ThinkNode G3, ETH support WIP

* Add needed support bits for the Meshstick

* Portduino: Reduce allowed length by one byte to prevent possible overflow

.github/workflows/first_time_contributor.yml

@@ -22,7 +22,7 @@ jobs:
             ### @{fc-author}, Welcome to Meshtastic! :wave:
 
             Thanks for opening your first issue. If it's helpful, an easy way
-            to get logs is the "Open Serial Monitor" button on the (Web Flasher](https://flasher.meshtastic.org).
+            to get logs is the "Open Serial Monitor" button on the [Web Flasher](https://flasher.meshtastic.org).
 
             If you have ideas for features, note that we often debate big ideas
             in the [discussions tab](https://github.com/meshtastic/firmware/discussions/categories/ideas)

.github/workflows/main_matrix.yml

@@ -8,7 +8,9 @@ on:
     branches:
       - master
       - develop
+      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
+      - feature/*
     paths-ignore:
       - "**.md"
       - version.properties
@@ -18,7 +20,9 @@ on:
     branches:
       - master
       - develop
+      - pioarduino # Remove when merged // use `feature/` in the future.
       - event/*
+      - feature/*
     paths-ignore:
       - "**.md"
       #- "**.yml"

.github/workflows/test_native.yml

@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.3.0
+        uses: dorny/test-reporter@v2.4.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

.trunk/trunk.yaml

@@ -8,8 +8,8 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.495
-    - renovate@42.66.8
+    - checkov@3.2.496
+    - renovate@42.66.14
     - prettier@3.7.4
     - trufflehog@3.92.4
     - yamllint@1.37.1

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.6.x            | :white_check_mark: |
-| <= 2.5.x         | :x:                |
+| 2.7.x            | :white_check_mark: |
+| <= 2.6.x         | :x:                |
 
 ## Reporting a Vulnerability
 

bin/build-esp32.sh

@@ -38,4 +38,4 @@ cp bin/device-install.* $OUTDIR/
 cp bin/device-update.* $OUTDIR/
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true

bin/build-nrf52.sh

@@ -49,4 +49,4 @@ if (echo $1 | grep -q "rak4631"); then
 fi
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true

bin/build-rp2xx0.sh

@@ -30,4 +30,4 @@ echo "Copying uf2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true

bin/build-stm32wl.sh

@@ -30,4 +30,4 @@ echo "Copying STM32 bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -0,0 +1,14 @@
+Lora:
+  Module: sx1262
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  RXen: 1
+  DIO2_AS_RF_SWITCH: true
+  spidev: ch341
+  DIO3_TCXO_VOLTAGE: true
+#  USB_Serialnum: 12345678
+  USB_PID: 0x5512
+  USB_VID: 0x1A86
+  SX126X_MAX_POWER: 22

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,9 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.18" date="2026-01-02">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
+    </release>
     <release version="2.7.17" date="2025-11-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
     </release>

bin/platformio-custom.py

@@ -2,11 +2,12 @@
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
-from os.path import join, basename, isfile
+from os.path import join
 import subprocess
 import json
 import re
 from datetime import datetime
+from typing import Dict
 
 from readprops import readProps
 
@@ -14,8 +15,47 @@ Import("env")
 platform = env.PioPlatform()
 progname = env.get("PROGNAME")
 lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
+manifest_ran = False
+
+def infer_architecture(board_cfg):
+    try:
+        mcu = board_cfg.get("build.mcu") if board_cfg else None
+    except KeyError:
+        mcu = None
+    except Exception:
+        mcu = None
+    if not mcu:
+        return None
+    mcu_l = str(mcu).lower()
+    if "esp32s3" in mcu_l:
+        return "esp32-s3"
+    if "esp32c6" in mcu_l:
+        return "esp32-c6"
+    if "esp32c3" in mcu_l:
+        return "esp32-c3"
+    if "esp32" in mcu_l:
+        return "esp32"
+    if "rp2040" in mcu_l:
+        return "rp2040"
+    if "rp2350" in mcu_l:
+        return "rp2350"
+    if "nrf52" in mcu_l or "nrf52840" in mcu_l:
+        return "nrf52840"
+    if "stm32" in mcu_l:
+        return "stm32"
+    return None
 
 def manifest_gather(source, target, env):
+    global manifest_ran
+    if manifest_ran:
+        return
+    # Skip manifest generation if we cannot determine architecture (host/native builds)
+    board_arch = infer_architecture(env.BoardConfig())
+    if not board_arch:
+        print(f"Skipping mtjson generation for unknown architecture (env={env.get('PIOENV')})")
+        manifest_ran = True
+        return
+    manifest_ran = True
     out = []
     board_platform = env.BoardConfig().get("platform")
     needs_ota_suffix = board_platform == "nordicnrf52"
@@ -47,14 +87,39 @@ def manifest_gather(source, target, env):
     manifest_write(out, env)
 
 def manifest_write(files, env):
+    # Defensive: also skip manifest writing if we cannot determine architecture
+    def get_project_option(name):
+        try:
+            return env.GetProjectOption(name)
+        except Exception:
+            return None
+
+    def get_project_option_any(names):
+        for name in names:
+            val = get_project_option(name)
+            if val is not None:
+                return val
+        return None
+
+    def as_bool(val):
+        return str(val).strip().lower() in ("1", "true", "yes", "on")
+
+    def as_int(val):
+        try:
+            return int(str(val), 10)
+        except (TypeError, ValueError):
+            return None
+
+    def as_list(val):
+        return [item.strip() for item in str(val).split(",") if item.strip()]
+
     manifest = {
         "version": verObj["long"],
         "build_epoch": build_epoch,
-        "board": env.get("PIOENV"),
+        "platformioTarget": env.get("PIOENV"),
         "mcu": env.get("BOARD_MCU"),
         "repo": repo_owner,
         "files": files,
-        "part": None,
         "has_mui": False,
         "has_inkhud": False,
     }
@@ -69,6 +134,51 @@ def manifest_write(files, env):
     if "MESHTASTIC_INCLUDE_INKHUD" in env.get("CPPDEFINES", []):
         manifest["has_inkhud"] = True
 
+    pioenv = env.get("PIOENV")
+    device_meta = {}
+    device_meta_fields = [
+        ("hwModel", ["custom_meshtastic_hw_model"], as_int),
+        ("hwModelSlug", ["custom_meshtastic_hw_model_slug"], str),
+        ("architecture", ["custom_meshtastic_architecture"], str),
+        ("activelySupported", ["custom_meshtastic_actively_supported"], as_bool),
+        ("displayName", ["custom_meshtastic_display_name"], str),
+        ("supportLevel", ["custom_meshtastic_support_level"], as_int),
+        ("images", ["custom_meshtastic_images"], as_list),
+        ("tags", ["custom_meshtastic_tags"], as_list),
+        ("requiresDfu", ["custom_meshtastic_requires_dfu"], as_bool),
+        ("partitionScheme", ["custom_meshtastic_partition_scheme"], str),
+        ("url", ["custom_meshtastic_url"], str),
+        ("key", ["custom_meshtastic_key"], str),
+        ("variant", ["custom_meshtastic_variant"], str),
+    ]
+
+
+    for manifest_key, option_keys, caster in device_meta_fields:
+        raw_val = get_project_option_any(option_keys)
+        if raw_val is None:
+            continue
+        parsed = caster(raw_val) if callable(caster) else raw_val
+        if parsed is not None and parsed != "":
+            device_meta[manifest_key] = parsed
+
+    # Determine architecture once; if we can't infer it, skip manifest generation
+    board_arch = device_meta.get("architecture") or infer_architecture(env.BoardConfig())
+    if not board_arch:
+        print(f"Skipping mtjson write for unknown architecture (env={env.get('PIOENV')})")
+        return
+
+    device_meta["architecture"] = board_arch
+
+    # Always set requiresDfu: true for nrf52840 targets
+    if board_arch == "nrf52840":
+        device_meta["requiresDfu"] = True
+
+    device_meta.setdefault("displayName", pioenv)
+    device_meta.setdefault("activelySupported", False)
+
+    if device_meta:
+        manifest.update(device_meta)
+
     # Write the manifest to the build directory
     with open(env.subst("$BUILD_DIR/${PROGNAME}.mt.json"), "w") as f:
         json.dump(manifest, f, indent=2)
@@ -166,8 +276,12 @@ def load_boot_logo(source, target, env):
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
     env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
 
-mtjson_deps = ["buildprog"]
-if platform.name == "espressif32":
+board_arch = infer_architecture(env.BoardConfig())
+should_skip_manifest = board_arch is None
+
+# For host/native envs, avoid depending on 'buildprog' (some targets don't define it)
+mtjson_deps = [] if should_skip_manifest else ["buildprog"]
+if not should_skip_manifest and platform.name == "espressif32":
     # Build littlefs image as part of mtjson target
     # Equivalent to `pio run -t buildfs`
     target_lfs = env.DataToBin(
@@ -175,11 +289,27 @@ if platform.name == "espressif32":
     )
     mtjson_deps.append(target_lfs)
 
