Remove amd64

These comments were circa 4 years old. Remove them.

.devcontainer/Dockerfile

@@ -0,0 +1,25 @@
+FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
+
+# [Optional] Uncomment this section to install additional packages.
+RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
+    && apt-get -y install --no-install-recommends \
+    ca-certificates \
+    g++ \
+    git \
+    libbluetooth-dev \
+    libgpiod-dev \
+    liborcania-dev \
+    libssl-dev \
+    libulfius-dev \
+    libyaml-cpp-dev \
+    pipx \
+    pkg-config \
+    python3 \
+    python3-pip \
+    python3-venv \
+    python3-wheel \
+    wget \
+    zip \
+    && apt-get clean && rm -rf /var/lib/apt/lists/*
+
+RUN pipx install platformio==6.1.15

.devcontainer/devcontainer.json

@@ -0,0 +1,28 @@
+// For format details, see https://aka.ms/devcontainer.json. For config options, see the
+// README at: https://github.com/devcontainers/templates/tree/main/src/cpp
+{
+  "name": "Meshtastic Firmware Dev",
+  "build": {
+    "dockerfile": "Dockerfile"
+  },
+  "features": {
+    "ghcr.io/devcontainers/features/python:1": {
+      "installTools": true,
+      "version": "latest"
+    }
+  },
+  "customizations": {
+    "vscode": {
+      "extensions": [
+        "ms-vscode.cpptools",
+        "platformio.platformio-ide",
+      ]
+    }
+  },
+
+  // Use 'forwardPorts' to make a list of ports inside the container available locally.
+  "forwardPorts": [ 4403 ],
+
+  // Run commands to prepare the container for use
+  "postCreateCommand": ".devcontainer/setup.sh",
+}

.devcontainer/setup.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+git submodule update --init

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,10 +49,24 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
+        - Heltec Mesh Node T114
+        - Heltec Vision Master E213
+        - Heltec Vision Master E290
+        - Heltec Vision Master T190
+        - Nano G1
+        - Nano G1 Explorer
+        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - Seeed Wio Tracker 1110
+        - Seeed Card Tracker T1000-E
+        - Station G1
+        - Station G2
+        - unPhone
+        - CanaryOne
+        - Chatter
+        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,6 +18,7 @@ body:
         - ESP32
         - RP2040
         - Linux Native
+        - Cross-Platform
         - other
     validations:
       required: true

.github/actions/build-variant/action.yml

@@ -0,0 +1,90 @@
+name: Setup Build Variant Composite Action
+description: Variant build actions for Meshtastic Platform IO steps
+
+inputs:
+  board:
+    description: The board to build for
+    required: true
+  github_token:
+    description: GitHub token
+    required: true
+  build-script-path:
+    description: Path to the build script
+    required: true
+  remove-debug-flags:
+    description: A space separated list of files to remove debug flags from
+    required: false
+    default: ""
+  ota-firmware-source:
+    description: The OTA firmware file to pull
+    required: false
+    default: ""
+  ota-firmware-target:
+    description: The target path to store the OTA firmware file
+    required: false
+    default: ""
+  artifact-paths:
+    description: A newline separated list of paths to store as artifacts
+    required: false
+    default: ""
+  include-web-ui:
+    description: Include the web UI in the build
+    required: false
+    default: "false"
+
+runs:
+  using: composite
+  steps:
+    - name: Build base
+      id: base
+      uses: ./.github/actions/setup-base
+
+    - name: Pull web ui
+      if: inputs.include-web-ui == 'true'
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: meshtastic/web
+        file: build.tar
+        target: build.tar
+        token: ${{ inputs.github_token }}
+
+    - name: Unpack web ui
+      if: inputs.include-web-ui == 'true'
+      shell: bash
+      run: |
+        tar -xf build.tar -C data/static
+        rm build.tar
+
+    - name: Remove debug flags for release
+      shell: bash
+      if: inputs.remove-debug-flags != ''
+      run: |
+        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
+          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
+        done
+
+    - name: Build ${{ inputs.board }}
+      shell: bash
+      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
+
+    - name: Pull OTA Firmware
+      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: meshtastic/firmware-ota
+        file: ${{ inputs.ota-firmware-source }}
+        target: ${{ inputs.ota-firmware-target }}
+        token: ${{ inputs.github_token }}
+
+    - name: Get release version string
+      shell: bash
+      run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+      id: version
+
+    - name: Store binaries as an artifact
+      uses: actions/upload-artifact@v4
+      with:
+        name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+        overwrite: true
+        path: |
+          ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -11,7 +11,7 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Install dependencies 
+    - name: Install dependencies
       shell: bash
       run: |
         sudo apt-get -y update --fix-missing
@@ -22,19 +22,21 @@ runs:
       with:
         python-version: 3.x
 
-    - name: Cache python libs
-      uses: actions/cache@v4
-      id: cache-pip # needed in if test
-      with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip
+    # - name: Cache python libs
+    #   uses: actions/cache@v4
+    #   id: cache-pip # needed in if test
+    #   with:
+    #     path: ~/.cache/pip
+    #     key: ${{ runner.os }}-pip
 
     - name: Upgrade python tools
       shell: bash
       run: |
         python -m pip install --upgrade pip
-        pip install -U platformio adafruit-nrfutil
-        pip install -U meshtastic --pre
+        pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
+        pip install -U platformio adafruit-nrfutil --no-build-isolation
+        pip install -U poetry --no-build-isolation
+        pip install -U meshtastic --pre --no-build-isolation
 
     - name: Upgrade platformio
       shell: bash

.github/dependabot.yml

@@ -0,0 +1,26 @@
+version: 2
+updates:
+  - package-ecosystem: docker
+    directory: devcontainer
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: docker
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: gitsubmodule
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: github-actions
+    directory: /.github/workflows
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,9 +1,9 @@
+### ❌ (Please delete all these tips and replace them with your text) ❌
+
 ## Thank you for sending in a pull request, here's some tips to get started!
 
-(Please delete all these tips and replace with your text)
-
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
-  to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
+  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
@@ -12,3 +12,4 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
+- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord

.github/workflows/build_esp32.yml

@@ -12,52 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/firmware-ota
-          file: firmware.bin
-          target: release/bleota.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware.bin
+          ota-firmware-target: release/bleota.bin
+          artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true

.github/workflows/build_esp32_c3.yml

@@ -14,50 +14,21 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+      - name: Build ESP32-C3
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
-      - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/firmware-ota
-          file: firmware-c3.bin
-          target: release/bleota-c3.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-c3.bin
+          ota-firmware-target: release/bleota-c3.bin
+          artifact-paths: |
             release/*.bin
             release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -12,50 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+      - name: Build ESP32-S3
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
-      - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/firmware-ota
-          file: firmware-s3.bin
-          target: release/bleota-s3.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-s3.bin
+          ota-firmware-target: release/bleota-s3.bin
+          artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true

.github/workflows/build_native.yml

@@ -10,7 +10,7 @@ jobs:
   build-native:
     runs-on: ubuntu-latest
     steps:
-      - name: Install libbluetooth
+      - name: Install libs needed for native build
         shell: bash
         run: |
           sudo apt-get update --fix-missing
@@ -67,7 +67,7 @@ jobs:
       - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           file: ./Dockerfile
@@ -77,7 +77,7 @@ jobs:
       - name: Docker build and push
         if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           file: ./Dockerfile

.github/workflows/build_nrf52.yml

@@ -12,23 +12,15 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
       - name: Build NRF52
-        run: bin/build-nrf52.sh ${{ inputs.board }}
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-nrf52.sh
+          artifact-paths: |
             release/*.hex
             release/*.uf2
             release/*.elf

.github/workflows/build_rpi2040.yml

@@ -12,22 +12,14 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
       - name: Build Raspberry Pi 2040
-        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-rpi2040.sh
+          artifact-paths: |
             release/*.uf2
             release/*.elf

.github/workflows/build_stm32.yml

@@ -0,0 +1,25 @@
+name: Build STM32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-stm32:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Build Raspberry Pi 2040
+        id: build
+        uses: ./.github/actions/build-variant
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-stm32.sh
+          artifact-paths: |
+            release/*.hex
+            release/*.bin

.github/workflows/main_matrix.yml

@@ -24,7 +24,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, check]
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, stm32, check]
     runs-on: ubuntu-latest
     steps:
       - id: checkout
@@ -41,6 +41,7 @@ jobs:
       esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   check:
@@ -50,6 +51,7 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
       - uses: actions/checkout@v4
       - name: Build base
@@ -103,17 +105,27 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
+  build-stm32:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
+    uses: ./.github/workflows/build_stm32.yml
+    with:
+      board: ${{ matrix.board }}
+
   package-raspbian:
     uses: ./.github/workflows/package_raspbian.yml
 
   package-raspbian-armv7l:
     uses: ./.github/workflows/package_raspbian_armv7l.yml
 
-  package-native:
-    uses: ./.github/workflows/package_amd64.yml
+  # package-native:
+  #   uses: ./.github/workflows/package_amd64.yml
 
   after-checks:
     runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [check]
     steps:
       - name: Checkout code
@@ -127,16 +139,16 @@ jobs:
       contents: write
       pull-requests: write
     runs-on: ubuntu-latest
-    needs:
-      [
+    needs: [
         build-esp32,
         build-esp32-s3,
         build-esp32-c3,
         build-nrf52,
         build-rpi2040,
+        build-stm32,
         package-raspbian,
         package-raspbian-armv7l,
-        package-native,
+        # package-native,
       ]
     steps:
       - name: Checkout code
@@ -220,7 +232,7 @@ jobs:
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [gather-artifacts, after-checks]
+    needs: [gather-artifacts]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -240,12 +252,6 @@ jobs:
           merge-multiple: true
           path: ./output
 
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
-          merge-multiple: true
-          path: ./output
-
       - name: Display structure of downloaded files
         run: ls -R
 
@@ -255,7 +261,7 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x meshtasticd_*
 
       - uses: actions/download-artifact@v4
         with:
@@ -303,6 +309,12 @@ jobs:
           asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
           asset_content_type: application/zip
 
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
+
       - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
         env:
@@ -323,22 +335,50 @@ jobs:
           asset_name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
           asset_content_type: application/vnd.debian.binary-package
 
-      - name: Add raspbian amd64 .deb
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
-          asset_name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
-          asset_content_type: application/vnd.debian.binary-package
+      # - name: Add raspbian amd64 .deb
+      #   uses: actions/upload-release-asset@v1
+      #   env:
+      #     GITHUB_TOKEN: ${{ github.token }}
+      #   with:
+      #     upload_url: ${{ steps.create_release.outputs.upload_url }}
+      #     asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+      #     asset_name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+      #     asset_content_type: application/vnd.debian.binary-package
 
       - name: Bump version.properties
         run: >-
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v6
+        uses: peter-evans/create-pull-request@v7
         with:
+          title: Bump version.properties
           add-paths: |
             version.properties
+
+      - name: Checkout meshtastic/meshtastic.github.io
+        uses: actions/checkout@v4
+        with:
+          repository: meshtastic/meshtastic.github.io
+          token: ${{ secrets.ARTIFACTS_TOKEN }}
+          path: meshtastic.github.io
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Extract firmware.zip
+        run: |
+          unzip ./firmware-${{ steps.version.outputs.version }}.zip -d meshtastic.github.io/firmware-${{ steps.version.outputs.version }}
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Commit and push changes
+        run: |
+          cd meshtastic.github.io
+          find . -type f -name 'meshtasticd_*' -exec rm -f {} +
+          git config --global user.name "github-actions[bot]"
+          git config --global user.email "github-actions[bot]@users.noreply.github.com"
+          git add .
+          git commit -m "Add firmware version ${{ steps.version.outputs.version }}"
+          git push

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-native
     steps:
       - name: Checkout code

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian
     steps:
       - name: Checkout code

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code

.github/workflows/sec_sast_semgrep_cron.yml

@@ -12,7 +12,7 @@ jobs:
   semgrep-full:
     runs-on: ubuntu-latest
     container:
-      image: returntocorp/semgrep
+      image: semgrep/semgrep
 
     steps:
       # step 1

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,9 +4,9 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     container:
-      image: returntocorp/semgrep
+      image: semgrep/semgrep
 
     steps:
       # step 1

.github/workflows/tests.yml

@@ -0,0 +1,91 @@
+name: End to end tests
+
+on:
+  schedule:
+    - cron: "0 0 * * *" # Run every day at midnight
+  workflow_dispatch: {}
+
+jobs:
+  test-simulator:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          sudo apt-get update --fix-missing
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Native
+        run: bin/build-native.sh
+
+      # We now run integration test before other build steps (to quickly see runtime failures)
+      - name: Build for native
+        run: platformio run -e native
+
+      - name: Integration test
+        run: |
+          .pio/build/native/program & sleep 10 # 5 seconds was not enough
+          echo "Simulator started, launching python test..."
+          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+      - name: PlatformIO Tests
+        run: platformio test -e native --junit-output-path testreport.xml
+
+      - name: Test Report
+        uses: dorny/test-reporter@v1.9.1
+        if: success() || failure() # run this step even if previous step failed
+        with:
+          name: PlatformIO Tests
+          path: testreport.xml
+          reporter: java-junit
+
+  hardware-tests:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
+          pip install -U platformio adafruit-nrfutil --no-build-isolation
+          pip install -U poetry --no-build-isolation
+          pip install -U meshtastic --pre --no-build-isolation
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Setup pnpm
+        uses: pnpm/action-setup@v4
+        with:
+          version: latest
+
+      - name: Install Dependencies
+        run: pnpm install
+
+      - name: Setup devices
+        run: pnpm run setup
+
+      - name: Execute end to end tests on connected hardware
+        run: pnpm run test

