Dayton Hamvention 2025 userPrefs

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

.github/workflows/main_matrix.yml

@@ -149,6 +149,7 @@ jobs:
     secrets: inherit
 
   test-native:
+    if: ${{ !contains(github.ref_name, 'event/') }}
     uses: ./.github/workflows/test_native.yml
 
   docker-deb-amd64:

.github/workflows/release_channels.yml

@@ -63,21 +63,17 @@ jobs:
         with:
           python-version: 3.x
 
-      - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-
       - name: Bump version.properties
         run: |
           # Bump version.properties
           chmod +x ./bin/bump_version.py
           ./bin/bump_version.py
 
+      - name: Get new release version string
+        run: |
+          echo "short=$(./bin/buildinfo.py short)" >> $GITHUB_OUTPUT
+        id: new_version
+
       - name: Ensure debian deps are installed
         run: |
           sudo apt-get update -y --fix-missing
@@ -94,7 +90,7 @@ jobs:
           # Bump org.meshtastic.meshtasticd.metainfo.xml
           pip install -r bin/bump_metainfo/requirements.txt -q
           chmod +x ./bin/bump_metainfo/bump_metainfo.py
-          ./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.version.outputs.short }}"
+          ./bin/bump_metainfo/bump_metainfo.py --file bin/org.meshtastic.meshtasticd.metainfo.xml "${{ steps.new_version.outputs.short }}"
         env:
           PIP_DISABLE_PIP_VERSION_CHECK: 1
 

.trunk/trunk.yaml

@@ -10,11 +10,11 @@ lint:
   enabled:
     - renovate@40.0.6
     - prettier@3.5.3
-    - trufflehog@3.88.26
-    - yamllint@1.37.0
+    - trufflehog@3.88.28
+    - yamllint@1.37.1
     - bandit@1.8.3
     - terrascan@1.19.9
-    - trivy@0.61.1
+    - trivy@0.62.1
     - taplo@0.9.3
     - ruff@0.11.8
     - isort@6.0.1

SECURITY.md

@@ -4,8 +4,8 @@
 
 | Firmware Version | Supported          |
 | ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
+| 2.6.x            | :white_check_mark: |
+| <= 2.5.x         | :x:                |
 
 ## Reporting a Vulnerability
 

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,9 @@
   </screenshots>
 
   <releases>
+    <release version="2.6.8" date="2025-05-05">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.8</url>
+    </release>
     <release version="2.6.7" date="2025-04-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.6.7</url>
     </release>

debian/changelog

@@ -1,9 +1,13 @@
-meshtasticd (2.5.22.0) UNRELEASED; urgency=medium
+meshtasticd (2.6.8.0) UNRELEASED; urgency=medium
 
+  [ Austin Lane ]
   * Initial packaging
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
- -- Austin Lane <github-actions[bot]@users.noreply.github.com>  Wed, 05 Feb 2025 01:10:33 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Tue, 06 May 2025 01:32:49 +0000

platformio.ini

@@ -108,7 +108,7 @@ lib_deps =
 [device-ui_base]
 lib_deps =
 	# renovate: datasource=git-refs depName=meshtastic/device-ui packageName=https://github.com/meshtastic/device-ui gitBranch=master
-	https://github.com/meshtastic/device-ui/archive/b9e2ad1222db9f5a5080248b2f018c250f0efae5.zip
+	https://github.com/meshtastic/device-ui/archive/09b1780c8f944cffbc18a8ec5713cdfe03278503.zip
 
