Merge branch 'master' into static-buffer-gps

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

bin/device-install.bat

@@ -7,6 +7,7 @@ SET "DEBUG=0"
 SET "PYTHON="
 SET "TFT_BUILD=0"
 SET "BIGDB8=0"
+SET "MUIDB8=0"
 SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
@@ -17,7 +18,8 @@ SET "BPS_RESET=0"
 SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
-SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
 SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
 
 GOTO getopts
@@ -162,6 +164,15 @@ FOR %%a IN (%BIGDB_8MB%) DO (
 )
 :end_loop_bigdb_8mb
 
+FOR %%a IN (%MUIDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %MUIDB_8MB%.
+        SET "MUIDB8=1"
+        GOTO end_loop_muidb_8mb
+    )
+)
+:end_loop_muidb_8mb
+
 FOR %%a IN (%BIGDB_16MB%) DO (
     IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
         @REM We are working with any of %BIGDB_16MB%.
@@ -172,6 +183,7 @@ FOR %%a IN (%BIGDB_16MB%) DO (
 :end_loop_bigdb_16mb
 
 IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
 IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
 
 @REM Extract BASENAME from %FILENAME% for later use.
@@ -216,6 +228,12 @@ IF %BIGDB8% EQU 1 (
     SET "SPIFFS_OFFSET=0x670000"
 )
 
+@REM Offsets for MUIDB 8mb.
+IF %MUIDB8% EQU 1 (
+    SET "OTA_OFFSET=0x5D0000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
 @REM Offsets for BigDB 16mb.
 IF %BIGDB16% EQU 1 (
     SET "OTA_OFFSET=0x650000"
@@ -232,14 +250,14 @@ IF NOT EXIST !SPIFFS_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!S
 
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash "!FILENAME!", but first erasing and writing system information..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase-flash || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase_flash || GOTO eof
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash 0x00 "!FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x00 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash BLEOTA "!OTA_FILENAME!" at OTA_OFFSET !OTA_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash SPIFFS "!SPIFFS_FILENAME!" at SPIFFS_OFFSET !SPIFFS_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -251,9 +269,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write-flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-install.sh

@@ -11,31 +11,33 @@ FIRMWARE_OFFSET=0x00
 
 # Variant groups
 BIGDB_8MB=(
-	"picomputer-s3"
+    "crowpanel-esp32s3"
-	"unphone"
+    "heltec_capsule_sensor_v3"
-	"seeed-sensecap-indicator"
+    "heltec-v3"
-	"crowpanel-esp32s3"
+    "heltec-vision-master-e213"
-	"heltec_capsule_sensor_v3"
+    "heltec-vision-master-e290"
-	"heltec-v3"
+    "heltec-vision-master-t190"
-	"heltec-vision-master-e213"
+    "heltec-wireless-paper"
-	"heltec-vision-master-e290"
+    "heltec-wireless-tracker"
-	"heltec-vision-master-t190"
+    "heltec-wsl-v3"
-	"heltec-wireless-paper"
+    "icarus"
-	"heltec-wireless-tracker"
+    "seeed-xiao-s3"
-	"heltec-wsl-v3"
+    "tbeam-s3-core"
-	"icarus"
+    "tracksenger"
-	"seeed-xiao-s3"
+)
-	"tbeam-s3-core"
+MUIDB_8MB=(
-	"tracksenger"
+    "picomputer-s3"
+    "unphone"
+    "seeed-sensecap-indicator"
 )
 BIGDB_16MB=(
-	"t-deck"
+    "t-deck"
-	"mesh-tab"
+    "mesh-tab"
-	"t-energy-s3"
+    "t-energy-s3"
-	"dreamcatcher"
+    "dreamcatcher"
-	"ESP32-S3-Pico"
+    "ESP32-S3-Pico"
-	"m5stack-cores3"
+    "m5stack-cores3"
-	"station-g2"
+    "station-g2"
     "t-eth-elite"
     "tlora-pager"
     "t-watch-s3"
@@ -110,8 +112,8 @@ while [ $# -gt 0 ]; do
         shift
         ;;
     --1200bps-reset)
-		    BPS_RESET=true
+        BPS_RESET=true
-		    ;;
+        ;;
     --) # Stop parsing options
         shift
         break
@@ -162,6 +164,13 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
         fi
     done
 