.github/workflows/update_protobufs.yml

@@ -1,4 +1,4 @@
-name: "Update protobufs and regenerate classes"
+name: Update protobufs and regenerate classes
 on: workflow_dispatch
 
 jobs:
@@ -26,8 +26,9 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v6
+        uses: peter-evans/create-pull-request@v7
         with:
+          title: Update protobufs and classes
           add-paths: |
             protobufs
             src/mesh

.gitmodules

@@ -1,3 +1,6 @@
 [submodule "protobufs"]
 	path = protobufs
 	url = https://github.com/meshtastic/protobufs.git
+[submodule "meshtestic"]
+	path = meshtestic
+	url = https://github.com/meshtastic/meshTestic

.gitpod.yml

@@ -0,0 +1,2 @@
+tasks:
+  - init: pip install platformio && pip install --upgrade pip

.trunk/trunk.yaml

@@ -1,36 +1,36 @@
 version: 0.1
 cli:
-  version: 1.22.2
+  version: 1.22.3
 plugins:
   sources:
     - id: trunk
-      ref: v1.5.0
+      ref: v1.6.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.76.3
+    - trufflehog@3.81.9
     - yamllint@1.35.1
-    - bandit@1.7.8
-    - checkov@3.2.95
+    - bandit@1.7.9
+    - checkov@3.2.238
     - terrascan@1.19.1
-    - trivy@0.51.1
+    - trivy@0.54.1
     #- trufflehog@3.63.2-rc0
-    - taplo@0.8.1
-    - ruff@0.4.4
+    - taplo@0.9.3
+    - ruff@0.6.2
     - isort@5.13.2
-    - markdownlint@0.40.0
-    - oxipng@9.1.1
+    - markdownlint@0.41.0
+    - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.0
-    - flake8@7.0.0
+    - actionlint@1.7.1
+    - flake8@7.1.1
     - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.4.2
+    - black@24.8.0
     - git-diff-check
-    - gitleaks@8.18.2
+    - gitleaks@8.18.4
     - clang-format@16.0.3
-    - prettier@3.2.5
+    - prettier@3.3.3
   ignore:
     - linters: [ALL]
       paths:

.vscode/extensions.json

@@ -2,8 +2,9 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-		"ms-vscode.cpptools",
-        "platformio.platformio-ide",
-        "trunk.io"
+        "platformio.platformio-ide"
     ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
 }

CONTRIBUTING.md

@@ -0,0 +1,47 @@
+# Contributing to Meshtastic Firmware
+
+We're excited that you're interested in contributing to the Meshtastic firmware! This document provides a high-level overview of how you can get involved.
+
+## Important First Steps
+
+Before you begin, please:
+
+1. **Read our documentation**: Our [official documentation](https://meshtastic.org/docs/) is a crucial resource. It contains essential information about the project.
+
+2. **Check out the firmware build guide**: For specific instructions on setting up your development environment and building the firmware, refer to our [Firmware Build Guide](https://meshtastic.org/docs/development/firmware/build/).
+
+3. Read our [Code of Conduct](https://meshtastic.org/docs/legal/conduct/)
+
+4. Join our [Discord community](https://discord.com/invite/ktMAKGBnBs) to connect with developers and other contributors to get help.
+
+## Getting Help and Discussing Ideas
+
+We encourage open communication and discussion before diving into code changes:
+
+1. **Use GitHub Discussions**: For new ideas, questions, or to discuss potential changes, start a conversation in our [GitHub Discussions](https://github.com/meshtastic/firmware/discussions) first. This helps us collaborate and avoid duplicate work.
+
+2. **Join our Discord**: For real-time chat and quick questions, join our [Discord server](https://discord.com/invite/ktMAKGBnBs). It's a great place to get help and connect with other developers and the community.
+
+3. **Reporting Issues**: If you've identified a bug, please use our bug report template when creating a new issue in the [issue tracker](https://github.com/meshtastic/firmware/issues). Ensure you've searched existing issues to avoid duplicates.
+
+## Making Contributions
+
+> [!IMPORTANT]
+> Before making any contributions, you must sign our Contributor License Agreement (CLA). You can do this by visiting https://cla-assistant.io/meshtastic/firmware. Be sure to use the GitHub account you will use to submit your contributions when signing.
+
+1. Fork the repository
+2. Create a new branch for your feature or bug fix
+3. Make your changes
+4. Test your changes thoroughly
+5. Create a pull request with a clear description, using the provided template, of your changes. Be sure to enable "Allow edits from maintainers".
+
+## Coding Standards
+
+To ensure consistent code formatting across the project:
+
+1. Install the [Trunk](https://marketplace.visualstudio.com/items?itemName=Trunk.io) extension for Visual Studio Code.
+2. Before submitting your changes, run `trunk fmt` to automatically format your code according to our standards.
+
+Adhering to these formatting guidelines helps maintain code consistency and makes the review process smoother.
+
+Thank you for contributing to Meshtastic!

arch/esp32/esp32.ini

@@ -5,7 +5,7 @@ custom_esp32_kind = esp32
 platform = platformio/espressif32@6.7.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -48,6 +48,7 @@ lib_deps =
   https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
 
 lib_ignore = 
   segger_rtt

arch/nrf52/cpp_overrides/lfs_util.h

@@ -0,0 +1,208 @@
+/*
+ * lfs utility functions
+ *
+ * Copyright (c) 2017, Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// MESHTASTIC/@geeksville note: This file is copied from the Adafruit nrf52 arduino lib.  And we use a special -include in
+// nrf52.ini to load it before EVERY file we do this hack because the default definitions for LFS_ASSERT are quite poor and we
+// don't want to fork the adafruit lib (again) and send in a PR that they probably won't merge anyways. This file might break if
+// they ever update lfs.util on their side, in which case we'll need to update this file to match their new version. The version
+// this is a copy from is almost exactly
+// https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/c25d93268a3b9c23e9a1ccfcaf9b208beca624ca/libraries/Adafruit_LittleFS/src/littlefs/lfs_util.h
+
+#ifndef LFS_UTIL_H
+#define LFS_UTIL_H
+
+// Users can override lfs_util.h with their own configuration by defining
+// LFS_CONFIG as a header file to include (-DLFS_CONFIG=lfs_config.h).
+//
+// If LFS_CONFIG is used, none of the default utils will be emitted and must be
+// provided by the config file. To start I would suggest copying lfs_util.h and
+// modifying as needed.
+#ifdef LFS_CONFIG
+#define LFS_STRINGIZE(x) LFS_STRINGIZE2(x)
+#define LFS_STRINGIZE2(x) #x
+#include LFS_STRINGIZE(LFS_CONFIG)
+#else
+
+// System includes
+#include <stdbool.h>
+#include <stdint.h>
+#include <string.h>
+
+#ifndef LFS_NO_MALLOC
+#include <stdlib.h>
+#endif
+#ifndef LFS_NO_ASSERT
+#include <assert.h>
+#endif
+
+#if !defined(LFS_NO_DEBUG) || !defined(LFS_NO_WARN) || !defined(LFS_NO_ERROR)
+#include <stdio.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Macros, may be replaced by system specific wrappers. Arguments to these
+// macros must not have side-effects as the macros can be removed for a smaller
+// code footprint
+
+// Logging functions
+#ifndef LFS_NO_DEBUG
+
+void logLegacy(const char *level, const char *fmt, ...);
+#define LFS_DEBUG(fmt, ...) logLegacy("DEBUG", "lfs debug:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_DEBUG(fmt, ...)
+#endif
+
+#ifndef LFS_NO_WARN
+#define LFS_WARN(fmt, ...) logLegacy("WARN", "lfs warn:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_WARN(fmt, ...)
+#endif
+
+#ifndef LFS_NO_ERROR
+#define LFS_ERROR(fmt, ...) logLegacy("ERROR", "lfs error:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_ERROR(fmt, ...)
+#endif
+
+// Runtime assertions
+#ifndef LFS_NO_ASSERT
+#define LFS_ASSERT(test) assert(test)
+#else
+extern void lfs_assert(const char *reason);
+#define LFS_ASSERT(test)                                                                                                         \
+    if (!(test))                                                                                                                 \
+    lfs_assert(#test)
+#endif
+
+// Builtin functions, these may be replaced by more efficient
+// toolchain-specific implementations. LFS_NO_INTRINSICS falls back to a more
+// expensive basic C implementation for debugging purposes
+
+// Min/max functions for unsigned 32-bit numbers
+static inline uint32_t lfs_max(uint32_t a, uint32_t b)
+{
+    return (a > b) ? a : b;
+}
+
+static inline uint32_t lfs_min(uint32_t a, uint32_t b)
+{
+    return (a < b) ? a : b;
+}
+
+// Find the next smallest power of 2 less than or equal to a
+static inline uint32_t lfs_npw2(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
+    return 32 - __builtin_clz(a - 1);
+#else
+    uint32_t r = 0;
+    uint32_t s;
+    a -= 1;
+    s = (a > 0xffff) << 4;
+    a >>= s;
+    r |= s;
+    s = (a > 0xff) << 3;
+    a >>= s;
+    r |= s;
+    s = (a > 0xf) << 2;
+    a >>= s;
+    r |= s;
+    s = (a > 0x3) << 1;
+    a >>= s;
+    r |= s;
+    return (r | (a >> 1)) + 1;
+#endif
+}
+
+// Count the number of trailing binary zeros in a
+// lfs_ctz(0) may be undefined
+static inline uint32_t lfs_ctz(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && defined(__GNUC__)
+    return __builtin_ctz(a);
+#else
+    return lfs_npw2((a & -a) + 1) - 1;
+#endif
+}
+
+// Count the number of binary ones in a
+static inline uint32_t lfs_popc(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
+    return __builtin_popcount(a);
+#else
+    a = a - ((a >> 1) & 0x55555555);
+    a = (a & 0x33333333) + ((a >> 2) & 0x33333333);
+    return (((a + (a >> 4)) & 0xf0f0f0f) * 0x1010101) >> 24;
+#endif
+}
+
+// Find the sequence comparison of a and b, this is the distance
+// between a and b ignoring overflow
+static inline int lfs_scmp(uint32_t a, uint32_t b)
+{
+    return (int)(unsigned)(a - b);
+}
+
+// Convert from 32-bit little-endian to native order
+static inline uint32_t lfs_fromle32(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_LITTLE_ENDIAN) ||                                \
+                                    (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_LITTLE_ENDIAN) ||                          \
+                                    (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__))
+    return a;
+#elif !defined(LFS_NO_INTRINSICS) &&                                                                                             \
+    ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_BIG_ENDIAN) || (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_BIG_ENDIAN) || \
+     (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__))
+    return __builtin_bswap32(a);
+#else
+    return (((uint8_t *)&a)[0] << 0) | (((uint8_t *)&a)[1] << 8) | (((uint8_t *)&a)[2] << 16) | (((uint8_t *)&a)[3] << 24);
+#endif
+}
+
+// Convert to 32-bit little-endian from native order
+static inline uint32_t lfs_tole32(uint32_t a)
+{
+    return lfs_fromle32(a);
+}
+
+// Calculate CRC-32 with polynomial = 0x04c11db7
+void lfs_crc(uint32_t *crc, const void *buffer, size_t size);
+
+// Allocate memory, only used if buffers are not provided to littlefs
+static inline void *lfs_malloc(size_t size)
+{
+#ifndef LFS_NO_MALLOC
+    extern void *pvPortMalloc(size_t xWantedSize);
+    return pvPortMalloc(size);
+#else
+    (void)size;
+    return NULL;
+#endif
+}
+
+// Deallocate memory, only used if buffers are not provided to littlefs
+static inline void lfs_free(void *p)
+{
+#ifndef LFS_NO_MALLOC
+    extern void vPortFree(void *pv);
+    vPortFree(p);
+#else
+    (void)p;
+#endif
+}
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif
+#endif

arch/nrf52/nrf52.ini

@@ -2,9 +2,13 @@
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
 platform = platformio/nordicnrf52@^10.5.0
 extends = arduino_base
+platform_packages =
+  ; our custom Git version until they merge our PR
+  framework-arduinoadafruitnrf52 @ https://github.com/geeksville/Adafruit_nRF52_Arduino.git
 
 build_type = debug
-build_flags = 
+build_flags =
+  -include arch/nrf52/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
@@ -12,10 +16,11 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}
+  rweather/Crypto@^0.4.0
 
