Merge branch 'master' into moar-nxp

.clusterfuzzlite/router_fuzzer.cpp

@@ -76,7 +76,7 @@ bool loopCanSleep()
 // Called just prior to starting Meshtastic. Allows for setting config values before startup.
 void lateInitVariant()
 {
-    portduino_config.logoutputlevel = level_error;
+    settingsMap[logoutputlevel] = level_error;
     channelFile.channels[0] = meshtastic_Channel{
         .has_settings = true,
         .settings =
@@ -132,7 +132,7 @@ int portduino_main(int argc, char **argv); // Renamed "main" function from Mesht
 // Start Meshtastic in a thread and wait till it has reached the ON state.
 int LLVMFuzzerInitialize(int *argc, char ***argv)
 {
-    portduino_config.maxtophone = 5;
+    settingsMap[maxtophone] = 5;
 
     meshtasticThread = std::thread([program = *argv[0]]() {
         char nodeIdStr[12];

.github/actions/setup-base/action.yml

@@ -5,12 +5,17 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v5
+      uses: actions/checkout@v4
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
+    - name: Uncomment build epoch
+      shell: bash
+      run: |
+        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
     - name: Install dependencies
       shell: bash
       run: |
@@ -18,7 +23,7 @@ runs:
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
 
     - name: Setup Python
-      uses: actions/setup-python@v6
+      uses: actions/setup-python@v5
       with:
         python-version: 3.x
         cache: pip

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_esp32.yml

@@ -0,0 +1,40 @@
+name: Build ESP32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware.bin
+          ota_firmware_target: release/bleota.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_c3.yml

@@ -0,0 +1,40 @@
+name: Build ESP32-C3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c3:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32-C3
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_c6.yml

@@ -0,0 +1,40 @@
+name: Build ESP32-C6
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c6:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32-C6
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-c3.bin
+          ota_firmware_target: release/bleota-c3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32c6-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -0,0 +1,40 @@
+name: Build ESP32-S3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-s3:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build ESP32-S3
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: esp32
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+          ota_firmware_source: firmware-s3.bin
+          ota_firmware_target: release/bleota-s3.bin
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-esp32s3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_firmware.yml

@@ -1,66 +0,0 @@
-name: Build
-
-on:
-  workflow_call:
-    inputs:
-      version:
-        required: true
-        type: string
-      platform:
-        required: true
-        type: string
-      pio_env:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  pio-build:
-    name: build-${{ inputs.platform }}
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Set OTA firmware source and target
-        if: startsWith(inputs.platform, 'esp32')
-        id: ota_dir
-        env:
-          PIO_PLATFORM: ${{ inputs.platform }}
-        run: |
-          if [ "$PIO_PLATFORM" = "esp32s3" ]; then
-            echo "src=firmware-s3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-s3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32c3" ] || [ "$PIO_PLATFORM" = "esp32c6" ]; then
-            echo "src=firmware-c3.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota-c3.bin" >> $GITHUB_OUTPUT
-          elif [ "$PIO_PLATFORM" = "esp32" ]; then
-            echo "src=firmware.bin" >> $GITHUB_OUTPUT
-            echo "tgt=release/bleota.bin" >> $GITHUB_OUTPUT
-          fi
-
-      - name: Build ${{ inputs.platform }}
-        id: build
-        uses: fifieldt/gh-action-firmware@fifield
-        with:
-          pio_platform: ${{ inputs.platform }}
-          pio_env: ${{ inputs.pio_env }}
-          pio_target: build
-          ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
-          ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
-          overwrite: true
-          path: |
-            release/*.bin
-            release/*.elf
-            release/*.uf2
-            release/*.hex
-            release/*-ota.zip

.github/workflows/build_nrf52.yml

@@ -0,0 +1,40 @@
+name: Build NRF52
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-nrf52:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build NRF52
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: nrf52
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-nrf52840-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.uf2
+            release/*.elf
+            release/*.hex
+            release/*-ota.zip

.github/workflows/build_one_arch.yml

@@ -1,500 +0,0 @@
-name: Build One Arch
-
-on:
-  workflow_dispatch:
-    inputs:
-      arch:
-        type: choice
-        options:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - native
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{inputs.arch}} extra)
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{inputs.arch}} pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{inputs.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
-    outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  build-esp32:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32s3'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32c3'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'esp32c6'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'nrf52840'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'rp2040'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'rp2350'}}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'stm32' }}
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
-
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v5
-        with:
-          path: ./
-          pattern: firmware-${{inputs.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/build_one_target.yml

@@ -1,395 +0,0 @@
-name: Build One Target
-
-on:
-  workflow_dispatch:
-    inputs:
-      arch:
-        type: choice
-        options:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - native
-      target:
-        type: string
-        required: false
-        description: Choose the target board, e.g. nrf52_promicro_diy_tcxo. If blank, will find available targets.
-
-      # find-target:
-      #   type: boolean
-      #   default: true
-      #   description: 'Find the available targets'
-jobs:
-  find-targets:
-    if: ${{ inputs.target == '' }}
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} extra)
-          echo "Name: $GITHUB_REF_NAME" >> $GITHUB_STEP_SUMMARY
-          echo "Base: $GITHUB_BASE_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
-          echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
-          echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | sed 's/[][]//g; s/", "/\n- /g; s/"//g; s/^/- /' >> $GITHUB_STEP_SUMMARY
-
-  version:
-    if: ${{ inputs.target != '' }}
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  build-arch:
-    if: ${{ inputs.target != '' && inputs.arch != 'native' }}
-    needs: [version]
-    strategy:
-      fail-fast: false
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ inputs.target }}
-      platform: ${{ inputs.arch }}
-
-  build-debian-src:
-    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ inputs.arch == 'native' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  gather-artifacts:
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-latest
-    needs: [version, build-arch]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v5
-        with:
-          path: ./
-          pattern: firmware-*-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-*-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && inputs.target != ''}}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && inputs.target != ''}}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-*-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: debug-elfs-*-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' && inputs.target != '' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/build_rpi2040.yml

@@ -0,0 +1,38 @@
+name: Build RPI2040
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-rpi2040:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build Raspberry Pi 2040
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: rp2xx0
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-rp2040-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.uf2
+            release/*.elf

.github/workflows/build_stm32.yml

@@ -0,0 +1,39 @@
+name: Build STM32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-stm32:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Get release version string
+        shell: bash
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Build STM32WL
+        id: build
+        uses: meshtastic/gh-action-firmware@main
+        with:
+          pio_platform: stm32wl
+          pio_env: ${{ inputs.board }}
+          pio_target: build
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-stm32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: |
+            release/*.hex
+            release/*.bin
+            release/*.elf

.github/workflows/daily_packaging.yml

@@ -21,22 +21,16 @@ permissions:
 
 jobs:
   docker-multiarch:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_manifest.yml
     with:
       release_channel: daily
     secrets: inherit
 
   package-ppa:
-    if: github.repository == 'meshtastic/firmware'
     strategy:
       fail-fast: false
       matrix:
-        series:
+        series: [plucky, noble, jammy]
-          - jammy # 22.04 LTS
-          - noble # 24.04 LTS
-          - plucky # 25.04
-          - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: ppa:meshtastic/daily
@@ -44,7 +38,6 @@ jobs:
     secrets: inherit
 
   package-obs:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/package_obs.yml
     with:
       obs_project: network:Meshtastic:daily
@@ -52,7 +45,6 @@ jobs:
     secrets: inherit
 
   hook-copr:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/hook_copr.yml
     with:
       copr_project: daily

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -3,7 +3,7 @@ concurrency:
   group: ci-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
 on:
-  # # Triggers the workflow on push but only for the main branches
+  # # Triggers the workflow on push but only for the master branch
   push:
     branches:
       - master
@@ -19,7 +19,6 @@ on:
       - master
       - develop
       - event/*
-      - self-hosted-testing
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -28,39 +27,21 @@ on:
 
 jobs:
   setup:
-    if: github.repository == 'meshtastic/firmware'
     strategy:
       fail-fast: false
       matrix:
-        arch:
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - check
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - id: checkout
-      - uses: actions/setup-python@v6
+        uses: actions/checkout@v4
-        with:
+        name: Checkout base
-          python-version: 3.x
+      - id: jsonStep
-          cache: pip
-      - run: pip install -U platformio
-      - name: Uncomment build epoch
-        shell: bash
-        run: |
-          sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-      - name: Generate matrix
-        id: jsonStep
         run: |
           if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
+            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
           echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
@@ -71,26 +52,9 @@ jobs:
       esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
-  version:
-    if: github.repository == 'meshtastic/firmware'
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
   check:
     needs: setup
     strategy:
@@ -98,9 +62,9 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -108,92 +72,67 @@ jobs:
         run: bin/check-all.sh ${{ matrix.board }}
 
   build-esp32:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32.yml
     with:
-      version: ${{ needs.version.outputs.long }}
+      board: ${{ matrix.board }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
 
-  build-esp32s3:
+  build-esp32-s3:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_s3.yml
     with:
-      version: ${{ needs.version.outputs.long }}
+      board: ${{ matrix.board }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
 
-  build-esp32c3:
+  build-esp32-c3:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_c3.yml
     with:
-      version: ${{ needs.version.outputs.long }}
+      board: ${{ matrix.board }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
 
-  build-esp32c6:
+  build-esp32-c6:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_esp32_c6.yml
     with:
-      version: ${{ needs.version.outputs.long }}
+      board: ${{ matrix.board }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
 
-  build-nrf52840:
+  build-nrf52:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_nrf52.yml
     with:
-      version: ${{ needs.version.outputs.long }}
+      board: ${{ matrix.board }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
 
-  build-rp2040:
+  build-rpi2040:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_rpi2040.yml
     with:
-      version: ${{ needs.version.outputs.long }}
+      board: ${{ matrix.board }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
 
   build-stm32:
-    needs: [setup, version]
+    needs: setup
     strategy:
       fail-fast: false
       matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
+    uses: ./.github/workflows/build_stm32.yml
     with:
-      version: ${{ needs.version.outputs.long }}
+      board: ${{ matrix.board }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
 
   build-debian-src:
     if: github.repository == 'meshtastic/firmware'
@@ -211,11 +150,10 @@ jobs:
     secrets: inherit
 
   test-native:
-    if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
+    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
   docker-deb-amd64:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -224,7 +162,6 @@ jobs:
       push: false
 
   docker-deb-amd64-tft:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -234,7 +171,6 @@ jobs:
       pio_env: native-tft
 
   docker-alp-amd64:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -243,7 +179,6 @@ jobs:
       push: false
 
   docker-alp-amd64-tft:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -253,7 +188,6 @@ jobs:
       pio_env: native-tft
 
   docker-deb-arm64:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -262,7 +196,6 @@ jobs:
       push: false
 
   docker-deb-armv7:
-    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -271,44 +204,32 @@ jobs:
       push: false
 
   gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    if: github.repository == 'meshtastic/firmware'
     permissions:
       contents: write
       pull-requests: write
     strategy:
       fail-fast: false
       matrix:
-        arch:
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
     runs-on: ubuntu-latest
     needs:
       [
-        version,
         build-esp32,
-        build-esp32s3,
+        build-esp32-s3,
-        build-esp32c3,
+        build-esp32-c3,
-        build-esp32c6,
+        build-esp32-c6,
-        build-nrf52840,
+        build-nrf52,
-        build-rp2040,
+        build-rpi2040,
-        build-rp2350,
         build-stm32,
       ]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -317,13 +238,17 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Move files up
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -337,9 +262,9 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -353,12 +278,12 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -366,59 +291,66 @@ jobs:
       - uses: scruplelesswizard/comment-artifact@main
         if: ${{ github.event_name == 'pull_request' }}
         with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
   release-artifacts:
     runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
+    if: ${{ github.event_name == 'workflow_dispatch' }}
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
-      - version
       - gather-artifacts
       - build-debian-src
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+
       - name: Create release
         uses: softprops/action-gh-release@v2
         id: create_release
         with:
           draft: true
           prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
+          name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
+          tag_name: v${{ steps.version.outputs.long }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
+          pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
+          pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output/pio-deps-native-tft
 
       - name: Zip Linux sources
         working-directory: output
         run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
+          zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
+          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -428,8 +360,8 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
@@ -437,30 +369,26 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch:
+        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
     runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' && github.repository == 'meshtastic/firmware'}}
+    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
+    needs: [release-artifacts]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -473,16 +401,16 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
       - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
 
       # For diagnostics
       - name: Display structure of downloaded files
@@ -492,30 +420,33 @@ jobs:
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   publish-firmware:
     runs-on: ubuntu-24.04
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
+    needs: [release-firmware]
     env:
-      targets: |-
+      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
+          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
@@ -529,9 +460,9 @@ jobs:
           external_repository: meshtastic/meshtastic.github.io
           publish_branch: master
           publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
           keep_files: true
           user_name: github-actions[bot]
           user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
+          commit_message: ${{ steps.version.outputs.long }}
           enable_jekyll: true

.github/workflows/merge_queue.yml

@@ -1,508 +0,0 @@
-name: Merge Queue
-# Not sure how concurrency works in merge_queue, removing for now.
-# concurrency:
-#   group: merge-queue-${{ github.head_ref || github.run_id }}
-#   cancel-in-progress: true
-on:
-  # Merge group is a special trigger that is used to trigger the workflow when a merge group is created.
-  merge_group:
-
-env:
-  FAIL_FAST_PER_ARCH: true
-
-jobs:
-  setup:
-    strategy:
-      fail-fast: true
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-          - check
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-          cache: pip
-      - run: pip install -U platformio
-      - name: Generate matrix
-        id: jsonStep
-        run: |
-          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} pr)
-          fi
-          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
-          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
-    outputs:
-      esp32: ${{ steps.jsonStep.outputs.esp32 }}
-      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
-      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
-      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
-      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      rp2350: ${{ steps.jsonStep.outputs.rp2350 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
-      check: ${{ steps.jsonStep.outputs.check }}
-
-  version:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-    outputs:
-      long: ${{ steps.version.outputs.long }}
-      deb: ${{ steps.version.outputs.deb }}
-
-  check:
-    needs: setup
-    strategy:
-      fail-fast: true
-      matrix: ${{ fromJson(needs.setup.outputs.check) }}
-
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    steps:
-      - uses: actions/checkout@v5
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-      - name: Check ${{ matrix.board }}
-        run: bin/check-all.sh ${{ matrix.board }}
-
-  build-esp32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32
-
-  build-esp32s3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32s3
-
-  build-esp32c3:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c3
-
-  build-esp32c6:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: esp32c6
-
-  build-nrf52840:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: nrf52840
-
-  build-rp2040:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2040
-
-  build-rp2350:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.rp2350) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: rp2350
-
-  build-stm32:
-    needs: [setup, version]
-    strategy:
-      fail-fast: ${{ vars.FAIL_FAST_PER_ARCH == true }}
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_firmware.yml
-    with:
-      version: ${{ needs.version.outputs.long }}
-      pio_env: ${{ matrix.board }}
-      platform: stm32
-
-  build-debian-src:
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  package-pio-deps-native-tft:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/package_pio_deps.yml
-    with:
-      pio_env: native-tft
-    secrets: inherit
-
-  test-native:
-    if: ${{ !contains(github.ref_name, 'event/') }}
-    uses: ./.github/workflows/test_native.yml
-
-  docker-deb-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-deb-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-alp-amd64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-
-  docker-alp-amd64-tft:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: alpine
-      platform: linux/amd64
-      runs-on: ubuntu-24.04
-      push: false
-      pio_env: native-tft
-
-  docker-deb-arm64:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm64
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  docker-deb-armv7:
-    uses: ./.github/workflows/docker_build.yml
-    with:
-      distro: debian
-      platform: linux/arm/v7
-      runs-on: ubuntu-24.04-arm
-      push: false
-
-  gather-artifacts:
-    # trunk-ignore(checkov/CKV2_GHA_1)
-    permissions:
-      contents: write
-      pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    needs:
-      [
-        version,
-        build-esp32,
-        build-esp32s3,
-        build-esp32c3,
-        build-esp32c6,
-        build-nrf52840,
-        build-rp2040,
-        build-rp2350,
-        build-stm32,
-      ]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v5
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - uses: actions/download-artifact@v5
-        with:
-          path: ./
-          pattern: firmware-${{matrix.arch}}-*
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -R
-
-      - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
-
-      - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: |
-            ./firmware-*.bin
-            ./firmware-*.uf2
-            ./firmware-*.hex
-            ./firmware-*-ota.zip
-            ./device-*.sh
-            ./device-*.bat
-            ./littlefs-*.bin
-            ./bleota*bin
-            ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      # For diagnostics
-      - name: Show artifacts
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          overwrite: true
-          path: ./*.elf
-          retention-days: 30
-
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
-        with:
-          name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-
-  release-artifacts:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      - version
-      - gather-artifacts
-      - build-debian-src
-      - package-pio-deps-native-tft
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ needs.version.outputs.long }} Alpha
-          tag_name: v${{ needs.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download source deb
-        uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
-        with:
-          pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output/pio-deps-native-tft
-
-      - name: Zip Linux sources
-        working-directory: output
-        run: |
-          zip -j -9 -r ./meshtasticd-${{ needs.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip ./pio-deps-native-tft
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add Linux sources to GtiHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
-          gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch:
-          - esp32
-          - esp32s3
-          - esp32c3
-          - esp32c6
-          - nrf52840
-          - rp2040
-          - rp2350
-          - stm32
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts, version]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
-
-      - uses: actions/download-artifact@v5
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins and debug elfs to GitHub Release
-        # Only run when targeting master branch with workflow_dispatch
-        if: ${{ github.ref_name == 'master' }}
-        run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-          gh release upload v${{ needs.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-  publish-firmware:
-    runs-on: ubuntu-24.04
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-firmware, version]
-    env:
-      targets: |-
-        esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: 3.x
-
-      - uses: actions/download-artifact@v5
-        with:
-          pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
-          merge-multiple: true
-          path: ./publish
-
-      - name: Publish firmware to meshtastic.github.io
-        uses: peaceiris/actions-gh-pages@v4
-        env:
-          # On event/* branches, use the event name as the destination prefix
-          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
-        with:
-          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
-          external_repository: meshtastic/meshtastic.github.io
-          publish_branch: master
-          publish_dir: ./publish
-          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ needs.version.outputs.long }}
-          keep_files: true
-          user_name: github-actions[bot]
-          user_email: github-actions[bot]@users.noreply.github.com
-          commit_message: ${{ needs.version.outputs.long }}
-          enable_jekyll: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,14 +24,14 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -1,24 +0,0 @@
-name: Check PR Labels
-
-on:
-  pull_request:
-    types: [opened, edited, labeled, unlabeled, synchronize, reopened]
-
-permissions:
-  pull-requests: read
-  contents: read
-
-jobs:
-  check-label:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Check for PR labels
-        uses: actions/github-script@v8
-        with:
-          script: |
-            const labels = context.payload.pull_request.labels.map(label => label.name);
-            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
-            const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
-            if (!hasRequiredLabel) {
-              core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);
-            }

.github/workflows/pr_tests.yml

@@ -1,238 +0,0 @@
-name: Tests
-
-# DISABLED: Changed from automatic PR triggers to manual only
-on:
-  workflow_dispatch:
-    inputs:
-      reason:
-        description: "Reason for manual test run"
-        required: false
-        default: "Manual test execution"
-
-concurrency:
-  group: tests-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-permissions:
-  contents: read
-  actions: read
-  checks: write
-  pull-requests: write
-
-jobs:
-  native-tests:
-    name: "🧪 Native Tests"
-    if: github.repository == 'meshtastic/firmware'
-    uses: ./.github/workflows/test_native.yml
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-
-  test-summary:
-    name: "📊 Test Results"
-    runs-on: ubuntu-latest
-    needs: [native-tests]
-    if: always()
-    permissions:
-      contents: read
-      actions: read
-      checks: write
-      pull-requests: write
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          submodules: recursive
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Download test artifacts
-        if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v5
-        with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
-          merge-multiple: true
-
-      - name: Parse test results and create detailed summary
-        id: test-results
-        run: |
-          echo "## 🧪 Test Results Summary" >> $GITHUB_STEP_SUMMARY
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Check overall job status first
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "✅ **Overall Status**: PASSED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "failure" ]]; then
-            echo "❌ **Overall Status**: FAILED" >> $GITHUB_STEP_SUMMARY
-          elif [[ "${{ needs.native-tests.result }}" == "cancelled" ]]; then
-            echo "⏸️ **Overall Status**: CANCELLED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were cancelled before completion." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          else
-            echo "⚠️ **Overall Status**: SKIPPED" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Tests were skipped." >> $GITHUB_STEP_SUMMARY
-            exit 0
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-
-          # Parse detailed test results if available
-          if [ -f "testreport.xml" ]; then
-            echo "### 🔍 Individual Test Results" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            
-            python3 << 'EOF'
-          import xml.etree.ElementTree as ET
-          import os
-
-          try:
-              tree = ET.parse('testreport.xml')
-              root = tree.getroot()
-              
-              total_tests = 0
-              passed_tests = 0
-              failed_tests = 0
-              skipped_tests = 0
-              
-              # Parse testsuite elements
-              for testsuite in root.findall('.//testsuite'):
-                  suite_name = testsuite.get('name', 'Unknown')
-                  suite_tests = int(testsuite.get('tests', '0'))
-                  suite_failures = int(testsuite.get('failures', '0'))
-                  suite_errors = int(testsuite.get('errors', '0'))
-                  suite_skipped = int(testsuite.get('skipped', '0'))
-                  
-                  total_tests += suite_tests
-                  failed_tests += suite_failures + suite_errors
-                  skipped_tests += suite_skipped
-                  passed_tests += suite_tests - suite_failures - suite_errors - suite_skipped
-                  
-                  if suite_tests > 0:
-                      status = "✅" if (suite_failures + suite_errors) == 0 else "❌"
-                      print(f"**{status} Test Suite: {suite_name}**")
-                      print(f"- Total: {suite_tests}")
-                      print(f"- Passed: ✅ {suite_tests - suite_failures - suite_errors - suite_skipped}")
-                      print(f"- Failed: ❌ {suite_failures + suite_errors}")
-                      if suite_skipped > 0:
-                          print(f"- Skipped: ⏭️ {suite_skipped}")
-                      print("")
-                      
-                      # Show individual test results for failed suites
-                      if suite_failures + suite_errors > 0:
-                          print("**Failed Tests:**")
-                          for testcase in testsuite.findall('testcase'):
-                              test_name = testcase.get('name', 'Unknown')
-                              failure = testcase.find('failure')
-                              error = testcase.find('error')
-                              
-                              if failure is not None:
-                                  msg = failure.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: {msg}")
-                              elif error is not None:
-                                  msg = error.get('message', 'Unknown error')[:100]
-                                  print(f"- ❌ `{test_name}`: ERROR - {msg}")
-                          print("")
-                      else:
-                          # Show passed tests for successful suites
-                          passed_count = 0
-                          for testcase in testsuite.findall('testcase'):
-                              if testcase.find('failure') is None and testcase.find('error') is None:
-                                  if passed_count < 5:  # Limit to first 5 to avoid spam
-                                      test_name = testcase.get('name', 'Unknown')
-                                      print(f"- ✅ `{test_name}`: PASSED")
-                                  passed_count += 1
-                          if passed_count > 5:
-                              print(f"- ... and {passed_count - 5} more tests passed")
-                          print("")
-              
-              # Summary statistics
-              print("### 📊 Test Statistics")
-              print(f"- **Total Tests**: {total_tests}")
-              print(f"- **Passed**: ✅ {passed_tests}")
-              print(f"- **Failed**: ❌ {failed_tests}")
-              if skipped_tests > 0:
-                  print(f"- **Skipped**: ⏭️ {skipped_tests}")
-              
-              if failed_tests > 0:
-                  print(f"\n❌ **{failed_tests} tests failed out of {total_tests} total**")
-              else:
-                  print(f"\n✅ **All {total_tests} tests passed!**")
-                  
-          except Exception as e:
-              print(f"❌ Error parsing test results: {e}")
-          EOF
-          else
-            echo "⚠️ **No detailed test report available**" >> $GITHUB_STEP_SUMMARY
-            echo "" >> $GITHUB_STEP_SUMMARY
-            echo "Test artifacts may not have been generated properly." >> $GITHUB_STEP_SUMMARY
-          fi
-
-          echo "" >> $GITHUB_STEP_SUMMARY
-          echo "---" >> $GITHUB_STEP_SUMMARY
-          echo "View detailed logs in the [Actions tab](${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }})" >> $GITHUB_STEP_SUMMARY
-
-      - name: Comment test results on PR
-        if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
-        uses: actions/github-script@v8
-        with:
-          script: |
-            const fs = require('fs');
-
-            // Read the step summary to use as PR comment
-            let testSummary = "## 🧪 Test Results Summary\n\n";
-
-            if ("${{ needs.native-tests.result }}" === "success") {
-              testSummary += "✅ **All tests passed!**\n\n";
-            } else if ("${{ needs.native-tests.result }}" === "failure") {
-              testSummary += "❌ **Some tests failed.**\n\n";
-            } else {
-              testSummary += "⚠️ **Tests did not complete normally.**\n\n";
-            }
-
-            testSummary += `View detailed results: [Actions Run](${context.payload.repository.html_url}/actions/runs/${context.runId})\n\n`;
-            testSummary += "---\n";
-            testSummary += "*This comment will be automatically updated when new commits are pushed.*";
-
-            // Find existing comment
-            const comments = await github.rest.issues.listComments({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              issue_number: context.issue.number
-            });
-
-            const botComment = comments.data.find(comment => 
-              comment.user.type === 'Bot' && 
-              comment.body.includes('🧪 Test Results Summary')
-            );
-
-            if (botComment) {
-              // Update existing comment
-              await github.rest.issues.updateComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                comment_id: botComment.id,
-                body: testSummary
-              });
-            } else {
-              // Create new comment
-              await github.rest.issues.createComment({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: context.issue.number,
-                body: testSummary
-              });
-            }
-
-      - name: Set overall status
-        run: |
-          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
-            echo "All tests passed! ✅"
-            exit 0
-          else
-            echo "Some tests failed! ❌"
-            exit 1
-          fi

.github/workflows/release_channels.yml

@@ -20,11 +20,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        series:
+        series: [plucky, noble, jammy]
-          - jammy # 22.04 LTS
-          - noble # 24.04 LTS
-          - plucky # 25.04
-          - questing # 25.10
     uses: ./.github/workflows/package_ppa.yml
     with:
       ppa_repo: |-
@@ -60,10 +56,10 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v6
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -103,9 +99,8 @@ jobs:
         with:
           base: ${{ github.event.repository.default_branch }}
           branch: create-pull-request/bump-version
-          labels: github_actions
           title: Bump release version
-          commit-message: Automated version bumps
+          commit-message: automated bumps
           add-paths: |
             version.properties
             debian/changelog

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.0.0
+        uses: actions/stale@v9.1.0
         with:
           days-before-stale: 45
           exempt-issue-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,7 +137,7 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
@@ -150,7 +150,7 @@ jobs:
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v4
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       # - uses: actions/setup-python@v5
       #   with:
@@ -47,7 +47,7 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v5
+        uses: actions/setup-node@v4
         with:
           node-version: 22
 

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -39,7 +39,7 @@ jobs:
           git push
 
       - name: Comment on PR
-        uses: actions/github-script@v8
+        uses: actions/github-script@v7
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v4
         with:
           submodules: true
 
@@ -34,9 +34,7 @@ jobs:
         uses: peter-evans/create-pull-request@v7
         with:
           branch: create-pull-request/update-protobufs
-          labels: submodules
           title: Update protobufs and classes
-          commit-message: Update protobufs
           add-paths: |
             protobufs
             src/mesh

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.25.0
+  version: 1.24.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.2
+      ref: v1.7.1
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.471
+    - checkov@3.2.450
-    - renovate@41.115.6
+    - renovate@41.29.1
     - prettier@3.6.2
-    - trufflehog@3.90.6
+    - trufflehog@3.89.2
     - yamllint@1.37.1
     - bandit@1.8.6
-    - trivy@0.66.0
+    - trivy@0.64.1
-    - taplo@0.10.0
+    - taplo@0.9.3
-    - ruff@0.13.0
+    - ruff@0.12.2
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
     - actionlint@1.7.7
     - flake8@7.3.0
-    - hadolint@2.13.1
+    - hadolint@2.12.1-beta
     - shfmt@3.6.0
-    - shellcheck@0.11.0
+    - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.28.0
+    - gitleaks@8.27.2
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-slim-trixie AS builder
+FROM python:3.13-bookworm AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -36,7 +36,7 @@ RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/fir
 
 ##### PRODUCTION BUILD #############
 
-FROM debian:trixie-slim
+FROM debian:bookworm-slim
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
       org.opencontainers.image.url="https://meshtastic.org" \
@@ -51,8 +51,8 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7t64 libssl3t64 \
+        liborcania2.3 libulfius2.7 libssl3 \
         libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
@@ -61,7 +61,7 @@ RUN apt-get update && apt-get --no-install-recommends -y install \
 
