More progress

Make NodeDB sort its internal vector when lastheard is updated. Don't…

.devcontainer/Dockerfile

@@ -1,9 +1,10 @@
+# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
+# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
 
 USER root
 
-# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore(hadolint/DL3008): Use latest version of packages
 RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     && apt-get -y install --no-install-recommends \
     ca-certificates \
@@ -27,9 +28,15 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     hwdata \
     gpg \
     gnupg2 \
+    libusb-1.0-0-dev \
+    libuv1-dev \
+    libi2c-dev \
+    libxcb-xkb-dev \
+    libxkbcommon-dev \
+    libinput-dev \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
-RUN pipx install platformio==6.1.15
+RUN pipx install platformio
 
 COPY 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules
 

.devcontainer/setup.sh

@@ -1,3 +1,6 @@
 #!/usr/bin/env sh
 
 git submodule update --init
+
+pip install --no-cache-dir setuptools
+pipx install esptool

.gitattributes

@@ -1,4 +1,5 @@
 * text=auto eol=lf
-*.{cmd,[cC][mM][dD]} text eol=crlf
-*.{bat,[bB][aA][tT]} text eol=crlf
+*.cmd text eol=crlf
+*.bat text eol=crlf
+*.ps1 text eol=crlf
 *.{sh,[sS][hH]} text eol=lf

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+# These are supported funding model platforms
+
+open_collective: meshtastic

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -1,7 +1,7 @@
 name: Bug Report
 description: File a bug report
 title: "[Bug]: "
-labels: ["bug", "triage"]
+labels: [bug, triage]
 body:
   - type: markdown
     attributes:
@@ -72,6 +72,15 @@ body:
     validations:
       required: true
 
+  - type: checkboxes
+    id: mui
+    attributes:
+      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
+      options:
+        - label: Meshtastic UI aka MUI colorTFT
+        - label: InkHUD ePaper
+        - label: OLED slide UI on any display
+
   - type: input
     id: version
     attributes:

.github/ISSUE_TEMPLATE/New Board.yml

@@ -1,7 +1,7 @@
 name: New Board
 description: Request us to support new hardware
 title: "[Board]: "
-labels: ["enhancement", "triage"]
+labels: [enhancement, triage]
 body:
   - type: markdown
     attributes:

.github/ISSUE_TEMPLATE/feature.yml

@@ -1,7 +1,7 @@
 name: Feature Request
 description: Request a new feature
 title: "[Feature Request]: "
-labels: ["enhancement"]
+labels: [enhancement]
 body:
   - type: markdown
     attributes:

.github/actionlint.yaml

@@ -0,0 +1,5 @@
+# Configuration related to self-hosted runner.
+self-hosted-runner:
+  # Labels of self-hosted runner in array of strings.
+  labels:
+    - test-runner

.github/actions/build-variant/action.yml

@@ -34,7 +34,7 @@ inputs:
   arch:
     description: Processor arch name
     required: true
-    default: "esp32"
+    default: esp32
 
 runs:
   using: composite
@@ -43,6 +43,13 @@ runs:
       id: base
       uses: ./.github/actions/setup-base
 
+    - name: Get web ui version
+      if: inputs.include-web-ui == 'true'
+      id: webver
+      shell: bash
+      run: |
+        echo "ver=$(cat bin/web.version)" >> $GITHUB_OUTPUT
+
     - name: Pull web ui
       if: inputs.include-web-ui == 'true'
       uses: dsaltares/fetch-gh-release-asset@master
@@ -51,7 +58,7 @@ runs:
         file: build.tar
         target: build.tar
         token: ${{ inputs.github_token }}
-        version: tags/v2.5.3
+        version: tags/v${{ steps.webver.outputs.ver }}
 
     - name: Unpack web ui
       if: inputs.include-web-ui == 'true'

.github/actions/setup-base/action.yml

@@ -1,13 +1,13 @@
-name: "Setup Build Base Composite Action"
-description: "Base build actions for Meshtastic Platform IO steps"
+name: Setup Build Base Composite Action
+description: Base build actions for Meshtastic Platform IO steps
 
 runs:
-  using: "composite"
+  using: composite
   steps:
     - name: Checkout code
       uses: actions/checkout@v4
       with:
-        submodules: "recursive"
+        submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 

.github/actions/setup-native/action.yml

@@ -11,4 +11,4 @@ runs:
     - name: Install libs needed for native build
       shell: bash
       run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
+        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev libuv1-dev

.github/dependabot.yml

@@ -1,26 +0,0 @@
-version: 2
-updates:
-  - package-ecosystem: docker
-    directory: devcontainer
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: docker
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: gitsubmodule
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: github-actions
-    directory: /.github/workflows
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,6 +1,6 @@
-### ❌ (Please delete all these tips and replace them with your text) ❌
+## 🙏 Thank you for sending in a pull request, here's some tips to get started!
 
-## Thank you for sending in a pull request, here's some tips to get started!
+### ❌ (Please delete all these tips and replace them with your text) ❌
 
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
   to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
@@ -12,4 +12,17 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
+- Please do not submit untested code.
+- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
 - If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
+
+## 🤝 Attestations
+
+- [ ] I have tested that my proposed changes behave as described.
+- [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
+  - [ ] Heltec (Lora32) V3
+  - [ ] LilyGo T-Deck
+  - [ ] LilyGo T-Beam
+  - [ ] RAK WisBlock 4631
+  - [ ] Seeed Studio T-1000E tracker card
+  - [ ] Other (please specify below)

.github/workflows/build_debian_src.yml

@@ -4,7 +4,7 @@ on:
   workflow_call:
     secrets:
       PPA_GPG_PRIVATE_KEY:
-        required: true
+        required: false
     inputs:
       series:
         description: Ubuntu/Debian series to target

.github/workflows/build_nrf52.yml

@@ -7,6 +7,8 @@ on:
         required: true
         type: string
 
+permissions: read-all
+
 jobs:
   build-nrf52:
     runs-on: ubuntu-latest

.github/workflows/build_rpi2040.yml

@@ -7,6 +7,8 @@ on:
         required: true
         type: string
 
+permissions: read-all
+
 jobs:
   build-rpi2040:
     runs-on: ubuntu-latest

.github/workflows/build_stm32.yml

@@ -7,6 +7,8 @@ on:
         required: true
         type: string
 
+permissions: read-all
+
 jobs:
   build-stm32:
     runs-on: ubuntu-latest

.github/workflows/daily_packaging.yml

@@ -1,7 +1,7 @@
 name: Daily Packaging
 on:
   schedule:
-    - cron: 0 9 * * *
+    - cron: 0 2 * * *
   workflow_dispatch:
   push:
     branches:

.github/workflows/docker_build.yml

@@ -26,6 +26,11 @@ on:
         required: false
         type: boolean
         default: false
+      pio_env:
+        description: PlatformIO environment to build
+        required: false
+        type: string
+        default: native
     outputs:
       digest:
         description: Digest of built image
@@ -90,3 +95,5 @@ jobs:
           push: ${{ inputs.push }}
           tags: ${{ steps.meta.outputs.tags }} # Tag is only meant to be consumed by the "manifest" job
           platforms: ${{ inputs.platform }}
+          build-args: |
+            PIO_ENV=${{ inputs.pio_env }}

.github/workflows/generate-userprefs.yml

@@ -1,35 +0,0 @@
-name: Generate UsersPrefs JSON manifest
-
-on:
-  push:
-    paths:
-      - userPrefs.h
-    branches:
-      - master
-
-jobs:
-  generate-userprefs:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-
-      - name: Install Clang
-        run: sudo apt-get install -y clang
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Generate userPrefs.jsom
-        run: python3 ./bin/build-userprefs-json.py
-
-      - name: Trunk format json
-        run: trunk format userPrefs.json
-
-      - name: Commit userPrefs.json
-        run: |
-          git config --global user.email "actions@github.com"
-          git config --global user.name "GitHub Actions"
-          git add userPrefs.json
-          git commit -m "Update userPrefs.json"
-          git push

.github/workflows/main_matrix.yml

@@ -5,14 +5,20 @@ concurrency:
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
-    branches: [master, develop]
+    branches:
+      - master
+      - develop
+      - event/*
     paths-ignore:
       - "**.md"
       - version.properties
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
-    branches: [master, develop]
+    branches:
+      - master
+      - develop
+      - event/*
     paths-ignore:
       - "**.md"
       #- "**.yml"
@@ -32,12 +38,12 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "${{ github.head_ref }}" == "" ]]; then
+          if [[ "$GITHUB_HEAD_REF" == "" ]]; then
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
           else  
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
@@ -135,16 +141,18 @@ jobs:
       build_location: local
     secrets: inherit
 
-  package-pio-deps-native:
+  package-pio-deps-native-tft:
+    if: ${{ github.event_name == 'workflow_dispatch' }}
     uses: ./.github/workflows/package_pio_deps.yml
     with:
-      pio_env: native
+      pio_env: native-tft
     secrets: inherit
 
   test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker-debian-amd64:
+  docker-deb-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -152,7 +160,16 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-alpine-amd64:
+  docker-deb-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: alpine
@@ -160,7 +177,16 @@ jobs:
       runs-on: ubuntu-24.04
       push: false
 
-  docker-debian-arm64:
+  docker-alp-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -168,7 +194,7 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  docker-debian-armv7:
+  docker-deb-armv7:
     uses: ./.github/workflows/docker_build.yml
     with:
       distro: debian
@@ -176,17 +202,6 @@ jobs:
       runs-on: ubuntu-24.04-arm
       push: false
 
-  after-checks:
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
-    needs: [check]
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
   gather-artifacts:
     permissions:
       contents: write
@@ -288,7 +303,7 @@ jobs:
     needs:
       - gather-artifacts
       - build-debian-src
-      - package-pio-deps-native
+      - package-pio-deps-native-tft
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -324,46 +339,32 @@ jobs:
           merge-multiple: true
           path: ./output/debian-src
 
-      - name: Download native pio deps
+      - name: Download `native-tft` pio deps
         uses: actions/download-artifact@v4
         with:
-          pattern: platformio-deps-native-${{ steps.version.outputs.long }}
+          pattern: platformio-deps-native-tft-${{ steps.version.outputs.long }}
           merge-multiple: true
-          path: ./output/pio-deps-native
+          path: ./output/pio-deps-native-tft
 
-      - name: Zip linux sources
+      - name: Zip Linux sources
         working-directory: output
         run: |
           zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
-          zip -9 -r ./platformio-deps-native-${{ steps.version.outputs.long }}.zip ./pio-deps-native
+          zip -9 -r ./platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip ./pio-deps-native-tft
 
       # For diagnostics
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add linux sources to release
+      - name: Add Linux sources to GtiHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
-          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./output/platformio-deps-native-tft-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
-      - name: Bump version.properties
-        run: >-
-          bin/bump_version.py
-
-      - name: Update debian changelog
-        run: >-
-          debian/ci_changelog.sh
-
-      - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v7
-        with:
-          title: Bump version.properties
-          add-paths: |
-            version.properties
-            debian/changelog
-
   release-firmware:
     strategy:
       fail-fast: false
@@ -415,9 +416,53 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add bins and debug elfs to release
+      - name: Add bins and debug elfs to GitHub Release
+        # Only run when targeting master branch with workflow_dispatch
+        if: ${{ github.ref_name == 'master' }}
         run: |
           gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  publish-firmware:
+    runs-on: ubuntu-latest
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    needs: [release-firmware]
+    env:
+      targets: esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,stm32
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Setup Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: 3.x
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: firmware-{${{ env.targets }}}-${{ steps.version.outputs.long }}
+          merge-multiple: true
+          path: ./publish
+
+      - name: Publish firmware to meshtastic.github.io
+        uses: peaceiris/actions-gh-pages@v4
+        env:
+          # On event/* branches, use the event name as the destination prefix
+          DEST_PREFIX: ${{ contains(github.ref_name, 'event/') && format('{0}/', github.ref_name) || '' }}
+        with:
+          deploy_key: ${{ secrets.DIST_PAGES_DEPLOY_KEY }}
+          external_repository: meshtastic/meshtastic.github.io
+          publish_branch: master
+          publish_dir: ./publish
+          destination_dir: ${{ env.DEST_PREFIX }}firmware-${{ steps.version.outputs.long }}
+          keep_files: true
+          user_name: github-actions[bot]
+          user_email: github-actions[bot]@users.noreply.github.com
+          commit_message: ${{ steps.version.outputs.long }}
+          enable_jekyll: true

