Merge branch 'master' into pager-shutdown

As reported by @gruberaaron , work to improve the 1200bps reset for
esptool caused all runs of device-install.bat to use 1200bps as
the baud rate.

This change removes the general SET "ESPTOOL_BAUD=1200" that was causing
the issues and places the baud settings for reset mode inside the conditional.

Fixes https://github.com/meshtastic/firmware/issues/7172

.trunk/trunk.yaml

@@ -8,8 +8,8 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.465
-    - renovate@41.82.10
+    - checkov@3.2.467
+    - renovate@41.88.0
     - prettier@3.6.2
     - trufflehog@3.90.5
     - yamllint@1.37.1

bin/device-install.bat

@@ -100,7 +100,6 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
-SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
@@ -142,7 +141,7 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %BPS_RESET% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL 1200 --after no_reset read_flash_status
     GOTO eof
 )
 

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,9 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.7" date="2025-08-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
+    </release>
     <release version="2.7.6" date="2025-08-12">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
     </release>

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.6.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.7.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -39,5 +39,6 @@ meshtasticd (2.7.6.0) UNRELEASED; urgency=medium
 
   [  ]
   * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
 
- --  <github-actions[bot]@users.noreply.github.com>  Tue, 12 Aug 2025 23:48:48 +0000
+ -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 28 Aug 2025 10:33:25 +0000

src/Power.cpp

@@ -128,6 +128,7 @@ RAK9154Sensor rak9154Sensor;
 #ifdef HAS_PPM
 // note: XPOWERS_CHIP_XXX must be defined in variant.h
 #include <XPowersLib.h>
+XPowersPPM *PPM = NULL;
 #endif
 
 #ifdef HAS_BQ27220
@@ -681,7 +682,7 @@ bool Power::setup()
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
-    }  else if (meshSolarInit()) {
+    } else if (meshSolarInit()) {
         found = true;
     } else if (analogInit()) {
         found = true;
@@ -745,7 +746,11 @@ void Power::shutdown()
 
 #if HAS_SCREEN
     if (screen) {
+#ifdef T_DECK_PRO
+        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
+#else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
+#endif
     }
 #endif
 #if !defined(ARCH_STM32WL)
@@ -763,7 +768,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false, true);
+    doDeepSleep(DELAY_FOREVER, true, true);
 #elif defined(ARCH_PORTDUINO)
     exit(EXIT_SUCCESS);
 #else
@@ -1320,7 +1325,6 @@ bool Power::lipoInit()
 class LipoCharger : public HasBatteryLevel
 {
   private:
-    XPowersPPM *ppm = nullptr;
     BQ27220 *bq = nullptr;
 
   public:
@@ -1329,41 +1333,41 @@ class LipoCharger : public HasBatteryLevel
      */
     bool runOnce()
     {
-        if (ppm == nullptr) {
-            ppm = new XPowersPPM;
-            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
+        if (PPM == nullptr) {
+            PPM = new XPowersPPM;
+            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
             if (result) {
                 LOG_INFO("PPM BQ25896 init succeeded");
                 // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // ppm->setSysPowerDownVoltage(3100);
+                // PPM->setSysPowerDownVoltage(3100);
 
                 // Set input current limit, default is 500mA
-                // ppm->setInputCurrentLimit(800);
+                // PPM->setInputCurrentLimit(800);
 
                 // Disable current limit pin
-                // ppm->disableCurrentLimitPin();
+                // PPM->disableCurrentLimitPin();
 
                 // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                ppm->setChargeTargetVoltage(4288);
+                PPM->setChargeTargetVoltage(4288);
 
                 // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // ppm->setPrechargeCurr(64);
+                // PPM->setPrechargeCurr(64);
 
                 // The premise is that limit pin is disabled, or it will
                 // only follow the maximum charging current set by limit pin.
                 // Set the charging current , Range:0~5056mA ,step:64mA
-                ppm->setChargerConstantCurr(1024);
+                PPM->setChargerConstantCurr(1024);
 
                 // To obtain voltage data, the ADC must be enabled first
-                ppm->enableMeasure();
+                PPM->enableMeasure();
 
                 // Turn on charging function
                 // If there is no battery connected, do not turn on the charging function
-                ppm->enableCharge();
+                PPM->enableCharge();
             } else {
                 LOG_WARN("PPM BQ25896 init failed");
-                delete ppm;
-                ppm = nullptr;
+                delete PPM;
+                PPM = nullptr;
                 return false;
             }
         }
@@ -1404,23 +1408,23 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
+    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
 
