ugh

.devcontainer/Dockerfile

@@ -12,7 +12,6 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     libssl-dev \
     libulfius-dev \
     libyaml-cpp-dev \
-    pipx \
     pkg-config \
     python3 \
     python3-pip \
@@ -22,4 +21,4 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     zip \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
-RUN pipx install platformio==6.1.15
+RUN pip3 install --no-cache-dir -U platformio==6.1.15

.devcontainer/devcontainer.json

@@ -13,13 +13,16 @@
   },
   "customizations": {
     "vscode": {
-      "extensions": ["ms-vscode.cpptools", "platformio.platformio-ide"]
+      "extensions": [
+        "ms-vscode.cpptools",
+        "platformio.platformio-ide",
+      ]
     }
   },
 
   // Use 'forwardPorts' to make a list of ports inside the container available locally.
-  "forwardPorts": [4403],
+  "forwardPorts": [ 4403 ],
 
   // Run commands to prepare the container for use
-  "postCreateCommand": ".devcontainer/setup.sh"
+  "postCreateCommand": ".devcontainer/setup.sh",
 }

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,24 +49,10 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
-        - Heltec Mesh Node T114
-        - Heltec Vision Master E213
-        - Heltec Vision Master E290
-        - Heltec Vision Master T190
-        - Nano G1
-        - Nano G1 Explorer
-        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - Seeed Wio Tracker 1110
-        - Seeed Card Tracker T1000-E
-        - Station G1
-        - Station G2
-        - unPhone
-        - CanaryOne
-        - Chatter
-        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,7 +18,6 @@ body:
         - ESP32
         - RP2040
         - Linux Native
-        - Cross-Platform
         - other
     validations:
       required: true

.github/actions/build-variant/action.yml

@@ -1,94 +0,0 @@
-name: Setup Build Variant Composite Action
-description: Variant build actions for Meshtastic Platform IO steps
-
-inputs:
-  board:
-    description: The board to build for
-    required: true
-  github_token:
-    description: GitHub token
-    required: true
-  build-script-path:
-    description: Path to the build script
-    required: true
-  remove-debug-flags:
-    description: A space separated list of files to remove debug flags from
-    required: false
-    default: ""
-  ota-firmware-source:
-    description: The OTA firmware file to pull
-    required: false
-    default: ""
-  ota-firmware-target:
-    description: The target path to store the OTA firmware file
-    required: false
-    default: ""
-  artifact-paths:
-    description: A newline separated list of paths to store as artifacts
-    required: false
-    default: ""
-  include-web-ui:
-    description: Include the web UI in the build
-    required: false
-    default: "false"
-  arch:
-    description: Processor arch name
-    required: true
-    default: "esp32"
-
-runs:
-  using: composite
-  steps:
-    - name: Build base
-      id: base
-      uses: ./.github/actions/setup-base
-
-    - name: Pull web ui
-      if: inputs.include-web-ui == 'true'
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/web
-        file: build.tar
-        target: build.tar
-        token: ${{ inputs.github_token }}
-
-    - name: Unpack web ui
-      if: inputs.include-web-ui == 'true'
-      shell: bash
-      run: |
-        tar -xf build.tar -C data/static
-        rm build.tar
-
-    - name: Remove debug flags for release
-      shell: bash
-      if: inputs.remove-debug-flags != ''
-      run: |
-        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
-          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
-        done
-
-    - name: Build ${{ inputs.board }}
-      shell: bash
-      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
-
-    - name: Pull OTA Firmware
-      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/firmware-ota
-        file: ${{ inputs.ota-firmware-source }}
-        target: ${{ inputs.ota-firmware-target }}
-        token: ${{ inputs.github_token }}
-
-    - name: Get release version string
-      shell: bash
-      run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-      id: version
-
-    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
-      with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-        overwrite: true
-        path: |
-          ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -11,11 +11,6 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Uncomment build epoch
-      shell: bash
-      run: |
-        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
     - name: Install dependencies
       shell: bash
       run: |

.github/dependabot.yml

@@ -1,26 +0,0 @@
-version: 2
-updates:
-  - package-ecosystem: docker
-    directory: devcontainer
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: docker
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: gitsubmodule
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: github-actions
-    directory: /.github/workflows
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,9 +1,9 @@
-### ❌ (Please delete all these tips and replace them with your text) ❌
-
 ## Thank you for sending in a pull request, here's some tips to get started!
 
+(Please delete all these tips and replace with your text)
+
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
-  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
+  to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
@@ -12,4 +12,3 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
-- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord

.github/workflows/build_esp32.yml

@@ -12,23 +12,52 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
-        id: build
+        run: bin/build-esp32.sh ${{ inputs.board }}
-        uses: ./.github/actions/build-variant
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          repo: meshtastic/firmware-ota
-          board: ${{ inputs.board }}
+          file: firmware.bin
-          remove-debug-flags: >-
+          target: release/bleota.bin
-            ./arch/esp32/esp32.ini
+          token: ${{ secrets.GITHUB_TOKEN }}
-            ./arch/esp32/esp32s2.ini
+
-            ./arch/esp32/esp32s3.ini
+      - name: Get release version string
-            ./arch/esp32/esp32c3.ini
+        shell: bash
-          build-script-path: bin/build-esp32.sh
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          ota-firmware-source: firmware.bin
+        id: version
-          ota-firmware-target: release/bleota.bin
+
-          artifact-paths: |
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -14,22 +14,50 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-C3
+      - name: Pull web ui
-        id: build
+        uses: dsaltares/fetch-gh-release-asset@master
-        uses: ./.github/actions/build-variant
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          repo: meshtastic/web
-          board: ${{ inputs.board }}
+          file: build.tar
-          remove-debug-flags: >-
+          target: build.tar
-            ./arch/esp32/esp32.ini
+          token: ${{ secrets.GITHUB_TOKEN }}
-            ./arch/esp32/esp32s2.ini
+
-            ./arch/esp32/esp32s3.ini
+      - name: Unpack web ui
-            ./arch/esp32/esp32c3.ini
+        run: |
-          build-script-path: bin/build-esp32.sh
+          tar -xf build.tar -C data/static
-          ota-firmware-source: firmware-c3.bin
+          rm build.tar
-          ota-firmware-target: release/bleota-c3.bin
+      - name: Remove debug flags for release
-          artifact-paths: |
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-c3.bin
+          target: release/bleota-c3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -1,36 +0,0 @@
-name: Build ESP32-C6
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c6:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C6
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -12,23 +12,50 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-S3
+      - name: Pull web ui
-        id: build
+        uses: dsaltares/fetch-gh-release-asset@master
-        uses: ./.github/actions/build-variant
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          repo: meshtastic/web
-          board: ${{ inputs.board }}
+          file: build.tar
-          remove-debug-flags: >-
+          target: build.tar
-            ./arch/esp32/esp32.ini
+          token: ${{ secrets.GITHUB_TOKEN }}
-            ./arch/esp32/esp32s2.ini
+
-            ./arch/esp32/esp32s3.ini
+      - name: Unpack web ui
-            ./arch/esp32/esp32c3.ini
+        run: |
-          build-script-path: bin/build-esp32.sh
+          tar -xf build.tar -C data/static
-          ota-firmware-source: firmware-s3.bin
+          rm build.tar
-          ota-firmware-target: release/bleota-s3.bin
+      - name: Remove debug flags for release
-          artifact-paths: |
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32s3

.github/workflows/build_native.yml

@@ -10,7 +10,7 @@ jobs:
   build-native:
     runs-on: ubuntu-latest
     steps:
-      - name: Install libs needed for native build
+      - name: Install libbluetooth
         shell: bash
         run: |
           sudo apt-get update --fix-missing
@@ -67,7 +67,7 @@ jobs:
       - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v6
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./Dockerfile
@@ -77,7 +77,7 @@ jobs:
       - name: Docker build and push
         if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v6
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./Dockerfile

.github/workflows/build_nrf52.yml

@@ -12,17 +12,24 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build NRF52
-        id: build
+        run: bin/build-nrf52.sh ${{ inputs.board }}
-        uses: ./.github/actions/build-variant
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          board: ${{ inputs.board }}
+          overwrite: true
-          build-script-path: bin/build-nrf52.sh
+          path: |
-          artifact-paths: |
             release/*.hex
             release/*.uf2
             release/*.elf
             release/*.zip
-          arch: nrf52840

.github/workflows/build_rpi2040.yml

@@ -12,15 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build Raspberry Pi 2040
-        id: build
+        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
-        uses: ./.github/actions/build-variant
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          board: ${{ inputs.board }}
+          overwrite: true
-          build-script-path: bin/build-rpi2040.sh
+          path: |
-          artifact-paths: |
             release/*.uf2
             release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -12,16 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build STM32WL
+      - name: Build STM32
-        id: build
+        run: bin/build-stm32.sh ${{ inputs.board }}
-        uses: ./.github/actions/build-variant
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-          board: ${{ inputs.board }}
+          overwrite: true
-          build-script-path: bin/build-stm32.sh
+          path: |
-          artifact-paths: |
             release/*.hex
             release/*.bin
-            release/*.elf
-          arch: stm32

.github/workflows/generate-userprefs.yml

@@ -1,35 +0,0 @@
-name: Generate UsersPrefs JSON manifest
-
-on:
-  push:
-    paths:
-      - userPrefs.h
-    branches:
-      - master
-
-jobs:
-  generate-userprefs:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-
-      - name: Install Clang
-        run: sudo apt-get install -y clang
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Generate userPrefs.jsom
-        run: python3 ./bin/build-userprefs-json.py
-
-      - name: Trunk format json
-        run: trunk format userPrefs.json
-
-      - name: Commit userPrefs.json
-        run: |
-          git config --global user.email "actions@github.com"
-          git config --global user.name "GitHub Actions"
-          git add userPrefs.json
-          git commit -m "Update userPrefs.json"
-          git push

.github/workflows/main_matrix.yml

@@ -1,7 +1,7 @@
 name: CI
-concurrency:
+#concurrency:
-  group: ci-${{ github.head_ref || github.run_id }}
+#  group: ${{ github.ref }}
-  cancel-in-progress: true
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -24,7 +24,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, stm32, check]
     runs-on: ubuntu-latest
     steps:
       - id: checkout
@@ -32,18 +32,13 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "${{ github.head_ref }}" == "" ]]; then
           TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
+          echo "$TARGETS"
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
-          fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} Head: ${{ github.head_ref }} Ref: ${{ github.ref }} Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
       esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
       esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
@@ -56,7 +51,6 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
       - uses: actions/checkout@v4
       - name: Build base
@@ -92,15 +86,6 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
-  build-esp32-c6:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_esp32_c6.yml
-    with:
-      board: ${{ matrix.board }}
-
   build-nrf52:
     needs: setup
     strategy:
@@ -139,7 +124,6 @@ jobs:
 
   after-checks:
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [check]
     steps:
       - name: Checkout code
@@ -152,20 +136,18 @@ jobs:
     permissions:
       contents: write
       pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
         build-esp32,
         build-esp32-s3,
         build-esp32-c3,
-        build-esp32-c6,
         build-nrf52,
         build-rpi2040,
         build-stm32,
+        package-raspbian,
+        package-raspbian-armv7l,
+        package-native,
       ]
     steps:
       - name: Checkout code
@@ -177,7 +159,6 @@ jobs:
       - uses: actions/download-artifact@v4
         with:
           path: ./
-          pattern: firmware-${{matrix.arch}}-*
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -188,12 +169,12 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{ steps.version.outputs.version }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -202,14 +183,16 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
+            ./meshtasticd_linux_*
+            ./config-dist.yaml
             ./littlefs-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
+          retention-days: 90
 
       - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{ steps.version.outputs.version }}
           merge-multiple: true
           path: ./output
 
@@ -223,34 +206,32 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
-      - uses: scruplelesswizard/comment-artifact@main
+      - name: Create request artifacts
-        if: ${{ github.event_name == 'pull_request' }}
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
+        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+        uses: gavv/pull-request-artifacts@v2.1.0
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
-          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip. This artifact will be available for 90 days from creation"
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          github-token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          artifacts-repo: meshtastic/artifacts
+          artifacts-branch: device
+          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
 