-env.AddCustomTarget(
-    name="mtjson",
-    dependencies=mtjson_deps,
-    actions=[manifest_gather],
-    title="Meshtastic Manifest",
-    description="Generating Meshtastic manifest JSON + Checksums",
-    always_build=False,
-)
+if should_skip_manifest:
+    def skip_manifest(source, target, env):
+        print(f"mtjson: skipped for native environment: {env.get('PIOENV')}")
+
+    env.AddCustomTarget(
+        name="mtjson",
+        dependencies=mtjson_deps,
+        actions=[skip_manifest],
+        title="Meshtastic Manifest (skipped)",
+        description="mtjson generation is skipped for native environments",
+        always_build=True,
+    )
+else:
+    env.AddCustomTarget(
+        name="mtjson",
+        dependencies=mtjson_deps,
+        actions=[manifest_gather],
+        title="Meshtastic Manifest",
+        description="Generating Meshtastic manifest JSON + Checksums",
+        always_build=True,
+    )
+
+    # Run manifest generation as part of the default build pipeline for non-native builds.
+    env.Default("mtjson")

bin/readprops.py

@@ -18,8 +18,9 @@ def readProps(prefsLoc):
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
+        # Pin abbreviation length to keep local builds and CI matching (avoid auto-shortening)
         sha = (
-            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
+            subprocess.check_output(["git", "rev-parse", "--short=7", "HEAD"])
             .decode("utf-8")
             .strip()
         )

boards/t-beam-1w.json

@@ -0,0 +1,50 @@
+{
+    "build": {
+        "arduino": {
+            "ldscript": "esp32s3_out.ld",
+            "memory_type": "qio_opi"
+        },
+        "core": "esp32",
+        "extra_flags": [
+            "-DBOARD_HAS_PSRAM",
+            "-DLILYGO_TBEAM_1W",
+            "-DARDUINO_USB_CDC_ON_BOOT=1",
+            "-DARDUINO_USB_MODE=0",
+            "-DARDUINO_RUNNING_CORE=1",
+            "-DARDUINO_EVENT_RUNNING_CORE=1"
+        ],
+        "f_cpu": "240000000L",
+        "f_flash": "80000000L",
+        "flash_mode": "qio",
+        "psram_type": "opi",
+        "hwids": [
+            [
+                "0x303A",
+                "0x1001"
+            ]
+        ],
+        "mcu": "esp32s3",
+        "variant": "t-beam-1w"
+    },
+    "connectivity": [
+        "wifi",
+        "bluetooth",
+        "lora"
+    ],
+    "debug": {
+        "openocd_target": "esp32s3.cfg"
+    },
+    "frameworks": [
+        "arduino"
+    ],
+    "name": "LilyGo TBeam-1W",
+    "upload": {
+        "flash_size": "16MB",
+        "maximum_ram_size": 327680,
+        "maximum_size": 16777216,
+        "require_upload_port": true,
+        "speed": 921600
+    },
+    "url": "http://www.lilygo.cn/",
+    "vendor": "LilyGo"
+}

debian/changelog

@@ -1,3 +1,9 @@
+meshtasticd (2.7.18.0) unstable; urgency=medium
+
+  * Version 2.7.18
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 02 Jan 2026 12:45:36 +0000
+
 meshtasticd (2.7.17.0) unstable; urgency=medium
 
   * Version 2.7.17

platformio.ini

@@ -119,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/862ed040c4ab44f0dfbbe492691f144886102588.zip
+	https://github.com/meshtastic/device-ui/archive/a8e2f947f7abaf0c5ac8e6dd189a22156335beaa.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/DebugConfiguration.h

@@ -13,6 +13,11 @@ extern MemGet memGet;
 #define LED_STATE_ON 1
 #endif
 
+// WIFI LED
+#ifndef WIFI_STATE_ON
+#define WIFI_STATE_ON 1
+#endif
+
 // -----------------------------------------------------------------------------
 // DEBUG
 // -----------------------------------------------------------------------------
@@ -147,7 +152,9 @@ extern "C" void logLegacy(const char *level, const char *fmt, ...);
 // Default Bluetooth PIN
 #define defaultBLEPin 123456
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && defined(USE_CH390D)
+#include <ESP32_CH390.h>
+#elif HAS_ETHERNET && !defined(USE_WS5500)
 #include <RAK13800_W5100S.h>
 #endif // HAS_ETHERNET
 

src/buzz/BuzzerFeedbackThread.cpp

@@ -24,6 +24,9 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
     switch (event->inputEvent) {
     case INPUT_BROKER_USER_PRESS:
     case INPUT_BROKER_ALT_PRESS:
+        playClick(); // Low delay feedback
+        break;
+
     case INPUT_BROKER_SELECT:
     case INPUT_BROKER_SELECT_LONG:
         playBeep(); // Confirmation feedback
@@ -58,4 +61,4 @@ int BuzzerFeedbackThread::handleInputEvent(const InputEvent *event)
     }
 
     return 0; // Allow other handlers to process the event
-}
+}

src/buzz/buzz.cpp

@@ -113,7 +113,14 @@ void playShutdownMelody()
 void playChirp()
 {
     // A short, friendly "chirp" sound for key presses
-    ToneDuration melody[] = {{NOTE_AS3, 20}}; // Very short AS3 note
+    ToneDuration melody[] = {{NOTE_AS3, 20}}; // Short AS3 note
+    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
+}
+
+void playClick()
+{
+    // A very short "click" sound with minimum delay; ideal for rotary encoder events
+    ToneDuration melody[] = {{NOTE_AS3, 1}}; // Very Short AS3
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 

src/buzz/buzz.h

@@ -9,6 +9,7 @@ void playGPSDisableBeep();
 void playComboTune();
 void playBoop();
 void playChirp();
+void playClick();
 void playLongPressLeadUp();
 bool playNextLeadUpNote();  // Play the next note in the lead-up sequence
 void resetLeadUpSequence(); // Reset the lead-up sequence to start from beginning

src/configuration.h

@@ -444,6 +444,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #endif
 
+// BME680 BSEC2 support detection
+#if !defined(MESHTASTIC_BME680_BSEC2_SUPPORTED)
+#if defined(RAK_4631) || defined(TBEAM_V10)
+
+#define MESHTASTIC_BME680_BSEC2_SUPPORTED 1
+#define MESHTASTIC_BME680_HEADER <bsec2.h>
+#else
+#define MESHTASTIC_BME680_BSEC2_SUPPORTED 0
+#define MESHTASTIC_BME680_HEADER <Adafruit_BME680.h>
+#endif // defined(RAK_4631)
+#endif // !defined(MESHTASTIC_BME680_BSEC2_SUPPORTED)
+
 // -----------------------------------------------------------------------------
 // Global switches to turn off features for a minimized build
 // -----------------------------------------------------------------------------

src/detect/ScanI2CTwoWire.cpp

@@ -487,7 +487,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
             case TSL25911_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xA0 | 0x12), 1);
                 if (registerValue == 0x50) {
                     type = TSL2591;
                     logFoundDevice("TSL25911", (uint8_t)addr.address);

src/graphics/draw/MenuHandler.h

@@ -128,7 +128,28 @@ template <typename T> struct MenuOption {
     MenuOption(const char *labelIn, OptionsAction actionIn) : label(labelIn), action(actionIn), hasValue(false), value() {}
 };
 
+struct ScreenColor {
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
+    bool useVariant;
+
+    ScreenColor(uint8_t rIn = 0, uint8_t gIn = 0, uint8_t bIn = 0, bool variantIn = false)
+        : r(rIn), g(gIn), b(bIn), useVariant(variantIn)
+    {
+    }
+};
+
 using RadioPresetOption = MenuOption<meshtastic_Config_LoRaConfig_ModemPreset>;
+using LoraRegionOption = MenuOption<meshtastic_Config_LoRaConfig_RegionCode>;
+using TimezoneOption = MenuOption<const char *>;
+using CompassOption = MenuOption<meshtastic_CompassMode>;
+using ScreenColorOption = MenuOption<ScreenColor>;
+using GPSToggleOption = MenuOption<meshtastic_Config_PositionConfig_GpsMode>;
+using GPSFormatOption = MenuOption<meshtastic_DeviceUIConfig_GpsCoordinateFormat>;
+using NodeNameOption = MenuOption<bool>;
+using PositionMenuOption = MenuOption<int>;
+using ClockFaceOption = MenuOption<bool>;
 
 } // namespace graphics
 #endif

src/main.cpp

@@ -330,7 +330,7 @@ void setup()
 
 #ifdef WIFI_LED
     pinMode(WIFI_LED, OUTPUT);
-    digitalWrite(WIFI_LED, LOW);
+    digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
 
 #ifdef BLE_LED

src/mesh/FloodingRouter.cpp

@@ -4,6 +4,7 @@
 #include "configuration.h"
 #include "mesh-pb-constants.h"
 #include "meshUtils.h"
+#include "modules/TextMessageModule.h"
 #if !MESHTASTIC_EXCLUDE_TRACEROUTE
 #include "modules/TraceRouteModule.h"
 #endif
@@ -35,6 +36,10 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
         return true; // we handled it, so stop processing
     }
 
+    if (!seenRecently && !wasUpgraded && textMessageModule) {
+        seenRecently = textMessageModule->recentlySeen(p->id);
+    }
+
     if (seenRecently) {
         printPacket("Ignore dupe incoming msg", p);
         rxDupe++;

src/mesh/InterfacesTemplates.cpp

@@ -25,7 +25,7 @@ template class LR11x0Interface<LR1121>;
 template class SX126xInterface<STM32WLx>;
 #endif
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 #include "api/ethServerAPI.h"
 template class ServerAPI<EthernetClient>;
 template class APIServerPort<ethServerAPI, EthernetServer>;

src/mesh/RadioInterface.cpp

@@ -246,7 +246,8 @@ uint32_t RadioInterface::getPacketTime(const meshtastic_MeshPacket *p, bool rece
 /** The delay to use for retransmitting dropped packets */
 uint32_t RadioInterface::getRetransmissionMsec(const meshtastic_MeshPacket *p)
 {
-    size_t numbytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded);
+    size_t numbytes =p->which_payload_variant == meshtastic_MeshPacket_decoded_tag ? 
+      pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_Data_msg, &p->decoded) : p->encrypted.size+MESHTASTIC_HEADER_LENGTH;
     uint32_t packetAirtime = getPacketTime(numbytes + sizeof(PacketHeader));
     // Make sure enough time has elapsed for this packet to be sent and an ACK is received.
     // LOG_DEBUG("Waiting for flooding message with airtime %d and slotTime is %d", packetAirtime, slotTimeMsec);
@@ -520,6 +521,10 @@ void RadioInterface::applyModemConfig()
                 sf = 12;
                 break;
             }
+            if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
+                cr = loraConfig.coding_rate;
+                LOG_INFO("Using custom Coding Rate %u", cr);
+            }
         } else {
             sf = loraConfig.spread_factor;
             cr = loraConfig.coding_rate;

src/mesh/Router.cpp

@@ -113,7 +113,7 @@ bool Router::shouldDecrementHopLimit(const meshtastic_MeshPacket *p)
 
         // Check 3: role check (moderate cost - multiple comparisons)
         if (!IS_ONE_OF(node->user.role, meshtastic_Config_DeviceConfig_Role_ROUTER,
-                       meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)) {
+                       meshtastic_Config_DeviceConfig_Role_ROUTER_LATE, meshtastic_Config_DeviceConfig_Role_CLIENT_BASE)) {
             continue;
         }
 
@@ -745,15 +745,19 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src)
         MeshModule::callModules(*p, src);
 
