replace deprecated commands (write_flash)

.github/actions/setup-base/action.yml

@@ -23,7 +23,7 @@ runs:
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
 
     - name: Setup Python
-      uses: actions/setup-python@v6
+      uses: actions/setup-python@v5
       with:
         python-version: 3.x
         cache: pip

.github/workflows/main_matrix.yml

@@ -43,7 +43,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
+      - uses: actions/setup-python@v5
         with:
           python-version: 3.x
           cache: pip
@@ -370,7 +370,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -439,7 +439,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -494,7 +494,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/package_pio_deps.yml

@@ -31,7 +31,7 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/pr_enforce_labels.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Check for PR labels
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);

.github/workflows/pr_tests.yml

@@ -177,7 +177,7 @@ jobs:
 
       - name: Comment test results on PR
         if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           script: |
             const fs = require('fs');

.github/workflows/release_channels.yml

@@ -63,7 +63,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.0.0
+        uses: actions/stale@v9.1.0
         with:
           days-before-stale: 45
           exempt-issue-labels: pinned,3.0

.github/workflows/tests.yml

@@ -47,7 +47,7 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v5
+        uses: actions/setup-node@v4
         with:
           node-version: 22
 

.github/workflows/trunk_format_pr.yml

@@ -39,7 +39,7 @@ jobs:
           git push
 
       - name: Comment on PR
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.trunk/trunk.yaml

@@ -8,13 +8,13 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.469
-    - renovate@41.94.0
+    - checkov@3.2.467
+    - renovate@41.91.3
     - prettier@3.6.2
     - trufflehog@3.90.5
     - yamllint@1.37.1
     - bandit@1.8.6
-    - trivy@0.66.0
+    - trivy@0.65.0
     - taplo@0.10.0
     - ruff@0.12.11
     - isort@6.0.1
@@ -23,7 +23,7 @@ lint:
     - svgo@4.0.0
     - actionlint@1.7.7
     - flake8@7.3.0
-    - hadolint@2.13.1
+    - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.11.0
     - black@25.1.0

arch/portduino/portduino.ini

@@ -31,8 +31,6 @@ lib_deps =
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
-  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 build_flags =
   ${arduino_base.build_flags}

bin/device-install.bat

@@ -7,7 +7,6 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
-SET "MUIDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
@@ -18,8 +17,7 @@ SET "BPS_RESET=0"
 SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
 SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
 
 GOTO getopts
@@ -121,10 +119,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -164,15 +163,6 @@ FOR %%a IN (%BIGDB_8MB%) DO (
 )
 :end_loop_bigdb_8mb
 
-FOR %%a IN (%MUIDB_8MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %MUIDB_8MB%.
-        SET "MUIDB8=1"
-        GOTO end_loop_muidb_8mb
-    )
-)
-:end_loop_muidb_8mb
-
 FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %BIGDB_16MB%.
@@ -183,7 +173,6 @@ FOR %%a IN (%BIGDB_16MB%) DO (
 :end_loop_bigdb_16mb
 
 IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
-IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
 IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
@@ -228,12 +217,6 @@ IF %BIGDB8% EQU 1 (
     SET "SPIFFS_OFFSET=0x670000"
 )
 
-@REM Offsets for MUIDB 8mb.
-IF %MUIDB8% EQU 1 (
-    SET "OTA_OFFSET=0x5D0000"
-    SET "SPIFFS_OFFSET=0x670000"
-)
-
 @REM Offsets for BigDB 16mb.
 IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"
@@ -250,14 +233,14 @@ IF NOT EXIST !SPIFFS_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!S
 
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash "!FILENAME!", but first erasing and writing system information..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase_flash || GOTO eof
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x00 "!FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase-flash || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash 0x00 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash BLEOTA "!OTA_FILENAME!" at OTA_OFFSET !OTA_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash SPIFFS "!SPIFFS_FILENAME!" at SPIFFS_OFFSET !SPIFFS_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -269,9 +252,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write-flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-install.sh

@@ -5,39 +5,33 @@ BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
-# Constants
-RESET_BAUD=1200
-FIRMWARE_OFFSET=0x00
-
 # Variant groups
 BIGDB_8MB=(
-    "crowpanel-esp32s3"
-    "heltec_capsule_sensor_v3"
-    "heltec-v3"
-    "heltec-vision-master-e213"
-    "heltec-vision-master-e290"
-    "heltec-vision-master-t190"
-    "heltec-wireless-paper"
-    "heltec-wireless-tracker"
-    "heltec-wsl-v3"
-    "icarus"
-    "seeed-xiao-s3"
-    "tbeam-s3-core"
-    "tracksenger"
-)
-MUIDB_8MB=(
-    "picomputer-s3"
-    "unphone"
-    "seeed-sensecap-indicator"
+	"picomputer-s3"
+	"unphone"
+	"seeed-sensecap-indicator"
+	"crowpanel-esp32s3"
+	"heltec_capsule_sensor_v3"
+	"heltec-v3"
+	"heltec-vision-master-e213"
+	"heltec-vision-master-e290"
+	"heltec-vision-master-t190"
+	"heltec-wireless-paper"
+	"heltec-wireless-tracker"
+	"heltec-wsl-v3"
+	"icarus"
+	"seeed-xiao-s3"
+	"tbeam-s3-core"
+	"tracksenger"
 )
 BIGDB_16MB=(
-    "t-deck"
-    "mesh-tab"
-    "t-energy-s3"
-    "dreamcatcher"
-    "ESP32-S3-Pico"
-    "m5stack-cores3"
-    "station-g2"
+	"t-deck"
+	"mesh-tab"
+	"t-energy-s3"
+	"dreamcatcher"
+	"ESP32-S3-Pico"
+	"m5stack-cores3"
+	"station-g2"
     "t-eth-elite"
     "tlora-pager"
     "t-watch-s3"
@@ -112,8 +106,8 @@ while [ $# -gt 0 ]; do
         shift
         ;;
     --1200bps-reset)
-        BPS_RESET=true
-        ;;
+		    BPS_RESET=true
+		    ;;
     --) # Stop parsing options
         shift
         break
@@ -127,7 +121,7 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
 	exit 0
 fi
 
@@ -164,13 +158,6 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         fi
     done
 
-    for variant in "${MUIDB_8MB[@]}"; do
-        if [ -z "${FILENAME##*"$variant"*}" ]; then
-            OFFSET=0x670000
-            OTA_OFFSET=0x5D0000
-        fi
-    done
-
     # littlefs* offset for BigDB 16mb and OTA OFFSET.
     for variant in "${BIGDB_16MB[@]}"; do
         if [ -z "${FILENAME##*"$variant"*}" ]; then
@@ -215,11 +202,11 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
     $ESPTOOL_CMD erase-flash
-    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD write-flash 0x00 "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write-flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write-flash $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

bin/device-update.bat

@@ -6,8 +6,6 @@ SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
-SET "RESET_BAUD=1200"
-SET "UPDATE_OFFSET=0x10000"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "CHANGE_MODE=0"
@@ -87,13 +85,14 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=""!PYTHON!"" -m esptool"
+    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -106,11 +105,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-CALL :LOG_MESSAGE DEBUG "esptool exit code: %ERRORLEVEL%"
-IF %ERRORLEVEL% EQU 9009 (
-    @REM 9009 = command not found on Windows
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -128,13 +127,13 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %CHANGE_MODE% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !RESET_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
 @REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET !UPDATE_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !UPDATE_OFFSET! "!FILENAME!" || GOTO eof
+CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash 0x10000 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 

bin/device-update.sh

@@ -3,11 +3,6 @@
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
 
-# Constants
-FLASH_BAUD=115200
-RESET_BAUD=1200
-UPDATE_OFFSET=0x10000
-
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
     ESPTOOL_CMD="$PYTHON -m esptool"
@@ -69,7 +64,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
     exit 0
 fi
 
@@ -80,7 +75,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write-flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,9 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.9" date="2025-09-03">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.9</url>
-    </release>
     <release version="2.7.8" date="2025-08-30">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
     </release>

boards/seeed-sensecap-indicator.json

@@ -2,7 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "partition-table-8MB.csv",
+      "partitions": "default_8MB.csv",
       "memory_type": "qio_opi"
     },
     "core": "esp32",

boards/unphone.json

@@ -3,7 +3,7 @@
     "arduino": {
       "ldscript": "esp32s3_out.ld",
       "memory_type": "qio_opi",
-      "partitions": "partition-table-8MB.csv"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.9.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.8.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -44,7 +44,4 @@ meshtasticd (2.7.9.0) UNRELEASED; urgency=medium
   [  ]
   * GitHub Actions Automatic version bump
 
