WIP

.devcontainer/devcontainer.json

@@ -13,13 +13,16 @@
   },
   "customizations": {
     "vscode": {
-      "extensions": ["ms-vscode.cpptools", "platformio.platformio-ide"]
+      "extensions": [
+        "ms-vscode.cpptools",
+        "platformio.platformio-ide",
+      ]
     }
   },
 
   // Use 'forwardPorts' to make a list of ports inside the container available locally.
-  "forwardPorts": [4403],
+  "forwardPorts": [ 4403 ],
 
   // Run commands to prepare the container for use
-  "postCreateCommand": ".devcontainer/setup.sh"
+  "postCreateCommand": ".devcontainer/setup.sh",
 }

.devcontainer/setup.sh

@@ -1,3 +1,3 @@
 #!/usr/bin/env sh
 
-git submodule update --init
+git submodule update --init

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -49,24 +49,10 @@ body:
         - Heltec V3
         - Heltec Wireless Paper
         - Heltec Wireless Tracker
-        - Heltec Mesh Node T114
-        - Heltec Vision Master E213
-        - Heltec Vision Master E290
-        - Heltec Vision Master T190
-        - Nano G1
-        - Nano G1 Explorer
-        - Nano G2 Ultra
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
         - Seeed Wio Tracker 1110
-        - Seeed Card Tracker T1000-E
-        - Station G1
-        - Station G2
-        - unPhone
-        - CanaryOne
-        - Chatter
-        - Linux Native
         - DIY
         - Other
     validations:

.github/ISSUE_TEMPLATE/feature.yml

@@ -18,7 +18,6 @@ body:
         - ESP32
         - RP2040
         - Linux Native
-        - Cross-Platform
         - other
     validations:
       required: true

.github/actions/build-variant/action.yml

@@ -1,94 +0,0 @@
-name: Setup Build Variant Composite Action
-description: Variant build actions for Meshtastic Platform IO steps
-
-inputs:
-  board:
-    description: The board to build for
-    required: true
-  github_token:
-    description: GitHub token
-    required: true
-  build-script-path:
-    description: Path to the build script
-    required: true
-  remove-debug-flags:
-    description: A space separated list of files to remove debug flags from
-    required: false
-    default: ""
-  ota-firmware-source:
-    description: The OTA firmware file to pull
-    required: false
-    default: ""
-  ota-firmware-target:
-    description: The target path to store the OTA firmware file
-    required: false
-    default: ""
-  artifact-paths:
-    description: A newline separated list of paths to store as artifacts
-    required: false
-    default: ""
-  include-web-ui:
-    description: Include the web UI in the build
-    required: false
-    default: "false"
-  arch:
-    description: Processor arch name
-    required: true
-    default: "esp32"
-
-runs:
-  using: composite
-  steps:
-    - name: Build base
-      id: base
-      uses: ./.github/actions/setup-base
-
-    - name: Pull web ui
-      if: inputs.include-web-ui == 'true'
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/web
-        file: build.tar
-        target: build.tar
-        token: ${{ inputs.github_token }}
-
-    - name: Unpack web ui
-      if: inputs.include-web-ui == 'true'
-      shell: bash
-      run: |
-        tar -xf build.tar -C data/static
-        rm build.tar
-
-    - name: Remove debug flags for release
-      shell: bash
-      if: inputs.remove-debug-flags != ''
-      run: |
-        for INI_FILE in ${{ inputs.remove-debug-flags }}; do
-          sed -i '/DDEBUG_HEAP/d' ${INI_FILE}
-        done
-
-    - name: Build ${{ inputs.board }}
-      shell: bash
-      run: ${{ inputs.build-script-path }} ${{ inputs.board }}
-
-    - name: Pull OTA Firmware
-      if: inputs.ota-firmware-source != '' &&  inputs.ota-firmware-target != ''
-      uses: dsaltares/fetch-gh-release-asset@master
-      with:
-        repo: meshtastic/firmware-ota
-        file: ${{ inputs.ota-firmware-source }}
-        target: ${{ inputs.ota-firmware-target }}
-        token: ${{ inputs.github_token }}
-
-    - name: Get release version string
-      shell: bash
-      run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-      id: version
-
-    - name: Store binaries as an artifact
-      uses: actions/upload-artifact@v4
-      with:
-        name: firmware-${{ inputs.arch }}-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
-        overwrite: true
-        path: |
-          ${{ inputs.artifact-paths }}

.github/actions/setup-base/action.yml

@@ -11,11 +11,6 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Uncomment build epoch
-      shell: bash
-      run: |
-        sed -i 's/#-DBUILD_EPOCH=$UNIX_TIME/-DBUILD_EPOCH=$UNIX_TIME/' platformio.ini
-
     - name: Install dependencies
       shell: bash
       run: |

.github/dependabot.yml

@@ -1,26 +0,0 @@
-version: 2
-updates:
-  - package-ecosystem: docker
-    directory: devcontainer
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: docker
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: gitsubmodule
-    directory: /
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific
-  - package-ecosystem: github-actions
-    directory: /.github/workflows
-    schedule:
-      interval: daily
-      time: "05:00" # trunk-ignore(yamllint/quoted-strings): required by dependabot syntax check
-      timezone: US/Pacific

.github/workflows/build_esp32.yml

@@ -12,23 +12,52 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
-        id: build
-        uses: ./.github/actions/build-variant
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware.bin
-          ota-firmware-target: release/bleota.bin
-          artifact-paths: |
+          repo: meshtastic/firmware-ota
+          file: firmware.bin
+          target: release/bleota.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32

.github/workflows/build_esp32_c3.yml

@@ -14,22 +14,50 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-C3
-        id: build
-        uses: ./.github/actions/build-variant
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-c3.bin
+          target: release/bleota-c3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          arch: esp32c3

.github/workflows/build_esp32_c6.yml

@@ -1,36 +0,0 @@
-name: Build ESP32-C6
-
-on:
-  workflow_call:
-    inputs:
-      board:
-        required: true
-        type: string
-
-permissions: read-all
-
-jobs:
-  build-esp32-c6:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Build ESP32-C6
-        id: build
-        uses: ./.github/actions/build-variant
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-            ./arch/esp32/esp32c6.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-c3.bin
-          ota-firmware-target: release/bleota-c3.bin
-          artifact-paths: |
-            release/*.bin
-            release/*.elf
-          arch: esp32c6

.github/workflows/build_esp32_s3.yml

@@ -12,23 +12,50 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build ESP32-S3
-        id: build
-        uses: ./.github/actions/build-variant
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          remove-debug-flags: >-
-            ./arch/esp32/esp32.ini
-            ./arch/esp32/esp32s2.ini
-            ./arch/esp32/esp32s3.ini
-            ./arch/esp32/esp32c3.ini
-          build-script-path: bin/build-esp32.sh
-          ota-firmware-source: firmware-s3.bin
-          ota-firmware-target: release/bleota-s3.bin
-          artifact-paths: |
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-s3.bin
+          target: release/bleota-s3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.bin
             release/*.elf
-          include-web-ui: true
-          arch: esp32s3

.github/workflows/build_native.yml

@@ -67,7 +67,7 @@ jobs:
       - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v6
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./Dockerfile
@@ -77,7 +77,7 @@ jobs:
       - name: Docker build and push
         if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
         continue-on-error: true # FIXME: Failing docker login auth
-        uses: docker/build-push-action@v6
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./Dockerfile

.github/workflows/build_nrf52.yml

@@ -12,17 +12,24 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build NRF52
-        id: build
-        uses: ./.github/actions/build-variant
+        run: bin/build-nrf52.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-nrf52.sh
-          artifact-paths: |
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.hex
             release/*.uf2
             release/*.elf
             release/*.zip
-          arch: nrf52840

.github/workflows/build_rpi2040.yml

@@ -12,15 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
       - name: Build Raspberry Pi 2040
-        id: build
-        uses: ./.github/actions/build-variant
+        run: ./bin/build-rpi2040.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-rpi2040.sh
-          artifact-paths: |
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.uf2
             release/*.elf
-          arch: rp2040

.github/workflows/build_stm32.yml

@@ -12,16 +12,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
 
-      - name: Build STM32WL
-        id: build
-        uses: ./.github/actions/build-variant
+      - name: Build STM32
+        run: bin/build-stm32.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
         with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          board: ${{ inputs.board }}
-          build-script-path: bin/build-stm32.sh
-          artifact-paths: |
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
             release/*.hex
             release/*.bin
-            release/*.elf
-          arch: stm32

.github/workflows/generate-userprefs.yml

@@ -1,35 +0,0 @@
-name: Generate UsersPrefs JSON manifest
-
-on:
-  push:
-    paths:
-      - userPrefs.h
-    branches:
-      - master
-
-jobs:
-  generate-userprefs:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-
-      - name: Install Clang
-        run: sudo apt-get install -y clang
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Generate userPrefs.jsom
-        run: python3 ./bin/build-userprefs-json.py
-
-      - name: Trunk format json
-        run: trunk format userPrefs.json
-
-      - name: Commit userPrefs.json
-        run: |
-          git config --global user.email "actions@github.com"
-          git config --global user.name "GitHub Actions"
-          git add userPrefs.json
-          git commit -m "Update userPrefs.json"
-          git push

.github/workflows/main_matrix.yml

@@ -1,7 +1,7 @@
 name: CI
-concurrency:
-  group: ci-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
+#concurrency:
+#  group: ${{ github.ref }}
+#  cancel-in-progress: ${{ github.ref != 'refs/heads/master' }}
 on:
   # # Triggers the workflow on push but only for the master branch
   push:
@@ -24,7 +24,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32, check]
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, stm32, check]
     runs-on: ubuntu-latest
     steps:
       - id: checkout
@@ -32,18 +32,13 @@ jobs:
         name: Checkout base
       - id: jsonStep
         run: |
-          if [[ "${{ github.head_ref }}" == "" ]]; then
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
-          else  
-            TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
-          fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} Head: ${{ github.head_ref }} Ref: ${{ github.ref }} Targets: $TARGETS"
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          echo "$TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}
       esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
       esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
-      esp32c6: ${{ steps.jsonStep.outputs.esp32c6 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
       stm32: ${{ steps.jsonStep.outputs.stm32 }}
@@ -56,7 +51,6 @@ jobs:
       matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     steps:
       - uses: actions/checkout@v4
       - name: Build base
@@ -92,15 +86,6 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
-  build-esp32-c6:
-    needs: setup
-    strategy:
-      fail-fast: false
-      matrix: ${{ fromJson(needs.setup.outputs.esp32c6) }}
-    uses: ./.github/workflows/build_esp32_c6.yml
-    with:
-      board: ${{ matrix.board }}
-
   build-nrf52:
     needs: setup
     strategy:
@@ -139,7 +124,6 @@ jobs:
 
   after-checks:
     runs-on: ubuntu-latest
-    if: ${{ github.event_name != 'workflow_dispatch' }}
     needs: [check]
     steps:
       - name: Checkout code
@@ -152,20 +136,18 @@ jobs:
     permissions:
       contents: write
       pull-requests: write
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
     runs-on: ubuntu-latest
     needs:
       [
         build-esp32,
         build-esp32-s3,
         build-esp32-c3,
-        build-esp32-c6,
         build-nrf52,
         build-rpi2040,
         build-stm32,
+        package-raspbian,
+        package-raspbian-armv7l,
+        package-native,
       ]
     steps:
       - name: Checkout code
@@ -177,7 +159,6 @@ jobs:
       - uses: actions/download-artifact@v4
         with:
           path: ./
-          pattern: firmware-${{matrix.arch}}-*
           merge-multiple: true
 
       - name: Display structure of downloaded files
@@ -188,12 +169,12 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./bin/device-*.sh ./bin/device-*.bat
+        run: mv -b -t ./ ./release/meshtasticd_linux_* ./bin/config-dist.yaml ./bin/device-*.sh ./bin/device-*.bat
 
       - name: Repackage in single firmware zip
         uses: actions/upload-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{ steps.version.outputs.version }}
           overwrite: true
           path: |
             ./firmware-*.bin
@@ -202,14 +183,16 @@ jobs:
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
+            ./meshtasticd_linux_*
+            ./config-dist.yaml
             ./littlefs-*.bin
             ./bleota*bin
             ./Meshtastic_nRF52_factory_erase*.uf2
-          retention-days: 30
+          retention-days: 90
 
       - uses: actions/download-artifact@v4
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
+          name: firmware-${{ steps.version.outputs.version }}
           merge-multiple: true
           path: ./output
 
@@ -223,35 +206,32 @@ jobs:
           chmod +x ./output/device-update.sh
 
       - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
         uses: actions/upload-artifact@v4
         with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: ./*.elf
           retention-days: 30
 
-      - uses: scruplelesswizard/comment-artifact@main
-        if: ${{ github.event_name == 'pull_request' }}
+      - name: Create request artifacts
+        continue-on-error: true # FIXME: Why are we getting 502, but things still work?
+        if: ${{ github.event_name == 'pull_request_target' || github.event_name == 'pull_request' }}
+        uses: gavv/pull-request-artifacts@v2.1.0
         with:
-          name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
-          description: "Download firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip. This artifact will be available for 90 days from creation"
-          github-token: ${{ secrets.GITHUB_TOKEN }}
+          commit: ${{ (github.event.pull_request_target || github.event.pull_request).head.sha }}
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts-token: ${{ secrets.ARTIFACTS_TOKEN }}
+          artifacts-repo: meshtastic/artifacts
+          artifacts-branch: device
+          artifacts: ./firmware-${{ steps.version.outputs.version }}.zip
 
   release-artifacts:
     runs-on: ubuntu-latest
     if: ${{ github.event_name == 'workflow_dispatch' }}
-    outputs:
-      upload_url: ${{ steps.create_release.outputs.upload_url }}
-    needs:
-      [
-        gather-artifacts,
-        package-raspbian,
-        package-raspbian-armv7l,
-        package-native,
-      ]
+    needs: [gather-artifacts, after-checks]
     steps:
       - name: Checkout
         uses: actions/checkout@v4
@@ -265,6 +245,42 @@ jobs:
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
+      - uses: actions/download-artifact@v4
+        with:
+          name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
+          path: ./output
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: Device scripts permissions
+        run: |
+          chmod +x ./output/device-install.sh
+          chmod +x ./output/device-update.sh
+
+      - name: Zip firmware
+        run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output -x *.deb
+
+      - uses: actions/download-artifact@v4
+        with:
+          name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+          path: ./elfs
+
+      - name: Zip Elfs
+        run: zip -j -9 -r ./debug-elfs-${{ steps.version.outputs.version }}.zip ./elfs
+
+      # For diagnostics
+      - name: Show artifacts
+        run: ls -lR
+
       - name: Create release
         uses: actions/create-release@v1
         id: create_release
@@ -278,16 +294,25 @@ jobs:
         env:
           GITHUB_TOKEN: ${{ github.token }}
 
-      - name: Download deb files
-        uses: actions/download-artifact@v4
+      - name: Add bins to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
         with:
-          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
-          merge-multiple: true
-          path: ./output
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./firmware-${{ steps.version.outputs.version }}.zip
+          asset_name: firmware-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
 
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
+      - name: Add debug elfs to release
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          asset_content_type: application/zip
 
       - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
@@ -324,79 +349,7 @@ jobs:
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v6
         with:
-          title: Bump version.properties
           add-paths: |
             version.properties
-
-  release-firmware:
-    strategy:
-      fail-fast: false
-      matrix:
-        arch: [esp32, esp32s3, esp32c3, esp32c6, nrf52840, rp2040, stm32]
-    runs-on: ubuntu-latest
-    if: ${{ github.event_name == 'workflow_dispatch' }}
-    needs: [release-artifacts]
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: 3.x
-
-      - name: Get release version string
-        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
-        id: version
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}
-          merge-multiple: true
-          path: ./output
-
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Device scripts permissions
-        run: |
-          chmod +x ./output/device-install.sh
-          chmod +x ./output/device-update.sh
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./output
-
-      - uses: actions/download-artifact@v4
-        with:
-          name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          merge-multiple: true
-          path: ./elfs
-
-      - name: Zip firmware
-        run: zip -j -9 -r ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip ./elfs
-
-      # For diagnostics
-      - name: Display structure of downloaded files
-        run: ls -lR
-
-      - name: Add bins to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: firmware-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip
-
-      - name: Add debug elfs to release
-        uses: actions/upload-release-asset@v1
-        env:
-          GITHUB_TOKEN: ${{ github.token }}
-        with:
-          upload_url: ${{needs.release-artifacts.outputs.upload_url}}
-          asset_path: ./debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_name: debug-elfs-${{matrix.arch}}-${{ steps.version.outputs.version }}.zip
-          asset_content_type: application/zip

.github/workflows/package_amd64.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_native.yml
 
   package-native:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-native
     steps:
       - name: Checkout code
@@ -50,14 +50,11 @@ jobs:
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
           tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
           gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles

.github/workflows/package_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian.yml
 
   package-raspbian:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian
     steps:
       - name: Checkout code
@@ -50,14 +50,11 @@ jobs:
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
           tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
           gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles

.github/workflows/package_raspbian_armv7l.yml

@@ -13,7 +13,7 @@ jobs:
     uses: ./.github/workflows/build_raspbian_armv7l.yml
 
   package-raspbian_armv7l:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     needs: build-raspbian_armv7l
     steps:
       - name: Checkout code
@@ -50,14 +50,11 @@ jobs:
           mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
-          mkdir -p .debpkg/etc/meshtasticd/config.d
-          mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
           tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
           gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
           cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
-          cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles

.github/workflows/sec_sast_semgrep_cron.yml

@@ -12,7 +12,7 @@ jobs:
   semgrep-full:
     runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/sec_sast_semgrep_pull.yml

@@ -4,9 +4,9 @@ on: pull_request
 
 jobs:
   semgrep-diff:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     container:
-      image: semgrep/semgrep
+      image: returntocorp/semgrep
 
     steps:
       # step 1

.github/workflows/stale_bot.yml

@@ -1,21 +0,0 @@
-name: process stale Issues and PR's
-on:
-  schedule:
-    - cron: 0 6 * * *
-  workflow_dispatch: {}
-
-permissions:
-  issues: write
-  pull-requests: write
-
-jobs:
-  stale_issues:
-    name: Close Stale Issues
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Stale PR+Issues
-        uses: actions/stale@v9.0.0
-        with:
-          exempt-issue-labels: pinned,3.0
-          exempt-pr-labels: pinned,3.0

.github/workflows/tests.yml

@@ -57,50 +57,35 @@ jobs:
           reporter: java-junit
 
   hardware-tests:
-    runs-on: test-runner
+    runs-on: ubuntu-latest
     steps:
       - name: Checkout code
         uses: actions/checkout@v4
 
-      # - uses: actions/setup-python@v5
-      #   with:
-      #     python-version: '3.10'
-
-      # pipx install "setuptools<72"
       - name: Upgrade python tools
         shell: bash
         run: |
-          pipx install adafruit-nrfutil
-          pipx install poetry
-          pipx install meshtastic --pip-args=--pre
-
-      - name: Install PlatformIO from script
-        shell: bash
-        run: |
-          curl -fsSL -o get-platformio.py https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py
-          python3 get-platformio.py
+          python -m pip install --upgrade pip
+          pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
+          pip install -U platformio adafruit-nrfutil --no-build-isolation
+          pip install -U poetry --no-build-isolation
+          pip install -U meshtastic --pre --no-build-isolation
 
       - name: Upgrade platformio
         shell: bash
         run: |
-          export PATH=$PATH:$HOME/.local/bin
           pio upgrade
 
-      - name: Setup Node
-        uses: actions/setup-node@v4
-        with:
-          node-version: 18
-
       - name: Setup pnpm
-        uses: pnpm/action-setup@v4
+        uses: pnpm/action-setup@v2
         with:
           version: latest
 
-      - name: Install dependencies, setup devices and run
-        shell: bash
-        run: |
-          git submodule update --init --recursive
-          cd meshtestic/
-          pnpm install
-          pnpm run setup
-          pnpm run test
+      - name: Install Dependencies
+        run: pnpm install
+
+      - name: Setup devices
+        run: pnpm run setup
+
+      - name: Execute end to end tests on connected hardware
+        run: pnpm run test

.github/workflows/trunk_format_pr.yml

@@ -1,43 +0,0 @@
-name: Run Trunk Fmt on PR Comment
-
-on:
-  issue_comment:
-    types: [created]
-
-jobs:
-  trunk-fmt:
-    if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt')
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          ref: ${{github.event.pull_request.head.ref}}
-          repository: ${{github.event.pull_request.head.repo.full_name}}
-
-      - name: Install trunk
-        run: curl https://get.trunk.io -fsSL | bash
-
-      - name: Run Trunk Fmt
-        run: trunk fmt
-
-      - name: Commit and push changes
-        run: |
-          git config --global user.name "github-actions[bot]"
-          git config --global user.email "github-actions[bot]@users.noreply.github.com"
-          git add .
-          git commit -m "Add firmware version ${{ steps.version.outputs.version }}"
-          git push
-
-      - name: Comment on PR
-        uses: actions/github-script@v7
-        with:
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-          script: |
-            github.issues.createComment({
-              issue_number: context.issue.number,
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              body: '`trunk fmt` has been run on this PR.'
-            })

.github/workflows/update_protobufs.yml

@@ -1,4 +1,4 @@
-name: Update protobufs and regenerate classes
+name: "Update protobufs and regenerate classes"
 on: workflow_dispatch
 
 jobs:
@@ -17,18 +17,17 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.9-linux-x86.tar.gz
-          mv nanopb-0.4.9-linux-x86 nanopb-0.4.9
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
 
       - name: Re-generate protocol buffers
         run: |
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v7
+        uses: peter-evans/create-pull-request@v6
         with:
-          title: Update protobufs and classes
           add-paths: |
             protobufs
             src/mesh

.gitignore

@@ -1,4 +1,6 @@
 .pio
+main/configuration.h
+main/credentials.h
 
 # ignore vscode IDE settings files
 .vscode/*
@@ -30,4 +32,4 @@ release/
 .vscode/extensions.json
 /compile_commands.json
 src/mesh/raspihttp/certificate.pem
-src/mesh/raspihttp/private_key.pem
+src/mesh/raspihttp/private_key.pem

.trunk/trunk.yaml

@@ -1,34 +1,34 @@
 version: 0.1
 cli:
-  version: 1.22.7
+  version: 1.22.3
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.4
+      ref: v1.6.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.83.2
+    - trufflehog@3.81.9
     - yamllint@1.35.1
-    - bandit@1.7.10
-    - checkov@3.2.276
-    - terrascan@1.19.9
-    - trivy@0.56.2
+    - bandit@1.7.9
+    - checkov@3.2.238
+    - terrascan@1.19.1
+    - trivy@0.54.1
     #- trufflehog@3.63.2-rc0
     - taplo@0.9.3
-    - ruff@0.7.1
+    - ruff@0.6.2
     - isort@5.13.2
-    - markdownlint@0.42.0
+    - markdownlint@0.41.0
     - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.3
+    - actionlint@1.7.1
     - flake8@7.1.1
     - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.10.0
+    - black@24.8.0
     - git-diff-check
-    - gitleaks@8.21.1
+    - gitleaks@8.18.4
     - clang-format@16.0.3
     - prettier@3.3.3
   ignore:

CODE_OF_CONDUCT.md

@@ -1,4 +0,0 @@
-# Contributor Covenant Code of Conduct
-
-The Meshtastic Firmware project is subject to the code of conduct for the parent project, which can be found here: 
-https://meshtastic.org/docs/legal/conduct/

SECURITY.md

@@ -1,12 +0,0 @@
-# Security Policy
-
-## Supported Versions
-
-| Firmware Version | Supported          |
-| ---------------- | ------------------ |
-| 2.5.x            | :white_check_mark: |
-| <= 2.4.x         | :x:                |
-
-## Reporting a Vulnerability
-
-We support the private reporting of potential security vulnerabilities. Please go to the Security tab to file a report with a description of the potential vulnerability and reproduction scripts (preferred) or steps, and our developers will review.

arch/esp32/esp32.ini

@@ -2,10 +2,10 @@
 [esp32_base]
 extends = arduino_base
 custom_esp32_kind = esp32
-platform = platformio/espressif32@6.9.0
+platform = platformio/espressif32@6.7.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -31,7 +31,7 @@ build_flags =
   -DCONFIG_BT_NIMBLE_ENABLED
   -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
   -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120
   -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
   -DSERIAL_BUFFER_SIZE=4096
   -DLIBPAX_ARDUINO
@@ -46,7 +46,7 @@ lib_deps =
   https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2
   h2zero/NimBLE-Arduino@^1.4.2
   https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
-  lewisxhe/XPowersLib@^0.2.6
+  https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
   rweather/Crypto@^0.4.0
 

arch/esp32/esp32c6.ini

@@ -1,40 +0,0 @@
-[esp32c6_base]
-extends = esp32_base
-platform = https://github.com/Jason2866/platform-espressif32.git#22faa566df8c789000f8136cd8d0aca49617af55
-build_flags =
-  ${arduino_base.build_flags}
-  -Wall
-  -Wextra
-  -Isrc/platform/esp32
-  -std=c++11
-  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-  -DSERIAL_BUFFER_SIZE=4096
-  -DLIBPAX_ARDUINO
-  -DLIBPAX_WIFI
-  -DLIBPAX_BLE
-  -DMESHTASTIC_EXCLUDE_WEBSERVER
-  ;-DDEBUG_HEAP
-  ; TEMP
-  -DHAS_BLUETOOTH=0
-  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
-  -DMESHTASTIC_EXCLUDE_BLUETOOTH
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${networking_base.lib_deps}
-  ${environmental_base.lib_deps}
-  lewisxhe/XPowersLib@^0.2.6
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  rweather/Crypto@^0.4.0
-
-build_src_filter = 
- ${esp32_base.build_src_filter} -<mesh/http> 
-
-monitor_speed = 460800
-monitor_filters = esp32_c3_exception_decoder
-
-lib_ignore =
-  NonBlockingRTTTL
-  NimBLE-Arduino
-  libpax
-  

arch/nrf52/nrf52.ini

@@ -16,12 +16,11 @@ build_flags =
   -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}
   rweather/Crypto@^0.4.0
 
 lib_ignore =
-  BluetoothOTA
-  lvgl
+  BluetoothOTA

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#6b3796d697481c8f6e3f4aa5c111bd9979f29e64
+platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
 framework = arduino
 
 build_src_filter = 
@@ -9,7 +9,7 @@ build_src_filter =
   -<nimble/> 
   -<platform/nrf52/> 
   -<platform/stm32wl/> 
-  -<platform/rp2xx0>
+  -<platform/rp2040>
   -<mesh/wifi/>
   -<mesh/http/>
   +<mesh/raspihttp/>
@@ -24,7 +24,7 @@ lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
-  https://github.com/lovyan03/LovyanGFX.git#1401c28a47646fe00538d487adcb2eb3c72de805
+  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
 
 build_flags =
   ${arduino_base.build_flags}

arch/rp2040/rp2040.ini

@@ -1,14 +1,14 @@
 ; Common settings for rp2040 Processor based targets
-[rp2350_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9e55f6db5c56b9867c69fe473f388beea4546672
+[rp2040_base]
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#a6ab6e1f95bc1428d667d55ea7173c0744acc03c ; 4.0.2+
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
 build_flags = 
   ${arduino_base.build_flags} -Wno-unused-variable 
-  -Isrc/platform/rp2xx0
+  -Isrc/platform/rp2040
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
@@ -16,9 +16,8 @@ build_src_filter =
 
 lib_ignore =
   BluetoothOTA
-  lvgl
 
 lib_deps =
   ${arduino_base.lib_deps}
   ${environmental_base.lib_deps}
-  rweather/Crypto
+  rweather/Crypto

arch/rp2xx0/rp2040.ini

@@ -1,25 +0,0 @@
-; Common settings for rp2040 Processor based targets
-[rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#v1.2.0-gcc12
-extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.0.3
-
-board_build.core = earlephilhower
-board_build.filesystem_size = 0.5m
-build_flags = 
-  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
-  -Isrc/platform/rp2xx0
-  -Isrc/platform/rp2xx0/hardware_rosc/include
-  -Isrc/platform/rp2xx0/pico_sleep/include
-  -D__PLAT_RP2040__
-#  -D _POSIX_THREADS
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
-
-lib_ignore =
-  BluetoothOTA
-
-lib_deps =
-  ${arduino_base.lib_deps}
-  ${environmental_base.lib_deps}
-  rweather/Crypto

arch/stm32/stm32.ini

@@ -1,7 +1,7 @@
 [stm32_base]
 extends = arduino_base
 platform = ststm32
-platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#ea74156acd823b6d14739f389e6cdc648f8ee36e
+platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#361a7fdb67e2a7104e99b4f42a802469eef8b129
 
 build_type = release
 
@@ -22,7 +22,7 @@ build_flags =
   -fdata-sections
   
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink
@@ -33,5 +33,5 @@ lib_deps =
   https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
 
 lib_ignore =
-  mathertel/OneButton@~2.6.1
+  https://github.com/mathertel/OneButton@~2.6.1
   Wire

bin/build-userprefs-json.py

@@ -1,48 +0,0 @@
-import json
-import subprocess
-import re
-
-def get_macros_from_header(header_file):
-    # Run clang to preprocess the header file and capture the output
-    result = subprocess.run(['clang', '-E', '-dM', header_file], capture_output=True, text=True)
-    if result.returncode != 0:
-        raise RuntimeError(f"Clang preprocessing failed: {result.stderr}")
-
-    # Extract macros from the output
-    macros = {}
-    macro_pattern = re.compile(r'#define\s+(\w+)\s+(.*)')
-    for line in result.stdout.splitlines():
-        match = macro_pattern.match(line) 
-        if match and 'USERPREFS_' in line and '_USERPREFS_' not in line:
-            macros[match.group(1)] = match.group(2)
-
-    return macros
-
-def write_macros_to_json(macros, output_file):
-    with open(output_file, 'w') as f:
-        json.dump(macros, f, indent=4)
-
-def main():
-    header_file = 'userPrefs.h'
-    output_file = 'userPrefs.json'
-    # Uncomment all macros in the header file
-    with open(header_file, 'r') as file:
-        lines = file.readlines()
-
-    uncommented_lines = []
-    for line in lines:
-        stripped_line = line.strip().replace('/*', '').replace('*/', '')
-        if stripped_line.startswith('//') and 'USERPREFS_' in stripped_line:
-            # Replace "//"
-            stripped_line = stripped_line.replace('//', '')
-        uncommented_lines.append(stripped_line + '\n')
-
-    with open(header_file, 'w') as file:
-        for line in uncommented_lines:
-                file.write(line)
-    macros = get_macros_from_header(header_file)
-    write_macros_to_json(macros, output_file)
-    print(f"Macros have been written to {output_file}")
-
-if __name__ == "__main__":
-    main()

bin/config-dist.yaml

@@ -1,11 +1,14 @@
-### Many device configs have been moved to /etc/meshtasticd/available.d
-### To activate, simply copy or link the appropriate file into /etc/meshtasticd/config.d
-
 ### Define your devices here using Broadcom pin numbering
 ### Uncomment the block that corresponds to your hardware
 ### Including the "Module:" line!
 ---
 Lora:
+#  Module: sx1262  # Waveshare SX126X XXXM
+#  DIO2_AS_RF_SWITCH: true
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
 
 #  Module: sx1262  # Waveshare SX1302 LISTEN ONLY AT THIS TIME!
 #  CS: 7
@@ -16,7 +19,6 @@ Lora:
 #  CS: 0
 #  IRQ: 10
 #  Busy: 11
-#  DIO2_AS_RF_SWITCH: true
 #  spidev: spidev0.1
 
 #  Module: RF95  # Adafruit RFM9x
@@ -111,29 +113,6 @@ Display:
 #  Height: 320
 #  Rotate: true
 
-### SHCHV 3.5 RPi TFT+Touchscreen
-#  Panel: ILI9486
-#  spidev: spidev0.0
-#  BusFrequency: 30000000
-#  DC: 24
-#  Reset: 25
-#  Width: 320
-#  Height: 480
-#  OffsetRotate: 2
-
-### TZT 2.0 Inch TFT Display ST7789V 240RGBx320
-#  Panel: ST7789
-#  spidev: spidev0.0
-#  # CS: 8     # can be freely chosen
-#  BusFrequency: 80000000
-#  DC: 24      # can be freely chosen
-#  Width: 320
-#  Height: 240
-#  Reset: 25   # can be freely chosen
-#  Rotate: true
-#  OffsetRotate: 1
-#  Invert: true
-
 ### You can also specify the spi device for the display to use
 # spidev: spidev0.0
 
@@ -175,4 +154,3 @@ Webserver:
 General:
   MaxNodes: 200
   MaxMessageQueue: 100
-  ConfigDirectory: /etc/meshtasticd/config.d/

bin/config.d/display-waveshare-2.8.yaml

@@ -1,18 +0,0 @@
-Display:
-
-### Waveshare 2.8inch RPi LCD
-  Panel: ST7789
-  CS: 8
-  DC: 22        # Data/Command pin
-  Backlight: 18
-  Width: 240
-  Height: 320
-  Reset: 27
-  Rotate: true
-  Invert: true
-
-Touchscreen:
-### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
-  Module: XPT2046 # Waveshare 2.8inch
-  CS: 7
-  IRQ: 17

bin/config.d/lora-waveshare-sxxx.yaml

@@ -1,8 +0,0 @@
-Lora:
-  Module: sx1262  # Waveshare SX126X XXXM
-  DIO2_AS_RF_SWITCH: true
-  CS: 21
-  IRQ: 16
-  Busy: 20
-  Reset: 18
-  SX126X_ANT_SW: 6

bin/generate_ci_matrix.py

@@ -6,7 +6,6 @@ import configparser
 import json
 import os
 import sys
-import random
 
 rootdir = "variants/"
 
@@ -40,7 +39,5 @@ for subdir, dirs, files in os.walk(rootdir):
                             "check" in options
                         ):
                             outlist.append(section)
-if ("quick" in options) & (len(outlist) > 3):
-    print(json.dumps(random.sample(outlist, 3)))
-else:
-    print(json.dumps(outlist))
+
+print(json.dumps(outlist))

bin/meshtasticd.service

@@ -1,16 +1,12 @@
 [Unit]
 Description=Meshtastic Native Daemon
 After=network-online.target
-StartLimitInterval=200
-StartLimitBurst=5
 
 [Service]
 User=root
 Group=root
 Type=simple
 ExecStart=/usr/sbin/meshtasticd
-Restart=always
-RestartSec=3
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=multi-user.target

bin/native-install.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
-mkdir -p /etc/meshtasticd
+mkdir /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml
 else

