Extra extra

* Ensure the mqtt address is an IPv4 (or at least not a domain) before determining it's private.

* check address length

.devcontainer/Dockerfile

@@ -0,0 +1,25 @@
+FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
+
+# [Optional] Uncomment this section to install additional packages.
+RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
+    && apt-get -y install --no-install-recommends \
+    ca-certificates \
+    g++ \
+    git \
+    libbluetooth-dev \
+    libgpiod-dev \
+    liborcania-dev \
+    libssl-dev \
+    libulfius-dev \
+    libyaml-cpp-dev \
+    pipx \
+    pkg-config \
+    python3 \
+    python3-pip \
+    python3-venv \
+    python3-wheel \
+    wget \
+    zip \
+    && apt-get clean && rm -rf /var/lib/apt/lists/*
+
+RUN pipx install platformio==6.1.15

.devcontainer/devcontainer.json

@@ -0,0 +1,25 @@
+// For format details, see https://aka.ms/devcontainer.json. For config options, see the
+// README at: https://github.com/devcontainers/templates/tree/main/src/cpp
+{
+  "name": "Meshtastic Firmware Dev",
+  "build": {
+    "dockerfile": "Dockerfile"
+  },
+  "features": {
+    "ghcr.io/devcontainers/features/python:1": {
+      "installTools": true,
+      "version": "latest"
+    }
+  },
+  "customizations": {
+    "vscode": {
+      "extensions": ["ms-vscode.cpptools", "platformio.platformio-ide"]
+    }
+  },
+
+  // Use 'forwardPorts' to make a list of ports inside the container available locally.
+  "forwardPorts": [4403],
+
+  // Run commands to prepare the container for use
+  "postCreateCommand": ".devcontainer/setup.sh"
+}

.devcontainer/setup.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+git submodule update --init

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,9 +49,24 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
+        - Heltec Mesh Node T114
+        - Heltec Vision Master E213
+        - Heltec Vision Master E290
+        - Heltec Vision Master T190
+        - Nano G1
+        - Nano G1 Explorer
+        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
+        - Seeed Wio Tracker 1110
+        - Seeed Card Tracker T1000-E
+        - Station G1
+        - Station G2
+        - unPhone
+        - CanaryOne
+        - Chatter
+        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,6 +18,7 @@ body:
         - ESP32
         - RP2040
         - Linux Native
+        - Cross-Platform
         - other
     validations:
       required: true

.github/actions/build-variant/action.yml

@@ -0,0 +1,94 @@
+name: Setup Build Variant Composite Action
+description: Variant build actions for Meshtastic Platform IO steps
+
+inputs:
+  board:
+    description: The board to build for
+    required: true
+  github_token:
+    description: GitHub token
+    required: true
+  build-script-path:
+    description: Path to the build script
+    required: true
+  remove-debug-flags:
+    description: A space separated list of files to remove debug flags from
+    required: false
+    default: ""
+  ota-firmware-source:
+    description: The OTA firmware file to pull
+    required: false
+    default: ""
+  ota-firmware-target:
+    description: The target path to store the OTA firmware file
+    required: false
+    default: ""
+  artifact-paths:
+    description: A newline separated list of paths to store as artifacts
+    required: false
+    default: ""
+  include-web-ui:
+    description: Include the web UI in the build
+    required: false
+    default: "false"
+  arch:
+    description: Processor arch name
+    required: true
+    default: "esp32"
+
+runs:
+  using: composite
+  steps:
+    - name: Build base
+      id: base
+      uses: ./.github/actions/setup-base
+
+    - name: Pull web ui
+      if: inputs.include-web-ui == 'true'
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: meshtastic/web
+        file: build.tar
+        target: build.tar
+        token: ${{ inputs.github_token }}
+
+    - name: Unpack web ui
+      if: inputs.include-web-ui == 'true'
+      shell: bash
+      run: |
+        tar -xf build.tar -C data/static
+        rm build.tar
+
+    - name: Remove debug flags for release
+      shell: bash
+      if: inputs.remove-debug-flags != ''
+      run: |
+        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
+          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
+        done
+
+    - name: Build ${{ inputs.board }}
+      shell: bash
+      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
+
+    - name: Pull OTA Firmware
+      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: meshtastic/firmware-ota
+        file: ${{ inputs.ota-firmware-source }}
+        target: ${{ inputs.ota-firmware-target }}
+        token: ${{ inputs.github_token }}
+
+    - name: Get release version string
+      shell: bash
+      run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+      id: version
+
+    - name: Store binaries as an artifact
+      uses: actions/upload-artifact@v4
+      with:
+        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+        overwrite: true
+        path: |
+          ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -11,10 +11,15 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Install dependencies 
+    - name: Uncomment build epoch
       shell: bash
       run: |
-        sudo apt-get -y update 
+        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
+    - name: Install dependencies
+      shell: bash
+      run: |
+        sudo apt-get -y update --fix-missing
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev
 
     - name: Setup Python
@@ -22,19 +27,21 @@ runs:
       with:
         python-version: 3.x
 
-    - name: Cache python libs
-      uses: actions/cache@v4
-      id: cache-pip # needed in if test
-      with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip
+    # - name: Cache python libs
+    #   uses: actions/cache@v4
+    #   id: cache-pip # needed in if test
+    #   with:
+    #     path: ~/.cache/pip
+    #     key: ${{ runner.os }}-pip
 
     - name: Upgrade python tools
       shell: bash
       run: |
         python -m pip install --upgrade pip
-        pip install -U platformio adafruit-nrfutil
-        pip install -U meshtastic --pre
+        pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
+        pip install -U platformio adafruit-nrfutil --no-build-isolation
+        pip install -U poetry --no-build-isolation
+        pip install -U meshtastic --pre --no-build-isolation
 
     - name: Upgrade platformio
       shell: bash

.github/dependabot.yml

@@ -0,0 +1,26 @@
+version: 2
+updates:
+  - package-ecosystem: docker
+    directory: devcontainer
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: docker
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: gitsubmodule
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: github-actions
+    directory: /.github/workflows
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,9 +1,9 @@
+### ❌ (Please delete all these tips and replace them with your text) ❌
+
 ## Thank you for sending in a pull request, here's some tips to get started!
 
-(Please delete all these tips and replace with your text)
-
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
-  to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
+  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
@@ -12,3 +12,4 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
+- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord

.github/workflows/build_esp32.yml

@@ -12,52 +12,23 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/firmware-ota
-          file: firmware.bin
-          target: release/bleota.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware.bin
+          ota-firmware-target: release/bleota.bin
+          artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true
+          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -14,50 +14,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+      - name: Build ESP32-C3
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
-      - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/firmware-ota
-          file: firmware-c3.bin
-          target: release/bleota-c3.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-c3.bin
+          ota-firmware-target: release/bleota-c3.bin
+          artifact-paths: |
             release/*.bin
             release/*.elf
+          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -0,0 +1,36 @@
+name: Build ESP32-C6
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c6:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build ESP32-C6
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-c3.bin
+          ota-firmware-target: release/bleota-c3.bin
+          artifact-paths: |
+            release/*.bin
+            release/*.elf
+          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -12,50 +12,23 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+      - name: Build ESP32-S3
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
-      - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/firmware-ota
-          file: firmware-s3.bin
-          target: release/bleota-s3.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-s3.bin
+          ota-firmware-target: release/bleota-s3.bin
+          artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true
+          arch: esp32s3

.github/workflows/build_native.yml

@@ -10,10 +10,10 @@ jobs:
   build-native:
     runs-on: ubuntu-latest
     steps:
-      - name: Install libbluetooth
+      - name: Install libs needed for native build
         shell: bash
         run: |
-          sudo apt-get update
+          sudo apt-get update --fix-missing
           sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
@@ -67,7 +67,7 @@ jobs:
       - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           file: ./Dockerfile
@@ -77,7 +77,7 @@ jobs:
       - name: Docker build and push
         if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           file: ./Dockerfile

.github/workflows/build_nrf52.yml

@@ -12,23 +12,17 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
       - name: Build NRF52
-        run: bin/build-nrf52.sh ${{ inputs.board }}
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-nrf52.sh
+          artifact-paths: |
+            release/*.hex
             release/*.uf2
             release/*.elf
             release/*.zip
+          arch: nrf52840

.github/workflows/build_raspbian.yml

@@ -13,6 +13,7 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
+          apt-get update -y --fix-missing
           apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code

.github/workflows/build_raspbian_armv7l.yml

@@ -13,6 +13,7 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
+          apt-get update -y --fix-missing
           apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code

.github/workflows/build_rpi2040.yml

@@ -12,22 +12,15 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
       - name: Build Raspberry Pi 2040
-        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-rpi2040.sh
+          artifact-paths: |
             release/*.uf2
             release/*.elf
+          arch: rp2040

