More progress

Make NodeDB sort its internal vector when lastheard is updated. Don't…

.devcontainer/Dockerfile

@@ -29,6 +29,7 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     gpg \
     gnupg2 \
     libusb-1.0-0-dev \
+    libuv1-dev \
     libi2c-dev \
     libxcb-xkb-dev \
     libxkbcommon-dev \

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+# These are supported funding model platforms
+
+open_collective: meshtastic

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -72,6 +72,15 @@ body:
     validations:
       required: true
 
+  - type: checkboxes
+    id: mui
+    attributes:
+      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
+      options:
+        - label: Meshtastic UI aka MUI colorTFT
+        - label: InkHUD ePaper
+        - label: OLED slide UI on any display
+
   - type: input
     id: version
     attributes:

.github/actions/build-variant/action.yml

@@ -43,6 +43,13 @@ runs:
       id: base
       uses: ./.github/actions/setup-base
 
+    - name: Get web ui version
+      if: inputs.include-web-ui == 'true'
+      id: webver
+      shell: bash
+      run: |
+        echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
+
     - name: Pull web ui
       if: inputs.include-web-ui == 'true'
       uses: dsaltares/fetch-gh-release-asset@master
@@ -51,7 +58,7 @@ runs:
         file: build.tar
         target: build.tar
         token: ${{ inputs.github_token }}
-        version: tags/v2.5.3
+        version: tags/v${{ steps.webver.outputs.ver }}
 
     - name: Unpack web ui
       if: inputs.include-web-ui == 'true'

.github/actions/setup-native/action.yml

@@ -11,4 +11,4 @@ runs:
     - name: Install libs needed for native build
       shell: bash
       run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
+        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev

.github/dependabot.yml

@@ -1,29 +0,0 @@
-#trunk-ignore-all(yamllint/quoted-strings): required by dependabot syntax check
-version: 2
-updates:
-  - package-ecosystem: docker
-    directory: /.devcontainer
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific
-  - package-ecosystem: docker
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific
-  - package-ecosystem: gitsubmodule
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific
-    ignore:
-      - dependency-name: protobufs
-  - package-ecosystem: github-actions
-    directory: /.github/workflows
-    schedule:
-      interval: daily
-      time: "05:00"
-      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,6 +1,6 @@
-### ❌ (Please delete all these tips and replace them with your text) ❌
+## 🙏 Thank you for sending in a pull request, here's some tips to get started!
 
-## Thank you for sending in a pull request, here's some tips to get started!
+### ❌ (Please delete all these tips and replace them with your text) ❌
 
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
@@ -12,4 +12,17 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
+- Please do not submit untested code.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
+
+## 🤝 Attestations
+
+- [ ] I have tested that my proposed changes behave as described.
+- [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
+  - [ ] Heltec (Lora32) V3
+  - [ ] LilyGo T-Deck
+  - [ ] LilyGo T-Beam
+  - [ ] RAK WisBlock 4631
+  - [ ] Seeed Studio T-1000E tracker card
+  - [ ] Other (please specify below)

.github/workflows/daily_packaging.yml

@@ -1,7 +1,7 @@
 name: Daily Packaging
 on:
   schedule:
-    - cron: 0 9 * * *
+    - cron: 0 2 * * *
   workflow_dispatch:
   push:
     branches:

.github/workflows/docker_build.yml

@@ -26,6 +26,11 @@ on:
         required: false
         type: boolean
         default: false
+      pio_env:
+        description: PlatformIO environment to build
+        required: false
+        type: string
+        default: native
     outputs:
       digest:
         description: Digest of built image
@@ -90,3 +95,5 @@ jobs:
           push: ${{ inputs.push }}
           tags: ${{ steps.meta.outputs.tags }} # Tag is only meant to be consumed by the "manifest" job
           platforms: ${{ inputs.platform }}
+          build-args: |
+            PIO_ENV=${{ inputs.pio_env }}

.github/workflows/main_matrix.yml

@@ -5,14 +5,20 @@ concurrency:
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
-    branches: [master, develop]
+    branches:
+      - master
+      - develop
+      - event/*
     paths-ignore:
       - "**.md"
       - version.properties
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
-    branches: [master, develop]
+    branches:
+      - master
+      - develop
+      - event/*
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -32,12 +38,12 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "${{ github.head_ref }}" == "" ]]; then
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
@@ -143,9 +149,10 @@ jobs:
     secrets: inherit
 
   test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker-debian-amd64:
+  docker-deb-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -153,7 +160,16 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-alpine-amd64:
+  docker-deb-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -161,7 +177,16 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-debian-arm64:
+  docker-alp-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -169,7 +194,7 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  docker-debian-armv7:
+  docker-deb-armv7:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -177,17 +202,6 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  after-checks:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    needs: [check]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
   gather-artifacts:
     permissions:
       contents: write
@@ -332,7 +346,7 @@ jobs:
           merge-multiple: true
           path: ./output/pio-deps-native-tft
 
-      - name: Zip linux sources
+      - name: Zip Linux sources
         working-directory: output
         run: |
           zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
@@ -342,7 +356,9 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add linux sources to release
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
           gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
@@ -400,9 +416,53 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add bins and debug elfs to release
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware]
+    env:
+      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Setup Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ steps.version.outputs.long }}
+          enable_jekyll: true

.github/workflows/release_channels.yml

@@ -46,11 +46,14 @@ jobs:
 
   # Create a PR to bump version when a release is Published
   bump-version:
-    if: ${{ github.event.release.published }}
+    if: github.event.action == 'published'
     runs-on: ubuntu-latest
     permissions:
       pull-requests: write
       contents: write
+    defaults:
+      run:
+        shell: bash
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -60,32 +63,45 @@ jobs:
         with:
           python-version: 3.x
 
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-
       - name: Bump version.properties
-        run: >-
-          bin/bump_version.py
+        run: |
+          # Bump version.properties
+          chmod +x ./bin/bump_version.py
+          ./bin/bump_version.py
+
+      - name: Get new release version string
+        run: |
+          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
+        id: new_version
 
       - name: Ensure debian deps are installed
-        shell: bash
         run: |
           sudo apt-get update -y --fix-missing
           sudo apt-get install -y devscripts
 
       - name: Update debian changelog
-        run: >-
-          debian/ci_changelog.sh
+        run: |
+          # Update debian changelog
+          chmod +x ./debian/ci_changelog.sh
+          ./debian/ci_changelog.sh
 
-      - name: Create version.properties pull request
+      - name: Bump org.meshtastic.meshtasticd.metainfo.xml
+        run: |
+          # Bump org.meshtastic.meshtasticd.metainfo.xml
+          pip install -r bin/bump_metainfo/requirements.txt -q
+          chmod +x ./bin/bump_metainfo/bump_metainfo.py
+          ./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.new_version.outputs.short }}"
+        env:
+          PIP_DISABLE_PIP_VERSION_CHECK: 1
+
+      - name: Create Bumps pull request
         uses: peter-evans/create-pull-request@v7
         with:
-          title: Bump version.properties
+          base: ${{ github.event.repository.default_branch }}
+          branch: create-pull-request/bump-version
+          title: Bump release version
+          commit-message: automated bumps
           add-paths: |
             version.properties
             debian/changelog
+            bin/org.meshtastic.meshtasticd.metainfo.xml

.github/workflows/sec_sast_semgrep_cron.yml

@@ -13,7 +13,7 @@ permissions:
 
 jobs:
   semgrep-full:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
 

.github/workflows/sec_sast_semgrep_pull.yml

@@ -6,7 +6,7 @@ permissions: read-all
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
 

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.0.0
+        uses: dorny/test-reporter@v2.1.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -5,7 +5,10 @@ on:
     - cron: 0 0 * * * # Run every day at midnight
   workflow_dispatch: {}
 
-permissions: read-all
+permissions:
+  contents: read
+  actions: read
+  checks: write
 
 jobs:
   native-tests:
@@ -44,7 +47,7 @@ jobs:
       - name: Setup Node
         uses: actions/setup-node@v4
         with:
-          node-version: 18
+          node-version: 22
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/update_protobufs.yml

@@ -33,6 +33,7 @@ jobs:
       - name: Create pull request
         uses: peter-evans/create-pull-request@v7
         with:
+          branch: create-pull-request/update-protobufs
           title: Update protobufs and classes
           add-paths: |
             protobufs

.trunk/configs/.prettierignore

@@ -0,0 +1 @@
+renovate.json

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.22.11
+  version: 1.24.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.7
+      ref: v1.7.0
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
+    - checkov@3.2.442
+    - renovate@40.60.3
     - prettier@3.5.3
-    - trufflehog@3.88.17
-    - yamllint@1.36.0
-    - bandit@1.8.3
-    - checkov@3.2.386
-    - terrascan@1.19.9
-    - trivy@0.60.0
+    - trufflehog@3.89.2
+    - yamllint@1.37.1
+    - bandit@1.8.5
+    - trivy@0.63.0
     - taplo@0.9.3
-    - ruff@0.10.0
+    - ruff@0.12.0
     - isort@6.0.1
-    - markdownlint@0.44.0
-    - oxipng@9.1.4
+    - markdownlint@0.45.0
+    - oxipng@9.1.5
     - svgo@3.3.2
     - actionlint@1.7.7
-    - flake8@7.1.2
+    - flake8@7.2.0
     - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
     - black@25.1.0
     - git-diff-check
-    - gitleaks@8.24.0
+    - gitleaks@8.27.2
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]
@@ -38,7 +38,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@18.20.5
+    - node@22.16.0
 actions:
   disabled:
     - trunk-announce

Dockerfile

@@ -1,20 +1,20 @@
-# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
 FROM python:3.13-bookworm AS builder
+ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
 # Install Dependencies
 ENV PIP_ROOT_USER_ACTION=ignore
 RUN apt-get update && apt-get install --no-install-recommends -y \
-        wget g++ zip git ca-certificates \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config \
+        curl wget g++ zip git ca-certificates pkg-config \
+        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
+        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -24,13 +24,26 @@ WORKDIR /tmp/firmware
 COPY . /tmp/firmware
 
 # Build
-RUN bash ./bin/build-native.sh && \
+RUN bash ./bin/build-native.sh "$PIO_ENV" && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
+# Fetch web assets
+RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/firmware/bin/web.version)/build.tar" -o /tmp/web.tar \
+    && mkdir -p /tmp/web \
+    && tar -xf /tmp/web.tar -C /tmp/web/ \
+    && gzip -dr /tmp/web \
+    && rm /tmp/web.tar
 
 ##### PRODUCTION BUILD #############
 
 FROM debian:bookworm-slim
+LABEL org.opencontainers.image.title="Meshtastic" \
+      org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
+      org.opencontainers.image.url="https://meshtastic.org" \
+      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
+      org.opencontainers.image.authors="Meshtastic" \
+      org.opencontainers.image.licenses="GPL-3.0-or-later" \
+      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
@@ -38,14 +51,17 @@ ENV TZ=Etc/UTC
 USER root
 
 RUN apt-get update && apt-get --no-install-recommends -y install \
-        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7 libssl3 \
+        libx11-6 libinput10 libxkbcommon-x11-0 \
     && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
 
 # Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 
@@ -54,7 +70,9 @@ VOLUME /var/lib/meshtasticd
 
 # Expose Meshtastic TCP API port from the host
 EXPOSE 4403
+# Expose Meshtastic Web UI port from the host
+EXPOSE 9443
 
-CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
+CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
 
-HEALTHCHECK NONE
+HEALTHCHECK NONE

README.md

@@ -37,3 +37,4 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
+| 2.6.x            | :white_check_mark: |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -1,15 +1,16 @@
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.13-alpine3.21 AS builder
-
+FROM python:3.13-alpine3.22 AS builder
+ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
+
 RUN apk --no-cache add \
         bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone \
+        libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
+        libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
     && pip install --no-cache-dir -U platformio \
     && mkdir /tmp/firmware
@@ -21,23 +22,35 @@ COPY . /tmp/firmware
 # Add `argp` for musl
 ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
 
-RUN bash ./bin/build-native.sh && \
+RUN bash ./bin/build-native.sh "$PIO_ENV" && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.21
+FROM alpine:3.22
+LABEL org.opencontainers.image.title="Meshtastic" \
+      org.opencontainers.image.description="Alpine Meshtastic daemon" \
+      org.opencontainers.image.url="https://meshtastic.org" \
+      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
+      org.opencontainers.image.authors="Meshtastic" \
+      org.opencontainers.image.licenses="GPL-3.0-or-later" \
+      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 
 # nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
 USER root
 
 RUN apk --no-cache add \
-        libstdc++ libgpiod yaml-cpp libusb i2c-tools \
+        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
+        libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+
+# Fetch compiled binary from the builder
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
+# Copy config templates
+COPY ./bin/config.d /etc/meshtasticd/available.d
 
 WORKDIR /var/lib/meshtasticd
 VOLUME /var/lib/meshtasticd

arch/esp32/esp32.ini

@@ -2,7 +2,9 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.10.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
+  platformio/espressif32@6.11.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -44,13 +46,20 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
+  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
+  https://github.com/meshtastic/esp32_https_server/archive/896f1771ceb5979987a0b41028bf1b4e7aad419b.zip
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
   h2zero/NimBLE-Arduino@^1.4.3
-  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
+  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
   lewisxhe/XPowersLib@^0.2.7
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 lib_ignore = 
   segger_rtt

arch/esp32/esp32c6.ini

@@ -1,6 +1,8 @@
 [esp32c6_base]
 extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
+platform =
+  # Do not renovate until we have switched to pioarduino tagged builds
+  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
 build_flags =
   ${arduino_base.build_flags}
   -Wall
@@ -23,10 +25,14 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
   lewisxhe/XPowersLib@^0.2.7
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 build_src_filter = 
  ${esp32_base.build_src_filter} -<mesh/http> 

arch/esp32/esp32s2.ini

@@ -16,4 +16,4 @@ build_flags =
 lib_ignore = 
   ${esp32_base.lib_ignore} 
   NimBLE-Arduino
-  libpax
+  libpax

arch/esp32/esp32s3.ini

@@ -3,4 +3,3 @@ extends = esp32_base
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
-

arch/nrf52/nrf52.ini

@@ -1,10 +1,14 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.7.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
+  platformio/nordicnrf52@^10.8.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino.git#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  # TODO renovate
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
@@ -17,7 +21,6 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -DMAX_NUM_NODES=80
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -25,8 +28,9 @@ build_src_filter =
 lib_deps=
   ${arduino_base.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 lib_ignore =
   BluetoothOTA
-  lvgl
+  lvgl

arch/nrf52/nrf52840.ini

@@ -6,7 +6,9 @@ build_flags = ${nrf52_base.build_flags}
 lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
+  ${environmental_extra.lib_deps}
+  # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -1,6 +1,8 @@
 ; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
+platform =
+  # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
+  https://github.com/meshtastic/platform-native/archive/681ee029207e9fd040afa223df6e54074cbbe084.zip
 framework = arduino
 
 build_src_filter = 
@@ -15,18 +17,19 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
-  -<modules/Telemetry/EnvironmentTelemetry.cpp>
-  -<modules/Telemetry/AirQualityTelemetry.cpp>
-  -<modules/Telemetry/Sensor>
   +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto@^0.4.0
+  ${environmental_base.lib_deps}
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@^1.2.0
-  https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
+  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
+  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
 
 build_flags =
   ${arduino_base.build_flags}
@@ -34,10 +37,15 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
+  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
   -li2c
+  -luv
+  -std=gnu17
   -std=c++17
+
+lib_ignore = Adafruit NeoPixel

