Merge branch 'master' into pager-shutdown

.github/actions/setup-base/action.yml

@@ -23,7 +23,7 @@ runs:
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
 
     - name: Setup Python
-      uses: actions/setup-python@v6
+      uses: actions/setup-python@v5
       with:
         python-version: 3.x
         cache: pip

.github/workflows/main_matrix.yml

@@ -43,7 +43,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
+      - uses: actions/setup-python@v5
         with:
           python-version: 3.x
           cache: pip
@@ -370,7 +370,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -439,7 +439,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -494,7 +494,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/package_pio_deps.yml

@@ -31,7 +31,7 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/pr_enforce_labels.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Check for PR labels
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);

.github/workflows/pr_tests.yml

@@ -177,7 +177,7 @@ jobs:
 
       - name: Comment test results on PR
         if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           script: |
             const fs = require('fs');

.github/workflows/release_channels.yml

@@ -63,7 +63,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.0.0
+        uses: actions/stale@v9.1.0
         with:
           days-before-stale: 45
           exempt-issue-labels: pinned,3.0

.github/workflows/tests.yml

@@ -47,7 +47,7 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v5
+        uses: actions/setup-node@v4
         with:
           node-version: 22
 

.github/workflows/trunk_format_pr.yml

@@ -39,7 +39,7 @@ jobs:
           git push
 
       - name: Comment on PR
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.trunk/trunk.yaml

@@ -8,22 +8,22 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.469
-    - renovate@41.94.0
+    - checkov@3.2.467
+    - renovate@41.88.0
     - prettier@3.6.2
     - trufflehog@3.90.5
     - yamllint@1.37.1
     - bandit@1.8.6
-    - trivy@0.66.0
+    - trivy@0.65.0
     - taplo@0.10.0
-    - ruff@0.12.11
+    - ruff@0.12.10
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
     - actionlint@1.7.7
     - flake8@7.3.0
-    - hadolint@2.13.1
+    - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.11.0
     - black@25.1.0

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/c490bcd019e0658404088a61b96e653c9da22c45.zip
+  https://github.com/meshtastic/platform-native/archive/37d986499ce24511952d7146db72d667c6bdaff7.zip
 framework = arduino
 
 build_src_filter = 
@@ -31,8 +31,6 @@ lib_deps =
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
-  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 build_flags =
   ${arduino_base.build_flags}

arch/stm32/stm32.ini

@@ -50,7 +50,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
 
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
+  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
   OneButton

bin/device-install.bat

@@ -14,11 +14,11 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
 SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
 
 GOTO getopts
 :help
@@ -119,10 +119,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -232,14 +233,14 @@ IF NOT EXIST !SPIFFS_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!S
 
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash "!FILENAME!", but first erasing and writing system information..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase-flash || GOTO eof
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash 0x00 "!FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase_flash || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x00 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash BLEOTA "!OTA_FILENAME!" at OTA_OFFSET !OTA_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash SPIFFS "!SPIFFS_FILENAME!" at SPIFFS_OFFSET !SPIFFS_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -251,9 +252,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write-flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-install.sh

@@ -5,10 +5,6 @@ BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
-# Constants
-RESET_BAUD=1200
-FIRMWARE_OFFSET=0x00
-
 # Variant groups
 BIGDB_8MB=(
 	"picomputer-s3"
@@ -37,9 +33,10 @@ BIGDB_16MB=(
 	"m5stack-cores3"
 	"station-g2"
     "t-eth-elite"
-    "tlora-pager"
     "t-watch-s3"
-    "elecrow-adv"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
 )
 S3_VARIANTS=(
     "s3"
@@ -50,7 +47,6 @@ S3_VARIANTS=(
     "station-g2"
     "unphone"
     "t-eth-elite"
-    "tlora-pager"
     "mesh-tab"
     "dreamcatcher"
     "ESP32-S3-Pico"
@@ -125,7 +121,7 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
 	exit 0
 fi
 
@@ -205,12 +201,12 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase-flash
-    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD erase_flash
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD write-flash $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD write-flash $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

bin/device-update.bat

@@ -6,8 +6,6 @@ SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
-SET "RESET_BAUD=1200"
-SET "UPDATE_OFFSET=0x10000"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "CHANGE_MODE=0"
@@ -87,13 +85,14 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=""!PYTHON!"" -m esptool"
+    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -106,11 +105,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-CALL :LOG_MESSAGE DEBUG "esptool exit code: %ERRORLEVEL%"
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -128,13 +127,13 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %CHANGE_MODE% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !RESET_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
 @REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET !UPDATE_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !UPDATE_OFFSET! "!FILENAME!" || GOTO eof
+CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -146,9 +145,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase-flash|write-flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-update.sh

@@ -3,11 +3,6 @@
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
 
-# Constants
-FLASH_BAUD=115200
-RESET_BAUD=1200
-UPDATE_OFFSET=0x10000
-
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
     ESPTOOL_CMD="$PYTHON -m esptool"
@@ -69,7 +64,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
     exit 0
 fi
 
@@ -80,7 +75,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,12 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.9" date="2025-09-03">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.9</url>
-    </release>
-    <release version="2.7.8" date="2025-08-30">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
-    </release>
     <release version="2.7.7" date="2025-08-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
     </release>

boards/wiscore_rak3172.json

@@ -5,7 +5,7 @@
     },
     "core": "stm32",
     "cpu": "cortex-m4",
-    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_RAK3172_MODULE",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
     "f_cpu": "48000000L",
     "mcu": "stm32wle5ccu",
     "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.9.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.7.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -41,10 +41,4 @@ meshtasticd (2.7.9.0) UNRELEASED; urgency=medium
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
- --  <github-actions[bot]@users.noreply.github.com>  Wed, 03 Sep 2025 23:39:17 +0000
+ -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 28 Aug 2025 10:33:25 +0000

platformio.ini

@@ -118,7 +118,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/a04bc94b45dacdabf3ae1832d4591390e35fc61f.zip
+	https://github.com/meshtastic/device-ui/archive/a3e0e1be372d069f47b4c19d718f5267251744d7.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -157,8 +157,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
+	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
+	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
@@ -177,8 +177,6 @@ lib_deps =
 	adafruit/Adafruit PCT2075@1.0.5
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
-	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.2
 
 ; (not included in native / portduino)
 [environmental_extra]

src/DisplayFormatters.cpp

@@ -1,14 +1,7 @@
 #include "DisplayFormatters.h"
 
-const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                         bool usePreset)
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
 {
-
-    // If use_preset is false, always return "Custom"
-    if (!usePreset) {
-        return "Custom";
-    }
-
     switch (preset) {
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
         return useShortName ? "ShortT" : "ShortTurbo";

src/DisplayFormatters.h

@@ -4,6 +4,5 @@
 class DisplayFormatters
 {
   public:
-    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                 bool usePreset);
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
 };

src/Power.cpp

@@ -833,25 +833,16 @@ void Power::readPowerStatus()
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        // Use stack-allocated buffer to avoid heap allocations in monitoring code
-        char threadlist[256] = "Threads running:";
-        int threadlistLen = strlen(threadlist);
+        std::string threadlist = "Threads running:";
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                // Use snprintf to safely append to stack buffer without heap allocation
-                int remaining = sizeof(threadlist) - threadlistLen - 1;
-                if (remaining > 0) {
-                    int written = snprintf(threadlist + threadlistLen, remaining, " %s", thread->ThreadName.c_str());
-                    if (written > 0 && written < remaining) {
-                        threadlistLen += written;
-                    }
-                }
+                threadlist += vformat(" %s", thread->ThreadName.c_str());
                 running++;
             }
         }
-        LOG_DEBUG(threadlist);
+        LOG_DEBUG(threadlist.c_str());
         LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
                   memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
@@ -865,19 +856,15 @@ void Power::readPowerStatus()
         sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
         auto newHeap = memGet.getFreeHeap();
-        // Use stack-allocated buffers to avoid heap allocations in monitoring code
-        char heapTopic[128];
-        snprintf(heapTopic, sizeof(heapTopic), "%s/2/heap/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char heapString[16];
-        snprintf(heapString, sizeof(heapString), "%u", newHeap);
-        mqtt->pubSub.publish(heapTopic, heapString, false);
-
+        std::string heapTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+        std::string heapString = std::to_string(newHeap);
+        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
         auto wifiRSSI = WiFi.RSSI();
-        char wifiTopic[128];
-        snprintf(wifiTopic, sizeof(wifiTopic), "%s/2/wifi/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char wifiString[16];
-        snprintf(wifiString, sizeof(wifiString), "%d", wifiRSSI);
-        mqtt->pubSub.publish(wifiTopic, wifiString, false);
+        std::string wifiTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+        std::string wifiString = std::to_string(wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
     }
 #endif
 

src/configuration.h

@@ -26,10 +26,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#if __has_include("Melopero_RV3028.h")
+#ifdef RV3028_RTC
 #include "Melopero_RV3028.h"
 #endif
-#if __has_include("pcf8563.h")
+#ifdef PCF8563_RTC
 #include "pcf8563.h"
 #endif
 

src/detect/ScanI2C.h

@@ -80,7 +80,6 @@ class ScanI2C
         LTR553ALS,
         BHI260AP,
         BMM150,
-        TSL2561,
         DRV2605
     } DeviceType;
 

src/detect/ScanI2CTwoWire.cpp

@@ -461,17 +461,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-            case TSL25911_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
-                if (registerValue == 0x50) {
-                    type = TSL2591;
-                    logFoundDevice("TSL25911", (uint8_t)addr.address);
-                } else {
-                    type = TSL2561;
-                    logFoundDevice("TSL2561", (uint8_t)addr.address);
-                }
-                break;
-
+                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -843,6 +843,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         setPowerPMU(true);                                        // Power (PMU): on
         writePinStandby(false);                                   // Standby (pin): awake (not standby)
         setPowerUBLOX(true);                                      // Standby (UBLOX): awake
+#ifdef GNSS_AIROHA
+        lastFixStartMsec = 0;
+#endif
         break;
 
     case GPS_SOFTSLEEP:
@@ -860,7 +863,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep (not awake)
         setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
 
