* rework I2C sensor init
the goal is to only instantiate sensors that are pressend to save memory.
side effacts:
- easyer sensor integration (less C&P code)
- nodeTelemetrySensorsMap can be removed when all devices are migrated
* add missing ifdef
* refactor a bunch of more sensors
RAM -816
Flash -916
* fix build for t1000
* refactor more sensors
RAM -192
Flash -60
* improve error handling
Flash -112
* fix build
* fix build
* fix IndicatorSensor
* fix tracker-t1000-e build
not sure what magic is used but it works
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/Telemetry/Sensor/DFRobotGravitySensor.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Ham Mode ignores region regulatory limits, so regardless of whether
we set a single TX_GAIN_LORA or an array with a non-linear PA,
we shouldn't limit the power.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* update to use long names for pager
* remove duplicate
* add menu item
* fix after conflict
* menu name change. use sanitizeString
* fix formatting issue. should pass trunk now.
* remove auto-generated protobufs
* remove log, add tdeck, improvements.
---------
Co-authored-by: l0g-lab <l0g-lab@users.noreply.github.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add Power and Environmental Telemetry Hide/Show
* Allow Power and Telemetry Frames even if module disabled
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
8 months ago, when this was added to the code, the GPS probe code
was still a little flaky.
Particularly after #6114 and #6116 were added, reliability improved
for all devices as we were sending fewer calls on the bus.
Today, the T1000E is the only Meshtastic device that regularly takes
2, 3, or 4 attempts to be detected via the probe code.
Removing these lines, on my T1000E, results in the AG3335 being
detected immediately.
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Force coverage tests to run in simulation mode
* Revert "Force coverage tests to run in simulation mode"
This reverts commit e4ec719e6f.
* fix: Move `#include "variant.h"` to top of file (fixes#8276)
The original line being further down the file causes any #ifdef/defined() checks for definitions in variant.h to silently skip.
This was noticed when `USE_GC1109_PA` in Heltec v4 and Heltec Wireless Tracker failed to correct program TX_GAIN_LORA, but will also affect any variant.h-dependent configurations in this file, if they would have been defined above where the `#include` previously was.
---------
Co-authored-by: Austin Lane <vidplace7@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Force coverage tests to run in simulation mode
* Revert "Force coverage tests to run in simulation mode"
This reverts commit e4ec719e6f.
* fix: Move `#include "variant.h"` to top of file (fixes#8276)
The original line being further down the file causes any #ifdef/defined() checks for definitions in variant.h to silently skip.
This was noticed when `USE_GC1109_PA` in Heltec v4 and Heltec Wireless Tracker failed to correct program TX_GAIN_LORA, but will also affect any variant.h-dependent configurations in this file, if they would have been defined above where the `#include` previously was.
---------
Co-authored-by: Austin Lane <vidplace7@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Force coverage tests to run in simulation mode
* Revert "Force coverage tests to run in simulation mode"
This reverts commit e4ec719e6f.
* Force coverage tests to run in simulation mode
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