-  [  ]
-  * GitHub Actions Automatic version bump
-
- --  <github-actions[bot]@users.noreply.github.com>  Wed, 03 Sep 2025 23:39:17 +0000
+ --  <github-actions[bot]@users.noreply.github.com>  Sat, 30 Aug 2025 00:26:04 +0000

partition-table-8MB.csv

@@ -1,7 +0,0 @@
-# This is a layout for 8MB of flash for MUI devices
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x5C0000,
-flashApp, app,  ota_1,   0x5D0000,0x0A0000,
-spiffs,   data, spiffs,  0x670000,0x180000

platformio.ini

@@ -118,7 +118,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/3677476c8a823ee85056b5fb1d146a3e193f8276.zip
+	https://github.com/meshtastic/device-ui/archive/8019704395b7539600d581330499208edcd80804.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -157,8 +157,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
-	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
+	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
+	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
@@ -177,8 +177,6 @@ lib_deps =
 	adafruit/Adafruit PCT2075@1.0.5
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
-	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.2
 
 ; (not included in native / portduino)
 [environmental_extra]

src/Power.cpp

@@ -833,25 +833,16 @@ void Power::readPowerStatus()
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        // Use stack-allocated buffer to avoid heap allocations in monitoring code
-        char threadlist[256] = "Threads running:";
-        int threadlistLen = strlen(threadlist);
+        std::string threadlist = "Threads running:";
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                // Use snprintf to safely append to stack buffer without heap allocation
-                int remaining = sizeof(threadlist) - threadlistLen - 1;
-                if (remaining > 0) {
-                    int written = snprintf(threadlist + threadlistLen, remaining, " %s", thread->ThreadName.c_str());
-                    if (written > 0 && written < remaining) {
-                        threadlistLen += written;
-                    }
-                }
+                threadlist += vformat(" %s", thread->ThreadName.c_str());
                 running++;
             }
         }
-        LOG_DEBUG(threadlist);
+        LOG_DEBUG(threadlist.c_str());
         LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
                   memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
@@ -865,19 +856,15 @@ void Power::readPowerStatus()
         sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
         auto newHeap = memGet.getFreeHeap();
-        // Use stack-allocated buffers to avoid heap allocations in monitoring code
-        char heapTopic[128];
-        snprintf(heapTopic, sizeof(heapTopic), "%s/2/heap/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char heapString[16];
-        snprintf(heapString, sizeof(heapString), "%u", newHeap);
-        mqtt->pubSub.publish(heapTopic, heapString, false);
-
+        std::string heapTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+        std::string heapString = std::to_string(newHeap);
+        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
         auto wifiRSSI = WiFi.RSSI();
-        char wifiTopic[128];
-        snprintf(wifiTopic, sizeof(wifiTopic), "%s/2/wifi/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
-        char wifiString[16];
-        snprintf(wifiString, sizeof(wifiString), "%d", wifiRSSI);
-        mqtt->pubSub.publish(wifiTopic, wifiString, false);
+        std::string wifiTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+        std::string wifiString = std::to_string(wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
     }
 #endif
 

src/detect/ScanI2C.h

@@ -80,7 +80,6 @@ class ScanI2C
         LTR553ALS,
         BHI260AP,
         BMM150,
-        TSL2561,
         DRV2605
     } DeviceType;
 

src/detect/ScanI2CTwoWire.cpp

@@ -461,17 +461,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-            case TSL25911_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
-                if (registerValue == 0x50) {
-                    type = TSL2591;
-                    logFoundDevice("TSL25911", (uint8_t)addr.address);
-                } else {
-                    type = TSL2561;
-                    logFoundDevice("TSL2561", (uint8_t)addr.address);
-                }
-                break;
-
+                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -1,4 +1,5 @@
 #include <cstring> // Include for strstr
+#include <string>
 #include <vector>
 
 #include "configuration.h"
@@ -1369,42 +1370,34 @@ GnssModel_t GPS::probe(int serialSpeed)
 
 GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap)
 {
-    char response[256] = {0}; // Fixed buffer instead of String
-    uint16_t responseLen = 0;
+    String response = "";
     unsigned long start = millis();
     while (millis() - start < timeout) {
         if (_serial_gps->available()) {
-            char c = _serial_gps->read();
+            response += (char)_serial_gps->read();
 
-            // Add char to buffer if there's space
-            if (responseLen < sizeof(response) - 1) {
-                response[responseLen++] = c;
-                response[responseLen] = '\0';
-            }
-
-            if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
+            if (response.endsWith(",") || response.endsWith("\r\n")) {
 #ifdef GPS_DEBUG
-                LOG_DEBUG(response);
+                LOG_DEBUG(response.c_str());
 #endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
-                    if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
+                    if (strstr(response.c_str(), chipInfo.detectionString.c_str()) != nullptr) {
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
                         return chipInfo.driver;
                     }
                 }
             }
-            if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
-                // Reset the response buffer for the next potential message
-                responseLen = 0;
-                response[0] = '\0';
+            if (response.endsWith("\r\n")) {
+                response.trim();
+                response = ""; // Reset the response string for the next potential message
             }
         }
     }
 #ifdef GPS_DEBUG
-    LOG_DEBUG(response);
+    LOG_DEBUG(response.c_str());
 #endif
-    return GNSS_MODEL_UNKNOWN; // Return unknown on timeout
+    return GNSS_MODEL_UNKNOWN; // Return empty string on timeout
 }
 
 GPS *GPS::createGps()
@@ -1539,9 +1532,10 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         t.tm_year = d.year() - 1900;
         t.tm_isdst = false;
         if (t.tm_mon > -1) {
+            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
+                      t.tm_sec, ti.age());
             if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultSuccess) {
-                LOG_DEBUG("NMEA GPS time set %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour,
-                          t.tm_min, t.tm_sec, ti.age());
+                LOG_DEBUG("Time set.");
                 return true;
             } else {
                 return false;

src/graphics/TFTDisplay.cpp

@@ -1128,15 +1128,6 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
 #endif
 }
 
-TFTDisplay::~TFTDisplay()
-{
-    // Clean up allocated line pixel buffer to prevent memory leak
-    if (linePixelBuffer != nullptr) {
-        free(linePixelBuffer);
-        linePixelBuffer = nullptr;
-    }
-}
-
 // Write the buffer to the display memory
 void TFTDisplay::display(bool fromBlank)
 {

src/graphics/TFTDisplay.h

@@ -20,9 +20,6 @@ class TFTDisplay : public OLEDDisplay
     */
     TFTDisplay(uint8_t, int, int, OLEDDISPLAY_GEOMETRY, HW_I2C);
 
-    // Destructor to clean up allocated memory
-    ~TFTDisplay();
-
     // Write the buffer to the display memory
     virtual void display() override { display(false); };
     virtual void display(bool fromBlank);

src/input/RotaryEncoderImpl.cpp

@@ -40,7 +40,10 @@ bool RotaryEncoderImpl::init()
 
 int32_t RotaryEncoderImpl::runOnce()
 {
-    InputEvent e{originName, INPUT_BROKER_NONE, 0, 0, 0};
+    InputEvent e;
+    e.inputEvent = INPUT_BROKER_NONE;
+    e.source = this->originName;
+
     static uint32_t lastPressed = millis();
     if (rotary->readButton() == RotaryEncoder::ButtonState::BUTTON_PRESSED) {
         if (lastPressed + 200 < millis()) {
@@ -67,7 +70,7 @@ int32_t RotaryEncoderImpl::runOnce()
         this->notifyObservers(&e);
     }
 