.github/workflows/nightly.yml

@@ -4,16 +4,34 @@ on:
     - cron: 0 8 * * 1-5
   workflow_dispatch: {}
 
+permissions: read-all
+
 jobs:
   trunk_check:
-    name: Trunk Check Upload
-    runs-on: ubuntu-latest
+    name: Trunk Check and Upload
+    runs-on: ubuntu-24.04
 
     steps:
       - name: Checkout
         uses: actions/checkout@v4
 
       - name: Trunk Check
-        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
+        uses: trunk-io/trunk-action@v1
         with:
           trunk-token: ${{ secrets.TRUNK_TOKEN }}
+
+  trunk_upgrade:
+    # See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#automatic-upgrades
+    name: Trunk Upgrade (PR)
+    runs-on: ubuntu-24.04
+    permissions:
+      contents: write # For trunk to create PRs
+      pull-requests: write # For trunk to create PRs
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Trunk Upgrade
+        uses: trunk-io/trunk-action/upgrade@v1
+        with:
+          base: master

.github/workflows/release_channels.yml

@@ -43,3 +43,65 @@ jobs:
       copr_project: |-
         ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
     secrets: inherit
+
+  # Create a PR to bump version when a release is Published
+  bump-version:
+    if: github.event.action == 'published'
+    runs-on: ubuntu-latest
+    permissions:
+      pull-requests: write
+      contents: write
+    defaults:
+      run:
+        shell: bash
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Setup Python
+        uses: actions/setup-python@v5
+        with:
+          python-version: 3.x
+
+      - name: Bump version.properties
+        run: |
+          # Bump version.properties
+          chmod +x ./bin/bump_version.py
+          ./bin/bump_version.py
+
+      - name: Get new release version string
+        run: |
+          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
+        id: new_version
+
+      - name: Ensure debian deps are installed
+        run: |
+          sudo apt-get update -y --fix-missing
+          sudo apt-get install -y devscripts
+
+      - name: Update debian changelog
+        run: |
+          # Update debian changelog
+          chmod +x ./debian/ci_changelog.sh
+          ./debian/ci_changelog.sh
+
+      - name: Bump org.meshtastic.meshtasticd.metainfo.xml
+        run: |
+          # Bump org.meshtastic.meshtasticd.metainfo.xml
+          pip install -r bin/bump_metainfo/requirements.txt -q
+          chmod +x ./bin/bump_metainfo/bump_metainfo.py
+          ./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.new_version.outputs.short }}"
+        env:
+          PIP_DISABLE_PIP_VERSION_CHECK: 1
+
+      - name: Create Bumps pull request
+        uses: peter-evans/create-pull-request@v7
+        with:
+          base: ${{ github.event.repository.default_branch }}
+          branch: create-pull-request/bump-version
+          title: Bump release version
+          commit-message: automated bumps
+          add-paths: |
+            version.properties
+            debian/changelog
+            bin/org.meshtastic.meshtasticd.metainfo.xml

.github/workflows/sec_sast_flawfinder.yml

@@ -1,41 +0,0 @@
----
-name: Flawfinder Scan
-
-on:
-  push:
-    branches: [master, develop]
-    paths-ignore:
-      - "**.md"
-      - "version.properties"
-
-jobs:
-  flawfinder:
-    runs-on: ubuntu-latest
-    name: Flawfinder
-
-    steps:
-      # step 1
-      - name: clone application source code
-        uses: actions/checkout@v4
-
-      # step 2
-      - name: flawfinder_scan
-        uses: david-a-wheeler/flawfinder@2.0.19
-        with:
-          arguments: "--sarif ./"
-          output: "flawfinder_report.sarif"
-
-      # step 3
-      - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: flawfinder_report.sarif
-          overwrite: true
-          path: flawfinder_report.sarif
-
-      # step 4
-      - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v3
-        with:
-          sarif_file: flawfinder_report.sarif
-          category: flawfinder

.github/workflows/sec_sast_semgrep_cron.yml

@@ -3,14 +3,17 @@ name: Semgrep Full Scan
 
 on:
   workflow_dispatch:
-    branches:
-      - master
   schedule:
-    - cron: "0 1 * * 6"
+    - cron: 0 1 * * 6
+
+permissions:
+  actions: read
+  contents: read
+  security-events: write
 
 jobs:
   semgrep-full:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
 

.github/workflows/sec_sast_semgrep_pull.yml

@@ -2,9 +2,11 @@
 name: Semgrep Differential Scan
 on: pull_request
 
+permissions: read-all
+
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     container:
       image: semgrep/semgrep
 

.github/workflows/stale_bot.yml

@@ -16,7 +16,8 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v9.0.0
+        uses: actions/stale@v9.1.0
         with:
+          days-before-stale: 45
           exempt-issue-labels: pinned,3.0
           exempt-pr-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v1.9.1
+        uses: dorny/test-reporter@v2.1.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -2,9 +2,14 @@ name: End to end tests
 
 on:
   schedule:
-    - cron: "0 0 * * *" # Run every day at midnight
+    - cron: 0 0 * * * # Run every day at midnight
   workflow_dispatch: {}
 
+permissions:
+  contents: read
+  actions: read
+  checks: write
+
 jobs:
   native-tests:
     uses: ./.github/workflows/test_native.yml
@@ -42,7 +47,7 @@ jobs:
       - name: Setup Node
         uses: actions/setup-node@v4
         with:
-          node-version: 18
+          node-version: 22
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/trunk_annotate_pr.yml

@@ -0,0 +1,26 @@
+name: Annotate PR with trunk issues
+# See: https://github.com/trunk-io/trunk-action/blob/v1/readme.md#getting-inline-annotations-for-fork-prs
+
+on:
+  workflow_run:
+    workflows: [Pull Request] # Name from `trunk_check.yml`
+    types: [completed]
+
+permissions: read-all
+
+jobs:
+  trunk_check:
+    name: Trunk Code Quality Annotate
+    runs-on: ubuntu-24.04
+    permissions:
+      checks: write # For trunk to post annotations
+      contents: read # For repo checkout
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Trunk Check
+        uses: trunk-io/trunk-action@v1
+        with:
+          post-annotations: true

.github/workflows/trunk_check.yml

@@ -9,7 +9,7 @@ permissions: read-all
 jobs:
   trunk_check:
     name: Trunk Check Runner
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04
     permissions:
       checks: write # For trunk to post annotations
       contents: read # For repo checkout
@@ -20,3 +20,5 @@ jobs:
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
+        with:
+          save-annotations: true

.github/workflows/trunk_format_pr.yml

@@ -4,11 +4,15 @@ on:
   issue_comment:
     types: [created]
 
+permissions: read-all
+
 jobs:
   trunk-fmt:
     if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
     runs-on: ubuntu-latest
-
+    permissions:
+      contents: write
+      pull-requests: write
     steps:
       - name: Checkout repository
         uses: actions/checkout@v4

.github/workflows/update_protobufs.yml

@@ -1,10 +1,14 @@
 name: Update protobufs and regenerate classes
 on: workflow_dispatch
 
+permissions: read-all
+
 jobs:
   update-protobufs:
     runs-on: ubuntu-latest
-
+    permissions:
+      contents: write
+      pull-requests: write
     steps:
       - name: Checkout code
         uses: actions/checkout@v4
@@ -29,6 +33,7 @@ jobs:
       - name: Create pull request
         uses: peter-evans/create-pull-request@v7
         with:
+          branch: create-pull-request/update-protobufs
           title: Update protobufs and classes
           add-paths: |
             protobufs

.trunk/configs/.markdownlint.yaml

@@ -8,3 +8,4 @@ line_length: false
 spaces: false
 url: false
 whitespace: false
+headings: false

.trunk/configs/.prettierignore

@@ -0,0 +1 @@
+renovate.json

.trunk/trunk.yaml

@@ -1,37 +1,35 @@
 version: 0.1
 cli:
-  version: 1.22.8
+  version: 1.24.0
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.6
+      ref: v1.7.0
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - prettier@3.4.2
-    - trufflehog@3.86.1
-    - yamllint@1.35.1
-    - bandit@1.8.0
-    - checkov@3.2.334
-    - terrascan@1.19.9
-    - trivy@0.58.0
-    #- trufflehog@3.63.2-rc0
+    - checkov@3.2.442
+    - renovate@40.60.3
+    - prettier@3.5.3
+    - trufflehog@3.89.2
+    - yamllint@1.37.1
+    - bandit@1.8.5
+    - trivy@0.63.0
     - taplo@0.9.3
-    - ruff@0.8.3
-    - isort@5.13.2
-    - markdownlint@0.43.0
-    - oxipng@9.1.3
+    - ruff@0.12.0
+    - isort@6.0.1
+    - markdownlint@0.45.0
+    - oxipng@9.1.5
     - svgo@3.3.2
-    - actionlint@1.7.4
-    - flake8@7.1.1
+    - actionlint@1.7.7
+    - flake8@7.2.0
     - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.10.0
+    - black@25.1.0
     - git-diff-check
-    - gitleaks@8.21.2
+    - gitleaks@8.27.2
     - clang-format@16.0.3
-    #- prettier@3.3.3
   ignore:
     - linters: [ALL]
       paths:
@@ -40,7 +38,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@18.20.5
+    - node@22.16.0
 actions:
   disabled:
     - trunk-announce

.vscode/settings.json

@@ -7,5 +7,8 @@
   "cmake.configureOnOpen": false,
   "[cpp]": {
     "editor.defaultFormatter": "trunk.io"
+  },
+  "[powershell]": {
+    "editor.defaultFormatter": "ms-vscode.powershell"
   }
 }

Dockerfile

@@ -1,48 +1,67 @@
-# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore-all(hadolint/DL3008): Use latest version of apt packages for buildchain
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
+# trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
+# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.12-bookworm AS builder
+FROM python:3.13-bookworm AS builder
+ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
 # Install Dependencies
 ENV PIP_ROOT_USER_ACTION=ignore
-RUN apt-get update && apt-get install --no-install-recommends -y wget g++ zip git ca-certificates \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config && \
-    apt-get clean && rm -rf /var/lib/apt/lists/* && \
-    pip install --no-cache-dir -U platformio==6.1.16 && \
-    mkdir /tmp/firmware
+RUN apt-get update && apt-get install --no-install-recommends -y \
+        curl wget g++ zip git ca-certificates pkg-config \
+        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev libuv1-dev \
+        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev \
+        libx11-dev libinput-dev libxkbcommon-x11-dev \
+    && apt-get clean && rm -rf /var/lib/apt/lists/* \
+    && pip install --no-cache-dir -U platformio \
+    && mkdir /tmp/firmware
 
 # Copy source code
 WORKDIR /tmp/firmware
 COPY . /tmp/firmware
 
 # Build
-RUN bash ./bin/build-native.sh && \
+RUN bash ./bin/build-native.sh "$PIO_ENV" && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
+# Fetch web assets
+RUN curl -L "https://github.com/meshtastic/web/releases/download/v$(cat /tmp/firmware/bin/web.version)/build.tar" -o /tmp/web.tar \
+    && mkdir -p /tmp/web \
+    && tar -xf /tmp/web.tar -C /tmp/web/ \
+    && gzip -dr /tmp/web \
+    && rm /tmp/web.tar
 
 ##### PRODUCTION BUILD #############
 
 FROM debian:bookworm-slim
+LABEL org.opencontainers.image.title="Meshtastic" \
+      org.opencontainers.image.description="Debian Meshtastic daemon and web interface" \
+      org.opencontainers.image.url="https://meshtastic.org" \
+      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
+      org.opencontainers.image.authors="Meshtastic" \
+      org.opencontainers.image.licenses="GPL-3.0-or-later" \
+      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
 # nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
 USER root
 
-RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 && \
-    apt-get clean && rm -rf /var/lib/apt/lists/* \
+RUN apt-get update && apt-get --no-install-recommends -y install \
+        libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libuv1 libusb-1.0-0-dev \
+        liborcania2.3 libulfius2.7 libssl3 \
+        libx11-6 libinput10 libxkbcommon-x11-0 \
+    && apt-get clean && rm -rf /var/lib/apt/lists/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
 
 # Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
+COPY --from=builder /tmp/web /usr/share/meshtasticd/
 # Copy config templates
 COPY ./bin/config.d /etc/meshtasticd/available.d
 
@@ -51,7 +70,9 @@ VOLUME /var/lib/meshtasticd
 
 # Expose Meshtastic TCP API port from the host
 EXPOSE 4403
+# Expose Meshtastic Web UI port from the host
+EXPOSE 9443
 
-CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
+CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
 
-HEALTHCHECK NONE
+HEALTHCHECK NONE

README.md

@@ -1,4 +1,7 @@
-# Meshtastic Firmware
+<div align="center" markdown="1">
+
+<img src=".github/meshtastic_logo.png" alt="Meshtastic Logo" width="80"/>
+<h1>Meshtastic Firmware</h1>
 
 ![GitHub release downloads](https://img.shields.io/github/downloads/meshtastic/firmware/total)
 [![CI](https://img.shields.io/github/actions/workflow/status/meshtastic/firmware/main_matrix.yml?branch=master&label=actions&logo=github&color=yellow)](https://github.com/meshtastic/firmware/actions/workflows/ci.yml)
@@ -6,13 +9,32 @@
 [![Fiscal Contributors](https://opencollective.com/meshtastic/tiers/badge.svg?label=Fiscal%20Contributors&color=deeppink)](https://opencollective.com/meshtastic/)
 [![Vercel](https://img.shields.io/static/v1?label=Powered%20by&message=Vercel&style=flat&logo=vercel&color=000000)](https://vercel.com?utm_source=meshtastic&utm_campaign=oss)
 
+<a href="https://trendshift.io/repositories/5524" target="_blank"><img src="https://trendshift.io/api/badge/repositories/5524" alt="meshtastic%2Ffirmware | Trendshift" style="width: 250px; height: 55px;" width="250" height="55"/></a>
+
+</div>
+
+</div>
+
+<div align="center">
+	<a href="https://meshtastic.org">Website</a>
+	-
+	<a href="https://meshtastic.org/docs/">Documentation</a>
+</div>
+
 ## Overview
 
-This repository contains the device firmware for the Meshtastic project.
+This repository contains the official device firmware for Meshtastic, an open-source LoRa mesh networking project designed for long-range, low-power communication without relying on internet or cellular infrastructure. The firmware supports various hardware platforms, including ESP32, nRF52, RP2040/RP2350, and Linux-based devices.
 
-- **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)**
-- **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)**
+Meshtastic enables text messaging, location sharing, and telemetry over a decentralized mesh network, making it ideal for outdoor adventures, emergency preparedness, and remote operations.
+
+### Get Started
+
+- 🔧 **[Building Instructions](https://meshtastic.org/docs/development/firmware/build)** – Learn how to compile the firmware from source.
+- ⚡ **[Flashing Instructions](https://meshtastic.org/docs/getting-started/flashing-firmware/)** – Install or update the firmware on your device.
+
+Join our community and help improve Meshtastic! 🚀
 
 ## Stats
 
-![Alt](https://repobeats.axiom.co/api/embed/a92f097d9197ae853e780ec53d7d126e545629ab.svg "Repobeats analytics image")
+![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
+| 2.6.x            | :white_check_mark: |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

alpine.Dockerfile

@@ -1,14 +1,19 @@
 # trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
 # trunk-ignore-all(hadolint/DL3002): We must run as root for this container
+# trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
+# trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.12-alpine3.21 AS builder
-
+FROM python:3.13-alpine3.22 AS builder
+ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
-RUN apk add bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone && \
-    pip install --no-cache-dir -U platformio==6.1.16 && \
-    mkdir /tmp/firmware
+
+RUN apk --no-cache add \
+        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
+        libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
+        libx11-dev libinput-dev libxkbcommon-dev \
+    && rm -rf /var/cache/apk/* \
+    && pip install --no-cache-dir -U platformio \
+    && mkdir /tmp/firmware
 
 WORKDIR /tmp/firmware
 COPY . /tmp/firmware
@@ -17,21 +22,35 @@ COPY . /tmp/firmware
 # Add `argp` for musl
 ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
 
-RUN bash ./bin/build-native.sh && \
+RUN bash ./bin/build-native.sh "$PIO_ENV" && \
     cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.21
+FROM alpine:3.22
+LABEL org.opencontainers.image.title="Meshtastic" \
+      org.opencontainers.image.description="Alpine Meshtastic daemon" \
+      org.opencontainers.image.url="https://meshtastic.org" \
+      org.opencontainers.image.documentation="https://meshtastic.org/docs/" \
+      org.opencontainers.image.authors="Meshtastic" \
+      org.opencontainers.image.licenses="GPL-3.0-or-later" \
+      org.opencontainers.image.source="https://github.com/meshtastic/firmware/"
 
 # nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
 USER root
 
-RUN apk add libstdc++ libgpiod yaml-cpp libusb i2c-tools \
+RUN apk --no-cache add \
+        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
+        libx11 libinput libxkbcommon \
+    && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \
     && mkdir -p /etc/meshtasticd/ssl
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+
+# Fetch compiled binary from the builder
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/bin/
+# Copy config templates
+COPY ./bin/config.d /etc/meshtasticd/available.d
 
 WORKDIR /var/lib/meshtasticd
 VOLUME /var/lib/meshtasticd

arch/esp32/esp32.ini

@@ -2,7 +2,9 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.9.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
+  platformio/espressif32@6.11.0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -37,19 +39,27 @@ build_flags =
   -DLIBPAX_ARDUINO
   -DLIBPAX_WIFI
   -DLIBPAX_BLE
+  -DHAS_UDP_MULTICAST=1
   ;-DDEBUG_HEAP
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
-  h2zero/NimBLE-Arduino@^1.4.2
-  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
-  lewisxhe/XPowersLib@^0.2.6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
+  https://github.com/meshtastic/esp32_https_server/archive/896f1771ceb5979987a0b41028bf1b4e7aad419b.zip
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@^1.4.3
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
+  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@^0.2.7
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 lib_ignore = 
   segger_rtt
@@ -65,4 +75,4 @@ lib_ignore =
 
 ; customize the partition table
 ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
-board_build.partitions = partition-table.csv
+board_build.partitions = partition-table.csv

arch/esp32/esp32c6.ini

@@ -1,6 +1,8 @@
 [esp32c6_base]
 extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
+platform =
+  # Do not renovate until we have switched to pioarduino tagged builds
+  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
 build_flags =
   ${arduino_base.build_flags}
   -Wall
@@ -23,10 +25,14 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  lewisxhe/XPowersLib@^0.2.6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@^0.2.7
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 build_src_filter = 
  ${esp32_base.build_src_filter} -<mesh/http> 
@@ -38,4 +44,4 @@ lib_ignore =
   NonBlockingRTTTL
   NimBLE-Arduino
   libpax
-  
+  

arch/esp32/esp32s2.ini

@@ -16,4 +16,4 @@ build_flags =
 lib_ignore = 
   ${esp32_base.lib_ignore} 
   NimBLE-Arduino
-  libpax
+  libpax

arch/esp32/esp32s3.ini

@@ -3,4 +3,3 @@ extends = esp32_base
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
-

arch/nrf52/nrf52.ini

@@ -1,11 +1,15 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.7.0
+platform =
+  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
+  platformio/nordicnrf52@^10.8.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
-  framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino.git#e13f5820002a4fb2a5e6754b42ace185277e5adf
-  toolchain-gccarmnoneeabi@~1.90301.0
+  # TODO renovate
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  ; Don't renovate toolchain-gccarmnoneeabi
+  platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
 build_flags =
@@ -17,7 +21,6 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -DMAX_NUM_NODES=80
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
@@ -25,8 +28,9 @@ build_src_filter =
 lib_deps=
   ${arduino_base.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto@^0.4.0
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
 
 lib_ignore =
   BluetoothOTA
-  lvgl
+  lvgl

arch/nrf52/nrf52840.ini

@@ -6,7 +6,9 @@ build_flags = ${nrf52_base.build_flags}
 lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
-  https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
+  ${environmental_extra.lib_deps}
+  # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -1,6 +1,8 @@
 ; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
+platform =
+  # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
+  https://github.com/meshtastic/platform-native/archive/681ee029207e9fd040afa223df6e54074cbbe084.zip
 framework = arduino
 
 build_src_filter = 
@@ -15,18 +17,19 @@ build_src_filter =
   +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
-  -<modules/Telemetry/EnvironmentTelemetry.cpp>
-  -<modules/Telemetry/AirQualityTelemetry.cpp>
-  -<modules/Telemetry/Sensor>
   +<../variants/portduino>
 
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto@^0.4.0
+  ${environmental_base.lib_deps}
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
   lovyan03/LovyanGFX@^1.2.0
-  https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
+  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
+  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
 
 build_flags =
   ${arduino_base.build_flags}
@@ -34,10 +37,15 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
+  -DHAS_UDP_MULTICAST
   -lpthread
   -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
   -li2c
+  -luv
+  -std=gnu17
   -std=c++17
+
+lib_ignore = Adafruit NeoPixel

arch/rp2xx0/rp2040.ini

@@ -1,8 +1,13 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -18,9 +23,12 @@ build_src_filter =
 
 lib_ignore =
   BluetoothOTA
+  lvgl
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0

arch/rp2xx0/rp2350.ini

@@ -1,8 +1,13 @@
-; Common settings for rp2040 Processor based targets
+; Common settings for rp2350 Processor based targets
 [rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -10,7 +15,6 @@ build_flags =
   ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
   -Isrc/platform/rp2xx0
   -D__PLAT_RP2350__
-#  -D _POSIX_THREADS
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>
 
@@ -21,5 +25,7 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
-  rweather/Crypto
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0

arch/stm32/stm32.ini

@@ -1,13 +1,18 @@
 [stm32_base]
 extends = arduino_base
-platform = ststm32
-platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#ea74156acd823b6d14739f389e6cdc648f8ee36e
+platform =
+  # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
+  platformio/ststm32@19.2.0
+platform_packages =
+  # TODO renovate
+  platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
+extra_scripts =
+  ${env.extra_scripts}
+  post:extra_scripts/extra_stm32.py
 
 build_type = release
 
-;board_build.flash_offset = 0x08000000
-
-build_flags = 
+build_flags =
   ${arduino_base.build_flags}
   -flto
   -Isrc/platform/stm32wl -g
@@ -18,27 +23,25 @@ build_flags =
   -DMESHTASTIC_EXCLUDE_SCREEN
   -DMESHTASTIC_EXCLUDE_MQTT
   -DMESHTASTIC_EXCLUDE_BLUETOOTH
-  -DMESHTASTIC_EXCLUDE_PKI
   -DMESHTASTIC_EXCLUDE_GPS
-;  -DVECT_TAB_OFFSET=0x08000000
-  -DconfigUSE_CMSIS_RTOS_V2=1
-;  -DSPI_MODE_0=SPI_MODE0
+  ;-DDEBUG_MUTE
   -fmerge-all-constants
   -ffunction-sections
   -fdata-sections
-  
-build_src_filter = 
+
+build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
+debug_tool = stlink
 
 lib_deps =
   ${env.lib_deps}
-  charlesbaynham/OSFS@^1.2.3
-  jgromes/RadioLib@7.0.2
-  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
+  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
   mathertel/OneButton@2.6.1
-  Wire
+  Wire

bin/99-meshtasticd-udev.rules

@@ -0,0 +1,7 @@
+# Set spidev ownership to 'spi' group
+SUBSYSTEM=="spidev", KERNEL=="spidev*", GROUP="spi", MODE="0660"
+# Allow access to USB CH341 devices
+SUBSYSTEM=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666"
+# Set gpio ownership to 'gpio' group
+SUBSYSTEM=="*gpiomem*", GROUP="gpio", MODE="0660"
+SUBSYSTEM=="gpio", GROUP="gpio", MODE="0660"

bin/build-esp32.sh

@@ -35,11 +35,11 @@ cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
 pio run --environment $1 -t buildfs
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$VERSION.bin
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$1-$VERSION.bin
 # Remove webserver files from the filesystem and rebuild
 ls -l data/static # Diagnostic list of files
 rm -rf data/static
 pio run --environment $1 -t buildfs
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$1-$VERSION.bin
 cp bin/device-install.* $OUTDIR
-cp bin/device-update.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -15,6 +15,7 @@ platformioFailed() {
 
