WIP

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

.devcontainer/Dockerfile

@@ -1,7 +1,7 @@
 # trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore-all(hadolint/DL3008): Do not pin apt package versions
 # trunk-ignore-all(hadolint/DL3013): Do not pin pip package versions
-FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
+FROM mcr.microsoft.com/devcontainers/cpp:2-debian-13
 
 USER root
 

.devcontainer/devcontainer.json

@@ -8,7 +8,7 @@
   "features": {
     "ghcr.io/devcontainers/features/python:1": {
       "installTools": true,
-      "version": "3.13"
+      "version": "3.14"
     }
   },
   "customizations": {

.github/actions/build-variant/action.yml

@@ -100,7 +100,7 @@ runs:
       id: version
 
     - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v5
       with:
         name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true

.github/workflows/build_debian_src.yml

@@ -64,7 +64,7 @@ jobs:
           PKG_VERSION: ${{ steps.version.outputs.deb }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           overwrite: true

.github/workflows/build_firmware.yml

@@ -56,7 +56,7 @@ jobs:
           ota_firmware_target: ${{ steps.ota_dir.outputs.tgt || '' }}
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         id: upload
         with:
           name: firmware-${{ inputs.platform }}-${{ inputs.pio_env }}-${{ inputs.version }}.zip

.github/workflows/build_one_arch.yml

@@ -113,7 +113,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{inputs.arch}}-*
@@ -126,7 +126,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -142,7 +142,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -161,7 +161,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{inputs.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/build_one_target.yml

@@ -119,7 +119,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-*-*
@@ -132,7 +132,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{inputs.target}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -148,7 +148,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-*-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -167,7 +167,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{inputs.target}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{inputs.target}}-${{ needs.version.outputs.long }}.zip
           overwrite: true

.github/workflows/main_matrix.yml

@@ -168,7 +168,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -181,7 +181,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -197,7 +197,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -216,7 +216,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -261,14 +261,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -318,7 +318,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -335,7 +335,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -373,7 +373,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/merge_queue.yml

@@ -147,7 +147,7 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           path: ./
           pattern: firmware-${{matrix.arch}}-*
@@ -160,7 +160,7 @@ jobs:
         run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           overwrite: true
@@ -176,7 +176,7 @@ jobs:
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -195,7 +195,7 @@ jobs:
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           overwrite: true
@@ -240,14 +240,14 @@ jobs:
             Autogenerated by github action, developer should edit as required before publishing...
 
       - name: Download source deb
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: firmware-debian-${{ needs.version.outputs.deb }}~UNRELEASED-src
           merge-multiple: true
           path: ./output/debian-src
 
       - name: Download `native-tft` pio deps
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: platformio-deps-native-tft-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -297,7 +297,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}
           merge-multiple: true
@@ -314,7 +314,7 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip ./output
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           name: debug-elfs-${{matrix.arch}}-${{ needs.version.outputs.long }}.zip
           merge-multiple: true
@@ -352,7 +352,7 @@ jobs:
         with:
           python-version: 3.x
 
-      - uses: actions/download-artifact@v5
+      - uses: actions/download-artifact@v6
         with:
           pattern: firmware-{${{ env.targets }}}-${{ needs.version.outputs.long }}
           merge-multiple: true

.github/workflows/package_obs.yml

@@ -58,7 +58,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/package_pio_deps.yml

@@ -56,7 +56,7 @@ jobs:
           PLATFORMIO_CORE_DIR: pio/core
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-deps-${{ inputs.pio_env }}-${{ steps.version.outputs.long }}
           overwrite: true

.github/workflows/package_ppa.yml

@@ -60,7 +60,7 @@ jobs:
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
           merge-multiple: true

.github/workflows/pr_tests.yml

@@ -50,7 +50,7 @@ jobs:
 
       - name: Download test artifacts
         if: needs.native-tests.result != 'skipped'
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true

.github/workflows/sec_sast_semgrep_cron.yml

@@ -33,7 +33,7 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: report.sarif
           overwrite: true

.github/workflows/test_native.yml

@@ -59,7 +59,7 @@ jobs:
         id: version
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
@@ -94,7 +94,7 @@ jobs:
 
       - name: Save test results
         if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           overwrite: true
@@ -108,7 +108,7 @@ jobs:
           sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
 
       - name: Save coverage information
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         if: always() # run this step even if previous step failed
         with:
           name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
@@ -137,20 +137,20 @@ jobs:
         id: version
 
       - name: Download test artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           name: platformio-test-report-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.1
+        uses: dorny/test-reporter@v2.2.0
         with:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
 
       - name: Download coverage artifacts
-        uses: actions/download-artifact@v5
+        uses: actions/download-artifact@v6
         with:
           pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report
@@ -163,7 +163,7 @@ jobs:
           genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
 
       - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@v5
         with:
           name: code-coverage-report-${{ steps.version.outputs.long }}.zip
           path: code-coverage-report

.github/workflows/tests.yml

@@ -49,7 +49,7 @@ jobs:
       - name: Setup Node
         uses: actions/setup-node@v6
         with:
-          node-version: 22
+          node-version: 24
 
       - name: Setup pnpm
         uses: pnpm/action-setup@v4

.trunk/trunk.yaml

@@ -8,15 +8,15 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.483
-    - renovate@41.148.2
+    - checkov@3.2.492
+    - renovate@42.5.4
     - prettier@3.6.2
-    - trufflehog@3.90.8
+    - trufflehog@3.90.13
     - yamllint@1.37.1
     - bandit@1.8.6
     - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.0
+    - ruff@0.14.4
     - isort@7.0.0
     - markdownlint@0.45.0
     - oxipng@9.1.5
@@ -26,9 +26,9 @@ lint:
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.9.0
+    - black@25.11.0
     - git-diff-check
-    - gitleaks@8.28.0
+    - gitleaks@8.29.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

alpine.Dockerfile

@@ -8,7 +8,8 @@ ARG PIO_ENV=native
 ENV PIP_ROOT_USER_ACTION=ignore
 
 RUN apk --no-cache add \
-        bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
+        bash g++ libstdc++-dev linux-headers zip git ca-certificates libbsd-dev \
+        libgpiod-dev yaml-cpp-dev bluez-dev \
         libusb-dev i2c-tools-dev libuv-dev openssl-dev pkgconf argp-standalone \
         libx11-dev libinput-dev libxkbcommon-dev \
     && rm -rf /var/cache/apk/* \
@@ -40,8 +41,8 @@ LABEL org.opencontainers.image.title="Meshtastic" \
 USER root
 
 RUN apk --no-cache add \
-        shadow libstdc++ libgpiod yaml-cpp libusb i2c-tools libuv \
-        libx11 libinput libxkbcommon \
+        shadow libstdc++ libbsd libgpiod yaml-cpp libusb \
+        i2c-tools libuv libx11 libinput libxkbcommon \
     && rm -rf /var/cache/apk/* \
     && mkdir -p /var/lib/meshtasticd \
     && mkdir -p /etc/meshtasticd/config.d \

arch/portduino/portduino.ini

@@ -2,7 +2,7 @@
 [portduino_base]
 platform =
   # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
-  https://github.com/meshtastic/platform-native/archive/d3f6e339534233c7217818867368767590ce549e.zip
+  https://github.com/meshtastic/platform-native/archive/f566d364204416cdbf298e349213f7d551f793d9.zip
 framework = arduino
 
 build_src_filter = 

bin/device-install.bat

@@ -15,12 +15,12 @@ SET "LOGCOUNTER=0"
 SET "BPS_RESET=0"
 
 @REM FIXME: Determine mcu from PlatformIO variant, this is unmaintainable.
-SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv"
+SET "S3=s3 v3 t-deck wireless-paper wireless-tracker station-g2 unphone t-eth-elite tlora-pager mesh-tab dreamcatcher ESP32-S3-Pico seeed-sensecap-indicator heltec_capsule_sensor_v3 vision-master icarus tracksenger elecrow-adv heltec-v4"
 SET "C3=esp32c3"
 @REM FIXME: Determine flash size from PlatformIO variant, this is unmaintainable.
 SET "BIGDB_8MB=crowpanel-esp32s3 heltec_capsule_sensor_v3 heltec-v3 heltec-vision-master-e213 heltec-vision-master-e290 heltec-vision-master-t190 heltec-wireless-paper heltec-wireless-tracker heltec-wsl-v3 icarus seeed-xiao-s3 tbeam-s3-core tracksenger"
 SET "MUIDB_8MB=picomputer-s3 unphone seeed-sensecap-indicator"
-SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv"
+SET "BIGDB_16MB=t-deck mesh-tab t-energy-s3 dreamcatcher ESP32-S3-Pico m5stack-cores3 station-g2 t-eth-elite tlora-pager t-watch-s3 elecrow-adv heltec-v4"
 
 GOTO getopts
 :help

bin/device-install.sh

@@ -31,21 +31,23 @@ MUIDB_8MB=(
     "seeed-sensecap-indicator"
 )
 BIGDB_16MB=(
-    "t-deck"
-    "mesh-tab"
-    "t-energy-s3"
     "dreamcatcher"
-    "ESP32-S3-Pico"
-    "m5stack-cores3"
-    "station-g2"
-    "t-eth-elite"
-    "tlora-pager"
-    "t-watch-s3"
     "elecrow-adv"
+    "ESP32-S3-Pico"
+    "heltec-v4"
+    "m5stack-cores3"
+    "mesh-tab"
+    "station-g2"
+    "t-deck"
+    "t-energy-s3"
+    "t-eth-elite"
+    "t-watch-s3"
+    "tlora-pager"
 )
 S3_VARIANTS=(
     "s3"
     "-v3"
+    "-v4"
     "t-deck"
     "wireless-paper"
     "wireless-tracker"

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,12 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.15" date="2025-11-13">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
+    </release>
+    <release version="2.7.14" date="2025-11-03">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.14</url>
+    </release>
     <release version="2.7.13" date="2025-10-11">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.13</url>
     </release>

bin/web.version

@@ -1 +1 @@
-2.6.6
+2.6.7

debian/changelog

@@ -1,3 +1,15 @@
+meshtasticd (2.7.15.0) unstable; urgency=medium
+
+  * Version 2.7.15
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 13 Nov 2025 12:31:57 +0000
+
+meshtasticd (2.7.14.0) unstable; urgency=medium
+
+  * Version 2.7.14
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Mon, 03 Nov 2025 16:11:31 +0000
+
 meshtasticd (2.7.13.0) unstable; urgency=medium
 
   * Version 2.7.13

debian/control

@@ -3,6 +3,7 @@ Section: misc
 Priority: optional
 Maintainer: Austin Lane <vidplace7@gmail.com>
 Build-Depends: debhelper-compat (= 13),
+               libc6-dev (>= 2.38) | libbsd-dev,
                lsb-release,
                tar,
                gzip,

meshtasticd.spec.rpkg

@@ -49,6 +49,13 @@ BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
 
+# libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
+%if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
+BuildRequires: glibc-devel >= 2.38
+%else
+BuildRequires: pkgconfig(libbsd-overlay)
+%endif
+
 Requires:      systemd-udev
 
 %description

platformio.ini

@@ -62,7 +62,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -120,7 +120,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/19b7855e9a1d9deff37391659ca7194e4ef57c43.zip
+	https://github.com/meshtastic/device-ui/archive/28167c67dfd13015a0b5eef1828f95fe8e3ab7c3.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -164,7 +164,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=QMC5883L Compass packageName=mprograms/library/QMC5883LCompass
 	mprograms/QMC5883LCompass@1.2.3
 	# renovate: datasource=custom.pio depName=DFRobot_RTU packageName=dfrobot/library/DFRobot_RTU
-	dfrobot/DFRobot_RTU@1.0.3
+	dfrobot/DFRobot_RTU@1.0.6
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
@@ -176,7 +176,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit LTR390 Library packageName=adafruit/library/Adafruit LTR390 Library
 	adafruit/Adafruit LTR390 Library@1.1.2
 	# renovate: datasource=custom.pio depName=Adafruit PCT2075 packageName=adafruit/library/Adafruit PCT2075
-	adafruit/Adafruit PCT2075@1.0.5
+	adafruit/Adafruit PCT2075@1.0.6
 	# renovate: datasource=custom.pio depName=DFRobot_BMM150 packageName=dfrobot/library/DFRobot_BMM150
 	dfrobot/DFRobot_BMM150@1.0.0
 	# renovate: datasource=custom.pio depName=Adafruit_TSL2561 packageName=adafruit/library/Adafruit TSL2561

src/Power.cpp

@@ -839,8 +839,11 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isChargingNow, batteryVoltageMv, batteryChargePercent);
-    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
-              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+    if (millis() > lastLogTime + 50 * 1000) {
+        LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(),
+                  powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+        lastLogTime = millis();
+    }
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {

src/SerialConsole.cpp

@@ -50,6 +50,7 @@ void consolePrintf(const char *format, ...)
 
 SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), concurrency::OSThread("SerialConsole")
 {
+    api_type = TYPE_SERIAL;
     assert(!console);
     console = this;
     canWrite = false; // We don't send packets to our port until it has talked to us first

src/configuration.h

@@ -126,6 +126,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
 #endif
 
+#ifdef RAK13302
+#define NUM_PA_POINTS 22
+#define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
+#endif
+
 // Default system gain to 0 if not defined
 #ifndef TX_GAIN_LORA
 #define TX_GAIN_LORA 0
@@ -245,6 +250,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
 #define CST328_ADDR 0x1A
+#define CHSC6X_ADDR 0x2E
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)

src/detect/ScanI2C.h

@@ -82,7 +82,10 @@ class ScanI2C
         BHI260AP,
         BMM150,
         TSL2561,
-        DRV2605
+        DRV2605,
+        BH1750,
+        DA217,
+        CHSC6X
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -485,7 +485,26 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(LTR553ALS_ADDR, LTR553ALS, "LTR553ALS", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
+            case LTR553ALS_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
+                if (registerValue == 0x92) {                                                       // LTR553ALS Part ID
+                    type = LTR553ALS;
+                    logFoundDevice("LTR553ALS", (uint8_t)addr.address);
+                } else {
+                    // Test BH1750 - send power on command
+                    i2cBus->beginTransmission(addr.address);
+                    i2cBus->write(0x01); // Power On command
+                    uint8_t bh1750_error = i2cBus->endTransmission();
+                    if (bh1750_error == 0) {
+                        type = BH1750;
+                        logFoundDevice("BH1750", (uint8_t)addr.address);
+                    } else {
+                        LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address);
+                    }
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(BHI260AP_ADDR, BHI260AP, "BHI260AP", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(SCD4X_ADDR, SCD4X, "SCD4X", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(BMM150_ADDR, BMM150, "BMM150", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -1659,8 +1659,12 @@ bool GPS::lookForLocation()
 
 #ifndef TINYGPS_OPTION_NO_STATISTICS
     if (reader.failedChecksum() > lastChecksumFailCount) {
-        LOG_WARN("%u new GPS checksum failures, for a total of %u", reader.failedChecksum() - lastChecksumFailCount,
-                 reader.failedChecksum());
+// In a GPS_DEBUG build we want to log all of these. In production, we only care if there are many of them.
+#ifndef GPS_DEBUG
+        if (reader.failedChecksum() > 4)
+#endif
+            LOG_WARN("%u new GPS checksum failures, for a total of %u", reader.failedChecksum() - lastChecksumFailCount,
+                     reader.failedChecksum());
         lastChecksumFailCount = reader.failedChecksum();
     }
 #endif

src/graphics/Screen.cpp

@@ -443,7 +443,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             if (uiconfig.screen_brightness == 1)
                 digitalWrite(PIN_EINK_EN, HIGH);
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1)
+            if (uiconfig.screen_brightness > 0)
                 io.digitalWrite(PCA_PIN_EINK_EN, HIGH);
 #endif
 

src/graphics/SharedUIDisplay.cpp

@@ -1,6 +1,10 @@
-#include "graphics/SharedUIDisplay.h"
+#include "configuration.h"
+#if HAS_SCREEN
+#include "MeshService.h"
 #include "RTC.h"
+#include "draw/NodeListRenderer.h"
 #include "graphics/ScreenFonts.h"
+#include "graphics/SharedUIDisplay.h"
 #include "graphics/draw/UIRenderer.h"
 #include "main.h"
 #include "meshtastic/config.pb.h"
@@ -396,6 +400,43 @@ const int *getTextPositions(OLEDDisplay *display)
     return textPositions;
 }
 
+// *************************
+// * Common Footer Drawing *
+// *************************
+void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y)
+{
+    bool drawConnectionState = false;
+    if (service->api_state == service->STATE_BLE || service->api_state == service->STATE_WIFI ||
+        service->api_state == service->STATE_SERIAL || service->api_state == service->STATE_PACKET ||
+        service->api_state == service->STATE_HTTP || service->api_state == service->STATE_ETH) {
+        drawConnectionState = true;
+    }
+
+    if (drawConnectionState) {
+        if (isHighResolution) {
+            const int scale = 2;
+            const int bytesPerRow = (connection_icon_width + 7) / 8;
+            int iconX = 0;
+            int iconY = SCREEN_HEIGHT - (connection_icon_height * 2);
+
+            for (int yy = 0; yy < connection_icon_height; ++yy) {
+                const uint8_t *rowPtr = connection_icon + yy * bytesPerRow;
+                for (int xx = 0; xx < connection_icon_width; ++xx) {
+                    const uint8_t byteVal = pgm_read_byte(rowPtr + (xx >> 3));
+                    const uint8_t bitMask = 1U << (xx & 7); // XBM is LSB-first
+                    if (byteVal & bitMask) {
+                        display->fillRect(iconX + xx * scale, iconY + yy * scale, scale, scale);
+                    }
+                }
+            }
+
+        } else {
+            display->drawXbm(0, SCREEN_HEIGHT - connection_icon_height, connection_icon_width, connection_icon_height,
+                             connection_icon);
+        }
+    }
+}
+
 bool isAllowedPunctuation(char c)
 {
     const std::string allowed = ".,!?;:-_()[]{}'\"@#$/\\&+=%~^ ";
@@ -423,3 +464,4 @@ std::string sanitizeString(const std::string &input)
 }
 