+    for variant in "${MUIDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x5D0000
+        fi
+    done
+
     # littlefs* offset for BigDB 16mb and OTA OFFSET.
     for variant in "${BIGDB_16MB[@]}"; do
         if [ -z "${FILENAME##*"$variant"*}" ]; then
@@ -208,9 +217,9 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     $ESPTOOL_CMD erase-flash
     $ESPTOOL_CMD write-flash $FIRMWARE_OFFSET "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD write-flash $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD write-flash $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

boards/seeed-sensecap-indicator.json

@@ -2,7 +2,7 @@
   "build": {
     "arduino": {
       "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
+      "partitions": "partition-table-8MB.csv",
       "memory_type": "qio_opi"
     },
     "core": "esp32",

boards/unphone.json

@@ -3,7 +3,7 @@
     "arduino": {
       "ldscript": "esp32s3_out.ld",
       "memory_type": "qio_opi",
-      "partitions": "default_8MB.csv"
+      "partitions": "partition-table-8MB.csv"
     },
     "core": "esp32",
     "extra_flags": [

partition-table-8MB.csv

@@ -0,0 +1,7 @@
+# This is a layout for 8MB of flash for MUI devices
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x5C0000,
+flashApp, app,  ota_1,   0x5D0000,0x0A0000,
+spiffs,   data, spiffs,  0x670000,0x180000

platformio.ini

@@ -118,7 +118,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/a04bc94b45dacdabf3ae1832d4591390e35fc61f.zip
+	https://github.com/meshtastic/device-ui/archive/3677476c8a823ee85056b5fb1d146a3e193f8276.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/gps/GPS.cpp

@@ -1,5 +1,4 @@
 #include <cstring> // Include for strstr
-#include <string>
 #include <vector>
 
 #include "configuration.h"
@@ -1370,34 +1369,42 @@ GnssModel_t GPS::probe(int serialSpeed)
 
 GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipInfo> &responseMap)
 {
-    String response = "";
+    char response[256] = {0}; // Fixed buffer instead of String
+    uint16_t responseLen = 0;
     unsigned long start = millis();
     while (millis() - start < timeout) {
         if (_serial_gps->available()) {
-            response += (char)_serial_gps->read();
+            char c = _serial_gps->read();
 
-            if (response.endsWith(",") || response.endsWith("\r\n")) {
+            // Add char to buffer if there's space
+            if (responseLen < sizeof(response) - 1) {
+                response[responseLen++] = c;
+                response[responseLen] = '\0';
+            }
+
+            if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
 #ifdef GPS_DEBUG
-                LOG_DEBUG(response.c_str());
+                LOG_DEBUG(response);
 #endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
-                    if (strstr(response.c_str(), chipInfo.detectionString.c_str()) != nullptr) {
+                    if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
                         return chipInfo.driver;
                     }
                 }
             }
-            if (response.endsWith("\r\n")) {
+            if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
-                response.trim();
+                // Reset the response buffer for the next potential message
-                response = ""; // Reset the response string for the next potential message
+                responseLen = 0;
+                response[0] = '\0';
             }
         }
     }
 #ifdef GPS_DEBUG
-    LOG_DEBUG(response.c_str());
+    LOG_DEBUG(response);
 #endif
-    return GNSS_MODEL_UNKNOWN; // Return empty string on timeout
+    return GNSS_MODEL_UNKNOWN; // Return unknown on timeout
 }
 
