defined(RF95_IRQ) && RADIOLIB_EXCLUDE_SX127X != 1
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new RF95Interface(RadioLibHAL, LORA_CS, RF95_IRQ, RF95_RESET, RF95_DIO1);
+        if (!rIf->init()) {
+            LOG_WARN("No RF95 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("RF95 init success");
+            radioType = RF95_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && !defined(TCXO_OPTIONAL) && RADIOLIB_EXCLUDE_SX126X != 1
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
+#endif
+        if (!sxIf->init()) {
+            LOG_WARN("No SX1262 radio");
+            delete sxIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1262 init success");
+            rIf = sxIf;
+            radioType = SX1262_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && defined(TCXO_OPTIONAL)
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        // try using the specified TCXO voltage
+        auto *sxIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
+        if (!sxIf->init()) {
+            LOG_WARN("No SX1262 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            delete sxIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1262 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            rIf = sxIf;
+            radioType = SX1262_RADIO;
+        }
+    }
+
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        // If specified TCXO voltage fails, attempt to use DIO3 as a reference instead
+        rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No SX1262 radio with XTAL, Vref 0.0V");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1262 init success, XTAL, Vref 0.0V");
+            radioType = SX1262_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1268)
+#if defined(SX126X_DIO3_TCXO_VOLTAGE) && defined(TCXO_OPTIONAL)
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        // try using the specified TCXO voltage
+        auto *sxIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        sxIf->setTCXOVoltage(SX126X_DIO3_TCXO_VOLTAGE);
+        if (!sxIf->init()) {
+            LOG_WARN("No SX1268 radio with TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            delete sxIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1268 init success, TCXO, Vref %fV", SX126X_DIO3_TCXO_VOLTAGE);
+            rIf = sxIf;
+            radioType = SX1268_RADIO;
+        }
+    }
+#endif
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No SX1268 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1268 init success");
+            radioType = SX1268_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LLCC68)
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new LLCC68Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No LLCC68 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LLCC68 init success");
+            radioType = LLCC68_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1110) && RADIOLIB_EXCLUDE_LR11X0 != 1
+    if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) {
+        rIf = new LR1110Interface(RadioLibHAL, LR1110_SPI_NSS_PIN, LR1110_IRQ_PIN, LR1110_NRESET_PIN, LR1110_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("No LR1110 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1110 init success");
+            radioType = LR1110_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1120) && RADIOLIB_EXCLUDE_LR11X0 != 1
+    if (!rIf) {
+        rIf = new LR1120Interface(RadioLibHAL, LR1120_SPI_NSS_PIN, LR1120_IRQ_PIN, LR1120_NRESET_PIN, LR1120_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("No LR1120 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1120 init success");
+            radioType = LR1120_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_LR1121) && RADIOLIB_EXCLUDE_LR11X0 != 1
+    if (!rIf) {
+        rIf = new LR1121Interface(RadioLibHAL, LR1121_SPI_NSS_PIN, LR1121_IRQ_PIN, LR1121_NRESET_PIN, LR1121_BUSY_PIN);
+        if (!rIf->init()) {
+            LOG_WARN("No LR1121 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("LR1121 init success");
+            radioType = LR1121_RADIO;
+        }
+    }
+#endif
+
+#if defined(USE_SX1280) && RADIOLIB_EXCLUDE_SX128X != 1
+    if (!rIf) {
+        rIf = new SX1280Interface(RadioLibHAL, SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("No SX1280 radio");
+            delete rIf;
+            rIf = NULL;
+        } else {
+            LOG_INFO("SX1280 init success");
+            radioType = SX1280_RADIO;
+        }
+    }
+#endif
+
+    // check if the radio chip matches the selected region
+    if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && rIf && (!rIf->wideLora())) {
+        LOG_WARN("LoRa chip does not support 2.4GHz. Revert to unset");
+        config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET;
+        nodeDB->saveToDisk(SEGMENT_CONFIG);
+
+        if (rIf && !rIf->reconfigure()) {
+            LOG_WARN("Reconfigure failed, rebooting");
+            if (screen) {
+                screen->showSimpleBanner("Rebooting...");
+            }
+            rebootAtMsec = millis() + 5000;
+        }
+    }
+    return rIf != nullptr;
+}
+
 void initRegion()
 {
    const RegionInfo *r = regions;
@@ -220,6 +514,34 @@ void initRegion()
    myRegion = r;
 }

+void RadioInterface::bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig)
+{
+    if (!loraConfig.use_preset) {
+        return;
+    }
+
+    // Find region info to determine whether "wide" LoRa is permitted (2.4 GHz uses wider bandwidth codes).
+    const RegionInfo *r = regions;
+    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != loraConfig.region; r++)
+        ;
+
+    const bool regionWideLora = r->wideLora;
+
+    float bwKHz = 0;
+    uint8_t sf = 0;
+    uint8_t cr = 0;
+    modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
+
+    // If selected preset requests a bandwidth larger than the region span, fall back to LONG_FAST.
+    if (r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && (r->freqEnd - r->freqStart) < (bwKHz / 1000.0f)) {
+        loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
+        modemPresetToParams(loraConfig.modem_preset, regionWideLora, bwKHz, sf, cr);
+    }
+
+    loraConfig.bandwidth = bwKHzToCode(bwKHz);
+    loraConfig.spread_factor = sf;
+}
+
 /**
 * ## LoRaWAN for North America