arch/rp2xx0/rp2040.ini

@@ -1,8 +1,13 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.4.3
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -23,5 +28,7 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0

arch/rp2xx0/rp2350.ini

@@ -1,8 +1,13 @@
-; Common settings for rp2040 Processor based targets
+; Common settings for rp2350 Processor based targets
 [rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5 ; For arduino-pico >= 4.4.3
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.4.3
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -20,5 +25,7 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0

arch/stm32/stm32.ini

@@ -1,13 +1,18 @@
 [stm32_base]
 extends = arduino_base
-platform = platformio/ststm32
-platform_packages = platformio/framework-arduinoststm32@^4.20900.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
+  platformio/ststm32@19.2.0
+platform_packages =
+  # TODO renovate
+  platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
+extra_scripts =
+  ${env.extra_scripts}
+  post:extra_scripts/extra_stm32.py
 
 build_type = release
 
-;board_build.flash_offset = 0x08000000
-
-build_flags = 
+build_flags =
   ${arduino_base.build_flags}
   -flto
   -Isrc/platform/stm32wl -g
@@ -18,27 +23,25 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN
   -DMESHTASTIC_EXCLUDE_MQTT
   -DMESHTASTIC_EXCLUDE_BLUETOOTH
-  -DMESHTASTIC_EXCLUDE_PKI
   -DMESHTASTIC_EXCLUDE_GPS
-;  -DVECT_TAB_OFFSET=0x08000000
-  -DconfigUSE_CMSIS_RTOS_V2=1
-;  -DSPI_MODE_0=SPI_MODE0
+  ;-DDEBUG_MUTE
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-  
-build_src_filter = 
+
+build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
+debug_tool = stlink
 
 lib_deps =
   ${env.lib_deps}
-  charlesbaynham/OSFS@^1.2.3
-  jgromes/RadioLib@7.0.2
-  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
+  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
   mathertel/OneButton@2.6.1
-  Wire
+  Wire

bin/99-meshtasticd-udev.rules

@@ -0,0 +1,7 @@
+# Set spidev ownership to 'spi' group
+SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
+# Allow access to USB CH341 devices
+SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
+# Set gpio ownership to 'gpio' group
+SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

bin/build-native.sh

@@ -15,6 +15,7 @@ platformioFailed() {
 
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
+PIO_ENV=${1:-native}
 
 OUTDIR=release/
 
@@ -24,7 +25,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-pio pkg update --environment native || platformioFailed
-pio run --environment native || platformioFailed
-cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
+pio pkg update --environment "$PIO_ENV" || platformioFailed
+pio run --environment "$PIO_ENV" || platformioFailed
+cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/bump_metainfo/bump_metainfo.py

@@ -0,0 +1,72 @@
+#!/usr/bin/env python3
+import argparse
+import xml.etree.ElementTree as ET
+from defusedxml.ElementTree import parse
+from datetime import datetime, timezone
+
+
+# Indent by 2 spaces to align with xml formatting.
+def indent(elem, level=0):
+    i = "\n" + level * "  "
+    if len(elem):
+        if not elem.text or not elem.text.strip():
+            elem.text = i + "  "
+        for child in elem:
+            indent(child, level + 1)
+        if not child.tail or not child.tail.strip():
+            child.tail = i
+    if level and (not elem.tail or not elem.tail.strip()):
+        elem.tail = i
+
+
+def main():
+    parser = argparse.ArgumentParser(
+        description="Prepend new release entry to metainfo.xml file.")
+    parser.add_argument("--file", help="Path to the metainfo.xml file",
+                        default="org.meshtastic.meshtasticd.metainfo.xml")
+    parser.add_argument("version", help="Version string (e.g. 2.6.4)")
+    parser.add_argument("--date", help="Release date (YYYY-MM-DD), defaults to today",
+                        default=datetime.now(timezone.utc).date().isoformat())
+
+    args = parser.parse_args()
+
+    tree = parse(args.file)
+    root = tree.getroot()
+
+    releases = root.find('releases')
+    if releases is None:
+        raise RuntimeError("<releases> element not found in XML.")
+
+    existing_versions = {
+        release.get('version'): release
+        for release in releases.findall('release')
+    }
+    existing_release = existing_versions.get(args.version)
+
+    if existing_release is not None:
+        if not existing_release.get('date'):
+            print(f"Version {args.version} found without date. Adding date...")
+            existing_release.set('date', args.date)
+        else:
+            print(
+                f"Version {args.version} is already present with date, skipping insertion.")
+    else:
+        new_release = ET.Element('release', {
+            'version': args.version,
+            'date': args.date
+        })
+        url = ET.SubElement(new_release, 'url', {'type': 'details'})
+        url.text = f"https://github.com/meshtastic/firmware/releases?q=tag%3Av{args.version}"
+
+        releases.insert(0, new_release)
+
+        indent(releases, level=1)
+        releases.tail = "\n"
+
+        print(f"Inserted new release: {args.version}")
+
+    tree.write(args.file, encoding='UTF-8', xml_declaration=True)
+
+
+if __name__ == "__main__":
+    main()

bin/bump_metainfo/requirements.txt

@@ -0,0 +1 @@
+defusedxml==0.7.1

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -6,6 +6,12 @@
 ### Including the "Module:" line!
 ---
 Lora:
+  # Default to auto-detecting the module type
+  # This will be overridden by configs from config.d
+  Module: auto
+
+#  # Uncomment to enable Simulation mode, or use --sim
+#  Module: sim
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -90,9 +96,9 @@ Lora:
 ### Some devices, like the pinedio, may require spidev0.1 as a workaround.
 #  spidev: spidev0.0
 
-### Define GPIO buttons here:
+### Deprecated location for User Button:
 
-GPIO:
+#GPIO:
 #  User: 6
 
 ### Define GPS
@@ -109,17 +115,6 @@ I2C:
 
 Display:
 
-### Waveshare 1.44inch LCD HAT
-#  Panel: ST7735S
-#  CS: 8         #Chip Select
-#  DC: 25        # Data/Command pin
-#  Backlight: 24
-#  Width: 128
-#  Height: 128
-#  Reset: 27
-#  OffsetX: 0
-#  OffsetY: 0
-
 ### Adafruit PiTFT 2.8 TFT+Touchscreen
 #  Panel: ILI9341
 #  CS: 8
@@ -174,6 +169,16 @@ Input:
 
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
+### Standard User Button Config
+#  UserButton: 6
+
+### Trackball/Joystick input
+#  TrackballUp: 6
+#  TrackballDown: 19
+#  TrackballLeft: 5
+#  TrackballRight: 26
+#  TrackballPress: 13
+
 ###
 
 Logging:
@@ -182,14 +187,22 @@ Logging:
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
-#  Port: 443 # Port for Webserver & Webservices
+#  Port: 9443 # Port for Webserver & Webservices
 #  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
 #  SSLKey: /etc/meshtasticd/ssl/private_key.pem # Path to SSL Key, generated if not present
 #  SSLCert: /etc/meshtasticd/ssl/certificate.pem # Path to SSL Certificate, generated if not present
 
+
+HostMetrics:
+#  ReportInterval: 30 # Interval in minutes between HostMetrics report packets, or 0 for disabled
+#  Channel: 0 # channel to send Host Metrics over. Defaults to the primary channel.
+#  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
+
+
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
   ConfigDirectory: /etc/meshtasticd/config.d/
+  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
-#  MACAddressSource: eth0
+#  MACAddressSource: eth0

bin/config.d/display-waveshare-1-44.yaml

@@ -0,0 +1,26 @@
+### Waveshare 1.44inch LCD HAT
+Display:
+  Panel: ST7735S
+  spidev: spidev0.0  # Specify either the spidev here, or the CS below
+#  CS: 8         #Chip Select # Optional, as this is the default pin for spidev0.0
+  DC: 25        # Data/Command pin
+  Backlight: 24
+  Width: 128
+  Height: 128
+  Reset: 27
+  OffsetX: 2
+  OffsetY: 1
+
+
+#  OffsetY: 31  # These two options are used to properly flip the screen 180 degrees
+#  OffsetRotate: 3
+
+
+Input:
+  TrackballUp: 6
+  TrackballDown: 19
+  TrackballLeft: 5
+  TrackballRight: 26
+  TrackballPress: 13
+
+#  User: 21

bin/config.d/lora-Adafruit-RFM9x

@@ -1,5 +0,0 @@
-#  Module: RF95  # Adafruit RFM9x
-#  Reset: 25
-#  CS: 7
-#  IRQ: 22
-#  Busy: 23

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -0,0 +1,6 @@
+Lora:
+  Module: RF95  # Adafruit RFM9x
+  Reset: 25
+  CS: 7
+  IRQ: 22
+#  Busy: 23

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,3 +1,5 @@
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
 Lora:
   Module: sx1262
   CS: 21
@@ -9,4 +11,4 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   # Only for E22-900M33S:
   # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
+  # SX126X_MAX_POWER: 8

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -0,0 +1,11 @@
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Lora:
+  Module: sx1262  # Ebyte E22-900M22S 
+  CS: 8
+  IRQ: 16
+  Busy: 20
+  Reset: 24
+  RXen: 12
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-RAK6421.yaml

@@ -0,0 +1,21 @@
+Lora:
+
+  ### RAK13300in Slot 1
+  Module: sx1262
+  IRQ: 22 #IO6
+  Reset: 16 # IO4
+  Busy: 24 # IO5
+  # Ant_sw: 13 # IO3 
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -0,0 +1,18 @@
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  gpiochip: 0
+  MOSI: 12
+  MISO: 13
+  IRQ: 1
+  Busy: 23
+  Reset: 22
+  RXen: 0
+  gpiochip: 1
+  CS: 9
+  SCK: 11
+#  TXen: bridge to DIO2 on E22 module
+  SX126X_MAX_POWER: 22
+  spidev: spidev1.0
+  spiSpeed: 2000000

bin/config.d/lora-piggystick-lr1121.yaml

@@ -0,0 +1,11 @@
+Lora:
+  Module: lr1121
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  spidev: ch341
+  DIO3_TCXO_VOLTAGE: 1.8
+#  USB_Serialnum: 12345678
+  USB_PID: 0x5512
+  USB_VID: 0x1A86

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -0,0 +1,17 @@
+Lora:
+  Module: sx1262
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  RXen: 1
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: ch341
+  USB_PID: 0x5512
+  USB_VID: 0x1A86
+  # Optional: Reduce power to 10 dBm to
+  # avoid over-drawing the USB port
+  # SX126X_MAX_POWER: 10
+  # Optional: Set the serial number for multi-radio support
+  # USB_Serialnum: 13374201

bin/device-install.bat

@@ -7,17 +7,25 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "WEB_APP=0"
 SET "TFT_BUILD=0"
-SET "TFT8=0"
-SET "TFT16=0"
+SET "BIGDB8=0"
+SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "BPS_RESET=0"
+
+@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
+SET "C3=esp32c3"
+@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
 
 GOTO getopts
 :help
 ECHO Flash image file to device, but first erasing and writing system information.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web)
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web) [--1200bps-reset]
 ECHO.
 ECHO Options:
 ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
@@ -28,13 +36,16 @@ ECHO     -P python        Specify alternate python interpreter to use to invoke
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
 ECHO     --web            Enable WebUI. (default: false)
+ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
 ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -51,10 +62,13 @@ IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
 IF /I "%~1"=="--web" SET "WEB_APP=1"
+IF /I "%~1"=="--1200bps-reset" SET "BPS_RESET=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %BPS_RESET% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
@@ -88,6 +102,9 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -106,7 +123,7 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GTR 2 (
+IF %ERRORLEVEL% GEQ 2 (
     @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
@@ -121,10 +138,17 @@ CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
 IF "__!ESPTOOL_PORT!__" == "____" (
     CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
 ) ELSE (
+    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
     CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %BPS_RESET% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
 @REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
 IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
@@ -133,44 +157,36 @@ IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
         CALL :LOG_MESSAGE ERROR "Cannot enable WebUI (--web) and MUI." & GOTO eof
     )
     SET "TFT_BUILD=1"
-    GOTO tft
 ) ELSE (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
-    GOTO no_tft
 )
 
-:tft
-SET "TFT8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-FOR %%a IN (%TFT8MB%) DO (
+FOR %%a IN (%BIGDB_8MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %TFT8MB%.
-        SET "TFT8=1"
-        GOTO end_loop_tft8mb
+        @REM We are working with any of %BIGDB_8MB%.
+        SET "BIGDB8=1"
+        GOTO end_loop_bigdb_8mb
     )
 )
-:end_loop_tft8mb
+:end_loop_bigdb_8mb
 
-SET "TFT16MB=t-deck"
-FOR %%a IN (%TFT16MB%) DO (
+FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
-        @REM We are working with any of %TFT16MB%.
-        SET "TFT16=1"
-        GOTO end_loop_tft16mb
+        @REM We are working with any of %BIGDB_16MB%.
+        SET "BIGDB16=1"
+        GOTO end_loop_bigdb_16mb
     )
 )
-:end_loop_tft16mb
+:end_loop_bigdb_16mb
 
-IF %TFT8% EQU 1 CALL :LOG_MESSAGE INFO "tft and MUI 8mb selected."
-IF %TFT16% EQU 1 CALL :LOG_MESSAGE INFO "tft and MUI 16mb selected."
-
-:no_tft
+IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
 SET "BASENAME=!FILENAME:firmware-=!"
 CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
 
 @REM Account for S3 and C3 board's different OTA partition.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 FOR %%a IN (%S3%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %S3%.
@@ -179,7 +195,6 @@ FOR %%a IN (%S3%) DO (
     )
 )
 
-SET "C3=esp32c3"
 FOR %%a IN (%C3%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %C3%.
@@ -208,14 +223,14 @@ CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 SET "OTA_OFFSET=0x260000"
 SET "SPIFFS_OFFSET=0x300000"
 
-@REM Offsets for MUI 8mb.
-IF %TFT8% EQU 1 IF %TFT_BUILD% EQU 1 (
+@REM Offsets for BigDB 8mb.
+IF %BIGDB8% EQU 1 (
     SET "OTA_OFFSET=0x340000"
     SET "SPIFFS_OFFSET=0x670000"
 )
 
-@REM Offsets for MUI 16mb.
-IF %TFT16% EQU 1 IF %TFT_BUILD% EQU 1 (
+@REM Offsets for BigDB 16mb.
+IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"
     SET "SPIFFS_OFFSET=0xc90000"
 )
@@ -255,6 +270,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %BPS_RESET% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-install.sh

@@ -2,28 +2,81 @@
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 WEB_APP=false
-TFT8=false
-TFT16=false
+BPS_RESET=false
 TFT_BUILD=false
+MCU=""
+
+# Variant groups
+BIGDB_8MB=(
+	"picomputer-s3"
+	"unphone"
+	"seeed-sensecap-indicator"
+	"crowpanel-esp32s3"
+	"heltec_capsule_sensor_v3"
+	"heltec-v3"
+	"heltec-vision-master-e213"
+	"heltec-vision-master-e290"
+	"heltec-vision-master-t190"
+	"heltec-wireless-paper"
+	"heltec-wireless-tracker"
+	"heltec-wsl-v3"
+	"icarus"
+	"seeed-xiao-s3"
+	"tbeam-s3-core"
+	"tracksenger"
+)
+BIGDB_16MB=(
+	"t-deck"
+	"mesh-tab"
+	"t-energy-s3"
+	"dreamcatcher"
+	"ESP32-S3-Pico"
+	"m5stack-cores3"
+	"station-g2"
+    "t-eth-elite"
+    "t-watch-s3"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
+)
+S3_VARIANTS=(
+    "s3"
+    "-v3"
+    "t-deck"
+    "wireless-paper"
+    "wireless-tracker"
+    "station-g2"
+    "unphone"
+    "t-eth-elite"
+    "mesh-tab"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "seeed-sensecap-indicator"
+    "heltec_capsule_sensor_v3"
+    "vision-master"
+    "icarus"
+    "tracksenger"
+    "elecrow-adv"
+)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-	ESPTOOL_CMD="$PYTHON -m esptool"
+    ESPTOOL_CMD="$PYTHON -m esptool"
 elif command -v esptool >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool"
+    ESPTOOL_CMD="esptool"
 elif command -v esptool.py >/dev/null 2>&1; then
-	ESPTOOL_CMD="esptool.py"
+    ESPTOOL_CMD="esptool.py"
 else
-	echo "Error: esptool not found"
-	exit 1
+    echo "Error: esptool not found"
+    exit 1
 fi
 
 set -e
 
 # Usage info
 show_help() {
-	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web]
+    cat <<EOF
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web] [--1200bps-reset]
 Flash image file to device, but first erasing and writing system information.
 