@@ -872,7 +877,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep
         setPowerUBLOX(false, 0);                                    // Standby (UBLOX): asleep, indefinitely
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
     }
@@ -1055,8 +1062,6 @@ void GPS::down()
         }
         // If update interval long enough (or softsleep unsupported): hardsleep instead
         setPowerState(GPS_HARDSLEEP, sleepTime);
-        // Reset the fix quality to 0, since we're off.
-        fixQual = 0;
     }
 }
 
@@ -1116,19 +1121,11 @@ int32_t GPS::runOnce()
         shouldPublish = true;
     }
 
-    uint8_t prev_fixQual = fixQual;
     bool gotLoc = lookForLocation();
     if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
         LOG_DEBUG("hasValidLocation RISING EDGE");
         hasValidLocation = true;
         shouldPublish = true;
-        // Hold for 20secs after getting a lock to download ephemeris etc
-        fixHoldEnds = millis() + 20000;
-    }
-
-    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
-        fixHoldEnds = millis() + 20000;
-        shouldPublish = true; // Publish immediately, since next publish is at end of hold
     }
 
     bool tooLong = scheduling.searchedTooLong();
@@ -1137,7 +1134,8 @@ int32_t GPS::runOnce()
 
     // Once we get a location we no longer desperately want an update
     if ((gotLoc && gotTime) || tooLong) {
-        if (tooLong && !gotLoc) {
+
+        if (tooLong) {
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
                 LOG_DEBUG("hasValidLocation FALLING EDGE");
@@ -1145,15 +1143,9 @@ int32_t GPS::runOnce()
             p = meshtastic_Position_init_default;
             hasValidLocation = false;
         }
-        if (millis() > fixHoldEnds) {
-            shouldPublish = true; // publish our update at the end of the lock hold
-            publishUpdate();
-            down();
-#ifdef GPS_DEBUG
-        } else {
-            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
-#endif
-        }
+
+        down();
+        shouldPublish = true; // publish our update for this just finished acquisition window
     }
 
     // If state has changed do a publish
@@ -1516,6 +1508,24 @@ static int32_t toDegInt(RawDegrees d)
  */
 bool GPS::lookForTime()
 {
+
+#ifdef GNSS_AIROHA
+    uint8_t fix = reader.fixQuality();
+    if (fix >= 1 && fix <= 5) {
+        if (lastFixStartMsec > 0) {
+            if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                return false;
+            } else {
+                clearBuffer();
+            }
+        } else {
+            lastFixStartMsec = millis();
+            return false;
+        }
+    } else {
+        return false;
+    }
+#endif
     auto ti = reader.time;
     auto d = reader.date;
     if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
@@ -1554,6 +1564,25 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
  */
 bool GPS::lookForLocation()
 {
+#ifdef GNSS_AIROHA
+    if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
+        uint8_t fix = reader.fixQuality();
+        if (fix >= 1 && fix <= 5) {
+            if (lastFixStartMsec > 0) {
+                if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                    return false;
+                } else {
+                    clearBuffer();
+                }
+            } else {
+                lastFixStartMsec = millis();
+                return false;
+            }
+        } else {
+            return false;
+        }
+    }
+#endif
     // By default, TinyGPS++ does not parse GPGSA lines, which give us
     //   the 2D/3D fixType (see NMEAGPS.h)
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)

src/gps/GPS.h

@@ -159,7 +159,7 @@ class GPS : private concurrency::OSThread
     uint8_t fixType = 0;      // fix type from GPGSA
 #endif
 
-    uint32_t fixHoldEnds = 0;
+    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
 

src/gps/RTC.cpp

@@ -55,9 +55,9 @@ RTCSetResult readFromRTC()
 
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;
@@ -94,9 +94,9 @@ RTCSetResult readFromRTC()
 
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;
@@ -132,10 +132,6 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
     if (tv->tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
-    } else if (tv->tv_sec > (BUILD_EPOCH + FORTY_YEARS)) {
-        LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch, BUILD_EPOCH,
-                 BUILD_EPOCH + FORTY_YEARS);
-        return RTCSetResultInvalidTime;
     }
 #endif
 
@@ -254,10 +250,6 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     if (tv.tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
-    } else if (tv.tv_sec > (BUILD_EPOCH + FORTY_YEARS)) {
-        LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch, BUILD_EPOCH,
-                 BUILD_EPOCH + FORTY_YEARS);
-        return RTCSetResultInvalidTime;
     }
 #endif
 

src/gps/RTC.h

@@ -55,6 +55,3 @@ time_t gm_mktime(struct tm *tm);
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60
-#ifdef BUILD_EPOCH
-#define FORTY_YEARS (40UL * 365 * SEC_PER_DAY) // probably time to update your firmware
-#endif

src/graphics/TFTDisplay.cpp

@@ -1128,15 +1128,6 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
 #endif
 }
 
-TFTDisplay::~TFTDisplay()
-{
-    // Clean up allocated line pixel buffer to prevent memory leak
-    if (linePixelBuffer != nullptr) {
-        free(linePixelBuffer);
-        linePixelBuffer = nullptr;
-    }
-}
-
 // Write the buffer to the display memory
 void TFTDisplay::display(bool fromBlank)
 {

src/graphics/TFTDisplay.h

@@ -20,9 +20,6 @@ class TFTDisplay : public OLEDDisplay
     */
     TFTDisplay(uint8_t, int, int, OLEDDISPLAY_GEOMETRY, HW_I2C);
 
-    // Destructor to clean up allocated memory
-    ~TFTDisplay();
-
     // Write the buffer to the display memory
     virtual void display() override { display(false); };
     virtual void display(bool fromBlank);

src/graphics/draw/DebugRenderer.cpp

@@ -263,6 +263,12 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
             display->drawString(x + 1, y, "USB");
     }
 
+    //    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, true);
+
+    //    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
+    //    if (config.display.heading_bold)
+    //        display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
+
     uint32_t currentMillis = millis();
     uint32_t seconds = currentMillis / 1000;
     uint32_t minutes = seconds / 60;
@@ -392,7 +398,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
 
     // === Second Row: Radio Preset ===
-    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
     if (region != nullptr) {

src/input/RotaryEncoderImpl.cpp

@@ -70,7 +70,7 @@ int32_t RotaryEncoderImpl::runOnce()
         this->notifyObservers(&e);
     }
 
-    return 10;
+    return 20;
 }
 
 #endif

src/input/cardKbI2cImpl.cpp

@@ -13,11 +13,7 @@ void CardKbI2cImpl::init()
     if (cardkb_found.address == 0x00) {
         LOG_DEBUG("Rescan for I2C keyboard");
         uint8_t i2caddr_scan[] = {CARDKB_ADDR, TDECK_KB_ADDR, BBQ10_KB_ADDR, MPR121_KB_ADDR, TCA8418_KB_ADDR};
-#if defined(T_LORA_PAGER)
         uint8_t i2caddr_asize = sizeof(i2caddr_scan) / sizeof(i2caddr_scan[0]);
-#else
-        uint8_t i2caddr_asize = 5;
-#endif
         auto i2cScanner = std::unique_ptr<ScanI2CTwoWire>(new ScanI2CTwoWire());
 
