In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy.
In combination, these result in a spamming of the logs when a bad time is found
When the GPS is active, we're calling the GPS thread every 0.2secs.
So this log could be printed 4,500 times in a no-lock scenario :)
Reserve this experience for developers using GPS_DEBUG.
Fixes https://github.com/meshtastic/firmware/issues/7896
* Make phone queues use a static pointer queue
* Static init
* Compile time constants now
* Instead, lets just use the normal pointerqueue for linux native builds and static for IoT platforms
* Add missing method
* Missing methods
* Update variant.h
Further to https://github.com/meshtastic/firmware/pull/7897 ,
there was another log line that was triggering indiscriminantly on
GPS_INTERVAL_THRESHOLD .
Rather than logging a bad time 4000 times, let's just log one good time
when it is set.
289f90bdbe
merged a commit that relied on
5b9db81819
but the latter commit was not merged.
This does manual wrangling to make sure the same file that exists on develop
right now ends up on master.
- Fix esptool detection to use 'version' subcommand instead of no arguments
- Fix device-update.bat to use 115200 bps for flashing, 1200 bps only for reset
- Add missing closing quotes in debug messages
Replace magic numbers with named constants for better maintainability
- Add RESET_BAUD=1200 constant for reset baud rate
- Add UPDATE_OFFSET=0x10000 constant for update flash offset
- Use constants instead of hardcoded values throughout script
Extract magic numbers to constants in shell scripts for consistency
- Add FLASH_BAUD, RESET_BAUD, UPDATE_OFFSET constants to device-update.sh
- Add RESET_BAUD, FIRMWARE_OFFSET constants to device-install.sh
- Replace hardcoded values with named constants throughout
- Maintain consistency with batch script improvements
Fix Python path quoting and remove unreachable code
- Quote Python interpreter paths to handle spaces in paths like 'C:\Program Files\Python\python.exe'
- Remove unreachable GOTO statements after EXIT /B commands
- Improve robustness when custom Python interpreters are specified
Fix esptool detection for pipx installations
- Change from checking ERRORLEVEL GEQ 2 to EQU 9009
- Pipx-installed esptool returns exit code 2 when showing help (normal)
- Only treat Windows 'command not found' error (9009) as truly not found
- Add debug output to show actual exit codes for troubleshooting
* chore(deps): update meshtastic/device-ui digest to 10f0244 (#7840)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* use branch of ina3221 library with fixes
* using commit hash instead of branch name
---------
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Add initial variant and platformio configuration for RAK WISMESHTAP V2
* Add initial variant and platformio configuration for rak wismesh tap v2
* Remove unnecessary Meshtastic build flags from rak_wismesh_tap_v2 configuration
* Enable LGFX button support in rak_wismesh_tap_v2 configuration
* Revert "Enable LGFX button support in rak_wismesh_tap_v2 configuration"
This reverts commit 2bd2c1a03b.
---------
Co-authored-by: Daniel.Cao <daniel.cao@rakwireless.com>
* Show ExternalNotification as excluded if it is
* Enable ExternalNotification, SerialModule and RangeTest on STM32WL
* Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin
* Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1)
* Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.
* Fix GPS that hard code 2080 as the start time.
Some GPS chips, such as the AG3335 in T1000e and L96 have a hardcoded
time of 2080-01-05 when they start up.
To fix that in a way that seems permanent, let's ignore times that
are more than 40 years since the firmware was built. We should followup
in late 2039 to see if any changes are needed.
Reported-By: @b8b8
* Update src/gps/RTC.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Put FORTY_YEARS in header and use in both places.
* Restore Ben's nicer log lines.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Hold for >20s after GPS lock
GPS chips are designed to stay locked for a while to download some data and save it.
This data is important for speeding up future locks, and making them higher quality.
Our present configuration could make every lock perform similar to first lock.
This patch sets a hold of between 20s and 10% of the lock search time after lock
is acquired. This should allow the GPS to finish its work before we turn it off.
Fixes https://github.com/meshtastic/firmware/issues/7466
* Remove T1000E-specific GPS holds
The new code does the same thing, for all devices.
* Fix publishing settings
* Cleanups, removing unused variables.
* ifdef log line with GPS_DEBUG
* fixQual is not a bool.
As reported by @gruberaaron , work to improve the 1200bps reset for
esptool caused all runs of device-install.bat to use 1200bps as
the baud rate.
This change removes the general SET "ESPTOOL_BAUD=1200" that was causing
the issues and places the baud settings for reset mode inside the conditional.
Fixes https://github.com/meshtastic/firmware/issues/7172
Further to https://github.com/meshtastic/firmware/pull/7772 ,
we discovered that some RTCs have hard-coded start times well in the
past.
This patch gives RTCs the same treatment as GPS - if the time is
earlier than BUILD_EPOCH, we don't use it.
Fixes#7771Fixes#7750
There are certain GPS chips that have a hard-coded time in firmware
that they will return before lock. We set our own hard-coded time,
BUILD_EPOCH, that should be newer and use the comparison to not set
a bad time.
In https://github.com/meshtastic/firmware/pull/7261 we introduced
the RTCSetResult and improved it in https://github.com/meshtastic/firmware/pull/7375 .
However, the original try-fix left logic in GPS.cpp that could
still result in broadcasting the bad time.
Further, as part of our fix we cleared the GPS buffer if we didn't
get a good time. The mesh was hurting at the time, so this was a reasonable
approach. However, given time tends to come in when we're trying to get
early lock, this had the potential side effect of throwing away valuable
information to get position lock.
This change reverses the clearBuffer and changes the logic so if time
is not set it will not be broadcast.
Fixes https://github.com/meshtastic/firmware/issues/7771
Fixes https://github.com/meshtastic/firmware/issues/7750
* Only send Neighbours if we have some to send.
The original intent of NeighborInfo was that when a NeighbourInfo
was sent all of the nodes that saw it would reply with NeighbourInfo.
So, NeighbourInfo was sent even if there were no hop-zero nodes in
the NodeDB.
Since 2023, when this was implemented, our understanding of running city-wide
meshes has improved substantially. We have taken steps to reduce the impact
of NeighborInfo over LoRa.
This change aligns with those ideas: we will now only send NeighborInfo
if we have some neighbors to contribute.
The impact of this change is that a node must first see another directly
connected node in another packet type before NeighborInfo is sent. This means
that a node with no neighbors is no longer able to trigger other nodes
to broadcast NeighborInfo. It will, however, receive the regular periodic
broadcast of NeighborInfo, and will be able to send NeighborInfo if it
has at least 1 neighbor.
* Include all the things
* AvOid memleak
* Add BaseUI support for L1 EInk
* Fix Eink offset
* Add joystick
* Updates
* Adjust Seeed Wio Tracker L1 E-Ink variant (#7326)
* Rename variant
Needs the -inkhud suffix to work correctly with the web flasher
* Display driver for ZJY122250_0213BAAMFGN
* Remove dead code from nicheGraphics.h
Remnants of T-Echo's nicheGraphics.h file, which was used as a template.
