Upgrade trunk (#8781)

Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: composite
   steps:
     - name: Checkout code
-      uses: actions/checkout@v5
+      uses: actions/checkout@v6
       with:
         submodules: recursive
         ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_debian_src.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/build_firmware.yml

@@ -22,7 +22,7 @@ jobs:
     outputs:
       artifact-id: ${{ steps.upload.outputs.artifact-id }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/build_one_arch.yml

@@ -26,7 +26,7 @@ jobs:
   setup:
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -44,7 +44,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -108,7 +108,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/build_one_target.yml

@@ -45,7 +45,7 @@ jobs:
 
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -66,7 +66,7 @@ jobs:
     if: ${{ inputs.target != '' }}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -114,7 +114,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/docker_build.yml

@@ -47,7 +47,7 @@ jobs:
     runs-on: ${{ inputs.runs-on }}
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/docker_manifest.yml

@@ -83,7 +83,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/hook_copr.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{ github.ref }}

.github/workflows/main_matrix.yml

@@ -35,7 +35,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -59,7 +59,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -81,7 +81,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' && github.repository == 'meshtastic/firmware' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -163,7 +163,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -242,7 +242,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -311,7 +311,7 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -366,7 +366,7 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/merge_queue.yml

@@ -17,7 +17,7 @@ jobs:
           - check
     runs-on: ubuntu-24.04
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - uses: actions/setup-python@v6
         with:
           python-version: 3.x
@@ -40,7 +40,7 @@ jobs:
   version:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Get release version string
         run: |
           echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
@@ -62,7 +62,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -142,7 +142,7 @@ jobs:
     needs: [version, build]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -221,7 +221,7 @@ jobs:
       - package-pio-deps-native-tft
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -290,7 +290,7 @@ jobs:
     needs: [release-artifacts, version]
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6
@@ -345,7 +345,7 @@ jobs:
         esp32,esp32s3,esp32c3,esp32c6,nrf52840,rp2040,rp2350,stm32
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/nightly.yml

@@ -14,7 +14,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1
@@ -31,7 +31,7 @@ jobs:
       pull-requests: write # For trunk to create PRs
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Upgrade
         uses: trunk-io/trunk-action/upgrade@v1

.github/workflows/package_obs.yml

@@ -34,7 +34,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/package_pio_deps.yml

@@ -24,7 +24,7 @@ jobs:
     runs-on: ubuntu-24.04
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}

.github/workflows/package_ppa.yml

@@ -32,7 +32,7 @@ jobs:
     needs: build-debian-src
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: recursive
           path: meshtasticd

.github/workflows/pr_tests.yml

@@ -40,7 +40,7 @@ jobs:
       checks: write
       pull-requests: write
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           submodules: recursive
 

.github/workflows/release_channels.yml

@@ -60,7 +60,10 @@ jobs:
         shell: bash
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
+        with:
+          # Always use master branch for version bumps
+          ref: master
 
       - name: Setup Python
         uses: actions/setup-python@v6

.github/workflows/sec_sast_semgrep_cron.yml

@@ -21,7 +21,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       # step 2
       - name: full scan

.github/workflows/sec_sast_semgrep_pull.yml

@@ -13,7 +13,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           fetch-depth: 0
 

.github/workflows/test_native.yml

@@ -14,7 +14,7 @@ jobs:
     name: Native Simulator Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -70,7 +70,7 @@ jobs:
     name: Native PlatformIO Tests
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -127,7 +127,7 @@ jobs:
       - platformio-tests
     if: always()
     steps:
-      - uses: actions/checkout@v5
+      - uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -143,7 +143,7 @@ jobs:
           merge-multiple: true
 
       - name: Test Report
-        uses: dorny/test-reporter@v2.1.1
+        uses: dorny/test-reporter@v2.2.0
         with:
           name: PlatformIO Tests
           path: testreport.xml

.github/workflows/tests.yml

@@ -20,7 +20,7 @@ jobs:
     runs-on: test-runner
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       # - uses: actions/setup-python@v5
       #   with:

.github/workflows/trunk_annotate_pr.yml

@@ -18,7 +18,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/trunk_format_pr.yml

@@ -15,7 +15,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}

.github/workflows/update_protobufs.yml

@@ -11,7 +11,7 @@ jobs:
       pull-requests: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v5
+        uses: actions/checkout@v6
         with:
           submodules: true
 

.trunk/trunk.yaml

@@ -4,31 +4,31 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.7.3
+      ref: v1.7.4
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.489
-    - renovate@41.169.1
-    - prettier@3.6.2
-    - trufflehog@3.90.12
+    - checkov@3.2.495
+    - renovate@42.26.3
+    - prettier@3.7.1
+    - trufflehog@3.91.1
     - yamllint@1.37.1
-    - bandit@1.8.6
+    - bandit@1.9.2
     - trivy@0.67.2
     - taplo@0.10.0
-    - ruff@0.14.3
+    - ruff@0.14.6
     - isort@7.0.0
-    - markdownlint@0.45.0
+    - markdownlint@0.46.0
     - oxipng@9.1.5
     - svgo@4.0.0
-    - actionlint@1.7.8
+    - actionlint@1.7.9
     - flake8@7.3.0
     - hadolint@2.14.0
     - shfmt@3.6.0
     - shellcheck@0.11.0
-    - black@25.9.0
+    - black@25.11.0
     - git-diff-check
-    - gitleaks@8.28.0
+    - gitleaks@8.30.0
     - clang-format@16.0.3
   ignore:
     - linters: [ALL]

README.md

@@ -37,4 +37,3 @@ Join our community and help improve Meshtastic! 🚀
 ## Stats
 
 ![Alt](https://repobeats.axiom.co/api/embed/8025e56c482ec63541593cc5bd322c19d5c0bdcf.svg "Repobeats analytics image")
-

arch/nrf52/nrf52.ini

@@ -7,7 +7,7 @@ extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   # TODO renovate
-  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#e13f5820002a4fb2a5e6754b42ace185277e5adf
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
   ; Don't renovate toolchain-gccarmnoneeabi
   platformio/toolchain-gccarmnoneeabi@~1.90301.0
 

arch/nrf52/nrf52840.ini

@@ -8,7 +8,7 @@ lib_deps =
   ${environmental_base.lib_deps}
   ${environmental_extra.lib_deps}
   # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
-  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
 
 ; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
 

arch/stm32/stm32.ini

@@ -2,7 +2,7 @@
 extends = arduino_base
 platform =
   # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
-  platformio/ststm32@19.3.0
+  platformio/ststm32@19.4.0
 platform_packages =
   # TODO renovate
   platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,12 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.16" date="2025-11-19">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.16</url>
+    </release>
+    <release version="2.7.15" date="2025-11-13">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.15</url>
+    </release>
     <release version="2.7.14" date="2025-11-03">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.14</url>
     </release>

boards/ThinkNode-M3.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_eink",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M3",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "elecrow nrf",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "",
+  "vendor": "ELECROW"
+}

boards/ThinkNode-M6.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_ELECROW_M6 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "elecrow_thinknode_m6",
+    "mcu": "nrf52840",
+    "variant": "ELECROW-ThinkNode-M6",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "ELECROW ThinkNode M6",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.elecrow.com/thinknode-m6-outdoor-solar-power-for-lora-powered-by-nrf52840-supports-gps.html",
+  "vendor": "ELECROW"
+}

boards/muzi-base.json

@@ -0,0 +1,56 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_MUZI_BASE -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0xcafe"]],
+    "mcu": "nrf52840",
+    "variant": "muzi-base",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Muzi Base",
+  "url": "https://muzi.works/",
+  "vendor": "MuziWorks",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "blackmagic",
+      "cmsis-dap",
+      "mbed",
+      "stlink"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  }
+}

debian/changelog

@@ -1,3 +1,16 @@
+meshtasticd (2.7.16.0) unstable; urgency=medium
+
+  * Version 2.7.16
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Wed, 19 Nov 2025 16:12:32 +0000
+
+
+meshtasticd (2.7.15.0) unstable; urgency=medium
+
+  * Version 2.7.15
+
+ -- GitHub Actions <github-actions[bot]@users.noreply.github.com>  Thu, 13 Nov 2025 12:31:57 +0000
+
 meshtasticd (2.7.14.0) unstable; urgency=medium
 
   * Version 2.7.14

meshtasticd.spec.rpkg

@@ -50,6 +50,13 @@ BuildRequires: pkgconfig(x11)
 BuildRequires: pkgconfig(libinput)
 BuildRequires: pkgconfig(xkbcommon-x11)
 
+# libbsd is needed on older Fedora/RHEL to provide 'strlcpy'
+%if 0%{?fedora} >= 39 || 0%{?rhel} >= 10
+BuildRequires: glibc-devel >= 2.38
+%else
+BuildRequires: pkgconfig(libbsd-overlay)
+%endif
+
 Requires:      systemd-udev
 
 %description

platformio.ini

@@ -62,7 +62,7 @@ monitor_speed = 115200
 monitor_filters = direct
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-esp8266-oled-ssd1306 packageName=https://github.com/meshtastic/esp8266-oled-ssd1306 gitBranch=master
-	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/0cbc26b1f8f61957af0475f486b362eafe7cc4e2.zip
+	https://github.com/meshtastic/esp8266-oled-ssd1306/archive/2887bf4a19f64d92c984dcc8fd5ca7429e425e4a.zip
 	# renovate: datasource=git-refs depName=meshtastic-OneButton packageName=https://github.com/meshtastic/OneButton gitBranch=master
 	https://github.com/meshtastic/OneButton/archive/fa352d668c53f290cfa480a5f79ad422cd828c70.zip
 	# renovate: datasource=git-refs depName=meshtastic-arduino-fsm packageName=https://github.com/meshtastic/arduino-fsm gitBranch=master
@@ -90,7 +90,7 @@ framework = arduino
 lib_deps =
 	${env.lib_deps}
 	# renovate: datasource=custom.pio depName=NonBlockingRTTTL packageName=end2endzone/library/NonBlockingRTTTL
-	end2endzone/NonBlockingRTTTL@1.3.0
+	end2endzone/NonBlockingRTTTL@1.4.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/> -<graphics/niche/>
 
@@ -121,7 +121,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/19b7855e9a1d9deff37391659ca7194e4ef57c43.zip
+	https://github.com/meshtastic/device-ui/archive/28167c67dfd13015a0b5eef1828f95fe8e3ab7c3.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -169,7 +169,7 @@ lib_deps =
 	# renovate: datasource=git-refs depName=DFRobot_RainfallSensor packageName=https://github.com/DFRobot/DFRobot_RainfallSensor gitBranch=master
 	https://github.com/DFRobot/DFRobot_RainfallSensor/archive/38fea5e02b40a5430be6dab39a99a6f6347d667e.zip
 	# renovate: datasource=custom.pio depName=INA226 packageName=robtillaart/library/INA226
-	robtillaart/INA226@0.6.4
+	robtillaart/INA226@0.6.5
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
 	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
@@ -213,6 +213,6 @@ lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic-DFRobot_LarkWeatherStation packageName=https://github.com/meshtastic/DFRobot_LarkWeatherStation gitBranch=master
 	https://github.com/meshtastic/DFRobot_LarkWeatherStation/archive/4de3a9cadef0f6a5220a8a906cf9775b02b0040d.zip
 	# renovate: datasource=custom.pio depName=Sensirion Core packageName=sensirion/library/Sensirion Core
-	sensirion/Sensirion Core@0.7.1
+	sensirion/Sensirion Core@0.7.2
 	# renovate: datasource=custom.pio depName=Sensirion I2C SCD4x packageName=sensirion/library/Sensirion I2C SCD4x
 	sensirion/Sensirion I2C SCD4x@1.1.0

src/Power.cpp

@@ -194,7 +194,7 @@ static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level se
 
 #ifdef BATTERY_PIN
 
-static void adcEnable()
+void battery_adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -214,7 +214,7 @@ static void adcEnable()
 #endif
 }
 
-static void adcDisable()
+static void battery_adcDisable()
 {
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
@@ -278,6 +278,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 break;
             }
         }
+#if defined(BATTERY_CHARGING_INV)
+        // bit of trickery to show 99% up until the charge finishes
+        if (!digitalRead(BATTERY_CHARGING_INV) && battery_SOC > 99)
+            battery_SOC = 99;
+#endif
         return clamp((int)(battery_SOC), 0, 100);
     }
 
@@ -320,7 +325,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             uint32_t raw = 0;
             float scaled = 0;
 
-            adcEnable();
+            battery_adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
@@ -332,7 +337,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
 #endif
-            adcDisable();
+            battery_adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -455,6 +460,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
         // if it's not HIGH - check the battery
 #endif
+#elif defined(MUZI_BASE)
+        return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
 #endif
         return getBattVoltage() > chargingVolt;
     }
@@ -470,6 +477,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
+#elif defined(BATTERY_CHARGING_INV)
+        return !digitalRead(BATTERY_CHARGING_INV);
 #else
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
         if (hasINA()) {
@@ -698,11 +707,18 @@ bool Power::setup()
         []() {
             power->setIntervalFromNow(0);
             runASAP = true;
-            BaseType_t higherWake = 0;
         },
         CHANGE);
 #endif
-
+#ifdef BATTERY_CHARGING_INV
+    attachInterrupt(
+        BATTERY_CHARGING_INV,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+        },
+        CHANGE);
+#endif
     enabled = found;
     low_voltage_counter = 0;
 
@@ -759,6 +775,8 @@ void Power::shutdown()
     if (screen) {
 #ifdef T_DECK_PRO
         screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
+#elif defined(USE_EINK)
+        screen->showSimpleBanner("Shutting Down...", 2250); // dismiss after 3 seconds to avoid the banner on the sleep screen
 #else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
 #endif
@@ -906,13 +924,8 @@ void Power::readPowerStatus()
             low_voltage_counter++;
             LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
             if (low_voltage_counter > 10) {
-#ifdef ARCH_NRF52
-                // We can't trigger deep sleep on NRF52, it's freezing the board
-                LOG_DEBUG("Low voltage detected, but not trigger deep sleep");
-#else
                 LOG_INFO("Low voltage detected, trigger deep sleep");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
-#endif
             }
         } else {
             low_voltage_counter = 0;
@@ -1552,4 +1565,4 @@ bool Power::meshSolarInit()
 {
     return false;
 }
-#endif
+#endif

src/configuration.h

@@ -250,8 +250,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Touchscreen
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
-#define CST328_ADDR 0x1A
+#define CST328_ADDR 0x1A // same address as CST226SE
 #define CHSC6X_ADDR 0x2E
+#define CST226SE_ADDR_ALT 0x5A
 
 // -----------------------------------------------------------------------------
 // RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
@@ -396,6 +397,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define HAS_RGB_LED
 #endif
 
+#ifndef LED_STATE_OFF
+#define LED_STATE_OFF 0
+#endif
+#ifndef LED_STATE_ON
+#define LED_STATE_ON 1
+#endif
+
 // default mapping of pins
 #if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
 #define ALT_BUTTON_PIN PIN_BUTTON2

src/detect/ScanI2C.h

@@ -85,7 +85,8 @@ class ScanI2C
         DRV2605,
         BH1750,
         DA217,
-        CHSC6X
+        CHSC6X,
+        CST226SE
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -499,7 +499,18 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 SCAN_SIMPLE_CASE(DFROBOT_RAIN_ADDR, DFROBOT_RAIN, "DFRobot Rain Gauge", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(LTR390UV_ADDR, LTR390UV, "LTR390UV", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(PCT2075_ADDR, PCT2075, "PCT2075", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(CST328_ADDR, CST328, "CST328", (uint8_t)addr.address);
+            case CST328_ADDR:
+                // Do we have the CST328 or the CST226SE
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xAB), 1);
+                if (registerValue == 0xA9) {
+                    type = CST226SE;
+                    logFoundDevice("CST226SE", (uint8_t)addr.address);
+                } else {
+                    type = CST328;
+                    logFoundDevice("CST328", (uint8_t)addr.address);
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(CHSC6X_ADDR, CHSC6X, "CHSC6X", (uint8_t)addr.address);
             case LTR553ALS_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x86), 1); // Part ID register
@@ -528,8 +539,12 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
             case MLX90614_ADDR_DEF:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1);
-                if (registerValue == 0x5a) {
+                // Do we have the MLX90614 or the MPR121KB or the CST226SE
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x06), 1);
+                if (registerValue == 0xAB) {
+                    type = CST226SE;
+                    logFoundDevice("CST226SE", (uint8_t)addr.address);
+                } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1) == 0x5a) {
                     type = MLX90614;
                     logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
@@ -547,6 +562,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case ICM20948_ADDR:     // same as BMX160_ADDR
             case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
+#ifdef HAS_ICM20948
+                type = ICM20948;
+                logFoundDevice("ICM20948", (uint8_t)addr.address);
+                break;
+#endif
                 if (registerValue == 0xEA) {
                     type = ICM20948;
                     logFoundDevice("ICM20948", (uint8_t)addr.address);

src/gps/GPS.cpp

@@ -240,6 +240,9 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
             buffer[bytesRead] = b;
             bytesRead++;
             if ((bytesRead == 767) || (b == '\r')) {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(debugmsg.c_str());
+#endif
                 if (strnstr((char *)buffer, message, bytesRead) != nullptr) {
 #ifdef GPS_DEBUG
                     LOG_DEBUG("Found: %s", message); // Log the found message
@@ -247,9 +250,6 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
                     return GNSS_RESPONSE_OK;
                 } else {
                     bytesRead = 0;
-#ifdef GPS_DEBUG
-                    LOG_DEBUG(debugmsg.c_str());
-#endif
                 }
             }
         }
@@ -1275,6 +1275,24 @@ GnssModel_t GPS::probe(int serialSpeed)
         memset(&ublox_info, 0, sizeof(ublox_info));
         delay(100);
 
