Additional VID for Thinknode m1 usb

2026-01-08 19:07:26 +00:00 · 2025-07-04 08:14:47 -05:00
98 changed files with 672 additions and 1996 deletions
--- a/.github/workflows/build_esp32.yml
+++ b/.github/workflows/build_esp32.yml
@@ -11,30 +11,27 @@ permissions: read-all

 jobs:
  build-esp32:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4

-      - name: Get release version string
-        shell: bash
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
      - name: Build ESP32
        id: build
-        uses: meshtastic/gh-action-firmware@main
+        uses: ./.github/actions/build-variant
        with:
-          pio_platform: esp32
-          pio_env: ${{ inputs.board }}
-          pio_target: build
-          ota_firmware_source: firmware.bin
-          ota_firmware_target: release/bleota.bin
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-esp32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware.bin
+          ota-firmware-target: release/bleota.bin
+          artifact-paths: |
            release/*.bin
            release/*.elf
+          #include-web-ui: true
+          arch: esp32
--- a/.github/workflows/build_esp32_c3.yml
+++ b/.github/workflows/build_esp32_c3.yml
@@ -11,30 +11,27 @@ permissions: read-all

 jobs:
  build-esp32-c3:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4

-      - name: Get release version string
-        shell: bash
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
      - name: Build ESP32-C3
        id: build
-        uses: meshtastic/gh-action-firmware@main
+        uses: ./.github/actions/build-variant
        with:
-          pio_platform: esp32
-          pio_env: ${{ inputs.board }}
-          pio_target: build
-          ota_firmware_source: firmware-c3.bin
-          ota_firmware_target: release/bleota-c3.bin
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-esp32c3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-c3.bin
+          ota-firmware-target: release/bleota-c3.bin
+          artifact-paths: |
            release/*.bin
            release/*.elf
+          #include-web-ui: true
+          arch: esp32c3
--- a/.github/workflows/build_esp32_c6.yml
+++ b/.github/workflows/build_esp32_c6.yml
@@ -11,30 +11,27 @@ permissions: read-all

 jobs:
  build-esp32-c6:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4

-      - name: Get release version string
-        shell: bash
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
      - name: Build ESP32-C6
        id: build
-        uses: meshtastic/gh-action-firmware@main
+        uses: ./.github/actions/build-variant
        with:
-          pio_platform: esp32
-          pio_env: ${{ inputs.board }}
-          pio_target: build
-          ota_firmware_source: firmware-c3.bin
-          ota_firmware_target: release/bleota-c3.bin
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-esp32c6-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-c3.bin
+          ota-firmware-target: release/bleota-c3.bin
+          artifact-paths: |
            release/*.bin
            release/*.elf
+          #include-web-ui: true
+          arch: esp32c6
--- a/.github/workflows/build_esp32_s3.yml
+++ b/.github/workflows/build_esp32_s3.yml
@@ -11,30 +11,27 @@ permissions: read-all

 jobs:
  build-esp32-s3:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4

-      - name: Get release version string
-        shell: bash
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
      - name: Build ESP32-S3
        id: build
-        uses: meshtastic/gh-action-firmware@main
+        uses: ./.github/actions/build-variant
        with:
-          pio_platform: esp32
-          pio_env: ${{ inputs.board }}
-          pio_target: build
-          ota_firmware_source: firmware-s3.bin
-          ota_firmware_target: release/bleota-s3.bin
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-esp32s3-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-s3.bin
+          ota-firmware-target: release/bleota-s3.bin
+          artifact-paths: |
            release/*.bin
            release/*.elf
+          #include-web-ui: true
+          arch: esp32s3
--- a/.github/workflows/build_nrf52.yml
+++ b/.github/workflows/build_nrf52.yml
@@ -11,30 +11,20 @@ permissions: read-all

 jobs:
  build-nrf52:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4

-      - name: Get release version string
-        shell: bash
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
      - name: Build NRF52
        id: build
-        uses: meshtastic/gh-action-firmware@main
+        uses: ./.github/actions/build-variant
        with:
-          pio_platform: nrf52
-          pio_env: ${{ inputs.board }}
-          pio_target: build
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-nrf52840-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-nrf52.sh
+          artifact-paths: |
+            release/*.hex
            release/*.uf2
            release/*.elf
-            release/*.hex
-            release/*-ota.zip
+            release/*.zip
+          arch: nrf52840
--- a/.github/workflows/build_rpi2040.yml
+++ b/.github/workflows/build_rpi2040.yml
@@ -11,28 +11,18 @@ permissions: read-all

 jobs:
  build-rpi2040:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4

-      - name: Get release version string
-        shell: bash
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
      - name: Build Raspberry Pi 2040
        id: build
-        uses: meshtastic/gh-action-firmware@main
+        uses: ./.github/actions/build-variant
        with:
-          pio_platform: rp2xx0
-          pio_env: ${{ inputs.board }}
-          pio_target: build
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-rp2040-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-rpi2040.sh
+          artifact-paths: |
            release/*.uf2
            release/*.elf
+          arch: rp2040
--- a/.github/workflows/build_stm32.yml
+++ b/.github/workflows/build_stm32.yml
@@ -11,29 +11,19 @@ permissions: read-all

 jobs:
  build-stm32:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4

-      - name: Get release version string
-        shell: bash
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
      - name: Build STM32WL
        id: build
-        uses: meshtastic/gh-action-firmware@main
+        uses: ./.github/actions/build-variant
        with:
-          pio_platform: stm32wl
-          pio_env: ${{ inputs.board }}
-          pio_target: build
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-stm32-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-stm32.sh
+          artifact-paths: |
            release/*.hex
            release/*.bin
            release/*.elf
+          arch: stm32
--- a/.github/workflows/daily_packaging.yml
+++ b/.github/workflows/daily_packaging.yml
@@ -30,7 +30,7 @@ jobs:
    strategy:
      fail-fast: false
      matrix:
-        series: [plucky, noble, jammy]
+        series: [plucky, oracular, noble, jammy]
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: ppa:meshtastic/daily
--- a/.github/workflows/main_matrix.yml
+++ b/.github/workflows/main_matrix.yml
@@ -135,7 +135,6 @@ jobs:
      board: ${{ matrix.board }}

  build-debian-src:
-    if: github.repository == 'meshtastic/firmware'
    uses: ./.github/workflows/build_debian_src.yml
    with:
      series: UNRELEASED
@@ -426,7 +425,7 @@ jobs:
          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

  publish-firmware:
-    runs-on: ubuntu-24.04
+    runs-on: ubuntu-latest
    if: ${{ github.event_name == 'workflow_dispatch' }}
    needs: [release-firmware]
    env:
--- a/.github/workflows/nightly.yml
+++ b/.github/workflows/nightly.yml
@@ -8,7 +8,6 @@ permissions: read-all

 jobs:
  trunk_check:
-    if: github.repository == 'meshtastic/firmware'
    name: Trunk Check and Upload
    runs-on: ubuntu-24.04

@@ -22,7 +21,6 @@ jobs:
          trunk-token: ${{ secrets.TRUNK_TOKEN }}

  trunk_upgrade:
-    if: github.repository == 'meshtastic/firmware'
    # See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
    name: Trunk Upgrade (PR)
    runs-on: ubuntu-24.04
--- a/.github/workflows/release_channels.yml
+++ b/.github/workflows/release_channels.yml
@@ -20,7 +20,7 @@ jobs:
    strategy:
      fail-fast: false
      matrix:
-        series: [plucky, noble, jammy]
+        series: [plucky, oracular, noble, jammy]
    uses: ./.github/workflows/package_ppa.yml
    with:
      ppa_repo: |-
--- a/.github/workflows/sec_sast_semgrep_cron.yml
+++ b/.github/workflows/sec_sast_semgrep_cron.yml
@@ -13,7 +13,6 @@ permissions:

 jobs:
  semgrep-full:
-    if: github.repository == 'meshtastic/firmware'
    runs-on: ubuntu-24.04
    container:
      image: semgrep/semgrep
--- a/.github/workflows/stale_bot.yml
+++ b/.github/workflows/stale_bot.yml
@@ -11,7 +11,6 @@ permissions:

 jobs:
  stale_issues:
-    if: github.repository == 'meshtastic/firmware'
    name: Close Stale Issues
    runs-on: ubuntu-latest

--- a/.github/workflows/test_native.yml
+++ b/.github/workflows/test_native.yml
@@ -143,7 +143,7 @@ jobs:
          merge-multiple: true

      - name: Test Report
-        uses: dorny/test-reporter@v2.1.1
+        uses: dorny/test-reporter@v2.1.0
        with:
          name: PlatformIO Tests
          path: testreport.xml
--- a/.github/workflows/tests.yml
+++ b/.github/workflows/tests.yml
@@ -12,11 +12,9 @@ permissions:

 jobs:
  native-tests:
-    if: github.repository == 'meshtastic/firmware'
    uses: ./.github/workflows/test_native.yml

  hardware-tests:
-    if: github.repository == 'meshtastic/firmware'
    runs-on: test-runner
    steps:
      - name: Checkout code
--- a/.trunk/trunk.yaml
+++ b/.trunk/trunk.yaml
@@ -8,15 +8,15 @@ plugins:
      uri: https://github.com/trunk-io/plugins
 lint:
  enabled:
-    - checkov@3.2.450
-    - renovate@41.29.1
+    - checkov@3.2.447
+    - renovate@41.17.2
    - prettier@3.6.2
    - trufflehog@3.89.2
    - yamllint@1.37.1
-    - bandit@1.8.6
-    - trivy@0.64.1
+    - bandit@1.8.5
+    - trivy@0.64.0
    - taplo@0.9.3
-    - ruff@0.12.2
+    - ruff@0.12.1
    - isort@6.0.1
    - markdownlint@0.45.0
    - oxipng@9.1.5
--- a/arch/portduino/portduino.ini
+++ b/arch/portduino/portduino.ini
@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
  # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/6cb7a455b440dd0738e8ed74a18136ed5cf7ea63.zip
+  https://github.com/meshtastic/platform-native/archive/681ee029207e9fd040afa223df6e54074cbbe084.zip
 framework = arduino

 build_src_filter = 
@@ -30,8 +30,6 @@ lib_deps =
  lovyan03/LovyanGFX@^1.2.0
  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
-  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
-	adafruit/Adafruit seesaw Library@1.7.9

 build_flags =
  ${arduino_base.build_flags}
@@ -50,7 +48,4 @@ build_flags =
  -std=gnu17
  -std=c++17

-lib_ignore =
-  Adafruit NeoPixel
-  Adafruit ST7735 and ST7789 Library
-  SD
+lib_ignore = Adafruit NeoPixel
--- a/arch/stm32/stm32.ini
+++ b/arch/stm32/stm32.ini
@@ -47,4 +47,4 @@ lib_deps =
  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip

 lib_ignore =
-  OneButton
+  mathertel/OneButton@2.6.1
--- a/bin/build-esp32.sh
+++ b/bin/build-esp32.sh
@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true

 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1

 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
--- a/bin/build-native.sh
+++ b/bin/build-native.sh
@@ -25,7 +25,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true

 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg install --environment "$PIO_ENV" || platformioFailed
+pio pkg update --environment "$PIO_ENV" || platformioFailed
 pio run --environment "$PIO_ENV" || platformioFailed
 cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR
--- a/bin/build-nrf52.sh
+++ b/bin/build-nrf52.sh
@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true

 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1

 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
--- a/bin/build-rpi2040.sh
+++ b/bin/build-rpi2040.sh
@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true

 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1

 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
--- a/bin/build-stm32wl.sh
+++ b/bin/build-stm32wl.sh
@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true

 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg install -e $1
+platformio pkg update -e $1

 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
--- a/bin/config-dist.yaml
+++ b/bin/config-dist.yaml
@@ -199,10 +199,6 @@ HostMetrics:
 #  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString


-Config:
-#  DisplayMode: TWOCOLOR # uncomment to force BaseUI
-#  DisplayMode: COLOR # uncomment to force MUI
-
 General:
  MaxNodes: 200
  MaxMessageQueue: 100
--- a/bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml
+++ b/bin/config.d/lora-ws-raspberry-pico-to-orangepi-03.yaml
@@ -1,52 +0,0 @@
-# https://www.waveshare.com/pico-lora-sx1262-868m.htm
-# http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
-#
-# See Orange Pi Zero3 manual, chapter 3.16, page 124 for 26-pin header pinout
-#
-# Pin Connection
-# Waveshare       Orange Pi Zero3
-#   36    3.3V        17
-#   15    MOSI        19
-#   16    MISO        21  
-#   14    CLK         23
-#   38    GND         25
-#   4     BUSY        18
-#   20    RESET       22
-#   5     CS          24
-#   26    DIO1/IRQ    26
-
-Lora:
-  Module: sx1262  # Waveshare Raspberry Pico Lora module
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  # Specify either the spidev1_1 or the CS below, not both!
-  # On DietPi Linux, when using the user overlay dietpi-spi1_1.dtbo, CS will be configured with spidev1.1
-  spidev: spidev1.1 # See Orange Pi Zero3 manual, chapter 3.18.3, page 130
-#  CS:             # CS     PIN_24 -> chip 1, line 233
-#    pin: 24
-#    gpiochip: 1
-#    line: 233
-  SCK:            # SCK     PIN_23 -> chip 1, line 230
-    pin: 23
-    gpiochip: 1
-    line: 230
-  Busy:           # BUSY    PIN_18 -> chip 1, line 78
-    pin: 18
-    gpiochip: 1
-    line: 78
-  MOSI:           # MOSI    PIN_19 -> chip 1, line 231
-    pin: 19
-    gpiochip: 1
-    line: 231
-  MISO:           # MISO    PIN_21 -> chip 1, line 232
-    pin: 21
-    gpiochip: 1
-    line: 232
-  Reset:          # NRST    PIN_22 -> chip 1, line 71
-    pin: 22
-    gpiochip: 1
-    line: 71
-  IRQ:            # DIO1    PIN_26 -> chip 1, line 74
-    pin: 26
-    gpiochip: 1
-    line: 74
--- a/bin/device-install.sh
+++ b/bin/device-install.sh
@@ -7,7 +7,12 @@ MCU=""

 # Variant groups
 BIGDB_8MB=(
-	"picomputer-s3"
+	# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+if [[ $FILENAME == *"-tft-"* ]]; then
+    TFT_BUILD=true
+fi
+
+# Extract BASENAME from %FILENAME% for later use.r-s3"
 	"unphone"
 	"seeed-sensecap-indicator"
 	"crowpanel-esp32s3"
--- a/bin/device-update.sh
+++ b/bin/device-update.sh
@@ -31,16 +31,17 @@ EOF
 }

 # Check for --change-mode and remove it from arguments
-NEW_ARGS=()
+NEW_ARGS=""
 for arg in "$@"; do
    if [ "$arg" = "--change-mode" ]; then
        CHANGE_MODE=true
    else
-        NEW_ARGS+=("$arg")
+        NEW_ARGS="$NEW_ARGS \"\$arg\""
    fi
 done

-set -- "${NEW_ARGS[@]}"
+# Reset positional parameters to filtered list
+eval set -- $NEW_ARGS

 while getopts ":hp:P:f:" opt; do
    case "${opt}" in
--- a/bin/org.meshtastic.meshtasticd.metainfo.xml
+++ b/bin/org.meshtastic.meshtasticd.metainfo.xml
@@ -87,9 +87,6 @@
  </screenshots>

  <releases>
-    <release version="2.7.3" date="2025-07-10">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.3</url>
-    </release>
    <release version="2.7.2" date="2025-07-04">
      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.2</url>
    </release>
--- a/boards/ThinkNode-M1.json
+++ b/boards/ThinkNode-M1.json
@@ -10,7 +10,8 @@
    "hwids": [
      ["0x239A", "0x4405"],
      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x00DA"]
    ],
    "usb_product": "elecrow_eink",
    "mcu": "nrf52840",
--- a/boards/heltec_mesh_node_t114.json
+++ b/boards/heltec_mesh_node_t114.json
@@ -10,8 +10,7 @@
    "hwids": [
      ["0x239A", "0x4405"],
      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x2886", "0x1667"]
+      ["0x239A", "0x002A"]
    ],
    "usb_product": "HT-n5262",
    "mcu": "nrf52840",
--- a/boards/tracker-t1000-e.json
+++ b/boards/tracker-t1000-e.json
@@ -11,8 +11,7 @@
      ["0x239A", "0x8029"],
      ["0x239A", "0x0029"],
      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"],
-      ["0x2886", "0x0057"]
+      ["0x239A", "0x802A"]
    ],
    "usb_product": "T1000-E-BOOT",
    "mcu": "nrf52840",
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,4 +1,4 @@
-meshtasticd (2.7.3.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.2.0) UNRELEASED; urgency=medium

  [ Austin Lane ]
  * Initial packaging
@@ -28,7 +28,4 @@ meshtasticd (2.7.3.0) UNRELEASED; urgency=medium
  [  ]
  * GitHub Actions Automatic version bump

-  [ Ubuntu ]
-  * GitHub Actions Automatic version bump
-
- -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 10 Jul 2025 16:29:27 +0000
+ --  <github-actions[bot]@users.noreply.github.com>  Fri, 04 Jul 2025 11:58:01 +0000
--- a/platformio.ini
+++ b/platformio.ini
@@ -26,7 +26,6 @@ build_flags = -Wno-missing-field-initializers
 	-DUSE_THREAD_NAMES
 	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
 	-DPB_ENABLE_MALLOC=1
-	-DRADIOLIB_LOW_LEVEL=1
 	-DRADIOLIB_EXCLUDE_CC1101=1
 	-DRADIOLIB_EXCLUDE_NRF24=1
 	-DRADIOLIB_EXCLUDE_RF69=1
@@ -105,18 +104,18 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	jgromes/RadioLib@7.2.1
+	jgromes/RadioLib@7.2.0

 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/86a09a7360f92d10053fbbf8d74f67f85b0ceb09.zip
+	https://github.com/meshtastic/device-ui/archive/4b7bf369adfa5a7bd419fa8293d21206576d52d0.zip

 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
-	adafruit/Adafruit BusIO@1.17.2
+	adafruit/Adafruit BusIO@1.17.1
 	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
 	adafruit/Adafruit Unified Sensor@1.1.15
 	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
@@ -130,7 +129,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
 	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
-	adafruit/Adafruit INA260 Library@1.5.3
+	adafruit/Adafruit INA260 Library@1.5.2
 	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
 	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
--- a/src/gps/GPS.cpp
+++ b/src/gps/GPS.cpp
@@ -1536,10 +1536,7 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
        if (t.tm_mon > -1) {
            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
                      t.tm_sec, ti.age());
-            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultInvalidTime) {
-                // Clear the GPS buffer if we got an invalid time
-                clearBuffer();
-            }
+            perhapsSetRTC(RTCQualityGPS, t);
            return true;
        } else
            return false;
--- a/src/gps/RTC.cpp
+++ b/src/gps/RTC.cpp
@@ -105,7 +105,7 @@ void readFromRTC()
 *
 * If we haven't yet set our RTC this boot, set it from a GPS derived time
 */
-RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
+bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 {
    static uint32_t lastSetMsec = 0;
    uint32_t now = millis();
@@ -113,7 +113,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
 #ifdef BUILD_EPOCH
    if (tv->tv_sec < BUILD_EPOCH) {
        LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
-        return RTCSetResultInvalidTime;
+        return false;
    }
 #endif

@@ -184,9 +184,9 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
        readFromRTC();
 #endif

-        return RTCSetResultSuccess;
+        return true;
    } else {
-        return RTCSetResultNotSet; // RTC was already set with a higher quality time
+        return false;
    }
 }

@@ -215,7 +215,7 @@ const char *RtcName(RTCQuality quality)
 * @param t The time to potentially set the RTC to.
 * @return True if the RTC was set to the provided time, false otherwise.
 */
-RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
+bool perhapsSetRTC(RTCQuality q, struct tm &t)
 {
    /* Convert to unix time
    The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, 1970
@@ -231,7 +231,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
    // LOG_DEBUG("Got time from GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
    if (t.tm_year < 0 || t.tm_year >= 300) {
        // LOG_DEBUG("Ignore invalid GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec);
-        return RTCSetResultInvalidTime;
+        return false;
    } else {
        return perhapsSetRTC(q, &tv);
    }
--- a/src/gps/RTC.h
+++ b/src/gps/RTC.h
@@ -22,22 +22,13 @@ enum RTCQuality {
    RTCQualityGPS = 4
 };

-/// The RTC set result codes
-/// Used to indicate the result of an attempt to set the RTC.
-enum RTCSetResult {
-    RTCSetResultNotSet = 0,      ///< RTC was set successfully
-    RTCSetResultSuccess = 1,     ///< RTC was set successfully
-    RTCSetResultInvalidTime = 3, ///< The provided time was invalid (e.g., before the build epoch)
-    RTCSetResultError = 4        ///< An error occurred while setting the RTC
-};
-
 RTCQuality getRTCQuality();

 extern uint32_t lastSetFromPhoneNtpOrGps;

 /// If we haven't yet set our RTC this boot, set it from a GPS derived time
-RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
-RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t);
+bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
+bool perhapsSetRTC(RTCQuality q, struct tm &t);

 /// Return a string name for the quality
 const char *RtcName(RTCQuality quality);
--- a/src/graphics/EInkDisplay2.cpp
+++ b/src/graphics/EInkDisplay2.cpp
@@ -6,10 +6,6 @@
 #include "main.h"
 #include <SPI.h>

-#ifdef GXEPD2_DRIVER_0
-#include "einkDetect.h"
-#endif
-
 /*
    The macros EINK_DISPLAY_MODEL, EINK_WIDTH, and EINK_HEIGHT are defined as build_flags in a variant's platformio.ini
    Previously, these macros were defined at the top of this file.
@@ -178,8 +174,9 @@ bool EInkDisplay::connect()
        }
    }