 } // namespace graphics
+#endif

src/graphics/SharedUIDisplay.h

@@ -52,6 +52,9 @@ void drawRoundedHighlight(OLEDDisplay *display, int16_t x, int16_t y, int16_t w,
 void drawCommonHeader(OLEDDisplay *display, int16_t x, int16_t y, const char *titleStr = "", bool force_no_invert = false,
                       bool show_date = false);
 
+// Shared battery/time/mail header
+void drawCommonFooter(OLEDDisplay *display, int16_t x, int16_t y);
+
 const int *getTextPositions(OLEDDisplay *display);
 
 bool isAllowedPunctuation(char c);

src/graphics/TFTDisplay.cpp

@@ -422,7 +422,57 @@ static LGFX *tft = nullptr;
 
 #elif defined(ST7789_CS)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
+#ifdef HELTEC_V4_TFT
+#include "chsc6x.h"
+#include "lgfx/v1/Touch.hpp"
+namespace lgfx
+{
+inline namespace v1
+{
+class TOUCH_CHSC6X : public ITouch
+{
+  public:
+    TOUCH_CHSC6X(void)
+    {
+        _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+        _cfg.x_min = 0;
+        _cfg.x_max = 240;
+        _cfg.y_min = 0;
+        _cfg.y_max = 320;
+    };
 
+    bool init(void) override
+    {
+        if (chsc6xTouch == nullptr) {
+            chsc6xTouch = new chsc6x(&Wire1, TOUCH_SDA_PIN, TOUCH_SCL_PIN, TOUCH_INT_PIN, TOUCH_RST_PIN);
+        }
+        chsc6xTouch->chsc6x_init();
+        return true;
+    };
+
+    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override
+    {
+        uint16_t raw_x, raw_y;
+        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y) == 0) {
+            tp[0].x = 320 - 1 - raw_y;
+            tp[0].y = 240 - 1 - raw_x;
+            tp[0].size = 1;
+            tp[0].id = 1;
+            return 1;
+        }
+        tp[0].size = 0;
+        return 0;
+    };
+
+    void wakeup(void) override{};
+    void sleep(void) override{};
+
+  private:
+    chsc6x *chsc6xTouch = nullptr;
+};
+} // namespace v1
+} // namespace lgfx
+#endif
 class LGFX : public lgfx::LGFX_Device
 {
     lgfx::Panel_ST7789 _panel_instance;
@@ -431,6 +481,10 @@ class LGFX : public lgfx::LGFX_Device
 #if HAS_TOUCHSCREEN
 #if defined(T_WATCH_S3) || defined(ELECROW)
     lgfx::Touch_FT5x06 _touch_instance;
+#elif defined(HELTEC_V4_TFT)
+    lgfx::TOUCH_CHSC6X _touch_instance;
+#elif defined(HELTEC_V4_TFT)
+    lgfx::TOUCH_CHSC6X _touch_instance;
 #else
     lgfx::Touch_GT911 _touch_instance;
 #endif
@@ -464,9 +518,9 @@ class LGFX : public lgfx::LGFX_Device
         {                                        // Set the display panel control.
             auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
 
-            cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = -1;       // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = -1;      // Pin number where BUSY is connected (-1 = disable)
+            cfg.pin_cs = ST7789_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7789_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7789_BUSY; // Pin number where BUSY is connected (-1 = disable)
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.

src/graphics/VirtualKeyboard.cpp

@@ -1,5 +1,6 @@
-#include "VirtualKeyboard.h"
 #include "configuration.h"
+#if HAS_SCREEN
+#include "VirtualKeyboard.h"
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
@@ -736,3 +737,4 @@ bool VirtualKeyboard::isTimedOut() const
 }
 
 } // namespace graphics
+#endif

src/graphics/draw/ClockRenderer.cpp

@@ -302,6 +302,8 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - yOffset,
                         secondString);
 #endif
+
+    graphics::drawCommonFooter(display, x, y);
 }
 
 void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y)
@@ -516,6 +518,7 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         display->drawLine(centerX, centerY, secondX, secondY);
 #endif
     }
+    graphics::drawCommonFooter(display, x, y);
 }
 
 } // namespace ClockRenderer

src/graphics/draw/CompassRenderer.cpp

@@ -1,3 +1,5 @@
+#include "configuration.h"
+#if HAS_SCREEN
 #include "CompassRenderer.h"
 #include "NodeDB.h"
 #include "UIRenderer.h"
@@ -135,3 +137,4 @@ uint16_t getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
 
 } // namespace CompassRenderer
 } // namespace graphics
+#endif

src/graphics/draw/DebugRenderer.cpp

@@ -3,6 +3,7 @@
 #include "../Screen.h"
 #include "DebugRenderer.h"
 #include "FSCommon.h"
+#include "MeshService.h"
 #include "NodeDB.h"
 #include "Throttle.h"
 #include "UIRenderer.h"
@@ -223,6 +224,8 @@ void drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, i
 
     display->drawString(x, getTextPositions(display)[line++], "URL: http://meshtastic.local");
 
+    graphics::drawCommonFooter(display, x, y);
+
     /* Display a heartbeat pixel that blinks every time the frame is redrawn */
 #ifdef SHOW_REDRAWS
     if (heartbeat)
@@ -503,6 +506,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[line++],
                         chUtilPercentage);
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -642,10 +646,9 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
     int textWidth = display->getStringWidth(appversionstr);
     int nameX = (SCREEN_WIDTH - textWidth) / 2;
 
-    display->drawString(nameX, getTextPositions(display)[line], appversionstr);
-#if !defined(M5STACK_UNITC6L)
-    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line < 4)) { // Only show uptime if the screen can show it
-        line += 1;
+    display->drawString(nameX, getTextPositions(display)[line++], appversionstr);
+
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show uptime if the screen can show it
         char uptimeStr[32] = "";
         uint32_t uptime = millis() / 1000;
         uint32_t days = uptime / 86400;
@@ -660,9 +663,41 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
             snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
         textWidth = display->getStringWidth(uptimeStr);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
-        display->drawString(nameX, getTextPositions(display)[line], uptimeStr);
+        display->drawString(nameX, getTextPositions(display)[line++], uptimeStr);
     }
-#endif
+
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show API state if the screen can show it
+        char api_state[32] = "";
+        const char *clientWord = nullptr;
+
+        // Determine if narrow or wide screen
+        if (isHighResolution) {
+            clientWord = "Client";
+        } else {
+            clientWord = "App";
+        }
+        snprintf(api_state, sizeof(api_state), "No %ss Connected", clientWord);
+
+        if (service->api_state == service->STATE_BLE) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (BLE)", clientWord);
+        } else if (service->api_state == service->STATE_WIFI) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (WiFi)", clientWord);
+        } else if (service->api_state == service->STATE_SERIAL) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Serial)", clientWord);
+        } else if (service->api_state == service->STATE_PACKET) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Internal)", clientWord);
+        } else if (service->api_state == service->STATE_HTTP) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (HTTP)", clientWord);
+        } else if (service->api_state == service->STATE_ETH) {
+            snprintf(api_state, sizeof(api_state), "%s Connected (Ethernet)", clientWord);
+        }
+        if (api_state[0] != '\0') {
+            display->drawString((SCREEN_WIDTH - display->getStringWidth(api_state)) / 2, getTextPositions(display)[line++],
+                                api_state);
+        }
+    }
+
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************

src/graphics/draw/MenuHandler.cpp

@@ -515,7 +515,7 @@ void menuHandler::homeBaseMenu()
             }
             saveUIConfig();
 #elif defined(PCA_PIN_EINK_EN)
-            if (uiconfig.screen_brightness == 1) {
+            if (uiconfig.screen_brightness > 0) {
                 uiconfig.screen_brightness = 0;
                 io.digitalWrite(PCA_PIN_EINK_EN, LOW);
             } else {
@@ -784,22 +784,30 @@ void menuHandler::nodeNameLengthMenu()
             screen->runNow();
         }
     };
+    bannerOptions.InitialSelected = config.display.use_long_node_name == true ? 1 : 2;
     screen->showOverlayBanner(bannerOptions);
 }
 
 void menuHandler::resetNodeDBMenu()
 {
-    static const char *optionsArray[] = {"Back", "Confirm"};
+    static const char *optionsArray[] = {"Back", "Reset All", "Preserve Favorites"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Confirm Reset NodeDB";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
+    bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == 1 || selected == 2) {
             disableBluetooth();
+            screen->setFrames(Screen::FOCUS_DEFAULT);
+        }
+        if (selected == 1) {
             LOG_INFO("Initiate node-db reset");
             nodeDB->resetNodes();
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+        } else if (selected == 2) {
+            LOG_INFO("Initiate node-db reset but keeping favorites");
+            nodeDB->resetNodes(1);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -935,7 +943,9 @@ void menuHandler::BluetoothToggleMenu()
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1 || selected == 2) {
+        if (selected == 0)
+            return;
+        else if (selected != (config.bluetooth.enabled ? 1 : 2)) {
             InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
         }

src/graphics/draw/MessageRenderer.cpp

@@ -213,6 +213,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #else
         display->drawString(center_text, getTextPositions(display)[2], messageString);
 #endif
+        graphics::drawCommonFooter(display, x, y);
         return;
     }
 
@@ -423,6 +424,7 @@ void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // Draw header at the end to sort out overlapping elements
     graphics::drawCommonHeader(display, x, y, titleStr);
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 std::vector<std::string> generateLines(OLEDDisplay *display, const char *headerStr, const char *messageBuf, int textWidth)

src/graphics/draw/NodeListRenderer.cpp

@@ -53,7 +53,7 @@ static int scrollIndex = 0;
 // Utility Functions
 // =============================
 
-const char *getSafeNodeName(meshtastic_NodeInfoLite *node)
+const char *getSafeNodeName(OLEDDisplay *display, meshtastic_NodeInfoLite *node)
 {
     const char *name = NULL;
     static char nodeName[16] = "?";
@@ -81,6 +81,28 @@ const char *getSafeNodeName(meshtastic_NodeInfoLite *node)
         snprintf(nodeName, sizeof(nodeName), "(%04X)", (uint16_t)(node->num & 0xFFFF));
     }
 
+    if (config.display.use_long_node_name == true) {
+        int availWidth = (SCREEN_WIDTH / 2) - 65;
+        if (availWidth < 0)
+            availWidth = 0;
+
+        size_t origLen = strlen(nodeName);
+        while (nodeName[0] && display->getStringWidth(nodeName) > availWidth) {
+            nodeName[strlen(nodeName) - 1] = '\0';
+        }
+
+        // If we actually truncated, append "..." (ensure space remains in buffer)
+        if (strlen(nodeName) < origLen) {
+            size_t len = strlen(nodeName);
+            size_t maxLen = sizeof(nodeName) - 4; // 3 for "..." and 1 for '\0'
+            if (len > maxLen) {
+                nodeName[maxLen] = '\0';
+                len = maxLen;
+            }
+            strcat(nodeName, "...");
+        }
+    }
+
     return nodeName;
 }
 
@@ -147,7 +169,7 @@ void drawEntryLastHeard(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
     bool isLeftCol = (x < SCREEN_WIDTH / 2);
     int timeOffset = (isHighResolution) ? (isLeftCol ? 7 : 10) : (isLeftCol ? 3 : 7);
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
 
     char timeStr[10];
     uint32_t seconds = sinceLastSeen(node);
@@ -192,7 +214,7 @@ void drawEntryHopSignal(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int
 
     int barsXOffset = columnWidth - barsOffset;
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -236,7 +258,7 @@ void drawNodeDistance(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     bool isLeftCol = (x < SCREEN_WIDTH / 2);
     int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
     char distStr[10] = "";
 
     meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
@@ -331,7 +353,7 @@ void drawEntryCompass(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     // Adjust max text width depending on column and screen width
     int nameMaxWidth = columnWidth - (isHighResolution ? (isLeftCol ? 25 : 28) : (isLeftCol ? 20 : 22));
 
-    const char *nodeName = getSafeNodeName(node);
+    const char *nodeName = getSafeNodeName(display, node);
 
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
@@ -362,11 +384,11 @@ void drawCompassArrow(OLEDDisplay *display, meshtastic_NodeInfoLite *node, int16
     float bearing = GeoCoord::bearing(userLat, userLon, nodeLat, nodeLon);
     float bearingToNode = RAD_TO_DEG * bearing;
     float relativeBearing = fmod((bearingToNode - myHeading + 360), 360);
-    float angle = relativeBearing * DEG_TO_RAD;
     // Shrink size by 2px
     int size = FONT_HEIGHT_SMALL - 5;
     CompassRenderer::drawArrowToNode(display, centerX, centerY, size, relativeBearing);
     /*
+    float angle = relativeBearing * DEG_TO_RAD;
     float halfSize = size / 2.0;
 
     // Point of the arrow
@@ -470,6 +492,7 @@ void drawNodeListScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
 #endif
     const int scrollStartY = y + 3;
     drawScrollbar(display, visibleNodeRows, totalEntries, scrollIndex, 2, scrollStartY);
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // =============================

src/graphics/draw/UIRenderer.cpp

@@ -552,6 +552,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
         // else show nothing
     }
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // ****************************
@@ -563,6 +564,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     display->setTextAlignment(TEXT_ALIGN_LEFT);
     display->setFont(FONT_SMALL);
     int line = 1;
+    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
 
     // === Header ===
 #if defined(M5STACK_UNITC6L)
@@ -740,7 +742,6 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     int yOffset = (isHighResolution) ? 0 : 5;
     std::string longNameStr;
 
-    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
     if (ourNode && ourNode->has_user && strlen(ourNode->user.long_name) > 0) {
         longNameStr = sanitizeString(ourNode->user.long_name);
     }
@@ -771,6 +772,7 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
         display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
     }
 #endif
+    graphics::drawCommonFooter(display, x, y);
 }
 
 // Start Functions to write date/time to the screen
@@ -1000,24 +1002,7 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     const char *displayLine = ""; // Initialize to empty string by default
     meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
 
-    bool usePhoneGPS = (ourNode && nodeDB->hasValidPosition(ourNode) &&
-                        config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED);
-
-    if (usePhoneGPS) {
-        // Phone-provided GPS is active
-        displayLine = "Phone GPS";
-        int yOffset = (isHighResolution) ? 3 : 1;
-        if (isHighResolution) {
-            NodeListRenderer::drawScaledXBitmap16x16(x, getTextPositions(display)[line] + yOffset - 5, imgSatellite_width,
-                                                     imgSatellite_height, imgSatellite, display);
-        } else {
-            display->drawXbm(x + 1, getTextPositions(display)[line] + yOffset, imgSatellite_width, imgSatellite_height,
-                             imgSatellite);
-        }
-        int xOffset = (isHighResolution) ? 6 : 0;
-        display->drawString(x + 11 + xOffset, getTextPositions(display)[line++], displayLine);
-    } else if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
-        // GPS disabled / not present
+    if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
         if (config.position.fixed_position) {
             displayLine = "Fixed GPS";
         } else {
@@ -1108,9 +1093,7 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
 
         // === Final Row: Altitude ===
         char altitudeLine[32] = {0};
-        int32_t alt = (strcmp(displayLine, "Phone GPS") == 0 && ourNode && nodeDB->hasValidPosition(ourNode))
-                          ? ourNode->position.altitude
-                          : geoCoord.getAltitude();
+        int32_t alt = geoCoord.getAltitude();
         if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
             snprintf(altitudeLine, sizeof(altitudeLine), "Alt: %.0fft", alt * METERS_TO_FEET);
         } else {
@@ -1202,6 +1185,7 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     }
 #endif
 #endif // HAS_GPS
+    graphics::drawCommonFooter(display, x, y);
 }
 
 #ifdef USERPREFS_OEM_TEXT
@@ -1286,7 +1270,13 @@ void UIRenderer::drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *sta
     if (totalIcons == 0)
         return;
 
