Update src/platform/portduino/ch341a_i2c.c

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

.clusterfuzzlite/build.sh

@@ -51,7 +51,7 @@ for f in .clusterfuzzlite/*_fuzzer.cpp; do
 	fuzzer=$(basename "$f" .cpp)
 	cp -f "$f" src/fuzzer.cpp
 	pio run -vvv --environment "$PIO_ENV"
-	program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/meshtasticd"
+	program="$PLATFORMIO_WORKSPACE_DIR/build/$PIO_ENV/program"
 	cp "$program" "$OUT/$fuzzer"
 
 	# Copy shared libraries used by the fuzzer.

.devcontainer/Dockerfile

@@ -1,7 +1,7 @@
 # trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
-FROM mcr.microsoft.com/devcontainers/cpp:2-debian-13
+FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
 
 USER root
 

.devcontainer/devcontainer.json

@@ -8,7 +8,7 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "3.14"
+      "version": "latest"
     }
   },
   "customizations": {

.github/actionlint.yaml

@@ -2,5 +2,4 @@
 self-hosted-runner:
   # Labels of self-hosted runner in array of strings.
   labels:
-    - arctastic
     - test-runner

.github/actions/build-variant/action.yml

@@ -100,9 +100,9 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v5
+      uses: actions/upload-artifact@v4
       with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}
+        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true
         path: |
           ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v6
+      uses: actions/checkout@v5
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -18,12 +18,11 @@ permissions: read-all
 jobs:
   pio-build:
     name: build-${{ inputs.platform }}
-    # Use 'arctastic' self-hosted runner pool when building in the main repo
-    runs-on: ${{ github.repository_owner == 'meshtastic' && 'arctastic' || 'ubuntu-latest' }}
+    runs-on: ubuntu-24.04
     outputs:
       artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,29 +55,15 @@ jobs:
           ota_firmware_source: ${{ steps.ota_dir.outputs.src || '' }}
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
-      - name: Echo manifest from release/firmware-*.mt.json to job summary
-        if: ${{ always() }}
-        env:
-          PIO_ENV: ${{ inputs.pio_env }}
-        run: |
-          echo "## Manifest: \`$PIO_ENV\`" >> $GITHUB_STEP_SUMMARY
-          echo '```json' >> $GITHUB_STEP_SUMMARY
-          cat release/firmware-*.mt.json >> $GITHUB_STEP_SUMMARY
-          echo '' >> $GITHUB_STEP_SUMMARY
-          echo '```' >> $GITHUB_STEP_SUMMARY
-
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         id: upload
         with:
-          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}
+          name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip
           overwrite: true
           path: |
-            release/*.mt.json
             release/*.bin
             release/*.elf
             release/*.uf2
             release/*.hex
-            release/*.zip
-            release/device-*.sh
-            release/device-*.bat
+            release/*-ota.zip

.github/workflows/build_one_arch.yml

@@ -0,0 +1,232 @@
+name: Build One Arch
+
+on:
+  workflow_dispatch:
+    inputs:
+      # trunk-ignore(checkov/CKV_GHA_7)
+      arch:
+        type: choice
+        options:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+          - native
+
+permissions: read-all
+
+env:
+  INPUT_ARCH: ${{ github.event.inputs.arch }}
+
+jobs:
+  setup:
+    runs-on: ubuntu-24.04
+    steps:
+      - uses: actions/checkout@v5
+      - uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
+          cache: pip
+      - run: pip install -U platformio
+      - name: Generate matrix
+        id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py $INPUT_ARCH --level extra)
+          echo "Name: $GITHUB_REF_NAME Base: $GITHUB_BASE_REF Ref: $GITHUB_REF"
+          echo "selected_arch=$TARGETS" >> $GITHUB_OUTPUT
+    outputs:
+      selected_arch: ${{ steps.jsonStep.outputs.selected_arch }}
+
+  version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v5
+      - name: Get release version string
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        id: version
+        env:
+          BUILD_LOCATION: local
+    outputs:
+      long: ${{ steps.version.outputs.long }}
+      deb: ${{ steps.version.outputs.deb }}
+
+  build:
+    if: ${{ github.event_name != 'workflow_dispatch' }}
+    needs: [setup, version]
+    strategy:
+      fail-fast: false
+      matrix:
+        build: ${{ fromJson(needs.setup.outputs.selected_arch) }}
+    uses: ./.github/workflows/build_firmware.yml
+    with:
+      version: ${{ needs.version.outputs.long }}
+      pio_env: ${{ matrix.build.board }}
+      platform: ${{ matrix.build.arch }}
+
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker-deb-amd64:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-deb-amd64-tft:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-alp-amd64-tft:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm64
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  docker-deb-armv7:
+    if: ${{ github.event_name != 'workflow_dispatch' || inputs.arch == 'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm/v7
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  gather-artifacts:
+    permissions:
+      contents: write
+      pull-requests: write
+    strategy:
+      fail-fast: false
+      matrix:
+        arch:
+          - esp32
+          - esp32s3
+          - esp32c3
+          - esp32c6
+          - nrf52840
+          - rp2040
+          - rp2350
+          - stm32
+    runs-on: ubuntu-latest
+    needs: [version, build]
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v5
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - uses: actions/download-artifact@v5
+        with:
+          path: ./
+          pattern: firmware-${{inputs.arch}}-*
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
+      - name: Repackage in single firmware zip
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          overwrite: true
+          path: |
+            ./firmware-*.bin
+            ./firmware-*.uf2
+            ./firmware-*.hex
+            ./firmware-*-ota.zip
+            ./device-*.sh
+            ./device-*.bat
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
+          retention-days: 30
+
+      - uses: actions/download-artifact@v5
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          merge-multiple: true
+          path: ./output
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
+
+      - name: Repackage in single elfs zip
+        uses: actions/upload-artifact@v4
+        with:
+          name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
+          overwrite: true
+          path: ./*.elf
+          retention-days: 30
+
+      - uses: scruplelesswizard/comment-artifact@main
+        if: ${{ github.event_name == 'pull_request' }}
+        with:
+          name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
+          description: "Download firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
+          github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/build_one_target.yml

@@ -15,6 +15,7 @@ on:
           - rp2040
           - rp2350
           - stm32
+          - native
       target:
         type: string
         required: false
@@ -41,9 +42,10 @@ jobs:
           - rp2040
           - rp2350
           - stm32
+
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -58,13 +60,13 @@ jobs:
           echo "Arch: ${{matrix.arch}}" >> $GITHUB_STEP_SUMMARY
           echo "Ref: $GITHUB_REF" >> $GITHUB_STEP_SUMMARY
           echo "Targets:" >> $GITHUB_STEP_SUMMARY
-          echo $TARGETS | jq -r 'sort_by(.board) |.[] | "- " + .board' >> $GITHUB_STEP_SUMMARY
+          echo $TARGETS >> $GITHUB_STEP_SUMMARY
 
   version:
     if: ${{ inputs.target != '' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -85,6 +87,81 @@ jobs:
       pio_env: ${{ inputs.target }}
       platform: ${{ inputs.arch }}
 
+  build-debian-src:
+    if: ${{ github.repository == 'meshtastic/firmware' && inputs.arch == 'native' }}
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  package-pio-deps-native-tft:
+    if: ${{ inputs.arch == 'native' }}
+    uses: ./.github/workflows/package_pio_deps.yml
+    with:
+      pio_env: native-tft
+    secrets: inherit
+
+  test-native:
+    if: ${{ !contains(github.ref_name, 'event/') && github.event_name != 'workflow_dispatch' ||  !contains(github.ref_name, 'event/') && inputs.arch == 'native' && inputs.target != '' }}
+    uses: ./.github/workflows/test_native.yml
+
+  docker-deb-amd64:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-deb-amd64-tft:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-alp-amd64-tft:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm64
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  docker-deb-armv7:
+    if: ${{ inputs.target != '' && inputs.arch ==  'native' }}
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm/v7
+      runs-on: ubuntu-24.04-arm
+      push: false
+
   gather-artifacts:
     permissions:
       contents: write
@@ -93,12 +170,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           path: ./
           pattern: firmware-*-*
@@ -111,7 +188,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -119,7 +196,7 @@ jobs:
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -127,7 +204,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -139,14 +216,14 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -35,7 +35,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -59,7 +59,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -81,7 +81,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -119,26 +119,60 @@ jobs:
     if: ${{ !contains(github.ref_name, 'event/') && github.repository == 'meshtastic/firmware' }}
     uses: ./.github/workflows/test_native.yml
 
-  docker:
-    strategy:
-      fail-fast: false
-      matrix:
-        distro: [debian, alpine]
-        platform: [linux/amd64, linux/arm64, linux/arm/v7]
-        pio_env: [native, native-tft]
-        exclude:
-          - distro: alpine
-            platform: linux/arm/v7
-          - pio_env: native-tft
-            platform: linux/arm64
-          - pio_env: native-tft
-            platform: linux/arm/v7
+  docker-deb-amd64:
+    if: github.repository == 'meshtastic/firmware'
     uses: ./.github/workflows/docker_build.yml
     with:
-      distro: ${{ matrix.distro }}
-      platform: ${{ matrix.platform }}
-      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
-      pio_env: ${{ matrix.pio_env }}
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-deb-amd64-tft:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-alp-amd64-tft:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm64
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  docker-deb-armv7:
+    if: github.repository == 'meshtastic/firmware'
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm/v7
+      runs-on: ubuntu-24.04-arm
       push: false
 
   gather-artifacts:
@@ -163,12 +197,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -177,17 +211,19 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -R
 
+      - name: Move files up
+        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
           path: |
-            ./firmware-*.mt.json
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -195,7 +231,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -207,16 +243,16 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -234,14 +270,18 @@ jobs:
     outputs:
       upload_url: ${{ steps.create_release.outputs.upload_url }}
     needs:
-      - setup
       - version
       - gather-artifacts
       - build-debian-src
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
 
       - name: Create release
         uses: softprops/action-gh-release@v2
@@ -255,14 +295,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -278,25 +318,10 @@ jobs:
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Generate Release manifest
-        run: |
-          jq -n --arg ver "${{ needs.version.outputs.long }}" --argjson targets ${{ toJson(needs.setup.outputs.all) }} '{
-            "version": $ver,
-            "targets": $targets
-          }' > firmware-${{ needs.version.outputs.long }}.json
-
-      - name: Save Release manifest artifact
-        uses: actions/upload-artifact@v5
-        with:
-          name: manifest-${{ needs.version.outputs.long }}
-          overwrite: true
-          path: firmware-${{ needs.version.outputs.long }}.json
-
-      - name: Add sources to GitHub Release
+      - name: Add Linux sources to GtiHub Release
         # Only run when targeting master branch with workflow_dispatch
         if: ${{ github.ref_name == 'master' }}
         run: |
-          gh release upload v${{ needs.version.outputs.long }} ./firmware-${{ needs.version.outputs.long }}.json
           gh release upload v${{ needs.version.outputs.long }} ./output/meshtasticd-${{ needs.version.outputs.deb }}-src.zip
           gh release upload v${{ needs.version.outputs.long }} ./output/platformio-deps-native-tft-${{ needs.version.outputs.long }}.zip
         env:
@@ -320,14 +345,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -338,15 +363,15 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
@@ -375,26 +400,19 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - name: Get firmware artifacts
-        uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true
           path: ./publish
 
-      - name: Get manifest artifact
-        uses: actions/download-artifact@v6
-        with:
-          pattern: manifest-${{ needs.version.outputs.long }}
-          path: ./publish
-
       - name: Publish firmware to meshtastic.github.io
         uses: peaceiris/actions-gh-pages@v4
         env:

.github/workflows/merge_queue.yml

@@ -17,7 +17,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -40,7 +40,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -62,7 +62,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -99,26 +99,54 @@ jobs:
     if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
-  docker:
-    strategy:
-      fail-fast: false
-      matrix:
-        distro: [debian, alpine]
-        platform: [linux/amd64, linux/arm64, linux/arm/v7]
-        pio_env: [native, native-tft]
-        exclude:
-          - distro: alpine
-            platform: linux/arm/v7
-          - pio_env: native-tft
-            platform: linux/arm64
-          - pio_env: native-tft
-            platform: linux/arm/v7
+  docker-deb-amd64:
     uses: ./.github/workflows/docker_build.yml
     with:
-      distro: ${{ matrix.distro }}
-      platform: ${{ matrix.platform }}
-      runs-on: ${{ contains(matrix.platform, 'arm') && 'ubuntu-24.04-arm' || 'ubuntu-24.04' }}
-      pio_env: ${{ matrix.pio_env }}
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-deb-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-alp-amd64:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+
+  docker-alp-amd64-tft:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: alpine
+      platform: linux/amd64
+      runs-on: ubuntu-24.04
+      push: false
+      pio_env: native-tft
+
+  docker-deb-arm64:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm64
+      runs-on: ubuntu-24.04-arm
+      push: false
+
+  docker-deb-armv7:
+    uses: ./.github/workflows/docker_build.yml
+    with:
+      distro: debian
+      platform: linux/arm/v7
+      runs-on: ubuntu-24.04-arm
       push: false
 
   gather-artifacts:
@@ -142,12 +170,12 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +188,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -168,7 +196,7 @@ jobs:
             ./firmware-*.bin
             ./firmware-*.uf2
             ./firmware-*.hex
-            ./firmware-*.zip
+            ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
@@ -176,7 +204,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -188,16 +216,16 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -221,7 +249,12 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
+
+      - name: Setup Python
+        uses: actions/setup-python@v6
+        with:
+          python-version: 3.x
 
       - name: Create release
         uses: softprops/action-gh-release@v2
@@ -235,14 +268,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -285,14 +318,14 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -303,15 +336,15 @@ jobs:
 
       - name: Device scripts permissions
         run: |
-          chmod +x ./output/device-install.sh || true
-          chmod +x ./output/device-update.sh || true
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
 
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}
+          name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
@@ -340,14 +373,14 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v5
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: recursive
           path: meshtasticd
@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_enforce_labels.yml

@@ -17,7 +17,7 @@ jobs:
         with:
           script: |
             const labels = context.payload.pull_request.labels.map(label => label.name);
-            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk', 'cleanup'];
+            const requiredLabels = ['bugfix', 'enhancement', 'hardware-support', 'dependencies', 'submodules', 'github_actions', 'trunk'];
             const hasRequiredLabel = labels.some(label => requiredLabels.includes(label));
             if (!hasRequiredLabel) {
               core.setFailed(`PR must have at least one of the following labels before it can be merged: ${requiredLabels.join(', ')}.`);

.github/workflows/pr_tests.yml

@@ -40,7 +40,7 @@ jobs:
       checks: write
       pull-requests: write
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
@@ -50,9 +50,9 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Parse test results and create detailed summary

.github/workflows/release_channels.yml

@@ -60,10 +60,7 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          # Always use master branch for version bumps
-          ref: master
+        uses: actions/checkout@v5
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       # step 2
       - name: full scan
@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
           name: report.sarif
           overwrite: true
@@ -41,7 +41,7 @@ jobs:
 
       # step 4
       - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v4
+        uses: github/codeql-action/upload-sarif@v3
         with:
           sarif_file: report.sarif
           category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           fetch-depth: 0
 

.github/workflows/stale_bot.yml

@@ -17,10 +17,8 @@ jobs:
 
     steps:
       - name: Stale PR+Issues
-        uses: actions/stale@v10.1.1
+        uses: actions/stale@v10.1.0
         with:
           days-before-stale: 45
-          stale-issue-message: This issue has not had any comment or update in the last month. If it is still relevant, please post update comments. If no comments are made, this issue will be closed automagically in 7 days.
-          close-issue-message: This issue has not had any comment since the last notice. It has been closed automatically. If this is incorrect, or the issue becomes relevant again, please request that it is reopened.
-          exempt-issue-labels: pinned,3.0,triaged,backlog
-          exempt-pr-labels: pinned,3.0,triaged,backlog
+          exempt-issue-labels: pinned,3.0
+          exempt-pr-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -40,7 +40,7 @@ jobs:
 
       - name: Integration test
         run: |
-          .pio/build/coverage/meshtasticd -s &
+          .pio/build/coverage/program -s &
           PID=$!
           timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
           echo "Simulator started, launching python test..."
@@ -59,10 +59,10 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         if: always() # run this step even if previous step failed
         with:
-          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}
+          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./coverage_*.info
 
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -94,9 +94,9 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./testreport.xml
 
@@ -108,10 +108,10 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         if: always() # run this step even if previous step failed
         with:
-          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}
+          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./coverage_*.info
 
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -137,22 +137,22 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.3.0
+        uses: dorny/test-reporter@v2.1.1
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v6
+        uses: actions/download-artifact@v5
         with:
-          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}
+          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
           merge-multiple: true
 
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v5
+        uses: actions/upload-artifact@v4
         with:
-          name: code-coverage-report-${{ steps.version.outputs.long }}
+          name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -20,9 +20,9 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
-      # - uses: actions/setup-python@v6
+      # - uses: actions/setup-python@v5
       #   with:
       #     python-version: '3.10'
 
@@ -47,9 +47,9 @@ jobs:
           pio upgrade
 
       - name: Setup Node
-        uses: actions/setup-node@v6
+        uses: actions/setup-node@v5
         with:
-          node-version: 24
+          node-version: 22
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v6
+        uses: actions/checkout@v5
         with:
           submodules: true
 

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.4
+      ref: v1.7.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.495
-    - renovate@42.30.4
-    - prettier@3.7.4
-    - trufflehog@3.91.2
+    - checkov@3.2.473
+    - renovate@41.132.5
+    - prettier@3.6.2
+    - trufflehog@3.90.8
     - yamllint@1.37.1
-    - bandit@1.9.2
-    - trivy@0.67.2
+    - bandit@1.8.6
+    - trivy@0.67.0
     - taplo@0.10.0
-    - ruff@0.14.7
-    - isort@7.0.0
-    - markdownlint@0.46.0
+    - ruff@0.13.2
+    - isort@6.1.0
+    - markdownlint@0.45.0
     - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.9
+    - actionlint@1.7.7
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.11.0
+    - black@25.9.0
     - git-diff-check
-    - gitleaks@8.30.0
+    - gitleaks@8.28.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

