Merge branch 'master' into custom-esp32

.devcontainer/99-platformio-udev.rules

@@ -1,183 +0,0 @@
-# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#    http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#####################################################################################
-#
-# INSTALLATION
-#
-# Please visit > https://docs.platformio.org/en/latest/core/installation/udev-rules.html
-#
-#####################################################################################
-
-#
-# Boards
-#
-
-# CP210X USB UART
-ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea[67][013]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="80a9", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# FT231XS USB UART
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Prolific Technology, Inc. PL2303 Serial Port
-ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# QinHeng Electronics HL-340 USB-Serial adapter
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-# QinHeng Electronics CH343 USB-Serial adapter
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d3", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-# QinHeng Electronics CH9102 USB-Serial adapter
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d4", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Arduino boards
-ATTRS{idVendor}=="2341", ATTRS{idProduct}=="[08][023]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="[08][02]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Arduino SAM-BA
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{MTP_NO_PROBE}="1"
-
-# Digistump boards
-ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Maple with DFU
-ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="000[34]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# USBtiny
-ATTRS{idProduct}=="0c9f", ATTRS{idVendor}=="1781", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# USBasp V2.0
-ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Teensy boards
-ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789A]?", ENV{MTP_NO_PROBE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789ABCD]?", MODE:="0666"
-KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", MODE:="0666"
-
-# TI Stellaris Launchpad
-ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI MSP430 Launchpad
-ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f432", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# GD32V DFU Bootloader
-ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="0189", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# FireBeetle-ESP32
-ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7522", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Wio Terminal
-ATTRS{idVendor}=="2886", ATTRS{idProduct}=="[08]02d", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Raspberry Pi Pico
-ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="[01]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# AIR32F103
-ATTRS{idVendor}=="0d28", ATTRS{idProduct}=="0204", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# STM32 virtual COM port
-ATTRS{idVendor}=="0483", ATTRS{idProduct}=="5740", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-#
-# Debuggers
-#
-
-# Black Magic Probe
-SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic GDB Server", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic UART Port", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# opendous and estick
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Original FT232/FT245/FT2232/FT232H/FT4232
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="60[01][104]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# DISTORTEC JTAG-lock-pick Tiny 2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TUMPA, TUMPA Lite
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a9[89]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# XDS100v2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Xverve Signalyzer Tool (DT-USB-ST), Signalyzer LITE (DT-USB-SLITE)
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI/Luminary Stellaris Evaluation Board FTDI (several)
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd[9a]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# egnite Turtelizer 2
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Section5 ICEbear
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c14[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Amontec JTAGkey and JTAGkey-tiny
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI ICDI
-ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# STLink probes
-ATTRS{idVendor}=="0483", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Hilscher NXHX Boards
-ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Hitex probes
-ATTRS{idVendor}=="0640", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Altera USB Blaster
-ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Amontec JTAGkey-HiSpeed
-ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# SEGGER J-Link
-ATTRS{idVendor}=="1366", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Raisonance RLink
-ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Debug Board for Neo1973
-ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Olimex probes
-ATTRS{idVendor}=="15ba", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# USBprog with OpenOCD firmware
-ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
-ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Marvell Sheevaplug
-ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Keil Software, Inc. ULink
-ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2710", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# CMSIS-DAP compatible adapters
-ATTRS{product}=="*CMSIS-DAP*", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Atmel AVR Dragon
-ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2107", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Espressif USB JTAG/serial debug unit
-ATTRS{idVendor}=="303a", ATTRS{idProduct}=="1001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
-
-# Zephyr framework USB CDC-ACM
-ATTRS{idVendor}=="2fe3", ATTRS{idProduct}=="0100", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"

.devcontainer/Dockerfile

@@ -1,38 +0,0 @@
-FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
-
-USER root
-
-# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore(hadolint/DL3008): Use latest version of packages
-RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
-    && apt-get -y install --no-install-recommends \
-    ca-certificates \
-    g++ \
-    git \
-    libbluetooth-dev \
-    libgpiod-dev \
-    liborcania-dev \
-    libssl-dev \
-    libulfius-dev \
-    libyaml-cpp-dev \
-    pipx \
-    pkg-config \
-    python3 \
-    python3-pip \
-    python3-venv \
-    python3-wheel \
-    wget \
-    zip \
-    usbutils \
-    hwdata \
-    gpg \
-    gnupg2 \
-    && apt-get clean && rm -rf /var/lib/apt/lists/*
-
-RUN pipx install platformio==6.1.15
-
-COPY 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules
-
-USER vscode
-
-HEALTHCHECK NONE

.devcontainer/devcontainer.json

@@ -1,36 +0,0 @@
-// For format details, see https://aka.ms/devcontainer.json. For config options, see the
-// README at: https://github.com/devcontainers/templates/tree/main/src/cpp
-{
-  "name": "Meshtastic Firmware Dev",
-  "build": {
-    "dockerfile": "Dockerfile"
-  },
-  "features": {
-    "ghcr.io/devcontainers/features/python:1": {
-      "installTools": true,
-      "version": "latest"
-    }
-  },
-  "customizations": {
-    "vscode": {
-      "extensions": [
-        "ms-vscode.cpptools",
-        "platformio.platformio-ide",
-        "Trunk.io"
-      ],
-      "unwantedRecommendations": ["ms-azuretools.vscode-docker"],
-      "settings": {
-        "extensions.ignoreRecommendations": true
-      }
-    }
-  },
-
-  // Use 'forwardPorts' to make a list of ports inside the container available locally.
-  "forwardPorts": [4403],
-
-  // Use "--device=" to make a local device available inside the container.
-  // "runArgs": ["--device=/dev/ttyACM0"],
-
-  // Run commands to prepare the container for use
-  "postCreateCommand": ".devcontainer/setup.sh"
-}

.devcontainer/setup.sh

@@ -1,3 +0,0 @@
-#!/usr/bin/env sh
-
-git submodule update --init

.env.example

@@ -1,4 +0,0 @@
-# Absolute path to the local meshtastic config.yaml file
-CONFIG_PATH=/path/to/meshtastic/config.yaml
-# USB device to passthrough (`lsusb -t`: look for `ch341`)
-USB_DEVICE=/dev/bus/usb/001/037

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,24 +49,10 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
-        - Heltec Mesh Node T114
-        - Heltec Vision Master E213
-        - Heltec Vision Master E290
-        - Heltec Vision Master T190
-        - Nano G1
-        - Nano G1 Explorer
-        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - Seeed Wio Tracker 1110
-        - Seeed Card Tracker T1000-E
-        - Station G1
-        - Station G2
-        - unPhone
-        - CanaryOne
-        - Chatter
-        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,7 +18,6 @@ body:
         - ESP32
         - RP2040
         - Linux Native
-        - Cross-Platform
         - other
     validations:
       required: true

.github/actions/build-variant/action.yml

@@ -1,95 +0,0 @@
-name: Setup Build Variant Composite Action
-description: Variant build actions for Meshtastic Platform IO steps
-
-inputs:
-  board:
-    description: The board to build for
-    required: true
-  github_token:
-    description: GitHub token
-    required: true
-  build-script-path:
-    description: Path to the build script
-    required: true
-  remove-debug-flags:
-    description: A space separated list of files to remove debug flags from
-    required: false
-    default: ""
-  ota-firmware-source:
-    description: The OTA firmware file to pull
-    required: false
-    default: ""
-  ota-firmware-target:
-    description: The target path to store the OTA firmware file
-    required: false
-    default: ""
-  artifact-paths:
-    description: A newline separated list of paths to store as artifacts
-    required: false
-    default: ""
-  include-web-ui:
-    description: Include the web UI in the build
-    required: false
-    default: "false"
-  arch:
-    description: Processor arch name
-    required: true
-    default: "esp32"
-
-runs:
-  using: composite
-  steps:
-    - name: Build base
-      id: base
-      uses: ./.github/actions/setup-base
-
-    - name: Pull web ui
-      if: inputs.include-web-ui == 'true'
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/web
-        file: build.tar
-        target: build.tar
-        token: ${{ inputs.github_token }}
-        version: tags/v2.5.3
-
-    - name: Unpack web ui
-      if: inputs.include-web-ui == 'true'
-      shell: bash
-      run: |
-        tar -xf build.tar -C data/static
-        rm build.tar
-
-    - name: Remove debug flags for release
-      shell: bash
-      if: inputs.remove-debug-flags != ''
-      run: |
-        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
-          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
-        done
-
-    - name: Build ${{ inputs.board }}
-      shell: bash
-      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
-
-    - name: Pull OTA Firmware
-      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/firmware-ota
-        file: ${{ inputs.ota-firmware-source }}
-        target: ${{ inputs.ota-firmware-target }}
-        token: ${{ inputs.github_token }}
-
-    - name: Get release version string
-      shell: bash
-      run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-      id: version
-
-    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
-      with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-        overwrite: true
-        path: |
-          ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -11,12 +11,7 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Uncomment build epoch
-      shell: bash
-      run: |
-        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
-    - name: Install dependencies
+    - name: Install dependencies 
       shell: bash
       run: |
         sudo apt-get -y update --fix-missing
@@ -27,21 +22,19 @@ runs:
       with:
         python-version: 3.x
 
-    # - name: Cache python libs
-    #   uses: actions/cache@v4
-    #   id: cache-pip # needed in if test
-    #   with:
-    #     path: ~/.cache/pip
-    #     key: ${{ runner.os }}-pip
+    - name: Cache python libs
+      uses: actions/cache@v4
+      id: cache-pip # needed in if test
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip
 
     - name: Upgrade python tools
       shell: bash
       run: |
         python -m pip install --upgrade pip
-        pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
-        pip install -U platformio adafruit-nrfutil --no-build-isolation
-        pip install -U poetry --no-build-isolation
-        pip install -U meshtastic --pre --no-build-isolation
+        pip install -U platformio adafruit-nrfutil
+        pip install -U meshtastic --pre
 
     - name: Upgrade platformio
       shell: bash

.github/dependabot.yml

@@ -1,26 +0,0 @@
-version: 2
-updates:
-  - package-ecosystem: docker
-    directory: devcontainer
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: docker
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: gitsubmodule
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: github-actions
-    directory: /.github/workflows
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific

.github/pull_request_template.md

@@ -1,9 +1,9 @@
-### ❌ (Please delete all these tips and replace them with your text) ❌
-
 ## Thank you for sending in a pull request, here's some tips to get started!
 