@@ -474,54 +796,7 @@ void RadioInterface::applyModemConfig()
    bool validConfig = false; // We need to check for a valid configuration
    while (!validConfig) {
        if (loraConfig.use_preset) {
-
-            switch (loraConfig.modem_preset) {
-            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-                bw = (myRegion->wideLora) ? 1625.0 : 500;
-                cr = 5;
-                sf = 7;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 7;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 8;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 9;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 10;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-                bw = (myRegion->wideLora) ? 1625.0 : 500;
-                cr = 8;
-                sf = 11;
-                break;
-            default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 11;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
-                bw = (myRegion->wideLora) ? 406.25 : 125;
-                cr = 8;
-                sf = 11;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
-                bw = (myRegion->wideLora) ? 406.25 : 125;
-                cr = 8;
-                sf = 12;
-                break;
-            }
+            modemPresetToParams(loraConfig.modem_preset, myRegion->wideLora, bw, sf, cr);
            if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
                cr = loraConfig.coding_rate;
                LOG_INFO("Using custom Coding Rate %u", cr);
@@ -529,20 +804,7 @@ void RadioInterface::applyModemConfig()
        } else {
            sf = loraConfig.spread_factor;
            cr = loraConfig.coding_rate;
-            bw = loraConfig.bandwidth;
-
-            if (bw == 31) // This parameter is not an integer
-                bw = 31.25;
-            if (bw == 62) // Fix for 62.5Khz bandwidth
-                bw = 62.5;
-            if (bw == 200)
-                bw = 203.125;
-            if (bw == 400)
-                bw = 406.25;
-            if (bw == 800)
-                bw = 812.5;
-            if (bw == 1600)
-                bw = 1625.0;
+            bw = bwCodeToKHz(loraConfig.bandwidth);
        }

        if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {
--- a/src/mesh/RadioInterface.h
+++ b/src/mesh/RadioInterface.h
@@ -7,6 +7,9 @@
 #include "airtime.h"
 #include "error.h"

+// Forward decl to avoid a direct include of generated config headers / full LoRaConfig definition in this widely-included file.
+typedef struct _meshtastic_Config_LoRaConfig meshtastic_Config_LoRaConfig;
+
 #define MAX_TX_QUEUE 16 // max number of packets which can be waiting for transmission

 #define MAX_LORA_PAYLOAD_LEN 255 // max length of 255 per Semtech's datasheets on SX12xx
@@ -115,6 +118,12 @@ class RadioInterface

    virtual ~RadioInterface() {}

+    /**
+     * Coerce LoRa config fields (bandwidth/spread_factor) derived from presets.
+     * This is used during early bootstrapping so UIs that display these fields directly remain consistent.
+     */
+    static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig);
+
    /**
     * Return true if we think the board can go to sleep (i.e. our tx queue is empty, we are not sending or receiving)
     *
@@ -270,5 +279,7 @@ class RadioInterface
    }
 };

+bool initLoRa();
+
 /// Debug printing for packets
 void printPacket(const char *prefix, const meshtastic_MeshPacket *p);
--- a/src/mesh/Router.cpp
+++ b/src/mesh/Router.cpp
@@ -7,7 +7,6 @@
 #include "RTC.h"

 #include "configuration.h"
-#include "detect/LoRaRadioType.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "meshUtils.h"
--- a/src/mesh/SX126xInterface.cpp
+++ b/src/mesh/SX126xInterface.cpp
@@ -269,8 +269,12 @@ template <typename T> void SX126xInterface<T>::setStandby()

    if (err != RADIOLIB_ERR_NONE)
        LOG_DEBUG("SX126x standby %s%d", radioLibErr, err);
+#ifdef ARCH_PORTDUINO
+    if (err != RADIOLIB_ERR_NONE)
+        portduino_status.LoRa_in_error = true;
+#else
    assert(err == RADIOLIB_ERR_NONE);
-
+#endif
    isReceiving = false; // If we were receiving, not any more
    activeReceiveStart = 0;
    disableInterrupt();
@@ -313,7 +317,12 @@ template <typename T> void SX126xInterface<T>::startReceive()
    int err = lora.startReceiveDutyCycleAuto(preambleLength, 8, MESHTASTIC_RADIOLIB_IRQ_RX_FLAGS);
    if (err != RADIOLIB_ERR_NONE)
        LOG_ERROR("SX126X startReceiveDutyCycleAuto %s%d", radioLibErr, err);
+#ifdef ARCH_PORTDUINO
+    if (err != RADIOLIB_ERR_NONE)
+        portduino_status.LoRa_in_error = true;
+#else
    assert(err == RADIOLIB_ERR_NONE);
+#endif

    RadioLibInterface::startReceive();

@@ -341,7 +350,12 @@ template <typename T> bool SX126xInterface<T>::isChannelActive()
        return true;
    if (result != RADIOLIB_CHANNEL_FREE)
        LOG_ERROR("SX126X scanChannel %s%d", radioLibErr, result);
+#ifdef ARCH_PORTDUINO
+    if (result == RADIOLIB_ERR_WRONG_MODEM)
+        portduino_status.LoRa_in_error = true;
+#else
    assert(result != RADIOLIB_ERR_WRONG_MODEM);
+#endif

    return false;
 }
--- a/src/mqtt/MQTT.cpp
+++ b/src/mqtt/MQTT.cpp
@@ -475,8 +475,10 @@ bool MQTT::publish(const char *topic, const char *payload, bool retained)
    if (moduleConfig.mqtt.proxy_to_client_enabled) {
        meshtastic_MqttClientProxyMessage *msg = mqttClientProxyMessagePool.allocZeroed();
        msg->which_payload_variant = meshtastic_MqttClientProxyMessage_text_tag;
-        strcpy(msg->topic, topic);
-        strcpy(msg->payload_variant.text, payload);
+        strncpy(msg->topic, topic, sizeof(msg->topic));
+        msg->topic[sizeof(msg->topic) - 1] = '\0';
+        strncpy(msg->payload_variant.text, payload, sizeof(msg->payload_variant.text));
+        msg->payload_variant.text[sizeof(msg->payload_variant.text) - 1] = '\0';
        msg->retained = retained;
        service->sendMqttMessageToClientProxy(msg);
        return true;
--- a/src/platform/extra_variants/README.md
+++ b/src/platform/extra_variants/README.md
@@ -5,7 +5,7 @@ This directory tree is designed to solve two problems.
 - The ESP32 arduino/platformio project doesn't support the nice "if initVariant() is found, call that after init" behavior of the nrf52 builds (they use initVariant() internally).
 - Over the years a lot of 'board specific' init code has been added to init() in main.cpp. It would be great to have a general/clean mechanism to allow developers to specify board specific/unique code in a clean fashion without mucking in main.