-    return 10;
+    return 20;
 }
 
 #endif

src/main.cpp

@@ -741,7 +741,6 @@ void setup()
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::RAK12035, meshtastic_TelemetrySensorType_RAK12035);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::PCT2075, meshtastic_TelemetrySensorType_PCT2075);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SCD4X, meshtastic_TelemetrySensorType_SCD4X);
-    scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::TSL2561, meshtastic_TelemetrySensorType_TSL2561);
 
     i2cScanner.reset();
 #endif

src/mesh/NextHopRouter.cpp

@@ -34,11 +34,8 @@ bool NextHopRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
     bool weWereNextHop = false;
     if (wasSeenRecently(p, true, &wasFallback, &weWereNextHop)) { // Note: this will also add a recent packet record
         printPacket("Ignore dupe incoming msg", p);
-
-        if (p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA) {
-            rxDupe++;
-            stopRetransmission(p->from, p->id);
-        }
+        rxDupe++;
+        stopRetransmission(p->from, p->id);
 
         // If it was a fallback to flooding, try to relay again
         if (wasFallback) {
@@ -74,11 +71,10 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
         if (p->from != 0) {
             meshtastic_NodeInfoLite *origTx = nodeDB->getMeshNode(p->from);
             if (origTx) {
-                // Either relayer of ACK was also a relayer of the packet, or we were the *only* relayer and the ACK came directly
-                // from the destination
+                // Either relayer of ACK was also a relayer of the packet, or we were the relayer and the ACK came directly from
+                // the destination
                 if (wasRelayer(p->relay_node, p->decoded.request_id, p->to) ||
-                    (p->hop_start != 0 && p->hop_start == p->hop_limit &&
-                     wasSoleRelayer(ourRelayID, p->decoded.request_id, p->to))) {
+                    (wasRelayer(ourRelayID, p->decoded.request_id, p->to) && p->hop_start != 0 && p->hop_start == p->hop_limit)) {
                     if (origTx->next_hop != p->relay_node) { // Not already set
                         LOG_INFO("Update next hop of 0x%x to 0x%x based on ACK/reply", p->from, p->relay_node);
                         origTx->next_hop = p->relay_node;

src/mesh/PacketHistory.cpp

@@ -294,7 +294,7 @@ void PacketHistory::insert(const PacketRecord &r)
 
 /* Check if a certain node was a relayer of a packet in the history given an ID and sender
  * @return true if node was indeed a relayer, false if not */
-bool PacketHistory::wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender, bool *wasSole)
+bool PacketHistory::wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender)
 {
     if (!initOk()) {
         LOG_ERROR("PacketHistory - wasRelayer: NOT INITIALIZED!");
@@ -322,42 +322,27 @@ bool PacketHistory::wasRelayer(const uint8_t relayer, const uint32_t id, const N
               found->sender, found->id, found->next_hop, millis() - found->rxTimeMsec, found->relayed_by[0], found->relayed_by[1],
               found->relayed_by[2], relayer);
 #endif
-    return wasRelayer(relayer, *found, wasSole);
+    return wasRelayer(relayer, *found);
 }
 
 /* Check if a certain node was a relayer of a packet in the history given iterator
  * @return true if node was indeed a relayer, false if not */
-bool PacketHistory::wasRelayer(const uint8_t relayer, const PacketRecord &r, bool *wasSole)
+bool PacketHistory::wasRelayer(const uint8_t relayer, const PacketRecord &r)
 {
-    bool found = false;
-    bool other_present = false;
-
-    for (uint8_t i = 0; i < NUM_RELAYERS; ++i) {
+    for (uint8_t i = 0; i < NUM_RELAYERS; i++) {
         if (r.relayed_by[i] == relayer) {
-            found = true;
-        } else if (r.relayed_by[i] != 0) {
-            other_present = true;
+#if VERBOSE_PACKET_HISTORY
+            LOG_DEBUG("Packet History - was rel.PR.: s=%08x id=%08x rls=%02x %02x %02x / rl=%02x? YES", r.sender, r.id,
+                      r.relayed_by[0], r.relayed_by[1], r.relayed_by[2], relayer);
+#endif
+            return true;
         }
     }
-
-    if (wasSole) {
-        *wasSole = (found && !other_present);
-    }
-
 #if VERBOSE_PACKET_HISTORY
     LOG_DEBUG("Packet History - was rel.PR.: s=%08x id=%08x rls=%02x %02x %02x / rl=%02x? NO", r.sender, r.id, r.relayed_by[0],
               r.relayed_by[1], r.relayed_by[2], relayer);
 #endif
-
-    return found;
-}
-
-// Check if a certain node was the *only* relayer of a packet in the history given an ID and sender
-bool PacketHistory::wasSoleRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender)
-{
-    bool wasSole = false;
-    wasRelayer(relayer, id, sender, &wasSole);
-    return wasSole;
+    return false;
 }
 
 // Remove a relayer from the list of relayers of a packet in the history given an ID and sender

src/mesh/PacketHistory.h

@@ -34,9 +34,8 @@ class PacketHistory
     void insert(const PacketRecord &r); // Insert or replace a packet record in the history
 
     /* Check if a certain node was a relayer of a packet in the history given iterator
-     * If wasSole is not nullptr, it will be set to true if the relayer was the only relayer of that packet
      * @return true if node was indeed a relayer, false if not */
-    bool wasRelayer(const uint8_t relayer, const PacketRecord &r, bool *wasSole = nullptr);
+    bool wasRelayer(const uint8_t relayer, const PacketRecord &r);
 
     PacketHistory(const PacketHistory &);            // non construction-copyable
     PacketHistory &operator=(const PacketHistory &); // non copyable
@@ -55,12 +54,8 @@ class PacketHistory
                          bool *weWereNextHop = nullptr);
 
     /* Check if a certain node was a relayer of a packet in the history given an ID and sender
-     * If wasSole is not nullptr, it will be set to true if the relayer was the only relayer of that packet
      * @return true if node was indeed a relayer, false if not */
-    bool wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender, bool *wasSole = nullptr);
-
-    // Check if a certain node was the *only* relayer of a packet in the history given an ID and sender
-    bool wasSoleRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);
+    bool wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);
 
     // Remove a relayer from the list of relayers of a packet in the history given an ID and sender
     void removeRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);

src/mesh/ReliableRouter.cpp

@@ -58,10 +58,7 @@ bool ReliableRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
             // marked as wantAck
             sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, old->packet->channel);
 
-            // Only stop retransmissions if the rebroadcast came via LoRa
-            if (p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA) {
-                stopRetransmission(key);
-            }
+            stopRetransmission(key);
         } else {
             LOG_DEBUG("Didn't find pending packet");
         }

src/mesh/STM32WLE5JCInterface.cpp

@@ -1,13 +1,13 @@
-#include "configuration.h"
-
-#ifdef ARCH_STM32WL
 #include "STM32WLE5JCInterface.h"
+#include "configuration.h"
 #include "error.h"
 
 #ifndef STM32WLx_MAX_POWER
 #define STM32WLx_MAX_POWER 22
 #endif
 
+#ifdef ARCH_STM32WL
+
 STM32WLE5JCInterface::STM32WLE5JCInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq,
                                            RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy)
     : SX126xInterface(hal, cs, irq, rst, busy)

src/mesh/STM32WLE5JCInterface.h

@@ -1,8 +1,8 @@
 #pragma once
 
-#ifdef ARCH_STM32WL
 #include "SX126xInterface.h"
-#include "rfswitch.h"
+
+#ifdef ARCH_STM32WL
 
 /**
  * Our adapter for STM32WLE5JC radios
@@ -16,4 +16,13 @@ class STM32WLE5JCInterface : public SX126xInterface<STM32WLx>
     virtual bool init() override;
 };
 
+/* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
+ * Wio-E5 module ONLY transmits through RFO_HP
+ * Receive: PA4=1, PA5=0
+ * Transmit(high output power, SMPS mode): PA4=0, PA5=1 */
+static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA4, PA5, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[4] = {
+    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};
+
 #endif // ARCH_STM32WL

src/mesh/generated/meshtastic/config.pb.h

@@ -64,12 +64,7 @@ typedef enum _meshtastic_Config_DeviceConfig_Role {
     in areas not already covered by other routers, or to bridge around problematic terrain,
     but should not be given priority over other routers in order to avoid unnecessaraily
     consuming hops. */
-    meshtastic_Config_DeviceConfig_Role_ROUTER_LATE = 11,
-    /* Description: Treats packets from or to favorited nodes as ROUTER, and all other packets as CLIENT.
- Technical Details: Used for stronger attic/roof nodes to distribute messages more widely
-    from weaker, indoor, or less-well-positioned nodes. Recommended for users with multiple nodes
-    where one CLIENT_BASE acts as a more powerful base station, such as an attic/roof node. */
-    meshtastic_Config_DeviceConfig_Role_CLIENT_BASE = 12
+    meshtastic_Config_DeviceConfig_Role_ROUTER_LATE = 11
 } meshtastic_Config_DeviceConfig_Role;
 