 lib_ignore =
   BluetoothOTA

arch/nrf52/nrf52840.ini

@@ -7,3 +7,72 @@ lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
+
+; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
+
+; We want the initial breakpoint at setup() instead of main().  Also we want to enable semihosting at that point so instead of
+debug_init_break = tbreak setup
+; we just turn off the platformio tbreak and do it in .gdbinit (where we have more flexibility for scripting)
+; also we use a permanent breakpoint so it gets reused each time we restart the debugging session?
+; debug_init_break = tbreak main
+
+; Note: add "monitor arm semihosting_redirect tcp 4444 all" if you want the stdout from the device to go to that port number instead
+; (for use by meshtastic command line)
+;  monitor arm semihosting disable
+;  monitor debug_level 3
+;
+; IMPORTANT: fileio must be disabled before using port 5555 - openocd ver 0.12 has a bug where if enabled it never properly parses the special :tt name
+; for stdio access.
+;   monitor arm semihosting_redirect tcp 5555 stdio
+
+; Also note: it is _impossible_ to do non blocking reads on the semihost console port (an oversight when ARM specified the semihost API).
+; So we'll neve be able to general purpose bi-directional communication with the device over semihosting.
+debug_extra_cmds =
+  echo Running .gdbinit script
+  ;monitor arm semihosting enable
+  ;monitor arm semihosting_fileio enable
+  ;monitor arm semihosting_redirect disable
+  commands 1
+  ; echo Breakpoint at setup() has semihosting console, connect to it with "telnet localhost 5555"
+  ; set wantSemihost = 1
+  set useSoftDevice = 0
+  end
+
+  ; Only reprogram the board if the code has changed
+debug_load_mode = modified
+;debug_load_mode = manual
+; We default to the stlink adapter because it is very cheap and works well, though others (such as jlink) are also supported.
+;debug_tool = jlink
+debug_tool = stlink
+debug_speed = 4000
+;debug_tool = custom
+; debug_server =
+;  openocd
+;  -f
+;  /usr/local/share/openocd/scripts/interface/stlink.cfg
+;  -f
+;  /usr/local/share/openocd/scripts/target/nrf52.cfg
+; $PLATFORMIO_CORE_DIR/packages/tool-openocd/openocd/scripts/interface/cmsis-dap.cfg
+
+; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
+; programming time is about the same as the bootloader version.
+; For information on this see the meshtastic developers documentation for "Development on the NRF52"
+; We manually pass in the elf file so that pyocd can reverse engineer FreeRTOS data (running threads, etc...)
+;debug_server =
+;  pyocd
+;  gdbserver
+;  -j
+;  ${platformio.workspace_dir}/..
+;  -t
+;  nrf52840
+;  --semihosting
+;  --elf
+;  ${platformio.build_dir}/${this.__env__}/firmware.elf
+
+; If you want to debug the semihosting support you can turn on extra logging in pyocd with
+;   -L
+;   pyocd.debug.semihost.trace=debug
+
+; The following is not needed because it automatically tries do this
+;debug_server_ready_pattern = -.*GDB server started on port \d+.*
+;debug_port = localhost:3333

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
+platform = https://github.com/meshtastic/platform-native.git#6b3796d697481c8f6e3f4aa5c111bd9979f29e64
 framework = arduino
 
 build_src_filter = 
@@ -9,7 +9,7 @@ build_src_filter =
   -<nimble/> 
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
-  -<platform/rp2040>
+  -<platform/rp2xx0>
   -<mesh/wifi/>
   -<mesh/http/>
   +<mesh/raspihttp/>

arch/rp2xx0/rp2040.ini

@@ -8,7 +8,7 @@ board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/platform/rp2040
+  -Isrc/platform/rp2xx0
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 

arch/rp2xx0/rp2350.ini

@@ -0,0 +1,23 @@
+; Common settings for rp2040 Processor based targets
+[rp2350_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9e55f6db5c56b9867c69fe473f388beea4546672
+extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#a6ab6e1f95bc1428d667d55ea7173c0744acc03c ; 4.0.2+
+
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable 
+  -Isrc/platform/rp2xx0
+  -D__PLAT_RP2040__
+#  -D _POSIX_THREADS
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
+
+lib_ignore =
+  BluetoothOTA
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  rweather/Crypto

arch/stm32/stm32.ini

@@ -0,0 +1,37 @@
+[stm32_base]
+extends = arduino_base
+platform = ststm32
+platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#361a7fdb67e2a7104e99b4f42a802469eef8b129
+
+build_type = release
+
+;board_build.flash_offset = 0x08000000
+
+build_flags = 
+  ${arduino_base.build_flags}
+  -flto
+  -Isrc/platform/stm32wl -g
+  -DMESHTASTIC_MINIMIZE_BUILD
+  -DMESHTASTIC_EXCLUDE_GPS
+  -DDEBUG_MUTE
+;  -DVECT_TAB_OFFSET=0x08000000
+  -DconfigUSE_CMSIS_RTOS_V2=1
+;  -DSPI_MODE_0=SPI_MODE0
+  -fmerge-all-constants
+  -ffunction-sections
+  -fdata-sections
+  
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
+lib_deps =
+  ${env.lib_deps}
+  charlesbaynham/OSFS@^1.2.3
+  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
+
+lib_ignore =
+  https://github.com/mathertel/OneButton@~2.6.1
+  Wire

arch/stm32/stm32wl5e.ini

@@ -1,28 +0,0 @@
-[stm32wl5e_base]
-platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
-platform = ststm32
-board = generic_wl5e
-framework = arduino
-
-build_type = debug
-
-build_flags = 
-  ${arduino_base.build_flags}
-  -Isrc/platform/stm32wl -g
-  -DconfigUSE_CMSIS_RTOS_V2=1
-  -DVECT_TAB_OFFSET=0x08000000
-  
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
-
-board_upload.offset_address = 0x08000000
-upload_protocol = stlink
-
-lib_deps =
-  ${env.lib_deps}
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
-  https://github.com/littlefs-project/littlefs.git#v2.5.1
-  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
-
-lib_ignore =
-  mathertel/OneButton

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-nrf52.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
@@ -46,3 +46,8 @@ else
 	cp bin/device-update.* $OUTDIR
 	cp bin/*.uf2 $OUTDIR
 fi
+
+if (echo $1 | grep -q "rak4631"); then
+	echo "Copying hex file"
+	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
+fi

bin/build-rpi2040.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32.sh

@@ -0,0 +1,29 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update -e $1
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename.bin

bin/config-dist.yaml

@@ -54,6 +54,8 @@ Lora:
 
 #  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
 
+#  spiSpeed: 2000000
+
 ### Set gpio chip to use in /dev/. Defaults to 0.
 ### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
 #  gpiochip: 4
@@ -111,6 +113,9 @@ Display:
 #  Height: 320
 #  Rotate: true
 
+### You can also specify the spi device for the display to use
+# spidev: spidev0.0
+
 Touchscreen:
 ### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
 
@@ -126,15 +131,21 @@ Touchscreen:
 #  CS: 7
 #  IRQ: 17
 
-### Configure device for direct keyboard input
+### You can also specify the spi device for the touchscreen to use
+# spidev: spidev0.0
+
 
 Input:
+### Configure device for direct keyboard input
+
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
 ###
 
 Logging:
   LogLevel: info # debug, info, warn, error
+#  TraceFile: /var/log/meshtasticd.json
+#  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
 #  Port: 443 # Port for Webserver & Webservices
@@ -142,3 +153,4 @@ Webserver:
 
 General:
   MaxNodes: 200
+  MaxMessageQueue: 100

bin/platformio-custom.py

@@ -1,3 +1,4 @@
+#!/usr/bin/env python3
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
@@ -78,6 +79,11 @@ if platform.name == "espressif32":
         # For newer ESP32 targets, using newlib nano works better.
         env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
 
+if platform.name == "nordicnrf52":
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
+                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                                        "Generating UF2 file"))
+
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"

bin/readprops.py

@@ -1,9 +1,5 @@
-
-
-import subprocess
 import configparser
-import traceback
-import sys
+import subprocess
 
 
 def readProps(prefsLoc):
@@ -11,27 +7,36 @@ def readProps(prefsLoc):
 
     config = configparser.RawConfigParser()
     config.read(prefsLoc)
-    version = dict(config.items('VERSION'))
-    verObj = dict(short = "{}.{}.{}".format(version["major"], version["minor"], version["build"]),
-        long = "unset")
+    version = dict(config.items("VERSION"))
+    verObj = dict(
+        short="{}.{}.{}".format(version["major"], version["minor"], version["build"]),
+        long="unset",
+    )
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
-        sha = subprocess.check_output(
-            ['git', 'rev-parse', '--short', 'HEAD']).decode("utf-8").strip()
-        isDirty = subprocess.check_output(
-            ['git', 'diff', 'HEAD']).decode("utf-8").strip()
+        sha = (
+            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
+            .decode("utf-8")
+            .strip()
+        )
+        isDirty = (
+            subprocess.check_output(["git", "diff", "HEAD"]).decode("utf-8").strip()
+        )
         suffix = sha
         # if isDirty:
         #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
         #     suffix = sha + "-d"
-        verObj['long'] = "{}.{}.{}.{}".format(
-            version["major"], version["minor"], version["build"], suffix)
+        verObj["long"] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix
+        )
     except:
         # print("Unexpected error:", sys.exc_info()[0])
         # traceback.print_exc()
-        verObj['long'] = verObj['short']
+        verObj["long"] = verObj["short"]
 
     # print("firmware version " + verStr)
     return verObj
+
+
 # print("path is" + ','.join(sys.path))

bin/wio_tracker_bootloader_update.bin

@@ -0,0 +1,30 @@
+# tips from mark on how to replace the (broken) bootloader on the red wio_tracker_1110 boards.
+
+~/.platformio/penv/bin/adafruit-nrfutil --verbose dfu serial --package wio_tracker_1110_bootloader-0.9.1_s140_7.3.0.zip -p /dev/ttyACM1 -b 115200 --singlebank --touch 1200
+
+exit
+
+# Output should look like
+
+Upgrading target on /dev/ttyACM1 with DFU package /home/kevinh/development/meshtastic/WioWM1110/wio_tracker_1110_bootloader-0.9.1_s140_7.3.0.zip. Flow control is disabled, Single bank, Touch 1200
+Touched serial port /dev/ttyACM1
+Opened serial port /dev/ttyACM1
+Starting DFU upgrade of type 3, SoftDevice size: 152728, bootloader size: 39000, application size: 0
+Sending DFU start packet
+Sending DFU init packet
+Sending firmware file
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+###############
+Activating new firmware
+
+DFU upgrade took 20.242434978485107s
+Device programmed.
+

boards/CDEBYTE_EoRa-S3.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "CDEBYTE_EoRa-S3"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/ESP32-S3-WROOM-1-N4.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "ESP32-S3-WROOM-1-N4"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "default_tool": "esp-builtin",
     "onboard_tools": ["esp-builtin"],

boards/heltec_mesh_node_t114.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],

boards/heltec_vision_master_e290.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "heltec_vision_master_e290"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Vision Master E290",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/vision-master-e290/",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_t190.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "heltec_vision_master_t190"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Vision Master t190",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/vision-master-t190/",
+  "vendor": "Heltec"
+}

boards/lora_isp4520.json

@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52832_s132_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52832_XXAA -DNRF52",
-    "f_cpu": "64000000L",
-    "mcu": "nrf52832",
-    "variant": "lora_isp4520",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS132",
-      "sd_name": "s132",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B7"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "lora ISP4520",
-  "upload": {
-    "maximum_ram_size": 65536,
-    "maximum_size": 524288,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
-  },
-  "url": "",
-  "vendor": "PsiSoft"
-}

boards/me25ls01-4y10td.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DME25LS01_4Y10TD -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "ME25LS01-BOOT",
+    "mcu": "nrf52840",
+    "variant": "MINEWSEMI_ME25LS01",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Minesemi ME25LS01",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/lr1110-nrf52840-me25LS01l",
+  "vendor": "Minesemi"
+}

boards/ms24sf1.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DMS24SF1 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "MS24SF1-BOOT",
+    "mcu": "nrf52840",
+    "variant": "MINEWSEMI_MS24SF1_SX1262",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "MINEWSEMI_MS24SF1_SX1262",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/nrf52840-sx1262-ms24sf1",
+  "vendor": "Minesemi"
+}

boards/nordic_pca10059.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "extra_flags": "-DNORDIC_PCA10059 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/seeed-sensecap-indicator.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x1A86", "0x7523"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3r8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Studio SenseCAP Indicator",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",
+  "vendor": "Seeed Studio"
+}

boards/tlora-t3s3-v1.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "tlora-t3s3-v1"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/tracker-t1000-e.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "T1000-E-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_T1000-E",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed T1000-E",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/SenseCAP-Card-Tracker-T1000-E-for-Meshtastic-p-5913.html",
+  "vendor": "Seeed Studio"
+}

boards/wiscore_rak3172.json

@@ -1,5 +1,8 @@
 {
   "build": {
+    "arduino": {
+      "variant_h": "variant_RAK3172_MODULE.h"
+    },
     "core": "stm32",
     "cpu": "cortex-m4",
     "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",

extra_scripts/disable_adafruit_usb.py

@@ -5,16 +5,24 @@ Import("env")
 
 # NOTE: This is not currently used, but can serve as an example on how to write extra_scripts
 
-print("Current CLI targets", COMMAND_LINE_TARGETS)
-print("Current Build targets", BUILD_TARGETS)
-print("CPP defs", env.get("CPPDEFINES"))
+# print("Current CLI targets", COMMAND_LINE_TARGETS)
+# print("Current Build targets", BUILD_TARGETS)
+# print("CPP defs", env.get("CPPDEFINES"))
+# print(env.Dump())
 
 # Adafruit.py in the platformio build tree is a bit naive and always enables their USB stack for building.  We don't want this.
 # So come in after that python script has run and disable it.  This hack avoids us having to fork that big project and send in a PR
 # which might not be accepted. -@geeksville
 
-env["CPPDEFINES"].remove("USBCON")
-env["CPPDEFINES"].remove("USE_TINYUSB")
+lib_builders = env.get("__PIO_LIB_BUILDERS", None)
+if lib_builders is not None:
+    print("Disabling Adafruit USB stack")
+    for k in lib_builders:
+        if k.name == "Adafruit TinyUSB Library":
+            libenv = k.env
+            # print(f"{k.name }: { libenv.Dump() } ")
+            # libenv["CPPDEFINES"].remove("USBCON")
+            libenv["CPPDEFINES"].remove("USE_TINYUSB")
 
