Merge branch 'master' into portexpander-keyboard

# Conflicts:
#	src/input/cardKbI2cImpl.cpp

arch/stm32/stm32.ini

@@ -31,9 +31,8 @@ build_flags =
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-
 build_src_filter =
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp> -<.pio/*/*/I2CKeyPad/*>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
@@ -47,4 +46,5 @@ lib_deps =
   https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
+  I2CKeyPad
   OneButton

platformio.ini

@@ -26,7 +26,6 @@ build_flags = -Wno-missing-field-initializers
 	-DUSE_THREAD_NAMES
 	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
 	-DPB_ENABLE_MALLOC=1
-	-DRADIOLIB_LOW_LEVEL=1
 	-DRADIOLIB_EXCLUDE_CC1101=1
 	-DRADIOLIB_EXCLUDE_NRF24=1
 	-DRADIOLIB_EXCLUDE_RF69=1
@@ -73,6 +72,7 @@ lib_deps =
 	nanopb/Nanopb@0.4.91
 	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
 	erriez/ErriezCRC32@1.0.1
+  robtillaart/I2CKeyPad@0.5.0
 
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck

src/configuration.h

@@ -150,11 +150,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Define if screen should be mirrored left to right
 // #define SCREEN_MIRROR
 
-// I2C Keyboards (M5Stack, RAK14004, T-Deck)
+// I2C Keyboards (M5Stack, RAK14004, T-Deck, PCF8574A passive)
 #define CARDKB_ADDR 0x5F
 #define TDECK_KB_ADDR 0x55
 #define BBQ10_KB_ADDR 0x1F
 #define MPR121_KB_ADDR 0x5A
+#define PCF8574A_ADDRESS 0x20
 
 // -----------------------------------------------------------------------------
 // SENSOR

src/detect/ScanI2C.cpp

@@ -31,8 +31,8 @@ ScanI2C::FoundDevice ScanI2C::firstRTC() const
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 {
-    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004, MPR121KB, TCA8418KB};
+    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004, PCF8574A, MPR121KB, TCA8418KB};
-    return firstOfOrNONE(6, types);
+    return firstOfOrNONE(7, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const

src/detect/ScanI2C.h

@@ -18,6 +18,7 @@ class ScanI2C
         TDECKKB,
         BBQ10KB,
         RAK14004,
+        PCF8574A,
         PMU_AXP192_AXP2101, // has the same adress as the TCA8418KB
         BME_680,
         BME_280,

src/detect/ScanI2CTwoWire.cpp

@@ -210,6 +210,9 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address);
 
                 SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address);
+#ifndef HAS_TCA9535
+                SCAN_SIMPLE_CASE(PCF8574A_ADDRESS, PCF8574A, "PCF8574A", (uint8_t)addr.address);
+#endif
 #ifdef HAS_NCP5623
                 SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623", (uint8_t)addr.address);
 #endif

src/input/cardKbI2cImpl.cpp

@@ -9,6 +9,10 @@ CardKbI2cImpl::CardKbI2cImpl() : KbI2cBase("cardKB") {}
 
 void CardKbI2cImpl::init()
 {
+    if (kb_model == 0x12) {
+        disable();
+        return;
+    }
 #if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(I2C_NO_RESCAN)
     if (cardkb_found.address == 0x00) {
         LOG_DEBUG("Rescan for I2C keyboard");

