Merge branch 'master' into lora-type

.trunk/trunk.yaml

@@ -9,14 +9,14 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.467
-    - renovate@41.91.3
+    - renovate@41.88.0
     - prettier@3.6.2
     - trufflehog@3.90.5
     - yamllint@1.37.1
     - bandit@1.8.6
     - trivy@0.65.0
     - taplo@0.10.0
-    - ruff@0.12.11
+    - ruff@0.12.10
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/c490bcd019e0658404088a61b96e653c9da22c45.zip
+  https://github.com/meshtastic/platform-native/archive/37d986499ce24511952d7146db72d667c6bdaff7.zip
 framework = arduino
 
 build_src_filter = 

arch/stm32/stm32.ini

@@ -50,7 +50,7 @@ lib_deps =
   ${radiolib_base.lib_deps}
 
   # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
-  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
+  https://github.com/caveman99/Crypto/archive/eae9c768054118a9399690f8af202853d1ae8516.zip
 
 lib_ignore =
   OneButton

bin/device-install.bat

@@ -14,11 +14,11 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
 SET "BIGDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite t-watch-s3"
 
 GOTO getopts
 :help
@@ -100,6 +100,7 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
+SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
@@ -141,7 +142,7 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %BPS_RESET% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL 1200 --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
     GOTO eof
 )
 
@@ -233,14 +234,14 @@ IF NOT EXIST !SPIFFS_FILENAME! CALL :LOG_MESSAGE ERROR "File does not exist: "!S
 
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash "!FILENAME!", but first erasing and writing system information..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase-flash || GOTO eof
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash 0x00 "!FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! erase_flash || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x00 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash BLEOTA "!OTA_FILENAME!" at OTA_OFFSET !OTA_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !OTA_OFFSET! "!OTA_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Trying to flash SPIFFS "!SPIFFS_FILENAME!" at SPIFFS_OFFSET !SPIFFS_OFFSET!..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash !SPIFFS_OFFSET! "!SPIFFS_FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -252,9 +253,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write-flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-install.sh

@@ -33,9 +33,10 @@ BIGDB_16MB=(
 	"m5stack-cores3"
 	"station-g2"
     "t-eth-elite"
-    "tlora-pager"
     "t-watch-s3"
-    "elecrow-adv"
+    "elecrow-adv-35-tft"
+    "elecrow-adv-24-28-tft"
+    "elecrow-adv1-43-50-70-tft"
 )
 S3_VARIANTS=(
     "s3"
@@ -46,7 +47,6 @@ S3_VARIANTS=(
     "station-g2"
     "unphone"
     "t-eth-elite"
-    "tlora-pager"
     "mesh-tab"
     "dreamcatcher"
     "ESP32-S3-Pico"
@@ -201,12 +201,12 @@ if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
     fi
 
     echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-    $ESPTOOL_CMD erase-flash
-    $ESPTOOL_CMD write-flash 0x00 "${FILENAME}"
+    $ESPTOOL_CMD erase_flash
+    $ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
     echo "Trying to flash ${OTAFILE} at offset ${OTA_OFFSET}"
-    $ESPTOOL_CMD write-flash $OTA_OFFSET "${OTAFILE}"
+    $ESPTOOL_CMD write_flash $OTA_OFFSET "${OTAFILE}"
     echo "Trying to flash ${SPIFFSFILE}, at offset ${OFFSET}"
-    $ESPTOOL_CMD write-flash $OFFSET "${SPIFFSFILE}"
+    $ESPTOOL_CMD write_flash $OFFSET "${SPIFFSFILE}"
 
 else
     show_help

bin/device-update.bat

@@ -133,7 +133,7 @@ IF %CHANGE_MODE% EQU 1 (
 
 @REM Flashing operations.
 CALL :LOG_MESSAGE INFO "Trying to flash update "!FILENAME!" at OFFSET 0x10000..."
-CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write-flash 0x10000 "!FILENAME!" || GOTO eof
+CALL :RUN_ESPTOOL !ESPTOOL_BAUD! write_flash 0x10000 "!FILENAME!" || GOTO eof
 
 CALL :LOG_MESSAGE INFO "Script complete!."
 
@@ -145,9 +145,9 @@ EXIT /B %ERRORLEVEL%
 :RUN_ESPTOOL
 @REM Subroutine used to run ESPTOOL_CMD with arguments.
 @REM Also handles %ERRORLEVEL%.
-@REM CALL :RUN_ESPTOOL [Baud] [erase-flash|write-flash] [OFFSET] [Filename]
+@REM CALL :RUN_ESPTOOL [Baud] [erase_flash|write_flash] [OFFSET] [Filename]
 @REM.
-@REM Example:: CALL :RUN_ESPTOOL 115200 write-flash 0x10000 "firmwarefile.bin"
+@REM Example:: CALL :RUN_ESPTOOL 115200 write_flash 0x10000 "firmwarefile.bin"
 IF %DEBUG% EQU 1 CALL :LOG_MESSAGE DEBUG "About to run command: !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4"
 CALL :RESET_ERROR
 !ESPTOOL_CMD! --baud %~1 %~2 %~3 %~4

bin/device-update.sh

@@ -75,7 +75,7 @@ fi
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
     echo "Trying to flash update ${FILENAME}"
-    $ESPTOOL_CMD --baud 115200 write-flash 0x10000 "${FILENAME}"
+    $ESPTOOL_CMD --baud 115200 write_flash 0x10000 "${FILENAME}"
 else
     show_help
     echo "Invalid file: ${FILENAME}"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,9 +87,6 @@
   </screenshots>
 