 #if WIRE_INTERFACES_COUNT == 2

src/main.cpp

@@ -419,7 +419,7 @@ void setup()
     struct timeval tv;
     tv.tv_sec = time(NULL);
     tv.tv_usec = 0;
-    perhapsSetRTC(RTCQualityDevice, &tv);
+    perhapsSetRTC(RTCQualityNTP, &tv);
 #endif
 
     powerMonInit();
@@ -741,7 +741,6 @@ void setup()
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::RAK12035, meshtastic_TelemetrySensorType_RAK12035);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::PCT2075, meshtastic_TelemetrySensorType_PCT2075);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SCD4X, meshtastic_TelemetrySensorType_SCD4X);
-    scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::TSL2561, meshtastic_TelemetrySensorType_TSL2561);
 
     i2cScanner.reset();
 #endif
@@ -1526,7 +1525,7 @@ extern meshtastic_DeviceMetadata getDeviceMetadata()
 #if ((!HAS_SCREEN || NO_EXT_GPIO) || MESHTASTIC_EXCLUDE_CANNEDMESSAGES) && !defined(MESHTASTIC_INCLUDE_NICHE_GRAPHICS)
     deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_CANNEDMSG_CONFIG;
 #endif
-#if NO_EXT_GPIO || MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
+#if NO_EXT_GPIO
     deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_EXTNOTIF_CONFIG;
 #endif
 // Only edge case here is if we apply this a device with built in Accelerometer and want to detect interrupts

src/mesh/Channels.cpp

@@ -368,7 +368,7 @@ const char *Channels::getName(size_t chIndex)
         // Per mesh.proto spec, if bandwidth is specified we must ignore modemPreset enum, we assume that in that case
         // the app effed up and forgot to set channelSettings.name
         if (config.lora.use_preset) {
-            channelName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
+            channelName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
         } else {
             channelName = "Custom";
         }
@@ -382,8 +382,7 @@ bool Channels::isDefaultChannel(ChannelIndex chIndex)
     const auto &ch = getByIndex(chIndex);
     if (ch.settings.psk.size == 1 && ch.settings.psk.bytes[0] == 1) {
         const char *name = getName(chIndex);
-        const char *presetName =
-            DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
+        const char *presetName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
         // Check if the name is the default derived from the modem preset
         if (strcmp(name, presetName) == 0)
             return true;

src/mesh/NextHopRouter.cpp

@@ -34,11 +34,8 @@ bool NextHopRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
     bool weWereNextHop = false;
     if (wasSeenRecently(p, true, &wasFallback, &weWereNextHop)) { // Note: this will also add a recent packet record
         printPacket("Ignore dupe incoming msg", p);
-
-        if (p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA) {
-            rxDupe++;
-            stopRetransmission(p->from, p->id);
-        }
+        rxDupe++;
+        stopRetransmission(p->from, p->id);
 
         // If it was a fallback to flooding, try to relay again
         if (wasFallback) {
@@ -74,11 +71,10 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
         if (p->from != 0) {
             meshtastic_NodeInfoLite *origTx = nodeDB->getMeshNode(p->from);
             if (origTx) {
-                // Either relayer of ACK was also a relayer of the packet, or we were the *only* relayer and the ACK came directly
-                // from the destination
+                // Either relayer of ACK was also a relayer of the packet, or we were the relayer and the ACK came directly from
+                // the destination
                 if (wasRelayer(p->relay_node, p->decoded.request_id, p->to) ||
-                    (p->hop_start != 0 && p->hop_start == p->hop_limit &&
-                     wasSoleRelayer(ourRelayID, p->decoded.request_id, p->to))) {
+                    (wasRelayer(ourRelayID, p->decoded.request_id, p->to) && p->hop_start != 0 && p->hop_start == p->hop_limit)) {
                     if (origTx->next_hop != p->relay_node) { // Not already set
                         LOG_INFO("Update next hop of 0x%x to 0x%x based on ACK/reply", p->from, p->relay_node);
                         origTx->next_hop = p->relay_node;

src/mesh/PacketHistory.cpp

@@ -294,7 +294,7 @@ void PacketHistory::insert(const PacketRecord &r)
 
 /* Check if a certain node was a relayer of a packet in the history given an ID and sender
  * @return true if node was indeed a relayer, false if not */
-bool PacketHistory::wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender, bool *wasSole)
+bool PacketHistory::wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender)
 {
     if (!initOk()) {
         LOG_ERROR("PacketHistory - wasRelayer: NOT INITIALIZED!");
@@ -322,42 +322,27 @@ bool PacketHistory::wasRelayer(const uint8_t relayer, const uint32_t id, const N
               found->sender, found->id, found->next_hop, millis() - found->rxTimeMsec, found->relayed_by[0], found->relayed_by[1],
               found->relayed_by[2], relayer);
 #endif
-    return wasRelayer(relayer, *found, wasSole);
+    return wasRelayer(relayer, *found);
 }
 
 /* Check if a certain node was a relayer of a packet in the history given iterator
  * @return true if node was indeed a relayer, false if not */
-bool PacketHistory::wasRelayer(const uint8_t relayer, const PacketRecord &r, bool *wasSole)
+bool PacketHistory::wasRelayer(const uint8_t relayer, const PacketRecord &r)
 {
-    bool found = false;
-    bool other_present = false;
-
-    for (uint8_t i = 0; i < NUM_RELAYERS; ++i) {
+    for (uint8_t i = 0; i < NUM_RELAYERS; i++) {
         if (r.relayed_by[i] == relayer) {
-            found = true;
-        } else if (r.relayed_by[i] != 0) {
-            other_present = true;
+#if VERBOSE_PACKET_HISTORY
+            LOG_DEBUG("Packet History - was rel.PR.: s=%08x id=%08x rls=%02x %02x %02x / rl=%02x? YES", r.sender, r.id,
+                      r.relayed_by[0], r.relayed_by[1], r.relayed_by[2], relayer);
+#endif
+            return true;
         }
     }
-
-    if (wasSole) {
-        *wasSole = (found && !other_present);
-    }
-
 #if VERBOSE_PACKET_HISTORY
     LOG_DEBUG("Packet History - was rel.PR.: s=%08x id=%08x rls=%02x %02x %02x / rl=%02x? NO", r.sender, r.id, r.relayed_by[0],
               r.relayed_by[1], r.relayed_by[2], relayer);
 #endif
-
-    return found;
-}
-
-// Check if a certain node was the *only* relayer of a packet in the history given an ID and sender
-bool PacketHistory::wasSoleRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender)
-{
-    bool wasSole = false;
-    wasRelayer(relayer, id, sender, &wasSole);
-    return wasSole;
+    return false;
 }
 
 // Remove a relayer from the list of relayers of a packet in the history given an ID and sender

src/mesh/PacketHistory.h

@@ -34,9 +34,8 @@ class PacketHistory
     void insert(const PacketRecord &r); // Insert or replace a packet record in the history
 
     /* Check if a certain node was a relayer of a packet in the history given iterator
-     * If wasSole is not nullptr, it will be set to true if the relayer was the only relayer of that packet
      * @return true if node was indeed a relayer, false if not */
-    bool wasRelayer(const uint8_t relayer, const PacketRecord &r, bool *wasSole = nullptr);
+    bool wasRelayer(const uint8_t relayer, const PacketRecord &r);
 
     PacketHistory(const PacketHistory &);            // non construction-copyable
     PacketHistory &operator=(const PacketHistory &); // non copyable
@@ -55,12 +54,8 @@ class PacketHistory
                          bool *weWereNextHop = nullptr);
 
     /* Check if a certain node was a relayer of a packet in the history given an ID and sender
-     * If wasSole is not nullptr, it will be set to true if the relayer was the only relayer of that packet
      * @return true if node was indeed a relayer, false if not */
-    bool wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender, bool *wasSole = nullptr);
-
-    // Check if a certain node was the *only* relayer of a packet in the history given an ID and sender
-    bool wasSoleRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);
+    bool wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);
 
     // Remove a relayer from the list of relayers of a packet in the history given an ID and sender
     void removeRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);

src/mesh/RadioInterface.cpp

@@ -586,8 +586,7 @@ void RadioInterface::applyModemConfig()
 
     // Check if we use the default frequency slot
     RadioInterface::uses_default_frequency_slot =
-        channel_num ==
-        hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset)) % numChannels;
+        channel_num == hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false)) % numChannels;
 
     // Old frequency selection formula
     // float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);

src/mesh/ReliableRouter.cpp

@@ -58,10 +58,7 @@ bool ReliableRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
             // marked as wantAck
             sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, old->packet->channel);
 
-            // Only stop retransmissions if the rebroadcast came via LoRa
-            if (p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA) {
-                stopRetransmission(key);
-            }
+            stopRetransmission(key);
         } else {
             LOG_DEBUG("Didn't find pending packet");
         }

src/mesh/STM32WLE5JCInterface.cpp

@@ -1,13 +1,13 @@
-#include "configuration.h"
-
-#ifdef ARCH_STM32WL
 #include "STM32WLE5JCInterface.h"
+#include "configuration.h"
 #include "error.h"
 
 #ifndef STM32WLx_MAX_POWER
 #define STM32WLx_MAX_POWER 22
 #endif
 
+#ifdef ARCH_STM32WL
+
 STM32WLE5JCInterface::STM32WLE5JCInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq,
                                            RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy)
     : SX126xInterface(hal, cs, irq, rst, busy)

src/mesh/STM32WLE5JCInterface.h

@@ -1,8 +1,8 @@
 #pragma once
 
-#ifdef ARCH_STM32WL
 #include "SX126xInterface.h"
-#include "rfswitch.h"
+
+#ifdef ARCH_STM32WL
 
 /**
  * Our adapter for STM32WLE5JC radios
@@ -16,4 +16,13 @@ class STM32WLE5JCInterface : public SX126xInterface<STM32WLx>
     virtual bool init() override;
 };
 
+/* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
+ * Wio-E5 module ONLY transmits through RFO_HP
+ * Receive: PA4=1, PA5=0
+ * Transmit(high output power, SMPS mode): PA4=0, PA5=1 */
+static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA4, PA5, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[4] = {
+    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};
+
 #endif // ARCH_STM32WL

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -360,7 +360,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2273
+#define meshtastic_BackupPreferences_size        2271
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1737
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -188,7 +188,7 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
 #define meshtastic_LocalConfig_size              747
-#define meshtastic_LocalModuleConfig_size        671
+#define meshtastic_LocalModuleConfig_size        669
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/meshtastic/mesh.pb.h