+(Please delete all these tips and replace with your text)
+
 - Before starting on some new big chunk of code, it it is optional but highly recommended to open an issue first
-  to say "Hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
+  to say "hey, I think this idea X should be implemented and I'm starting work on it. My general plan is Y, any feedback
   is appreciated." This will allow other devs to potentially save you time by not accidentially duplicating work etc...
 - Please do not check in files that don't have real changes
 - Please do not reformat lines that you didn't have to change the code on
@@ -12,4 +12,3 @@
 - If your PR fixes a bug, mention "fixes #bugnum" somewhere in your pull request description.
 - If your other co-developers have comments on your PR please tweak as needed.
 - Please also enable "Allow edits by maintainers".
-- If your PR gets accepted you can request a "Contributor" role in the Meshtastic Discord

.github/workflows/build_docker.yml

@@ -1,51 +0,0 @@
-name: Build Docker
-
-on: workflow_call
-
-permissions:
-  contents: write
-  packages: write
-
-jobs:
-  build-native:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - name: Docker login
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/login-action@v3
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
-
-      - name: Docker setup
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/setup-buildx-action@v3
-
-      - name: Docker build and push tagged versions
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        uses: docker/build-push-action@v6
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/meshtasticd:${{ steps.version.outputs.version }}
-
-      - name: Docker build and push
-        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/build-push-action@v6
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/meshtasticd:latest

.github/workflows/build_esp32.yml

@@ -7,31 +7,57 @@ on:
         required: true
         type: string
 
-permissions: read-all
-
 jobs:
   build-esp32:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
-        id: build
-        uses: ./.github/actions/build-variant
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware.bin
-          ota-firmware-target: release/bleota.bin
-          artifact-paths: |
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -14,24 +14,50 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-C3
-        id: build
-        uses: ./.github/actions/build-variant
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-c3.bin
+          target: release/bleota-c3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -1,37 +0,0 @@
-name: Build ESP32-C6
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c6:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C6
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          include-web-ui: true
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -7,31 +7,55 @@ on:
         required: true
         type: string
 
-permissions: read-all
-
 jobs:
   build-esp32-s3:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-S3
-        id: build
-        uses: ./.github/actions/build-variant
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-s3.bin
-          ota-firmware-target: release/bleota-s3.bin
-          artifact-paths: |
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32s3

.github/workflows/build_native.yml

@@ -10,11 +10,11 @@ jobs:
   build-native:
     runs-on: ubuntu-latest
     steps:
-      - name: Install libs needed for native build
+      - name: Install libbluetooth
         shell: bash
         run: |
           sudo apt-get update --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
         uses: actions/checkout@v4
@@ -50,3 +50,36 @@ jobs:
           path: |
             release/meshtasticd_linux_x86_64
             bin/config-dist.yaml
+
+      - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        uses: docker/login-action@v3
+        continue-on-error: true # FIXME: Failing docker login auth
+        with:
+          username: meshtastic
+          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
+
+      - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/setup-buildx-action@v3
+
+      - name: Docker build and push tagged versions
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
+
+      - name: Docker build and push
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        continue-on-error: true # FIXME: Failing docker login auth
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/device-simulator:latest

.github/workflows/build_nrf52.yml

@@ -12,17 +12,24 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build NRF52
-        id: build
-        uses: ./.github/actions/build-variant
+        run: bin/build-nrf52.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-nrf52.sh
-          artifact-paths: |
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.hex
             release/*.uf2
             release/*.elf
             release/*.zip
-          arch: nrf52840

.github/workflows/build_raspbian.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
+          apt-get update -y --fix-missing
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
         uses: actions/checkout@v4

.github/workflows/build_raspbian_armv7l.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          sudo apt-get update -y --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
+          apt-get update -y --fix-missing
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code
         uses: actions/checkout@v4

.github/workflows/build_rpi2040.yml

@@ -12,15 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build Raspberry Pi 2040
-        id: build
-        uses: ./.github/actions/build-variant
+        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-rpi2040.sh
-          artifact-paths: |
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.uf2
             release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -1,27 +0,0 @@
-name: Build STM32
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-jobs:
-  build-stm32:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build STM32WL
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-stm32.sh
-          artifact-paths: |
-            release/*.hex
-            release/*.bin
-            release/*.elf
-          arch: stm32

.github/workflows/generate-userprefs.yml

@@ -1,35 +0,0 @@
-name: Generate UsersPrefs JSON manifest
-
-on:
-  push:
-    paths:
-      - userPrefs.h
-    branches:
-      - master
-
-jobs:
-  generate-userprefs:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-
-      - name: Install Clang
-        run: sudo apt-get install -y clang
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Generate userPrefs.jsom
-        run: python3 ./bin/build-userprefs-json.py
-
-      - name: Trunk format json
-        run: trunk format userPrefs.json
-
-      - name: Commit userPrefs.json
-        run: |
-          git config --global user.email "actions@github.com"
-          git config --global user.name "GitHub Actions"
-          git add userPrefs.json
-          git commit -m "Update userPrefs.json"
-          git push

.github/workflows/main_matrix.yml

@@ -1,7 +1,7 @@
 name: CI
-concurrency:
-  group: ci-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -24,7 +24,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, check]
     runs-on: ubuntu-latest
     steps:
       - id: checkout
@@ -32,21 +32,15 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "${{ github.head_ref }}" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
-          fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          echo "$TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
       esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
       esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
-      stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   check:
@@ -56,7 +50,6 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
       - uses: actions/checkout@v4
       - name: Build base
@@ -92,15 +85,6 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
-  build-esp32-c6:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_esp32_c6.yml
-    with:
-      board: ${{ matrix.board }}
-
   build-nrf52:
     needs: setup
     strategy:
@@ -119,15 +103,6 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
-  build-stm32:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
-    uses: ./.github/workflows/build_stm32.yml
-    with:
-      board: ${{ matrix.board }}
-
   package-raspbian:
     uses: ./.github/workflows/package_raspbian.yml
 
@@ -137,14 +112,8 @@ jobs:
   package-native:
     uses: ./.github/workflows/package_amd64.yml
 
-  build-docker:
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    uses: ./.github/workflows/build_docker.yml
-    secrets: inherit
-
   after-checks:
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [check]
     steps:
       - name: Checkout code
@@ -157,20 +126,17 @@ jobs:
     permissions:
       contents: write
       pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
         build-esp32,
         build-esp32-s3,
         build-esp32-c3,
-        build-esp32-c6,
         build-nrf52,
         build-rpi2040,
-        build-stm32,
+        package-raspbian,
+        package-raspbian-armv7l,
+        package-native,
       ]
     steps:
       - name: Checkout code
@@ -182,7 +148,6 @@ jobs:
       - uses: actions/download-artifact@v4
         with:
           path: ./
-          pattern: firmware-${{matrix.arch}}-*
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -193,12 +158,12 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{ steps.version.outputs.version }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -207,15 +172,16 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
+            ./meshtasticd_linux_*
+            ./config-dist.yaml
             ./littlefs-*.bin
-            ./littlefswebui-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
+          retention-days: 90
 
       - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{ steps.version.outputs.version }}
           merge-multiple: true
           path: ./output
 
@@ -229,35 +195,32 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
+      - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
+        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+        uses: gavv/pull-request-artifacts@v2.1.0
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
-          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
+          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          artifacts-repo: meshtastic/artifacts
+          artifacts-branch: device
+          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
 
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      [
-        gather-artifacts,
-        package-raspbian,
-        package-raspbian-armv7l,
-        package-native,
-      ]
+    needs: [gather-artifacts, after-checks]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -271,6 +234,42 @@ jobs:
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
+      - uses: actions/download-artifact@v4
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
+          path: ./output
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
+
+      - uses: actions/download-artifact@v4
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip Elfs
+        run: zip -j -9 -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
       - name: Create release
         uses: actions/create-release@v1
         id: create_release
@@ -284,16 +283,25 @@ jobs:
         env:
           GITHUB_TOKEN: ${{ github.token }}
 
-      - name: Download deb files
-        uses: actions/download-artifact@v4
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
         with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
-          merge-multiple: true
-          path: ./output
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
 