* Use ZJY122250_0213BAAMFGN driver
Improves display health. We don't need as many full refreshes now.
* Tidying
* board_check = true
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Consolidation
* Add hack for existing InkHUD button functionality
---------
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
* Add on-screen keyboard implementation on Wio Tracker L1.
* Update On-Screen Keyboard to new layout.
* The on-screen keyboard dynamically adjusts the key size based on the screen.
* Improve input box display on small screens.
* Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens.
* Optimize the text alignment of numeric keys on ssd1306.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Pro-Micro DeepSleep Quick Fix
It is noticed that some nRF52840 boards (pro-micro in particular)
stopped waking up from the deep sleep state (shutdown state)
with a press of a button.
The problem is in a Serial1.end() call.
* Clear GPREGRET before setting
There are some troubles with that register:
it is recommended to clear it with 0xFF mask
and only after that perform a setting.
* Pro-Micro button SENSE signal
Added SENSE signal on the user button.
It is explicitly enabled now for this platform.
* nRF52 pre-sleep main serial check
Added another usage check for the main Serial.
It could save some nerves in case the port is not in use by any means.
Applied trunk fmt to the file.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Initial support for the ThinkNode M5
* Update variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
Co-authored-by: Austin <vidplace7@gmail.com>
* Cleanup variant.h for Elecrow Thinknode M5
* Properly detect battery voltage
* Turn backlight off when screen sleeps
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
* feat: event mode - limit smart position updates to at most every 5m
* fix: convert 600 to 600000ms for 5min threshold
* fix: correct 5min threshold to 300000ms
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* T-watch screen misalignment fix
* Trunk fix
* Rember Last Receipient Node or channel
When a new freetext or preset message is sent and a destination is selected, the next message would forget the previously selected destination and would need to be selected again. With this fix it will remember the last destination selected until changed again.
* Fix for reply function to remember last messaged
* trunk check
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
TinyGPS Fix Quality has this information:
0 - fix not available,
1 - GPS fix,
2 - Differential GPS fix (values above 2 are 2.3 features)
3 = PPS fix
4 = Real Time Kinematic
5 = Float RTK
6 = estimated (dead reckoning)
7 = Manual input mode
8 = Simulation mode
the previous Airoha code would allow quality >0 , which includes
estimated positions. These wouldn't be passed through to the mesh
due to other checks, but would affect the Airoha GPS_FIX_HOLD_TIME
calculations.
Changes the calculation to 1 >= quality <=5 .
Expertly triaged by @philon- , turning off wifi using the HTTP API
did not work. That was because we only served the HTTP API if Wifi
was deemed to be available, but mid-way through turning it off Wifi
was still available, but the configuration we were checking said it wasn't.
This patch introduces an additional way the system can determine if Wifi
is available, by referring to the WiFi.status(). This means that in that
limbo state where Wifi has been set to be turned off, but the configuration
has not been saved and it is still up, the HTTP API will stay up long enough
to save the configuration.
Fixes https://github.com/meshtastic/firmware/issues/6965
* treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE
* stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Clear position on GPS deactivation, unless using fixed position
As reported by @dreimal8 , and confirmed by @tuxmobil , when using
and then subsequently disabling GPS the last position retrieved from
the GPS was stored and continued to be broadcast.
This change introduces a check to see if we are transitioning from
GPS Enabled to GPS Disabled or Not Present. If we are, and fixed
position is not in use, then we clear the local position.
This will prevent inaccurate and undesired position broadcasts for those
who disable their GPS.
Fixes https://github.com/meshtastic/firmware/issues/7228
* Update triple click to also clear position
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add TraceRoute function to menus and modules to support node path tracing
* Adjust text spacing and line wrapping logic in trace route result result.
* Add HAS_SCREEN for TraceRouteModule drawFrame.
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
As determined by @b8b8 , enabling NAVIC meant the more modern L5 GPS
signal was not used (L1 GPS is always available).
NAVIC, India's GNSS, probably provides the best coverage in India and
the neighbouring region. However, outside of NAVIC's coverage area, L5
GPS is highly desirable.
This patch amends the AG3335-family GPS configuration to enable L5 GPS
coverage by default. If the Lora region is set to India or Nepal,
NAVIC will be enabled instead.
* Unify the shutdown proceedure
* Don't double save nodeDB on shutdown
* Re-tool button shutdown to better correspond to tones
* Beep then save
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
We have two perhapsSetRTC functions, which are called to set the time.
The one with 3 parameters had a helpful check to reject an invalid time,
by comparing the time from the source against when the firmware was compiled.
The one with 2 parameters, which is called from the GPS lookForTime did not.
As a result, certain GPS with bad time handling could set a time that was
in the past.
This patch adds the same epoch check code to the other perhapsSetRTC method.
Fixes https://github.com/meshtastic/firmware/issues/7364
* Calculate the length of the right string and use it
* Improve readability of Version Number
* Prevent negative message IDs and proactively favorite DM'd nodes
* Patch up Remove Favorite functionality
* Fix warnings for TFT_MESH_* and hasSupportBrightness
* Fix warning around casting variables
* Correct Favorite Node Behavior to rebuild favorite nodes when updated.
* Resolve bool kb_found issue not working for second discovery keyboards
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Clock updates and some TDeck corrections
* TDeck Brightness Works in TFT Builds
* Remove HAS_TFT from enabling Brightness, disable Brightness for TDeck
* Add default textMessage frame actions and adjust SharedUIDisplay
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add new platform rak_wismeshtag
* Remove RTC and Ethernet definitions from variant.h
* Remove unused EINK and Ethernet definitions from variant.h and platformio.ini
* Add WISMESH_TAG hardware model definition in architecture.h and update build flags in platformio.ini
* Remove unused build flags and dependencies
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: daniel <daniel.cao@rakwireless.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
The screen of the heltec wireless tracker uses the same power source as the GPS. If the GPS turns off the power during the screen shutdown period and then turns on the power, the screen will not function properly. So initialize the screen every time it starts.
* Enable GPS for Wio-E5 variant on Serial2
* Add ability to override GPS serial port using GPS_SERIAL_PORT, and make RAK2560 use it.
* Don't try to send ATAK packets if ATAK is disabled, +4k flash
* No delay between UI frame rendering for OLED
* force redraw the display
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
The previous method of removing `--change-mode` from the argument list used a
string (`NEW_ARGS`) and `eval set -- $NEW_ARGS` to reconstruct the positional
parameters. This was both unsafe and incorrect.
Because `NEW_ARGS` was built using quoted literal `$arg` strings instead of the
actual values, it resulted in all filtered arguments being set to the same last
value of `$arg`. This caused `getopts` to receive incorrect input and silently
fail to parse options like `-p` and `-f`, leading to broken behavior and unset
variables (e.g., `ESPTOOL_CMD` never got a port).