-    const size_t iconsPerPage = (SCREEN_WIDTH + spacing) / (iconSize + spacing);
+    const int navPadding = isHighResolution ? 24 : 12; // padding per side
+
+    int usableWidth = SCREEN_WIDTH - (navPadding * 2);
+    if (usableWidth < iconSize)
+        usableWidth = iconSize;
+
+    const size_t iconsPerPage = usableWidth / (iconSize + spacing);
     const size_t currentPage = currentFrame / iconsPerPage;
     const size_t pageStart = currentPage * iconsPerPage;
     const size_t pageEnd = min(pageStart + iconsPerPage, totalIcons);
@@ -1357,6 +1347,47 @@ void UIRenderer::drawNavigationBar(OLEDDisplay *display, OLEDDisplayUiState *sta
             display->setColor(WHITE);
         }
     }
+
+    // Compact arrow drawer
+    auto drawArrow = [&](bool rightSide) {
+        display->setColor(WHITE);
+
+        const int offset = isHighResolution ? 3 : 1;
+        const int halfH = rectHeight / 2;
+
+        const int top = (y - 2) + (rectHeight - halfH) / 2;
+        const int bottom = top + halfH - 1;
+        const int midY = top + (halfH / 2);
+
+        const int maxW = 4;
+
+        // Determine left X coordinate
+        int baseX = rightSide ? (rectX + rectWidth + offset) : // right arrow
+                        (rectX - offset - 1);                  // left arrow
+
+        for (int yy = top; yy <= bottom; yy++) {
+            int dist = abs(yy - midY);
+            int lineW = maxW - (dist * maxW / (halfH / 2));
+            if (lineW < 1)
+                lineW = 1;
+
+            if (rightSide) {
+                display->drawHorizontalLine(baseX, yy, lineW);
+            } else {
+                display->drawHorizontalLine(baseX - lineW + 1, yy, lineW);
+            }
+        }
+    };
+    // Right arrow
+    if (pageEnd < totalIcons) {
+        drawArrow(true);
+    }
+
+    // Left arrow
+    if (pageStart > 0) {
+        drawArrow(false);
+    }
+
     // Knock the corners off the square
     display->setColor(BLACK);
     display->drawRect(rectX, y - 2, 1, 1);

src/graphics/emotes.cpp

@@ -1,3 +1,5 @@
+#include "configuration.h"
+#if HAS_SCREEN
 #include "emotes.h"
 
 namespace graphics
@@ -275,3 +277,4 @@ const unsigned char bell_icon[] PROGMEM = {
 #endif
 
 } // namespace graphics
+#endif

src/graphics/images.h

@@ -360,6 +360,10 @@ const uint8_t chirpy_hirez[] = {
 #define chirpy_small_image_height 8
 const uint8_t chirpy_small[] = {0x7f, 0x41, 0x55, 0x55, 0x55, 0x55, 0x41, 0x7f};
 
+#define connection_icon_width 7
+#define connection_icon_height 5
+const uint8_t connection_icon[] = {0x36, 0x41, 0x5D, 0x41, 0x36};
+
 #ifdef M5STACK_UNITC6L
 #include "img/icon_small.xbm"
 #else

src/graphics/niche/InkHUD/Applets/Bases/Map/MapApplet.cpp

@@ -13,45 +13,147 @@ void InkHUD::MapApplet::onRender()
         return;
     }
 
+    // Helper: draw rounded rectangle centered at x,y
+    auto fillRoundedRect = [&](int16_t cx, int16_t cy, int16_t w, int16_t h, int16_t r, uint16_t color) {
+        int16_t x = cx - (w / 2);
+        int16_t y = cy - (h / 2);
+
+        // center rects
+        fillRect(x + r, y, w - 2 * r, h, color);
+        fillRect(x, y + r, r, h - 2 * r, color);
+        fillRect(x + w - r, y + r, r, h - 2 * r, color);
+
+        // corners
+        fillCircle(x + r, y + r, r, color);
+        fillCircle(x + w - r - 1, y + r, r, color);
+        fillCircle(x + r, y + h - r - 1, r, color);
+        fillCircle(x + w - r - 1, y + h - r - 1, r, color);
+    };
+
     // Find center of map
-    // - latitude and longitude
-    // - will be placed at X(0.5), Y(0.5)
     getMapCenter(&latCenter, &lngCenter);
-
-    // Calculate North+East distance of each node to map center
-    // - which nodes to use controlled by virtual shouldDrawNode method
     calculateAllMarkers();
-
-    // Set the region shown on the map
-    // - default: fit all nodes, plus padding
-    // - maybe overriden by derived applet
-    // - getMapSize *sets* passed parameters (C-style)
     getMapSize(&widthMeters, &heightMeters);
-
-    // Set the metersToPx conversion value
     calculateMapScale();
 
-    // Special marker for own node
-    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
-    if (ourNode && nodeDB->hasValidPosition(ourNode))
-        drawLabeledMarker(ourNode);
-
-    // Draw all markers
+    // Draw all markers first
     for (Marker m : markers) {
         int16_t x = X(0.5) + (m.eastMeters * metersToPx);
         int16_t y = Y(0.5) - (m.northMeters * metersToPx);
 
-        // Cross Size
-        constexpr uint16_t csMin = 5;
-        constexpr uint16_t csMax = 12;
+        // Add white halo outline first
+        constexpr int outlinePad = 1;
+        int boxSize = 11;
+        int radius = 2; // rounded corner radius
 
-        // Too many hops away
-        if (m.hasHopsAway && m.hopsAway > config.lora.hop_limit) // Too many mops
-            printAt(x, y, "!", CENTER, MIDDLE);
-        else if (!m.hasHopsAway) // Unknown hops
-            drawCross(x, y, csMin);
-        else // The fewer hops, the larger the cross
-            drawCross(x, y, map(m.hopsAway, 0, config.lora.hop_limit, csMax, csMin));
+        // White halo background
+        fillRoundedRect(x, y, boxSize + (outlinePad * 2), boxSize + (outlinePad * 2), radius + 1, WHITE);
+
+        // Draw inner box
+        fillRoundedRect(x, y, boxSize, boxSize, radius, BLACK);
+
+        // Text inside
+        setFont(fontSmall);
+        setTextColor(WHITE);
+
+        // Draw actual marker on top
+        if (m.hasHopsAway && m.hopsAway > config.lora.hop_limit) {
+            printAt(x + 1, y + 1, "X", CENTER, MIDDLE);
+        } else if (!m.hasHopsAway) {
+            printAt(x + 1, y + 1, "?", CENTER, MIDDLE);
+        } else {
+            char hopStr[4];
+            snprintf(hopStr, sizeof(hopStr), "%d", m.hopsAway);
+            printAt(x, y + 1, hopStr, CENTER, MIDDLE);
+        }
+
+        // Restore default font and color
+        setFont(fontSmall);
+        setTextColor(BLACK);
+    }
+
+    // Dual map scale bars
+    int16_t horizPx = width() * 0.25f;
+    int16_t vertPx = height() * 0.25f;
+    float horizMeters = horizPx / metersToPx;
+    float vertMeters = vertPx / metersToPx;
+
+    auto formatDistance = [&](float meters, char *out, size_t len) {
+        if (config.display.units == meshtastic_Config_DisplayConfig_DisplayUnits_IMPERIAL) {
+            float feet = meters * 3.28084f;
+            if (feet < 528)
+                snprintf(out, len, "%.0f ft", feet);
+            else {
+                float miles = feet / 5280.0f;
+                snprintf(out, len, miles < 10 ? "%.1f mi" : "%.0f mi", miles);
+            }
+        } else {
+            if (meters >= 1000)
+                snprintf(out, len, "%.1f km", meters / 1000.0f);
+            else
+                snprintf(out, len, "%.0f m", meters);
+        }
+    };
+
+    // Horizontal scale bar
+    int16_t horizBarY = height() - 2;
+    int16_t horizBarX = 1;
+    drawLine(horizBarX, horizBarY, horizBarX + horizPx, horizBarY, BLACK);
+    drawLine(horizBarX, horizBarY - 3, horizBarX, horizBarY + 3, BLACK);
+    drawLine(horizBarX + horizPx, horizBarY - 3, horizBarX + horizPx, horizBarY + 3, BLACK);
+
+    char horizLabel[32];
+    formatDistance(horizMeters, horizLabel, sizeof(horizLabel));
+    int16_t horizLabelW = getTextWidth(horizLabel);
+    int16_t horizLabelH = getFont().lineHeight();
+    int16_t horizLabelX = horizBarX + horizPx + 4;
+    int16_t horizLabelY = horizBarY - horizLabelH + 1;
+    fillRect(horizLabelX - 2, horizLabelY - 1, horizLabelW + 4, horizLabelH + 2, WHITE);
+    printAt(horizLabelX, horizBarY, horizLabel, LEFT, BOTTOM);
+
+    // Vertical scale bar
+    int16_t vertBarX = 1;
+    int16_t vertBarBottom = horizBarY;
+    int16_t vertBarTop = vertBarBottom - vertPx;
+    drawLine(vertBarX, vertBarBottom, vertBarX, vertBarTop, BLACK);
+    drawLine(vertBarX - 3, vertBarBottom, vertBarX + 3, vertBarBottom, BLACK);
+    drawLine(vertBarX - 3, vertBarTop, vertBarX + 3, vertBarTop, BLACK);
+
+    char vertTopLabel[32];
+    formatDistance(vertMeters, vertTopLabel, sizeof(vertTopLabel));
+    int16_t topLabelY = vertBarTop - getFont().lineHeight() - 2;
+    int16_t topLabelW = getTextWidth(vertTopLabel);
+    int16_t topLabelH = getFont().lineHeight();
+    fillRect(vertBarX - 2, topLabelY - 1, topLabelW + 6, topLabelH + 2, WHITE);
+    printAt(vertBarX + (topLabelW / 2) + 1, topLabelY + (topLabelH / 2), vertTopLabel, CENTER, MIDDLE);
+
+    char vertBottomLabel[32];
+    formatDistance(vertMeters, vertBottomLabel, sizeof(vertBottomLabel));
+    int16_t bottomLabelY = vertBarBottom + 4;
+    int16_t bottomLabelW = getTextWidth(vertBottomLabel);
+    int16_t bottomLabelH = getFont().lineHeight();
+    fillRect(vertBarX - 2, bottomLabelY - 1, bottomLabelW + 6, bottomLabelH + 2, WHITE);
+    printAt(vertBarX + (bottomLabelW / 2) + 1, bottomLabelY + (bottomLabelH / 2), vertBottomLabel, CENTER, MIDDLE);
+
+    // Draw our node LAST with full white fill + outline
+    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+    if (ourNode && nodeDB->hasValidPosition(ourNode)) {
+        Marker self = calculateMarker(ourNode->position.latitude_i * 1e-7, ourNode->position.longitude_i * 1e-7, false, 0);
+
+        int16_t centerX = X(0.5) + (self.eastMeters * metersToPx);
+        int16_t centerY = Y(0.5) - (self.northMeters * metersToPx);
+
+        // White fill background + halo
+        fillCircle(centerX, centerY, 8, WHITE); // big white base
+        drawCircle(centerX, centerY, 8, WHITE); // crisp edge
+
+        // Black bullseye on top
+        drawCircle(centerX, centerY, 6, BLACK);
+        fillCircle(centerX, centerY, 2, BLACK);
+
+        // Crosshairs
+        drawLine(centerX - 8, centerY, centerX + 8, centerY, BLACK);
+        drawLine(centerX, centerY - 8, centerX, centerY + 8, BLACK);
     }
 }
 
@@ -63,110 +165,123 @@ void InkHUD::MapApplet::onRender()
 
 void InkHUD::MapApplet::getMapCenter(float *lat, float *lng)
 {
-    // Find mean lat long coords
-    // ============================
-    // - assigning X, Y and Z values to position on Earth's surface in 3D space, relative to center of planet
-    // - averages the x, y and z coords
-    // - uses tan to find angles for lat / long degrees
-    //   - longitude: triangle formed by x and y (on plane of the equator)
-    //   - latitude: triangle formed by z (north south),
-    //     and the line along plane of equator which stretches from earth's axis to where point xyz intersects planet's surface
+    // If we have a valid position for our own node, use that as the anchor
+    meshtastic_NodeInfoLite *ourNode = nodeDB->getMeshNode(nodeDB->getNodeNum());
+    if (ourNode && nodeDB->hasValidPosition(ourNode)) {
+        *lat = ourNode->position.latitude_i * 1e-7;
+        *lng = ourNode->position.longitude_i * 1e-7;
+    } else {
+        // Find mean lat long coords
+        // ============================
+        // - assigning X, Y and Z values to position on Earth's surface in 3D space, relative to center of planet
+        // - averages the x, y and z coords
+        // - uses tan to find angles for lat / long degrees
+        //   - longitude: triangle formed by x and y (on plane of the equator)
+        //   - latitude: triangle formed by z (north south),
+        //     and the line along plane of equator which stretches from earth's axis to where point xyz intersects planet's
+        //     surface
 
-    // Working totals, averaged after nodeDB processed
-    uint32_t positionCount = 0;
-    float xAvg = 0;
-    float yAvg = 0;
-    float zAvg = 0;
+        // Working totals, averaged after nodeDB processed
+        uint32_t positionCount = 0;
+        float xAvg = 0;
+        float yAvg = 0;
+        float zAvg = 0;
 
-    // For each node in db
-    for (uint32_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
-        meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
+        // For each node in db
+        for (uint32_t i = 0; i < nodeDB->getNumMeshNodes(); i++) {
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNodeByIndex(i);
 
-        // Skip if no position
-        if (!nodeDB->hasValidPosition(node))
-            continue;
+            // Skip if no position
+            if (!nodeDB->hasValidPosition(node))
+                continue;
 
-        // Skip if derived applet doesn't want to show this node on the map
-        if (!shouldDrawNode(node))
-            continue;
+            // Skip if derived applet doesn't want to show this node on the map
+            if (!shouldDrawNode(node))
+                continue;
 
-        // Latitude and Longitude of node, in radians
-        float latRad = node->position.latitude_i * (1e-7) * DEG_TO_RAD;
-        float lngRad = node->position.longitude_i * (1e-7) * DEG_TO_RAD;
+            // Latitude and Longitude of node, in radians
+            float latRad = node->position.latitude_i * (1e-7) * DEG_TO_RAD;
+            float lngRad = node->position.longitude_i * (1e-7) * DEG_TO_RAD;
 
-        // Convert to cartesian points, with center of earth at 0, 0, 0
-        // Exact distance from center is irrelevant, as we're only interested in the vector
-        float x = cos(latRad) * cos(lngRad);
-        float y = cos(latRad) * sin(lngRad);
-        float z = sin(latRad);
+            // Convert to cartesian points, with center of earth at 0, 0, 0
+            // Exact distance from center is irrelevant, as we're only interested in the vector
+            float x = cos(latRad) * cos(lngRad);
+            float y = cos(latRad) * sin(lngRad);
+            float z = sin(latRad);
 
-        // To find mean values shortly
-        xAvg += x;
-        yAvg += y;
-        zAvg += z;
-        positionCount++;
+            // To find mean values shortly
+            xAvg += x;
+            yAvg += y;
+            zAvg += z;
+            positionCount++;
+        }
+
+        // All NodeDB processed, find mean values
+        xAvg /= positionCount;
+        yAvg /= positionCount;
+        zAvg /= positionCount;
+
+        // Longitude from cartesian coords
+        // (Angle from 3D coords describing a point of globe's surface)
+        /*
+                          UK
+                       /-------\
+        (Top View)   /-         -\
+                   /-      (You)  -\
+                 /-           .     -\
+               /-             . X     -\
+         Asia -             ...         - USA
+               \-           Y         -/
+                 \-                 -/
+                   \-             -/
+                     \-         -/
+                       \- -----/
+                       Pacific
+
+        */
+
+        *lng = atan2(yAvg, xAvg) * RAD_TO_DEG;
+
+        // Latitude from cartesian coords
+        // (Angle from 3D coords describing a point on the globe's surface)
+        // As latitude increases, distance from the Earth's north-south axis out to our surface point decreases.
+        // Means we need to first find the hypotenuse which becomes base of our triangle in the second step
+        /*
+                           UK                                         North
+                        /-------\                 (Front View)      /-------\
+         (Top View)   /-         -\                               /-         -\
+                    /-       (You) -\                           /-(You)        -\
+                  /-         /.      -\                       /-   .             -\
+                /-    √X²+Y²/ . X      -\                   /-   Z .               -\
+        Asia   -           /...          - USA             -       .....             -
+                \-           Y         -/                   \-     √X²+Y²          -/
+                  \-                 -/                       \-                 -/
+                    \-             -/                           \-             -/
+                      \-         -/                               \-         -/
+                        \- -----/                                   \- -----/
+                         Pacific                                      South
+        */
+
+        float hypotenuse = sqrt((xAvg * xAvg) + (yAvg * yAvg)); // Distance from globe's north-south axis to surface intersect
+        *lat = atan2(zAvg, hypotenuse) * RAD_TO_DEG;
     }
 
-    // All NodeDB processed, find mean values
-    xAvg /= positionCount;
-    yAvg /= positionCount;
-    zAvg /= positionCount;
-
-    // Longitude from cartesian coords
-    // (Angle from 3D coords describing a point of globe's surface)
-    /*
-                      UK
-                   /-------\
-    (Top View)   /-         -\
-               /-      (You)  -\
-             /-           .     -\
-           /-             . X     -\
-     Asia -             ...         - USA
-           \-           Y         -/
-             \-                 -/
-               \-             -/
-                 \-         -/
-                   \- -----/
-                   Pacific
-
-    */
-
-    *lng = atan2(yAvg, xAvg) * RAD_TO_DEG;
-
-    // Latitude from cartesian coords
-    // (Angle from 3D coords describing a point on the globe's surface)
-    // As latitude increases, distance from the Earth's north-south axis out to our surface point decreases.
-    // Means we need to first find the hypotenuse which becomes base of our triangle in the second step
-    /*
-                       UK                                         North
-                    /-------\                 (Front View)      /-------\
-     (Top View)   /-         -\                               /-         -\
-                /-       (You) -\                           /-(You)        -\
-              /-         /.      -\                       /-   .             -\
-            /-    √X²+Y²/ . X      -\                   /-   Z .               -\
-    Asia   -           /...          - USA             -       .....             -
-            \-           Y         -/                   \-     √X²+Y²          -/
-              \-                 -/                       \-                 -/
-                \-             -/                           \-             -/
-                  \-         -/                               \-         -/
-                    \- -----/                                   \- -----/
-                     Pacific                                      South
-    */
-
-    float hypotenuse = sqrt((xAvg * xAvg) + (yAvg * yAvg)); // Distance from globe's north-south axis to surface intersect
-    *lat = atan2(zAvg, hypotenuse) * RAD_TO_DEG;
+    // Use either our node position, or the mean fallback as the center
+    latCenter = *lat;
+    lngCenter = *lng;
 
