More lines of environmental telemetry on-screen (#5853)

* Fix NRF52 default append write mode of files

* Inside the lock

.devcontainer/99-platformio-udev.rules

@@ -0,0 +1,183 @@
+# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#####################################################################################
+#
+# INSTALLATION
+#
+# Please visit > https://docs.platformio.org/en/latest/core/installation/udev-rules.html
+#
+#####################################################################################
+
+#
+# Boards
+#
+
+# CP210X USB UART
+ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea[67][013]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="80a9", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# FT231XS USB UART
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Prolific Technology, Inc. PL2303 Serial Port
+ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# QinHeng Electronics HL-340 USB-Serial adapter
+ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+# QinHeng Electronics CH343 USB-Serial adapter
+ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d3", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+# QinHeng Electronics CH9102 USB-Serial adapter
+ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d4", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Arduino boards
+ATTRS{idVendor}=="2341", ATTRS{idProduct}=="[08][023]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="[08][02]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Arduino SAM-BA
+ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{MTP_NO_PROBE}="1"
+
+# Digistump boards
+ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Maple with DFU
+ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="000[34]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# USBtiny
+ATTRS{idProduct}=="0c9f", ATTRS{idVendor}=="1781", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# USBasp V2.0
+ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Teensy boards
+ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789A]?", ENV{MTP_NO_PROBE}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789ABCD]?", MODE:="0666"
+KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", MODE:="0666"
+
+# TI Stellaris Launchpad
+ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TI MSP430 Launchpad
+ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f432", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# GD32V DFU Bootloader
+ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="0189", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# FireBeetle-ESP32
+ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7522", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Wio Terminal
+ATTRS{idVendor}=="2886", ATTRS{idProduct}=="[08]02d", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Raspberry Pi Pico
+ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="[01]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# AIR32F103
+ATTRS{idVendor}=="0d28", ATTRS{idProduct}=="0204", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# STM32 virtual COM port
+ATTRS{idVendor}=="0483", ATTRS{idProduct}=="5740", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+#
+# Debuggers
+#
+
+# Black Magic Probe
+SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic GDB Server", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic UART Port", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# opendous and estick
+ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Original FT232/FT245/FT2232/FT232H/FT4232
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="60[01][104]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# DISTORTEC JTAG-lock-pick Tiny 2
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TUMPA, TUMPA Lite
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a9[89]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# XDS100v2
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Xverve Signalyzer Tool (DT-USB-ST), Signalyzer LITE (DT-USB-SLITE)
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TI/Luminary Stellaris Evaluation Board FTDI (several)
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd[9a]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# egnite Turtelizer 2
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Section5 ICEbear
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c14[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Amontec JTAGkey and JTAGkey-tiny
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TI ICDI
+ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# STLink probes
+ATTRS{idVendor}=="0483", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Hilscher NXHX Boards
+ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Hitex probes
+ATTRS{idVendor}=="0640", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Altera USB Blaster
+ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Amontec JTAGkey-HiSpeed
+ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# SEGGER J-Link
+ATTRS{idVendor}=="1366", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Raisonance RLink
+ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Debug Board for Neo1973
+ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Olimex probes
+ATTRS{idVendor}=="15ba", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# USBprog with OpenOCD firmware
+ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
+ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Marvell Sheevaplug
+ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Keil Software, Inc. ULink
+ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2710", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# CMSIS-DAP compatible adapters
+ATTRS{product}=="*CMSIS-DAP*", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Atmel AVR Dragon
+ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2107", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Espressif USB JTAG/serial debug unit
+ATTRS{idVendor}=="303a", ATTRS{idProduct}=="1001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Zephyr framework USB CDC-ACM
+ATTRS{idVendor}=="2fe3", ATTRS{idProduct}=="0100", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"

.devcontainer/Dockerfile

@@ -1,6 +1,9 @@
 FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
 
-# [Optional] Uncomment this section to install additional packages.
+USER root
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages
 RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     && apt-get -y install --no-install-recommends \
     ca-certificates \
@@ -20,6 +23,16 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     python3-wheel \
     wget \
     zip \
+    usbutils \
+    hwdata \
+    gpg \
+    gnupg2 \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
-RUN pipx install platformio==6.1.15
+RUN pipx install platformio==6.1.15
+
+COPY 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules
+
+USER vscode
+
+HEALTHCHECK NONE

.devcontainer/devcontainer.json

@@ -13,13 +13,24 @@
   },
   "customizations": {
     "vscode": {
-      "extensions": ["ms-vscode.cpptools", "platformio.platformio-ide"]
+      "extensions": [
+        "ms-vscode.cpptools",
+        "platformio.platformio-ide",
+        "Trunk.io"
+      ],
+      "unwantedRecommendations": ["ms-azuretools.vscode-docker"],
+      "settings": {
+        "extensions.ignoreRecommendations": true
+      }
     }
   },
 
   // Use 'forwardPorts' to make a list of ports inside the container available locally.
   "forwardPorts": [4403],
 
+  // Use "--device=" to make a local device available inside the container.
+  // "runArgs": ["--device=/dev/ttyACM0"],
+
   // Run commands to prepare the container for use
   "postCreateCommand": ".devcontainer/setup.sh"
 }

.env.example

@@ -0,0 +1,4 @@
+# Absolute path to the local meshtastic config.yaml file
+CONFIG_PATH=/path/to/meshtastic/config.yaml
+# USB device to passthrough (`lsusb -t`: look for `ch341`)
+USB_DEVICE=/dev/bus/usb/001/037

.github/actions/build-variant/action.yml

@@ -51,6 +51,7 @@ runs:
         file: build.tar
         target: build.tar
         token: ${{ inputs.github_token }}
+        version: tags/v2.5.3
 
     - name: Unpack web ui
       if: inputs.include-web-ui == 'true'
@@ -67,6 +68,12 @@ runs:
           sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
         done
 
+    - name: PlatformIO ${{ inputs.arch }} download cache
+      uses: actions/cache@v4
+      with:
+        path: ~/.platformio/.cache
+        key: pio-cache-${{ inputs.arch }}-${{ hashFiles('.github/actions/**', '**.ini') }}
+
     - name: Build ${{ inputs.board }}
       shell: bash
       run: ${{ inputs.build-script-path }} ${{ inputs.board }}
@@ -82,13 +89,13 @@ runs:
 
     - name: Get release version string
       shell: bash
-      run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+      run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
       id: version
 
     - name: Store binaries as an artifact
       uses: actions/upload-artifact@v4
       with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.long }}.zip
         overwrite: true
         path: |
           ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -20,19 +20,16 @@ runs:
       shell: bash
       run: |
         sudo apt-get -y update --fix-missing
-        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev
+        sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev lsb-release
 
     - name: Setup Python
       uses: actions/setup-python@v5
       with:
         python-version: 3.x
-
-    # - name: Cache python libs
-    #   uses: actions/cache@v4
-    #   id: cache-pip # needed in if test
-    #   with:
-    #     path: ~/.cache/pip
-    #     key: ${{ runner.os }}-pip
+        cache: pip
+        cache-dependency-path: |
+          .github/actions/**
+          **.ini
 
     - name: Upgrade python tools
       shell: bash

.github/actions/setup-native/action.yml

@@ -0,0 +1,14 @@
+name: Setup native build
+description: Install libraries needed for building the Native/Portduino build
+
+runs:
+  using: composite
+  steps:
+    - name: Setup base
+      id: base
+      uses: ./.github/actions/setup-base
+
+    - name: Install libs needed for native build
+      shell: bash
+      run: |
+        sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev

.github/workflows/build_debian_src.yml

@@ -0,0 +1,72 @@
+name: Build Debian Source Package
+
+on:
+  workflow_call:
+    secrets:
+      PPA_GPG_PRIVATE_KEY:
+        required: true
+    inputs:
+      series:
+        description: Ubuntu/Debian series to target
+        required: true
+        type: string
+      build_location:
+        description: Location where build will execute
+        required: true
+        type: string
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-debian-src:
+    runs-on: ubuntu-24.04
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Install deps
+        shell: bash
+        working-directory: meshtasticd
+        run: |
+          sudo apt-get update -y --fix-missing
+          sudo apt-get install -y software-properties-common build-essential devscripts equivs
+          sudo add-apt-repository ppa:meshtastic/build-tools -y
+          sudo apt-get update -y --fix-missing
+          sudo mk-build-deps --install --remove --tool='apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends --yes' debian/control
+
+      - name: Import GPG key
+        uses: crazy-max/ghaction-import-gpg@v6
+        with:
+          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
+        id: gpg
+
+      - name: Get release version string
+        working-directory: meshtasticd
+        run: |
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        env:
+          BUILD_LOCATION: ${{ inputs.build_location }}
+        id: version
+
+      - name: Fetch libdeps, package debian source
+        working-directory: meshtasticd
+        run: debian/ci_pack_sdeb.sh
+        env:
+          SERIES: ${{ inputs.series }}
+          GPG_KEY_ID: ${{ steps.gpg.outputs.keyid }}
+          PKG_VERSION: ${{ steps.version.outputs.deb }}
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
+          overwrite: true
+          path: |
+            meshtasticd_${{ steps.version.outputs.deb }}*

.github/workflows/build_docker.yml

@@ -0,0 +1,51 @@
+name: Build Docker
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-native:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Docker login
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        uses: docker/login-action@v3
+        with:
+          username: meshtastic
+          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
+
+      - name: Docker setup
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        uses: docker/setup-buildx-action@v3
+
+      - name: Docker build and push tagged versions
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        uses: docker/build-push-action@v6
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/meshtasticd:${{ steps.version.outputs.long }}
+
+      - name: Docker build and push
+        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        uses: docker/build-push-action@v6
+        with:
+          context: .
+          file: ./Dockerfile
+          push: true
+          tags: meshtastic/meshtasticd:latest

.github/workflows/build_esp32.yml

@@ -7,6 +7,8 @@ on:
         required: true
         type: string
 
+permissions: read-all
+
 jobs:
   build-esp32:
     runs-on: ubuntu-latest
@@ -24,6 +26,7 @@ jobs:
             ./arch/esp32/esp32s2.ini
             ./arch/esp32/esp32s3.ini
             ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
           build-script-path: bin/build-esp32.sh
           ota-firmware-source: firmware.bin
           ota-firmware-target: release/bleota.bin

.github/workflows/build_esp32_c3.yml

@@ -26,10 +26,12 @@ jobs:
             ./arch/esp32/esp32s2.ini
             ./arch/esp32/esp32s3.ini
             ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
           build-script-path: bin/build-esp32.sh
           ota-firmware-source: firmware-c3.bin
           ota-firmware-target: release/bleota-c3.bin
           artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true
           arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -33,4 +33,5 @@ jobs:
           artifact-paths: |
             release/*.bin
             release/*.elf
+          include-web-ui: true
           arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -7,6 +7,8 @@ on:
         required: true
         type: string
 
+permissions: read-all
+
 jobs:
   build-esp32-s3:
     runs-on: ubuntu-latest
@@ -24,6 +26,7 @@ jobs:
             ./arch/esp32/esp32s2.ini
             ./arch/esp32/esp32s3.ini
             ./arch/esp32/esp32c3.ini
+            ./arch/esp32/esp32c6.ini
           build-script-path: bin/build-esp32.sh
           ota-firmware-source: firmware-s3.bin
           ota-firmware-target: release/bleota-s3.bin

.github/workflows/build_native.yml

@@ -10,12 +10,6 @@ jobs:
   build-native:
     runs-on: ubuntu-latest
     steps:
-      - name: Install libs needed for native build
-        shell: bash
-        run: |
-          sudo apt-get update --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
-
       - name: Checkout code
         uses: actions/checkout@v4
         with:
@@ -23,63 +17,22 @@ jobs:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - name: Upgrade python tools
-        shell: bash
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio adafruit-nrfutil
-          pip install -U meshtastic --pre
-
-      - name: Upgrade platformio
-        shell: bash
-        run: |
-          pio upgrade
+      - name: Setup native build
+        id: base
+        uses: ./.github/actions/setup-native
 
       - name: Build Native
         run: bin/build-native.sh
 
       - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          name: firmware-native-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: |
             release/meshtasticd_linux_x86_64
             bin/config-dist.yaml
-
-      - name: Docker login
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/login-action@v3
-        continue-on-error: true # FIXME: Failing docker login auth
-        with:
-          username: meshtastic
-          password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
-
-      - name: Docker setup
-        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/setup-buildx-action@v3
-
-      - name: Docker build and push tagged versions
-        if: ${{ github.event_name == 'workflow_dispatch' }}
-        continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v6
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/device-simulator:${{ steps.version.outputs.version }}
-
-      - name: Docker build and push
-        if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v6
-        with:
-          context: .
-          file: ./Dockerfile
-          push: true
-          tags: meshtastic/device-simulator:latest

.github/workflows/build_raspbian.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          apt-get update -y --fix-missing
-          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+          sudo apt-get update -y --fix-missing
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
 
       - name: Checkout code
         uses: actions/checkout@v4
@@ -39,13 +39,13 @@ jobs:
         run: bin/build-native.sh
 
       - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          name: firmware-raspbian-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: |
             release/meshtasticd_linux_aarch64

.github/workflows/build_raspbian_armv7l.yml

@@ -13,8 +13,8 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          apt-get update -y --fix-missing
-          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+          sudo apt-get update -y --fix-missing
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev
 
       - name: Checkout code
         uses: actions/checkout@v4
@@ -39,13 +39,13 @@ jobs:
         run: bin/build-native.sh
 
       - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Store binaries as an artifact
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: |
             release/meshtasticd_linux_armv7l

.github/workflows/daily_packaging.yml

@@ -0,0 +1,45 @@
+name: Daily Packaging
+on:
+  schedule:
+    - cron: 0 9 * * *
+  workflow_dispatch:
+  push:
+    branches:
+      - master
+    paths:
+      - debian/**
+      - "*.rpkg"
+      - .github/workflows/nightly_packaging.yml
+      - .github/workflows/build_debian_src.yml
+      - .github/workflows/package_ppa.yml
+      - .github/workflows/package_obs.yml
+      - .github/workflows/hook_copr.yml
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  package-ppa:
+    strategy:
+      fail-fast: false
+      matrix:
+        series: [plucky, oracular, noble, jammy]
+    uses: ./.github/workflows/package_ppa.yml
+    with:
+      ppa_repo: ppa:meshtastic/daily
+      series: ${{ matrix.series }}
+    secrets: inherit
+
+  package-obs:
+    uses: ./.github/workflows/package_obs.yml
+    with:
+      obs_project: home:meshtastic:daily
+      series: unstable
+    secrets: inherit
+
+  hook-copr:
+    uses: ./.github/workflows/hook_copr.yml
+    with:
+      copr_project: daily
+    secrets: inherit

.github/workflows/hook_copr.yml

@@ -0,0 +1,61 @@
+name: Trigger COPR build
+
+on:
+  workflow_call:
+    secrets:
+      COPR_HOOK_DAILY:
+      COPR_HOOK_ALPHA:
+      COPR_HOOK_BETA:
+    inputs:
+      copr_project:
+        description: COPR project to target
+        required: true
+        type: string
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-copr-hook:
+    runs-on: ubuntu-24.04
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{ github.ref }}
+          repository: ${{ github.repository }}
+
+      - name: Install Python dependencies
+        run: |
+          pip install requests
+
+      - name: Trigger COPR build
+        shell: python
+        run: |
+          import requests
+
+          project_name = "${{ inputs.copr_project }}"
+          if project_name == "daily":
+            hook_secret = "${{ secrets.COPR_HOOK_DAILY }}"
+            project_id = 160277
+          elif project_name == "alpha":
+            hook_secret = "${{ secrets.COPR_HOOK_ALPHA }}"
+            project_id = 160278
+          elif project_name == "beta":
+            hook_secret = "${{ secrets.COPR_HOOK_BETA }}"
+            project_id = 160279
+          else:
+            raise ValueError(f"Unknown COPR project: {project_name}")
+
+          webhook_url = f"https://copr.fedorainfracloud.org/webhooks/github/{project_id}/{hook_secret}/meshtasticd/"
+          copr_payload = {
+            "ref": "${{ github.ref }}",
+            "after": "${{ github.sha }}",
+            "repository": {
+              "clone_url": "${{ github.server_url }}/${{ github.repository }}.git",
+            }
+          }
+          r = requests.post(webhook_url, json=copr_payload, headers={"X-GitHub-Event": "push"})
+          r.raise_for_status()

.github/workflows/main_matrix.yml

@@ -37,7 +37,7 @@ jobs:
           else  
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} Head: ${{ github.head_ref }} Ref: ${{ github.ref }} Targets: $TARGETS"
+          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
@@ -137,6 +137,21 @@ jobs:
   package-native:
     uses: ./.github/workflows/package_amd64.yml
 
+  build-debian-src:
+    uses: ./.github/workflows/build_debian_src.yml
+    with:
+      series: UNRELEASED
+      build_location: local
+    secrets: inherit
+
+  test-native:
+    uses: ./.github/workflows/test_native.yml
+
+  build-docker:
+    if: ${{ github.event_name == 'workflow_dispatch' }}
+    uses: ./.github/workflows/build_docker.yml
+    secrets: inherit
+
   after-checks:
     runs-on: ubuntu-latest
     if: ${{ github.event_name != 'workflow_dispatch' }}
@@ -184,7 +199,7 @@ jobs:
         run: ls -R
 
       - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Move files up
@@ -193,7 +208,7 @@ jobs:
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -203,13 +218,14 @@ jobs:
             ./device-*.sh
             ./device-*.bat
             ./littlefs-*.bin
+            ./littlefswebui-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 30
 
       - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -223,12 +239,12 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
@@ -236,8 +252,8 @@ jobs:
       - uses: scruplelesswizard/comment-artifact@main
         if: ${{ github.event_name == 'pull_request' }}
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
-          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip. This artifact will be available for 90 days from creation"
+          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
+          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip. This artifact will be available for 90 days from creation"
           github-token: ${{ secrets.GITHUB_TOKEN }}
 
   release-artifacts:
@@ -251,6 +267,7 @@ jobs:
         package-raspbian,
         package-raspbian-armv7l,
         package-native,
+        build-debian-src,
       ]
     steps:
       - name: Checkout
@@ -262,73 +279,70 @@ jobs:
           python-version: 3.x
 
       - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: |
+          echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
         id: version
+        env:
+          BUILD_LOCATION: local
 
       - name: Create release
-        uses: actions/create-release@v1
+        uses: softprops/action-gh-release@v2
         id: create_release
         with:
           draft: true
           prerelease: true
-          release_name: Meshtastic Firmware ${{ steps.version.outputs.version }} Alpha
-          tag_name: v${{ steps.version.outputs.version }}
+          name: Meshtastic Firmware ${{ steps.version.outputs.long }} Alpha
+          tag_name: v${{ steps.version.outputs.long }}
           body: |
             Autogenerated by github action, developer should edit as required before publishing...
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
 
       - name: Download deb files
         uses: actions/download-artifact@v4
         with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          pattern: meshtasticd_${{ steps.version.outputs.long }}_*.deb
           merge-multiple: true
           path: ./output
 