     -h               Display this help and exit.
@@ -31,134 +84,146 @@ Flash image file to device, but first erasing and writing system information.
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
     --web            Enable WebUI. (Default: false)
+    --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
 }
 # Parse arguments using a single while loop
 while [ $# -gt 0 ]; do
-	case "$1" in
-	-h | --help)
-		show_help
-		exit 0
-		;;
-	-p)
-		ESPTOOL_PORT="$2"
-		shift # Shift past the option argument
-		;;
-	-P)
-		PYTHON="$2"
-		shift
-		;;
-	-f)
-		FILENAME="$2"
-		shift
-		;;
-	--web)
-		WEB_APP=true
-		;;
-	--) # Stop parsing options
-		shift
-		break
-		;;
-	*)
-		echo "Unknown argument: $1" >&2
-		exit 1
-		;;
-	esac
-	shift # Move to the next argument
+    case "$1" in
+    -h | --help)
+        show_help
+        exit 0
+        ;;
+    -p)
+        ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
+        shift
+        ;;
+    -P)
+        PYTHON="$2"
+        shift
+        ;;
+    -f)
+        FILENAME="$2"
+        shift
+        ;;
+    --web)
+        WEB_APP=true
+        ;;
+    --1200bps-reset)
+		    BPS_RESET=true
+		    ;;
+    --) # Stop parsing options
+        shift
+        break
+        ;;
+    *)
+        echo "Unknown argument: $1" >&2
+        exit 1
+        ;;
+    esac
+    shift # Move to the next argument
 done
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-	FILENAME=$1
-	shift
+if [[ $BPS_RESET == true ]]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+	exit 0
+fi
+
+[ -z "$FILENAME" ] && [ -n "$1" ] && {
+    FILENAME="$1"
+    shift
 }
 
-if [[ $FILENAME != firmware-* ]]; then
+if [[ "$FILENAME" != firmware-* ]]; then
   echo "Filename must be a firmware-* file."
   exit 1
 fi
 
-# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
-if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
-	TFT_BUILD=true
-	if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
-		echo "Cannot enable WebUI (--web) and MUI."
-		exit 1
-	fi
-
-	if [[ $FILENAME == *"picomputer-s3"* || $FILENAME == *"unphone"* || $FILENAME == *"seeed-sensecap-indicator"* ]]; then
-		TFT8=true
-	fi
-
-	if [[ $FILENAME == *"t-deck"* ]]; then
-		TFT16=true
-	fi
+# Check if FILENAME contains "-tft-" and prevent web/mui comingling.
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
+    TFT_BUILD=true
+    if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
+        echo "Cannot enable WebUI (--web) and MUI."
+        exit 1
+    fi
 fi
 
 # Extract BASENAME from %FILENAME% for later use.
 BASENAME="${FILENAME/firmware-/}"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-	# Default littlefs* offset (--web).
-	OFFSET=0x300000
+    # Default littlefs* offset (--web).
+    OFFSET=0x300000
 
-	# Default OTA Offset
-	OTA_OFFSET=0x260000
+    # Default OTA Offset
+    OTA_OFFSET=0x260000
 
-	# littlefs* offset for MUI 8mb and OTA OFFSET.
-	if [ "$TFT8" = true ] && [ "$TFT_BUILD" = true ]; then
-		OFFSET=0x670000
-		OTA_OFFSET=0x340000
-	fi
+    # littlefs* offset for BigDB 8mb and OTA OFFSET.
+    for variant in "${BIGDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x340000
+        fi
+    done
 
-	# littlefs* offset for MUI 16mb and OTA OFFSET.
-	if [ "$TFT16" = true ] && [ "$TFT_BUILD" = true ]; then
-		OFFSET=0xc90000
-		OTA_OFFSET=0x650000
-	fi
+    # littlefs* offset for BigDB 16mb and OTA OFFSET.
+    for variant in "${BIGDB_16MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0xc90000
+            OTA_OFFSET=0x650000
+        fi
+    done
 
-	# Account for S3 board's different OTA partition
-	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
-		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			OTAFILE=bleota.bin
-		else
-			OTAFILE=bleota-c3.bin
-		fi
-	else
-		OTAFILE=bleota-s3.bin
-	fi
+    # Account for S3 board's different OTA partition
+    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+    for variant in "${S3_VARIANTS[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            MCU="esp32s3"
+        fi
+    done
 
-	# Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
-	if [ "$WEB_APP" = true ]; then
-		SPIFFSFILE=littlefswebui-${BASENAME}
-	else
-		SPIFFSFILE=littlefs-${BASENAME}
-	fi
+    if [ "$MCU" != "esp32s3" ]; then
+        if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+            OTAFILE=bleota.bin
+        else
+            OTAFILE=bleota-c3.bin
+        fi
+    else
+        OTAFILE=bleota-s3.bin
+    fi
 
-	if [[ ! -f $FILENAME ]]; then
-		echo "Error: file ${FILENAME} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $OTAFILE ]]; then
-		echo "Error: file ${OTAFILE} wasn't found. Terminating."
-		exit 1
-	fi
-	if [[ ! -f $SPIFFSFILE ]]; then
-		echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
-		exit 1
-	fi
+    # Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
+    if [ "$WEB_APP" = true ]; then
+        SPIFFSFILE=littlefswebui-${BASENAME}
+    else
+        SPIFFSFILE=littlefs-${BASENAME}
+    fi
 
-	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	$ESPTOOL_CMD erase_flash
-	$ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
-	echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-	$ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
-	echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-	$ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
+    if [[ ! -f "$FILENAME" ]]; then
+        echo "Error: file ${FILENAME} wasn't found. Terminating."
+        exit 1
+    fi
+    if [[ ! -f "$OTAFILE" ]]; then
+        echo "Error: file ${OTAFILE} wasn't found. Terminating."
+        exit 1
+    fi
+    if [[ ! -f "$SPIFFSFILE" ]]; then
+        echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
+        exit 1
+    fi
+
+    echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
+    $ESPTOOL_CMD erase_flash
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
+    echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
+    echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
-	show_help
-	echo "Invalid file: ${FILENAME}"
+    show_help
+    echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/device-update.bat

@@ -8,27 +8,31 @@ SET "PYTHON="
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
+SET "CHANGE_MODE=0"
 
 GOTO getopts
 :help
 ECHO Flash image file to device, but leave existing system intact.
 ECHO.
-ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python]
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--change-mode]
 ECHO.
 ECHO Options:
-ECHO     -f filename      The .bin file to flash.  Custom to your device type and region. (required)
+ECHO     -f filename      The update .bin file to flash.  Custom to your device type and region. (required)
 ECHO                      The file must be located in this current directory.
 ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
 ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
 ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
 ECHO                      If supplied the script will use python.
 ECHO                      If not supplied the script will try to find esptool in Path.
+ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
 ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.6.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -44,15 +48,19 @@ IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
 IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
 IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+IF /I "%~1"=="--change-mode" SET "CHANGE_MODE=1"
 SHIFT
 GOTO getopts
 :endopts
 
+IF %CHANGE_MODE% EQU 1 GOTO skip-filename
+
 CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
 IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
     GOTO help
 ) ELSE (
+    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
     IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
         CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
         GOTO help
@@ -62,7 +70,6 @@ IF "__!FILENAME!__"=="____" (
     SET "FILENAME=!FILENAME:./=!"
 )
 
-CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
 CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
 IF NOT EXIST !FILENAME! (
     CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
@@ -71,12 +78,15 @@ IF NOT EXIST !FILENAME! (
 
 IF "!FILENAME:update=!"=="!FILENAME!" (
     CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
-    CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash update !FILENAME!."
+    CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
     GOTO eof
 ) ELSE (
     CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
 )
 
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
@@ -95,7 +105,7 @@ IF NOT "__%PYTHON%__"=="____" (
 
 CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
 !ESPTOOL_CMD! >nul 2>&1
-IF %ERRORLEVEL% GTR 2 (
+IF %ERRORLEVEL% GEQ 2 (
     @REM esptool exits with code 1 if help is displayed.
     CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
     EXIT /B 1
@@ -110,10 +120,17 @@ CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
 IF "__!ESPTOOL_PORT!__" == "____" (
     CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
 ) ELSE (
+    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
     CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
 )
 CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
+IF %CHANGE_MODE% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
 CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
@@ -134,6 +151,7 @@ EXIT /B %ERRORLEVEL%
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %CHANGE_MODE% EQU 1 GOTO :eof
 IF %ERRORLEVEL% NEQ 0 (
     CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
     EXIT /B %ERRORLEVEL%

bin/device-update.sh

@@ -1,6 +1,7 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+CHANGE_MODE=false
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -17,14 +18,15 @@ fi
 # Usage info
 show_help() {
 cat << EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--change-mode]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
-    
+    --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
+
 EOF
 }
 
@@ -35,14 +37,17 @@ while getopts ":hp:P:f:" opt; do
             show_help
             exit 0
             ;;
-        p)  export ESPTOOL_PORT=${OPTARG}
-	    ;;
+        p)  ESPTOOL_CMD="$ESPTOOL_CMD --port ${OPTARG}"
+            ;;
         P)  PYTHON=${OPTARG}
             ;;
         f)  FILENAME=${OPTARG}
             ;;
+	    --change-mode)
+            CHANGE_MODE=true
+            ;;
         *)
- 	        echo "Invalid flag."
+            echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -50,17 +55,22 @@ while getopts ":hp:P:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-    FILENAME=$1
+if [[ $CHANGE_MODE == true ]]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+    exit 0
+fi
+
+[ -z "$FILENAME" ]  && [ -n "$1" ] && {
+    FILENAME="$1"
     shift
 }
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
-	printf "Trying to flash update ${FILENAME}"
-	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
+    echo "Trying to flash update ${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
-	show_help
-	echo "Invalid file: ${FILENAME}"
+    show_help
+    echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/generate_ci_matrix.py

@@ -27,7 +27,7 @@ for subdir, dirs, files in os.walk(rootdir):
                 if c.startswith("env:"):
                     section = config[c].name[4:]
                     if "extends" in config[config[c].name]:
-                        if config[config[c].name]["extends"] == options[0] + "_base":
+                        if options[0] + "_base" in config[config[c].name]["extends"]:
                             if "board_level" in config[config[c].name]:
                                 if (
                                     config[config[c].name]["board_level"] == "extra"

bin/meshtasticd.service

@@ -5,10 +5,11 @@ StartLimitInterval=200
 StartLimitBurst=5
 
 [Service]
-User=root
-Group=root
+AmbientCapabilities=CAP_NET_BIND_SERVICE
+User=meshtasticd
+Group=meshtasticd
 Type=simple
-ExecStart=/usr/sbin/meshtasticd
+ExecStart=/usr/bin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
+cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.desktop

@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=Meshtastic
+Comment=Meshtastic App
+Exec=meshtasticd
+Icon=org.meshtastic.meshtasticd
+Terminal=true
+Type=Application
+Categories=Network;Chat;HamRadio;

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -0,0 +1,127 @@
+<?xml version='1.0' encoding='UTF-8'?>
+<component type="desktop-application">
+  <id>org.meshtastic.meshtasticd</id>
+
+  <name>Meshtastic</name>
+  <summary>Decentralized mesh communication</summary>
+
+  <metadata_license>CC-BY-4.0</metadata_license>
+  <project_license>GPL-3.0-or-later</project_license>
+
+  <developer id="org.meshtastic">
+    <name>Meshtastic</name>
+  </developer>
+
+  <description>
+    <p>
+      Meshtastic is an open source project for creating off-grid, affordable, and resilient communication with LoRa mesh networks.
+    </p>
+  </description>
+
+  <launchable type="desktop-id">org.meshtastic.meshtasticd.desktop</launchable>
+
+  <categories>
+    <category>Network</category>
+    <category>Chat</category>
+    <category>HamRadio</category>
+  </categories>
+  <keywords>
+    <keyword>mesh</keyword>
+    <keyword>LoRa</keyword>
+  </keywords>
+
+  <recommends>
+    <control>keyboard</control>
+    <control>pointing</control>
+    <control>touch</control>
+  </recommends>
+  <requires>
+    <display_length compare="ge">360</display_length>
+  </requires>
+
+  <branding>
+    <color type="primary" scheme_preference="light">#97be89</color>
+    <color type="primary" scheme_preference="dark">#206538</color>
+  </branding>
+
+  <content_rating type="oars-1.1">
+    <content_attribute id="social-chat">intense</content_attribute>
+    <content_attribute id="social-location">intense</content_attribute>
+  </content_rating>
+
+  <url type="bugtracker">https://github.com/meshtastic/firmware/issues</url>
+  <url type="homepage">https://meshtastic.org/</url>
+  <url type="donation">https://opencollective.com/meshtastic</url>
+  <url type="faq">https://meshtastic.org/docs/software/linux/usage/</url>
+  <url type="vcs-browser">https://github.com/meshtastic/firmware/</url>
+
+  <screenshots>
+    <screenshot type="default">
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_home_dashboard_dark.webp</image>
+      <caption>Home Dashboard</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_initial_boot.webp</image>
+      <caption>Setup</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_node_list_dark.webp</image>
+      <caption>Nodes List</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_list_dark.webp</image>
+      <caption>Chats List</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_message_dark.webp</image>
+      <caption>Messages</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_map_dark.webp</image>
+      <caption>Map</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_settings_dark.webp</image>
+      <caption>Settings</caption>
+    </screenshot>
+  </screenshots>
+
+  <releases>
+    <release version="2.7.1" date="2025-06-21">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.1</url>
+    </release>
+    <release version="2.7.0" date="2025-06-20">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.0</url>
+    </release>
+    <release version="2.6.13" date="2025-06-16">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.13</url>
+    </release>
+    <release version="2.6.12" date="2025-06-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.12</url>
+    </release>
+    <release version="2.6.11" date="2025-06-02">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.11</url>
+    </release>
+    <release version="2.6.10" date="2025-05-25">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.10</url>
+    </release>
+    <release version="2.6.9" date="2025-05-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.9</url>
+    </release>
+    <release version="2.6.8" date="2025-05-05">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.8</url>
+    </release>
+    <release version="2.6.7" date="2025-04-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.7</url>
+    </release>
+    <release version="2.6.6" date="2025-04-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.6</url>
+    </release>
+    <release version="2.6.5" date="2025-03-30">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.5</url>
+    </release>
+    <release version="2.6.4" date="2025-03-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.4</url>
+    </release>
+  </releases>
+</component>

bin/org.meshtastic.meshtasticd.svg

@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" width="512" height="512" viewBox="0 0 512 512" xml:space="preserve">
+<desc>Created with Fabric.js 4.6.0</desc>
+<defs>
+</defs>
+<g transform="matrix(1 0 0 1 256 256)" id="xYQ9Gk9Jwpgj_HMOXB3F_"  >
+<path style="stroke: rgb(213,130,139); stroke-width: 0; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: miter; stroke-miterlimit: 4; fill: rgb(103,234,148); fill-rule: nonzero; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-256, -256)" d="M 0 0 L 512 0 L 512 512 L 0 512 z" stroke-linecap="round" />
+</g>
+<g transform="matrix(1.79 0 0 1.79 313.74 258.36)" id="1xBsk2n9FZp60Rz1O-ceJ"  >
+<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-250.97, -362.41)" d="M 250.908 330.267 L 193.126 415.005 L 180.938 406.694 L 244.802 313.037 C 246.174 311.024 248.453 309.819 250.889 309.816 C 253.326 309.814 255.606 311.015 256.982 313.026 L 320.994 406.536 L 308.821 414.869 L 250.908 330.267 Z" stroke-linecap="round" />
+</g>
+<g transform="matrix(1.81 0 0 1.81 145 256.15)" id="KxN7E9YpbyPgz0S4z4Cl6"  >
+<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-115.14, -528.06)" d="M 87.642 581.398 L 154.757 482.977 L 142.638 474.713 L 75.523 573.134 L 87.642 581.398 Z" stroke-linecap="round" />
+</g>
+</svg>

bin/platformio-custom.py

@@ -83,7 +83,7 @@ if platform.name == "espressif32":
 
 if platform.name == "nordicnrf52":
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
                                         "Generating UF2 file"))
 