 # Fetch compiled binary from the builder
 COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/web/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 

arch/esp32/esp32.ini

@@ -54,8 +54,8 @@ lib_deps =
   h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
+  lewisxhe/XPowersLib@0.3.0
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -23,7 +23,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/c490bcd019e0658404088a61b96e653c9da22c45.zip
+  https://github.com/meshtastic/platform-native/archive/6cb7a455b440dd0738e8ed74a18136ed5cf7ea63.zip
 framework = arduino
 
 build_src_filter = 
@@ -17,6 +17,7 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
+  +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
@@ -31,17 +32,15 @@ lib_deps =
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
-  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
-  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 build_flags =
   ${arduino_base.build_flags}
-  -D ARCH_PORTDUINO
   -fPIC
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -DHAS_UDP_MULTICAST=1
+  -DNXP_WIRE=Wire
+  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.3.0
+  platformio/ststm32@19.2.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
@@ -23,20 +23,14 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN=1
   -DMESHTASTIC_EXCLUDE_MQTT=1
   -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_GPS=1
   -DMESHTASTIC_EXCLUDE_WIFI=1
   -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
-  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
-  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
   -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
-  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
+  ;-DDEBUG_MUTE
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_LR11X0=1
-  -DHAL_DAC_MODULE_ONLY
-  -DHAL_RNG_MODULE_ENABLED
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
@@ -50,7 +44,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
 
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
+  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
   OneButton

bin/build-firmware.sh

@@ -1,5 +1,7 @@
 #!/usr/bin/env bash
 
+sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
 export PIP_BREAK_SYSTEM_PACKAGES=1
 
 if (echo $2 | grep -q "esp32"); then
@@ -9,7 +11,7 @@ elif (echo $2 | grep -q "nrf52"); then
 elif (echo $2 | grep -q "stm32"); then
   bin/build-stm32.sh $1
 elif (echo $2 | grep -q "rpi2040"); then
-  bin/build-rp2xx0.sh $1
+  bin/build-rpi2040.sh $1
 else
   echo "Unknown target $2"
   exit 1

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -1,8 +0,0 @@
-Lora:
-  ### RAK13300in Slot 2 pins
-  IRQ: 18 #IO6
-  Reset: 24 # IO4
-  Busy: 19 # IO5
-  # Ant_sw: 23 # IO3 
-  spidev: spidev0.1
-  # CS: 7

bin/config.d/lora-RAK6421.yaml

@@ -9,4 +9,13 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
-  # CS: 8
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/device-install.bat

@@ -7,7 +7,6 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
-SET "MUIDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
@@ -15,12 +14,11 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
 
 GOTO getopts
 :help
@@ -102,6 +100,7 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
@@ -121,10 +120,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% EQU 9009 (
+IF %ERRORLEVEL% GEQ 2 (
-    @REM 9009 = command not found on Windows
+    @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -142,7 +142,7 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %BPS_RESET% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL 1200 --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
@@ -164,15 +164,6 @@ FOR %%a IN (%BIGDB_8MB%) DO (
 )
 :end_loop_bigdb_8mb
 
-FOR %%a IN (%MUIDB_8MB%) DO (
-    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %MUIDB_8MB%.
-        SET "MUIDB8=1"
-        GOTO end_loop_muidb_8mb
-    )
-)
-:end_loop_muidb_8mb
-
 FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %BIGDB_16MB%.
@@ -183,7 +174,6 @@ FOR %%a IN (%BIGDB_16MB%) DO (
 :end_loop_bigdb_16mb
 
 IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
-IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
 IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
@@ -228,12 +218,6 @@ IF %BIGDB8% EQU 1 (
     SET "SPIFFS_OFFSET=0x670000"
 )
 
-@REM Offsets for MUIDB 8mb.
-IF %MUIDB8% EQU 1 (
-    SET "OTA_OFFSET=0x5D0000"
-    SET "SPIFFS_OFFSET=0x670000"
-)
-
 @REM Offsets for BigDB 16mb.
 IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"

bin/device-install.sh

@@ -1,47 +1,42 @@
-#!/usr/bin/env bash
+#!/bin/bash
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
-# Constants
-RESET_BAUD=1200
-FIRMWARE_OFFSET=0x00
-
 # Variant groups
 BIGDB_8MB=(
-    "crowpanel-esp32s3"
+	"picomputer-s3"
-    "heltec_capsule_sensor_v3"
+	"unphone"
-    "heltec-v3"
+	"seeed-sensecap-indicator"
-    "heltec-vision-master-e213"
+	"crowpanel-esp32s3"
-    "heltec-vision-master-e290"
+	"heltec_capsule_sensor_v3"
-    "heltec-vision-master-t190"
+	"heltec-v3"
-    "heltec-wireless-paper"
+	"heltec-vision-master-e213"
-    "heltec-wireless-tracker"
+	"heltec-vision-master-e290"
-    "heltec-wsl-v3"
+	"heltec-vision-master-t190"
-    "icarus"
+	"heltec-wireless-paper"
-    "seeed-xiao-s3"
+	"heltec-wireless-tracker"
-    "tbeam-s3-core"
+	"heltec-wsl-v3"
-    "tracksenger"
+	"icarus"
-)
+	"seeed-xiao-s3"
-MUIDB_8MB=(
+	"tbeam-s3-core"
-    "picomputer-s3"
+	"tracksenger"
-    "unphone"
-    "seeed-sensecap-indicator"
 )
 BIGDB_16MB=(
-    "t-deck"
+	"t-deck"
-    "mesh-tab"
+	"mesh-tab"
-    "t-energy-s3"
+	"t-energy-s3"
-    "dreamcatcher"
+	"dreamcatcher"
-    "ESP32-S3-Pico"
+	"ESP32-S3-Pico"
-    "m5stack-cores3"
+	"m5stack-cores3"
-    "station-g2"
+	"station-g2"
     "t-eth-elite"
-    "tlora-pager"
     "t-watch-s3"
-    "elecrow-adv"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
 )
 S3_VARIANTS=(
     "s3"
@@ -52,7 +47,6 @@ S3_VARIANTS=(
     "station-g2"
     "unphone"
     "t-eth-elite"
-    "tlora-pager"
     "mesh-tab"
     "dreamcatcher"
     "ESP32-S3-Pico"
@@ -112,8 +106,8 @@ while [ $# -gt 0 ]; do
         shift
         ;;
     --1200bps-reset)
-        BPS_RESET=true
+		    BPS_RESET=true
-        ;;
+		    ;;
     --) # Stop parsing options
         shift
         break
@@ -127,7 +121,7 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
 	exit 0
 fi
 
@@ -164,13 +158,6 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         fi
     done
 
-    for variant in "${MUIDB_8MB[@]}"; do
-        if [ -z "${FILENAME##*"$variant"*}" ]; then
-            OFFSET=0x670000
-            OTA_OFFSET=0x5D0000
-        fi
-    done
-
     # littlefs* offset for BigDB 16mb and OTA OFFSET.
     for variant in "${BIGDB_16MB[@]}"; do
         if [ -z "${FILENAME##*"$variant"*}" ]; then
@@ -214,8 +201,8 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase-flash
+    $ESPTOOL_CMD erase_flash
-    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
     $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"

bin/device-update.bat

@@ -6,8 +6,6 @@ SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
-SET "RESET_BAUD=1200"
-SET "UPDATE_OFFSET=0x10000"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "CHANGE_MODE=0"
@@ -87,13 +85,14 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=""!PYTHON!"" -m esptool"
+    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -106,11 +105,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-CALL :LOG_MESSAGE DEBUG "esptool exit code: %ERRORLEVEL%"
+IF %ERRORLEVEL% GEQ 2 (
-IF %ERRORLEVEL% EQU 9009 (
+    @REM esptool exits with code 1 if help is displayed.
-    @REM 9009 = command not found on Windows
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
+    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -128,13 +127,13 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %CHANGE_MODE% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !RESET_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
 @REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET !UPDATE_OFFSET!..."
+CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !UPDATE_OFFSET! "!FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -146,9 +145,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase-flash|write-flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-update.sh

@@ -1,13 +1,8 @@
-#!/usr/bin/env bash
+#!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
 
-# Constants
-FLASH_BAUD=115200
-RESET_BAUD=1200
-UPDATE_OFFSET=0x10000
-
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
     ESPTOOL_CMD="$PYTHON -m esptool"
@@ -69,7 +64,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
     exit 0
 fi
 
@@ -80,7 +75,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -2,71 +2,50 @@
 
 """Generate the CI matrix."""
 
+import configparser
 import json
+import os
 import sys
 import random
-import re
+
-from platformio.project.config import ProjectConfig
+rootdir = "variants/"
 
 options = sys.argv[1:]
 
 outlist = []
 
 if len(options) < 1:
-  print(json.dumps(outlist))
+    print(json.dumps(outlist))
-  exit(1)
+    exit()
 
-cfg = ProjectConfig.get_instance()
+for subdir, dirs, files in os.walk(rootdir):
-pio_envs = cfg.envs()
+    for file in files:
-
+        if file == "platformio.ini":
-# Gather all PlatformIO environments for filtering later
+            config = configparser.ConfigParser()
-all_envs = []
+            config.read(subdir + "/" + file)
-for pio_env in pio_envs:
+            for c in config.sections():
-  env_build_flags = cfg.get(f"env:{pio_env}", 'build_flags')
+                if c.startswith("env:"):
-  env_platform = None
+                    section = config[c].name[4:]
-  for flag in env_build_flags:
+                    if "extends" in config[config[c].name]:
-    # Extract the platform from the build flags
+                        if options[0] + "_base" in config[config[c].name]["extends"]:
-    # Example flag: -I variants/esp32s3/heltec-v3
+                            if "board_level" in config[config[c].name]:
-    match = re.search(r"-I\s?variants/([^/]+)", flag)
+                                if (
-    if match:
+                                    config[config[c].name]["board_level"] == "extra"
-      env_platform = match.group(1)
+                                ) & ("extra" in options):
-      break
+                                    outlist.append(section)
-  # Intentionally fail if platform cannot be determined
+                            else:
-  if not env_platform:
+                                outlist.append(section)
-    print(f"Error: Could not determine platform for environment '{pio_env}'")
+                        # Add the TFT variants if the base variant is selected
-    exit(1)
+                        elif section.replace("-tft", "") in outlist and config[config[c].name].get("board_level") != "extra":
-  # Store env details as a dictionary, and add to 'all_envs' list
+                            outlist.append(section)
-  env = {
+                        elif section.replace("-inkhud", "") in outlist and config[config[c].name].get("board_level") != "extra":
-    'name': pio_env,
+                            outlist.append(section)
-    'platform': env_platform,
+                    if "board_check" in config[config[c].name]:
-    'board_level': cfg.get(f"env:{pio_env}", 'board_level', default=None),
+                        if (config[config[c].name]["board_check"] == "true") & (
-    'board_check': bool(cfg.get(f"env:{pio_env}", 'board_check', default=False))
+                            "check" in options
-  }
+                        ):
-  all_envs.append(env)
+                            outlist.append(section)
-
+if ("quick" in options) & (len(outlist) > 3):
-# Filter outputs based on options
+    print(json.dumps(random.sample(outlist, 3)))
-# Check is mutually exclusive with other options (except 'pr')
-if "check" in options:
-  for env in all_envs:
-    if env['board_check']:
-      if "pr" in options:
-        if env['board_level'] == 'pr':
-          outlist.append(env['name'])
-      else:
-        outlist.append(env['name'])
-# Filter (non-check) builds by platform
 else:
-  for env in all_envs:
+    print(json.dumps(outlist))
-    if options[0] == env['platform']:
-      # Always include board_level = 'pr'
-      if env['board_level'] == 'pr':
-        outlist.append(env['name'])
-      # Include board_level = 'extra' when requested
-      elif "extra" in options and env['board_level'] == "extra":
-        outlist.append(env['name'])
-      # If no board level is specified, include in release builds (not PR)
-      elif "pr" not in options and not env['board_level']:
-        outlist.append(env['name'])
-
-# Return as a JSON list
-print(json.dumps(outlist))

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,27 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.10" date="2025-09-18">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.10</url>
-    </release>
-    <release version="2.7.9" date="2025-09-03">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.9</url>
-    </release>
-    <release version="2.7.8" date="2025-08-30">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
-    </release>
-    <release version="2.7.7" date="2025-08-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
-    </release>
-    <release version="2.7.6" date="2025-08-12">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
-    </release>
-    <release version="2.7.5" date="2025-08-09">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.5</url>
-    </release>
-    <release version="2.7.4" date="2025-07-19">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.4</url>
-    </release>
     <release version="2.7.3" date="2025-07-10">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.3</url>
     </release>

bin/platformio-custom.py

@@ -3,11 +3,8 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
-import subprocess
 import json
 import re
-import time
-from datetime import datetime
 
 from readprops import readProps
 
@@ -95,17 +92,6 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
-# get repository owner if git is installed
-try:
-    r_owner = (
-        subprocess.check_output(["git", "config", "--get", "remote.origin.url"])
-        .decode("utf-8")
-        .strip().split("/")
-    )
-    repo_owner = r_owner[-2] + "/" + r_owner[-1].replace(".git", "")
-except subprocess.CalledProcessError:
-    repo_owner = "unknown"
-
 jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
 with open(jsonLoc) as f:
     jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
@@ -127,16 +113,10 @@ for pref in userPrefs:
         pref_flags.append("-D" + pref + "=" + env.StringifyMacro(userPrefs[pref]) + "")
 
 # General options that are passed to the C and C++ compilers
-# Calculate unix epoch for current day (midnight)
-current_date = datetime.now().replace(hour=0, minute=0, second=0, microsecond=0)
-build_epoch = int(current_date.timestamp())
-
 flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
-        "-DAPP_REPO=" + repo_owner,
-        "-DBUILD_EPOCH=" + str(build_epoch),
     ] + pref_flags
 
 print ("Using flags:")

boards/heltec_mesh_solar.json

@@ -1,54 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x0071"]
-    ],
-    "usb_product": "HT-n5262",
-    "mcu": "nrf52840",
-    "variant": "heltec_mesh_solar",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Heltec nrf (Adafruit BSP)",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://heltec.org/project/meshsolar/",
-  "vendor": "Heltec"
-}

boards/heltec_v4.json

@@ -1,43 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_16MB.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "psram_type": "qspi",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "heltec_v4"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "heltec_wifi_lora_32 v4 (16 MB FLASH, 2 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 2097152,
-    "maximum_size": 16777216,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://heltec.org/",
-  "vendor": "heltec"
-}

boards/meshtiny.json

@@ -1,52 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "MeshTiny",
-    "mcu": "nrf52840",
-    "variant": "meshtiny",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino", "freertos"],
-  "name": "MeshTiny",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://github.com/meshtastic/firmware",
-  "vendor": "MTools Tec"
-}

boards/seeed-sensecap-indicator.json

@@ -2,7 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "partition-table-8MB.csv",
+      "partitions": "default_8MB.csv",
       "memory_type": "qio_opi"
     },
     "core": "esp32",

boards/t-deck-pro.json

@@ -1,43 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_qspi",
-      "partitions": "default_16MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "LilyGo T-Deck Pro S3 (16M Flash 8M QSPI PSRAM )",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "monitor": {
-    "speed": 115200
-  },
-  "url": "https://lilygo.cc/products/t-deck-pro",
-  "vendor": "LilyGo"
-}

boards/unphone.json

@@ -3,7 +3,7 @@
     "arduino": {
       "ldscript": "esp32s3_out.ld",
       "memory_type": "qio_opi",
-      "partitions": "partition-table-8MB.csv"
+      "partitions": "default_8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [

boards/wiscore_rak3172.json

@@ -5,7 +5,7 @@
     },
     "core": "stm32",
     "cpu": "cortex-m4",
-    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_RAK3172_MODULE",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
     "f_cpu": "48000000L",
     "mcu": "stm32wle5ccu",
     "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",

debian/changelog

@@ -1,7 +1,11 @@
-meshtasticd (2.7.10.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.3.0) UNRELEASED; urgency=medium
 
+  [ Austin Lane ]
   * Initial packaging
-  * Version 2.5.19
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
 
   [  ]
   * GitHub Actions Automatic version bump
@@ -27,23 +31,4 @@ meshtasticd (2.7.10.0) UNRELEASED; urgency=medium
   [ Ubuntu ]
   * GitHub Actions Automatic version bump
 
-  [  ]
+ -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 10 Jul 2025 16:29:27 +0000
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
-  [  ]
-  * GitHub Actions Automatic version bump
-
- --  <github-actions[bot]@users.noreply.github.com>  Thu, 18 Sep 2025 22:11:37 +0000

debian/ci_changelog.sh

@@ -1,8 +1,7 @@
 #!/usr/bin/bash
-export DEBFULLNAME="GitHub Actions"
 export DEBEMAIL="github-actions[bot]@users.noreply.github.com"
 PKG_VERSION=$(python3 bin/buildinfo.py short)
 
 dch --newversion "$PKG_VERSION.0" \
-	--distribution unstable \
+	--distribution UNRELEASED \
-	"Version $PKG_VERSION"
+	"GitHub Actions Automatic version bump"

partition-table-8MB.csv

@@ -1,7 +0,0 @@
-# This is a layout for 8MB of flash for MUI devices
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x5C0000,
-flashApp, app,  ota_1,   0x5D0000,0x0A0000,
-spiffs,   data, spiffs,  0x670000,0x180000

platformio.ini

@@ -6,8 +6,7 @@ default_envs = tbeam
 
 extra_configs =
 	arch/*/*.ini
-	variants/*/*/platformio.ini
+	variants/*/platformio.ini
-	variants/*/diy/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
 
 description = Meshtastic
@@ -53,17 +52,16 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
 	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
 	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
-	#-DBUILD_EPOCH=$UNIX_TIME ; set in platformio-custom.py now
+	#-DBUILD_EPOCH=$UNIX_TIME
 	#-D OLED_PL=1
-	#-D DEBUG_HEAP=1 ; uncomment to add free heap space / memory leak debugging logs
 
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
-	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
+	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
-	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
+	mathertel/OneButton@2.6.1
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
 	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
@@ -74,6 +72,8 @@ lib_deps =
 	nanopb/Nanopb@0.4.91
 	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
 	erriez/ErriezCRC32@1.0.1
+	https://github.com/meshtastic/SE05X#031f8feccae62689ebbd06914b44bd88547535af
+
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
@@ -103,29 +103,21 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
-; Minimal networking libs for nrf52 (excludes Syslog to save flash)
-[nrf52_networking_base]
-lib_deps =
-	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
-	thingsboard/TBPubSubClient@2.12.1
-	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
-	arduino-libraries/NTPClient@3.2.1
-
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.3.0
+	jgromes/RadioLib@7.2.1
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/9ed5355a24059750e9b2eb5d669574d9ea42a37b.zip
+	https://github.com/meshtastic/device-ui/archive/86a09a7360f92d10053fbbf8d74f67f85b0ceb09.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.3
+	adafruit/Adafruit BusIO@1.17.2
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
@@ -158,8 +150,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
+	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
-	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
+	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
@@ -178,8 +170,6 @@ lib_deps =
 	adafruit/Adafruit PCT2075@1.0.5
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
-	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
-	adafruit/Adafruit TSL2561@1.1.2
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -189,7 +179,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
 	adafruit/Adafruit MAX1704X@1.0.3
 	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
-	adafruit/Adafruit SHTC3 Library@1.0.2
+	adafruit/Adafruit SHTC3 Library@1.0.1
 	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
 	adafruit/Adafruit LPS2X@2.0.6
 	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library

renovate.json

@@ -8,7 +8,6 @@
     "replacements:all",
     "workarounds:all"
   ],
-  "baseBranchPatterns": ["master"],
   "forkProcessing": "enabled",
   "ignoreDeps": [
     "protobufs"

src/AmbientLightingThread.h

@@ -183,9 +183,9 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
 #endif
             pixels.show();
-            // LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+            LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-            //        moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
-            //        moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
             analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);

src/BluetoothStatus.h

@@ -89,22 +89,14 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, LOW);
-#else
                 digitalWrite(BLE_LED, HIGH);
-#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
-#ifdef BLE_LED_INVERTED
-                digitalWrite(BLE_LED, HIGH);
-#else
                 digitalWrite(BLE_LED, LOW);
-#endif
 #endif
                 break;
             }

src/DebugConfiguration.cpp

@@ -146,7 +146,7 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
 {
     int result;
 #ifdef ARCH_PORTDUINO
-    bool utf = !portduino_config.ascii_logs;
+    bool utf = !settingsMap[ascii_logs];
 #else
     bool utf = true;
 #endif

src/DebugConfiguration.h

@@ -2,12 +2,6 @@
 
 #include "configuration.h"
 
-// Forward declarations
-#if defined(DEBUG_HEAP)
-class MemGet;
-extern MemGet memGet;
-#endif
-
 // DEBUG LED
 #ifndef LED_STATE_ON
 #define LED_STATE_ON 1
@@ -29,7 +23,6 @@ extern MemGet memGet;
 #define MESHTASTIC_LOG_LEVEL_ERROR "ERROR"
 #define MESHTASTIC_LOG_LEVEL_CRIT "CRIT "
 #define MESHTASTIC_LOG_LEVEL_TRACE "TRACE"
-#define MESHTASTIC_LOG_LEVEL_HEAP "HEAP"
 
 #include "SerialConsole.h"
 
@@ -69,25 +62,6 @@ extern MemGet memGet;
 #endif
 #endif
 
-#if defined(DEBUG_HEAP)
-#define LOG_HEAP(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_HEAP, __VA_ARGS__)
-
-// Macro-based heap debugging
-#define DEBUG_HEAP_BEFORE auto heapBefore = memGet.getFreeHeap();
-#define DEBUG_HEAP_AFTER(context, ptr)                                                                                           \
-    do {                                                                                                                         \
-        auto heapAfter = memGet.getFreeHeap();                                                                                   \
-        if (heapBefore != heapAfter) {                                                                                           \
-            LOG_HEAP("Alloc in %s pointer 0x%x, size: %u, free: %u", context, ptr, heapBefore - heapAfter, heapAfter);           \
-        }                                                                                                                        \
-    } while (0)
-
-#else
-#define LOG_HEAP(...)
-#define DEBUG_HEAP_BEFORE
-#define DEBUG_HEAP_AFTER(context, ptr)
-#endif
-
 /// A C wrapper for LOG_DEBUG that can be used from arduino C libs that don't know about C++ or meshtastic
 extern "C" void logLegacy(const char *level, const char *fmt, ...);
 

src/DisplayFormatters.cpp

@@ -1,14 +1,7 @@
 #include "DisplayFormatters.h"
 
-const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
-                                                         bool usePreset)
 {
-
-    // If use_preset is false, always return "Custom"
-    if (!usePreset) {
-        return "Custom";
-    }
-
     switch (preset) {
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
         return useShortName ? "ShortT" : "ShortTurbo";
@@ -38,49 +31,4 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
         return useShortName ? "Custom" : "Invalid";
         break;
     }
-}
-
-const char *DisplayFormatters::getDeviceRole(meshtastic_Config_DeviceConfig_Role role)
-{
-    switch (role) {
-    case meshtastic_Config_DeviceConfig_Role_CLIENT:
-        return "Client";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE:
-        return "Client Mute";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_CLIENT_HIDDEN:
-        return "Client Hidden";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_CLIENT_BASE:
-        return "Client Base";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_LOST_AND_FOUND:
-        return "Lost and Found";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_TRACKER:
-        return "Tracker";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_SENSOR:
-        return "Sensor";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_TAK:
-        return "TAK";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_TAK_TRACKER:
-        return "TAK Tracker";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_ROUTER:
-        return "Router";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_ROUTER_LATE:
-        return "Router Late";
-        break;
-    case meshtastic_Config_DeviceConfig_Role_REPEATER:
-        return "Repeater";
-        break;
-    default:
-        return "Unknown";
-        break;
-    }
 }

src/DisplayFormatters.h

@@ -4,7 +4,5 @@
 class DisplayFormatters
 {
   public:
-    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
-                                                 bool usePreset);
-    static const char *getDeviceRole(meshtastic_Config_DeviceConfig_Role role);
 };

src/GPSStatus.h

@@ -22,9 +22,6 @@ class GPSStatus : public Status
 
     meshtastic_Position p = meshtastic_Position_init_default;
 
-    /// Time of last valid GPS fix (millis since boot)
-    uint32_t lastFixMillis = 0;
-
   public:
     GPSStatus() { statusType = STATUS_TYPE_GPS; }
 
@@ -86,9 +83,6 @@ class GPSStatus : public Status
 
     uint32_t getNumSatellites() const { return p.sats_in_view; }
 
-    /// Return millis() when the last GPS fix occurred (0 = never)
-    uint32_t getLastFixMillis() const { return lastFixMillis; }
-
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_DEBUG
@@ -120,9 +114,6 @@ class GPSStatus : public Status
 
         if (isDirty) {
             if (hasLock) {
-                // Record time of last valid GPS fix
-                lastFixMillis = millis();
-
                 // In debug logs, identify position by @timestamp:stage (stage 3 = notify)
                 LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,

src/Power.cpp

@@ -20,11 +20,6 @@
 #include "meshUtils.h"
 #include "sleep.h"
 
-#if defined(ARCH_PORTDUINO)
-#include "api/WiFiServerAPI.h"
-#include "input/LinuxInputImpl.h"
-#endif
-
 // Working USB detection for powered/charging states on the RAK platform
 #ifdef NRF_APM
 #include "nrfx_power.h"
@@ -125,16 +120,6 @@ NullSensor max17048Sensor;
 RAK9154Sensor rak9154Sensor;
 #endif
 
-#ifdef HAS_PPM
-// note: XPOWERS_CHIP_XXX must be defined in variant.h
-#include <XPowersLib.h>
-XPowersPPM *PPM = NULL;
-#endif
-
-#ifdef HAS_BQ27220
-#include "bq27220.h"
-#endif
-
 #ifdef HAS_PMU
 XPowersLibInterface *PMU = NULL;
 #else
@@ -680,10 +665,6 @@ bool Power::setup()
         found = true;
     } else if (lipoInit()) {
         found = true;
-    } else if (lipoChargerInit()) {
-        found = true;
-    } else if (meshSolarInit()) {
-        found = true;
     } else if (analogInit()) {
         found = true;
     }
@@ -698,65 +679,9 @@ bool Power::setup()
     return found;
 }
 
-void Power::powerCommandsCheck()
-{
-    if (rebootAtMsec && millis() > rebootAtMsec) {
-        LOG_INFO("Rebooting");
-        reboot();
-    }
-
-    if (shutdownAtMsec && millis() > shutdownAtMsec) {
-        shutdownAtMsec = 0;
-        shutdown();
-    }
-}
-
-void Power::reboot()
-{
-    notifyReboot.notifyObservers(NULL);
-#if defined(ARCH_ESP32)
-    ESP.restart();
-#elif defined(ARCH_NRF52)
-    NVIC_SystemReset();
-#elif defined(ARCH_RP2040)
-    rp2040.reboot();
-#elif defined(ARCH_PORTDUINO)
-    deInitApiServer();
-    if (aLinuxInputImpl)
-        aLinuxInputImpl->deInit();
-    SPI.end();
-    Wire.end();
-    Serial1.end();
-    if (screen) {
-        delete screen;
-        screen = nullptr;
-    }
-    LOG_DEBUG("final reboot!");
-    ::reboot();
-#elif defined(ARCH_STM32WL)
-    HAL_NVIC_SystemReset();
-#else
-    rebootAtMsec = -1;
-    LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
-#endif
-}
-
 void Power::shutdown()
 {
-
+    LOG_INFO("Shutting Down");
-#if HAS_SCREEN
-    if (screen) {
-#ifdef T_DECK_PRO
-        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#else
-        screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
-#endif
-    }
-#endif
-#if !defined(ARCH_STM32WL)
-    playShutdownMelody();
-#endif
-    nodeDB->saveToDisk();
 
 #if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
 #ifdef PIN_LED1
@@ -768,11 +693,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, true, true);
+    doDeepSleep(DELAY_FOREVER, false, false);
-#elif defined(ARCH_PORTDUINO)
-    exit(EXIT_SUCCESS);
-#else
-    LOG_WARN("FIXME implement shutdown for this platform");
 #endif
 }
 
@@ -833,27 +754,18 @@ void Power::readPowerStatus()
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        // Use stack-allocated buffer to avoid heap allocations in monitoring code
+        std::string threadlist = "Threads running:";
-        char threadlist[256] = "Threads running:";
-        int threadlistLen = strlen(threadlist);
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                // Use snprintf to safely append to stack buffer without heap allocation
+                threadlist += vformat(" %s", thread->ThreadName.c_str());
-                int remaining = sizeof(threadlist) - threadlistLen - 1;
-                if (remaining > 0) {
-                    int written = snprintf(threadlist + threadlistLen, remaining, " %s", thread->ThreadName.c_str());
-                    if (written > 0 && written < remaining) {
-                        threadlistLen += written;
-                    }
-                }
                 running++;
             }
         }
-        LOG_HEAP(threadlist);
+        LOG_DEBUG(threadlist.c_str());
-        LOG_HEAP("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
-                 memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
+                  memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
     }
 #ifdef DEBUG_HEAP_MQTT
@@ -865,19 +777,15 @@ void Power::readPowerStatus()
         sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
         auto newHeap = memGet.getFreeHeap();
-        // Use stack-allocated buffers to avoid heap allocations in monitoring code
+        std::string heapTopic =
-        char heapTopic[128];
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
-        snprintf(heapTopic, sizeof(heapTopic), "%s/2/heap/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
+        std::string heapString = std::to_string(newHeap);
-        char heapString[16];
+        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
-        snprintf(heapString, sizeof(heapString), "%u", newHeap);
-        mqtt->pubSub.publish(heapTopic, heapString, false);
-
         auto wifiRSSI = WiFi.RSSI();
-        char wifiTopic[128];
+        std::string wifiTopic =
-        snprintf(wifiTopic, sizeof(wifiTopic), "%s/2/wifi/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
-        char wifiString[16];
+        std::string wifiString = std::to_string(wifiRSSI);
-        snprintf(wifiString, sizeof(wifiString), "%d", wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
-        mqtt->pubSub.publish(wifiTopic, wifiString, false);
     }
 #endif
 
