Remove amd64

These comments were circa 4 years old. Remove them.

.devcontainer/Dockerfile

@@ -0,0 +1,25 @@
+FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
+
+# [Optional] Uncomment this section to install additional packages.
+RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
+    && apt-get -y install --no-install-recommends \
+    ca-certificates \
+    g++ \
+    git \
+    libbluetooth-dev \
+    libgpiod-dev \
+    liborcania-dev \
+    libssl-dev \
+    libulfius-dev \
+    libyaml-cpp-dev \
+    pipx \
+    pkg-config \
+    python3 \
+    python3-pip \
+    python3-venv \
+    python3-wheel \
+    wget \
+    zip \
+    && apt-get clean && rm -rf /var/lib/apt/lists/*
+
+RUN pipx install platformio==6.1.15

.devcontainer/devcontainer.json

@@ -0,0 +1,28 @@
+// For format details, see https://aka.ms/devcontainer.json. For config options, see the
+// README at: https://github.com/devcontainers/templates/tree/main/src/cpp
+{
+  "name": "Meshtastic Firmware Dev",
+  "build": {
+    "dockerfile": "Dockerfile"
+  },
+  "features": {
+    "ghcr.io/devcontainers/features/python:1": {
+      "installTools": true,
+      "version": "latest"
+    }
+  },
+  "customizations": {
+    "vscode": {
+      "extensions": [
+        "ms-vscode.cpptools",
+        "platformio.platformio-ide",
+      ]
+    }
+  },
+
+  // Use 'forwardPorts' to make a list of ports inside the container available locally.
+  "forwardPorts": [ 4403 ],
+
+  // Run commands to prepare the container for use
+  "postCreateCommand": ".devcontainer/setup.sh",
+}

.devcontainer/setup.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+git submodule update --init

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,10 +49,24 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
+        - Heltec Mesh Node T114
+        - Heltec Vision Master E213
+        - Heltec Vision Master E290
+        - Heltec Vision Master T190
+        - Nano G1
+        - Nano G1 Explorer
+        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - Seeed Wio Tracker 1110
+        - Seeed Card Tracker T1000-E
+        - Station G1
+        - Station G2
+        - unPhone
+        - CanaryOne
+        - Chatter
+        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,6 +18,7 @@ body:
         - ESP32
         - RP2040
         - Linux Native
+        - Cross-Platform
         - other
     validations:
       required: true

.github/actions/build-variant/action.yml

@@ -0,0 +1,90 @@
+name: Setup Build Variant Composite Action
+description: Variant build actions for Meshtastic Platform IO steps
+
+inputs:
+  board:
+    description: The board to build for
+    required: true
+  github_token:
+    description: GitHub token
+    required: true
+  build-script-path:
+    description: Path to the build script
+    required: true
+  remove-debug-flags:
+    description: A space separated list of files to remove debug flags from
+    required: false
+    default: ""
+  ota-firmware-source:
+    description: The OTA firmware file to pull
+    required: false
+    default: ""
+  ota-firmware-target:
+    description: The target path to store the OTA firmware file
+    required: false
+    default: ""
+  artifact-paths:
+    description: A newline separated list of paths to store as artifacts
+    required: false
+    default: ""
+  include-web-ui:
+    description: Include the web UI in the build
+    required: false
+    default: "false"
+
+runs:
+  using: composite
+  steps:
+    - name: Build base
+      id: base
+      uses: ./.github/actions/setup-base
+
+    - name: Pull web ui
+      if: inputs.include-web-ui == 'true'
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: meshtastic/web
+        file: build.tar
+        target: build.tar
+        token: ${{ inputs.github_token }}
+
+    - name: Unpack web ui
+      if: inputs.include-web-ui == 'true'
+      shell: bash
+      run: |
+        tar -xf build.tar -C data/static
+        rm build.tar
+
+    - name: Remove debug flags for release
+      shell: bash
+      if: inputs.remove-debug-flags != ''
+      run: |
+        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
+          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
+        done
+
+    - name: Build ${{ inputs.board }}
+      shell: bash
+      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
+
+    - name: Pull OTA Firmware
+      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
+      uses: dsaltares/fetch-gh-release-asset@master
+      with:
+        repo: meshtastic/firmware-ota
+        file: ${{ inputs.ota-firmware-source }}
+        target: ${{ inputs.ota-firmware-target }}
+        token: ${{ inputs.github_token }}
+
+    - name: Get release version string
+      shell: bash
+      run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+      id: version
+
+    - name: Store binaries as an artifact
+      uses: actions/upload-artifact@v4
+      with:
+        name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+        overwrite: true
+        path: |
+          ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -35,6 +35,7 @@ runs:
         python -m pip install --upgrade pip
         pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
         pip install -U platformio adafruit-nrfutil --no-build-isolation
+        pip install -U poetry --no-build-isolation
         pip install -U meshtastic --pre --no-build-isolation
 
     - name: Upgrade platformio

.github/dependabot.yml

@@ -0,0 +1,26 @@
+version: 2
+updates:
+  - package-ecosystem: docker
+    directory: devcontainer
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: docker
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: gitsubmodule
+    directory: /
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific
+  - package-ecosystem: github-actions
+    directory: /.github/workflows
+    schedule:
+      interval: daily
+      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
+      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,9 +1,9 @@
+### ❌ (Please delete all these tips and replace them with your text) ❌
+
 ## Thank you for sending in a pull request, here's some tips to get started!
 
-(Please delete all these tips and replace with your text)
-
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
-  to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
+  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
@@ -12,3 +12,4 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
+- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord

.github/workflows/build_esp32.yml

@@ -12,52 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
-
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/firmware-ota
-          file: firmware.bin
-          target: release/bleota.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware.bin
+          ota-firmware-target: release/bleota.bin
+          artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true

.github/workflows/build_esp32_c3.yml

@@ -14,50 +14,21 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+      - name: Build ESP32-C3
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
-      - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/firmware-ota
-          file: firmware-c3.bin
-          target: release/bleota-c3.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-c3.bin
+          ota-firmware-target: release/bleota-c3.bin
+          artifact-paths: |
             release/*.bin
             release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -12,50 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@master
+      - name: Build ESP32-S3
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          repo: meshtastic/web
-          file: build.tar
-          target: build.tar
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Unpack web ui
-        run: |
-          tar -xf build.tar -C data/static
-          rm build.tar
-      - name: Remove debug flags for release
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        run: |
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
-          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
-      - name: Build ESP32
-        run: bin/build-esp32.sh ${{ inputs.board }}
-
-      - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@master
-        with:
-          repo: meshtastic/firmware-ota
-          file: firmware-s3.bin
-          target: release/bleota-s3.bin
-          token: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Get release version string
-        shell: bash
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          remove-debug-flags: >-
+            ./arch/esp32/esp32.ini
+            ./arch/esp32/esp32s2.ini
+            ./arch/esp32/esp32s3.ini
+            ./arch/esp32/esp32c3.ini
+          build-script-path: bin/build-esp32.sh
+          ota-firmware-source: firmware-s3.bin
+          ota-firmware-target: release/bleota-s3.bin
+          artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true

.github/workflows/build_native.yml

@@ -10,7 +10,7 @@ jobs:
   build-native:
     runs-on: ubuntu-latest
     steps:
-      - name: Install libbluetooth
+      - name: Install libs needed for native build
         shell: bash
         run: |
           sudo apt-get update --fix-missing
@@ -67,7 +67,7 @@ jobs:
       - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           file: ./Dockerfile
@@ -77,7 +77,7 @@ jobs:
       - name: Docker build and push
         if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v6
         with:
           context: .
           file: ./Dockerfile

.github/workflows/build_nrf52.yml

@@ -12,23 +12,15 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
       - name: Build NRF52
-        run: bin/build-nrf52.sh ${{ inputs.board }}
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-nrf52.sh
+          artifact-paths: |
             release/*.hex
             release/*.uf2
             release/*.elf

.github/workflows/build_rpi2040.yml

@@ -12,22 +12,14 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
       - name: Build Raspberry Pi 2040
-        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-rpi2040.sh
+          artifact-paths: |
             release/*.uf2
             release/*.elf

.github/workflows/build_stm32.yml

@@ -12,22 +12,14 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - name: Build base
-        id: base
-        uses: ./.github/actions/setup-base
 
-      - name: Build STM32
-        run: bin/build-stm32.sh ${{ inputs.board }}
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
+      - name: Build Raspberry Pi 2040
+        id: build
+        uses: ./.github/actions/build-variant
         with:
-          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          overwrite: true
-          path: |
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          board: ${{ inputs.board }}
+          build-script-path: bin/build-stm32.sh
+          artifact-paths: |
             release/*.hex
             release/*.bin

.github/workflows/main_matrix.yml

@@ -51,6 +51,7 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
       - uses: actions/checkout@v4
       - name: Build base
@@ -119,11 +120,12 @@ jobs:
   package-raspbian-armv7l:
     uses: ./.github/workflows/package_raspbian_armv7l.yml
 
-  package-native:
-    uses: ./.github/workflows/package_amd64.yml
+  # package-native:
+  #   uses: ./.github/workflows/package_amd64.yml
 
   after-checks:
     runs-on: ubuntu-latest
+    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [check]
     steps:
       - name: Checkout code
@@ -137,8 +139,7 @@ jobs:
       contents: write
       pull-requests: write
     runs-on: ubuntu-latest
-    needs:
-      [
+    needs: [
         build-esp32,
         build-esp32-s3,
         build-esp32-c3,
@@ -147,7 +148,7 @@ jobs:
         build-stm32,
         package-raspbian,
         package-raspbian-armv7l,
-        package-native,
+        # package-native,
       ]
     steps:
       - name: Checkout code
@@ -231,7 +232,7 @@ jobs:
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [gather-artifacts, after-checks]
+    needs: [gather-artifacts]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -251,12 +252,6 @@ jobs:
           merge-multiple: true
           path: ./output
 
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
-          merge-multiple: true
-          path: ./output
-
       - name: Display structure of downloaded files
         run: ls -R
 
@@ -266,7 +261,7 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x meshtasticd_*
 
       - uses: actions/download-artifact@v4
         with:
@@ -314,6 +309,12 @@ jobs:
           asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
           asset_content_type: application/zip
 
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
+
       - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
         env:
@@ -334,22 +335,50 @@ jobs:
           asset_name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
           asset_content_type: application/vnd.debian.binary-package
 
-      - name: Add raspbian amd64 .deb
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
-          asset_name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
-          asset_content_type: application/vnd.debian.binary-package
+      # - name: Add raspbian amd64 .deb
+      #   uses: actions/upload-release-asset@v1
+      #   env:
+      #     GITHUB_TOKEN: ${{ github.token }}
+      #   with:
+      #     upload_url: ${{ steps.create_release.outputs.upload_url }}
+      #     asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+      #     asset_name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+      #     asset_content_type: application/vnd.debian.binary-package
 
       - name: Bump version.properties
         run: >-
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v6
+        uses: peter-evans/create-pull-request@v7
         with:
+          title: Bump version.properties
           add-paths: |
             version.properties
+
+      - name: Checkout meshtastic/meshtastic.github.io
+        uses: actions/checkout@v4
+        with:
+          repository: meshtastic/meshtastic.github.io
+          token: ${{ secrets.ARTIFACTS_TOKEN }}
+          path: meshtastic.github.io
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Extract firmware.zip
+        run: |
+          unzip ./firmware-${{ steps.version.outputs.version }}.zip -d meshtastic.github.io/firmware-${{ steps.version.outputs.version }}
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Commit and push changes
+        run: |
+          cd meshtastic.github.io
+          find . -type f -name 'meshtasticd_*' -exec rm -f {} +
+          git config --global user.name "github-actions[bot]"
+          git config --global user.email "github-actions[bot]@users.noreply.github.com"
+          git add .
+          git commit -m "Add firmware version ${{ steps.version.outputs.version }}"
+          git push

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-native
     steps:
       - name: Checkout code

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian
     steps:
       - name: Checkout code

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code

.github/workflows/sec_sast_semgrep_cron.yml

@@ -12,7 +12,7 @@ jobs:
   semgrep-full:
     runs-on: ubuntu-latest
     container:
-      image: returntocorp/semgrep
+      image: semgrep/semgrep
 
     steps:
       # step 1

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,9 +4,9 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     container:
-      image: returntocorp/semgrep
+      image: semgrep/semgrep
 
     steps:
       # step 1

.github/workflows/tests.yml

@@ -0,0 +1,91 @@
+name: End to end tests
+
+on:
+  schedule:
+    - cron: "0 0 * * *" # Run every day at midnight
+  workflow_dispatch: {}
+
+jobs:
+  test-simulator:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          sudo apt-get update --fix-missing
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Native
+        run: bin/build-native.sh
+
+      # We now run integration test before other build steps (to quickly see runtime failures)
+      - name: Build for native
+        run: platformio run -e native
+
+      - name: Integration test
+        run: |
+          .pio/build/native/program & sleep 10 # 5 seconds was not enough
+          echo "Simulator started, launching python test..."
+          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+      - name: PlatformIO Tests
+        run: platformio test -e native --junit-output-path testreport.xml
+
+      - name: Test Report
+        uses: dorny/test-reporter@v1.9.1
+        if: success() || failure() # run this step even if previous step failed
+        with:
+          name: PlatformIO Tests
+          path: testreport.xml
+          reporter: java-junit
+
+  hardware-tests:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
+          pip install -U platformio adafruit-nrfutil --no-build-isolation
+          pip install -U poetry --no-build-isolation
+          pip install -U meshtastic --pre --no-build-isolation
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Setup pnpm
+        uses: pnpm/action-setup@v4
+        with:
+          version: latest
+
+      - name: Install Dependencies
+        run: pnpm install
+
+      - name: Setup devices
+        run: pnpm run setup
+
+      - name: Execute end to end tests on connected hardware
+        run: pnpm run test

.github/workflows/update_protobufs.yml

@@ -1,4 +1,4 @@
-name: "Update protobufs and regenerate classes"
+name: Update protobufs and regenerate classes
 on: workflow_dispatch
 
 jobs:
@@ -26,8 +26,9 @@ jobs:
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v6
+        uses: peter-evans/create-pull-request@v7
         with:
+          title: Update protobufs and classes
           add-paths: |
             protobufs
             src/mesh

.gitmodules

@@ -1,3 +1,6 @@
 [submodule "protobufs"]
 	path = protobufs
 	url = https://github.com/meshtastic/protobufs.git
+[submodule "meshtestic"]
+	path = meshtestic
+	url = https://github.com/meshtastic/meshTestic

.gitpod.yml

@@ -0,0 +1,2 @@
+tasks:
+  - init: pip install platformio && pip install --upgrade pip

.trunk/trunk.yaml

@@ -1,36 +1,36 @@
 version: 0.1
 cli:
-  version: 1.22.2
+  version: 1.22.3
 plugins:
   sources:
     - id: trunk
-      ref: v1.5.0
+      ref: v1.6.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.76.3
+    - trufflehog@3.81.9
     - yamllint@1.35.1
-    - bandit@1.7.8
-    - checkov@3.2.95
+    - bandit@1.7.9
+    - checkov@3.2.238
     - terrascan@1.19.1
-    - trivy@0.51.1
+    - trivy@0.54.1
     #- trufflehog@3.63.2-rc0
-    - taplo@0.8.1
-    - ruff@0.4.4
+    - taplo@0.9.3
+    - ruff@0.6.2
     - isort@5.13.2
-    - markdownlint@0.40.0
-    - oxipng@9.1.1
+    - markdownlint@0.41.0
+    - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.0
-    - flake8@7.0.0
+    - actionlint@1.7.1
+    - flake8@7.1.1
     - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.4.2
+    - black@24.8.0
     - git-diff-check
-    - gitleaks@8.18.2
+    - gitleaks@8.18.4
     - clang-format@16.0.3
-    - prettier@3.2.5
+    - prettier@3.3.3
   ignore:
     - linters: [ALL]
       paths:

.vscode/extensions.json

@@ -2,8 +2,9 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-		"ms-vscode.cpptools",
-        "platformio.platformio-ide",
-        "trunk.io"
+        "platformio.platformio-ide"
     ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
 }

CONTRIBUTING.md

@@ -0,0 +1,47 @@
+# Contributing to Meshtastic Firmware
+
+We're excited that you're interested in contributing to the Meshtastic firmware! This document provides a high-level overview of how you can get involved.
+
+## Important First Steps
+
+Before you begin, please:
+
+1. **Read our documentation**: Our [official documentation](https://meshtastic.org/docs/) is a crucial resource. It contains essential information about the project.
+
+2. **Check out the firmware build guide**: For specific instructions on setting up your development environment and building the firmware, refer to our [Firmware Build Guide](https://meshtastic.org/docs/development/firmware/build/).
+
+3. Read our [Code of Conduct](https://meshtastic.org/docs/legal/conduct/)
+
+4. Join our [Discord community](https://discord.com/invite/ktMAKGBnBs) to connect with developers and other contributors to get help.
+
+## Getting Help and Discussing Ideas
+
+We encourage open communication and discussion before diving into code changes:
+
+1. **Use GitHub Discussions**: For new ideas, questions, or to discuss potential changes, start a conversation in our [GitHub Discussions](https://github.com/meshtastic/firmware/discussions) first. This helps us collaborate and avoid duplicate work.
+
+2. **Join our Discord**: For real-time chat and quick questions, join our [Discord server](https://discord.com/invite/ktMAKGBnBs). It's a great place to get help and connect with other developers and the community.
+
+3. **Reporting Issues**: If you've identified a bug, please use our bug report template when creating a new issue in the [issue tracker](https://github.com/meshtastic/firmware/issues). Ensure you've searched existing issues to avoid duplicates.
+
+## Making Contributions
+
+> [!IMPORTANT]
+> Before making any contributions, you must sign our Contributor License Agreement (CLA). You can do this by visiting https://cla-assistant.io/meshtastic/firmware. Be sure to use the GitHub account you will use to submit your contributions when signing.
+
+1. Fork the repository
+2. Create a new branch for your feature or bug fix
+3. Make your changes
+4. Test your changes thoroughly
+5. Create a pull request with a clear description, using the provided template, of your changes. Be sure to enable "Allow edits from maintainers".
+
+## Coding Standards
+
+To ensure consistent code formatting across the project:
+
+1. Install the [Trunk](https://marketplace.visualstudio.com/items?itemName=Trunk.io) extension for Visual Studio Code.
+2. Before submitting your changes, run `trunk fmt` to automatically format your code according to our standards.
+
+Adhering to these formatting guidelines helps maintain code consistency and makes the review process smoother.
+
+Thank you for contributing to Meshtastic!

arch/esp32/esp32.ini

@@ -5,7 +5,7 @@ custom_esp32_kind = esp32
 platform = platformio/espressif32@6.7.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -48,6 +48,7 @@ lib_deps =
   https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
 
 lib_ignore = 
   segger_rtt

arch/nrf52/nrf52.ini

@@ -16,10 +16,11 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}
+  rweather/Crypto@^0.4.0
 
 lib_ignore =
   BluetoothOTA

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
+platform = https://github.com/meshtastic/platform-native.git#6b3796d697481c8f6e3f4aa5c111bd9979f29e64
 framework = arduino
 
 build_src_filter = 
@@ -9,7 +9,7 @@ build_src_filter =
   -<nimble/> 
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
-  -<platform/rp2040>
+  -<platform/rp2xx0>
   -<mesh/wifi/>
   -<mesh/http/>
   +<mesh/raspihttp/>

arch/rp2xx0/rp2040.ini

@@ -8,7 +8,7 @@ board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/platform/rp2040
+  -Isrc/platform/rp2xx0
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 

arch/rp2xx0/rp2350.ini

@@ -0,0 +1,23 @@
+; Common settings for rp2040 Processor based targets
+[rp2350_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9e55f6db5c56b9867c69fe473f388beea4546672
+extends = arduino_base
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#a6ab6e1f95bc1428d667d55ea7173c0744acc03c ; 4.0.2+
+
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable 
+  -Isrc/platform/rp2xx0
+  -D__PLAT_RP2040__
+#  -D _POSIX_THREADS
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
+
+lib_ignore =
+  BluetoothOTA
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  rweather/Crypto

arch/stm32/stm32.ini

@@ -22,7 +22,7 @@ build_flags =
   -fdata-sections
   
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink

bin/build-nrf52.sh

@@ -46,3 +46,8 @@ else
 	cp bin/device-update.* $OUTDIR
 	cp bin/*.uf2 $OUTDIR
 fi
+
+if (echo $1 | grep -q "rak4631"); then
+	echo "Copying hex file"
+	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
+fi

bin/readprops.py

@@ -1,9 +1,5 @@
-
-
-import subprocess
 import configparser
-import traceback
-import sys
+import subprocess
 
 
 def readProps(prefsLoc):
@@ -11,27 +7,36 @@ def readProps(prefsLoc):
 
     config = configparser.RawConfigParser()
     config.read(prefsLoc)
-    version = dict(config.items('VERSION'))
-    verObj = dict(short = "{}.{}.{}".format(version["major"], version["minor"], version["build"]),
-        long = "unset")
+    version = dict(config.items("VERSION"))
+    verObj = dict(
+        short="{}.{}.{}".format(version["major"], version["minor"], version["build"]),
+        long="unset",
+    )
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
-        sha = subprocess.check_output(
-            ['git', 'rev-parse', '--short', 'HEAD']).decode("utf-8").strip()
-        isDirty = subprocess.check_output(
-            ['git', 'diff', 'HEAD']).decode("utf-8").strip()
+        sha = (
+            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
+            .decode("utf-8")
+            .strip()
+        )
+        isDirty = (
+            subprocess.check_output(["git", "diff", "HEAD"]).decode("utf-8").strip()
+        )
         suffix = sha
         # if isDirty:
         #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
         #     suffix = sha + "-d"
-        verObj['long'] = "{}.{}.{}.{}".format(
-            version["major"], version["minor"], version["build"], suffix)
+        verObj["long"] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix
+        )
     except:
         # print("Unexpected error:", sys.exc_info()[0])
         # traceback.print_exc()
-        verObj['long'] = verObj['short']
+        verObj["long"] = verObj["short"]
 
     # print("firmware version " + verStr)
     return verObj
+
+
 # print("path is" + ','.join(sys.path))

boards/CDEBYTE_EoRa-S3.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "CDEBYTE_EoRa-S3"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/ESP32-S3-WROOM-1-N4.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "ESP32-S3-WROOM-1-N4"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "default_tool": "esp-builtin",
     "onboard_tools": ["esp-builtin"],

boards/heltec_mesh_node_t114.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],

boards/lora_isp4520.json

@@ -1,40 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52832_s132_v6.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DNRF52832_XXAA -DNRF52",
-    "f_cpu": "64000000L",
-    "mcu": "nrf52832",
-    "variant": "lora_isp4520",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS132",
-      "sd_name": "s132",
-      "sd_version": "6.1.1",
-      "sd_fwid": "0x00B7"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd",
-    "openocd_target": "nrf52840-mdk-rs"
-  },
-  "frameworks": ["arduino"],
-  "name": "lora ISP4520",
-  "upload": {
-    "maximum_ram_size": 65536,
-    "maximum_size": 524288,
-    "require_upload_port": true,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
-  },
-  "url": "",
-  "vendor": "PsiSoft"
-}

boards/me25ls01-4y10td.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "extra_flags": "-DME25LS01_4Y10TD -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/ms24sf1.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DMS24SF1 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "MS24SF1-BOOT",
+    "mcu": "nrf52840",
+    "variant": "MINEWSEMI_MS24SF1_SX1262",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "MINEWSEMI_MS24SF1_SX1262",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/nrf52840-sx1262-ms24sf1",
+  "vendor": "Minesemi"
+}

boards/nordic_pca10059.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "extra_flags": "-DNORDIC_PCA10059 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/seeed-sensecap-indicator.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=0",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x1A86", "0x7523"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3r8"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed Studio SenseCAP Indicator",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "require_upload_port": true,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",
+  "vendor": "Seeed Studio"
+}

boards/tlora-t3s3-v1.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "tlora-t3s3-v1"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

platformio.ini

@@ -34,6 +34,7 @@ default_envs = tbeam
 ;default_envs = wio-e5
 ;default_envs = radiomaster_900_bandit_nano
 ;default_envs = radiomaster_900_bandit_micro
+;default_envs = radiomaster_900_bandit
 ;default_envs = heltec_capsule_sensor_v3
 ;default_envs = heltec_vision_master_t190
 ;default_envs = heltec_vision_master_e213
@@ -45,6 +46,7 @@ extra_configs =
   variants/*/platformio.ini
 
 [env]
+test_build_src = true
 extra_scripts = bin/platformio-custom.py
 
 ; note: we add src to our include search path so that lmic_project_config can override
@@ -79,12 +81,14 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_APRS
   -DRADIOLIB_EXCLUDE_LORAWAN
   -DMESHTASTIC_EXCLUDE_DROPZONE=1
+  -DBUILD_EPOCH=$UNIX_TIME
+  ;-D OLED_PL
 
 monitor_speed = 115200
 monitor_filters = direct
 
 lib_deps =
-  jgromes/RadioLib@~6.6.0
+  jgromes/RadioLib@~7.0.0
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306
   https://github.com/mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
@@ -128,6 +132,7 @@ lib_deps =
   adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BMP085 Library@^1.2.4
   adafruit/Adafruit BME280 Library@^2.2.2
+  adafruit/Adafruit BMP3XX Library@^2.1.5
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
@@ -151,8 +156,9 @@ lib_deps =
   https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
   boschsensortec/BME68x Sensor Library@^1.1.40407
   https://github.com/KodinLanewave/INA3221@^1.0.0
-  lewisxhe/SensorLib@^0.2.0
+  lewisxhe/SensorLib@0.2.0
   mprograms/QMC5883LCompass@^1.2.0
   
 
   https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee
+  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1

src/AccelerometerThread.h

@@ -11,6 +11,9 @@
 #include <Adafruit_LIS3DH.h>
 #include <Adafruit_LSM6DS3TRC.h>
 #include <Adafruit_MPU6050.h>
+#ifdef STK8XXX_INT
+#include <stk8baxx.h>
+#endif
 #include <Arduino.h>
 #include <SensorBMA423.hpp>
 #include <Wire.h>
@@ -24,6 +27,8 @@
 #define ACCELEROMETER_CHECK_INTERVAL_MS 100
 #define ACCELEROMETER_CLICK_THRESHOLD 40
 