 Import("projenv")

bin/rpkg.macros

@@ -2,6 +2,10 @@ function meshtastic_version {
     meshtastic_version=$(python3 bin/buildinfo.py short)
     echo -n "$meshtastic_version"
 }
+function web_version {
+    web_version=$(cat bin/web.version)
+    echo -n "$web_version"
+}
 function git_commits_num {
     total_commits=$(git rev-list --all --count)
     echo -n "$total_commits"

bin/web.version

@@ -0,0 +1 @@
+2.5.3

boards/ThinkNode-M1.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_eink",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "elecrow eink",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.elecrow.com/thinknode-m1-meshtastic-lora-signal-transceiver-powered-by-nrf52840-with-154-screen-support-gps.html",
+  "vendor": "ELECROW"
+}

boards/crowpanel.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "ESP32-S3-WROOM-1-N16R8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-WROOM-1-N16R8 (16 MB Flash, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 524288,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "monitor": {
+    "speed": 115200
+  },
+  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
+  "vendor": "Espressif"
+}

boards/gat562_mesh_trial_tracker.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "GAT562 Mesh Trial Tracker",
+    "mcu": "nrf52840",
+    "variant": "gat562_mesh_trial_tracker",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino", "freertos"],
+  "name": "GAT562 Mesh Trial Tracker",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "http://www.gat-iot.com/",
+  "vendor": "GAT-IOT"
+}

boards/heltec_mesh_node_t114.json

@@ -48,6 +48,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
+  "url": "https://heltec.org/project/mesh-node-t114/",
   "vendor": "Heltec"
 }

boards/heltec_mesh_pocket.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "HT-n5262",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_pocket",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://heltec.org/project/meshpocket/",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_e213.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_e290.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_t190.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/seeed-sensecap-indicator.json

@@ -18,6 +18,7 @@
     "f_boot": "120000000L",
     "boot": "qio",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [["0x1A86", "0x7523"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/seeed-xiao-s3.json

@@ -15,6 +15,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [["0x2886", "0x0059"]],
     "mcu": "esp32s3",
     "variant": "seeed-xiao-s3"

boards/seeed_solar_node.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x2886", "0x0059"]],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "seeed_solar_node",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "seeed_solar_node",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}

boards/seeed_wio_tracker_L1.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x2886", "0x1668"]],
+    "usb_product": "TRACKER L1",
+    "mcu": "nrf52840",
+    "variant": "seeed_wio_tracker_L1",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "seeed_wio_tracker_L1",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Wio-Tracker-L1-p-6477.html",
+  "vendor": "Seeed Studio"
+}

boards/seeed_xiao_nrf52840_kit.json

@@ -7,9 +7,7 @@
     "cpu": "cortex-m4",
     "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
     "f_cpu": "64000000L",
-    "hwids": [
-      ["0x2886", "0x0166"]
-    ],
+    "hwids": [["0x2886", "0x0166"]],
     "usb_product": "XIAO-BOOT",
     "mcu": "nrf52840",
     "variant": "seeed_xiao_nrf52840_kit",

boards/t-watch-s3.json

@@ -16,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]
@@ -23,16 +24,16 @@
     "mcu": "esp32s3",
     "variant": "t-watch-s3"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth", "lora"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },
   "frameworks": ["arduino"],
   "name": "LilyGo T-Watch 2020 V3",
   "upload": {
-    "flash_size": "8MB",
+    "flash_size": "16MB",
     "maximum_ram_size": 327680,
-    "maximum_size": 8388608,
+    "maximum_size": 16777216,
     "require_upload_port": true,
     "use_1200bps_touch": true,
     "wait_for_upload_port": true,

debian/changelog

@@ -1,9 +1,28 @@
-meshtasticd (2.5.22.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.1.0) UNRELEASED; urgency=medium
 
+  [ Austin Lane ]
   * Initial packaging
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
- -- Austin Lane <github-actions[bot]@users.noreply.github.com>  Wed, 05 Feb 2025 01:10:33 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Sat, 21 Jun 2025 15:51:49 +0000

debian/ci_pack_sdeb.sh

@@ -5,13 +5,14 @@ export PLATFORMIO_PACKAGES_DIR=pio/packages
 export PLATFORMIO_CORE_DIR=pio/core
 
 # Download libraries to `pio`
-platformio pkg install -e native
-platformio pkg install -e native -t platformio/tool-scons@4.40502.0
+platformio pkg install -e native-tft
+platformio pkg install -e native-tft -t platformio/tool-scons@4.40502.0
 # Compress `pio` directory to prevent dh_clean from sanitizing it
 tar -cf pio.tar pio/
 rm -rf pio
-# Download the latest meshtastic/web release build.tar to `web.tar`
-curl -L https://github.com/meshtastic/web/releases/latest/download/build.tar -o web.tar
+# Download the meshtastic/web release build.tar to `web.tar`
+web_ver=$(cat bin/web.version)
+curl -L "https://github.com/meshtastic/web/releases/download/v$web_ver/build.tar" -o web.tar
 
 package=$(dpkg-parsechangelog --show-field Source)
 

debian/control

@@ -17,17 +17,23 @@ Build-Depends: debhelper-compat (= 13),
                libbluetooth-dev,
                libusb-1.0-0-dev,
                libi2c-dev,
+               libuv1-dev,
                openssl,
                libssl-dev,
                libulfius-dev,
-               liborcania-dev
+               liborcania-dev,
+               libx11-dev,
+               libinput-dev,
+               libxkbcommon-x11-dev
 Standards-Version: 4.6.2
 Homepage: https://github.com/meshtastic/firmware
 Rules-Requires-Root: no
 
 Package: meshtasticd
 Architecture: any
-Depends: ${misc:Depends}, ${shlibs:Depends}
+Depends: adduser,
+         ${misc:Depends},
+         ${shlibs:Depends}
 Description: Meshtastic daemon for communicating with Meshtastic devices
  Meshtastic is an off-grid text communication platform that uses inexpensive 
- LoRa radios.
+ LoRa radios.

debian/meshtasticd.dirs

@@ -1,5 +1,6 @@
+var/lib/meshtasticd
 etc/meshtasticd
 etc/meshtasticd/config.d
 etc/meshtasticd/available.d
 usr/share/meshtasticd/web
-etc/meshtasticd/ssl
+etc/meshtasticd/ssl

debian/meshtasticd.install

@@ -1,8 +1,8 @@
-.pio/build/native/meshtasticd  usr/sbin
+.pio/build/native-tft/meshtasticd  usr/bin
 
-bin/config.yaml                etc/meshtasticd
-bin/config.d/*                 etc/meshtasticd/available.d
+bin/config.yaml                    etc/meshtasticd
+bin/config.d/*                     etc/meshtasticd/available.d
 
-bin/meshtasticd.service        lib/systemd/system
+bin/meshtasticd.service            lib/systemd/system
 
-web/*                          usr/share/meshtasticd/web
+web/*                              usr/share/meshtasticd/web

debian/meshtasticd.postinst

@@ -0,0 +1,80 @@
+#!/bin/sh
+# postinst script for meshtasticd
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure|reconfigure)
+    # create spi, gpio groups (for udev rules)
+    # these groups already exist on Raspberry Pi OS
+        getent group spi >/dev/null 2>/dev/null || addgroup --system spi
+        getent group gpio >/dev/null 2>/dev/null || addgroup --system gpio
+    # create a meshtasticd group and user
+        getent passwd meshtasticd >/dev/null 2>/dev/null || adduser --system --home /var/lib/meshtasticd --no-create-home meshtasticd
+        getent group meshtasticd >/dev/null 2>/dev/null || addgroup --system meshtasticd
+        adduser meshtasticd meshtasticd >/dev/null 2>/dev/null
+        adduser meshtasticd spi >/dev/null 2>/dev/null
+        adduser meshtasticd gpio >/dev/null 2>/dev/null
+    # add meshtasticd user to appropriate groups (if they exist)
+        getent group plugdev >/dev/null 2>/dev/null && adduser meshtasticd plugdev >/dev/null 2>/dev/null
+        getent group dialout >/dev/null 2>/dev/null && adduser meshtasticd dialout >/dev/null 2>/dev/null
+        getent group i2c >/dev/null 2>/dev/null && adduser meshtasticd i2c >/dev/null 2>/dev/null
+        getent group video >/dev/null 2>/dev/null && adduser meshtasticd video >/dev/null 2>/dev/null
+        getent group audio >/dev/null 2>/dev/null && adduser meshtasticd audio >/dev/null 2>/dev/null
+        getent group input >/dev/null 2>/dev/null && adduser meshtasticd input >/dev/null 2>/dev/null
+
+
+    # migrate /root/.portduino to /var/lib/meshtasticd/.portduino
+    # should only run once, upon upgrade from < 2.6.9
+    if [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.6.9; then
+        if [ -d /root/.portduino ] && [ ! -e /var/lib/meshtasticd/.portduino ]; then
+            cp -r /root/.portduino /var/lib/meshtasticd/.portduino
+            echo "Migrated meshtasticd VFS from /root/.portduino to /var/lib/meshtasticd/.portduino"
+            echo "meshtasticd now runs as the 'meshtasticd' user, not 'root'."
+            echo "See https://github.com/meshtastic/firmware/pull/6718 for details"
+        fi
+    fi
+
+    if [ -d /var/lib/meshtasticd ]; then
+        chown -R meshtasticd:meshtasticd /var/lib/meshtasticd
+    fi
+
+    if [ -d /etc/meshtasticd ]; then
+        chown -R meshtasticd:meshtasticd /etc/meshtasticd
+    fi
+
+    if [ -d /usr/share/meshtasticd ]; then
+        chown -R meshtasticd:meshtasticd /usr/share/meshtasticd
+    fi
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/meshtasticd.postrm

@@ -0,0 +1,41 @@
+#!/bin/sh
+# postrm script for meshtasticd
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+      # Only remove /var/lib/meshtasticd on purge
+      if [ "${1}" = "purge" ] ; then
+          rm -rf /var/lib/meshtasticd
+      fi
+    ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/meshtasticd.udev

@@ -0,0 +1,7 @@
+# Set spidev ownership to 'spi' group
+SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
+# Allow access to USB CH341 devices
+SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
+# Set gpio ownership to 'gpio' group
+SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

debian/rules

@@ -26,7 +26,7 @@ override_dh_auto_build:
 	mkdir -p web && tar -xf web.tar -C web
 	gunzip web/ -r
 	# Build with platformio
-	$(PIO_ENV) platformio run -e native
+	$(PIO_ENV) platformio run -e native-tft
 	# Move the binary and default config to the correct name
-	mv .pio/build/native/program .pio/build/native/meshtasticd
+	mv .pio/build/native-tft/program .pio/build/native-tft/meshtasticd
 	cp bin/config-dist.yaml bin/config.yaml

extra_scripts/extra_stm32.py

@@ -0,0 +1,22 @@
+# trunk-ignore-all(ruff/F821)
+# trunk-ignore-all(flake8/F821): For SConstruct imports
+
+Import("env")
+# Custom HEX from ELF
+env.AddPostAction(
+    "$BUILD_DIR/${PROGNAME}.elf",
+    env.VerboseAction(
+        " ".join(
+            [
+                "$OBJCOPY",
+                "-O",
+                "ihex",
+                "-R",
+                ".eeprom",
+                "$BUILD_DIR/${PROGNAME}.elf",
+                "$BUILD_DIR/${PROGNAME}.hex",
+            ]
+        ),
+        "Building $BUILD_DIR/${PROGNAME}.hex",
+    ),
+)

meshtasticd.spec.rpkg

@@ -10,6 +10,8 @@
 # - https://docs.pagure.org/rpkg-util/v3/index.html
 # - https://docs.fedoraproject.org/en-US/packaging-guidelines/Versioning/
 
+%global  meshtasticd_user          meshtasticd   
+
 Name:           meshtasticd
 # Version Ex:   2.5.19
 Version:        {{{ meshtastic_version }}}
@@ -21,7 +23,7 @@ Summary:        Meshtastic daemon for communicating with Meshtastic devices
 License:        GPL-3.0
 URL:            https://github.com/meshtastic/firmware
 Source0:        {{{ git_dir_pack }}}
-Source1:        https://github.com/meshtastic/web/releases/latest/download/build.tar
+Source1:        https://github.com/meshtastic/web/releases/download/v{{{ web_version }}}/build.tar
 
 BuildRequires: systemd-rpm-macros
 BuildRequires: python3-devel
@@ -36,11 +38,18 @@ BuildRequires: pkgconfig(libgpiod)
 BuildRequires: pkgconfig(bluez)
 BuildRequires: pkgconfig(libusb-1.0)
 BuildRequires: libi2c-devel
+BuildRequires: pkgconfig(libuv)
 # Web components:
 BuildRequires: pkgconfig(openssl)
 BuildRequires: pkgconfig(liborcania)
 BuildRequires: pkgconfig(libyder)
 BuildRequires: pkgconfig(libulfius)
+# TFT components:
+BuildRequires: pkgconfig(x11)
+BuildRequires: pkgconfig(libinput)
+BuildRequires: pkgconfig(xkbcommon-x11)
+
+Requires:      systemd-udev
 
 %description
 Meshtastic daemon for controlling Meshtastic devices. Meshtastic is an off-grid
@@ -54,19 +63,29 @@ tar -xf %{SOURCE1} -C web
 gzip -dr web
 
 %build
-# Use the “native” environment from platformio to build a Linux binary
-platformio run -e native
+# Use the “native-tft” environment from platformio to build a Linux binary
+platformio run -e native-tft
 
