Merge branch 'master' into static-buffer-gps

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

.github/actions/setup-base/action.yml

@@ -23,7 +23,7 @@ runs:
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
 
     - name: Setup Python
-      uses: actions/setup-python@v5
+      uses: actions/setup-python@v6
       with:
         python-version: 3.x
         cache: pip

.github/workflows/main_matrix.yml

@@ -43,7 +43,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - uses: actions/checkout@v5
-      - uses: actions/setup-python@v5
+      - uses: actions/setup-python@v6
         with:
           python-version: 3.x
           cache: pip
@@ -293,7 +293,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -322,7 +322,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -370,7 +370,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
@@ -386,14 +386,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -439,11 +439,11 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -460,7 +460,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -494,11 +494,11 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/package_obs.yml

@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -31,7 +31,7 @@ jobs:
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 

.github/workflows/package_ppa.yml

@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -13,7 +13,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Check for PR labels
-        uses: actions/github-script@v7
+        uses: actions/github-script@v8
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);

.github/workflows/pr_tests.yml

@@ -0,0 +1,238 @@
+name: Tests
+
+# DISABLED: Changed from automatic PR triggers to manual only
+on:
+  workflow_dispatch:
+    inputs:
+      reason:
+        description: "Reason for manual test run"
+        required: false
+        default: "Manual test execution"
+
+concurrency:
+  group: tests-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+permissions:
+  contents: read
+  actions: read
+  checks: write
+  pull-requests: write
+
+jobs:
+  native-tests:
+    name: "🧪 Native Tests"
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/test_native.yml
+    permissions:
+      contents: read
+      actions: read
+      checks: write
+
+  test-summary:
+    name: "📊 Test Results"
+    runs-on: ubuntu-latest
+    needs: [native-tests]
+    if: always()
+    permissions:
+      contents: read
+      actions: read
+      checks: write
+      pull-requests: write
+    steps:
+      - uses: actions/checkout@v5
+        with:
+          submodules: recursive
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download test artifacts
+        if: needs.native-tests.result != 'skipped'
+        uses: actions/download-artifact@v5
+        with:
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
+          merge-multiple: true
+
+      - name: Parse test results and create detailed summary
+        id: test-results
+        run: |
+          echo "## 🧪 Test Results Summary" >> $GITHUB_STEP_SUMMARY
+          echo "" >> $GITHUB_STEP_SUMMARY
+
+          # Check overall job status first
+          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
+            echo "✅ **Overall Status**: PASSED" >> $GITHUB_STEP_SUMMARY
+          elif [[ "${{ needs.native-tests.result }}" == "failure" ]]; then
+            echo "❌ **Overall Status**: FAILED" >> $GITHUB_STEP_SUMMARY
+          elif [[ "${{ needs.native-tests.result }}" == "cancelled" ]]; then
+            echo "⏸️ **Overall Status**: CANCELLED" >> $GITHUB_STEP_SUMMARY
+            echo "" >> $GITHUB_STEP_SUMMARY
+            echo "Tests were cancelled before completion." >> $GITHUB_STEP_SUMMARY
+            exit 0
+          else
+            echo "⚠️ **Overall Status**: SKIPPED" >> $GITHUB_STEP_SUMMARY
+            echo "" >> $GITHUB_STEP_SUMMARY
+            echo "Tests were skipped." >> $GITHUB_STEP_SUMMARY
+            exit 0
+          fi
+
+          echo "" >> $GITHUB_STEP_SUMMARY
+
+          # Parse detailed test results if available
+          if [ -f "testreport.xml" ]; then
+            echo "### 🔍 Individual Test Results" >> $GITHUB_STEP_SUMMARY
+            echo "" >> $GITHUB_STEP_SUMMARY
+            
+            python3 << 'EOF'
+          import xml.etree.ElementTree as ET
+          import os
+
+          try:
+              tree = ET.parse('testreport.xml')
+              root = tree.getroot()
+              
+              total_tests = 0
+              passed_tests = 0
+              failed_tests = 0
+              skipped_tests = 0
+              
+              # Parse testsuite elements
+              for testsuite in root.findall('.//testsuite'):
+                  suite_name = testsuite.get('name', 'Unknown')
+                  suite_tests = int(testsuite.get('tests', '0'))
+                  suite_failures = int(testsuite.get('failures', '0'))
+                  suite_errors = int(testsuite.get('errors', '0'))
+                  suite_skipped = int(testsuite.get('skipped', '0'))
+                  
+                  total_tests += suite_tests
+                  failed_tests += suite_failures + suite_errors
+                  skipped_tests += suite_skipped
+                  passed_tests += suite_tests - suite_failures - suite_errors - suite_skipped
+                  
+                  if suite_tests > 0:
+                      status = "✅" if (suite_failures + suite_errors) == 0 else "❌"
+                      print(f"**{status} Test Suite: {suite_name}**")
+                      print(f"- Total: {suite_tests}")
+                      print(f"- Passed: ✅ {suite_tests - suite_failures - suite_errors - suite_skipped}")
+                      print(f"- Failed: ❌ {suite_failures + suite_errors}")
+                      if suite_skipped > 0:
+                          print(f"- Skipped: ⏭️ {suite_skipped}")
+                      print("")
+                      
+                      # Show individual test results for failed suites
+                      if suite_failures + suite_errors > 0:
+                          print("**Failed Tests:**")
+                          for testcase in testsuite.findall('testcase'):
+                              test_name = testcase.get('name', 'Unknown')
+                              failure = testcase.find('failure')
+                              error = testcase.find('error')
+                              
+                              if failure is not None:
+                                  msg = failure.get('message', 'Unknown error')[:100]
+                                  print(f"- ❌ `{test_name}`: {msg}")
+                              elif error is not None:
+                                  msg = error.get('message', 'Unknown error')[:100]
+                                  print(f"- ❌ `{test_name}`: ERROR - {msg}")
+                          print("")
+                      else:
+                          # Show passed tests for successful suites
+                          passed_count = 0
+                          for testcase in testsuite.findall('testcase'):
+                              if testcase.find('failure') is None and testcase.find('error') is None:
+                                  if passed_count < 5:  # Limit to first 5 to avoid spam
+                                      test_name = testcase.get('name', 'Unknown')
+                                      print(f"- ✅ `{test_name}`: PASSED")
+                                  passed_count += 1
+                          if passed_count > 5:
+                              print(f"- ... and {passed_count - 5} more tests passed")
+                          print("")
+              
+              # Summary statistics
+              print("### 📊 Test Statistics")
+              print(f"- **Total Tests**: {total_tests}")
+              print(f"- **Passed**: ✅ {passed_tests}")
+              print(f"- **Failed**: ❌ {failed_tests}")
+              if skipped_tests > 0:
+                  print(f"- **Skipped**: ⏭️ {skipped_tests}")
+              
+              if failed_tests > 0:
+                  print(f"\n❌ **{failed_tests} tests failed out of {total_tests} total**")
+              else:
+                  print(f"\n✅ **All {total_tests} tests passed!**")
+                  
+          except Exception as e:
+              print(f"❌ Error parsing test results: {e}")
+          EOF
+          else
+            echo "⚠️ **No detailed test report available**" >> $GITHUB_STEP_SUMMARY
+            echo "" >> $GITHUB_STEP_SUMMARY
+            echo "Test artifacts may not have been generated properly." >> $GITHUB_STEP_SUMMARY
+          fi
+
+          echo "" >> $GITHUB_STEP_SUMMARY
+          echo "---" >> $GITHUB_STEP_SUMMARY
+          echo "View detailed logs in the [Actions tab](${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }})" >> $GITHUB_STEP_SUMMARY
+
+      - name: Comment test results on PR
+        if: github.event_name == 'pull_request' && needs.native-tests.result != 'skipped'
+        uses: actions/github-script@v8
+        with:
+          script: |
+            const fs = require('fs');
+
+            // Read the step summary to use as PR comment
+            let testSummary = "## 🧪 Test Results Summary\n\n";
+
+            if ("${{ needs.native-tests.result }}" === "success") {
+              testSummary += "✅ **All tests passed!**\n\n";
+            } else if ("${{ needs.native-tests.result }}" === "failure") {
+              testSummary += "❌ **Some tests failed.**\n\n";
+            } else {
+              testSummary += "⚠️ **Tests did not complete normally.**\n\n";
+            }
+
+            testSummary += `View detailed results: [Actions Run](${context.payload.repository.html_url}/actions/runs/${context.runId})\n\n`;
+            testSummary += "---\n";
+            testSummary += "*This comment will be automatically updated when new commits are pushed.*";
+
+            // Find existing comment
+            const comments = await github.rest.issues.listComments({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number
+            });
+
+            const botComment = comments.data.find(comment => 
+              comment.user.type === 'Bot' && 
+              comment.body.includes('🧪 Test Results Summary')
+            );
+
+            if (botComment) {
+              // Update existing comment
+              await github.rest.issues.updateComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                comment_id: botComment.id,
+                body: testSummary
+              });
+            } else {
+              // Create new comment
+              await github.rest.issues.createComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: context.issue.number,
+                body: testSummary
+              });
+            }
+
+      - name: Set overall status
+        run: |
+          if [[ "${{ needs.native-tests.result }}" == "success" ]]; then
+            echo "All tests passed! ✅"
+            exit 0
+          else
+            echo "Some tests failed! ❌"
+            exit 1
+          fi

.github/workflows/release_channels.yml

@@ -63,7 +63,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Setup Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v6
         with:
           python-version: 3.x
 

.github/workflows/stale_bot.yml

@@ -17,7 +17,7 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v9.1.0
+        uses: actions/stale@v10.0.0
         with:
           days-before-stale: 45
           exempt-issue-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -137,7 +137,7 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
@@ -150,7 +150,7 @@ jobs:
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@v5
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -47,7 +47,7 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v4
+        uses: actions/setup-node@v5
         with:
           node-version: 22
 

.github/workflows/trunk_format_pr.yml

@@ -39,7 +39,7 @@ jobs:
           git push
 
       - name: Comment on PR
-        uses: actions/github-script@v7
+        uses: actions/github-script@v8
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.trunk/trunk.yaml

@@ -1,31 +1,31 @@
 version: 0.1
 cli:
-  version: 1.24.0
+  version: 1.25.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.1
+      ref: v1.7.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.451
-    - renovate@41.40.0
+    - checkov@3.2.469
+    - renovate@41.94.0
     - prettier@3.6.2
-    - trufflehog@3.90.1
+    - trufflehog@3.90.5
     - yamllint@1.37.1
     - bandit@1.8.6
-    - trivy@0.64.1
-    - taplo@0.9.3
-    - ruff@0.12.4
+    - trivy@0.66.0
+    - taplo@0.10.0
+    - ruff@0.12.11
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
     - actionlint@1.7.7
     - flake8@7.3.0
-    - hadolint@2.12.1-beta
+    - hadolint@2.13.1
     - shfmt@3.6.0
-    - shellcheck@0.10.0
+    - shellcheck@0.11.0
     - black@25.1.0
     - git-diff-check
     - gitleaks@8.28.0

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-bookworm AS builder
+FROM python:3.13-slim-trixie AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -36,7 +36,7 @@ RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/fir
 
 ##### PRODUCTION BUILD #############
 
-FROM debian:bookworm-slim
+FROM debian:trixie-slim
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
       org.opencontainers.image.url="https://meshtastic.org" \
@@ -51,8 +51,8 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
-        liborcania2.3 libulfius2.7 libssl3 \
+        libc-bin libc6 libgpiod3 libyaml-cpp0.8 libi2c0 libuv1t64 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7t64 libssl3t64 \
         libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
@@ -61,7 +61,7 @@ RUN apt-get update && apt-get --no-install-recommends -y install \
 
 # Fetch compiled binary from the builder
 COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
-COPY --from=builder /tmp/web /usr/share/meshtasticd/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/web/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 

arch/nrf52/nrf52.ini

@@ -23,7 +23,7 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/6cb7a455b440dd0738e8ed74a18136ed5cf7ea63.zip
+  https://github.com/meshtastic/platform-native/archive/c490bcd019e0658404088a61b96e653c9da22c45.zip
 framework = arduino
 
 build_src_filter = 
@@ -17,7 +17,6 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
-  +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
@@ -32,9 +31,12 @@ lib_deps =
   https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
+  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
+  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
 
 build_flags =
   ${arduino_base.build_flags}
+  -D ARCH_PORTDUINO
   -fPIC
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED

arch/stm32/stm32.ini

@@ -50,7 +50,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
 
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
+  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
 
 lib_ignore =
   OneButton

bin/config.d/lora-RAK6421-13300-slot1.yaml

@@ -9,13 +9,4 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
-  # CS: 8
-
-
-  ### RAK13300in Slot 2 pins
-#  IRQ: 18 #IO6
-#  Reset: 24 # IO4
-#  Busy: 19 # IO5
-#  # Ant_sw: 23 # IO3 
-#  spidev: spidev0.1
-#  # CS: 7
+  # CS: 8

bin/config.d/lora-RAK6421-13300-slot2.yaml

@@ -0,0 +1,8 @@
+Lora:
+  ### RAK13300in Slot 2 pins
+  IRQ: 18 #IO6
+  Reset: 24 # IO4
+  Busy: 19 # IO5
+  # Ant_sw: 23 # IO3 
+  spidev: spidev0.1
+  # CS: 7

bin/device-install.bat

@@ -7,6 +7,7 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
+SET "MUIDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
@@ -14,11 +15,12 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
+SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
 
 GOTO getopts
 :help
@@ -100,7 +102,6 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
-SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
@@ -120,11 +121,10 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
+IF %ERRORLEVEL% EQU 9009 (
+    @REM 9009 = command not found on Windows
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
-    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -142,7 +142,7 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %BPS_RESET% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL 1200 --after no_reset read_flash_status
     GOTO eof
 )
 
@@ -164,6 +164,15 @@ FOR %%a IN (%BIGDB_8MB%) DO (
 )
 :end_loop_bigdb_8mb
 
+FOR %%a IN (%MUIDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %MUIDB_8MB%.
+        SET "MUIDB8=1"
+        GOTO end_loop_muidb_8mb
+    )
+)
+:end_loop_muidb_8mb
+
 FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %BIGDB_16MB%.
@@ -174,6 +183,7 @@ FOR %%a IN (%BIGDB_16MB%) DO (
 :end_loop_bigdb_16mb
 
 IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
 IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
@@ -218,6 +228,12 @@ IF %BIGDB8% EQU 1 (
     SET "SPIFFS_OFFSET=0x670000"
 )
 
+@REM Offsets for MUIDB 8mb.
+IF %MUIDB8% EQU 1 (
+    SET "OTA_OFFSET=0x5D0000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
 @REM Offsets for BigDB 16mb.
 IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"

bin/device-install.sh

@@ -5,38 +5,43 @@ BPS_RESET=false
 TFT_BUILD=false
 MCU=""
 
+# Constants
+RESET_BAUD=1200
+FIRMWARE_OFFSET=0x00
+
 # Variant groups
 BIGDB_8MB=(
-	"picomputer-s3"
-	"unphone"
-	"seeed-sensecap-indicator"
-	"crowpanel-esp32s3"
-	"heltec_capsule_sensor_v3"
-	"heltec-v3"
-	"heltec-vision-master-e213"
-	"heltec-vision-master-e290"
-	"heltec-vision-master-t190"
-	"heltec-wireless-paper"
-	"heltec-wireless-tracker"
-	"heltec-wsl-v3"
-	"icarus"
-	"seeed-xiao-s3"
-	"tbeam-s3-core"
-	"tracksenger"
+    "crowpanel-esp32s3"
+    "heltec_capsule_sensor_v3"
+    "heltec-v3"
+    "heltec-vision-master-e213"
+    "heltec-vision-master-e290"
+    "heltec-vision-master-t190"
+    "heltec-wireless-paper"
+    "heltec-wireless-tracker"
+    "heltec-wsl-v3"
+    "icarus"
+    "seeed-xiao-s3"
+    "tbeam-s3-core"
+    "tracksenger"
+)
+MUIDB_8MB=(
+    "picomputer-s3"
+    "unphone"
+    "seeed-sensecap-indicator"
 )
 BIGDB_16MB=(
-	"t-deck"
-	"mesh-tab"
-	"t-energy-s3"
-	"dreamcatcher"
-	"ESP32-S3-Pico"
-	"m5stack-cores3"
-	"station-g2"
+    "t-deck"
+    "mesh-tab"
+    "t-energy-s3"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "m5stack-cores3"
+    "station-g2"
     "t-eth-elite"
+    "tlora-pager"
     "t-watch-s3"
-    "elecrow-adv-35-tft"
-    "elecrow-adv-24-28-tft"
-    "elecrow-adv1-43-50-70-tft"
+    "elecrow-adv"
 )
 S3_VARIANTS=(
     "s3"
@@ -47,6 +52,7 @@ S3_VARIANTS=(
     "station-g2"
     "unphone"
     "t-eth-elite"
+    "tlora-pager"
     "mesh-tab"
     "dreamcatcher"
     "ESP32-S3-Pico"
@@ -106,8 +112,8 @@ while [ $# -gt 0 ]; do
         shift
         ;;
     --1200bps-reset)
-		    BPS_RESET=true
-		    ;;
+        BPS_RESET=true
+        ;;
     --) # Stop parsing options
         shift
         break
@@ -121,7 +127,7 @@ while [ $# -gt 0 ]; do
 done
 
 if [[ $BPS_RESET == true ]]; then
-	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
 	exit 0
 fi
 
@@ -158,6 +164,13 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         fi
     done
 