Dockerfile

@@ -3,7 +3,7 @@
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.14-slim-trixie AS builder
+FROM python:3.13-slim-trixie AS builder
 ARG PIO_ENV=native
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC

README.md

@@ -37,3 +37,4 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
+

alpine.Dockerfile

@@ -3,13 +3,12 @@
 # trunk-ignore-all(hadolint/DL3018): Do not pin apk package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
 
-FROM python:3.14-alpine3.22 AS builder
+FROM python:3.13-alpine3.22 AS builder
 ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
 
 RUN apk --no-cache add \
-        bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
-        libgpiod-dev yaml-cpp-dev bluez-dev \
+        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
         libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
@@ -28,7 +27,7 @@ RUN bash ./bin/build-native.sh "$PIO_ENV" && \
 
 # ##### PRODUCTION BUILD #############
 
-FROM alpine:3.23
+FROM alpine:3.22
 LABEL org.opencontainers.image.title="Meshtastic" \
       org.opencontainers.image.description="Alpine Meshtastic daemon" \
       org.opencontainers.image.url="https://meshtastic.org" \
@@ -41,8 +40,8 @@ LABEL org.opencontainers.image.title="Meshtastic" \
 USER root
 
 RUN apk --no-cache add \
-        shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
-        i2c-tools libuv libx11 libinput libxkbcommon \
+        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
+        libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

arch/esp32/esp32.ini

@@ -2,16 +2,10 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-custom_mtjson_part =
 platform =
   # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
   platformio/espressif32@6.11.0
 
-extra_scripts =
-  ${env.extra_scripts}
-  pre:extra_scripts/esp32_pre.py
-  extra_scripts/esp32_extra.py
-
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
@@ -37,7 +31,6 @@ build_flags =
   -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
   -DAXP_DEBUG_PORT=Serial
   -DCONFIG_BT_NIMBLE_ENABLED
-  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
   -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
@@ -63,7 +56,7 @@ lib_deps =
   # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
   https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
   # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.0.zip
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/esp32/esp32c6.ini

@@ -28,7 +28,7 @@ lib_deps =
   ${environmental_extra.lib_deps}
   ${radiolib_base.lib_deps}
   # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
+  lewisxhe/XPowersLib@0.3.0
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto

arch/nrf52/nrf52.ini

@@ -7,17 +7,13 @@ extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
   ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 
-extra_scripts =
-  ${env.extra_scripts}
-  extra_scripts/nrf52_extra.py
-
-build_type = release
+build_type = debug
 build_flags =
-  -include variants/nrf52840/cpp_overrides/lfs_util.h
+  -include arch/nrf52/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
@@ -25,17 +21,6 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
   -DMESHTASTIC_EXCLUDE_AUDIO=1
   -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -Os
-build_unflags =
-  -Ofast
-  -Og
-  -ggdb3
-  -ggdb2
-  -g3
-  -g2
-  -g
-  -g1
-  -g0
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>

arch/nrf52/nrf52840.ini

@@ -8,7 +8,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/f566d364204416cdbf298e349213f7d551f793d9.zip
+  https://github.com/meshtastic/platform-native/archive/d3f6e339534233c7217818867368767590ce549e.zip
 framework = arduino
 
 build_src_filter = 

arch/stm32/stm32.ini

@@ -2,13 +2,13 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.4.0
+  platformio/ststm32@19.3.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
 extra_scripts =
   ${env.extra_scripts}
-  extra_scripts/stm32_extra.py
+  post:extra_scripts/extra_stm32.py
 
 build_type = release
 
@@ -37,9 +37,6 @@ build_flags =
   -DRADIOLIB_EXCLUDE_LR11X0=1
   -DHAL_DAC_MODULE_ONLY
   -DHAL_RNG_MODULE_ENABLED
-  -Wl,--wrap=__assert_func
-  -Wl,--wrap=strerror
-  -Wl,--wrap=_tzset_unlocked_r
 
 build_src_filter =
   ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>

bin/analyze_map.py

@@ -1,165 +0,0 @@
-#!/usr/bin/env python3
-"""Summarise linker map output to highlight heavy object files and libraries.
-
-Usage:
-    python bin/analyze_map.py --map .pio/build/rak4631/output.map --top 20
-
-The script parses GNU ld map files and aggregates section sizes per object file
-and per archive/library, then prints sortable tables that make it easy to spot
-modules worth trimming or hiding behind feature flags.
-"""
-from __future__ import annotations
-
-import argparse
-import collections
-import os
-import re
-import sys
-from typing import DefaultDict, Dict, Tuple
-
-
-SECTION_LINE_RE = re.compile(r"^\s+(?P<section>\S+)\s+0x[0-9A-Fa-f]+\s+0x(?P<size>[0-9A-Fa-f]+)\s+(?P<object>.+)$")
-ARCHIVE_MEMBER_RE = re.compile(r"^(?P<archive>.+)\((?P<object>[^)]+)\)$")
-
-
-def human_size(num_bytes: int) -> str:
-    """Return a friendly size string with one decimal place."""
-    if num_bytes < 1024:
-        return f"{num_bytes:,} B"
-    num = float(num_bytes)
-    for unit in ("KB", "MB", "GB"):
-        num /= 1024.0
-        if num < 1024.0:
-            return f"{num:.1f} {unit}"
-    return f"{num:.1f} TB"
-
-
-def shorten_path(path: str, root: str) -> str:
-    """Prefer repository-relative paths for readability."""
-    path = path.strip()
-    if not path:
-        return path
-
-    # Normalise Windows archives (backslashes) to POSIX style for consistency.
-    path = path.replace("\\", "/")
-
-    # Attempt to strip the root when an absolute path lives inside the repo.
-    if os.path.isabs(path):
-        try:
-            rel = os.path.relpath(path, root)
-            if not rel.startswith(".."):
-                return rel
-        except ValueError:
-            # relpath can fail on mixed drives on Windows; fall back to basename.
-            pass
-    return path
-
-
-def describe_object(raw_object: str, root: str) -> Tuple[str, str]:
-    """Return a human friendly object label and the library it belongs to."""
-    raw_object = raw_object.strip()
-    lib_label = "[app]"
-    match = ARCHIVE_MEMBER_RE.match(raw_object)
-    if match:
-        archive = shorten_path(match.group("archive"), root)
-        obj = match.group("object")
-        lib_label = os.path.basename(archive) or archive
-        label = f"{archive}:{obj}"
-    else:
-        label = shorten_path(raw_object, root)
-        # If the object lives under libs, hint at the containing directory.
-        parent = os.path.basename(os.path.dirname(label))
-        if parent:
-            lib_label = parent
-    return label, lib_label
-
-
-def parse_map(map_path: str, repo_root: str) -> Tuple[Dict[str, int], Dict[str, int], Dict[str, Dict[str, int]]]:
-    per_object: DefaultDict[str, int] = collections.defaultdict(int)
-    per_library: DefaultDict[str, int] = collections.defaultdict(int)
-    per_object_sections: DefaultDict[str, DefaultDict[str, int]] = collections.defaultdict(lambda: collections.defaultdict(int))
-
-    try:
-        with open(map_path, "r", encoding="utf-8", errors="ignore") as handle:
-            for line in handle:
-                match = SECTION_LINE_RE.match(line)
-                if not match:
-                    continue
-
-                section = match.group("section")
-                if section.startswith("*") or section in {"LOAD", "ORIGIN"}:
-                    continue
-
-                size = int(match.group("size"), 16)
-                if size == 0:
-                    continue
-
-                obj_token = match.group("object").strip()
-                if not obj_token or obj_token.startswith("*") or "load address" in obj_token:
-                    continue
-
-                label, lib_label = describe_object(obj_token, repo_root)
-                per_object[label] += size
-                per_library[lib_label] += size
-                per_object_sections[label][section] += size
-    except FileNotFoundError:
-        raise SystemExit(f"error: map file '{map_path}' not found. Run a build first.")
-
-    return per_object, per_library, per_object_sections
-
-
-def format_section_breakdown(section_sizes: Dict[str, int], total: int, limit: int = 3) -> str:
-    items = sorted(section_sizes.items(), key=lambda kv: kv[1], reverse=True)
-    parts = []
-    for section, size in items[:limit]:
-        pct = (size / total) * 100 if total else 0
-        parts.append(f"{section} {pct:.1f}%")
-    if len(items) > limit:
-        remainder = total - sum(size for _, size in items[:limit])
-        pct = (remainder / total) * 100 if total else 0
-        parts.append(f"other {pct:.1f}%")
-    return ", ".join(parts)
-
-
-def print_report(map_path: str, top_n: int, per_object: Dict[str, int], per_library: Dict[str, int], per_object_sections: Dict[str, Dict[str, int]]):
-    total_bytes = sum(per_object.values())
-    if total_bytes == 0:
-        print("No section data found in map file.")
-        return
-
-    print(f"Map file: {map_path}")
-    print(f"Accounted size: {human_size(total_bytes)} across {len(per_object)} object files\n")
-
-    sorted_objects = sorted(per_object.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_objects))} object files by linked size:")
-    for idx, (obj, size) in enumerate(sorted_objects[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        breakdown = format_section_breakdown(per_object_sections[obj], size)
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)")
-        print(f"    {obj}")
-        if breakdown:
-            print(f"    sections: {breakdown}")
-    print()
-
-    sorted_libs = sorted(per_library.items(), key=lambda kv: kv[1], reverse=True)
-    print(f"Top {min(top_n, len(sorted_libs))} libraries or source roots:")
-    for idx, (lib, size) in enumerate(sorted_libs[:top_n], 1):
-        pct = (size / total_bytes) * 100
-        print(f"{idx:2}. {human_size(size):>9}  ({size:,} B, {pct:5.2f}% of linked size)  {lib}")
-
-
-def main() -> None:
-    parser = argparse.ArgumentParser(description="Highlight heavy object files from a GNU ld map file.")
-    parser.add_argument("--map", default=".pio/build/rak4631/output.map", help="Path to the map file (default: %(default)s)")
-    parser.add_argument("--top", type=int, default=20, help="Number of entries to display per table (default: %(default)s)")
-    args = parser.parse_args()
-
-    map_path = os.path.abspath(args.map)
-    repo_root = os.path.abspath(os.getcwd())
-
-    per_object, per_library, per_object_sections = parse_map(map_path, repo_root)
-    print_report(os.path.relpath(map_path, repo_root), args.top, per_object, per_library, per_object_sections)
-
-
-if __name__ == "__main__":
-    main()

bin/build-esp32.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,7 +14,7 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
@@ -23,14 +22,16 @@ export APP_VERSION=$VERSION
 basename=firmware-$1-$VERSION
 
 pio run --environment $1 # -v
-
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
 echo "Copying ESP32 bin file"
-cp $BUILDDIR/$basename.factory.bin $OUTDIR/$basename.factory.bin
+SRCBIN=.pio/build/$1/firmware.factory.bin
+cp $SRCBIN $OUTDIR/$basename.bin
 
 echo "Copying ESP32 update bin file"
-cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
 # If you want to build the webui, uncomment the following lines
@@ -39,13 +40,7 @@ echo "Building Filesystem for ESP32 targets"
 # # Remove webserver files from the filesystem and rebuild
 # ls -l data/static # Diagnostic list of files
 # rm -rf data/static
-pio run --environment $1 -t buildfs --disable-auto-clean
-cp $BUILDDIR/littlefs-$1-$VERSION.bin $OUTDIR/littlefs-$1-$VERSION.bin
-cp bin/device-install.* $OUTDIR/
-cp bin/device-update.* $OUTDIR/
-
-# Generate the manifest file
-echo "Generating Meshtastic manifest"
-TIMEFORMAT="Generated manifest in %E seconds"
-time pio run --environment $1 -t mtjson --silent --disable-auto-clean
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$1-$VERSION.bin
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -17,19 +17,15 @@ VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 PIO_ENV=${1:-native}
 
-BUILDDIR=.pio/build/$PIO_ENV
-OUTDIR=release
+OUTDIR=release/
 
-rm -f $OUTDIR/meshtasticd*
+rm -f $OUTDIR/firmware*
 
 mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
-basename=meshtasticd-$1-$VERSION
-
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
 pio pkg install --environment "$PIO_ENV" || platformioFailed
 pio run --environment "$PIO_ENV" || platformioFailed
-
-cp "$BUILDDIR/meshtasticd" "$OUTDIR/meshtasticd_linux_$(uname -m)"
-cp bin/native-install.* $OUTDIR/
+cp ".pio/build/$PIO_ENV/program" "$OUTDIR/meshtasticd_linux_$(uname -m)"
+cp bin/native-install.* $OUTDIR

bin/build-nrf52.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,7 +14,7 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
@@ -23,32 +22,32 @@ export APP_VERSION=$VERSION
 basename=firmware-$1-$VERSION
 
 pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+echo "Generating NRF52 dfu file"
+DFUPKG=.pio/build/$1/firmware.zip
+cp $DFUPKG $OUTDIR/$basename-ota.zip
 
-echo "Copying NRF52 dfu (OTA) file"
-cp $BUILDDIR/$basename.zip $OUTDIR/$basename.zip
+echo "Generating NRF52 uf2 file"
+SRCHEX=.pio/build/$1/firmware.hex
 
-echo "Copying NRF52 UF2 file"
-cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
-cp bin/*.uf2 $OUTDIR/
-
-SRCHEX=$BUILDDIR/$basename.hex
-
-# if WM1110 target, copy the merged.hex
+# if WM1110 target, merge hex with softdevice 7.3.0
 if (echo $1 | grep -q "wio-sdk-wm1110"); then
-	echo "Copying .merged.hex file"
-	SRCHEX=$BUILDDIR/$basename.merged.hex
-	cp $SRCHEX $OUTDIR/
+	echo "Merging with softdevice"
+	bin/mergehex -m bin/s140_nrf52_7.3.0_softdevice.hex $SRCHEX -o .pio/build/$1/$basename.hex
+	SRCHEX=.pio/build/$1/$basename.hex
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp $SRCHEX $OUTDIR
+	cp bin/*.uf2 $OUTDIR
+else
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp bin/device-install.* $OUTDIR
+	cp bin/device-update.* $OUTDIR
+	cp bin/*.uf2 $OUTDIR
 fi
 
 if (echo $1 | grep -q "rak4631"); then
-	echo "Copying .hex file"
-	cp $SRCHEX $OUTDIR/
-fi
-
-# Generate the manifest file
-echo "Generating Meshtastic manifest"
-TIMEFORMAT="Generated manifest in %E seconds"
-time pio run --environment $1 -t mtjson --silent --disable-auto-clean
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+	echo "Copying hex file"
+	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
+fi

bin/build-rp2xx0.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,7 +14,7 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
@@ -23,14 +22,12 @@ export APP_VERSION=$VERSION
 basename=firmware-$1-$VERSION
 
 pio run --environment $1 # -v
-
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
 echo "Copying uf2 file"
-cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
+SRCBIN=.pio/build/$1/firmware.uf2
+cp $SRCBIN $OUTDIR/$basename.uf2
 
-# Generate the manifest file
-echo "Generating Meshtastic manifest"
-TIMEFORMAT="Generated manifest in %E seconds"
-time pio run --environment $1 -t mtjson --silent --disable-auto-clean
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-stm32wl.sh

@@ -5,8 +5,7 @@ set -e
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
-BUILDDIR=.pio/build/$1
-OUTDIR=release
+OUTDIR=release/
 
 rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
@@ -15,7 +14,7 @@ rm -r $OUTDIR/* || true
 platformio pkg install -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f $BUILDDIR/firmware*
+rm -f .pio/build/$1/firmware.*
 
 # The shell vars the build tool expects to find
 export APP_VERSION=$VERSION
@@ -23,14 +22,8 @@ export APP_VERSION=$VERSION
 basename=firmware-$1-$VERSION
 
 pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
 
-cp $BUILDDIR/$basename.elf $OUTDIR/$basename.elf
-
-echo "Copying STM32 bin file"
-cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
-
-# Generate the manifest file
-echo "Generating Meshtastic manifest"
-TIMEFORMAT="Generated manifest in %E seconds"
-time pio run --environment $1 -t mtjson --silent --disable-auto-clean
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename.bin

bin/device-install.bat

@@ -5,14 +5,22 @@ TITLE Meshtastic device-install
 SET "SCRIPT_NAME=%~nx0"
 SET "DEBUG=0"
 SET "PYTHON="
+SET "TFT_BUILD=0"
+SET "BIGDB8=0"
+SET "MUIDB8=0"
+SET "BIGDB16=0"
 SET "ESPTOOL_BAUD=115200"
 SET "ESPTOOL_CMD="
 SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
-@REM Default offsets.
-@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
-SET "OTA_OFFSET=0x260000"
-SET "SPIFFS_OFFSET=0x300000"
+
+@REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
+SET "C3=esp32c3"
+@REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
+SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
+SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
 
 GOTO getopts
 :help
@@ -21,7 +29,7 @@ ECHO.
 ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] [--1200bps-reset]
 ECHO.
 ECHO Options:
-ECHO     -f filename      The firmware .factory.bin file to flash.  Custom to your device type and region. (required)
+ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
 ECHO                      The file must be located in this current directory.
 ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
 ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
@@ -32,12 +40,12 @@ ECHO     --1200bps-reset  Attempt to place the device in correct mode. (1200bps
 ECHO                      Some hardware requires this twice.
 ECHO.
 ECHO Example: %SCRIPT_NAME% -p COM17 --1200bps-reset
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.factory.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.factory.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.7.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -70,8 +78,8 @@ IF "__!FILENAME!__"=="____" (
         CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
         GOTO help
     )
-    IF NOT "__!FILENAME:.factory.bin=!__"=="__!FILENAME!__" (
-        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-*.factory.bin file."
+    IF "__!FILENAME:firmware-=!__"=="__!FILENAME!__" (
+        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-* file."
         GOTO help
     )
     @REM Remove ".\" or "./" file prefix if present.
@@ -85,26 +93,12 @@ IF NOT EXIST !FILENAME! (
     GOTO eof
 )
 