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
+PIO_ENV=${1:-native}
 
 OUTDIR=release/
 
@@ -24,7 +25,7 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update --environment native || platformioFailed
-pio run --environment native || platformioFailed
-cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
+pio pkg update --environment "$PIO_ENV" || platformioFailed
+pio run --environment "$PIO_ENV" || platformioFailed
+cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/native-install.* $OUTDIR

bin/bump_metainfo/bump_metainfo.py

@@ -0,0 +1,72 @@
+#!/usr/bin/env python3
+import argparse
+import xml.etree.ElementTree as ET
+from defusedxml.ElementTree import parse
+from datetime import datetime, timezone
+
+
+# Indent by 2 spaces to align with xml formatting.
+def indent(elem, level=0):
+    i = "\n" + level * "  "
+    if len(elem):
+        if not elem.text or not elem.text.strip():
+            elem.text = i + "  "
+        for child in elem:
+            indent(child, level + 1)
+        if not child.tail or not child.tail.strip():
+            child.tail = i
+    if level and (not elem.tail or not elem.tail.strip()):
+        elem.tail = i
+
+
+def main():
+    parser = argparse.ArgumentParser(
+        description="Prepend new release entry to metainfo.xml file.")
+    parser.add_argument("--file", help="Path to the metainfo.xml file",
+                        default="org.meshtastic.meshtasticd.metainfo.xml")
+    parser.add_argument("version", help="Version string (e.g. 2.6.4)")
+    parser.add_argument("--date", help="Release date (YYYY-MM-DD), defaults to today",
+                        default=datetime.now(timezone.utc).date().isoformat())
+
+    args = parser.parse_args()
+
+    tree = parse(args.file)
+    root = tree.getroot()
+
+    releases = root.find('releases')
+    if releases is None:
+        raise RuntimeError("<releases> element not found in XML.")
+
+    existing_versions = {
+        release.get('version'): release
+        for release in releases.findall('release')
+    }
+    existing_release = existing_versions.get(args.version)
+
+    if existing_release is not None:
+        if not existing_release.get('date'):
+            print(f"Version {args.version} found without date. Adding date...")
+            existing_release.set('date', args.date)
+        else:
+            print(
+                f"Version {args.version} is already present with date, skipping insertion.")
+    else:
+        new_release = ET.Element('release', {
+            'version': args.version,
+            'date': args.date
+        })
+        url = ET.SubElement(new_release, 'url', {'type': 'details'})
+        url.text = f"https://github.com/meshtastic/firmware/releases?q=tag%3Av{args.version}"
+
+        releases.insert(0, new_release)
+
+        indent(releases, level=1)
+        releases.tail = "\n"
+
+        print(f"Inserted new release: {args.version}")
+
+    tree.write(args.file, encoding='UTF-8', xml_declaration=True)
+
+
+if __name__ == "__main__":
+    main()

bin/bump_metainfo/requirements.txt

@@ -0,0 +1 @@
+defusedxml==0.7.1

bin/check-all.sh

@@ -23,4 +23,4 @@ for BOARD in $BOARDS; do
 	CHECK="${CHECK} -e ${BOARD}"
 done
 
-pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high
+pio check --flags "-DAPP_VERSION=${APP_VERSION} --suppressions-list=suppressions.txt --inline-suppr" $CHECK --skip-packages --pattern="src/" --fail-on-defect=medium --fail-on-defect=high

bin/config-dist.yaml

@@ -6,6 +6,12 @@
 ### Including the "Module:" line!
 ---
 Lora:
+  # Default to auto-detecting the module type
+  # This will be overridden by configs from config.d
+  Module: auto
+
+#  # Uncomment to enable Simulation mode, or use --sim
+#  Module: sim
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -90,9 +96,9 @@ Lora:
 ### Some devices, like the pinedio, may require spidev0.1 as a workaround.
 #  spidev: spidev0.0
 
-### Define GPIO buttons here:
+### Deprecated location for User Button:
 
-GPIO:
+#GPIO:
 #  User: 6
 
 ### Define GPS
@@ -109,17 +115,6 @@ I2C:
 
 Display:
 
-### Waveshare 1.44inch LCD HAT
-#  Panel: ST7735S
-#  CS: 8         #Chip Select
-#  DC: 25        # Data/Command pin
-#  Backlight: 24
-#  Width: 128
-#  Height: 128
-#  Reset: 27
-#  OffsetX: 0
-#  OffsetY: 0
-
 ### Adafruit PiTFT 2.8 TFT+Touchscreen
 #  Panel: ILI9341
 #  CS: 8
@@ -174,6 +169,16 @@ Input:
 
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
+### Standard User Button Config
+#  UserButton: 6
+
+### Trackball/Joystick input
+#  TrackballUp: 6
+#  TrackballDown: 19
+#  TrackballLeft: 5
+#  TrackballRight: 26
+#  TrackballPress: 13
+
 ###
 
 Logging:
@@ -182,14 +187,22 @@ Logging:
 #  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
-#  Port: 443 # Port for Webserver & Webservices
+#  Port: 9443 # Port for Webserver & Webservices
 #  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
 #  SSLKey: /etc/meshtasticd/ssl/private_key.pem # Path to SSL Key, generated if not present
 #  SSLCert: /etc/meshtasticd/ssl/certificate.pem # Path to SSL Certificate, generated if not present
 
+
+HostMetrics:
+#  ReportInterval: 30 # Interval in minutes between HostMetrics report packets, or 0 for disabled
+#  Channel: 0 # channel to send Host Metrics over. Defaults to the primary channel.
+#  UserStringCommand: cat /sys/firmware/devicetree/base/serial-number # Command to execute, to send the results as the userString
+
+
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
   ConfigDirectory: /etc/meshtasticd/config.d/
+  AvailableDirectory: /etc/meshtasticd/available.d/
 #  MACAddress: AA:BB:CC:DD:EE:FF
-#  MACAddressSource: eth0
+#  MACAddressSource: eth0

bin/config.d/MUI/X11_480x480.yaml

@@ -0,0 +1,4 @@
+Display:
+  Panel: X11
+  Width: 480
+  Height: 480

bin/config.d/display-waveshare-1-44.yaml

@@ -0,0 +1,26 @@
+### Waveshare 1.44inch LCD HAT
+Display:
+  Panel: ST7735S
+  spidev: spidev0.0  # Specify either the spidev here, or the CS below
+#  CS: 8         #Chip Select # Optional, as this is the default pin for spidev0.0
+  DC: 25        # Data/Command pin
+  Backlight: 24
+  Width: 128
+  Height: 128
+  Reset: 27
+  OffsetX: 2
+  OffsetY: 1
+
+
+#  OffsetY: 31  # These two options are used to properly flip the screen 180 degrees
+#  OffsetRotate: 3
+
+
+Input:
+  TrackballUp: 6
+  TrackballDown: 19
+  TrackballLeft: 5
+  TrackballRight: 26
+  TrackballPress: 13
+
+#  User: 21

bin/config.d/lora-Adafruit-RFM9x

@@ -1,5 +0,0 @@
-#  Module: RF95  # Adafruit RFM9x
-#  Reset: 25
-#  CS: 7
-#  IRQ: 22
-#  Busy: 23

bin/config.d/lora-Adafruit-RFM9x.yaml

@@ -0,0 +1,6 @@
+Lora:
+  Module: RF95  # Adafruit RFM9x
+  Reset: 25
+  CS: 7
+  IRQ: 22
+#  Busy: 23

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,3 +1,5 @@
+# MeshAdv-Pi E22-900M30S
+# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
 Lora:
   Module: sx1262
   CS: 21
@@ -9,4 +11,4 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   # Only for E22-900M33S:
   # Limit the output power to 8 dBm
-  # SX126X_MAX_POWER: 8
+  # SX126X_MAX_POWER: 8

bin/config.d/lora-MeshAdv-Mini-900M22S.yaml

@@ -0,0 +1,11 @@
+# MeshAdv Mini E22-900M22S
+# https://github.com/chrismyers2000/MeshAdv-Mini
+Lora:
+  Module: sx1262  # Ebyte E22-900M22S 
+  CS: 8
+  IRQ: 16
+  Busy: 20
+  Reset: 24
+  RXen: 12
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-RAK6421.yaml

@@ -0,0 +1,21 @@
+Lora:
+
+  ### RAK13300in Slot 1
+  Module: sx1262
+  IRQ: 22 #IO6
+  Reset: 16 # IO4
+  Busy: 24 # IO5
+  # Ant_sw: 13 # IO3 
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
+  spidev: spidev0.0
+  # CS: 8
+
+
+  ### RAK13300in Slot 2 pins
+#  IRQ: 18 #IO6
+#  Reset: 24 # IO4
+#  Busy: 19 # IO5
+#  # Ant_sw: 23 # IO3 
+#  spidev: spidev0.1
+#  # CS: 7

bin/config.d/lora-lyra-picocalc-wio-sx1262.yaml

@@ -0,0 +1,18 @@
+Lora:
+  Module: sx1262
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  gpiochip: 0
+  MOSI: 12
+  MISO: 13
+  IRQ: 1
+  Busy: 23
+  Reset: 22
+  RXen: 0
+  gpiochip: 1
+  CS: 9
+  SCK: 11
+#  TXen: bridge to DIO2 on E22 module
+  SX126X_MAX_POWER: 22
+  spidev: spidev1.0
+  spiSpeed: 2000000

bin/config.d/lora-piggystick-lr1121.yaml

@@ -0,0 +1,11 @@
+Lora:
+  Module: lr1121
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  spidev: ch341
+  DIO3_TCXO_VOLTAGE: 1.8
+#  USB_Serialnum: 12345678
+  USB_PID: 0x5512
+  USB_VID: 0x1A86

bin/config.d/lora-raxda-rock2f-starter-edition-hat.yaml

@@ -0,0 +1,49 @@
+Lora:
+
+### Raxda Rock 2F running Armbian Linux 6.1.99-vendor-rk35xx
+### https://github.com/markbirss/rock-2f
+### https://github.com/markbirss/lora-starter-edition-sx1262-i2c
+### https://github.com/radxa-pkg/radxa-overlays/blob/main/arch/arm64/boot/dts/rockchip/overlays/rk3528-spi0-cs1-spidev.dts
+### Require install of https://github.com/radxa-pkg/radxa-overlays and rk3528-spi0-cs1-spidev.dtbo copied to /boot/dtb/rockchip/overlay and enabled 
+### in  /boot/armbianEnv.txt - overlays=rk3528-spi0-cs1-spidev
+### The Radxa Rock 2F employs multiple gpio chips.
+### Each gpio pin must be unique, but can be assigned to a specific gpio chip and line.
+### In case solely a no. is given, the default gpio chip and pin == line will be employed.
+###
+  Module: sx1262  # Radxa Rock 2F + Starter Edition SX1262 HAT by Mark Birss
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: 1.8
+  spidev: spidev0.1
+  CS:             # NSS     PIN_24 -> chip 4, line 14
+    pin: 24
+    gpiochip: 4
+    line: 14
+  SCK:            # SCK     PIN_23 -> chip 4, line 12
+    pin: 23
+    gpiochip: 4
+    line: 12
+  Busy:           # BUSY    PIN_7 -> chip 4, line 6
+    pin: 7
+    gpiochip: 4
+    line: 6
+  MOSI:           # MOSI    PIN_19 -> chip 4, line 10
+    pin: 19
+    gpiochip: 4
+    line: 10
+  MISO:           # MISO    PIN_21 -> chip 4, line 11
+    pin: 21
+    gpiochip: 4
+    line: 11
+  Reset:          # NRST    PIN_12 -> chip 1, line 13
+    pin: 12
+    gpiochip: 1
+    line: 13
+  IRQ:            # DIO1    PIN_15 -> chip 4, line 22
+    pin: 15
+    gpiochip: 4
+    line: 22
+#  RXen:           # RXEN    PIN_22 -> chip 3!, line 17
+#    pin: 22
+#    gpiochip: 3
+#    line: 17
+#  TXen: RADIOLIB_NC # TXEN   no PIN, no line, fallback to default gpio chip

bin/config.d/lora-starter-edition-sx1262-i2c.yaml

@@ -0,0 +1,10 @@
+# https://www.waveshare.com/core1262-868m.htm
+# https://github.com/markbirss/lora-starter-edition-sx1262-i2c
+Lora:
+  Module: sx1262  # Starter Edition SX1262 I2C Raspberry Pi HAT
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 8
+  IRQ: 22
+  Busy: 4
+  Reset: 18

bin/config.d/lora-usb-meshtoad-e22.yaml

@@ -0,0 +1,17 @@
+Lora:
+  Module: sx1262
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  RXen: 1
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  spidev: ch341
+  USB_PID: 0x5512
+  USB_VID: 0x1A86
+  # Optional: Reduce power to 10 dBm to
+  # avoid over-drawing the USB port
+  # SX126X_MAX_POWER: 10
+  # Optional: Set the serial number for multi-radio support
+  # USB_Serialnum: 13374201

bin/config.d/lora-ws-raspberry-pi-pico-to-rpi-adapter.yaml

@@ -0,0 +1,10 @@
+# https://www.waveshare.com/pico-lora-sx1262-868m.htm
+# https://github.com/markbirss/lora-ws-raspberry-pi-pico-to-rpi-adapter
+Lora:
+  Module: sx1262  # Waveshare Raspberry Pi Pico to Raspberry Pi HAT Adapter
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 21
+  IRQ: 16
+  Busy: 20
+  Reset: 18

bin/device-install.bat

@@ -1,72 +1,312 @@
 @ECHO OFF
+SETLOCAL EnableDelayedExpansion
+TITLE Meshtastic device-install
 