+#if defined(PIN_GPS_RESET) && PIN_GPS_RESET != -1
+        digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
+        delay(10);
+        digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
+
+        // attempt to detect the chip based on boot messages
+        std::vector<ChipInfo> passive_detect = {
+            {"AG3335", "$PAIR021,AG3335", GNSS_MODEL_AG3335},
+            {"AG3352", "$PAIR021,AG3352", GNSS_MODEL_AG3352},
+            {"RYS3520", "$PAIR021,REYAX_RYS3520_V2", GNSS_MODEL_AG3352},
+            {"UC6580", "UC6580", GNSS_MODEL_UC6580},
+            // as L76K is sort of a last ditch effort, we won't attempt to detect it by startup messages for now.
+            /*{"L76K", "SW=URANUS", GNSS_MODEL_MTK}*/};
+        GnssModel_t detectedDriver = getProbeResponse(500, passive_detect, serialSpeed);
+        if (detectedDriver != GNSS_MODEL_UNKNOWN) {
+            return detectedDriver;
+        }
+#endif
         // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
         _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
         delay(20);
@@ -1473,12 +1491,12 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
             }
 
             if (c == ',' || (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n')) {
-#ifdef GPS_DEBUG
-                LOG_DEBUG(response);
-#endif
                 // check if we can see our chips
                 for (const auto &chipInfo : responseMap) {
                     if (strstr(response, chipInfo.detectionString.c_str()) != nullptr) {
+#ifdef GPS_DEBUG
+                        LOG_DEBUG(response);
+#endif
                         LOG_INFO("%s detected", chipInfo.chipName.c_str());
                         delete[] response; // Cleanup before return
                         return chipInfo.driver;
@@ -1486,6 +1504,9 @@ GnssModel_t GPS::getProbeResponse(unsigned long timeout, const std::vector<ChipI
                 }
             }
             if (responseLen >= 2 && response[responseLen - 2] == '\r' && response[responseLen - 1] == '\n') {
+#ifdef GPS_DEBUG
+                LOG_DEBUG(response);
+#endif
                 // Reset the response buffer for the next potential message
                 responseLen = 0;
                 response[0] = '\0';
@@ -1572,8 +1593,6 @@ GPS *GPS::createGps()
 
 #ifdef PIN_GPS_RESET
     pinMode(PIN_GPS_RESET, OUTPUT);
-    digitalWrite(PIN_GPS_RESET, GPS_RESET_MODE); // assert for 10ms
-    delay(10);
     digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
 

src/gps/RTC.cpp

@@ -112,7 +112,11 @@ RTCSetResult readFromRTC()
 #elif defined(RX8130CE_RTC)
     if (rtc_found.address == RX8130CE_RTC) {
         uint32_t now = millis();
+#ifdef MUZI_BASE
+        ArtronShop_RX8130CE rtc(&Wire1);
+#else
         ArtronShop_RX8130CE rtc(&Wire);
+#endif
         tm t;
         if (rtc.getTime(&t)) {
             tv.tv_sec = gm_mktime(&t);
@@ -245,7 +249,11 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
         }
 #elif defined(RX8130CE_RTC)
         if (rtc_found.address == RX8130CE_RTC) {
+#ifdef MUZI_BASE
+            ArtronShop_RX8130CE rtc(&Wire1);
+#else
             ArtronShop_RX8130CE rtc(&Wire);
+#endif
             tm *t = gmtime(&tv->tv_sec);
             if (rtc.setTime(*t)) {
                 LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,
@@ -310,7 +318,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
 #ifdef BUILD_EPOCH
     if (tv.tv_sec < BUILD_EPOCH) {
         if (Throttle::isWithinTimespanMs(lastTimeValidationWarning, TIME_VALIDATION_WARNING_INTERVAL_MS) == false) {
-            LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
+            LOG_WARN("Ignore time (%lu) before build epoch (%lu)!", printableEpoch, BUILD_EPOCH);
             lastTimeValidationWarning = millis();
         }
         return RTCSetResultInvalidTime;
@@ -319,7 +327,7 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
             // Calculate max allowed time safely to avoid overflow in logging
             uint64_t maxAllowedTime = (uint64_t)BUILD_EPOCH + FORTY_YEARS;
             uint32_t maxAllowedPrintable = (maxAllowedTime > UINT32_MAX) ? UINT32_MAX : (uint32_t)maxAllowedTime;
-            LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch,
+            LOG_WARN("Ignore time (%lu) too far in the future (build epoch: %lu, max allowed: %lu)!", printableEpoch,
                      (uint32_t)BUILD_EPOCH, maxAllowedPrintable);
             lastTimeValidationWarning = millis();
         }

src/graphics/Screen.cpp

@@ -324,7 +324,7 @@ static int8_t prevFrame = -1;
 // Combined dynamic node list frame cycling through LastHeard, HopSignal, and Distance modes
 // Uses a single frame and changes data every few seconds (E-Ink variant is separate)
 
-#if defined(ESP_PLATFORM) && defined(USE_ST7789)
+#if defined(ESP_PLATFORM) && (defined(USE_ST7789) || defined(USE_ST7796))
 SPIClass SPI1(HSPI);
 #endif
 
@@ -356,7 +356,18 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #else
     dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
 #endif
+#elif defined(USE_ST7796)
+#ifdef ESP_PLATFORM
+    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT, ST7796_SDA,
+                            ST7796_MISO, ST7796_SCK, TFT_SPI_FREQUENCY);
+#else
+    dispdev = new ST7796Spi(&SPI1, ST7796_RESET, ST7796_RS, ST7796_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
+#endif
+#if defined(USE_ST7789)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
+#elif defined(USE_ST7796)
+    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
+#endif
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -435,6 +446,14 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
 
+#if defined(MUZI_BASE)
+            dispdev->init();
+            dispdev->setBrightness(brightness);
+            dispdev->flipScreenVertically();
+            dispdev->resetDisplay();
+            digitalWrite(SCREEN_12V_ENABLE, HIGH);
+            delay(100);
+#endif
 #if !ARCH_PORTDUINO
             dispdev->displayOn();
 #endif
@@ -466,6 +485,15 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             pinMode(VTFT_LEDA, OUTPUT);
             digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
 #endif
+#endif
+#ifdef USE_ST7796
+            ui->init();
+#ifdef ESP_PLATFORM
+            analogWrite(VTFT_LEDA, BRIGHTNESS_DEFAULT);
+#else
+            pinMode(VTFT_LEDA, OUTPUT);
+            digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
+#endif
 #endif
             enabled = true;
             setInterval(0); // Draw ASAP
@@ -484,6 +512,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOff();
+
+#ifdef SCREEN_12V_ENABLE
+            digitalWrite(SCREEN_12V_ENABLE, LOW);
+#endif
 #ifdef USE_ST7789
             SPI1.end();
 #if defined(ARCH_ESP32)
@@ -500,6 +532,21 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             nrf_gpio_cfg_default(ST7789_NSS);
 #endif
 #endif
+#ifdef USE_ST7796
+            SPI1.end();
+#if defined(ARCH_ESP32)
+            pinMode(VTFT_LEDA, OUTPUT);
+            digitalWrite(VTFT_LEDA, LOW);
+            pinMode(ST7796_RESET, ANALOG);
+            pinMode(ST7796_RS, ANALOG);
+            pinMode(ST7796_NSS, ANALOG);
+#else
+            nrf_gpio_cfg_default(VTFT_LEDA);
+            nrf_gpio_cfg_default(ST7796_RESET);
+            nrf_gpio_cfg_default(ST7796_RS);
+            nrf_gpio_cfg_default(ST7796_NSS);
+#endif
+#endif
 
 #ifdef T_WATCH_S3
             PMU->disablePowerOutput(XPOWERS_ALDO2);
@@ -534,7 +581,7 @@ void Screen::setup()
         static_cast<AutoOLEDWire *>(dispdev)->setDetected(model);
 #endif
 
-#ifdef USE_SH1107_128_64
+#if defined(USE_SH1107_128_64) || defined(USE_SH1107)
     static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
 #endif
 
@@ -542,6 +589,13 @@ void Screen::setup()
     // Apply custom RGB color (e.g. Heltec T114/T190)
     static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
 #endif
+#if defined(MUZI_BASE)
+    dispdev->delayPoweron = true;
+#endif
+#if defined(USE_ST7796) && defined(TFT_MESH)
+    // Custom text color, if defined in variant.h
+    static_cast<ST7796Spi *>(dispdev)->setRGB(TFT_MESH);
+#endif
 
     // === Initialize display and UI system ===
     ui->init();
@@ -605,6 +659,8 @@ void Screen::setup()
         static_cast<TFTDisplay *>(dispdev)->flipScreenVertically();
 #elif defined(USE_ST7789)
         static_cast<ST7789Spi *>(dispdev)->flipScreenVertically();
+#elif defined(USE_ST7796)
+        static_cast<ST7796Spi *>(dispdev)->mirrorScreen();
 #elif !defined(M5STACK_UNITC6L)
         dispdev->flipScreenVertically();
 #endif
@@ -637,7 +693,7 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
+#elif HAS_TOUCHSCREEN && !defined(USE_EINK) && !HAS_CST226SE
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();

src/graphics/Screen.h

@@ -83,6 +83,8 @@ class Screen
 #include <ST7789Spi.h>
 #elif defined(USE_SPISSD1306)
 #include <SSD1306Spi.h>
+#elif defined(USE_ST7796)
+#include <ST7796Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>
@@ -249,6 +251,8 @@ class Screen : public concurrency::OSThread
 
     bool isOverlayBannerShowing();
 
+    bool isScreenOn() { return screenOn; }
+
     // Stores the last 4 of our hardware ID, to make finding the device for pairing easier
     // FIXME: Needs refactoring and getMacAddr needs to be moved to a utility class
     char ourId[5];

src/graphics/ScreenFonts.h

@@ -73,7 +73,7 @@
 #endif
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_ST7796)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL FONT_MEDIUM_LOCAL // Height: 19

src/graphics/TFTDisplay.cpp

@@ -427,33 +427,35 @@ static LGFX *tft = nullptr;
 #include "lgfx/v1/Touch.hpp"
 namespace lgfx
 {
- inline namespace v1
- {
+inline namespace v1
+{
 class TOUCH_CHSC6X : public ITouch
 {
-public:
+  public:
     TOUCH_CHSC6X(void)
     {
-      _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
-      _cfg.x_min = 0;
-      _cfg.x_max = 240;
-      _cfg.y_min = 0;
-      _cfg.y_max = 320;
+        _cfg.i2c_addr = TOUCH_SLAVE_ADDRESS;
+        _cfg.x_min = 0;
+        _cfg.x_max = 240;
+        _cfg.y_min = 0;
+        _cfg.y_max = 320;
     };
 
-    bool init(void) override {
-        if(chsc6xTouch==nullptr) {
-            chsc6xTouch=new chsc6x(&Wire1,TOUCH_SDA_PIN,TOUCH_SCL_PIN,TOUCH_INT_PIN,TOUCH_RST_PIN);
+    bool init(void) override
+    {
+        if (chsc6xTouch == nullptr) {
+            chsc6xTouch = new chsc6x(&Wire1, TOUCH_SDA_PIN, TOUCH_SCL_PIN, TOUCH_INT_PIN, TOUCH_RST_PIN);
         }
         chsc6xTouch->chsc6x_init();
         return true;
     };
 
-    uint_fast8_t getTouchRaw(touch_point_t* tp, uint_fast8_t count) override {
-        uint16_t raw_x,raw_y;
-        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y)==0) {
-            tp[0].x = 320-1-raw_y;
-            tp[0].y = 240-1-raw_x ;
+    uint_fast8_t getTouchRaw(touch_point_t *tp, uint_fast8_t count) override
+    {
+        uint16_t raw_x, raw_y;
+        if (chsc6xTouch->chsc6x_read_touch_info(&raw_x, &raw_y) == 0) {
+            tp[0].x = 320 - 1 - raw_y;
+            tp[0].y = 240 - 1 - raw_x;
             tp[0].size = 1;
             tp[0].id = 1;
             return 1;
@@ -462,13 +464,14 @@ public:
         return 0;
     };
 
-    void wakeup(void) override {};
-    void sleep(void) override {};
+    void wakeup(void) override{};
+    void sleep(void) override{};
+
   private:
-    chsc6x *chsc6xTouch=nullptr;
-  };
-}
-}
+    chsc6x *chsc6xTouch = nullptr;
+};
+} // namespace v1
+} // namespace lgfx
 #endif
 class LGFX : public lgfx::LGFX_Device
 {
@@ -513,9 +516,9 @@ class LGFX : public lgfx::LGFX_Device
         {                                        // Set the display panel control.
             auto cfg = _panel_instance.config(); // Gets a structure for display panel settings.
 
