Ignore (from)Net time on positions with an unknown or fixed location source (#4593)

* Ignore (from)Net time on positions with an unknown or fixed location source

* Dunk a trunk

.devcontainer/Dockerfile

@@ -0,0 +1,25 @@
+FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
+
+# [Optional] Uncomment this section to install additional packages.
+RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
+    && apt-get -y install --no-install-recommends \
+    ca-certificates \
+    g++ \
+    git \
+    libbluetooth-dev \
+    libgpiod-dev \
+    liborcania-dev \
+    libssl-dev \
+    libulfius-dev \
+    libyaml-cpp-dev \
+    pipx \
+    pkg-config \
+    python3 \
+    python3-pip \
+    python3-venv \
+    python3-wheel \
+    wget \
+    zip \
+    && apt-get clean && rm -rf /var/lib/apt/lists/*
+
+RUN pipx install platformio==6.1.15

.devcontainer/devcontainer.json

@@ -0,0 +1,28 @@
+// For format details, see https://aka.ms/devcontainer.json. For config options, see the
+// README at: https://github.com/devcontainers/templates/tree/main/src/cpp
+{
+  "name": "Meshtastic Firmware Dev",
+  "build": {
+    "dockerfile": "Dockerfile"
+  },
+  "features": {
+    "ghcr.io/devcontainers/features/python:1": {
+      "installTools": true,
+      "version": "latest"
+    }
+  },
+  "customizations": {
+    "vscode": {
+      "extensions": [
+        "ms-vscode.cpptools",
+        "platformio.platformio-ide",
+      ]
+    }
+  },
+
+  // Use 'forwardPorts' to make a list of ports inside the container available locally.
+  "forwardPorts": [ 4403 ],
+
+  // Run commands to prepare the container for use
+  "postCreateCommand": ".devcontainer/setup.sh",
+}

.devcontainer/setup.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+git submodule update --init

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -52,6 +52,7 @@ body:
         - Raspberry Pi Pico (W)
         - Relay v1
         - Relay v2
+        - Seeed Wio Tracker 1110
         - DIY
         - Other
     validations:

.github/actions/setup-base/action.yml

@@ -11,10 +11,10 @@ runs:
         ref: ${{github.event.pull_request.head.ref}}
         repository: ${{github.event.pull_request.head.repo.full_name}}
 
-    - name: Install dependencies 
+    - name: Install dependencies
       shell: bash
       run: |
-        sudo apt-get -y update 
+        sudo apt-get -y update --fix-missing
         sudo apt-get install -y cppcheck libbluetooth-dev libgpiod-dev libyaml-cpp-dev
 
     - name: Setup Python
@@ -22,19 +22,21 @@ runs:
       with:
         python-version: 3.x
 
-    - name: Cache python libs
-      uses: actions/cache@v4
-      id: cache-pip # needed in if test
-      with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip
+    # - name: Cache python libs
+    #   uses: actions/cache@v4
+    #   id: cache-pip # needed in if test
+    #   with:
+    #     path: ~/.cache/pip
+    #     key: ${{ runner.os }}-pip
 
     - name: Upgrade python tools
       shell: bash
       run: |
         python -m pip install --upgrade pip
-        pip install -U platformio adafruit-nrfutil
-        pip install -U meshtastic --pre
+        pip install -U --no-build-isolation --no-cache-dir "setuptools<72"
+        pip install -U platformio adafruit-nrfutil --no-build-isolation
+        pip install -U poetry --no-build-isolation
+        pip install -U meshtastic --pre --no-build-isolation
 
     - name: Upgrade platformio
       shell: bash

.github/workflows/build_native.yml

@@ -13,7 +13,7 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          sudo apt-get update
+          sudo apt-get update --fix-missing
           sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code

.github/workflows/build_nrf52.yml

@@ -29,6 +29,7 @@ jobs:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
           overwrite: true
           path: |
+            release/*.hex
             release/*.uf2
             release/*.elf
             release/*.zip

.github/workflows/build_raspbian.yml

@@ -13,7 +13,7 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
-          apt-get update -y
+          apt-get update -y --fix-missing
           apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code

.github/workflows/build_raspbian_armv7l.yml

@@ -13,6 +13,7 @@ jobs:
       - name: Install libbluetooth
         shell: bash
         run: |
+          apt-get update -y --fix-missing
           apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
 
       - name: Checkout code

.github/workflows/build_stm32.yml

@@ -0,0 +1,33 @@
+name: Build STM32
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+jobs:
+  build-stm32:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Build STM32
+        run: bin/build-stm32.sh ${{ inputs.board }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.hex
+            release/*.bin

.github/workflows/main_matrix.yml

@@ -24,7 +24,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, check]
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, stm32, check]
     runs-on: ubuntu-latest
     steps:
       - id: checkout
@@ -41,6 +41,7 @@ jobs:
       esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
       nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
       rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      stm32: ${{ steps.jsonStep.outputs.stm32 }}
       check: ${{ steps.jsonStep.outputs.check }}
 
   check:
@@ -103,6 +104,15 @@ jobs:
     with:
       board: ${{ matrix.board }}
 
+  build-stm32:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.stm32) }}
+    uses: ./.github/workflows/build_stm32.yml
+    with:
+      board: ${{ matrix.board }}
+
   package-raspbian:
     uses: ./.github/workflows/package_raspbian.yml
 
@@ -134,9 +144,10 @@ jobs:
         build-esp32-c3,
         build-nrf52,
         build-rpi2040,
+        build-stm32,
         package-raspbian,
         package-raspbian-armv7l,
-        package-native
+        package-native,
       ]
     steps:
       - name: Checkout code
@@ -168,6 +179,7 @@ jobs:
           path: |
             ./firmware-*.bin
             ./firmware-*.uf2
+            ./firmware-*.hex
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat

.github/workflows/test_simulator.yml

@@ -0,0 +1,57 @@
+name: Test Simulator
+
+on:
+  schedule:
+    - cron: "0 0 * * *" # Run every day at midnight
+  workflow_dispatch: {}
+
+jobs:
+  test-simulator:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          sudo apt-get update --fix-missing
+          sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Native
+        run: bin/build-native.sh
+
+      # We now run integration test before other build steps (to quickly see runtime failures)
+      - name: Build for native
+        run: platformio run -e native
+
+      - name: Integration test
+        run: |
+          .pio/build/native/program & sleep 10 # 5 seconds was not enough
+          echo "Simulator started, launching python test..."
+          python3 -c 'from meshtastic.test import testSimulator; testSimulator()'
+
+      - name: PlatformIO Tests
+        run: platformio test -e native --junit-output-path testreport.xml
+
+      - name: Test Report
+        uses: dorny/test-reporter@v1.9.1
+        if: success() || failure() # run this step even if previous step failed
+        with:
+          name: PlatformIO Tests
+          path: testreport.xml
+          reporter: java-junit

.gitpod.yml

@@ -0,0 +1,2 @@
+tasks:
+  - init: pip install platformio && pip install --upgrade pip

.semgrepignore

@@ -1,2 +1,2 @@
 .github/workflows/main_matrix.yml
-src/mesh/compression/unishox2.c
+src/mesh/compression/unishox2.cpp

.trunk/trunk.yaml

@@ -1,36 +1,40 @@
 version: 0.1
 cli:
-  version: 1.22.1
+  version: 1.22.3
 plugins:
   sources:
     - id: trunk
-      ref: v1.5.0
+      ref: v1.6.2
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.76.3
+    - trufflehog@3.81.9
     - yamllint@1.35.1
-    - bandit@1.7.8
-    - checkov@3.2.95
+    - bandit@1.7.9
+    - checkov@3.2.238
     - terrascan@1.19.1
-    - trivy@0.51.1
+    - trivy@0.54.1
     #- trufflehog@3.63.2-rc0
-    - taplo@0.8.1
-    - ruff@0.4.4
+    - taplo@0.9.3
+    - ruff@0.6.2
     - isort@5.13.2
-    - markdownlint@0.40.0
-    - oxipng@9.1.1
+    - markdownlint@0.41.0
+    - oxipng@9.1.2
     - svgo@3.3.2
-    - actionlint@1.7.0
-    - flake8@7.0.0
+    - actionlint@1.7.1
+    - flake8@7.1.1
     - hadolint@2.12.0
     - shfmt@3.6.0
     - shellcheck@0.10.0
-    - black@24.4.2
+    - black@24.8.0
     - git-diff-check
-    - gitleaks@8.18.2
+    - gitleaks@8.18.4
     - clang-format@16.0.3
-    - prettier@3.2.5
+    - prettier@3.3.3
+  ignore:
+    - linters: [ALL]
+      paths:
+        - bin/**
 runtimes:
   enabled:
     - python@3.10.8

.vscode/extensions.json

@@ -2,8 +2,9 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-		"ms-vscode.cpptools",
-        "platformio.platformio-ide",
-        "trunk.io"
+        "platformio.platformio-ide"
     ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
 }

Dockerfile

@@ -7,8 +7,6 @@ ENV TZ=Etc/UTC
 # > At the moment, setting "LANG=C" on a Linux system *fundamentally breaks Python 3*, and that's not OK.
 ENV LANG C.UTF-8
 
-SHELL ["/bin/bash", "-o", "pipefail", "-c"]
-
 # Install build deps
 USER root
 
@@ -24,10 +22,10 @@ USER mesh
 
 WORKDIR /tmp/firmware
 RUN python3 -m venv /tmp/firmware 
-RUN source ./bin/activate && pip3 install --no-cache-dir -U platformio==6.1.14
+RUN bash -o pipefail -c "source bin/activate; pip3 install --no-cache-dir -U platformio==6.1.15"
 # trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
 COPY --chown=mesh:mesh . /tmp/firmware
-RUN source ./bin/activate && chmod +x /tmp/firmware/bin/build-native.sh && ./bin/build-native.sh
+RUN bash -o pipefail -c "source ./bin/activate && bash ./bin/build-native.sh"
 RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
 
 

arch/esp32/esp32.ini

@@ -48,6 +48,7 @@ lib_deps =
   https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587
   https://github.com/lewisxhe/XPowersLib.git#84b7373faea3118b6c37954d52f98b8a337148d6
   https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  rweather/Crypto@^0.4.0
 
 lib_ignore = 
   segger_rtt

arch/nrf52/cpp_overrides/lfs_util.h

@@ -0,0 +1,208 @@
+/*
+ * lfs utility functions
+ *
+ * Copyright (c) 2017, Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// MESHTASTIC/@geeksville note: This file is copied from the Adafruit nrf52 arduino lib.  And we use a special -include in
+// nrf52.ini to load it before EVERY file we do this hack because the default definitions for LFS_ASSERT are quite poor and we
+// don't want to fork the adafruit lib (again) and send in a PR that they probably won't merge anyways. This file might break if
+// they ever update lfs.util on their side, in which case we'll need to update this file to match their new version. The version
+// this is a copy from is almost exactly
+// https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/c25d93268a3b9c23e9a1ccfcaf9b208beca624ca/libraries/Adafruit_LittleFS/src/littlefs/lfs_util.h
+
+#ifndef LFS_UTIL_H
+#define LFS_UTIL_H
+
+// Users can override lfs_util.h with their own configuration by defining
+// LFS_CONFIG as a header file to include (-DLFS_CONFIG=lfs_config.h).
+//
+// If LFS_CONFIG is used, none of the default utils will be emitted and must be
+// provided by the config file. To start I would suggest copying lfs_util.h and
+// modifying as needed.
+#ifdef LFS_CONFIG
+#define LFS_STRINGIZE(x) LFS_STRINGIZE2(x)
+#define LFS_STRINGIZE2(x) #x
+#include LFS_STRINGIZE(LFS_CONFIG)
+#else
+
+// System includes
+#include <stdbool.h>
+#include <stdint.h>
+#include <string.h>
+
+#ifndef LFS_NO_MALLOC
+#include <stdlib.h>
+#endif
+#ifndef LFS_NO_ASSERT
+#include <assert.h>
+#endif
+
+#if !defined(LFS_NO_DEBUG) || !defined(LFS_NO_WARN) || !defined(LFS_NO_ERROR)
+#include <stdio.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Macros, may be replaced by system specific wrappers. Arguments to these
+// macros must not have side-effects as the macros can be removed for a smaller
+// code footprint
+
+// Logging functions
+#ifndef LFS_NO_DEBUG
+
+void logLegacy(const char *level, const char *fmt, ...);
+#define LFS_DEBUG(fmt, ...) logLegacy("DEBUG", "lfs debug:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_DEBUG(fmt, ...)
+#endif
+
+#ifndef LFS_NO_WARN
+#define LFS_WARN(fmt, ...) logLegacy("WARN", "lfs warn:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_WARN(fmt, ...)
+#endif
+
+#ifndef LFS_NO_ERROR
+#define LFS_ERROR(fmt, ...) logLegacy("ERROR", "lfs error:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_ERROR(fmt, ...)
+#endif
+
+// Runtime assertions
+#ifndef LFS_NO_ASSERT
+#define LFS_ASSERT(test) assert(test)
+#else
+extern void lfs_assert(const char *reason);
+#define LFS_ASSERT(test)                                                                                                         \
+    if (!(test))                                                                                                                 \
+    lfs_assert(#test)
+#endif
+
+// Builtin functions, these may be replaced by more efficient
+// toolchain-specific implementations. LFS_NO_INTRINSICS falls back to a more
+// expensive basic C implementation for debugging purposes
+
+// Min/max functions for unsigned 32-bit numbers
+static inline uint32_t lfs_max(uint32_t a, uint32_t b)
+{
+    return (a > b) ? a : b;
+}
+
+static inline uint32_t lfs_min(uint32_t a, uint32_t b)
+{
+    return (a < b) ? a : b;
+}
+
+// Find the next smallest power of 2 less than or equal to a
+static inline uint32_t lfs_npw2(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
+    return 32 - __builtin_clz(a - 1);
+#else
+    uint32_t r = 0;
+    uint32_t s;
+    a -= 1;
+    s = (a > 0xffff) << 4;
+    a >>= s;
+    r |= s;
+    s = (a > 0xff) << 3;
+    a >>= s;
+    r |= s;
+    s = (a > 0xf) << 2;
+    a >>= s;
+    r |= s;
+    s = (a > 0x3) << 1;
+    a >>= s;
+    r |= s;
+    return (r | (a >> 1)) + 1;
+#endif
+}
+
+// Count the number of trailing binary zeros in a
+// lfs_ctz(0) may be undefined
+static inline uint32_t lfs_ctz(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && defined(__GNUC__)
+    return __builtin_ctz(a);
+#else
+    return lfs_npw2((a & -a) + 1) - 1;
+#endif
+}
+
+// Count the number of binary ones in a
+static inline uint32_t lfs_popc(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
+    return __builtin_popcount(a);
+#else
+    a = a - ((a >> 1) & 0x55555555);
+    a = (a & 0x33333333) + ((a >> 2) & 0x33333333);
+    return (((a + (a >> 4)) & 0xf0f0f0f) * 0x1010101) >> 24;
+#endif
+}
+
+// Find the sequence comparison of a and b, this is the distance
+// between a and b ignoring overflow
+static inline int lfs_scmp(uint32_t a, uint32_t b)
+{
+    return (int)(unsigned)(a - b);
+}
+
+// Convert from 32-bit little-endian to native order
+static inline uint32_t lfs_fromle32(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_LITTLE_ENDIAN) ||                                \
+                                    (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_LITTLE_ENDIAN) ||                          \
+                                    (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__))
+    return a;
+#elif !defined(LFS_NO_INTRINSICS) &&                                                                                             \
+    ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_BIG_ENDIAN) || (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_BIG_ENDIAN) || \
+     (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__))
+    return __builtin_bswap32(a);
+#else
+    return (((uint8_t *)&a)[0] << 0) | (((uint8_t *)&a)[1] << 8) | (((uint8_t *)&a)[2] << 16) | (((uint8_t *)&a)[3] << 24);
+#endif
+}
+
+// Convert to 32-bit little-endian from native order
+static inline uint32_t lfs_tole32(uint32_t a)
+{
+    return lfs_fromle32(a);
+}
+
+// Calculate CRC-32 with polynomial = 0x04c11db7
+void lfs_crc(uint32_t *crc, const void *buffer, size_t size);
+
+// Allocate memory, only used if buffers are not provided to littlefs
+static inline void *lfs_malloc(size_t size)
+{
+#ifndef LFS_NO_MALLOC
+    extern void *pvPortMalloc(size_t xWantedSize);
+    return pvPortMalloc(size);
+#else
+    (void)size;
+    return NULL;
+#endif
+}
+
+// Deallocate memory, only used if buffers are not provided to littlefs
+static inline void lfs_free(void *p)
+{
+#ifndef LFS_NO_MALLOC
+    extern void vPortFree(void *pv);
+    vPortFree(p);
+#else
+    (void)p;
+#endif
+}
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif
+#endif

arch/nrf52/nrf52.ini

@@ -2,9 +2,13 @@
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
 platform = platformio/nordicnrf52@^10.5.0
 extends = arduino_base
+platform_packages =
+  ; our custom Git version until they merge our PR
+  framework-arduinoadafruitnrf52 @ https://github.com/geeksville/Adafruit_nRF52_Arduino.git
 
 build_type = debug
-build_flags = 
+build_flags =
+  -include arch/nrf52/cpp_overrides/lfs_util.h
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
@@ -16,6 +20,7 @@ build_src_filter =
 
 lib_deps=
   ${arduino_base.lib_deps}
+  rweather/Crypto@^0.4.0
 
 lib_ignore =
   BluetoothOTA

arch/nrf52/nrf52840.ini

@@ -7,3 +7,72 @@ lib_deps =
   ${nrf52_base.lib_deps}
   ${environmental_base.lib_deps}
   https://github.com/Kongduino/Adafruit_nRFCrypto.git#e31a8825ea3300b163a0a3c1ddd5de34e10e1371
+
+; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
+
+; We want the initial breakpoint at setup() instead of main().  Also we want to enable semihosting at that point so instead of
+debug_init_break = tbreak setup
+; we just turn off the platformio tbreak and do it in .gdbinit (where we have more flexibility for scripting)
+; also we use a permanent breakpoint so it gets reused each time we restart the debugging session?
+; debug_init_break = tbreak main
+
+; Note: add "monitor arm semihosting_redirect tcp 4444 all" if you want the stdout from the device to go to that port number instead
+; (for use by meshtastic command line)
+;  monitor arm semihosting disable
+;  monitor debug_level 3
+;
+; IMPORTANT: fileio must be disabled before using port 5555 - openocd ver 0.12 has a bug where if enabled it never properly parses the special :tt name
+; for stdio access.
+;   monitor arm semihosting_redirect tcp 5555 stdio
+
+; Also note: it is _impossible_ to do non blocking reads on the semihost console port (an oversight when ARM specified the semihost API).
+; So we'll neve be able to general purpose bi-directional communication with the device over semihosting.
+debug_extra_cmds =
+  echo Running .gdbinit script
+  ;monitor arm semihosting enable
+  ;monitor arm semihosting_fileio enable
+  ;monitor arm semihosting_redirect disable
+  commands 1
+  ; echo Breakpoint at setup() has semihosting console, connect to it with "telnet localhost 5555"
+  ; set wantSemihost = 1
+  set useSoftDevice = 0
+  end
+
+  ; Only reprogram the board if the code has changed
+debug_load_mode = modified
+;debug_load_mode = manual
+; We default to the stlink adapter because it is very cheap and works well, though others (such as jlink) are also supported.
+;debug_tool = jlink
+debug_tool = stlink
+debug_speed = 4000
+;debug_tool = custom
+; debug_server =
+;  openocd
+;  -f
+;  /usr/local/share/openocd/scripts/interface/stlink.cfg
+;  -f
+;  /usr/local/share/openocd/scripts/target/nrf52.cfg
+; $PLATFORMIO_CORE_DIR/packages/tool-openocd/openocd/scripts/interface/cmsis-dap.cfg
+
+; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
+; programming time is about the same as the bootloader version.
+; For information on this see the meshtastic developers documentation for "Development on the NRF52"
+; We manually pass in the elf file so that pyocd can reverse engineer FreeRTOS data (running threads, etc...)
+;debug_server =
+;  pyocd
+;  gdbserver
+;  -j
+;  ${platformio.workspace_dir}/..
+;  -t
+;  nrf52840
+;  --semihosting
+;  --elf
+;  ${platformio.build_dir}/${this.__env__}/firmware.elf
+
+; If you want to debug the semihosting support you can turn on extra logging in pyocd with
+;   -L
+;   pyocd.debug.semihost.trace=debug
+
+; The following is not needed because it automatically tries do this
+;debug_server_ready_pattern = -.*GDB server started on port \d+.*
+;debug_port = localhost:3333

arch/stm32/stm32.ini

@@ -0,0 +1,37 @@
+[stm32_base]
+extends = arduino_base
+platform = ststm32
+platform_packages = platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32.git#361a7fdb67e2a7104e99b4f42a802469eef8b129
+
+build_type = release
+
+;board_build.flash_offset = 0x08000000
+
+build_flags = 
+  ${arduino_base.build_flags}
+  -flto
+  -Isrc/platform/stm32wl -g
+  -DMESHTASTIC_MINIMIZE_BUILD
+  -DMESHTASTIC_EXCLUDE_GPS
+  -DDEBUG_MUTE
+;  -DVECT_TAB_OFFSET=0x08000000
+  -DconfigUSE_CMSIS_RTOS_V2=1
+;  -DSPI_MODE_0=SPI_MODE0
+  -fmerge-all-constants
+  -ffunction-sections
+  -fdata-sections
+  
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+
+lib_deps =
+  ${env.lib_deps}
+  charlesbaynham/OSFS@^1.2.3
+  https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e
+
+lib_ignore =
+  https://github.com/mathertel/OneButton@~2.6.1
+  Wire

arch/stm32/stm32wl5e.ini

@@ -1,28 +0,0 @@
-[stm32wl5e_base]
-platform_packages = platformio/framework-arduinoststm32 @ https://github.com/stm32duino/Arduino_Core_STM32.git#6e3f9910d0122e82a6c3438507dfac3d2fd80a39
-platform = ststm32
-board = generic_wl5e
-framework = arduino
-
-build_type = debug
-
-build_flags = 
-  ${arduino_base.build_flags}
-  -Isrc/platform/stm32wl -g
-  -DconfigUSE_CMSIS_RTOS_V2=1
-  -DVECT_TAB_OFFSET=0x08000000
-  
-build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
-
-board_upload.offset_address = 0x08000000
-upload_protocol = stlink
-
-lib_deps =
-  ${env.lib_deps}
-  https://github.com/kokke/tiny-AES-c.git#f06ac37fc31dfdaca2e0d9bec83f90d5663c319b
-  https://github.com/littlefs-project/littlefs.git#v2.5.1
-  https://github.com/stm32duino/STM32FreeRTOS.git#10.3.1
-
-lib_ignore =
-  mathertel/OneButton

bin/build-esp32.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-nrf52.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*
@@ -23,8 +23,10 @@ basename=firmware-$1-$VERSION
 
 pio run --environment $1 # -v
 SRCELF=.pio/build/$1/firmware.elf
-DFUPKG=.pio/build/$1/firmware.zip
 cp $SRCELF $OUTDIR/$basename.elf
+
+echo "Generating NRF52 dfu file"
+DFUPKG=.pio/build/$1/firmware.zip
 cp $DFUPKG $OUTDIR/$basename-ota.zip
 
 echo "Generating NRF52 uf2 file"
@@ -33,13 +35,19 @@ SRCHEX=.pio/build/$1/firmware.hex
 # if WM1110 target, merge hex with softdevice 7.3.0
 if (echo $1 | grep -q "wio-sdk-wm1110"); then
 	echo "Merging with softdevice"
-    sudo chmod +x ./bin/mergehex
-	bin/mergehex -m bin/s140_nrf52_7.3.0_softdevice.hex $SRCHEX -o .pio/build/$1/merged_fimware.hex
-	SRCHEX=.pio/build/$1/merged_fimware.hex
+	bin/mergehex -m bin/s140_nrf52_7.3.0_softdevice.hex $SRCHEX -o .pio/build/$1/$basename.hex
+	SRCHEX=.pio/build/$1/$basename.hex
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp $SRCHEX $OUTDIR
+	cp bin/*.uf2 $OUTDIR
+else
+	bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
+	cp bin/device-install.* $OUTDIR
+	cp bin/device-update.* $OUTDIR
+	cp bin/*.uf2 $OUTDIR
 fi
 