   <releases>
-    <release version="2.7.8" date="2025-08-30">
-      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
-    </release>
     <release version="2.7.7" date="2025-08-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
     </release>

boards/wiscore_rak3172.json

@@ -5,7 +5,7 @@
     },
     "core": "stm32",
     "cpu": "cortex-m4",
-    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_RAK3172_MODULE",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
     "f_cpu": "48000000L",
     "mcu": "stm32wle5ccu",
     "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.8.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.7.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -41,7 +41,4 @@ meshtasticd (2.7.8.0) UNRELEASED; urgency=medium
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
-  [  ]
-  * GitHub Actions Automatic version bump
-
- --  <github-actions[bot]@users.noreply.github.com>  Sat, 30 Aug 2025 00:26:04 +0000
+ -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 28 Aug 2025 10:33:25 +0000

platformio.ini

@@ -118,7 +118,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/8019704395b7539600d581330499208edcd80804.zip
+	https://github.com/meshtastic/device-ui/archive/a3e0e1be372d069f47b4c19d718f5267251744d7.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/DisplayFormatters.cpp

@@ -1,14 +1,7 @@
 #include "DisplayFormatters.h"
 
-const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                         bool usePreset)
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
 {
-
-    // If use_preset is false, always return "Custom"
-    if (!usePreset) {
-        return "Custom";
-    }
-
     switch (preset) {
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
         return useShortName ? "ShortT" : "ShortTurbo";

src/DisplayFormatters.h

@@ -4,6 +4,5 @@
 class DisplayFormatters
 {
   public:
-    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
-                                                 bool usePreset);
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
 };

src/Power.cpp

@@ -128,7 +128,6 @@ RAK9154Sensor rak9154Sensor;
 #ifdef HAS_PPM
 // note: XPOWERS_CHIP_XXX must be defined in variant.h
 #include <XPowersLib.h>
-XPowersPPM *PPM = NULL;
 #endif
 
 #ifdef HAS_BQ27220
@@ -682,7 +681,7 @@ bool Power::setup()
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
-    } else if (meshSolarInit()) {
+    }  else if (meshSolarInit()) {
         found = true;
     } else if (analogInit()) {
         found = true;
@@ -746,11 +745,7 @@ void Power::shutdown()
 
 #if HAS_SCREEN
     if (screen) {
-#ifdef T_DECK_PRO
-        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
-#else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
-#endif
     }
 #endif
 #if !defined(ARCH_STM32WL)
@@ -768,7 +763,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, true, true);
+    doDeepSleep(DELAY_FOREVER, false, true);
 #elif defined(ARCH_PORTDUINO)
     exit(EXIT_SUCCESS);
 #else
@@ -1325,6 +1320,7 @@ bool Power::lipoInit()
 class LipoCharger : public HasBatteryLevel
 {
   private:
+    XPowersPPM *ppm = nullptr;
     BQ27220 *bq = nullptr;
 
   public:
@@ -1333,41 +1329,41 @@ class LipoCharger : public HasBatteryLevel
      */
     bool runOnce()
     {
-        if (PPM == nullptr) {
-            PPM = new XPowersPPM;
-            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
+        if (ppm == nullptr) {
+            ppm = new XPowersPPM;
+            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
             if (result) {
                 LOG_INFO("PPM BQ25896 init succeeded");
                 // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // PPM->setSysPowerDownVoltage(3100);
+                // ppm->setSysPowerDownVoltage(3100);
 
                 // Set input current limit, default is 500mA
-                // PPM->setInputCurrentLimit(800);
+                // ppm->setInputCurrentLimit(800);
 
                 // Disable current limit pin
-                // PPM->disableCurrentLimitPin();
+                // ppm->disableCurrentLimitPin();
 
                 // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                PPM->setChargeTargetVoltage(4288);
+                ppm->setChargeTargetVoltage(4288);
 
                 // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // PPM->setPrechargeCurr(64);
+                // ppm->setPrechargeCurr(64);
 
                 // The premise is that limit pin is disabled, or it will
                 // only follow the maximum charging current set by limit pin.
                 // Set the charging current , Range:0~5056mA ,step:64mA
-                PPM->setChargerConstantCurr(1024);
+                ppm->setChargerConstantCurr(1024);
 
                 // To obtain voltage data, the ADC must be enabled first
-                PPM->enableMeasure();
+                ppm->enableMeasure();
 
                 // Turn on charging function
                 // If there is no battery connected, do not turn on the charging function
-                PPM->enableCharge();
+                ppm->enableCharge();
             } else {
                 LOG_WARN("PPM BQ25896 init failed");
-                delete PPM;
-                PPM = nullptr;
+                delete ppm;
+                ppm = nullptr;
                 return false;
             }
         }
@@ -1408,23 +1404,23 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
+    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
 