+    for variant in "${MUIDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x5D0000
+        fi
+    done
+
     # littlefs* offset for BigDB 16mb and OTA OFFSET.
     for variant in "${BIGDB_16MB[@]}"; do
         if [ -z "${FILENAME##*"$variant"*}" ]; then
@@ -201,8 +214,8 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase_flash
-    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
+    $ESPTOOL_CMD erase-flash
+    $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
     $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"

bin/device-update.bat

@@ -6,6 +6,8 @@ SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
+SET "RESET_BAUD=1200"
+SET "UPDATE_OFFSET=0x10000"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "CHANGE_MODE=0"
@@ -85,14 +87,13 @@ IF "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
-SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
-    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
+    SET "ESPTOOL_CMD=""!PYTHON!"" -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -105,11 +106,11 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GEQ 2 (
-    @REM esptool exits with code 1 if help is displayed.
+CALL :LOG_MESSAGE DEBUG "esptool exit code: %ERRORLEVEL%"
+IF %ERRORLEVEL% EQU 9009 (
+    @REM 9009 = command not found on Windows
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
-    GOTO eof
 )
 IF %DEBUG% EQU 1 (
     CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
@@ -127,13 +128,13 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %CHANGE_MODE% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !RESET_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
 @REM Flashing operations.
-CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
+CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET !UPDATE_OFFSET!..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !UPDATE_OFFSET! "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -145,9 +146,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase-flash|write-flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-update.sh

@@ -3,6 +3,11 @@
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 CHANGE_MODE=false
 
+# Constants
+FLASH_BAUD=115200
+RESET_BAUD=1200
+UPDATE_OFFSET=0x10000
+
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
     ESPTOOL_CMD="$PYTHON -m esptool"
@@ -64,7 +69,7 @@ done
 shift "$((OPTIND-1))"
 
 if [ "$CHANGE_MODE" = true ]; then
-	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+	$ESPTOOL_CMD --baud $RESET_BAUD --after no_reset read_flash_status
     exit 0
 fi
 
@@ -75,7 +80,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
+    $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,18 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.9" date="2025-09-03">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.9</url>
+    </release>
+    <release version="2.7.8" date="2025-08-30">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
+    </release>
+    <release version="2.7.7" date="2025-08-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
+    </release>
+    <release version="2.7.6" date="2025-08-12">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.6</url>
+    </release>
     <release version="2.7.5" date="2025-08-09">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.5</url>
     </release>

boards/heltec_mesh_solar.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x0071"]
+    ],
+    "usb_product": "HT-n5262",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_solar",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://heltec.org/project/meshsolar/",
+  "vendor": "Heltec"
+}

boards/meshtiny.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "MeshTiny",
+    "mcu": "nrf52840",
+    "variant": "meshtiny",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino", "freertos"],
+  "name": "MeshTiny",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://github.com/meshtastic/firmware",
+  "vendor": "MTools Tec"
+}

boards/seeed-sensecap-indicator.json

@@ -2,7 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
+      "partitions": "partition-table-8MB.csv",
       "memory_type": "qio_opi"
     },
     "core": "esp32",

boards/unphone.json

@@ -3,7 +3,7 @@
     "arduino": {
       "ldscript": "esp32s3_out.ld",
       "memory_type": "qio_opi",
-      "partitions": "default_8MB.csv"
+      "partitions": "partition-table-8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [

boards/wiscore_rak3172.json

@@ -5,7 +5,7 @@
     },
     "core": "stm32",
     "cpu": "cortex-m4",
-    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_RAK3172_MODULE",
     "f_cpu": "48000000L",
     "mcu": "stm32wle5ccu",
     "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.5.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.9.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -37,4 +37,14 @@ meshtasticd (2.7.5.0) UNRELEASED; urgency=medium
   [  ]
   * GitHub Actions Automatic version bump
 
- --  <github-actions[bot]@users.noreply.github.com>  Sat, 09 Aug 2025 12:46:53 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Wed, 03 Sep 2025 23:39:17 +0000

partition-table-8MB.csv

@@ -0,0 +1,7 @@
+# This is a layout for 8MB of flash for MUI devices
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x5C0000,
+flashApp, app,  ota_1,   0x5D0000,0x0A0000,
+spiffs,   data, spiffs,  0x670000,0x180000

platformio.ini

@@ -60,9 +60,9 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
-	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
-	mathertel/OneButton@2.6.1
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/9573abb64dc9c94f3051348f2bf4fc5cedf03c22.zip
+	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
+	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
 	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
@@ -102,6 +102,14 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
+; Minimal networking libs for nrf52 (excludes Syslog to save flash)
+[nrf52_networking_base]
+lib_deps =
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1
+
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
@@ -110,7 +118,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/0cd108ff783539e41ef38258ba2784ab3b1bdc97.zip
+	https://github.com/meshtastic/device-ui/archive/3677476c8a823ee85056b5fb1d146a3e193f8276.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -149,8 +157,8 @@ lib_deps =
 	emotibit/EmotiBit MLX90632@1.0.8
 	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
-	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
+	# renovate: datasource=github-tags depName=INA3221 packageName=sgtwilko/INA3221
+	https://github.com/sgtwilko/INA3221#bb03d7e9bfcc74fc798838a54f4f99738f29fc6a
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
@@ -169,6 +177,8 @@ lib_deps =
 	adafruit/Adafruit PCT2075@1.0.5
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
+	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
+	adafruit/Adafruit TSL2561@1.1.2
 
 ; (not included in native / portduino)
 [environmental_extra]

src/BluetoothStatus.h

@@ -89,14 +89,22 @@ class BluetoothStatus : public Status
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
 #ifdef BLE_LED
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, LOW);
+#else
                 digitalWrite(BLE_LED, HIGH);
+#endif
 #endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
 #ifdef BLE_LED
+#ifdef BLE_LED_INVERTED
+                digitalWrite(BLE_LED, HIGH);
+#else
                 digitalWrite(BLE_LED, LOW);
+#endif
 #endif
                 break;
             }

src/DisplayFormatters.cpp

@@ -1,7 +1,14 @@
 #include "DisplayFormatters.h"
 
-const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
+                                                         bool usePreset)
 {
+
+    // If use_preset is false, always return "Custom"
+    if (!usePreset) {
+        return "Custom";
+    }
+
     switch (preset) {
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
         return useShortName ? "ShortT" : "ShortTurbo";

src/DisplayFormatters.h

@@ -4,5 +4,6 @@
 class DisplayFormatters
 {
   public:
-    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
+                                                 bool usePreset);
 };

src/Power.cpp

@@ -128,6 +128,7 @@ RAK9154Sensor rak9154Sensor;
 #ifdef HAS_PPM
 // note: XPOWERS_CHIP_XXX must be defined in variant.h
 #include <XPowersLib.h>
+XPowersPPM *PPM = NULL;
 #endif
 
 #ifdef HAS_BQ27220
@@ -681,6 +682,8 @@ bool Power::setup()
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
+    } else if (meshSolarInit()) {
+        found = true;
     } else if (analogInit()) {
         found = true;
     }
@@ -743,7 +746,11 @@ void Power::shutdown()
 
 #if HAS_SCREEN
     if (screen) {
+#ifdef T_DECK_PRO
+        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
+#else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
+#endif
     }
 #endif
 #if !defined(ARCH_STM32WL)
@@ -761,7 +768,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false, true);
+    doDeepSleep(DELAY_FOREVER, true, true);
 #elif defined(ARCH_PORTDUINO)
     exit(EXIT_SUCCESS);
 #else
@@ -826,16 +833,25 @@ void Power::readPowerStatus()
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        std::string threadlist = "Threads running:";
+        // Use stack-allocated buffer to avoid heap allocations in monitoring code
+        char threadlist[256] = "Threads running:";
+        int threadlistLen = strlen(threadlist);
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                threadlist += vformat(" %s", thread->ThreadName.c_str());
+                // Use snprintf to safely append to stack buffer without heap allocation
+                int remaining = sizeof(threadlist) - threadlistLen - 1;
+                if (remaining > 0) {
+                    int written = snprintf(threadlist + threadlistLen, remaining, " %s", thread->ThreadName.c_str());
+                    if (written > 0 && written < remaining) {
+                        threadlistLen += written;
+                    }
+                }
                 running++;
             }
         }
-        LOG_DEBUG(threadlist.c_str());
+        LOG_DEBUG(threadlist);
         LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
                   memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
@@ -849,15 +865,19 @@ void Power::readPowerStatus()
         sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
         auto newHeap = memGet.getFreeHeap();
-        std::string heapTopic =
-            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
-        std::string heapString = std::to_string(newHeap);
-        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
+        // Use stack-allocated buffers to avoid heap allocations in monitoring code
+        char heapTopic[128];
+        snprintf(heapTopic, sizeof(heapTopic), "%s/2/heap/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
+        char heapString[16];
+        snprintf(heapString, sizeof(heapString), "%u", newHeap);
+        mqtt->pubSub.publish(heapTopic, heapString, false);
+
         auto wifiRSSI = WiFi.RSSI();
-        std::string wifiTopic =
-            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
-        std::string wifiString = std::to_string(wifiRSSI);
-        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
+        char wifiTopic[128];
+        snprintf(wifiTopic, sizeof(wifiTopic), "%s/2/wifi/%s", (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh"), mac);
+        char wifiString[16];
+        snprintf(wifiString, sizeof(wifiString), "%d", wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic, wifiString, false);
     }
 #endif
 
@@ -1318,7 +1338,6 @@ bool Power::lipoInit()
 class LipoCharger : public HasBatteryLevel
 {
   private:
-    XPowersPPM *ppm = nullptr;
     BQ27220 *bq = nullptr;
 
   public:
@@ -1327,41 +1346,41 @@ class LipoCharger : public HasBatteryLevel
      */
     bool runOnce()
     {
-        if (ppm == nullptr) {
-            ppm = new XPowersPPM;
-            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
+        if (PPM == nullptr) {
+            PPM = new XPowersPPM;
+            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
             if (result) {
                 LOG_INFO("PPM BQ25896 init succeeded");
                 // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // ppm->setSysPowerDownVoltage(3100);
+                // PPM->setSysPowerDownVoltage(3100);
 
                 // Set input current limit, default is 500mA
-                // ppm->setInputCurrentLimit(800);
+                // PPM->setInputCurrentLimit(800);
 
                 // Disable current limit pin
-                // ppm->disableCurrentLimitPin();
+                // PPM->disableCurrentLimitPin();
 
                 // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                ppm->setChargeTargetVoltage(4288);
+                PPM->setChargeTargetVoltage(4288);
 
                 // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // ppm->setPrechargeCurr(64);
+                // PPM->setPrechargeCurr(64);
 
                 // The premise is that limit pin is disabled, or it will
                 // only follow the maximum charging current set by limit pin.
                 // Set the charging current , Range:0~5056mA ,step:64mA
-                ppm->setChargerConstantCurr(1024);
+                PPM->setChargerConstantCurr(1024);
 
                 // To obtain voltage data, the ADC must be enabled first
-                ppm->enableMeasure();
+                PPM->enableMeasure();
 
                 // Turn on charging function
                 // If there is no battery connected, do not turn on the charging function
-                ppm->enableCharge();
+                PPM->enableCharge();
             } else {
                 LOG_WARN("PPM BQ25896 init failed");
-                delete ppm;
-                ppm = nullptr;
+                delete PPM;
+                PPM = nullptr;
                 return false;
             }
         }
@@ -1402,23 +1421,23 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
+    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
 
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
+    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
      */
     virtual bool isCharging() override
     {
-        bool isCharging = ppm->isCharging();
+        bool isCharging = PPM->isCharging();
         if (isCharging) {
             LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
         } else {
-            if (!ppm->isVbusIn()) {
+            if (!PPM->isVbusIn()) {
                 LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
             }
         }
@@ -1450,3 +1469,73 @@ bool Power::lipoChargerInit()
     return false;
 }
 #endif
+
+#ifdef HELTEC_MESH_SOLAR
+#include "meshSolarApp.h"
+
+/**
+ * meshSolar class for an SMBUS battery sensor.
+ */
+class meshSolarBatteryLevel : public HasBatteryLevel
+{
+
+  public:
+    /**
+     * Init the I2C meshSolar battery level sensor
+     */
+    bool runOnce()
+    {
+        meshSolarStart();
+        return true;
+    }
+
+    /**
+     * Battery state of charge, from 0 to 100 or -1 for unknown
+     */
+    virtual int getBatteryPercent() override { return meshSolarGetBatteryPercent(); }
+
+    /**
+     * The raw voltage of the battery in millivolts, or NAN if unknown
+     */
+    virtual uint16_t getBattVoltage() override { return meshSolarGetBattVoltage(); }
+
+    /**
+     * return true if there is a battery installed in this unit
+     */
+    virtual bool isBatteryConnect() override { return meshSolarIsBatteryConnect(); }
+
+    /**
+     * return true if there is an external power source detected
+     */
+    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
+
+    /**
+     * return true if the battery is currently charging
+     */
+    virtual bool isCharging() override { return meshSolarIsCharging(); }
+};
+
+meshSolarBatteryLevel meshSolarLevel;
+
+/**
+ * Init the meshSolar battery level sensor
+ */
+bool Power::meshSolarInit()
+{
+    bool result = meshSolarLevel.runOnce();
+    LOG_DEBUG("Power::meshSolarInit mesh solar sensor is %s", result ? "ready" : "not ready yet");
+    if (!result)
+        return false;
+    batteryLevel = &meshSolarLevel;
+    return true;
+}
+
+#else
+/**
+ * The meshSolar battery level sensor is unavailable - default to AnalogBatteryLevel
+ */
+bool Power::meshSolarInit()
+{
+    return false;
+}
+#endif

src/SerialConsole.cpp

@@ -64,6 +64,14 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
 
 int32_t SerialConsole::runOnce()
 {
+#ifdef HELTEC_MESH_SOLAR
+    //After enabling the mesh solar serial port module configuration, command processing is handled by the serial port module.
+    if(moduleConfig.serial.enabled && moduleConfig.serial.override_console_serial_port
+        && moduleConfig.serial.mode==meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MS_CONFIG)
+    {
+        return 250;
+    }
+#endif
     return runOncePart();
 }
 

src/buzz/buzz.cpp

@@ -140,6 +140,10 @@ bool playNextLeadUpNote()
     playTones(&note, 1); // Play single note using existing playTones function
 
     leadUpNoteIndex++;
+
+    if (leadUpNoteIndex >= leadUpNotesCount) {
+        return false; // this was the final note
+    }
     return true; // Note was played (playTones handles buzzer availability internally)
 }
 

src/configuration.h

@@ -26,10 +26,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#ifdef RV3028_RTC
+#if __has_include("Melopero_RV3028.h")
 #include "Melopero_RV3028.h"
 #endif
-#ifdef PCF8563_RTC
+#if __has_include("pcf8563.h")
 #include "pcf8563.h"
 #endif
 
@@ -135,7 +135,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // OLED & Input
 // -----------------------------------------------------------------------------
-#if defined(SEEED_WIO_TRACKER_L1)
+#if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
 #define SSD1306_ADDRESS 0x3D
 #define USE_SH1106
 #else

src/detect/ScanI2C.h

@@ -79,7 +79,9 @@ class ScanI2C
         BQ27220,
         LTR553ALS,
         BHI260AP,
-        BMM150
+        BMM150,
+        TSL2561,
+        DRV2605
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -461,7 +461,17 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
+            case TSL25911_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
+                if (registerValue == 0x50) {
+                    type = TSL2591;
+                    logFoundDevice("TSL25911", (uint8_t)addr.address);
+                } else {
+                    type = TSL2561;
+                    logFoundDevice("TSL2561", (uint8_t)addr.address);
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);
@@ -483,8 +493,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
-                    type = MPR121KB;
-                    logFoundDevice("MPR121KB", (uint8_t)addr.address);
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // DRV2605_REG_STATUS
+                    if (registerValue == 0xe0) {
+                        type = DRV2605;
+                        logFoundDevice("DRV2605", (uint8_t)addr.address);
+                    } else {
+                        type = MPR121KB;
+                        logFoundDevice("MPR121KB", (uint8_t)addr.address);
+                    }
                 }
                 break;
 

src/gps/GPS.cpp

@@ -1,5 +1,4 @@
 #include <cstring> // Include for strstr
-#include <string>
 #include <vector>
 
 #include "configuration.h"
@@ -843,9 +842,6 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         setPowerPMU(true);                                        // Power (PMU): on
         writePinStandby(false);                                   // Standby (pin): awake (not standby)
         setPowerUBLOX(true);                                      // Standby (UBLOX): awake
-#ifdef GNSS_AIROHA
-        lastFixStartMsec = 0;
-#endif
         break;
 
     case GPS_SOFTSLEEP:
@@ -863,9 +859,7 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep (not awake)
         setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
 #ifdef GNSS_AIROHA
-        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
-            digitalWrite(PIN_GPS_EN, LOW);
-        }
+        digitalWrite(PIN_GPS_EN, LOW);
 #endif
         break;
 
@@ -877,9 +871,7 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep
         setPowerUBLOX(false, 0);                                    // Standby (UBLOX): asleep, indefinitely
 #ifdef GNSS_AIROHA
-        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
-            digitalWrite(PIN_GPS_EN, LOW);
-        }
+        digitalWrite(PIN_GPS_EN, LOW);
 #endif
         break;
     }
@@ -1062,6 +1054,8 @@ void GPS::down()
         }
         // If update interval long enough (or softsleep unsupported): hardsleep instead
         setPowerState(GPS_HARDSLEEP, sleepTime);
+        // Reset the fix quality to 0, since we're off.
+        fixQual = 0;
     }
 }
 