-set PYTHON=python
-set WEB_APP=0
+SET "SCRIPT_NAME=%~nx0"
+SET "DEBUG=0"
+SET "PYTHON="
+SET "WEB_APP=0"
+SET "TFT_BUILD=0"
+SET "BIGDB8=0"
+SET "BIGDB16=0"
+SET "ESPTOOL_BAUD=115200"
+SET "ESPTOOL_CMD="
+SET "LOGCOUNTER=0"
+SET "BPS_RESET=0"
 
-:: Determine the correct esptool command to use
-where esptool >nul 2>&1
-if %ERRORLEVEL% EQU 0 (
-    set "ESPTOOL_CMD=esptool"
-) else (
-    set "ESPTOOL_CMD=%PYTHON% -m esptool"
-)
+@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
+SET "C3=esp32c3"
+@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
+SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
 
-goto GETOPTS
-:HELP
-echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web]
-echo Flash image file to device, but first erasing and writing system information
-echo.
-echo     -h               Display this help and exit
-echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
-echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
-echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
-echo     --web            Flash WEB APP.
-goto EOF
+GOTO getopts
+:help
+ECHO Flash image file to device, but first erasing and writing system information.
+ECHO.
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web) [--1200bps-reset]
+ECHO.
+ECHO Options:
+ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
+ECHO                      The file must be located in this current directory.
+ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
+ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
+ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
+ECHO                      If supplied the script will use python.
+ECHO                      If not supplied the script will try to find esptool in Path.
+ECHO     --web            Enable WebUI. (default: false)
+ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
+ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
+GOTO eof
 
-:GETOPTS
-if /I "%1"=="-h" goto HELP
-if /I "%1"=="--help" goto HELP
-if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
-if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
-if /I "%1"=="-P" set PYTHON=%2 & SHIFT
-if /I "%1"=="--web" set WEB_APP=1 & SHIFT
+:version
+ECHO %SCRIPT_NAME% [Version 2.6.2]
+ECHO Meshtastic
+GOTO eof
+
+:getopts
+IF "%~1"=="" GOTO endopts
+IF /I "%~1"=="-?" GOTO help
+IF /I "%~1"=="-h" GOTO help
+IF /I "%~1"=="--help" GOTO help
+IF /I "%~1"=="-v" GOTO version
+IF /I "%~1"=="--version" GOTO version
+IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
+IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
+IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
+IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
+IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+IF /I "%~1"=="--web" SET "WEB_APP=1"
+IF /I "%~1"=="--1200bps-reset" SET "BPS_RESET=1"
 SHIFT
-IF NOT "__%1__"=="____" goto GETOPTS
+GOTO getopts
+:endopts
 
-IF "__%FILENAME%__" == "____" (
-    echo "Missing FILENAME"
-    goto HELP
-)
-IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
-    echo Trying to flash update %FILENAME%, but first erasing and writing system information"
-    %ESPTOOL_CMD% --baud 115200 erase_flash
-    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
-    
-    @REM Account for S3 and C3 board's different OTA partition
-    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
-        IF x%FILENAME:esp32c3=%==x%FILENAME% (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
-        ) else (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
-        )
-    ) else (
-        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
+IF %BPS_RESET% EQU 1 GOTO skip-filename
+
+CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
+IF "__!FILENAME!__"=="____" (
+    CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
+    GOTO help
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
+    IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
+        CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
+        GOTO help
     )
-    IF %WEB_APP%==1 (
-        for %%f in (littlefswebui-*.bin) do (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
-        )
-    ) else (
-        for %%f in (littlefs-*.bin) do (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
-        )
+    IF "__!FILENAME:firmware-=!__"=="__!FILENAME!__" (
+        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-* file."
+        GOTO help
     )
-) else (
-    echo "Invalid file: %FILENAME%"
-    goto HELP
-) else (
-    echo "Invalid file: %FILENAME%"
-    goto HELP
+    @REM Remove ".\" or "./" file prefix if present.
+    SET "FILENAME=!FILENAME:.\=!"
+    SET "FILENAME=!FILENAME:./=!"
 )
 
-:EOF
+CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
+IF NOT EXIST !FILENAME! (
+    CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
+    GOTO eof
+)
+
+IF NOT "!FILENAME:update=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
+    CALL :LOG_MESSAGE INFO "Use script device-update.bat to flash update !FILENAME!."
+    GOTO eof
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
+)
+
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
+CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
+IF NOT "__%PYTHON%__"=="____" (
+    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
+    CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
+    WHERE esptool >nul 2>&1
+    IF %ERRORLEVEL% EQU 0 (
+        @REM WHERE exits with code 0 if esptool is found.
+        SET "ESPTOOL_CMD=esptool"
+    ) ELSE (
+        SET "ESPTOOL_CMD=python -m esptool"
+        CALL :RESET_ERROR
+    )
+)
+
+CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
+!ESPTOOL_CMD! >nul 2>&1
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
+    CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
+    EXIT /B 1
+    GOTO eof
+)
+IF %DEBUG% EQU 1 (
+    CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
+    SET "ESPTOOL_CMD=REM !ESPTOOL_CMD!"
+)
+
+CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
+IF "__!ESPTOOL_PORT!__" == "____" (
+    CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
+) ELSE (
+    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
+    CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
+)
+CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
+
+IF %BPS_RESET% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
+@REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+@REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
+IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
+    IF %WEB_APP% EQU 1 (
+        CALL :LOG_MESSAGE ERROR "Cannot enable WebUI (--web) and MUI." & GOTO eof
+    )
+    SET "TFT_BUILD=1"
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
+)
+
+FOR %%a IN (%BIGDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_8MB%.
+        SET "BIGDB8=1"
+        GOTO end_loop_bigdb_8mb
+    )
+)
+:end_loop_bigdb_8mb
+
+FOR %%a IN (%BIGDB_16MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_16MB%.
+        SET "BIGDB16=1"
+        GOTO end_loop_bigdb_16mb
+    )
+)
+:end_loop_bigdb_16mb
+
+IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
+
+@REM Extract BASENAME from %FILENAME% for later use.
+SET "BASENAME=!FILENAME:firmware-=!"
+CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
+
+@REM Account for S3 and C3 board's different OTA partition.
+FOR %%a IN (%S3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %S3%.
+        SET "OTA_FILENAME=bleota-s3.bin"
+        GOTO :end_loop_s3
+    )
+)
+
+FOR %%a IN (%C3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %C3%.
+        SET "OTA_FILENAME=bleota-c3.bin"
+        GOTO :end_loop_c3
+    )
+)
+
+@REM Everything else
+SET "OTA_FILENAME=bleota.bin"
+:end_loop_s3
+:end_loop_c3
+CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
+
+@REM Check if (--web) is enabled and prefix BASENAME with "littlefswebui-" else "littlefs-".
+IF %WEB_APP% EQU 1 (
+    CALL :LOG_MESSAGE INFO "WebUI selected."
+    SET "SPIFFS_FILENAME=littlefswebui-%BASENAME%"
+) ELSE (
+    SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
+)
+CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
+
+@REM Default offsets.
+@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
+SET "OTA_OFFSET=0x260000"
+SET "SPIFFS_OFFSET=0x300000"
+
+@REM Offsets for BigDB 8mb.
+IF %BIGDB8% EQU 1 (
+    SET "OTA_OFFSET=0x340000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
+@REM Offsets for BigDB 16mb.
+IF %BIGDB16% EQU 1 (
+    SET "OTA_OFFSET=0x650000"
+    SET "SPIFFS_OFFSET=0xc90000"
+)
+
+CALL :LOG_MESSAGE DEBUG "Set OTA_OFFSET to: !OTA_OFFSET!"
+CALL :LOG_MESSAGE DEBUG "Set SPIFFS_OFFSET to: !SPIFFS_OFFSET!"
+
+@REM Ensure target files exist before flashing operations.
+IF NOT EXIST !FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
+IF NOT EXIST !OTA_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!OTA_FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
+IF NOT EXIST !SPIFFS_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!SPIFFS_FILENAME!". Terminating." & EXIT /B 2 & GOTO eof
+
+@REM Flashing operations.
+CALL :LOG_MESSAGE INFO "Trying to flash "!FILENAME!", but first erasing and writing system information..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase_flash || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x00 "!FILENAME!" || GOTO eof
+
+CALL :LOG_MESSAGE INFO "Trying to flash BLEOTA "!OTA_FILENAME!" at OTA_OFFSET !OTA_OFFSET!..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
+
+CALL :LOG_MESSAGE INFO "Trying to flash SPIFFS "!SPIFFS_FILENAME!" at SPIFFS_OFFSET !SPIFFS_OFFSET!..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
+
+CALL :LOG_MESSAGE INFO "Script complete!."
+
+:eof
+ENDLOCAL
+EXIT /B %ERRORLEVEL%
+
+
+:RUN_ESPTOOL
+@REM Subroutine used to run ESPTOOL_CMD with arguments.
+@REM Also handles %ERRORLEVEL%.
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
+@REM.
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
+IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
+CALL :RESET_ERROR
+!ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %BPS_RESET% EQU 1 GOTO :eof
+IF %ERRORLEVEL% NEQ 0 (
+    CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
+    EXIT /B %ERRORLEVEL%
+)
+GOTO :eof
+
+:LOG_MESSAGE
+@REM Subroutine used to print log messages in four different levels.
+@REM DEBUG messages only get printed if [-d] flag is passed to script.
+@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
+@REM.
+@REM Example:: CALL :LOG_MESSAGE INFO "Message."
+SET /A LOGCOUNTER=LOGCOUNTER+1
+IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
+IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
+IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
+IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
+GOTO :eof
+
+:GET_TIMESTAMP
+@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
+@REM CALL :GET_TIMESTAMP
+@REM.
+@REM Updates: !TIMESTAMP!
+FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
+    SET "HH=%%a"
+    SET "MM=%%b"
+    SET "ss=%%c"
+)
+SET "TIMESTAMP=!HH!:!MM!:!ss!"
+GOTO :eof
+
+:RESET_ERROR
+@REM Subroutine to reset %ERRORLEVEL% to 0.
+@REM CALL :RESET_ERROR
+@REM.
+@REM Updates: %ERRORLEVEL%
+EXIT /B 0
+GOTO :eof

bin/device-install.sh

@@ -1,7 +1,63 @@
-#!/bin/sh
+#!/bin/bash
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 WEB_APP=false
+BPS_RESET=false
+TFT_BUILD=false
+MCU=""
+
+# Variant groups
+BIGDB_8MB=(
+	"picomputer-s3"
+	"unphone"
+	"seeed-sensecap-indicator"
+	"crowpanel-esp32s3"
+	"heltec_capsule_sensor_v3"
+	"heltec-v3"
+	"heltec-vision-master-e213"
+	"heltec-vision-master-e290"
+	"heltec-vision-master-t190"
+	"heltec-wireless-paper"
+	"heltec-wireless-tracker"
+	"heltec-wsl-v3"
+	"icarus"
+	"seeed-xiao-s3"
+	"tbeam-s3-core"
+	"tracksenger"
+)
+BIGDB_16MB=(
+	"t-deck"
+	"mesh-tab"
+	"t-energy-s3"
+	"dreamcatcher"
+	"ESP32-S3-Pico"
+	"m5stack-cores3"
+	"station-g2"
+    "t-eth-elite"
+    "t-watch-s3"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
+)
+S3_VARIANTS=(
+    "s3"
+    "-v3"
+    "t-deck"
+    "wireless-paper"
+    "wireless-tracker"
+    "station-g2"
+    "unphone"
+    "t-eth-elite"
+    "mesh-tab"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "seeed-sensecap-indicator"
+    "heltec_capsule_sensor_v3"
+    "vision-master"
+    "icarus"
+    "tracksenger"
+    "elecrow-adv"
+)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -19,80 +75,155 @@ set -e
 
 # Usage info
 show_help() {
-	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--web]
-Flash image file to device, but first erasing and writing system information"
+    cat <<EOF
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME] [--web] [--1200bps-reset]
+Flash image file to device, but first erasing and writing system information.
 