 GPS *GPS::createGps()
@@ -1532,10 +1539,9 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         t.tm_year = d.year() - 1900;
         t.tm_isdst = false;
         if (t.tm_mon > -1) {
-            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
-                      t.tm_sec, ti.age());
             if (perhapsSetRTC(RTCQualityGPS, t) == RTCSetResultSuccess) {
-                LOG_DEBUG("Time set.");
+                LOG_DEBUG("NMEA GPS time set %02d-%02d-%02d %02d:%02d:%02d age %d", d.year(), d.month(), t.tm_mday, t.tm_hour,
+                          t.tm_min, t.tm_sec, ti.age());
                 return true;
             } else {
                 return false;

src/input/RotaryEncoderImpl.cpp

@@ -40,10 +40,7 @@ bool RotaryEncoderImpl::init()
 
 int32_t RotaryEncoderImpl::runOnce()
 {
-    InputEvent e;
+    InputEvent e{originName, INPUT_BROKER_NONE, 0, 0, 0};
-    e.inputEvent = INPUT_BROKER_NONE;
-    e.source = this->originName;
-
     static uint32_t lastPressed = millis();
     if (rotary->readButton() == RotaryEncoder::ButtonState::BUTTON_PRESSED) {
         if (lastPressed + 200 < millis()) {

src/mesh/generated/meshtastic/config.pb.h

@@ -64,7 +64,12 @@ typedef enum _meshtastic_Config_DeviceConfig_Role {
     in areas not already covered by other routers, or to bridge around problematic terrain,
     but should not be given priority over other routers in order to avoid unnecessaraily
     consuming hops. */
-    meshtastic_Config_DeviceConfig_Role_ROUTER_LATE = 11
+    meshtastic_Config_DeviceConfig_Role_ROUTER_LATE = 11,
+    /* Description: Treats packets from or to favorited nodes as ROUTER, and all other packets as CLIENT.
+ Technical Details: Used for stronger attic/roof nodes to distribute messages more widely
+    from weaker, indoor, or less-well-positioned nodes. Recommended for users with multiple nodes
+    where one CLIENT_BASE acts as a more powerful base station, such as an attic/roof node. */
+    meshtastic_Config_DeviceConfig_Role_CLIENT_BASE = 12
 } meshtastic_Config_DeviceConfig_Role;
 
 /* Defines the device's behavior for how messages are rebroadcast */
@@ -646,8 +651,8 @@ extern "C" {
 
 /* Helper constants for enums */
 #define _meshtastic_Config_DeviceConfig_Role_MIN meshtastic_Config_DeviceConfig_Role_CLIENT
-#define _meshtastic_Config_DeviceConfig_Role_MAX meshtastic_Config_DeviceConfig_Role_ROUTER_LATE
+#define _meshtastic_Config_DeviceConfig_Role_MAX meshtastic_Config_DeviceConfig_Role_CLIENT_BASE
-#define _meshtastic_Config_DeviceConfig_Role_ARRAYSIZE ((meshtastic_Config_DeviceConfig_Role)(meshtastic_Config_DeviceConfig_Role_ROUTER_LATE+1))
+#define _meshtastic_Config_DeviceConfig_Role_ARRAYSIZE ((meshtastic_Config_DeviceConfig_Role)(meshtastic_Config_DeviceConfig_Role_CLIENT_BASE+1))
 
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN meshtastic_Config_DeviceConfig_RebroadcastMode_ALL
 #define _meshtastic_Config_DeviceConfig_RebroadcastMode_MAX meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY

src/modules/Modules.cpp

@@ -141,7 +141,10 @@ void setupModules()
         detectionSensorModule = new DetectionSensorModule();
 #endif
 #if !MESHTASTIC_EXCLUDE_ATAK
-        atakPluginModule = new AtakPluginModule();
+        if (IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_TAK,
+                      meshtastic_Config_DeviceConfig_Role_TAK_TRACKER)) {
+            atakPluginModule = new AtakPluginModule();
+        }
 #endif
 #if !MESHTASTIC_EXCLUDE_PKI
         keyVerificationModule = new KeyVerificationModule();

test/test_meshpacket_serializer/ports/test_encrypted.cpp

@@ -1,27 +1,5 @@
 #include "../test_helpers.h"
 