 #if !MESHTASTIC_EXCLUDE_MQTT
-        // Mark as pki_encrypted if it is not yet decoded and MQTT encryption is also enabled, hash matches and it's a DM not to
-        // us (because we would be able to decrypt it)
-        if (decodedState == DecodeState::DECODE_FAILURE && moduleConfig.mqtt.encryption_enabled && p->channel == 0x00 &&
-            !isBroadcast(p->to) && !isToUs(p))
-            p_encrypted->pki_encrypted = true;
-        // After potentially altering it, publish received message to MQTT if we're not the original transmitter of the packet
-        if ((decodedState == DecodeState::DECODE_SUCCESS || p_encrypted->pki_encrypted) && moduleConfig.mqtt.enabled &&
-            !isFromUs(p) && mqtt)
-            mqtt->onSend(*p_encrypted, *p, p->channel);
+        if (p_encrypted == nullptr) {
+            LOG_WARN("p_encrypted is null, skipping MQTT publish");
+        } else {
+            // Mark as pki_encrypted if it is not yet decoded and MQTT encryption is also enabled, hash matches and it's a DM not
+            // to us (because we would be able to decrypt it)
+            if (decodedState == DecodeState::DECODE_FAILURE && moduleConfig.mqtt.encryption_enabled && p->channel == 0x00 &&
+                !isBroadcast(p->to) && !isToUs(p))
+                p_encrypted->pki_encrypted = true;
+            // After potentially altering it, publish received message to MQTT if we're not the original transmitter of the packet
+            if ((decodedState == DecodeState::DECODE_SUCCESS || p_encrypted->pki_encrypted) && moduleConfig.mqtt.enabled &&
+                !isFromUs(p) && mqtt)
+                mqtt->onSend(*p_encrypted, *p, p->channel);
+        }
 #endif
     }
 

src/mesh/SX126xInterface.cpp

@@ -62,6 +62,11 @@ template <typename T> bool SX126xInterface<T>::init()
     digitalWrite(LORA_PA_TX_EN, LOW);
 #endif
 
+#ifdef RF95_FAN_EN
+    digitalWrite(RF95_FAN_EN, HIGH);
+    pinMode(RF95_FAN_EN, OUTPUT);
+#endif
+
 #if ARCH_PORTDUINO
     tcxoVoltage = (float)portduino_config.dio3_tcxo_voltage / 1000;
     if (portduino_config.lora_sx126x_ant_sw_pin.pin != RADIOLIB_NC) {
@@ -85,6 +90,13 @@ template <typename T> bool SX126xInterface<T>::init()
         power = -9;
 
     int res = lora.begin(getFreq(), bw, sf, cr, syncWord, power, preambleLength, tcxoVoltage, useRegulatorLDO);
+
+#ifdef SX126X_PA_RAMP_US
+    // Set custom PA ramp time for boards requiring longer stabilization (e.g., T-Beam 1W needs >800us)
+    if (res == RADIOLIB_ERR_NONE) {
+        lora.setPaRampTime(SX126X_PA_RAMP_US);
+    }
+#endif
     // \todo Display actual typename of the adapter, not just `SX126x`
     LOG_INFO("SX126x init result %d", res);
     if (res == RADIOLIB_ERR_CHIP_NOT_FOUND || res == RADIOLIB_ERR_SPI_CMD_FAILED)

src/mesh/api/ethServerAPI.cpp

@@ -1,7 +1,7 @@
 #include "configuration.h"
 #include <Arduino.h>
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 
 #include "ethServerAPI.h"
 

src/mesh/api/ethServerAPI.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #include "ServerAPI.h"
-#ifndef USE_WS5500
+#if !defined(USE_WS5500) && !defined(USE_CH390D)
 #include <RAK13800_W5100S.h>
 
 /**

src/mesh/wifi/WiFiAPClient.cpp

@@ -384,13 +384,13 @@ static void WiFiEvent(WiFiEvent_t event)
 #endif
         }
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, HIGH);
+        digitalWrite(WIFI_LED, LOW ^ WIFI_STATE_ON);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
         LOG_INFO("Disconnected from WiFi access point");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, LOW);
+        digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
         if (!isReconnecting) {
             WiFi.disconnect(false, true);
@@ -442,13 +442,13 @@ static void WiFiEvent(WiFiEvent_t event)
     case ARDUINO_EVENT_WIFI_AP_START:
         LOG_INFO("WiFi access point started");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, HIGH);
+        digitalWrite(WIFI_LED, LOW ^ WIFI_STATE_ON);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STOP:
         LOG_INFO("WiFi access point stopped");
 #ifdef WIFI_LED
-        digitalWrite(WIFI_LED, LOW);
+        digitalWrite(WIFI_LED, HIGH ^ WIFI_STATE_ON);
 #endif
         break;
     case ARDUINO_EVENT_WIFI_AP_STACONNECTED:

src/modules/AdminModule.cpp

@@ -1230,7 +1230,7 @@ void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &r
     }
 #endif
 
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
     conn.has_ethernet = true;
     conn.ethernet.has_status = true;
     if (Ethernet.linkStatus() == LinkON) {

src/modules/SystemCommandsModule.cpp

@@ -45,9 +45,9 @@ int SystemCommandsModule::handleInputEvent(const InputEvent *event)
     // Mute
     case INPUT_BROKER_MSG_MUTE_TOGGLE:
         if (moduleConfig.external_notification.enabled && externalNotificationModule) {
-            externalNotificationModule->setMute(externalNotificationModule->getMute());
+            externalNotificationModule->setMute(!externalNotificationModule->getMute());
             IF_SCREEN(if (!externalNotificationModule->getMute()) externalNotificationModule->stopNow(); screen->showSimpleBanner(
-                externalNotificationModule->getMute() ? "Notifications\nEnabled" : "Notifications\nDisabled", 3000);)
+                externalNotificationModule->getMute() ? "Notifications\nDisabled" : "Notifications\nEnabled", 3000);)
         }
         return 0;
     // Bluetooth

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -53,7 +53,7 @@ extern void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const c
 #include "Sensor/LTR390UVSensor.h"
 #endif
 
-#if __has_include(<bsec2.h>)
+#if __has_include(MESHTASTIC_BME680_HEADER)
 #include "Sensor/BME680Sensor.h"
 #endif
 
@@ -214,7 +214,7 @@ void EnvironmentTelemetryModule::i2cScanFinished(ScanI2C *i2cScanner)
 #if __has_include(<Adafruit_LTR390.h>)
     addSensor<LTR390UVSensor>(i2cScanner, ScanI2C::DeviceType::LTR390UV);
 #endif
-#if __has_include(<bsec2.h>)
+#if __has_include(MESHTASTIC_BME680_HEADER)
     addSensor<BME680Sensor>(i2cScanner, ScanI2C::DeviceType::BME_680);
 #endif
 #if __has_include(<Adafruit_BMP280.h>)

src/modules/Telemetry/HealthTelemetry.cpp

@@ -136,12 +136,12 @@ void HealthTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *
     display->drawString(x, y += _fontHeight(FONT_SMALL), tempStr);
     if (lastMeasurement.variant.health_metrics.has_heart_bpm) {
         char heartStr[32];
-        snprintf(heartStr, sizeof(heartStr), "Heart Rate: %.0f bpm", lastMeasurement.variant.health_metrics.heart_bpm);
+        snprintf(heartStr, sizeof(heartStr), "Heart Rate: %u bpm", lastMeasurement.variant.health_metrics.heart_bpm);
         display->drawString(x, y += _fontHeight(FONT_SMALL), heartStr);
     }
     if (lastMeasurement.variant.health_metrics.has_spO2) {
         char spo2Str[32];
-        snprintf(spo2Str, sizeof(spo2Str), "spO2: %.0f %%", lastMeasurement.variant.health_metrics.spO2);
+        snprintf(spo2Str, sizeof(spo2Str), "spO2: %u %%", lastMeasurement.variant.health_metrics.spO2);
         display->drawString(x, y += _fontHeight(FONT_SMALL), spo2Str);
     }
 }

src/modules/Telemetry/Sensor/BME680Sensor.cpp

@@ -1,6 +1,6 @@
 #include "configuration.h"
 
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<bsec2.h>)
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(MESHTASTIC_BME680_HEADER)
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "BME680Sensor.h"
@@ -10,6 +10,7 @@
 
 BME680Sensor::BME680Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_BME680, "BME680") {}
 
+#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
 int32_t BME680Sensor::runOnce()
 {
     if (!bme680.run()) {
@@ -17,10 +18,13 @@ int32_t BME680Sensor::runOnce()
     }
     return 35;
 }
+#endif // defined(MESHTASTIC_BME680_BSEC2_SUPPORTED)
 
 bool BME680Sensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev)
 {
     status = 0;
+
+#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     if (!bme680.begin(dev->address.address, *bus))
         checkStatus("begin");
 
@@ -42,12 +46,25 @@ bool BME680Sensor::initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev)
     if (status == 0)
         LOG_DEBUG("BME680Sensor::runOnce: bme680.status %d", bme680.status);
 
+#else
+    bme680 = makeBME680(bus);
+
+    if (!bme680->begin(dev->address.address)) {
+        LOG_ERROR("Init sensor: %s failed at begin()", sensorName);
+        return status;
+    }
+
+    status = 1;
+
+#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
+
     initI2CSensor();
     return status;
 }
 
 bool BME680Sensor::getMetrics(meshtastic_Telemetry *measurement)
 {
+#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     if (bme680.getData(BSEC_OUTPUT_RAW_PRESSURE).signal == 0)
         return false;
 
@@ -65,9 +82,27 @@ bool BME680Sensor::getMetrics(meshtastic_Telemetry *measurement)
     // Check if we need to save state to filesystem (every STATE_SAVE_PERIOD ms)
     measurement->variant.environment_metrics.iaq = bme680.getData(BSEC_OUTPUT_IAQ).signal;
     updateState();
+#else
+    if (!bme680->performReading()) {
+        LOG_ERROR("BME680Sensor::getMetrics: performReading failed");
+        return false;
+    }
+
+    measurement->variant.environment_metrics.has_temperature = true;
+    measurement->variant.environment_metrics.has_relative_humidity = true;
+    measurement->variant.environment_metrics.has_barometric_pressure = true;
+    measurement->variant.environment_metrics.has_gas_resistance = true;
+
+    measurement->variant.environment_metrics.temperature = bme680->readTemperature();
+    measurement->variant.environment_metrics.relative_humidity = bme680->readHumidity();
+    measurement->variant.environment_metrics.barometric_pressure = bme680->readPressure() / 100.0F;
+    measurement->variant.environment_metrics.gas_resistance = bme680->readGas() / 1000.0;
+
+#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
     return true;
 }
 