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
+    needs: [gather-artifacts, after-checks]
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs: [
-        gather-artifacts,
-        package-raspbian,
-        package-raspbian-armv7l,
-        package-native,
-      ]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -264,6 +245,42 @@ jobs:
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
+      - uses: actions/download-artifact@v4
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
+          path: ./output
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
+
+      - uses: actions/download-artifact@v4
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip Elfs
+        run: zip -j -9 -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
       - name: Create release
         uses: actions/create-release@v1
         id: create_release
@@ -277,16 +294,25 @@ jobs:
         env:
           GITHUB_TOKEN: ${{ github.token }}
 
-      - name: Download deb files
+      - name: Add bins to release
-        uses: actions/download-artifact@v4
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
         with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          merge-multiple: true
+          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
-          path: ./output
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
 
-      # For diagnostics
+      - name: Add debug elfs to release
-      - name: Display structure of downloaded files
+        uses: actions/upload-release-asset@v1
-        run: ls -lR
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
 
       - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
@@ -323,79 +349,7 @@ jobs:
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v6
         with:
-          title: Bump version.properties
           add-paths: |
             version.properties
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
-
-      - uses: actions/download-artifact@v4
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
-
-      - name: Add debug elfs to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-native
     steps:
       - name: Checkout code

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian
     steps:
       - name: Checkout code

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code

.github/workflows/sec_sast_semgrep_cron.yml

@@ -12,7 +12,7 @@ jobs:
   semgrep-full:
     runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,9 +4,9 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/test_simulator.yml

@@ -1,4 +1,4 @@
-name: End to end tests
+name: Test Simulator
 
 on:
   schedule:
@@ -55,52 +55,3 @@ jobs:
           name: PlatformIO Tests
           path: testreport.xml
           reporter: java-junit
-
-  hardware-tests:
-    runs-on: test-runner
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-
-      # - uses: actions/setup-python@v5
-      #   with:
-      #     python-version: '3.10'
-
-      # pipx install "setuptools<72"
-      - name: Upgrade python tools
-        shell: bash
-        run: |
-          pipx install adafruit-nrfutil
-          pipx install poetry
-          pipx install meshtastic --pip-args=--pre
-
-      - name: Install PlatformIO from script
-        shell: bash
-        run: |
-          curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
-          python3 get-platformio.py
-
-      - name: Upgrade platformio
-        shell: bash
-        run: |
-          export PATH=$PATH:$HOME/.local/bin
-          pio upgrade
-
-      - name: Setup Node
-        uses: actions/setup-node@v4
-        with:
-          node-version: 18
-
-      - name: Setup pnpm
-        uses: pnpm/action-setup@v4
-        with:
-          version: latest
-
-      - name: Install dependencies, setup devices and run
-        shell: bash
-        run: |
-          git submodule update --init --recursive
-          cd meshtestic/
-          pnpm install
-          pnpm run setup
-          pnpm run test

.github/workflows/update_protobufs.yml

@@ -1,4 +1,4 @@
-name: Update protobufs and regenerate classes
+name: "Update protobufs and regenerate classes"
 on: workflow_dispatch
 
 jobs:
@@ -17,18 +17,17 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9-linux-x86.tar.gz
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.9-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
-          mv nanopb-0.4.9-linux-x86 nanopb-0.4.9
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
 
       - name: Re-generate protocol buffers
         run: |
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v6
         with:
-          title: Update protobufs and classes
           add-paths: |
             protobufs
             src/mesh

.gitignore

@@ -1,4 +1,6 @@
 .pio
+main/configuration.h
+main/credentials.h
 
 # ignore vscode IDE settings files
 .vscode/*

.gitmodules

@@ -1,6 +1,3 @@
 [submodule "protobufs"]
 	path = protobufs
 	url = https://github.com/meshtastic/protobufs.git
-[submodule "meshtestic"]
-	path = meshtestic
-	url = https://github.com/meshtastic/meshTestic

.trunk/trunk.yaml

@@ -1,36 +1,36 @@
 version: 0.1
 cli:
-  version: 1.22.6
+  version: 1.22.2
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.3
+      ref: v1.5.0
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.82.6
+    - trufflehog@3.76.3
     - yamllint@1.35.1
-    - bandit@1.7.10
+    - bandit@1.7.8
-    - checkov@3.2.256
+    - checkov@3.2.95
     - terrascan@1.19.1
-    - trivy@0.55.2
+    - trivy@0.51.1
     #- trufflehog@3.63.2-rc0
-    - taplo@0.9.3
+    - taplo@0.8.1
-    - ruff@0.6.8
+    - ruff@0.4.4
     - isort@5.13.2
-    - markdownlint@0.42.0
+    - markdownlint@0.40.0
-    - oxipng@9.1.2
+    - oxipng@9.1.1
     - svgo@3.3.2
-    - actionlint@1.7.3
+    - actionlint@1.7.0
-    - flake8@7.1.1
+    - flake8@7.0.0
     - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.8.0
+    - black@24.4.2
     - git-diff-check
-    - gitleaks@8.20.0
+    - gitleaks@8.18.2
     - clang-format@16.0.3
-    - prettier@3.3.3
+    - prettier@3.2.5
   ignore:
     - linters: [ALL]
       paths:

.vscode/extensions.json

@@ -2,9 +2,8 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-        "platformio.platformio-ide"
+		"ms-vscode.cpptools",
+        "platformio.platformio-ide",
+        "trunk.io"
     ],
-    "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
-    ]
 }

CONTRIBUTING.md

@@ -1,47 +0,0 @@
-# Contributing to Meshtastic Firmware
-
-We're excited that you're interested in contributing to the Meshtastic firmware! This document provides a high-level overview of how you can get involved.
-
-## Important First Steps
-
-Before you begin, please:
-
-1. **Read our documentation**: Our [official documentation](https://meshtastic.org/docs/) is a crucial resource. It contains essential information about the project.
-
-2. **Check out the firmware build guide**: For specific instructions on setting up your development environment and building the firmware, refer to our [Firmware Build Guide](https://meshtastic.org/docs/development/firmware/build/).
-
-3. Read our [Code of Conduct](https://meshtastic.org/docs/legal/conduct/)
-
-4. Join our [Discord community](https://discord.com/invite/ktMAKGBnBs) to connect with developers and other contributors to get help.
-
-## Getting Help and Discussing Ideas
-
-We encourage open communication and discussion before diving into code changes:
-
-1. **Use GitHub Discussions**: For new ideas, questions, or to discuss potential changes, start a conversation in our [GitHub Discussions](https://github.com/meshtastic/firmware/discussions) first. This helps us collaborate and avoid duplicate work.
-
-2. **Join our Discord**: For real-time chat and quick questions, join our [Discord server](https://discord.com/invite/ktMAKGBnBs). It's a great place to get help and connect with other developers and the community.
-
-3. **Reporting Issues**: If you've identified a bug, please use our bug report template when creating a new issue in the [issue tracker](https://github.com/meshtastic/firmware/issues). Ensure you've searched existing issues to avoid duplicates.
-
-## Making Contributions
-
-> [!IMPORTANT]
-> Before making any contributions, you must sign our Contributor License Agreement (CLA). You can do this by visiting https://cla-assistant.io/meshtastic/firmware. Be sure to use the GitHub account you will use to submit your contributions when signing.
-
-1. Fork the repository
-2. Create a new branch for your feature or bug fix
-3. Make your changes
-4. Test your changes thoroughly
-5. Create a pull request with a clear description, using the provided template, of your changes. Be sure to enable "Allow edits from maintainers".
-
-## Coding Standards
-
-To ensure consistent code formatting across the project:
-
-1. Install the [Trunk](https://marketplace.visualstudio.com/items?itemName=Trunk.io) extension for Visual Studio Code.
-2. Before submitting your changes, run `trunk fmt` to automatically format your code according to our standards.
-
-Adhering to these formatting guidelines helps maintain code consistency and makes the review process smoother.
-
-Thank you for contributing to Meshtastic!

SECURITY.md

@@ -1,12 +0,0 @@
-# Security Policy
-
-## Supported Versions
-
-| Firmware Version | Supported          |
-| ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
-
-## Reporting a Vulnerability
-
-We support the private reporting of potential security vulnerabilities. Please go to the Security tab to file a report with a description of the potential vulnerability and reproduction scripts (preferred) or steps, and our developers will review.

arch/esp32/esp32.ini

@@ -2,10 +2,10 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.9.0
+platform = platformio/espressif32@6.7.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -46,7 +46,7 @@ lib_deps =
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.2
   https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
-  lewisxhe/XPowersLib@^0.2.6
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
   rweather/Crypto@^0.4.0
 

arch/esp32/esp32c6.ini

@@ -1,40 +0,0 @@
-[esp32c6_base]
-extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
-build_flags =
-  ${arduino_base.build_flags}
-  -Wall
-  -Wextra
-  -Isrc/platform/esp32
-  -std=c++11
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DSERIAL_BUFFER_SIZE=4096
-  -DLIBPAX_ARDUINO
-  -DLIBPAX_WIFI
-  -DLIBPAX_BLE
-  -DMESHTASTIC_EXCLUDE_WEBSERVER
-  ;-DDEBUG_HEAP
-  ; TEMP
-  -DHAS_BLUETOOTH=0
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  lewisxhe/XPowersLib@^0.2.6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
-
-build_src_filter = 
- ${esp32_base.build_src_filter} -<mesh/http> 
-
-monitor_speed = 460800
-monitor_filters = esp32_c3_exception_decoder
-
-lib_ignore =
-  NonBlockingRTTTL
-  NimBLE-Arduino
-  libpax
-  

arch/nrf52/nrf52.ini

@@ -16,7 +16,7 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#6b3796d697481c8f6e3f4aa5c111bd9979f29e64
+platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
 framework = arduino
 
 build_src_filter = 
@@ -9,7 +9,7 @@ build_src_filter =
   -<nimble/> 
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
-  -<platform/rp2xx0>
+  -<platform/rp2040>
   -<mesh/wifi/>
   -<mesh/http/>
   +<mesh/raspihttp/>
@@ -24,7 +24,7 @@ lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-  lovyan03/LovyanGFX@^1.1.16
+  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
 
 build_flags =
   ${arduino_base.build_flags}

arch/rp2040/rp2040.ini

@@ -1,14 +1,14 @@
 ; Common settings for rp2040 Processor based targets
-[rp2350_base]
+[rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9e55f6db5c56b9867c69fe473f388beea4546672
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#a6ab6e1f95bc1428d667d55ea7173c0744acc03c ; 4.0.2+
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/platform/rp2xx0
+  -Isrc/platform/rp2040
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 

arch/rp2xx0/rp2040.ini

@@ -1,25 +0,0 @@
-; Common settings for rp2040 Processor based targets
-[rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#v1.2.0-gcc12
-extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.0.3
-
-board_build.core = earlephilhower
-board_build.filesystem_size = 0.5m
-build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
-  -Isrc/platform/rp2xx0
-  -Isrc/platform/rp2xx0/hardware_rosc/include
-  -Isrc/platform/rp2xx0/pico_sleep/include
-  -D__PLAT_RP2040__
-#  -D _POSIX_THREADS
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
-
-lib_ignore =
-  BluetoothOTA
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${environmental_base.lib_deps}
-  rweather/Crypto

arch/stm32/stm32.ini

@@ -1,7 +1,7 @@
 [stm32_base]
 extends = arduino_base
 platform = ststm32
-platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#ea74156acd823b6d14739f389e6cdc648f8ee36e
+platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#361a7fdb67e2a7104e99b4f42a802469eef8b129
 
 build_type = release
 
@@ -22,7 +22,7 @@ build_flags =
   -fdata-sections
   
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
@@ -33,5 +33,5 @@ lib_deps =
   https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
-  mathertel/OneButton@~2.6.1
+  https://github.com/mathertel/OneButton@~2.6.1
   Wire

bin/build-nrf52.sh

@@ -46,8 +46,3 @@ else
 	cp bin/device-update.* $OUTDIR
 	cp bin/*.uf2 $OUTDIR
 fi
-
-if (echo $1 | grep -q "rak4631"); then
-	echo "Copying hex file"
-	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
-fi