-// test data initialization
-const int from = 0x11223344;
-const int to = 0x55667788;
-const int id = 0x9999;
-
-// Helper function to create a test encrypted packet
-meshtastic_MeshPacket create_test_encrypted_packet(uint32_t from, uint32_t to, uint32_t id, const char *data)
-{
-    meshtastic_MeshPacket packet = meshtastic_MeshPacket_init_zero;
-    packet.from = from;
-    packet.to = to;
-    packet.id = id;
-    packet.which_payload_variant = meshtastic_MeshPacket_encrypted_tag;
-
-    if (data) {
-        packet.encrypted.size = strlen(data);
-        memcpy(packet.encrypted.bytes, data, packet.encrypted.size);
-    }
-
-    return packet;
-}
-
 // Helper function for all encrypted packet assertions
 void assert_encrypted_packet(const std::string &json, meshtastic_MeshPacket packet)
 {
@@ -61,58 +39,20 @@ void assert_encrypted_packet(const std::string &json, meshtastic_MeshPacket pack
 // Test encrypted packet serialization
 void test_encrypted_packet_serialization()
 {
-    meshtastic_MeshPacket packet = meshtastic_MeshPacket_init_zero;
+    const char *data = "encrypted_payload_data";
-    packet.from = 0x11223344;
+    meshtastic_MeshPacket packet =
-    packet.to = 0x55667788;
+        create_test_packet(meshtastic_PortNum_TEXT_MESSAGE_APP, reinterpret_cast<const uint8_t *>(data), strlen(data),
-    packet.id = 0x9999;
+                           meshtastic_MeshPacket_encrypted_tag);
-    packet.which_payload_variant = meshtastic_MeshPacket_encrypted_tag;
-
-    // Add some dummy encrypted data
-    const char *encrypted_data = "encrypted_payload_data";
-    packet.encrypted.size = strlen(encrypted_data);
-    memcpy(packet.encrypted.bytes, encrypted_data, packet.encrypted.size);
-
     std::string json = MeshPacketSerializer::JsonSerializeEncrypted(&packet);
-    TEST_ASSERT_TRUE(json.length() > 0);
 
-    JSONValue *root = JSON::Parse(json.c_str());
+    assert_encrypted_packet(json, packet);
-    TEST_ASSERT_NOT_NULL(root);
-    TEST_ASSERT_TRUE(root->IsObject());
-
-    JSONObject jsonObj = root->AsObject();
-
-    // Check basic packet fields
-    TEST_ASSERT_TRUE(jsonObj.find("from") != jsonObj.end());
-    TEST_ASSERT_EQUAL(0x11223344, (uint32_t)jsonObj["from"]->AsNumber());
-
-    TEST_ASSERT_TRUE(jsonObj.find("to") != jsonObj.end());
-    TEST_ASSERT_EQUAL(0x55667788, (uint32_t)jsonObj["to"]->AsNumber());
-
-    TEST_ASSERT_TRUE(jsonObj.find("id") != jsonObj.end());
-    TEST_ASSERT_EQUAL(0x9999, (uint32_t)jsonObj["id"]->AsNumber());
-
-    // Check that it has encrypted data fields (not "payload" but "bytes" and "size")
-    TEST_ASSERT_TRUE(jsonObj.find("bytes") != jsonObj.end());
-    TEST_ASSERT_TRUE(jsonObj["bytes"]->IsString());
-
-    TEST_ASSERT_TRUE(jsonObj.find("size") != jsonObj.end());
-    TEST_ASSERT_EQUAL(22, (int)jsonObj["size"]->AsNumber()); // strlen("encrypted_payload_data") = 22
-
-    // The encrypted data should be hex-encoded
-    std::string encrypted_hex = jsonObj["bytes"]->AsString();
-    TEST_ASSERT_TRUE(encrypted_hex.length() > 0);
-    // Should be twice the size of the original data (hex encoding)
-    TEST_ASSERT_EQUAL(44, encrypted_hex.length()); // 22 * 2 = 44
-
-    delete root;
 }
 