+      - name: Download source deb
+        uses: actions/download-artifact@v4
+        with:
+          pattern: firmware-debian-${{ steps.version.outputs.deb }}~UNRELEASED-src
+          merge-multiple: true
+          path: ./output/debian-src
+
+      - name: Zip source deb
+        working-directory: output
+        run: zip -j -9 -r ./meshtasticd-${{ steps.version.outputs.deb }}-src.zip ./debian-src
+
       # For diagnostics
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add raspbian aarch64 .deb
-        uses: actions/upload-release-asset@v1
+      - name: Add deb files to release
+        run: |
+          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd_${{ steps.version.outputs.long }}_arm64.deb
+          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd_${{ steps.version.outputs.long }}_armhf.deb
+          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd_${{ steps.version.outputs.long }}_amd64.deb
+          gh release upload v${{ steps.version.outputs.long }} ./output/meshtasticd-${{ steps.version.outputs.deb }}-src.zip
         env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
-          asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
-          asset_content_type: application/vnd.debian.binary-package
-
-      - name: Add raspbian armv7l .deb
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
-          asset_name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
-          asset_content_type: application/vnd.debian.binary-package
-
-      - name: Add raspbian amd64 .deb
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
-          asset_name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
-          asset_content_type: application/vnd.debian.binary-package
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Bump version.properties
         run: >-
           bin/bump_version.py
 
+      - name: Update debian changelog
+        run: >-
+          debian/ci_changelog.sh
+
       - name: Create version.properties pull request
         uses: peter-evans/create-pull-request@v7
         with:
           title: Bump version.properties
           add-paths: |
             version.properties
+            debian/changelog
 
   release-firmware:
     strategy:
@@ -348,12 +362,12 @@ jobs:
           python-version: 3.x
 
       - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - uses: actions/download-artifact@v4
         with:
-          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}
           merge-multiple: true
           path: ./output
 
@@ -366,37 +380,24 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./output
 
       - uses: actions/download-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
           path: ./elfs
 
-      - name: Zip firmware
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./elfs
+      - name: Zip debug elfs
+        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip ./elfs
 
       # For diagnostics
       - name: Display structure of downloaded files
         run: ls -lR
 
-      - name: Add bins to release
-        uses: actions/upload-release-asset@v1
+      - name: Add bins and debug elfs to release
+        run: |
+          gh release upload v${{ steps.version.outputs.long }} ./firmware-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
+          gh release upload v${{ steps.version.outputs.long }} ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.long }}.zip
         env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
-
-      - name: Add debug elfs to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/package_amd64.yml

@@ -32,13 +32,13 @@ jobs:
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download artifacts
         uses: actions/download-artifact@v4
         with:
-          name: firmware-native-${{ steps.version.outputs.version }}.zip
+          name: firmware-native-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -47,35 +47,44 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/share/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
           mkdir -p .debpkg/etc/meshtasticd/config.d
           mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
-          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
+          shopt -s dotglob nullglob
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
+          gunzip .debpkg/usr/share/meshtasticd/web/ -r
           cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
+          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
+          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
+          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
+          chmod +x .debpkg/DEBIAN/preinst
+          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
+          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:
           package: meshtasticd
           package_root: .debpkg
           maintainer: Jonathan Bennett
-          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          version: ${{ steps.version.outputs.long }} # refs/tags/v*.*.*
           arch: amd64
-          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4
         with:
-          name: meshtasticd_${{ steps.version.outputs.version }}_amd64.deb
+          name: meshtasticd_${{ steps.version.outputs.long }}_amd64.deb
           overwrite: true
           path: |
             ./*.deb

.github/workflows/package_obs.yml

@@ -0,0 +1,110 @@
+name: Package for OpenSUSE Build Service
+
+on:
+  workflow_call:
+    secrets:
+      OBS_PASSWORD:
+        required: true
+      PPA_GPG_PRIVATE_KEY:
+        required: true
+    inputs:
+      obs_project:
+        description: Meshtastic OBS project to target
+        required: true
+        type: string
+      series:
+        description: Debian series to target
+        required: true
+        type: string
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-debian-src:
+    uses: ./.github/workflows/build_debian_src.yml
+    secrets: inherit
+    with:
+      series: ${{ inputs.series }}
+      build_location: obs
+
+  package-obs:
+    runs-on: ubuntu-24.04
+    needs: build-debian-src
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Install OpenSUSE Build Service deps
+        shell: bash
+        run: |
+          echo 'deb http://download.opensuse.org/repositories/openSUSE:/Tools/xUbuntu_24.04/ /' | sudo tee /etc/apt/sources.list.d/openSUSE:Tools.list
+          curl -fsSL https://download.opensuse.org/repositories/openSUSE:Tools/xUbuntu_24.04/Release.key | gpg --dearmor | sudo tee /etc/apt/trusted.gpg.d/openSUSE_Tools.gpg > /dev/null
+          sudo apt-get update -y --fix-missing
+          sudo apt-get install -y osc
+
+      - name: Get release version string
+        working-directory: meshtasticd
+        run: |
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        env:
+          BUILD_LOCATION: obs
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -lah
+
+      - name: Configure osc
+        env:
+          OBS_USERNAME: meshtastic
+        run: |
+          # Setup OpenSUSE Build Service credentials
+          mkdir -p ~/.config/osc
+          echo "[general]" > ~/.config/osc/oscrc
+          echo "apiurl=https://api.opensuse.org" >> ~/.config/osc/oscrc
+          echo "[https://api.opensuse.org]" >> ~/.config/osc/oscrc
+          echo "user=${{ env.OBS_USERNAME }}" >> ~/.config/osc/oscrc
+          echo "pass=${{ secrets.OBS_PASSWORD }}" >> ~/.config/osc/oscrc
+          echo "credentials_mgr_class=osc.credentials.PlaintextConfigFileCredentialsManager" >> ~/.config/osc/oscrc
+          # Create a temporary directory for osc checkout
+          mkdir -p osc
+
+      # Intentionally fail if credentials are invalid
+      # Update secrets if this returns `401`
+      - name: Verify OBS authentication
+        run: osc token
+
+      - name: Upload package to OBS
+        shell: bash
+        working-directory: osc
+        env:
+          OBS_PROJECT: ${{ inputs.obs_project }}
+          OBS_PACKAGE: meshtasticd
+        run: |
+          # Initialize the package in the current directory
+          osc checkout --output-dir . $OBS_PROJECT $OBS_PACKAGE
+
+          # Remove the existing package files
+          rm -rf *.dsc *.tar.xz
+
+          # Copy new package files to the directory
+          cp $GITHUB_WORKSPACE/*.dsc .
+          cp $GITHUB_WORKSPACE/*.tar.xz .
+
+          # Add/Remove the files
+          osc addremove
+
+          # Commit changes and push to OpenSUSE Build Service
+          osc commit -m "GitHub Actions: ${{ steps.version.outputs.deb }}~${{ inputs.series }}"

.github/workflows/package_ppa.yml

@@ -0,0 +1,74 @@
+name: Package for Launchpad PPA
+
+on:
+  workflow_call:
+    secrets:
+      PPA_GPG_PRIVATE_KEY:
+        required: true
+    inputs:
+      ppa_repo:
+        description: Meshtastic PPA to target
+        required: true
+        type: string
+      series:
+        description: Ubuntu series to target
+        required: true
+        type: string
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-debian-src:
+    uses: ./.github/workflows/build_debian_src.yml
+    secrets: inherit
+    with:
+      series: ${{ inputs.series }}
+      build_location: ppa
+
+  package-ppa:
+    runs-on: ubuntu-24.04
+    needs: build-debian-src
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          path: meshtasticd
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Install deps
+        shell: bash
+        run: |
+          sudo apt-get update -y --fix-missing
+          sudo apt-get install -y dput
+
+      - name: Import GPG key
+        uses: crazy-max/ghaction-import-gpg@v6
+        with:
+          gpg_private_key: ${{ secrets.PPA_GPG_PRIVATE_KEY }}
+        id: gpg
+
+      - name: Get release version string
+        working-directory: meshtasticd
+        run: |
+          echo "deb=$(./bin/buildinfo.py deb)" >> $GITHUB_OUTPUT
+        env:
+          BUILD_LOCATION: ppa
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-debian-${{ steps.version.outputs.deb }}~${{ inputs.series }}-src
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -lah
+
+      - name: Publish with dput
+        if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
+        run: |
+          dput ${{ inputs.ppa_repo }} meshtasticd_${{ steps.version.outputs.deb }}~${{ inputs.series }}_source.changes

.github/workflows/package_raspbian.yml

@@ -32,13 +32,13 @@ jobs:
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download artifacts
         uses: actions/download-artifact@v4
         with:
-          name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          name: firmware-raspbian-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -47,35 +47,44 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/share/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
           mkdir -p .debpkg/etc/meshtasticd/config.d
           mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
-          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
+          shopt -s dotglob nullglob
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
+          gunzip .debpkg/usr/share/meshtasticd/web/ -r
           cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
+          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
+          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
+          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
+          chmod +x .debpkg/DEBIAN/preinst
+          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
+          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:
           package: meshtasticd
           package_root: .debpkg
           maintainer: Jonathan Bennett
-          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          version: ${{ steps.version.outputs.long }} # refs/tags/v*.*.*
           arch: arm64
-          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4
         with:
-          name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          name: meshtasticd_${{ steps.version.outputs.long }}_arm64.deb
           overwrite: true
           path: |
             ./*.deb

.github/workflows/package_raspbian_armv7l.yml

@@ -32,13 +32,13 @@ jobs:
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download artifacts
         uses: actions/download-artifact@v4
         with:
-          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.long }}.zip
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -47,35 +47,44 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/share/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
           mkdir -p .debpkg/etc/meshtasticd/config.d
           mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
-          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
+          shopt -s dotglob nullglob
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
+          gunzip .debpkg/usr/share/meshtasticd/web/ -r
           cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
+          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
+          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
+          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
+          chmod +x .debpkg/DEBIAN/preinst
+          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
+          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:
           package: meshtasticd
           package_root: .debpkg
           maintainer: Jonathan Bennett
-          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          version: ${{ steps.version.outputs.long }} # refs/tags/v*.*.*
           arch: armhf
-          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0
           desc: Native Linux Meshtastic binary.
 
       - uses: actions/upload-artifact@v4
         with:
-          name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          name: meshtasticd_${{ steps.version.outputs.long }}_armhf.deb
           overwrite: true
           path: |
             ./*.deb

.github/workflows/release_channels.yml

@@ -0,0 +1,38 @@
+name: Trigger release workflows upon Publish
+
+on:
+  release:
+    types: [published, released]
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  package-ppa:
+    strategy:
+      fail-fast: false
+      matrix:
+        series: [plucky, oracular, noble, jammy]
+    uses: ./.github/workflows/package_ppa.yml
+    with:
+      ppa_repo: |-
+        ppa:meshtastic/${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
+      series: ${{ matrix.series }}
+    secrets: inherit
+
+  package-obs:
+    uses: ./.github/workflows/package_obs.yml
+    with:
+      obs_project: |-
+        home:meshtastic:${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
+      series: |-
+        ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
+    secrets: inherit
+
+  # hook-copr:
+  #   uses: ./.github/workflows/hook_copr.yml
+  #   with:
+  #     copr_project: |-
+  #       ${{ contains(github.event.release.name, 'Beta') && 'beta' || contains(github.event.release.name, 'Alpha') && 'alpha' }}
+  #   secrets: inherit

.github/workflows/test_native.yml

@@ -0,0 +1,169 @@
+name: Run Tests on Native platform
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions: {}
+
+env:
+  LCOV_CAPTURE_FLAGS: --quiet --capture --include "${PWD}/src/*" --exclude '*/src/mesh/generated/*' --directory .pio/build/coverage/src --base-directory "${PWD}"
+
+jobs:
+  simulator-tests:
+    name: Native Simulator Tests
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+          submodules: recursive
+
+      - name: Setup native build
+        id: base
+        uses: ./.github/actions/setup-native
+
+      - name: Install simulator dependencies
+        run: pip install -U dotmap
+
+      # We now run integration test before other build steps (to quickly see runtime failures)
+      - name: Build for native/coverage
+        run: platformio run -e coverage
+
+      - name: Capture initial coverage information
+        shell: bash
+        run: |
+          sudo apt-get install -y lcov
+          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --initial --output-file coverage_base.info
+          sed -i -e "s#${PWD}#.#" coverage_base.info # Make paths relative.
+
+      - name: Integration test
+        run: |
+          .pio/build/coverage/program &
+          PID=$!
+          timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done"
+          echo "Simulator started, launching python test..."
+          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+          wait
+
+      - name: Capture coverage information
+        if: always() # run this step even if previous step failed
+        run: |
+          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name integration --output-file coverage_integration.info
+          sed -i -e "s#${PWD}#.#" coverage_integration.info # Make paths relative.
+
+      - name: Get release version string
+        if: always() # run this step even if previous step failed
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Save coverage information
+        uses: actions/upload-artifact@v4
+        if: always() # run this step even if previous step failed
+        with:
+          name: lcov-coverage-info-native-simulator-test-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: ./coverage_*.info
+
+  platformio-tests:
+    name: Native PlatformIO Tests
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+          submodules: recursive
+
+      - name: Setup native build
+        id: base
+        uses: ./.github/actions/setup-native
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      # Disable (comment-out) BUILD_EPOCH. It causes a full rebuild between tests and resets the
+      # coverage information each time.
+      - name: Disable BUILD_EPOCH
+        run: sed -i 's/-DBUILD_EPOCH=$UNIX_TIME/#-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
+
+      - name: PlatformIO Tests
+        run: platformio test -e coverage -v --junit-output-path testreport.xml
+
+      - name: Save test results
+        if: always() # run this step even if previous step failed
+        uses: actions/upload-artifact@v4
+        with:
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: ./testreport.xml
+
+      - name: Capture coverage information
+        if: always() # run this step even if previous step failed
+        run: |
+          sudo apt-get install -y lcov
+          lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name tests --output-file coverage_tests.info
+          sed -i -e "s#${PWD}#.#" coverage_tests.info # Make paths relative.
+
+      - name: Save coverage information
+        uses: actions/upload-artifact@v4
+        if: always() # run this step even if previous step failed
+        with:
+          name: lcov-coverage-info-native-platformio-tests-${{ steps.version.outputs.long }}.zip
+          overwrite: true
+          path: ./coverage_*.info
+
+  generate-reports:
+    name: Generate Test Reports
+    runs-on: ubuntu-latest
+    permissions: # Needed for dorny/test-reporter.
+      contents: read
+      actions: read
+      checks: write
+    needs:
+      - simulator-tests
+      - platformio-tests
+    if: always()
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download test artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: platformio-test-report-${{ steps.version.outputs.long }}.zip
+          merge-multiple: true
+
+      - name: Test Report
+        uses: dorny/test-reporter@v1.9.1
+        with:
+          name: PlatformIO Tests
+          path: testreport.xml
+          reporter: java-junit
+
+      - name: Download coverage artifacts
+        uses: actions/download-artifact@v4
+        with:
+          pattern: lcov-coverage-info-native-*-${{ steps.version.outputs.long }}.zip
+          path: code-coverage-report
+          merge-multiple: true
+
+      - name: Generate Code Coverage Report
+        run: |
+          sudo apt-get install -y lcov
+          lcov --quiet --add-tracefile code-coverage-report/coverage_base.info --add-tracefile code-coverage-report/coverage_integration.info --add-tracefile code-coverage-report/coverage_tests.info --output-file code-coverage-report/coverage_src.info
+          genhtml --quiet --legend --prefix "${PWD}" code-coverage-report/coverage_src.info --output-directory code-coverage-report
+
+      - name: Save Code Coverage Report
+        uses: actions/upload-artifact@v4
+        with:
+          name: code-coverage-report-${{ steps.version.outputs.long }}.zip
+          path: code-coverage-report

.github/workflows/tests.yml

@@ -6,55 +6,8 @@ on:
   workflow_dispatch: {}
 
 jobs:
-  test-simulator:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Install libbluetooth
-        shell: bash
-        run: |
-          sudo apt-get update --fix-missing
-          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
-
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          submodules: recursive
-
-      - name: Upgrade python tools
-        shell: bash
-        run: |
-          python -m pip install --upgrade pip
-          pip install -U platformio adafruit-nrfutil
-          pip install -U meshtastic --pre
-
-      - name: Upgrade platformio
-        shell: bash
-        run: |
-          pio upgrade
-
-      - name: Build Native
-        run: bin/build-native.sh
-
-      # We now run integration test before other build steps (to quickly see runtime failures)
-      - name: Build for native
-        run: platformio run -e native
-
-      - name: Integration test
-        run: |
-          .pio/build/native/program & sleep 10 # 5 seconds was not enough
-          echo "Simulator started, launching python test..."
-          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
-
-      - name: PlatformIO Tests
-        run: platformio test -e native --junit-output-path testreport.xml
-
-      - name: Test Report
-        uses: dorny/test-reporter@v1.9.1
-        if: success() || failure() # run this step even if previous step failed
-        with:
-          name: PlatformIO Tests
-          path: testreport.xml
-          reporter: java-junit
+  native-tests:
+    uses: ./.github/workflows/test_native.yml
 
   hardware-tests:
     runs-on: test-runner

.github/workflows/trunk_format_pr.yml

@@ -22,12 +22,16 @@ jobs:
       - name: Run Trunk Fmt
         run: trunk fmt
 
+      - name: Get release version string
+        run: echo "long=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
       - name: Commit and push changes
         run: |
           git config --global user.name "github-actions[bot]"
           git config --global user.email "github-actions[bot]@users.noreply.github.com"
           git add .
-          git commit -m "Add firmware version ${{ steps.version.outputs.version }}"
+          git commit -m "Add firmware version ${{ steps.version.outputs.long }}"
           git push
 
       - name: Comment on PR

.github/workflows/update_protobufs.yml

@@ -12,14 +12,15 @@ jobs:
           submodules: true
 
       - name: Update submodule
+        if: ${{ github.ref == 'refs/heads/master' }}
         run: |
           git submodule update --remote protobufs
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.9-linux-x86.tar.gz
-          mv nanopb-0.4.9-linux-x86 nanopb-0.4.9
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9.1-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.9.1-linux-x86.tar.gz
+          mv nanopb-0.4.9.1-linux-x86 nanopb-0.4.9
 
       - name: Re-generate protocol buffers
         run: |

.gitignore

@@ -1,4 +1,8 @@
 .pio
+pio
+pio.tar
+web
+web.tar
 
 # ignore vscode IDE settings files
 .vscode/*
@@ -30,4 +34,4 @@ release/
 .vscode/extensions.json
 /compile_commands.json
 src/mesh/raspihttp/certificate.pem
-src/mesh/raspihttp/private_key.pem
+src/mesh/raspihttp/private_key.pem