-bin/uf2conv.py $SRCHEX -c -o $OUTDIR/$basename.uf2 -f 0xADA52840
-
-cp bin/device-install.* $OUTDIR
-cp bin/device-update.* $OUTDIR
-cp bin/*.uf2 $OUTDIR
+if (echo $1 | grep -q "rak4631"); then
+	echo "Copying hex file"
+	cp .pio/build/$1/firmware.hex $OUTDIR/$basename.hex
+fi

bin/build-rpi2040.sh

@@ -11,7 +11,7 @@ rm -f $OUTDIR/firmware*
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update 
+platformio pkg update -e $1
 
 echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
 rm -f .pio/build/$1/firmware.*

bin/build-stm32.sh

@@ -0,0 +1,29 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=$(bin/buildinfo.py long)
+SHORT_VERSION=$(bin/buildinfo.py short)
+
+OUTDIR=release/
+
+rm -f $OUTDIR/firmware*
+rm -r $OUTDIR/* || true
+
+# Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
+platformio pkg update -e $1
+
+echo "Building for $1 with $PLATFORMIO_BUILD_FLAGS"
+rm -f .pio/build/$1/firmware.*
+
+# The shell vars the build tool expects to find
+export APP_VERSION=$VERSION
+
+basename=firmware-$1-$VERSION
+
+pio run --environment $1 # -v
+SRCELF=.pio/build/$1/firmware.elf
+cp $SRCELF $OUTDIR/$basename.elf
+
+SRCBIN=.pio/build/$1/firmware.bin
+cp $SRCBIN $OUTDIR/$basename.bin

bin/config-dist.yaml

@@ -54,6 +54,8 @@ Lora:
 
 #  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
 
+#  spiSpeed: 2000000
+
 ### Set gpio chip to use in /dev/. Defaults to 0.
 ### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
 #  gpiochip: 4
@@ -111,6 +113,9 @@ Display:
 #  Height: 320
 #  Rotate: true
 
+### You can also specify the spi device for the display to use
+# spidev: spidev0.0
+
 Touchscreen:
 ### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
 
@@ -126,15 +131,21 @@ Touchscreen:
 #  CS: 7
 #  IRQ: 17
 
-### Configure device for direct keyboard input
+### You can also specify the spi device for the touchscreen to use
+# spidev: spidev0.0
+
 
 Input:
+### Configure device for direct keyboard input
+
 #  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
 
 ###
 
 Logging:
   LogLevel: info # debug, info, warn, error
+#  TraceFile: /var/log/meshtasticd.json
+#  AsciiLogs: true     # default if not specified is !isatty() on stdout
 
 Webserver:
 #  Port: 443 # Port for Webserver & Webservices
@@ -142,3 +153,4 @@ Webserver:
 
 General:
   MaxNodes: 200
+  MaxMessageQueue: 100

bin/platformio-custom.py

@@ -1,3 +1,4 @@
+#!/usr/bin/env python3
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
@@ -78,6 +79,11 @@ if platform.name == "espressif32":
         # For newer ESP32 targets, using newlib nano works better.
         env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
 
+if platform.name == "nordicnrf52":
+    env.AddPostAction("$BUILD_DIR/${PROGNAME}.hex",
+                      env.VerboseAction(f"{sys.executable} ./bin/uf2conv.py $BUILD_DIR/firmware.hex -c -f 0xADA52840 -o $BUILD_DIR/firmware.uf2",
+                                        "Generating UF2 file"))
+
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"

bin/readprops.py

@@ -1,9 +1,5 @@
-
-
-import subprocess
 import configparser
-import traceback
-import sys
+import subprocess
 
 
 def readProps(prefsLoc):
@@ -11,27 +7,36 @@ def readProps(prefsLoc):
 
     config = configparser.RawConfigParser()
     config.read(prefsLoc)
-    version = dict(config.items('VERSION'))
-    verObj = dict(short = "{}.{}.{}".format(version["major"], version["minor"], version["build"]),
-        long = "unset")
+    version = dict(config.items("VERSION"))
+    verObj = dict(
+        short="{}.{}.{}".format(version["major"], version["minor"], version["build"]),
+        long="unset",
+    )
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
-        sha = subprocess.check_output(
-            ['git', 'rev-parse', '--short', 'HEAD']).decode("utf-8").strip()
-        isDirty = subprocess.check_output(
-            ['git', 'diff', 'HEAD']).decode("utf-8").strip()
+        sha = (
+            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
+            .decode("utf-8")
+            .strip()
+        )
+        isDirty = (
+            subprocess.check_output(["git", "diff", "HEAD"]).decode("utf-8").strip()
+        )
         suffix = sha
         # if isDirty:
         #     # short for 'dirty', we want to keep our verstrings source for protobuf reasons
         #     suffix = sha + "-d"
-        verObj['long'] = "{}.{}.{}.{}".format(
-            version["major"], version["minor"], version["build"], suffix)
+        verObj["long"] = "{}.{}.{}.{}".format(
+            version["major"], version["minor"], version["build"], suffix
+        )
     except:
         # print("Unexpected error:", sys.exc_info()[0])
         # traceback.print_exc()
-        verObj['long'] = verObj['short']
+        verObj["long"] = verObj["short"]
 
     # print("firmware version " + verStr)
     return verObj
+
+
 # print("path is" + ','.join(sys.path))

bin/uf2conv.py

@@ -1,39 +1,38 @@
 #!/usr/bin/env python3
-import sys
-import struct
-import subprocess
-import re
+import argparse
 import os
 import os.path
-import argparse
+import re
+import struct
+import subprocess
+import sys
 
-
-UF2_MAGIC_START0 = 0x0A324655 # "UF2\n"
-UF2_MAGIC_START1 = 0x9E5D5157 # Randomly selected
-UF2_MAGIC_END    = 0x0AB16F30 # Ditto
+UF2_MAGIC_START0 = 0x0A324655  # "UF2\n"
+UF2_MAGIC_START1 = 0x9E5D5157  # Randomly selected
+UF2_MAGIC_END = 0x0AB16F30  # Ditto
 
 families = {
-    'SAMD21': 0x68ed2b88,
-    'SAML21': 0x1851780a,
-    'SAMD51': 0x55114460,
-    'NRF52': 0x1b57745f,
-    'STM32F0': 0x647824b6,
-    'STM32F1': 0x5ee21072,
-    'STM32F2': 0x5d1a0a2e,
-    'STM32F3': 0x6b846188,
-    'STM32F4': 0x57755a57,
-    'STM32F7': 0x53b80f00,
-    'STM32G0': 0x300f5633,
-    'STM32G4': 0x4c71240a,
-    'STM32H7': 0x6db66082,
-    'STM32L0': 0x202e3a91,
-    'STM32L1': 0x1e1f432d,
-    'STM32L4': 0x00ff6919,
-    'STM32L5': 0x04240bdf,
-    'STM32WB': 0x70d16653,
-    'STM32WL': 0x21460ff0,
-    'ATMEGA32': 0x16573617,
-    'MIMXRT10XX': 0x4FB2D5BD
+    "SAMD21": 0x68ED2B88,
+    "SAML21": 0x1851780A,
+    "SAMD51": 0x55114460,
+    "NRF52": 0x1B57745F,
+    "STM32F0": 0x647824B6,
+    "STM32F1": 0x5EE21072,
+    "STM32F2": 0x5D1A0A2E,
+    "STM32F3": 0x6B846188,
+    "STM32F4": 0x57755A57,
+    "STM32F7": 0x53B80F00,
+    "STM32G0": 0x300F5633,
+    "STM32G4": 0x4C71240A,
+    "STM32H7": 0x6DB66082,
+    "STM32L0": 0x202E3A91,
+    "STM32L1": 0x1E1F432D,
+    "STM32L4": 0x00FF6919,
+    "STM32L5": 0x04240BDF,
+    "STM32WB": 0x70D16653,
+    "STM32WL": 0x21460FF0,
+    "ATMEGA32": 0x16573617,
+    "MIMXRT10XX": 0x4FB2D5BD,
 }
 
 INFO_FILE = "/INFO_UF2.TXT"
@@ -46,15 +45,17 @@ def is_uf2(buf):
     w = struct.unpack("<II", buf[0:8])
     return w[0] == UF2_MAGIC_START0 and w[1] == UF2_MAGIC_START1
 
+
 def is_hex(buf):
     try:
         w = buf[0:30].decode("utf-8")
     except UnicodeDecodeError:
         return False
-    if w[0] == ':' and re.match(b"^[:0-9a-fA-F\r\n]+$", buf):
+    if w[0] == ":" and re.match(b"^[:0-9a-fA-F\r\n]+$", buf):
         return True
     return False
 
+
 def convert_from_uf2(buf):
     global appstartaddr
     numblocks = len(buf) // 512
@@ -62,7 +63,7 @@ def convert_from_uf2(buf):
     outp = b""
     for blockno in range(numblocks):
         ptr = blockno * 512
-        block = buf[ptr:ptr + 512]
+        block = buf[ptr : ptr + 512]
         hd = struct.unpack(b"<IIIIIIII", block[0:32])
         if hd[0] != UF2_MAGIC_START0 or hd[1] != UF2_MAGIC_START1:
             print("Skipping block at " + ptr + "; bad magic")
@@ -80,7 +81,7 @@ def convert_from_uf2(buf):
         padding = newaddr - curraddr
         if padding < 0:
             assert False, "Block out of order at " + ptr
-        if padding > 10*1024*1024:
+        if padding > 10 * 1024 * 1024:
             assert False, "More than 10M of padding needed at " + ptr
         if padding % 4 != 0:
             assert False, "Non-word padding size at " + ptr
@@ -91,6 +92,7 @@ def convert_from_uf2(buf):
         curraddr = newaddr + datalen
     return outp
 
+
 def convert_to_carray(file_content):
     outp = "const unsigned char bindata[] __attribute__((aligned(16))) = {"
     for i in range(len(file_content)):
@@ -100,6 +102,7 @@ def convert_to_carray(file_content):
     outp += "\n};\n"
     return outp
 
+
 def convert_to_uf2(file_content):
     global familyid
     datapadding = b""
@@ -109,13 +112,21 @@ def convert_to_uf2(file_content):
     outp = b""
     for blockno in range(numblocks):
         ptr = 256 * blockno
-        chunk = file_content[ptr:ptr + 256]
+        chunk = file_content[ptr : ptr + 256]
         flags = 0x0
         if familyid:
             flags |= 0x2000
-        hd = struct.pack(b"<IIIIIIII",
-            UF2_MAGIC_START0, UF2_MAGIC_START1,
-            flags, ptr + appstartaddr, 256, blockno, numblocks, familyid)
+        hd = struct.pack(
+            b"<IIIIIIII",
+            UF2_MAGIC_START0,
+            UF2_MAGIC_START1,
+            flags,
+            ptr + appstartaddr,
+            256,
+            blockno,
+            numblocks,
+            familyid,
+        )
         while len(chunk) < 256:
             chunk += b"\x00"
         block = hd + chunk + datapadding + struct.pack(b"<I", UF2_MAGIC_END)
@@ -123,6 +134,7 @@ def convert_to_uf2(file_content):
         outp += block
     return outp
 
+
 class Block:
     def __init__(self, addr):
         self.addr = addr
@@ -133,35 +145,44 @@ class Block:
         flags = 0x0
         if familyid:
             flags |= 0x2000
-        hd = struct.pack("<IIIIIIII",
-            UF2_MAGIC_START0, UF2_MAGIC_START1,
-            flags, self.addr, 256, blockno, numblocks, familyid)
+        hd = struct.pack(
+            "<IIIIIIII",
+            UF2_MAGIC_START0,
+            UF2_MAGIC_START1,
+            flags,
+            self.addr,
+            256,
+            blockno,
+            numblocks,
+            familyid,
+        )
         hd += self.bytes[0:256]
         while len(hd) < 512 - 4:
             hd += b"\x00"
         hd += struct.pack("<I", UF2_MAGIC_END)
         return hd
 
+
 def convert_from_hex_to_uf2(buf):
     global appstartaddr
     appstartaddr = None
     upper = 0
     currblock = None
     blocks = []
-    for line in buf.split('\n'):
+    for line in buf.split("\n"):
         if line[0] != ":":
             continue
         i = 1
         rec = []
         while i < len(line) - 1:
-            rec.append(int(line[i:i+2], 16))
+            rec.append(int(line[i : i + 2], 16))
             i += 2
         tp = rec[3]
         if tp == 4:
             upper = ((rec[4] << 8) | rec[5]) << 16
         elif tp == 2:
             upper = ((rec[4] << 8) | rec[5]) << 4
-            assert (upper & 0xffff) == 0
+            assert (upper & 0xFFFF) == 0
         elif tp == 1:
             break
         elif tp == 0:
@@ -170,10 +191,10 @@ def convert_from_hex_to_uf2(buf):
                 appstartaddr = addr
             i = 4
             while i < len(rec) - 1:
-                if not currblock or currblock.addr & ~0xff != addr & ~0xff:
-                    currblock = Block(addr & ~0xff)
+                if not currblock or currblock.addr & ~0xFF != addr & ~0xFF:
+                    currblock = Block(addr & ~0xFF)
                     blocks.append(currblock)
-                currblock.bytes[addr & 0xff] = rec[i]
+                currblock.bytes[addr & 0xFF] = rec[i]
                 addr += 1
                 i += 1
     numblocks = len(blocks)
@@ -182,17 +203,28 @@ def convert_from_hex_to_uf2(buf):
         resfile += blocks[i].encode(i, numblocks)
     return resfile
 
+
 def to_str(b):
     return b.decode("utf-8")
 
+
 def get_drives():
     drives = []
     if sys.platform == "win32":
-        r = subprocess.check_output(["wmic", "PATH", "Win32_LogicalDisk",
-                                     "get", "DeviceID,", "VolumeName,",
-                                     "FileSystem,", "DriveType"])
-        for line in to_str(r).split('\n'):
-            words = re.split('\s+', line)
+        r = subprocess.check_output(
+            [
+                "wmic",
+                "PATH",
+                "Win32_LogicalDisk",
+                "get",
+                "DeviceID,",
+                "VolumeName,",
+                "FileSystem,",
+                "DriveType",
+            ]
+        )
+        for line in to_str(r).split("\n"):
+            words = re.split("\\s+", line)
             if len(words) >= 3 and words[1] == "2" and words[2] == "FAT":
                 drives.append(words[0])
     else:
@@ -206,7 +238,6 @@ def get_drives():
         for d in os.listdir(rootpath):
             drives.append(os.path.join(rootpath, d))
 
-
     def has_info(d):
         try:
             return os.path.isfile(d + INFO_FILE)
@@ -217,7 +248,7 @@ def get_drives():
 
 
 def board_id(path):
-    with open(path + INFO_FILE, mode='r') as file:
+    with open(path + INFO_FILE, mode="r") as file:
         file_content = file.read()
     return re.search("Board-ID: ([^\r\n]*)", file_content).group(1)
 
@@ -235,30 +266,61 @@ def write_file(name, buf):
 
 def main():
     global appstartaddr, familyid
+
     def error(msg):
         print(msg)
         sys.exit(1)
-    parser = argparse.ArgumentParser(description='Convert to UF2 or flash directly.')
-    parser.add_argument('input', metavar='INPUT', type=str, nargs='?',
-                        help='input file (HEX, BIN or UF2)')
-    parser.add_argument('-b' , '--base', dest='base', type=str,
-                        default="0x2000",
-                        help='set base address of application for BIN format (default: 0x2000)')
-    parser.add_argument('-o' , '--output', metavar="FILE", dest='output', type=str,
-                        help='write output to named file; defaults to "flash.uf2" or "flash.bin" where sensible')
-    parser.add_argument('-d' , '--device', dest="device_path",
-                        help='select a device path to flash')
-    parser.add_argument('-l' , '--list', action='store_true',
-                        help='list connected devices')
-    parser.add_argument('-c' , '--convert', action='store_true',
-                        help='do not flash, just convert')
-    parser.add_argument('-D' , '--deploy', action='store_true',
-                        help='just flash, do not convert')
-    parser.add_argument('-f' , '--family', dest='family', type=str,
-                        default="0x0",
-                        help='specify familyID - number or name (default: 0x0)')
-    parser.add_argument('-C' , '--carray', action='store_true',
-                        help='convert binary file to a C array, not UF2')
+
+    parser = argparse.ArgumentParser(description="Convert to UF2 or flash directly.")
+    parser.add_argument(
+        "input",
+        metavar="INPUT",
+        type=str,
+        nargs="?",
+        help="input file (HEX, BIN or UF2)",
+    )
+    parser.add_argument(
+        "-b",
+        "--base",
+        dest="base",
+        type=str,
+        default="0x2000",
+        help="set base address of application for BIN format (default: 0x2000)",
+    )
+    parser.add_argument(
+        "-o",
+        "--output",
+        metavar="FILE",
+        dest="output",
+        type=str,
+        help='write output to named file; defaults to "flash.uf2" or "flash.bin" where sensible',
+    )
+    parser.add_argument(
+        "-d", "--device", dest="device_path", help="select a device path to flash"
+    )
+    parser.add_argument(
+        "-l", "--list", action="store_true", help="list connected devices"
+    )
+    parser.add_argument(
+        "-c", "--convert", action="store_true", help="do not flash, just convert"
+    )
+    parser.add_argument(
+        "-D", "--deploy", action="store_true", help="just flash, do not convert"
+    )
+    parser.add_argument(
+        "-f",
+        "--family",
+        dest="family",
+        type=str,
+        default="0x0",
+        help="specify familyID - number or name (default: 0x0)",
+    )
+    parser.add_argument(
+        "-C",
+        "--carray",
+        action="store_true",
+        help="convert binary file to a C array, not UF2",
+    )
     args = parser.parse_args()
     appstartaddr = int(args.base, 0)
 
@@ -268,14 +330,17 @@ def main():
         try:
             familyid = int(args.family, 0)
         except ValueError:
-            error("Family ID needs to be a number or one of: " + ", ".join(families.keys()))
+            error(
+                "Family ID needs to be a number or one of: "
+                + ", ".join(families.keys())
+            )
 
     if args.list:
         list_drives()
     else:
         if not args.input:
             error("Need input file")
-        with open(args.input, mode='rb') as f:
+        with open(args.input, mode="rb") as f:
             inpbuf = f.read()
         from_uf2 = is_uf2(inpbuf)
         ext = "uf2"
@@ -291,8 +356,10 @@ def main():
             ext = "h"
         else:
             outbuf = convert_to_uf2(inpbuf)
-        print("Converting to %s, output size: %d, start address: 0x%x" %
-              (ext, len(outbuf), appstartaddr))
+        print(
+            "Converting to %s, output size: %d, start address: 0x%x"
+            % (ext, len(outbuf), appstartaddr)
+        )
         if args.convert or ext != "uf2":
             drives = []
             if args.output == None:

bin/wio_tracker_bootloader_update.bin

@@ -0,0 +1,30 @@
+# tips from mark on how to replace the (broken) bootloader on the red wio_tracker_1110 boards.
+
+~/.platformio/penv/bin/adafruit-nrfutil --verbose dfu serial --package wio_tracker_1110_bootloader-0.9.1_s140_7.3.0.zip -p /dev/ttyACM1 -b 115200 --singlebank --touch 1200
+
+exit
+
+# Output should look like
+
+Upgrading target on /dev/ttyACM1 with DFU package /home/kevinh/development/meshtastic/WioWM1110/wio_tracker_1110_bootloader-0.9.1_s140_7.3.0.zip. Flow control is disabled, Single bank, Touch 1200
+Touched serial port /dev/ttyACM1
+Opened serial port /dev/ttyACM1
+Starting DFU upgrade of type 3, SoftDevice size: 152728, bootloader size: 39000, application size: 0
+Sending DFU start packet
+Sending DFU init packet
+Sending firmware file
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+########################################
+###############
+Activating new firmware
+
+DFU upgrade took 20.242434978485107s
+Device programmed.
+

boards/CDEBYTE_EoRa-S3.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "CDEBYTE_EoRa-S3"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/ESP32-S3-WROOM-1-N4.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "ESP32-S3-WROOM-1-N4"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "default_tool": "esp-builtin",
     "onboard_tools": ["esp-builtin"],

boards/heltec_mesh_node_t114.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "HT-n5262",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_node_t114",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "FIXME",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_e213.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "heltec_vision_master_e213"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Vision Master E213",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/vision-master-e213/",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_e290.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "heltec_vision_master_e290"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Vision Master E290",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/vision-master-e290/",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_t190.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "heltec_vision_master_t190"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Vision Master t190",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/vision-master-t190/",
+  "vendor": "Heltec"
+}

boards/me25ls01-4y10td.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "ME25LS01-BOOT",
+    "mcu": "nrf52840",
+    "variant": "MINEWSEMI_ME25LS01",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Minesemi ME25LS01",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/lr1110-nrf52840-me25LS01l",
+  "vendor": "Minesemi"
+}

boards/ms24sf1.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "MS24SF1-BOOT",
+    "mcu": "nrf52840",
+    "variant": "MINEWSEMI_MS24SF1_SX1262",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "MINEWSEMI_MS24SF1_SX1262",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://en.minewsemi.com/lora-module/nrf52840-sx1262-ms24sf1",
+  "vendor": "Minesemi"
+}

boards/tlora-t3s3-v1.json

@@ -19,7 +19,7 @@
     "mcu": "esp32s3",
     "variant": "tlora-t3s3-v1"
   },
-  "connectivity": ["wifi"],
+  "connectivity": ["wifi", "bluetooth"],
   "debug": {
     "openocd_target": "esp32s3.cfg"
   },

boards/tracker-t1000-e.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "T1000-E-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_T1000-E",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed T1000-E",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/SenseCAP-Card-Tracker-T1000-E-for-Meshtastic-p-5913.html",
+  "vendor": "Seeed Studio"
+}

boards/wio-t1000-s.json

@@ -0,0 +1,58 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v7.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_WIO_WM1110 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "WIO-BOOT",
+    "mcu": "nrf52840",
+    "variant": "Seeed_WIO_WM1110",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "7.3.0",
+      "sd_fwid": "0x0123"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "Seeed WIO WM1110",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": [
+      "jlink",
+      "nrfjprog",
+      "nrfutil",
+      "stlink",
+      "cmsis-dap",
+      "blackmagic"
+    ],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.seeedstudio.com/LoRaWAN-Tracker-c-1938.html",
+  "vendor": "Seeed Studio"
+}

boards/wiscore_rak3172.json

@@ -1,5 +1,8 @@
 {
   "build": {
+    "arduino": {
+      "variant_h": "variant_RAK3172_MODULE.h"
+    },
     "core": "stm32",
     "cpu": "cortex-m4",
     "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",

extra_scripts/disable_adafruit_usb.py

@@ -5,16 +5,24 @@ Import("env")
 