This patch rewrites the logic to use an array (`NEW_ARGS+=("$arg")`), and
resets positional parameters via `set -- "${NEW_ARGS[@]}"`. This preserves
argument integrity and avoids the unsafe use of `eval`.
Example of the broken behavior before this fix:
./device-update.sh -p /dev/ttyACM0 -f firmware.bin
Resulted in:
set -- firmware.bin firmware.bin firmware.bin firmware.bin
Now:
set -- -p /dev/ttyACM0 -f firmware.bin
as expected.
Signed-off-by: Neil Hanlon <neil@shrug.pw>
* docs(xiao_ble): Simplify building and flashing instructions
- **Update Bootloader** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice
- **PlatformIO Environment Preparation** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice
- **Build Meshtastic** - simplified it greatly by referring to Meshtastic documentation
- **Flash the firmware to the Xiao BLE** - simplified it greatly as Meshtastic now builds firmware.uf2; added some observations for a succesful flash
Light cleanup of Markdown and renumbering of sections.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Replace some HTML with Markdown, cleanup Markdown
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Update SX126X_TXEN definition location
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Fresher information about E22 modules
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Instructions for E22...M33S modules
Also re-order the Build section to come after the Wiring section since the build instructions require special attention if the wiring/modules differ from the variant's expected pins/module.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Rename all XIAO BLE to XIAO nRF52840
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): Remove note about Linux since shell script is gone
Signed-off-by: Andrew Yong <me@ndoo.sg>
* docs(xiao_ble): trunk fmt and fix links
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
These DIY builds are functionally similar to the legacy xiao_ble variant, but use a pinout harmonized with the officially-supported XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic (SKU 102010710).
An additional E22-900M33S variant is provided to ensure SX1262 transmit power is set below the maximum PA input for that module, to avoid damaging it.
- seeed_xiao_nrf52840_e22_900m30s:
- XIAO nRF52840 + EBYTE E22-900M30S
- EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003)
- I2C
- SDA: D6
- SCL: D7
- User button: D0
- Gain is programmed in firmware - user Tx power setting is the desired final output power
- seeed_xiao_nrf52840_e22_900m33s:
- XIAO nRF52840 + EBYTE E22-900M33S
- EBYTE E22 pinout matching Wio-SX1262 (SKU 113010003)
- I2C
- SDA: D6
- SCL: D7
- User button: D0
- Gain is programmed in firmware - user Tx power setting is the desired final output power
Signed-off-by: Andrew Yong <me@ndoo.sg>
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28
* Merge PR #420
* Fixed double and missing Default class.
* Use correct format specifier and fixed typo.
* Removed duplicate code.
* Fix error: #if with no expression
* Fix warning: extra tokens at end of #endif directive.
* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.
* Fix deprecated macros.
* Set RP2040 in dormant mode when deep sleep is triggered.
* Fix array out of bounds read.
* Admin key count needs to be set otherwise the key will be zero loaded after reset.
* Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible.
* Remove log spam when reading INA voltage sensor.
* Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots.
* Removed newlines from log.
* Fix issue #5665.
* Fix build for Pico2 RP2350 platform.
* Enable Wifi client on Pico2W.
* Use correct processor on Pico2.
* Fix deprecated warning.
* Update platform and framework for RP2350.
* Added Pico2W variant including Wifi support.
* Fix typo in used variant.
* Remove obsolete define.
* Fix for native Linux build.
* Simplify RP2350 platform tag reference.
Co-authored-by: Austin <vidplace7@gmail.com>
* Cast user prefs strings.
* Update to last successfully building platform package.
* Define I2C GPIOs to ensure usage of both ports. Possibly fixes#5361
* RAK11310 support for RAK12002 RTC added.
* Update platform and framework packages to 4.4.3.
* Use RP2040 base platform and framework package. Use RAK11300 board definition in arduino-pico framework.
* Use RAK11300 board definition in arduino-pico framework.
* Fix build when MESHTASTIC_EXCLUDE_GPS is defined.
* Added configuration for Waveshare Pico LoRa module in combination with Orange Pi Zero3.
* Equal to upstream master.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* feat(display): enable screen wake on received messages
* feat(menu): add Screen Wakeup option in system menu
* feat(ui): update wake on message configuration and refactor save logic
* feat(TextMessageModule): conditionally trigger screen wake on received message
* Refactoring system menu options for notification and screen.
* Fix MUI options in the system menu.
* Build out Reboot/Shutdown Menu and consolidate options within it
* Trunk fixes
* Protobuf ref
* Revert generated files
* Update plumbing for screen_wakeup_menu
* Begin work on crafting a method to stop screen wake for received messages
* SharedUIDisplay.cpp doesn't need ExternalNotificationModule.h
* Stop screen wake if External Notification is enabled
* Removing extra log lines
* Add role and battery state checks for not waking screen. Menu updates to resolve some Back options not being linked
* Resolve some additional merge conflict related issues
* Shouldn't throttle the power menu
* Finalize renames of some menus
* Flip Flop MUI Menu to avoid accidental clicks
* NULL check for powerStatus
* Remove "Wakeup" eNum
* Update src/graphics/Screen.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* CoPilot was close this should fix the builds
---------
Co-authored-by: whywilson <m.tools@qq.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
The link to the product should point to the vendor's website, not a random distributor.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Tests to identify display model
* (InkHUD) SSD1682 controller IC
Has a few quirks, gets its own base class
* (InkHUD) E0213A367 Display
For Heltec Wireless Paper V1.1.1, V1.2
For Heltec VM-E213 V1.1
* (InkHUD) Select display model at boot
* (BaseUI) Wrapper to combine multiple GxEPD2 drivers
Workaround for issue of GxEPD2_BW objects not having a shared base class. Allows us to select a driver at runtime.
https://github.com/meshtastic/firmware/issues/6851#issuecomment-2905353447
* (BaseUI) Select E-Ink model at boot
* (InkHUD) SSD1682 deep sleep
* (InkHUD) No deep sleep for SSD1682
* (InkHUD) Fully no-op deep sleep for SSD1682
As reported by @KZ1R , Kazakhstan has frequencies in use for Lora devices that are not covered by our existing band selections.
This adds
* KZ_433 433.075 - 434.775 MHz <10 mW EIRP, Low Powered Devices (LPD)
* KZ_863 863 - 868 MHz <25 mW EIRP, 500kHz channels allowed, must not be used at airfields
Legal ref provided in https://github.com/meshtastic/firmware/issues/7204 and verified.
https://www.gov.kz/memleket/entities/mdai/press/article/details/6128
Order of the Ministry of Investments and Development of the Republic of Kazakhstan No. 34 dated January 21, 2015.
Published on 01 July 2024 19:03 Updated on 01 July 2024
Fixes https://github.com/meshtastic/firmware/issues/7204
* Testing battery states with some info lines in the drawCommonHeader
* Update logic of USB connected, update images for states
* Tweak battery layout for isHighResolution
* Hide the magic 101%
* Adjust padding for SENSECAP_INDICATOR
* Excessive logs are unnecessary as troubleshooting is done.