     // ----------------------------------------------
-    // This has given us the "mean position"
-    // This will be a position *somewhere* near the center of our nodes.
-    // What we actually want is to place our center so that our outermost nodes end up on the border of our map.
-    // The only real use of our "mean position" is to give us a reference frame:
-    // which direction is east, and which is west.
+    // This has given us either:
+    // - our actual position (preferred), or
+    // - a mean position (fallback if we had no fix)
+    //
+    // What we actually want is to place our center so that our outermost nodes
+    // end up on the border of our map. The only real use of our "center" is to give
+    // us a reference frame: which direction is east, and which is west.
     //------------------------------------------------
 
-    // Find furthest nodes from "mean lat long"
+    // Find furthest nodes from our center
     // ========================================
-
     float northernmost = latCenter;
     float southernmost = latCenter;
     float easternmost = lngCenter;
@@ -184,14 +299,14 @@ void InkHUD::MapApplet::getMapCenter(float *lat, float *lng)
             continue;
 
         // Check for a new top or bottom latitude
-        float lat = node->position.latitude_i * 1e-7;
-        northernmost = max(northernmost, lat);
-        southernmost = min(southernmost, lat);
+        float latNode = node->position.latitude_i * 1e-7;
+        northernmost = max(northernmost, latNode);
+        southernmost = min(southernmost, latNode);
 
         // Longitude is trickier
-        float lng = node->position.longitude_i * 1e-7;
-        float degEastward = fmod(((lng - lngCenter) + 360), 360);      // Degrees traveled east from lngCenter to reach node
-        float degWestward = abs(fmod(((lng - lngCenter) - 360), 360)); // Degrees traveled west from lngCenter to reach node
+        float lngNode = node->position.longitude_i * 1e-7;
+        float degEastward = fmod(((lngNode - lngCenter) + 360), 360);      // Degrees traveled east from lngCenter to reach node
+        float degWestward = abs(fmod(((lngNode - lngCenter) - 360), 360)); // Degrees traveled west from lngCenter to reach node
         if (degEastward < degWestward)
             easternmost = max(easternmost, lngCenter + degEastward);
         else
@@ -250,7 +365,6 @@ InkHUD::MapApplet::Marker InkHUD::MapApplet::calculateMarker(float lat, float ln
     m.hopsAway = hopsAway;
     return m;
 }
-
 // Draw a marker on the map for a node, with a shortname label, and backing box
 void InkHUD::MapApplet::drawLabeledMarker(meshtastic_NodeInfoLite *node)
 {
@@ -324,6 +438,18 @@ void InkHUD::MapApplet::drawLabeledMarker(meshtastic_NodeInfoLite *node)
         textX = labelX + paddingW;
     }
 
+    // Prevent overlap with scale bars and their labels
+    // Define a "safe zone" in the bottom-left where the scale bars and text are drawn
+    constexpr int16_t safeZoneHeight = 28; // adjust based on your label font height
+    constexpr int16_t safeZoneWidth = 60;  // adjust based on horizontal label width zone
+    bool overlapsScale = (labelY + labelH > height() - safeZoneHeight) && (labelX < safeZoneWidth);
+
+    // If it overlaps, shift label upward slightly above the safe zone
+    if (overlapsScale) {
+        labelY = height() - safeZoneHeight - labelH - 2;
+        textY = labelY + (labelH / 2);
+    }
+
     // Backing box
     fillRect(labelX, labelY, labelW, labelH, WHITE);
     drawRect(labelX, labelY, labelW, labelH, BLACK);

src/graphics/niche/InkHUD/Applets/Bases/NodeList/NodeListApplet.cpp

@@ -127,6 +127,11 @@ void InkHUD::NodeListApplet::onRender()
     // Y value (top) of the current card. Increases as we draw.
     uint16_t cardTopY = headerDivY + padDivH;
 
+    // Clean up deleted nodes before drawing
+    cards.erase(
+        std::remove_if(cards.begin(), cards.end(), [](const CardInfo &c) { return nodeDB->getMeshNode(c.nodeNum) == nullptr; }),
+        cards.end());
+
     // -- Each node in list --
     for (auto card = cards.begin(); card != cards.end(); ++card) {
 
@@ -141,6 +146,11 @@ void InkHUD::NodeListApplet::onRender()
 
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeNum);
 
+        // Skip deleted nodes
+        if (!node) {
+            continue;
+        }
+
         // -- Shortname --
         // Parse special chars in the short name
         // Use "?" if unknown
@@ -188,7 +198,7 @@ void InkHUD::NodeListApplet::onRender()
             drawSignalIndicator(signalX, signalY, signalW, signalH, signal);
         }
         // Otherwise, print "hops away" info, if available
-        else if (hopsAway != CardInfo::HOPS_UNKNOWN) {
+        else if (hopsAway != CardInfo::HOPS_UNKNOWN && node) {
             std::string hopString = to_string(node->hops_away);
             hopString += " Hop";
             if (node->hops_away != 1)

src/graphics/niche/InkHUD/Applets/System/Menu/MenuApplet.cpp

@@ -709,7 +709,7 @@ void InkHUD::MenuApplet::drawSystemInfoPanel(int16_t left, int16_t top, uint16_t
     // Voltage
     float voltage = powerStatus->getBatteryVoltageMv() / 1000.0;
     char voltageStr[6]; // "XX.XV"
-    sprintf(voltageStr, "%.1fV", voltage);
+    sprintf(voltageStr, "%.2fV", voltage);
     printAt(colC[0], labelT, "Bat", CENTER, TOP);
     printAt(colC[0], valT, voltageStr, CENTER, TOP);
 

src/input/InputBroker.cpp

@@ -1,11 +1,13 @@
 #include "InputBroker.h"
 #include "PowerFSM.h" // needed for event trigger
+#include "configuration.h"
+#include "modules/ExternalNotificationModule.h"
 
 InputBroker *inputBroker = nullptr;
 
 InputBroker::InputBroker()
 {
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
     inputEventQueue = xQueueCreate(5, sizeof(InputEvent));
     pollSoonQueue = xQueueCreate(5, sizeof(InputPollable *));
     xTaskCreate(pollSoonWorker, "input-pollSoon", 2 * 1024, this, 10, &pollSoonTask);
@@ -17,7 +19,7 @@ void InputBroker::registerSource(Observable<const InputEvent *> *source)
     this->inputEventObserver.observe(source);
 }
 
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
 void InputBroker::requestPollSoon(InputPollable *pollable)
 {
     if (xPortInIsrContext() == pdTRUE) {
@@ -48,11 +50,17 @@ void InputBroker::processInputEventQueue()
 int InputBroker::handleInputEvent(const InputEvent *event)
 {
     powerFSM.trigger(EVENT_INPUT); // todo: not every input should wake, like long hold release
+
+    if (event && event->inputEvent != INPUT_BROKER_NONE && externalNotificationModule &&
+        moduleConfig.external_notification.enabled && externalNotificationModule->nagging()) {
+        externalNotificationModule->stopNow();
+    }
+
     this->notifyObservers(event);
     return 0;
 }
 
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
 void InputBroker::pollSoonWorker(void *p)
 {
     InputBroker *instance = (InputBroker *)p;

src/input/InputBroker.h

@@ -59,7 +59,7 @@ class InputBroker : public Observable<const InputEvent *>
     InputBroker();
     void registerSource(Observable<const InputEvent *> *source);
     void injectInputEvent(const InputEvent *event) { handleInputEvent(event); }
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
     void requestPollSoon(InputPollable *pollable);
     void queueInputEvent(const InputEvent *event);
     void processInputEventQueue();
@@ -69,7 +69,7 @@ class InputBroker : public Observable<const InputEvent *>
     int handleInputEvent(const InputEvent *event);
 
   private:
-#ifdef HAS_FREE_RTOS
+#if defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
     QueueHandle_t inputEventQueue;
     QueueHandle_t pollSoonQueue;
     TaskHandle_t pollSoonTask;

src/input/TDeckProKeyboard.cpp

@@ -57,7 +57,7 @@ static unsigned char TDeckProTapMap[_TCA8418_NUM_KEYS][5] = {
     {0x00, 0x00, 0x00},
     {0x00, 0x00, 0x00},
     {0x20, 0x00, 0x00},
-    {0x00, 0x00, 0x00},
+    {0x00, 0x00, '0'},
     {0x00, 0x00, 0x00} // R_Shift, sym, space, mic, L_Shift
 };
 

src/main.cpp

@@ -436,6 +436,12 @@ void setup()
 
     LOG_INFO("\n\n//\\ E S H T /\\ S T / C\n");
 
+#if defined(DEBUG_MUTE) && defined(DEBUG_PORT)
+    DEBUG_PORT.printf("\r\n\r\n//\\ E S H T /\\ S T / C\r\n");
+    DEBUG_PORT.printf("Version %s for %s from %s\r\n", optstr(APP_VERSION), optstr(APP_ENV), optstr(APP_REPO));
+    DEBUG_PORT.printf("Debug mute is enabled, there will be no serial output.\r\n");
+#endif
+
     initDeepSleep();
 
 #if defined(MODEM_POWER_EN)
@@ -841,7 +847,14 @@ void setup()
         SPI.begin();
     }
 #elif !defined(ARCH_ESP32) // ARCH_RP2040
+#if defined(RAK3401) || defined(RAK13302)
+    pinMode(WB_IO2, OUTPUT);
+    digitalWrite(WB_IO2, HIGH);
+    SPI1.setPins(LORA_MISO, LORA_SCK, LORA_MOSI);
+    SPI1.begin();
+#else
     SPI.begin();
+#endif
 #else
         // ESP32
 #if defined(HW_SPI1_DEVICE)
@@ -1582,7 +1595,7 @@ void loop()
 #endif
 
     service->loop();
-#if !MESHTASTIC_EXCLUDE_INPUTBROKER && defined(HAS_FREE_RTOS)
+#if !MESHTASTIC_EXCLUDE_INPUTBROKER && defined(HAS_FREE_RTOS) && !defined(ARCH_RP2040)
     if (inputBroker)
         inputBroker->processInputEventQueue();
 #endif

src/mesh/CryptoEngine.cpp

@@ -92,10 +92,10 @@ bool CryptoEngine::encryptCurve25519(uint32_t toNode, uint32_t fromNode, meshtas
         LOG_DEBUG("Node %d or their public_key not found", toNode);
         return false;
     }
-    if (!crypto->setDHPublicKey(remotePublic.bytes)) {
+    if (!setDHPublicKey(remotePublic.bytes)) {
         return false;
     }
-    crypto->hash(shared_key, 32);
+    hash(shared_key, 32);
     initNonce(fromNode, packetNum, extraNonceTmp);
 
     // Calculate the shared secret with the destination node and encrypt
@@ -134,10 +134,10 @@ bool CryptoEngine::decryptCurve25519(uint32_t fromNode, meshtastic_UserLite_publ
     }
 
     // Calculate the shared secret with the sending node and decrypt
-    if (!crypto->setDHPublicKey(remotePublic.bytes)) {
+    if (!setDHPublicKey(remotePublic.bytes)) {
         return false;
     }
-    crypto->hash(shared_key, 32);
+    hash(shared_key, 32);
 
     initNonce(fromNode, packetNum, extraNonce);
     printBytes("Attempt decrypt with nonce: ", nonce, 13);

src/mesh/Default.h

@@ -27,7 +27,7 @@
 #ifdef USERPREFS_RINGTONE_NAG_SECS
 #define default_ringtone_nag_secs USERPREFS_RINGTONE_NAG_SECS
 #else
-#define default_ringtone_nag_secs 60
+#define default_ringtone_nag_secs 15
 #endif
 
 #define default_mqtt_address "mqtt.meshtastic.org"
@@ -84,4 +84,4 @@ class Default
             return 1.0 + (nodesOverForty * throttlingFactor); // Each number of online node scales by 0.075 (default)
         }
     }
-};
+};

src/mesh/FloodingRouter.cpp

@@ -31,33 +31,8 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
         wasSeenRecently(p, true, nullptr, nullptr, &wasUpgraded); // Updates history; returns false when an upgrade is detected
 
     // Handle hop_limit upgrade scenario for rebroadcasters
-    // isRebroadcaster() is duplicated in perhapsRebroadcast(), but this avoids confusing log messages
-    if (wasUpgraded && isRebroadcaster() && iface && p->hop_limit > 0) {
-        // wasSeenRecently() reports false in upgrade cases so we handle replacement before the duplicate short-circuit
-        // If we overhear a duplicate copy of the packet with more hops left than the one we are waiting to
-        // rebroadcast, then remove the packet currently sitting in the TX queue and use this one instead.
-        uint8_t dropThreshold = p->hop_limit; // remove queued packets that have fewer hops remaining
-        if (iface->removePendingTXPacket(getFrom(p), p->id, dropThreshold)) {
-            LOG_DEBUG("Processing upgraded packet 0x%08x for rebroadcast with hop limit %d (dropping queued < %d)", p->id,
-                      p->hop_limit, dropThreshold);
-
-            if (nodeDB)
-                nodeDB->updateFrom(*p);
-#if !MESHTASTIC_EXCLUDE_TRACEROUTE
-            if (traceRouteModule && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
-                p->decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP)
-                traceRouteModule->processUpgradedPacket(*p);
-#endif
-
-            perhapsRebroadcast(p);
-
-            // We already enqueued the improved copy, so make sure the incoming packet stops here.
-            return true;
-        }
-
-        // No queue entry was replaced by this upgraded copy, so treat it as a duplicate to avoid
-        // delivering the same packet to applications/phone twice with different hop limits.
-        seenRecently = true;
+    if (wasUpgraded && perhapsHandleUpgradedPacket(p)) {
+        return true; // we handled it, so stop processing
     }
 
     if (seenRecently) {
@@ -70,8 +45,10 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
         if (isRepeated) {
             LOG_DEBUG("Repeated reliable tx");
             // Check if it's still in the Tx queue, if not, we have to relay it again
-            if (!findInTxQueue(p->from, p->id))
+            if (!findInTxQueue(p->from, p->id)) {
+                reprocessPacket(p);
                 perhapsRebroadcast(p);
+            }
         } else {
             perhapsCancelDupe(p);
         }
@@ -82,6 +59,40 @@ bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
     return Router::shouldFilterReceived(p);
 }
 
+bool FloodingRouter::perhapsHandleUpgradedPacket(const meshtastic_MeshPacket *p)
+{
+    // isRebroadcaster() is duplicated in perhapsRebroadcast(), but this avoids confusing log messages
+    if (isRebroadcaster() && iface && p->hop_limit > 0) {
+        // If we overhear a duplicate copy of the packet with more hops left than the one we are waiting to
+        // rebroadcast, then remove the packet currently sitting in the TX queue and use this one instead.
+        uint8_t dropThreshold = p->hop_limit; // remove queued packets that have fewer hops remaining
+        if (iface->removePendingTXPacket(getFrom(p), p->id, dropThreshold)) {
+            LOG_DEBUG("Processing upgraded packet 0x%08x for rebroadcast with hop limit %d (dropping queued < %d)", p->id,
+                      p->hop_limit, dropThreshold);
+
+            reprocessPacket(p);
+            perhapsRebroadcast(p);
+
+            rxDupe++;
+            // We already enqueued the improved copy, so make sure the incoming packet stops here.
+            return true;
+        }
+    }
+
+    return false;
+}
+
+void FloodingRouter::reprocessPacket(const meshtastic_MeshPacket *p)
+{
+    if (nodeDB)
+        nodeDB->updateFrom(*p);
+#if !MESHTASTIC_EXCLUDE_TRACEROUTE
+    if (traceRouteModule && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
+        p->decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP)
+        traceRouteModule->processUpgradedPacket(*p);
+#endif
+}
+
 bool FloodingRouter::roleAllowsCancelingDupe(const meshtastic_MeshPacket *p)
 {
     if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
@@ -121,41 +132,6 @@ bool FloodingRouter::isRebroadcaster()
            config.device.rebroadcast_mode != meshtastic_Config_DeviceConfig_RebroadcastMode_NONE;
 }
 