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
 
       - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
@@ -330,79 +338,7 @@ jobs:
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v6
         with:
-          title: Bump version.properties
           add-paths: |
             version.properties
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
-
-      - uses: actions/download-artifact@v4
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
-
-      - name: Add debug elfs to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-native
     steps:
       - name: Checkout code
@@ -47,30 +47,18 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/meshtasticd/web
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
-          shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
-          gunzip .debpkg/usr/share/meshtasticd/web/ -r
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
-          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
-          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
-          chmod +x .debpkg/DEBIAN/preinst
-          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
-          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:
@@ -79,7 +67,7 @@ jobs:
           maintainer: Jonathan Bennett
           version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: amd64
-          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian
     steps:
       - name: Checkout code
@@ -47,30 +47,18 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/meshtasticd/web
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
-          shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
-          gunzip .debpkg/usr/share/meshtasticd/web/ -r
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
-          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
-          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
-          chmod +x .debpkg/DEBIAN/preinst
-          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
-          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:
@@ -79,7 +67,7 @@ jobs:
           maintainer: Jonathan Bennett
           version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: arm64
-          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code
@@ -47,30 +47,18 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/meshtasticd/web
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
-          shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
-          gunzip .debpkg/usr/share/meshtasticd/web/ -r
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
-          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
-          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
-          chmod +x .debpkg/DEBIAN/preinst
-          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
-          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:
@@ -79,7 +67,7 @@ jobs:
           maintainer: Jonathan Bennett
           version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: armhf
-          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4

.github/workflows/sec_sast_semgrep_cron.yml

@@ -12,7 +12,7 @@ jobs:
   semgrep-full:
     runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,9 +4,9 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/stale_bot.yml

@@ -1,22 +0,0 @@
-name: process stale Issues and PR's
-on:
-  schedule:
-    - cron: 0 6 * * *
-  workflow_dispatch: {}
-
-permissions:
-  issues: write
-  pull-requests: write
-  actions: write
-
-jobs:
-  stale_issues:
-    name: Close Stale Issues
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Stale PR+Issues
-        uses: actions/stale@v9.0.0
-        with:
-          exempt-issue-labels: pinned,3.0
-          exempt-pr-labels: pinned,3.0

.github/workflows/tests.yml

@@ -1,130 +0,0 @@
-name: End to end tests
-
-on:
-  schedule:
-    - cron: "0 0 * * *" # Run every day at midnight
-  workflow_dispatch: {}
-
-jobs:
-  test-simulator:
-    runs-on: ubuntu-latest
-    env:
-      LCOV_CAPTURE_FLAGS: --quiet --capture --include "${PWD}/src/*" --exclude '*/src/mesh/generated/*' --directory .pio/build/coverage/src --base-directory "${PWD}"
-    steps:
-      - name: Install libs needed for native build
-        shell: bash
-        run: |
-          sudo apt-get update --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
-          sudo apt-get install -y lcov
-
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - name: Upgrade python tools
-        shell: bash
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio adafruit-nrfutil dotmap
-          pip install -U meshtastic --pre
-
-      - name: Upgrade platformio
-        shell: bash
-        run: |
-          pio upgrade
-
-      - name: Build Native
-        run: bin/build-native.sh
-
-      # We now run integration test before other build steps (to quickly see runtime failures)
-      - name: Build for native/coverage
-        run: |
-          platformio run -e coverage
-          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --initial --output-file coverage_base.info
-
-      - name: Integration test
-        run: |
-          .pio/build/coverage/program &
-          PID=$!
-          timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
-          echo "Simulator started, launching python test..."
-          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
-          wait
-          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name integration --output-file coverage_integration.info
-
-      - name: PlatformIO Tests
-        run: |
-          platformio test -e coverage --junit-output-path testreport.xml
-          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name tests --output-file coverage_tests.info
-
-      - name: Test Report
-        uses: dorny/test-reporter@v1.9.1
-        if: success() || failure() # run this step even if previous step failed
-        with:
-          name: PlatformIO Tests
-          path: testreport.xml
-          reporter: java-junit
-
-      - name: Generate Code Coverage Report
-        run: |
-          lcov --quiet --add-tracefile coverage_base.info --add-tracefile coverage_integration.info --add-tracefile coverage_tests.info --output-file coverage_src.info
-          mkdir code-coverage-report
-          genhtml --quiet --legend --prefix "${PWD}" coverage_src.info --output-directory code-coverage-report
-          mv coverage_*.info code-coverage-report
-
-      - name: Save Code Coverage Report
-        uses: actions/upload-artifact@v4
-        with:
-          name: code-coverage-report
-          path: code-coverage-report
-
-  hardware-tests:
-    runs-on: test-runner
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-
-      # - uses: actions/setup-python@v5
-      #   with:
-      #     python-version: '3.10'
-
-      # pipx install "setuptools<72"
-      - name: Upgrade python tools
-        shell: bash
-        run: |
-          pipx install adafruit-nrfutil
-          pipx install poetry
-          pipx install meshtastic --pip-args=--pre
-
-      - name: Install PlatformIO from script
-        shell: bash
-        run: |
-          curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
-          python3 get-platformio.py
-
-      - name: Upgrade platformio
-        shell: bash
-        run: |
-          export PATH=$PATH:$HOME/.local/bin
-          pio upgrade
-
-      - name: Setup Node
-        uses: actions/setup-node@v4
-        with:
-          node-version: 18
-
-      - name: Setup pnpm
-        uses: pnpm/action-setup@v4
-        with:
-          version: latest
-
-      - name: Install dependencies, setup devices and run
-        shell: bash
-        run: |
-          git submodule update --init --recursive
-          cd meshtestic/
-          pnpm install
-          pnpm run setup
-          pnpm run test

.github/workflows/trunk_format_pr.yml

@@ -1,43 +0,0 @@
-name: Run Trunk Fmt on PR Comment
-
-on:
-  issue_comment:
-    types: [created]
-
-jobs:
-  trunk-fmt:
-    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Run Trunk Fmt
-        run: trunk fmt
-
-      - name: Commit and push changes
-        run: |
-          git config --global user.name "github-actions[bot]"
-          git config --global user.email "github-actions[bot]@users.noreply.github.com"
-          git add .
-          git commit -m "Add firmware version ${{ steps.version.outputs.version }}"
-          git push
-
-      - name: Comment on PR
-        uses: actions/github-script@v7
-        with:
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-          script: |
-            github.issues.createComment({
-              issue_number: context.issue.number,
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              body: '`trunk fmt` has been run on this PR.'
-            })

.github/workflows/update_protobufs.yml

@@ -1,4 +1,4 @@
-name: Update protobufs and regenerate classes
+name: "Update protobufs and regenerate classes"
 on: workflow_dispatch
 
 jobs:
@@ -17,18 +17,17 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9.1-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.9.1-linux-x86.tar.gz
-          mv nanopb-0.4.9.1-linux-x86 nanopb-0.4.9
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
 
       - name: Re-generate protocol buffers
         run: |
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v6
         with:
-          title: Update protobufs and classes
           add-paths: |
             protobufs
             src/mesh

.gitignore

@@ -1,4 +1,6 @@
 .pio
+main/configuration.h
+main/credentials.h
 
 # ignore vscode IDE settings files
 .vscode/*
@@ -30,4 +32,4 @@ release/
 .vscode/extensions.json
 /compile_commands.json
 src/mesh/raspihttp/certificate.pem
-src/mesh/raspihttp/private_key.pem
+src/mesh/raspihttp/private_key.pem

.gitmodules

@@ -1,6 +1,3 @@
 [submodule "protobufs"]
 	path = protobufs
 	url = https://github.com/meshtastic/protobufs.git
-[submodule "meshtestic"]
-	path = meshtestic
-	url = https://github.com/meshtastic/meshTestic

.gitpod.yml

@@ -1,2 +0,0 @@
-tasks:
-  - init: pip install platformio && pip install --upgrade pip

.trunk/trunk.yaml

@@ -1,37 +1,36 @@
 version: 0.1
 cli:
-  version: 1.22.8
+  version: 1.22.2
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.6
+      ref: v1.5.0
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - prettier@3.4.2
-    - trufflehog@3.86.1
+    - trufflehog@3.76.3
     - yamllint@1.35.1
-    - bandit@1.8.0
-    - checkov@3.2.334
-    - terrascan@1.19.9
-    - trivy@0.58.0
+    - bandit@1.7.8
+    - checkov@3.2.95
+    - terrascan@1.19.1
+    - trivy@0.51.1
     #- trufflehog@3.63.2-rc0
-    - taplo@0.9.3
-    - ruff@0.8.3
+    - taplo@0.8.1
+    - ruff@0.4.4
     - isort@5.13.2
-    - markdownlint@0.43.0
-    - oxipng@9.1.3
+    - markdownlint@0.40.0
+    - oxipng@9.1.1
     - svgo@3.3.2
-    - actionlint@1.7.4
-    - flake8@7.1.1
-    - hadolint@2.12.1-beta
+    - actionlint@1.7.0
+    - flake8@7.0.0
+    - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.10.0
+    - black@24.4.2
     - git-diff-check
-    - gitleaks@8.21.2
+    - gitleaks@8.18.2
     - clang-format@16.0.3
-    #- prettier@3.3.3
+    - prettier@3.2.5
   ignore:
     - linters: [ALL]
       paths:
@@ -40,7 +39,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@18.20.5
+    - node@18.12.1
 actions:
   disabled:
     - trunk-announce

.vscode/extensions.json

@@ -2,9 +2,8 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-        "platformio.platformio-ide"
+		"ms-vscode.cpptools",
+        "platformio.platformio-ide",
+        "trunk.io"
     ],
-    "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
-    ]
 }