+volatile static bool STK_IRQ;
+
 static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
 {
     Wire.beginTransmission(address);
@@ -79,6 +84,11 @@ class AccelerometerThread : public concurrency::OSThread
 
         if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
             wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::STK8BAXX && STK_IRQ) {
+            STK_IRQ = false;
+            if (config.display.wake_on_tap_or_motion) {
+                wakeScreen();
+            }
         } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
             uint8_t click = lis.getClick();
             if (!config.device.double_tap_as_button_press) {
@@ -188,6 +198,15 @@ class AccelerometerThread : public concurrency::OSThread
             mpu.setMotionDetectionDuration(20);
             mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
             mpu.setInterruptPinPolarity(true);
+#ifdef STK8XXX_INT
+        } else if (acceleremoter_type == ScanI2C::DeviceType::STK8BAXX && stk8baxx.STK8xxx_Initialization(STK8xxx_VAL_RANGE_2G)) {
+            STK_IRQ = false;
+            LOG_DEBUG("STX8BAxx initialized\n");
+            stk8baxx.STK8xxx_Anymotion_init();
+            pinMode(STK8XXX_INT, INPUT_PULLUP);
+            attachInterrupt(
+                digitalPinToInterrupt(STK8XXX_INT), [] { STK_IRQ = true; }, RISING);
+#endif
         } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
             LOG_DEBUG("LIS3DH initializing\n");
             lis.setRange(LIS3DH_RANGE_2_G);
@@ -262,6 +281,9 @@ class AccelerometerThread : public concurrency::OSThread
     ScanI2C::DeviceType acceleremoter_type;
     Adafruit_MPU6050 mpu;
     Adafruit_LIS3DH lis;
+#ifdef STK8XXX_INT
+    STK8xxx stk8baxx;
+#endif
     Adafruit_LSM6DS3TRC lsm;
     SensorBMA423 bmaSensor;
     bool BMA_IRQ = false;

src/AmbientLightingThread.h

@@ -1,3 +1,4 @@
+#include "Observer.h"
 #include "configuration.h"
 
 #ifdef HAS_NCP5623
@@ -22,10 +23,18 @@ class AmbientLightingThread : public concurrency::OSThread
   public:
     explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
     {
+        notifyDeepSleepObserver.observe(&notifyDeepSleep); // Let us know when shutdown() is issued.
+
+// Enables Ambient Lighting by default if conditions are meet.
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef ENABLE_AMBIENTLIGHTING
+        moduleConfig.ambient_lighting.led_state = true;
+#endif
+#endif
         // Uncomment to test module
         // moduleConfig.ambient_lighting.led_state = true;
         // moduleConfig.ambient_lighting.current = 10;
-        // // Default to a color based on our node number
+        // Default to a color based on our node number
         // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
         // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
         // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
@@ -82,9 +91,46 @@ class AmbientLightingThread : public concurrency::OSThread
         return disable();
     }
 
+    // When shutdown() is issued, setLightingOff will be called.
+    CallbackObserver<AmbientLightingThread, void *> notifyDeepSleepObserver =
+        CallbackObserver<AmbientLightingThread, void *>(this, &AmbientLightingThread::setLightingOff);
+
   private:
     ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
 
+    // Turn RGB lighting off, is used in junction to shutdown()
+    int setLightingOff(void *unused)
+    {
+#ifdef HAS_NCP5623
+        rgb.setCurrent(0);
+        rgb.setRed(0);
+        rgb.setGreen(0);
+        rgb.setBlue(0);
+        LOG_INFO("Turn Off NCP5623 Ambient lighting.\n");
+#endif
+#ifdef HAS_NEOPIXEL
+        pixels.clear();
+        pixels.show();
+        LOG_INFO("Turn Off NeoPixel Ambient lighting.\n");
+#endif
+#ifdef RGBLED_CA
+        analogWrite(RGBLED_RED, 255 - 0);
+        analogWrite(RGBLED_GREEN, 255 - 0);
+        analogWrite(RGBLED_BLUE, 255 - 0);
+        LOG_INFO("Turn Off Ambient lighting RGB Common Anode.\n");
+#elif defined(RGBLED_RED)
+        analogWrite(RGBLED_RED, 0);
+        analogWrite(RGBLED_GREEN, 0);
+        analogWrite(RGBLED_BLUE, 0);
+        LOG_INFO("Turn Off Ambient lighting RGB Common Cathode.\n");
+#endif
+#ifdef UNPHONE
+        unphone.rgb(0, 0, 0);
+        LOG_INFO("Turn Off unPhone Ambient lighting.\n");
+#endif
+        return 0;
+    }
+
     void setLighting()
     {
 #ifdef HAS_NCP5623
@@ -100,6 +146,17 @@ class AmbientLightingThread : public concurrency::OSThread
         pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                                  moduleConfig.ambient_lighting.blue),
                     0, NEOPIXEL_COUNT);
+
+// RadioMaster Bandit has addressable LED at the two buttons
+// this allow us to set different lighting for them in variant.h file.
+#ifdef RADIOMASTER_900_BANDIT
+#if defined(BUTTON1_COLOR) && defined(BUTTON1_COLOR_INDEX)
+        pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
+#endif
+#if defined(BUTTON2_COLOR) && defined(BUTTON2_COLOR_INDEX)
+        pixels.fill(BUTTON2_COLOR, BUTTON1_COLOR_INDEX, 1);
+#endif
+#endif
         pixels.show();
         LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,

src/DebugConfiguration.cpp

@@ -97,12 +97,14 @@ Syslog &Syslog::logMask(uint8_t priMask)
 
 void Syslog::enable()
 {
+    this->_client->begin(this->_port);
     this->_enabled = true;
 }
 
 void Syslog::disable()
 {
     this->_enabled = false;
+    this->_client->stop();
 }
 
 bool Syslog::isEnabled()
@@ -193,4 +195,4 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     return true;
 }
 
-#endif
+#endif

src/DebugConfiguration.h

@@ -45,7 +45,7 @@
 #define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
-#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE) && !defined(PIO_UNIT_TESTING)
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)

src/DisplayFormatters.cpp

@@ -3,6 +3,9 @@
 const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
 {
     switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+        return useShortName ? "ShortT" : "ShortTurbo";
+        break;
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
         return useShortName ? "ShortS" : "ShortSlow";
         break;

src/FSCommon.cpp

@@ -249,6 +249,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
                     file.close();
                 }
 #else
+                LOG_DEBUG(" %s (directory)\n", file.name());
                 listDir(file.name(), levels - 1, del);
                 file.close();
 #endif
@@ -275,7 +276,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
                 file.close();
             }
 #else
-            LOG_DEBUG(" %s (%i Bytes)\n", file.name(), file.size());
+            LOG_DEBUG("   %s (%i Bytes)\n", file.name(), file.size());
             file.close();
 #endif
         }

src/GpioLogic.cpp

@@ -10,6 +10,13 @@ void GpioVirtPin::set(bool value)
     }
 }
 
+void GpioHwPin::set(bool value)
+{
+    // if (num == 3) LOG_DEBUG("Setting pin %d to %d\n", num, value);
+    pinMode(num, OUTPUT);
+    digitalWrite(num, value);
+}
+
 GpioTransformer::GpioTransformer(GpioPin *outPin) : outPin(outPin) {}
 
 void GpioTransformer::set(bool value)
@@ -17,7 +24,7 @@ void GpioTransformer::set(bool value)
     outPin->set(value);
 }
 
-GpioNotTransformer::GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioTransformer(outPin), inPin(inPin)
+GpioUnaryTransformer::GpioUnaryTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioTransformer(outPin), inPin(inPin)
 {
     assert(!inPin->dependentPin); // We only allow one dependent pin
     inPin->dependentPin = this;
@@ -27,6 +34,18 @@ GpioNotTransformer::GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : Gp
     // update();
 }
 
+/**
+ * Update the output pin based on the current state of the input pin.
+ */
+void GpioUnaryTransformer::update()
+{
+    auto p = inPin->get();
+    if (p == GpioVirtPin::PinState::Unset)
+        return; // Not yet fully initialized
+
+    set(p);
+}
+
 /**
  * Update the output pin based on the current state of the input pin.
  */
@@ -69,6 +88,7 @@ void GpioBinaryTransformer::update()
             newValue = (GpioVirtPin::PinState)(p1 && p2);
             break;
         case Or:
+            // LOG_DEBUG("Doing GPIO OR\n");
             newValue = (GpioVirtPin::PinState)(p1 || p2);
             break;
         case Xor:

src/GpioLogic.h

@@ -29,7 +29,7 @@ class GpioHwPin : public GpioPin
   public:
     explicit GpioHwPin(uint32_t num) : num(num) {}
 
-    void set(bool value) { digitalWrite(num, value); }
+    void set(bool value);
 };
 
 class GpioTransformer;
@@ -42,7 +42,7 @@ class GpioBinaryTransformer;
 class GpioVirtPin : public GpioPin
 {
     friend class GpioBinaryTransformer;
-    friend class GpioNotTransformer;
+    friend class GpioUnaryTransformer;
 
   public:
     enum PinState { On = true, Off = false, Unset = 2 };
@@ -79,12 +79,31 @@ class GpioTransformer
 };
 
 /**
- * A transformer that performs a unary NOT operation from an input.
+ * A transformer that just drives a hw pin based on a virtual pin.
  */
-class GpioNotTransformer : public GpioTransformer
+class GpioUnaryTransformer : public GpioTransformer
 {
   public:
-    GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin);
+    GpioUnaryTransformer(GpioVirtPin *inPin, GpioPin *outPin);
+
+  protected:
+    friend class GpioVirtPin;
+
+    /**
+     * Update the output pin based on the current state of the input pin.
+     */
+    virtual void update();
+
+    GpioVirtPin *inPin;
+};
+
+/**
+ * A transformer that performs a unary NOT operation from an input.
+ */
+class GpioNotTransformer : public GpioUnaryTransformer
+{
+  public:
+    GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioUnaryTransformer(inPin, outPin) {}
 
   protected:
     friend class GpioVirtPin;
@@ -93,9 +112,6 @@ class GpioNotTransformer : public GpioTransformer
      * Update the output pin based on the current state of the input pin.
      */
     void update();
-
-  private:
-    GpioVirtPin *inPin;
 };
 
 /**

src/Power.cpp

@@ -13,6 +13,7 @@
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
+#include "Throttle.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
@@ -30,6 +31,7 @@
 #if HAS_WIFI
 #include <WiFi.h>
 #endif
+
 #endif
 
 #ifndef DELAY_FOREVER
@@ -136,6 +138,30 @@ using namespace meshtastic;
  */
 static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level sensor
 
+static void adcEnable()
+{
+#ifdef ADC_CTRL // enable adc voltage divider when we need to read
+#ifdef ADC_USE_PULLUP
+    pinMode(ADC_CTRL, INPUT_PULLUP);
+#else
+    pinMode(ADC_CTRL, OUTPUT);
+    digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+#endif
+    delay(10);
+#endif
+}
+
+static void adcDisable()
+{
+#ifdef ADC_CTRL // disable adc voltage divider when we need to read
+#ifdef ADC_USE_PULLUP
+    pinMode(ADC_CTRL, INPUT_PULLDOWN);
+#else
+    digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
+#endif
+#endif
+}
+
 /**
  * A simple battery level sensor that assumes the battery voltage is attached via a voltage-divider to an analog input
  */
@@ -220,31 +246,25 @@ class AnalogBatteryLevel : public HasBatteryLevel
             config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER;
         // Do not call analogRead() often.
         const uint32_t min_read_interval = 5000;
-        if (millis() - last_read_time_ms > min_read_interval) {
+        if (!Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
             last_read_time_ms = millis();
 
             uint32_t raw = 0;
             float scaled = 0;
 
+            adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
             scaled *= operativeAdcMultiplier;
-#else           // block for all other platforms
-#ifdef ADC_CTRL // enable adc voltage divider when we need to read
-            pinMode(ADC_CTRL, OUTPUT);
-            digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
-            delay(10);
-#endif
+#else // block for all other platforms
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
-#ifdef ADC_CTRL // disable adc voltage divider when we need to read
-            digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
-#endif
 #endif
+            adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -275,11 +295,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         uint8_t raw_c = 0; // raw reading counter
 
 #ifndef BAT_MEASURE_ADC_UNIT // ADC1
-#ifdef ADC_CTRL              // enable adc voltage divider when we need to read
-        pinMode(ADC_CTRL, OUTPUT);
-        digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
-        delay(10);
-#endif
         for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
             int val_ = adc1_get_raw(adc_channel);
             if (val_ >= 0) { // save only valid readings
@@ -288,18 +303,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             }
             // delayMicroseconds(100);
         }
-#ifdef ADC_CTRL // disable adc voltage divider when we need to read
-        digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
-#endif
-#else // ADC2
-#ifdef ADC_CTRL
-#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
-        pinMode(ADC_CTRL, OUTPUT);
-        digitalWrite(ADC_CTRL, LOW); // ACTIVE LOW
-        delay(10);
-#endif
-#endif // End ADC_CTRL
-
+#else                            // ADC2
 #ifdef CONFIG_IDF_TARGET_ESP32S3 // ESP32S3
         // ADC2 wifi bug workaround not required, breaks compile
         // On ESP32S3, ADC2 can take turns with Wifi (?)
@@ -334,12 +338,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #endif // BAT_MEASURE_ADC_UNIT
 
-#ifdef ADC_CTRL
-#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
-        digitalWrite(ADC_CTRL, HIGH);
-#endif
-#endif // End ADC_CTRL
-
 #endif // End BAT_MEASURE_ADC_UNIT
         return (raw / (raw_c < 1 ? 1 : raw_c));
     }

src/RF95Configuration.h

@@ -3,5 +3,4 @@
 #define RF95_RESET LORA_RESET
 #define RF95_IRQ LORA_DIO0  // on SX1262 version this is a no connect DIO0
 #define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95, but used for pure SX127x
-#define RF95_DIO2 LORA_DIO2 // Note: not really used for RF95
-#endif
+#endif

src/RedirectablePrint.cpp

@@ -38,8 +38,9 @@ size_t RedirectablePrint::write(uint8_t c)
 #ifdef USE_SEGGER
     SEGGER_RTT_PutChar(SEGGER_STDOUT_CH, c);
 #endif
-
-    if (!config.has_lora || config.device.serial_enabled)
+    // Account for legacy config transition
+    bool serialEnabled = config.has_security ? config.security.serial_enabled : config.device.serial_enabled;
+    if (!config.has_lora || serialEnabled)
         dest->write(c);
 
     return 1; // We always claim one was written, rather than trusting what the
@@ -212,7 +213,7 @@ void RedirectablePrint::log_to_syslog(const char *logLevel, const char *format,
 void RedirectablePrint::log_to_ble(const char *logLevel, const char *format, va_list arg)
 {
 #if !MESHTASTIC_EXCLUDE_BLUETOOTH
-    if (config.bluetooth.device_logging_enabled && !pauseBluetoothLogging) {
+    if (config.security.debug_log_api_enabled && !pauseBluetoothLogging) {
         bool isBleConnected = false;
 #ifdef ARCH_ESP32
         isBleConnected = nimbleBluetooth && nimbleBluetooth->isActive() && nimbleBluetooth->isConnected();

src/SerialConsole.cpp

@@ -1,6 +1,8 @@
 #include "SerialConsole.h"
+#include "Default.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
+#include "Throttle.h"
 #include "configuration.h"
 #include "time.h"
 
@@ -47,7 +49,7 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
 #if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
     time_t timeout = millis();
     while (!Port) {
-        if ((millis() - timeout) < 5000) {
+        if (Throttle::isWithinTimespanMs(timeout, FIVE_SECONDS_MS)) {
             delay(100);
         } else {
             break;
@@ -72,8 +74,7 @@ void SerialConsole::flush()
 // For the serial port we can't really detect if any client is on the other side, so instead just look for recent messages
 bool SerialConsole::checkIsConnected()
 {
-    uint32_t now = millis();
-    return (now - lastContactMsec) < SERIAL_CONNECTION_TIMEOUT;
+    return Throttle::isWithinTimespanMs(lastContactMsec, SERIAL_CONNECTION_TIMEOUT);
 }
 
 /**
@@ -83,7 +84,7 @@ bool SerialConsole::checkIsConnected()
 bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 {
     // only talk to the API once the configuration has been loaded and we're sure the serial port is not disabled.
-    if (config.has_lora && config.device.serial_enabled) {
+    if (config.has_lora && config.security.serial_enabled) {
         // Switch to protobufs for log messages
         usingProtobufs = true;
         canWrite = true;
@@ -96,7 +97,7 @@ bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 
 void SerialConsole::log_to_serial(const char *logLevel, const char *format, va_list arg)
 {
-    if (usingProtobufs && config.device.debug_log_enabled) {
+    if (usingProtobufs && config.security.debug_log_api_enabled) {
         meshtastic_LogRecord_Level ll = meshtastic_LogRecord_Level_UNSET; // default to unset
         switch (logLevel[0]) {
         case 'D':
@@ -120,4 +121,4 @@ void SerialConsole::log_to_serial(const char *logLevel, const char *format, va_l
         emitLogRecord(ll, thread ? thread->ThreadName.c_str() : "", format, arg);
     } else
         RedirectablePrint::log_to_serial(logLevel, format, arg);
-}
+}

src/configuration.h

@@ -124,7 +124,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define INA3221_ADDR 0x42
 #define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
-#define QMC5883L_ADDR 0x1E
+#define QMC5883L_ADDR 0x0D
+#define HMC5883L_ADDR 0x1E
 #define SHTC3_ADDR 0x70
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
@@ -144,6 +145,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // ACCELEROMETER
 // -----------------------------------------------------------------------------
 #define MPU6050_ADDR 0x68
+#define STK8BXX_ADR 0x18
 #define LIS3DH_ADR 0x18
 #define BMA423_ADDR 0x19
 #define LSM6DS3_ADDR 0x6A
@@ -162,6 +164,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // IO Expander
 // -----------------------------------------------------------------------------
+#define TCA9535_ADDR 0x20
 #define TCA9555_ADDR 0x26
 
 // -----------------------------------------------------------------------------
@@ -171,12 +174,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define GPS_THREAD_INTERVAL 200
 #endif
 
+// -----------------------------------------------------------------------------
+// Touchscreen
+// -----------------------------------------------------------------------------
+#define FT6336U_ADDR 0x48
+
 // convert 24-bit color to 16-bit (56K)
 #define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
 
 /* Step #1: offer chance for variant-specific defines */
 #include "variant.h"
 
+#if defined(VEXT_ENABLE) && !defined(VEXT_ON_VALUE)
+// Older variant.h files might not be defining this value, so stay with the old default
+#define VEXT_ON_VALUE LOW
+#endif
+
 #ifndef GPS_BAUDRATE
 #define GPS_BAUDRATE 9600
 #endif
@@ -193,6 +206,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEFAULT_SHUTDOWN_SECONDS 2
 #endif
 
+#ifndef MINIMUM_SAFE_FREE_HEAP
+#define MINIMUM_SAFE_FREE_HEAP 1500
+#endif
+
+#ifndef WIRE_INTERFACES_COUNT
+// Officially an NRF52 macro
+// Repurposed cross-platform to identify devices using Wire1
+#if defined(I2C_SDA1) || defined(PIN_WIRE1_SDA)
+#define WIRE_INTERFACES_COUNT 2
+#elif HAS_WIRE
+#define WIRE_INTERFACES_COUNT 1
+#endif
+#endif
+
 /* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
 
 #ifndef HAS_WIFI
@@ -256,6 +283,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_MQTT 1
 #define MESHTASTIC_EXCLUDE_POWERMON 1
 #define MESHTASTIC_EXCLUDE_I2C 1
+#define MESHTASTIC_EXCLUDE_PKI 1
 #define MESHTASTIC_EXCLUDE_POWER_FSM 1
 #define MESHTASTIC_EXCLUDE_TZ 1
 #endif
@@ -280,6 +308,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_INPUTBROKER 1
 #define MESHTASTIC_EXCLUDE_SERIAL 1
 #define MESHTASTIC_EXCLUDE_POWERSTRESS 1
+#define MESHTASTIC_EXCLUDE_ADMIN 1
 #endif
 
 // // Turn off wifi even if HW supports wifi (webserver relies on wifi and is also disabled)
@@ -313,4 +342,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 #include "DebugConfiguration.h"
-#include "RF95Configuration.h"
+#include "RF95Configuration.h"

src/detect/ScanI2C.cpp

@@ -37,8 +37,8 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160};
-    return firstOfOrNONE(5, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX};
+    return firstOfOrNONE(6, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const

src/detect/ScanI2C.h

@@ -24,6 +24,7 @@ class ScanI2C
         BME_280,
         BMP_280,
         BMP_085,
+        BMP_3XX,
         INA260,
         INA219,
         INA3221,
@@ -35,12 +36,14 @@ class ScanI2C
         QMC6310,
         QMI8658,
         QMC5883L,
+        HMC5883L,
         PMSA0031,
         MPU6050,
         LIS3DH,
         BMA423,
         BQ24295,
         LSM6DS3,
+        TCA9535,
         TCA9555,
         VEML7700,
         RCWL9620,
@@ -51,7 +54,9 @@ class ScanI2C
         AHT10,
         BMX160,
         DFROBOT_LARK,
-        NAU7802
+        NAU7802,
+        FT6336U,
+        STK8BAXX
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;
@@ -114,4 +119,4 @@ class ScanI2C
 
   private:
     bool shouldSuppressScreen = false;
-};
+};

src/detect/ScanI2CTwoWire.cpp

@@ -162,13 +162,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
     Melopero_RV3028 rtc;
 #endif
 
-#ifdef I2C_SDA1
+#if WIRE_INTERFACES_COUNT == 2
     if (port == I2CPort::WIRE1) {
         i2cBus = &Wire1;
     } else {
 #endif
         i2cBus = &Wire;
-#ifdef I2C_SDA1
+#if WIRE_INTERFACES_COUNT == 2
     }
 #endif
 
@@ -267,8 +267,19 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     type = BMP_085;
                     break;
                 default:
-                    LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
-                    type = BMP_280;
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // GET_ID
+                    switch (registerValue) {
+                    case 0x50: // BMP-388 should be 0x50
+                        LOG_INFO("BMP-388 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                        type = BMP_3XX;
+                        break;
+                    case 0x58: // BMP-280 should be 0x58
+                    default:
+                        LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                        type = BMP_280;
+                        break;
+                    }
+                    break;
                 }
                 break;
 #ifndef HAS_NCP5623
@@ -302,20 +313,36 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
             case MCP9808_ADDR:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
-                if (registerValue == 0x0400) {
-                    type = MCP9808;
-                    LOG_INFO("MCP9808 sensor found\n");
-                } else {
-                    type = LIS3DH;
-                    LOG_INFO("LIS3DH accelerometer found\n");
+                // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some
+                // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips.
+                {
+                    // Check register 0x00 for 0x8700 response to ID STK8BA53 chip.
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 2);
+                    if (registerValue == 0x8700) {
+                        type = STK8BAXX;
+                        LOG_INFO("STK8BAXX accelerometer found\n");
+                        break;
+                    }
+
+                    // Check register 0x07 for 0x0400 response to ID MCP9808 chip.
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
+                    if (registerValue == 0x0400) {
+                        type = MCP9808;
+                        LOG_INFO("MCP9808 sensor found\n");
+                        break;
+                    }
+
+                    // Check register 0x0F for 0x3300 response to ID LIS3DH chip.
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2);
+                    if (registerValue == 0x3300 || registerValue == 0x3333) { // RAK4631 WisBlock has LIS3DH register at 0x3333
+                        type = LIS3DH;
+                        LOG_INFO("LIS3DH accelerometer found\n");
+                    }
+                    break;
                 }
-
-                break;
-
             case SHT31_4x_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
-                if (registerValue == 0x11a2 || registerValue == 0x11da) {
+                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c) {
                     type = SHT4X;
                     LOG_INFO("SHT4X sensor found\n");
                 } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
@@ -354,18 +381,21 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 
                 SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found\n")
+                SCAN_SIMPLE_CASE(HMC5883L_ADDR, HMC5883L, "HMC5883L 3-Axis digital compass found\n")
 
                 SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
                 SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
                 SCAN_SIMPLE_CASE(BMX160_ADDR, BMX160, "BMX160 accelerometer found\n");
                 SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535 I2C expander found\n");
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found\n");
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700 light sensor found\n");
                 SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591 light sensor found\n");
                 SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001 light sensor found\n");
                 SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632 IR temp sensor found\n");
                 SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802 based scale found\n");
+                SCAN_SIMPLE_CASE(FT6336U_ADDR, FT6336U, "FT6336U touchscreen found\n");
 