bin/build-userprefs-json.py

@@ -1,48 +0,0 @@
-import json
-import subprocess
-import re
-
-def get_macros_from_header(header_file):
-    # Run clang to preprocess the header file and capture the output
-    result = subprocess.run(['clang', '-E', '-dM', header_file], capture_output=True, text=True)
-    if result.returncode != 0:
-        raise RuntimeError(f"Clang preprocessing failed: {result.stderr}")
-
-    # Extract macros from the output
-    macros = {}
-    macro_pattern = re.compile(r'#define\s+(\w+)\s+(.*)')
-    for line in result.stdout.splitlines():
-        match = macro_pattern.match(line) 
-        if match and 'USERPREFS_' in line and '_USERPREFS_' not in line:
-            macros[match.group(1)] = match.group(2)
-
-    return macros
-
-def write_macros_to_json(macros, output_file):
-    with open(output_file, 'w') as f:
-        json.dump(macros, f, indent=4)
-
-def main():
-    header_file = 'userPrefs.h'
-    output_file = 'userPrefs.json'
-    # Uncomment all macros in the header file
-    with open(header_file, 'r') as file:
-        lines = file.readlines()
-
-    uncommented_lines = []
-    for line in lines:
-        stripped_line = line.strip().replace('/*', '').replace('*/', '')
-        if stripped_line.startswith('//') and 'USERPREFS_' in stripped_line:
-            # Replace "//"
-            stripped_line = stripped_line.replace('//', '')
-        uncommented_lines.append(stripped_line + '\n')
-
-    with open(header_file, 'w') as file:
-        for line in uncommented_lines:
-                file.write(line)
-    macros = get_macros_from_header(header_file)
-    write_macros_to_json(macros, output_file)
-    print(f"Macros have been written to {output_file}")
-
-if __name__ == "__main__":
-    main()

bin/config-dist.yaml

@@ -9,7 +9,6 @@ Lora:
 #  IRQ: 16
 #  Busy: 20
 #  Reset: 18
-#  SX126X_ANT_SW: 6
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7

bin/generate_ci_matrix.py

@@ -6,7 +6,6 @@ import configparser
 import json
 import os
 import sys
-import random
 
 rootdir = "variants/"
 
@@ -40,7 +39,5 @@ for subdir, dirs, files in os.walk(rootdir):
                             "check" in options
                         ):
                             outlist.append(section)
-if ("quick" in options) & (len(outlist) > 3):
+
-    print(json.dumps(random.sample(outlist, 3)))
+print(json.dumps(outlist))
-else:
-    print(json.dumps(outlist))

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,10 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.9 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.9"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.9/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

boards/CDEBYTE_EoRa-S3.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "CDEBYTE_EoRa-S3"
   },
-  "connectivity": ["wifi", "bluetooth"],
+  "connectivity": ["wifi"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/ESP32-S3-WROOM-1-N4.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "ESP32-S3-WROOM-1-N4"
   },
-  "connectivity": ["wifi", "bluetooth"],
+  "connectivity": ["wifi"],
   "debug": {
     "default_tool": "esp-builtin",
     "onboard_tools": ["esp-builtin"],

boards/heltec_mesh_node_t114.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],

boards/lora-relay-v1.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V1 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora-relay-v2.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V2 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v2",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora_isp4520.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52832_s132_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52832_XXAA -DNRF52",
+    "f_cpu": "64000000L",
+    "mcu": "nrf52832",
+    "variant": "lora_isp4520",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS132",
+      "sd_name": "s132",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B7"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52832_xxAA",
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "lora ISP4520",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 524288,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
+  },
+  "url": "",
+  "vendor": "PsiSoft"
+}

boards/me25ls01-4y10td.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DME25LS01_4Y10TD -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/ms24sf1.json

@@ -1,58 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "nrf52840_s140_v7.ld"
-    },
-    "core": "nRF5",
-    "cpu": "cortex-m4",
-    "extra_flags": "-DMS24SF1 -DNRF52840_XXAA",
-    "f_cpu": "64000000L",
-    "hwids": [
-      ["0x239A", "0x8029"],
-      ["0x239A", "0x0029"],
-      ["0x239A", "0x002A"],
-      ["0x239A", "0x802A"]
-    ],
-    "usb_product": "MS24SF1-BOOT",
-    "mcu": "nrf52840",
-    "variant": "MINEWSEMI_MS24SF1_SX1262",
-    "bsp": {
-      "name": "adafruit"
-    },
-    "softdevice": {
-      "sd_flags": "-DS140",
-      "sd_name": "s140",
-      "sd_version": "7.3.0",
-      "sd_fwid": "0x0123"
-    },
-    "bootloader": {
-      "settings_addr": "0xFF000"
-    }
-  },
-  "connectivity": ["bluetooth"],
-  "debug": {
-    "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
-  },
-  "frameworks": ["arduino"],
-  "name": "MINEWSEMI_MS24SF1_SX1262",
-  "upload": {
-    "maximum_ram_size": 248832,
-    "maximum_size": 815104,
-    "speed": 115200,
-    "protocol": "nrfutil",
-    "protocols": [
-      "jlink",
-      "nrfjprog",
-      "nrfutil",
-      "stlink",
-      "cmsis-dap",
-      "blackmagic"
-    ],
-    "use_1200bps_touch": true,
-    "require_upload_port": true,
-    "wait_for_upload_port": true
-  },
-  "url": "https://en.minewsemi.com/lora-module/nrf52840-sx1262-ms24sf1",
-  "vendor": "Minesemi"
-}

boards/nordic_pca10059.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DNORDIC_PCA10059 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nrf52840_dk_modified.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "nrf52840dk",
+    "mcu": "nrf52840",
+    "variant": "pca10056-rc-clock",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Nordic Semi"
+}

boards/ppr.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PPR -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4403"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52840",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/ppr1.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52833_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52833_PPR -DNRF52833_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52833",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS113",
+      "sd_name": "s113",
+      "sd_version": "7.2.0",
+      "sd_fwid": "0x00b6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52833_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52833.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/seeed-sensecap-indicator.json

@@ -1,42 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x1A86", "0x7523"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3r8"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino"],
-  "name": "Seeed Studio SenseCAP Indicator",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 8388608,
-    "require_upload_port": true,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",
-  "vendor": "Seeed Studio"
-}

boards/seeed-xiao-s3.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x2886", "0x0059"]],
-    "mcu": "esp32s3",
-    "variant": "seeed-xiao-s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "seeed-xiao-s3",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 8388608,
-    "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html",
-  "vendor": "Seeed Studio"
-}

boards/tlora-t3s3-v1.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "tlora-t3s3-v1"
   },
-  "connectivity": ["wifi", "bluetooth"],
+  "connectivity": ["wifi"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

images/face-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M9 11.75a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5m6 0a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2m0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37a9.97 9.97 0 0 0 10.41 3.97c.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8"/><path fill="none" d="M0 0h24v24H0z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M9 11.75c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zm6 0c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zM12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37C11.07 8.33 14.05 10 17.42 10c.78 0 1.53-.09 2.25-.26.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8z"/><path d="M0 0h24v24H0z" fill="none"/></svg>

images/location_searching-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path fill="none" d="M0 0h24v24H0z"/><path d="M20.94 11A8.994 8.994 0 0 0 13 3.06V1h-2v2.06A8.994 8.994 0 0 0 3.06 11H1v2h2.06A8.994 8.994 0 0 0 11 20.94V23h2v-2.06A8.994 8.994 0 0 0 20.94 13H23v-2zM12 19c-3.87 0-7-3.13-7-7s3.13-7 7-7 7 3.13 7 7-3.13 7-7 7"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M0 0h24v24H0z" fill="none"/><path d="M20.94 11c-.46-4.17-3.77-7.48-7.94-7.94V1h-2v2.06C6.83 3.52 3.52 6.83 3.06 11H1v2h2.06c.46 4.17 3.77 7.48 7.94 7.94V23h2v-2.06c4.17-.46 7.48-3.77 7.94-7.94H23v-2h-2.06zM12 19c-3.87 0-7-3.13-7-7s3.13-7 7-7 7 3.13 7 7-3.13 7-7 7z"/></svg>

images/room-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M12 2C8.13 2 5 5.13 5 9c0 5.25 7 13 7 13s7-7.75 7-13c0-3.87-3.13-7-7-7m0 9.5a2.5 2.5 0 0 1 0-5 2.5 2.5 0 0 1 0 5"/><path fill="none" d="M0 0h24v24H0z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M12 2C8.13 2 5 5.13 5 9c0 5.25 7 13 7 13s7-7.75 7-13c0-3.87-3.13-7-7-7zm0 9.5c-1.38 0-2.5-1.12-2.5-2.5s1.12-2.5 2.5-2.5 2.5 1.12 2.5 2.5-1.12 2.5-2.5 2.5z"/><path d="M0 0h24v24H0z" fill="none"/></svg>

images/textsms-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M20 2H4c-1.1 0-1.99.9-1.99 2L2 22l4-4h14c1.1 0 2-.9 2-2V4c0-1.1-.9-2-2-2M9 11H7V9h2zm4 0h-2V9h2zm4 0h-2V9h2z"/><path fill="none" d="M0 0h24v24H0z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M20 2H4c-1.1 0-1.99.9-1.99 2L2 22l4-4h14c1.1 0 2-.9 2-2V4c0-1.1-.9-2-2-2zM9 11H7V9h2v2zm4 0h-2V9h2v2zm4 0h-2V9h2v2z"/><path d="M0 0h24v24H0z" fill="none"/></svg>

platformio.ini

@@ -17,9 +17,11 @@ default_envs = tbeam
 ;default_envs = tlora-v2-1-1_6
 ;default_envs = tlora-v2-1-1_6-tcxo
 ;default_envs = tlora-t3s3-v1
+;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
 ;default_envs = canaryone
-;default_envs = native
+;default_envs = nrf52840dk-geeksville
+;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 ;default_envs = nano-g1
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
@@ -27,7 +29,6 @@ default_envs = tbeam
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
-;default_envs = rak4631_eth_gw
 ;default_envs = rak2560
 ;default_envs = rak10701
 ;default_envs = wio-e5
@@ -59,42 +60,39 @@ build_flags = -Wno-missing-field-initializers
   -DUSE_THREAD_NAMES
   -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
   -DPB_ENABLE_MALLOC=1
-  -DRADIOLIB_EXCLUDE_CC1101=1
+  -DRADIOLIB_EXCLUDE_CC1101
-  -DRADIOLIB_EXCLUDE_NRF24=1
+  -DRADIOLIB_EXCLUDE_NRF24
-  -DRADIOLIB_EXCLUDE_RF69=1
+  -DRADIOLIB_EXCLUDE_RF69
-  -DRADIOLIB_EXCLUDE_SX1231=1
+  -DRADIOLIB_EXCLUDE_SX1231
-  -DRADIOLIB_EXCLUDE_SX1233=1
+  -DRADIOLIB_EXCLUDE_SX1233
-  -DRADIOLIB_EXCLUDE_SI443X=1
+  -DRADIOLIB_EXCLUDE_SI443X
-  -DRADIOLIB_EXCLUDE_RFM2X=1
+  -DRADIOLIB_EXCLUDE_RFM2X
-  -DRADIOLIB_EXCLUDE_AFSK=1
+  -DRADIOLIB_EXCLUDE_AFSK
-  -DRADIOLIB_EXCLUDE_BELL=1
+  -DRADIOLIB_EXCLUDE_BELL
-  -DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
+  -DRADIOLIB_EXCLUDE_HELLSCHREIBER
-  -DRADIOLIB_EXCLUDE_MORSE=1
+  -DRADIOLIB_EXCLUDE_MORSE
-  -DRADIOLIB_EXCLUDE_RTTY=1
+  -DRADIOLIB_EXCLUDE_RTTY
-  -DRADIOLIB_EXCLUDE_SSTV=1
+  -DRADIOLIB_EXCLUDE_SSTV
-  -DRADIOLIB_EXCLUDE_AX25=1
+  -DRADIOLIB_EXCLUDE_AX25
-  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
+  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
-  -DRADIOLIB_EXCLUDE_BELL=1
+  -DRADIOLIB_EXCLUDE_BELL
-  -DRADIOLIB_EXCLUDE_PAGER=1
+  -DRADIOLIB_EXCLUDE_PAGER
-  -DRADIOLIB_EXCLUDE_FSK4=1
+  -DRADIOLIB_EXCLUDE_FSK4
-  -DRADIOLIB_EXCLUDE_APRS=1
+  -DRADIOLIB_EXCLUDE_APRS
-  -DRADIOLIB_EXCLUDE_LORAWAN=1
+  -DRADIOLIB_EXCLUDE_LORAWAN
   -DMESHTASTIC_EXCLUDE_DROPZONE=1
-  -DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
-  #-DBUILD_EPOCH=$UNIX_TIME
-  ;-D OLED_PL
 
 monitor_speed = 115200
 monitor_filters = direct
 
 lib_deps =
-  jgromes/RadioLib@~7.0.2
+  jgromes/RadioLib@~6.6.0
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306
-  mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
+  https://github.com/mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
   https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
   https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
-  nanopb/Nanopb@^0.4.9
+  nanopb/Nanopb@^0.4.8
   erriez/ErriezCRC32@^1.0.1
 