 // Test empty encrypted packet
 void test_empty_encrypted_packet()
 {
-    const char *data = "";
+    meshtastic_MeshPacket packet =
-
+        create_test_packet(meshtastic_PortNum_TEXT_MESSAGE_APP, nullptr, 0, meshtastic_MeshPacket_encrypted_tag);
-    meshtastic_MeshPacket packet = create_test_encrypted_packet(from, to, id, data);
     std::string json = MeshPacketSerializer::JsonSerializeEncrypted(&packet);
 
     assert_encrypted_packet(json, packet);

test/test_meshpacket_serializer/test_serializer.cpp

@@ -4,6 +4,10 @@
 
 // Forward declarations for test functions
 void test_text_message_serialization();
+void test_text_message_serialization_null();
+void test_text_message_serialization_long_text();
+void test_text_message_serialization_oversized();
+void test_text_message_serialization_invalid_utf8();
 void test_position_serialization();
 void test_nodeinfo_serialization();
 void test_waypoint_serialization();
@@ -14,6 +18,7 @@ void test_telemetry_environment_metrics_missing_fields();
 void test_telemetry_environment_metrics_complete_coverage();
 void test_telemetry_environment_metrics_unset_fields();
 void test_encrypted_packet_serialization();
+void test_empty_encrypted_packet();
 
 void setup()
 {
@@ -21,6 +26,10 @@ void setup()
 
     // Text message tests
     RUN_TEST(test_text_message_serialization);
+    RUN_TEST(test_text_message_serialization_null);
+    RUN_TEST(test_text_message_serialization_long_text);
+    RUN_TEST(test_text_message_serialization_oversized);
+    RUN_TEST(test_text_message_serialization_invalid_utf8);
 
     // Position tests
     RUN_TEST(test_position_serialization);
@@ -41,6 +50,7 @@ void setup()
 
     // Encrypted packet test
     RUN_TEST(test_encrypted_packet_serialization);
+    RUN_TEST(test_empty_encrypted_packet);
 
     UNITY_END();
 }

variants/esp32s3/picomputer-s3/platformio.ini

@@ -2,7 +2,7 @@
 extends = esp32s3_base
 board = bpi_picow_esp32_s3
 board_check = true
-board_build.partitions = default_8MB.csv
+board_build.partitions = partition-table-8MB.csv
 ;OpenOCD flash method
 ;upload_protocol = esp-builtin
 ;Normal method

variants/esp32s3/seeed-sensecap-indicator/platformio.ini

@@ -6,7 +6,7 @@ platform_packages =
 
 board = seeed-sensecap-indicator
 board_check = true
-board_build.partitions = default_8MB.csv
+board_build.partitions = partition-table-8MB.csv
 upload_protocol = esptool
 
 build_flags = ${esp32_base.build_flags}

variants/esp32s3/unphone/platformio.ini

@@ -3,7 +3,7 @@
 [env:unphone]
 extends = esp32s3_base
 board = unphone
-board_build.partitions = default_8MB.csv
+board_build.partitions = partition-table-8MB.csv
 upload_speed = 921600
 monitor_speed = 115200
 monitor_filters = esp32_exception_decoder
@@ -20,6 +20,7 @@ build_flags =
   -D UNPHONE_LORA=0
   -D UNPHONE_FACTORY_MODE=0
   -D USE_SX127x
+  -D SDCARD_CS=43
 
 build_src_filter =
   ${esp32s3_base.build_src_filter}
@@ -41,6 +42,7 @@ build_flags =
   -D HAS_SCREEN=1
   -D HAS_TFT=1
   -D HAS_SDCARD
+  -D SDCARD_CS=43
   -D DISPLAY_SET_RESOLUTION
   -D RAM_SIZE=6144
   -D LV_CACHE_DEF_SIZE=2097152

variants/esp32s3/unphone/variant.h

@@ -52,7 +52,6 @@
 #undef GPS_TX_PIN
 
 #define SD_SPI_FREQUENCY 25000000
-#define SDCARD_CS 43
 
 #define LED_PIN 13     // the red part of the RGB LED
 #define LED_STATE_ON 0 // State when LED is lit