.github/workflows/build_stm32.yml

@@ -0,0 +1,27 @@
+name: Build STM32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-stm32:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build STM32WL
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-stm32.sh
+          artifact-paths: |
+            release/*.hex
+            release/*.bin
+            release/*.elf
+          arch: stm32

.github/workflows/generate-userprefs.yml

@@ -0,0 +1,35 @@
+name: Generate UsersPrefs JSON manifest
+
+on:
+  push:
+    paths:
+      - userPrefs.h
+    branches:
+      - master
+
+jobs:
+  generate-userprefs:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Install Clang
+        run: sudo apt-get install -y clang
+
+      - name: Install trunk
+        run: curl https://get.trunk.io -fsSL | bash
+
+      - name: Generate userPrefs.jsom
+        run: python3 ./bin/build-userprefs-json.py
+
+      - name: Trunk format json
+        run: trunk format userPrefs.json
+
+      - name: Commit userPrefs.json
+        run: |
+          git config --global user.email "actions@github.com"
+          git config --global user.name "GitHub Actions"
+          git add userPrefs.json
+          git commit -m "Update userPrefs.json"
+          git push

.github/workflows/main_matrix.yml

@@ -1,7 +1,7 @@
 name: CI
-#concurrency:
-#  group: ${{ github.ref }}
-#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
+concurrency:
+  group: ci-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -24,7 +24,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, check]
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
     runs-on: ubuntu-latest
     steps:
       - id: checkout
@@ -32,15 +32,21 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          echo "$TARGETS"
+          if [[ "${{ github.head_ref }}" == "" ]]; then
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          else  
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
+          fi
+          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} Head: ${{ github.head_ref }} Ref: ${{ github.ref }} Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
       esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
       esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
+      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   check:
@@ -50,6 +56,7 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
       - uses: actions/checkout@v4
       - name: Build base
@@ -85,6 +92,15 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
+  build-esp32-c6:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
+    uses: ./.github/workflows/build_esp32_c6.yml
+    with:
+      board: ${{ matrix.board }}
+
   build-nrf52:
     needs: setup
     strategy:
@@ -103,6 +119,15 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
+  build-stm32:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
+    uses: ./.github/workflows/build_stm32.yml
+    with:
+      board: ${{ matrix.board }}
+
   package-raspbian:
     uses: ./.github/workflows/package_raspbian.yml
 
@@ -114,6 +139,7 @@ jobs:
 
   after-checks:
     runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [check]
     steps:
       - name: Checkout code
@@ -126,17 +152,20 @@ jobs:
     permissions:
       contents: write
       pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
         build-esp32,
         build-esp32-s3,
         build-esp32-c3,
+        build-esp32-c6,
         build-nrf52,
         build-rpi2040,
-        package-raspbian,
-        package-raspbian-armv7l,
-        package-native
+        build-stm32,
       ]
     steps:
       - name: Checkout code
@@ -148,6 +177,7 @@ jobs:
       - uses: actions/download-artifact@v4
         with:
           path: ./
+          pattern: firmware-${{matrix.arch}}-*
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -158,29 +188,28 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{ steps.version.outputs.version }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
           overwrite: true
           path: |
             ./firmware-*.bin
             ./firmware-*.uf2
+            ./firmware-*.hex
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
-            ./meshtasticd_linux_*
-            ./config-dist.yaml
             ./littlefs-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 90
+          retention-days: 30
 
       - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{ steps.version.outputs.version }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
           merge-multiple: true
           path: ./output
 
@@ -194,32 +223,34 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
-      - name: Create request artifacts
-        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
-        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
-        uses: gavv/pull-request-artifacts@v2.1.0
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
         with:
-          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
-          artifacts-repo: meshtastic/artifacts
-          artifacts-branch: device
-          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}
 
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [gather-artifacts, after-checks]
+    outputs:
+      upload_url: ${{ steps.create_release.outputs.upload_url }}
+    needs: [
+        gather-artifacts,
+        package-raspbian,
+        package-raspbian-armv7l,
+        package-native,
+      ]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -233,42 +264,6 @@ jobs:
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
-      - uses: actions/download-artifact@v4
-        with:
-          name: firmware-${{ steps.version.outputs.version }}
-          merge-multiple: true
-          path: ./output
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
-
-      - uses: actions/download-artifact@v4
-        with:
-          name: debug-elfs-${{ steps.version.outputs.version }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip Elfs
-        run: zip -j -9 -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
       - name: Create release
         uses: actions/create-release@v1
         id: create_release
@@ -282,25 +277,16 @@ jobs:
         env:
           GITHUB_TOKEN: ${{ github.token }}
 
-      - name: Add bins to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
+      - name: Download deb files
+        uses: actions/download-artifact@v4
         with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
-          asset_name: firmware-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
 
-      - name: Add debug elfs to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
-          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
 
       - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
@@ -337,7 +323,79 @@ jobs:
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v6
+        uses: peter-evans/create-pull-request@v7
         with:
+          title: Bump version.properties
           add-paths: |
             version.properties
+
+  release-firmware:
+    strategy:
+      fail-fast: false
+      matrix:
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-artifacts]
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Setup Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
+
+      - uses: actions/download-artifact@v4
+        with:
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Display structure of downloaded files
+        run: ls -lR
+
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
+          asset_path: ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
+          asset_path: ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-native
     steps:
       - name: Checkout code

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian
     steps:
       - name: Checkout code

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code

.github/workflows/sec_sast_semgrep_cron.yml

@@ -12,7 +12,7 @@ jobs:
   semgrep-full:
     runs-on: ubuntu-latest
     container:
-      image: returntocorp/semgrep
+      image: semgrep/semgrep
 
     steps:
       # step 1

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,9 +4,9 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     container:
-      image: returntocorp/semgrep
+      image: semgrep/semgrep
 
     steps:
       # step 1

.github/workflows/tests.yml

@@ -0,0 +1,106 @@
+name: End to end tests
+
+on:
+  schedule:
+    - cron: "0 0 * * *" # Run every day at midnight
+  workflow_dispatch: {}
+
+jobs:
+  test-simulator:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          sudo apt-get update --fix-missing
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Native
+        run: bin/build-native.sh
+
+      # We now run integration test before other build steps (to quickly see runtime failures)
+      - name: Build for native
+        run: platformio run -e native
+
+      - name: Integration test
+        run: |
+          .pio/build/native/program & sleep 10 # 5 seconds was not enough
+          echo "Simulator started, launching python test..."
+          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+      - name: PlatformIO Tests
+        run: platformio test -e native --junit-output-path testreport.xml
+
+      - name: Test Report
+        uses: dorny/test-reporter@v1.9.1
+        if: success() || failure() # run this step even if previous step failed
+        with:
+          name: PlatformIO Tests
+          path: testreport.xml
+          reporter: java-junit
+
+  hardware-tests:
+    runs-on: test-runner
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      # - uses: actions/setup-python@v5
+      #   with:
+      #     python-version: '3.10'
+
+      # pipx install "setuptools<72"
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          pipx install adafruit-nrfutil
+          pipx install poetry
+          pipx install meshtastic --pip-args=--pre
+
+      - name: Install PlatformIO from script
+        shell: bash
+        run: |
+          curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
+          python3 get-platformio.py
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          export PATH=$PATH:$HOME/.local/bin
+          pio upgrade
+
+      - name: Setup Node
+        uses: actions/setup-node@v4
+        with:
+          node-version: 18
+
+      - name: Setup pnpm
+        uses: pnpm/action-setup@v4
+        with:
+          version: latest
+
+      - name: Install dependencies, setup devices and run
+        shell: bash
+        run: |
+          git submodule update --init --recursive
+          cd meshtestic/
+          pnpm install
+          pnpm run setup
+          pnpm run test

.github/workflows/update_protobufs.yml

@@ -1,4 +1,4 @@
-name: "Update protobufs and regenerate classes"
+name: Update protobufs and regenerate classes
 on: workflow_dispatch
 
 jobs:
@@ -17,17 +17,18 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
-          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.9-linux-x86.tar.gz
+          mv nanopb-0.4.9-linux-x86 nanopb-0.4.9
 
       - name: Re-generate protocol buffers
         run: |
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v6
+        uses: peter-evans/create-pull-request@v7
         with:
+          title: Update protobufs and classes
           add-paths: |
             protobufs
             src/mesh

.gitignore

@@ -1,6 +1,4 @@
 .pio
-main/configuration.h
-main/credentials.h
 
 # ignore vscode IDE settings files
 .vscode/*
@@ -32,4 +30,4 @@ release/
 .vscode/extensions.json
 /compile_commands.json
 src/mesh/raspihttp/certificate.pem
-src/mesh/raspihttp/private_key.pem
+src/mesh/raspihttp/private_key.pem

.gitmodules

@@ -1,3 +1,6 @@
 [submodule "protobufs"]
 	path = protobufs
 	url = https://github.com/meshtastic/protobufs.git
+[submodule "meshtestic"]
+	path = meshtestic
+	url = https://github.com/meshtastic/meshTestic