.trunk/trunk.yaml

@@ -1,36 +1,37 @@
 version: 0.1
 cli:
-  version: 1.22.7
+  version: 1.22.8
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.4
+      ref: v1.6.6
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.83.2
+    - prettier@3.4.2
+    - trufflehog@3.86.1
     - yamllint@1.35.1
-    - bandit@1.7.10
-    - checkov@3.2.277
+    - bandit@1.8.0
+    - checkov@3.2.334
     - terrascan@1.19.9
-    - trivy@0.56.2
+    - trivy@0.58.0
     #- trufflehog@3.63.2-rc0
     - taplo@0.9.3
-    - ruff@0.7.2
+    - ruff@0.8.3
     - isort@5.13.2
-    - markdownlint@0.42.0
-    - oxipng@9.1.2
+    - markdownlint@0.43.0
+    - oxipng@9.1.3
     - svgo@3.3.2
-    - actionlint@1.7.3
+    - actionlint@1.7.4
     - flake8@7.1.1
-    - hadolint@2.12.0
+    - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
     - black@24.10.0
     - git-diff-check
-    - gitleaks@8.21.1
+    - gitleaks@8.21.2
     - clang-format@16.0.3
-    - prettier@3.3.3
+    #- prettier@3.3.3
   ignore:
     - linters: [ALL]
       paths:
@@ -39,7 +40,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@18.12.1
+    - node@18.20.5
 actions:
   disabled:
     - trunk-announce

CODE_OF_CONDUCT.md

@@ -1,4 +1,4 @@
 # Contributor Covenant Code of Conduct
 
-The Meshtastic Firmware project is subject to the code of conduct for the parent project, which can be found here: 
+The Meshtastic Firmware project is subject to the code of conduct for the parent project, which can be found here:
 https://meshtastic.org/docs/legal/conduct/

Dockerfile

@@ -1,32 +1,29 @@
-FROM debian:bookworm-slim AS builder
+# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore-all(hadolint/DL3008): Use latest version of apt packages for buildchain
+# trunk-ignore-all(trivy/DS002): We must run as root for this container
+# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
+# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
 
+FROM python:3.12-bookworm AS builder
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
-# http://bugs.python.org/issue19846
-# > At the moment, setting "LANG=C" on a Linux system *fundamentally breaks Python 3*, and that's not OK.
-ENV LANG C.UTF-8
-
-# Install build deps
-USER root
-
-# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
-RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
-                           ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
-                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
-    apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
-
-RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
-USER mesh
+# Install Dependencies
+ENV PIP_ROOT_USER_ACTION=ignore
+RUN apt-get update && apt-get install --no-install-recommends -y wget g++ zip git ca-certificates \
+        libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \
+        libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && \
+    pip install --no-cache-dir -U platformio==6.1.16 && \
+    mkdir /tmp/firmware
 
+# Copy source code
 WORKDIR /tmp/firmware
-RUN python3 -m venv /tmp/firmware 
-RUN bash -o pipefail -c "source bin/activate; pip3 install --no-cache-dir -U platformio==6.1.15"
-# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
-COPY --chown=mesh:mesh . /tmp/firmware
-RUN bash -o pipefail -c "source ./bin/activate && bash ./bin/build-native.sh"
-RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+COPY . /tmp/firmware
+
+# Build
+RUN bash ./bin/build-native.sh && \
+    cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 
 ##### PRODUCTION BUILD #############
@@ -35,20 +32,25 @@ FROM debian:bookworm-slim
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
 
-# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
-# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
-RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
-    apt-get clean && rm -rf /var/lib/apt/lists/*
+# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
+USER root
 
-RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-USER mesh
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* \
+    && mkdir -p /var/lib/meshtasticd \
+    && mkdir -p /etc/meshtasticd/config.d
 
-WORKDIR /home/mesh
-COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/
+# Fetch compiled binary from the builder
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+# Copy config templates
+COPY ./bin/config.d /etc/meshtasticd/available.d
 
-RUN mkdir data
-VOLUME /home/mesh/data
+WORKDIR /var/lib/meshtasticd
+VOLUME /var/lib/meshtasticd
 
-CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]
+# Expose Meshtastic TCP API port from the host
+EXPOSE 4403
 
-HEALTHCHECK NONE
+CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ]
+
+HEALTHCHECK NONE

alpine.Dockerfile

@@ -0,0 +1,42 @@
+# trunk-ignore-all(trivy/DS002): We must run as root for this container
+# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container
+# trunk-ignore-all(hadolint/DL3002): We must run as root for this container
+
+FROM python:3.12-alpine3.21 AS builder
+
+ENV PIP_ROOT_USER_ACTION=ignore
+RUN apk add bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \
+        libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone && \
+    pip install --no-cache-dir -U platformio==6.1.16 && \
+    mkdir /tmp/firmware
+
+WORKDIR /tmp/firmware
+COPY . /tmp/firmware
+
+# Create small package (no debugging symbols)
+# Add `argp` for musl
+ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp"
+
+RUN bash ./bin/build-native.sh && \
+    cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+
+# ##### PRODUCTION BUILD #############
+
+FROM alpine:3.21
+
+# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root
+USER root
+
+RUN apk add libstdc++ libgpiod yaml-cpp libusb i2c-tools \
+    && mkdir -p /var/lib/meshtasticd \
+    && mkdir -p /etc/meshtasticd/config.d
+COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/
+
+WORKDIR /var/lib/meshtasticd
+VOLUME /var/lib/meshtasticd
+
+EXPOSE 4403
+
+CMD [ "sh",  "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ]
+
+HEALTHCHECK NONE

arch/esp32/esp32.ini

@@ -43,9 +43,10 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${radiolib_base.lib_deps}
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.2
-  https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
+  https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1
   lewisxhe/XPowersLib@^0.2.6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
   rweather/Crypto@^0.4.0

arch/esp32/esp32c6.ini

@@ -23,6 +23,7 @@ lib_deps =
   ${arduino_base.lib_deps}
   ${networking_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${radiolib_base.lib_deps}
   lewisxhe/XPowersLib@^0.2.6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
   rweather/Crypto@^0.4.0

arch/nrf52/nrf52.ini

@@ -1,10 +1,11 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.5.0
+platform = platformio/nordicnrf52@^10.7.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   framework-arduinoadafruitnrf52 @ https://github.com/geeksville/Adafruit_nRF52_Arduino.git
+  toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
 build_flags =
@@ -14,14 +15,18 @@ build_flags =
   -Wno-unused-variable
   -Isrc/platform/nrf52
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -DMAX_NUM_NODES=80
 
 build_src_filter = 
   ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}
+  ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
 
 lib_ignore =
   BluetoothOTA
-  lvgl
+  lvgl

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
-; The Portduino based sim environment on top of any host OS, all hardware will be simulated
+; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#bcd02436cfca91f7d28ad0f7dab977c6aaa781af
+platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9
 framework = arduino
 
 build_src_filter = 
@@ -23,8 +23,10 @@ build_src_filter =
 lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
+  ${radiolib_base.lib_deps}
   rweather/Crypto@^0.4.0
-  https://github.com/lovyan03/LovyanGFX.git#1401c28a47646fe00538d487adcb2eb3c72de805
+  lovyan03/LovyanGFX@^1.2.0
+  https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef
 
 build_flags =
   ${arduino_base.build_flags}
@@ -32,6 +34,10 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
+  -lpthread
+  -lstdc++fs
   -lbluetooth
   -lgpiod
   -lyaml-cpp
+  -li2c
+  -std=c++17

arch/rp2xx0/rp2040.ini

@@ -1,8 +1,8 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#v1.2.0-gcc12
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.0.3
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -22,4 +22,5 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
+  ${radiolib_base.lib_deps}
   rweather/Crypto

arch/rp2xx0/rp2350.ini

@@ -1,18 +1,18 @@
 ; Common settings for rp2040 Processor based targets
 [rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9e55f6db5c56b9867c69fe473f388beea4546672
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#a6ab6e1f95bc1428d667d55ea7173c0744acc03c ; 4.0.2+
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable 
+  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
   -Isrc/platform/rp2xx0
-  -D__PLAT_RP2040__
+  -D__PLAT_RP2350__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>
 
 lib_ignore =
   BluetoothOTA
@@ -21,4 +21,5 @@ lib_ignore =
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  rweather/Crypto
+  ${radiolib_base.lib_deps}
+  rweather/Crypto

arch/stm32/stm32.ini

@@ -30,8 +30,9 @@ upload_protocol = stlink
 lib_deps =
   ${env.lib_deps}
   charlesbaynham/OSFS@^1.2.3
+  jgromes/RadioLib@7.0.2
   https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
-  mathertel/OneButton@~2.6.1
+  mathertel/OneButton@2.6.1
   Wire

bin/.gitignore

@@ -0,0 +1 @@
+config.yaml

bin/base64_to_hex.py

@@ -0,0 +1,33 @@
+import sys
+import base64
+
+def base64_to_hex_string(b64_string):
+    try:
+        # Decode the Base64 string to raw bytes
+        decoded_bytes = base64.b64decode(b64_string)
+    except Exception as e:
+        raise ValueError(f"Invalid Base64 input: {e}")
+    
+    # Check if the decoded result is exactly 32 bytes
+    if len(decoded_bytes) != 32:
+        raise ValueError("Decoded Base64 input must be exactly 32 bytes.")
+    
+    # Convert each byte to its hex representation
+    hex_values = [f"0x{byte:02x}" for byte in decoded_bytes]
+    
+    # Join the formatted hex values with commas
+    formatted_output = "{ " + ", ".join(hex_values) + " };"
+    return formatted_output
+
+if __name__ == "__main__":
+    # Check if a Base64 string was provided in command line arguments
+    if len(sys.argv) != 2:
+        print("Usage: python script.py <base64-string>")
+        sys.exit(1)
+    
+    b64_string = sys.argv[1]
+    try:
+        formatted_hex = base64_to_hex_string(b64_string)
+        print(formatted_hex)
+    except ValueError as e:
+        print(e)

bin/build-esp32.sh

@@ -35,6 +35,11 @@ cp $SRCBIN $OUTDIR/$basename-update.bin
 
 echo "Building Filesystem for ESP32 targets"
 pio run --environment $1 -t buildfs
+cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$VERSION.bin
+# Remove webserver files from the filesystem and rebuild
+ls -l data/static # Diagnostic list of files
+rm -rf data/static
+pio run --environment $1 -t buildfs
 cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/build-native.sh

@@ -27,5 +27,4 @@ rm -r $OUTDIR/* || true
 platformio pkg update --environment native || platformioFailed
 pio run --environment native || platformioFailed
 cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
-cp bin/device-install.* $OUTDIR
-cp bin/device-update.* $OUTDIR
+cp bin/native-install.* $OUTDIR

bin/build-userprefs-json.py

@@ -24,7 +24,7 @@ def write_macros_to_json(macros, output_file):
 
 def main():
     header_file = 'userPrefs.h'
-    output_file = 'userPrefs.json'
+    output_file = 'userPrefs.jsonc'
     # Uncomment all macros in the header file
     with open(header_file, 'r') as file:
         lines = file.readlines()

bin/config-dist.yaml

@@ -12,19 +12,6 @@ Lora:
 #  IRQ: 17
 #  Reset: 22
 
-#  Module: sx1262  # pinedio
-#  CS: 0
-#  IRQ: 10
-#  Busy: 11
-#  DIO2_AS_RF_SWITCH: true
-#  spidev: spidev0.1
-
-#  Module: RF95  # Adafruit RFM9x
-#  Reset: 25
-#  CS: 7
-#  IRQ: 22
-#  Busy: 23
-
 #  Module: RF95  # Elecrow Lora RFM95 IOT https://www.elecrow.com/lora-rfm95-iot-board-for-rpi.html
 #  Reset: 22
 #  CS: 7
@@ -36,6 +23,47 @@ Lora:
 #  Busy: 20
 #  Reset: 18
 
+### The Radxa Zero 3E/W employs multiple gpio chips.
+### Each gpio pin must be unique, but can be assigned to a specific gpio chip and line.
+### In case solely a no. is given, the default gpio chip and pin == line will be employed.
+###
+#  Module: sx1262  # Radxa Zero 3E/W + Ebyte E22-900M30S
+#  DIO2_AS_RF_SWITCH: true
+#  DIO3_TCXO_VOLTAGE: 1.8
+#  CS:             # NSS     PIN_24 -> chip 4, line 22
+#    pin: 24
+#    gpiochip: 4
+#    line: 22
+#  SCK:            # SCK     PIN_23 -> chip 4, line 18
+#    pin: 23
+#    gpiochip: 4
+#    line: 18
+#  Busy:           # BUSY    PIN_29 -> chip 3!, line 11
+#    pin: 29
+#    gpiochip: 3
+#    line: 11
+#  MOSI:           # MOSI    PIN_19 -> chip 4, line 19
+#    pin: 19
+#    gpiochip: 4
+#    line: 19
+#  MISO:           # MISO    PIN_21 -> chip 4, line 21
+#    pin: 21
+#    gpiochip: 4
+#    line: 21
+#  Reset:          # NRST    PIN_27 -> chip 4, line 10
+#    pin: 27
+#    gpiochip: 4
+#    line: 10
+#  IRQ:            # DIO1    PIN_28 -> chip 4, line 11
+#    pin: 28
+#    gpiochip: 4
+#    line: 11
+#  RXen:           # RXEN    PIN_22 -> chip 3!, line 17
+#    pin: 22
+#    gpiochip: 3
+#    line: 17
+#  TXen: RADIOLIB_NC # TXEN   no PIN, no line, fallback to default gpio chip
+
 #  Module: sx1268  # SX1268-based modules, tested with Ebyte E22 400M33S
 #  CS: 21
 #  IRQ: 16
@@ -50,11 +78,9 @@ Lora:
 #  TXen: x  # TX and RX enable pins
 #  RXen: x
 
-#  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
-
 #  spiSpeed: 2000000
 
-### Set gpio chip to use in /dev/. Defaults to 0.
+### Set default/fallback gpio chip to use in /dev/. Defaults to 0.
 ### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
 #  gpiochip: 4
 
@@ -155,9 +181,11 @@ Logging:
 
 Webserver:
 #  Port: 443 # Port for Webserver & Webservices
-#  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
+#  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
 
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
-  ConfigDirectory: /etc/meshtasticd/config.d/
+  ConfigDirectory: /etc/meshtasticd/config.d/
+#  MACAddress: AA:BB:CC:DD:EE:FF
+#  MACAddressSource: eth0

bin/config.d/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml

@@ -0,0 +1,9 @@
+##  https://www.mikroe.com/lr-iot-click
+Lora:
+  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
+#  CS: 25
+  IRQ: 10
+  Busy: 12
+#  Reset: 2
+  spidev: spidev2.0
+  DIO3_TCXO_VOLTAGE: 1.6

bin/config.d/OpenWRT_One_mikroBUS_sx1262.yaml

@@ -0,0 +1,8 @@
+Lora:
+  Module: sx1262
+  IRQ: 10
+  Busy: 12
+#  Reset: 2
+  spidev: spidev2.0
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true

bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml

@@ -0,0 +1,20 @@
+---
+Lora:
+## Ebyte E80-900M22S
+## This is a bit experimental
+## 
+##
+  Module: lr1121
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO3_TCXO_VOLTAGE: 1.8
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+
+
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml

@@ -0,0 +1,21 @@
+---
+Lora:
+## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup
+## HT-RA62 (Has internal switching, but whatever)
+## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN)
+## Will work with any module with or without RF switching, and with TCXO
+  Module: sx1262
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+  
+General:
+  MACAddressSource: eth0

bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml

@@ -0,0 +1,21 @@
+---
+Lora:
+## Ebyte E22-900MM22S with no external RF switching setup
+## Waveshare SX126X XXXM, AI Thinker RA-01SH
+## Will work with any module with or without RF switching and no TCXO
+
+  Module: sx1262  
+  gpiochip: 1 # subtract 32 from the gpio numbers
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: false
+  CS: 16 #pin6 / GPIO48 1C0
+  IRQ: 23  #pin17 / GPIO55 1C7
+  Busy: 22 #pin16 / GPIO54 1C6
+  Reset: 25 #pin13 / GPIO57 1D1 
+  RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things?
+#  TXen: bridge to DIO2 on E22 module
+  spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19)
+  spiSpeed: 2000000
+
+General:
+  MACAddressSource: eth0

bin/config.d/lora-Adafruit-RFM9x

@@ -0,0 +1,5 @@
+#  Module: RF95  # Adafruit RFM9x
+#  Reset: 25
+#  CS: 7
+#  IRQ: 22
+#  Busy: 23

bin/config.d/lora-meshstick-1262.yaml

@@ -0,0 +1,11 @@
+Lora:
+  Module: sx1262
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  spidev: ch341
+  DIO3_TCXO_VOLTAGE: true
+#  USB_Serialnum: 12345678
+  USB_PID: 0x5512
+  USB_VID: 0x1A86

bin/config.d/lora-pinedio-usb-sx1262.yaml

@@ -0,0 +1,5 @@
+Lora:
+  Module: sx1262
+  CS: 0 
+  IRQ: 10
+  spidev: ch341

bin/device-install.bat

@@ -1,16 +1,26 @@
 @ECHO OFF
 
 set PYTHON=python
+set WEB_APP=0
+
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
 
 goto GETOPTS
 :HELP
-echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
+echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web]
 echo Flash image file to device, but first erasing and writing system information
 echo.
 echo     -h               Display this help and exit
 echo     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
 echo     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%)
 echo     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+echo     --web            Flash WEB APP.
 goto EOF
 
 :GETOPTS
@@ -19,37 +29,44 @@ if /I "%1"=="--help" goto HELP
 if /I "%1"=="-F" set "FILENAME=%2" & SHIFT
 if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT
 if /I "%1"=="-P" set PYTHON=%2 & SHIFT
+if /I "%1"=="--web" set WEB_APP=1 & SHIFT
 SHIFT
 IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-	goto HELP
+    goto HELP
 )
 IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%, but first erasing and writing system information"
-	%PYTHON% -m esptool --baud 115200 erase_flash
-	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
+    %ESPTOOL_CMD% --baud 115200 erase_flash
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME%
     
     @REM Account for S3 and C3 board's different OTA partition
     IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
         IF x%FILENAME:esp32c3=%==x%FILENAME% (
-            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin
         ) else (
-            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin
         )
-	) else (
-        %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
+    ) else (
+        %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin
     )
-    for %%f in (littlefs-*.bin) do (
-        %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f
+    IF %WEB_APP%==1 (
+        for %%f in (littlefswebui-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
+    ) else (
+        for %%f in (littlefs-*.bin) do (
+            %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f
+        )
     )
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 )
 
 :EOF

bin/device-install.sh

@@ -1,22 +1,45 @@
 #!/bin/sh
 
 PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
+WEB_APP=false
+
+# Determine the correct esptool command to use
+if "$PYTHON" -m esptool version >/dev/null 2>&1; then
+    ESPTOOL_CMD="$PYTHON -m esptool"
+elif command -v esptool >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool"
+elif command -v esptool.py >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool.py"
+else
+    echo "Error: esptool not found"
+    exit 1
+fi
 
 set -e
 
 # Usage info
 show_help() {
 	cat <<EOF
-Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
+Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] [--web]
 Flash image file to device, but first erasing and writing system information"
 
     -h               Display this help and exit
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+    --web            Flash WEB APP.
 