 ; Used for the code analysis in PIO Home / Inspect
@@ -127,40 +125,36 @@ lib_deps =
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-  adafruit/Adafruit BusIO@^1.16.1
+  adafruit/Adafruit BusIO@^1.15.0
   adafruit/Adafruit Unified Sensor@^1.1.11
   adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BMP085 Library@^1.2.4
   adafruit/Adafruit BME280 Library@^2.2.2
-  adafruit/Adafruit BMP3XX Library@^2.1.5
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
-  adafruit/Adafruit MAX1704X@^1.0.3
   adafruit/Adafruit SHTC3 Library@^1.0.0
   adafruit/Adafruit LPS2X@^2.0.4
   adafruit/Adafruit SHT31 Library@^2.2.2
-  adafruit/Adafruit PM25 AQI Sensor@^1.1.1
+  adafruit/Adafruit PM25 AQI Sensor@^1.0.6
   adafruit/Adafruit MPU6050@^2.2.4
-  adafruit/Adafruit LIS3DH@^1.3.0
+  adafruit/Adafruit LIS3DH@^1.2.4
   adafruit/Adafruit AHTX0@^2.0.5
   adafruit/Adafruit LSM6DS@^4.7.2
   adafruit/Adafruit VEML7700 Library@^2.1.6
   adafruit/Adafruit SHT4x Library@^1.0.4
   adafruit/Adafruit TSL2591 Library@^1.4.5
   sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@^1.0.5
-  sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@^1.2.13
   ClosedCube OPT3001@^1.1.2
   emotibit/EmotiBit MLX90632@^1.0.8
   dfrobot/DFRobot_RTU@^1.0.3
-  sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@^1.1.2
+
-  adafruit/Adafruit MLX90614 Library@^2.1.5
 
   https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
   boschsensortec/BME68x Sensor Library@^1.1.40407
-  https://github.com/KodinLanewave/INA3221@^1.0.1
+  https://github.com/KodinLanewave/INA3221@^1.0.0
-  lewisxhe/SensorLib@0.2.0
+  lewisxhe/SensorLib@^0.2.0
   mprograms/QMC5883LCompass@^1.2.0
   
-  https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d
+
-  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1
+  https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee

src/AccelerometerThread.h

@@ -0,0 +1,297 @@
+#pragma once
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "main.h"
+#include "power.h"
+
+#include <Adafruit_LIS3DH.h>
+#include <Adafruit_LSM6DS3TRC.h>
+#include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <SensorBMA423.hpp>
+#include <Wire.h>
+#ifdef RAK_4631
+#include "Fusion/Fusion.h"
+#include "graphics/Screen.h"
+#include "graphics/ScreenFonts.h"
+#include <Rak_BMX160.h>
+#endif
+
+#define ACCELEROMETER_CHECK_INTERVAL_MS 100
+#define ACCELEROMETER_CLICK_THRESHOLD 40
+
+static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+static inline int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
+class AccelerometerThread : public concurrency::OSThread
+{
+  public:
+    explicit AccelerometerThread(ScanI2C::DeviceType type) : OSThread("AccelerometerThread")
+    {
+        if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
+            LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
+            disable();
+            return;
+        }
+        acceleremoter_type = type;
+#ifndef RAK_4631
+        if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
+            LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
+            disable();
+            return;
+        }
+#endif
+        init();
+    }
+
+    void start()
+    {
+        init();
+        setIntervalFromNow(0);
+    };
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+            wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+            uint8_t click = lis.getClick();
+            if (!config.device.double_tap_as_button_press) {
+                wakeScreen();
+            }
+
+            if (config.device.double_tap_as_button_press && (click & 0x20)) {
+                buttonPress();
+                return 500;
+            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.readIrqStatus() != DEV_WIRE_NONE) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleTap()) {
+                wakeScreen();
+                return 500;
+            }
+#ifdef RAK_4631
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMX160) {
+            sBmx160SensorData_t magAccel;
+            sBmx160SensorData_t gAccel;
+
+            /* Get a new sensor event */
+            bmx160.getAllData(&magAccel, NULL, &gAccel);
+
+            // expirimental calibrate routine. Limited to between 10 and 30 seconds after boot
+            if (millis() > 12 * 1000 && millis() < 30 * 1000) {
+                if (!showingScreen) {
+                    showingScreen = true;
+                    screen->startAlert((FrameCallback)drawFrameCalibration);
+                }
+                if (magAccel.x > highestX)
+                    highestX = magAccel.x;
+                if (magAccel.x < lowestX)
+                    lowestX = magAccel.x;
+                if (magAccel.y > highestY)
+                    highestY = magAccel.y;
+                if (magAccel.y < lowestY)
+                    lowestY = magAccel.y;
+                if (magAccel.z > highestZ)
+                    highestZ = magAccel.z;
+                if (magAccel.z < lowestZ)
+                    lowestZ = magAccel.z;
+            } else if (showingScreen && millis() >= 30 * 1000) {
+                showingScreen = false;
+                screen->endAlert();
+            }
+
+            int highestRealX = highestX - (highestX + lowestX) / 2;
+
+            magAccel.x -= (highestX + lowestX) / 2;
+            magAccel.y -= (highestY + lowestY) / 2;
+            magAccel.z -= (highestZ + lowestZ) / 2;
+            FusionVector ga, ma;
+            ga.axis.x = -gAccel.x; // default location for the BMX160 is on the rear of the board
+            ga.axis.y = -gAccel.y;
+            ga.axis.z = gAccel.z;
+            ma.axis.x = -magAccel.x;
+            ma.axis.y = -magAccel.y;
+            ma.axis.z = magAccel.z * 3;
+
+            // If we're set to one of the inverted positions
+            if (config.display.compass_orientation > meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270) {
+                ma = FusionAxesSwap(ma, FusionAxesAlignmentNXNYPZ);
+                ga = FusionAxesSwap(ga, FusionAxesAlignmentNXNYPZ);
+            }
+
+            float heading = FusionCompassCalculateHeading(FusionConventionNed, ga, ma);
+
+            switch (config.display.compass_orientation) {
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0_INVERTED:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0:
+                break;
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90_INVERTED:
+                heading += 90;
+                break;
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180_INVERTED:
+                heading += 180;
+                break;
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED:
+                heading += 270;
+                break;
+            }
+
+            screen->setHeading(heading);
+
+#endif
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.shake()) {
+            wakeScreen();
+            return 500;
+        }
+
+        return ACCELEROMETER_CHECK_INTERVAL_MS;
+    }
+
+  private:
+    void init()
+    {
+        LOG_DEBUG("AccelerometerThread initializing\n");
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+            LOG_DEBUG("MPU6050 initializing\n");
+            // setup motion detection
+            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
+            mpu.setMotionDetectionThreshold(1);
+            mpu.setMotionDetectionDuration(20);
+            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
+            mpu.setInterruptPinPolarity(true);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+            LOG_DEBUG("LIS3DH initializing\n");
+            lis.setRange(LIS3DH_RANGE_2_G);
+            // Adjust threshold, higher numbers are less sensitive
+            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 &&
+                   bmaSensor.begin(accelerometer_found.address, &readRegister, &writeRegister)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            bmaSensor.configAccelerometer(bmaSensor.RANGE_2G, bmaSensor.ODR_100HZ, bmaSensor.BW_NORMAL_AVG4,
+                                          bmaSensor.PERF_CONTINUOUS_MODE);
+            bmaSensor.enableAccelerometer();
+            bmaSensor.configInterrupt(BMA4_LEVEL_TRIGGER, BMA4_ACTIVE_HIGH, BMA4_PUSH_PULL, BMA4_OUTPUT_ENABLE,
+                                      BMA4_INPUT_DISABLE);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+#ifdef T_WATCH_S3
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setReampAxes(bmaSensor.REMAP_TOP_LAYER_RIGHT_CORNER);
+#else
+            bmaSensor.setReampAxes(bmaSensor.REMAP_BOTTOM_LAYER_BOTTOM_LEFT_CORNER);
+#endif
+            // bmaSensor.enableFeature(bmaSensor.FEATURE_STEP_CNTR, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_TILT, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_WAKEUP, true);
+            // bmaSensor.resetPedometer();
+
+            // Turn on feature interrupt
+            bmaSensor.enablePedometerIRQ();
+            bmaSensor.enableTiltIRQ();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupIRQ();
+#ifdef RAK_4631
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMX160 && bmx160.begin()) {
+            bmx160.ODR_Config(BMX160_ACCEL_ODR_100HZ, BMX160_GYRO_ODR_100HZ); // set output data rate
+
+#endif
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.begin_I2C(accelerometer_found.address)) {
+            LOG_DEBUG("LSM6DS3 initializing\n");
+            // Default threshold of 2G, less sensitive options are 4, 8 or 16G
+            lsm.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
+#ifndef LSM6DS3_WAKE_THRESH
+#define LSM6DS3_WAKE_THRESH 20
+#endif
+            lsm.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
+            // Duration is number of occurances needed to trigger, higher threshold is less sensitive
+        }
+    }
+    void wakeScreen()
+    {
+        if (powerFSM.getState() == &stateDARK) {
+            LOG_INFO("Tap or motion detected. Turning on screen\n");
+            powerFSM.trigger(EVENT_INPUT);
+        }
+    }
+
+    void buttonPress()
+    {
+        LOG_DEBUG("Double-tap detected. Firing button press\n");
+        powerFSM.trigger(EVENT_PRESS);
+    }
+
+    ScanI2C::DeviceType acceleremoter_type;
+    Adafruit_MPU6050 mpu;
+    Adafruit_LIS3DH lis;
+    Adafruit_LSM6DS3TRC lsm;
+    SensorBMA423 bmaSensor;
+    bool BMA_IRQ = false;
+#ifdef RAK_4631
+    bool showingScreen = false;
+    RAK_BMX160 bmx160;
+    float highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
+
+    static void drawFrameCalibration(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+    {
+        int x_offset = display->width() / 2;
+        int y_offset = display->height() <= 80 ? 0 : 32;
+        display->setTextAlignment(TEXT_ALIGN_LEFT);
+        display->setFont(FONT_MEDIUM);
+        display->drawString(x, y, "Calibrating\nCompass");
+        int16_t compassX = 0, compassY = 0;
+        uint16_t compassDiam = graphics::Screen::getCompassDiam(display->getWidth(), display->getHeight());
+
+        // coordinates for the center of the compass/circle
+        if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
+            compassX = x + display->getWidth() - compassDiam / 2 - 5;
+            compassY = y + display->getHeight() / 2;
+        } else {
+            compassX = x + display->getWidth() - compassDiam / 2 - 5;
+            compassY = y + FONT_HEIGHT_SMALL + (display->getHeight() - FONT_HEIGHT_SMALL) / 2;
+        }
+        display->drawCircle(compassX, compassY, compassDiam / 2);
+        screen->drawCompassNorth(display, compassX, compassY, screen->getHeading() * PI / 180);
+    }
+#endif
+};
+
+#endif

