Merge branch 'master' into lora-params-bug

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

platformio.ini

@@ -119,7 +119,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/3480b731d28b10d73414cf0dd7975bff745de8cf.zip
+	https://github.com/meshtastic/device-ui/archive/613c0953313bbd236f4ddc5ede447e9edf8e890a.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]

src/Power.cpp

@@ -723,6 +723,16 @@ bool Power::setup()
             runASAP = true;
         },
         CHANGE);
+#endif
+#ifdef EXT_CHRG_DETECT
+    attachInterrupt(
+        EXT_CHRG_DETECT,
+        []() {
+            power->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+        },
+        CHANGE);
 #endif
     enabled = found;
     low_voltage_counter = 0;

src/graphics/draw/MenuHandler.cpp

@@ -266,52 +266,8 @@ void menuHandler::FrequencySlotPicker()
 
     // Calculate number of channels (copied from RadioInterface::applyModemConfig())
     meshtastic_Config_LoRaConfig &loraConfig = config.lora;
-    double bw = loraConfig.bandwidth;
-    if (loraConfig.use_preset) {
-        switch (loraConfig.modem_preset) {
-        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-            bw = (myRegion->wideLora) ? 1625.0 : 500;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-            bw = (myRegion->wideLora) ? 1625.0 : 500;
-            break;
-        default:
-            bw = (myRegion->wideLora) ? 812.5 : 250;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
-            bw = (myRegion->wideLora) ? 406.25 : 125;
-            break;
-        case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
-            bw = (myRegion->wideLora) ? 406.25 : 125;
-            break;
-        }
-    } else {
-        bw = loraConfig.bandwidth;
-        if (bw == 31) // This parameter is not an integer
-            bw = 31.25;
-        if (bw == 62) // Fix for 62.5Khz bandwidth
-            bw = 62.5;
-        if (bw == 200)
-            bw = 203.125;
-        if (bw == 400)
-            bw = 406.25;
-        if (bw == 800)
-            bw = 812.5;
-        if (bw == 1600)
-            bw = 1625.0;
-    }
+    double bw = loraConfig.use_preset ? modemPresetToBwKHz(loraConfig.modem_preset, myRegion->wideLora)
+                                      : bwCodeToKHz(loraConfig.bandwidth);
 
     uint32_t numChannels = 0;
     if (myRegion) {

src/mesh/MeshRadio.h

@@ -22,4 +22,99 @@ struct RegionInfo {
 extern const RegionInfo regions[];
 extern const RegionInfo *myRegion;
 
-extern void initRegion();
+extern void initRegion();
+
+static inline float bwCodeToKHz(uint16_t bwCode)
+{
+    if (bwCode == 31)
+        return 31.25f;
+    if (bwCode == 62)
+        return 62.5f;
+    if (bwCode == 200)
+        return 203.125f;
+    if (bwCode == 400)
+        return 406.25f;
+    if (bwCode == 800)
+        return 812.5f;
+    if (bwCode == 1600)
+        return 1625.0f;
+    return (float)bwCode;
+}
+
+static inline uint16_t bwKHzToCode(float bwKHz)
+{
+    if (bwKHz > 31.24f && bwKHz < 31.26f)
+        return 31;
+    if (bwKHz > 62.49f && bwKHz < 62.51f)
+        return 62;
+    if (bwKHz > 203.12f && bwKHz < 203.13f)
+        return 200;
+    if (bwKHz > 406.24f && bwKHz < 406.26f)
+        return 400;
+    if (bwKHz > 812.49f && bwKHz < 812.51f)
+        return 800;
+    if (bwKHz > 1624.99f && bwKHz < 1625.01f)
+        return 1600;
+    return (uint16_t)(bwKHz + 0.5f);
+}
+
+static inline void modemPresetToParams(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora, float &bwKHz, uint8_t &sf,
+                                       uint8_t &cr)
+{
+    switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+        bwKHz = wideLora ? 1625.0f : 500.0f;
+        cr = 5;
+        sf = 7;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 7;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 8;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 9;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 10;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
+        bwKHz = wideLora ? 1625.0f : 500.0f;
+        cr = 8;
+        sf = 11;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
+        bwKHz = wideLora ? 406.25f : 125.0f;
+        cr = 8;
+        sf = 11;
+        break;
+    case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
+        bwKHz = wideLora ? 406.25f : 125.0f;
+        cr = 8;
+        sf = 12;
+        break;
+    default: // LONG_FAST (or illegal)
+        bwKHz = wideLora ? 812.5f : 250.0f;
+        cr = 5;
+        sf = 11;
+        break;
+    }
+}
+
+static inline float modemPresetToBwKHz(meshtastic_Config_LoRaConfig_ModemPreset preset, bool wideLora)
+{
+    float bwKHz = 0;
+    uint8_t sf = 0;
+    uint8_t cr = 0;
+    modemPresetToParams(preset, wideLora, bwKHz, sf, cr);
+    return bwKHz;
+}