-#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) ||                 \
-    defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
+#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213) ||             \
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER) || defined(CROWPANEL_ESP32S3_5_EPAPER) ||                   \
+    defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER)
    {
        // Start HSPI
        hspi = new SPIClass(HSPI);
@@ -235,23 +232,6 @@ bool EInkDisplay::connect()
        adafruitDisplay->init();
        adafruitDisplay->setRotation(3);
    }
-#elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
-
-    // Detect display model, before starting SPI
-    EInkDetectionResult displayModel = detectEInk();
-
-    // Start HSPI
-    hspi = new SPIClass(HSPI);
-    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
-
-    // Create GxEPD2 object
-    adafruitDisplay = new GxEPD2_Multi<GXEPD2_DRIVER_0, GXEPD2_DRIVER_1>((uint8_t)displayModel, PIN_EINK_CS, PIN_EINK_DC,
-                                                                         PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
-
-    // Init GxEPD2
-    adafruitDisplay->init();
-    adafruitDisplay->setRotation(3);
-
 #endif

    return true;
--- a/src/graphics/EInkDisplay2.h
+++ b/src/graphics/EInkDisplay2.h
@@ -5,10 +5,6 @@
 #include "GxEPD2_BW.h"
 #include <OLEDDisplay.h>

-#ifdef GXEPD2_DRIVER_0 // If variant has multiple possible display models
-#include "GxEPD2Multi.h"
-#endif
-
 /**
 * An adapter class that allows using the GxEPD2 library as if it was an OLEDDisplay implementation.
 *
@@ -67,15 +63,8 @@ class EInkDisplay : public OLEDDisplay
    // Connect to the display
    virtual bool connect() override;

-#ifdef GXEPD2_DRIVER_0
-    // AdafruitGFX display object - wrapper for multiple drivers
-    // Allows runtime detection of multiple displays
-    // Avoid this situation if possible!
-    GxEPD2_Multi<GXEPD2_DRIVER_0, GXEPD2_DRIVER_1> *adafruitDisplay = NULL;
-#else
-    // AdafruitGFX display object (for single display model) - instantiated in connect(), variant specific
+    // AdafruitGFX display object - instantiated in connect(), variant specific
    GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT> *adafruitDisplay = NULL;
-#endif

    // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
--- a/src/graphics/GxEPD2Multi.h
+++ b/src/graphics/GxEPD2Multi.h
@@ -1,135 +0,0 @@
-// Wrapper class for GxEPD2_BW
-
-// Generic signature at build-time, so that we can detect display model at run-time
-// Workaround for issue of GxEPD2_BW objects not having a shared base class
-// Only exposes methods which we are actually using
-
-template <typename Driver0, typename Driver1> class GxEPD2_Multi
-{
-  public:
-    void drawPixel(int16_t x, int16_t y, uint16_t color)
-    {
-        if (which == 0)
-            driver0->drawPixel(x, y, color);
-        else
-            driver1->drawPixel(x, y, color);
-    }
-
-    bool nextPage()
-    {
-        if (which == 0)
-            return driver0->nextPage();
-        else
-            return driver1->nextPage();
-    }
-
-    void hibernate()
-    {
-        if (which == 0)
-            driver0->hibernate();
-        else
-            driver1->hibernate();
-    }
-
-    void init(uint32_t serial_diag_bitrate = 0)
-    {
-        if (which == 0)
-            driver0->init(serial_diag_bitrate);
-        else
-            driver1->init(serial_diag_bitrate);
-    }
-
-    void init(uint32_t serial_diag_bitrate, bool initial, uint16_t reset_duration = 20, bool pulldown_rst_mode = false)
-    {
-        if (which == 0)
-            driver0->init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
-        else
-            driver1->init(serial_diag_bitrate, initial, reset_duration, pulldown_rst_mode);
-    }
-
-    void setRotation(uint8_t x)
-    {
-        if (which == 0)
-            driver0->setRotation(x);
-        else
-            driver1->setRotation(x);
-    }
-
-    void setPartialWindow(uint16_t x, uint16_t y, uint16_t w, uint16_t h)
-    {
-        if (which == 0)
-            driver0->setPartialWindow(x, y, w, h);
-        else
-            driver1->setPartialWindow(x, y, w, h);
-    }
-
-    void setFullWindow()
-    {
-        if (which == 0)
-            driver0->setFullWindow();
-        else
-            driver1->setFullWindow();
-    }
-
-    int16_t width()
-    {
-        if (which == 0)
-            return driver0->width();
-        else
-            return driver1->width();
-    }
-
-    int16_t height()
-    {
-        if (which == 0)
-            return driver0->height();
-        else
-            return driver1->height();
-    }
-
-    void clearScreen(uint8_t value = 0xFF)
-    {
-        if (which == 0)
-            driver0->clearScreen();
-        else
-            driver1->clearScreen();
-    }
-
-    void endAsyncFull()
-    {
-        if (which == 0)
-            driver0->endAsyncFull();
-        else
-            driver1->endAsyncFull();
-    }
-
-    // Exposes methods of the GxEPD2_EPD object which is usually available as GxEPD2_BW::epd
-    class Epd2Wrapper
-    {
-      public:
-        bool isBusy() { return m_epd2->isBusy(); }
-        GxEPD2_EPD *m_epd2;
-    } epd2;
-
-    // Constructor
-    // Select driver by passing whichDriver as 0 or 1
-    GxEPD2_Multi(uint8_t whichDriver, int16_t cs, int16_t dc, int16_t rst, int16_t busy, SPIClass &spi)
-    {
-        assert(whichDriver == 0 || whichDriver == 1);
-        which = whichDriver;
-        LOG_DEBUG("GxEPD2_Multi driver: %d", which);
-
-        if (which == 0) {
-            driver0 = new GxEPD2_BW<Driver0, Driver0::HEIGHT>(Driver0(cs, dc, rst, busy, spi));
-            epd2.m_epd2 = &(driver0->epd2);
-        } else if (which == 1) {
-            driver1 = new GxEPD2_BW<Driver1, Driver1::HEIGHT>(Driver1(cs, dc, rst, busy, spi));
-            epd2.m_epd2 = &(driver1->epd2);
-        }
-    }
-
-  private:
-    uint8_t which;
-    GxEPD2_BW<Driver0, Driver0::HEIGHT> *driver0;
-    GxEPD2_BW<Driver1, Driver1::HEIGHT> *driver1;
-};
--- a/src/graphics/Screen.cpp
+++ b/src/graphics/Screen.cpp
@@ -21,7 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 */
 #include "Screen.h"
-#include "NodeDB.h"
 #include "PowerMon.h"
 #include "Throttle.h"
 #include "configuration.h"
@@ -45,6 +44,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #include "FSCommon.h"
 #include "MeshService.h"
+#include "NodeDB.h"
 #include "RadioLibInterface.h"
 #include "error.h"
 #include "gps/GeoCoord.h"
@@ -171,7 +171,7 @@ void Screen::showOverlayBanner(BannerOverlayOptions banner_overlay_options)
 }

 // Called to trigger a banner with custom message and duration
-void Screen::showNodePicker(const char *message, uint32_t durationMs, std::function<void(uint32_t)> bannerCallback)
+void Screen::showNodePicker(const char *message, uint32_t durationMs, std::function<void(int)> bannerCallback)
 {
 #ifdef USE_EINK
    EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Skip full refresh for all overlay menus
@@ -196,6 +196,7 @@ void Screen::showNodePicker(const char *message, uint32_t durationMs, std::funct
 void Screen::showNumberPicker(const char *message, uint32_t durationMs, uint8_t digits,
                              std::function<void(uint32_t)> bannerCallback)
 {
+    LOG_WARN("Show Number Picker");
 #ifdef USE_EINK
    EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // Skip full refresh for all overlay menus
 #endif
@@ -293,13 +294,13 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
    LOG_INFO("Protobuf Value uiconfig.screen_rgb_color: %d", uiconfig.screen_rgb_color);
    int32_t rawRGB = uiconfig.screen_rgb_color;
    if (rawRGB > 0 && rawRGB <= 255255255) {
-        uint8_t TFT_MESH_r = (rawRGB >> 16) & 0xFF;
-        uint8_t TFT_MESH_g = (rawRGB >> 8) & 0xFF;
-        uint8_t TFT_MESH_b = rawRGB & 0xFF;
-        LOG_INFO("Values of r,g,b: %d, %d, %d", TFT_MESH_r, TFT_MESH_g, TFT_MESH_b);
+        uint8_t r = (rawRGB >> 16) & 0xFF;
+        uint8_t g = (rawRGB >> 8) & 0xFF;
+        uint8_t b = rawRGB & 0xFF;
+        LOG_INFO("Values of r,g,b: %d, %d, %d", r, g, b);

-        if (TFT_MESH_r <= 255 && TFT_MESH_g <= 255 && TFT_MESH_b <= 255) {
-            TFT_MESH = COLOR565(TFT_MESH_r, TFT_MESH_g, TFT_MESH_b);
+        if (r <= 255 && g <= 255 && b <= 255) {
+            TFT_MESH = COLOR565(r, g, b);
        }
    }

@@ -312,8 +313,8 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
                            ST7789_MISO, ST7789_SCK);
 #else
    dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
-#endif
    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
+#endif
 #elif defined(USE_SSD1306)
    dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -640,11 +641,6 @@ void Screen::forceDisplay(bool forceUiUpdate)

    // Tell EInk class to update the display
    static_cast<EInkDisplay *>(dispdev)->forceDisplay();
-#else
-    // No delay between UI frame rendering
-    if (forceUiUpdate) {
-        setFastFramerate();
-    }
 #endif
 }

@@ -948,6 +944,22 @@ void Screen::setFrames(FrameFocus focus)
    indicatorIcons.push_back(digital_icon_clock);
 #endif

+    // We don't show the node info of our node (if we have it yet - we should)
+    size_t numMeshNodes = nodeDB->getNumMeshNodes();
+    if (numMeshNodes > 0)
+        numMeshNodes--;
+
+    for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
+        const meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
+        if (n && n->num != nodeDB->getNodeNum() && n->is_favorite) {
+            if (fsi.positions.firstFavorite == 255)
+                fsi.positions.firstFavorite = numframes;
+            fsi.positions.lastFavorite = numframes;
+            normalFrames[numframes++] = graphics::UIRenderer::drawNodeInfo;
+            indicatorIcons.push_back(icon_node);
+        }
+    }
+
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
    if (!dismissedFrames.wifi && isWifiAvailable()) {
        fsi.positions.wifi = numframes;
@@ -957,7 +969,7 @@ void Screen::setFrames(FrameFocus focus)
 #endif

    // Beware of what changes you make in this code!
-    // We pass numframes into GetMeshModulesWithUIFrames() which is highly important!
+    // We pass numfames into GetMeshModulesWithUIFrames() which is highly important!
    // Inside of that callback, goes over to MeshModule.cpp and we run
    // modulesWithUIFrames.resize(startIndex, nullptr), to insert nullptr
    // entries until we're ready to start building the matching entries.
@@ -986,34 +998,6 @@ void Screen::setFrames(FrameFocus focus)

    LOG_DEBUG("Added modules.  numframes: %d", numframes);

-    // We don't show the node info of our node (if we have it yet - we should)
-    size_t numMeshNodes = nodeDB->getNumMeshNodes();
-    if (numMeshNodes > 0)
-        numMeshNodes--;
-
-    // Temporary array to hold favorite node frames
-    std::vector<FrameCallback> favoriteFrames;
-
-    for (size_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
-        const meshtastic_NodeInfoLite *n = nodeDB->getMeshNodeByIndex(i);
-        if (n && n->num != nodeDB->getNodeNum() && n->is_favorite) {
-            favoriteFrames.push_back(graphics::UIRenderer::drawNodeInfo);
-        }
-    }
-
-    // Insert favorite frames *after* collecting them all
-    if (!favoriteFrames.empty()) {
-        fsi.positions.firstFavorite = numframes;
-        for (auto &f : favoriteFrames) {
-            normalFrames[numframes++] = f;
-            indicatorIcons.push_back(icon_node);
-        }
-        fsi.positions.lastFavorite = numframes - 1;
-    } else {
-        fsi.positions.firstFavorite = 255;
-        fsi.positions.lastFavorite = 255;
-    }
-
    fsi.frameCount = numframes;   // Total framecount is used to apply FOCUS_PRESERVE
    this->frameCount = numframes; // ✅ Save frame count for use in custom overlay
    LOG_DEBUG("Finished build frames. numframes: %d", numframes);
@@ -1025,7 +1009,8 @@ void Screen::setFrames(FrameFocus focus)
    static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
    ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));

-    prevFrame = -1; // Force drawNodeInfo to pick a new node (because our list just changed)
+    prevFrame = -1; // Force drawNodeInfo to pick a new node (because our list
+                    // just changed)

    // Focus on a specific frame, in the frame set we just created
    switch (focus) {
@@ -1262,45 +1247,40 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
            devicestate.has_rx_text_message = true; // Needed to include the message frame
            hasUnreadMessage = true;                // Enables mail icon in the header
            setFrames(FOCUS_PRESERVE);              // Refresh frame list without switching view
+            forceDisplay();                         // Forces screen redraw

-            // Only wake/force display if the configuration allows it
-            if (shouldWakeOnReceivedMessage()) {
-                setOn(true);    // Wake up the screen first
-                forceDisplay(); // Forces screen redraw
+            // === Prepare banner content ===
+            const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
+            const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;

-                // === Prepare banner content ===
-                const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
-                const char *longName = (node && node->has_user) ? node->user.long_name : nullptr;
+            const char *msgRaw = reinterpret_cast<const char *>(packet->decoded.payload.bytes);

-                const char *msgRaw = reinterpret_cast<const char *>(packet->decoded.payload.bytes);
+            char banner[256];

-                char banner[256];
-
-                // Check for bell character in message to determine alert type
-                bool isAlert = false;
-                for (size_t i = 0; i < packet->decoded.payload.size && i < 100; i++) {
-                    if (msgRaw[i] == '\x07') {
-                        isAlert = true;
-                        break;
-                    }
+            // Check for bell character in message to determine alert type
+            bool isAlert = false;
+            for (size_t i = 0; i < packet->decoded.payload.size && i < 100; i++) {
+                if (msgRaw[i] == '\x07') {
+                    isAlert = true;
+                    break;
                }
-
-                if (isAlert) {
-                    if (longName && longName[0]) {
-                        snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
-                    } else {
-                        strcpy(banner, "Alert Received");
-                    }
-                } else {
-                    if (longName && longName[0]) {
-                        snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
-                    } else {
-                        strcpy(banner, "New Message");
-                    }
-                }
-
-                screen->showSimpleBanner(banner, 3000);
            }
+
+            if (isAlert) {
+                if (longName && longName[0]) {
+                    snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
+                } else {
+                    strcpy(banner, "Alert Received");
+                }
+            } else {
+                if (longName && longName[0]) {
+                    snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
+                } else {
+                    strcpy(banner, "New Message");
+                }
+            }
+
+            screen->showSimpleBanner(banner, 3000);
        }
    }

@@ -1339,7 +1319,7 @@ int Screen::handleInputEvent(const InputEvent *event)
    setFastFramerate();                       // Draw ASAP
 #endif
    if (NotificationRenderer::isOverlayBannerShowing()) {
-        NotificationRenderer::inEvent = *event;
+        NotificationRenderer::inEvent = event->inputEvent;
        static OverlayCallback overlays[] = {graphics::UIRenderer::drawNavigationBar, NotificationRenderer::drawBannercallback};
        ui->setOverlays(overlays, sizeof(overlays) / sizeof(overlays[0]));
        setFastFramerate(); // Draw ASAP
@@ -1433,23 +1413,3 @@ bool Screen::isOverlayBannerShowing()
 #else
 graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}
 #endif // HAS_SCREEN
-
-bool shouldWakeOnReceivedMessage()
-{
-    /*
-    The goal here is to determine when we do NOT wake up the screen on message received:
-    - Any ext. notifications are turned on
-    - If role is not client / client_mute
-    - If the battery level is very low
-    */
-    if (moduleConfig.external_notification.enabled) {
-        return false;
-    }
-    if (!meshtastic_Config_DeviceConfig_Role_CLIENT && !meshtastic_Config_DeviceConfig_Role_CLIENT_MUTE) {
-        return false;
-    }
-    if (powerStatus && powerStatus->getBatteryChargePercent() < 10) {
-        return false;
-    }
-    return true;
-}
--- a/src/graphics/Screen.h
+++ b/src/graphics/Screen.h
@@ -26,8 +26,6 @@ struct BannerOverlayOptions {
 };
 } // namespace graphics

-bool shouldWakeOnReceivedMessage();
-
 #if !HAS_SCREEN
 #include "power.h"
 namespace graphics
@@ -94,7 +92,6 @@ class Screen
 #include "commands.h"
 #include "concurrency/LockGuard.h"
 #include "concurrency/OSThread.h"
-#include "graphics/draw/MenuHandler.h"
 #include "input/InputBroker.h"
 #include "mesh/MeshModule.h"
 #include "modules/AdminModule.h"
@@ -311,15 +308,9 @@ class Screen : public concurrency::OSThread
    void showSimpleBanner(const char *message, uint32_t durationMs = 0);
    void showOverlayBanner(BannerOverlayOptions);

-    void showNodePicker(const char *message, uint32_t durationMs, std::function<void(uint32_t)> bannerCallback);
+    void showNodePicker(const char *message, uint32_t durationMs, std::function<void(int)> bannerCallback);
    void showNumberPicker(const char *message, uint32_t durationMs, uint8_t digits, std::function<void(uint32_t)> bannerCallback);

-    void requestMenu(graphics::menuHandler::screenMenus menuToShow)
-    {
-        graphics::menuHandler::menuQueue = menuToShow;
-        runNow();
-    }
-
    void startFirmwareUpdateScreen()
    {
        ScreenCmd cmd;
--- a/src/graphics/draw/MenuHandler.cpp
+++ b/src/graphics/draw/MenuHandler.cpp
@@ -13,7 +13,6 @@
 #include "main.h"
 #include "modules/AdminModule.h"
 #include "modules/CannedMessageModule.h"
-#include "modules/KeyVerificationModule.h"

 extern uint16_t TFT_MESH;

@@ -129,15 +128,14 @@ void menuHandler::ClockFacePicker()
            screen->runNow();
        } else if (selected == Digital) {
            uiconfig.is_clockface_analog = false;
-            saveUIConfig();
+            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
            screen->setFrames(Screen::FOCUS_CLOCK);
        } else {
            uiconfig.is_clockface_analog = true;
-            saveUIConfig();
+            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
            screen->setFrames(Screen::FOCUS_CLOCK);
        }
    };
-    bannerOptions.InitialSelected = uiconfig.is_clockface_analog ? 2 : 1;
    screen->showOverlayBanner(bannerOptions);
 }

@@ -238,25 +236,27 @@ void menuHandler::clockMenu()

 void menuHandler::messageResponseMenu()
 {
-    enum optionsNumbers { Back = 0, Dismiss = 1, Preset = 2, Freetext = 3, Aloud = 4, enumEnd = 5 };
-
-    static const char *optionsArray[enumEnd] = {"Back", "Dismiss", "Reply via Preset"};
-    static int optionsEnumArray[enumEnd] = {Back, Dismiss, Preset};
-    int options = 3;

+    static const char **optionsArrayPtr;
+    int options;
+    enum optionsNumbers { Back = 0, Dismiss = 1, Preset = 2, Freetext = 3 };
    if (kb_found) {
-        optionsArray[options] = "Reply via Freetext";
-        optionsEnumArray[options++] = Freetext;
+        static const char *optionsArray[] = {"Back", "Dismiss", "Reply via Preset", "Reply via Freetext"};
+        optionsArrayPtr = optionsArray;
+        options = 4;
+    } else {
+        static const char *optionsArray[] = {"Back", "Dismiss", "Reply via Preset"};
+        optionsArrayPtr = optionsArray;
+        options = 3;
    }
-
 #ifdef HAS_I2S
-    optionsArray[options] = "Read Aloud";
-    optionsEnumArray[options++] = Aloud;
+    static const char *optionsArray[] = {"Back", "Dismiss", "Reply via Preset", "Reply via Freetext", "Read Aloud"};
+    optionsArrayPtr = optionsArray;
+    options = 5;
 #endif
    BannerOverlayOptions bannerOptions;
    bannerOptions.message = "Message Action";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsArrayPtr = optionsArrayPtr;
    bannerOptions.optionsCount = options;
    bannerOptions.bannerCallback = [](int selected) -> void {
        if (selected == Dismiss) {
@@ -275,7 +275,7 @@ void menuHandler::messageResponseMenu()
            }
        }
 #ifdef HAS_I2S
-        else if (selected == Aloud) {
+        else if (selected == 4) {
            const meshtastic_MeshPacket &mp = devicestate.rx_text_message;
            const char *msg = reinterpret_cast<const char *>(mp.decoded.payload.bytes);

@@ -288,10 +288,10 @@ void menuHandler::messageResponseMenu()

 void menuHandler::homeBaseMenu()
 {
-    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Bluetooth, Sleep, enumEnd };
+    enum optionsNumbers { Back, Backlight, Position, Preset, Freetext, Bluetooth, Sleep };

-    static const char *optionsArray[enumEnd] = {"Back"};
-    static int optionsEnumArray[enumEnd] = {Back};
+    static const char *optionsArray[6] = {"Back"};
+    static int optionsEnumArray[6] = {Back};
    int options = 1;

 #ifdef PIN_EINK_EN
@@ -337,8 +337,8 @@ void menuHandler::homeBaseMenu()
        } else if (selected == Freetext) {
            cannedMessageModule->LaunchFreetextWithDestination(NODENUM_BROADCAST);
        } else if (selected == Bluetooth) {
-            menuQueue = bluetooth_toggle_menu;
-            screen->runNow();
+            InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
+            inputBroker->injectInputEvent(&event);
        }
    };
    screen->showOverlayBanner(bannerOptions);
@@ -346,28 +346,37 @@ void menuHandler::homeBaseMenu()

 void menuHandler::systemBaseMenu()
 {
+
    // Check if brightness is supported
    bool hasSupportBrightness = false;
 #if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
    hasSupportBrightness = true;
 #endif