 EOF
 }
+# Preprocess long options like --web
+for arg in "$@"; do
+    case "$arg" in
+        --web)
+            WEB_APP=true
+            shift # Remove this argument from the list
+            ;;
+    esac
+done
 
 while getopts ":hp:P:f:" opt; do
 	case "${opt}" in
@@ -49,19 +72,23 @@ shift "$((OPTIND - 1))"
 
 if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
-	"$PYTHON" -m esptool erase_flash
-	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
+	$ESPTOOL_CMD erase_flash
+	$ESPTOOL_CMD write_flash 0x00 "${FILENAME}"
 	# Account for S3 board's different OTA partition
 	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
 		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
-			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
+			$ESPTOOL_CMD write_flash 0x260000 bleota.bin
 		else
-			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
+			$ESPTOOL_CMD write_flash 0x260000 bleota-c3.bin
 		fi
 	else
-		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
+		$ESPTOOL_CMD write_flash 0x260000 bleota-s3.bin
+	fi
+	if [ "$WEB_APP" = true ]; then
+		$ESPTOOL_CMD write_flash 0x300000 littlefswebui-*.bin
+	else
+		$ESPTOOL_CMD write_flash 0x300000 littlefs-*.bin
 	fi
-	"$PYTHON" -m esptool write_flash 0x300000 littlefs-*.bin
 
 else
 	show_help

bin/device-update.bat

@@ -2,6 +2,14 @@
 
 set PYTHON=python
 
+:: Determine the correct esptool command to use
+where esptool >nul 2>&1
+if %ERRORLEVEL% EQU 0 (
+    set "ESPTOOL_CMD=esptool"
+) else (
+    set "ESPTOOL_CMD=%PYTHON% -m esptool"
+)
+
 goto GETOPTS
 :HELP
 echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME]
@@ -24,17 +32,17 @@ IF NOT "__%1__"=="____" goto GETOPTS
 
 IF "__%FILENAME%__" == "____" (
     echo "Missing FILENAME"
-	goto HELP
+    goto HELP
 )
 IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% (
     echo Trying to flash update %FILENAME%
-    %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME%
+    %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME%
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 ) else (
     echo "Invalid file: %FILENAME%"
-	goto HELP
+    goto HELP
 )
 
 :EOF

bin/device-update.sh

@@ -2,6 +2,18 @@
 
 PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
 
+# Determine the correct esptool command to use
+if "$PYTHON" -m esptool version >/dev/null 2>&1; then
+    ESPTOOL_CMD="$PYTHON -m esptool"
+elif command -v esptool >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool"
+elif command -v esptool.py >/dev/null 2>&1; then
+    ESPTOOL_CMD="esptool.py"
+else
+    echo "Error: esptool not found"
+    exit 1
+fi
+
 # Usage info
 show_help() {
 cat << EOF
@@ -9,7 +21,7 @@ Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, leave existing system intact."
 
     -h               Display this help and exit
-    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerrous).
+    -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
     -f FILENAME      The *update.bin file to flash.  Custom to your device type.
     
@@ -30,7 +42,7 @@ while getopts ":hp:P:f:" opt; do
         f)  FILENAME=${OPTARG}
             ;;
         *)
- 	    echo "Invalid flag."
+ 	        echo "Invalid flag."
             show_help >&2
             exit 1
             ;;
@@ -45,7 +57,7 @@ shift "$((OPTIND-1))"
 
 if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then
 	printf "Trying to flash update ${FILENAME}"
-	$PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME}
+	$ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME}
 else
 	show_help
 	echo "Invalid file: ${FILENAME}"

bin/platformio-custom.py

@@ -3,6 +3,8 @@
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
+import json
+import re
 
 from readprops import readProps
 
@@ -90,11 +92,37 @@ prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
 print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV"))
 
+jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc"
+with open(jsonLoc) as f:
+    jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE)
+    userPrefs = json.loads(jsonStr)
+
+pref_flags = []
+# Pre-process the userPrefs
+for pref in userPrefs:
+    if userPrefs[pref].startswith("{"):
+        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
+    elif userPrefs[pref].replace(".", "").isdigit():
+        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
+    elif userPrefs[pref] == "true" or userPrefs[pref] == "false":
+        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
+    elif userPrefs[pref].startswith("meshtastic_"):
+        pref_flags.append("-D" + pref + "=" + userPrefs[pref])
+    # If the value is a string, we need to wrap it in quotes
+    else:
+        pref_flags.append("-D" + pref + "=" + env.StringifyMacro(userPrefs[pref]) + "")
+
 # General options that are passed to the C and C++ compilers
-projenv.Append(
-    CCFLAGS=[
+flags = [
         "-DAPP_VERSION=" + verObj["long"],
         "-DAPP_VERSION_SHORT=" + verObj["short"],
         "-DAPP_ENV=" + env.get("PIOENV"),
-    ]
-)
+    ] + pref_flags
+
+print ("Using flags:")
+for flag in flags:
+    print(flag)
+    
+projenv.Append(
+    CCFLAGS=flags,
+)

bin/readprops.py

@@ -1,6 +1,8 @@
 import configparser
 import subprocess
-
+import os
+run_number = os.getenv('GITHUB_RUN_NUMBER', '0')
+build_location = os.getenv('BUILD_LOCATION', 'local')
 
 def readProps(prefsLoc):
     """Read the version of our project as a string"""
@@ -11,6 +13,7 @@ def readProps(prefsLoc):
     verObj = dict(
         short="{}.{}.{}".format(version["major"], version["minor"], version["build"]),
         long="unset",
+        deb="unset",
     )
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
@@ -27,16 +30,16 @@ def readProps(prefsLoc):
         # if isDirty:
         #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
         #     suffix = sha + "-d"
-        verObj["long"] = "{}.{}.{}.{}".format(
-            version["major"], version["minor"], version["build"], suffix
-        )
+        verObj["long"] = "{}.{}".format(verObj["short"], suffix)
+        verObj["deb"] = "{}.{}~{}{}".format(verObj["short"], run_number, build_location, sha)
     except:
         # print("Unexpected error:", sys.exc_info()[0])
         # traceback.print_exc()
         verObj["long"] = verObj["short"]
+        verObj["deb"] = "{}.{}~{}".format(verObj["short"], run_number, build_location)
 
     # print("firmware version " + verStr)
     return verObj
 
 
-# print("path is" + ','.join(sys.path))
+# print("path is" + ','.join(sys.path))

bin/rpkg.macros

@@ -0,0 +1,12 @@
+function meshtastic_version {
+    meshtastic_version=$(python3 bin/buildinfo.py short)
+    echo -n "$meshtastic_version"
+}
+function git_commits_num {
+    total_commits=$(git rev-list --all --count)
+    echo -n "$total_commits"
+}
+function git_commit_sha {
+    commit_sha=$(git rev-parse --short HEAD)
+    echo -n "$commit_sha"
+}

boards/esp32-s3-zero.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "partitions": "default.csv",
+      "memory_type": "qio_qspi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "psram_type": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "platforms": ["espressif32"],
+  "name": "Espressif ESP32-S3-FH4R2 (4 MB QD, 2MB PSRAM)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
+  "vendor": "Espressif"
+}

boards/mesh-tab.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv",
+      "memory_type": "qio_qspi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x80D6"]],
+    "mcu": "esp32s3",
+    "variant": "mesh-tab"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3 WROOM-1 N16R2 (16 MB FLASH, 2 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://github.com/valzzu/Mesh-Tab",
+  "vendor": "Espressif"
+}

boards/seeed-sensecap-indicator.json

@@ -15,10 +15,12 @@
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
+    "f_boot": "120000000L",
+    "boot": "qio",
     "flash_mode": "qio",
     "hwids": [["0x1A86", "0x7523"]],
     "mcu": "esp32s3",
-    "variant": "esp32s3r8"
+    "variant": "esp32s3"
   },
   "connectivity": ["wifi", "bluetooth", "lora"],
   "debug": {
@@ -32,9 +34,9 @@
     "flash_size": "8MB",
     "maximum_ram_size": 327680,
     "maximum_size": 8388608,
-    "require_upload_port": true,
+    "require_upload_port": false,
     "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
+    "wait_for_upload_port": false,
     "speed": 921600
   },
   "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",

boards/t-deck.json

@@ -10,7 +10,7 @@
       "-DARDUINO_USB_CDC_ON_BOOT=1",
       "-DARDUINO_USB_MODE=0",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",

boards/t-echo.json

@@ -48,6 +48,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
-  "vendor": "TTGO"
+  "url": "https://lilygo.cc/products/t-echo-lilygo",
+  "vendor": "LILYGO"
 }

debian/.gitignore

@@ -0,0 +1,6 @@
+.debhelper
+debhelper-build-stamp
+meshtasticd
+files
+meshtasticd.substvars
+meshtasticd.postrm.debhelper

debian/changelog

@@ -0,0 +1,6 @@
+meshtasticd (2.5.20.0) UNRELEASED; urgency=medium
+
+  * Initial packaging
+  * GitHub Actions Automatic version bump
+
+ -- Austin Lane <github-actions[bot]@users.noreply.github.com>  Mon, 13 Jan 2025 19:24:14 +0000

debian/ci_changelog.sh

@@ -0,0 +1,7 @@
+#!/usr/bin/bash
+export DEBEMAIL="github-actions[bot]@users.noreply.github.com"
+PKG_VERSION=$(python3 bin/buildinfo.py short)
+
+dch --newversion "$PKG_VERSION.0" \
+	--distribution UNRELEASED \
+	"GitHub Actions Automatic version bump"

debian/ci_pack_sdeb.sh

@@ -0,0 +1,23 @@
+#!/usr/bin/bash
+export DEBEMAIL="jbennett@incomsystems.biz"
+export PLATFORMIO_LIBDEPS_DIR=pio/libdeps
+export PLATFORMIO_PACKAGES_DIR=pio/packages
+export PLATFORMIO_CORE_DIR=pio/core
+
+# Download libraries to `pio`
+platformio pkg install -e native
+platformio pkg install -e native -t platformio/tool-scons@4.40502.0
+# Compress `pio` directory to prevent dh_clean from sanitizing it
+tar -cf pio.tar pio/
+rm -rf pio
+# Download the latest meshtastic/web release build.tar to `web.tar`
+curl -L https://github.com/meshtastic/web/releases/download/latest/build.tar -o web.tar
+
+package=$(dpkg-parsechangelog --show-field Source)
+
+rm -rf debian/changelog
+dch --create --distribution "$SERIES" --package "$package" --newversion "$PKG_VERSION~$SERIES" \
+	"GitHub Actions Automatic packaging for $PKG_VERSION~$SERIES"
+
+# Build the source deb
+debuild -S -nc -k"$GPG_KEY_ID"

debian/control

@@ -0,0 +1,32 @@
+Source: meshtasticd
+Section: misc
+Priority: optional
+Maintainer: Austin Lane <vidplace7@gmail.com>
+Build-Depends: debhelper-compat (= 13),
+               tar,
+               gzip,
+               platformio,
+               python3-protobuf,
+               python3-grpcio,
+               git,
+               g++,
+               pkg-config,
+               libyaml-cpp-dev,
+               libgpiod-dev,
+               libbluetooth-dev,
+               libusb-1.0-0-dev,
+               libi2c-dev,
+               openssl,
+               libssl-dev,
+               libulfius-dev,
+               liborcania-dev
+Standards-Version: 4.6.2
+Homepage: https://github.com/meshtastic/firmware
+Rules-Requires-Root: no
+
+Package: meshtasticd
+Architecture: any
+Depends: ${misc:Depends}, ${shlibs:Depends}
+Description: Meshtastic daemon for communicating with Meshtastic devices
+ Meshtastic is an off-grid text communication platform that uses inexpensive 
+ LoRa radios.

debian/meshtasticd.dirs

@@ -0,0 +1,4 @@
+etc/meshtasticd
+etc/meshtasticd/config.d
+etc/meshtasticd/available.d
+usr/share/meshtasticd/web

debian/meshtasticd.install

@@ -0,0 +1,8 @@
+.pio/build/native/meshtasticd  usr/sbin
+
+bin/config.yaml                etc/meshtasticd
+bin/config.d/*                 etc/meshtasticd/available.d
+
+bin/meshtasticd.service        lib/systemd/system
+
+web/*                          usr/share/meshtasticd/web

debian/rules

@@ -0,0 +1,23 @@
+#!/usr/bin/make -f
+# export DH_VERBOSE = 1
+
+# Use the "dh" sequencer
+%:
+	dh $@
+
+# https://docs.platformio.org/en/latest/envvars.html
+PIO_ENV:=\
+	PLATFORMIO_CORE_DIR=pio/core \
+	PLATFORMIO_LIBDEPS_DIR=pio/libdeps \
+	PLATFORMIO_PACKAGES_DIR=pio/packages
+
+override_dh_auto_build:
+	# Extract tarballs within source deb
+	tar -xf pio.tar
+	mkdir -p web && tar -xf web.tar -C web
+	gunzip web/ -r
+	# Build with platformio
+	$(PIO_ENV) platformio run -e native
+	# Move the binary and default config to the correct name
+	mv .pio/build/native/program .pio/build/native/meshtasticd
+	cp bin/config-dist.yaml bin/config.yaml

debian/source/format

@@ -0,0 +1 @@
+3.0 (native)

debian/source/include-binaries

@@ -0,0 +1,2 @@
+pio.tar
+web.tar

debian/source/options

@@ -0,0 +1 @@
+extend-diff-ignore = "\.pio"

docker-compose.yml

@@ -1,13 +1,26 @@
-version: "3.7"
+# USB-Based Meshtastic container-node!
+
+# Copy .env.example to .env and set the USB_DEVICE and CONFIG_PATH variables
 
 services:
   meshtastic-node:
     build: .
-    deploy:
-      mode: replicated
-      replicas: 4
-    networks:
-      - mesh
+    container_name: meshtasticd
 
-networks:
-  mesh:
+    # Pass USB device through to the container
+    devices:
+      - "${USB_DEVICE}"
+
+    # Mount local config file and named volume for data persistence
+    volumes:
+      - "${CONFIG_PATH}:/etc/meshtasticd/config.yaml:ro"
+      - meshtastic_data:/var/lib/meshtasticd
+
+    # Forward the container’s port 4403 to the host
+    ports:
+      - 4403:4403
+
+    restart: unless-stopped
+
+volumes:
+  meshtastic_data:

meshtasticd.spec.rpkg

@@ -0,0 +1,91 @@
+# meshtasticd spec file for RPM-based distributions
+#
+# Build locally with:
+# ```
+# sudo dnf install rpkg-util
+# rpkg local
+# ```
+#
+# See:
+# - https://docs.pagure.org/rpkg-util/v3/index.html
+# - https://docs.fedoraproject.org/en-US/packaging-guidelines/Versioning/
+
+Name:           meshtasticd
+# Version Ex:   2.5.19
+Version:        {{{ meshtastic_version }}}
+# Release Ex:   9127.daily.gitd7f5f620.fc41
+Release:        {{{ git_commits_num }}}%{?copr_projectname:.%{copr_projectname}}.git{{{ git_commit_sha }}}%{?dist}
+VCS:            {{{ git_dir_vcs }}}
+Summary:        Meshtastic daemon for communicating with Meshtastic devices
+
+License:        GPL-3.0
+URL:            https://github.com/meshtastic/firmware
+Source0:        {{{ git_dir_pack }}}
+Source1:        https://github.com/meshtastic/web/releases/download/latest/build.tar
+
+BuildRequires: systemd-rpm-macros
+BuildRequires: python3-devel
+BuildRequires: platformio
+BuildRequires: python3dist(protobuf)
+BuildRequires: python3dist(grpcio[protobuf])
+BuildRequires: python3dist(grpcio-tools)
+BuildRequires: git-core
+BuildRequires: gcc-c++
+BuildRequires: pkgconfig(yaml-cpp)
+BuildRequires: pkgconfig(libgpiod)
+BuildRequires: pkgconfig(bluez)
+BuildRequires: pkgconfig(libusb-1.0)
+BuildRequires: libi2c-devel
+# Web components:
+BuildRequires: pkgconfig(openssl)
+BuildRequires: pkgconfig(liborcania)
+BuildRequires: pkgconfig(libyder)
+BuildRequires: pkgconfig(libulfius)
+
+%description
+Meshtastic daemon for controlling Meshtastic devices. Meshtastic is an off-grid
+text communication platform that uses inexpensive LoRa radios.
+
+%prep
+{{{ git_dir_setup_macro }}}
+# Unpack the web files
+mkdir -p web
+tar -xf %{SOURCE1} -C web
+gzip -dr web
+
+%build
+# Use the “native” environment from platformio to build a Linux binary
+platformio run -e native
+
+%install
+mkdir -p %{buildroot}%{_sbindir}
+install -m 0755 .pio/build/native/program %{buildroot}%{_sbindir}/meshtasticd
+
+mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd
+install -m 0644 bin/config-dist.yaml %{buildroot}%{_sysconfdir}/meshtasticd/config.yaml
+mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/config.d
+mkdir -p %{buildroot}%{_sysconfdir}/meshtasticd/available.d
+cp -r bin/config.d/* %{buildroot}%{_sysconfdir}/meshtasticd/available.d
+
+install -D -m 0644 bin/meshtasticd.service %{buildroot}%{_unitdir}/meshtasticd.service
+
+# Install the web files under /usr/share/meshtasticd/web
+mkdir -p %{buildroot}%{_datadir}/meshtasticd/web
+cp -r web/* %{buildroot}%{_datadir}/meshtasticd/web
+
+%files
+%license LICENSE
+%doc README.md
+%{_sbindir}/meshtasticd
+%dir %{_sysconfdir}/meshtasticd
+%dir %{_sysconfdir}/meshtasticd/config.d
+%dir %{_sysconfdir}/meshtasticd/available.d
+%config(noreplace) %{_sysconfdir}/meshtasticd/config.yaml
+%config %{_sysconfdir}/meshtasticd/available.d/*
+%{_unitdir}/meshtasticd.service
+%dir %{_datadir}/meshtasticd
+%dir %{_datadir}/meshtasticd/web
+%{_datadir}/meshtasticd/web/*
+
+%changelog
+%autochangelog

platformio.ini

@@ -3,164 +3,130 @@
 
 [platformio]
 default_envs = tbeam
-;default_envs = pico
-;default_envs = tbeam-s3-core
-;default_envs = tbeam0.7
-;default_envs = heltec-v1
-;default_envs = heltec-v2_0
-;default_envs = heltec-v2_1
-;default_envs = heltec-wireless-tracker
-;default_envs = chatter2
-;default_envs = tlora-v1
-;default_envs = tlora_v1_3
-;default_envs = tlora-v2
-;default_envs = tlora-v2-1-1_6
-;default_envs = tlora-v2-1-1_6-tcxo
-;default_envs = tlora-t3s3-v1
-;default_envs = t-echo
-;default_envs = canaryone
-;default_envs = native
-;default_envs = nano-g1
-;default_envs = pca10059_diy_eink
-;default_envs = meshtastic-diy-v1
-;default_envs = meshtastic-diy-v1_1
-;default_envs = meshtastic-dr-dev
-;default_envs = m5stack-coreink
-;default_envs = rak4631
-;default_envs = rak4631_eth_gw
-;default_envs = rak2560
-;default_envs = rak10701
-;default_envs = wio-e5
-;default_envs = radiomaster_900_bandit_nano
-;default_envs = radiomaster_900_bandit_micro
-;default_envs = radiomaster_900_bandit
-;default_envs = heltec_capsule_sensor_v3
-;default_envs = heltec_vision_master_t190
-;default_envs = heltec_vision_master_e213
-;default_envs = heltec_vision_master_e290
-;default_envs = heltec_mesh_node_t114
 
 extra_configs =
-  arch/*/*.ini
-  variants/*/platformio.ini
+	arch/*/*.ini
+	variants/*/platformio.ini
+description = Meshtastic
 