 ; Common libs for environmental measurements in telemetry module
 [environmental_base]
@@ -122,7 +122,7 @@ lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BMP085 packageName=adafruit/library/Adafruit BMP085 Library
 	adafruit/Adafruit BMP085 Library@1.2.4
 	# renovate: datasource=custom.pio depName=Adafruit BME280 packageName=adafruit/library/Adafruit BME280 Library
-	adafruit/Adafruit BME280 Library@2.2.4
+	adafruit/Adafruit BME280 Library@2.3.0
 	# renovate: datasource=custom.pio depName=Adafruit DPS310 packageName=adafruit/library/Adafruit DPS310
 	adafruit/Adafruit DPS310@1.1.5
 	# renovate: datasource=custom.pio depName=Adafruit MCP9808 packageName=adafruit/library/Adafruit MCP9808 Library
@@ -161,8 +161,10 @@ lib_deps =
 	robtillaart/INA226@0.6.4
 	# renovate: datasource=custom.pio depName=SparkFun MAX3010x packageName=sparkfun/library/SparkFun MAX3010x Pulse and Proximity Sensor Library
 	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2
-
-; (not included in native / portduino)
+	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
+	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.3.2
+  
+  ; (not included in native / portduino)
 [environmental_extra]
 lib_deps =
 	# renovate: datasource=custom.pio depName=Adafruit BMP3XX packageName=adafruit/library/Adafruit BMP3XX Library
@@ -181,8 +183,6 @@ lib_deps =
 	adafruit/Adafruit SHT4x Library@1.0.5
 	# renovate: datasource=custom.pio depName=SparkFun Qwiic Scale NAU7802 packageName=sparkfun/library/SparkFun Qwiic Scale NAU7802 Arduino Library
 	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
-	# renovate: datasource=custom.pio depName=SparkFun 9DoF IMU Breakout ICM 20948 packageName=sparkfun/library/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library
-	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.3.0
 	# renovate: datasource=custom.pio depName=ClosedCube OPT3001 packageName=closedcube/library/ClosedCube OPT3001
 	ClosedCube OPT3001@1.1.2
 	# renovate: datasource=git-refs depName=Bosch BSEC2 packageName=https://github.com/meshtastic/Bosch-BSEC2-Library gitBranch=extra_script

renovate.json

@@ -71,7 +71,7 @@
   ],
   "packageRules": [
     {
-      "matchPackageNames": ["meshtastic/device-ui"],
+      "matchDepNames": ["meshtastic/device-ui"],
       "reviewers": ["mverch67"],
       "changelogUrl": "https://github.com/meshtastic/device-ui/compare/{{currentDigest}}...{{newDigest}}"
     }

src/ButtonThread.cpp

@@ -255,7 +255,7 @@ int32_t ButtonThread::runOnce()
                 digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
                 break;
 #endif
-#if defined(RAK_4631)
+#if !MESHTASTIC_EXCLUDE_SCREEN && HAS_SCREEN
             // 5 clicks: start accelerometer/magenetometer calibration for 30 seconds
             case 5:
                 if (accelerometerThread) {

src/main.cpp

@@ -105,7 +105,7 @@ NRF52Bluetooth *nrf52Bluetooth = nullptr;
 #include "AmbientLightingThread.h"
 #include "PowerFSMThread.h"
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 #include "motion/AccelerometerThread.h"
 AccelerometerThread *accelerometerThread = nullptr;
 #endif
@@ -692,7 +692,7 @@ void setup()
     }
 #endif
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#if !defined(ARCH_STM32WL)
     auto acc_info = i2cScanner->firstAccelerometer();
     accelerometer_found = acc_info.type != ScanI2C::DeviceType::NONE ? acc_info.address : accelerometer_found;
     LOG_DEBUG("acc_info = %i", acc_info.type);
@@ -807,7 +807,7 @@ void setup()
 #endif
 
 #if !MESHTASTIC_EXCLUDE_I2C
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
+#if !defined(ARCH_STM32WL)
     if (acc_info.type != ScanI2C::DeviceType::NONE) {
         accelerometerThread = new AccelerometerThread(acc_info.type);
     }
@@ -1300,7 +1300,12 @@ void setup()
     LOG_DEBUG("Free heap  : %7d bytes", ESP.getFreeHeap());
     LOG_DEBUG("Free PSRAM : %7d bytes", ESP.getFreePsram());
 #endif
+#if !defined(ARCH_STM32WL)
+    if (accelerometerThread)
+        accelerometerThread->calibrate(30);
+#endif
 }
+
 #endif
 uint32_t rebootAtMsec;   // If not zero we will reboot at this time (used to reboot shortly after the update completes)
 uint32_t shutdownAtMsec; // If not zero we will shutdown at this time (used to shutdown from python or mobile client)

src/main.h

@@ -58,7 +58,7 @@ extern UdpMulticastHandler *udpHandler;
 // Global Screen singleton.
 extern graphics::Screen *screen;
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 #include "motion/AccelerometerThread.h"
 extern AccelerometerThread *accelerometerThread;
 #endif