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.9\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,10 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.9 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.9"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.9/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

boards/bpi_picow_esp32_s3.json

@@ -28,8 +28,6 @@
     "flash_size": "8MB",
     "maximum_ram_size": 327680,
     "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
     "require_upload_port": true,
     "speed": 921600
   },

boards/heltec_mesh_node_t114.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DHELTEC_T114 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],

boards/icarus.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x2886", "0x0059"]],
-    "mcu": "esp32s3",
-    "variant": "icarus"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "icarus",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 8388608,
-    "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://icarus.azlan.works",
-  "vendor": "Muhammad Shah"
-}

boards/lora-relay-v1.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V1 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v1",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora-relay-v2.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_LORA_RELAY_V2 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "LORA_RELAY",
+    "mcu": "nrf52840",
+    "variant": "lora_relay_v2",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://github.com/BigCorvus/SX1262-LoRa-BLE-Relay",
+  "vendor": "BigCorvus"
+}

boards/lora_isp4520.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52832_s132_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DNRF52832_XXAA -DNRF52",
+    "f_cpu": "64000000L",
+    "mcu": "nrf52832",
+    "variant": "lora_isp4520",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS132",
+      "sd_name": "s132",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B7"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52832_xxAA",
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "lora ISP4520",
+  "upload": {
+    "maximum_ram_size": 65536,
+    "maximum_size": 524288,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"]
+  },
+  "url": "",
+  "vendor": "PsiSoft"
+}

boards/me25ls01-4y10td.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DME25LS01_4Y10TD -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/ms24sf1.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DMS24SF1 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nordic_pca10059.json

@@ -5,7 +5,7 @@
     },
     "core": "nRF5",
     "cpu": "cortex-m4",
-    "extra_flags": "-DNORDIC_PCA10059 -DNRF52840_XXAA",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x8029"],

boards/nrf52840_dk_modified.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4404"]],
+    "usb_product": "nrf52840dk",
+    "mcu": "nrf52840",
+    "variant": "pca10056-rc-clock",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "A modified NRF52840-DK devboard (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Nordic Semi"
+}

boards/ppr.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PPR -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4403"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52840",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/ppr1.json

@@ -0,0 +1,47 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52833_s113_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52833_PPR -DNRF52833_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [["0x239A", "0x4406"]],
+    "usb_product": "PPR",
+    "mcu": "nrf52833",
+    "variant": "ppr",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS113",
+      "sd_name": "s113",
+      "sd_version": "7.2.0",
+      "sd_fwid": "0x00b6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52833_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52833.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Meshtastic PPR1 (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "require_upload_port": true,
+    "speed": 115200,
+    "protocol": "jlink",
+    "protocols": ["jlink", "nrfjprog", "stlink"]
+  },
+  "url": "https://meshtastic.org/",
+  "vendor": "Othernet"
+}

boards/seeed-sensecap-indicator.json

@@ -1,42 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "partitions": "default_8MB.csv",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=0",
-      "-DARDUINO_USB_MODE=1",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x1A86", "0x7523"]],
-    "mcu": "esp32s3",
-    "variant": "esp32s3r8"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino"],
-  "name": "Seeed Studio SenseCAP Indicator",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 8388608,
-    "require_upload_port": true,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html",
-  "vendor": "Seeed Studio"
-}

boards/seeed-xiao-s3.json

@@ -1,41 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=0"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [["0x2886", "0x0059"]],
-    "mcu": "esp32s3",
-    "variant": "seeed-xiao-s3"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "seeed-xiao-s3",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 8388608,
-    "maximum_size": 8388608,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html",
-  "vendor": "Seeed Studio"
-}

boards/unphone.json

@@ -1,46 +0,0 @@
-{
-  "build": {
-    "arduino": {
-      "ldscript": "esp32s3_out.ld",
-      "memory_type": "qio_opi",
-      "partitions": "default_8MB.csv"
-    },
-    "core": "esp32",
-    "extra_flags": [
-      "-DBOARD_HAS_PSRAM",
-      "-DUNPHONE_SPIN=9",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DARDUINO_USB_MODE=0",
-      "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1"
-    ],
-    "f_cpu": "240000000L",
-    "f_flash": "80000000L",
-    "flash_mode": "qio",
-    "hwids": [
-      ["0x16D0", "0x1178"],
-      ["0x303a", "0x1001"]
-    ],
-    "mcu": "esp32s3",
-    "variant": "unphone"
-  },
-  "connectivity": ["wifi", "bluetooth", "lora"],
-  "debug": {
-    "default_tool": "esp-builtin",
-    "onboard_tools": ["esp-builtin"],
-    "openocd_target": "esp32s3.cfg"
-  },
-  "frameworks": ["arduino", "espidf"],
-  "name": "unPhone",
-  "upload": {
-    "flash_size": "8MB",
-    "maximum_ram_size": 327680,
-    "maximum_size": 8323072,
-    "use_1200bps_touch": true,
-    "wait_for_upload_port": true,
-    "require_upload_port": true,
-    "speed": 921600
-  },
-  "url": "https://unphone.net/",
-  "vendor": "University of Sheffield"
-}

images/face-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M9 11.75a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5m6 0a1.25 1.25 0 1 0 0 2.5 1.25 1.25 0 0 0 0-2.5M12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2m0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37a9.97 9.97 0 0 0 10.41 3.97c.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8"/><path fill="none" d="M0 0h24v24H0z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M9 11.75c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zm6 0c-.69 0-1.25.56-1.25 1.25s.56 1.25 1.25 1.25 1.25-.56 1.25-1.25-.56-1.25-1.25-1.25zM12 2C6.48 2 2 6.48 2 12s4.48 10 10 10 10-4.48 10-10S17.52 2 12 2zm0 18c-4.41 0-8-3.59-8-8 0-.29.02-.58.05-.86 2.36-1.05 4.23-2.98 5.21-5.37C11.07 8.33 14.05 10 17.42 10c.78 0 1.53-.09 2.25-.26.21.71.33 1.47.33 2.26 0 4.41-3.59 8-8 8z"/><path d="M0 0h24v24H0z" fill="none"/></svg>

images/location_searching-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path fill="none" d="M0 0h24v24H0z"/><path d="M20.94 11A8.994 8.994 0 0 0 13 3.06V1h-2v2.06A8.994 8.994 0 0 0 3.06 11H1v2h2.06A8.994 8.994 0 0 0 11 20.94V23h2v-2.06A8.994 8.994 0 0 0 20.94 13H23v-2zM12 19c-3.87 0-7-3.13-7-7s3.13-7 7-7 7 3.13 7 7-3.13 7-7 7"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M0 0h24v24H0z" fill="none"/><path d="M20.94 11c-.46-4.17-3.77-7.48-7.94-7.94V1h-2v2.06C6.83 3.52 3.52 6.83 3.06 11H1v2h2.06c.46 4.17 3.77 7.48 7.94 7.94V23h2v-2.06c4.17-.46 7.48-3.77 7.94-7.94H23v-2h-2.06zM12 19c-3.87 0-7-3.13-7-7s3.13-7 7-7 7 3.13 7 7-3.13 7-7 7z"/></svg>

images/room-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M12 2C8.13 2 5 5.13 5 9c0 5.25 7 13 7 13s7-7.75 7-13c0-3.87-3.13-7-7-7m0 9.5a2.5 2.5 0 0 1 0-5 2.5 2.5 0 0 1 0 5"/><path fill="none" d="M0 0h24v24H0z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M12 2C8.13 2 5 5.13 5 9c0 5.25 7 13 7 13s7-7.75 7-13c0-3.87-3.13-7-7-7zm0 9.5c-1.38 0-2.5-1.12-2.5-2.5s1.12-2.5 2.5-2.5 2.5 1.12 2.5 2.5-1.12 2.5-2.5 2.5z"/><path d="M0 0h24v24H0z" fill="none"/></svg>

images/textsms-24px.svg

@@ -1 +1 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="24" height="24" viewBox="0 0 24 24"><path d="M20 2H4c-1.1 0-1.99.9-1.99 2L2 22l4-4h14c1.1 0 2-.9 2-2V4c0-1.1-.9-2-2-2M9 11H7V9h2zm4 0h-2V9h2zm4 0h-2V9h2z"/><path fill="none" d="M0 0h24v24H0z"/></svg>
+<svg xmlns="http://www.w3.org/2000/svg" height="24" viewBox="0 0 24 24" width="24"><path d="M20 2H4c-1.1 0-1.99.9-1.99 2L2 22l4-4h14c1.1 0 2-.9 2-2V4c0-1.1-.9-2-2-2zM9 11H7V9h2v2zm4 0h-2V9h2v2zm4 0h-2V9h2v2z"/><path d="M0 0h24v24H0z" fill="none"/></svg>

platformio.ini

@@ -17,9 +17,11 @@ default_envs = tbeam
 ;default_envs = tlora-v2-1-1_6
 ;default_envs = tlora-v2-1-1_6-tcxo
 ;default_envs = tlora-t3s3-v1
+;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
 ;default_envs = canaryone
-;default_envs = native
+;default_envs = nrf52840dk-geeksville
+;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 ;default_envs = nano-g1
 ;default_envs = pca10059_diy_eink
 ;default_envs = meshtastic-diy-v1
@@ -27,7 +29,6 @@ default_envs = tbeam
 ;default_envs = meshtastic-dr-dev
 ;default_envs = m5stack-coreink
 ;default_envs = rak4631
-;default_envs = rak4631_eth_gw
 ;default_envs = rak2560
 ;default_envs = rak10701
 ;default_envs = wio-e5
@@ -59,44 +60,43 @@ build_flags = -Wno-missing-field-initializers
   -DUSE_THREAD_NAMES
   -DTINYGPS_OPTION_NO_CUSTOM_FIELDS
   -DPB_ENABLE_MALLOC=1
-  -DRADIOLIB_EXCLUDE_CC1101=1
-  -DRADIOLIB_EXCLUDE_NRF24=1
-  -DRADIOLIB_EXCLUDE_RF69=1
-  -DRADIOLIB_EXCLUDE_SX1231=1
-  -DRADIOLIB_EXCLUDE_SX1233=1
-  -DRADIOLIB_EXCLUDE_SI443X=1
-  -DRADIOLIB_EXCLUDE_RFM2X=1
-  -DRADIOLIB_EXCLUDE_AFSK=1
-  -DRADIOLIB_EXCLUDE_BELL=1
-  -DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
-  -DRADIOLIB_EXCLUDE_MORSE=1
-  -DRADIOLIB_EXCLUDE_RTTY=1
-  -DRADIOLIB_EXCLUDE_SSTV=1
-  -DRADIOLIB_EXCLUDE_AX25=1
-  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
-  -DRADIOLIB_EXCLUDE_BELL=1
-  -DRADIOLIB_EXCLUDE_PAGER=1
-  -DRADIOLIB_EXCLUDE_FSK4=1
-  -DRADIOLIB_EXCLUDE_APRS=1
-  -DRADIOLIB_EXCLUDE_LORAWAN=1
+  -DRADIOLIB_EXCLUDE_CC1101
+  -DRADIOLIB_EXCLUDE_NRF24
+  -DRADIOLIB_EXCLUDE_RF69
+  -DRADIOLIB_EXCLUDE_SX1231
+  -DRADIOLIB_EXCLUDE_SX1233
+  -DRADIOLIB_EXCLUDE_SI443X
+  -DRADIOLIB_EXCLUDE_RFM2X
+  -DRADIOLIB_EXCLUDE_AFSK
+  -DRADIOLIB_EXCLUDE_BELL
+  -DRADIOLIB_EXCLUDE_HELLSCHREIBER
+  -DRADIOLIB_EXCLUDE_MORSE
+  -DRADIOLIB_EXCLUDE_RTTY
+  -DRADIOLIB_EXCLUDE_SSTV
+  -DRADIOLIB_EXCLUDE_AX25
+  -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
+  -DRADIOLIB_EXCLUDE_BELL
+  -DRADIOLIB_EXCLUDE_PAGER
+  -DRADIOLIB_EXCLUDE_FSK4
+  -DRADIOLIB_EXCLUDE_APRS
+  -DRADIOLIB_EXCLUDE_LORAWAN
   -DMESHTASTIC_EXCLUDE_DROPZONE=1
-  -DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
-  #-DBUILD_EPOCH=$UNIX_TIME
   ;-D OLED_PL
 
 monitor_speed = 115200
 monitor_filters = direct
 
 lib_deps =
-  jgromes/RadioLib@~7.0.2
+;  jgromes/RadioLib@~6.6.0
+  https://github.com/jgromes/RadioLib.git#3115fc2d6700a9aee05888791ac930a910f2628f
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306
-  mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
+  https://github.com/mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
   https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
   https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
-  nanopb/Nanopb@^0.4.9
+  nanopb/Nanopb@^0.4.8
   erriez/ErriezCRC32@^1.0.1
-  
+
 ; Used for the code analysis in PIO Home / Inspect
 check_tool = cppcheck
 check_skip_packages = yes
@@ -127,7 +127,7 @@ lib_deps =
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-  adafruit/Adafruit BusIO@^1.16.1
+  adafruit/Adafruit BusIO@^1.15.0
   adafruit/Adafruit Unified Sensor@^1.1.11
   adafruit/Adafruit BMP280 Library@^2.6.8
   adafruit/Adafruit BMP085 Library@^1.2.4
@@ -136,31 +136,25 @@ lib_deps =
   adafruit/Adafruit MCP9808 Library@^2.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
-  adafruit/Adafruit MAX1704X@^1.0.3
   adafruit/Adafruit SHTC3 Library@^1.0.0
   adafruit/Adafruit LPS2X@^2.0.4
   adafruit/Adafruit SHT31 Library@^2.2.2
-  adafruit/Adafruit PM25 AQI Sensor@^1.1.1
+  adafruit/Adafruit PM25 AQI Sensor@^1.0.6
   adafruit/Adafruit MPU6050@^2.2.4
-  adafruit/Adafruit LIS3DH@^1.3.0
+  adafruit/Adafruit LIS3DH@^1.2.4
   adafruit/Adafruit AHTX0@^2.0.5
   adafruit/Adafruit LSM6DS@^4.7.2
   adafruit/Adafruit VEML7700 Library@^2.1.6
   adafruit/Adafruit SHT4x Library@^1.0.4
   adafruit/Adafruit TSL2591 Library@^1.4.5
   sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@^1.0.5
-  sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@^1.2.13
   ClosedCube OPT3001@^1.1.2
   emotibit/EmotiBit MLX90632@^1.0.8
   dfrobot/DFRobot_RTU@^1.0.3
-  sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@^1.1.2
-  adafruit/Adafruit MLX90614 Library@^2.1.5
-
   https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
   boschsensortec/BME68x Sensor Library@^1.1.40407
-  https://github.com/KodinLanewave/INA3221@^1.0.1
-  lewisxhe/SensorLib@0.2.0
+  https://github.com/KodinLanewave/INA3221@^1.0.0
+  lewisxhe/SensorLib@^0.2.0
   mprograms/QMC5883LCompass@^1.2.0
-  
-  https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d
-  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1
+  https://github.com/meshtastic/DFRobot_LarkWeatherStation#dee914270dc7cb3e43fbf034edd85a63a16a12ee
+  https://github.com/meshtastic/i2c-sensor#8e97122268960593c8c279df1a84a29970136a8f