 %install
-mkdir -p %{buildroot}%{_sbindir}
-install -m 0755 .pio/build/native/program %{buildroot}%{_sbindir}/meshtasticd
+# Install meshtasticd binary
+mkdir -p %{buildroot}%{_bindir}
+install -m 0755 .pio/build/native-tft/program %{buildroot}%{_bindir}/meshtasticd
 
+# Install portduino VFS dir
+install -p -d -m 0770 %{buildroot}%{_localstatedir}/lib/meshtasticd
+
+# Install udev rules
+mkdir -p %{buildroot}%{_udevrulesdir}
+install -m 0644 bin/99-meshtasticd-udev.rules %{buildroot}%{_udevrulesdir}/99-meshtasticd-udev.rules
+
+# Install config dirs
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd
 install -m 0644 bin/config-dist.yaml %{buildroot}%{_sysconfdir}/meshtasticd/config.yaml
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/config.d
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/available.d
 cp -r bin/config.d/* %{buildroot}%{_sysconfdir}/meshtasticd/available.d
 
+# Install systemd service
 install -D -m 0644 bin/meshtasticd.service %{buildroot}%{_unitdir}/meshtasticd.service
 
 # Install the web files under /usr/share/meshtasticd/web
@@ -75,10 +94,54 @@ cp -r web/* %{buildroot}%{_datadir}/meshtasticd/web
 # Install default SSL storage directory (for web)
 mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/ssl
 
+%pre
+# create spi group (for udev rules)
+getent group spi > /dev/null || groupadd -r spi
+# create a meshtasticd group and user
+getent group %{meshtasticd_user} > /dev/null || groupadd -r %{meshtasticd_user}
+getent passwd %{meshtasticd_user} > /dev/null || \
+    useradd -r -d %{_localstatedir}/lib/meshtasticd -g %{meshtasticd_user} -G spi \
+    -s /sbin/nologin -c "Meshtastic Daemon" %{meshtasticd_user}
+# add meshtasticd user to appropriate groups (if they exist)
+getent group gpio > /dev/null && usermod -a -G gpio %{meshtasticd_user} > /dev/null
+getent group plugdev > /dev/null && usermod -a -G plugdev %{meshtasticd_user} > /dev/null
+getent group dialout > /dev/null && usermod -a -G dialout %{meshtasticd_user} > /dev/null
+getent group i2c > /dev/null && usermod -a -G i2c %{meshtasticd_user} > /dev/null
+getent group video > /dev/null && usermod -a -G video %{meshtasticd_user} > /dev/null
+getent group audio > /dev/null && usermod -a -G audio %{meshtasticd_user} > /dev/null
+getent group input > /dev/null && usermod -a -G input %{meshtasticd_user} > /dev/null
+exit 0
+
+%triggerin -- meshtasticd < 2.6.9
+# migrate .portduino (if it exists and hasn’t already been copied)
+if [ -d /root/.portduino ] && [ ! -e /var/lib/meshtasticd/.portduino ]; then
+    mkdir -p /var/lib/meshtasticd
+    cp -r /root/.portduino /var/lib/meshtasticd/.portduino
+    chown -R %{meshtasticd_user}:%{meshtasticd_user} \
+        %{_localstatedir}/lib/meshtasticd || :
+    # Fix SELinux labels if present (no-op on non-SELinux systems)
+    restorecon -R /var/lib/meshtasticd/.portduino 2>/dev/null || :
+    echo "Migrated meshtasticd VFS from /root/.portduino to /var/lib/meshtasticd/.portduino"
+    echo "meshtasticd now runs as the 'meshtasticd' user, not 'root'."
+    echo "See https://github.com/meshtastic/firmware/pull/6718 for details"
+fi
+
+%post
+%systemd_post meshtasticd.service
+
+%preun
+%systemd_preun meshtasticd.service
+
+%postun
+%systemd_postun_with_restart meshtasticd.service
+
 %files
+%defattr(-,%{meshtasticd_user},%{meshtasticd_user})
 %license LICENSE
 %doc README.md
-%{_sbindir}/meshtasticd
+%{_bindir}/meshtasticd
+%dir %{_localstatedir}/lib/meshtasticd
+%{_udevrulesdir}/99-meshtasticd-udev.rules
 %dir %{_sysconfdir}/meshtasticd
 %dir %{_sysconfdir}/meshtasticd/config.d
 %dir %{_sysconfdir}/meshtasticd/available.d
@@ -91,4 +154,4 @@ mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/ssl
 %dir %{_sysconfdir}/meshtasticd/ssl
 
 %changelog
-%autochangelog
+%autochangelog

platformio.ini

@@ -50,18 +50,27 @@ build_flags = -Wno-missing-field-initializers
 	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
 	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
   	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
+	-DMESHTASTIC_EXCLUDE_GENERIC_THREAD_MODULE=1
+	-D MAX_THREADS=40 ; As we've split modules, we have more threads to manage
         #-DBUILD_EPOCH=$UNIX_TIME
         #-D OLED_PL=1
 
 monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
-	https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95
+	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0119501e9983bd894830b02f545c377ee08d66fe.zip
+	# renovate: datasource=custom.pio depName=OneButton packageName=mathertel/library/OneButton
 	mathertel/OneButton@2.6.1
-	https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-	https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
-	https://github.com/meshtastic/ArduinoThread.git#7c3ee9e1951551b949763b1f5280f8db1fa4068d
+	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
+	https://github.com/meshtastic/arduino-fsm/archive/7db3702bf0cfe97b783d6c72595e3f38e0b19159.zip
+	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
+	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
+	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
+	https://github.com/meshtastic/ArduinoThread/archive/7c3ee9e1951551b949763b1f5280f8db1fa4068d.zip
+	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
 	nanopb/Nanopb@0.4.91
+	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
 	erriez/ErriezCRC32@1.0.1
 
 ; Used for the code analysis in PIO Home / Inspect
@@ -77,6 +86,7 @@ check_flags =
 framework = arduino
 lib_deps =
 	${env.lib_deps}
+	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
 	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
@@ -84,57 +94,105 @@ build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/nic
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-	knolleary/PubSubClient@2.8
-	arduino-libraries/NTPClient@3.1.0
+	# renovate: datasource=custom.pio depName=TBPubSubClient packageName=thingsboard/library/TBPubSubClient
+	thingsboard/TBPubSubClient@2.12.1
+	# renovate: datasource=custom.pio depName=NTPClient packageName=arduino-libraries/library/NTPClient
+	arduino-libraries/NTPClient@3.2.1
+	# renovate: datasource=custom.pio depName=Syslog packageName=arcao/library/Syslog
 	arcao/Syslog@2.0.0
 
 [radiolib_base]
 lib_deps =
-	jgromes/RadioLib@7.1.2
+	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
+	jgromes/RadioLib@7.2.0
 
 [device-ui_base]
 lib_deps =
-	https://github.com/meshtastic/device-ui.git#74e739ed4532ca10393df9fc89ae5a22f0bab2b1
+	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
+	https://github.com/meshtastic/device-ui/archive/cdc6e5bdeedb8293d10e4a02be6ca64e95a7c515.zip
 
 ; Common libs for environmental measurements in telemetry module
-; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-	adafruit/Adafruit BusIO@1.16.2
-	adafruit/Adafruit Unified Sensor@1.1.14
+	# renovate: datasource=custom.pio depName=Adafruit BusIO packageName=adafruit/library/Adafruit BusIO
+	adafruit/Adafruit BusIO@1.17.1
+	# renovate: datasource=custom.pio depName=Adafruit Unified Sensor packageName=adafruit/library/Adafruit Unified Sensor
+	adafruit/Adafruit Unified Sensor@1.1.15
+	# renovate: datasource=custom.pio depName=Adafruit BMP280 packageName=adafruit/library/Adafruit BMP280 Library
 	adafruit/Adafruit BMP280 Library@2.6.8
+	# renovate: datasource=custom.pio depName=Adafruit BMP085 packageName=adafruit/library/Adafruit BMP085 Library
 	adafruit/Adafruit BMP085 Library@1.2.4
-	adafruit/Adafruit BME280 Library@2.2.4
-	adafruit/Adafruit BMP3XX Library@2.1.5
+	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
+	adafruit/Adafruit BME280 Library@2.3.0
+	# renovate: datasource=custom.pio depName=Adafruit DPS310 packageName=adafruit/library/Adafruit DPS310
 	adafruit/Adafruit DPS310@1.1.5
+	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
 	adafruit/Adafruit MCP9808 Library@2.0.2
+	# renovate: datasource=custom.pio depName=Adafruit INA260 packageName=adafruit/library/Adafruit INA260 Library
 	adafruit/Adafruit INA260 Library@1.5.2
+	# renovate: datasource=custom.pio depName=Adafruit INA219 packageName=adafruit/library/Adafruit INA219
 	adafruit/Adafruit INA219@1.2.3
-	adafruit/Adafruit MAX1704X@1.0.3
-	adafruit/Adafruit SHTC3 Library@1.0.1
-	adafruit/Adafruit LPS2X@2.0.6
-	adafruit/Adafruit SHT31 Library@2.2.2
-	adafruit/Adafruit PM25 AQI Sensor@1.1.1
+	# renovate: datasource=custom.pio depName=Adafruit PM25 AQI Sensor packageName=adafruit/library/Adafruit PM25 AQI Sensor
+	adafruit/Adafruit PM25 AQI Sensor@2.0.0
+	# renovate: datasource=custom.pio depName=Adafruit MPU6050 packageName=adafruit/library/Adafruit MPU6050
 	adafruit/Adafruit MPU6050@2.2.6
+	# renovate: datasource=custom.pio depName=Adafruit LIS3DH packageName=adafruit/library/Adafruit LIS3DH
 	adafruit/Adafruit LIS3DH@1.3.0
+	# renovate: datasource=custom.pio depName=Adafruit AHTX0 packageName=adafruit/library/Adafruit AHTX0
 	adafruit/Adafruit AHTX0@2.0.5
-	adafruit/Adafruit LSM6DS@4.7.3
-	adafruit/Adafruit VEML7700 Library@2.1.6
-	adafruit/Adafruit SHT4x Library@1.0.5
+	# renovate: datasource=custom.pio depName=Adafruit LSM6DS packageName=adafruit/library/Adafruit LSM6DS
+	adafruit/Adafruit LSM6DS@4.7.4
+	# renovate: datasource=custom.pio depName=Adafruit TSL2591 packageName=adafruit/library/Adafruit TSL2591 Library
 	adafruit/Adafruit TSL2591 Library@1.4.5
-	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
-	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.2.13
-	ClosedCube OPT3001@1.1.2
+	# renovate: datasource=custom.pio depName=EmotiBit MLX90632 packageName=emotibit/library/EmotiBit MLX90632
 	emotibit/EmotiBit MLX90632@1.0.8
+	# renovate: datasource=custom.pio depName=Adafruit MLX90614 packageName=adafruit/library/Adafruit MLX90614 Library
 	adafruit/Adafruit MLX90614 Library@2.1.5
-	https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
-	boschsensortec/BME68x Sensor Library@1.1.40407
-	https://github.com/KodinLanewave/INA3221@1.0.1
+	# renovate: datasource=github-tags depName=INA3221 packageName=KodinLanewave/INA3221
+	https://github.com/KodinLanewave/INA3221/archive/1.0.1.zip
+	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
+	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
 	dfrobot/DFRobot_RTU@1.0.3
-	https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d
-	https://github.com/DFRobot/DFRobot_RainfallSensor#38fea5e02b40a5430be6dab39a99a6f6347d667e
-	robtillaart/INA226@0.6.0
-
-	; Health Sensor Libraries
+	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
+	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
+	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
+	robtillaart/INA226@0.6.4
+	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
+	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
+	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.3.2
+	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
+	adafruit/Adafruit LTR390 Library@1.1.2
+	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
+	adafruit/Adafruit PCT2075@1.0.5
+	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
+	dfrobot/DFRobot_BMM150@1.0.0
+  
+  ; (not included in native / portduino)
+[environmental_extra]
+lib_deps =
+	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
+	adafruit/Adafruit BMP3XX Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit MAX1704X packageName=adafruit/library/Adafruit MAX1704X
+	adafruit/Adafruit MAX1704X@1.0.3
+	# renovate: datasource=custom.pio depName=Adafruit SHTC3 packageName=adafruit/library/Adafruit SHTC3 Library
+	adafruit/Adafruit SHTC3 Library@1.0.1
+	# renovate: datasource=custom.pio depName=Adafruit LPS2X packageName=adafruit/library/Adafruit LPS2X
+	adafruit/Adafruit LPS2X@2.0.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT31 packageName=adafruit/library/Adafruit SHT31 Library
+	adafruit/Adafruit SHT31 Library@2.2.2
+	# renovate: datasource=custom.pio depName=Adafruit VEML7700 packageName=adafruit/library/Adafruit VEML7700 Library
+	adafruit/Adafruit VEML7700 Library@2.1.6
+	# renovate: datasource=custom.pio depName=Adafruit SHT4x packageName=adafruit/library/Adafruit SHT4x Library
+	adafruit/Adafruit SHT4x Library@1.0.5
+	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
+	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
+	ClosedCube OPT3001@1.1.2
+	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
+	boschsensortec/bsec2@1.10.2610
+	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
+	boschsensortec/BME68x Sensor Library@1.3.40408
+	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
+	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip

renovate.json

@@ -0,0 +1,99 @@
+{
+  "$schema": "https://docs.renovatebot.com/renovate-schema.json",
+  "extends": [
+    ":dependencyDashboard",
+    ":semanticCommitTypeAll(chore)",
+    ":ignoreModulesAndTests",
+    "group:recommended",
+    "replacements:all",
+    "workarounds:all"
+  ],
+  "forkProcessing": "enabled",
+  "ignoreDeps": [
+    "protobufs"
+  ],
+  "git-submodules": {
+    "enabled": true
+  },
+  "pip_requirements": {
+    "managerFilePatterns": [
+      "/bin/bump_metainfo/requirements.txt/"
+    ]
+  },
+  "commitMessageTopic": "{{depName}}",
+  "labels": [
+    "dependencies"
+  ],
+  "customDatasources": {
+    "pio": {
+      "description": "PlatformIO Registry",
+      "defaultRegistryUrlTemplate": "https://api.registry.platformio.org/v3/packages/{{packageName}}",
+      "format": "json",
+      "transformTemplates": [
+        "{\"releases\": [$map($.versions, function($v) { { \"version\": $v.name, \"releaseTimestamp\": $v.released_at } })], \"homepage\": $encodeUrl($join([\"https://registry.platformio.org/\",$.type,\"/\",$.owner.username,\"/\",$.name])) }"
+      ]
+    }
+  },
+  "customManagers": [
+    {
+      "customType": "regex",
+      "description": "Match meshtastic/web version",
+      "managerFilePatterns": [
+        "/bin/web.version/"
+      ],
+      "matchStrings": [
+        "(?<currentValue>.+)$"
+      ],
+      "datasourceTemplate": "github-releases",
+      "depNameTemplate": "meshtastic/web",
+      "versioningTemplate": "semver-coerced"
+    },
+    {
+      "customType": "regex",
+      "description": "Match normal PIO dependencies",
+      "managerFilePatterns": [
+        "/.*\\.ini$/"
+      ],
+      "matchStrings": [
+        "# renovate: datasource=(?<datasource>.*?)(?: depName=(?<depName>.+?))? packageName=(?<packageName>.+?)(?: versioning=(?<versioning>[a-z-]+?))?\\s+?.+?@(?<currentValue>.+?)\\s"
+      ],
+      "versioningTemplate": "{{#if versioning}}{{{versioning}}}{{else}}semver-coerced{{/if}}"
+    },
+    {
+      "customType": "regex",
+      "description": "Match PIO zipped dependencies with github tag ref",
+      "managerFilePatterns": [
+        "/.*\\.ini$/"
+      ],
+      "matchStrings": [
+        "# renovate: datasource=github-tags(?: depName=(?<depName>.+?))? packageName=(?<packageName>.+?)(?: versioning=(?<versioning>[a-z-]+?))?\\s+?https://.+?archive/(?<currentValue>.+?).zip\\s"
+      ],
+      "datasourceTemplate": "github-tags",
+      "versioningTemplate": "{{#if versioning}}{{{versioning}}}{{else}}semver-coerced{{/if}}"
+    },
+    {
+      "customType": "regex",
+      "description": "Match PIO zipped dependencies with git commit ref",
+      "managerFilePatterns": [
+        "/.*\\.ini$/"
+      ],
+      "matchStrings": [
+        "# renovate: datasource=git-refs(?: depName=(?<depName>.+?))? packageName=(?<packageName>.+?)(?: versioning=(?<versioning>[a-z-]+?))?\\sgitBranch=(?<gitBranch>.+?)\\s+?https://.+?archive/(?<currentDigest>.+?).zip\\s"
+      ],
+      "datasourceTemplate": "git-refs",
+      "currentValueTemplate": "{{{gitBranch}}}",
+      "versioningTemplate": "{{#if versioning}}{{{versioning}}}{{else}}git{{/if}}"
+    }
+  ],
+  "packageRules": [
+    {
+      "matchDepNames": [
+        "meshtastic/device-ui"
+      ],
+      "reviewers": [
+        "mverch67"
+      ],
+      "changelogUrl": "https://github.com/meshtastic/device-ui/compare/{{currentDigest}}...{{newDigest}}"
+    }
+  ]
+}