-CALL :LOG_MESSAGE DEBUG "Checking for metadata..."
-@REM Derive metadata filename from firmware filename.
-SET "METAFILE=!FILENAME:.factory.bin=!.mt.json"
-IF EXIST !METAFILE! (
-    @REM Print parsed json with powershell
-    CALL :LOG_MESSAGE INFO "Firmware metadata: !METAFILE!"
-    powershell -NoProfile -Command "(Get-Content '!METAFILE!' | ConvertFrom-Json | Out-String).Trim()"
-
-    @REM Save metadata values to variables for later use.
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).mcu"`) DO SET "MCU=%%A"
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).part | Where-Object { $_.subtype -eq 'ota_1' } | Select-Object -ExpandProperty offset"`
-    ) DO SET "OTA_OFFSET=%%A"
-    FOR /f "usebackq" %%A IN (`powershell -NoProfile -Command ^
-        "(Get-Content '!METAFILE!' | ConvertFrom-Json).part | Where-Object { $_.subtype -eq 'spiffs' } | Select-Object -ExpandProperty offset"`
-    ) DO SET "SPIFFS_OFFSET=%%A"
-) ELSE (
-    CALL :LOG_MESSAGE ERROR "No metadata file found: !METAFILE!"
+IF NOT "!FILENAME:update=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
+    CALL :LOG_MESSAGE INFO "Use script device-update.bat to flash update !FILENAME!."
     GOTO eof
+) ELSE (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
 )
 
 :skip-filename
@@ -114,7 +108,7 @@ IF NOT "__%PYTHON%__"=="____" (
     SET "ESPTOOL_CMD=!PYTHON! -m esptool"
     CALL :LOG_MESSAGE DEBUG "Python interpreter supplied."
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool..."
+    CALL :LOG_MESSAGE DEBUG "Python interpreter NOT supplied. Looking for esptool...
     WHERE esptool >nul 2>&1
     IF %ERRORLEVEL% EQU 0 (
         @REM WHERE exits with code 0 if esptool is found.
@@ -152,26 +146,100 @@ IF %BPS_RESET% EQU 1 (
     GOTO eof
 )
 
-@REM Extract PROGNAME from %FILENAME% for later use.
-SET "PROGNAME=!FILENAME:.factory.bin=!"
-CALL :LOG_MESSAGE DEBUG "Computed PROGNAME: !PROGNAME!"
-
-IF "__!MCU!__" == "__esp32s3__" (
-    @REM We are working with ESP32-S3
-    SET "OTA_FILENAME=bleota-s3.bin"
-) ELSE IF "__!MCU!__" == "__esp32c3__" (
-    @REM We are working with ESP32-C3
-    SET "OTA_FILENAME=bleota-c3.bin"
+@REM Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+@REM https://github.com/meshtastic/web-flasher/blob/main/types/resources.ts#L3
+IF NOT "!FILENAME:-tft-=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are working with a *-tft-* file. !FILENAME!"
+    SET "TFT_BUILD=1"
 ) ELSE (
-    @REM Everything else
-    SET "OTA_FILENAME=bleota.bin"
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *-tft-* file. !FILENAME!"
 )
+
+FOR %%a IN (%BIGDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_8MB%.
+        SET "BIGDB8=1"
+        GOTO end_loop_bigdb_8mb
+    )
+)
+:end_loop_bigdb_8mb
+
+FOR %%a IN (%MUIDB_8MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %MUIDB_8MB%.
+        SET "MUIDB8=1"
+        GOTO end_loop_muidb_8mb
+    )
+)
+:end_loop_muidb_8mb
+
+FOR %%a IN (%BIGDB_16MB%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %BIGDB_16MB%.
+        SET "BIGDB16=1"
+        GOTO end_loop_bigdb_16mb
+    )
+)
+:end_loop_bigdb_16mb
+
+IF %BIGDB8% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 8mb partition selected."
+IF %MUIDB8% EQU 1 CALL :LOG_MESSAGE INFO "MUIDB 8mb partition selected."
+IF %BIGDB16% EQU 1 CALL :LOG_MESSAGE INFO "BigDB 16mb partition selected."
+
+@REM Extract BASENAME from %FILENAME% for later use.
+SET "BASENAME=!FILENAME:firmware-=!"
+CALL :LOG_MESSAGE DEBUG "Computed firmware basename: !BASENAME!"
+
+@REM Account for S3 and C3 board's different OTA partition.
+FOR %%a IN (%S3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %S3%.
+        SET "OTA_FILENAME=bleota-s3.bin"
+        GOTO :end_loop_s3
+    )
+)
+
+FOR %%a IN (%C3%) DO (
+    IF NOT "!FILENAME:%%a=!"=="!FILENAME!" (
+        @REM We are working with any of %C3%.
+        SET "OTA_FILENAME=bleota-c3.bin"
+        GOTO :end_loop_c3
+    )
+)
+
+@REM Everything else
+SET "OTA_FILENAME=bleota.bin"
+:end_loop_s3
+:end_loop_c3
 CALL :LOG_MESSAGE DEBUG "Set OTA_FILENAME to: !OTA_FILENAME!"
 
 @REM Set SPIFFS filename with "littlefs-" prefix.
-SET "SPIFFS_FILENAME=littlefs-!PROGNAME:firmware-=!.bin"
+SET "SPIFFS_FILENAME=littlefs-%BASENAME%"
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_FILENAME to: !SPIFFS_FILENAME!"
 
+@REM Default offsets.
+@REM https://github.com/meshtastic/web-flasher/blob/main/stores/firmwareStore.ts#L202
+SET "OTA_OFFSET=0x260000"
+SET "SPIFFS_OFFSET=0x300000"
+
+@REM Offsets for BigDB 8mb.
+IF %BIGDB8% EQU 1 (
+    SET "OTA_OFFSET=0x340000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
+@REM Offsets for MUIDB 8mb.
+IF %MUIDB8% EQU 1 (
+    SET "OTA_OFFSET=0x5D0000"
+    SET "SPIFFS_OFFSET=0x670000"
+)
+
+@REM Offsets for BigDB 16mb.
+IF %BIGDB16% EQU 1 (
+    SET "OTA_OFFSET=0x650000"
+    SET "SPIFFS_OFFSET=0xc90000"
+)
+
 CALL :LOG_MESSAGE DEBUG "Set OTA_OFFSET to: !OTA_OFFSET!"
 CALL :LOG_MESSAGE DEBUG "Set SPIFFS_OFFSET to: !SPIFFS_OFFSET!"
 

bin/device-install.sh

@@ -2,15 +2,67 @@
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 BPS_RESET=false
+TFT_BUILD=false
 MCU=""
 
 # Constants
 RESET_BAUD=1200
 FIRMWARE_OFFSET=0x00
-# Default littlefs* offset.
-OFFSET=0x300000
-# Default OTA Offset
-OTA_OFFSET=0x260000
+
+# Variant groups
+BIGDB_8MB=(
+    "crowpanel-esp32s3"
+    "heltec_capsule_sensor_v3"
+    "heltec-v3"
+    "heltec-vision-master-e213"
+    "heltec-vision-master-e290"
+    "heltec-vision-master-t190"
+    "heltec-wireless-paper"
+    "heltec-wireless-tracker"
+    "heltec-wsl-v3"
+    "icarus"
+    "seeed-xiao-s3"
+    "tbeam-s3-core"
+    "tracksenger"
+)
+MUIDB_8MB=(
+    "picomputer-s3"
+    "unphone"
+    "seeed-sensecap-indicator"
+)
+BIGDB_16MB=(
+    "t-deck"
+    "mesh-tab"
+    "t-energy-s3"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "m5stack-cores3"
+    "station-g2"
+    "t-eth-elite"
+    "tlora-pager"
+    "t-watch-s3"
+    "elecrow-adv"
+)
+S3_VARIANTS=(
+    "s3"
+    "-v3"
+    "t-deck"
+    "wireless-paper"
+    "wireless-tracker"
+    "station-g2"
+    "unphone"
+    "t-eth-elite"
+    "tlora-pager"
+    "mesh-tab"
+    "dreamcatcher"
+    "ESP32-S3-Pico"
+    "seeed-sensecap-indicator"
+    "heltec_capsule_sensor_v3"
+    "vision-master"
+    "icarus"
+    "tracksenger"
+    "elecrow-adv"
+)
 
 # Determine the correct esptool command to use
 if "$PYTHON" -m esptool version >/dev/null 2>&1; then
@@ -24,14 +76,6 @@ else
     exit 1
 fi
 
-# Check for jq
-if ! command -v jq >/dev/null 2>&1; then
-    echo "Error: jq not found" >&2
-    echo "Install jq with your package manager." >&2
-    echo "e.g. 'apt install jq', 'dnf install jq', 'brew install jq', etc." >&2
-    exit 1
-fi
-
 set -e
 
 # Usage info
@@ -43,7 +87,7 @@ Flash image file to device, but first erasing and writing system information.
     -h               Display this help and exit.
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The firmware *.factory.bin file to flash.  Custom to your device type and region.
+    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
     --1200bps-reset  Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
@@ -92,43 +136,69 @@ fi
     shift
 }
 
-if [[ $(basename "$FILENAME") != firmware-*.factory.bin ]]; then
-  echo "Filename must be a firmware-*.factory.bin file."
+if [[ "$FILENAME" != firmware-* ]]; then
+  echo "Filename must be a firmware-* file."
   exit 1
 fi
 
-# Extract PROGNAME from %FILENAME% for later use.
-PROGNAME="${FILENAME/.factory.bin/}"
-# Derive metadata filename from %PROGNAME%.
-METAFILE="${PROGNAME}.mt.json"
+# Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
+if [[ "${FILENAME//-tft-/}" != "$FILENAME" ]]; then
+    TFT_BUILD=true
+fi
 
-if [[ -f "$FILENAME" && "$FILENAME" == *.factory.bin ]]; then
-    # Display metadata if it exists
-    if [[ -f "$METAFILE" ]]; then
-        echo "Firmware metadata: ${METAFILE}"
-        jq . "$METAFILE"
-        # Extract relevant fields from metadata
-        if [[ $(jq -r '.part' "$METAFILE") != "null" ]]; then
-            OTA_OFFSET=$(jq -r '.part[] | select(.subtype == "ota_1") | .offset' "$METAFILE")
-            SPIFFS_OFFSET=$(jq -r '.part[] | select(.subtype == "spiffs") | .offset' "$METAFILE")
+# Extract BASENAME from %FILENAME% for later use.
+BASENAME="${FILENAME/firmware-/}"
+
+if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
+    # Default littlefs* offset.
+    OFFSET=0x300000
+
+    # Default OTA Offset
+    OTA_OFFSET=0x260000
+
+    # littlefs* offset for BigDB 8mb and OTA OFFSET.
+    for variant in "${BIGDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x340000
         fi
-        MCU=$(jq -r '.mcu' "$METAFILE")
-    else
-        echo "ERROR: No metadata file found at ${METAFILE}"
-        exit 1
-    fi
+    done
 
-    # Determine OTA filename based on MCU type
-    if [ "$MCU" == "esp32s3" ]; then
-        OTAFILE=bleota-s3.bin
-    elif [ "$MCU" == "esp32c3" ]; then
-        OTAFILE=bleota-c3.bin
+    for variant in "${MUIDB_8MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0x670000
+            OTA_OFFSET=0x5D0000
+        fi
+    done
+
+    # littlefs* offset for BigDB 16mb and OTA OFFSET.
+    for variant in "${BIGDB_16MB[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            OFFSET=0xc90000
+            OTA_OFFSET=0x650000
+        fi
+    done
+
+    # Account for S3 board's different OTA partition
+    # FIXME: Use PlatformIO info to determine MCU type, this is unmaintainable
+    for variant in "${S3_VARIANTS[@]}"; do
+        if [ -z "${FILENAME##*"$variant"*}" ]; then
+            MCU="esp32s3"
+        fi
+    done
+
+    if [ "$MCU" != "esp32s3" ]; then
+        if [ -n "${FILENAME##*"esp32c3"*}" ]; then
+            OTAFILE=bleota.bin
+        else
+            OTAFILE=bleota-c3.bin
+        fi
     else
-        OTAFILE=bleota.bin
+        OTAFILE=bleota-s3.bin
     fi
 
     # Set SPIFFS filename with "littlefs-" prefix.
-    SPIFFSFILE="littlefs-${PROGNAME/firmware-/}.bin"
+    SPIFFSFILE=littlefs-${BASENAME}
 
     if [[ ! -f "$FILENAME" ]]; then
         echo "Error: file ${FILENAME} wasn't found. Terminating."

bin/device-update.bat

@@ -30,11 +30,11 @@ ECHO     --change-mode    Attempt to place the device in correct mode. (1200bps
 ECHO                      Some hardware requires this twice.
 ECHO.
 ECHO Example: %SCRIPT_NAME% -p COM17 --change-mode
-ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
+ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4-update.bin -p COM11
 GOTO eof
 
 :version
-ECHO %SCRIPT_NAME% [Version 2.7.0]
+ECHO %SCRIPT_NAME% [Version 2.6.2]
 ECHO Meshtastic
 GOTO eof
 
@@ -78,12 +78,12 @@ IF NOT EXIST !FILENAME! (
     GOTO eof
 )
 
-IF NOT "__!FILENAME:.factory.bin=!__"=="__!FILENAME!__" (
-    CALL :LOG_MESSAGE DEBUG "We are working with a *.factory.bin* file. !FILENAME!"
+IF "!FILENAME:update=!"=="!FILENAME!" (
+    CALL :LOG_MESSAGE DEBUG "We are NOT working with a *update* file. !FILENAME!"
     CALL :LOG_MESSAGE INFO "Use script device-install.bat to flash !FILENAME!."
     GOTO eof
 ) ELSE (
-    CALL :LOG_MESSAGE DEBUG "We are not working with a *.factory.bin* file. !FILENAME!"
+    CALL :LOG_MESSAGE DEBUG "We are working with a *update* file. !FILENAME!"
 )
 
 :skip-filename

bin/device-update.sh

@@ -29,7 +29,7 @@ Flash image file to device, leave existing system intact."
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The *.bin file to flash.  Custom to your device type.
+    -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     --change-mode    Attempt to place the device in correct mode. Some hardware requires this twice. (1200bps Reset)
 
 EOF
@@ -78,7 +78,7 @@ fi
     shift
 }
 
-if [[ -f "$FILENAME" && "$FILENAME" != *.factory.bin ]]; then
+if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
     $ESPTOOL_CMD --baud $FLASH_BAUD write-flash $UPDATE_OFFSET "${FILENAME}"
 else

bin/exception_decoder.py

@@ -75,7 +75,7 @@ TOOLS = {
 }
 
 BACKTRACE_REGEX = re.compile(
-    r"\b(0x4[0-9a-fA-F]{7,8}):0x[0-9a-fA-F]{8}\b"
+    r"(?:\s+(0x40[0-2](?:\d|[a-f]|[A-F]){5}):0x(?:\d|[a-f]|[A-F]){8})\b"
 )
 EXCEPTION_REGEX = re.compile("^Exception \\((?P<exc>[0-9]*)\\):$")
 COUNTER_REGEX = re.compile(
@@ -89,7 +89,7 @@ POINTER_REGEX = re.compile(
 STACK_BEGIN = ">>>stack>>>"
 STACK_END = "<<<stack<<<"
 STACK_REGEX = re.compile(
-    r"^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
+    "^(?P<off>[0-9a-f]+):\W+(?P<c1>[0-9a-f]+) (?P<c2>[0-9a-f]+) (?P<c3>[0-9a-f]+) (?P<c4>[0-9a-f]+)(\W.*)?$"
 )
 