-    enum optionsNumbers { Back, Notifications, ScreenOptions, PowerMenu, Test, enumEnd };
-    static const char *optionsArray[enumEnd] = {"Back"};
-    static int optionsEnumArray[enumEnd] = {Back};
+    enum optionsNumbers { Back, Beeps, Brightness, Reboot, Color, MUI, Test };
+    static const char *optionsArray[7] = {"Back"};
+    static int optionsEnumArray[7] = {Back};
    int options = 1;

-    optionsArray[options] = "Notifications";
-    optionsEnumArray[options++] = Notifications;
-#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) ||             \
-    defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
-    optionsArray[options] = "Screen Options";
-    optionsEnumArray[options++] = ScreenOptions;
+    optionsArray[options] = "Beeps Action";
+    optionsEnumArray[options++] = Beeps;
+
+    if (hasSupportBrightness) {
+        optionsArray[options] = "Brightness";
+        optionsEnumArray[options++] = Brightness;
+    }
+
+    optionsArray[options] = "Reboot";
+    optionsEnumArray[options++] = Reboot;
+
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
+    optionsArray[options] = "Screen Color";
+    optionsEnumArray[options++] = Color;
+#endif
+#if HAS_TFT
+    optionsArray[options] = "Switch to MUI";
+    optionsEnumArray[options++] = MUI;
 #endif
-
-    optionsArray[options] = "Reboot/Shutdown";
-    optionsEnumArray[options++] = PowerMenu;
-
    if (test_enabled) {
        optionsArray[options] = "Test Menu";
        optionsEnumArray[options++] = Test;
@@ -379,14 +388,20 @@ void menuHandler::systemBaseMenu()
    bannerOptions.optionsCount = options;
    bannerOptions.optionsEnumPtr = optionsEnumArray;
    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Notifications) {
-            menuHandler::menuQueue = menuHandler::notifications_menu;
+        if (selected == Beeps) {
+            menuHandler::menuQueue = menuHandler::buzzermodemenupicker;
            screen->runNow();
-        } else if (selected == ScreenOptions) {
-            menuHandler::menuQueue = menuHandler::screen_options_menu;
+        } else if (selected == Brightness) {
+            menuHandler::menuQueue = menuHandler::brightness_picker;
            screen->runNow();
-        } else if (selected == PowerMenu) {
-            menuHandler::menuQueue = menuHandler::power_menu;
+        } else if (selected == Reboot) {
+            menuHandler::menuQueue = menuHandler::reboot_menu;
+            screen->runNow();
+        } else if (selected == MUI) {
+            menuHandler::menuQueue = menuHandler::mui_picker;
+            screen->runNow();
+        } else if (selected == Color) {
+            menuHandler::menuQueue = menuHandler::tftcolormenupicker;
            screen->runNow();
        } else if (selected == Test) {
            menuHandler::menuQueue = menuHandler::test_menu;
@@ -403,22 +418,21 @@ void menuHandler::systemBaseMenu()

 void menuHandler::favoriteBaseMenu()
 {
-    enum optionsNumbers { Back, Preset, Freetext, Remove, enumEnd };
-    static const char *optionsArray[enumEnd] = {"Back", "New Preset Msg"};
-    static int optionsEnumArray[enumEnd] = {Back, Preset};
-    int options = 2;
+    int options;
+    static const char **optionsArrayPtr;

    if (kb_found) {
-        optionsArray[options] = "New Freetext Msg";
-        optionsEnumArray[options++] = Freetext;
+        static const char *optionsArray[] = {"Back", "New Preset Msg", "New Freetext Msg", "Remove Favorite"};
+        optionsArrayPtr = optionsArray;
+        options = 4;
+    } else {
+        static const char *optionsArray[] = {"Back", "New Preset Msg", "Remove Favorite"};
+        optionsArrayPtr = optionsArray;
+        options = 3;
    }
-    optionsArray[options] = "Remove Favorite";
-    optionsEnumArray[options++] = Remove;
-
    BannerOverlayOptions bannerOptions;
    bannerOptions.message = "Favorites Action";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsArrayPtr = optionsArrayPtr;
    bannerOptions.optionsCount = options;
    bannerOptions.bannerCallback = [](int selected) -> void {
        if (selected == 1) {
@@ -435,29 +449,34 @@ void menuHandler::favoriteBaseMenu()

 void menuHandler::positionBaseMenu()
 {
-    enum optionsNumbers { Back, GPSToggle, CompassMenu, CompassCalibrate, enumEnd };
-
-    static const char *optionsArray[enumEnd] = {"Back", "GPS Toggle", "Compass"};
-    static int optionsEnumArray[enumEnd] = {Back, GPSToggle, CompassMenu};
-    int options = 3;
+    int options;
+    static const char **optionsArrayPtr;
+    static const char *optionsArray[] = {"Back", "GPS Toggle", "Compass"};
+    static const char *optionsArrayCalibrate[] = {"Back", "GPS Toggle", "Compass", "Compass Calibrate"};

    if (accelerometerThread) {
-        optionsArray[options] = "Compass Calibrate";
-        optionsEnumArray[options++] = CompassCalibrate;
+        optionsArrayPtr = optionsArrayCalibrate;
+        options = 4;
+    } else {
+        optionsArrayPtr = optionsArray;
+        options = 3;
    }
    BannerOverlayOptions bannerOptions;
    bannerOptions.message = "Position Action";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
+    bannerOptions.optionsArrayPtr = optionsArrayPtr;
    bannerOptions.optionsCount = options;
    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == GPSToggle) {
+        if (selected == 1) {
+#if MESHTASTIC_EXCLUDE_GPS
+            menuQueue = menu_none;
+#else
            menuQueue = gps_toggle_menu;
            screen->runNow();
-        } else if (selected == CompassMenu) {
+#endif
+        } else if (selected == 2) {
            menuQueue = compass_point_north_menu;
            screen->runNow();
-        } else if (selected == CompassCalibrate) {
+        } else if (selected == 3) {
            accelerometerThread->calibrate(30);
        }
    };
@@ -466,20 +485,16 @@ void menuHandler::positionBaseMenu()

 void menuHandler::nodeListMenu()
 {
-    enum optionsNumbers { Back, Favorite, Verify, Reset };
-    static const char *optionsArray[] = {"Back", "Add Favorite", "Key Verification", "Reset NodeDB"};
+    static const char *optionsArray[] = {"Back", "Add Favorite", "Reset NodeDB"};
    BannerOverlayOptions bannerOptions;
    bannerOptions.message = "Node Action";
    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 4;
+    bannerOptions.optionsCount = 3;
    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Favorite) {
+        if (selected == 1) {
            menuQueue = add_favorite;
            screen->runNow();
-        } else if (selected == Verify) {
-            menuQueue = key_verification_init;
-            screen->runNow();
-        } else if (selected == Reset) {
+        } else if (selected == 2) {
            menuQueue = reset_node_db_menu;
            screen->runNow();
        }
@@ -507,7 +522,6 @@ void menuHandler::resetNodeDBMenu()

 void menuHandler::compassNorthMenu()
 {
-    enum optionsNumbers { Back, Dynamic, Fixed, Freeze };
    static const char *optionsArray[] = {"Back", "Dynamic", "Fixed Ring", "Freeze Heading"};
    BannerOverlayOptions bannerOptions;
    bannerOptions.message = "North Directions?";
@@ -515,25 +529,28 @@ void menuHandler::compassNorthMenu()
    bannerOptions.optionsCount = 4;
    bannerOptions.InitialSelected = uiconfig.compass_mode + 1;
    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Dynamic) {
+        if (selected == 1) {
            if (uiconfig.compass_mode != meshtastic_CompassMode_DYNAMIC) {
                uiconfig.compass_mode = meshtastic_CompassMode_DYNAMIC;
-                saveUIConfig();
+                nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg,
+                                  &uiconfig);
                screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
            }
-        } else if (selected == Fixed) {
+        } else if (selected == 2) {
            if (uiconfig.compass_mode != meshtastic_CompassMode_FIXED_RING) {
                uiconfig.compass_mode = meshtastic_CompassMode_FIXED_RING;
-                saveUIConfig();
+                nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg,
+                                  &uiconfig);
                screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
            }
-        } else if (selected == Freeze) {
+        } else if (selected == 3) {
            if (uiconfig.compass_mode != meshtastic_CompassMode_FREEZE_HEADING) {
                uiconfig.compass_mode = meshtastic_CompassMode_FREEZE_HEADING;
-                saveUIConfig();
+                nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg,
+                                  &uiconfig);
                screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
            }
-        } else if (selected == Back) {
+        } else if (selected == 0) {
            menuQueue = position_base_menu;
            screen->runNow();
        }
@@ -544,7 +561,6 @@ void menuHandler::compassNorthMenu()
 #if !MESHTASTIC_EXCLUDE_GPS
 void menuHandler::GPSToggleMenu()
 {
-
    static const char *optionsArray[] = {"Back", "Enabled", "Disabled"};
    BannerOverlayOptions bannerOptions;
    bannerOptions.message = "Toggle GPS";
@@ -571,28 +587,11 @@ void menuHandler::GPSToggleMenu()
 }
 #endif

-void menuHandler::BluetoothToggleMenu()
-{
-    static const char *optionsArray[] = {"Back", "Enabled", "Disabled"};
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Toggle Bluetooth";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 3;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1 || selected == 2) {
-            InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
-            inputBroker->injectInputEvent(&event);
-        }
-    };
-    bannerOptions.InitialSelected = config.bluetooth.enabled ? 1 : 2;
-    screen->showOverlayBanner(bannerOptions);
-}
-
 void menuHandler::BuzzerModeMenu()
 {
    static const char *optionsArray[] = {"All Enabled", "Disabled", "Notifications", "System Only"};
    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Buzzer Mode";
+    bannerOptions.message = "Beep Action";
    bannerOptions.optionsArrayPtr = optionsArray;
    bannerOptions.optionsCount = 4;
    bannerOptions.bannerCallback = [](int selected) -> void {
@@ -642,7 +641,7 @@ void menuHandler::BrightnessPickerMenu()
 #endif

            // Save to device
-            saveUIConfig();
+            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);

            LOG_INFO("Screen brightness set to %d", uiconfig.screen_brightness);
        }
@@ -653,13 +652,13 @@ void menuHandler::BrightnessPickerMenu()

 void menuHandler::switchToMUIMenu()
 {
-    static const char *optionsArray[] = {"No", "Yes"};
+    static const char *optionsArray[] = {"Yes", "No"};
    BannerOverlayOptions bannerOptions;
    bannerOptions.message = "Switch to MUI?";
    bannerOptions.optionsArrayPtr = optionsArray;
    bannerOptions.optionsCount = 2;
    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == 0) {
            config.display.displaymode = meshtastic_Config_DisplayConfig_DisplayMode_COLOR;
            config.bluetooth.enabled = false;
            service->reloadConfig(SEGMENT_CONFIG);
@@ -678,55 +677,52 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
    bannerOptions.optionsArrayPtr = optionsArray;
    bannerOptions.optionsCount = 10;
    bannerOptions.bannerCallback = [display](int selected) -> void {
-        uint8_t TFT_MESH_r = 0;
-        uint8_t TFT_MESH_g = 0;
-        uint8_t TFT_MESH_b = 0;
+        uint8_t r = 0;
+        uint8_t g = 0;
+        uint8_t b = 0;
        if (selected == 1) {
            LOG_INFO("Setting color to system default or defined variant");
            // Given just before we set all these to zero, we will allow this to go through
        } else if (selected == 2) {
            LOG_INFO("Setting color to Meshtastic Green");
-            TFT_MESH_r = 103;
-            TFT_MESH_g = 234;
-            TFT_MESH_b = 148;
+            r = 103;
+            g = 234;
+            b = 148;
        } else if (selected == 3) {
            LOG_INFO("Setting color to Yellow");
-            TFT_MESH_r = 255;
-            TFT_MESH_g = 255;
-            TFT_MESH_b = 128;
+            r = 255;
+            g = 255;
+            b = 128;
        } else if (selected == 4) {
            LOG_INFO("Setting color to Red");
-            TFT_MESH_r = 255;
-            TFT_MESH_g = 64;
-            TFT_MESH_b = 64;
+            r = 255;
+            g = 64;
+            b = 64;
        } else if (selected == 5) {
            LOG_INFO("Setting color to Orange");
-            TFT_MESH_r = 255;
-            TFT_MESH_g = 160;
-            TFT_MESH_b = 20;
+            r = 255;
+            g = 160;
+            b = 20;
        } else if (selected == 6) {
            LOG_INFO("Setting color to Purple");
-            TFT_MESH_r = 204;
-            TFT_MESH_g = 153;
-            TFT_MESH_b = 255;
+            r = 204;
+            g = 153;
+            b = 255;
        } else if (selected == 7) {
            LOG_INFO("Setting color to Teal");
-            TFT_MESH_r = 64;
-            TFT_MESH_g = 224;
-            TFT_MESH_b = 208;
+            r = 64;
+            g = 224;
+            b = 208;
        } else if (selected == 8) {
            LOG_INFO("Setting color to Pink");
-            TFT_MESH_r = 255;
-            TFT_MESH_g = 105;
-            TFT_MESH_b = 180;
+            r = 255;
+            g = 105;
+            b = 180;
        } else if (selected == 9) {
            LOG_INFO("Setting color to White");
-            TFT_MESH_r = 255;
-            TFT_MESH_g = 255;
-            TFT_MESH_b = 255;
-        } else {
-            menuQueue = system_base_menu;
-            screen->runNow();
+            r = 255;
+            g = 255;
+            b = 255;
        }

 #if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
@@ -735,14 +731,14 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
            display->fillRect(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
            display->setColor(WHITE);

-            if (TFT_MESH_r == 0 && TFT_MESH_g == 0 && TFT_MESH_b == 0) {
+            if (r == 0 && g == 0 && b == 0) {
 #ifdef TFT_MESH_OVERRIDE
                TFT_MESH = TFT_MESH_OVERRIDE;
 #else
                TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
 #endif
            } else {
-                TFT_MESH = COLOR565(TFT_MESH_r, TFT_MESH_g, TFT_MESH_b);
+                TFT_MESH = COLOR565(r, g, b);
            }

 #if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190)
@@ -750,13 +746,13 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
 #endif

            screen->setFrames(graphics::Screen::FOCUS_SYSTEM);
-            if (TFT_MESH_r == 0 && TFT_MESH_g == 0 && TFT_MESH_b == 0) {
+            if (r == 0 && g == 0 && b == 0) {
                uiconfig.screen_rgb_color = 0;
            } else {
-                uiconfig.screen_rgb_color = (TFT_MESH_r << 16) | (TFT_MESH_g << 8) | TFT_MESH_b;
+                uiconfig.screen_rgb_color = (r << 16) | (g << 8) | b;
            }
            LOG_INFO("Storing Value of %d to uiconfig.screen_rgb_color", uiconfig.screen_rgb_color);
-            saveUIConfig();
+            nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
        }
 #endif
    };
@@ -775,29 +771,6 @@ void menuHandler::rebootMenu()
            IF_SCREEN(screen->showSimpleBanner("Rebooting...", 0));
            nodeDB->saveToDisk();
            rebootAtMsec = millis() + DEFAULT_REBOOT_SECONDS * 1000;
-        } else {
-            menuQueue = power_menu;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::shutdownMenu()
-{
-    static const char *optionsArray[] = {"Back", "Confirm"};
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Shutdown Device?";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
-            IF_SCREEN(screen->showSimpleBanner("Shutting Down...", 0));
-            nodeDB->saveToDisk();
-            power->shutdown();
-        } else {
-            menuQueue = power_menu;
-            screen->runNow();
        }
    };
    screen->showOverlayBanner(bannerOptions);
@@ -805,7 +778,7 @@ void menuHandler::shutdownMenu()

 void menuHandler::addFavoriteMenu()
 {
-    screen->showNodePicker("Node To Favorite", 30000, [](uint32_t nodenum) -> void {
+    screen->showNodePicker("Node To Favorite", 30000, [](int nodenum) -> void {
        LOG_WARN("Nodenum: %u", nodenum);
        nodeDB->set_favorite(true, nodenum);
        screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
@@ -896,148 +869,6 @@ void menuHandler::wifiToggleMenu()
    screen->showOverlayBanner(bannerOptions);
 }

-void menuHandler::notificationsMenu()
-{
-    enum optionsNumbers { Back, BuzzerActions };
-    static const char *optionsArray[] = {"Back", "Buzzer Actions"};
-    static int optionsEnumArray[] = {Back, BuzzerActions};
-    int options = 2;
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Notifications";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == BuzzerActions) {
-            menuHandler::menuQueue = menuHandler::buzzermodemenupicker;
-            screen->runNow();
-        } else {
-            menuQueue = system_base_menu;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::screenOptionsMenu()
-{
-    // Check if brightness is supported
-    bool hasSupportBrightness = false;
-#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) || HAS_TFT
-    hasSupportBrightness = true;
-#endif
-
-    enum optionsNumbers { Back, Brightness, ScreenColor };
-    static const char *optionsArray[4] = {"Back"};
-    static int optionsEnumArray[4] = {Back};
-    int options = 1;
-
-    // Only show brightness for B&W displays
-    if (hasSupportBrightness && !HAS_TFT) {
-        optionsArray[options] = "Brightness";
-        optionsEnumArray[options++] = Brightness;
-    }
-
-    // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
-    optionsArray[options] = "Screen Color";
-    optionsEnumArray[options++] = ScreenColor;
-#endif
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Screen Options";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Brightness) {
-            menuHandler::menuQueue = menuHandler::brightness_picker;
-            screen->runNow();
-        } else if (selected == ScreenColor) {
-            menuHandler::menuQueue = menuHandler::tftcolormenupicker;
-            screen->runNow();
-        } else {
-            menuQueue = system_base_menu;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::powerMenu()
-{
-
-    enum optionsNumbers { Back, Reboot, Shutdown, MUI };
-    static const char *optionsArray[4] = {"Back"};
-    static int optionsEnumArray[4] = {Back};
-    int options = 1;
-
-    optionsArray[options] = "Reboot";
-    optionsEnumArray[options++] = Reboot;
-
-    optionsArray[options] = "Shutdown";
-    optionsEnumArray[options++] = Shutdown;
-
-#if HAS_TFT
-    optionsArray[options] = "Switch to MUI";
-    optionsEnumArray[options++] = MUI;
-#endif
-
-    BannerOverlayOptions bannerOptions;
-    bannerOptions.message = "Reboot / Shutdown";
-    bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = options;
-    bannerOptions.optionsEnumPtr = optionsEnumArray;
-    bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == Reboot) {
-            menuHandler::menuQueue = menuHandler::reboot_menu;
-            screen->runNow();
-        } else if (selected == Shutdown) {
-            menuHandler::menuQueue = menuHandler::shutdown_menu;
-            screen->runNow();
-        } else if (selected == MUI) {
-            menuHandler::menuQueue = menuHandler::mui_picker;
-            screen->runNow();
-        } else {
-            menuQueue = system_base_menu;
-            screen->runNow();
-        }
-    };
-    screen->showOverlayBanner(bannerOptions);
-}
-
-void menuHandler::keyVerificationInitMenu()
-{
-    screen->showNodePicker("Node to Verify", 30000,
-                           [](uint32_t selected) -> void { keyVerificationModule->sendInitialRequest(selected); });
-}
-
-void menuHandler::keyVerificationFinalPrompt()
-{
-    char message[40] = {0};
-    memset(message, 0, sizeof(message));
-    sprintf(message, "Verification: \n");
-    keyVerificationModule->generateVerificationCode(message + 15); // send the toPhone packet
-
-    if (screen) {
-        static const char *optionsArray[] = {"Reject", "Accept"};
-        graphics::BannerOverlayOptions options;
-        options.message = message;
-        options.durationMs = 30000;
-        options.optionsArrayPtr = optionsArray;
-        options.optionsCount = 2;
-        options.notificationType = graphics::notificationTypeEnum::selection_picker;
-        options.bannerCallback = [=](int selected) {
-            if (selected == 1) {
-                auto remoteNodePtr = nodeDB->getMeshNode(keyVerificationModule->getCurrentRemoteNode());
-                remoteNodePtr->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
-            }
-        };
-        screen->showOverlayBanner(options);
-    }
-}
-
 void menuHandler::handleMenuSwitch(OLEDDisplay *display)
 {
    if (menuQueue != menu_none)
@@ -1060,9 +891,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
    case clock_menu:
        clockMenu();
        break;
-    case system_base_menu:
-        systemBaseMenu();
-        break;
    case position_base_menu:
        positionBaseMenu();
        break;
@@ -1092,9 +920,6 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
    case reboot_menu:
        rebootMenu();
        break;
-    case shutdown_menu:
-        shutdownMenu();
-        break;
    case add_favorite:
        addFavoriteMenu();
        break;
@@ -1110,36 +935,10 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
    case wifi_toggle_menu:
        wifiToggleMenu();
        break;
-    case key_verification_init:
-        keyVerificationInitMenu();
-        break;
-    case key_verification_final_prompt:
-        keyVerificationFinalPrompt();
-        break;
-    case bluetooth_toggle_menu:
-        BluetoothToggleMenu();
-        break;
-    case notifications_menu:
-        notificationsMenu();
-        break;
-    case screen_options_menu:
-        screenOptionsMenu();
-        break;
-    case power_menu:
-        powerMenu();
-        break;
-    case throttle_message:
-        screen->showSimpleBanner("Too Many Attempts\nTry again in 60 seconds.", 5000);
-        break;
    }
    menuQueue = menu_none;
 }

-void menuHandler::saveUIConfig()
-{
-    nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uiconfig);
-}
-
 } // namespace graphics