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
+    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
      */
     virtual bool isCharging() override
     {
-        bool isCharging = PPM->isCharging();
+        bool isCharging = ppm->isCharging();
         if (isCharging) {
             LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
         } else {
-            if (!PPM->isVbusIn()) {
+            if (!ppm->isVbusIn()) {
                 LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
             }
         }
@@ -1457,6 +1453,8 @@ bool Power::lipoChargerInit()
 }
 #endif
 
+
+
 #ifdef HELTEC_MESH_SOLAR
 #include "meshSolarApp.h"
 
@@ -1494,7 +1492,7 @@ class meshSolarBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
+    virtual bool isVbusIn() override { return meshSolarIsVbusIn();}
 
     /**
      * return true if the battery is currently charging

src/configuration.h

@@ -26,10 +26,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#if __has_include("Melopero_RV3028.h")
+#ifdef RV3028_RTC
 #include "Melopero_RV3028.h"
 #endif
-#if __has_include("pcf8563.h")
+#ifdef PCF8563_RTC
 #include "pcf8563.h"
 #endif
 

src/gps/GPS.cpp

@@ -843,6 +843,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         setPowerPMU(true);                                        // Power (PMU): on
         writePinStandby(false);                                   // Standby (pin): awake (not standby)
         setPowerUBLOX(true);                                      // Standby (UBLOX): awake
+#ifdef GNSS_AIROHA
+        lastFixStartMsec = 0;
+#endif
         break;
 
     case GPS_SOFTSLEEP:
@@ -860,7 +863,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep (not awake)
         setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
 
@@ -872,7 +877,9 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep
         setPowerUBLOX(false, 0);                                    // Standby (UBLOX): asleep, indefinitely
 #ifdef GNSS_AIROHA
-        digitalWrite(PIN_GPS_EN, LOW);
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
 #endif
         break;
     }
@@ -1055,8 +1062,6 @@ void GPS::down()
         }
         // If update interval long enough (or softsleep unsupported): hardsleep instead
         setPowerState(GPS_HARDSLEEP, sleepTime);
-        // Reset the fix quality to 0, since we're off.
-        fixQual = 0;
     }
 }
 
@@ -1116,19 +1121,11 @@ int32_t GPS::runOnce()
         shouldPublish = true;
     }
 
-    uint8_t prev_fixQual = fixQual;
     bool gotLoc = lookForLocation();
     if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
         LOG_DEBUG("hasValidLocation RISING EDGE");
         hasValidLocation = true;
         shouldPublish = true;
-        // Hold for 20secs after getting a lock to download ephemeris etc
-        fixHoldEnds = millis() + 20000;
-    }
-
-    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
-        fixHoldEnds = millis() + 20000;
-        shouldPublish = true; // Publish immediately, since next publish is at end of hold
     }
 
     bool tooLong = scheduling.searchedTooLong();
@@ -1137,7 +1134,8 @@ int32_t GPS::runOnce()
 
     // Once we get a location we no longer desperately want an update
     if ((gotLoc && gotTime) || tooLong) {
-        if (tooLong && !gotLoc) {
+
+        if (tooLong) {
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
                 LOG_DEBUG("hasValidLocation FALLING EDGE");
@@ -1145,15 +1143,9 @@ int32_t GPS::runOnce()
             p = meshtastic_Position_init_default;
             hasValidLocation = false;
         }
-        if (millis() > fixHoldEnds) {
-            shouldPublish = true; // publish our update at the end of the lock hold
-            publishUpdate();
-            down();
-#ifdef GPS_DEBUG
-        } else {
-            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
-#endif
-        }
+
+        down();
+        shouldPublish = true; // publish our update for this just finished acquisition window
     }
 
     // If state has changed do a publish
@@ -1516,6 +1508,24 @@ static int32_t toDegInt(RawDegrees d)
  */
 bool GPS::lookForTime()
 {
+
+#ifdef GNSS_AIROHA
+    uint8_t fix = reader.fixQuality();
+    if (fix >= 1 && fix <= 5) {
+        if (lastFixStartMsec > 0) {
+            if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                return false;
+            } else {
+                clearBuffer();
+            }
+        } else {
+            lastFixStartMsec = millis();
+            return false;
+        }
+    } else {
+        return false;
+    }
+#endif
     auto ti = reader.time;
     auto d = reader.date;
     if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
@@ -1554,6 +1564,25 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
  */
 bool GPS::lookForLocation()
 {
+#ifdef GNSS_AIROHA
+    if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
+        uint8_t fix = reader.fixQuality();
+        if (fix >= 1 && fix <= 5) {
+            if (lastFixStartMsec > 0) {
+                if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
+                    return false;
+                } else {
+                    clearBuffer();
+                }
+            } else {
+                lastFixStartMsec = millis();
+                return false;
+            }
+        } else {
+            return false;
+        }
+    }
+#endif
     // By default, TinyGPS++ does not parse GPGSA lines, which give us
     //   the 2D/3D fixType (see NMEAGPS.h)
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)

src/gps/GPS.h

@@ -159,7 +159,7 @@ class GPS : private concurrency::OSThread
     uint8_t fixType = 0;      // fix type from GPGSA
 #endif
 