src/AmbientLightingThread.h

@@ -6,6 +6,11 @@
 NCP5623 rgb;
 #endif
 
+#ifdef HAS_LP5562
+#include <graphics/NomadStarLED.h>
+LP5562 rgbw;
+#endif
+
 #ifdef HAS_NEOPIXEL
 #include <graphics/NeoPixel.h>
 Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
@@ -26,7 +31,7 @@ class AmbientLightingThread : public concurrency::OSThread
         notifyDeepSleepObserver.observe(&notifyDeepSleep); // Let us know when shutdown() is issued.
 
 // Enables Ambient Lighting by default if conditions are meet.
-#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef HAS_RGB_LED
 #ifdef ENABLE_AMBIENTLIGHTING
         moduleConfig.ambient_lighting.led_state = true;
 #endif
@@ -39,7 +44,7 @@ class AmbientLightingThread : public concurrency::OSThread
         // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
         // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
 
-#ifdef HAS_NCP5623
+#if defined(HAS_NCP5623) || defined(HAS_LP5562)
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
             LOG_DEBUG("AmbientLighting Disable due to no RGB leds found on I2C bus");
@@ -47,7 +52,7 @@ class AmbientLightingThread : public concurrency::OSThread
             return;
         }
 #endif
-#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef HAS_RGB_LED
         if (!moduleConfig.ambient_lighting.led_state) {
             LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF");
             disable();
@@ -58,66 +63,78 @@ class AmbientLightingThread : public concurrency::OSThread
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
 #endif
+#ifdef HAS_LP5562
+            if (_type == ScanI2C::LP5562) {
+                rgbw.begin();
+#endif
 #ifdef RGBLED_RED
-            pinMode(RGBLED_RED, OUTPUT);
-            pinMode(RGBLED_GREEN, OUTPUT);
-            pinMode(RGBLED_BLUE, OUTPUT);
+                pinMode(RGBLED_RED, OUTPUT);
+                pinMode(RGBLED_GREEN, OUTPUT);
+                pinMode(RGBLED_BLUE, OUTPUT);
 #endif
 #ifdef HAS_NEOPIXEL
-            pixels.begin(); // Initialise the pixel(s)
-            pixels.clear(); // Set all pixel colors to 'off'
-            pixels.setBrightness(moduleConfig.ambient_lighting.current);
+                pixels.begin(); // Initialise the pixel(s)
+                pixels.clear(); // Set all pixel colors to 'off'
+                pixels.setBrightness(moduleConfig.ambient_lighting.current);
 #endif
-            setLighting();
+                setLighting();
+#endif
+#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+            }
 #endif
-#ifdef HAS_NCP5623
         }
-#endif
-    }
 
-  protected:
-    int32_t runOnce() override
-    {
-#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
-#ifdef HAS_NCP5623
-        if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+      protected:
+        int32_t runOnce() override
+        {
+#ifdef HAS_RGB_LED
+#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+            if ((_type == ScanI2C::NCP5623 || _type == ScanI2C::LP5562) && moduleConfig.ambient_lighting.led_state) {
 #endif
-            setLighting();
-            return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
-#ifdef HAS_NCP5623
+                setLighting();
+                return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
+#if defined(HAS_NCP5623) || defined(HAS_LP5562)
+            }
+#endif
+#endif
+            return disable();
         }
-#endif
-#endif
-        return disable();
-    }
 
-    // When shutdown() is issued, setLightingOff will be called.
-    CallbackObserver<AmbientLightingThread, void *> notifyDeepSleepObserver =
-        CallbackObserver<AmbientLightingThread, void *>(this, &AmbientLightingThread::setLightingOff);
+        // When shutdown() is issued, setLightingOff will be called.
+        CallbackObserver<AmbientLightingThread, void *> notifyDeepSleepObserver =
+            CallbackObserver<AmbientLightingThread, void *>(this, &AmbientLightingThread::setLightingOff);
 
-  private:
-    ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
+      private:
+        ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
 
-    // Turn RGB lighting off, is used in junction to shutdown()
-    int setLightingOff(void *unused)
-    {
+        // Turn RGB lighting off, is used in junction to shutdown()
+        int setLightingOff(void *unused)
+        {
 #ifdef HAS_NCP5623
-        rgb.setCurrent(0);
-        rgb.setRed(0);
-        rgb.setGreen(0);
-        rgb.setBlue(0);
-        LOG_INFO("OFF: NCP5623 Ambient lighting");
+            rgb.setCurrent(0);
+            rgb.setRed(0);
+            rgb.setGreen(0);
+            rgb.setBlue(0);
+            LOG_INFO("OFF: NCP5623 Ambient lighting");
+#endif
+#ifdef HAS_LP5562
+            rgbw.setCurrent(0);
+            rgbw.setRed(0);
+            rgbw.setGreen(0);
+            rgbw.setBlue(0);
+            rgbw.setWhite(0);
+            LOG_INFO("OFF: LP5562 Ambient lighting");
 #endif
 #ifdef HAS_NEOPIXEL
-        pixels.clear();
-        pixels.show();
-        LOG_INFO("OFF: NeoPixel Ambient lighting");
+            pixels.clear();
+            pixels.show();
+            LOG_INFO("OFF: NeoPixel Ambient lighting");
 #endif
 #ifdef RGBLED_CA
-        analogWrite(RGBLED_RED, 255 - 0);
-        analogWrite(RGBLED_GREEN, 255 - 0);
-        analogWrite(RGBLED_BLUE, 255 - 0);
-        LOG_INFO("OFF: Ambient light RGB Common Anode");
+            analogWrite(RGBLED_RED, 255 - 0);
+            analogWrite(RGBLED_GREEN, 255 - 0);
+            analogWrite(RGBLED_BLUE, 255 - 0);
+            LOG_INFO("OFF: Ambient light RGB Common Anode");
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, 0);
         analogWrite(RGBLED_GREEN, 0);
@@ -125,48 +142,57 @@ class AmbientLightingThread : public concurrency::OSThread
         LOG_INFO("OFF: Ambient light RGB Common Cathode");
 #endif
 #ifdef UNPHONE
-        unphone.rgb(0, 0, 0);
-        LOG_INFO("OFF: unPhone Ambient lighting");
+            unphone.rgb(0, 0, 0);
+            LOG_INFO("OFF: unPhone Ambient lighting");
 #endif
-        return 0;
-    }
+            return 0;
+        }
 
-    void setLighting()
-    {
+        void setLighting()
+        {
 #ifdef HAS_NCP5623
-        rgb.setCurrent(moduleConfig.ambient_lighting.current);
-        rgb.setRed(moduleConfig.ambient_lighting.red);
-        rgb.setGreen(moduleConfig.ambient_lighting.green);
-        rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
-                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            rgb.setCurrent(moduleConfig.ambient_lighting.current);
+            rgb.setRed(moduleConfig.ambient_lighting.red);
+            rgb.setGreen(moduleConfig.ambient_lighting.green);
+            rgb.setBlue(moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef HAS_LP5562
+            rgbw.setCurrent(moduleConfig.ambient_lighting.current);
+            rgbw.setRed(moduleConfig.ambient_lighting.red);
+            rgbw.setGreen(moduleConfig.ambient_lighting.green);
+            rgbw.setBlue(moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init LP5562 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current,
+                      moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef HAS_NEOPIXEL
-        pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
-                                 moduleConfig.ambient_lighting.blue),
-                    0, NEOPIXEL_COUNT);
+            pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                     moduleConfig.ambient_lighting.blue),
+                        0, NEOPIXEL_COUNT);
 
 // RadioMaster Bandit has addressable LED at the two buttons
 // this allow us to set different lighting for them in variant.h file.
 #ifdef RADIOMASTER_900_BANDIT
 #if defined(BUTTON1_COLOR) && defined(BUTTON1_COLOR_INDEX)
-        pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
+            pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
 #endif
 #if defined(BUTTON2_COLOR) && defined(BUTTON2_COLOR_INDEX)
-        pixels.fill(BUTTON2_COLOR, BUTTON2_COLOR_INDEX, 1);
+            pixels.fill(BUTTON2_COLOR, BUTTON2_COLOR_INDEX, 1);
 #endif
 #endif
-        pixels.show();
-        LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
-                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
-                  moduleConfig.ambient_lighting.blue);
+            pixels.show();
+            LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+                      moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef RGBLED_CA
-        analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
-        analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
-        analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
-                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+            analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+            analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
@@ -175,11 +201,12 @@ class AmbientLightingThread : public concurrency::OSThread
                   moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
-        unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
-                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+            unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                        moduleConfig.ambient_lighting.blue);
+            LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+                      moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
-    }
-};
+        }
+    };
 
 } // namespace concurrency

src/AudioThread.h

@@ -41,11 +41,23 @@ class AudioThread : public concurrency::OSThread
             delete i2sRtttl;
             i2sRtttl = nullptr;
         }
-        if (rtttlFile != nullptr) {
-            delete rtttlFile;
-            rtttlFile = nullptr;
+        delete rtttlFile;
+        rtttlFile = nullptr;
+
+        setCPUFast(false);
+    }
+
+    void readAloud(const char *text)
+    {
+        if (i2sRtttl != nullptr) {
+            i2sRtttl->stop();
+            delete i2sRtttl;
+            i2sRtttl = nullptr;
         }
 
+        ESP8266SAM *sam = new ESP8266SAM;
+        sam->Say(audioOut, text);
+        delete sam;
         setCPUFast(false);
     }
 

src/BluetoothStatus.h

@@ -88,10 +88,16 @@ class BluetoothStatus : public Status
                 break;
             case ConnectionState::CONNECTED:
                 LOG_DEBUG("BluetoothStatus CONNECTED");
+#ifdef BLE_LED
+                digitalWrite(BLE_LED, HIGH);
+#endif
                 break;
 
             case ConnectionState::DISCONNECTED:
                 LOG_DEBUG("BluetoothStatus DISCONNECTED");
+#ifdef BLE_LED
+                digitalWrite(BLE_LED, LOW);
+#endif
                 break;
             }
         }
@@ -102,4 +108,4 @@ class BluetoothStatus : public Status
 
 } // namespace meshtastic
 
-extern meshtastic::BluetoothStatus *bluetoothStatus;
+extern meshtastic::BluetoothStatus *bluetoothStatus;