+#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
 void BME680Sensor::loadState()
 {
 #ifdef FSCom
@@ -144,5 +179,6 @@ void BME680Sensor::checkStatus(const char *functionName)
     else if (bme680.sensor.status > BME68X_OK)
         LOG_WARN("%s BME68X code: %d", functionName, bme680.sensor.status);
 }
+#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
 
 #endif

src/modules/Telemetry/Sensor/BME680Sensor.h

@@ -1,23 +1,40 @@
 #include "configuration.h"
 
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<bsec2.h>)
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(MESHTASTIC_BME680_HEADER)
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "TelemetrySensor.h"
+
+#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
+#include <bme68xLibrary.h>
 #include <bsec2.h>
+#else
+#include <Adafruit_BME680.h>
+#include <memory>
+#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
 
 #define STATE_SAVE_PERIOD UINT32_C(360 * 60 * 1000) // That's 6 hours worth of millis()
 
+#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
 const uint8_t bsec_config[] = {
 #include "config/bme680/bme680_iaq_33v_3s_4d/bsec_iaq.txt"
 };
-
+#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
 class BME680Sensor : public TelemetrySensor
 {
   private:
+#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     Bsec2 bme680;
+#else
+    using BME680Ptr = std::unique_ptr<Adafruit_BME680>;
+
+    static BME680Ptr makeBME680(TwoWire *bus) { return std::make_unique<Adafruit_BME680>(bus); }
+
+    BME680Ptr bme680;
+#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
 
   protected:
+#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     const char *bsecConfigFileName = "/prefs/bsec.dat";
     uint8_t bsecState[BSEC_MAX_STATE_BLOB_SIZE] = {0};
     uint8_t accuracy = 0;
@@ -34,10 +51,13 @@ class BME680Sensor : public TelemetrySensor
     void loadState();
     void updateState();
     void checkStatus(const char *functionName);
+#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
 
   public:
     BME680Sensor();
+#if MESHTASTIC_BME680_BSEC2_SUPPORTED == 1
     virtual int32_t runOnce() override;
+#endif // MESHTASTIC_BME680_BSEC2_SUPPORTED
     virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
     virtual bool initDevice(TwoWire *bus, ScanI2C::FoundDevice *dev) override;
 };

src/modules/TextMessageModule.cpp

@@ -17,6 +17,9 @@ ProcessMessage TextMessageModule::handleReceived(const meshtastic_MeshPacket &mp
     auto &p = mp.decoded;
     LOG_INFO("Received text msg from=0x%0x, id=0x%x, msg=%.*s", mp.from, mp.id, p.payload.size, p.payload.bytes);
 #endif
+    // add packet ID to the rolling list of packets
+    textPacketList[textPacketListIndex] = mp.id;
+    textPacketListIndex = (textPacketListIndex + 1) % TEXT_PACKET_LIST_SIZE;
 
     // We only store/display messages destined for us.
     devicestate.rx_text_message = mp;
@@ -47,3 +50,13 @@ bool TextMessageModule::wantPacket(const meshtastic_MeshPacket *p)
 {
     return MeshService::isTextPayload(p);
 }
+
+bool TextMessageModule::recentlySeen(uint32_t id)
+{
+    for (size_t i = 0; i < TEXT_PACKET_LIST_SIZE; i++) {
+        if (textPacketList[i] != 0 && textPacketList[i] == id) {
+            return true;
+        }
+    }
+    return false;
+}

src/modules/TextMessageModule.h

@@ -1,6 +1,7 @@
 #pragma once
 #include "Observer.h"
 #include "SinglePortModule.h"
+#define TEXT_PACKET_LIST_SIZE 50
 
 /**
  * Text message handling for Meshtastic.
@@ -19,6 +20,8 @@ class TextMessageModule : public SinglePortModule, public Observable<const mesht
      */
     TextMessageModule() : SinglePortModule("text", meshtastic_PortNum_TEXT_MESSAGE_APP) {}
 
+    bool recentlySeen(uint32_t id);
+
   protected:
     /** Called to handle a particular incoming message
      *
@@ -27,6 +30,10 @@ class TextMessageModule : public SinglePortModule, public Observable<const mesht
      */
     virtual ProcessMessage handleReceived(const meshtastic_MeshPacket &mp) override;
     virtual bool wantPacket(const meshtastic_MeshPacket *p) override;
+
+  private:
+    uint32_t textPacketList[TEXT_PACKET_LIST_SIZE] = {0};
+    size_t textPacketListIndex = 0;
 };
 
 extern TextMessageModule *textMessageModule;

src/mqtt/MQTT.h

@@ -15,7 +15,7 @@
 #include <WiFiClientSecure.h>
 #endif
 #endif
-#if HAS_ETHERNET && !defined(USE_WS5500)
+#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
 #include <EthernetClient.h>
 #endif
 

src/nimble/NimbleBluetooth.cpp

@@ -14,11 +14,11 @@
 #include <atomic>
 #include <mutex>
 
+#ifdef NIMBLE_TWO
 #include "NimBLEAdvertising.h"
-#ifdef CONFIG_BT_NIMBLE_EXT_ADV
 #include "NimBLEExtAdvertising.h"
-#endif
 #include "PowerStatus.h"
+#endif
 
 #if defined(CONFIG_NIMBLE_CPP_IDF)
 #include "host/ble_gap.h"
@@ -26,12 +26,15 @@
 #include "nimble/nimble/host/include/host/ble_gap.h"
 #endif
 
+#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
+
 namespace
 {
 constexpr uint16_t kPreferredBleMtu = 517;
 constexpr uint16_t kPreferredBleTxOctets = 251;
 constexpr uint16_t kPreferredBleTxTimeUs = (kPreferredBleTxOctets + 14) * 8;
 } // namespace
+#endif
 
 // Debugging options: careful, they slow things down quite a bit!
 // #define DEBUG_NIMBLE_ON_READ_TIMING  // uncomment to time onRead duration
@@ -310,9 +313,11 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
     {
         PhoneAPI::onNowHasData(fromRadioNum);
 
-#ifdef DEBUG_NIMBLE_NOTIFY
         int currentNotifyCount = notifyCount.fetch_add(1);
+
         uint8_t cc = bleServer->getConnectedCount();
+
+#ifdef DEBUG_NIMBLE_NOTIFY
         // This logging slows things down when there are lots of packets going to the phone, like initial connection:
         LOG_DEBUG("BLE notify(%d) fromNum: %d connections: %d", currentNotifyCount, fromRadioNum, cc);
 #endif
@@ -321,7 +326,13 @@ class BluetoothPhoneAPI : public PhoneAPI, public concurrency::OSThread
         put_le32(val, fromRadioNum);
 
         fromNumCharacteristic->setValue(val, sizeof(val));
+#ifdef NIMBLE_TWO
+        // NOTE: I don't have any NIMBLE_TWO devices, but this line makes me suspicious, and I suspect it needs to just be
+        // notify().
         fromNumCharacteristic->notify(val, sizeof(val), BLE_HS_CONN_HANDLE_NONE);
+#else
+        fromNumCharacteristic->notify();
+#endif
     }
 
     /// Check the current underlying physical link to see if the client is currently connected
@@ -386,7 +397,12 @@ static uint8_t lastToRadio[MAX_TO_FROM_RADIO_SIZE];
 
 class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
 {
-    void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &) override
+#ifdef NIMBLE_TWO
+    virtual void onWrite(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
+#else
+    virtual void onWrite(NimBLECharacteristic *pCharacteristic)
+
+#endif
     {
         // CAUTION: This callback runs in the NimBLE task!!! Don't do anything except communicate with the main task's runOnce.
         // Assumption: onWrite is serialized by NimBLE, so we don't need to lock here against multiple concurrent onWrite calls.
@@ -433,7 +449,11 @@ class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
 
 class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks
 {
-    void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &) override
+#ifdef NIMBLE_TWO
+    virtual void onRead(NimBLECharacteristic *pCharacteristic, NimBLEConnInfo &connInfo)
+#else
+    virtual void onRead(NimBLECharacteristic *pCharacteristic)
+#endif
     {
         // CAUTION: This callback runs in the NimBLE task!!! Don't do anything except communicate with the main task's runOnce.
 
@@ -541,27 +561,32 @@ class NimbleBluetoothFromRadioCallback : public NimBLECharacteristicCallbacks
 
 class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
 {
+#ifdef NIMBLE_TWO
   public:
-    explicit NimbleBluetoothServerCallback(NimbleBluetooth *ble) : ble(ble) {}
+    NimbleBluetoothServerCallback(NimbleBluetooth *ble) { this->ble = ble; }
 
   private:
     NimbleBluetooth *ble;
 
-    uint32_t onPassKeyDisplay() override
+    virtual uint32_t onPassKeyDisplay()
+#else
+    virtual uint32_t onPassKeyRequest()
+#endif
     {
         uint32_t passkey = config.bluetooth.fixed_pin;
 
         if (config.bluetooth.mode == meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN) {
             LOG_INFO("Use random passkey");
+            // This is the passkey to be entered on peer - we pick a number >100,000 to ensure 6 digits
             passkey = random(100000, 999999);
         }
-        LOG_INFO("*** Enter passkey %06u on the peer side ***", passkey);
+        LOG_INFO("*** Enter passkey %d on the peer side ***", passkey);
 
         powerFSM.trigger(EVENT_BLUETOOTH_PAIR);
         meshtastic::BluetoothStatus newStatus(std::to_string(passkey));
         bluetoothStatus->updateStatus(&newStatus);
 
-#if HAS_SCREEN
+#if HAS_SCREEN // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
         if (screen) {
             screen->startAlert([passkey](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
                 char btPIN[16] = "888888";
@@ -590,29 +615,39 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
             });
         }
 #endif
-
         passkeyShowing = true;
+
         return passkey;
     }
 