src/AccelerometerThread.h

@@ -0,0 +1,297 @@
+#pragma once
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "PowerFSM.h"
+#include "concurrency/OSThread.h"
+#include "main.h"
+#include "power.h"
+
+#include <Adafruit_LIS3DH.h>
+#include <Adafruit_LSM6DS3TRC.h>
+#include <Adafruit_MPU6050.h>
+#include <Arduino.h>
+#include <SensorBMA423.hpp>
+#include <Wire.h>
+#ifdef RAK_4631
+#include "Fusion/Fusion.h"
+#include "graphics/Screen.h"
+#include "graphics/ScreenFonts.h"
+#include <Rak_BMX160.h>
+#endif
+
+#define ACCELEROMETER_CHECK_INTERVAL_MS 100
+#define ACCELEROMETER_CLICK_THRESHOLD 40
+
+static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.endTransmission();
+    Wire.requestFrom((uint8_t)address, (uint8_t)len);
+    uint8_t i = 0;
+    while (Wire.available()) {
+        data[i++] = Wire.read();
+    }
+    return 0; // Pass
+}
+
+static inline int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
+{
+    Wire.beginTransmission(address);
+    Wire.write(reg);
+    Wire.write(data, len);
+    return (0 != Wire.endTransmission());
+}
+
+class AccelerometerThread : public concurrency::OSThread
+{
+  public:
+    explicit AccelerometerThread(ScanI2C::DeviceType type) : OSThread("AccelerometerThread")
+    {
+        if (accelerometer_found.port == ScanI2C::I2CPort::NO_I2C) {
+            LOG_DEBUG("AccelerometerThread disabling due to no sensors found\n");
+            disable();
+            return;
+        }
+        acceleremoter_type = type;
+#ifndef RAK_4631
+        if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
+            LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
+            disable();
+            return;
+        }
+#endif
+        init();
+    }
+
+    void start()
+    {
+        init();
+        setIntervalFromNow(0);
+    };
+
+  protected:
+    int32_t runOnce() override
+    {
+        canSleep = true; // Assume we should not keep the board awake
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.getMotionInterruptStatus()) {
+            wakeScreen();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.getClick() > 0) {
+            uint8_t click = lis.getClick();
+            if (!config.device.double_tap_as_button_press) {
+                wakeScreen();
+            }
+
+            if (config.device.double_tap_as_button_press && (click & 0x20)) {
+                buttonPress();
+                return 500;
+            }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.readIrqStatus() != DEV_WIRE_NONE) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleTap()) {
+                wakeScreen();
+                return 500;
+            }
+#ifdef RAK_4631
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMX160) {
+            sBmx160SensorData_t magAccel;
+            sBmx160SensorData_t gAccel;
+
+            /* Get a new sensor event */
+            bmx160.getAllData(&magAccel, NULL, &gAccel);
+
+            // expirimental calibrate routine. Limited to between 10 and 30 seconds after boot
+            if (millis() > 12 * 1000 && millis() < 30 * 1000) {
+                if (!showingScreen) {
+                    showingScreen = true;
+                    screen->startAlert((FrameCallback)drawFrameCalibration);
+                }
+                if (magAccel.x > highestX)
+                    highestX = magAccel.x;
+                if (magAccel.x < lowestX)
+                    lowestX = magAccel.x;
+                if (magAccel.y > highestY)
+                    highestY = magAccel.y;
+                if (magAccel.y < lowestY)
+                    lowestY = magAccel.y;
+                if (magAccel.z > highestZ)
+                    highestZ = magAccel.z;
+                if (magAccel.z < lowestZ)
+                    lowestZ = magAccel.z;
+            } else if (showingScreen && millis() >= 30 * 1000) {
+                showingScreen = false;
+                screen->endAlert();
+            }
+
+            int highestRealX = highestX - (highestX + lowestX) / 2;
+
+            magAccel.x -= (highestX + lowestX) / 2;
+            magAccel.y -= (highestY + lowestY) / 2;
+            magAccel.z -= (highestZ + lowestZ) / 2;
+            FusionVector ga, ma;
+            ga.axis.x = -gAccel.x; // default location for the BMX160 is on the rear of the board
+            ga.axis.y = -gAccel.y;
+            ga.axis.z = gAccel.z;
+            ma.axis.x = -magAccel.x;
+            ma.axis.y = -magAccel.y;
+            ma.axis.z = magAccel.z * 3;
+
+            // If we're set to one of the inverted positions
+            if (config.display.compass_orientation > meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270) {
+                ma = FusionAxesSwap(ma, FusionAxesAlignmentNXNYPZ);
+                ga = FusionAxesSwap(ga, FusionAxesAlignmentNXNYPZ);
+            }
+
+            float heading = FusionCompassCalculateHeading(FusionConventionNed, ga, ma);
+
+            switch (config.display.compass_orientation) {
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0_INVERTED:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_0:
+                break;
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_90_INVERTED:
+                heading += 90;
+                break;
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_180_INVERTED:
+                heading += 180;
+                break;
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270:
+            case meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270_INVERTED:
+                heading += 270;
+                break;
+            }
+
+            screen->setHeading(heading);
+
+#endif
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.shake()) {
+            wakeScreen();
+            return 500;
+        }
+
+        return ACCELEROMETER_CHECK_INTERVAL_MS;
+    }
+
+  private:
+    void init()
+    {
+        LOG_DEBUG("AccelerometerThread initializing\n");
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+            LOG_DEBUG("MPU6050 initializing\n");
+            // setup motion detection
+            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
+            mpu.setMotionDetectionThreshold(1);
+            mpu.setMotionDetectionDuration(20);
+            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
+            mpu.setInterruptPinPolarity(true);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+            LOG_DEBUG("LIS3DH initializing\n");
+            lis.setRange(LIS3DH_RANGE_2_G);
+            // Adjust threshold, higher numbers are less sensitive
+            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 &&
+                   bmaSensor.begin(accelerometer_found.address, &readRegister, &writeRegister)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            bmaSensor.configAccelerometer(bmaSensor.RANGE_2G, bmaSensor.ODR_100HZ, bmaSensor.BW_NORMAL_AVG4,
+                                          bmaSensor.PERF_CONTINUOUS_MODE);
+            bmaSensor.enableAccelerometer();
+            bmaSensor.configInterrupt(BMA4_LEVEL_TRIGGER, BMA4_ACTIVE_HIGH, BMA4_PUSH_PULL, BMA4_OUTPUT_ENABLE,
+                                      BMA4_INPUT_DISABLE);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+#ifdef T_WATCH_S3
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setReampAxes(bmaSensor.REMAP_TOP_LAYER_RIGHT_CORNER);
+#else
+            bmaSensor.setReampAxes(bmaSensor.REMAP_BOTTOM_LAYER_BOTTOM_LEFT_CORNER);
+#endif
+            // bmaSensor.enableFeature(bmaSensor.FEATURE_STEP_CNTR, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_TILT, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_WAKEUP, true);
+            // bmaSensor.resetPedometer();
+
+            // Turn on feature interrupt
+            bmaSensor.enablePedometerIRQ();
+            bmaSensor.enableTiltIRQ();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupIRQ();
+#ifdef RAK_4631
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMX160 && bmx160.begin()) {
+            bmx160.ODR_Config(BMX160_ACCEL_ODR_100HZ, BMX160_GYRO_ODR_100HZ); // set output data rate
+
+#endif
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.begin_I2C(accelerometer_found.address)) {
+            LOG_DEBUG("LSM6DS3 initializing\n");
+            // Default threshold of 2G, less sensitive options are 4, 8 or 16G
+            lsm.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
+#ifndef LSM6DS3_WAKE_THRESH
+#define LSM6DS3_WAKE_THRESH 20
+#endif
+            lsm.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
+            // Duration is number of occurances needed to trigger, higher threshold is less sensitive
+        }
+    }
+    void wakeScreen()
+    {
+        if (powerFSM.getState() == &stateDARK) {
+            LOG_INFO("Tap or motion detected. Turning on screen\n");
+            powerFSM.trigger(EVENT_INPUT);
+        }
+    }
+
+    void buttonPress()
+    {
+        LOG_DEBUG("Double-tap detected. Firing button press\n");
+        powerFSM.trigger(EVENT_PRESS);
+    }
+
+    ScanI2C::DeviceType acceleremoter_type;
+    Adafruit_MPU6050 mpu;
+    Adafruit_LIS3DH lis;
+    Adafruit_LSM6DS3TRC lsm;
+    SensorBMA423 bmaSensor;
+    bool BMA_IRQ = false;
+#ifdef RAK_4631
+    bool showingScreen = false;
+    RAK_BMX160 bmx160;
+    float highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
+
+    static void drawFrameCalibration(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+    {
+        int x_offset = display->width() / 2;
+        int y_offset = display->height() <= 80 ? 0 : 32;
+        display->setTextAlignment(TEXT_ALIGN_LEFT);
+        display->setFont(FONT_MEDIUM);
+        display->drawString(x, y, "Calibrating\nCompass");
+        int16_t compassX = 0, compassY = 0;
+        uint16_t compassDiam = graphics::Screen::getCompassDiam(display->getWidth(), display->getHeight());
+
+        // coordinates for the center of the compass/circle
+        if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
+            compassX = x + display->getWidth() - compassDiam / 2 - 5;
+            compassY = y + display->getHeight() / 2;
+        } else {
+            compassX = x + display->getWidth() - compassDiam / 2 - 5;
+            compassY = y + FONT_HEIGHT_SMALL + (display->getHeight() - FONT_HEIGHT_SMALL) / 2;
+        }
+        display->drawCircle(compassX, compassY, compassDiam / 2);
+        screen->drawCompassNorth(display, compassX, compassY, screen->getHeading() * PI / 180);
+    }
+#endif
+};
+
+#endif

src/AmbientLightingThread.h

@@ -42,18 +42,18 @@ class AmbientLightingThread : public concurrency::OSThread
 #ifdef HAS_NCP5623
         _type = type;
         if (_type == ScanI2C::DeviceType::NONE) {
-            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus");
+            LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus\n");
             disable();
             return;
         }
 #endif
 #if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
         if (!moduleConfig.ambient_lighting.led_state) {
-            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF");
+            LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
             disable();
             return;
         }
-        LOG_DEBUG("AmbientLightingThread initializing");
+        LOG_DEBUG("AmbientLightingThread initializing\n");
 #ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
@@ -106,27 +106,27 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(0);
         rgb.setGreen(0);
         rgb.setBlue(0);
-        LOG_INFO("Turn Off NCP5623 Ambient lighting.");
+        LOG_INFO("Turn Off NCP5623 Ambient lighting.\n");
 #endif
 #ifdef HAS_NEOPIXEL
         pixels.clear();
         pixels.show();
-        LOG_INFO("Turn Off NeoPixel Ambient lighting.");
+        LOG_INFO("Turn Off NeoPixel Ambient lighting.\n");
 #endif
 #ifdef RGBLED_CA
         analogWrite(RGBLED_RED, 255 - 0);
         analogWrite(RGBLED_GREEN, 255 - 0);
         analogWrite(RGBLED_BLUE, 255 - 0);
-        LOG_INFO("Turn Off Ambient lighting RGB Common Anode.");
+        LOG_INFO("Turn Off Ambient lighting RGB Common Anode.\n");
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, 0);
         analogWrite(RGBLED_GREEN, 0);
         analogWrite(RGBLED_BLUE, 0);
-        LOG_INFO("Turn Off Ambient lighting RGB Common Cathode.");
+        LOG_INFO("Turn Off Ambient lighting RGB Common Cathode.\n");
 #endif
 #ifdef UNPHONE
         unphone.rgb(0, 0, 0);
-        LOG_INFO("Turn Off unPhone Ambient lighting.");
+        LOG_INFO("Turn Off unPhone Ambient lighting.\n");
 #endif
         return 0;
     }
@@ -138,7 +138,7 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(moduleConfig.ambient_lighting.red);
         rgb.setGreen(moduleConfig.ambient_lighting.green);
         rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d",
+        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                   moduleConfig.ambient_lighting.blue);
 #endif
@@ -158,7 +158,7 @@ class AmbientLightingThread : public concurrency::OSThread
 #endif
 #endif
         pixels.show();
-        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d",
+        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                   moduleConfig.ambient_lighting.blue);
 #endif
@@ -166,18 +166,18 @@ class AmbientLightingThread : public concurrency::OSThread
         analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
         analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d",
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #elif defined(RGBLED_RED)
         analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
         analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
         analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d",
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
 #ifdef UNPHONE
         unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red,
+        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d\n", moduleConfig.ambient_lighting.red,
                   moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
     }

src/ButtonThread.cpp

@@ -36,7 +36,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #if defined(ARCH_PORTDUINO)
     if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
         this->userButton = OneButton(settingsMap[user], true, true);
-        LOG_DEBUG("Using GPIO%02d for button", settingsMap[user]);
+        LOG_DEBUG("Using GPIO%02d for button\n", settingsMap[user]);
     }
 #elif defined(BUTTON_PIN)
     int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
@@ -47,7 +47,7 @@ ButtonThread::ButtonThread() : OSThread("Button")
 #else
     this->userButton = OneButton(pin, true, true);
 #endif
-    LOG_DEBUG("Using GPIO%02d for button", pin);
+    LOG_DEBUG("Using GPIO%02d for button\n", pin);
 #endif
 
 #ifdef INPUT_PULLUP_SENSE
@@ -123,12 +123,7 @@ int32_t ButtonThread::runOnce()
     if (btnEvent != BUTTON_EVENT_NONE) {
         switch (btnEvent) {
         case BUTTON_EVENT_PRESSED: {
-            LOG_BUTTON("press!");
-            // If a nag notification is running, stop it and prevent other actions
-            if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
-                externalNotificationModule->stopNow();
-                return 50;
-            }
+            LOG_BUTTON("press!\n");
 #ifdef BUTTON_PIN
             if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
                  moduleConfig.canned_message.inputbroker_pin_press) ||
@@ -148,7 +143,7 @@ int32_t ButtonThread::runOnce()
         }
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
-            LOG_BUTTON("Double press!");
+            LOG_BUTTON("Double press!\n");
             service->refreshLocalMeshNode();
             auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
             if (screen) {
@@ -162,7 +157,7 @@ int32_t ButtonThread::runOnce()
         }
 
         case BUTTON_EVENT_MULTI_PRESSED: {
-            LOG_BUTTON("Mulitipress! %hux", multipressClickCount);
+            LOG_BUTTON("Mulitipress! %hux\n", multipressClickCount);
             switch (multipressClickCount) {
 #if HAS_GPS
             // 3 clicks: toggle GPS
@@ -189,7 +184,7 @@ int32_t ButtonThread::runOnce()
         } // end multipress event
 
         case BUTTON_EVENT_LONG_PRESSED: {
-            LOG_BUTTON("Long press!");
+            LOG_BUTTON("Long press!\n");
             powerFSM.trigger(EVENT_PRESS);
             if (screen) {
                 screen->startAlert("Shutting down...");
@@ -201,7 +196,7 @@ int32_t ButtonThread::runOnce()
         // Do actual shutdown when button released, otherwise the button release
         // may wake the board immediatedly.
         case BUTTON_EVENT_LONG_RELEASED: {
-            LOG_INFO("Shutdown from long press");
+            LOG_INFO("Shutdown from long press\n");
             playShutdownMelody();
             delay(3000);
             power->shutdown();
@@ -210,7 +205,7 @@ int32_t ButtonThread::runOnce()
 
 #ifdef BUTTON_PIN_TOUCH
         case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
-            LOG_BUTTON("Touch press!");
+            LOG_BUTTON("Touch press!\n");
             if (screen) {
                 // Wake if asleep
                 if (powerFSM.getState() == &stateDARK)

src/FSCommon.cpp

@@ -53,7 +53,7 @@ bool lfs_assert_failed =
 
 extern "C" void lfs_assert(const char *reason)
 {
-    LOG_ERROR("LFS assert: %s", reason);
+    LOG_ERROR("LFS assert: %s\n", reason);
     lfs_assert_failed = true;
 }
 
@@ -75,19 +75,19 @@ bool copyFile(const char *from, const char *to)
     r = OSFS::getFile(from, cbuffer);
 
     if (r == notfound) {
-        LOG_ERROR("Failed to open source file %s", from);
+        LOG_ERROR("Failed to open source file %s\n", from);
         return false;
     } else if (r == noerr) {
         r = OSFS::newFile(to, cbuffer, true);
         if (r == noerr) {
             return true;
         } else {
-            LOG_ERROR("OSFS Error %d", r);
+            LOG_ERROR("OSFS Error %d\n", r);
             return false;
         }
 
     } else {
-        LOG_ERROR("OSFS Error %d", r);
+        LOG_ERROR("OSFS Error %d\n", r);
         return false;
     }
     return true;
@@ -97,13 +97,13 @@ bool copyFile(const char *from, const char *to)
 
     File f1 = FSCom.open(from, FILE_O_READ);
     if (!f1) {
-        LOG_ERROR("Failed to open source file %s", from);
+        LOG_ERROR("Failed to open source file %s\n", from);
         return false;
     }
 
     File f2 = FSCom.open(to, FILE_O_WRITE);
     if (!f2) {
-        LOG_ERROR("Failed to open destination file %s", to);
+        LOG_ERROR("Failed to open destination file %s\n", to);
         return false;
     }
 