 # NOTE: This is not currently used, but can serve as an example on how to write extra_scripts
 
-print("Current CLI targets", COMMAND_LINE_TARGETS)
-print("Current Build targets", BUILD_TARGETS)
-print("CPP defs", env.get("CPPDEFINES"))
+# print("Current CLI targets", COMMAND_LINE_TARGETS)
+# print("Current Build targets", BUILD_TARGETS)
+# print("CPP defs", env.get("CPPDEFINES"))
+# print(env.Dump())
 
 # Adafruit.py in the platformio build tree is a bit naive and always enables their USB stack for building.  We don't want this.
 # So come in after that python script has run and disable it.  This hack avoids us having to fork that big project and send in a PR
 # which might not be accepted. -@geeksville
 
-env["CPPDEFINES"].remove("USBCON")
-env["CPPDEFINES"].remove("USE_TINYUSB")
+lib_builders = env.get("__PIO_LIB_BUILDERS", None)
+if lib_builders is not None:
+    print("Disabling Adafruit USB stack")
+    for k in lib_builders:
+        if k.name == "Adafruit TinyUSB Library":
+            libenv = k.env
+            # print(f"{k.name }: { libenv.Dump() } ")
+            # libenv["CPPDEFINES"].remove("USBCON")
+            libenv["CPPDEFINES"].remove("USE_TINYUSB")
 
 # Custom actions when building program/firmware
 # env.AddPreAction("buildprog", callback...)

monitor/filter_c3_exception_decoder.py

@@ -18,10 +18,7 @@ import subprocess
 import sys
 
 from platformio.project.exception import PlatformioException
-from platformio.public import (
-    DeviceMonitorFilterBase,
-    load_build_metadata,
-)
+from platformio.public import DeviceMonitorFilterBase, load_build_metadata
 
 # By design, __init__ is called inside miniterm and we can't pass context to it.
 # pylint: disable=attribute-defined-outside-init
@@ -32,7 +29,7 @@ IS_WINDOWS = sys.platform.startswith("win")
 class Esp32C3ExceptionDecoder(DeviceMonitorFilterBase):
     NAME = "esp32_c3_exception_decoder"
 
-    PCADDR_PATTERN = re.compile(r'0x4[0-9a-f]{7}', re.IGNORECASE)
+    PCADDR_PATTERN = re.compile(r"0x4[0-9a-f]{7}", re.IGNORECASE)
 
     def __call__(self):
         self.buffer = ""
@@ -75,14 +72,14 @@ See https://docs.platformio.org/page/projectconf/build_configurations.html
                         % self.__class__.__name__
                     )
                     return False
-                
+
             if not os.path.isfile(self.addr2line_path):
                 sys.stderr.write(
                     "%s: disabling, addr2line at %s does not exist\n"
                     % (self.__class__.__name__, self.addr2line_path)
                 )
                 return False
-                
+
             return True
         except PlatformioException as e:
             sys.stderr.write(
@@ -117,7 +114,7 @@ See https://docs.platformio.org/page/projectconf/build_configurations.html
 
                 trace = self.get_backtrace(m)
                 if len(trace) != "":
-                    text = text[: last] + trace + text[last :]
+                    text = text[:last] + trace + text[last:]
                     last += len(trace)
 
         return text
@@ -125,14 +122,10 @@ See https://docs.platformio.org/page/projectconf/build_configurations.html
     def get_backtrace(self, match):
         trace = "\n"
         enc = "mbcs" if IS_WINDOWS else "utf-8"
-        args = [self.addr2line_path, u"-fipC", u"-e", self.firmware_path]
+        args = [self.addr2line_path, "-fipC", "-e", self.firmware_path]
         try:
             addr = match.group()
-            output = (
-                subprocess.check_output(args + [addr])
-                .decode(enc)
-                .strip()
-            )
+            output = subprocess.check_output(args + [addr]).decode(enc).strip()
             output = output.replace(
                 "\n", "\n     "
             )  # newlines happen with inlined methods

platformio.ini

@@ -34,13 +34,19 @@ default_envs = tbeam
 ;default_envs = wio-e5
 ;default_envs = radiomaster_900_bandit_nano
 ;default_envs = radiomaster_900_bandit_micro
+;default_envs = radiomaster_900_bandit
 ;default_envs = heltec_capsule_sensor_v3
+;default_envs = heltec_vision_master_t190
+;default_envs = heltec_vision_master_e213
+;default_envs = heltec_vision_master_e290
+;default_envs = heltec_mesh_node_t114
 
 extra_configs =
   arch/*/*.ini
   variants/*/platformio.ini
 
 [env]
+test_build_src = true
 extra_scripts = bin/platformio-custom.py
 
 ; note: we add src to our include search path so that lmic_project_config can override
@@ -75,6 +81,7 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_APRS
   -DRADIOLIB_EXCLUDE_LORAWAN
   -DMESHTASTIC_EXCLUDE_DROPZONE=1
+  ;-D OLED_PL
 
 monitor_speed = 115200
 monitor_filters = direct
@@ -82,7 +89,7 @@ monitor_filters = direct
 lib_deps =
   jgromes/RadioLib@~6.6.0
   https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306
-  mathertel/OneButton@^2.5.0 ; OneButton library for non-blocking button debounce
+  https://github.com/mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
   https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
   https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0

src/AmbientLightingThread.h

@@ -1,3 +1,4 @@
+#include "Observer.h"
 #include "configuration.h"
 
 #ifdef HAS_NCP5623
@@ -22,10 +23,18 @@ class AmbientLightingThread : public concurrency::OSThread
   public:
     explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread")
     {
+        notifyDeepSleepObserver.observe(&notifyDeepSleep); // Let us know when shutdown() is issued.
+
+// Enables Ambient Lighting by default if conditions are meet.
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
+#ifdef ENABLE_AMBIENTLIGHTING
+        moduleConfig.ambient_lighting.led_state = true;
+#endif
+#endif
         // Uncomment to test module
         // moduleConfig.ambient_lighting.led_state = true;
         // moduleConfig.ambient_lighting.current = 10;
-        // // Default to a color based on our node number
+        // Default to a color based on our node number
         // moduleConfig.ambient_lighting.red = (myNodeInfo.my_node_num & 0xFF0000) >> 16;
         // moduleConfig.ambient_lighting.green = (myNodeInfo.my_node_num & 0x00FF00) >> 8;
         // moduleConfig.ambient_lighting.blue = myNodeInfo.my_node_num & 0x0000FF;
@@ -82,9 +91,46 @@ class AmbientLightingThread : public concurrency::OSThread
         return disable();
     }
 
+    // When shutdown() is issued, setLightingOff will be called.
+    CallbackObserver<AmbientLightingThread, void *> notifyDeepSleepObserver =
+        CallbackObserver<AmbientLightingThread, void *>(this, &AmbientLightingThread::setLightingOff);
+
   private:
     ScanI2C::DeviceType _type = ScanI2C::DeviceType::NONE;
 
+    // Turn RGB lighting off, is used in junction to shutdown()
+    int setLightingOff(void *unused)
+    {
+#ifdef HAS_NCP5623
+        rgb.setCurrent(0);
+        rgb.setRed(0);
+        rgb.setGreen(0);
+        rgb.setBlue(0);
+        LOG_INFO("Turn Off NCP5623 Ambient lighting.\n");
+#endif
+#ifdef HAS_NEOPIXEL
+        pixels.clear();
+        pixels.show();
+        LOG_INFO("Turn Off NeoPixel Ambient lighting.\n");
+#endif
+#ifdef RGBLED_CA
+        analogWrite(RGBLED_RED, 255 - 0);
+        analogWrite(RGBLED_GREEN, 255 - 0);
+        analogWrite(RGBLED_BLUE, 255 - 0);
+        LOG_INFO("Turn Off Ambient lighting RGB Common Anode.\n");
+#elif defined(RGBLED_RED)
+        analogWrite(RGBLED_RED, 0);
+        analogWrite(RGBLED_GREEN, 0);
+        analogWrite(RGBLED_BLUE, 0);
+        LOG_INFO("Turn Off Ambient lighting RGB Common Cathode.\n");
+#endif
+#ifdef UNPHONE
+        unphone.rgb(0, 0, 0);
+        LOG_INFO("Turn Off unPhone Ambient lighting.\n");
+#endif
+        return 0;
+    }
+
     void setLighting()
     {
 #ifdef HAS_NCP5623
@@ -100,6 +146,17 @@ class AmbientLightingThread : public concurrency::OSThread
         pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                                  moduleConfig.ambient_lighting.blue),
                     0, NEOPIXEL_COUNT);
+
+// RadioMaster Bandit has addressable LED at the two buttons
+// this allow us to set different lighting for them in variant.h file.
+#ifdef RADIOMASTER_900_BANDIT
+#if defined(BUTTON1_COLOR) && defined(BUTTON1_COLOR_INDEX)
+        pixels.fill(BUTTON1_COLOR, BUTTON1_COLOR_INDEX, 1);
+#endif
+#if defined(BUTTON2_COLOR) && defined(BUTTON2_COLOR_INDEX)
+        pixels.fill(BUTTON2_COLOR, BUTTON1_COLOR_INDEX, 1);
+#endif
+#endif
         pixels.show();
         LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,

src/ButtonThread.cpp

@@ -29,7 +29,6 @@ volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BU
 #if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
 OneButton ButtonThread::userButton; // Get reference to static member
 #endif
-
 ButtonThread::ButtonThread() : OSThread("Button")
 {
 #if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
@@ -43,6 +42,8 @@ ButtonThread::ButtonThread() : OSThread("Button")
     int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
 #if defined(HELTEC_CAPSULE_SENSOR_V3)
     this->userButton = OneButton(pin, false, false);
+#elif defined(BUTTON_ACTIVE_LOW)
+    this->userButton = OneButton(pin, BUTTON_ACTIVE_LOW, BUTTON_ACTIVE_PULLUP);
 #else
     this->userButton = OneButton(pin, true, true);
 #endif
@@ -51,8 +52,12 @@ ButtonThread::ButtonThread() : OSThread("Button")
 
 #ifdef INPUT_PULLUP_SENSE
     // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
+#ifdef BUTTON_SENSE_TYPE
+    pinMode(pin, BUTTON_SENSE_TYPE);
+#else
     pinMode(pin, INPUT_PULLUP_SENSE);
 #endif
+#endif
 
 #if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
     userButton.attachClick(userButtonPressed);
@@ -139,8 +144,8 @@ int32_t ButtonThread::runOnce()
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
             LOG_BUTTON("Double press!\n");
-            service.refreshLocalMeshNode();
-            auto sentPosition = service.trySendPosition(NODENUM_BROADCAST, true);
+            service->refreshLocalMeshNode();
+            auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
             if (screen) {
                 if (sentPosition)
                     screen->print("Sent ad-hoc position\n");
@@ -219,7 +224,6 @@ int32_t ButtonThread::runOnce()
         btnEvent = BUTTON_EVENT_NONE;
     }
 
-    runASAP = false;
     return 50;
 }
 

src/ButtonThread.h

@@ -13,7 +13,7 @@
 #endif
 
 #ifndef BUTTON_TOUCH_MS
-#define BUTTON_TOCH_MS 400
+#define BUTTON_TOUCH_MS 400
 #endif
 
 class ButtonThread : public concurrency::OSThread

src/DebugConfiguration.cpp

@@ -26,6 +26,20 @@ SOFTWARE.*/
 
 #include "DebugConfiguration.h"
 
+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
+/// A C wrapper for LOG_DEBUG that can be used from arduino C libs that don't know about C++ or meshtastic
+extern "C" void logLegacy(const char *level, const char *fmt, ...)
+{
+    va_list args;
+    va_start(args, fmt);
+    if (console)
+        console->vprintf(level, fmt, args);
+    va_end(args);
+}
+
 #if HAS_NETWORKING
 
 Syslog::Syslog(UDP &client)
@@ -129,6 +143,11 @@ bool Syslog::vlogf(uint16_t pri, const char *appName, const char *fmt, va_list a
 inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *message)
 {
     int result;
+#ifdef ARCH_PORTDUINO
+    bool utf = !settingsMap[ascii_logs];
+#else
+    bool utf = true;
+#endif
 
     if (!this->_enabled)
         return false;
@@ -159,7 +178,12 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     this->_client->print(this->_deviceHostname);
     this->_client->print(' ');
     this->_client->print(appName);
-    this->_client->print(F(" - - - \xEF\xBB\xBF"));
+    this->_client->print(F(" - - - "));
+    if (utf) {
+        this->_client->print(F("\xEF\xBB\xBF"));
+    } else {
+        this->_client->print(F(" "));
+    }
     this->_client->print(F("["));
     this->_client->print(int(millis() / 1000));
     this->_client->print(F("]: "));
@@ -169,4 +193,4 @@ inline bool Syslog::_sendLog(uint16_t pri, const char *appName, const char *mess
     return true;
 }
 
-#endif
+#endif

src/DebugConfiguration.h

@@ -3,8 +3,8 @@
 #include "configuration.h"
 
 // DEBUG LED
-#ifndef LED_INVERTED
-#define LED_INVERTED 0 // define as 1 if LED is active low (on)
+#ifndef LED_STATE_ON
+#define LED_STATE_ON 1
 #endif
 
 // -----------------------------------------------------------------------------
@@ -45,7 +45,7 @@
 #define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
-#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE) && !defined(PIO_UNIT_TESTING)
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)
@@ -62,6 +62,9 @@
 #endif
 #endif
 
+/// A C wrapper for LOG_DEBUG that can be used from arduino C libs that don't know about C++ or meshtastic
+extern "C" void logLegacy(const char *level, const char *fmt, ...);
+
 #define SYSLOG_NILVALUE "-"
 
 #define SYSLOG_CRIT 2  /* critical conditions */

src/DisplayFormatters.cpp

@@ -3,6 +3,9 @@
 const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
 {
     switch (preset) {
+    case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
+        return useShortName ? "ShortT" : "ShortTurbo";
+        break;
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW:
         return useShortName ? "ShortS" : "ShortSlow";
         break;

src/FSCommon.cpp

@@ -24,6 +24,39 @@ SPIClass SPI1(HSPI);
 
 #endif // HAS_SDCARD
 
+#if defined(ARCH_STM32WL)
+
+uint16_t OSFS::startOfEEPROM = 1;
+uint16_t OSFS::endOfEEPROM = 2048;
+
+// 3) How do I read from the medium?
+void OSFS::readNBytes(uint16_t address, unsigned int num, byte *output)
+{
+    for (uint16_t i = address; i < address + num; i++) {
+        *output = EEPROM.read(i);
+        output++;
+    }
+}
+
+// 4) How to I write to the medium?
+void OSFS::writeNBytes(uint16_t address, unsigned int num, const byte *input)
+{
+    for (uint16_t i = address; i < address + num; i++) {
+        EEPROM.update(i, *input);
+        input++;
+    }
+}
+#endif
+
+bool lfs_assert_failed =
+    false; // Note: we use this global on all platforms, though it can only be set true on nrf52 (in our modified lfs_util.h)
+
+extern "C" void lfs_assert(const char *reason)
+{
+    LOG_ERROR("LFS assert: %s\n", reason);
+    lfs_assert_failed = true;
+}
+
 /**
  * @brief Copies a file from one location to another.
  *
@@ -33,7 +66,33 @@ SPIClass SPI1(HSPI);
  */
 bool copyFile(const char *from, const char *to)
 {
-#ifdef FSCom
+#ifdef ARCH_STM32WL
+    unsigned char cbuffer[2048];
+
+    // Var to hold the result of actions
+    OSFS::result r;
+
+    r = OSFS::getFile(from, cbuffer);
+
+    if (r == notfound) {
+        LOG_ERROR("Failed to open source file %s\n", from);
+        return false;
+    } else if (r == noerr) {
+        r = OSFS::newFile(to, cbuffer, true);
+        if (r == noerr) {
+            return true;
+        } else {
+            LOG_ERROR("OSFS Error %d\n", r);
+            return false;
+        }
+
+    } else {
+        LOG_ERROR("OSFS Error %d\n", r);
+        return false;
+    }
+    return true;
+
+#elif defined(FSCom)
     unsigned char cbuffer[16];
 
     File f1 = FSCom.open(from, FILE_O_READ);
@@ -70,7 +129,13 @@ bool copyFile(const char *from, const char *to)
  */
 bool renameFile(const char *pathFrom, const char *pathTo)
 {
-#ifdef FSCom
+#ifdef ARCH_STM32WL
+    if (copyFile(pathFrom, pathTo) && (OSFS::deleteFile(pathFrom) == OSFS::result::NO_ERROR)) {
+        return true;
+    } else {
+        return false;
+    }
+#elif defined(FSCom)
 #ifdef ARCH_ESP32
     // rename was fixed for ESP32 IDF LittleFS in April
     return FSCom.rename(pathFrom, pathTo);
@@ -143,7 +208,7 @@ std::vector<meshtastic_FileInfo> getFiles(const char *dirname, uint8_t levels)
  * @param levels The number of levels of subdirectories to list.
  * @param del Whether or not to delete the contents of the directory after listing.
  */
-void listDir(const char *dirname, uint8_t levels, bool del = false)
+void listDir(const char *dirname, uint8_t levels, bool del)
 {
 #ifdef FSCom
 #if (defined(ARCH_ESP32) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO))
@@ -158,7 +223,9 @@ void listDir(const char *dirname, uint8_t levels, bool del = false)
     }
 
     File file = root.openNextFile();
-    while (file) {
+    while (
+        file &&
+        file.name()[0]) { // This file.name() check is a workaround for a bug in the Adafruit LittleFS nrf52 glue (see issue 4395)
         if (file.isDirectory() && !String(file.name()).endsWith(".")) {
             if (levels) {
 #ifdef ARCH_ESP32
@@ -182,6 +249,7 @@ void listDir(const char *dirname, uint8_t levels, bool del = false)
                     file.close();
                 }
 #else
+                LOG_DEBUG(" %s (directory)\n", file.name());
                 listDir(file.name(), levels - 1, del);
                 file.close();
 #endif
@@ -208,7 +276,7 @@ void listDir(const char *dirname, uint8_t levels, bool del = false)
                 file.close();
             }
 #else
-            LOG_DEBUG(" %s (%i Bytes)\n", file.name(), file.size());
+            LOG_DEBUG("   %s (%i Bytes)\n", file.name(), file.size());
             file.close();
 #endif
         }
@@ -257,62 +325,6 @@ void rmDir(const char *dirname)
 #endif
 }
 
-bool fsCheck()
-{
-#if defined(ARCH_NRF52)
-    size_t write_size = 0;
-    size_t read_size = 0;
-    char buf[32] = {0};
-
-    Adafruit_LittleFS_Namespace::File file(FSCom);
-    const char *text = "meshtastic fs test";
-    size_t text_length = strlen(text);
-    const char *filename = "/meshtastic.txt";
-
-    LOG_DEBUG("Try create file .\n");
-    if (file.open(filename, FILE_O_WRITE)) {
-        write_size = file.write(text);
-    } else {
-        LOG_DEBUG("Open file failed .\n");
-        goto FORMAT_FS;
-    }
-
-    if (write_size != text_length) {
-        LOG_DEBUG("Text bytes do not match .\n");
-        file.close();
-        goto FORMAT_FS;
-    }
-
-    file.close();
-
-    if (!file.open(filename, FILE_O_READ)) {
-        LOG_DEBUG("Open file failed .\n");
-        goto FORMAT_FS;
-    }
-
-    read_size = file.readBytes(buf, text_length);
-    if (read_size != text_length) {
-        LOG_DEBUG("Text bytes do not match .\n");
-        file.close();
-        goto FORMAT_FS;
-    }
-
-    if (memcmp(buf, text, text_length) != 0) {
-        LOG_DEBUG("The written bytes do not match the read bytes .\n");
-        file.close();
-        goto FORMAT_FS;
-    }
-    return true;
-FORMAT_FS:
-    LOG_DEBUG("Format FS ....\n");
-    FSCom.format();
-    FSCom.begin();
-    return false;
-#else
-    return true;
-#endif
-}
-
 void fsInit()
 {
 #ifdef FSCom
@@ -322,35 +334,6 @@ void fsInit()
     }
 #if defined(ARCH_ESP32)
     LOG_DEBUG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
-#elif defined(ARCH_NRF52)
-    /*
-     * nRF52840 has a certain chance of automatic formatting failure.
-     * Try to create a file after initializing the file system. If the creation fails,
-     * it means that the file system is not working properly. Please format it manually again.
-     * To check the normality of the file system, you need to disable the LFS_NO_ASSERT assertion.
-     * Otherwise, the assertion will be entered at the moment of reading or opening, and the FS will not be formatted.
-     * */
-    bool ret = false;
-    uint8_t retry = 3;
-
-    while (retry--) {
-        ret = fsCheck();
-        if (ret) {
-            LOG_DEBUG("File system check is OK.\n");
-            break;
-        }
-        delay(10);
-    }
-
-    // It may not be possible to reach this step.
-    // Add a loop here to prevent unpredictable situations from happening.
-    // Can add a screen to display error status later.
-    if (!ret) {
-        while (1) {
-            LOG_ERROR("The file system is damaged and cannot proceed to the next step.\n");
-            delay(1000);
-        }
-    }
 #else
     LOG_DEBUG("Filesystem files:\n");
 #endif

src/FSCommon.h

@@ -15,10 +15,13 @@
 #endif
 
 #if defined(ARCH_STM32WL)
-#include "platform/stm32wl/InternalFileSystem.h" // STM32WL version
-#define FSCom InternalFS
-#define FSBegin() FSCom.begin()
-using namespace LittleFS_Namespace;
+// STM32WL series 2 Kbytes (8 rows of 256 bytes)
+#include <EEPROM.h>
+#include <OSFS.h>
+
+// Useful consts
+const OSFS::result noerr = OSFS::result::NO_ERROR;
+const OSFS::result notfound = OSFS::result::FILE_NOT_FOUND;
 #endif
 