src/AmbientLightingThread.h

@@ -42,18 +42,18 @@ class AmbientLightingThread : public concurrency::OSThread
 #ifdef HAS_NCP5623
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
-            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus");
+            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus\n");
             disable();
             return;
         }
 #endif
 #if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
         if (!moduleConfig.ambient_lighting.led_state) {
-            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF");
+            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
             disable();
             return;
         }
-        LOG_DEBUG("AmbientLightingThread initializing");
+        LOG_DEBUG("AmbientLightingThread initializing\n");
 #ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
@@ -106,27 +106,27 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(0);
         rgb.setGreen(0);
         rgb.setBlue(0);
-        LOG_INFO("Turn Off NCP5623 Ambient lighting.");
+        LOG_INFO("Turn Off NCP5623 Ambient lighting.\n");
 #endif
 #ifdef HAS_NEOPIXEL
         pixels.clear();
         pixels.show();
-        LOG_INFO("Turn Off NeoPixel Ambient lighting.");
+        LOG_INFO("Turn Off NeoPixel Ambient lighting.\n");
 #endif
 #ifdef RGBLED_CA
         analogWrite(RGBLED_RED, 255 - 0);
         analogWrite(RGBLED_GREEN, 255 - 0);
         analogWrite(RGBLED_BLUE, 255 - 0);
-        LOG_INFO("Turn Off Ambient lighting RGB Common Anode.");
+        LOG_INFO("Turn Off Ambient lighting RGB Common Anode.\n");
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, 0);
         analogWrite(RGBLED_GREEN, 0);
         analogWrite(RGBLED_BLUE, 0);
-        LOG_INFO("Turn Off Ambient lighting RGB Common Cathode.");
+        LOG_INFO("Turn Off Ambient lighting RGB Common Cathode.\n");
 #endif
 #ifdef UNPHONE
         unphone.rgb(0, 0, 0);
-        LOG_INFO("Turn Off unPhone Ambient lighting.");
+        LOG_INFO("Turn Off unPhone Ambient lighting.\n");
 #endif
         return 0;
     }
@@ -138,7 +138,7 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(moduleConfig.ambient_lighting.red);
         rgb.setGreen(moduleConfig.ambient_lighting.green);
         rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d",
+        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                   moduleConfig.ambient_lighting.blue);
 #endif
@@ -158,7 +158,7 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
 #endif
         pixels.show();
-        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                   moduleConfig.ambient_lighting.blue);
 #endif
@@ -166,18 +166,18 @@ class AmbientLightingThread : public concurrency::OSThread
         analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
         analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d",
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
         analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d",
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
         unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d\n", moduleConfig.ambient_lighting.red,
                   moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
     }

src/ButtonThread.cpp

@@ -36,7 +36,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #if defined(ARCH_PORTDUINO)
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
         this->userButton = OneButton(settingsMap[user], true, true);
-        LOG_DEBUG("Using GPIO%02d for button", settingsMap[user]);
+        LOG_DEBUG("Using GPIO%02d for button\n", settingsMap[user]);
     }
 #elif defined(BUTTON_PIN)
     int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
@@ -47,7 +47,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #else
     this->userButton = OneButton(pin, true, true);
 #endif
-    LOG_DEBUG("Using GPIO%02d for button", pin);
+    LOG_DEBUG("Using GPIO%02d for button\n", pin);
 #endif
 
 #ifdef INPUT_PULLUP_SENSE
@@ -123,12 +123,7 @@ int32_t ButtonThread::runOnce()
     if (btnEvent != BUTTON_EVENT_NONE) {
         switch (btnEvent) {
         case BUTTON_EVENT_PRESSED: {
-            LOG_BUTTON("press!");
+            LOG_BUTTON("press!\n");
-            // If a nag notification is running, stop it and prevent other actions
-            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
-                externalNotificationModule->stopNow();
-                return 50;
-            }
 #ifdef BUTTON_PIN
             if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
                  moduleConfig.canned_message.inputbroker_pin_press) ||
@@ -148,7 +143,7 @@ int32_t ButtonThread::runOnce()
         }
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
-            LOG_BUTTON("Double press!");
+            LOG_BUTTON("Double press!\n");
             service->refreshLocalMeshNode();
             auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
             if (screen) {
@@ -162,7 +157,7 @@ int32_t ButtonThread::runOnce()
         }
 
         case BUTTON_EVENT_MULTI_PRESSED: {
-            LOG_BUTTON("Mulitipress! %hux", multipressClickCount);
+            LOG_BUTTON("Mulitipress! %hux\n", multipressClickCount);
             switch (multipressClickCount) {
 #if HAS_GPS
             // 3 clicks: toggle GPS
@@ -189,7 +184,7 @@ int32_t ButtonThread::runOnce()
         } // end multipress event
 
         case BUTTON_EVENT_LONG_PRESSED: {
-            LOG_BUTTON("Long press!");
+            LOG_BUTTON("Long press!\n");
             powerFSM.trigger(EVENT_PRESS);
             if (screen) {
                 screen->startAlert("Shutting down...");
@@ -201,7 +196,7 @@ int32_t ButtonThread::runOnce()
         // Do actual shutdown when button released, otherwise the button release
         // may wake the board immediatedly.
         case BUTTON_EVENT_LONG_RELEASED: {
-            LOG_INFO("Shutdown from long press");
+            LOG_INFO("Shutdown from long press\n");
             playShutdownMelody();
             delay(3000);
             power->shutdown();
@@ -210,7 +205,7 @@ int32_t ButtonThread::runOnce()
 
 #ifdef BUTTON_PIN_TOUCH
         case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
-            LOG_BUTTON("Touch press!");
+            LOG_BUTTON("Touch press!\n");
             if (screen) {
                 // Wake if asleep
                 if (powerFSM.getState() == &stateDARK)

src/DebugConfiguration.cpp

@@ -97,14 +97,12 @@ Syslog &Syslog::logMask(uint8_t priMask)
 
 void Syslog::enable()
 {
-    this->_client->begin(this->_port);
     this->_enabled = true;
 }
 
 void Syslog::disable()
 {
     this->_enabled = false;
-    this->_client->stop();
 }
 
 bool Syslog::isEnabled()

src/FSCommon.cpp

@@ -53,7 +53,7 @@ bool lfs_assert_failed =
 
 extern "C" void lfs_assert(const char *reason)
 {
-    LOG_ERROR("LFS assert: %s", reason);
+    LOG_ERROR("LFS assert: %s\n", reason);
     lfs_assert_failed = true;
 }
 
@@ -75,19 +75,19 @@ bool copyFile(const char *from, const char *to)
     r = OSFS::getFile(from, cbuffer);
 
     if (r == notfound) {
-        LOG_ERROR("Failed to open source file %s", from);
+        LOG_ERROR("Failed to open source file %s\n", from);
         return false;
     } else if (r == noerr) {
         r = OSFS::newFile(to, cbuffer, true);
         if (r == noerr) {
             return true;
         } else {
-            LOG_ERROR("OSFS Error %d", r);
+            LOG_ERROR("OSFS Error %d\n", r);
             return false;
         }
 
     } else {
-        LOG_ERROR("OSFS Error %d", r);
+        LOG_ERROR("OSFS Error %d\n", r);
         return false;
     }
     return true;
@@ -97,13 +97,13 @@ bool copyFile(const char *from, const char *to)
 
     File f1 = FSCom.open(from, FILE_O_READ);
     if (!f1) {
-        LOG_ERROR("Failed to open source file %s", from);
+        LOG_ERROR("Failed to open source file %s\n", from);
         return false;
     }
 
     File f2 = FSCom.open(to, FILE_O_WRITE);
     if (!f2) {
-        LOG_ERROR("Failed to open destination file %s", to);
+        LOG_ERROR("Failed to open destination file %s\n", to);
         return false;
     }
 
@@ -231,7 +231,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
 #ifdef ARCH_ESP32
                 listDir(file.path(), levels - 1, del);
                 if (del) {
-                    LOG_DEBUG("Removing %s", file.path());
+                    LOG_DEBUG("Removing %s\n", file.path());
                     strncpy(buffer, file.path(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
@@ -241,7 +241,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
                 listDir(file.name(), levels - 1, del);
                 if (del) {
-                    LOG_DEBUG("Removing %s", file.name());
+                    LOG_DEBUG("Removing %s\n", file.name());
                     strncpy(buffer, file.name(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
@@ -249,7 +249,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
                     file.close();
                 }
 #else
-                LOG_DEBUG(" %s (directory)", file.name());
+                LOG_DEBUG(" %s (directory)\n", file.name());
                 listDir(file.name(), levels - 1, del);
                 file.close();
 #endif
@@ -257,26 +257,26 @@ void listDir(const char *dirname, uint8_t levels, bool del)
         } else {
 #ifdef ARCH_ESP32
             if (del) {
-                LOG_DEBUG("Deleting %s", file.path());
+                LOG_DEBUG("Deleting %s\n", file.path());
                 strncpy(buffer, file.path(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
-                LOG_DEBUG(" %s (%i Bytes)", file.path(), file.size());
+                LOG_DEBUG(" %s (%i Bytes)\n", file.path(), file.size());
                 file.close();
             }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
             if (del) {
-                LOG_DEBUG("Deleting %s", file.name());
+                LOG_DEBUG("Deleting %s\n", file.name());
                 strncpy(buffer, file.name(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
-                LOG_DEBUG(" %s (%i Bytes)", file.name(), file.size());
+                LOG_DEBUG(" %s (%i Bytes)\n", file.name(), file.size());
                 file.close();
             }
 #else
-            LOG_DEBUG("   %s (%i Bytes)", file.name(), file.size());
+            LOG_DEBUG("   %s (%i Bytes)\n", file.name(), file.size());
             file.close();
 #endif
         }
@@ -284,7 +284,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
     }
 #ifdef ARCH_ESP32
     if (del) {
-        LOG_DEBUG("Removing %s", root.path());
+        LOG_DEBUG("Removing %s\n", root.path());
         strncpy(buffer, root.path(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
@@ -293,7 +293,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
     }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
     if (del) {
-        LOG_DEBUG("Removing %s", root.name());
+        LOG_DEBUG("Removing %s\n", root.name());
         strncpy(buffer, root.name(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
@@ -329,13 +329,13 @@ void fsInit()
 {
 #ifdef FSCom
     if (!FSBegin()) {
-        LOG_ERROR("Filesystem mount Failed.");
+        LOG_ERROR("Filesystem mount Failed.\n");
         // assert(0); This auto-formats the partition, so no need to fail here.
     }
 #if defined(ARCH_ESP32)
-    LOG_DEBUG("Filesystem files (%d/%d Bytes):", FSCom.usedBytes(), FSCom.totalBytes());
+    LOG_DEBUG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
 #else
-    LOG_DEBUG("Filesystem files:");
+    LOG_DEBUG("Filesystem files:\n");
 #endif
     listDir("/", 10);
 #endif
@@ -350,28 +350,28 @@ void setupSDCard()
     SDHandler.begin(SPI_SCK, SPI_MISO, SPI_MOSI);
 
     if (!SD.begin(SDCARD_CS, SDHandler)) {
-        LOG_DEBUG("No SD_MMC card detected");
+        LOG_DEBUG("No SD_MMC card detected\n");
         return;
     }
     uint8_t cardType = SD.cardType();
     if (cardType == CARD_NONE) {
-        LOG_DEBUG("No SD_MMC card attached");
+        LOG_DEBUG("No SD_MMC card attached\n");
         return;
     }
     LOG_DEBUG("SD_MMC Card Type: ");
     if (cardType == CARD_MMC) {
-        LOG_DEBUG("MMC");
+        LOG_DEBUG("MMC\n");
     } else if (cardType == CARD_SD) {
-        LOG_DEBUG("SDSC");
+        LOG_DEBUG("SDSC\n");
     } else if (cardType == CARD_SDHC) {
-        LOG_DEBUG("SDHC");
+        LOG_DEBUG("SDHC\n");
     } else {
-        LOG_DEBUG("UNKNOWN");
+        LOG_DEBUG("UNKNOWN\n");
     }
 