@@ -1329,213 +1237,3 @@ bool Power::lipoInit()
     return false;
 }
 #endif
-
-#if defined(HAS_PPM) && HAS_PPM
-
-/**
- * Adapter class for BQ25896/BQ27220 Lipo battery charger.
- */
-class LipoCharger : public HasBatteryLevel
-{
-  private:
-    BQ27220 *bq = nullptr;
-
-  public:
-    /**
-     * Init the I2C BQ25896 Lipo battery charger
-     */
-    bool runOnce()
-    {
-        if (PPM == nullptr) {
-            PPM = new XPowersPPM;
-            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
-            if (result) {
-                LOG_INFO("PPM BQ25896 init succeeded");
-                // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // PPM->setSysPowerDownVoltage(3100);
-
-                // Set input current limit, default is 500mA
-                // PPM->setInputCurrentLimit(800);
-
-                // Disable current limit pin
-                // PPM->disableCurrentLimitPin();
-
-                // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                PPM->setChargeTargetVoltage(4288);
-
-                // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // PPM->setPrechargeCurr(64);
-
-                // The premise is that limit pin is disabled, or it will
-                // only follow the maximum charging current set by limit pin.
-                // Set the charging current , Range:0~5056mA ,step:64mA
-                PPM->setChargerConstantCurr(1024);
-
-                // To obtain voltage data, the ADC must be enabled first
-                PPM->enableMeasure();
-
-                // Turn on charging function
-                // If there is no battery connected, do not turn on the charging function
-                PPM->enableCharge();
-            } else {
-                LOG_WARN("PPM BQ25896 init failed");
-                delete PPM;
-                PPM = nullptr;
-                return false;
-            }
-        }
-        if (bq == nullptr) {
-            bq = new BQ27220;
-            bq->setDefaultCapacity(BQ27220_DESIGN_CAPACITY);
-
-            bool result = bq->init();
-            if (result) {
-                LOG_DEBUG("BQ27220 design capacity: %d", bq->getDesignCapacity());
-                LOG_DEBUG("BQ27220 fullCharge capacity: %d", bq->getFullChargeCapacity());
-                LOG_DEBUG("BQ27220 remaining capacity: %d", bq->getRemainingCapacity());
-                return true;
-            } else {
-                LOG_WARN("BQ27220 init failed");
-                delete bq;
-                bq = nullptr;
-                return false;
-            }
-        }
-        return false;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override
-    {
-        return -1;
-        // return bq->getChargePercent(); // don't use BQ27220 for battery percent, it is not calibrated
-    }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return bq->getVoltage(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override
-    {
-        bool isCharging = PPM->isCharging();
-        if (isCharging) {
-            LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
-        } else {
-            if (!PPM->isVbusIn()) {
-                LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
-            }
-        }
-        return isCharging;
-    }
-};
-
-LipoCharger lipoCharger;
-
-/**
- * Init the Lipo battery charger
- */
-bool Power::lipoChargerInit()
-{
-    bool result = lipoCharger.runOnce();
-    LOG_DEBUG("Power::lipoChargerInit lipo sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &lipoCharger;
-    return true;
-}
-
-#else
-/**
- * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::lipoChargerInit()
-{
-    return false;
-}
-#endif
-
-#ifdef HELTEC_MESH_SOLAR
-#include "meshSolarApp.h"
-
-/**
- * meshSolar class for an SMBUS battery sensor.
- */
-class meshSolarBatteryLevel : public HasBatteryLevel
-{
-
-  public:
-    /**
-     * Init the I2C meshSolar battery level sensor
-     */
-    bool runOnce()
-    {
-        meshSolarStart();
-        return true;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return meshSolarGetBatteryPercent(); }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return meshSolarGetBattVoltage(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return meshSolarIsBatteryConnect(); }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override { return meshSolarIsCharging(); }
-};
-
-meshSolarBatteryLevel meshSolarLevel;
-
-/**
- * Init the meshSolar battery level sensor
- */
-bool Power::meshSolarInit()
-{
-    bool result = meshSolarLevel.runOnce();
-    LOG_DEBUG("Power::meshSolarInit mesh solar sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &meshSolarLevel;
-    return true;
-}
-
-#else
-/**
- * The meshSolar battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::meshSolarInit()
-{
-    return false;
-}
-#endif

src/PowerFSM.cpp

@@ -72,7 +72,7 @@ extern Power *power;
 static void shutdownEnter()
 {
     LOG_DEBUG("State: SHUTDOWN");
-    shutdownAtMsec = millis();
+    power->shutdown();
 }
 
 #include "error.h"

src/RedirectablePrint.cpp

@@ -4,7 +4,6 @@
 #include "concurrency/OSThread.h"
 #include "configuration.h"
 #include "main.h"
-#include "memGet.h"
 #include "mesh/generated/meshtastic/mesh.pb.h"
 #include <assert.h>
 #include <cstring>
@@ -58,7 +57,7 @@ size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_l
 #endif
 
 #ifdef ARCH_PORTDUINO
-    bool color = !portduino_config.ascii_logs;
+    bool color = !settingsMap[ascii_logs];
 #else
     bool color = true;
 #endif
@@ -100,7 +99,7 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
     size_t r = 0;
 
 #ifdef ARCH_PORTDUINO
-    bool color = !portduino_config.ascii_logs;
+    bool color = !settingsMap[ascii_logs];
 #else
     bool color = true;
 #endif
@@ -167,16 +166,6 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
         print(thread->ThreadName);
         print("] ");
     }
-
-#ifdef DEBUG_HEAP
-    // Add heap free space bytes prefix before every log message
-#ifdef ARCH_PORTDUINO
-    ::printf("[heap %u] ", memGet.getFreeHeap());
-#else
-    printf("[heap %u] ", memGet.getFreeHeap());
-#endif
-#endif // DEBUG_HEAP
-
     r += vprintf(logLevel, format, arg);
 }
 
@@ -299,7 +288,7 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #if ARCH_PORTDUINO
     // level trace is special, two possible ways to handle it.
     if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
-        if (portduino_config.traceFilename != "") {
+        if (settingsStrings[traceFilename] != "") {
             va_list arg;
             va_start(arg, format);
             try {
@@ -308,18 +297,18 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
             }
             va_end(arg);
         }
-        if (portduino_config.logoutputlevel < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
+        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
             delete[] newFormat;
             return;
         }
     }
-    if (portduino_config.logoutputlevel < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
+    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
         delete[] newFormat;
         return;
-    } else if (portduino_config.logoutputlevel < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
+    } else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
         delete[] newFormat;
         return;
-    } else if (portduino_config.logoutputlevel < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
+    } else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
         delete[] newFormat;
         return;
     }

src/SerialConsole.cpp

@@ -64,14 +64,6 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
 
 int32_t SerialConsole::runOnce()
 {
-#ifdef HELTEC_MESH_SOLAR
-    //After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
-    if(moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port
-        && moduleConfig.serial.mode==meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG)
-    {
-        return 250;
-    }
-#endif
     return runOncePart();
 }
 

src/buzz/BuzzerFeedbackThread.cpp

@@ -28,14 +28,11 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
     case INPUT_BROKER_USER_PRESS:
     case INPUT_BROKER_ALT_PRESS:
     case INPUT_BROKER_SELECT:
-    case INPUT_BROKER_SELECT_LONG:
         playBeep(); // Confirmation feedback
         break;
 
     case INPUT_BROKER_UP:
-    case INPUT_BROKER_UP_LONG:
     case INPUT_BROKER_DOWN:
-    case INPUT_BROKER_DOWN_LONG:
     case INPUT_BROKER_LEFT:
     case INPUT_BROKER_RIGHT:
         playChirp(); // Navigation feedback
@@ -50,6 +47,10 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
         playComboTune(); // Ping sent feedback
         break;
 
+    case INPUT_BROKER_SHUTDOWN:
+        playShutdownMelody(); // Shutdown feedback
+        break;
+
     default:
         // For other events, check if it's a printable character
         if (event->kbchar >= 32 && event->kbchar <= 126) {
@@ -68,7 +69,10 @@ int32_t BuzzerFeedbackThread::runOnce()
     // This thread is primarily event-driven, but we can use runOnce
     // for any periodic tasks if needed in the future
 
-    needsUpdate = false;
+    if (needsUpdate) {
+        needsUpdate = false;
+        // Could add any periodic processing here
+    }
 
     // Run every 100ms when active, less frequently when idle
     return needsUpdate ? 100 : 1000;

src/buzz/buzz.cpp

@@ -140,10 +140,6 @@ bool playNextLeadUpNote()
     playTones(&note, 1); // Play single note using existing playTones function
 
     leadUpNoteIndex++;
-
-    if (leadUpNoteIndex >= leadUpNotesCount) {
-        return false; // this was the final note
-    }
     return true; // Note was played (playTones handles buzzer availability internally)
 }
 

src/concurrency/OSThread.cpp

@@ -86,9 +86,9 @@ void OSThread::run()
 #ifdef DEBUG_HEAP
     auto newHeap = memGet.getFreeHeap();
     if (newHeap < heap)
-        LOG_HEAP("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_DEBUG("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
     if (heap < newHeap)
-        LOG_HEAP("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_DEBUG("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
 #endif
 
     runned();

src/configuration.h

@@ -26,10 +26,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#if __has_include("Melopero_RV3028.h")
+#ifdef RV3028_RTC
 #include "Melopero_RV3028.h"
 #endif
-#if __has_include("pcf8563.h")
+#ifdef PCF8563_RTC
 #include "pcf8563.h"
 #endif
 
@@ -135,7 +135,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // OLED & Input
 // -----------------------------------------------------------------------------
-#if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
+#if defined(SEEED_WIO_TRACKER_L1)
 #define SSD1306_ADDRESS 0x3D
 #define USE_SH1106
 #else
@@ -150,12 +150,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// I2C Keyboards (M5Stack, RAK14004, T-Deck, T-Deck Pro, T-Lora Pager, CardKB, BBQ10, MPR121, TCA8418)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
 #define TDECK_KB_ADDR 0x55
 #define BBQ10_KB_ADDR 0x1F
 #define MPR121_KB_ADDR 0x5A
-#define TCA8418_KB_ADDR 0x34
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -194,11 +193,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MLX90614_ADDR_DEF 0x5A
 #define CGRADSENS_ADDR 0x66
 #define LTR390UV_ADDR 0x53
-#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418_KB
+#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418
 #define PCT2075_ADDR 0x37
-#define BQ27220_ADDR 0x55 // same address as TDECK_KB
-#define BQ25896_ADDR 0x6B
-#define LTR553ALS_ADDR 0x23
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
@@ -212,7 +208,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BMX160_ADDR 0x69
 #define ICM20948_ADDR 0x69
 #define ICM20948_ADDR_ALT 0x68
-#define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
 
 // -----------------------------------------------------------------------------
@@ -235,7 +230,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -262,13 +256,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VEXT_ON_VALUE LOW
 #endif
 
-// -----------------------------------------------------------------------------
-// Rotary encoder
-// -----------------------------------------------------------------------------
-#ifndef ROTARY_DELAY
-#define ROTARY_DELAY 5
-#endif
-
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------

src/detect/ScanI2C.h

@@ -74,14 +74,7 @@ class ScanI2C
         RAK12035,
         TCA8418KB,
         PCT2075,
-        CST328,
-        BQ25896,
-        BQ27220,
-        LTR553ALS,
-        BHI260AP,
         BMM150,
-        TSL2561,
-        DRV2605
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -1,8 +1,8 @@
 #include "ScanI2CTwoWire.h"
 
 #if !MESHTASTIC_EXCLUDE_I2C
-
 #include "concurrency/LockGuard.h"
+#include <SE05X.h>
 #if defined(ARCH_PORTDUINO)
 #include "linux/LinuxHardwareI2C.h"
 #endif
@@ -184,13 +184,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = RTC_RV3028;
                 logFoundDevice("RV3028", (uint8_t)addr.address);
                 rtc.initI2C(*i2cBus);
-                // Update RTC EEPROM settings, if necessary
+                rtc.writeToRegister(0x35, 0x07); // no Clkout
-                if (rtc.readEEPROMRegister(0x35) != 0x07) {
+                rtc.writeToRegister(0x37, 0xB4);
-                    rtc.writeEEPROMRegister(0x35, 0x07); // no Clkout
-                }
-                if (rtc.readEEPROMRegister(0x37) != 0xB4) {
-                    rtc.writeEEPROMRegister(0x37, 0xB4);
-                }
                 break;
 #endif
 
@@ -211,17 +206,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
 
-            case TDECK_KB_ADDR:
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard", (uint8_t)addr.address);
-                // Do we have the T-Deck keyboard or the T-Deck Pro battery sensor?
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
-                if (registerValue != 0) {
-                    logFoundDevice("BQ27220", (uint8_t)addr.address);
-                    type = BQ27220;
-                } else {
-                    logFoundDevice("TDECKKB", (uint8_t)addr.address);
-                    type = TDECKKB;
-                }
-                break;
                 SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address);
 
                 SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address);
@@ -294,7 +279,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 type = AHT10;
                 break;
 #endif
-#if !defined(M5STACK_UNITC6L)
             case INA_ADDR:
             case INA_ADDR_ALTERNATE:
             case INA_ADDR_WAVESHARE_UPS:
@@ -341,7 +325,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     // else: probably a RAK12500/UBLOX GPS on I2C
                 }
                 break;
-#endif
             case MCP9808_ADDR:
                 // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some
                 // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips.
@@ -413,12 +396,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BQ24295", (uint8_t)addr.address);
                     break;
                 }
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x14), 1); // get ID
-                if ((registerValue & 0b00000011) == 0b00000010) {
-                    type = BQ25896;
-                    logFoundDevice("BQ25896", (uint8_t)addr.address);
-                    break;
-                }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
                 if (registerValue == 0x6A) {
                     type = LSM6DS3;
@@ -463,26 +440,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-            case TSL25911_ADDR:
+                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
-                if (registerValue == 0x50) {
-                    type = TSL2591;
-                    logFoundDevice("TSL25911", (uint8_t)addr.address);
-                } else {
-                    type = TSL2561;
-                    logFoundDevice("TSL2561", (uint8_t)addr.address);
-                }
-                break;
-
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
 #ifdef HAS_TPS65233
@@ -495,14 +459,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // DRV2605_REG_STATUS
+                    type = MPR121KB;
-                    if (registerValue == 0xe0) {
+                    logFoundDevice("MPR121KB", (uint8_t)addr.address);
-                        type = DRV2605;
-                        logFoundDevice("DRV2605", (uint8_t)addr.address);
-                    } else {
-                        type = MPR121KB;
-                        logFoundDevice("MPR121KB", (uint8_t)addr.address);
-                    }
                 }
                 break;
 
@@ -549,6 +507,10 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 if (len == 5 && memcmp(expectedInfo, info, len) == 0) {
                     LOG_INFO("NXP SE050 crypto chip found");
                     type = NXP_SE050;
+                    if (SE05X.begin()) {
+                        LOG_INFO("NXP Random %u", SE05X.random(65535));
+                        LOG_INFO("NXP Serial Number: %s", SE05X.serialNumber().c_str());
+                    }
 
                 } else {
                     LOG_INFO("FT6336U touchscreen found");

src/gps/GPS.cpp

@@ -1,4 +1,5 @@
 #include <cstring> // Include for strstr
+#include <string>
 #include <vector>
 
 #include "configuration.h"
@@ -38,9 +39,9 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
-#if defined(GPS_SERIAL_PORT)
+#if defined(RAK2560)
-HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
+HardwareSerial *GPS::_serial_gps = &Serial2;
 #else
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #endif
@@ -516,7 +517,6 @@ bool GPS::setup()
                 }
             }
             // Rare Serial Speeds
-#ifndef CONFIG_IDF_TARGET_ESP32C6
             if (probeTries == GPS_PROBETRIES) {
                 LOG_DEBUG("Probe for GPS at %d", rareSerialSpeeds[speedSelect]);
                 gnssModel = probe(rareSerialSpeeds[speedSelect]);
@@ -527,7 +527,6 @@ bool GPS::setup()
                     }
                 }
             }
-#endif
         }
 
         if (gnssModel != GNSS_MODEL_UNKNOWN) {
@@ -644,16 +643,8 @@ bool GPS::setup()
             delay(250);
         } else if (IS_ONE_OF(gnssModel, GNSS_MODEL_AG3335, GNSS_MODEL_AG3352)) {
 
-            if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_IN ||
+            _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
-                config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_NP_865) {
+
-                _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
-                // GPS GLONASS GALILEO BDS QZSS NAVIC
-                //  1    0       1      0   0    1
-            } else {
-                _serial_gps->write("$PAIR066,1,1,1,1,0,0*3A\r\n"); // Enable GPS+GLONASS+GALILEO+BDS
-                // GPS GLONASS GALILEO BDS QZSS NAVIC
-                //  1    1       1      1   0    0
-            }
             // Configure NMEA (sentences will output once per fix)
             _serial_gps->write("$PAIR062,0,1*3F\r\n"); // GGA ON
             _serial_gps->write("$PAIR062,1,0*3F\r\n"); // GLL OFF
@@ -809,14 +800,6 @@ bool GPS::setup()
             } else {
                 LOG_INFO("GNSS module configuration saved!");
             }
-        } else if (gnssModel == GNSS_MODEL_CM121) {
-            // only ask for RMC and GGA
-            // enable GGA
-            _serial_gps->write("$CFGMSG,0,0,1,1*1B\r\n");
-            delay(250);
-            // enable RMC
-            _serial_gps->write("$CFGMSG,0,4,1,1*1F\r\n");
-            delay(250);
         }
         didSerialInit = true;
     }
@@ -852,6 +835,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         setPowerPMU(true);                                        // Power (PMU): on
         writePinStandby(false);                                   // Standby (pin): awake (not standby)
         setPowerUBLOX(true);                                      // Standby (UBLOX): awake
+#ifdef GNSS_AIROHA
+        lastFixStartMsec = 0;
+#endif
         break;
 
     case GPS_SOFTSLEEP:
@@ -869,7 +855,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep (not awake)
         setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
 
@@ -881,7 +869,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep
         setPowerUBLOX(false, 0);                                    // Standby (UBLOX): asleep, indefinitely
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
     }
@@ -1064,8 +1054,6 @@ void GPS::down()
         }
         // If update interval long enough (or softsleep unsupported): hardsleep instead
         setPowerState(GPS_HARDSLEEP, sleepTime);
-        // Reset the fix quality to 0, since we're off.
-        fixQual = 0;
     }
 }
 
@@ -1125,19 +1113,11 @@ int32_t GPS::runOnce()
         shouldPublish = true;
     }
 
-    uint8_t prev_fixQual = fixQual;
     bool gotLoc = lookForLocation();
     if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
         LOG_DEBUG("hasValidLocation RISING EDGE");
         hasValidLocation = true;
         shouldPublish = true;
-        // Hold for 20secs after getting a lock to download ephemeris etc
-        fixHoldEnds = millis() + 20000;
-    }
-
-    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
-        fixHoldEnds = millis() + 20000;
-        shouldPublish = true; // Publish immediately, since next publish is at end of hold
     }
 
     bool tooLong = scheduling.searchedTooLong();
@@ -1146,7 +1126,8 @@ int32_t GPS::runOnce()
 
     // Once we get a location we no longer desperately want an update
     if ((gotLoc && gotTime) || tooLong) {
-        if (tooLong && !gotLoc) {
+
+        if (tooLong) {
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
                 LOG_DEBUG("hasValidLocation FALLING EDGE");
@@ -1154,15 +1135,9 @@ int32_t GPS::runOnce()
             p = meshtastic_Position_init_default;
             hasValidLocation = false;
         }
-        if (millis() > fixHoldEnds) {
+
-            shouldPublish = true; // publish our update at the end of the lock hold
+        down();
-            publishUpdate();
+        shouldPublish = true; // publish our update for this just finished acquisition window
-            down();
-#ifdef GPS_DEBUG
-        } else {
-            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
-#endif
-        }
     }
 
     // If state has changed do a publish
@@ -1215,7 +1190,7 @@ static const char *DETECTED_MESSAGE = "%s detected";
         LOG_DEBUG(PROBE_MESSAGE, COMMAND, FAMILY_NAME);                                                                          \
         clearBuffer();                                                                                                           \
         _serial_gps->write(COMMAND "\r\n");                                                                                      \
-        GnssModel_t detectedDriver = getProbeResponse(TIMEOUT, RESPONSE_MAP, serialSpeed);                                       \
+        GnssModel_t detectedDriver = getProbeResponse(TIMEOUT, RESPONSE_MAP);                                                    \
         if (detectedDriver != GNSS_MODEL_UNKNOWN) {                                                                              \
             return detectedDriver;                                                                                               \
         }                                                                                                                        \
@@ -1249,15 +1224,9 @@ GnssModel_t GPS::probe(int serialSpeed)
     _serial_gps->write("$PUBX,40,GSV,0,0,0,0,0,0*59\r\n");
     _serial_gps->write("$PUBX,40,VTG,0,0,0,0,0,0*5E\r\n");
     delay(20);
-    // Close NMEA sequences on CM121
-    _serial_gps->write("$CFGMSG,0,1,0,1*1B\r\n");
-    _serial_gps->write("$CFGMSG,0,2,0,1*18\r\n");
-    _serial_gps->write("$CFGMSG,0,3,0,1*19\r\n");
-    delay(20);
 
-    // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A,or CM121
+    // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A
-    std::vector<ChipInfo> unicore = {
+    std::vector<ChipInfo> unicore = {{"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}};
-        {"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}, {"CM121", "CM121", GNSS_MODEL_CM121}};
     PROBE_FAMILY("Unicore Family", "$PDTINFO", unicore, 500);
 
     std::vector<ChipInfo> atgm = {
@@ -1383,55 +1352,36 @@ GnssModel_t GPS::probe(int serialSpeed)
     return GNSS_MODEL_UNKNOWN;
 }
 
-GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap, int serialSpeed)
+GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap)
 {
-    // Calculate buffer size based on baud rate - 256 bytes for 9600 baud as baseline
+    String response = "";
-    // Higher baud rates get proportionally larger buffers to handle more data
-    int bufferSize = (serialSpeed * 256) / 9600;
-    // Clamp buffer size between reasonable limits
-    if (bufferSize < 128)
-        bufferSize = 128;
-    if (bufferSize > 2048)
-        bufferSize = 2048;
-
-    char *response = new char[bufferSize](); // Dynamically allocate based on baud rate
-    uint16_t responseLen = 0;
     unsigned long start = millis();
     while (millis() - start < timeout) {
         if (_serial_gps->available()) {
-            char c = _serial_gps->read();
+            response += (char)_serial_gps->read();
 
-            // Add char to buffer if there's space
+            if (response.endsWith(",") || response.endsWith("\r\n")) {
-            if (responseLen < bufferSize - 1) {
-                response[responseLen++] = c;
-                response[responseLen] = '\0';
-            }
-
-            if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
 #ifdef GPS_DEBUG
-                LOG_DEBUG(response);
+                LOG_DEBUG(response.c_str());
 #endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
-                    if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
+                    if (strstr(response.c_str(), chipInfo.detectionString.c_str()) != nullptr) {
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
-                        delete[] response; // Cleanup before return
                         return chipInfo.driver;
                     }
                 }
             }
-            if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
+            if (response.endsWith("\r\n")) {
-                // Reset the response buffer for the next potential message
+                response.trim();
-                responseLen = 0;
+                response = ""; // Reset the response string for the next potential message
-                response[0] = '\0';
             }
         }
     }
 #ifdef GPS_DEBUG
-    LOG_DEBUG(response);
+    LOG_DEBUG(response.c_str());
 #endif
-    delete[] response;         // Cleanup before return
+    return GNSS_MODEL_UNKNOWN; // Return empty string on timeout
-    return GNSS_MODEL_UNKNOWN; // Return unknown on timeout
 }
 
 GPS *GPS::createGps()
@@ -1456,7 +1406,7 @@ GPS *GPS::createGps()
         _en_gpio = PIN_GPS_EN;
 #endif
 #ifdef ARCH_PORTDUINO
-    if (!portduino_config.has_gps)
+    if (!settingsMap[has_gps])
         return nullptr;
 #endif
     if (!_rx_gpio || !_serial_gps) // Configured to have no GPS at all
@@ -1546,10 +1496,28 @@ static int32_t toDegInt(RawDegrees d)
  * Perform any processing that should be done only while the GPS is awake and looking for a fix.
  * Override this method to check for new locations
  *
- * @return true if we've set a new time
+ * @return true if we've acquired a new location
  */
 bool GPS::lookForTime()
 {
+
+#ifdef GNSS_AIROHA
+    uint8_t fix = reader.fixQuality();
+    if (fix > 0) {
+        if (lastFixStartMsec > 0) {
+            if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                return false;
+            } else {
+                clearBuffer();
+            }
+        } else {
+            lastFixStartMsec = millis();
+            return false;
+        }
+    } else {
+        return false;
+    }
+#endif
     auto ti = reader.time;
     auto d = reader.date;
     if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
@@ -1566,13 +1534,13 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         t.tm_year = d.year() - 1900;
         t.tm_isdst = false;
         if (t.tm_mon > -1) {
-            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultSuccess) {
+            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
-                LOG_DEBUG("NMEA GPS time set %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour,
+                      t.tm_sec, ti.age());
-                          t.tm_min, t.tm_sec, ti.age());
+            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultInvalidTime) {
-                return true;
+                // Clear the GPS buffer if we got an invalid time
-            } else {
+                clearBuffer();
-                return false;
             }
+            return true;
         } else
             return false;
     } else
@@ -1587,6 +1555,25 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
  */
 bool GPS::lookForLocation()
 {
+#ifdef GNSS_AIROHA
+    if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
+        uint8_t fix = reader.fixQuality();
+        if (fix > 0) {
+            if (lastFixStartMsec > 0) {
+                if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                    return false;
+                } else {
+                    clearBuffer();
+                }
+            } else {
+                lastFixStartMsec = millis();
+                return false;
+            }
+        } else {
+            return false;
+        }
+    }
+#endif
     // By default, TinyGPS++ does not parse GPGSA lines, which give us
     //   the 2D/3D fixType (see NMEAGPS.h)
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)

src/gps/GPS.h

@@ -31,8 +31,7 @@ typedef enum {
     GNSS_MODEL_MTK_PA1616S,
     GNSS_MODEL_AG3335,
     GNSS_MODEL_AG3352,
-    GNSS_MODEL_LS20031,
+    GNSS_MODEL_LS20031
-    GNSS_MODEL_CM121
 } GnssModel_t;
 
 typedef enum {
@@ -160,7 +159,7 @@ class GPS : private concurrency::OSThread
     uint8_t fixType = 0;      // fix type from GPGSA
 #endif
 
-    uint32_t fixHoldEnds = 0;
+    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
 
@@ -237,7 +236,7 @@ class GPS : private concurrency::OSThread
 
     virtual int32_t runOnce() override;
 
-    GnssModel_t getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap, int serialSpeed);
+    GnssModel_t getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap);
 
     // Get GNSS model
     GnssModel_t probe(int serialSpeed);

src/gps/RTC.cpp

@@ -9,9 +9,6 @@
 static RTCQuality currentQuality = RTCQualityNone;
 uint32_t lastSetFromPhoneNtpOrGps = 0;
 
-static uint32_t lastTimeValidationWarning = 0;
-static const uint32_t TIME_VALIDATION_WARNING_INTERVAL_MS = 15000; // 15 seconds
-
 RTCQuality getRTCQuality()
 {
     return currentQuality;
@@ -26,7 +23,7 @@ static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only upda
  * Reads the current date and time from the RTC module and updates the system time.
  * @return True if the RTC was successfully read and the system time was updated, false otherwise.
  */
-RTCSetResult readFromRTC()
+void readFromRTC()
 {
     struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
@@ -47,25 +44,15 @@ RTCSetResult readFromRTC()
         t.tm_sec = rtc.getSecond();
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
+
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-
-#ifdef BUILD_EPOCH
-        if (tv.tv_sec < BUILD_EPOCH) {
-            if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-                LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            }
-            return RTCSetResultInvalidTime;
-        }
-#endif
-
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
-        return RTCSetResultSuccess;
     }
 #elif defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
@@ -88,26 +75,15 @@ RTCSetResult readFromRTC()
         t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
+
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-
-#ifdef BUILD_EPOCH
-        if (tv.tv_sec < BUILD_EPOCH) {
-            if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-                LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-                lastTimeValidationWarning = millis();
-            }
-            return RTCSetResultInvalidTime;
-        }
-#endif
-
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
-        return RTCSetResultSuccess;
     }
 #else
     if (!gettimeofday(&tv, NULL)) {
@@ -116,10 +92,8 @@ RTCSetResult readFromRTC()
         LOG_DEBUG("Read RTC time as %ld", printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
-        return RTCSetResultSuccess;
     }
 #endif
-    return RTCSetResultNotSet;
 }
 