 #if defined(ARCH_RP2040)
@@ -48,9 +51,13 @@ using namespace Adafruit_LittleFS_Namespace;
 #endif
 
 void fsInit();
+void fsListFiles();
 bool copyFile(const char *from, const char *to);
 bool renameFile(const char *pathFrom, const char *pathTo);
 std::vector<meshtastic_FileInfo> getFiles(const char *dirname, uint8_t levels);
-void listDir(const char *dirname, uint8_t levels, bool del);
+void listDir(const char *dirname, uint8_t levels, bool del = false);
 void rmDir(const char *dirname);
-void setupSDCard();
+void setupSDCard();
+
+extern bool lfs_assert_failed; // Note: we use this global on all platforms, though it can only be set true on nrf52 (in our
+                               // modified lfs_util.h)

src/GpioLogic.cpp

@@ -0,0 +1,84 @@
+#include "GpioLogic.h"
+#include <assert.h>
+
+void GpioVirtPin::set(bool value)
+{
+    if (value != this->value) {
+        this->value = value ? PinState::On : PinState::Off;
+        if (dependentPin)
+            dependentPin->update();
+    }
+}
+
+GpioTransformer::GpioTransformer(GpioPin *outPin) : outPin(outPin) {}
+
+void GpioTransformer::set(bool value)
+{
+    outPin->set(value);
+}
+
+GpioNotTransformer::GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin) : GpioTransformer(outPin), inPin(inPin)
+{
+    assert(!inPin->dependentPin); // We only allow one dependent pin
+    inPin->dependentPin = this;
+
+    // Don't update at construction time, because various GpioPins might be global constructor based not yet initied because
+    // order of operations for global constructors is not defined.
+    // update();
+}
+
+/**
+ * Update the output pin based on the current state of the input pin.
+ */
+void GpioNotTransformer::update()
+{
+    auto p = inPin->get();
+    if (p == GpioVirtPin::PinState::Unset)
+        return; // Not yet fully initialized
+
+    set(!p);
+}
+
+GpioBinaryTransformer::GpioBinaryTransformer(GpioVirtPin *inPin1, GpioVirtPin *inPin2, GpioPin *outPin, Operation operation)
+    : GpioTransformer(outPin), inPin1(inPin1), inPin2(inPin2), operation(operation)
+{
+    assert(!inPin1->dependentPin); // We only allow one dependent pin
+    inPin1->dependentPin = this;
+    assert(!inPin2->dependentPin); // We only allow one dependent pin
+    inPin2->dependentPin = this;
+
+    // Don't update at construction time, because various GpioPins might be global constructor based not yet initied because
+    // order of operations for global constructors is not defined.
+    // update();
+}
+
+void GpioBinaryTransformer::update()
+{
+    auto p1 = inPin1->get(), p2 = inPin2->get();
+    GpioVirtPin::PinState newValue = GpioVirtPin::PinState::Unset;
+
+    if (p1 == GpioVirtPin::PinState::Unset)
+        newValue = p2; // Not yet fully initialized
+    else if (p2 == GpioVirtPin::PinState::Unset)
+        newValue = p1; // Not yet fully initialized
+
+    // If we've already found our value just use it, otherwise need to do the operation
+    if (newValue == GpioVirtPin::PinState::Unset) {
+        switch (operation) {
+        case And:
+            newValue = (GpioVirtPin::PinState)(p1 && p2);
+            break;
+        case Or:
+            newValue = (GpioVirtPin::PinState)(p1 || p2);
+            break;
+        case Xor:
+            newValue = (GpioVirtPin::PinState)(p1 != p2);
+            break;
+        default:
+            assert(false);
+        }
+    }
+    set(newValue);
+}
+
+GpioSplitter::GpioSplitter(GpioPin *outPin1, GpioPin *outPin2) : outPin1(outPin1), outPin2(outPin2) {}

src/GpioLogic.h

@@ -0,0 +1,144 @@
+#pragma once
+
+#include "configuration.h"
+
+/**This is a set of classes to mediate access to GPIOs in a structured way.  Most usage of GPIOs do not
+    require these classes!  But if your hardware has a GPIO that is 'shared' between multiple devices (i.e. a shared power enable)
+    then using these classes might be able to let you cleanly turn on that enable when either dependent device is needed.
+
+    Note: these classes are intended to be 99% inline for the common case so should have minimal impact on flash or RAM
+   requirements.
+*/
+
+/**
+ * A logical GPIO pin (not necessary raw hardware).
+ */
+class GpioPin
+{
+  public:
+    virtual void set(bool value) = 0;
+};
+
+/**
+ * A physical GPIO hw pin.
+ */
+class GpioHwPin : public GpioPin
+{
+    uint32_t num;
+
+  public:
+    explicit GpioHwPin(uint32_t num) : num(num) {}
+
+    void set(bool value) { digitalWrite(num, value); }
+};
+
+class GpioTransformer;
+class GpioNotTransformer;
+class GpioBinaryTransformer;
+
+/**
+ * A virtual GPIO pin.
+ */
+class GpioVirtPin : public GpioPin
+{
+    friend class GpioBinaryTransformer;
+    friend class GpioNotTransformer;
+
+  public:
+    enum PinState { On = true, Off = false, Unset = 2 };
+
+    void set(bool value);
+    PinState get() const { return value; }
+
+  private:
+    PinState value = PinState::Unset;
+    GpioTransformer *dependentPin = NULL;
+};
+
+#include <assert.h>
+
+/**
+ * A 'smart' trigger that can depend in a fake GPIO and if that GPIO changes, drive some other downstream GPIO to change.
+ * notably: the set method is not public (because it always is calculated by a subclass)
+ */
+class GpioTransformer
+{
+  public:
+    /**
+     * Update the output pin based on the current state of the input pin.
+     */
+    virtual void update() = 0;
+
+  protected:
+    GpioTransformer(GpioPin *outPin);
+
+    void set(bool value);
+
+  private:
+    GpioPin *outPin;
+};
+
+/**
+ * A transformer that performs a unary NOT operation from an input.
+ */
+class GpioNotTransformer : public GpioTransformer
+{
+  public:
+    GpioNotTransformer(GpioVirtPin *inPin, GpioPin *outPin);
+
+  protected:
+    friend class GpioVirtPin;
+
+    /**
+     * Update the output pin based on the current state of the input pin.
+     */
+    void update();
+
+  private:
+    GpioVirtPin *inPin;
+};
+
+/**
+ * A transformer that combines multiple virtual pins to drive an output pin
+ */
+class GpioBinaryTransformer : public GpioTransformer
+{
+
+  public:
+    enum Operation { And, Or, Xor };
+
+    GpioBinaryTransformer(GpioVirtPin *inPin1, GpioVirtPin *inPin2, GpioPin *outPin, Operation operation);
+
+  protected:
+    friend class GpioVirtPin;
+
+    /**
+     * Update the output pin based on the current state of the input pins.
+     */
+    void update();
+
+  private:
+    GpioVirtPin *inPin1;
+    GpioVirtPin *inPin2;
+    Operation operation;
+};
+
+/**
+ * Sometimes a single output GPIO single needs to drive multiple physical GPIOs.  This class provides that.
+ */
+class GpioSplitter : public GpioPin
+{
+
+  public:
+    GpioSplitter(GpioPin *outPin1, GpioPin *outPin2);
+
+    void set(bool value)
+    {
+        outPin1->set(value);
+        outPin2->set(value);
+    }
+
+  private:
+    GpioPin *outPin1;
+    GpioPin *outPin2;
+};

src/Led.cpp

@@ -0,0 +1,66 @@
+#include "Led.h"
+#include "PowerMon.h"
+#include "main.h"
+#include "power.h"
+
+GpioVirtPin ledForceOn, ledBlink;
+
+#if defined(LED_PIN)
+// Most boards have a GPIO for LED control
+static GpioHwPin ledRawHwPin(LED_PIN);
+#else
+static GpioVirtPin ledRawHwPin; // Dummy pin for no hardware
+#endif
+
+#if LED_STATE_ON == 0
+static GpioVirtPin ledHwPin;
+static GpioNotTransformer ledInverter(&ledHwPin, &ledRawHwPin);
+#else
+static GpioPin &ledHwPin = ledRawHwPin;
+#endif
+
+#if defined(HAS_PMU)
+/**
+ * A GPIO controlled by the PMU
+ */
+class GpioPmuPin : public GpioPin
+{
+  public:
+    void set(bool value)
+    {
+        if (pmu_found && PMU) {
+            // blink the axp led
+            PMU->setChargingLedMode(value ? XPOWERS_CHG_LED_ON : XPOWERS_CHG_LED_OFF);
+        }
+    }
+} ledPmuHwPin;
+
+// In some cases we need to drive a PMU LED and a normal LED
+static GpioSplitter ledFinalPin(&ledHwPin, &ledPmuHwPin);
+#else
+static GpioPin &ledFinalPin = ledHwPin;
+#endif
+
+#ifdef USE_POWERMON
+/**
+ * We monitor changes to the LED drive output because we use that as a sanity test in our power monitor stuff.
+ */
+class MonitoredLedPin : public GpioPin
+{
+  public:
+    void set(bool value)
+    {
+        if (powerMon) {
+            if (value)
+                powerMon->setState(meshtastic_PowerMon_State_LED_On);
+            else
+                powerMon->clearState(meshtastic_PowerMon_State_LED_On);
+        }
+        ledFinalPin.set(value);
+    }
+} monitoredLedPin;
+#else
+static GpioPin &monitoredLedPin = ledFinalPin;
+#endif
+
+static GpioBinaryTransformer ledForcer(&ledForceOn, &ledBlink, &monitoredLedPin, GpioBinaryTransformer::Or);

src/Led.h

@@ -0,0 +1,7 @@
+#include "GpioLogic.h"
+#include "configuration.h"
+
+/**
+ * ledForceOn and ledForceOff both override the normal ledBlinker behavior (which is controlled by main)
+ */
+extern GpioVirtPin ledForceOn, ledBlink;

src/OSTimer.cpp

@@ -1,60 +0,0 @@
-#include "OSTimer.h"
-#include "configuration.h"
-
-/**
- * Schedule a callback to run.  The callback must _not_ block, though it is called from regular thread level (not ISR)
- *
- * NOTE! xTimerPend... seems to ignore the time passed in on ESP32 and on NRF52
- * The reason this didn't work is because xTimerPednFunctCall really isn't a timer function at all - it just means run the
-callback
- * from the timer thread the next time you have spare cycles.
- *
- * @return true if successful, false if the timer fifo is too full.
-
-bool scheduleOSCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
-{
-    return xTimerPendFunctionCall(callback, param1, param2, pdMS_TO_TICKS(delayMsec));
-} */
-
-#ifdef ARCH_ESP32
-
-// Super skanky quick hack to use hardware timers of the ESP32
-static hw_timer_t *timer;
-static PendableFunction tCallback;
-static void *tParam1;
-static uint32_t tParam2;
-
-static void IRAM_ATTR onTimer()
-{
-    (*tCallback)(tParam1, tParam2);
-}
-
-/**
- * Schedules a hardware callback function to be executed after a specified delay.
- *
- * @param callback The function to be executed.
- * @param param1 The first parameter to be passed to the function.
- * @param param2 The second parameter to be passed to the function.
- * @param delayMsec The delay time in milliseconds before the function is executed.
- *
- * @return True if the function was successfully scheduled, false otherwise.
- */
-bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec)
-{
-    if (!timer) {
-        timer = timerBegin(0, 80, true); // one usec per tick (main clock is 80MhZ on ESP32)
-        assert(timer);
-        timerAttachInterrupt(timer, &onTimer, true);
-    }
-
-    tCallback = callback;
-    tParam1 = param1;
-    tParam2 = param2;
-
-    timerAlarmWrite(timer, delayMsec * 1000UL, false); // Do not reload, we want it to be a single shot timer
-    timerRestart(timer);
-    timerAlarmEnable(timer);
-    return true;
-}
-
-#endif

src/OSTimer.h

@@ -1,8 +0,0 @@
-#pragma once
-
-#include <Arduino.h>
-
-typedef void (*PendableFunction)(void *pvParameter1, uint32_t ulParameter2);
-
-/// Uses a hardware timer, but calls the handler in _interrupt_ context
-bool scheduleHWCallback(PendableFunction callback, void *param1, uint32_t param2, uint32_t delayMsec);

src/Power.cpp

@@ -80,9 +80,6 @@ RAK9154Sensor rak9154Sensor;
 #endif
 
 #ifdef HAS_PMU
-#include "XPowersAXP192.tpp"
-#include "XPowersAXP2101.tpp"
-#include "XPowersLibInterface.hpp"
 XPowersLibInterface *PMU = NULL;
 #else
 
@@ -200,7 +197,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
         }
 #endif
 
-#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) &&                                  \
+    !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
             LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
             return getINAVoltage();
@@ -232,12 +230,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
             raw = espAdcRead();
             scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
             scaled *= operativeAdcMultiplier;
-#else // block for all other platforms
+#else           // block for all other platforms
+#ifdef ADC_CTRL // enable adc voltage divider when we need to read
+            pinMode(ADC_CTRL, OUTPUT);
+            digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+            delay(10);
+#endif
             for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
                 raw += analogRead(BATTERY_PIN);
             }
             raw = raw / BATTERY_SENSE_SAMPLES;
             scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
+#ifdef ADC_CTRL // disable adc voltage divider when we need to read
+            digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
+#endif
 #endif
 
             if (!initial_read_done) {
@@ -412,7 +418,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     }
 #endif
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
     uint16_t getINAVoltage()
     {
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
@@ -441,13 +447,18 @@ class AnalogBatteryLevel : public HasBatteryLevel
             if (!ina260Sensor.isInitialized())
                 return ina260Sensor.runOnce() > 0;
             return ina260Sensor.isRunning();
+        } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA3221].first ==
+                   config.power.device_battery_ina_address) {
+            if (!ina3221Sensor.isInitialized())
+                return ina3221Sensor.runOnce() > 0;
+            return ina3221Sensor.isRunning();
         }
         return false;
     }
 #endif
 };
 
-AnalogBatteryLevel analogLevel;
+static AnalogBatteryLevel analogLevel;
 
 Power::Power() : OSThread("Power")
 {
@@ -546,6 +557,10 @@ bool Power::setup()
 {
     bool found = axpChipInit() || analogInit();
 
+#ifdef NRF_APM
+    found = true;
+#endif
+
     enabled = found;
     low_voltage_counter = 0;
 
@@ -575,10 +590,16 @@ void Power::shutdown()
 // TODO(girts): move this and other axp stuff to power.h/power.cpp.
 void Power::readPowerStatus()
 {
+    int32_t batteryVoltageMv = -1; // Assume unknown
+    int8_t batteryChargePercent = -1;
+    OptionalBool usbPowered = OptUnknown;
+    OptionalBool hasBattery = OptUnknown; // These must be static because NRF_APM code doesn't run every time
+    OptionalBool isCharging = OptUnknown;
+
     if (batteryLevel) {
-        bool hasBattery = batteryLevel->isBatteryConnect();
-        uint32_t batteryVoltageMv = 0;
-        int8_t batteryChargePercent = 0;
+        hasBattery = batteryLevel->isBatteryConnect() ? OptTrue : OptFalse;
+        usbPowered = batteryLevel->isVbusIn() ? OptTrue : OptFalse;
+        isCharging = batteryLevel->isCharging() ? OptTrue : OptFalse;
         if (hasBattery) {
             batteryVoltageMv = batteryLevel->getBattVoltage();
             // If the AXP192 returns a valid battery percentage, use it
@@ -593,102 +614,90 @@ void Power::readPowerStatus()
                                              0, 100);
             }
         }
+    }
 
-        OptionalBool NRF_USB = OptFalse;
-
+// FIXME: IMO we shouldn't be littering our code with all these ifdefs.  Way better instead to make a Nrf52IsUsbPowered subclass
+// (which shares a superclass with the BatteryLevel stuff)
+// that just provides a few methods.  But in the interest of fixing this bug I'm going to follow current
+// practice.
 #ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
                // changes.
 
-        static nrfx_power_usb_state_t prev_nrf_usb_state = (nrfx_power_usb_state_t)-1; // -1 so that state detected at boot
-        nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+    nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
+    // LOG_DEBUG("NRF Power %d\n", nrf_usb_state);
 
-        // If state changed
-        if (nrf_usb_state != prev_nrf_usb_state) {
-            // If changed to DISCONNECTED
-            if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
-                powerFSM.trigger(EVENT_POWER_DISCONNECTED);
-                NRF_USB = OptFalse;
-            }
-            // If changed to CONNECTED / READY
-            else {
-                powerFSM.trigger(EVENT_POWER_CONNECTED);
-                NRF_USB = OptTrue;
-            }
+    // If changed to DISCONNECTED
+    if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED)
+        isCharging = usbPowered = OptFalse;
+    // If changed to CONNECTED / READY
+    else
+        isCharging = usbPowered = OptTrue;
 
-            // Cache the current state
-            prev_nrf_usb_state = nrf_usb_state;
-        }
 #endif
-        // Notify any status instances that are observing us
-        const PowerStatus powerStatus2 = PowerStatus(
-            hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() || NRF_USB == OptTrue ? OptTrue : OptFalse,
-            batteryLevel->isCharging() || NRF_USB == OptTrue ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
-        LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
-                  powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
-        newStatus.notifyObservers(&powerStatus2);
+
+    // Notify any status instances that are observing us
+    const PowerStatus powerStatus2 = PowerStatus(hasBattery, usbPowered, isCharging, batteryVoltageMv, batteryChargePercent);
+    LOG_DEBUG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
+              powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
+    newStatus.notifyObservers(&powerStatus2);
 #ifdef DEBUG_HEAP
-        if (lastheap != memGet.getFreeHeap()) {
-            LOG_DEBUG("Threads running:");
-            int running = 0;
-            for (int i = 0; i < MAX_THREADS; i++) {
-                auto thread = concurrency::mainController.get(i);
-                if ((thread != nullptr) && (thread->enabled)) {
-                    LOG_DEBUG(" %s", thread->ThreadName.c_str());
-                    running++;
-                }
+    if (lastheap != memGet.getFreeHeap()) {
+        LOG_DEBUG("Threads running:");
+        int running = 0;
+        for (int i = 0; i < MAX_THREADS; i++) {
+            auto thread = concurrency::mainController.get(i);
+            if ((thread != nullptr) && (thread->enabled)) {
+                LOG_DEBUG(" %s", thread->ThreadName.c_str());
+                running++;
             }
-            LOG_DEBUG("\n");
-            LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
-                      memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
-            lastheap = memGet.getFreeHeap();
         }
+        LOG_DEBUG("\n");
+        LOG_DEBUG("Heap status: %d/%d bytes free (%d), running %d/%d threads\n", memGet.getFreeHeap(), memGet.getHeapSize(),
+                  memGet.getFreeHeap() - lastheap, running, concurrency::mainController.size(false));
+        lastheap = memGet.getFreeHeap();
+    }
 #ifdef DEBUG_HEAP_MQTT
-        if (mqtt) {
-            // send MQTT-Packet with Heap-Size
-            uint8_t dmac[6];
-            getMacAddr(dmac); // Get our hardware ID
-            char mac[18];
-            sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
+    if (mqtt) {
+        // send MQTT-Packet with Heap-Size
+        uint8_t dmac[6];
+        getMacAddr(dmac); // Get our hardware ID
+        char mac[18];
+        sprintf(mac, "!%02x%02x%02x%02x", dmac[2], dmac[3], dmac[4], dmac[5]);
 
-            auto newHeap = memGet.getFreeHeap();
-            std::string heapTopic =
-                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
-            std::string heapString = std::to_string(newHeap);
-            mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
-            auto wifiRSSI = WiFi.RSSI();
-            std::string wifiTopic =
-                (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
-            std::string wifiString = std::to_string(wifiRSSI);
-            mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
-        }
+        auto newHeap = memGet.getFreeHeap();
+        std::string heapTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/heap/") + std::string(mac);
+        std::string heapString = std::to_string(newHeap);
+        mqtt->pubSub.publish(heapTopic.c_str(), heapString.c_str(), false);
+        auto wifiRSSI = WiFi.RSSI();
+        std::string wifiTopic =
+            (*moduleConfig.mqtt.root ? moduleConfig.mqtt.root : "msh") + std::string("/2/wifi/") + std::string(mac);
+        std::string wifiString = std::to_string(wifiRSSI);
+        mqtt->pubSub.publish(wifiTopic.c_str(), wifiString.c_str(), false);
+    }
 #endif
 
 #endif
 
-        // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
-        // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
-        //
-        if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
-            if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
-                low_voltage_counter++;
-                LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
-                if (low_voltage_counter > 10) {
+    // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
+    // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
+    //
+    if (batteryLevel && powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
+        if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
+            low_voltage_counter++;
+            LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
+            if (low_voltage_counter > 10) {
 #ifdef ARCH_NRF52
-                    // We can't trigger deep sleep on NRF52, it's freezing the board
-                    LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
+                // We can't trigger deep sleep on NRF52, it's freezing the board
+                LOG_DEBUG("Low voltage detected, but not triggering deep sleep\n");
 #else
-                    LOG_INFO("Low voltage detected, triggering deep sleep\n");
-                    powerFSM.trigger(EVENT_LOW_BATTERY);
+                LOG_INFO("Low voltage detected, triggering deep sleep\n");
+                powerFSM.trigger(EVENT_LOW_BATTERY);
 #endif
-                }
-            } else {
-                low_voltage_counter = 0;
             }
+        } else {
+            low_voltage_counter = 0;
         }
-    } else {
-        // No power sensing on this board - tell everyone else we have no idea what is happening
-        const PowerStatus powerStatus3 = PowerStatus(OptUnknown, OptUnknown, OptUnknown, -1, -1);
-        newStatus.notifyObservers(&powerStatus3);
     }
 }
 
@@ -1037,4 +1046,4 @@ bool Power::axpChipInit()
 #else
     return false;
 #endif
-}
+}

src/PowerFSM.cpp

@@ -9,6 +9,7 @@
  */
 #include "PowerFSM.h"
 #include "Default.h"
+#include "Led.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "PowerMon.h"
@@ -21,12 +22,15 @@
 #ifndef SLEEP_TIME
 #define SLEEP_TIME 30
 #endif
-
+#if EXCLUDE_POWER_FSM
+FakeFsm powerFSM;
+void PowerFSM_setup(){};
+#else
 /// Should we behave as if we have AC power now?
 static bool isPowered()
 {
 // Circumvent the battery sensing logic and assumes constant power if no battery pin or power mgmt IC
-#if !defined(BATTERY_PIN) && !defined(HAS_AXP192) && !defined(HAS_AXP2101)
+#if !defined(BATTERY_PIN) && !defined(HAS_AXP192) && !defined(HAS_AXP2101) && !defined(NRF_APM)
     return true;
 #endif
 