@@ -231,7 +231,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
 #ifdef ARCH_ESP32
                 listDir(file.path(), levels - 1, del);
                 if (del) {
-                    LOG_DEBUG("Removing %s", file.path());
+                    LOG_DEBUG("Removing %s\n", file.path());
                     strncpy(buffer, file.path(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
@@ -241,7 +241,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
                 listDir(file.name(), levels - 1, del);
                 if (del) {
-                    LOG_DEBUG("Removing %s", file.name());
+                    LOG_DEBUG("Removing %s\n", file.name());
                     strncpy(buffer, file.name(), sizeof(buffer));
                     file.close();
                     FSCom.rmdir(buffer);
@@ -249,7 +249,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
                     file.close();
                 }
 #else
-                LOG_DEBUG(" %s (directory)", file.name());
+                LOG_DEBUG(" %s (directory)\n", file.name());
                 listDir(file.name(), levels - 1, del);
                 file.close();
 #endif
@@ -257,26 +257,26 @@ void listDir(const char *dirname, uint8_t levels, bool del)
         } else {
 #ifdef ARCH_ESP32
             if (del) {
-                LOG_DEBUG("Deleting %s", file.path());
+                LOG_DEBUG("Deleting %s\n", file.path());
                 strncpy(buffer, file.path(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
-                LOG_DEBUG(" %s (%i Bytes)", file.path(), file.size());
+                LOG_DEBUG(" %s (%i Bytes)\n", file.path(), file.size());
                 file.close();
             }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
             if (del) {
-                LOG_DEBUG("Deleting %s", file.name());
+                LOG_DEBUG("Deleting %s\n", file.name());
                 strncpy(buffer, file.name(), sizeof(buffer));
                 file.close();
                 FSCom.remove(buffer);
             } else {
-                LOG_DEBUG(" %s (%i Bytes)", file.name(), file.size());
+                LOG_DEBUG(" %s (%i Bytes)\n", file.name(), file.size());
                 file.close();
             }
 #else
-            LOG_DEBUG("   %s (%i Bytes)", file.name(), file.size());
+            LOG_DEBUG("   %s (%i Bytes)\n", file.name(), file.size());
             file.close();
 #endif
         }
@@ -284,7 +284,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
     }
 #ifdef ARCH_ESP32
     if (del) {
-        LOG_DEBUG("Removing %s", root.path());
+        LOG_DEBUG("Removing %s\n", root.path());
         strncpy(buffer, root.path(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
@@ -293,7 +293,7 @@ void listDir(const char *dirname, uint8_t levels, bool del)
     }
 #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
     if (del) {
-        LOG_DEBUG("Removing %s", root.name());
+        LOG_DEBUG("Removing %s\n", root.name());
         strncpy(buffer, root.name(), sizeof(buffer));
         root.close();
         FSCom.rmdir(buffer);
@@ -329,13 +329,13 @@ void fsInit()
 {
 #ifdef FSCom
     if (!FSBegin()) {
-        LOG_ERROR("Filesystem mount Failed.");
+        LOG_ERROR("Filesystem mount Failed.\n");
         // assert(0); This auto-formats the partition, so no need to fail here.
     }
 #if defined(ARCH_ESP32)
-    LOG_DEBUG("Filesystem files (%d/%d Bytes):", FSCom.usedBytes(), FSCom.totalBytes());
+    LOG_DEBUG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
 #else
-    LOG_DEBUG("Filesystem files:");
+    LOG_DEBUG("Filesystem files:\n");
 #endif
     listDir("/", 10);
 #endif
@@ -350,28 +350,28 @@ void setupSDCard()
     SDHandler.begin(SPI_SCK, SPI_MISO, SPI_MOSI);
 
     if (!SD.begin(SDCARD_CS, SDHandler)) {
-        LOG_DEBUG("No SD_MMC card detected");
+        LOG_DEBUG("No SD_MMC card detected\n");
         return;
     }
     uint8_t cardType = SD.cardType();
     if (cardType == CARD_NONE) {
-        LOG_DEBUG("No SD_MMC card attached");
+        LOG_DEBUG("No SD_MMC card attached\n");
         return;
     }
     LOG_DEBUG("SD_MMC Card Type: ");
     if (cardType == CARD_MMC) {
-        LOG_DEBUG("MMC");
+        LOG_DEBUG("MMC\n");
     } else if (cardType == CARD_SD) {
-        LOG_DEBUG("SDSC");
+        LOG_DEBUG("SDSC\n");
     } else if (cardType == CARD_SDHC) {
-        LOG_DEBUG("SDHC");
+        LOG_DEBUG("SDHC\n");
     } else {
-        LOG_DEBUG("UNKNOWN");
+        LOG_DEBUG("UNKNOWN\n");
     }
 
     uint64_t cardSize = SD.cardSize() / (1024 * 1024);
-    LOG_DEBUG("SD Card Size: %lu MB", (uint32_t)cardSize);
-    LOG_DEBUG("Total space: %lu MB", (uint32_t)(SD.totalBytes() / (1024 * 1024)));
-    LOG_DEBUG("Used space: %lu MB", (uint32_t)(SD.usedBytes() / (1024 * 1024)));
+    LOG_DEBUG("SD Card Size: %lluMB\n", cardSize);
+    LOG_DEBUG("Total space: %llu MB\n", SD.totalBytes() / (1024 * 1024));
+    LOG_DEBUG("Used space: %llu MB\n", SD.usedBytes() / (1024 * 1024));
 #endif
 }

src/GPSStatus.h

@@ -51,7 +51,7 @@ class GPSStatus : public Status
     {
         if (config.position.fixed_position) {
 #ifdef GPS_EXTRAVERBOSE
-            LOG_WARN("Using fixed latitude");
+            LOG_WARN("Using fixed latitude\n");
 #endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.latitude_i;
@@ -64,7 +64,7 @@ class GPSStatus : public Status
     {
         if (config.position.fixed_position) {
 #ifdef GPS_EXTRAVERBOSE
-            LOG_WARN("Using fixed longitude");
+            LOG_WARN("Using fixed longitude\n");
 #endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.longitude_i;
@@ -77,7 +77,7 @@ class GPSStatus : public Status
     {
         if (config.position.fixed_position) {
 #ifdef GPS_EXTRAVERBOSE
-            LOG_WARN("Using fixed altitude");
+            LOG_WARN("Using fixed altitude\n");
 #endif
             meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.altitude;
@@ -95,7 +95,7 @@ class GPSStatus : public Status
     bool matches(const GPSStatus *newStatus) const
     {
 #ifdef GPS_EXTRAVERBOSE
-        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x", newStatus->p.timestamp, p.timestamp);
+        LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x\n", newStatus->p.timestamp, p.timestamp);
 #endif
         return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected ||
                 newStatus->isPowerSaving != isPowerSaving || newStatus->p.latitude_i != p.latitude_i ||
@@ -112,7 +112,7 @@ class GPSStatus : public Status
 
         if (isDirty && p.timestamp && (newStatus->p.timestamp == p.timestamp)) {
             // We can NEVER be in two locations at the same time! (also PR #886)
-            LOG_ERROR("BUG: Positional timestamp unchanged from prev solution");
+            LOG_ERROR("BUG: Positional timestamp unchanged from prev solution\n");
         }
 
         initialized = true;
@@ -124,11 +124,11 @@ class GPSStatus : public Status
         if (isDirty) {
             if (hasLock) {
                 // In debug logs, identify position by @timestamp:stage (stage 3 = notify)
-                LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d", p.timestamp,
+                LOG_DEBUG("New GPS pos@%x:3 lat=%f lon=%f alt=%d pdop=%.2f track=%.2f speed=%.2f sats=%d\n", p.timestamp,
                           p.latitude_i * 1e-7, p.longitude_i * 1e-7, p.altitude, p.PDOP * 1e-2, p.ground_track * 1e-5,
                           p.ground_speed * 1e-2, p.sats_in_view);
             } else {
-                LOG_DEBUG("No GPS lock");
+                LOG_DEBUG("No GPS lock\n");
             }
             onNewStatus.notifyObservers(this);
         }

src/GpioLogic.cpp

@@ -12,7 +12,7 @@ void GpioVirtPin::set(bool value)
 
 void GpioHwPin::set(bool value)
 {
-    // if (num == 3) LOG_DEBUG("Setting pin %d to %d", num, value);
+    // if (num == 3) LOG_DEBUG("Setting pin %d to %d\n", num, value);
     pinMode(num, OUTPUT);
     digitalWrite(num, value);
 }
@@ -88,7 +88,7 @@ void GpioBinaryTransformer::update()
             newValue = (GpioVirtPin::PinState)(p1 && p2);
             break;
         case Or:
-            // LOG_DEBUG("Doing GPIO OR");
+            // LOG_DEBUG("Doing GPIO OR\n");
             newValue = (GpioVirtPin::PinState)(p1 || p2);
             break;
         case Xor:

src/NodeStatus.h

@@ -56,7 +56,7 @@ class NodeStatus : public Status
             numTotal = newStatus->getNumTotal();
         }
         if (isDirty || newStatus->forceUpdate) {
-            LOG_DEBUG("Node status update: %d online, %d total", numOnline, numTotal);
+            LOG_DEBUG("Node status update: %d online, %d total\n", numOnline, numTotal);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/Power.cpp

@@ -13,7 +13,6 @@
 #include "power.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
-#include "Throttle.h"
 #include "buzz/buzz.h"
 #include "configuration.h"
 #include "main.h"
@@ -31,7 +30,6 @@
 #if HAS_WIFI
 #include <WiFi.h>
 #endif
-
 #endif
 
 #ifndef DELAY_FOREVER
@@ -77,15 +75,6 @@ INA219Sensor ina219Sensor;
 INA3221Sensor ina3221Sensor;
 #endif
 
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-#include "modules/Telemetry/Sensor/MAX17048Sensor.h"
-#include <utility>
-extern std::pair<uint8_t, TwoWire *> nodeTelemetrySensorsMap[_meshtastic_TelemetrySensorType_MAX + 1];
-#if HAS_TELEMETRY && (!MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR || !MESHTASTIC_EXCLUDE_POWER_TELEMETRY)
-MAX17048Sensor max17048Sensor;
-#endif
-#endif
-
 #if HAS_RAKPROT && !defined(ARCH_PORTDUINO)
 RAK9154Sensor rak9154Sensor;
 #endif
@@ -147,23 +136,14 @@ using namespace meshtastic;
  */
 static HasBatteryLevel *batteryLevel; // Default to NULL for no battery level sensor
 
-#ifdef BATTERY_PIN
-
 static void adcEnable()
 {
 #ifdef ADC_CTRL // enable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
     pinMode(ADC_CTRL, INPUT_PULLUP);
-#else
-#ifdef HELTEC_V3
-    pinMode(ADC_CTRL, INPUT);
-    uint8_t adc_ctl_enable_value = !(digitalRead(ADC_CTRL));
-    pinMode(ADC_CTRL, OUTPUT);
-    digitalWrite(ADC_CTRL, adc_ctl_enable_value);
 #else
     pinMode(ADC_CTRL, OUTPUT);
     digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
-#endif
 #endif
     delay(10);
 #endif
@@ -174,24 +154,17 @@ static void adcDisable()
 #ifdef ADC_CTRL // disable adc voltage divider when we need to read
 #ifdef ADC_USE_PULLUP
     pinMode(ADC_CTRL, INPUT_PULLDOWN);
-#else
-#ifdef HELTEC_V3
-    pinMode(ADC_CTRL, ANALOG);
 #else
     digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
 #endif
 #endif
-#endif
 }
 
-#endif
-
 /**
  * A simple battery level sensor that assumes the battery voltage is attached via a voltage-divider to an analog input
  */
 class AnalogBatteryLevel : public HasBatteryLevel
 {
-  public:
     /**
      * Battery state of charge, from 0 to 100 or -1 for unknown
      */
@@ -251,7 +224,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
     !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
-            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage", config.power.device_battery_ina_address);
+            LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
             return getINAVoltage();
         }
 #endif
@@ -271,7 +244,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
             config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER;
         // Do not call analogRead() often.
         const uint32_t min_read_interval = 5000;
-        if (!Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) {
+        if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
             uint32_t raw = 0;
@@ -301,7 +274,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
             }
 
-            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
+            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
             // (last_read_value));
         }
         return last_read_value;
@@ -346,7 +319,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
                 raw += adc_buf;
                 raw_c++; // Count valid samples
             } else {
-                LOG_DEBUG("An attempt to sample ADC2 failed");
+                LOG_DEBUG("An attempt to sample ADC2 failed\n");
             }
         }
 
@@ -371,12 +344,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    // if we have a integrated device with a battery, we can assume that the battery is always connected
-#ifdef BATTERY_IMMUTABLE
-    virtual bool isBatteryConnect() override { return true; }
-#else
     virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
-#endif
 
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
@@ -511,7 +479,7 @@ bool Power::analogInit()
 #endif
 
 #ifdef BATTERY_PIN
-    LOG_DEBUG("Using analog input %d for battery level", BATTERY_PIN);
+    LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
 
     // disable any internal pullups
     pinMode(BATTERY_PIN, INPUT);
@@ -542,18 +510,18 @@ bool Power::analogInit()
     esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
     // show ADC characterization base
     if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
-        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse");
+        LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
     } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
-        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse");
+        LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
     }
 #ifdef CONFIG_IDF_TARGET_ESP32S3
     // ESP32S3
     else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
-        LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse");
+        LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse\n");
     }
 #endif
     else {
-        LOG_INFO("ADCmod: ADC characterization based on default reference voltage");
+        LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
     }
 #endif // ARCH_ESP32
 
@@ -583,12 +551,7 @@ bool Power::analogInit()
  */
 bool Power::setup()
 {
-    // initialise one power sensor (only)
-    bool found = axpChipInit();
-    if (!found)
-        found = lipoInit();
-    if (!found)
-        found = analogInit();
+    bool found = axpChipInit() || analogInit();
 
 #ifdef NRF_APM
     found = true;
@@ -602,9 +565,9 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-    LOG_INFO("Shutting down");
+    LOG_INFO("Shutting down\n");
 
-#if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
 #ifdef PIN_LED1
     ledOff(PIN_LED1);
 #endif
@@ -657,7 +620,7 @@ void Power::readPowerStatus()
                // changes.
 
     nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
-    // LOG_DEBUG("NRF Power %d", nrf_usb_state);
+    // LOG_DEBUG("NRF Power %d\n", nrf_usb_state);
 
     // If changed to DISCONNECTED
     if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED)
@@ -670,22 +633,22 @@ void Power::readPowerStatus()
 
     // Notify any status instances that are observing us
     const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isCharging, batteryVoltageMv, batteryChargePercent);
-    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d", powerStatus2.getHasUSB(), powerStatus2.getIsCharging(),
-              powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
+              powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
     newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
     if (lastheap != memGet.getFreeHeap()) {
-        std::string threadlist = "Threads running:";
+        LOG_DEBUG("Threads running:");
         int running = 0;
         for (int i = 0; i < MAX_THREADS; i++) {
             auto thread = concurrency::mainController.get(i);
             if ((thread != nullptr) && (thread->enabled)) {
-                threadlist += vformat(" %s", thread->ThreadName.c_str());
+                LOG_DEBUG(" %s", thread->ThreadName.c_str());
                 running++;
             }
         }
-        LOG_DEBUG(threadlist.c_str());
-        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads", memGet.getFreeHeap(), memGet.getHeapSize(),
+        LOG_DEBUG("\n");
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
                   memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
         lastheap = memGet.getFreeHeap();
     }
@@ -718,13 +681,13 @@ void Power::readPowerStatus()
     if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
         if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
             low_voltage_counter++;
-            LOG_DEBUG("Low voltage counter: %d/10", low_voltage_counter);
+            LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
             if (low_voltage_counter > 10) {
 #ifdef ARCH_NRF52
                 // We can't trigger deep sleep on NRF52, it's freezing the board
-                LOG_DEBUG("Low voltage detected, but not triggering deep sleep");
+                LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
 #else
-                LOG_INFO("Low voltage detected, triggering deep sleep");
+                LOG_INFO("Low voltage detected, triggering deep sleep\n");
                 powerFSM.trigger(EVENT_LOW_BATTERY);
 #endif
             }
@@ -746,12 +709,12 @@ int32_t Power::runOnce()
         PMU->getIrqStatus();
 
         if (PMU->isVbusRemoveIrq()) {
-            LOG_INFO("USB unplugged");
+            LOG_INFO("USB unplugged\n");
             powerFSM.trigger(EVENT_POWER_DISCONNECTED);
         }
 
         if (PMU->isVbusInsertIrq()) {
-            LOG_INFO("USB plugged In");
+            LOG_INFO("USB plugged In\n");
             powerFSM.trigger(EVENT_POWER_CONNECTED);
         }
 
@@ -759,21 +722,21 @@ int32_t Power::runOnce()
         Other things we could check if we cared...
 
         if (PMU->isBatChagerStartIrq()) {
-            LOG_DEBUG("Battery start charging");
+            LOG_DEBUG("Battery start charging\n");
         }
         if (PMU->isBatChagerDoneIrq()) {
-            LOG_DEBUG("Battery fully charged");
+            LOG_DEBUG("Battery fully charged\n");
         }
         if (PMU->isBatInsertIrq()) {
-            LOG_DEBUG("Battery inserted");
+            LOG_DEBUG("Battery inserted\n");
         }
         if (PMU->isBatRemoveIrq()) {
-            LOG_DEBUG("Battery removed");
+            LOG_DEBUG("Battery removed\n");
         }
         */
 #ifndef T_WATCH_S3 // FIXME - why is this triggering on the T-Watch S3?
         if (PMU->isPekeyLongPressIrq()) {
-            LOG_DEBUG("PEK long button press");
+            LOG_DEBUG("PEK long button press\n");
             screen->setOn(false);
         }
 #endif
@@ -816,22 +779,22 @@ bool Power::axpChipInit()
     if (!PMU) {
         PMU = new XPowersAXP2101(*w);
         if (!PMU->init()) {
-            LOG_WARN("Failed to find AXP2101 power management");
+            LOG_WARN("Failed to find AXP2101 power management\n");
             delete PMU;
             PMU = NULL;
         } else {
-            LOG_INFO("AXP2101 PMU init succeeded, using AXP2101 PMU");
+            LOG_INFO("AXP2101 PMU init succeeded, using AXP2101 PMU\n");
         }
     }
 
     if (!PMU) {
         PMU = new XPowersAXP192(*w);
         if (!PMU->init()) {
-            LOG_WARN("Failed to find AXP192 power management");
+            LOG_WARN("Failed to find AXP192 power management\n");
             delete PMU;
             PMU = NULL;
         } else {
-            LOG_INFO("AXP192 PMU init succeeded, using AXP192 PMU");
+            LOG_INFO("AXP192 PMU init succeeded, using AXP192 PMU\n");
         }
     }
 
@@ -987,54 +950,56 @@ bool Power::axpChipInit()
     PMU->enableVbusVoltageMeasure();
     PMU->enableBattVoltageMeasure();
 