.gitpod.yml

@@ -0,0 +1,2 @@
+tasks:
+  - init: pip install platformio && pip install --upgrade pip

.semgrepignore

@@ -1,2 +1,2 @@
 .github/workflows/main_matrix.yml
-src/mesh/compression/unishox2.c
+src/mesh/compression/unishox2.cpp

.trunk/trunk.yaml

@@ -1,36 +1,40 @@
 version: 0.1
 cli:
-  version: 1.22.1
+  version: 1.22.6
 plugins:
   sources:
     - id: trunk
-      ref: v1.5.0
+      ref: v1.6.3
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.76.3
+    - trufflehog@3.82.6
     - yamllint@1.35.1
-    - bandit@1.7.8
-    - checkov@3.2.95
+    - bandit@1.7.10
+    - checkov@3.2.256
     - terrascan@1.19.1
-    - trivy@0.51.1
+    - trivy@0.55.2
     #- trufflehog@3.63.2-rc0
-    - taplo@0.8.1
-    - ruff@0.4.4
+    - taplo@0.9.3
+    - ruff@0.6.8
     - isort@5.13.2
-    - markdownlint@0.40.0
-    - oxipng@9.1.1
+    - markdownlint@0.42.0
+    - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.0
-    - flake8@7.0.0
+    - actionlint@1.7.3
+    - flake8@7.1.1
     - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.4.2
+    - black@24.8.0
     - git-diff-check
-    - gitleaks@8.18.2
+    - gitleaks@8.20.0
     - clang-format@16.0.3
-    - prettier@3.2.5
+    - prettier@3.3.3
+  ignore:
+    - linters: [ALL]
+      paths:
+        - bin/**
 runtimes:
   enabled:
     - python@3.10.8

.vscode/extensions.json

@@ -2,8 +2,9 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-		"ms-vscode.cpptools",
-        "platformio.platformio-ide",
-        "trunk.io"
+        "platformio.platformio-ide"
     ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
 }

.vscode/settings.json

@@ -4,5 +4,8 @@
   "trunk.enableWindows": true,
   "files.insertFinalNewline": false,
   "files.trimFinalNewlines": false,
-  "cmake.configureOnOpen": false
+  "cmake.configureOnOpen": false,
+  "[cpp]": {
+    "editor.defaultFormatter": "trunk.io"
+  }
 }

CONTRIBUTING.md

@@ -0,0 +1,47 @@
+# Contributing to Meshtastic Firmware
+
+We're excited that you're interested in contributing to the Meshtastic firmware! This document provides a high-level overview of how you can get involved.
+
+## Important First Steps
+
+Before you begin, please:
+
+1. **Read our documentation**: Our [official documentation](https://meshtastic.org/docs/) is a crucial resource. It contains essential information about the project.
+
+2. **Check out the firmware build guide**: For specific instructions on setting up your development environment and building the firmware, refer to our [Firmware Build Guide](https://meshtastic.org/docs/development/firmware/build/).
+
+3. Read our [Code of Conduct](https://meshtastic.org/docs/legal/conduct/)
+
+4. Join our [Discord community](https://discord.com/invite/ktMAKGBnBs) to connect with developers and other contributors to get help.
+
+## Getting Help and Discussing Ideas
+
+We encourage open communication and discussion before diving into code changes:
+
+1. **Use GitHub Discussions**: For new ideas, questions, or to discuss potential changes, start a conversation in our [GitHub Discussions](https://github.com/meshtastic/firmware/discussions) first. This helps us collaborate and avoid duplicate work.
+
+2. **Join our Discord**: For real-time chat and quick questions, join our [Discord server](https://discord.com/invite/ktMAKGBnBs). It's a great place to get help and connect with other developers and the community.
+
+3. **Reporting Issues**: If you've identified a bug, please use our bug report template when creating a new issue in the [issue tracker](https://github.com/meshtastic/firmware/issues). Ensure you've searched existing issues to avoid duplicates.
+
+## Making Contributions
+
+> [!IMPORTANT]
+> Before making any contributions, you must sign our Contributor License Agreement (CLA). You can do this by visiting https://cla-assistant.io/meshtastic/firmware. Be sure to use the GitHub account you will use to submit your contributions when signing.
+
+1. Fork the repository
+2. Create a new branch for your feature or bug fix
+3. Make your changes
+4. Test your changes thoroughly
+5. Create a pull request with a clear description, using the provided template, of your changes. Be sure to enable "Allow edits from maintainers".
+
+## Coding Standards
+
+To ensure consistent code formatting across the project:
+
+1. Install the [Trunk](https://marketplace.visualstudio.com/items?itemName=Trunk.io) extension for Visual Studio Code.
+2. Before submitting your changes, run `trunk fmt` to automatically format your code according to our standards.
+
+Adhering to these formatting guidelines helps maintain code consistency and makes the review process smoother.
+
+Thank you for contributing to Meshtastic!

Dockerfile

@@ -7,8 +7,6 @@ ENV TZ=Etc/UTC
 # > At the moment, setting "LANG=C" on a Linux system *fundamentally breaks Python 3*, and that's not OK.
 ENV LANG C.UTF-8
 
-SHELL ["/bin/bash", "-o", "pipefail", "-c"]
-
 # Install build deps
 USER root
 
@@ -24,10 +22,10 @@ USER mesh
 
 WORKDIR /tmp/firmware
 RUN python3 -m venv /tmp/firmware 
-RUN source ./bin/activate && pip3 install --no-cache-dir -U platformio==6.1.14
+RUN bash -o pipefail -c "source bin/activate; pip3 install --no-cache-dir -U platformio==6.1.15"
 # trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
 COPY --chown=mesh:mesh . /tmp/firmware
-RUN source ./bin/activate && chmod +x /tmp/firmware/bin/build-native.sh && ./bin/build-native.sh
+RUN bash -o pipefail -c "source ./bin/activate && bash ./bin/build-native.sh"
 RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 

SECURITY.md

@@ -0,0 +1,12 @@
+# Security Policy
+
+## Supported Versions
+
+| Firmware Version | Supported          |
+| ---------------- | ------------------ |
+| 2.5.x            | :white_check_mark: |
+| <= 2.4.x         | :x:                |
+
+## Reporting a Vulnerability
+
+We support the private reporting of potential security vulnerabilities. Please go to the Security tab to file a report with a description of the potential vulnerability and reproduction scripts (preferred) or steps, and our developers will review.

arch/esp32/esp32.ini

@@ -2,10 +2,10 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.7.0
+platform = platformio/espressif32@6.9.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -46,8 +46,9 @@ lib_deps =
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.2
   https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
-  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
+  lewisxhe/XPowersLib@^0.2.6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
 
 lib_ignore = 
   segger_rtt

arch/esp32/esp32c6.ini

@@ -0,0 +1,40 @@
+[esp32c6_base]
+extends = esp32_base
+platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
+build_flags =
+  ${arduino_base.build_flags}
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DMESHTASTIC_EXCLUDE_WEBSERVER
+  ;-DDEBUG_HEAP
+  ; TEMP
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  lewisxhe/XPowersLib@^0.2.6
+  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
+
+build_src_filter = 
+ ${esp32_base.build_src_filter} -<mesh/http> 
+
+monitor_speed = 460800
+monitor_filters = esp32_c3_exception_decoder
+
+lib_ignore =
+  NonBlockingRTTTL
+  NimBLE-Arduino
+  libpax
+  