src/input/peMatrixBase.cpp

@@ -0,0 +1,88 @@
+#include "peMatrixBase.h"
+
+#include "configuration.h"
+#include "detect/ScanI2C.h"
+
+extern ScanI2C::DeviceAddress cardkb_found;
+extern uint8_t kb_model;
+
+#if WIRE_INTERFACES_COUNT == 2 // defined in architecture.h
+I2CKeyPad keyPad(cardkb_found.address, cardkb_found.port == ScanI2C::WIRE1 ? &Wire1 : &Wire);
+#else
+I2CKeyPad keyPad(cardkb_found.address, &Wire);
+#endif
+
+PeMatrixBase::PeMatrixBase(const char *name) : concurrency::OSThread(name)
+{
+    this->_originName = name;
+}
+
+int32_t PeMatrixBase::runOnce()
+{
+    if (kb_model != 0x12) {
+        // Input device is not detected.
+        return disable();
+    }
+
+    if (firstTime) {
+        // This is the first time the OSThread library has called this function, so do port setup
+        firstTime = 0;
+        if (!keyPad.begin()) {
+            LOG_ERROR("Failed to initialize I2C keypad");
+            return disable();
+        }
+        keyPad.loadKeyMap(keymap);
+    } else {
+        if (keyPad.isPressed()) {
+            key = keyPad.getChar();
+            // debounce
+            if (key != prevkey) {
+                if (key != 0) {
+                    LOG_DEBUG("Key 0x%x pressed\n", key);
+                    // reset shift now that we have a keypress
+                    InputEvent e;
+                    e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+                    e.source = this->_originName;
+                    switch (key) {
+                    case 0x1b: // ESC
+                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL;
+                        break;
+                    case 0x08: // Back
+                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_BACK;
+                        e.kbchar = key;
+                        break;
+                    case 0xb5: // Up
+                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP;
+                        break;
+                    case 0xb6: // Down
+                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN;
+                        break;
+                    case 0xb4: // Left
+                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT;
+                        e.kbchar = key;
+                        break;
+                    case 0xb7: // Right
+                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
+                        e.kbchar = key;
+                        break;
+                    case 0x0d: // Enter
+                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
+                        break;
+                    case 0x00: // nopress
+                        e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE;
+                        break;
+                    default: // all other keys
+                        e.inputEvent = ANYKEY;
+                        e.kbchar = key;
+                        break;
+                    }
+                    if (e.inputEvent != meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE) {
+                        this->notifyObservers(&e);
+                    }
+                }
+                prevkey = key;
+            }
+        }
+    }
+    return 100; // Keyscan every 100msec to avoid key bounce
+}

src/input/peMatrixBase.h

@@ -0,0 +1,22 @@
+#pragma once
+
+#include "InputBroker.h"
+#include "concurrency/OSThread.h"
+#include <I2CKeyPad.h>
+
+class PeMatrixBase : public Observable<const InputEvent *>, public concurrency::OSThread
+{
+  public:
+    explicit PeMatrixBase(const char *name);
+
+  protected:
+    virtual int32_t runOnce() override;
+
+  private:
+    const char *_originName;
+    bool firstTime = 1;
+    // char keymap[19] = "123A456B789C*0#DNF";  // N = NoKey, F = Fail
+    char keymap[19] = {0x1b, 0xb5, '3', 'A', 0xb4, 0x0d, 0xb7, 'B', '7', 0xb6, '9', 'C', 0x09, '0', 0x08, 'D', 'N', 'F'};
+    char key = 0;
+    char prevkey = 0;
+};

src/input/peMatrixImpl.cpp

@@ -0,0 +1,16 @@
+#include "peMatrixImpl.h"
+#include "InputBroker.h"
+
+PeMatrixImpl *peMatrixImpl;
+
+PeMatrixImpl::PeMatrixImpl() : PeMatrixBase("matrixPE") {}
+
+void PeMatrixImpl::init()
+{
+    if (kb_model != 0x12) {
+        disable();
+        return;
+    }
+
+    inputBroker->registerSource(this);
+}

src/input/peMatrixImpl.h

@@ -0,0 +1,19 @@
+#pragma once
+#include "main.h"
+#include "peMatrixBase.h"
+
+/**
+ * @brief The idea behind this class to have static methods for the event handlers.
+ *      Check attachInterrupt() at RotaryEncoderInteruptBase.cpp
+ *      Technically you can have as many rotary encoders hardver attached
+ *      to your device as you wish, but you always need to have separate event
+ *      handlers, thus you need to have a RotaryEncoderInterrupt implementation.
+ */
+class PeMatrixImpl : public PeMatrixBase
+{
+  public:
+    PeMatrixImpl();
+    void init();
+};
+
+extern PeMatrixImpl *peMatrixImpl;

src/main.cpp

@@ -214,8 +214,6 @@ bool pauseBluetoothLogging = false;
 
 bool pmu_found;
 