 /* Defines the device's behavior for how messages are rebroadcast */
@@ -651,8 +646,8 @@ extern "C" {
 
 /* Helper constants for enums */
 #define _meshtastic_Config_DeviceConfig_Role_MIN meshtastic_Config_DeviceConfig_Role_CLIENT
-#define _meshtastic_Config_DeviceConfig_Role_MAX meshtastic_Config_DeviceConfig_Role_CLIENT_BASE
-#define _meshtastic_Config_DeviceConfig_Role_ARRAYSIZE ((meshtastic_Config_DeviceConfig_Role)(meshtastic_Config_DeviceConfig_Role_CLIENT_BASE+1))
+#define _meshtastic_Config_DeviceConfig_Role_MAX meshtastic_Config_DeviceConfig_Role_ROUTER_LATE
+#define _meshtastic_Config_DeviceConfig_Role_ARRAYSIZE ((meshtastic_Config_DeviceConfig_Role)(meshtastic_Config_DeviceConfig_Role_ROUTER_LATE+1))
 
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN meshtastic_Config_DeviceConfig_RebroadcastMode_ALL
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_MAX meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY

src/mesh/generated/meshtastic/mesh.pb.h

@@ -272,8 +272,6 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_HELTEC_MESH_SOLAR = 108,
     /* Lilygo T-Echo Lite */
     meshtastic_HardwareModel_T_ECHO_LITE = 109,
-    /* New Heltec LoRA32 with ESP32-S3 CPU */
-    meshtastic_HardwareModel_HELTEC_V4 = 110,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */

src/mesh/http/ContentHandler.cpp

@@ -342,11 +342,6 @@ void handleFsBrowseStatic(HTTPRequest *req, HTTPResponse *res)
     res->print(value->Stringify().c_str());
 
     delete value;
-
-    // Clean up the fileList to prevent memory leak
-    for (auto *val : fileList) {
-        delete val;
-    }
 }
 
 void handleFsDeleteStatic(HTTPRequest *req, HTTPResponse *res)
@@ -615,38 +610,33 @@ void handleReport(HTTPRequest *req, HTTPResponse *res)
         res->println("<pre>");
     }
 
-    // Helper lambda to create JSON array and clean up memory properly
-    auto createJSONArrayFromLog = [](uint32_t *logArray, int count) -> JSONValue * {
-        JSONArray tempArray;
-        for (int i = 0; i < count; i++) {
-            tempArray.push_back(new JSONValue((int)logArray[i]));
-        }
-        JSONValue *result = new JSONValue(tempArray);
-        // Clean up original array to prevent memory leak
-        for (auto *val : tempArray) {
-            delete val;
-        }
-        return result;
-    };
-
     // data->airtime->tx_log
+    JSONArray txLogValues;
     uint32_t *logArray;
     logArray = airTime->airtimeReport(TX_LOG);
-    JSONValue *txLogJsonValue = createJSONArrayFromLog(logArray, airTime->getPeriodsToLog());
+    for (int i = 0; i < airTime->getPeriodsToLog(); i++) {
+        txLogValues.push_back(new JSONValue((int)logArray[i]));
+    }
 
     // data->airtime->rx_log
+    JSONArray rxLogValues;
     logArray = airTime->airtimeReport(RX_LOG);
-    JSONValue *rxLogJsonValue = createJSONArrayFromLog(logArray, airTime->getPeriodsToLog());
+    for (int i = 0; i < airTime->getPeriodsToLog(); i++) {
+        rxLogValues.push_back(new JSONValue((int)logArray[i]));
+    }
 
     // data->airtime->rx_all_log
+    JSONArray rxAllLogValues;
     logArray = airTime->airtimeReport(RX_ALL_LOG);
-    JSONValue *rxAllLogJsonValue = createJSONArrayFromLog(logArray, airTime->getPeriodsToLog());
+    for (int i = 0; i < airTime->getPeriodsToLog(); i++) {
+        rxAllLogValues.push_back(new JSONValue((int)logArray[i]));
+    }
 
     // data->airtime
     JSONObject jsonObjAirtime;
-    jsonObjAirtime["tx_log"] = txLogJsonValue;
-    jsonObjAirtime["rx_log"] = rxLogJsonValue;
-    jsonObjAirtime["rx_all_log"] = rxAllLogJsonValue;
+    jsonObjAirtime["tx_log"] = new JSONValue(txLogValues);
+    jsonObjAirtime["rx_log"] = new JSONValue(rxLogValues);
+    jsonObjAirtime["rx_all_log"] = new JSONValue(rxAllLogValues);
     jsonObjAirtime["channel_utilization"] = new JSONValue(airTime->channelUtilizationPercent());
     jsonObjAirtime["utilization_tx"] = new JSONValue(airTime->utilizationTXPercent());
     jsonObjAirtime["seconds_since_boot"] = new JSONValue(int(airTime->getSecondsSinceBoot()));
@@ -775,11 +765,6 @@ void handleNodes(HTTPRequest *req, HTTPResponse *res)
     JSONValue *value = new JSONValue(jsonObjOuter);
     res->print(value->Stringify().c_str());
     delete value;
-
-    // Clean up the nodesArray to prevent memory leak
-    for (auto *val : nodesArray) {
-        delete val;
-    }
 }
 
 /*
@@ -970,10 +955,5 @@ void handleScanNetworks(HTTPRequest *req, HTTPResponse *res)
     JSONValue *value = new JSONValue(jsonObjOuter);
     res->print(value->Stringify().c_str());
     delete value;
-
-    // Clean up the networkObjs to prevent memory leak
-    for (auto *val : networkObjs) {
-        delete val;
-    }
 }
 #endif

src/modules/Modules.cpp

@@ -141,10 +141,7 @@ void setupModules()
         detectionSensorModule = new DetectionSensorModule();
 #endif
 #if !MESHTASTIC_EXCLUDE_ATAK
-        if (IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_TAK,
-                      meshtastic_Config_DeviceConfig_Role_TAK_TRACKER)) {
-            atakPluginModule = new AtakPluginModule();
-        }
+        atakPluginModule = new AtakPluginModule();
 #endif
 #if !MESHTASTIC_EXCLUDE_PKI
         keyVerificationModule = new KeyVerificationModule();

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -198,13 +198,6 @@ T1000xSensor t1000xSensor;
 IndicatorSensor indicatorSensor;
 #endif
 
-#if __has_include(<Adafruit_TSL2561_U.h>)
-#include "Sensor/TSL2561Sensor.h"
-TSL2561Sensor tsl2561Sensor;
-#else
-NullSensor tsl2561Sensor;
-#endif
-
 #define FAILED_STATE_SENSOR_READ_MULTIPLIER 10
 #define DISPLAY_RECEIVEID_MEASUREMENTS_ON_SCREEN true
 
@@ -303,8 +296,6 @@ int32_t EnvironmentTelemetryModule::runOnce()
                 result = max17048Sensor.runOnce();
             if (cgRadSens.hasSensor())
                 result = cgRadSens.runOnce();
-            if (tsl2561Sensor.hasSensor())
-                result = tsl2561Sensor.runOnce();
             if (pct2075Sensor.hasSensor())
                 result = pct2075Sensor.runOnce();
                 // this only works on the wismesh hub with the solar option. This is not an I2C sensor, so we don't need the
@@ -651,10 +642,6 @@ bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m
         valid = valid && nau7802Sensor.getMetrics(m);
         hasSensor = true;
     }
-    if (tsl2561Sensor.hasSensor()) {
-        valid = valid && tsl2561Sensor.getMetrics(m);
-        hasSensor = true;
-    }
     if (aht10Sensor.hasSensor()) {
         if (!bmp280Sensor.hasSensor() && !bmp3xxSensor.hasSensor()) {
             valid = valid && aht10Sensor.getMetrics(m);