 #endif
--- a/src/graphics/draw/MenuHandler.h
+++ b/src/graphics/draw/MenuHandler.h
@@ -1,5 +1,3 @@
-#pragma once
-#if HAS_SCREEN
 #include "configuration.h"
 namespace graphics
 {
@@ -23,20 +21,11 @@ class menuHandler
        tftcolormenupicker,
        brightness_picker,
        reboot_menu,
-        shutdown_menu,
        add_favorite,
        remove_favorite,
        test_menu,
        number_test,
-        wifi_toggle_menu,
-        bluetooth_toggle_menu,
-        notifications_menu,
-        screen_options_menu,
-        power_menu,
-        system_base_menu,
-        key_verification_init,
-        key_verification_final_prompt,
-        throttle_message
+        wifi_toggle_menu
    };
    static screenMenus menuQueue;

@@ -60,23 +49,12 @@ class menuHandler
    static void resetNodeDBMenu();
    static void BrightnessPickerMenu();
    static void rebootMenu();
-    static void shutdownMenu();
    static void addFavoriteMenu();
    static void removeFavoriteMenu();
    static void testMenu();
    static void numberTest();
    static void wifiBaseMenu();
    static void wifiToggleMenu();
-    static void notificationsMenu();
-    static void screenOptionsMenu();
-    static void powerMenu();
-
-  private:
-    static void saveUIConfig();
-    static void keyVerificationInitMenu();
-    static void keyVerificationFinalPrompt();
-    static void BluetoothToggleMenu();
 };

-} // namespace graphics
-#endif
+} // namespace graphics
--- a/src/graphics/draw/NotificationRenderer.cpp
+++ b/src/graphics/draw/NotificationRenderer.cpp
@@ -26,7 +26,7 @@ extern bool hasUnreadMessage;
 namespace graphics
 {

-InputEvent NotificationRenderer::inEvent;
+char NotificationRenderer::inEvent = INPUT_BROKER_NONE;
 int8_t NotificationRenderer::curSelected = 0;
 char NotificationRenderer::alertBannerMessage[256] = {0};
 uint32_t NotificationRenderer::alertBannerUntil = 0;  // 0 is a special case meaning forever
@@ -42,7 +42,7 @@ uint32_t NotificationRenderer::currentNumber = 0;
 uint32_t pow_of_10(uint32_t n)
 {
    uint32_t ret = 1;
-    for (uint32_t i = 0; i < n; i++) {
+    for (int i = 0; i < n; i++) {
        ret *= 10;
    }
    return ret;
@@ -72,31 +72,14 @@ void NotificationRenderer::resetBanner()
 {
    alertBannerMessage[0] = '\0';
    current_notification_type = notificationTypeEnum::none;
-
-    inEvent.inputEvent = INPUT_BROKER_NONE;
-    inEvent.kbchar = 0;
-    curSelected = 0;
-    alertBannerOptions = 0; // last x lines are seelctable options
-    optionsArrayPtr = nullptr;
-    optionsEnumPtr = nullptr;
-    alertBannerCallback = NULL;
-    pauseBanner = false;
-    numDigits = 0;
-    currentNumber = 0;
-
    nodeDB->pause_sort(false);
 }

 void NotificationRenderer::drawBannercallback(OLEDDisplay *display, OLEDDisplayUiState *state)
 {
-    if (!isOverlayBannerShowing() && alertBannerMessage[0] != '\0')
-        resetBanner();
    if (!isOverlayBannerShowing() || pauseBanner)
        return;
    switch (current_notification_type) {
-    case notificationTypeEnum::none:
-        // Do nothing - no notification to display
-        break;
    case notificationTypeEnum::text_banner:
    case notificationTypeEnum::selection_picker:
        drawAlertBannerOverlay(display, state);
@@ -129,40 +112,31 @@ void NotificationRenderer::drawNumberPicker(OLEDDisplay *display, OLEDDisplayUiS
    // modulo to extract
    uint8_t this_digit = (currentNumber % (pow_of_10(numDigits - curSelected))) / (pow_of_10(numDigits - curSelected - 1));
    // Handle input
-    if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS) {
+    if (inEvent == INPUT_BROKER_UP || inEvent == INPUT_BROKER_ALT_PRESS) {
        if (this_digit == 9) {
            currentNumber -= 9 * (pow_of_10(numDigits - curSelected - 1));
        } else {
            currentNumber += (pow_of_10(numDigits - curSelected - 1));
        }
-    } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS) {
+    } else if (inEvent == INPUT_BROKER_DOWN || inEvent == INPUT_BROKER_USER_PRESS) {
        if (this_digit == 0) {
            currentNumber += 9 * (pow_of_10(numDigits - curSelected - 1));
        } else {
            currentNumber -= (pow_of_10(numDigits - curSelected - 1));
        }
-    } else if (inEvent.inputEvent == INPUT_BROKER_ANYKEY) {
-        if (inEvent.kbchar > 47 && inEvent.kbchar < 58) { // have a digit
-            currentNumber -= this_digit * (pow_of_10(numDigits - curSelected - 1));
-            currentNumber += (inEvent.kbchar - 48) * (pow_of_10(numDigits - curSelected - 1));
-            curSelected++;
-        }
-    } else if (inEvent.inputEvent == INPUT_BROKER_SELECT || inEvent.inputEvent == INPUT_BROKER_RIGHT) {
+    } else if (inEvent == INPUT_BROKER_SELECT || inEvent == INPUT_BROKER_RIGHT) {
        curSelected++;
-    } else if (inEvent.inputEvent == INPUT_BROKER_LEFT) {
+    } else if (inEvent == INPUT_BROKER_LEFT) {
        curSelected--;
-    } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
-               alertBannerUntil != 0) {
+    } else if ((inEvent == INPUT_BROKER_CANCEL || inEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
        resetBanner();
-        return;
    }
    if (curSelected == numDigits) {
-        alertBannerCallback(currentNumber);
        resetBanner();
-        return;
+        alertBannerCallback(currentNumber);
    }

-    inEvent.inputEvent = INPUT_BROKER_NONE;
+    inEvent = INPUT_BROKER_NONE;
    if (alertBannerMessage[0] == '\0')
        return;

@@ -170,12 +144,12 @@ void NotificationRenderer::drawNumberPicker(OLEDDisplay *display, OLEDDisplayUiS
    const char *linePointers[totalLines + 1] = {0}; // this is sort of a dynamic allocation

    // copy the linestarts to display to the linePointers holder
-    for (uint16_t i = 0; i < lineCount; i++) {
+    for (int i = 0; i < lineCount; i++) {
        linePointers[i] = lineStarts[i];
    }
    std::string digits = " ";
    std::string arrowPointer = " ";
-    for (uint16_t i = 0; i < numDigits; i++) {
+    for (int i = 0; i < numDigits; i++) {
        // Modulo minus modulo to return just the current number
        digits += std::to_string((currentNumber % (pow_of_10(numDigits - i))) / (pow_of_10(numDigits - i - 1))) + " ";
        if (curSelected == i) {
@@ -216,18 +190,16 @@ void NotificationRenderer::drawNodePicker(OLEDDisplay *display, OLEDDisplayUiSta
    }

    // Handle input
-    if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS) {
+    if (inEvent == INPUT_BROKER_UP || inEvent == INPUT_BROKER_ALT_PRESS) {
        curSelected--;
-    } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS) {
+    } else if (inEvent == INPUT_BROKER_DOWN || inEvent == INPUT_BROKER_USER_PRESS) {
        curSelected++;
-    } else if (inEvent.inputEvent == INPUT_BROKER_SELECT) {
+    } else if (inEvent == INPUT_BROKER_SELECT) {
+        resetBanner();
        alertBannerCallback(selectedNodenum);
+
+    } else if ((inEvent == INPUT_BROKER_CANCEL || inEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
        resetBanner();
-        return;
-    } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
-               alertBannerUntil != 0) {
-        resetBanner();
-        return;
    }

    if (curSelected == -1)
@@ -235,7 +207,7 @@ void NotificationRenderer::drawNodePicker(OLEDDisplay *display, OLEDDisplayUiSta
    if (curSelected == alertBannerOptions)
        curSelected = 0;

-    inEvent.inputEvent = INPUT_BROKER_NONE;
+    inEvent = INPUT_BROKER_NONE;
    if (alertBannerMessage[0] == '\0')
        return;

@@ -333,11 +305,11 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp

    // Handle input
    if (alertBannerOptions > 0) {
-        if (inEvent.inputEvent == INPUT_BROKER_UP || inEvent.inputEvent == INPUT_BROKER_ALT_PRESS) {
+        if (inEvent == INPUT_BROKER_UP || inEvent == INPUT_BROKER_ALT_PRESS) {
            curSelected--;
-        } else if (inEvent.inputEvent == INPUT_BROKER_DOWN || inEvent.inputEvent == INPUT_BROKER_USER_PRESS) {
+        } else if (inEvent == INPUT_BROKER_DOWN || inEvent == INPUT_BROKER_USER_PRESS) {
            curSelected++;
-        } else if (inEvent.inputEvent == INPUT_BROKER_SELECT) {
+        } else if (inEvent == INPUT_BROKER_SELECT) {
            if (optionsEnumPtr != nullptr) {
                alertBannerCallback(optionsEnumPtr[curSelected]);
                optionsEnumPtr = nullptr;
@@ -345,11 +317,8 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
                alertBannerCallback(curSelected);
            }
            resetBanner();
-            return;
-        } else if ((inEvent.inputEvent == INPUT_BROKER_CANCEL || inEvent.inputEvent == INPUT_BROKER_ALT_LONG) &&
-                   alertBannerUntil != 0) {
+        } else if ((inEvent == INPUT_BROKER_CANCEL || inEvent == INPUT_BROKER_ALT_LONG) && alertBannerUntil != 0) {
            resetBanner();
-            return;
        }

        if (curSelected == -1)
@@ -357,14 +326,12 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
        if (curSelected == alertBannerOptions)
            curSelected = 0;
    } else {
-        if (inEvent.inputEvent == INPUT_BROKER_SELECT || inEvent.inputEvent == INPUT_BROKER_ALT_LONG ||
-            inEvent.inputEvent == INPUT_BROKER_CANCEL) {
+        if (inEvent == INPUT_BROKER_SELECT || inEvent == INPUT_BROKER_ALT_LONG || inEvent == INPUT_BROKER_CANCEL) {
            resetBanner();
-            return;
        }
    }

-    inEvent.inputEvent = INPUT_BROKER_NONE;
+    inEvent = INPUT_BROKER_NONE;
    if (alertBannerMessage[0] == '\0')
        return;

--- a/src/graphics/draw/NotificationRenderer.h
+++ b/src/graphics/draw/NotificationRenderer.h
@@ -11,8 +11,7 @@ namespace graphics
 class NotificationRenderer
 {
  public:
-    static InputEvent inEvent;
-    static char inKeypress;
+    static char inEvent;
    static int8_t curSelected;
    static char alertBannerMessage[256];
    static uint32_t alertBannerUntil; // 0 is a special case meaning forever
--- a/src/graphics/niche/Drivers/EInk/E0213A367.cpp
+++ b/src/graphics/niche/Drivers/EInk/E0213A367.cpp
@@ -1,84 +0,0 @@
-#include "./E0213A367.h"
-
-#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-
-using namespace NicheGraphics::Drivers;
-
-// Map the display controller IC's output to the connected panel
-void E0213A367::configScanning()
-{
-    // "Driver output control"
-    // Scan gates from 0 to 249 (vertical resolution 250px)
-    sendCommand(0x01);
-    sendData(0xF9);
-    sendData(0x00);
-}
-
-// Specify which information is used to control the sequence of voltages applied to move the pixels
-void E0213A367::configWaveform()
-{
-    // This command (0x37) is poorly documented
-    // As of July 2025, the datasheet for this display's controller IC is unavailable
-    // The values are supplied by Heltec, who presumably have privileged access to information from the display manufacturer
-    // Datasheet for the similar SSD1680 IC hints at the function of this command:
-
-    // "Spare VCOM OTP selection":
-    // Unclear why 0x40 is set. Sane values for related SSD1680 seem to be 0x80 or 0x00.
-    // Maybe value is redundant? No noticeable impact when set to 0x00.
-    // We'll leave it set to 0x40, following Heltec's lead, just in case.
-
-    // "Display Mode"
-    // Seems to specify whether a waveform stored in OTP should use display mode 1 or 2 (full refresh or differential refresh)
-
-    // Unusual that waveforms are programmed to OTP, but this meta information is not ..?
-
-    sendCommand(0x37); // "Write Register for Display Option" ?
-    sendData(0x40);    // "Spare VCOM OTP selection" ?
-    sendData(0x80);    // "Display Mode for WS[7:0]" ?
-    sendData(0x03);    // "Display Mode for WS[15:8]" ?
-    sendData(0x0E);    // "Display Mode [23:16]" ?
-
-    switch (updateType) {
-    case FAST:
-        sendCommand(0x3C); // Border waveform:
-        sendData(0x81);    // As specified by Heltec. Actually VCOM (0x80)?. Bit 0 seems redundant here.
-        break;
-    case FULL:
-    default:
-        sendCommand(0x3C); // Border waveform:
-        sendData(0x01);    // Follow LUT 1 (blink same as white pixels)
-        break;
-    }
-}
-
-// Tell controller IC which operations to run
-void E0213A367::configUpdateSequence()
-{
-    switch (updateType) {
-    case FAST:
-        sendCommand(0x22); // Set "update sequence"
-        sendData(0xFF);    // Will load LUT from OTP memory, Display mode 2 "differential refresh"
-        break;
-    case FULL:
-    default:
-        sendCommand(0x22); // Set "update sequence"
-        sendData(0xF7);    // Will load LUT from OTP memory, Display mode 1 "full refresh"
-        break;
-    }
-}
-
-// Once the refresh operation has been started,
-// begin periodically polling the display to check for completion, using the normal Meshtastic threading code
-// Only used when refresh is "async"
-void E0213A367::detachFromUpdate()
-{
-    switch (updateType) {
-    case FAST:
-        return beginPolling(50, 500); // At least 500ms for fast refresh
-    case FULL:
-    default:
-        return beginPolling(100, 1500); // At least 1.5 seconds for full refresh
-    }
-}
-
-#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS
--- a/src/graphics/niche/Drivers/EInk/E0213A367.h
+++ b/src/graphics/niche/Drivers/EInk/E0213A367.h
@@ -1,41 +0,0 @@
-/*
-
-E-Ink display driver
-    - SSD1682
-    - Manufacturer: SEEKINK
-    - Size: 2.13 inch
-    - Resolution: 122px x 255px
-    - Flex connector marking: HINK-E0213A162-A1 (hidden, printed on reverse)
-
-*/
-
-#pragma once
-
-#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-
-#include "configuration.h"
-
-#include "./SSD1682.h"
-
-namespace NicheGraphics::Drivers
-{
-class E0213A367 : public SSD1682
-{
-    // Display properties
-  private:
-    static constexpr uint32_t width = 122;
-    static constexpr uint32_t height = 250;
-    static constexpr UpdateTypes supported = (UpdateTypes)(FULL | FAST);
-
-  public:
-    E0213A367() : SSD1682(width, height, supported, 0) {}
-
-  protected:
-    void configScanning() override;
-    void configWaveform() override;
-    void configUpdateSequence() override;
-    void detachFromUpdate() override;
-};
-
-} // namespace NicheGraphics::Drivers
-#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS
--- a/src/graphics/niche/Drivers/EInk/SSD1682.cpp
+++ b/src/graphics/niche/Drivers/EInk/SSD1682.cpp
@@ -1,41 +0,0 @@
-#include "./SSD1682.h"
-
-#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-
-using namespace NicheGraphics::Drivers;
-
-SSD1682::SSD1682(uint16_t width, uint16_t height, EInk::UpdateTypes supported, uint8_t bufferOffsetX)
-    : SSD16XX(width, height, supported, bufferOffsetX)
-{
-}
-
-// SSD1682 only accepts single-byte x and y values
-// This causes an incompatibility with the default SSD16XX::configFullscreen
-void SSD1682::configFullscreen()
-{
-    // Define the boundaries of the "fullscreen" region, for the controller IC
-    static const uint8_t sx = bufferOffsetX; // Notice the offset
-    static const uint8_t sy = 0;
-    static const uint8_t ex = bufferRowSize + bufferOffsetX - 1; // End is "max index", not "count". Minus 1 handles this
-    static const uint8_t ey = height;
-
-    // Data entry mode - Left to Right, Top to Bottom
-    sendCommand(0x11);
-    sendData(0x03);
-
-    // Select controller IC memory region to display a fullscreen image
-    sendCommand(0x44); // Memory X start - end
-    sendData(sx);
-    sendData(ex);
-    sendCommand(0x45); // Memory Y start - end
-    sendData(sy);
-    sendData(ey);
-
-    // Place the cursor at the start of this memory region, ready to send image data x=0 y=0
-    sendCommand(0x4E); // Memory cursor X
-    sendData(sx);
-    sendCommand(0x4F); // Memory cursor y
-    sendData(sy);
-}
-
-#endif
--- a/src/graphics/niche/Drivers/EInk/SSD1682.h
+++ b/src/graphics/niche/Drivers/EInk/SSD1682.h
@@ -1,31 +0,0 @@
-/*
-
-E-Ink base class for displays based on SSD1682
-
-SSD1682 has a few quirks. We're implementing them here in a new base class,
-to avoid re-implementing them every time we need to add a new SSD1682-based display.
-
-*/
-
-#pragma once
-
-#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
-
-#include "configuration.h"
-
-#include "./SSD16XX.h"
-
-namespace NicheGraphics::Drivers
-{
-
-class SSD1682 : public SSD16XX
-{
-  public:
-    SSD1682(uint16_t width, uint16_t height, EInk::UpdateTypes supported, uint8_t bufferOffsetX = 0);
-    virtual void configFullscreen(); // Select memory region on controller IC
-    virtual void deepSleep() {}      // Not usable (image memory not retained)
-};
-
-} // namespace NicheGraphics::Drivers
-
-#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS
--- a/src/graphics/niche/InkHUD/Events.cpp
+++ b/src/graphics/niche/InkHUD/Events.cpp
@@ -39,8 +39,8 @@ void InkHUD::Events::begin()
 void InkHUD::Events::onButtonShort()
 {
    // Audio feedback (via buzzer)
-    // Short tone
-    playChirp();
+    // Short low tone
+    playBoop();
    // Cancel any beeping, buzzing, blinking
    // Some button handling suppressed if we are dismissing an external notification (see below)
    bool dismissedExt = dismissExternalNotification();
@@ -64,8 +64,8 @@ void InkHUD::Events::onButtonShort()
 void InkHUD::Events::onButtonLong()
 {
    // Audio feedback (via buzzer)
-    // Slightly longer than playChirp
-    playBoop();
+    // Low tone, longer than playBoop
+    playBeep();

    // Check which system applet wants to handle the button press (if any)
    SystemApplet *consumer = nullptr;
--- a/src/input/SeesawRotary.cpp
+++ b/src/input/SeesawRotary.cpp
@@ -1,83 +0,0 @@
-#ifdef ARCH_PORTDUINO
-#include "SeesawRotary.h"
-#include "input/InputBroker.h"
-
-using namespace concurrency;
-
-SeesawRotary *seesawRotary;
-
-SeesawRotary::SeesawRotary(const char *name) : OSThread(name)
-{
-    _originName = name;
-}
-
-bool SeesawRotary::init()
-{
-    if (inputBroker)
-        inputBroker->registerSource(this);
-
-    if (!ss.begin(SEESAW_ADDR)) {
-        return false;
-    }
-    // attachButtonInterrupts();
-
-    uint32_t version = ((ss.getVersion() >> 16) & 0xFFFF);
-    if (version != 4991) {
-        LOG_WARN("Wrong firmware loaded? %u", version);
-    } else {
-        LOG_INFO("Found Product 4991");
-    }
-    /*
-    #ifdef ARCH_ESP32
-        // Register callbacks for before and after lightsleep
-        // Used to detach and reattach interrupts
-        lsObserver.observe(&notifyLightSleep);
-        lsEndObserver.observe(&notifyLightSleepEnd);
-    #endif
-    */
-    ss.pinMode(SS_SWITCH, INPUT_PULLUP);
-
-    // get starting position
-    encoder_position = ss.getEncoderPosition();
-
-    ss.setGPIOInterrupts((uint32_t)1 << SS_SWITCH, 1);
-    ss.enableEncoderInterrupt();
-    canSleep = true; // Assume we should not keep the board awake
-
-    return true;
-}
-
-int32_t SeesawRotary::runOnce()
-{
-    InputEvent e;
-    e.inputEvent = INPUT_BROKER_NONE;
-    bool currentlyPressed = !ss.digitalRead(SS_SWITCH);
-
-    if (currentlyPressed && !wasPressed) {
-        e.inputEvent = INPUT_BROKER_SELECT;
-    }
-    wasPressed = currentlyPressed;
-
-    int32_t new_position = ss.getEncoderPosition();
-    // did we move arounde?
-    if (encoder_position != new_position) {
-        if (encoder_position == 0 && new_position != 1) {
-            e.inputEvent = INPUT_BROKER_ALT_PRESS;
-        } else if (new_position == 0 && encoder_position != 1) {
-            e.inputEvent = INPUT_BROKER_USER_PRESS;
-        } else if (new_position > encoder_position) {
-            e.inputEvent = INPUT_BROKER_USER_PRESS;
-        } else {
-            e.inputEvent = INPUT_BROKER_ALT_PRESS;
-        }
-        encoder_position = new_position;
-    }
-    if (e.inputEvent != INPUT_BROKER_NONE) {
-        e.source = this->_originName;
-        e.kbchar = 0x00;
-        this->notifyObservers(&e);
-    }
-
-    return 50;
-}
-#endif
--- a/src/input/SeesawRotary.h
+++ b/src/input/SeesawRotary.h
@@ -1,29 +0,0 @@
-#pragma once
-#ifdef ARCH_PORTDUINO
-
-#include "Adafruit_seesaw.h"
-#include "InputBroker.h"
-#include "concurrency/OSThread.h"
-#include "configuration.h"
-
-#define SS_SWITCH 24
-#define SS_NEOPIX 6
-
-#define SEESAW_ADDR 0x36
-
-class SeesawRotary : public Observable<const InputEvent *>, public concurrency::OSThread
-{
-  public:
-    const char *_originName;
-    bool init();
-    SeesawRotary(const char *name);
-    int32_t runOnce() override;
-
-  private:
-    Adafruit_seesaw ss;
-    int32_t encoder_position;
-    bool wasPressed = false;
-};
-
-extern SeesawRotary *seesawRotary;
-#endif
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -214,8 +214,6 @@ bool pauseBluetoothLogging = false;

 bool pmu_found;