-void FloodingRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p)
-{
-    if (!isToUs(p) && (p->hop_limit > 0) && !isFromUs(p)) {
-        if (p->id != 0) {
-            if (isRebroadcaster()) {
-                meshtastic_MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
-
-                // Use shared logic to determine if hop_limit should be decremented
-                if (shouldDecrementHopLimit(p)) {
-                    tosend->hop_limit--; // bump down the hop count
-                } else {
-                    LOG_INFO("favorite-ROUTER/CLIENT_BASE-to-ROUTER/CLIENT_BASE flood: preserving hop_limit");
-                }
-#if USERPREFS_EVENT_MODE
-                if (tosend->hop_limit > 2) {
-                    // if we are "correcting" the hop_limit, "correct" the hop_start by the same amount to preserve hops away.
-                    tosend->hop_start -= (tosend->hop_limit - 2);
-                    tosend->hop_limit = 2;
-                }
-#endif
-
-                tosend->next_hop = NO_NEXT_HOP_PREFERENCE; // this should already be the case, but just in case
-
-                LOG_INFO("Rebroadcast received floodmsg");
-                // Note: we are careful to resend using the original senders node id
-                send(tosend);
-            } else {
-                LOG_DEBUG("No rebroadcast: Role = CLIENT_MUTE or Rebroadcast Mode = NONE");
-            }
-        } else {
-            LOG_DEBUG("Ignore 0 id broadcast");
-        }
-    }
-}
-
 void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtastic_Routing *c)
 {
     bool isAckorReply = (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) &&

src/mesh/FloodingRouter.h

@@ -27,10 +27,6 @@
  */
 class FloodingRouter : public Router
 {
-  private:
-    /* Check if we should rebroadcast this packet, and do so if needed */
-    void perhapsRebroadcast(const meshtastic_MeshPacket *p);
-
   public:
     /**
      * Constructor
@@ -59,6 +55,17 @@ class FloodingRouter : public Router
      */
     virtual void sniffReceived(const meshtastic_MeshPacket *p, const meshtastic_Routing *c) override;
 
+    /* Check if we should rebroadcast this packet, and do so if needed */
+    virtual bool perhapsRebroadcast(const meshtastic_MeshPacket *p) = 0;
+
+    /* Check if we should handle an upgraded packet (with higher hop_limit)
+     * @return true if we handled it (so stop processing)
+     */
+    bool perhapsHandleUpgradedPacket(const meshtastic_MeshPacket *p);
+
+    /* Call when we receive a packet that needs some reprocessing, but afterwards should be filtered */
+    void reprocessPacket(const meshtastic_MeshPacket *p);
+
     // Return false for roles like ROUTER which should always rebroadcast even when we've heard another rebroadcast of
     // the same packet
     bool roleAllowsCancelingDupe(const meshtastic_MeshPacket *p);

src/mesh/MeshService.h

@@ -79,6 +79,18 @@ class MeshService
     uint32_t oldFromNum = 0;
 
   public:
+    enum APIState {
+        STATE_DISCONNECTED, // Initial state, no API is connected
+        STATE_BLE,
+        STATE_WIFI,
+        STATE_SERIAL,
+        STATE_PACKET,
+        STATE_HTTP,
+        STATE_ETH
+    };
+
+    APIState api_state = STATE_DISCONNECTED;
+
     static bool isTextPayload(const meshtastic_MeshPacket *p)
     {
         if (moduleConfig.range_test.enabled && p->decoded.portnum == meshtastic_PortNum_RANGE_TEST_APP) {

src/mesh/NextHopRouter.cpp

@@ -43,31 +43,8 @@ bool NextHopRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
                                         &wasUpgraded); // Updates history; returns false when an upgrade is detected
 
     // Handle hop_limit upgrade scenario for rebroadcasters
-    // isRebroadcaster() is duplicated in perhapsRelay(), but this avoids confusing log messages
-    if (wasUpgraded && isRebroadcaster() && iface && p->hop_limit > 0) {
-        // Upgrade detection bypasses the duplicate short-circuit so we replace the queued packet before exiting
-        uint8_t dropThreshold = p->hop_limit; // remove queued packets that have fewer hops remaining
-        if (iface->removePendingTXPacket(getFrom(p), p->id, dropThreshold)) {
-            LOG_DEBUG("Processing upgraded packet 0x%08x for relay with hop limit %d (dropping queued < %d)", p->id, p->hop_limit,
-                      dropThreshold);
-
-            if (nodeDB)
-                nodeDB->updateFrom(*p);
-#if !MESHTASTIC_EXCLUDE_TRACEROUTE
-            if (traceRouteModule && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag &&
-                p->decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP)
-                traceRouteModule->processUpgradedPacket(*p);
-#endif
-
-            perhapsRelay(p);
-
-            // We already enqueued the improved copy, so make sure the incoming packet stops here.
-            return true;
-        }
-
-        // No queue entry was replaced by this upgraded copy, so treat it as a duplicate to avoid
-        // delivering the same packet to applications/phone twice with different hop limits.
-        seenRecently = true;
+    if (wasUpgraded && perhapsHandleUpgradedPacket(p)) {
+        return true; // we handled it, so stop processing
     }
 
     if (seenRecently) {
@@ -82,14 +59,20 @@ bool NextHopRouter::shouldFilterReceived(const meshtastic_MeshPacket *p)
         if (wasFallback) {
             LOG_INFO("Fallback to flooding from relay_node=0x%x", p->relay_node);
             // Check if it's still in the Tx queue, if not, we have to relay it again
-            if (!findInTxQueue(p->from, p->id))
-                perhapsRelay(p);
+            if (!findInTxQueue(p->from, p->id)) {
+                reprocessPacket(p);
+                perhapsRebroadcast(p);
+            }
         } else {
             bool isRepeated = p->hop_start > 0 && p->hop_start == p->hop_limit;
             // If repeated and not in Tx queue anymore, try relaying again, or if we are the destination, send the ACK again
             if (isRepeated) {
-                if (!findInTxQueue(p->from, p->id) && !perhapsRelay(p) && isToUs(p) && p->want_ack)
-                    sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel, 0);
+                if (!findInTxQueue(p->from, p->id)) {
+                    reprocessPacket(p);
+                    if (!perhapsRebroadcast(p) && isToUs(p) && p->want_ack) {
+                        sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel, 0);
+                    }
+                }
             } else if (!weWereNextHop) {
                 perhapsCancelDupe(p); // If it's a dupe, cancel relay if we were not explicitly asked to relay
             }
@@ -107,13 +90,14 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
     bool isAckorReply = (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) &&
                         (p->decoded.request_id != 0 || p->decoded.reply_id != 0);
     if (isAckorReply) {
-        // Update next-hop for the original transmitter of this successful transmission to the relay node, but ONLY if "from" is
-        // not 0 (means implicit ACK) and original packet was also relayed by this node, or we sent it directly to the destination
+        // Update next-hop for the original transmitter of this successful transmission to the relay node, but ONLY if "from"
+        // is not 0 (means implicit ACK) and original packet was also relayed by this node, or we sent it directly to the
+        // destination
         if (p->from != 0) {
             meshtastic_NodeInfoLite *origTx = nodeDB->getMeshNode(p->from);
             if (origTx) {
-                // Either relayer of ACK was also a relayer of the packet, or we were the *only* relayer and the ACK came directly
-                // from the destination
+                // Either relayer of ACK was also a relayer of the packet, or we were the *only* relayer and the ACK came
+                // directly from the destination
                 bool wasAlreadyRelayer = wasRelayer(p->relay_node, p->decoded.request_id, p->to);
                 bool weWereSoleRelayer = false;
                 bool weWereRelayer = wasRelayer(ourRelayID, p->decoded.request_id, p->to, &weWereSoleRelayer);
@@ -134,34 +118,49 @@ void NextHopRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtast
         }
     }
 
-    perhapsRelay(p);
+    perhapsRebroadcast(p);
 
     // handle the packet as normal
     Router::sniffReceived(p, c);
 }
 
-/* Check if we should be relaying this packet if so, do so. */
-bool NextHopRouter::perhapsRelay(const meshtastic_MeshPacket *p)
+/* Check if we should be rebroadcasting this packet if so, do so. */
+bool NextHopRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p)
 {
     if (!isToUs(p) && !isFromUs(p) && p->hop_limit > 0) {
-        if (p->next_hop == NO_NEXT_HOP_PREFERENCE || p->next_hop == nodeDB->getLastByteOfNodeNum(getNodeNum())) {
+        if (p->id != 0) {
             if (isRebroadcaster()) {
-                meshtastic_MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
-                LOG_INFO("Relaying received message coming from %x", p->relay_node);
+                if (p->next_hop == NO_NEXT_HOP_PREFERENCE || p->next_hop == nodeDB->getLastByteOfNodeNum(getNodeNum())) {
+                    meshtastic_MeshPacket *tosend = packetPool.allocCopy(*p); // keep a copy because we will be sending it
+                    LOG_INFO("Rebroadcast received message coming from %x", p->relay_node);
 
-                // Use shared logic to determine if hop_limit should be decremented
-                if (shouldDecrementHopLimit(p)) {
-                    tosend->hop_limit--; // bump down the hop count
-                } else {
-                    LOG_INFO("Router/CLIENT_BASE-to-favorite-router/CLIENT_BASE relay: preserving hop_limit");
+                    // Use shared logic to determine if hop_limit should be decremented
+                    if (shouldDecrementHopLimit(p)) {
+                        tosend->hop_limit--; // bump down the hop count
+                    } else {
+                        LOG_INFO("favorite-ROUTER/CLIENT_BASE-to-ROUTER/CLIENT_BASE rebroadcast: preserving hop_limit");
+                    }
+#if USERPREFS_EVENT_MODE
+                    if (tosend->hop_limit > 2) {
+                        // if we are "correcting" the hop_limit, "correct" the hop_start by the same amount to preserve hops away.
+                        tosend->hop_start -= (tosend->hop_limit - 2);
+                        tosend->hop_limit = 2;
+                    }
+#endif
+
+                    if (p->next_hop == NO_NEXT_HOP_PREFERENCE) {
+                        FloodingRouter::send(tosend);
+                    } else {
+                        NextHopRouter::send(tosend);
+                    }
+
+                    return true;
                 }
-
-                NextHopRouter::send(tosend);
-
-                return true;
             } else {
-                LOG_DEBUG("Not rebroadcasting: Role = CLIENT_MUTE or Rebroadcast Mode = NONE");
+                LOG_DEBUG("No rebroadcast: Role = CLIENT_MUTE or Rebroadcast Mode = NONE");
             }
+        } else {
+            LOG_DEBUG("Ignore 0 id broadcast");
         }
     }
 
@@ -231,13 +230,13 @@ bool NextHopRouter::stopRetransmission(GlobalPacketId key)
             }
         }
 
-        // Regardless of whether or not we canceled this packet from the txQueue, remove it from our pending list so it doesn't
-        // get scheduled again. (This is the core of stopRetransmission.)
+        // Regardless of whether or not we canceled this packet from the txQueue, remove it from our pending list so it
+        // doesn't get scheduled again. (This is the core of stopRetransmission.)
         auto numErased = pending.erase(key);
         assert(numErased == 1);
 
-        // When we remove an entry from pending, always be sure to release the copy of the packet that was allocated in the call
-        // to startRetransmission.
+        // When we remove an entry from pending, always be sure to release the copy of the packet that was allocated in the
+        // call to startRetransmission.
         packetPool.release(p);
 
         return true;

src/mesh/NextHopRouter.h

@@ -148,7 +148,7 @@ class NextHopRouter : public FloodingRouter
      */
     uint8_t getNextHop(NodeNum to, uint8_t relay_node);
 
-    /** Check if we should be relaying this packet if so, do so.
-     *  @return true if we did relay */
-    bool perhapsRelay(const meshtastic_MeshPacket *p);
+    /** Check if we should be rebroadcasting this packet if so, do so.
+     *  @return true if we did rebroadcast */
+    bool perhapsRebroadcast(const meshtastic_MeshPacket *p) override;
 };

src/mesh/NodeDB.cpp

@@ -653,7 +653,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     strncpy(config.network.ntp_server, "meshtastic.pool.ntp.org", 32);
 
 #if (defined(T_DECK) || defined(T_WATCH_S3) || defined(UNPHONE) || defined(PICOMPUTER_S3) || defined(SENSECAP_INDICATOR) ||      \
-     defined(ELECROW_PANEL)) &&                                                                                                  \
+     defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT)) &&                                                                        \
     HAS_TFT
     // switch BT off by default; use TFT programming mode or hotkey to enable
     config.bluetooth.enabled = false;
@@ -978,12 +978,25 @@ void NodeDB::installDefaultChannels()
     channelFile.version = DEVICESTATE_CUR_VER;
 }
 
-void NodeDB::resetNodes()
+void NodeDB::resetNodes(bool keepFavorites)
 {
     if (!config.position.fixed_position)
         clearLocalPosition();
     numMeshNodes = 1;
-    std::fill(nodeDatabase.nodes.begin() + 1, nodeDatabase.nodes.end(), meshtastic_NodeInfoLite());
+    if (keepFavorites) {
+        LOG_INFO("Clearing node database - preserving favorites");
+        for (size_t i = 0; i < meshNodes->size(); i++) {
+            meshtastic_NodeInfoLite &node = meshNodes->at(i);
+            if (i > 0 && !node.is_favorite) {
+                node = meshtastic_NodeInfoLite();
+            } else {
+                numMeshNodes += 1;
+            }
+        };
+    } else {
+        LOG_INFO("Clearing node database - removing favorites");
+        std::fill(nodeDatabase.nodes.begin() + 1, nodeDatabase.nodes.end(), meshtastic_NodeInfoLite());
+    }
     devicestate.has_rx_text_message = false;
     devicestate.has_rx_waypoint = false;
     saveNodeDatabaseToDisk();
@@ -1632,13 +1645,32 @@ void NodeDB::addFromContact(meshtastic_SharedContact contact)
         // If should_ignore is set,
         // we need to clear the public key and other cruft, in addition to setting the node as ignored
         info->is_ignored = true;
+        info->is_favorite = false;
         info->has_device_metrics = false;
         info->has_position = false;
         info->user.public_key.size = 0;
         info->user.public_key.bytes[0] = 0;
     } else {
-        info->last_heard = getValidTime(RTCQualityNTP);
-        info->is_favorite = true;
+        /* Clients are sending add_contact before every text message DM (because clients may hold a larger node database with
+         * public keys than the radio holds). However, we don't want to update last_heard just because we sent someone a DM!
+         */
+
+        /* "Boring old nodes" are the first to be evicted out of the node database when full. This includes a newly-zeroed
+         * nodeinfo because it has: !is_favorite && last_heard==0. To keep this from happening when we addFromContact, we set the
+         * new node as a favorite, and we leave last_heard alone (even if it's zero).
+         */
+        if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE) {
+            // Special case for CLIENT_BASE: is_favorite has special meaning, and we don't want to automatically set it
+            // without the user doing so deliberately. We don't normally expect users to use a CLIENT_BASE to send DMs or to add
+            // contacts, but we should make sure it doesn't auto-favorite in case they do. Instead, as a workaround, we'll set
+            // last_heard to now, so that the add_contact node doesn't immediately get evicted.
+            info->last_heard = getTime();
+        } else {
+            // Normal case: set is_favorite to prevent expiration.
+            // last_heard will remain as-is (or remain 0 if this entry wasn't in the nodeDB).
+            info->is_favorite = true;
+        }
+
         // As the clients will begin sending the contact with DMs, we want to strictly check if the node is manually verified
         if (contact.manually_verified) {
             info->bitfield |= NODEINFO_BITFIELD_IS_KEY_MANUALLY_VERIFIED_MASK;

src/mesh/NodeDB.h

@@ -229,7 +229,8 @@ class NodeDB
      */
     size_t getNumOnlineMeshNodes(bool localOnly = false);
 
-    void initConfigIntervals(), initModuleConfigIntervals(), resetNodes(), removeNodeByNum(NodeNum nodeNum);
+    void initConfigIntervals(), initModuleConfigIntervals(), resetNodes(bool keepFavorites = false),
+        removeNodeByNum(NodeNum nodeNum);
 
     bool factoryReset(bool eraseBleBonds = false);
 

src/mesh/PacketCache.h

@@ -17,7 +17,7 @@ typedef struct PacketCacheEntry {
             uint8_t encrypted : 1;    // Payload is encrypted
             uint8_t has_metadata : 1; // Payload includes PacketCacheMetadata
             uint8_t : 6;              // Reserved for future use
-            uint16_t : 8;             // Reserved for future use
+            uint8_t : 8;              // Reserved for future use
         };
     };
 } PacketCacheEntry;

src/mesh/PacketHistory.cpp

@@ -94,7 +94,6 @@ bool PacketHistory::wasSeenRecently(const meshtastic_MeshPacket *p, bool withUpd
         LOG_DEBUG("Packet History - Hop limit upgrade: packet 0x%08x from hop_limit=%d to hop_limit=%d", p->id, found->hop_limit,
                   p->hop_limit);
         *wasUpgraded = true;
-        seenRecently = false; // Allow router processing but prevent duplicate app delivery
     } else if (wasUpgraded) {
         *wasUpgraded = false; // Initialize to false if not an upgrade
     }

src/mesh/PhoneAPI.cpp

@@ -57,6 +57,9 @@ void PhoneAPI::handleStartConfig()
 #endif
     }
 
+    // Allow subclasses to prepare for high-throughput config traffic
+    onConfigStart();
+
     // even if we were already connected - restart our state machine
     if (config_nonce == SPECIAL_NONCE_ONLY_NODES) {
         // If client only wants node info, jump directly to sending nodes
@@ -71,7 +74,7 @@ void PhoneAPI::handleStartConfig()
     spiLock->unlock();
     LOG_DEBUG("Got %d files in manifest", filesManifest.size());
 