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
+    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
      */
     virtual bool isCharging() override
     {
-        bool isCharging = ppm->isCharging();
+        bool isCharging = PPM->isCharging();
         if (isCharging) {
             LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
         } else {
-            if (!ppm->isVbusIn()) {
+            if (!PPM->isVbusIn()) {
                 LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
             }
         }
@@ -1453,8 +1457,6 @@ bool Power::lipoChargerInit()
 }
 #endif
 
-
-
 #ifdef HELTEC_MESH_SOLAR
 #include "meshSolarApp.h"
 
@@ -1492,7 +1494,7 @@ class meshSolarBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return meshSolarIsVbusIn();}
+    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
 
     /**
      * return true if the battery is currently charging

src/gps/GPS.cpp

@@ -1504,7 +1504,7 @@ static int32_t toDegInt(RawDegrees d)
  * Perform any processing that should be done only while the GPS is awake and looking for a fix.
  * Override this method to check for new locations
  *
- * @return true if we've acquired a new location
+ * @return true if we've set a new time
  */
 bool GPS::lookForTime()
 {
@@ -1544,11 +1544,12 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         if (t.tm_mon > -1) {
             LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
                       t.tm_sec, ti.age());
-            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultInvalidTime) {
-                // Clear the GPS buffer if we got an invalid time
-                clearBuffer();
+            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultSuccess) {
+                LOG_DEBUG("Time set.");
+                return true;
+            } else {
+                return false;
             }
-            return true;
         } else
             return false;
     } else

src/gps/RTC.cpp

@@ -23,7 +23,7 @@ static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only upda
  * Reads the current date and time from the RTC module and updates the system time.
  * @return True if the RTC was successfully read and the system time was updated, false otherwise.
  */
-void readFromRTC()
+RTCSetResult readFromRTC()
 {
     struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
@@ -44,8 +44,15 @@ void readFromRTC()
         t.tm_sec = rtc.getSecond();
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+
+#ifdef BUILD_EPOCH
+        if (tv.tv_sec < BUILD_EPOCH) {
+            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+            return RTCSetResultInvalidTime;
+        }
+#endif
+
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         timeStartMsec = now;
@@ -53,6 +60,7 @@ void readFromRTC()
         if (currentQuality == RTCQualityNone) {
             currentQuality = RTCQualityDevice;
         }
+        return RTCSetResultSuccess;
     }
 #elif defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
@@ -75,8 +83,15 @@ void readFromRTC()
         t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+
+#ifdef BUILD_EPOCH
+        if (tv.tv_sec < BUILD_EPOCH) {
+            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+            return RTCSetResultInvalidTime;
+        }
+#endif
+
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         timeStartMsec = now;
@@ -84,6 +99,7 @@ void readFromRTC()
         if (currentQuality == RTCQualityNone) {
             currentQuality = RTCQualityDevice;
         }
+        return RTCSetResultSuccess;
     }
 #else
     if (!gettimeofday(&tv, NULL)) {
@@ -92,8 +108,10 @@ void readFromRTC()
         LOG_DEBUG("Read RTC time as %ld", printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
+        return RTCSetResultSuccess;
     }
 #endif
+    return RTCSetResultNotSet;
 }
 
 /**
@@ -101,7 +119,7 @@ void readFromRTC()
  *
  * @param q The quality of the provided time.
  * @param tv A pointer to a timeval struct containing the time to potentially set the RTC to.
- * @return True if the RTC was set, false otherwise.
+ * @return RTCSetResult
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */

src/gps/RTC.h

@@ -48,7 +48,7 @@ uint32_t getTime(bool local = false);
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
 uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
-void readFromRTC();
+RTCSetResult readFromRTC();
 
 time_t gm_mktime(struct tm *tm);
 

src/mesh/MeshModule.cpp

@@ -85,11 +85,8 @@ meshtastic_MeshPacket *MeshModule::allocErrorResponse(meshtastic_Routing_Error e
     return r;
 }
 
-void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src, const char *specificModule)
+void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src)
 {
-    if (specificModule) {
-        LOG_DEBUG("Calling specific module: %s", specificModule);
-    }
     // LOG_DEBUG("In call modules");
     bool moduleFound = false;
 
