WIP

.devcontainer/99-platformio-udev.rules

@@ -1,183 +0,0 @@
-# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#    http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#####################################################################################
-#
-# INSTALLATION
-#
-# Please visit > https://docs.platformio.org/en/latest/core/installation/udev-rules.html
-#
-#####################################################################################
-
-#
-# Boards
-#
-
-# CP210X USB UART
-ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea[67][013]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="80a9", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# FT231XS USB UART
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Prolific Technology, Inc. PL2303 Serial Port
-ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# QinHeng Electronics HL-340 USB-Serial adapter
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-# QinHeng Electronics CH343 USB-Serial adapter
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d3", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-# QinHeng Electronics CH9102 USB-Serial adapter
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d4", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Arduino boards
-ATTRS{idVendor}=="2341", ATTRS{idProduct}=="[08][023]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="[08][02]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Arduino SAM-BA
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{MTP_NO_PROBE}="1"
-
-# Digistump boards
-ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Maple with DFU
-ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="000[34]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# USBtiny
-ATTRS{idProduct}=="0c9f", ATTRS{idVendor}=="1781", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# USBasp V2.0
-ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Teensy boards
-ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789A]?", ENV{MTP_NO_PROBE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789ABCD]?", MODE:="0666"
-KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", MODE:="0666"
-
-# TI Stellaris Launchpad
-ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI MSP430 Launchpad
-ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f432", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# GD32V DFU Bootloader
-ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="0189", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# FireBeetle-ESP32
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7522", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Wio Terminal
-ATTRS{idVendor}=="2886", ATTRS{idProduct}=="[08]02d", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Raspberry Pi Pico
-ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="[01]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# AIR32F103
-ATTRS{idVendor}=="0d28", ATTRS{idProduct}=="0204", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# STM32 virtual COM port
-ATTRS{idVendor}=="0483", ATTRS{idProduct}=="5740", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-#
-# Debuggers
-#
-
-# Black Magic Probe
-SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic GDB Server", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic UART Port", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# opendous and estick
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Original FT232/FT245/FT2232/FT232H/FT4232
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="60[01][104]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# DISTORTEC JTAG-lock-pick Tiny 2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TUMPA, TUMPA Lite
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a9[89]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# XDS100v2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Xverve Signalyzer Tool (DT-USB-ST), Signalyzer LITE (DT-USB-SLITE)
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI/Luminary Stellaris Evaluation Board FTDI (several)
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd[9a]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# egnite Turtelizer 2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Section5 ICEbear
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c14[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Amontec JTAGkey and JTAGkey-tiny
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI ICDI
-ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# STLink probes
-ATTRS{idVendor}=="0483", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Hilscher NXHX Boards
-ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Hitex probes
-ATTRS{idVendor}=="0640", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Altera USB Blaster
-ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Amontec JTAGkey-HiSpeed
-ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# SEGGER J-Link
-ATTRS{idVendor}=="1366", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Raisonance RLink
-ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Debug Board for Neo1973
-ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Olimex probes
-ATTRS{idVendor}=="15ba", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# USBprog with OpenOCD firmware
-ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
-ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Marvell Sheevaplug
-ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Keil Software, Inc. ULink
-ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2710", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# CMSIS-DAP compatible adapters
-ATTRS{product}=="*CMSIS-DAP*", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Atmel AVR Dragon
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2107", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Espressif USB JTAG/serial debug unit
-ATTRS{idVendor}=="303a", ATTRS{idProduct}=="1001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Zephyr framework USB CDC-ACM
-ATTRS{idVendor}=="2fe3", ATTRS{idProduct}=="0100", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"

.devcontainer/Dockerfile

@@ -1,9 +1,6 @@
 FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
 
-USER root
-
-# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore(hadolint/DL3008): Use latest version of packages
+# [Optional] Uncomment this section to install additional packages.
 RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     && apt-get -y install --no-install-recommends \
     ca-certificates \
@@ -23,16 +20,6 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     python3-wheel \
     wget \
     zip \
-    usbutils \
-    hwdata \
-    gpg \
-    gnupg2 \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
-RUN pipx install platformio==6.1.15
-
-COPY 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules
-
-USER vscode
-
-HEALTHCHECK NONE
+RUN pipx install platformio==6.1.15

.devcontainer/devcontainer.json

@@ -16,21 +16,13 @@
       "extensions": [
         "ms-vscode.cpptools",
         "platformio.platformio-ide",
-        "Trunk.io"
-      ],
-      "unwantedRecommendations": ["ms-azuretools.vscode-docker"],
-      "settings": {
-        "extensions.ignoreRecommendations": true
-      }
+      ]
     }
   },
 
   // Use 'forwardPorts' to make a list of ports inside the container available locally.
-  "forwardPorts": [4403],
-
-  // Use "--device=" to make a local device available inside the container.
-  // "runArgs": ["--device=/dev/ttyACM0"],
+  "forwardPorts": [ 4403 ],
 
   // Run commands to prepare the container for use
-  "postCreateCommand": ".devcontainer/setup.sh"
+  "postCreateCommand": ".devcontainer/setup.sh",
 }

.devcontainer/setup.sh

@@ -1,3 +1,3 @@
 #!/usr/bin/env sh
 
-git submodule update --init
+git submodule update --init

.env.example

@@ -1,4 +0,0 @@
-# Absolute path to the local meshtastic config.yaml file
-CONFIG_PATH=/path/to/meshtastic/config.yaml
-# USB device to passthrough (`lsusb -t`: look for `ch341`)
-USB_DEVICE=/dev/bus/usb/001/037

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,24 +49,10 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
-        - Heltec Mesh Node T114
-        - Heltec Vision Master E213
-        - Heltec Vision Master E290
-        - Heltec Vision Master T190
-        - Nano G1
-        - Nano G1 Explorer
-        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - Seeed Wio Tracker 1110
-        - Seeed Card Tracker T1000-E
-        - Station G1
-        - Station G2
-        - unPhone
-        - CanaryOne
-        - Chatter
-        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,7 +18,6 @@ body:
         - ESP32
         - RP2040
         - Linux Native
-        - Cross-Platform
         - other
     validations:
       required: true

.github/actions/build-variant/action.yml

@@ -1,101 +0,0 @@
-name: Setup Build Variant Composite Action
-description: Variant build actions for Meshtastic Platform IO steps
-
-inputs:
-  board:
-    description: The board to build for
-    required: true
-  github_token:
-    description: GitHub token
-    required: true
-  build-script-path:
-    description: Path to the build script
-    required: true
-  remove-debug-flags:
-    description: A space separated list of files to remove debug flags from
-    required: false
-    default: ""
-  ota-firmware-source:
-    description: The OTA firmware file to pull
-    required: false
-    default: ""
-  ota-firmware-target:
-    description: The target path to store the OTA firmware file
-    required: false
-    default: ""
-  artifact-paths:
-    description: A newline separated list of paths to store as artifacts
-    required: false
-    default: ""
-  include-web-ui:
-    description: Include the web UI in the build
-    required: false
-    default: "false"
-  arch:
-    description: Processor arch name
-    required: true
-    default: "esp32"
-
-runs:
-  using: composite
-  steps:
-    - name: Build base
-      id: base
-      uses: ./.github/actions/setup-base
-
-    - name: Pull web ui
-      if: inputs.include-web-ui == 'true'
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/web
-        file: build.tar
-        target: build.tar
-        token: ${{ inputs.github_token }}
-        version: tags/v2.5.3
-
-    - name: Unpack web ui
-      if: inputs.include-web-ui == 'true'
-      shell: bash
-      run: |
-        tar -xf build.tar -C data/static
-        rm build.tar
-
-    - name: Remove debug flags for release
-      shell: bash
-      if: inputs.remove-debug-flags != ''
-      run: |
-        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
-          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
-        done
-
-    - name: PlatformIO ${{ inputs.arch }} download cache
-      uses: actions/cache@v4
-      with:
-        path: ~/.platformio/.cache
-        key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
-
-    - name: Build ${{ inputs.board }}
-      shell: bash
-      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
-
-    - name: Pull OTA Firmware
-      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/firmware-ota
-        file: ${{ inputs.ota-firmware-source }}
-        target: ${{ inputs.ota-firmware-target }}
-        token: ${{ inputs.github_token }}
-
-    - name: Get release version string
-      shell: bash
-      run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-      id: version
-
-    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
-      with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
-        overwrite: true
-        path: |
-          ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -11,25 +11,23 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Uncomment build epoch
-      shell: bash
-      run: |
-        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
     - name: Install dependencies
       shell: bash
       run: |
         sudo apt-get -y update --fix-missing
-        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
+        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev
 
     - name: Setup Python
       uses: actions/setup-python@v5
       with:
         python-version: 3.x
-        cache: pip
-        cache-dependency-path: |
-          .github/actions/**
-          **.ini
+
+    # - name: Cache python libs
+    #   uses: actions/cache@v4
+    #   id: cache-pip # needed in if test
+    #   with:
+    #     path: ~/.cache/pip
+    #     key: ${{ runner.os }}-pip
 
     - name: Upgrade python tools
       shell: bash

.github/actions/setup-native/action.yml

@@ -1,14 +0,0 @@
-name: Setup native build
-description: Install libraries needed for building the Native/Portduino build
-
-runs:
-  using: composite
-  steps:
-    - name: Setup base
-      id: base
-      uses: ./.github/actions/setup-base
-
-    - name: Install libs needed for native build
-      shell: bash
-      run: |
-        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev

.github/dependabot.yml

@@ -1,26 +0,0 @@
-version: 2
-updates:
-  - package-ecosystem: docker
-    directory: devcontainer
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: docker
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: gitsubmodule
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: github-actions
-    directory: /.github/workflows
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific

.github/workflows/build_debian_src.yml

@@ -1,72 +0,0 @@
-name: Build Debian Source Package
-
-on:
-  workflow_call:
-    secrets:
-      PPA_GPG_PRIVATE_KEY:
-        required: true
-    inputs:
-      series:
-        description: Ubuntu/Debian series to target
-        required: true
-        type: string
-      build_location:
-        description: Location where build will execute
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-debian-src:
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install deps
-        shell: bash
-        working-directory: meshtasticd
-        run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y software-properties-common build-essential devscripts equivs
-          sudo add-apt-repository ppa:meshtastic/build-tools -y
-          sudo apt-get update -y --fix-missing
-          sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
-
-      - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v6
-        with:
-          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
-        id: gpg
-
-      - name: Get release version string
-        working-directory: meshtasticd
-        run: |
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        env:
-          BUILD_LOCATION: ${{ inputs.build_location }}
-        id: version
-
-      - name: Fetch libdeps, package debian source
-        working-directory: meshtasticd
-        run: debian/ci_pack_sdeb.sh
-        env:
-          SERIES: ${{ inputs.series }}
-          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
-          PKG_VERSION: ${{ steps.version.outputs.deb }}
-
-      - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
-          overwrite: true
-          path: |
-            meshtasticd_${{ steps.version.outputs.deb }}*

.github/workflows/build_docker.yml

@@ -1,51 +0,0 @@
-name: Build Docker
-
-on: workflow_call
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-native:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Docker login
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/login-action@v3
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
-
-      - name: Docker setup
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/setup-buildx-action@v3
-
-      - name: Docker build and push tagged versions
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        uses: docker/build-push-action@v6
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/meshtasticd:${{ steps.version.outputs.long }}
-
-      - name: Docker build and push
-        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/build-push-action@v6
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/meshtasticd:latest

.github/workflows/build_esp32.yml

@@ -7,31 +7,57 @@ on:
         required: true
         type: string
 
-permissions: read-all
-
 jobs:
   build-esp32:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
-        id: build
-        uses: ./.github/actions/build-variant
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware.bin
-          ota-firmware-target: release/bleota.bin
-          artifact-paths: |
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -14,24 +14,50 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-C3
-        id: build
-        uses: ./.github/actions/build-variant
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-c3.bin
+          target: release/bleota-c3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-C6
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c6:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C6
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -7,31 +7,55 @@ on:
         required: true
         type: string
 
-permissions: read-all
-
 jobs:
   build-esp32-s3:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-S3
-        id: build
-        uses: ./.github/actions/build-variant
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-s3.bin
-          ota-firmware-target: release/bleota-s3.bin
-          artifact-paths: |
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32s3

.github/workflows/build_native.yml

@@ -10,6 +10,12 @@ jobs:
   build-native:
     runs-on: ubuntu-latest
     steps:
+      - name: Install libs needed for native build
+        shell: bash
+        run: |
+          sudo apt-get update --fix-missing
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
       - name: Checkout code
         uses: actions/checkout@v4
         with:
@@ -17,22 +23,63 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - name: Setup native build
-        id: base
-        uses: ./.github/actions/setup-native
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
 
       - name: Build Native
         run: bin/build-native.sh
 
       - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-native-${{ steps.version.outputs.long }}.zip
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: |
             release/meshtasticd_linux_x86_64
             bin/config-dist.yaml
+
+      - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        uses: docker/login-action@v3
+        continue-on-error: true # FIXME: Failing docker login auth
+        with:
+          username: meshtastic
+          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
+
+      - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/setup-buildx-action@v3
+
+      - name: Docker build and push tagged versions
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
+
+      - name: Docker build and push
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:latest

.github/workflows/build_nrf52.yml

@@ -12,17 +12,24 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build NRF52
-        id: build
-        uses: ./.github/actions/build-variant
+        run: bin/build-nrf52.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-nrf52.sh
-          artifact-paths: |
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.hex
             release/*.uf2
             release/*.elf
             release/*.zip
-          arch: nrf52840

.github/workflows/build_raspbian.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
+          apt-get update -y --fix-missing
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
         uses: actions/checkout@v4
@@ -39,13 +39,13 @@ jobs:
         run: bin/build-native.sh
 
       - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-raspbian-${{ steps.version.outputs.long }}.zip
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: |
             release/meshtasticd_linux_aarch64

.github/workflows/build_raspbian_armv7l.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
+          apt-get update -y --fix-missing
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
         uses: actions/checkout@v4
@@ -39,13 +39,13 @@ jobs:
         run: bin/build-native.sh
 
       - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-raspbian-armv7l-${{ steps.version.outputs.long }}.zip
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: |
             release/meshtasticd_linux_armv7l

.github/workflows/build_rpi2040.yml

@@ -12,15 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build Raspberry Pi 2040
-        id: build
-        uses: ./.github/actions/build-variant
+        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-rpi2040.sh
-          artifact-paths: |
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.uf2
             release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -12,16 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build STM32WL
-        id: build
-        uses: ./.github/actions/build-variant
+      - name: Build STM32
+        run: bin/build-stm32.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-stm32.sh
-          artifact-paths: |
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.hex
             release/*.bin
-            release/*.elf
-          arch: stm32

.github/workflows/daily_packaging.yml

@@ -1,45 +0,0 @@
-name: Daily Packaging
-on:
-  schedule:
-    - cron: 0 9 * * *
-  workflow_dispatch:
-  push:
-    branches:
-      - master
-    paths:
-      - debian/**
-      - "*.rpkg"
-      - .github/workflows/nightly_packaging.yml
-      - .github/workflows/build_debian_src.yml
-      - .github/workflows/package_ppa.yml
-      - .github/workflows/package_obs.yml
-      - .github/workflows/hook_copr.yml
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  package-ppa:
-    strategy:
-      fail-fast: false
-      matrix:
-        series: [plucky, oracular, noble, jammy]
-    uses: ./.github/workflows/package_ppa.yml
-    with:
-      ppa_repo: ppa:meshtastic/daily
-      series: ${{ matrix.series }}
-    secrets: inherit
-
-  package-obs:
-    uses: ./.github/workflows/package_obs.yml
-    with:
-      obs_project: home:meshtastic:daily
-      series: unstable
-    secrets: inherit
-
-  hook-copr:
-    uses: ./.github/workflows/hook_copr.yml
-    with:
-      copr_project: daily
-    secrets: inherit

.github/workflows/generate-userprefs.yml

@@ -1,35 +0,0 @@
-name: Generate UsersPrefs JSON manifest
-
-on:
-  push:
-    paths:
-      - userPrefs.h
-    branches:
-      - master
-
-jobs:
-  generate-userprefs:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-
-      - name: Install Clang
-        run: sudo apt-get install -y clang
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Generate userPrefs.jsom
-        run: python3 ./bin/build-userprefs-json.py
-
-      - name: Trunk format json
-        run: trunk format userPrefs.json
-
-      - name: Commit userPrefs.json
-        run: |
-          git config --global user.email "actions@github.com"
-          git config --global user.name "GitHub Actions"
-          git add userPrefs.json
-          git commit -m "Update userPrefs.json"
-          git push

.github/workflows/hook_copr.yml

@@ -1,75 +0,0 @@
-name: Trigger COPR build
-
-on:
-  workflow_call:
-    secrets:
-      COPR_HOOK_DAILY:
-      COPR_HOOK_ALPHA:
-      COPR_HOOK_BETA:
-    inputs:
-      copr_project:
-        description: COPR project to target
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-copr-hook:
-    runs-on: ubuntu-24.04
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          ref: ${{ github.ref }}
-          repository: ${{ github.repository }}
-
-      - name: Install Python dependencies
-        run: |
-          pip install requests
-
-      - name: Trigger COPR build
-        shell: python
-        run: |
-          import requests
-
-          project_name = "${{ inputs.copr_project }}"
-          if project_name == "daily":
-              hook_secret = "${{ secrets.COPR_HOOK_DAILY }}"
-              project_id = 160277
-          elif project_name == "alpha":
-              hook_secret = "${{ secrets.COPR_HOOK_ALPHA }}"
-              project_id = 160278
-          elif project_name == "beta":
-              hook_secret = "${{ secrets.COPR_HOOK_BETA }}"
-              project_id = 160279
-          else:
-              raise ValueError(f"Unknown COPR project: {project_name}")
-
-          webhook_url = f"https://copr.fedorainfracloud.org/webhooks/github/{project_id}/{hook_secret}/meshtasticd/"
-          copr_payload = {
-            "event": "push",
-            "payload": {
-              "ref": "${{ github.ref }}",
-              "after": "${{ github.sha }}",
-              "repository": {
-                "id": "${{ github.repository_id }}",
-                "full_name": "${{ github.repository }}",
-                "git_url": "${{ github.repositoryUrl }}",
-                "owner": {
-                  "name": "${{ github.repository_owner }}"
-                }
-              },
-              "pusher": {
-                "name": "${{ github.actor }}"
-              },
-              "sender": {
-                "login": "github-actions[bot]"
-              }
-            }
-          }
-          r = requests.post(webhook_url, json=copr_payload)
-          r.raise_for_status()