-            cfg.pin_cs = ST7789_CS; // Pin number where CS is connected (-1 = disable)
-            cfg.pin_rst = ST7789_RESET;       // Pin number where RST is connected  (-1 = disable)
-            cfg.pin_busy = ST7789_BUSY;      // Pin number where BUSY is connected (-1 = disable)
+            cfg.pin_cs = ST7789_CS;     // Pin number where CS is connected (-1 = disable)
+            cfg.pin_rst = ST7789_RESET; // Pin number where RST is connected  (-1 = disable)
+            cfg.pin_busy = ST7789_BUSY; // Pin number where BUSY is connected (-1 = disable)
 
             // The following setting values ​​are general initial values ​​for each panel, so please comment out any
             // unknown items and try them.

src/graphics/TimeFormatters.cpp

@@ -101,3 +101,23 @@ void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength)
     else
         snprintf(timeStr, maxLength, "unknown age");
 }
+
+void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs)
+{
+    uint32_t days = uptimeMillis / 86400000;
+    uint32_t hours = (uptimeMillis % 86400000) / 3600000;
+    uint32_t mins = (uptimeMillis % 3600000) / 60000;
+    uint32_t secs = (uptimeMillis % 60000) / 1000;
+
+    if (days) {
+        snprintf(uptimeStr, maxLength, "%s: %ud %uh", prefix, days, hours);
+    } else if (hours) {
+        snprintf(uptimeStr, maxLength, "%s: %uh %um", prefix, hours, mins);
+    } else if (!includeSecs) {
+        snprintf(uptimeStr, maxLength, "%s: %um", prefix, mins);
+    } else if (mins) {
+        snprintf(uptimeStr, maxLength, "%s: %um %us", prefix, mins, secs);
+    } else {
+        snprintf(uptimeStr, maxLength, "%s: %us", prefix, secs);
+    }
+}

src/graphics/TimeFormatters.h

@@ -24,3 +24,10 @@ bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int
  * @param maxLength Maximum length of the resulting string buffer
  */
 void getTimeAgoStr(uint32_t agoSecs, char *timeStr, uint8_t maxLength);
+
+/**
+ * Get a compact human-readable string that only shows the largest non-zero time components.
+ * For example, 0 days 1 hour 2 minutes will display as "1h 2m" but 1 day 2 hours 3 minutes
+ * will display as "1d 2h".
+ */
+void getUptimeStr(uint32_t uptimeMillis, const char *prefix, char *uptimeStr, uint8_t maxLength, bool includeSecs = false);

src/graphics/VirtualKeyboard.cpp

@@ -506,6 +506,9 @@ void VirtualKeyboard::drawKey(OLEDDisplay *display, const VirtualKey &key, bool
             centeredTextY -= 1;
         }
     }
+#ifdef MUZI_BASE // Correct issue with character vertical position on MUZI_BASE
+    centeredTextY -= 2;
+#endif
     display->drawString(textX, centeredTextY, keyText.c_str());
 }
 

src/graphics/draw/ClockRenderer.cpp

@@ -194,17 +194,12 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     graphics::drawCommonHeader(display, x, y, titleStr, true, true);
     int line = 0;
 
-#ifdef T_WATCH_S3
-    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
-        graphics::ClockRenderer::drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
-    }
-#endif
-
     uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
     char timeString[16];
     int hour = 0;
     int minute = 0;
     int second = 0;
+
     if (rtc_sec > 0) {
         long hms = rtc_sec % SEC_PER_DAY;
         hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
@@ -215,11 +210,11 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     bool isPM = hour >= 12;
-    // hour = hour > 12 ? hour - 12 : hour;
     if (config.display.use_12h_clock) {
         hour %= 12;
-        if (hour == 0)
+        if (hour == 0) {
             hour = 12;
+        }
         snprintf(timeString, sizeof(timeString), "%d:%02d", hour, minute);
     } else {
         snprintf(timeString, sizeof(timeString), "%02d:%02d", hour, minute);
@@ -229,24 +224,56 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     char secondString[8];
     snprintf(secondString, sizeof(secondString), "%02d", second);
 
-#ifdef T_WATCH_S3
-    float scale = 1.5;
-#elif defined(CHATTER_2)
-    float scale = 1.1;
-#else
-    float scale = 0.75;
-    if (isHighResolution) {
-        scale = 1.5;
-    }
-#endif
+    static bool scaleInitialized = false;
+    static float scale = 0.75f;
+    static float segmentWidth = SEGMENT_WIDTH * 0.75f;
+    static float segmentHeight = SEGMENT_HEIGHT * 0.75f;
 
-    uint16_t segmentWidth = SEGMENT_WIDTH * scale;
-    uint16_t segmentHeight = SEGMENT_HEIGHT * scale;
+    if (!scaleInitialized) {
+        float screenwidth_target_ratio = 0.80f; // Target 80% of display width (adjustable)
+        float max_scale = 3.5f;                 // Safety limit to avoid runaway scaling
+        float step = 0.05f;                     // Step increment per iteration
+
+        float target_width = display->getWidth() * screenwidth_target_ratio;
+        float target_height =
+            display->getHeight() -
+            (isHighResolution
+                 ? 46
+                 : 33); // Be careful adjusting this number, we have to account for header and the text under the time
+
+        float calculated_width_size = 0.0f;
+        float calculated_height_size = 0.0f;
+
+        while (true) {
+            segmentWidth = SEGMENT_WIDTH * scale;
+            segmentHeight = SEGMENT_HEIGHT * scale;
+
+            calculated_width_size = segmentHeight + ((segmentWidth + (segmentHeight * 2) + 4) * 4);
+            calculated_height_size = segmentHeight + ((segmentHeight + (segmentHeight * 2) + 4) * 2);
+
+            if (calculated_width_size >= target_width || calculated_height_size >= target_height || scale >= max_scale) {
+                break;
+            }
+
+            scale += step;
+        }
+
+        // If we overshot width, back off one step and recompute segment sizes
+        if (calculated_width_size > target_width || calculated_height_size > target_height) {
+            scale -= step;
+            segmentWidth = SEGMENT_WIDTH * scale;
+            segmentHeight = SEGMENT_HEIGHT * scale;
+        }
+
+        scaleInitialized = true;
+    }
+
+    size_t len = strlen(timeString);
 
     // calculate hours:minutes string width
-    uint16_t timeStringWidth = strlen(timeString) * 5;
+    uint16_t timeStringWidth = len * 5; // base spacing between characters
 
-    for (uint8_t i = 0; i < strlen(timeString); i++) {
+    for (size_t i = 0; i < len; i++) {
         char character = timeString[i];
 
         if (character == ':') {
@@ -257,19 +284,21 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
     }
 
     uint16_t hourMinuteTextX = (display->getWidth() / 2) - (timeStringWidth / 2);
-
     uint16_t startingHourMinuteTextX = hourMinuteTextX;
 
-    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2);
+    uint16_t hourMinuteTextY = (display->getHeight() / 2) - (((segmentWidth * 2) + (segmentHeight * 3) + 8) / 2) + 2;
 
     // iterate over characters in hours:minutes string and draw segmented characters
-    for (uint8_t i = 0; i < strlen(timeString); i++) {
+    for (size_t i = 0; i < len; i++) {
         char character = timeString[i];
 
         if (character == ':') {
             drawSegmentedDisplayColon(display, hourMinuteTextX, hourMinuteTextY, scale);
 
             hourMinuteTextX += segmentHeight + 6;
+            if (scale >= 2.0f) {
+                hourMinuteTextX += (uint16_t)(4.5f * scale);
+            }
         } else {
             drawSegmentedDisplayCharacter(display, hourMinuteTextX, hourMinuteTextY, character - '0', scale);
 
@@ -279,38 +308,29 @@ void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int1
         hourMinuteTextX += 5;
     }
 
-    // draw seconds string
+    // draw seconds string + AM/PM
     display->setFont(FONT_SMALL);
     int xOffset = (isHighResolution) ? 0 : -1;
     if (hour >= 10) {
         xOffset += (isHighResolution) ? 32 : 18;
     }
-    int yOffset = (isHighResolution) ? 3 : 1;
-#ifdef SENSECAP_INDICATOR
-    yOffset -= 3;
-#endif
-#ifdef T_DECK
-    yOffset -= 5;
-#endif
+
     if (config.display.use_12h_clock) {
-        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - yOffset - 2,
-                            isPM ? "pm" : "am");
+        display->drawString(startingHourMinuteTextX + xOffset, (display->getHeight() - hourMinuteTextY) - 1, isPM ? "pm" : "am");
     }
 
 #ifndef USE_EINK
     xOffset = (isHighResolution) ? 18 : 10;
-    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - yOffset,
+    if (scale >= 2.0f) {
+        xOffset -= (int)(4.5f * scale);
+    }
+    display->drawString(startingHourMinuteTextX + timeStringWidth - xOffset, (display->getHeight() - hourMinuteTextY) - 1,
                         secondString);
 #endif
 
     graphics::drawCommonFooter(display, x, y);
 }
 
-void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y)
-{
-    display->drawFastImage(x, y, 18, 14, bluetoothConnectedIcon);
-}
-
 // Draw an analog clock
 void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -321,11 +341,6 @@ void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
     graphics::drawCommonHeader(display, x, y, titleStr, true, true);
     int line = 0;
 
-#ifdef T_WATCH_S3
-    if (nimbleBluetooth && nimbleBluetooth->isConnected()) {
-        drawBluetoothConnectedIcon(display, display->getWidth() - 18, display->getHeight() - 14);
-    }
-#endif
     // clock face center coordinates
     int16_t centerX = display->getWidth() / 2;
     int16_t centerY = display->getHeight() / 2;

src/graphics/draw/ClockRenderer.h

@@ -24,7 +24,6 @@ void drawVerticalSegment(OLEDDisplay *display, int x, int y, int width, int heig
 
 // UI elements for clock displays
 // void drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode = true, float scale = 1);
-void drawBluetoothConnectedIcon(OLEDDisplay *display, int16_t x, int16_t y);
 
 } // namespace ClockRenderer
 

src/graphics/draw/DebugRenderer.cpp

@@ -11,6 +11,7 @@
 #include "gps/RTC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "mesh/Channels.h"
@@ -96,7 +97,8 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
                                           (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(USE_ST7796) ||            \
+     ARCH_PORTDUINO) &&                                                                                                                                                                                                    \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
                                    8, imgQuestionL1);
@@ -108,7 +110,7 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
 #endif
         } else {
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || defined(USE_ST7796)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
                                    8, imgSFL1);
@@ -124,7 +126,8 @@ void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16
         // TODO: Raspberry Pi supports more than just the one screen size
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
      defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(USE_ST7796) ||            \
+     ARCH_PORTDUINO) &&                                                                                                                                                                                                    \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -650,17 +653,7 @@ void drawSystemScreen(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x
 
     if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line <= 5)) { // Only show uptime if the screen can show it
         char uptimeStr[32] = "";
-        uint32_t uptime = millis() / 1000;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
+        getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
         textWidth = display->getStringWidth(uptimeStr);
         nameX = (SCREEN_WIDTH - textWidth) / 2;
         display->drawString(nameX, getTextPositions(display)[line++], uptimeStr);
@@ -729,4 +722,4 @@ void drawChirpy(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int1
 
 } // namespace DebugRenderer
 } // namespace graphics
-#endif
+#endif

src/graphics/draw/MenuHandler.cpp

@@ -119,6 +119,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             auto changes = SEGMENT_CONFIG;
 
             // This is needed as we wait til picking the LoRa region to generate keys for the first time.
+#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
             if (!owner.is_licensed) {
                 bool keygenSuccess = false;
                 if (config.security.private_key.size == 32) {
@@ -139,6 +140,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                     memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
                 }
             }
+#endif
             config.lora.tx_enabled = true;
             initRegion();
             if (myRegion->dutyCycle < 100) {
@@ -581,11 +583,8 @@ void menuHandler::systemBaseMenu()
 
     optionsArray[options] = "Notifications";
     optionsEnumArray[options++] = Notifications;
-#if defined(ST7789_CS) || defined(ST7796_CS) || defined(USE_OLED) || defined(USE_SSD1306) || defined(USE_SH1106) ||              \
-    defined(USE_SH1107) || defined(HELTEC_MESH_NODE_T114) || defined(HELTEC_VISION_MASTER_T190) || HAS_TFT
     optionsArray[options] = "Display Options";
     optionsEnumArray[options++] = ScreenOptions;
-#endif
 
 #if defined(M5STACK_UNITC6L)
     optionsArray[options] = "Bluetooth";
@@ -785,17 +784,24 @@ void menuHandler::nodeNameLengthMenu()
 
 void menuHandler::resetNodeDBMenu()
 {
-    static const char *optionsArray[] = {"Back", "Confirm"};
+    static const char *optionsArray[] = {"Back", "Reset All", "Preserve Favorites"};
     BannerOverlayOptions bannerOptions;
     bannerOptions.message = "Confirm Reset NodeDB";
     bannerOptions.optionsArrayPtr = optionsArray;
-    bannerOptions.optionsCount = 2;
+    bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1) {
+        if (selected == 1 || selected == 2) {
             disableBluetooth();
+            screen->setFrames(Screen::FOCUS_DEFAULT);
+        }
+        if (selected == 1) {
             LOG_INFO("Initiate node-db reset");
             nodeDB->resetNodes();
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
+        } else if (selected == 2) {
+            LOG_INFO("Initiate node-db reset but keeping favorites");
+            nodeDB->resetNodes(1);
+            rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };
     screen->showOverlayBanner(bannerOptions);
@@ -931,7 +937,9 @@ void menuHandler::BluetoothToggleMenu()
     bannerOptions.optionsArrayPtr = optionsArray;
     bannerOptions.optionsCount = 3;
     bannerOptions.bannerCallback = [](int selected) -> void {
-        if (selected == 1 || selected == 2) {
+        if (selected == 0)
+            return;
+        else if (selected != (config.bluetooth.enabled ? 1 : 2)) {
             InputEvent event = {.inputEvent = (input_broker_event)170, .kbchar = 170, .touchX = 0, .touchY = 0};
             inputBroker->injectInputEvent(&event);
         }
@@ -1347,7 +1355,7 @@ void menuHandler::screenOptionsMenu()
     optionsEnumArray[options++] = ScreenColor;
 #endif
 
-    optionsArray[options] = "Frame Visiblity Toggle";
+    optionsArray[options] = "Frame Visibility Toggle";
     optionsEnumArray[options++] = FrameToggles;
 
     optionsArray[options] = "Display Units";
@@ -1744,4 +1752,4 @@ void menuHandler::saveUIConfig()
 
 } // namespace graphics
 
-#endif
+#endif

src/graphics/draw/UIRenderer.cpp

@@ -11,6 +11,7 @@
 #include "graphics/Screen.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/SharedUIDisplay.h"
+#include "graphics/TimeFormatters.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "target_specific.h"
@@ -256,7 +257,7 @@ void UIRenderer::drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const mes
     }
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS)) &&            \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || defined(ST7796_CS) || defined(USE_ST7796)) &&            \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 
     if (isHighResolution) {
@@ -383,17 +384,7 @@ void UIRenderer::drawNodeInfo(OLEDDisplay *display, const OLEDDisplayUiState *st
     // === 4. Uptime (only show if metric is present) ===
     char uptimeStr[32] = "";
     if (node->has_device_metrics && node->device_metrics.has_uptime_seconds) {
-        uint32_t uptime = node->device_metrics.uptime_seconds;
-        uint32_t days = uptime / 86400;
-        uint32_t hours = (uptime % 86400) / 3600;
-        uint32_t mins = (uptime % 3600) / 60;
-        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
-        if (days)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %ud %uh", days, hours);
-        else if (hours)
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %uh %um", hours, mins);
-        else
-            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
+        getUptimeStr(node->device_metrics.uptime_seconds * 1000, " Up", uptimeStr, sizeof(uptimeStr));
     }
     if (uptimeStr[0] && line < 5) {
         display->drawString(x, getTextPositions(display)[line++], uptimeStr);
@@ -592,18 +583,8 @@ void UIRenderer::drawDeviceFocused(OLEDDisplay *display, OLEDDisplayUiState *sta
     drawNodes(display, x + 1, getTextPositions(display)[line] + 2, nodeStatus, -1, false, "online");
 #endif
     char uptimeStr[32] = "";
-    uint32_t uptime = millis() / 1000;
-    uint32_t days = uptime / 86400;
-    uint32_t hours = (uptime % 86400) / 3600;
-    uint32_t mins = (uptime % 3600) / 60;
-    // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
 #if !defined(M5STACK_UNITC6L)
-    if (days)
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %ud %uh", days, hours);
-    else if (hours)
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %uh %um", hours, mins);
-    else
-        snprintf(uptimeStr, sizeof(uptimeStr), "Up: %um", mins);
+    getUptimeStr(millis(), "Up", uptimeStr, sizeof(uptimeStr));
 #endif
     display->drawString(SCREEN_WIDTH - display->getStringWidth(uptimeStr), getTextPositions(display)[line++], uptimeStr);
 
@@ -1048,36 +1029,17 @@ void UIRenderer::drawCompassAndLocationScreen(OLEDDisplay *display, OLEDDisplayU
     if (strcmp(displayLine, "GPS off") != 0 && strcmp(displayLine, "No GPS") != 0) {
         // === Second Row: Last GPS Fix ===
         if (gpsStatus->getLastFixMillis() > 0) {
-            uint32_t delta = (millis() - gpsStatus->getLastFixMillis()) / 1000; // seconds since last fix
-            uint32_t days = delta / 86400;
-            uint32_t hours = (delta % 86400) / 3600;
-            uint32_t mins = (delta % 3600) / 60;
-            uint32_t secs = delta % 60;
-
-            char buf[32];
+            uint32_t delta = millis() - gpsStatus->getLastFixMillis();
+            char uptimeStr[32];
 #if defined(USE_EINK)
             // E-Ink: skip seconds, show only days/hours/mins
-            if (days > 0) {
-                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
-            } else if (hours > 0) {
-                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
-            } else {
-                snprintf(buf, sizeof(buf), "Last: %um", mins);
-            }
+            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), false);
 #else
             // Non E-Ink: include seconds where useful
-            if (days > 0) {
-                snprintf(buf, sizeof(buf), "Last: %ud %uh", days, hours);
-            } else if (hours > 0) {
-                snprintf(buf, sizeof(buf), "Last: %uh %um", hours, mins);
-            } else if (mins > 0) {
-                snprintf(buf, sizeof(buf), "Last: %um %us", mins, secs);
-            } else {
-                snprintf(buf, sizeof(buf), "Last: %us", secs);
-            }
+            getUptimeStr(delta, "Last", uptimeStr, sizeof(uptimeStr), true);
 #endif
 
-            display->drawString(0, getTextPositions(display)[line++], buf);
+            display->drawString(0, getTextPositions(display)[line++], uptimeStr);
         } else {
             display->drawString(0, getTextPositions(display)[line++], "Last: ?");
         }
@@ -1422,4 +1384,4 @@ std::string UIRenderer::drawTimeDelta(uint32_t days, uint32_t hours, uint32_t mi
 
 } // namespace graphics
 
-#endif // HAS_SCREEN
+#endif // HAS_SCREEN

src/graphics/images.h

@@ -27,8 +27,7 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
                                                     0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
 
 #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
-     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(ST7796_CS) ||             \
-     ARCH_PORTDUINO) &&                                                                                                          \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS) || defined(ILI9488_CS) || defined(USE_ST7796) || defined(ST7796_CS) || ARCH_PORTDUINO) &&                \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

src/graphics/niche/README.md

@@ -5,7 +5,6 @@ A pattern / collection of resources for creating custom UIs, to target small gro
 For an example, see the `heltec-vision-master-e290-inkhud` platformio env.
 