@@ -103,15 +100,11 @@ void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src, const char
     // Was this message directed to us specifically?  Will be false if we are sniffing someone elses packets
     auto ourNodeNum = nodeDB->getNodeNum();
     bool toUs = isBroadcast(mp.to) || isToUs(&mp);
+    bool fromUs = mp.from == ourNodeNum;
 
     for (auto i = modules->begin(); i != modules->end(); ++i) {
         auto &pi = **i;
 
-        // If specificModule is provided, only call that specific module
-        if (specificModule && (!pi.name || strcmp(pi.name, specificModule) != 0)) {
-            continue;
-        }
-
         pi.currentRequest = ∓
 
         /// We only call modules that are interested in the packet (and the message is destined to us or we are promiscious)

src/mesh/MeshModule.h

@@ -73,7 +73,7 @@ class MeshModule
 
     /** For use only by MeshService
      */
-    static void callModules(meshtastic_MeshPacket &mp, RxSource src = RX_SRC_RADIO, const char *specificModule = nullptr);
+    static void callModules(meshtastic_MeshPacket &mp, RxSource src = RX_SRC_RADIO);
 
     static std::vector<MeshModule *> GetMeshModulesWithUIFrames(int startIndex);
     static void observeUIEvents(Observer<const UIFrameEvent *> *observer);

src/mesh/NodeDB.cpp

@@ -1711,10 +1711,10 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde
 /// we updateGUI and updateGUIforNode if we think our this change is big enough for a redraw
 void NodeDB::updateFrom(const meshtastic_MeshPacket &mp)
 {
-    // if (mp.from == getNodeNum()) {
-    //     LOG_DEBUG("Ignore update from self");
-    //     return;
-    // }
+    if (mp.from == getNodeNum()) {
+        LOG_DEBUG("Ignore update from self");
+        return;
+    }
     if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag && mp.from) {
         LOG_DEBUG("Update DB node 0x%x, rx_time=%u", mp.from, mp.rx_time);
 

src/mesh/Router.cpp

@@ -562,7 +562,7 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
             // Now that we are encrypting the packet channel should be the hash (no longer the index)
             p->channel = hash;
             if (hash < 0) {
-                // No suitable channel could be found for sending
+                // No suitable channel could be found for
                 return meshtastic_Routing_Error_NO_CHANNEL;
             }
             crypto->encryptPacket(getFrom(p), p->id, numbytes, bytes);
@@ -578,7 +578,7 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
         // Now that we are encrypting the packet channel should be the hash (no longer the index)
         p->channel = hash;
         if (hash < 0) {
-            // No suitable channel could be found for sending
+            // No suitable channel could be found for
             return meshtastic_Routing_Error_NO_CHANNEL;
         }
         crypto->encryptPacket(getFrom(p), p->id, numbytes, bytes);
@@ -671,7 +671,7 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
             mqtt->onSend(*p_encrypted, *p, p->channel);
 #endif
     } else if (p->from == nodeDB->getNodeNum() && !skipHandle) {
-        MeshModule::callModules(*p, src, ROUTING_MODULE);
+        MeshModule::callModules(*p, src);
     }
 
     packetPool.release(p_encrypted); // Release the encrypted packet

src/modules/CannedMessageModule.cpp

@@ -632,10 +632,10 @@ bool CannedMessageModule::handleMessageSelectorInput(const InputEvent *event, bo
         // Normal canned message selection
         if (runState == CANNED_MESSAGE_RUN_STATE_INACTIVE || runState == CANNED_MESSAGE_RUN_STATE_DISABLED) {
         } else {
+#if CANNED_MESSAGE_ADD_CONFIRMATION
             // Show confirmation dialog before sending canned message
             NodeNum destNode = dest;
             ChannelIndex chan = channel;
-#if CANNED_MESSAGE_ADD_CONFIRMATION
             graphics::menuHandler::showConfirmationBanner("Send message?", [this, destNode, chan, current]() {
                 this->sendText(destNode, chan, current, false);
                 payload = runState;
@@ -991,7 +991,6 @@ int32_t CannedMessageModule::runOnce()
                 this->runState = CANNED_MESSAGE_RUN_STATE_INACTIVE;
             }
         }
-        e.action = UIFrameEvent::Action::REGENERATE_FRAMESET;
         this->currentMessageIndex = -1;
         this->freetext = "";
         this->cursor = 0;