src/mesh/NodeDB.cpp

@@ -13,6 +13,7 @@
 #include "PacketHistory.h"
 #include "PowerFSM.h"
 #include "RTC.h"
+#include "RadioInterface.h"
 #include "Router.h"
 #include "SPILock.h"
 #include "SafeFile.h"
@@ -1297,6 +1298,13 @@ void NodeDB::loadFromDisk()
             LOG_INFO("Loaded saved config version %d", config.version);
         }
     }
+
+    // Coerce LoRa config fields derived from presets while bootstrapping.
+    // Some clients/UI components display bandwidth/spread_factor directly from config even in preset mode.
+    if (config.has_lora && config.lora.use_preset) {
+        RadioInterface::bootstrapLoRaConfigFromPreset(config.lora);
+    }
+
     if (backupSecurity.private_key.size > 0) {
         LOG_DEBUG("Restoring backup of security config");
         config.security = backupSecurity;

src/mesh/RadioInterface.cpp

@@ -220,6 +220,34 @@ void initRegion()
     myRegion = r;
 }
 
+void RadioInterface::bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig)
+{
+    if (!loraConfig.use_preset) {
+        return;
+    }
+
+    // Find region info to determine whether "wide" LoRa is permitted (2.4 GHz uses wider bandwidth codes).
+    const RegionInfo *r = regions;
+    for (; r->code != meshtastic_Config_LoRaConfig_RegionCode_UNSET && r->code != loraConfig.region; r++)
+        ;
+
+    const bool wideLora = r ? r->wideLora : false;
+
+    float bwKHz = 0;
+    uint8_t sf = 0;
+    uint8_t cr = 0;
+    modemPresetToParams(loraConfig.modem_preset, wideLora, bwKHz, sf, cr);
+
+    // If selected preset requests a bandwidth larger than the region span, fall back to LONG_FAST.
+    if (r && (r->freqEnd - r->freqStart) < (bwKHz / 1000.0f)) {
+        loraConfig.modem_preset = meshtastic_Config_LoRaConfig_ModemPreset_LONG_FAST;
+        modemPresetToParams(loraConfig.modem_preset, wideLora, bwKHz, sf, cr);
+    }
+
+    loraConfig.bandwidth = bwKHzToCode(bwKHz);
+    loraConfig.spread_factor = sf;
+}
+
 /**
  * ## LoRaWAN for North America
 
@@ -474,54 +502,7 @@ void RadioInterface::applyModemConfig()
     bool validConfig = false; // We need to check for a valid configuration
     while (!validConfig) {
         if (loraConfig.use_preset) {
-
-            switch (loraConfig.modem_preset) {
-            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
-                bw = (myRegion->wideLora) ? 1625.0 : 500;
-                cr = 5;
-                sf = 7;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 7;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 8;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 9;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW:
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 10;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_TURBO:
-                bw = (myRegion->wideLora) ? 1625.0 : 500;
-                cr = 8;
-                sf = 11;
-                break;
-            default: // Config_LoRaConfig_ModemPreset_LONG_FAST is default. Gracefully use this is preset is something illegal.
-                bw = (myRegion->wideLora) ? 812.5 : 250;
-                cr = 5;
-                sf = 11;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_MODERATE:
-                bw = (myRegion->wideLora) ? 406.25 : 125;
-                cr = 8;
-                sf = 11;
-                break;
-            case meshtastic_Config_LoRaConfig_ModemPreset_LONG_SLOW:
-                bw = (myRegion->wideLora) ? 406.25 : 125;
-                cr = 8;
-                sf = 12;
-                break;
-            }
+            modemPresetToParams(loraConfig.modem_preset, myRegion->wideLora, bw, sf, cr);
             if (loraConfig.coding_rate >= 5 && loraConfig.coding_rate <= 8 && loraConfig.coding_rate != cr) {
                 cr = loraConfig.coding_rate;
                 LOG_INFO("Using custom Coding Rate %u", cr);
@@ -529,20 +510,7 @@ void RadioInterface::applyModemConfig()
         } else {
             sf = loraConfig.spread_factor;
             cr = loraConfig.coding_rate;
-            bw = loraConfig.bandwidth;
-
-            if (bw == 31) // This parameter is not an integer
-                bw = 31.25;
-            if (bw == 62) // Fix for 62.5Khz bandwidth
-                bw = 62.5;
-            if (bw == 200)
-                bw = 203.125;
-            if (bw == 400)
-                bw = 406.25;
-            if (bw == 800)
-                bw = 812.5;
-            if (bw == 1600)
-                bw = 1625.0;
+            bw = bwCodeToKHz(loraConfig.bandwidth);
         }
 