src/modules/Telemetry/Sensor/TSL2561Sensor.cpp

@@ -1,41 +0,0 @@
-#include "configuration.h"
-
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_TSL2561_U.h>)
-
-#include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "TSL2561Sensor.h"
-#include "TelemetrySensor.h"
-#include <Adafruit_TSL2561_U.h>
-
-TSL2561Sensor::TSL2561Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_TSL2561, "TSL2561") {}
-
-int32_t TSL2561Sensor::runOnce()
-{
-    LOG_INFO("Init sensor: %s", sensorName);
-    if (!hasSensor()) {
-        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
-    }
-
-    status = tsl.begin(nodeTelemetrySensorsMap[sensorType].second);
-
-    return initI2CSensor();
-}
-
-void TSL2561Sensor::setup()
-{
-    tsl.setGain(TSL2561_GAIN_1X);
-    tsl.setIntegrationTime(TSL2561_INTEGRATIONTIME_101MS);
-}
-
-bool TSL2561Sensor::getMetrics(meshtastic_Telemetry *measurement)
-{
-    measurement->variant.environment_metrics.has_lux = true;
-    sensors_event_t event;
-    tsl.getEvent(&event);
-    measurement->variant.environment_metrics.lux = event.light;
-    LOG_INFO("Lux: %f", measurement->variant.environment_metrics.lux);
-
-    return true;
-}
-
-#endif

src/modules/Telemetry/Sensor/TSL2561Sensor.h

@@ -1,23 +0,0 @@
-#include "configuration.h"
-
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_TSL2561_U.h>)
-
-#include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "TelemetrySensor.h"
-#include <Adafruit_TSL2561_U.h>
-
-class TSL2561Sensor : public TelemetrySensor
-{
-  private:
-    // The magic number is a sensor id, the actual value doesn't matter
-    Adafruit_TSL2561_Unified tsl = Adafruit_TSL2561_Unified(TSL2561_ADDR_LOW, 12345);
-
-  protected:
-    virtual void setup() override;
-
-  public:
-    TSL2561Sensor();
-    virtual int32_t runOnce() override;
-    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
-};
-#endif

src/motion/BMX160Sensor.h

@@ -7,7 +7,7 @@
 
 #if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 
-#if !defined(RAK2560) && __has_include(<Rak_BMX160.h>)
+#if defined(RAK_4631) && !defined(RAK2560) && __has_include(<Rak_BMX160.h>)
 
 #include "Fusion/Fusion.h"
 #include <Rak_BMX160.h>

src/sleep.cpp

@@ -431,6 +431,15 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
         gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
 #endif
 
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power down XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, LOW);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.digitalWrite(EXPANDS_KB_EN, LOW);
+    io.digitalWrite(EXPANDS_SD_EN, LOW);
+    io.digitalWrite(EXPANDS_GPIO_EN, LOW);
+#endif
+
     auto res = esp_sleep_enable_gpio_wakeup();
     if (res != ESP_OK) {
         LOG_ERROR("esp_sleep_enable_gpio_wakeup result %d", res);
@@ -471,6 +480,14 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
         gpio_wakeup_disable((gpio_num_t)RF95_IRQ);
     }
 #endif
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power up XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+#endif
 
     esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
     notifyLightSleepEnd.notifyObservers(cause); // Button interrupts are reattached here

test/test_meshpacket_serializer/ports/test_encrypted.cpp

@@ -1,9 +1,20 @@
 #include "../test_helpers.h"
 
-// Helper function for all encrypted packet assertions
-void assert_encrypted_packet(const std::string &json, meshtastic_MeshPacket packet)
+// Test encrypted packet serialization
+void test_encrypted_packet_serialization()
 {
-    // Parse and validate JSON
+    meshtastic_MeshPacket packet = meshtastic_MeshPacket_init_zero;
+    packet.from = 0x11223344;
+    packet.to = 0x55667788;
+    packet.id = 0x9999;
+    packet.which_payload_variant = meshtastic_MeshPacket_encrypted_tag;
+
+    // Add some dummy encrypted data
+    const char *encrypted_data = "encrypted_payload_data";
+    packet.encrypted.size = strlen(encrypted_data);
+    memcpy(packet.encrypted.bytes, encrypted_data, packet.encrypted.size);
+
+    std::string json = MeshPacketSerializer::JsonSerializeEncrypted(&packet);
     TEST_ASSERT_TRUE(json.length() > 0);
 
     JSONValue *root = JSON::Parse(json.c_str());
@@ -12,48 +23,28 @@ void assert_encrypted_packet(const std::string &json, meshtastic_MeshPacket pack
 
     JSONObject jsonObj = root->AsObject();
 
-    // Assert basic packet fields
+    // Check basic packet fields
     TEST_ASSERT_TRUE(jsonObj.find("from") != jsonObj.end());
-    TEST_ASSERT_EQUAL(packet.from, (uint32_t)jsonObj.at("from")->AsNumber());
+    TEST_ASSERT_EQUAL(0x11223344, (uint32_t)jsonObj["from"]->AsNumber());
 
     TEST_ASSERT_TRUE(jsonObj.find("to") != jsonObj.end());
-    TEST_ASSERT_EQUAL(packet.to, (uint32_t)jsonObj.at("to")->AsNumber());
+    TEST_ASSERT_EQUAL(0x55667788, (uint32_t)jsonObj["to"]->AsNumber());
 
     TEST_ASSERT_TRUE(jsonObj.find("id") != jsonObj.end());
-    TEST_ASSERT_EQUAL(packet.id, (uint32_t)jsonObj.at("id")->AsNumber());
+    TEST_ASSERT_EQUAL(0x9999, (uint32_t)jsonObj["id"]->AsNumber());
 
-    // Assert encrypted data fields
+    // Check that it has encrypted data fields (not "payload" but "bytes" and "size")
     TEST_ASSERT_TRUE(jsonObj.find("bytes") != jsonObj.end());
-    TEST_ASSERT_TRUE(jsonObj.at("bytes")->IsString());
+    TEST_ASSERT_TRUE(jsonObj["bytes"]->IsString());
 
     TEST_ASSERT_TRUE(jsonObj.find("size") != jsonObj.end());
-    TEST_ASSERT_EQUAL(packet.encrypted.size, (int)jsonObj.at("size")->AsNumber());
+    TEST_ASSERT_EQUAL(22, (int)jsonObj["size"]->AsNumber()); // strlen("encrypted_payload_data") = 22
 
-    // Assert hex encoding
+    // The encrypted data should be hex-encoded
     std::string encrypted_hex = jsonObj["bytes"]->AsString();
-    TEST_ASSERT_EQUAL(packet.encrypted.size * 2, encrypted_hex.length());
+    TEST_ASSERT_TRUE(encrypted_hex.length() > 0);
+    // Should be twice the size of the original data (hex encoding)
+    TEST_ASSERT_EQUAL(44, encrypted_hex.length()); // 22 * 2 = 44
 
     delete root;
 }
-
-// Test encrypted packet serialization
-void test_encrypted_packet_serialization()
-{
-    const char *data = "encrypted_payload_data";
-    meshtastic_MeshPacket packet =
-        create_test_packet(meshtastic_PortNum_TEXT_MESSAGE_APP, reinterpret_cast<const uint8_t *>(data), strlen(data),
-                           meshtastic_MeshPacket_encrypted_tag);
-    std::string json = MeshPacketSerializer::JsonSerializeEncrypted(&packet);
-
-    assert_encrypted_packet(json, packet);
-}
-
-// Test empty encrypted packet
-void test_empty_encrypted_packet()
-{
-    meshtastic_MeshPacket packet =
-        create_test_packet(meshtastic_PortNum_TEXT_MESSAGE_APP, nullptr, 0, meshtastic_MeshPacket_encrypted_tag);
-    std::string json = MeshPacketSerializer::JsonSerializeEncrypted(&packet);
-
-    assert_encrypted_packet(json, packet);
-}

test/test_meshpacket_serializer/test_helpers.h

@@ -11,8 +11,7 @@
 #include <unity.h>
 
 // Helper function to create a test packet with the given port and payload
-static meshtastic_MeshPacket create_test_packet(meshtastic_PortNum port, const uint8_t *payload, size_t payload_size,
-                                                int payload_variant = meshtastic_MeshPacket_decoded_tag)
+static meshtastic_MeshPacket create_test_packet(meshtastic_PortNum port, const uint8_t *payload, size_t payload_size)
 {
     meshtastic_MeshPacket packet = meshtastic_MeshPacket_init_zero;
 