 /**
@@ -127,7 +101,7 @@ RTCSetResult readFromRTC()
  *
  * @param q The quality of the provided time.
  * @param tv A pointer to a timeval struct containing the time to potentially set the RTC to.
- * @return RTCSetResult
+ * @return True if the RTC was set, false otherwise.
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
@@ -138,20 +112,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
     uint32_t printableEpoch = tv->tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
 #ifdef BUILD_EPOCH
     if (tv->tv_sec < BUILD_EPOCH) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
+        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            lastTimeValidationWarning = millis();
-        }
-        return RTCSetResultInvalidTime;
-    } else if ((uint64_t)tv->tv_sec > ((uint64_t)BUILD_EPOCH + FORTY_YEARS)) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            // Calculate max allowed time safely to avoid overflow in logging
-            uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
-            uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
-                     (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
-            lastTimeValidationWarning = millis();
-        }
         return RTCSetResultInvalidTime;
     }
 #endif
@@ -265,27 +226,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     time_t res = gm_mktime(&t);
     struct timeval tv;
     tv.tv_sec = res;
-    tv.tv_usec = 0;                      // time.centisecond() * (10 / 1000);
+    tv.tv_usec = 0; // time.centisecond() * (10 / 1000);
-    uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
-#ifdef BUILD_EPOCH
-    if (tv.tv_sec < BUILD_EPOCH) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-            lastTimeValidationWarning = millis();
-        }
-        return RTCSetResultInvalidTime;
-    } else if ((uint64_t)tv.tv_sec > ((uint64_t)BUILD_EPOCH + FORTY_YEARS)) {
-        if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            // Calculate max allowed time safely to avoid overflow in logging
-            uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
-            uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
-                     (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
-            lastTimeValidationWarning = millis();
-        }
-        return RTCSetResultInvalidTime;
-    }
-#endif
 
     // LOG_DEBUG("Got time from GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
     if (t.tm_year < 0 || t.tm_year >= 300) {
@@ -342,40 +283,14 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
 time_t gm_mktime(struct tm *tm)
 {
 #if !MESHTASTIC_EXCLUDE_TZ
-    time_t result = 0;
+    setenv("TZ", "GMT0", 1);
-
+    time_t res = mktime(tm);
-    // First, get us to the start of tm->year, by calcuating the number of days since the Unix epoch.
+    if (*config.device.tzdef) {
-    int year = 1900 + tm->tm_year; // tm_year is years since 1900
+        setenv("TZ", config.device.tzdef, 1);
-    int year_minus_one = year - 1;
+    } else {
-    int days_before_this_year = 0;
+        setenv("TZ", "UTC0", 1);
-    days_before_this_year += year_minus_one * 365;
-    // leap days: every 4 years, except 100s, but including 400s.
-    days_before_this_year += year_minus_one / 4 - year_minus_one / 100 + year_minus_one / 400;
-    // subtract from 1970-01-01 to get days since epoch
-    days_before_this_year -= 719162; // (1969 * 365 + 1969 / 4 - 1969 / 100 + 1969 / 400);
-
-    // Now, within this tm->year, compute the days *before* this tm->month starts.
-    int days_before_month[12] = {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334}; // non-leap year
-    int days_this_year_before_this_month = days_before_month[tm->tm_mon];                // tm->tm_mon is 0..11
-
-    // If this is a leap year, and we're past February, add a day:
-    if (tm->tm_mon >= 2 && (year % 4) == 0 && ((year % 100) != 0 || (year % 400) == 0)) {
-        days_this_year_before_this_month += 1;
     }
-
+    return res;
-    // And within this month:
-    int days_this_month_before_today = tm->tm_mday - 1; // tm->tm_mday is 1..31
-
-    // Now combine them all together, and convert days to seconds:
-    result += (days_before_this_year + days_this_year_before_this_month + days_this_month_before_today);
-    result *= 86400L;
-
-    // Finally, add in the hours, minutes, and seconds of today:
-    result += tm->tm_hour * 3600;
-    result += tm->tm_min * 60;
-    result += tm->tm_sec;
-
-    return result;
 #else
     return mktime(tm);
 #endif

src/gps/RTC.h

@@ -48,13 +48,10 @@ uint32_t getTime(bool local = false);
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
 uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
-RTCSetResult readFromRTC();
+void readFromRTC();
 
 time_t gm_mktime(struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60
-#ifdef BUILD_EPOCH
-static constexpr uint64_t FORTY_YEARS = (40ULL * 365 * SEC_PER_DAY); // Use 64-bit arithmetic to prevent overflow
-#endif

src/graphics/EInkDisplay2.cpp

@@ -67,28 +67,20 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 
     // FIXME - only draw bits have changed (use backbuf similar to the other displays)
     const bool flipped = config.display.flip_screen;
-    // HACK for L1 EInk
-#if defined(SEEED_WIO_TRACKER_L1_EINK)
-    // For SEEED_WIO_TRACKER_L1_EINK, setRotation(3) is correct but mirrored; flip both axes
-    for (uint32_t y = 0; y < displayHeight; y++) {
-        for (uint32_t x = 0; x < displayWidth; x++) {
-            auto b = buffer[x + (y / 8) * displayWidth];
-            auto isset = b & (1 << (y & 7));
-            adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
-        }
-    }
-#else
     for (uint32_t y = 0; y < displayHeight; y++) {
         for (uint32_t x = 0; x < displayWidth; x++) {
+            // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
             auto b = buffer[x + (y / 8) * displayWidth];
             auto isset = b & (1 << (y & 7));
+
+            // Handle flip here, rather than with setRotation(),
+            // Avoids issues when display width is not a multiple of 8
             if (flipped)
                 adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
             else
                 adafruitDisplay->drawPixel(x, y, isset ? GxEPD_BLACK : GxEPD_WHITE);
         }
     }
-#endif
 
     // Trigger the refresh in GxEPD2
     LOG_DEBUG("Update E-Paper");
@@ -148,32 +140,17 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 
         adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
-#if defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
+#ifdef ELECROW_ThinkNode_M1
         adafruitDisplay->setRotation(4);
 #else
         adafruitDisplay->setRotation(3);
 #endif
-        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
-    }
-#elif defined(ELECROW_ThinkNode_M5)
-    {
-        // Start HSPI
-        hspi = new SPIClass(HSPI);
-        hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
-
-        auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
-
-        adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-        adafruitDisplay->init();
-
-        adafruitDisplay->setRotation(4);
-
         adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     }
 #elif defined(MESHLINK)
@@ -229,7 +206,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(0);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(M5_COREINK) || defined(T_DECK_PRO)
+#elif defined(M5_COREINK)
     auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
     adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
     adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
@@ -243,7 +220,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(1);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK)
+#elif defined(HELTEC_MESH_POCKET)
     {
         spi1 = &SPI1;
         spi1->begin();
@@ -257,7 +234,6 @@ bool EInkDisplay::connect()
         // Init GxEPD2
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
-        adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
 #elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
 

src/graphics/EInkDisplay2.h

@@ -80,11 +80,11 @@ class EInkDisplay : public OLEDDisplay
     // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
     defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
-    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) || defined(ELECROW_ThinkNode_M5)
+    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
     SPIClass *hspi = NULL;
 #endif
 
-#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK)
+#if defined(HELTEC_MESH_POCKET)
     SPIClass *spi1 = NULL;
 #endif
 

src/graphics/Screen.cpp

@@ -25,7 +25,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "PowerMon.h"
 #include "Throttle.h"
 #include "configuration.h"
-#include "meshUtils.h"
 #if HAS_SCREEN
 #include <OLEDDisplay.h>
 
@@ -59,6 +58,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "mesh-pb-constants.h"
 #include "mesh/Channels.h"
 #include "mesh/generated/meshtastic/deviceonly.pb.h"
+#include "meshUtils.h"
 #include "modules/ExternalNotificationModule.h"
 #include "modules/TextMessageModule.h"
 #include "modules/WaypointModule.h"
@@ -216,44 +216,6 @@ void Screen::showNumberPicker(const char *message, uint32_t durationMs, uint8_t
     ui->update();
 }
 
-void Screen::showTextInput(const char *header, const char *initialText, uint32_t durationMs,
-                           std::function<void(const std::string &)> textCallback)
-{
-    LOG_INFO("showTextInput called with header='%s', durationMs=%d", header ? header : "NULL", durationMs);
-
-    if (NotificationRenderer::virtualKeyboard) {
-        delete NotificationRenderer::virtualKeyboard;
-        NotificationRenderer::virtualKeyboard = nullptr;
-    }
-
-    NotificationRenderer::textInputCallback = nullptr;
-
-    NotificationRenderer::virtualKeyboard = new VirtualKeyboard();
-    if (header) {
-        NotificationRenderer::virtualKeyboard->setHeader(header);
-    }
-    if (initialText) {
-        NotificationRenderer::virtualKeyboard->setInputText(initialText);
-    }
-
-    // Set up callback with safer cleanup mechanism
-    NotificationRenderer::textInputCallback = textCallback;
-    NotificationRenderer::virtualKeyboard->setCallback([textCallback](const std::string &text) { textCallback(text); });
-
-    // Store the message and set the expiration timestamp (use same pattern as other notifications)
-    strncpy(NotificationRenderer::alertBannerMessage, header ? header : "Text Input", 255);
-    NotificationRenderer::alertBannerMessage[255] = '\0';
-    NotificationRenderer::alertBannerUntil = (durationMs == 0) ? 0 : millis() + durationMs;
-    NotificationRenderer::pauseBanner = false;
-    NotificationRenderer::current_notification_type = notificationTypeEnum::text_input;
-
-    // Set the overlay using the same pattern as other notification types
-    static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
-    ui->setTargetFPS(60);
-    ui->update();
-}
-
 static void drawModuleFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     uint8_t module_frame;
@@ -355,16 +317,8 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif defined(USE_SPISSD1306)
-    dispdev = new SSD1306Spi(SSD1306_RESET, SSD1306_RS, SSD1306_NSS, GEOMETRY_64_48);
-    if (!dispdev->init()) {
-        LOG_DEBUG("Error: SSD1306 not detected!");
-    } else {
-        static_cast<SSD1306Spi *>(dispdev)->setHorizontalOffset(32);
-        LOG_INFO("SSD1306 init success");
-    }
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -378,7 +332,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif ARCH_PORTDUINO
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-        if (portduino_config.displayPanel != no_screen) {
+        if (settingsMap[displayPanel] != no_screen) {
             LOG_DEBUG("Make TFTDisplay!");
             dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                                      (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -411,6 +365,9 @@ void Screen::doDeepSleep()
 {
 #ifdef USE_EINK
     setOn(false, graphics::UIRenderer::drawDeepSleepFrame);
+#ifdef PIN_EINK_EN
+    digitalWrite(PIN_EINK_EN, LOW); // power off backlight
+#endif
 #else
     // Without E-Ink display:
     setOn(false);
@@ -429,19 +386,13 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #ifdef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
-
+#ifdef HELTEC_TRACKER_V1_X
+            uint8_t tft_vext_enabled = digitalRead(VEXT_ENABLE);
+#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
 
-#ifdef PIN_EINK_EN
-            if (uiconfig.screen_brightness == 1)
-                digitalWrite(PIN_EINK_EN, HIGH);
-#elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1)
-                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
-#endif
-
 #if defined(ST7789_CS) &&                                                                                                        \
     !defined(M5STACK) // set display brightness when turning on screens. Just moved function from TFTDisplay to here.
             static_cast<TFTDisplay *>(dispdev)->setDisplayBrightness(brightness);
@@ -449,7 +400,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 
             dispdev->displayOn();
 #ifdef HELTEC_TRACKER_V1_X
-            ui->init();
+            // If the TFT VEXT power is not enabled, initialize the UI.
+            if (!tft_vext_enabled) {
+                ui->init();
+            }
 #endif
 #ifdef USE_ST7789
             pinMode(VTFT_CTRL, OUTPUT);
@@ -471,13 +425,11 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             // eInkScreensaver parameter is usually NULL (default argument), default frame used instead
             setScreensaverFrames(einkScreensaver);
 #endif
-
+#ifdef ELECROW_ThinkNode_M1
-#ifdef PIN_EINK_EN
+            if (digitalRead(PIN_EINK_EN) == HIGH) {
-            digitalWrite(PIN_EINK_EN, LOW);
+                digitalWrite(PIN_EINK_EN, LOW);
-#elif defined(PCA_PIN_EINK_EN)
+            }
-            io.digitalWrite(PCA_PIN_EINK_EN, LOW);
 #endif
-
             dispdev->displayOff();
 #ifdef USE_ST7789
             SPI1.end();
@@ -553,7 +505,7 @@ void Screen::setup()
     // === Apply loaded brightness ===
 #if defined(ST7789_CS)
     static_cast<TFTDisplay *>(dispdev)->setDisplayBrightness(brightness);
-#elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SPISSD1306)
+#elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
     dispdev->setBrightness(brightness);
 #endif
     LOG_INFO("Applied screen brightness: %d", brightness);
@@ -596,11 +548,11 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
-#elif !defined(M5STACK_UNITC6L)
+#else
         dispdev->flipScreenVertically();
 #endif
     }
@@ -626,13 +578,13 @@ void Screen::setup()
 
 #if ARCH_PORTDUINO
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-        if (portduino_config.touchscreenModule) {
+        if (settingsMap[touchscreenModule]) {
             touchScreenImpl1 =
                 new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
+#elif HAS_TOUCHSCREEN
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();
@@ -738,11 +690,7 @@ int32_t Screen::runOnce()
 
 #ifndef DISABLE_WELCOME_UNSET
     if (!NotificationRenderer::isOverlayBannerShowing() && config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-#if defined(M5STACK_UNITC6L)
+        menuHandler::LoraRegionPicker(0);
-        menuHandler::LoraRegionPicker();
-#else
-        menuHandler::OnboardMessage();
-#endif
     }
 #endif
     if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0) {
@@ -763,19 +711,13 @@ int32_t Screen::runOnce()
             handleSetOn(false);
             break;
         case Cmd::ON_PRESS:
-            if (NotificationRenderer::current_notification_type != notificationTypeEnum::text_input) {
+            handleOnPress();
-                handleOnPress();
-            }
             break;
         case Cmd::SHOW_PREV_FRAME:
-            if (NotificationRenderer::current_notification_type != notificationTypeEnum::text_input) {
+            handleShowPrevFrame();
-                handleShowPrevFrame();
-            }
             break;
         case Cmd::SHOW_NEXT_FRAME:
-            if (NotificationRenderer::current_notification_type != notificationTypeEnum::text_input) {
+            handleShowNextFrame();
-                handleShowNextFrame();
-            }
             break;
         case Cmd::START_ALERT_FRAME: {
             showingBootScreen = false; // this should avoid the edge case where an alert triggers before the boot screen goes away
@@ -797,9 +739,7 @@ int32_t Screen::runOnce()
             NotificationRenderer::pauseBanner = false;
         case Cmd::STOP_BOOT_SCREEN:
             EINK_ADD_FRAMEFLAG(dispdev, COSMETIC); // E-Ink: Explicitly use full-refresh for next frame
-            if (NotificationRenderer::current_notification_type != notificationTypeEnum::text_input) {
+            setFrames();
-                setFrames();
-            }
             break;
         case Cmd::NOOP:
             break;
@@ -835,7 +775,6 @@ int32_t Screen::runOnce()
     if (showingNormalScreen) {
         // standard screen loop handling here
         if (config.display.auto_screen_carousel_secs > 0 &&
-            NotificationRenderer::current_notification_type != notificationTypeEnum::text_input &&
             !Throttle::isWithinTimespanMs(lastScreenTransition, config.display.auto_screen_carousel_secs * 1000)) {
 
             // If an E-Ink display struggles with fast refresh, force carousel to use full refresh instead
@@ -926,17 +865,10 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
 // Called when a frame should be added / removed, or custom frames should be cleared
 void Screen::setFrames(FrameFocus focus)
 {
-    // Block setFrames calls when virtual keyboard is active to prevent overlay interference
-    if (NotificationRenderer::current_notification_type == notificationTypeEnum::text_input) {
-        return;
-    }
-
     uint8_t originalPosition = ui->getUiState()->currentFrame;
     uint8_t previousFrameCount = framesetInfo.frameCount;
     FramesetInfo fsi; // Location of specific frames, for applying focus parameter
 
-    graphics::UIRenderer::rebuildFavoritedNodes();
-
     LOG_DEBUG("Show standard frames");
     showingNormalScreen = true;
 
@@ -953,95 +885,71 @@ void Screen::setFrames(FrameFocus focus)
     }
 
 #if defined(DISPLAY_CLOCK_FRAME)
-    if (!hiddenFrames.clock) {
+    fsi.positions.clock = numframes;
-        fsi.positions.clock = numframes;
+    normalFrames[numframes++] = uiconfig.is_clockface_analog ? graphics::ClockRenderer::drawAnalogClockFrame
-#if defined(M5STACK_UNITC6L)
+                                                             : graphics::ClockRenderer::drawDigitalClockFrame;
-        normalFrames[numframes++] = graphics::ClockRenderer::drawAnalogClockFrame;
+    indicatorIcons.push_back(digital_icon_clock);
-#else
-        normalFrames[numframes++] = uiconfig.is_clockface_analog ? graphics::ClockRenderer::drawAnalogClockFrame
-                                                                 : graphics::ClockRenderer::drawDigitalClockFrame;
-#endif
-        indicatorIcons.push_back(digital_icon_clock);
-    }
 #endif
 
     // Declare this early so it’s available in FOCUS_PRESERVE block
     bool willInsertTextMessage = shouldDrawMessage(&devicestate.rx_text_message);
 
-    if (!hiddenFrames.home) {
+    fsi.positions.home = numframes;
-        fsi.positions.home = numframes;
+    normalFrames[numframes++] = graphics::UIRenderer::drawDeviceFocused;
-        normalFrames[numframes++] = graphics::UIRenderer::drawDeviceFocused;
+    indicatorIcons.push_back(icon_home);
-        indicatorIcons.push_back(icon_home);
-    }
 
     fsi.positions.textMessage = numframes;
     normalFrames[numframes++] = graphics::MessageRenderer::drawTextMessageFrame;
     indicatorIcons.push_back(icon_mail);
 
 #ifndef USE_EINK
-    if (!hiddenFrames.nodelist) {
+    fsi.positions.nodelist = numframes;
-        fsi.positions.nodelist = numframes;
+    normalFrames[numframes++] = graphics::NodeListRenderer::drawDynamicNodeListScreen;
-        normalFrames[numframes++] = graphics::NodeListRenderer::drawDynamicNodeListScreen;
+    indicatorIcons.push_back(icon_nodes);
-        indicatorIcons.push_back(icon_nodes);
-    }
 #endif
 
 // Show detailed node views only on E-Ink builds
 #ifdef USE_EINK
-    if (!hiddenFrames.nodelist_lastheard) {
+    fsi.positions.nodelist_lastheard = numframes;
-        fsi.positions.nodelist_lastheard = numframes;
+    normalFrames[numframes++] = graphics::NodeListRenderer::drawLastHeardScreen;
-        normalFrames[numframes++] = graphics::NodeListRenderer::drawLastHeardScreen;
+    indicatorIcons.push_back(icon_nodes);
-        indicatorIcons.push_back(icon_nodes);
+
-    }
+    fsi.positions.nodelist_hopsignal = numframes;
-    if (!hiddenFrames.nodelist_hopsignal) {
+    normalFrames[numframes++] = graphics::NodeListRenderer::drawHopSignalScreen;
-        fsi.positions.nodelist_hopsignal = numframes;
+    indicatorIcons.push_back(icon_signal);
-        normalFrames[numframes++] = graphics::NodeListRenderer::drawHopSignalScreen;
+
-        indicatorIcons.push_back(icon_signal);
+    fsi.positions.nodelist_distance = numframes;
-    }
+    normalFrames[numframes++] = graphics::NodeListRenderer::drawDistanceScreen;
-    if (!hiddenFrames.nodelist_distance) {
+    indicatorIcons.push_back(icon_distance);
-        fsi.positions.nodelist_distance = numframes;
-        normalFrames[numframes++] = graphics::NodeListRenderer::drawDistanceScreen;
-        indicatorIcons.push_back(icon_distance);
-    }
 #endif
 #if HAS_GPS
-    if (!hiddenFrames.nodelist_bearings) {
+    fsi.positions.nodelist_bearings = numframes;
-        fsi.positions.nodelist_bearings = numframes;
+    normalFrames[numframes++] = graphics::NodeListRenderer::drawNodeListWithCompasses;
-        normalFrames[numframes++] = graphics::NodeListRenderer::drawNodeListWithCompasses;
+    indicatorIcons.push_back(icon_list);
-        indicatorIcons.push_back(icon_list);
+
-    }
+    fsi.positions.gps = numframes;
-    if (!hiddenFrames.gps) {
+    normalFrames[numframes++] = graphics::UIRenderer::drawCompassAndLocationScreen;
-        fsi.positions.gps = numframes;
+    indicatorIcons.push_back(icon_compass);
-        normalFrames[numframes++] = graphics::UIRenderer::drawCompassAndLocationScreen;
-        indicatorIcons.push_back(icon_compass);
-    }
 #endif
-    if (RadioLibInterface::instance && !hiddenFrames.lora) {
+    if (RadioLibInterface::instance) {
         fsi.positions.lora = numframes;
         normalFrames[numframes++] = graphics::DebugRenderer::drawLoRaFocused;
         indicatorIcons.push_back(icon_radio);
     }
-    if (!hiddenFrames.system) {
+    if (!dismissedFrames.memory) {
-        fsi.positions.system = numframes;
+        fsi.positions.memory = numframes;
-        normalFrames[numframes++] = graphics::DebugRenderer::drawSystemScreen;
+        normalFrames[numframes++] = graphics::DebugRenderer::drawMemoryUsage;
-        indicatorIcons.push_back(icon_system);
+        indicatorIcons.push_back(icon_memory);
     }
 #if !defined(DISPLAY_CLOCK_FRAME)
-    if (!hiddenFrames.clock) {
+    fsi.positions.clock = numframes;
-        fsi.positions.clock = numframes;
+    normalFrames[numframes++] = uiconfig.is_clockface_analog ? graphics::ClockRenderer::drawAnalogClockFrame
-        normalFrames[numframes++] = uiconfig.is_clockface_analog ? graphics::ClockRenderer::drawAnalogClockFrame
+                                                             : graphics::ClockRenderer::drawDigitalClockFrame;
-                                                                 : graphics::ClockRenderer::drawDigitalClockFrame;
+    indicatorIcons.push_back(digital_icon_clock);
-        indicatorIcons.push_back(digital_icon_clock);
-    }
 #endif
-    if (!hiddenFrames.chirpy) {
-        fsi.positions.chirpy = numframes;
-        normalFrames[numframes++] = graphics::DebugRenderer::drawChirpy;
-        indicatorIcons.push_back(chirpy_small);
-    }
 
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
-    if (!hiddenFrames.wifi && isWifiAvailable()) {
+    if (!dismissedFrames.wifi && isWifiAvailable()) {
         fsi.positions.wifi = numframes;
         normalFrames[numframes++] = graphics::DebugRenderer::drawDebugInfoWiFiTrampoline;
         indicatorIcons.push_back(icon_wifi);
@@ -1083,29 +991,27 @@ void Screen::setFrames(FrameFocus focus)
     if (numMeshNodes > 0)
         numMeshNodes--;
 
-    if (!hiddenFrames.show_favorites) {
+    // Temporary array to hold favorite node frames
-        // Temporary array to hold favorite node frames
+    std::vector<FrameCallback> favoriteFrames;
-        std::vector<FrameCallback> favoriteFrames;
 
-        for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
+    for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
-            const meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
+        const meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
-            if (n && n->num != nodeDB->getNodeNum() && n->is_favorite) {
+        if (n && n->num != nodeDB->getNodeNum() && n->is_favorite) {
-                favoriteFrames.push_back(graphics::UIRenderer::drawNodeInfo);
+            favoriteFrames.push_back(graphics::UIRenderer::drawNodeInfo);
-            }
         }
+    }
 
-        // Insert favorite frames *after* collecting them all
+    // Insert favorite frames *after* collecting them all
-        if (!favoriteFrames.empty()) {
+    if (!favoriteFrames.empty()) {
-            fsi.positions.firstFavorite = numframes;
+        fsi.positions.firstFavorite = numframes;
-            for (const auto &f : favoriteFrames) {
+        for (auto &f : favoriteFrames) {
-                normalFrames[numframes++] = f;
+            normalFrames[numframes++] = f;
-                indicatorIcons.push_back(icon_node);
+            indicatorIcons.push_back(icon_node);
-            }
-            fsi.positions.lastFavorite = numframes - 1;
-        } else {
-            fsi.positions.firstFavorite = 255;
-            fsi.positions.lastFavorite = 255;
         }
+        fsi.positions.lastFavorite = numframes - 1;
+    } else {
+        fsi.positions.firstFavorite = 255;
+        fsi.positions.lastFavorite = 255;
     }
 
     fsi.frameCount = numframes;   // Total framecount is used to apply FOCUS_PRESERVE
@@ -1144,7 +1050,7 @@ void Screen::setFrames(FrameFocus focus)
         ui->switchToFrame(fsi.positions.clock);
         break;
     case FOCUS_SYSTEM:
-        ui->switchToFrame(fsi.positions.system);
+        ui->switchToFrame(fsi.positions.memory);
         break;
 
     case FOCUS_PRESERVE:
@@ -1172,101 +1078,30 @@ void Screen::setFrameImmediateDraw(FrameCallback *drawFrames)
     setFastFramerate();
 }
 
-void Screen::toggleFrameVisibility(const std::string &frameName)
-{
-#ifndef USE_EINK
-    if (frameName == "nodelist") {
-        hiddenFrames.nodelist = !hiddenFrames.nodelist;
-    }
-#endif
-#ifdef USE_EINK
-    if (frameName == "nodelist_lastheard") {
-        hiddenFrames.nodelist_lastheard = !hiddenFrames.nodelist_lastheard;
-    }
-    if (frameName == "nodelist_hopsignal") {
-        hiddenFrames.nodelist_hopsignal = !hiddenFrames.nodelist_hopsignal;
-    }
-    if (frameName == "nodelist_distance") {
-        hiddenFrames.nodelist_distance = !hiddenFrames.nodelist_distance;
-    }
-#endif
-#if HAS_GPS
-    if (frameName == "nodelist_bearings") {
-        hiddenFrames.nodelist_bearings = !hiddenFrames.nodelist_bearings;
-    }
-    if (frameName == "gps") {
-        hiddenFrames.gps = !hiddenFrames.gps;
-    }
-#endif
-    if (frameName == "lora") {
-        hiddenFrames.lora = !hiddenFrames.lora;
-    }
-    if (frameName == "clock") {
-        hiddenFrames.clock = !hiddenFrames.clock;
-    }
-    if (frameName == "show_favorites") {
-        hiddenFrames.show_favorites = !hiddenFrames.show_favorites;
-    }
-    if (frameName == "chirpy") {
-        hiddenFrames.chirpy = !hiddenFrames.chirpy;
-    }
-}
-
-bool Screen::isFrameHidden(const std::string &frameName) const
-{
-#ifndef USE_EINK
-    if (frameName == "nodelist")
-        return hiddenFrames.nodelist;
-#endif
-#ifdef USE_EINK
-    if (frameName == "nodelist_lastheard")
-        return hiddenFrames.nodelist_lastheard;
-    if (frameName == "nodelist_hopsignal")
-        return hiddenFrames.nodelist_hopsignal;
-    if (frameName == "nodelist_distance")
-        return hiddenFrames.nodelist_distance;
-#endif
-#if HAS_GPS
-    if (frameName == "nodelist_bearings")
-        return hiddenFrames.nodelist_bearings;
-    if (frameName == "gps")
-        return hiddenFrames.gps;
-#endif
-    if (frameName == "lora")
-        return hiddenFrames.lora;
-    if (frameName == "clock")
-        return hiddenFrames.clock;
-    if (frameName == "show_favorites")
-        return hiddenFrames.show_favorites;
-    if (frameName == "chirpy")
-        return hiddenFrames.chirpy;
-
-    return false;
-}
-
 // Dismisses the currently displayed screen frame, if possible
 // Relevant for text message, waypoint, others in future?
 // Triggered with a CardKB keycombo
-void Screen::hideCurrentFrame()
+void Screen::dismissCurrentFrame()
 {
     uint8_t currentFrame = ui->getUiState()->currentFrame;
     bool dismissed = false;
+
     if (currentFrame == framesetInfo.positions.textMessage && devicestate.has_rx_text_message) {
-        LOG_INFO("Hide Text Message");
+        LOG_INFO("Dismiss Text Message");
         devicestate.has_rx_text_message = false;
         memset(&devicestate.rx_text_message, 0, sizeof(devicestate.rx_text_message));
     } else if (currentFrame == framesetInfo.positions.waypoint && devicestate.has_rx_waypoint) {
-        LOG_DEBUG("Hide Waypoint");
+        LOG_DEBUG("Dismiss Waypoint");
         devicestate.has_rx_waypoint = false;
-        hiddenFrames.waypoint = true;
+        dismissedFrames.waypoint = true;
         dismissed = true;
     } else if (currentFrame == framesetInfo.positions.wifi) {
-        LOG_DEBUG("Hide WiFi Screen");
+        LOG_DEBUG("Dismiss WiFi Screen");
-        hiddenFrames.wifi = true;
+        dismissedFrames.wifi = true;
         dismissed = true;
-    } else if (currentFrame == framesetInfo.positions.lora) {
+    } else if (currentFrame == framesetInfo.positions.memory) {
-        LOG_INFO("Hide LoRa");
+        LOG_INFO("Dismiss Memory");
-        hiddenFrames.lora = true;
+        dismissedFrames.memory = true;
         dismissed = true;
     }
 