-    uint32_t fixHoldEnds = 0;
+    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
 

src/gps/RTC.cpp

@@ -55,9 +55,9 @@ RTCSetResult readFromRTC()
 
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;
@@ -94,9 +94,9 @@ RTCSetResult readFromRTC()
 
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
+        timeStartMsec = now;
+        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
-            timeStartMsec = now;
-            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;
@@ -132,10 +132,6 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
     if (tv->tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
-    } else if (tv->tv_sec > (BUILD_EPOCH + FORTY_YEARS)) {
-        LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch, BUILD_EPOCH,
-                 BUILD_EPOCH + FORTY_YEARS);
-        return RTCSetResultInvalidTime;
     }
 #endif
 
@@ -254,10 +250,6 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     if (tv.tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
-    } else if (tv.tv_sec > (BUILD_EPOCH + FORTY_YEARS)) {
-        LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch, BUILD_EPOCH,
-                 BUILD_EPOCH + FORTY_YEARS);
-        return RTCSetResultInvalidTime;
     }
 #endif
 

src/gps/RTC.h

@@ -55,6 +55,3 @@ time_t gm_mktime(struct tm *tm);
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60
-#ifdef BUILD_EPOCH
-#define FORTY_YEARS (40UL * 365 * SEC_PER_DAY) // probably time to update your firmware
-#endif

src/graphics/EInkDisplay2.cpp

@@ -33,6 +33,7 @@
 */
 
 // Constructor
+
 EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
     // Set dimensions in OLEDDisplay base class
@@ -229,6 +230,12 @@ bool EInkDisplay::connect()
         adafruitDisplay->setRotation(0);
         adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
+#elif defined(LORA_TYPE)
+    auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
+    adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+    adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
+    adafruitDisplay->setRotation(3);
+    adafruitDisplay->setPartialWindow(0, 0, EPD_WIDTH, EPD_HEIGHT);
 #elif defined(M5_COREINK) || defined(T_DECK_PRO)
     auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
     adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);

src/graphics/draw/DebugRenderer.cpp

@@ -263,6 +263,12 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
             display->drawString(x + 1, y, "USB");
     }
 
+    //    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, true);
+
+    //    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
+    //    if (config.display.heading_bold)
+    //        display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
+
     uint32_t currentMillis = millis();
     uint32_t seconds = currentMillis / 1000;
     uint32_t minutes = seconds / 60;
@@ -392,7 +398,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
 
     // === Second Row: Radio Preset ===
-    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
     if (region != nullptr) {

src/input/cardKbI2cImpl.cpp

@@ -13,11 +13,7 @@ void CardKbI2cImpl::init()
     if (cardkb_found.address == 0x00) {
         LOG_DEBUG("Rescan for I2C keyboard");
         uint8_t i2caddr_scan[] = {CARDKB_ADDR, TDECK_KB_ADDR, BBQ10_KB_ADDR, MPR121_KB_ADDR, TCA8418_KB_ADDR};
-#if defined(T_LORA_PAGER)
         uint8_t i2caddr_asize = sizeof(i2caddr_scan) / sizeof(i2caddr_scan[0]);
-#else
-        uint8_t i2caddr_asize = 5;
-#endif
         auto i2cScanner = std::unique_ptr<ScanI2CTwoWire>(new ScanI2CTwoWire());
 
 #if WIRE_INTERFACES_COUNT == 2

src/main.cpp

@@ -419,7 +419,7 @@ void setup()
     struct timeval tv;
     tv.tv_sec = time(NULL);
     tv.tv_usec = 0;
-    perhapsSetRTC(RTCQualityDevice, &tv);
+    perhapsSetRTC(RTCQualityNTP, &tv);
 #endif
 
     powerMonInit();
@@ -859,14 +859,18 @@ void setup()
 #elif !defined(ARCH_ESP32) // ARCH_RP2040
     SPI.begin();
 #else
-        // ESP32
-#if defined(HW_SPI1_DEVICE)
+    // ESP32
+#ifdef LORA_TYPE
+    SPI.begin(PIN_EINK_SCLK, 15, PIN_EINK_MOSI, PIN_EINK_CS);
+    LOG_WARN("SPI.begin(SCK=%d, MISO=15, MOSI=%d, NSS=%d)\n", PIN_EINK_SCLK, PIN_EINK_MOSI, PIN_EINK_CS);
+#elif defined(HW_SPI1_DEVICE)
     SPI1.begin(LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
     LOG_DEBUG("SPI1.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
     SPI1.setFrequency(4000000);
 #else
     SPI.begin(LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
     LOG_DEBUG("SPI.begin(SCK=%d, MISO=%d, MOSI=%d, NSS=%d)", LORA_SCK, LORA_MISO, LORA_MOSI, LORA_CS);
+#endif
     SPI.setFrequency(4000000);
 #endif
 #endif
@@ -1211,6 +1215,10 @@ void setup()
     }
 #elif defined(HW_SPI1_DEVICE)
     LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI1, spiSettings);
+#elif LORA_TYPE
+    SPIClass radioSPI(VSPI);
+    radioSPI.begin(RF95_SCK, RF95_MISO, RF95_MOSI, RF95_NSS);
+    LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(radioSPI, spiSettings);
 #else // HW_SPI1_DEVICE
     LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings);
 #endif
@@ -1525,7 +1533,7 @@ extern meshtastic_DeviceMetadata getDeviceMetadata()
 #if ((!HAS_SCREEN || NO_EXT_GPIO) || MESHTASTIC_EXCLUDE_CANNEDMESSAGES) && !defined(MESHTASTIC_INCLUDE_NICHE_GRAPHICS)
     deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_CANNEDMSG_CONFIG;
 #endif
-#if NO_EXT_GPIO || MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
+#if NO_EXT_GPIO
     deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_EXTNOTIF_CONFIG;
 #endif
 // Only edge case here is if we apply this a device with built in Accelerometer and want to detect interrupts