.github/workflows/main_matrix.yml

@@ -1,7 +1,7 @@
 name: CI
-concurrency:
-  group: ci-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -24,7 +24,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, stm32, check]
     runs-on: ubuntu-latest
     steps:
       - id: checkout
@@ -32,18 +32,13 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "${{ github.head_ref }}" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
-          fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          echo "$TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
       esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
       esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
@@ -56,7 +51,6 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
       - uses: actions/checkout@v4
       - name: Build base
@@ -92,15 +86,6 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
-  build-esp32-c6:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_esp32_c6.yml
-    with:
-      board: ${{ matrix.board }}
-
   build-nrf52:
     needs: setup
     strategy:
@@ -137,24 +122,8 @@ jobs:
   package-native:
     uses: ./.github/workflows/package_amd64.yml
 
-  build-debian-src:
-    uses: ./.github/workflows/build_debian_src.yml
-    with:
-      series: UNRELEASED
-      build_location: local
-    secrets: inherit
-
-  test-native:
-    uses: ./.github/workflows/test_native.yml
-
-  build-docker:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/build_docker.yml
-    secrets: inherit
-
   after-checks:
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [check]
     steps:
       - name: Checkout code
@@ -167,20 +136,18 @@ jobs:
     permissions:
       contents: write
       pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
         build-esp32,
         build-esp32-s3,
         build-esp32-c3,
-        build-esp32-c6,
         build-nrf52,
         build-rpi2040,
         build-stm32,
+        package-raspbian,
+        package-raspbian-armv7l,
+        package-native,
       ]
     steps:
       - name: Checkout code
@@ -192,23 +159,22 @@ jobs:
       - uses: actions/download-artifact@v4
         with:
           path: ./
-          pattern: firmware-${{matrix.arch}}-*
           merge-multiple: true
 
       - name: Display structure of downloaded files
         run: ls -R
 
       - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          name: firmware-${{ steps.version.outputs.version }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -217,15 +183,16 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
+            ./meshtasticd_linux_*
+            ./config-dist.yaml
             ./littlefs-*.bin
-            ./littlefswebui-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
+          retention-days: 90
 
       - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          name: firmware-${{ steps.version.outputs.version }}
           merge-multiple: true
           path: ./output
 
@@ -239,36 +206,32 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
+      - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
+        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+        uses: gavv/pull-request-artifacts@v2.1.0
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
-          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
+          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          artifacts-repo: meshtastic/artifacts
+          artifacts-branch: device
+          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
 
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      [
-        gather-artifacts,
-        package-raspbian,
-        package-raspbian-armv7l,
-        package-native,
-        build-debian-src,
-      ]
+    needs: [gather-artifacts, after-checks]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -279,100 +242,23 @@ jobs:
           python-version: 3.x
 
       - name: Get release version string
-        run: |
-          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        id: version
-        env:
-          BUILD_LOCATION: local
-
-      - name: Create release
-        uses: softprops/action-gh-release@v2
-        id: create_release
-        with:
-          draft: true
-          prerelease: true
-          name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
-          tag_name: v${{ steps.version.outputs.long }}
-          body: |
-            Autogenerated by github action, developer should edit as required before publishing...
-
-      - name: Download deb files
-        uses: actions/download-artifact@v4
-        with:
-          pattern: meshtasticd_${{ steps.version.outputs.long }}_*.deb
-          merge-multiple: true
-          path: ./output
-
-      - name: Download source deb
-        uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
-          merge-multiple: true
-          path: ./output/debian-src
-
-      - name: Zip source deb
-        working-directory: output
-        run: zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add deb files to release
-        run: |
-          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd_${{ steps.version.outputs.long }}_arm64.deb
-          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd_${{ steps.version.outputs.long }}_armhf.deb
-          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd_${{ steps.version.outputs.long }}_amd64.deb
-          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Bump version.properties
-        run: >-
-          bin/bump_version.py
-
-      - name: Update debian changelog
-        run: >-
-          debian/ci_changelog.sh
-
-      - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v7
-        with:
-          title: Bump version.properties
-          add-paths: |
-            version.properties
-            debian/changelog
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
+          path: ./output
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
           merge-multiple: true
           path: ./output
 
       - name: Display structure of downloaded files
-        run: ls -lR
+        run: ls -R
 
       - name: Device scripts permissions
         run: |
@@ -380,24 +266,90 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
 
       - uses: actions/download-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
           merge-multiple: true
           path: ./elfs
 
-      - name: Zip debug elfs
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
+      - name: Zip Elfs
+        run: zip -j -9 -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
 
       # For diagnostics
-      - name: Display structure of downloaded files
+      - name: Show artifacts
         run: ls -lR
 
-      - name: Add bins and debug elfs to release
-        run: |
-          gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
-          gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+      - name: Create release
+        uses: actions/create-release@v1
+        id: create_release
+        with:
+          draft: true
+          prerelease: true
+          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
+          tag_name: v${{ steps.version.outputs.version }}
+          body: |
+            Autogenerated by github action, developer should edit as required before publishing...
         env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          GITHUB_TOKEN: ${{ github.token }}
+
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
+
+      - name: Add raspbian aarch64 .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
+      - name: Add raspbian armv7l .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_content_type: application/vnd.debian.binary-package
+
+      - name: Add raspbian amd64 .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          asset_content_type: application/vnd.debian.binary-package
+
+      - name: Bump version.properties
+        run: >-
+          bin/bump_version.py
+
+      - name: Create version.properties pull request
+        uses: peter-evans/create-pull-request@v6
+        with:
+          add-paths: |
+            version.properties

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-native
     steps:
       - name: Checkout code
@@ -32,13 +32,13 @@ jobs:
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download artifacts
         uses: actions/download-artifact@v4
         with:
-          name: firmware-native-${{ steps.version.outputs.long }}.zip
+          name: firmware-native-${{ steps.version.outputs.version }}.zip
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -47,44 +47,32 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/meshtasticd/web
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
-          shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
-          gunzip .debpkg/usr/share/meshtasticd/web/ -r
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
-          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
-          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
-          chmod +x .debpkg/DEBIAN/preinst
-          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
-          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:
           package: meshtasticd
           package_root: .debpkg
           maintainer: Jonathan Bennett
-          version: ${{ steps.version.outputs.long }} # refs/tags/v*.*.*
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: amd64
-          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4
         with:
-          name: meshtasticd_${{ steps.version.outputs.long }}_amd64.deb
+          name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
           overwrite: true
           path: |
             ./*.deb

.github/workflows/package_obs.yml

@@ -1,110 +0,0 @@
-name: Package for OpenSUSE Build Service
-
-on:
-  workflow_call:
-    secrets:
-      OBS_PASSWORD:
-        required: true
-      PPA_GPG_PRIVATE_KEY:
-        required: true
-    inputs:
-      obs_project:
-        description: Meshtastic OBS project to target
-        required: true
-        type: string
-      series:
-        description: Debian series to target
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-debian-src:
-    uses: ./.github/workflows/build_debian_src.yml
-    secrets: inherit
-    with:
-      series: ${{ inputs.series }}
-      build_location: obs
-
-  package-obs:
-    runs-on: ubuntu-24.04
-    needs: build-debian-src
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install OpenSUSE Build Service deps
-        shell: bash
-        run: |
-          echo 'deb http://download.opensuse.org/repositories/openSUSE:/Tools/xUbuntu_24.04/ /' | sudo tee /etc/apt/sources.list.d/openSUSE:Tools.list
-          curl -fsSL https://download.opensuse.org/repositories/openSUSE:Tools/xUbuntu_24.04/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/openSUSE_Tools.gpg > /dev/null
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y osc
-
-      - name: Get release version string
-        working-directory: meshtasticd
-        run: |
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        env:
-          BUILD_LOCATION: obs
-        id: version
-
-      - name: Download artifacts
-        uses: actions/download-artifact@v4
-        with:
-          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -lah
-
-      - name: Configure osc
-        env:
-          OBS_USERNAME: meshtastic
-        run: |
-          # Setup OpenSUSE Build Service credentials
-          mkdir -p ~/.config/osc
-          echo "[general]" > ~/.config/osc/oscrc
-          echo "apiurl=https://api.opensuse.org" >> ~/.config/osc/oscrc
-          echo "[https://api.opensuse.org]" >> ~/.config/osc/oscrc
-          echo "user=${{ env.OBS_USERNAME }}" >> ~/.config/osc/oscrc
-          echo "pass=${{ secrets.OBS_PASSWORD }}" >> ~/.config/osc/oscrc
-          echo "credentials_mgr_class=osc.credentials.PlaintextConfigFileCredentialsManager" >> ~/.config/osc/oscrc
-          # Create a temporary directory for osc checkout
-          mkdir -p osc
-
-      # Intentionally fail if credentials are invalid
-      # Update secrets if this returns `401`
-      - name: Verify OBS authentication
-        run: osc token
-
-      - name: Upload package to OBS
-        shell: bash
-        working-directory: osc
-        env:
-          OBS_PROJECT: ${{ inputs.obs_project }}
-          OBS_PACKAGE: meshtasticd
-        run: |
-          # Initialize the package in the current directory
-          osc checkout --output-dir . $OBS_PROJECT $OBS_PACKAGE
-
-          # Remove the existing package files
-          rm -rf *.dsc *.tar.xz
-
-          # Copy new package files to the directory
-          cp $GITHUB_WORKSPACE/*.dsc .
-          cp $GITHUB_WORKSPACE/*.tar.xz .
-
-          # Add/Remove the files
-          osc addremove
-
-          # Commit changes and push to OpenSUSE Build Service
-          osc commit -m "GitHub Actions: ${{ steps.version.outputs.deb }}~${{ inputs.series }}"