* Reduce excess code - simplify readability
* Restore Lightning Bolt for Charging and related alignment issues
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Honor custom boot screen from userPrefs.jsonc
* Meshtastic logo when powered off, userPrefs logo at boot
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Initial work on splitting notification renderer into components for reuse
* More progress
* Fix notification popup
* more fix, less crash
* Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar
* Small changes for EInk to not crowd elements
* Change System frame menu over to better match actions; added color picker for T114
* Fix build errors and add T190 for testing
* Logic gates are hard sometimes
* Screen Color Picker changes, defined Yellow as a Color.
* Additional colors and tuning
* Abandon std::sort in NodeDB, and associated fixes (#7175)
* Generate short name for nodes that don't have user yet
* Add reboot menu
* Sort fixes
* noop sort option to avoid infinite loop
* Refactor Overlay Banner
* Continuing work on Color Picker
* Add BaseUI menus to add and remove Favorited Nodes
* Create TFT_MESH_OVERRIDE for variants.h and defined colors
* Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot.
* T114 defaults to White, Yellow is now bright Yellow
* Revert "T114 defaults to White, Yellow is now bright Yellow"
This reverts commit 8d05e17f11.
* Only show OEM text if not OLED
* Adjust OEM logo to maximize visible area
* Start plumbing in Color Picker changes
* Finished plumbing
* Fix warning
* Revert "Fix warning"
This reverts commit 2e8aecd52d.
* Fix display not fully redrawing
* T-Deck should get color too
* Emote Revamp
* Update emotes.cpp
* Poo Emote fix
* Trunk fix
* Add secret test menu and number picker
* Missed bits
* Save colors between reboots
* Save Clock Face election to protobuf
* Make reboot first, then settings
* Add padding for single line pop-ups
* Compass saving and faster menus
* Resolve build issue with Excluding GPS
* Resolve issue with memory bars on EInk
* Add brightness settings for supported screen (#7182)
* Add brightness menu.
* add loop destination selection.
* Bring back color (and sanity) to the menus!
* Trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Wilson <m.tools@qq.com>
* Add 12pt fonts
* Add fontMedium
In addition to fontSmall and fontLarge
* Set fonts in nicheGraphics.h
* Change all uses of fontLarge to fontMedium
fontLarge was previously set at 9pt. fontLarge is now 12pt, fontMedium is 9pt. (NB: fonts may be customized per-variant)
* Use fontLarge with "All Messages" and "DMs" applets
* Documentation
* Added option to invert screen on InkHUD
* Rewrite to make use of existing config.display.displaymode
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add support for RAK3112 variant with necessary configurations and definitions
* Add the configuration of the LED pin
* Refactor rak3112 variant configuration: update name, remove unused files,
* Update RAK3112 configuration: refine memory settings, adjust GPS pin definitions
* Update RAK3112 hardware vendor definition to use correct model
* configure LED pins and update module definitions
* Update USB mode configuration for RAK3112 board
* Update power and battery configuration in rak3112 variant
* Cancel the modification of mesh.pb.h
* Rename RAKwireless RAK3112 to RAK3312
---------
Co-authored-by: daniel <daniel.cao@rakwireless.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update platformio inis for stm32 platform and wio-e5 variant for enabling i2c
* Don't reference timezone functions if MESHTASTIC_EXCLUDE_TZ is defined
* Use custom pow_of_two in RadioInterface instead of floating-point pow()
* First pass: enable sensors for STM32wL
* Fix AirQualityTelemetryModule being created if the PM25AQI header is missing
* Link in power sensor libraries
* more ini tweaks
* Add =1 to EXCLUDE defines, fix indentation.
* Drop HAS_WIRE in ini, it's defined in architecture.h
* Fix build when power sensor libraries are missing
Make MAX sensor integration into Power.cpp optional based on its library header existing.
Also make NullSensor expose a voltage and current sensor, because Power calls directly into these for INA sensors.
This lets us remove all the deps for the STM32WL platform.
* Change default I2C for RAK3172 to be I2C1, not I2C2
* Respect the laws of mathematics (oops)
* Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28
* Merge PR #420
* Fixed double and missing Default class.
* Use correct format specifier and fixed typo.
* Removed duplicate code.
* Fix error: #if with no expression
* Fix warning: extra tokens at end of #endif directive.
* Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board.
* Fix deprecated macros.
* Set RP2040 in dormant mode when deep sleep is triggered.
* Fix array out of bounds read.
* Admin key count needs to be set otherwise the key will be zero loaded after reset.
* Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible.
* Remove log spam when reading INA voltage sensor.
* Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots.
* Removed newlines from log.
* Fix issue #5665.
* Fix build for Pico2 RP2350 platform.
* Enable Wifi client on Pico2W.
* Use correct processor on Pico2.
* Fix deprecated warning.
* Update platform and framework for RP2350.
* Added Pico2W variant including Wifi support.
* Fix typo in used variant.
* Remove obsolete define.
* Fix for native Linux build.
* Simplify RP2350 platform tag reference.
Co-authored-by: Austin <vidplace7@gmail.com>
* Cast user prefs strings.
* Update to last successfully building platform package.
* Define I2C GPIOs to ensure usage of both ports. Possibly fixes#5361
* RAK11310 support for RAK12002 RTC added.
* Update platform and framework packages to 4.4.3.
* Use RP2040 base platform and framework package. Use RAK11300 board definition in arduino-pico framework.
* Use RAK11300 board definition in arduino-pico framework.
* Fix build when MESHTASTIC_EXCLUDE_GPS is defined.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Cram a few emoji into AdafruitGFX fonts
Values which would normally be assigned to unprintable control characters
* Another sneaky string which may contain UTF-8 chars
* Document emoji
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Log and save in config lora tx_power after limits applyng
* Log and save in config lora tx_power after limits applyng
* Trunk fmt
* Remove duplicate logic
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add detection framework for multiple AirQuality sensors
Now we have the ability to detect multiple AirQualitySensors,
follow the lead of other sensor types and create supporting methods
and objects for using this information.
Continued cherry-picking to get #4601 over the line :)
Co-Authored-By: @Coloradohusky
* Update src/main.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add detection code for SCD4X
This patch adds I2C detection support SCD40/SDC41 CO2 sensors.