@@ -1121,11 +1115,19 @@ int32_t GPS::runOnce()
         shouldPublish = true;
     }
 
+    uint8_t prev_fixQual = fixQual;
     bool gotLoc = lookForLocation();
     if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
         LOG_DEBUG("hasValidLocation RISING EDGE");
         hasValidLocation = true;
         shouldPublish = true;
+        // Hold for 20secs after getting a lock to download ephemeris etc
+        fixHoldEnds = millis() + 20000;
+    }
+
+    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
+        fixHoldEnds = millis() + 20000;
+        shouldPublish = true; // Publish immediately, since next publish is at end of hold
     }
 
     bool tooLong = scheduling.searchedTooLong();
@@ -1134,8 +1136,7 @@ int32_t GPS::runOnce()
 
     // Once we get a location we no longer desperately want an update
     if ((gotLoc && gotTime) || tooLong) {
-
-        if (tooLong) {
+        if (tooLong && !gotLoc) {
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
                 LOG_DEBUG("hasValidLocation FALLING EDGE");
@@ -1143,9 +1144,15 @@ int32_t GPS::runOnce()
             p = meshtastic_Position_init_default;
             hasValidLocation = false;
         }
-
-        down();
-        shouldPublish = true; // publish our update for this just finished acquisition window
+        if (millis() > fixHoldEnds) {
+            shouldPublish = true; // publish our update at the end of the lock hold
+            publishUpdate();
+            down();
+#ifdef GPS_DEBUG
+        } else {
+            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
+#endif
+        }
     }
 
     // If state has changed do a publish
@@ -1362,34 +1369,42 @@ GnssModel_t GPS::probe(int serialSpeed)
 
 GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap)
 {
-    String response = "";
+    char response[256] = {0}; // Fixed buffer instead of String
+    uint16_t responseLen = 0;
     unsigned long start = millis();
     while (millis() - start < timeout) {
         if (_serial_gps->available()) {
-            response += (char)_serial_gps->read();
+            char c = _serial_gps->read();
 
-            if (response.endsWith(",") || response.endsWith("\r\n")) {
+            // Add char to buffer if there's space
+            if (responseLen < sizeof(response) - 1) {
+                response[responseLen++] = c;
+                response[responseLen] = '\0';
+            }
+
+            if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
 #ifdef GPS_DEBUG
-                LOG_DEBUG(response.c_str());
+                LOG_DEBUG(response);
 #endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
-                    if (strstr(response.c_str(), chipInfo.detectionString.c_str()) != nullptr) {
+                    if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
                         return chipInfo.driver;
                     }
                 }
             }
-            if (response.endsWith("\r\n")) {
-                response.trim();
-                response = ""; // Reset the response string for the next potential message
+            if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
+                // Reset the response buffer for the next potential message
+                responseLen = 0;
+                response[0] = '\0';
             }
         }
     }
 #ifdef GPS_DEBUG
-    LOG_DEBUG(response.c_str());
+    LOG_DEBUG(response);
 #endif
-    return GNSS_MODEL_UNKNOWN; // Return empty string on timeout
+    return GNSS_MODEL_UNKNOWN; // Return unknown on timeout
 }
 
 GPS *GPS::createGps()
@@ -1504,28 +1519,10 @@ static int32_t toDegInt(RawDegrees d)
  * Perform any processing that should be done only while the GPS is awake and looking for a fix.
  * Override this method to check for new locations
  *
- * @return true if we've acquired a new location
+ * @return true if we've set a new time
  */
 bool GPS::lookForTime()
 {
-
-#ifdef GNSS_AIROHA
-    uint8_t fix = reader.fixQuality();
-    if (fix >= 1 && fix <= 5) {
-        if (lastFixStartMsec > 0) {
-            if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
-                return false;
-            } else {
-                clearBuffer();
-            }
-        } else {
-            lastFixStartMsec = millis();
-            return false;
-        }
-    } else {
-        return false;
-    }
-#endif
     auto ti = reader.time;
     auto d = reader.date;
     if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
@@ -1542,13 +1539,13 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         t.tm_year = d.year() - 1900;
         t.tm_isdst = false;
         if (t.tm_mon > -1) {
-            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
-                      t.tm_sec, ti.age());
-            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultInvalidTime) {
-                // Clear the GPS buffer if we got an invalid time
-                clearBuffer();
+            if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultSuccess) {
+                LOG_DEBUG("NMEA GPS time set %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour,
+                          t.tm_min, t.tm_sec, ti.age());
+                return true;
+            } else {
+                return false;
             }
-            return true;
         } else
             return false;
     } else
@@ -1563,25 +1560,6 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
  */
 bool GPS::lookForLocation()
 {
-#ifdef GNSS_AIROHA
-    if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
-        uint8_t fix = reader.fixQuality();
-        if (fix >= 1 && fix <= 5) {
-            if (lastFixStartMsec > 0) {
-                if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
-                    return false;
-                } else {
-                    clearBuffer();
-                }
-            } else {
-                lastFixStartMsec = millis();
-                return false;
-            }
-        } else {
-            return false;
-        }
-    }
-#endif
     // By default, TinyGPS++ does not parse GPGSA lines, which give us
     //   the 2D/3D fixType (see NMEAGPS.h)
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)

src/gps/GPS.h

@@ -159,7 +159,7 @@ class GPS : private concurrency::OSThread
     uint8_t fixType = 0;      // fix type from GPGSA
 #endif
 
-    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
+    uint32_t fixHoldEnds = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
 

src/gps/RTC.cpp

@@ -23,7 +23,7 @@ static uint64_t zeroOffsetSecs; // GPS based time in secs since 1970 - only upda
  * Reads the current date and time from the RTC module and updates the system time.
  * @return True if the RTC was successfully read and the system time was updated, false otherwise.
  */
-void readFromRTC()
+RTCSetResult readFromRTC()
 {
     struct timeval tv; /* btw settimeofday() is helpful here too*/
 #ifdef RV3028_RTC
@@ -44,15 +44,23 @@ void readFromRTC()
         t.tm_sec = rtc.getSecond();
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+
+#ifdef BUILD_EPOCH
+        if (tv.tv_sec < BUILD_EPOCH) {
+            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+            return RTCSetResultInvalidTime;
+        }
+#endif
+
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
-        timeStartMsec = now;
-        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
+            timeStartMsec = now;
+            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
+        return RTCSetResultSuccess;
     }
 #elif defined(PCF8563_RTC)
     if (rtc_found.address == PCF8563_RTC) {
@@ -75,15 +83,23 @@ void readFromRTC()
         t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-
         uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+
+#ifdef BUILD_EPOCH
+        if (tv.tv_sec < BUILD_EPOCH) {
+            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+            return RTCSetResultInvalidTime;
+        }
+#endif
+
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
-        timeStartMsec = now;
-        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
+            timeStartMsec = now;
+            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
+        return RTCSetResultSuccess;
     }
 #else
     if (!gettimeofday(&tv, NULL)) {
@@ -92,8 +108,10 @@ void readFromRTC()
         LOG_DEBUG("Read RTC time as %ld", printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
+        return RTCSetResultSuccess;
     }
 #endif
+    return RTCSetResultNotSet;
 }
 
 /**
@@ -101,7 +119,7 @@ void readFromRTC()
  *
  * @param q The quality of the provided time.
  * @param tv A pointer to a timeval struct containing the time to potentially set the RTC to.
- * @return True if the RTC was set, false otherwise.
+ * @return RTCSetResult
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
@@ -114,6 +132,10 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
     if (tv->tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
+    } else if (tv->tv_sec > (BUILD_EPOCH + FORTY_YEARS)) {
+        LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch, BUILD_EPOCH,
+                 BUILD_EPOCH + FORTY_YEARS);
+        return RTCSetResultInvalidTime;
     }
 #endif
 
@@ -232,6 +254,10 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     if (tv.tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
+    } else if (tv.tv_sec > (BUILD_EPOCH + FORTY_YEARS)) {
+        LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch, BUILD_EPOCH,
+                 BUILD_EPOCH + FORTY_YEARS);
+        return RTCSetResultInvalidTime;
     }
 #endif
 

src/gps/RTC.h

@@ -48,10 +48,13 @@ uint32_t getTime(bool local = false);
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
 uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
-void readFromRTC();
+RTCSetResult readFromRTC();
 
 time_t gm_mktime(struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60
+#ifdef BUILD_EPOCH
+#define FORTY_YEARS (40UL * 365 * SEC_PER_DAY) // probably time to update your firmware
+#endif

src/graphics/EInkDisplay2.cpp

@@ -67,20 +67,28 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
 
     // FIXME - only draw bits have changed (use backbuf similar to the other displays)
     const bool flipped = config.display.flip_screen;
+    // HACK for L1 EInk
+#if defined(SEEED_WIO_TRACKER_L1_EINK)
+    // For SEEED_WIO_TRACKER_L1_EINK, setRotation(3) is correct but mirrored; flip both axes
+    for (uint32_t y = 0; y < displayHeight; y++) {
+        for (uint32_t x = 0; x < displayWidth; x++) {
+            auto b = buffer[x + (y / 8) * displayWidth];
+            auto isset = b & (1 << (y & 7));
+            adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
+        }
+    }
+#else
     for (uint32_t y = 0; y < displayHeight; y++) {
         for (uint32_t x = 0; x < displayWidth; x++) {
-            // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
             auto b = buffer[x + (y / 8) * displayWidth];
             auto isset = b & (1 << (y & 7));
-
-            // Handle flip here, rather than with setRotation(),
-            // Avoids issues when display width is not a multiple of 8
             if (flipped)
                 adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
             else
                 adafruitDisplay->drawPixel(x, y, isset ? GxEPD_BLACK : GxEPD_WHITE);
         }
     }
+#endif
 
     // Trigger the refresh in GxEPD2
     LOG_DEBUG("Update E-Paper");
@@ -140,13 +148,13 @@ bool EInkDisplay::connect()
 #endif
 #endif
 
-#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1)
+#if defined(TTGO_T_ECHO) || defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 
         adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
-#ifdef ELECROW_ThinkNode_M1
+#if defined(ELECROW_ThinkNode_M1) || defined(T_ECHO_LITE)
         adafruitDisplay->setRotation(4);
 #else
         adafruitDisplay->setRotation(3);
@@ -235,7 +243,7 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(1);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
-#elif defined(HELTEC_MESH_POCKET)
+#elif defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK)
     {
         spi1 = &SPI1;
         spi1->begin();
@@ -249,6 +257,7 @@ bool EInkDisplay::connect()
         // Init GxEPD2
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
+        adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
 #elif defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213)
 

src/graphics/EInkDisplay2.h

@@ -84,7 +84,7 @@ class EInkDisplay : public OLEDDisplay
     SPIClass *hspi = NULL;
 #endif
 
-#if defined(HELTEC_MESH_POCKET)
+#if defined(HELTEC_MESH_POCKET) || defined(SEEED_WIO_TRACKER_L1_EINK)
     SPIClass *spi1 = NULL;
 #endif
 

src/graphics/Screen.cpp

@@ -318,7 +318,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -365,9 +365,6 @@ void Screen::doDeepSleep()
 {
 #ifdef USE_EINK
     setOn(false, graphics::UIRenderer::drawDeepSleepFrame);
-#ifdef PIN_EINK_EN
-    digitalWrite(PIN_EINK_EN, LOW); // power off backlight
-#endif
 #else
     // Without E-Ink display:
     setOn(false);
@@ -391,8 +388,12 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             dispdev->displayOn();
 #endif
 
-#ifdef ELECROW_ThinkNode_M5
-            io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
+#ifdef PIN_EINK_EN
+            if (uiconfig.screen_brightness == 1)
+                digitalWrite(PIN_EINK_EN, HIGH);
+#elif defined(PCA_PIN_EINK_EN)
+            if (uiconfig.screen_brightness == 1)
+                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
 #endif
 
 #if defined(ST7789_CS) &&                                                                                                        \
@@ -424,13 +425,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             // eInkScreensaver parameter is usually NULL (default argument), default frame used instead
             setScreensaverFrames(einkScreensaver);
 #endif
-#ifdef ELECROW_ThinkNode_M1
-            if (digitalRead(PIN_EINK_EN) == HIGH) {
-                digitalWrite(PIN_EINK_EN, LOW);
-            }
-#endif
 
-#ifdef ELECROW_ThinkNode_M5
+#ifdef PIN_EINK_EN
+            digitalWrite(PIN_EINK_EN, LOW);
+#elif defined(PCA_PIN_EINK_EN)
             io.digitalWrite(PCA_PIN_EINK_EN, LOW);
 #endif
 
@@ -552,7 +550,7 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
@@ -694,7 +692,7 @@ int32_t Screen::runOnce()
 
 #ifndef DISABLE_WELCOME_UNSET
     if (!NotificationRenderer::isOverlayBannerShowing() && config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
-        menuHandler::LoraRegionPicker(0);
+        menuHandler::OnboardMessage();
     }
 #endif
     if (!NotificationRenderer::isOverlayBannerShowing() && rebootAtMsec != 0) {

src/graphics/ScreenFonts.h

@@ -16,7 +16,7 @@
 #include "graphics/fonts/OLEDDisplayFontsCS.h"
 #endif
 
-#ifdef CROWPANEL_ESP32S3_5_EPAPER
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #include "graphics/fonts/EinkDisplayFonts.h"
 #endif
 
@@ -40,6 +40,9 @@
 #ifdef OLED_PL
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_PL // Height: 19
 #else
+#ifdef OLED_RU
+#define FONT_MEDIUM_LOCAL ArialMT_Plain_16_RU // Height: 19
+#else
 #ifdef OLED_UA
 #define FONT_MEDIUM_LOCAL ArialMT_Plain_16_UA // Height: 19
 #else
@@ -50,9 +53,13 @@
 #endif
 #endif
 #endif
+#endif
 #ifdef OLED_PL
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_PL // Height: 28
 #else
+#ifdef OLED_RU
+#define FONT_LARGE_LOCAL ArialMT_Plain_24_RU // Height: 28
+#else
 #ifdef OLED_UA
 #define FONT_LARGE_LOCAL ArialMT_Plain_24_UA // Height: 28
 #else
@@ -63,9 +70,10 @@
 #endif
 #endif
 #endif
+#endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS)) &&                                  \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19
@@ -77,7 +85,7 @@
 #define FONT_LARGE FONT_LARGE_LOCAL   // Height: 28
 #endif
 
-#if defined(CROWPANEL_ESP32S3_5_EPAPER)
+#if defined(CROWPANEL_ESP32S3_5_EPAPER) && defined(USE_EINK)
 #undef FONT_SMALL
 #undef FONT_MEDIUM
 #undef FONT_LARGE

src/graphics/TFTDisplay.cpp

@@ -562,6 +562,91 @@ class LGFX : public lgfx::LGFX_Device
 
 static LGFX *tft = nullptr;
 
+#elif defined(ST7796_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7796 driver chip
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7796 _panel_instance;
+    lgfx::Bus_SPI _bus_instance;
+    lgfx::Light_PWM _light_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _bus_instance.config();
+
+            // SPI
+            cfg.spi_host = ST7796_SPI_HOST;
+            cfg.spi_mode = 0;
+            cfg.freq_write = SPI_FREQUENCY; // SPI clock for transmission (up to 80MHz, rounded to the value obtained by dividing
+                                            // 80MHz by an integer)
+            cfg.freq_read = SPI_READ_FREQUENCY; // SPI clock when receiving
+            cfg.spi_3wire = false;
+            cfg.use_lock = true;               // Set to true to use transaction locking
+            cfg.dma_channel = SPI_DMA_CH_AUTO; // SPI_DMA_CH_AUTO; // Set DMA channel to use (0=not use DMA / 1=1ch / 2=ch /
+                                               // SPI_DMA_CH_AUTO=auto setting)
+            cfg.pin_sclk = ST7796_SCK;         // Set SPI SCLK pin number
+            cfg.pin_mosi = ST7796_SDA;         // Set SPI MOSI pin number
+            cfg.pin_miso = ST7796_MISO;        // Set SPI MISO pin number (-1 = disable)
+            cfg.pin_dc = ST7796_RS;            // Set SPI DC pin number (-1 = disable)
+
+            _bus_instance.config(cfg);              // applies the set value to the bus.
+            _panel_instance.setBus(&_bus_instance); // set the bus on the panel.
+        }
+
+        {                                        // Set the display panel control.
+            auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
+
+            cfg.pin_cs = ST7796_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7796_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7796_BUSY; // Pin number where BUSY is connected (-1 = disable)
+
+            // cfg.memory_width = TFT_WIDTH;              // Maximum width supported by the driver IC
+            // cfg.memory_height = TFT_HEIGHT;            // Maximum height supported by the driver IC
+            cfg.panel_width = TFT_WIDTH;                  // actual displayable width
+            cfg.panel_height = TFT_HEIGHT;                // actual displayable height
+            cfg.offset_x = TFT_OFFSET_X;                  // Panel offset amount in X direction
+            cfg.offset_y = TFT_OFFSET_Y;                  // Panel offset amount in Y direction
+            cfg.offset_rotation = TFT_OFFSET_ROTATION;    // Rotation direction value offset 0~7 (4~7 is mirrored)
+#ifdef TFT_DUMMY_READ_PIXELS
+            cfg.dummy_read_pixel = TFT_DUMMY_READ_PIXELS; // Number of bits for dummy read before pixel readout
+#else
+            cfg.dummy_read_pixel = 8; // Number of bits for dummy read before pixel readout
+#endif
+            cfg.dummy_read_bits = 1;                      // Number of bits for dummy read before non-pixel data read
+            cfg.readable = true;                          // Set to true if data can be read
+            cfg.invert = true;                            // Set to true if the light/darkness of the panel is reversed
+            cfg.rgb_order = false;                        // Set to true if the panel's red and blue are swapped
+            cfg.dlen_16bit =
+                false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
+            cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
+
+            _panel_instance.config(cfg);
+        }
+
+#ifdef ST7796_BL
+        // Set the backlight control. (delete if not necessary)
+        {
+            auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
+
+            cfg.pin_bl = ST7796_BL; // Pin number to which the backlight is connected
+            cfg.invert = false;     // true to invert the brightness of the backlight
+            cfg.freq = 44100;
+            cfg.pwm_channel = 7;
+
+            _light_instance.config(cfg);
+            _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
+        }
+#endif
+
+        setPanel(&_panel_instance); // Sets the panel to use.
+    }
+};
+
+static LGFX *tft = nullptr;
+
 #elif defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER)
 