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);
@@ -392,7 +422,7 @@ TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
     if (address.port == ScanI2C::I2CPort::WIRE) {
         return &Wire;
     } else {
-#ifdef I2C_SDA1
+#if WIRE_INTERFACES_COUNT == 2
         return &Wire1;
 #else
         return &Wire;

src/gps/GPS.cpp

@@ -2,9 +2,11 @@
 #if !MESHTASTIC_EXCLUDE_GPS
 #include "Default.h"
 #include "GPS.h"
+#include "GpioLogic.h"
 #include "NodeDB.h"
 #include "PowerMon.h"
 #include "RTC.h"
+#include "Throttle.h"
 
 #include "main.h" // pmu_found
 #include "sleep.h"
@@ -25,6 +27,8 @@
 
 #if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
 HardwareSerial *GPS::_serial_gps = &Serial1;
+#elif defined(ARCH_RP2040)
+SerialUART *GPS::_serial_gps = &Serial1;
 #else
 HardwareSerial *GPS::_serial_gps = NULL;
 #endif
@@ -165,18 +169,21 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
             b = _serial_gps->read();
 
 #ifdef GPS_DEBUG
-            LOG_DEBUG("%02X", (char *)buffer);
+            LOG_DEBUG("%c", (b >= 32 && b <= 126) ? b : '.');
 #endif
             buffer[bytesRead] = b;
             bytesRead++;
             if ((bytesRead == 767) || (b == '\r')) {
                 if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
 #ifdef GPS_DEBUG
-                    LOG_DEBUG("\r");
+                    LOG_DEBUG("\r\nFound: %s\r\n", message); // Log the found message
 #endif
                     return GNSS_RESPONSE_OK;
                 } else {
                     bytesRead = 0;
+#ifdef GPS_DEBUG
+                    LOG_DEBUG("\r\n");
+#endif
                 }
             }
         }
@@ -200,7 +207,7 @@ GPS_RESPONSE GPS::getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMilli
     // ACK-NACK| 0xBA | 0xCE | 0x04 | 0x00 | 0x05 | 0x00 | 0xXX | 0xXX | 0x00 | 0x00 | 0xXX | 0xXX | 0xXX | 0xXX |
     // ACK-ACK | 0xBA | 0xCE | 0x04 | 0x00 | 0x05 | 0x01 | 0xXX | 0xXX | 0x00 | 0x00 | 0xXX | 0xXX | 0xXX | 0xXX |
 
-    while (millis() - startTime < waitMillis) {
+    while (Throttle::isWithinTimespanMs(startTime, waitMillis)) {
         if (_serial_gps->available()) {
             buffer[bufferPos++] = _serial_gps->read();
 
@@ -269,7 +276,7 @@ GPS_RESPONSE GPS::getACK(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis)
         buf[9] += buf[8];
     }
 
-    while (millis() - startTime < waitMillis) {
+    while (Throttle::isWithinTimespanMs(startTime, waitMillis)) {
         if (ack > 9) {
 #ifdef GPS_DEBUG
             LOG_DEBUG("\n");
@@ -326,7 +333,7 @@ int GPS::getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
     uint32_t startTime = millis();
     uint16_t needRead;
 
-    while (millis() - startTime < waitMillis) {
+    while (Throttle::isWithinTimespanMs(startTime, waitMillis)) {
         if (_serial_gps->available()) {
             int c = _serial_gps->read();
             switch (ubxFrameCounter) {
@@ -504,283 +511,110 @@ bool GPS::setup()
             delay(250);
             _serial_gps->write("$CFGMSG,6,1,0\r\n");
             delay(250);
-        } else if (gnssModel == GNSS_MODEL_AG3335) {
+        } else if (gnssModel == GNSS_MODEL_AG3335 || gnssModel == GNSS_MODEL_AG3352) {
 
-            _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B"); // Enable GPS+GALILEO+NAVIC
+            _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B\r\n"); // Enable GPS+GALILEO+NAVIC
 
             // Configure NMEA (sentences will output once per fix)
-            _serial_gps->write("$PAIR062,0,0*3F"); // GGA ON
-            _serial_gps->write("$PAIR062,1,0*3F"); // GLL OFF
-            _serial_gps->write("$PAIR062,2,1*3D"); // GSA ON
-            _serial_gps->write("$PAIR062,3,0*3D"); // GSV OFF
-            _serial_gps->write("$PAIR062,4,0*3B"); // RMC ON
-            _serial_gps->write("$PAIR062,5,0*3B"); // VTG OFF
-            _serial_gps->write("$PAIR062,6,1*39"); // ZDA ON
+            _serial_gps->write("$PAIR062,0,1*3F\r\n"); // GGA ON
+            _serial_gps->write("$PAIR062,1,0*3F\r\n"); // GLL OFF
+            _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF
+            _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF
+            _serial_gps->write("$PAIR062,4,1*3B\r\n"); // RMC ON
+            _serial_gps->write("$PAIR062,5,0*3B\r\n"); // VTG OFF
+            _serial_gps->write("$PAIR062,6,0*38\r\n"); // ZDA ON
 
             delay(250);
-            _serial_gps->write("$PAIR513*3D"); // save configuration
+            _serial_gps->write("$PAIR513*3D\r\n"); // save configuration
+        } else if (gnssModel == GNSS_MODEL_UBLOX6) {
+            clearBuffer();
+            SEND_UBX_PACKET(0x06, 0x02, _message_DISABLE_TXT_INFO, "Unable to disable text info messages.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x39, _message_JAM_6_7, "Unable to enable interference resistance.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x23, _message_NAVX5, "Unable to configure NAVX5 settings.\n", 500);
 
-        } else if (gnssModel == GNSS_MODEL_UBLOX) {
-            // Configure GNSS system to GPS+SBAS+GLONASS (Module may restart after this command)
-            // We need set it because by default it is GPS only, and we want to use GLONASS too
-            // Also we need SBAS for better accuracy and extra features
-            // ToDo: Dynamic configure GNSS systems depending of LoRa region
+            // Turn off unwanted NMEA messages, set update rate
+            SEND_UBX_PACKET(0x06, 0x08, _message_1HZ, "Unable to set GPS update rate.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_GLL, "Unable to disable NMEA GLL.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_GSA, "Unable to Enable NMEA GSA.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_GSV, "Unable to disable NMEA GSV.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_VTG, "Unable to disable NMEA VTG.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_RMC, "Unable to enable NMEA RMC.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_GGA, "Unable to enable NMEA GGA.\n", 500);
 
-            if (strncmp(info.hwVersion, "000A0000", 8) != 0) {
-                if (strncmp(info.hwVersion, "00040007", 8) != 0) {
-                    // The original ublox Neo-6 is GPS only and doesn't support the UBX-CFG-GNSS message
-                    // Max7 seems to only support GPS *or* GLONASS
-                    // Neo-7 is supposed to support GPS *and* GLONASS but NAKs the CFG-GNSS command to do it
-                    // So treat all the u-blox 7 series as GPS only
-                    // M8 can support 3 constallations at once so turn on GPS, GLONASS and Galileo (or BeiDou)
+            clearBuffer();
+            SEND_UBX_PACKET(0x06, 0x11, _message_CFG_RXM_ECO, "Unable to enable powersaving ECO mode for Neo-6.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "Unable to enable powersaving details for GPS.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_AID, "Unable to disable UBX-AID.\n", 500);
 
-                    if (strncmp(info.hwVersion, "00070000", 8) == 0) {
-                        LOG_DEBUG("Setting GPS+SBAS\n");
-                        msglen = makeUBXPacket(0x06, 0x3e, sizeof(_message_GNSS_7), _message_GNSS_7);
-                        _serial_gps->write(UBXscratch, msglen);
-                    } else {
-                        msglen = makeUBXPacket(0x06, 0x3e, sizeof(_message_GNSS_8), _message_GNSS_8);
-                        _serial_gps->write(UBXscratch, msglen);
-                    }
+            msglen = makeUBXPacket(0x06, 0x09, sizeof(_message_SAVE), _message_SAVE);
+            _serial_gps->write(UBXscratch, msglen);
+            if (getACK(0x06, 0x09, 2000) != GNSS_RESPONSE_OK) {
+                LOG_WARN("Unable to save GNSS module configuration.\n");
+            } else {
+                LOG_INFO("GNSS module configuration saved!\n");
+            }
+        } else if (gnssModel == GNSS_MODEL_UBLOX7 || gnssModel == GNSS_MODEL_UBLOX8 || gnssModel == GNSS_MODEL_UBLOX9) {
+            if (gnssModel == GNSS_MODEL_UBLOX7) {
+                LOG_DEBUG("Setting GPS+SBAS\n");
+                msglen = makeUBXPacket(0x06, 0x3e, sizeof(_message_GNSS_7), _message_GNSS_7);
+                _serial_gps->write(UBXscratch, msglen);
+            } else { // 8,9
+                msglen = makeUBXPacket(0x06, 0x3e, sizeof(_message_GNSS_8), _message_GNSS_8);
+                _serial_gps->write(UBXscratch, msglen);
+            }
 
-                    if (getACK(0x06, 0x3e, 800) == GNSS_RESPONSE_NAK) {
-                        // It's not critical if the module doesn't acknowledge this configuration.
-                        LOG_INFO("Unable to reconfigure GNSS - defaults maintained. Is this module GPS-only?\n");
-                    } else {
-                        if (strncmp(info.hwVersion, "00070000", 8) == 0) {
-                            LOG_INFO("GNSS configured for GPS+SBAS. Pause for 0.75s before sending next command.\n");
-                        } else {
-                            LOG_INFO(
-                                "GNSS configured for GPS+SBAS+GLONASS+Galileo. Pause for 0.75s before sending next command.\n");
-                        }
-                        // Documentation say, we need wait atleast 0.5s after reconfiguration of GNSS module, before sending next
-                        // commands for the M8 it tends to be more... 1 sec should be enough ;>)
-                        delay(1000);
-                    }
+            if (getACK(0x06, 0x3e, 800) == GNSS_RESPONSE_NAK) {
+                // It's not critical if the module doesn't acknowledge this configuration.
+                LOG_INFO("Unable to reconfigure GNSS - defaults maintained. Is this module GPS-only?\n");
+            } else {
+                if (gnssModel == GNSS_MODEL_UBLOX7) {
+                    LOG_INFO("GNSS configured for GPS+SBAS.\n");
+                } else { // 8,9
+                    LOG_INFO("GNSS configured for GPS+SBAS+GLONASS+Galileo.\n");
                 }
-                // Disable Text Info messages
-                msglen = makeUBXPacket(0x06, 0x02, sizeof(_message_DISABLE_TXT_INFO), _message_DISABLE_TXT_INFO);
+                // Documentation say, we need wait atleast 0.5s after reconfiguration of GNSS module, before sending next
+                // commands for the M8 it tends to be more... 1 sec should be enough ;>)
+                delay(1000);
+            }
+
+            // Disable Text Info messages //6,7,8,9
+            clearBuffer();
+            SEND_UBX_PACKET(0x06, 0x02, _message_DISABLE_TXT_INFO, "Unable to disable text info messages.\n", 500);
+
+            if (gnssModel == GNSS_MODEL_UBLOX8) { // 8
                 clearBuffer();
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x02, 500) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable text info messages.\n");
-                }
-                // ToDo add M10 tests for below
-                if (strncmp(info.hwVersion, "00080000", 8) == 0) {
-                    msglen = makeUBXPacket(0x06, 0x39, sizeof(_message_JAM_8), _message_JAM_8);
+                SEND_UBX_PACKET(0x06, 0x39, _message_JAM_8, "Unable to enable interference resistance.\n", 500);
+
+                clearBuffer();
+                SEND_UBX_PACKET(0x06, 0x23, _message_NAVX5_8, "Unable to configure NAVX5_8 settings.\n", 500);
+            } else { // 6,7,9
+                SEND_UBX_PACKET(0x06, 0x39, _message_JAM_6_7, "Unable to enable interference resistance.\n", 500);
+                SEND_UBX_PACKET(0x06, 0x23, _message_NAVX5, "Unable to configure NAVX5 settings.\n", 500);
+            }
+            // Turn off unwanted NMEA messages, set update rate
+            SEND_UBX_PACKET(0x06, 0x08, _message_1HZ, "Unable to set GPS update rate.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_GLL, "Unable to disable NMEA GLL.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_GSA, "Unable to Enable NMEA GSA.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_GSV, "Unable to disable NMEA GSV.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_VTG, "Unable to disable NMEA VTG.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_RMC, "Unable to enable NMEA RMC.\n", 500);
+            SEND_UBX_PACKET(0x06, 0x01, _message_GGA, "Unable to enable NMEA GGA.\n", 500);
+
+            if (uBloxProtocolVersion >= 18) {
+                clearBuffer();
+                SEND_UBX_PACKET(0x06, 0x86, _message_PMS, "Unable to enable powersaving for GPS.\n", 500);
+                SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "Unable to enable powersaving details for GPS.\n", 500);
+
+                // For M8 we want to enable NMEA vserion 4.10 so we can see the additional sats.
+                if (gnssModel == GNSS_MODEL_UBLOX8) {
                     clearBuffer();
-                    _serial_gps->write(UBXscratch, msglen);
-                    if (getACK(0x06, 0x39, 500) != GNSS_RESPONSE_OK) {
-                        LOG_WARN("Unable to enable interference resistance.\n");
-                    }
-
-                    msglen = makeUBXPacket(0x06, 0x23, sizeof(_message_NAVX5_8), _message_NAVX5_8);
-                    clearBuffer();
-                    _serial_gps->write(UBXscratch, msglen);
-                    if (getACK(0x06, 0x23, 500) != GNSS_RESPONSE_OK) {
-                        LOG_WARN("Unable to configure NAVX5_8 settings.\n");
-                    }
-                } else {
-                    msglen = makeUBXPacket(0x06, 0x39, sizeof(_message_JAM_6_7), _message_JAM_6_7);
-                    _serial_gps->write(UBXscratch, msglen);
-                    if (getACK(0x06, 0x39, 500) != GNSS_RESPONSE_OK) {
-                        LOG_WARN("Unable to enable interference resistance.\n");
-                    }
-
-                    msglen = makeUBXPacket(0x06, 0x23, sizeof(_message_NAVX5), _message_NAVX5);
-                    _serial_gps->write(UBXscratch, msglen);
-                    if (getACK(0x06, 0x23, 500) != GNSS_RESPONSE_OK) {
-                        LOG_WARN("Unable to configure NAVX5 settings.\n");
-                    }
-                }
-                // Turn off unwanted NMEA messages, set update rate
-
-                msglen = makeUBXPacket(0x06, 0x08, sizeof(_message_1HZ), _message_1HZ);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x08, 500) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to set GPS update rate.\n");
-                }
-
-                msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_GLL), _message_GLL);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable NMEA GLL.\n");
-                }
-
-                msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_GSA), _message_GSA);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to Enable NMEA GSA.\n");
-                }
-
-                msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_GSV), _message_GSV);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable NMEA GSV.\n");
-                }
-
-                msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_VTG), _message_VTG);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable NMEA VTG.\n");
-                }
-
-                msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_RMC), _message_RMC);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to enable NMEA RMC.\n");
-                }
-
-                msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_GGA), _message_GGA);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to enable NMEA GGA.\n");
-                }
-
-                if (uBloxProtocolVersion >= 18) {
-                    msglen = makeUBXPacket(0x06, 0x86, sizeof(_message_PMS), _message_PMS);
-                    clearBuffer();
-                    _serial_gps->write(UBXscratch, msglen);
-                    if (getACK(0x06, 0x86, 500) != GNSS_RESPONSE_OK) {
-                        LOG_WARN("Unable to enable powersaving for GPS.\n");
-                    }
-                    msglen = makeUBXPacket(0x06, 0x3B, sizeof(_message_CFG_PM2), _message_CFG_PM2);
-                    _serial_gps->write(UBXscratch, msglen);
-                    if (getACK(0x06, 0x3B, 500) != GNSS_RESPONSE_OK) {
-                        LOG_WARN("Unable to enable powersaving details for GPS.\n");
-                    }
-                    // For M8 we want to enable NMEA vserion 4.10 so we can see the additional sats.
-                    if (strncmp(info.hwVersion, "00080000", 8) == 0) {
-                        msglen = makeUBXPacket(0x06, 0x17, sizeof(_message_NMEA), _message_NMEA);
-                        clearBuffer();
-                        _serial_gps->write(UBXscratch, msglen);
-                        if (getACK(0x06, 0x17, 500) != GNSS_RESPONSE_OK) {
-                            LOG_WARN("Unable to enable NMEA 4.10.\n");
-                        }
-                    }
-                } else {
-                    if (strncmp(info.hwVersion, "00040007", 8) == 0) { // This PSM mode is only for Neo-6
-                        msglen = makeUBXPacket(0x06, 0x11, 0x2, _message_CFG_RXM_ECO);
-                        _serial_gps->write(UBXscratch, msglen);
-                        if (getACK(0x06, 0x11, 500) != GNSS_RESPONSE_OK) {
-                            LOG_WARN("Unable to enable powersaving ECO mode for Neo-6.\n");
-                        }
-                        msglen = makeUBXPacket(0x06, 0x3B, sizeof(_message_CFG_PM2), _message_CFG_PM2);
-                        _serial_gps->write(UBXscratch, msglen);
-                        if (getACK(0x06, 0x3B, 500) != GNSS_RESPONSE_OK) {
-                            LOG_WARN("Unable to enable powersaving details for GPS.\n");
-                        }
-                        msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_AID), _message_AID);
-                        _serial_gps->write(UBXscratch, msglen);
-                        if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
-                            LOG_WARN("Unable to disable UBX-AID.\n");
-                        }
-                    } else {
-                        msglen = makeUBXPacket(0x06, 0x11, 0x2, _message_CFG_RXM_PSM);
-                        _serial_gps->write(UBXscratch, msglen);
-                        if (getACK(0x06, 0x11, 500) != GNSS_RESPONSE_OK) {
-                            LOG_WARN("Unable to enable powersaving mode for GPS.\n");
-                        }
-
-                        msglen = makeUBXPacket(0x06, 0x3B, sizeof(_message_CFG_PM2), _message_CFG_PM2);
-                        _serial_gps->write(UBXscratch, msglen);
-                        if (getACK(0x06, 0x3B, 500) != GNSS_RESPONSE_OK) {
-                            LOG_WARN("Unable to enable powersaving details for GPS.\n");
-                        }
-                    }
+                    SEND_UBX_PACKET(0x06, 0x17, _message_NMEA, "Unable to enable NMEA 4.10.\n", 500);
                 }
             } else {
-                // LOG_INFO("u-blox M10 hardware found.\n");
-                delay(1000);
-                // First disable all NMEA messages in RAM layer
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_NMEA_RAM), _message_VALSET_DISABLE_NMEA_RAM);
-                clearBuffer();
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable NMEA messages for M10 GPS RAM.\n");
-                }
-                delay(250);
-                // Next disable unwanted NMEA messages in BBR layer
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_NMEA_BBR), _message_VALSET_DISABLE_NMEA_BBR);
-                clearBuffer();
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable NMEA messages for M10 GPS BBR.\n");
-                }
-                delay(250);
-                // Disable Info txt messages in RAM layer
-                msglen =
-                    makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_TXT_INFO_RAM), _message_VALSET_DISABLE_TXT_INFO_RAM);
-                clearBuffer();
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable Info messages for M10 GPS RAM.\n");
-                }
-                delay(250);
-                // Next disable Info txt messages in BBR layer
-                msglen =
-                    makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_TXT_INFO_BBR), _message_VALSET_DISABLE_TXT_INFO_BBR);
-                clearBuffer();
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable Info messages for M10 GPS BBR.\n");
-                }
-                // Do M10 configuration for Power Management.
-
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_PM_RAM), _message_VALSET_PM_RAM);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to enable powersaving for M10 GPS RAM.\n");
-                }
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_PM_BBR), _message_VALSET_PM_BBR);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to enable powersaving for M10 GPS BBR.\n");
-                }
-
-                delay(250);
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_ITFM_RAM), _message_VALSET_ITFM_RAM);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to enable Jamming detection M10 GPS RAM.\n");
-                }
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_ITFM_BBR), _message_VALSET_ITFM_BBR);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to enable Jamming detection M10 GPS BBR.\n");
-                }
-
-                // Here is where the init commands should go to do further M10 initialization.
-                delay(250);
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_SBAS_RAM), _message_VALSET_DISABLE_SBAS_RAM);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable SBAS M10 GPS RAM.\n");
-                }
-                delay(750); // will cause a receiver restart so wait a bit
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_SBAS_BBR), _message_VALSET_DISABLE_SBAS_BBR);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to disable SBAS M10 GPS BBR.\n");
-                }
-                delay(750); // will cause a receiver restart so wait a bit
-                // Done with initialization, Now enable wanted NMEA messages in BBR layer so they will survive a periodic sleep.
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_ENABLE_NMEA_BBR), _message_VALSET_ENABLE_NMEA_BBR);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to enable messages for M10 GPS BBR.\n");
-                }
-                delay(250);
-                // Next enable wanted NMEA messages in RAM layer
-                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_ENABLE_NMEA_RAM), _message_VALSET_ENABLE_NMEA_RAM);
-                _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
-                    LOG_WARN("Unable to enable messages for M10 GPS RAM.\n");
-                }
-                // As the M10 has no flash, the best we can do to preserve the config is to set it in RAM and BBR.
-                // BBR will survive a restart, and power off for a while, but modules with small backup
-                // batteries or super caps will not retain the config for a long power off time.
+                SEND_UBX_PACKET(0x06, 0x11, _message_CFG_RXM_PSM, "Unable to enable powersaving mode for GPS.\n", 500);
+                SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "Unable to enable powersaving details for GPS.\n", 500);
             }
+
             msglen = makeUBXPacket(0x06, 0x09, sizeof(_message_SAVE), _message_SAVE);
             _serial_gps->write(UBXscratch, msglen);
             if (getACK(0x06, 0x09, 2000) != GNSS_RESPONSE_OK) {
@@ -788,6 +622,55 @@ bool GPS::setup()
             } else {
                 LOG_INFO("GNSS module configuration saved!\n");
             }
+        } else if (gnssModel == GNSS_MODEL_UBLOX10) {
+            delay(1000);
+            clearBuffer();
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_DISABLE_NMEA_RAM, "Unable to disable NMEA messages in M10 RAM.\n", 300);
+            delay(750);
+            clearBuffer();
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_DISABLE_NMEA_BBR, "Unable to disable NMEA messages in M10 BBR.\n", 300);
+            delay(750);
+            clearBuffer();
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_DISABLE_TXT_INFO_RAM,
+                            "Unable to disable Info messages for M10 GPS RAM.\n", 300);
+            delay(750);
+            // Next disable Info txt messages in BBR layer
+            clearBuffer();
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_DISABLE_TXT_INFO_BBR,
+                            "Unable to disable Info messages for M10 GPS BBR.\n", 300);
+            delay(750);
+            // Do M10 configuration for Power Management.
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_PM_RAM, "Unable to enable powersaving for M10 GPS RAM.\n", 300);
+            delay(750);
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_PM_BBR, "Unable to enable powersaving for M10 GPS BBR.\n", 300);
+            delay(750);
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_ITFM_RAM, "Unable to enable Jamming detection M10 GPS RAM.\n", 300);
+            delay(750);
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_ITFM_BBR, "Unable to enable Jamming detection M10 GPS BBR.\n", 300);
+            delay(750);
+            // Here is where the init commands should go to do further M10 initialization.
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_DISABLE_SBAS_RAM, "Unable to disable SBAS M10 GPS RAM.\n", 300);
+            delay(750); // will cause a receiver restart so wait a bit
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_DISABLE_SBAS_BBR, "Unable to disable SBAS M10 GPS BBR.\n", 300);
+            delay(750); // will cause a receiver restart so wait a bit
+
+            // Done with initialization, Now enable wanted NMEA messages in BBR layer so they will survive a periodic sleep.
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_ENABLE_NMEA_BBR, "Unable to enable messages for M10 GPS BBR.\n", 300);
+            delay(750);
+            // Next enable wanted NMEA messages in RAM layer
+            SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_ENABLE_NMEA_RAM, "Unable to enable messages for M10 GPS RAM.\n", 500);
+            delay(750);
+
+            // As the M10 has no flash, the best we can do to preserve the config is to set it in RAM and BBR.
+            // BBR will survive a restart, and power off for a while, but modules with small backup
+            // batteries or super caps will not retain the config for a long power off time.
+            msglen = makeUBXPacket(0x06, 0x09, sizeof(_message_SAVE_10), _message_SAVE_10);
+            _serial_gps->write(UBXscratch, msglen);
+            if (getACK(0x06, 0x09, 2000) != GNSS_RESPONSE_OK) {
+                LOG_WARN("Unable to save GNSS module configuration.\n");
+            } else {
+                LOG_INFO("GNSS module configuration saved!\n");
+            }
         }
         didSerialInit = true;
     }
@@ -875,16 +758,8 @@ void GPS::writePinEN(bool on)
     if (HW_VENDOR == meshtastic_HardwareModel_RAK4631 && (rotaryEncoderInterruptImpl1 || upDownInterruptImpl1))
         return;
 
-    // Abort: if pin unset
-    if (!en_gpio)
-        return;
-
-    // Determine new value for the pin
-    bool val = GPS_EN_ACTIVE ? on : !on;
-
     // Write and log
-    pinMode(en_gpio, OUTPUT);
-    digitalWrite(en_gpio, val);
+    enablePin->set(on);
 #ifdef GPS_EXTRAVERBOSE
     LOG_DEBUG("Pin EN %s\n", val == HIGH ? "HIGH" : "LOW");
 #endif
@@ -951,7 +826,8 @@ void GPS::setPowerPMU(bool on)
 void GPS::setPowerUBLOX(bool on, uint32_t sleepMs)
 {
     // Abort: if not UBLOX hardware
-    if (gnssModel != GNSS_MODEL_UBLOX)
+    if (!(gnssModel == GNSS_MODEL_UBLOX6 || gnssModel == GNSS_MODEL_UBLOX7 || gnssModel == GNSS_MODEL_UBLOX8 ||
+          gnssModel == GNSS_MODEL_UBLOX9 || gnssModel == GNSS_MODEL_UBLOX10))
         return;
 