src/mesh/Channels.cpp

@@ -368,7 +368,7 @@ const char *Channels::getName(size_t chIndex)
         // Per mesh.proto spec, if bandwidth is specified we must ignore modemPreset enum, we assume that in that case
         // the app effed up and forgot to set channelSettings.name
         if (config.lora.use_preset) {
-            channelName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
+            channelName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
         } else {
             channelName = "Custom";
         }
@@ -382,8 +382,7 @@ bool Channels::isDefaultChannel(ChannelIndex chIndex)
     const auto &ch = getByIndex(chIndex);
     if (ch.settings.psk.size == 1 && ch.settings.psk.bytes[0] == 1) {
         const char *name = getName(chIndex);
-        const char *presetName =
-            DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
+        const char *presetName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
         // Check if the name is the default derived from the modem preset
         if (strcmp(name, presetName) == 0)
             return true;

src/mesh/RadioInterface.cpp

@@ -586,8 +586,7 @@ void RadioInterface::applyModemConfig()
 
     // Check if we use the default frequency slot
     RadioInterface::uses_default_frequency_slot =
-        channel_num ==
-        hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset)) % numChannels;
+        channel_num == hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false)) % numChannels;
 
     // Old frequency selection formula
     // float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -360,7 +360,7 @@ extern const pb_msgdesc_t meshtastic_BackupPreferences_msg;
 /* Maximum encoded size of messages (where known) */
 /* meshtastic_NodeDatabase_size depends on runtime parameters */
 #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_BackupPreferences_size
-#define meshtastic_BackupPreferences_size        2273
+#define meshtastic_BackupPreferences_size        2271
 #define meshtastic_ChannelFile_size              718
 #define meshtastic_DeviceState_size              1737
 #define meshtastic_NodeInfoLite_size             196

src/mesh/generated/meshtastic/localonly.pb.h

@@ -188,7 +188,7 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg;
 /* Maximum encoded size of messages (where known) */
 #define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size
 #define meshtastic_LocalConfig_size              747
-#define meshtastic_LocalModuleConfig_size        671
+#define meshtastic_LocalModuleConfig_size        669
 
 #ifdef __cplusplus
 } /* extern "C" */

src/mesh/generated/meshtastic/module_config.pb.h

@@ -317,9 +317,6 @@ typedef struct _meshtastic_ModuleConfig_RangeTestConfig {
     /* Bool value indicating that this node should save a RangeTest.csv file.
  ESP32 Only */
     bool save;
-    /* Bool indicating that the node should cleanup / destroy it's RangeTest.csv file.
- ESP32 Only */
-    bool clear_on_reboot;
 } meshtastic_ModuleConfig_RangeTestConfig;
 
 /* Configuration for both device and environment metrics */
@@ -522,7 +519,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_SerialConfig_init_default {0, 0, 0, 0, _meshtastic_ModuleConfig_SerialConfig_Serial_Baud_MIN, 0, _meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MIN, 0}
 #define meshtastic_ModuleConfig_ExternalNotificationConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_StoreForwardConfig_init_default {0, 0, 0, 0, 0, 0}
-#define meshtastic_ModuleConfig_RangeTestConfig_init_default {0, 0, 0, 0}
+#define meshtastic_ModuleConfig_RangeTestConfig_init_default {0, 0, 0}
 #define meshtastic_ModuleConfig_TelemetryConfig_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_CannedMessageConfig_init_default {0, 0, 0, 0, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 #define meshtastic_ModuleConfig_AmbientLightingConfig_init_default {0, 0, 0, 0, 0}
@@ -538,7 +535,7 @@ extern "C" {
 #define meshtastic_ModuleConfig_SerialConfig_init_zero {0, 0, 0, 0, _meshtastic_ModuleConfig_SerialConfig_Serial_Baud_MIN, 0, _meshtastic_ModuleConfig_SerialConfig_Serial_Mode_MIN, 0}
 #define meshtastic_ModuleConfig_ExternalNotificationConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_StoreForwardConfig_init_zero {0, 0, 0, 0, 0, 0}
-#define meshtastic_ModuleConfig_RangeTestConfig_init_zero {0, 0, 0, 0}
+#define meshtastic_ModuleConfig_RangeTestConfig_init_zero {0, 0, 0}
 #define meshtastic_ModuleConfig_TelemetryConfig_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
 #define meshtastic_ModuleConfig_CannedMessageConfig_init_zero {0, 0, 0, 0, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, _meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_MIN, 0, 0, "", 0}
 #define meshtastic_ModuleConfig_AmbientLightingConfig_init_zero {0, 0, 0, 0, 0}
@@ -613,7 +610,6 @@ extern "C" {
 #define meshtastic_ModuleConfig_RangeTestConfig_enabled_tag 1
 #define meshtastic_ModuleConfig_RangeTestConfig_sender_tag 2
 #define meshtastic_ModuleConfig_RangeTestConfig_save_tag 3
-#define meshtastic_ModuleConfig_RangeTestConfig_clear_on_reboot_tag 4
 #define meshtastic_ModuleConfig_TelemetryConfig_device_update_interval_tag 1
 #define meshtastic_ModuleConfig_TelemetryConfig_environment_update_interval_tag 2
 #define meshtastic_ModuleConfig_TelemetryConfig_environment_measurement_enabled_tag 3
@@ -807,8 +803,7 @@ X(a, STATIC,   SINGULAR, BOOL,     is_server,         6)
 #define meshtastic_ModuleConfig_RangeTestConfig_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, BOOL,     enabled,           1) \
 X(a, STATIC,   SINGULAR, UINT32,   sender,            2) \
-X(a, STATIC,   SINGULAR, BOOL,     save,              3) \
-X(a, STATIC,   SINGULAR, BOOL,     clear_on_reboot,   4)
+X(a, STATIC,   SINGULAR, BOOL,     save,              3)
 #define meshtastic_ModuleConfig_RangeTestConfig_CALLBACK NULL
 #define meshtastic_ModuleConfig_RangeTestConfig_DEFAULT NULL
 