@@ -30,12 +29,8 @@ static meshtastic_MeshPacket create_test_packet(meshtastic_PortNum port, const u
     packet.delayed = meshtastic_MeshPacket_Delayed_NO_DELAY;
 
     // Set decoded variant
-    packet.which_payload_variant = payload_variant;
+    packet.which_payload_variant = meshtastic_MeshPacket_decoded_tag;
     packet.decoded.portnum = port;
-    if (payload_variant == meshtastic_MeshPacket_encrypted_tag && payload) {
-        packet.encrypted.size = payload_size;
-        memcpy(packet.encrypted.bytes, payload, packet.encrypted.size);
-    }
     memcpy(packet.decoded.payload.bytes, payload, payload_size);
     packet.decoded.payload.size = payload_size;
     packet.decoded.want_response = false;

test/test_meshpacket_serializer/test_serializer.cpp

@@ -4,10 +4,6 @@
 
 // Forward declarations for test functions
 void test_text_message_serialization();
-void test_text_message_serialization_null();
-void test_text_message_serialization_long_text();
-void test_text_message_serialization_oversized();
-void test_text_message_serialization_invalid_utf8();
 void test_position_serialization();
 void test_nodeinfo_serialization();
 void test_waypoint_serialization();
@@ -18,7 +14,6 @@ void test_telemetry_environment_metrics_missing_fields();
 void test_telemetry_environment_metrics_complete_coverage();
 void test_telemetry_environment_metrics_unset_fields();
 void test_encrypted_packet_serialization();
-void test_empty_encrypted_packet();
 
 void setup()
 {
@@ -26,10 +21,6 @@ void setup()
 
     // Text message tests
     RUN_TEST(test_text_message_serialization);
-    RUN_TEST(test_text_message_serialization_null);
-    RUN_TEST(test_text_message_serialization_long_text);
-    RUN_TEST(test_text_message_serialization_oversized);
-    RUN_TEST(test_text_message_serialization_invalid_utf8);
 
     // Position tests
     RUN_TEST(test_position_serialization);
@@ -50,7 +41,6 @@ void setup()
 
     // Encrypted packet test
     RUN_TEST(test_encrypted_packet_serialization);
-    RUN_TEST(test_empty_encrypted_packet);
 
     UNITY_END();
 }

variants/esp32/diy/9m2ibr_aprs_lora_tracker/platformio.ini

@@ -1,12 +0,0 @@
-; 9M2IBR APRS LoRa Tracker: ESP32-WROOM-32 + EBYTE E22-400M30S
-; https://shopee.com.my/product/1095224/21692283917
-[env:9m2ibr_aprs_lora_tracker]
-extends = esp32_base
-board = esp32doit-devkit-v1
-board_level = extra
-build_flags =
-  ${esp32_base.build_flags}
-  -D PRIVATE_HW
-  -D EBYTE_E22
-  -D EBYTE_E22_900M30S ; Assume Tx power curve is identical to 900M30S as there is no documentation
-  -I variants/esp32/diy/9m2ibr_aprs_lora_tracker

variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.h

@@ -1,74 +0,0 @@
-/*
-
-  9M2IBR APRS LoRa Tracker: ESP32-WROOM-32 + EBYTE E22-400M30S
-  https://shopee.com.my/product/1095224/21692283917
-
-  Originally developed for LoRa_APRS_iGate and GPIO is similar to
-  https://github.com/richonguzman/LoRa_APRS_iGate/blob/main/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/board_pinout.h
-
-*/
-
-// OLED (may be different controllers depending on screen size)
-#define I2C_SDA 21
-#define I2C_SCL 22
-#define HAS_SCREEN 1 // Generates randomized BLE pin
-
-// GNSS: Ai-Thinker GP-02 BDS/GNSS module
-#define GPS_RX_PIN 16
-#define GPS_TX_PIN 17
-
-// Button
-#define BUTTON_PIN 15 // Right side button - if not available, set device.button_gpio to 0 from Meshtastic client
-
-// LEDs
-#define LED_PIN 13 // Tx LED
-#define USER_LED 2 // Rx LED
-
-// Buzzer
-#define PIN_BUZZER 33
-
-// Battery sense
-#define BATTERY_PIN 35
-#define ADC_MULTIPLIER 2.01 // 100k + 100k, and add 1% tolerance
-#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
-#define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
-
-// SPI
-#define LORA_SCK 18
-#define LORA_MISO 19
-#define LORA_MOSI 23
-
-// LoRa
-#define LORA_CS 5
-#define LORA_DIO0 26          // a No connect on the SX1262/SX1268 module
-#define LORA_RESET 27         // RST for SX1276, and for SX1262/SX1268
-#define LORA_DIO1 12          // IRQ for SX1262/SX1268
-#define LORA_DIO2 RADIOLIB_NC // BUSY for SX1262/SX1268
-#define LORA_DIO3             // NC, but used as TCXO supply by E22 module
-#define LORA_RXEN 32          // RF switch RX (and E22 LNA) control by ESP32 GPIO
-#define LORA_TXEN 25          // RF switch TX (and E22 PA) control by ESP32 GPIO
-
-// RX/TX for RFM95/SX127x
-#define RF95_RXEN LORA_RXEN
-#define RF95_TXEN LORA_TXEN
-// #define RF95_TCXO <GPIO#>
-
-// common pinouts for SX126X modules
-#define SX126X_CS 5
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_BUSY LORA_DIO2
-#define SX126X_RESET LORA_RESET
-#define SX126X_RXEN LORA_RXEN
-#define SX126X_TXEN LORA_TXEN
-
-// Support alternative modules if soldered in place of E22
-#define USE_RF95 // RFM95/SX127x
-#define USE_SX1262
-#define USE_SX1268
-#define USE_LLCC68
-
-// E22 TCXO support
-#ifdef EBYTE_E22
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
-#endif

variants/esp32/heltec_wireless_bridge/platformio.ini

@@ -1,7 +1,6 @@
 [env:heltec-wireless-bridge]
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base
-board_level = extra
 board = heltec_wifi_lora_32
 build_flags = 
   ${esp32_base.build_flags}

variants/esp32/trackerd/platformio.ini

@@ -1,6 +1,5 @@
 [env:trackerd]
 extends = esp32_base
-board_level = extra
 board = pico32
 board_build.f_flash = 80000000L
 

variants/esp32s3/picomputer-s3/platformio.ini

@@ -2,7 +2,7 @@
 extends = esp32s3_base
 board = bpi_picow_esp32_s3
 board_check = true
-board_build.partitions = partition-table-8MB.csv
+board_build.partitions = default_8MB.csv
 ;OpenOCD flash method
 ;upload_protocol = esp-builtin
 ;Normal method

variants/esp32s3/rak_wismesh_tap_v2/pins_arduino.h

@@ -1,28 +0,0 @@
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include "variant.h"
-#include <stdint.h>
-
-#define USB_VID 0x303a
-#define USB_PID 0x1001
-
-// The default Wire will be mapped to PMU and RTC
-static const uint8_t SDA = 9;
-static const uint8_t SCL = 40;
-
-// Default SPI will be mapped to Radio
-static const uint8_t SS = 12;
-static const uint8_t MOSI = 11;
-static const uint8_t MISO = 10;
-static const uint8_t SCK = 13;
-
-#define SPI_MOSI (11)
-#define SPI_SCK (13)
-#define SPI_MISO (10)
-#define SPI_CS (12)
-
-// LEDs
-#define LED_BUILTIN LED_GREEN
-
-#endif /* Pins_Arduino_h */