 #include <LovyanGFX.hpp> // Graphics and font library for ILI9341/ILI9342 driver chip
@@ -667,15 +752,19 @@ static LGFX *tft = nullptr;
 static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h
 #elif ARCH_PORTDUINO
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+#if defined(LGFX_SDL)
+#include <lgfx/v1/platforms/sdl/Panel_sdl.hpp>
+#endif
 
 class LGFX : public lgfx::LGFX_Device
 {
-    lgfx::Panel_Device *_panel_instance;
     lgfx::Bus_SPI _bus_instance;
 
     lgfx::ITouch *_touch_instance;
 
   public:
+    lgfx::Panel_Device *_panel_instance;
+
     LGFX(void)
     {
         if (settingsMap[displayPanel] == st7789)
@@ -694,6 +783,11 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance = new lgfx::Panel_ILI9488;
         else if (settingsMap[displayPanel] == hx8357d)
             _panel_instance = new lgfx::Panel_HX8357D;
+#if defined(LGFX_SDL)
+        else if (settingsMap[displayPanel] == x11) {
+            _panel_instance = new lgfx::Panel_sdl;
+        }
+#endif
         else {
             _panel_instance = new lgfx::Panel_NULL;
             LOG_ERROR("Unknown display panel configured!");
@@ -754,7 +848,13 @@ class LGFX : public lgfx::LGFX_Device
             _touch_instance->config(touch_cfg);
             _panel_instance->setTouch(_touch_instance);
         }
-
+#if defined(LGFX_SDL)
+        if (settingsMap[displayPanel] == x11) {
+            lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)_panel_instance;
+            sdl_panel_->setup();
+            sdl_panel_->addKeyCodeMapping(SDLK_RETURN, SDL_SCANCODE_KP_ENTER);
+        }
+#endif
         setPanel(_panel_instance); // Sets the panel to use.
     }
 };
@@ -849,9 +949,29 @@ static LGFX *tft = nullptr;
 #include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
 #include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
 
+class PanelInit_ST7701 : public lgfx::Panel_ST7701
+{
+  public:
+    const uint8_t *getInitCommands(uint8_t listno) const override
+    {
+        // 180 degree hw rotation: vertical flip, horizontal flip
+        static constexpr const uint8_t list1[] = {0x36, 1,   0x10,                         // MADCTL for vertical flip
+                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x10, // Command2 BK0 SEL
+                                                  0xC7, 1,   0x04, // SDIR: X-direction Control (Horizontal Flip)
+                                                  0xFF, 5,   0x77, 0x01, 0x00, 0x00, 0x00, // Command2 BK0 DIS
+                                                  0xFF, 0xFF};
+        switch (listno) {
+        case 1:
+            return list1;
+        default:
+            return lgfx::Panel_ST7701::getInitCommands(listno);
+        }
+    }
+};
+
 class LGFX : public lgfx::LGFX_Device
 {
-    lgfx::Panel_ST7701 _panel_instance;
+    PanelInit_ST7701 _panel_instance;
     lgfx::Bus_RGB _bus_instance;
     lgfx::Light_PWM _light_instance;
     lgfx::Touch_FT5x06 _touch_instance;
@@ -962,8 +1082,9 @@ static LGFX *tft = nullptr;
 
 #endif
 
-#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ST7796_CS) || defined(ILI9341_DRIVER) ||           \
+    defined(ILI9342_DRIVER) || defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST72xx_DE) ||           \
+    (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -1007,37 +1128,154 @@ TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY g
 #endif
 }
 
+TFTDisplay::~TFTDisplay()
+{
+    // Clean up allocated line pixel buffer to prevent memory leak
+    if (linePixelBuffer != nullptr) {
+        free(linePixelBuffer);
+        linePixelBuffer = nullptr;
+    }
+}
+
 // Write the buffer to the display memory
 void TFTDisplay::display(bool fromBlank)
 {
     if (fromBlank)
         tft->fillScreen(TFT_BLACK);
-    // tft->clear();
+
     concurrency::LockGuard g(spiLock);
 
-    uint16_t x, y;
+    uint32_t x, y;
+    uint32_t y_byteIndex;
+    uint8_t y_byteMask;
+    uint32_t x_FirstPixelUpdate;
+    uint32_t x_LastPixelUpdate;
+    bool isset, dblbuf_isset;
+    uint16_t colorTftMesh, colorTftBlack;
+    bool somethingChanged = false;
 
-    for (y = 0; y < displayHeight; y++) {
-        for (x = 0; x < displayWidth; x++) {
-            auto isset = buffer[x + (y / 8) * displayWidth] & (1 << (y & 7));
+    // Store colors byte-reversed so that TFT_eSPI doesn't have to swap bytes in a separate step
+    colorTftMesh = (TFT_MESH >> 8) | ((TFT_MESH & 0xFF) << 8);
+    colorTftBlack = (TFT_BLACK >> 8) | ((TFT_BLACK & 0xFF) << 8);
+
+    y = 0;
+    while (y < displayHeight) {
+        y_byteIndex = (y / 8) * displayWidth;
+        y_byteMask = (1 << (y & 7));
+
+        // Step 1: Do a quick scan of 8 rows together. This allows fast-forwarding over unchanged screen areas.
+        if (y_byteMask == 1) {
             if (!fromBlank) {
-                // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficent
-                auto dblbuf_isset = buffer_back[x + (y / 8) * displayWidth] & (1 << (y & 7));
-                if (isset != dblbuf_isset) {
-                    tft->drawPixel(x, y, isset ? TFT_MESH : TFT_BLACK);
+                for (x = 0; x < displayWidth; x++) {
+                    if (buffer[x + y_byteIndex] != buffer_back[x + y_byteIndex])
+                        break;
                 }
-            } else if (isset) {
-                tft->drawPixel(x, y, TFT_MESH);
+            } else {
+                for (x = 0; x < displayWidth; x++) {
+                    if (buffer[x + y_byteIndex] != 0)
+                        break;
+                }
+            }
+            if (x >= displayWidth) {
+                // No changed pixels found in these 8 rows, fast-forward to the next 8
+                y = y + 8;
+                continue;
             }
         }
+
+        // Step 2: Scan each of the 8 rows individually. Find the first pixel in each row that needs updating
+        for (x_FirstPixelUpdate = 0; x_FirstPixelUpdate < displayWidth; x_FirstPixelUpdate++) {
+            isset = buffer[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
+
+            if (!fromBlank) {
+                // get src pixel in the page based ordering the OLED lib uses
+                dblbuf_isset = buffer_back[x_FirstPixelUpdate + y_byteIndex] & y_byteMask;
+                if (isset != dblbuf_isset) {
+                    break;
+                }
+            } else if (isset) {
+                break;
+            }
+        }
+
+        // Did we find a pixel that needs updating on this row?
+        if (x_FirstPixelUpdate < displayWidth) {
+
+            // Quickly write out the first changed pixel (saves another array lookup)
+            linePixelBuffer[x_FirstPixelUpdate] = isset ? colorTftMesh : colorTftBlack;
+            x_LastPixelUpdate = x_FirstPixelUpdate;
+
+            // Step 3: copy all remaining pixels in this row into the pixel line buffer,
+            // while also recording the last pixel in the row that needs updating
+            for (x = x_FirstPixelUpdate + 1; x < displayWidth; x++) {
+                isset = buffer[x + y_byteIndex] & y_byteMask;
+                linePixelBuffer[x] = isset ? colorTftMesh : colorTftBlack;
+
+                if (!fromBlank) {
+                    dblbuf_isset = buffer_back[x + y_byteIndex] & y_byteMask;
+                    if (isset != dblbuf_isset) {
+                        x_LastPixelUpdate = x;
+                    }
+                } else if (isset) {
+                    x_LastPixelUpdate = x;
+                }
+            }
+
+            // Step 4: Send the changed pixels on this line to the screen as a single block transfer.
+            // This function accepts pixel data MSB first so it can dump the memory straight out the SPI port.
+            tft->pushRect(x_FirstPixelUpdate, y, (x_LastPixelUpdate - x_FirstPixelUpdate + 1), 1,
+                          &linePixelBuffer[x_FirstPixelUpdate]);
+
+            somethingChanged = true;
+        }
+        y++;
     }
     // Copy the Buffer to the Back Buffer
-    for (y = 0; y < (displayHeight / 8); y++) {
-        for (x = 0; x < displayWidth; x++) {
-            uint16_t pos = x + y * displayWidth;
-            buffer_back[pos] = buffer[pos];
+    if (somethingChanged)
+        memcpy(buffer_back, buffer, displayBufferSize);
+}
+
+void TFTDisplay::sdlLoop()
+{
+#if defined(LGFX_SDL)
+    static int lastPressed = 0;
+    static int shuttingDown = false;
+    if (settingsMap[displayPanel] == x11) {
+        lgfx::Panel_sdl *sdl_panel_ = (lgfx::Panel_sdl *)tft->_panel_instance;
+        if (sdl_panel_->loop() && !shuttingDown) {
+            LOG_WARN("Window Closed!");
+            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SHUTDOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
+            inputBroker->injectInputEvent(&event);
+        }
+
+        // debounce
+        if (lastPressed != 0 && !lgfx::v1::gpio_in(lastPressed))
+            return;
+        if (!lgfx::v1::gpio_in(37)) {
+            lastPressed = 37;
+            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_RIGHT, .kbchar = 0, .touchX = 0, .touchY = 0};
+            inputBroker->injectInputEvent(&event);
+        } else if (!lgfx::v1::gpio_in(36)) {
+            lastPressed = 36;
+            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_UP, .kbchar = 0, .touchX = 0, .touchY = 0};
+            inputBroker->injectInputEvent(&event);
+        } else if (!lgfx::v1::gpio_in(38)) {
+            lastPressed = 38;
+            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_DOWN, .kbchar = 0, .touchX = 0, .touchY = 0};
+            inputBroker->injectInputEvent(&event);
+        } else if (!lgfx::v1::gpio_in(39)) {
+            lastPressed = 39;
+            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_LEFT, .kbchar = 0, .touchX = 0, .touchY = 0};
+            inputBroker->injectInputEvent(&event);
+        } else if (!lgfx::v1::gpio_in(SDL_SCANCODE_KP_ENTER)) {
+            lastPressed = SDL_SCANCODE_KP_ENTER;
+            InputEvent event = {.inputEvent = (input_broker_event)INPUT_BROKER_SELECT, .kbchar = 0, .touchX = 0, .touchY = 0};
+            inputBroker->injectInputEvent(&event);
+        } else {
+            lastPressed = 0;
         }
     }
+#endif
 }
 
 // Send a command to the display (low level function)
@@ -1184,15 +1422,23 @@ bool TFTDisplay::connect()
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
 #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
     tft->setRotation(1); // T-Deck has the TFT in landscape
-#elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
+#elif defined(T_WATCH_S3)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
-#elif ARCH_PORTDUINO
+#elif ARCH_PORTDUINO || defined(SENSECAP_INDICATOR) || defined(T_LORA_PAGER)
     tft->setRotation(0); // use config.yaml to set rotation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label
 #endif
     tft->fillScreen(TFT_BLACK);
 
+    if (this->linePixelBuffer == NULL) {
+        this->linePixelBuffer = (uint16_t *)malloc(sizeof(uint16_t) * displayWidth);
+
+        if (!this->linePixelBuffer) {
+            LOG_ERROR("Not enough memory to create TFT line buffer\n");
+            return false;
+        }
+    }
     return true;
 }
 

src/graphics/TFTDisplay.h

@@ -20,9 +20,13 @@ class TFTDisplay : public OLEDDisplay
     */
     TFTDisplay(uint8_t, int, int, OLEDDISPLAY_GEOMETRY, HW_I2C);
 
+    // Destructor to clean up allocated memory
+    ~TFTDisplay();
+
     // Write the buffer to the display memory
     virtual void display() override { display(false); };
     virtual void display(bool fromBlank);
+    void sdlLoop();
 
     // Turn the display upside down
     virtual void flipScreenVertically();
@@ -57,4 +61,6 @@ class TFTDisplay : public OLEDDisplay
 
     // Connect to the display
     virtual bool connect() override;
+
+    uint16_t *linePixelBuffer = nullptr;
 };

src/graphics/draw/DebugRenderer.cpp

@@ -94,7 +94,8 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -106,7 +107,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) &&                                  \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -121,7 +122,8 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
     } else {
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -261,12 +263,6 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
             display->drawString(x + 1, y, "USB");
     }
 
-    //    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, true);
-
-    //    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
-    //    if (config.display.heading_bold)
-    //        display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
-
     uint32_t currentMillis = millis();
     uint32_t seconds = currentMillis / 1000;
     uint32_t minutes = seconds / 60;
@@ -396,7 +392,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
 
     // === Second Row: Radio Preset ===
-    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
     if (region != nullptr) {

src/graphics/draw/MenuHandler.cpp

@@ -26,6 +26,27 @@ menuHandler::screenMenus menuHandler::menuQueue = menu_none;
 bool test_enabled = false;
 uint8_t test_count = 0;
 
+void menuHandler::OnboardMessage()
+{
+    static const char *optionsArray[] = {"OK", "Got it!"};
+    enum optionsNumbers { OK, got };
+    BannerOverlayOptions bannerOptions;
+#if HAS_TFT
+    bannerOptions.message = "Welcome to Meshtastic!\nSwipe to navigate and\nlong press to select\nor open a menu.";
+#elif defined(BUTTON_PIN)
+    bannerOptions.message = "Welcome to Meshtastic!\nClick to navigate and\nlong press to select\nor open a menu.";
+#else
+    bannerOptions.message = "Welcome to Meshtastic!\nUse the Select button\nto open menus\nand make selections.";
+#endif
+    bannerOptions.optionsArrayPtr = optionsArray;
+    bannerOptions.optionsCount = 2;
+    bannerOptions.bannerCallback = [](int selected) -> void {
+        menuHandler::menuQueue = menuHandler::no_timeout_lora_picker;
+        screen->runNow();
+    };
+    screen->showOverlayBanner(bannerOptions);
+}
+
 void menuHandler::LoraRegionPicker(uint32_t duration)
 {
     static const char *optionsArray[] = {"Back",
@@ -318,7 +339,7 @@ void menuHandler::homeBaseMenu()
     static int optionsEnumArray[enumEnd] = {Back};
     int options = 1;
 
-#ifdef PIN_EINK_EN
+#if defined(PIN_EINK_EN) || defined(PCA_PIN_EINK_EN)
     optionsArray[options] = "Toggle Backlight";
     optionsEnumArray[options++] = Backlight;
 #else
@@ -342,12 +363,24 @@ void menuHandler::homeBaseMenu()
     bannerOptions.optionsCount = options;
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected == Backlight) {
-#ifdef PIN_EINK_EN
-            if (digitalRead(PIN_EINK_EN) == HIGH) {
+#if defined(PIN_EINK_EN)
+            if (uiconfig.screen_brightness == 1) {
+                uiconfig.screen_brightness = 0;
                 digitalWrite(PIN_EINK_EN, LOW);
             } else {
+                uiconfig.screen_brightness = 1;
                 digitalWrite(PIN_EINK_EN, HIGH);
             }
+            saveUIConfig();
+#elif defined(PCA_PIN_EINK_EN)
+            if (uiconfig.screen_brightness == 1) {
+                uiconfig.screen_brightness = 0;
+                io.digitalWrite(PCA_PIN_EINK_EN, LOW);
+            } else {
+                uiconfig.screen_brightness = 1;
+                io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
+            }
+            saveUIConfig();
 #endif
         } else if (selected == Sleep) {
             screen->setOn(false);
@@ -401,8 +434,8 @@ void menuHandler::systemBaseMenu()
 
     optionsArray[options] = "Notifications";
     optionsEnumArray[options++] = Notifications;
-#if defined(ST7789_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107) ||             \
-    defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
+#if defined(ST7789_CS) || defined(ST7796_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) ||              \
+    defined(USE_SH1107) || defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
     optionsArray[options] = "Screen Options";
     optionsEnumArray[options++] = ScreenOptions;
 #endif
@@ -692,7 +725,7 @@ void menuHandler::BrightnessPickerMenu()
 #if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190)
             // For HELTEC devices, use analogWrite to control backlight
             analogWrite(VTFT_LEDA, uiconfig.screen_brightness);
-#elif defined(ST7789_CS)
+#elif defined(ST7789_CS) || defined(ST7796_CS)
             static_cast<TFTDisplay *>(screen->getDisplayDevice())->setDisplayBrightness(uiconfig.screen_brightness);
 #elif defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) || defined(USE_SH1107)
             screen->getDisplayDevice()->setBrightness(uiconfig.screen_brightness);
@@ -735,7 +768,7 @@ void menuHandler::TFTColorPickerMenu(OLEDDisplay *display)
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 10;
     bannerOptions.bannerCallback = [display](int selected) -> void {
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
         uint8_t TFT_MESH_r = 0;
         uint8_t TFT_MESH_g = 0;
         uint8_t TFT_MESH_b = 0;
@@ -1012,7 +1045,7 @@ void menuHandler::screenOptionsMenu()
     }
 