-    void onAuthenticationComplete(NimBLEConnInfo &connInfo) override
+#ifdef NIMBLE_TWO
+    virtual void onAuthenticationComplete(NimBLEConnInfo &connInfo)
+#else
+    virtual void onAuthenticationComplete(ble_gap_conn_desc *desc)
+#endif
     {
         LOG_INFO("BLE authentication complete");
 
         meshtastic::BluetoothStatus newStatus(meshtastic::BluetoothStatus::ConnectionState::CONNECTED);
         bluetoothStatus->updateStatus(&newStatus);
 
+        // Todo: migrate this display code back into Screen class, and observe bluetoothStatus
         if (passkeyShowing) {
             passkeyShowing = false;
-            if (screen) {
+            if (screen)
                 screen->endAlert();
-            }
         }
 
+        // Store the connection handle for future use
+#ifdef NIMBLE_TWO
         nimbleBluetoothConnHandle = connInfo.getConnHandle();
+#else
+        nimbleBluetoothConnHandle = desc->conn_handle;
+#endif
     }
 
-    void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo) override
+#ifdef NIMBLE_TWO
+    virtual void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo)
     {
         LOG_INFO("BLE incoming connection %s", connInfo.getAddress().toString().c_str());
 
@@ -637,12 +672,21 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
         LOG_INFO("BLE conn %u initial MTU %u (target %u)", connHandle, connInfo.getMTU(), kPreferredBleMtu);
         pServer->updateConnParams(connHandle, 6, 12, 0, 200);
     }
+#endif
 
-    void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason) override
+#ifdef NIMBLE_TWO
+    virtual void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason)
     {
         LOG_INFO("BLE disconnect reason: %d", reason);
+#else
+    virtual void onDisconnect(NimBLEServer *pServer, ble_gap_conn_desc *desc)
+    {
+        LOG_INFO("BLE disconnect");
+#endif
+#ifdef NIMBLE_TWO
         if (ble->isDeInit)
             return;
+#endif
 
         meshtastic::BluetoothStatus newStatus(meshtastic::BluetoothStatus::ConnectionState::DISCONNECTED);
         bluetoothStatus->updateStatus(&newStatus);
@@ -666,69 +710,35 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
             bluetoothPhoneAPI->writeCount = 0;
         }
 
+        // Clear the last ToRadio packet buffer to avoid rejecting first packet from new connection
         memset(lastToRadio, 0, sizeof(lastToRadio));
 
-        nimbleBluetoothConnHandle = BLE_HS_CONN_HANDLE_NONE;
+        nimbleBluetoothConnHandle = BLE_HS_CONN_HANDLE_NONE; // BLE_HS_CONN_HANDLE_NONE means "no connection"
 
+#ifdef NIMBLE_TWO
+        // Restart Advertising
         ble->startAdvertising();
+#else
+        NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+        if (!pAdvertising->start(0)) {
+            if (pAdvertising->isAdvertising()) {
+                LOG_DEBUG("BLE advertising already running");
+            } else {
+                LOG_ERROR("BLE failed to restart advertising");
+            }
+        }
+#endif
     }
 };
 
 static NimbleBluetoothToRadioCallback *toRadioCallbacks;
 static NimbleBluetoothFromRadioCallback *fromRadioCallbacks;
 
-void NimbleBluetooth::startAdvertising()
-{
-#if defined(CONFIG_BT_NIMBLE_EXT_ADV)
-    NimBLEExtAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
-    NimBLEExtAdvertisement legacyAdvertising;
-
-    legacyAdvertising.setLegacyAdvertising(true);
-    legacyAdvertising.setScannable(true);
-    legacyAdvertising.setConnectable(true);
-    legacyAdvertising.setFlags(BLE_HS_ADV_F_DISC_GEN);
-    if (powerStatus->getHasBattery() == 1) {
-        legacyAdvertising.setCompleteServices(NimBLEUUID((uint16_t)0x180f));
-    }
-    legacyAdvertising.setCompleteServices(NimBLEUUID(MESH_SERVICE_UUID));
-    legacyAdvertising.setMinInterval(500);
-    legacyAdvertising.setMaxInterval(1000);
-
-    NimBLEExtAdvertisement legacyScanResponse;
-    legacyScanResponse.setLegacyAdvertising(true);
-    legacyScanResponse.setConnectable(true);
-    legacyScanResponse.setName(getDeviceName());
-
-    if (!pAdvertising->setInstanceData(0, legacyAdvertising)) {
-        LOG_ERROR("BLE failed to set legacyAdvertising");
-    } else if (!pAdvertising->setScanResponseData(0, legacyScanResponse)) {
-        LOG_ERROR("BLE failed to set legacyScanResponse");
-    } else if (!pAdvertising->start(0, 0, 0)) {
-        LOG_ERROR("BLE failed to start legacyAdvertising");
-    }
-#else
-    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
-    pAdvertising->reset();
-    pAdvertising->addServiceUUID(MESH_SERVICE_UUID);
-    if (powerStatus->getHasBattery() == 1) {
-        pAdvertising->addServiceUUID(NimBLEUUID((uint16_t)0x180f));
-    }
-
-    NimBLEAdvertisementData scan;
-    scan.setName(getDeviceName());
-    pAdvertising->setScanResponseData(scan);
-    pAdvertising->enableScanResponse(true);
-
-    if (!pAdvertising->start(0)) {
-        LOG_ERROR("BLE failed to start advertising");
-    }
-#endif
-    LOG_DEBUG("BLE Advertising started");
-}
-
 void NimbleBluetooth::shutdown()
 {
+    // No measurable power saving for ESP32 during light-sleep(?)
 #ifndef ARCH_ESP32
+    // Shutdown bluetooth for minimum power draw
     LOG_INFO("Disable bluetooth");
     NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
     pAdvertising->reset();
@@ -736,6 +746,7 @@ void NimbleBluetooth::shutdown()
 #endif
 }
 
+// Proper shutdown for ESP32. Needs reboot to reverse.
 void NimbleBluetooth::deinit()
 {
 #ifdef ARCH_ESP32
@@ -749,17 +760,21 @@ void NimbleBluetooth::deinit()
     digitalWrite(BLE_LED, LOW);
 #endif
 #endif
+#ifndef NIMBLE_TWO
+    NimBLEDevice::deinit();
+#endif
 #endif
 }
 
+// Has initial setup been completed
 bool NimbleBluetooth::isActive()
 {
-    return bleServer != nullptr;
+    return bleServer;
 }
 
 bool NimbleBluetooth::isConnected()
 {
-    return bleServer && bleServer->getConnectedCount() > 0;
+    return bleServer->getConnectedCount() > 0;
 }
 
 int NimbleBluetooth::getRssi()
@@ -803,7 +818,7 @@ void NimbleBluetooth::setup()
     LOG_INFO("Init the NimBLE bluetooth module");
 
     NimBLEDevice::init(getDeviceName());
-    NimBLEDevice::setPower(9);
+    NimBLEDevice::setPower(ESP_PWR_LVL_P9);
 
 #if NIMBLE_ENABLE_2M_PHY && (defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6))
     int mtuResult = NimBLEDevice::setMTU(kPreferredBleMtu);
@@ -836,7 +851,11 @@ void NimbleBluetooth::setup()
         NimBLEDevice::setSecurityIOCap(BLE_HS_IO_DISPLAY_ONLY);
     }
     bleServer = NimBLEDevice::createServer();
-    auto *serverCallbacks = new NimbleBluetoothServerCallback(this);
+#ifdef NIMBLE_TWO
+    NimbleBluetoothServerCallback *serverCallbacks = new NimbleBluetoothServerCallback(this);
+#else
+    NimbleBluetoothServerCallback *serverCallbacks = new NimbleBluetoothServerCallback();
+#endif
     bleServer->setCallbacks(serverCallbacks, true);
     setupService();
     startAdvertising();
@@ -881,7 +900,11 @@ void NimbleBluetooth::setupService()
     NimBLEService *batteryService = bleServer->createService(NimBLEUUID((uint16_t)0x180f)); // 0x180F is the Battery Service
     BatteryCharacteristic = batteryService->createCharacteristic( // 0x2A19 is the Battery Level characteristic)
         (uint16_t)0x2a19, NIMBLE_PROPERTY::READ | NIMBLE_PROPERTY::NOTIFY, 1);
+#ifdef NIMBLE_TWO
     NimBLE2904 *batteryLevelDescriptor = BatteryCharacteristic->create2904();
+#else
+    NimBLE2904 *batteryLevelDescriptor = (NimBLE2904 *)BatteryCharacteristic->createDescriptor((uint16_t)0x2904);
+#endif
     batteryLevelDescriptor->setFormat(NimBLE2904::FORMAT_UINT8);
     batteryLevelDescriptor->setNamespace(1);
     batteryLevelDescriptor->setUnit(0x27ad);
@@ -889,12 +912,54 @@ void NimbleBluetooth::setupService()
     batteryService->start();
 }
 
+void NimbleBluetooth::startAdvertising()
+{
+#ifdef NIMBLE_TWO
+    NimBLEExtAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+    NimBLEExtAdvertisement legacyAdvertising;
+
+    legacyAdvertising.setLegacyAdvertising(true);
+    legacyAdvertising.setScannable(true);
+    legacyAdvertising.setConnectable(true);
+    legacyAdvertising.setFlags(BLE_HS_ADV_F_DISC_GEN);
+    if (powerStatus->getHasBattery() == 1) {
+        legacyAdvertising.setCompleteServices(NimBLEUUID((uint16_t)0x180f));
+    }
+    legacyAdvertising.setCompleteServices(NimBLEUUID(MESH_SERVICE_UUID));
+    legacyAdvertising.setMinInterval(500);
+    legacyAdvertising.setMaxInterval(1000);
+
+    NimBLEExtAdvertisement legacyScanResponse;
+    legacyScanResponse.setLegacyAdvertising(true);
+    legacyScanResponse.setConnectable(true);
+    legacyScanResponse.setName(getDeviceName());
+
+    if (!pAdvertising->setInstanceData(0, legacyAdvertising)) {
+        LOG_ERROR("BLE failed to set legacyAdvertising");
+    } else if (!pAdvertising->setScanResponseData(0, legacyScanResponse)) {
+        LOG_ERROR("BLE failed to set legacyScanResponse");
+    } else if (!pAdvertising->start(0, 0, 0)) {
+        LOG_ERROR("BLE failed to start legacyAdvertising");
+    }
+#else
+    NimBLEAdvertising *pAdvertising = NimBLEDevice::getAdvertising();
+    pAdvertising->reset();
+    pAdvertising->addServiceUUID(MESH_SERVICE_UUID);
+    pAdvertising->addServiceUUID(NimBLEUUID((uint16_t)0x180f)); // 0x180F is the Battery Service
+    pAdvertising->start(0);
+#endif
+}
+
 /// Given a level between 0-100, update the BLE attribute
 void updateBatteryLevel(uint8_t level)
 {
     if ((config.bluetooth.enabled == true) && bleServer && nimbleBluetooth->isConnected()) {
         BatteryCharacteristic->setValue(&level, 1);
+#ifdef NIMBLE_TWO
         BatteryCharacteristic->notify(&level, 1, BLE_HS_CONN_HANDLE_NONE);
+#else
+        BatteryCharacteristic->notify();
+#endif
     }
 }
 