 # Custom actions when building program/firmware
 # env.AddPreAction("buildprog", callback...)

monitor/filter_c3_exception_decoder.py

@@ -18,10 +18,7 @@ import subprocess
 import sys
 
 from platformio.project.exception import PlatformioException
-from platformio.public import (
-    DeviceMonitorFilterBase,
-    load_build_metadata,
-)
+from platformio.public import DeviceMonitorFilterBase, load_build_metadata
 
 # By design, __init__ is called inside miniterm and we can't pass context to it.
 # pylint: disable=attribute-defined-outside-init
@@ -32,7 +29,7 @@ IS_WINDOWS = sys.platform.startswith("win")
 class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
     NAME = "esp32_c3_exception_decoder"
 
-    PCADDR_PATTERN = re.compile(r'0x4[0-9a-f]{7}', re.IGNORECASE)
+    PCADDR_PATTERN = re.compile(r"0x4[0-9a-f]{7}", re.IGNORECASE)
 
     def __call__(self):
         self.buffer = ""
@@ -75,14 +72,14 @@ See https://docs.platformio.org/page/projectconf/build_configurations.html
                         % self.__class__.__name__
                     )
                     return False
-                
+
             if not os.path.isfile(self.addr2line_path):
                 sys.stderr.write(
                     "%s: disabling, addr2line at %s does not exist\n"
                     % (self.__class__.__name__, self.addr2line_path)
                 )
                 return False
-                
+
             return True
         except PlatformioException as e:
             sys.stderr.write(
@@ -117,7 +114,7 @@ See https://docs.platformio.org/page/projectconf/build_configurations.html
 
                 trace = self.get_backtrace(m)
                 if len(trace) != "":
-                    text = text[: last] + trace + text[last :]
+                    text = text[:last] + trace + text[last:]
                     last += len(trace)
 
         return text
@@ -125,14 +122,10 @@ See https://docs.platformio.org/page/projectconf/build_configurations.html
     def get_backtrace(self, match):
         trace = "\n"
         enc = "mbcs" if IS_WINDOWS else "utf-8"
-        args = [self.addr2line_path, u"-fipC", u"-e", self.firmware_path]
+        args = [self.addr2line_path, "-fipC", "-e", self.firmware_path]
         try:
             addr = match.group()
-            output = (
-                subprocess.check_output(args + [addr])
-                .decode(enc)
-                .strip()
-            )
+            output = subprocess.check_output(args + [addr]).decode(enc).strip()
             output = output.replace(
                 "\n", "\n     "
             )  # newlines happen with inlined methods

platformio.ini

@@ -34,6 +34,7 @@ default_envs = tbeam
 ;default_envs = wio-e5
 ;default_envs = radiomaster_900_bandit_nano
 ;default_envs = radiomaster_900_bandit_micro
+;default_envs = radiomaster_900_bandit
 ;default_envs = heltec_capsule_sensor_v3
 ;default_envs = heltec_vision_master_t190
 ;default_envs = heltec_vision_master_e213
@@ -45,6 +46,7 @@ extra_configs =
   variants/*/platformio.ini
 
 [env]
+test_build_src = true
 extra_scripts = bin/platformio-custom.py
 
 ; note: we add src to our include search path so that lmic_project_config can override
@@ -79,14 +81,16 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_APRS
   -DRADIOLIB_EXCLUDE_LORAWAN
   -DMESHTASTIC_EXCLUDE_DROPZONE=1
+  -DBUILD_EPOCH=$UNIX_TIME
+  ;-D OLED_PL
 
 monitor_speed = 115200
 monitor_filters = direct
 
 lib_deps =
-  jgromes/RadioLib@~6.6.0
+  jgromes/RadioLib@~7.0.0
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306
-  mathertel/OneButton@^2.5.0 ; OneButton library for non-blocking button debounce
+  https://github.com/mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
   https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
   https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
@@ -128,6 +132,7 @@ lib_deps =
   adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BMP085 Library@^1.2.4
   adafruit/Adafruit BME280 Library@^2.2.2
+  adafruit/Adafruit BMP3XX Library@^2.1.5
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
@@ -151,8 +156,9 @@ lib_deps =
   https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
   boschsensortec/BME68x Sensor Library@^1.1.40407
   https://github.com/KodinLanewave/INA3221@^1.0.0
-  lewisxhe/SensorLib@^0.2.0
+  lewisxhe/SensorLib@0.2.0
   mprograms/QMC5883LCompass@^1.2.0
   
 
-  https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee
+  https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee
+  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1

src/AccelerometerThread.h

@@ -11,6 +11,9 @@
 #include <Adafruit_LIS3DH.h>
 #include <Adafruit_LSM6DS3TRC.h>
 #include <Adafruit_MPU6050.h>
+#ifdef STK8XXX_INT
+#include <stk8baxx.h>
+#endif
 #include <Arduino.h>
 #include <SensorBMA423.hpp>
 #include <Wire.h>
@@ -24,6 +27,8 @@
 #define ACCELEROMETER_CHECK_INTERVAL_MS 100
 #define ACCELEROMETER_CLICK_THRESHOLD 40
 
+volatile static bool STK_IRQ;
+
 static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
 {
     Wire.beginTransmission(address);
@@ -79,6 +84,11 @@ class AccelerometerThread : public concurrency::OSThread
 
         if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
             wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::STK8BAXX && STK_IRQ) {
+            STK_IRQ = false;
+            if (config.display.wake_on_tap_or_motion) {
+                wakeScreen();
+            }
         } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
             uint8_t click = lis.getClick();
             if (!config.device.double_tap_as_button_press) {
@@ -188,6 +198,15 @@ class AccelerometerThread : public concurrency::OSThread
             mpu.setMotionDetectionDuration(20);
             mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
             mpu.setInterruptPinPolarity(true);
+#ifdef STK8XXX_INT
+        } else if (acceleremoter_type == ScanI2C::DeviceType::STK8BAXX && stk8baxx.STK8xxx_Initialization(STK8xxx_VAL_RANGE_2G)) {
+            STK_IRQ = false;
+            LOG_DEBUG("STX8BAxx initialized\n");
+            stk8baxx.STK8xxx_Anymotion_init();
+            pinMode(STK8XXX_INT, INPUT_PULLUP);
+            attachInterrupt(
+                digitalPinToInterrupt(STK8XXX_INT), [] { STK_IRQ = true; }, RISING);
+#endif
         } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
             LOG_DEBUG("LIS3DH initializing\n");
             lis.setRange(LIS3DH_RANGE_2_G);
@@ -262,6 +281,9 @@ class AccelerometerThread : public concurrency::OSThread
     ScanI2C::DeviceType acceleremoter_type;
     Adafruit_MPU6050 mpu;
     Adafruit_LIS3DH lis;
+#ifdef STK8XXX_INT
+    STK8xxx stk8baxx;
+#endif
     Adafruit_LSM6DS3TRC lsm;
     SensorBMA423 bmaSensor;
     bool BMA_IRQ = false;

src/AmbientLightingThread.h

@@ -1,3 +1,4 @@
+#include "Observer.h"
 #include "configuration.h"
 
 #ifdef HAS_NCP5623
@@ -22,10 +23,18 @@ class AmbientLightingThread : public concurrency::OSThread
   public:
     explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
     {
+        notifyDeepSleepObserver.observe(&notifyDeepSleep); // Let us know when shutdown() is issued.
+
+// Enables Ambient Lighting by default if conditions are meet.
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef ENABLE_AMBIENTLIGHTING
+        moduleConfig.ambient_lighting.led_state = true;
+#endif
+#endif
         // Uncomment to test module
         // moduleConfig.ambient_lighting.led_state = true;
         // moduleConfig.ambient_lighting.current = 10;
-        // // Default to a color based on our node number
+        // Default to a color based on our node number
         // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
         // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
         // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
@@ -82,9 +91,46 @@ class AmbientLightingThread : public concurrency::OSThread
         return disable();
     }
 
+    // When shutdown() is issued, setLightingOff will be called.
+    CallbackObserver<AmbientLightingThread, void *> notifyDeepSleepObserver =
+        CallbackObserver<AmbientLightingThread, void *>(this, &AmbientLightingThread::setLightingOff);
+
   private:
     ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
 
+    // Turn RGB lighting off, is used in junction to shutdown()
+    int setLightingOff(void *unused)
+    {
+#ifdef HAS_NCP5623
+        rgb.setCurrent(0);
+        rgb.setRed(0);
+        rgb.setGreen(0);
+        rgb.setBlue(0);
+        LOG_INFO("Turn Off NCP5623 Ambient lighting.\n");
+#endif
+#ifdef HAS_NEOPIXEL
+        pixels.clear();
+        pixels.show();
+        LOG_INFO("Turn Off NeoPixel Ambient lighting.\n");
+#endif
+#ifdef RGBLED_CA
+        analogWrite(RGBLED_RED, 255 - 0);
+        analogWrite(RGBLED_GREEN, 255 - 0);
+        analogWrite(RGBLED_BLUE, 255 - 0);
+        LOG_INFO("Turn Off Ambient lighting RGB Common Anode.\n");
+#elif defined(RGBLED_RED)
+        analogWrite(RGBLED_RED, 0);
+        analogWrite(RGBLED_GREEN, 0);
+        analogWrite(RGBLED_BLUE, 0);
+        LOG_INFO("Turn Off Ambient lighting RGB Common Cathode.\n");
+#endif
+#ifdef UNPHONE
+        unphone.rgb(0, 0, 0);
+        LOG_INFO("Turn Off unPhone Ambient lighting.\n");
+#endif
+        return 0;
+    }
+
     void setLighting()
     {
 #ifdef HAS_NCP5623
@@ -100,6 +146,17 @@ class AmbientLightingThread : public concurrency::OSThread
         pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                                  moduleConfig.ambient_lighting.blue),
                     0, NEOPIXEL_COUNT);
+
+// RadioMaster Bandit has addressable LED at the two buttons
+// this allow us to set different lighting for them in variant.h file.
+#ifdef RADIOMASTER_900_BANDIT
+#if defined(BUTTON1_COLOR) && defined(BUTTON1_COLOR_INDEX)
+        pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
+#endif
+#if defined(BUTTON2_COLOR) && defined(BUTTON2_COLOR_INDEX)
+        pixels.fill(BUTTON2_COLOR, BUTTON1_COLOR_INDEX, 1);
+#endif
+#endif
         pixels.show();
         LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,

src/ButtonThread.cpp

@@ -29,7 +29,6 @@ volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BU
 #if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
 OneButton ButtonThread::userButton; // Get reference to static member
 #endif
-
 ButtonThread::ButtonThread() : OSThread("Button")
 {
 #if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
@@ -43,7 +42,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
     int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
 #if defined(HELTEC_CAPSULE_SENSOR_V3)
     this->userButton = OneButton(pin, false, false);
-#elif defined(BUTTON_ACTIVE_LOW) // change by WayenWeng
+#elif defined(BUTTON_ACTIVE_LOW)
     this->userButton = OneButton(pin, BUTTON_ACTIVE_LOW, BUTTON_ACTIVE_PULLUP);
 #else
     this->userButton = OneButton(pin, true, true);
@@ -53,7 +52,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 
 #ifdef INPUT_PULLUP_SENSE
     // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-#ifdef BUTTON_SENSE_TYPE // change by WayenWeng
+#ifdef BUTTON_SENSE_TYPE
     pinMode(pin, BUTTON_SENSE_TYPE);
 #else
     pinMode(pin, INPUT_PULLUP_SENSE);
@@ -145,8 +144,8 @@ int32_t ButtonThread::runOnce()
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
             LOG_BUTTON("Double press!\n");
-            service.refreshLocalMeshNode();
-            auto sentPosition = service.trySendPosition(NODENUM_BROADCAST, true);
+            service->refreshLocalMeshNode();
+            auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
             if (screen) {
                 if (sentPosition)
                     screen->print("Sent ad-hoc position\n");
@@ -225,7 +224,6 @@ int32_t ButtonThread::runOnce()
         btnEvent = BUTTON_EVENT_NONE;
     }
 
-    runASAP = false;
     return 50;
 }
 

src/ButtonThread.h

@@ -13,7 +13,7 @@
 #endif
 
 #ifndef BUTTON_TOUCH_MS
-#define BUTTON_TOCH_MS 400
+#define BUTTON_TOUCH_MS 400
 #endif
 
 class ButtonThread : public concurrency::OSThread

src/DebugConfiguration.cpp

@@ -26,6 +26,20 @@ SOFTWARE.*/
 
 #include "DebugConfiguration.h"
 
+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
+/// A C wrapper for LOG_DEBUG that can be used from arduino C libs that don't know about C++ or meshtastic
+extern "C" void logLegacy(const char *level, const char *fmt, ...)
+{
+    va_list args;
+    va_start(args, fmt);
+    if (console)
+        console->vprintf(level, fmt, args);
+    va_end(args);
+}
+
 #if HAS_NETWORKING
 