-uint8_t pa_fan_percentage = 50;
-
 #if !MESHTASTIC_EXCLUDE_I2C
 // Array map of sensor types with i2c address and wire as we'll find in the i2c scan
 std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1] = {};
@@ -609,6 +607,9 @@ void setup()
             // assign an arbitrary value to distinguish from other models
             kb_model = 0x11;
             break;
+        case ScanI2C::DeviceType::PCF8574A:
+            kb_model = 0x12;
+            break;
         case ScanI2C::DeviceType::MPR121KB:
             // assign an arbitrary value to distinguish from other models
             kb_model = 0x37;
@@ -1377,36 +1378,16 @@ void setup()
     mqttInit();
 #endif
 
-#ifdef RADIO_FAN_EN
+#ifdef RF95_FAN_EN
-    // Ability to disable FAN if PIN has been set with RADIO_FAN_EN.
+    // Ability to disable FAN if PIN has been set with RF95_FAN_EN.
     // Make sure LoRa has been started before disabling FAN.
-#ifdef RADIO_FAN_PWM
+    if (config.lora.pa_fan_disabled)
-#if defined(ARCH_ESP32)
+        digitalWrite(RF95_FAN_EN, LOW ^ 0);
-    // Set up PWM at Channel 1 at 25KHz, using 8-bit resolution
-    // Turn ON/OFF fan to the specified value if enabled by config.
-    // code by https://github.com/gjelsoe/
-    if (ledcSetup(1, 25000, 8)) {
-        ledcAttachPin(RADIO_FAN_EN, 1);
-        LOG_INFO("PWM init C1 P%d\n", RADIO_FAN_EN);
-        // Set PWM duty cycle based on fan disabled state
-        ledcWrite(1, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-    } else {
-        LOG_WARN("PWM init fail P%d\n", RADIO_FAN_EN);
-    }
-#elif defined(ARCH_NRF52)
-    pinMode(RADIO_FAN_EN, OUTPUT);
-    analogWrite(RADIO_FAN_EN, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#endif
-#else
-    // Set up as ON/OFF switch of fan
-    pinMode(RADIO_FAN_EN, OUTPUT);
-    digitalWrite(RADIO_FAN_EN, LOW ^ 0);
-#endif
 #endif
 
 #ifndef ARCH_PORTDUINO
 
-    // Initialize Wifi
+        // Initialize Wifi
 #if HAS_WIFI
     initWifi();
 #endif

src/main.h

@@ -78,8 +78,6 @@ extern uint32_t shutdownAtMsec;
 
 extern uint32_t serialSinceMsec;
 
-extern uint8_t pa_fan_percentage;
-
 // If a thread does something that might need for it to be rescheduled ASAP it can set this flag
 // This will suppress the current delay and instead try to run ASAP.
 extern bool runASAP;

src/mesh/LR11x0Interface.cpp

@@ -3,7 +3,6 @@
 #include "Throttle.h"
 #include "configuration.h"
 #include "error.h"
-#include "main.h"
 #include "mesh/NodeDB.h"
 #ifdef LR11X0_DIO_AS_RF_SWITCH
 #include "rfswitch.h"
@@ -55,8 +54,6 @@ template <typename T> bool LR11x0Interface<T>::init()
     digitalWrite(LR11X0_POWER_EN, HIGH);
 #endif
 
-    enableFan();
-
 #if ARCH_PORTDUINO
     float tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
 // FIXME: correct logic to default to not using TCXO if no voltage is specified for LR11x0_DIO3_TCXO_VOLTAGE

src/mesh/RF95Interface.cpp

@@ -154,7 +154,10 @@ bool RF95Interface::init()
     digitalWrite(RF95_TXEN, 0);
 #endif
 
-    enableFan();
+#ifdef RF95_FAN_EN
+    pinMode(RF95_FAN_EN, OUTPUT);
+    digitalWrite(RF95_FAN_EN, 1);
+#endif
 