@@ -909,7 +974,11 @@ void NimbleBluetooth::sendLog(const uint8_t *logMessage, size_t length)
     if (!bleServer || !isConnected() || length > 512) {
         return;
     }
+#ifdef NIMBLE_TWO
     logRadioCharacteristic->notify(logMessage, length, BLE_HS_CONN_HANDLE_NONE);
+#else
+    logRadioCharacteristic->notify(logMessage, length, true);
+#endif
 }
 
 void clearNVS()

src/nimble/NimbleBluetooth.h

@@ -12,11 +12,16 @@ class NimbleBluetooth : BluetoothApi
     bool isConnected();
     int getRssi();
     void sendLog(const uint8_t *logMessage, size_t length);
+#if defined(NIMBLE_TWO)
     void startAdvertising();
+#endif
     bool isDeInit = false;
 
   private:
     void setupService();
+#if !defined(NIMBLE_TWO)
+    void startAdvertising();
+#endif
 };
 
 void setBluetoothEnable(bool enable);

src/platform/portduino/PortduinoGlue.cpp

@@ -366,6 +366,14 @@ void portduinoSetup()
                         cleanupNameForAutoconf("lora-hat-" + std::string(hat_vendor) + "-" + autoconf_product + ".yaml");
                 } else if (found_ch341) {
                     product_config = cleanupNameForAutoconf("lora-usb-" + std::string(autoconf_product) + ".yaml");
+                    // look for more data after the null terminator
+                    size_t len = strlen(autoconf_product);
+                    if (len < 74) {
+                        memcpy(portduino_config.device_id, autoconf_product + len + 1, 16);
+                        if (!memfll(portduino_config.device_id, '\0', 16) && !memfll(portduino_config.device_id, 0xff, 16)) {
+                            portduino_config.has_device_id = true;
+                        }
+                    }
                 }
 
                 // Don't try to automatically find config for a device with RAK eeprom.

src/platform/portduino/USBHal.h

@@ -64,7 +64,7 @@ class Ch341Hal : public RadioLibHal
     void getProductString(char *_product_string, size_t len)
     {
         len = len > 95 ? 95 : len;
-        strncpy(_product_string, pinedio.product_string, len);
+        memcpy(_product_string, pinedio.product_string, len);
     }
 
     void init() override {}

variants/esp32/diy/dr-dev/platformio.ini

@@ -1,5 +1,12 @@
 ; Port to Disaster Radio's ESP32-v3 Dev Board
 [env:meshtastic-dr-dev]
+custom_meshtastic_hw_model = 41
+custom_meshtastic_hw_model_slug = DR_DEV
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = DR-DEV
+custom_meshtastic_tags = DIY
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 board_level = extra

variants/esp32/diy/hydra/platformio.ini

@@ -1,5 +1,13 @@
 ; Hydra - Meshtastic DIY v1 hardware with some specific changes
 [env:hydra]
+custom_meshtastic_hw_model = 39
+custom_meshtastic_hw_model_slug = HYDRA
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Hydra
+custom_meshtastic_tags = DIY
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 build_flags =

variants/esp32/diy/v1/platformio.ini

@@ -1,5 +1,14 @@
 ; Meshtastic DIY v1 by Nano VHF Schematic based on ESP32-WROOM-32 (38 pins) devkit & EBYTE E22 SX1262/SX1268 module
 [env:meshtastic-diy-v1]
+custom_meshtastic_hw_model = 39
+custom_meshtastic_hw_model_slug = DIY_V1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = DIY V1
+custom_meshtastic_images = diy.svg
+custom_meshtastic_tags = DIY
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 board_check = true

variants/esp32/esp32-common.ini

@@ -38,7 +38,6 @@ build_flags =
   -DAXP_DEBUG_PORT=Serial
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
-  -DCONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
   -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
@@ -61,11 +60,11 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
   https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
   # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
-  h2zero/NimBLE-Arduino@2.3.7
+  h2zero/NimBLE-Arduino@^1.4.3
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
-  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
+  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

variants/esp32/esp32.ini

@@ -5,4 +5,4 @@ extends = esp32_common
 custom_esp32_kind = esp32
 
 build_flags =
-  ${esp32_common.build_flags}
+  ${esp32_common.build_flags}

variants/esp32/heltec_v1/platformio.ini

@@ -1,4 +1,11 @@
 [env:heltec-v1]
+custom_meshtastic_hw_model = 11
+custom_meshtastic_hw_model_slug = HELTEC_V1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = Heltec V1
+custom_meshtastic_tags = Heltec
+
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base
 board_level = extra

variants/esp32/heltec_v2.1/platformio.ini

@@ -1,4 +1,11 @@
 [env:heltec-v2_1]
+custom_meshtastic_hw_model = 10
+custom_meshtastic_hw_model_slug = HELTEC_V2_1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = Heltec V2.1
+custom_meshtastic_tags = Heltec
+
 board_level = extra
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base

variants/esp32/heltec_v2/platformio.ini

@@ -1,4 +1,11 @@
 [env:heltec-v2_0]
+custom_meshtastic_hw_model = 5
+custom_meshtastic_hw_model_slug = HELTEC_V2_0
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = Heltec V2.0
+custom_meshtastic_tags = Heltec
+
 ;build_type = debug ; to make it possible to step through our jtag debugger
 board_level = extra
 extends = esp32_base

variants/esp32/m5stack_core/platformio.ini

@@ -1,4 +1,12 @@
 [env:m5stack-core]
+custom_meshtastic_hw_model = 42
+custom_meshtastic_hw_model_slug = M5STACK
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = M5 Stack
+custom_meshtastic_tags = M5Stack
+
 extends = esp32_base
 board = m5stack-core-esp32
 monitor_filters = esp32_exception_decoder

variants/esp32/nano-g1-explorer/platformio.ini

@@ -1,5 +1,13 @@
 ; The 1.0 release of the nano-g1-explorer board 
 [env:nano-g1-explorer]
+custom_meshtastic_hw_model = 17
+custom_meshtastic_hw_model_slug = NANO_G1_EXPLORER
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Nano G1 Explorer
+custom_meshtastic_tags = B&Q
+
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 

variants/esp32/nano-g1/platformio.ini

@@ -1,5 +1,13 @@
 ; The 1.0 release of the nano-g1 board 
 [env:nano-g1]
+custom_meshtastic_hw_model = 14
+custom_meshtastic_hw_model_slug = NANO_G1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Nano G1
+custom_meshtastic_tags = B&Q
+
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 

variants/esp32/radiomaster_900_bandit_nano/platformio.ini

@@ -1,4 +1,12 @@
 [env:radiomaster_900_bandit_nano]
+custom_meshtastic_hw_model = 64
+custom_meshtastic_hw_model_slug = RADIOMASTER_900_BANDIT_NANO
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = RadioMaster 900 Bandit Nano
+custom_meshtastic_tags = RadioMaster
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 build_flags =

variants/esp32/rak11200/platformio.ini

@@ -1,4 +1,13 @@
 [env:rak11200]
+custom_meshtastic_hw_model = 13
+custom_meshtastic_hw_model_slug = RAK11200
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = RAK WisBlock 11200
+custom_meshtastic_images = rak11200.svg
+custom_meshtastic_tags = RAK
+
 extends = esp32_base
 board = wiscore_rak11200
 board_level = pr

variants/esp32/station-g1/platformio.ini

@@ -1,5 +1,13 @@
 ; The 1.0 release of the nano-g1 board 
 [env:station-g1]
+custom_meshtastic_hw_model = 25
+custom_meshtastic_hw_model_slug = STATION_G1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Station G1
+custom_meshtastic_tags = B&Q
+
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 

variants/esp32/tbeam/platformio.ini

@@ -1,8 +1,17 @@
 ; The 1.0 release of the TBEAM board 
 [env:tbeam]
+custom_meshtastic_hw_model = 4
+custom_meshtastic_hw_model_slug = TBEAM
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-Beam
+custom_meshtastic_images = tbeam.svg
+custom_meshtastic_tags = LilyGo
+
 extends = esp32_base
 board = ttgo-t-beam
-board_level = extra
+
 board_check = true
 build_flags = ${esp32_base.build_flags}
   -D TBEAM_V10
@@ -13,7 +22,7 @@ upload_speed = 921600
 