src/modules/NeighborInfoModule.cpp

@@ -105,14 +105,15 @@ void NeighborInfoModule::sendNeighborInfo(NodeNum dest, bool wantReplies)
 {
     meshtastic_NeighborInfo neighborInfo = meshtastic_NeighborInfo_init_zero;
     collectNeighborInfo(&neighborInfo);
-    meshtastic_MeshPacket *p = allocDataProtobuf(neighborInfo);
-    // send regardless of whether or not we have neighbors in our DB,
-    // because we want to get neighbors for the next cycle
-    p->to = dest;
-    p->decoded.want_response = wantReplies;
-    p->priority = meshtastic_MeshPacket_Priority_BACKGROUND;
-    printNeighborInfo("SENDING", &neighborInfo);
-    service->sendToMesh(p, RX_SRC_LOCAL, true);
+    // only send neighbours if we have some to send
+    if (neighborInfo.neighbors_count > 0) {
+        meshtastic_MeshPacket *p = allocDataProtobuf(neighborInfo);
+        p->to = dest;
+        p->decoded.want_response = wantReplies;
+        p->priority = meshtastic_MeshPacket_Priority_BACKGROUND;
+        printNeighborInfo("SENDING", &neighborInfo);
+        service->sendToMesh(p, RX_SRC_LOCAL, true);
+    }
 }
 
 /*
@@ -214,4 +215,4 @@ meshtastic_Neighbor *NeighborInfoModule::getOrCreateNeighbor(NodeNum originalSen
         neighbors.push_back(new_nbr);
     }
     return &neighbors.back();
-}
+}

src/modules/RoutingModule.cpp

@@ -73,7 +73,7 @@ uint8_t RoutingModule::getHopLimitForResponse(uint8_t hopStart, uint8_t hopLimit
     return Default::getConfiguredOrDefaultHopLimit(config.lora.hop_limit); // Use the default hop limit
 }
 
-RoutingModule::RoutingModule() : ProtobufModule(ROUTING_MODULE, meshtastic_PortNum_ROUTING_APP, &meshtastic_Routing_msg)
+RoutingModule::RoutingModule() : ProtobufModule("routing", meshtastic_PortNum_ROUTING_APP, &meshtastic_Routing_msg)
 {
     isPromiscuous = true;
 

src/modules/RoutingModule.h

@@ -2,8 +2,6 @@
 #include "Channels.h"
 #include "ProtobufModule.h"
 
-static const char *ROUTING_MODULE = "routing";
-
 /**
  * Routing module for router control messages
  */

src/sleep.cpp

@@ -32,6 +32,16 @@ esp_sleep_source_t wakeCause; // the reason we booted this time
 #endif
 #include "Throttle.h"
 
+#ifdef USE_XL9555
+#include "ExtensionIOXL9555.hpp"
+extern ExtensionIOXL9555 io;
+#endif
+
+#ifdef HAS_PPM
+#include <XPowersLib.h>
+extern XPowersPPM *PPM;
+#endif
+
 #ifndef INCLUDE_vTaskSuspend
 #define INCLUDE_vTaskSuspend 0
 #endif
@@ -297,6 +307,14 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
 #endif
 #endif
 
+#ifdef HAS_PPM
+    if (PPM) {
+        LOG_INFO("PMM shutdown");
+        console->flush();
+        PPM->shutdown();
+    }
+#endif
+
 #ifdef HAS_PMU
     if (pmu_found && PMU) {
         // Obsolete comment: from back when we we used to receive lora packets while CPU was in deep sleep.
@@ -412,6 +430,16 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     if (pmu_found)
         gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
 #endif
+
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power down XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, LOW);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.digitalWrite(EXPANDS_KB_EN, LOW);
+    io.digitalWrite(EXPANDS_SD_EN, LOW);
+    io.digitalWrite(EXPANDS_GPIO_EN, LOW);
+#endif
+
     auto res = esp_sleep_enable_gpio_wakeup();
     if (res != ESP_OK) {
         LOG_ERROR("esp_sleep_enable_gpio_wakeup result %d", res);
@@ -452,6 +480,14 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
         gpio_wakeup_disable((gpio_num_t)RF95_IRQ);
     }
 #endif
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power up XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+#endif
 
     esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
     notifyLightSleepEnd.notifyObservers(cause); // Button interrupts are reattached here

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 7
-build = 6
+build = 7