 StackLine = namedtuple("StackLine", ["offset", "content"])
@@ -223,7 +223,7 @@ class AddressResolver(object):
             if match is None:
                 if last is not None and line.startswith("(inlined by)"):
                     line = line[12:].strip()
-                    self._address_map[last] += "\n  \\-> inlined by: " + line
+                    self._address_map[last] += "\n  \-> inlined by: " + line
                 continue
 
             if match.group("result") == "?? ??:0":

bin/kill-github-actions.sh

@@ -1,116 +0,0 @@
-#!/bin/bash
-
-# Script to cancel all running GitHub Actions workflows
-# Requires GitHub CLI (gh) to be installed and authenticated
-
-set -e
-
-# Colors for output
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-NC='\033[0m' # No Color
-
-# Function to print colored output
-print_status() {
-    echo -e "${GREEN}[INFO]${NC} $1"
-}
-
-print_warning() {
-    echo -e "${YELLOW}[WARN]${NC} $1"
-}
-
-print_error() {
-    echo -e "${RED}[ERROR]${NC} $1"
-}
-
-# Check if gh CLI is installed
-if ! command -v gh &> /dev/null; then
-    print_error "GitHub CLI (gh) is not installed. Please install it first:"
-    echo "  brew install gh"
-    echo "  Or visit: https://cli.github.com/"
-    exit 1
-fi
-
-# Check if authenticated
-if ! gh auth status &> /dev/null; then
-    print_error "GitHub CLI is not authenticated. Please run:"
-    echo "  gh auth login"
-    exit 1
-fi
-
-# Get repository info
-REPO=$(gh repo view --json owner,name -q '.owner.login + "/" + .name')
-if [[ -z "$REPO" ]]; then
-    print_error "Could not determine repository. Make sure you're in a GitHub repository."
-    exit 1
-fi
-
-print_status "Working with repository: $REPO"
-
-# Get all active workflows (both queued and in-progress)
-print_status "Fetching active workflows (queued and in-progress)..."
-QUEUED_WORKFLOWS=$(gh run list --status queued --json databaseId,displayTitle,headBranch,status --limit 100)
-IN_PROGRESS_WORKFLOWS=$(gh run list --status in_progress --json databaseId,displayTitle,headBranch,status --limit 100)
-
-# Combine both lists
-ALL_WORKFLOWS=$(echo "$QUEUED_WORKFLOWS $IN_PROGRESS_WORKFLOWS" | jq -s 'add | unique_by(.databaseId)')
-
-if [[ "$ALL_WORKFLOWS" == "[]" ]]; then
-    print_status "No active workflows found."
-    exit 0
-fi
-
-# Parse and display active workflows
-echo
-print_warning "Found active workflows:"
-echo "$ALL_WORKFLOWS" | jq -r '.[] | "  - \(.displayTitle) (Branch: \(.headBranch), Status: \(.status), ID: \(.databaseId))"'
-
-echo
-read -p "Do you want to cancel ALL these workflows? (y/N): " -n 1 -r
-echo
-
-if [[ ! $REPLY =~ ^[Yy]$ ]]; then
-    print_status "Cancelled by user."
-    exit 0
-fi
-
-# Cancel each workflow
-print_status "Cancelling workflows..."
-CANCELLED_COUNT=0
-FAILED_COUNT=0
-
-while IFS= read -r WORKFLOW_ID; do
-    if [[ -n "$WORKFLOW_ID" ]]; then
-        print_status "Cancelling workflow ID: $WORKFLOW_ID"
-        if gh run cancel "$WORKFLOW_ID" 2>/dev/null; then
-            ((CANCELLED_COUNT++))
-        else
-            print_error "Failed to cancel workflow ID: $WORKFLOW_ID"
-            ((FAILED_COUNT++))
-        fi
-    fi
-done < <(echo "$ALL_WORKFLOWS" | jq -r '.[].databaseId')
-
-echo
-print_status "Summary:"
-echo "  - Cancelled: $CANCELLED_COUNT workflows"
-if [[ $FAILED_COUNT -gt 0 ]]; then
-    echo "  - Failed: $FAILED_COUNT workflows"
-fi
-
-print_status "Done!"
-
-# Optional: Show remaining active workflows
-echo
-print_status "Checking for any remaining active workflows..."
-REMAINING_QUEUED=$(gh run list --status queued --json databaseId --limit 10)
-REMAINING_IN_PROGRESS=$(gh run list --status in_progress --json databaseId --limit 10)
-REMAINING_ALL=$(echo "$REMAINING_QUEUED $REMAINING_IN_PROGRESS" | jq -s 'add | unique_by(.databaseId)')
-
-if [[ "$REMAINING_ALL" == "[]" ]]; then
-    print_status "All workflows successfully cancelled."
-else
-    REMAINING_COUNT=$(echo "$REMAINING_ALL" | jq '. | length')
-    print_warning "Still $REMAINING_COUNT workflows active (may take a moment to update status)"
-fi

bin/native-gdbserver.sh

@@ -2,4 +2,4 @@
 
 set -e
 pio run --environment native
-gdbserver --once localhost:2345 .pio/build/native/meshtasticd "$@"
+gdbserver --once localhost:2345 .pio/build/native/program "$@"

bin/native-run.sh

@@ -2,4 +2,4 @@
 
 set -e
 pio run --environment native
-.pio/build/native/meshtasticd "$@"
+.pio/build/native/program "$@"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,21 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.17" date="2025-11-28">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
-    </release>
-    <release version="2.7.16" date="2025-11-19">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.16</url>
-    </release>
-    <release version="2.7.15" date="2025-11-13">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
-    </release>
-    <release version="2.7.14" date="2025-11-03">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.14</url>
-    </release>
-    <release version="2.7.13" date="2025-10-11">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.13</url>
-    </release>
     <release version="2.7.12" date="2025-10-01">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.12</url>
     </release>

bin/platformio-custom.py

@@ -2,77 +2,98 @@
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
-from os.path import join, basename, isfile
+from os.path import join
 import subprocess
 import json
 import re
+import time
 from datetime import datetime
 
 from readprops import readProps
 
 Import("env")
 platform = env.PioPlatform()
-progname = env.get("PROGNAME")
-lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
 
-def manifest_gather(source, target, env):
-    out = []
-    check_paths = [
-        progname,
-        f"{progname}.elf",
-        f"{progname}.bin",
-        f"{progname}.factory.bin",
-        f"{progname}.hex",
-        f"{progname}.merged.hex",
-        f"{progname}.uf2",
-        f"{progname}.factory.uf2",
-        f"{progname}.zip",
-        lfsbin
+
+def esp32_create_combined_bin(source, target, env):
+    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
+    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
+    print("Generating combined binary for serial flashing")
+
+    app_offset = 0x10000
+
+    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
+    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
+    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
+    chip = env.get("BOARD_MCU")
+    flash_size = env.BoardConfig().get("upload.flash_size")
+    flash_freq = env.BoardConfig().get("build.f_flash", "40m")
+    flash_freq = flash_freq.replace("000000L", "m")
+    flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
+    memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
+    if flash_mode == "qio" or flash_mode == "qout":
+        flash_mode = "dio"
+    if memory_type == "opi_opi" or memory_type == "opi_qspi":
+        flash_mode = "dout"
+    cmd = [
+        "--chip",
+        chip,
+        "merge_bin",
+        "-o",
+        new_file_name,
+        "--flash_mode",
+        flash_mode,
+        "--flash_freq",
+        flash_freq,
+        "--flash_size",
+        flash_size,
     ]
-    for p in check_paths:
-        f = env.File(env.subst(f"$BUILD_DIR/{p}"))
-        if f.exists():
-            d = {
-                "name": p,
-                "md5": f.get_content_hash(), # Returns MD5 hash
-                "bytes": f.get_size() # Returns file size in bytes
-            }
-            out.append(d)
-            print(d)
-    manifest_write(out, env)
 
-def manifest_write(files, env):
-    manifest = {
-        "version": verObj["long"],
-        "build_epoch": build_epoch,
-        "board": env.get("PIOENV"),
-        "mcu": env.get("BOARD_MCU"),
-        "repo": repo_owner,
-        "files": files,
-        "part": None,
-        "has_mui": False,
-        "has_inkhud": False,
-    }
-    # Get partition table (generated in esp32_pre.py) if it exists
-    if env.get("custom_mtjson_part"):
-        # custom_mtjson_part is a JSON string, convert it back to a dict
-        pj = json.loads(env.get("custom_mtjson_part"))
-        manifest["part"] = pj
-    # Enable has_mui for TFT builds
-    if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
-        manifest["has_mui"] = True
-    if "MESHTASTIC_INCLUDE_INKHUD" in env.get("CPPDEFINES", []):
-        manifest["has_inkhud"] = True
+    print("    Offset | File")
+    for section in sections:
+        sect_adr, sect_file = section.split(" ", 1)
+        print(f" -  {sect_adr} | {sect_file}")
+        cmd += [sect_adr, sect_file]
 
-    # Write the manifest to the build directory
-    with open(env.subst("$BUILD_DIR/${PROGNAME}.mt.json"), "w") as f:
-        json.dump(manifest, f, indent=2)
+    print(f" - {hex(app_offset)} | {firmware_name}")
+    cmd += [hex(app_offset), firmware_name]
+
+    print("Using esptool.py arguments: %s" % " ".join(cmd))
+
+    esptool.main(cmd)
+
+
+if platform.name == "espressif32":
+    sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
+    import esptool
+
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
+
+    esp32_kind = env.GetProjectOption("custom_esp32_kind")
+    if esp32_kind == "esp32":
+        # Free up some IRAM by removing auxiliary SPI flash chip drivers.
+        # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
+        env.Append(
+            LINKFLAGS=[
+                "-Wl,--wrap=esp_flash_chip_gd",
+                "-Wl,--wrap=esp_flash_chip_issi",
+                "-Wl,--wrap=esp_flash_chip_winbond",
+            ]
+        )
+    else:
+        # For newer ESP32 targets, using newlib nano works better.
+        env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
+
+if platform.name == "nordicnrf52":
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
+                      env.VerboseAction(f"\"{sys.executable}\" ./bin/uf2conv.py \"$BUILD_DIR/firmware.hex\" -c -f 0xADA52840 -o \"$BUILD_DIR/firmware.uf2\"",
+                                        "Generating UF2 file"))
 
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print(f"Using meshtastic platformio-custom.py, firmware version {verObj['long']} on {env.get('PIOENV')}")
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
 # get repository owner if git is installed
 try:
@@ -118,10 +139,10 @@ flags = [
         "-DBUILD_EPOCH=" + str(build_epoch),
     ] + pref_flags
 
-print("Using flags:")
+print ("Using flags:")
 for flag in flags:
     print(flag)
-
+    
 projenv.Append(
     CCFLAGS=flags,
 )
@@ -160,19 +181,3 @@ def load_boot_logo(source, target, env):
 # Load the boot logo on TFT builds
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
     env.AddPreAction('$BUILD_DIR/littlefs.bin', load_boot_logo)
-
-# Rename (mv) littlefs.bin to include the PROGNAME
-# This ensures the littlefs.bin is named consistently with the firmware
-env.AddPostAction('$BUILD_DIR/littlefs.bin', env.VerboseAction(
-    f'mv $BUILD_DIR/littlefs.bin $BUILD_DIR/{lfsbin}',
-    f'Renaming littlefs.bin to {lfsbin}'
-))
-
-env.AddCustomTarget(
-    name="mtjson",
-    dependencies=None,
-    actions=[manifest_gather],
-    title="Meshtastic Manifest",
-    description="Generating Meshtastic manifest JSON + Checksums",
-    always_build=True,
-)

bin/platformio-pre.py

@@ -1,16 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-Import("env")
-platform = env.PioPlatform()
-
-if platform.name == "native":
-    env.Replace(PROGNAME="meshtasticd")
-else:
-    from readprops import readProps
-    prefsLoc = env["PROJECT_DIR"] + "/version.properties"
-    verObj = readProps(prefsLoc)
-    env.Replace(PROGNAME=f"firmware-{env.get('PIOENV')}-{verObj['long']}")
-
-# Print the new program name for verification
-print(f"PROGNAME: {env.get('PROGNAME')}")

bin/test-simulator.sh

@@ -3,7 +3,7 @@
 set -e
 
 echo "Starting simulator"
-.pio/build/native/meshtasticd -s &
+.pio/build/native/program &
 sleep 20 # 5 seconds was not enough
 
 echo "Simulator started, launching python test..."

bin/web.version

@@ -1 +1 @@
-2.6.7
+2.6.4

boards/ThinkNode-M3.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_eink",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M3",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "elecrow nrf",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "",
-  "vendor": "ELECROW"
-}

boards/ThinkNode-M6.json

@@ -1,53 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M6 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x4405"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"]
-    ],
-    "usb_product": "elecrow_thinknode_m6",
-    "mcu": "nrf52840",
-    "variant": "ELECROW-ThinkNode-M6",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "ELECROW ThinkNode M6",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://www.elecrow.com/thinknode-m6-outdoor-solar-power-for-lora-powered-by-nrf52840-supports-gps.html",
-  "vendor": "ELECROW"
-}

boards/hackaday-communicator.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "hackaday-communicator"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "hackaday-communicator (16 MB FLASH, 8 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 1500000
-  },
-  "url": "hackaday.com",
-  "vendor": "hackaday"
-}

boards/heltec_v4.json

@@ -9,7 +9,7 @@
     "extra_flags": [
       "-DBOARD_HAS_PSRAM",
       "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
       "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],

boards/muzi-base.json

@@ -1,56 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_MUZI_BASE -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [["0x239A", "0xcafe"]],
-    "mcu": "nrf52840",
-    "variant": "muzi-base",
-    "variants_dir": "variants",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B6"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "Muzi Base",
-  "url": "https://muzi.works/",
-  "vendor": "MuziWorks",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "blackmagic",
-      "cmsis-dap",
-      "mbed",
-      "stlink"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  }
-}

debian/changelog

@@ -1,34 +1,3 @@
-meshtasticd (2.7.17.0) unstable; urgency=medium
-
-  * Version 2.7.17
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Fri, 28 Nov 2025 15:11:34 +0000
-
-meshtasticd (2.7.16.0) unstable; urgency=medium
-
-  * Version 2.7.16
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 19 Nov 2025 16:12:32 +0000
-
-
-meshtasticd (2.7.15.0) unstable; urgency=medium
-
-  * Version 2.7.15
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 13 Nov 2025 12:31:57 +0000
-
-meshtasticd (2.7.14.0) unstable; urgency=medium
-
-  * Version 2.7.14
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 03 Nov 2025 16:11:31 +0000
-
-meshtasticd (2.7.13.0) unstable; urgency=medium
-
-  * Version 2.7.13
-
- -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Sat, 11 Oct 2025 15:27:28 +0000
-
 meshtasticd (2.7.12.0) unstable; urgency=medium
 
   [ Austin Lane ]

debian/control

@@ -3,7 +3,6 @@ Section: misc
 Priority: optional
 Maintainer: Austin Lane <vidplace7@gmail.com>
 Build-Depends: debhelper-compat (= 13),
-               libc6-dev (>= 2.38) | libbsd-dev,
                lsb-release,
                tar,
                gzip,

debian/rules

@@ -28,4 +28,5 @@ override_dh_auto_build:
 	# Build with platformio
 	$(PIO_ENV) platformio run -e native-tft
 	# Move the binary and default config to the correct name
+	mv .pio/build/native-tft/program .pio/build/native-tft/meshtasticd
 	cp bin/config-dist.yaml bin/config.yaml

extra_scripts/disable_adafruit_usb.py

@@ -1,9 +1,10 @@
-#!/usr/bin/env python3
 # trunk-ignore-all(flake8/F821)
 # trunk-ignore-all(ruff/F821)
 
 Import("env")
 
+# NOTE: This is not currently used, but can serve as an example on how to write extra_scripts
+
 # print("Current CLI targets", COMMAND_LINE_TARGETS)
 # print("Current Build targets", BUILD_TARGETS)
 # print("CPP defs", env.get("CPPDEFINES"))

extra_scripts/esp32_extra.py

@@ -1,80 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-# trunk-ignore-all(ruff/E402): Hacky esptool import
-# trunk-ignore-all(flake8/E402): Hacky esptool import
-import sys
-from os.path import join
-
-Import("env")
-platform = env.PioPlatform()
-
-sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
-import esptool
-
-
-def esp32_create_combined_bin(source, target, env):
-    # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
-    # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
-    print("Generating combined binary for serial flashing")
-
-    app_offset = 0x10000
-
-    new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
-    sections = env.subst(env.get("FLASH_EXTRA_IMAGES"))
-    firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
-    chip = env.get("BOARD_MCU")
-    board = env.BoardConfig()
-    flash_size = board.get("upload.flash_size")
-    flash_freq = board.get("build.f_flash", "40m")
-    flash_freq = flash_freq.replace("000000L", "m")
-    flash_mode = board.get("build.flash_mode", "dio")
-    memory_type = board.get("build.arduino.memory_type", "qio_qspi")
-    if flash_mode == "qio" or flash_mode == "qout":
-        flash_mode = "dio"
-    if memory_type == "opi_opi" or memory_type == "opi_qspi":
-        flash_mode = "dout"
-    cmd = [
-        "--chip",
-        chip,
-        "merge_bin",
-        "-o",
-        new_file_name,
-        "--flash_mode",
-        flash_mode,
-        "--flash_freq",
-        flash_freq,
-        "--flash_size",
-        flash_size,
-    ]
-
-    print("    Offset | File")
-    for section in sections:
-        sect_adr, sect_file = section.split(" ", 1)
-        print(f" -  {sect_adr} | {sect_file}")
-        cmd += [sect_adr, sect_file]
-
-    print(f" - {hex(app_offset)} | {firmware_name}")
-    cmd += [hex(app_offset), firmware_name]
-
-    print("Using esptool.py arguments: %s" % " ".join(cmd))
-
-    esptool.main(cmd)
-
-
-env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
-
-esp32_kind = env.GetProjectOption("custom_esp32_kind")
-if esp32_kind == "esp32":
-    # Free up some IRAM by removing auxiliary SPI flash chip drivers.
-    # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
-    env.Append(
-        LINKFLAGS=[
-            "-Wl,--wrap=esp_flash_chip_gd",
-            "-Wl,--wrap=esp_flash_chip_issi",
-            "-Wl,--wrap=esp_flash_chip_winbond",
-        ]
-    )
-else:
-    # For newer ESP32 targets, using newlib nano works better.
-    env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])

extra_scripts/esp32_pre.py

@@ -1,73 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-import json
-import sys
-from os.path import isfile
-
-Import("env")
-
-
-# From https://github.com/platformio/platform-espressif32/blob/develop/builder/main.py
-def _parse_size(value):
-    if isinstance(value, int):
-        return value
-    elif value.isdigit():
-        return int(value)
-    elif value.startswith("0x"):
-        return int(value, 16)
-    elif value[-1].upper() in ("K", "M"):
-        base = 1024 if value[-1].upper() == "K" else 1024 * 1024
-        return int(value[:-1]) * base
-    return value
-
-
-def _parse_partitions(env):
-    partitions_csv = env.subst("$PARTITIONS_TABLE_CSV")
-    if not isfile(partitions_csv):
-        sys.stderr.write(
-            "Could not find the file %s with partitions " "table.\n" % partitions_csv
-        )
-        env.Exit(1)
-        return
-
-    result = []
-    # The first offset is 0x9000 because partition table is flashed to 0x8000 and
-    # occupies an entire flash sector, which size is 0x1000
-    next_offset = 0x9000
-    with open(partitions_csv) as fp:
-        for line in fp.readlines():
-            line = line.strip()
-            if not line or line.startswith("#"):
-                continue
-            tokens = [t.strip() for t in line.split(",")]
-            if len(tokens) < 5:
-                continue
-
-            bound = 0x10000 if tokens[1] in ("0", "app") else 4
-            calculated_offset = (next_offset + bound - 1) & ~(bound - 1)
-            partition = {
-                "name": tokens[0],
-                "type": tokens[1],
-                "subtype": tokens[2],
-                "offset": tokens[3] or calculated_offset,
-                "size": tokens[4],
-                "flags": tokens[5] if len(tokens) > 5 else None,
-            }
-            result.append(partition)
-            next_offset = _parse_size(partition["offset"]) + _parse_size(
-                partition["size"]
-            )
-
-    return result
-
-
-def mtjson_esp32_part(target, source, env):
-    part = _parse_partitions(env)
-    pj = json.dumps(part)
-    # print(f"JSON_PARTITIONS: {pj}")
-    # Dump json string to 'custom_mtjson_part' variable to use later when writing the manifest
-    env.Replace(custom_mtjson_part=pj)
-
-
-env.AddPreAction("mtjson", mtjson_esp32_part)