 #ifdef RF95_RXEN
     pinMode(RF95_RXEN, OUTPUT);
@@ -327,7 +330,10 @@ bool RF95Interface::sleep()
     // put chipset into sleep mode
     setStandby(); // First cancel any active receiving/sending
     lora->sleep();
-    disableFan();
+
+#ifdef RF95_FAN_EN
+    digitalWrite(RF95_FAN_EN, 0);
+#endif
 
     return true;
 }

src/mesh/RadioLibInterface.cpp

@@ -531,37 +531,4 @@ bool RadioLibInterface::startSend(meshtastic_MeshPacket *txp)
 
         return res == RADIOLIB_ERR_NONE;
     }
-}
-
-void RadioLibInterface::enableFan()
-{
-#ifdef RADIO_FAN_EN
-
-#ifdef RADIO_FAN_PWM
-#if defined(ARCH_ESP32)
-    ledcWrite(1, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#elif defined(ARCH_NRF52)
-    analogWrite(RADIO_FAN_EN, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#endif
-#else
-    pinMode(RADIO_FAN_EN, OUTPUT);
-    digitalWrite(RADIO_FAN_EN, 1);
-#endif
-#endif
-}
-
-void RadioLibInterface::disableFan()
-{
-#ifdef RADIO_FAN_EN
-#ifdef RADIO_FAN_PWM
-#if defined(ARCH_ESP32)
-    ledcWrite(1, 0);
-#elif defined(ARCH_NRF52)
-    analogWrite(RADIO_FAN_EN, 0);
-#endif
-#else
-    pinMode(RADIO_FAN_EN, OUTPUT);
-    digitalWrite(RADIO_FAN_EN, 0);
-#endif
-#endif
 }

src/mesh/RadioLibInterface.h

@@ -146,9 +146,6 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified
     /** Attempt to find a packet in the TxQueue. Returns true if the packet was found. */
     virtual bool findInTxQueue(NodeNum from, PacketId id) override;
 
-    void enableFan();
-    void disableFan();
-
   private:
     /** if we have something waiting to send, start a short (random) timer so we can come check for collision before actually
      * doing the transmit */

src/mesh/SX126xInterface.cpp

@@ -52,8 +52,6 @@ template <typename T> bool SX126xInterface<T>::init()
     pinMode(SX126X_POWER_EN, OUTPUT);
 #endif
 
-    enableFan();
-
 #if ARCH_PORTDUINO
     tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
     if (settingsMap[sx126x_ant_sw_pin] != RADIOLIB_NC) {

src/mesh/SX128xInterface.cpp

@@ -35,7 +35,10 @@ template <typename T> bool SX128xInterface<T>::init()
     digitalWrite(SX128X_POWER_EN, HIGH);
 #endif
 
-    enableFan();
+#ifdef RF95_FAN_EN
+    pinMode(RF95_FAN_EN, OUTPUT);
+    digitalWrite(RF95_FAN_EN, 1);
+#endif
 
 #if ARCH_PORTDUINO
     if (settingsMap[rxen_pin] != RADIOLIB_NC) {

src/modules/AdminModule.cpp

@@ -706,21 +706,13 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             requiresReboot = false;
         }
 
-#ifdef RADIO_FAN_EN
+#ifdef RF95_FAN_EN
-#ifdef RADIO_FAN_PWM
-#if defined(ARCH_ESP32)
-        ledcWrite(1, c.payload_variant.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#elif defined(ARCH_NFR52)
-        analogWrite(RADIO_FAN_EN, c.payload_variant.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#endif
-#else
         // Turn PA off if disabled by config
         if (c.payload_variant.lora.pa_fan_disabled) {
-            digitalWrite(RADIO_FAN_EN, LOW ^ 0);
+            digitalWrite(RF95_FAN_EN, LOW ^ 0);
         } else {
-            digitalWrite(RADIO_FAN_EN, HIGH ^ 0);
+            digitalWrite(RF95_FAN_EN, HIGH ^ 0);
         }
-#endif
 #endif
         config.lora = c.payload_variant.lora;
         // If we're setting region for the first time, init the region