@@ -1299,8 +1134,7 @@ void Screen::blink()
         delay(50);
         count = count - 1;
     }
-    // The dispdev->setBrightness does not work for t-deck display, it seems to run the setBrightness function in
+    // The dispdev->setBrightness does not work for t-deck display, it seems to run the setBrightness function in OLEDDisplay.
-    // OLEDDisplay.
     dispdev->setBrightness(brightness);
 }
 
@@ -1388,10 +1222,6 @@ void Screen::handleShowNextFrame()
 
 void Screen::setFastFramerate()
 {
-#if defined(M5STACK_UNITC6L)
-    dispdev->clear();
-    dispdev->display();
-#endif
     // We are about to start a transition so speed up fps
     targetFramerate = SCREEN_TRANSITION_FRAMERATE;
 
@@ -1423,7 +1253,7 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             // Outgoing message (likely sent from phone)
             devicestate.has_rx_text_message = false;
             memset(&devicestate.rx_text_message, 0, sizeof(devicestate.rx_text_message));
-            hiddenFrames.textMessage = true;
+            dismissedFrames.textMessage = true;
             hasUnreadMessage = false; // Clear unread state when user replies
 
             setFrames(FOCUS_PRESERVE); // Stay on same frame, silently update frame list
@@ -1437,49 +1267,40 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             if (shouldWakeOnReceivedMessage()) {
                 setOn(true);    // Wake up the screen first
                 forceDisplay(); // Forces screen redraw
-            }
-            // === Prepare banner content ===
-            const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
-            const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;
 
-            const char *msgRaw = reinterpret_cast<const char *>(packet->decoded.payload.bytes);
+                // === Prepare banner content ===
+                const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
+                const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;
 
-            char banner[256];
+                const char *msgRaw = reinterpret_cast<const char *>(packet->decoded.payload.bytes);
 
-            // Check for bell character in message to determine alert type
+                char banner[256];
-            bool isAlert = false;
+
-            for (size_t i = 0; i < packet->decoded.payload.size && i < 100; i++) {
+                // Check for bell character in message to determine alert type
-                if (msgRaw[i] == '\x07') {
+                bool isAlert = false;
-                    isAlert = true;
+                for (size_t i = 0; i < packet->decoded.payload.size && i < 100; i++) {
-                    break;
+                    if (msgRaw[i] == '\x07') {
+                        isAlert = true;
+                        break;
+                    }
                 }
-            }
 
-            if (isAlert) {
+                if (isAlert) {
-                if (longName && longName[0]) {
+                    if (longName && longName[0]) {
-                    snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
+                        snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
+                    } else {
+                        strcpy(banner, "Alert Received");
+                    }
                 } else {
-                    strcpy(banner, "Alert Received");
+                    if (longName && longName[0]) {
+                        snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
+                    } else {
+                        strcpy(banner, "New Message");
+                    }
                 }
-            } else {
-                if (longName && longName[0]) {
-#if defined(M5STACK_UNITC6L)
-                    strcpy(banner, "New Message");
-#else
-                    snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
-#endif
 
-                } else {
+                screen->showSimpleBanner(banner, 3000);
-                    strcpy(banner, "New Message");
-                }
             }
-#if defined(M5STACK_UNITC6L)
-            screen->setOn(true);
-            screen->showSimpleBanner(banner, 1500);
-            playLongBeep();
-#else
-            screen->showSimpleBanner(banner, 3000);
-#endif
         }
     }
 
@@ -1489,11 +1310,6 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
 // Triggered by MeshModules
 int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 {
-    // Block UI frame events when virtual keyboard is active
-    if (NotificationRenderer::current_notification_type == notificationTypeEnum::text_input) {
-        return 0;
-    }
-
     if (showingNormalScreen) {
         // Regenerate the frameset, potentially honoring a module's internal requestFocus() call
         if (event->action == UIFrameEvent::Action::REGENERATE_FRAMESET)
@@ -1516,16 +1332,6 @@ int Screen::handleInputEvent(const InputEvent *event)
     if (!screenOn)
         return 0;
 
-    // Handle text input notifications specially - pass input to virtual keyboard
-    if (NotificationRenderer::current_notification_type == notificationTypeEnum::text_input) {
-        NotificationRenderer::inEvent = *event;
-        static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
-        ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
-        setFastFramerate(); // Draw ASAP
-        ui->update();
-        return 0;
-    }
-
 #ifdef USE_EINK // the screen is the last input handler, so if an event makes it here, we can assume it will prompt a screen draw.
     EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Use fast-refresh for next frame, no skip please
     EINK_ADD_FRAMEFLAG(dispdev, BLOCKING);    // Edge case: if this frame is promoted to COSMETIC, wait for update
@@ -1563,7 +1369,7 @@ int Screen::handleInputEvent(const InputEvent *event)
             } else if (event->inputEvent == INPUT_BROKER_SELECT) {
                 if (this->ui->getUiState()->currentFrame == framesetInfo.positions.home) {
                     menuHandler::homeBaseMenu();
-                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.system) {
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.memory) {
                     menuHandler::systemBaseMenu();
 #if HAS_GPS
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.gps && gps) {
@@ -1572,17 +1378,10 @@ int Screen::handleInputEvent(const InputEvent *event)
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.clock) {
                     menuHandler::clockMenu();
                 } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.lora) {
-                    menuHandler::loraMenu();
+                    menuHandler::LoraRegionPicker();
-                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage) {
+                } else if (this->ui->getUiState()->currentFrame == framesetInfo.positions.textMessage &&
-                    if (devicestate.rx_text_message.from) {
+                           devicestate.rx_text_message.from) {
-                        menuHandler::messageResponseMenu();
+                    menuHandler::messageResponseMenu();
-                    } else {
-#if defined(M5STACK_UNITC6L)
-                        menuHandler::textMessageMenu();
-#else
-                        menuHandler::textMessageBaseMenu();
-#endif
-                    }
                 } else if (framesetInfo.positions.firstFavorite != 255 &&
                            this->ui->getUiState()->currentFrame >= framesetInfo.positions.firstFavorite &&
                            this->ui->getUiState()->currentFrame <= framesetInfo.positions.lastFavorite) {
@@ -1640,15 +1439,13 @@ bool shouldWakeOnReceivedMessage()
     /*
     The goal here is to determine when we do NOT wake up the screen on message received:
     - Any ext. notifications are turned on
-    - If role is not CLIENT / CLIENT_MUTE / CLIENT_HIDDEN / CLIENT_BASE
+    - If role is not client / client_mute
     - If the battery level is very low
     */
     if (moduleConfig.external_notification.enabled) {
         return false;
     }
-    if (!IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_CLIENT,
+    if (!meshtastic_Config_DeviceConfig_Role_CLIENT && !meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE) {
-                   meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE, meshtastic_Config_DeviceConfig_Role_CLIENT_HIDDEN,
-                   meshtastic_Config_DeviceConfig_Role_CLIENT_BASE)) {
         return false;
     }
     if (powerStatus && powerStatus->getBatteryChargePercent() < 10) {

src/graphics/Screen.h

@@ -12,7 +12,7 @@
 #define getStringCenteredX(s) ((SCREEN_WIDTH - display->getStringWidth(s)) / 2)
 namespace graphics
 {
-enum notificationTypeEnum { none, text_banner, selection_picker, node_picker, number_picker, text_input };
+enum notificationTypeEnum { none, text_banner, selection_picker, node_picker, number_picker };
 
 struct BannerOverlayOptions {
     const char *message;
@@ -81,8 +81,6 @@ class Screen
 #include <SSD1306Wire.h>
 #elif defined(USE_ST7789)
 #include <ST7789Spi.h>
-#elif defined(USE_SPISSD1306)
-#include <SSD1306Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>
@@ -315,8 +313,6 @@ class Screen : public concurrency::OSThread
 
     void showNodePicker(const char *message, uint32_t durationMs, std::function<void(uint32_t)> bannerCallback);
     void showNumberPicker(const char *message, uint32_t durationMs, uint8_t digits, std::function<void(uint32_t)> bannerCallback);
-    void showTextInput(const char *header, const char *initialText, uint32_t durationMs,
-                       std::function<void(const std::string &)> textCallback);
 
     void requestMenu(graphics::menuHandler::screenMenus menuToShow)
     {
@@ -595,11 +591,7 @@ class Screen : public concurrency::OSThread
     void setSSLFrames();
 
     // Dismiss the currently focussed frame, if possible (e.g. text message, waypoint)
-    void hideCurrentFrame();
+    void dismissCurrentFrame();
-
-    // Menu-driven Show / Hide Toggle
-    void toggleFrameVisibility(const std::string &frameName);
-    bool isFrameHidden(const std::string &frameName) const;
 
 #ifdef USE_EINK
     /// Draw an image to remain on E-Ink display after screen off
@@ -661,7 +653,7 @@ class Screen : public concurrency::OSThread
             uint8_t settings = 255;
             uint8_t wifi = 255;
             uint8_t deviceFocused = 255;
-            uint8_t system = 255;
+            uint8_t memory = 255;
             uint8_t gps = 255;
             uint8_t home = 255;
             uint8_t textMessage = 255;
@@ -671,7 +663,6 @@ class Screen : public concurrency::OSThread
             uint8_t nodelist_distance = 255;
             uint8_t nodelist_bearings = 255;
             uint8_t clock = 255;
-            uint8_t chirpy = 255;
             uint8_t firstFavorite = 255;
             uint8_t lastFavorite = 255;
             uint8_t lora = 255;
@@ -680,29 +671,12 @@ class Screen : public concurrency::OSThread
         uint8_t frameCount = 0;
     } framesetInfo;
 
-    struct hiddenFrames {
+    struct DismissedFrames {
         bool textMessage = false;
         bool waypoint = false;
         bool wifi = false;
-        bool system = false;
+        bool memory = false;
-        bool home = false;
+    } dismissedFrames;
-        bool clock = false;
-#ifndef USE_EINK
-        bool nodelist = false;
-#endif
-#ifdef USE_EINK
-        bool nodelist_lastheard = false;
-        bool nodelist_hopsignal = false;
-        bool nodelist_distance = false;
-#endif
-#if HAS_GPS
-        bool nodelist_bearings = false;
-        bool gps = false;
-#endif
-        bool lora = false;
-        bool show_favorites = false;
-        bool chirpy = true;
-    } hiddenFrames;
 
     /// Try to start drawing ASAP
     void setFastFramerate();

src/graphics/ScreenFonts.h

@@ -16,7 +16,7 @@
 #include "graphics/fonts/OLEDDisplayFontsCS.h"
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#ifdef CROWPANEL_ESP32S3_5_EPAPER
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif
 
@@ -40,9 +40,6 @@
 #ifdef OLED_PL
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_PL // Height: 19
 #else
-#ifdef OLED_RU
-#define FONT_MEDIUM_LOCAL ArialMT_Plain_16_RU // Height: 19
-#else
 #ifdef OLED_UA
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_UA // Height: 19
 #else
@@ -53,13 +50,9 @@
 #endif
 #endif
 #endif
-#endif
 #ifdef OLED_PL
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_PL // Height: 28
 #else
-#ifdef OLED_RU
-#define FONT_LARGE_LOCAL ArialMT_Plain_24_RU // Height: 28
-#else
 #ifdef OLED_UA
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_UA // Height: 28
 #else
@@ -70,26 +63,21 @@
 #endif
 #endif
 #endif
-#endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS)) &&                                  \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
 #define FONT_MEDIUM FONT_LARGE_LOCAL // Height: 28
 #define FONT_LARGE FONT_LARGE_LOCAL  // Height: 28
-#elif defined(M5STACK_UNITC6L)
-#define FONT_SMALL FONT_SMALL_LOCAL  // Height: 13
-#define FONT_MEDIUM FONT_SMALL_LOCAL // Height: 13
-#define FONT_LARGE FONT_SMALL_LOCAL  // Height: 13
 #else
 #define FONT_SMALL FONT_SMALL_LOCAL   // Height: 13
 #define FONT_MEDIUM FONT_MEDIUM_LOCAL // Height: 19
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER)
 #undef FONT_SMALL
 #undef FONT_MEDIUM
 #undef FONT_LARGE

src/graphics/SharedUIDisplay.cpp

@@ -1,7 +1,6 @@
 #include "graphics/SharedUIDisplay.h"
 #include "RTC.h"
 #include "graphics/ScreenFonts.h"
-#include "graphics/draw/UIRenderer.h"
 #include "main.h"
 #include "meshtastic/config.pb.h"
 #include "power.h"
@@ -17,10 +16,6 @@ void determineResolution(int16_t screenheight, int16_t screenwidth)
         isHighResolution = true;
     }
 
-    if (screenwidth > 128 && screenheight <= 64) {
-        isHighResolution = false;
-    }
-
     // Special case for Heltec Wireless Tracker v1.1
     if (screenwidth == 160 && screenheight == 80) {
         isHighResolution = false;
@@ -58,7 +53,7 @@ void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w,
 // *************************
 // * Common Header Drawing *
 // *************************
-void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr, bool force_no_invert, bool show_date)
+void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr, bool battery_only)
 {
     constexpr int HEADER_OFFSET_Y = 1;
     y += HEADER_OFFSET_Y;
@@ -74,7 +69,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
     const int screenW = display->getWidth();
     const int screenH = display->getHeight();
 
-    if (!force_no_invert) {
+    if (!battery_only) {
         // === Inverted Header Background ===
         if (isInverted) {
             display->setColor(BLACK);
@@ -129,7 +124,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
 
     int batteryX = 1;
     int batteryY = HEADER_OFFSET_Y + 1;
-#if !defined(M5STACK_UNITC6L)
+
     // === Battery Icons ===
     if (usbPowered && !isCharging) { // This is a basic check to determine USB Powered is flagged but not charging
         batteryX += 1;
@@ -192,28 +187,13 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
     int timeStrWidth = display->getStringWidth("12:34"); // Default alignment
     int timeX = screenW - xOffset - timeStrWidth + 4;
 
-    if (rtc_sec > 0) {
+    if (rtc_sec > 0 && !battery_only) {
         // === Build Time String ===
         long hms = (rtc_sec % SEC_PER_DAY + SEC_PER_DAY) % SEC_PER_DAY;
         int hour = hms / SEC_PER_HOUR;
         int minute = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
         snprintf(timeStr, sizeof(timeStr), "%d:%02d", hour, minute);
 
-        // === Build Date String ===
-        char datetimeStr[25];
-        UIRenderer::formatDateTime(datetimeStr, sizeof(datetimeStr), rtc_sec, display, false);
-        char dateLine[40];
-
-        if (isHighResolution) {
-            snprintf(dateLine, sizeof(dateLine), "%s", datetimeStr);
-        } else {
-            if (hasUnreadMessage) {
-                snprintf(dateLine, sizeof(dateLine), "%s", &datetimeStr[5]);
-            } else {
-                snprintf(dateLine, sizeof(dateLine), "%s", &datetimeStr[2]);
-            }
-        }
-
         if (config.display.use_12h_clock) {
             bool isPM = hour >= 12;
             hour %= 12;
@@ -222,15 +202,11 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             snprintf(timeStr, sizeof(timeStr), "%d:%02d%s", hour, minute, isPM ? "p" : "a");
         }
 
-        if (show_date) {
+        timeStrWidth = display->getStringWidth(timeStr);
-            timeStrWidth = display->getStringWidth(dateLine);
-        } else {
-            timeStrWidth = display->getStringWidth(timeStr);
-        }
         timeX = screenW - xOffset - timeStrWidth + 3;
 
         // === Show Mail or Mute Icon to the Left of Time ===
-        int iconRightEdge = timeX - 2;
+        int iconRightEdge = timeX - 1;
 
         bool showMail = false;
 
@@ -253,7 +229,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
                 int iconW = 16, iconH = 12;
                 int iconX = iconRightEdge - iconW;
                 int iconY = textY + (FONT_HEIGHT_SMALL - iconH) / 2 - 1;
-                if (isInverted && !force_no_invert) {
+                if (isInverted) {
                     display->setColor(WHITE);
                     display->fillRect(iconX - 1, iconY - 1, iconW + 3, iconH + 2);
                     display->setColor(BLACK);
@@ -268,7 +244,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             } else {
                 int iconX = iconRightEdge - (mail_width - 2);
                 int iconY = textY + (FONT_HEIGHT_SMALL - mail_height) / 2;
-                if (isInverted && !force_no_invert) {
+                if (isInverted) {
                     display->setColor(WHITE);
                     display->fillRect(iconX - 1, iconY - 1, mail_width + 2, mail_height + 2);
                     display->setColor(BLACK);
@@ -311,17 +287,10 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             }
         }
 
-        if (show_date) {
+        // === Draw Time ===
-            // === Draw Date ===
+        display->drawString(timeX, textY, timeStr);
-            display->drawString(timeX, textY, dateLine);
+        if (isBold)
-            if (isBold)
+            display->drawString(timeX - 1, textY, timeStr);
-                display->drawString(timeX - 1, textY, dateLine);
-        } else {
-            // === Draw Time ===
-            display->drawString(timeX, textY, timeStr);
-            if (isBold)
-                display->drawString(timeX - 1, textY, timeStr);
-        }
 
     } else {
         // === No Time Available: Mail/Mute Icon Moves to Far Right ===
@@ -368,7 +337,7 @@ void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *ti
             }
         }
     }
-#endif
+
     display->setColor(WHITE); // Reset for other UI
 }
 

src/graphics/SharedUIDisplay.h

@@ -49,8 +49,7 @@ void determineResolution(int16_t screenheight, int16_t screenwidth);
 void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w, int16_t h, int16_t r);
 
 // Shared battery/time/mail header
-void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr = "", bool force_no_invert = false,
+void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr = "", bool battery_only = false);
-                      bool show_date = false);
 
 const int *getTextPositions(OLEDDisplay *display);
 

src/graphics/TFTDisplay.cpp

@@ -562,91 +562,6 @@ class LGFX : public lgfx::LGFX_Device
 
 static LGFX *tft = nullptr;
 
-#elif defined(ST7796_CS)
-#include <LovyanGFX.hpp> // Graphics and font library for ST7796 driver chip
-
-class LGFX : public lgfx::LGFX_Device
-{
-    lgfx::Panel_ST7796 _panel_instance;
-    lgfx::Bus_SPI _bus_instance;
-    lgfx::Light_PWM _light_instance;
-
-  public:
-    LGFX(void)
-    {
-        {
-            auto cfg = _bus_instance.config();
-
-            // SPI
-            cfg.spi_host = ST7796_SPI_HOST;
-            cfg.spi_mode = 0;
-            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
-                                            // 80MHz by an integer)
-            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
-            cfg.spi_3wire = false;
-            cfg.use_lock = true;               // Set to true to use transaction locking
-            cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
-                                               // SPI_DMA_CH_AUTO=auto setting)
-            cfg.pin_sclk = ST7796_SCK;         // Set SPI SCLK pin number
-            cfg.pin_mosi = ST7796_SDA;         // Set SPI MOSI pin number
-            cfg.pin_miso = ST7796_MISO;        // Set SPI MISO pin number (-1 = disable)
-            cfg.pin_dc = ST7796_RS;            // Set SPI DC pin number (-1 = disable)
-
-            _bus_instance.config(cfg);              // applies the set value to the bus.
-            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
-        }
-
-        {                                        // Set the display panel control.
-            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
-
-            cfg.pin_cs = ST7796_CS;     // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = ST7796_RESET; // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = ST7796_BUSY; // Pin number where BUSY is connected (-1 = disable)
-
-            // cfg.memory_width = TFT_WIDTH;              // Maximum width supported by the driver IC
-            // cfg.memory_height = TFT_HEIGHT;            // Maximum height supported by the driver IC
-            cfg.panel_width = TFT_WIDTH;                  // actual displayable width
-            cfg.panel_height = TFT_HEIGHT;                // actual displayable height
-            cfg.offset_x = TFT_OFFSET_X;                  // Panel offset amount in X direction
-            cfg.offset_y = TFT_OFFSET_Y;                  // Panel offset amount in Y direction
-            cfg.offset_rotation = TFT_OFFSET_ROTATION;    // Rotation direction value offset 0~7 (4~7 is mirrored)
-#ifdef TFT_DUMMY_READ_PIXELS
-            cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
-#else
-            cfg.dummy_read_pixel = 8; // Number of bits for dummy read before pixel readout
-#endif
-            cfg.dummy_read_bits = 1;                      // Number of bits for dummy read before non-pixel data read
-            cfg.readable = true;                          // Set to true if data can be read
-            cfg.invert = true;                            // Set to true if the light/darkness of the panel is reversed
-            cfg.rgb_order = false;                        // Set to true if the panel's red and blue are swapped
-            cfg.dlen_16bit =
-                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
-            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
-
-            _panel_instance.config(cfg);
-        }
-
-#ifdef ST7796_BL
-        // Set the backlight control. (delete if not necessary)
-        {
-            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
-
-            cfg.pin_bl = ST7796_BL; // Pin number to which the backlight is connected
-            cfg.invert = false;     // true to invert the brightness of the backlight
-            cfg.freq = 44100;
-            cfg.pwm_channel = 7;
-
-            _light_instance.config(cfg);
-            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
-        }
-#endif
-
-        setPanel(&_panel_instance); // Sets the panel to use.
-    }
-};
-
-static LGFX *tft = nullptr;
-
 #elif defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER)
 
 #include <LovyanGFX.hpp> // Graphics and font library for ILI9341/ILI9342 driver chip
@@ -752,42 +667,33 @@ static LGFX *tft = nullptr;
 static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
 #elif ARCH_PORTDUINO
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
-#if defined(LGFX_SDL)
-#include <lgfx/v1/platforms/sdl/Panel_sdl.hpp>
-#endif
 
 class LGFX : public lgfx::LGFX_Device
 {
+    lgfx::Panel_Device *_panel_instance;
     lgfx::Bus_SPI _bus_instance;
 
     lgfx::ITouch *_touch_instance;
 
   public:
-    lgfx::Panel_Device *_panel_instance;
-
     LGFX(void)
     {
-        if (portduino_config.displayPanel == st7789)
+        if (settingsMap[displayPanel] == st7789)
             _panel_instance = new lgfx::Panel_ST7789;
-        else if (portduino_config.displayPanel == st7735)
+        else if (settingsMap[displayPanel] == st7735)
             _panel_instance = new lgfx::Panel_ST7735;
-        else if (portduino_config.displayPanel == st7735s)
+        else if (settingsMap[displayPanel] == st7735s)
             _panel_instance = new lgfx::Panel_ST7735S;
-        else if (portduino_config.displayPanel == st7796)
+        else if (settingsMap[displayPanel] == st7796)
             _panel_instance = new lgfx::Panel_ST7796;
-        else if (portduino_config.displayPanel == ili9341)
+        else if (settingsMap[displayPanel] == ili9341)
             _panel_instance = new lgfx::Panel_ILI9341;
-        else if (portduino_config.displayPanel == ili9342)
+        else if (settingsMap[displayPanel] == ili9342)
             _panel_instance = new lgfx::Panel_ILI9342;
-        else if (portduino_config.displayPanel == ili9488)
+        else if (settingsMap[displayPanel] == ili9488)
             _panel_instance = new lgfx::Panel_ILI9488;
-        else if (portduino_config.displayPanel == hx8357d)
+        else if (settingsMap[displayPanel] == hx8357d)
             _panel_instance = new lgfx::Panel_HX8357D;
-#if defined(LGFX_SDL)
-        else if (portduino_config.displayPanel == x11) {
-            _panel_instance = new lgfx::Panel_sdl;
-        }
-#endif
         else {
             _panel_instance = new lgfx::Panel_NULL;
             LOG_ERROR("Unknown display panel configured!");
@@ -795,66 +701,60 @@ class LGFX : public lgfx::LGFX_Device
 
         auto buscfg = _bus_instance.config();
         buscfg.spi_mode = 0;
-        buscfg.spi_host = portduino_config.display_spi_dev_int;
+        buscfg.spi_host = settingsMap[displayspidev];
 
-        buscfg.pin_dc = portduino_config.displayDC.pin; // Set SPI DC pin number (-1 = disable)
+        buscfg.pin_dc = settingsMap[displayDC]; // Set SPI DC pin number (-1 = disable)
 
         _bus_instance.config(buscfg);            // applies the set value to the bus.
         _panel_instance->setBus(&_bus_instance); // set the bus on the panel.
 
         auto cfg = _panel_instance->config(); // Gets a structure for display panel settings.
-        LOG_DEBUG("Width: %d, Height: %d", portduino_config.displayWidth, portduino_config.displayHeight);
+        LOG_DEBUG("Width: %d, Height: %d", settingsMap[displayWidth], settingsMap[displayHeight]);
-        cfg.pin_cs = portduino_config.displayCS.pin; // Pin number where CS is connected (-1 = disable)
+        cfg.pin_cs = settingsMap[displayCS]; // Pin number where CS is connected (-1 = disable)
-        cfg.pin_rst = portduino_config.displayReset.pin;
+        cfg.pin_rst = settingsMap[displayReset];
-        if (portduino_config.displayRotate) {
+        if (settingsMap[displayRotate]) {
-            cfg.panel_width = portduino_config.displayHeight; // actual displayable width
+            cfg.panel_width = settingsMap[displayHeight]; // actual displayable width
-            cfg.panel_height = portduino_config.displayWidth; // actual displayable height
+            cfg.panel_height = settingsMap[displayWidth]; // actual displayable height
         } else {
-            cfg.panel_width = portduino_config.displayWidth;   // actual displayable width
+            cfg.panel_width = settingsMap[displayWidth];   // actual displayable width
-            cfg.panel_height = portduino_config.displayHeight; // actual displayable height
+            cfg.panel_height = settingsMap[displayHeight]; // actual displayable height
         }
-        cfg.offset_x = portduino_config.displayOffsetX;             // Panel offset amount in X direction
+        cfg.offset_x = settingsMap[displayOffsetX];             // Panel offset amount in X direction
-        cfg.offset_y = portduino_config.displayOffsetY;             // Panel offset amount in Y direction
+        cfg.offset_y = settingsMap[displayOffsetY];             // Panel offset amount in Y direction
-        cfg.offset_rotation = portduino_config.displayOffsetRotate; // Rotation direction value offset 0~7 (4~7 is mirrored)
+        cfg.offset_rotation = settingsMap[displayOffsetRotate]; // Rotation direction value offset 0~7 (4~7 is mirrored)
-        cfg.invert = portduino_config.displayInvert;                // Set to true if the light/darkness of the panel is reversed
+        cfg.invert = settingsMap[displayInvert];                // Set to true if the light/darkness of the panel is reversed
 
         _panel_instance->config(cfg);
 
         // Configure settings for touch  control.
-        if (portduino_config.touchscreenModule) {
+        if (settingsMap[touchscreenModule]) {
-            if (portduino_config.touchscreenModule == xpt2046) {
+            if (settingsMap[touchscreenModule] == xpt2046) {
                 _touch_instance = new lgfx::Touch_XPT2046;
-            } else if (portduino_config.touchscreenModule == stmpe610) {
+            } else if (settingsMap[touchscreenModule] == stmpe610) {
                 _touch_instance = new lgfx::Touch_STMPE610;
-            } else if (portduino_config.touchscreenModule == ft5x06) {
+            } else if (settingsMap[touchscreenModule] == ft5x06) {
                 _touch_instance = new lgfx::Touch_FT5x06;
             }
             auto touch_cfg = _touch_instance->config();
 
-            touch_cfg.pin_cs = portduino_config.touchscreenCS.pin;
+            touch_cfg.pin_cs = settingsMap[touchscreenCS];
             touch_cfg.x_min = 0;
-            touch_cfg.x_max = portduino_config.displayHeight - 1;
+            touch_cfg.x_max = settingsMap[displayHeight] - 1;
             touch_cfg.y_min = 0;
-            touch_cfg.y_max = portduino_config.displayWidth - 1;
+            touch_cfg.y_max = settingsMap[displayWidth] - 1;
-            touch_cfg.pin_int = portduino_config.touchscreenIRQ.pin;
+            touch_cfg.pin_int = settingsMap[touchscreenIRQ];
             touch_cfg.bus_shared = true;
-            touch_cfg.offset_rotation = portduino_config.touchscreenRotate;
+            touch_cfg.offset_rotation = settingsMap[touchscreenRotate];
-            if (portduino_config.touchscreenI2CAddr != -1) {
+            if (settingsMap[touchscreenI2CAddr] != -1) {
-                touch_cfg.i2c_addr = portduino_config.touchscreenI2CAddr;
+                touch_cfg.i2c_addr = settingsMap[touchscreenI2CAddr];
             } else {
-                touch_cfg.spi_host = portduino_config.touchscreen_spi_dev_int;
+                touch_cfg.spi_host = settingsMap[touchscreenspidev];
             }
 