-So we are borrowing the initVariant() ideas here (by using weak gcc references). You can now define lateInitVariant() if your board needs it.
+So we are borrowing the initVariant() ideas here (by using weak gcc references). You can now define earlyInitVariant() and lateInitVariant() if your board needs them. earlyInitVariant() runs at the beginning of setup() directly after waitUntilPowerLevelSafe(); while lateInitVariant() runs after the LoRa radio is initialized.

 If you'd like a board specific variant to be run, add the variant.cpp file to an appropriately named
 subdirectory and check for \_VARIANT_boardname in the cpp file (so that your code is only built for your board).
--- a/src/platform/nrf52/main-nrf52.cpp
+++ b/src/platform/nrf52/main-nrf52.cpp
@@ -430,15 +430,6 @@ void cpuDeepSleep(uint32_t msecToWake)
        Serial1.end();
 #endif

-#ifdef TTGO_T_ECHO
-    // To power off the T-Echo, the display must be set
-    // as an input pin; otherwise, there will be leakage current.
-    pinMode(PIN_EINK_CS, INPUT);
-    pinMode(PIN_EINK_DC, INPUT);
-    pinMode(PIN_EINK_RES, INPUT);
-    pinMode(PIN_EINK_BUSY, INPUT);
-#endif
-
    setBluetoothEnable(false);

 #ifdef RAK4630
@@ -449,57 +440,8 @@ void cpuDeepSleep(uint32_t msecToWake)
    // RAK-12039 set pin for Air quality sensor
    digitalWrite(AQ_SET_PIN, LOW);
 #endif
-#ifdef RAK14014
-    // GPIO restores input status, otherwise there will be leakage current
-    nrf_gpio_cfg_default(TFT_BL);
-    nrf_gpio_cfg_default(TFT_DC);
-    nrf_gpio_cfg_default(TFT_CS);
-    nrf_gpio_cfg_default(TFT_SCLK);
-    nrf_gpio_cfg_default(TFT_MOSI);
-    nrf_gpio_cfg_default(TFT_MISO);
-    nrf_gpio_cfg_default(SCREEN_TOUCH_INT);
-    nrf_gpio_cfg_default(WB_I2C1_SCL);
-    nrf_gpio_cfg_default(WB_I2C1_SDA);
-
-    // nrf_gpio_cfg_default(WB_I2C2_SCL);
-    // nrf_gpio_cfg_default(WB_I2C2_SDA);
-#endif
-#endif
-#ifdef MESHLINK
-#ifdef PIN_WD_EN
-    digitalWrite(PIN_WD_EN, LOW);
-#endif
-#endif
-
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_MESH_SOLAR)
-    nrf_gpio_cfg_default(PIN_GPS_PPS);
-    detachInterrupt(PIN_GPS_PPS);
-    detachInterrupt(PIN_BUTTON1);
-#endif
-
-#ifdef ELECROW_ThinkNode_M1
-    for (int pin = 0; pin < 48; pin++) {
-        if (pin == 17 || pin == 19 || pin == 20 || pin == 22 || pin == 23 || pin == 24 || pin == 25 || pin == 9 || pin == 10 ||
-            pin == PIN_BUTTON1 || pin == PIN_BUTTON2) {
-            continue;
-        }
-        pinMode(pin, OUTPUT);
-    }
-    for (int pin = 0; pin < 48; pin++) {
-        if (pin == 17 || pin == 19 || pin == 20 || pin == 22 || pin == 23 || pin == 24 || pin == 25 || pin == 9 || pin == 10 ||
-            pin == PIN_BUTTON1 || pin == PIN_BUTTON2) {
-            continue;
-        }
-        digitalWrite(pin, LOW);
-    }
-    for (int pin = 0; pin < 48; pin++) {
-        if (pin == 17 || pin == 19 || pin == 20 || pin == 22 || pin == 23 || pin == 24 || pin == 25 || pin == 9 || pin == 10 ||
-            pin == PIN_BUTTON1 || pin == PIN_BUTTON2) {
-            continue;
-        }
-        NRF_GPIO->DIRCLR = (1 << pin);
-    }
 #endif
+    // Run shutdown code if specified in variant.cpp
    variant_shutdown();