 Syslog::Syslog(UDP &client)
@@ -83,12 +97,14 @@ Syslog &Syslog::logMask(uint8_t priMask)
 
 void Syslog::enable()
 {
+    this->_client->begin(this->_port);
     this->_enabled = true;
 }
 
 void Syslog::disable()
 {
     this->_enabled = false;
+    this->_client->stop();
 }
 
 bool Syslog::isEnabled()
@@ -129,6 +145,11 @@ bool Syslog::vlogf(uint16_t pri, const char *appName, const char *fmt, va_list a
 inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *message)
 {
     int result;
+#ifdef ARCH_PORTDUINO
+    bool utf = !settingsMap[ascii_logs];
+#else
+    bool utf = true;
+#endif
 
     if (!this->_enabled)
         return false;
@@ -159,7 +180,12 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     this->_client->print(this->_deviceHostname);
     this->_client->print(' ');
     this->_client->print(appName);
-    this->_client->print(F(" - - - \xEF\xBB\xBF"));
+    this->_client->print(F(" - - - "));
+    if (utf) {
+        this->_client->print(F("\xEF\xBB\xBF"));
+    } else {
+        this->_client->print(F(" "));
+    }
     this->_client->print(F("["));
     this->_client->print(int(millis() / 1000));
     this->_client->print(F("]: "));

src/DebugConfiguration.h

@@ -3,8 +3,8 @@
 #include "configuration.h"
 
 // DEBUG LED
-#ifndef LED_INVERTED
-#define LED_INVERTED 0 // define as 1 if LED is active low (on)
+#ifndef LED_STATE_ON
+#define LED_STATE_ON 1
 #endif
 
 // -----------------------------------------------------------------------------
@@ -45,7 +45,7 @@
 #define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
-#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE) && !defined(PIO_UNIT_TESTING)
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)
@@ -62,6 +62,9 @@
 #endif
 #endif
 
+/// A C wrapper for LOG_DEBUG that can be used from arduino C libs that don't know about C++ or meshtastic
+extern "C" void logLegacy(const char *level, const char *fmt, ...);
+
 #define SYSLOG_NILVALUE "-"
 
 #define SYSLOG_CRIT 2  /* critical conditions */

src/DisplayFormatters.cpp

@@ -3,6 +3,9 @@
 const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
 {
     switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+        return useShortName ? "ShortT" : "ShortTurbo";
+        break;
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
         return useShortName ? "ShortS" : "ShortSlow";
         break;

src/FSCommon.cpp

@@ -24,6 +24,39 @@ SPIClass SPI1(HSPI);
 
 #endif // HAS_SDCARD
 
+#if defined(ARCH_STM32WL)
+
+uint16_t OSFS::startOfEEPROM = 1;
+uint16_t OSFS::endOfEEPROM = 2048;
+
+// 3) How do I read from the medium?
+void OSFS::readNBytes(uint16_t address, unsigned int num, byte *output)
+{
+    for (uint16_t i = address; i < address + num; i++) {
+        *output = EEPROM.read(i);
+        output++;
+    }
+}
+
+// 4) How to I write to the medium?
+void OSFS::writeNBytes(uint16_t address, unsigned int num, const byte *input)
+{
+    for (uint16_t i = address; i < address + num; i++) {
+        EEPROM.update(i, *input);
+        input++;
+    }
+}
+#endif
+
+bool lfs_assert_failed =
+    false; // Note: we use this global on all platforms, though it can only be set true on nrf52 (in our modified lfs_util.h)
+
+extern "C" void lfs_assert(const char *reason)
+{
+    LOG_ERROR("LFS assert: %s\n", reason);
+    lfs_assert_failed = true;
+}
+
 /**
  * @brief Copies a file from one location to another.
  *
@@ -33,7 +66,33 @@ SPIClass SPI1(HSPI);
  */
 bool copyFile(const char *from, const char *to)
 {
-#ifdef FSCom
+#ifdef ARCH_STM32WL
+    unsigned char cbuffer[2048];
+
+    // Var to hold the result of actions
+    OSFS::result r;
+
+    r = OSFS::getFile(from, cbuffer);
+
+    if (r == notfound) {
+        LOG_ERROR("Failed to open source file %s\n", from);
+        return false;
+    } else if (r == noerr) {
+        r = OSFS::newFile(to, cbuffer, true);
+        if (r == noerr) {
+            return true;
+        } else {
+            LOG_ERROR("OSFS Error %d\n", r);
+            return false;
+        }
+
+    } else {
+        LOG_ERROR("OSFS Error %d\n", r);
+        return false;
+    }
+    return true;
+
+#elif defined(FSCom)
     unsigned char cbuffer[16];
 
     File f1 = FSCom.open(from, FILE_O_READ);
@@ -70,7 +129,13 @@ bool copyFile(const char *from, const char *to)
  */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
-#ifdef FSCom
+#ifdef ARCH_STM32WL
+    if (copyFile(pathFrom, pathTo) && (OSFS::deleteFile(pathFrom) == OSFS::result::NO_ERROR)) {
+        return true;
+    } else {
+        return false;
+    }
+#elif defined(FSCom)
 #ifdef ARCH_ESP32
     // rename was fixed for ESP32 IDF LittleFS in April
     return FSCom.rename(pathFrom, pathTo);
@@ -143,7 +208,7 @@ std::vector<meshtastic_FileInfo> getFiles(const char *dirname, uint8_t levels)
  * @param levels The number of levels of subdirectories to list.
  * @param del Whether or not to delete the contents of the directory after listing.
  */
-void listDir(const char *dirname, uint8_t levels, bool del = false)
+void listDir(const char *dirname, uint8_t levels, bool del)
 {
 #ifdef FSCom
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
@@ -158,7 +223,9 @@ void listDir(const char *dirname, uint8_t levels, bool del = false)
     }
 
     File file = root.openNextFile();
-    while (file) {
+    while (
+        file &&
+        file.name()[0]) { // This file.name() check is a workaround for a bug in the Adafruit LittleFS nrf52 glue (see issue 4395)
         if (file.isDirectory() && !String(file.name()).endsWith(".")) {
             if (levels) {
 #ifdef ARCH_ESP32
@@ -182,6 +249,7 @@ void listDir(const char *dirname, uint8_t levels, bool del = false)
                     file.close();
                 }
 #else
+                LOG_DEBUG(" %s (directory)\n", file.name());
                 listDir(file.name(), levels - 1, del);
                 file.close();
 #endif
@@ -208,7 +276,7 @@ void listDir(const char *dirname, uint8_t levels, bool del = false)
                 file.close();
             }
 #else
-            LOG_DEBUG(" %s (%i Bytes)\n", file.name(), file.size());
+            LOG_DEBUG("   %s (%i Bytes)\n", file.name(), file.size());
             file.close();
 #endif
         }
@@ -257,62 +325,6 @@ void rmDir(const char *dirname)
 #endif
 }
 
-bool fsCheck()
-{
-#if defined(ARCH_NRF52)
-    size_t write_size = 0;
-    size_t read_size = 0;
-    char buf[32] = {0};
-
-    Adafruit_LittleFS_Namespace::File file(FSCom);
-    const char *text = "meshtastic fs test";
-    size_t text_length = strlen(text);
-    const char *filename = "/meshtastic.txt";
-
-    LOG_DEBUG("Try create file .\n");
-    if (file.open(filename, FILE_O_WRITE)) {
-        write_size = file.write(text);
-    } else {
-        LOG_DEBUG("Open file failed .\n");
-        goto FORMAT_FS;
-    }
-
-    if (write_size != text_length) {
-        LOG_DEBUG("Text bytes do not match .\n");
-        file.close();
-        goto FORMAT_FS;
-    }
-
-    file.close();
-
-    if (!file.open(filename, FILE_O_READ)) {
-        LOG_DEBUG("Open file failed .\n");
-        goto FORMAT_FS;
-    }
-
-    read_size = file.readBytes(buf, text_length);
-    if (read_size != text_length) {
-        LOG_DEBUG("Text bytes do not match .\n");
-        file.close();
-        goto FORMAT_FS;
-    }
-
-    if (memcmp(buf, text, text_length) != 0) {
-        LOG_DEBUG("The written bytes do not match the read bytes .\n");
-        file.close();
-        goto FORMAT_FS;
-    }
-    return true;
-FORMAT_FS:
-    LOG_DEBUG("Format FS ....\n");
-    FSCom.format();
-    FSCom.begin();
-    return false;
-#else
-    return true;
-#endif
-}
-
 void fsInit()
 {
 #ifdef FSCom
@@ -322,35 +334,6 @@ void fsInit()
     }
 #if defined(ARCH_ESP32)
     LOG_DEBUG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
-#elif defined(ARCH_NRF52)
-    /*
-     * nRF52840 has a certain chance of automatic formatting failure.
-     * Try to create a file after initializing the file system. If the creation fails,
-     * it means that the file system is not working properly. Please format it manually again.
-     * To check the normality of the file system, you need to disable the LFS_NO_ASSERT assertion.
-     * Otherwise, the assertion will be entered at the moment of reading or opening, and the FS will not be formatted.
-     * */
-    bool ret = false;
-    uint8_t retry = 3;
-
-    while (retry--) {
-        ret = fsCheck();
-        if (ret) {
-            LOG_DEBUG("File system check is OK.\n");
-            break;
-        }
-        delay(10);
-    }
-
-    // It may not be possible to reach this step.
-    // Add a loop here to prevent unpredictable situations from happening.
-    // Can add a screen to display error status later.
-    if (!ret) {
-        while (1) {
-            LOG_ERROR("The file system is damaged and cannot proceed to the next step.\n");
-            delay(1000);
-        }
-    }
 #else
     LOG_DEBUG("Filesystem files:\n");
 #endif

src/FSCommon.h

@@ -15,10 +15,13 @@
 #endif
 
 #if defined(ARCH_STM32WL)
-#include "platform/stm32wl/InternalFileSystem.h" // STM32WL version
-#define FSCom InternalFS
-#define FSBegin() FSCom.begin()
-using namespace LittleFS_Namespace;
+// STM32WL series 2 Kbytes (8 rows of 256 bytes)
+#include <EEPROM.h>
+#include <OSFS.h>
+
+// Useful consts
+const OSFS::result noerr = OSFS::result::NO_ERROR;
+const OSFS::result notfound = OSFS::result::FILE_NOT_FOUND;
 #endif
 
 #if defined(ARCH_RP2040)
@@ -48,9 +51,13 @@ using namespace Adafruit_LittleFS_Namespace;
 #endif
 
 void fsInit();
+void fsListFiles();
 bool copyFile(const char *from, const char *to);
 bool renameFile(const char *pathFrom, const char *pathTo);
 std::vector<meshtastic_FileInfo> getFiles(const char *dirname, uint8_t levels);
-void listDir(const char *dirname, uint8_t levels, bool del);
+void listDir(const char *dirname, uint8_t levels, bool del = false);
 void rmDir(const char *dirname);
-void setupSDCard();
+void setupSDCard();
+
+extern bool lfs_assert_failed; // Note: we use this global on all platforms, though it can only be set true on nrf52 (in our
+                               // modified lfs_util.h)

src/GpioLogic.cpp

@@ -0,0 +1,104 @@
+#include "GpioLogic.h"
+#include <assert.h>
+
+void GpioVirtPin::set(bool value)
+{
+    if (value != this->value) {
+        this->value = value ? PinState::On : PinState::Off;
+        if (dependentPin)
+            dependentPin->update();
+    }
+}
+
+void GpioHwPin::set(bool value)
+{
+    // if (num == 3) LOG_DEBUG("Setting pin %d to %d\n", num, value);
+    pinMode(num, OUTPUT);
+    digitalWrite(num, value);
+}
+
+GpioTransformer::GpioTransformer(GpioPin *outPin) : outPin(outPin) {}
+
+void GpioTransformer::set(bool value)
+{
+    outPin->set(value);
+}
+
+GpioUnaryTransformer::GpioUnaryTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioTransformer(outPin), inPin(inPin)
+{
+    assert(!inPin->dependentPin); // We only allow one dependent pin
+    inPin->dependentPin = this;
+
+    // Don't update at construction time, because various GpioPins might be global constructor based not yet initied because
+    // order of operations for global constructors is not defined.
+    // update();
+}
+
+/**
+ * Update the output pin based on the current state of the input pin.
+ */
+void GpioUnaryTransformer::update()
+{
+    auto p = inPin->get();
+    if (p == GpioVirtPin::PinState::Unset)
+        return; // Not yet fully initialized
+
+    set(p);
+}
+
+/**
+ * Update the output pin based on the current state of the input pin.
+ */
+void GpioNotTransformer::update()
+{
+    auto p = inPin->get();
+    if (p == GpioVirtPin::PinState::Unset)
+        return; // Not yet fully initialized
+
+    set(!p);
+}
+
+GpioBinaryTransformer::GpioBinaryTransformer(GpioVirtPin *inPin1, GpioVirtPin *inPin2, GpioPin *outPin, Operation operation)
+    : GpioTransformer(outPin), inPin1(inPin1), inPin2(inPin2), operation(operation)
+{
+    assert(!inPin1->dependentPin); // We only allow one dependent pin
+    inPin1->dependentPin = this;
+    assert(!inPin2->dependentPin); // We only allow one dependent pin
+    inPin2->dependentPin = this;
+
+    // Don't update at construction time, because various GpioPins might be global constructor based not yet initied because
+    // order of operations for global constructors is not defined.
+    // update();
+}
+
+void GpioBinaryTransformer::update()
+{
+    auto p1 = inPin1->get(), p2 = inPin2->get();
+    GpioVirtPin::PinState newValue = GpioVirtPin::PinState::Unset;
+
+    if (p1 == GpioVirtPin::PinState::Unset)
+        newValue = p2; // Not yet fully initialized
+    else if (p2 == GpioVirtPin::PinState::Unset)
+        newValue = p1; // Not yet fully initialized
+
+    // If we've already found our value just use it, otherwise need to do the operation
+    if (newValue == GpioVirtPin::PinState::Unset) {
+        switch (operation) {
+        case And:
+            newValue = (GpioVirtPin::PinState)(p1 && p2);
+            break;
+        case Or:
+            // LOG_DEBUG("Doing GPIO OR\n");
+            newValue = (GpioVirtPin::PinState)(p1 || p2);
+            break;
+        case Xor:
+            newValue = (GpioVirtPin::PinState)(p1 != p2);
+            break;
+        default:
+            assert(false);
+        }
+    }
+    set(newValue);
+}
+
+GpioSplitter::GpioSplitter(GpioPin *outPin1, GpioPin *outPin2) : outPin1(outPin1), outPin2(outPin2) {}