arch/nrf52/cpp_overrides/lfs_util.h

@@ -0,0 +1,208 @@
+/*
+ * lfs utility functions
+ *
+ * Copyright (c) 2017, Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// MESHTASTIC/@geeksville note: This file is copied from the Adafruit nrf52 arduino lib.  And we use a special -include in
+// nrf52.ini to load it before EVERY file we do this hack because the default definitions for LFS_ASSERT are quite poor and we
+// don't want to fork the adafruit lib (again) and send in a PR that they probably won't merge anyways. This file might break if
+// they ever update lfs.util on their side, in which case we'll need to update this file to match their new version. The version
+// this is a copy from is almost exactly
+// https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/c25d93268a3b9c23e9a1ccfcaf9b208beca624ca/libraries/Adafruit_LittleFS/src/littlefs/lfs_util.h
+
+#ifndef LFS_UTIL_H
+#define LFS_UTIL_H
+
+// Users can override lfs_util.h with their own configuration by defining
+// LFS_CONFIG as a header file to include (-DLFS_CONFIG=lfs_config.h).
+//
+// If LFS_CONFIG is used, none of the default utils will be emitted and must be
+// provided by the config file. To start I would suggest copying lfs_util.h and
+// modifying as needed.
+#ifdef LFS_CONFIG
+#define LFS_STRINGIZE(x) LFS_STRINGIZE2(x)
+#define LFS_STRINGIZE2(x) #x
+#include LFS_STRINGIZE(LFS_CONFIG)
+#else
+
+// System includes
+#include <stdbool.h>
+#include <stdint.h>
+#include <string.h>
+
+#ifndef LFS_NO_MALLOC
+#include <stdlib.h>
+#endif
+#ifndef LFS_NO_ASSERT
+#include <assert.h>
+#endif
+
+#if !defined(LFS_NO_DEBUG) || !defined(LFS_NO_WARN) || !defined(LFS_NO_ERROR)
+#include <stdio.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Macros, may be replaced by system specific wrappers. Arguments to these
+// macros must not have side-effects as the macros can be removed for a smaller
+// code footprint
+
+// Logging functions
+#ifndef LFS_NO_DEBUG
+
+void logLegacy(const char *level, const char *fmt, ...);
+#define LFS_DEBUG(fmt, ...) logLegacy("DEBUG", "lfs debug:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_DEBUG(fmt, ...)
+#endif
+
+#ifndef LFS_NO_WARN
+#define LFS_WARN(fmt, ...) logLegacy("WARN", "lfs warn:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_WARN(fmt, ...)
+#endif
+
+#ifndef LFS_NO_ERROR
+#define LFS_ERROR(fmt, ...) logLegacy("ERROR", "lfs error:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_ERROR(fmt, ...)
+#endif
+
+// Runtime assertions
+#ifndef LFS_NO_ASSERT
+#define LFS_ASSERT(test) assert(test)
+#else
+extern void lfs_assert(const char *reason);
+#define LFS_ASSERT(test)                                                                                                         \
+    if (!(test))                                                                                                                 \
+    lfs_assert(#test)
+#endif
+
+// Builtin functions, these may be replaced by more efficient
+// toolchain-specific implementations. LFS_NO_INTRINSICS falls back to a more
+// expensive basic C implementation for debugging purposes
+
+// Min/max functions for unsigned 32-bit numbers
+static inline uint32_t lfs_max(uint32_t a, uint32_t b)
+{
+    return (a > b) ? a : b;
+}
+
+static inline uint32_t lfs_min(uint32_t a, uint32_t b)
+{
+    return (a < b) ? a : b;
+}
+
+// Find the next smallest power of 2 less than or equal to a
+static inline uint32_t lfs_npw2(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
+    return 32 - __builtin_clz(a - 1);
+#else
+    uint32_t r = 0;
+    uint32_t s;
+    a -= 1;
+    s = (a > 0xffff) << 4;
+    a >>= s;
+    r |= s;
+    s = (a > 0xff) << 3;
+    a >>= s;
+    r |= s;
+    s = (a > 0xf) << 2;
+    a >>= s;
+    r |= s;
+    s = (a > 0x3) << 1;
+    a >>= s;
+    r |= s;
+    return (r | (a >> 1)) + 1;
+#endif
+}
+
+// Count the number of trailing binary zeros in a
+// lfs_ctz(0) may be undefined
+static inline uint32_t lfs_ctz(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && defined(__GNUC__)
+    return __builtin_ctz(a);
+#else
+    return lfs_npw2((a & -a) + 1) - 1;
+#endif
+}
+
+// Count the number of binary ones in a
+static inline uint32_t lfs_popc(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
+    return __builtin_popcount(a);
+#else
+    a = a - ((a >> 1) & 0x55555555);
+    a = (a & 0x33333333) + ((a >> 2) & 0x33333333);
+    return (((a + (a >> 4)) & 0xf0f0f0f) * 0x1010101) >> 24;
+#endif
+}
+
+// Find the sequence comparison of a and b, this is the distance
+// between a and b ignoring overflow
+static inline int lfs_scmp(uint32_t a, uint32_t b)
+{
+    return (int)(unsigned)(a - b);
+}
+
+// Convert from 32-bit little-endian to native order
+static inline uint32_t lfs_fromle32(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_LITTLE_ENDIAN) ||                                \
+                                    (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_LITTLE_ENDIAN) ||                          \
+                                    (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__))
+    return a;
+#elif !defined(LFS_NO_INTRINSICS) &&                                                                                             \
+    ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_BIG_ENDIAN) || (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_BIG_ENDIAN) || \
+     (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__))
+    return __builtin_bswap32(a);
+#else
+    return (((uint8_t *)&a)[0] << 0) | (((uint8_t *)&a)[1] << 8) | (((uint8_t *)&a)[2] << 16) | (((uint8_t *)&a)[3] << 24);
+#endif
+}
+
+// Convert to 32-bit little-endian from native order
+static inline uint32_t lfs_tole32(uint32_t a)
+{
+    return lfs_fromle32(a);
+}
+
+// Calculate CRC-32 with polynomial = 0x04c11db7
+void lfs_crc(uint32_t *crc, const void *buffer, size_t size);
+
+// Allocate memory, only used if buffers are not provided to littlefs
+static inline void *lfs_malloc(size_t size)
+{
+#ifndef LFS_NO_MALLOC
+    extern void *pvPortMalloc(size_t xWantedSize);
+    return pvPortMalloc(size);
+#else
+    (void)size;
+    return NULL;
+#endif
+}
+
+// Deallocate memory, only used if buffers are not provided to littlefs
+static inline void lfs_free(void *p)
+{
+#ifndef LFS_NO_MALLOC
+    extern void vPortFree(void *pv);
+    vPortFree(p);
+#else
+    (void)p;
+#endif
+}
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif
+#endif

arch/nrf52/nrf52.ini

@@ -2,9 +2,13 @@
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
 platform = platformio/nordicnrf52@^10.5.0
 extends = arduino_base
+platform_packages =
+  ; our custom Git version until they merge our PR
+  framework-arduinoadafruitnrf52 @ https://github.com/geeksville/Adafruit_nRF52_Arduino.git
 
 build_type = debug
-build_flags = 
+build_flags =
+  -include arch/nrf52/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
@@ -12,10 +16,11 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}
+  rweather/Crypto@^0.4.0
 
 lib_ignore =
   BluetoothOTA

arch/nrf52/nrf52840.ini

@@ -7,3 +7,72 @@ lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
+
+; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
+
+; We want the initial breakpoint at setup() instead of main().  Also we want to enable semihosting at that point so instead of
+debug_init_break = tbreak setup
+; we just turn off the platformio tbreak and do it in .gdbinit (where we have more flexibility for scripting)
+; also we use a permanent breakpoint so it gets reused each time we restart the debugging session?
+; debug_init_break = tbreak main
+
+; Note: add "monitor arm semihosting_redirect tcp 4444 all" if you want the stdout from the device to go to that port number instead
+; (for use by meshtastic command line)
+;  monitor arm semihosting disable
+;  monitor debug_level 3
+;
+; IMPORTANT: fileio must be disabled before using port 5555 - openocd ver 0.12 has a bug where if enabled it never properly parses the special :tt name
+; for stdio access.
+;   monitor arm semihosting_redirect tcp 5555 stdio
+
+; Also note: it is _impossible_ to do non blocking reads on the semihost console port (an oversight when ARM specified the semihost API).
+; So we'll neve be able to general purpose bi-directional communication with the device over semihosting.
+debug_extra_cmds =
+  echo Running .gdbinit script
+  ;monitor arm semihosting enable
+  ;monitor arm semihosting_fileio enable
+  ;monitor arm semihosting_redirect disable
+  commands 1
+  ; echo Breakpoint at setup() has semihosting console, connect to it with "telnet localhost 5555"
+  ; set wantSemihost = 1
+  set useSoftDevice = 0
+  end
+
+  ; Only reprogram the board if the code has changed
+debug_load_mode = modified
+;debug_load_mode = manual
+; We default to the stlink adapter because it is very cheap and works well, though others (such as jlink) are also supported.
+;debug_tool = jlink
+debug_tool = stlink
+debug_speed = 4000
+;debug_tool = custom
+; debug_server =
+;  openocd
+;  -f
+;  /usr/local/share/openocd/scripts/interface/stlink.cfg
+;  -f
+;  /usr/local/share/openocd/scripts/target/nrf52.cfg
+; $PLATFORMIO_CORE_DIR/packages/tool-openocd/openocd/scripts/interface/cmsis-dap.cfg
+
+; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
+; programming time is about the same as the bootloader version.
+; For information on this see the meshtastic developers documentation for "Development on the NRF52"
+; We manually pass in the elf file so that pyocd can reverse engineer FreeRTOS data (running threads, etc...)
+;debug_server =
+;  pyocd
+;  gdbserver
+;  -j
+;  ${platformio.workspace_dir}/..
+;  -t
+;  nrf52840
+;  --semihosting
+;  --elf
+;  ${platformio.build_dir}/${this.__env__}/firmware.elf
+
+; If you want to debug the semihosting support you can turn on extra logging in pyocd with
+;   -L
+;   pyocd.debug.semihost.trace=debug
+
+; The following is not needed because it automatically tries do this
+;debug_server_ready_pattern = -.*GDB server started on port \d+.*
+;debug_port = localhost:3333