    // Sleepy trackers or sensors can low power "sleep"
--- a/src/platform/portduino/PortduinoGlue.cpp
+++ b/src/platform/portduino/PortduinoGlue.cpp
@@ -29,6 +29,7 @@
 #include "platform/portduino/USBHal.h"

 portduino_config_struct portduino_config;
+portduino_status_struct portduino_status;
 std::ofstream traceFile;
 std::ofstream JSONFile;
 Ch341Hal *ch341Hal = nullptr;
@@ -400,6 +401,10 @@ void portduinoSetup()
                if (found_hat) {
                    product_config =
                        cleanupNameForAutoconf("lora-hat-" + std::string(hat_vendor) + "-" + autoconf_product + ".yaml");
+                    if (strncmp(hat_vendor, "RAK", 14) == 0 && strncmp(autoconf_product, "6421 Pi Hat", 14) == 0) {
+                        std::cout << "autoconf: Setting hardwareModel to RAK6421" << std::endl;
+                        portduino_status.hardwareModel = meshtastic_HardwareModel_RAK6421;
+                    }
                } else if (found_ch341) {
                    product_config = cleanupNameForAutoconf("lora-usb-" + std::string(autoconf_product) + ".yaml");
                    // look for more data after the null terminator
@@ -408,6 +413,10 @@ void portduinoSetup()
                        memcpy(portduino_config.device_id, autoconf_product + len + 1, 16);
                        if (!memfll(portduino_config.device_id, '\0', 16) && !memfll(portduino_config.device_id, 0xff, 16)) {
                            portduino_config.has_device_id = true;
+                            if (strncmp(autoconf_product, "MESHSTICK 1262", 14) == 0) {
+                                std::cout << "autoconf: Setting hardwareModel to Meshstick 1262" << std::endl;
+                                portduino_status.hardwareModel = meshtastic_HardwareModel_MESHSTICK_1262;
+                            }
                        }
                    }
                }
--- a/src/platform/portduino/PortduinoGlue.h
+++ b/src/platform/portduino/PortduinoGlue.h
@@ -1,15 +1,22 @@
 #pragma once
 #include <fstream>
 #include <map>
+#include <unistd.h>
 #include <unordered_map>
 #include <vector>

 #include "LR11x0Interface.h"
 #include "Module.h"
 #include "mesh/generated/meshtastic/mesh.pb.h"
-#include "platform/portduino/USBHal.h"
 #include "yaml-cpp/yaml.h"

+extern struct portduino_status_struct {
+    bool LoRa_in_error = false;
+    _meshtastic_HardwareModel hardwareModel = meshtastic_HardwareModel_PORTDUINO;
+} portduino_status;
+
+#include "platform/portduino/USBHal.h"
+
 // Product strings for auto-configuration
 // {"PRODUCT_STRING", "CONFIG.YAML"}
 // YAML paths are relative to `meshtastic/available.d`
--- a/src/platform/portduino/USBHal.h
+++ b/src/platform/portduino/USBHal.h
@@ -9,6 +9,8 @@
 #include <libpinedio-usb.h>
 #include <unistd.h>

+extern uint32_t rebootAtMsec;
+
 // include the library for Raspberry GPIO pins

 #define PI_RISING (PINEDIO_INT_MODE_RISING)
@@ -45,7 +47,7 @@ class Ch341Hal : public RadioLibHal
        int32_t ret = pinedio_init(&pinedio, NULL);
        if (ret != 0) {
            std::string s = "Could not open SPI: ";
-            throw(s + std::to_string(ret));
+            throw std::runtime_error(s + std::to_string(ret));
        }

        pinedio_set_option(&pinedio, PINEDIO_OPTION_AUTO_CS, 0);
@@ -74,30 +76,55 @@ class Ch341Hal : public RadioLibHal
    // RADIOLIB_NC as an alias for non-connected pins
    void pinMode(uint32_t pin, uint32_t mode) override
    {
+        if (checkError()) {
+            return;
+        }
        if (pin == RADIOLIB_NC) {
            return;
        }
-        pinedio_set_pin_mode(&pinedio, pin, mode);
+        auto res = pinedio_set_pin_mode(&pinedio, pin, mode);
+        if (res < 0 && rebootAtMsec == 0) {
+            LOG_ERROR("USBHal pinMode: Could not set pin %d mode to %d: %d", pin, mode, res);
+        }
    }

    void digitalWrite(uint32_t pin, uint32_t value) override
    {
+        if (checkError()) {
+            return;
+        }
        if (pin == RADIOLIB_NC) {
            return;
        }
-        pinedio_digital_write(&pinedio, pin, value);
+        auto res = pinedio_digital_write(&pinedio, pin, value);
+        if (res < 0 && rebootAtMsec == 0) {
+            LOG_ERROR("USBHal digitalWrite: Could not write pin %d: %d", pin, res);
+            portduino_status.LoRa_in_error = true;
+        }
    }

    uint32_t digitalRead(uint32_t pin) override
    {
+        if (checkError()) {
+            return 0;
+        }
        if (pin == RADIOLIB_NC) {
            return 0;
        }
-        return pinedio_digital_read(&pinedio, pin);
+        auto res = pinedio_digital_read(&pinedio, pin);
+        if (res < 0 && rebootAtMsec == 0) {
+            LOG_ERROR("USBHal digitalRead: Could not read pin %d: %d", pin, res);
+            portduino_status.LoRa_in_error = true;
+            return 0;
+        }
+        return res;
    }

    void attachInterrupt(uint32_t interruptNum, void (*interruptCb)(void), uint32_t mode) override
    {
+        if (checkError()) {
+            return;
+        }
        if (interruptNum == RADIOLIB_NC) {
            return;
        }
@@ -107,6 +134,9 @@ class Ch341Hal : public RadioLibHal

    void detachInterrupt(uint32_t interruptNum) override
    {
+        if (checkError()) {
+            return;
+        }
        if (interruptNum == RADIOLIB_NC) {
            return;
        }
@@ -152,6 +182,9 @@ class Ch341Hal : public RadioLibHal

    void spiTransfer(uint8_t *out, size_t len, uint8_t *in)
    {
+        if (checkError()) {
+            return;
+        }
        int32_t ret = pinedio_transceive(&this->pinedio, out, in, len);
        if (ret < 0) {
            std::cerr << "Could not perform SPI transfer: " << ret << std::endl;
@@ -160,9 +193,22 @@ class Ch341Hal : public RadioLibHal

    void spiEndTransaction() {}
    void spiEnd() {}
+    bool checkError()
+    {
+        if (pinedio.in_error) {
+            if (!has_warned)
+                LOG_ERROR("USBHal: libch341 in_error detected");
+            portduino_status.LoRa_in_error = true;
+            has_warned = true;
+            return true;
+        }
+        has_warned = false;
+        return false;
+    }

  private:
    pinedio_inst pinedio = {0};
+    bool has_warned = false;
 };