src/GpioLogic.h

@@ -0,0 +1,160 @@
+#pragma once
+
+#include "configuration.h"
+
+/**This is a set of classes to mediate access to GPIOs in a structured way.  Most usage of GPIOs do not
+    require these classes!  But if your hardware has a GPIO that is 'shared' between multiple devices (i.e. a shared power enable)
+    then using these classes might be able to let you cleanly turn on that enable when either dependent device is needed.
+
+    Note: these classes are intended to be 99% inline for the common case so should have minimal impact on flash or RAM
+   requirements.
+*/
+
+/**
+ * A logical GPIO pin (not necessary raw hardware).
+ */
+class GpioPin
+{
+  public:
+    virtual void set(bool value) = 0;
+};
+
+/**
+ * A physical GPIO hw pin.
+ */
+class GpioHwPin : public GpioPin
+{
+    uint32_t num;
+
+  public:
+    explicit GpioHwPin(uint32_t num) : num(num) {}
+
+    void set(bool value);
+};
+
+class GpioTransformer;
+class GpioNotTransformer;
+class GpioBinaryTransformer;
+
+/**
+ * A virtual GPIO pin.
+ */
+class GpioVirtPin : public GpioPin
+{
+    friend class GpioBinaryTransformer;
+    friend class GpioUnaryTransformer;
+
+  public:
+    enum PinState { On = true, Off = false, Unset = 2 };
+
+    void set(bool value);
+    PinState get() const { return value; }
+
+  private:
+    PinState value = PinState::Unset;
+    GpioTransformer *dependentPin = NULL;
+};
+
+#include <assert.h>
+
+/**
+ * A 'smart' trigger that can depend in a fake GPIO and if that GPIO changes, drive some other downstream GPIO to change.
+ * notably: the set method is not public (because it always is calculated by a subclass)
+ */
+class GpioTransformer
+{
+  public:
+    /**
+     * Update the output pin based on the current state of the input pin.
+     */
+    virtual void update() = 0;
+
+  protected:
+    GpioTransformer(GpioPin *outPin);
+
+    void set(bool value);
+
+  private:
+    GpioPin *outPin;
+};
+
+/**
+ * A transformer that just drives a hw pin based on a virtual pin.
+ */
+class GpioUnaryTransformer : public GpioTransformer
+{
+  public:
+    GpioUnaryTransformer(GpioVirtPin *inPin, GpioPin *outPin);
+
+  protected:
+    friend class GpioVirtPin;
+
+    /**
+     * Update the output pin based on the current state of the input pin.
+     */
+    virtual void update();
+
+    GpioVirtPin *inPin;
+};
+
+/**
+ * A transformer that performs a unary NOT operation from an input.
+ */
+class GpioNotTransformer : public GpioUnaryTransformer
+{
+  public:
+    GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioUnaryTransformer(inPin, outPin) {}
+
+  protected:
+    friend class GpioVirtPin;
+
+    /**
+     * Update the output pin based on the current state of the input pin.
+     */
+    void update();
+};
+
+/**
+ * A transformer that combines multiple virtual pins to drive an output pin
+ */
+class GpioBinaryTransformer : public GpioTransformer
+{
+
+  public:
+    enum Operation { And, Or, Xor };
+
+    GpioBinaryTransformer(GpioVirtPin *inPin1, GpioVirtPin *inPin2, GpioPin *outPin, Operation operation);
+
+  protected:
+    friend class GpioVirtPin;
+
+    /**
+     * Update the output pin based on the current state of the input pins.
+     */
+    void update();
+
+  private:
+    GpioVirtPin *inPin1;
+    GpioVirtPin *inPin2;
+    Operation operation;
+};
+
+/**
+ * Sometimes a single output GPIO single needs to drive multiple physical GPIOs.  This class provides that.
+ */
+class GpioSplitter : public GpioPin
+{
+
+  public:
+    GpioSplitter(GpioPin *outPin1, GpioPin *outPin2);
+
+    void set(bool value)
+    {
+        outPin1->set(value);
+        outPin2->set(value);
+    }
+
+  private:
+    GpioPin *outPin1;
+    GpioPin *outPin2;
+};

src/Led.cpp

@@ -0,0 +1,66 @@
+#include "Led.h"
+#include "PowerMon.h"
+#include "main.h"
+#include "power.h"
+
+GpioVirtPin ledForceOn, ledBlink;
+
+#if defined(LED_PIN)
+// Most boards have a GPIO for LED control
+static GpioHwPin ledRawHwPin(LED_PIN);
+#else
+static GpioVirtPin ledRawHwPin; // Dummy pin for no hardware
+#endif
+
+#if LED_STATE_ON == 0
+static GpioVirtPin ledHwPin;
+static GpioNotTransformer ledInverter(&ledHwPin, &ledRawHwPin);
+#else
+static GpioPin &ledHwPin = ledRawHwPin;
+#endif
+
+#if defined(HAS_PMU)
+/**
+ * A GPIO controlled by the PMU
+ */
+class GpioPmuPin : public GpioPin
+{
+  public:
+    void set(bool value)
+    {
+        if (pmu_found && PMU) {
+            // blink the axp led
+            PMU->setChargingLedMode(value ? XPOWERS_CHG_LED_ON : XPOWERS_CHG_LED_OFF);
+        }
+    }
+} ledPmuHwPin;
+
+// In some cases we need to drive a PMU LED and a normal LED
+static GpioSplitter ledFinalPin(&ledHwPin, &ledPmuHwPin);
+#else
+static GpioPin &ledFinalPin = ledHwPin;
+#endif
+
+#ifdef USE_POWERMON
+/**
+ * We monitor changes to the LED drive output because we use that as a sanity test in our power monitor stuff.
+ */
+class MonitoredLedPin : public GpioPin
+{
+  public:
+    void set(bool value)
+    {
+        if (powerMon) {
+            if (value)
+                powerMon->setState(meshtastic_PowerMon_State_LED_On);
+            else
+                powerMon->clearState(meshtastic_PowerMon_State_LED_On);
+        }
+        ledFinalPin.set(value);
+    }
+} monitoredLedPin;
+#else
+static GpioPin &monitoredLedPin = ledFinalPin;
+#endif
+
+static GpioBinaryTransformer ledForcer(&ledForceOn, &ledBlink, &monitoredLedPin, GpioBinaryTransformer::Or);

src/Led.h

@@ -0,0 +1,7 @@
+#include "GpioLogic.h"
+#include "configuration.h"
+
+/**
+ * ledForceOn and ledForceOff both override the normal ledBlinker behavior (which is controlled by main)
+ */
+extern GpioVirtPin ledForceOn, ledBlink;

src/OSTimer.cpp

@@ -1,60 +0,0 @@
-#include "OSTimer.h"
-#include "configuration.h"
-
-/**
- * Schedule a callback to run.  The callback must _not_ block, though it is called from regular thread level (not ISR)
- *
- * NOTE! xTimerPend... seems to ignore the time passed in on ESP32 and on NRF52
- * The reason this didn't work is because xTimerPednFunctCall really isn't a timer function at all - it just means run the
-callback
- * from the timer thread the next time you have spare cycles.
- *
- * @return true if successful, false if the timer fifo is too full.
-
-bool scheduleOSCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
-{
-    return xTimerPendFunctionCall(callback, param1, param2, pdMS_TO_TICKS(delayMsec));
-} */
-
-#ifdef ARCH_ESP32
-
-// Super skanky quick hack to use hardware timers of the ESP32
-static hw_timer_t *timer;
-static PendableFunction tCallback;
-static void *tParam1;
-static uint32_t tParam2;
-
-static void IRAM_ATTR onTimer()
-{
-    (*tCallback)(tParam1, tParam2);
-}
-
-/**
- * Schedules a hardware callback function to be executed after a specified delay.
- *
- * @param callback The function to be executed.
- * @param param1 The first parameter to be passed to the function.
- * @param param2 The second parameter to be passed to the function.
- * @param delayMsec The delay time in milliseconds before the function is executed.
- *
- * @return True if the function was successfully scheduled, false otherwise.
- */
-bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
-{
-    if (!timer) {
-        timer = timerBegin(0, 80, true); // one usec per tick (main clock is 80MhZ on ESP32)
-        assert(timer);
-        timerAttachInterrupt(timer, &onTimer, true);
-    }
-
-    tCallback = callback;
-    tParam1 = param1;
-    tParam2 = param2;
-
-    timerAlarmWrite(timer, delayMsec * 1000UL, false); // Do not reload, we want it to be a single shot timer
-    timerRestart(timer);
-    timerAlarmEnable(timer);
-    return true;
-}
-
-#endif

src/OSTimer.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include <Arduino.h>
-
-typedef void (*PendableFunction)(void *pvParameter1, uint32_t ulParameter2);
-
-/// Uses a hardware timer, but calls the handler in _interrupt_ context
-bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec);

src/Power.cpp

@@ -13,6 +13,7 @@
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
+#include "Throttle.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
@@ -30,6 +31,7 @@
 #if HAS_WIFI
 #include <WiFi.h>
 #endif
+
 #endif
 
 #ifndef DELAY_FOREVER
@@ -80,9 +82,6 @@ RAK9154Sensor rak9154Sensor;
 #endif
 
 #ifdef HAS_PMU
-#include "XPowersAXP192.tpp"
-#include "XPowersAXP2101.tpp"
-#include "XPowersLibInterface.hpp"
 XPowersLibInterface *PMU = NULL;
 #else
 
@@ -139,6 +138,30 @@ using namespace meshtastic;
  */
 static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level sensor
 
+static void adcEnable()
+{
+#ifdef ADC_CTRL // enable adc voltage divider when we need to read
+#ifdef ADC_USE_PULLUP
+    pinMode(ADC_CTRL, INPUT_PULLUP);
+#else
+    pinMode(ADC_CTRL, OUTPUT);
+    digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+#endif
+    delay(10);
+#endif
+}
+
+static void adcDisable()
+{
+#ifdef ADC_CTRL // disable adc voltage divider when we need to read
+#ifdef ADC_USE_PULLUP
+    pinMode(ADC_CTRL, INPUT_PULLDOWN);
+#else
+    digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
+#endif
+#endif
+}
+
 /**
  * A simple battery level sensor that assumes the battery voltage is attached via a voltage-divider to an analog input
  */
@@ -200,7 +223,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #endif
 
-#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
+    !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
             LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
             return getINAVoltage();
@@ -222,31 +246,25 @@ class AnalogBatteryLevel : public HasBatteryLevel
             config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER;
         // Do not call analogRead() often.
         const uint32_t min_read_interval = 5000;
-        if (millis() - last_read_time_ms > min_read_interval) {
+        if (!Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
             last_read_time_ms = millis();
 
             uint32_t raw = 0;
             float scaled = 0;
 
+            adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
             scaled *= operativeAdcMultiplier;
-#else           // block for all other platforms
-#ifdef ADC_CTRL // enable adc voltage divider when we need to read
-            pinMode(ADC_CTRL, OUTPUT);
-            digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
-            delay(10);
-#endif
+#else // block for all other platforms
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
-#ifdef ADC_CTRL // disable adc voltage divider when we need to read
-            digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
-#endif
 #endif
+            adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -277,11 +295,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         uint8_t raw_c = 0; // raw reading counter
 
 #ifndef BAT_MEASURE_ADC_UNIT // ADC1
-#ifdef ADC_CTRL              // enable adc voltage divider when we need to read
-        pinMode(ADC_CTRL, OUTPUT);
-        digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
-        delay(10);
-#endif
         for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
             int val_ = adc1_get_raw(adc_channel);
             if (val_ >= 0) { // save only valid readings
@@ -290,18 +303,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             }
             // delayMicroseconds(100);
         }
-#ifdef ADC_CTRL // disable adc voltage divider when we need to read
-        digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
-#endif
-#else // ADC2
-#ifdef ADC_CTRL
-#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
-        pinMode(ADC_CTRL, OUTPUT);
-        digitalWrite(ADC_CTRL, LOW); // ACTIVE LOW
-        delay(10);
-#endif
-#endif // End ADC_CTRL
-
+#else                            // ADC2
 #ifdef CONFIG_IDF_TARGET_ESP32S3 // ESP32S3
         // ADC2 wifi bug workaround not required, breaks compile
         // On ESP32S3, ADC2 can take turns with Wifi (?)
@@ -336,12 +338,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #endif // BAT_MEASURE_ADC_UNIT
 
-#ifdef ADC_CTRL
-#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
-        digitalWrite(ADC_CTRL, HIGH);
-#endif
-#endif // End ADC_CTRL
-
 #endif // End BAT_MEASURE_ADC_UNIT
         return (raw / (raw_c < 1 ? 1 : raw_c));
     }
@@ -420,7 +416,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     }
 #endif
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
     uint16_t getINAVoltage()
     {
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
@@ -460,7 +456,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 };
 
-AnalogBatteryLevel analogLevel;
+static AnalogBatteryLevel analogLevel;
 
 Power::Power() : OSThread("Power")
 {
@@ -559,6 +555,10 @@ bool Power::setup()
 {
     bool found = axpChipInit() || analogInit();
 
+#ifdef NRF_APM
+    found = true;
+#endif
+
     enabled = found;
     low_voltage_counter = 0;
 
@@ -588,10 +588,16 @@ void Power::shutdown()
 // TODO(girts): move this and other axp stuff to power.h/power.cpp.
 void Power::readPowerStatus()
 {
+    int32_t batteryVoltageMv = -1; // Assume unknown
+    int8_t batteryChargePercent = -1;
+    OptionalBool usbPowered = OptUnknown;
+    OptionalBool hasBattery = OptUnknown; // These must be static because NRF_APM code doesn't run every time
+    OptionalBool isCharging = OptUnknown;
+
     if (batteryLevel) {
-        bool hasBattery = batteryLevel->isBatteryConnect();
-        uint32_t batteryVoltageMv = 0;
-        int8_t batteryChargePercent = 0;
+        hasBattery = batteryLevel->isBatteryConnect() ? OptTrue : OptFalse;
+        usbPowered = batteryLevel->isVbusIn() ? OptTrue : OptFalse;
+        isCharging = batteryLevel->isCharging() ? OptTrue : OptFalse;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
             // If the AXP192 returns a valid battery percentage, use it
@@ -606,102 +612,90 @@ void Power::readPowerStatus()
                                              0, 100);
             }
         }
+    }
 
-        OptionalBool NRF_USB = OptFalse;
-
+// FIXME: IMO we shouldn't be littering our code with all these ifdefs.  Way better instead to make a Nrf52IsUsbPowered subclass
+// (which shares a superclass with the BatteryLevel stuff)
+// that just provides a few methods.  But in the interest of fixing this bug I'm going to follow current
+// practice.
 #ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
                // changes.
 