.github/workflows/package_ppa.yml

@@ -1,74 +0,0 @@
-name: Package for Launchpad PPA
-
-on:
-  workflow_call:
-    secrets:
-      PPA_GPG_PRIVATE_KEY:
-        required: true
-    inputs:
-      ppa_repo:
-        description: Meshtastic PPA to target
-        required: true
-        type: string
-      series:
-        description: Ubuntu series to target
-        required: true
-        type: string
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-debian-src:
-    uses: ./.github/workflows/build_debian_src.yml
-    secrets: inherit
-    with:
-      series: ${{ inputs.series }}
-      build_location: ppa
-
-  package-ppa:
-    runs-on: ubuntu-24.04
-    needs: build-debian-src
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          path: meshtasticd
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install deps
-        shell: bash
-        run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y dput
-
-      - name: Import GPG key
-        uses: crazy-max/ghaction-import-gpg@v6
-        with:
-          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
-        id: gpg
-
-      - name: Get release version string
-        working-directory: meshtasticd
-        run: |
-          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
-        env:
-          BUILD_LOCATION: ppa
-        id: version
-
-      - name: Download artifacts
-        uses: actions/download-artifact@v4
-        with:
-          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
-          merge-multiple: true
-
-      - name: Display structure of downloaded files
-        run: ls -lah
-
-      - name: Publish with dput
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        run: |
-          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian
     steps:
       - name: Checkout code
@@ -32,13 +32,13 @@ jobs:
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download artifacts
         uses: actions/download-artifact@v4
         with:
-          name: firmware-raspbian-${{ steps.version.outputs.long }}.zip
+          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -47,44 +47,32 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/meshtasticd/web
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
-          shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
-          gunzip .debpkg/usr/share/meshtasticd/web/ -r
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
-          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
-          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
-          chmod +x .debpkg/DEBIAN/preinst
-          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
-          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:
           package: meshtasticd
           package_root: .debpkg
           maintainer: Jonathan Bennett
-          version: ${{ steps.version.outputs.long }} # refs/tags/v*.*.*
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: arm64
-          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4
         with:
-          name: meshtasticd_${{ steps.version.outputs.long }}_arm64.deb
+          name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
           overwrite: true
           path: |
             ./*.deb

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code
@@ -32,13 +32,13 @@ jobs:
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download artifacts
         uses: actions/download-artifact@v4
         with:
-          name: firmware-raspbian-armv7l-${{ steps.version.outputs.long }}.zip
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -47,44 +47,32 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/meshtasticd/web
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
-          shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
-          gunzip .debpkg/usr/share/meshtasticd/web/ -r
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
-          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
-          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
-          chmod +x .debpkg/DEBIAN/preinst
-          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
-          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:
           package: meshtasticd
           package_root: .debpkg
           maintainer: Jonathan Bennett
-          version: ${{ steps.version.outputs.long }} # refs/tags/v*.*.*
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: armhf
-          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4
         with:
-          name: meshtasticd_${{ steps.version.outputs.long }}_armhf.deb
+          name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
           overwrite: true
           path: |
             ./*.deb

.github/workflows/release_channels.yml

@@ -1,36 +0,0 @@
-name: Trigger release workflows upon Publish
-
-on:
-  release:
-    types: [published, released]
-
-permissions: read-all
-
-jobs:
-  package-ppa:
-    strategy:
-      fail-fast: false
-      matrix:
-        series: [plucky, oracular, noble, jammy]
-    uses: ./.github/workflows/package_ppa.yml
-    with:
-      ppa_repo: |-
-        ppa:meshtastic/${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
-      series: ${{ matrix.series }}
-    secrets: inherit
-
-  package-obs:
-    uses: ./.github/workflows/package_obs.yml
-    with:
-      obs_project: |-
-        home:meshtastic:${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
-      series: |-
-        ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
-    secrets: inherit
-
-  # hook-copr:
-  #   uses: ./.github/workflows/hook_copr.yml
-  #   with:
-  #     copr_project: |-
-  #       ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
-  #   secrets: inherit

.github/workflows/sec_sast_semgrep_cron.yml

@@ -12,7 +12,7 @@ jobs:
   semgrep-full:
     runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,9 +4,9 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/stale_bot.yml

@@ -1,22 +0,0 @@
-name: process stale Issues and PR's
-on:
-  schedule:
-    - cron: 0 6 * * *
-  workflow_dispatch: {}
-
-permissions:
-  issues: write
-  pull-requests: write
-  actions: write
-
-jobs:
-  stale_issues:
-    name: Close Stale Issues
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Stale PR+Issues
-        uses: actions/stale@v9.0.0
-        with:
-          exempt-issue-labels: pinned,3.0
-          exempt-pr-labels: pinned,3.0

.github/workflows/test_native.yml

@@ -1,169 +0,0 @@
-name: Run Tests on Native platform
-
-on:
-  workflow_call:
-  workflow_dispatch:
-
-permissions: {}
-
-env:
-  LCOV_CAPTURE_FLAGS: --quiet --capture --include "${PWD}/src/*" --exclude '*/src/mesh/generated/*' --directory .pio/build/coverage/src --base-directory "${PWD}"
-
-jobs:
-  simulator-tests:
-    name: Native Simulator Tests
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-          submodules: recursive
-
-      - name: Setup native build
-        id: base
-        uses: ./.github/actions/setup-native
-
-      - name: Install simulator dependencies
-        run: pip install -U dotmap
-
-      # We now run integration test before other build steps (to quickly see runtime failures)
-      - name: Build for native/coverage
-        run: platformio run -e coverage
-
-      - name: Capture initial coverage information
-        shell: bash
-        run: |
-          sudo apt-get install -y lcov
-          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --initial --output-file coverage_base.info
-          sed -i -e "s#${PWD}#.#" coverage_base.info # Make paths relative.
-
-      - name: Integration test
-        run: |
-          .pio/build/coverage/program &
-          PID=$!
-          timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
-          echo "Simulator started, launching python test..."
-          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
-          wait
-
-      - name: Capture coverage information
-        if: always() # run this step even if previous step failed
-        run: |
-          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name integration --output-file coverage_integration.info
-          sed -i -e "s#${PWD}#.#" coverage_integration.info # Make paths relative.
-
-      - name: Get release version string
-        if: always() # run this step even if previous step failed
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Save coverage information
-        uses: actions/upload-artifact@v4
-        if: always() # run this step even if previous step failed
-        with:
-          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: ./coverage_*.info
-
-  platformio-tests:
-    name: Native PlatformIO Tests
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-          submodules: recursive
-
-      - name: Setup native build
-        id: base
-        uses: ./.github/actions/setup-native
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      # Disable (comment-out) BUILD_EPOCH. It causes a full rebuild between tests and resets the
-      # coverage information each time.
-      - name: Disable BUILD_EPOCH
-        run: sed -i 's/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
-      - name: PlatformIO Tests
-        run: platformio test -e coverage -v --junit-output-path testreport.xml
-
-      - name: Save test results
-        if: always() # run this step even if previous step failed
-        uses: actions/upload-artifact@v4
-        with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: ./testreport.xml
-
-      - name: Capture coverage information
-        if: always() # run this step even if previous step failed
-        run: |
-          sudo apt-get install -y lcov
-          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name tests --output-file coverage_tests.info
-          sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
-
-      - name: Save coverage information
-        uses: actions/upload-artifact@v4
-        if: always() # run this step even if previous step failed
-        with:
-          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
-          overwrite: true
-          path: ./coverage_*.info
-
-  generate-reports:
-    name: Generate Test Reports
-    runs-on: ubuntu-latest
-    permissions: # Needed for dorny/test-reporter.
-      contents: read
-      actions: read
-      checks: write
-    needs:
-      - simulator-tests
-      - platformio-tests
-    if: always()
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Download test artifacts
-        uses: actions/download-artifact@v4
-        with:
-          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
-          merge-multiple: true
-
-      - name: Test Report
-        uses: dorny/test-reporter@v1.9.1
-        with:
-          name: PlatformIO Tests
-          path: testreport.xml
-          reporter: java-junit
-
-      - name: Download coverage artifacts
-        uses: actions/download-artifact@v4
-        with:
-          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
-          path: code-coverage-report
-          merge-multiple: true
-
-      - name: Generate Code Coverage Report
-        run: |
-          sudo apt-get install -y lcov
-          lcov --quiet --add-tracefile code-coverage-report/coverage_base.info --add-tracefile code-coverage-report/coverage_integration.info --add-tracefile code-coverage-report/coverage_tests.info --output-file code-coverage-report/coverage_src.info
-          genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
-
-      - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v4
-        with:
-          name: code-coverage-report-${{ steps.version.outputs.long }}.zip
-          path: code-coverage-report