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
+platform = https://github.com/meshtastic/platform-native.git#6b3796d697481c8f6e3f4aa5c111bd9979f29e64
 framework = arduino
 
 build_src_filter = 
@@ -9,7 +9,7 @@ build_src_filter =
   -<nimble/> 
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
-  -<platform/rp2040>
+  -<platform/rp2xx0>
   -<mesh/wifi/>
   -<mesh/http/>
   +<mesh/raspihttp/>
@@ -24,7 +24,7 @@ lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
+  lovyan03/LovyanGFX@^1.1.16
 
 build_flags =
   ${arduino_base.build_flags}

arch/rp2xx0/rp2040.ini

@@ -0,0 +1,25 @@
+; Common settings for rp2040 Processor based targets
+[rp2040_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#v1.2.0-gcc12
+extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.0.3
+
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
+  -Isrc/platform/rp2xx0
+  -Isrc/platform/rp2xx0/hardware_rosc/include
+  -Isrc/platform/rp2xx0/pico_sleep/include
+  -D__PLAT_RP2040__
+#  -D _POSIX_THREADS
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
+
+lib_ignore =
+  BluetoothOTA
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  rweather/Crypto

arch/rp2xx0/rp2350.ini

@@ -1,14 +1,14 @@
 ; Common settings for rp2040 Processor based targets
-[rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
+[rp2350_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9e55f6db5c56b9867c69fe473f388beea4546672
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#a6ab6e1f95bc1428d667d55ea7173c0744acc03c ; 4.0.2+
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/platform/rp2040
+  -Isrc/platform/rp2xx0
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 

arch/stm32/stm32.ini

@@ -0,0 +1,37 @@
+[stm32_base]
+extends = arduino_base
+platform = ststm32
+platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#ea74156acd823b6d14739f389e6cdc648f8ee36e
+
+build_type = release
+
+;board_build.flash_offset = 0x08000000
+
+build_flags = 
+  ${arduino_base.build_flags}
+  -flto
+  -Isrc/platform/stm32wl -g
+  -DMESHTASTIC_MINIMIZE_BUILD
+  -DMESHTASTIC_EXCLUDE_GPS
+  -DDEBUG_MUTE
+;  -DVECT_TAB_OFFSET=0x08000000
+  -DconfigUSE_CMSIS_RTOS_V2=1
+;  -DSPI_MODE_0=SPI_MODE0
+  -fmerge-all-constants
+  -ffunction-sections
+  -fdata-sections
+  
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
+lib_deps =
+  ${env.lib_deps}
+  charlesbaynham/OSFS@^1.2.3
+  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
+
+lib_ignore =
+  mathertel/OneButton@~2.6.1
+  Wire

arch/stm32/stm32wl5e.ini

@@ -1,28 +0,0 @@
-[stm32wl5e_base]
-platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
-platform = ststm32
-board = generic_wl5e
-framework = arduino
-
-build_type = debug
-
-build_flags = 
-  ${arduino_base.build_flags}
-  -Isrc/platform/stm32wl -g
-  -DconfigUSE_CMSIS_RTOS_V2=1
-  -DVECT_TAB_OFFSET=0x08000000
-  
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
-
-board_upload.offset_address = 0x08000000
-upload_protocol = stlink
-
-lib_deps =
-  ${env.lib_deps}
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
-  https://github.com/littlefs-project/littlefs.git#v2.5.1
-  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
-
-lib_ignore =
-  mathertel/OneButton

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-nrf52.sh

@@ -2,8 +2,8 @@
 
 set -e
 
-VERSION=`bin/buildinfo.py long`
-SHORT_VERSION=`bin/buildinfo.py short`
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
 
 OUTDIR=release/
 
@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
@@ -23,14 +23,31 @@ basename=firmware-$1-$VERSION
 
 pio run --environment $1 # -v
 SRCELF=.pio/build/$1/firmware.elf
-DFUPKG=.pio/build/$1/firmware.zip
 cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Generating NRF52 dfu file"
+DFUPKG=.pio/build/$1/firmware.zip
 cp $DFUPKG $OUTDIR/$basename-ota.zip
 
 echo "Generating NRF52 uf2 file"
 SRCHEX=.pio/build/$1/firmware.hex
-bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
 
-cp bin/device-install.* $OUTDIR
-cp bin/device-update.* $OUTDIR
-cp bin/*.uf2 $OUTDIR
+# if WM1110 target, merge hex with softdevice 7.3.0
+if (echo $1 | grep -q "wio-sdk-wm1110"); then
+	echo "Merging with softdevice"
+	bin/mergehex -m bin/s140_nrf52_7.3.0_softdevice.hex $SRCHEX -o .pio/build/$1/$basename.hex
+	SRCHEX=.pio/build/$1/$basename.hex
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp $SRCHEX $OUTDIR
+	cp bin/*.uf2 $OUTDIR
+else
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp bin/device-install.* $OUTDIR
+	cp bin/device-update.* $OUTDIR
+	cp bin/*.uf2 $OUTDIR
+fi
+
+if (echo $1 | grep -q "rak4631"); then
+	echo "Copying hex file"
+	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
+fi

bin/build-rpi2040.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32.sh

@@ -0,0 +1,29 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update -e $1
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename.bin

bin/build-userprefs-json.py

@@ -0,0 +1,48 @@
+import json
+import subprocess
+import re
+
+def get_macros_from_header(header_file):
+    # Run clang to preprocess the header file and capture the output
+    result = subprocess.run(['clang', '-E', '-dM', header_file], capture_output=True, text=True)
+    if result.returncode != 0:
+        raise RuntimeError(f"Clang preprocessing failed: {result.stderr}")
+
+    # Extract macros from the output
+    macros = {}
+    macro_pattern = re.compile(r'#define\s+(\w+)\s+(.*)')
+    for line in result.stdout.splitlines():
+        match = macro_pattern.match(line) 
+        if match and 'USERPREFS_' in line and '_USERPREFS_' not in line:
+            macros[match.group(1)] = match.group(2)
+
+    return macros
+
+def write_macros_to_json(macros, output_file):
+    with open(output_file, 'w') as f:
+        json.dump(macros, f, indent=4)
+
+def main():
+    header_file = 'userPrefs.h'
+    output_file = 'userPrefs.json'
+    # Uncomment all macros in the header file
+    with open(header_file, 'r') as file:
+        lines = file.readlines()
+
+    uncommented_lines = []
+    for line in lines:
+        stripped_line = line.strip().replace('/*', '').replace('*/', '')
+        if stripped_line.startswith('//') and 'USERPREFS_' in stripped_line:
+            # Replace "//"
+            stripped_line = stripped_line.replace('//', '')
+        uncommented_lines.append(stripped_line + '\n')
+
+    with open(header_file, 'w') as file:
+        for line in uncommented_lines:
+                file.write(line)
+    macros = get_macros_from_header(header_file)
+    write_macros_to_json(macros, output_file)
+    print(f"Macros have been written to {output_file}")
+
+if __name__ == "__main__":
+    main()

bin/config-dist.yaml

@@ -9,6 +9,7 @@ Lora:
 #  IRQ: 16
 #  Busy: 20
 #  Reset: 18
+#  SX126X_ANT_SW: 6
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -54,6 +55,8 @@ Lora:
 
 #  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
 
+#  spiSpeed: 2000000
+
 ### Set gpio chip to use in /dev/. Defaults to 0.
 ### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
 #  gpiochip: 4
@@ -111,6 +114,9 @@ Display:
 #  Height: 320
 #  Rotate: true
 
+### You can also specify the spi device for the display to use
+# spidev: spidev0.0
+
 Touchscreen:
 ### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
 
@@ -126,15 +132,21 @@ Touchscreen:
 #  CS: 7
 #  IRQ: 17
 
-### Configure device for direct keyboard input
+### You can also specify the spi device for the touchscreen to use
+# spidev: spidev0.0
+
 
 Input:
+### Configure device for direct keyboard input
+
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
 ###
 
 Logging:
   LogLevel: info # debug, info, warn, error
+#  TraceFile: /var/log/meshtasticd.json
+#  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
 #  Port: 443 # Port for Webserver & Webservices
@@ -142,3 +154,4 @@ Webserver:
 
 General:
   MaxNodes: 200
+  MaxMessageQueue: 100

bin/generate_ci_matrix.py

@@ -6,6 +6,7 @@ import configparser
 import json
 import os
 import sys
+import random
 
 rootdir = "variants/"
 
@@ -39,5 +40,7 @@ for subdir, dirs, files in os.walk(rootdir):
                             "check" in options
                         ):
                             outlist.append(section)
-
-print(json.dumps(outlist))
+if ("quick" in options) & (len(outlist) > 3):
+    print(json.dumps(random.sample(outlist, 3)))
+else:
+    print(json.dumps(outlist))

bin/platformio-custom.py

@@ -1,3 +1,4 @@
+#!/usr/bin/env python3
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
@@ -78,6 +79,11 @@ if platform.name == "espressif32":
         # For newer ESP32 targets, using newlib nano works better.
         env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
 