-uint8_t pa_fan_percentage = 50;
-
 #if !MESHTASTIC_EXCLUDE_I2C
 // Array map of sensor types with i2c address and wire as we'll find in the i2c scan
 std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1] = {};
@@ -1377,36 +1375,16 @@ void setup()
    mqttInit();
 #endif

-#ifdef RADIO_FAN_EN
-    // Ability to disable FAN if PIN has been set with RADIO_FAN_EN.
+#ifdef RF95_FAN_EN
+    // Ability to disable FAN if PIN has been set with RF95_FAN_EN.
    // Make sure LoRa has been started before disabling FAN.
-#ifdef RADIO_FAN_PWM
-#if defined(ARCH_ESP32)
-    // Set up PWM at Channel 1 at 25KHz, using 8-bit resolution
-    // Turn ON/OFF fan to the specified value if enabled by config.
-    // code by https://github.com/gjelsoe/
-    if (ledcSetup(1, 25000, 8)) {
-        ledcAttachPin(RADIO_FAN_EN, 1);
-        LOG_INFO("PWM init C1 P%d\n", RADIO_FAN_EN);
-        // Set PWM duty cycle based on fan disabled state
-        ledcWrite(1, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-    } else {
-        LOG_WARN("PWM init fail P%d\n", RADIO_FAN_EN);
-    }
-#elif defined(ARCH_NRF52)
-    pinMode(RADIO_FAN_EN, OUTPUT);
-    analogWrite(RADIO_FAN_EN, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#endif
-#else
-    // Set up as ON/OFF switch of fan
-    pinMode(RADIO_FAN_EN, OUTPUT);
-    digitalWrite(RADIO_FAN_EN, LOW ^ 0);
-#endif
+    if (config.lora.pa_fan_disabled)
+        digitalWrite(RF95_FAN_EN, LOW ^ 0);
 #endif

 #ifndef ARCH_PORTDUINO

-    // Initialize Wifi
+        // Initialize Wifi
 #if HAS_WIFI
    initWifi();
 #endif
--- a/src/main.h
+++ b/src/main.h
@@ -78,8 +78,6 @@ extern uint32_t shutdownAtMsec;

 extern uint32_t serialSinceMsec;

-extern uint8_t pa_fan_percentage;
-
 // If a thread does something that might need for it to be rescheduled ASAP it can set this flag
 // This will suppress the current delay and instead try to run ASAP.
 extern bool runASAP;
--- a/src/mesh/Default.h
+++ b/src/mesh/Default.h
@@ -24,11 +24,6 @@
 #define min_node_info_broadcast_secs 60 * 60 // No regular broadcasts of more than once an hour
 #define min_neighbor_info_broadcast_secs 4 * 60 * 60
 #define default_map_publish_interval_secs 60 * 60
-#ifdef USERPREFS_RINGTONE_NAG_SECS
-#define default_ringtone_nag_secs USERPREFS_RINGTONE_NAG_SECS
-#else
-#define default_ringtone_nag_secs 60
-#endif

 #define default_mqtt_address "mqtt.meshtastic.org"
 #define default_mqtt_username "meshdev"
--- a/src/mesh/LR11x0Interface.cpp
+++ b/src/mesh/LR11x0Interface.cpp
@@ -3,7 +3,6 @@
 #include "Throttle.h"
 #include "configuration.h"
 #include "error.h"
-#include "main.h"
 #include "mesh/NodeDB.h"
 #ifdef LR11X0_DIO_AS_RF_SWITCH
 #include "rfswitch.h"
@@ -55,8 +54,6 @@ template <typename T> bool LR11x0Interface<T>::init()
    digitalWrite(LR11X0_POWER_EN, HIGH);
 #endif

-    enableFan();
-
 #if ARCH_PORTDUINO
    float tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
 // FIXME: correct logic to default to not using TCXO if no voltage is specified for LR11x0_DIO3_TCXO_VOLTAGE
--- a/src/mesh/NodeDB.cpp
+++ b/src/mesh/NodeDB.cpp
@@ -344,22 +344,6 @@ NodeDB::NodeDB()
        config.device.node_info_broadcast_secs = MAX_INTERVAL;
    if (config.position.position_broadcast_secs > MAX_INTERVAL)
        config.position.position_broadcast_secs = MAX_INTERVAL;
-    if (config.position.gps_update_interval > MAX_INTERVAL)
-        config.position.gps_update_interval = MAX_INTERVAL;
-    if (config.position.gps_attempt_time > MAX_INTERVAL)
-        config.position.gps_attempt_time = MAX_INTERVAL;
-    if (config.position.position_flags > MAX_INTERVAL)
-        config.position.position_flags = MAX_INTERVAL;
-    if (config.position.rx_gpio > MAX_INTERVAL)
-        config.position.rx_gpio = MAX_INTERVAL;
-    if (config.position.tx_gpio > MAX_INTERVAL)
-        config.position.tx_gpio = MAX_INTERVAL;
-    if (config.position.broadcast_smart_minimum_distance > MAX_INTERVAL)
-        config.position.broadcast_smart_minimum_distance = MAX_INTERVAL;
-    if (config.position.broadcast_smart_minimum_interval_secs > MAX_INTERVAL)
-        config.position.broadcast_smart_minimum_interval_secs = MAX_INTERVAL;
-    if (config.position.gps_en_gpio > MAX_INTERVAL)
-        config.position.gps_en_gpio = MAX_INTERVAL;
    if (moduleConfig.neighbor_info.update_interval > MAX_INTERVAL)
        moduleConfig.neighbor_info.update_interval = MAX_INTERVAL;
    if (moduleConfig.telemetry.device_update_interval > MAX_INTERVAL)
@@ -385,14 +369,6 @@ NodeDB::NodeDB()
        config.device.rebroadcast_mode = meshtastic_Config_DeviceConfig_RebroadcastMode_LOCAL_ONLY;
    }

-#if !HAS_TFT
-    if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-        // On a device without MUI, this display mode makes no sense, and will break logic.
-        config.display.displaymode = meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT;
-        config.bluetooth.enabled = true;
-    }
-#endif
-
    if (devicestateCRC != crc32Buffer(&devicestate, sizeof(devicestate)))
        saveWhat |= SEGMENT_DEVICESTATE;
    if (nodeDatabaseCRC != crc32Buffer(&nodeDatabase, sizeof(nodeDatabase)))
@@ -794,7 +770,7 @@ void NodeDB::installDefaultModuleConfig()
    moduleConfig.external_notification.output_buzzer = PIN_BUZZER;
    moduleConfig.external_notification.use_pwm = true;
    moduleConfig.external_notification.alert_message_buzzer = true;
-    moduleConfig.external_notification.nag_timeout = default_ringtone_nag_secs;
+    moduleConfig.external_notification.nag_timeout = 60;
 #endif
 #if defined(RAK4630) || defined(RAK11310) || defined(RAK3312)
    // Default to RAK led pin 2 (blue)
@@ -803,7 +779,7 @@ void NodeDB::installDefaultModuleConfig()
    moduleConfig.external_notification.active = true;
    moduleConfig.external_notification.alert_message = true;
    moduleConfig.external_notification.output_ms = 1000;
-    moduleConfig.external_notification.nag_timeout = default_ringtone_nag_secs;
+    moduleConfig.external_notification.nag_timeout = 60;
 #endif

 #ifdef HAS_I2S
@@ -812,10 +788,10 @@ void NodeDB::installDefaultModuleConfig()
    moduleConfig.external_notification.use_i2s_as_buzzer = true;
    moduleConfig.external_notification.alert_message_buzzer = true;
 #if HAS_TFT
-    if (moduleConfig.external_notification.nag_timeout == default_ringtone_nag_secs)
+    if (moduleConfig.external_notification.nag_timeout == 60)
        moduleConfig.external_notification.nag_timeout = 0;
 #else
-    moduleConfig.external_notification.nag_timeout = default_ringtone_nag_secs;
+    moduleConfig.external_notification.nag_timeout = 60;
 #endif
 #endif
 #ifdef NANO_G2_ULTRA
@@ -1325,13 +1301,6 @@ void NodeDB::loadFromDisk()

        saveToDisk(SEGMENT_MODULECONFIG);
    }
-#if ARCH_PORTDUINO
-    // set any config overrides
-    if (settingsMap[has_configDisplayMode]) {
-        config.display.displaymode = (_meshtastic_Config_DisplayConfig_DisplayMode)settingsMap[configDisplayMode];
-    }
-
-#endif
 }

 /** Save a protobuf from a file, return true for success */
--- a/src/mesh/PacketHistory.cpp
+++ b/src/mesh/PacketHistory.cpp
@@ -246,10 +246,8 @@ void PacketHistory::insert(PacketRecord &r)
 #if RECENT_WARN_AGE > 0
    if (tu->rxTimeMsec && (OldtrxTimeMsec < RECENT_WARN_AGE)) {
        if (!(tu->id == r.id && tu->sender == r.sender)) {
-#if VERBOSE_PACKET_HISTORY
            LOG_WARN("Packet History - insert: Reusing slot aged %ds < %ds RECENT_WARN_AGE", OldtrxTimeMsec / 1000,
                     RECENT_WARN_AGE / 1000);
-#endif
        } else {
            // debug only
 #if VERBOSE_PACKET_HISTORY
@@ -277,9 +275,7 @@ void PacketHistory::insert(PacketRecord &r)
 #endif

    if (r.rxTimeMsec == 0) {
-#if VERBOSE_PACKET_HISTORY
        LOG_WARN("Packet History - insert: I will not store packet with rxTimeMsec = 0.");
-#endif
        return; // Return early if we can't update the history
    }

--- a/src/mesh/RF95Interface.cpp
+++ b/src/mesh/RF95Interface.cpp
@@ -154,7 +154,10 @@ bool RF95Interface::init()
    digitalWrite(RF95_TXEN, 0);
 #endif

-    enableFan();
+#ifdef RF95_FAN_EN
+    pinMode(RF95_FAN_EN, OUTPUT);
+    digitalWrite(RF95_FAN_EN, 1);
+#endif

 #ifdef RF95_RXEN
    pinMode(RF95_RXEN, OUTPUT);
@@ -327,7 +330,10 @@ bool RF95Interface::sleep()
    // put chipset into sleep mode
    setStandby(); // First cancel any active receiving/sending
    lora->sleep();
-    disableFan();
+
+#ifdef RF95_FAN_EN
+    digitalWrite(RF95_FAN_EN, 0);
+#endif

    return true;
 }
--- a/src/mesh/RadioInterface.cpp
+++ b/src/mesh/RadioInterface.cpp
@@ -645,6 +645,10 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
    if (power > loraMaxPower) // Clamp power to maximum defined level
        power = loraMaxPower;

+    if (TX_GAIN_LORA == 0) { // Setting power in config with defined TX_GAIN_LORA will cause decreasing power on each reboot
+        config.lora.tx_power = power; // Set limited power in config
+    }
+
    LOG_INFO("Final Tx power: %d dBm", power);
 }

--- a/src/mesh/RadioLibInterface.cpp
+++ b/src/mesh/RadioLibInterface.cpp
@@ -531,37 +531,4 @@ bool RadioLibInterface::startSend(meshtastic_MeshPacket *txp)

        return res == RADIOLIB_ERR_NONE;
    }
-}
-
-void RadioLibInterface::enableFan()
-{
-#ifdef RADIO_FAN_EN
-
-#ifdef RADIO_FAN_PWM
-#if defined(ARCH_ESP32)
-    ledcWrite(1, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#elif defined(ARCH_NRF52)
-    analogWrite(RADIO_FAN_EN, config.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#endif
-#else
-    pinMode(RADIO_FAN_EN, OUTPUT);
-    digitalWrite(RADIO_FAN_EN, 1);
-#endif
-#endif
-}
-
-void RadioLibInterface::disableFan()
-{
-#ifdef RADIO_FAN_EN
-#ifdef RADIO_FAN_PWM
-#if defined(ARCH_ESP32)
-    ledcWrite(1, 0);
-#elif defined(ARCH_NRF52)
-    analogWrite(RADIO_FAN_EN, 0);
-#endif
-#else
-    pinMode(RADIO_FAN_EN, OUTPUT);
-    digitalWrite(RADIO_FAN_EN, 0);
-#endif
-#endif
 }
--- a/src/mesh/RadioLibInterface.h
+++ b/src/mesh/RadioLibInterface.h
@@ -146,9 +146,6 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified
    /** Attempt to find a packet in the TxQueue. Returns true if the packet was found. */
    virtual bool findInTxQueue(NodeNum from, PacketId id) override;

-    void enableFan();
-    void disableFan();
-
  private:
    /** if we have something waiting to send, start a short (random) timer so we can come check for collision before actually
     * doing the transmit */
--- a/src/mesh/SX126xInterface.cpp
+++ b/src/mesh/SX126xInterface.cpp
@@ -52,8 +52,6 @@ template <typename T> bool SX126xInterface<T>::init()
    pinMode(SX126X_POWER_EN, OUTPUT);
 #endif

-    enableFan();
-
 #if ARCH_PORTDUINO
    tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
    if (settingsMap[sx126x_ant_sw_pin] != RADIOLIB_NC) {
--- a/src/mesh/SX128xInterface.cpp
+++ b/src/mesh/SX128xInterface.cpp
@@ -35,7 +35,10 @@ template <typename T> bool SX128xInterface<T>::init()
    digitalWrite(SX128X_POWER_EN, HIGH);
 #endif

-    enableFan();
+#ifdef RF95_FAN_EN
+    pinMode(RF95_FAN_EN, OUTPUT);
+    digitalWrite(RF95_FAN_EN, 1);
+#endif

 #if ARCH_PORTDUINO
    if (settingsMap[rxen_pin] != RADIOLIB_NC) {
--- a/src/mesh/aes-ccm.cpp
+++ b/src/mesh/aes-ccm.cpp
@@ -10,32 +10,6 @@
 #include "aes-ccm.h"
 #if !MESHTASTIC_EXCLUDE_PKI

-/**
- * Constant-time comparison of two byte arrays
- *
- * @param a First byte array to compare
- * @param b Second byte array to compare
- * @param len Number of bytes to compare
- * @return 0 if arrays are equal, -1 if different or if inputs are invalid
- */
-static int constant_time_compare(const void *a_, const void *b_, size_t len)
-{
-    /* Cast to volatile to prevent the compiler from optimizing out their comparison. */
-    const volatile uint8_t *volatile a = (const volatile uint8_t *volatile)a_;
-    const volatile uint8_t *volatile b = (const volatile uint8_t *volatile)b_;
-    if (len == 0)
-        return 0;
-    if (a == NULL || b == NULL)
-        return -1;
-    size_t i;
-    volatile uint8_t d = 0U;
-    for (i = 0U; i < len; i++) {
-        d |= (a[i] ^ b[i]);
-    }
-    /* Constant time bit arithmetic to convert d > 0 to -1 and d = 0 to 0. */
-    return (1 & ((d - 1) >> 8)) - 1;
-}
-
 static void WPA_PUT_BE16(uint8_t *a, uint16_t val)
 {
    a[0] = val >> 8;
@@ -172,7 +146,7 @@ bool aes_ccm_ad(const uint8_t *key, size_t key_len, const uint8_t *nonce, size_t
    aes_ccm_encr(L, crypt, crypt_len, plain, a);
    aes_ccm_auth_start(M, L, nonce, aad, aad_len, crypt_len, x);
    aes_ccm_auth(plain, crypt_len, x);
-    if (constant_time_compare(x, t, M) != 0) {
+    if (memcmp(x, t, M) != 0) { // FIXME make const comp
        return false;
    }
    return true;
--- a/src/meshUtils.h
+++ b/src/meshUtils.h
@@ -13,9 +13,8 @@ template <class T> constexpr const T &clamp(const T &v, const T &lo, const T &hi

 #if HAS_SCREEN
 #define IF_SCREEN(X)                                                                                                             \
-    if (screen) {                                                                                                                \
-        X;                                                                                                                       \
-    }
+    if (screen)                                                                                                                  \
+        X;
 #else
 #define IF_SCREEN(...)
 #endif
--- a/src/modules/AdminModule.cpp
+++ b/src/modules/AdminModule.cpp
@@ -706,21 +706,13 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
            requiresReboot = false;
        }

-#ifdef RADIO_FAN_EN
-#ifdef RADIO_FAN_PWM
-#if defined(ARCH_ESP32)
-        ledcWrite(1, c.payload_variant.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#elif defined(ARCH_NFR52)
-        analogWrite(RADIO_FAN_EN, c.payload_variant.lora.pa_fan_disabled ? 0 : (pa_fan_percentage * 2.55));
-#endif
-#else
+#ifdef RF95_FAN_EN
        // Turn PA off if disabled by config
        if (c.payload_variant.lora.pa_fan_disabled) {
-            digitalWrite(RADIO_FAN_EN, LOW ^ 0);
+            digitalWrite(RF95_FAN_EN, LOW ^ 0);
        } else {
-            digitalWrite(RADIO_FAN_EN, HIGH ^ 0);
+            digitalWrite(RF95_FAN_EN, HIGH ^ 0);
        }
-#endif
 #endif
        config.lora = c.payload_variant.lora;
        // If we're setting region for the first time, init the region
@@ -1335,6 +1327,12 @@ void AdminModule::handleSendInputEvent(const meshtastic_AdminMessage_InputEvent
    LOG_DEBUG("Processing input event: event_code=%u, kb_char=%u, touch_x=%u, touch_y=%u", inputEvent.event_code,
              inputEvent.kb_char, inputEvent.touch_x, inputEvent.touch_y);

+    // Validate input parameters
+    if (inputEvent.event_code > INPUT_BROKER_ANYKEY) {
+        LOG_WARN("Invalid input event code: %u", inputEvent.event_code);
+        return;
+    }
+
    // Create InputEvent for injection
    InputEvent event = {.inputEvent = (input_broker_event)inputEvent.event_code,
                        .kbchar = (unsigned char)inputEvent.kb_char,
--- a/src/modules/CannedMessageModule.cpp
+++ b/src/modules/CannedMessageModule.cpp
@@ -454,7 +454,7 @@ int CannedMessageModule::handleDestinationSelectionInput(const InputEvent *event
        else if ((destIndex / columns) >= (scrollIndex + visibleRows))
            scrollIndex = (destIndex / columns) - visibleRows + 1;

-        screen->forceDisplay(true);
+        screen->forceDisplay();
        return 1;
    }

@@ -469,7 +469,7 @@ int CannedMessageModule::handleDestinationSelectionInput(const InputEvent *event
        if ((destIndex / columns) >= (scrollIndex + visibleRows))
            scrollIndex = (destIndex / columns) - visibleRows + 1;

-        screen->forceDisplay(true);
+        screen->forceDisplay();
        return 1;
    }

@@ -491,7 +491,7 @@ int CannedMessageModule::handleDestinationSelectionInput(const InputEvent *event

        runState = returnToCannedList ? CANNED_MESSAGE_RUN_STATE_ACTIVE : CANNED_MESSAGE_RUN_STATE_FREETEXT;
        returnToCannedList = false;
-        screen->forceDisplay(true);
+        screen->forceDisplay();
        return 1;
    }

@@ -504,7 +504,7 @@ int CannedMessageModule::handleDestinationSelectionInput(const InputEvent *event
        // UIFrameEvent e;
        // e.action = UIFrameEvent::Action::REGENERATE_FRAMESET;
        // notifyObservers(&e);
-        screen->forceDisplay(true);
+        screen->forceDisplay();
        return 1;
    }

@@ -716,7 +716,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
    }

    // Backspace
-    if (event->inputEvent == INPUT_BROKER_BACK && this->freetext.length() > 0) {
+    if (event->inputEvent == INPUT_BROKER_BACK) {
        payload = 0x08;
        lastTouchMillis = millis();
        runOnce();
@@ -739,8 +739,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
    }

    // Cancel (dismiss freetext screen)
-    if (event->inputEvent == INPUT_BROKER_CANCEL || event->inputEvent == INPUT_BROKER_ALT_LONG ||
-        (event->inputEvent == INPUT_BROKER_BACK && this->freetext.length() == 0)) {
+    if (event->inputEvent == INPUT_BROKER_CANCEL || event->inputEvent == INPUT_BROKER_ALT_LONG) {
        runState = CANNED_MESSAGE_RUN_STATE_INACTIVE;
        freetext = "";
        cursor = 0;
@@ -990,7 +989,6 @@ int32_t CannedMessageModule::runOnce()
                        }
                        this->cursor--;
                    }
-                } else {
                }
                break;
            case INPUT_BROKER_MSG_TAB: // Tab key: handled by input handler
@@ -2077,4 +2075,4 @@ String CannedMessageModule::drawWithCursor(String text, int cursor)
    return result;
 }

-#endif
+#endif
--- a/src/modules/ExternalNotificationModule.cpp
+++ b/src/modules/ExternalNotificationModule.cpp
@@ -362,8 +362,9 @@ ExternalNotificationModule::ExternalNotificationModule()
        if (nodeDB->loadProto(rtttlConfigFile, meshtastic_RTTTLConfig_size, sizeof(meshtastic_RTTTLConfig),
                              &meshtastic_RTTTLConfig_msg, &rtttlConfig) != LoadFileResult::LOAD_SUCCESS) {
            memset(rtttlConfig.ringtone, 0, sizeof(rtttlConfig.ringtone));
-            // The default ringtone is always loaded from userPrefs.jsonc
-            strncpy(rtttlConfig.ringtone, USERPREFS_RINGTONE_RTTTL, sizeof(rtttlConfig.ringtone));
+            strncpy(rtttlConfig.ringtone,
+                    "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
+                    sizeof(rtttlConfig.ringtone));
        }