.github/workflows/tests.yml

@@ -6,54 +6,86 @@ on:
   workflow_dispatch: {}
 
 jobs:
-  native-tests:
-    uses: ./.github/workflows/test_native.yml
-
-  hardware-tests:
-    runs-on: test-runner
+  test-simulator:
+    runs-on: ubuntu-latest
     steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          sudo apt-get update --fix-missing
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
       - name: Checkout code
         uses: actions/checkout@v4
+        with:
+          submodules: recursive
 
-      # - uses: actions/setup-python@v5
-      #   with:
-      #     python-version: '3.10'
-
-      # pipx install "setuptools<72"
       - name: Upgrade python tools
         shell: bash
         run: |
-          pipx install adafruit-nrfutil
-          pipx install poetry
-          pipx install meshtastic --pip-args=--pre
-
-      - name: Install PlatformIO from script
-        shell: bash
-        run: |
-          curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
-          python3 get-platformio.py
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
 
       - name: Upgrade platformio
         shell: bash
         run: |
-          export PATH=$PATH:$HOME/.local/bin
           pio upgrade
 
-      - name: Setup Node
-        uses: actions/setup-node@v4
+      - name: Build Native
+        run: bin/build-native.sh
+
+      # We now run integration test before other build steps (to quickly see runtime failures)
+      - name: Build for native
+        run: platformio run -e native
+
+      - name: Integration test
+        run: |
+          .pio/build/native/program & sleep 10 # 5 seconds was not enough
+          echo "Simulator started, launching python test..."
+          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+      - name: PlatformIO Tests
+        run: platformio test -e native --junit-output-path testreport.xml
+
+      - name: Test Report
+        uses: dorny/test-reporter@v1.9.1
+        if: success() || failure() # run this step even if previous step failed
         with:
-          node-version: 18
+          name: PlatformIO Tests
+          path: testreport.xml
+          reporter: java-junit
+
+  hardware-tests:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
+          pip install -U platformio adafruit-nrfutil --no-build-isolation
+          pip install -U poetry --no-build-isolation
+          pip install -U meshtastic --pre --no-build-isolation
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
 
       - name: Setup pnpm
-        uses: pnpm/action-setup@v4
+        uses: pnpm/action-setup@v2
         with:
           version: latest
 
-      - name: Install dependencies, setup devices and run
-        shell: bash
-        run: |
-          git submodule update --init --recursive
-          cd meshtestic/
-          pnpm install
-          pnpm run setup
-          pnpm run test
+      - name: Install Dependencies
+        run: pnpm install
+
+      - name: Setup devices
+        run: pnpm run setup
+
+      - name: Execute end to end tests on connected hardware
+        run: pnpm run test

.github/workflows/trunk_format_pr.yml

@@ -1,47 +0,0 @@
-name: Run Trunk Fmt on PR Comment
-
-on:
-  issue_comment:
-    types: [created]
-
-jobs:
-  trunk-fmt:
-    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Run Trunk Fmt
-        run: trunk fmt
-
-      - name: Get release version string
-        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Commit and push changes
-        run: |
-          git config --global user.name "github-actions[bot]"
-          git config --global user.email "github-actions[bot]@users.noreply.github.com"
-          git add .
-          git commit -m "Add firmware version ${{ steps.version.outputs.long }}"
-          git push
-
-      - name: Comment on PR
-        uses: actions/github-script@v7
-        with:
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-          script: |
-            github.issues.createComment({
-              issue_number: context.issue.number,
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              body: '`trunk fmt` has been run on this PR.'
-            })

.github/workflows/update_protobufs.yml

@@ -1,4 +1,4 @@
-name: Update protobufs and regenerate classes
+name: "Update protobufs and regenerate classes"
 on: workflow_dispatch
 
 jobs:
@@ -12,24 +12,22 @@ jobs:
           submodules: true
 
       - name: Update submodule
-        if: ${{ github.ref == 'refs/heads/master' }}
         run: |
           git submodule update --remote protobufs
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9.1-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.9.1-linux-x86.tar.gz
-          mv nanopb-0.4.9.1-linux-x86 nanopb-0.4.9
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
 
       - name: Re-generate protocol buffers
         run: |
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v6
         with:
-          title: Update protobufs and classes
           add-paths: |
             protobufs
             src/mesh

.gitignore

@@ -1,8 +1,6 @@
 .pio
-pio
-pio.tar
-web
-web.tar
+main/configuration.h
+main/credentials.h
 
 # ignore vscode IDE settings files
 .vscode/*

.trunk/trunk.yaml

@@ -1,37 +1,36 @@
 version: 0.1
 cli:
-  version: 1.22.8
+  version: 1.22.3
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.6
+      ref: v1.6.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - prettier@3.4.2
-    - trufflehog@3.86.1
+    - trufflehog@3.81.9
     - yamllint@1.35.1
-    - bandit@1.8.0
-    - checkov@3.2.334
-    - terrascan@1.19.9
-    - trivy@0.58.0
+    - bandit@1.7.9
+    - checkov@3.2.238
+    - terrascan@1.19.1
+    - trivy@0.54.1
     #- trufflehog@3.63.2-rc0
     - taplo@0.9.3
-    - ruff@0.8.3
+    - ruff@0.6.2
     - isort@5.13.2
-    - markdownlint@0.43.0
-    - oxipng@9.1.3
+    - markdownlint@0.41.0
+    - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.4
+    - actionlint@1.7.1
     - flake8@7.1.1
-    - hadolint@2.12.1-beta
+    - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.10.0
+    - black@24.8.0
     - git-diff-check
-    - gitleaks@8.21.2
+    - gitleaks@8.18.4
     - clang-format@16.0.3
-    #- prettier@3.3.3
+    - prettier@3.3.3
   ignore:
     - linters: [ALL]
       paths:
@@ -40,7 +39,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@18.20.5
+    - node@18.12.1
 actions:
   disabled:
     - trunk-announce

CODE_OF_CONDUCT.md

@@ -1,4 +0,0 @@
-# Contributor Covenant Code of Conduct
-
-The Meshtastic Firmware project is subject to the code of conduct for the parent project, which can be found here:
-https://meshtastic.org/docs/legal/conduct/

Dockerfile

@@ -1,29 +1,32 @@
-# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore-all(hadolint/DL3008): Use latest version of apt packages for buildchain
-# trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
+FROM debian:bookworm-slim AS builder
 
-FROM python:3.12-bookworm AS builder
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
-# Install Dependencies
-ENV PIP_ROOT_USER_ACTION=ignore
-RUN apt-get update && apt-get install --no-install-recommends -y wget g++ zip git ca-certificates \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config && \
-    apt-get clean && rm -rf /var/lib/apt/lists/* && \
-    pip install --no-cache-dir -U platformio==6.1.16 && \
-    mkdir /tmp/firmware
+# http://bugs.python.org/issue19846
+# > At the moment, setting "LANG=C" on a Linux system *fundamentally breaks Python 3*, and that's not OK.
+ENV LANG C.UTF-8
+
+# Install build deps
+USER root
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
+                           ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
+                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
+
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
+USER mesh
 
-# Copy source code
 WORKDIR /tmp/firmware
-COPY . /tmp/firmware
-
-# Build
-RUN bash ./bin/build-native.sh && \
-    cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+RUN python3 -m venv /tmp/firmware 
+RUN bash -o pipefail -c "source bin/activate; pip3 install --no-cache-dir -U platformio==6.1.15"
+# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
+COPY --chown=mesh:mesh . /tmp/firmware
+RUN bash -o pipefail -c "source ./bin/activate && bash ./bin/build-native.sh"
+RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 
 ##### PRODUCTION BUILD #############
@@ -32,25 +35,20 @@ FROM debian:bookworm-slim
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
-# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
-USER root
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/*
 
-RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 && \
-    apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && mkdir -p /var/lib/meshtasticd \
-    && mkdir -p /etc/meshtasticd/config.d
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
+USER mesh
 
-# Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
-# Copy config templates
-COPY ./bin/config.d /etc/meshtasticd/available.d
+WORKDIR /home/mesh
+COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/
 
-WORKDIR /var/lib/meshtasticd
-VOLUME /var/lib/meshtasticd
+RUN mkdir data
+VOLUME /home/mesh/data
 
-# Expose Meshtastic TCP API port from the host
-EXPOSE 4403
+CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]
 
-CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
-
-HEALTHCHECK NONE
+HEALTHCHECK NONE

SECURITY.md

@@ -1,12 +0,0 @@
-# Security Policy
-
-## Supported Versions
-
-| Firmware Version | Supported          |
-| ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
-
-## Reporting a Vulnerability
-
-We support the private reporting of potential security vulnerabilities. Please go to the Security tab to file a report with a description of the potential vulnerability and reproduction scripts (preferred) or steps, and our developers will review.