CODE_OF_CONDUCT.md

@@ -1,4 +0,0 @@
-# Contributor Covenant Code of Conduct
-
-The Meshtastic Firmware project is subject to the code of conduct for the parent project, which can be found here:
-https://meshtastic.org/docs/legal/conduct/

CONTRIBUTING.md

@@ -1,47 +0,0 @@
-# Contributing to Meshtastic Firmware
-
-We're excited that you're interested in contributing to the Meshtastic firmware! This document provides a high-level overview of how you can get involved.
-
-## Important First Steps
-
-Before you begin, please:
-
-1. **Read our documentation**: Our [official documentation](https://meshtastic.org/docs/) is a crucial resource. It contains essential information about the project.
-
-2. **Check out the firmware build guide**: For specific instructions on setting up your development environment and building the firmware, refer to our [Firmware Build Guide](https://meshtastic.org/docs/development/firmware/build/).
-
-3. Read our [Code of Conduct](https://meshtastic.org/docs/legal/conduct/)
-
-4. Join our [Discord community](https://discord.com/invite/ktMAKGBnBs) to connect with developers and other contributors to get help.
-
-## Getting Help and Discussing Ideas
-
-We encourage open communication and discussion before diving into code changes:
-
-1. **Use GitHub Discussions**: For new ideas, questions, or to discuss potential changes, start a conversation in our [GitHub Discussions](https://github.com/meshtastic/firmware/discussions) first. This helps us collaborate and avoid duplicate work.
-
-2. **Join our Discord**: For real-time chat and quick questions, join our [Discord server](https://discord.com/invite/ktMAKGBnBs). It's a great place to get help and connect with other developers and the community.
-
-3. **Reporting Issues**: If you've identified a bug, please use our bug report template when creating a new issue in the [issue tracker](https://github.com/meshtastic/firmware/issues). Ensure you've searched existing issues to avoid duplicates.
-
-## Making Contributions
-
-> [!IMPORTANT]
-> Before making any contributions, you must sign our Contributor License Agreement (CLA). You can do this by visiting https://cla-assistant.io/meshtastic/firmware. Be sure to use the GitHub account you will use to submit your contributions when signing.
-
-1. Fork the repository
-2. Create a new branch for your feature or bug fix
-3. Make your changes
-4. Test your changes thoroughly
-5. Create a pull request with a clear description, using the provided template, of your changes. Be sure to enable "Allow edits from maintainers".
-
-## Coding Standards
-
-To ensure consistent code formatting across the project:
-
-1. Install the [Trunk](https://marketplace.visualstudio.com/items?itemName=Trunk.io) extension for Visual Studio Code.
-2. Before submitting your changes, run `trunk fmt` to automatically format your code according to our standards.
-
-Adhering to these formatting guidelines helps maintain code consistency and makes the review process smoother.
-
-Thank you for contributing to Meshtastic!

Dockerfile

@@ -1,29 +1,32 @@
-# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore-all(hadolint/DL3008): Use latest version of apt packages for buildchain
-# trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
+FROM debian:bookworm-slim AS builder
 
-FROM python:3.12-bookworm AS builder
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
-# Install Dependencies
-ENV PIP_ROOT_USER_ACTION=ignore
-RUN apt-get update && apt-get install --no-install-recommends -y wget g++ zip git ca-certificates \
-        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
-        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config && \
-    apt-get clean && rm -rf /var/lib/apt/lists/* && \
-    pip install --no-cache-dir -U platformio==6.1.16 && \
-    mkdir /tmp/firmware
+# http://bugs.python.org/issue19846
+# > At the moment, setting "LANG=C" on a Linux system *fundamentally breaks Python 3*, and that's not OK.
+ENV LANG C.UTF-8
+
+# Install build deps
+USER root
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
+                           ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
+                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
+
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
+USER mesh
 
-# Copy source code
 WORKDIR /tmp/firmware
-COPY . /tmp/firmware
-
-# Build
-RUN bash ./bin/build-native.sh && \
-    cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+RUN python3 -m venv /tmp/firmware 
+RUN bash -o pipefail -c "source bin/activate; pip3 install --no-cache-dir -U platformio==6.1.15"
+# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
+COPY --chown=mesh:mesh . /tmp/firmware
+RUN bash -o pipefail -c "source ./bin/activate && bash ./bin/build-native.sh"
+RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 
 ##### PRODUCTION BUILD #############
@@ -32,25 +35,20 @@ FROM debian:bookworm-slim
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
-# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
-USER root
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/*
 
-RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 && \
-    apt-get clean && rm -rf /var/lib/apt/lists/* \
-    && mkdir -p /var/lib/meshtasticd \
-    && mkdir -p /etc/meshtasticd/config.d
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
+USER mesh
 
-# Fetch compiled binary from the builder
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
-# Copy config templates
-COPY ./bin/config.d /etc/meshtasticd/available.d
+WORKDIR /home/mesh
+COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/
 
-WORKDIR /var/lib/meshtasticd
-VOLUME /var/lib/meshtasticd
+RUN mkdir data
+VOLUME /home/mesh/data
 
-# Expose Meshtastic TCP API port from the host
-EXPOSE 4403
+CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]
 
-CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
-
-HEALTHCHECK NONE
+HEALTHCHECK NONE

SECURITY.md

@@ -1,12 +0,0 @@
-# Security Policy
-
-## Supported Versions
-
-| Firmware Version | Supported          |
-| ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
-
-## Reporting a Vulnerability
-
-We support the private reporting of potential security vulnerabilities. Please go to the Security tab to file a report with a description of the potential vulnerability and reproduction scripts (preferred) or steps, and our developers will review.

alpine.Dockerfile

@@ -1,42 +0,0 @@
-# trunk-ignore-all(trivy/DS002): We must run as root for this container
-# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
-# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
-
-FROM python:3.12-alpine3.21 AS builder
-
-ENV PIP_ROOT_USER_ACTION=ignore
-RUN apk add bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
-        libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone && \
-    pip install --no-cache-dir -U platformio==6.1.16 && \
-    mkdir /tmp/firmware
-
-WORKDIR /tmp/firmware
-COPY . /tmp/firmware
-
-# Create small package (no debugging symbols)
-# Add `argp` for musl
-ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
-
-RUN bash ./bin/build-native.sh && \
-    cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
-
-# ##### PRODUCTION BUILD #############
-
-FROM alpine:3.21
-
-# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
-USER root
-
-RUN apk add libstdc++ libgpiod yaml-cpp libusb i2c-tools \
-    && mkdir -p /var/lib/meshtasticd \
-    && mkdir -p /etc/meshtasticd/config.d
-COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
-
-WORKDIR /var/lib/meshtasticd
-VOLUME /var/lib/meshtasticd
-
-EXPOSE 4403
-
-CMD [ "sh",  "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
-
-HEALTHCHECK NONE

arch/esp32/esp32.ini

@@ -2,10 +2,10 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.9.0
+platform = platformio/espressif32@6.7.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -31,7 +31,7 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
   -DLIBPAX_ARDUINO
@@ -43,13 +43,11 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.2
-  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
-  lewisxhe/XPowersLib@^0.2.6
+  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
 
 lib_ignore = 
   segger_rtt

arch/esp32/esp32c6.ini

@@ -1,41 +0,0 @@
-[esp32c6_base]
-extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
-build_flags =
-  ${arduino_base.build_flags}
-  -Wall
-  -Wextra
-  -Isrc/platform/esp32
-  -std=c++11
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DSERIAL_BUFFER_SIZE=4096
-  -DLIBPAX_ARDUINO
-  -DLIBPAX_WIFI
-  -DLIBPAX_BLE
-  -DMESHTASTIC_EXCLUDE_WEBSERVER
-  ;-DDEBUG_HEAP
-  ; TEMP
-  -DHAS_BLUETOOTH=0
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  lewisxhe/XPowersLib@^0.2.6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
-
-build_src_filter = 
- ${esp32_base.build_src_filter} -<mesh/http> 
-
-monitor_speed = 460800
-monitor_filters = esp32_c3_exception_decoder
-
-lib_ignore =
-  NonBlockingRTTTL
-  NimBLE-Arduino
-  libpax
-  