 #endif
--- a/src/platform/portduino/architecture.h
+++ b/src/platform/portduino/architecture.h
@@ -6,7 +6,7 @@
 // set HW_VENDOR
 //

-#define HW_VENDOR meshtastic_HardwareModel_PORTDUINO
+#define HW_VENDOR portduino_status.hardwareModel

 #ifndef HAS_BUTTON
 #define HAS_BUTTON 1
--- a/test/test_radio/test_main.cpp
+++ b/test/test_radio/test_main.cpp
@@ -0,0 +1,100 @@
+#include "MeshRadio.h"
+#include "RadioInterface.h"
+#include "TestUtil.h"
+#include <unity.h>
+
+#include "meshtastic/config.pb.h"
+
+static void test_bwCodeToKHz_specialMappings()
+{
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 31.25f, bwCodeToKHz(31));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 62.5f, bwCodeToKHz(62));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 203.125f, bwCodeToKHz(200));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 406.25f, bwCodeToKHz(400));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 812.5f, bwCodeToKHz(800));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 1625.0f, bwCodeToKHz(1600));
+}
+
+static void test_bwCodeToKHz_passthrough()
+{
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 125.0f, bwCodeToKHz(125));
+    TEST_ASSERT_FLOAT_WITHIN(0.0001f, 250.0f, bwCodeToKHz(250));
+}
+
+static void test_bootstrapLoRaConfigFromPreset_noopWhenUsePresetFalse()
+{
+    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
+    cfg.use_preset = false;
+    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
+    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
+    cfg.bandwidth = 123;
+    cfg.spread_factor = 8;
+
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL_UINT16(123, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(8, cfg.spread_factor);
+    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST, cfg.modem_preset);
+}
+
+static void test_bootstrapLoRaConfigFromPreset_setsDerivedFields_nonWideRegion()
+{
+    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
+    cfg.use_preset = true;
+    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_US;
+    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
+
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL_UINT16(250, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(9, cfg.spread_factor);
+}
+
+static void test_bootstrapLoRaConfigFromPreset_setsDerivedFields_wideRegion()
+{
+    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
+    cfg.use_preset = true;
+    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_LORA_24;
+    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
+
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL_UINT16(800, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(9, cfg.spread_factor);
+}
+
+static void test_bootstrapLoRaConfigFromPreset_fallsBackIfBandwidthExceedsRegionSpan()
+{
+    meshtastic_Config_LoRaConfig cfg = meshtastic_Config_LoRaConfig_init_zero;
+    cfg.use_preset = true;
+    cfg.region = meshtastic_Config_LoRaConfig_RegionCode_EU_868;
+    cfg.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
+
+    RadioInterface::bootstrapLoRaConfigFromPreset(cfg);
+
+    TEST_ASSERT_EQUAL(meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST, cfg.modem_preset);
+    TEST_ASSERT_EQUAL_UINT16(250, cfg.bandwidth);
+    TEST_ASSERT_EQUAL_UINT32(11, cfg.spread_factor);
+}
+
+void setUp(void) {}
+void tearDown(void) {}
+
+void setup()
+{
+    delay(10);
+    delay(2000);
+
+    initializeTestEnvironment();
+
+    UNITY_BEGIN();
+    RUN_TEST(test_bwCodeToKHz_specialMappings);
+    RUN_TEST(test_bwCodeToKHz_passthrough);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_noopWhenUsePresetFalse);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_setsDerivedFields_nonWideRegion);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_setsDerivedFields_wideRegion);
+    RUN_TEST(test_bootstrapLoRaConfigFromPreset_fallsBackIfBandwidthExceedsRegionSpan);
+    exit(UNITY_END());
+}
+
+void loop() {}
--- a/variants/esp32/esp32-common.ini
+++ b/variants/esp32/esp32-common.ini
@@ -59,13 +59,13 @@ lib_deps =
  ${environmental_extra.lib_deps}
  ${radiolib_base.lib_deps}
  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
  h2zero/NimBLE-Arduino@^1.4.3
  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
  rweather/Crypto@0.4.0

--- a/variants/esp32/esp32.ini
+++ b/variants/esp32/esp32.ini
@@ -17,12 +17,12 @@ lib_deps =
  ${environmental_extra_no_bsec.lib_deps}
  ${radiolib_base.lib_deps}
  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
  h2zero/NimBLE-Arduino@^1.4.3
  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
  rweather/Crypto@0.4.0
--- a/variants/esp32/m5stack_coreink/platformio.ini
+++ b/variants/esp32/m5stack_coreink/platformio.ini
@@ -19,9 +19,9 @@ build_flags =
 lib_deps = 
  ${esp32_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 lib_ignore =
  m5stack-coreink
 monitor_filters = esp32_exception_decoder
--- a/variants/esp32/tbeam/platformio.ini
+++ b/variants/esp32/tbeam/platformio.ini
@@ -32,4 +32,4 @@ lib_deps =
  # renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
  https://github.com/meshtastic/st7796/archive/1.0.5.zip
  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
--- a/variants/esp32c6/esp32c6.ini
+++ b/variants/esp32c6/esp32c6.ini
@@ -28,7 +28,7 @@ lib_deps =
  ${environmental_extra.lib_deps}
  ${radiolib_base.lib_deps}
  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
+  lewisxhe/XPowersLib@0.3.3
  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
@@ -11,6 +11,10 @@ custom_meshtastic_requires_dfu = false