It's a start to get #4601 over the line :)
Co-Authored-By: @Coloradohusky
* Remove SCD4X from Portduino
* Update Favorite Node Message Options to unify against other screens
* Rebuild Horizontal Battery, Resolve overlap concerns
* Update positioning on Message frame and fix drawCommonHeader overlay
* Beginnings of creating isHighResolution bool
* Fixup determineResolution()
* Implement isHighResolution in place of SCREEN_WIDTH > 128 checks
* Line Spacing bound to isHighResolution
* Analog Clock for all
* Add AM/PM to Analog Clock if isHighResolution and not TWatch
* Simple Menu Queue, and add time menu
* Fix prompt string for 12/24 hour picker
* More menu banners into functions
* Fix Action Menu on Home frame
* Correct pop-up calculation size and continue to leverage isHighResolution
* Move menu bits to MenuHandler
* Plumb in the digital/analog picker
* Correct Clock Face Picker title
* Clock picker fixes
* Migrate the rest of the menus to MenuHandler.*
* Add compass menu and needle point option
* Minor fix for compass point menu
* Correct Home menu into typical format
* Fix emoji bounce, overlap, and missing commonHeader
* Sanitize long_names and removed unused variables
* Slightly better sanitizeString variation
* Resolved apostrophe being shown as upside down question mark
* Gotta keep height and width in expected order
* Remove Second Hand for Analog Clock on EInk displays
* Fix Clock menu option decision tree
* Improvements to Eink Navigation
* Pause Banner for Eink moved to bottom
* Updated working for 12-/24-hour menu and Added US/Arizona to timezone picker
* Add Adhoc Ping and resolve error with std::string sanitized
* Hide quick toggle as option is available within Action Menu, commented out for the moment
* Remove old battery icon and option, use drawCommonHeader throughout, re-add battery to Clock frames
* fix misc build warnings. NFC
* Update Analog Clock on EInk to show more digits
* Establish Action Menu on all node list screens, add NodeDB reset (with confirmation) option
* Add Toggle Backlight for EInk Displays
* Suppress action screen Full refresh for Eink
* Adjust drawBluetoothConnectedIcon on TWatch
* Maintain clock frame when switching between Clock Faces
* Move modules beyond the clock in navigation
* addressed the conflicts, and changed target branch to 2.7-MiscFixes-Week1
* cleanup, cheers
* Add AM/PM to low resolution clock also
* Small adjustments to AM/PM replacement across various devices
* Resolve dangling pointer issues with sanitize code
* Update comments for Screen.cpp related to module load change
* Trunk runs
* Update message caching to correct aged timestamp
* Menu wording adjustments
* Time Format wording
* Use all the rows on EInk since with autohide the navigation bar
* Finalize Time Format picker word change
* Retired drawFunctionOverlay code
No longer being used
* Actually honor the points-north setting
* Trunk
* Compressed action list
* Update no-op showOverlayBanner function
* trunk
* Correct T_Watch_S3 specific line
* Autosized Action menu per screen
* Finalize Autosized Action menu per screen
* Unify Message Titles
* Reorder Timezones to match expectations
* Adjust text location for pop-ups
* Revert "Actually honor the points-north setting"
This reverts commit 20988aa4fa.
* Make NodeDB sort its internal vector when lastheard is updated. Don't sort in NodeListRenderer
* Update src/graphics/draw/NodeListRenderer.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Pass by reference -- Thanks Copilot!
* Throttle sorting just a touch
* Check more carefully for own node
* Eliminate some now-unneeded sorting
* Move function after include
* Putting Modules back to position 0 and some trunk checks found
* Add Scrollbar for Action menus
* Second attempt to move modules down the navigation bar
* Continue effort of moving modules in the navigation
* Canned Messages tweak
* Replicate Function + Space through the Menu System
* Move init button parameters into config struct (#7145)
* Remove bundling of web-ui from ESP32 devices (#7143)
* Fixed triple click GPS toggle bungle
* Move init button parameters into config struct
* Reapply "Actually honor the points-north setting"
This reverts commit 42c1967e7b.
* Actually do compass pointings correctly
* Tweak to node bearings
* Menu wording tweaks
* Get the compass_north_top logic right
* Don't jump frames after setting Compass
* Get rid of the extra bearingTo functions
* Don't blink Mail on EInk Clock Screens
* Actually set lat and long
* Calibrate
* Convert Radians to Degrees
* More degree vs radians fixes
* De-duplicate draw arrow function
* Don't advertise compass calibration without an accell thread.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: csrutil <keming.cao@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* initial commit of eink version
* fit for ssd1682 initial test run hud
* update to solve mirroring problem
* change eink screen ic to ssd1680
* remove HINK_E0213A367
* trunk fmt
* fix wrong type
* fix some fmt
* Do not beacon Device telemetry by default anymore
* Update
* Old default interval for sensor
* Added userpref
* Addd tracker to default telemetry roles
* Let the macro do its job in router mode
* Allow observers to respond to AdminMessage requests
Ground work for CannedMessage getters and setters
* Enable CannedMessage config in apps for InkHUD devices
* Migrate the InkHUD::Events AdminModule observer
Use the new AdminModule_ObserverData struct
* Bare-bones NicheGraphics util to access canned messages
Handles loading and parsing. Handle admin messages for setting and getting.
* Send canned messages via on-screen menu
* Change ThreadedMessageApplet from Observer to Module API
Allows us to intercept locally generated packets ('loopbackOK = true'), to handle outgoing canned messages.
* Fix: crash getting empty canned message string via Client API
* Move file into Utils subdir
* Move an include statement from .cpp to .h
* Limit strncpy size of dest, not source
Wasn't critical in ths specific case, but definitely a mistake.
* Add missed include
* Another Warning fix
* Add another HAS_SCREEN
* Namespace fixes
* Removed depricated destination types and re-factored destination screen
* Get rid of Arduino Strings
* Clean up after Copilot
* SixthLine Def, Screen Rename
Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment
* Consistency is hard - fixed "Sixth"
* System Frame Updates
Adjusted line construction to ensure we fit maximum content per screen.
* Fix up notifications
* Add a couple more ifdef HAS_SCREEN lines
* Add screen->isOverlayBannerShowing()
* Don't forget the invert!