@@ -272,8 +272,6 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_HELTEC_MESH_SOLAR = 108,
     /* Lilygo T-Echo Lite */
     meshtastic_HardwareModel_T_ECHO_LITE = 109,
-    /* New Heltec LoRA32 with ESP32-S3 CPU */
-    meshtastic_HardwareModel_HELTEC_V4 = 110,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */

src/mesh/generated/meshtastic/module_config.pb.h

@@ -317,9 +317,6 @@ typedef struct _meshtastic_ModuleConfig_RangeTestConfig {
     /* Bool value indicating that this node should save a RangeTest.csv file.
  ESP32 Only */
     bool save;
-    /* Bool indicating that the node should cleanup / destroy it's RangeTest.csv file.
- ESP32 Only */
-    bool clear_on_reboot;
 } meshtastic_ModuleConfig_RangeTestConfig;
 
 /* Configuration for both device and environment metrics */
@@ -522,7 +519,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_SerialConfig_init_default {0, 0, 0, 0, _meshtastic_ModuleConfig_SerialConfig_Serial_Baud_MIN, 0, _meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MIN, 0}
 #define meshtastic_ModuleConfig_ExternalNotificationConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_StoreForwardConfig_init_default {0, 0, 0, 0, 0, 0}
-#define meshtastic_ModuleConfig_RangeTestConfig_init_default {0, 0, 0, 0}
+#define meshtastic_ModuleConfig_RangeTestConfig_init_default {0, 0, 0}
 #define meshtastic_ModuleConfig_TelemetryConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_CannedMessageConfig_init_default {0, 0, 0, 0, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 #define meshtastic_ModuleConfig_AmbientLightingConfig_init_default {0, 0, 0, 0, 0}
@@ -538,7 +535,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_SerialConfig_init_zero {0, 0, 0, 0, _meshtastic_ModuleConfig_SerialConfig_Serial_Baud_MIN, 0, _meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MIN, 0}
 #define meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_StoreForwardConfig_init_zero {0, 0, 0, 0, 0, 0}
-#define meshtastic_ModuleConfig_RangeTestConfig_init_zero {0, 0, 0, 0}
+#define meshtastic_ModuleConfig_RangeTestConfig_init_zero {0, 0, 0}
 #define meshtastic_ModuleConfig_TelemetryConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_CannedMessageConfig_init_zero {0, 0, 0, 0, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 #define meshtastic_ModuleConfig_AmbientLightingConfig_init_zero {0, 0, 0, 0, 0}
@@ -613,7 +610,6 @@ extern "C" {
 #define meshtastic_ModuleConfig_RangeTestConfig_enabled_tag 1
 #define meshtastic_ModuleConfig_RangeTestConfig_sender_tag 2
 #define meshtastic_ModuleConfig_RangeTestConfig_save_tag 3
-#define meshtastic_ModuleConfig_RangeTestConfig_clear_on_reboot_tag 4
 #define meshtastic_ModuleConfig_TelemetryConfig_device_update_interval_tag 1
 #define meshtastic_ModuleConfig_TelemetryConfig_environment_update_interval_tag 2
 #define meshtastic_ModuleConfig_TelemetryConfig_environment_measurement_enabled_tag 3
@@ -807,8 +803,7 @@ X(a, STATIC,   SINGULAR, BOOL,     is_server,         6)
 #define meshtastic_ModuleConfig_RangeTestConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, BOOL,     enabled,           1) \
 X(a, STATIC,   SINGULAR, UINT32,   sender,            2) \
-X(a, STATIC,   SINGULAR, BOOL,     save,              3) \
-X(a, STATIC,   SINGULAR, BOOL,     clear_on_reboot,   4)
+X(a, STATIC,   SINGULAR, BOOL,     save,              3)
 #define meshtastic_ModuleConfig_RangeTestConfig_CALLBACK NULL
 #define meshtastic_ModuleConfig_RangeTestConfig_DEFAULT NULL
 
@@ -906,7 +901,7 @@ extern const pb_msgdesc_t meshtastic_RemoteHardwarePin_msg;
 #define meshtastic_ModuleConfig_MapReportSettings_size 14
 #define meshtastic_ModuleConfig_NeighborInfoConfig_size 10
 #define meshtastic_ModuleConfig_PaxcounterConfig_size 30
-#define meshtastic_ModuleConfig_RangeTestConfig_size 12
+#define meshtastic_ModuleConfig_RangeTestConfig_size 10
 #define meshtastic_ModuleConfig_RemoteHardwareConfig_size 96
 #define meshtastic_ModuleConfig_SerialConfig_size 28
 #define meshtastic_ModuleConfig_StoreForwardConfig_size 24

src/mesh/http/ContentHandler.cpp

@@ -342,11 +342,6 @@ void handleFsBrowseStatic(HTTPRequest *req, HTTPResponse *res)
     res->print(value->Stringify().c_str());
 
     delete value;
-
-    // Clean up the fileList to prevent memory leak
-    for (auto *val : fileList) {
-        delete val;
-    }
 }
 
 void handleFsDeleteStatic(HTTPRequest *req, HTTPResponse *res)
@@ -615,38 +610,33 @@ void handleReport(HTTPRequest *req, HTTPResponse *res)
         res->println("<pre>");
     }
 
-    // Helper lambda to create JSON array and clean up memory properly
-    auto createJSONArrayFromLog = [](uint32_t *logArray, int count) -> JSONValue * {
-        JSONArray tempArray;
-        for (int i = 0; i < count; i++) {
-            tempArray.push_back(new JSONValue((int)logArray[i]));
-        }
-        JSONValue *result = new JSONValue(tempArray);
-        // Clean up original array to prevent memory leak
-        for (auto *val : tempArray) {
-            delete val;
-        }
-        return result;
-    };
-
     // data->airtime->tx_log
+    JSONArray txLogValues;
     uint32_t *logArray;
     logArray = airTime->airtimeReport(TX_LOG);
-    JSONValue *txLogJsonValue = createJSONArrayFromLog(logArray, airTime->getPeriodsToLog());
+    for (int i = 0; i < airTime->getPeriodsToLog(); i++) {
+        txLogValues.push_back(new JSONValue((int)logArray[i]));
+    }
 
     // data->airtime->rx_log
+    JSONArray rxLogValues;
     logArray = airTime->airtimeReport(RX_LOG);
-    JSONValue *rxLogJsonValue = createJSONArrayFromLog(logArray, airTime->getPeriodsToLog());
+    for (int i = 0; i < airTime->getPeriodsToLog(); i++) {
+        rxLogValues.push_back(new JSONValue((int)logArray[i]));
+    }
 
     // data->airtime->rx_all_log
+    JSONArray rxAllLogValues;
     logArray = airTime->airtimeReport(RX_ALL_LOG);
-    JSONValue *rxAllLogJsonValue = createJSONArrayFromLog(logArray, airTime->getPeriodsToLog());
+    for (int i = 0; i < airTime->getPeriodsToLog(); i++) {
+        rxAllLogValues.push_back(new JSONValue((int)logArray[i]));
+    }
 
     // data->airtime
     JSONObject jsonObjAirtime;
-    jsonObjAirtime["tx_log"] = txLogJsonValue;
-    jsonObjAirtime["rx_log"] = rxLogJsonValue;
-    jsonObjAirtime["rx_all_log"] = rxAllLogJsonValue;
+    jsonObjAirtime["tx_log"] = new JSONValue(txLogValues);
+    jsonObjAirtime["rx_log"] = new JSONValue(rxLogValues);
+    jsonObjAirtime["rx_all_log"] = new JSONValue(rxAllLogValues);
     jsonObjAirtime["channel_utilization"] = new JSONValue(airTime->channelUtilizationPercent());
     jsonObjAirtime["utilization_tx"] = new JSONValue(airTime->utilizationTXPercent());
     jsonObjAirtime["seconds_since_boot"] = new JSONValue(int(airTime->getSecondsSinceBoot()));
@@ -775,11 +765,6 @@ void handleNodes(HTTPRequest *req, HTTPResponse *res)
     JSONValue *value = new JSONValue(jsonObjOuter);
     res->print(value->Stringify().c_str());
     delete value;
-
-    // Clean up the nodesArray to prevent memory leak
-    for (auto *val : nodesArray) {
-        delete val;
-    }
 }
 
 /*
@@ -970,10 +955,5 @@ void handleScanNetworks(HTTPRequest *req, HTTPResponse *res)
     JSONValue *value = new JSONValue(jsonObjOuter);
     res->print(value->Stringify().c_str());
     delete value;
-
-    // Clean up the networkObjs to prevent memory leak
-    for (auto *val : networkObjs) {
-        delete val;
-    }
 }
 #endif

src/modules/ExternalNotificationModule.cpp

@@ -364,10 +364,9 @@ ExternalNotificationModule::ExternalNotificationModule()
     // moduleConfig.external_notification.alert_message_buzzer = true;
 
     if (moduleConfig.external_notification.enabled) {
-#if !defined(MESHTASTIC_EXCLUDE_INPUTBROKER)
         if (inputBroker) // put our callback in the inputObserver list
             inputObserver.observe(inputBroker);
-#endif
+
         if (nodeDB->loadProto(rtttlConfigFile, meshtastic_RTTTLConfig_size, sizeof(meshtastic_RTTTLConfig),
                               &meshtastic_RTTTLConfig_msg, &rtttlConfig) != LoadFileResult::LOAD_SUCCESS) {
             memset(rtttlConfig.ringtone, 0, sizeof(rtttlConfig.ringtone));

src/modules/Modules.cpp

@@ -88,7 +88,7 @@
 #include "modules/StoreForwardModule.h"
 #endif
 #endif
-
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
 #include "modules/ExternalNotificationModule.h"
 #endif
@@ -98,6 +98,7 @@
 #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !MESHTASTIC_EXCLUDE_SERIAL
 #include "modules/SerialModule.h"
 #endif
+#endif
 