     uint64_t cardSize = SD.cardSize() / (1024 * 1024);
-    LOG_DEBUG("SD Card Size: %lu MB", (uint32_t)cardSize);
+    LOG_DEBUG("SD Card Size: %lluMB\n", cardSize);
-    LOG_DEBUG("Total space: %lu MB", (uint32_t)(SD.totalBytes() / (1024 * 1024)));
+    LOG_DEBUG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
-    LOG_DEBUG("Used space: %lu MB", (uint32_t)(SD.usedBytes() / (1024 * 1024)));
+    LOG_DEBUG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
 #endif
 }

src/GPSStatus.h

@@ -51,7 +51,7 @@ class GPSStatus : public Status
     {
         if (config.position.fixed_position) {
 #ifdef GPS_EXTRAVERBOSE
-            LOG_WARN("Using fixed latitude");
+            LOG_WARN("Using fixed latitude\n");
 #endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.latitude_i;
@@ -64,7 +64,7 @@ class GPSStatus : public Status
     {
         if (config.position.fixed_position) {
 #ifdef GPS_EXTRAVERBOSE
-            LOG_WARN("Using fixed longitude");
+            LOG_WARN("Using fixed longitude\n");
 #endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.longitude_i;
@@ -77,7 +77,7 @@ class GPSStatus : public Status
     {
         if (config.position.fixed_position) {
 #ifdef GPS_EXTRAVERBOSE
-            LOG_WARN("Using fixed altitude");
+            LOG_WARN("Using fixed altitude\n");
 #endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.altitude;
@@ -95,7 +95,7 @@ class GPSStatus : public Status
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x", newStatus->p.timestamp, p.timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
         return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                 newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
@@ -112,7 +112,7 @@ class GPSStatus : public Status
 
         if (isDirty && p.timestamp && (newStatus->p.timestamp == p.timestamp)) {
             // We can NEVER be in two locations at the same time! (also PR #886)
-            LOG_ERROR("BUG: Positional timestamp unchanged from prev solution");
+            LOG_ERROR("BUG: Positional timestamp unchanged from prev solution\n");
         }
 
         initialized = true;
@@ -124,11 +124,11 @@ class GPSStatus : public Status
         if (isDirty) {
             if (hasLock) {
                 // In debug logs, identify position by @timestamp:stage (stage 3 = notify)
-                LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d", p.timestamp,
+                LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d\n", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
                           p.ground_speed * 1e-2, p.sats_in_view);
             } else {
-                LOG_DEBUG("No GPS lock");
+                LOG_DEBUG("No GPS lock\n");
             }
             onNewStatus.notifyObservers(this);
         }

src/GpioLogic.cpp

@@ -10,13 +10,6 @@ void GpioVirtPin::set(bool value)
     }
 }
 
-void GpioHwPin::set(bool value)
-{
-    // if (num == 3) LOG_DEBUG("Setting pin %d to %d", num, value);
-    pinMode(num, OUTPUT);
-    digitalWrite(num, value);
-}
-
 GpioTransformer::GpioTransformer(GpioPin *outPin) : outPin(outPin) {}
 
 void GpioTransformer::set(bool value)
@@ -24,7 +17,7 @@ void GpioTransformer::set(bool value)
     outPin->set(value);
 }
 
-GpioUnaryTransformer::GpioUnaryTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioTransformer(outPin), inPin(inPin)
+GpioNotTransformer::GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioTransformer(outPin), inPin(inPin)
 {
     assert(!inPin->dependentPin); // We only allow one dependent pin
     inPin->dependentPin = this;
@@ -34,18 +27,6 @@ GpioUnaryTransformer::GpioUnaryTransformer(GpioVirtPin *inPin, GpioPin *outPin)
     // update();
 }
 
-/**
- * Update the output pin based on the current state of the input pin.
- */
-void GpioUnaryTransformer::update()
-{
-    auto p = inPin->get();
-    if (p == GpioVirtPin::PinState::Unset)
-        return; // Not yet fully initialized
-
-    set(p);
-}
-
 /**
  * Update the output pin based on the current state of the input pin.
  */
@@ -88,7 +69,6 @@ void GpioBinaryTransformer::update()
             newValue = (GpioVirtPin::PinState)(p1 && p2);
             break;
         case Or:
-            // LOG_DEBUG("Doing GPIO OR");
             newValue = (GpioVirtPin::PinState)(p1 || p2);
             break;
         case Xor:

src/GpioLogic.h

@@ -29,7 +29,7 @@ class GpioHwPin : public GpioPin
   public:
     explicit GpioHwPin(uint32_t num) : num(num) {}
 
-    void set(bool value);
+    void set(bool value) { digitalWrite(num, value); }
 };
 
 class GpioTransformer;
@@ -42,7 +42,7 @@ class GpioBinaryTransformer;
 class GpioVirtPin : public GpioPin
 {
     friend class GpioBinaryTransformer;
-    friend class GpioUnaryTransformer;
+    friend class GpioNotTransformer;
 
   public:
     enum PinState { On = true, Off = false, Unset = 2 };
@@ -78,32 +78,13 @@ class GpioTransformer
     GpioPin *outPin;
 };
 
-/**
- * A transformer that just drives a hw pin based on a virtual pin.
- */
-class GpioUnaryTransformer : public GpioTransformer
-{
-  public:
-    GpioUnaryTransformer(GpioVirtPin *inPin, GpioPin *outPin);
-
-  protected:
-    friend class GpioVirtPin;
-
-    /**
-     * Update the output pin based on the current state of the input pin.
-     */
-    virtual void update();
-
-    GpioVirtPin *inPin;
-};
-
 /**
  * A transformer that performs a unary NOT operation from an input.
  */
-class GpioNotTransformer : public GpioUnaryTransformer
+class GpioNotTransformer : public GpioTransformer
 {
   public:
-    GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioUnaryTransformer(inPin, outPin) {}
+    GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin);
 
   protected:
     friend class GpioVirtPin;
@@ -112,6 +93,9 @@ class GpioNotTransformer : public GpioUnaryTransformer
      * Update the output pin based on the current state of the input pin.
      */
     void update();
+
+  private:
+    GpioVirtPin *inPin;
 };
 
 /**

src/NodeStatus.h

@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %d online, %d total\n", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -13,7 +13,6 @@
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
-#include "Throttle.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
@@ -31,7 +30,6 @@
 #if HAS_WIFI
 #include <WiFi.h>
 #endif
-
 #endif
 
 #ifndef DELAY_FOREVER
@@ -77,15 +75,6 @@ INA219Sensor ina219Sensor;
 INA3221Sensor ina3221Sensor;
 #endif
 
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-#include "modules/Telemetry/Sensor/MAX17048Sensor.h"
-#include <utility>
-extern std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1];
-#if HAS_TELEMETRY && (!MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR || !MESHTASTIC_EXCLUDE_POWER_TELEMETRY)
-MAX17048Sensor max17048Sensor;
-#endif
-#endif
-
 #if HAS_RAKPROT && !defined(ARCH_PORTDUINO)
 RAK9154Sensor rak9154Sensor;
 #endif
@@ -147,40 +136,11 @@ using namespace meshtastic;
  */
 static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level sensor
 
-#ifdef BATTERY_PIN
-
-static void adcEnable()
-{
-#ifdef ADC_CTRL // enable adc voltage divider when we need to read
-#ifdef ADC_USE_PULLUP
-    pinMode(ADC_CTRL, INPUT_PULLUP);
-#else
-    pinMode(ADC_CTRL, OUTPUT);
-    digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
-#endif
-    delay(10);
-#endif
-}
-
-static void adcDisable()
-{
-#ifdef ADC_CTRL // disable adc voltage divider when we need to read
-#ifdef ADC_USE_PULLUP
-    pinMode(ADC_CTRL, INPUT_PULLDOWN);
-#else
-    digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
-#endif
-#endif
-}
-
-#endif
-
 /**
  * A simple battery level sensor that assumes the battery voltage is attached via a voltage-divider to an analog input
  */
 class AnalogBatteryLevel : public HasBatteryLevel
 {
-  public:
     /**
      * Battery state of charge, from 0 to 100 or -1 for unknown
      */
@@ -240,7 +200,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
     !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
-            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage", config.power.device_battery_ina_address);
+            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
             return getINAVoltage();
         }
 #endif
@@ -260,25 +220,31 @@ class AnalogBatteryLevel : public HasBatteryLevel
             config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER;
         // Do not call analogRead() often.
         const uint32_t min_read_interval = 5000;
-        if (!Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
+        if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
             uint32_t raw = 0;
             float scaled = 0;
 
-            adcEnable();
 #ifdef ARCH_ESP32 // ADC block for espressif platforms
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
             scaled *= operativeAdcMultiplier;
 #else           // block for all other platforms
+#ifdef ADC_CTRL // enable adc voltage divider when we need to read
+            pinMode(ADC_CTRL, OUTPUT);
+            digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+            delay(10);
+#endif
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
+#ifdef ADC_CTRL // disable adc voltage divider when we need to read
+            digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
+#endif
 #endif
-            adcDisable();
 
             if (!initial_read_done) {
                 // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
@@ -290,7 +256,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
             }
 
-            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
+            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
             // (last_read_value));
         }
         return last_read_value;
@@ -309,6 +275,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
         uint8_t raw_c = 0; // raw reading counter
 
 #ifndef BAT_MEASURE_ADC_UNIT // ADC1
+#ifdef ADC_CTRL              // enable adc voltage divider when we need to read
+        pinMode(ADC_CTRL, OUTPUT);
+        digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+        delay(10);
+#endif
         for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
             int val_ = adc1_get_raw(adc_channel);
             if (val_ >= 0) { // save only valid readings
@@ -317,7 +288,18 @@ class AnalogBatteryLevel : public HasBatteryLevel
             }
             // delayMicroseconds(100);
         }
+#ifdef ADC_CTRL // disable adc voltage divider when we need to read
+        digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
+#endif
 #else // ADC2
+#ifdef ADC_CTRL
+#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
+        pinMode(ADC_CTRL, OUTPUT);
+        digitalWrite(ADC_CTRL, LOW); // ACTIVE LOW
+        delay(10);
+#endif
+#endif // End ADC_CTRL
+
 #ifdef CONFIG_IDF_TARGET_ESP32S3 // ESP32S3
         // ADC2 wifi bug workaround not required, breaks compile
         // On ESP32S3, ADC2 can take turns with Wifi (?)
@@ -335,7 +317,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 raw += adc_buf;
                 raw_c++; // Count valid samples
             } else {
-                LOG_DEBUG("An attempt to sample ADC2 failed");
+                LOG_DEBUG("An attempt to sample ADC2 failed\n");
             }
         }
 
@@ -352,6 +334,12 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #endif // BAT_MEASURE_ADC_UNIT
 
+#ifdef ADC_CTRL
+#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
+        digitalWrite(ADC_CTRL, HIGH);
+#endif
+#endif // End ADC_CTRL
+
 #endif // End BAT_MEASURE_ADC_UNIT
         return (raw / (raw_c < 1 ? 1 : raw_c));
     }
@@ -495,7 +483,7 @@ bool Power::analogInit()
 #endif
 
 #ifdef BATTERY_PIN
-    LOG_DEBUG("Using analog input %d for battery level", BATTERY_PIN);
+    LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
 
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
@@ -526,18 +514,18 @@ bool Power::analogInit()
     esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
     // show ADC characterization base
     if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
-        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse");
+        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
     } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
-        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse");
+        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
     }
 #ifdef CONFIG_IDF_TARGET_ESP32S3
     // ESP32S3
     else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
-        LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse");
+        LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse\n");
     }
 #endif
     else {
-        LOG_INFO("ADCmod: ADC characterization based on default reference voltage");
+        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
     }
 #endif // ARCH_ESP32
 