        LOG_INFO("Init External Notification Module");
--- a/src/modules/KeyVerificationModule.cpp
+++ b/src/modules/KeyVerificationModule.cpp
@@ -2,9 +2,7 @@
 #include "KeyVerificationModule.h"
 #include "MeshService.h"
 #include "RTC.h"
-#include "graphics/draw/MenuHandler.h"
 #include "main.h"
-#include "meshUtils.h"
 #include "modules/AdminModule.h"
 #include <SHA256.h>

@@ -50,22 +48,18 @@ AdminMessageHandleResult KeyVerificationModule::handleAdminMessageForModule(cons
 bool KeyVerificationModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_KeyVerification *r)
 {
    updateState();
-    if (mp.pki_encrypted == false) {
+    if (mp.pki_encrypted == false)
        return false;
-    }
-    if (mp.from != currentRemoteNode) { // because the inital connection request is handled in allocReply()
+    if (mp.from != currentRemoteNode) // because the inital connection request is handled in allocReply()
        return false;
-    }
    if (currentState == KEY_VERIFICATION_IDLE) {
        return false; // if we're idle, the only acceptable message is an init, which should be handled by allocReply()
-    }

-    if (currentState == KEY_VERIFICATION_SENDER_HAS_INITIATED && r->nonce == currentNonce && r->hash2.size == 32 &&
-        r->hash1.size == 0) {
+    } else if (currentState == KEY_VERIFICATION_SENDER_HAS_INITIATED && r->nonce == currentNonce && r->hash2.size == 32 &&
+               r->hash1.size == 0) {
        memcpy(hash2, r->hash2.bytes, 32);
-        IF_SCREEN(screen->showNumberPicker("Enter Security Number", 60000, 6, [](int number_picked) -> void {
-            keyVerificationModule->processSecurityNumber(number_picked);
-        });)
+        if (screen)
+            screen->showSimpleBanner("Enter Security Number", 30000);

        meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
        cn->level = meshtastic_LogRecord_Level_WARNING;
@@ -85,20 +79,23 @@ bool KeyVerificationModule::handleReceivedProtobuf(const meshtastic_MeshPacket &
            memset(message, 0, sizeof(message));
            sprintf(message, "Verification: \n");
            generateVerificationCode(message + 15);
+            static const char *optionsArray[] = {"ACCEPT", "REJECT"};
            LOG_INFO("Hash1 matches!");
-            static const char *optionsArray[] = {"Reject", "Accept"};
-            // Don't try to put the array definition in the macro. Does not work with curly braces.
-            IF_SCREEN(graphics::BannerOverlayOptions options; options.message = message; options.durationMs = 30000;
-                      options.optionsArrayPtr = optionsArray; options.optionsCount = 2;
-                      options.notificationType = graphics::notificationTypeEnum::selection_picker;
-                      options.bannerCallback =
-                          [=](int selected) {
-                              if (selected == 1) {
-                                  auto remoteNodePtr = nodeDB->getMeshNode(currentRemoteNode);
-                                  remoteNodePtr->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
-                              }
-                          };
-                      screen->showOverlayBanner(options);)
+            if (screen) {
+                graphics::BannerOverlayOptions options;
+                options.message = message;
+                options.durationMs = 30000;
+                options.optionsArrayPtr = optionsArray;
+                options.optionsCount = 2;
+                options.notificationType = graphics::notificationTypeEnum::selection_picker;
+                options.bannerCallback = [=](int selected) {
+                    if (selected == 0) {
+                        auto remoteNodePtr = nodeDB->getMeshNode(currentRemoteNode);
+                        remoteNodePtr->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;
+                    }
+                };
+                screen->showOverlayBanner(options);
+            }
            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
            cn->level = meshtastic_LogRecord_Level_WARNING;
            sprintf(cn->message, "Final confirmation for incoming manual key verification %s", message);
@@ -123,7 +120,6 @@ bool KeyVerificationModule::sendInitialRequest(NodeNum remoteNode)
    // generate nonce
    updateState();
    if (currentState != KEY_VERIFICATION_IDLE) {
-        IF_SCREEN(graphics::menuHandler::menuQueue = graphics::menuHandler::throttle_message;)
        return false;
    }
    currentNonce = random();
@@ -194,8 +190,11 @@ meshtastic_MeshPacket *KeyVerificationModule::allocReply()
    responsePacket = allocDataProtobuf(response);

    responsePacket->pki_encrypted = true;
-    IF_SCREEN(snprintf(message, 25, "Security Number \n%03u %03u", currentSecurityNumber / 1000, currentSecurityNumber % 1000);
-              screen->showSimpleBanner(message, 30000); LOG_WARN("%s", message);)
+    if (screen) {
+        snprintf(message, 25, "Security Number \n%03u %03u", currentSecurityNumber / 1000, currentSecurityNumber % 1000);
+        screen->showSimpleBanner(message, 30000);
+        LOG_WARN("%s", message);
+    }
    meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
    cn->level = meshtastic_LogRecord_Level_WARNING;
    sprintf(cn->message, "Incoming Key Verification.\nSecurity Number\n%03u %03u", currentSecurityNumber / 1000,
@@ -259,7 +258,12 @@ void KeyVerificationModule::processSecurityNumber(uint32_t incomingNumber)
    p->priority = meshtastic_MeshPacket_Priority_HIGH;
    service->sendToMesh(p, RX_SRC_LOCAL, true);
    currentState = KEY_VERIFICATION_SENDER_AWAITING_USER;
-    IF_SCREEN(screen->requestMenu(graphics::menuHandler::key_verification_final_prompt);)
+    memset(message, 0, sizeof(message));
+    sprintf(message, "Verification: \n");
+    generateVerificationCode(message + 15); // send the toPhone packet
+    if (screen) {
+        screen->showSimpleBanner(message, 30000);
+    }
    meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
    cn->level = meshtastic_LogRecord_Level_WARNING;
    sprintf(cn->message, "Final confirmation for outgoing manual key verification %s", message);
@@ -278,7 +282,7 @@ void KeyVerificationModule::processSecurityNumber(uint32_t incomingNumber)
 void KeyVerificationModule::updateState()
 {
    if (currentState != KEY_VERIFICATION_IDLE) {
-        // check for the 60 second timeout
+        // check for the 30 second timeout
        if (currentNonceTimestamp < getTime() - 60) {
            resetToIdle();
        } else {
--- a/src/modules/KeyVerificationModule.h
+++ b/src/modules/KeyVerificationModule.h
@@ -27,8 +27,6 @@ class KeyVerificationModule : public ProtobufModule<meshtastic_KeyVerification>
    }*/
    virtual bool wantUIFrame() { return false; };
    bool sendInitialRequest(NodeNum remoteNode);
-    void generateVerificationCode(char *); // fills char with the user readable verification code
-    uint32_t getCurrentRemoteNode() { return currentRemoteNode; }

  protected:
    /* Called to handle a particular incoming message
@@ -58,8 +56,9 @@ class KeyVerificationModule : public ProtobufModule<meshtastic_KeyVerification>
    char message[40] = {0};

    void processSecurityNumber(uint32_t);
-    void updateState(); // check the timeouts and maybe reset the state to idle
-    void resetToIdle(); // Zero out module state
+    void updateState();                    // check the timeouts and maybe reset the state to idle
+    void resetToIdle();                    // Zero out module state
+    void generateVerificationCode(char *); // fills char with the user readable verification code
 };

 extern KeyVerificationModule *keyVerificationModule;
--- a/src/modules/Modules.cpp
+++ b/src/modules/Modules.cpp
@@ -53,7 +53,6 @@
 #endif
 #if ARCH_PORTDUINO
 #include "input/LinuxInputImpl.h"
-#include "input/SeesawRotary.h"
 #include "modules/Telemetry/HostMetrics.h"
 #if !MESHTASTIC_EXCLUDE_STOREFORWARD
 #include "modules/StoreForwardModule.h"
@@ -164,6 +163,7 @@ void setupModules()
        // Example: Put your module here
        // new ReplyModule();
 #if (HAS_BUTTON || ARCH_PORTDUINO) && !MESHTASTIC_EXCLUDE_INPUTBROKER
+
        if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
            rotaryEncoderInterruptImpl1 = new RotaryEncoderInterruptImpl1();
            if (!rotaryEncoderInterruptImpl1->init()) {
@@ -189,11 +189,6 @@ void setupModules()
 #endif // HAS_BUTTON
 #if ARCH_PORTDUINO
        if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-            seesawRotary = new SeesawRotary("SeesawRotary");
-            if (!seesawRotary->init()) {
-                delete seesawRotary;
-                seesawRotary = nullptr;
-            }
            aLinuxInputImpl = new LinuxInputImpl();
            aLinuxInputImpl->init();
        }
--- a/src/modules/TextMessageModule.cpp
+++ b/src/modules/TextMessageModule.cpp
@@ -4,7 +4,6 @@
 #include "PowerFSM.h"
 #include "buzz.h"
 #include "configuration.h"
-#include "graphics/Screen.h"
 TextMessageModule *textMessageModule;

 ProcessMessage TextMessageModule::handleReceived(const meshtastic_MeshPacket &mp)
@@ -18,10 +17,7 @@ ProcessMessage TextMessageModule::handleReceived(const meshtastic_MeshPacket &mp
    devicestate.rx_text_message = mp;
    devicestate.has_rx_text_message = true;

-    // Only trigger screen wake if configuration allows it
-    if (shouldWakeOnReceivedMessage()) {
-        powerFSM.trigger(EVENT_RECEIVED_MSG);
-    }
+    powerFSM.trigger(EVENT_RECEIVED_MSG);
    notifyObservers(&mp);

    return ProcessMessage::CONTINUE; // Let others look at this message also if they want
--- a/src/nimble/NimbleBluetooth.cpp
+++ b/src/nimble/NimbleBluetooth.cpp
@@ -29,7 +29,6 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
    uint8_t fromRadioBytes[meshtastic_FromRadio_size] = {0};
    size_t numBytes = 0;
    bool hasChecked = false;
-    bool phoneWants = false;

  protected:
    virtual int32_t runOnce() override
@@ -39,10 +38,10 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
            for (uint8_t i = 0; i < queue_size; i++) {
                handleToRadio(nimble_queue.at(i).data(), nimble_queue.at(i).length());
            }
-            LOG_DEBUG("Queue_size %u", queue_size);
+            LOG_WARN("Queue_size %u", queue_size);
            queue_size = 0;
        }
-        if (hasChecked == false && phoneWants == true) {
+        if (hasChecked == false) {
            numBytes = getFromRadio(fromRadioBytes);
            hasChecked = true;
        }
@@ -99,12 +98,9 @@ class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks
 {
    virtual void onRead(NimBLECharacteristic *pCharacteristic)
    {
-        int tries = 0;
-        bluetoothPhoneAPI->phoneWants = true;
-        while (!bluetoothPhoneAPI->hasChecked && tries < 100) {
+        while (!bluetoothPhoneAPI->hasChecked) {
            bluetoothPhoneAPI->setIntervalFromNow(0);
            delay(20);
-            tries++;
        }
        std::lock_guard<std::mutex> guard(bluetoothPhoneAPI->nimble_mutex);
        std::string fromRadioByteString(bluetoothPhoneAPI->fromRadioBytes,
@@ -115,7 +111,6 @@ class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks
            bluetoothPhoneAPI->setIntervalFromNow(0);
        bluetoothPhoneAPI->numBytes = 0;
        bluetoothPhoneAPI->hasChecked = false;
-        bluetoothPhoneAPI->phoneWants = false;
    }
 };

@@ -191,12 +186,7 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
            new meshtastic::BluetoothStatus(meshtastic::BluetoothStatus::ConnectionState::DISCONNECTED));

        if (bluetoothPhoneAPI) {
-            std::lock_guard<std::mutex> guard(bluetoothPhoneAPI->nimble_mutex);
            bluetoothPhoneAPI->close();
-            bluetoothPhoneAPI->hasChecked = false;
-            bluetoothPhoneAPI->phoneWants = false;
-            bluetoothPhoneAPI->numBytes = 0;
-            bluetoothPhoneAPI->queue_size = 0;
        }
    }
 };
--- a/src/platform/portduino/PortduinoGlue.cpp
+++ b/src/platform/portduino/PortduinoGlue.cpp
@@ -35,8 +35,6 @@ char *configPath = nullptr;
 char *optionMac = nullptr;
 bool forceSimulated = false;

-const char *argp_program_version = optstr(APP_VERSION);
-
 // FIXME - move setBluetoothEnable into a HALPlatform class
 void setBluetoothEnable(bool enable)
 {
@@ -667,21 +665,6 @@ bool loadConfig(const char *configPath)
            settingsStrings[hostMetrics_user_command] = (yamlConfig["HostMetrics"]["UserStringCommand"]).as<std::string>("");
        }

-        if (yamlConfig["Config"]) {
-            if (yamlConfig["Config"]["DisplayMode"]) {
-                settingsMap[has_configDisplayMode] = true;
-                if ((yamlConfig["Config"]["DisplayMode"]).as<std::string>("") == "TWOCOLOR") {
-                    settingsMap[configDisplayMode] = meshtastic_Config_DisplayConfig_DisplayMode_TWOCOLOR;
-                } else if ((yamlConfig["Config"]["DisplayMode"]).as<std::string>("") == "INVERTED") {
-                    settingsMap[configDisplayMode] = meshtastic_Config_DisplayConfig_DisplayMode_INVERTED;
-                } else if ((yamlConfig["Config"]["DisplayMode"]).as<std::string>("") == "COLOR") {
-                    settingsMap[configDisplayMode] = meshtastic_Config_DisplayConfig_DisplayMode_COLOR;
-                } else {
-                    settingsMap[configDisplayMode] = meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT;
-                }
-            }
-        }
-
        if (yamlConfig["General"]) {
            settingsMap[maxnodes] = (yamlConfig["General"]["MaxNodes"]).as<int>(200);
            settingsMap[maxtophone] = (yamlConfig["General"]["MaxMessageQueue"]).as<int>(100);
--- a/src/platform/portduino/PortduinoGlue.h
+++ b/src/platform/portduino/PortduinoGlue.h
@@ -109,9 +109,7 @@ enum configNames {
    mac_address,
    hostMetrics_interval,
    hostMetrics_channel,
-    hostMetrics_user_command,
-    configDisplayMode,
-    has_configDisplayMode
+    hostMetrics_user_command
 };
 enum { no_screen, x11, fb, st7789, st7735, st7735s, st7796, ili9341, ili9342, ili9486, ili9488, hx8357d };
 enum { no_touchscreen, xpt2046, stmpe610, gt911, ft5x06 };
--- a/userPrefs.jsonc
+++ b/userPrefs.jsonc
@@ -53,7 +53,5 @@
  // "USERPREFS_MQTT_ENCRYPTION_ENABLED": "true",
  // "USERPREFS_MQTT_TLS_ENABLED": "false",
  // "USERPREFS_MQTT_ROOT_TOPIC": "event/REPLACEME",
-  // "USERPREFS_RINGTONE_NAG_SECS": "60",
-  "USERPREFS_RINGTONE_RTTTL": "24:d=32,o=5,b=565:f6,p,f6,4p,p,f6,p,f6,2p,p,b6,p,b6,p,b6,p,b6,p,b,p,b,p,b,p,b,p,b,p,b,p,b,p,b,1p.,2p.,p",
  "USERPREFS_TZ_STRING": "tzplaceholder                                         "
 }
--- a/variants/ELECROW-ThinkNode-M1/nicheGraphics.h
+++ b/variants/ELECROW-ThinkNode-M1/nicheGraphics.h
@@ -104,11 +104,11 @@ void setupNicheGraphics()
    buttons->setHandlerDown(1, [backlight]() { backlight->peek(); });
    buttons->setHandlerLongPress(1, [backlight]() {
        backlight->latch();
-        playBoop();
+        playBeep();
    });
    buttons->setHandlerShortPress(1, [backlight]() {
        backlight->off();
-        playChirp();
+        playBoop();
    });

    // Begin handling button events
--- a/variants/betafpv_2400_tx_micro/variant.h
+++ b/variants/betafpv_2400_tx_micro/variant.h
@@ -12,7 +12,7 @@
 #define LORA_MISO 19
 #define LORA_MOSI 23
 #define LORA_CS 5
-#define RADIO_FAN_EN 17
+#define RF95_FAN_EN 17

 // #define LED_PIN 16 // This is a LED_WS2812 not a standard LED
 #define HAS_NEOPIXEL                         // Enable the use of neopixels
--- a/variants/diy/esp32c3_super_mini/pins_arduino.h
+++ b/variants/diy/esp32c3_super_mini/pins_arduino.h
@@ -1,24 +0,0 @@
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <stdint.h>
-
-static const uint8_t TX = 21;
-static const uint8_t RX = 20;
-
-static const uint8_t SDA = 1;
-static const uint8_t SCL = 0;
-
-static const uint8_t SS = 8;
-static const uint8_t MOSI = 7;
-static const uint8_t MISO = 6;
-static const uint8_t SCK = 10;
-
-static const uint8_t A0 = 0;
-static const uint8_t A1 = 1;
-static const uint8_t A2 = 2;
-static const uint8_t A3 = 3;
-static const uint8_t A4 = 4;
-static const uint8_t A5 = 5;
-
-#endif /* Pins_Arduino_h */
--- a/variants/diy/esp32c3_super_mini/variant.h
+++ b/variants/diy/esp32c3_super_mini/variant.h
@@ -1,61 +0,0 @@
-#ifndef _VARIANT_ESP32C3_SUPER_MINI_
-#define _VARIANT_ESP32C3_SUPER_MINI_
-
-/*----------------------------------------------------------------------------
- *        Headers
- *----------------------------------------------------------------------------*/
-
-#ifdef __cplusplus
-extern "C" {
-#endif // __cplusplus
-
-// I2C (Wire) & OLED
-#define WIRE_INTERFACES_COUNT (1)
-#define I2C_SDA (1)
-#define I2C_SCL (0)
-
-#define USE_SSD1306
-
-// GPS
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
-#define GPS_RX_PIN (20)
-#define GPS_TX_PIN (21)
-
-// Button
-#define BUTTON_PIN (9) // BOOT button
-
-// LoRa
-#define USE_LLCC68
-#define USE_SX1262
-// #define USE_RF95
-#define USE_SX1268
-
-#define LORA_DIO0 RADIOLIB_NC
-#define LORA_RESET (5)
-#define LORA_DIO1 (3)
-#define LORA_RXEN (2)
-#define LORA_BUSY (4)
-#define LORA_SCK (10)
-#define LORA_MISO (6)
-#define LORA_MOSI (7)
-#define LORA_CS (8)
-
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_BUSY LORA_BUSY
-#define SX126X_RESET LORA_RESET
-#define SX126X_RXEN LORA_RXEN
-
-#define SX126X_DIO3_TCXO_VOLTAGE (1.8)
-#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
-
-#ifdef __cplusplus
-}
-#endif
-
-/*----------------------------------------------------------------------------
- *        Arduino objects - C++ only
- *----------------------------------------------------------------------------*/
-
-#endif
--- a/variants/diy/platformio.ini
+++ b/variants/diy/platformio.ini
@@ -96,20 +96,6 @@ board_level = extra
 build_flags = ${env:seeed_xiao_nrf52840_kit.build_flags} -D PRIVATE_HW -DXIAO_BLE_LEGACY_PINOUT -DEBYTE_E22 -DEBYTE_E22_900M30S
 build_unflags = -DGPS_L76K

-; Seeed XIAO nRF52840 + EBYTE E22-900M30S - Pinout matching Wio-SX1262 (SKU 113010003)
-[env:seeed_xiao_nrf52840_e22_900m30s]
-extends = env:seeed_xiao_nrf52840_kit
-board_level = extra
-build_flags = ${env:seeed_xiao_nrf52840_kit.build_flags} -D PRIVATE_HW -DEBYTE_E22 -DEBYTE_E22_900M30S
-build_unflags = -DGPS_L76K
-
-; Seeed XIAO nRF52840 + EBYTE E22-900M33S - Pinout matching Wio-SX1262 (SKU 113010003)
-[env:seeed_xiao_nrf52840_e22_900m33s]
-extends = env:seeed_xiao_nrf52840_kit
-board_level = extra
-build_flags = ${env:seeed_xiao_nrf52840_kit.build_flags} -D PRIVATE_HW -DEBYTE_E22 -DEBYTE_E22_900M33S
-build_unflags = -DGPS_L76K
-
 ; Seeed XIAO nRF52840 + XIAO Wio SX1262 DIY
 [env:seeed-xiao-nrf52840-wio-sx1262]
 board = xiao_ble_sense
@@ -141,16 +127,3 @@ build_flags =
  -D ARDUINO_USB_MODE=0
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -I variants/diy/t-energy-s3_e22
-
-; ESP32 C3 Super Mini Development Board
-; https://www.espboards.dev/esp32/esp32-c3-super-mini/
-[env:esp32c3_super_mini]
-extends = esp32c3_base
-board = esp32-c3-devkitm-1
-build_flags =
-  ${esp32_base.build_flags}
-  -D PRIVATE_HW
-  -I variants/diy/esp32c3_super_mini
-  -D ARDUINO_USB_MODE=1
-  -D ARDUINO_USB_CDC_ON_BOOT=1
-board_level = extra
--- a/variants/diy/xiao_ble/README.md
+++ b/variants/diy/xiao_ble/README.md
@@ -1,168 +1,264 @@
-# XIAO nrf52840/nrf52840 Sense + Ebyte E22-900M30S
+#

-_A step-by-step guide for macOS and Linux._
+<p align="center" style="font-size: 28px;">
+    Xiao BLE/BLE Sense + Ebyte E22-900M30S
+</p>
+
+<p align="center" style="font-size: 20px;">
+    A step-by-step guide for macOS and Linux
+</p>

 ## Introduction

-This guide will walk you through everything needed to get the XIAO nrf52840 (or XIAO nrf52840 Sense) running Meshtastic using an Ebyte E22-900M30S LoRa module. The combination of the E22 with an nRF52840 MCU is desirable because it allows for both very low idle (Rx) power draw _and_ high transmit power.
+This guide will walk you through everything needed to get the Xiao BLE (or BLE Sense) running Meshtastic using an Ebyte E22-900M30S LoRa module. The combination of the E22 with an nRF52840 MCU is desirable because it allows for both very low idle (Rx) power draw <i>and</i> high transmit power. The Xiao BLE is a small but surprisingly well-appointed nRF52840 board, with enough GPIO for most Meshtastic applications and a built-in LiPo charger. The E22, on the other hand, is a famously inscrutable and mysterious beast. It is one of the more readily available LoRa modules capable of transmitting at 30 dBm, and includes an LNA to boost its Rx sensitivity a few dB beyond that of the SX1262. However, its documentation is relatively sparse overall, and seems to merely hint at (or completely omit) several key details regarding its functionality. Thus, much of what follows is a synthesis of my observations and inferences over the course of many hours of trial and error.