+    LOG_DEBUG("=======================================================================\n");
     if (PMU->isChannelAvailable(XPOWERS_DCDC1)) {
-        LOG_DEBUG("DC1  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-",
+        LOG_DEBUG("DC1  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC1));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC2)) {
-        LOG_DEBUG("DC2  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-",
+        LOG_DEBUG("DC2  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC2));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC3)) {
-        LOG_DEBUG("DC3  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-",
+        LOG_DEBUG("DC3  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC3));
     }
     if (PMU->isChannelAvailable(XPOWERS_DCDC4)) {
-        LOG_DEBUG("DC4  : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-",
+        LOG_DEBUG("DC4  : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_DCDC4));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO2)) {
-        LOG_DEBUG("LDO2 : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-",
+        LOG_DEBUG("LDO2 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_LDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_LDO3)) {
-        LOG_DEBUG("LDO3 : %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-",
+        LOG_DEBUG("LDO3 : %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_LDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO1)) {
-        LOG_DEBUG("ALDO1: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-",
+        LOG_DEBUG("ALDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO2)) {
-        LOG_DEBUG("ALDO2: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-",
+        LOG_DEBUG("ALDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO2));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO3)) {
-        LOG_DEBUG("ALDO3: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-",
+        LOG_DEBUG("ALDO3: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO3));
     }
     if (PMU->isChannelAvailable(XPOWERS_ALDO4)) {
-        LOG_DEBUG("ALDO4: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-",
+        LOG_DEBUG("ALDO4: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_ALDO4));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO1)) {
-        LOG_DEBUG("BLDO1: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-",
+        LOG_DEBUG("BLDO1: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO1));
     }
     if (PMU->isChannelAvailable(XPOWERS_BLDO2)) {
-        LOG_DEBUG("BLDO2: %s   Voltage:%u mV ", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-",
+        LOG_DEBUG("BLDO2: %s   Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-",
                   PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
     }
+    LOG_DEBUG("=======================================================================\n");
 
 // We can safely ignore this approach for most (or all) boards because MCU turned off
 // earlier than battery discharged to 2.6V.
@@ -1077,82 +1042,4 @@ bool Power::axpChipInit()
 #else
     return false;
 #endif
-}
-
-#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-
-/**
- * Wrapper class for an I2C MAX17048 Lipo battery sensor.
- */
-class LipoBatteryLevel : public HasBatteryLevel
-{
-  private:
-    MAX17048Singleton *max17048 = nullptr;
-
-  public:
-    /**
-     * Init the I2C MAX17048 Lipo battery level sensor
-     */
-    bool runOnce()
-    {
-        if (max17048 == nullptr) {
-            max17048 = MAX17048Singleton::GetInstance();
-        }
-
-        // try to start if the sensor has been detected
-        if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MAX17048].first != 0) {
-            return max17048->runOnce(nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MAX17048].second);
-        }
-        return false;
-    }
-
-    /**
-     * Battery state of charge, from 0 to 100 or -1 for unknown
-     */
-    virtual int getBatteryPercent() override { return max17048->getBusBatteryPercent(); }
-
-    /**
-     * The raw voltage of the battery in millivolts, or NAN if unknown
-     */
-    virtual uint16_t getBattVoltage() override { return max17048->getBusVoltageMv(); }
-
-    /**
-     * return true if there is a battery installed in this unit
-     */
-    virtual bool isBatteryConnect() override { return max17048->isBatteryConnected(); }
-
-    /**
-     * return true if there is an external power source detected
-     */
-    virtual bool isVbusIn() override { return max17048->isExternallyPowered(); }
-
-    /**
-     * return true if the battery is currently charging
-     */
-    virtual bool isCharging() override { return max17048->isBatteryCharging(); }
-};
-
-LipoBatteryLevel lipoLevel;
-
-/**
- * Init the Lipo battery level sensor
- */
-bool Power::lipoInit()
-{
-    bool result = lipoLevel.runOnce();
-    LOG_DEBUG("Power::lipoInit lipo sensor is %s", result ? "ready" : "not ready yet");
-    if (!result)
-        return false;
-    batteryLevel = &lipoLevel;
-    return true;
-}
-
-#else
-/**
- * The Lipo battery level sensor is unavailable - default to AnalogBatteryLevel
- */
-bool Power::lipoInit()
-{
-    return false;
-}
-#endif
+}

src/PowerFSM.cpp

@@ -53,7 +53,7 @@ static bool isPowered()
 
 static void sdsEnter()
 {
-    LOG_DEBUG("Enter state: SDS");
+    LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
@@ -62,7 +62,7 @@ extern Power *power;
 
 static void shutdownEnter()
 {
-    LOG_DEBUG("Enter state: SHUTDOWN");
+    LOG_DEBUG("Enter state: SHUTDOWN\n");
     power->shutdown();
 }
 
@@ -72,16 +72,16 @@ static uint32_t secsSlept;
 
 static void lsEnter()
 {
-    LOG_INFO("lsEnter begin, ls_secs=%u", config.power.ls_secs);
+    LOG_INFO("lsEnter begin, ls_secs=%u\n", config.power.ls_secs);
     screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
-    // LOG_INFO("lsEnter end");
+    // LOG_INFO("lsEnter end\n");
 }
 
 static void lsIdle()
 {
-    // LOG_INFO("lsIdle begin ls_secs=%u", getPref_ls_secs());
+    // LOG_INFO("lsIdle begin ls_secs=%u\n", getPref_ls_secs());
 
 #ifdef ARCH_ESP32
 
@@ -105,7 +105,7 @@ static void lsIdle()
                 wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
-                // LOG_INFO("sleeping, flash led!");
+                // LOG_INFO("sleeping, flash led!\n");
                 break;
 
             case ESP_SLEEP_WAKEUP_UART:
@@ -137,7 +137,7 @@ static void lsIdle()
     } else {
         // Time to stop sleeping!
         ledBlink.set(false);
-        LOG_INFO("Reached ls_secs, servicing loop()");
+        LOG_INFO("Reached ls_secs, servicing loop()\n");
         powerFSM.trigger(EVENT_WAKE_TIMER);
     }
 #endif
@@ -145,12 +145,12 @@ static void lsIdle()
 
 static void lsExit()
 {
-    LOG_INFO("Exit state: LS");
+    LOG_INFO("Exit state: LS\n");
 }
 
 static void nbEnter()
 {
-    LOG_DEBUG("Enter state: NB");
+    LOG_DEBUG("Enter state: NB\n");
     screen->setOn(false);
 #ifdef ARCH_ESP32
     // Only ESP32 should turn off bluetooth
@@ -168,7 +168,7 @@ static void darkEnter()
 
 static void serialEnter()
 {
-    LOG_DEBUG("Enter state: SERIAL");
+    LOG_DEBUG("Enter state: SERIAL\n");
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -183,10 +183,10 @@ static void serialExit()
 
 static void powerEnter()
 {
-    // LOG_DEBUG("Enter state: POWER");
+    // LOG_DEBUG("Enter state: POWER\n");
     if (!isPowered()) {
         // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
-        LOG_INFO("Loss of power in Powered");
+        LOG_INFO("Loss of power in Powered\n");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     } else {
         screen->setOn(true);
@@ -205,7 +205,7 @@ static void powerIdle()
 {
     if (!isPowered()) {
         // If we got here, we are in the wrong state
-        LOG_INFO("Loss of power in Powered");
+        LOG_INFO("Loss of power in Powered\n");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     }
 }
@@ -222,7 +222,7 @@ static void powerExit()
 
 static void onEnter()
 {
-    LOG_DEBUG("Enter state: ON");
+    LOG_DEBUG("Enter state: ON\n");
     screen->setOn(true);
     setBluetoothEnable(true);
 }
@@ -242,7 +242,7 @@ static void screenPress()
 
 static void bootEnter()
 {
-    LOG_DEBUG("Enter state: BOOT");
+    LOG_DEBUG("Enter state: BOOT\n");
 }
 
 State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN");
@@ -264,7 +264,7 @@ void PowerFSM_setup()
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
-    LOG_INFO("PowerFSM init, USB power=%d", hasPower ? 1 : 0);
+    LOG_INFO("PowerFSM init, USB power=%d\n", hasPower ? 1 : 0);
     powerFSM.add_timed_transition(&stateBOOT, hasPower ? &statePOWER : &stateON, 3 * 1000, NULL, "boot timeout");
 
     // wake timer expired or a packet arrived

src/PowerMon.cpp

@@ -35,7 +35,7 @@ void PowerMon::emitLog(const char *reason)
 {
 #ifdef USE_POWERMON
     // The nrf52 printf doesn't understand 64 bit ints, so if we ever reach that point this function will need to change.
-    LOG_INFO("S:PM:0x%08lx,%s", (uint32_t)states, reason);
+    LOG_INFO("S:PM:0x%08lx,%s\n", (uint32_t)states, reason);
 #endif
 }
 

src/PowerStatus.h

@@ -91,7 +91,7 @@ class PowerStatus : public Status
             isCharging = newStatus->isCharging;
         }
         if (isDirty) {
-            // LOG_DEBUG("Battery %dmV %d%%", batteryVoltageMv, batteryChargePercent);
+            // LOG_DEBUG("Battery %dmV %d%%\n", batteryVoltageMv, batteryChargePercent);
             onNewStatus.notifyObservers(this);
         }
         return 0;

src/RedirectablePrint.cpp

@@ -98,75 +98,81 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
 {
     size_t r = 0;
 
+    // Cope with 0 len format strings, but look for new line terminator
+    bool hasNewline = *format && format[strlen(format) - 1] == '\n';
 #ifdef ARCH_PORTDUINO
     bool color = !settingsMap[ascii_logs];
 #else
     bool color = true;
 #endif
 
-    // include the header
-    if (color) {
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
-            Print::write("\u001b[34m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
-            Print::write("\u001b[32m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
-            Print::write("\u001b[33m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_ERROR) == 0)
-            Print::write("\u001b[31m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0)
-            Print::write("\u001b[35m", 6);
-    }
+    // If we are the first message on a report, include the header
+    if (!isContinuationMessage) {
+        if (color) {
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
+                Print::write("\u001b[34m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
+                Print::write("\u001b[32m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
+                Print::write("\u001b[33m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_ERROR) == 0)
+                Print::write("\u001b[31m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0)
+                Print::write("\u001b[35m", 6);
+        }
 
-    uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // display local time on logfile
-    if (rtc_sec > 0) {
-        long hms = rtc_sec % SEC_PER_DAY;
-        // hms += tz.tz_dsttime * SEC_PER_HOUR;
-        // hms -= tz.tz_minuteswest * SEC_PER_MIN;
-        // mod `hms` to ensure in positive range of [0...SEC_PER_DAY)
-        hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
+        uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // display local time on logfile
+        if (rtc_sec > 0) {
+            long hms = rtc_sec % SEC_PER_DAY;
+            // hms += tz.tz_dsttime * SEC_PER_HOUR;
+            // hms -= tz.tz_minuteswest * SEC_PER_MIN;
+            // mod `hms` to ensure in positive range of [0...SEC_PER_DAY)
+            hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
 
-        // Tear apart hms into h:m:s
-        int hour = hms / SEC_PER_HOUR;
-        int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
-        int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
+            // Tear apart hms into h:m:s
+            int hour = hms / SEC_PER_HOUR;
+            int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
+            int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
 #ifdef ARCH_PORTDUINO
-        ::printf("%s ", logLevel);
-        if (color) {
-            ::printf("\u001b[0m");
-        }
-        ::printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
+            ::printf("%s ", logLevel);
+            if (color) {
+                ::printf("\u001b[0m");
+            }
+            ::printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
 #else
-        printf("%s ", logLevel);
-        if (color) {
-            printf("\u001b[0m");
-        }
-        printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
+            printf("%s ", logLevel);
+            if (color) {
+                printf("\u001b[0m");
+            }
+            printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
 #endif
-    } else {
+        } else {
 #ifdef ARCH_PORTDUINO
-        ::printf("%s ", logLevel);
-        if (color) {
-            ::printf("\u001b[0m");
-        }
-        ::printf("| ??:??:?? %u ", millis() / 1000);
+            ::printf("%s ", logLevel);
+            if (color) {
+                ::printf("\u001b[0m");
+            }
+            ::printf("| ??:??:?? %u ", millis() / 1000);
 #else
-        printf("%s ", logLevel);
-        if (color) {
-            printf("\u001b[0m");
-        }
-        printf("| ??:??:?? %u ", millis() / 1000);
+            printf("%s ", logLevel);
+            if (color) {
+                printf("\u001b[0m");
+            }
+            printf("| ??:??:?? %u ", millis() / 1000);
 #endif
-    }
-    auto thread = concurrency::OSThread::currentThread;
-    if (thread) {
-        print("[");
-        // printf("%p ", thread);
-        // assert(thread->ThreadName.length());
-        print(thread->ThreadName);
-        print("] ");
+        }
+        auto thread = concurrency::OSThread::currentThread;
+        if (thread) {
+            print("[");
+            // printf("%p ", thread);
+            // assert(thread->ThreadName.length());
+            print(thread->ThreadName);
+            print("] ");
+        }
     }
     r += vprintf(logLevel, format, arg);
+
+    isContinuationMessage = !hasNewline;
 }
 
 void RedirectablePrint::log_to_syslog(const char *logLevel, const char *format, va_list arg)
@@ -277,14 +283,6 @@ meshtastic_LogRecord_Level RedirectablePrint::getLogLevel(const char *logLevel)
 
 void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
-
-    // append \n to format
-    size_t len = strlen(format);
-    char *newFormat = new char[len + 2];
-    strcpy(newFormat, format);
-    newFormat[len] = '\n';
-    newFormat[len + 1] = '\0';
-
 #if ARCH_PORTDUINO
     // level trace is special, two possible ways to handle it.
     if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
@@ -297,24 +295,17 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
             }
             va_end(arg);
         }
-        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
-            delete[] newFormat;
+        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0)
             return;
-        }
     }
-    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
-        delete[] newFormat;
+    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
         return;
-    } else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0) {
-        delete[] newFormat;
+    else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
         return;
-    } else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0) {
-        delete[] newFormat;
+    else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
         return;
-    }
 #endif
     if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
-        delete[] newFormat;
         return;
     }
 
@@ -328,9 +319,9 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
         va_list arg;
         va_start(arg, format);
 
-        log_to_serial(logLevel, newFormat, arg);
-        log_to_syslog(logLevel, newFormat, arg);
-        log_to_ble(logLevel, newFormat, arg);
+        log_to_serial(logLevel, format, arg);
+        log_to_syslog(logLevel, format, arg);
+        log_to_ble(logLevel, format, arg);
 
         va_end(arg);
 #ifdef HAS_FREE_RTOS
@@ -340,18 +331,17 @@ void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 #endif
     }
 
-    delete[] newFormat;
     return;
 }
 
 void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16_t len)
 {
     const char alphabet[17] = "0123456789abcdef";
-    log(logLevel, "    +------------------------------------------------+ +----------------+");
-    log(logLevel, "    |.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 .a .b .c .d .e .f | |      ASCII     |");
+    log(logLevel, "    +------------------------------------------------+ +----------------+\n");
+    log(logLevel, "    |.0 .1 .2 .3 .4 .5 .6 .7 .8 .9 .a .b .c .d .e .f | |      ASCII     |\n");
     for (uint16_t i = 0; i < len; i += 16) {
         if (i % 128 == 0)
-            log(logLevel, "    +------------------------------------------------+ +----------------+");
+            log(logLevel, "    +------------------------------------------------+ +----------------+\n");
         char s[] = "|                                                | |                |\n";
         uint8_t ix = 1, iy = 52;
         for (uint8_t j = 0; j < 16; j++) {
@@ -373,7 +363,7 @@ void RedirectablePrint::hexDump(const char *logLevel, unsigned char *buf, uint16
         log(logLevel, ".");
         log(logLevel, s);
     }
-    log(logLevel, "    +------------------------------------------------+ +----------------+");
+    log(logLevel, "    +------------------------------------------------+ +----------------+\n");
 }
 
 std::string RedirectablePrint::mt_sprintf(const std::string fmt_str, ...)

src/RedirectablePrint.h

@@ -15,6 +15,9 @@ class RedirectablePrint : public Print
 {
     Print *dest;
 
+    /// Used to allow multiple logDebug messages to appear on a single log line
+    bool isContinuationMessage = false;
+
 #ifdef HAS_FREE_RTOS
     SemaphoreHandle_t inDebugPrint = nullptr;
     StaticSemaphore_t _MutexStorageSpace;
@@ -51,9 +54,9 @@ class RedirectablePrint : public Print
   protected:
     /// Subclasses can override if they need to change how we format over the serial port
     virtual void log_to_serial(const char *logLevel, const char *format, va_list arg);
-    meshtastic_LogRecord_Level getLogLevel(const char *logLevel);
 
   private:
     void log_to_syslog(const char *logLevel, const char *format, va_list arg);
     void log_to_ble(const char *logLevel, const char *format, va_list arg);
+    meshtastic_LogRecord_Level getLogLevel(const char *logLevel);
 };

src/SafeFile.cpp

@@ -59,14 +59,14 @@ bool SafeFile::close()
 
     // brief window of risk here ;-)
     if (fullAtomic && FSCom.exists(filename.c_str()) && !FSCom.remove(filename.c_str())) {
-        LOG_ERROR("Can't remove old pref file");
+        LOG_ERROR("Can't remove old pref file\n");
         return false;
     }
 
     String filenameTmp = filename;
     filenameTmp += ".tmp";
     if (!renameFile(filenameTmp.c_str(), filename.c_str())) {
-        LOG_ERROR("Error: can't rename new pref file");
+        LOG_ERROR("Error: can't rename new pref file\n");
         return false;
     }
 
@@ -83,7 +83,7 @@ bool SafeFile::testReadback()
     filenameTmp += ".tmp";
     auto f2 = FSCom.open(filenameTmp.c_str(), FILE_O_READ);
     if (!f2) {
-        LOG_ERROR("Can't open tmp file for readback");
+        LOG_ERROR("Can't open tmp file for readback\n");
         return false;
     }
 