@@ -567,12 +555,7 @@ bool Power::analogInit()
  */
 bool Power::setup()
 {
-    // initialise one power sensor (only)
+    bool found = axpChipInit() || analogInit();
-    bool found = axpChipInit();
-    if (!found)
-        found = lipoInit();
-    if (!found)
-        found = analogInit();
 
 #ifdef NRF_APM
     found = true;
@@ -586,9 +569,9 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-    LOG_INFO("Shutting down");
+    LOG_INFO("Shutting down\n");
 
-#if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
 #ifdef PIN_LED1
     ledOff(PIN_LED1);
 #endif
@@ -641,7 +624,7 @@ void Power::readPowerStatus()
                // changes.
 
     nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
-    // LOG_DEBUG("NRF Power %d", nrf_usb_state);
+    // LOG_DEBUG("NRF Power %d\n", nrf_usb_state);
 
     // If changed to DISCONNECTED
     if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED)
@@ -654,22 +637,22 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isCharging, batteryVoltageMv, batteryChargePercent);
-    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
+    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
-              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+              powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        std::string threadlist = "Threads running:";
+        LOG_DEBUG("Threads running:");
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                threadlist += vformat(" %s", thread->ThreadName.c_str());
+                LOG_DEBUG(" %s", thread->ThreadName.c_str());
                 running++;
             }
         }
-        LOG_DEBUG(threadlist.c_str());
+        LOG_DEBUG("\n");
-        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
                   memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
     }
@@ -702,13 +685,13 @@ void Power::readPowerStatus()
     if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
         if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
             low_voltage_counter++;
-            LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
+            LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
             if (low_voltage_counter > 10) {
 #ifdef ARCH_NRF52
                 // We can't trigger deep sleep on NRF52, it's freezing the board
-                LOG_DEBUG("Low voltage detected, but not triggering deep sleep");
+                LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
 #else
-                LOG_INFO("Low voltage detected, triggering deep sleep");
+                LOG_INFO("Low voltage detected, triggering deep sleep\n");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
 #endif
             }
@@ -730,12 +713,12 @@ int32_t Power::runOnce()
         PMU->getIrqStatus();
 
         if (PMU->isVbusRemoveIrq()) {
-            LOG_INFO("USB unplugged");
+            LOG_INFO("USB unplugged\n");
             powerFSM.trigger(EVENT_POWER_DISCONNECTED);
         }
 
         if (PMU->isVbusInsertIrq()) {
-            LOG_INFO("USB plugged In");
+            LOG_INFO("USB plugged In\n");
             powerFSM.trigger(EVENT_POWER_CONNECTED);
         }
 
@@ -743,21 +726,21 @@ int32_t Power::runOnce()
         Other things we could check if we cared...
 
         if (PMU->isBatChagerStartIrq()) {
-            LOG_DEBUG("Battery start charging");
+            LOG_DEBUG("Battery start charging\n");
         }
         if (PMU->isBatChagerDoneIrq()) {
-            LOG_DEBUG("Battery fully charged");
+            LOG_DEBUG("Battery fully charged\n");
         }
         if (PMU->isBatInsertIrq()) {
-            LOG_DEBUG("Battery inserted");
+            LOG_DEBUG("Battery inserted\n");
         }
         if (PMU->isBatRemoveIrq()) {
-            LOG_DEBUG("Battery removed");
+            LOG_DEBUG("Battery removed\n");
         }
         */
 #ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
-            LOG_DEBUG("PEK long button press");
+            LOG_DEBUG("PEK long button press\n");
             screen->setOn(false);
         }
 #endif
@@ -800,22 +783,22 @@ bool Power::axpChipInit()
     if (!PMU) {
         PMU = new XPowersAXP2101(*w);
         if (!PMU->init()) {
-            LOG_WARN("Failed to find AXP2101 power management");
+            LOG_WARN("Failed to find AXP2101 power management\n");
             delete PMU;
             PMU = NULL;
         } else {
-            LOG_INFO("AXP2101 PMU init succeeded, using AXP2101 PMU");
+            LOG_INFO("AXP2101 PMU init succeeded, using AXP2101 PMU\n");
         }
     }
 
     if (!PMU) {
         PMU = new XPowersAXP192(*w);
         if (!PMU->init()) {
-            LOG_WARN("Failed to find AXP192 power management");
+            LOG_WARN("Failed to find AXP192 power management\n");
             delete PMU;
             PMU = NULL;
         } else {
-            LOG_INFO("AXP192 PMU init succeeded, using AXP192 PMU");
+            LOG_INFO("AXP192 PMU init succeeded, using AXP192 PMU\n");
         }
     }
 
@@ -971,54 +954,56 @@ bool Power::axpChipInit()
     PMU->enableVbusVoltageMeasure();
     PMU->enableBattVoltageMeasure();
 
+    LOG_DEBUG("=======================================================================\n");
     if (PMU->isChannelAvailable(XPOWERS_DCDC1)) {
-        LOG_DEBUG("DC1  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-",
+        LOG_DEBUG("DC1  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC1));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC2)) {
-        LOG_DEBUG("DC2  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-",
+        LOG_DEBUG("DC2  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC2));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC3)) {
-        LOG_DEBUG("DC3  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-",
+        LOG_DEBUG("DC3  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC3));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC4)) {
-        LOG_DEBUG("DC4  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-",
+        LOG_DEBUG("DC4  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC4));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO2)) {
-        LOG_DEBUG("LDO2 : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-",
+        LOG_DEBUG("LDO2 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_LDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO3)) {
-        LOG_DEBUG("LDO3 : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-",
+        LOG_DEBUG("LDO3 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_LDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO1)) {
-        LOG_DEBUG("ALDO1: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-",
+        LOG_DEBUG("ALDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO2)) {
-        LOG_DEBUG("ALDO2: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-",
+        LOG_DEBUG("ALDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO3)) {
-        LOG_DEBUG("ALDO3: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-",
+        LOG_DEBUG("ALDO3: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO4)) {
-        LOG_DEBUG("ALDO4: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-",
+        LOG_DEBUG("ALDO4: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO4));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO1)) {
-        LOG_DEBUG("BLDO1: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-",
+        LOG_DEBUG("BLDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO2)) {
-        LOG_DEBUG("BLDO2: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-",
+        LOG_DEBUG("BLDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
     }
+    LOG_DEBUG("=======================================================================\n");
 
 // We can safely ignore this approach for most (or all) boards because MCU turned off
 // earlier than battery discharged to 2.6V.
@@ -1062,81 +1047,3 @@ bool Power::axpChipInit()
     return false;
 #endif
 }
-
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-
-/**
- * Wrapper class for an I2C MAX17048 Lipo battery sensor.
- */
-class LipoBatteryLevel : public HasBatteryLevel
-{
-  private:
-    MAX17048Singleton *max17048 = nullptr;
-
-  public:
-    /**
-     * Init the I2C MAX17048 Lipo battery level sensor
-     */
-    bool runOnce()
-    {
-        if (max17048 == nullptr) {
-            max17048 = MAX17048Singleton::GetInstance();
-        }
-
-        // try to start if the sensor has been detected
-        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MAX17048].first != 0) {
-            return max17048->runOnce(nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MAX17048].second);
-        }
-        return false;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return max17048->getBusBatteryPercent(); }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return max17048->getBusVoltageMv(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return max17048->isBatteryConnected(); }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return max17048->isExternallyPowered(); }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override { return max17048->isBatteryCharging(); }
-};
-
-LipoBatteryLevel lipoLevel;
-
-/**
- * Init the Lipo battery level sensor
- */
-bool Power::lipoInit()
-{
-    bool result = lipoLevel.runOnce();
-    LOG_DEBUG("Power::lipoInit lipo sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &lipoLevel;
-    return true;
-}
-
-#else
-/**
- * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::lipoInit()
-{
-    return false;
-}
-#endif

src/PowerFSM.cpp

@@ -53,7 +53,7 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_DEBUG("Enter state: SDS");
+    LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
@@ -62,7 +62,7 @@ extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_DEBUG("Enter state: SHUTDOWN");
+    LOG_DEBUG("Enter state: SHUTDOWN\n");
     power->shutdown();
 }
 
@@ -72,16 +72,16 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
+    LOG_INFO("lsEnter begin, ls_secs=%u\n", config.power.ls_secs);
     screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
-    // LOG_INFO("lsEnter end");
+    // LOG_INFO("lsEnter end\n");
 }
 
 static void lsIdle()
 {
-    // LOG_INFO("lsIdle begin ls_secs=%u", getPref_ls_secs());
+    // LOG_INFO("lsIdle begin ls_secs=%u\n", getPref_ls_secs());
 
 #ifdef ARCH_ESP32
 
@@ -105,7 +105,7 @@ static void lsIdle()
                 wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
-                // LOG_INFO("sleeping, flash led!");
+                // LOG_INFO("sleeping, flash led!\n");
                 break;
 
             case ESP_SLEEP_WAKEUP_UART:
@@ -137,7 +137,7 @@ static void lsIdle()
     } else {
         // Time to stop sleeping!
         ledBlink.set(false);
-        LOG_INFO("Reached ls_secs, servicing loop()");
+        LOG_INFO("Reached ls_secs, servicing loop()\n");
         powerFSM.trigger(EVENT_WAKE_TIMER);
     }
 #endif
@@ -145,12 +145,12 @@ static void lsIdle()
 
 static void lsExit()
 {
-    LOG_INFO("Exit state: LS");
+    LOG_INFO("Exit state: LS\n");
 }
 
 static void nbEnter()
 {
-    LOG_DEBUG("Enter state: NB");
+    LOG_DEBUG("Enter state: NB\n");
     screen->setOn(false);
 #ifdef ARCH_ESP32
     // Only ESP32 should turn off bluetooth
@@ -168,7 +168,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_DEBUG("Enter state: SERIAL");
+    LOG_DEBUG("Enter state: SERIAL\n");
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -183,10 +183,10 @@ static void serialExit()
 
 static void powerEnter()
 {
-    // LOG_DEBUG("Enter state: POWER");
+    // LOG_DEBUG("Enter state: POWER\n");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
-        LOG_INFO("Loss of power in Powered");
+        LOG_INFO("Loss of power in Powered\n");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     } else {
         screen->setOn(true);
@@ -205,7 +205,7 @@ static void powerIdle()
 {
     if (!isPowered()) {
         // If we got here, we are in the wrong state
-        LOG_INFO("Loss of power in Powered");
+        LOG_INFO("Loss of power in Powered\n");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     }
 }
@@ -222,7 +222,7 @@ static void powerExit()
 
 static void onEnter()
 {
-    LOG_DEBUG("Enter state: ON");
+    LOG_DEBUG("Enter state: ON\n");
     screen->setOn(true);
     setBluetoothEnable(true);
 }
@@ -242,7 +242,7 @@ static void screenPress()
 
 static void bootEnter()
 {
-    LOG_DEBUG("Enter state: BOOT");
+    LOG_DEBUG("Enter state: BOOT\n");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -264,7 +264,7 @@ void PowerFSM_setup()
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
-    LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);
+    LOG_INFO("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
     powerFSM.add_timed_transition(&stateBOOT, hasPower ? &statePOWER : &stateON, 3 * 1000, NULL, "boot timeout");
 
     // wake timer expired or a packet arrived

src/PowerMon.cpp

@@ -35,7 +35,7 @@ void PowerMon::emitLog(const char *reason)
 {
 #ifdef USE_POWERMON
     // The nrf52 printf doesn't understand 64 bit ints, so if we ever reach that point this function will need to change.
-    LOG_INFO("S:PM:0x%08lx,%s", (uint32_t)states, reason);
+    LOG_INFO("S:PM:0x%08lx,%s\n", (uint32_t)states, reason);
 #endif
 }
 

src/PowerStatus.h

@@ -91,7 +91,7 @@ class PowerStatus : public Status
             isCharging = newStatus->isCharging;
         }
         if (isDirty) {
-            // LOG_DEBUG("Battery %dmV %d%%", batteryVoltageMv, batteryChargePercent);
+            // LOG_DEBUG("Battery %dmV %d%%\n", batteryVoltageMv, batteryChargePercent);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/RF95Configuration.h