-        static nrfx_power_usb_state_t prev_nrf_usb_state = (nrfx_power_usb_state_t)-1; // -1 so that state detected at boot
-        nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+    nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+    // LOG_DEBUG("NRF Power %d\n", nrf_usb_state);
 
-        // If state changed
-        if (nrf_usb_state != prev_nrf_usb_state) {
-            // If changed to DISCONNECTED
-            if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
-                powerFSM.trigger(EVENT_POWER_DISCONNECTED);
-                NRF_USB = OptFalse;
-            }
-            // If changed to CONNECTED / READY
-            else {
-                powerFSM.trigger(EVENT_POWER_CONNECTED);
-                NRF_USB = OptTrue;
-            }
+    // If changed to DISCONNECTED
+    if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED)
+        isCharging = usbPowered = OptFalse;
+    // If changed to CONNECTED / READY
+    else
+        isCharging = usbPowered = OptTrue;
 
-            // Cache the current state
-            prev_nrf_usb_state = nrf_usb_state;
-        }
 #endif
-        // Notify any status instances that are observing us
-        const PowerStatus powerStatus2 = PowerStatus(
-            hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() || NRF_USB == OptTrue ? OptTrue : OptFalse,
-            batteryLevel->isCharging() || NRF_USB == OptTrue ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
-        LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
-                  powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
-        newStatus.notifyObservers(&powerStatus2);
+
+    // Notify any status instances that are observing us
+    const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isCharging, batteryVoltageMv, batteryChargePercent);
+    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
+              powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+    newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
-        if (lastheap != memGet.getFreeHeap()) {
-            LOG_DEBUG("Threads running:");
-            int running = 0;
-            for (int i = 0; i < MAX_THREADS; i++) {
-                auto thread = concurrency::mainController.get(i);
-                if ((thread != nullptr) && (thread->enabled)) {
-                    LOG_DEBUG(" %s", thread->ThreadName.c_str());
-                    running++;
-                }
+    if (lastheap != memGet.getFreeHeap()) {
+        LOG_DEBUG("Threads running:");
+        int running = 0;
+        for (int i = 0; i < MAX_THREADS; i++) {
+            auto thread = concurrency::mainController.get(i);
+            if ((thread != nullptr) && (thread->enabled)) {
+                LOG_DEBUG(" %s", thread->ThreadName.c_str());
+                running++;
             }
-            LOG_DEBUG("\n");
-            LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
-                      memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
-            lastheap = memGet.getFreeHeap();
         }
+        LOG_DEBUG("\n");
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
+                  memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
+        lastheap = memGet.getFreeHeap();
+    }
 #ifdef DEBUG_HEAP_MQTT
-        if (mqtt) {
-            // send MQTT-Packet with Heap-Size
-            uint8_t dmac[6];
-            getMacAddr(dmac); // Get our hardware ID
-            char mac[18];
-            sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
+    if (mqtt) {
+        // send MQTT-Packet with Heap-Size
+        uint8_t dmac[6];
+        getMacAddr(dmac); // Get our hardware ID
+        char mac[18];
+        sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
-            auto newHeap = memGet.getFreeHeap();
-            std::string heapTopic =
-                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
-            std::string heapString = std::to_string(newHeap);
-            mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
-            auto wifiRSSI = WiFi.RSSI();
-            std::string wifiTopic =
-                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
-            std::string wifiString = std::to_string(wifiRSSI);
-            mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
-        }
+        auto newHeap = memGet.getFreeHeap();
+        std::string heapTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+        std::string heapString = std::to_string(newHeap);
+        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
+        auto wifiRSSI = WiFi.RSSI();
+        std::string wifiTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+        std::string wifiString = std::to_string(wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
+    }
 #endif
 
 #endif
 
-        // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
-        // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
-        //
-        if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
-            if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
-                low_voltage_counter++;
-                LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
-                if (low_voltage_counter > 10) {
+    // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
+    // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
+    //
+    if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
+        if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
+            low_voltage_counter++;
+            LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
+            if (low_voltage_counter > 10) {
 #ifdef ARCH_NRF52
-                    // We can't trigger deep sleep on NRF52, it's freezing the board
-                    LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
+                // We can't trigger deep sleep on NRF52, it's freezing the board
+                LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
 #else
-                    LOG_INFO("Low voltage detected, triggering deep sleep\n");
-                    powerFSM.trigger(EVENT_LOW_BATTERY);
+                LOG_INFO("Low voltage detected, triggering deep sleep\n");
+                powerFSM.trigger(EVENT_LOW_BATTERY);
 #endif
-                }
-            } else {
-                low_voltage_counter = 0;
             }
+        } else {
+            low_voltage_counter = 0;
         }
-    } else {
-        // No power sensing on this board - tell everyone else we have no idea what is happening
-        const PowerStatus powerStatus3 = PowerStatus(OptUnknown, OptUnknown, OptUnknown, -1, -1);
-        newStatus.notifyObservers(&powerStatus3);
     }
 }
 
@@ -1050,4 +1044,4 @@ bool Power::axpChipInit()
 #else
     return false;
 #endif
-}
+}

src/PowerFSM.cpp

@@ -9,6 +9,7 @@
  */
 #include "PowerFSM.h"
 #include "Default.h"
+#include "Led.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "PowerMon.h"
@@ -21,12 +22,15 @@
 #ifndef SLEEP_TIME
 #define SLEEP_TIME 30
 #endif
-
+#if EXCLUDE_POWER_FSM
+FakeFsm powerFSM;
+void PowerFSM_setup(){};
+#else
 /// Should we behave as if we have AC power now?
 static bool isPowered()
 {
 // Circumvent the battery sensing logic and assumes constant power if no battery pin or power mgmt IC
-#if !defined(BATTERY_PIN) && !defined(HAS_AXP192) && !defined(HAS_AXP2101)
+#if !defined(BATTERY_PIN) && !defined(HAS_AXP192) && !defined(HAS_AXP2101) && !defined(NRF_APM)
     return true;
 #endif
 
@@ -50,7 +54,6 @@ static bool isPowered()
 static void sdsEnter()
 {
     LOG_DEBUG("Enter state: SDS\n");
-    powerMon->setState(meshtastic_PowerMon_State_CPU_DeepSleep);
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
@@ -70,7 +73,6 @@ static uint32_t secsSlept;
 static void lsEnter()
 {
     LOG_INFO("lsEnter begin, ls_secs=%u\n", config.power.ls_secs);
-    powerMon->clearState(meshtastic_PowerMon_State_Screen_On);
     screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
@@ -91,7 +93,7 @@ static void lsIdle()
             uint32_t sleepTime = SLEEP_TIME;
 
             powerMon->setState(meshtastic_PowerMon_State_CPU_LightSleep);
-            setLed(false); // Never leave led on while in light sleep
+            ledBlink.set(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
             powerMon->clearState(meshtastic_PowerMon_State_CPU_LightSleep);
 
@@ -99,7 +101,7 @@ static void lsIdle()
             case ESP_SLEEP_WAKEUP_TIMER:
                 // Normal case: timer expired, we should just go back to sleep ASAP
 
-                setLed(true);                   // briefly turn on led
+                ledBlink.set(true);             // briefly turn on led
                 wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
@@ -134,7 +136,7 @@ static void lsIdle()
         }
     } else {
         // Time to stop sleeping!
-        setLed(false);
+        ledBlink.set(false);
         LOG_INFO("Reached ls_secs, servicing loop()\n");
         powerFSM.trigger(EVENT_WAKE_TIMER);
     }
@@ -149,7 +151,6 @@ static void lsExit()
 static void nbEnter()
 {
     LOG_DEBUG("Enter state: NB\n");
-    powerMon->clearState(meshtastic_PowerMon_State_BT_On);
     screen->setOn(false);
 #ifdef ARCH_ESP32
     // Only ESP32 should turn off bluetooth
@@ -161,8 +162,6 @@ static void nbEnter()
 
 static void darkEnter()
 {
-    powerMon->clearState(meshtastic_PowerMon_State_BT_On);
-    powerMon->clearState(meshtastic_PowerMon_State_Screen_On);
     setBluetoothEnable(true);
     screen->setOn(false);
 }
@@ -170,8 +169,6 @@ static void darkEnter()
 static void serialEnter()
 {
     LOG_DEBUG("Enter state: SERIAL\n");
-    powerMon->clearState(meshtastic_PowerMon_State_BT_On);
-    powerMon->setState(meshtastic_PowerMon_State_Screen_On);
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -180,7 +177,6 @@ static void serialEnter()
 static void serialExit()
 {
     // Turn bluetooth back on when we leave serial stream API
-    powerMon->setState(meshtastic_PowerMon_State_BT_On);
     setBluetoothEnable(true);
     screen->print("Serial disconnected\n");
 }
@@ -193,8 +189,6 @@ static void powerEnter()
         LOG_INFO("Loss of power in Powered\n");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     } else {
-        powerMon->setState(meshtastic_PowerMon_State_BT_On);
-        powerMon->setState(meshtastic_PowerMon_State_Screen_On);
         screen->setOn(true);
         setBluetoothEnable(true);
         // within enter() the function getState() returns the state we came from
@@ -218,8 +212,6 @@ static void powerIdle()
 
 static void powerExit()
 {
-    powerMon->setState(meshtastic_PowerMon_State_BT_On);
-    powerMon->setState(meshtastic_PowerMon_State_Screen_On);
     screen->setOn(true);
     setBluetoothEnable(true);
 
@@ -231,8 +223,6 @@ static void powerExit()
 static void onEnter()
 {
     LOG_DEBUG("Enter state: ON\n");
-    powerMon->setState(meshtastic_PowerMon_State_BT_On);
-    powerMon->setState(meshtastic_PowerMon_State_Screen_On);
     screen->setOn(true);
     setBluetoothEnable(true);
 }
@@ -408,4 +398,5 @@ void PowerFSM_setup()
 #endif
 
     powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
-}
+}
+#endif

src/PowerFSM.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#include <Fsm.h>
+#include "configuration.h"
 
 // See sw-design.md for documentation
 
@@ -22,7 +22,30 @@
 #define EVENT_SHUTDOWN 16        // force a full shutdown now (not just sleep)
 #define EVENT_INPUT 17           // input broker wants something, we need to wake up and enable screen
 
+#if EXCLUDE_POWER_FSM
+class FakeFsm
+{
+  public:
+    void trigger(int event)
+    {
+        if (event == EVENT_SERIAL_CONNECTED) {
+            serialConnected = true;
+        } else if (event == EVENT_SERIAL_DISCONNECTED) {
+            serialConnected = false;
+        }
+    };
+    bool getState() { return serialConnected; };
+
+  private:
+    bool serialConnected = false;
+};
+extern FakeFsm powerFSM;
+void PowerFSM_setup();
+
+#else
+#include <Fsm.h>
 extern Fsm powerFSM;
 extern State stateON, statePOWER, stateSERIAL, stateDARK;
 
 void PowerFSM_setup();
+#endif

src/PowerFSMThread.h

@@ -18,6 +18,7 @@ class PowerFSMThread : public OSThread
   protected:
     int32_t runOnce() override
     {
+#if !EXCLUDE_POWER_FSM
         powerFSM.run_machine();
 
         /// If we are in power state we force the CPU to wake every 10ms to check for serial characters (we don't yet wake
@@ -35,6 +36,9 @@ class PowerFSMThread : public OSThread
         }
 
         return 100;
+#else
+        return INT32_MAX;
+#endif
     }
 };
 

src/PowerMon.cpp

@@ -2,9 +2,11 @@
 #include "NodeDB.h"
 