arch/nrf52/cpp_overrides/lfs_util.h

@@ -1,208 +0,0 @@
-/*
- * lfs utility functions
- *
- * Copyright (c) 2017, Arm Limited. All rights reserved.
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-// MESHTASTIC/@geeksville note: This file is copied from the Adafruit nrf52 arduino lib.  And we use a special -include in
-// nrf52.ini to load it before EVERY file we do this hack because the default definitions for LFS_ASSERT are quite poor and we
-// don't want to fork the adafruit lib (again) and send in a PR that they probably won't merge anyways. This file might break if
-// they ever update lfs.util on their side, in which case we'll need to update this file to match their new version. The version
-// this is a copy from is almost exactly
-// https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/c25d93268a3b9c23e9a1ccfcaf9b208beca624ca/libraries/Adafruit_LittleFS/src/littlefs/lfs_util.h
-
-#ifndef LFS_UTIL_H
-#define LFS_UTIL_H
-
-// Users can override lfs_util.h with their own configuration by defining
-// LFS_CONFIG as a header file to include (-DLFS_CONFIG=lfs_config.h).
-//
-// If LFS_CONFIG is used, none of the default utils will be emitted and must be
-// provided by the config file. To start I would suggest copying lfs_util.h and
-// modifying as needed.
-#ifdef LFS_CONFIG
-#define LFS_STRINGIZE(x) LFS_STRINGIZE2(x)
-#define LFS_STRINGIZE2(x) #x
-#include LFS_STRINGIZE(LFS_CONFIG)
-#else
-
-// System includes
-#include <stdbool.h>
-#include <stdint.h>
-#include <string.h>
-
-#ifndef LFS_NO_MALLOC
-#include <stdlib.h>
-#endif
-#ifndef LFS_NO_ASSERT
-#include <assert.h>
-#endif
-
-#if !defined(LFS_NO_DEBUG) || !defined(LFS_NO_WARN) || !defined(LFS_NO_ERROR)
-#include <stdio.h>
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// Macros, may be replaced by system specific wrappers. Arguments to these
-// macros must not have side-effects as the macros can be removed for a smaller
-// code footprint
-
-// Logging functions
-#ifndef LFS_NO_DEBUG
-
-void logLegacy(const char *level, const char *fmt, ...);
-#define LFS_DEBUG(fmt, ...) logLegacy("DEBUG", "lfs debug:%d: " fmt "\n", __LINE__, __VA_ARGS__)
-#else
-#define LFS_DEBUG(fmt, ...)
-#endif
-
-#ifndef LFS_NO_WARN
-#define LFS_WARN(fmt, ...) logLegacy("WARN", "lfs warn:%d: " fmt "\n", __LINE__, __VA_ARGS__)
-#else
-#define LFS_WARN(fmt, ...)
-#endif
-
-#ifndef LFS_NO_ERROR
-#define LFS_ERROR(fmt, ...) logLegacy("ERROR", "lfs error:%d: " fmt "\n", __LINE__, __VA_ARGS__)
-#else
-#define LFS_ERROR(fmt, ...)
-#endif
-
-// Runtime assertions
-#ifndef LFS_NO_ASSERT
-#define LFS_ASSERT(test) assert(test)
-#else
-extern void lfs_assert(const char *reason);
-#define LFS_ASSERT(test)                                                                                                         \
-    if (!(test))                                                                                                                 \
-    lfs_assert(#test)
-#endif
-
-// Builtin functions, these may be replaced by more efficient
-// toolchain-specific implementations. LFS_NO_INTRINSICS falls back to a more
-// expensive basic C implementation for debugging purposes
-
-// Min/max functions for unsigned 32-bit numbers
-static inline uint32_t lfs_max(uint32_t a, uint32_t b)
-{
-    return (a > b) ? a : b;
-}
-
-static inline uint32_t lfs_min(uint32_t a, uint32_t b)
-{
-    return (a < b) ? a : b;
-}
-
-// Find the next smallest power of 2 less than or equal to a
-static inline uint32_t lfs_npw2(uint32_t a)
-{
-#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
-    return 32 - __builtin_clz(a - 1);
-#else
-    uint32_t r = 0;
-    uint32_t s;
-    a -= 1;
-    s = (a > 0xffff) << 4;
-    a >>= s;
-    r |= s;
-    s = (a > 0xff) << 3;
-    a >>= s;
-    r |= s;
-    s = (a > 0xf) << 2;
-    a >>= s;
-    r |= s;
-    s = (a > 0x3) << 1;
-    a >>= s;
-    r |= s;
-    return (r | (a >> 1)) + 1;
-#endif
-}
-
-// Count the number of trailing binary zeros in a
-// lfs_ctz(0) may be undefined
-static inline uint32_t lfs_ctz(uint32_t a)
-{
-#if !defined(LFS_NO_INTRINSICS) && defined(__GNUC__)
-    return __builtin_ctz(a);
-#else
-    return lfs_npw2((a & -a) + 1) - 1;
-#endif
-}
-
-// Count the number of binary ones in a
-static inline uint32_t lfs_popc(uint32_t a)
-{
-#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
-    return __builtin_popcount(a);
-#else
-    a = a - ((a >> 1) & 0x55555555);
-    a = (a & 0x33333333) + ((a >> 2) & 0x33333333);
-    return (((a + (a >> 4)) & 0xf0f0f0f) * 0x1010101) >> 24;
-#endif
-}
-
-// Find the sequence comparison of a and b, this is the distance
-// between a and b ignoring overflow
-static inline int lfs_scmp(uint32_t a, uint32_t b)
-{
-    return (int)(unsigned)(a - b);
-}
-
-// Convert from 32-bit little-endian to native order
-static inline uint32_t lfs_fromle32(uint32_t a)
-{
-#if !defined(LFS_NO_INTRINSICS) && ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_LITTLE_ENDIAN) ||                                \
-                                    (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_LITTLE_ENDIAN) ||                          \
-                                    (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__))
-    return a;
-#elif !defined(LFS_NO_INTRINSICS) &&                                                                                             \
-    ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_BIG_ENDIAN) || (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_BIG_ENDIAN) || \
-     (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__))
-    return __builtin_bswap32(a);
-#else
-    return (((uint8_t *)&a)[0] << 0) | (((uint8_t *)&a)[1] << 8) | (((uint8_t *)&a)[2] << 16) | (((uint8_t *)&a)[3] << 24);
-#endif
-}
-
-// Convert to 32-bit little-endian from native order
-static inline uint32_t lfs_tole32(uint32_t a)
-{
-    return lfs_fromle32(a);
-}
-
-// Calculate CRC-32 with polynomial = 0x04c11db7
-void lfs_crc(uint32_t *crc, const void *buffer, size_t size);
-
-// Allocate memory, only used if buffers are not provided to littlefs
-static inline void *lfs_malloc(size_t size)
-{
-#ifndef LFS_NO_MALLOC
-    extern void *pvPortMalloc(size_t xWantedSize);
-    return pvPortMalloc(size);
-#else
-    (void)size;
-    return NULL;
-#endif
-}
-
-// Deallocate memory, only used if buffers are not provided to littlefs
-static inline void lfs_free(void *p)
-{
-#ifndef LFS_NO_MALLOC
-    extern void vPortFree(void *pv);
-    vPortFree(p);
-#else
-    (void)p;
-#endif
-}
-
-#ifdef __cplusplus
-} /* extern "C" */
-#endif
-
-#endif
-#endif

arch/nrf52/nrf52.ini

@@ -1,32 +1,21 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.7.0
+platform = platformio/nordicnrf52@^10.5.0
 extends = arduino_base
-platform_packages =
-  ; our custom Git version until they merge our PR
-  framework-arduinoadafruitnrf52 @ https://github.com/geeksville/Adafruit_nRF52_Arduino.git
-  toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
-build_flags =
-  -include arch/nrf52/cpp_overrides/lfs_util.h
+build_flags = 
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
   -Isrc/platform/nrf52
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
-  -DMESHTASTIC_EXCLUDE_AUDIO=1
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
-  -DMAX_NUM_NODES=80
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  rweather/Crypto@^0.4.0
 
 lib_ignore =
-  BluetoothOTA
-  lvgl
+  BluetoothOTA

arch/nrf52/nrf52840.ini

@@ -7,72 +7,3 @@ lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
-
-; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
-
-; We want the initial breakpoint at setup() instead of main().  Also we want to enable semihosting at that point so instead of
-debug_init_break = tbreak setup
-; we just turn off the platformio tbreak and do it in .gdbinit (where we have more flexibility for scripting)
-; also we use a permanent breakpoint so it gets reused each time we restart the debugging session?
-; debug_init_break = tbreak main
-
-; Note: add "monitor arm semihosting_redirect tcp 4444 all" if you want the stdout from the device to go to that port number instead
-; (for use by meshtastic command line)
-;  monitor arm semihosting disable
-;  monitor debug_level 3
-;
-; IMPORTANT: fileio must be disabled before using port 5555 - openocd ver 0.12 has a bug where if enabled it never properly parses the special :tt name
-; for stdio access.
-;   monitor arm semihosting_redirect tcp 5555 stdio
-
-; Also note: it is _impossible_ to do non blocking reads on the semihost console port (an oversight when ARM specified the semihost API).
-; So we'll neve be able to general purpose bi-directional communication with the device over semihosting.
-debug_extra_cmds =
-  echo Running .gdbinit script
-  ;monitor arm semihosting enable
-  ;monitor arm semihosting_fileio enable
-  ;monitor arm semihosting_redirect disable
-  commands 1
-  ; echo Breakpoint at setup() has semihosting console, connect to it with "telnet localhost 5555"
-  ; set wantSemihost = 1
-  set useSoftDevice = 0
-  end
-
-  ; Only reprogram the board if the code has changed
-debug_load_mode = modified
-;debug_load_mode = manual
-; We default to the stlink adapter because it is very cheap and works well, though others (such as jlink) are also supported.
-;debug_tool = jlink
-debug_tool = stlink
-debug_speed = 4000
-;debug_tool = custom
-; debug_server =
-;  openocd
-;  -f
-;  /usr/local/share/openocd/scripts/interface/stlink.cfg
-;  -f
-;  /usr/local/share/openocd/scripts/target/nrf52.cfg
-; $PLATFORMIO_CORE_DIR/packages/tool-openocd/openocd/scripts/interface/cmsis-dap.cfg
-
-; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
-; programming time is about the same as the bootloader version.
-; For information on this see the meshtastic developers documentation for "Development on the NRF52"
-; We manually pass in the elf file so that pyocd can reverse engineer FreeRTOS data (running threads, etc...)
-;debug_server =
-;  pyocd
-;  gdbserver
-;  -j
-;  ${platformio.workspace_dir}/..
-;  -t
-;  nrf52840
-;  --semihosting
-;  --elf
-;  ${platformio.build_dir}/${this.__env__}/firmware.elf
-
-; If you want to debug the semihosting support you can turn on extra logging in pyocd with
-;   -L
-;   pyocd.debug.semihost.trace=debug
-
-; The following is not needed because it automatically tries do this
-;debug_server_ready_pattern = -.*GDB server started on port \d+.*
-;debug_port = localhost:3333