@@ -95,7 +95,7 @@ bool SafeFile::testReadback()
     f2.close();
 
     if (test_hash != hash) {
-        LOG_ERROR("Readback failed hash mismatch");
+        LOG_ERROR("Readback failed hash mismatch\n");
         return false;
     }
 

src/SafeFile.h

@@ -24,7 +24,7 @@
 class SafeFile : public Print
 {
   public:
-    explicit SafeFile(char const *filepath, bool fullAtomic = false);
+    SafeFile(char const *filepath, bool fullAtomic = false);
 
     virtual size_t write(uint8_t);
     virtual size_t write(const uint8_t *buffer, size_t size);

src/SerialConsole.cpp

@@ -1,8 +1,6 @@
 #include "SerialConsole.h"
-#include "Default.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
-#include "Throttle.h"
 #include "configuration.h"
 #include "time.h"
 
@@ -46,11 +44,10 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
     Port.setRX(SERIAL2_RX);
 #endif
     Port.begin(SERIAL_BAUD);
-#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040) ||   \
-    defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32C6)
+#if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
     time_t timeout = millis();
     while (!Port) {
-        if (Throttle::isWithinTimespanMs(timeout, FIVE_SECONDS_MS)) {
+        if ((millis() - timeout) < 5000) {
             delay(100);
         } else {
             break;
@@ -75,7 +72,8 @@ void SerialConsole::flush()
 // For the serial port we can't really detect if any client is on the other side, so instead just look for recent messages
 bool SerialConsole::checkIsConnected()
 {
-    return Throttle::isWithinTimespanMs(lastContactMsec, SERIAL_CONNECTION_TIMEOUT);
+    uint32_t now = millis();
+    return (now - lastContactMsec) < SERIAL_CONNECTION_TIMEOUT;
 }
 
 /**
@@ -99,9 +97,27 @@ bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 void SerialConsole::log_to_serial(const char *logLevel, const char *format, va_list arg)
 {
     if (usingProtobufs && config.security.debug_log_api_enabled) {
-        meshtastic_LogRecord_Level ll = RedirectablePrint::getLogLevel(logLevel);
+        meshtastic_LogRecord_Level ll = meshtastic_LogRecord_Level_UNSET; // default to unset
+        switch (logLevel[0]) {
+        case 'D':
+            ll = meshtastic_LogRecord_Level_DEBUG;
+            break;
+        case 'I':
+            ll = meshtastic_LogRecord_Level_INFO;
+            break;
+        case 'W':
+            ll = meshtastic_LogRecord_Level_WARNING;
+            break;
+        case 'E':
+            ll = meshtastic_LogRecord_Level_ERROR;
+            break;
+        case 'C':
+            ll = meshtastic_LogRecord_Level_CRITICAL;
+            break;
+        }
+
         auto thread = concurrency::OSThread::currentThread;
         emitLogRecord(ll, thread ? thread->ThreadName.c_str() : "", format, arg);
     } else
         RedirectablePrint::log_to_serial(logLevel, format, arg);
-}
+}

src/airtime.cpp

@@ -13,17 +13,17 @@ void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms)
 {
 
     if (reportType == TX_LOG) {
-        LOG_DEBUG("Packet transmitted : %ums", airtime_ms);
+        LOG_DEBUG("AirTime - Packet transmitted : %ums\n", airtime_ms);
         this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms;
         air_period_tx[0] = air_period_tx[0] + airtime_ms;
 
         this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms;
     } else if (reportType == RX_LOG) {
-        LOG_DEBUG("Packet received : %ums", airtime_ms);
+        LOG_DEBUG("AirTime - Packet received : %ums\n", airtime_ms);
         this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms;
         air_period_rx[0] = air_period_rx[0] + airtime_ms;
     } else if (reportType == RX_ALL_LOG) {
-        LOG_DEBUG("Packet received (noise?) : %ums", airtime_ms);
+        LOG_DEBUG("AirTime - Packet received (noise?) : %ums\n", airtime_ms);
         this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms;
     }
 
@@ -50,7 +50,7 @@ void AirTime::airtimeRotatePeriod()
 {
 
     if (this->airtimes.lastPeriodIndex != this->currentPeriodIndex()) {
-        LOG_DEBUG("Rotating airtimes to a new period = %u", this->currentPeriodIndex());
+        LOG_DEBUG("Rotating airtimes to a new period = %u\n", this->currentPeriodIndex());
 
         for (int i = PERIODS_TO_LOG - 2; i >= 0; --i) {
             this->airtimes.periodTX[i + 1] = this->airtimes.periodTX[i];
@@ -105,7 +105,7 @@ float AirTime::channelUtilizationPercent()
     uint32_t sum = 0;
     for (uint32_t i = 0; i < CHANNEL_UTILIZATION_PERIODS; i++) {
         sum += this->channelUtilization[i];
-        // LOG_DEBUG("ChanUtilArray %u %u", i, this->channelUtilization[i]);
+        // LOG_DEBUG("ChanUtilArray %u %u\n", i, this->channelUtilization[i]);
     }
 
     return (float(sum) / float(CHANNEL_UTILIZATION_PERIODS * 10 * 1000)) * 100;
@@ -127,7 +127,7 @@ bool AirTime::isTxAllowedChannelUtil(bool polite)
     if (channelUtilizationPercent() < percentage) {
         return true;
     } else {
-        LOG_WARN("Channel utilization is >%d percent. Skipping this opportunity to send.", percentage);
+        LOG_WARN("Channel utilization is >%d percent. Skipping this opportunity to send.\n", percentage);
         return false;
     }
 }
@@ -138,7 +138,7 @@ bool AirTime::isTxAllowedAirUtil()
         if (utilizationTXPercent() < myRegion->dutyCycle * polite_duty_cycle_percent / 100) {
             return true;
         } else {
-            LOG_WARN("Tx air utilization is >%f percent. Skipping this opportunity to send.",
+            LOG_WARN("Tx air utilization is >%f percent. Skipping this opportunity to send.\n",
                      myRegion->dutyCycle * polite_duty_cycle_percent / 100);
             return false;
         }
@@ -209,13 +209,13 @@ int32_t AirTime::runOnce()
         }
     }
     /*
-        LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%", utilPeriodTX, airTime->utilizationTXPercent());
+        LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%\n", utilPeriodTX, airTime->utilizationTXPercent());
         for (uint32_t i = 0; i < MINUTES_IN_HOUR; i++) {
             LOG_DEBUG(
                 "%d,", this->utilizationTX[i]
                 );
         }
-        LOG_DEBUG("");
+        LOG_DEBUG("\n");
     */
     return (1000 * 1);
 }

src/buzz/buzz.cpp

@@ -55,18 +55,6 @@ void playBeep()
     playTones(melody, sizeof(melody) / sizeof(ToneDuration));
 }
 
-void playGPSEnableBeep()
-{
-    ToneDuration melody[] = {{NOTE_C3, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_CS4, DURATION_1_4}};
-    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
-}
-
-void playGPSDisableBeep()
-{
-    ToneDuration melody[] = {{NOTE_CS4, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_C3, DURATION_1_4}};
-    playTones(melody, sizeof(melody) / sizeof(ToneDuration));
-}
-
 void playStartMelody()
 {
     ToneDuration melody[] = {{NOTE_FS3, DURATION_1_8}, {NOTE_AS3, DURATION_1_8}, {NOTE_CS4, DURATION_1_4}};

src/buzz/buzz.h

@@ -3,5 +3,3 @@
 void playBeep();
 void playStartMelody();
 void playShutdownMelody();
-void playGPSEnableBeep();
-void playGPSDisableBeep();

src/concurrency/InterruptableDelay.cpp

@@ -18,7 +18,7 @@ bool InterruptableDelay::delay(uint32_t msec)
     // sem take will return false if we timed out (i.e. were not interrupted)
     bool r = semaphore.take(msec);
 
-    // LOG_DEBUG("interrupt=%d", r);
+    // LOG_DEBUG("interrupt=%d\n", r);
     return !r;
 }
 

src/concurrency/NotifiedWorkerThread.cpp

@@ -32,12 +32,12 @@ IRAM_ATTR bool NotifiedWorkerThread::notifyCommon(uint32_t v, bool overwrite)
 
         notification = v;
         if (debugNotification) {
-            LOG_DEBUG("setting notification %d", v);
+            LOG_DEBUG("setting notification %d\n", v);
         }
         return true;
     } else {
         if (debugNotification) {
-            LOG_DEBUG("dropping notification %d", v);
+            LOG_DEBUG("dropping notification %d\n", v);
         }
         return false;
     }
@@ -67,7 +67,7 @@ bool NotifiedWorkerThread::notifyLater(uint32_t delay, uint32_t v, bool overwrit
     if (didIt) {                   // If we didn't already have something queued, override the delay to be larger
         setIntervalFromNow(delay); // a new version of setInterval relative to the current time
         if (debugNotification) {
-            LOG_DEBUG("delaying notification %u", delay);
+            LOG_DEBUG("delaying notification %u\n", delay);
         }
     }
 

src/concurrency/OSThread.cpp

@@ -62,15 +62,15 @@ bool OSThread::shouldRun(unsigned long time)
     bool r = Thread::shouldRun(time);
 
     if (showRun && r) {
-        LOG_DEBUG("Thread %s: run", ThreadName.c_str());
+        LOG_DEBUG("Thread %s: run\n", ThreadName.c_str());
     }
 
     if (showWaiting && enabled && !r) {
-        LOG_DEBUG("Thread %s: wait %lu", ThreadName.c_str(), interval);
+        LOG_DEBUG("Thread %s: wait %lu\n", ThreadName.c_str(), interval);
     }
 
     if (showDisabled && !enabled) {
-        LOG_DEBUG("Thread %s: disabled", ThreadName.c_str());
+        LOG_DEBUG("Thread %s: disabled\n", ThreadName.c_str());
     }
 
     return r;
@@ -86,9 +86,9 @@ void OSThread::run()
 #ifdef DEBUG_HEAP
     auto newHeap = memGet.getFreeHeap();
     if (newHeap < heap)
-        LOG_DEBUG("------ Thread %s leaked heap %d -> %d (%d) ------", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_DEBUG("------ Thread %s leaked heap %d -> %d (%d) ------\n", ThreadName.c_str(), heap, newHeap, newHeap - heap);
     if (heap < newHeap)
-        LOG_DEBUG("++++++ Thread %s freed heap %d -> %d (%d) ++++++", ThreadName.c_str(), heap, newHeap, newHeap - heap);
+        LOG_DEBUG("++++++ Thread %s freed heap %d -> %d (%d) ++++++\n", ThreadName.c_str(), heap, newHeap, newHeap - heap);
 #endif
 
     runned();

src/configuration.h

@@ -69,9 +69,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef RTC_DATA_ATTR
 #define RTC_DATA_ATTR
 #endif
-#ifndef EXT_RAM_BSS_ATTR
-#define EXT_RAM_BSS_ATTR EXT_RAM_ATTR
-#endif
 
 // -----------------------------------------------------------------------------
 // Regulatory overrides
@@ -114,7 +111,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define CARDKB_ADDR 0x5F
 #define TDECK_KB_ADDR 0x55
 #define BBQ10_KB_ADDR 0x1F
-#define MPR121_KB_ADDR 0x5A
 
 // -----------------------------------------------------------------------------
 // SENSOR
@@ -126,17 +122,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define INA_ADDR_ALTERNATE 0x41
 #define INA_ADDR_WAVESHARE_UPS 0x43
 #define INA3221_ADDR 0x42
-#define MAX1704X_ADDR 0x36
 #define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
-#define QMC5883L_ADDR 0x0D
-#define HMC5883L_ADDR 0x1E
+#define QMC5883L_ADDR 0x1E
 #define SHTC3_ADDR 0x70
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
 #define SHT31_4x_ADDR 0x44
 #define PMSA0031_ADDR 0x12
-#define QMA6100P_ADDR 0x12
 #define AHT10_ADDR 0x38
 #define RCWL9620_ADDR 0x57
 #define VEML7700_ADDR 0x10
@@ -146,20 +139,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MLX90632_ADDR 0x3A
 #define DFROBOT_LARK_ADDR 0x42
 #define NAU7802_ADDR 0x2A
-#define MAX30102_ADDR 0x57
-#define MLX90614_ADDR_DEF 0x5A
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
 // -----------------------------------------------------------------------------
 #define MPU6050_ADDR 0x68
-#define STK8BXX_ADR 0x18
 #define LIS3DH_ADR 0x18
 #define BMA423_ADDR 0x19
 #define LSM6DS3_ADDR 0x6A
 #define BMX160_ADDR 0x69
-#define ICM20948_ADDR 0x69
-#define ICM20948_ADDR_ALT 0x68
 
 // -----------------------------------------------------------------------------
 // LED
@@ -174,7 +162,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // IO Expander
 // -----------------------------------------------------------------------------
-#define TCA9535_ADDR 0x20
 #define TCA9555_ADDR 0x26
 
 // -----------------------------------------------------------------------------
@@ -184,16 +171,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define GPS_THREAD_INTERVAL 200
 #endif
 
-// -----------------------------------------------------------------------------
-// Touchscreen
-// -----------------------------------------------------------------------------
-#define FT6336U_ADDR 0x48
-
-// -----------------------------------------------------------------------------
-// BIAS-T Generator
-// -----------------------------------------------------------------------------
-#define TPS65233_ADDR 0x60
-
 // convert 24-bit color to 16-bit (56K)
 #define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
 
@@ -207,9 +184,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifndef GPS_BAUDRATE
 #define GPS_BAUDRATE 9600
-#define GPS_BAUDRATE_FIXED 0
-#else
-#define GPS_BAUDRATE_FIXED 1
 #endif
 
 /* Step #2: follow with defines common to the architecture;
@@ -228,16 +202,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MINIMUM_SAFE_FREE_HEAP 1500
 #endif
 
-#ifndef WIRE_INTERFACES_COUNT
-// Officially an NRF52 macro
-// Repurposed cross-platform to identify devices using Wire1
-#if defined(I2C_SDA1) || defined(PIN_WIRE1_SDA)
-#define WIRE_INTERFACES_COUNT 2
-#elif HAS_WIRE
-#define WIRE_INTERFACES_COUNT 1
-#endif
-#endif
-
 /* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
 
 #ifndef HAS_WIFI
@@ -360,4 +324,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 #include "DebugConfiguration.h"
-#include "RF95Configuration.h"
+#include "RF95Configuration.h"

src/detect/LoRaRadioType.h

@@ -10,8 +10,7 @@ enum LoRaRadioType {
     LLCC68_RADIO,
     SX1280_RADIO,
     LR1110_RADIO,
-    LR1120_RADIO,
-    LR1121_RADIO
+    LR1120_RADIO
 };
 
 extern LoRaRadioType radioType;

src/detect/ScanI2C.cpp

@@ -31,14 +31,14 @@ ScanI2C::FoundDevice ScanI2C::firstRTC() const
 
 ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 {
-    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004, MPR121KB};
-    return firstOfOrNONE(5, types);
+    ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004};
+    return firstOfOrNONE(4, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P};
-    return firstOfOrNONE(8, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160};
+    return firstOfOrNONE(5, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const

src/detect/ScanI2C.h

@@ -28,7 +28,6 @@ class ScanI2C
         INA260,
         INA219,
         INA3221,
-        MAX17048,
         MCP9808,
         SHT31,
         SHT4X,
@@ -37,15 +36,12 @@ class ScanI2C
         QMC6310,
         QMI8658,
         QMC5883L,
-        HMC5883L,
         PMSA0031,
-        QMA6100P,
         MPU6050,
         LIS3DH,
         BMA423,
         BQ24295,
         LSM6DS3,
-        TCA9535,
         TCA9555,
         VEML7700,
         RCWL9620,
@@ -53,17 +49,11 @@ class ScanI2C
         TSL2591,
         OPT3001,
         MLX90632,
-        MLX90614,
         AHT10,
         BMX160,
         DFROBOT_LARK,
         NAU7802,
-        FT6336U,
-        STK8BAXX,
-        ICM20948,
-        MAX30102,
-        TPS65233,
-        MPR121KB
+        CUSTOM_SENSOR,
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;
@@ -74,9 +64,8 @@ class ScanI2C
     } I2CPort;
 
     typedef struct DeviceAddress {
-        // set default values for ADDRESS_NONE
-        I2CPort port = I2CPort::NO_I2C;
-        uint8_t address = 0;
+        I2CPort port;
+        uint8_t address;
 
         explicit DeviceAddress(I2CPort port, uint8_t address);
         DeviceAddress();

src/detect/ScanI2CTwoWire.cpp

@@ -7,8 +7,8 @@
 #include "linux/LinuxHardwareI2C.h"
 #endif
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
-#include "main.h"      // atecc
-#include "meshUtils.h" // vformat
+#include "I2CDefinitions.h"
+#include "main.h" // atecc
 #endif
 
 // AXP192 and AXP2101 have the same device address, we just need to identify it in Power.cpp
@@ -72,15 +72,15 @@ ScanI2C::DeviceType ScanI2CTwoWire::probeOLED(ScanI2C::DeviceAddress addr) const
         r &= 0x0f;
 
         if (r == 0x08 || r == 0x00) {
-            LOG_INFO("sh1106 display found");
+            LOG_INFO("sh1106 display found\n");
             o_probe = SCREEN_SH1106; // SH1106
         } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) {
-            LOG_INFO("ssd1306 display found");
+            LOG_INFO("ssd1306 display found\n");
             o_probe = SCREEN_SSD1306; // SSD1306
         }
         c++;
     } while ((r != r_prev) && (c < 4));
-    LOG_DEBUG("0x%x subtype probed in %i tries ", r, c);
+    LOG_DEBUG("0x%x subtype probed in %i tries \n", r, c);
 
     return o_probe;
 }
@@ -89,31 +89,31 @@ void ScanI2CTwoWire::printATECCInfo() const
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
     atecc.readConfigZone(false);
 
