Merge branch 'master' into moar-nxp

arch/portduino/portduino.ini

@@ -39,6 +39,7 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
+  -DNXP_WIRE=Wire
   -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs

arch/stm32/stm32.ini

@@ -31,8 +31,9 @@ build_flags =
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
+
 build_src_filter =
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp> -<.pio/*/*/I2CKeyPad/*>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
@@ -46,5 +47,4 @@ lib_deps =
   https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
-  I2CKeyPad
   OneButton

platformio.ini

@@ -72,7 +72,8 @@ lib_deps =
 	nanopb/Nanopb@0.4.91
 	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
 	erriez/ErriezCRC32@1.0.1
-  robtillaart/I2CKeyPad@0.5.0
+	https://github.com/meshtastic/SE05X#031f8feccae62689ebbd06914b44bd88547535af
+
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck

src/configuration.h

@@ -150,12 +150,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// I2C Keyboards (M5Stack, RAK14004, T-Deck, PCF8574A passive)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck)
 #define CARDKB_ADDR 0x5F
 #define TDECK_KB_ADDR 0x55
 #define BBQ10_KB_ADDR 0x1F
 #define MPR121_KB_ADDR 0x5A
-#define PCF8574A_ADDRESS 0x20
 
 // -----------------------------------------------------------------------------
 // SENSOR

src/detect/ScanI2C.cpp

@@ -31,8 +31,8 @@ ScanI2C::FoundDevice ScanI2C::firstRTC() const
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 {
-    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004, PCF8574A, MPR121KB, TCA8418KB};
-    return firstOfOrNONE(7, types);
+    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004, MPR121KB, TCA8418KB};
+    return firstOfOrNONE(6, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const

src/detect/ScanI2C.h

@@ -18,7 +18,6 @@ class ScanI2C
         TDECKKB,
         BBQ10KB,
         RAK14004,
-        PCF8574A,
         PMU_AXP192_AXP2101, // has the same adress as the TCA8418KB
         BME_680,
         BME_280,

src/detect/ScanI2CTwoWire.cpp

@@ -1,8 +1,8 @@
 #include "ScanI2CTwoWire.h"
 
 #if !MESHTASTIC_EXCLUDE_I2C
-
 #include "concurrency/LockGuard.h"
+#include <SE05X.h>
 #if defined(ARCH_PORTDUINO)
 #include "linux/LinuxHardwareI2C.h"
 #endif
@@ -210,9 +210,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address);
 
                 SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address);
-#ifndef HAS_TCA9535
-                SCAN_SIMPLE_CASE(PCF8574A_ADDRESS, PCF8574A, "PCF8574A", (uint8_t)addr.address);
-#endif
 #ifdef HAS_NCP5623
                 SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623", (uint8_t)addr.address);
 #endif
@@ -510,6 +507,10 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 if (len == 5 && memcmp(expectedInfo, info, len) == 0) {
                     LOG_INFO("NXP SE050 crypto chip found");
                     type = NXP_SE050;
+                    if (SE05X.begin()) {
+                        LOG_INFO("NXP Random %u", SE05X.random(65535));
+                        LOG_INFO("NXP Serial Number: %s", SE05X.serialNumber().c_str());
+                    }
 
                 } else {
                     LOG_INFO("FT6336U touchscreen found");

src/input/cardKbI2cImpl.cpp

@@ -9,10 +9,6 @@ CardKbI2cImpl::CardKbI2cImpl() : KbI2cBase("cardKB") {}
 
 void CardKbI2cImpl::init()
 {
-    if (kb_model == 0x12) {
-        disable();
-        return;
-    }
 #if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(I2C_NO_RESCAN)
     if (cardkb_found.address == 0x00) {
         LOG_DEBUG("Rescan for I2C keyboard");

src/input/peMatrixBase.cpp

@@ -1,88 +0,0 @@
-#include "peMatrixBase.h"
-
-#include "configuration.h"
-#include "detect/ScanI2C.h"
-
-extern ScanI2C::DeviceAddress cardkb_found;
-extern uint8_t kb_model;
-
-#if WIRE_INTERFACES_COUNT == 2 // defined in architecture.h
-I2CKeyPad keyPad(cardkb_found.address, cardkb_found.port == ScanI2C::WIRE1 ? &Wire1 : &Wire);
-#else
-I2CKeyPad keyPad(cardkb_found.address, &Wire);
-#endif
-
-PeMatrixBase::PeMatrixBase(const char *name) : concurrency::OSThread(name)
-{
-    this->_originName = name;
-}
-
-int32_t PeMatrixBase::runOnce()
-{
-    if (kb_model != 0x12) {
-        // Input device is not detected.
-        return disable();
-    }
-
-    if (firstTime) {
-        // This is the first time the OSThread library has called this function, so do port setup
-        firstTime = 0;
-        if (!keyPad.begin()) {
-            LOG_ERROR("Failed to initialize I2C keypad");
-            return disable();
-        }
-        keyPad.loadKeyMap(keymap);
-    } else {
-        if (keyPad.isPressed()) {
-            key = keyPad.getChar();
-            // debounce
-            if (key != prevkey) {
-                if (key != 0) {
-                    LOG_DEBUG("Key 0x%x pressed\n", key);
-                    // reset shift now that we have a keypress
-                    InputEvent e;
-                    e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
-                    e.source = this->_originName;
-                    switch (key) {
-                    case 0x1b: // ESC
-                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL;
-                        break;
-                    case 0x08: // Back
-                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_BACK;
-                        e.kbchar = key;
-                        break;
-                    case 0xb5: // Up
-                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP;
-                        break;
-                    case 0xb6: // Down
-                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN;
-                        break;
-                    case 0xb4: // Left
-                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT;
-                        e.kbchar = key;
-                        break;
-                    case 0xb7: // Right
-                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
-                        e.kbchar = key;
-                        break;
-                    case 0x0d: // Enter
-                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
-                        break;
-                    case 0x00: // nopress
-                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
-                        break;
-                    default: // all other keys
-                        e.inputEvent = ANYKEY;
-                        e.kbchar = key;
-                        break;
-                    }
-                    if (e.inputEvent != meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE) {
-                        this->notifyObservers(&e);
-                    }
-                }
-                prevkey = key;
-            }
-        }
-    }
-    return 100; // Keyscan every 100msec to avoid key bounce
-}