@@ -50,7 +54,6 @@ static bool isPowered()
 static void sdsEnter()
 {
     LOG_DEBUG("Enter state: SDS\n");
-    powerMon->setState(meshtastic_PowerMon_State_CPU_DeepSleep);
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
     doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
@@ -70,7 +73,6 @@ static uint32_t secsSlept;
 static void lsEnter()
 {
     LOG_INFO("lsEnter begin, ls_secs=%u\n", config.power.ls_secs);
-    powerMon->clearState(meshtastic_PowerMon_State_Screen_On);
     screen->setOn(false);
     secsSlept = 0; // How long have we been sleeping this time
 
@@ -91,7 +93,7 @@ static void lsIdle()
             uint32_t sleepTime = SLEEP_TIME;
 
             powerMon->setState(meshtastic_PowerMon_State_CPU_LightSleep);
-            setLed(false); // Never leave led on while in light sleep
+            ledBlink.set(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
             powerMon->clearState(meshtastic_PowerMon_State_CPU_LightSleep);
 
@@ -99,7 +101,7 @@ static void lsIdle()
             case ESP_SLEEP_WAKEUP_TIMER:
                 // Normal case: timer expired, we should just go back to sleep ASAP
 
-                setLed(true);                   // briefly turn on led
+                ledBlink.set(true);             // briefly turn on led
                 wakeCause2 = doLightSleep(100); // leave led on for 1ms
 
                 secsSlept += sleepTime;
@@ -134,7 +136,7 @@ static void lsIdle()
         }
     } else {
         // Time to stop sleeping!
-        setLed(false);
+        ledBlink.set(false);
         LOG_INFO("Reached ls_secs, servicing loop()\n");
         powerFSM.trigger(EVENT_WAKE_TIMER);
     }
@@ -149,7 +151,6 @@ static void lsExit()
 static void nbEnter()
 {
     LOG_DEBUG("Enter state: NB\n");
-    powerMon->clearState(meshtastic_PowerMon_State_BT_On);
     screen->setOn(false);
 #ifdef ARCH_ESP32
     // Only ESP32 should turn off bluetooth
@@ -161,8 +162,6 @@ static void nbEnter()
 
 static void darkEnter()
 {
-    powerMon->clearState(meshtastic_PowerMon_State_BT_On);
-    powerMon->clearState(meshtastic_PowerMon_State_Screen_On);
     setBluetoothEnable(true);
     screen->setOn(false);
 }
@@ -170,8 +169,6 @@ static void darkEnter()
 static void serialEnter()
 {
     LOG_DEBUG("Enter state: SERIAL\n");
-    powerMon->clearState(meshtastic_PowerMon_State_BT_On);
-    powerMon->setState(meshtastic_PowerMon_State_Screen_On);
     setBluetoothEnable(false);
     screen->setOn(true);
     screen->print("Serial connected\n");
@@ -180,7 +177,6 @@ static void serialEnter()
 static void serialExit()
 {
     // Turn bluetooth back on when we leave serial stream API
-    powerMon->setState(meshtastic_PowerMon_State_BT_On);
     setBluetoothEnable(true);
     screen->print("Serial disconnected\n");
 }
@@ -193,8 +189,6 @@ static void powerEnter()
         LOG_INFO("Loss of power in Powered\n");
         powerFSM.trigger(EVENT_POWER_DISCONNECTED);
     } else {
-        powerMon->setState(meshtastic_PowerMon_State_BT_On);
-        powerMon->setState(meshtastic_PowerMon_State_Screen_On);
         screen->setOn(true);
         setBluetoothEnable(true);
         // within enter() the function getState() returns the state we came from
@@ -218,8 +212,6 @@ static void powerIdle()
 
 static void powerExit()
 {
-    powerMon->setState(meshtastic_PowerMon_State_BT_On);
-    powerMon->setState(meshtastic_PowerMon_State_Screen_On);
     screen->setOn(true);
     setBluetoothEnable(true);
 
@@ -231,8 +223,6 @@ static void powerExit()
 static void onEnter()
 {
     LOG_DEBUG("Enter state: ON\n");
-    powerMon->setState(meshtastic_PowerMon_State_BT_On);
-    powerMon->setState(meshtastic_PowerMon_State_Screen_On);
     screen->setOn(true);
     setBluetoothEnable(true);
 }
@@ -408,4 +398,5 @@ void PowerFSM_setup()
 #endif
 
     powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state
-}
+}
+#endif

src/PowerFSM.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#include <Fsm.h>
+#include "configuration.h"
 
 // See sw-design.md for documentation
 
@@ -22,7 +22,30 @@
 #define EVENT_SHUTDOWN 16        // force a full shutdown now (not just sleep)
 #define EVENT_INPUT 17           // input broker wants something, we need to wake up and enable screen
 
+#if EXCLUDE_POWER_FSM
+class FakeFsm
+{
+  public:
+    void trigger(int event)
+    {
+        if (event == EVENT_SERIAL_CONNECTED) {
+            serialConnected = true;
+        } else if (event == EVENT_SERIAL_DISCONNECTED) {
+            serialConnected = false;
+        }
+    };
+    bool getState() { return serialConnected; };
+
+  private:
+    bool serialConnected = false;
+};
+extern FakeFsm powerFSM;
+void PowerFSM_setup();
+
+#else
+#include <Fsm.h>
 extern Fsm powerFSM;
 extern State stateON, statePOWER, stateSERIAL, stateDARK;
 
 void PowerFSM_setup();
+#endif

src/PowerFSMThread.h

@@ -18,6 +18,7 @@ class PowerFSMThread : public OSThread
   protected:
     int32_t runOnce() override
     {
+#if !EXCLUDE_POWER_FSM
         powerFSM.run_machine();
 
         /// If we are in power state we force the CPU to wake every 10ms to check for serial characters (we don't yet wake
@@ -35,6 +36,9 @@ class PowerFSMThread : public OSThread
         }
 
         return 100;
+#else
+        return INT32_MAX;
+#endif
     }
 };
 

src/PowerMon.cpp

@@ -2,9 +2,11 @@
 #include "NodeDB.h"
 
 // Use the 'live' config flag to figure out if we should be showing this message
-static bool is_power_enabled(uint64_t m)
+bool PowerMon::is_power_enabled(uint64_t m)
 {
-    return (m & config.power.powermon_enables) ? true : false;
+    // FIXME: VERY STRANGE BUG: if I or in "force_enabled || " the flashed image on a rak4631 is not accepted by the bootloader as
+    // valid!!!  Possibly a linker/gcc/bootloader bug somewhere?
+    return ((m & config.power.powermon_enables) ? true : false);
 }
 
 void PowerMon::setState(_meshtastic_PowerMon_State state, const char *reason)

src/PowerMon.h

@@ -17,6 +17,13 @@ class PowerMon
 {
     uint64_t states = 0UL;
 
+    friend class PowerStressModule;
+
+    /**
+     * If stress testing we always want all events logged
+     */
+    bool force_enabled = false;
+
   public:
     PowerMon() {}
 
@@ -27,6 +34,9 @@ class PowerMon
   private:
     // Emit the coded log message
     void emitLog(const char *reason);
+
+    // Use the 'live' config flag to figure out if we should be showing this message
+    bool is_power_enabled(uint64_t m);
 };
 
 extern PowerMon *powerMon;

src/RedirectablePrint.cpp

@@ -38,8 +38,9 @@ size_t RedirectablePrint::write(uint8_t c)
 #ifdef USE_SEGGER
     SEGGER_RTT_PutChar(SEGGER_STDOUT_CH, c);
 #endif
-
-    if (!config.has_lora || config.device.serial_enabled)
+    // Account for legacy config transition
+    bool serialEnabled = config.has_security ? config.security.serial_enabled : config.device.serial_enabled;
+    if (!config.has_lora || serialEnabled)
         dest->write(c);
 
     return 1; // We always claim one was written, rather than trusting what the
@@ -49,7 +50,17 @@ size_t RedirectablePrint::write(uint8_t c)
 size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_list arg)
 {
     va_list copy;
+#if ENABLE_JSON_LOGGING || ARCH_PORTDUINO
+    static char printBuf[512];
+#else
     static char printBuf[160];
+#endif
+
+#ifdef ARCH_PORTDUINO
+    bool color = !settingsMap[ascii_logs];
+#else
+    bool color = true;
+#endif
 
     va_copy(copy, arg);
     size_t len = vsnprintf(printBuf, sizeof(printBuf), format, copy);
@@ -66,7 +77,7 @@ size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_l
         if (!std::isprint(static_cast<unsigned char>(printBuf[f])) && printBuf[f] != '\n')
             printBuf[f] = '#';
     }
-    if (logLevel != nullptr) {
+    if (color && logLevel != nullptr) {
         if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
             Print::write("\u001b[34m", 6);
         if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
@@ -77,7 +88,9 @@ size_t RedirectablePrint::vprintf(const char *logLevel, const char *format, va_l
             Print::write("\u001b[31m", 6);
     }
     len = Print::write(printBuf, len);
-    Print::write("\u001b[0m", 5);
+    if (color && logLevel != nullptr) {
+        Print::write("\u001b[0m", 5);
+    }
     return len;
 }
 
@@ -87,17 +100,27 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
 
     // Cope with 0 len format strings, but look for new line terminator
     bool hasNewline = *format && format[strlen(format) - 1] == '\n';
+#ifdef ARCH_PORTDUINO
+    bool color = !settingsMap[ascii_logs];
+#else
+    bool color = true;
+#endif
 
     // If we are the first message on a report, include the header
     if (!isContinuationMessage) {
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
-            Print::write("\u001b[34m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
-            Print::write("\u001b[32m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
-            Print::write("\u001b[33m", 6);
-        if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_ERROR) == 0)
-            Print::write("\u001b[31m", 6);
+        if (color) {
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
+                Print::write("\u001b[34m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
+                Print::write("\u001b[32m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
+                Print::write("\u001b[33m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_ERROR) == 0)
+                Print::write("\u001b[31m", 6);
+            if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0)
+                Print::write("\u001b[35m", 6);
+        }
+
         uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // display local time on logfile
         if (rtc_sec > 0) {
             long hms = rtc_sec % SEC_PER_DAY;
@@ -111,17 +134,33 @@ void RedirectablePrint::log_to_serial(const char *logLevel, const char *format,
             int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
             int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
 #ifdef ARCH_PORTDUINO
-            ::printf("%s \u001b[0m| %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+            ::printf("%s ", logLevel);
+            if (color) {
+                ::printf("\u001b[0m");
+            }
+            ::printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
 #else
-            printf("%s \u001b[0m| %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+            printf("%s ", logLevel);
+            if (color) {
+                printf("\u001b[0m");
+            }
+            printf("| %02d:%02d:%02d %u ", hour, min, sec, millis() / 1000);
 #endif
-        } else
+        } else {
 #ifdef ARCH_PORTDUINO
-            ::printf("%s \u001b[0m| ??:??:?? %u ", logLevel, millis() / 1000);
+            ::printf("%s ", logLevel);
+            if (color) {
+                ::printf("\u001b[0m");
+            }
+            ::printf("| ??:??:?? %u ", millis() / 1000);
 #else
-            printf("%s \u001b[0m| ??:??:?? %u ", logLevel, millis() / 1000);
+            printf("%s ", logLevel);
+            if (color) {
+                printf("\u001b[0m");
+            }
+            printf("| ??:??:?? %u ", millis() / 1000);
 #endif
-
+        }
         auto thread = concurrency::OSThread::currentThread;
         if (thread) {
             print("[");
@@ -174,7 +213,7 @@ void RedirectablePrint::log_to_syslog(const char *logLevel, const char *format,
 void RedirectablePrint::log_to_ble(const char *logLevel, const char *format, va_list arg)
 {
 #if !MESHTASTIC_EXCLUDE_BLUETOOTH
-    if (config.bluetooth.device_logging_enabled && !pauseBluetoothLogging) {
+    if (config.security.debug_log_api_enabled && !pauseBluetoothLogging) {
         bool isBleConnected = false;
 #ifdef ARCH_ESP32
         isBleConnected = nimbleBluetooth && nimbleBluetooth->isActive() && nimbleBluetooth->isConnected();
@@ -244,7 +283,21 @@ meshtastic_LogRecord_Level RedirectablePrint::getLogLevel(const char *logLevel)
 
 void RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
-#ifdef ARCH_PORTDUINO
+#if ARCH_PORTDUINO
+    // level trace is special, two possible ways to handle it.
+    if (strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0) {
+        if (settingsStrings[traceFilename] != "") {
+            va_list arg;
+            va_start(arg, format);
+            try {
+                traceFile << va_arg(arg, char *) << std::endl;
+            } catch (const std::ios_base::failure &e) {
+            }
+            va_end(arg);
+        }
+        if (settingsMap[logoutputlevel] < level_trace && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_TRACE) == 0)
+            return;
+    }
     if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
         return;
     else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
@@ -330,4 +383,4 @@ std::string RedirectablePrint::mt_sprintf(const std::string fmt_str, ...)
             break;
     }
     return std::string(formatted.get());
-}
+}

src/SafeFile.cpp

@@ -0,0 +1,105 @@
+#include "SafeFile.h"
+
+#ifdef FSCom
+
+// Only way to work on both esp32 and nrf52
+static File openFile(const char *filename, bool fullAtomic)
+{
+    if (!fullAtomic)
+        FSCom.remove(filename); // Nuke the old file to make space (ignore if it !exists)
+
+    String filenameTmp = filename;
+    filenameTmp += ".tmp";
+
+    // clear any previous LFS errors
+    lfs_assert_failed = false;
+
+    return FSCom.open(filenameTmp.c_str(), FILE_O_WRITE);
+}
+
+SafeFile::SafeFile(const char *_filename, bool fullAtomic)
+    : filename(_filename), f(openFile(_filename, fullAtomic)), fullAtomic(fullAtomic)
+{
+}
+
+size_t SafeFile::write(uint8_t ch)
+{
+    if (!f)
+        return 0;
+
+    hash ^= ch;
+    return f.write(ch);
+}
+
+size_t SafeFile::write(const uint8_t *buffer, size_t size)
+{
+    if (!f)
+        return 0;
+
+    for (size_t i = 0; i < size; i++) {
+        hash ^= buffer[i];
+    }
+    return f.write((uint8_t const *)buffer, size); // This nasty cast is _IMPORTANT_ otherwise the correct adafruit method does
+                                                   // not get used (they made a mistake in their typing)
+}
+
+/**
+ * Atomically close the file (deleting any old versions) and readback the contents to confirm the hash matches
+ *
+ * @return false for failure
+ */
+bool SafeFile::close()
+{
+    if (!f)
+        return false;
+
+    f.close();
+    if (!testReadback())
+        return false;
+
+    // brief window of risk here ;-)
+    if (fullAtomic && FSCom.exists(filename.c_str()) && !FSCom.remove(filename.c_str())) {
+        LOG_ERROR("Can't remove old pref file\n");
+        return false;
+    }
+
+    String filenameTmp = filename;
+    filenameTmp += ".tmp";
+    if (!renameFile(filenameTmp.c_str(), filename.c_str())) {
+        LOG_ERROR("Error: can't rename new pref file\n");
+        return false;
+    }
+
+    return true;
+}
+
+/// Read our (closed) tempfile back in and compare the hash
+bool SafeFile::testReadback()
+{
+    bool lfs_failed = lfs_assert_failed;
+    lfs_assert_failed = false;
+
+    String filenameTmp = filename;
+    filenameTmp += ".tmp";
+    auto f2 = FSCom.open(filenameTmp.c_str(), FILE_O_READ);
+    if (!f2) {
+        LOG_ERROR("Can't open tmp file for readback\n");
+        return false;
+    }
+
+    int c = 0;
+    uint8_t test_hash = 0;
+    while ((c = f2.read()) >= 0) {
+        test_hash ^= (uint8_t)c;
+    }
+    f2.close();
+
+    if (test_hash != hash) {
+        LOG_ERROR("Readback failed hash mismatch\n");
+        return false;
+    }
+
+    return !lfs_failed;
+}
+
+#endif

src/SafeFile.h

@@ -0,0 +1,49 @@
+#pragma once
+
+#include "FSCommon.h"
+#include "configuration.h"
+
+#ifdef FSCom
+
+/**
+ * This class provides 'safe'/paranoid file writing.
+ *
+ * Some of our filesystems (in particular the nrf52) may have bugs beneath our layer.  Therefore we want to
+ * be very careful about how we write files.  This class provides a restricted (Stream only) writing API for writing to files.
+ *
+ * Notably:
+ * - we keep a simple xor hash of all characters that were written.
+ * - We do not allow seeking (because we want to maintain our hash)
+ * - we provide an close() method which is similar to close but returns false if we were unable to successfully write the
+ * file.  Also this method
+ * - atomically replaces any old version of the file on the disk with our new file (after first rereading the file from the disk
+ * to confirm the hash matches)
+ * - Some files are super huge so we can't do the full atomic rename/copy (because of filesystem size limits).  If !fullAtomic
+ * then we still do the readback to verify file is valid so higher level code can handle failures.
+ */
+class SafeFile : public Print
+{
+  public:
+    SafeFile(char const *filepath, bool fullAtomic = false);
+
+    virtual size_t write(uint8_t);
+    virtual size_t write(const uint8_t *buffer, size_t size);
+
+    /**
+     * Atomically close the file (deleting any old versions) and readback the contents to confirm the hash matches
+     *
+     * @return false for failure
+     */
+    bool close();
+
+  private:
+    /// Read our (closed) tempfile back in and compare the hash
+    bool testReadback();
+
+    String filename;
+    File f;
+    bool fullAtomic;
+    uint8_t hash = 0;
+};
+
+#endif

src/SerialConsole.cpp

@@ -7,8 +7,12 @@
 #ifdef RP2040_SLOW_CLOCK
 #define Port Serial2
 #else
+#ifdef USER_DEBUG_PORT // change by WayenWeng
+#define Port USER_DEBUG_PORT
+#else
 #define Port Serial
 #endif
+#endif
 // Defaulting to the formerly removed phone_timeout_secs value of 15 minutes
 #define SERIAL_CONNECTION_TIMEOUT (15 * 60) * 1000UL
 
@@ -79,7 +83,7 @@ bool SerialConsole::checkIsConnected()
 bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 {
     // only talk to the API once the configuration has been loaded and we're sure the serial port is not disabled.
-    if (config.has_lora && config.device.serial_enabled) {
+    if (config.has_lora && config.security.serial_enabled) {
         // Switch to protobufs for log messages
         usingProtobufs = true;
         canWrite = true;
@@ -92,7 +96,7 @@ bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 
 void SerialConsole::log_to_serial(const char *logLevel, const char *format, va_list arg)
 {
-    if (usingProtobufs) {
+    if (usingProtobufs && config.security.debug_log_api_enabled) {
         meshtastic_LogRecord_Level ll = meshtastic_LogRecord_Level_UNSET; // default to unset
         switch (logLevel[0]) {
         case 'D':
@@ -116,4 +120,4 @@ void SerialConsole::log_to_serial(const char *logLevel, const char *format, va_l
         emitLogRecord(ll, thread ? thread->ThreadName.c_str() : "", format, arg);
     } else
         RedirectablePrint::log_to_serial(logLevel, format, arg);
-}
+}

src/configuration.h

@@ -52,10 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Configuration
 // -----------------------------------------------------------------------------
 
-// If we are using the JTAG port for debugging, some pins must be left free for that (and things like GPS have to be disabled)
-// we don't support jtag on the ttgo - access to gpio 12 is a PITA
-#define REQUIRE_RADIO true // If true, we will fail to start if the radio is not found
-
 /// Convert a preprocessor name into a quoted string
 #define xstr(s) ystr(s)
 #define ystr(s) #s
@@ -171,10 +167,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------
-#ifndef GPS_BAUDRATE
-#define GPS_BAUDRATE 9600
-#endif
-
 #ifndef GPS_THREAD_INTERVAL
 #define GPS_THREAD_INTERVAL 200
 #endif
@@ -185,6 +177,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Step #1: offer chance for variant-specific defines */
 #include "variant.h"
 
+#ifndef GPS_BAUDRATE
+#define GPS_BAUDRATE 9600
+#endif
+
 /* Step #2: follow with defines common to the architecture;
    also enable HAS_ option not specifically disabled by variant.h */
 #include "architecture.h"
@@ -197,6 +193,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEFAULT_SHUTDOWN_SECONDS 2
 #endif
 
+#ifndef MINIMUM_SAFE_FREE_HEAP
+#define MINIMUM_SAFE_FREE_HEAP 1500
+#endif
+
 /* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
 
 #ifndef HAS_WIFI
@@ -259,6 +259,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_SCREEN 1
 #define MESHTASTIC_EXCLUDE_MQTT 1
 #define MESHTASTIC_EXCLUDE_POWERMON 1
+#define MESHTASTIC_EXCLUDE_I2C 1
+#define MESHTASTIC_EXCLUDE_PKI 1
+#define MESHTASTIC_EXCLUDE_POWER_FSM 1
+#define MESHTASTIC_EXCLUDE_TZ 1
 #endif
 
 // Turn off all optional modules
@@ -272,6 +276,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_RANGETEST 1
 #define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
 #define MESHTASTIC_EXCLUDE_STOREFORWARD 1
+#define MESHTASTIC_EXCLUDE_TEXTMESSAGE 1
 #define MESHTASTIC_EXCLUDE_ATAK 1
 #define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
 #define MESHTASTIC_EXCLUDE_NEIGHBORINFO 1
@@ -280,6 +285,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MESHTASTIC_EXCLUDE_INPUTBROKER 1
 #define MESHTASTIC_EXCLUDE_SERIAL 1
 #define MESHTASTIC_EXCLUDE_POWERSTRESS 1
+#define MESHTASTIC_EXCLUDE_ADMIN 1
 #endif
 
 // // Turn off wifi even if HW supports wifi (webserver relies on wifi and is also disabled)

src/detect/ScanI2CTwoWire.cpp

@@ -1,7 +1,8 @@
 #include "ScanI2CTwoWire.h"
 
+#if !MESHTASTIC_EXCLUDE_I2C
+
 #include "concurrency/LockGuard.h"
-#include "configuration.h"
 #if defined(ARCH_PORTDUINO)
 #include "linux/LinuxHardwareI2C.h"
 #endif
@@ -314,7 +315,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
 
             case SHT31_4x_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
-                if (registerValue == 0x11a2 || registerValue == 0x11da) {
+                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c) {
                     type = SHT4X;
                     LOG_INFO("SHT4X sensor found\n");
                 } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
@@ -403,3 +404,4 @@ size_t ScanI2CTwoWire::countDevices() const
 {
     return foundDevices.size();
 }
+#endif

src/detect/ScanI2CTwoWire.h

@@ -1,5 +1,8 @@
 #pragma once
 
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_I2C
+
 #include <map>
 #include <memory>
 #include <stddef.h>
@@ -55,4 +58,5 @@ class ScanI2CTwoWire : public ScanI2C
     uint16_t getRegisterValue(const RegisterLocation &, ResponseWidth) const;
 
     DeviceType probeOLED(ScanI2C::DeviceAddress) const;
-};
+};
+#endif

src/freertosinc.h

@@ -12,7 +12,7 @@
 #include <freertos/task.h>
 #endif
 
-#if defined(ARDUINO_NRF52_ADAFRUIT) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_RP2040)
+#if defined(ARDUINO_NRF52_ADAFRUIT) || defined(ARDUINO_ARCH_RP2040)
 #define HAS_FREE_RTOS
 