@@ -906,7 +901,7 @@ extern const pb_msgdesc_t meshtastic_RemoteHardwarePin_msg;
 #define meshtastic_ModuleConfig_MapReportSettings_size 14
 #define meshtastic_ModuleConfig_NeighborInfoConfig_size 10
 #define meshtastic_ModuleConfig_PaxcounterConfig_size 30
-#define meshtastic_ModuleConfig_RangeTestConfig_size 12
+#define meshtastic_ModuleConfig_RangeTestConfig_size 10
 #define meshtastic_ModuleConfig_RemoteHardwareConfig_size 96
 #define meshtastic_ModuleConfig_SerialConfig_size 28
 #define meshtastic_ModuleConfig_StoreForwardConfig_size 24

src/modules/ExternalNotificationModule.cpp

@@ -364,10 +364,9 @@ ExternalNotificationModule::ExternalNotificationModule()
     // moduleConfig.external_notification.alert_message_buzzer = true;
 
     if (moduleConfig.external_notification.enabled) {
-#if !defined(MESHTASTIC_EXCLUDE_INPUTBROKER)
         if (inputBroker) // put our callback in the inputObserver list
             inputObserver.observe(inputBroker);
-#endif
+
         if (nodeDB->loadProto(rtttlConfigFile, meshtastic_RTTTLConfig_size, sizeof(meshtastic_RTTTLConfig),
                               &meshtastic_RTTTLConfig_msg, &rtttlConfig) != LoadFileResult::LOAD_SUCCESS) {
             memset(rtttlConfig.ringtone, 0, sizeof(rtttlConfig.ringtone));

src/modules/Modules.cpp

@@ -88,7 +88,7 @@
 #include "modules/StoreForwardModule.h"
 #endif
 #endif
-
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
 #include "modules/ExternalNotificationModule.h"
 #endif
@@ -98,6 +98,7 @@
 #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !MESHTASTIC_EXCLUDE_SERIAL
 #include "modules/SerialModule.h"
 #endif
+#endif
 
 #if !MESHTASTIC_EXCLUDE_DROPZONE
 #include "modules/DropzoneModule.h"
@@ -245,8 +246,8 @@ void setupModules()
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_POWER_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         new PowerTelemetryModule();
 #endif
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)) &&                             \
-    !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
+    !defined(CONFIG_IDF_TARGET_ESP32C3)
 #if !MESHTASTIC_EXCLUDE_SERIAL
         if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
             new SerialModule();
@@ -267,11 +268,13 @@ void setupModules()
         storeForwardModule = new StoreForwardModule();
 #endif
 #endif
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
         externalNotificationModule = new ExternalNotificationModule();
 #endif
 #if !MESHTASTIC_EXCLUDE_RANGETEST && !MESHTASTIC_EXCLUDE_GPS
         new RangeTestModule();
+#endif
 #endif
     } else {
 #if !MESHTASTIC_EXCLUDE_ADMIN

src/modules/RangeTestModule.cpp

@@ -31,7 +31,7 @@ uint32_t packetSequence = 0;
 
 int32_t RangeTestModule::runOnce()
 {
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_STM32WL) || defined(ARCH_PORTDUINO)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_PORTDUINO)
 
     /*
         Uncomment the preferences below if you want to use the module
@@ -130,7 +130,7 @@ void RangeTestModuleRadio::sendPayload(NodeNum dest, bool wantReplies)
 
 ProcessMessage RangeTestModuleRadio::handleReceived(const meshtastic_MeshPacket &mp)
 {
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_STM32WL) || defined(ARCH_PORTDUINO)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_PORTDUINO)
 
     if (moduleConfig.range_test.enabled) {
 

src/modules/SerialModule.cpp

@@ -49,8 +49,8 @@
 #include "meshSolarApp.h"
 #endif
 
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)) &&                             \
-    !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
+    !defined(CONFIG_IDF_TARGET_ESP32C3)
 