src/mesh/Channels.cpp

@@ -345,7 +345,7 @@ void Channels::setChannel(const meshtastic_Channel &c)
 
 bool Channels::anyMqttEnabled()
 {
-#if USERPREFS_EVENT_MODE
+#if USERPREFS_EVENT_MODE && !MESHTASTIC_EXCLUDE_MQTT
     // Don't publish messages on the public MQTT broker if we are in event mode
     if (mqtt && mqtt->isUsingDefaultServer()) {
         return false;

src/modules/AdminModule.cpp

@@ -38,7 +38,7 @@
 #include "modules/PositionModule.h"
 #endif
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 #include "motion/AccelerometerThread.h"
 #endif
 

src/modules/PositionModule.cpp

@@ -370,9 +370,16 @@ void PositionModule::sendOurPosition(NodeNum dest, bool wantReplies, uint8_t cha
     if (IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_TRACKER,
                   meshtastic_Config_DeviceConfig_Role_TAK_TRACKER) &&
         config.power.is_power_saving) {
-        LOG_DEBUG("Start next execution in 5s, then sleep");
+        meshtastic_ClientNotification *notification = clientNotificationPool.allocZeroed();
+        notification->level = meshtastic_LogRecord_Level_INFO;
+        notification->time = getValidTime(RTCQualityFromNet);
+        sprintf(notification->message, "Sending position and sleeping for %us interval in a moment",
+                Default::getConfiguredOrDefaultMs(config.position.position_broadcast_secs, default_broadcast_interval_secs) /
+                    1000U);
+        service->sendClientNotification(notification);
         sleepOnNextExecution = true;
-        setIntervalFromNow(5000);
+        LOG_DEBUG("Start next execution in 5s, then sleep");
+        setIntervalFromNow(FIVE_SECONDS_MS);
     }
 }
 

src/modules/SerialModule.cpp

@@ -513,7 +513,7 @@ void SerialModule::processWXSerial()
                     // Extract the current line
                     char line[meshtastic_Constants_DATA_PAYLOAD_LEN];
                     memset(line, '\0', sizeof(line));
-                    if (lineEnd - lineStart < sizeof(line) - 1) {
+                    if ((size_t)(lineEnd - lineStart) < sizeof(line) - 1) {
                         memcpy(line, &serialBytes[lineStart], lineEnd - lineStart);
 
                         ParsedLine parsed = parseLine(line);

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -675,9 +675,17 @@ bool EnvironmentTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
             service->sendToMesh(p, RX_SRC_LOCAL, true);
 
             if (config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR && config.power.is_power_saving) {
-                LOG_DEBUG("Start next execution in 5s, then sleep");
+                meshtastic_ClientNotification *notification = clientNotificationPool.allocZeroed();
+                notification->level = meshtastic_LogRecord_Level_INFO;
+                notification->time = getValidTime(RTCQualityFromNet);
+                sprintf(notification->message, "Sending telemetry and sleeping for %us interval in a moment",
+                        Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.environment_update_interval,
+                                                          default_telemetry_broadcast_interval_secs) /
+                            1000U);
+                service->sendClientNotification(notification);
                 sleepOnNextExecution = true;
-                setIntervalFromNow(5000);
+                LOG_DEBUG("Start next execution in 5s, then sleep");
+                setIntervalFromNow(FIVE_SECONDS_MS);
             }
         }
         return true;

src/motion/AccelerometerThread.h

@@ -4,7 +4,7 @@
 
 #include "configuration.h"
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 
 #include "../concurrency/OSThread.h"
 #ifdef HAS_BMA423
@@ -81,14 +81,6 @@ class AccelerometerThread : public concurrency::OSThread
             return;
         }
 
-#ifndef RAK_4631
-        if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
-            LOG_DEBUG("AccelerometerThread Disable due to no interested configurations");
-            disable();
-            return;
-        }
-#endif
-
         switch (device.type) {
 #ifdef HAS_BMA423
         case ScanI2C::DeviceType::BMA423:

src/motion/BMX160Sensor.cpp

@@ -4,7 +4,7 @@
 
 BMX160Sensor::BMX160Sensor(ScanI2C::FoundDevice foundDevice) : MotionSensor::MotionSensor(foundDevice) {}
 