 #include <FreeRTOS.h>

src/gps/GPS.cpp

@@ -9,6 +9,7 @@
 #include "main.h" // pmu_found
 #include "sleep.h"
 
+#include "GPSUpdateScheduling.h"
 #include "cas.h"
 #include "ubx.h"
 
@@ -22,19 +23,6 @@
 #define GPS_RESET_MODE HIGH
 #endif
 
-// How many minutes of sleep make it worthwhile to power-off the GPS
-// Shorter than this, and GPS will only enter standby
-// Affected by lock-time, and config.position.gps_update_interval
-#ifndef GPS_STANDBY_THRESHOLD_MINUTES
-#define GPS_STANDBY_THRESHOLD_MINUTES 15
-#endif
-
-// How many seconds of sleep make it worthwhile for the GPS to use powered-on standby
-// Shorter than this, and we'll just wait instead
-#ifndef GPS_IDLE_THRESHOLD_SECONDS
-#define GPS_IDLE_THRESHOLD_SECONDS 10
-#endif
-
 #if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #else
@@ -43,6 +31,8 @@ HardwareSerial *GPS::_serial_gps = NULL;
 
 GPS *gps = nullptr;
 
+GPSUpdateScheduling scheduling;
+
 /// Multiple GPS instances might use the same serial port (in sequence), but we can
 /// only init that port once.
 static bool didSerialInit;
@@ -52,6 +42,25 @@ uint8_t uBloxProtocolVersion;
 #define GPS_SOL_EXPIRY_MS 5000 // in millis. give 1 second time to combine different sentences. NMEA Frequency isn't higher anyway
 #define NMEA_MSG_GXGSA "GNGSA" // GSA message (GPGSA, GNGSA etc)
 
+// For logging
+const char *getGPSPowerStateString(GPSPowerState state)
+{
+    switch (state) {
+    case GPS_ACTIVE:
+        return "ACTIVE";
+    case GPS_IDLE:
+        return "IDLE";
+    case GPS_SOFTSLEEP:
+        return "SOFTSLEEP";
+    case GPS_HARDSLEEP:
+        return "HARDSLEEP";
+    case GPS_OFF:
+        return "OFF";
+    default:
+        assert(false); // Unhandled enum value..
+    }
+}
+
 void GPS::UBXChecksum(uint8_t *message, size_t length)
 {
     uint8_t CK_A = 0, CK_B = 0;
@@ -391,9 +400,13 @@ bool GPS::setup()
     int msglen = 0;
 
     if (!didSerialInit) {
-#if !defined(GPS_UC6580)
-
         if (tx_gpio && gnssModel == GNSS_MODEL_UNKNOWN) {
+
+            // if GPS_BAUDRATE is specified in variant (i.e. not 9600), skip to the specified rate.
+            if (speedSelect == 0 && GPS_BAUDRATE != serialSpeeds[speedSelect]) {
+                speedSelect = std::find(serialSpeeds, std::end(serialSpeeds), GPS_BAUDRATE) - serialSpeeds;
+            }
+
             LOG_DEBUG("Probing for GPS at %d \n", serialSpeeds[speedSelect]);
             gnssModel = probe(serialSpeeds[speedSelect]);
             if (gnssModel == GNSS_MODEL_UNKNOWN) {
@@ -409,9 +422,6 @@ bool GPS::setup()
         } else {
             gnssModel = GNSS_MODEL_UNKNOWN;
         }
-#else
-        gnssModel = GNSS_MODEL_UC6580;
-#endif
 
         if (gnssModel == GNSS_MODEL_MTK) {
             /*
@@ -494,6 +504,22 @@ bool GPS::setup()
             delay(250);
             _serial_gps->write("$CFGMSG,6,1,0\r\n");
             delay(250);
+        } else if (gnssModel == GNSS_MODEL_AG3335) {
+
+            _serial_gps->write("$PAIR066,1,0,1,0,0,1*3B"); // Enable GPS+GALILEO+NAVIC
+
+            // Configure NMEA (sentences will output once per fix)
+            _serial_gps->write("$PAIR062,0,0*3F"); // GGA ON
+            _serial_gps->write("$PAIR062,1,0*3F"); // GLL OFF
+            _serial_gps->write("$PAIR062,2,1*3D"); // GSA ON
+            _serial_gps->write("$PAIR062,3,0*3D"); // GSV OFF
+            _serial_gps->write("$PAIR062,4,0*3B"); // RMC ON
+            _serial_gps->write("$PAIR062,5,0*3B"); // VTG OFF
+            _serial_gps->write("$PAIR062,6,1*39"); // ZDA ON
+
+            delay(250);
+            _serial_gps->write("$PAIR513*3D"); // save configuration
+
         } else if (gnssModel == GNSS_MODEL_UBLOX) {
             // Configure GNSS system to GPS+SBAS+GLONASS (Module may restart after this command)
             // We need set it because by default it is GPS only, and we want to use GLONASS too
@@ -767,7 +793,6 @@ bool GPS::setup()
     }
 
     notifyDeepSleepObserver.observe(&notifyDeepSleep);
-    notifyGPSSleepObserver.observe(&notifyGPSSleep);
 
     return true;
 }
@@ -776,124 +801,201 @@ GPS::~GPS()
 {
     // we really should unregister our sleep observer
     notifyDeepSleepObserver.unobserve(&notifyDeepSleep);
-    notifyGPSSleepObserver.observe(&notifyGPSSleep);
 }
-
-const char *GPS::powerStateToString()
+// Put the GPS hardware into a specified state
+void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
 {
-    switch (powerState) {
-    case GPS_OFF:
-        return "OFF";
-    case GPS_IDLE:
-        return "IDLE";
-    case GPS_STANDBY:
-        return "STANDBY";
+    // Update the stored GPSPowerstate, and create local copies
+    GPSPowerState oldState = powerState;
+    powerState = newState;
+    LOG_INFO("GPS power state moving from %s to %s\n", getGPSPowerStateString(oldState), getGPSPowerStateString(newState));
+
+#ifdef HELTEC_MESH_NODE_T114
+    if ((oldState == GPS_OFF || oldState == GPS_HARDSLEEP) && (newState != GPS_OFF && newState != GPS_HARDSLEEP)) {
+        _serial_gps->begin(serialSpeeds[speedSelect]);
+    } else if ((newState == GPS_OFF || newState == GPS_HARDSLEEP) && (oldState != GPS_OFF && oldState != GPS_HARDSLEEP)) {
+        _serial_gps->end();
+    }
+#endif
+    switch (newState) {
     case GPS_ACTIVE:
-        return "ACTIVE";
-    default:
-        return "UNKNOWN";
+    case GPS_IDLE:
+        if (oldState == GPS_ACTIVE || oldState == GPS_IDLE) // If hardware already awake, no changes needed
+            break;
+        if (oldState != GPS_ACTIVE && oldState != GPS_IDLE) // If hardware just waking now, clear buffer
+            clearBuffer();
+        powerMon->setState(meshtastic_PowerMon_State_GPS_Active); // Report change for power monitoring (during testing)
+        writePinEN(true);                                         // Power (EN pin): on
+        setPowerPMU(true);                                        // Power (PMU): on
+        writePinStandby(false);                                   // Standby (pin): awake (not standby)
+        setPowerUBLOX(true);                                      // Standby (UBLOX): awake
+        break;
+
+    case GPS_SOFTSLEEP:
+        powerMon->clearState(meshtastic_PowerMon_State_GPS_Active); // Report change for power monitoring (during testing)
+        writePinEN(true);                                           // Power (EN pin): on
+        setPowerPMU(true);                                          // Power (PMU): on
+        writePinStandby(true);                                      // Standby (pin): asleep (not awake)
+        setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
+        break;
+
+    case GPS_HARDSLEEP:
+        powerMon->clearState(meshtastic_PowerMon_State_GPS_Active); // Report change for power monitoring (during testing)
+        writePinEN(false);                                          // Power (EN pin): off
+        setPowerPMU(false);                                         // Power (PMU): off
+        writePinStandby(true);                                      // Standby (pin): asleep (not awake)
+        setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
+#ifdef GNSS_AIROHA
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
+#endif
+        break;
+
+    case GPS_OFF:
+        assert(sleepTime == 0);                                     // This is an indefinite sleep
+        powerMon->clearState(meshtastic_PowerMon_State_GPS_Active); // Report change for power monitoring (during testing)
+        writePinEN(false);                                          // Power (EN pin): off
+        setPowerPMU(false);                                         // Power (PMU): off
+        writePinStandby(true);                                      // Standby (pin): asleep
+        setPowerUBLOX(false, 0);                                    // Standby (UBLOX): asleep, indefinitely
+#ifdef GNSS_AIROHA
+        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
+#endif
+        break;
     }
 }
 
-void GPS::setGPSPower(bool on, bool standbyOnly, uint32_t sleepTime)
+// Set power with EN pin, if relevant
+void GPS::writePinEN(bool on)
 {
-    // Record the current powerState
-    if (on)
-        powerState = GPS_ACTIVE;
-    else if (!enabled) // User has disabled with triple press
-        powerState = GPS_OFF;
-    else if (sleepTime <= GPS_IDLE_THRESHOLD_SECONDS * 1000UL)
-        powerState = GPS_IDLE;
-    else if (standbyOnly)
-        powerState = GPS_STANDBY;
-    else
-        powerState = GPS_OFF;
-
-    LOG_DEBUG("GPS::powerState=%s\n", powerStateToString());
-
-    // If the next update is due *really soon*, don't actually power off or enter standby. Just wait it out.
-    if (!on && powerState == GPS_IDLE)
+    // Abort: if conflict with Canned Messages when using Wisblock(?)
+    if (HW_VENDOR == meshtastic_HardwareModel_RAK4631 && (rotaryEncoderInterruptImpl1 || upDownInterruptImpl1))
         return;
 
-    if (on) {
-        powerMon->setState(meshtastic_PowerMon_State_GPS_Active);
-        clearBuffer(); // drop any old data waiting in the buffer before re-enabling
-        if (en_gpio)
-            digitalWrite(en_gpio, on ? GPS_EN_ACTIVE : !GPS_EN_ACTIVE); // turn this on if defined, every time
-    } else {
-        powerMon->clearState(meshtastic_PowerMon_State_GPS_Active);
-    }
-    isInPowersave = !on;
-    if (!standbyOnly && en_gpio != 0 &&
-        !(HW_VENDOR == meshtastic_HardwareModel_RAK4631 && (rotaryEncoderInterruptImpl1 || upDownInterruptImpl1))) {
-        LOG_DEBUG("GPS powerdown using GPS_EN_ACTIVE\n");
-        digitalWrite(en_gpio, on ? GPS_EN_ACTIVE : !GPS_EN_ACTIVE);
+    // Abort: if pin unset
+    if (!en_gpio)
         return;
-    }
-#ifdef HAS_PMU // We only have PMUs on the T-Beam, and that board has a tiny battery to save GPS ephemera, so treat as a standby.
-    if (pmu_found && PMU) {
-        uint8_t model = PMU->getChipModel();
-        if (model == XPOWERS_AXP2101) {
-            if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
-                // t-beam v1.2 GNSS power channel
-                on ? PMU->enablePowerOutput(XPOWERS_ALDO3) : PMU->disablePowerOutput(XPOWERS_ALDO3);
-            } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE) {
-                // t-beam-s3-core GNSS  power channel
-                on ? PMU->enablePowerOutput(XPOWERS_ALDO4) : PMU->disablePowerOutput(XPOWERS_ALDO4);
-            }
-        } else if (model == XPOWERS_AXP192) {
-            // t-beam v1.1 GNSS  power channel
-            on ? PMU->enablePowerOutput(XPOWERS_LDO3) : PMU->disablePowerOutput(XPOWERS_LDO3);
-        }
-        return;
-    }
+
+    // Determine new value for the pin
+    bool val = GPS_EN_ACTIVE ? on : !on;
+
+    // Write and log
+    pinMode(en_gpio, OUTPUT);
+    digitalWrite(en_gpio, val);
+#ifdef GPS_EXTRAVERBOSE
+    LOG_DEBUG("Pin EN %s\n", val == HIGH ? "HIGH" : "LOW");
 #endif
+}
+
+// Set the value of the STANDBY pin, if relevant
+// true for standby state, false for awake
+void GPS::writePinStandby(bool standby)
+{
 #ifdef PIN_GPS_STANDBY // Specifically the standby pin for L76B, L76K and clones
-    if (on) {
-        LOG_INFO("Waking GPS\n");
-        pinMode(PIN_GPS_STANDBY, OUTPUT);
-        // Some PCB's use an inverse logic due to a transistor driver
-        // Example for this is the Pico-Waveshare Lora+GPS HAT
+
+// Determine the new value for the pin
+// Normally: active HIGH for awake
 #ifdef PIN_GPS_STANDBY_INVERTED
-        digitalWrite(PIN_GPS_STANDBY, 0);
+    bool val = standby;
 #else
-        digitalWrite(PIN_GPS_STANDBY, 1);
+    bool val = !standby;
 #endif
-        return;
-    } else {
-        LOG_INFO("GPS entering sleep\n");
-        // notifyGPSSleep.notifyObservers(NULL);
-        pinMode(PIN_GPS_STANDBY, OUTPUT);
-#ifdef PIN_GPS_STANDBY_INVERTED
-        digitalWrite(PIN_GPS_STANDBY, 1);
-#else
-        digitalWrite(PIN_GPS_STANDBY, 0);
+
+    // Write and log
+    pinMode(PIN_GPS_STANDBY, OUTPUT);
+    digitalWrite(PIN_GPS_STANDBY, val);
+#ifdef GPS_EXTRAVERBOSE
+    LOG_DEBUG("Pin STANDBY %s\n", val == HIGH ? "HIGH" : "LOW");
 #endif
+#endif
+}
+
+// Enable / Disable GPS with PMU, if present
+void GPS::setPowerPMU(bool on)
+{
+    // We only have PMUs on the T-Beam, and that board has a tiny battery to save GPS ephemera,
+    // so treat as a standby.
+#ifdef HAS_PMU
+    // Abort: if no PMU
+    if (!pmu_found)
         return;
+
+    // Abort: if PMU not initialized
+    if (!PMU)
+        return;
+
+    uint8_t model = PMU->getChipModel();
+    if (model == XPOWERS_AXP2101) {
+        if (HW_VENDOR == meshtastic_HardwareModel_TBEAM) {
+            // t-beam v1.2 GNSS power channel
+            on ? PMU->enablePowerOutput(XPOWERS_ALDO3) : PMU->disablePowerOutput(XPOWERS_ALDO3);
+        } else if (HW_VENDOR == meshtastic_HardwareModel_LILYGO_TBEAM_S3_CORE) {
+            // t-beam-s3-core GNSS  power channel
+            on ? PMU->enablePowerOutput(XPOWERS_ALDO4) : PMU->disablePowerOutput(XPOWERS_ALDO4);
+        }
+    } else if (model == XPOWERS_AXP192) {
+        // t-beam v1.1 GNSS  power channel
+        on ? PMU->enablePowerOutput(XPOWERS_LDO3) : PMU->disablePowerOutput(XPOWERS_LDO3);
     }
+
+#ifdef GPS_EXTRAVERBOSE
+    LOG_DEBUG("PMU %s\n", on ? "on" : "off");
 #endif
-    if (!on) {
-        if (gnssModel == GNSS_MODEL_UBLOX) {
-            uint8_t msglen;
-            LOG_DEBUG("Sleep Time: %i\n", sleepTime);
-            if (strncmp(info.hwVersion, "000A0000", 8) != 0) {
-                for (int i = 0; i < 4; i++) {
-                    gps->_message_PMREQ[0 + i] = sleepTime >> (i * 8); // Encode the sleep time in millis into the packet
-                }
-                msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ), gps->_message_PMREQ);
-            } else {
-                for (int i = 0; i < 4; i++) {
-                    gps->_message_PMREQ_10[4 + i] = sleepTime >> (i * 8); // Encode the sleep time in millis into the packet
-                }
-                msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ_10), gps->_message_PMREQ_10);
-            }
-            gps->_serial_gps->write(gps->UBXscratch, msglen);
+#endif
+}
+
+// Set UBLOX power, if relevant
+void GPS::setPowerUBLOX(bool on, uint32_t sleepMs)
+{
+    // Abort: if not UBLOX hardware
+    if (gnssModel != GNSS_MODEL_UBLOX)
+        return;
+
+    // If waking
+    if (on) {
+        gps->_serial_gps->write(0xFF);
+        clearBuffer(); // This often returns old data, so drop it
+#ifdef GPS_EXTRAVERBOSE
+        LOG_DEBUG("UBLOX: wake\n");
+#endif
+    }
+
+    // If putting to sleep
+    else {
+        uint8_t msglen;
+
+        // If we're being asked to sleep indefinitely, make *sure* we're awake first, to process the new sleep command
+        if (sleepMs == 0) {
+            setPowerUBLOX(true);
+            delay(500);
         }
-    } else {
-        if (gnssModel == GNSS_MODEL_UBLOX) {
-            gps->_serial_gps->write(0xFF);
-            clearBuffer(); // This often returns old data, so drop it
+
+        // Determine hardware version
+        if (strncmp(info.hwVersion, "000A0000", 8) != 0) {
+            // Encode the sleep time in millis into the packet
+            for (int i = 0; i < 4; i++)
+                gps->_message_PMREQ[0 + i] = sleepMs >> (i * 8);
+
+            // Record the message length
+            msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ), gps->_message_PMREQ);
+        } else {
+            // Encode the sleep time in millis into the packet
+            for (int i = 0; i < 4; i++)
+                gps->_message_PMREQ_10[4 + i] = sleepMs >> (i * 8);
+
+            // Record the message length
+            msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ_10), gps->_message_PMREQ_10);
         }
+
+        // Send the UBX packet
+        gps->_serial_gps->write(gps->UBXscratch, msglen);
+
+#ifdef GPS_EXTRAVERBOSE
+        LOG_DEBUG("UBLOX: sleep for %dmS\n", sleepMs);
+#endif
     }
 }
 
@@ -906,108 +1008,54 @@ void GPS::setConnected()
     }
 }
 
-/**
- * Switch the GPS into a mode where we are actively looking for a lock, or alternatively switch GPS into a low power mode
- *
- * calls sleep/wake
- */
-void GPS::setAwake(bool wantAwake)
+// We want a GPS lock. Wake the hardware
+void GPS::up()
 {
+    scheduling.informSearching();
+    setPowerState(GPS_ACTIVE);
+}
 
-    // If user has disabled GPS, make sure it is off, not just in standby or idle
-    if (!wantAwake && !enabled && powerState != GPS_OFF) {
-        setGPSPower(false, false, 0);
-        return;
-    }
+// We've got a GPS lock. Enter a low power state, potentially.
+void GPS::down()
+{
+    scheduling.informGotLock();
+    uint32_t predictedSearchDuration = scheduling.predictedSearchDurationMs();
+    uint32_t sleepTime = scheduling.msUntilNextSearch();
+    uint32_t updateInterval = Default::getConfiguredOrDefaultMs(config.position.gps_update_interval);
 
-    // If GPS power state needs to change
-    if ((wantAwake && powerState != GPS_ACTIVE) || (!wantAwake && powerState == GPS_ACTIVE)) {
-        LOG_DEBUG("WANT GPS=%d\n", wantAwake);
+    LOG_DEBUG("%us until next search\n", sleepTime / 1000);
 
-        // Calculate how long it takes to get a GPS lock
-        if (wantAwake) {
-            // Record the time we start looking for a lock
-            lastWakeStartMsec = millis();
-        } else {
-            // Record by how much we missed our ideal target postion.gps_update_interval (for logging only)
-            // Need to calculate this before we update lastSleepStartMsec, to make the new prediction
-            int32_t lateByMsec = (int32_t)(millis() - lastSleepStartMsec) - (int32_t)getSleepTime();
+    // If update interval less than 10 seconds, no attempt to sleep
+    if (updateInterval <= 10 * 1000UL)
+        setPowerState(GPS_IDLE);
 
-            // Record the time we finish looking for a lock
-            lastSleepStartMsec = millis();
-
-            // How long did it take to get GPS lock this time?
-            uint32_t lockTime = lastSleepStartMsec - lastWakeStartMsec;
-
-            // Update the lock-time prediction
-            // Used pre-emptively, attempting to hit target of gps.position_update_interval
-            switch (GPSCycles) {
-            case 0:
-                LOG_DEBUG("Initial GPS lock took %ds\n", lockTime / 1000);
-                break;
-            case 1:
-                predictedLockTime = lockTime; // Avoid slow ramp-up - start with a real value
-                LOG_DEBUG("GPS Lock took %ds\n", lockTime / 1000);
-                break;
-            default:
-                // Predict lock-time using exponential smoothing: respond slowly to changes
-                predictedLockTime = (lockTime * 0.2) + (predictedLockTime * 0.8); // Latest lock time has 20% weight on prediction
-                LOG_INFO("GPS Lock took %ds. %s by %ds. Next lock predicted to take %ds.\n", lockTime / 1000,
-                         (lateByMsec > 0) ? "Late" : "Early", abs(lateByMsec) / 1000, predictedLockTime / 1000);
-            }
-            GPSCycles++;
-        }
-
-        // How long to wait before attempting next GPS update
-        // Aims to hit position.gps_update_interval by using the lock-time prediction
-        uint32_t compensatedSleepTime = (getSleepTime() > predictedLockTime) ? (getSleepTime() - predictedLockTime) : 0;
-
-        // If long interval between updates: power off between updates
-        if (compensatedSleepTime > GPS_STANDBY_THRESHOLD_MINUTES * MS_IN_MINUTE) {
-            setGPSPower(wantAwake, false, getSleepTime() - predictedLockTime);
-        }
-
-        // If waking relatively frequently: don't power off. Would use more energy trying to reacquire lock each time
-        // We'll either use a "powered-on" standby, or just wait it out, depending on how soon the next update is due
-        // Will decide which inside setGPSPower method
-        else {
-#ifdef GPS_UC6580
-            setGPSPower(wantAwake, false, compensatedSleepTime);
-#else
-            setGPSPower(wantAwake, true, compensatedSleepTime);
+    else {
+        // Check whether the GPS hardware is capable of GPS_SOFTSLEEP
+        // If not, fallback to GPS_HARDSLEEP instead
+        bool softsleepSupported = false;
+        if (gnssModel == GNSS_MODEL_UBLOX) // U-blox is supported via PMREQ
+            softsleepSupported = true;
+#ifdef PIN_GPS_STANDBY // L76B, L76K and clones have a standby pin
+        softsleepSupported = true;
 #endif
-        }
+
+        // How long does gps_update_interval need to be, for GPS_HARDSLEEP to become more efficient than GPS_SOFTSLEEP?
+        // Heuristic equation. A compromise manually fitted to power observations from U-blox NEO-6M and M10050
+        // https://www.desmos.com/calculator/6gvjghoumr
+        // This is not particularly accurate, but probably an impromevement over a single, fixed threshold
+        uint32_t hardsleepThreshold = (2750 * pow(predictedSearchDuration / 1000, 1.22));
+        LOG_DEBUG("gps_update_interval >= %us needed to justify hardsleep\n", hardsleepThreshold / 1000);
+
+        // If update interval too short: softsleep (if supported by hardware)
+        if (softsleepSupported && updateInterval < hardsleepThreshold)
+            setPowerState(GPS_SOFTSLEEP, sleepTime);
+
+        // If update interval long enough (or softsleep unsupported): hardsleep instead
+        else
+            setPowerState(GPS_HARDSLEEP, sleepTime);
     }
 }
 