             _touch_instance->config(touch_cfg);
             _panel_instance->setTouch(_touch_instance);
         }
-#if defined(LGFX_SDL)
+
-        if (portduino_config.displayPanel == x11) {
-            lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)_panel_instance;
-            sdl_panel_->setup();
-            sdl_panel_->addKeyCodeMapping(SDLK_RETURN, SDL_SCANCODE_KP_ENTER);
-        }
-#endif
         setPanel(_panel_instance); // Sets the panel to use.
     }
 };
@@ -949,29 +849,9 @@ static LGFX *tft = nullptr;
 #include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
 #include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
 
-class PanelInit_ST7701 : public lgfx::Panel_ST7701
-{
-  public:
-    const uint8_t *getInitCommands(uint8_t listno) const override
-    {
-        // 180 degree hw rotation: vertical flip, horizontal flip
-        static constexpr const uint8_t list1[] = {0x36, 1,   0x10,                         // MADCTL for vertical flip
-                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x10, // Command2 BK0 SEL
-                                                  0xC7, 1,   0x04, // SDIR: X-direction Control (Horizontal Flip)
-                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x00, // Command2 BK0 DIS
-                                                  0xFF, 0xFF};
-        switch (listno) {
-        case 1:
-            return list1;
-        default:
-            return lgfx::Panel_ST7701::getInitCommands(listno);
-        }
-    }
-};
-
 class LGFX : public lgfx::LGFX_Device
 {
-    PanelInit_ST7701 _panel_instance;
+    lgfx::Panel_ST7701 _panel_instance;
     lgfx::Bus_RGB _bus_instance;
     lgfx::Light_PWM _light_instance;
     lgfx::Touch_FT5x06 _touch_instance;
@@ -1082,9 +962,8 @@ static LGFX *tft = nullptr;
 
 #endif
 
-#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) ||           \
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||      \
-    defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) ||           \
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
-    (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -1115,10 +994,10 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
     backlightEnable = p;
 
 #if ARCH_PORTDUINO
-    if (portduino_config.displayRotate) {
+    if (settingsMap[displayRotate]) {
-        setGeometry(GEOMETRY_RAWMODE, portduino_config.displayWidth, portduino_config.displayWidth);
+        setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayWidth], settingsMap[configNames::displayHeight]);
     } else {
-        setGeometry(GEOMETRY_RAWMODE, portduino_config.displayHeight, portduino_config.displayHeight);
+        setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayHeight], settingsMap[configNames::displayWidth]);
     }
 
 #elif defined(SCREEN_ROTATE)
@@ -1128,154 +1007,37 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
 #endif
 }
 
-TFTDisplay::~TFTDisplay()
-{
-    // Clean up allocated line pixel buffer to prevent memory leak
-    if (linePixelBuffer != nullptr) {
-        free(linePixelBuffer);
-        linePixelBuffer = nullptr;
-    }
-}
-
 // Write the buffer to the display memory
 void TFTDisplay::display(bool fromBlank)
 {
     if (fromBlank)
         tft->fillScreen(TFT_BLACK);
-
+    // tft->clear();
     concurrency::LockGuard g(spiLock);
 
-    uint32_t x, y;
+    uint16_t x, y;
-    uint32_t y_byteIndex;
-    uint8_t y_byteMask;
-    uint32_t x_FirstPixelUpdate;
-    uint32_t x_LastPixelUpdate;
-    bool isset, dblbuf_isset;
-    uint16_t colorTftMesh, colorTftBlack;
-    bool somethingChanged = false;
 
-    // Store colors byte-reversed so that TFT_eSPI doesn't have to swap bytes in a separate step
+    for (y = 0; y < displayHeight; y++) {
-    colorTftMesh = (TFT_MESH >> 8) | ((TFT_MESH & 0xFF) << 8);
+        for (x = 0; x < displayWidth; x++) {
-    colorTftBlack = (TFT_BLACK >> 8) | ((TFT_BLACK & 0xFF) << 8);
+            auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
-
-    y = 0;
-    while (y < displayHeight) {
-        y_byteIndex = (y / 8) * displayWidth;
-        y_byteMask = (1 << (y & 7));
-
-        // Step 1: Do a quick scan of 8 rows together. This allows fast-forwarding over unchanged screen areas.
-        if (y_byteMask == 1) {
             if (!fromBlank) {
-                for (x = 0; x < displayWidth; x++) {
+                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
-                    if (buffer[x + y_byteIndex] != buffer_back[x + y_byteIndex])
+                auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
-                        break;
-                }
-            } else {
-                for (x = 0; x < displayWidth; x++) {
-                    if (buffer[x + y_byteIndex] != 0)
-                        break;
-                }
-            }
-            if (x >= displayWidth) {
-                // No changed pixels found in these 8 rows, fast-forward to the next 8
-                y = y + 8;
-                continue;
-            }
-        }
-
-        // Step 2: Scan each of the 8 rows individually. Find the first pixel in each row that needs updating
-        for (x_FirstPixelUpdate = 0; x_FirstPixelUpdate < displayWidth; x_FirstPixelUpdate++) {
-            isset = buffer[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
-
-            if (!fromBlank) {
-                // get src pixel in the page based ordering the OLED lib uses
-                dblbuf_isset = buffer_back[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
                 if (isset != dblbuf_isset) {
-                    break;
+                    tft->drawPixel(x, y, isset ? TFT_MESH : TFT_BLACK);
                 }
             } else if (isset) {
-                break;
+                tft->drawPixel(x, y, TFT_MESH);
             }
         }
-
-        // Did we find a pixel that needs updating on this row?
-        if (x_FirstPixelUpdate < displayWidth) {
-
-            // Quickly write out the first changed pixel (saves another array lookup)
-            linePixelBuffer[x_FirstPixelUpdate] = isset ? colorTftMesh : colorTftBlack;
-            x_LastPixelUpdate = x_FirstPixelUpdate;
-
-            // Step 3: copy all remaining pixels in this row into the pixel line buffer,
-            // while also recording the last pixel in the row that needs updating
-            for (x = x_FirstPixelUpdate + 1; x < displayWidth; x++) {
-                isset = buffer[x + y_byteIndex] & y_byteMask;
-                linePixelBuffer[x] = isset ? colorTftMesh : colorTftBlack;
-
-                if (!fromBlank) {
-                    dblbuf_isset = buffer_back[x + y_byteIndex] & y_byteMask;
-                    if (isset != dblbuf_isset) {
-                        x_LastPixelUpdate = x;
-                    }
-                } else if (isset) {
-                    x_LastPixelUpdate = x;
-                }
-            }
-
-            // Step 4: Send the changed pixels on this line to the screen as a single block transfer.
-            // This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
-            tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
-                          &linePixelBuffer[x_FirstPixelUpdate]);
-
-            somethingChanged = true;
-        }
-        y++;
     }
     // Copy the Buffer to the Back Buffer
-    if (somethingChanged)
+    for (y = 0; y < (displayHeight / 8); y++) {
-        memcpy(buffer_back, buffer, displayBufferSize);
+        for (x = 0; x < displayWidth; x++) {
-}
+            uint16_t pos = x + y * displayWidth;
-
+            buffer_back[pos] = buffer[pos];
-void TFTDisplay::sdlLoop()
-{
-#if defined(LGFX_SDL)
-    static int lastPressed = 0;
-    static int shuttingDown = false;
-    if (portduino_config.displayPanel == x11) {
-        lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)tft->_panel_instance;
-        if (sdl_panel_->loop() && !shuttingDown) {
-            LOG_WARN("Window Closed!");
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SHUTDOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        }
-
-        // debounce
-        if (lastPressed != 0 && !lgfx::v1::gpio_in(lastPressed))
-            return;
-        if (!lgfx::v1::gpio_in(37)) {
-            lastPressed = 37;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_RIGHT, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(36)) {
-            lastPressed = 36;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_UP, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(38)) {
-            lastPressed = 38;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_DOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(39)) {
-            lastPressed = 39;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_LEFT, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else if (!lgfx::v1::gpio_in(SDL_SCANCODE_KP_ENTER)) {
-            lastPressed = SDL_SCANCODE_KP_ENTER;
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SELECT, .kbchar = 0, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        } else {
-            lastPressed = 0;
         }
     }
-#endif
 }
 
 // Send a command to the display (low level function)
@@ -1288,8 +1050,8 @@ void TFTDisplay::sendCommand(uint8_t com)
         backlightEnable->set(true);
 #if ARCH_PORTDUINO
         display(true);
-        if (portduino_config.displayBacklight.pin > 0)
+        if (settingsMap[displayBacklight] > 0)
-            digitalWrite(portduino_config.displayBacklight.pin, TFT_BACKLIGHT_ON);
+            digitalWrite(settingsMap[displayBacklight], TFT_BACKLIGHT_ON);
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->wakeup();
         tft->powerSaveOff();
@@ -1312,8 +1074,8 @@ void TFTDisplay::sendCommand(uint8_t com)
         backlightEnable->set(false);
 #if ARCH_PORTDUINO
         tft->clear();
-        if (portduino_config.displayBacklight.pin > 0)
+        if (settingsMap[displayBacklight] > 0)
-            digitalWrite(portduino_config.displayBacklight.pin, !TFT_BACKLIGHT_ON);
+            digitalWrite(settingsMap[displayBacklight], !TFT_BACKLIGHT_ON);
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->sleep();
         tft->powerSaveOn();
@@ -1422,23 +1184,15 @@ bool TFTDisplay::connect()
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
 #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
     tft->setRotation(1); // T-Deck has the TFT in landscape
-#elif defined(T_WATCH_S3)
+#elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
-#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER)
+#elif ARCH_PORTDUINO
     tft->setRotation(0); // use config.yaml to set rotation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
 #endif
     tft->fillScreen(TFT_BLACK);
 
-    if (this->linePixelBuffer == NULL) {
-        this->linePixelBuffer = (uint16_t *)malloc(sizeof(uint16_t) * displayWidth);
-
-        if (!this->linePixelBuffer) {
-            LOG_ERROR("Not enough memory to create TFT line buffer\n");
-            return false;
-        }
-    }
     return true;
 }
 

src/graphics/TFTDisplay.h

@@ -20,13 +20,9 @@ class TFTDisplay : public OLEDDisplay
     */
     TFTDisplay(uint8_t, int, int, OLEDDISPLAY_GEOMETRY, HW_I2C);
 
-    // Destructor to clean up allocated memory
-    ~TFTDisplay();
-
     // Write the buffer to the display memory
     virtual void display() override { display(false); };
     virtual void display(bool fromBlank);
-    void sdlLoop();
 
     // Turn the display upside down
     virtual void flipScreenVertically();
@@ -61,6 +57,4 @@ class TFTDisplay : public OLEDDisplay
 
     // Connect to the display
     virtual bool connect() override;
-
-    uint16_t *linePixelBuffer = nullptr;
 };

src/graphics/VirtualKeyboard.cpp

@@ -1,738 +0,0 @@
-#include "VirtualKeyboard.h"
-#include "configuration.h"
-#include "graphics/Screen.h"
-#include "graphics/ScreenFonts.h"
-#include "graphics/SharedUIDisplay.h"
-#include "main.h"
-#include <Arduino.h>
-#include <vector>
-
-namespace graphics
-{
-
-VirtualKeyboard::VirtualKeyboard() : cursorRow(0), cursorCol(0), lastActivityTime(millis())
-{
-    initializeKeyboard();
-    // Set cursor to H(2, 5)
-    cursorRow = 2;
-    cursorCol = 5;
-}
-
-VirtualKeyboard::~VirtualKeyboard() {}
-
-void VirtualKeyboard::initializeKeyboard()
-{
-    // New 4 row, 11 column keyboard layout:
-    static const char LAYOUT[KEYBOARD_ROWS][KEYBOARD_COLS] = {{'1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '\b'},
-                                                              {'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', 'o', 'p', '\n'},
-                                                              {'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', ';', ' '},
-                                                              {'z', 'x', 'c', 'v', 'b', 'n', 'm', '.', ',', '?', '\x1b'}};
-
-    // Derive layout dimensions and assert they match the configured keyboard grid
-    constexpr int LAYOUT_ROWS = (int)(sizeof(LAYOUT) / sizeof(LAYOUT[0]));
-    constexpr int LAYOUT_COLS = (int)(sizeof(LAYOUT[0]) / sizeof(LAYOUT[0][0]));
-    static_assert(LAYOUT_ROWS == KEYBOARD_ROWS, "LAYOUT rows must equal KEYBOARD_ROWS");
-    static_assert(LAYOUT_COLS == KEYBOARD_COLS, "LAYOUT cols must equal KEYBOARD_COLS");
-
-    // Initialize all keys to empty first
-    for (int row = 0; row < LAYOUT_ROWS; row++) {
-        for (int col = 0; col < LAYOUT_COLS; col++) {
-            keyboard[row][col] = {0, VK_CHAR, 0, 0, 0, 0};
-        }
-    }
-
-    // Fill keyboard from the 2D layout
-    for (int row = 0; row < LAYOUT_ROWS; row++) {
-        for (int col = 0; col < LAYOUT_COLS; col++) {
-            char ch = LAYOUT[row][col];
-            // No empty slots in the simplified layout
-
-            VirtualKeyType type = VK_CHAR;
-            if (ch == '\b') {
-                type = VK_BACKSPACE;
-            } else if (ch == '\n') {
-                type = VK_ENTER;
-            } else if (ch == '\x1b') { // ESC
-                type = VK_ESC;
-            } else if (ch == ' ') {
-                type = VK_SPACE;
-            }
-
-            // Make action keys wider to fit text while keeping the last column aligned
-            uint8_t width = (type == VK_BACKSPACE || type == VK_ENTER || type == VK_SPACE) ? (KEY_WIDTH * 3) : KEY_WIDTH;
-            keyboard[row][col] = {ch, type, (uint8_t)(col * KEY_WIDTH), (uint8_t)(row * KEY_HEIGHT), width, KEY_HEIGHT};
-        }
-    }
-}
-
-void VirtualKeyboard::draw(OLEDDisplay *display, int16_t offsetX, int16_t offsetY)
-{
-    // Repeat ticking is driven by NotificationRenderer once per frame
-    // Base styles
-    display->setColor(WHITE);
-    display->setFont(FONT_SMALL);
-
-    // Screen geometry
-    const int screenW = display->getWidth();
-    const int screenH = display->getHeight();
-
-    // Decide wide-screen mode: if there is comfortable width, allow taller keys and reserve fixed width for last column labels
-    // Heuristic: if screen width >= 200px (e.g., 240x135), treat as wide
-    const bool isWide = screenW >= 200;
-
-    // Determine last-column label max width
-    display->setFont(FONT_SMALL);
-    const int wENTER = display->getStringWidth("ENTER");
-    int lastColLabelW = wENTER; // ENTER is usually the widest
-    // Smaller padding on very small screens to avoid excessive whitespace
-    const int lastColPad = (screenW <= 128 ? 2 : 6);
-    const int reservedLastColW = lastColLabelW + lastColPad; // reserved width for last column keys
-
-    // Always reserve width for the rightmost text column to avoid overlap on small screens
-    int cellW = 0;
-    int leftoverW = 0;
-    {
-        const int leftCols = KEYBOARD_COLS - 1; // 10 input characters
-        int usableW = screenW - reservedLastColW;
-        if (usableW < leftCols) {
-            // Guard: ensure at least 1px per left cell if labels are extremely wide (unlikely)
-            usableW = leftCols;
-        }
-        cellW = usableW / leftCols;
-        leftoverW = usableW - cellW * leftCols; // distribute extra pixels over left columns (left to right)
-    }
-
-    // Dynamic key geometry
-    int cellH = KEY_HEIGHT;
-    int keyboardStartY = 0;
-    if (screenH <= 64) {
-        const int headerHeight = headerText.empty() ? 0 : (FONT_HEIGHT_SMALL - 2);
-        const int gapBelowHeader = 0;
-        const int singleLineBoxHeight = FONT_HEIGHT_SMALL;
-        const int gapAboveKeyboard = 0;
-        keyboardStartY = offsetY + headerHeight + gapBelowHeader + singleLineBoxHeight + gapAboveKeyboard;
-        if (keyboardStartY < 0)
-            keyboardStartY = 0;
-        if (keyboardStartY > screenH)
-            keyboardStartY = screenH;
-        int keyboardHeight = screenH - keyboardStartY;
-        cellH = std::max(1, keyboardHeight / KEYBOARD_ROWS);
-    } else if (isWide) {
-        // For wide screens (e.g., T114 240x135), prefer square keys: height equals left-column key width.
-        cellH = std::max((int)KEY_HEIGHT, cellW);
-
-        // Guarantee at least 2 lines of input are visible by reducing cell height minimally if needed.
-        // Replicate the spacing used in drawInputArea(): headerGap=1, box-to-header gap=1, gap above keyboard=1
-        display->setFont(FONT_SMALL);
-        const int headerHeight = headerText.empty() ? 0 : (FONT_HEIGHT_SMALL + 1);
-        const int headerToBoxGap = 1;
-        const int gapAboveKb = 1;
-        const int minBoxHeightForTwoLines = 2 * FONT_HEIGHT_SMALL + 2; // inner 1px top/bottom
-        int maxKeyboardHeight = screenH - (offsetY + headerHeight + headerToBoxGap + minBoxHeightForTwoLines + gapAboveKb);
-        int maxCellHAllowed = maxKeyboardHeight / KEYBOARD_ROWS;
-        if (maxCellHAllowed < (int)KEY_HEIGHT)
-            maxCellHAllowed = KEY_HEIGHT;
-        if (maxCellHAllowed > 0 && cellH > maxCellHAllowed) {
-            cellH = maxCellHAllowed;
-        }
-        // Keyboard placement from bottom for wide screens
-        int keyboardHeight = KEYBOARD_ROWS * cellH;
-        keyboardStartY = screenH - keyboardHeight;
-        if (keyboardStartY < 0)
-            keyboardStartY = 0;
-    } else {
-        // Default (non-wide, non-64px) behavior: use key height heuristic and place at bottom
-        cellH = KEY_HEIGHT;
-        int keyboardHeight = KEYBOARD_ROWS * cellH;
-        keyboardStartY = screenH - keyboardHeight;
-        if (keyboardStartY < 0)
-            keyboardStartY = 0;
-    }
-
-    // Draw input area above keyboard
-    drawInputArea(display, offsetX, offsetY, keyboardStartY);
-
-    // Precompute per-column x and width with leftover distributed over left columns for even spacing
-    int colX[KEYBOARD_COLS];
-    int colW[KEYBOARD_COLS];
-    int runningX = offsetX;
-    for (int col = 0; col < KEYBOARD_COLS - 1; ++col) {
-        int wcol = cellW + (col < leftoverW ? 1 : 0);
-        colX[col] = runningX;
-        colW[col] = wcol;
-        runningX += wcol;
-    }
-    // Last column
-    colX[KEYBOARD_COLS - 1] = runningX;
-    colW[KEYBOARD_COLS - 1] = reservedLastColW;
-
-    // Draw keyboard grid
-    for (int row = 0; row < KEYBOARD_ROWS; row++) {
-        for (int col = 0; col < KEYBOARD_COLS; col++) {
-            const VirtualKey &k = keyboard[row][col];
-            if (k.character != 0 || k.type != VK_CHAR) {
-                const bool isLastCol = (col == KEYBOARD_COLS - 1);
-                int x = colX[col];
-                int w = colW[col];
-                int y = offsetY + keyboardStartY + row * cellH;
-                int h = cellH;
-                bool selected = (row == cursorRow && col == cursorCol);
-                drawKey(display, k, selected, x, y, (uint8_t)w, (uint8_t)h, isLastCol);
-            }
-        }
-    }
-}
-
-void VirtualKeyboard::drawInputArea(OLEDDisplay *display, int16_t offsetX, int16_t offsetY, int16_t keyboardStartY)
-{
-    display->setColor(WHITE);
-
-    const int screenWidth = display->getWidth();
-    const int screenHeight = display->getHeight();
-    // Use the standard small font metrics for input box sizing (restore original size)
-    const int inputLineH = FONT_HEIGHT_SMALL;
-
-    // Header uses the standard small (which may be larger on big screens)
-    display->setFont(FONT_SMALL);
-    int headerHeight = 0;
-    if (!headerText.empty()) {
-        // Draw header and reserve exact font height (plus a tighter gap) to maximize input area
-        display->drawString(offsetX + 2, offsetY, headerText.c_str());
-        if (screenHeight <= 64) {
-            headerHeight = FONT_HEIGHT_SMALL - 2; // 11px
-        } else {
-            headerHeight = FONT_HEIGHT_SMALL; // no extra padding baked in
-        }
-    }
-
-    const int boxX = offsetX;
-    const int boxWidth = screenWidth;
-    int boxY;
-    int boxHeight;
-    if (screenHeight <= 64) {
-        const int gapBelowHeader = 0;
-        const int fixedBoxHeight = inputLineH;
-        const int gapAboveKeyboard = 0;
-        boxY = offsetY + headerHeight + gapBelowHeader;
-        boxHeight = fixedBoxHeight;
-        if (boxY + boxHeight + gapAboveKeyboard > keyboardStartY) {
-            int over = boxY + boxHeight + gapAboveKeyboard - keyboardStartY;
-            boxHeight = std::max(1, fixedBoxHeight - over);
-        }
-    } else {
-        const int gapBelowHeader = 1;
-        int gapAboveKeyboard = 1;
-        int tmpBoxY = offsetY + headerHeight + gapBelowHeader;
-        const int minBoxHeight = inputLineH + 2;
-        int availableH = keyboardStartY - tmpBoxY - gapAboveKeyboard;
-        if (availableH < minBoxHeight)
-            availableH = minBoxHeight;
-        boxY = tmpBoxY;
-        boxHeight = availableH;
-    }
-
-    // Draw box border
-    display->drawRect(boxX, boxY, boxWidth, boxHeight);
-
-    display->setFont(FONT_SMALL);
-
-    // Text rendering: multi-line if space allows (>= 2 lines), else single-line with leading ellipsis
-    const int textX = boxX + 2;
-    const int maxTextWidth = boxWidth - 4;
-    const int maxLines = (boxHeight - 2) / inputLineH;
-    if (maxLines >= 2) {
-        // Inner bounds for caret clamping
-        const int innerLeft = boxX + 1;
-        const int innerRight = boxX + boxWidth - 2;
-        const int innerTop = boxY + 1;
-        const int innerBottom = boxY + boxHeight - 2;
-
-        // Wrap text greedily into lines that fit maxTextWidth
-        std::vector<std::string> lines;
-        {
-            std::string remaining = inputText;
-            while (!remaining.empty()) {
-                int bestLen = 0;
-                for (int len = 1; len <= (int)remaining.size(); ++len) {
-                    int w = display->getStringWidth(remaining.substr(0, len).c_str());
-                    if (w <= maxTextWidth)
-                        bestLen = len;
-                    else
-                        break;
-                }
-                if (bestLen == 0) {
-                    // At least show one character to make progress
-                    bestLen = 1;
-                }
-                lines.emplace_back(remaining.substr(0, bestLen));
-                remaining.erase(0, bestLen);
-            }
-        }
-
-        const bool scrolledUp = ((int)lines.size() > maxLines);
-        int caretX = textX;
-        int caretY = innerTop;
-
-        // Leave a small top gap to render '...' without replacing the first line
-        const int topInset = 2;
-        const int lineStep = std::max(1, inputLineH - 1); // slightly tighter than font height
-        int lineY = innerTop + topInset;
-
-        if (scrolledUp) {
-            // Draw three small dots centered horizontally, vertically at the midpoint of the gap
-            // between the inner top and the first line's top baseline. This avoids using a tall glyph.
-            const int firstLineTop = lineY;                                   // baseline top for the first visible line
-            const int gapMidY = innerTop + (firstLineTop - innerTop) / 2 + 1; // shift down 1px as requested
-            const int centerX = boxX + boxWidth / 2;
-            const int dotSpacing = 3; // px between dots
-            const int dotSize = 1;    // small square dot
-            display->fillRect(centerX - dotSpacing, gapMidY, dotSize, dotSize);
-            display->fillRect(centerX, gapMidY, dotSize, dotSize);
-            display->fillRect(centerX + dotSpacing, gapMidY, dotSize, dotSize);
-        }
-
-        // How many lines fit with our top inset and tighter step
-        const int linesCapacity = std::max(1, (innerBottom - lineY + 1) / lineStep);
-        const int linesToShow = std::min((int)lines.size(), linesCapacity);
-        const int startIndex = scrolledUp ? ((int)lines.size() - linesToShow) : 0;
-
-        for (int i = 0; i < linesToShow; ++i) {
-            const std::string &chunk = lines[startIndex + i];
-            display->drawString(textX, lineY, chunk.c_str());
-            caretX = textX + display->getStringWidth(chunk.c_str());
-            caretY = lineY;
-            lineY += lineStep;
-        }
-
-        // Draw caret at end of the last visible line
-        int caretPadY = 2;
-        if (boxHeight >= inputLineH + 4)
-            caretPadY = 3;
-        int cursorTop = caretY + caretPadY;
-        // Use lineStep so caret height matches the row spacing
-        int cursorH = lineStep - caretPadY * 2;
-        if (cursorH < 1)
-            cursorH = 1;
-        // Clamp vertical bounds to stay inside the inner rect
-        if (cursorTop < innerTop)
-            cursorTop = innerTop;
-        if (cursorTop + cursorH - 1 > innerBottom)
-            cursorH = innerBottom - cursorTop + 1;
-        if (cursorH < 1)
-            cursorH = 1;
-        // Only draw if cursor is inside inner bounds
-        if (caretX >= innerLeft && caretX <= innerRight) {
-            display->drawVerticalLine(caretX, cursorTop, cursorH);
-        }
-    } else {
-        std::string displayText = inputText;
-        int textW = display->getStringWidth(displayText.c_str());
-        std::string scrolled = displayText;
-        if (textW > maxTextWidth) {
-            // Trim from the left until it fits
-            while (textW > maxTextWidth && !scrolled.empty()) {
-                scrolled.erase(0, 1);
-                textW = display->getStringWidth(scrolled.c_str());
-            }
-            // Add leading ellipsis and ensure it still fits
-            if (scrolled != displayText) {
-                scrolled = "..." + scrolled;
-                textW = display->getStringWidth(scrolled.c_str());
-                // If adding ellipsis causes overflow, trim more after the ellipsis
-                while (textW > maxTextWidth && scrolled.size() > 3) {
-                    scrolled.erase(3, 1); // remove chars after the ellipsis
-                    textW = display->getStringWidth(scrolled.c_str());
-                }
-            }
-        } else {
-            // Keep textW in sync with what we draw
-            textW = display->getStringWidth(scrolled.c_str());
-        }
-
-        int textY;
-        if (screenHeight <= 64) {
-            textY = boxY + (boxHeight - inputLineH) / 2;
-        } else {
-            const int innerLeft = boxX + 1;
-            const int innerRight = boxX + boxWidth - 2;
-            const int innerTop = boxY + 1;
-            const int innerBottom = boxY + boxHeight - 2;
-
-            // Center text vertically within inner box for single-line, then clamp so it never overlaps borders
-            int innerH = innerBottom - innerTop + 1;
-            textY = innerTop + std::max(0, (innerH - inputLineH) / 2);
-            // Clamp fully inside the inner rect
-            if (textY < innerTop)
-                textY = innerTop;
-            int maxTop = innerBottom - inputLineH + 1;
-            if (textY > maxTop)
-                textY = maxTop;
-        }
-
-        if (!scrolled.empty()) {
-            display->drawString(textX, textY, scrolled.c_str());
-        }
-
-        int cursorX = textX + textW;
-        if (screenHeight > 64) {
-            const int innerRight = boxX + boxWidth - 2;
-            if (cursorX > innerRight)
-                cursorX = innerRight;
-        }
-
-        int cursorTop, cursorH;
-        if (screenHeight <= 64) {
-            cursorH = 10;
-            cursorTop = boxY + (boxHeight - cursorH) / 2;
-        } else {
-            const int innerLeft = boxX + 1;
-            const int innerRight = boxX + boxWidth - 2;
-            const int innerTop = boxY + 1;
-            const int innerBottom = boxY + boxHeight - 2;
-
-            cursorTop = boxY + 2;
-            cursorH = boxHeight - 4;
-            if (cursorH < 1)
-                cursorH = 1;
-            if (cursorTop < innerTop)
-                cursorTop = innerTop;
-            if (cursorTop + cursorH - 1 > innerBottom)
-                cursorH = innerBottom - cursorTop + 1;
-            if (cursorH < 1)
-                cursorH = 1;
-
-            if (cursorX < innerLeft || cursorX > innerRight)
-                return;
-        }
-
-        display->drawVerticalLine(cursorX, cursorTop, cursorH);
-    }
-}
-
-void VirtualKeyboard::drawKey(OLEDDisplay *display, const VirtualKey &key, bool selected, int16_t x, int16_t y, uint8_t width,
-                              uint8_t height, bool isLastCol)
-{
-    // Draw key content
-    display->setFont(FONT_SMALL);
-    const int fontH = FONT_HEIGHT_SMALL;
-    // Build label and metrics first
-    std::string keyText;
-    if (key.type == VK_BACKSPACE || key.type == VK_ENTER || key.type == VK_SPACE || key.type == VK_ESC) {
-        // Keep literal text labels for the action keys on the rightmost column
-        keyText = (key.type == VK_BACKSPACE) ? "BACK"
-                  : (key.type == VK_ENTER)   ? "ENTER"
-                  : (key.type == VK_SPACE)   ? "SPACE"
-                  : (key.type == VK_ESC)     ? "ESC"
-                                             : "";
-    } else {
-        char c = getCharForKey(key, false);
-        if (c >= 'a' && c <= 'z') {
-            c = c - 'a' + 'A';
-        }
-        keyText = (key.character == ' ' || key.character == '_') ? "_" : std::string(1, c);
-    }
-
-    int textWidth = display->getStringWidth(keyText.c_str());
-    // Label alignment
-    // - Rightmost action column: right-align text with a small right padding (~2px) so it hugs screen edge neatly.
-    // - Other keys: center horizontally; use ceil-style rounding to avoid appearing left-biased on odd widths.
-    int textX;
-    if (isLastCol) {
-        const int rightPad = 1;
-        textX = x + width - textWidth - rightPad;
-        if (textX < x)
-            textX = x; // guard
-    } else {
-        if (display->getHeight() <= 64 && (key.character >= '0' && key.character <= '9')) {
-            textX = x + (width - textWidth + 1) / 2;
-        } else {
-            textX = x + (width - textWidth) / 2;
-        }
-    }
-    int contentTop = y;
-    int contentH = height;
-    if (selected) {
-        display->setColor(WHITE);
-        bool isAction = (key.type == VK_BACKSPACE || key.type == VK_ENTER || key.type == VK_SPACE || key.type == VK_ESC);
-
-        if (display->getHeight() <= 64 && !isAction) {
-            display->fillRect(x, y, width, height);
-        } else if (isAction) {
-            const int padX = 1;
-            const int padY = 2;
-            int hlW = textWidth + padX * 2;
-            int hlX = textX - padX;
-
-            if (hlX < x) {
-                hlW -= (x - hlX);
-                hlX = x;
-            }
-            int maxW = (x + width) - hlX;
-            if (hlW > maxW)
-                hlW = maxW;
-            if (hlW < 1)
-                hlW = 1;
-
-            int hlH = std::min(fontH + padY * 2, (int)height);
-            int hlY = y + (height - hlH) / 2;
-            display->fillRect(hlX, hlY, hlW, hlH);
-            contentTop = hlY;
-            contentH = hlH;
-        } else {
-            display->fillRect(x, y, width, height);
-        }
-        display->setColor(BLACK);
-    } else {
-        display->setColor(WHITE);
-    }
-
-    int centeredTextY;
-    if (display->getHeight() <= 64) {
-        centeredTextY = y + (height - fontH) / 2;
-    } else {
-        centeredTextY = contentTop + (contentH - fontH) / 2;
-    }
-    if (display->getHeight() > 64) {
-        if (centeredTextY < contentTop)
-            centeredTextY = contentTop;
-        if (centeredTextY + fontH > contentTop + contentH)
-            centeredTextY = std::max(contentTop, contentTop + contentH - fontH);
-    }
-
-    if (display->getHeight() <= 64 && keyText.size() == 1) {
-        char ch = keyText[0];
-        if (ch == '.' || ch == ',' || ch == ';') {
-            centeredTextY -= 1;
-        }
-    }
-    display->drawString(textX, centeredTextY, keyText.c_str());
-}
-
-char VirtualKeyboard::getCharForKey(const VirtualKey &key, bool isLongPress)
-{
-    if (key.type != VK_CHAR) {
-        return key.character;
-    }
-
-    char c = key.character;
-
-    // Long-press: only keep letter lowercase->uppercase conversion; remove other symbol mappings
-    if (isLongPress && c >= 'a' && c <= 'z') {
-        c = (char)(c - 'a' + 'A');
-    }
-
-    return c;
-}
-
-void VirtualKeyboard::moveCursorDelta(int dRow, int dCol)
-{
-    resetTimeout();
-    // wrap around rows and cols in the 4x11 grid
-    int r = (int)cursorRow + dRow;
-    int c = (int)cursorCol + dCol;
-    if (r < 0)
-        r = KEYBOARD_ROWS - 1;
-    else if (r >= KEYBOARD_ROWS)
-        r = 0;
-    if (c < 0)
-        c = KEYBOARD_COLS - 1;
-    else if (c >= KEYBOARD_COLS)
-        c = 0;
-    cursorRow = (uint8_t)r;
-    cursorCol = (uint8_t)c;
-}
-
-void VirtualKeyboard::moveCursorUp()
-{
-    moveCursorDelta(-1, 0);
-}
-void VirtualKeyboard::moveCursorDown()
-{
-    moveCursorDelta(1, 0);
-}
-void VirtualKeyboard::moveCursorLeft()
-{
-    resetTimeout();
-
-    if (cursorCol > 0) {
-        cursorCol--;
-    } else {
-        if (cursorRow > 0) {
-            cursorRow--;
-            cursorCol = KEYBOARD_COLS - 1;
-        } else {
-            cursorRow = KEYBOARD_ROWS - 1;
-            cursorCol = KEYBOARD_COLS - 1;
-        }
-    }
-}
-void VirtualKeyboard::moveCursorRight()
-{
-    resetTimeout();
-
-    if (cursorCol < KEYBOARD_COLS - 1) {
-        cursorCol++;
-    } else {
-        if (cursorRow < KEYBOARD_ROWS - 1) {
-            cursorRow++;
-            cursorCol = 0;
-        } else {
-            cursorRow = 0;
-            cursorCol = 0;
-        }
-    }
-}
-
-void VirtualKeyboard::handlePress()
-{
-    resetTimeout(); // Reset timeout on any input activity
-
-    const VirtualKey &key = keyboard[cursorRow][cursorCol];
-
-    // Don't handle press if the key is empty (but allow special keys)
-    if (key.character == 0 && key.type == VK_CHAR) {
-        return;
-    }
-
-    // For character keys, insert lowercase character
-    if (key.type == VK_CHAR) {
-        insertCharacter(getCharForKey(key, false)); // false = lowercase/normal char
-        return;
-    }
-
-    // Handle non-character keys immediately
-    switch (key.type) {
-    case VK_BACKSPACE:
-        deleteCharacter();
-        break;
-    case VK_ENTER:
-        submitText();
-        break;
-    case VK_SPACE:
-        insertCharacter(' ');
-        break;
-    case VK_ESC:
-        if (onTextEntered) {
-            std::function<void(const std::string &)> callback = onTextEntered;
-            onTextEntered = nullptr;
-            inputText = "";
-            callback("");
-        }
-        return;
-    default:
-        break;
-    }
-}
-
-void VirtualKeyboard::handleLongPress()
-{
-    resetTimeout(); // Reset timeout on any input activity
-
-    const VirtualKey &key = keyboard[cursorRow][cursorCol];
-
-    // Don't handle press if the key is empty (but allow special keys)
-    if (key.character == 0 && key.type == VK_CHAR) {
-        return;
-    }
-
-    // For character keys, insert uppercase/alternate character
-    if (key.type == VK_CHAR) {
-        insertCharacter(getCharForKey(key, true)); // true = uppercase/alternate char
-        return;
-    }
-
-    switch (key.type) {
-    case VK_BACKSPACE:
-        // One-shot: delete up to 5 characters on long press
-        for (int i = 0; i < 5; ++i) {
-            if (inputText.empty())
-                break;
-            deleteCharacter();
-        }
-        break;
-    case VK_ENTER:
-        submitText();
-        break;
-    case VK_SPACE:
-        insertCharacter(' ');
-        break;
-    case VK_ESC:
-        if (onTextEntered) {
-            onTextEntered("");
-        }
-        break;
-    default:
-        break;
-    }
-}
-
-void VirtualKeyboard::insertCharacter(char c)
-{
-    if (inputText.length() < 160) { // Reasonable text length limit
-        inputText += c;
-    }
-}
-
-void VirtualKeyboard::deleteCharacter()
-{
-    if (!inputText.empty()) {
-        inputText.pop_back();
-    }
-}
-
-void VirtualKeyboard::submitText()
-{
-    LOG_INFO("Virtual keyboard: submitting text '%s'", inputText.c_str());
-
-    // Only submit if text is not empty
-    if (!inputText.empty() && onTextEntered) {
-        // Store callback and text to submit before clearing callback
-        std::function<void(const std::string &)> callback = onTextEntered;
-        std::string textToSubmit = inputText;
-        onTextEntered = nullptr;
-        // Don't clear inputText here - let the calling module handle cleanup
-        // inputText = "";  // Removed: keep text visible until module cleans up
-        callback(textToSubmit);
-    } else if (inputText.empty()) {
-        // For empty text, just ignore the submission - don't clear callback
-        // This keeps the virtual keyboard responsive for further input
-        LOG_INFO("Virtual keyboard: empty text submitted, ignoring - keyboard remains active");
-    } else {
-        // No callback available
-        if (screen) {
-            screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
-        }
-    }
-}
-
-void VirtualKeyboard::setInputText(const std::string &text)
-{
-    inputText = text;
-}
-
-std::string VirtualKeyboard::getInputText() const
-{
-    return inputText;
-}
-
-void VirtualKeyboard::setHeader(const std::string &header)
-{
-    headerText = header;
-}
-
-void VirtualKeyboard::setCallback(std::function<void(const std::string &)> callback)
-{
-    onTextEntered = callback;
-}
-
-void VirtualKeyboard::resetTimeout()
-{
-    lastActivityTime = millis();
-}
-
-bool VirtualKeyboard::isTimedOut() const
-{
-    return (millis() - lastActivityTime) > TIMEOUT_MS;
-}
-
-} // namespace graphics