 - platformio.ini
-
   - suppress default Meshtastic components (Screen, ButtonThread, etc)
   - define `MESHTASTIC_INCLUDE_NICHE_GRAPHICS`
   - (possibly) Edit `build_src_filter` to include our new nicheGraphics.h file

src/input/InputBroker.cpp

@@ -52,7 +52,7 @@ int InputBroker::handleInputEvent(const InputEvent *event)
     powerFSM.trigger(EVENT_INPUT); // todo: not every input should wake, like long hold release
 
     if (event && event->inputEvent != INPUT_BROKER_NONE && externalNotificationModule &&
-        moduleConfig.external_notification.enabled) {
+        moduleConfig.external_notification.enabled && externalNotificationModule->nagging()) {
         externalNotificationModule->stopNow();
     }
 

src/main.cpp

@@ -477,6 +477,10 @@ void setup()
 #ifdef RESET_OLED
     pinMode(RESET_OLED, OUTPUT);
     digitalWrite(RESET_OLED, 1);
+    delay(2);
+    digitalWrite(RESET_OLED, 0);
+    delay(10);
+    digitalWrite(RESET_OLED, 1);
 #endif
 
 #ifdef SENSOR_POWER_CTRL_PIN
@@ -873,7 +877,7 @@ void setup()
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
 
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
-    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
+    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_ST7796) ||              \
     defined(USE_SPISSD1306)
         screen = new graphics::Screen(screen_found, screen_model, screen_geometry);
 #elif defined(ARCH_PORTDUINO)
@@ -959,6 +963,7 @@ void setup()
     i2cScanner.reset();
 #endif
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
     // warn the user about a low entropy key
     if (nodeDB->keyIsLowEntropy && !nodeDB->hasWarned) {
         LOG_WARN(LOW_ENTROPY_WARNING);
@@ -969,6 +974,7 @@ void setup()
         service->sendClientNotification(cn);
         nodeDB->hasWarned = true;
     }
+#endif
 
 // buttons are now inputBroker, so have to come after setupModules
 #if HAS_BUTTON
@@ -1148,7 +1154,7 @@ void setup()
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)
 #if defined(ST7701_CS) || defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) ||       \
-    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) ||              \
+    defined(ST7789_CS) || defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_ST7796) ||              \
     defined(USE_SPISSD1306)
     if (screen)
         screen->setup();

src/mesh/LR11x0Interface.cpp

@@ -244,6 +244,8 @@ template <typename T> void LR11x0Interface<T>::startReceive()
     // We use a 16 bit preamble so this should save some power by letting radio sit in standby mostly.
     int err =
         lora.startReceive(RADIOLIB_LR11X0_RX_TIMEOUT_INF, MESHTASTIC_RADIOLIB_IRQ_RX_FLAGS, RADIOLIB_IRQ_RX_DEFAULT_MASK, 0);
+    if (err)
+        LOG_ERROR("StartReceive error: %d", err);
     assert(err == RADIOLIB_ERR_NONE);
 
     RadioLibInterface::startReceive();
@@ -304,4 +306,4 @@ template <typename T> bool LR11x0Interface<T>::sleep()
 
     return true;
 }
-#endif
+#endif

src/mesh/NodeDB.cpp

@@ -653,7 +653,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     strncpy(config.network.ntp_server, "meshtastic.pool.ntp.org", 32);
 
 #if (defined(T_DECK) || defined(T_WATCH_S3) || defined(UNPHONE) || defined(PICOMPUTER_S3) || defined(SENSECAP_INDICATOR) ||      \
-     defined(ELECROW_PANEL)||defined(HELTEC_V4_TFT)) &&                                                                                                  \
+     defined(ELECROW_PANEL) || defined(HELTEC_V4_TFT)) &&                                                                        \
     HAS_TFT
     // switch BT off by default; use TFT programming mode or hotkey to enable
     config.bluetooth.enabled = false;
@@ -664,7 +664,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.bluetooth.fixed_pin = defaultBLEPin;
 
 #if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||       \
-    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306)
+    defined(HX8357_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(ST7796_CS) || defined(USE_SPISSD1306) || defined(USE_ST7796)
     bool hasScreen = true;
 #ifdef HELTEC_MESH_NODE_T114
     uint32_t st7789_id = get_st7789_id(ST7789_NSS, ST7789_SCK, ST7789_SDA, ST7789_RS, ST7789_RESET);
@@ -734,6 +734,9 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
     config.display.screen_on_secs = 30;
     config.display.wake_on_tap_or_motion = true;
 #endif
+#ifdef COMPASS_ORIENTATION
+    config.display.compass_orientation = COMPASS_ORIENTATION;
+#endif
 #if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
     if (WiFiOTA::isUpdated()) {
         WiFiOTA::recoverConfig(&config.network);
@@ -2008,6 +2011,7 @@ UserLicenseStatus NodeDB::getLicenseStatus(uint32_t nodeNum)
     return info->user.is_licensed ? UserLicenseStatus::Licensed : UserLicenseStatus::NotLicensed;
 }
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
 bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest)
 {
     if (keyToTest.size == 32) {
@@ -2022,6 +2026,7 @@ bool NodeDB::checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_pub
     }
     return false;
 }
+#endif
 
 bool NodeDB::backupPreferences(meshtastic_AdminMessage_BackupLocation location)
 {

src/mesh/NodeDB.h

@@ -283,7 +283,9 @@ class NodeDB
 
     bool hasValidPosition(const meshtastic_NodeInfoLite *n);
 
+#if !defined(MESHTASTIC_EXCLUDE_PKI)
     bool checkLowEntropyPublicKey(const meshtastic_Config_SecurityConfig_public_key_t &keyToTest);
+#endif
 
     bool backupPreferences(meshtastic_AdminMessage_BackupLocation location);
     bool restorePreferences(meshtastic_AdminMessage_BackupLocation location,
@@ -373,4 +375,4 @@ extern uint32_t error_address;
      ModuleConfig_RangeTestConfig_size + ModuleConfig_SerialConfig_size + ModuleConfig_StoreForwardConfig_size +                 \
      ModuleConfig_TelemetryConfig_size + ModuleConfig_size)
 
-// Please do not remove this comment, it makes trunk and compiler happy at the same time.
+// Please do not remove this comment, it makes trunk and compiler happy at the same time.

src/mesh/generated/meshtastic/mesh.pb.h

@@ -288,6 +288,12 @@ typedef enum _meshtastic_HardwareModel {
     meshtastic_HardwareModel_WISMESH_TAP_V2 = 116,
     /* RAK3401 */
     meshtastic_HardwareModel_RAK3401 = 117,
+    /* RAK6421 Hat+ */
+    meshtastic_HardwareModel_RAK6421 = 118,
+    /* Elecrow ThinkNode M4 */
+    meshtastic_HardwareModel_THINKNODE_M4 = 119,
+    /* Elecrow ThinkNode M6 */
+    meshtastic_HardwareModel_THINKNODE_M6 = 120,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -825,7 +831,11 @@ typedef struct _meshtastic_MeshPacket {
  Note: Our crypto implementation uses this field as well.
  See [crypto](/docs/overview/encryption) for details. */
     uint32_t from;
-    /* The (immediate) destination for this packet */
+    /* The (immediate) destination for this packet
+ If the value is 4,294,967,295 (maximum value of an unsigned 32bit integer), this indicates that the packet was
+ not destined for a specific node, but for a channel as indicated by the value of `channel` below.
+ If the value is another, this indicates that the packet was destined for a specific
+ node (i.e. a kind of "Direct Message" to this node) and not broadcast on a channel. */
     uint32_t to;
     /* (Usually) If set, this indicates the index in the secondary_channels table that this packet was sent/received on.
  If unset, packet was on the primary channel.

src/modules/AdminModule.cpp

@@ -773,6 +773,7 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
         config.lora = validatedLora;
         // If we're setting region for the first time, init the region and regenerate the keys
         if (isRegionUnset && config.lora.region > meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
+#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
             if (!owner.is_licensed) {
                 bool keygenSuccess = false;
                 if (config.security.private_key.size == 32) {
@@ -791,6 +792,7 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
                     memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32);
                 }
             }
+#endif
             config.lora.tx_enabled = true;
             initRegion();
             if (myRegion->dutyCycle < 100) {

src/modules/CannedMessageModule.cpp

@@ -836,6 +836,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_BACK && this->freetext.length() > 0) {
         payload = 0x08;
         lastTouchMillis = millis();
+        requestFocus();
         runOnce();
         return true;
     }
@@ -844,6 +845,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_LEFT) {
         payload = INPUT_BROKER_LEFT;
         lastTouchMillis = millis();
+        requestFocus();
         runOnce();
         return true;
     }
@@ -851,6 +853,7 @@ bool CannedMessageModule::handleFreeTextInput(const InputEvent *event)
     if (event->inputEvent == INPUT_BROKER_RIGHT) {
         payload = INPUT_BROKER_RIGHT;
         lastTouchMillis = millis();
+        requestFocus();
         runOnce();
         return true;
     }

src/modules/ExternalNotificationModule.cpp

@@ -314,11 +314,10 @@ void ExternalNotificationModule::stopNow()
         audioThread->stop();
 #endif
     // Turn off all outputs
-    LOG_INFO("Turning off setExternalStates: ");
+    LOG_INFO("Turning off setExternalStates");
     for (int i = 0; i < 3; i++) {
         setExternalState(i, false);
         externalTurnedOn[i] = 0;
-        LOG_INFO("%d ", i);
     }
     setIntervalFromNow(0);
 #ifdef T_WATCH_S3

src/modules/Modules.cpp

@@ -13,6 +13,8 @@
 #include "input/TrackballInterruptImpl1.h"
 #endif
 
+#include "modules/StatusLEDModule.h"
+
 #if !MESHTASTIC_EXCLUDE_I2C
 #include "input/cardKbI2cImpl.h"
 #endif
@@ -119,6 +121,10 @@ void setupModules()
         buzzerFeedbackThread = new BuzzerFeedbackThread();
     }
 #endif
+#if defined(LED_CHARGE) || defined(LED_PAIRING)
+    statusLEDModule = new StatusLEDModule();
+#endif
+
 #if !MESHTASTIC_EXCLUDE_ADMIN
     adminModule = new AdminModule();
 #endif
@@ -175,12 +181,13 @@ void setupModules()
     // new ReplyModule();
 #if (HAS_BUTTON || ARCH_PORTDUINO) && !MESHTASTIC_EXCLUDE_INPUTBROKER
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
+#ifndef T_LORA_PAGER
         rotaryEncoderInterruptImpl1 = new RotaryEncoderInterruptImpl1();
         if (!rotaryEncoderInterruptImpl1->init()) {
             delete rotaryEncoderInterruptImpl1;
             rotaryEncoderInterruptImpl1 = nullptr;
         }
-#ifdef T_LORA_PAGER
+#elif defined(T_LORA_PAGER)
         // use a special FSM based rotary encoder version for T-LoRa Pager
         rotaryEncoderImpl = new RotaryEncoderImpl();
         if (!rotaryEncoderImpl->init()) {

src/modules/NeighborInfoModule.cpp

@@ -34,7 +34,8 @@ void NeighborInfoModule::printNodeDBNeighbors()
     }
 }
 
-/* Send our initial owner announcement 35 seconds after we start (to give network time to setup) */
+/* Send our initial owner announcement 35 seconds after we start (to give
+ * network time to setup) */
 NeighborInfoModule::NeighborInfoModule()
     : ProtobufModule("neighborinfo", meshtastic_PortNum_NEIGHBORINFO_APP, &meshtastic_NeighborInfo_msg),
       concurrency::OSThread("NeighborInfo")
@@ -53,8 +54,8 @@ NeighborInfoModule::NeighborInfoModule()
 }
 
 /*
-Collect neighbor info from the nodeDB's history, capping at a maximum number of entries and max time
-Assumes that the neighborInfo packet has been allocated
+Collect neighbor info from the nodeDB's history, capping at a maximum number of
+entries and max time Assumes that the neighborInfo packet has been allocated
 @returns the number of entries collected
 */
 uint32_t NeighborInfoModule::collectNeighborInfo(meshtastic_NeighborInfo *neighborInfo)
@@ -71,8 +72,8 @@ uint32_t NeighborInfoModule::collectNeighborInfo(meshtastic_NeighborInfo *neighb
         if ((neighborInfo->neighbors_count < MAX_NUM_NEIGHBORS) && (nbr.node_id != my_node_id)) {
             neighborInfo->neighbors[neighborInfo->neighbors_count].node_id = nbr.node_id;
             neighborInfo->neighbors[neighborInfo->neighbors_count].snr = nbr.snr;
-            // Note: we don't set the last_rx_time and node_broadcast_intervals_secs here, because we don't want to send this over
-            // the mesh
+            // Note: we don't set the last_rx_time and node_broadcast_intervals_secs
+            // here, because we don't want to send this over the mesh
             neighborInfo->neighbors_count++;
         }
     }
@@ -88,8 +89,9 @@ void NeighborInfoModule::cleanUpNeighbors()
     uint32_t now = getTime();
     NodeNum my_node_id = nodeDB->getNodeNum();
     for (auto it = neighbors.rbegin(); it != neighbors.rend();) {
-        // We will remove a neighbor if we haven't heard from them in twice the broadcast interval
-        // cannot use isWithinTimespanMs() as it->last_rx_time is seconds since 1970
+        // We will remove a neighbor if we haven't heard from them in twice the
+        // broadcast interval cannot use isWithinTimespanMs() as it->last_rx_time is
+        // seconds since 1970
         if ((now - it->last_rx_time > it->node_broadcast_interval_secs * 2) && (it->node_id != my_node_id)) {
             LOG_DEBUG("Remove neighbor with node ID 0x%x", it->node_id);
             it = std::vector<meshtastic_Neighbor>::reverse_iterator(
@@ -132,25 +134,55 @@ int32_t NeighborInfoModule::runOnce()
     return Default::getConfiguredOrDefaultMs(moduleConfig.neighbor_info.update_interval, default_neighbor_info_broadcast_secs);
 }
 