-    -h               Display this help and exit
+    -h               Display this help and exit.
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
-    --web            Flash WEB APP.
+    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
+    --web            Enable WebUI. (Default: false)
+    --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
 }
-# Preprocess long options like --web
-for arg in "$@"; do
-    case "$arg" in
-        --web)
-            WEB_APP=true
-            shift # Remove this argument from the list
-            ;;
+# Parse arguments using a single while loop
+while [ $# -gt 0 ]; do
+    case "$1" in
+    -h | --help)
+        show_help
+        exit 0
+        ;;
+    -p)
+        ESPTOOL_CMD="$ESPTOOL_CMD --port $2"
+        shift
+        ;;
+    -P)
+        PYTHON="$2"
+        shift
+        ;;
+    -f)
+        FILENAME="$2"
+        shift
+        ;;
+    --web)
+        WEB_APP=true
+        ;;
+    --1200bps-reset)
+		    BPS_RESET=true
+		    ;;
+    --) # Stop parsing options
+        shift
+        break
+        ;;
+    *)
+        echo "Unknown argument: $1" >&2
+        exit 1
+        ;;
     esac
+    shift # Move to the next argument
 done
 
-while getopts ":hp:P:f:" opt; do
-	case "${opt}" in
-	h)
-		show_help
-		exit 0
-		;;
-	p)
-		export ESPTOOL_PORT=${OPTARG}
-		;;
-	P)
-		PYTHON=${OPTARG}
-		;;
-	f)
-		FILENAME=${OPTARG}
-		;;
-	*)
-		echo "Invalid flag."
-		show_help >&2
-		exit 1
-		;;
-	esac
-done
-shift "$((OPTIND - 1))"
+if [[ $BPS_RESET == true ]]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+	exit 0
+fi
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-	FILENAME=$1
-	shift
+[ -z "$FILENAME" ] && [ -n "$1" ] && {
+    FILENAME="$1"
+    shift
 }
 
+if [[ "$FILENAME" != firmware-* ]]; then
+  echo "Filename must be a firmware-* file."
+  exit 1
+fi
+
+# Check if FILENAME contains "-tft-" and prevent web/mui comingling.
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
+    TFT_BUILD=true
+    if [[ $WEB_APP == true ]] && [[ $TFT_BUILD == true ]]; then
+        echo "Cannot enable WebUI (--web) and MUI."
+        exit 1
+    fi
+fi
+
+# Extract BASENAME from %FILENAME% for later use.
+BASENAME="${FILENAME/firmware-/}"
+
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
-	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	$ESPTOOL_CMD erase_flash
-	$ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
-	# Account for S3 board's different OTA partition
-	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
-		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
-		else
-			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
-		fi
-	else
-		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
-	fi
-	if [ "$WEB_APP" = true ]; then
-		$ESPTOOL_CMD write_flash 0x300000 littlefswebui-*.bin
-	else
-		$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
-	fi
+    # Default littlefs* offset (--web).
+    OFFSET=0x300000
+
+    # Default OTA Offset
+    OTA_OFFSET=0x260000
+
+    # littlefs* offset for BigDB 8mb and OTA OFFSET.
+    for variant in "${BIGDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x340000
+        fi
+    done
+
+    # littlefs* offset for BigDB 16mb and OTA OFFSET.
+    for variant in "${BIGDB_16MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0xc90000
+            OTA_OFFSET=0x650000
+        fi
+    done
+
+    # Account for S3 board's different OTA partition
+    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+    for variant in "${S3_VARIANTS[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            MCU="esp32s3"
+        fi
+    done
+
+    if [ "$MCU" != "esp32s3" ]; then
+        if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+            OTAFILE=bleota.bin
+        else
+            OTAFILE=bleota-c3.bin
+        fi
+    else
+        OTAFILE=bleota-s3.bin
+    fi
+
+    # Check if WEB_APP (--web) is enabled and add "littlefswebui-" to BASENAME else "littlefs-".
+    if [ "$WEB_APP" = true ]; then
+        SPIFFSFILE=littlefswebui-${BASENAME}
+    else
+        SPIFFSFILE=littlefs-${BASENAME}
+    fi
+
+    if [[ ! -f "$FILENAME" ]]; then
+        echo "Error: file ${FILENAME} wasn't found. Terminating."
+        exit 1
+    fi
+    if [[ ! -f "$OTAFILE" ]]; then
+        echo "Error: file ${OTAFILE} wasn't found. Terminating."
+        exit 1
+    fi
+    if [[ ! -f "$SPIFFSFILE" ]]; then
+        echo "Error: file ${SPIFFSFILE} wasn't found. Terminating."
+        exit 1
+    fi
+
+    echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
+    $ESPTOOL_CMD erase_flash
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
+    echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
+    echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
-	show_help
-	echo "Invalid file: ${FILENAME}"
+    show_help
+    echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/device-install_test.ps1

@@ -0,0 +1,112 @@
+<#
+    .SYNOPSIS
+    Unit-test for .\device-install.bat.
+
+    .DESCRIPTION
+    This script performs a positive unit-test on .\device-install.bat by creating the expected .bin
+    files for a device followed by running the .bat script without flashing the firmware (--debug).
+    If any errors are hit they are presented in the standard output. Investigate accordingly.
+
+    This script needs to be placed in the same directory as .\device-install.bat.
+
+    .EXAMPLE
+    .\device-install_test.ps1
+
+    .EXAMPLE
+    .\device-install_test.ps1 -Verbose
+
+    .LINK
+    .\device-install.bat --help
+#>
+
+[CmdletBinding()]
+param()
+
+function New-EmptyFile() {
+    [CmdletBinding()]
+    param (
+        [Parameter(Position = 0, Mandatory = $true)]
+        # Specifies the file name.
+        [string]$FileName,
+        [Parameter(Position = 1)]
+        # Specifies the target path. (Get-Location).Path is the default.
+        [string]$Directory = (Get-Location).Path
+    )
+
+    $filePath = Join-Path -Path $Directory -ChildPath $FileName
+
+    Write-Verbose -Message "Create empty test file if it doesn't exist: $($FileName)"
+    New-Item -Path "$filePath" -ItemType File -ErrorAction SilentlyContinue | Out-Null
+}
+
+function Remove-EmptyFile() {
+    [CmdletBinding()]
+    param (
+        [Parameter(Position = 0, Mandatory = $true)]
+        # Specifies the file name.
+        [string]$FileName,
+        [Parameter(Position = 1)]
+        # Specifies the target path. (Get-Location).Path is the default.
+        [string]$Directory = (Get-Location).Path
+    )
+
+    $filePath = Join-Path -Path $Directory -ChildPath $FileName
+
+    Write-Verbose -Message "Deleted empty test file: $($FileName)"
+    Remove-Item -Path "$filePath" | Out-Null
+}
+
+
+$TestCases = New-Object -TypeName PSObject -Property @{
+    # Use this PSObject to define testcases according to this syntax:
+    # "testname" = @("firmware-testname","bleota","littlefs-testname","args")
+    "t-deck"                       = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-2.6.0.0b106d4.bin", "")
+    "t-deck_web"                   = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-t-deck-2.6.0.0b106d4.bin", "--web")
+    "t-deck-tft"                   = @("firmware-t-deck-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-tft-2.6.0.0b106d4.bin", "")
+    "heltec-ht62-esp32c3"          = @("firmware-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "bleota-c3.bin", "littlefs-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "")
+    "tlora-c6"                     = @("firmware-tlora-c6-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-tlora-c6-2.6.0.0b106d4.bin", "")
+    "heltec-v3_web"                = @("firmware-heltec-v3-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-heltec-v3-2.6.0.0b106d4.bin", "--web")
+    "seeed-sensecap-indicator-tft" = @("firmware-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "")
+    "picomputer-s3-tft"            = @("firmware-picomputer-s3-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-picomputer-s3-tft-2.6.0.0b106d4.bin", "")
+}
+
+foreach ($TestCase in $TestCases.PSObject.Properties) {
+    $Name = $TestCase.Name
+    $Files = $TestCase.Value
+    $Errors = $null
+    $Counter = 0
+
+    Write-Host -Object "Testcase: $Name`:" -ForegroundColor Green
+    foreach ($File in $Files) {
+        if ($File.EndsWith(".bin")) {
+            New-EmptyFile -FileName $File
+        }
+    }
+
+    Write-Host -Object "Performing test on $Name..." -ForegroundColor Blue
+    $Test = Invoke-Expression -Command "cmd /c .\device-install.bat --debug -f $($TestCases."$Name"[0]) $($TestCases."$Name"[3])"
+
+    foreach ($Line in $Test) {
+        if ($Line -match "Set OTA_OFFSET to" -or `
+                $Line -match "Set SPIFFS_OFFSET to") {
+            Write-Host -Object "$($Line -replace "^.*?Set","Set")" -ForegroundColor Blue
+        }
+        elseif ($VerbosePreference -eq "Continue") {
+            Write-Host -Object $Line
+        }
+        if ($Line -match "ERROR") {
+            $Errors += $Line
+            $Counter++
+        }
+    }
+    if ($null -ne $Errors) {
+        Write-Host -Object "$Counter ERROR(s) detected!" -ForegroundColor Red
+        if (-not ($VerbosePreference -eq "Continue")) { Write-Host -Object $Errors }
+    }
+
+    foreach ($File in $Files) {
+        if ($File.EndsWith(".bin")) {
+            Remove-EmptyFile -FileName $File
+        }
+    }
+}

bin/device-update.bat

@@ -1,48 +1,193 @@
 @ECHO OFF
+SETLOCAL EnableDelayedExpansion
+TITLE Meshtastic device-update
 
-set PYTHON=python
+SET "SCRIPT_NAME=%~nx0"
+SET "DEBUG=0"
+SET "PYTHON="
+SET "ESPTOOL_BAUD=115200"
+SET "ESPTOOL_CMD="
+SET "LOGCOUNTER=0"
+SET "CHANGE_MODE=0"
 
-:: Determine the correct esptool command to use
-where esptool >nul 2>&1
-if %ERRORLEVEL% EQU 0 (
-    set "ESPTOOL_CMD=esptool"
-) else (
-    set "ESPTOOL_CMD=%PYTHON% -m esptool"
-)
+GOTO getopts
+:help
+ECHO Flash image file to device, but leave existing system intact.
+ECHO.
+ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--change-mode]
+ECHO.
+ECHO Options:
+ECHO     -f filename      The update .bin file to flash.  Custom to your device type and region. (required)
+ECHO                      The file must be located in this current directory.
+ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
+ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
+ECHO     -P python        Specify alternate python interpreter to use to invoke esptool. (default: python)
+ECHO                      If supplied the script will use python.
+ECHO                      If not supplied the script will try to find esptool in Path.
+ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps Reset)
+ECHO                      Some hardware requires this twice.
+ECHO.
+ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
+GOTO eof
 
-goto GETOPTS
-:HELP
-echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
-echo Flash image file to device, leave existing system intact.
-echo.
-echo     -h               Display this help and exit
-echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
-echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
-echo     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
-goto EOF
+:version
+ECHO %SCRIPT_NAME% [Version 2.6.2]
+ECHO Meshtastic
+GOTO eof
 