+if platform.name == "nordicnrf52":
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
+                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                                        "Generating UF2 file"))
+
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"

bin/readprops.py

@@ -1,9 +1,5 @@
-
-
-import subprocess
 import configparser
-import traceback
-import sys
+import subprocess
 
 
 def readProps(prefsLoc):
@@ -11,27 +7,36 @@ def readProps(prefsLoc):
 
     config = configparser.RawConfigParser()
     config.read(prefsLoc)
-    version = dict(config.items('VERSION'))
-    verObj = dict(short = "{}.{}.{}".format(version["major"], version["minor"], version["build"]),
-        long = "unset")
+    version = dict(config.items("VERSION"))
+    verObj = dict(
+        short="{}.{}.{}".format(version["major"], version["minor"], version["build"]),
+        long="unset",
+    )
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
-        sha = subprocess.check_output(
-            ['git', 'rev-parse', '--short', 'HEAD']).decode("utf-8").strip()
-        isDirty = subprocess.check_output(
-            ['git', 'diff', 'HEAD']).decode("utf-8").strip()
+        sha = (
+            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
+            .decode("utf-8")
+            .strip()
+        )
+        isDirty = (
+            subprocess.check_output(["git", "diff", "HEAD"]).decode("utf-8").strip()
+        )
         suffix = sha
         # if isDirty:
         #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
         #     suffix = sha + "-d"
-        verObj['long'] = "{}.{}.{}.{}".format(
-            version["major"], version["minor"], version["build"], suffix)
+        verObj["long"] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix
+        )
     except:
         # print("Unexpected error:", sys.exc_info()[0])
         # traceback.print_exc()
-        verObj['long'] = verObj['short']
+        verObj["long"] = verObj["short"]
 
     # print("firmware version " + verStr)
     return verObj
+
+
 # print("path is" + ','.join(sys.path))

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,10 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.9 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.8"
+echo "prebuilt binaries for your computer into nanopb-0.4.9"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto
+../nanopb-0.4.9/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

bin/setup-python-for-esp-debug.sh

@@ -0,0 +1,12 @@
+# shellcheck shell=bash
+# (this minor script is actually shell agnostic, and is intended to be sourced rather than run in a subshell)
+
+# This is a little script you can source if you want to make ESP debugging work on a modern (24.04) ubuntu machine
+# It assumes you have built and installed python 2.7 from source with:
+# ./configure --enable-optimizations --enable-shared --enable-unicode=ucs4
+# sudo make clean
+# make
+# sudo make altinstall
+
+export LD_LIBRARY_PATH=$HOME/packages/python-2.7.18/
+export PYTHON_HOME=/usr/local/lib/python2.7/

bin/uf2conv.py

@@ -1,39 +1,38 @@
 #!/usr/bin/env python3
-import sys
-import struct
-import subprocess
-import re
+import argparse
 import os
 import os.path
-import argparse
+import re
+import struct
+import subprocess
+import sys
 
-
-UF2_MAGIC_START0 = 0x0A324655 # "UF2\n"
-UF2_MAGIC_START1 = 0x9E5D5157 # Randomly selected
-UF2_MAGIC_END    = 0x0AB16F30 # Ditto
+UF2_MAGIC_START0 = 0x0A324655  # "UF2\n"
+UF2_MAGIC_START1 = 0x9E5D5157  # Randomly selected
+UF2_MAGIC_END = 0x0AB16F30  # Ditto
 
 families = {
-    'SAMD21': 0x68ed2b88,
-    'SAML21': 0x1851780a,
-    'SAMD51': 0x55114460,
-    'NRF52': 0x1b57745f,
-    'STM32F0': 0x647824b6,
-    'STM32F1': 0x5ee21072,
-    'STM32F2': 0x5d1a0a2e,
-    'STM32F3': 0x6b846188,
-    'STM32F4': 0x57755a57,
-    'STM32F7': 0x53b80f00,
-    'STM32G0': 0x300f5633,
-    'STM32G4': 0x4c71240a,
-    'STM32H7': 0x6db66082,
-    'STM32L0': 0x202e3a91,
-    'STM32L1': 0x1e1f432d,
-    'STM32L4': 0x00ff6919,
-    'STM32L5': 0x04240bdf,
-    'STM32WB': 0x70d16653,
-    'STM32WL': 0x21460ff0,
-    'ATMEGA32': 0x16573617,
-    'MIMXRT10XX': 0x4FB2D5BD
+    "SAMD21": 0x68ED2B88,
+    "SAML21": 0x1851780A,
+    "SAMD51": 0x55114460,
+    "NRF52": 0x1B57745F,
+    "STM32F0": 0x647824B6,
+    "STM32F1": 0x5EE21072,
+    "STM32F2": 0x5D1A0A2E,
+    "STM32F3": 0x6B846188,
+    "STM32F4": 0x57755A57,
+    "STM32F7": 0x53B80F00,
+    "STM32G0": 0x300F5633,
+    "STM32G4": 0x4C71240A,
+    "STM32H7": 0x6DB66082,
+    "STM32L0": 0x202E3A91,
+    "STM32L1": 0x1E1F432D,
+    "STM32L4": 0x00FF6919,
+    "STM32L5": 0x04240BDF,
+    "STM32WB": 0x70D16653,
+    "STM32WL": 0x21460FF0,
+    "ATMEGA32": 0x16573617,
+    "MIMXRT10XX": 0x4FB2D5BD,
 }
 
 INFO_FILE = "/INFO_UF2.TXT"
@@ -46,15 +45,17 @@ def is_uf2(buf):
     w = struct.unpack("<II", buf[0:8])
     return w[0] == UF2_MAGIC_START0 and w[1] == UF2_MAGIC_START1
 
+
 def is_hex(buf):
     try:
         w = buf[0:30].decode("utf-8")
     except UnicodeDecodeError:
         return False
-    if w[0] == ':' and re.match(b"^[:0-9a-fA-F\r\n]+$", buf):
+    if w[0] == ":" and re.match(b"^[:0-9a-fA-F\r\n]+$", buf):
         return True
     return False
 
+
 def convert_from_uf2(buf):
     global appstartaddr
     numblocks = len(buf) // 512
@@ -62,7 +63,7 @@ def convert_from_uf2(buf):
     outp = b""
     for blockno in range(numblocks):
         ptr = blockno * 512
-        block = buf[ptr:ptr + 512]
+        block = buf[ptr : ptr + 512]
         hd = struct.unpack(b"<IIIIIIII", block[0:32])
         if hd[0] != UF2_MAGIC_START0 or hd[1] != UF2_MAGIC_START1:
             print("Skipping block at " + ptr + "; bad magic")
@@ -80,7 +81,7 @@ def convert_from_uf2(buf):
         padding = newaddr - curraddr
         if padding < 0:
             assert False, "Block out of order at " + ptr
-        if padding > 10*1024*1024:
+        if padding > 10 * 1024 * 1024:
             assert False, "More than 10M of padding needed at " + ptr
         if padding % 4 != 0:
             assert False, "Non-word padding size at " + ptr
@@ -91,6 +92,7 @@ def convert_from_uf2(buf):
         curraddr = newaddr + datalen
     return outp
 
+
 def convert_to_carray(file_content):
     outp = "const unsigned char bindata[] __attribute__((aligned(16))) = {"
     for i in range(len(file_content)):
@@ -100,6 +102,7 @@ def convert_to_carray(file_content):
     outp += "\n};\n"
     return outp
 
+
 def convert_to_uf2(file_content):
     global familyid
     datapadding = b""
@@ -109,13 +112,21 @@ def convert_to_uf2(file_content):
     outp = b""
     for blockno in range(numblocks):
         ptr = 256 * blockno
-        chunk = file_content[ptr:ptr + 256]
+        chunk = file_content[ptr : ptr + 256]
         flags = 0x0
         if familyid:
             flags |= 0x2000
-        hd = struct.pack(b"<IIIIIIII",
-            UF2_MAGIC_START0, UF2_MAGIC_START1,
-            flags, ptr + appstartaddr, 256, blockno, numblocks, familyid)
+        hd = struct.pack(
+            b"<IIIIIIII",
+            UF2_MAGIC_START0,
+            UF2_MAGIC_START1,
+            flags,
+            ptr + appstartaddr,
+            256,
+            blockno,
+            numblocks,
+            familyid,
+        )
         while len(chunk) < 256:
             chunk += b"\x00"
         block = hd + chunk + datapadding + struct.pack(b"<I", UF2_MAGIC_END)
@@ -123,6 +134,7 @@ def convert_to_uf2(file_content):
         outp += block
     return outp
 