     // Only show screen color for TFT displays
-#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || HAS_TFT
+#if defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || defined(T_DECK) || defined(T_LORA_PAGER) || HAS_TFT
     optionsArray[options] = "Screen Color";
     optionsEnumArray[options++] = ScreenColor;
 #endif
@@ -1120,6 +1153,9 @@ void menuHandler::handleMenuSwitch(OLEDDisplay *display)
     case lora_picker:
         LoraRegionPicker();
         break;
+    case no_timeout_lora_picker:
+        LoraRegionPicker(0);
+        break;
     case TZ_picker:
         TZPicker();
         break;

src/graphics/draw/MenuHandler.h

@@ -10,6 +10,7 @@ class menuHandler
     enum screenMenus {
         menu_none,
         lora_picker,
+        no_timeout_lora_picker,
         TZ_picker,
         twelve_hour_picker,
         clock_face_picker,
@@ -41,6 +42,7 @@ class menuHandler
     };
     static screenMenus menuQueue;
 
+    static void OnboardMessage();
     static void LoraRegionPicker(uint32_t duration = 30000);
     static void handleMenuSwitch(OLEDDisplay *display);
     static void showConfirmationBanner(const char *message, std::function<void()> onConfirm);

src/graphics/draw/MessageRenderer.cpp

@@ -137,7 +137,11 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, textChunk.c_str());
             }
             display->drawString(cursorX, fontY, textChunk.c_str());
+#if defined(OLED_UA) || defined(OLED_RU)
+            cursorX += display->getStringWidth(textChunk.c_str(), textChunk.length(), true);
+#else
             cursorX += display->getStringWidth(textChunk.c_str());
+#endif
             i = nextControl;
             continue;
         }
@@ -155,7 +159,12 @@ void drawStringWithEmotes(OLEDDisplay *display, int x, int y, const std::string
                 display->drawString(cursorX + 1, fontY, remaining.c_str());
             }
             display->drawString(cursorX, fontY, remaining.c_str());
+#if defined(OLED_UA) || defined(OLED_RU)
+            cursorX += display->getStringWidth(remaining.c_str(), remaining.length(), true);
+#else
             cursorX += display->getStringWidth(remaining.c_str());
+#endif
+
             break;
         }
     }
@@ -374,10 +383,16 @@ std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerS
         } else {
             word += ch;
             std::string test = line + word;
-            // Keep these lines for diagnostics
-            // LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
-            // LOG_INFO("Current String: %s", test.c_str());
-            if (display->getStringWidth(test.c_str()) > textWidth) {
+// Keep these lines for diagnostics
+// LOG_INFO("Char: '%c' (0x%02X)", ch, (unsigned char)ch);
+// LOG_INFO("Current String: %s", test.c_str());
+// Note: there are boolean comparison uint16 (getStringWidth) with int (textWidth), hope textWidth is always positive :)
+#if defined(OLED_UA) || defined(OLED_RU)
+            uint16_t strWidth = display->getStringWidth(test.c_str(), test.length(), true);
+#else
+            uint16_t strWidth = display->getStringWidth(test.c_str());
+#endif
+            if (strWidth > textWidth) {
                 if (!line.empty())
                     lines.push_back(line);
                 line = word;

src/graphics/draw/NotificationRenderer.cpp

@@ -383,7 +383,9 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
 
     uint8_t firstOptionToShow = 0;
     if (alertBannerOptions > 0) {
-        if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
+        if (visibleTotalLines - lineCount == 1) {
+            firstOptionToShow = curSelected;
+        } else if (curSelected > 1 && alertBannerOptions > visibleTotalLines - lineCount) {
             if (curSelected > alertBannerOptions - visibleTotalLines + lineCount)
                 firstOptionToShow = alertBannerOptions - visibleTotalLines + lineCount;
             else
@@ -392,6 +394,9 @@ void NotificationRenderer::drawAlertBannerOverlay(OLEDDisplay *display, OLEDDisp
             firstOptionToShow = 0;
         }
     }
+    // Useful log line for troubleshooting:
+    /* LOG_WARN("alertBannerOptions: %u, curSelected: %u, visibleTotalLines: %u, lineCount: %u, firstOptionToShow: %u",
+             alertBannerOptions, curSelected, visibleTotalLines, lineCount, firstOptionToShow); */
 
     for (int i = firstOptionToShow; i < alertBannerOptions && linesShown < visibleTotalLines; i++, linesShown++) {
         if (i == curSelected) {

src/graphics/draw/UIRenderer.cpp

@@ -194,7 +194,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
     }
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) &&                                  \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 
     if (isHighResolution) {

src/graphics/fonts/EinkDisplayFonts.cpp

@@ -1,3 +1,5 @@
+#ifdef USE_EINK
+
 #include "EinkDisplayFonts.h"
 
 // Created by https://oleddisplay.squix.ch/ Consider a donation
@@ -1182,3 +1184,5 @@ const uint8_t Monospaced_plain_30[] PROGMEM = {
     0xF0, 0xFF, 0x01, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x00, 0xE0, 0x00, 0xFE, 0x03, 0x00, 0xE0, 0x80, 0x7F,
     0x00, 0x00, 0xE0, 0xE0, 0x1F, 0x00, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x10 // 255
 };
+
+#endif // USE_EINK

src/graphics/fonts/EinkDisplayFonts.h

@@ -1,6 +1,8 @@
 #ifndef EINKDISPLAYFONTS_h
 #define EINKDISPLAYFONTS_h
 
+#ifdef USE_EINK
+
 #ifdef ARDUINO
 #include <Arduino.h>
 #elif __MBED__
@@ -11,4 +13,7 @@
  * Monospaced Plain 30
  */
 extern const uint8_t Monospaced_plain_30[] PROGMEM;
+
+#endif // USE_EINK
+
 #endif

src/graphics/fonts/OLEDDisplayFontsCS.cpp

@@ -1,3 +1,5 @@
+#ifdef OLED_CS
+
 #include "OLEDDisplayFontsCS.h"
 
 // Font generated or edited with the glyphEditor
@@ -1860,4 +1862,6 @@ const uint8_t ArialMT_Plain_24_CS[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00,
     0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00,
     0x06, // 255
-};
+};
+
+#endif // OLED_CS

src/graphics/fonts/OLEDDisplayFontsPL.cpp

@@ -1,4 +1,5 @@
 // trunk-ignore-all(clang-format): Preserve long lines
+#ifdef OLED_PL
 #include "OLEDDisplayFontsPL.h"
 
 const uint8_t ArialMT_Plain_10_PL[] PROGMEM = {
@@ -1310,4 +1311,6 @@ const uint8_t ArialMT_Plain_24_PL[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0x00, 0xF0, 0x01, 0x06, 0x00, 0x80, 0x0F, 0x07, 0x80, 0x00, 0xFE, 0x03, 0xE0, 0x00, 0xFC, 0x00, 0x60, 0xC0, 0x1F, 0x00, 0x20, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 253
     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0xFF, 0x07, 0xE0, 0xFF, 0xFF, 0x07, 0x00, 0x1C, 0x18, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xF0, 0x03, // 254
     0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x06, // 255
-};
+};
+
+#endif // OLED_PL

src/graphics/fonts/OLEDDisplayFontsRU.h

@@ -8,4 +8,6 @@
 #endif
 
 extern const uint8_t ArialMT_Plain_10_RU[] PROGMEM;
+extern const uint8_t ArialMT_Plain_16_RU[] PROGMEM;
+extern const uint8_t ArialMT_Plain_24_RU[] PROGMEM;
 #endif

src/graphics/fonts/OLEDDisplayFontsUA.cpp

@@ -1,3 +1,5 @@
+#ifdef OLED_UA
+
 #include "OLEDDisplayFontsUA.h"
 
 // Font generated or edited with the glyphEditor
@@ -1920,4 +1922,6 @@ const uint8_t ArialMT_Plain_24_UA[] PROGMEM = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xC1, 0x00, 0x00, 0xF0, 0xE3, 0x00, 0x00, 0x38, 0x7B, 0x00, 0x00, 0x18, 0x1A, 0x00, 0x00,
     0x18, 0x0E, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8,
     0xFF, // 1103
-};
+};
+
+#endif // OLED_UA

src/graphics/images.h

@@ -27,7 +27,8 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
                                                     0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || ARCH_PORTDUINO) &&                \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
+     ARCH_PORTDUINO) &&                                                                                                          \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

src/graphics/niche/Drivers/EInk/ZJY122250_0213BAAMFGN.cpp

@@ -0,0 +1,68 @@
+#include "./ZJY122250_0213BAAMFGN.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+using namespace NicheGraphics::Drivers;
+
+// Map the display controller IC's output to the connected panel
+void ZJY122250_0213BAAMFGN::configScanning()
+{
+    // "Driver output control"
+    // Scan gates from 0 to 249 (vertical resolution 250px)
+    sendCommand(0x01);
+    sendData(0xF9);
+    sendData(0x00);
+    sendData(0x00);
+}
+
+// Specify which information is used to control the sequence of voltages applied to move the pixels
+// - For this display, configUpdateSequence() specifies that a suitable LUT will be loaded from
+//   the controller IC's OTP memory, when the update procedure begins.
+void ZJY122250_0213BAAMFGN::configWaveform()
+{
+    switch (updateType) {
+    case FAST:
+        sendCommand(0x3C); // Border waveform:
+        sendData(0x80);    // VCOM
+        break;
+    case FULL:
+    default:
+        sendCommand(0x3C); // Border waveform:
+        sendData(0x01);    // Follow LUT 1 (blink same as white pixels)
+        break;
+    }
+
+    sendCommand(0x18); // Temperature sensor:
+    sendData(0x80);    // Use internal temperature sensor to select an appropriate refresh waveform
+}
+
+void ZJY122250_0213BAAMFGN::configUpdateSequence()
+{
+    switch (updateType) {
+    case FAST:
+        sendCommand(0x22); // Set "update sequence"
+        sendData(0xFF);    // Will load LUT from OTP memory, Display mode 2 "differential refresh"
+        break;
+
+    case FULL:
+    default:
+        sendCommand(0x22); // Set "update sequence"
+        sendData(0xF7);    // Will load LUT from OTP memory
+        break;
+    }
+}
+
+// Once the refresh operation has been started,
+// begin periodically polling the display to check for completion, using the normal Meshtastic threading code
+// Only used when refresh is "async"
+void ZJY122250_0213BAAMFGN::detachFromUpdate()
+{
+    switch (updateType) {
+    case FAST:
+        return beginPolling(50, 500); // At least 500ms for fast refresh
+    case FULL:
+    default:
+        return beginPolling(100, 2000); // At least 2 seconds for full refresh
+    }
+}
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/Drivers/EInk/ZJY122250_0213BAAMFGN.h

@@ -0,0 +1,42 @@
+/*
+
+E-Ink display driver
+    - ZJY122250_0213BAAMFGN
+    - Manufacturer: Zhongjingyuan
+    - Size: 2.13 inch
+    - Resolution: 250px x 122px
+    - Flex connector marking (not a unique identifier): FPC-A002
+
+*/
+
+#pragma once
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+#include "configuration.h"
+
+#include "./SSD16XX.h"
+
+namespace NicheGraphics::Drivers
+{
+class ZJY122250_0213BAAMFGN : public SSD16XX
+{
+    // Display properties
+  private:
+    static constexpr uint32_t width = 122;
+    static constexpr uint32_t height = 250;
+    static constexpr UpdateTypes supported = (UpdateTypes)(FULL | FAST);
+
+  public:
+    ZJY122250_0213BAAMFGN() : SSD16XX(width, height, supported) {}
+
+  protected:
+    virtual void configScanning() override;
+    virtual void configWaveform() override;
+    virtual void configUpdateSequence() override;
+    void detachFromUpdate() override;
+};
+
+} // namespace NicheGraphics::Drivers
+
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS

src/graphics/niche/InkHUD/DisplayHealth.cpp

@@ -7,12 +7,7 @@ using namespace NicheGraphics;
 
 // Timing for "maintenance"
 // Paying off full-refresh debt with unprovoked updates, if the display is not very active
-
-#ifdef SEEED_WIO_TRACKER_L1
-static constexpr uint32_t MAINTENANCE_MS_INITIAL = 5 * 1000UL;
-#else
 static constexpr uint32_t MAINTENANCE_MS_INITIAL = 60 * 1000UL;
-#endif
 static constexpr uint32_t MAINTENANCE_MS = 60 * 60 * 1000UL;
 
 InkHUD::DisplayHealth::DisplayHealth() : concurrency::OSThread("Mediator")

src/input/ButtonThread.cpp

@@ -92,8 +92,11 @@ bool ButtonThread::initButton(const ButtonConfig &config)
     if (config.shortLong != INPUT_BROKER_NONE) {
         _shortLong = config.shortLong;
     }
-
+#ifdef USE_EINK
+    userButton.setDebounceMs(0);
+#else
     userButton.setDebounceMs(1);
+#endif
     userButton.setPressMs(_longPressTime);
 
     if (screen) {
@@ -137,8 +140,7 @@ int32_t ButtonThread::runOnce()
     }
 
     // Progressive lead-up sound system
-    if (buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS &&
-        (millis() - buttonPressStartTime) < _longLongPressTime) {
+    if (buttonCurrentlyPressed && (millis() - buttonPressStartTime) >= BUTTON_LEADUP_MS) {
 
         // Start the progressive sequence if not already active
         if (!leadUpSequenceActive) {
@@ -150,13 +152,14 @@ int32_t ButtonThread::runOnce()
         else if ((millis() - lastLeadUpNoteTime) >= 400) { // 400ms interval between notes
             if (playNextLeadUpNote()) {
                 lastLeadUpNoteTime = millis();
+            } else {
+                leadUpPlayed = true;
             }
         }
     }
 
     // Reset when button is released
     if (!buttonCurrentlyPressed && buttonWasPressed) {
-        leadUpPlayed = false;
         leadUpSequenceActive = false;
         resetLeadUpSequence();
     }
@@ -253,12 +256,13 @@ int32_t ButtonThread::runOnce()
 
             LOG_INFO("LONG PRESS RELEASE AFTER %u MILLIS", millis() - buttonPressStartTime);
             if (millis() > 30000 && _longLongPress != INPUT_BROKER_NONE &&
-                (millis() - buttonPressStartTime) >= _longLongPressTime) {
+                (millis() - buttonPressStartTime) >= _longLongPressTime && leadUpPlayed) {
                 evt.inputEvent = _longLongPress;
                 this->notifyObservers(&evt);
             }
             // Reset combination tracking
             waitingForLongPress = false;
+            leadUpPlayed = false;
 
             break;
         }

src/input/ButtonThread.h

@@ -92,7 +92,7 @@ class ButtonThread : public Observable<const InputEvent *>, public concurrency::
 
     voidFuncPtr _intRoutine = nullptr;
     uint16_t _longPressTime = 500;
-    uint16_t _longLongPressTime = 5000;
+    uint16_t _longLongPressTime = 3900;
     int _pinNum = 0;
     bool _activeLow = true;
     bool _touchQuirk = false;

src/input/RotaryEncoderImpl.cpp

@@ -0,0 +1,73 @@
+#ifdef T_LORA_PAGER
+
+#include "RotaryEncoderImpl.h"
+#include "InputBroker.h"
+#include "RotaryEncoder.h"
+
+#define ORIGIN_NAME "RotaryEncoder"
+
+RotaryEncoderImpl *rotaryEncoderImpl;
+
+RotaryEncoderImpl::RotaryEncoderImpl() : concurrency::OSThread(ORIGIN_NAME), originName(ORIGIN_NAME)
+{
+    rotary = nullptr;
+}
+
+bool RotaryEncoderImpl::init()
+{
+    if (!moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.inputbroker_pin_a == 0 ||
+        moduleConfig.canned_message.inputbroker_pin_b == 0) {
+        // Input device is disabled.
+        disable();
+        return false;
+    }
+
+    eventCw = static_cast<input_broker_event>(moduleConfig.canned_message.inputbroker_event_cw);
+    eventCcw = static_cast<input_broker_event>(moduleConfig.canned_message.inputbroker_event_ccw);
+    eventPressed = static_cast<input_broker_event>(moduleConfig.canned_message.inputbroker_event_press);
+
+    rotary = new RotaryEncoder(moduleConfig.canned_message.inputbroker_pin_a, moduleConfig.canned_message.inputbroker_pin_b,
+                               moduleConfig.canned_message.inputbroker_pin_press);
+    rotary->resetButton();
+
+    inputBroker->registerSource(this);
+
+    LOG_INFO("RotaryEncoder initialized pins(%d, %d, %d), events(%d, %d, %d)", moduleConfig.canned_message.inputbroker_pin_a,
+             moduleConfig.canned_message.inputbroker_pin_b, moduleConfig.canned_message.inputbroker_pin_press, eventCw, eventCcw,
+             eventPressed);
+    return true;
+}
+
+int32_t RotaryEncoderImpl::runOnce()
+{
+    InputEvent e{originName, INPUT_BROKER_NONE, 0, 0, 0};
+    static uint32_t lastPressed = millis();
+    if (rotary->readButton() == RotaryEncoder::ButtonState::BUTTON_PRESSED) {
+        if (lastPressed + 200 < millis()) {
+            LOG_DEBUG("Rotary event Press");
+            lastPressed = millis();
+            e.inputEvent = this->eventPressed;
+        }
+    } else {
+        switch (rotary->process()) {
+        case RotaryEncoder::DIRECTION_CW:
+            LOG_DEBUG("Rotary event CW");
+            e.inputEvent = this->eventCw;
+            break;
+        case RotaryEncoder::DIRECTION_CCW:
+            LOG_DEBUG("Rotary event CCW");
+            e.inputEvent = this->eventCcw;
+            break;
+        default:
+            break;
+        }
+    }
+
+    if (e.inputEvent != INPUT_BROKER_NONE) {
+        this->notifyObservers(&e);
+    }
+
+    return 10;
+}
+
+#endif

src/input/RotaryEncoderImpl.h

@@ -0,0 +1,28 @@
+#pragma once
+
+// This is a non-interrupt version of RotaryEncoder which is based on a debounce inherent FSM table (see RotaryEncoder library)
+
+#include "InputBroker.h"
+#include "concurrency/OSThread.h"
+#include "mesh/NodeDB.h"
+
+class RotaryEncoder;
+
+class RotaryEncoderImpl : public Observable<const InputEvent *>, public concurrency::OSThread
+{
+  public:
+    RotaryEncoderImpl();
+    bool init(void);
+
+  protected:
+    virtual int32_t runOnce() override;
+
+    input_broker_event eventCw = INPUT_BROKER_NONE;
+    input_broker_event eventCcw = INPUT_BROKER_NONE;
+    input_broker_event eventPressed = INPUT_BROKER_NONE;
+
+    RotaryEncoder *rotary;
+    const char *originName;
+};
+
+extern RotaryEncoderImpl *rotaryEncoderImpl;

src/input/RotaryEncoderInterruptBase.cpp

@@ -18,14 +18,23 @@ void RotaryEncoderInterruptBase::init(
     this->_eventCcw = eventCcw;
     this->_eventPressed = eventPressed;
 