-The XIAO nrf52840 is a small but surprisingly well-appointed nRF52840 board, with enough GPIO for most Meshtastic applications and a built-in LiPo charger.
-
-The E22, on the other hand, is a famously inscrutable and mysterious beast. It is one of the more readily available LoRa modules capable of transmitting at 30 dBm, and includes an LNA to boost its Rx sensitivity a few dB beyond that of the SX1262.
-
-However, its documentation is relatively sparse overall, and seems to merely hint at (or completely omit) several key details regarding its functionality. Thus, much of what follows is a synthesis of my observations and inferences over the course of many hours of trial and error.
-
-### Acknowledgement and Friendly Disclaimer
+<h3>Acknowledgement and friendly disclaimer</h3>

 Huge thanks to those in the community who have forged the way with the E22, without whose hard work none of this would have been possible! (thebentern, riddick, rainer_vie, beegee-tokyo, geeksville, caveman99, Der_Bear, PlumRugOfDoom, BigCorvus, and many others.)

+<br>
+
 Please take the conclusions here as a tentative work in progress, representing my current (and fairly limited) understanding of the E22 when paired with this particular MCU. It is my hope that this guide will be helpful to others who are interested in trying a DIY Meshtastic build, and also be subject to revision by folks with more experience and better test equipment.

-### Obligatory Liability Disclaimer
+### Obligatory liability disclaimer

 This guide and all associated content is for informational purposes only. The information presented is intended for consumption only by persons having appropriate technical skill and judgement, to be used entirely at their own discretion and risk. The authors of this guide in no way provide any warranty, express or implied, toward the content herein, nor its correctness, safety, or suitability to any particular purpose. By following the instructions in this guide in part or in full, you assume all responsibility for all potential risks, including but not limited to fire, property damage, bodily injury, and death.

-## 1. Wire the board
+### Note

-Connecting the E22 to the XIAO nrf52840 is straightforward, but there are a few gotchas to be mindful of.
+These instructions assume you are running macOS or Linux, but it should be relatively easy to translate each command for Windows. (In this case, in step 2 below, each line of `xiao_ble.sh` would also need to be converted to the equivalent Windows CLI command and run individually.)

-### On the XIAO nrf52840
+## 1. Update Bootloader

- Pins D4 and D5 are currently mapped to `PIN_WIRE_SDA` and `PIN_WIRE_SCL`, respectively. If you are not using I²C and would like to free up pins D4 and D5 for use as GPIO, `PIN_WIRE_SDA` and `PIN_WIRE_SCL` can be reassigned to any two other unused pin numbers.
- Pins D6 and D7 were originally mapped to the TX and RX pins for serial interface 1 (`PIN_SERIAL1_RX` and `PIN_SERIAL1_TX`) but are currently set to -1 in `variant.h`. If you need to expose a serial interface, you can restore these pins and move e.g. `SX126X_RXEN` to pin 4 or 5 (the opposite should work too).
+The first thing you will need to do is update the Xiao BLE's bootloader. The stock bootloader is functionally very similar to the Adafruit nRF52 UF2 bootloader, but apparently not quite enough so to work with Meshtastic out of the box.

-### On the E22
+1. Connect the Xiao BLE to your computer via USB-C.

- There are two options for the E22's `TXEN` pin:
-  1. It can be connected to the MCU on the pin defined as `SX126X_TXEN` in `variant.h`. In this configuration, the MCU will control Tx/Rx switching "manually". As long as `SX126X_TXEN` and `SX126X_RXEN` are both defined in `variant.h` (and neither is set to `RADIOLIB_NC`), `SX126xInterface.cpp` will initialize the E22 correctly for this mode.
-  2. Alternately, it can be connected to the E22's `DIO2` pin only, with neither `TXEN` nor `DIO2` being connected to the MCU. In this configuration, the E22 will control Tx/Rx switching automatically. In `variant.h`, as long as `SX126X_TXEN` is defined as `RADIOLIB_NC`, and `SX126X_RXEN` is defined and connected to the E22's `RXEN` pin, and `E22_TXEN_CONNECTED_TO_DIO2` is defined, `SX126xInterface.cpp` will initialize the E22 correctly for this mode. This configuration frees up a GPIO, and presents no drawbacks that I have found.
- Note that any combination other than the two described above will likely result in unexpected behavior. In my testing, some of these other configurations appeared to "work" at first glance, but every one I tried had at least one of the following flaws: weak Tx power, extremely poor Rx sensitivity, or the E22 overheating because TXEN was never pulled low, causing its PA to stay on indefinitely.
- Along the same lines, it is a good idea to check the E22's temperature frequently by lightly touching the shield. If you feel the shield getting hot (i.e. approaching uncomfortable to touch) near pins 1, 2, and 3, something is probably misconfigured; disconnect both the XIAO nrf52840 and E22 from power and double check wiring and pin mapping.
- Whether you opt to let the E22 control Rx and Tx or handle this manually, **the E22's `RXEN` pin must always be connected to the MCU** on the pin defined as `SX126X_RXEN` in `variant.h`.
+2. Install `adafruit-nrfutil` by following the instructions <a href="https://github.com/adafruit/Adafruit_nRF52_nrfutil">here</a>.

-#### Note
+3. Open a terminal window and navigate to `firmware/variants/xiao_ble` (where `firmware` is the directory into which you have cloned the <a href="https://github.com/meshtastic/firmware">Meshtastic firmware repo</a>).

-The default pin mapping in `variant.h` uses "Automatic Tx/Rx switching" mode.
+4. Run the following command, replacing `/dev/cu.usbmodem2101` with the serial port your Xiao BLE is connected to:

-If you wire your board for Manual Tx/Rx Switching Mode, `SX126X_TXEN` must be defined (`#define #define SX126X_TXEN D6`) in `variants/seeed_xiao_nrf52840_kit/variant.h` in the code block following:
+   ```bash
+   adafruit-nrfutil --verbose dfu serial --package xiao_nrf52840_ble_bootloader-0.7.0-22-g277a0c8_s140_7.3.0.zip --port /dev/cu.usbmodem2101 -b 115200 --singlebank --touch 1200
+   ```

-```c
-#ifdef XIAO_BLE_LEGACY_PINOUT
-// Legacy xiao_ble variant pinout for third-party SX126x modules e.g. EBYTE E22
-```
+5. If all goes well, the Xiao BLE's red LED should start to pulse slowly, and you should see a new USB storage device called `XIAO-BOOT` appear under `Locations` in Finder.

-### Example Wiring for Automatic Tx/Rx Switching Mode
+&nbsp;

-#### MCU -> E22 Connections
+## 2. PlatformIO Environment Preparation

-| XIAO nrf52840 pin | variant.h definition | E22 pin   | Notes                                                                                                                |
-| :---------------- | :------------------- | :-------- | :------------------------------------------------------------------------------------------------------------------- |
-| D0                | SX126X_CS            | 19 (NSS)  |                                                                                                                      |
-| D1                | SX126X_DIO1          | 13 (DIO1) |                                                                                                                      |
-| D2                | SX126X_BUSY          | 14 (BUSY) |                                                                                                                      |
-| D3                | SX126X_RESET         | 15 (NRST) |                                                                                                                      |
-| D7                | SX126X_RXEN          | 6 (RXEN)  | These pins must still be connected, and `SX126X_RXEN` defined in `variant.h`, otherwise Rx sensitivity will be poor. |
-| D8                | PIN_SPI_SCK          | 18 (SCK)  |                                                                                                                      |
-| D9                | PIN_SPI_MISO         | 16 (MISO) |                                                                                                                      |
-| D10               | PIN_SPI_MOSI         | 17 (MOSI) |                                                                                                                      |
+Before building Meshtastic for the Xiao BLE + E22, it is necessary to pull in SoftDevice 7.3.0 and its associated linker script (nrf52840_s140_v7.ld) from Seeed Studio's Arduino core. The `xiao_ble.sh` script does this.

-#### E22 -> E22 Connections
+1. In your terminal window, run the following command:
+
+   ```bash
+   sudo ./xiao_ble.sh
+   ```
+
+&nbsp;
+
+## 3. Build Meshtastic
+
+At this point, you should be able to build the firmware successfully.
+
+1. In VS Code, press `Command Shift P` to bring up the command palette.
+
+2. Search for and run the `Developer: Reload Window` command.
+
+3. Bring up the command palette again with `Command Shift P`. Search for and run the `PlatformIO: Pick Project Environment` command.
+
+4. In the list of environments, select `env:xiao_ble`. PlatformIO may update itself for a minute or two, and should let you know once done.
+
+5. Return to the command palette once again (`Command Shift P`). Search for and run the `PlatformIO: Build` command.
+
+6. PlatformIO will build the project. After a few minutes you should see a green `SUCCESS` message.
+
+&nbsp;
+
+## 4. Wire the board
+
+Connecting the E22 to the Xiao BLE is straightforward, but there are a few gotchas to be mindful of.
+
+- <strong>On the Xiao BLE:</strong>
+
+  - Pins D4 and D5 are currently mapped to `PIN_WIRE_SDA` and `PIN_WIRE_SCL`, respectively. If you are not using I²C and would like to free up pins D4 and D5 for use as GPIO, `PIN_WIRE_SDA` and `PIN_WIRE_SCL` can be reassigned to any two other unused pin numbers.
+
+  - Pins D6 and D7 were originally mapped to the TX and RX pins for serial interface 1 (`PIN_SERIAL1_RX` and `PIN_SERIAL1_TX`) but are currently set to -1 in `variant.h`. If you need to expose a serial interface, you can restore these pins and move e.g. `SX126X_RXEN` to pin 4 or 5 (the opposite should work too).
+
+- <strong>On the E22:</strong>
+
+  - There are two options for the E22's `TXEN` pin:
+
+    1. It can be connected to the MCU on the pin defined as `SX126X_TXEN` in `variant.h`. In this configuration, the MCU will control Tx/Rx switching "manually". As long as `SX126X_TXEN` and `SX126X_RXEN` are both defined in `variant.h` (and neither is set to `RADIOLIB_NC`), `SX126xInterface.cpp` will initialize the E22 correctly for this mode.
+
+    2. Alternately, it can be connected to the E22's `DIO2` pin only, with neither `TXEN` nor `DIO2` being connected to the MCU. In this configuration, the E22 will control Tx/Rx switching automatically. In `variant.h`, as long as `SX126X_TXEN` is defined as `RADIOLIB_NC`, and `SX126X_RXEN` is defined and connected to the E22's `RXEN` pin, and `E22_TXEN_CONNECTED_TO_DIO2` is defined, `SX126xInterface.cpp` will initialize the E22 correctly for this mode. This configuration frees up a GPIO, and presents no drawbacks that I have found.
+
+    - Note that any combination other than the two described above will likely result in unexpected behavior. In my testing, some of these other configurations appeared to "work" at first glance, but every one I tried had at least one of the following flaws: weak Tx power, extremely poor Rx sensitivity, or the E22 overheating because TXEN was never pulled low, causing its PA to stay on indefinitely.
+
+    - Along the same lines, it is a good idea to check the E22's temperature frequently by lightly touching the shield. If you feel the shield getting hot (i.e. approaching uncomfortable to touch) near pins 1, 2, and 3, something is probably misconfigured; disconnect both the Xiao BLE and E22 from power and double check wiring and pin mapping.
+
+  - Whether you opt to let the E22 control Rx and Tx or handle this manually, <strong>the E22's `RXEN` pin must always be connected to the MCU</strong> on the pin defined as `SX126X_RXEN` in `variant.h`.
+
+<h3>Note</h3>
+
+The default pin mapping in `variant.h` uses 'automatic Tx/Rx switching' mode. If you wire your board for manual Rx/Tx switching, make sure to update `variant.h` accordingly by commenting/uncommenting the necessary lines in the 'E22 Tx/Rx control options' section.
+
+&nbsp;
+
+---
+
+&nbsp;
+
+<h3>Example wiring for "E22 automatic Tx/Rx switching" mode:</h3>
+&nbsp;
+
+<strong>MCU -> E22 connections</strong>
+
+| Xiao BLE pin | variant.h definition | E22 pin   | Notes                                                                                                                |
+| :----------- | :------------------- | :-------- | :------------------------------------------------------------------------------------------------------------------- |
+| D0           | SX126X_CS            | 19 (NSS)  |                                                                                                                      |
+| D1           | SX126X_DIO1          | 13 (DIO1) |                                                                                                                      |
+| D2           | SX126X_BUSY          | 14 (BUSY) |                                                                                                                      |
+| D3           | SX126X_RESET         | 15 (NRST) |                                                                                                                      |
+| D7           | SX126X_RXEN          | 6 (RXEN)  | These pins must still be connected, and `SX126X_RXEN` defined in `variant.h`, otherwise Rx sensitivity will be poor. |
+| D8           | PIN_SPI_SCK          | 18 (SCK)  |                                                                                                                      |
+| D9           | PIN_SPI_MISO         | 16 (MISO) |                                                                                                                      |
+| D10          | PIN_SPI_MOSI         | 17 (MOSI) |                                                                                                                      |
+
+&nbsp;
+&nbsp;
+
+<strong>E22 -> E22 connections:</strong>

 | E22 pin | E22 pin | Notes                                                                     |
 | :------ | :------ | :------------------------------------------------------------------------ |
 | TXEN    | DIO2    | These must be physically connected for automatic Tx/Rx switching to work. |

-#### Note
+<h3>Note</h3>

 The schematic (`xiao-ble-e22-schematic.png`) in the `eagle-project` directory uses this wiring.

-### Example Wiring for Manual Tx/Rx Switching Mode
+&nbsp;

-#### MCU -> E22 Connections
+---

-| XIAO nrf52840 pin | variant.h definition | E22 pin   | Notes |
-| :---------------- | :------------------- | :-------- | :---- |
-| D0                | SX126X_CS            | 19 (NSS)  |       |
-| D1                | SX126X_DIO1          | 13 (DIO1) |       |
-| D2                | SX126X_BUSY          | 14 (BUSY) |       |
-| D3                | SX126X_RESET         | 15 (NRST) |       |
-| D6                | SX126X_TXEN          | 7 (TXEN)  |       |
-| D7                | SX126X_RXEN          | 6 (RXEN)  |       |
-| D8                | PIN_SPI_SCK          | 18 (SCK)  |       |
-| D9                | PIN_SPI_MISO         | 16 (MISO) |       |
-| D10               | PIN_SPI_MOSI         | 17 (MOSI) |       |
+&nbsp;

-#### E22 -> E22 connections
+<h3>Example wiring for "Manual Tx/Rx switching" mode:</h3>

-_(none)_
+<strong>MCU -> E22 connections</strong>

-## 2. Build Meshtastic
+| Xiao BLE pin | variant.h definition | E22 pin   | Notes |
+| :----------- | :------------------- | :-------- | :---- |
+| D0           | SX126X_CS            | 19 (NSS)  |       |
+| D1           | SX126X_DIO1          | 13 (DIO1) |       |
+| D2           | SX126X_BUSY          | 14 (BUSY) |       |
+| D3           | SX126X_RESET         | 15 (NRST) |       |
+| D6           | SX126X_TXEN          | 7 (TXEN)  |       |
+| D7           | SX126X_RXEN          | 6 (RXEN)  |       |
+| D8           | PIN_SPI_SCK          | 18 (SCK)  |       |
+| D9           | PIN_SPI_MISO         | 16 (MISO) |       |
+| D10          | PIN_SPI_MOSI         | 17 (MOSI) |       |

-1. Follow the [Building Meshtastic Firmware](https://meshtastic.org/docs/development/firmware/build/) documentation, stop after **Build** → **Step 2**
-2. For **Build** → **Step 3**, select `xiao_ble` as your target
-3. Adjust source code if you:
-   - Wired your board for Manual Tx/Rx Switching Mode: see [Wire the Board](#1-wire-the-board)
-   - Used an E22-900M33S module  
-     (this step is important to avoid **damaging the power amplifier** in the M33S module and **transmitting power above legal limits**!):
-     1. Open `variants/diy/platformio.ini`
-     2. Search for `[env:xiao_ble]`
-     3. In the line starting with `build_flags` within this section, change `-DEBYTE_E22_900M30S` to `-DEBYTE_E22_900M33S`
-4. Follow **Build** → **Step 4** to build the firmware
-5. Stop here, because the **PlatformIO: Upload** step does not work for factory-fresh XIAO nrf52840 (the automatic reset to bootloader only works if Meshtastic firmware is already running)
-6. The built `firmware.uf2` binary can be found in the folder `.pio/build/xiao_ble/firmware.uf2` (relative to where you cloned the Git repository to), we will need it for [flashing the firmware](#3-flash-the-firmware-to-the-xiao-nrf52840) (manually)
+<strong>E22 -> E22 connections:</strong> (none)

-## 3. Flash the Firmware to the XIAO nrf52840
+&nbsp;

-1. Double press the XIAO nrf52840's `reset` button to put it in bootloader mode, and a USB volume named `XIAO SENSE` will appear
-2. Copy the `firmware.uf2` file to the `XIAO SENSE` volume (refer to the last step of [Build Meshtastic](#2-build-meshtastic))
-3. The XIAO nrf52840's red LED will flash for several seconds as the firmware is copied
-4. Once Meshtastic firmware succesfully boots, the:
-   1. Green LED will turn on
-   2. Red LED will flash several times to indicate flash memory writes during initial settings file creation
-   3. Green LED will blink every second once the firmware is running normally
-5. If you do not see the above LED patters, proceed to [Troubleshooting](#4-troubleshooting)
+## 5. Flash the firmware to the Xiao BLE

-## 4. Troubleshooting
+1. Double press the Xiao's `reset` button to put it in bootloader mode.
+2. In a terminal window, navigate to the Meshtastic firmware repo's root directory, and from there to `.pio/build/xiao_ble`.
+3. Convert the generated `.hex` file into a `.uf2` file:
+
+   ```bash
+   ../../../bin/uf2conv.py firmware.hex -c -o firmware.uf2 -f 0xADA52840
+   ```
+
+4. Copy the new `.uf2` file to the Xiao's mass storage volume:
+
+   ```bash
+   cp firmware.uf2 /Volumes/XIAO-BOOT
+   ```
+
+5. The Xiao's red LED will flash for several seconds as the firmware is copied.
+6. Once the firmware is copied, to verify it is running, run the following command:
+
+   ```bash
+   meshtastic --noproto
+   ```
+
+7. Then, press the Xiao's `reset` button again. You should see a lot of debug output logged in the terminal window.
+
+&nbsp;
+
+## 6. Troubleshooting
+
+- If after flashing Meshtastic, the Xiao is bootlooped, look at the serial output (you can see this by running `meshtastic --noproto` with the device connected to your computer via USB).

- If after flashing Meshtastic, the XIAO is bootlooped, look at the serial output (you can see this by running `meshtastic --noproto` with the device connected to your computer via USB).
  - If you see that the SX1262 init result was -2, this likely indicates a wiring problem; double check your wiring and pin mapping in `variant.h`.
-  - If you see an error mentioning tinyFS, this may mean you need to reformat the XIAO's storage:
-    1. Open the [Meshtastic web flasher](https://flasher.meshtastic.org/)
-    2. Select the **_Seeed XIAO NRF52840 Kit_**
-    3. Click the **_trash can icon_** to the right of **_Flash_**
-    4. Follow the instructions on the screen
-       **Do not flash the Seeed XIAO NRF52840 Kit firmware** if you have wired the LoRa module according to this variant, as the Seeed XIAO NRF52840 Kit uses different wiring for the SX1262 LoRa chip
+
+  - If you see an error mentioning tinyFS, this may mean you need to reformat the Xiao's storage:
+
+    1. Double press the `reset` button to put the Xiao in bootloader mode.
+
+    2. In a terminal window, navigate to the Meshtastic firmware repo's root directory, and from there to `variants/xiao_ble`.
+
+    3. Run the following command: &nbsp;`cp xiao-ble-internal-format.uf2 /Volumes/XIAO-BOOT`
+
+    4. The Xiao's red LED will flash briefly as the filesystem format firmware is copied.
+
+    5. Run the following command: &nbsp;`meshtastic --noproto`
+
+    6. In the output of the above command, you should see a message saying "Formatting...done".
+
+    7. To flash Meshtastic again, repeat the steps in section 5 above.
+
  - If you don't see any specific error message, but the boot process is stuck or not proceeding as expected, this might also mean there is a conflict in `variant.h`. If you have made any changes to the pin mapping, ensure they do not result in a conflict. If all else fails, try reverting your changes and using the known-good configuration included here.
+
  - The above might also mean something is wired incorrectly. Try reverting to one of the known-good example wirings in section 4.
+
 - If the E22 gets hot to the touch:
-  - The power amplifier is likely running continually. Disconnect it and the XIAO from power immediately, and double check wiring and pin mapping. In my experimentation this occurred in cases where TXEN was inadvertenly high (usually due to a pin mapping conflict).
+  - The power amplifier is likely running continually. Disconnect it and the Xiao from power immediately, and double check wiring and pin mapping. In my experimentation this occurred in cases where TXEN was inadvertenly high (usually due to a pin mapping conflict).