+
 class Block:
     def __init__(self, addr):
         self.addr = addr
@@ -133,35 +145,44 @@ class Block:
         flags = 0x0
         if familyid:
             flags |= 0x2000
-        hd = struct.pack("<IIIIIIII",
-            UF2_MAGIC_START0, UF2_MAGIC_START1,
-            flags, self.addr, 256, blockno, numblocks, familyid)
+        hd = struct.pack(
+            "<IIIIIIII",
+            UF2_MAGIC_START0,
+            UF2_MAGIC_START1,
+            flags,
+            self.addr,
+            256,
+            blockno,
+            numblocks,
+            familyid,
+        )
         hd += self.bytes[0:256]
         while len(hd) < 512 - 4:
             hd += b"\x00"
         hd += struct.pack("<I", UF2_MAGIC_END)
         return hd
 
+
 def convert_from_hex_to_uf2(buf):
     global appstartaddr
     appstartaddr = None
     upper = 0
     currblock = None
     blocks = []
-    for line in buf.split('\n'):
+    for line in buf.split("\n"):
         if line[0] != ":":
             continue
         i = 1
         rec = []
         while i < len(line) - 1:
-            rec.append(int(line[i:i+2], 16))
+            rec.append(int(line[i : i + 2], 16))
             i += 2
         tp = rec[3]
         if tp == 4:
             upper = ((rec[4] << 8) | rec[5]) << 16
         elif tp == 2:
             upper = ((rec[4] << 8) | rec[5]) << 4
-            assert (upper & 0xffff) == 0
+            assert (upper & 0xFFFF) == 0
         elif tp == 1:
             break
         elif tp == 0:
@@ -170,10 +191,10 @@ def convert_from_hex_to_uf2(buf):
                 appstartaddr = addr
             i = 4
             while i < len(rec) - 1:
-                if not currblock or currblock.addr & ~0xff != addr & ~0xff:
-                    currblock = Block(addr & ~0xff)
+                if not currblock or currblock.addr & ~0xFF != addr & ~0xFF:
+                    currblock = Block(addr & ~0xFF)
                     blocks.append(currblock)
-                currblock.bytes[addr & 0xff] = rec[i]
+                currblock.bytes[addr & 0xFF] = rec[i]
                 addr += 1
                 i += 1
     numblocks = len(blocks)
@@ -182,17 +203,28 @@ def convert_from_hex_to_uf2(buf):
         resfile += blocks[i].encode(i, numblocks)
     return resfile
 
+
 def to_str(b):
     return b.decode("utf-8")
 
+
 def get_drives():
     drives = []
     if sys.platform == "win32":
-        r = subprocess.check_output(["wmic", "PATH", "Win32_LogicalDisk",
-                                     "get", "DeviceID,", "VolumeName,",
-                                     "FileSystem,", "DriveType"])
-        for line in to_str(r).split('\n'):
-            words = re.split('\s+', line)
+        r = subprocess.check_output(
+            [
+                "wmic",
+                "PATH",
+                "Win32_LogicalDisk",
+                "get",
+                "DeviceID,",
+                "VolumeName,",
+                "FileSystem,",
+                "DriveType",
+            ]
+        )
+        for line in to_str(r).split("\n"):
+            words = re.split("\\s+", line)
             if len(words) >= 3 and words[1] == "2" and words[2] == "FAT":
                 drives.append(words[0])
     else:
@@ -206,7 +238,6 @@ def get_drives():
         for d in os.listdir(rootpath):
             drives.append(os.path.join(rootpath, d))
 
-
     def has_info(d):
         try:
             return os.path.isfile(d + INFO_FILE)
@@ -217,7 +248,7 @@ def get_drives():
 
 
 def board_id(path):
-    with open(path + INFO_FILE, mode='r') as file:
+    with open(path + INFO_FILE, mode="r") as file:
         file_content = file.read()
     return re.search("Board-ID: ([^\r\n]*)", file_content).group(1)
 
@@ -235,30 +266,61 @@ def write_file(name, buf):
 
 def main():
     global appstartaddr, familyid
+
     def error(msg):
         print(msg)
         sys.exit(1)
-    parser = argparse.ArgumentParser(description='Convert to UF2 or flash directly.')
-    parser.add_argument('input', metavar='INPUT', type=str, nargs='?',
-                        help='input file (HEX, BIN or UF2)')
-    parser.add_argument('-b' , '--base', dest='base', type=str,
-                        default="0x2000",
-                        help='set base address of application for BIN format (default: 0x2000)')
-    parser.add_argument('-o' , '--output', metavar="FILE", dest='output', type=str,
-                        help='write output to named file; defaults to "flash.uf2" or "flash.bin" where sensible')
-    parser.add_argument('-d' , '--device', dest="device_path",
-                        help='select a device path to flash')
-    parser.add_argument('-l' , '--list', action='store_true',
-                        help='list connected devices')
-    parser.add_argument('-c' , '--convert', action='store_true',
-                        help='do not flash, just convert')
-    parser.add_argument('-D' , '--deploy', action='store_true',
-                        help='just flash, do not convert')
-    parser.add_argument('-f' , '--family', dest='family', type=str,
-                        default="0x0",
-                        help='specify familyID - number or name (default: 0x0)')
-    parser.add_argument('-C' , '--carray', action='store_true',
-                        help='convert binary file to a C array, not UF2')
+
+    parser = argparse.ArgumentParser(description="Convert to UF2 or flash directly.")
+    parser.add_argument(
+        "input",
+        metavar="INPUT",
+        type=str,
+        nargs="?",
+        help="input file (HEX, BIN or UF2)",
+    )
+    parser.add_argument(
+        "-b",
+        "--base",
+        dest="base",
+        type=str,
+        default="0x2000",
+        help="set base address of application for BIN format (default: 0x2000)",
+    )
+    parser.add_argument(
+        "-o",
+        "--output",
+        metavar="FILE",
+        dest="output",
+        type=str,
+        help='write output to named file; defaults to "flash.uf2" or "flash.bin" where sensible',
+    )
+    parser.add_argument(
+        "-d", "--device", dest="device_path", help="select a device path to flash"
+    )
+    parser.add_argument(
+        "-l", "--list", action="store_true", help="list connected devices"
+    )
+    parser.add_argument(
+        "-c", "--convert", action="store_true", help="do not flash, just convert"
+    )
+    parser.add_argument(
+        "-D", "--deploy", action="store_true", help="just flash, do not convert"
+    )
+    parser.add_argument(
+        "-f",
+        "--family",
+        dest="family",
+        type=str,
+        default="0x0",
+        help="specify familyID - number or name (default: 0x0)",
+    )
+    parser.add_argument(
+        "-C",
+        "--carray",
+        action="store_true",
+        help="convert binary file to a C array, not UF2",
+    )
     args = parser.parse_args()
     appstartaddr = int(args.base, 0)
 
@@ -268,14 +330,17 @@ def main():
         try:
             familyid = int(args.family, 0)
         except ValueError:
-            error("Family ID needs to be a number or one of: " + ", ".join(families.keys()))
+            error(
+                "Family ID needs to be a number or one of: "
+                + ", ".join(families.keys())
+            )
 
     if args.list:
         list_drives()
     else:
         if not args.input:
             error("Need input file")
-        with open(args.input, mode='rb') as f:
+        with open(args.input, mode="rb") as f:
             inpbuf = f.read()
         from_uf2 = is_uf2(inpbuf)
         ext = "uf2"
@@ -291,8 +356,10 @@ def main():
             ext = "h"
         else:
             outbuf = convert_to_uf2(inpbuf)
-        print("Converting to %s, output size: %d, start address: 0x%x" %
-              (ext, len(outbuf), appstartaddr))
+        print(
+            "Converting to %s, output size: %d, start address: 0x%x"
+            % (ext, len(outbuf), appstartaddr)
+        )
         if args.convert or ext != "uf2":
             drives = []
             if args.output == None:

bin/wio_tracker_bootloader_update.bin

@@ -0,0 +1,30 @@
+# tips from mark on how to replace the (broken) bootloader on the red wio_tracker_1110 boards.
+
+~/.platformio/penv/bin/adafruit-nrfutil --verbose dfu serial --package wio_tracker_1110_bootloader-0.9.1_s140_7.3.0.zip -p /dev/ttyACM1 -b 115200 --singlebank --touch 1200
+
+exit
+
+# Output should look like
+
+Upgrading target on /dev/ttyACM1 with DFU package /home/kevinh/development/meshtastic/WioWM1110/wio_tracker_1110_bootloader-0.9.1_s140_7.3.0.zip. Flow control is disabled, Single bank, Touch 1200
+Touched serial port /dev/ttyACM1
+Opened serial port /dev/ttyACM1
+Starting DFU upgrade of type 3, SoftDevice size: 152728, bootloader size: 39000, application size: 0
+Sending DFU start packet
+Sending DFU init packet
+Sending firmware file
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+###############
+Activating new firmware
+
+DFU upgrade took 20.242434978485107s
+Device programmed.
+