-#if defined(RAK_4631) && !defined(RAK2560) && __has_include(<Rak_BMX160.h>)
+#if !defined(RAK2560) && __has_include(<Rak_BMX160.h>)
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN)
 
 // screen is defined in main.cpp

src/motion/ICM20948Sensor.cpp

@@ -1,6 +1,11 @@
 #include "ICM20948Sensor.h"
 
 #if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && __has_include(<ICM_20948.h>)
+#if !defined(MESHTASTIC_EXCLUDE_SCREEN)
+
+// screen is defined in main.cpp
+extern graphics::Screen *screen;
+#endif
 
 // Flag when an interrupt has been detected
 volatile static bool ICM20948_IRQ = false;
@@ -41,6 +46,88 @@ int32_t ICM20948Sensor::runOnce()
 
 int32_t ICM20948Sensor::runOnce()
 {
+#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
+    float magX = 0, magY = 0, magZ = 0;
+    if (sensor->dataReady()) {
+        sensor->getAGMT();
+        magX = sensor->agmt.mag.axes.x;
+        magY = sensor->agmt.mag.axes.y;
+        magZ = sensor->agmt.mag.axes.z;
+    }
+
+    if (doCalibration) {
+
+        if (!showingScreen) {
+            powerFSM.trigger(EVENT_PRESS); // keep screen alive during calibration
+            showingScreen = true;
+            screen->startAlert((FrameCallback)drawFrameCalibration);
+        }
+
+        if (magX > highestX)
+            highestX = magX;
+        if (magX < lowestX)
+            lowestX = magX;
+        if (magY > highestY)
+            highestY = magY;
+        if (magY < lowestY)
+            lowestY = magY;
+        if (magZ > highestZ)
+            highestZ = magZ;
+        if (magZ < lowestZ)
+            lowestZ = magZ;
+
+        uint32_t now = millis();
+        if (now > endCalibrationAt) {
+            doCalibration = false;
+            endCalibrationAt = 0;
+            showingScreen = false;
+            screen->endAlert();
+        }
+
+        // LOG_DEBUG("ICM20948 min_x: %.4f, max_X: %.4f, min_Y: %.4f, max_Y: %.4f, min_Z: %.4f, max_Z: %.4f", lowestX, highestX,
+        //           lowestY, highestY, lowestZ, highestZ);
+    }
+
+    magX -= (highestX + lowestX) / 2;
+    magY -= (highestY + lowestY) / 2;
+    magZ -= (highestZ + lowestZ) / 2;
+    FusionVector ga, ma;
+    ga.axis.x = (sensor->agmt.acc.axes.x);
+    ga.axis.y = -(sensor->agmt.acc.axes.y);
+    ga.axis.z = -(sensor->agmt.acc.axes.z);
+    ma.axis.x = magX;
+    ma.axis.y = magY;
+    ma.axis.z = magZ;
+
+    // If we're set to one of the inverted positions
+    if (config.display.compass_orientation > meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270) {
+        ma = FusionAxesSwap(ma, FusionAxesAlignmentNXNYPZ);
+        ga = FusionAxesSwap(ga, FusionAxesAlignmentNXNYPZ);
+    }
+
+    float heading = FusionCompassCalculateHeading(FusionConventionNed, ga, ma);
+
+    switch (config.display.compass_orientation) {
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0_INVERTED:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0:
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90_INVERTED:
+        heading += 90;
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180_INVERTED:
+        heading += 180;
+        break;
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270:
+    case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED:
+        heading += 270;
+        break;
+    }
+
+    screen->setHeading(heading);
+#endif
+
     // Wake on motion using polling  - this is not as efficient as using hardware interrupt pin (see above)
     auto status = sensor->setBank(0);
     if (sensor->status != ICM_20948_Stat_Ok) {
@@ -64,6 +151,17 @@ int32_t ICM20948Sensor::runOnce()
 