-## 5. Notes
+&nbsp;

- **Transmit Power**
-  - There is a power amplifier after the SX1262's Tx, so the actual Tx power is just over 7 dB greater than the SX1262's set Tx power (the E22-900M30S actually tops out just over 29dB at 5V according to the datasheet)
-  - Meshtastic firmware is aware of the gain of the E22-900M30S module, so the Meshtastic clients' Tx power setting reflects the actual output power, i.e. setting 30 dBm in the Meshtastic app programs the E22 module to correctly output 30 dBm, setting 24 dBm will output 24 dBm, etc.
- **Adequate 5V Power Supply to the E22 Module**
-  - Have a bypass capacitor from its 5V supply to ground; 100 µF works well
-  - Voltage must be between 5V–5.5V, lower supply voltage results in less output power; for example, with a fully charged LiPo at 4.2V, Tx power appears to max out around 26-27 dBm
+## 7. Notes

-### Additional Reading
+- There are several anecdotal recommendations regarding the Tx power the E22's internal SX1262 should be set to in order to achieve the advertised output of 30 dBm, ranging from 4 (per <a href="https://github.com/jgromes/RadioLib/wiki/High-power-Radio-Modules-Guide">this article</a> in the RadioLib github repo) to 22 (per <a href="https://discord.com/channels/867578229534359593/871539930852130866/976472577545490482">this conversation</a> from the Meshtastic Discord). When paired with the Xiao BLE in the configurations described above, I observed that the output is at its maximum when Tx power is set to 22.

- [S5NC/CDEBYTE_Modules](https://github.com/S5NC/CDEBYTE_Modules) has additional information about EBYTE E22 modules' internal workings, including photographs
- [RadioLib High power Radio Modules Guide](https://github.com/jgromes/RadioLib/wiki/High-power-Radio-Modules-Guide)
+- To achieve its full output, the E22 should have a bypass capacitor from its 5V supply to ground. 100 µF works well.

-## 6. Testing Methodology
+- The E22 will happily run on voltages lower than 5V, but the full output power will not be realized. For example, with a fully charged LiPo at 4.2V, Tx power appears to max out around 26-27 dBm.
+
+&nbsp;
+
+## 8. Testing Methodology

 During what became a fairly long trial-and-error process, I did a lot of careful testing of Tx power and Rx sensitivity. My methodology in these tests was as follows:

 - All tests were conducted between two nodes:
-  1. The XIAO nrf52840 + E22 coupled with an [Abracon ARRKP4065-S915A](https://www.digikey.com/en/products/detail/abracon-llc/ARRKP4065-S915A/8593263") ceramic patch antenna
-  2. A RAK 5005/4631 coupled with a [Laird MA9-5N](https://www.streakwave.com/laird-technologies-ma9-5n-55dbi-900mhz-mobile-omni-select-mount) antenna via a 4" U.FL to Type N pigtail.
+
+  1. The Xiao BLE + E22 coupled with an <a href="https://www.digikey.com/en/products/detail/abracon-llc/ARRKP4065-S915A/8593263">Abracon ARRKP4065-S915A</a> ceramic patch antenna
+
+  2. A RAK 5005/4631 coupled with a <a href="https://www.streakwave.com/laird-technologies-ma9-5n-55dbi-900mhz-mobile-omni-select-mount">Laird MA9-5N</a> antenna via a 4" U.FL to Type N pigtail.
+
  - No other nodes were powered up onsite or nearby.
+
+    <br>
+
 - Each node and its antenna was kept in exactly the same position and orientation throughout testing.
+
 - Other environmental factors (e.g. the location and resting position of my body in the room while testing) were controlled as carefully as possible.
+
 - Each test comprised at least five (and often ten) runs, after which the results were averaged.
+
 - All testing was done by sending single-character messages between nodes and observing the received RSSI reported in the message acknowledgement. Messages were sent one by one, waiting for each to be acknowledged or time out before sending the next.
- The E22's Tx power was observed by sending messages from the RAK to the XIAO nrf52840 + E22 and recording the received RSSI.
- The opposite was done to observe the E22's Rx sensitivity: messages were sent from the XIAO nrf52840 + E22 to the RAK, and the received RSSI was recorded.
-  While this cannot match the level of accuracy achievable with actual test equipment in a lab setting, it was nonetheless sufficient to demonstrate the (sometimes very large) differences in Tx power and Rx sensitivity between various configurations.
+
+- The E22's Tx power was observed by sending messages from the RAK to the Xiao BLE + E22 and recording the received RSSI.
+
+- The opposite was done to observe the E22's Rx sensitivity: messages were sent from the Xiao BLE + E22 to the RAK, and the received RSSI was recorded.
+
+While this cannot match the level of accuracy achievable with actual test equipment in a lab setting, it was nonetheless sufficient to demonstrate the (sometimes very large) differences in Tx power and Rx sensitivity between various configurations.
--- a/variants/heltec_vision_master_e213/einkDetect.h
+++ b/variants/heltec_vision_master_e213/einkDetect.h
@@ -1,35 +0,0 @@
-#pragma once
-
-#include "configuration.h"
-
-enum class EInkDetectionResult : uint8_t {
-    LCMEN213EFC1 = 0, // Initial version
-    E0213A367 = 1,    // E213 PCB marked V1.1 (Mid 2025)
-};
-
-EInkDetectionResult detectEInk()
-{
-    // Test 1: Logic of BUSY pin
-
-    // Determines controller IC manufacturer
-    // Fitipower: busy when LOW
-    // Solomon Systech: busy when HIGH
-
-    // Force display BUSY by holding reset pin active
-    pinMode(PIN_EINK_RES, OUTPUT);
-    digitalWrite(PIN_EINK_RES, LOW);
-
-    delay(10);
-
-    // Read whether pin is HIGH or LOW while busy
-    pinMode(PIN_EINK_BUSY, INPUT);
-    bool busyLogic = digitalRead(PIN_EINK_BUSY);
-
-    // Test complete. Release pin
-    pinMode(PIN_EINK_RES, INPUT);
-
-    if (busyLogic == LOW)
-        return EInkDetectionResult::LCMEN213EFC1;
-    else // busy HIGH
-        return EInkDetectionResult::E0213A367;
-}
--- a/variants/heltec_vision_master_e213/nicheGraphics.h
+++ b/variants/heltec_vision_master_e213/nicheGraphics.h
@@ -18,22 +18,16 @@

 // Shared NicheGraphics components
 // --------------------------------
-#include "graphics/niche/Drivers/EInk/E0213A367.h"
 #include "graphics/niche/Drivers/EInk/LCMEN2R13EFC1.h"
 #include "graphics/niche/Inputs/TwoButton.h"

-#include "buzz.h"       // Button feedback
-#include "einkDetect.h" // Detect display model at runtime
+// Button feedback
+#include "buzz.h"

 void setupNicheGraphics()
 {
    using namespace NicheGraphics;

-    // Detect E-Ink Model
-    // -------------------
-
-    EInkDetectionResult displayModel = detectEInk();
-
    // SPI
    // -----------------------------

@@ -44,13 +38,7 @@ void setupNicheGraphics()
    // E-Ink Driver
    // -----------------------------

-    Drivers::EInk *driver;
-
-    if (displayModel == EInkDetectionResult::LCMEN213EFC1) // V1 (unmarked)
-        driver = new Drivers::LCMEN213EFC1;
-    else if (displayModel == EInkDetectionResult::E0213A367) // V1.1
-        driver = new Drivers::E0213A367;
-
+    Drivers::EInk *driver = new Drivers::LCMEN213EFC1;
    driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);

    // InkHUD
@@ -63,11 +51,7 @@ void setupNicheGraphics()

    // Set how many FAST updates per FULL update
    // Set how unhealthy additional FAST updates beyond this number are
-
-    if (displayModel == EInkDetectionResult::LCMEN213EFC1) // V1 (unmarked)
-        inkhud->setDisplayResilience(10, 1.5);
-    else if (displayModel == EInkDetectionResult::E0213A367) // V1.1
-        inkhud->setDisplayResilience(15, 3);
+    inkhud->setDisplayResilience(10, 1.5);

    // Select fonts
    InkHUD::Applet::fontLarge = FREESANS_12PT_WIN1252;
@@ -107,7 +91,7 @@ void setupNicheGraphics()
    buttons->setWiring(1, PIN_BUTTON2);
    buttons->setHandlerShortPress(1, [inkhud]() {
        inkhud->nextTile();
-        playChirp();
+        playBoop();
    });

    // Begin handling button events
--- a/variants/heltec_vision_master_e213/platformio.ini
+++ b/variants/heltec_vision_master_e213/platformio.ini
@@ -7,8 +7,7 @@ build_flags =
  -Ivariants/heltec_vision_master_e213 
  -DHELTEC_VISION_MASTER_E213
  -DUSE_EINK
-  -DGXEPD2_DRIVER_0=GxEPD2_213_FC1
-  -DGXEPD2_DRIVER_1=GxEPD2_213_E0213A367
+  -DEINK_DISPLAY_MODEL=GxEPD2_213_FC1
  -DEINK_WIDTH=250
  -DEINK_HEIGHT=122
  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
@@ -17,7 +16,7 @@ build_flags =
  -DEINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

--- a/variants/heltec_vision_master_e290/nicheGraphics.h
+++ b/variants/heltec_vision_master_e290/nicheGraphics.h
@@ -104,7 +104,7 @@ void setupNicheGraphics()
    buttons->setWiring(1, PIN_BUTTON2);
    buttons->setHandlerShortPress(1, [inkhud]() {
        inkhud->nextTile();
-        playChirp();
+        playBoop();
    });

    // Begin handling button events
--- a/variants/heltec_wireless_paper/einkDetect.h
+++ b/variants/heltec_wireless_paper/einkDetect.h
@@ -1,35 +0,0 @@
-#pragma once
-
-#include "configuration.h"
-
-enum class EInkDetectionResult : uint8_t {
-    LCMEN213EFC1 = 0, // V1.1
-    E0213A367 = 1,    // V1.1.1, V1.2
-};
-
-EInkDetectionResult detectEInk()
-{
-    // Test 1: Logic of BUSY pin
-
-    // Determines controller IC manufacturer
-    // Fitipower: busy when LOW
-    // Solomon Systech: busy when HIGH
-
-    // Force display BUSY by holding reset pin active
-    pinMode(PIN_EINK_RES, OUTPUT);
-    digitalWrite(PIN_EINK_RES, LOW);
-
-    delay(10);
-
-    // Read whether pin is HIGH or LOW while busy
-    pinMode(PIN_EINK_BUSY, INPUT);
-    bool busyLogic = digitalRead(PIN_EINK_BUSY);
-
-    // Test complete. Release pin
-    pinMode(PIN_EINK_RES, INPUT);
-
-    if (busyLogic == LOW)
-        return EInkDetectionResult::LCMEN213EFC1;
-    else // busy HIGH
-        return EInkDetectionResult::E0213A367;
-}
--- a/variants/heltec_wireless_paper/nicheGraphics.h
+++ b/variants/heltec_wireless_paper/nicheGraphics.h
@@ -18,21 +18,13 @@

 // Shared NicheGraphics components
 // --------------------------------
-#include "graphics/niche/Drivers/EInk/E0213A367.h"
 #include "graphics/niche/Drivers/EInk/LCMEN2R13EFC1.h"
 #include "graphics/niche/Inputs/TwoButton.h"

-#include "einkDetect.h" // Detect display model at runtime
-
 void setupNicheGraphics()
 {
    using namespace NicheGraphics;

-    // Detect E-Ink Model
-    // -------------------
-
-    EInkDetectionResult displayModel = detectEInk();
-
    // SPI
    // -----------------------------

@@ -43,13 +35,7 @@ void setupNicheGraphics()
    // E-Ink Driver
    // -----------------------------

-    Drivers::EInk *driver;
-
-    if (displayModel == EInkDetectionResult::LCMEN213EFC1) // V1.1
-        driver = new Drivers::LCMEN213EFC1;
-    else if (displayModel == EInkDetectionResult::E0213A367) // V1.1.1, V1.2
-        driver = new Drivers::E0213A367;
-
+    Drivers::EInk *driver = new Drivers::LCMEN213EFC1;
    driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);

    // InkHUD
@@ -62,11 +48,7 @@ void setupNicheGraphics()

    // Set how many FAST updates per FULL update
    // Set how unhealthy additional FAST updates beyond this number are
-
-    if (displayModel == EInkDetectionResult::LCMEN213EFC1) // V1.1 (unmarked)
-        inkhud->setDisplayResilience(10, 1.5);
-    else if (displayModel == EInkDetectionResult::E0213A367) // V1.1.1, V1.2
-        inkhud->setDisplayResilience(15, 3);
+    inkhud->setDisplayResilience(10, 1.5);

    // Select fonts
    InkHUD::Applet::fontLarge = FREESANS_12PT_WIN1252;
--- a/variants/heltec_wireless_paper/platformio.ini
+++ b/variants/heltec_wireless_paper/platformio.ini
@@ -7,8 +7,7 @@ build_flags =
  ${esp32s3_base.build_flags} 
  -I variants/heltec_wireless_paper
  -D HELTEC_WIRELESS_PAPER 
-  -D GXEPD2_DRIVER_0=GxEPD2_213_FC1
-  -D GXEPD2_DRIVER_1=GxEPD2_213_E0213A367
+  -D EINK_DISPLAY_MODEL=GxEPD2_213_FC1
  -D EINK_WIDTH=250
  -D EINK_HEIGHT=122
  -D USE_EINK
@@ -18,7 +17,7 @@ build_flags =
  -D EINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

--- a/variants/radiomaster_900_bandit/variant.h
+++ b/variants/radiomaster_900_bandit/variant.h
@@ -46,8 +46,7 @@
  FAN is active at 250mW on it's ExpressLRS Firmware.
  This FAN has TACHO signal on Pin 27 for use with PWM.
 */
-#define RADIO_FAN_EN 2
-#define RADIO_FAN_PWM
+#define RF95_FAN_EN 2

 /*
  LED PIN setup and it has a NeoPixel LED.
--- a/variants/radiomaster_900_bandit_nano/variant.h
+++ b/variants/radiomaster_900_bandit_nano/variant.h
@@ -32,7 +32,7 @@
  This unit has a FAN built-in.
  FAN is active at 250mW on it's ExpressLRS Firmware.
 */
-#define RADIO_FAN_EN 2
+#define RF95_FAN_EN 2

 /*
  LED PIN setup.
--- a/variants/radiomaster_nomad_gemini/platformio.ini
+++ b/variants/radiomaster_nomad_gemini/platformio.ini
@@ -1,20 +0,0 @@
-[env:radiomaster_nomad_gemini]
-extends = esp32_base
-board = esp32doit-devkit-v1
-build_flags =
-  ${esp32_base.build_flags}
-  -DRADIOMASTER_NOMAD_GEMINI
-  -DPRIVATE_HW
-  -DVTABLES_IN_FLASH=1
-  -DCONFIG_DISABLE_HAL_LOCKS=1
-  -O2
-  -Ivariants/radiomaster_nomad_gemini
-  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
-  -DMESHTASTIC_EXCLUDE_I2C=1
-  -DRADIOLIB_EXCLUDE_SX128X=1
-  -DRADIOLIB_EXCLUDE_SX127X=1
-  -DRADIOLIB_EXCLUDE_SX126X=1
-board_build.f_cpu = 240000000L
-upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/radiomaster_nomad_gemini/rfswitch.h
+++ b/variants/radiomaster_nomad_gemini/rfswitch.h
@@ -1,56 +0,0 @@
-#include "RadioLib.h"
-
-static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7,
-                                             RADIOLIB_LR11X0_DIO8, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[] = {
-    // mode                  DIO5  DIO6 DIO7 DIO8
-    {LR11x0::MODE_STBY, {LOW, LOW, LOW, LOW}},   {LR11x0::MODE_RX, {LOW, LOW, HIGH, LOW}},
-    {LR11x0::MODE_TX, {LOW, LOW, LOW, HIGH}},    {LR11x0::MODE_TX_HP, {LOW, LOW, LOW, HIGH}},
-    {LR11x0::MODE_TX_HF, {LOW, HIGH, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, LOW, LOW}},
-    {LR11x0::MODE_WIFI, {HIGH, LOW, LOW, LOW}},  END_OF_MODE_TABLE,
-};
-
-/*
-
-DIO5: RXEN 2.4GHz
-DIO6: TXEN 2.4GHz
-DIO7: RXEN 900MHz
-DIO8: TXEN 900MHz
-
-
-  "radio_dcdc": true,
-  "radio_rfo_hf": true,
-
-    "power_apc2": 26,
-    "power_min": 0,
-    "power_high": 6,
-    "power_max": 6,
-    "power_default": 3,
-    "power_control": 3, POWER_OUTPUT_DACWRITE // use internal dacWrite function to set value on GPIO_PIN_RFamp_APC2
-                         [0,   1,   2,   3,   4,   5,   6 ] // 0-6
-    "power_values":      [120, 120, 120, 120, 120, 120, 95] // DAC Value
-    "power_values2":     [-17, -16, -14, -11, -7,  -3,  5 ] // 900M
-    "power_values_dual": [-18, -14,  -8,  -6, -2,   3,  5 ] // 2.4G
-
-    // default value 0 means direct!
-#define POWER_OUTPUT_DACWRITE (hardware_int(HARDWARE_power_control)==3)
-#define POWER_OUTPUT_VALUES hardware_i16_array(HARDWARE_power_values)
-#define POWER_OUTPUT_VALUES_COUNT hardware_int(HARDWARE_power_values_count)
-#define POWER_OUTPUT_VALUES2 hardware_i16_array(HARDWARE_power_values2)
-#define POWER_OUTPUT_VALUES_DUAL hardware_i16_array(HARDWARE_power_values_dual)
-#define POWER_OUTPUT_VALUES_DUAL_COUNT hardware_int(HARDWARE_power_values_dual_count)
-
-#define GPIO_PIN_FAN_EN hardware_pin(HARDWARE_misc_fan_en)
-
-    case PWR_10mW: return 10;
-    case PWR_25mW: return 14;
-    case PWR_50mW: return 17;
-    case PWR_100mW: return 20;
-    case PWR_250mW: return 24;
-    case PWR_500mW: return 27;
-    case PWR_1000mW: return 30;
-
-    95 -> +25dBm
-    120 -> +24dBm
-*/
--- a/variants/radiomaster_nomad_gemini/variant.h
+++ b/variants/radiomaster_nomad_gemini/variant.h
@@ -1,60 +0,0 @@
-#define HAS_SCREEN 0
-#define HAS_WIRE 0
-#define HAS_GPS 0
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
-
-#define PIN_SPI_MISO 33
-#define PIN_SPI_MOSI 32
-#define PIN_SPI_SCK 25
-#define PIN_SPI_NSS 27
-
-#define LORA_RESET 15
-#define LORA_DIO1 37
-#define LORA_DIO2 36
-#define LORA_SCK PIN_SPI_SCK
-#define LORA_MISO PIN_SPI_MISO
-#define LORA_MOSI PIN_SPI_MOSI
-#define LORA_CS PIN_SPI_NSS
-
-// supported modules list
-#define USE_LR1121
-
-#define LR1121_IRQ_PIN LORA_DIO1
-#define LR1121_NRESET_PIN LORA_RESET
-#define LR1121_BUSY_PIN LORA_DIO2
-#define LR1121_SPI_NSS_PIN LORA_CS
-#define LR1121_SPI_SCK_PIN LORA_SCK
-#define LR1121_SPI_MOSI_PIN LORA_MOSI
-#define LR1121_SPI_MISO_PIN LORA_MISO
-
-// this is correct and sets the cap for the Sub-GHz part
-#define LR1110_MAX_POWER 5
-// 2.4G Part
-#define LR1120_MAX_POWER 5
-
-#define POWER_SHIFT -20
-
-// not yet implemented
-#define JANUS_RADIO
-#define LR1121_IRQ2_PIN 34
-#define LR1121_NRESET2_PIN 21
-#define LR1121_BUSY2_PIN 39
-#define LR1121_SPI_NSS2_PIN 13
-
-// TODO: check if this is correct
-// #define LR11X0_DIO3_TCXO_VOLTAGE 1.6
-#define LR11X0_DIO_AS_RF_SWITCH
-
-#define HAS_NEOPIXEL                         // Enable the use of neopixels
-#define NEOPIXEL_COUNT 2                     // How many neopixels are connected
-#define NEOPIXEL_DATA 22                     // GPIO pin used to send data to the neopixels
-#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // Type of neopixels in use
-#define ENABLE_AMBIENTLIGHTING               // Turn on Ambient Lighting
-
-#define BUTTON_PIN 34
-#define BUTTON_NEED_PULLUP
-
-#undef EXT_NOTIFY_OUT
-
-#define RADIO_FAN_EN 2
--- a/variants/seeed_xiao_nrf52840_kit/platformio.ini
+++ b/variants/seeed_xiao_nrf52840_kit/platformio.ini
@@ -1,4 +1,4 @@
-; Seeed Xiao BLE: https://wiki.seeedstudio.com/XIAO_BLE/
+; Seeed Xiao BLE: https://www.digikey.com/en/products/detail/seeed-technology-co-ltd/102010448/16652893
 [env:seeed_xiao_nrf52840_kit]
 extends = nrf52840_base
 board = xiao_ble_sense
--- a/variants/t-deck/variant.h
+++ b/variants/t-deck/variant.h
@@ -68,7 +68,6 @@
 #define TB_LEFT 1
 #define TB_RIGHT 2
 #define TB_PRESS 0 // BUTTON_PIN
-#define TB_DIRECTION FALLING

 // microphone
 #define ES7210_SCK 47
--- a/version.properties
+++ b/version.properties
@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 7
-build = 3
+build = 2