alpine.Dockerfile

@@ -1,42 +0,0 @@
-# trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
-
-FROM python:3.12-alpine3.21 AS builder
-
-ENV PIP_ROOT_USER_ACTION=ignore
-RUN apk add bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone && \
-    pip install --no-cache-dir -U platformio==6.1.16 && \
-    mkdir /tmp/firmware
-
-WORKDIR /tmp/firmware
-COPY . /tmp/firmware
-
-# Create small package (no debugging symbols)
-# Add `argp` for musl
-ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
-
-RUN bash ./bin/build-native.sh && \
-    cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
-
-# ##### PRODUCTION BUILD #############
-
-FROM alpine:3.21
-
-# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
-USER root
-
-RUN apk add libstdc++ libgpiod yaml-cpp libusb i2c-tools \
-    && mkdir -p /var/lib/meshtasticd \
-    && mkdir -p /etc/meshtasticd/config.d
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
-
-WORKDIR /var/lib/meshtasticd
-VOLUME /var/lib/meshtasticd
-
-EXPOSE 4403
-
-CMD [ "sh",  "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
-
-HEALTHCHECK NONE

arch/esp32/esp32.ini

@@ -2,10 +2,10 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.9.0
+platform = platformio/espressif32@6.7.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -31,7 +31,7 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
   -DLIBPAX_ARDUINO
@@ -43,11 +43,10 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.2
-  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
-  lewisxhe/XPowersLib@^0.2.6
+  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
   rweather/Crypto@^0.4.0
 

arch/esp32/esp32c6.ini

@@ -1,41 +0,0 @@
-[esp32c6_base]
-extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
-build_flags =
-  ${arduino_base.build_flags}
-  -Wall
-  -Wextra
-  -Isrc/platform/esp32
-  -std=c++11
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DSERIAL_BUFFER_SIZE=4096
-  -DLIBPAX_ARDUINO
-  -DLIBPAX_WIFI
-  -DLIBPAX_BLE
-  -DMESHTASTIC_EXCLUDE_WEBSERVER
-  ;-DDEBUG_HEAP
-  ; TEMP
-  -DHAS_BLUETOOTH=0
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  lewisxhe/XPowersLib@^0.2.6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
-
-build_src_filter = 
- ${esp32_base.build_src_filter} -<mesh/http> 
-
-monitor_speed = 460800
-monitor_filters = esp32_c3_exception_decoder
-
-lib_ignore =
-  NonBlockingRTTTL
-  NimBLE-Arduino
-  libpax
-  

arch/nrf52/nrf52.ini

@@ -1,11 +1,10 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.7.0
+platform = platformio/nordicnrf52@^10.5.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   framework-arduinoadafruitnrf52 @ https://github.com/geeksville/Adafruit_nRF52_Arduino.git
-  toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
 build_flags =
@@ -15,18 +14,13 @@ build_flags =
   -Wno-unused-variable
   -Isrc/platform/nrf52
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
-  -DMESHTASTIC_EXCLUDE_AUDIO=1
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -DMAX_NUM_NODES=80
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}
-  ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
 
 lib_ignore =
-  BluetoothOTA
-  lvgl
+  BluetoothOTA

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
-; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
+; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
+platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
 framework = arduino
 
 build_src_filter = 
@@ -9,7 +9,7 @@ build_src_filter =
   -<nimble/> 
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
-  -<platform/rp2xx0>
+  -<platform/rp2040>
   -<mesh/wifi/>
   -<mesh/http/>
   +<mesh/raspihttp/>
@@ -23,10 +23,8 @@ build_src_filter =
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
-  ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
-  lovyan03/LovyanGFX@^1.2.0
-  https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
+  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
 
 build_flags =
   ${arduino_base.build_flags}
@@ -34,10 +32,6 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -lpthread
-  -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
-  -li2c
-  -std=c++17

arch/rp2040/rp2040.ini

@@ -1,16 +1,14 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
-  -Isrc/platform/rp2xx0
-  -Isrc/platform/rp2xx0/hardware_rosc/include
-  -Isrc/platform/rp2xx0/pico_sleep/include
+  ${arduino_base.build_flags} -Wno-unused-variable 
+  -Isrc/platform/rp2040
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
@@ -22,5 +20,4 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
   rweather/Crypto

arch/rp2xx0/rp2350.ini

@@ -1,25 +0,0 @@
-; Common settings for rp2040 Processor based targets
-[rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
-extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
-
-board_build.core = earlephilhower
-board_build.filesystem_size = 0.5m
-build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
-  -Isrc/platform/rp2xx0
-  -D__PLAT_RP2350__
-#  -D _POSIX_THREADS
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>
-
-lib_ignore =
-  BluetoothOTA
-  lvgl
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  rweather/Crypto

arch/stm32/stm32.ini

@@ -1,7 +1,7 @@
 [stm32_base]
 extends = arduino_base
 platform = ststm32
-platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#ea74156acd823b6d14739f389e6cdc648f8ee36e
+platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#361a7fdb67e2a7104e99b4f42a802469eef8b129
 
 build_type = release
 
@@ -22,7 +22,7 @@ build_flags =
   -fdata-sections
   
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
@@ -30,9 +30,8 @@ upload_protocol = stlink
 lib_deps =
   ${env.lib_deps}
   charlesbaynham/OSFS@^1.2.3
-  jgromes/RadioLib@7.0.2
   https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
-  mathertel/OneButton@2.6.1
+  https://github.com/mathertel/OneButton@~2.6.1
   Wire

bin/.gitignore

@@ -1 +0,0 @@
-config.yaml

bin/base64_to_hex.py

@@ -1,33 +0,0 @@
-import sys
-import base64
-
-def base64_to_hex_string(b64_string):
-    try:
-        # Decode the Base64 string to raw bytes
-        decoded_bytes = base64.b64decode(b64_string)
-    except Exception as e:
-        raise ValueError(f"Invalid Base64 input: {e}")
-    
-    # Check if the decoded result is exactly 32 bytes
-    if len(decoded_bytes) != 32:
-        raise ValueError("Decoded Base64 input must be exactly 32 bytes.")
-    
-    # Convert each byte to its hex representation
-    hex_values = [f"0x{byte:02x}" for byte in decoded_bytes]
-    
-    # Join the formatted hex values with commas
-    formatted_output = "{ " + ", ".join(hex_values) + " };"
-    return formatted_output
-
-if __name__ == "__main__":
-    # Check if a Base64 string was provided in command line arguments
-    if len(sys.argv) != 2:
-        print("Usage: python script.py <base64-string>")
-        sys.exit(1)
-    
-    b64_string = sys.argv[1]
-    try:
-        formatted_hex = base64_to_hex_string(b64_string)
-        print(formatted_hex)
-    except ValueError as e:
-        print(e)

bin/build-esp32.sh

@@ -35,11 +35,6 @@ cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
 pio run --environment $1 -t buildfs
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$VERSION.bin
-# Remove webserver files from the filesystem and rebuild
-ls -l data/static # Diagnostic list of files
-rm -rf data/static
-pio run --environment $1 -t buildfs
 cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -27,4 +27,5 @@ rm -r $OUTDIR/* || true
 platformio pkg update --environment native || platformioFailed
 pio run --environment native || platformioFailed
 cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
-cp bin/native-install.* $OUTDIR
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-userprefs-json.py

@@ -1,48 +0,0 @@
-import json
-import subprocess
-import re
-
-def get_macros_from_header(header_file):
-    # Run clang to preprocess the header file and capture the output
-    result = subprocess.run(['clang', '-E', '-dM', header_file], capture_output=True, text=True)
-    if result.returncode != 0:
-        raise RuntimeError(f"Clang preprocessing failed: {result.stderr}")
-
-    # Extract macros from the output
-    macros = {}
-    macro_pattern = re.compile(r'#define\s+(\w+)\s+(.*)')
-    for line in result.stdout.splitlines():
-        match = macro_pattern.match(line) 
-        if match and 'USERPREFS_' in line and '_USERPREFS_' not in line:
-            macros[match.group(1)] = match.group(2)
-
-    return macros
-
-def write_macros_to_json(macros, output_file):
-    with open(output_file, 'w') as f:
-        json.dump(macros, f, indent=4)
-
-def main():
-    header_file = 'userPrefs.h'
-    output_file = 'userPrefs.jsonc'
-    # Uncomment all macros in the header file
-    with open(header_file, 'r') as file:
-        lines = file.readlines()
-
-    uncommented_lines = []
-    for line in lines:
-        stripped_line = line.strip().replace('/*', '').replace('*/', '')
-        if stripped_line.startswith('//') and 'USERPREFS_' in stripped_line:
-            # Replace "//"
-            stripped_line = stripped_line.replace('//', '')
-        uncommented_lines.append(stripped_line + '\n')
-
-    with open(header_file, 'w') as file:
-        for line in uncommented_lines:
-                file.write(line)
-    macros = get_macros_from_header(header_file)
-    write_macros_to_json(macros, output_file)
-    print(f"Macros have been written to {output_file}")
-
-if __name__ == "__main__":
-    main()

bin/config-dist.yaml

@@ -1,17 +1,32 @@
-### Many device configs have been moved to /etc/meshtasticd/available.d
-### To activate, simply copy or link the appropriate file into /etc/meshtasticd/config.d
-
 ### Define your devices here using Broadcom pin numbering
 ### Uncomment the block that corresponds to your hardware
 ### Including the "Module:" line!
 ---
 Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
 #  IRQ: 17
 #  Reset: 22
 
+#  Module: sx1262  # pinedio
+#  CS: 0
+#  IRQ: 10
+#  Busy: 11
+#  spidev: spidev0.1
+
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23
+
 #  Module: RF95  # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html
 #  Reset: 22
 #  CS: 7
@@ -23,47 +38,6 @@ Lora:
 #  Busy: 20
 #  Reset: 18
 