         if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) {

src/mesh/RadioInterface.h

@@ -7,6 +7,9 @@
 #include "airtime.h"
 #include "error.h"
 
+// Forward decls to avoid pulling generated config headers into this widely-included file.
+typedef struct _meshtastic_Config_LoRaConfig meshtastic_Config_LoRaConfig;
+
 #define MAX_TX_QUEUE 16 // max number of packets which can be waiting for transmission
 
 #define MAX_LORA_PAYLOAD_LEN 255 // max length of 255 per Semtech's datasheets on SX12xx
@@ -115,6 +118,12 @@ class RadioInterface
 
     virtual ~RadioInterface() {}
 
+    /**
+     * Coerce LoRa config fields (bandwidth/spread_factor) derived from presets.
+     * This is used during early bootstrapping so UIs that display these fields directly remain consistent.
+     */
+    static void bootstrapLoRaConfigFromPreset(meshtastic_Config_LoRaConfig &loraConfig);
+
     /**
      * Return true if we think the board can go to sleep (i.e. our tx queue is empty, we are not sending or receiving)
      *

src/modules/NodeInfoModule.cpp

@@ -2,6 +2,7 @@
 #include "Default.h"
 #include "MeshService.h"
 #include "NodeDB.h"
+#include "NodeStatus.h"
 #include "RTC.h"
 #include "Router.h"
 #include "configuration.h"
@@ -129,14 +130,17 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
         LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
         return NULL;
     }
-    // If we sent our NodeInfo less than 5 min. ago, don't send it again as it may be still underway.
-    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 5 * 60 * 1000)) {
-        LOG_DEBUG("Skip send NodeInfo since we sent it <5min ago");
+
+    // Use graduated scaling based on active mesh size (10 minute base, scales with congestion coefficient)
+    uint32_t timeoutMs = Default::getConfiguredOrDefaultMsScaled(0, 10 * 60, nodeStatus->getNumOnline());
+    if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, timeoutMs)) {
+        LOG_DEBUG("Skip send NodeInfo since we sent it <%us ago", timeoutMs / 1000);
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else if (shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 60 * 1000)) {
+        // For interactive/urgent requests (e.g., user-triggered or implicit requests), use a shorter 60s timeout
         LOG_DEBUG("Skip send NodeInfo since we sent it <60s ago");
-        ignoreRequest = true; // Mark it as ignored for MeshModule
+        ignoreRequest = true;
         return NULL;
     } else {
         ignoreRequest = false; // Don't ignore requests anymore

variants/esp32/chatter2/platformio.ini

@@ -6,6 +6,8 @@ build_flags =
   ${esp32_base.build_flags}
   -D CHATTER_2
   -I variants/esp32/chatter2
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   
 lib_deps =
   ${esp32_base.lib_deps}

variants/esp32/m5stack_core/platformio.ini

@@ -16,6 +16,8 @@ build_flags =
   ${esp32_base.build_flags}
   -I variants/esp32/m5stack_core
   -DM5STACK
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
   -DUSER_SETUP_LOADED
   -DTFT_SDA_READ
   -DTFT_DRIVER=0x9341

variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp

@@ -67,4 +67,8 @@ void variant_shutdown()
     nrf_gpio_cfg_input(PIN_BUTTON1, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
     nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
     nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
+
+    nrf_gpio_cfg_input(EXT_CHRG_DETECT, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
+    nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_LOW;
+    nrf_gpio_cfg_sense_set(EXT_CHRG_DETECT, sense2);
 }