+meshtastic_MeshPacket *NeighborInfoModule::allocReply()
+{
+    LOG_INFO("NeighborInfoRequested.");
+    if (lastSentReply && Throttle::isWithinTimespanMs(lastSentReply, 3 * 60 * 1000)) {
+        LOG_DEBUG("Skip Neighbors reply since we sent a reply <3min ago");
+        ignoreRequest = true; // Mark it as ignored for MeshModule
+        return nullptr;
+    }
+
+    meshtastic_NeighborInfo neighborInfo = meshtastic_NeighborInfo_init_zero;
+    collectNeighborInfo(&neighborInfo);
+
+    meshtastic_MeshPacket *reply = allocDataProtobuf(neighborInfo);
+
+    if (reply) {
+        lastSentReply = millis(); // Track when we sent this reply
+    }
+    return reply;
+}
+
 /*
 Collect a received neighbor info packet from another node
 Pass it to an upper client; do not persist this data on the mesh
 */
 bool NeighborInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_NeighborInfo *np)
 {
+    LOG_DEBUG("NeighborInfo: handleReceivedProtobuf");
     if (np) {
         printNeighborInfo("RECEIVED", np);
-        updateNeighbors(mp, np);
+        // Ignore dummy/interceptable packets: single neighbor with nodeId 0 and snr 0
+        if (np->neighbors_count != 1 || np->neighbors[0].node_id != 0 || np->neighbors[0].snr != 0.0f) {
+            LOG_DEBUG("  Updating neighbours");
+            updateNeighbors(mp, np);
+        } else {
+            LOG_DEBUG("  Ignoring dummy neighbor info packet (single neighbor with nodeId 0, snr 0)");
+        }
     } else if (mp.hop_start != 0 && mp.hop_start == mp.hop_limit) {
+        LOG_DEBUG("Get or create neighbor: %u with snr %f", mp.from, mp.rx_snr);
         // If the hopLimit is the same as hopStart, then it is a neighbor
-        getOrCreateNeighbor(mp.from, mp.from, 0, mp.rx_snr); // Set the broadcast interval to 0, as we don't know it
+        getOrCreateNeighbor(mp.from, mp.from, 0,
+                            mp.rx_snr); // Set the broadcast interval to 0, as we don't know it
     }
     // Allow others to handle this packet
     return false;
 }
 
 /*
-Copy the content of a current NeighborInfo packet into a new one and update the last_sent_by_id to our NodeNum
+Copy the content of a current NeighborInfo packet into a new one and update the
+last_sent_by_id to our NodeNum
 */
 void NeighborInfoModule::alterReceivedProtobuf(meshtastic_MeshPacket &p, meshtastic_NeighborInfo *n)
 {
@@ -168,8 +200,10 @@ void NeighborInfoModule::resetNeighbors()
 
 void NeighborInfoModule::updateNeighbors(const meshtastic_MeshPacket &mp, const meshtastic_NeighborInfo *np)
 {
-    // The last sent ID will be 0 if the packet is from the phone, which we don't count as
-    // an edge. So we assume that if it's zero, then this packet is from our node.
+    LOG_DEBUG("updateNeighbors");
+    // The last sent ID will be 0 if the packet is from the phone, which we don't
+    // count as an edge. So we assume that if it's zero, then this packet is from
+    // our node.
     if (mp.which_payload_variant == meshtastic_MeshPacket_decoded_tag && mp.from) {
         getOrCreateNeighbor(mp.from, np->last_sent_by_id, np->node_broadcast_interval_secs, mp.rx_snr);
     }
@@ -188,7 +222,8 @@ meshtastic_Neighbor *NeighborInfoModule::getOrCreateNeighbor(NodeNum originalSen
             // if found, update it
             neighbors[i].snr = snr;
             neighbors[i].last_rx_time = getTime();
-            // Only if this is the original sender, the broadcast interval corresponds to it
+            // Only if this is the original sender, the broadcast interval corresponds
+            // to it
             if (originalSender == n && node_broadcast_interval_secs != 0)
                 neighbors[i].node_broadcast_interval_secs = node_broadcast_interval_secs;
             return &neighbors[i];
@@ -200,10 +235,12 @@ meshtastic_Neighbor *NeighborInfoModule::getOrCreateNeighbor(NodeNum originalSen
     new_nbr.node_id = n;
     new_nbr.snr = snr;
     new_nbr.last_rx_time = getTime();
-    // Only if this is the original sender, the broadcast interval corresponds to it
+    // Only if this is the original sender, the broadcast interval corresponds to
+    // it
     if (originalSender == n && node_broadcast_interval_secs != 0)
         new_nbr.node_broadcast_interval_secs = node_broadcast_interval_secs;
-    else // Assume the same broadcast interval as us for the neighbor if we don't know it
+    else // Assume the same broadcast interval as us for the neighbor if we don't
+         // know it
         new_nbr.node_broadcast_interval_secs = moduleConfig.neighbor_info.update_interval;
 
     if (neighbors.size() < MAX_NUM_NEIGHBORS) {

src/modules/NeighborInfoModule.h

@@ -28,6 +28,10 @@ class NeighborInfoModule : public ProtobufModule<meshtastic_NeighborInfo>, priva
      */
     virtual bool handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_NeighborInfo *nb) override;
 
+    /* Messages can be received that have the want_response bit set.  If set, this callback will be invoked
+     * so that subclasses can (optionally) send a response back to the original sender.  */
+    virtual meshtastic_MeshPacket *allocReply() override;
+
     /*
      * Collect neighbor info from the nodeDB's history, capping at a maximum number of entries and max time
      * @return the number of entries collected
@@ -66,5 +70,8 @@ class NeighborInfoModule : public ProtobufModule<meshtastic_NeighborInfo>, priva
     /* These are for debugging only */
     void printNeighborInfo(const char *header, const meshtastic_NeighborInfo *np);
     void printNodeDBNeighbors();
+
+  private:
+    uint32_t lastSentReply = 0; // Last time we sent a position reply (used for reply throttling only)
 };
 extern NeighborInfoModule *neighborInfoModule;

src/modules/SerialModule.cpp

@@ -64,7 +64,8 @@ SerialModule *serialModule;
 SerialModuleRadio *serialModuleRadio;
 
 #if defined(TTGO_T_ECHO) || defined(CANARYONE) || defined(MESHLINK) || defined(ELECROW_ThinkNode_M1) ||                          \
-    defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE)
+    defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE) || defined(ELECROW_ThinkNode_M3) ||      \
+    defined(MUZI_BASE)
 SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial")
 {
     api_type = TYPE_SERIAL;
@@ -204,7 +205,7 @@ int32_t SerialModule::runOnce()
                 Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
             }
 #elif !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                             \
-    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
+    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
 #ifdef ARCH_RP2040
                 Serial2.setFIFOSize(RX_BUFFER);
@@ -261,7 +262,7 @@ int32_t SerialModule::runOnce()
             }
 
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) &&                               \
-    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
+    !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
             else if ((moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_WS85)) {
                 processWXSerial();
 
@@ -536,7 +537,8 @@ ParsedLine parseLine(const char *line)
 void SerialModule::processWXSerial()
 {
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&              \
-    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5) && !defined(ARCH_STM32WL)
+    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) &&  \
+    !defined(ARCH_STM32WL) && !defined(MUZI_BASE)
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
     static double dir_sum_sin = 0;

src/modules/StatusLEDModule.cpp

@@ -0,0 +1,94 @@
+#include "StatusLEDModule.h"
+#include "MeshService.h"
+#include "configuration.h"
+#include <Arduino.h>
+
+/*
+StatusLEDModule manages the device's status LEDs, updating their states based on power and Bluetooth status.
+It reflects charging, charged, discharging, and Bluetooth connection states using the appropriate LEDs.
+*/
+StatusLEDModule *statusLEDModule;
+
+StatusLEDModule::StatusLEDModule() : concurrency::OSThread("StatusLEDModule")
+{
+    bluetoothStatusObserver.observe(&bluetoothStatus->onNewStatus);
+    powerStatusObserver.observe(&powerStatus->onNewStatus);
+}
+
+int StatusLEDModule::handleStatusUpdate(const meshtastic::Status *arg)
+{
+    switch (arg->getStatusType()) {
+    case STATUS_TYPE_POWER: {
+        meshtastic::PowerStatus *powerStatus = (meshtastic::PowerStatus *)arg;
+        if (powerStatus->getHasUSB()) {
+            power_state = charging;
+            if (powerStatus->getBatteryChargePercent() >= 100) {
+                power_state = charged;
+            }
+        } else {
+            power_state = discharging;
+        }
+        break;
+    }
+    case STATUS_TYPE_BLUETOOTH: {
+        meshtastic::BluetoothStatus *bluetoothStatus = (meshtastic::BluetoothStatus *)arg;
+        switch (bluetoothStatus->getConnectionState()) {
+        case meshtastic::BluetoothStatus::ConnectionState::DISCONNECTED: {
+            ble_state = unpaired;
+            PAIRING_LED_starttime = millis();
+            break;
+        }
+        case meshtastic::BluetoothStatus::ConnectionState::PAIRING: {
+            ble_state = pairing;
+            PAIRING_LED_starttime = millis();
+            break;
+        }
+        case meshtastic::BluetoothStatus::ConnectionState::CONNECTED: {
+            ble_state = connected;
+            PAIRING_LED_starttime = millis();
+            break;
+        }
+        }
+
+        break;
+    }
+    }
+    return 0;
+};
+
+int32_t StatusLEDModule::runOnce()
+{
+
+    if (power_state == charging) {
+        CHARGE_LED_state = !CHARGE_LED_state;
+    } else if (power_state == charged) {
+        CHARGE_LED_state = LED_STATE_ON;
+    } else {
+        CHARGE_LED_state = LED_STATE_OFF;
+    }
+
+    if (!config.bluetooth.enabled || PAIRING_LED_starttime + 30 * 1000 < millis()) {
+        PAIRING_LED_state = LED_STATE_OFF;
+    } else if (ble_state == unpaired) {
+        if (slowTrack) {
+            PAIRING_LED_state = !PAIRING_LED_state;
+            slowTrack = false;
+        } else {
+            slowTrack = true;
+        }
+    } else if (ble_state == pairing) {
+        PAIRING_LED_state = !PAIRING_LED_state;
+    } else {
+        PAIRING_LED_state = LED_STATE_ON;
+    }
+
+#ifdef LED_CHARGE
+    digitalWrite(LED_CHARGE, CHARGE_LED_state);
+#endif
+    // digitalWrite(green_LED_PIN, LED_STATE_OFF);
+#ifdef LED_PAIRING
+    digitalWrite(LED_PAIRING, PAIRING_LED_state);
+#endif
+
+    return (my_interval);
+}

src/modules/StatusLEDModule.h

@@ -0,0 +1,44 @@
+#pragma once
+
+#include "BluetoothStatus.h"
+#include "MeshModule.h"
+#include "PowerStatus.h"
+#include "concurrency/OSThread.h"
+#include "configuration.h"
+#include <Arduino.h>
+#include <functional>
+
+class StatusLEDModule : private concurrency::OSThread
+{
+    bool slowTrack = false;
+
+  public:
+    StatusLEDModule();
+
+    int handleStatusUpdate(const meshtastic::Status *);
+
+  protected:
+    unsigned int my_interval = 1000; // interval in millisconds
+    virtual int32_t runOnce() override;
+
+    CallbackObserver<StatusLEDModule, const meshtastic::Status *> bluetoothStatusObserver =
+        CallbackObserver<StatusLEDModule, const meshtastic::Status *>(this, &StatusLEDModule::handleStatusUpdate);
+    CallbackObserver<StatusLEDModule, const meshtastic::Status *> powerStatusObserver =
+        CallbackObserver<StatusLEDModule, const meshtastic::Status *>(this, &StatusLEDModule::handleStatusUpdate);
+
+  private:
+    bool CHARGE_LED_state = LED_STATE_OFF;
+    bool PAIRING_LED_state = LED_STATE_OFF;
+
+    uint32_t PAIRING_LED_starttime = 0;
+
+    enum PowerState { discharging, charging, charged };
+
+    PowerState power_state = discharging;
+
+    enum BLEState { unpaired, pairing, connected };
+
+    BLEState ble_state = unpaired;
+};
+
+extern StatusLEDModule *statusLEDModule;

src/modules/SystemCommandsModule.cpp

@@ -85,10 +85,8 @@ int SystemCommandsModule::handleInputEvent(const InputEvent *event)
     switch (event->inputEvent) {
         // GPS
     case INPUT_BROKER_GPS_TOGGLE:
-        LOG_WARN("GPS Toggle");
 #if !MESHTASTIC_EXCLUDE_GPS
         if (gps) {
-            LOG_WARN("GPS Toggle2");
             if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED &&
                 config.position.fixed_position == false) {
                 nodeDB->clearLocalPosition();

src/modules/Telemetry/Sensor/AHT10.cpp

@@ -35,7 +35,7 @@ bool AHT10Sensor::getMetrics(meshtastic_Telemetry *measurement)
     // prefer other sensors like bmp280, bmp3xx
     if (!measurement->variant.environment_metrics.has_temperature) {
         measurement->variant.environment_metrics.has_temperature = true;
-        measurement->variant.environment_metrics.temperature = temp.temperature;
+        measurement->variant.environment_metrics.temperature = temp.temperature + AHT10_TEMP_OFFSET;
     }
 
     if (!measurement->variant.environment_metrics.has_relative_humidity) {

src/modules/Telemetry/Sensor/AHT10.h

@@ -6,6 +6,10 @@
 
 #if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_AHTX0.h>)
 
+#ifndef AHT10_TEMP_OFFSET
+#define AHT10_TEMP_OFFSET 0
+#endif
+
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "TelemetrySensor.h"
 #include <Adafruit_AHTX0.h>

src/modules/Telemetry/Sensor/DFRobotGravitySensor.cpp

@@ -13,7 +13,10 @@ DFRobotGravitySensor::DFRobotGravitySensor() : TelemetrySensor(meshtastic_Teleme
 DFRobotGravitySensor::~DFRobotGravitySensor()
 {
     if (gravity) {
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wdelete-non-virtual-dtor"
         delete gravity;
+#pragma GCC diagnostic pop
         gravity = nullptr;
     }
 }

src/modules/TraceRouteModule.cpp

@@ -11,6 +11,113 @@ extern graphics::Screen *screen;
 
 TraceRouteModule *traceRouteModule;
 
+void TraceRouteModule::setResultText(const String &text)
+{
+    resultText = text;
+    resultLines.clear();
+    resultLinesDirty = true;
+}
+
+void TraceRouteModule::clearResultLines()
+{
+    resultLines.clear();
+    resultLinesDirty = false;
+}
+#if HAS_SCREEN
+void TraceRouteModule::rebuildResultLines(OLEDDisplay *display)
+{
+    if (!display) {
+        resultLinesDirty = false;
+        return;
+    }
+
+    resultLines.clear();
+
+    if (resultText.length() == 0) {
+        resultLinesDirty = false;
+        return;
+    }
+
+    int maxWidth = display->getWidth() - 4;
+    if (maxWidth <= 0) {
+        resultLinesDirty = false;
+        return;
+    }
+
+    int start = 0;
+    int textLength = resultText.length();
+
+    while (start <= textLength) {
+        int newlinePos = resultText.indexOf('\n', start);
+        String segment;
+
+        if (newlinePos != -1) {
+            segment = resultText.substring(start, newlinePos);
+            start = newlinePos + 1;
+        } else {
+            segment = resultText.substring(start);
+            start = textLength + 1;
+        }
+
+        if (segment.length() == 0) {
+            resultLines.push_back("");
+            continue;
+        }
+
+        if (display->getStringWidth(segment) <= maxWidth) {
+            resultLines.push_back(segment);
+            continue;
+        }
+
+        String remaining = segment;
+
+        while (remaining.length() > 0) {
+            String tempLine = "";
+            int lastGoodBreak = -1;
+            bool lineComplete = false;
+
+            for (int i = 0; i < static_cast<int>(remaining.length()); i++) {
+                char ch = remaining.charAt(i);
+                String testLine = tempLine + ch;
+
+                if (display->getStringWidth(testLine) > maxWidth) {
+                    if (lastGoodBreak >= 0) {
+                        resultLines.push_back(remaining.substring(0, lastGoodBreak + 1));
+                        remaining = remaining.substring(lastGoodBreak + 1);
+                        lineComplete = true;
+                        break;
+                    } else if (tempLine.length() > 0) {
+                        resultLines.push_back(tempLine);
+                        remaining = remaining.substring(i);
+                        lineComplete = true;
+                        break;
+                    } else {
+                        resultLines.push_back(String(ch));
+                        remaining = remaining.substring(i + 1);
+                        lineComplete = true;
+                        break;
+                    }
+                } else {
+                    tempLine = testLine;
+                    if (ch == ' ' || ch == '>' || ch == '<' || ch == '-' || ch == '(' || ch == ')' || ch == ',') {
+                        lastGoodBreak = i;
+                    }
+                }
+            }
+
+            if (!lineComplete) {
+                if (tempLine.length() > 0) {
+                    resultLines.push_back(tempLine);
+                }
+                break;
+            }
+        }
+    }
+
+    resultLinesDirty = false;
+}
+#endif
+
 bool TraceRouteModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_RouteDiscovery *r)
 {
     // We only alter the packet in alterReceivedProtobuf()
@@ -406,7 +513,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     if (node == 0 || node == NODENUM_BROADCAST) {
         LOG_ERROR("Invalid node number for trace route: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Invalid node";
+        setResultText("Invalid node");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -420,7 +527,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     if (node == nodeDB->getNodeNum()) {
         LOG_ERROR("Cannot trace route to self: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Cannot trace self";
+        setResultText("Cannot trace self");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -447,6 +554,8 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
         unsigned long wait = (cooldownMs - (now - lastTraceRouteTime)) / 1000;
         bannerText = String("Wait for ") + String(wait) + String("s");
         runState = TRACEROUTE_STATE_COOLDOWN;
+        resultText = "";
+        clearResultLines();
 
         requestFocus();
         UIFrameEvent e;
@@ -459,6 +568,8 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     tracingNode = node;
     lastTraceRouteTime = now;
     runState = TRACEROUTE_STATE_TRACKING;
+    resultText = "";
+    clearResultLines();
     bannerText = String("Tracing ") + getNodeName(node);
 