 #if !MESHTASTIC_EXCLUDE_DROPZONE
 #include "modules/DropzoneModule.h"
@@ -245,8 +246,8 @@ void setupModules()
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_POWER_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         new PowerTelemetryModule();
 #endif
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)) &&                             \
-    !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
+    !defined(CONFIG_IDF_TARGET_ESP32C3)
 #if !MESHTASTIC_EXCLUDE_SERIAL
         if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
             new SerialModule();
@@ -267,11 +268,13 @@ void setupModules()
         storeForwardModule = new StoreForwardModule();
 #endif
 #endif
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
         externalNotificationModule = new ExternalNotificationModule();
 #endif
 #if !MESHTASTIC_EXCLUDE_RANGETEST && !MESHTASTIC_EXCLUDE_GPS
         new RangeTestModule();
+#endif
 #endif
     } else {
 #if !MESHTASTIC_EXCLUDE_ADMIN

src/modules/RangeTestModule.cpp

@@ -31,7 +31,7 @@ uint32_t packetSequence = 0;
 
 int32_t RangeTestModule::runOnce()
 {
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_STM32WL) || defined(ARCH_PORTDUINO)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_PORTDUINO)
 
     /*
         Uncomment the preferences below if you want to use the module
@@ -130,7 +130,7 @@ void RangeTestModuleRadio::sendPayload(NodeNum dest, bool wantReplies)
 
 ProcessMessage RangeTestModuleRadio::handleReceived(const meshtastic_MeshPacket &mp)
 {
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_STM32WL) || defined(ARCH_PORTDUINO)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_PORTDUINO)
 
     if (moduleConfig.range_test.enabled) {
 

src/modules/SerialModule.cpp

@@ -49,8 +49,8 @@
 #include "meshSolarApp.h"
 #endif
 
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)) &&                             \
-    !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
+    !defined(CONFIG_IDF_TARGET_ESP32C3)
 
 #define RX_BUFFER 256
 #define TIMEOUT 250
@@ -67,7 +67,7 @@ SerialModuleRadio *serialModuleRadio;
     defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE)
 SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial;
-#elif defined(CONFIG_IDF_TARGET_ESP32C6) || defined(RAK3172)
+#elif defined(CONFIG_IDF_TARGET_ESP32C6)
 SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial1;
 #else
@@ -173,18 +173,7 @@ int32_t SerialModule::runOnce()
                 Serial.begin(baud);
                 Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
             }
-#elif defined(ARCH_STM32WL)
-#ifndef RAK3172
-            HardwareSerial *serialInstance = &Serial2;
-#else
-            HardwareSerial *serialInstance = &Serial1;
-#endif
-            if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
-                serialInstance->setTx(moduleConfig.serial.txd);
-                serialInstance->setRx(moduleConfig.serial.rxd);
-            }
-            serialInstance->begin(baud);
-            serialInstance->setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
+
 #elif defined(ARCH_ESP32)
 
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
@@ -271,13 +260,8 @@ int32_t SerialModule::runOnce()
                 while (Serial1.available()) {
                     serialPayloadSize = Serial1.readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 #else
-#ifndef RAK3172
-                HardwareSerial *serialInstance = &Serial2;
-#else
-                HardwareSerial *serialInstance = &Serial1;
-#endif
-                while (serialInstance->available()) {
-                    serialPayloadSize = serialInstance->readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
+                while (Serial2.available()) {
+                    serialPayloadSize = Serial2.readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 #endif
                     serialModuleRadio->sendPayload();
                 }
@@ -527,7 +511,7 @@ ParsedLine parseLine(const char *line)
 void SerialModule::processWXSerial()
 {
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&              \
-    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5) && !defined(ARCH_STM32WL)
+    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
     static double dir_sum_sin = 0;

src/modules/SerialModule.h

@@ -8,8 +8,8 @@
 #include <Arduino.h>
 #include <functional>
 
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)) &&                             \
-    !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
+    !defined(CONFIG_IDF_TARGET_ESP32C3)
 
 class SerialModule : public StreamAPI, private concurrency::OSThread
 {

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -198,13 +198,6 @@ T1000xSensor t1000xSensor;
 IndicatorSensor indicatorSensor;
 #endif
 
-#if __has_include(<Adafruit_TSL2561_U.h>)
-#include "Sensor/TSL2561Sensor.h"
-TSL2561Sensor tsl2561Sensor;
-#else
-NullSensor tsl2561Sensor;
-#endif
-
 #define FAILED_STATE_SENSOR_READ_MULTIPLIER 10
 #define DISPLAY_RECEIVEID_MEASUREMENTS_ON_SCREEN true
 
@@ -303,8 +296,6 @@ int32_t EnvironmentTelemetryModule::runOnce()
                 result = max17048Sensor.runOnce();
             if (cgRadSens.hasSensor())
                 result = cgRadSens.runOnce();
-            if (tsl2561Sensor.hasSensor())
-                result = tsl2561Sensor.runOnce();
             if (pct2075Sensor.hasSensor())
                 result = pct2075Sensor.runOnce();
                 // this only works on the wismesh hub with the solar option. This is not an I2C sensor, so we don't need the
@@ -651,10 +642,6 @@ bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m
         valid = valid && nau7802Sensor.getMetrics(m);
         hasSensor = true;
     }
-    if (tsl2561Sensor.hasSensor()) {
-        valid = valid && tsl2561Sensor.getMetrics(m);
-        hasSensor = true;
-    }
     if (aht10Sensor.hasSensor()) {
         if (!bmp280Sensor.hasSensor() && !bmp3xxSensor.hasSensor()) {
             valid = valid && aht10Sensor.getMetrics(m);

src/modules/Telemetry/Sensor/TSL2561Sensor.cpp

@@ -1,41 +0,0 @@
-#include "configuration.h"
-
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_TSL2561_U.h>)
-
-#include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "TSL2561Sensor.h"
-#include "TelemetrySensor.h"
-#include <Adafruit_TSL2561_U.h>
-
-TSL2561Sensor::TSL2561Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_TSL2561, "TSL2561") {}
-
-int32_t TSL2561Sensor::runOnce()
-{
-    LOG_INFO("Init sensor: %s", sensorName);
-    if (!hasSensor()) {
-        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
-    }
-
-    status = tsl.begin(nodeTelemetrySensorsMap[sensorType].second);
-
-    return initI2CSensor();
-}
-
-void TSL2561Sensor::setup()
-{
-    tsl.setGain(TSL2561_GAIN_1X);
-    tsl.setIntegrationTime(TSL2561_INTEGRATIONTIME_101MS);
-}
-
-bool TSL2561Sensor::getMetrics(meshtastic_Telemetry *measurement)
-{
-    measurement->variant.environment_metrics.has_lux = true;
-    sensors_event_t event;
-    tsl.getEvent(&event);
-    measurement->variant.environment_metrics.lux = event.light;
-    LOG_INFO("Lux: %f", measurement->variant.environment_metrics.lux);
-
-    return true;
-}
-
-#endif

src/modules/Telemetry/Sensor/TSL2561Sensor.h

@@ -1,23 +0,0 @@
-#include "configuration.h"
-
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_TSL2561_U.h>)
-
-#include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "TelemetrySensor.h"
-#include <Adafruit_TSL2561_U.h>
-
-class TSL2561Sensor : public TelemetrySensor
-{
-  private:
-    // The magic number is a sensor id, the actual value doesn't matter
-    Adafruit_TSL2561_Unified tsl = Adafruit_TSL2561_Unified(TSL2561_ADDR_LOW, 12345);
-
-  protected:
-    virtual void setup() override;
-
-  public:
-    TSL2561Sensor();
-    virtual int32_t runOnce() override;
-    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
-};
-#endif

src/motion/BMX160Sensor.h

@@ -7,7 +7,7 @@
 
 #if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 
-#if !defined(RAK2560) && __has_include(<Rak_BMX160.h>)
+#if defined(RAK_4631) && !defined(RAK2560) && __has_include(<Rak_BMX160.h>)
 
 #include "Fusion/Fusion.h"
 #include <Rak_BMX160.h>

src/sleep.cpp

@@ -431,6 +431,15 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
         gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
 #endif
 
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power down XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, LOW);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.digitalWrite(EXPANDS_KB_EN, LOW);
+    io.digitalWrite(EXPANDS_SD_EN, LOW);
+    io.digitalWrite(EXPANDS_GPIO_EN, LOW);
+#endif
+
     auto res = esp_sleep_enable_gpio_wakeup();
     if (res != ESP_OK) {
         LOG_ERROR("esp_sleep_enable_gpio_wakeup result %d", res);
@@ -471,6 +480,14 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
         gpio_wakeup_disable((gpio_num_t)RF95_IRQ);
     }
 #endif
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power up XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+#endif
 
     esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
     notifyLightSleepEnd.notifyObservers(cause); // Button interrupts are reattached here

test/test_meshpacket_serializer/ports/test_encrypted.cpp

@@ -1,63 +1,5 @@
 #include "../test_helpers.h"
 