-/** Get how long we should stay looking for each acquisition in msecs
- */
-uint32_t GPS::getWakeTime() const
-{
-    uint32_t t = config.position.position_broadcast_secs;
-
-    if (t == UINT32_MAX)
-        return t; // already maxint
-
-    return Default::getConfiguredOrDefaultMs(t, default_broadcast_interval_secs);
-}
-
-/** Get how long we should sleep between aqusition attempts in msecs
- */
-uint32_t GPS::getSleepTime() const
-{
-    uint32_t t = config.position.gps_update_interval;
-
-    // We'll not need the GPS thread to wake up again after first acq. with fixed position.
-    if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED || config.position.fixed_position)
-        t = UINT32_MAX; // Sleep forever now
-
-    if (t == UINT32_MAX)
-        return t; // already maxint
-
-    return Default::getConfiguredOrDefaultMs(t, default_gps_update_interval);
-}
-
 void GPS::publishUpdate()
 {
     if (shouldPublish) {
@@ -1056,16 +1104,16 @@ int32_t GPS::runOnce()
         return disable();
     }
 
-    if (whileIdle()) {
+    if (whileActive()) {
         // if we have received valid NMEA claim we are connected
         setConnected();
     } else {
         if ((config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) && (gnssModel == GNSS_MODEL_UBLOX)) {
             // reset the GPS on next bootup
-            if (devicestate.did_gps_reset && (millis() - lastWakeStartMsec > 60000) && !hasFlow()) {
+            if (devicestate.did_gps_reset && scheduling.elapsedSearchMs() > 60 * 1000UL && !hasFlow()) {
                 LOG_DEBUG("GPS is not communicating, trying factory reset on next bootup.\n");
                 devicestate.did_gps_reset = false;
-                nodeDB->saveDeviceStateToDisk();
+                nodeDB->saveToDisk(SEGMENT_DEVICESTATE);
                 return disable(); // Stop the GPS thread as it can do nothing useful until next reboot.
             }
         }
@@ -1077,54 +1125,43 @@ int32_t GPS::runOnce()
         // gps->factoryReset();
     }
 
-    // If we are overdue for an update, turn on the GPS and at least publish the current status
-    uint32_t now = millis();
-    uint32_t timeAsleep = now - lastSleepStartMsec;
+    // If we're due for an update, wake the GPS
+    if (!config.position.fixed_position && powerState != GPS_ACTIVE && scheduling.isUpdateDue())
+        up();
 
-    auto sleepTime = getSleepTime();
-    if (powerState != GPS_ACTIVE && (sleepTime != UINT32_MAX) &&
-        ((timeAsleep > sleepTime) || (isInPowersave && timeAsleep > (sleepTime - predictedLockTime)))) {
-        // We now want to be awake - so wake up the GPS
-        setAwake(true);
+    // If we've already set time from the GPS, no need to ask the GPS
+    bool gotTime = (getRTCQuality() >= RTCQualityGPS);
+    if (!gotTime && lookForTime()) { // Note: we count on this && short-circuiting and not resetting the RTC time
+        gotTime = true;
+        shouldPublish = true;
     }
 
-    // While we are awake
-    if (powerState == GPS_ACTIVE) {
-        // LOG_DEBUG("looking for location\n");
-        // If we've already set time from the GPS, no need to ask the GPS
-        bool gotTime = (getRTCQuality() >= RTCQualityGPS);
-        if (!gotTime && lookForTime()) { // Note: we count on this && short-circuiting and not resetting the RTC time
-            gotTime = true;
-            shouldPublish = true;
-        }
+    bool gotLoc = lookForLocation();
+    if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
+        LOG_DEBUG("hasValidLocation RISING EDGE\n");
+        hasValidLocation = true;
+        shouldPublish = true;
+    }
 
-        bool gotLoc = lookForLocation();
-        if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
-            LOG_DEBUG("hasValidLocation RISING EDGE\n");
-            hasValidLocation = true;
-            shouldPublish = true;
-        }
+    bool tooLong = scheduling.searchedTooLong();
+    if (tooLong)
+        LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time.\n");
 
-        now = millis();
-        auto wakeTime = getWakeTime();
-        bool tooLong = wakeTime != UINT32_MAX && (now - lastWakeStartMsec) > wakeTime;
+    // Once we get a location we no longer desperately want an update
+    // LOG_DEBUG("gotLoc %d, tooLong %d, gotTime %d\n", gotLoc, tooLong, gotTime);
+    if ((gotLoc && gotTime) || tooLong) {
 
-        // Once we get a location we no longer desperately want an update
-        // LOG_DEBUG("gotLoc %d, tooLong %d, gotTime %d\n", gotLoc, tooLong, gotTime);
-        if ((gotLoc && gotTime) || tooLong) {
-
-            if (tooLong) {
-                // we didn't get a location during this ack window, therefore declare loss of lock
-                if (hasValidLocation) {
-                    LOG_DEBUG("hasValidLocation FALLING EDGE (last read: %d)\n", gotLoc);
-                }
-                p = meshtastic_Position_init_default;
-                hasValidLocation = false;
+        if (tooLong) {
+            // we didn't get a location during this ack window, therefore declare loss of lock
+            if (hasValidLocation) {
+                LOG_DEBUG("hasValidLocation FALLING EDGE\n");
             }
-
-            setAwake(false);
-            shouldPublish = true; // publish our update for this just finished acquisition window
+            p = meshtastic_Position_init_default;
+            hasValidLocation = false;
         }
+
+        down();
+        shouldPublish = true; // publish our update for this just finished acquisition window
     }
 
     // If state has changed do a publish
@@ -1150,15 +1187,13 @@ void GPS::clearBuffer()
 int GPS::prepareDeepSleep(void *unused)
 {
     LOG_INFO("GPS deep sleep!\n");
-
-    setAwake(false);
-
+    disable();
     return 0;
 }
 
 GnssModel_t GPS::probe(int serialSpeed)
 {
-#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_RP2040)
+#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)
     _serial_gps->end();
     _serial_gps->begin(serialSpeed);
 #else
@@ -1167,6 +1202,9 @@ GnssModel_t GPS::probe(int serialSpeed)
         _serial_gps->updateBaudRate(serialSpeed);
     }
 #endif
+#ifdef GNSS_AIROHA
+    return GNSS_MODEL_AG3335;
+#endif
 #ifdef GPS_DEBUG
     for (int i = 0; i < 20; i++) {
         getACK("$GP", 200);
@@ -1180,7 +1218,24 @@ GnssModel_t GPS::probe(int serialSpeed)
     _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
     delay(20);
 
-    // Get version information
+    // get version information from Unicore UFirebirdII Series
+    // Works for: UC6580, UM620, UM621, UM670A, UM680A, or UM681A
+    _serial_gps->write("$PDTINFO\r\n");
+    delay(750);
+    if (getACK("UC6580", 500) == GNSS_RESPONSE_OK) {
+        LOG_INFO("UC6580 detected, using UC6580 Module\n");
+        return GNSS_MODEL_UC6580;
+    }
+
+    clearBuffer();
+    _serial_gps->write("$PDTINFO\r\n");
+    delay(750);
+    if (getACK("UM600", 500) == GNSS_RESPONSE_OK) {
+        LOG_INFO("UM600 detected, using UC6580 Module\n");
+        return GNSS_MODEL_UC6580;
+    }
+
+    // Get version information for ATGM336H
     clearBuffer();
     _serial_gps->write("$PCAS06,1*1A\r\n");
     if (getACK("$GPTXT,01,01,02,HW=ATGM336H", 500) == GNSS_RESPONSE_OK) {
@@ -1188,6 +1243,26 @@ GnssModel_t GPS::probe(int serialSpeed)
         return GNSS_MODEL_ATGM336H;
     }
 
+    /* ATGM332D series (-11(GPS), -21(BDS), -31(GPS+BDS), -51(GPS+GLONASS), -71-0(GPS+BDS+GLONASS))
+    based on AT6558 */
+    clearBuffer();
+    _serial_gps->write("$PCAS06,1*1A\r\n");
+    if (getACK("$GPTXT,01,01,02,HW=ATGM332D", 500) == GNSS_RESPONSE_OK) {
+        LOG_INFO("ATGM332D detected, using ATGM336H Module\n");
+        return GNSS_MODEL_ATGM336H;
+    }
+
+    /* Airoha (Mediatek) AG3335A/M/S, A3352Q, Quectel L89 2.0, SimCom SIM65M */
+    clearBuffer();
+    _serial_gps->write("PAIR020*38\r\n");
+    if (getACK("$PAIR020,AG3335", 500) == GNSS_RESPONSE_OK) {
+        LOG_INFO("Aioha AG3335 detected, using AG3335 Module\n");
+        return GNSS_MODEL_AG3335;
+    }
+    // Get version information for Airoha AG3335
+    clearBuffer();
+    _serial_gps->write("$PMTK605*31\r\n");
+
     // Get version information
     clearBuffer();
     _serial_gps->write("$PCAS06,0*1B\r\n");
@@ -1233,7 +1308,7 @@ GnssModel_t GPS::probe(int serialSpeed)
         _serial_gps->write(_message_prt, sizeof(_message_prt));
         delay(500);
         serialSpeed = 9600;
-#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_RP2040)
+#if defined(ARCH_NRF52) || defined(ARCH_PORTDUINO) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)
         _serial_gps->end();
         _serial_gps->begin(serialSpeed);
 #else
@@ -1348,12 +1423,6 @@ GPS *GPS::createGps()
     new_gps->tx_gpio = _tx_gpio;
     new_gps->en_gpio = _en_gpio;
 
-    if (_en_gpio != 0) {
-        LOG_DEBUG("Setting %d to output.\n", _en_gpio);
-        pinMode(_en_gpio, OUTPUT);
-        digitalWrite(_en_gpio, !GPS_EN_ACTIVE);
-    }
-
 #ifdef PIN_GPS_PPS
     // pulse per second
     pinMode(PIN_GPS_PPS, INPUT);
@@ -1368,7 +1437,8 @@ GPS *GPS::createGps()
     LOG_DEBUG("Using " NMEA_MSG_GXGSA " for 3DFIX and PDOP\n");
 #endif
 
-    new_gps->setGPSPower(true, false, 0);
+    // Make sure the GPS is awake before performing any init.
+    new_gps->up();
 
 #ifdef PIN_GPS_RESET
     pinMode(PIN_GPS_RESET, OUTPUT);
@@ -1376,7 +1446,6 @@ GPS *GPS::createGps()
     delay(10);
     digitalWrite(PIN_GPS_RESET, !GPS_RESET_MODE);
 #endif
-    new_gps->setAwake(true); // Wake GPS power before doing any init
 
     if (_serial_gps) {
 #ifdef ARCH_ESP32
@@ -1392,13 +1461,6 @@ GPS *GPS::createGps()
 #else
         _serial_gps->begin(GPS_BAUDRATE);
 #endif
-
-        /*
-         * T-Beam-S3-Core will be preset to use gps Probe here, and other boards will not be changed first
-         */
-#if defined(GPS_UC6580)
-        _serial_gps->updateBaudRate(115200);
-#endif
     }
     return new_gps;
 }
@@ -1480,6 +1542,25 @@ bool GPS::factoryReset()
  */
 bool GPS::lookForTime()
 {
+
+#ifdef GNSS_AIROHA
+    uint8_t fix = reader.fixQuality();
+    uint32_t now = millis();
+    if (fix > 0) {
+        if (lastFixStartMsec > 0) {
+            if ((now - lastFixStartMsec) < GPS_FIX_HOLD_TIME) {
+                return false;
+            } else {
+                clearBuffer();
+            }
+        } else {
+            lastFixStartMsec = now;
+            return false;
+        }
+    } else {
+        return false;
+    }
+#endif
     auto ti = reader.time;
     auto d = reader.date;
     if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
@@ -1514,6 +1595,26 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
  */
 bool GPS::lookForLocation()
 {
+#ifdef GNSS_AIROHA
+    if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
+        uint8_t fix = reader.fixQuality();
+        uint32_t now = millis();
+        if (fix > 0) {
+            if (lastFixStartMsec > 0) {
+                if ((now - lastFixStartMsec) < GPS_FIX_HOLD_TIME) {
+                    return false;
+                } else {
+                    clearBuffer();
+                }
+            } else {
+                lastFixStartMsec = now;
+                return false;
+            }
+        } else {
+            return false;
+        }
+    }
+#endif
     // By default, TinyGPS++ does not parse GPGSA lines, which give us
     //   the 2D/3D fixType (see NMEAGPS.h)
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)
@@ -1662,13 +1763,13 @@ bool GPS::hasFlow()
     return reader.passedChecksum() > 0;
 }
 
-bool GPS::whileIdle()
+bool GPS::whileActive()
 {
     unsigned int charsInBuf = 0;
     bool isValid = false;
     if (powerState != GPS_ACTIVE) {
         clearBuffer();
-        return (powerState == GPS_ACTIVE);
+        return false;
     }
 #ifdef SERIAL_BUFFER_SIZE
     if (_serial_gps->available() >= SERIAL_BUFFER_SIZE - 1) {
@@ -1699,20 +1800,21 @@ bool GPS::whileIdle()
 }
 void GPS::enable()
 {
-    // Clear the old lock-time prediction
-    GPSCycles = 0;
-    predictedLockTime = 0;
+    // Clear the old scheduling info (reset the lock-time prediction)
+    scheduling.reset();
 
     enabled = true;
     setInterval(GPS_THREAD_INTERVAL);
-    setAwake(true);
+
+    scheduling.informSearching();
+    setPowerState(GPS_ACTIVE);
 }
 
 int32_t GPS::disable()
 {
     enabled = false;
     setInterval(INT32_MAX);
-    setAwake(false);
+    setPowerState(GPS_OFF);
 
     return INT32_MAX;
 }
@@ -1721,11 +1823,17 @@ void GPS::toggleGpsMode()
 {
     if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
         config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_DISABLED;
-        LOG_DEBUG("Flag set to false for gps power. GpsMode: DISABLED\n");
+        LOG_INFO("User toggled GpsMode. Now DISABLED.\n");
+#ifdef GNSS_AIROHA
+        if (powerState == GPS_ACTIVE) {
+            LOG_DEBUG("User power Off GPS\n");
+            digitalWrite(PIN_GPS_EN, LOW);
+        }
+#endif
         disable();
     } else if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_DISABLED) {
         config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_ENABLED;
-        LOG_DEBUG("Flag set to true to restore power. GpsMode: ENABLED\n");
+        LOG_INFO("User toggled GpsMode. Now ENABLED\n");
         enable();
     }
 }

src/gps/GPS.h

@@ -28,7 +28,8 @@ typedef enum {
     GNSS_MODEL_UBLOX,
     GNSS_MODEL_UC6580,
     GNSS_MODEL_UNKNOWN,
-    GNSS_MODEL_MTK_L76B
+    GNSS_MODEL_MTK_L76B,
+    GNSS_MODEL_AG3335
 } GnssModel_t;
 
 typedef enum {
@@ -39,17 +40,18 @@ typedef enum {
 } GPS_RESPONSE;
 
 enum GPSPowerState : uint8_t {
-    GPS_OFF = 0,     // Physically powered off
-    GPS_ACTIVE = 1,  // Awake and want a position
-    GPS_STANDBY = 2, // Physically powered on, but soft-sleeping
-    GPS_IDLE = 3,    // Awake, but not wanting another position yet
+    GPS_ACTIVE,    // Awake and want a position
+    GPS_IDLE,      // Awake, but not wanting another position yet
+    GPS_SOFTSLEEP, // Physically powered on, but soft-sleeping
+    GPS_HARDSLEEP, // Physically powered off, but scheduled to wake
+    GPS_OFF        // Powered off indefinitely
 };
 
 // Generate a string representation of DOP
 const char *getDOPString(uint32_t dop);
 
 /**
- * A gps class that only reads from the GPS periodically (and FIXME - eventually keeps the gps powered down except when reading)
+ * A gps class that only reads from the GPS periodically and keeps the gps powered down except when reading
  *
  * When new data is available it will notify observers.
  */
@@ -67,14 +69,11 @@ class GPS : private concurrency::OSThread
     uint8_t fixType = 0;      // fix type from GPGSA
 #endif
   private:
-    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0;
     const int serialSpeeds[6] = {9600, 4800, 38400, 57600, 115200, 9600};
-
+    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
     uint32_t en_gpio = 0;
-    uint32_t predictedLockTime = 0;
-    uint32_t GPSCycles = 0;
 
     int speedSelect = 0;
     int probeTries = 2;
@@ -99,7 +98,6 @@ class GPS : private concurrency::OSThread
     uint8_t numSatellites = 0;
 
     CallbackObserver<GPS, void *> notifyDeepSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
-    CallbackObserver<GPS, void *> notifyGPSSleepObserver = CallbackObserver<GPS, void *>(this, &GPS::prepareDeepSleep);
 
   public:
     /** If !NULL we will use this serial port to construct our GPS */
@@ -175,7 +173,8 @@ class GPS : private concurrency::OSThread
     // toggle between enabled/disabled
     void toggleGpsMode();
 
-    void setGPSPower(bool on, bool standbyOnly, uint32_t sleepTime);
+    // Change the power state of the GPS - for power saving / shutdown
+    void setPowerState(GPSPowerState newState, uint32_t sleepMs = 0);
 
     /// Returns true if we have acquired GPS lock.
     virtual bool hasLock();
@@ -206,18 +205,18 @@ class GPS : private concurrency::OSThread
 
     GPS_RESPONSE getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis);
 
-    /**
-     * Switch the GPS into a mode where we are actively looking for a lock, or alternatively switch GPS into a low power mode
-     *
-     * calls sleep/wake
-     */
-    void setAwake(bool on);
     virtual bool factoryReset();
 
     // Creates an instance of the GPS class.
     // Returns the new instance or null if the GPS is not present.
     static GPS *createGps();
 
+    // Wake the GPS hardware - ready for an update
+    void up();
+
+    // Let the GPS hardware save power between updates
+    void down();
+
   protected:
     /**
      * Perform any processing that should be done only while the GPS is awake and looking for a fix.
@@ -240,7 +239,7 @@ class GPS : private concurrency::OSThread
      *
      * Return true if we received a valid message from the GPS
      */
-    virtual bool whileIdle();
+    virtual bool whileActive();
 
     /**
      * Perform any processing that should be done only while the GPS is awake and looking for a fix.
@@ -267,13 +266,21 @@ class GPS : private concurrency::OSThread
     void UBXChecksum(uint8_t *message, size_t length);
     void CASChecksum(uint8_t *message, size_t length);
 
-    /** Get how long we should stay looking for each aquisition
+    /** Set power with EN pin, if relevant
      */
-    uint32_t getWakeTime() const;
+    void writePinEN(bool on);
 
-    /** Get how long we should sleep between aqusition attempts
+    /** Set the value of the STANDBY pin, if relevant
      */
-    uint32_t getSleepTime() const;
+    void writePinStandby(bool standby);
+
+    /** Set GPS power with PMU, if relevant
+     */
+    void setPowerPMU(bool on);
+
+    /** Set UBLOX power, if relevant
+     */
+    void setPowerUBLOX(bool on, uint32_t sleepMs = 0);
 