     LOG_INFO("TraceRoute UI: Starting trace route to node 0x%08x, requesting focus", node);
@@ -501,7 +612,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
         } else {
             LOG_ERROR("MeshService is NULL!");
             runState = TRACEROUTE_STATE_RESULT;
-            resultText = "Service unavailable";
+            setResultText("Service unavailable");
             resultShowTime = millis();
             tracingNode = 0;
 
@@ -514,7 +625,7 @@ bool TraceRouteModule::startTraceRoute(NodeNum node)
     } else {
         LOG_ERROR("Failed to allocate TraceRoute packet from router");
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Failed to send";
+        setResultText("Failed to send");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -532,7 +643,7 @@ void TraceRouteModule::launch(NodeNum node)
     if (node == 0 || node == NODENUM_BROADCAST) {
         LOG_ERROR("Invalid node number for trace route: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Invalid node";
+        setResultText("Invalid node");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -546,7 +657,7 @@ void TraceRouteModule::launch(NodeNum node)
     if (node == nodeDB->getNodeNum()) {
         LOG_ERROR("Cannot trace route to self: 0x%08x", node);
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Cannot trace self";
+        setResultText("Cannot trace self");
         resultShowTime = millis();
         tracingNode = 0;
 
@@ -568,6 +679,8 @@ void TraceRouteModule::launch(NodeNum node)
         unsigned long wait = (cooldownMs - (now - lastTraceRouteTime)) / 1000;
         bannerText = String("Wait for ") + String(wait) + String("s");
         runState = TRACEROUTE_STATE_COOLDOWN;
+        resultText = "";
+        clearResultLines();
 
         requestFocus();
         UIFrameEvent e;
@@ -580,6 +693,8 @@ void TraceRouteModule::launch(NodeNum node)
     runState = TRACEROUTE_STATE_TRACKING;
     tracingNode = node;
     lastTraceRouteTime = now;
+    resultText = "";
+    clearResultLines();
     bannerText = String("Tracing ") + getNodeName(node);
 
     requestFocus();
@@ -614,14 +729,14 @@ void TraceRouteModule::launch(NodeNum node)
         } else {
             LOG_ERROR("MeshService is NULL!");
             runState = TRACEROUTE_STATE_RESULT;
-            resultText = "Service unavailable";
+            setResultText("Service unavailable");
             resultShowTime = millis();
             tracingNode = 0;
         }
     } else {
         LOG_ERROR("Failed to allocate TraceRoute packet from router");
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "Failed to send";
+        setResultText("Failed to send");
         resultShowTime = millis();
         tracingNode = 0;
     }
@@ -629,7 +744,7 @@ void TraceRouteModule::launch(NodeNum node)
 
 void TraceRouteModule::handleTraceRouteResult(const String &result)
 {
-    resultText = result;
+    setResultText(result);
     runState = TRACEROUTE_STATE_RESULT;
     resultShowTime = millis();
     tracingNode = 0;
@@ -679,83 +794,15 @@ void TraceRouteModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state
         display->setFont(FONT_SMALL);
 
         if (resultText.length() > 0) {
-            std::vector<String> lines;
-            String currentLine = "";
-            int maxWidth = display->getWidth() - 4;
-
-            int start = 0;
-            int newlinePos = resultText.indexOf('\n', start);
-
-            while (newlinePos != -1 || start < static_cast<int>(resultText.length())) {
-                String segment;
-                if (newlinePos != -1) {
-                    segment = resultText.substring(start, newlinePos);
-                    start = newlinePos + 1;
-                    newlinePos = resultText.indexOf('\n', start);
-                } else {
-                    segment = resultText.substring(start);
-                    start = resultText.length();
-                }
-
-                if (display->getStringWidth(segment) <= maxWidth) {
-                    lines.push_back(segment);
-                } else {
-                    // Try to break at better positions (space, >, <, -)
-                    String remaining = segment;
-
-                    while (remaining.length() > 0) {
-                        String tempLine = "";
-                        int lastGoodBreak = -1;
-                        bool lineComplete = false;
-
-                        for (int i = 0; i < static_cast<int>(remaining.length()); i++) {
-                            char ch = remaining.charAt(i);
-                            String testLine = tempLine + ch;
-
-                            if (display->getStringWidth(testLine) > maxWidth) {
-                                if (lastGoodBreak >= 0) {
-                                    // Break at the last good position
-                                    lines.push_back(remaining.substring(0, lastGoodBreak + 1));
-                                    remaining = remaining.substring(lastGoodBreak + 1);
-                                    lineComplete = true;
-                                    break;
-                                } else if (tempLine.length() > 0) {
-                                    lines.push_back(tempLine);
-                                    remaining = remaining.substring(i);
-                                    lineComplete = true;
-                                    break;
-                                } else {
-                                    // Single character exceeds width
-                                    lines.push_back(String(ch));
-                                    remaining = remaining.substring(i + 1);
-                                    lineComplete = true;
-                                    break;
-                                }
-                            } else {
-                                tempLine = testLine;
-                                // Mark good break positions
-                                if (ch == ' ' || ch == '>' || ch == '<' || ch == '-' || ch == '(' || ch == ')') {
-                                    lastGoodBreak = i;
-                                }
-                            }
-                        }
-
-                        if (!lineComplete) {
-                            // Reached end of remaining text
-                            if (tempLine.length() > 0) {
-                                lines.push_back(tempLine);
-                            }
-                            break;
-                        }
-                    }
-                }
+            if (resultLinesDirty) {
+                rebuildResultLines(display);
             }
 
             int lineHeight = FONT_HEIGHT_SMALL + 1; // Use proper font height with 1px spacing
-            for (size_t i = 0; i < lines.size(); i++) {
+            for (size_t i = 0; i < resultLines.size(); i++) {
                 int lineY = contentStartY + (i * lineHeight);
                 if (lineY + FONT_HEIGHT_SMALL <= display->getHeight()) {
-                    display->drawString(x + 2, lineY, lines[i]);
+                    display->drawString(x + 2, lineY, resultLines[i]);
                 }
             }
         }
@@ -779,7 +826,7 @@ int32_t TraceRouteModule::runOnce()
     if (runState == TRACEROUTE_STATE_TRACKING && now - lastTraceRouteTime > trackingTimeoutMs) {
         LOG_INFO("TraceRoute timeout, no response received");
         runState = TRACEROUTE_STATE_RESULT;
-        resultText = "No response received";
+        setResultText("No response received");
         resultShowTime = now;
         tracingNode = 0;
 
@@ -815,6 +862,8 @@ int32_t TraceRouteModule::runOnce()
             // Cooldown finished
             LOG_INFO("TraceRoute cooldown finished, returning to IDLE");
             runState = TRACEROUTE_STATE_IDLE;
+            resultText = "";
+            clearResultLines();
             bannerText = "";
             UIFrameEvent e;
             e.action = UIFrameEvent::Action::REGENERATE_FRAMESET;
@@ -828,6 +877,7 @@ int32_t TraceRouteModule::runOnce()
             LOG_INFO("TraceRoute result display timeout, returning to IDLE");
             runState = TRACEROUTE_STATE_IDLE;
             resultText = "";
+            clearResultLines();
             bannerText = "";
             tracingNode = 0;
             UIFrameEvent e;

src/modules/TraceRouteModule.h

@@ -7,6 +7,7 @@
 #if HAS_SCREEN
 #include "OLEDDisplayUi.h"
 #endif
+#include <vector>
 
 #define ROUTE_SIZE sizeof(((meshtastic_RouteDiscovery *)0)->route) / sizeof(((meshtastic_RouteDiscovery *)0)->route[0])
 
@@ -49,6 +50,11 @@ class TraceRouteModule : public ProtobufModule<meshtastic_RouteDiscovery>,
     virtual int32_t runOnce() override;
 
   private:
+    void setResultText(const String &text);
+    void clearResultLines();
+#if HAS_SCREEN
+    void rebuildResultLines(OLEDDisplay *display);
+#endif
     // Call to add unknown hops (e.g. when a node couldn't decrypt it) to the route based on hopStart and current hopLimit
     void insertUnknownHops(meshtastic_MeshPacket &p, meshtastic_RouteDiscovery *r, bool isTowardsDestination);
 
@@ -74,6 +80,8 @@ class TraceRouteModule : public ProtobufModule<meshtastic_RouteDiscovery>,
     unsigned long trackingTimeoutMs = 10000;
     String bannerText;
     String resultText;
+    std::vector<String> resultLines;
+    bool resultLinesDirty = false;
     NodeNum tracingNode = 0;
     bool initialized = false;
 };

src/motion/BMX160Sensor.cpp

@@ -115,7 +115,13 @@ int32_t BMX160Sensor::runOnce()
 void BMX160Sensor::calibrate(uint16_t forSeconds)
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN)
+    sBmx160SensorData_t magAccel;
+    sBmx160SensorData_t gAccel;
     LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
+    sensor.getAllData(&magAccel, NULL, &gAccel);
+    highestX = magAccel.x, lowestX = magAccel.x;
+    highestY = magAccel.y, lowestY = magAccel.y;
+    highestZ = magAccel.z, lowestZ = magAccel.z;
 
     doCalibration = true;
     uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
@@ -127,4 +133,4 @@ void BMX160Sensor::calibrate(uint16_t forSeconds)
 
 #endif
 
-#endif
+#endif

src/motion/ICM20948Sensor.cpp

@@ -47,6 +47,21 @@ int32_t ICM20948Sensor::runOnce()
 int32_t ICM20948Sensor::runOnce()
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
+#if defined(MUZI_BASE) // temporarily gated to single device due to feature freeze
+    if (screen && !screen->isScreenOn() && !config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
+        if (!isAsleep) {
+            LOG_DEBUG("sleeping IMU");
+            sensor->sleep(true);
+            isAsleep = true;
+        }
+        return MOTION_SENSOR_CHECK_INTERVAL_MS;
+    }
+    if (isAsleep) {
+        sensor->sleep(false);
+        isAsleep = false;
+    }
+#endif
+
     float magX = 0, magY = 0, magZ = 0;
     if (sensor->dataReady()) {
         sensor->getAGMT();
@@ -156,7 +171,20 @@ int32_t ICM20948Sensor::runOnce()
 void ICM20948Sensor::calibrate(uint16_t forSeconds)
 {
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
+    LOG_DEBUG("Old calibration data: highestX = %f, lowestX = %f, highestY = %f, lowestY = %f, highestZ = %f, lowestZ = %f",
+              highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
     LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
+    if (sensor->dataReady()) {
+        sensor->getAGMT();
+        highestX = sensor->agmt.mag.axes.x;
+        lowestX = sensor->agmt.mag.axes.x;
+        highestY = sensor->agmt.mag.axes.y;
+        lowestY = sensor->agmt.mag.axes.y;
+        highestZ = sensor->agmt.mag.axes.z;
+        lowestZ = sensor->agmt.mag.axes.z;
+    } else {
+        highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
+    }
 
     doCalibration = true;
     uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
@@ -295,4 +323,4 @@ bool ICM20948Singleton::setWakeOnMotion()
     return true;
 }
 
-#endif
+#endif

src/motion/ICM20948Sensor.h

@@ -82,7 +82,13 @@ class ICM20948Sensor : public MotionSensor
   private:
     ICM20948Singleton *sensor = nullptr;
     bool showingScreen = false;
+#ifdef MUZI_BASE
+    bool isAsleep = false;
+    float highestX = 449.000000, lowestX = -140.000000, highestY = 422.000000, lowestY = -232.000000, highestZ = 749.000000,
+          lowestZ = 98.000000;
+#else
     float highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
+#endif
 
   public:
     explicit ICM20948Sensor(ScanI2C::FoundDevice foundDevice);

src/motion/MotionSensor.cpp

@@ -69,7 +69,8 @@ void MotionSensor::wakeScreen()
 {
     if (powerFSM.getState() == &stateDARK) {
         LOG_DEBUG("Motion wakeScreen detected");
-        powerFSM.trigger(EVENT_INPUT);
+        if (config.display.wake_on_tap_or_motion)
+            powerFSM.trigger(EVENT_INPUT);
     }
 }
 
@@ -87,4 +88,4 @@ void MotionSensor::buttonPress() {}
 
 #endif
 
-#endif
+#endif

src/mqtt/MQTT.cpp

@@ -51,6 +51,7 @@ constexpr int reconnectMax = 5;
 static uint8_t bytes[meshtastic_MqttClientProxyMessage_size + 30]; // 12 for channel name and 16 for nodeid
 
 static bool isMqttServerAddressPrivate = false;
+static bool isConnected = false;
 
 inline void onReceiveProto(char *topic, byte *payload, size_t length)
 {
@@ -320,8 +321,10 @@ bool connectPubSub(const PubSubConfig &config, PubSubClient &pubSub, Client &cli
     std::string nodeId = nodeDB->getNodeId();
     const bool connected = pubSub.connect(nodeId.c_str(), config.mqttUsername, config.mqttPassword);
     if (connected) {
+        isConnected = true;
         LOG_INFO("MQTT connected");
     } else {
+        isConnected = false;
         LOG_WARN("Failed to connect to MQTT server");
     }
     return connected;
@@ -507,6 +510,7 @@ bool MQTT::publish(const char *topic, const uint8_t *payload, size_t length, boo
 
 void MQTT::reconnect()
 {
+    isConnected = false;
     if (wantsLink()) {
         if (moduleConfig.mqtt.proxy_to_client_enabled) {
             LOG_INFO("MQTT connect via client proxy instead");
@@ -534,7 +538,7 @@ void MQTT::reconnect()
             runASAP = true;
             reconnectCount = 0;
             isMqttServerAddressPrivate = isPrivateIpAddress(clientConnection->remoteIP());
-
+            isConnected = true;
             publishNodeInfo();
             sendSubscriptions();
         } else {
@@ -691,6 +695,9 @@ void MQTT::publishQueuedMessages()
     if (mqttQueue.isEmpty())
         return;
 
+    if (!moduleConfig.mqtt.proxy_to_client_enabled && !isConnected)
+        return;
+
     LOG_DEBUG("Publish enqueued MQTT message");
     const std::unique_ptr<QueueEntry> entry(mqttQueue.dequeuePtr(0));
     LOG_INFO("publish %s, %u bytes from queue", entry->topic.c_str(), entry->envBytes.size());
@@ -895,4 +902,4 @@ void MQTT::perhapsReportToMap()
 
     // Update the last report time
     last_report_to_map = millis();
-}
+}

src/nimble/NimbleBluetooth.cpp

@@ -20,13 +20,14 @@
 #include "PowerStatus.h"
 #endif
 
-#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
 #if defined(CONFIG_NIMBLE_CPP_IDF)
 #include "host/ble_gap.h"
 #else
 #include "nimble/nimble/host/include/host/ble_gap.h"
 #endif
 