-:GETOPTS
-if /I "%1"=="-h" goto HELP
-if /I "%1"=="--help" goto HELP
-if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
-if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
-if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+:getopts
+IF "%~1"=="" GOTO endopts
+IF /I "%~1"=="-?" GOTO help
+IF /I "%~1"=="-h" GOTO help
+IF /I "%~1"=="--help" GOTO help
+IF /I "%~1"=="-v" GOTO version
+IF /I "%~1"=="--version" GOTO version
+IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
+IF /I "%~1"=="-f" SET "FILENAME=%~2" & SHIFT
+IF "%~1"=="-p" SET "ESPTOOL_PORT=%~2" & SHIFT
+IF /I "%~1"=="--port" SET "ESPTOOL_PORT=%~2" & SHIFT
+IF "%~1"=="-P" SET "PYTHON=%~2" & SHIFT
+IF /I "%~1"=="--change-mode" SET "CHANGE_MODE=1"
 SHIFT
-IF NOT "__%1__"=="____" goto GETOPTS
+GOTO getopts
+:endopts
 
-IF "__%FILENAME%__" == "____" (
-    echo "Missing FILENAME"
-    goto HELP
-)
-IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
-    echo Trying to flash update %FILENAME%
-    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
-) else (
-    echo "Invalid file: %FILENAME%"
-    goto HELP
-) else (
-    echo "Invalid file: %FILENAME%"
-    goto HELP
+IF %CHANGE_MODE% EQU 1 GOTO skip-filename
+
+CALL :LOG_MESSAGE DEBUG "Checking FILENAME parameter..."
+IF "__!FILENAME!__"=="____" (
+    CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
+    GOTO help
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
+    IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
+        CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
+        GOTO help
+    )
+    @REM Remove ".\" or "./" file prefix if present.
+    SET "FILENAME=!FILENAME:.\=!"
+    SET "FILENAME=!FILENAME:./=!"
 )
 
-:EOF
+CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
+IF NOT EXIST !FILENAME! (
+    CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."
+    GOTO eof
+)
+
+IF "!FILENAME:update=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
+    CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
+    GOTO eof
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
+)
+
+:skip-filename
+SET "ESPTOOL_BAUD=1200"
+
+CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
+IF NOT "__%PYTHON%__"=="____" (
+    SET "ESPTOOL_CMD=!PYTHON! -m esptool"
+    CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
+    WHERE esptool >nul 2>&1
+    IF %ERRORLEVEL% EQU 0 (
+        @REM WHERE exits with code 0 if esptool is found.
+        SET "ESPTOOL_CMD=esptool"
+    ) ELSE (
+        SET "ESPTOOL_CMD=python -m esptool"
+        CALL :RESET_ERROR
+    )
+)
+
+CALL :LOG_MESSAGE DEBUG "Checking esptool command !ESPTOOL_CMD!..."
+!ESPTOOL_CMD! >nul 2>&1
+IF %ERRORLEVEL% GEQ 2 (
+    @REM esptool exits with code 1 if help is displayed.
+    CALL :LOG_MESSAGE ERROR "esptool not found: !ESPTOOL_CMD!"
+    EXIT /B 1
+    GOTO eof
+)
+IF %DEBUG% EQU 1 (
+    CALL :LOG_MESSAGE DEBUG "Skipping ESPTOOL_CMD steps."
+    SET "ESPTOOL_CMD=REM !ESPTOOL_CMD!"
+)
+
+CALL :LOG_MESSAGE DEBUG "Using esptool command: !ESPTOOL_CMD!"
+IF "__!ESPTOOL_PORT!__" == "____" (
+    CALL :LOG_MESSAGE WARN "Using esptool port: UNSET."
+) ELSE (
+    SET "ESPTOOL_CMD=!ESPTOOL_CMD! --port !ESPTOOL_PORT!"
+    CALL :LOG_MESSAGE INFO "Using esptool port: !ESPTOOL_PORT!."
+)
+CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
+
+IF %CHANGE_MODE% EQU 1 (
+    @REM Attempt to change mode via 1200bps Reset.
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    GOTO eof
+)
+
+@REM Flashing operations.
+CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
+
+CALL :LOG_MESSAGE INFO "Script complete!."
+
+:eof
+ENDLOCAL
+EXIT /B %ERRORLEVEL%
+
+
+:RUN_ESPTOOL
+@REM Subroutine used to run ESPTOOL_CMD with arguments.
+@REM Also handles %ERRORLEVEL%.
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
+@REM.
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
+IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
+CALL :RESET_ERROR
+!ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4
+IF %CHANGE_MODE% EQU 1 GOTO :eof
+IF %ERRORLEVEL% NEQ 0 (
+    CALL :LOG_MESSAGE ERROR "Error running command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
+    EXIT /B %ERRORLEVEL%
+)
+GOTO :eof
+
+:LOG_MESSAGE
+@REM Subroutine used to print log messages in four different levels.
+@REM DEBUG messages only get printed if [-d] flag is passed to script.
+@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
+@REM.
+@REM Example:: CALL :LOG_MESSAGE INFO "Message."
+SET /A LOGCOUNTER=LOGCOUNTER+1
+IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
+IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
+IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
+IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
+GOTO :eof
+
+:GET_TIMESTAMP
+@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
+@REM CALL :GET_TIMESTAMP
+@REM.
+@REM Updates: !TIMESTAMP!
+FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
+    SET "HH=%%a"
+    SET "MM=%%b"
+    SET "ss=%%c"
+)
+SET "TIMESTAMP=!HH!:!MM!:!ss!"
+GOTO :eof
+
+:RESET_ERROR
+@REM Subroutine to reset %ERRORLEVEL% to 0.
+@REM CALL :RESET_ERROR
+@REM.
+@REM Updates: %ERRORLEVEL%
+EXIT /B 0
+GOTO :eof

bin/device-update.sh

@@ -1,6 +1,7 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+CHANGE_MODE=false
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -17,14 +18,15 @@ fi
 # Usage info
 show_help() {
 cat << EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Usage: $(basename "$0") [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--change-mode]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
-    
+    --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
+
 EOF
 }
 
@@ -35,14 +37,17 @@ while getopts ":hp:P:f:" opt; do
             show_help
             exit 0
             ;;
-        p)  export ESPTOOL_PORT=${OPTARG}
-	    ;;
+        p)  ESPTOOL_CMD="$ESPTOOL_CMD --port ${OPTARG}"
+            ;;
         P)  PYTHON=${OPTARG}
             ;;
         f)  FILENAME=${OPTARG}
             ;;
+	    --change-mode)
+            CHANGE_MODE=true
+            ;;
         *)
- 	        echo "Invalid flag."
+            echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -50,17 +55,22 @@ while getopts ":hp:P:f:" opt; do
 done
 shift "$((OPTIND-1))"
 
-[ -z "$FILENAME" -a -n "$1" ] && {
-    FILENAME=$1
+if [[ $CHANGE_MODE == true ]]; then
+	$ESPTOOL_CMD --baud 1200 --after no_reset read_flash_status
+    exit 0
+fi
+
+[ -z "$FILENAME" ]  && [ -n "$1" ] && {
+    FILENAME="$1"
     shift
 }
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
-	printf "Trying to flash update ${FILENAME}"
-	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
+    echo "Trying to flash update ${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
-	show_help
-	echo "Invalid file: ${FILENAME}"
+    show_help
+    echo "Invalid file: ${FILENAME}"
 fi
 
 exit 0

bin/generate_ci_matrix.py

@@ -27,7 +27,7 @@ for subdir, dirs, files in os.walk(rootdir):
                 if c.startswith("env:"):
                     section = config[c].name[4:]
                     if "extends" in config[config[c].name]:
-                        if config[config[c].name]["extends"] == options[0] + "_base":
+                        if options[0] + "_base" in config[config[c].name]["extends"]:
                             if "board_level" in config[config[c].name]:
                                 if (
                                     config[config[c].name]["board_level"] == "extra"
@@ -35,6 +35,11 @@ for subdir, dirs, files in os.walk(rootdir):
                                     outlist.append(section)
                             else:
                                 outlist.append(section)
+                        # Add the TFT variants if the base variant is selected
+                        elif section.replace("-tft", "") in outlist and config[config[c].name].get("board_level") != "extra":
+                            outlist.append(section)
+                        elif section.replace("-inkhud", "") in outlist and config[config[c].name].get("board_level") != "extra":
+                            outlist.append(section)
                     if "board_check" in config[config[c].name]:
                         if (config[config[c].name]["board_check"] == "true") & (
                             "check" in options
@@ -43,4 +48,4 @@ for subdir, dirs, files in os.walk(rootdir):
 if ("quick" in options) & (len(outlist) > 3):
     print(json.dumps(random.sample(outlist, 3)))
 else:
-    print(json.dumps(outlist))
+    print(json.dumps(outlist))

bin/meshtasticd.service

@@ -5,10 +5,11 @@ StartLimitInterval=200
 StartLimitBurst=5
 
 [Service]
-User=root
-Group=root
+AmbientCapabilities=CAP_NET_BIND_SERVICE
+User=meshtasticd
+Group=meshtasticd
 Type=simple
-ExecStart=/usr/sbin/meshtasticd
+ExecStart=/usr/bin/meshtasticd
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
+cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.desktop

@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=Meshtastic
+Comment=Meshtastic App
+Exec=meshtasticd
+Icon=org.meshtastic.meshtasticd
+Terminal=true
+Type=Application
+Categories=Network;Chat;HamRadio;

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -0,0 +1,127 @@
+<?xml version='1.0' encoding='UTF-8'?>
+<component type="desktop-application">
+  <id>org.meshtastic.meshtasticd</id>
+
+  <name>Meshtastic</name>
+  <summary>Decentralized mesh communication</summary>
+
+  <metadata_license>CC-BY-4.0</metadata_license>
+  <project_license>GPL-3.0-or-later</project_license>
+
+  <developer id="org.meshtastic">
+    <name>Meshtastic</name>
+  </developer>
+
+  <description>
+    <p>
+      Meshtastic is an open source project for creating off-grid, affordable, and resilient communication with LoRa mesh networks.
+    </p>
+  </description>
+
+  <launchable type="desktop-id">org.meshtastic.meshtasticd.desktop</launchable>
+
+  <categories>
+    <category>Network</category>
+    <category>Chat</category>
+    <category>HamRadio</category>
+  </categories>
+  <keywords>
+    <keyword>mesh</keyword>
+    <keyword>LoRa</keyword>
+  </keywords>
+
+  <recommends>
+    <control>keyboard</control>
+    <control>pointing</control>
+    <control>touch</control>
+  </recommends>
+  <requires>
+    <display_length compare="ge">360</display_length>
+  </requires>
+
+  <branding>
+    <color type="primary" scheme_preference="light">#97be89</color>
+    <color type="primary" scheme_preference="dark">#206538</color>
+  </branding>
+
+  <content_rating type="oars-1.1">
+    <content_attribute id="social-chat">intense</content_attribute>
+    <content_attribute id="social-location">intense</content_attribute>
+  </content_rating>
+
+  <url type="bugtracker">https://github.com/meshtastic/firmware/issues</url>
+  <url type="homepage">https://meshtastic.org/</url>
+  <url type="donation">https://opencollective.com/meshtastic</url>
+  <url type="faq">https://meshtastic.org/docs/software/linux/usage/</url>
+  <url type="vcs-browser">https://github.com/meshtastic/firmware/</url>
+
+  <screenshots>
+    <screenshot type="default">
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_home_dashboard_dark.webp</image>
+      <caption>Home Dashboard</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_initial_boot.webp</image>
+      <caption>Setup</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_node_list_dark.webp</image>
+      <caption>Nodes List</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_list_dark.webp</image>
+      <caption>Chats List</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_chat_message_dark.webp</image>
+      <caption>Messages</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_map_dark.webp</image>
+      <caption>Map</caption>
+    </screenshot>
+    <screenshot>
+      <image>https://meshtastic.org/img/software/meshtastic-ui/mui_settings_dark.webp</image>
+      <caption>Settings</caption>
+    </screenshot>
+  </screenshots>
+
+  <releases>
+    <release version="2.7.1" date="2025-06-21">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.1</url>
+    </release>
+    <release version="2.7.0" date="2025-06-20">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.0</url>
+    </release>
+    <release version="2.6.13" date="2025-06-16">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.13</url>
+    </release>
+    <release version="2.6.12" date="2025-06-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.12</url>
+    </release>
+    <release version="2.6.11" date="2025-06-02">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.11</url>
+    </release>
+    <release version="2.6.10" date="2025-05-25">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.10</url>
+    </release>
+    <release version="2.6.9" date="2025-05-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.9</url>
+    </release>
+    <release version="2.6.8" date="2025-05-05">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.8</url>
+    </release>
+    <release version="2.6.7" date="2025-04-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.7</url>
+    </release>
+    <release version="2.6.6" date="2025-04-15">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.6</url>
+    </release>
+    <release version="2.6.5" date="2025-03-30">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.5</url>
+    </release>
+    <release version="2.6.4" date="2025-03-28">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.4</url>
+    </release>
+  </releases>
+</component>