 [env:tbeam-displayshield]
 extends = env:tbeam
-
+board_level = extra
 build_flags =
   ${env:tbeam.build_flags}
   -D USE_ST7796

variants/esp32/tbeam_v07/platformio.ini

@@ -1,5 +1,12 @@
 ; The original TBEAM board without the AXP power chip and a few other changes
 [env:tbeam0_7]
+custom_meshtastic_hw_model = 6
+custom_meshtastic_hw_model_slug = TBEAM_V0P7
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = LILYGO T-Beam V0.7
+custom_meshtastic_tags = LilyGo
+
 board_level = extra
 extends = esp32_base
 board = ttgo-t-beam

variants/esp32/tlora_v1/platformio.ini

@@ -1,4 +1,11 @@
 [env:tlora-v1]
+custom_meshtastic_hw_model = 2
+custom_meshtastic_hw_model_slug = TLORA_V1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = LILYGO T-LoRa V1
+custom_meshtastic_tags = LilyGo
+
 board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1

variants/esp32/tlora_v2/platformio.ini

@@ -1,4 +1,11 @@
 [env:tlora-v2]
+custom_meshtastic_hw_model = 1
+custom_meshtastic_hw_model_slug = TLORA_V2
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = LILYGO T-LoRa V2
+custom_meshtastic_tags = LilyGo
+
 board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1

variants/esp32/tlora_v2_1_16/platformio.ini

@@ -1,4 +1,13 @@
 [env:tlora-v2-1-1_6]
+custom_meshtastic_hw_model = 3
+custom_meshtastic_hw_model_slug = TLORA_V2_1_1P6
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-LoRa V2.1-1.6
+custom_meshtastic_images = tlora-v2-1-1_6.svg
+custom_meshtastic_tags = LilyGo
+
 extends = esp32_base
 board = ttgo-lora32-v21
 board_check = true

variants/esp32/tlora_v2_1_18/platformio.ini

@@ -1,4 +1,13 @@
 [env:tlora-v2-1-1_8]
+custom_meshtastic_hw_model = 15
+custom_meshtastic_hw_model_slug = TLORA_V2_1_1P8
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-LoRa V2.1-1.8
+custom_meshtastic_images = tlora-v2-1-1_8.svg
+custom_meshtastic_tags = LilyGo, 2.4GHz
+
 extends = esp32_base
 board_level = extra
 board = ttgo-lora32-v21

variants/esp32c3/esp32c3.ini

@@ -4,8 +4,3 @@ custom_esp32_kind = esp32c3
 
 monitor_speed = 115200
 monitor_filters = esp32_c3_exception_decoder
-
-build_flags =
-  ${esp32_common.build_flags}
-  -DCONFIG_BT_NIMBLE_EXT_ADV=1
-  -DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2

variants/esp32c3/heltec_esp32c3/platformio.ini

@@ -1,4 +1,13 @@
 [env:heltec-ht62-esp32c3-sx1262]
+custom_meshtastic_hw_model = 53
+custom_meshtastic_hw_model_slug = HELTEC_HT62
+custom_meshtastic_architecture = esp32-c3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec HT62
+custom_meshtastic_images = heltec-ht62-esp32c3-sx1262.svg
+custom_meshtastic_tags = Heltec
+
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr

variants/esp32c6/m5stack_unitc6l/platformio.ini

@@ -1,4 +1,13 @@
 [env:m5stack-unitc6l]
+custom_meshtastic_hw_model = 111
+custom_meshtastic_hw_model_slug = M5STACK_C6L
+custom_meshtastic_architecture = esp32-c6
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = M5Stack Unit C6L
+custom_meshtastic_images = m5_c6l.svg
+custom_meshtastic_tags = M5Stack
+
 extends = esp32c6_base
 board = esp32-c6-devkitc-1
 ;OpenOCD flash method
@@ -26,6 +35,7 @@ build_flags =
   -D HAS_BLUETOOTH=1
 	-DCONFIG_BT_NIMBLE_EXT_ADV=1
 	-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
+  -D NIMBLE_TWO
 monitor_speed=115200
 lib_ignore =
   NonBlockingRTTTL

variants/esp32s3/CDEBYTE_EoRa-S3/platformio.ini

@@ -1,4 +1,13 @@
 [env:CDEBYTE_EoRa-S3]
+custom_meshtastic_hw_model = 61
+custom_meshtastic_hw_model_slug = CDEBYTE_EORA_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = EBYTE EoRa-S3
+custom_meshtastic_tags = EByte
+custom_meshtastic_requires_dfu = true
+
 extends = esp32s3_base
 board = CDEBYTE_EoRa-S3
 build_flags =

variants/esp32s3/ELECROW-ThinkNode-G3/pins_arduino.h

@@ -0,0 +1,26 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 17;
+static const uint8_t SCL = 18;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 39;
+static const uint8_t MOSI = 40;
+static const uint8_t MISO = 41;
+static const uint8_t SCK = 42;
+
+// #define SPI_MOSI (11)
+// #define SPI_SCK (10)
+// #define SPI_MISO (9)
+// #define SPI_CS (12)
+
+// #define SDCARD_CS SPI_CS
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/ELECROW-ThinkNode-G3/platformio.ini

@@ -0,0 +1,22 @@
+[env:thinknode_g3]
+extends = esp32s3_base
+board = ESP32-S3-WROOM-1-N4
+board_build.psram_type = opi
+
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -D ELECROW_ThinkNode_G3
+  -D HAS_UDP_MULTICAST=1
+  -D BOARD_HAS_PSRAM
+  -D PRIVATE_HW
+#  -D CONFIG_ETH_ENABLED=1
+#  -D CONFIG_ETH_USE_ESP32_EMAC=1
+  -I variants/esp32s3/ELECROW-ThinkNode-G3
+  -mfix-esp32-psram-cache-issue
+
+lib_ignore = 
+    Ethernet
+
+lib_deps = 
+  ${esp32s3_base.lib_deps}
+#  file://../ESP32-CH390/ESP32-CH390-1.0.1.tar.gz

variants/esp32s3/ELECROW-ThinkNode-G3/variant.h

@@ -0,0 +1,36 @@
+#define HAS_GPS 0
+#define HAS_WIRE 0
+#define I2C_NO_RESCAN
+
+#define WIFI_LED 5
+#define WIFI_STATE_ON 0
+
+#define LED_PIN 6 // The blue LORA LED
+#define LED_STATE_ON 0
+#define BUTTON_PIN 4 // the external user button of the device, BOOT and RESET are not accessible without opening it up.
+
+#define USE_SX1262
+#define LORA_SCK 42
+#define LORA_MISO 41
+#define LORA_MOSI 40
+#define LORA_CS 39
+#define LORA_RESET 21
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 15
+#define SX126X_BUSY 47
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define PIN_POWER_EN 45
+
+// #define HAS_ETHERNET 1
+// #define USE_CH390D 1 // this driver uses the same stack as the ESP32 Wifi driver
+
+// #define ETH_MISO_PIN 47
+// #define ETH_MOSI_PIN 21
+// #define ETH_SCLK_PIN 48
+// #define ETH_CS_PIN 45
+// #define ETH_INT_PIN 14
+// #define ETH_RST_PIN -1
+// #define ETH_ADDR 1

variants/esp32s3/ELECROW-ThinkNode-M2/platformio.ini

@@ -1,4 +1,14 @@
 [env:thinknode_m2]
+custom_meshtastic_hw_model = 90
+custom_meshtastic_hw_model_slug = THINKNODE_M2
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = ThinkNode M2
+custom_meshtastic_images = thinknode_m2.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = false
+
 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
 build_flags =

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -1,4 +1,14 @@
 [env:thinknode_m5]
+custom_meshtastic_hw_model = 107
+custom_meshtastic_hw_model_slug = THINKNODE_M5
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = ThinkNode M5
+custom_meshtastic_images = thinknode_m1.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = false
+
 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
 build_flags =

variants/esp32s3/elecrow_panel/platformio.ini

@@ -75,6 +75,17 @@ build_flags =
   -D DISPLAY_SET_RESOLUTION
 
 [env:elecrow-adv-24-28-tft]
+custom_meshtastic_hw_model = 97
+custom_meshtastic_hw_model_slug = CROWPANEL
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Crowpanel Adv 2.4/2.8 TFT
+custom_meshtastic_images = crowpanel_2_4.svg, crowpanel_2_8.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = crowpanel_small_esp32s3_base
 build_flags =
   ${crowpanel_small_esp32s3_base.build_flags}
@@ -99,6 +110,17 @@ build_flags =
   -D LGFX_TOUCH_ROTATION=0
 
 [env:elecrow-adv-35-tft]
+custom_meshtastic_hw_model = 97
+custom_meshtastic_hw_model_slug = CROWPANEL
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Crowpanel Adv 3.5 TFT
+custom_meshtastic_images = crowpanel_3_5.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = crowpanel_small_esp32s3_base
 board_level = pr
 build_flags =
@@ -127,6 +149,17 @@ build_flags =
 
 ; 4.3, 5.0, 7.0 inch 800x480 IPS (V1)
 [env:elecrow-adv1-43-50-70-tft]
+custom_meshtastic_hw_model = 97
+custom_meshtastic_hw_model_slug = CROWPANEL
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Crowpanel Adv 4.3/5.0/7.0 TFT
+custom_meshtastic_images = crowpanel_5_0.svg, crowpanel_7_0.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = crowpanel_large_esp32s3_base
 build_flags =
   ${crowpanel_large_esp32s3_base.build_flags}

variants/esp32s3/esp32s3.ini

@@ -3,8 +3,3 @@ extends = esp32_common
 custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
-
-build_flags =
-  ${esp32_common.build_flags}
-  -DCONFIG_BT_NIMBLE_EXT_ADV=1
-  -DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2

variants/esp32s3/heltec_v3/platformio.ini

@@ -1,4 +1,14 @@
-[env:heltec-v3] 
+[env:heltec-v3]
+custom_meshtastic_hw_model = 43
+custom_meshtastic_hw_model_slug = HELTEC_V3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec V3
+custom_meshtastic_images = heltec-v3.svg, heltec-v3-case.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+ 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_level = pr

variants/esp32s3/heltec_v4/platformio.ini

@@ -10,6 +10,17 @@ build_flags =
 
 
 [env:heltec-v4]
+custom_meshtastic_hw_model = 110
+custom_meshtastic_hw_model_slug = HELTEC_V4
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec V4
+custom_meshtastic_images = heltec_v4.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = heltec_v4_base
 build_flags = 
   ${heltec_v4_base.build_flags}

variants/esp32s3/heltec_vision_master_e213/platformio.ini

@@ -1,4 +1,15 @@
 [env:heltec-vision-master-e213]
+custom_meshtastic_hw_model = 67
+custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_E213
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Vision Master E213
+custom_meshtastic_images = heltec-vision-master-e213.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_vision_master_e213
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_vision_master_e290/platformio.ini

@@ -1,5 +1,16 @@
 ; Using the original screen class
 [env:heltec-vision-master-e290]
+custom_meshtastic_hw_model = 68
+custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_E290
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Vision Master E290
+custom_meshtastic_images = heltec-vision-master-e290.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_vision_master_e290
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_vision_master_t190/platformio.ini

@@ -1,4 +1,15 @@
 [env:heltec-vision-master-t190]
+custom_meshtastic_hw_model = 66
+custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_T190
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Vision Master T190
+custom_meshtastic_images = heltec-vision-master-t190.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_vision_master_t190
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_wireless_paper/platformio.ini