src/graphics/VirtualKeyboard.h

@@ -1,80 +0,0 @@
-#pragma once
-
-#include "configuration.h"
-#include <OLEDDisplay.h>
-#include <functional>
-#include <string>
-
-namespace graphics
-{
-
-enum VirtualKeyType { VK_CHAR, VK_BACKSPACE, VK_ENTER, VK_SHIFT, VK_ESC, VK_SPACE };
-
-struct VirtualKey {
-    char character;
-    VirtualKeyType type;
-    uint8_t x;
-    uint8_t y;
-    uint8_t width;
-    uint8_t height;
-};
-
-class VirtualKeyboard
-{
-  public:
-    VirtualKeyboard();
-    ~VirtualKeyboard();
-
-    void draw(OLEDDisplay *display, int16_t offsetX, int16_t offsetY);
-    void setInputText(const std::string &text);
-    std::string getInputText() const;
-    void setHeader(const std::string &header);
-    void setCallback(std::function<void(const std::string &)> callback);
-
-    // Navigation methods for encoder input
-    void moveCursorUp();
-    void moveCursorDown();
-    void moveCursorLeft();
-    void moveCursorRight();
-    void handlePress();
-    void handleLongPress();
-
-    // Timeout management
-    void resetTimeout();
-    bool isTimedOut() const;
-
-  private:
-    static const uint8_t KEYBOARD_ROWS = 4;
-    static const uint8_t KEYBOARD_COLS = 11;
-    static const uint8_t KEY_WIDTH = 9;
-    static const uint8_t KEY_HEIGHT = 9;        // Compressed to fit 4 rows on 64px displays
-    static const uint8_t KEYBOARD_START_Y = 26; // Start just below input box bottom
-
-    VirtualKey keyboard[KEYBOARD_ROWS][KEYBOARD_COLS];
-
-    std::string inputText;
-    std::string headerText;
-    std::function<void(const std::string &)> onTextEntered;
-
-    uint8_t cursorRow;
-    uint8_t cursorCol;
-
-    // Timeout management for auto-exit
-    uint32_t lastActivityTime;
-    static const uint32_t TIMEOUT_MS = 60000; // 1 minute timeout
-
-    void initializeKeyboard();
-    void drawKey(OLEDDisplay *display, const VirtualKey &key, bool selected, int16_t x, int16_t y, uint8_t w, uint8_t h,
-                 bool isLastCol);
-    void drawInputArea(OLEDDisplay *display, int16_t offsetX, int16_t offsetY, int16_t keyboardStartY);
-
-    // Unified cursor movement helper
-    void moveCursorDelta(int dRow, int dCol);
-
-    char getCharForKey(const VirtualKey &key, bool isLongPress = false);
-    void insertCharacter(char c);
-    void deleteCharacter();
-    void submitText();
-};
-
-} // namespace graphics

src/graphics/draw/ClockRenderer.cpp

@@ -8,7 +8,6 @@
 #include "gps/RTC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
-#include "graphics/draw/UIRenderer.h"
 #include "graphics/emotes.h"
 #include "graphics/images.h"
 #include "main.h"
@@ -187,12 +186,11 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 {
     display->clear();
     display->setTextAlignment(TEXT_ALIGN_LEFT);
-
+    int line = 1;
     // === Set Title, Blank for Clock
     const char *titleStr = "";
     // === Header ===
-    graphics::drawCommonHeader(display, x, y, titleStr, true, true);
+    graphics::drawCommonHeader(display, x, y, titleStr, true);
-    int line = 0;
 
 #ifdef T_WATCH_S3
     if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
@@ -220,6 +218,7 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
         hour %= 12;
         if (hour == 0)
             hour = 12;
+        bool isPM = hour >= 12;
         snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
     } else {
         snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
@@ -231,8 +230,6 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
 
 #ifdef T_WATCH_S3
     float scale = 1.5;
-#elif defined(CHATTER_2)
-    float scale = 1.1;
 #else
     float scale = 0.75;
     if (isHighResolution) {
@@ -288,15 +285,11 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     int yOffset = (isHighResolution) ? 3 : 1;
 #ifdef SENSECAP_INDICATOR
     yOffset -= 3;
-#endif
-#ifdef T_DECK
-    yOffset -= 5;
 #endif
     if (config.display.use_12h_clock) {
         display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
                             isPM ? "pm" : "am");
     }
-
 #ifndef USE_EINK
     xOffset = (isHighResolution) ? 18 : 10;
     display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - yOffset,
@@ -316,8 +309,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // === Set Title, Blank for Clock
     const char *titleStr = "";
     // === Header ===
-    graphics::drawCommonHeader(display, x, y, titleStr, true, true);
+    graphics::drawCommonHeader(display, x, y, titleStr, true);
-    int line = 0;
 
 #ifdef T_WATCH_S3
     if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
@@ -370,7 +362,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // hour hand radius and y coordinate
     int16_t hourHandRadius = radius * 0.35;
     if (isHighResolution) {
-        hourHandRadius = radius * 0.55;
+        int16_t hourHandRadius = radius * 0.55;
     }
     int16_t hourHandNoonY = centerY - hourHandRadius;
 
@@ -389,7 +381,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 
         bool isPM = hour >= 12;
         if (config.display.use_12h_clock) {
-            isPM = hour >= 12;
+            bool isPM = hour >= 12;
             display->setFont(FONT_SMALL);
             int yOffset = isHighResolution ? 1 : 0;
 #ifdef USE_EINK

src/graphics/draw/DebugRenderer.cpp

@@ -94,8 +94,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
-     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -107,7 +106,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) &&                                  \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -122,8 +121,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
     } else {
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
-     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -263,6 +261,12 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
             display->drawString(x + 1, y, "USB");
     }
 
+    //    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, true);
+
+    //    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
+    //    if (config.display.heading_bold)
+    //        display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
+
     uint32_t currentMillis = millis();
     uint32_t seconds = currentMillis / 1000;
     uint32_t minutes = seconds / 60;
@@ -277,13 +281,12 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
     std::string uptime = UIRenderer::drawTimeDelta(days, hours, minutes, seconds);
 
     // Line 1 (Still)
-#if !defined(M5STACK_UNITC6L)
     display->drawString(x + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
     if (config.display.heading_bold)
         display->drawString(x - 1 + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
 
     display->setColor(WHITE);
-#endif
+
     // Setup string to assemble analogClock string
     std::string analogClock = "";
 
@@ -330,7 +333,8 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 #if HAS_GPS
     if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
         // Line 3
-        if (uiconfig.gps_format != meshtastic_DeviceUIConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
+        if (config.display.gps_format !=
+            meshtastic_Config_DisplayConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
             UIRenderer::drawGpsAltitude(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
 
         // Line 4
@@ -386,56 +390,31 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     char shortnameble[35];
     getMacAddr(dmac);
     snprintf(screen->ourId, sizeof(screen->ourId), "%02x%02x", dmac[4], dmac[5]);
-#if defined(M5STACK_UNITC6L)
-    snprintf(shortnameble, sizeof(shortnameble), "%s", screen->ourId);
-#else
     snprintf(shortnameble, sizeof(shortnameble), "BLE: %s", screen->ourId);
-#endif
     int textWidth = display->getStringWidth(shortnameble);
     int nameX = (SCREEN_WIDTH - textWidth);
     display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
 
-    // === Second Row: Role ===
+    // === Second Row: Radio Preset ===
-    auto role = DisplayFormatters::getDeviceRole(config.device.role);
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
-    char device_role[25];
-    snprintf(device_role, sizeof(device_role), "Role: %s", role);
-    textWidth = display->getStringWidth(device_role);
-    nameX = (SCREEN_WIDTH - textWidth) / 2;
-    display->drawString(nameX, getTextPositions(display)[line++], device_role);
-
-    // === Third Row: Radio Preset ===
-    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
-
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
     if (region != nullptr) {
-#if defined(M5STACK_UNITC6L)
-        snprintf(regionradiopreset, sizeof(regionradiopreset), "%s", region);
-#else
         snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode);
-#endif
     }
     textWidth = display->getStringWidth(regionradiopreset);
     nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line++], regionradiopreset);
 
-    // === Fourth Row: Frequency / ChanNum ===
+    // === Third Row: Frequency / ChanNum ===
     char frequencyslot[35];
     char freqStr[16];
     float freq = RadioLibInterface::instance->getFreq();
     snprintf(freqStr, sizeof(freqStr), "%.3f", freq);
     if (config.lora.channel_num == 0) {
-#if defined(M5STACK_UNITC6L)
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %smhz", freqStr);
-        snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz", freqStr);
-#else
-        snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %sMHz", freqStr);
-#endif
     } else {
-#if defined(M5STACK_UNITC6L)
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %smhz (%d)", freqStr, config.lora.channel_num);
-        snprintf(frequencyslot, sizeof(frequencyslot), "%sMHz (%d)", freqStr, config.lora.channel_num);
-#else
-        snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %sMHz (%d)", freqStr, config.lora.channel_num);
-#endif
     }
     size_t len = strlen(frequencyslot);
     if (len >= 4 && strcmp(frequencyslot + len - 4, " (0)") == 0) {
@@ -445,8 +424,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     nameX = (SCREEN_WIDTH - textWidth) / 2;
     display->drawString(nameX, getTextPositions(display)[line++], frequencyslot);
 
-#if !defined(M5STACK_UNITC6L)
+    // === Fourth Row: Channel Utilization ===
-    // === Fifth Row: Channel Utilization ===
     const char *chUtil = "ChUtil:";
     char chUtilPercentage[10];
     snprintf(chUtilPercentage, sizeof(chUtilPercentage), "%2.0f%%", airTime->channelUtilizationPercent());
@@ -463,7 +441,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     int total_line_content_width = (chUtil_x + chutil_bar_width + display->getStringWidth(chUtilPercentage) + extraoffset) / 2;
     int starting_position = centerofscreen - total_line_content_width;
 
-    display->drawString(starting_position, getTextPositions(display)[line], chUtil);
+    display->drawString(starting_position, getTextPositions(display)[line++], chUtil);
 
     // Force 56% or higher to show a full 100% bar, text would still show related percent.
     if (chutil_percent >= 61) {
@@ -500,15 +478,14 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
         display->fillRect(starting_position + chUtil_x, chUtil_y, fillRight, chutil_bar_height);
     }
 
-    display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[line++],
+    display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[4],
                         chUtilPercentage);
-#endif
 }
 
 // ****************************
-// *      System Screen       *
+// *      Memory Screen       *
 // ****************************
-void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     display->clear();
     display->setFont(FONT_SMALL);
@@ -528,11 +505,8 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
 #ifdef USE_EINK
     barsOffset -= 12;
 #endif
-#if defined(M5STACK_UNITC6L)
-    const int barX = x + 45 + barsOffset;
-#else
     const int barX = x + 40 + barsOffset;
-#endif
+
     auto drawUsageRow = [&](const char *label, uint32_t used, uint32_t total, bool isHeap = false) {
         if (total == 0)
             return;
@@ -557,7 +531,7 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
         // Label
         display->setTextAlignment(TEXT_ALIGN_LEFT);
         display->drawString(labelX, getTextPositions(display)[line], label);
-#if !defined(M5STACK_UNITC6L)
+
         // Bar
         int barY = getTextPositions(display)[line] + (FONT_HEIGHT_SMALL - barHeight) / 2;
         display->setColor(WHITE);
@@ -565,7 +539,7 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
 
         display->fillRect(barX, barY, fillWidth, barHeight);
         display->setColor(WHITE);
-#endif
+
         // Value string
         display->setTextAlignment(TEXT_ALIGN_RIGHT);
         display->drawString(SCREEN_WIDTH - 2, getTextPositions(display)[line], combinedStr);
@@ -618,32 +592,12 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
         line += 1;
     }
     line += 1;
-
     char appversionstr[35];
-    snprintf(appversionstr, sizeof(appversionstr), "Ver: %s", optstr(APP_VERSION));
+    snprintf(appversionstr, sizeof(appversionstr), "Ver.: %s", optstr(APP_VERSION));
-    char appversionstr_formatted[40];
-    char *lastDot = strrchr(appversionstr, '.');
-#if defined(M5STACK_UNITC6L)
-    if (lastDot != nullptr) {
-        *lastDot = '\0'; // truncate string
-    }
-#else
-    if (lastDot) {
-        size_t prefixLen = lastDot - appversionstr;
-        strncpy(appversionstr_formatted, appversionstr, prefixLen);
-        appversionstr_formatted[prefixLen] = '\0';
-        strncat(appversionstr_formatted, " (", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
-        strncat(appversionstr_formatted, lastDot + 1, sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
-        strncat(appversionstr_formatted, ")", sizeof(appversionstr_formatted) - strlen(appversionstr_formatted) - 1);
-        strncpy(appversionstr, appversionstr_formatted, sizeof(appversionstr) - 1);
-        appversionstr[sizeof(appversionstr) - 1] = '\0';
-    }
-#endif
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
-
     display->drawString(nameX, getTextPositions(display)[line], appversionstr);
-#if !defined(M5STACK_UNITC6L)
+
     if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line < 4)) { // Only show uptime if the screen can show it
         line += 1;
         char uptimeStr[32] = "";
@@ -662,36 +616,7 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line], uptimeStr);
     }
-#endif
 }
-
-// ****************************
-// * Chirpy Screen      *
-// ****************************
-void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
-{
-    display->clear();
-    display->setTextAlignment(TEXT_ALIGN_LEFT);
-    display->setFont(FONT_SMALL);
-    int line = 1;
-    int iconX = SCREEN_WIDTH - chirpy_width - (chirpy_width / 3);
-    int iconY = (SCREEN_HEIGHT - chirpy_height) / 2;
-    int textX_offset = 10;
-    if (isHighResolution) {
-        iconX = SCREEN_WIDTH - chirpy_width_hirez - (chirpy_width_hirez / 3);
-        iconY = (SCREEN_HEIGHT - chirpy_height_hirez) / 2;
-        textX_offset = textX_offset * 4;
-        display->drawXbm(iconX, iconY, chirpy_width_hirez, chirpy_height_hirez, chirpy_hirez);
-    } else {
-        display->drawXbm(iconX, iconY, chirpy_width, chirpy_height, chirpy);
-    }
-
-    int textX = (display->getWidth() / 2) - textX_offset - (display->getStringWidth("Hello") / 2);
-    display->drawString(textX, getTextPositions(display)[line++], "Hello");
-    textX = (display->getWidth() / 2) - textX_offset - (display->getStringWidth("World!") / 2);
-    display->drawString(textX, getTextPositions(display)[line++], "World!");
-}
-
 } // namespace DebugRenderer
 } // namespace graphics
 #endif

src/graphics/draw/DebugRenderer.h

@@ -31,10 +31,8 @@ void drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state
 // LoRa information display
 void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 
-// System screen display
+// Memory screen display
-void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
-// Chirpy screen display
-void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 } // namespace DebugRenderer
 
 } // namespace graphics

src/graphics/draw/MenuHandler.cpp

@@ -10,17 +10,11 @@
 #include "graphics/Screen.h"
 #include "graphics/SharedUIDisplay.h"
 #include "graphics/draw/UIRenderer.h"
-#include "input/RotaryEncoderInterruptImpl1.h"
-#include "input/UpDownInterruptImpl1.h"
 #include "main.h"
-#include "mesh/MeshTypes.h"
 #include "modules/AdminModule.h"
 #include "modules/CannedMessageModule.h"
 #include "modules/KeyVerificationModule.h"
 
-#include "modules/TraceRouteModule.h"
-#include <functional>
-
 extern uint16_t TFT_MESH;
 
 namespace graphics
@@ -29,49 +23,6 @@ menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
 
-void menuHandler::loraMenu()
-{
-    static const char *optionsArray[] = {"Back", "Device Role", "Radio Preset", "LoRa Region"};
-    enum optionsNumbers { Back = 0, device_role_picker = 1, radio_preset_picker = 2, lora_picker = 3 };
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "LoRa Actions";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 4;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Back) {
-            // No action
-        } else if (selected == device_role_picker) {
-            menuHandler::menuQueue = menuHandler::device_role_picker;
-        } else if (selected == radio_preset_picker) {
-            menuHandler::menuQueue = menuHandler::radio_preset_picker;
-        } else if (selected == lora_picker) {
-            menuHandler::menuQueue = menuHandler::lora_picker;
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::OnboardMessage()
-{
-    static const char *optionsArray[] = {"OK", "Got it!"};
-    enum optionsNumbers { OK, got };
-    BannerOverlayOptions bannerOptions;
-#if HAS_TFT
-    bannerOptions.message = "Welcome to Meshtastic!\nSwipe to navigate and\nlong press to select\nor open a menu.";
-#elif defined(BUTTON_PIN)
-    bannerOptions.message = "Welcome to Meshtastic!\nClick to navigate and\nlong press to select\nor open a menu.";
-#else
-    bannerOptions.message = "Welcome to Meshtastic!\nUse the Select button\nto open menus\nand make selections.";
-#endif
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        menuHandler::menuQueue = menuHandler::no_timeout_lora_picker;
-        screen->runNow();
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::LoraRegionPicker(uint32_t duration)
 {
     static const char *optionsArray[] = {"Back",
@@ -100,18 +51,12 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                                          "PH_915",
                                          "ANZ_433",
                                          "KZ_433",
-                                         "KZ_863",
+                                         "KZ_863"};
-                                         "NP_865",
-                                         "BR_902"};
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "LoRa Region";
-#else
     bannerOptions.message = "Set the LoRa region";
-#endif
     bannerOptions.durationMs = duration;
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 27;
+    bannerOptions.optionsCount = 25;
     bannerOptions.InitialSelected = 0;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
@@ -148,87 +93,6 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::DeviceRolePicker()
-{
-    static const char *optionsArray[] = {"Back", "Client", "Client Mute", "Lost and Found", "Tracker"};
-    enum optionsNumbers {
-        Back = 0,
-        devicerole_client = 1,
-        devicerole_clientmute = 2,
-        devicerole_lostandfound = 3,
-        devicerole_tracker = 4
-    };
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Device Role";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 5;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Back) {
-            menuHandler::menuQueue = menuHandler::lora_Menu;
-            screen->runNow();
-            return;
-        } else if (selected == devicerole_client) {
-            config.device.role = meshtastic_Config_DeviceConfig_Role_CLIENT;
-        } else if (selected == devicerole_clientmute) {
-            config.device.role = meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE;
-        } else if (selected == devicerole_lostandfound) {
-            config.device.role = meshtastic_Config_DeviceConfig_Role_LOST_AND_FOUND;
-        } else if (selected == devicerole_tracker) {
-            config.device.role = meshtastic_Config_DeviceConfig_Role_TRACKER;
-        }
-        service->reloadConfig(SEGMENT_CONFIG);
-        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::RadioPresetPicker()
-{
-    static const char *optionsArray[] = {"Back",       "LongSlow",  "LongModerate", "LongFast",  "MediumSlow",
-                                         "MediumFast", "ShortSlow", "ShortFast",    "ShortTurbo"};
-    enum optionsNumbers {
-        Back = 0,
-        radiopreset_LongSlow = 1,
-        radiopreset_LongModerate = 2,
-        radiopreset_LongFast = 3,
-        radiopreset_MediumSlow = 4,
-        radiopreset_MediumFast = 5,
-        radiopreset_ShortSlow = 6,
-        radiopreset_ShortFast = 7,
-        radiopreset_ShortTurbo = 8
-    };
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Radio Preset";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 9;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Back) {
-            menuHandler::menuQueue = menuHandler::lora_Menu;
-            screen->runNow();
-            return;
-        } else if (selected == radiopreset_LongSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW;
-        } else if (selected == radiopreset_LongModerate) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE;
-        } else if (selected == radiopreset_LongFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
-        } else if (selected == radiopreset_MediumSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW;
-        } else if (selected == radiopreset_MediumFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST;
-        } else if (selected == radiopreset_ShortSlow) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW;
-        } else if (selected == radiopreset_ShortFast) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST;
-        } else if (selected == radiopreset_ShortTurbo) {
-            config.lora.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO;
-        }
-        service->reloadConfig(SEGMENT_CONFIG);
-        rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::TwelveHourPicker()
 {
     static const char *optionsArray[] = {"Back", "12-hour", "24-hour"};
@@ -251,22 +115,6 @@ void menuHandler::TwelveHourPicker()
     screen->showOverlayBanner(bannerOptions);
 }
 