-    LOG_INFO("Start API client config");
+    LOG_INFO("Start API client config millis=%u", millis());
     // Protect against concurrent BLE callbacks: they run in NimBLE's FreeRTOS task and also touch nodeInfoQueue.
     {
         concurrency::LockGuard guard(&nodeInfoMutex);
@@ -84,6 +87,18 @@ void PhoneAPI::handleStartConfig()
 void PhoneAPI::close()
 {
     LOG_DEBUG("PhoneAPI::close()");
+    if (service->api_state == service->STATE_BLE && api_type == TYPE_BLE)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_WIFI && api_type == TYPE_WIFI)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_SERIAL && api_type == TYPE_SERIAL)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_PACKET && api_type == TYPE_PACKET)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_HTTP && api_type == TYPE_HTTP)
+        service->api_state = service->STATE_DISCONNECTED;
+    else if (service->api_state == service->STATE_ETH && api_type == TYPE_ETH)
+        service->api_state = service->STATE_DISCONNECTED;
 
     if (state != STATE_SEND_NOTHING) {
         state = STATE_SEND_NOTHING;
@@ -453,7 +468,10 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
         break;
 
     case STATE_SEND_OTHER_NODEINFOS: {
-        LOG_DEBUG("Send known nodes");
+        if (readIndex == 2) { //  readIndex==2 will be true for the first non-us node
+            LOG_INFO("Start sending nodeinfos millis=%u", millis());
+        }
+
         meshtastic_NodeInfo infoToSend = {};
         {
             concurrency::LockGuard guard(&nodeInfoMutex);
@@ -470,13 +488,22 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
         if (infoToSend.num != 0) {
             // Just in case we stored a different user.id in the past, but should never happen going forward
             sprintf(infoToSend.user.id, "!%08x", infoToSend.num);
-            LOG_DEBUG("nodeinfo: num=0x%x, lastseen=%u, id=%s, name=%s", infoToSend.num, infoToSend.last_heard,
-                      infoToSend.user.id, infoToSend.user.long_name);
+
+            // Logging this really slows down sending nodes on initial connection because the serial console is so slow, so only
+            // uncomment if you really need to:
+            // LOG_INFO("nodeinfo: num=0x%x, lastseen=%u, id=%s, name=%s", nodeInfoForPhone.num, nodeInfoForPhone.last_heard,
+            // nodeInfoForPhone.user.id, nodeInfoForPhone.user.long_name);
+
+            // Occasional progress logging. (readIndex==2 will be true for the first non-us node)
+            if (readIndex == 2 || readIndex % 20 == 0) {
+                LOG_DEBUG("nodeinfo: %d/%d", readIndex, nodeDB->getNumMeshNodes());
+            }
+
             fromRadioScratch.which_payload_variant = meshtastic_FromRadio_node_info_tag;
             fromRadioScratch.node_info = infoToSend;
             prefetchNodeInfos();
         } else {
-            LOG_DEBUG("Done sending nodeinfo");
+            LOG_DEBUG("Done sending %d of %d nodeinfos millis=%u", readIndex, nodeDB->getNumMeshNodes(), millis());
             concurrency::LockGuard guard(&nodeInfoMutex);
             nodeInfoQueue.clear();
             state = STATE_SEND_FILEMANIFEST;
@@ -558,11 +585,28 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf)
 
 void PhoneAPI::sendConfigComplete()
 {
-    LOG_INFO("Config Send Complete");
+    LOG_INFO("Config Send Complete millis=%u", millis());
     fromRadioScratch.which_payload_variant = meshtastic_FromRadio_config_complete_id_tag;
     fromRadioScratch.config_complete_id = config_nonce;
     config_nonce = 0;
     state = STATE_SEND_PACKETS;
+    if (api_type == TYPE_BLE) {
+        service->api_state = service->STATE_BLE;
+    } else if (api_type == TYPE_WIFI) {
+        service->api_state = service->STATE_WIFI;
+    } else if (api_type == TYPE_SERIAL) {
+        service->api_state = service->STATE_SERIAL;
+    } else if (api_type == TYPE_PACKET) {
+        service->api_state = service->STATE_PACKET;
+    } else if (api_type == TYPE_HTTP) {
+        service->api_state = service->STATE_HTTP;
+    } else if (api_type == TYPE_ETH) {
+        service->api_state = service->STATE_ETH;
+    }
+
+    // Allow subclasses to know we've entered steady-state so they can lower power consumption
+    onConfigComplete();
+
     pauseBluetoothLogging = false;
 }
 

src/mesh/PhoneAPI.h

@@ -136,6 +136,7 @@ class PhoneAPI
     bool available();
 
     bool isConnected() { return state != STATE_SEND_NOTHING; }
+    bool isSendingPackets() { return state == STATE_SEND_PACKETS; }
 
   protected:
     /// Our fromradio packet while it is being assembled
@@ -158,9 +159,26 @@ class PhoneAPI
      */
     virtual void onNowHasData(uint32_t fromRadioNum) {}
 
+    /// Subclasses can use these lifecycle hooks for transport-specific behavior around config/steady-state
+    /// (i.e. BLE connection params)
+    virtual void onConfigStart() {}
+    virtual void onConfigComplete() {}
+
     /// begin a new connection
     void handleStartConfig();
 
+    enum APIType {
+        TYPE_NONE, // Initial state, don't send anything until the client starts asking for config
+        TYPE_BLE,
+        TYPE_WIFI,
+        TYPE_SERIAL,
+        TYPE_PACKET,
+        TYPE_HTTP,
+        TYPE_ETH
+    };
+
+    APIType api_type = TYPE_NONE;
+
   private:
     void releasePhonePacket();
 

src/mesh/RF95Interface.cpp

@@ -260,6 +260,7 @@ void RF95Interface::addReceiveMetadata(meshtastic_MeshPacket *mp)
 {
     mp->rx_snr = lora->getSNR();
     mp->rx_rssi = lround(lora->getRSSI());
+    LOG_DEBUG("Corrected frequency offset: %f", lora->getFrequencyError());
 }
 
 void RF95Interface::setStandby()

src/mesh/RadioInterface.cpp

@@ -272,10 +272,10 @@ uint32_t RadioInterface::getTxDelayMsec()
 uint8_t RadioInterface::getCWsize(float snr)
 {
     // The minimum value for a LoRa SNR
-    const uint32_t SNR_MIN = -20;
+    const int32_t SNR_MIN = -20;
 
     // The maximum value for a LoRa SNR
-    const uint32_t SNR_MAX = 10;
+    const int32_t SNR_MAX = 10;
 
     return map(snr, SNR_MIN, SNR_MAX, CWmin, CWmax);
 }

src/mesh/RadioLibInterface.cpp

@@ -289,12 +289,7 @@ void RadioLibInterface::onNotify(uint32_t notification)
                         // actual transmission as short as possible
                         txp = txQueue.dequeue();
                         assert(txp);
-                        bool sent = startSend(txp);
-                        if (sent) {
-                            // Packet has been sent, count it toward our TX airtime utilization.
-                            uint32_t xmitMsec = getPacketTime(txp);
-                            airTime->logAirtime(TX_LOG, xmitMsec);
-                        }
+                        startSend(txp);
                         LOG_DEBUG("%d packets remain in the TX queue", txQueue.getMaxLen() - txQueue.getFree());
                     }
                 }
@@ -413,6 +408,10 @@ void RadioLibInterface::completeSending()
     sendingPacket = NULL;
 
     if (p) {
+        // Packet has been sent, count it toward our TX airtime utilization.
+        uint32_t xmitMsec = getPacketTime(p);
+        airTime->logAirtime(TX_LOG, xmitMsec);
+
         txGood++;
         if (!isFromUs(p))
             txRelay++;

src/mesh/Router.cpp

@@ -35,6 +35,15 @@
     (MAX_RX_TOPHONE + MAX_RX_FROMRADIO + 2 * MAX_TX_QUEUE +                                                                      \
      2) // max number of packets which can be in flight (either queued from reception or queued for sending)
 
+static MemoryDynamic<meshtastic_MeshPacket> dynamicPool;
+Allocator<meshtastic_MeshPacket> &packetPool = dynamicPool;
+#elif defined(ARCH_STM32WL)
+// On STM32 there isn't enough heap left over for the rest of the firmware if we allocate this statically.
+// For now, make it dynamic again.
+#define MAX_PACKETS                                                                                                              \
+    (MAX_RX_TOPHONE + MAX_RX_FROMRADIO + 2 * MAX_TX_QUEUE +                                                                      \
+     2) // max number of packets which can be in flight (either queued from reception or queued for sending)
+
 static MemoryDynamic<meshtastic_MeshPacket> dynamicPool;
 Allocator<meshtastic_MeshPacket> &packetPool = dynamicPool;
 #else
@@ -470,6 +479,11 @@ DecodeState perhapsDecode(meshtastic_MeshPacket *p)
                     LOG_ERROR("Invalid protobufs in received mesh packet id=0x%08x (bad psk?)!", p->id);
                 } else if (decodedtmp.portnum == meshtastic_PortNum_UNKNOWN_APP) {
                     LOG_ERROR("Invalid portnum (bad psk?)!");
+#if !(MESHTASTIC_EXCLUDE_PKI)
+                } else if (!owner.is_licensed && isToUs(p) && decodedtmp.portnum == meshtastic_PortNum_TEXT_MESSAGE_APP) {
+                    LOG_WARN("Rejecting legacy DM");
+                    return DecodeState::DECODE_FAILURE;
+#endif
                 } else {
                     p->decoded = decodedtmp;
                     p->which_payload_variant = meshtastic_MeshPacket_decoded_tag; // change type to decoded

src/mesh/api/PacketAPI.cpp

@@ -19,6 +19,7 @@ PacketAPI *PacketAPI::create(PacketServer *_server)
 PacketAPI::PacketAPI(PacketServer *_server)
     : concurrency::OSThread("PacketAPI"), isConnected(false), programmingMode(false), server(_server)
 {
+    api_type = TYPE_PACKET;
 }
 
 int32_t PacketAPI::runOnce()

src/mesh/api/WiFiServerAPI.cpp

@@ -25,6 +25,7 @@ void deInitApiServer()
 
 WiFiServerAPI::WiFiServerAPI(WiFiClient &_client) : ServerAPI(_client)
 {
+    api_type = TYPE_WIFI;
     LOG_INFO("Incoming wifi connection");
 }
 

src/mesh/api/ethServerAPI.cpp

@@ -20,6 +20,7 @@ void initApiServer(int port)
 ethServerAPI::ethServerAPI(EthernetClient &_client) : ServerAPI(_client)
 {
     LOG_INFO("Incoming ethernet connection");
+    api_type = TYPE_ETH;
 }
 
 ethServerPort::ethServerPort(int port) : APIServerPort(port) {}

src/mesh/generated/meshtastic/admin.pb.h

@@ -272,8 +272,9 @@ typedef struct _meshtastic_AdminMessage {
         int32_t shutdown_seconds;
         /* Tell the node to factory reset config; all device state and configuration will be returned to factory defaults; BLE bonds will be preserved. */
         int32_t factory_reset_config;
-        /* Tell the node to reset the nodedb. */
-        int32_t nodedb_reset;
+        /* Tell the node to reset the nodedb.
+     When true, favorites are preserved through reset. */
+        bool nodedb_reset;
     };
     /* The node generates this key and sends it with any get_x_response packets.
  The client MUST include the same key with any set_x commands. Key expires after 300 seconds.
@@ -459,7 +460,7 @@ X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,exit_simulator,exit_simulato
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,reboot_seconds,reboot_seconds),  97) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,shutdown_seconds,shutdown_seconds),  98) \
 X(a, STATIC,   ONEOF,    INT32,    (payload_variant,factory_reset_config,factory_reset_config),  99) \
-X(a, STATIC,   ONEOF,    INT32,    (payload_variant,nodedb_reset,nodedb_reset), 100) \
+X(a, STATIC,   ONEOF,    BOOL,     (payload_variant,nodedb_reset,nodedb_reset), 100) \
 X(a, STATIC,   SINGULAR, BYTES,    session_passkey, 101)
 #define meshtastic_AdminMessage_CALLBACK NULL
 #define meshtastic_AdminMessage_DEFAULT NULL

src/mesh/generated/meshtastic/mesh.pb.h

@@ -282,6 +282,12 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_HELTEC_WIRELESS_TRACKER_V2 = 113,
     /* LilyGo T-Watch Ultra */
     meshtastic_HardwareModel_T_WATCH_ULTRA = 114,
+    /* Elecrow ThinkNode M3 */
+    meshtastic_HardwareModel_THINKNODE_M3 = 115,
+    /* RAK WISMESH_TAP_V2 with ESP32-S3 CPU */
+    meshtastic_HardwareModel_WISMESH_TAP_V2 = 116,
+    /* RAK3401 */
+    meshtastic_HardwareModel_RAK3401 = 117,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */

src/mesh/generated/meshtastic/telemetry.pb.h

@@ -101,7 +101,9 @@ typedef enum _meshtastic_TelemetrySensorType {
     /* SEN5X PM SENSORS */
     meshtastic_TelemetrySensorType_SEN5X = 43,
     /* TSL2561 light sensor */
-    meshtastic_TelemetrySensorType_TSL2561 = 44
+    meshtastic_TelemetrySensorType_TSL2561 = 44,
+    /* BH1750 light sensor */
+    meshtastic_TelemetrySensorType_BH1750 = 45
 } meshtastic_TelemetrySensorType;
 
 /* Struct definitions */
@@ -438,8 +440,8 @@ extern "C" {
 
 /* Helper constants for enums */
 #define _meshtastic_TelemetrySensorType_MIN meshtastic_TelemetrySensorType_SENSOR_UNSET
-#define _meshtastic_TelemetrySensorType_MAX meshtastic_TelemetrySensorType_TSL2561
-#define _meshtastic_TelemetrySensorType_ARRAYSIZE ((meshtastic_TelemetrySensorType)(meshtastic_TelemetrySensorType_TSL2561+1))
+#define _meshtastic_TelemetrySensorType_MAX meshtastic_TelemetrySensorType_BH1750
+#define _meshtastic_TelemetrySensorType_ARRAYSIZE ((meshtastic_TelemetrySensorType)(meshtastic_TelemetrySensorType_BH1750+1))
 
 
 

src/mesh/http/ContentHandler.cpp

@@ -148,6 +148,8 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer)
 
 void handleAPIv1FromRadio(HTTPRequest *req, HTTPResponse *res)
 {
+    if (webServerThread)
+        webServerThread->markActivity();
 
     LOG_DEBUG("webAPI handleAPIv1FromRadio");
 
@@ -391,6 +393,9 @@ void handleFsDeleteStatic(HTTPRequest *req, HTTPResponse *res)
 
 void handleStatic(HTTPRequest *req, HTTPResponse *res)
 {
+    if (webServerThread)
+        webServerThread->markActivity();
+
     // Get access to the parameters
     ResourceParameters *params = req->getParams();
 

src/mesh/http/ContentHandler.h

@@ -26,7 +26,7 @@ class HttpAPI : public PhoneAPI
 {
 
   public:
-    // Nothing here yet
+    HttpAPI() { api_type = TYPE_HTTP; }
 
   private:
     // Nothing here yet

src/mesh/http/WebServer.cpp

@@ -49,6 +49,12 @@ Preferences prefs;
 using namespace httpsserver;
 #include "mesh/http/ContentHandler.h"
 
+static const uint32_t ACTIVE_THRESHOLD_MS = 5000;
+static const uint32_t MEDIUM_THRESHOLD_MS = 30000;
+static const int32_t ACTIVE_INTERVAL_MS = 50;
+static const int32_t MEDIUM_INTERVAL_MS = 200;
+static const int32_t IDLE_INTERVAL_MS = 1000;
+
 static SSLCert *cert;
 static HTTPSServer *secureServer;
 static HTTPServer *insecureServer;
@@ -175,6 +181,32 @@ WebServerThread::WebServerThread() : concurrency::OSThread("WebServer")
     if (!config.network.wifi_enabled && !config.network.eth_enabled) {
         disable();
     }
+    lastActivityTime = millis();
+}
+
+void WebServerThread::markActivity()
+{
+    lastActivityTime = millis();
+}
+
+int32_t WebServerThread::getAdaptiveInterval()
+{
+    uint32_t currentTime = millis();
+    uint32_t timeSinceActivity;
+
+    if (currentTime >= lastActivityTime) {
+        timeSinceActivity = currentTime - lastActivityTime;
+    } else {
+        timeSinceActivity = (UINT32_MAX - lastActivityTime) + currentTime + 1;
+    }
+
+    if (timeSinceActivity < ACTIVE_THRESHOLD_MS) {
+        return ACTIVE_INTERVAL_MS;
+    } else if (timeSinceActivity < MEDIUM_THRESHOLD_MS) {
+        return MEDIUM_INTERVAL_MS;
+    } else {
+        return IDLE_INTERVAL_MS;
+    }
 }
 
 int32_t WebServerThread::runOnce()
@@ -189,8 +221,7 @@ int32_t WebServerThread::runOnce()
         ESP.restart();
     }
 