boards/CDEBYTE_EoRa-S3.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "CDEBYTE_EoRa-S3"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/ESP32-S3-WROOM-1-N4.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "ESP32-S3-WROOM-1-N4"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "default_tool": "esp-builtin",
     "onboard_tools": ["esp-builtin"],

boards/heltec_mesh_node_t114.json

@@ -5,12 +5,16 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V1 -DNRF52840_XXAA",
+    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4404"]],
-    "usb_product": "LORA_RELAY",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "HT-n5262",
     "mcu": "nrf52840",
-    "variant": "lora_relay_v1",
+    "variant": "heltec_mesh_node_t114",
     "variants_dir": "variants",
     "bsp": {
       "name": "adafruit"
@@ -33,15 +37,17 @@
     "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
-  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "name": "Heltec nrf (Adafruit BSP)",
   "upload": {
     "maximum_ram_size": 248832,
     "maximum_size": 815104,
-    "require_upload_port": true,
     "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
   },
-  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
-  "vendor": "BigCorvus"
+  "url": "FIXME",
+  "vendor": "Heltec"
 }

boards/heltec_vision_master_e213.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "heltec_vision_master_e213"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Vision Master E213",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/vision-master-e213/",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_e290.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "heltec_vision_master_e290"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Vision Master E290",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/vision-master-e290/",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_t190.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "heltec_vision_master_t190"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Vision Master t190",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/vision-master-t190/",
+  "vendor": "Heltec"
+}

boards/lora-relay-v2.json

@@ -1,47 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V2 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4406"]],
-    "usb_product": "LORA_RELAY",
-    "mcu": "nrf52840",
-    "variant": "lora_relay_v2",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
-  },
-  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
-  "vendor": "BigCorvus"
-}

boards/lora_isp4520.json

@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52832_s132_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52832_XXAA -DNRF52",
-    "f_cpu": "64000000L",
-    "mcu": "nrf52832",
-    "variant": "lora_isp4520",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS132",
-      "sd_name": "s132",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B7"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "lora ISP4520",
-  "upload": {
-    "maximum_ram_size": 65536,
-    "maximum_size": 524288,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
-  },
-  "url": "",
-  "vendor": "PsiSoft"
-}

boards/me25ls01-4y10td.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DME25LS01_4Y10TD -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "ME25LS01-BOOT",
+    "mcu": "nrf52840",
+    "variant": "MINEWSEMI_ME25LS01",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Minesemi ME25LS01",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/lr1110-nrf52840-me25LS01l",
+  "vendor": "Minesemi"
+}

boards/ms24sf1.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DMS24SF1 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "MS24SF1-BOOT",
+    "mcu": "nrf52840",
+    "variant": "MINEWSEMI_MS24SF1_SX1262",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "MINEWSEMI_MS24SF1_SX1262",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/nrf52840-sx1262-ms24sf1",
+  "vendor": "Minesemi"
+}

boards/nordic_pca10059.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "extra_flags": "-DNORDIC_PCA10059 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nrf52840_dk_modified.json

@@ -1,47 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s113_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4404"]],
-    "usb_product": "nrf52840dk",
-    "mcu": "nrf52840",
-    "variant": "pca10056-rc-clock",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
-  },
-  "url": "https://meshtastic.org/",
-  "vendor": "Nordic Semi"
-}

boards/ppr.json

@@ -1,47 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_PPR -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4403"]],
-    "usb_product": "PPR",
-    "mcu": "nrf52840",
-    "variant": "ppr",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Meshtastic PPR (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
-  },
-  "url": "https://meshtastic.org/",
-  "vendor": "Othernet"
-}

boards/ppr1.json

@@ -1,47 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52833_s113_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52833_PPR -DNRF52833_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0x4406"]],
-    "usb_product": "PPR",
-    "mcu": "nrf52833",
-    "variant": "ppr",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS113",
-      "sd_name": "s113",
-      "sd_version": "7.2.0",
-      "sd_fwid": "0x00b6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52833_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52833.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Meshtastic PPR1 (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "jlink",
-    "protocols": ["jlink", "nrfjprog", "stlink"]
-  },
-  "url": "https://meshtastic.org/",
-  "vendor": "Othernet"
-}

boards/seeed-sensecap-indicator.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x1A86", "0x7523"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3r8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Studio SenseCAP Indicator",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",
+  "vendor": "Seeed Studio"
+}

boards/seeed-xiao-s3.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x2886", "0x0059"]],
+    "mcu": "esp32s3",
+    "variant": "seeed-xiao-s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "seeed-xiao-s3",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 8388608,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html",
+  "vendor": "Seeed Studio"
+}

boards/tlora-t3s3-v1.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "tlora-t3s3-v1"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/tracker-t1000-e.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "T1000-E-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_T1000-E",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed T1000-E",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/SenseCAP-Card-Tracker-T1000-E-for-Meshtastic-p-5913.html",
+  "vendor": "Seeed Studio"
+}

boards/wio-sdk-wm1110.json

@@ -1,7 +1,7 @@
 {
   "build": {
     "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
+      "ldscript": "nrf52840_s140_v7.ld"
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
@@ -15,8 +15,8 @@
     "softdevice": {
       "sd_flags": "-DS140",
       "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
     },
     "bootloader": {
       "settings_addr": "0xFF000"
@@ -27,7 +27,7 @@
     "jlink_device": "nRF52840_xxAA",
     "svd_path": "nrf52840.svd"
   },
-  "frameworks": ["arduino"],
+  "frameworks": ["arduino", "freertos"],
   "name": "Seeed WIO WM1110",
   "upload": {
     "maximum_ram_size": 248832,

boards/wio-t1000-s.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "WIO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_WIO_WM1110",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed WIO WM1110",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/LoRaWAN-Tracker-c-1938.html",
+  "vendor": "Seeed Studio"
+}

boards/wio-tracker-wm1110.json

@@ -1,7 +1,7 @@
 {
   "build": {
     "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
+      "ldscript": "nrf52840_s140_v7.ld"
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
@@ -22,8 +22,8 @@
     "softdevice": {
       "sd_flags": "-DS140",
       "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
     },
     "bootloader": {
       "settings_addr": "0xFF000"
@@ -53,6 +53,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "https://www.seeedstudio.com/Wio-WM1110-Dev-Kit-p-5677.html",
+  "url": "https://www.seeedstudio.com/Wio-Tracker-1110-Dev-Board-p-5799.html",
   "vendor": "Seeed Studio"
 }

boards/wiscore_rak3172.json

@@ -1,5 +1,8 @@
 {
   "build": {
+    "arduino": {
+      "variant_h": "variant_RAK3172_MODULE.h"
+    },
     "core": "stm32",
     "cpu": "cortex-m4",
     "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",

boards/wiscore_rak4631.json

@@ -35,7 +35,7 @@
     "svd_path": "nrf52840.svd",
     "openocd_target": "nrf52840-mdk-rs"
   },
-  "frameworks": ["arduino"],
+  "frameworks": ["arduino", "freertos"],
   "name": "WisCore RAK4631 Board",
   "upload": {
     "maximum_ram_size": 248832,

extra_scripts/disable_adafruit_usb.py

@@ -5,16 +5,24 @@ Import("env")
 
 # NOTE: This is not currently used, but can serve as an example on how to write extra_scripts
 
-print("Current CLI targets", COMMAND_LINE_TARGETS)
-print("Current Build targets", BUILD_TARGETS)
-print("CPP defs", env.get("CPPDEFINES"))
+# print("Current CLI targets", COMMAND_LINE_TARGETS)
+# print("Current Build targets", BUILD_TARGETS)
+# print("CPP defs", env.get("CPPDEFINES"))
+# print(env.Dump())
 
 # Adafruit.py in the platformio build tree is a bit naive and always enables their USB stack for building.  We don't want this.
 # So come in after that python script has run and disable it.  This hack avoids us having to fork that big project and send in a PR
 # which might not be accepted. -@geeksville
 
-env["CPPDEFINES"].remove("USBCON")
-env["CPPDEFINES"].remove("USE_TINYUSB")
+lib_builders = env.get("__PIO_LIB_BUILDERS", None)
+if lib_builders is not None:
+    print("Disabling Adafruit USB stack")
+    for k in lib_builders:
+        if k.name == "Adafruit TinyUSB Library":
+            libenv = k.env
+            # print(f"{k.name }: { libenv.Dump() } ")
+            # libenv["CPPDEFINES"].remove("USBCON")
+            libenv["CPPDEFINES"].remove("USE_TINYUSB")
 
 # Custom actions when building program/firmware
 # env.AddPreAction("buildprog", callback...)

images/face-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M9 11.75c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zm6 0c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zM12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37C11.07 8.33 14.05 10 17.42 10c.78 0 1.53-.09 2.25-.26.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8z"/><path d="M0 0h24v24H0z" fill="none"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M9 11.75a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5m6 0a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2m0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37a9.97 9.97 0 0 0 10.41 3.97c.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8"/><path fill="none" d="M0 0h24v24H0z"/></svg>