 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/ELECROW-ThinkNode-M5>
+
 build_flags =
  ${esp32s3_base.build_flags}
  -D ELECROW_ThinkNode_M5
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp
@@ -0,0 +1,12 @@
+#include "variant.h"
+#include <PCA9557.h>
+
+PCA9557 io(0x18, &Wire);
+
+void earlyInitVariant()
+{
+    Wire.begin(48, 47);
+    io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
+    io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
+    io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
+}
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
@@ -4,6 +4,8 @@
 #define UART_TX 43
 #define UART_RX 44

+#define HAS_PCA9557
+
 // LED
 // Both of these are on the GPIO expander
 #define PCA_LED_USER 1  // the Blue LED
--- a/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+++ b/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
--- a/variants/esp32s3/esp32-s3-pico/platformio.ini
+++ b/variants/esp32s3/esp32-s3-pico/platformio.ini
@@ -23,6 +23,6 @@ build_flags = ${esp32s3_base.build_flags}

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32s3/hackaday-communicator/platformio.ini
+++ b/variants/esp32s3/hackaday-communicator/platformio.ini
@@ -6,6 +6,10 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/hackaday-communicator>
+
 build_flags = ${esp32s3_base.build_flags} 
  -D HACKADAY_COMMUNICATOR
  -D BOARD_HAS_PSRAM
@@ -13,4 +17,4 @@ build_flags = ${esp32s3_base.build_flags}

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=git-refs depName=meshtastic-Arduino_GFX packageName=https://github.com/meshtastic/Arduino_GFX gitBranch=master
-  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
+  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
--- a/variants/esp32s3/hackaday-communicator/variant.cpp
+++ b/variants/esp32s3/hackaday-communicator/variant.cpp
@@ -0,0 +1,6 @@
+#include "variant.h"
+#include "Arduino.h"
+void earlyInitVariant()
+{
+    pinMode(KB_INT, INPUT);
+}
--- a/variants/esp32s3/t-deck-pro/platformio.ini
+++ b/variants/esp32s3/t-deck-pro/platformio.ini
@@ -15,6 +15,10 @@ board = t-deck-pro
 board_check = true
 upload_protocol = esptool

+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/t-deck-pro>
+
 build_flags = 
  ${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro
  -D T_DECK_PRO
@@ -29,7 +33,7 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
  https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
  # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
--- a/variants/esp32s3/t-deck-pro/variant.cpp
+++ b/variants/esp32s3/t-deck-pro/variant.cpp
@@ -0,0 +1,14 @@
+#include "variant.h"
+#include "Arduino.h"
+
+void earlyInitVariant()
+{
+    pinMode(LORA_EN, OUTPUT);
+    digitalWrite(LORA_EN, HIGH);
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(PIN_EINK_CS, OUTPUT);
+    digitalWrite(PIN_EINK_CS, HIGH);
+}
--- a/variants/esp32s3/t-deck/platformio.ini
+++ b/variants/esp32s3/t-deck/platformio.ini
@@ -17,6 +17,10 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/t-deck>
+
 build_flags = ${esp32s3_base.build_flags} 
  -D T_DECK 
  -D BOARD_HAS_PSRAM
--- a/variants/esp32s3/t-deck/variant.cpp
+++ b/variants/esp32s3/t-deck/variant.cpp
@@ -0,0 +1,23 @@
+#include "variant.h"
+#include "Arduino.h"
+
+void earlyInitVariant()
+{
+    // GPIO10 manages all peripheral power supplies
+    // Turn on peripheral power immediately after MUC starts.
+    // If some boards are turned on late, ESP32 will reset due to low voltage.
+    // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
+    // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
+    pinMode(KB_POWERON, OUTPUT);
+    digitalWrite(KB_POWERON, HIGH);
+    // T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
+    // We need to initialize all CS pins in advance otherwise there will be SPI communication issues
+    // e.g. when detecting the SD card
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    delay(100);
+}
--- a/variants/esp32s3/t-deck/variant.h
+++ b/variants/esp32s3/t-deck/variant.h
@@ -71,6 +71,7 @@
 #define TB_RIGHT 2
 #define TB_PRESS 0 // BUTTON_PIN
 #define TB_DIRECTION FALLING
+#define TB_THRESHOLD 3

 // microphone
 #define ES7210_SCK 47
--- a/variants/esp32s3/t-watch-s3/platformio.ini
+++ b/variants/esp32s3/t-watch-s3/platformio.ini
@@ -24,7 +24,7 @@ lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
  lovyan03/LovyanGFX@1.2.7
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
  adafruit/Adafruit DRV2605 Library@1.2.4
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
--- a/variants/esp32s3/tbeam-s3-core/platformio.ini
+++ b/variants/esp32s3/tbeam-s3-core/platformio.ini
@@ -19,7 +19,7 @@ board_check = true
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4