-    // Loop every 5ms.
-    return (5);
+    return getAdaptiveInterval();
 }
 
 void initWebServer()

src/mesh/http/WebServer.h

@@ -10,13 +10,17 @@ void createSSLCert();
 
 class WebServerThread : private concurrency::OSThread
 {
+  private:
+    uint32_t lastActivityTime = 0;
 
   public:
     WebServerThread();
     uint32_t requestRestart = 0;
+    void markActivity();
 
   protected:
     virtual int32_t runOnce() override;
+    int32_t getAdaptiveInterval();
 };
 
 extern WebServerThread *webServerThread;

src/mesh/raspihttp/PiWebServer.h

@@ -27,7 +27,7 @@ class HttpAPI : public PhoneAPI
 {
 
   public:
-    // Nothing here yet
+    HttpAPI() { api_type = TYPE_HTTP; }
 
   private:
     // Nothing here yet

src/modules/AdminModule.cpp

@@ -104,9 +104,18 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
             (config.security.admin_key[2].size == 32 &&
              memcmp(mp.public_key.bytes, config.security.admin_key[2].bytes, 32) == 0)) {
             LOG_INFO("PKC admin payload with authorized sender key");
+
+            // Automatically favorite the node that is using the admin key
             auto remoteNode = nodeDB->getMeshNode(mp.from);
             if (remoteNode && !remoteNode->is_favorite) {
-                remoteNode->is_favorite = true;
+                if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE) {
+                    // Special case for CLIENT_BASE: is_favorite has special meaning, and we don't want to automatically set it
+                    // without the user doing so deliberately.
+                    LOG_INFO("PKC admin valid, but not auto-favoriting node %x because role==CLIENT_BASE", mp.from);
+                } else {
+                    LOG_INFO("PKC admin valid. Auto-favoriting node %x", mp.from);
+                    remoteNode->is_favorite = true;
+                }
             }
         } else {
             myReply = allocErrorResponse(meshtastic_Routing_Error_ADMIN_PUBLIC_KEY_UNAUTHORIZED, &mp);
@@ -280,7 +289,12 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
     case meshtastic_AdminMessage_nodedb_reset_tag: {
         disableBluetooth();
         LOG_INFO("Initiate node-db reset");
-        nodeDB->resetNodes();
+        //  CLIENT_BASE, ROUTER and ROUTER_LATE are able to preserve the remaining hop count when relaying a packet via a
+        //  favorited node, so ensure that their favorites are kept on reset
+        bool rolePreference =
+            isOneOf(config.device.role, meshtastic_Config_DeviceConfig_Role_CLIENT_BASE,
+                    meshtastic_Config_DeviceConfig_Role_ROUTER, meshtastic_Config_DeviceConfig_Role_ROUTER_LATE);
+        nodeDB->resetNodes(rolePreference ? rolePreference : r->nodedb_reset);
         reboot(DEFAULT_REBOOT_SECONDS);
         break;
     }

src/modules/CannedMessageModule.cpp

@@ -973,8 +973,14 @@ void CannedMessageModule::sendText(NodeNum dest, ChannelIndex channel, const cha
     LOG_INFO("Send message id=%u, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
 
     if (p->to != 0xffffffff) {
-        LOG_INFO("Proactively adding %x as favorite node", p->to);
-        nodeDB->set_favorite(true, p->to);
+        // Only add as favorite if our role is NOT CLIENT_BASE
+        if (config.device.role != 12) {
+            LOG_INFO("Proactively adding %x as favorite node", p->to);
+            nodeDB->set_favorite(true, p->to);
+        } else {
+            LOG_DEBUG("Not favoriting node %x as we are CLIENT_BASE role", p->to);
+        }
+
         screen->setFrames(graphics::Screen::FOCUS_PRESERVE);
         p->pki_encrypted = true;
         p->channel = 0;

src/modules/ExternalNotificationModule.cpp

@@ -95,22 +95,9 @@ int32_t ExternalNotificationModule::runOnce()
         isRtttlPlaying = isRtttlPlaying || audioThread->isPlaying();
 #endif
         if ((nagCycleCutoff < millis()) && !isRtttlPlaying) {
-            // let the song finish if we reach timeout
+            // Turn off external notification immediately when timeout is reached, regardless of song state
             nagCycleCutoff = UINT32_MAX;
-            LOG_INFO("Turning off external notification: ");
-            for (int i = 0; i < 3; i++) {
-                setExternalState(i, false);
-                externalTurnedOn[i] = 0;
-                LOG_INFO("%d ", i);
-            }
-            LOG_INFO("");
-#ifdef HAS_I2S
-            // GPIO0 is used as mclk for I2S audio and set to OUTPUT by the sound library
-            // T-Deck uses GPIO0 as trackball button, so restore the mode
-#if defined(T_DECK) || (defined(BUTTON_PIN) && BUTTON_PIN == 0)
-            pinMode(0, INPUT);
-#endif
-#endif
+            ExternalNotificationModule::stopNow();
             isNagging = false;
             return INT32_MAX; // save cycles till we're needed again
         }
@@ -318,21 +305,36 @@ bool ExternalNotificationModule::nagging()
 
 void ExternalNotificationModule::stopNow()
 {
+    LOG_INFO("Turning off external notification: ");
+    LOG_INFO("Stop RTTTL playback");
     rtttl::stop();
 #ifdef HAS_I2S
+    LOG_INFO("Stop audioThread playback");
     if (audioThread->isPlaying())
         audioThread->stop();
 #endif
-    nagCycleCutoff = 1; // small value
-    isNagging = false;
     // Turn off all outputs
+    LOG_INFO("Turning off setExternalStates: ");
     for (int i = 0; i < 3; i++) {
         setExternalState(i, false);
         externalTurnedOn[i] = 0;
+        LOG_INFO("%d ", i);
     }
     setIntervalFromNow(0);
 #ifdef T_WATCH_S3
     drv.stop();
+#endif
+
+    // Prevent the state machine from immediately re-triggering outputs after a manual stop.
+    isNagging = false;
+    nagCycleCutoff = UINT32_MAX;
+
+#ifdef HAS_I2S
+    // GPIO0 is used as mclk for I2S audio and set to OUTPUT by the sound library
+    // T-Deck uses GPIO0 as trackball button, so restore the mode
+#if defined(T_DECK) || (defined(BUTTON_PIN) && BUTTON_PIN == 0)
+    pinMode(0, INPUT);
+#endif
 #endif
 }
 

src/modules/RangeTestModule.cpp

@@ -159,6 +159,7 @@ ProcessMessage RangeTestModuleRadio::handleReceived(const meshtastic_MeshPacket
             LOG_DEBUG("---- Received Packet:");
             LOG_DEBUG("mp.from          %d", mp.from);
             LOG_DEBUG("mp.rx_snr        %f", mp.rx_snr);
+            LOG_DEBUG("mp.rx_rssi       %f", mp.rx_rssi);
             LOG_DEBUG("mp.hop_limit     %d", mp.hop_limit);
             LOG_DEBUG("---- Node Information of Received Packet (mp.from):");
             LOG_DEBUG("n->user.long_name         %s", n->user.long_name);
@@ -234,8 +235,8 @@ bool RangeTestModuleRadio::appendFile(const meshtastic_MeshPacket &mp)
         }
 
         // Print the CSV header
-        if (fileToWrite.println(
-                "time,from,sender name,sender lat,sender long,rx lat,rx long,rx elevation,rx snr,distance,hop limit,payload")) {
+        if (fileToWrite.println("time,from,sender name,sender lat,sender long,rx lat,rx long,rx elevation,rx "
+                                "snr,distance,hop limit,payload,rx rssi")) {
             LOG_INFO("File was written");
         } else {
             LOG_ERROR("File write failed");
@@ -297,6 +298,8 @@ bool RangeTestModuleRadio::appendFile(const meshtastic_MeshPacket &mp)
 
     // TODO: If quotes are found in the payload, it has to be escaped.
     fileToAppend.printf("\"%s\"\n", p.payload.bytes);
+    fileToAppend.printf("%i,", mp.rx_rssi); // RX RSSI
+
     fileToAppend.flush();
     fileToAppend.close();
 

src/modules/SerialModule.cpp

@@ -65,13 +65,22 @@ SerialModuleRadio *serialModuleRadio;
 
 #if defined(TTGO_T_ECHO) || defined(CANARYONE) || defined(MESHLINK) || defined(ELECROW_ThinkNode_M1) ||                          \
     defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE)
-SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial") {}
+SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial")
+{
+    api_type = TYPE_SERIAL;
+}
 static Print *serialPrint = &Serial;
 #elif defined(CONFIG_IDF_TARGET_ESP32C6) || defined(RAK3172) || defined(EBYTE_E77_MBL)
-SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("Serial") {}
+SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("Serial")
+{
+    api_type = TYPE_SERIAL;
+}
 static Print *serialPrint = &Serial1;
 #else
-SerialModule::SerialModule() : StreamAPI(&Serial2), concurrency::OSThread("Serial") {}
+SerialModule::SerialModule() : StreamAPI(&Serial2), concurrency::OSThread("Serial")
+{
+    api_type = TYPE_SERIAL;
+}
 static Print *serialPrint = &Serial2;
 #endif
 

src/modules/StoreForwardModule.cpp

@@ -204,6 +204,10 @@ void StoreForwardModule::historyAdd(const meshtastic_MeshPacket &mp)
     this->packetHistory[this->packetHistoryTotalCount].payload_size = p.payload.size;
     this->packetHistory[this->packetHistoryTotalCount].rx_rssi = mp.rx_rssi;
     this->packetHistory[this->packetHistoryTotalCount].rx_snr = mp.rx_snr;
+    this->packetHistory[this->packetHistoryTotalCount].hop_start = mp.hop_start;
+    this->packetHistory[this->packetHistoryTotalCount].hop_limit = mp.hop_limit;
+    this->packetHistory[this->packetHistoryTotalCount].via_mqtt = mp.via_mqtt;
+    this->packetHistory[this->packetHistoryTotalCount].transport_mechanism = mp.transport_mechanism;
     memcpy(this->packetHistory[this->packetHistoryTotalCount].payload, p.payload.bytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 
     this->packetHistoryTotalCount++;
@@ -256,6 +260,10 @@ meshtastic_MeshPacket *StoreForwardModule::preparePayload(NodeNum dest, uint32_t
                 p->decoded.emoji = (uint32_t)this->packetHistory[i].emoji;
                 p->rx_rssi = this->packetHistory[i].rx_rssi;
                 p->rx_snr = this->packetHistory[i].rx_snr;
+                p->hop_start = this->packetHistory[i].hop_start;
+                p->hop_limit = this->packetHistory[i].hop_limit;
+                p->via_mqtt = this->packetHistory[i].via_mqtt;
+                p->transport_mechanism = (meshtastic_MeshPacket_TransportMechanism)this->packetHistory[i].transport_mechanism;
 
                 // Let's assume that if the server received the S&F request that the client is in range.
                 //   TODO: Make this configurable.

src/modules/StoreForwardModule.h

@@ -21,6 +21,10 @@ struct PacketHistoryStruct {
     pb_size_t payload_size;
     int32_t rx_rssi;
     float rx_snr;
+    uint8_t hop_start;
+    uint8_t hop_limit;
+    bool via_mqtt;
+    uint8_t transport_mechanism;
 };
 
 class StoreForwardModule : private concurrency::OSThread, public ProtobufModule<meshtastic_StoreAndForward>

src/modules/SystemCommandsModule.cpp

@@ -85,10 +85,8 @@ int SystemCommandsModule::handleInputEvent(const InputEvent *event)
     switch (event->inputEvent) {
         // GPS
     case INPUT_BROKER_GPS_TOGGLE:
-        LOG_WARN("GPS Toggle");
 #if !MESHTASTIC_EXCLUDE_GPS
         if (gps) {
-            LOG_WARN("GPS Toggle2");
             if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED &&
                 config.position.fixed_position == false) {
                 nodeDB->clearLocalPosition();

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -361,6 +361,7 @@ bool EnvironmentTelemetryModule::wantUIFrame()
     return moduleConfig.telemetry.environment_screen_enabled;
 }
 
+#if HAS_SCREEN
 void EnvironmentTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     // === Setup display ===
@@ -509,7 +510,9 @@ void EnvironmentTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiSt
 
         currentY += rowHeight;
     }
+    graphics::drawCommonFooter(display, x, y);
 }
+#endif
 
 bool EnvironmentTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_Telemetry *t)
 {

src/modules/Telemetry/PowerTelemetry.cpp

@@ -108,6 +108,7 @@ bool PowerTelemetryModule::wantUIFrame()
     return moduleConfig.telemetry.power_screen_enabled;
 }
 
+#if HAS_SCREEN
 void PowerTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     display->clear();
@@ -164,7 +165,9 @@ void PowerTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *s
     if (m.has_ch3_voltage || m.has_ch3_current) {
         drawLine("Ch3", m.ch3_voltage, m.ch3_current);
     }
+    graphics::drawCommonFooter(display, x, y);
 }
+#endif
 
 bool PowerTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_Telemetry *t)
 {

src/modules/TraceRouteModule.cpp

@@ -11,6 +11,113 @@ extern graphics::Screen *screen;
 
 TraceRouteModule *traceRouteModule;
 
+void TraceRouteModule::setResultText(const String &text)
+{
+    resultText = text;
+    resultLines.clear();
+    resultLinesDirty = true;
+}
+
+void TraceRouteModule::clearResultLines()
+{
+    resultLines.clear();
+    resultLinesDirty = false;
+}
+#if HAS_SCREEN
+void TraceRouteModule::rebuildResultLines(OLEDDisplay *display)
+{
+    if (!display) {
+        resultLinesDirty = false;
+        return;
+    }
+
+    resultLines.clear();
+
+    if (resultText.length() == 0) {
+        resultLinesDirty = false;
+        return;
+    }
+
+    int maxWidth = display->getWidth() - 4;
+    if (maxWidth <= 0) {
+        resultLinesDirty = false;
+        return;
+    }
+
+    int start = 0;
+    int textLength = resultText.length();
+
+    while (start <= textLength) {
+        int newlinePos = resultText.indexOf('\n', start);
+        String segment;
+
+        if (newlinePos != -1) {
+            segment = resultText.substring(start, newlinePos);
+            start = newlinePos + 1;
+        } else {
+            segment = resultText.substring(start);
+            start = textLength + 1;
+        }
+
+        if (segment.length() == 0) {
+            resultLines.push_back("");
+            continue;
+        }
+
+        if (display->getStringWidth(segment) <= maxWidth) {
+            resultLines.push_back(segment);
+            continue;
+        }
+
+        String remaining = segment;
+
+        while (remaining.length() > 0) {
+            String tempLine = "";
+            int lastGoodBreak = -1;
+            bool lineComplete = false;
+
+            for (int i = 0; i < static_cast<int>(remaining.length()); i++) {
+                char ch = remaining.charAt(i);
+                String testLine = tempLine + ch;
+
+                if (display->getStringWidth(testLine) > maxWidth) {
+                    if (lastGoodBreak >= 0) {
+                        resultLines.push_back(remaining.substring(0, lastGoodBreak + 1));
+                        remaining = remaining.substring(lastGoodBreak + 1);
+                        lineComplete = true;
+                        break;
+                    } else if (tempLine.length() > 0) {
+                        resultLines.push_back(tempLine);
+                        remaining = remaining.substring(i);
+                        lineComplete = true;
+                        break;
+                    } else {
+                        resultLines.push_back(String(ch));
+                        remaining = remaining.substring(i + 1);
+                        lineComplete = true;
+                        break;
+                    }
+                } else {
+                    tempLine = testLine;
+                    if (ch == ' ' || ch == '>' || ch == '<' || ch == '-' || ch == '(' || ch == ')' || ch == ',') {
+                        lastGoodBreak = i;
+                    }
+                }
+            }
+
+            if (!lineComplete) {
+                if (tempLine.length() > 0) {
+                    resultLines.push_back(tempLine);
+                }
+                break;
+            }
+        }
+    }
+
+    resultLinesDirty = false;
+}
+#endif
+
 bool TraceRouteModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_RouteDiscovery *r)
 {
     // We only alter the packet in alterReceivedProtobuf()
@@ -21,6 +128,11 @@ void TraceRouteModule::alterReceivedProtobuf(meshtastic_MeshPacket &p, meshtasti
 {
     const meshtastic_Data &incoming = p.decoded;
 
+    // Update next-hops using returned route
+    if (incoming.request_id) {
+        updateNextHops(p, r);
+    }
+
     // Insert unknown hops if necessary
     insertUnknownHops(p, r, !incoming.request_id);
 
@@ -153,6 +265,65 @@ void TraceRouteModule::alterReceivedProtobuf(meshtastic_MeshPacket &p, meshtasti
     }
 }
 