     // If waking
@@ -974,7 +850,7 @@ void GPS::setPowerUBLOX(bool on, uint32_t sleepMs)
         }
 
         // Determine hardware version
-        if (strncmp(info.hwVersion, "000A0000", 8) != 0) {
+        if (gnssModel == GNSS_MODEL_UBLOX10) {
             // Encode the sleep time in millis into the packet
             for (int i = 0; i < 4; i++)
                 gps->_message_PMREQ[0 + i] = sleepMs >> (i * 8);
@@ -1026,14 +902,16 @@ void GPS::down()
     LOG_DEBUG("%us until next search\n", sleepTime / 1000);
 
     // If update interval less than 10 seconds, no attempt to sleep
-    if (updateInterval <= 10 * 1000UL)
+    if (updateInterval <= 10 * 1000UL || sleepTime == 0)
         setPowerState(GPS_IDLE);
 
     else {
         // Check whether the GPS hardware is capable of GPS_SOFTSLEEP
         // If not, fallback to GPS_HARDSLEEP instead
         bool softsleepSupported = false;
-        if (gnssModel == GNSS_MODEL_UBLOX) // U-blox is supported via PMREQ
+        // U-blox is supported via PMREQ
+        if (gnssModel == GNSS_MODEL_UBLOX6 || gnssModel == GNSS_MODEL_UBLOX7 || gnssModel == GNSS_MODEL_UBLOX8 ||
+            gnssModel == GNSS_MODEL_UBLOX9 || gnssModel == GNSS_MODEL_UBLOX10)
             softsleepSupported = true;
 #ifdef PIN_GPS_STANDBY // L76B, L76K and clones have a standby pin
         softsleepSupported = true;
@@ -1108,7 +986,9 @@ int32_t GPS::runOnce()
         // if we have received valid NMEA claim we are connected
         setConnected();
     } else {
-        if ((config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) && (gnssModel == GNSS_MODEL_UBLOX)) {
+        if ((config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) &&
+            (gnssModel == GNSS_MODEL_UBLOX6 || gnssModel == GNSS_MODEL_UBLOX7 || gnssModel == GNSS_MODEL_UBLOX8 ||
+             gnssModel == GNSS_MODEL_UBLOX9 || gnssModel == GNSS_MODEL_UBLOX10)) {
             // reset the GPS on next bootup
             if (devicestate.did_gps_reset && scheduling.elapsedSearchMs() > 60 * 1000UL && !hasFlow()) {
                 LOG_DEBUG("GPS is not communicating, trying factory reset on next bootup.\n");
@@ -1191,25 +1071,31 @@ int GPS::prepareDeepSleep(void *unused)
     return 0;
 }
 
+#define PROBE_SIMPLE(CHIP, TOWRITE, RESPONSE, DRIVER, TIMEOUT, ...)                                                              \
+    LOG_DEBUG("Trying " TOWRITE " (" CHIP ") ...\n");                                                                            \
+    clearBuffer();                                                                                                               \
+    _serial_gps->write(TOWRITE "\r\n");                                                                                          \
+    if (getACK(RESPONSE, TIMEOUT) == GNSS_RESPONSE_OK) {                                                                         \
+        LOG_INFO(CHIP " detected, using " #DRIVER " Module\n");                                                                  \
+        return DRIVER;                                                                                                           \
+    }
+
 GnssModel_t GPS::probe(int serialSpeed)
 {
-#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)
+#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
     _serial_gps->end();
     _serial_gps->begin(serialSpeed);
+#elif defined(ARCH_RP2040)
+    _serial_gps->end();
+    _serial_gps->setFIFOSize(256);
+    _serial_gps->begin(serialSpeed);
 #else
     if (_serial_gps->baudRate() != serialSpeed) {
         LOG_DEBUG("Setting Baud to %i\n", serialSpeed);
         _serial_gps->updateBaudRate(serialSpeed);
     }
 #endif
-#ifdef GNSS_AIROHA
-    return GNSS_MODEL_AG3335;
-#endif
-#ifdef GPS_DEBUG
-    for (int i = 0; i < 20; i++) {
-        getACK("$GP", 200);
-    }
-#endif
+
     memset(&info, 0, sizeof(struct uBloxGnssModelInfo));
     uint8_t buffer[768] = {0};
     delay(100);
@@ -1218,70 +1104,29 @@ GnssModel_t GPS::probe(int serialSpeed)
     _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
     delay(20);
 
-    // get version information from Unicore UFirebirdII Series
-    // Works for: UC6580, UM620, UM621, UM670A, UM680A, or UM681A
-    _serial_gps->write("$PDTINFO\r\n");
-    delay(750);
-    if (getACK("UC6580", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("UC6580 detected, using UC6580 Module\n");
-        return GNSS_MODEL_UC6580;
-    }
-
-    clearBuffer();
-    _serial_gps->write("$PDTINFO\r\n");
-    delay(750);
-    if (getACK("UM600", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("UM600 detected, using UC6580 Module\n");
-        return GNSS_MODEL_UC6580;
-    }
-
-    // Get version information for ATGM336H
-    clearBuffer();
-    _serial_gps->write("$PCAS06,1*1A\r\n");
-    if (getACK("$GPTXT,01,01,02,HW=ATGM336H", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("ATGM336H GNSS init succeeded, using ATGM336H Module\n");
-        return GNSS_MODEL_ATGM336H;
-    }
-
+    // Unicore UFirebirdII Series: UC6580, UM620, UM621, UM670A, UM680A, or UM681A
+    PROBE_SIMPLE("UC6580", "$PDTINFO", "UC6580", GNSS_MODEL_UC6580, 500);
+    PROBE_SIMPLE("UM600", "$PDTINFO", "UM600", GNSS_MODEL_UC6580, 500);
+    PROBE_SIMPLE("ATGM336H", "$PCAS06,1*1A", "$GPTXT,01,01,02,HW=ATGM336H", GNSS_MODEL_ATGM336H, 500);
     /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS))
     based on AT6558 */
-    clearBuffer();
-    _serial_gps->write("$PCAS06,1*1A\r\n");
-    if (getACK("$GPTXT,01,01,02,HW=ATGM332D", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("ATGM332D detected, using ATGM336H Module\n");
-        return GNSS_MODEL_ATGM336H;
-    }
+    PROBE_SIMPLE("ATGM332D", "$PCAS06,1*1A", "$GPTXT,01,01,02,HW=ATGM332D", GNSS_MODEL_ATGM336H, 500);
 
     /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
-    clearBuffer();
-    _serial_gps->write("PAIR020*38\r\n");
-    if (getACK("$PAIR020,AG3335", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("Aioha AG3335 detected, using AG3335 Module\n");
-        return GNSS_MODEL_AG3335;
-    }
-    // Get version information for Airoha AG3335
-    clearBuffer();
-    _serial_gps->write("$PMTK605*31\r\n");
+    _serial_gps->write("$PAIR062,2,0*3C\r\n"); // GSA OFF to reduce volume
+    _serial_gps->write("$PAIR062,3,0*3D\r\n"); // GSV OFF to reduce volume
+    _serial_gps->write("$PAIR513*3D\r\n");     // save configuration
+    PROBE_SIMPLE("AG3335", "$PAIR021*39", "$PAIR021,AG3335", GNSS_MODEL_AG3335, 500);
+    PROBE_SIMPLE("AG3352", "$PAIR021*39", "$PAIR021,AG3352", GNSS_MODEL_AG3352, 500);
+    PROBE_SIMPLE("LC86", "$PQTMVERNO*58", "$PQTMVERNO,LC86", GNSS_MODEL_AG3352, 500);
 
-    // Get version information
-    clearBuffer();
-    _serial_gps->write("$PCAS06,0*1B\r\n");
-    if (getACK("$GPTXT,01,01,02,SW=", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("L76K GNSS init succeeded, using L76K GNSS Module\n");
-        return GNSS_MODEL_MTK;
-    }
+    PROBE_SIMPLE("L76K", "$PCAS06,0*1B", "$GPTXT,01,01,02,SW=", GNSS_MODEL_MTK, 500);
 
     // Close all NMEA sentences, valid for L76B MTK platform (Waveshare Pico GPS)
     _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
     delay(20);
 
-    // Get version information
-    clearBuffer();
-    _serial_gps->write("$PMTK605*31\r\n");
-    if (getACK("Quectel-L76B", 500) == GNSS_RESPONSE_OK) {
-        LOG_INFO("L76B GNSS init succeeded, using L76B GNSS Module\n");
-        return GNSS_MODEL_MTK_L76B;
-    }
+    PROBE_SIMPLE("L76B", "$PMTK605*31", "Quectel-L76B", GNSS_MODEL_MTK_L76B, 500);
 
     uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
     UBXChecksum(cfg_rate, sizeof(cfg_rate));
@@ -1308,9 +1153,13 @@ GnssModel_t GPS::probe(int serialSpeed)
         _serial_gps->write(_message_prt, sizeof(_message_prt));
         delay(500);
         serialSpeed = 9600;
-#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)
+#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_STM32WL)
         _serial_gps->end();
         _serial_gps->begin(serialSpeed);
+#elif defined(ARCH_RP2040)
+        _serial_gps->end();
+        _serial_gps->setFIFOSize(256);
+        _serial_gps->begin(serialSpeed);
 #else
         _serial_gps->updateBaudRate(serialSpeed);
 #endif
@@ -1368,9 +1217,9 @@ GnssModel_t GPS::probe(int serialSpeed)
                 strncpy((char *)buffer, &(info.extension[i][4]), sizeof(buffer));
                 // LOG_DEBUG("GetModel:%s\n", (char *)buffer);
                 if (strlen((char *)buffer)) {
-                    LOG_INFO("UBlox GNSS probe succeeded, using UBlox %s GNSS Module\n", (char *)buffer);
+                    LOG_INFO("%s detected, using GNSS_MODEL_UBLOX\n", (char *)buffer);
                 } else {
-                    LOG_INFO("UBlox GNSS probe succeeded, using UBlox GNSS Module\n");
+                    LOG_INFO("Generic Ublox detected, using GNSS_MODEL_UBLOX\n");
                 }
             } else if (!strncmp(info.extension[i], "PROTVER", 7)) {
                 char *ptr = nullptr;
@@ -1385,9 +1234,20 @@ GnssModel_t GPS::probe(int serialSpeed)
                 }
             }
         }
+        if (strncmp(info.hwVersion, "00040007", 8) == 0) {
+            return GNSS_MODEL_UBLOX6;
+        } else if (strncmp(info.hwVersion, "00070000", 8) == 0) {
+            return GNSS_MODEL_UBLOX7;
+        } else if (strncmp(info.hwVersion, "00080000", 8) == 0) {
+            return GNSS_MODEL_UBLOX8;
+        } else if (strncmp(info.hwVersion, "00190000", 8) == 0) {
+            return GNSS_MODEL_UBLOX9;
+        } else if (strncmp(info.hwVersion, "000A0000", 8) == 0) {
+            return GNSS_MODEL_UBLOX10;
+        }
     }
 
-    return GNSS_MODEL_UBLOX;
+    return GNSS_MODEL_UNKNOWN;
 }
 
 GPS *GPS::createGps()
@@ -1421,7 +1281,20 @@ GPS *GPS::createGps()
     GPS *new_gps = new GPS;
     new_gps->rx_gpio = _rx_gpio;
     new_gps->tx_gpio = _tx_gpio;
-    new_gps->en_gpio = _en_gpio;
+
+    GpioVirtPin *virtPin = new GpioVirtPin();
+    new_gps->enablePin = virtPin; // Always at least populate a virtual pin
+    if (_en_gpio) {
+        GpioPin *p = new GpioHwPin(_en_gpio);
+
+        if (!GPS_EN_ACTIVE) { // Need to invert the pin before hardware
+            new GpioNotTransformer(
+                virtPin, p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio
+        } else {
+            new GpioUnaryTransformer(
+                virtPin, p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio
+        }
+    }
 
 #ifdef PIN_GPS_PPS
     // pulse per second
@@ -1458,6 +1331,9 @@ GPS *GPS::createGps()
         LOG_DEBUG("Using GPIO%d for GPS RX\n", new_gps->rx_gpio);
         LOG_DEBUG("Using GPIO%d for GPS TX\n", new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
+#elif defined(ARCH_RP2040)
+        _serial_gps->setFIFOSize(256);
+        _serial_gps->begin(GPS_BAUDRATE);
 #else
         _serial_gps->begin(GPS_BAUDRATE);
 #endif
@@ -1545,16 +1421,15 @@ bool GPS::lookForTime()
 
 #ifdef GNSS_AIROHA
     uint8_t fix = reader.fixQuality();
-    uint32_t now = millis();
     if (fix > 0) {
         if (lastFixStartMsec > 0) {
-            if ((now - lastFixStartMsec) < GPS_FIX_HOLD_TIME) {
+            if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
                 return false;
             } else {
                 clearBuffer();
             }
         } else {
-            lastFixStartMsec = now;
+            lastFixStartMsec = millis();
             return false;
         }
     } else {
@@ -1569,7 +1444,7 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
 (midnight UTC/GMT), not counting leap seconds (in ISO 8601: 1970-01-01T00:00:00Z).
 */
         struct tm t;
-        t.tm_sec = ti.second();
+        t.tm_sec = ti.second() + round(ti.age() / 1000);
         t.tm_min = ti.minute();
         t.tm_hour = ti.hour();
         t.tm_mday = d.day();
@@ -1577,8 +1452,8 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
         t.tm_year = d.year() - 1900;
         t.tm_isdst = false;
         if (t.tm_mon > -1) {
-            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d\n", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
-                      t.tm_sec);
+            LOG_DEBUG("NMEA GPS time %02d-%02d-%02d %02d:%02d:%02d age %d\n", d.year(), d.month(), t.tm_mday, t.tm_hour, t.tm_min,
+                      t.tm_sec, ti.age());
             perhapsSetRTC(RTCQualityGPS, t);
             return true;
         } else
@@ -1598,16 +1473,15 @@ bool GPS::lookForLocation()
 #ifdef GNSS_AIROHA
     if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
         uint8_t fix = reader.fixQuality();
-        uint32_t now = millis();
         if (fix > 0) {
             if (lastFixStartMsec > 0) {
-                if ((now - lastFixStartMsec) < GPS_FIX_HOLD_TIME) {
+                if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
                     return false;
                 } else {
                     clearBuffer();
                 }
             } else {
-                lastFixStartMsec = now;
+                lastFixStartMsec = millis();
                 return false;
             }
         } else {

src/gps/GPS.h

@@ -3,6 +3,7 @@
 #if !MESHTASTIC_EXCLUDE_GPS
 
 #include "GPSStatus.h"
+#include "GpioLogic.h"
 #include "Observer.h"
 #include "TinyGPS++.h"
 #include "concurrency/OSThread.h"
@@ -25,11 +26,16 @@ struct uBloxGnssModelInfo {
 typedef enum {
     GNSS_MODEL_ATGM336H,
     GNSS_MODEL_MTK,
-    GNSS_MODEL_UBLOX,
+    GNSS_MODEL_UBLOX6,
+    GNSS_MODEL_UBLOX7,
+    GNSS_MODEL_UBLOX8,
+    GNSS_MODEL_UBLOX9,
+    GNSS_MODEL_UBLOX10,
     GNSS_MODEL_UC6580,
     GNSS_MODEL_UNKNOWN,
     GNSS_MODEL_MTK_L76B,
-    GNSS_MODEL_AG3335
+    GNSS_MODEL_AG3335,
+    GNSS_MODEL_AG3352
 } GnssModel_t;
 
 typedef enum {
@@ -73,7 +79,6 @@ class GPS : private concurrency::OSThread
     uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
-    uint32_t en_gpio = 0;
 
     int speedSelect = 0;
     int probeTries = 2;
@@ -101,7 +106,7 @@ class GPS : private concurrency::OSThread
 
   public:
     /** If !NULL we will use this serial port to construct our GPS */
-#if defined(RPI_PICO_WAVESHARE)
+#if defined(ARCH_RP2040)
     static SerialUART *_serial_gps;
 #else
     static HardwareSerial *_serial_gps;
@@ -129,6 +134,7 @@ class GPS : private concurrency::OSThread
     static const uint8_t _message_GGA[];
     static const uint8_t _message_PMS[];
     static const uint8_t _message_SAVE[];
+    static const uint8_t _message_SAVE_10[];
 
     // VALSET Commands for M10
     static const uint8_t _message_VALSET_PM[];
@@ -152,6 +158,13 @@ class GPS : private concurrency::OSThread
 
     meshtastic_Position p = meshtastic_Position_init_default;
 
+    /** This is normally bound to config.position.gps_en_gpio but some rare boards (like heltec tracker) need more advanced
+     * implementations. Those boards will set this public variable to a custom implementation.
+     *
+     * Normally set by GPS::createGPS()
+     */
+    GpioVirtPin *enablePin = NULL;
+
     GPS() : concurrency::OSThread("GPS") {}
 
     virtual ~GPS();
@@ -290,7 +303,6 @@ class GPS : private concurrency::OSThread
     virtual int32_t runOnce() override;
 
     // Get GNSS model
-    String getNMEA();
     GnssModel_t probe(int serialSpeed);
 
     // delay counter to allow more sats before fixed position stops GPS thread
@@ -303,4 +315,4 @@ class GPS : private concurrency::OSThread
 };
 
 extern GPS *gps;
-#endif // Exclude GPS
+#endif // Exclude GPS

src/gps/RTC.cpp

@@ -2,6 +2,7 @@
 #include "configuration.h"
 #include "detect/ScanI2C.h"
 #include "main.h"
+#include <Throttle.h>
 #include <sys/time.h>
 #include <time.h>
 
@@ -29,7 +30,7 @@ void readFromRTC()
     if (rtc_found.address == RV3028_RTC) {
         uint32_t now = millis();
         Melopero_RV3028 rtc;
-#ifdef I2C_SDA1
+#if WIRE_INTERFACES_COUNT == 2
         rtc.initI2C(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
 #else
         rtc.initI2C();
@@ -43,7 +44,10 @@ void readFromRTC()
         t.tm_sec = rtc.getSecond();
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-        LOG_DEBUG("Read RTC time from RV3028 as %ld\n", tv.tv_sec);
+
+        uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+        LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t.tm_year + 1900, t.tm_mon + 1,
+                  t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
@@ -55,7 +59,7 @@ void readFromRTC()
         uint32_t now = millis();
         PCF8563_Class rtc;
 
-#ifdef I2C_SDA1
+#if WIRE_INTERFACES_COUNT == 2
         rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
 #else
         rtc.begin();
@@ -71,7 +75,10 @@ void readFromRTC()
         t.tm_sec = tc.second;
         tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
-        LOG_DEBUG("Read RTC time from PCF8563 as %ld\n", tv.tv_sec);
+
+        uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+        LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t.tm_year + 1900,
+                  t.tm_mon + 1, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
@@ -81,7 +88,8 @@ void readFromRTC()
 #else
     if (!gettimeofday(&tv, NULL)) {
         uint32_t now = millis();
-        LOG_DEBUG("Read RTC time as %ld\n", tv.tv_sec);
+        uint32_t printableEpoch = tv.tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+        LOG_DEBUG("Read RTC time as %ld\n", printableEpoch);
         timeStartMsec = now;
         zeroOffsetSecs = tv.tv_sec;
     }
@@ -101,6 +109,13 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 {
     static uint32_t lastSetMsec = 0;
     uint32_t now = millis();
+    uint32_t printableEpoch = tv->tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms
+#ifdef BUILD_EPOCH
+    if (tv->tv_sec < BUILD_EPOCH) {
+        LOG_WARN("Ignoring time (%ld) before build epoch (%ld)!\n", printableEpoch, BUILD_EPOCH);
+        return false;
+    }
+#endif
 
     bool shouldSet;
     if (forceUpdate) {
@@ -110,10 +125,13 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
     } else if (q > currentQuality) {
         shouldSet = true;
         LOG_DEBUG("Upgrading time to quality %s\n", RtcName(q));
-    } else if (q >= RTCQualityNTP && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
-        // Every 12 hrs we will slam in a new GPS or Phone GPS / NTP time, to correct for local RTC clock drift
+    } else if (q == RTCQualityGPS) {
         shouldSet = true;
-        LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", tv->tv_sec);
+        LOG_DEBUG("Reapplying GPS time: %ld secs\n", printableEpoch);
+    } else if (q == RTCQualityNTP && !Throttle::isWithinTimespanMs(lastSetMsec, (12 * 60 * 60 * 1000UL))) {
+        // Every 12 hrs we will slam in a new NTP or Phone GPS / NTP time, to correct for local RTC clock drift
+        shouldSet = true;
+        LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", printableEpoch);
     } else {
         shouldSet = false;
         LOG_DEBUG("Current RTC quality: %s. Ignoring time of RTC quality of %s\n", RtcName(currentQuality), RtcName(q));
@@ -133,29 +151,29 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 #ifdef RV3028_RTC
         if (rtc_found.address == RV3028_RTC) {
             Melopero_RV3028 rtc;
-#ifdef I2C_SDA1
+#if WIRE_INTERFACES_COUNT == 2
             rtc.initI2C(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
 #else
             rtc.initI2C();
 #endif
             tm *t = gmtime(&tv->tv_sec);
             rtc.setTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
-            LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
-                      t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
+            LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
+                      t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
         }
 #elif defined(PCF8563_RTC)
         if (rtc_found.address == PCF8563_RTC) {
             PCF8563_Class rtc;
 
-#ifdef I2C_SDA1
+#if WIRE_INTERFACES_COUNT == 2
             rtc.begin(rtc_found.port == ScanI2C::I2CPort::WIRE1 ? Wire1 : Wire);
 #else
             rtc.begin();
 #endif
             tm *t = gmtime(&tv->tv_sec);
             rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
-            LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
-                      t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
+            LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)\n", t->tm_year + 1900, t->tm_mon + 1,
+                      t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec, printableEpoch);
         }
 #elif defined(ARCH_ESP32)
         settimeofday(tv, NULL);
@@ -272,4 +290,4 @@ time_t gm_mktime(struct tm *tm)
 #else
     return mktime(tm);
 #endif
-}
+}

src/gps/ubx.h

@@ -1,3 +1,10 @@
+#define SEND_UBX_PACKET(TYPE, ID, DATA, ERRMSG, TIMEOUT)                                                                         \
+    msglen = makeUBXPacket(TYPE, ID, sizeof(DATA), DATA);                                                                        \
+    _serial_gps->write(UBXscratch, msglen);                                                                                      \
+    if (getACK(TYPE, ID, TIMEOUT) != GNSS_RESPONSE_OK) {                                                                         \
+        LOG_WARN(#ERRMSG);                                                                                                       \
+    }
+
 // Power Management
 
 uint8_t GPS::_message_PMREQ[] PROGMEM = {
@@ -316,6 +323,13 @@ const uint8_t GPS::_message_SAVE[] = {
     0x17                    // deviceMask: BBR, Flash, EEPROM, and SPI Flash
 };
 
+const uint8_t GPS::_message_SAVE_10[] = {
+    0x00, 0x00, 0x00, 0x00, // clearMask: no sections cleared
+    0xFF, 0xFF, 0x00, 0x00, // saveMask: save all sections
+    0x00, 0x00, 0x00, 0x00, // loadMask: no sections loaded
+    0x01                    // deviceMask: only save to BBR
+};
+
 // As the M10 has no flash, the best we can do to preserve the config is to set it in RAM and BBR.
 // BBR will survive a restart, and power off for a while, but modules with small backup
 // batteries or super caps will not retain the config for a long power off time.
@@ -335,36 +349,36 @@ const uint8_t GPS::_message_SAVE[] = {
 // has details on low-power modes
 
 /*
-CFG-PM2 has been replaced by many CFG-PM commands
-CFG-PMS has been removed
-
-CFG-PM-OPERATEMODE E1 (0 | 1 | 2) -> 1 (PSMOO), because sporadic position updates are required instead of continous tracking <10s
-(PSMCT) CFG-PM-POSUPDATEPERIOD U4 -> 0ms, no self-timed wakup because receiver power mode is controlled via "software standby
-mode" by legacy UBX-RXM-PMREQ request CFG-PM-ACQPERIOD U4 -> 0ms, because receiver power mode is controlled via "software standby
-mode" by legacy UBX-RXM-PMREQ request CFG-PM-ONTIME U4 -> 0ms, optional I guess CFG-PM-EXTINTBACKUP L -> 1, force receiver into
-BACKUP mode when EXTINT (should be connected to GPS_EN_PIN) pin is "low"
-
-This is required because the receiver never enters low power mode if microcontroller is in deep-sleep.
-Maybe the changing UART_RX levels trigger a wakeup but even with UBX-RXM-PMREQ[12] = 0x00 (all external wakeup sources disabled)
-the receivcer remains in aquisition state -> potentially a bug
-
-Workaround: Control the EXTINT pin by the GPS_EN_PIN signal
-
-As mentioned in the M10 operational issues down below, power save won't allow the use of BDS B1C.
-CFG-SIGNAL-BDS_B1C_ENA L -> 0
+OPERATEMODE E1 2 (0 | 1 | 2)
+POSUPDATEPERIOD U4 5
+ACQPERIOD U4 10
+GRIDOFFSET U4 0
+ONTIME U2 1
+MINACQTIME U1 0
+MAXACQTIME U1 0
+DONOTENTEROFF L 1
+WAITTIMEFIX  L 1
+UPDATEEPH L 1
+EXTINTWAKE L 0 no ext ints
+EXTINTBACKUP L 0 no ext ints
+EXTINTINACTIVE L 0 no ext ints
+EXTINTACTIVITY U4 0 no ext ints
+LIMITPEAKCURRENT L 1
 