* Adjust Nodelist Center Divider
Adjust Nodelist Center Divider
* Fix variable casting
* Fix entryText variable as empty before update to fix validation
* Altitude is int32_t
* Update PowerTelemetry to have correct data type
* Fix cppcheck warnings (#6945)
* Fix cppcheck warnings
* Adjust logic in Power.cpp for power sensor
---------
Co-authored-by: Jason P <applewiz@mac.com>
* More pixel wrangling so things line up NodeList edition
* Adjust NodeList alignments and plumb some background padding for a possible title fix
* Better alignment for banner notifications
* Move title into drawCommonHeader; initial screen tested
* Fonts make spacing items difficult
* Improved beeping booping and other buzzer based feedback (#6947)
* Improved beeping booping and other buzzer based feedback
* audible button feedback (#6949)
* Refactor
---------
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
* Sandpapered the corners of the notification popup
* Finalize drawCommonHeader migration
* Update Title of Favorite Node Screens
* Update node metric alignment on LoRa screen
* Update the border for popups to separate it from background
* Update PaxcounterModule.cpp with CommonHeader
* Update WiFi screen with CommonHeader and related data reflow
* It was not, in fact, pointing up
* Fix build on wismeshtap
* T-deck trackball debounce
* Fix uptime on Device Focused page to actually detail
* Update Sys screen for new uptime, add label to Freq/Chan on LoRa
* Don't display DOP any longer, make Uptime consistent
* Revert Uptime change on Favorites, Apply to Device Focused
* Label the satelite number to avoid confusion
* Boop boop boop boop
* Correct GPS positioning and string consistency across strings for GPS
* Fix GPS text alignment
* Enable canned messages by default
* Don't wake screen on new nodes
* Cannedmessage list emote support added
* Fn+e emote picker for freetext screen
* Actually block CannedInput actions while display is shown
* Add selection menu to bannerOverlay
* Off by one
* Move to unified text layouts and spacing
* Still my Fav without an "e"
* Fully remove EVENT_NODEDB_UPDATED
* Simply LoRa screen
* Make some char pointers const to fix compilation on native targets
* Update drawCompassNorth to include radius
* Fix warning
* button thread cleanup
* Pull OneButton handling from PowerFSM and add MUI switch (#6973)
* Trunk
* Onebutton Menu Support
* Add temporary clock icon
* Add gps location to fsi
* Banner message state reset
* Cast to char to satisfy compiler
* Better fast handling of input during banner
* Fix warning
* Derp
* oops
* Update ref
* Wire buzzer_mode
* remove legacy string->print()
* Only init screen if one found
* Unsigned Char
* More buttonThread cleaning
* screen.cpp button handling cleanup
* The Great Event Rename of 2025
* Fix the Radiomaster
* Missed trackball type change
* Remove unused function
* Make ButtonThread an InputBroker
* Coffee hadn't kicked in yet
* Add clock icon for Navigation Bar
* Restore clock screen definition code - whoops
* ExternalNotifications now observe inputBroker
* Clock rework (#6992)
* Move Clock bits into ClockRenderer space
* Rework clock into all device navigation
* T-Watch Actually Builds Different
* Compile fix
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add AM/PM to Digital Clock
* Flip Seconds and AM/PM on Clock Display
* Tik-tok pixels are hard
* Fix builds on Thinknode M1
* Check for GPS and don't crash
* Don't endif til the end
* Rework the OneButton thread to be much less of a mess. (#6997)
* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily
* Update src/input/ButtonThread.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix GPS toggle
* Send the shutdown event, not just the kbchar
* Honor the back button in a notificaiton popup
* Draw the right size box for popup with options
* Try to un-break all the things
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* 24-hour Clock Should have leading zero, but not 12-hour
* Fixup some compile errors
* Add intRoutine to ButtonThread init, to get more responsive user button back
* Add Timezone picker
* Fix Warning
* Optionally set the initial selection for the chooser popup
* Make back buttons work in canned messages
* Drop the wrapper classes
* LonPressTime now configurable
* Clock Frame can not longer be blank; just add valid time
* Back buttons everywhere!
* Key Verification confirm banner
* Make Elecrow M* top button a back button
* Add settings saves
* EInk responsiveness fixes
* Linux Input Fixes
* Add Native Trackball/Joystick support, and move UserButton to Input
* No Flight Stick Mode
* Send input event
* Add Channel Utilization to Device Focused frame
* Don't shift screens when we draw new ones
* Add showOverlayBanner arguments to no-op
* trunk
* Default Native trackball to NC
* Fix crash in simulator mode
* Add longLong button press
* Get the args right
* Adjust Bluetooth Pairing Screen to account for bottom navigation.
* Trackball everywhere, and unPhone buttons
* Remap visionmaster secondary button to TB_UP
* Kill ScanAndSelect
* trunk
* No longer need the canned messages input filter
* All Canned All the time
* Fix stm32 compile error regarding inputBroker
* Unify tft lineheights (#7033)
* Create variable line heights based upon SCREEN_HEIGHT
* Refactor textPositions into method -> getTextPositions
* Update SharedUIDisplay.h
---------
Co-authored-by: Jason P <applewiz@mac.com>
* Adjust top distance for larger displays
* Adjust icon sizes for larger displays
* Fix Paxcounter compile errors after code updates
* Pixel wrangling to make larger screens fit better
* Alert frame has precedence over banner -- for now
* Unify on ALT_BUTTON
* Align AM/PM to the digit, not the segment on larger displays
* Move some global pin defines into configuration.h
* Scaffolding for BMM150 9-axis gyro
* Alt button behavior
* Don't add the blank GPS frames without HAS_GPS
* EVENT_NODEDB_UPDATED has been retired
* Clean out LOG_WARN messages from debugging
* Add dismiss message function
* Minor buttonThread cleanup
* Add BMM150 support
* Clean up last warning from dev
* Simplify bmm150 init return logic
* Add option to reply to messages
* Add minimal menu upon selecting home screen
* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp
* Properly dismiss message
* T-Deck Trackball press is not user button
* Add select on favorite frame to launch cannedMessage DM
* Minor wording change
* Less capital letters
* Fix empty message check, time isn't reliable
* drop dead code
* Make UIRenderer a static class instead of namespace
* Fix the select on favorite
* Check if message is empty early and then 'return'
* Add kb_found, and show the option to launch freetype if appropriate
* Ignore impossible touchscreen touches
* Auto scroll fix
* Move linebreak after "from" for banners to maximize screen usage.
* Center "No messages to show" on Message frame
* Start consolidating buzzer behavior
* Fixed signed / unsigned warning
* Cast second parameter of max() to make some targets happy
* Cast kbchar to (char) to make arduino string happy
* Shorten the notice of "No messages"
* Add buzzer mode chooser
* Add regionPicker to Lora icon
* Reduce line spacing and reorder Position screen to resolve overlapping issues
* Update message titles, fix GPS icons, add Back options
* Leftover boops
* Remove chirp
* Make the region selection dismissable when a region is already set
* Add read-aloud functionality on messages w/ esp8266sam
* "Last Heard" is a better label
* tweak the beep
* 5 options
* properly tear down freetext upon cancel
* de-convelute canned messages just a bit
* Correct height of Mail icon in navigation bar
* Remove unused warning
* Consolidate time methods into TimeFormatters
* Oops
* Change LoRa Picker Cancel to Back
* Tweak selection characters on Banner
* Message render not scrolling on 5th line
* More fixes for message scrolling
* Remove the safety next on text overflow - we found that root cause
* Add pin definitions to fix compilation for obscure target
* Don't let the touchscreen send unitialized kbchar values
* Make virtual KB just a bit quicker
* No more double tap, swipe!