-    pinMode(pinPress, INPUT_PULLUP);
-    pinMode(this->_pinA, INPUT_PULLUP);
-    pinMode(this->_pinB, INPUT_PULLUP);
+    bool isRAK = false;
+#ifdef RAK_4631
+    isRAK = true;
+#endif
 
-    //    attachInterrupt(pinPress, onIntPress, RISING);
-    attachInterrupt(pinPress, onIntPress, RISING);
-    attachInterrupt(this->_pinA, onIntA, CHANGE);
-    attachInterrupt(this->_pinB, onIntB, CHANGE);
+    if (!isRAK || pinPress != 0) {
+        pinMode(pinPress, INPUT_PULLUP);
+        attachInterrupt(pinPress, onIntPress, RISING);
+    }
+    if (!isRAK || this->_pinA != 0) {
+        pinMode(this->_pinA, INPUT_PULLUP);
+        attachInterrupt(this->_pinA, onIntA, CHANGE);
+    }
+    if (!isRAK || this->_pinA != 0) {
+        pinMode(this->_pinB, INPUT_PULLUP);
+        attachInterrupt(this->_pinB, onIntB, CHANGE);
+    }
 
     this->rotaryLevelA = digitalRead(this->_pinA);
     this->rotaryLevelB = digitalRead(this->_pinB);

src/input/TLoraPagerKeyboard.cpp

@@ -0,0 +1,230 @@
+#if defined(T_LORA_PAGER)
+
+#include "TLoraPagerKeyboard.h"
+#include "main.h"
+
+#ifndef LEDC_BACKLIGHT_CHANNEL
+#define LEDC_BACKLIGHT_CHANNEL 4
+#endif
+
+#ifndef LEDC_BACKLIGHT_BIT_WIDTH
+#define LEDC_BACKLIGHT_BIT_WIDTH 8
+#endif
+
+#ifndef LEDC_BACKLIGHT_FREQ
+#define LEDC_BACKLIGHT_FREQ 1000 // Hz
+#endif
+
+#define _TCA8418_COLS 10
+#define _TCA8418_ROWS 4
+#define _TCA8418_NUM_KEYS 31
+
+#define _TCA8418_MULTI_TAP_THRESHOLD 1500
+
+using Key = TCA8418KeyboardBase::TCA8418Key;
+
+constexpr uint8_t modifierRightShiftKey = 29 - 1; // keynum -1
+constexpr uint8_t modifierRightShift = 0b0001;
+constexpr uint8_t modifierSymKey = 21 - 1;
+constexpr uint8_t modifierSym = 0b0010;
+
+// Num chars per key, Modulus for rotating through characters
+static uint8_t TLoraPagerTapMod[_TCA8418_NUM_KEYS] = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+                                                      3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3};
+
+static unsigned char TLoraPagerTapMap[_TCA8418_NUM_KEYS][3] = {{'q', 'Q', '1'},
+                                                               {'w', 'W', '2'},
+                                                               {'e', 'E', '3'},
+                                                               {'r', 'R', '4'},
+                                                               {'t', 'T', '5'},
+                                                               {'y', 'Y', '6'},
+                                                               {'u', 'U', '7'},
+                                                               {'i', 'I', '8'},
+                                                               {'o', 'O', '9'},
+                                                               {'p', 'P', '0'},
+                                                               {'a', 'A', '*'},
+                                                               {'s', 'S', '/'},
+                                                               {'d', 'D', '+'},
+                                                               {'f', 'F', '-'},
+                                                               {'g', 'G', '='},
+                                                               {'h', 'H', ':'},
+                                                               {'j', 'J', '\''},
+                                                               {'k', 'K', '"'},
+                                                               {'l', 'L', '@'},
+                                                               {Key::SELECT, 0x00, Key::TAB},
+                                                               {0x00, 0x00, 0x00},
+                                                               {'z', 'Z', '_'},
+                                                               {'x', 'X', '$'},
+                                                               {'c', 'C', ';'},
+                                                               {'v', 'V', '?'},
+                                                               {'b', 'B', '!'},
+                                                               {'n', 'N', ','},
+                                                               {'m', 'M', '.'},
+                                                               {0x00, 0x00, 0x00},
+                                                               {Key::BSP, 0x00, Key::ESC},
+                                                               {' ', 0x00, Key::BL_TOGGLE}};
+
+TLoraPagerKeyboard::TLoraPagerKeyboard()
+    : TCA8418KeyboardBase(_TCA8418_ROWS, _TCA8418_COLS), modifierFlag(0), last_modifier_time(0), last_key(-1), next_key(-1),
+      last_tap(0L), char_idx(0), tap_interval(0)
+{
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
+    ledcAttach(KB_BL_PIN, LEDC_BACKLIGHT_FREQ, LEDC_BACKLIGHT_BIT_WIDTH);
+#else
+    ledcSetup(LEDC_BACKLIGHT_CHANNEL, LEDC_BACKLIGHT_FREQ, LEDC_BACKLIGHT_BIT_WIDTH);
+    ledcAttachPin(KB_BL_PIN, LEDC_BACKLIGHT_CHANNEL);
+#endif
+    reset();
+}
+
+void TLoraPagerKeyboard::reset(void)
+{
+    TCA8418KeyboardBase::reset();
+    pinMode(KB_BL_PIN, OUTPUT);
+    digitalWrite(KB_BL_PIN, LOW);
+    setBacklight(false);
+}
+
+// handle multi-key presses (shift and alt)
+void TLoraPagerKeyboard::trigger()
+{
+    uint8_t count = keyCount();
+    if (count == 0)
+        return;
+    for (uint8_t i = 0; i < count; ++i) {
+        uint8_t k = readRegister(TCA8418_REG_KEY_EVENT_A + i);
+        uint8_t key = k & 0x7F;
+        if (k & 0x80) {
+            pressed(key);
+        } else {
+            released();
+            state = Idle;
+        }
+    }
+}
+
+void TLoraPagerKeyboard::setBacklight(bool on)
+{
+    toggleBacklight(!on);
+}
+
+void TLoraPagerKeyboard::pressed(uint8_t key)
+{
+    if (state == Init || state == Busy) {
+        return;
+    }
+    if (config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_ALL_ENABLED ||
+        config.device.buzzer_mode == meshtastic_Config_DeviceConfig_BuzzerMode_SYSTEM_ONLY) {
+        hapticFeedback();
+    }
+
+    if (modifierFlag && (millis() - last_modifier_time > _TCA8418_MULTI_TAP_THRESHOLD)) {
+        modifierFlag = 0;
+    }
+
+    uint8_t next_key = 0;
+    int row = (key - 1) / 10;
+    int col = (key - 1) % 10;
+
+    if (row >= _TCA8418_ROWS || col >= _TCA8418_COLS) {
+        return; // Invalid key
+    }
+
+    next_key = row * _TCA8418_COLS + col;
+    state = Held;
+
+    uint32_t now = millis();
+    tap_interval = now - last_tap;
+
+    updateModifierFlag(next_key);
+    if (isModifierKey(next_key)) {
+        last_modifier_time = now;
+    }
+
+    if (tap_interval < 0) {
+        last_tap = 0;
+        state = Busy;
+        return;
+    }
+
+    if (next_key != last_key || tap_interval > _TCA8418_MULTI_TAP_THRESHOLD) {
+        char_idx = 0;
+    } else {
+        char_idx += 1;
+    }
+
+    last_key = next_key;
+    last_tap = now;
+}
+
+void TLoraPagerKeyboard::released()
+{
+    if (state != Held) {
+        return;
+    }
+
+    if (last_key < 0 || last_key >= _TCA8418_NUM_KEYS) {
+        last_key = -1;
+        state = Idle;
+        return;
+    }
+
+    uint32_t now = millis();
+    last_tap = now;
+
+    if (TLoraPagerTapMap[last_key][modifierFlag % TLoraPagerTapMod[last_key]] == Key::BL_TOGGLE) {
+        toggleBacklight();
+        return;
+    }
+
+    queueEvent(TLoraPagerTapMap[last_key][modifierFlag % TLoraPagerTapMod[last_key]]);
+    if (isModifierKey(last_key) == false)
+        modifierFlag = 0;
+}
+
+void TLoraPagerKeyboard::hapticFeedback()
+{
+    drv.setWaveform(0, 14); // strong buzz 100%
+    drv.setWaveform(1, 0);  // end waveform
+    drv.go();
+}
+
+// toggle brightness of the backlight in three steps
+void TLoraPagerKeyboard::toggleBacklight(bool off)
+{
+    static uint32_t brightness = 0;
+    if (off) {
+        brightness = 0;
+    } else {
+        if (brightness == 0) {
+            brightness = 40;
+        } else if (brightness == 40) {
+            brightness = 127;
+        } else if (brightness >= 127) {
+            brightness = 0;
+        }
+    }
+    LOG_DEBUG("Toggle backlight: %d", brightness);
+
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0)
+    ledcWrite(KB_BL_PIN, brightness);
+#else
+    ledcWrite(LEDC_BACKLIGHT_CHANNEL, brightness);
+#endif
+}
+
+void TLoraPagerKeyboard::updateModifierFlag(uint8_t key)
+{
+    if (key == modifierRightShiftKey) {
+        modifierFlag ^= modifierRightShift;
+    } else if (key == modifierSymKey) {
+        modifierFlag ^= modifierSym;
+    }
+}
+
+bool TLoraPagerKeyboard::isModifierKey(uint8_t key)
+{
+    return (key == modifierRightShiftKey || key == modifierSymKey);
+}
+
+#endif

src/input/TLoraPagerKeyboard.h

@@ -4,9 +4,26 @@ class TLoraPagerKeyboard : public TCA8418KeyboardBase
 {
   public:
     TLoraPagerKeyboard();
-    void setBacklight(bool on) override{};
+    void reset(void);
+    void trigger(void) override;
+    void setBacklight(bool on) override;
+    virtual ~TLoraPagerKeyboard() {}
 
   protected:
-    void pressed(uint8_t key) override{};
-    void released(void) override{};
+    void pressed(uint8_t key) override;
+    void released(void) override;
+    void hapticFeedback(void);
+
+    void updateModifierFlag(uint8_t key);
+    bool isModifierKey(uint8_t key);
+    void toggleBacklight(bool off = false);
+
+  private:
+    uint8_t modifierFlag;        // Flag to indicate if a modifier key is pressed
+    uint32_t last_modifier_time; // Timestamp of the last modifier key press
+    int8_t last_key;
+    int8_t next_key;
+    uint32_t last_tap;
+    uint8_t char_idx;
+    int32_t tap_interval;
 };

src/input/UpDownInterruptBase.cpp

@@ -15,14 +15,23 @@ void UpDownInterruptBase::init(uint8_t pinDown, uint8_t pinUp, uint8_t pinPress,
     this->_eventDown = eventDown;
     this->_eventUp = eventUp;
     this->_eventPressed = eventPressed;
+    bool isRAK = false;
+#ifdef RAK_4631
+    isRAK = true;
+#endif
 
-    pinMode(pinPress, INPUT_PULLUP);
-    pinMode(this->_pinDown, INPUT_PULLUP);
-    pinMode(this->_pinUp, INPUT_PULLUP);
-
-    attachInterrupt(pinPress, onIntPress, RISING);
-    attachInterrupt(this->_pinDown, onIntDown, RISING);
-    attachInterrupt(this->_pinUp, onIntUp, RISING);
+    if (!isRAK || pinPress != 0) {
+        pinMode(pinPress, INPUT_PULLUP);
+        attachInterrupt(pinPress, onIntPress, RISING);
+    }
+    if (!isRAK || this->_pinDown != 0) {
+        pinMode(this->_pinDown, INPUT_PULLUP);
+        attachInterrupt(this->_pinDown, onIntDown, RISING);
+    }
+    if (!isRAK || this->_pinUp != 0) {
+        pinMode(this->_pinUp, INPUT_PULLUP);
+        attachInterrupt(this->_pinUp, onIntUp, RISING);
+    }
 
     LOG_DEBUG("Up/down/press GPIO initialized (%d, %d, %d)", this->_pinUp, this->_pinDown, pinPress);
 

src/input/cardKbI2cImpl.cpp

@@ -12,8 +12,12 @@ void CardKbI2cImpl::init()
 #if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(I2C_NO_RESCAN)
     if (cardkb_found.address == 0x00) {
         LOG_DEBUG("Rescan for I2C keyboard");
-        uint8_t i2caddr_scan[] = {CARDKB_ADDR, TDECK_KB_ADDR, BBQ10_KB_ADDR, MPR121_KB_ADDR, XPOWERS_AXP192_AXP2101_ADDRESS};
+        uint8_t i2caddr_scan[] = {CARDKB_ADDR, TDECK_KB_ADDR, BBQ10_KB_ADDR, MPR121_KB_ADDR, TCA8418_KB_ADDR};
+#if defined(T_LORA_PAGER)
+        uint8_t i2caddr_asize = sizeof(i2caddr_scan) / sizeof(i2caddr_scan[0]);
+#else
         uint8_t i2caddr_asize = 5;
+#endif
         auto i2cScanner = std::unique_ptr<ScanI2CTwoWire>(new ScanI2CTwoWire());
 
 #if WIRE_INTERFACES_COUNT == 2

src/main.cpp

@@ -135,8 +135,9 @@ AccelerometerThread *accelerometerThread = nullptr;
 AudioThread *audioThread = nullptr;
 #endif
 
-#ifdef USE_PCA9557
-PCA9557 IOEXP;
+#ifdef USE_XL9555
+#include "ExtensionIOXL9555.hpp"
+ExtensionIOXL9555 io;
 #endif
 
 #if HAS_TFT
@@ -201,7 +202,7 @@ ScanI2C::FoundDevice rgb_found = ScanI2C::FoundDevice(ScanI2C::DeviceType::NONE,
 /// The I2C address of our Air Quality Indicator (if found)
 ScanI2C::DeviceAddress aqi_found = ScanI2C::ADDRESS_NONE;
 
-#ifdef T_WATCH_S3
+#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
 Adafruit_DRV2605 drv;
 #endif
 
@@ -304,7 +305,6 @@ void setup()
     Wire.begin(48, 47);
     io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
     io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
-    io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
     io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
     // io.pinMode(C2_PIN, OUTPUT);
 #endif
@@ -326,8 +326,12 @@ void setup()
 
 #ifdef BLE_LED
     pinMode(BLE_LED, OUTPUT);
+#ifdef BLE_LED_INVERTED
+    digitalWrite(BLE_LED, HIGH);
+#else
     digitalWrite(BLE_LED, LOW);
 #endif
+#endif
 
 #if defined(T_DECK)
     // GPIO10 manages all peripheral power supplies
@@ -356,6 +360,30 @@ void setup()
     digitalWrite(SDCARD_CS, HIGH);
     pinMode(PIN_EINK_CS, OUTPUT);
     digitalWrite(PIN_EINK_CS, HIGH);
+#elif defined(T_LORA_PAGER)
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    // io expander
+    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
+    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
+    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
+    io.pinMode(EXPANDS_KB_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.pinMode(EXPANDS_SD_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
 #endif
 
     concurrency::hasBeenSetup = true;
@@ -391,7 +419,7 @@ void setup()
     struct timeval tv;
     tv.tv_sec = time(NULL);
     tv.tv_usec = 0;
-    perhapsSetRTC(RTCQualityNTP, &tv);
+    perhapsSetRTC(RTCQualityDevice, &tv);
 #endif
 
     powerMonInit();
@@ -401,6 +429,16 @@ void setup()
 
     initDeepSleep();
 