@@ -3,4 +3,5 @@
 #define RF95_RESET LORA_RESET
 #define RF95_IRQ LORA_DIO0  // on SX1262 version this is a no connect DIO0
 #define RF95_DIO1 LORA_DIO1 // Note: not really used for RF95, but used for pure SX127x
+#define RF95_DIO2 LORA_DIO2 // Note: not really used for RF95
 #endif

src/RedirectablePrint.cpp

@@ -98,13 +98,16 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
 {
     size_t r = 0;
 
+    // Cope with 0 len format strings, but look for new line terminator
+    bool hasNewline = *format && format[strlen(format) - 1] == '\n';
 #ifdef ARCH_PORTDUINO
     bool color = !settingsMap[ascii_logs];
 #else
     bool color = true;
 #endif
 
-    // include the header
+    // If we are the first message on a report, include the header
+    if (!isContinuationMessage) {
         if (color) {
             if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
                 Print::write("\u001b[34m", 6);
@@ -166,7 +169,10 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
             print(thread->ThreadName);
             print("] ");
         }
+    }
     r += vprintf(logLevel, format, arg);
+
+    isContinuationMessage = !hasNewline;
 }
 
 void RedirectablePrint::log_to_syslog(const char *logLevel, const char *format, va_list arg)
@@ -277,14 +283,6 @@ meshtastic_LogRecord_Level RedirectablePrint::getLogLevel(const char *logLevel)
 
 void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
-
-    // append \n to format
-    size_t len = strlen(format);
-    char *newFormat = new char[len + 2];
-    strcpy(newFormat, format);
-    newFormat[len] = '\n';
-    newFormat[len + 1] = '\0';
-
 #if ARCH_PORTDUINO
     // level trace is special, two possible ways to handle it.
     if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
@@ -297,24 +295,17 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
             }
             va_end(arg);
         }
-        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
+        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0)
-            delete[] newFormat;
             return;
     }
-    }
+    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
-    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
-        delete[] newFormat;
         return;
-    } else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
+    else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
-        delete[] newFormat;
         return;
-    } else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
+    else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
-        delete[] newFormat;
         return;
-    }
 #endif
     if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
-        delete[] newFormat;
         return;
     }
 
@@ -328,9 +319,9 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
         va_list arg;
         va_start(arg, format);
 
-        log_to_serial(logLevel, newFormat, arg);
+        log_to_serial(logLevel, format, arg);
-        log_to_syslog(logLevel, newFormat, arg);
+        log_to_syslog(logLevel, format, arg);
-        log_to_ble(logLevel, newFormat, arg);
+        log_to_ble(logLevel, format, arg);
 
         va_end(arg);
 #ifdef HAS_FREE_RTOS
@@ -340,18 +331,17 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #endif
     }
 
-    delete[] newFormat;
     return;
 }
 
 void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16_t len)
 {
     const char alphabet[17] = "0123456789abcdef";
-    log(logLevel, "    +------------------------------------------------+ +----------------+");
+    log(logLevel, "    +------------------------------------------------+ +----------------+\n");
-    log(logLevel, "    |.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 .a .b .c .d .e .f | |      ASCII     |");
+    log(logLevel, "    |.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 .a .b .c .d .e .f | |      ASCII     |\n");
     for (uint16_t i = 0; i < len; i += 16) {
         if (i % 128 == 0)
-            log(logLevel, "    +------------------------------------------------+ +----------------+");
+            log(logLevel, "    +------------------------------------------------+ +----------------+\n");
         char s[] = "|                                                | |                |\n";
         uint8_t ix = 1, iy = 52;
         for (uint8_t j = 0; j < 16; j++) {
@@ -373,7 +363,7 @@ void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16
         log(logLevel, ".");
         log(logLevel, s);
     }
-    log(logLevel, "    +------------------------------------------------+ +----------------+");
+    log(logLevel, "    +------------------------------------------------+ +----------------+\n");
 }
 
 std::string RedirectablePrint::mt_sprintf(const std::string fmt_str, ...)

src/RedirectablePrint.h

@@ -15,6 +15,9 @@ class RedirectablePrint : public Print
 {
     Print *dest;
 
+    /// Used to allow multiple logDebug messages to appear on a single log line
+    bool isContinuationMessage = false;
+
 #ifdef HAS_FREE_RTOS
     SemaphoreHandle_t inDebugPrint = nullptr;
     StaticSemaphore_t _MutexStorageSpace;

src/SafeFile.cpp

@@ -59,14 +59,14 @@ bool SafeFile::close()
 
     // brief window of risk here ;-)
     if (fullAtomic && FSCom.exists(filename.c_str()) && !FSCom.remove(filename.c_str())) {
-        LOG_ERROR("Can't remove old pref file");
+        LOG_ERROR("Can't remove old pref file\n");
         return false;
     }
 
     String filenameTmp = filename;
     filenameTmp += ".tmp";
     if (!renameFile(filenameTmp.c_str(), filename.c_str())) {
-        LOG_ERROR("Error: can't rename new pref file");
+        LOG_ERROR("Error: can't rename new pref file\n");
         return false;
     }
 
@@ -83,7 +83,7 @@ bool SafeFile::testReadback()
     filenameTmp += ".tmp";
     auto f2 = FSCom.open(filenameTmp.c_str(), FILE_O_READ);
     if (!f2) {
-        LOG_ERROR("Can't open tmp file for readback");
+        LOG_ERROR("Can't open tmp file for readback\n");
         return false;
     }
 
@@ -95,7 +95,7 @@ bool SafeFile::testReadback()
     f2.close();
 
     if (test_hash != hash) {
-        LOG_ERROR("Readback failed hash mismatch");
+        LOG_ERROR("Readback failed hash mismatch\n");
         return false;
     }
 

src/SafeFile.h

@@ -24,7 +24,7 @@
 class SafeFile : public Print
 {
   public:
-    explicit SafeFile(char const *filepath, bool fullAtomic = false);
+    SafeFile(char const *filepath, bool fullAtomic = false);
 
     virtual size_t write(uint8_t);
     virtual size_t write(const uint8_t *buffer, size_t size);

src/SerialConsole.cpp

@@ -1,8 +1,6 @@
 #include "SerialConsole.h"
-#include "Default.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
-#include "Throttle.h"
 #include "configuration.h"
 #include "time.h"
 
@@ -46,11 +44,10 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
     Port.setRX(SERIAL2_RX);
 #endif
     Port.begin(SERIAL_BAUD);
-#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040) ||   \
+#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
-    defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32C6)
     time_t timeout = millis();
     while (!Port) {
-        if (Throttle::isWithinTimespanMs(timeout, FIVE_SECONDS_MS)) {
+        if ((millis() - timeout) < 5000) {
             delay(100);
         } else {
             break;
@@ -75,7 +72,8 @@ void SerialConsole::flush()
 // For the serial port we can't really detect if any client is on the other side, so instead just look for recent messages
 bool SerialConsole::checkIsConnected()
 {
-    return Throttle::isWithinTimespanMs(lastContactMsec, SERIAL_CONNECTION_TIMEOUT);
+    uint32_t now = millis();
+    return (now - lastContactMsec) < SERIAL_CONNECTION_TIMEOUT;
 }
 
 /**

src/airtime.cpp

@@ -13,17 +13,17 @@ void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms)
 {
 
     if (reportType == TX_LOG) {
-        LOG_DEBUG("Packet transmitted : %ums", airtime_ms);
+        LOG_DEBUG("AirTime - Packet transmitted : %ums\n", airtime_ms);
         this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms;
         air_period_tx[0] = air_period_tx[0] + airtime_ms;
 
         this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms;
     } else if (reportType == RX_LOG) {
-        LOG_DEBUG("Packet received : %ums", airtime_ms);
+        LOG_DEBUG("AirTime - Packet received : %ums\n", airtime_ms);
         this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms;
         air_period_rx[0] = air_period_rx[0] + airtime_ms;
     } else if (reportType == RX_ALL_LOG) {
-        LOG_DEBUG("Packet received (noise?) : %ums", airtime_ms);
+        LOG_DEBUG("AirTime - Packet received (noise?) : %ums\n", airtime_ms);
         this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms;
     }
 
@@ -50,7 +50,7 @@ void AirTime::airtimeRotatePeriod()
 {
 
     if (this->airtimes.lastPeriodIndex != this->currentPeriodIndex()) {
-        LOG_DEBUG("Rotating airtimes to a new period = %u", this->currentPeriodIndex());
+        LOG_DEBUG("Rotating airtimes to a new period = %u\n", this->currentPeriodIndex());
 
         for (int i = PERIODS_TO_LOG - 2; i >= 0; --i) {
             this->airtimes.periodTX[i + 1] = this->airtimes.periodTX[i];
@@ -105,7 +105,7 @@ float AirTime::channelUtilizationPercent()
     uint32_t sum = 0;
     for (uint32_t i = 0; i < CHANNEL_UTILIZATION_PERIODS; i++) {
         sum += this->channelUtilization[i];
-        // LOG_DEBUG("ChanUtilArray %u %u", i, this->channelUtilization[i]);
+        // LOG_DEBUG("ChanUtilArray %u %u\n", i, this->channelUtilization[i]);
     }
 
     return (float(sum) / float(CHANNEL_UTILIZATION_PERIODS * 10 * 1000)) * 100;
@@ -127,7 +127,7 @@ bool AirTime::isTxAllowedChannelUtil(bool polite)
     if (channelUtilizationPercent() < percentage) {
         return true;
     } else {
-        LOG_WARN("Channel utilization is >%d percent. Skipping this opportunity to send.", percentage);
+        LOG_WARN("Channel utilization is >%d percent. Skipping this opportunity to send.\n", percentage);
         return false;
     }
 }
@@ -138,7 +138,7 @@ bool AirTime::isTxAllowedAirUtil()
         if (utilizationTXPercent() < myRegion->dutyCycle * polite_duty_cycle_percent / 100) {
             return true;
         } else {
-            LOG_WARN("Tx air utilization is >%f percent. Skipping this opportunity to send.",
+            LOG_WARN("Tx air utilization is >%f percent. Skipping this opportunity to send.\n",
                      myRegion->dutyCycle * polite_duty_cycle_percent / 100);
             return false;
         }
@@ -209,13 +209,13 @@ int32_t AirTime::runOnce()
         }
     }
     /*
-        LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%", utilPeriodTX, airTime->utilizationTXPercent());
+        LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%\n", utilPeriodTX, airTime->utilizationTXPercent());
         for (uint32_t i = 0; i < MINUTES_IN_HOUR; i++) {
             LOG_DEBUG(
                 "%d,", this->utilizationTX[i]
                 );
         }
-        LOG_DEBUG("");
+        LOG_DEBUG("\n");
     */
     return (1000 * 1);
 }

src/concurrency/InterruptableDelay.cpp

@@ -18,7 +18,7 @@ bool InterruptableDelay::delay(uint32_t msec)
     // sem take will return false if we timed out (i.e. were not interrupted)
     bool r = semaphore.take(msec);
 
-    // LOG_DEBUG("interrupt=%d", r);
+    // LOG_DEBUG("interrupt=%d\n", r);
     return !r;
 }
 

src/concurrency/NotifiedWorkerThread.cpp

@@ -32,12 +32,12 @@ IRAM_ATTR bool NotifiedWorkerThread::notifyCommon(uint32_t v, bool overwrite)
 
         notification = v;
         if (debugNotification) {
-            LOG_DEBUG("setting notification %d", v);
+            LOG_DEBUG("setting notification %d\n", v);
         }
         return true;
     } else {
         if (debugNotification) {
-            LOG_DEBUG("dropping notification %d", v);
+            LOG_DEBUG("dropping notification %d\n", v);
         }
         return false;
     }
@@ -67,7 +67,7 @@ bool NotifiedWorkerThread::notifyLater(uint32_t delay, uint32_t v, bool overwrit
     if (didIt) {                   // If we didn't already have something queued, override the delay to be larger
         setIntervalFromNow(delay); // a new version of setInterval relative to the current time
         if (debugNotification) {
-            LOG_DEBUG("delaying notification %u", delay);
+            LOG_DEBUG("delaying notification %u\n", delay);
         }
     }