 #endif
 
+void ICM20948Sensor::calibrate(uint16_t forSeconds)
+{
+#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
+    LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
+
+    doCalibration = true;
+    uint16_t calibrateFor = forSeconds * 1000; // calibrate for seconds provided
+    endCalibrationAt = millis() + calibrateFor;
+    screen->setEndCalibration(endCalibrationAt);
+#endif
+}
 // ----------------------------------------------------------------------
 // ICM20948Singleton
 // ----------------------------------------------------------------------
@@ -121,6 +219,11 @@ bool ICM20948Singleton::init(ScanI2C::FoundDevice device)
         return false;
     }
 
+    if (startupMagnetometer(false) != ICM_20948_Stat_Ok) {
+        LOG_DEBUG("ICM20948 init magnetometer - %s", statusString());
+        return false;
+    }
+
 #ifdef ICM_20948_INT_PIN
 
     // Active low

src/motion/ICM20948Sensor.h

@@ -6,6 +6,7 @@
 
 #if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && __has_include(<ICM_20948.h>)
 
+#include "Fusion/Fusion.h"
 #include <ICM_20948.h>
 
 // Set the default gyro scale - dps250, dps500, dps1000, dps2000
@@ -80,6 +81,8 @@ class ICM20948Sensor : public MotionSensor
 {
   private:
     ICM20948Singleton *sensor = nullptr;
+    bool showingScreen = false;
+    float highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
 
   public:
     explicit ICM20948Sensor(ScanI2C::FoundDevice foundDevice);
@@ -89,6 +92,7 @@ class ICM20948Sensor : public MotionSensor
 
     // Called each time our sensor gets a chance to run
     virtual int32_t runOnce() override;
+    virtual void calibrate(uint16_t forSeconds) override;
 };
 
 #endif

src/motion/MotionSensor.cpp

@@ -31,7 +31,7 @@ ScanI2C::I2CPort MotionSensor::devicePort()
     return device.address.port;
 }
 
-#if defined(RAK_4631) & !MESHTASTIC_EXCLUDE_SCREEN
+#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
 void MotionSensor::drawFrameCalibration(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     // int x_offset = display->width() / 2;

src/motion/MotionSensor.h

@@ -49,7 +49,7 @@ class MotionSensor
     // Register a button press when a double-tap is detected
     virtual void buttonPress();
 
-#if defined(RAK_4631) & !MESHTASTIC_EXCLUDE_SCREEN
+#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
     // draw an OLED frame (currently only used by the RAK4631 BMX160 sensor)
     static void drawFrameCalibration(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
 #endif