+#if defined(MODEM_POWER_EN)
+    pinMode(MODEM_POWER_EN, OUTPUT);
+    digitalWrite(MODEM_POWER_EN, LOW);
+#endif
+
+#if defined(MODEM_PWRKEY)
+    pinMode(MODEM_PWRKEY, OUTPUT);
+    digitalWrite(MODEM_PWRKEY, LOW);
+#endif
+
 #if defined(LORA_TCXO_GPIO)
     pinMode(LORA_TCXO_GPIO, OUTPUT);
     digitalWrite(LORA_TCXO_GPIO, HIGH);
@@ -703,6 +741,7 @@ void setup()
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::RAK12035, meshtastic_TelemetrySensorType_RAK12035);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::PCT2075, meshtastic_TelemetrySensorType_PCT2075);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SCD4X, meshtastic_TelemetrySensorType_SCD4X);
+    scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::TSL2561, meshtastic_TelemetrySensorType_TSL2561);
 
     i2cScanner.reset();
 #endif
@@ -792,7 +831,7 @@ void setup()
 #endif
 #endif
 
-#ifdef T_WATCH_S3
+#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
     drv.begin();
     drv.selectLibrary(1);
     // I2C trigger by sending 'go' command
@@ -838,7 +877,7 @@ void setup()
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
 
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
-    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS)
+    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS)
         screen = new graphics::Screen(screen_found, screen_model, screen_geometry);
 #elif defined(ARCH_PORTDUINO)
         if ((screen_found.port != ScanI2C::I2CPort::NO_I2C || settingsMap[displayPanel]) &&
@@ -1101,7 +1140,7 @@ void setup()
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
-    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS)
+    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS)
     if (screen)
         screen->setup();
 #elif defined(ARCH_PORTDUINO)
@@ -1487,7 +1526,7 @@ extern meshtastic_DeviceMetadata getDeviceMetadata()
 #if ((!HAS_SCREEN || NO_EXT_GPIO) || MESHTASTIC_EXCLUDE_CANNEDMESSAGES) && !defined(MESHTASTIC_INCLUDE_NICHE_GRAPHICS)
     deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_CANNEDMSG_CONFIG;
 #endif
-#if NO_EXT_GPIO
+#if NO_EXT_GPIO || MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
     deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_EXTNOTIF_CONFIG;
 #endif
 // Only edge case here is if we apply this a device with built in Accelerometer and want to detect interrupts
@@ -1559,7 +1598,13 @@ void loop()
 #endif
 
     service->loop();
-
+#if defined(LGFX_SDL)
+    if (screen) {
+        auto dispdev = screen->getDisplayDevice();
+        if (dispdev)
+            static_cast<TFTDisplay *>(dispdev)->sdlLoop();
+    }
+#endif
     long delayMsec = mainController.runOrDelay();
 
     // We want to sleep as long as possible here - because it saves power

src/main.h

@@ -41,7 +41,7 @@ extern bool eink_found;
 extern bool pmu_found;
 extern bool isUSBPowered;
 
-#ifdef T_WATCH_S3
+#if defined(T_WATCH_S3) || defined(T_LORA_PAGER)
 #include <Adafruit_DRV2605.h>
 extern Adafruit_DRV2605 drv;
 #endif

src/mesh/Channels.cpp

@@ -368,7 +368,7 @@ const char *Channels::getName(size_t chIndex)
         // Per mesh.proto spec, if bandwidth is specified we must ignore modemPreset enum, we assume that in that case
         // the app effed up and forgot to set channelSettings.name
         if (config.lora.use_preset) {
-            channelName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
+            channelName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
         } else {
             channelName = "Custom";
         }
@@ -382,7 +382,8 @@ bool Channels::isDefaultChannel(ChannelIndex chIndex)
     const auto &ch = getByIndex(chIndex);
     if (ch.settings.psk.size == 1 && ch.settings.psk.bytes[0] == 1) {
         const char *name = getName(chIndex);
-        const char *presetName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
+        const char *presetName =
+            DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
         // Check if the name is the default derived from the modem preset
         if (strcmp(name, presetName) == 0)
             return true;

src/mesh/FloodingRouter.cpp

@@ -47,8 +47,10 @@ void FloodingRouter::perhapsCancelDupe(const meshtastic_MeshPacket *p)
 {
     if (config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER &&
         config.device.role != meshtastic_Config_DeviceConfig_Role_REPEATER &&
-        config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER_LATE) {
+        config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER_LATE &&
+        p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA) {
         // cancel rebroadcast of this message *if* there was already one, unless we're a router/repeater!
+        // But only LoRa packets should be able to trigger this.
         if (Router::cancelSending(p->from, p->id))
             txRelayCanceled++;
     }

src/mesh/LR11x0Interface.cpp

@@ -6,6 +6,10 @@
 #include "mesh/NodeDB.h"
 #ifdef LR11X0_DIO_AS_RF_SWITCH
 #include "rfswitch.h"
+#elif ARCH_PORTDUINO
+#include "PortduinoGlue.h"
+#define rfswitch_dio_pins portduino_config.rfswitch_dio_pins
+#define rfswitch_table portduino_config.rfswitch_table
 #else
 static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
 static const Module::RfSwitchMode_t rfswitch_table[] = {
@@ -14,10 +18,6 @@ static const Module::RfSwitchMode_t rfswitch_table[] = {
 };
 #endif
 
-#ifdef ARCH_PORTDUINO
-#include "PortduinoGlue.h"
-#endif
-
 // Particular boards might define a different max power based on what their hardware can do, default to max power output if not
 // specified (may be dangerous if using external PA and LR11x0 power config forgotten)
 #if ARCH_PORTDUINO
@@ -117,17 +117,14 @@ template <typename T> bool LR11x0Interface<T>::init()
 #ifdef LR11X0_DIO_AS_RF_SWITCH
     bool dioAsRfSwitch = true;
 #elif defined(ARCH_PORTDUINO)
-    bool dioAsRfSwitch = false;
-    if (settingsMap[dio2_as_rf_switch]) {
-        dioAsRfSwitch = true;
-    }
+    bool dioAsRfSwitch = portduino_config.has_rfswitch_table;
 #else
     bool dioAsRfSwitch = false;
 #endif
 
     if (dioAsRfSwitch) {
         lora.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
-        LOG_DEBUG("Set DIO RF switch", res);
+        LOG_DEBUG("Set DIO RF switch");
     }
 
     if (res == RADIOLIB_ERR_NONE) {

src/mesh/MeshModule.cpp

@@ -100,6 +100,7 @@ void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src)
     // Was this message directed to us specifically?  Will be false if we are sniffing someone elses packets
     auto ourNodeNum = nodeDB->getNodeNum();
     bool toUs = isBroadcast(mp.to) || isToUs(&mp);
+    bool fromUs = mp.from == ourNodeNum;
 
     for (auto i = modules->begin(); i != modules->end(); ++i) {
         auto &pi = **i;

src/mesh/NextHopRouter.cpp

@@ -34,8 +34,11 @@ bool NextHopRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
     bool weWereNextHop = false;
     if (wasSeenRecently(p, true, &wasFallback, &weWereNextHop)) { // Note: this will also add a recent packet record
         printPacket("Ignore dupe incoming msg", p);
-        rxDupe++;
-        stopRetransmission(p->from, p->id);
+
+        if (p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA) {
+            rxDupe++;
+            stopRetransmission(p->from, p->id);
+        }
 
         // If it was a fallback to flooding, try to relay again
         if (wasFallback) {
@@ -71,10 +74,11 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
         if (p->from != 0) {
             meshtastic_NodeInfoLite *origTx = nodeDB->getMeshNode(p->from);
             if (origTx) {
-                // Either relayer of ACK was also a relayer of the packet, or we were the relayer and the ACK came directly from
-                // the destination
+                // Either relayer of ACK was also a relayer of the packet, or we were the *only* relayer and the ACK came directly
+                // from the destination
                 if (wasRelayer(p->relay_node, p->decoded.request_id, p->to) ||
-                    (wasRelayer(ourRelayID, p->decoded.request_id, p->to) && p->hop_start != 0 && p->hop_start == p->hop_limit)) {
+                    (p->hop_start != 0 && p->hop_start == p->hop_limit &&
+                     wasSoleRelayer(ourRelayID, p->decoded.request_id, p->to))) {
                     if (origTx->next_hop != p->relay_node) { // Not already set
                         LOG_INFO("Update next hop of 0x%x to 0x%x based on ACK/reply", p->from, p->relay_node);
                         origTx->next_hop = p->relay_node;

src/mesh/NodeDB.cpp

@@ -225,7 +225,11 @@ NodeDB::NodeDB()
     memcpy(myNodeInfo.device_id.bytes + sizeof(device_id_start), &device_id_end, sizeof(device_id_end));
     myNodeInfo.device_id.size = 16;
     // Uncomment below to print the device id
-
+#elif ARCH_PORTDUINO
+    if (portduino_config.has_device_id) {
+        memcpy(myNodeInfo.device_id.bytes, portduino_config.device_id, 16);
+        myNodeInfo.device_id.size = 16;
+    }
 #else
     // FIXME - implement for other platforms
 #endif
@@ -659,7 +663,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.bluetooth.fixed_pin = defaultBLEPin;
 
 #if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||       \
-    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS)
+    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS)
     bool hasScreen = true;
 #ifdef HELTEC_MESH_NODE_T114
     uint32_t st7789_id = get_st7789_id(ST7789_NSS, ST7789_SCK, ST7789_SDA, ST7789_RS, ST7789_RESET);
@@ -826,6 +830,15 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.external_notification.alert_message = true;
     moduleConfig.external_notification.output_ms = 1000;
     moduleConfig.external_notification.nag_timeout = 60;
+#endif
+#ifdef T_LORA_PAGER
+    moduleConfig.canned_message.updown1_enabled = true;
+    moduleConfig.canned_message.inputbroker_pin_a = ROTARY_A;
+    moduleConfig.canned_message.inputbroker_pin_b = ROTARY_B;
+    moduleConfig.canned_message.inputbroker_pin_press = ROTARY_PRESS;
+    moduleConfig.canned_message.inputbroker_event_cw = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar(28);
+    moduleConfig.canned_message.inputbroker_event_ccw = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar(29);
+    moduleConfig.canned_message.inputbroker_event_press = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
 #endif
     moduleConfig.has_canned_message = true;
 #if USERPREFS_MQTT_ENABLED && !MESHTASTIC_EXCLUDE_MQTT
@@ -1631,24 +1644,33 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde
         printBytes("Incoming Pubkey: ", p.public_key.bytes, 32);
 
         // Alert the user if a remote node is advertising public key that matches our own
-        if (owner.public_key.size == 32 && memcmp(p.public_key.bytes, owner.public_key.bytes, 32) == 0 && !duplicateWarned) {
-            duplicateWarned = true;
-            char warning[] = "Remote device %s has advertised your public key. This may indicate a compromised key. You may need "
-                             "to regenerate your public keys.";
-            LOG_WARN(warning, p.long_name);
-            meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
-            cn->level = meshtastic_LogRecord_Level_WARNING;
-            cn->time = getValidTime(RTCQualityFromNet);
-            sprintf(cn->message, warning, p.long_name);
-            service->sendClientNotification(cn);
+        if (owner.public_key.size == 32 && memcmp(p.public_key.bytes, owner.public_key.bytes, 32) == 0) {
+            if (!duplicateWarned) {
+                duplicateWarned = true;
+                char warning[] =
+                    "Remote device %s has advertised your public key. This may indicate a compromised key. You may need "
+                    "to regenerate your public keys.";
+                LOG_WARN(warning, p.long_name);
+                meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
+                cn->level = meshtastic_LogRecord_Level_WARNING;
+                cn->time = getValidTime(RTCQualityFromNet);
+                sprintf(cn->message, warning, p.long_name);
+                service->sendClientNotification(cn);
+            }
+            return false;
         }
     }
-    if (info->user.public_key.size > 0) { // if we have a key for this user already, don't overwrite with a new one
+    if (info->user.public_key.size == 32) { // if we have a key for this user already, don't overwrite with a new one
+        // if the key doesn't match, don't update nodeDB at all.
+        if (p.public_key.size != 32 || (memcmp(p.public_key.bytes, info->user.public_key.bytes, 32) != 0)) {
+            LOG_WARN("Public Key mismatch, dropping NodeInfo");
+            return false;
+        }
         LOG_INFO("Public Key set for node, not updating!");
         // we copy the key into the incoming packet, to prevent overwrite
         p.public_key.size = 32;
         memcpy(p.public_key.bytes, info->user.public_key.bytes, 32);
-    } else if (p.public_key.size > 0) {
+    } else if (p.public_key.size == 32) {
         LOG_INFO("Update Node Pubkey!");
     }
 #endif
@@ -1689,10 +1711,10 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde
 /// we updateGUI and updateGUIforNode if we think our this change is big enough for a redraw
 void NodeDB::updateFrom(const meshtastic_MeshPacket &mp)
 {
-    // if (mp.from == getNodeNum()) {
-    //     LOG_DEBUG("Ignore update from self");
-    //     return;
-    // }
+    if (mp.from == getNodeNum()) {
+        LOG_DEBUG("Ignore update from self");
+        return;
+    }
     if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag && mp.from) {
         LOG_DEBUG("Update DB node 0x%x, rx_time=%u", mp.from, mp.rx_time);
 
@@ -1867,7 +1889,7 @@ bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_pub
         uint8_t keyHash[32] = {0};
         memcpy(keyHash, keyToTest.bytes, keyToTest.size);
         crypto->hash(keyHash, 32);
-        for (int i = 0; i < sizeof(LOW_ENTROPY_HASHES) / sizeof(LOW_ENTROPY_HASHES[0]); i++) {
+        for (uint16_t i = 0; i < sizeof(LOW_ENTROPY_HASHES) / sizeof(LOW_ENTROPY_HASHES[0]); i++) {
             if (memcmp(keyHash, LOW_ENTROPY_HASHES[i], sizeof(LOW_ENTROPY_HASHES[0])) == 0) {
                 return true;
             }

src/mesh/PacketHistory.cpp

@@ -294,7 +294,7 @@ void PacketHistory::insert(const PacketRecord &r)
 
 /* Check if a certain node was a relayer of a packet in the history given an ID and sender
  * @return true if node was indeed a relayer, false if not */
-bool PacketHistory::wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender)
+bool PacketHistory::wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender, bool *wasSole)
 {
     if (!initOk()) {
         LOG_ERROR("PacketHistory - wasRelayer: NOT INITIALIZED!");
@@ -322,27 +322,42 @@ bool PacketHistory::wasRelayer(const uint8_t relayer, const uint32_t id, const N
               found->sender, found->id, found->next_hop, millis() - found->rxTimeMsec, found->relayed_by[0], found->relayed_by[1],
               found->relayed_by[2], relayer);
 #endif
-    return wasRelayer(relayer, *found);
+    return wasRelayer(relayer, *found, wasSole);
 }
 
 /* Check if a certain node was a relayer of a packet in the history given iterator
  * @return true if node was indeed a relayer, false if not */
-bool PacketHistory::wasRelayer(const uint8_t relayer, const PacketRecord &r)
+bool PacketHistory::wasRelayer(const uint8_t relayer, const PacketRecord &r, bool *wasSole)
 {
-    for (uint8_t i = 0; i < NUM_RELAYERS; i++) {
+    bool found = false;
+    bool other_present = false;
+
+    for (uint8_t i = 0; i < NUM_RELAYERS; ++i) {
         if (r.relayed_by[i] == relayer) {
-#if VERBOSE_PACKET_HISTORY
-            LOG_DEBUG("Packet History - was rel.PR.: s=%08x id=%08x rls=%02x %02x %02x / rl=%02x? YES", r.sender, r.id,
-                      r.relayed_by[0], r.relayed_by[1], r.relayed_by[2], relayer);
-#endif
-            return true;
+            found = true;
+        } else if (r.relayed_by[i] != 0) {
+            other_present = true;
         }
     }
+
+    if (wasSole) {
+        *wasSole = (found && !other_present);
+    }
+
 #if VERBOSE_PACKET_HISTORY
     LOG_DEBUG("Packet History - was rel.PR.: s=%08x id=%08x rls=%02x %02x %02x / rl=%02x? NO", r.sender, r.id, r.relayed_by[0],
               r.relayed_by[1], r.relayed_by[2], relayer);
 #endif
-    return false;
+
+    return found;
+}
+
+// Check if a certain node was the *only* relayer of a packet in the history given an ID and sender
+bool PacketHistory::wasSoleRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender)
+{
+    bool wasSole = false;
+    wasRelayer(relayer, id, sender, &wasSole);
+    return wasSole;
 }
 
 // Remove a relayer from the list of relayers of a packet in the history given an ID and sender

src/mesh/PacketHistory.h

@@ -34,8 +34,9 @@ class PacketHistory
     void insert(const PacketRecord &r); // Insert or replace a packet record in the history
 
     /* Check if a certain node was a relayer of a packet in the history given iterator
+     * If wasSole is not nullptr, it will be set to true if the relayer was the only relayer of that packet
      * @return true if node was indeed a relayer, false if not */
-    bool wasRelayer(const uint8_t relayer, const PacketRecord &r);
+    bool wasRelayer(const uint8_t relayer, const PacketRecord &r, bool *wasSole = nullptr);
 
     PacketHistory(const PacketHistory &);            // non construction-copyable
     PacketHistory &operator=(const PacketHistory &); // non copyable
@@ -54,8 +55,12 @@ class PacketHistory
                          bool *weWereNextHop = nullptr);
 
     /* Check if a certain node was a relayer of a packet in the history given an ID and sender
+     * If wasSole is not nullptr, it will be set to true if the relayer was the only relayer of that packet
      * @return true if node was indeed a relayer, false if not */
-    bool wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);
+    bool wasRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender, bool *wasSole = nullptr);
+
+    // Check if a certain node was the *only* relayer of a packet in the history given an ID and sender
+    bool wasSoleRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);
 