@@ -1,5 +1,15 @@
 ; Using the original screen class
 [env:heltec-wireless-paper]
+custom_meshtastic_hw_model = 49
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_PAPER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Wireless Paper
+custom_meshtastic_images = heltec-wireless-paper.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_wireless_paper_v1/platformio.ini

@@ -1,4 +1,14 @@
 [env:heltec-wireless-paper-v1_0]
+custom_meshtastic_hw_model = 57
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_PAPER_V1_0
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Heltec Wireless Paper V1.0
+custom_meshtastic_images = heltec-wireless-paper-v1_0.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board_level = extra
 board = heltec_wifi_lora_32_V3

variants/esp32s3/heltec_wireless_tracker/platformio.ini

@@ -1,4 +1,15 @@
 [env:heltec-wireless-tracker]
+custom_meshtastic_hw_model = 48
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Wireless Tracker V1.1
+custom_meshtastic_images = heltec-wireless-tracker.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv

variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini

@@ -1,4 +1,14 @@
 [env:heltec-wireless-tracker-V1-0]
+custom_meshtastic_hw_model = 58
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER_V1_0
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Heltec Wireless Tracker V1.0
+custom_meshtastic_images = heltec-wireless-tracker.svg
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board_level = extra
 board = heltec_wireless_tracker

variants/esp32s3/heltec_wsl_v3/platformio.ini

@@ -1,4 +1,14 @@
-[env:heltec-wsl-v3] 
+[env:heltec-wsl-v3]
+custom_meshtastic_hw_model = 44
+custom_meshtastic_hw_model_slug = HELTEC_WSL_V3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Wireless Stick Lite V3
+custom_meshtastic_images = heltec-wsl-v3.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+ 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv

variants/esp32s3/mesh-tab/variant.h

@@ -55,5 +55,6 @@
 #define SX126X_RESET 14
 #define SX126X_RXEN 47
 #define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
 #endif

variants/esp32s3/picomputer-s3/platformio.ini

@@ -1,4 +1,12 @@
 [env:picomputer-s3]
+custom_meshtastic_hw_model = 52
+custom_meshtastic_hw_model_slug = PICOMPUTER_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Pi Computer S3
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = bpi_picow_esp32_s3
 board_check = true

variants/esp32s3/rak3312/platformio.ini

@@ -1,4 +1,15 @@
 [env:rak3312]
+custom_meshtastic_hw_model = 106
+custom_meshtastic_hw_model_slug = RAK3312
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = RAK3312
+custom_meshtastic_images = rak_3312.svg
+custom_meshtastic_tags = RAK
+custom_meshtastic_requires_dfu = false
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = wiscore_rak3312
 board_level = pr
@@ -13,8 +24,7 @@ build_flags =
 [env:rak3112]
 extends = esp32s3_base
 board = wiscore_rak3312
-board_level = pr
-board_check = true
+board_level = extra
 upload_protocol = esptool
 
 build_flags =

variants/esp32s3/seeed-sensecap-indicator/platformio.ini

@@ -1,5 +1,16 @@
 ; Seeed Studio SenseCAP Indicator
 [env:seeed-sensecap-indicator]
+custom_meshtastic_hw_model = 70
+custom_meshtastic_hw_model_slug = SENSECAP_INDICATOR
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Seeed SenseCAP Indicator
+custom_meshtastic_images = seeed-sensecap-indicator.svg
+custom_meshtastic_tags = Seeed
+custom_meshtastic_partition_scheme = 8MB
+ = true
+
 extends = esp32s3_base
 platform_packages =
     platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32/archive/aef7fef6de3329ed6f75512d46d63bba12b09bb5.zip ; add_tca9535 (based on 2.0.16)

variants/esp32s3/seeed_xiao_s3/platformio.ini

@@ -1,4 +1,15 @@
 [env:seeed-xiao-s3]
+custom_meshtastic_hw_model = 81
+custom_meshtastic_hw_model_slug = SEEED_XIAO_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Seeed Xiao ESP32-S3
+custom_meshtastic_images = seeed-xiao-s3.svg
+custom_meshtastic_tags = Seeed
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = seeed-xiao-s3
 board_level = pr

variants/esp32s3/station-g2/platformio.ini

@@ -1,4 +1,15 @@
 [env:station-g2]
+custom_meshtastic_hw_model = 31
+custom_meshtastic_hw_model_slug = STATION_G2
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = Station G2
+custom_meshtastic_images = station-g2.svg
+custom_meshtastic_tags = B&Q
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = station-g2
 board_level = pr

variants/esp32s3/t-beam-1w/pins_arduino.h

@@ -0,0 +1,25 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// I2C for OLED and sensors
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 9;
+
+// Default SPI mapped to Radio/SD
+static const uint8_t SS = 15;   // LoRa CS
+static const uint8_t MOSI = 11;
+static const uint8_t MISO = 12;
+static const uint8_t SCK = 13;
+
+// SD Card CS
+#define SDCARD_CS 10
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/t-beam-1w/platformio.ini

@@ -0,0 +1,14 @@
+; LilyGo T-Beam-1W (1 Watt LoRa with external PA)
+[env:t-beam-1w]
+extends = esp32s3_base
+board = t-beam-1w
+board_build.partitions = default_8MB.csv
+board_check = true
+
+lib_deps =
+  ${esp32s3_base.lib_deps}
+
+build_flags = 
+  ${esp32s3_base.build_flags} 
+  -I variants/esp32s3/t-beam-1w
+  -D T_BEAM_1W

variants/esp32s3/t-beam-1w/variant.h

@@ -0,0 +1,97 @@
+// LilyGo T-Beam-1W variant.h  
+// Configuration based on LilyGO utilities.h and RF documentation
+
+// I2C for OLED display (SH1106 at 0x3C)
+#define I2C_SDA 8
+#define I2C_SCL 9
+
+// GPS - Quectel L76K
+#define GPS_RX_PIN 5
+#define GPS_TX_PIN 6
+#define GPS_1PPS_PIN 7
+#define GPS_WAKEUP_PIN 16  // GPS_EN_PIN in LilyGO code
+#define HAS_GPS 1
+#define GPS_BAUDRATE 9600
+
+// Buttons
+#define BUTTON_PIN 0         // BUTTON 1
+#define BUTTON_PIN_ALT 17    // BUTTON 2
+
+// SPI (shared by LoRa and SD)
+#define SPI_MOSI 11
+#define SPI_SCK 13
+#define SPI_MISO 12
+#define SPI_CS 10
+
+// SD Card
+#define HAS_SDCARD
+#define SDCARD_USE_SPI1
+#define SDCARD_CS SPI_CS
+
+// LoRa Radio - SX1262 with 1W PA
+#define USE_SX1262
+
+#define LORA_SCK SPI_SCK
+#define LORA_MISO SPI_MISO  
+#define LORA_MOSI SPI_MOSI
+#define LORA_CS 15
+#define LORA_RESET 3
+#define LORA_DIO1 1
+#define LORA_BUSY 38
+
+// CRITICAL: Radio power enable - MUST be HIGH before lora.begin()!
+// GPIO 40 powers the SX1262 + PA module via LDO
+#define SX126X_POWER_EN 40
+
+// TX power offset for external PA (0 = no offset, full SX1262 power)
+#define TX_GAIN_LORA 10
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_BUSY
+#define SX126X_RESET LORA_RESET
+
+// RF switching configuration for 1W PA module
+// DIO2 controls PA (via SX126X_DIO2_AS_RF_SWITCH)
+// CTRL PIN (GPIO 21) controls LNA - must be HIGH during RX
+// Truth table: DIO2=1,CTRL=0 → TX (PA on, LNA off)
+//              DIO2=0,CTRL=1 → RX (PA off, LNA on)
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_RXEN 21  // LNA enable - HIGH during RX
+
+// TCXO voltage - required for radio init
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define SX126X_MAX_POWER 22
+#endif
+
+// LED
+#define LED_PIN 18
+#define LED_STATE_ON 1  // HIGH = ON
+
+// Battery ADC
+#define BATTERY_PIN 4
+#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+#define BATTERY_SENSE_SAMPLES 30
+#define ADC_MULTIPLIER 2.9333
+
+// NTC temperature sensor
+#define NTC_PIN 14
+
+// Fan control
+#define FAN_CTRL_PIN 41
+// Meshtastic standard fan control pin macro
+#define RF95_FAN_EN FAN_CTRL_PIN
+
+// PA Ramp Time - T-Beam 1W requires >800us stabilization (default is 200us)
+// Value 0x05 = RADIOLIB_SX126X_PA_RAMP_800U
+#define SX126X_PA_RAMP_US 0x05
+
+// Display - SH1106 OLED (128x64)
+#define USE_SH1106 
+#define OLED_WIDTH 128
+#define OLED_HEIGHT 64
+
+// 32768 Hz crystal present
+#define HAS_32768HZ 1

variants/esp32s3/t-deck-pro/platformio.ini

@@ -1,4 +1,15 @@
 [env:t-deck-pro]
+custom_meshtastic_hw_model = 102
+custom_meshtastic_hw_model_slug = T_DECK_PRO
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Deck Pro
+custom_meshtastic_images = tdeck_pro.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = t-deck-pro
 board_check = true

variants/esp32s3/t-deck/platformio.ini

@@ -1,5 +1,16 @@
 ; LilyGo T-Deck
 [env:t-deck]
+custom_meshtastic_hw_model = 50
+custom_meshtastic_hw_model_slug = T_DECK
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Deck
+custom_meshtastic_images = t-deck.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = t-deck
 board_check = true

variants/esp32s3/t-watch-s3/platformio.ini

@@ -1,5 +1,15 @@
 ; LilyGo T-Watch S3
 [env:t-watch-s3]
+custom_meshtastic_hw_model = 51
+custom_meshtastic_hw_model_slug = T_WATCH_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-Watch S3
+custom_meshtastic_images = t-watch-s3.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = t-watch-s3
 board_check = true

variants/esp32s3/tbeam-s3-core/platformio.ini

@@ -1,5 +1,16 @@
 ; The 1.0 release of the LilyGo TBEAM-S3-Core board 
 [env:tbeam-s3-core]
+custom_meshtastic_hw_model = 12
+custom_meshtastic_hw_model_slug = LILYGO_TBEAM_S3_CORE
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Beam Supreme
+custom_meshtastic_images = tbeam-s3-core.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = tbeam-s3-core
 board_build.partitions = default_8MB.csv