userPrefs.jsonc

@@ -1,27 +1,27 @@
 {
   // "USERPREFS_BUTTON_PIN": "36",
-  // "USERPREFS_CHANNELS_TO_WRITE": "3",
+  "USERPREFS_CHANNELS_TO_WRITE": "3",
   // "USERPREFS_CHANNEL_0_DOWNLINK_ENABLED": "false",
-  // "USERPREFS_CHANNEL_0_NAME": "REPLACEME",
-  // "USERPREFS_CHANNEL_0_PRECISION": "14",
-  // "USERPREFS_CHANNEL_0_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }",
-  // "USERPREFS_CHANNEL_0_UPLINK_ENABLED": "true",
+  "USERPREFS_CHANNEL_0_NAME": "Hamvention",
+  "USERPREFS_CHANNEL_0_PRECISION": "14",
+  "USERPREFS_CHANNEL_0_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }",
+  "USERPREFS_CHANNEL_0_UPLINK_ENABLED": "true",
   // "USERPREFS_CHANNEL_1_DOWNLINK_ENABLED": "false",
-  // "USERPREFS_CHANNEL_1_NAME": "Node Build Chat",
+  "USERPREFS_CHANNEL_1_NAME": "NodeChat",
   // "USERPREFS_CHANNEL_1_PRECISION": "14",
-  // "USERPREFS_CHANNEL_1_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa2 }",
+  "USERPREFS_CHANNEL_1_PSK": "{ 0x4e, 0x22, 0x1d, 0x8b, 0xc3, 0x09, 0x1b, 0xe2, 0x11, 0x9c, 0x89, 0x12, 0xf2, 0x25, 0x19, 0x5d, 0x15, 0x3e, 0x30, 0x7b, 0x86, 0xb6, 0xec, 0xc4, 0x6a, 0xc3, 0x96, 0x5e, 0x9e, 0x10, 0x9d, 0xd5 }",
   // "USERPREFS_CHANNEL_1_UPLINK_ENABLED": "false",
   // "USERPREFS_CHANNEL_2_DOWNLINK_ENABLED": "false",
-  // "USERPREFS_CHANNEL_2_NAME": "Equipment Exchange",
+  "USERPREFS_CHANNEL_2_NAME": "YardSale",
   // "USERPREFS_CHANNEL_2_PRECISION": "14",
-  // "USERPREFS_CHANNEL_2_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa3 }",
+  "USERPREFS_CHANNEL_2_PSK": "{ 0x15, 0x6f, 0xfe, 0x46, 0xd4, 0x56, 0x63, 0x8a, 0x54, 0x43, 0x13, 0xf2, 0xef, 0x6c, 0x63, 0x89, 0xf0, 0x06, 0x30, 0x52, 0xce, 0x36, 0x5e, 0xb1, 0xe8, 0xbb, 0x86, 0xe6, 0x26, 0x5b, 0x1d, 0x58 }",
   // "USERPREFS_CHANNEL_2_UPLINK_ENABLED": "false",
   // "USERPREFS_CONFIG_GPS_MODE": "meshtastic_Config_PositionConfig_GpsMode_ENABLED",
-  // "USERPREFS_CONFIG_LORA_IGNORE_MQTT": "true",
+  "USERPREFS_CONFIG_LORA_IGNORE_MQTT": "true",
   // "USERPREFS_CONFIG_LORA_REGION": "meshtastic_Config_LoRaConfig_RegionCode_US",
   // "USERPREFS_CONFIG_OWNER_LONG_NAME": "My Long Name",
   // "USERPREFS_CONFIG_OWNER_SHORT_NAME": "MLN",
-  // "USERPREFS_EVENT_MODE": "1",
+  "USERPREFS_EVENT_MODE": "1",
   // "USERPREFS_FIXED_BLUETOOTH": "121212",
   // "USERPREFS_FIXED_GPS": "",
   // "USERPREFS_FIXED_GPS_ALT": "0",
@@ -30,16 +30,16 @@
   // "USERPREFS_CONFIG_SMART_POSITION_ENABLED": "false",
   // "USERPREFS_CONFIG_GPS_UPDATE_INTERVAL": "600",
   // "USERPREFS_CONFIG_POSITION_BROADCAST_INTERVAL": "1800",
-  // "USERPREFS_LORACONFIG_CHANNEL_NUM": "31",
-  // "USERPREFS_LORACONFIG_MODEM_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST",
+  "USERPREFS_LORACONFIG_CHANNEL_NUM": "31",
+  "USERPREFS_LORACONFIG_MODEM_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO",
   // "USERPREFS_USE_ADMIN_KEY_0": "{ 0xcd, 0xc0, 0xb4, 0x3c, 0x53, 0x24, 0xdf, 0x13, 0xca, 0x5a, 0xa6, 0x0c, 0x0d, 0xec, 0x85, 0x5a, 0x4c, 0xf6, 0x1a, 0x96, 0x04, 0x1a, 0x3e, 0xfc, 0xbb, 0x8e, 0x33, 0x71, 0xe5, 0xfc, 0xff, 0x3c }",
   // "USERPREFS_USE_ADMIN_KEY_1": "{}",
   // "USERPREFS_USE_ADMIN_KEY_2": "{}",
-  // "USERPREFS_OEM_TEXT": "Caterham Car Club",
-  // "USERPREFS_OEM_FONT_SIZE": "0",