+#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
+
 namespace
 {
 constexpr uint16_t kPreferredBleMtu = 517;
@@ -776,16 +777,35 @@ bool NimbleBluetooth::isConnected()
 
 int NimbleBluetooth::getRssi()
 {
-    if (bleServer && isConnected()) {
-        auto service = bleServer->getServiceByUUID(MESH_SERVICE_UUID);
-        uint16_t handle = service->getHandle();
-#ifdef NIMBLE_TWO
-        return NimBLEDevice::getClientByHandle(handle)->getRssi();
-#else
-        return NimBLEDevice::getClientByID(handle)->getRssi();
-#endif
+#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
+    if (!bleServer || !isConnected()) {
+        return 0; // No active BLE connection
     }
-    return 0; // FIXME figure out where to source this
+
+    uint16_t connHandle = nimbleBluetoothConnHandle.load();
+
+    if (connHandle == BLE_HS_CONN_HANDLE_NONE) {
+        const auto peers = bleServer->getPeerDevices();
+        if (!peers.empty()) {
+            connHandle = peers.front();
+            nimbleBluetoothConnHandle = connHandle;
+        }
+    }
+
+    if (connHandle == BLE_HS_CONN_HANDLE_NONE) {
+        return 0; // Connection handle not available yet
+    }
+
+    int8_t rssi = 0;
+    const int rc = ble_gap_conn_rssi(connHandle, &rssi);
+
+    if (rc == 0) {
+        return rssi;
+    }
+    LOG_DEBUG("BLE RSSI read failed, rc=%d", rc);
+#endif
+
+    return 0;
 }
 
 void NimbleBluetooth::setup()

src/platform/extra_variants/tbeam_displayshield/variant.cpp

@@ -0,0 +1,43 @@
+#include "configuration.h"
+
+#ifdef HAS_CST226SE
+
+#include "TouchDrvCSTXXX.hpp"
+#include "input/TouchScreenImpl1.h"
+#include <Wire.h>
+
+TouchDrvCSTXXX tsPanel;
+static constexpr uint8_t PossibleAddresses[2] = {CST328_ADDR, CST226SE_ADDR_ALT};
+uint8_t i2cAddress = 0;
+
+bool readTouch(int16_t *x, int16_t *y)
+{
+    int16_t x_array[1], y_array[1];
+    uint8_t touched = tsPanel.getPoint(x_array, y_array, 1);
+    if (touched > 0) {
+        *y = x_array[0];
+        *x = (TFT_WIDTH - y_array[0]);
+        // Check bounds
+        if (*x < 0 || *x >= TFT_WIDTH || *y < 0 || *y >= TFT_HEIGHT) {
+            return false;
+        }
+        return true; // Valid touch detected
+    }
+    return false; // No valid touch data
+}
+
+void lateInitVariant()
+{
+    tsPanel.setTouchDrvModel(TouchDrv_CST226);
+    for (uint8_t addr : PossibleAddresses) {
+        if (tsPanel.begin(Wire, addr, I2C_SDA, I2C_SCL)) {
+            i2cAddress = addr;
+            LOG_DEBUG("CST226SE init OK at address 0x%02X", addr);
+            touchScreenImpl1 = new TouchScreenImpl1(TFT_WIDTH, TFT_HEIGHT, readTouch);
+            touchScreenImpl1->init();
+            return;
+        }
+    }
+    LOG_ERROR("CST226SE init failed at all known addresses");
+}
+#endif

src/platform/nrf52/architecture.h

@@ -57,17 +57,21 @@
 #define HW_VENDOR meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO
 #elif defined(R1_NEO)
 #define HW_VENDOR meshtastic_HardwareModel_MUZI_R1_NEO
+#elif defined(RAK3401)
+#define HW_VENDOR meshtastic_HardwareModel_RAK3401
 // MAke sure all custom RAK4630 boards are defined before the generic RAK4630
 #elif defined(RAK4630)
 #define HW_VENDOR meshtastic_HardwareModel_RAK4631
-#elif defined(RAK3401)
-#define HW_VENDOR meshtastic_HardwareModel_RAK3401
 #elif defined(TTGO_T_ECHO)
 #define HW_VENDOR meshtastic_HardwareModel_T_ECHO
 #elif defined(T_ECHO_LITE)
 #define HW_VENDOR meshtastic_HardwareModel_T_ECHO_LITE
 #elif defined(ELECROW_ThinkNode_M1)
 #define HW_VENDOR meshtastic_HardwareModel_THINKNODE_M1
+#elif defined(ELECROW_ThinkNode_M3)
+#define HW_VENDOR meshtastic_HardwareModel_THINKNODE_M3
+#elif defined(ELECROW_ThinkNode_M6)
+#define HW_VENDOR meshtastic_HardwareModel_THINKNODE_M6
 #elif defined(NANO_G2_ULTRA)
 #define HW_VENDOR meshtastic_HardwareModel_NANO_G2_ULTRA
 #elif defined(CANARYONE)
@@ -104,6 +108,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1
 #elif defined(HELTEC_MESH_SOLAR)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_SOLAR
+#elif defined(MUZI_BASE)
+#define HW_VENDOR meshtastic_HardwareModel_RESERVED_FRIED_CHICKEN
 #else
 #define HW_VENDOR meshtastic_HardwareModel_NRF52_UNKNOWN
 #endif
@@ -128,7 +134,9 @@
 
 #endif
 
+#ifdef PIN_LED1
 #define LED_PIN PIN_LED1 // LED1 on nrf52840-DK
+#endif
 
 #ifdef PIN_BUTTON1
 #define BUTTON_PIN PIN_BUTTON1

src/platform/nrf52/main-nrf52.cpp

@@ -4,6 +4,14 @@
 #include <InternalFileSystem.h>
 #include <SPI.h>
 #include <Wire.h>
+
+#define APP_WATCHDOG_SECS 90
+#define NRFX_WDT_ENABLED 1
+#define NRFX_WDT0_ENABLED 1
+#define NRFX_WDT_CONFIG_NO_IRQ 1
+#include <nrfx_wdt.c>
+#include <nrfx_wdt.h>
+
 #include <assert.h>
 #include <ble_gap.h>
 #include <memory.h>
@@ -14,11 +22,22 @@
 #include "error.h"
 #include "main.h"
 #include "meshUtils.h"
+#include "power.h"
+
+#include <hal/nrf_lpcomp.h>
 
 #ifdef BQ25703A_ADDR
 #include "BQ25713.h"
 #endif
 
+// Weak empty variant initialization function.
+// May be redefined by variant files.
+void variant_shutdown() __attribute__((weak));
+void variant_shutdown() {}
+
+static nrfx_wdt_t nrfx_wdt = NRFX_WDT_INSTANCE(0);
+static nrfx_wdt_channel_id nrfx_wdt_channel_id_nrf52_main;
+
 static inline void debugger_break(void)
 {
     __asm volatile("bkpt #0x01\n\t"
@@ -202,6 +221,15 @@ void checkSDEvents()
 
 void nrf52Loop()
 {
+    {
+        static bool watchdog_running = false;
+        if (!watchdog_running) {
+            nrfx_wdt_enable(&nrfx_wdt);
+            watchdog_running = true;
+        }
+    }
+    nrfx_wdt_channel_feed(&nrfx_wdt, nrfx_wdt_channel_id_nrf52_main);
+
     checkSDEvents();
     reportLittleFSCorruptionOnce();
 }
@@ -269,6 +297,22 @@ void nrf52Setup()
     LOG_DEBUG("Set random seed %u", seed.seed32);
     randomSeed(seed.seed32);
     nRFCrypto.end();
+
+    // Set up nrfx watchdog. Do not enable the watchdog yet (we do that
+    // the first time through the main loop), so that other threads can
+    // allocate their own wdt channel to protect themselves from hangs.
+    nrfx_wdt_config_t wdt0_config = {
+        .behaviour = NRF_WDT_BEHAVIOUR_PAUSE_SLEEP_HALT, .reload_value = APP_WATCHDOG_SECS * 1000,
+        // Note: Not using wdt interrupts.
+        // .interrupt_priority = NRFX_WDT_DEFAULT_CONFIG_IRQ_PRIORITY
+    };
+    nrfx_err_t r = nrfx_wdt_init(&nrfx_wdt, &wdt0_config,
+                                 nullptr // Watchdog event handler, not used, we just reset.
+    );
+    assert(r == NRFX_SUCCESS);
+
+    r = nrfx_wdt_channel_alloc(&nrfx_wdt, &nrfx_wdt_channel_id_nrf52_main);
+    assert(r == NRFX_SUCCESS);
 }
 
 void cpuDeepSleep(uint32_t msecToWake)
@@ -352,6 +396,7 @@ void cpuDeepSleep(uint32_t msecToWake)
         NRF_GPIO->DIRCLR = (1 << pin);
     }
 #endif
+    variant_shutdown();
 
     // Sleepy trackers or sensors can low power "sleep"
     // Don't enter this if we're sleeping portMAX_DELAY, since that's a shutdown event
@@ -389,6 +434,23 @@ void cpuDeepSleep(uint32_t msecToWake)
         nrf_gpio_cfg_sense_set(BUTTON_PIN, sense);           // Apply SENSE to wake up the device from the deep sleep
 #endif
 
+#ifdef BATTERY_LPCOMP_INPUT
+        // Wake up if power rises again
+        nrf_lpcomp_config_t c;
+        c.reference = BATTERY_LPCOMP_THRESHOLD;
+        c.detection = NRF_LPCOMP_DETECT_UP;
+        c.hyst = NRF_LPCOMP_HYST_NOHYST;
+        nrf_lpcomp_configure(NRF_LPCOMP, &c);
+        nrf_lpcomp_input_select(NRF_LPCOMP, BATTERY_LPCOMP_INPUT);
+        nrf_lpcomp_enable(NRF_LPCOMP);
+
+        battery_adcEnable();
+
+        nrf_lpcomp_task_trigger(NRF_LPCOMP, NRF_LPCOMP_TASK_START);
+        while (!nrf_lpcomp_event_check(NRF_LPCOMP, NRF_LPCOMP_EVENT_READY))
+            ;
+#endif
+
         auto ok = sd_power_system_off();
         if (ok != NRF_SUCCESS) {
             LOG_ERROR("FIXME: Ignoring soft device (EasyDMA pending?) and forcing system-off!");
@@ -420,4 +482,4 @@ void enterDfuMode()
 #else
     enterUf2Dfu();
 #endif
-}
+}

src/platform/portduino/PortduinoGlue.cpp

@@ -146,6 +146,20 @@ void getMacAddr(uint8_t *dmac)
     }
 }
 
+std::string cleanupNameForAutoconf(std::string name)
+{
+    // Convert spaces -> dashes, lowercase
+
+    std::transform(name.begin(), name.end(), name.begin(), [](unsigned char c) {
+        if (c == ' ') {
+            return '-';
+        }
+        return (char)std::tolower(c);
+    });
+
+    return name;
+}
+
 /** apps run under portduino can optionally define a portduinoSetup() to
  * use portduino specific init code (such as gpioBind) to setup portduino on their host machine,
  * before running 'arduino' code.
@@ -218,6 +232,11 @@ void portduinoSetup()
     // If LoRa `Module: auto` (default in config.yaml),
     // attempt to auto config based on Product Strings
     if (portduino_config.lora_module == use_autoconf) {
+        bool found_hat = false;
+        bool found_rak_eeprom = false;
+        bool found_ch341 = false;
+
+        char hat_vendor[96] = {0};
         char autoconf_product[96] = {0};
         // Try CH341
         try {
@@ -227,21 +246,32 @@ void portduinoSetup()
             ch341Hal->getProductString(autoconf_product, 95);
             delete ch341Hal;
             std::cout << "autoconf: Found CH341 device " << autoconf_product << std::endl;
+
+            found_ch341 = true;
         } catch (...) {
             std::cout << "autoconf: Could not locate CH341 device" << std::endl;
         }
         // Try Pi HAT+
         if (strlen(autoconf_product) < 6) {
             std::cout << "autoconf: Looking for Pi HAT+..." << std::endl;
+            if (access("/proc/device-tree/hat/vendor", R_OK) == 0) {
+                std::ifstream hatVendorFile("/proc/device-tree/hat/vendor");
+                if (hatVendorFile.is_open()) {
+                    hatVendorFile.read(hat_vendor, 95);
+                    hatVendorFile.close();
+                }
+            }
             if (access("/proc/device-tree/hat/product", R_OK) == 0) {
                 std::ifstream hatProductFile("/proc/device-tree/hat/product");
                 if (hatProductFile.is_open()) {
                     hatProductFile.read(autoconf_product, 95);
                     hatProductFile.close();
                 }
-                std::cout << "autoconf: Found Pi HAT+ " << autoconf_product << " at /proc/device-tree/hat/product" << std::endl;
+                std::cout << "autoconf: Found Pi HAT+ " << hat_vendor << " " << autoconf_product << " at /proc/device-tree/hat"
+                          << std::endl;
+                found_hat = true;
             } else {
-                std::cout << "autoconf: Could not locate Pi HAT+ at /proc/device-tree/hat/product" << std::endl;
+                std::cout << "autoconf: Could not locate Pi HAT+ at /proc/device-tree/hat" << std::endl;
             }
         }
         // attempt to load autoconf data from an EEPROM on 0x50
@@ -297,6 +327,7 @@ void portduinoSetup()
                         autoconf_product[0] = 0x0;
                     } else {
                         std::cout << "autoconf: Found eeprom data " << autoconf_raw << std::endl;
+                        found_rak_eeprom = true;
                         if (mac_start != nullptr) {
                             std::cout << "autoconf: Found mac data " << mac_start << std::endl;
                             if (strlen(mac_start) == 12)
@@ -325,12 +356,29 @@ void portduinoSetup()
         if (strlen(autoconf_product) > 0) {
             // From configProducts map in PortduinoGlue.h
             std::string product_config = "";
-            try {
+
+            if (configProducts.find(autoconf_product) != configProducts.end()) {
                 product_config = configProducts.at(autoconf_product);
-            } catch (std::out_of_range &e) {
-                std::cerr << "autoconf: Unable to find config for " << autoconf_product << std::endl;
-                exit(EXIT_FAILURE);
+            } else {
+                if (found_hat) {
+                    product_config =
+                        cleanupNameForAutoconf("lora-hat-" + std::string(hat_vendor) + "-" + autoconf_product + ".yaml");
+                } else if (found_ch341) {
+                    product_config = cleanupNameForAutoconf("lora-usb-" + std::string(autoconf_product) + ".yaml");
+                }
+
+                // Don't try to automatically find config for a device with RAK eeprom.
+                if (found_rak_eeprom) {
+                    std::cerr << "autoconf: Found unknown RAK product " << autoconf_product << std::endl;
+                    exit(EXIT_FAILURE);
+                }
+                if (access((portduino_config.available_directory + product_config).c_str(), R_OK) != 0) {
+                    std::cerr << "autoconf: Unable to find config for " << autoconf_product << "(tried " << product_config << ")"
+                              << std::endl;
+                    exit(EXIT_FAILURE);
+                }
             }
+
             if (loadConfig((portduino_config.available_directory + product_config).c_str())) {
                 std::cout << "autoconf: Using " << product_config << " as config file for " << autoconf_product << std::endl;
             } else {

src/power.h

@@ -34,8 +34,8 @@
 #define OCV_ARRAY 4200, 3876, 3826, 3763, 3713, 3660, 3573, 3485, 3422, 3359, 3300
 #elif defined(SEEED_SOLAR_NODE)
 #define OCV_ARRAY 4200, 3986, 3922, 3812, 3734, 3645, 3527, 3420, 3281, 3087, 2786
-#elif defined(R1_NEO)
-#define OCV_ARRAY 4330, 4292, 4254, 4216, 4178, 4140, 4102, 4064, 4026, 3988, 3950
+#elif defined(WISMESH_TAG)
+#define OCV_ARRAY 4240, 4112, 4029, 3970, 3906, 3846, 3824, 3802, 3776, 3650, 3072
 #else // LiIon
 #define OCV_ARRAY 4190, 4050, 3990, 3890, 3800, 3720, 3630, 3530, 3420, 3300, 3100
 #endif
@@ -138,10 +138,12 @@ class Power : private concurrency::OSThread
     void reboot();
     // open circuit voltage lookup table
     uint8_t low_voltage_counter;
-    int32_t lastLogTime = 0;
+    uint32_t lastLogTime = 0;
 #ifdef DEBUG_HEAP
     uint32_t lastheap;
 #endif
 };
 