* Left is left, and Right is right
* Update horizontal lightning bolt design
* Move from solid to dashed separator for Message Frame
* Single emote feature fix
* Manually sort overlapping elements for now
* Freetext and clearer choices
* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)
* Remove BaseUI branding
* Capitalization is fun
* Revert Meshtastic Boot Frame Changes
* Add ANZ_433 LoRa region to picker
* Update settings.json
---------
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* chore(seeed_xiao_nrf52840_kit): Use build flag for L76K GNSS, rename variant.h ifdef
Signed-off-by: Andrew Yong <me@ndoo.sg>
* feat(seeed_xiao_nrf52840_kit): Support multiple SX126x pinouts via build flags
Signed-off-by: Andrew Yong <me@ndoo.sg>
* feat(seeed_xiao_nrf52840_kit): Pin D0 as user button if pin is unused
Signed-off-by: Andrew Yong <me@ndoo.sg>
* feat: EBYTE E22 and NiceRF gain and SX1262 max power defines
Signed-off-by: Andrew Yong <me@ndoo.sg>
* chore(xiao_ble): Move variant to DIY and extend from seeed_xiao_nrf52840_kit
Signed-off-by: Andrew Yong <me@ndoo.sg>
* feat(seeed_xiao_nrf52840_kit): Pin D6, D7 as I2C SDA, SCL if pins are unused
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* Update to 1.0.4 release of RAK12035_SoilMoisture
* cleanup
* cool
* .
* ..
* little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500
looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500.
improvements could be made around the configuration of the monitor.
next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity.
* . comments about current limitations and TODOs
* trunk update
* trying to autoformat..
* fix formatting attempt 2
* ..
* ...
* ...
* .
* some corrections and local build success
* correction in temp code
* grr formatting
* cleanup after a few experiments
* remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos.
* update some values in varient for rak wistap
* working out trunk formatting..
* wip
. corrections to other build variants
* .
* protobuffs?
* protobufs?
* Update protobufs ref
* Protobufs ref
* Trunk
* Update RAK12035Sensor.cpp
* Fmt
* comment changes
* dumb mistakes... resolved, actually built and tested.. all good..
* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* . proto submod
* proto
* proto
* merge master
* mabe a fix for GPS pin conflict, waiting on a new gps module to try
* merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035
* .
* .
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* PacketHistory debloat RAM allocations
* Removed FLOOD_EXPIRE_TIME option. We have static buffer now.
* Remove mx_ prefix from recentPackets
* Remember no less than 100 packet not to make reflood hell
* Cleanup
* PacketHistory max no less than 100
* no less than 100 means max of 100 or a given value of course.
* Care to not do duplicate entries. Cleanups.
* Packet History - option to log aging of entries
* Update comments for PACKET_HISTORY_TRACE_AGING and VERBOSE_PACKET_HISTORY definitions
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix serial communication for nugget s3 lora
Without setting `ARDUINO_USB_CDC_ON_BOOT=1` the serial interface on the
nugget s3 lora board does not work.
* Fix nugget s3 lora variant definitions
* Fix position exchange throttling race condition
Separate tracking of position broadcasts vs replies to fix exchange position functionality.
Previously, allocReply() would refuse to send position replies if any position packet
(broadcast or reply) was sent within the last 3 minutes. This caused the exchange
position feature to fail when a device had recently sent a position broadcast.
Changes:
- Add lastSentReply member to track position reply timestamps separately
- Update allocReply() to only throttle based on previous replies, not broadcasts
- This allows position exchange to work even after recent position broadcasts
The fix maintains the 3-minute throttling for replies to prevent spam while allowing
legitimate position exchange functionality to work properly.
* Remove unused lastSentToMesh variable
Variable was no longer used after separating reply throttling logic.
* PacketHistory debloat RAM allocations
* Removed FLOOD_EXPIRE_TIME option. We have static buffer now.
* Remove mx_ prefix from recentPackets
* Remember no less than 100 packet not to make reflood hell
* Cleanup
* PacketHistory max no less than 100
* no less than 100 means max of 100 or a given value of course.
* Care to not do duplicate entries. Cleanups.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update RCWL9620Sensor.cpp
test on rak11310, work very wel now
* Update RCWL9620Sensor.cpp
* Trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* DIY InkHUD variants (ProMicro & T114)
* Fix file encoding
> We’ve detected the file encoding as ISO-8859-1. When you commit changes we will transcode it to UTF-8.
* Update comment justifying trunk suppression
* More low-entropy keys, and don't issue a false warning when changing node name
* CopyPasta Wasn't Tasty
* When the phone sets the publickey size to 0, regenerate right away
* add support for GAT562 Mesh Trial Tracker
* Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER
* Added RAK4630 for led pin 2 (blue)
* Added RAK4630 for led pin 2 (blue) comment
* don't touch src/mesh/NodeDB.cpp
* set fixed baudrate for gat562_mesh_trial_tracker
* adjust the order of the HW_VENDOR defines
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Strip redundant code from E-Ink driver
* Begin polling for E-Ink update completion sooner
In some cases, we might be waiting longer than we need to.
* E-Ink driver for WeAct 1.54" display
Currently identical to the popular GDEY0154D67 model. Kept separate now in case the drivers need to diverge in future.
* Put back code which sets the number of gate lines
* Say issue #6867 about adding validation for long_name and short_name. Firmware should expect at least 1 non-whitespace character for both long_name and short_name. added the USERPREFS_CONFIG_DEVICE_ROLE example to userPrefs.jsonc
* Validation for user long_name and short_name implemented. No longer can use whitespace characters. Return BAD_REQUEST error responses when validation fails and warning logs when validation rejects invalid names.
* Improve whitespace validation for user names with ctype.h, ensure logging works
* Add whitespace validation to ham mode to prevent validation bypass and to match python cli command
* punctuation change
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
The Seeed Xiao NRF52840 Kit's default GPS is an L76K which operates
at 9600 baud, so when this variant was defined that baud rate was
specified.
However, this is a development board and it is expected that users
can attach their own devices. This includes GPS, which may operate
at a different baud rate. The current fixed baud rate prevents this,
so this patch removes that setting.
This will revert to the regular automatic probe method. This will
sucessfully detect the L76K as before (probably the same as before
since 9600 baud is the first baud rate checked), but also allow other
GPSes at other baud rates to be detected.
Fixes https://github.com/meshtastic/firmware/issues/7012
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Don't use assert for Lock
* Don't use assert for MQTT messages
* Split assert in getMacAddr to always run the function
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Wipe keys if low entropy
* Client Notification Payload variant
* Don't call service before it's created
* Lucky Number 14
* Catch for low-entropy keys even before region is set
* Use BLE_LED where present for CONNECTED/DISCONNECTED
* Use WIFI_LED where present for WiFi started/stopped (as AP) or connected/disconnected (as Station)
* improve support for Heltec Wireless Bridge
* satisfy 'trunk fmt'
* Initial support for NomadStar Meteor Pro
* Cleaned up Platformio variant comments
* Removed RTC & ETH deps.
* Removed RGB NCP5623 deps, Enabled AmbientLight by default
* Added HWID mapping
* Updated Armduino-Semihosting lib dep with archived version.