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
-; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
+; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
+platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
 framework = arduino
 
 build_src_filter = 
@@ -9,7 +9,7 @@ build_src_filter =
   -<nimble/> 
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
-  -<platform/rp2xx0>
+  -<platform/rp2040>
   -<mesh/wifi/>
   -<mesh/http/>
   +<mesh/raspihttp/>
@@ -23,10 +23,8 @@ build_src_filter =
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
-  ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
-  https://github.com/lovyan03/LovyanGFX.git#1401c28a47646fe00538d487adcb2eb3c72de805
-  https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
+  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
 
 build_flags =
   ${arduino_base.build_flags}
@@ -34,10 +32,6 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
-  -lpthread
-  -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
-  -li2c
-  -std=c++17

arch/rp2040/rp2040.ini

@@ -1,14 +1,14 @@
 ; Common settings for rp2040 Processor based targets
-[rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
+[rp2040_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/platform/rp2xx0
+  -Isrc/platform/rp2040
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
@@ -16,10 +16,8 @@ build_src_filter =
 
 lib_ignore =
   BluetoothOTA
-  lvgl
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
   rweather/Crypto

arch/rp2xx0/rp2040.ini

@@ -1,26 +0,0 @@
-; Common settings for rp2040 Processor based targets
-[rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
-extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
-
-board_build.core = earlephilhower
-board_build.filesystem_size = 0.5m
-build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
-  -Isrc/platform/rp2xx0
-  -Isrc/platform/rp2xx0/hardware_rosc/include
-  -Isrc/platform/rp2xx0/pico_sleep/include
-  -D__PLAT_RP2040__
-#  -D _POSIX_THREADS
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
-
-lib_ignore =
-  BluetoothOTA
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${environmental_base.lib_deps}
-  ${radiolib_base.lib_deps}
-  rweather/Crypto

arch/stm32/stm32.ini

@@ -1,38 +0,0 @@
-[stm32_base]
-extends = arduino_base
-platform = ststm32
-platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#ea74156acd823b6d14739f389e6cdc648f8ee36e
-
-build_type = release
-
-;board_build.flash_offset = 0x08000000
-
-build_flags = 
-  ${arduino_base.build_flags}
-  -flto
-  -Isrc/platform/stm32wl -g
-  -DMESHTASTIC_MINIMIZE_BUILD
-  -DMESHTASTIC_EXCLUDE_GPS
-  -DDEBUG_MUTE
-;  -DVECT_TAB_OFFSET=0x08000000
-  -DconfigUSE_CMSIS_RTOS_V2=1
-;  -DSPI_MODE_0=SPI_MODE0
-  -fmerge-all-constants
-  -ffunction-sections
-  -fdata-sections
-  
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
-
-board_upload.offset_address = 0x08000000
-upload_protocol = stlink
-
-lib_deps =
-  ${env.lib_deps}
-  charlesbaynham/OSFS@^1.2.3
-  jgromes/RadioLib@7.0.2
-  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
-
-lib_ignore =
-  mathertel/OneButton@2.6.1
-  Wire

arch/stm32/stm32wl5e.ini

@@ -0,0 +1,28 @@
+[stm32wl5e_base]
+platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
+platform = ststm32
+board = generic_wl5e
+framework = arduino
+
+build_type = debug
+
+build_flags = 
+  ${arduino_base.build_flags}
+  -Isrc/platform/stm32wl -g
+  -DconfigUSE_CMSIS_RTOS_V2=1
+  -DVECT_TAB_OFFSET=0x08000000
+  
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
+lib_deps =
+  ${env.lib_deps}
+  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
+  https://github.com/littlefs-project/littlefs.git#v2.5.1
+  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
+
+lib_ignore =
+  mathertel/OneButton

bin/base64_to_hex.py

@@ -1,33 +0,0 @@
-import sys
-import base64
-
-def base64_to_hex_string(b64_string):
-    try:
-        # Decode the Base64 string to raw bytes
-        decoded_bytes = base64.b64decode(b64_string)
-    except Exception as e:
-        raise ValueError(f"Invalid Base64 input: {e}")
-    
-    # Check if the decoded result is exactly 32 bytes
-    if len(decoded_bytes) != 32:
-        raise ValueError("Decoded Base64 input must be exactly 32 bytes.")
-    
-    # Convert each byte to its hex representation
-    hex_values = [f"0x{byte:02x}" for byte in decoded_bytes]
-    
-    # Join the formatted hex values with commas
-    formatted_output = "{ " + ", ".join(hex_values) + " };"
-    return formatted_output
-
-if __name__ == "__main__":
-    # Check if a Base64 string was provided in command line arguments
-    if len(sys.argv) != 2:
-        print("Usage: python script.py <base64-string>")
-        sys.exit(1)
-    
-    b64_string = sys.argv[1]
-    try:
-        formatted_hex = base64_to_hex_string(b64_string)
-        print(formatted_hex)
-    except ValueError as e:
-        print(e)

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg update 
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
@@ -35,11 +35,6 @@ cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
 pio run --environment $1 -t buildfs
-cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$VERSION.bin
-# Remove webserver files from the filesystem and rebuild
-ls -l data/static # Diagnostic list of files
-rm -rf data/static
-pio run --environment $1 -t buildfs
 cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -27,4 +27,5 @@ rm -r $OUTDIR/* || true
 platformio pkg update --environment native || platformioFailed
 pio run --environment native || platformioFailed
 cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
-cp bin/native-install.* $OUTDIR
+cp bin/device-install.* $OUTDIR
+cp bin/device-update.* $OUTDIR

bin/build-nrf52.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg update
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
@@ -46,8 +46,3 @@ else
 	cp bin/device-update.* $OUTDIR
 	cp bin/*.uf2 $OUTDIR
 fi
-
-if (echo $1 | grep -q "rak4631"); then
-	echo "Copying hex file"
-	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
-fi

bin/build-rpi2040.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
+platformio pkg update 
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32.sh

@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-
-VERSION=$(bin/buildinfo.py long)
-SHORT_VERSION=$(bin/buildinfo.py short)
-
-OUTDIR=release/
-
-rm -f $OUTDIR/firmware*
-rm -r $OUTDIR/* || true
-
-# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update -e $1
-
-echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
-rm -f .pio/build/$1/firmware.*
-
-# The shell vars the build tool expects to find
-export APP_VERSION=$VERSION
-
-basename=firmware-$1-$VERSION
-
-pio run --environment $1 # -v
-SRCELF=.pio/build/$1/firmware.elf
-cp $SRCELF $OUTDIR/$basename.elf
-
-SRCBIN=.pio/build/$1/firmware.bin
-cp $SRCBIN $OUTDIR/$basename.bin

bin/build-userprefs-json.py

@@ -1,48 +0,0 @@
-import json
-import subprocess
-import re
-
-def get_macros_from_header(header_file):
-    # Run clang to preprocess the header file and capture the output
-    result = subprocess.run(['clang', '-E', '-dM', header_file], capture_output=True, text=True)
-    if result.returncode != 0:
-        raise RuntimeError(f"Clang preprocessing failed: {result.stderr}")
-
-    # Extract macros from the output
-    macros = {}
-    macro_pattern = re.compile(r'#define\s+(\w+)\s+(.*)')
-    for line in result.stdout.splitlines():
-        match = macro_pattern.match(line) 
-        if match and 'USERPREFS_' in line and '_USERPREFS_' not in line:
-            macros[match.group(1)] = match.group(2)
-
-    return macros
-
-def write_macros_to_json(macros, output_file):
-    with open(output_file, 'w') as f:
-        json.dump(macros, f, indent=4)
-
-def main():
-    header_file = 'userPrefs.h'
-    output_file = 'userPrefs.jsonc'
-    # Uncomment all macros in the header file
-    with open(header_file, 'r') as file:
-        lines = file.readlines()
-
-    uncommented_lines = []
-    for line in lines:
-        stripped_line = line.strip().replace('/*', '').replace('*/', '')
-        if stripped_line.startswith('//') and 'USERPREFS_' in stripped_line:
-            # Replace "//"
-            stripped_line = stripped_line.replace('//', '')
-        uncommented_lines.append(stripped_line + '\n')
-
-    with open(header_file, 'w') as file:
-        for line in uncommented_lines:
-                file.write(line)
-    macros = get_macros_from_header(header_file)
-    write_macros_to_json(macros, output_file)
-    print(f"Macros have been written to {output_file}")
-
-if __name__ == "__main__":
-    main()

bin/config-dist.yaml

@@ -1,17 +1,26 @@
-### Many device configs have been moved to /etc/meshtasticd/available.d
-### To activate, simply copy or link the appropriate file into /etc/meshtasticd/config.d
-
 ### Define your devices here using Broadcom pin numbering
 ### Uncomment the block that corresponds to your hardware
 ### Including the "Module:" line!
 ---
 Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
 #  IRQ: 17
 #  Reset: 22
 