-  // "USERPREFS_OEM_IMAGE_WIDTH": "50",
-  // "USERPREFS_OEM_IMAGE_HEIGHT": "28",
-  // "USERPREFS_OEM_IMAGE_DATA": "{ 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x03, 0x00, 0x00, 0x00, 0xC0, 0x07, 0x80, 0x0F, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x18, 0xFF, 0xFF, 0x61, 0x00, 0x00, 0x00, 0x0C, 0xFF, 0xFF, 0xC7, 0x00, 0x00, 0x00, 0x0C, 0xFF, 0xFF, 0xC7, 0x00, 0x00, 0x00, 0x18, 0xFF, 0xFF, 0x67, 0x00, 0x00, 0x00, 0x18, 0x1F, 0xF0, 0x67, 0x00, 0x00, 0x00, 0x30, 0x1F, 0xF8, 0x33, 0x00, 0x00, 0x00, 0x30, 0x00, 0xFC, 0x31, 0x00, 0x00, 0x00, 0x60, 0x00, 0xFE, 0x18, 0x00, 0x00, 0x00, 0x60, 0x00, 0x7E, 0x18, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x3F, 0x0C, 0x00, 0x00, 0x00, 0xC0, 0x80, 0x1F, 0x0C, 0x00, 0x00, 0x00, 0x80, 0x81, 0x1F, 0x06, 0x00, 0x00, 0x00, 0x80, 0xC1, 0x0F, 0x06, 0x00, 0x00, 0x00, 0x00, 0xC3, 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, 0xC3, 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, 0xE6, 0x8F, 0x01, 0x00, 0x00, 0x00, 0x00, 0xEE, 0xC7, 0x01, 0x00, 0x00, 0x00, 0x00, 0x0C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00}",
+  "USERPREFS_OEM_TEXT": "Hamvention 2025",
+  "USERPREFS_OEM_FONT_SIZE": "0",
+  "USERPREFS_OEM_IMAGE_WIDTH": "50",
+  "USERPREFS_OEM_IMAGE_HEIGHT": "28",
+  "USERPREFS_OEM_IMAGE_DATA": "{ 0x00, 0xf0, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x80, 0x7f, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0xec, 0x07, 0xf0, 0x00, 0x60, 0x00, 0x00, 0xd8, 0x3b, 0x88, 0x00, 0x30, 0x00, 0x00, 0xa0, 0xe7, 0x88, 0x00, 0x18, 0x08, 0x30, 0xc0, 0xe8, 0x87, 0x01, 0x0c, 0x1c, 0x38, 0x80, 0xde, 0x03, 0x02, 0x04, 0x1e, 0x78, 0x00, 0xbd, 0x05, 0x02, 0x02, 0x0e, 0xfc, 0x00, 0x7b, 0x36, 0x03, 0x02, 0x07, 0xfe, 0x00, 0x36, 0xcf, 0x00, 0x01, 0x07, 0xce, 0x01, 0xde, 0x06, 0x00, 0x81, 0x03, 0xc7, 0x03, 0xe6, 0x06, 0x00, 0xc1, 0x81, 0x87, 0x03, 0xec, 0x04, 0x00, 0xc1, 0x81, 0x03, 0x07, 0xec, 0x02, 0x00, 0xe1, 0xc0, 0x01, 0x07, 0x7c, 0x02, 0x00, 0x71, 0xe0, 0x01, 0x0e, 0xbc, 0x01, 0x00, 0x71, 0xe0, 0x00, 0x1c, 0xce, 0x00, 0x00, 0x39, 0x70, 0x00, 0x1c, 0xf6, 0x00, 0x00, 0x12, 0x70, 0x00, 0x38, 0x6a, 0x00, 0x00, 0x02, 0x20, 0x00, 0x30, 0x2f, 0x00, 0x00, 0x04, 0x00, 0x00, 0x90, 0x1f, 0x00, 0x00, 0x08, 0x00, 0x00, 0x80, 0x0e, 0x00, 0x00, 0x18, 0x00, 0x00, 0xc0, 0x05, 0x00, 0x00, 0x20, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0xc0, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x1c, 0xe0, 0x07, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x00 }",
   // "USERPREFS_NETWORK_ENABLED_PROTOCOLS": "1", // Enable UDP mesh
   // "USERPREFS_NETWORK_WIFI_ENABLED": "true",
   // "USERPREFS_NETWORK_WIFI_SSID": "wifi_ssid",

variants/seeed_xiao_nrf52840_kit/variant.h

@@ -114,8 +114,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
 
 #define SX126X_TXEN RADIOLIB_NC
 
-#define SX126X_RXEN D4
-#define SX126X_DIO2_AS_RF_SWITCH // DIO2 is used to control the RF switch really necessary!!!
+#define SX126X_RXEN D5           // This is used to control the RX side of the RF switch
+#define SX126X_DIO2_AS_RF_SWITCH // DIO2 is used to control the TX side of the RF switch
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
 /*

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 6
-build = 7
+build = 8