src/ButtonThread.cpp

@@ -1,398 +0,0 @@
-#include "ButtonThread.h"
-
-#include "configuration.h"
-#if !MESHTASTIC_EXCLUDE_GPS
-#include "GPS.h"
-#endif
-#include "MeshService.h"
-#include "PowerFSM.h"
-#include "RadioLibInterface.h"
-#include "buzz.h"
-#include "main.h"
-#include "modules/ExternalNotificationModule.h"
-#include "power.h"
-#include "sleep.h"
-#ifdef ARCH_PORTDUINO
-#include "platform/portduino/PortduinoGlue.h"
-#endif
-
-#define DEBUG_BUTTONS 0
-#if DEBUG_BUTTONS
-#define LOG_BUTTON(...) LOG_DEBUG(__VA_ARGS__)
-#else
-#define LOG_BUTTON(...)
-#endif
-
-using namespace concurrency;
-
-ButtonThread *buttonThread; // Declared extern in header
-volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
-
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
-OneButton ButtonThread::userButton; // Get reference to static member
-#endif
-ButtonThread::ButtonThread() : OSThread("Button")
-{
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
-
-#if defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
-        this->userButton = OneButton(settingsMap[user], true, true);
-        LOG_DEBUG("Use GPIO%02d for button", settingsMap[user]);
-    }
-#elif defined(BUTTON_PIN)
-#if !defined(USERPREFS_BUTTON_PIN)
-    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;           // Resolved button pin
-#endif
-#ifdef USERPREFS_BUTTON_PIN
-    int pin = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN; // Resolved button pin
-#endif
-#if defined(HELTEC_CAPSULE_SENSOR_V3)
-    this->userButton = OneButton(pin, false, false);
-#elif defined(BUTTON_ACTIVE_LOW)
-    this->userButton = OneButton(pin, BUTTON_ACTIVE_LOW, BUTTON_ACTIVE_PULLUP);
-#else
-    this->userButton = OneButton(pin, true, true);
-#endif
-    LOG_DEBUG("Use GPIO%02d for button", pin);
-#endif
-
-#ifdef INPUT_PULLUP_SENSE
-    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-#ifdef BUTTON_SENSE_TYPE
-    pinMode(pin, BUTTON_SENSE_TYPE);
-#else
-    pinMode(pin, INPUT_PULLUP_SENSE);
-#endif
-#endif
-
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
-    userButton.attachClick(userButtonPressed);
-    userButton.setClickMs(BUTTON_CLICK_MS);
-    userButton.setPressMs(BUTTON_LONGPRESS_MS);
-    userButton.setDebounceMs(1);
-    userButton.attachDoubleClick(userButtonDoublePressed);
-    userButton.attachMultiClick(userButtonMultiPressed, this); // Reference to instance: get click count from non-static OneButton
-#ifndef T_DECK // T-Deck immediately wakes up after shutdown, so disable this function
-    userButton.attachLongPressStart(userButtonPressedLongStart);
-    userButton.attachLongPressStop(userButtonPressedLongStop);
-#endif
-#endif
-
-#ifdef BUTTON_PIN_ALT
-    userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
-#ifdef INPUT_PULLUP_SENSE
-    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-    pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
-#endif
-    userButtonAlt.attachClick(userButtonPressed);
-    userButtonAlt.setClickMs(BUTTON_CLICK_MS);
-    userButtonAlt.setPressMs(BUTTON_LONGPRESS_MS);
-    userButtonAlt.setDebounceMs(1);
-    userButtonAlt.attachDoubleClick(userButtonDoublePressed);
-    userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
-    userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
-#endif
-
-#ifdef BUTTON_PIN_TOUCH
-    userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
-    userButtonTouch.setPressMs(BUTTON_TOUCH_MS);
-    userButtonTouch.attachLongPressStart(touchPressedLongStart); // Better handling with longpress than click?
-#endif
-
-#ifdef ARCH_ESP32
-    // Register callbacks for before and after lightsleep
-    // Used to detach and reattach interrupts
-    lsObserver.observe(&notifyLightSleep);
-    lsEndObserver.observe(&notifyLightSleepEnd);
-#endif
-
-    attachButtonInterrupts();
-#endif
-}
-
-int32_t ButtonThread::runOnce()
-{
-    // If the button is pressed we suppress CPU sleep until release
-    canSleep = true; // Assume we should not keep the board awake
-
-#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
-    userButton.tick();
-    canSleep &= userButton.isIdle();
-#elif defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
-        userButton.tick();
-        canSleep &= userButton.isIdle();
-    }
-#endif
-#ifdef BUTTON_PIN_ALT
-    userButtonAlt.tick();
-    canSleep &= userButtonAlt.isIdle();
-#endif
-#ifdef BUTTON_PIN_TOUCH
-    userButtonTouch.tick();
-    canSleep &= userButtonTouch.isIdle();
-#endif
-
-    if (btnEvent != BUTTON_EVENT_NONE) {
-        switch (btnEvent) {
-        case BUTTON_EVENT_PRESSED: {
-            LOG_BUTTON("press!");
-            // If a nag notification is running, stop it and prevent other actions
-            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
-                externalNotificationModule->stopNow();
-                return 50;
-            }
-#ifdef BUTTON_PIN
-#if !defined(USERPREFS_BUTTON_PIN)
-            if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-            if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
-#endif
-                 moduleConfig.canned_message.inputbroker_pin_press) ||
-                !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
-                !moduleConfig.canned_message.enabled) {
-                powerFSM.trigger(EVENT_PRESS);
-            }
-#endif
-#if defined(ARCH_PORTDUINO)
-            if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
-                    (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
-                !moduleConfig.canned_message.enabled) {
-                powerFSM.trigger(EVENT_PRESS);
-            }
-#endif
-            break;
-        }
-
-        case BUTTON_EVENT_DOUBLE_PRESSED: {
-            LOG_BUTTON("Double press!");
-            service->refreshLocalMeshNode();
-            auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
-            if (screen) {
-                if (sentPosition)
-                    screen->print("Sent ad-hoc position\n");
-                else
-                    screen->print("Sent ad-hoc nodeinfo\n");
-                screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
-            }
-            break;
-        }
-
-        case BUTTON_EVENT_MULTI_PRESSED: {
-            LOG_BUTTON("Mulitipress! %hux", multipressClickCount);
-            switch (multipressClickCount) {
-#if HAS_GPS
-            // 3 clicks: toggle GPS
-            case 3:
-                if (!config.device.disable_triple_click && (gps != nullptr)) {
-                    gps->toggleGpsMode();
-                    if (screen)
-                        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
-                }
-                break;
-#endif
-#if defined(USE_EINK) && defined(PIN_EINK_EN) // i.e. T-Echo
-            // 4 clicks: toggle backlight
-            case 4:
-                digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-                break;
-#endif
-#if defined(RAK_4631)
-            // 5 clicks: start accelerometer/magenetometer calibration for 30 seconds
-            case 5:
-                if (accelerometerThread) {
-                    accelerometerThread->calibrate(30);
-                }
-                break;
-            // 6 clicks: start accelerometer/magenetometer calibration for 60 seconds
-            case 6:
-                if (accelerometerThread) {
-                    accelerometerThread->calibrate(60);
-                }
-                break;
-#endif
-            // No valid multipress action
-            default:
-                break;
-            } // end switch: click count
-
-            break;
-        } // end multipress event
-
-        case BUTTON_EVENT_LONG_PRESSED: {
-            LOG_BUTTON("Long press!");
-            powerFSM.trigger(EVENT_PRESS);
-            if (screen) {
-                screen->startAlert("Shutting down...");
-            }
-            playBeep();
-            break;
-        }
-
-        // Do actual shutdown when button released, otherwise the button release
-        // may wake the board immediatedly.
-        case BUTTON_EVENT_LONG_RELEASED: {
-            LOG_INFO("Shutdown from long press");
-            playShutdownMelody();
-            delay(3000);
-            power->shutdown();
-            break;
-        }
-
-#ifdef BUTTON_PIN_TOUCH
-        case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
-            LOG_BUTTON("Touch press!");
-            if (screen) {
-                // Wake if asleep
-                if (powerFSM.getState() == &stateDARK)
-                    powerFSM.trigger(EVENT_PRESS);
-
-                // Update display (legacy behaviour)
-                screen->forceDisplay();
-            }
-            break;
-        }
-#endif // BUTTON_PIN_TOUCH
-
-        default:
-            break;
-        }
-        btnEvent = BUTTON_EVENT_NONE;
-    }
-
-    return 50;
-}
-
-/*
- * Attach (or re-attach) hardware interrupts for buttons
- * Public method. Used outside class when waking from MCU sleep
- */
-void ButtonThread::attachButtonInterrupts()
-{
-#if defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
-        wakeOnIrq(settingsMap[user], FALLING);
-#elif defined(BUTTON_PIN)
-    // Interrupt for user button, during normal use. Improves responsiveness.
-    attachInterrupt(
-#if !defined(USERPREFS_BUTTON_PIN)
-        config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-        config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN,
-#endif
-        []() {
-            ButtonThread::userButton.tick();
-            runASAP = true;
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-        },
-        CHANGE);
-#endif
-
-#ifdef BUTTON_PIN_ALT
-    wakeOnIrq(BUTTON_PIN_ALT, FALLING);
-#endif
-
-#ifdef BUTTON_PIN_TOUCH
-    wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
-#endif
-}
-
-/*
- * Detach the "normal" button interrupts.
- * Public method. Used before attaching a "wake-on-button" interrupt for MCU sleep
- */
-void ButtonThread::detachButtonInterrupts()
-{
-#if defined(ARCH_PORTDUINO)
-    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
-        detachInterrupt(settingsMap[user]);
-#elif defined(BUTTON_PIN)
-#if !defined(USERPREFS_BUTTON_PIN)
-    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
-#endif
-#if defined(USERPREFS_BUTTON_PIN)
-    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN);
-#endif
-#endif
-
-#ifdef BUTTON_PIN_ALT
-    detachInterrupt(BUTTON_PIN_ALT);
-#endif
-
-#ifdef BUTTON_PIN_TOUCH
-    detachInterrupt(BUTTON_PIN_TOUCH);
-#endif
-}
-
-#ifdef ARCH_ESP32
-
-// Detach our class' interrupts before lightsleep
-// Allows sleep.cpp to configure its own interrupts, which wake the device on user-button press
-int ButtonThread::beforeLightSleep(void *unused)
-{
-    detachButtonInterrupts();
-    return 0; // Indicates success
-}
-
-// Reconfigure our interrupts
-// Our class' interrupts were disconnected during sleep, to allow the user button to wake the device from sleep
-int ButtonThread::afterLightSleep(esp_sleep_wakeup_cause_t cause)
-{
-    attachButtonInterrupts();
-    return 0; // Indicates success
-}
-
-#endif
-
-/**
- * Watch a GPIO and if we get an IRQ, wake the main thread.
- * Use to add wake on button press
- */
-void ButtonThread::wakeOnIrq(int irq, int mode)
-{
-    attachInterrupt(
-        irq,
-        [] {
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-            runASAP = true;
-        },
-        FALLING);
-}
-
-// Static callback
-void ButtonThread::userButtonMultiPressed(void *callerThread)
-{
-    // Grab click count from non-static button, while the info is still valid
-    ButtonThread *thread = (ButtonThread *)callerThread;
-    thread->storeClickCount();
-
-    // Then handle later, in the usual way
-    btnEvent = BUTTON_EVENT_MULTI_PRESSED;
-}
-
-// Non-static method, runs during callback. Grabs info while still valid
-void ButtonThread::storeClickCount()
-{
-#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
-    multipressClickCount = userButton.getNumberClicks();
-#endif
-}
-
-void ButtonThread::userButtonPressedLongStart()
-{
-    if (millis() > c_holdOffTime) {
-        btnEvent = BUTTON_EVENT_LONG_PRESSED;
-    }
-}
-
-void ButtonThread::userButtonPressedLongStop()
-{
-    if (millis() > c_holdOffTime) {
-        btnEvent = BUTTON_EVENT_LONG_RELEASED;
-    }
-}

src/ButtonThread.h

@@ -1,82 +0,0 @@
-#pragma once
-
-#include "OneButton.h"
-#include "concurrency/OSThread.h"
-#include "configuration.h"
-
-#ifndef BUTTON_CLICK_MS
-#define BUTTON_CLICK_MS 250
-#endif
-
-#ifndef BUTTON_LONGPRESS_MS
-#define BUTTON_LONGPRESS_MS 5000
-#endif
-
-#ifndef BUTTON_TOUCH_MS
-#define BUTTON_TOUCH_MS 400
-#endif
-
-class ButtonThread : public concurrency::OSThread
-{
-  public:
-    static const uint32_t c_holdOffTime = 30000; // hold off 30s after boot
-
-    enum ButtonEventType {
-        BUTTON_EVENT_NONE,
-        BUTTON_EVENT_PRESSED,
-        BUTTON_EVENT_DOUBLE_PRESSED,
-        BUTTON_EVENT_MULTI_PRESSED,
-        BUTTON_EVENT_LONG_PRESSED,
-        BUTTON_EVENT_LONG_RELEASED,
-        BUTTON_EVENT_TOUCH_LONG_PRESSED,
-    };
-
-    ButtonThread();
-    int32_t runOnce() override;
-    void attachButtonInterrupts();
-    void detachButtonInterrupts();
-    void storeClickCount();
-
-    // Disconnect and reconnect interrupts for light sleep
-#ifdef ARCH_ESP32
-    int beforeLightSleep(void *unused);
-    int afterLightSleep(esp_sleep_wakeup_cause_t cause);
-#endif
-
-  private:
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
-    static OneButton userButton; // Static - accessed from an interrupt
-#endif
-#ifdef BUTTON_PIN_ALT
-    OneButton userButtonAlt;
-#endif
-#ifdef BUTTON_PIN_TOUCH
-    OneButton userButtonTouch;
-#endif
-
-#ifdef ARCH_ESP32
-    // Get notified when lightsleep begins and ends
-    CallbackObserver<ButtonThread, void *> lsObserver =
-        CallbackObserver<ButtonThread, void *>(this, &ButtonThread::beforeLightSleep);
-    CallbackObserver<ButtonThread, esp_sleep_wakeup_cause_t> lsEndObserver =
-        CallbackObserver<ButtonThread, esp_sleep_wakeup_cause_t>(this, &ButtonThread::afterLightSleep);
-#endif
-
-    // set during IRQ
-    static volatile ButtonEventType btnEvent;
-
-    // Store click count during callback, for later use
-    volatile int multipressClickCount = 0;
-
-    static void wakeOnIrq(int irq, int mode);
-
-    // IRQ callbacks
-    static void userButtonPressed() { btnEvent = BUTTON_EVENT_PRESSED; }
-    static void userButtonDoublePressed() { btnEvent = BUTTON_EVENT_DOUBLE_PRESSED; }
-    static void userButtonMultiPressed(void *callerThread); // Retrieve click count from non-static Onebutton while still valid
-    static void userButtonPressedLongStart();
-    static void userButtonPressedLongStop();
-    static void touchPressedLongStart() { btnEvent = BUTTON_EVENT_TOUCH_LONG_PRESSED; }
-};
-
-extern ButtonThread *buttonThread;

src/DisplayFormatters.cpp

@@ -27,9 +27,6 @@ const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaC
     case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
         return useShortName ? "LongM" : "LongMod";
         break;
-    case meshtastic_Config_LoRaConfig_ModemPreset_VERY_LONG_SLOW:
-        return useShortName ? "VeryL" : "VLongSlow";
-        break;
     default:
         return useShortName ? "Custom" : "Invalid";
         break;

src/FSCommon.cpp

@@ -12,13 +12,14 @@
 #include "SPILock.h"
 #include "configuration.h"
 
-#ifdef HAS_SDCARD
+// Software SPI is used by MUI so disable SD card here until it's also implemented
+#if defined(HAS_SDCARD) && !defined(SDCARD_USE_SOFT_SPI)
 #include <SD.h>
 #include <SPI.h>
 
 #ifdef SDCARD_USE_SPI1
-SPIClass SPI1(HSPI);
-#define SDHandler SPI1
+SPIClass SPI_HSPI(HSPI);
+#define SDHandler SPI_HSPI
 #else
 #define SDHandler SPI
 #endif
@@ -29,30 +30,6 @@ SPIClass SPI1(HSPI);
 
 #endif // HAS_SDCARD
 
-#if defined(ARCH_STM32WL)
-
-uint16_t OSFS::startOfEEPROM = 1;
-uint16_t OSFS::endOfEEPROM = 2048;
-
-// 3) How do I read from the medium?
-void OSFS::readNBytes(uint16_t address, unsigned int num, byte *output)
-{
-    for (uint16_t i = address; i < address + num; i++) {
-        *output = EEPROM.read(i);
-        output++;
-    }
-}
-
-// 4) How to I write to the medium?
-void OSFS::writeNBytes(uint16_t address, unsigned int num, const byte *input)
-{
-    for (uint16_t i = address; i < address + num; i++) {
-        EEPROM.update(i, *input);
-        input++;
-    }
-}
-#endif
-
 /**
  * @brief Copies a file from one location to another.
  *
@@ -62,33 +39,7 @@ void OSFS::writeNBytes(uint16_t address, unsigned int num, const byte *input)
  */
 bool copyFile(const char *from, const char *to)
 {
-#ifdef ARCH_STM32WL
-    unsigned char cbuffer[2048];
-
-    // Var to hold the result of actions
-    OSFS::result r;
-
-    r = OSFS::getFile(from, cbuffer);
-
-    if (r == notfound) {
-        LOG_ERROR("Failed to open source file %s", from);
-        return false;
-    } else if (r == noerr) {
-        r = OSFS::newFile(to, cbuffer, true);
-        if (r == noerr) {
-            return true;
-        } else {
-            LOG_ERROR("OSFS Error %d", r);
-            return false;
-        }
-
-    } else {
-        LOG_ERROR("OSFS Error %d", r);
-        return false;
-    }
-    return true;
-
-#elif defined(FSCom)
+#ifdef FSCom
     // take SPI Lock
     concurrency::LockGuard g(spiLock);
     unsigned char cbuffer[16];
@@ -127,13 +78,7 @@ bool copyFile(const char *from, const char *to)
  */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
-#ifdef ARCH_STM32WL
-    if (copyFile(pathFrom, pathTo) && (OSFS::deleteFile(pathFrom) == OSFS::result::NO_ERROR)) {
-        return true;
-    } else {
-        return false;
-    }
-#elif defined(FSCom)
+#ifdef FSCom
 