+#  Module: sx1262  # pinedio
+#  CS: 0
+#  IRQ: 10
+#  Busy: 11
+#  spidev: spidev0.1
+
 #  Module: RF95  # Adafruit RFM9x
 #  Reset: 25
 #  CS: 7
@@ -43,7 +52,7 @@ Lora:
 #  TXen: x  # TX and RX enable pins
 #  RXen: x
 
-#  spiSpeed: 2000000
+#  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
 
 ### Set gpio chip to use in /dev/. Defaults to 0.
 ### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
@@ -72,6 +81,17 @@ I2C:
 
 Display:
 
+### Waveshare 2.8inch RPi LCD
+#  Panel: ST7789
+#  CS: 8
+#  DC: 22        # Data/Command pin
+#  Backlight: 18
+#  Width: 240
+#  Height: 320
+#  Reset: 27
+#  Rotate: true
+#  Invert: true
+
 ### Waveshare 1.44inch LCD HAT
 #  Panel: ST7735S
 #  CS: 8         #Chip Select
@@ -91,32 +111,6 @@ Display:
 #  Height: 320
 #  Rotate: true
 
-### SHCHV 3.5 RPi TFT+Touchscreen
-#  Panel: ILI9486
-#  spidev: spidev0.0
-#  BusFrequency: 30000000
-#  DC: 24
-#  Reset: 25
-#  Width: 320
-#  Height: 480
-#  OffsetRotate: 2
-
-### TZT 2.0 Inch TFT Display ST7789V 240RGBx320
-#  Panel: ST7789
-#  spidev: spidev0.0
-#  # CS: 8     # can be freely chosen
-#  BusFrequency: 80000000
-#  DC: 24      # can be freely chosen
-#  Width: 320
-#  Height: 240
-#  Reset: 25   # can be freely chosen
-#  Rotate: true
-#  OffsetRotate: 1
-#  Invert: true
-
-### You can also specify the spi device for the display to use
-# spidev: spidev0.0
-
 Touchscreen:
 ### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
 
@@ -128,29 +122,23 @@ Touchscreen:
 #  IRQ: 24
 #  I2CAddr: 0x38
 
-### You can also specify the spi device for the touchscreen to use
-# spidev: spidev0.0
+#  Module: XPT2046 # Waveshare 2.8inch
+#  CS: 7
+#  IRQ: 17
 
-
-Input:
 ### Configure device for direct keyboard input
 
+Input:
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
 ###
 
 Logging:
   LogLevel: info # debug, info, warn, error
-#  TraceFile: /var/log/meshtasticd.json
-#  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
 #  Port: 443 # Port for Webserver & Webservices
-#  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
+#  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
 
 General:
   MaxNodes: 200
-  MaxMessageQueue: 100
-  ConfigDirectory: /etc/meshtasticd/config.d/
-#  MACAddress: AA:BB:CC:DD:EE:FF
-#  MACAddressSource: eth0

bin/config.d/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml

@@ -1,9 +0,0 @@
-##  https://www.mikroe.com/lr-iot-click
-Lora:
-  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
-#  CS: 25
-  IRQ: 10
-  Busy: 12
-#  Reset: 2
-  spidev: spidev2.0
-  DIO3_TCXO_VOLTAGE: 1.6

bin/config.d/OpenWRT_One_mikroBUS_sx1262.yaml

@@ -1,8 +0,0 @@
-Lora:
-  Module: sx1262
-  IRQ: 10
-  Busy: 12
-#  Reset: 2
-  spidev: spidev2.0
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true

bin/config.d/display-waveshare-2.8.yaml

@@ -1,18 +0,0 @@
-Display:
-
-### Waveshare 2.8inch RPi LCD
-  Panel: ST7789
-  CS: 8
-  DC: 22        # Data/Command pin
-  Backlight: 18
-  Width: 240
-  Height: 320
-  Reset: 27
-  Rotate: true
-  Invert: true
-
-Touchscreen:
-### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
-  Module: XPT2046 # Waveshare 2.8inch
-  CS: 7
-  IRQ: 17

bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml

@@ -1,20 +0,0 @@
----
-Lora:
-## Ebyte E80-900M22S
-## This is a bit experimental
-## 
-##
-  Module: lr1121
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO3_TCXO_VOLTAGE: 1.8
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-
-
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml

@@ -1,21 +0,0 @@
----
-Lora:
-## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
-## HT-RA62 (Has internal switching, but whatever)
-## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
-## Will work with any module with or without RF switching, and with TCXO
-  Module: sx1262
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: true
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-  
-General:
-  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml

@@ -1,21 +0,0 @@
----
-Lora:
-## Ebyte E22-900MM22S with no external RF switching setup
-## Waveshare SX126X XXXM, AI Thinker RA-01SH
-## Will work with any module with or without RF switching and no TCXO
-
-  Module: sx1262  
-  gpiochip: 1 # subtract 32 from the gpio numbers
-  DIO2_AS_RF_SWITCH: true
-  DIO3_TCXO_VOLTAGE: false
-  CS: 16 #pin6 / GPIO48 1C0
-  IRQ: 23  #pin17 / GPIO55 1C7
-  Busy: 22 #pin16 / GPIO54 1C6
-  Reset: 25 #pin13 / GPIO57 1D1 
-  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
-#  TXen: bridge to DIO2 on E22 module
-  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
-  spiSpeed: 2000000
-
-General:
-  MACAddressSource: eth0

bin/config.d/lora-MeshAdv-900M30S.yaml

@@ -1,9 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 21
-  IRQ: 16
-  Busy: 20
-  Reset: 18
-  TXen: 13
-  RXen: 12
-  DIO3_TCXO_VOLTAGE: true

bin/config.d/lora-meshstick-1262.yaml

@@ -1,11 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 2
-  Busy: 4
-  spidev: ch341
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  USB_PID: 0x5512
-  USB_VID: 0x1A86

bin/config.d/lora-pinedio-usb-sx1262.yaml

@@ -1,5 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0 
-  IRQ: 10
-  spidev: ch341

bin/config.d/lora-waveshare-sxxx.yaml

@@ -1,8 +0,0 @@
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: 21
-  IRQ: 16
-  Busy: 20
-  Reset: 18
-  SX126X_ANT_SW: 6

bin/device-install.bat

@@ -1,26 +1,16 @@
 @ECHO OFF
 
 set PYTHON=python
-set WEB_APP=0
-
-:: Determine the correct esptool command to use
-where esptool >nul 2>&1
-if %ERRORLEVEL% EQU 0 (
-    set "ESPTOOL_CMD=esptool"
-) else (
-    set "ESPTOOL_CMD=%PYTHON% -m esptool"
-)
 
 goto GETOPTS
 :HELP
-echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web]
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
 echo Flash image file to device, but first erasing and writing system information
 echo.
 echo     -h               Display this help and exit
 echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
 echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
 echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
-echo     --web            Flash WEB APP.
 goto EOF
 
 :GETOPTS
@@ -29,44 +19,37 @@ if /I "%1"=="--help" goto HELP
 if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
 if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
 if /I "%1"=="-P" set PYTHON=%2 & SHIFT
-if /I "%1"=="--web" set WEB_APP=1 & SHIFT
 SHIFT
 IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-    goto HELP
+	goto HELP
 )
 IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
-    %ESPTOOL_CMD% --baud 115200 erase_flash
-    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
+	%PYTHON% -m esptool --baud 115200 erase_flash
+	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 and C3 board's different OTA partition
     IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
         IF x%FILENAME:esp32c3=%==x%FILENAME% (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
         ) else (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
         )
-    ) else (
-        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
+	) else (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
     )
-    IF %WEB_APP%==1 (
-        for %%f in (littlefswebui-*.bin) do (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
-        )
-    ) else (
-        for %%f in (littlefs-*.bin) do (
-            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
-        )
+    for %%f in (littlefs-*.bin) do (
+        %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
     )
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 )
 
 :EOF

bin/device-install.sh

@@ -1,45 +1,22 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
-WEB_APP=false
-
-# Determine the correct esptool command to use
-if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-    ESPTOOL_CMD="$PYTHON -m esptool"
-elif command -v esptool >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool"
-elif command -v esptool.py >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool.py"
-else
-    echo "Error: esptool not found"
-    exit 1
-fi
 
 set -e
 
 # Usage info
 show_help() {
 	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--web]
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, but first erasing and writing system information"
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
-    --web            Flash WEB APP.
 