-### The Radxa Zero 3E/W employs multiple gpio chips.
-### Each gpio pin must be unique, but can be assigned to a specific gpio chip and line.
-### In case solely a no. is given, the default gpio chip and pin == line will be employed.
-###
-#  Module: sx1262  # Radxa Zero 3E/W + Ebyte E22-900M30S
-#  DIO2_AS_RF_SWITCH: true
-#  DIO3_TCXO_VOLTAGE: 1.8
-#  CS:             # NSS     PIN_24 -> chip 4, line 22
-#    pin: 24
-#    gpiochip: 4
-#    line: 22
-#  SCK:            # SCK     PIN_23 -> chip 4, line 18
-#    pin: 23
-#    gpiochip: 4
-#    line: 18
-#  Busy:           # BUSY    PIN_29 -> chip 3!, line 11
-#    pin: 29
-#    gpiochip: 3
-#    line: 11
-#  MOSI:           # MOSI    PIN_19 -> chip 4, line 19
-#    pin: 19
-#    gpiochip: 4
-#    line: 19
-#  MISO:           # MISO    PIN_21 -> chip 4, line 21
-#    pin: 21
-#    gpiochip: 4
-#    line: 21
-#  Reset:          # NRST    PIN_27 -> chip 4, line 10
-#    pin: 27
-#    gpiochip: 4
-#    line: 10
-#  IRQ:            # DIO1    PIN_28 -> chip 4, line 11
-#    pin: 28
-#    gpiochip: 4
-#    line: 11
-#  RXen:           # RXEN    PIN_22 -> chip 3!, line 17
-#    pin: 22
-#    gpiochip: 3
-#    line: 17
-#  TXen: RADIOLIB_NC # TXEN   no PIN, no line, fallback to default gpio chip
-
 #  Module: sx1268  # SX1268-based modules, tested with Ebyte E22 400M33S
 #  CS: 21
 #  IRQ: 16
@@ -78,9 +52,11 @@ Lora:
 #  TXen: x  # TX and RX enable pins
 #  RXen: x
 
+#  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
+
 #  spiSpeed: 2000000
 
-### Set default/fallback gpio chip to use in /dev/. Defaults to 0.
+### Set gpio chip to use in /dev/. Defaults to 0.
 ### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
 #  gpiochip: 4
 
@@ -107,6 +83,17 @@ I2C:
 
 Display:
 
+### Waveshare 2.8inch RPi LCD
+#  Panel: ST7789
+#  CS: 8
+#  DC: 22        # Data/Command pin
+#  Backlight: 18
+#  Width: 240
+#  Height: 320
+#  Reset: 27
+#  Rotate: true
+#  Invert: true
+
 ### Waveshare 1.44inch LCD HAT
 #  Panel: ST7735S
 #  CS: 8         #Chip Select
@@ -126,29 +113,6 @@ Display:
 #  Height: 320
 #  Rotate: true
 
-### SHCHV 3.5 RPi TFT+Touchscreen
-#  Panel: ILI9486
-#  spidev: spidev0.0
-#  BusFrequency: 30000000
-#  DC: 24
-#  Reset: 25
-#  Width: 320
-#  Height: 480
-#  OffsetRotate: 2
-
-### TZT 2.0 Inch TFT Display ST7789V 240RGBx320
-#  Panel: ST7789
-#  spidev: spidev0.0
-#  # CS: 8     # can be freely chosen
-#  BusFrequency: 80000000
-#  DC: 24      # can be freely chosen
-#  Width: 320
-#  Height: 240
-#  Reset: 25   # can be freely chosen
-#  Rotate: true
-#  OffsetRotate: 1
-#  Invert: true
-
 ### You can also specify the spi device for the display to use
 # spidev: spidev0.0
 
@@ -163,6 +127,10 @@ Touchscreen:
 #  IRQ: 24
 #  I2CAddr: 0x38
 
+#  Module: XPT2046 # Waveshare 2.8inch
+#  CS: 7
+#  IRQ: 17
+
 ### You can also specify the spi device for the touchscreen to use
 # spidev: spidev0.0
 
@@ -181,11 +149,8 @@ Logging:
 
 Webserver:
 #  Port: 443 # Port for Webserver & Webservices
-#  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
+#  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
 
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
-  ConfigDirectory: /etc/meshtasticd/config.d/
-#  MACAddress: AA:BB:CC:DD:EE:FF
-#  MACAddressSource: eth0

bin/config.d/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml

@@ -1,9 +0,0 @@
-##  https://www.mikroe.com/lr-iot-click
-Lora:
-  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
-#  CS: 25
-  IRQ: 10
-  Busy: 12
-#  Reset: 2
-  spidev: spidev2.0
-  DIO3_TCXO_VOLTAGE: 1.6

bin/config.d/OpenWRT_One_mikroBUS_sx1262.yaml

@@ -1,8 +0,0 @@
-Lora:
-  Module: sx1262
-  IRQ: 10
-  Busy: 12
-#  Reset: 2
-  spidev: spidev2.0
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true

bin/config.d/display-waveshare-2.8.yaml

@@ -1,18 +0,0 @@
-Display:
-
-### Waveshare 2.8inch RPi LCD
-  Panel: ST7789
-  CS: 8
-  DC: 22        # Data/Command pin
-  Backlight: 18
-  Width: 240
-  Height: 320
-  Reset: 27
-  Rotate: true
-  Invert: true
-
-Touchscreen:
-### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
-  Module: XPT2046 # Waveshare 2.8inch
-  CS: 7
-  IRQ: 17

bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml

@@ -1,20 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml

@@ -1,21 +0,0 @@
----
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml

@@ -1,21 +0,0 @@
----
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-
-General:
-  MACAddressSource: eth0

bin/config.d/lora-Adafruit-RFM9x

@@ -1,5 +0,0 @@
-#  Module: RF95  # Adafruit RFM9x
-#  Reset: 25
-#  CS: 7
-#  IRQ: 22
-#  Busy: 23

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,9 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 21
-  IRQ: 16
-  Busy: 20
-  Reset: 18
-  TXen: 13
-  RXen: 12
-  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-meshstick-1262.yaml

@@ -1,11 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  spidev: ch341
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  USB_PID: 0x5512
-  USB_VID: 0x1A86

bin/config.d/lora-pinedio-usb-sx1262.yaml

@@ -1,5 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0 
-  IRQ: 10
-  spidev: ch341

bin/config.d/lora-waveshare-sxxx.yaml

@@ -1,8 +0,0 @@
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: 21
-  IRQ: 16
-  Busy: 20
-  Reset: 18
-  SX126X_ANT_SW: 6

bin/device-install.bat

@@ -1,26 +1,16 @@
 @ECHO OFF
 
 set PYTHON=python
-set WEB_APP=0
-
-:: Determine the correct esptool command to use
-where esptool >nul 2>&1
-if %ERRORLEVEL% EQU 0 (
-    set "ESPTOOL_CMD=esptool"
-) else (
-    set "ESPTOOL_CMD=%PYTHON% -m esptool"
-)
 
 goto GETOPTS
 :HELP
-echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web]
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
 echo Flash image file to device, but first erasing and writing system information
 echo.
 echo     -h               Display this help and exit
 echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
 echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
 echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
-echo     --web            Flash WEB APP.
 goto EOF
 
 :GETOPTS
@@ -29,44 +19,37 @@ if /I "%1"=="--help" goto HELP
 if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
 if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
 if /I "%1"=="-P" set PYTHON=%2 & SHIFT
-if /I "%1"=="--web" set WEB_APP=1 & SHIFT
 SHIFT
 IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-    goto HELP
+	goto HELP
 )
 IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
-    %ESPTOOL_CMD% --baud 115200 erase_flash
-    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
+	%PYTHON% -m esptool --baud 115200 erase_flash
+	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 and C3 board's different OTA partition
     IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
         IF x%FILENAME:esp32c3=%==x%FILENAME% (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
         ) else (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
         )
-    ) else (
-        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
+	) else (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
     )
-    IF %WEB_APP%==1 (
-        for %%f in (littlefswebui-*.bin) do (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
-        )
-    ) else (
-        for %%f in (littlefs-*.bin) do (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
-        )
+    for %%f in (littlefs-*.bin) do (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
     )
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 )
 
 :EOF

bin/device-install.sh

@@ -1,45 +1,22 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
-WEB_APP=false
-
-# Determine the correct esptool command to use
-if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-    ESPTOOL_CMD="$PYTHON -m esptool"
-elif command -v esptool >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool"
-elif command -v esptool.py >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool.py"
-else
-    echo "Error: esptool not found"
-    exit 1
-fi
 
 set -e
 
 # Usage info
 show_help() {
 	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--web]
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, but first erasing and writing system information"
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
-    --web            Flash WEB APP.
 