 [env]
 test_build_src = true
 extra_scripts = bin/platformio-custom.py
-
 ; note: we add src to our include search path so that lmic_project_config can override
 ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important.  We don't use custom fields and somewhere in that pile
 ; of code is a heap corruption bug!
 ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
 ; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need.
 build_flags = -Wno-missing-field-initializers
-  -Wno-format
-  -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
-  -DUSE_THREAD_NAMES
-  -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
-  -DPB_ENABLE_MALLOC=1
-  -DRADIOLIB_EXCLUDE_CC1101=1
-  -DRADIOLIB_EXCLUDE_NRF24=1
-  -DRADIOLIB_EXCLUDE_RF69=1
-  -DRADIOLIB_EXCLUDE_SX1231=1
-  -DRADIOLIB_EXCLUDE_SX1233=1
-  -DRADIOLIB_EXCLUDE_SI443X=1
-  -DRADIOLIB_EXCLUDE_RFM2X=1
-  -DRADIOLIB_EXCLUDE_AFSK=1
-  -DRADIOLIB_EXCLUDE_BELL=1
-  -DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
-  -DRADIOLIB_EXCLUDE_MORSE=1
-  -DRADIOLIB_EXCLUDE_RTTY=1
-  -DRADIOLIB_EXCLUDE_SSTV=1
-  -DRADIOLIB_EXCLUDE_AX25=1
-  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
-  -DRADIOLIB_EXCLUDE_BELL=1
-  -DRADIOLIB_EXCLUDE_PAGER=1
-  -DRADIOLIB_EXCLUDE_FSK4=1
-  -DRADIOLIB_EXCLUDE_APRS=1
-  -DRADIOLIB_EXCLUDE_LORAWAN=1
-  -DMESHTASTIC_EXCLUDE_DROPZONE=1
-  -DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
-  #-DBUILD_EPOCH=$UNIX_TIME
-  ;-D OLED_PL
+
+	-Wno-format
+	-Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map
+	-DUSE_THREAD_NAMES
+	-DTINYGPS_OPTION_NO_CUSTOM_FIELDS
+	-DPB_ENABLE_MALLOC=1
+	-DRADIOLIB_EXCLUDE_CC1101=1
+	-DRADIOLIB_EXCLUDE_NRF24=1
+	-DRADIOLIB_EXCLUDE_RF69=1
+	-DRADIOLIB_EXCLUDE_SX1231=1
+	-DRADIOLIB_EXCLUDE_SX1233=1
+	-DRADIOLIB_EXCLUDE_SI443X=1
+	-DRADIOLIB_EXCLUDE_RFM2X=1
+	-DRADIOLIB_EXCLUDE_AFSK=1
+	-DRADIOLIB_EXCLUDE_BELL=1
+	-DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
+	-DRADIOLIB_EXCLUDE_MORSE=1
+	-DRADIOLIB_EXCLUDE_RTTY=1
+	-DRADIOLIB_EXCLUDE_SSTV=1
+	-DRADIOLIB_EXCLUDE_AX25=1
+	-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
+	-DRADIOLIB_EXCLUDE_BELL=1
+	-DRADIOLIB_EXCLUDE_PAGER=1
+	-DRADIOLIB_EXCLUDE_FSK4=1
+	-DRADIOLIB_EXCLUDE_APRS=1
+	-DRADIOLIB_EXCLUDE_LORAWAN=1
+	-DMESHTASTIC_EXCLUDE_DROPZONE=1
+	-DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
+	-DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1
+  	-DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware
+        #-DBUILD_EPOCH=$UNIX_TIME
+        #-D OLED_PL=1
 
 monitor_speed = 115200
 monitor_filters = direct
-
 lib_deps =
-  jgromes/RadioLib@~7.0.2
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306
-  mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
-  https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
-  https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
-  nanopb/Nanopb@^0.4.9
-  erriez/ErriezCRC32@^1.0.1
-  
+	https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95
+	mathertel/OneButton@2.6.1
+	https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
+	https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
+	https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
+	nanopb/Nanopb@0.4.9
+	erriez/ErriezCRC32@1.0.1
+
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
 check_skip_packages = yes
 check_flags =
-  -DAPP_VERSION=1.0.0
-  --suppressions-list=suppressions.txt
-  --inline-suppr
+	-DAPP_VERSION=1.0.0
+	--suppressions-list=suppressions.txt
+	--inline-suppr
 
 ; Common settings for conventional (non Portduino) Arduino targets
 [arduino_base]
 framework = arduino
 lib_deps =
-  ${env.lib_deps}
-  end2endzone/NonBlockingRTTTL@^1.3.0
-  https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
-
+	${env.lib_deps}
+	end2endzone/NonBlockingRTTTL@1.3.0
 build_flags = ${env.build_flags} -Os
 build_src_filter = ${env.build_src_filter} -<platform/portduino/>
 
 ; Common libs for communicating over TCP/IP networks such as MQTT
 [networking_base]
 lib_deps =
-  knolleary/PubSubClient@^2.8
-  arduino-libraries/NTPClient@^3.1.0
-  arcao/Syslog@^2.0.0
+	knolleary/PubSubClient@2.8
+	arduino-libraries/NTPClient@3.1.0
+	arcao/Syslog@2.0.0
+
+[radiolib_base]
+lib_deps =
+	jgromes/RadioLib@7.1.2
 
 ; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-  adafruit/Adafruit BusIO@^1.16.1
-  adafruit/Adafruit Unified Sensor@^1.1.11
-  adafruit/Adafruit BMP280 Library@^2.6.8
-  adafruit/Adafruit BMP085 Library@^1.2.4
-  adafruit/Adafruit BME280 Library@^2.2.2
-  adafruit/Adafruit BMP3XX Library@^2.1.5
-  adafruit/Adafruit MCP9808 Library@^2.0.0
-  adafruit/Adafruit INA260 Library@^1.5.0
-  adafruit/Adafruit INA219@^1.2.0
-  adafruit/Adafruit MAX1704X@^1.0.3
-  adafruit/Adafruit SHTC3 Library@^1.0.0
-  adafruit/Adafruit LPS2X@^2.0.4
-  adafruit/Adafruit SHT31 Library@^2.2.2
-  adafruit/Adafruit PM25 AQI Sensor@^1.1.1
-  adafruit/Adafruit MPU6050@^2.2.4
-  adafruit/Adafruit LIS3DH@^1.3.0
-  adafruit/Adafruit AHTX0@^2.0.5
-  adafruit/Adafruit LSM6DS@^4.7.2
-  adafruit/Adafruit VEML7700 Library@^2.1.6
-  adafruit/Adafruit SHT4x Library@^1.0.4
-  adafruit/Adafruit TSL2591 Library@^1.4.5
-  sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@^1.0.5
-  sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@^1.2.13
-  ClosedCube OPT3001@^1.1.2
-  emotibit/EmotiBit MLX90632@^1.0.8
-  dfrobot/DFRobot_RTU@^1.0.3
-  sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@^1.1.2
-  adafruit/Adafruit MLX90614 Library@^2.1.5
+	adafruit/Adafruit BusIO@1.16.2
+	adafruit/Adafruit Unified Sensor@1.1.14
+	adafruit/Adafruit BMP280 Library@2.6.8
+	adafruit/Adafruit BMP085 Library@1.2.4
+	adafruit/Adafruit BME280 Library@2.2.4
+	adafruit/Adafruit BMP3XX Library@2.1.5
+	adafruit/Adafruit MCP9808 Library@2.0.2
+	adafruit/Adafruit INA260 Library@1.5.2
+	adafruit/Adafruit INA219@1.2.3
+	adafruit/Adafruit MAX1704X@1.0.3
+	adafruit/Adafruit SHTC3 Library@1.0.1
+	adafruit/Adafruit LPS2X@2.0.6
+	adafruit/Adafruit SHT31 Library@2.2.2
+	adafruit/Adafruit PM25 AQI Sensor@1.1.1
+	adafruit/Adafruit MPU6050@2.2.6
+	adafruit/Adafruit LIS3DH@1.3.0
+	adafruit/Adafruit AHTX0@2.0.5
+	adafruit/Adafruit LSM6DS@4.7.3
+	adafruit/Adafruit VEML7700 Library@2.1.6
+	adafruit/Adafruit SHT4x Library@1.0.5
+	adafruit/Adafruit TSL2591 Library@1.4.5
+	sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6
+	sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.2.13
+	ClosedCube OPT3001@1.1.2
+	emotibit/EmotiBit MLX90632@1.0.8
+	adafruit/Adafruit MLX90614 Library@2.1.5
+	https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
+	boschsensortec/BME68x Sensor Library@1.1.40407
+	https://github.com/KodinLanewave/INA3221@1.0.1
+	mprograms/QMC5883LCompass@1.2.3
+	dfrobot/DFRobot_RTU@1.0.3
+	https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d
+	robtillaart/INA226@0.6.0
 
-  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
-  boschsensortec/BME68x Sensor Library@^1.1.40407
-  https://github.com/KodinLanewave/INA3221@^1.0.1
-  lewisxhe/SensorLib@0.2.0
-  mprograms/QMC5883LCompass@^1.2.0
-  
-  https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d
-  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1
+	; Health Sensor Libraries
+	sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2

release/latest/.gitignore

@@ -1 +0,0 @@
-curfirmwareversion.xml

rpkg.conf

@@ -0,0 +1,2 @@
+[rpkg]
+user_macros = "${git_props:root}/bin/rpkg.macros"

src/AudioThread.h

@@ -64,7 +64,7 @@ class AudioThread : public concurrency::OSThread
     void initOutput()
     {
         audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S);
-        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT);
+        audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_MCLK);
         audioOut->SetGain(0.2);
     };
 

src/ButtonThread.cpp

@@ -1,4 +1,5 @@
 #include "ButtonThread.h"
+
 #include "configuration.h"
 #if !MESHTASTIC_EXCLUDE_GPS
 #include "GPS.h"
@@ -26,12 +27,12 @@ using namespace concurrency;
 ButtonThread *buttonThread; // Declared extern in header
 volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
 
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
 OneButton ButtonThread::userButton; // Get reference to static member
 #endif
 ButtonThread::ButtonThread() : OSThread("Button")
 {
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
 
 #if defined(ARCH_PORTDUINO)
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
@@ -39,7 +40,12 @@ ButtonThread::ButtonThread() : OSThread("Button")
         LOG_DEBUG("Use GPIO%02d for button", settingsMap[user]);
     }
 #elif defined(BUTTON_PIN)
-    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
+#if !defined(USERPREFS_BUTTON_PIN)
+    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;           // Resolved button pin
+#endif
+#ifdef USERPREFS_BUTTON_PIN
+    int pin = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN; // Resolved button pin
+#endif
 #if defined(HELTEC_CAPSULE_SENSOR_V3)
     this->userButton = OneButton(pin, false, false);
 #elif defined(BUTTON_ACTIVE_LOW)
@@ -59,7 +65,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #endif
 #endif
 
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
     userButton.attachClick(userButtonPressed);
     userButton.setClickMs(BUTTON_CLICK_MS);
     userButton.setPressMs(BUTTON_LONGPRESS_MS);
@@ -102,7 +108,7 @@ int32_t ButtonThread::runOnce()
     // If the button is pressed we suppress CPU sleep until release
     canSleep = true; // Assume we should not keep the board awake
 
-#if defined(BUTTON_PIN)
+#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
     userButton.tick();
     canSleep &= userButton.isIdle();
 #elif defined(ARCH_PORTDUINO)
@@ -130,7 +136,12 @@ int32_t ButtonThread::runOnce()
                 return 50;
             }
 #ifdef BUTTON_PIN
+#if !defined(USERPREFS_BUTTON_PIN)
             if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+#endif
+#if defined(USERPREFS_BUTTON_PIN)
+            if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) !=
+#endif
                  moduleConfig.canned_message.inputbroker_pin_press) ||
                 !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
                 !moduleConfig.canned_message.enabled) {
@@ -244,7 +255,12 @@ void ButtonThread::attachButtonInterrupts()
 #elif defined(BUTTON_PIN)
     // Interrupt for user button, during normal use. Improves responsiveness.
     attachInterrupt(
+#if !defined(USERPREFS_BUTTON_PIN)
         config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
+#endif
+#if defined(USERPREFS_BUTTON_PIN)
+        config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN,
+#endif
         []() {
             ButtonThread::userButton.tick();
             runASAP = true;
@@ -273,8 +289,13 @@ void ButtonThread::detachButtonInterrupts()
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
         detachInterrupt(settingsMap[user]);
 #elif defined(BUTTON_PIN)
+#if !defined(USERPREFS_BUTTON_PIN)
     detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
 #endif
+#if defined(USERPREFS_BUTTON_PIN)
+    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN);
+#endif
+#endif
 
 #ifdef BUTTON_PIN_ALT
     detachInterrupt(BUTTON_PIN_ALT);
@@ -315,7 +336,7 @@ void ButtonThread::userButtonMultiPressed(void *callerThread)
 // Non-static method, runs during callback. Grabs info while still valid
 void ButtonThread::storeClickCount()
 {
-#ifdef BUTTON_PIN
+#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN)
     multipressClickCount = userButton.getNumberClicks();
 #endif
 }

src/ButtonThread.h

@@ -38,7 +38,7 @@ class ButtonThread : public concurrency::OSThread
     void storeClickCount();
 
   private:
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN)
     static OneButton userButton; // Static - accessed from an interrupt
 #endif
 #ifdef BUTTON_PIN_ALT

src/DebugConfiguration.h

@@ -45,7 +45,7 @@
 #define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
-#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE) && !defined(PIO_UNIT_TESTING)
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)

src/FSCommon.cpp

@@ -9,6 +9,7 @@
  *
  */
 #include "FSCommon.h"
+#include "SPILock.h"
 #include "configuration.h"
 
 #ifdef HAS_SDCARD
@@ -55,6 +56,15 @@ extern "C" void lfs_assert(const char *reason)
 {
     LOG_ERROR("LFS assert: %s", reason);
     lfs_assert_failed = true;
+
+#ifndef ARCH_PORTDUINO
+#ifdef FSCom
+    // CORRUPTED FILESYSTEM. This causes bootloop so
+    // might as well try formatting now.
+    LOG_ERROR("Trying FSCom.format()");
+    FSCom.format();
+#endif
+#endif
 }
 
 /**
@@ -93,6 +103,8 @@ bool copyFile(const char *from, const char *to)
     return true;
 
 #elif defined(FSCom)
+    // take SPI Lock
+    concurrency::LockGuard g(spiLock);
     unsigned char cbuffer[16];
 
     File f1 = FSCom.open(from, FILE_O_READ);
@@ -136,16 +148,23 @@ bool renameFile(const char *pathFrom, const char *pathTo)
         return false;
     }
 #elif defined(FSCom)
+
 #ifdef ARCH_ESP32
+    // take SPI Lock
+    spiLock->lock();
     // rename was fixed for ESP32 IDF LittleFS in April
-    return FSCom.rename(pathFrom, pathTo);
+    bool result = FSCom.rename(pathFrom, pathTo);
+    spiLock->unlock();
+    return result;
 #else
+    // copyFile does its own locking.
     if (copyFile(pathFrom, pathTo) && FSCom.remove(pathFrom)) {
         return true;
     } else {
         return false;
     }
 #endif
+
 #endif
 }
 
@@ -155,6 +174,7 @@ bool renameFile(const char *pathFrom, const char *pathTo)
  * @brief Get the list of files in a directory.
  *
  * This function returns a list of files in a directory. The list includes the full path of each file.
+ * We can't use SPILOCK here because of recursion. Callers of this function should use SPILOCK.
  *
  * @param dirname The name of the directory.
  * @param levels The number of levels of subdirectories to list.
@@ -203,6 +223,7 @@ std::vector<meshtastic_FileInfo> getFiles(const char *dirname, uint8_t levels)
 
 /**
  * Lists the contents of a directory.
+ * We can't use SPILOCK here because of recursion. Callers of this function should use SPILOCK.
  *
  * @param dirname The name of the directory to list.
  * @param levels The number of levels of subdirectories to list.
@@ -316,20 +337,23 @@ void listDir(const char *dirname, uint8_t levels, bool del)
 void rmDir(const char *dirname)
 {
 #ifdef FSCom
+
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
     listDir(dirname, 10, true);
 #elif defined(ARCH_NRF52)
     // nRF52 implementation of LittleFS has a recursive delete function
     FSCom.rmdir_r(dirname);
 #endif
+
 #endif
 }
 
 void fsInit()
 {
 #ifdef FSCom
+    spiLock->lock();
     if (!FSBegin()) {
-        LOG_ERROR("Filesystem mount Failed.");
+        LOG_ERROR("Filesystem mount failed");
         // assert(0); This auto-formats the partition, so no need to fail here.
     }
 #if defined(ARCH_ESP32)
@@ -338,6 +362,7 @@ void fsInit()
     LOG_DEBUG("Filesystem files:");
 #endif
     listDir("/", 10);
+    spiLock->unlock();
 #endif
 }
 
@@ -347,6 +372,7 @@ void fsInit()
 void setupSDCard()
 {
 #ifdef HAS_SDCARD
+    concurrency::LockGuard g(spiLock);
     SDHandler.begin(SPI_SCK, SPI_MISO, SPI_MOSI);
 
     if (!SD.begin(SDCARD_CS, SDHandler)) {
@@ -374,4 +400,4 @@ void setupSDCard()
     LOG_DEBUG("Total space: %lu MB", (uint32_t)(SD.totalBytes() / (1024 * 1024)));
     LOG_DEBUG("Used space: %lu MB", (uint32_t)(SD.usedBytes() / (1024 * 1024)));
 #endif
-}
+}

src/Power.cpp

@@ -72,8 +72,9 @@ static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE;
 #endif
 
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
-INA260Sensor ina260Sensor;
 INA219Sensor ina219Sensor;
+INA226Sensor ina226Sensor;
+INA260Sensor ina260Sensor;
 INA3221Sensor ina3221Sensor;
 #endif
 