-// test data initialization
-const int from = 0x11223344;
-const int to = 0x55667788;
-const int id = 0x9999;
-
-// Helper function to create a test encrypted packet
-meshtastic_MeshPacket create_test_encrypted_packet(uint32_t from, uint32_t to, uint32_t id, const char *data)
-{
-    meshtastic_MeshPacket packet = meshtastic_MeshPacket_init_zero;
-    packet.from = from;
-    packet.to = to;
-    packet.id = id;
-    packet.which_payload_variant = meshtastic_MeshPacket_encrypted_tag;
-
-    if (data) {
-        packet.encrypted.size = strlen(data);
-        memcpy(packet.encrypted.bytes, data, packet.encrypted.size);
-    }
-
-    return packet;
-}
-
-// Helper function for all encrypted packet assertions
-void assert_encrypted_packet(const std::string &json, meshtastic_MeshPacket packet)
-{
-    // Parse and validate JSON
-    TEST_ASSERT_TRUE(json.length() > 0);
-
-    JSONValue *root = JSON::Parse(json.c_str());
-    TEST_ASSERT_NOT_NULL(root);
-    TEST_ASSERT_TRUE(root->IsObject());
-
-    JSONObject jsonObj = root->AsObject();
-
-    // Assert basic packet fields
-    TEST_ASSERT_TRUE(jsonObj.find("from") != jsonObj.end());
-    TEST_ASSERT_EQUAL(packet.from, (uint32_t)jsonObj.at("from")->AsNumber());
-
-    TEST_ASSERT_TRUE(jsonObj.find("to") != jsonObj.end());
-    TEST_ASSERT_EQUAL(packet.to, (uint32_t)jsonObj.at("to")->AsNumber());
-
-    TEST_ASSERT_TRUE(jsonObj.find("id") != jsonObj.end());
-    TEST_ASSERT_EQUAL(packet.id, (uint32_t)jsonObj.at("id")->AsNumber());
-
-    // Assert encrypted data fields
-    TEST_ASSERT_TRUE(jsonObj.find("bytes") != jsonObj.end());
-    TEST_ASSERT_TRUE(jsonObj.at("bytes")->IsString());
-
-    TEST_ASSERT_TRUE(jsonObj.find("size") != jsonObj.end());
-    TEST_ASSERT_EQUAL(packet.encrypted.size, (int)jsonObj.at("size")->AsNumber());
-
-    // Assert hex encoding
-    std::string encrypted_hex = jsonObj["bytes"]->AsString();
-    TEST_ASSERT_EQUAL(packet.encrypted.size * 2, encrypted_hex.length());
-
-    delete root;
-}
-
 // Test encrypted packet serialization
 void test_encrypted_packet_serialization()
 {
@@ -106,14 +48,3 @@ void test_encrypted_packet_serialization()
 
     delete root;
 }
-
-// Test empty encrypted packet
-void test_empty_encrypted_packet()
-{
-    const char *data = "";
-
-    meshtastic_MeshPacket packet = create_test_encrypted_packet(from, to, id, data);
-    std::string json = MeshPacketSerializer::JsonSerializeEncrypted(&packet);
-
-    assert_encrypted_packet(json, packet);
-}

test/test_meshpacket_serializer/test_helpers.h

@@ -11,8 +11,7 @@
 #include <unity.h>
 
 // Helper function to create a test packet with the given port and payload
-static meshtastic_MeshPacket create_test_packet(meshtastic_PortNum port, const uint8_t *payload, size_t payload_size,
-                                                int payload_variant = meshtastic_MeshPacket_decoded_tag)
+static meshtastic_MeshPacket create_test_packet(meshtastic_PortNum port, const uint8_t *payload, size_t payload_size)
 {
     meshtastic_MeshPacket packet = meshtastic_MeshPacket_init_zero;
 
@@ -30,12 +29,8 @@ static meshtastic_MeshPacket create_test_packet(meshtastic_PortNum port, const u
     packet.delayed = meshtastic_MeshPacket_Delayed_NO_DELAY;
 
     // Set decoded variant
-    packet.which_payload_variant = payload_variant;
+    packet.which_payload_variant = meshtastic_MeshPacket_decoded_tag;
     packet.decoded.portnum = port;
-    if (payload_variant == meshtastic_MeshPacket_encrypted_tag && payload) {
-        packet.encrypted.size = payload_size;
-        memcpy(packet.encrypted.bytes, payload, packet.encrypted.size);
-    }
     memcpy(packet.decoded.payload.bytes, payload, payload_size);
     packet.decoded.payload.size = payload_size;
     packet.decoded.want_response = false;

variants/esp32/diy/9m2ibr_aprs_lora_tracker/platformio.ini

@@ -1,12 +0,0 @@
-; 9M2IBR APRS LoRa Tracker: ESP32-WROOM-32 + EBYTE E22-400M30S
-; https://shopee.com.my/product/1095224/21692283917
-[env:9m2ibr_aprs_lora_tracker]
-extends = esp32_base
-board = esp32doit-devkit-v1
-board_level = extra
-build_flags =
-  ${esp32_base.build_flags}
-  -D PRIVATE_HW
-  -D EBYTE_E22
-  -D EBYTE_E22_900M30S ; Assume Tx power curve is identical to 900M30S as there is no documentation
-  -I variants/esp32/diy/9m2ibr_aprs_lora_tracker

variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.h

@@ -1,74 +0,0 @@
-/*
-
-  9M2IBR APRS LoRa Tracker: ESP32-WROOM-32 + EBYTE E22-400M30S
-  https://shopee.com.my/product/1095224/21692283917
-
-  Originally developed for LoRa_APRS_iGate and GPIO is similar to
-  https://github.com/richonguzman/LoRa_APRS_iGate/blob/main/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/board_pinout.h
-
-*/
-
-// OLED (may be different controllers depending on screen size)
-#define I2C_SDA 21
-#define I2C_SCL 22
-#define HAS_SCREEN 1 // Generates randomized BLE pin
-
-// GNSS: Ai-Thinker GP-02 BDS/GNSS module
-#define GPS_RX_PIN 16
-#define GPS_TX_PIN 17
-
-// Button
-#define BUTTON_PIN 15 // Right side button - if not available, set device.button_gpio to 0 from Meshtastic client
-
-// LEDs
-#define LED_PIN 13 // Tx LED
-#define USER_LED 2 // Rx LED
-
-// Buzzer
-#define PIN_BUZZER 33
-
-// Battery sense
-#define BATTERY_PIN 35
-#define ADC_MULTIPLIER 2.01 // 100k + 100k, and add 1% tolerance
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
-#define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
-
-// SPI
-#define LORA_SCK 18
-#define LORA_MISO 19
-#define LORA_MOSI 23
-
-// LoRa
-#define LORA_CS 5
-#define LORA_DIO0 26          // a No connect on the SX1262/SX1268 module
-#define LORA_RESET 27         // RST for SX1276, and for SX1262/SX1268
-#define LORA_DIO1 12          // IRQ for SX1262/SX1268
-#define LORA_DIO2 RADIOLIB_NC // BUSY for SX1262/SX1268
-#define LORA_DIO3             // NC, but used as TCXO supply by E22 module
-#define LORA_RXEN 32          // RF switch RX (and E22 LNA) control by ESP32 GPIO
-#define LORA_TXEN 25          // RF switch TX (and E22 PA) control by ESP32 GPIO
-
-// RX/TX for RFM95/SX127x
-#define RF95_RXEN LORA_RXEN
-#define RF95_TXEN LORA_TXEN
-// #define RF95_TCXO <GPIO#>
-
-// common pinouts for SX126X modules
-#define SX126X_CS 5
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_BUSY LORA_DIO2
-#define SX126X_RESET LORA_RESET
-#define SX126X_RXEN LORA_RXEN
-#define SX126X_TXEN LORA_TXEN
-
-// Support alternative modules if soldered in place of E22
-#define USE_RF95 // RFM95/SX127x
-#define USE_SX1262
-#define USE_SX1268
-#define USE_LLCC68
-
-// E22 TCXO support
-#ifdef EBYTE_E22
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
-#endif

variants/esp32/heltec_wireless_bridge/platformio.ini

@@ -1,7 +1,6 @@
 [env:heltec-wireless-bridge]
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base
-board_level = extra
 board = heltec_wifi_lora_32
 build_flags = 
   ${esp32_base.build_flags}

variants/esp32/trackerd/platformio.ini

@@ -1,6 +1,5 @@
 [env:trackerd]
 extends = esp32_base
-board_level = extra
 board = pico32
 board_build.f_flash = 80000000L
 

variants/esp32s3/rak_wismesh_tap_v2/pins_arduino.h

@@ -1,28 +0,0 @@
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include "variant.h"
-#include <stdint.h>
-
-#define USB_VID 0x303a
-#define USB_PID 0x1001
-
-// The default Wire will be mapped to PMU and RTC
-static const uint8_t SDA = 9;
-static const uint8_t SCL = 40;
-
-// Default SPI will be mapped to Radio
-static const uint8_t SS = 12;
-static const uint8_t MOSI = 11;
-static const uint8_t MISO = 10;
-static const uint8_t SCK = 13;
-
-#define SPI_MOSI (11)
-#define SPI_SCK (13)
-#define SPI_MISO (10)
-#define SPI_CS (12)
-
-// LEDs
-#define LED_BUILTIN LED_GREEN
-
-#endif /* Pins_Arduino_h */