 build_flags = 
  ${esp32s3_base.build_flags} 
--- a/variants/esp32s3/tlora-pager/platformio.ini
+++ b/variants/esp32s3/tlora-pager/platformio.ini
@@ -17,6 +17,10 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/tlora-pager>
+
 build_flags = ${esp32s3_base.build_flags} 
  -I variants/esp32s3/tlora-pager
  -D T_LORA_PAGER 
@@ -39,7 +43,7 @@ lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
  lewisxhe/PCF8563_Library@1.0.1
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
  # renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
  https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.0.zip
  # TODO renovate
--- a/variants/esp32s3/tlora-pager/variant.cpp
+++ b/variants/esp32s3/tlora-pager/variant.cpp
@@ -0,0 +1,31 @@
+#include "variant.h"
+#include "ExtensionIOXL9555.hpp"
+extern ExtensionIOXL9555 io;
+
+void earlyInitVariant()
+{
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    pinMode(KB_INT, INPUT_PULLUP);
+    // io expander
+    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
+    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
+    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
+    io.pinMode(EXPANDS_KB_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.pinMode(EXPANDS_SD_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
+}
--- a/variants/native/portduino.ini
+++ b/variants/native/portduino.ini
@@ -29,7 +29,7 @@ lib_deps =
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
  lovyan03/LovyanGFX@1.2.7
  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
-  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
+  https://github.com/pine64/libch341-spi-userspace/archive/23c42319a69cffcb65868e3c72e6bed83974a393.zip
  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
--- a/variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
+++ b/variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
--- a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.cpp
+++ b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.cpp
@@ -42,3 +42,21 @@ void initVariant()
    pinMode(PIN_LED3, OUTPUT);
    ledOff(PIN_LED3);
 }
+
+void variant_shutdown()
+{
+    for (int pin = 0; pin < 48; pin++) {
+        if (pin == SX126X_BUSY || pin == PIN_SPI_SCK || pin == SX126X_DIO1 || pin == PIN_SPI_MOSI || pin == PIN_SPI_MISO ||
+            pin == SX126X_CS || pin == SX126X_RESET || pin == PIN_NFC1 || pin == PIN_NFC2 || pin == PIN_BUTTON1 ||
+            pin == PIN_BUTTON2) {
+            continue;
+        }
+        pinMode(pin, OUTPUT);
+        digitalWrite(pin, LOW);
+        if (pin >= 32) {
+            NRF_P1->DIRCLR = (1 << (pin - 32));
+        } else {
+            NRF_GPIO->DIRCLR = (1 << pin);
+        }
+    }
+}
--- a/variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini
+++ b/variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini
@@ -25,4 +25,4 @@ lib_deps =
  # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
  khoih-prog/nRF52_PWM@1.0.1
  ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4
--- a/variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini
+++ b/variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini
@@ -22,4 +22,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW
 lib_deps =
  ${nrf52840_base.lib_deps}
  ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4
--- a/variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
+++ b/variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
+++ b/variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
@@ -15,6 +15,6 @@ lib_deps =
  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4
--- a/variants/nrf52840/TWC_mesh_v4/platformio.ini
+++ b/variants/nrf52840/TWC_mesh_v4/platformio.ini
@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
--- a/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.cpp
+++ b/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.cpp
@@ -19,6 +19,7 @@
 */

 #include "variant.h"
+#include "Arduino.h"
 #include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
@@ -36,3 +37,10 @@ void initVariant()
    pinMode(PIN_LED1, OUTPUT);
    ledOff(PIN_LED1);
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_default(PIN_GPS_PPS);
+    detachInterrupt(PIN_GPS_PPS);
+    detachInterrupt(PIN_BUTTON1);
+}
--- a/variants/nrf52840/heltec_mesh_node_t114/variant.cpp
+++ b/variants/nrf52840/heltec_mesh_node_t114/variant.cpp
@@ -19,6 +19,7 @@
 */

 #include "variant.h"
+#include "Arduino.h"
 #include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
@@ -36,3 +37,10 @@ void initVariant()
    pinMode(PIN_LED1, OUTPUT);
    ledOff(PIN_LED1);
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_default(PIN_GPS_PPS);
+    detachInterrupt(PIN_GPS_PPS);
+    detachInterrupt(PIN_BUTTON1);
+}
--- a/variants/nrf52840/heltec_mesh_node_t114/variant.h
+++ b/variants/nrf52840/heltec_mesh_node_t114/variant.h
@@ -156,7 +156,7 @@ No longer populated on PCB

 // The bluetooth transmit power on the nRF52840 is adjustable from -20dB to +8dB in steps of 4dB
 // so NRF52_BLE_TX_POWER can be set to -20, -16, -12, -8, -4, 0 (default), 4, and 8.
-//#define NRF52_BLE_TX_POWER 8
+// #define NRF52_BLE_TX_POWER 8

 /*
 * GPS pins
--- a/variants/nrf52840/heltec_mesh_solar/variant.cpp
+++ b/variants/nrf52840/heltec_mesh_solar/variant.cpp
@@ -19,6 +19,7 @@
 */