src/input/peMatrixBase.h

@@ -1,22 +0,0 @@
-#pragma once
-
-#include "InputBroker.h"
-#include "concurrency/OSThread.h"
-#include <I2CKeyPad.h>
-
-class PeMatrixBase : public Observable<const InputEvent *>, public concurrency::OSThread
-{
-  public:
-    explicit PeMatrixBase(const char *name);
-
-  protected:
-    virtual int32_t runOnce() override;
-
-  private:
-    const char *_originName;
-    bool firstTime = 1;
-    // char keymap[19] = "123A456B789C*0#DNF";  // N = NoKey, F = Fail
-    char keymap[19] = {0x1b, 0xb5, '3', 'A', 0xb4, 0x0d, 0xb7, 'B', '7', 0xb6, '9', 'C', 0x09, '0', 0x08, 'D', 'N', 'F'};
-    char key = 0;
-    char prevkey = 0;
-};

src/input/peMatrixImpl.cpp

@@ -1,16 +0,0 @@
-#include "peMatrixImpl.h"
-#include "InputBroker.h"
-
-PeMatrixImpl *peMatrixImpl;
-
-PeMatrixImpl::PeMatrixImpl() : PeMatrixBase("matrixPE") {}
-
-void PeMatrixImpl::init()
-{
-    if (kb_model != 0x12) {
-        disable();
-        return;
-    }
-
-    inputBroker->registerSource(this);
-}

src/input/peMatrixImpl.h

@@ -1,19 +0,0 @@
-#pragma once
-#include "main.h"
-#include "peMatrixBase.h"
-
-/**
- * @brief The idea behind this class to have static methods for the event handlers.
- *      Check attachInterrupt() at RotaryEncoderInteruptBase.cpp
- *      Technically you can have as many rotary encoders hardver attached
- *      to your device as you wish, but you always need to have separate event
- *      handlers, thus you need to have a RotaryEncoderInterrupt implementation.
- */
-class PeMatrixImpl : public PeMatrixBase
-{
-  public:
-    PeMatrixImpl();
-    void init();
-};
-
-extern PeMatrixImpl *peMatrixImpl;

src/main.cpp

@@ -607,9 +607,6 @@ void setup()
             // assign an arbitrary value to distinguish from other models
             kb_model = 0x11;
             break;
-        case ScanI2C::DeviceType::PCF8574A:
-            kb_model = 0x12;
-            break;
         case ScanI2C::DeviceType::MPR121KB:
             // assign an arbitrary value to distinguish from other models
             kb_model = 0x37;

src/modules/Modules.cpp

@@ -12,7 +12,6 @@
 #include "input/cardKbI2cImpl.h"
 #endif
 #include "input/kbMatrixImpl.h"
-#include "input/peMatrixImpl.h"
 #endif
 #if !MESHTASTIC_EXCLUDE_PKI
 #include "KeyVerificationModule.h"
@@ -182,10 +181,6 @@ void setupModules()
             kbMatrixImpl = new KbMatrixImpl();
             kbMatrixImpl->init();
 #endif // INPUTBROKER_MATRIX_TYPE
-
-        peMatrixImpl = new PeMatrixImpl();
-        peMatrixImpl->init();
-
 #ifdef INPUTBROKER_SERIAL_TYPE
             aSerialKeyboardImpl = new SerialKeyboardImpl();
             aSerialKeyboardImpl->init();

variants/rak4631/platformio.ini

@@ -11,6 +11,7 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631 -D RAK_4631
   -DRADIOLIB_EXCLUDE_SX128X=1
   -DRADIOLIB_EXCLUDE_SX127X=1
   -DRADIOLIB_EXCLUDE_LR11X0=1
+  -DNXP_WIRE=Wire
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631> +<mesh/eth/> +<mesh/api/> +<mqtt/>
 lib_deps = 
   ${nrf52840_base.lib_deps}

variants/seeed-sensecap-indicator/variant.h

@@ -17,9 +17,6 @@
 // #define ADC_CHANNEL ADC1_GPIO27_CHANNEL
 // #define ADC_MULTIPLIER 2
 
-// Portexpander
-#define HAS_TCA9535
-
 // ST7701 TFT LCD
 #define ST7701_CS (4 | IO_EXPANDER)
 #define ST7701_RS -1  // DC