* Fixed trunk linting in AmbientLightingThread.h and hydra variant
Fixed quoting of the `FILENAME` variable to work when the path of the
passed argument contains a space. Also fixed syntactical issues called
out by `shellcheck` in multi-condition `if` statements.
Also normalized indentation chars (was mix of tabs & spaces) and
trailing whitespace.
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Driver for WeAct Studio 2.9" ePaper module
* Clarify that flex connector marking is not a unique id
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* feat: seeed_xiao_nrf52840_kit improvements
- LEDs:
- Change RGB LED to be active low as it is common anode
- Remove re-definition of LED_PIN
- Use red LED to indicate flash writes
- Use blue LED as user LED (External Notification module)
- GPIO: Re-word unused BUTTON_PIN comment
- Wire: Set I2C pins to match XIAO nRF52840 Sense's LSM6DS3TR IMU
- Battery:
- Use charge LED to detect charging state
- Move voltage divider boilerplate out of src/main.cpp and into initVariant()
- Fix dependencies for above in related XIAO BLE DIY variants
Build tested variants:
- seeed_xiao_nrf52840_kit
- xiao_ble
- seeed-xiao-nrf52840-wio-sx1262
Flashed to and tested on hardware:
- seeed_xiao_nrf52840_kit
Signed-off-by: Andrew Yong <me@ndoo.sg>
* chore(seeed_xiao_nrf52840_kit): Re-order generic GPIO definitions
Signed-off-by: Andrew Yong <me@ndoo.sg>
* chore: Use ADC_CTRL for XIAO nRF52840
Signed-off-by: Andrew Yong <me@ndoo.sg>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
* add change-mode support
* add change-mode support
* tab to space
* fix if check
* change param name to 1200bps-reset
* update help section
* missed one in help seciton
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Added full support for LTR390UV readings of UV and Lux
* Trunk formatting
* Added full support for LTR390UV readings of UV and Lux
* Trunk formatting
* fix library check and unnecessary bit resolution change
* fixed log info messages and removed unused dependency
* Hopefully fixes git mess
* fix variable scope and getMetrics returns
* set metrics flags bavk to false in case something wrong happens while reading LTR390UV mode
---------
Co-authored-by: Domingo <domingo@waxman.local>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Coerce user.id to always be derive from the nodenum
* Additionally null it out on send
* Revert "Additionally null it out on send"
This reverts commit 22a2d68723.
* Add LINK32 (Lilygo) Board with Light+Environment sensors
TODO: replace PRIVATE_HW with actual HWID
* Add LINK32 (Lilygo) Board with Light+Environment sensors
TODO: replace PRIVATE_HW with actual HWID
* Update to real HWID and trunk fmt
This is an I2C temperature sensor. It is intended to be a drop-in
compatible sensor for the LM75, however it is more accurate.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
- Rename REGULATORY_GAIN_LORA to TX_GAIN_LORA
- Move gain-based Tx power clamping from RadioInterface::applyModemConfig() to RadioInterface::limitPower()
- User-configured Tx power now matches the Tx power out of the device connector
- Re-order [LoRa Chip]Interface.cpp limitPower() to take place before the final Tx power clamping so we clamp based on the pre-PA Tx power rather than user-configured Tx power
Tested on XIAO BLE variant.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Implement the GDEY0213B74 driver with configuration methods for scanning, waveform, update sequence, and polling for refresh completion. This driver supports both fast and full update types for the 2.13 inch E-Ink display.
Signed-off-by: ChihoSin chihosin@icloud.com
Signed-off-by: ChihoSin chihosin@icloud.com
* Added map report precision bounds
* Log warning
* Precision range should be 12-15
* Missed commit
* Update tests
* That method was renamed
* Removed now-defunct test call
* Remove defunct test
* Custom AdafruitGFX fonts with extended ASCII encodings
* AppletFont handles re-encoding of UTF-8 text
* Manual parsing of text which may contain non-ASCII chars
* Display emoji reactions, even when unprintable
Important to indicate to users that a message has been received, even if meaning is unclear.
* Superstitious shrink_to_fit
I don't think these help, but they're not hurting!
* Use Windows-1252 fonts by default
* Spelling
* Tidy up nicheGraphics.h
* Documentation
* Fix inverted logic
Slipped in during a last minute renaming while tidying up to push..
* Add std::string exec() function to PortduinoGlue for future work
* MVP for HostMetrics module.
* Fix compilation for other targets
* Remove extra debug calls
* Big numbers don't do well as INTs.
* Add HostMetrics to config.yaml
The XIAO NRF kit comes with a hat which has a slightly different pinout than the one supplied with the XIAO S3. At the last update, the RXEN pin was not moved with the rest.
* Add __has_include blocks for sensors
* Put BMP and BME back in the right sensors
* Split environmental_base to environmental_extra, to compile the working sensor libs for Native
* Remove hard-coded checks for ARCH_PORTDUINO
* Un-clobber bmx160
* Move BusIO to environmental_extra due to Armv7 compile error
* Move to forked BusIO for the moment
* Switch to Meshtastic ICM-20948 lib for Portduino support
* Use 20948 for compass direction
* Compass is more than just RAK4631
* Cleanup for 20948 compass
* use Meshtastic branch of 20948 lib
* Check for HAS_SCREEN for showing calibration screen
* No accelerometerThread on STM32
* Erase InkHUD settings on factory reset
* Documentation
* Captialn't
Lower case m. Also move the include statement to .cpp, because it doesn't really need to be in the .h
* udp-multicast: remove the thread from the multicast thread API
The whole API is parallel & asynchronous we don't need to start a thread ourself,
the implementation probably does when we call start listening already.
* Take copilot advice and call it a handler
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading
* add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp
* fix typos, use arduino gpio defines instead of magic numbers
* support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading
* add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp
* fix typos, use arduino gpio defines instead of magic numbers
* RAK4631: add PMSA003I_ENABLE_PIN define
* fix indentation
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* First addition of __has_include for sensor support
* Add __has_include blocks for sensors
* Put BMP and BME back in the right sensors
* Make TelemetrySensor::setup() a pure virtual finction
* Split environmental_base to environmental_extra, to compile the working sensor libs for Native
* Remove hard-coded checks for ARCH_PORTDUINO
* Un-clobber bmx160
* Move BusIO to environmental_extra due to Armv7 compile error
* Move to forked BusIO for the moment
* Enable HAS_SENSOR for Portduino
* Move back to Adafruit BusIO after patch
## 🙏 Thank you for sending in a pull request, here's some tips to get started!
### ❌ (Please delete all these tips and replace them with your text) ❌
- Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
@@ -15,12 +16,12 @@
- If you do not have the affected hardware to test your code changes adequately against regressions, please indicate this, so that contributors and commnunity members can help test your changes.
- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord
## 🤝 Attestations
- [ ] I have tested that my proposed changes behave as described.
- [ ] I have tested that my proposed changes do not cause any obvious regressions on the following devices:
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