 #include "variant.h"
+#include "Arduino.h"
 #include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
@@ -38,3 +39,10 @@ void initVariant()
    digitalWrite(PIN_SCREEN_VDD_CTL, LOW); // Start with power on
 #endif
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_default(PIN_GPS_PPS);
+    detachInterrupt(PIN_GPS_PPS);
+    detachInterrupt(PIN_BUTTON1);
+}
--- a/variants/nrf52840/meshlink/variant.cpp
+++ b/variants/nrf52840/meshlink/variant.cpp
@@ -20,4 +20,11 @@ void initVariant()
    pinMode(PIN_WD_EN, OUTPUT);
    digitalWrite(PIN_WD_EN, HIGH); // Enable the Watchdog at boot
 #endif
+}
+
+void variant_shutdown()
+{
+#ifdef PIN_WD_EN
+    digitalWrite(PIN_WD_EN, LOW);
+#endif
 }
--- a/variants/nrf52840/nano-g2-ultra/platformio.ini
+++ b/variants/nrf52840/nano-g2-ultra/platformio.ini
@@ -20,5 +20,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs
--- a/variants/nrf52840/r1-neo/variant.cpp
+++ b/variants/nrf52840/r1-neo/variant.cpp
@@ -43,3 +43,11 @@ void initVariant()
    // pinMode(PIN_3V3_EN, OUTPUT);
    // digitalWrite(PIN_3V3_EN, HIGH);
 }
+
+void earlyInitVariant()
+{
+    pinMode(DCDC_EN_HOLD, OUTPUT);
+    digitalWrite(DCDC_EN_HOLD, HIGH);
+    pinMode(NRF_ON, OUTPUT);
+    digitalWrite(NRF_ON, HIGH);
+}
--- a/variants/nrf52840/rak4631_epaper/platformio.ini
+++ b/variants/nrf52840/rak4631_epaper/platformio.ini
@@ -15,7 +15,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
  melopero/Melopero RV3028@1.2.0
  # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
--- a/variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini
+++ b/variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini
@@ -17,7 +17,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
  melopero/Melopero RV3028@1.2.0
  # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
--- a/variants/nrf52840/rak_wismeshtap/variant.cpp
+++ b/variants/nrf52840/rak_wismeshtap/variant.cpp
@@ -42,4 +42,21 @@ void initVariant()
    // 3V3 Power Rail
    pinMode(PIN_3V3_EN, OUTPUT);
    digitalWrite(PIN_3V3_EN, HIGH);
+}
+
+void variant_shutdown()
+{
+    // GPIO restores input status, otherwise there will be leakage current
+    nrf_gpio_cfg_default(TFT_BL);
+    nrf_gpio_cfg_default(TFT_DC);
+    nrf_gpio_cfg_default(TFT_CS);
+    nrf_gpio_cfg_default(TFT_SCLK);
+    nrf_gpio_cfg_default(TFT_MOSI);
+    nrf_gpio_cfg_default(TFT_MISO);
+    nrf_gpio_cfg_default(SCREEN_TOUCH_INT);
+    nrf_gpio_cfg_default(WB_I2C1_SCL);
+    nrf_gpio_cfg_default(WB_I2C1_SDA);
+
+    // nrf_gpio_cfg_default(WB_I2C2_SCL);
+    // nrf_gpio_cfg_default(WB_I2C2_SDA);
 }
--- a/variants/nrf52840/t-echo/platformio.ini
+++ b/variants/nrf52840/t-echo/platformio.ini
@@ -32,7 +32,7 @@ lib_deps =
  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs

 [env:t-echo-inkhud]
@@ -53,4 +53,4 @@ lib_deps =
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
--- a/variants/nrf52840/t-echo/variant.cpp
+++ b/variants/nrf52840/t-echo/variant.cpp
@@ -42,3 +42,13 @@ void initVariant()
    pinMode(PIN_LED3, OUTPUT);
    ledOff(PIN_LED3);
 }
+
+void variant_shutdown()
+{
+    // To power off the T-Echo, the display must be set
+    // as an input pin; otherwise, there will be leakage current.
+    pinMode(PIN_EINK_CS, INPUT);
+    pinMode(PIN_EINK_DC, INPUT);
+    pinMode(PIN_EINK_RES, INPUT);
+    pinMode(PIN_EINK_BUSY, INPUT);
+}
Author	SHA1	Message	Date
Jonathan Bennett	80341326fe	Add portduino_status, assign hardware device IDs, and try to recover a CH341 device on a USB error	2026-01-26 15:48:44 -06:00
Keane	7efc3e3770	Replace strcpy with strncpy and null termination (#9436 ) Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2026-01-26 14:32:03 -06:00
Jonathan Bennett	3d58c6e916	Trackball revamp (#9440 ) * Trackball revamp * Use Throttle * Volatile!	2026-01-26 14:28:05 -06:00
Jonathan Bennett	c038cfe69a	Move device code from main.cpp to earlyInitVariant (#9438 )	2026-01-26 11:54:14 -06:00
Ben Meadors	0770f25e79	Merge remote-tracking branch 'origin/master' into develop	2026-01-26 08:56:38 -06:00
Jonathan Bennett	8a9830282a	Move Lora Init code into LoraInit.cpp/h (#9435 ) * Move Lora Init code into LoraInit.cpp/h * Add missed extern definition * More carefully check for nullptr in LoraInit.cpp * STM32 fixes * Add extern SPI1 for HW_SPI1_DEVICE * Move initLora to RadioInterface.h	2026-01-25 20:54:17 -06:00
Ben Meadors	8894a0b711	Consolidate LoRa params / preset logic and fix display of preset values (#9413 ) * Consolidate LoRa params / preset logic and fix display of preset values * Move preset coercion logic to RadioInterface * Fix some warnings * Fix warnings * STM32 fix * Add unit tests * Update src/mesh/RadioInterface.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2026-01-25 18:02:26 -06:00
renovate[bot]	b627fa720b	Update SensorLib to v0.3.4 (#9396 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-01-24 05:46:46 -06:00
renovate[bot]	9faf178bdc	Update XPowersLib to v0.3.3 (#9354 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-01-24 05:45:26 -06:00
renovate[bot]	c98f134b40	Update meshtastic-esp32_https_server digest to b0f3960 (#9393 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-01-24 05:39:22 -06:00
renovate[bot]	5838b26d90	Update lewisxhe-SensorLib to v0.3.4 (#9395 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-01-24 05:39:05 -06:00
renovate[bot]	a417760887	Update meshtastic/device-ui digest to 37ad715 (#9403 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-01-24 05:18:48 -06:00
renovate[bot]	04d2dd3b1c	Update GxEPD2 to v1.6.6 (#9412 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-01-24 05:16:47 -06:00