@@ -251,7 +252,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
     !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
-            LOG_DEBUG("Use INA on I2C addr 0x%x for device battery voltage", config.power.device_battery_ina_address);
             return getINAVoltage();
         }
 #endif
@@ -271,7 +271,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER;
         // Do not call analogRead() often.
         const uint32_t min_read_interval = 5000;
-        if (!Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
+        if (!initial_read_done || !Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
             last_read_time_ms = millis();
 
             uint32_t raw = 0;
@@ -414,7 +414,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #ifdef EXT_CHRG_DETECT
         return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
 #else
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) &&           \
+    !defined(DISABLE_INA_CHARGING_DETECTION)
+        if (hasINA()) {
+            // get current flow from INA sensor - negative value means power flowing into the battery
+            // default assuming  BATTERY+  <--> INA_VIN+ <--> SHUNT RESISTOR <--> INA_VIN- <--> LOAD
+            LOG_DEBUG("Using INA on I2C addr 0x%x for charging detection", config.power.device_battery_ina_address);
+#if defined(INA_CHARGING_DETECTION_INVERT)
+            return getINACurrent() > 0;
+#else
+            return getINACurrent() < 0;
+#endif
+        }
         return isBatteryConnect() && isVbusIn();
+#endif
 #endif
     }
 
@@ -451,6 +464,9 @@ class AnalogBatteryLevel : public HasBatteryLevel
     {
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
             return ina219Sensor.getBusVoltageMv();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA226].first ==
+                   config.power.device_battery_ina_address) {
+            return ina226Sensor.getBusVoltageMv();
         } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
                    config.power.device_battery_ina_address) {
             return ina260Sensor.getBusVoltageMv();
@@ -461,6 +477,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
         return 0;
     }
 
+    int16_t getINACurrent()
+    {
+        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
+            return ina219Sensor.getCurrentMa();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA226].first ==
+                   config.power.device_battery_ina_address) {
+            return ina226Sensor.getCurrentMa();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA3221].first ==
+                   config.power.device_battery_ina_address) {
+            return ina3221Sensor.getCurrentMa();
+        }
+        return 0;
+    }
+
     bool hasINA()
     {
         if (!config.power.device_battery_ina_address) {
@@ -470,6 +500,10 @@ class AnalogBatteryLevel : public HasBatteryLevel
             if (!ina219Sensor.isInitialized())
                 return ina219Sensor.runOnce() > 0;
             return ina219Sensor.isRunning();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA226].first ==
+                   config.power.device_battery_ina_address) {
+            if (!ina226Sensor.isInitialized())
+                return ina226Sensor.runOnce() > 0;
         } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first ==
                    config.power.device_battery_ina_address) {
             if (!ina260Sensor.isInitialized())
@@ -614,7 +648,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false);
+    doDeepSleep(DELAY_FOREVER, false, false);
 #endif
 }
 
@@ -1155,4 +1189,4 @@ bool Power::lipoInit()
 {
     return false;
 }
-#endif
+#endif

src/PowerFSM.cpp

@@ -19,6 +19,10 @@
 #include "sleep.h"
 #include "target_specific.h"
 
+#if HAS_WIFI && !defined(ARCH_PORTDUINO)
+#include "mesh/wifi/WiFiAPClient.h"
+#endif
+
 #ifndef SLEEP_TIME
 #define SLEEP_TIME 30
 #endif
@@ -55,9 +59,14 @@ static void sdsEnter()
 {
     LOG_DEBUG("State: SDS");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false);
 }
 
+static void lowBattSDSEnter()
+{
+    LOG_DEBUG("State: Lower batt SDS");
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true);
+}
 extern Power *power;
 
 static void shutdownEnter()
@@ -247,6 +256,7 @@ static void bootEnter()
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
 State stateSDS(sdsEnter, NULL, NULL, "SDS");
+State stateLowBattSDS(lowBattSDSEnter, NULL, NULL, "SDS");
 State stateLS(lsEnter, lsIdle, lsExit, "LS");
 State stateNB(nbEnter, NULL, NULL, "NB");
 State stateDARK(darkEnter, NULL, NULL, "DARK");
@@ -291,12 +301,12 @@ void PowerFSM_setup()
                             "Press"); // Allow button to work while in serial API
 
     // Handle critically low power battery by forcing deep sleep
-    powerFSM.add_transition(&stateBOOT, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateLS, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateNB, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateDARK, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateON, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
-    powerFSM.add_transition(&stateSERIAL, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateBOOT, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateLS, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateNB, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateDARK, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateON, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
+    powerFSM.add_transition(&stateSERIAL, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat");
 
     // Handle being told to power off
     powerFSM.add_transition(&stateBOOT, &stateSHUTDOWN, EVENT_SHUTDOWN, NULL, "Shutdown");
@@ -371,9 +381,9 @@ void PowerFSM_setup()
 // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 #ifdef ARCH_ESP32
     // See: https://github.com/meshtastic/firmware/issues/1071
-    // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiated through the
-    // modules
-    if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
+    // Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated
+    // through the modules
+    if ((isRouter || config.power.is_power_saving) && !isWifiAvailable() && !isTrackerOrSensor) {
         powerFSM.add_timed_transition(&stateNB, &stateLS,
                                       Default::getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
                                       "Min wake timeout");

src/SafeFile.cpp

@@ -5,6 +5,14 @@
 // Only way to work on both esp32 and nrf52
 static File openFile(const char *filename, bool fullAtomic)
 {
+    concurrency::LockGuard g(spiLock);
+    LOG_DEBUG("Opening %s, fullAtomic=%d", filename, fullAtomic);
+#ifdef ARCH_NRF52
+    lfs_assert_failed = false;
+    File file = FSCom.open(filename, FILE_O_WRITE);
+    file.seek(0);
+    return file;
+#endif
     if (!fullAtomic)
         FSCom.remove(filename); // Nuke the old file to make space (ignore if it !exists)
 
@@ -13,7 +21,6 @@ static File openFile(const char *filename, bool fullAtomic)
 
     // clear any previous LFS errors
     lfs_assert_failed = false;
-
     return FSCom.open(filenameTmp.c_str(), FILE_O_WRITE);
 }
 
@@ -53,14 +60,26 @@ bool SafeFile::close()
     if (!f)
         return false;
 
+    spiLock->lock();
+#ifdef ARCH_NRF52
+    f.truncate();
+#endif
     f.close();
+    spiLock->unlock();
+
+#ifdef ARCH_NRF52
+    return true;
+#endif
     if (!testReadback())
         return false;
 
-    // brief window of risk here ;-)
-    if (fullAtomic && FSCom.exists(filename.c_str()) && !FSCom.remove(filename.c_str())) {
-        LOG_ERROR("Can't remove old pref file");
-        return false;
+    { // Scope for lock
+        concurrency::LockGuard g(spiLock);
+        // brief window of risk here ;-)
+        if (fullAtomic && FSCom.exists(filename.c_str()) && !FSCom.remove(filename.c_str())) {
+            LOG_ERROR("Can't remove old pref file");
+            return false;
+        }
     }
 
     String filenameTmp = filename;
@@ -76,6 +95,7 @@ bool SafeFile::close()
 /// Read our (closed) tempfile back in and compare the hash
 bool SafeFile::testReadback()
 {
+    concurrency::LockGuard g(spiLock);
     bool lfs_failed = lfs_assert_failed;
     lfs_assert_failed = false;
 

src/SafeFile.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "FSCommon.h"
+#include "SPILock.h"
 #include "configuration.h"
 
 #ifdef FSCom

src/airtime.cpp

@@ -13,17 +13,17 @@ void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms)
 {
 
     if (reportType == TX_LOG) {
-        LOG_DEBUG("Packet transmitted : %ums", airtime_ms);
+        LOG_DEBUG("Packet TX: %ums", airtime_ms);
         this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms;
         air_period_tx[0] = air_period_tx[0] + airtime_ms;
 
         this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms;
     } else if (reportType == RX_LOG) {
-        LOG_DEBUG("Packet received : %ums", airtime_ms);
+        LOG_DEBUG("Packet RX: %ums", airtime_ms);
         this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms;
         air_period_rx[0] = air_period_rx[0] + airtime_ms;
     } else if (reportType == RX_ALL_LOG) {
-        LOG_DEBUG("Packet received (noise?) : %ums", airtime_ms);
+        LOG_DEBUG("Packet RX (noise?) : %ums", airtime_ms);
         this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms;
     }
 
@@ -126,7 +126,7 @@ bool AirTime::isTxAllowedChannelUtil(bool polite)
     if (channelUtilizationPercent() < percentage) {
         return true;
     } else {
-        LOG_WARN("Channel utilization is >%d percent. Skip opportunity to send.", percentage);
+        LOG_WARN("Ch. util >%d%%. Skip send", percentage);
         return false;
     }
 }
@@ -137,8 +137,7 @@ bool AirTime::isTxAllowedAirUtil()
         if (utilizationTXPercent() < myRegion->dutyCycle * polite_duty_cycle_percent / 100) {
             return true;
         } else {
-            LOG_WARN("Tx air utilization is >%f percent. Skip opportunity to send.",
-                     myRegion->dutyCycle * polite_duty_cycle_percent / 100);
+            LOG_WARN("TX air util. >%f%%. Skip send", myRegion->dutyCycle * polite_duty_cycle_percent / 100);
             return false;
         }
     }

src/configuration.h

@@ -148,13 +148,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NAU7802_ADDR 0x2A
 #define MAX30102_ADDR 0x57
 #define MLX90614_ADDR_DEF 0x5A
+#define CGRADSENS_ADDR 0x66
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
 // -----------------------------------------------------------------------------
 #define MPU6050_ADDR 0x68
-#define STK8BXX_ADR 0x18
-#define LIS3DH_ADR 0x18
+#define STK8BXX_ADDR 0x18
+#define LIS3DH_ADDR 0x18
+#define LIS3DH_ADDR_ALT 0x19
 #define BMA423_ADDR 0x19
 #define LSM6DS3_ADDR 0x6A
 #define BMX160_ADDR 0x69
@@ -169,7 +171,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // Security
 // -----------------------------------------------------------------------------
-#define ATECC608B_ADDR 0x35
 
 // -----------------------------------------------------------------------------
 // IO Expander
@@ -177,13 +178,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TCA9535_ADDR 0x20
 #define TCA9555_ADDR 0x26
 
-// -----------------------------------------------------------------------------
-// GPS
-// -----------------------------------------------------------------------------
-#ifndef GPS_THREAD_INTERVAL
-#define GPS_THREAD_INTERVAL 200
-#endif
-
 // -----------------------------------------------------------------------------
 // Touchscreen
 // -----------------------------------------------------------------------------
@@ -205,6 +199,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VEXT_ON_VALUE LOW
 #endif
 
+// -----------------------------------------------------------------------------
+// GPS
+// -----------------------------------------------------------------------------
+
 #ifndef GPS_BAUDRATE
 #define GPS_BAUDRATE 9600
 #define GPS_BAUDRATE_FIXED 0
@@ -212,6 +210,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define GPS_BAUDRATE_FIXED 1
 #endif
 
+#ifndef GPS_THREAD_INTERVAL
+#define GPS_THREAD_INTERVAL 200
+#endif
+
 /* Step #2: follow with defines common to the architecture;
    also enable HAS_ option not specifically disabled by variant.h */
 #include "architecture.h"
@@ -249,6 +251,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HAS_SCREEN
 #define HAS_SCREEN 0
 #endif
+#ifndef HAS_TFT
+#define HAS_TFT 0
+#endif
 #ifndef HAS_WIRE
 #define HAS_WIRE 0
 #endif
@@ -311,6 +316,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_AUDIO 1
 #define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
 #define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1
+#define MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY 1
 #define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1
 #define MESHTASTIC_EXCLUDE_PAXCOUNTER 1
 #define MESHTASTIC_EXCLUDE_POWER_TELEMETRY 1

src/detect/ScanI2C.h

@@ -12,7 +12,6 @@ class ScanI2C
         SCREEN_SH1106,
         SCREEN_UNKNOWN, // has the same address as the two above but does not respond to the same commands
         SCREEN_ST7567,
-        ATECC608B,
         RTC_RV3028,
         RTC_PCF8563,
         CARDKB,
@@ -63,7 +62,10 @@ class ScanI2C
         ICM20948,
         MAX30102,
         TPS65233,
-        MPR121KB
+        MPR121KB,
+        CGRADSENS,
+        INA226,
+        NXP_SE050,
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;
@@ -127,4 +129,4 @@ class ScanI2C
 
   private:
     bool shouldSuppressScreen = false;
-};
+};

src/detect/ScanI2CTwoWire.cpp

@@ -7,7 +7,6 @@
 #include "linux/LinuxHardwareI2C.h"
 #endif
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-#include "main.h"      // atecc
 #include "meshUtils.h" // vformat
 #endif
 
@@ -72,10 +71,10 @@ ScanI2C::DeviceType ScanI2CTwoWire::probeOLED(ScanI2C::DeviceAddress addr) const
         r &= 0x0f;
 
         if (r == 0x08 || r == 0x00) {
-            LOG_INFO("sh1106 display found");
+            logFoundDevice("SH1106", (uint8_t)addr.address);
             o_probe = SCREEN_SH1106; // SH1106
         } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) {
-            LOG_INFO("ssd1306 display found");
+            logFoundDevice("SSD1306", (uint8_t)addr.address);
             o_probe = SCREEN_SSD1306; // SSD1306
         }
         c++;
@@ -84,40 +83,6 @@ ScanI2C::DeviceType ScanI2CTwoWire::probeOLED(ScanI2C::DeviceAddress addr) const
 
     return o_probe;
 }
-void ScanI2CTwoWire::printATECCInfo() const
-{
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-    atecc.readConfigZone(false);
-
-    std::string atecc_numbers = "ATECC608B Serial Number: ";
-    for (int i = 0; i < 9; i++) {
-        atecc_numbers += vformat("%02x", atecc.serialNumber[i]);
-    }
-
-    atecc_numbers += ", Rev Number: ";
-    for (int i = 0; i < 4; i++) {
-        atecc_numbers += vformat("%02x", atecc.revisionNumber[i]);
-    }
-    LOG_DEBUG(atecc_numbers.c_str());
-
-    LOG_DEBUG("ATECC608B Config %s, Data %s, Slot 0 %s", atecc.configLockStatus ? "Locked" : "Unlocked",
-              atecc.dataOTPLockStatus ? "Locked" : "Unlocked", atecc.slot0LockStatus ? "Locked" : "Unlocked");
-
-    std::string atecc_publickey = "";
-    if (atecc.configLockStatus && atecc.dataOTPLockStatus && atecc.slot0LockStatus) {
-        if (atecc.generatePublicKey() == false) {
-            atecc_publickey += "ATECC608B Error generating public key";
-        } else {
-            atecc_publickey += "ATECC608B Public Key: ";
-            for (int i = 0; i < 64; i++) {
-                atecc_publickey += vformat("%02x", atecc.publicKey64Bytes[i]);
-            }
-        }
-        LOG_DEBUG(atecc_publickey.c_str());
-    }
-#endif
-}
-
 uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation &registerLocation,
                                           ScanI2CTwoWire::ResponseWidth responseWidth) const
 {
@@ -129,7 +94,6 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
     i2cBus->endTransmission();
     delay(20);
     i2cBus->requestFrom(registerLocation.i2cAddress.address, responseWidth);
-    LOG_DEBUG("Wire.available() = %d", i2cBus->available());
     if (i2cBus->available() == 2) {
         // Read MSB, then LSB
         value = (uint16_t)i2cBus->read() << 8;
@@ -142,7 +106,7 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
 
 #define SCAN_SIMPLE_CASE(ADDR, T, ...)                                                                                           \
     case ADDR:                                                                                                                   \
-        LOG_INFO(__VA_ARGS__);                                                                                                   \
+        logFoundDevice(__VA_ARGS__);                                                                                             \
         type = T;                                                                                                                \
         break;
 
@@ -184,50 +148,36 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 
     for (addr.address = 8; addr.address < 120; addr.address++) {
         if (asize != 0) {
-            if (!in_array(address, asize, addr.address))
+            if (!in_array(address, asize, (uint8_t)addr.address))
                 continue;
-            LOG_DEBUG("Scan address 0x%x", addr.address);
+            LOG_DEBUG("Scan address 0x%x", (uint8_t)addr.address);
         }
         i2cBus->beginTransmission(addr.address);
 #ifdef ARCH_PORTDUINO
-        if (i2cBus->read() != -1)
-            err = 0;
-        else
+        err = 2;
+        if ((addr.address >= 0x30 && addr.address <= 0x37) || (addr.address >= 0x50 && addr.address <= 0x5F)) {
+            if (i2cBus->read() != -1)
+                err = 0;
+        } else {
+            err = i2cBus->writeQuick((uint8_t)0);
+        }
+        if (err != 0)
             err = 2;
 #else
         err = i2cBus->endTransmission();
 #endif
         type = NONE;
         if (err == 0) {
-            LOG_DEBUG("I2C device found at address 0x%x", addr.address);
-
             switch (addr.address) {
             case SSD1306_ADDRESS:
                 type = probeOLED(addr);
                 break;
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-            case ATECC608B_ADDR:
-#ifdef RP2040_SLOW_CLOCK
-                if (atecc.begin(addr.address, Wire, Serial2) == true)
-#else
-                if (atecc.begin(addr.address) == true)
-#endif
-
-                {
-                    LOG_INFO("ATECC608B initialized");
-                } else {
-                    LOG_WARN("ATECC608B initialization failed");
-                }
-                printATECCInfo();
-                break;
-#endif
-
 #ifdef RV3028_RTC
             case RV3028_RTC:
                 // foundDevices[addr] = RTC_RV3028;
                 type = RTC_RV3028;
-                LOG_INFO("RV3028 RTC found");
+                logFoundDevice("RV3028", (uint8_t)addr.address);
                 rtc.initI2C(*i2cBus);
                 rtc.writeToRegister(0x35, 0x07); // no Clkout
                 rtc.writeToRegister(0x37, 0xB4);
@@ -235,7 +185,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
 #ifdef PCF8563_RTC
-                SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563 RTC found")
+                SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563", (uint8_t)addr.address)
 #endif
 
             case CARDKB_ADDR:
@@ -243,50 +193,50 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
                 if (registerValue == 0x02) {
                     // KEYPAD_VERSION
-                    LOG_INFO("RAK14004 found");
+                    logFoundDevice("RAK14004", (uint8_t)addr.address);
                     type = RAK14004;
                 } else {
-                    LOG_INFO("m5 cardKB found");
+                    logFoundDevice("M5 cardKB", (uint8_t)addr.address);
                     type = CARDKB;
                 }
                 break;
 
-                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard found");
-                SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10 keyboard found");
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address);
 