extra_scripts/extra_stm32.py

@@ -1,9 +1,7 @@
-#!/usr/bin/env python3
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 
 Import("env")
-
 # Custom HEX from ELF
 env.AddPostAction(
     "$BUILD_DIR/${PROGNAME}.elf",

extra_scripts/nrf52_extra.py

@@ -1,50 +0,0 @@
-#!/usr/bin/env python3
-# trunk-ignore-all(ruff/F821)
-# trunk-ignore-all(flake8/F821): For SConstruct imports
-
-import sys
-from os.path import basename
-
-Import("env")
-
-
-# Custom HEX from ELF
-# Convert hex to uf2 for nrf52
-def nrf52_hex_to_uf2(source, target, env):
-    hex_path = target[0].get_abspath()
-    # When using merged hex, drop 'merged' from uf2 filename
-    uf2_path = hex_path.replace(".merged.", ".")
-    uf2_path = uf2_path.replace(".hex", ".uf2")
-    env.Execute(
-        env.VerboseAction(
-            f'"{sys.executable}" ./bin/uf2conv.py "{hex_path}" -c -f 0xADA52840 -o "{uf2_path}"',
-            f"Generating UF2 file from {basename(hex_path)}",
-        )
-    )
-
-
-def nrf52_mergehex(source, target, env):
-    hex_path = target[0].get_abspath()
-    merged_hex_path = hex_path.replace(".hex", ".merged.hex")
-    merge_with = None
-    if "wio-sdk-wm1110" == str(env.get("PIOENV")):
-        merge_with = env.subst("$PROJECT_DIR/bin/s140_nrf52_7.3.0_softdevice.hex")
-    else:
-        print("merge_with not defined for this target")
-
-    if merge_with is not None:
-        env.Execute(
-            env.VerboseAction(
-                f'"$PROJECT_DIR/bin/mergehex" -m "{hex_path}" "{merge_with}" -o "{merged_hex_path}"',
-                "Merging HEX with SoftDevice",
-            )
-        )
-        print(f'Merged file saved at "{basename(merged_hex_path)}"')
-        nrf52_hex_to_uf2([hex_path, merge_with], [env.File(merged_hex_path)], env)
-
-
-# if WM1110 target, merge hex with softdevice 7.3.0
-if "wio-sdk-wm1110" == env.get("PIOENV"):
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex", nrf52_mergehex)
-else:
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex", nrf52_hex_to_uf2)

meshtasticd.spec.rpkg

@@ -49,13 +49,6 @@ BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
 
-# libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
-%if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
-BuildRequires: glibc-devel >= 2.38
-%else
-BuildRequires: pkgconfig(libbsd-overlay)
-%endif
-
 Requires:      systemd-udev
 
 %description
@@ -76,7 +69,7 @@ platformio run -e native-tft
 %install
 # Install meshtasticd binary
 mkdir -p %{buildroot}%{_bindir}
-install -m 0755 .pio/build/native-tft/meshtasticd %{buildroot}%{_bindir}/meshtasticd
+install -m 0755 .pio/build/native-tft/program %{buildroot}%{_bindir}/meshtasticd
 
 # Install portduino VFS dir
 install -p -d -m 0770 %{buildroot}%{_localstatedir}/lib/meshtasticd

platformio.ini

@@ -5,7 +5,7 @@
 default_envs = tbeam
 
 extra_configs =
-	variants/*/*.ini
+	arch/*/*.ini
 	variants/*/*/platformio.ini
 	variants/*/diy/*/platformio.ini
 	src/graphics/niche/InkHUD/PlatformioConfig.ini
@@ -14,9 +14,7 @@ description = Meshtastic
 
 [env]
 test_build_src = true
-extra_scripts =
-	pre:bin/platformio-pre.py
-	bin/platformio-custom.py
+extra_scripts = bin/platformio-custom.py
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
 ; of code is a heap corruption bug!
@@ -64,7 +62,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -72,7 +70,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-TinyGPSPlus packageName=https://github.com/meshtastic/TinyGPSPlus gitBranch=master
 	https://github.com/meshtastic/TinyGPSPlus/archive/71a82db35f3b973440044c476d4bcdc673b104f4.zip
 	# renovate: datasource=git-refs depName=meshtastic-ArduinoThread packageName=https://github.com/meshtastic/ArduinoThread gitBranch=master
-	https://github.com/meshtastic/ArduinoThread/archive/b841b0415721f1341ea41cccfb4adccfaf951567.zip
+	https://github.com/meshtastic/ArduinoThread/archive/7c3ee9e1951551b949763b1f5280f8db1fa4068d.zip
 	# renovate: datasource=custom.pio depName=Nanopb packageName=nanopb/library/Nanopb
 	nanopb/Nanopb@0.4.91
 	# renovate: datasource=custom.pio depName=ErriezCRC32 packageName=erriez/library/ErriezCRC32
@@ -92,7 +90,7 @@ framework = arduino
 lib_deps =
 	${env.lib_deps}
 	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.4.0
+	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
@@ -117,13 +115,12 @@ lib_deps =
 [radiolib_base]
 lib_deps =
 	# renovate: datasource=custom.pio depName=RadioLib packageName=jgromes/library/RadioLib
-	# jgromes/RadioLib@7.4.0
-	https://github.com/jgromes/RadioLib/archive/536c7267362e2c1345be7054ba45e503252975ff.zip
+	jgromes/RadioLib@7.3.0
 
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/4fb5f24787caa841b58dbf623a52c4c5861d6722.zip
+	https://github.com/meshtastic/device-ui/archive/505ffadaa7a931df5dc8153229b719a07bbb028c.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -167,11 +164,11 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
-	dfrobot/DFRobot_RTU@1.0.6
+	dfrobot/DFRobot_RTU@1.0.3
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.5
+	robtillaart/INA226@0.6.4
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -179,13 +176,11 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
 	adafruit/Adafruit LTR390 Library@1.1.2
 	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.6
+	adafruit/Adafruit PCT2075@1.0.5
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561
 	adafruit/Adafruit TSL2561@1.1.2
-	# renovate: datasource=custom.pio depName=BH1750_WE packageName=wollewald/library/BH1750_WE
-	wollewald/BH1750_WE@1.1.10
 
 ; (not included in native / portduino)
 [environmental_extra]
@@ -207,7 +202,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
 	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
 	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
-	closedcube/ClosedCube OPT3001@1.1.2
+	ClosedCube OPT3001@1.1.2
 	# renovate: datasource=custom.pio depName=Bosch BSEC2 packageName=boschsensortec/library/bsec2
 	boschsensortec/bsec2@1.10.2610
 	# renovate: datasource=custom.pio depName=Bosch BME68x packageName=boschsensortec/library/BME68x Sensor Library
@@ -215,6 +210,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.2
+	sensirion/Sensirion Core@0.7.1
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0

src/AudioThread.h

@@ -50,11 +50,8 @@ class AudioThread : public concurrency::OSThread
             delete i2sRtttl;
             i2sRtttl = nullptr;
         }
-
-        if (rtttlFile != nullptr) {
-            delete rtttlFile;
-            rtttlFile = nullptr;
-        }
+        delete rtttlFile;
+        rtttlFile = nullptr;
 
         setCPUFast(false);
 #ifdef T_LORA_PAGER
@@ -102,9 +99,9 @@ class AudioThread : public concurrency::OSThread
     };
 
     AudioGeneratorRTTTL *i2sRtttl = nullptr;
-    AudioOutputI2S *audioOut = nullptr;
+    AudioOutputI2S *audioOut;
 
-    AudioFileSourcePROGMEM *rtttlFile = nullptr;
+    AudioFileSourcePROGMEM *rtttlFile;
 };
 
 #endif

src/NodeStatus.h

@@ -14,16 +14,16 @@ class NodeStatus : public Status
     CallbackObserver<NodeStatus, const NodeStatus *> statusObserver =
         CallbackObserver<NodeStatus, const NodeStatus *>(this, &NodeStatus::updateStatus);
 
-    uint16_t numOnline = 0;
-    uint16_t numTotal = 0;
+    uint8_t numOnline = 0;
+    uint8_t numTotal = 0;
 
-    uint16_t lastNumTotal = 0;
+    uint8_t lastNumTotal = 0;
 
   public:
     bool forceUpdate = false;
 
     NodeStatus() { statusType = STATUS_TYPE_NODE; }
-    NodeStatus(uint16_t numOnline, uint16_t numTotal, bool forceUpdate = false) : Status()
+    NodeStatus(uint8_t numOnline, uint8_t numTotal, bool forceUpdate = false) : Status()
     {
         this->forceUpdate = forceUpdate;
         this->numOnline = numOnline;
@@ -34,11 +34,11 @@ class NodeStatus : public Status
 
     void observe(Observable<const NodeStatus *> *source) { statusObserver.observe(source); }
 
-    uint16_t getNumOnline() const { return numOnline; }
+    uint8_t getNumOnline() const { return numOnline; }
 
-    uint16_t getNumTotal() const { return numTotal; }
+    uint8_t getNumTotal() const { return numTotal; }
 
-    uint16_t getLastNumTotal() const { return lastNumTotal; }
+    uint8_t getLastNumTotal() const { return lastNumTotal; }
 
     bool matches(const NodeStatus *newStatus) const
     {
@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %u online, %u total", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -194,7 +194,7 @@ static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level se
 
 #ifdef BATTERY_PIN
 
-void battery_adcEnable()
+static void adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -214,7 +214,7 @@ void battery_adcEnable()
 #endif
 }
 
-static void battery_adcDisable()
+static void adcDisable()
 {
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -278,11 +278,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 break;
             }
         }
-#if defined(BATTERY_CHARGING_INV)
-        // bit of trickery to show 99% up until the charge finishes
-        if (!digitalRead(BATTERY_CHARGING_INV) && battery_SOC > 99)
-            battery_SOC = 99;
-#endif
         return clamp((int)(battery_SOC), 0, 100);
     }
 
@@ -325,7 +320,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             uint32_t raw = 0;
             float scaled = 0;
 
-            battery_adcEnable();
+            adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
@@ -337,7 +332,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
-            battery_adcDisable();
+            adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -460,8 +455,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
-#elif defined(MUZI_BASE)
-        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -477,8 +470,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
-#elif defined(BATTERY_CHARGING_INV)
-        return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
@@ -571,7 +562,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
                    config.power.device_battery_ina_address) {
             if (!ina226Sensor.isInitialized())
                 return ina226Sensor.runOnce() > 0;
-            return ina226Sensor.isRunning();
         } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
                    config.power.device_battery_ina_address) {
             if (!ina260Sensor.isInitialized())
@@ -701,24 +691,7 @@ bool Power::setup()
 #ifdef NRF_APM
     found = true;
 #endif
-#ifdef EXT_PWR_DETECT
-    attachInterrupt(
-        EXT_PWR_DETECT,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-        },
-        CHANGE);
-#endif
-#ifdef BATTERY_CHARGING_INV
-    attachInterrupt(
-        BATTERY_CHARGING_INV,
-        []() {
-            power->setIntervalFromNow(0);
-            runASAP = true;
-        },
-        CHANGE);
-#endif
+
     enabled = found;
     low_voltage_counter = 0;
 
@@ -775,8 +748,6 @@ void Power::shutdown()
     if (screen) {
 #ifdef T_DECK_PRO
         screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#elif defined(USE_EINK)
-        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -924,8 +895,13 @@ void Power::readPowerStatus()
             low_voltage_counter++;
             LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
             if (low_voltage_counter > 10) {
+#ifdef ARCH_NRF52
+                // We can't trigger deep sleep on NRF52, it's freezing the board
+                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
+#else
                 LOG_INFO("Low voltage detected, trigger deep sleep");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
+#endif
             }
         } else {
             low_voltage_counter = 0;
@@ -1453,7 +1429,7 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return PPM->isVbusIn(); }
+    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
@@ -1565,4 +1541,4 @@ bool Power::meshSolarInit()
 {
     return false;
 }
-#endif
+#endif

src/PowerFSM.cpp

@@ -57,21 +57,21 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_POWERFSM("State: SDS");
+    LOG_DEBUG("State: SDS");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false);
 }
 
 static void lowBattSDSEnter()
 {
-    LOG_POWERFSM("State: Lower batt SDS");
+    LOG_DEBUG("State: Lower batt SDS");
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true);
 }
 extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_POWERFSM("State: SHUTDOWN");
+    LOG_DEBUG("State: SHUTDOWN");
     shutdownAtMsec = millis();
 }
 
@@ -81,7 +81,7 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    LOG_POWERFSM("lsEnter begin, ls_secs=%u", config.power.ls_secs);
+    LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
     if (screen)
         screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
@@ -155,12 +155,12 @@ static void lsIdle()
 
 static void lsExit()
 {
-    LOG_POWERFSM("State: lsExit");
+    LOG_INFO("Exit state: LS");
 }
 
 static void nbEnter()
 {
-    LOG_POWERFSM("State: nbEnter");
+    LOG_DEBUG("State: NB");
     if (screen)
         screen->setOn(false);
 #ifdef ARCH_ESP32
@@ -173,7 +173,6 @@ static void nbEnter()
 
 static void darkEnter()
 {
-    LOG_POWERFSM("State: darkEnter");
     setBluetoothEnable(true);
     if (screen)
         screen->setOn(false);
@@ -181,7 +180,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_POWERFSM("State: serialEnter");
+    LOG_DEBUG("State: SERIAL");
     setBluetoothEnable(false);
     if (screen) {
         screen->setOn(true);
@@ -190,14 +189,13 @@ static void serialEnter()
 
 static void serialExit()
 {
-    LOG_POWERFSM("State: serialExit");
     // Turn bluetooth back on when we leave serial stream API
     setBluetoothEnable(true);
 }
 
 static void powerEnter()
 {
-    LOG_POWERFSM("State: powerEnter");
+    // LOG_DEBUG("State: POWER");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         LOG_INFO("Loss of power in Powered");
@@ -212,7 +210,6 @@ static void powerEnter()
 
 static void powerIdle()
 {
-    // LOG_POWERFSM("State: powerIdle"); // very chatty
     if (!isPowered()) {
         // If we got here, we are in the wrong state
         LOG_INFO("Loss of power in Powered");
@@ -222,13 +219,14 @@ static void powerIdle()
 
 static void powerExit()
 {
-    LOG_POWERFSM("State: powerExit");
+    if (screen)
+        screen->setOn(true);
     setBluetoothEnable(true);
 }
 
 static void onEnter()
 {
-    LOG_POWERFSM("State: onEnter");
+    LOG_DEBUG("State: ON");
     if (screen)
         screen->setOn(true);
     setBluetoothEnable(true);
@@ -236,7 +234,6 @@ static void onEnter()
 
 static void onIdle()
 {
-    LOG_POWERFSM("State: onIdle");
     if (isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state handle things
         powerFSM.trigger(EVENT_POWER_CONNECTED);
@@ -245,7 +242,7 @@ static void onIdle()
 
 static void bootEnter()
 {
-    LOG_POWERFSM("State: bootEnter");
+    LOG_DEBUG("State: BOOT");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -322,6 +319,11 @@ void PowerFSM_setup()
         // if any packet destined for phone arrives, turn on bluetooth at least
         powerFSM.add_transition(&stateNB, &stateDARK, EVENT_PACKET_FOR_PHONE, NULL, "Packet for phone");
 
+        // Removed 2.7: we don't show the nodes individually for every node on the screen anymore
+        // powerFSM.add_transition(&stateNB, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateDARK, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+        // powerFSM.add_transition(&stateON, &stateON, EVENT_NODEDB_UPDATED, NULL, "NodeDB update");
+
         // Show the received text message
         powerFSM.add_transition(&stateLS, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
         powerFSM.add_transition(&stateNB, &stateON, EVENT_RECEIVED_MSG, NULL, "Received text");
@@ -370,7 +372,7 @@ void PowerFSM_setup()
     // Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated
     // through the modules
 
-#if HAS_WIFI && !defined(MESHTASTIC_EXCLUDE_WIFI)
+#if HAS_WIFI || !defined(MESHTASTIC_EXCLUDE_WIFI)
     bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;

src/PowerFSM.h

@@ -2,12 +2,6 @@
 
 #include "configuration.h"
 
-#ifdef PowerFSMDebug
-#define LOG_POWERFSM(...) LOG_DEBUG(__VA_ARGS__)
-#else
-#define LOG_POWERFSM(...)
-#endif
-
 // See sw-design.md for documentation
 
 #define EVENT_PRESS 1

src/SerialConsole.cpp

@@ -50,7 +50,6 @@ void consolePrintf(const char *format, ...)
 
 SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), concurrency::OSThread("SerialConsole")
 {
-    api_type = TYPE_SERIAL;
     assert(!console);
     console = this;
     canWrite = false; // We don't send packets to our port until it has talked to us first

src/buzz/buzz.cpp

@@ -16,7 +16,6 @@ struct ToneDuration {
 };
 
 // Some common frequencies.
-#define NOTE_SILENT 1
 #define NOTE_C3 131
 #define NOTE_CS3 139
 #define NOTE_D3 147
@@ -30,16 +29,11 @@ struct ToneDuration {
 #define NOTE_AS3 233
 #define NOTE_B3 247
 #define NOTE_CS4 277
-#define NOTE_B4 494
-#define NOTE_F5 698
-#define NOTE_G6 1568
-#define NOTE_E7 2637
 
-const int DURATION_1_16 = 62;  // 1/16 note
 const int DURATION_1_8 = 125;  // 1/8 note
 const int DURATION_1_4 = 250;  // 1/4 note
 const int DURATION_1_2 = 500;  // 1/2 note
-const int DURATION_3_4 = 750;  // 3/4 note
+const int DURATION_3_4 = 750;  // 1/4 note
 const int DURATION_1_1 = 1000; // 1/1 note
 
 void playTones(const ToneDuration *tone_durations, int size)
@@ -77,24 +71,13 @@ void playLongBeep()
 
 void playGPSEnableBeep()
 {
-#if defined(R1_NEO) || defined(MUZI_BASE)
-    ToneDuration melody[] = {
-        {NOTE_F5, DURATION_1_2}, {NOTE_G6, DURATION_1_8}, {NOTE_E7, DURATION_1_4}, {NOTE_SILENT, DURATION_1_2}};
-#else
     ToneDuration melody[] = {{NOTE_C3, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_CS4, DURATION_1_4}};
-#endif
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
 void playGPSDisableBeep()
 {
-#if defined(R1_NEO) || defined(MUZI_BASE)
-    ToneDuration melody[] = {{NOTE_B4, DURATION_1_16}, {NOTE_B4, DURATION_1_16},   {NOTE_SILENT, DURATION_1_8},
-                             {NOTE_F3, DURATION_1_16}, {NOTE_F3, DURATION_1_16},   {NOTE_SILENT, DURATION_1_8},
-                             {NOTE_C3, DURATION_1_1},  {NOTE_SILENT, DURATION_1_1}};
-#else
     ToneDuration melody[] = {{NOTE_CS4, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_C3, DURATION_1_4}};
-#endif
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 

src/configuration.h

@@ -33,32 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "pcf8563.h"
 #endif
 
-/* Offer chance for variant-specific defines */
-#include "variant.h"
-
-// -----------------------------------------------------------------------------
-// Display feature overrides
-// -----------------------------------------------------------------------------
-
-// Allow build environments to opt-in explicitly to the E-Ink UI stack while
-// keeping headless targets slim by default. Existing variants that already
-// define USE_EINK continue to work without additional flags.
-#ifndef MESHTASTIC_USE_EINK_UI
-#ifdef USE_EINK
-#define MESHTASTIC_USE_EINK_UI 1
-#else
-#define MESHTASTIC_USE_EINK_UI 0
-#endif
-#endif
-
-#if MESHTASTIC_USE_EINK_UI
-#ifndef USE_EINK
-#define USE_EINK
-#endif
-#else
-#undef USE_EINK
-#endif
-
 // -----------------------------------------------------------------------------
 // Version
 // -----------------------------------------------------------------------------
@@ -149,11 +123,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
 #endif
 
-#ifdef RAK13302
-#define NUM_PA_POINTS 22
-#define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
-#endif
-
 // Default system gain to 0 if not defined
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
@@ -251,7 +220,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ICM20948_ADDR_ALT 0x68
 #define BHI260AP_ADDR 0x28
 #define BMM150_ADDR 0x13
-#define DA217_ADDR 0x26
 
 // -----------------------------------------------------------------------------
 // LED
@@ -273,9 +241,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A // same address as CST226SE
-#define CHSC6X_ADDR 0x2E
-#define CST226SE_ADDR_ALT 0x5A
+#define CST328_ADDR 0x1A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -294,6 +260,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // convert 24-bit color to 16-bit (56K)
 #define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
 
+/* Step #1: offer chance for variant-specific defines */
+#include "variant.h"
+
 #if defined(VEXT_ENABLE) && !defined(VEXT_ON_VALUE)
 // Older variant.h files might not be defining this value, so stay with the old default
 #define VEXT_ON_VALUE LOW
@@ -394,9 +363,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_BLUETOOTH
 #define HAS_BLUETOOTH 0
 #endif
-#ifndef USE_TFTDISPLAY
-#define USE_TFTDISPLAY 0
-#endif
 
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
@@ -423,13 +389,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define HAS_RGB_LED
 #endif
 
-#ifndef LED_STATE_OFF
-#define LED_STATE_OFF 0
-#endif
-#ifndef LED_STATE_ON
-#define LED_STATE_ON 1
-#endif
-
 // default mapping of pins
 #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
 #define ALT_BUTTON_PIN PIN_BUTTON2

src/detect/ScanI2C.h

@@ -82,11 +82,7 @@ class ScanI2C
         BHI260AP,
         BMM150,
         TSL2561,
-        DRV2605,
-        BH1750,
-        DA217,
-        CHSC6X,
-        CST226SE
+        DRV2605
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CConsumer.cpp

@@ -1,16 +0,0 @@
-#include "ScanI2CConsumer.h"
-#include <forward_list>
-
-static std::forward_list<ScanI2CConsumer *> ScanI2CConsumers;
-
-ScanI2CConsumer::ScanI2CConsumer()
-{
-    ScanI2CConsumers.push_front(this);
-}
-
-void ScanI2CCompleted(ScanI2C *i2cScanner)
-{
-    for (ScanI2CConsumer *consumer : ScanI2CConsumers) {
-        consumer->i2cScanFinished(i2cScanner);
-    }
-}

src/detect/ScanI2CConsumer.h

@@ -1,13 +0,0 @@
-#pragma once
-
-#include "ScanI2C.h"
-#include <stddef.h>
-
-class ScanI2CConsumer
-{
-  public:
-    ScanI2CConsumer();
-    virtual void i2cScanFinished(ScanI2C *i2cScanner) = 0;
-};
-
-void ScanI2CCompleted(ScanI2C *i2cScanner);

src/detect/ScanI2CTwoWire.cpp

@@ -106,7 +106,6 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
         if (i2cBus->available())
             i2cBus->read();
     }
-    LOG_DEBUG("Register value: 0x%x", value);
     return value;
 }
 
@@ -378,13 +377,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2);
-                if (registerValue == 0x5449) {
-                    type = OPT3001;
-                    logFoundDevice("OPT3001", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2) != 0) { // unique SHT4x serial number
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
+                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c || registerValue == 0xc8d) {
                     type = SHT4X;
                     logFoundDevice("SHT4X", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
+                    type = OPT3001;
+                    logFoundDevice("OPT3001", (uint8_t)addr.address);
                 } else {
                     type = SHT31;
                     logFoundDevice("SHT31", (uint8_t)addr.address);
@@ -465,23 +464,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
-            case TCA9555_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x01), 1);
-                if (registerValue == 0x13) {
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
-                    if (registerValue == 0x81) {
-                        type = DA217;
-                        logFoundDevice("DA217", (uint8_t)addr.address);
-                    } else {
-                        type = TCA9555;
-                        logFoundDevice("TCA9555", (uint8_t)addr.address);
-                    }
-                } else {
-                    type = TCA9555;
-                    logFoundDevice("TCA9555", (uint8_t)addr.address);
-                }
-                break;
             case TSL25911_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x12), 1);
                 if (registerValue == 0x50) {
@@ -499,38 +483,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-            case CST328_ADDR:
-                // Do we have the CST328 or the CST226SE
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
-                if (registerValue == 0xA9) {
-                    type = CST226SE;
-                    logFoundDevice("CST226SE", (uint8_t)addr.address);
-                } else {
-                    type = CST328;
-                    logFoundDevice("CST328", (uint8_t)addr.address);
-                }
-                break;
-
-                SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
-            case LTR553ALS_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
-                if (registerValue == 0x92) {                                                       // LTR553ALS Part ID
-                    type = LTR553ALS;
-                    logFoundDevice("LTR553ALS", (uint8_t)addr.address);
-                } else {
-                    // Test BH1750 - send power on command
-                    i2cBus->beginTransmission(addr.address);
-                    i2cBus->write(0x01); // Power On command
-                    uint8_t bh1750_error = i2cBus->endTransmission();
-                    if (bh1750_error == 0) {
-                        type = BH1750;
-                        logFoundDevice("BH1750", (uint8_t)addr.address);
-                    } else {
-                        LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address);
-                    }
-                }
-                break;
-
+                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);
@@ -539,12 +493,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
             case MLX90614_ADDR_DEF:
-                // Do we have the MLX90614 or the MPR121KB or the CST226SE
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x06), 1);
-                if (registerValue == 0xAB) {
-                    type = CST226SE;
-                    logFoundDevice("CST226SE", (uint8_t)addr.address);
-                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1) == 0x5a) {
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1);
+                if (registerValue == 0x5a) {
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
@@ -562,11 +512,6 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case ICM20948_ADDR:     // same as BMX160_ADDR
             case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
-#ifdef HAS_ICM20948
-                type = ICM20948;
-                logFoundDevice("ICM20948", (uint8_t)addr.address);
-                break;
-#endif
                 if (registerValue == 0xEA) {
                     type = ICM20948;
                     logFoundDevice("ICM20948", (uint8_t)addr.address);
@@ -635,7 +580,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
     scanPort(port, nullptr, 0);
 }
 
-TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address)
+TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
 {
     if (address.port == ScanI2C::I2CPort::WIRE) {
         return &Wire;

src/detect/ScanI2CTwoWire.h

@@ -23,12 +23,12 @@ class ScanI2CTwoWire : public ScanI2C
 
     ScanI2C::FoundDevice find(ScanI2C::DeviceType) const override;
 
+    TwoWire *fetchI2CBus(ScanI2C::DeviceAddress) const;
+
     bool exists(ScanI2C::DeviceType) const override;
 
     size_t countDevices() const override;
 
-    static TwoWire *fetchI2CBus(ScanI2C::DeviceAddress);
-
   protected:
     FoundDevice firstOfOrNONE(size_t, DeviceType[]) const override;
 

src/gps/GPS.cpp

@@ -38,16 +38,14 @@ template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
     return N;
 }
 
-#ifndef GPS_SERIAL_PORT
-#define GPS_SERIAL_PORT Serial1
-#endif
-
-#if defined(ARCH_NRF52)
-Uart *GPS::_serial_gps = &GPS_SERIAL_PORT;
-#elif defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
+#if defined(GPS_SERIAL_PORT)
 HardwareSerial *GPS::_serial_gps = &GPS_SERIAL_PORT;
+#else
+HardwareSerial *GPS::_serial_gps = &Serial1;
+#endif
 #elif defined(ARCH_RP2040)
-SerialUART *GPS::_serial_gps = &GPS_SERIAL_PORT;
+SerialUART *GPS::_serial_gps = &Serial1;
 #else
 HardwareSerial *GPS::_serial_gps = nullptr;
 #endif
@@ -242,9 +240,6 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
             buffer[bytesRead] = b;
             bytesRead++;
             if ((bytesRead == 767) || (b == '\r')) {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(debugmsg.c_str());
-#endif
                 if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
 #ifdef GPS_DEBUG
                     LOG_DEBUG("Found: %s", message); // Log the found message
@@ -252,6 +247,9 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
                     return GNSS_RESPONSE_OK;
                 } else {
                     bytesRead = 0;
+#ifdef GPS_DEBUG
+                    LOG_DEBUG(debugmsg.c_str());
+#endif
                 }
             }
         }
@@ -496,10 +494,22 @@ bool GPS::setup()
     if (!didSerialInit) {
         int msglen = 0;
         if (tx_gpio && gnssModel == GNSS_MODEL_UNKNOWN) {
+#ifdef TRACKER_T1000_E
+            // add power up/down strategy, improve ag3335 detection success
+            digitalWrite(PIN_GPS_EN, LOW);
+            delay(500);
+            digitalWrite(GPS_VRTC_EN, LOW);
+            delay(1000);
+            digitalWrite(GPS_VRTC_EN, HIGH);
+            delay(500);
+            digitalWrite(PIN_GPS_EN, HIGH);
+            delay(1000);
+#endif
             if (probeTries < GPS_PROBETRIES) {
+                LOG_DEBUG("Probe for GPS at %d", serialSpeeds[speedSelect]);
                 gnssModel = probe(serialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (currentStep == 0 && ++speedSelect == array_count(serialSpeeds)) {
+                    if (++speedSelect == array_count(serialSpeeds)) {
                         speedSelect = 0;
                         ++probeTries;
                     }
@@ -508,9 +518,10 @@ bool GPS::setup()
             // Rare Serial Speeds
 #ifndef CONFIG_IDF_TARGET_ESP32C6
             if (probeTries == GPS_PROBETRIES) {
+                LOG_DEBUG("Probe for GPS at %d", rareSerialSpeeds[speedSelect]);
                 gnssModel = probe(rareSerialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (currentStep == 0 && ++speedSelect == array_count(rareSerialSpeeds)) {
+                    if (++speedSelect == array_count(rareSerialSpeeds)) {
                         LOG_WARN("Give up on GPS probe and set to %d", GPS_BAUDRATE);
                         return true;
                     }
@@ -1022,7 +1033,7 @@ void GPS::down()
     LOG_DEBUG("%us until next search", sleepTime / 1000);
 
     // If update interval less than 10 seconds, no attempt to sleep
-    if (updateInterval <= GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS || sleepTime == 0)
+    if (updateInterval <= 10 * 1000UL || sleepTime == 0)
         setPowerState(GPS_IDLE);
 
     else {
@@ -1083,7 +1094,7 @@ int32_t GPS::runOnce()
             return disable();
         }
         if (!setup())
-            return currentDelay; // Setup failed, re-run in two seconds
+            return 2000; // Setup failed, re-run in two seconds
 
         // We have now loaded our saved preferences from flash
         if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
@@ -1093,29 +1104,6 @@ int32_t GPS::runOnce()
         publishUpdate();
     }
 
-    // ======================== GPS_ACTIVE state ========================
-    // In GPS_ACTIVE state, GPS is powered on and we're receiving NMEA messages.
-    // We use the following logic to determine when to update the local position
-    // or time by running GPS::publishUpdate.
-    // Note: Local position update is asynchronous to position broadcast. We
-    // generally run this state every gps_update_interval seconds, and in most cases
-    // gps_update_interval is faster than the position broadcast interval so there's a
-    // fresh position ready when the device wants to broadcast one on the mesh.
-    //
-    // 1. Got a time for the first time --> set the time, don't publish.
-    // 2. Got a lock for the first time
-    //   --> If gps_update_interval is <= 10s --> publishUpdate
-    //   --> Otherwise, hold for MIN(gps_update_interval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS, 20s)
-    //  3. Got a lock after turning back on
-    //   --> If gps_update_interval is <= 10s --> publishUpdate
-    //   --> Otherwise, hold for MIN(gps_update_interval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS, 20s)
-    // 4. Hold has expired
-    //   --> If we have a time and a location --> publishUpdate
-    //   --> down()
-    // 5. Search time has expired
-    //   --> If we have a time and a location --> publishUpdate
-    //   --> If we had a location before but don't now --> publishUpdate
-    //   --> down()
     if (whileActive()) {
         // if we have received valid NMEA claim we are connected
         setConnected();
@@ -1125,81 +1113,55 @@ int32_t GPS::runOnce()
     if (!config.position.fixed_position && powerState != GPS_ACTIVE && scheduling.isUpdateDue())
         up();
 
-    // quality of the previous fix. We set it to 0 when we go down, so it's a way
-    // to check if we're getting a lock after being GPS_OFF.
+    // If we've already set time from the GPS, no need to ask the GPS
+    bool gotTime = (getRTCQuality() >= RTCQualityGPS);
+    if (!gotTime && lookForTime()) { // Note: we count on this && short-circuiting and not resetting the RTC time
+        gotTime = true;
+        shouldPublish = true;
+    }
+
     uint8_t prev_fixQual = fixQual;
+    bool gotLoc = lookForLocation();
+    if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
+        LOG_DEBUG("hasValidLocation RISING EDGE");
+        hasValidLocation = true;
+        shouldPublish = true;
+        // Hold for 20secs after getting a lock to download ephemeris etc
+        fixHoldEnds = millis() + 20000;
+    }
 
-    if (powerState == GPS_ACTIVE) {
-        // if gps_update_interval is <=10s, GPS never goes off, so we treat that differently
-        uint32_t updateInterval = Default::getConfiguredOrDefaultMs(config.position.gps_update_interval);
+    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
+        fixHoldEnds = millis() + 20000;
+        shouldPublish = true; // Publish immediately, since next publish is at end of hold
+    }
 
-        // 1. Got a time for the first time
-        bool gotTime = (getRTCQuality() >= RTCQualityGPS);
-        if (!gotTime && lookForTime()) { // Note: we count on this && short-circuiting and not resetting the RTC time
-            gotTime = true;
-        }
+    bool tooLong = scheduling.searchedTooLong();
+    if (tooLong)
+        LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time");
 
-        // 2. Got a lock for the first time, or 3. Got a lock after turning back on
-        bool gotLoc = lookForLocation();
-        if (gotLoc) {
-#ifdef GPS_DEBUG
-            if (!hasValidLocation) { // declare that we have location ASAP
-                LOG_DEBUG("hasValidLocation RISING EDGE");
-            }
-#endif
-            if (updateInterval <= GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS) {
-                hasValidLocation = true;
-                shouldPublish = true;
-            } else if (!hasValidLocation || prev_fixQual == 0 || (fixHoldEnds + GPS_THREAD_INTERVAL) < millis()) {
-                hasValidLocation = true;
-                // Hold for up to 20secs after getting a lock to download ephemeris etc
-                uint32_t holdTime = updateInterval - GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS;
-                if (holdTime > GPS_FIX_HOLD_MAX_MS)
-                    holdTime = GPS_FIX_HOLD_MAX_MS;
-                fixHoldEnds = millis() + holdTime;
-#ifdef GPS_DEBUG
-                LOG_DEBUG("Holding for %ums after lock", holdTime);
-#endif
-            }
-        }
-
-        bool tooLong = scheduling.searchedTooLong();
+    // Once we get a location we no longer desperately want an update
+    if ((gotLoc && gotTime) || tooLong) {
         if (tooLong && !gotLoc) {
-            LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time");
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
-                p = meshtastic_Position_init_default;
-                hasValidLocation = false;
-                shouldPublish = true;
-#ifdef GPS_DEBUG
                 LOG_DEBUG("hasValidLocation FALLING EDGE");
-#endif
             }
+            p = meshtastic_Position_init_default;
+            hasValidLocation = false;
         }
-
-        // Hold has expired , Search time has expired, we got a time only, or we never needed to hold.
-        bool holdExpired = (fixHoldEnds != 0 && millis() > fixHoldEnds);
-        if (shouldPublish || tooLong || holdExpired) {
-            if (gotTime && hasValidLocation) {
-                shouldPublish = true;
-            }
-            if (shouldPublish) {
-                fixHoldEnds = 0;
-                publishUpdate();
-            }
-
-            // There's a chance we just got a time, so keep going to see if we can get a location too
-            if (tooLong || holdExpired) {
-                down();
-            }
-
+        if (millis() > fixHoldEnds) {
+            shouldPublish = true; // publish our update at the end of the lock hold
+            publishUpdate();
+            down();
 #ifdef GPS_DEBUG
-        } else if (fixHoldEnds != 0) {
+        } else {
             LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
 #endif
         }
     }
-    // ===================== end GPS_ACTIVE state ========================
+
+    // If state has changed do a publish
+    publishUpdate();
 
     if (config.position.fixed_position == true && hasValidLocation)
         return disable(); // This should trigger when we have a fixed position, and get that first position
@@ -1256,215 +1218,163 @@ static const char *DETECTED_MESSAGE = "%s detected";
 