 // Use the 'live' config flag to figure out if we should be showing this message
-static bool is_power_enabled(uint64_t m)
+bool PowerMon::is_power_enabled(uint64_t m)
 {
-    return (m & config.power.powermon_enables) ? true : false;
+    // FIXME: VERY STRANGE BUG: if I or in "force_enabled || " the flashed image on a rak4631 is not accepted by the bootloader as
+    // valid!!!  Possibly a linker/gcc/bootloader bug somewhere?
+    return ((m & config.power.powermon_enables) ? true : false);
 }
 
 void PowerMon::setState(_meshtastic_PowerMon_State state, const char *reason)

src/PowerMon.h

@@ -17,6 +17,13 @@ class PowerMon
 {
     uint64_t states = 0UL;
 
+    friend class PowerStressModule;
+
+    /**
+     * If stress testing we always want all events logged
+     */
+    bool force_enabled = false;
+
   public:
     PowerMon() {}
 
@@ -27,6 +34,9 @@ class PowerMon
   private:
     // Emit the coded log message
     void emitLog(const char *reason);
+
+    // Use the 'live' config flag to figure out if we should be showing this message
+    bool is_power_enabled(uint64_t m);
 };
 
 extern PowerMon *powerMon;

src/RF95Configuration.h

@@ -3,5 +3,4 @@
 #define RF95_RESET LORA_RESET
 #define RF95_IRQ LORA_DIO0  // on SX1262 version this is a no connect DIO0
 #define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95, but used for pure SX127x
-#define RF95_DIO2 LORA_DIO2 // Note: not really used for RF95
-#endif
+#endif

src/RedirectablePrint.cpp

@@ -38,8 +38,9 @@ size_t RedirectablePrint::write(uint8_t c)
 #ifdef USE_SEGGER
     SEGGER_RTT_PutChar(SEGGER_STDOUT_CH, c);
 #endif
-
-    if (!config.has_lora || config.device.serial_enabled)
+    // Account for legacy config transition
+    bool serialEnabled = config.has_security ? config.security.serial_enabled : config.device.serial_enabled;
+    if (!config.has_lora || serialEnabled)
         dest->write(c);
 
     return 1; // We always claim one was written, rather than trusting what the
@@ -49,7 +50,17 @@ size_t RedirectablePrint::write(uint8_t c)
 size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_list arg)
 {
     va_list copy;
+#if ENABLE_JSON_LOGGING || ARCH_PORTDUINO
+    static char printBuf[512];
+#else
     static char printBuf[160];
+#endif
+
+#ifdef ARCH_PORTDUINO
+    bool color = !settingsMap[ascii_logs];
+#else
+    bool color = true;
+#endif
 
     va_copy(copy, arg);
     size_t len = vsnprintf(printBuf, sizeof(printBuf), format, copy);
@@ -66,7 +77,7 @@ size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_l
         if (!std::isprint(static_cast<unsigned char>(printBuf[f])) && printBuf[f] != '\n')
             printBuf[f] = '#';
     }
-    if (logLevel != nullptr) {
+    if (color && logLevel != nullptr) {
         if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
             Print::write("\u001b[34m", 6);
         if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
@@ -77,7 +88,9 @@ size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_l
             Print::write("\u001b[31m", 6);
     }
     len = Print::write(printBuf, len);
-    Print::write("\u001b[0m", 5);
+    if (color && logLevel != nullptr) {
+        Print::write("\u001b[0m", 5);
+    }
     return len;
 }
 
@@ -87,17 +100,27 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
 
     // Cope with 0 len format strings, but look for new line terminator
     bool hasNewline = *format && format[strlen(format) - 1] == '\n';
+#ifdef ARCH_PORTDUINO
+    bool color = !settingsMap[ascii_logs];
+#else
+    bool color = true;
+#endif
 
     // If we are the first message on a report, include the header
     if (!isContinuationMessage) {
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
-            Print::write("\u001b[34m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
-            Print::write("\u001b[32m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
-            Print::write("\u001b[33m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_ERROR) == 0)
-            Print::write("\u001b[31m", 6);
+        if (color) {
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
+                Print::write("\u001b[34m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
+                Print::write("\u001b[32m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
+                Print::write("\u001b[33m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_ERROR) == 0)
+                Print::write("\u001b[31m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0)
+                Print::write("\u001b[35m", 6);
+        }
+
         uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // display local time on logfile
         if (rtc_sec > 0) {
             long hms = rtc_sec % SEC_PER_DAY;
@@ -111,17 +134,33 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
             int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
             int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
 #ifdef ARCH_PORTDUINO
-            ::printf("%s \u001b[0m| %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+            ::printf("%s ", logLevel);
+            if (color) {
+                ::printf("\u001b[0m");
+            }
+            ::printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
 #else
-            printf("%s \u001b[0m| %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+            printf("%s ", logLevel);
+            if (color) {
+                printf("\u001b[0m");
+            }
+            printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
 #endif
-        } else
+        } else {
 #ifdef ARCH_PORTDUINO
-            ::printf("%s \u001b[0m| ??:??:?? %u ", logLevel, millis() / 1000);
+            ::printf("%s ", logLevel);
+            if (color) {
+                ::printf("\u001b[0m");
+            }
+            ::printf("| ??:??:?? %u ", millis() / 1000);
 #else
-            printf("%s \u001b[0m| ??:??:?? %u ", logLevel, millis() / 1000);
+            printf("%s ", logLevel);
+            if (color) {
+                printf("\u001b[0m");
+            }
+            printf("| ??:??:?? %u ", millis() / 1000);
 #endif
-
+        }
         auto thread = concurrency::OSThread::currentThread;
         if (thread) {
             print("[");
@@ -174,7 +213,7 @@ void RedirectablePrint::log_to_syslog(const char *logLevel, const char *format,
 void RedirectablePrint::log_to_ble(const char *logLevel, const char *format, va_list arg)
 {
 #if !MESHTASTIC_EXCLUDE_BLUETOOTH
-    if (config.bluetooth.device_logging_enabled && !pauseBluetoothLogging) {
+    if (config.security.debug_log_api_enabled && !pauseBluetoothLogging) {
         bool isBleConnected = false;
 #ifdef ARCH_ESP32
         isBleConnected = nimbleBluetooth && nimbleBluetooth->isActive() && nimbleBluetooth->isConnected();
@@ -244,7 +283,21 @@ meshtastic_LogRecord_Level RedirectablePrint::getLogLevel(const char *logLevel)
 
 void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
-#ifdef ARCH_PORTDUINO
+#if ARCH_PORTDUINO
+    // level trace is special, two possible ways to handle it.
+    if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
+        if (settingsStrings[traceFilename] != "") {
+            va_list arg;
+            va_start(arg, format);
+            try {
+                traceFile << va_arg(arg, char *) << std::endl;
+            } catch (const std::ios_base::failure &e) {
+            }
+            va_end(arg);
+        }
+        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0)
+            return;
+    }
     if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
         return;
     else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
@@ -330,4 +383,4 @@ std::string RedirectablePrint::mt_sprintf(const std::string fmt_str, ...)
             break;
     }
     return std::string(formatted.get());
-}
+}

src/SafeFile.cpp

@@ -0,0 +1,105 @@
+#include "SafeFile.h"
+
+#ifdef FSCom
+
+// Only way to work on both esp32 and nrf52
+static File openFile(const char *filename, bool fullAtomic)
+{
+    if (!fullAtomic)
+        FSCom.remove(filename); // Nuke the old file to make space (ignore if it !exists)
+
+    String filenameTmp = filename;
+    filenameTmp += ".tmp";
+
+    // clear any previous LFS errors
+    lfs_assert_failed = false;
+
+    return FSCom.open(filenameTmp.c_str(), FILE_O_WRITE);
+}
+
+SafeFile::SafeFile(const char *_filename, bool fullAtomic)
+    : filename(_filename), f(openFile(_filename, fullAtomic)), fullAtomic(fullAtomic)
+{
+}
+
+size_t SafeFile::write(uint8_t ch)
+{
+    if (!f)
+        return 0;
+
+    hash ^= ch;
+    return f.write(ch);
+}
+
+size_t SafeFile::write(const uint8_t *buffer, size_t size)
+{
+    if (!f)
+        return 0;
+
+    for (size_t i = 0; i < size; i++) {
+        hash ^= buffer[i];
+    }
+    return f.write((uint8_t const *)buffer, size); // This nasty cast is _IMPORTANT_ otherwise the correct adafruit method does
+                                                   // not get used (they made a mistake in their typing)
+}
+
+/**
+ * Atomically close the file (deleting any old versions) and readback the contents to confirm the hash matches
+ *
+ * @return false for failure
+ */
+bool SafeFile::close()
+{
+    if (!f)
+        return false;
+
+    f.close();
+    if (!testReadback())
+        return false;
+
+    // brief window of risk here ;-)
+    if (fullAtomic && FSCom.exists(filename.c_str()) && !FSCom.remove(filename.c_str())) {
+        LOG_ERROR("Can't remove old pref file\n");
+        return false;
+    }
+
+    String filenameTmp = filename;
+    filenameTmp += ".tmp";
+    if (!renameFile(filenameTmp.c_str(), filename.c_str())) {
+        LOG_ERROR("Error: can't rename new pref file\n");
+        return false;
+    }
+
+    return true;
+}
+
+/// Read our (closed) tempfile back in and compare the hash
+bool SafeFile::testReadback()
+{
+    bool lfs_failed = lfs_assert_failed;
+    lfs_assert_failed = false;
+
+    String filenameTmp = filename;
+    filenameTmp += ".tmp";
+    auto f2 = FSCom.open(filenameTmp.c_str(), FILE_O_READ);
+    if (!f2) {
+        LOG_ERROR("Can't open tmp file for readback\n");
+        return false;
+    }
+
+    int c = 0;
+    uint8_t test_hash = 0;
+    while ((c = f2.read()) >= 0) {
+        test_hash ^= (uint8_t)c;
+    }
+    f2.close();
+
+    if (test_hash != hash) {
+        LOG_ERROR("Readback failed hash mismatch\n");
+        return false;
+    }
+
+    return !lfs_failed;
+}
+
+#endif

src/SafeFile.h

@@ -0,0 +1,49 @@
+#pragma once
+
+#include "FSCommon.h"
+#include "configuration.h"
+
+#ifdef FSCom
+
+/**
+ * This class provides 'safe'/paranoid file writing.
+ *
+ * Some of our filesystems (in particular the nrf52) may have bugs beneath our layer.  Therefore we want to
+ * be very careful about how we write files.  This class provides a restricted (Stream only) writing API for writing to files.
+ *
+ * Notably:
+ * - we keep a simple xor hash of all characters that were written.
+ * - We do not allow seeking (because we want to maintain our hash)
+ * - we provide an close() method which is similar to close but returns false if we were unable to successfully write the
+ * file.  Also this method
+ * - atomically replaces any old version of the file on the disk with our new file (after first rereading the file from the disk
+ * to confirm the hash matches)
+ * - Some files are super huge so we can't do the full atomic rename/copy (because of filesystem size limits).  If !fullAtomic
+ * then we still do the readback to verify file is valid so higher level code can handle failures.
+ */
+class SafeFile : public Print
+{
+  public:
+    SafeFile(char const *filepath, bool fullAtomic = false);
+
+    virtual size_t write(uint8_t);
+    virtual size_t write(const uint8_t *buffer, size_t size);
+
+    /**
+     * Atomically close the file (deleting any old versions) and readback the contents to confirm the hash matches
+     *
+     * @return false for failure
+     */
+    bool close();
+
+  private:
+    /// Read our (closed) tempfile back in and compare the hash
+    bool testReadback();
+
+    String filename;
+    File f;
+    bool fullAtomic;
+    uint8_t hash = 0;
+};
+
+#endif

src/SerialConsole.cpp

@@ -1,6 +1,8 @@
 #include "SerialConsole.h"
+#include "Default.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
+#include "Throttle.h"
 #include "configuration.h"
 #include "time.h"
 
@@ -47,7 +49,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
 #if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
     time_t timeout = millis();
     while (!Port) {
-        if ((millis() - timeout) < 5000) {
+        if (Throttle::isWithinTimespanMs(timeout, FIVE_SECONDS_MS)) {
             delay(100);
         } else {
             break;
@@ -72,8 +74,7 @@ void SerialConsole::flush()
 // For the serial port we can't really detect if any client is on the other side, so instead just look for recent messages
 bool SerialConsole::checkIsConnected()
 {
-    uint32_t now = millis();
-    return (now - lastContactMsec) < SERIAL_CONNECTION_TIMEOUT;
+    return Throttle::isWithinTimespanMs(lastContactMsec, SERIAL_CONNECTION_TIMEOUT);
 }
 
 /**
@@ -83,7 +84,7 @@ bool SerialConsole::checkIsConnected()
 bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 {
     // only talk to the API once the configuration has been loaded and we're sure the serial port is not disabled.
-    if (config.has_lora && config.device.serial_enabled) {
+    if (config.has_lora && config.security.serial_enabled) {
         // Switch to protobufs for log messages
         usingProtobufs = true;
         canWrite = true;
@@ -96,7 +97,7 @@ bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 
 void SerialConsole::log_to_serial(const char *logLevel, const char *format, va_list arg)
 {
-    if (usingProtobufs) {
+    if (usingProtobufs && config.security.debug_log_api_enabled) {
         meshtastic_LogRecord_Level ll = meshtastic_LogRecord_Level_UNSET; // default to unset
         switch (logLevel[0]) {
         case 'D':