-                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found");
+                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address);
 #ifdef HAS_NCP5623
-                SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found");
+                SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623", (uint8_t)addr.address);
 #endif
 #ifdef HAS_PMU
-                SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found")
+                SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "AXP192/AXP2101", (uint8_t)addr.address)
 #endif
             case BME_ADDR:
             case BME_ADDR_ALTERNATE:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xD0), 1); // GET_ID
                 switch (registerValue) {
                 case 0x61:
-                    LOG_INFO("BME-680 sensor found at address 0x%x", (uint8_t)addr.address);
+                    logFoundDevice("BME680", (uint8_t)addr.address);
                     type = BME_680;
                     break;
                 case 0x60:
-                    LOG_INFO("BME-280 sensor found at address 0x%x", (uint8_t)addr.address);
+                    logFoundDevice("BME280", (uint8_t)addr.address);
                     type = BME_280;
                     break;
                 case 0x55:
-                    LOG_INFO("BMP-085 or BMP-180 sensor found at address 0x%x", (uint8_t)addr.address);
+                    logFoundDevice("BMP085/BMP180", (uint8_t)addr.address);
                     type = BMP_085;
                     break;
                 default:
                     registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // GET_ID
                     switch (registerValue) {
                     case 0x50: // BMP-388 should be 0x50
-                        LOG_INFO("BMP-388 sensor found at address 0x%x", (uint8_t)addr.address);
+                        logFoundDevice("BMP-388", (uint8_t)addr.address);
                         type = BMP_3XX;
                         break;
                     case 0x58: // BMP-280 should be 0x58
                     default:
-                        LOG_INFO("BMP-280 sensor found at address 0x%x", (uint8_t)addr.address);
+                        logFoundDevice("BMP-280", (uint8_t)addr.address);
                         type = BMP_280;
                         break;
                     }
@@ -295,7 +245,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 #ifndef HAS_NCP5623
             case AHT10_ADDR:
-                LOG_INFO("AHT10 sensor found at address 0x%x", (uint8_t)addr.address);
+                logFoundDevice("AHT10", (uint8_t)addr.address);
                 type = AHT10;
                 break;
 #endif
@@ -305,41 +255,65 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
                 LOG_DEBUG("Register MFG_UID: 0x%x", registerValue);
                 if (registerValue == 0x5449) {
-                    LOG_INFO("INA260 sensor found at address 0x%x", (uint8_t)addr.address);
-                    type = INA260;
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 2);
+                    LOG_DEBUG("Register DIE_UID: 0x%x", registerValue);
+
+                    if (registerValue == 0x2260) {
+                        logFoundDevice("INA226", (uint8_t)addr.address);
+                        type = INA226;
+                    } else {
+                        logFoundDevice("INA260", (uint8_t)addr.address);
+                        type = INA260;
+                    }
                 } else { // Assume INA219 if INA260 ID is not found
-                    LOG_INFO("INA219 sensor found at address 0x%x", (uint8_t)addr.address);
+                    logFoundDevice("INA219", (uint8_t)addr.address);
                     type = INA219;
                 }
                 break;
             case INA3221_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
-                LOG_DEBUG("Register MFG_UID: 0x%x", registerValue);
+                LOG_DEBUG("Register MFG_UID FE: 0x%x", registerValue);
                 if (registerValue == 0x5449) {
-                    LOG_INFO("INA3221 sensor found at address 0x%x", (uint8_t)addr.address);
+                    logFoundDevice("INA3221", (uint8_t)addr.address);
                     type = INA3221;
                 } else {
-                    LOG_INFO("DFRobot Lark weather station found at address 0x%x", (uint8_t)addr.address);
-                    type = DFROBOT_LARK;
+                    /* check the first 2 bytes of the 6 byte response register
+                    LARK FW 1.0 should return:
+                    RESPONSE_STATUS STATUS_SUCCESS (0x53)
+                    RESPONSE_CMD CMD_GET_VERSION (0x05)
+                    RESPONSE_LEN_L 0x02
+                    RESPONSE_LEN_H 0x00
+                    RESPONSE_PAYLOAD 0x01
+                    RESPONSE_PAYLOAD+1 0x00
+                    */
+                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x05), 2);
+                    LOG_DEBUG("Register MFG_UID 05: 0x%x", registerValue);
+                    if (registerValue == 0x5305) {
+                        logFoundDevice("DFRobot Lark", (uint8_t)addr.address);
+                        type = DFROBOT_LARK;
+                    }
+                    // else: probably a RAK12500/UBLOX GPS on I2C
                 }
                 break;
             case MCP9808_ADDR:
                 // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some
                 // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips.
                 {
+#ifdef HAS_STK8XXX
                     // Check register 0x00 for 0x8700 response to ID STK8BA53 chip.
                     registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 2);
                     if (registerValue == 0x8700) {
                         type = STK8BAXX;
-                        LOG_INFO("STK8BAXX accelerometer found");
+                        logFoundDevice("STK8BAXX", (uint8_t)addr.address);
                         break;
                     }
+#endif
 
                     // Check register 0x07 for 0x0400 response to ID MCP9808 chip.
                     registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
                     if (registerValue == 0x0400) {
                         type = MCP9808;
-                        LOG_INFO("MCP9808 sensor found");
+                        logFoundDevice("MCP9808", (uint8_t)addr.address);
                         break;
                     }
 
@@ -347,7 +321,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2);
                     if (registerValue == 0x3300 || registerValue == 0x3333) { // RAK4631 WisBlock has LIS3DH register at 0x3333
                         type = LIS3DH;
-                        LOG_INFO("LIS3DH accelerometer found");
+                        logFoundDevice("LIS3DH", (uint8_t)addr.address);
                     }
                     break;
                 }
@@ -355,83 +329,91 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
                 if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c) {
                     type = SHT4X;
-                    LOG_INFO("SHT4X sensor found");
+                    logFoundDevice("SHT4X", (uint8_t)addr.address);
                 } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
                     type = OPT3001;
-                    LOG_INFO("OPT3001 light sensor found");
+                    logFoundDevice("OPT3001", (uint8_t)addr.address);
                 } else {
                     type = SHT31;
-                    LOG_INFO("SHT31 sensor found");
+                    logFoundDevice("SHT31", (uint8_t)addr.address);
                 }
 
                 break;
 
-                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3 sensor found")
+                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3", (uint8_t)addr.address)
             case RCWL9620_ADDR:
                 // get MAX30102 PARTID
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 1);
                 if (registerValue == 0x15) {
                     type = MAX30102;
-                    LOG_INFO("MAX30102 Health sensor found");
+                    logFoundDevice("MAX30102", (uint8_t)addr.address);
                     break;
                 } else {
                     type = RCWL9620;
-                    LOG_INFO("RCWL9620 sensor found");
+                    logFoundDevice("RCWL9620", (uint8_t)addr.address);
                 }
                 break;
 
             case LPS22HB_ADDR_ALT:
-                SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found")
-
-                SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found")
+                SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310", (uint8_t)addr.address)
 
             case QMI8658_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0A), 1); // get ID
                 if (registerValue == 0xC0) {
                     type = BQ24295;
-                    LOG_INFO("BQ24295 PMU found");
+                    logFoundDevice("BQ24295", (uint8_t)addr.address);
                     break;
                 }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
                 if (registerValue == 0x6A) {
                     type = LSM6DS3;
-                    LOG_INFO("LSM6DS3 accelerometer found at address 0x%x", (uint8_t)addr.address);
+                    logFoundDevice("LSM6DS3", (uint8_t)addr.address);
                 } else {
                     type = QMI8658;
-                    LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found");
+                    logFoundDevice("QMI8658", (uint8_t)addr.address);
                 }
                 break;
 
-                SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found")
-                SCAN_SIMPLE_CASE(HMC5883L_ADDR, HMC5883L, "HMC5883L 3-Axis digital compass found")
+                SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L", (uint8_t)addr.address)
+                SCAN_SIMPLE_CASE(HMC5883L_ADDR, HMC5883L, "HMC5883L", (uint8_t)addr.address)
 #ifdef HAS_QMA6100P
-                SCAN_SIMPLE_CASE(QMA6100P_ADDR, QMA6100P, "QMA6100P accelerometer found")
+                SCAN_SIMPLE_CASE(QMA6100P_ADDR, QMA6100P, "QMA6100P", (uint8_t)addr.address)
 #else
-                SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found")
+                SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031", (uint8_t)addr.address)
 #endif
-                SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found");
-                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535 I2C expander found");
-                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found");
-                SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700 light sensor found");
-                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591 light sensor found");
-                SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001 light sensor found");
-                SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632 IR temp sensor found");
-                SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802 based scale found");
-                SCAN_SIMPLE_CASE(FT6336U_ADDR, FT6336U, "FT6336U touchscreen found");
-                SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048 lipo fuel gauge found");
+            case BMA423_ADDR: // this can also be LIS3DH_ADDR_ALT
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2);
+                if (registerValue == 0x3300 || registerValue == 0x3333) { // RAK4631 WisBlock has LIS3DH register at 0x3333
+                    type = LIS3DH;
+                    logFoundDevice("LIS3DH", (uint8_t)addr.address);
+                } else {
+                    type = BMA423;
+                    logFoundDevice("BMA423", (uint8_t)addr.address);
+                }
+                break;
+
+                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address);
 #ifdef HAS_TPS65233
-                SCAN_SIMPLE_CASE(TPS65233_ADDR, TPS65233, "TPS65233 BIAS-T found");
+                SCAN_SIMPLE_CASE(TPS65233_ADDR, TPS65233, "TPS65233", (uint8_t)addr.address);
 #endif
 
             case MLX90614_ADDR_DEF:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1);
                 if (registerValue == 0x5a) {
                     type = MLX90614;
-                    LOG_INFO("MLX90614 IR temp sensor found");
+                    logFoundDevice("MLX90614", (uint8_t)addr.address);
                 } else {
                     type = MPR121KB;
-                    LOG_INFO("MPR121KB keyboard found");
+                    logFoundDevice("MPR121KB", (uint8_t)addr.address);
                 }
                 break;
 
@@ -440,24 +422,57 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
                 if (registerValue == 0xEA) {
                     type = ICM20948;
-                    LOG_INFO("ICM20948 9-dof motion processor found");
+                    logFoundDevice("ICM20948", (uint8_t)addr.address);
                     break;
                 } else if (addr.address == BMX160_ADDR) {
                     type = BMX160;
-                    LOG_INFO("BMX160 accelerometer found");
+                    logFoundDevice("BMX160", (uint8_t)addr.address);
                     break;
                 } else {
                     type = MPU6050;
-                    LOG_INFO("MPU6050 accelerometer found");
+                    logFoundDevice("MPU6050", (uint8_t)addr.address);
                     break;
                 }
                 break;
 
+            case CGRADSENS_ADDR:
+                // Register 0x00 of the RadSens sensor contains is product identifier 0x7D
+                // Undocumented, but some devices return a product identifier of 0x7A
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
+                if (registerValue == 0x7D || registerValue == 0x7A) {
+                    type = CGRADSENS;
+                    logFoundDevice("ClimateGuard RadSens", (uint8_t)addr.address);
+                    break;
+                } else {
+                    LOG_DEBUG("Unexpected Device ID for RadSense: addr=0x%x id=0x%x", CGRADSENS_ADDR, registerValue);
+                }
+                break;
+
+            case 0x48: {
+                i2cBus->beginTransmission(addr.address);
+                uint8_t getInfo[] = {0x5A, 0xC0, 0x00, 0xFF, 0xFC};
+                uint8_t expectedInfo[] = {0xa5, 0xE0, 0x00, 0x3F, 0x19};
+                uint8_t info[5];
+                size_t len = 0;
+                i2cBus->write(getInfo, 5);
+                i2cBus->endTransmission();
+                len = i2cBus->readBytes(info, 5);
+                if (len == 5 && memcmp(expectedInfo, info, len) == 0) {
+                    LOG_INFO("NXP SE050 crypto chip found");
+                    type = NXP_SE050;
+
+                } else {
+                    LOG_INFO("FT6336U touchscreen found");
+                    type = FT6336U;
+                }
+                break;
+            }
+
             default:
-                LOG_INFO("Device found at address 0x%x was not able to be enumerated", addr.address);
+                LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address);
             }
         } else if (err == 4) {
-            LOG_ERROR("Unknown error at address 0x%x", addr.address);
+            LOG_ERROR("Unknown error at address 0x%x", (uint8_t)addr.address);
         }
 
         // Check if a type was found for the enumerated device - save, if so
@@ -490,4 +505,9 @@ size_t ScanI2CTwoWire::countDevices() const
 {
     return foundDevices.size();
 }
-#endif
+
+void ScanI2CTwoWire::logFoundDevice(const char *device, uint8_t address)
+{
+    LOG_INFO("%s found at address 0x%x", device, address);
+}
+#endif

src/detect/ScanI2CTwoWire.h

@@ -53,10 +53,10 @@ class ScanI2CTwoWire : public ScanI2C
 
     concurrency::Lock lock;
 
-    void printATECCInfo() const;
-
     uint16_t getRegisterValue(const RegisterLocation &, ResponseWidth) const;
 
     DeviceType probeOLED(ScanI2C::DeviceAddress) const;
+
+    static void logFoundDevice(const char *device, uint8_t address);
 };
 #endif

src/gps/GPS.cpp

@@ -28,29 +28,47 @@
 #define GPS_RESET_MODE HIGH
 #endif
 
+// Not all platforms have std::size().
+template <typename T, std::size_t N> std::size_t array_count(const T (&)[N])
+{
+    return N;
+}
+
 #if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
+#if defined(RAK2560)
+HardwareSerial *GPS::_serial_gps = &Serial2;
+#else
 HardwareSerial *GPS::_serial_gps = &Serial1;
+#endif
 #elif defined(ARCH_RP2040)
 SerialUART *GPS::_serial_gps = &Serial1;
 #else
-HardwareSerial *GPS::_serial_gps = NULL;
+HardwareSerial *GPS::_serial_gps = nullptr;
 #endif
 
 GPS *gps = nullptr;
 
-GPSUpdateScheduling scheduling;
+static const char *ACK_SUCCESS_MESSAGE = "Get ack success!";
+
+static GPSUpdateScheduling scheduling;
 
 /// Multiple GPS instances might use the same serial port (in sequence), but we can
 /// only init that port once.
 static bool didSerialInit;
 
-struct uBloxGnssModelInfo info;
-uint8_t uBloxProtocolVersion;
+static struct uBloxGnssModelInfo {
+    char swVersion[30];
+    char hwVersion[10];
+    uint8_t extensionNo;
+    char extension[10][30];
+    uint8_t protocol_version;
+} ublox_info;
+
 #define GPS_SOL_EXPIRY_MS 5000 // in millis. give 1 second time to combine different sentences. NMEA Frequency isn't higher anyway
 #define NMEA_MSG_GXGSA "GNGSA" // GSA message (GPGSA, GNGSA etc)
 
 // For logging
-const char *getGPSPowerStateString(GPSPowerState state)
+static const char *getGPSPowerStateString(GPSPowerState state)
 {
     switch (state) {
     case GPS_ACTIVE:
@@ -69,7 +87,7 @@ const char *getGPSPowerStateString(GPSPowerState state)
     }
 }
 
-void GPS::UBXChecksum(uint8_t *message, size_t length)
+static void UBXChecksum(uint8_t *message, size_t length)
 {
     uint8_t CK_A = 0, CK_B = 0;
 
@@ -85,7 +103,7 @@ void GPS::UBXChecksum(uint8_t *message, size_t length)
 }
 
 // Calculate the checksum for a CAS packet
-void GPS::CASChecksum(uint8_t *message, size_t length)
+static void CASChecksum(uint8_t *message, size_t length)
 {
     uint32_t cksum = ((uint32_t)message[5] << 24); // Message ID
     cksum += ((uint32_t)message[4]) << 16;         // Class
@@ -410,6 +428,15 @@ int GPS::getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
     return 0;
 }
 
+#if GPS_BAUDRATE_FIXED
+// if GPS_BAUDRATE is specified in variant, only try that.
+static const int serialSpeeds[1] = {GPS_BAUDRATE};
+static const int rareSerialSpeeds[1] = {GPS_BAUDRATE};
+#else
+static const int serialSpeeds[3] = {9600, 115200, 38400};
+static const int rareSerialSpeeds[3] = {4800, 57600, GPS_BAUDRATE};
+#endif
+
 /**
  * @brief  Setup the GPS based on the model detected.
  *  We detect the GPS by cycling through a set of baud rates, first common then rare.
@@ -419,7 +446,6 @@ int GPS::getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
  */
 bool GPS::setup()
 {
-
     if (!didSerialInit) {
         int msglen = 0;
         if (tx_gpio && gnssModel == GNSS_MODEL_UNKNOWN) {
@@ -427,7 +453,7 @@ bool GPS::setup()
                 LOG_DEBUG("Probe for GPS at %d", serialSpeeds[speedSelect]);
                 gnssModel = probe(serialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (++speedSelect == sizeof(serialSpeeds) / sizeof(int)) {
+                    if (++speedSelect == array_count(serialSpeeds)) {
                         speedSelect = 0;
                         ++probeTries;
                     }
@@ -438,7 +464,7 @@ bool GPS::setup()
                 LOG_DEBUG("Probe for GPS at %d", rareSerialSpeeds[speedSelect]);
                 gnssModel = probe(rareSerialSpeeds[speedSelect]);
                 if (gnssModel == GNSS_MODEL_UNKNOWN) {
-                    if (++speedSelect == sizeof(rareSerialSpeeds) / sizeof(int)) {
+                    if (++speedSelect == array_count(rareSerialSpeeds)) {
                         LOG_WARN("Give up on GPS probe and set to %d", GPS_BAUDRATE);
                         return true;
                     }
@@ -634,7 +660,7 @@ bool GPS::setup()
             SEND_UBX_PACKET(0x06, 0x01, _message_RMC, "enable NMEA RMC", 500);
             SEND_UBX_PACKET(0x06, 0x01, _message_GGA, "enable NMEA GGA", 500);
 
-            if (uBloxProtocolVersion >= 18) {
+            if (ublox_info.protocol_version >= 18) {
                 clearBuffer();
                 SEND_UBX_PACKET(0x06, 0x86, _message_PMS, "enable powersave for GPS", 500);
                 SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersave details for GPS", 500);
@@ -718,6 +744,7 @@ GPS::~GPS()
     // we really should unregister our sleep observer
     notifyDeepSleepObserver.unobserve(&notifyDeepSleep);
 }
+
 // Put the GPS hardware into a specified state
 void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
 {
@@ -788,13 +815,14 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
 void GPS::writePinEN(bool on)
 {
     // Abort: if conflict with Canned Messages when using Wisblock(?)
-    if (HW_VENDOR == meshtastic_HardwareModel_RAK4631 && (rotaryEncoderInterruptImpl1 || upDownInterruptImpl1))
+    if ((HW_VENDOR == meshtastic_HardwareModel_RAK4631 || HW_VENDOR == meshtastic_HardwareModel_WISMESH_TAP) &&
+        (rotaryEncoderInterruptImpl1 || upDownInterruptImpl1))
         return;
 
     // Write and log
     enablePin->set(on);
 #ifdef GPS_DEBUG
-    LOG_DEBUG("Pin EN %s", val == HIGH ? "HI" : "LOW");
+    LOG_DEBUG("Pin EN %s", on == HIGH ? "HI" : "LOW");
 #endif
 }
 
@@ -881,17 +909,17 @@ void GPS::setPowerUBLOX(bool on, uint32_t sleepMs)
         if (gnssModel != GNSS_MODEL_UBLOX10) {
             // Encode the sleep time in millis into the packet
             for (int i = 0; i < 4; i++)
-                gps->_message_PMREQ[0 + i] = sleepMs >> (i * 8);
+                _message_PMREQ[0 + i] = sleepMs >> (i * 8);
 