 GnssModel_t GPS::probe(int serialSpeed)
 {
-    uint8_t buffer[768] = {0};
-
-    switch (currentStep) {
-    case 0: {
 #if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
-        _serial_gps->end();
-        _serial_gps->begin(serialSpeed);
+    _serial_gps->end();
+    _serial_gps->begin(serialSpeed);
 #elif defined(ARCH_RP2040)
-        _serial_gps->end();
-        _serial_gps->setFIFOSize(256);
-        _serial_gps->begin(serialSpeed);
+    _serial_gps->end();
+    _serial_gps->setFIFOSize(256);
+    _serial_gps->begin(serialSpeed);
 #else
-        if (_serial_gps->baudRate() != serialSpeed) {
-            LOG_DEBUG("Set GPS Baud to %i", serialSpeed);
-            _serial_gps->updateBaudRate(serialSpeed);
-        }
+    if (_serial_gps->baudRate() != serialSpeed) {
+        LOG_DEBUG("Set Baud to %i", serialSpeed);
+        _serial_gps->updateBaudRate(serialSpeed);
+    }
 #endif
 
-        memset(&ublox_info, 0, sizeof(ublox_info));
-        delay(100);
+    memset(&ublox_info, 0, sizeof(ublox_info));
+    uint8_t buffer[768] = {0};
+    delay(100);
 
-#if defined(PIN_GPS_RESET) && PIN_GPS_RESET != -1
-        digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
-        delay(10);
-        digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
+    // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
+    _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
+    delay(20);
+    // Close NMEA sequences on Ublox
+    _serial_gps->write("$PUBX,40,GLL,0,0,0,0,0,0*5C\r\n");
+    _serial_gps->write("$PUBX,40,GSV,0,0,0,0,0,0*59\r\n");
+    _serial_gps->write("$PUBX,40,VTG,0,0,0,0,0,0*5E\r\n");
+    delay(20);
+    // Close NMEA sequences on CM121
+    _serial_gps->write("$CFGMSG,0,1,0,1*1B\r\n");
+    _serial_gps->write("$CFGMSG,0,2,0,1*18\r\n");
+    _serial_gps->write("$CFGMSG,0,3,0,1*19\r\n");
+    delay(20);
 
-        // attempt to detect the chip based on boot messages
-        std::vector<ChipInfo> passive_detect = {
-            {"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
-            {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
-            {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352},
-            {"UC6580", "UC6580", GNSS_MODEL_UC6580},
-            // as L76K is sort of a last ditch effort, we won't attempt to detect it by startup messages for now.
-            /*{"L76K", "SW=URANUS", GNSS_MODEL_MTK}*/};
-        GnssModel_t detectedDriver = getProbeResponse(500, passive_detect, serialSpeed);
-        if (detectedDriver != GNSS_MODEL_UNKNOWN) {
-            return detectedDriver;
+    // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A,or CM121
+    std::vector<ChipInfo> unicore = {
+        {"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}, {"CM121", "CM121", GNSS_MODEL_CM121}};
+    PROBE_FAMILY("Unicore Family", "$PDTINFO", unicore, 500);
+
+    std::vector<ChipInfo> atgm = {
+        {"ATGM336H", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H},
+        /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS)) based on AT6558 */
+        {"ATGM332D", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H}};
+    PROBE_FAMILY("ATGM33xx Family", "$PCAS06,1*1A", atgm, 500);
+
+    /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
+    _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume
+    _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume
+    _serial_gps->write("$PAIR513*3D\r\n");     // save configuration
+    std::vector<ChipInfo> airoha = {{"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
+                                    {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
+                                    {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352}};
+    PROBE_FAMILY("Airoha Family", "$PAIR021*39", airoha, 1000);
+
+    PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500);
+    PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500);
+
+    // Close all NMEA sentences, valid for MTK3333 and MTK3339 platforms
+    _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
+    delay(20);
+    std::vector<ChipInfo> mtk = {{"L76B", "Quectel-L76B", GNSS_MODEL_MTK_L76B}, {"PA1010D", "1010D", GNSS_MODEL_MTK_PA1010D},
+                                 {"PA1616S", "1616S", GNSS_MODEL_MTK_PA1616S},  {"LS20031", "MC-1513", GNSS_MODEL_MTK_L76B},
+                                 {"L96", "Quectel-L96", GNSS_MODEL_MTK_L76B},   {"L80-R", "_3337_", GNSS_MODEL_MTK_L76B},
+                                 {"L80", "_3339_", GNSS_MODEL_MTK_L76B}};
+
+    PROBE_FAMILY("MTK Family", "$PMTK605*31", mtk, 500);
+
+    uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
+    UBXChecksum(cfg_rate, sizeof(cfg_rate));
+    clearBuffer();
+    _serial_gps->write(cfg_rate, sizeof(cfg_rate));
+    // Check that the returned response class and message ID are correct
+    GPS_RESPONSE response = getACK(0x06, 0x08, 750);
+    if (response == GNSS_RESPONSE_NONE) {
+        LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
+        return GNSS_MODEL_UNKNOWN;
+    } else if (response == GNSS_RESPONSE_FRAME_ERRORS) {
+        LOG_INFO("UBlox Frame Errors (baudrate %d)", serialSpeed);
+    }
+
+    memset(buffer, 0, sizeof(buffer));
+    uint8_t _message_MONVER[8] = {
+        0xB5, 0x62, // Sync message for UBX protocol
+        0x0A, 0x04, // Message class and ID (UBX-MON-VER)
+        0x00, 0x00, // Length of payload (we're asking for an answer, so no payload)
+        0x00, 0x00  // Checksum
+    };
+    //  Get Ublox gnss module hardware and software info
+    UBXChecksum(_message_MONVER, sizeof(_message_MONVER));
+    clearBuffer();
+    _serial_gps->write(_message_MONVER, sizeof(_message_MONVER));
+
+    uint16_t len = getACK(buffer, sizeof(buffer), 0x0A, 0x04, 1200);
+    if (len) {
+        uint16_t position = 0;
+        for (int i = 0; i < 30; i++) {
+            ublox_info.swVersion[i] = buffer[position];
+            position++;
+        }
+        for (int i = 0; i < 10; i++) {
+            ublox_info.hwVersion[i] = buffer[position];
+            position++;
         }
-#endif
-        // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
-        _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
-        delay(20);
-        // Close NMEA sequences on Ublox
-        _serial_gps->write("$PUBX,40,GLL,0,0,0,0,0,0*5C\r\n");
-        _serial_gps->write("$PUBX,40,GSV,0,0,0,0,0,0*59\r\n");
-        _serial_gps->write("$PUBX,40,VTG,0,0,0,0,0,0*5E\r\n");
-        delay(20);
-        // Close NMEA sequences on CM121
-        _serial_gps->write("$CFGMSG,0,1,0,1*1B\r\n");
-        _serial_gps->write("$CFGMSG,0,2,0,1*18\r\n");
-        _serial_gps->write("$CFGMSG,0,3,0,1*19\r\n");
-        currentDelay = 20;
-        currentStep = 1;
-        return GNSS_MODEL_UNKNOWN;
-    }
-    case 1: {
 
-        // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A,or CM121
-        std::vector<ChipInfo> unicore = {
-            {"UC6580", "UC6580", GNSS_MODEL_UC6580}, {"UM600", "UM600", GNSS_MODEL_UC6580}, {"CM121", "CM121", GNSS_MODEL_CM121}};
-        PROBE_FAMILY("Unicore Family", "$PDTINFO", unicore, 500);
-        currentDelay = 20;
-        currentStep = 2;
-        return GNSS_MODEL_UNKNOWN;
-    }
-    case 2: {
-        std::vector<ChipInfo> atgm = {
-            {"ATGM336H", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H},
-            /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS)) based on AT6558 */
-            {"ATGM332D", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H}};
-        PROBE_FAMILY("ATGM33xx Family", "$PCAS06,1*1A", atgm, 500);
-        currentDelay = 20;
-        currentStep = 3;
-        return GNSS_MODEL_UNKNOWN;
-    }
-    case 3: {
-        /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
-        _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume
-        _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume
-        _serial_gps->write("$PAIR513*3D\r\n");     // save configuration
-        std::vector<ChipInfo> airoha = {{"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
-                                        {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
-                                        {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352}};
-        PROBE_FAMILY("Airoha Family", "$PAIR021*39", airoha, 1000);
-        currentDelay = 20;
-        currentStep = 4;
-        return GNSS_MODEL_UNKNOWN;
-    }
-    case 4: {
-        PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500);
-        PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500);
-        currentDelay = 20;
-        currentStep = 5;
-        return GNSS_MODEL_UNKNOWN;
-    }
-    case 5: {
+        while (len >= position + 30) {
+            for (int i = 0; i < 30; i++) {
+                ublox_info.extension[ublox_info.extensionNo][i] = buffer[position];
+                position++;
+            }
+            ublox_info.extensionNo++;
+            if (ublox_info.extensionNo > 9)
+                break;
+        }
 
-        // Close all NMEA sentences, valid for MTK3333 and MTK3339 platforms
-        _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
-        delay(20);
-        std::vector<ChipInfo> mtk = {{"L76B", "Quectel-L76B", GNSS_MODEL_MTK_L76B}, {"PA1010D", "1010D", GNSS_MODEL_MTK_PA1010D},
-                                     {"PA1616S", "1616S", GNSS_MODEL_MTK_PA1616S},  {"LS20031", "MC-1513", GNSS_MODEL_MTK_L76B},
-                                     {"L96", "Quectel-L96", GNSS_MODEL_MTK_L76B},   {"L80-R", "_3337_", GNSS_MODEL_MTK_L76B},
-                                     {"L80", "_3339_", GNSS_MODEL_MTK_L76B}};
-
-        PROBE_FAMILY("MTK Family", "$PMTK605*31", mtk, 500);
-        currentDelay = 20;
-        currentStep = 6;
-        return GNSS_MODEL_UNKNOWN;
-    }
-    case 6: {
-        uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
-        UBXChecksum(cfg_rate, sizeof(cfg_rate));
-        clearBuffer();
-        _serial_gps->write(cfg_rate, sizeof(cfg_rate));
-        // Check that the returned response class and message ID are correct
-        GPS_RESPONSE response = getACK(0x06, 0x08, 750);
-        if (response == GNSS_RESPONSE_NONE) {
-            LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
-            currentDelay = 2000;
-            currentStep = 0;
-            return GNSS_MODEL_UNKNOWN;
-        } else if (response == GNSS_RESPONSE_FRAME_ERRORS) {
-            LOG_INFO("UBlox Frame Errors (baudrate %d)", serialSpeed);
+        LOG_DEBUG("Module Info : ");
+        LOG_DEBUG("Soft version: %s", ublox_info.swVersion);
+        LOG_DEBUG("Hard version: %s", ublox_info.hwVersion);
+        LOG_DEBUG("Extensions:%d", ublox_info.extensionNo);
+        for (int i = 0; i < ublox_info.extensionNo; i++) {
+            LOG_DEBUG("  %s", ublox_info.extension[i]);
         }
 
         memset(buffer, 0, sizeof(buffer));
-        uint8_t _message_MONVER[8] = {
-            0xB5, 0x62, // Sync message for UBX protocol
-            0x0A, 0x04, // Message class and ID (UBX-MON-VER)
-            0x00, 0x00, // Length of payload (we're asking for an answer, so no payload)
-            0x00, 0x00  // Checksum
-        };
-        //  Get Ublox gnss module hardware and software info
-        UBXChecksum(_message_MONVER, sizeof(_message_MONVER));
-        clearBuffer();
-        _serial_gps->write(_message_MONVER, sizeof(_message_MONVER));
 
-        uint16_t len = getACK(buffer, sizeof(buffer), 0x0A, 0x04, 1200);
-        if (len) {
-            uint16_t position = 0;
-            for (int i = 0; i < 30; i++) {
-                ublox_info.swVersion[i] = buffer[position];
-                position++;
-            }
-            for (int i = 0; i < 10; i++) {
-                ublox_info.hwVersion[i] = buffer[position];
-                position++;
-            }
-
-            while (len >= position + 30) {
-                for (int i = 0; i < 30; i++) {
-                    ublox_info.extension[ublox_info.extensionNo][i] = buffer[position];
-                    position++;
+        // tips: extensionNo field is 0 on some 6M GNSS modules
+        for (int i = 0; i < ublox_info.extensionNo; ++i) {
+            if (!strncmp(ublox_info.extension[i], "MOD=", 4)) {
+                strncpy((char *)buffer, &(ublox_info.extension[i][4]), sizeof(buffer));
+            } else if (!strncmp(ublox_info.extension[i], "PROTVER", 7)) {
+                char *ptr = nullptr;
+                memset(buffer, 0, sizeof(buffer));
+                strncpy((char *)buffer, &(ublox_info.extension[i][8]), sizeof(buffer));
+                LOG_DEBUG("Protocol Version:%s", (char *)buffer);
+                if (strlen((char *)buffer)) {
+                    ublox_info.protocol_version = strtoul((char *)buffer, &ptr, 10);
+                    LOG_DEBUG("ProtVer=%d", ublox_info.protocol_version);
+                } else {
+                    ublox_info.protocol_version = 0;
                 }
-                ublox_info.extensionNo++;
-                if (ublox_info.extensionNo > 9)
-                    break;
-            }
-
-            LOG_DEBUG("Module Info : ");
-            LOG_DEBUG("Soft version: %s", ublox_info.swVersion);
-            LOG_DEBUG("Hard version: %s", ublox_info.hwVersion);
-            LOG_DEBUG("Extensions:%d", ublox_info.extensionNo);
-            for (int i = 0; i < ublox_info.extensionNo; i++) {
-                LOG_DEBUG("  %s", ublox_info.extension[i]);
-            }
-
-            memset(buffer, 0, sizeof(buffer));
-
-            // tips: extensionNo field is 0 on some 6M GNSS modules
-            for (int i = 0; i < ublox_info.extensionNo; ++i) {
-                if (!strncmp(ublox_info.extension[i], "MOD=", 4)) {
-                    strncpy((char *)buffer, &(ublox_info.extension[i][4]), sizeof(buffer));
-                } else if (!strncmp(ublox_info.extension[i], "PROTVER", 7)) {
-                    char *ptr = nullptr;
-                    memset(buffer, 0, sizeof(buffer));
-                    strncpy((char *)buffer, &(ublox_info.extension[i][8]), sizeof(buffer));
-                    LOG_DEBUG("Protocol Version:%s", (char *)buffer);
-                    if (strlen((char *)buffer)) {
-                        ublox_info.protocol_version = strtoul((char *)buffer, &ptr, 10);
-                        LOG_DEBUG("ProtVer=%d", ublox_info.protocol_version);
-                    } else {
-                        ublox_info.protocol_version = 0;
-                    }
-                }
-            }
-            if (strncmp(ublox_info.hwVersion, "00040007", 8) == 0) {
-                LOG_INFO(DETECTED_MESSAGE, "U-blox 6", "6");
-                return GNSS_MODEL_UBLOX6;
-            } else if (strncmp(ublox_info.hwVersion, "00070000", 8) == 0) {
-                LOG_INFO(DETECTED_MESSAGE, "U-blox 7", "7");
-                return GNSS_MODEL_UBLOX7;
-            } else if (strncmp(ublox_info.hwVersion, "00080000", 8) == 0) {
-                LOG_INFO(DETECTED_MESSAGE, "U-blox 8", "8");
-                return GNSS_MODEL_UBLOX8;
-            } else if (strncmp(ublox_info.hwVersion, "00190000", 8) == 0) {
-                LOG_INFO(DETECTED_MESSAGE, "U-blox 9", "9");
-                return GNSS_MODEL_UBLOX9;
-            } else if (strncmp(ublox_info.hwVersion, "000A0000", 8) == 0) {
-                LOG_INFO(DETECTED_MESSAGE, "U-blox 10", "10");
-                return GNSS_MODEL_UBLOX10;
             }
         }
-    }
+        if (strncmp(ublox_info.hwVersion, "00040007", 8) == 0) {
+            LOG_INFO(DETECTED_MESSAGE, "U-blox 6", "6");
+            return GNSS_MODEL_UBLOX6;
+        } else if (strncmp(ublox_info.hwVersion, "00070000", 8) == 0) {
+            LOG_INFO(DETECTED_MESSAGE, "U-blox 7", "7");
+            return GNSS_MODEL_UBLOX7;
+        } else if (strncmp(ublox_info.hwVersion, "00080000", 8) == 0) {
+            LOG_INFO(DETECTED_MESSAGE, "U-blox 8", "8");
+            return GNSS_MODEL_UBLOX8;
+        } else if (strncmp(ublox_info.hwVersion, "00190000", 8) == 0) {
+            LOG_INFO(DETECTED_MESSAGE, "U-blox 9", "9");
+            return GNSS_MODEL_UBLOX9;
+        } else if (strncmp(ublox_info.hwVersion, "000A0000", 8) == 0) {
+            LOG_INFO(DETECTED_MESSAGE, "U-blox 10", "10");
+            return GNSS_MODEL_UBLOX10;
+        }
     }
     LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed);
-    currentDelay = 2000;
-    currentStep = 0;
     return GNSS_MODEL_UNKNOWN;
 }
 