 // Ram layer config message:
-// 01 01 00 00 01 00 D0 20 01 02 00 D0 40 00 00 00 00 03 00 D0 40 00 00 00 00 05 00 D0 30 00 00 0D 00 D0 10 01
+// b5 62 06 8a 26 00 00 01 00 00 01 00 d0 20 02 02 00 d0 40 05 00 00 00 05 00 d0 30 01 00 08 00 d0 10 01 09 00 d0 10 01 10 00 d0
+// 10 01 8b de
 
 // BBR layer config message:
-// 01 02 00 00 01 00 D0 20 01 02 00 D0 40 00 00 00 00 03 00 D0 40 00 00 00 00 05 00 D0 30 00 00 0D 00 D0 10 01
+// b5 62 06 8a 26 00 00 02 00 00 01 00 d0 20 02 02 00 d0 40 05 00 00 00 05 00 d0 30 01 00 08 00 d0 10 01 09 00 d0 10 01 10 00 d0
+// 10 01 8c 03
 */
-const uint8_t GPS::_message_VALSET_PM_RAM[] = {0x01, 0x01, 0x00, 0x00, 0x0F, 0x00, 0x31, 0x10, 0x00, 0x01, 0x00, 0xD0, 0x20, 0x01,
-                                               0x02, 0x00, 0xD0, 0x40, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0xD0, 0x40, 0x00, 0x00,
-                                               0x00, 0x00, 0x05, 0x00, 0xD0, 0x30, 0x00, 0x00, 0x0D, 0x00, 0xD0, 0x10, 0x01};
-const uint8_t GPS::_message_VALSET_PM_BBR[] = {0x01, 0x02, 0x00, 0x00, 0x0F, 0x00, 0x31, 0x10, 0x00, 0x01, 0x00, 0xD0, 0x20, 0x01,
-                                               0x02, 0x00, 0xD0, 0x40, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0xD0, 0x40, 0x00, 0x00,
-                                               0x00, 0x00, 0x05, 0x00, 0xD0, 0x30, 0x00, 0x00, 0x0D, 0x00, 0xD0, 0x10, 0x01};
+const uint8_t GPS::_message_VALSET_PM_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0xd0, 0x20, 0x02, 0x02, 0x00, 0xd0, 0x40,
+                                               0x05, 0x00, 0x00, 0x00, 0x05, 0x00, 0xd0, 0x30, 0x01, 0x00, 0x08, 0x00, 0xd0,
+                                               0x10, 0x01, 0x09, 0x00, 0xd0, 0x10, 0x01, 0x10, 0x00, 0xd0, 0x10, 0x01};
+const uint8_t GPS::_message_VALSET_PM_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x01, 0x00, 0xd0, 0x20, 0x02, 0x02, 0x00, 0xd0, 0x40,
+                                               0x05, 0x00, 0x00, 0x00, 0x05, 0x00, 0xd0, 0x30, 0x01, 0x00, 0x08, 0x00, 0xd0,
+                                               0x10, 0x01, 0x09, 0x00, 0xd0, 0x10, 0x01, 0x10, 0x00, 0xd0, 0x10, 0x01};
 
 /*
 CFG-ITFM replaced by 5 valset messages which can be combined into one for RAM and one for BBR

src/graphics/EInkDisplay2.cpp

@@ -157,7 +157,7 @@ bool EInkDisplay::connect()
     }
 
 #elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213) ||             \
-    defined(HELTEC_VISION_MASTER_E290)
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER)
     {
         // Start HSPI
         hspi = new SPIClass(HSPI);

src/graphics/EInkDisplay2.h

@@ -68,7 +68,7 @@ class EInkDisplay : public OLEDDisplay
 
     // If display uses HSPI
 #if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
-    defined(HELTEC_VISION_MASTER_E290)
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER)
     SPIClass *hspi = NULL;
 #endif
 

src/graphics/EInkDynamicDisplay.cpp

@@ -1,3 +1,4 @@
+#include "Throttle.h"
 #include "configuration.h"
 
 #if defined(USE_EINK) && defined(USE_EINK_DYNAMICDISPLAY)
@@ -231,15 +232,13 @@ void EInkDynamicDisplay::checkForPromotion()
 // Is it too soon for another frame of this type?
 void EInkDynamicDisplay::checkRateLimiting()
 {
-    uint32_t now = millis();
-
     // Sanity check: millis() overflow - just let the update run..
-    if (previousRunMs > now)
+    if (previousRunMs > millis())
         return;
 
     // Skip update: too soon for BACKGROUND
     if (frameFlags == BACKGROUND) {
-        if (now - previousRunMs < EINK_LIMIT_RATE_BACKGROUND_SEC * 1000) {
+        if (Throttle::isWithinTimespanMs(previousRunMs, EINK_LIMIT_RATE_BACKGROUND_SEC * 1000)) {
             refresh = SKIPPED;
             reason = EXCEEDED_RATELIMIT_FULL;
             return;
@@ -252,7 +251,7 @@ void EInkDynamicDisplay::checkRateLimiting()
 
     // Skip update: too soon for RESPONSIVE
     if (frameFlags & RESPONSIVE) {
-        if (now - previousRunMs < EINK_LIMIT_RATE_RESPONSIVE_SEC * 1000) {
+        if (Throttle::isWithinTimespanMs(previousRunMs, EINK_LIMIT_RATE_RESPONSIVE_SEC * 1000)) {
             refresh = SKIPPED;
             reason = EXCEEDED_RATELIMIT_FAST;
             LOG_DEBUG("refresh=SKIPPED, reason=EXCEEDED_RATELIMIT_FAST, frameFlags=0x%x\n", frameFlags);

src/graphics/Screen.cpp

@@ -22,6 +22,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "Screen.h"
 #include "../userPrefs.h"
 #include "PowerMon.h"
+#include "Throttle.h"
 #include "configuration.h"
 #if HAS_SCREEN
 #include <OLEDDisplay.h>
@@ -117,13 +118,14 @@ static bool heartbeat = false;
 #define SCREEN_HEIGHT display->getHeight()
 
 #include "graphics/ScreenFonts.h"
+#include <Throttle.h>
 
 #define getStringCenteredX(s) ((SCREEN_WIDTH - display->getStringWidth(s)) / 2)
 
 /// Check if the display can render a string (detect special chars; emoji)
 static bool haveGlyphs(const char *str)
 {
-#if defined(OLED_UA) || defined(OLED_RU)
+#if defined(OLED_PL) || defined(OLED_UA) || defined(OLED_RU)
     // Don't want to make any assumptions about custom language support
     return true;
 #endif
@@ -1093,7 +1095,8 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const NodeStat
 {
     char usersString[20];
     snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS)) &&                                                                               \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
     display->drawFastImage(x, y + 3, 8, 8, imgUser);
 #else
@@ -1284,8 +1287,8 @@ static int8_t prevFrame = -1;
 // Draw the arrow pointing to a node's location
 void Screen::drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t compassY, uint16_t compassDiam, float headingRadian)
 {
-    Point tip(0.0f, 0.5f), tail(0.0f, -0.5f); // pointing up initially
-    float arrowOffsetX = 0.2f, arrowOffsetY = 0.2f;
+    Point tip(0.0f, 0.5f), tail(0.0f, -0.35f); // pointing up initially
+    float arrowOffsetX = 0.14f, arrowOffsetY = 1.0f;
     Point leftArrow(tip.x - arrowOffsetX, tip.y - arrowOffsetY), rightArrow(tip.x + arrowOffsetX, tip.y - arrowOffsetY);
 
     Point *arrowPoints[] = {&tip, &tail, &leftArrow, &rightArrow};
@@ -1295,9 +1298,19 @@ void Screen::drawNodeHeading(OLEDDisplay *display, int16_t compassX, int16_t com
         arrowPoints[i]->scale(compassDiam * 0.6);
         arrowPoints[i]->translate(compassX, compassY);
     }
+    /* Old arrow
     display->drawLine(tip.x, tip.y, tail.x, tail.y);
     display->drawLine(leftArrow.x, leftArrow.y, tip.x, tip.y);
     display->drawLine(rightArrow.x, rightArrow.y, tip.x, tip.y);
+    display->drawLine(leftArrow.x, leftArrow.y, tail.x, tail.y);
+    display->drawLine(rightArrow.x, rightArrow.y, tail.x, tail.y);
+    */
+#ifdef USE_EINK
+    display->drawTriangle(tip.x, tip.y, rightArrow.x, rightArrow.y, tail.x, tail.y);
+#else
+    display->fillTriangle(tip.x, tip.y, rightArrow.x, rightArrow.y, tail.x, tail.y);
+#endif
+    display->drawTriangle(tip.x, tip.y, leftArrow.x, leftArrow.y, tail.x, tail.y);
 }
 
 // Get a string representation of the time passed since something happened
@@ -1335,22 +1348,27 @@ void Screen::drawCompassNorth(OLEDDisplay *display, int16_t compassX, int16_t co
     // If north is supposed to be at the top of the compass we want rotation to be +0
     if (config.display.compass_north_top)
         myHeading = -0;
-
-    Point N1(-0.04f, 0.65f), N2(0.04f, 0.65f);
+    /* N sign points currently not deleted*/
+    Point N1(-0.04f, 0.65f), N2(0.04f, 0.65f); // N sign points (N1-N4)
     Point N3(-0.04f, 0.55f), N4(0.04f, 0.55f);
-    Point *rosePoints[] = {&N1, &N2, &N3, &N4};
+    Point NC1(0.00f, 0.50f); // north circle center point
+    Point *rosePoints[] = {&N1, &N2, &N3, &N4, &NC1};
 
     uint16_t compassDiam = Screen::getCompassDiam(SCREEN_WIDTH, SCREEN_HEIGHT);
 
-    for (int i = 0; i < 4; i++) {
+    for (int i = 0; i < 5; i++) {
         // North on compass will be negative of heading
         rosePoints[i]->rotate(-myHeading);
         rosePoints[i]->scale(compassDiam);
         rosePoints[i]->translate(compassX, compassY);
     }
+
+    /* changed the N sign to a small circle on the compass circle.
     display->drawLine(N1.x, N1.y, N3.x, N3.y);
     display->drawLine(N2.x, N2.y, N4.x, N4.y);
     display->drawLine(N1.x, N1.y, N4.x, N4.y);
+    */
+    display->drawCircle(NC1.x, NC1.y, 4); // North sign circle, 4px radius is sufficient for all displays.
 }
 
 uint16_t Screen::getCompassDiam(uint32_t displayWidth, uint32_t displayHeight)
@@ -1514,7 +1532,8 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS)
+#elif defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) || defined(RAK14014) ||          \
+    defined(HX8357_CS)
     dispdev = new TFTDisplay(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
 #elif defined(USE_EINK) && !defined(USE_EINK_DYNAMICDISPLAY)
@@ -1653,6 +1672,11 @@ void Screen::setup()
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
+#if defined(USE_ST7789) && defined(TFT_MESH)
+    // Heltec T114 and T190: honor a custom text color, if defined in variant.h
+    static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
+#endif
+
     // Initialising the UI will init the display too.
     ui->init();
 
@@ -1706,8 +1730,11 @@ void Screen::setup()
     // Standard behaviour is to FLIP the screen (needed on T-Beam). If this config item is set, unflip it, and thereby logically
     // flip it. If you have a headache now, you're welcome.
     if (!config.display.flip_screen) {
-#if defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(RAK14014) || defined(HX8357_CS)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7789_CS) ||           \
+    defined(RAK14014) || defined(HX8357_CS)
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
+#elif defined(USE_ST7789)
+        static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
 #else
         dispdev->flipScreenVertically();
 #endif
@@ -1765,6 +1792,11 @@ void Screen::forceDisplay(bool forceUiUpdate)
 #ifdef USE_EINK
     // If requested, make sure queued commands are run, and UI has rendered a new frame
     if (forceUiUpdate) {
+        // Force a display refresh, in addition to the UI update
+        // Changing the GPS status bar icon apparently doesn't register as a change in image
+        // (False negative of the image hashing algorithm used to skip identical frames)
+        EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST);
+
         // No delay between UI frame rendering
         setFastFramerate();
 
@@ -1919,7 +1951,7 @@ int32_t Screen::runOnce()
     if (showingNormalScreen) {
         // standard screen loop handling here
         if (config.display.auto_screen_carousel_secs > 0 &&
-            (millis() - lastScreenTransition) > (config.display.auto_screen_carousel_secs * 1000)) {
+            !Throttle::isWithinTimespanMs(lastScreenTransition, config.display.auto_screen_carousel_secs * 1000)) {
 
 // If an E-Ink display struggles with fast refresh, force carousel to use full refresh instead
 // Carousel is potentially a major source of E-Ink display wear
@@ -2412,9 +2444,10 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     // Draw our hardware ID to assist with bluetooth pairing. Either prefix with Info or S&F Logo
     if (moduleConfig.store_forward.enabled) {
 #ifdef ARCH_ESP32
-        if (millis() - storeForwardModule->lastHeartbeat >
-            (storeForwardModule->heartbeatInterval * 1200)) { // no heartbeat, overlap a bit
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+        if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
+                                          (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS)) &&                                                                               \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                    imgQuestionL1);
@@ -2425,7 +2458,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                                    imgQuestion);
 #endif
         } else {
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS)) &&                                                                               \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8,
                                    imgSFL1);
@@ -2439,8 +2473,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #endif
     } else {
         // TODO: Raspberry Pi supports more than just the one screen size
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS) ||           \
-     ARCH_PORTDUINO) &&                                                                                                          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                                                             \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -2746,4 +2780,4 @@ int Screen::handleAdminMessage(const meshtastic_AdminMessage *arg)
 } // namespace graphics
 #else
 graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/Screen.h

@@ -309,7 +309,7 @@ class Screen : public concurrency::OSThread
     static char customFontTableLookup(const uint8_t ch)
     {
         // UTF-8 to font table index converter
-        // Code form http://playground.arduino.cc/Main/Utf8ascii
+        // Code from http://playground.arduino.cc/Main/Utf8ascii
         static uint8_t LASTCHAR;
         static bool SKIPREST; // Only display a single unconvertable-character symbol per sequence of unconvertable characters
 
@@ -322,11 +322,57 @@ class Screen : public concurrency::OSThread
         uint8_t last = LASTCHAR; // get last char
         LASTCHAR = ch;
 
-        switch (last) { // conversion depending on first UTF8-character
+        switch (last) {
         case 0xC2: {
             SKIPREST = false;
             return (uint8_t)ch;
         }
+        }
+
+        // We want to strip out prefix chars for two-byte char formats
+        if (ch == 0xC2)
+            return (uint8_t)0;
+
+#if defined(OLED_PL)
+
+        switch (last) {
+        case 0xC3: {
+
+            if (ch == 147)
+                return (uint8_t)(ch); // Ó
+            else if (ch == 179)
+                return (uint8_t)(148); // ó
+            else
+                return (uint8_t)(ch | 0xC0);
+            break;
+        }
+
+        case 0xC4: {
+            SKIPREST = false;
+            return (uint8_t)(ch);
+        }
+
+        case 0xC5: {
+            SKIPREST = false;
+            if (ch == 132)
+                return (uint8_t)(136); // ń
+            else if (ch == 186)
+                return (uint8_t)(137); // ź
+            else
+                return (uint8_t)(ch);
+            break;
+        }
+        }
+
+        // We want to strip out prefix chars for two-byte char formats
+        if (ch == 0xC2 || ch == 0xC3 || ch == 0xC4 || ch == 0xC5)
+            return (uint8_t)0;
+
+#endif
+
+#if defined(OLED_UA) || defined(OLED_RU)
+
+        switch (last) {
         case 0xC3: {
             SKIPREST = false;
             return (uint8_t)(ch | 0xC0);
@@ -376,6 +422,8 @@ class Screen : public concurrency::OSThread
         if (ch == 0xC2 || ch == 0xC3 || ch == 0x82 || ch == 0xD0 || ch == 0xD1)
             return (uint8_t)0;
 
+#endif
+
         // If we already returned an unconvertable-character symbol for this unconvertable-character sequence, return NULs for the
         // rest of it
         if (SKIPREST)

src/graphics/ScreenFonts.h

@@ -1,5 +1,9 @@
 #pragma once
 
+#ifdef OLED_PL
+#include "graphics/fonts/OLEDDisplayFontsPL.h"
+#endif
+
 #ifdef OLED_RU
 #include "graphics/fonts/OLEDDisplayFontsRU.h"
 #endif
@@ -8,13 +12,17 @@
 #include "graphics/fonts/OLEDDisplayFontsUA.h"
 #endif
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS)) &&                                                                               \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16  // Height: 19
 #define FONT_MEDIUM ArialMT_Plain_24 // Height: 28
 #define FONT_LARGE ArialMT_Plain_24  // Height: 28
 #else
+#ifdef OLED_PL
+#define FONT_SMALL ArialMT_Plain_10_PL
+#else
 #ifdef OLED_RU
 #define FONT_SMALL ArialMT_Plain_10_RU
 #else
@@ -24,6 +32,7 @@
 #define FONT_SMALL ArialMT_Plain_10 // Height: 13
 #endif
 #endif
+#endif
 #define FONT_MEDIUM ArialMT_Plain_16 // Height: 19
 #define FONT_LARGE ArialMT_Plain_24  // Height: 28
 #endif

src/graphics/TFTDisplay.cpp

@@ -21,10 +21,6 @@ extern SX1509 gpioExtender;
 #if defined(ST7735S)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
 
-#if defined(ST7735_BACKLIGHT_EN) && !defined(TFT_BL)
-#define TFT_BL ST7735_BACKLIGHT_EN
-#endif
-
 #ifndef TFT_INVERT
 #define TFT_INVERT true
 #endif
@@ -91,24 +87,20 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance.config(cfg);
         }
 
+#ifdef TFT_BL
         // Set the backlight control
         {
             auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
 
-#ifdef ST7735_BL_V03
-            cfg.pin_bl = ST7735_BL_V03;
-#elif defined(ST7735_BL_V05)
-            cfg.pin_bl = ST7735_BL_V05;
-#else
-            cfg.pin_bl = ST7735_BL; // Pin number to which the backlight is connected
-#endif
-            cfg.invert = true; // true to invert the brightness of the backlight
+            cfg.pin_bl = TFT_BL; // Pin number to which the backlight is connected
+            cfg.invert = true;   // true to invert the brightness of the backlight
             // cfg.freq = 44100;    // PWM frequency of backlight
             // cfg.pwm_channel = 1; // PWM channel number to use
 
             _light_instance.config(cfg);
             _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
         }
+#endif
 
         setPanel(&_panel_instance);
     }
@@ -131,10 +123,6 @@ static void rak14014_tpIntHandle(void)
 #elif defined(ST7789_CS)
 #include <LovyanGFX.hpp> // Graphics and font library for ST7735 driver chip
 
-#if defined(ST7789_BACKLIGHT_EN) && !defined(TFT_BL)
-#define TFT_BL ST7789_BACKLIGHT_EN
-#endif
-
 class LGFX : public lgfx::LGFX_Device
 {
     lgfx::Panel_ST7789 _panel_instance;
@@ -204,6 +192,7 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance.config(cfg);
         }
 
+#ifdef ST7789_BL
         // Set the backlight control. (delete if not necessary)
         {
             auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
@@ -215,6 +204,7 @@ class LGFX : public lgfx::LGFX_Device
             _light_instance.config(cfg);
             _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
         }
+#endif
 
 #if HAS_TOUCHSCREEN
         // Configure settings for touch screen control.
@@ -324,6 +314,7 @@ class LGFX : public lgfx::LGFX_Device
             _panel_instance.config(cfg);
         }
 
+#ifdef TFT_BL
         // Set the backlight control
         {
             auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
@@ -336,6 +327,7 @@ class LGFX : public lgfx::LGFX_Device
             _light_instance.config(cfg);
             _panel_instance.setLight(&_light_instance); // Set the backlight on the panel.
         }
+#endif
 
         setPanel(&_panel_instance);
     }
@@ -508,10 +500,126 @@ class LGFX : public lgfx::LGFX_Device
 
 static LGFX *tft = nullptr;
 
+#elif defined(ST7701_CS)
+#include <LovyanGFX.hpp> // Graphics and font library for ST7701 driver chip
+#include <lgfx/v1/platforms/esp32s3/Bus_RGB.hpp>
+#include <lgfx/v1/platforms/esp32s3/Panel_RGB.hpp>
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ST7701 _panel_instance;
+    lgfx::Bus_RGB _bus_instance;
+    lgfx::Light_PWM _light_instance;
+    lgfx::Touch_FT5x06 _touch_instance;
+
+  public:
+    LGFX(void)
+    {
+        {
+            auto cfg = _panel_instance.config();
+            cfg.memory_width = 800;
+            cfg.memory_height = 480;
+            cfg.panel_width = TFT_WIDTH;
+            cfg.panel_height = TFT_HEIGHT;
+            cfg.offset_x = TFT_OFFSET_X;
+            cfg.offset_y = TFT_OFFSET_Y;
+            _panel_instance.config(cfg);
+        }
+
+        {
+            auto cfg = _panel_instance.config_detail();
+            cfg.pin_cs = ST7701_CS;
+            cfg.pin_sclk = ST7701_SCK;
+            cfg.pin_mosi = ST7701_SDA;
+            // cfg.use_psram = 1;
+            _panel_instance.config_detail(cfg);
+        }
+
+        {
+            auto cfg = _bus_instance.config();
+            cfg.panel = &_panel_instance;
+#ifdef SENSECAP_INDICATOR
+            cfg.pin_d0 = GPIO_NUM_15; // B0
+            cfg.pin_d1 = GPIO_NUM_14; // B1
+            cfg.pin_d2 = GPIO_NUM_13; // B2
+            cfg.pin_d3 = GPIO_NUM_12; // B3
+            cfg.pin_d4 = GPIO_NUM_11; // B4
+
+            cfg.pin_d5 = GPIO_NUM_10; // G0
+            cfg.pin_d6 = GPIO_NUM_9;  // G1
+            cfg.pin_d7 = GPIO_NUM_8;  // G2
+            cfg.pin_d8 = GPIO_NUM_7;  // G3
+            cfg.pin_d9 = GPIO_NUM_6;  // G4
+            cfg.pin_d10 = GPIO_NUM_5; // G5
+
+            cfg.pin_d11 = GPIO_NUM_4; // R0
+            cfg.pin_d12 = GPIO_NUM_3; // R1
+            cfg.pin_d13 = GPIO_NUM_2; // R2
+            cfg.pin_d14 = GPIO_NUM_1; // R3
+            cfg.pin_d15 = GPIO_NUM_0; // R4
+
+            cfg.pin_henable = GPIO_NUM_18;
+            cfg.pin_vsync = GPIO_NUM_17;
+            cfg.pin_hsync = GPIO_NUM_16;
+            cfg.pin_pclk = GPIO_NUM_21;
+            cfg.freq_write = 12000000;
+
+            cfg.hsync_polarity = 0;
+            cfg.hsync_front_porch = 10;
+            cfg.hsync_pulse_width = 8;
+            cfg.hsync_back_porch = 50;
+
+            cfg.vsync_polarity = 0;
+            cfg.vsync_front_porch = 10;
+            cfg.vsync_pulse_width = 8;
+            cfg.vsync_back_porch = 20;
+
+            cfg.pclk_active_neg = 0;
+            cfg.de_idle_high = 1;
+            cfg.pclk_idle_high = 0;
+#endif
+            _bus_instance.config(cfg);
+        }
+        _panel_instance.setBus(&_bus_instance);
+
+        {
+            auto cfg = _light_instance.config();
+            cfg.pin_bl = ST7701_BL;
+            _light_instance.config(cfg);
+        }
+        _panel_instance.light(&_light_instance);
+
+        {
+            auto cfg = _touch_instance.config();
+            cfg.pin_cs = -1;
+            cfg.x_min = 0;
+            cfg.x_max = 479;
+            cfg.y_min = 0;
+            cfg.y_max = 479;
+            cfg.pin_int = -1; // don't use SCREEN_TOUCH_INT;
+            cfg.pin_rst = SCREEN_TOUCH_RST;
+            cfg.bus_shared = true;
+            cfg.offset_rotation = TFT_OFFSET_ROTATION;
+
+            cfg.i2c_port = TOUCH_I2C_PORT;
+            cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+            cfg.pin_sda = I2C_SDA;
+            cfg.pin_scl = I2C_SCL;
+            cfg.freq = 400000;
+            _touch_instance.config(cfg);
+            _panel_instance.setTouch(&_touch_instance);
+        }
+
+        setPanel(&_panel_instance);
+    }
+};
+
+static LGFX *tft = nullptr;
+
 #endif
 
-#if defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) || defined(HX8357_CS) ||            \
-    (ARCH_PORTDUINO && HAS_SCREEN != 0)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) || defined(ILI9341_DRIVER) || defined(RAK14014) ||            \
+    defined(HX8357_CS) || (ARCH_PORTDUINO && HAS_SCREEN != 0)
 #include "SPILock.h"
 #include "TFTDisplay.h"
 #include <SPI.h>
@@ -521,9 +629,26 @@ static LGFX *tft = nullptr;
 extern unPhone unphone;
 #endif
 