variants/esp32s3/rak_wismesh_tap_v2/platformio.ini

@@ -1,87 +0,0 @@
-; rak_wismeshtap2 rak3112
-
-[rak_wismeshtap_s3]
-extends = esp32s3_base
-board = wiscore_rak3312
-board_check = true
-upload_protocol = esptool
-board_build.partitions = default_8MB.csv
-
-build_flags = 
-  ${esp32_base.build_flags} 
-  -D RAK3312
-  -D RAK_WISMESH_TAP_V2 
-  -I variants/esp32s3/rak_wismesh_tap_v2
-
-lib_deps =
-  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
-
-[ft5x06]
-extends = mesh_tab_base
-build_flags = 
-  -D LGFX_TOUCH=FT5x06
-  -D LGFX_TOUCH_I2C_FREQ=100000
-  -D LGFX_TOUCH_I2C_PORT=0
-  -D LGFX_TOUCH_I2C_ADDR=0x38
-  -D LGFX_TOUCH_I2C_SDA=9
-  -D LGFX_TOUCH_I2C_SCL=40
-  -D LGFX_TOUCH_RST=-1
-  -D LGFX_TOUCH_INT=39
-
-[env:rak_wismesh_tap_v2-tft]
-extends = rak_wismeshtap_s3
-
-build_flags =
-  ${rak_wismeshtap_s3.build_flags}
-  -D CONFIG_ARDUHAL_ESP_LOG
-  -D CONFIG_ARDUHAL_LOG_COLORS=1
-  -D CONFIG_DISABLE_HAL_LOCKS=1
-  -D LV_LVGL_H_INCLUDE_SIMPLE
-  -D LV_CONF_INCLUDE_SIMPLE
-  -D LV_COMP_CONF_INCLUDE_SIMPLE
-  -D LV_USE_SYSMON=0
-  -D LV_USE_PROFILER=0
-  -D LV_USE_PERF_MONITOR=0
-  -D LV_USE_MEM_MONITOR=0
-  -D LV_USE_LOG=0
-  -D LV_BUILD_TEST=0
-  -D USE_LOG_DEBUG
-  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
-  -D RADIOLIB_SPI_PARANOID=0
-  -D INPUTDRIVER_BUTTON_TYPE=0
-  -D HAS_SDCARD
-  -D HAS_SCREEN=0
-  -D HAS_TFT=1
-  -D USE_PIN_BUZZER=PIN_BUZZER
-  -D RAM_SIZE=5120
-  -D LGFX_DRIVER_TEMPLATE
-  -D LGFX_DRIVER=LGFX_GENERIC
-  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_GENERIC.h\"
-  -D LGFX_PIN_SCK=13
-  -D LGFX_PIN_MOSI=11
-  -D LGFX_PIN_MISO=10
-  -D LGFX_PIN_DC=42
-  -D LGFX_PIN_CS=12
-  -D LGFX_PIN_RST=-1
-  -D LGFX_PIN_BL=41
-  -D VIEW_320x240
-  -D USE_PACKET_API
-  ${ft5x06.build_flags}
-  -D LGFX_SCREEN_WIDTH=240
-  -D LGFX_SCREEN_HEIGHT=320
-  -D LGFX_PANEL=ST7789
-  -D LGFX_ROTATION=1
-  -D LGFX_TOUCH_X_MIN=0
-  -D LGFX_TOUCH_X_MAX=239
-  -D LGFX_TOUCH_Y_MIN=0
-  -D LGFX_TOUCH_Y_MAX=319
-  -D LGFX_TOUCH_ROTATION=2
-  -D LGFX_CFG_HOST=SPI3_HOST
-  -D MAP_FULL_REDRAW=1
-
-lib_deps =
-  ${rak_wismeshtap_s3.lib_deps}
-  ${device-ui_base.lib_deps}
-
-

variants/esp32s3/rak_wismesh_tap_v2/variant.h

@@ -1,71 +0,0 @@
-#ifndef _VARIANT_RAK_WISMESHTAP_V2_H
-#define _VARIANT_RAK_WISMESHTAP_V2_H
-
-#define I2C_SDA 9
-#define I2C_SCL 40
-
-#define USE_SX1262
-
-#define LORA_SCK 5
-#define LORA_MISO 3
-#define LORA_MOSI 6
-#define LORA_CS 7
-#define LORA_RESET 8
-
-#ifdef USE_SX1262
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 47
-#define SX126X_BUSY 48
-#define SX126X_RESET LORA_RESET
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#endif
-
-#define SX126X_POWER_EN (4)
-
-#define PIN_POWER_EN PIN_3V3_EN
-#define PIN_3V3_EN (14)
-
-#define LED_GREEN 46
-#define LED_BLUE 45
-
-#define PIN_LED1 LED_GREEN
-#define PIN_LED2 LED_BLUE
-
-#define LED_CONN LED_BLUE
-#define LED_PIN LED_GREEN
-#define ledOff(pin) pinMode(pin, INPUT)
-
-#define LED_STATE_ON 1 // State when LED is litted
-
-#define HAS_GPS 1
-#define GPS_TX_PIN 43
-#define GPS_RX_PIN 44
-
-#define SPI_MOSI (11)
-#define SPI_SCK (13)
-#define SPI_MISO (10)
-#define SPI_CS (12)
-
-#define HAS_BUTTON 1
-#define BUTTON_PIN 0
-
-#define CANNED_MESSAGE_MODULE_ENABLE 1
-#define USE_VIRTUAL_KEYBOARD 1
-
-#define BATTERY_PIN 1
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
-#define ADC_MULTIPLIER 1.667
-
-#define PIN_BUZZER 38
-
-#define HAS_SDCARD 1
-#define SDCARD_USE_SPI1 1
-#define SDCARD_CS 2
-
-#define SPI_FREQUENCY 40000000
-#define SPI_READ_FREQUENCY 16000000
-
-#define SD_SPI_FREQUENCY 50000000
-
-#endif

variants/esp32s3/tlora-pager/platformio.ini

@@ -26,7 +26,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   lewisxhe/SensorLib@0.3.1
   https://github.com/pschatzmann/arduino-audio-driver/archive/refs/tags/v0.1.3.zip
   https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
-  https://github.com/mverch67/RotaryEncoder/archive/25a59d5745a6645536f921427d80b08e78f886d4.zip
+  https://github.com/mverch67/RotaryEncoder
 
 [env:tlora-pager-tft]
 board_level = extra

variants/native/portduino/platformio.ini

@@ -3,10 +3,7 @@ extends = portduino_base
 build_flags = ${portduino_base.build_flags} -I variants/native/portduino
   -I /usr/include
 board = cross_platform
-lib_deps = 
-  ${portduino_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
-
+lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}
 
 [env:native]

variants/native/portduino/variant.h

@@ -4,7 +4,4 @@
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define HAS_GPS 1
 #define MAX_RX_TOPHONE settingsMap[maxtophone]
-#define MAX_NUM_NODES settingsMap[maxnodes]
-
-// RAK12002 RTC Module
-#define RV3028_RTC (uint8_t)0b1010010
+#define MAX_NUM_NODES settingsMap[maxnodes]

variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini

@@ -1,7 +1,6 @@
 ; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
 [env:gat562_mesh_trial_tracker]
 extends = nrf52840_base
-board_level = extra
 board = gat562_mesh_trial_tracker
 board_check = true
 build_flags = ${nrf52840_base.build_flags}

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -208,7 +208,7 @@ No longer populated on PCB
 #undef AREF_VOLTAGE
 #define AREF_VOLTAGE 3.0
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
-#define ADC_MULTIPLIER (4.916F)
+#define ADC_MULTIPLIER (4.90F)
 
 #define HAS_RTC 0
 #ifdef __cplusplus

variants/nrf52840/meshlink/platformio.ini

@@ -4,7 +4,6 @@
 [env:meshlink]
 extends = nrf52840_base
 board = meshlink
-board_level = extra
 ;board_check = true
 build_flags = ${nrf52840_base.build_flags}
   -I variants/nrf52840/meshlink

variants/nrf52840/meshlink_eink/platformio.ini

@@ -4,7 +4,6 @@
 [env:meshlink_eink]
 extends = nrf52840_base
 board = meshlink
-board_level = extra
 ;board_check = true
 build_flags = ${nrf52840_base.build_flags}
   -I variants/nrf52840/meshlink_eink

variants/nrf52840/rak4631/platformio.ini

@@ -22,7 +22,6 @@ lib_deps =
   https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
   rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
   beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
   https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)

variants/nrf52840/rak4631_eth_gw/platformio.ini

@@ -31,8 +31,7 @@ lib_deps =
   melopero/Melopero RV3028@^1.1.0
   https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
   rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
-  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
+  https://github.com/meshtastic/RAK12034-BMX160/archive/4821355fb10390ba8557dc43ca29a023bcfbb9d9.zip
   bblanchon/ArduinoJson @ 6.21.4
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds

variants/nrf52840/tracker-t1000-e/variant.h

@@ -124,7 +124,8 @@ extern "C" {
 #define GPS_RTC_INT (0 + 15)     // P0.15, normal is LOW, wake by HIGH
 #define GPS_RESETB_OUT (32 + 14) // P1.14, always input pull_up
 