 #ifdef ARCH_ESP32
     // take SPI Lock
@@ -362,7 +307,7 @@ void fsInit()
  */
 void setupSDCard()
 {
-#ifdef HAS_SDCARD
+#if defined(HAS_SDCARD) && !defined(SDCARD_USE_SOFT_SPI)
     concurrency::LockGuard g(spiLock);
     SDHandler.begin(SPI_SCK, SPI_MISO, SPI_MOSI);
     if (!SD.begin(SDCARD_CS, SDHandler, SD_SPI_FREQUENCY)) {

src/FSCommon.h

@@ -15,13 +15,11 @@
 #endif
 
 #if defined(ARCH_STM32WL)
-// STM32WL series 2 Kbytes (8 rows of 256 bytes)
-#include <EEPROM.h>
-#include <OSFS.h>
-
-// Useful consts
-const OSFS::result noerr = OSFS::result::NO_ERROR;
-const OSFS::result notfound = OSFS::result::FILE_NOT_FOUND;
+// STM32WL
+#include "LittleFS.h"
+#define FSCom InternalFS
+#define FSBegin() FSCom.begin()
+using namespace STM32_LittleFS_Namespace;
 #endif
 
 #if defined(ARCH_RP2040)

src/Power.cpp

@@ -76,23 +76,47 @@ static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE;
 #endif
 #endif
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if __has_include(<Adafruit_INA219.h>)
 INA219Sensor ina219Sensor;
-INA226Sensor ina226Sensor;
-INA260Sensor ina260Sensor;
-INA3221Sensor ina3221Sensor;
+#else
+NullSensor ina219Sensor;
 #endif
 
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#if __has_include(<INA226.h>)
+INA226Sensor ina226Sensor;
+#else
+NullSensor ina226Sensor;
+#endif
+
+#if __has_include(<Adafruit_INA260.h>)
+INA260Sensor ina260Sensor;
+#else
+NullSensor ina260Sensor;
+#endif
+
+#if __has_include(<INA3221.h>)
+INA3221Sensor ina3221Sensor;
+#else
+NullSensor ina3221Sensor;
+#endif
+
+#endif
+
+#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_STM32WL)
 #include "modules/Telemetry/Sensor/MAX17048Sensor.h"
 #include <utility>
 extern std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1];
 #if HAS_TELEMETRY && (!MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR || !MESHTASTIC_EXCLUDE_POWER_TELEMETRY)
+#if __has_include(<Adafruit_MAX1704X.h>)
 MAX17048Sensor max17048Sensor;
+#else
+NullSensor max17048Sensor;
+#endif
 #endif
 #endif
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && HAS_RAKPROT && !defined(ARCH_PORTDUINO)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && HAS_RAKPROT
 RAK9154Sensor rak9154Sensor;
 #endif
 
@@ -203,7 +227,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
      */
     virtual int getBatteryPercent() override
     {
-#if defined(HAS_RAKPROT) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+#if defined(HAS_RAKPROT) && !defined(HAS_PMU)
         if (hasRAK()) {
             return rak9154Sensor.getBusBatteryPercent();
         }
@@ -248,15 +272,13 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
-#if HAS_TELEMETRY && defined(HAS_RAKPROT) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU) &&                                    \
-    !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if HAS_TELEMETRY && defined(HAS_RAKPROT) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasRAK()) {
             return getRAKVoltage();
         }
 #endif
 
-#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
-    !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if HAS_TELEMETRY && !defined(ARCH_STM32WL) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
             return getINAVoltage();
         }
@@ -380,6 +402,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
     // if we have a integrated device with a battery, we can assume that the battery is always connected
 #ifdef BATTERY_IMMUTABLE
     virtual bool isBatteryConnect() override { return true; }
+#elif defined(ADC_V)
+    virtual bool isBatteryConnect() override
+    {
+        int lastReading = digitalRead(ADC_V);
+        // 判断值是否变化
+        for (int i = 2; i < 500; i++) {
+            int reading = digitalRead(ADC_V);
+            if (reading != lastReading) {
+                return false; // 有变化，USB供电, 没接电池
+            }
+        }
+
+        return true;
+    }
 #else
     virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
 #endif
@@ -391,7 +427,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual bool isVbusIn() override
     {
 #ifdef EXT_PWR_DETECT
-#ifdef HELTEC_CAPSULE_SENSOR_V3
+#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
         // if external powered that pin will be pulled down
         if (digitalRead(EXT_PWR_DETECT) == LOW) {
             return true;
@@ -412,8 +448,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /// we can't be smart enough to say 'full'?
     virtual bool isCharging() override
     {
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(HAS_RAKPROT) && !defined(ARCH_PORTDUINO) &&             \
-    !defined(HAS_PMU)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(HAS_RAKPROT) && !defined(HAS_PMU)
         if (hasRAK()) {
             return (rak9154Sensor.isCharging()) ? OptTrue : OptFalse;
         }
@@ -421,7 +456,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
 #else
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) &&           \
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_STM32WL) &&                                       \
     !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
             // get current flow from INA sensor - negative value means power flowing into the battery
@@ -436,6 +471,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         return isBatteryConnect() && isVbusIn();
 #endif
 #endif
+        // by default, we check the battery voltage only
+        return isVbusIn();
     }
 
   private:
@@ -466,7 +503,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     }
 #endif
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_STM32WL)
     uint16_t getINAVoltage()
     {
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
@@ -541,7 +578,7 @@ Power::Power() : OSThread("Power")
 bool Power::analogInit()
 {
 #ifdef EXT_PWR_DETECT
-#ifdef HELTEC_CAPSULE_SENSOR_V3
+#if defined(HELTEC_CAPSULE_SENSOR_V3) || defined(HELTEC_SENSOR_HUB)
     pinMode(EXT_PWR_DETECT, INPUT_PULLUP);
 #else
     pinMode(EXT_PWR_DETECT, INPUT);
@@ -624,12 +661,14 @@ bool Power::analogInit()
  */
 bool Power::setup()
 {
-    // initialise one power sensor (only)
-    bool found = axpChipInit();
-    if (!found)
-        found = lipoInit();
-    if (!found)
-        found = analogInit();
+    bool found = false;
+    if (axpChipInit()) {
+        found = true;
+    } else if (lipoInit()) {
+        found = true;
+    } else if (analogInit()) {
+        found = true;
+    }
 
 #ifdef NRF_APM
     found = true;
@@ -668,12 +707,12 @@ void Power::readPowerStatus()
     int8_t batteryChargePercent = -1;
     OptionalBool usbPowered = OptUnknown;
     OptionalBool hasBattery = OptUnknown; // These must be static because NRF_APM code doesn't run every time
-    OptionalBool isCharging = OptUnknown;
+    OptionalBool isChargingNow = OptUnknown;
 
     if (batteryLevel) {
         hasBattery = batteryLevel->isBatteryConnect() ? OptTrue : OptFalse;
         usbPowered = batteryLevel->isVbusIn() ? OptTrue : OptFalse;
-        isCharging = batteryLevel->isCharging() ? OptTrue : OptFalse;
+        isChargingNow = batteryLevel->isCharging() ? OptTrue : OptFalse;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
             // If the AXP192 returns a valid battery percentage, use it
@@ -702,15 +741,15 @@ void Power::readPowerStatus()
 
     // If changed to DISCONNECTED
     if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED)
-        isCharging = usbPowered = OptFalse;
+        isChargingNow = usbPowered = OptFalse;
     // If changed to CONNECTED / READY
     else
-        isCharging = usbPowered = OptTrue;
+        isChargingNow = usbPowered = OptTrue;
 
 #endif
 
     // Notify any status instances that are observing us
-    const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isCharging, batteryVoltageMv, batteryChargePercent);
+    const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
     LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
               powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
     newStatus.notifyObservers(&powerStatus2);
@@ -756,6 +795,7 @@ void Power::readPowerStatus()
     // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
     // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
     //
+
     if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
         if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
             low_voltage_counter++;
@@ -815,7 +855,8 @@ int32_t Power::runOnce()
 #ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
             LOG_DEBUG("PEK long button press");
-            screen->setOn(false);
+            if (screen)
+                screen->setOn(false);
         }
 #endif
 

src/PowerFSM.cpp

@@ -19,14 +19,14 @@
 #include "sleep.h"
 #include "target_specific.h"
 
-#if HAS_WIFI && !defined(ARCH_PORTDUINO)
+#if HAS_WIFI && !defined(ARCH_PORTDUINO) || defined(MESHTASTIC_EXCLUDE_WIFI)
 #include "mesh/wifi/WiFiAPClient.h"
 #endif
 
 #ifndef SLEEP_TIME
 #define SLEEP_TIME 30
 #endif
-#if EXCLUDE_POWER_FSM
+#if MESHTASTIC_EXCLUDE_POWER_FSM
 FakeFsm powerFSM;
 void PowerFSM_setup(){};
 #else
@@ -82,7 +82,8 @@ static uint32_t secsSlept;
 static void lsEnter()
 {
     LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
-    screen->setOn(false);
+    if (screen)
+        screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
     // LOG_INFO("lsEnter end");
@@ -160,7 +161,8 @@ static void lsExit()
 static void nbEnter()
 {
     LOG_DEBUG("State: NB");
-    screen->setOn(false);
+    if (screen)
+        screen->setOn(false);
 #ifdef ARCH_ESP32
     // Only ESP32 should turn off bluetooth
     setBluetoothEnable(false);
@@ -172,22 +174,23 @@ static void nbEnter()
 static void darkEnter()
 {
     setBluetoothEnable(true);
-    screen->setOn(false);
+    if (screen)
+        screen->setOn(false);
 }
 
 static void serialEnter()
 {
     LOG_DEBUG("State: SERIAL");
     setBluetoothEnable(false);
-    screen->setOn(true);
-    screen->print("Serial connected\n");
+    if (screen) {
+        screen->setOn(true);
+    }
 }
 
 static void serialExit()
 {
     // Turn bluetooth back on when we leave serial stream API
     setBluetoothEnable(true);
-    screen->print("Serial disconnected\n");
 }
 
 static void powerEnter()
@@ -198,15 +201,10 @@ static void powerEnter()
         LOG_INFO("Loss of power in Powered");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     } else {
-        screen->setOn(true);
+        if (screen)
+            screen->setOn(true);
         setBluetoothEnable(true);
         // within enter() the function getState() returns the state we came from
-
-        // Mothballed: print change of power-state to device screen
-        /* if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
-            strcmp(powerFSM.getState()->name, "DARK") != 0) {
-            screen->print("Powered...\n");
-        }*/
     }
 }
 
@@ -221,18 +219,16 @@ static void powerIdle()
 
 static void powerExit()
 {
-    screen->setOn(true);
+    if (screen)
+        screen->setOn(true);
     setBluetoothEnable(true);
-
-    // Mothballed: print change of power-state to device screen
-    /*if (!isPowered())
-        screen->print("Unpowered...\n");*/
 }
 
 static void onEnter()
 {
     LOG_DEBUG("State: ON");
-    screen->setOn(true);
+    if (screen)
+        screen->setOn(true);
     setBluetoothEnable(true);
 }
 
@@ -244,11 +240,6 @@ static void onIdle()
     }
 }
 
-static void screenPress()
-{
-    screen->onPress();
-}
-
 static void bootEnter()
 {
     LOG_DEBUG("State: BOOT");
@@ -269,9 +260,6 @@ Fsm powerFSM(&stateBOOT);
 void PowerFSM_setup()
 {
     bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
-    bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
-                             config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
-                             config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
     LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);
@@ -295,9 +283,9 @@ void PowerFSM_setup()
     powerFSM.add_transition(&stateLS, &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&stateNB, &stateON, EVENT_PRESS, NULL, "Press");
     powerFSM.add_transition(&stateDARK, isPowered() ? &statePOWER : &stateON, EVENT_PRESS, NULL, "Press");
-    powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_PRESS, screenPress, "Press");
-    powerFSM.add_transition(&stateON, &stateON, EVENT_PRESS, screenPress, "Press"); // reenter On to restart our timers
-    powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, screenPress,
+    powerFSM.add_transition(&statePOWER, &statePOWER, EVENT_PRESS, NULL, "Press");
+    powerFSM.add_transition(&stateON, &stateON, EVENT_PRESS, NULL, "Press"); // reenter On to restart our timers
+    powerFSM.add_transition(&stateSERIAL, &stateSERIAL, EVENT_PRESS, NULL,
                             "Press"); // Allow button to work while in serial API
 
     // Handle critically low power battery by forcing deep sleep
@@ -331,10 +319,10 @@ void PowerFSM_setup()
         // if any packet destined for phone arrives, turn on bluetooth at least
         powerFSM.add_transition(&stateNB, &stateDARK, EVENT_PACKET_FOR_PHONE, NULL, "Packet for phone");
 
-        // show the latest node when we get a new node db update
-        powerFSM.add_transition(&stateNB, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
-        powerFSM.add_transition(&stateDARK, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
-        powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // Removed 2.7: we don't show the nodes individually for every node on the screen anymore
+        // powerFSM.add_transition(&stateNB, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateDARK, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
 
         // Show the received text message
         powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
@@ -383,6 +371,12 @@ void PowerFSM_setup()
     // See: https://github.com/meshtastic/firmware/issues/1071
     // Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated
     // through the modules
+
+#if HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
+    bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
+
     if ((isRouter || config.power.is_power_saving) && !isWifiAvailable() && !isTrackerOrSensor) {
         powerFSM.add_timed_transition(&stateNB, &stateLS,
                                       Default::getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
@@ -400,7 +394,9 @@ void PowerFSM_setup()
                                       Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
                                       NULL, "Screen-on timeout");
     }
-#else
+#endif // HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
+
+#else // (not) ARCH_ESP32
     // If not ESP32, light-sleep not used. Check periodically if config has drifted out of stateDark
     powerFSM.add_timed_transition(&stateDARK, &stateDARK,
                                   Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
@@ -409,4 +405,4 @@ void PowerFSM_setup()
 
     powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
 }
-#endif
+#endif

src/PowerFSM.h

@@ -11,7 +11,7 @@
 #define EVENT_RECEIVED_MSG 5
 // #define EVENT_BOOT 6 // now done with a timed transition
 #define EVENT_BLUETOOTH_PAIR 7
-#define EVENT_NODEDB_UPDATED 8     // NodeDB has a big enough change that we think you should turn on the screen
+// #define EVENT_NODEDB_UPDATED 8     // Now defunct: NodeDB has a big enough change that we think you should turn on the screen
 #define EVENT_CONTACT_FROM_PHONE 9 // the phone just talked to us over bluetooth
 #define EVENT_LOW_BATTERY 10       // Battery is critically low, go to sleep
 #define EVENT_SERIAL_CONNECTED 11
@@ -22,7 +22,7 @@
 #define EVENT_SHUTDOWN 16        // force a full shutdown now (not just sleep)
 #define EVENT_INPUT 17           // input broker wants something, we need to wake up and enable screen
 
-#if EXCLUDE_POWER_FSM
+#if MESHTASTIC_EXCLUDE_POWER_FSM
 class FakeFsm
 {
   public:

src/PowerFSMThread.h

@@ -18,7 +18,7 @@ class PowerFSMThread : public OSThread
   protected:
     int32_t runOnce() override
     {
-#if !EXCLUDE_POWER_FSM
+#if !MESHTASTIC_EXCLUDE_POWER_FSM
         powerFSM.run_machine();
 
         /// If we are in power state we force the CPU to wake every 10ms to check for serial characters (we don't yet wake