+void TraceRouteModule::updateNextHops(meshtastic_MeshPacket &p, meshtastic_RouteDiscovery *r)
+{
+    // E.g. if the route is A->B->C->D and we are B, we can set C as next-hop for C and D
+    // Similarly, if we are C, we can set D as next-hop for D
+    // If we are A, we can set B as next-hop for B, C and D
+
+    // First check if we were the original sender or in the original route
+    int8_t nextHopIndex = -1;
+    if (isToUs(&p)) {
+        nextHopIndex = 0; // We are the original sender, next hop is first in route
+    } else {
+        // Check if we are in the original route
+        for (uint8_t i = 0; i < r->route_count; i++) {
+            if (r->route[i] == nodeDB->getNodeNum()) {
+                nextHopIndex = i + 1; // Next hop is the one after us
+                break;
+            }
+        }
+    }
+
+    // If we are in the original route, update the next hops
+    if (nextHopIndex != -1) {
+        // For every node after us, we can set the next-hop to the first node after us
+        NodeNum nextHop;
+        if (nextHopIndex == r->route_count) {
+            nextHop = p.from; // We are the last in the route, next hop is destination
+        } else {
+            nextHop = r->route[nextHopIndex];
+        }
+
+        if (nextHop == NODENUM_BROADCAST) {
+            return;
+        }
+        uint8_t nextHopByte = nodeDB->getLastByteOfNodeNum(nextHop);
+
+        // For the rest of the nodes in the route, set their next-hop
+        // Note: if we are the last in the route, this loop will not run
+        for (int8_t i = nextHopIndex; i < r->route_count; i++) {
+            NodeNum targetNode = r->route[i];
+            maybeSetNextHop(targetNode, nextHopByte);
+        }
+
+        // Also set next-hop for the destination node
+        maybeSetNextHop(p.from, nextHopByte);
+    }
+}
+
+void TraceRouteModule::maybeSetNextHop(NodeNum target, uint8_t nextHopByte)
+{
+    if (target == NODENUM_BROADCAST)
+        return;
+
+    meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(target);
+    if (node && node->next_hop != nextHopByte) {
+        LOG_INFO("Updating next-hop for 0x%08x to 0x%02x based on traceroute", target, nextHopByte);
+        node->next_hop = nextHopByte;
+    }
+}
+
 void TraceRouteModule::processUpgradedPacket(const meshtastic_MeshPacket &mp)
 {
     if (mp.which_payload_variant != meshtastic_MeshPacket_decoded_tag || mp.decoded.portnum != meshtastic_PortNum_TRACEROUTE_APP)
@@ -342,7 +513,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     if (node == 0 || node == NODENUM_BROADCAST) {
         LOG_ERROR("Invalid node number for trace route: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Invalid node";
+        setResultText("Invalid node");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -356,7 +527,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     if (node == nodeDB->getNodeNum()) {
         LOG_ERROR("Cannot trace route to self: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Cannot trace self";
+        setResultText("Cannot trace self");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -383,6 +554,8 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
         unsigned long wait = (cooldownMs - (now - lastTraceRouteTime)) / 1000;
         bannerText = String("Wait for ") + String(wait) + String("s");
         runState = TRACEROUTE_STATE_COOLDOWN;
+        resultText = "";
+        clearResultLines();
 
         requestFocus();
         UIFrameEvent e;
@@ -395,6 +568,8 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     tracingNode = node;
     lastTraceRouteTime = now;
     runState = TRACEROUTE_STATE_TRACKING;
+    resultText = "";
+    clearResultLines();
     bannerText = String("Tracing ") + getNodeName(node);
 
     LOG_INFO("TraceRoute UI: Starting trace route to node 0x%08x, requesting focus", node);
@@ -437,7 +612,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
         } else {
             LOG_ERROR("MeshService is NULL!");
             runState = TRACEROUTE_STATE_RESULT;
-            resultText = "Service unavailable";
+            setResultText("Service unavailable");
             resultShowTime = millis();
             tracingNode = 0;
 
@@ -450,7 +625,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     } else {
         LOG_ERROR("Failed to allocate TraceRoute packet from router");
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Failed to send";
+        setResultText("Failed to send");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -468,7 +643,7 @@ void TraceRouteModule::launch(NodeNum node)
     if (node == 0 || node == NODENUM_BROADCAST) {
         LOG_ERROR("Invalid node number for trace route: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Invalid node";
+        setResultText("Invalid node");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -482,7 +657,7 @@ void TraceRouteModule::launch(NodeNum node)
     if (node == nodeDB->getNodeNum()) {
         LOG_ERROR("Cannot trace route to self: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Cannot trace self";
+        setResultText("Cannot trace self");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -504,6 +679,8 @@ void TraceRouteModule::launch(NodeNum node)
         unsigned long wait = (cooldownMs - (now - lastTraceRouteTime)) / 1000;
         bannerText = String("Wait for ") + String(wait) + String("s");
         runState = TRACEROUTE_STATE_COOLDOWN;
+        resultText = "";
+        clearResultLines();
 
         requestFocus();
         UIFrameEvent e;
@@ -516,6 +693,8 @@ void TraceRouteModule::launch(NodeNum node)
     runState = TRACEROUTE_STATE_TRACKING;
     tracingNode = node;
     lastTraceRouteTime = now;
+    resultText = "";
+    clearResultLines();
     bannerText = String("Tracing ") + getNodeName(node);
 
     requestFocus();
@@ -550,14 +729,14 @@ void TraceRouteModule::launch(NodeNum node)
         } else {
             LOG_ERROR("MeshService is NULL!");
             runState = TRACEROUTE_STATE_RESULT;
-            resultText = "Service unavailable";
+            setResultText("Service unavailable");
             resultShowTime = millis();
             tracingNode = 0;
         }
     } else {
         LOG_ERROR("Failed to allocate TraceRoute packet from router");
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Failed to send";
+        setResultText("Failed to send");
         resultShowTime = millis();
         tracingNode = 0;
     }
@@ -565,7 +744,7 @@ void TraceRouteModule::launch(NodeNum node)
 
 void TraceRouteModule::handleTraceRouteResult(const String &result)
 {
-    resultText = result;
+    setResultText(result);
     runState = TRACEROUTE_STATE_RESULT;
     resultShowTime = millis();
     tracingNode = 0;
@@ -615,83 +794,15 @@ void TraceRouteModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state
         display->setFont(FONT_SMALL);
 
         if (resultText.length() > 0) {
-            std::vector<String> lines;
-            String currentLine = "";
-            int maxWidth = display->getWidth() - 4;
-
-            int start = 0;
-            int newlinePos = resultText.indexOf('\n', start);
-
-            while (newlinePos != -1 || start < static_cast<int>(resultText.length())) {
-                String segment;
-                if (newlinePos != -1) {
-                    segment = resultText.substring(start, newlinePos);
-                    start = newlinePos + 1;
-                    newlinePos = resultText.indexOf('\n', start);
-                } else {
-                    segment = resultText.substring(start);
-                    start = resultText.length();
-                }
-
-                if (display->getStringWidth(segment) <= maxWidth) {
-                    lines.push_back(segment);
-                } else {
-                    // Try to break at better positions (space, >, <, -)
-                    String remaining = segment;
-
-                    while (remaining.length() > 0) {
-                        String tempLine = "";
-                        int lastGoodBreak = -1;
-                        bool lineComplete = false;
-
-                        for (int i = 0; i < static_cast<int>(remaining.length()); i++) {
-                            char ch = remaining.charAt(i);
-                            String testLine = tempLine + ch;
-
-                            if (display->getStringWidth(testLine) > maxWidth) {
-                                if (lastGoodBreak >= 0) {
-                                    // Break at the last good position
-                                    lines.push_back(remaining.substring(0, lastGoodBreak + 1));
-                                    remaining = remaining.substring(lastGoodBreak + 1);
-                                    lineComplete = true;
-                                    break;
-                                } else if (tempLine.length() > 0) {
-                                    lines.push_back(tempLine);
-                                    remaining = remaining.substring(i);
-                                    lineComplete = true;
-                                    break;
-                                } else {
-                                    // Single character exceeds width
-                                    lines.push_back(String(ch));
-                                    remaining = remaining.substring(i + 1);
-                                    lineComplete = true;
-                                    break;
-                                }
-                            } else {
-                                tempLine = testLine;
-                                // Mark good break positions
-                                if (ch == ' ' || ch == '>' || ch == '<' || ch == '-' || ch == '(' || ch == ')') {
-                                    lastGoodBreak = i;
-                                }
-                            }
-                        }
-
-                        if (!lineComplete) {
-                            // Reached end of remaining text
-                            if (tempLine.length() > 0) {
-                                lines.push_back(tempLine);
-                            }
-                            break;
-                        }
-                    }
-                }
+            if (resultLinesDirty) {
+                rebuildResultLines(display);
             }
 
             int lineHeight = FONT_HEIGHT_SMALL + 1; // Use proper font height with 1px spacing
-            for (size_t i = 0; i < lines.size(); i++) {
+            for (size_t i = 0; i < resultLines.size(); i++) {
                 int lineY = contentStartY + (i * lineHeight);
                 if (lineY + FONT_HEIGHT_SMALL <= display->getHeight()) {
-                    display->drawString(x + 2, lineY, lines[i]);
+                    display->drawString(x + 2, lineY, resultLines[i]);
                 }
             }
         }
@@ -715,7 +826,7 @@ int32_t TraceRouteModule::runOnce()
     if (runState == TRACEROUTE_STATE_TRACKING && now - lastTraceRouteTime > trackingTimeoutMs) {
         LOG_INFO("TraceRoute timeout, no response received");
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "No response received";
+        setResultText("No response received");
         resultShowTime = now;
         tracingNode = 0;
 
@@ -751,6 +862,8 @@ int32_t TraceRouteModule::runOnce()
             // Cooldown finished
             LOG_INFO("TraceRoute cooldown finished, returning to IDLE");
             runState = TRACEROUTE_STATE_IDLE;
+            resultText = "";
+            clearResultLines();
             bannerText = "";
             UIFrameEvent e;
             e.action = UIFrameEvent::Action::REGENERATE_FRAMESET;
@@ -764,6 +877,7 @@ int32_t TraceRouteModule::runOnce()
             LOG_INFO("TraceRoute result display timeout, returning to IDLE");
             runState = TRACEROUTE_STATE_IDLE;
             resultText = "";
+            clearResultLines();
             bannerText = "";
             tracingNode = 0;
             UIFrameEvent e;

src/modules/TraceRouteModule.h

@@ -7,6 +7,7 @@
 #if HAS_SCREEN
 #include "OLEDDisplayUi.h"
 #endif
+#include <vector>
 
 #define ROUTE_SIZE sizeof(((meshtastic_RouteDiscovery *)0)->route) / sizeof(((meshtastic_RouteDiscovery *)0)->route[0])
 
@@ -49,12 +50,23 @@ class TraceRouteModule : public ProtobufModule<meshtastic_RouteDiscovery>,
     virtual int32_t runOnce() override;
 
   private:
+    void setResultText(const String &text);
+    void clearResultLines();
+#if HAS_SCREEN
+    void rebuildResultLines(OLEDDisplay *display);
+#endif
     // Call to add unknown hops (e.g. when a node couldn't decrypt it) to the route based on hopStart and current hopLimit
     void insertUnknownHops(meshtastic_MeshPacket &p, meshtastic_RouteDiscovery *r, bool isTowardsDestination);
 
     // Call to add your ID to the route array of a RouteDiscovery message
     void appendMyIDandSNR(meshtastic_RouteDiscovery *r, float snr, bool isTowardsDestination, bool SNRonly);
 
+    // Update next-hops in the routing table based on the returned route
+    void updateNextHops(meshtastic_MeshPacket &p, meshtastic_RouteDiscovery *r);
+
+    // Helper to update next-hop for a single node
+    void maybeSetNextHop(NodeNum target, uint8_t nextHopByte);
+
     /* Call to print the route array of a RouteDiscovery message.
        Set origin to where the request came from.
        Set dest to the ID of its destination, or NODENUM_BROADCAST if it has not yet arrived there. */
@@ -68,6 +80,8 @@ class TraceRouteModule : public ProtobufModule<meshtastic_RouteDiscovery>,
     unsigned long trackingTimeoutMs = 10000;
     String bannerText;
     String resultText;
+    std::vector<String> resultLines;
+    bool resultLinesDirty = false;
     NodeNum tracingNode = 0;
     bool initialized = false;
 };

src/modules/esp32/PaxcounterModule.cpp

@@ -141,6 +141,7 @@ void PaxcounterModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state
     display->drawStringf(display->getWidth() / 2 + x, graphics::getTextPositions(display)[line++], buffer,
                          "WiFi: %d\nBLE: %d\nUptime: %ds", count_from_libpax.wifi_count, count_from_libpax.ble_count,
                          millis() / 1000);
+    graphics::drawCommonFooter(display, x, y);
 }
 #endif // HAS_SCREEN
 

src/motion/BMX160Sensor.cpp

@@ -116,6 +116,7 @@ void BMX160Sensor::calibrate(uint16_t forSeconds)
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN)
     LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
+    highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
 
     doCalibration = true;
     uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
@@ -127,4 +128,4 @@ void BMX160Sensor::calibrate(uint16_t forSeconds)
 
 #endif
 
-#endif
+#endif

src/motion/ICM20948Sensor.cpp

@@ -157,6 +157,7 @@ void ICM20948Sensor::calibrate(uint16_t forSeconds)
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
     LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
+    highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
 
     doCalibration = true;
     uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
@@ -295,4 +296,4 @@ bool ICM20948Singleton::setWakeOnMotion()
     return true;
 }
 
-#endif
+#endif

src/motion/MotionSensor.cpp

@@ -69,7 +69,8 @@ void MotionSensor::wakeScreen()
 {
     if (powerFSM.getState() == &stateDARK) {
         LOG_DEBUG("Motion wakeScreen detected");
-        powerFSM.trigger(EVENT_INPUT);
+        if (config.display.wake_on_tap_or_motion)
+            powerFSM.trigger(EVENT_INPUT);
     }
 }
 
@@ -87,4 +88,4 @@ void MotionSensor::buttonPress() {}
 
 #endif
 
-#endif
+#endif

src/mqtt/MQTT.cpp

@@ -51,6 +51,7 @@ constexpr int reconnectMax = 5;
 static uint8_t bytes[meshtastic_MqttClientProxyMessage_size + 30]; // 12 for channel name and 16 for nodeid
 
 static bool isMqttServerAddressPrivate = false;
+static bool isConnected = false;
 
 inline void onReceiveProto(char *topic, byte *payload, size_t length)
 {
@@ -59,7 +60,27 @@ inline void onReceiveProto(char *topic, byte *payload, size_t length)
         LOG_ERROR("Invalid MQTT service envelope, topic %s, len %u!", topic, length);
         return;
     }
+
     const meshtastic_Channel &ch = channels.getByName(e.channel_id);
+    // Find channel by channel_id and check downlink_enabled
+    if (!(strcmp(e.channel_id, "PKI") == 0 ||
+          (strcmp(e.channel_id, channels.getGlobalId(ch.index)) == 0 && ch.settings.downlink_enabled))) {
+        return;
+    }
+
+    bool anyChannelHasDownlink = false;
+    size_t numChan = channels.getNumChannels();
+    for (size_t i = 0; i < numChan; ++i) {
+        const auto &c = channels.getByIndex(i);
+        if (c.settings.downlink_enabled) {
+            anyChannelHasDownlink = true;
+            break;
+        }
+    }
+
+    if (strcmp(e.channel_id, "PKI") == 0 && !anyChannelHasDownlink) {
+        return;
+    }
     // Generate node ID from nodenum for comparison
     std::string nodeId = nodeDB->getNodeId();
     if (strcmp(e.gateway_id, nodeId.c_str()) == 0) {
@@ -77,11 +98,6 @@ inline void onReceiveProto(char *topic, byte *payload, size_t length)
         return;
     }
 
-    // Find channel by channel_id and check downlink_enabled
-    if (!(strcmp(e.channel_id, "PKI") == 0 ||
-          (strcmp(e.channel_id, channels.getGlobalId(ch.index)) == 0 && ch.settings.downlink_enabled))) {
-        return;
-    }
     LOG_INFO("Received MQTT topic %s, len=%u", topic, length);
     if (e.packet->hop_limit > HOP_MAX || e.packet->hop_start > HOP_MAX) {
         LOG_INFO("Invalid hop_limit(%u) or hop_start(%u)", e.packet->hop_limit, e.packet->hop_start);
@@ -305,8 +321,10 @@ bool connectPubSub(const PubSubConfig &config, PubSubClient &pubSub, Client &cli
     std::string nodeId = nodeDB->getNodeId();
     const bool connected = pubSub.connect(nodeId.c_str(), config.mqttUsername, config.mqttPassword);
     if (connected) {
+        isConnected = true;
         LOG_INFO("MQTT connected");
     } else {
+        isConnected = false;
         LOG_WARN("Failed to connect to MQTT server");
     }
     return connected;
@@ -492,6 +510,7 @@ bool MQTT::publish(const char *topic, const uint8_t *payload, size_t length, boo
 
 void MQTT::reconnect()
 {
+    isConnected = false;
     if (wantsLink()) {
         if (moduleConfig.mqtt.proxy_to_client_enabled) {
             LOG_INFO("MQTT connect via client proxy instead");
@@ -519,7 +538,7 @@ void MQTT::reconnect()
             runASAP = true;
             reconnectCount = 0;
             isMqttServerAddressPrivate = isPrivateIpAddress(clientConnection->remoteIP());
-
+            isConnected = true;
             publishNodeInfo();
             sendSubscriptions();
         } else {
@@ -673,7 +692,10 @@ void MQTT::publishNodeInfo()
 }
 void MQTT::publishQueuedMessages()
 {
-    if (mqttQueue.isEmpty())
+    if (mqttQueue.isEmpty() || !isConnected)
+        return;
+
+    if (!moduleConfig.mqtt.proxy_to_client_enabled && !isConnected)
         return;
 
     LOG_DEBUG("Publish enqueued MQTT message");
@@ -880,4 +902,4 @@ void MQTT::perhapsReportToMap()
 
     // Update the last report time
     last_report_to_map = millis();
-}
+}