+GpioPin *TFTDisplay::backlightEnable = NULL;
+
 TFTDisplay::TFTDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
     LOG_DEBUG("TFTDisplay!\n");
+
+#ifdef TFT_BL
+    GpioPin *p = new GpioHwPin(TFT_BL);
+
+    if (!TFT_BACKLIGHT_ON) { // Need to invert the pin before hardware
+        auto virtPin = new GpioVirtPin();
+        new GpioNotTransformer(
+            virtPin, p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio
+        p = virtPin;
+    }
+#else
+    GpioPin *p = new GpioVirtPin(); // Just simulate a pin
+#endif
+    backlightEnable = p;
+
 #if ARCH_PORTDUINO
     if (settingsMap[displayRotate]) {
         setGeometry(GEOMETRY_RAWMODE, settingsMap[configNames::displayHeight], settingsMap[configNames::displayWidth]);
@@ -577,24 +702,15 @@ void TFTDisplay::sendCommand(uint8_t com)
     // handle display on/off directly
     switch (com) {
     case DISPLAYON: {
+        // LOG_DEBUG("Display on\n");
+        backlightEnable->set(true);
 #if ARCH_PORTDUINO
         display(true);
         if (settingsMap[displayBacklight] > 0)
             digitalWrite(settingsMap[displayBacklight], TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V03)
-        digitalWrite(ST7735_BL_V03, TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V05)
-        pinMode(ST7735_BL_V05, OUTPUT);
-        digitalWrite(ST7735_BL_V05, TFT_BACKLIGHT_ON);
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->wakeup();
         tft->powerSaveOff();
-#elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
-        digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
-#endif
-
-#ifdef VTFT_CTRL_V03
-        digitalWrite(VTFT_CTRL_V03, LOW);
 #endif
 
 #ifdef VTFT_CTRL
@@ -610,25 +726,17 @@ void TFTDisplay::sendCommand(uint8_t com)
         break;
     }
     case DISPLAYOFF: {
+        // LOG_DEBUG("Display off\n");
+        backlightEnable->set(false);
 #if ARCH_PORTDUINO
         tft->clear();
         if (settingsMap[displayBacklight] > 0)
             digitalWrite(settingsMap[displayBacklight], !TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V03)
-        digitalWrite(ST7735_BL_V03, !TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V05)
-        pinMode(ST7735_BL_V05, OUTPUT);
-        digitalWrite(ST7735_BL_V05, !TFT_BACKLIGHT_ON);
 #elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
         tft->sleep();
         tft->powerSaveOn();
-#elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
-        digitalWrite(TFT_BL, !TFT_BACKLIGHT_ON);
 #endif
 
-#ifdef VTFT_CTRL_V03
-        digitalWrite(VTFT_CTRL_V03, HIGH);
-#endif
 #ifdef VTFT_CTRL
         digitalWrite(VTFT_CTRL, HIGH);
 #endif
@@ -712,23 +820,11 @@ bool TFTDisplay::connect()
     tft = new LGFX;
 #endif
 
-#ifdef TFT_BL
-    pinMode(TFT_BL, OUTPUT);
-    digitalWrite(TFT_BL, TFT_BACKLIGHT_ON);
-    // pinMode(PIN_3V3_EN, OUTPUT);
-    // digitalWrite(PIN_3V3_EN, HIGH);
+    backlightEnable->set(true);
     LOG_INFO("Power to TFT Backlight\n");
-#endif
 
-#ifdef ST7735_BL_V03
-    digitalWrite(ST7735_BL_V03, TFT_BACKLIGHT_ON);
-#elif defined(ST7735_BL_V05)
-    pinMode(ST7735_BL_V05, OUTPUT);
-    digitalWrite(ST7735_BL_V05, TFT_BACKLIGHT_ON);
-#endif
 #ifdef UNPHONE
     unphone.backlight(true); // using unPhone library
-    LOG_INFO("Power to TFT Backlight\n");
 #endif
 
     tft->init();
@@ -744,7 +840,7 @@ bool TFTDisplay::connect()
     attachInterrupt(digitalPinToInterrupt(SCREEN_TOUCH_INT), rak14014_tpIntHandle, FALLING);
 #elif defined(T_DECK) || defined(PICOMPUTER_S3) || defined(CHATTER_2)
     tft->setRotation(1); // T-Deck has the TFT in landscape
-#elif defined(T_WATCH_S3)
+#elif defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR)
     tft->setRotation(2); // T-Watch S3 left-handed orientation
 #else
     tft->setRotation(3); // Orient horizontal and wide underneath the silkscreen name label

src/graphics/TFTDisplay.h

@@ -1,5 +1,6 @@
 #pragma once
 
+#include <GpioLogic.h>
 #include <OLEDDisplay.h>
 
 /**
@@ -39,6 +40,14 @@ class TFTDisplay : public OLEDDisplay
      */
     void setDetected(uint8_t detected);
 
+    /**
+     * This is normally managed entirely by TFTDisplay, but some rare applications (heltec tracker) might need to replace the
+     * default GPIO behavior with something a bit more complex.
+     *
+     * We (cruftily) make it static so that variant.cpp can access it without needing a ptr to the TFTDisplay instance.
+     */
+    static GpioPin *backlightEnable;
+
   protected:
     // the header size of the buffer used, e.g. for the SPI command header
     virtual int getBufferOffset(void) override { return 0; }

src/graphics/fonts/OLEDDisplayFontsPL.cpp

@@ -0,0 +1,440 @@
+#include "OLEDDisplayFontsPL.h"
+
+// Font generated or edited with the glyphEditor
+const uint8_t ArialMT_Plain_10_PL[] PROGMEM = {
+    0x0A, // Width: 10
+    0x0D, // Height: 13
+    0x20, // First char: 32
+    0xE0, // Number of chars: 224
+
+    // Jump Table:
+    0xFF, 0xFF, 0x00, 0x03, // 32:65535
+    0x00, 0x00, 0x04, 0x03, // 33
+    0x00, 0x04, 0x05, 0x04, // 34
+    0x00, 0x09, 0x09, 0x06, // 35
+    0x00, 0x12, 0x0A, 0x06, // 36
+    0x00, 0x1C, 0x10, 0x09, // 37
+    0x00, 0x2C, 0x0E, 0x08, // 38
+    0x00, 0x3A, 0x01, 0x02, // 39
+    0x00, 0x3B, 0x06, 0x04, // 40
+    0x00, 0x41, 0x06, 0x04, // 41
+    0x00, 0x47, 0x05, 0x04, // 42
+    0x00, 0x4C, 0x09, 0x06, // 43
+    0x00, 0x55, 0x04, 0x03, // 44
+    0x00, 0x59, 0x03, 0x03, // 45
+    0x00, 0x5C, 0x04, 0x03, // 46
+    0x00, 0x60, 0x05, 0x04, // 47
+    0x00, 0x65, 0x0A, 0x06, // 48
+    0x00, 0x6F, 0x08, 0x05, // 49
+    0x00, 0x77, 0x0A, 0x06, // 50
+    0x00, 0x81, 0x0A, 0x06, // 51
+    0x00, 0x8B, 0x0B, 0x07, // 52
+    0x00, 0x96, 0x0A, 0x06, // 53
+    0x00, 0xA0, 0x0A, 0x06, // 54
+    0x00, 0xAA, 0x09, 0x06, // 55
+    0x00, 0xB3, 0x0A, 0x06, // 56
+    0x00, 0xBD, 0x0A, 0x06, // 57
+    0x00, 0xC7, 0x04, 0x03, // 58
+    0x00, 0xCB, 0x04, 0x03, // 59
+    0x00, 0xCF, 0x0A, 0x06, // 60
+    0x00, 0xD9, 0x09, 0x06, // 61
+    0x00, 0xE2, 0x09, 0x06, // 62
+    0x00, 0xEB, 0x0B, 0x07, // 63
+    0x00, 0xF6, 0x14, 0x0B, // 64
+    0x01, 0x0A, 0x0E, 0x08, // 65
+    0x01, 0x18, 0x0C, 0x07, // 66
+    0x01, 0x24, 0x0C, 0x07, // 67
+    0x01, 0x30, 0x0B, 0x07, // 68
+    0x01, 0x3B, 0x0C, 0x07, // 69
+    0x01, 0x47, 0x09, 0x06, // 70
+    0x01, 0x50, 0x0D, 0x08, // 71
+    0x01, 0x5D, 0x0C, 0x07, // 72
+    0x01, 0x69, 0x04, 0x03, // 73
+    0x01, 0x6D, 0x08, 0x05, // 74
+    0x01, 0x75, 0x0E, 0x08, // 75
+    0x01, 0x83, 0x0C, 0x07, // 76
+    0x01, 0x8F, 0x10, 0x09, // 77
+    0x01, 0x9F, 0x0C, 0x07, // 78
+    0x01, 0xAB, 0x0E, 0x08, // 79
+    0x01, 0xB9, 0x0B, 0x07, // 80
+    0x01, 0xC4, 0x0E, 0x08, // 81
+    0x01, 0xD2, 0x0C, 0x07, // 82
+    0x01, 0xDE, 0x0C, 0x07, // 83
+    0x01, 0xEA, 0x0B, 0x07, // 84
+    0x01, 0xF5, 0x0C, 0x07, // 85
+    0x02, 0x01, 0x0D, 0x08, // 86
+    0x02, 0x0E, 0x11, 0x0A, // 87
+    0x02, 0x1F, 0x0E, 0x08, // 88
+    0x02, 0x2D, 0x0D, 0x08, // 89
+    0x02, 0x3A, 0x0C, 0x07, // 90
+    0x02, 0x46, 0x06, 0x04, // 91
+    0x02, 0x4C, 0x06, 0x04, // 92
+    0x02, 0x52, 0x04, 0x03, // 93
+    0x02, 0x56, 0x09, 0x06, // 94
+    0x02, 0x5F, 0x0C, 0x07, // 95
+    0x02, 0x6B, 0x03, 0x03, // 96
+    0x02, 0x6E, 0x0A, 0x06, // 97
+    0x02, 0x78, 0x0A, 0x06, // 98
+    0x02, 0x82, 0x0A, 0x06, // 99
+    0x02, 0x8C, 0x0A, 0x06, // 100
+    0x02, 0x96, 0x0A, 0x06, // 101
+    0x02, 0xA0, 0x05, 0x04, // 102
+    0x02, 0xA5, 0x0A, 0x06, // 103
+    0x02, 0xAF, 0x0A, 0x06, // 104
+    0x02, 0xB9, 0x04, 0x03, // 105
+    0x02, 0xBD, 0x04, 0x03, // 106
+    0x02, 0xC1, 0x08, 0x05, // 107
+    0x02, 0xC9, 0x04, 0x03, // 108
+    0x02, 0xCD, 0x10, 0x09, // 109
+    0x02, 0xDD, 0x0A, 0x06, // 110
+    0x02, 0xE7, 0x0A, 0x06, // 111
+    0x02, 0xF1, 0x0A, 0x06, // 112
+    0x02, 0xFB, 0x0A, 0x06, // 113
+    0x03, 0x05, 0x05, 0x04, // 114
+    0x03, 0x0A, 0x08, 0x05, // 115
+    0x03, 0x12, 0x06, 0x04, // 116
+    0x03, 0x18, 0x0A, 0x06, // 117
+    0x03, 0x22, 0x09, 0x06, // 118
+    0x03, 0x2B, 0x0E, 0x08, // 119
+    0x03, 0x39, 0x0A, 0x06, // 120
+    0x03, 0x43, 0x09, 0x06, // 121
+    0x03, 0x4C, 0x0A, 0x06, // 122
+    0x03, 0x56, 0x06, 0x04, // 123
+    0x03, 0x5C, 0x04, 0x03, // 124
+    0x03, 0x60, 0x05, 0x04, // 125
+    0x03, 0x65, 0x09, 0x06, // 126
+    0xFF, 0xFF, 0x00, 0x0A, // 127
+    0xFF, 0xFF, 0x00, 0x0A, // 128
+    0x03, 0x6E, 0x0C, 0x07, // 129
+    0x03, 0x7A, 0x05, 0x04, // 130
+    0x03, 0x7F, 0x0C, 0x07, // 131
+    0x03, 0x8B, 0x0E, 0x08, // 132
+    0x03, 0x99, 0x0C, 0x07, // 133
+    0x03, 0xA5, 0x0C, 0x07, // 134
+    0x03, 0xB1, 0x0A, 0x06, // 135
+    0x03, 0xBB, 0x0A, 0x06, // 136
+    0x03, 0xC5, 0x0A, 0x06, // 137
+    0xFF, 0xFF, 0x00, 0x0A, // 138
+    0xFF, 0xFF, 0x00, 0x0A, // 139
+    0xFF, 0xFF, 0x00, 0x0A, // 140
+    0xFF, 0xFF, 0x00, 0x0A, // 141
+    0xFF, 0xFF, 0x00, 0x0A, // 142
+    0xFF, 0xFF, 0x00, 0x0A, // 143
+    0xFF, 0xFF, 0x00, 0x0A, // 144
+    0xFF, 0xFF, 0x00, 0x0A, // 145
+    0xFF, 0xFF, 0x00, 0x0A, // 146
+    0x03, 0xCF, 0x0E, 0x08, // 147
+    0x03, 0xDD, 0x0A, 0x06, // 148
+    0xFF, 0xFF, 0x00, 0x0A, // 149
+    0xFF, 0xFF, 0x00, 0x0A, // 150
+    0xFF, 0xFF, 0x00, 0x0A, // 151
+    0x03, 0xE7, 0x0C, 0x07, // 152
+    0x03, 0xF3, 0x0C, 0x07, // 153
+    0x03, 0xFF, 0x0C, 0x07, // 154
+    0x04, 0x0B, 0x08, 0x05, // 155
+    0xFF, 0xFF, 0x00, 0x0A, // 156
+    0xFF, 0xFF, 0x00, 0x0A, // 157
+    0xFF, 0xFF, 0x00, 0x0A, // 158
+    0xFF, 0xFF, 0x00, 0x0A, // 159
+    0xFF, 0xFF, 0x00, 0x0A, // 160
+    0x04, 0x13, 0x04, 0x03, // 161
+    0x04, 0x17, 0x0A, 0x06, // 162
+    0x04, 0x21, 0x0C, 0x07, // 163
+    0x04, 0x2D, 0x0A, 0x06, // 164
+    0x04, 0x37, 0x0A, 0x06, // 165
+    0x04, 0x41, 0x04, 0x03, // 166
+    0x04, 0x45, 0x0A, 0x06, // 167
+    0x04, 0x4F, 0x05, 0x04, // 168
+    0x04, 0x54, 0x0D, 0x08, // 169
+    0x04, 0x61, 0x07, 0x05, // 170
+    0x04, 0x68, 0x0A, 0x06, // 171
+    0x04, 0x72, 0x09, 0x06, // 172
+    0x04, 0x7B, 0x03, 0x03, // 173
+    0x04, 0x7E, 0x0D, 0x08, // 174
+    0x04, 0x8B, 0x0B, 0x07, // 175
+    0x04, 0x96, 0x07, 0x05, // 176
+    0x04, 0x9D, 0x0A, 0x06, // 177
+    0x04, 0xA7, 0x05, 0x04, // 178
+    0x04, 0xAC, 0x05, 0x04, // 179
+    0x04, 0xB1, 0x05, 0x04, // 180
+    0x04, 0xB6, 0x0A, 0x06, // 181
+    0x04, 0xC0, 0x09, 0x06, // 182
+    0x04, 0xC9, 0x03, 0x03, // 183
+    0x04, 0xCC, 0x06, 0x04, // 184
+    0x04, 0xD2, 0x0C, 0x07, // 185
+    0x04, 0xDE, 0x07, 0x05, // 186
+    0x04, 0xE5, 0x0C, 0x07, // 187
+    0x04, 0xF1, 0x0A, 0x06, // 188
+    0x04, 0xFB, 0x10, 0x09, // 189
+    0x05, 0x0B, 0x10, 0x09, // 190
+    0x05, 0x1B, 0x0A, 0x06, // 191
+    0x05, 0x25, 0x0E, 0x08, // 192
+    0x05, 0x33, 0x0E, 0x08, // 193
+    0x05, 0x41, 0x0E, 0x08, // 194
+    0x05, 0x4F, 0x0E, 0x08, // 195
+    0x05, 0x5D, 0x0E, 0x08, // 196
+    0x05, 0x6B, 0x0E, 0x08, // 197
+    0x05, 0x79, 0x12, 0x0A, // 198
+    0x05, 0x8B, 0x0C, 0x07, // 199
+    0x05, 0x97, 0x0C, 0x07, // 200
+    0x05, 0xA3, 0x0C, 0x07, // 201
+    0x05, 0xAF, 0x0C, 0x07, // 202
+    0x05, 0xBB, 0x0C, 0x07, // 203
+    0x05, 0xC7, 0x05, 0x04, // 204
+    0x05, 0xCC, 0x04, 0x03, // 205
+    0x05, 0xD0, 0x04, 0x03, // 206
+    0x05, 0xD4, 0x05, 0x04, // 207
+    0x05, 0xD9, 0x0B, 0x07, // 208
+    0x05, 0xE4, 0x0C, 0x07, // 209
+    0x05, 0xF0, 0x0E, 0x08, // 210
+    0x05, 0xFE, 0x0E, 0x08, // 211
+    0x06, 0x0C, 0x0E, 0x08, // 212
+    0x06, 0x1A, 0x0E, 0x08, // 213
+    0x06, 0x28, 0x0E, 0x08, // 214
+    0x06, 0x36, 0x0A, 0x06, // 215
+    0x06, 0x40, 0x0D, 0x08, // 216
+    0x06, 0x4D, 0x0C, 0x07, // 217
+    0x06, 0x59, 0x0C, 0x07, // 218
+    0x06, 0x65, 0x0C, 0x07, // 219
+    0x06, 0x71, 0x0C, 0x07, // 220
+    0x06, 0x7D, 0x0D, 0x08, // 221
+    0x06, 0x8A, 0x0B, 0x07, // 222
+    0x06, 0x95, 0x0C, 0x07, // 223
+    0x06, 0xA1, 0x0A, 0x06, // 224
+    0x06, 0xAB, 0x0A, 0x06, // 225
+    0x06, 0xB5, 0x0A, 0x06, // 226
+    0x06, 0xBF, 0x0A, 0x06, // 227
+    0x06, 0xC9, 0x0A, 0x06, // 228
+    0x06, 0xD3, 0x0A, 0x06, // 229
+    0x06, 0xDD, 0x10, 0x09, // 230
+    0x06, 0xED, 0x0A, 0x06, // 231
+    0x06, 0xF7, 0x0A, 0x06, // 232
+    0x07, 0x01, 0x0A, 0x06, // 233
+    0x07, 0x0B, 0x0A, 0x06, // 234
+    0x07, 0x15, 0x0A, 0x06, // 235
+    0x07, 0x1F, 0x05, 0x04, // 236
+    0x07, 0x24, 0x04, 0x03, // 237
+    0x07, 0x28, 0x05, 0x04, // 238
+    0x07, 0x2D, 0x05, 0x04, // 239
+    0x07, 0x32, 0x0A, 0x06, // 240
+    0x07, 0x3C, 0x0A, 0x06, // 241
+    0x07, 0x46, 0x0A, 0x06, // 242
+    0x07, 0x50, 0x0A, 0x06, // 243
+    0x07, 0x5A, 0x0A, 0x06, // 244
+    0x07, 0x64, 0x0A, 0x06, // 245
+    0x07, 0x6E, 0x0A, 0x06, // 246
+    0x07, 0x78, 0x09, 0x06, // 247
+    0x07, 0x81, 0x0A, 0x06, // 248
+    0x07, 0x8B, 0x0A, 0x06, // 249
+    0x07, 0x95, 0x0A, 0x06, // 250
+    0x07, 0x9F, 0x0A, 0x06, // 251
+    0x07, 0xA9, 0x0A, 0x06, // 252
+    0x07, 0xB3, 0x09, 0x06, // 253
+    0x07, 0xBC, 0x0A, 0x06, // 254
+    0x07, 0xC6, 0x09, 0x06, // 255
+    // Font Data:
+    0x00, 0x00, 0xF8, 0x02,                                                                                                 // 33
+    0x38, 0x00, 0x00, 0x00, 0x38,                                                                                           // 34
+    0xA0, 0x03, 0xE0, 0x00, 0xB8, 0x03, 0xE0, 0x00, 0xB8,                                                                   // 35
+    0x30, 0x01, 0x28, 0x02, 0xF8, 0x07, 0x48, 0x02, 0x90, 0x01,                                                             // 36
+    0x00, 0x00, 0x30, 0x00, 0x48, 0x00, 0x30, 0x03, 0xC0, 0x00, 0xB0, 0x01, 0x48, 0x02, 0x80, 0x01,                         // 37
+    0x80, 0x01, 0x50, 0x02, 0x68, 0x02, 0xA8, 0x02, 0x18, 0x01, 0x80, 0x03, 0x80, 0x02,                                     // 38
+    0x38,                                                                                                                   // 39
+    0xE0, 0x03, 0x10, 0x04, 0x08, 0x08,                                                                                     // 40
+    0x08, 0x08, 0x10, 0x04, 0xE0, 0x03,                                                                                     // 41
+    0x28, 0x00, 0x18, 0x00, 0x28,                                                                                           // 42
+    0x40, 0x00, 0x40, 0x00, 0xF0, 0x01, 0x40, 0x00, 0x40,                                                                   // 43
+    0x00, 0x00, 0x00, 0x06,                                                                                                 // 44
+    0x80, 0x00, 0x80,                                                                                                       // 45
+    0x00, 0x00, 0x00, 0x02,                                                                                                 // 46
+    0x00, 0x03, 0xE0, 0x00, 0x18,                                                                                           // 47
+    0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                                             // 48
+    0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0xF8, 0x03,                                                                         // 49
+    0x10, 0x02, 0x08, 0x03, 0x88, 0x02, 0x48, 0x02, 0x30, 0x02,                                                             // 50
+    0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                             // 51
+    0xC0, 0x00, 0xA0, 0x00, 0x90, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x80,                                                       // 52
+    0x60, 0x01, 0x38, 0x02, 0x28, 0x02, 0x28, 0x02, 0xC8, 0x01,                                                             // 53
+    0xF0, 0x01, 0x28, 0x02, 0x28, 0x02, 0x28, 0x02, 0xD0, 0x01,                                                             // 54
+    0x08, 0x00, 0x08, 0x03, 0xC8, 0x00, 0x38, 0x00, 0x08,                                                                   // 55
+    0xB0, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                             // 56
+    0x70, 0x01, 0x88, 0x02, 0x88, 0x02, 0x88, 0x02, 0xF0, 0x01,                                                             // 57
+    0x00, 0x00, 0x20, 0x02,                                                                                                 // 58
+    0x00, 0x00, 0x20, 0x06,                                                                                                 // 59
+    0x00, 0x00, 0x40, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x10, 0x01,                                                             // 60
+    0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0,                                                                   // 61
+    0x00, 0x00, 0x10, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0x40,                                                                   // 62
+    0x10, 0x00, 0x08, 0x00, 0x08, 0x00, 0xC8, 0x02, 0x48, 0x00, 0x30,                                                       // 63
+    0x00, 0x00, 0xC0, 0x03, 0x30, 0x04, 0xD0, 0x09, 0x28, 0x0A, 0x28, 0x0A, 0xC8, 0x0B, 0x68, 0x0A, 0x10, 0x05, 0xE0, 0x04, // 64
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 65
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01,                                                 // 66
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01,                                                 // 67
+    0x00, 0x00, 0xF8, 0x03, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, 0xE0,                                                       // 68
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 69
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x08,                                                                   // 70
+    0x00, 0x00, 0xE0, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x50, 0x01, 0xC0,                                           // 71
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03,                                                 // 72
+    0x00, 0x00, 0xF8, 0x03,                                                                                                 // 73
+    0x00, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                                         // 74
+    0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                                     // 75
+    0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02,                                                 // 76
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x30, 0x00, 0xF8, 0x03,                         // 77
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x40, 0x00, 0x80, 0x01, 0xF8, 0x03,                                                 // 78
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 79
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                                                       // 80
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x03, 0x08, 0x03, 0xF0, 0x02,                                     // 81
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0xC8, 0x00, 0x30, 0x03,                                                 // 82
+    0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x90, 0x01,                                                 // 83
+    0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08,                                                       // 84
+    0x00, 0x00, 0xF8, 0x01, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 85
+    0x08, 0x00, 0x70, 0x00, 0x80, 0x01, 0x00, 0x02, 0x80, 0x01, 0x70, 0x00, 0x08,                                           // 86
+    0x18, 0x00, 0xE0, 0x01, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0xF0, 0x01, 0x00, 0x02, 0xE0, 0x01, 0x18,                   // 87
+    0x00, 0x02, 0x08, 0x01, 0x90, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                                     // 88
+    0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC0, 0x03, 0x20, 0x00, 0x10, 0x00, 0x08,                                           // 89
+    0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x68, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 90
+    0x00, 0x00, 0xF8, 0x0F, 0x08, 0x08,                                                                                     // 91
+    0x18, 0x00, 0xE0, 0x00, 0x00, 0x03,                                                                                     // 92
+    0x08, 0x08, 0xF8, 0x0F,                                                                                                 // 93
+    0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x30, 0x00, 0x40,                                                                   // 94
+    0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08,                                                 // 95
+    0x08, 0x00, 0x10,                                                                                                       // 96
+    0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x03,                                                             // 97
+    0x00, 0x00, 0xF8, 0x03, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 98
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x40, 0x01,                                                             // 99
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xF8, 0x03,                                                             // 100
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02,                                                             // 101
+    0x20, 0x00, 0xF0, 0x03, 0x28,                                                                                           // 102
+    0x00, 0x00, 0xC0, 0x05, 0x20, 0x0A, 0x20, 0x0A, 0xE0, 0x07,                                                             // 103
+    0x00, 0x00, 0xF8, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                                             // 104
+    0x00, 0x00, 0xE8, 0x03,                                                                                                 // 105
+    0x00, 0x08, 0xE8, 0x07,                                                                                                 // 106
+    0xF8, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02,                                                                         // 107
+    0x00, 0x00, 0xF8, 0x03,                                                                                                 // 108
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                         // 109
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                                             // 110
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 111
+    0x00, 0x00, 0xE0, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 112
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xE0, 0x0F,                                                             // 113
+    0x00, 0x00, 0xE0, 0x03, 0x20,                                                                                           // 114
+    0x40, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x20, 0x01,                                                                         // 115
+    0x20, 0x00, 0xF8, 0x03, 0x20, 0x02,                                                                                     // 116
+    0x00, 0x00, 0xE0, 0x01, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,                                                             // 117
+    0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20,                                                                   // 118
+    0xE0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xE0, 0x01,                                     // 119
+    0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02,                                                             // 120
+    0x20, 0x00, 0xC0, 0x09, 0x00, 0x06, 0xC0, 0x01, 0x20,                                                                   // 121
+    0x20, 0x02, 0x20, 0x03, 0xA0, 0x02, 0x60, 0x02, 0x20, 0x02,                                                             // 122
+    0x80, 0x00, 0x78, 0x0F, 0x08, 0x08,                                                                                     // 123
+    0x00, 0x00, 0xF8, 0x0F,                                                                                                 // 124
+    0x08, 0x08, 0x78, 0x0F, 0x80,                                                                                           // 125
+    0xC0, 0x00, 0x40, 0x00, 0xC0, 0x00, 0x80, 0x00, 0xC0,                                                                   // 126
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x20, 0x02, 0x00, 0x02, 0x00, 0x02,                                                 // 129
+    0x40, 0x00, 0xF8, 0x03, 0x20,                                                                                           // 130
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x44, 0x00, 0x82, 0x01, 0xF8, 0x03,                                                 // 131
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x05, 0x00, 0x0A,                                     // 132
+    0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x07, 0x00, 0x08,                                                 // 133
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x10, 0x01,                                                 // 134
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x28, 0x02, 0x44, 0x01,                                                             // 135
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x28, 0x00, 0xC4, 0x03,                                                             // 136
+    0x20, 0x02, 0x20, 0x03, 0xA8, 0x02, 0x64, 0x02, 0x20, 0x02,                                                             // 137
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0xF0, 0x01,                                     // 147
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x28, 0x02, 0xC4, 0x01,                                                             // 148
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x06, 0x48, 0x0A,                                                 // 152
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x06, 0x00, 0x08,                                                 // 153
+    0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x4A, 0x02, 0x49, 0x02, 0x90, 0x01,                                                 // 154
+    0x40, 0x02, 0xA0, 0x02, 0xA8, 0x02, 0x24, 0x01,                                                                         // 155
+    0x00, 0x00, 0xA0, 0x0F,                                                                                                 // 161
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x0F, 0x78, 0x02, 0x40, 0x01,                                                             // 162
+    0x40, 0x02, 0x70, 0x03, 0xC8, 0x02, 0x48, 0x02, 0x08, 0x02, 0x10, 0x02,                                                 // 163
+    0x00, 0x00, 0xE0, 0x01, 0x20, 0x01, 0x20, 0x01, 0xE0, 0x01,                                                             // 164
+    0x48, 0x01, 0x70, 0x01, 0xC0, 0x03, 0x70, 0x01, 0x48, 0x01,                                                             // 165
+    0x00, 0x00, 0x38, 0x0F,                                                                                                 // 166
+    0xD0, 0x04, 0x28, 0x09, 0x48, 0x09, 0x48, 0x0A, 0x90, 0x05,                                                             // 167
+    0x08, 0x00, 0x00, 0x00, 0x08,                                                                                           // 168
+    0xE0, 0x00, 0x10, 0x01, 0x48, 0x02, 0xA8, 0x02, 0xA8, 0x02, 0x10, 0x01, 0xE0,                                           // 169
+    0x68, 0x00, 0x68, 0x00, 0x68, 0x00, 0x78,                                                                               // 170
+    0x00, 0x00, 0x80, 0x01, 0x40, 0x02, 0x80, 0x01, 0x40, 0x02,                                                             // 171
+    0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0,                                                                   // 172
+    0x80, 0x00, 0x80,                                                                                                       // 173
+    0xE0, 0x00, 0x10, 0x01, 0xE8, 0x02, 0x68, 0x02, 0xC8, 0x02, 0x10, 0x01, 0xE0,                                           // 174
+    0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02,                                                       // 175
+    0x00, 0x00, 0x38, 0x00, 0x28, 0x00, 0x38,                                                                               // 176
+    0x40, 0x02, 0x40, 0x02, 0xF0, 0x03, 0x40, 0x02, 0x40, 0x02,                                                             // 177
+    0x48, 0x00, 0x68, 0x00, 0x58,                                                                                           // 178
+    0x48, 0x00, 0x58, 0x00, 0x68,                                                                                           // 179
+    0x00, 0x00, 0x10, 0x00, 0x08,                                                                                           // 180
+    0x00, 0x00, 0xE0, 0x0F, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,                                                             // 181
+    0x70, 0x00, 0xF8, 0x0F, 0x08, 0x00, 0xF8, 0x0F, 0x08,                                                                   // 182
+    0x00, 0x00, 0x40,                                                                                                       // 183
+    0x00, 0x00, 0x00, 0x14, 0x00, 0x18,                                                                                     // 184
+    0x08, 0x03, 0x88, 0x02, 0xCA, 0x02, 0x69, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 185
+    0x30, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                                                                               // 186
+    0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x6A, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 187
+    0x20, 0x02, 0x20, 0x03, 0xA8, 0x02, 0x60, 0x02, 0x20, 0x02,                                                             // 188
+    0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0x80, 0x00, 0x60, 0x00, 0x50, 0x02, 0x48, 0x03, 0xC0, 0x02,                         // 189
+    0x48, 0x00, 0x58, 0x00, 0x68, 0x03, 0x80, 0x00, 0x60, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01,                         // 190
+    0x00, 0x00, 0x00, 0x06, 0x00, 0x09, 0xA0, 0x09, 0x00, 0x04,                                                             // 191
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x89, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 192
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x8A, 0x00, 0xB1, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 193
+    0x00, 0x02, 0xC0, 0x01, 0xB2, 0x00, 0x89, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 194
+    0x00, 0x02, 0xC2, 0x01, 0xB1, 0x00, 0x8A, 0x00, 0xB1, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 195
+    0x00, 0x02, 0xC0, 0x01, 0xB2, 0x00, 0x88, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 196
+    0x00, 0x02, 0xC0, 0x01, 0xBE, 0x00, 0x8A, 0x00, 0xBE, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 197
+    0x00, 0x03, 0xC0, 0x00, 0xE0, 0x00, 0x98, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02,             // 198
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x16, 0x08, 0x1A, 0x10, 0x01,                                                 // 199
+    0x00, 0x00, 0xF8, 0x03, 0x49, 0x02, 0x4A, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 200
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x4A, 0x02, 0x49, 0x02, 0x48, 0x02,                                                 // 201
+    0x00, 0x00, 0xFA, 0x03, 0x49, 0x02, 0x4A, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 202
+    0x00, 0x00, 0xF8, 0x03, 0x4A, 0x02, 0x48, 0x02, 0x4A, 0x02, 0x48, 0x02,                                                 // 203
+    0x00, 0x00, 0xF9, 0x03, 0x02,                                                                                           // 204
+    0x02, 0x00, 0xF9, 0x03,                                                                                                 // 205
+    0x01, 0x00, 0xFA, 0x03,                                                                                                 // 206
+    0x02, 0x00, 0xF8, 0x03, 0x02,                                                                                           // 207
+    0x40, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x10, 0x01, 0xE0,                                                       // 208
+    0x00, 0x00, 0xFA, 0x03, 0x31, 0x00, 0x42, 0x00, 0x81, 0x01, 0xF8, 0x03,                                                 // 209
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x09, 0x02, 0x0A, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 210
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 211
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x0A, 0x02, 0xF0, 0x01,                                     // 212
+    0x00, 0x00, 0xF0, 0x01, 0x0A, 0x02, 0x09, 0x02, 0x0A, 0x02, 0x09, 0x02, 0xF0, 0x01,                                     // 213
+    0x00, 0x00, 0xF0, 0x01, 0x0A, 0x02, 0x08, 0x02, 0x0A, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 214
+    0x10, 0x01, 0xA0, 0x00, 0xE0, 0x00, 0xA0, 0x00, 0x10, 0x01,                                                             // 215
+    0x00, 0x00, 0xF0, 0x02, 0x08, 0x03, 0xC8, 0x02, 0x28, 0x02, 0x18, 0x03, 0xE8,                                           // 216
+    0x00, 0x00, 0xF8, 0x01, 0x01, 0x02, 0x02, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 217
+    0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x01, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 218
+    0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x01, 0x02, 0x02, 0x02, 0xF8, 0x01,                                                 // 219
+    0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x00, 0x02, 0x02, 0x02, 0xF8, 0x01,                                                 // 220
+    0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC2, 0x03, 0x21, 0x00, 0x10, 0x00, 0x08,                                           // 221
+    0x00, 0x00, 0xF8, 0x03, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xE0,                                                       // 222
+    0x00, 0x00, 0xF0, 0x03, 0x08, 0x01, 0x48, 0x02, 0xB0, 0x02, 0x80, 0x01,                                                 // 223
+    0x00, 0x00, 0x00, 0x03, 0xA4, 0x02, 0xA8, 0x02, 0xE0, 0x03,                                                             // 224
+    0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA4, 0x02, 0xE0, 0x03,                                                             // 225
+    0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA4, 0x02, 0xE8, 0x03,                                                             // 226
+    0x00, 0x00, 0x08, 0x03, 0xA4, 0x02, 0xA8, 0x02, 0xE4, 0x03,                                                             // 227
+    0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA0, 0x02, 0xE8, 0x03,                                                             // 228
+    0x00, 0x00, 0x00, 0x03, 0xAE, 0x02, 0xAA, 0x02, 0xEE, 0x03,                                                             // 229
+    0x00, 0x00, 0x40, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02,                         // 230
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x16, 0x20, 0x1A, 0x40, 0x01,                                                             // 231
+    0x00, 0x00, 0xC0, 0x01, 0xA4, 0x02, 0xA8, 0x02, 0xC0, 0x02,                                                             // 232
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA4, 0x02, 0xC0, 0x02,                                                             // 233
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA4, 0x02, 0xC8, 0x02,                                                             // 234
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA0, 0x02, 0xC8, 0x02,                                                             // 235
+    0x00, 0x00, 0xE4, 0x03, 0x08,                                                                                           // 236
+    0x08, 0x00, 0xE4, 0x03,                                                                                                 // 237
+    0x08, 0x00, 0xE4, 0x03, 0x08,                                                                                           // 238
+    0x08, 0x00, 0xE0, 0x03, 0x08,                                                                                           // 239
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x38, 0x02, 0xE0, 0x01,                                                             // 240
+    0x00, 0x00, 0xE8, 0x03, 0x24, 0x00, 0x28, 0x00, 0xC4, 0x03,                                                             // 241
+    0x00, 0x00, 0xC0, 0x01, 0x24, 0x02, 0x28, 0x02, 0xC0, 0x01,                                                             // 242
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x24, 0x02, 0xC0, 0x01,                                                             // 243
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x24, 0x02, 0xC8, 0x01,                                                             // 244
+    0x00, 0x00, 0xC8, 0x01, 0x24, 0x02, 0x28, 0x02, 0xC4, 0x01,                                                             // 245
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x20, 0x02, 0xC8, 0x01,                                                             // 246
+    0x40, 0x00, 0x40, 0x00, 0x50, 0x01, 0x40, 0x00, 0x40,                                                                   // 247
+    0x00, 0x00, 0xC0, 0x02, 0xA0, 0x03, 0x60, 0x02, 0xA0, 0x01,                                                             // 248
+    0x00, 0x00, 0xE0, 0x01, 0x04, 0x02, 0x08, 0x02, 0xE0, 0x03,                                                             // 249
+    0x00, 0x00, 0xE0, 0x01, 0x08, 0x02, 0x04, 0x02, 0xE0, 0x03,                                                             // 250
+    0x00, 0x00, 0xE8, 0x01, 0x04, 0x02, 0x08, 0x02, 0xE0, 0x03,                                                             // 251
+    0x00, 0x00, 0xE0, 0x01, 0x08, 0x02, 0x00, 0x02, 0xE8, 0x03,                                                             // 252
+    0x20, 0x00, 0xC0, 0x09, 0x08, 0x06, 0xC4, 0x01, 0x20,                                                                   // 253
+    0x00, 0x00, 0xF8, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 254
+    0x20, 0x00, 0xC8, 0x09, 0x00, 0x06, 0xC8, 0x01, 0x20,                                                                   // 255
+};