+void battery_adcEnable();
+
 extern Power *power;

variants/esp32/tbeam/platformio.ini

@@ -4,12 +4,22 @@ extends = esp32_base
 board = ttgo-t-beam
 board_level = pr
 board_check = true
-lib_deps =
-  ${esp32_base.lib_deps}
-build_flags = 
-  ${esp32_base.build_flags}
+lib_deps = ${esp32_base.lib_deps}
+build_flags = ${esp32_base.build_flags}
   -D TBEAM_V10
   -I variants/esp32/tbeam
   -DBOARD_HAS_PSRAM
   -mfix-esp32-psram-cache-issue
 upload_speed = 921600
+
+[env:tbeam-displayshield]
+extends = env:tbeam
+
+build_flags =
+  ${env:tbeam.build_flags}
+  -D USE_ST7796
+
+lib_deps =
+  ${env:tbeam.lib_deps}
+  https://github.com/meshtastic/st7796/archive/refs/tags/1.0.5.zip ; display addon
+  lewisxhe/SensorLib@0.3.1 ; touchscreen addon

variants/esp32/tbeam/variant.h

@@ -42,4 +42,35 @@
 #define GPS_UBLOX
 #define GPS_RX_PIN 34
 #define GPS_TX_PIN 12
-// #define GPS_DEBUG
+// #define GPS_DEBUG
+
+// Used when the display shield is chosen
+#ifdef USE_ST7796
+
+#undef EXT_NOTIFY_OUT
+#undef LED_STATE_ON
+#undef LED_PIN
+
+#define HAS_CST226SE 1
+#define HAS_TOUCHSCREEN 1
+// #define TOUCH_IRQ 35 // broken in this version of the lib 0.3.1
+#ifndef TOUCH_IRQ
+#define TOUCH_IRQ -1
+#endif
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+#define USE_VIRTUAL_KEYBOARD 1
+
+#define ST7796_NSS 25
+#define ST7796_RS 13  // DC
+#define ST7796_SDA 14 // MOSI
+#define ST7796_SCK 15
+#define ST7796_RESET 2
+#define ST7796_MISO -1
+#define ST7796_BUSY -1
+#define VTFT_LEDA 4
+#define TFT_SPI_FREQUENCY 60000000
+#define TFT_HEIGHT 222
+#define TFT_WIDTH 480
+#define BRIGHTNESS_DEFAULT 100        // Medium Low Brightness
+#define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#endif

variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini

@@ -0,0 +1,17 @@
+[env:thinknode_m3]
+extends = nrf52840_base
+board = ThinkNode-M3
+board_check = true
+debug_tool = jlink
+build_flags = 
+  ${nrf52840_base.build_flags} 
+  -Ivariants/nrf52840/ELECROW-ThinkNode-M3
+  -DELECROW_ThinkNode_M3
+  -DGPS_POWER_TOGGLE
+  -D CONFIG_NFCT_PINS_AS_GPIOS=1
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M3>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  khoih-prog/nRF52_PWM@^1.0.1
+  lewisxhe/PCF8563_Library@^1.0.1

variants/nrf52840/ELECROW-ThinkNode-M3/rfswitch.h

@@ -0,0 +1,15 @@
+#include "RadioLib.h"
+#include "nrf.h"
+
+// set RF switch configuration for ELECROW ThinkNode M3
+// ELECROW ThinkNode M3 uses DIO5 and DIO6 for RF switching
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode                  DIO5  DIO6
+    {LR11x0::MODE_STBY, {LOW, LOW}},  {LR11x0::MODE_RX, {HIGH, LOW}},
+    {LR11x0::MODE_TX, {HIGH, HIGH}},  {LR11x0::MODE_TX_HP, {LOW, HIGH}},
+    {LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
+    {LR11x0::MODE_WIFI, {LOW, LOW}},  END_OF_MODE_TABLE,
+};

variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp

@@ -0,0 +1,93 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "meshUtils.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    pinMode(KEY_POWER, OUTPUT);
+    digitalWrite(KEY_POWER, HIGH);
+    pinMode(RGB_POWER, OUTPUT);
+    digitalWrite(RGB_POWER, HIGH);
+    pinMode(green_LED_PIN, OUTPUT);
+    digitalWrite(green_LED_PIN, LED_STATE_OFF);
+    pinMode(LED_BLUE, OUTPUT);
+    pinMode(PIN_POWER_USB, INPUT);
+    pinMode(PIN_POWER_DONE, INPUT);
+    pinMode(PIN_POWER_CHRG, INPUT);
+    pinMode(BUTTON_PIN, INPUT_PULLUP);
+    pinMode(EEPROM_POWER, OUTPUT);
+    digitalWrite(EEPROM_POWER, HIGH);
+    pinMode(PIN_EN1, OUTPUT);
+    digitalWrite(PIN_EN1, HIGH);
+    pinMode(PIN_EN2, OUTPUT);
+    digitalWrite(PIN_EN2, HIGH);
+    pinMode(ACC_POWER, OUTPUT);
+    digitalWrite(ACC_POWER, LOW);
+    pinMode(DHT_POWER, OUTPUT);
+    digitalWrite(DHT_POWER, HIGH);
+    pinMode(Battery_POWER, OUTPUT);
+    digitalWrite(Battery_POWER, HIGH);
+    pinMode(GPS_POWER, OUTPUT);
+    digitalWrite(GPS_POWER, HIGH);
+}
+
+// called from main-nrf52.cpp during the cpuDeepSleep() function
+void variant_shutdown()
+{
+    digitalWrite(EEPROM_POWER, LOW);
+    digitalWrite(KEY_POWER, LOW);
+
+    for (int pin = 0; pin < 48; pin++) {
+        if (pin == PIN_POWER_USB || pin == BUTTON_PIN || pin == PIN_EN1 || pin == PIN_EN2 || pin == DHT_POWER ||
+            pin == ACC_POWER || pin == Battery_POWER || pin == GPS_POWER || pin == LR1110_SPI_MISO_PIN ||
+            pin == LR1110_SPI_MOSI_PIN || pin == LR1110_SPI_SCK_PIN || pin == LR1110_SPI_NSS_PIN || pin == LR1110_BUSY_PIN ||
+            pin == LR1110_NRESET_PIN || pin == LR1110_IRQ_PIN || pin == GPS_TX_PIN || pin == GPS_RX_PIN || pin == green_LED_PIN ||
+            pin == red_LED_PIN || pin == LED_BLUE) {
+            continue;
+        }
+        pinMode(pin, OUTPUT);
+        digitalWrite(pin, LOW);
+        if (pin >= 32) {
+            NRF_P1->DIRCLR = (1 << (pin - 32));
+        } else {
+            NRF_GPIO->DIRCLR = (1 << pin);
+        }
+    }
+
+    nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
+    nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
+    nrf_gpio_cfg_sense_set(BUTTON_PIN, sense1);
+
+    nrf_gpio_cfg_input(PIN_POWER_USB, NRF_GPIO_PIN_PULLDOWN); // Configure the pin to be woken up as an input
+    nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_HIGH;
+    nrf_gpio_cfg_sense_set(PIN_POWER_USB, sense2);
+}

variants/nrf52840/ELECROW-ThinkNode-M3/variant.h

@@ -0,0 +1,122 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_ELECROW_EINK_V1_0_
+#define _VARIANT_ELECROW_EINK_V1_0_
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+#include "WVariant.h"
+
+#define VARIANT_MCK (64000000ul)
+#define USE_LFXO // Board uses 32khz crystal for LF
+
+#define ELECROW_ThinkNode_M3 1
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// Power Pin
+#define NRF_APM
+#define GPS_POWER 14
+#define PIN_POWER_USB 31
+#define EXT_PWR_DETECT PIN_POWER_USB
+#define PIN_POWER_DONE 24
+#define PIN_POWER_CHRG 32
+#define KEY_POWER 16
+#define ACC_POWER 2
+#define DHT_POWER 3
+#define Battery_POWER 17
+#define RGB_POWER 29
+#define EEPROM_POWER 7
+
+// LED
+#define red_LED_PIN 33
+#define LED_POWER red_LED_PIN
+#define LED_CHARGE LED_POWER // Signals the Status LED Module to handle this LED
+#define green_LED_PIN 35
+#define LED_BLUE 37
+#define LED_PAIRING LED_BLUE // Signals the Status LED Module to handle this LED
+
+#define LED_BUILTIN -1
+#define LED_STATE_ON LOW
+#define LED_STATE_OFF HIGH
+
+// BUZZER
+#define PIN_BUZZER 23
+#define PIN_EN1 36
+#define PIN_EN2 34
+/*Wire Interfaces*/
+#define WIRE_INTERFACES_COUNT 1
+#define PIN_WIRE_SDA 26
+#define PIN_WIRE_SCL 27
+
+// Temperature correction for sensor
+#define AHT10_TEMP_OFFSET -5.0
+
+/*GPS pins*/
+#define HAS_GPS 1
+#define GPS_BAUDRATE 9600
+#define PIN_GPS_RESET 25
+#define PIN_GPS_STANDBY 21
+#define GPS_TX_PIN 20
+#define GPS_RX_PIN 22
+#define GPS_THREAD_INTERVAL 50
+#define PIN_SERIAL1_RX GPS_TX_PIN
+#define PIN_SERIAL1_TX GPS_RX_PIN
+// Button
+#define BUTTON_PIN 12
+#define BUTTON_PIN_ALT (0 + 12)
+// Battery
+#define BATTERY_PIN 5
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 2.4
+#define VBAT_AR_INTERNAL AR_INTERNAL_2_4
+#define ADC_MULTIPLIER (1.75)
+/*SPI Interfaces*/
+#define SPI_INTERFACES_COUNT 1
+#define PIN_SPI_MISO (32 + 15) // P1.15 47
+#define PIN_SPI_MOSI (32 + 14) // P1.14 46
+#define PIN_SPI_SCK (32 + 13)  // P1.13 45
+#define PIN_SPI_NSS (32 + 12)  // P1.12 44
+/*LORA Interfaces*/
+#define USE_LR1110
+#define LR1110_IRQ_PIN 40
+#define LR1110_NRESET_PIN 42
+#define LR1110_BUSY_PIN 43
+#define LR1110_SPI_NSS_PIN 44
+#define LR1110_SPI_SCK_PIN 45
+#define LR1110_SPI_MOSI_PIN 46
+#define LR1110_SPI_MISO_PIN 47
+#define LR11X0_DIO3_TCXO_VOLTAGE 3.3
+#define LR11X0_DIO_AS_RF_SWITCH
+
+// PCF8563 RTC Module
+#define PCF8563_RTC 0x51
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini

@@ -0,0 +1,15 @@
+; ThinkNode M6 - Outdoor Solar Power nrf52840/sx1262 device
+[env:thinknode_m6]
+extends = nrf52840_base
+board = ThinkNode-M6
+board_check = true
+debug_tool = jlink
+
+build_flags = ${nrf52840_base.build_flags}
+  -Ivariants/nrf52840/ELECROW-ThinkNode-M6
+  -DELECROW_ThinkNode_M6
+
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M6>
+lib_deps =
+  ${nrf52840_base.lib_deps}
+  lewisxhe/PCF8563_Library@^1.0.1

variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp

@@ -0,0 +1,43 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
+    0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    pinMode(LED_CHARGE, OUTPUT);
+    ledOff(LED_CHARGE);
+
+    pinMode(LED_PAIRING, OUTPUT);
+    ledOff(LED_PAIRING);
+
+    pinMode(VDD_FLASH_EN, OUTPUT);
+    digitalWrite(VDD_FLASH_EN, HIGH);
+}

variants/nrf52840/ELECROW-ThinkNode-M6/variant.h

@@ -0,0 +1,144 @@
+/*
+ Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+ Copyright (c) 2016 Sandeep Mistry All right reserved.
+ Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU Lesser General Public License for more details.
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_ELECROW_THINKNODE_M6_
+#define _VARIANT_ELECROW_THINKNODE_M6_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define LED_BUILTIN -1
+#define LED_BLUE -1
+#define LED_CHARGE (12)
+#define LED_PAIRING (7)
+
+#define LED_STATE_ON 1
+
+// USB power detection
+#define EXT_PWR_DETECT (13)
+
+// Button
+#define PIN_BUTTON1 (17)
+
+// Battery ADC
+#define PIN_A0 (28)
+#define BATTERY_PIN PIN_A0
+#define ADC_CTRL (11)
+#define ADC_CTRL_ENABLED 1
+
+static const uint8_t A0 = PIN_A0;
+
+#define ADC_RESOLUTION 14
+#define BATTERY_SENSE_SAMPLES 30
+
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+// I2C
+#define WIRE_INTERFACES_COUNT 1
+#define PIN_WIRE_SDA (32 + 9)
+#define PIN_WIRE_SCL (8)
+
+// Peripheral power enable
+#define PIN_POWER_EN (27)
+
+// Solar charger status
+#define EXT_CHRG_DETECT (15)
+#define EXT_CHRG_DETECT_VALUE LOW
+
+// QSPI Flash
+#define PIN_QSPI_SCK (32 + 3)
+#define PIN_QSPI_CS (23)
+#define PIN_QSPI_IO0 (32 + 1)
+#define PIN_QSPI_IO1 (32 + 2)
+#define PIN_QSPI_IO2 (32 + 4)
+#define PIN_QSPI_IO3 (32 + 5)
+
+#define EXTERNAL_FLASH_DEVICES MX25R1635F
+#define EXTERNAL_FLASH_USE_QSPI
+#define VDD_FLASH_EN (21)
+
+// LoRa SX1262
+#define USE_SX1262
+#define SX126X_CS (32 + 12)
+#define SX126X_DIO1 (32 + 6)
+#define SX126X_BUSY (32 + 11)
+#define SX126X_RESET (32 + 10)
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 3.3
+
+// GPS L76K
+#define GPS_L76K
+#define GPS_BAUDRATE 9600
+#define PIN_GPS_EN (6)
+#define PIN_GPS_REINIT (29)
+#define PIN_GPS_STANDBY (30)
+#define PIN_GPS_PPS (31)
+#define GPS_TX_PIN (3)
+#define GPS_RX_PIN (2)
+#define GPS_THREAD_INTERVAL 50
+
+#define PIN_SERIAL1_RX GPS_TX_PIN
+#define PIN_SERIAL1_TX GPS_RX_PIN
+
+// Secondary UART
+#define PIN_SERIAL2_RX (22)
+#define PIN_SERIAL2_TX (24)
+
+// PCF8563 RTC Module
+#define PCF8563_RTC 0x51
+
+// SPI
+#define SPI_INTERFACES_COUNT 1
+#define PIN_SPI_MISO (32 + 15)
+#define PIN_SPI_MOSI (32 + 14)
+#define PIN_SPI_SCK (32 + 13)
+
+// Battery
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (1.75F)
+
+#define HAS_SOLAR
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -210,6 +210,16 @@ No longer populated on PCB
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER (4.916F)
 
+// rf52840 AIN2 = Pin 4
+#define BATTERY_LPCOMP_INPUT NRF_LPCOMP_INPUT_2
+
+// We have AIN2 with a VBAT divider so AIN2 = VBAT * (100/490)
+// We have the device going deep sleep under 3.1V, which is AIN2 = 0.63V
+// So we can wake up when VBAT>=VDD is restored to 3.3V, where AIN2 = 0.67V
+// Ratio 0.67/3.3 = 0.20, so we can pick a bit higher, 2/8 VDD, which means
+// VBAT=4.04V
+#define BATTERY_LPCOMP_THRESHOLD NRF_LPCOMP_REF_SUPPLY_2_8
+
 #define HAS_RTC 0
 #ifdef __cplusplus
 }

variants/nrf52840/muzi_base/platformio.ini

@@ -0,0 +1,15 @@
+[env:muzi-base]
+extends = nrf52840_base
+board = muzi-base
+build_flags = ${nrf52840_base.build_flags}
+  -I variants/nrf52840/muzi_base
+  -D MUZI_BASE
+  -D CONFIG_NFCT_PINS_AS_GPIOS=1
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+
+build_src_filter = ${nrf52840_base.build_src_filter} +<../variants/nrf52840/muzi_base>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  artronshop/ArtronShop_RX8130CE@1.0.0
+
+