             // Record the message length
-            msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ), gps->_message_PMREQ);
+            msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ), _message_PMREQ);
         } else {
             // Encode the sleep time in millis into the packet
             for (int i = 0; i < 4; i++)
-                gps->_message_PMREQ_10[4 + i] = sleepMs >> (i * 8);
+                _message_PMREQ_10[4 + i] = sleepMs >> (i * 8);
 
             // Record the message length
-            msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ_10), gps->_message_PMREQ_10);
+            msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ_10), _message_PMREQ_10);
         }
 
         // Send the UBX packet
@@ -1098,17 +1126,19 @@ int GPS::prepareDeepSleep(void *unused)
     return 0;
 }
 
-const char *PROBE_MESSAGE = "Trying %s (%s)...";
-const char *DETECTED_MESSAGE = "%s detected, using %s Module";
+static const char *PROBE_MESSAGE = "Trying %s (%s)...";
+static const char *DETECTED_MESSAGE = "%s detected, using %s Module";
 
 #define PROBE_SIMPLE(CHIP, TOWRITE, RESPONSE, DRIVER, TIMEOUT, ...)                                                              \
-    LOG_DEBUG(PROBE_MESSAGE, TOWRITE, CHIP);                                                                                     \
-    clearBuffer();                                                                                                               \
-    _serial_gps->write(TOWRITE "\r\n");                                                                                          \
-    if (getACK(RESPONSE, TIMEOUT) == GNSS_RESPONSE_OK) {                                                                         \
-        LOG_INFO(DETECTED_MESSAGE, CHIP, #DRIVER);                                                                               \
-        return DRIVER;                                                                                                           \
-    }
+    do {                                                                                                                         \
+        LOG_DEBUG(PROBE_MESSAGE, TOWRITE, CHIP);                                                                                 \
+        clearBuffer();                                                                                                           \
+        _serial_gps->write(TOWRITE "\r\n");                                                                                      \
+        if (getACK(RESPONSE, TIMEOUT) == GNSS_RESPONSE_OK) {                                                                     \
+            LOG_INFO(DETECTED_MESSAGE, CHIP, #DRIVER);                                                                           \
+            return DRIVER;                                                                                                       \
+        }                                                                                                                        \
+    } while (0)
 
 GnssModel_t GPS::probe(int serialSpeed)
 {
@@ -1126,7 +1156,7 @@ GnssModel_t GPS::probe(int serialSpeed)
     }
 #endif
 
-    memset(&info, 0, sizeof(struct uBloxGnssModelInfo));
+    memset(&ublox_info, 0, sizeof(ublox_info));
     uint8_t buffer[768] = {0};
     delay(100);
 
@@ -1164,6 +1194,8 @@ GnssModel_t GPS::probe(int serialSpeed)
     PROBE_SIMPLE("L76B", "$PMTK605*31", "Quectel-L76B", GNSS_MODEL_MTK_L76B, 500);
     PROBE_SIMPLE("PA1616S", "$PMTK605*31", "1616S", GNSS_MODEL_MTK_PA1616S, 500);
 
+    PROBE_SIMPLE("LS20031", "$PMTK605*31", "MC-1513", GNSS_MODEL_LS20031, 500);
+
     uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
     UBXChecksum(cfg_rate, sizeof(cfg_rate));
     clearBuffer();
@@ -1193,64 +1225,64 @@ GnssModel_t GPS::probe(int serialSpeed)
     if (len) {
         uint16_t position = 0;
         for (int i = 0; i < 30; i++) {
-            info.swVersion[i] = buffer[position];
+            ublox_info.swVersion[i] = buffer[position];
             position++;
         }
         for (int i = 0; i < 10; i++) {
-            info.hwVersion[i] = buffer[position];
+            ublox_info.hwVersion[i] = buffer[position];
             position++;
         }
 
         while (len >= position + 30) {
             for (int i = 0; i < 30; i++) {
-                info.extension[info.extensionNo][i] = buffer[position];
+                ublox_info.extension[ublox_info.extensionNo][i] = buffer[position];
                 position++;
             }
-            info.extensionNo++;
-            if (info.extensionNo > 9)
+            ublox_info.extensionNo++;
+            if (ublox_info.extensionNo > 9)
                 break;
         }
 
         LOG_DEBUG("Module Info : ");
-        LOG_DEBUG("Soft version: %s", info.swVersion);
-        LOG_DEBUG("Hard version: %s", info.hwVersion);
-        LOG_DEBUG("Extensions:%d", info.extensionNo);
-        for (int i = 0; i < info.extensionNo; i++) {
-            LOG_DEBUG("  %s", info.extension[i]);
+        LOG_DEBUG("Soft version: %s", ublox_info.swVersion);
+        LOG_DEBUG("Hard version: %s", ublox_info.hwVersion);
+        LOG_DEBUG("Extensions:%d", ublox_info.extensionNo);
+        for (int i = 0; i < ublox_info.extensionNo; i++) {
+            LOG_DEBUG("  %s", ublox_info.extension[i]);
         }
 
         memset(buffer, 0, sizeof(buffer));
 
         // tips: extensionNo field is 0 on some 6M GNSS modules
-        for (int i = 0; i < info.extensionNo; ++i) {
-            if (!strncmp(info.extension[i], "MOD=", 4)) {
-                strncpy((char *)buffer, &(info.extension[i][4]), sizeof(buffer));
-            } else if (!strncmp(info.extension[i], "PROTVER", 7)) {
+        for (int i = 0; i < ublox_info.extensionNo; ++i) {
+            if (!strncmp(ublox_info.extension[i], "MOD=", 4)) {
+                strncpy((char *)buffer, &(ublox_info.extension[i][4]), sizeof(buffer));
+            } else if (!strncmp(ublox_info.extension[i], "PROTVER", 7)) {
                 char *ptr = nullptr;
                 memset(buffer, 0, sizeof(buffer));
-                strncpy((char *)buffer, &(info.extension[i][8]), sizeof(buffer));
+                strncpy((char *)buffer, &(ublox_info.extension[i][8]), sizeof(buffer));
                 LOG_DEBUG("Protocol Version:%s", (char *)buffer);
                 if (strlen((char *)buffer)) {
-                    uBloxProtocolVersion = strtoul((char *)buffer, &ptr, 10);
-                    LOG_DEBUG("ProtVer=%d", uBloxProtocolVersion);
+                    ublox_info.protocol_version = strtoul((char *)buffer, &ptr, 10);
+                    LOG_DEBUG("ProtVer=%d", ublox_info.protocol_version);
                 } else {
-                    uBloxProtocolVersion = 0;
+                    ublox_info.protocol_version = 0;
                 }
             }
         }
-        if (strncmp(info.hwVersion, "00040007", 8) == 0) {
+        if (strncmp(ublox_info.hwVersion, "00040007", 8) == 0) {
             LOG_INFO(DETECTED_MESSAGE, "U-blox 6", "6");
             return GNSS_MODEL_UBLOX6;
-        } else if (strncmp(info.hwVersion, "00070000", 8) == 0) {
+        } else if (strncmp(ublox_info.hwVersion, "00070000", 8) == 0) {
             LOG_INFO(DETECTED_MESSAGE, "U-blox 7", "7");
             return GNSS_MODEL_UBLOX7;
-        } else if (strncmp(info.hwVersion, "00080000", 8) == 0) {
+        } else if (strncmp(ublox_info.hwVersion, "00080000", 8) == 0) {
             LOG_INFO(DETECTED_MESSAGE, "U-blox 8", "8");
             return GNSS_MODEL_UBLOX8;
-        } else if (strncmp(info.hwVersion, "00190000", 8) == 0) {
+        } else if (strncmp(ublox_info.hwVersion, "00190000", 8) == 0) {
             LOG_INFO(DETECTED_MESSAGE, "U-blox 9", "9");
             return GNSS_MODEL_UBLOX9;
-        } else if (strncmp(info.hwVersion, "000A0000", 8) == 0) {
+        } else if (strncmp(ublox_info.hwVersion, "000A0000", 8) == 0) {
             LOG_INFO(DETECTED_MESSAGE, "U-blox 10", "10");
             return GNSS_MODEL_UBLOX10;
         }

src/gps/GPS.h

@@ -16,13 +16,6 @@
 #define GPS_EN_ACTIVE 1
 #endif
 
-struct uBloxGnssModelInfo {
-    char swVersion[30];
-    char hwVersion[10];
-    uint8_t extensionNo;
-    char extension[10][30];
-};
-
 typedef enum {
     GNSS_MODEL_ATGM336H,
     GNSS_MODEL_MTK,
@@ -36,7 +29,8 @@ typedef enum {
     GNSS_MODEL_MTK_L76B,
     GNSS_MODEL_MTK_PA1616S,
     GNSS_MODEL_AG3335,
-    GNSS_MODEL_AG3352
+    GNSS_MODEL_AG3352,
+    GNSS_MODEL_LS20031
 } GnssModel_t;
 
 typedef enum {
@@ -54,9 +48,6 @@ enum GPSPowerState : uint8_t {
     GPS_OFF        // Powered off indefinitely
 };
 
-// Generate a string representation of DOP
-const char *getDOPString(uint32_t dop);
-
 /**
  * A gps class that only reads from the GPS periodically and keeps the gps powered down except when reading
  *
@@ -64,109 +55,7 @@ const char *getDOPString(uint32_t dop);
  */
 class GPS : private concurrency::OSThread
 {
-    TinyGPSPlus reader;
-    uint8_t fixQual = 0; // fix quality from GPGGA
-    uint32_t lastChecksumFailCount = 0;
-
-#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
-    // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field
-    // via optional feature "custom fields", currently disabled (bug #525)
-    TinyGPSCustom gsafixtype; // custom extract fix type from GPGSA
-    TinyGPSCustom gsapdop;    // custom extract PDOP from GPGSA
-    uint8_t fixType = 0;      // fix type from GPGSA
-#endif
-  private:
-#if GPS_BAUDRATE_FIXED
-    // if GPS_BAUDRATE is specified in variant, only try that.
-    const int serialSpeeds[1] = {GPS_BAUDRATE};
-    const int rareSerialSpeeds[1] = {GPS_BAUDRATE};
-#else
-    const int serialSpeeds[3] = {9600, 115200, 38400};
-    const int rareSerialSpeeds[3] = {4800, 57600, GPS_BAUDRATE};
-#endif
-
-    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
-    uint32_t rx_gpio = 0;
-    uint32_t tx_gpio = 0;
-
-    int speedSelect = 0;
-    int probeTries = 0;
-
-    /**
-     * hasValidLocation - indicates that the position variables contain a complete
-     *   GPS location, valid and fresh (< gps_update_interval + position_broadcast_secs)
-     */
-    bool hasValidLocation = false; // default to false, until we complete our first read
-
-    bool isInPowersave = false;
-
-    bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop()
-
-    bool hasGPS = false; // Do we have a GPS we are talking to
-
-    bool GPSInitFinished = false; // Init thread finished?
-    bool GPSInitStarted = false;  // Init thread finished?
-
-    GPSPowerState powerState = GPS_OFF; // GPS_ACTIVE if we want a location right now
-
-    uint8_t numSatellites = 0;
-
-    CallbackObserver<GPS, void *> notifyDeepSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
-
   public:
-    /** If !NULL we will use this serial port to construct our GPS */
-#if defined(ARCH_RP2040)
-    static SerialUART *_serial_gps;
-#else
-    static HardwareSerial *_serial_gps;
-#endif
-    static uint8_t _message_PMREQ[];
-    static uint8_t _message_PMREQ_10[];
-    static const uint8_t _message_CFG_RXM_PSM[];
-    static const uint8_t _message_CFG_RXM_ECO[];
-    static const uint8_t _message_CFG_PM2[];
-    static const uint8_t _message_GNSS_7[];
-    static const uint8_t _message_GNSS_8[];
-    static const uint8_t _message_JAM_6_7[];
-    static const uint8_t _message_JAM_8[];
-    static const uint8_t _message_NAVX5[];
-    static const uint8_t _message_NAVX5_8[];
-    static const uint8_t _message_NMEA[];
-    static const uint8_t _message_DISABLE_TXT_INFO[];
-    static const uint8_t _message_1HZ[];
-    static const uint8_t _message_GLL[];
-    static const uint8_t _message_GSA[];
-    static const uint8_t _message_GSV[];
-    static const uint8_t _message_VTG[];
-    static const uint8_t _message_RMC[];
-    static const uint8_t _message_AID[];
-    static const uint8_t _message_GGA[];
-    static const uint8_t _message_PMS[];
-    static const uint8_t _message_SAVE[];
-    static const uint8_t _message_SAVE_10[];
-
-    // VALSET Commands for M10
-    static const uint8_t _message_VALSET_PM[];
-    static const uint8_t _message_VALSET_PM_RAM[];
-    static const uint8_t _message_VALSET_PM_BBR[];
-    static const uint8_t _message_VALSET_ITFM_RAM[];
-    static const uint8_t _message_VALSET_ITFM_BBR[];
-    static const uint8_t _message_VALSET_DISABLE_NMEA_RAM[];
-    static const uint8_t _message_VALSET_DISABLE_NMEA_BBR[];
-    static const uint8_t _message_VALSET_DISABLE_TXT_INFO_RAM[];
-    static const uint8_t _message_VALSET_DISABLE_TXT_INFO_BBR[];
-    static const uint8_t _message_VALSET_ENABLE_NMEA_RAM[];
-    static const uint8_t _message_VALSET_ENABLE_NMEA_BBR[];
-    static const uint8_t _message_VALSET_DISABLE_SBAS_RAM[];
-    static const uint8_t _message_VALSET_DISABLE_SBAS_BBR[];
-
-    // CASIC commands for ATGM336H
-    static const uint8_t _message_CAS_CFG_RST_FACTORY[];
-    static const uint8_t _message_CAS_CFG_NAVX_CONF[];
-    static const uint8_t _message_CAS_CFG_RATE_1HZ[];
-
-    const char *ACK_SUCCESS_MESSAGE = "Get ack success!";
-
     meshtastic_Position p = meshtastic_Position_init_default;
 
     /** This is normally bound to config.position.gps_en_gpio but some rare boards (like heltec tracker) need more advanced
@@ -176,8 +65,6 @@ class GPS : private concurrency::OSThread
      */
     GpioVirtPin *enablePin = NULL;
 
-    GPS() : concurrency::OSThread("GPS") {}
-
     virtual ~GPS();
 
     /** We will notify this observable anytime GPS state has changed meaningfully */
@@ -214,21 +101,6 @@ class GPS : private concurrency::OSThread
     // Empty the input buffer as quickly as possible
     void clearBuffer();
 
-    // Create a ublox packet for editing in memory
-    uint8_t makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
-    uint8_t makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
-
-    // scratch space for creating ublox packets
-    uint8_t UBXscratch[250] = {0};
-
-    int rebootsSeen = 0;
-
-    int getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID, uint32_t waitMillis);
-    GPS_RESPONSE getACK(uint8_t c, uint8_t i, uint32_t waitMillis);
-    GPS_RESPONSE getACK(const char *message, uint32_t waitMillis);
-
-    GPS_RESPONSE getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis);
-
     virtual bool factoryReset();
 
     // Creates an instance of the GPS class.
@@ -241,20 +113,8 @@ class GPS : private concurrency::OSThread
     // Let the GPS hardware save power between updates
     void down();
 
-  protected:
-    /**
-     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
-     * Override this method to check for new locations
-     *
-     * @return true if we've acquired a time
-     */
-
-    /**
-     * Perform any processing that should be done only while the GPS is awake and looking for a fix.
-     * Override this method to check for new locations
-     *
-     * @return true if we've acquired a new location
-     */
+  private:
+    GPS() : concurrency::OSThread("GPS") {}
 
     /// Record that we have a GPS
     void setConnected();
@@ -281,15 +141,74 @@ class GPS : private concurrency::OSThread
      */
     virtual bool lookForLocation();
 
-  private:
+    GnssModel_t gnssModel = GNSS_MODEL_UNKNOWN;
+
+    TinyGPSPlus reader;
+    uint8_t fixQual = 0; // fix quality from GPGGA
+    uint32_t lastChecksumFailCount = 0;
+
+#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS
+    // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field
+    // via optional feature "custom fields", currently disabled (bug #525)
+    TinyGPSCustom gsafixtype; // custom extract fix type from GPGSA
+    TinyGPSCustom gsapdop;    // custom extract PDOP from GPGSA
+    uint8_t fixType = 0;      // fix type from GPGSA
+#endif
+
+    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
+    uint32_t rx_gpio = 0;
+    uint32_t tx_gpio = 0;
+
+    uint8_t speedSelect = 0;
+    uint8_t probeTries = 0;
+
+    /**
+     * hasValidLocation - indicates that the position variables contain a complete
+     *   GPS location, valid and fresh (< gps_update_interval + position_broadcast_secs)
+     */
+    bool hasValidLocation = false; // default to false, until we complete our first read
+
+    bool isInPowersave = false;
+
+    bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop()
+
+    bool hasGPS = false; // Do we have a GPS we are talking to
+
+    bool GPSInitFinished = false; // Init thread finished?
+    bool GPSInitStarted = false;  // Init thread finished?
+
+    GPSPowerState powerState = GPS_OFF; // GPS_ACTIVE if we want a location right now
+
+    uint8_t numSatellites = 0;
+
+    CallbackObserver<GPS, void *> notifyDeepSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
+
+    /** If !NULL we will use this serial port to construct our GPS */
+#if defined(ARCH_RP2040)
+    static SerialUART *_serial_gps;
+#else
+    static HardwareSerial *_serial_gps;
+#endif
+
+    // Create a ublox packet for editing in memory
+    uint8_t makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
+    uint8_t makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
+
+    // scratch space for creating ublox packets
+    uint8_t UBXscratch[250] = {0};
+
+    int rebootsSeen = 0;
+
+    int getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID, uint32_t waitMillis);
+    GPS_RESPONSE getACK(uint8_t c, uint8_t i, uint32_t waitMillis);
+    GPS_RESPONSE getACK(const char *message, uint32_t waitMillis);
+
+    GPS_RESPONSE getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis);
+
     /// Prepare the GPS for the cpu entering deep sleep, expect to be gone for at least 100s of msecs
     /// always returns 0 to indicate okay to sleep
     int prepareDeepSleep(void *unused);
 
-    // Calculate checksum
-    void UBXChecksum(uint8_t *message, size_t length);
-    void CASChecksum(uint8_t *message, size_t length);
-
     /** Set power with EN pin, if relevant
      */
     void writePinEN(bool on);
@@ -318,12 +237,7 @@ class GPS : private concurrency::OSThread
 
     // delay counter to allow more sats before fixed position stops GPS thread
     uint8_t fixeddelayCtr = 0;
-
-    const char *powerStateToString();
-
-  protected:
-    GnssModel_t gnssModel = GNSS_MODEL_UNKNOWN;
 };
 
 extern GPS *gps;
-#endif // Exclude GPS
+#endif // Exclude GPS