src/graphics/fonts/OLEDDisplayFontsPL.h

@@ -0,0 +1,11 @@
+#ifndef OLEDDISPLAYFONTSPL_h
+#define OLEDDISPLAYFONTSPL_h
+
+#ifdef ARDUINO
+#include <Arduino.h>
+#elif __MBED__
+#define PROGMEM
+#endif
+
+extern const uint8_t ArialMT_Plain_10_PL[] PROGMEM;
+#endif

src/graphics/images.h

@@ -20,8 +20,8 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
                                                     0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
 #endif
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS) ||           \
-     ARCH_PORTDUINO) &&                                                                                                          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || defined(ST7789_CS) ||           \
+     defined(USE_ST7789) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                                                             \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

src/input/ExpressLRSFiveWay.cpp

@@ -1,5 +1,5 @@
-
 #include "ExpressLRSFiveWay.h"
+#include "Throttle.h"
 
 #ifdef INPUTBROKER_EXPRESSLRSFIVEWAY_TYPE
 
@@ -76,11 +76,10 @@ void ExpressLRSFiveWay::update(int *keyValue, bool *keyLongPressed)
     *keyValue = NO_PRESS;
 
     int newKey = readKey();
-    uint32_t now = millis();
     if (keyInProcess == NO_PRESS) {
         // New key down
         if (newKey != NO_PRESS) {
-            keyDownStart = now;
+            keyDownStart = millis();
             // DBGLN("down=%u", newKey);
         }
     } else {
@@ -88,7 +87,7 @@ void ExpressLRSFiveWay::update(int *keyValue, bool *keyLongPressed)
         if (newKey == NO_PRESS) {
             // DBGLN("up=%u", keyInProcess);
             if (!isLongPressed) {
-                if ((now - keyDownStart) > KEY_DEBOUNCE_MS) {
+                if (!Throttle::isWithinTimespanMs(keyDownStart, KEY_DEBOUNCE_MS)) {
                     *keyValue = keyInProcess;
                     *keyLongPressed = false;
                 }
@@ -101,7 +100,7 @@ void ExpressLRSFiveWay::update(int *keyValue, bool *keyLongPressed)
         }
         // else still pressing, waiting for long if not already signaled
         else if (!isLongPressed) {
-            if ((now - keyDownStart) > KEY_LONG_PRESS_MS) {
+            if (!Throttle::isWithinTimespanMs(keyDownStart, KEY_LONG_PRESS_MS)) {
                 *keyValue = keyInProcess;
                 *keyLongPressed = true;
                 isLongPressed = true;

src/input/InputBroker.h

@@ -4,6 +4,20 @@
 #define ANYKEY 0xFF
 #define MATRIXKEY 0xFE
 
+#define INPUT_BROKER_MSG_BRIGHTNESS_UP 0x11
+#define INPUT_BROKER_MSG_BRIGHTNESS_DOWN 0x12
+#define INPUT_BROKER_MSG_REBOOT 0x90
+#define INPUT_BROKER_MSG_SHUTDOWN 0x9b
+#define INPUT_BROKER_MSG_GPS_TOGGLE 0x9e
+#define INPUT_BROKER_MSG_MUTE_TOGGLE 0xac
+#define INPUT_BROKER_MSG_SEND_PING 0xaf
+#define INPUT_BROKER_MSG_LEFT 0xb4
+#define INPUT_BROKER_MSG_UP 0xb5
+#define INPUT_BROKER_MSG_DOWN 0xb6
+#define INPUT_BROKER_MSG_RIGHT 0xb7
+#define INPUT_BROKER_MSG_FN_SYMBOL_ON 0xf1
+#define INPUT_BROKER_MSG_FN_SYMBOL_OFF 0xf2
+
 typedef struct _InputEvent {
     const char *source;
     char inputEvent;

src/input/LinuxInput.cpp

@@ -147,11 +147,11 @@ int32_t LinuxInput::runOnce()
                     case KEY_LEFT: // Left
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT;
                         break;
-                        e.kbchar = 0xb4;
+                        e.kbchar = INPUT_BROKER_MSG_LEFT;
                     case KEY_RIGHT: // Right
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
                         break;
-                        e.kbchar = 0xb7;
+                        e.kbchar = INPUT_BROKER_MSG_RIGHT;
                     case KEY_ENTER: // Enter
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
                         break;

src/input/ScanAndSelect.cpp

@@ -6,6 +6,7 @@
 
 #include "ScanAndSelect.h"
 #include "modules/CannedMessageModule.h"
+#include <Throttle.h>
 
 // Config
 static const char name[] = "scanAndSelect"; // should match "allow input source" string
@@ -75,7 +76,7 @@ int32_t ScanAndSelectInput::runOnce()
         else {
             // Duration enough for long press
             // Long press not yet fired (prevent repeat firing while held)
-            if (!longPressFired && now - downSinceMs > durationLongMs) {
+            if (!longPressFired && Throttle::isWithinTimespanMs(downSinceMs, durationLongMs)) {
                 longPressFired = true;
                 longPress();
             }
@@ -91,7 +92,7 @@ int32_t ScanAndSelectInput::runOnce()
         // Long press event didn't already fire
         if (held && !longPressFired) {
             // Duration enough for short press
-            if (now - downSinceMs > durationShortMs) {
+            if (!Throttle::isWithinTimespanMs(downSinceMs, durationShortMs)) {
                 shortPress();
             }
         }

src/input/SerialKeyboard.cpp

@@ -1,5 +1,6 @@
 #include "SerialKeyboard.h"
 #include "configuration.h"
+#include <Throttle.h>
 
 #ifdef INPUTBROKER_SERIAL_TYPE
 #define CANNED_MESSAGE_MODULE_ENABLE 1 // in case it's not set in the variant file
@@ -73,7 +74,7 @@ int32_t SerialKeyboard::runOnce()
         // Serial.print ("X");
         // Serial.println (shiftRegister2, BIN);
 
-        if (millis() - lastPressTime > 500) {
+        if (!Throttle::isWithinTimespanMs(lastPressTime, 500)) {
             quickPress = 0;
         }
 
@@ -87,7 +88,7 @@ int32_t SerialKeyboard::runOnce()
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP;
             } else if (!(shiftRegister2 & (1 << 2))) {
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
-                e.kbchar = 0xb7;
+                e.kbchar = INPUT_BROKER_MSG_RIGHT;
             } else if (!(shiftRegister2 & (1 << 1))) {
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
             } else if (!(shiftRegister2 & (1 << 0))) {

src/input/cardKbI2cImpl.cpp

@@ -9,14 +9,14 @@ CardKbI2cImpl::CardKbI2cImpl() : KbI2cBase("cardKB") {}
 
 void CardKbI2cImpl::init()
 {
-#ifndef ARCH_PORTDUINO
+#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO)
     if (cardkb_found.address == 0x00) {
         LOG_DEBUG("Rescanning for I2C keyboard\n");
         uint8_t i2caddr_scan[] = {CARDKB_ADDR, TDECK_KB_ADDR, BBQ10_KB_ADDR};
         uint8_t i2caddr_asize = 3;
         auto i2cScanner = std::unique_ptr<ScanI2CTwoWire>(new ScanI2CTwoWire());
 
-#if defined(I2C_SDA1)
+#if WIRE_INTERFACES_COUNT == 2
         i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1, i2caddr_scan, i2caddr_asize);
 #endif
         i2cScanner->scanPort(ScanI2C::I2CPort::WIRE, i2caddr_scan, i2caddr_asize);
@@ -57,4 +57,4 @@ void CardKbI2cImpl::init()
     }
 #endif
     inputBroker->registerSource(this);
-}
+}

src/input/kbI2cBase.cpp

@@ -33,7 +33,7 @@ int32_t KbI2cBase::runOnce()
     if (!i2cBus) {
         switch (cardkb_found.port) {
         case ScanI2C::WIRE1:
-#ifdef I2C_SDA1
+#if WIRE_INTERFACES_COUNT == 2
             LOG_DEBUG("Using I2C Bus 1 (the second one)\n");
             i2cBus = &Wire1;
             if (cardkb_found.address == BBQ10_KB_ADDR) {
@@ -94,7 +94,7 @@ int32_t KbI2cBase::runOnce()
                 case 'e': // sym e
                     if (is_sym) {
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP;
-                        e.kbchar = 0xb5;
+                        e.kbchar = INPUT_BROKER_MSG_UP;
                         is_sym = false; // reset sym state after second keypress
                     } else {
                         e.inputEvent = ANYKEY;
@@ -104,7 +104,7 @@ int32_t KbI2cBase::runOnce()
                 case 'x': // sym x
                     if (is_sym) {
                         e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN;
-                        e.kbchar = 0xb6;
+                        e.kbchar = INPUT_BROKER_MSG_DOWN;
                         is_sym = false; // reset sym state after second keypress
                     } else {
                         e.inputEvent = ANYKEY;
@@ -134,8 +134,8 @@ int32_t KbI2cBase::runOnce()
                 case 0x13: // Code scanner says the SYM key is 0x13
                     is_sym = !is_sym;
                     e.inputEvent = ANYKEY;
-                    e.kbchar =
-                        is_sym ? 0xf1 : 0xf2; // send 0xf1 to tell CannedMessages to display that the modifier key is active
+                    e.kbchar = is_sym ? INPUT_BROKER_MSG_FN_SYMBOL_ON   // send 0xf1 to tell CannedMessages to display that
+                                      : INPUT_BROKER_MSG_FN_SYMBOL_OFF; // the modifier key is active
                     break;
                 case 0x0a: // apparently Enter on Q10 is a line feed instead of carriage return
                     e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT;
@@ -214,7 +214,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0xac; // mute notifications
+                    e.kbchar = INPUT_BROKER_MSG_MUTE_TOGGLE; // mute notifications
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -224,7 +224,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0x11; // Increase Brightness code
+                    e.kbchar = INPUT_BROKER_MSG_BRIGHTNESS_UP; // Increase Brightness code
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -234,7 +234,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0x12; // Decrease Brightness code
+                    e.kbchar = INPUT_BROKER_MSG_BRIGHTNESS_DOWN; // Decrease Brightness code
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -244,7 +244,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0xaf; // (fn + space)
+                    e.kbchar = INPUT_BROKER_MSG_SEND_PING; // (fn + space)
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -254,7 +254,7 @@ int32_t KbI2cBase::runOnce()
                 if (is_sym) {
                     is_sym = false;
                     e.inputEvent = ANYKEY;
-                    e.kbchar = 0x9e;
+                    e.kbchar = INPUT_BROKER_MSG_GPS_TOGGLE;
                 } else {
                     e.inputEvent = ANYKEY;
                     e.kbchar = c;
@@ -269,32 +269,33 @@ int32_t KbI2cBase::runOnce()
                 break;
             case 0xb5: // Up
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP;
-                e.kbchar = 0xb5;
+                e.kbchar = INPUT_BROKER_MSG_UP;
                 break;
             case 0xb6: // Down
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN;
-                e.kbchar = 0xb6;
+                e.kbchar = INPUT_BROKER_MSG_DOWN;
                 break;
             case 0xb4: // Left
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT;
-                e.kbchar = 0xb4;
+                e.kbchar = INPUT_BROKER_MSG_LEFT;
                 break;
             case 0xb7: // Right
                 e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT;
-                e.kbchar = 0xb7;
+                e.kbchar = INPUT_BROKER_MSG_RIGHT;
                 break;
             case 0xc: // Modifier key: 0xc is alt+c (Other options could be: 0xea = shift+mic button or 0x4 shift+$(speaker))
                 // toggle moddifiers button.
                 is_sym = !is_sym;
                 e.inputEvent = ANYKEY;
-                e.kbchar = is_sym ? 0xf1 : 0xf2; // send 0xf1 to tell CannedMessages to display that the modifier key is active
+                e.kbchar = is_sym ? INPUT_BROKER_MSG_FN_SYMBOL_ON   // send 0xf1 to tell CannedMessages to display that the
+                                  : INPUT_BROKER_MSG_FN_SYMBOL_OFF; // modifier key is active
                 break;
-            case 0x90: // fn+r
+            case 0x90: // fn+r      INPUT_BROKER_MSG_REBOOT
             case 0x91: // fn+t
-            case 0x9b: // fn+s
-            case 0xac: // fn+m
-            case 0x9e: // fn+g
-            case 0xaf: // fn+space
+            case 0x9b: // fn+s      INPUT_BROKER_MSG_SHUTDOWN
+            case 0xac: // fn+m      INPUT_BROKER_MSG_MUTE_TOGGLE
+            case 0x9e: // fn+g      INPUT_BROKER_MSG_GPS_TOGGLE
+            case 0xaf: // fn+space  INPUT_BROKER_MSG_SEND_PING
                 // just pass those unmodified
                 e.inputEvent = ANYKEY;
                 e.kbchar = c;

src/main.cpp

@@ -11,16 +11,16 @@
 #include "airtime.h"
 #include "buzz.h"
 