bin/org.meshtastic.meshtasticd.svg

@@ -0,0 +1,16 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" width="512" height="512" viewBox="0 0 512 512" xml:space="preserve">
+<desc>Created with Fabric.js 4.6.0</desc>
+<defs>
+</defs>
+<g transform="matrix(1 0 0 1 256 256)" id="xYQ9Gk9Jwpgj_HMOXB3F_"  >
+<path style="stroke: rgb(213,130,139); stroke-width: 0; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: miter; stroke-miterlimit: 4; fill: rgb(103,234,148); fill-rule: nonzero; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-256, -256)" d="M 0 0 L 512 0 L 512 512 L 0 512 z" stroke-linecap="round" />
+</g>
+<g transform="matrix(1.79 0 0 1.79 313.74 258.36)" id="1xBsk2n9FZp60Rz1O-ceJ"  >
+<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-250.97, -362.41)" d="M 250.908 330.267 L 193.126 415.005 L 180.938 406.694 L 244.802 313.037 C 246.174 311.024 248.453 309.819 250.889 309.816 C 253.326 309.814 255.606 311.015 256.982 313.026 L 320.994 406.536 L 308.821 414.869 L 250.908 330.267 Z" stroke-linecap="round" />
+</g>
+<g transform="matrix(1.81 0 0 1.81 145 256.15)" id="KxN7E9YpbyPgz0S4z4Cl6"  >
+<path style="stroke: none; stroke-width: 1; stroke-dasharray: none; stroke-linecap: butt; stroke-dashoffset: 0; stroke-linejoin: round; stroke-miterlimit: 2; fill: rgb(44,45,60); fill-rule: evenodd; opacity: 1;" vector-effect="non-scaling-stroke"  transform=" translate(-115.14, -528.06)" d="M 87.642 581.398 L 154.757 482.977 L 142.638 474.713 L 75.523 573.134 L 87.642 581.398 Z" stroke-linecap="round" />
+</g>
+</svg>

bin/platformio-custom.py

@@ -83,7 +83,7 @@ if platform.name == "espressif32":
 
 if platform.name == "nordicnrf52":
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
                                         "Generating UF2 file"))
 
 Import("projenv")
@@ -125,4 +125,9 @@ for flag in flags:
     
 projenv.Append(
     CCFLAGS=flags,
-)
+)
+
+for lb in env.GetLibBuilders():
+    if lb.name == "meshtastic-device-ui":
+        lb.env.Append(CPPDEFINES=[("APP_VERSION", verObj["long"])])
+        break

bin/regen-protos.bat

@@ -1 +1,10 @@
-cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
+@ECHO OFF
+SETLOCAL
+
+cd protobufs
+..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
+GOTO eof
+
+:eof
+ENDLOCAL
+EXIT /B %ERRORLEVEL%

bin/rpkg.macros

@@ -2,6 +2,10 @@ function meshtastic_version {
     meshtastic_version=$(python3 bin/buildinfo.py short)
     echo -n "$meshtastic_version"
 }
+function web_version {
+    web_version=$(cat bin/web.version)
+    echo -n "$web_version"
+}
 function git_commits_num {
     total_commits=$(git rev-list --all --count)
     echo -n "$total_commits"

bin/uf2-convert.bat

@@ -1,2 +1,124 @@
-@echo off
-if [%1]==[] (echo "Please specify a platformio NRF target (i.e. rak4631) as the first argument.") else (python3 .\bin\uf2conv.py .\.pio\build\%1\firmware.hex -c -o .\.pio\build\%1\firmware.uf2 -f 0xADA52840)
+@ECHO OFF
+SETLOCAL EnableDelayedExpansion
+TITLE Meshtastic uf2-convert
+
+SET "SCRIPT_NAME=%~nx0"
+SET "DEBUG=0"
+SET "NRF=0"
+SET "UF2CONV_CMD=python3 .\bin\uf2conv.py"
+
+GOTO getopts
+:help
+ECHO.
+ECHO Usage: %SCRIPT_NAME% -t [t-echo^|rak4631^|nano-g2-ultra^|wio-tracker-wm1110^|canaryone^|
+ECHO                                 heltec-mesh-node-t114^|tracker-t1000-e^|rak_wismeshtap^|rak2560^|
+ECHO                                 nrf52_promicro_diy_tcxo]
+ECHO.
+ECHO Options:
+ECHO     -t target        Specify a platformio NRF target to build for. (required)
+ECHO.
+ECHO Example: %SCRIPT_NAME% -t rak4631
+GOTO eof
+
+:version
+ECHO %SCRIPT_NAME% [Version 2.6.0]
+ECHO Meshtastic
+GOTO eof
+
+:getopts
+IF "%~1"=="" GOTO endopts
+IF /I "%~1"=="-?" GOTO help
+IF /I "%~1"=="-h" GOTO help
+IF /I "%~1"=="--help" GOTO help
+IF /I "%~1"=="-v" GOTO version
+IF /I "%~1"=="--version" GOTO version
+IF /I "%~1"=="--debug" SET "DEBUG=1" & CALL :LOG_MESSAGE DEBUG "DEBUG mode: enabled."
+IF /I "%~1"=="-t" SET "TARGETNAME=%~2" & SHIFT
+IF /I "%~1"=="--target" SET "TARGETNAME=%~2" & SHIFT
+SHIFT
+GOTO getopts
+:endopts
+
+CALL :LOG_MESSAGE DEBUG "Checking TARGETNAME parameter..."
+IF "__!TARGETNAME!__"=="____" (
+    CALL :LOG_MESSAGE DEBUG "Missing -t target input."
+    GOTO help
+)
+
+IF %DEBUG% EQU 1 SET "UF2CONV_CMD=REM python3 .\bin\uf2conv.py"
+
+SET "NRFTARGETS=t-echo rak4631 nano-g2-ultra wio-tracker-wm1110 canaryone heltec-mesh-node-t114 tracker-t1000-e rak_wismeshtap rak2560 nrf52_promicro_diy_tcxo"
+FOR %%a IN (%NRFTARGETS%) DO (
+    IF /I "%%a"=="!TARGETNAME!" (
+        @REM We are working with any of %NRFTARGETS%.
+        SET "NRF=1"
+        GOTO end_loop_nrf
+    )
+)
+:end_loop_nrf
+
+@REM Building operations.
+IF !NRF! EQU 1 (
+    CALL :LOG_MESSAGE INFO "Trying to build for !TARGETNAME!..."
+    CALL :RUN_UF2CONV !TARGETNAME! || GOTO eof
+) ELSE (
+    CALL :LOG_MESSAGE WARN "!TARGETNAME! is not supported..."
+    GOTO eof
+)
+
+CALL :LOG_MESSAGE INFO "Script complete!."
+
+
+:eof
+ENDLOCAL
+EXIT /B %ERRORLEVEL%
+
+
+:RUN_UF2CONV
+@REM Subroutine used to run .\bin\uf2conv.py with arguments.
+@REM Also handles %ERRORLEVEL%.
+@REM CALL :RUN_UF2CONV [target]
+@REM.
+@REM Example:: CALL :RUN_UF2CONV rak4631
+IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840"
+CALL :RESET_ERROR
+!UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840
+IF %ERRORLEVEL% NEQ 0 (
+    CALL :LOG_MESSAGE ERROR "Error running command: !UF2CONV_CMD! .\.pio\build\%~1\firmware.hex -c -o .\.pio\build\%~1\firmware.uf2 -f 0xADA52840"
+    EXIT /B %ERRORLEVEL%
+)
+GOTO :eof
+
+:LOG_MESSAGE
+@REM Subroutine used to print log messages in four different levels.
+@REM DEBUG messages only get printed if [-d] flag is passed to script.
+@REM CALL :LOG_MESSAGE [ERROR|INFO|WARN|DEBUG] "Message"
+@REM.
+@REM Example:: CALL :LOG_MESSAGE INFO "Message."
+SET /A LOGCOUNTER=LOGCOUNTER+1
+IF "%1" == "ERROR" CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
+IF "%1" == "INFO" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
+IF "%1" == "WARN" CALL :GET_TIMESTAMP & ECHO %1  ^| !TIMESTAMP! !LOGCOUNTER! %~2
+IF "%1" == "DEBUG" IF %DEBUG% EQU 1 CALL :GET_TIMESTAMP & ECHO %1 ^| !TIMESTAMP! !LOGCOUNTER! %~2
+GOTO :eof
+
+:GET_TIMESTAMP
+@REM Subroutine used to set !TIMESTAMP! to HH:MM:ss.
+@REM CALL :GET_TIMESTAMP
+@REM.
+@REM Updates: !TIMESTAMP!
+FOR /F "tokens=1,2,3 delims=:,." %%a IN ("%TIME%") DO (
+    SET "HH=%%a"
+    SET "MM=%%b"
+    SET "ss=%%c"
+)
+SET "TIMESTAMP=!HH!:!MM!:!ss!"
+GOTO :eof
+
+:RESET_ERROR
+@REM Subroutine to reset %ERRORLEVEL% to 0.
+@REM CALL :RESET_ERROR
+@REM.
+@REM Updates: %ERRORLEVEL%
+EXIT /B 0
+GOTO :eof

bin/web.version

@@ -0,0 +1 @@
+2.5.3

boards/ThinkNode-M1.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_TTGO_EINK -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_eink",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "elecrow eink",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.elecrow.com/thinknode-m1-meshtastic-lora-signal-transceiver-powered-by-nrf52840-with-154-screen-support-gps.html",
+  "vendor": "ELECROW"
+}

boards/crowpanel.json

@@ -0,0 +1,43 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "ESP32-S3-WROOM-1-N16R8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-WROOM-1-N16R8 (16 MB Flash, 8 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 524288,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "monitor": {
+    "speed": 115200
+  },
+  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
+  "vendor": "Espressif"
+}

boards/esp32-s3-pico.json

@@ -7,13 +7,15 @@
     "core": "esp32",
     "extra_flags": [
       "-DARDUINO_ESP32S3_DEV",
-      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DBOARD_HAS_PSRAM"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "qio",
     "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/gat562_mesh_trial_tracker.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "GAT562 Mesh Trial Tracker",
+    "mcu": "nrf52840",
+    "variant": "gat562_mesh_trial_tracker",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino", "freertos"],
+  "name": "GAT562 Mesh Trial Tracker",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "http://www.gat-iot.com/",
+  "vendor": "GAT-IOT"
+}

boards/heltec_mesh_node_t114.json

@@ -48,6 +48,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
+  "url": "https://heltec.org/project/mesh-node-t114/",
   "vendor": "Heltec"
 }

boards/heltec_mesh_pocket.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "HT-n5262",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_pocket",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://heltec.org/project/meshpocket/",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_e213.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_e290.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/heltec_vision_master_t190.json

@@ -2,7 +2,8 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
     },
     "core": "esp32",
     "extra_flags": [
@@ -15,6 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [
       ["0x303A", "0x1001"],
       ["0x303A", "0x0002"]

boards/seeed-sensecap-indicator.json

@@ -18,6 +18,7 @@
     "f_boot": "120000000L",
     "boot": "qio",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [["0x1A86", "0x7523"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

boards/seeed-xiao-s3.json

@@ -15,6 +15,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
+    "psram_type": "opi",
     "hwids": [["0x2886", "0x0059"]],
     "mcu": "esp32s3",
     "variant": "seeed-xiao-s3"

boards/seeed_solar_node.json

@@ -0,0 +1,54 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_MDBT50Q_RX -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x2886", "0x0059"]],
+    "usb_product": "XIAO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "seeed_solar_node",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "seeed_solar_node",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/Seeed-XIAO-BLE-Sense-nRF52840-p-5253.html",
+  "vendor": "Seeed Studio"
+}