 #define RX_BUFFER 256
 #define TIMEOUT 250
@@ -67,7 +67,7 @@ SerialModuleRadio *serialModuleRadio;
     defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE)
 SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial;
-#elif defined(CONFIG_IDF_TARGET_ESP32C6) || defined(RAK3172)
+#elif defined(CONFIG_IDF_TARGET_ESP32C6)
 SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial1;
 #else
@@ -173,18 +173,7 @@ int32_t SerialModule::runOnce()
                 Serial.begin(baud);
                 Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
             }
-#elif defined(ARCH_STM32WL)
-#ifndef RAK3172
-            HardwareSerial *serialInstance = &Serial2;
-#else
-            HardwareSerial *serialInstance = &Serial1;
-#endif
-            if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
-                serialInstance->setTx(moduleConfig.serial.txd);
-                serialInstance->setRx(moduleConfig.serial.rxd);
-            }
-            serialInstance->begin(baud);
-            serialInstance->setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
+
 #elif defined(ARCH_ESP32)
 
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
@@ -271,13 +260,8 @@ int32_t SerialModule::runOnce()
                 while (Serial1.available()) {
                     serialPayloadSize = Serial1.readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 #else
-#ifndef RAK3172
-                HardwareSerial *serialInstance = &Serial2;
-#else
-                HardwareSerial *serialInstance = &Serial1;
-#endif
-                while (serialInstance->available()) {
-                    serialPayloadSize = serialInstance->readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
+                while (Serial2.available()) {
+                    serialPayloadSize = Serial2.readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 #endif
                     serialModuleRadio->sendPayload();
                 }
@@ -527,7 +511,7 @@ ParsedLine parseLine(const char *line)
 void SerialModule::processWXSerial()
 {
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&              \
-    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5) && !defined(ARCH_STM32WL)
+    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
     static double dir_sum_sin = 0;

src/modules/SerialModule.h

@@ -8,8 +8,8 @@
 #include <Arduino.h>
 #include <functional>
 
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)) &&                             \
-    !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
+    !defined(CONFIG_IDF_TARGET_ESP32C3)
 
 class SerialModule : public StreamAPI, private concurrency::OSThread
 {

src/platform/esp32/architecture.h

@@ -154,6 +154,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_SENSELORA_S3
 #elif defined(HELTEC_HT62)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_HT62
+#elif defined(LORA_TYPE)
+#define HW_VENDOR meshtastic_HardwareModel_LORA_TYPE
 #elif defined(CHATTER_2)
 #define HW_VENDOR meshtastic_HardwareModel_CHATTER_2
 #elif defined(STATION_G2)

src/sleep.cpp

@@ -32,16 +32,6 @@ esp_sleep_source_t wakeCause; // the reason we booted this time
 #endif
 #include "Throttle.h"
 
-#ifdef USE_XL9555
-#include "ExtensionIOXL9555.hpp"
-extern ExtensionIOXL9555 io;
-#endif
-
-#ifdef HAS_PPM
-#include <XPowersLib.h>
-extern XPowersPPM *PPM;
-#endif
-
 #ifndef INCLUDE_vTaskSuspend
 #define INCLUDE_vTaskSuspend 0
 #endif
@@ -307,14 +297,6 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
 #endif
 #endif
 
-#ifdef HAS_PPM
-    if (PPM) {
-        LOG_INFO("PMM shutdown");
-        console->flush();
-        PPM->shutdown();
-    }
-#endif
-
 #ifdef HAS_PMU
     if (pmu_found && PMU) {
         // Obsolete comment: from back when we we used to receive lora packets while CPU was in deep sleep.
@@ -430,16 +412,6 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     if (pmu_found)
         gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
 #endif
-
-#ifdef T_LORA_PAGER
-    LOG_DEBUG("power down XL9555 io");
-    io.digitalWrite(EXPANDS_DRV_EN, LOW);
-    io.digitalWrite(EXPANDS_AMP_EN, LOW);
-    io.digitalWrite(EXPANDS_KB_EN, LOW);
-    io.digitalWrite(EXPANDS_SD_EN, LOW);
-    io.digitalWrite(EXPANDS_GPIO_EN, LOW);
-#endif
-
     auto res = esp_sleep_enable_gpio_wakeup();
     if (res != ESP_OK) {
         LOG_ERROR("esp_sleep_enable_gpio_wakeup result %d", res);
@@ -480,14 +452,6 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
         gpio_wakeup_disable((gpio_num_t)RF95_IRQ);
     }
 #endif
-#ifdef T_LORA_PAGER
-    LOG_DEBUG("power up XL9555 io");
-    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
-    io.digitalWrite(EXPANDS_AMP_EN, HIGH);
-    io.digitalWrite(EXPANDS_KB_EN, HIGH);
-    io.digitalWrite(EXPANDS_SD_EN, HIGH);
-    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
-#endif
 
     esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
     notifyLightSleepEnd.notifyObservers(cause); // Button interrupts are reattached here