-#include "error.h"
-#include "power.h"
-// #include "debug.h"
 #include "FSCommon.h"
 #include "Led.h"
 #include "RTC.h"
 #include "SPILock.h"
+#include "Throttle.h"
 #include "concurrency/OSThread.h"
 #include "concurrency/Periodic.h"
 #include "detect/ScanI2C.h"
+#include "error.h"
+#include "power.h"
 
 #if !MESHTASTIC_EXCLUDE_I2C
 #include "detect/ScanI2CTwoWire.h"
@@ -38,7 +38,6 @@
 #include "target_specific.h"
 #include <memory>
 #include <utility>
-// #include <driver/rtc_io.h>
 
 #ifdef ARCH_ESP32
 #if !MESHTASTIC_EXCLUDE_WEBSERVER
@@ -112,6 +111,10 @@ AccelerometerThread *accelerometerThread = nullptr;
 AudioThread *audioThread = nullptr;
 #endif
 
+#if defined(TCXO_OPTIONAL)
+float tcxoVoltage = SX126X_DIO3_TCXO_VOLTAGE; // if TCXO is optional, put this here so it can be changed further down.
+#endif
+
 using namespace concurrency;
 
 // We always create a screen object, but we only init it if we find the hardware
@@ -220,6 +223,11 @@ __attribute__((weak, noinline)) bool loopCanSleep()
     return true;
 }
 
+// Weak empty variant initialization function.
+// May be redefined by variant files.
+void lateInitVariant() __attribute__((weak));
+void lateInitVariant() {}
+
 /**
  * Print info as a structured log message (for automated log processing)
  */
@@ -227,7 +235,7 @@ void printInfo()
 {
     LOG_INFO("S:B:%d,%s\n", HW_VENDOR, optstr(APP_VERSION));
 }
-
+#ifndef PIO_UNIT_TESTING
 void setup()
 {
     concurrency::hasBeenSetup = true;
@@ -253,6 +261,12 @@ void setup()
 
 #ifdef DEBUG_PORT
     consoleInit(); // Set serial baud rate and init our mesh console
+#endif
+#if ARCH_PORTDUINO
+    struct timeval tv;
+    tv.tv_sec = time(NULL);
+    tv.tv_usec = 0;
+    perhapsSetRTC(RTCQualityNTP, &tv);
 #endif
     powerMonInit();
 
@@ -274,39 +288,9 @@ void setup()
     digitalWrite(LORA_TCXO_GPIO, HIGH);
 #endif
 
-#if defined(VEXT_ENABLE_V03)
-    pinMode(VEXT_ENABLE_V03, OUTPUT);
-    pinMode(ST7735_BL_V03, OUTPUT);
-    digitalWrite(VEXT_ENABLE_V03, 0); // turn on the display power and antenna boost
-    digitalWrite(ST7735_BL_V03, 1);   // display backligth on
-    LOG_DEBUG("HELTEC Detect Tracker V1.0\n");
-#elif defined(VEXT_ENABLE_V05)
-    pinMode(VEXT_ENABLE_V05, OUTPUT);
-    pinMode(ST7735_BL_V05, OUTPUT);
-    digitalWrite(VEXT_ENABLE_V05, 1); // turn on the lora antenna boost
-    digitalWrite(ST7735_BL_V05, 1);   // turn on display backligth
-    LOG_DEBUG("HELTEC Detect Tracker V1.1\n");
-#elif defined(VEXT_ENABLE) && defined(VEXT_ON_VALUE)
+#if defined(VEXT_ENABLE)
     pinMode(VEXT_ENABLE, OUTPUT);
     digitalWrite(VEXT_ENABLE, VEXT_ON_VALUE); // turn on the display power
-#elif defined(VEXT_ENABLE)
-    pinMode(VEXT_ENABLE, OUTPUT);
-    digitalWrite(VEXT_ENABLE, 0); // turn on the display power
-#endif
-
-#if defined(VGNSS_CTRL_V03)
-    pinMode(VGNSS_CTRL_V03, OUTPUT);
-    digitalWrite(VGNSS_CTRL_V03, LOW);
-#endif
-
-#if defined(VTFT_CTRL_V03)
-    pinMode(VTFT_CTRL_V03, OUTPUT);
-    digitalWrite(VTFT_CTRL_V03, LOW);
-#endif
-
-#if defined(VGNSS_CTRL)
-    pinMode(VGNSS_CTRL, OUTPUT);
-    digitalWrite(VGNSS_CTRL, LOW);
 #endif
 
 #if defined(VTFT_CTRL)
@@ -375,6 +359,8 @@ void setup()
     Wire1.begin();
 #elif defined(I2C_SDA1) && !defined(ARCH_RP2040)
     Wire1.begin(I2C_SDA1, I2C_SCL1);
+#elif WIRE_INTERFACES_COUNT == 2
+    Wire1.begin();
 #endif
 
 #if defined(I2C_SDA) && defined(ARCH_RP2040)
@@ -405,7 +391,7 @@ void setup()
 #endif
 
 #ifdef AQ_SET_PIN
-    // RAK-12039 set pin for Air quality sensor
+    // RAK-12039 set pin for Air quality sensor. Detectable on I2C after ~3 seconds, so we need to rescan later
     pinMode(AQ_SET_PIN, OUTPUT);
     digitalWrite(AQ_SET_PIN, HIGH);
 #endif
@@ -442,6 +428,8 @@ void setup()
 #elif defined(I2C_SDA1) && !defined(ARCH_RP2040)
     Wire1.begin(I2C_SDA1, I2C_SCL1);
     i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1);
+#elif defined(NRF52840_XXAA) && (WIRE_INTERFACES_COUNT == 2)
+    i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1);
 #endif
 
 #if defined(I2C_SDA) && defined(ARCH_RP2040)
@@ -562,6 +550,7 @@ void setup()
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BME_680, meshtastic_TelemetrySensorType_BME680)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BME_280, meshtastic_TelemetrySensorType_BME280)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BMP_280, meshtastic_TelemetrySensorType_BMP280)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BMP_3XX, meshtastic_TelemetrySensorType_BMP3XX)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BMP_085, meshtastic_TelemetrySensorType_BMP085)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::INA260, meshtastic_TelemetrySensorType_INA260)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::INA219, meshtastic_TelemetrySensorType_INA219)
@@ -574,6 +563,7 @@ void setup()
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMC6310, meshtastic_TelemetrySensorType_QMC6310)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMI8658, meshtastic_TelemetrySensorType_QMI8658)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMC5883L, meshtastic_TelemetrySensorType_QMC5883L)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::HMC5883L, meshtastic_TelemetrySensorType_QMC5883L)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::PMSA0031, meshtastic_TelemetrySensorType_PMSA003I)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::RCWL9620, meshtastic_TelemetrySensorType_RCWL9620)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::VEML7700, meshtastic_TelemetrySensorType_VEML7700)
@@ -600,6 +590,9 @@ void setup()
 
     // Hello
     printInfo();
+#ifdef BUILD_EPOCH
+    LOG_INFO("Build timestamp: %ld\n", BUILD_EPOCH);
+#endif
 
 #ifdef ARCH_ESP32
     esp32Setup();
@@ -649,8 +642,6 @@ void setup()
 #if !MESHTASTIC_EXCLUDE_I2C
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
     if (acc_info.type != ScanI2C::DeviceType::NONE) {
-        config.display.wake_on_tap_or_motion = true;
-        moduleConfig.external_notification.enabled = true;
         accelerometerThread = new AccelerometerThread(acc_info.type);
     }
 #endif
@@ -761,8 +752,8 @@ void setup()
 #if !MESHTASTIC_EXCLUDE_I2C
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)
-#if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS) || defined(HX8357_CS) ||            \
-    defined(USE_ST7789)
+#if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7789_CS) ||            \
+    defined(HX8357_CS) || defined(USE_ST7789)
     screen->setup();
 #elif defined(ARCH_PORTDUINO)
     if (screen_found.port != ScanI2C::I2CPort::NO_I2C || settingsMap[displayPanel]) {
@@ -776,12 +767,6 @@ void setup()
 
     screen->print("Started...\n");
 
-#ifdef SX126X_ANT_SW
-    // make analog PA vs not PA switch on SX126x eval board work properly
-    pinMode(SX126X_ANT_SW, OUTPUT);
-    digitalWrite(SX126X_ANT_SW, 1);
-#endif
-
 #ifdef PIN_PWR_DELAY_MS
     // This may be required to give the peripherals time to power up.
     delay(PIN_PWR_DELAY_MS);
@@ -900,7 +885,7 @@ void setup()
     }
 #endif
 
-#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO)
+#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && !defined(TCXO_OPTIONAL)
     if (!rIf) {
         rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
         if (!rIf->init()) {
@@ -914,6 +899,40 @@ void setup()
     }
 #endif
 
+#if defined(USE_SX1262) && !defined(ARCH_PORTDUINO) && defined(TCXO_OPTIONAL)
+    if (!rIf) {
+        // Try using the specified TCXO voltage
+        rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("Failed to find SX1262 radio with TCXO using DIO3 reference voltage at %f V\n", tcxoVoltage);
+            delete rIf;
+            rIf = NULL;
+            tcxoVoltage = 0; // if it fails, set the TCXO voltage to zero for the next attempt
+        } else {
+            LOG_INFO("SX1262 Radio init succeeded, using ");
+            LOG_WARN("SX1262 Radio with TCXO");
+            LOG_INFO(", reference voltage at %f V\n", tcxoVoltage);
+            radioType = SX1262_RADIO;
+        }
+    }
+
+    if (!rIf) {
+        // If specified TCXO voltage fails, attempt to use DIO3 as a reference instea
+        rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
+        if (!rIf->init()) {
+            LOG_WARN("Failed to find SX1262 radio with XTAL using DIO3 reference voltage at %f V\n", tcxoVoltage);
+            delete rIf;
+            rIf = NULL;
+            tcxoVoltage = SX126X_DIO3_TCXO_VOLTAGE; // if it fails, set the TCXO voltage back for the next radio search
+        } else {
+            LOG_INFO("SX1262 Radio init succeeded, using ");
+            LOG_WARN("SX1262 Radio with XTAL");
+            LOG_INFO(", reference voltage at %f V\n", tcxoVoltage);
+            radioType = SX1262_RADIO;
+        }
+    }
+#endif
+
 #if defined(USE_SX1268)
     if (!rIf) {
         rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY);
@@ -995,6 +1014,8 @@ void setup()
         }
     }
 
+    lateInitVariant(); // Do board specific init (see extra_variants/README.md for documentation)
+
 #if !MESHTASTIC_EXCLUDE_MQTT
     mqttInit();
 #endif
@@ -1052,7 +1073,7 @@ void setup()
     powerFSMthread = new PowerFSMThread();
     setCPUFast(false); // 80MHz is fine for our slow peripherals
 }
-
+#endif
 uint32_t rebootAtMsec;   // If not zero we will reboot at this time (used to reboot shortly after the update completes)
 uint32_t shutdownAtMsec; // If not zero we will shutdown at this time (used to shutdown from python or mobile client)
 
@@ -1073,17 +1094,16 @@ extern meshtastic_DeviceMetadata getDeviceMetadata()
     deviceMetadata.position_flags = config.position.position_flags;
     deviceMetadata.hw_model = HW_VENDOR;
     deviceMetadata.hasRemoteHardware = moduleConfig.remote_hardware.enabled;
+#if !(MESHTASTIC_EXCLUDE_PKI)
+    deviceMetadata.hasPKC = true;
+#endif
     return deviceMetadata;
 }
-
+#ifndef PIO_UNIT_TESTING
 void loop()
 {
     runASAP = false;
 
-    // axpDebugOutput.loop();
-
-    // heap_caps_check_integrity_all(true); // FIXME - disable this expensive check
-
 #ifdef ARCH_ESP32
     esp32Loop();
 #endif
@@ -1092,32 +1112,21 @@ void loop()
 #endif
     powerCommandsCheck();
 
-    // For debugging
-    // if (rIf) ((RadioLibInterface *)rIf)->isActivelyReceiving();
-
 #ifdef DEBUG_STACK
     static uint32_t lastPrint = 0;
-    if (millis() - lastPrint > 10 * 1000L) {
+    if (!Throttle::isWithinTimespanMs(lastPrint, 10 * 1000L)) {
         lastPrint = millis();
         meshtastic::printThreadInfo("main");
     }
 #endif
 
-    // TODO: This should go into a thread handled by FreeRTOS.
-    // handleWebResponse();
-
     service->loop();
 
     long delayMsec = mainController.runOrDelay();
 
-    /* if (mainController.nextThread && delayMsec)
-        LOG_DEBUG("Next %s in %ld\n", mainController.nextThread->ThreadName.c_str(),
-                  mainController.nextThread->tillRun(millis())); */
-
     // We want to sleep as long as possible here - because it saves power
     if (!runASAP && loopCanSleep()) {
-        // if(delayMsec > 100) LOG_DEBUG("sleeping %ld\n", delayMsec);
         mainDelay.delay(delayMsec);
     }
-    // if (didWake) LOG_DEBUG("wake!\n");
-}
+}
+#endif

src/mesh/Channels.cpp

@@ -13,10 +13,6 @@
 #include "mqtt/MQTT.h"
 #endif
 
-/// 16 bytes of random PSK for our _public_ default channel that all devices power up on (AES128)
-static const uint8_t defaultpsk[] = {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59,
-                                     0xf0, 0xbc, 0xff, 0xab, 0xcf, 0x4e, 0x69, 0x01};
-
 Channels channels;
 
 const char *Channels::adminChannel = "admin";
@@ -97,7 +93,7 @@ void Channels::initDefaultChannel(ChannelIndex chIndex)
     channelSettings.psk.bytes[0] = defaultpskIndex;
     channelSettings.psk.size = 1;
     strncpy(channelSettings.name, "", sizeof(channelSettings.name));
-    channelSettings.module_settings.position_precision = 32; // default to sending location on the primary channel
+    channelSettings.module_settings.position_precision = 13; // default to sending location on the primary channel
     channelSettings.has_module_settings = true;
 
     ch.has_settings = true;
@@ -363,4 +359,4 @@ bool Channels::decryptForHash(ChannelIndex chIndex, ChannelHash channelHash)
 int16_t Channels::setActiveByIndex(ChannelIndex channelIndex)
 {
     return setCrypto(channelIndex);
-}
+}

src/mesh/Channels.h

@@ -129,4 +129,12 @@ class Channels
 };
 
 /// Singleton channel table
-extern Channels channels;
+extern Channels channels;
+
+/// 16 bytes of random PSK for our _public_ default channel that all devices power up on (AES128)
+static const uint8_t defaultpsk[] = {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59,
+                                     0xf0, 0xbc, 0xff, 0xab, 0xcf, 0x4e, 0x69, 0x01};
+
+static const uint8_t eventpsk[] = {0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36,
+                                   0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74,
+                                   0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1};

src/mesh/CryptoEngine.cpp

@@ -1,6 +1,217 @@
 #include "CryptoEngine.h"
+#include "NodeDB.h"
+#include "RadioInterface.h"
+#include "architecture.h"
 #include "configuration.h"
 
+#if !(MESHTASTIC_EXCLUDE_PKI)
+#include "aes-ccm.h"
+#include "meshUtils.h"
+#include <Crypto.h>
+#include <Curve25519.h>
+#include <SHA256.h>
+#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN)
+
+/**
+ * Create a public/private key pair with Curve25519.
+ *
+ * @param pubKey The destination for the public key.
+ * @param privKey The destination for the private key.
+ */
+void CryptoEngine::generateKeyPair(uint8_t *pubKey, uint8_t *privKey)
+{
+    LOG_DEBUG("Generating Curve25519 key pair...\n");
+    Curve25519::dh1(public_key, private_key);
+    memcpy(pubKey, public_key, sizeof(public_key));
+    memcpy(privKey, private_key, sizeof(private_key));
+}
+
+/**
+ * regenerate a public key with Curve25519.
+ *
+ * @param pubKey The destination for the public key.
+ * @param privKey The source for the private key.
+ */
+bool CryptoEngine::regeneratePublicKey(uint8_t *pubKey, uint8_t *privKey)
+{
+    if (!memfll(privKey, 0, sizeof(private_key))) {
+        Curve25519::eval(pubKey, privKey, 0);
+        if (Curve25519::isWeakPoint(pubKey)) {
+            LOG_ERROR("PKI key generation failed. Specified private key results in a weak\n");
+            memset(pubKey, 0, 32);
+            return false;
+        }
+        memcpy(private_key, privKey, sizeof(private_key));
+        memcpy(public_key, pubKey, sizeof(public_key));
+    } else {
+        LOG_WARN("X25519 key generation failed due to blank private key\n");
+        return false;
+    }
+    return true;
+}
+#endif
+void CryptoEngine::clearKeys()
+{
+    memset(public_key, 0, sizeof(public_key));
+    memset(private_key, 0, sizeof(private_key));
+}
+
+/**
+ * Encrypt a packet's payload using a key generated with Curve25519 and SHA256
+ * for a specific node.
+ *
+ * @param bytes is updated in place
+ */
+bool CryptoEngine::encryptCurve25519(uint32_t toNode, uint32_t fromNode, uint64_t packetNum, size_t numBytes, uint8_t *bytes,
+                                     uint8_t *bytesOut)
+{
+    uint8_t *auth;
+    uint32_t *extraNonce;
+    long extraNonceTmp = random();
+    auth = bytesOut + numBytes;
+    extraNonce = (uint32_t *)(auth + 8);
+    *extraNonce = extraNonceTmp;
+    LOG_INFO("Random nonce value: %d\n", *extraNonce);
+    meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(toNode);
+    if (node->num < 1 || node->user.public_key.size == 0) {
+        LOG_DEBUG("Node %d or their public_key not found\n", toNode);
+        return false;
+    }
+    if (!crypto->setDHKey(toNode)) {
+        return false;
+    }
+    initNonce(fromNode, packetNum, *extraNonce);
+
+    // Calculate the shared secret with the destination node and encrypt
+    printBytes("Attempting encrypt using nonce: ", nonce, 13);
+    printBytes("Attempting encrypt using shared_key starting with: ", shared_key, 8);
+    aes_ccm_ae(shared_key, 32, nonce, 8, bytes, numBytes, nullptr, 0, bytesOut,
+               auth); // this can write up to 15 bytes longer than numbytes past bytesOut
+    *extraNonce = extraNonceTmp;
+    return true;
+}
+
+/**
+ * Decrypt a packet's payload using a key generated with Curve25519 and SHA256
+ * for a specific node.
+ *
+ * @param bytes is updated in place
+ */
+bool CryptoEngine::decryptCurve25519(uint32_t fromNode, uint64_t packetNum, size_t numBytes, uint8_t *bytes, uint8_t *bytesOut)
+{
+    uint8_t *auth; // set to last 8 bytes of text?
+    uint32_t *extraNonce;
+    auth = bytes + numBytes - 12;
+    extraNonce = (uint32_t *)(auth + 8);
+    LOG_INFO("Random nonce value: %d\n", *extraNonce);
+    meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(fromNode);
+
+    if (node == nullptr || node->num < 1 || node->user.public_key.size == 0) {
+        LOG_DEBUG("Node or its public key not found in database\n");
+        return false;
+    }
+
+    // Calculate the shared secret with the sending node and decrypt
+    if (!crypto->setDHKey(fromNode)) {
+        return false;
+    }
+    initNonce(fromNode, packetNum, *extraNonce);
+    printBytes("Attempting decrypt using nonce: ", nonce, 13);
+    printBytes("Attempting decrypt using shared_key starting with: ", shared_key, 8);
+    return aes_ccm_ad(shared_key, 32, nonce, 8, bytes, numBytes - 12, nullptr, 0, auth, bytesOut);
+}
+
+void CryptoEngine::setDHPrivateKey(uint8_t *_private_key)
+{
+    memcpy(private_key, _private_key, 32);
+}
+/**
+ * Set the PKI key used for encrypt, decrypt.
+ *
+ * @param nodeNum the node number of the node who's public key we want to use
+ */
+bool CryptoEngine::setDHKey(uint32_t nodeNum)
+{
+    meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeNum);
+    if (node->num < 1 || node->user.public_key.size == 0) {
+        LOG_DEBUG("Node %d or their public_key not found\n", nodeNum);
+        return false;
+    }
+    printBytes("Generating DH with remote pubkey: ", node->user.public_key.bytes, 32);
+    printBytes("And local pubkey: ", config.security.public_key.bytes, 32);
+    if (!setDHPublicKey(node->user.public_key.bytes))
+        return false;
+
+    // printBytes("DH Output: ", shared_key, 32);
+
+    /**
+     * D.J. Bernstein reccomends hashing the shared key. We want to do this because there are
+     * at least 128 bits of entropy in the 256-bit output of the DH key exchange, but we don't
+     * really know where. If you extract, for instance, the first 128 bits with basic truncation,
+     * then you don't know if you got all of your 128 entropy bits, or less, possibly much less.
+     *
+     * No exploitable bias is really known at that point, but we know enough to be wary.
+     * Hashing the DH output is a simple and safe way to gather all the entropy and spread
+     * it around as needed.
+     */
+    crypto->hash(shared_key, 32);
+    return true;
+}
+
+/**
+ * Hash arbitrary data using SHA256.
+ *
+ * @param bytes
+ * @param numBytes
+ */
+void CryptoEngine::hash(uint8_t *bytes, size_t numBytes)
+{
+    SHA256 hash;
+    size_t posn, len;
+    uint8_t size = numBytes;
+    uint8_t inc = 16;
+    hash.reset();
+    for (posn = 0; posn < size; posn += inc) {
+        len = size - posn;
+        if (len > inc)
+            len = inc;
+        hash.update(bytes + posn, len);
+    }
+    hash.finalize(bytes, 32);
+}
+
+void CryptoEngine::aesSetKey(const uint8_t *key_bytes, size_t key_len)
+{
+    if (aes) {
+        delete aes;
+        aes = nullptr;
+    }
+    if (key_len != 0) {
+        aes = new AESSmall256();
+        aes->setKey(key_bytes, key_len);
+    }
+}
+
+void CryptoEngine::aesEncrypt(uint8_t *in, uint8_t *out)
+{
+    aes->encryptBlock(out, in);
+}
+
+bool CryptoEngine::setDHPublicKey(uint8_t *pubKey)
+{
+    uint8_t local_priv[32];
+    memcpy(shared_key, pubKey, 32);
+    memcpy(local_priv, private_key, 32);
+    // Calculate the shared secret with the specified node's public key and our private key
+    // This includes an internal weak key check, which among other things looks for an all 0 public key and shared key.
+    if (!Curve25519::dh2(shared_key, local_priv)) {
+        LOG_WARN("Curve25519DH step 2 failed!\n");
+        return false;
+    }
+    return true;
+}
+
+#endif
 concurrency::Lock *cryptLock;
 
 void CryptoEngine::setKey(const CryptoKey &k)
@@ -14,24 +225,59 @@ void CryptoEngine::setKey(const CryptoKey &k)
  *
  * @param bytes is updated in place
  */
-void CryptoEngine::encrypt(uint32_t fromNode, uint64_t packetId, size_t numBytes, uint8_t *bytes)
+void CryptoEngine::encryptPacket(uint32_t fromNode, uint64_t packetId, size_t numBytes, uint8_t *bytes)
 {
-    LOG_WARN("noop encryption!\n");
+    if (key.length > 0) {
+        initNonce(fromNode, packetId);
+        if (numBytes <= MAX_BLOCKSIZE) {
+            encryptAESCtr(key, nonce, numBytes, bytes);
+        } else {
+            LOG_ERROR("Packet too large for crypto engine: %d. noop encryption!\n", numBytes);
+        }
+    }
 }
 
 void CryptoEngine::decrypt(uint32_t fromNode, uint64_t packetId, size_t numBytes, uint8_t *bytes)
 {
-    LOG_WARN("noop decryption!\n");
+    // For CTR, the implementation is the same
+    encryptPacket(fromNode, packetId, numBytes, bytes);
+}
+
+// Generic implementation of AES-CTR encryption.
+void CryptoEngine::encryptAESCtr(CryptoKey _key, uint8_t *_nonce, size_t numBytes, uint8_t *bytes)
+{
+    if (ctr) {
+        delete ctr;
+        ctr = nullptr;
+    }
+    if (_key.length == 16)
+        ctr = new CTR<AES128>();
+    else
+        ctr = new CTR<AES256>();
+    ctr->setKey(_key.bytes, _key.length);
+    static uint8_t scratch[MAX_BLOCKSIZE];
+    memcpy(scratch, bytes, numBytes);
+    memset(scratch + numBytes, 0,
+           sizeof(scratch) - numBytes); // Fill rest of buffer with zero (in case cypher looks at it)
+
+    ctr->setIV(_nonce, 16);
+    ctr->setCounterSize(4);
+    ctr->encrypt(bytes, scratch, numBytes);
 }
 
 /**
  * Init our 128 bit nonce for a new packet
  */
-void CryptoEngine::initNonce(uint32_t fromNode, uint64_t packetId)
+void CryptoEngine::initNonce(uint32_t fromNode, uint64_t packetId, uint32_t extraNonce)
 {
     memset(nonce, 0, sizeof(nonce));
 
     // use memcpy to avoid breaking strict-aliasing
     memcpy(nonce, &packetId, sizeof(uint64_t));
     memcpy(nonce + sizeof(uint64_t), &fromNode, sizeof(uint32_t));
-}
+    if (extraNonce)
+        memcpy(nonce + sizeof(uint32_t), &extraNonce, sizeof(uint32_t));
+}
+#ifndef HAS_CUSTOM_CRYPTO_ENGINE
+CryptoEngine *crypto = new CryptoEngine;
+#endif