@@ -1493,12 +1403,12 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
             }
 
             if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(response);
+#endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
                     if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
-#ifdef GPS_DEBUG
-                        LOG_DEBUG(response);
-#endif
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
                         delete[] response; // Cleanup before return
                         return chipInfo.driver;
@@ -1506,9 +1416,6 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
                 }
             }
             if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(response);
-#endif
                 // Reset the response buffer for the next potential message
                 responseLen = 0;
                 response[0] = '\0';
@@ -1527,7 +1434,10 @@ GPS *GPS::createGps()
     int8_t _rx_gpio = config.position.rx_gpio;
     int8_t _tx_gpio = config.position.tx_gpio;
     int8_t _en_gpio = config.position.gps_en_gpio;
-
+#if HAS_GPS && !defined(ARCH_ESP32)
+    _rx_gpio = 1; // We only specify GPS serial ports on ESP32. Otherwise, these are just flags.
+    _tx_gpio = 1;
+#endif
 #if defined(GPS_RX_PIN)
     if (!_rx_gpio)
         _rx_gpio = GPS_RX_PIN;
@@ -1592,6 +1502,8 @@ GPS *GPS::createGps()
 
 #ifdef PIN_GPS_RESET
     pinMode(PIN_GPS_RESET, OUTPUT);
+    digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
+    delay(10);
     digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
 
@@ -1601,28 +1513,16 @@ GPS *GPS::createGps()
         _serial_gps->setRxBufferSize(SERIAL_BUFFER_SIZE); // the default is 256
 #endif
 
-        LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
-        LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
-
 //  ESP32 has a special set of parameters vs other arduino ports
 #if defined(ARCH_ESP32)
+        LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio);
+        LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
 #elif defined(ARCH_RP2040)
-        _serial_gps->setPinout(new_gps->tx_gpio, new_gps->rx_gpio);
         _serial_gps->setFIFOSize(256);
         _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_NRF52)
-        _serial_gps->setPins(new_gps->rx_gpio, new_gps->tx_gpio);
-        _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_STM32WL)
-        _serial_gps->setTx(new_gps->tx_gpio);
-        _serial_gps->setRx(new_gps->rx_gpio);
-        _serial_gps->begin(GPS_BAUDRATE);
-#elif defined(ARCH_PORTDUINO)
-        // Portduino can't set the GPS pins directly.
-        _serial_gps->begin(GPS_BAUDRATE);
 #else
-#error Unsupported architecture!
+        _serial_gps->begin(GPS_BAUDRATE);
 #endif
     }
     return new_gps;

src/gps/GPS.h

@@ -16,9 +16,6 @@
 #define GPS_EN_ACTIVE 1
 #endif
 
-static constexpr uint32_t GPS_UPDATE_ALWAYS_ON_THRESHOLD_MS = 10 * 1000UL;
-static constexpr uint32_t GPS_FIX_HOLD_MAX_MS = 20000;
-
 typedef enum {
     GNSS_MODEL_ATGM336H,
     GNSS_MODEL_MTK,
@@ -154,8 +151,6 @@ class GPS : private concurrency::OSThread
     TinyGPSPlus reader;
     uint8_t fixQual = 0; // fix quality from GPGGA
     uint32_t lastChecksumFailCount = 0;
-    uint8_t currentStep = 0;
-    int32_t currentDelay = 2000;
 
 #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
     // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field
@@ -178,6 +173,8 @@ class GPS : private concurrency::OSThread
      */
     bool hasValidLocation = false; // default to false, until we complete our first read
 
+    bool isInPowersave = false;
+
     bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop()
 
     bool hasGPS = false; // Do we have a GPS we are talking to
@@ -194,8 +191,6 @@ class GPS : private concurrency::OSThread
     /** If !NULL we will use this serial port to construct our GPS */
 #if defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
-#elif defined(ARCH_NRF52)
-    static Uart *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
 #endif

src/gps/RTC.cpp

@@ -112,11 +112,7 @@ RTCSetResult readFromRTC()
 #elif defined(RX8130CE_RTC)
     if (rtc_found.address == RX8130CE_RTC) {
         uint32_t now = millis();
-#ifdef MUZI_BASE
-        ArtronShop_RX8130CE rtc(&Wire1);
-#else
         ArtronShop_RX8130CE rtc(&Wire);
-#endif
         tm t;
         if (rtc.getTime(&t)) {
             tv.tv_sec = gm_mktime(&t);
@@ -249,11 +245,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
         }
 #elif defined(RX8130CE_RTC)
         if (rtc_found.address == RX8130CE_RTC) {
-#ifdef MUZI_BASE
-            ArtronShop_RX8130CE rtc(&Wire1);
-#else
             ArtronShop_RX8130CE rtc(&Wire);
-#endif
             tm *t = gmtime(&tv->tv_sec);
             if (rtc.setTime(*t)) {
                 LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,
@@ -318,7 +310,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
 #ifdef BUILD_EPOCH
     if (tv.tv_sec < BUILD_EPOCH) {
         if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%lu) before build epoch (%lu)!", printableEpoch, BUILD_EPOCH);
+            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
             lastTimeValidationWarning = millis();
         }
         return RTCSetResultInvalidTime;
@@ -327,7 +319,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
             // Calculate max allowed time safely to avoid overflow in logging
             uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
             uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%lu) too far in the future (build epoch: %lu, max allowed: %lu)!", printableEpoch,
+            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
                      (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
             lastTimeValidationWarning = millis();
         }

src/graphics/Screen.cpp

@@ -69,11 +69,7 @@ using graphics::Emote;
 using graphics::emotes;
 using graphics::numEmotes;
 
-#if USE_TFTDISPLAY
 extern uint16_t TFT_MESH;
-#else
-uint16_t TFT_MESH = COLOR565(0x67, 0xEA, 0x94);
-#endif
 
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
 #include "mesh/wifi/WiFiAPClient.h"
@@ -230,9 +226,24 @@ void Screen::showTextInput(const char *header, const char *initialText, uint32_t
 {
     LOG_INFO("showTextInput called with header='%s', durationMs=%d", header ? header : "NULL", durationMs);
 
-    // Start OnScreenKeyboardModule session (non-touch variant)
-    OnScreenKeyboardModule::instance().start(header, initialText, durationMs, textCallback);
+    if (NotificationRenderer::virtualKeyboard) {
+        delete NotificationRenderer::virtualKeyboard;
+        NotificationRenderer::virtualKeyboard = nullptr;
+    }
+
+    NotificationRenderer::textInputCallback = nullptr;
+
+    NotificationRenderer::virtualKeyboard = new VirtualKeyboard();
+    if (header) {
+        NotificationRenderer::virtualKeyboard->setHeader(header);
+    }
+    if (initialText) {
+        NotificationRenderer::virtualKeyboard->setInputText(initialText);
+    }
+
+    // Set up callback with safer cleanup mechanism
     NotificationRenderer::textInputCallback = textCallback;
+    NotificationRenderer::virtualKeyboard->setCallback([textCallback](const std::string &text) { textCallback(text); });
 
     // Store the message and set the expiration timestamp (use same pattern as other notifications)
     strncpy(NotificationRenderer::alertBannerMessage, header ? header : "Text Input", 255);
@@ -313,7 +324,7 @@ static int8_t prevFrame = -1;
 // Combined dynamic node list frame cycling through LastHeard, HopSignal, and Distance modes
 // Uses a single frame and changes data every few seconds (E-Ink variant is separate)
 
-#if defined(ESP_PLATFORM) && (defined(USE_ST7789) || defined(USE_ST7796))
+#if defined(ESP_PLATFORM) && defined(USE_ST7789)
 SPIClass SPI1(HSPI);
 #endif
 
@@ -345,13 +356,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #else
     dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
 #endif
-#elif defined(USE_ST7796)
-#ifdef ESP_PLATFORM
-    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT, ST7796_SDA,
-                            ST7796_MISO, ST7796_SCK, TFT_SPI_FREQUENCY);
-#else
-    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
-#endif
+    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -364,7 +369,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
         LOG_INFO("SSD1306 init success");
     }
 #elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||    \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -394,12 +399,6 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
     isAUTOOled = true;
 #endif
 
-#if defined(USE_ST7789)
-    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
-#elif defined(USE_ST7796)
-    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
-#endif
-
     ui = new OLEDDisplayUi(dispdev);
     cmdQueue.setReader(this);
 }
@@ -436,14 +435,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
 
-#if defined(MUZI_BASE)
-            dispdev->init();
-            dispdev->setBrightness(brightness);
-            dispdev->flipScreenVertically();
-            dispdev->resetDisplay();
-            digitalWrite(SCREEN_12V_ENABLE, HIGH);
-            delay(100);
-#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -452,7 +443,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             if (uiconfig.screen_brightness == 1)
                 digitalWrite(PIN_EINK_EN, HIGH);
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness > 0)
+            if (uiconfig.screen_brightness == 1)
                 io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
 #endif
 
@@ -475,15 +466,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             pinMode(VTFT_LEDA, OUTPUT);
             digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
 #endif
-#endif
-#ifdef USE_ST7796
-            ui->init();
-#ifdef ESP_PLATFORM
-            analogWrite(VTFT_LEDA, BRIGHTNESS_DEFAULT);
-#else
-            pinMode(VTFT_LEDA, OUTPUT);
-            digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
-#endif
 #endif
             enabled = true;
             setInterval(0); // Draw ASAP
@@ -502,10 +484,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOff();
-
-#ifdef SCREEN_12V_ENABLE
-            digitalWrite(SCREEN_12V_ENABLE, LOW);
-#endif
 #ifdef USE_ST7789
             SPI1.end();
 #if defined(ARCH_ESP32)
@@ -522,21 +500,6 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             nrf_gpio_cfg_default(ST7789_NSS);
 #endif
 #endif
-#ifdef USE_ST7796
-            SPI1.end();
-#if defined(ARCH_ESP32)
-            pinMode(VTFT_LEDA, OUTPUT);
-            digitalWrite(VTFT_LEDA, LOW);
-            pinMode(ST7796_RESET, ANALOG);
-            pinMode(ST7796_RS, ANALOG);
-            pinMode(ST7796_NSS, ANALOG);
-#else
-            nrf_gpio_cfg_default(VTFT_LEDA);
-            nrf_gpio_cfg_default(ST7796_RESET);
-            nrf_gpio_cfg_default(ST7796_RS);
-            nrf_gpio_cfg_default(ST7796_NSS);
-#endif
-#endif
 
 #ifdef T_WATCH_S3
             PMU->disablePowerOutput(XPOWERS_ALDO2);
@@ -571,7 +534,7 @@ void Screen::setup()
         static_cast<AutoOLEDWire *>(dispdev)->setDetected(model);
 #endif
 
-#if defined(USE_SH1107_128_64) || defined(USE_SH1107)
+#ifdef USE_SH1107_128_64
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
@@ -579,13 +542,6 @@ void Screen::setup()
     // Apply custom RGB color (e.g. Heltec T114/T190)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #endif
-#if defined(MUZI_BASE)
-    dispdev->delayPoweron = true;
-#endif
-#if defined(USE_ST7796) && defined(TFT_MESH)
-    // Custom text color, if defined in variant.h
-    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
-#endif
 
     // === Initialize display and UI system ===
     ui->init();
@@ -645,12 +601,10 @@ void Screen::setup()
 #else
     if (!config.display.flip_screen) {
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||      \
-    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(HACKADAY_COMMUNICATOR)
+    defined(RAK14014) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
-#elif defined(USE_ST7796)
-        static_cast<ST7796Spi *>(dispdev)->mirrorScreen();
 #elif !defined(M5STACK_UNITC6L)
         dispdev->flipScreenVertically();
 #endif
@@ -683,7 +637,7 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK) && !HAS_CST226SE
+#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();
@@ -1474,9 +1428,6 @@ int Screen::handleStatusUpdate(const meshtastic::Status *arg)
         }
         nodeDB->updateGUI = false;
         break;
-    case STATUS_TYPE_POWER:
-        forceDisplay(true);
-        break;
     }
 
     return 0;
@@ -1498,14 +1449,14 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
             // Incoming message
             devicestate.has_rx_text_message = true; // Needed to include the message frame
             hasUnreadMessage = true;                // Enables mail icon in the header
-            setFrames(FOCUS_PRESERVE);              // Refresh frame list without switching view (no-op during text_input)
+            setFrames(FOCUS_PRESERVE);              // Refresh frame list without switching view
 
             // Only wake/force display if the configuration allows it
             if (shouldWakeOnReceivedMessage()) {
                 setOn(true);    // Wake up the screen first
                 forceDisplay(); // Forces screen redraw
             }
-            // === Prepare banner/popup content ===
+            // === Prepare banner content ===
             const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(packet->from);
             const meshtastic_Channel channel =
                 channels.getByIndex(packet->channel ? packet->channel : channels.getPrimaryIndex());
@@ -1529,84 +1480,38 @@ int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
 
             // Unlike generic messages, alerts (when enabled via the ext notif module) ignore any
             // 'mute' preferences set to any specific node or channel.
-            // If on-screen keyboard is active, show a transient popup over keyboard instead of interrupting it
-            if (NotificationRenderer::current_notification_type == notificationTypeEnum::text_input) {
-                // Wake and force redraw so popup is visible immediately
-                if (shouldWakeOnReceivedMessage()) {
-                    setOn(true);
-                    forceDisplay();
-                }
-
-                // Build popup: title = message source name, content = message text (sanitized)
-                // Title
-                char titleBuf[64] = {0};
+            if (isAlert) {
                 if (longName && longName[0]) {
-                    // Sanitize sender name
-                    std::string t = sanitizeString(longName);
-                    strncpy(titleBuf, t.c_str(), sizeof(titleBuf) - 1);
+                    snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
                 } else {
-                    strncpy(titleBuf, "Message", sizeof(titleBuf) - 1);
+                    strcpy(banner, "Alert Received");
                 }
-
-                // Content: payload bytes may not be null-terminated, remove ASCII_BELL and sanitize
-                char content[256] = {0};
-                {
-                    std::string raw;
-                    raw.reserve(packet->decoded.payload.size);
-                    for (size_t i = 0; i < packet->decoded.payload.size; ++i) {
-                        char c = msgRaw[i];
-                        if (c == ASCII_BELL)
-                            continue; // strip bell
-                        raw.push_back(c);
-                    }
-                    std::string sanitized = sanitizeString(raw);
-                    strncpy(content, sanitized.c_str(), sizeof(content) - 1);
-                }
-
-                NotificationRenderer::showKeyboardMessagePopupWithTitle(titleBuf, content, 3000);
-
-// Maintain existing buzzer behavior on M5 if applicable
+                screen->showSimpleBanner(banner, 3000);
+            } else if (!channel.settings.mute) {
+                if (longName && longName[0]) {
 #if defined(M5STACK_UNITC6L)
+                    strcpy(banner, "New Message");
+#else
+                    snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
+#endif
+
+                } else {
+                    strcpy(banner, "New Message");
+                }
+#if defined(M5STACK_UNITC6L)
+                screen->setOn(true);
+                screen->showSimpleBanner(banner, 1500);
                 if (config.device.buzzer_mode != meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY ||
                     (isAlert && moduleConfig.external_notification.alert_bell_buzzer) ||
-                    (!isBroadcast(packet->to) && isToUs(packet))) {
+                    (!isBroadcast(packet->to) && isToUs(p))) {
+                    // Beep if not in DIRECT_MSG_ONLY mode or if in DIRECT_MSG_ONLY mode and either
+                    // - packet contains an alert and alert bell buzzer is enabled
+                    // - packet is a non-broadcast that is addressed to this node
                     playLongBeep();
                 }
-#endif
-            } else {
-                // No keyboard active: use regular banner flow, respecting mute settings
-                if (isAlert) {
-                    if (longName && longName[0]) {
-                        snprintf(banner, sizeof(banner), "Alert Received from\n%s", longName);
-                    } else {
-                        strcpy(banner, "Alert Received");
-                    }
-                    screen->showSimpleBanner(banner, 3000);
-                } else if (!channel.settings.has_module_settings || !channel.settings.module_settings.is_muted) {
-                    if (longName && longName[0]) {
-#if defined(M5STACK_UNITC6L)
-                        strcpy(banner, "New Message");
 #else
-                        snprintf(banner, sizeof(banner), "New Message from\n%s", longName);
+                screen->showSimpleBanner(banner, 3000);
 #endif
-                    } else {
-                        strcpy(banner, "New Message");
-                    }
-#if defined(M5STACK_UNITC6L)
-                    screen->setOn(true);
-                    screen->showSimpleBanner(banner, 1500);
-                    if (config.device.buzzer_mode != meshtastic_Config_DeviceConfig_BuzzerMode_DIRECT_MSG_ONLY ||
-                        (isAlert && moduleConfig.external_notification.alert_bell_buzzer) ||
-                        (!isBroadcast(packet->to) && isToUs(packet))) {
-                        // Beep if not in DIRECT_MSG_ONLY mode or if in DIRECT_MSG_ONLY mode and either
-                        // - packet contains an alert and alert bell buzzer is enabled
-                        // - packet is a non-broadcast that is addressed to this node
-                        playLongBeep();
-                    }
-#else
-                    screen->showSimpleBanner(banner, 3000);
-#endif
-                }
             }
         }
     }
@@ -1641,7 +1546,6 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 
 int Screen::handleInputEvent(const InputEvent *event)
 {
-    LOG_INPUT("Screen Input event %u! kb %u", event->inputEvent, event->kbchar);
     if (!screenOn)
         return 0;
 
@@ -1689,12 +1593,6 @@ int Screen::handleInputEvent(const InputEvent *event)
                 showPrevFrame();
             } else if (event->inputEvent == INPUT_BROKER_RIGHT || event->inputEvent == INPUT_BROKER_USER_PRESS) {
                 showNextFrame();
-            } else if (event->inputEvent == INPUT_BROKER_UP_LONG) {
-                // Long press up button for fast frame switching
-                showPrevFrame();
-            } else if (event->inputEvent == INPUT_BROKER_DOWN_LONG) {
-                // Long press down button for fast frame switching
-                showNextFrame();
             } else if (event->inputEvent == INPUT_BROKER_SELECT) {
                 if (this->ui->getUiState()->currentFrame == framesetInfo.positions.home) {
                     menuHandler::homeBaseMenu();