variants/lora_type/platformio.ini

@@ -0,0 +1,16 @@
+[env:lora_type]
+extends = esp32_base
+board = esp32doit-devkit-v1
+board_level = extra
+build_flags =
+  ${esp32_base.build_flags}
+  -DLORA_TYPE
+  -DEBYTE_E22
+  -Ivariants/lora_type
+  -DEPD_HEIGHT=200
+  -DEPD_WIDTH=200
+  -DEINK_DISPLAY_MODEL=GxEPD2_154_GDEY0154D67
+  -DM5_COREINK 
+lib_deps = 
+  ${esp32_base.lib_deps}
+  zinggjm/GxEPD2@^1.4.9

variants/lora_type/variant.h

@@ -0,0 +1,37 @@
+#define BUTTON_PIN 39  // The middle button GPIO on the T-Beam
+#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_MULTIPLIER 2.0 // (R1 = 27k, R2 = 100k)
+#define LED_PIN 33           // add status LED (compatible with core-pcb and DIY targets)
+
+#define LORA_DIO0 RADIOLIB_NC  // a No connect on the SX1262/SX1268 module
+#define LORA_RESET 16 // RST for SX1276, and for SX1262/SX1268
+#define LORA_DIO1 4  // IRQ for SX1262/SX1268
+#define LORA_DIO2 26  // BUSY for SX1262/SX1268
+#define LORA_DIO3     // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
+
+#define RF95_SCK 18
+#define RF95_MISO 19
+#define RF95_MOSI 23
+#define RF95_NSS 5
+
+#define USE_SX1262
+
+#define SX126X_CS 5 // NSS for SX126X
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_RXEN 25
+#define SX126X_TXEN RADIOLIB_NC
+#define SX126X_DIO2_AS_RF_SWITCH
+
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define USE_EINK
+#define PIN_EINK_EN -1   // N/C
+#define PIN_EINK_CS 15   // EPD_CS
+#define PIN_EINK_BUSY 27 // EPD_BUSY
+#define PIN_EINK_DC 12   // EPD_D/C
+#define PIN_EINK_RES 32  // Connected but not needed
+#define PIN_EINK_SCLK 14 // EPD_SCLK
+#define PIN_EINK_MOSI 13 // GxEPD2_EPDEPD_MOSI

variants/native/portduino/platformio.ini

@@ -3,10 +3,7 @@ extends = portduino_base
 build_flags = ${portduino_base.build_flags} -I variants/native/portduino
   -I /usr/include
 board = cross_platform
-lib_deps = 
-  ${portduino_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
-
+lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}
 
 [env:native]

variants/native/portduino/variant.h

@@ -4,7 +4,4 @@
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define HAS_GPS 1
 #define MAX_RX_TOPHONE settingsMap[maxtophone]
-#define MAX_NUM_NODES settingsMap[maxnodes]
-
-// RAK12002 RTC Module
-#define RV3028_RTC (uint8_t)0b1010010
+#define MAX_NUM_NODES settingsMap[maxnodes]

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -208,7 +208,7 @@ No longer populated on PCB
 #undef AREF_VOLTAGE
 #define AREF_VOLTAGE 3.0
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
-#define ADC_MULTIPLIER (4.99F)
+#define ADC_MULTIPLIER (4.90F)
 
 #define HAS_RTC 0
 #ifdef __cplusplus

variants/nrf52840/tracker-t1000-e/variant.h

@@ -124,7 +124,8 @@ extern "C" {
 #define GPS_RTC_INT (0 + 15)     // P0.15, normal is LOW, wake by HIGH
 #define GPS_RESETB_OUT (32 + 14) // P1.14, always input pull_up
 
-#define BATTERY_PIN 2 // P0.02/AIN0, BAT_ADC
+#define GPS_FIX_HOLD_TIME 15000 // ms
+#define BATTERY_PIN 2           // P0.02/AIN0, BAT_ADC
 #define BATTERY_IMMUTABLE
 #define ADC_MULTIPLIER (2.0F)
 // P0.04/AIN2 is VCC_ADC, P0.05/AIN3 is CHARGER_DET, P1.03 is CHARGE_STA, P1.04 is CHARGE_DONE

variants/nrf52840/wio-t1000-s/variant.h

@@ -123,6 +123,7 @@ extern "C" {
 #define GPS_RESETB_OUT (32 + 14) // P1.14, awlays input pull_up
 
 // #define GPS_THREAD_INTERVAL 50
+#define GPS_FIX_HOLD_TIME 15000 // ms
 
 #define BATTERY_PIN 2
 // #define ADC_CHANNEL ADC1_GPIO2_CHANNEL
@@ -156,4 +157,4 @@ extern "C" {
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif // _VARIANT_WIO_SDK_WM1110_
+#endif // _VARIANT_WIO_SDK_WM1110_

variants/stm32/rak3172/platformio.ini

@@ -6,10 +6,6 @@ board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
 build_flags =
   ${stm32_base.build_flags}
   -Ivariants/stm32/rak3172
-  -DRAK3172
-  -DENABLE_HWSERIAL1
-  -DPIN_SERIAL1_RX=PB7
-  -DPIN_SERIAL1_TX=PB6
   -DPIN_WIRE_SDA=PA11
   -DPIN_WIRE_SCL=PA12
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 7
-build = 8
+build = 7