-// Reusable confirmation prompt function
-void menuHandler::showConfirmationBanner(const char *message, std::function<void()> onConfirm)
-{
-    static const char *confirmOptions[] = {"No", "Yes"};
-    BannerOverlayOptions confirmBanner;
-    confirmBanner.message = message;
-    confirmBanner.optionsArrayPtr = confirmOptions;
-    confirmBanner.optionsCount = 2;
-    confirmBanner.bannerCallback = [onConfirm](int confirmSelected) -> void {
-        if (confirmSelected == 1) {
-            onConfirm();
-        }
-    };
-    screen->showOverlayBanner(confirmBanner);
-}
-
 void menuHandler::ClockFacePicker()
 {
     static const char *optionsArray[] = {"Back", "Digital", "Analog"};
@@ -303,7 +151,6 @@ void menuHandler::TZPicker()
                                          "US/Mountain",
                                          "US/Central",
                                          "US/Eastern",
-                                         "BR/Brasilia",
                                          "UTC",
                                          "EU/Western",
                                          "EU/"
@@ -318,7 +165,7 @@ void menuHandler::TZPicker()
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Pick Timezone";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 19;
+    bannerOptions.optionsCount = 17;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 0) {
             menuHandler::menuQueue = menuHandler::clock_menu;
@@ -337,27 +184,25 @@ void menuHandler::TZPicker()
             strncpy(config.device.tzdef, "CST6CDT,M3.2.0,M11.1.0", sizeof(config.device.tzdef));
         } else if (selected == 7) { // Eastern
             strncpy(config.device.tzdef, "EST5EDT,M3.2.0,M11.1.0", sizeof(config.device.tzdef));
-        } else if (selected == 8) { // Brazil
+        } else if (selected == 8) { // UTC
-            strncpy(config.device.tzdef, "BRT3", sizeof(config.device.tzdef));
+            strncpy(config.device.tzdef, "UTC", sizeof(config.device.tzdef));
-        } else if (selected == 9) { // UTC
+        } else if (selected == 9) { // EU/Western
-            strncpy(config.device.tzdef, "UTC0", sizeof(config.device.tzdef));
-        } else if (selected == 10) { // EU/Western
             strncpy(config.device.tzdef, "GMT0BST,M3.5.0/1,M10.5.0", sizeof(config.device.tzdef));
-        } else if (selected == 11) { // EU/Central
+        } else if (selected == 10) { // EU/Central
             strncpy(config.device.tzdef, "CET-1CEST,M3.5.0,M10.5.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 12) { // EU/Eastern
+        } else if (selected == 11) { // EU/Eastern
             strncpy(config.device.tzdef, "EET-2EEST,M3.5.0/3,M10.5.0/4", sizeof(config.device.tzdef));
-        } else if (selected == 13) { // Asia/Kolkata
+        } else if (selected == 12) { // Asia/Kolkata
             strncpy(config.device.tzdef, "IST-5:30", sizeof(config.device.tzdef));
-        } else if (selected == 14) { // China
+        } else if (selected == 13) { // China
             strncpy(config.device.tzdef, "HKT-8", sizeof(config.device.tzdef));
-        } else if (selected == 15) { // AU/AWST
+        } else if (selected == 14) { // AU/AWST
             strncpy(config.device.tzdef, "AWST-8", sizeof(config.device.tzdef));
-        } else if (selected == 16) { // AU/ACST
+        } else if (selected == 15) { // AU/ACST
             strncpy(config.device.tzdef, "ACST-9:30ACDT,M10.1.0,M4.1.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 17) { // AU/AEST
+        } else if (selected == 16) { // AU/AEST
             strncpy(config.device.tzdef, "AEST-10AEDT,M10.1.0,M4.1.0/3", sizeof(config.device.tzdef));
-        } else if (selected == 18) { // NZ
+        } else if (selected == 17) { // NZ
             strncpy(config.device.tzdef, "NZST-12NZDT,M9.5.0,M4.1.0/3", sizeof(config.device.tzdef));
         }
         if (selected != 0) {
@@ -370,11 +215,7 @@ void menuHandler::TZPicker()
 
 void menuHandler::clockMenu()
 {
-#if defined(M5STACK_UNITC6L)
-    static const char *optionsArray[] = {"Back", "Time Format", "Timezone"};
-#else
     static const char *optionsArray[] = {"Back", "Clock Face", "Time Format", "Timezone"};
-#endif
     enum optionsNumbers { Back = 0, Clock = 1, Time = 2, Timezone = 3 };
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Clock Action";
@@ -398,11 +239,8 @@ void menuHandler::clockMenu()
 void menuHandler::messageResponseMenu()
 {
     enum optionsNumbers { Back = 0, Dismiss = 1, Preset = 2, Freetext = 3, Aloud = 4, enumEnd = 5 };
-#if defined(M5STACK_UNITC6L)
+
-    static const char *optionsArray[enumEnd] = {"Back", "Dismiss", "Reply Preset"};
-#else
     static const char *optionsArray[enumEnd] = {"Back", "Dismiss", "Reply via Preset"};
-#endif
     static int optionsEnumArray[enumEnd] = {Back, Dismiss, Preset};
     int options = 3;
 
@@ -416,17 +254,13 @@ void menuHandler::messageResponseMenu()
     optionsEnumArray[options++] = Aloud;
 #endif
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Message";
-#else
     bannerOptions.message = "Message Action";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Dismiss) {
-            screen->hideCurrentFrame();
+            screen->dismissCurrentFrame();
         } else if (selected == Preset) {
             if (devicestate.rx_text_message.to == NODENUM_BROADCAST) {
                 cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST, devicestate.rx_text_message.channel);
@@ -454,65 +288,44 @@ void menuHandler::messageResponseMenu()
 
 void menuHandler::homeBaseMenu()
 {
-    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Sleep, enumEnd };
+    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Bluetooth, Sleep, enumEnd };
 
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
-#if defined(PIN_EINK_EN) || defined(PCA_PIN_EINK_EN)
+#ifdef PIN_EINK_EN
     optionsArray[options] = "Toggle Backlight";
     optionsEnumArray[options++] = Backlight;
 #else
     optionsArray[options] = "Sleep Screen";
     optionsEnumArray[options++] = Sleep;
 #endif
-    if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
+
-        optionsArray[options] = "Send Position";
+    optionsArray[options] = "Send Position";
-    } else {
-        optionsArray[options] = "Send Node Info";
-    }
     optionsEnumArray[options++] = Position;
-#if defined(M5STACK_UNITC6L)
-    optionsArray[options] = "New Preset";
-#else
     optionsArray[options] = "New Preset Msg";
-#endif
     optionsEnumArray[options++] = Preset;
     if (kb_found) {
         optionsArray[options] = "New Freetext Msg";
         optionsEnumArray[options++] = Freetext;
     }
+    optionsArray[options] = "Bluetooth Toggle";
+    optionsEnumArray[options++] = Bluetooth;
 
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Home";
-#else
     bannerOptions.message = "Home Action";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Backlight) {
-#if defined(PIN_EINK_EN)
+#ifdef PIN_EINK_EN
-            if (uiconfig.screen_brightness == 1) {
+            if (digitalRead(PIN_EINK_EN) == HIGH) {
-                uiconfig.screen_brightness = 0;
                 digitalWrite(PIN_EINK_EN, LOW);
             } else {
-                uiconfig.screen_brightness = 1;
                 digitalWrite(PIN_EINK_EN, HIGH);
             }
-            saveUIConfig();
-#elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1) {
-                uiconfig.screen_brightness = 0;
-                io.digitalWrite(PCA_PIN_EINK_EN, LOW);
-            } else {
-                uiconfig.screen_brightness = 1;
-                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
-            }
-            saveUIConfig();
 #endif
         } else if (selected == Sleep) {
             screen->setOn(false);
@@ -523,40 +336,9 @@ void menuHandler::homeBaseMenu()
             cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
         } else if (selected == Freetext) {
             cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
-        }
+        } else if (selected == Bluetooth) {
-    };
+            menuQueue = bluetooth_toggle_menu;
-    screen->showOverlayBanner(bannerOptions);
+            screen->runNow();
-}
-
-void menuHandler::textMessageMenu()
-{
-    cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
-}
-
-void menuHandler::textMessageBaseMenu()
-{
-    enum optionsNumbers { Back, Preset, Freetext, enumEnd };
-
-    static const char *optionsArray[enumEnd] = {"Back"};
-    static int optionsEnumArray[enumEnd] = {Back};
-    int options = 1;
-    optionsArray[options] = "New Preset Msg";
-    optionsEnumArray[options++] = Preset;
-    if (kb_found) {
-        optionsArray[options] = "New Freetext Msg";
-        optionsEnumArray[options++] = Freetext;
-    }
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Message Action";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Preset) {
-            cannedMessageModule->LaunchWithDestination(NODENUM_BROADCAST);
-        } else if (selected == Freetext) {
-            cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -564,32 +346,26 @@ void menuHandler::textMessageBaseMenu()
 
 void menuHandler::systemBaseMenu()
 {
-    enum optionsNumbers { Back, Notifications, ScreenOptions, Bluetooth, PowerMenu, FrameToggles, Test, enumEnd };
+    // Check if brightness is supported
+    bool hasSupportBrightness = false;
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
+    hasSupportBrightness = true;
+#endif
+
+    enum optionsNumbers { Back, Notifications, ScreenOptions, PowerMenu, Test, enumEnd };
     static const char *optionsArray[enumEnd] = {"Back"};
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
     optionsArray[options] = "Notifications";
     optionsEnumArray[options++] = Notifications;
-#if defined(ST7789_CS) || defined(ST7796_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) ||              \
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) ||             \
-    defined(USE_SH1107) || defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
+    defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
     optionsArray[options] = "Screen Options";
     optionsEnumArray[options++] = ScreenOptions;
 #endif
 
-    optionsArray[options] = "Frame Visiblity Toggle";
-    optionsEnumArray[options++] = FrameToggles;
-#if defined(M5STACK_UNITC6L)
-    optionsArray[options] = "Bluetooth";
-#else
-    optionsArray[options] = "Bluetooth Toggle";
-#endif
-    optionsEnumArray[options++] = Bluetooth;
-#if defined(M5STACK_UNITC6L)
-    optionsArray[options] = "Power";
-#else
     optionsArray[options] = "Reboot/Shutdown";
-#endif
     optionsEnumArray[options++] = PowerMenu;
 
     if (test_enabled) {
@@ -598,11 +374,7 @@ void menuHandler::systemBaseMenu()
     }
 
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "System";
-#else
     bannerOptions.message = "System Action";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
@@ -616,15 +388,9 @@ void menuHandler::systemBaseMenu()
         } else if (selected == PowerMenu) {
             menuHandler::menuQueue = menuHandler::power_menu;
             screen->runNow();
-        } else if (selected == FrameToggles) {
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
         } else if (selected == Test) {
             menuHandler::menuQueue = menuHandler::test_menu;
             screen->runNow();
-        } else if (selected == Bluetooth) {
-            menuQueue = bluetooth_toggle_menu;
-            screen->runNow();
         } else if (selected == Back && !test_enabled) {
             test_count++;
             if (test_count > 4) {
@@ -637,12 +403,8 @@ void menuHandler::systemBaseMenu()
 
 void menuHandler::favoriteBaseMenu()
 {
-    enum optionsNumbers { Back, Preset, Freetext, Remove, TraceRoute, enumEnd };
+    enum optionsNumbers { Back, Preset, Freetext, Remove, enumEnd };
-#if defined(M5STACK_UNITC6L)
-    static const char *optionsArray[enumEnd] = {"Back", "New Preset"};
-#else
     static const char *optionsArray[enumEnd] = {"Back", "New Preset Msg"};
-#endif
     static int optionsEnumArray[enumEnd] = {Back, Preset};
     int options = 2;
 
@@ -650,34 +412,22 @@ void menuHandler::favoriteBaseMenu()
         optionsArray[options] = "New Freetext Msg";
         optionsEnumArray[options++] = Freetext;
     }
-#if !defined(M5STACK_UNITC6L)
-    optionsArray[options] = "Trace Route";
-    optionsEnumArray[options++] = TraceRoute;
-#endif
     optionsArray[options] = "Remove Favorite";
     optionsEnumArray[options++] = Remove;
 
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Favorites";
-#else
     bannerOptions.message = "Favorites Action";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Preset) {
+        if (selected == 1) {
             cannedMessageModule->LaunchWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if (selected == Freetext) {
+        } else if (selected == 2 && kb_found) {
             cannedMessageModule->LaunchFreetextWithDestination(graphics::UIRenderer::currentFavoriteNodeNum);
-        } else if (selected == Remove) {
+        } else if ((!kb_found && selected == 2) || (selected == 3 && kb_found)) {
             menuHandler::menuQueue = menuHandler::remove_favorite;
             screen->runNow();
-        } else if (selected == TraceRoute) {
-            if (traceRouteModule) {
-                traceRouteModule->launch(graphics::UIRenderer::currentFavoriteNodeNum);
-            }
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -685,17 +435,16 @@ void menuHandler::favoriteBaseMenu()
 
 void menuHandler::positionBaseMenu()
 {
-    enum optionsNumbers { Back, GPSToggle, GPSFormat, CompassMenu, CompassCalibrate, enumEnd };
+    enum optionsNumbers { Back, GPSToggle, CompassMenu, CompassCalibrate, enumEnd };
 
-    static const char *optionsArray[enumEnd] = {"Back", "GPS Toggle", "GPS Format", "Compass"};
+    static const char *optionsArray[enumEnd] = {"Back", "GPS Toggle", "Compass"};
-    static int optionsEnumArray[enumEnd] = {Back, GPSToggle, GPSFormat, CompassMenu};
+    static int optionsEnumArray[enumEnd] = {Back, GPSToggle, CompassMenu};
-    int options = 4;
+    int options = 3;
 
     if (accelerometerThread) {
         optionsArray[options] = "Compass Calibrate";
         optionsEnumArray[options++] = CompassCalibrate;
     }
-
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Position Action";
     bannerOptions.optionsArrayPtr = optionsArray;
@@ -705,9 +454,6 @@ void menuHandler::positionBaseMenu()
         if (selected == GPSToggle) {
             menuQueue = gps_toggle_menu;
             screen->runNow();
-        } else if (selected == GPSFormat) {
-            menuQueue = gps_format_menu;
-            screen->runNow();
         } else if (selected == CompassMenu) {
             menuQueue = compass_point_north_menu;
             screen->runNow();
@@ -720,20 +466,12 @@ void menuHandler::positionBaseMenu()
 
 void menuHandler::nodeListMenu()
 {
-    enum optionsNumbers { Back, Favorite, TraceRoute, Verify, Reset, enumEnd };
+    enum optionsNumbers { Back, Favorite, Verify, Reset };
-#if defined(M5STACK_UNITC6L)
+    static const char *optionsArray[] = {"Back", "Add Favorite", "Key Verification", "Reset NodeDB"};
-    static const char *optionsArray[] = {"Back", "Add Favorite", "Reset Node"};
-#else
-    static const char *optionsArray[] = {"Back", "Add Favorite", "Trace Route", "Key Verification", "Reset NodeDB"};
-#endif
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Node Action";
     bannerOptions.optionsArrayPtr = optionsArray;
-#if defined(M5STACK_UNITC6L)
+    bannerOptions.optionsCount = 4;
-    bannerOptions.optionsCount = 3;
-#else
-    bannerOptions.optionsCount = 5;
-#endif
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Favorite) {
             menuQueue = add_favorite;
@@ -744,9 +482,6 @@ void menuHandler::nodeListMenu()
         } else if (selected == Reset) {
             menuQueue = reset_node_db_menu;
             screen->runNow();
-        } else if (selected == TraceRoute) {
-            menuQueue = trace_route_menu;
-            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -834,62 +569,13 @@ void menuHandler::GPSToggleMenu()
     bannerOptions.InitialSelected = config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED ? 1 : 2;
     screen->showOverlayBanner(bannerOptions);
 }
-void menuHandler::GPSFormatMenu()
-{
-
-    static const char *optionsArray[] = {"Back",
-                                         isHighResolution ? "Decimal Degrees" : "DEC",
-                                         isHighResolution ? "Degrees Minutes Seconds" : "DMS",
-                                         isHighResolution ? "Universal Transverse Mercator" : "UTM",
-                                         isHighResolution ? "Military Grid Reference System" : "MGRS",
-                                         isHighResolution ? "Open Location Code" : "OLC",
-                                         isHighResolution ? "Ordnance Survey Grid Ref" : "OSGR",
-                                         isHighResolution ? "Maidenhead Locator" : "MLS"};
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "GPS Format";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 8;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
-            uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_DEC;
-            service->reloadConfig(SEGMENT_CONFIG);
-        } else if (selected == 2) {
-            uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_DMS;
-            service->reloadConfig(SEGMENT_CONFIG);
-        } else if (selected == 3) {
-            uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_UTM;
-            service->reloadConfig(SEGMENT_CONFIG);
-        } else if (selected == 4) {
-            uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_MGRS;
-            service->reloadConfig(SEGMENT_CONFIG);
-        } else if (selected == 5) {
-            uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_OLC;
-            service->reloadConfig(SEGMENT_CONFIG);
-        } else if (selected == 6) {
-            uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_OSGR;
-            service->reloadConfig(SEGMENT_CONFIG);
-        } else if (selected == 7) {
-            uiconfig.gps_format = meshtastic_DeviceUIConfig_GpsCoordinateFormat_MLS;
-            service->reloadConfig(SEGMENT_CONFIG);
-        } else {
-            menuQueue = position_base_menu;
-            screen->runNow();
-        }
-    };
-    bannerOptions.InitialSelected = uiconfig.gps_format + 1;
-    screen->showOverlayBanner(bannerOptions);
-}
 #endif
 
 void menuHandler::BluetoothToggleMenu()
 {
     static const char *optionsArray[] = {"Back", "Enabled", "Disabled"};
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Bluetooth";
-#else
     bannerOptions.message = "Toggle Bluetooth";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
@@ -949,7 +635,7 @@ void menuHandler::BrightnessPickerMenu()
 #if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190)
             // For HELTEC devices, use analogWrite to control backlight
             analogWrite(VTFT_LEDA, uiconfig.screen_brightness);
-#elif defined(ST7789_CS) || defined(ST7796_CS)
+#elif defined(ST7789_CS)
             static_cast<TFTDisplay *>(screen->getDisplayDevice())->setDisplayBrightness(uiconfig.screen_brightness);
 #elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
             screen->getDisplayDevice()->setBrightness(uiconfig.screen_brightness);
@@ -992,7 +678,6 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
         uint8_t TFT_MESH_r = 0;
         uint8_t TFT_MESH_g = 0;
         uint8_t TFT_MESH_b = 0;
@@ -1044,6 +729,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
             screen->runNow();
         }
 
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
         if (selected != 0) {
             display->setColor(BLACK);
             display->fillRect(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
@@ -1081,11 +767,7 @@ void menuHandler::rebootMenu()
 {
     static const char *optionsArray[] = {"Back", "Confirm"};
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Reboot";
-#else
     bannerOptions.message = "Reboot Device?";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
@@ -1105,17 +787,14 @@ void menuHandler::shutdownMenu()
 {
     static const char *optionsArray[] = {"Back", "Confirm"};
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Shutdown";
-#else
     bannerOptions.message = "Shutdown Device?";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 1) {
-            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SHUTDOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
+            IF_SCREEN(screen->showSimpleBanner("Shutting Down...", 0));
-            inputBroker->injectInputEvent(&event);
+            nodeDB->saveToDisk();
+            power->shutdown();
         } else {
             menuQueue = power_menu;
             screen->runNow();
@@ -1126,12 +805,7 @@ void menuHandler::shutdownMenu()
 
 void menuHandler::addFavoriteMenu()
 {
-#if defined(M5STACK_UNITC6L)
-    screen->showNodePicker("Node Favorite", 30000, [](uint32_t nodenum) -> void {
-#else
     screen->showNodePicker("Node To Favorite", 30000, [](uint32_t nodenum) -> void {
-
-#endif
         LOG_WARN("Nodenum: %u", nodenum);
         nodeDB->set_favorite(true, nodenum);
         screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
@@ -1153,54 +827,26 @@ void menuHandler::removeFavoriteMenu()
     bannerOptions.optionsCount = 2;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == 1) {
-            LOG_INFO("Removing %x as favorite node", graphics::UIRenderer::currentFavoriteNodeNum);
             nodeDB->set_favorite(false, graphics::UIRenderer::currentFavoriteNodeNum);
-            screen->setFrames(graphics::Screen::FOCUS_DEFAULT);
+            screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
         }
     };
     screen->showOverlayBanner(bannerOptions);
 }
 
-void menuHandler::traceRouteMenu()
-{
-    screen->showNodePicker("Node to Trace", 30000, [](uint32_t nodenum) -> void {
-        LOG_INFO("Menu: Node picker selected node 0x%08x, traceRouteModule=%p", nodenum, traceRouteModule);
-        if (traceRouteModule) {
-            traceRouteModule->startTraceRoute(nodenum);
-        }
-    });
-}
-
 void menuHandler::testMenu()
 {
 
-    enum optionsNumbers { Back, NumberPicker, ShowChirpy };
+    static const char *optionsArray[] = {"Back", "Number Picker"};
-    static const char *optionsArray[4] = {"Back"};
-    static int optionsEnumArray[4] = {Back};
-    int options = 1;
-
-    optionsArray[options] = "Number Picker";
-    optionsEnumArray[options++] = NumberPicker;
-
-    optionsArray[options] = screen->isFrameHidden("chirpy") ? "Show Chirpy" : "Hide Chirpy";
-    optionsEnumArray[options++] = ShowChirpy;
-
     BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Hidden Test Menu";
+    std::string message = "Test to Run?\n";
+    bannerOptions.message = message.c_str();
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = options;
+    bannerOptions.optionsCount = 2;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == NumberPicker) {
+        if (selected == 1) {
             menuQueue = number_test;
             screen->runNow();
-        } else if (selected == ShowChirpy) {
-            screen->toggleFrameVisibility("chirpy");
-            screen->setFrames(Screen::FOCUS_SYSTEM);
-
-        } else {
-            menuQueue = system_base_menu;
-            screen->runNow();
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -1278,28 +924,23 @@ void menuHandler::screenOptionsMenu()
 {
     // Check if brightness is supported
     bool hasSupportBrightness = false;
-#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
+#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
     hasSupportBrightness = true;
 #endif
 
-#if defined(T_DECK)
-    // TDeck Doesn't seem to support brightness at all, at least not reliably
-    hasSupportBrightness = false;
-#endif
-
     enum optionsNumbers { Back, Brightness, ScreenColor };
     static const char *optionsArray[4] = {"Back"};
     static int optionsEnumArray[4] = {Back};
     int options = 1;
 
     // Only show brightness for B&W displays
-    if (hasSupportBrightness) {
+    if (hasSupportBrightness && !HAS_TFT) {
         optionsArray[options] = "Brightness";
         optionsEnumArray[options++] = Brightness;
     }
 
     // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
     optionsArray[options] = "Screen Color";
     optionsEnumArray[options++] = ScreenColor;
 #endif
@@ -1344,11 +985,7 @@ void menuHandler::powerMenu()
 #endif
 
     BannerOverlayOptions bannerOptions;
-#if defined(M5STACK_UNITC6L)
-    bannerOptions.message = "Power";
-#else
     bannerOptions.message = "Reboot / Shutdown";
-#endif
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = options;
     bannerOptions.optionsEnumPtr = optionsEnumArray;
@@ -1401,116 +1038,6 @@ void menuHandler::keyVerificationFinalPrompt()
     }
 }
 
-void menuHandler::FrameToggles_menu()
-{
-    enum optionsNumbers {
-        Finish,
-        nodelist,
-        nodelist_lastheard,
-        nodelist_hopsignal,
-        nodelist_distance,
-        nodelist_bearings,
-        gps,
-        lora,
-        clock,
-        show_favorites,
-        enumEnd
-    };
-    static const char *optionsArray[enumEnd] = {"Finish"};
-    static int optionsEnumArray[enumEnd] = {Finish};
-    int options = 1;
-
-    // Track last selected index (not enum value!)
-    static int lastSelectedIndex = 0;
-
-#ifndef USE_EINK
-    optionsArray[options] = screen->isFrameHidden("nodelist") ? "Show Node List" : "Hide Node List";
-    optionsEnumArray[options++] = nodelist;
-#endif
-#ifdef USE_EINK
-    optionsArray[options] = screen->isFrameHidden("nodelist_lastheard") ? "Show NL - Last Heard" : "Hide NL - Last Heard";
-    optionsEnumArray[options++] = nodelist_lastheard;
-    optionsArray[options] = screen->isFrameHidden("nodelist_hopsignal") ? "Show NL - Hops/Signal" : "Hide NL - Hops/Signal";
-    optionsEnumArray[options++] = nodelist_hopsignal;
-    optionsArray[options] = screen->isFrameHidden("nodelist_distance") ? "Show NL - Distance" : "Hide NL - Distance";
-    optionsEnumArray[options++] = nodelist_distance;
-#endif
-#if HAS_GPS
-    optionsArray[options] = screen->isFrameHidden("nodelist_bearings") ? "Show Bearings" : "Hide Bearings";
-    optionsEnumArray[options++] = nodelist_bearings;
-
-    optionsArray[options] = screen->isFrameHidden("gps") ? "Show Position" : "Hide Position";
-    optionsEnumArray[options++] = gps;
-#endif
-
-    optionsArray[options] = screen->isFrameHidden("lora") ? "Show LoRa" : "Hide LoRa";
-    optionsEnumArray[options++] = lora;
-
-    optionsArray[options] = screen->isFrameHidden("clock") ? "Show Clock" : "Hide Clock";
-    optionsEnumArray[options++] = clock;
-
-    optionsArray[options] = screen->isFrameHidden("show_favorites") ? "Show Favorites" : "Hide Favorites";
-    optionsEnumArray[options++] = show_favorites;
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Show/Hide Frames";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.InitialSelected = lastSelectedIndex; // Use index, not enum value
-
-    bannerOptions.bannerCallback = [options](int selected) mutable -> void {
-        // Find the index of selected in optionsEnumArray
-        int idx = 0;
-        for (; idx < options; ++idx) {
-            if (optionsEnumArray[idx] == selected)
-                break;
-        }
-        lastSelectedIndex = idx;
-
-        if (selected == Finish) {
-            screen->setFrames(Screen::FOCUS_DEFAULT);
-        } else if (selected == nodelist) {
-            screen->toggleFrameVisibility("nodelist");
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == nodelist_lastheard) {
-            screen->toggleFrameVisibility("nodelist_lastheard");
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == nodelist_hopsignal) {
-            screen->toggleFrameVisibility("nodelist_hopsignal");
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == nodelist_distance) {
-            screen->toggleFrameVisibility("nodelist_distance");
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == nodelist_bearings) {
-            screen->toggleFrameVisibility("nodelist_bearings");
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == gps) {
-            screen->toggleFrameVisibility("gps");
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == lora) {
-            screen->toggleFrameVisibility("lora");
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == clock) {
-            screen->toggleFrameVisibility("clock");
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        } else if (selected == show_favorites) {
-            screen->toggleFrameVisibility("show_favorites");
-            menuHandler::menuQueue = menuHandler::FrameToggles;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::handleMenuSwitch(OLEDDisplay *display)
 {
     if (menuQueue != menu_none)
@@ -1518,21 +1045,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     switch (menuQueue) {
     case menu_none:
         break;
-    case lora_Menu:
-        loraMenu();
-        break;
     case lora_picker:
         LoraRegionPicker();
         break;
-    case device_role_picker:
-        DeviceRolePicker();
-        break;
-    case radio_preset_picker:
-        RadioPresetPicker();
-        break;
-    case no_timeout_lora_picker:
-        LoraRegionPicker(0);
-        break;
     case TZ_picker:
         TZPicker();
         break;
@@ -1555,9 +1070,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case gps_toggle_menu:
         GPSToggleMenu();
         break;
-    case gps_format_menu:
-        GPSFormatMenu();
-        break;
 #endif
     case compass_point_north_menu:
         compassNorthMenu();
@@ -1589,9 +1101,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case remove_favorite:
         removeFavoriteMenu();
         break;
-    case trace_route_menu:
-        traceRouteMenu();
-        break;
     case test_menu:
         testMenu();
         break;
@@ -1619,9 +1128,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case power_menu:
         powerMenu();
         break;
-    case FrameToggles:
-        FrameToggles_menu();
-        break;
     case throttle_message:
         screen->showSimpleBanner("Too Many Attempts\nTry again in 60 seconds.", 5000);
         break;