-    std::string atecc_numbers = "ATECC608B Serial Number: ";
+    LOG_DEBUG("ATECC608B Serial Number: ");
     for (int i = 0; i < 9; i++) {
-        atecc_numbers += vformat("%02x", atecc.serialNumber[i]);
+        LOG_DEBUG("%02x", atecc.serialNumber[i]);
     }
 
-    atecc_numbers += ", Rev Number: ";
+    LOG_DEBUG(", Rev Number: ");
     for (int i = 0; i < 4; i++) {
-        atecc_numbers += vformat("%02x", atecc.revisionNumber[i]);
+        LOG_DEBUG("%02x", atecc.revisionNumber[i]);
     }
-    LOG_DEBUG(atecc_numbers.c_str());
+    LOG_DEBUG("\n");
 
-    LOG_DEBUG("ATECC608B Config %s, Data %s, Slot 0 %s", atecc.configLockStatus ? "Locked" : "Unlocked",
-              atecc.dataOTPLockStatus ? "Locked" : "Unlocked", atecc.slot0LockStatus ? "Locked" : "Unlocked");
+    LOG_DEBUG("ATECC608B Config %s", atecc.configLockStatus ? "Locked" : "Unlocked");
+    LOG_DEBUG(", Data %s", atecc.dataOTPLockStatus ? "Locked" : "Unlocked");
+    LOG_DEBUG(", Slot 0 %s\n", atecc.slot0LockStatus ? "Locked" : "Unlocked");
 
-    std::string atecc_publickey = "";
     if (atecc.configLockStatus && atecc.dataOTPLockStatus && atecc.slot0LockStatus) {
         if (atecc.generatePublicKey() == false) {
-            atecc_publickey += "ATECC608B Error generating public key";
+            LOG_DEBUG("ATECC608B Error generating public key\n");
         } else {
-            atecc_publickey += "ATECC608B Public Key: ";
+            LOG_DEBUG("ATECC608B Public Key: ");
             for (int i = 0; i < 64; i++) {
-                atecc_publickey += vformat("%02x", atecc.publicKey64Bytes[i]);
+                LOG_DEBUG("%02x", atecc.publicKey64Bytes[i]);
             }
+            LOG_DEBUG("\n");
         }
-        LOG_DEBUG(atecc_publickey.c_str());
     }
 #endif
 }
@@ -129,7 +129,7 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation
     i2cBus->endTransmission();
     delay(20);
     i2cBus->requestFrom(registerLocation.i2cAddress.address, responseWidth);
-    LOG_DEBUG("Wire.available() = %d", i2cBus->available());
+    LOG_DEBUG("Wire.available() = %d\n", i2cBus->available());
     if (i2cBus->available() == 2) {
         // Read MSB, then LSB
         value = (uint16_t)i2cBus->read() << 8;
@@ -150,7 +150,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 {
     concurrency::LockGuard guard((concurrency::Lock *)&lock);
 
-    LOG_DEBUG("Scanning for I2C devices on port %d", port);
+    LOG_DEBUG("Scanning for I2C devices on port %d\n", port);
 
     uint8_t err;
 
@@ -163,30 +163,21 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
     Melopero_RV3028 rtc;
 #endif
 
-#if WIRE_INTERFACES_COUNT == 2
+#ifdef I2C_SDA1
     if (port == I2CPort::WIRE1) {
         i2cBus = &Wire1;
     } else {
 #endif
         i2cBus = &Wire;
-#if WIRE_INTERFACES_COUNT == 2
+#ifdef I2C_SDA1
     }
 #endif
 
-    // We only need to scan 112 addresses, the rest is reserved for special purposes
-    // 0x00 General Call
-    // 0x01 CBUS addresses
-    // 0x02 Reserved for different bus formats
-    // 0x03 Reserved for future purposes
-    // 0x04-0x07 High Speed Master Code
-    // 0x78-0x7B 10-bit slave addressing
-    // 0x7C-0x7F Reserved for future purposes
-
-    for (addr.address = 8; addr.address < 120; addr.address++) {
+    for (addr.address = 1; addr.address < 127; addr.address++) {
         if (asize != 0) {
             if (!in_array(address, asize, addr.address))
                 continue;
-            LOG_DEBUG("Scanning address 0x%x", addr.address);
+            LOG_DEBUG("Scanning address 0x%x\n", addr.address);
         }
         i2cBus->beginTransmission(addr.address);
 #ifdef ARCH_PORTDUINO
@@ -199,7 +190,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
         type = NONE;
         if (err == 0) {
-            LOG_DEBUG("I2C device found at address 0x%x", addr.address);
+            LOG_DEBUG("I2C device found at address 0x%x\n", addr.address);
 
             switch (addr.address) {
             case SSD1306_ADDRESS:
@@ -215,9 +206,9 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
                 {
-                    LOG_INFO("ATECC608B initialized");
+                    LOG_INFO("ATECC608B initialized\n");
                 } else {
-                    LOG_WARN("ATECC608B initialization failed");
+                    LOG_WARN("ATECC608B initialization failed\n");
                 }
                 printATECCInfo();
                 break;
@@ -227,7 +218,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case RV3028_RTC:
                 // foundDevices[addr] = RTC_RV3028;
                 type = RTC_RV3028;
-                LOG_INFO("RV3028 RTC found");
+                LOG_INFO("RV3028 RTC found\n");
                 rtc.initI2C(*i2cBus);
                 rtc.writeToRegister(0x35, 0x07); // no Clkout
                 rtc.writeToRegister(0x37, 0xB4);
@@ -235,7 +226,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 #endif
 
 #ifdef PCF8563_RTC
-                SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563 RTC found")
+                SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563 RTC found\n")
 #endif
 
             case CARDKB_ADDR:
@@ -243,50 +234,49 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1);
                 if (registerValue == 0x02) {
                     // KEYPAD_VERSION
-                    LOG_INFO("RAK14004 found");
+                    LOG_INFO("RAK14004 found\n");
                     type = RAK14004;
                 } else {
-                    LOG_INFO("m5 cardKB found");
+                    LOG_INFO("m5 cardKB found\n");
                     type = CARDKB;
                 }
                 break;
 
-                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard found");
-                SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10 keyboard found");
-
-                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found");
+                SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard found\n");
+                SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10 keyboard found\n");
+                SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found\n");
 #ifdef HAS_NCP5623
-                SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found");
+                SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found\n");
 #endif
 #ifdef HAS_PMU
-                SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found")
+                SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found\n")
 #endif
             case BME_ADDR:
             case BME_ADDR_ALTERNATE:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xD0), 1); // GET_ID
                 switch (registerValue) {
                 case 0x61:
-                    LOG_INFO("BME-680 sensor found at address 0x%x", (uint8_t)addr.address);
+                    LOG_INFO("BME-680 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = BME_680;
                     break;
                 case 0x60:
-                    LOG_INFO("BME-280 sensor found at address 0x%x", (uint8_t)addr.address);
+                    LOG_INFO("BME-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = BME_280;
                     break;
                 case 0x55:
-                    LOG_INFO("BMP-085 or BMP-180 sensor found at address 0x%x", (uint8_t)addr.address);
+                    LOG_INFO("BMP-085 or BMP-180 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = BMP_085;
                     break;
                 default:
                     registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // GET_ID
                     switch (registerValue) {
                     case 0x50: // BMP-388 should be 0x50
-                        LOG_INFO("BMP-388 sensor found at address 0x%x", (uint8_t)addr.address);
+                        LOG_INFO("BMP-388 sensor found at address 0x%x\n", (uint8_t)addr.address);
                         type = BMP_3XX;
                         break;
                     case 0x58: // BMP-280 should be 0x58
                     default:
-                        LOG_INFO("BMP-280 sensor found at address 0x%x", (uint8_t)addr.address);
+                        LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
                         type = BMP_280;
                         break;
                     }
@@ -295,7 +285,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 break;
 #ifndef HAS_NCP5623
             case AHT10_ADDR:
-                LOG_INFO("AHT10 sensor found at address 0x%x", (uint8_t)addr.address);
+                LOG_INFO("AHT10 sensor found at address 0x%x\n", (uint8_t)addr.address);
                 type = AHT10;
                 break;
 #endif
@@ -303,161 +293,98 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case INA_ADDR_ALTERNATE:
             case INA_ADDR_WAVESHARE_UPS:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
-                LOG_DEBUG("Register MFG_UID: 0x%x", registerValue);
+                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
                 if (registerValue == 0x5449) {
-                    LOG_INFO("INA260 sensor found at address 0x%x", (uint8_t)addr.address);
+                    LOG_INFO("INA260 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = INA260;
                 } else { // Assume INA219 if INA260 ID is not found
-                    LOG_INFO("INA219 sensor found at address 0x%x", (uint8_t)addr.address);
+                    LOG_INFO("INA219 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = INA219;
                 }
                 break;
             case INA3221_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
-                LOG_DEBUG("Register MFG_UID: 0x%x", registerValue);
+                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
                 if (registerValue == 0x5449) {
-                    LOG_INFO("INA3221 sensor found at address 0x%x", (uint8_t)addr.address);
+                    LOG_INFO("INA3221 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = INA3221;
                 } else {
-                    LOG_INFO("DFRobot Lark weather station found at address 0x%x", (uint8_t)addr.address);
+                    LOG_INFO("DFRobot Lark weather station found at address 0x%x\n", (uint8_t)addr.address);
                     type = DFROBOT_LARK;
                 }
                 break;
             case MCP9808_ADDR:
-                // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some
-                // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips.
-                {
-                    // Check register 0x00 for 0x8700 response to ID STK8BA53 chip.
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 2);
-                    if (registerValue == 0x8700) {
-                        type = STK8BAXX;
-                        LOG_INFO("STK8BAXX accelerometer found");
-                        break;
-                    }
-
-                    // Check register 0x07 for 0x0400 response to ID MCP9808 chip.
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
-                    if (registerValue == 0x0400) {
-                        type = MCP9808;
-                        LOG_INFO("MCP9808 sensor found");
-                        break;
-                    }
-
-                    // Check register 0x0F for 0x3300 response to ID LIS3DH chip.
-                    registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2);
-                    if (registerValue == 0x3300 || registerValue == 0x3333) { // RAK4631 WisBlock has LIS3DH register at 0x3333
-                        type = LIS3DH;
-                        LOG_INFO("LIS3DH accelerometer found");
-                    }
-                    break;
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
+                if (registerValue == 0x0400) {
+                    type = MCP9808;
+                    LOG_INFO("MCP9808 sensor found\n");
+                } else {
+                    type = LIS3DH;
+                    LOG_INFO("LIS3DH accelerometer found\n");
                 }
+
+                break;
+
             case SHT31_4x_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
                 if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c) {
                     type = SHT4X;
-                    LOG_INFO("SHT4X sensor found");
+                    LOG_INFO("SHT4X sensor found\n");
                 } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
                     type = OPT3001;
-                    LOG_INFO("OPT3001 light sensor found");
+                    LOG_INFO("OPT3001 light sensor found\n");
                 } else {
                     type = SHT31;
-                    LOG_INFO("SHT31 sensor found");
+                    LOG_INFO("SHT31 sensor found\n");
                 }
 
                 break;
 
-                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3 sensor found")
-            case RCWL9620_ADDR:
-                // get MAX30102 PARTID
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 1);
-                if (registerValue == 0x15) {
-                    type = MAX30102;
-                    LOG_INFO("MAX30102 Health sensor found");
-                    break;
-                } else {
-                    type = RCWL9620;
-                    LOG_INFO("RCWL9620 sensor found");
-                }
-                break;
+                SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3 sensor found\n")
+                SCAN_SIMPLE_CASE(RCWL9620_ADDR, RCWL9620, "RCWL9620 sensor found\n")
 
             case LPS22HB_ADDR_ALT:
-                SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found")
+                SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found\n")
 
-                SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found")
+                SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found\n")
 
             case QMI8658_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0A), 1); // get ID
                 if (registerValue == 0xC0) {
                     type = BQ24295;
-                    LOG_INFO("BQ24295 PMU found");
+                    LOG_INFO("BQ24295 PMU found\n");
                     break;
                 }
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
                 if (registerValue == 0x6A) {
                     type = LSM6DS3;
-                    LOG_INFO("LSM6DS3 accelerometer found at address 0x%x", (uint8_t)addr.address);
+                    LOG_INFO("LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
                 } else {
                     type = QMI8658;
-                    LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found");
+                    LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found\n");
                 }
                 break;
 
-                SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found")
-                SCAN_SIMPLE_CASE(HMC5883L_ADDR, HMC5883L, "HMC5883L 3-Axis digital compass found")
-#ifdef HAS_QMA6100P
-                SCAN_SIMPLE_CASE(QMA6100P_ADDR, QMA6100P, "QMA6100P accelerometer found")
-#else
-                SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found")
-#endif
-                SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found");
-                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535 I2C expander found");
-                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found");
-                SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700 light sensor found");
-                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591 light sensor found");
-                SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001 light sensor found");
-                SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632 IR temp sensor found");
-                SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802 based scale found");
-                SCAN_SIMPLE_CASE(FT6336U_ADDR, FT6336U, "FT6336U touchscreen found");
-                SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048 lipo fuel gauge found");
-#ifdef HAS_TPS65233
-                SCAN_SIMPLE_CASE(TPS65233_ADDR, TPS65233, "TPS65233 BIAS-T found");
-#endif
+                SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found\n")
 
-            case MLX90614_ADDR_DEF:
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1);
-                if (registerValue == 0x5a) {
-                    type = MLX90614;
-                    LOG_INFO("MLX90614 IR temp sensor found");
-                } else {
-                    type = MPR121KB;
-                    LOG_INFO("MPR121KB keyboard found");
-                }
-                break;
-
-            case ICM20948_ADDR:     // same as BMX160_ADDR
-            case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
-                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
-                if (registerValue == 0xEA) {
-                    type = ICM20948;
-                    LOG_INFO("ICM20948 9-dof motion processor found");
-                    break;
-                } else if (addr.address == BMX160_ADDR) {
-                    type = BMX160;
-                    LOG_INFO("BMX160 accelerometer found");
-                    break;
-                } else {
-                    type = MPU6050;
-                    LOG_INFO("MPU6050 accelerometer found");
-                    break;
-                }
-                break;
+                SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
+                SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
+                SCAN_SIMPLE_CASE(BMX160_ADDR, BMX160, "BMX160 accelerometer found\n");
+                SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
+                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found\n");
+                SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700 light sensor found\n");
+                SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591 light sensor found\n");
+                SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001 light sensor found\n");
+                SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632 IR temp sensor found\n");
+                SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802 based scale found\n");
+                SCAN_SIMPLE_CASE(MT_I2C_ADDRESS, CUSTOM_SENSOR, "Meshtastic custom I2C sensor found\n");
 
             default:
-                LOG_INFO("Device found at address 0x%x was not able to be enumerated", addr.address);
+                LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);
             }
         } else if (err == 4) {
-            LOG_ERROR("Unknown error at address 0x%x", addr.address);
+            LOG_ERROR("Unknown error at address 0x%x\n", addr.address);
         }
 
         // Check if a type was found for the enumerated device - save, if so
@@ -478,7 +405,7 @@ TwoWire *ScanI2CTwoWire::fetchI2CBus(ScanI2C::DeviceAddress address) const
     if (address.port == ScanI2C::I2CPort::WIRE) {
         return &Wire;
     } else {
-#if WIRE_INTERFACES_COUNT == 2
+#ifdef I2C_SDA1
         return &Wire1;
 #else
         return &Wire;
@@ -490,4 +417,4 @@ size_t ScanI2CTwoWire::countDevices() const
 {
     return foundDevices.size();
 }
-#endif
+#endif

src/detect/axpDebug.h

@@ -0,0 +1,19 @@
+#if 0
+// Turn off for now
+uint32_t axpDebugRead()
+{
+  axp.debugCharging();
+  LOG_DEBUG("vbus current %f\n", axp.getVbusCurrent());
+  LOG_DEBUG("charge current %f\n", axp.getBattChargeCurrent());
+  LOG_DEBUG("bat voltage %f\n", axp.getBattVoltage());
+  LOG_DEBUG("batt pct %d\n", axp.getBattPercentage());
+  LOG_DEBUG("is battery connected %d\n", axp.isBatteryConnect());
+  LOG_DEBUG("is USB connected %d\n", axp.isVBUSPlug());
+  LOG_DEBUG("is charging %d\n", axp.isChargeing());
+
+  return 30 * 1000;
+}
+
+Periodic axpDebugOutput(axpDebugRead);
+axpDebugOutput.setup();
+#endif

src/detect/einkScan.h

@@ -59,9 +59,9 @@ void scanEInkDevice(void)
     d_writeCommand(0x20);
     eink_found = (d_waitWhileBusy(150) > 0) ? true : false;
     if (eink_found)
-        LOG_DEBUG("EInk display found");
+        LOG_DEBUG("EInk display found\n");
     else
-        LOG_DEBUG("EInk display not found");
+        LOG_DEBUG("EInk display not found\n");
     SPI1.end();
 }
 #endif