variants/esp32s3/rak_wismesh_tap_v2/platformio.ini

@@ -1,87 +0,0 @@
-; rak_wismeshtap2 rak3112
-
-[rak_wismeshtap_s3]
-extends = esp32s3_base
-board = wiscore_rak3312
-board_check = true
-upload_protocol = esptool
-board_build.partitions = default_8MB.csv
-
-build_flags = 
-  ${esp32_base.build_flags} 
-  -D RAK3312
-  -D RAK_WISMESH_TAP_V2 
-  -I variants/esp32s3/rak_wismesh_tap_v2
-
-lib_deps =
-  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
-
-[ft5x06]
-extends = mesh_tab_base
-build_flags = 
-  -D LGFX_TOUCH=FT5x06
-  -D LGFX_TOUCH_I2C_FREQ=100000
-  -D LGFX_TOUCH_I2C_PORT=0
-  -D LGFX_TOUCH_I2C_ADDR=0x38
-  -D LGFX_TOUCH_I2C_SDA=9
-  -D LGFX_TOUCH_I2C_SCL=40
-  -D LGFX_TOUCH_RST=-1
-  -D LGFX_TOUCH_INT=39
-
-[env:rak_wismesh_tap_v2-tft]
-extends = rak_wismeshtap_s3
-
-build_flags =
-  ${rak_wismeshtap_s3.build_flags}
-  -D CONFIG_ARDUHAL_ESP_LOG
-  -D CONFIG_ARDUHAL_LOG_COLORS=1
-  -D CONFIG_DISABLE_HAL_LOCKS=1
-  -D LV_LVGL_H_INCLUDE_SIMPLE
-  -D LV_CONF_INCLUDE_SIMPLE
-  -D LV_COMP_CONF_INCLUDE_SIMPLE
-  -D LV_USE_SYSMON=0
-  -D LV_USE_PROFILER=0
-  -D LV_USE_PERF_MONITOR=0
-  -D LV_USE_MEM_MONITOR=0
-  -D LV_USE_LOG=0
-  -D LV_BUILD_TEST=0
-  -D USE_LOG_DEBUG
-  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
-  -D RADIOLIB_SPI_PARANOID=0
-  -D INPUTDRIVER_BUTTON_TYPE=0
-  -D HAS_SDCARD
-  -D HAS_SCREEN=0
-  -D HAS_TFT=1
-  -D USE_PIN_BUZZER=PIN_BUZZER
-  -D RAM_SIZE=5120
-  -D LGFX_DRIVER_TEMPLATE
-  -D LGFX_DRIVER=LGFX_GENERIC
-  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_GENERIC.h\"
-  -D LGFX_PIN_SCK=13
-  -D LGFX_PIN_MOSI=11
-  -D LGFX_PIN_MISO=10
-  -D LGFX_PIN_DC=42
-  -D LGFX_PIN_CS=12
-  -D LGFX_PIN_RST=-1
-  -D LGFX_PIN_BL=41
-  -D VIEW_320x240
-  -D USE_PACKET_API
-  ${ft5x06.build_flags}
-  -D LGFX_SCREEN_WIDTH=240
-  -D LGFX_SCREEN_HEIGHT=320
-  -D LGFX_PANEL=ST7789
-  -D LGFX_ROTATION=1
-  -D LGFX_TOUCH_X_MIN=0
-  -D LGFX_TOUCH_X_MAX=239
-  -D LGFX_TOUCH_Y_MIN=0
-  -D LGFX_TOUCH_Y_MAX=319
-  -D LGFX_TOUCH_ROTATION=2
-  -D LGFX_CFG_HOST=SPI3_HOST
-  -D MAP_FULL_REDRAW=1
-
-lib_deps =
-  ${rak_wismeshtap_s3.lib_deps}
-  ${device-ui_base.lib_deps}
-
-

variants/esp32s3/rak_wismesh_tap_v2/variant.h

@@ -1,71 +0,0 @@
-#ifndef _VARIANT_RAK_WISMESHTAP_V2_H
-#define _VARIANT_RAK_WISMESHTAP_V2_H
-
-#define I2C_SDA 9
-#define I2C_SCL 40
-
-#define USE_SX1262
-
-#define LORA_SCK 5
-#define LORA_MISO 3
-#define LORA_MOSI 6
-#define LORA_CS 7
-#define LORA_RESET 8
-
-#ifdef USE_SX1262
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 47
-#define SX126X_BUSY 48
-#define SX126X_RESET LORA_RESET
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#endif
-
-#define SX126X_POWER_EN (4)
-
-#define PIN_POWER_EN PIN_3V3_EN
-#define PIN_3V3_EN (14)
-
-#define LED_GREEN 46
-#define LED_BLUE 45
-
-#define PIN_LED1 LED_GREEN
-#define PIN_LED2 LED_BLUE
-
-#define LED_CONN LED_BLUE
-#define LED_PIN LED_GREEN
-#define ledOff(pin) pinMode(pin, INPUT)
-
-#define LED_STATE_ON 1 // State when LED is litted
-
-#define HAS_GPS 1
-#define GPS_TX_PIN 43
-#define GPS_RX_PIN 44
-
-#define SPI_MOSI (11)
-#define SPI_SCK (13)
-#define SPI_MISO (10)
-#define SPI_CS (12)
-
-#define HAS_BUTTON 1
-#define BUTTON_PIN 0
-
-#define CANNED_MESSAGE_MODULE_ENABLE 1
-#define USE_VIRTUAL_KEYBOARD 1
-
-#define BATTERY_PIN 1
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
-#define ADC_MULTIPLIER 1.667
-
-#define PIN_BUZZER 38
-
-#define HAS_SDCARD 1
-#define SDCARD_USE_SPI1 1
-#define SDCARD_CS 2
-
-#define SPI_FREQUENCY 40000000
-#define SPI_READ_FREQUENCY 16000000
-
-#define SD_SPI_FREQUENCY 50000000
-
-#endif

variants/esp32s3/seeed-sensecap-indicator/platformio.ini

@@ -6,7 +6,7 @@ platform_packages =
 
 board = seeed-sensecap-indicator
 board_check = true
-board_build.partitions = partition-table-8MB.csv
+board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 
 build_flags = ${esp32_base.build_flags}

variants/esp32s3/tlora-pager/platformio.ini

@@ -26,7 +26,7 @@ lib_deps = ${esp32s3_base.lib_deps}
   lewisxhe/SensorLib@0.3.1
   https://github.com/pschatzmann/arduino-audio-driver/archive/refs/tags/v0.1.3.zip
   https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
-  https://github.com/mverch67/RotaryEncoder/archive/25a59d5745a6645536f921427d80b08e78f886d4.zip
+  https://github.com/mverch67/RotaryEncoder
 
 [env:tlora-pager-tft]
 board_level = extra

variants/esp32s3/unphone/platformio.ini

@@ -3,7 +3,7 @@
 [env:unphone]
 extends = esp32s3_base
 board = unphone
-board_build.partitions = partition-table-8MB.csv
+board_build.partitions = default_8MB.csv
 upload_speed = 921600
 monitor_speed = 115200
 monitor_filters = esp32_exception_decoder
@@ -20,7 +20,6 @@ build_flags =
   -D UNPHONE_LORA=0
   -D UNPHONE_FACTORY_MODE=0
   -D USE_SX127x
-  -D SDCARD_CS=43
 
 build_src_filter =
   ${esp32s3_base.build_src_filter}
@@ -42,7 +41,6 @@ build_flags =
   -D HAS_SCREEN=1
   -D HAS_TFT=1
   -D HAS_SDCARD
-  -D SDCARD_CS=43
   -D DISPLAY_SET_RESOLUTION
   -D RAM_SIZE=6144
   -D LV_CACHE_DEF_SIZE=2097152

variants/esp32s3/unphone/variant.h

@@ -52,6 +52,7 @@
 #undef GPS_TX_PIN
 
 #define SD_SPI_FREQUENCY 25000000
+#define SDCARD_CS 43
 
 #define LED_PIN 13     // the red part of the RGB LED
 #define LED_STATE_ON 0 // State when LED is lit

variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini

@@ -1,7 +1,6 @@
 ; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
 [env:gat562_mesh_trial_tracker]
 extends = nrf52840_base
-board_level = extra
 board = gat562_mesh_trial_tracker
 board_check = true
 build_flags = ${nrf52840_base.build_flags}

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -208,7 +208,7 @@ No longer populated on PCB
 #undef AREF_VOLTAGE
 #define AREF_VOLTAGE 3.0
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
-#define ADC_MULTIPLIER (4.916F)
+#define ADC_MULTIPLIER (4.99F)
 