 EOF
 }
-# Preprocess long options like --web
-for arg in "$@"; do
-    case "$arg" in
-        --web)
-            WEB_APP=true
-            shift # Remove this argument from the list
-            ;;
-    esac
-done
 
 while getopts ":hp:P:f:" opt; do
 	case "${opt}" in
@@ -72,23 +49,19 @@ shift "$((OPTIND - 1))"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	$ESPTOOL_CMD erase_flash
-	$ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
+	"$PYTHON" -m esptool erase_flash
+	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
 	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
 		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
+			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
 		else
-			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
+			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
 		fi
 	else
-		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
-	fi
-	if [ "$WEB_APP" = true ]; then
-		$ESPTOOL_CMD write_flash 0x300000 littlefswebui-*.bin
-	else
-		$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
+		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
 	fi
+	"$PYTHON" -m esptool write_flash 0x300000 littlefs-*.bin
 
 else
 	show_help

bin/device-update.bat

@@ -2,14 +2,6 @@
 
 set PYTHON=python
 
-:: Determine the correct esptool command to use
-where esptool >nul 2>&1
-if %ERRORLEVEL% EQU 0 (
-    set "ESPTOOL_CMD=esptool"
-) else (
-    set "ESPTOOL_CMD=%PYTHON% -m esptool"
-)
-
 goto GETOPTS
 :HELP
 echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
@@ -32,17 +24,17 @@ IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-    goto HELP
+	goto HELP
 )
 IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%
-    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
+    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 )
 
 :EOF

bin/device-update.sh

@@ -2,18 +2,6 @@
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 
-# Determine the correct esptool command to use
-if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-    ESPTOOL_CMD="$PYTHON -m esptool"
-elif command -v esptool >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool"
-elif command -v esptool.py >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool.py"
-else
-    echo "Error: esptool not found"
-    exit 1
-fi
-
 # Usage info
 show_help() {
 cat << EOF
@@ -21,7 +9,7 @@ Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
-    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     
@@ -42,7 +30,7 @@ while getopts ":hp:P:f:" opt; do
         f)  FILENAME=${OPTARG}
             ;;
         *)
- 	        echo "Invalid flag."
+ 	    echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -57,7 +45,7 @@ shift "$((OPTIND-1))"
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
 	printf "Trying to flash update ${FILENAME}"
-	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
+	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
 else
 	show_help
 	echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -6,7 +6,6 @@ import configparser
 import json
 import os
 import sys
-import random
 
 rootdir = "variants/"
 
@@ -40,7 +39,5 @@ for subdir, dirs, files in os.walk(rootdir):
                             "check" in options
                         ):
                             outlist.append(section)
-if ("quick" in options) & (len(outlist) > 3):
-    print(json.dumps(random.sample(outlist, 3)))
-else:
-    print(json.dumps(outlist))
+
+print(json.dumps(outlist))

bin/meshtasticd.service

@@ -1,16 +1,12 @@
 [Unit]
 Description=Meshtastic Native Daemon
 After=network-online.target
-StartLimitInterval=200
-StartLimitBurst=5
 
 [Service]
 User=root
 Group=root
 Type=simple
 ExecStart=/usr/sbin/meshtasticd
-Restart=always
-RestartSec=3
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=multi-user.target

bin/native-install.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
-mkdir -p /etc/meshtasticd
+mkdir /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
 else

bin/platformio-custom.py

@@ -3,8 +3,6 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
-import json
-import re
 
 from readprops import readProps
 
@@ -90,39 +88,12 @@ Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
-
-jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
-with open(jsonLoc) as f:
-    jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
-    userPrefs = json.loads(jsonStr)
-
-pref_flags = []
-# Pre-process the userPrefs
-for pref in userPrefs:
-    if userPrefs[pref].startswith("{"):
-        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
-    elif userPrefs[pref].replace(".", "").isdigit():
-        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
-    elif userPrefs[pref] == "true" or userPrefs[pref] == "false":
-        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
-    elif userPrefs[pref].startswith("meshtastic_"):
-        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
-    # If the value is a string, we need to wrap it in quotes
-    else:
-        pref_flags.append("-D" + pref + "=" + env.StringifyMacro(userPrefs[pref]) + "")
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"])
 
 # General options that are passed to the C and C++ compilers
-flags = [
+projenv.Append(
+    CCFLAGS=[
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
-        "-DAPP_ENV=" + env.get("PIOENV"),
-    ] + pref_flags
-
-print ("Using flags:")
-for flag in flags:
-    print(flag)
-    
-projenv.Append(
-    CCFLAGS=flags,
-)
+    ]
+)

bin/readprops.py

@@ -1,8 +1,6 @@
 import configparser
 import subprocess
-import os
-run_number = os.getenv('GITHUB_RUN_NUMBER', '0')
-build_location = os.getenv('BUILD_LOCATION', 'local')
+
 
 def readProps(prefsLoc):
     """Read the version of our project as a string"""
@@ -13,7 +11,6 @@ def readProps(prefsLoc):
     verObj = dict(
         short="{}.{}.{}".format(version["major"], version["minor"], version["build"]),
         long="unset",
-        deb="unset",
     )
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
@@ -30,16 +27,16 @@ def readProps(prefsLoc):
         # if isDirty:
         #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
         #     suffix = sha + "-d"
-        verObj["long"] = "{}.{}".format(verObj["short"], suffix)
-        verObj["deb"] = "{}.{}~{}{}".format(verObj["short"], run_number, build_location, sha)
+        verObj["long"] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix
+        )
     except:
         # print("Unexpected error:", sys.exc_info()[0])
         # traceback.print_exc()
         verObj["long"] = verObj["short"]
-        verObj["deb"] = "{}.{}~{}".format(verObj["short"], run_number, build_location)
 
     # print("firmware version " + verStr)
     return verObj
 
 
-# print("path is" + ','.join(sys.path))
+# print("path is" + ','.join(sys.path))

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,10 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.9 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.9"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.9/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

bin/rpkg.macros

@@ -1,12 +0,0 @@
-function meshtastic_version {
-    meshtastic_version=$(python3 bin/buildinfo.py short)
-    echo -n "$meshtastic_version"
-}
-function git_commits_num {
-    total_commits=$(git rev-list --all --count)
-    echo -n "$total_commits"
-}
-function git_commit_sha {
-    commit_sha=$(git rev-parse --short HEAD)
-    echo -n "$commit_sha"
-}

boards/bpi_picow_esp32_s3.json

@@ -28,8 +28,6 @@
     "flash_size": "8MB",
     "maximum_ram_size": 327680,
     "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
     "require_upload_port": true,
     "speed": 921600
   },

boards/esp32-s3-zero.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "partitions": "default.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DARDUINO_ESP32S3_DEV",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DBOARD_HAS_PSRAM"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "psram_type": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "platforms": ["espressif32"],
-  "name": "Espressif ESP32-S3-FH4R2 (4 MB QD, 2MB PSRAM)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
-  "vendor": "Espressif"
-}

boards/heltec_mesh_node_t114.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],

boards/icarus.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x2886", "0x0059"]],
-    "mcu": "esp32s3",
-    "variant": "icarus"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "icarus",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 8388608,
-    "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://icarus.azlan.works",
-  "vendor": "Muhammad Shah"
-}

boards/lora-relay-v1.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V1 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora-relay-v2.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V2 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v2",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora_isp4520.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52832_s132_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52832_XXAA -DNRF52",
+    "f_cpu": "64000000L",
+    "mcu": "nrf52832",
+    "variant": "lora_isp4520",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS132",
+      "sd_name": "s132",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B7"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52832_xxAA",
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "lora ISP4520",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 524288,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
+  },
+  "url": "",
+  "vendor": "PsiSoft"
+}

boards/me25ls01-4y10td.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DME25LS01_4Y10TD -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/mesh-tab.json

@@ -1,42 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_16MB.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x303A", "0x80D6"]],
-    "mcu": "esp32s3",
-    "variant": "mesh-tab"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "ESP32-S3 WROOM-1 N16R2 (16 MB FLASH, 2 MB PSRAM)",
-  "upload": {
-    "flash_size": "16MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 16777216,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 460800
-  },
-  "url": "https://github.com/valzzu/Mesh-Tab",
-  "vendor": "Espressif"
-}

boards/ms24sf1.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DMS24SF1 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nordic_pca10059.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DNORDIC_PCA10059 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nrf52840_dk_modified.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "nrf52840dk",
+    "mcu": "nrf52840",
+    "variant": "pca10056-rc-clock",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Nordic Semi"
+}

boards/ppr.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PPR -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4403"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52840",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/ppr1.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52833_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52833_PPR -DNRF52833_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52833",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS113",
+      "sd_name": "s113",
+      "sd_version": "7.2.0",
+      "sd_fwid": "0x00b6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52833_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52833.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/seeed-sensecap-indicator.json

@@ -1,44 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "f_boot": "120000000L",
-    "boot": "qio",
-    "flash_mode": "qio",
-    "hwids": [["0x1A86", "0x7523"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino"],
-  "name": "Seeed Studio SenseCAP Indicator",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 8388608,
-    "require_upload_port": false,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": false,
-    "speed": 921600
-  },
-  "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",
-  "vendor": "Seeed Studio"
-}

boards/seeed-xiao-s3.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x2886", "0x0059"]],
-    "mcu": "esp32s3",
-    "variant": "seeed-xiao-s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "seeed-xiao-s3",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 8388608,
-    "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html",
-  "vendor": "Seeed Studio"
-}

boards/t-deck.json

@@ -10,7 +10,7 @@
       "-DARDUINO_USB_CDC_ON_BOOT=1",
       "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",

boards/t-echo.json

@@ -48,6 +48,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "https://lilygo.cc/products/t-echo-lilygo",
-  "vendor": "LILYGO"
+  "url": "FIXME",
+  "vendor": "TTGO"
 }