-#define BATTERY_PIN 2 // P0.02/AIN0, BAT_ADC
+#define GPS_FIX_HOLD_TIME 15000 // ms
+#define BATTERY_PIN 2           // P0.02/AIN0, BAT_ADC
 #define BATTERY_IMMUTABLE
 #define ADC_MULTIPLIER (2.0F)
 // P0.04/AIN2 is VCC_ADC, P0.05/AIN3 is CHARGER_DET, P1.03 is CHARGE_STA, P1.04 is CHARGE_DONE

variants/nrf52840/wio-t1000-s/variant.h

@@ -123,6 +123,7 @@ extern "C" {
 #define GPS_RESETB_OUT (32 + 14) // P1.14, awlays input pull_up
 
 // #define GPS_THREAD_INTERVAL 50
+#define GPS_FIX_HOLD_TIME 15000 // ms
 
 #define BATTERY_PIN 2
 // #define ADC_CHANNEL ADC1_GPIO2_CHANNEL
@@ -156,4 +157,4 @@ extern "C" {
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif // _VARIANT_WIO_SDK_WM1110_
+#endif // _VARIANT_WIO_SDK_WM1110_

variants/rp2040/challenger_2040_lora/pins_arduino.h

@@ -1,79 +0,0 @@
-#pragma once
-
-#define PINS_COUNT (25u)
-#define NUM_DIGITAL_PINS (25u)
-#define NUM_ANALOG_INPUTS (4u)
-#define NUM_ANALOG_OUTPUTS (0u)
-#define ADC_RESOLUTION (12u)
-
-// LEDs
-#define PIN_LED (24u)
-
-// Serial
-#define PIN_SERIAL1_TX (16u)
-#define PIN_SERIAL1_RX (17u)
-
-// SPI
-#define PIN_SPI0_MISO (20u)
-#define PIN_SPI0_MOSI (23u)
-#define PIN_SPI0_SCK (22u)
-#define PIN_SPI0_SS (21u)
-
-// Connected to LoRa module
-#define PIN_SPI1_MISO (12u)
-#define PIN_SPI1_MOSI (11u)
-#define PIN_SPI1_SCK (10u)
-#define PIN_SPI1_SS (9u)
-#define RFM95W_SS (9u)
-#define RFM95W_DIO0 (14u)
-#define RFM95W_DIO1 (15u)
-#define RFM95W_DIO2 (18u)
-#define RFM95W_RST (13u)
-#define RFM95W_SPI SPI1
-
-// Wire
-#define PIN_WIRE0_SDA (0u)
-#define PIN_WIRE0_SCL (1u)
-
-// Not pinned out
-#define PIN_WIRE1_SDA (31u)
-#define PIN_WIRE1_SCL (31u)
-#define PIN_SERIAL2_RX (31u)
-#define PIN_SERIAL2_TX (31u)
-
-#define SERIAL_HOWMANY (1u)
-#define SPI_HOWMANY (2u)
-#define WIRE_HOWMANY (1u)
-
-#define LED_BUILTIN PIN_LED
-
-static const uint8_t D0 = (16u);
-static const uint8_t D1 = (17u);
-static const uint8_t D2 = (20u);
-static const uint8_t D3 = (23u);
-static const uint8_t D4 = (22u);
-static const uint8_t D5 = (2u);
-static const uint8_t D6 = (3u);
-static const uint8_t D7 = (0u);
-static const uint8_t D8 = (1u);
-static const uint8_t D9 = (4u);
-static const uint8_t D10 = (5u);
-static const uint8_t D11 = (6u);
-static const uint8_t D12 = (7u);
-static const uint8_t D13 = (8u);
-static const uint8_t D14 = (13u);
-static const uint8_t D15 = (14u);
-static const uint8_t D16 = (15u);
-static const uint8_t D17 = (18u);
-static const uint8_t D18 = (24u);
-
-static const uint8_t A0 = (26u);
-static const uint8_t A1 = (27u);
-static const uint8_t A2 = (28u);
-static const uint8_t A3 = (29u);
-static const uint8_t A4 = (19u);
-static const uint8_t A5 = (21u);
-
-#ifndef SS
-#define SS PIN_SPI1_SS
-#endif

variants/rp2040/challenger_2040_lora/platformio.ini

@@ -1,16 +0,0 @@
-[env:challenger_2040_lora]
-extends = rp2040_base
-board = challenger_2040_lora
-board_level = extra
-upload_protocol = picotool
-# add our variants files to the include and src paths
-build_flags = 
-  ${rp2040_base.build_flags} 
-  -D PRIVATE_HW
-  -I variants/rp2040/challenger_2040_lora
-  -D DEBUG_RP2040_PORT=Serial
-  -D HW_SPI1_DEVICE
-lib_deps =
-  ${rp2040_base.lib_deps}
-debug_build_flags = ${rp2040_base.build_flags}
-debug_tool = cmsis-dap ; for e.g. Picotool

variants/rp2040/challenger_2040_lora/variant.h

@@ -1,39 +0,0 @@
-// Define SS for compatibility with libraries expecting a default SPI chip select pin
-
-#define ARDUINO_ARCH_AVR
-
-#define EXT_NOTIFY_OUT 0xFFFFFFFF
-#define BUTTON_PIN 0xFFFFFFFF
-
-#define LED_PIN PIN_LED
-
-#define USE_RF95 // RFM95/SX127x
-
-#undef LORA_SCK
-#undef LORA_MISO
-#undef LORA_MOSI
-#undef LORA_CS
-
-// https://gitlab.com/invectorlabs/hw/challenger_rp2040_lora
-#define LORA_SCK 10  // Clock
-#define LORA_CS 9    // Chip Select
-#define LORA_MOSI 11 // Serial Data Out
-#define LORA_MISO 12 // Serial Data In
-
-#define LORA_RESET 13 // Reset
-
-#define LORA_DIO0 14         // DIO0
-#define LORA_DIO1 15         // DIO1
-#define LORA_DIO2 18         // DIO2
-#define LORA_DIO3 0xFFFFFFFF // Not connected
-#define LORA_DIO4 0xFFFFFFFF // Not connected
-#define LORA_DIO5 0xFFFFFFFF // Not connected
-
-#ifdef USE_SX1262
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_BUSY LORA_DIO2
-#define SX126X_RESET LORA_RESET
-#define SX126X_DIO2_AS_RF_SWITCH
-// #define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#endif

variants/rp2040/ec_catsniffer/platformio.ini

@@ -1,7 +1,6 @@
 [env:catsniffer]
 extends = rp2040_base
 board = rpipico
-board_level = extra
 upload_protocol = picotool
 build_flags = 
   ${rp2040_base.build_flags}

variants/stm32/CDEBYTE_E77-MBL/platformio.ini

@@ -12,5 +12,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
   -DMESHTASTIC_EXCLUDE_I2C=1
   -DMESHTASTIC_EXCLUDE_GPS=1
+  ;-DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF
+  ;-DCFG_DEBUG
 
 upload_port = stlink

variants/stm32/CDEBYTE_E77-MBL/rfswitch.h

@@ -1,9 +0,0 @@
-// From E77-900M22S Product Specification
-// https://www.cdebyte.com/pdf-down.aspx?id=2963
-// Note 1: PA6 and PA7 pins are used as internal control RF switches of the module, PA6 = RF_TXEN, PA7 = RF_RXEN, RF_TXEN=1
-// RF_RXEN=0 is the transmit channel, and RF_TXEN=0 RF_RXEN=1 is the receiving channel
-
-static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA7, PA6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[4] = {
-    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

variants/stm32/CDEBYTE_E77-MBL/variant.h

@@ -18,4 +18,5 @@ Do not expect a working Meshtastic device with this target.
 #define LED_PIN PB4 // LED1
 // #define LED_PIN PB3 // LED2
 #define LED_STATE_ON 1
+
 #endif

variants/stm32/rak3172/platformio.ini

@@ -6,14 +6,10 @@ board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
 build_flags =
   ${stm32_base.build_flags}
   -Ivariants/stm32/rak3172
-  -DRAK3172
-  -DENABLE_HWSERIAL1
-  -DPIN_SERIAL1_RX=PB7
-  -DPIN_SERIAL1_TX=PB6
   -DPIN_WIRE_SDA=PA11
   -DPIN_WIRE_SCL=PA12
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
   -DMESHTASTIC_EXCLUDE_I2C=1
   -DMESHTASTIC_EXCLUDE_GPS=1
-
+  ;-DCFG_DEBUG
 upload_port = stlink

variants/stm32/rak3172/rfswitch.h

@@ -1,7 +0,0 @@
-// Pins from https://forum.rakwireless.com/t/rak3172-internal-schematic/4557/2
-// PB8, PC13
-
-static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PB8, PC13, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[4] = {
-    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

variants/stm32/wio-e5/rfswitch.h

@@ -1,8 +0,0 @@
-/* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
- * Wio-E5 module ONLY transmits through RFO_HP
- * Receive: PA4=1, PA5=0
- * Transmit(high output power, SMPS mode): PA4=0, PA5=1 */
-static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA4, PA5, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[4] = {
-    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 7
-build = 9
+build = 7