 #define HAS_RTC 0
 #ifdef __cplusplus

variants/nrf52840/meshlink/platformio.ini

@@ -4,7 +4,6 @@
 [env:meshlink]
 extends = nrf52840_base
 board = meshlink
-board_level = extra
 ;board_check = true
 build_flags = ${nrf52840_base.build_flags}
   -I variants/nrf52840/meshlink

variants/nrf52840/meshlink_eink/platformio.ini

@@ -4,7 +4,6 @@
 [env:meshlink_eink]
 extends = nrf52840_base
 board = meshlink
-board_level = extra
 ;board_check = true
 build_flags = ${nrf52840_base.build_flags}
   -I variants/nrf52840/meshlink_eink

variants/nrf52840/rak4631/platformio.ini

@@ -22,7 +22,6 @@ lib_deps =
   https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
   rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
   beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
   https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)

variants/nrf52840/rak4631_eth_gw/platformio.ini

@@ -31,8 +31,7 @@ lib_deps =
   melopero/Melopero RV3028@^1.1.0
   https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
   rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
-  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
+  https://github.com/meshtastic/RAK12034-BMX160/archive/4821355fb10390ba8557dc43ca29a023bcfbb9d9.zip
   bblanchon/ArduinoJson @ 6.21.4
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds

variants/rp2040/challenger_2040_lora/pins_arduino.h

@@ -1,79 +0,0 @@
-#pragma once
-
-#define PINS_COUNT (25u)
-#define NUM_DIGITAL_PINS (25u)
-#define NUM_ANALOG_INPUTS (4u)
-#define NUM_ANALOG_OUTPUTS (0u)
-#define ADC_RESOLUTION (12u)
-
-// LEDs
-#define PIN_LED (24u)
-
-// Serial
-#define PIN_SERIAL1_TX (16u)
-#define PIN_SERIAL1_RX (17u)
-
-// SPI
-#define PIN_SPI0_MISO (20u)
-#define PIN_SPI0_MOSI (23u)
-#define PIN_SPI0_SCK (22u)
-#define PIN_SPI0_SS (21u)
-
-// Connected to LoRa module
-#define PIN_SPI1_MISO (12u)
-#define PIN_SPI1_MOSI (11u)
-#define PIN_SPI1_SCK (10u)
-#define PIN_SPI1_SS (9u)
-#define RFM95W_SS (9u)
-#define RFM95W_DIO0 (14u)
-#define RFM95W_DIO1 (15u)
-#define RFM95W_DIO2 (18u)
-#define RFM95W_RST (13u)
-#define RFM95W_SPI SPI1
-
-// Wire
-#define PIN_WIRE0_SDA (0u)
-#define PIN_WIRE0_SCL (1u)
-
-// Not pinned out
-#define PIN_WIRE1_SDA (31u)
-#define PIN_WIRE1_SCL (31u)
-#define PIN_SERIAL2_RX (31u)
-#define PIN_SERIAL2_TX (31u)
-
-#define SERIAL_HOWMANY (1u)
-#define SPI_HOWMANY (2u)
-#define WIRE_HOWMANY (1u)
-
-#define LED_BUILTIN PIN_LED
-
-static const uint8_t D0 = (16u);
-static const uint8_t D1 = (17u);
-static const uint8_t D2 = (20u);
-static const uint8_t D3 = (23u);
-static const uint8_t D4 = (22u);
-static const uint8_t D5 = (2u);
-static const uint8_t D6 = (3u);
-static const uint8_t D7 = (0u);
-static const uint8_t D8 = (1u);
-static const uint8_t D9 = (4u);
-static const uint8_t D10 = (5u);
-static const uint8_t D11 = (6u);
-static const uint8_t D12 = (7u);
-static const uint8_t D13 = (8u);
-static const uint8_t D14 = (13u);
-static const uint8_t D15 = (14u);
-static const uint8_t D16 = (15u);
-static const uint8_t D17 = (18u);
-static const uint8_t D18 = (24u);
-
-static const uint8_t A0 = (26u);
-static const uint8_t A1 = (27u);
-static const uint8_t A2 = (28u);
-static const uint8_t A3 = (29u);
-static const uint8_t A4 = (19u);
-static const uint8_t A5 = (21u);
-
-#ifndef SS
-#define SS PIN_SPI1_SS
-#endif

variants/rp2040/challenger_2040_lora/platformio.ini

@@ -1,16 +0,0 @@
-[env:challenger_2040_lora]
-extends = rp2040_base
-board = challenger_2040_lora
-board_level = extra
-upload_protocol = picotool
-# add our variants files to the include and src paths
-build_flags = 
-  ${rp2040_base.build_flags} 
-  -D PRIVATE_HW
-  -I variants/rp2040/challenger_2040_lora
-  -D DEBUG_RP2040_PORT=Serial
-  -D HW_SPI1_DEVICE
-lib_deps =
-  ${rp2040_base.lib_deps}
-debug_build_flags = ${rp2040_base.build_flags}
-debug_tool = cmsis-dap ; for e.g. Picotool

variants/rp2040/challenger_2040_lora/variant.h

@@ -1,39 +0,0 @@
-// Define SS for compatibility with libraries expecting a default SPI chip select pin
-
-#define ARDUINO_ARCH_AVR
-
-#define EXT_NOTIFY_OUT 0xFFFFFFFF
-#define BUTTON_PIN 0xFFFFFFFF
-
-#define LED_PIN PIN_LED
-
-#define USE_RF95 // RFM95/SX127x
-
-#undef LORA_SCK
-#undef LORA_MISO
-#undef LORA_MOSI
-#undef LORA_CS
-
-// https://gitlab.com/invectorlabs/hw/challenger_rp2040_lora
-#define LORA_SCK 10  // Clock
-#define LORA_CS 9    // Chip Select
-#define LORA_MOSI 11 // Serial Data Out
-#define LORA_MISO 12 // Serial Data In
-
-#define LORA_RESET 13 // Reset
-
-#define LORA_DIO0 14         // DIO0
-#define LORA_DIO1 15         // DIO1
-#define LORA_DIO2 18         // DIO2
-#define LORA_DIO3 0xFFFFFFFF // Not connected
-#define LORA_DIO4 0xFFFFFFFF // Not connected
-#define LORA_DIO5 0xFFFFFFFF // Not connected
-
-#ifdef USE_SX1262
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_BUSY LORA_DIO2
-#define SX126X_RESET LORA_RESET
-#define SX126X_DIO2_AS_RF_SWITCH
-// #define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#endif

variants/rp2040/ec_catsniffer/platformio.ini

@@ -1,7 +1,6 @@
 [env:catsniffer]
 extends = rp2040_base
 board = rpipico
-board_level = extra
 upload_protocol = picotool
 build_flags = 
   ${rp2040_base.build_flags}

variants/stm32/CDEBYTE_E77-MBL/platformio.ini

@@ -12,5 +12,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
   -DMESHTASTIC_EXCLUDE_I2C=1
   -DMESHTASTIC_EXCLUDE_GPS=1
+  ;-DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF
+  ;-DCFG_DEBUG
 
 upload_port = stlink

variants/stm32/CDEBYTE_E77-MBL/rfswitch.h

@@ -1,9 +0,0 @@
-// From E77-900M22S Product Specification
-// https://www.cdebyte.com/pdf-down.aspx?id=2963
-// Note 1: PA6 and PA7 pins are used as internal control RF switches of the module, PA6 = RF_TXEN, PA7 = RF_RXEN, RF_TXEN=1
-// RF_RXEN=0 is the transmit channel, and RF_TXEN=0 RF_RXEN=1 is the receiving channel
-
-static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA7, PA6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[4] = {
-    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

variants/stm32/CDEBYTE_E77-MBL/variant.h

@@ -18,4 +18,5 @@ Do not expect a working Meshtastic device with this target.
 #define LED_PIN PB4 // LED1
 // #define LED_PIN PB3 // LED2
 #define LED_STATE_ON 1
+
 #endif

variants/stm32/rak3172/platformio.ini

@@ -15,5 +15,5 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
   -DMESHTASTIC_EXCLUDE_I2C=1
   -DMESHTASTIC_EXCLUDE_GPS=1
-
+  ;-DCFG_DEBUG
 upload_port = stlink

variants/stm32/rak3172/rfswitch.h

@@ -1,7 +0,0 @@
-// Pins from https://forum.rakwireless.com/t/rak3172-internal-schematic/4557/2
-// PB8, PC13
-
-static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PB8, PC13, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[4] = {
-    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

variants/stm32/wio-e5/rfswitch.h

@@ -1,8 +0,0 @@
-/* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
- * Wio-E5 module ONLY transmits through RFO_HP
- * Receive: PA4=1, PA5=0
- * Transmit(high output power, SMPS mode): PA4=0, PA5=1 */
-static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA4, PA5, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[4] = {
-    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 7
-build = 9
+build = 8