 EOF
 }
-# Preprocess long options like --web
-for arg in "$@"; do
-    case "$arg" in
-        --web)
-            WEB_APP=true
-            shift # Remove this argument from the list
-            ;;
-    esac
-done
 
 while getopts ":hp:P:f:" opt; do
 	case "${opt}" in
@@ -72,23 +49,19 @@ shift "$((OPTIND - 1))"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	$ESPTOOL_CMD erase_flash
-	$ESPTOOL_CMD write_flash 0x00 ${FILENAME}
+	"$PYTHON" -m esptool erase_flash
+	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
 	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
 		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
+			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
 		else
-			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
+			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
 		fi
 	else
-		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
-	fi
-	if [ "$WEB_APP" = true ]; then
-		$ESPTOOL_CMD write_flash 0x300000 littlefswebui-*.bin
-	else
-		$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
+		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
 	fi
+	"$PYTHON" -m esptool write_flash 0x300000 littlefs-*.bin
 
 else
 	show_help

bin/device-update.bat

@@ -2,14 +2,6 @@
 
 set PYTHON=python
 
-:: Determine the correct esptool command to use
-where esptool >nul 2>&1
-if %ERRORLEVEL% EQU 0 (
-    set "ESPTOOL_CMD=esptool"
-) else (
-    set "ESPTOOL_CMD=%PYTHON% -m esptool"
-)
-
 goto GETOPTS
 :HELP
 echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
@@ -32,17 +24,17 @@ IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-    goto HELP
+	goto HELP
 )
 IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%
-    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
+    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-    goto HELP
+	goto HELP
 )
 
 :EOF

bin/device-update.sh

@@ -2,18 +2,6 @@
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 
-# Determine the correct esptool command to use
-if "$PYTHON" -m esptool version >/dev/null 2>&1; then
-    ESPTOOL_CMD="$PYTHON -m esptool"
-elif command -v esptool >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool"
-elif command -v esptool.py >/dev/null 2>&1; then
-    ESPTOOL_CMD="esptool.py"
-else
-    echo "Error: esptool not found"
-    exit 1
-fi
-
 # Usage info
 show_help() {
 cat << EOF
@@ -21,7 +9,7 @@ Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
-    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     
@@ -42,7 +30,7 @@ while getopts ":hp:P:f:" opt; do
         f)  FILENAME=${OPTARG}
             ;;
         *)
- 	        echo "Invalid flag."
+ 	    echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -57,7 +45,7 @@ shift "$((OPTIND-1))"
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
 	printf "Trying to flash update ${FILENAME}"
-	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
+	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
 else
 	show_help
 	echo "Invalid file: ${FILENAME}"

bin/generate_ci_matrix.py

@@ -6,7 +6,6 @@ import configparser
 import json
 import os
 import sys
-import random
 
 rootdir = "variants/"
 
@@ -40,7 +39,5 @@ for subdir, dirs, files in os.walk(rootdir):
                             "check" in options
                         ):
                             outlist.append(section)
-if ("quick" in options) & (len(outlist) > 3):
-    print(json.dumps(random.sample(outlist, 3)))
-else:
-    print(json.dumps(outlist))
+
+print(json.dumps(outlist))

bin/meshtasticd.service

@@ -1,16 +1,12 @@
 [Unit]
 Description=Meshtastic Native Daemon
 After=network-online.target
-StartLimitInterval=200
-StartLimitBurst=5
 
 [Service]
 User=root
 Group=root
 Type=simple
 ExecStart=/usr/sbin/meshtasticd
-Restart=always
-RestartSec=3
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=multi-user.target

bin/native-install.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
-mkdir -p /etc/meshtasticd
+mkdir /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
 else

bin/platformio-custom.py

@@ -1,15 +1,13 @@
-#!/usr/bin/env python3
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
-import json
-import re
 
 from readprops import readProps
 
 Import("env")
 platform = env.PioPlatform()
+board = env.GetProjectOption("board")
 
 
 def esp32_create_combined_bin(source, target, env):
@@ -80,49 +78,20 @@ if platform.name == "espressif32":
     else:
         # For newer ESP32 targets, using newlib nano works better.
         env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
-
-if platform.name == "nordicnrf52":
-    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
-                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
-                                        "Generating UF2 file"))
+    if board == "ttgo-t-beam":
+        print("patching esp32 libs")
+        env.Execute("tar -xvf bin/arduino-esp32-libs-release_*tar.gz -C ~/.platformio/packages/framework-arduinoespressif32/")
 
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
-
-jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
-with open(jsonLoc) as f:
-    jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
-    userPrefs = json.loads(jsonStr)
-
-pref_flags = []
-# Pre-process the userPrefs
-for pref in userPrefs:
-    if userPrefs[pref].startswith("{"):
-        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
-    elif userPrefs[pref].replace(".", "").isdigit():
-        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
-    elif userPrefs[pref] == "true" or userPrefs[pref] == "false":
-        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
-    elif userPrefs[pref].startswith("meshtastic_"):
-        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
-    # If the value is a string, we need to wrap it in quotes
-    else:
-        pref_flags.append("-D" + pref + "=" + env.StringifyMacro(userPrefs[pref]) + "")
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"])
 
 # General options that are passed to the C and C++ compilers
-flags = [
+projenv.Append(
+    CCFLAGS=[
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
-        "-DAPP_ENV=" + env.get("PIOENV"),
-    ] + pref_flags
-
-print ("Using flags:")
-for flag in flags:
-    print(flag)
-    
-projenv.Append(
-    CCFLAGS=flags,
+    ]
 )

bin/readprops.py

@@ -1,5 +1,9 @@
-import configparser
+
+
 import subprocess
+import configparser
+import traceback
+import sys
 
 
 def readProps(prefsLoc):
@@ -7,36 +11,27 @@ def readProps(prefsLoc):
 
     config = configparser.RawConfigParser()
     config.read(prefsLoc)
-    version = dict(config.items("VERSION"))
-    verObj = dict(
-        short="{}.{}.{}".format(version["major"], version["minor"], version["build"]),
-        long="unset",
-    )
+    version = dict(config.items('VERSION'))
+    verObj = dict(short = "{}.{}.{}".format(version["major"], version["minor"], version["build"]),
+        long = "unset")
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
-        sha = (
-            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
-            .decode("utf-8")
-            .strip()
-        )
-        isDirty = (
-            subprocess.check_output(["git", "diff", "HEAD"]).decode("utf-8").strip()
-        )
+        sha = subprocess.check_output(
+            ['git', 'rev-parse', '--short', 'HEAD']).decode("utf-8").strip()
+        isDirty = subprocess.check_output(
+            ['git', 'diff', 'HEAD']).decode("utf-8").strip()
         suffix = sha
         # if isDirty:
         #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
         #     suffix = sha + "-d"
-        verObj["long"] = "{}.{}.{}.{}".format(
-            version["major"], version["minor"], version["build"], suffix
-        )
+        verObj['long'] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix)
     except:
         # print("Unexpected error:", sys.exc_info()[0])
         # traceback.print_exc()
-        verObj["long"] = verObj["short"]
+        verObj['long'] = verObj['short']
 
     # print("firmware version " + verStr)
     return verObj
-
-
 # print("path is" + ','.join(sys.path))

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,10 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.9 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.9"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.9/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

bin/wio_tracker_bootloader_update.bin

@@ -1,30 +0,0 @@
-# tips from mark on how to replace the (broken) bootloader on the red wio_tracker_1110 boards.
-
-~/.platformio/penv/bin/adafruit-nrfutil --verbose dfu serial --package wio_tracker_1110_bootloader-0.9.1_s140_7.3.0.zip -p /dev/ttyACM1 -b 115200 --singlebank --touch 1200
-
-exit
-
-# Output should look like
-
-Upgrading target on /dev/ttyACM1 with DFU package /home/kevinh/development/meshtastic/WioWM1110/wio_tracker_1110_bootloader-0.9.1_s140_7.3.0.zip. Flow control is disabled, Single bank, Touch 1200
-Touched serial port /dev/ttyACM1
-Opened serial port /dev/ttyACM1
-Starting DFU upgrade of type 3, SoftDevice size: 152728, bootloader size: 39000, application size: 0
-Sending DFU start packet
-Sending DFU init packet
-Sending firmware file
-########################################
-########################################
-########################################
-########################################
-########################################
-########################################
-########################################
-########################################
-########################################
-###############
-Activating new firmware
-
-DFU upgrade took 20.242434978485107s
-Device programmed.
-

boards/CDEBYTE_EoRa-S3.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "CDEBYTE_EoRa-S3"
   },
-  "connectivity": ["wifi", "bluetooth"],
+  "connectivity": ["wifi"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/ESP32-S3-WROOM-1-N4.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "ESP32-S3-WROOM-1-N4"
   },
-  "connectivity": ["wifi", "bluetooth"],
+  "connectivity": ["wifi"],
   "debug": {
     "default_tool": "esp-builtin",
     "onboard_tools": ["esp-builtin"],

boards/bpi_picow_esp32_s3.json

@@ -28,8 +28,6 @@
     "flash_size": "8MB",
     "maximum_ram_size": 327680,
     "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
     "require_upload_port": true,
     "speed": 921600
   },

boards/esp32-s3-zero.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "partitions": "default.csv",
-      "memory_type": "qio_qspi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DARDUINO_ESP32S3_DEV",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DBOARD_HAS_PSRAM"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "psram_type": "qio",
-    "hwids": [["0x303A", "0x1001"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3"
-  },
-  "connectivity": ["wifi", "bluetooth"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "platforms": ["espressif32"],
-  "name": "Espressif ESP32-S3-FH4R2 (4 MB QD, 2MB PSRAM)",
-  "upload": {
-    "flash_size": "4MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 4194304,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
-  "vendor": "Espressif"
-}

boards/generic_wl5e.json

@@ -1,8 +1,5 @@
 {
   "build": {
-    "arduino": {
-      "variant_h": "variant_RAK3172_MODULE.h"
-    },
     "core": "stm32",
     "cpu": "cortex-m4",
     "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",

boards/heltec_mesh_node_t114.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],

boards/heltec_vision_master_e290.json

@@ -1,42 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [
-      ["0x303A", "0x1001"],
-      ["0x303A", "0x0002"]
-    ],
-    "mcu": "esp32s3",
-    "variant": "heltec_vision_master_e290"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "Heltec Vision Master E290",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://heltec.org/project/vision-master-e290/",
-  "vendor": "Heltec"
-}