     // Remove a relayer from the list of relayers of a packet in the history given an ID and sender
     void removeRelayer(const uint8_t relayer, const uint32_t id, const NodeNum sender);

src/mesh/PhoneAPI.cpp

@@ -192,12 +192,6 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength)
 
 size_t PhoneAPI::getFromRadio(uint8_t *buf)
 {
-    if (!available()) {
-        return 0;
-    }
-    // In case we send a FromRadio packet
-    memset(&fromRadioScratch, 0, sizeof(fromRadioScratch));
-
     // Respond to heartbeat by sending queue status
     if (heartbeatReceived) {
         memset(&fromRadioScratch, 0, sizeof(fromRadioScratch));
@@ -209,6 +203,12 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
         return numbytes;
     }
 
+    if (!available()) {
+        return 0;
+    }
+    // In case we send a FromRadio packet
+    memset(&fromRadioScratch, 0, sizeof(fromRadioScratch));
+
     // Advance states as needed
     switch (state) {
     case STATE_SEND_NOTHING:

src/mesh/RadioInterface.cpp

@@ -170,11 +170,10 @@ const RegionInfo regions[] = {
     */
     RDEF(KZ_433, 433.075f, 434.775f, 100, 0, 10, true, false, false), RDEF(KZ_863, 863.0f, 868.0f, 100, 0, 30, true, false, true),
 
-
     /*
         Nepal
-        865 MHz to 868 MHz frequency band for IoT (Internet of Things), M2M (Machine-to-Machine), and smart metering use, specifically in non-cellular mode.
-        https://www.nta.gov.np/uploads/contents/Radio-Frequency-Policy-2080-English.pdf
+        865 MHz to 868 MHz frequency band for IoT (Internet of Things), M2M (Machine-to-Machine), and smart metering use,
+       specifically in non-cellular mode. https://www.nta.gov.np/uploads/contents/Radio-Frequency-Policy-2080-English.pdf
     */
     RDEF(NP_865, 865.0f, 868.0f, 100, 0, 30, true, false, false),
 
@@ -336,8 +335,9 @@ uint32_t RadioInterface::getTxDelayMsecWeighted(float snr)
 void printPacket(const char *prefix, const meshtastic_MeshPacket *p)
 {
 #if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
-    std::string out = DEBUG_PORT.mt_sprintf("%s (id=0x%08x fr=0x%08x to=0x%08x, WantAck=%d, HopLim=%d Ch=0x%x", prefix, p->id,
-                                            p->from, p->to, p->want_ack, p->hop_limit, p->channel);
+    std::string out =
+        DEBUG_PORT.mt_sprintf("%s (id=0x%08x fr=0x%08x to=0x%08x, transport = %u, WantAck=%d, HopLim=%d Ch=0x%x", prefix, p->id,
+                              p->from, p->to, p->transport_mechanism, p->want_ack, p->hop_limit, p->channel);
     if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
         auto &s = p->decoded;
 
@@ -586,7 +586,8 @@ void RadioInterface::applyModemConfig()
 
     // Check if we use the default frequency slot
     RadioInterface::uses_default_frequency_slot =
-        channel_num == hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false)) % numChannels;
+        channel_num ==
+        hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset)) % numChannels;
 
     // Old frequency selection formula
     // float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);
@@ -666,8 +667,10 @@ void RadioInterface::limitPower(int8_t loraMaxPower)
 
 void RadioInterface::deliverToReceiver(meshtastic_MeshPacket *p)
 {
-    if (router)
+    if (router) {
+        p->transport_mechanism = meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA;
         router->enqueueReceivedMessage(p);
+    }
 }
 
 /***

src/mesh/ReliableRouter.cpp

@@ -58,7 +58,10 @@ bool ReliableRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
             // marked as wantAck
             sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, old->packet->channel);
 
-            stopRetransmission(key);
+            // Only stop retransmissions if the rebroadcast came via LoRa
+            if (p->transport_mechanism == meshtastic_MeshPacket_TransportMechanism_TRANSPORT_LORA) {
+                stopRetransmission(key);
+            }
         } else {
             LOG_DEBUG("Didn't find pending packet");
         }

src/mesh/Router.cpp

@@ -523,12 +523,15 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
         // is not in the local nodedb
         // First, only PKC encrypt packets we are originating
         if (isFromUs(p) &&
-            // Don't use PKC with simulator
-            radioType != SIM_RADIO &&
+#if ARCH_PORTDUINO
+            // Sim radio via the cli flag skips PKC
+            !portduino_config.force_simradio &&
+#endif
             // Don't use PKC with Ham mode
             !owner.is_licensed &&
-            // Don't use PKC if it's not explicitly requested and a non-primary channel is requested
-            !(p->pki_encrypted != true && p->channel > 0) &&
+            // Don't use PKC on 'serial' or 'gpio' channels unless explicitly requested
+            !(p->pki_encrypted != true && (strcasecmp(channels.getName(chIndex), Channels::serialChannel) == 0 ||
+                                           strcasecmp(channels.getName(chIndex), Channels::gpioChannel) == 0)) &&
             // Check for valid keys and single node destination
             config.security.private_key.size == 32 && !isBroadcast(p->to) && node != nullptr &&
             // Check for a known public key for the destination
@@ -559,7 +562,7 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
             // Now that we are encrypting the packet channel should be the hash (no longer the index)
             p->channel = hash;
             if (hash < 0) {
-                // No suitable channel could be found for sending
+                // No suitable channel could be found for
                 return meshtastic_Routing_Error_NO_CHANNEL;
             }
             crypto->encryptPacket(getFrom(p), p->id, numbytes, bytes);
@@ -575,7 +578,7 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p)
         // Now that we are encrypting the packet channel should be the hash (no longer the index)
         p->channel = hash;
         if (hash < 0) {
-            // No suitable channel could be found for sending
+            // No suitable channel could be found for
             return meshtastic_Routing_Error_NO_CHANNEL;
         }
         crypto->encryptPacket(getFrom(p), p->id, numbytes, bytes);
@@ -652,7 +655,8 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
     }
 
     // call modules here
-    if (!skipHandle) {
+    // If this could be a spoofed packet, don't let the modules see it.
+    if (!skipHandle && p->from != nodeDB->getNodeNum()) {
         MeshModule::callModules(*p, src);
 
 #if !MESHTASTIC_EXCLUDE_MQTT
@@ -666,6 +670,8 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
             !isFromUs(p) && mqtt)
             mqtt->onSend(*p_encrypted, *p, p->channel);
 #endif
+    } else if (p->from == nodeDB->getNodeNum() && !skipHandle) {
+        MeshModule::callModules(*p, src);
     }
 
     packetPool.release(p_encrypted); // Release the encrypted packet

src/mesh/STM32WLE5JCInterface.cpp

@@ -1,13 +1,13 @@
-#include "STM32WLE5JCInterface.h"
 #include "configuration.h"
+
+#ifdef ARCH_STM32WL
+#include "STM32WLE5JCInterface.h"
 #include "error.h"
 
 #ifndef STM32WLx_MAX_POWER
 #define STM32WLx_MAX_POWER 22
 #endif
 
-#ifdef ARCH_STM32WL
-
 STM32WLE5JCInterface::STM32WLE5JCInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq,
                                            RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy)
     : SX126xInterface(hal, cs, irq, rst, busy)

src/mesh/STM32WLE5JCInterface.h

@@ -1,8 +1,8 @@
 #pragma once
 
-#include "SX126xInterface.h"
-
 #ifdef ARCH_STM32WL
+#include "SX126xInterface.h"
+#include "rfswitch.h"
 
 /**
  * Our adapter for STM32WLE5JC radios
@@ -16,13 +16,4 @@ class STM32WLE5JCInterface : public SX126xInterface<STM32WLx>
     virtual bool init() override;
 };
 
-/* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
- * Wio-E5 module ONLY transmits through RFO_HP
- * Receive: PA4=1, PA5=0
- * Transmit(high output power, SMPS mode): PA4=0, PA5=1 */
-static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA4, PA5, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[4] = {
-    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};
-
 #endif // ARCH_STM32WL

src/mesh/StreamAPI.cpp

@@ -16,6 +16,95 @@ int32_t StreamAPI::runOncePart()
     return result;
 }
 
+int32_t StreamAPI::runOncePart(char *buf, uint16_t bufLen)
+{
+    auto result = readStream(buf, bufLen);
+    writeStream();
+    checkConnectionTimeout();
+    return result;
+}
+
+/**
+ * Read any rx chars from the link and call handleRecStream
+ */
+int32_t StreamAPI::readStream(char *buf, uint16_t bufLen)
+{
+    if (bufLen < 1) {
+        // Nothing available this time, if the computer has talked to us recently, poll often, otherwise let CPU sleep a long time
+        bool recentRx = Throttle::isWithinTimespanMs(lastRxMsec, 2000);
+        return recentRx ? 5 : 250;
+    } else {
+        handleRecStream(buf, bufLen);
+        // we had bytes available this time, so assume we might have them next time also
+        lastRxMsec = millis();
+        return 0;
+    }
+}
+
+/**
+ * call getFromRadio() and deliver encapsulated packets to the Stream
+ */
+void StreamAPI::writeStream()
+{
+    if (canWrite) {
+        uint32_t len;
+        do {
+            // Send every packet we can
+            len = getFromRadio(txBuf + HEADER_LEN);
+            emitTxBuffer(len);
+        } while (len);
+    }
+}
+
+int32_t StreamAPI::handleRecStream(char *buf, uint16_t bufLen)
+{
+    uint16_t index = 0;
+    while (bufLen > index) { // Currently we never want to block
+        int cInt = buf[index++];
+        if (cInt < 0)
+            break; // We ran out of characters (even though available said otherwise) - this can happen on rf52 adafruit
+                   // arduino
+
+        uint8_t c = (uint8_t)cInt;
+
+        // Use the read pointer for a little state machine, first look for framing, then length bytes, then payload
+        size_t ptr = rxPtr;
+
+        rxPtr++;        // assume we will probably advance the rxPtr
+        rxBuf[ptr] = c; // store all bytes (including framing)
+
+        // console->printf("rxPtr %d ptr=%d c=0x%x\n", rxPtr, ptr, c);
+
+        if (ptr == 0) { // looking for START1
+            if (c != START1)
+                rxPtr = 0;     // failed to find framing
+        } else if (ptr == 1) { // looking for START2
+            if (c != START2)
+                rxPtr = 0;                             // failed to find framing
+        } else if (ptr >= HEADER_LEN - 1) {            // we have at least read our 4 byte framing
+            uint32_t len = (rxBuf[2] << 8) + rxBuf[3]; // big endian 16 bit length follows framing
+
+            // console->printf("len %d\n", len);
+
+            if (ptr == HEADER_LEN - 1) {
+                // we _just_ finished our 4 byte header, validate length now (note: a length of zero is a valid
+                // protobuf also)
+                if (len > MAX_TO_FROM_RADIO_SIZE)
+                    rxPtr = 0; // length is bogus, restart search for framing
+            }
+
+            if (rxPtr != 0)                        // Is packet still considered 'good'?
+                if (ptr + 1 >= len + HEADER_LEN) { // have we received all of the payload?
+                    rxPtr = 0;                     // start over again on the next packet
+
+                    // If we didn't just fail the packet and we now have the right # of bytes, parse it
+                    handleToRadio(rxBuf + HEADER_LEN, len);
+                }
+        }
+    }
+    return 0;
+}
+
 /**
  * Read any rx chars from the link and call handleToRadio
  */
@@ -76,21 +165,6 @@ int32_t StreamAPI::readStream()
     }
 }
 
-/**
- * call getFromRadio() and deliver encapsulated packets to the Stream
- */
-void StreamAPI::writeStream()
-{
-    if (canWrite) {
-        uint32_t len;
-        do {
-            // Send every packet we can
-            len = getFromRadio(txBuf + HEADER_LEN);
-            emitTxBuffer(len);
-        } while (len);
-    }
-}
-
 /**
  * Send the current txBuffer over our stream
  */

src/mesh/StreamAPI.h

@@ -50,12 +50,15 @@ class StreamAPI : public PhoneAPI
      * phone.
      */
     virtual int32_t runOncePart();
+    virtual int32_t runOncePart(char *buf,uint16_t bufLen);
 
   private:
     /**
      * Read any rx chars from the link and call handleToRadio
      */
     int32_t readStream();
+    int32_t readStream(char *buf,uint16_t bufLen);
+    int32_t handleRecStream(char *buf,uint16_t bufLen);
 
     /**
      * call getFromRadio() and deliver encapsulated packets to the Stream

src/mesh/api/PacketAPI.cpp

@@ -59,6 +59,7 @@ bool PacketAPI::receivePacket(void)
         switch (mr->which_payload_variant) {
         case meshtastic_ToRadio_packet_tag: {
             meshtastic_MeshPacket *mp = &mr->packet;
+            mp->transport_mechanism = meshtastic_MeshPacket_TransportMechanism_TRANSPORT_API;
             printPacket("PACKET FROM QUEUE", mp);
             service->handleToRadio(*mp);
             break;

src/mesh/generated/meshtastic/config.pb.h

@@ -64,7 +64,12 @@ typedef enum _meshtastic_Config_DeviceConfig_Role {
     in areas not already covered by other routers, or to bridge around problematic terrain,
     but should not be given priority over other routers in order to avoid unnecessaraily
     consuming hops. */
-    meshtastic_Config_DeviceConfig_Role_ROUTER_LATE = 11
+    meshtastic_Config_DeviceConfig_Role_ROUTER_LATE = 11,
+    /* Description: Treats packets from or to favorited nodes as ROUTER, and all other packets as CLIENT.
+ Technical Details: Used for stronger attic/roof nodes to distribute messages more widely
+    from weaker, indoor, or less-well-positioned nodes. Recommended for users with multiple nodes
+    where one CLIENT_BASE acts as a more powerful base station, such as an attic/roof node. */
+    meshtastic_Config_DeviceConfig_Role_CLIENT_BASE = 12
 } meshtastic_Config_DeviceConfig_Role;
 
 /* Defines the device's behavior for how messages are rebroadcast */
@@ -207,10 +212,10 @@ typedef enum _meshtastic_Config_DisplayConfig_OledType {
     meshtastic_Config_DisplayConfig_OledType_OLED_SSD1306 = 1,
     /* Default / Autodetect */
     meshtastic_Config_DisplayConfig_OledType_OLED_SH1106 = 2,
-    /* Can not be auto detected but set by proto. Used for 128x128 screens */
-    meshtastic_Config_DisplayConfig_OledType_OLED_SH1107 = 3,
     /* Can not be auto detected but set by proto. Used for 128x64 screens */
-    meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_64 = 4
+    meshtastic_Config_DisplayConfig_OledType_OLED_SH1107 = 3,
+    /* Can not be auto detected but set by proto. Used for 128x128 screens */
+    meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_128 = 4
 } meshtastic_Config_DisplayConfig_OledType;
 
 typedef enum _meshtastic_Config_DisplayConfig_DisplayMode {
@@ -646,8 +651,8 @@ extern "C" {
 
 /* Helper constants for enums */
 #define _meshtastic_Config_DeviceConfig_Role_MIN meshtastic_Config_DeviceConfig_Role_CLIENT
-#define _meshtastic_Config_DeviceConfig_Role_MAX meshtastic_Config_DeviceConfig_Role_ROUTER_LATE
-#define _meshtastic_Config_DeviceConfig_Role_ARRAYSIZE ((meshtastic_Config_DeviceConfig_Role)(meshtastic_Config_DeviceConfig_Role_ROUTER_LATE+1))
+#define _meshtastic_Config_DeviceConfig_Role_MAX meshtastic_Config_DeviceConfig_Role_CLIENT_BASE
+#define _meshtastic_Config_DeviceConfig_Role_ARRAYSIZE ((meshtastic_Config_DeviceConfig_Role)(meshtastic_Config_DeviceConfig_Role_CLIENT_BASE+1))
 
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN meshtastic_Config_DeviceConfig_RebroadcastMode_ALL
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_MAX meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY
@@ -682,8 +687,8 @@ extern "C" {
 #define _meshtastic_Config_DisplayConfig_DisplayUnits_ARRAYSIZE ((meshtastic_Config_DisplayConfig_DisplayUnits)(meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL+1))
 
 #define _meshtastic_Config_DisplayConfig_OledType_MIN meshtastic_Config_DisplayConfig_OledType_OLED_AUTO
-#define _meshtastic_Config_DisplayConfig_OledType_MAX meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_64
-#define _meshtastic_Config_DisplayConfig_OledType_ARRAYSIZE ((meshtastic_Config_DisplayConfig_OledType)(meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_64+1))
+#define _meshtastic_Config_DisplayConfig_OledType_MAX meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_128
+#define _meshtastic_Config_DisplayConfig_OledType_ARRAYSIZE ((meshtastic_Config_DisplayConfig_OledType)(meshtastic_Config_DisplayConfig_OledType_OLED_SH1107_128_128+1))
 
 #define _meshtastic_Config_DisplayConfig_DisplayMode_MIN meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT
 #define _meshtastic_Config_DisplayConfig_DisplayMode_MAX meshtastic_Config_DisplayConfig_DisplayMode_COLOR

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -360,7 +360,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2271
+#define meshtastic_BackupPreferences_size        2273
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1737
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -188,7 +188,7 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
 #define meshtastic_LocalConfig_size              747
-#define meshtastic_LocalModuleConfig_size        669
+#define meshtastic_LocalModuleConfig_size        671
 
 #ifdef __cplusplus
 } /* extern "C" */