src/modules/Modules.cpp

@@ -12,6 +12,7 @@
 #include "input/cardKbI2cImpl.h"
 #endif
 #include "input/kbMatrixImpl.h"
+#include "input/peMatrixImpl.h"
 #endif
 #if !MESHTASTIC_EXCLUDE_PKI
 #include "KeyVerificationModule.h"
@@ -181,6 +182,10 @@ void setupModules()
             kbMatrixImpl = new KbMatrixImpl();
             kbMatrixImpl->init();
 #endif // INPUTBROKER_MATRIX_TYPE
+
+        peMatrixImpl = new PeMatrixImpl();
+        peMatrixImpl->init();
+
 #ifdef INPUTBROKER_SERIAL_TYPE
             aSerialKeyboardImpl = new SerialKeyboardImpl();
             aSerialKeyboardImpl->init();

variants/betafpv_2400_tx_micro/variant.h

@@ -12,7 +12,7 @@
 #define LORA_MISO 19
 #define LORA_MOSI 23
 #define LORA_CS 5
-#define RADIO_FAN_EN 17
+#define RF95_FAN_EN 17
 
 // #define LED_PIN 16 // This is a LED_WS2812 not a standard LED
 #define HAS_NEOPIXEL                         // Enable the use of neopixels

variants/radiomaster_900_bandit/variant.h

@@ -46,8 +46,7 @@
   FAN is active at 250mW on it's ExpressLRS Firmware.
   This FAN has TACHO signal on Pin 27 for use with PWM.
 */
-#define RADIO_FAN_EN 2
+#define RF95_FAN_EN 2
-#define RADIO_FAN_PWM
 
 /*
   LED PIN setup and it has a NeoPixel LED.

variants/radiomaster_900_bandit_nano/variant.h

@@ -32,7 +32,7 @@
   This unit has a FAN built-in.
   FAN is active at 250mW on it's ExpressLRS Firmware.
 */
-#define RADIO_FAN_EN 2
+#define RF95_FAN_EN 2
 
 /*
   LED PIN setup.

variants/radiomaster_nomad_gemini/platformio.ini

@@ -1,20 +0,0 @@
-[env:radiomaster_nomad_gemini]
-extends = esp32_base
-board = esp32doit-devkit-v1
-build_flags =
-  ${esp32_base.build_flags}
-  -DRADIOMASTER_NOMAD_GEMINI
-  -DPRIVATE_HW
-  -DVTABLES_IN_FLASH=1
-  -DCONFIG_DISABLE_HAL_LOCKS=1
-  -O2
-  -Ivariants/radiomaster_nomad_gemini
-  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
-  -DMESHTASTIC_EXCLUDE_I2C=1
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_SX126X=1
-board_build.f_cpu = 240000000L
-upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}

variants/radiomaster_nomad_gemini/rfswitch.h

@@ -1,56 +0,0 @@
-#include "RadioLib.h"
-
-static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7,
-                                             RADIOLIB_LR11X0_DIO8, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[] = {
-    // mode                  DIO5  DIO6 DIO7 DIO8
-    {LR11x0::MODE_STBY, {LOW, LOW, LOW, LOW}},   {LR11x0::MODE_RX, {LOW, LOW, HIGH, LOW}},
-    {LR11x0::MODE_TX, {LOW, LOW, LOW, HIGH}},    {LR11x0::MODE_TX_HP, {LOW, LOW, LOW, HIGH}},
-    {LR11x0::MODE_TX_HF, {LOW, HIGH, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, LOW, LOW}},
-    {LR11x0::MODE_WIFI, {HIGH, LOW, LOW, LOW}},  END_OF_MODE_TABLE,
-};
-
-/*
-
-DIO5: RXEN 2.4GHz
-DIO6: TXEN 2.4GHz
-DIO7: RXEN 900MHz
-DIO8: TXEN 900MHz
-
-
-  "radio_dcdc": true,
-  "radio_rfo_hf": true,
-
-    "power_apc2": 26,
-    "power_min": 0,
-    "power_high": 6,
-    "power_max": 6,
-    "power_default": 3,
-    "power_control": 3, POWER_OUTPUT_DACWRITE // use internal dacWrite function to set value on GPIO_PIN_RFamp_APC2
-                         [0,   1,   2,   3,   4,   5,   6 ] // 0-6
-    "power_values":      [120, 120, 120, 120, 120, 120, 95] // DAC Value
-    "power_values2":     [-17, -16, -14, -11, -7,  -3,  5 ] // 900M
-    "power_values_dual": [-18, -14,  -8,  -6, -2,   3,  5 ] // 2.4G
-
-    // default value 0 means direct!
-#define POWER_OUTPUT_DACWRITE (hardware_int(HARDWARE_power_control)==3)
-#define POWER_OUTPUT_VALUES hardware_i16_array(HARDWARE_power_values)
-#define POWER_OUTPUT_VALUES_COUNT hardware_int(HARDWARE_power_values_count)
-#define POWER_OUTPUT_VALUES2 hardware_i16_array(HARDWARE_power_values2)
-#define POWER_OUTPUT_VALUES_DUAL hardware_i16_array(HARDWARE_power_values_dual)
-#define POWER_OUTPUT_VALUES_DUAL_COUNT hardware_int(HARDWARE_power_values_dual_count)
-
-#define GPIO_PIN_FAN_EN hardware_pin(HARDWARE_misc_fan_en)
-
-    case PWR_10mW: return 10;
-    case PWR_25mW: return 14;
-    case PWR_50mW: return 17;
-    case PWR_100mW: return 20;
-    case PWR_250mW: return 24;
-    case PWR_500mW: return 27;
-    case PWR_1000mW: return 30;
-
-    95 -> +25dBm
-    120 -> +24dBm
-*/

variants/radiomaster_nomad_gemini/variant.h

@@ -1,60 +0,0 @@
-#define HAS_SCREEN 0
-#define HAS_WIRE 0
-#define HAS_GPS 0
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
-
-#define PIN_SPI_MISO 33
-#define PIN_SPI_MOSI 32
-#define PIN_SPI_SCK 25
-#define PIN_SPI_NSS 27
-
-#define LORA_RESET 15
-#define LORA_DIO1 37
-#define LORA_DIO2 36
-#define LORA_SCK PIN_SPI_SCK
-#define LORA_MISO PIN_SPI_MISO
-#define LORA_MOSI PIN_SPI_MOSI
-#define LORA_CS PIN_SPI_NSS
-
-// supported modules list
-#define USE_LR1121
-
-#define LR1121_IRQ_PIN LORA_DIO1
-#define LR1121_NRESET_PIN LORA_RESET
-#define LR1121_BUSY_PIN LORA_DIO2
-#define LR1121_SPI_NSS_PIN LORA_CS
-#define LR1121_SPI_SCK_PIN LORA_SCK
-#define LR1121_SPI_MOSI_PIN LORA_MOSI
-#define LR1121_SPI_MISO_PIN LORA_MISO
-
-// this is correct and sets the cap for the Sub-GHz part
-#define LR1110_MAX_POWER 5
-// 2.4G Part
-#define LR1120_MAX_POWER 5
-
-#define POWER_SHIFT -20
-
-// not yet implemented
-#define JANUS_RADIO
-#define LR1121_IRQ2_PIN 34
-#define LR1121_NRESET2_PIN 21
-#define LR1121_BUSY2_PIN 39
-#define LR1121_SPI_NSS2_PIN 13
-
-// TODO: check if this is correct
-// #define LR11X0_DIO3_TCXO_VOLTAGE 1.6
-#define LR11X0_DIO_AS_RF_SWITCH
-
-#define HAS_NEOPIXEL                         // Enable the use of neopixels
-#define NEOPIXEL_COUNT 2                     // How many neopixels are connected
-#define NEOPIXEL_DATA 22                     // GPIO pin used to send data to the neopixels
-#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // Type of neopixels in use
-#define ENABLE_AMBIENTLIGHTING               // Turn on Ambient Lighting
-
-#define BUTTON_PIN 34
-#define BUTTON_NEED_PULLUP
-
-#undef EXT_NOTIFY_OUT
-
-#define RADIO_FAN_EN 2

variants/seeed-sensecap-indicator/variant.h

@@ -17,6 +17,9 @@
 // #define ADC_CHANNEL ADC1_GPIO27_CHANNEL
 // #define ADC_MULTIPLIER 2
 
+// Portexpander
+#define HAS_TCA9535
+
 // ST7701 TFT LCD
 #define ST7701_CS (4 | IO_EXPANDER)
 #define ST7701_RS -1  // DC