     /**
      * Tell users we have new GPS readings
@@ -296,4 +303,4 @@ class GPS : private concurrency::OSThread
 };
 
 extern GPS *gps;
-#endif // Exclude GPS
+#endif // Exclude GPS

src/gps/GPSUpdateScheduling.cpp

@@ -0,0 +1,118 @@
+#include "GPSUpdateScheduling.h"
+
+#include "Default.h"
+
+// Mark the time when searching for GPS position begins
+void GPSUpdateScheduling::informSearching()
+{
+    searchStartedMs = millis();
+}
+
+// Mark the time when searching for GPS is complete,
+// then update the predicted lock-time
+void GPSUpdateScheduling::informGotLock()
+{
+    searchEndedMs = millis();
+    LOG_DEBUG("Took %us to get lock\n", (searchEndedMs - searchStartedMs) / 1000);
+    updateLockTimePrediction();
+}
+
+// Clear old lock-time prediction data.
+// When re-enabling GPS with user button.
+void GPSUpdateScheduling::reset()
+{
+    searchStartedMs = 0;
+    searchEndedMs = 0;
+    searchCount = 0;
+    predictedMsToGetLock = 0;
+}
+
+// How many milliseconds before we should next search for GPS position
+// Used by GPS hardware directly, to enter timed hardware sleep
+uint32_t GPSUpdateScheduling::msUntilNextSearch()
+{
+    uint32_t now = millis();
+
+    // Target interval (seconds), between GPS updates
+    uint32_t updateInterval = Default::getConfiguredOrDefaultMs(config.position.gps_update_interval, default_gps_update_interval);
+
+    // Check how long until we should start searching, to hopefully hit our target interval
+    uint32_t dueAtMs = searchEndedMs + updateInterval;
+    uint32_t compensatedStart = dueAtMs - predictedMsToGetLock;
+    int32_t remainingMs = compensatedStart - now;
+
+    // If we should have already started (negative value), start ASAP
+    if (remainingMs < 0)
+        remainingMs = 0;
+
+    return (uint32_t)remainingMs;
+}
+
+// How long have we already been searching?
+// Used to abort a search in progress, if it runs unnaceptably long
+uint32_t GPSUpdateScheduling::elapsedSearchMs()
+{
+    // If searching
+    if (searchStartedMs > searchEndedMs)
+        return millis() - searchStartedMs;
+
+    // If not searching - 0ms. We shouldn't really consume this value
+    else
+        return 0;
+}
+
+// Is it now time to begin searching for a GPS position?
+bool GPSUpdateScheduling::isUpdateDue()
+{
+    return (msUntilNextSearch() == 0);
+}
+
+// Have we been searching for a GPS position for too long?
+bool GPSUpdateScheduling::searchedTooLong()
+{
+    uint32_t maxSearchMs =
+        Default::getConfiguredOrDefaultMs(config.position.position_broadcast_secs, default_broadcast_interval_secs);
+
+    // If broadcast interval set to max, no such thing as "too long"
+    if (maxSearchMs == UINT32_MAX)
+        return false;
+
+    // If we've been searching longer than our position broadcast interval: that's too long
+    else if (elapsedSearchMs() > maxSearchMs)
+        return true;
+
+    // Otherwise, not too long yet!
+    else
+        return false;
+}
+
+// Updates the predicted time-to-get-lock, by exponentially smoothing the latest observation
+void GPSUpdateScheduling::updateLockTimePrediction()
+{
+
+    // How long did it take to get GPS lock this time?
+    // Duration between down() calls
+    int32_t lockTime = searchEndedMs - searchStartedMs;
+    if (lockTime < 0)
+        lockTime = 0;
+
+    // Ignore the first lock-time: likely to be long, will skew data
+
+    // Second locktime: likely stable. Use to intialize the smoothing filter
+    if (searchCount == 1)
+        predictedMsToGetLock = lockTime;
+
+    // Third locktime and after: predict using exponential smoothing. Respond slowly to changes
+    else if (searchCount > 1)
+        predictedMsToGetLock = (lockTime * weighting) + (predictedMsToGetLock * (1 - weighting));
+
+    searchCount++; // Only tracked so we can diregard initial lock-times
+
+    LOG_DEBUG("Predicting %us to get next lock\n", predictedMsToGetLock / 1000);
+}
+
+// How long do we expect to spend searching for a lock?
+uint32_t GPSUpdateScheduling::predictedSearchDurationMs()
+{
+    return GPSUpdateScheduling::predictedMsToGetLock;
+}

src/gps/GPSUpdateScheduling.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include "configuration.h"
+
+// Encapsulates code responsible for the timing of GPS updates
+class GPSUpdateScheduling
+{
+  public:
+    // Marks the time of these events, for calculation use
+    void informSearching();
+    void informGotLock(); // Predicted lock-time is recalculated here
+
+    void reset();           // Reset the prediction - after GPS::disable() / GPS::enable()
+    bool isUpdateDue();     // Is it time to begin searching for a GPS position?
+    bool searchedTooLong(); // Have we been searching for too long?
+
+    uint32_t msUntilNextSearch(); // How long until we need to begin searching for a GPS? Info provided to GPS hardware for sleep
+    uint32_t elapsedSearchMs();   // How long have we been searching so far?
+    uint32_t predictedSearchDurationMs(); // How long do we expect to spend searching for a lock?
+
+  private:
+    void updateLockTimePrediction(); // Called from informGotLock
+    uint32_t searchStartedMs = 0;
+    uint32_t searchEndedMs = 0;
+    uint32_t searchCount = 0;
+    uint32_t predictedMsToGetLock = 0;
+
+    const float weighting = 0.2; // Controls exponential smoothing of lock-times prediction. 20% weighting of "latest lock-time".
+};

src/gps/GeoCoord.cpp

@@ -493,7 +493,7 @@ std::shared_ptr<GeoCoord> GeoCoord::pointAtDistance(double bearing, double range
  * The bearing in string format
  * @return Bearing in degrees
  */
-uint GeoCoord::bearingToDegrees(const char *bearing)
+unsigned int GeoCoord::bearingToDegrees(const char *bearing)
 {
     if (strcmp(bearing, "N") == 0)
         return 0;
@@ -537,7 +537,7 @@ uint GeoCoord::bearingToDegrees(const char *bearing)
  * The bearing in degrees
  * @return Bearing in string format
  */
-const char *GeoCoord::degreesToBearing(uint degrees)
+const char *GeoCoord::degreesToBearing(unsigned int degrees)
 {
     if (degrees >= 348 || degrees < 11)
         return "N";

src/gps/GeoCoord.h

@@ -117,8 +117,8 @@ class GeoCoord
     static float bearing(double lat1, double lon1, double lat2, double lon2);
     static float rangeRadiansToMeters(double range_radians);
     static float rangeMetersToRadians(double range_meters);
-    static uint bearingToDegrees(const char *bearing);
-    static const char *degreesToBearing(uint degrees);
+    static unsigned int bearingToDegrees(const char *bearing);
+    static const char *degreesToBearing(unsigned int degrees);
 
     // Point to point conversions
     int32_t distanceTo(const GeoCoord &pointB);

src/gps/RTC.cpp

@@ -6,6 +6,7 @@
 #include <time.h>
 
 static RTCQuality currentQuality = RTCQualityNone;
+uint32_t lastSetFromPhoneNtpOrGps = 0;
 
 RTCQuality getRTCQuality()
 {
@@ -121,6 +122,9 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
     if (shouldSet) {
         currentQuality = q;
         lastSetMsec = now;
+        if (currentQuality >= RTCQualityNTP) {
+            lastSetFromPhoneNtpOrGps = now;
+        }
 
         // This delta value works on all platforms
         timeStartMsec = now;
@@ -256,6 +260,7 @@ uint32_t getValidTime(RTCQuality minQuality, bool local)
 
 time_t gm_mktime(struct tm *tm)
 {
+#if !MESHTASTIC_EXCLUDE_TZ
     setenv("TZ", "GMT0", 1);
     time_t res = mktime(tm);
     if (*config.device.tzdef) {
@@ -264,4 +269,7 @@ time_t gm_mktime(struct tm *tm)
         setenv("TZ", "UTC0", 1);
     }
     return res;
+#else
+    return mktime(tm);
+#endif
 }

src/gps/RTC.h

@@ -24,6 +24,8 @@ enum RTCQuality {
 
 RTCQuality getRTCQuality();
 
+extern uint32_t lastSetFromPhoneNtpOrGps;
+
 /// If we haven't yet set our RTC this boot, set it from a GPS derived time
 bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
 bool perhapsSetRTC(RTCQuality q, struct tm &t);
@@ -43,4 +45,4 @@ time_t gm_mktime(struct tm *tm);
 
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
-#define SEC_PER_MIN 60
+#define SEC_PER_MIN 60

src/graphics/EInkDisplay2.cpp

@@ -156,7 +156,8 @@ bool EInkDisplay::connect()
         }
     }
 
-#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER)
+#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_VISION_MASTER_E213) ||             \
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER)
     {
         // Start HSPI
         hspi = new SPIClass(HSPI);
@@ -173,13 +174,13 @@ bool EInkDisplay::connect()
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
     }
-#elif defined(PCA10059)
+#elif defined(PCA10059) || defined(ME25LS01)
     {
         auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
         adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-        adafruitDisplay->init(115200, true, 10, false, SPI1, SPISettings(4000000, MSBFIRST, SPI_MODE0));
-        adafruitDisplay->setRotation(3);
-        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
+        adafruitDisplay->init(115200, true, 40, false, SPI1, SPISettings(4000000, MSBFIRST, SPI_MODE0));
+        adafruitDisplay->setRotation(0);
+        adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
 #elif defined(M5_COREINK)
     auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);

src/graphics/EInkDisplay2.h

@@ -5,11 +5,6 @@
 #include "GxEPD2_BW.h"
 #include <OLEDDisplay.h>
 
-#if defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER)
-// Re-enable SPI after deep sleep: rtc_gpio_hold_dis()
-#include "driver/rtc_io.h"
-#endif
-
 /**
  * An adapter class that allows using the GxEPD2 library as if it was an OLEDDisplay implementation.
  *
@@ -72,7 +67,8 @@ class EInkDisplay : public OLEDDisplay
     GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT> *adafruitDisplay = NULL;
 
     // If display uses HSPI
-#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
+#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_VISION_MASTER_E213) ||               \
+    defined(HELTEC_VISION_MASTER_E290) || defined(TLORA_T3S3_EPAPER)
     SPIClass *hspi = NULL;
 #endif
 

src/graphics/EInkDynamicDisplay.cpp

@@ -375,7 +375,7 @@ void EInkDynamicDisplay::hashImage()
 
     // Sum all bytes of the image buffer together
     for (uint16_t b = 0; b < (displayWidth / 8) * displayHeight; b++) {
-        imageHash += buffer[b];
+        imageHash ^= buffer[b] << b;
     }
 }
 

src/graphics/Screen.cpp

@@ -20,6 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 */
 #include "Screen.h"
+#include "../userPrefs.h"
+#include "PowerMon.h"
 #include "configuration.h"
 #if HAS_SCREEN
 #include <OLEDDisplay.h>
@@ -35,12 +37,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "gps/RTC.h"
 #include "graphics/ScreenFonts.h"
 #include "graphics/images.h"
+#include "input/ScanAndSelect.h"
 #include "input/TouchScreenImpl1.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
 #include "mesh/Channels.h"
 #include "mesh/generated/meshtastic/deviceonly.pb.h"
 #include "meshUtils.h"
+#include "modules/AdminModule.h"
 #include "modules/ExternalNotificationModule.h"
 #include "modules/TextMessageModule.h"
 #include "sleep.h"
@@ -119,7 +123,7 @@ static bool heartbeat = false;
 /// Check if the display can render a string (detect special chars; emoji)
 static bool haveGlyphs(const char *str)
 {
-#if defined(OLED_UA) || defined(OLED_RU)
+#if defined(OLED_PL) || defined(OLED_UA) || defined(OLED_RU)
     // Don't want to make any assumptions about custom language support
     return true;
 #endif
@@ -155,7 +159,11 @@ static void drawIconScreen(const char *upperMsg, OLEDDisplay *display, OLEDDispl
 
     display->setFont(FONT_MEDIUM);
     display->setTextAlignment(TEXT_ALIGN_LEFT);
+#ifdef SPLASH_TITLE_USERPREFS
+    const char *title = SPLASH_TITLE_USERPREFS;
+#else
     const char *title = "meshtastic.org";
+#endif
     display->drawString(x + getStringCenteredX(title), y + SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM, title);
     display->setFont(FONT_SMALL);
 
@@ -1085,7 +1093,8 @@ static void drawNodes(OLEDDisplay *display, int16_t x, int16_t y, const NodeStat
 {
     char usersString[20];
     snprintf(usersString, sizeof(usersString), "%d/%d", nodeStatus->getNumOnline(), nodeStatus->getNumTotal());
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) ||          \
+     defined(HX8357_CS)) &&                                                                                                      \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
     display->drawFastImage(x, y + 3, 8, 8, imgUser);
 #else
@@ -1485,6 +1494,10 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     screen->drawColumns(display, x, y, fields);
 }
 
+#if defined(ESP_PLATFORM) && defined(USE_ST7789)
+SPIClass SPI1(HSPI);
+#endif
+
 Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_OledType screenType, OLEDDISPLAY_GEOMETRY geometry)
     : concurrency::OSThread("Screen"), address_found(address), model(screenType), geometry(geometry), cmdQueue(32)
 {
@@ -1492,6 +1505,13 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #if defined(USE_SH1106) || defined(USE_SH1107) || defined(USE_SH1107_128_64)
     dispdev = new SH1106Wire(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
+#elif defined(USE_ST7789)
+#ifdef ESP_PLATFORM
+    dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT, ST7789_SDA,
+                            ST7789_MISO, ST7789_SCK);
+#else
+    dispdev = new ST7789Spi(&SPI1, ST7789_RESET, ST7789_RS, ST7789_NSS, GEOMETRY_RAWMODE, TFT_WIDTH, TFT_HEIGHT);
+#endif
 #elif defined(USE_SSD1306)
     dispdev = new SSD1306Wire(address.address, -1, -1, geometry,
                               (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
@@ -1557,6 +1577,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
     if (on != screenOn) {
         if (on) {
             LOG_INFO("Turning on screen\n");
+            powerMon->setState(meshtastic_PowerMon_State_Screen_On);
 #ifdef T_WATCH_S3
             PMU->enablePowerOutput(XPOWERS_ALDO2);
 #endif
@@ -1570,17 +1591,45 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOn();
-
+#ifdef USE_ST7789
+            pinMode(VTFT_CTRL, OUTPUT);
+            digitalWrite(VTFT_CTRL, LOW);
+            ui->init();
+#ifdef ESP_PLATFORM
+            analogWrite(VTFT_LEDA, BRIGHTNESS_DEFAULT);
+#else
+            pinMode(VTFT_LEDA, OUTPUT);
+            digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
+#endif
+#endif
             enabled = true;
             setInterval(0); // Draw ASAP
             runASAP = true;
         } else {
+            powerMon->clearState(meshtastic_PowerMon_State_Screen_On);
 #ifdef USE_EINK
             // eInkScreensaver parameter is usually NULL (default argument), default frame used instead
             setScreensaverFrames(einkScreensaver);
 #endif
             LOG_INFO("Turning off screen\n");
             dispdev->displayOff();
+#ifdef USE_ST7789
+            SPI1.end();
+#if defined(ARCH_ESP32)
+            pinMode(VTFT_LEDA, ANALOG);
+            pinMode(VTFT_CTRL, ANALOG);
+            pinMode(ST7789_RESET, ANALOG);
+            pinMode(ST7789_RS, ANALOG);
+            pinMode(ST7789_NSS, ANALOG);
+#else
+            nrf_gpio_cfg_default(VTFT_LEDA);
+            nrf_gpio_cfg_default(VTFT_CTRL);
+            nrf_gpio_cfg_default(ST7789_RESET);
+            nrf_gpio_cfg_default(ST7789_RS);
+            nrf_gpio_cfg_default(ST7789_NSS);
+#endif
+#endif
+
 #ifdef T_WATCH_S3
             PMU->disablePowerOutput(XPOWERS_ALDO2);
 #endif
@@ -1701,6 +1750,7 @@ void Screen::setup()
     powerStatusObserver.observe(&powerStatus->onNewStatus);
     gpsStatusObserver.observe(&gpsStatus->onNewStatus);
     nodeStatusObserver.observe(&nodeStatus->onNewStatus);
+    adminMessageObserver.observe(adminModule);
     if (textMessageModule)
         textMessageObserver.observe(textMessageModule);
     if (inputBroker)
@@ -1871,6 +1921,13 @@ int32_t Screen::runOnce()
         // standard screen loop handling here
         if (config.display.auto_screen_carousel_secs > 0 &&
             (millis() - lastScreenTransition) > (config.display.auto_screen_carousel_secs * 1000)) {
+
+// If an E-Ink display struggles with fast refresh, force carousel to use full refresh instead
+// Carousel is potentially a major source of E-Ink display wear
+#if !defined(EINK_BACKGROUND_USES_FAST)
+            EINK_ADD_FRAMEFLAG(dispdev, COSMETIC);
+#endif
+
             LOG_DEBUG("LastScreenTransition exceeded %ums transitioning to next frame\n", (millis() - lastScreenTransition));
             handleOnPress();
         }
@@ -1929,9 +1986,6 @@ void Screen::setWelcomeFrames()
 /// Determine which screensaver frame to use, then set the FrameCallback
 void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
 {
-    // Remember current frame, restore position at power-on
-    uint8_t frameNumber = ui->getUiState()->currentFrame;
-
     // Retain specified frame / overlay callback beyond scope of this method
     static FrameCallback screensaverFrame;
     static OverlayCallback screensaverOverlay;
@@ -1969,9 +2023,8 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
 #endif
 
     // Prepare now for next frame, shown when display wakes
-    ui->setOverlays(NULL, 0);       // Clear overlay
-    setFrames();                    // Return to normal display updates
-    ui->switchToFrame(frameNumber); // Attempt to return to same frame after power-on
+    ui->setOverlays(NULL, 0);  // Clear overlay
+    setFrames(FOCUS_PRESERVE); // Return to normal display updates, showing same frame as before screensaver, ideally
 
     // Pick a refresh method, for when display wakes
 #ifdef EINK_HASQUIRK_GHOSTING
@@ -1982,9 +2035,13 @@ void Screen::setScreensaverFrames(FrameCallback einkScreensaver)
 }
 #endif
 
-// restore our regular frame list
-void Screen::setFrames()
+// Regenerate the normal set of frames, focusing a specific frame if requested
+// Called when a frame should be added / removed, or custom frames should be cleared
+void Screen::setFrames(FrameFocus focus)
 {
+    uint8_t originalPosition = ui->getUiState()->currentFrame;
+    FramesetInfo fsi; // Location of specific frames, for applying focus parameter
+
     LOG_DEBUG("showing standard frames\n");
     showingNormalScreen = true;
 
@@ -2018,20 +2075,33 @@ void Screen::setFrames()
     // is the same offset into the moduleFrames vector
     // so that we can invoke the module's callback
     for (auto i = moduleFrames.begin(); i != moduleFrames.end(); ++i) {
-        normalFrames[numframes++] = drawModuleFrame;
+        // Draw the module frame, using the hack described above
+        normalFrames[numframes] = drawModuleFrame;
+
+        // Check if the module being drawn has requested focus
+        // We will honor this request later, if setFrames was triggered by a UIFrameEvent
+        MeshModule *m = *i;
+        if (m->isRequestingFocus())
+            fsi.positions.focusedModule = numframes;
+
+        numframes++;
     }
 
     LOG_DEBUG("Added modules.  numframes: %d\n", numframes);
 
     // If we have a critical fault, show it first
-    if (error_code)
+    fsi.positions.fault = numframes;
+    if (error_code) {
         normalFrames[numframes++] = drawCriticalFaultFrame;
+        focus = FOCUS_FAULT; // Change our "focus" parameter, to ensure we show the fault frame
+    }
 
 #ifdef T_WATCH_S3
     normalFrames[numframes++] = screen->digitalWatchFace ? &Screen::drawDigitalClockFrame : &Screen::drawAnalogClockFrame;
 #endif
 
     // If we have a text message - show it next, unless it's a phone message and we aren't using any special modules
+    fsi.positions.textMessage = numframes;
     if (devicestate.has_rx_text_message && shouldDrawMessage(&devicestate.rx_text_message)) {
         normalFrames[numframes++] = drawTextMessageFrame;
     }
@@ -2046,11 +2116,14 @@ void Screen::setFrames()
     //
     // Since frames are basic function pointers, we have to use a helper to
     // call a method on debugInfo object.
+    fsi.positions.log = numframes;
     normalFrames[numframes++] = &Screen::drawDebugInfoTrampoline;
 
     // call a method on debugInfoScreen object (for more details)
+    fsi.positions.settings = numframes;
     normalFrames[numframes++] = &Screen::drawDebugInfoSettingsTrampoline;
 
+    fsi.positions.wifi = numframes;
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
     if (isWifiAvailable()) {
         // call a method on debugInfoScreen object (for more details)
@@ -2058,6 +2131,7 @@ void Screen::setFrames()
     }
 #endif
 
+    fsi.frameCount = numframes; // Total framecount is used to apply FOCUS_PRESERVE
     LOG_DEBUG("Finished building frames. numframes: %d\n", numframes);
 
     ui->setFrames(normalFrames, numframes);
@@ -2071,6 +2145,55 @@ void Screen::setFrames()
     prevFrame = -1; // Force drawNodeInfo to pick a new node (because our list
                     // just changed)
 
+    // Focus on a specific frame, in the frame set we just created
+    switch (focus) {
+    case FOCUS_DEFAULT:
+        ui->switchToFrame(0); // First frame
+        break;
+    case FOCUS_FAULT:
+        ui->switchToFrame(fsi.positions.fault);
+        break;
+    case FOCUS_TEXTMESSAGE:
+        ui->switchToFrame(fsi.positions.textMessage);
+        break;
+    case FOCUS_MODULE:
+        // Whichever frame was marked by MeshModule::requestFocus(), if any
+        // If no module requested focus, will show the first frame instead
+        ui->switchToFrame(fsi.positions.focusedModule);
+        break;
+
+    case FOCUS_PRESERVE:
+        // If we can identify which type of frame "originalPosition" was, can move directly to it in the new frameset
+        FramesetInfo &oldFsi = this->framesetInfo;
+        if (originalPosition == oldFsi.positions.log)
+            ui->switchToFrame(fsi.positions.log);
+        else if (originalPosition == oldFsi.positions.settings)
+            ui->switchToFrame(fsi.positions.settings);
+        else if (originalPosition == oldFsi.positions.wifi)
+            ui->switchToFrame(fsi.positions.wifi);
+
+        // If frame count has decreased
+        else if (fsi.frameCount < oldFsi.frameCount) {
+            uint8_t numDropped = oldFsi.frameCount - fsi.frameCount;
+            // Move n frames backwards
+            if (numDropped <= originalPosition)
+                ui->switchToFrame(originalPosition - numDropped);
+            // Unless that would put us "out of bounds" (< 0)
+            else
+                ui->switchToFrame(0);
+        }
+
+        // If we're not sure exactly which frame we were on, at least return to the same frame number
+        // (node frames; module frames)
+        else
+            ui->switchToFrame(originalPosition);
+
+        break;
+    }
+
+    // Store the info about this frameset, for future setFrames calls
+    this->framesetInfo = fsi;
+
     setFastFramerate(); // Draw ASAP
 }
 
@@ -2184,6 +2307,11 @@ void Screen::handlePrint(const char *text)
 
 void Screen::handleOnPress()
 {
+    // If Canned Messages is using the "Scan and Select" input, dismiss the canned message frame when user button is pressed
+    // Minimize impact as a courtesy, as "scan and select" may be used as default config for some boards
+    if (scanAndSelectInput != nullptr && scanAndSelectInput->dismissCannedMessageFrame())
+        return;
+
     // If screen was off, just wake it, otherwise advance to next frame
     // If we are in a transition, the press must have bounced, drop it.
     if (ui->getUiState()->frameState == FIXED) {
@@ -2287,7 +2415,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #ifdef ARCH_ESP32
         if (millis() - storeForwardModule->lastHeartbeat >
             (storeForwardModule->heartbeatInterval * 1200)) { // no heartbeat, overlap a bit
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) ||          \
+     defined(HX8357_CS)) &&                                                                                                      \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                    imgQuestionL1);
@@ -2298,7 +2427,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
                                    imgQuestion);
 #endif
         } else {
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) ||          \
+     defined(HX8357_CS)) &&                                                                                                      \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
             display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 16, 8,
                                    imgSFL1);
@@ -2312,8 +2442,8 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 #endif
     } else {
         // TODO: Raspberry Pi supports more than just the one screen size
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS) ||           \
-     ARCH_PORTDUINO) &&                                                                                                          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) ||          \
+     defined(HX8357_CS) || ARCH_PORTDUINO) &&                                                                                    \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
         display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
                                imgInfoL1);
@@ -2525,7 +2655,7 @@ int Screen::handleStatusUpdate(const meshtastic::Status *arg)
     switch (arg->getStatusType()) {
     case STATUS_TYPE_NODE:
         if (showingNormalScreen && nodeStatus->getLastNumTotal() != nodeStatus->getNumTotal()) {
-            setFrames(); // Regen the list of screens
+            setFrames(FOCUS_PRESERVE); // Regen the list of screen frames (returning to same frame, if possible)
         }
         nodeDB->updateGUI = false;
         break;
@@ -2537,23 +2667,33 @@ int Screen::handleStatusUpdate(const meshtastic::Status *arg)
 int Screen::handleTextMessage(const meshtastic_MeshPacket *packet)
 {
     if (showingNormalScreen) {
-        setFrames(); // Regen the list of screens (will show new text message)
+        // Outgoing message
+        if (packet->from == 0)
+            setFrames(FOCUS_PRESERVE); // Return to same frame (quietly hiding the rx text message frame)
+
+        // Incoming message
+        else
+            setFrames(FOCUS_TEXTMESSAGE); // Focus on the new message
     }
 
     return 0;
 }
 
+// Triggered by MeshModules
 int Screen::handleUIFrameEvent(const UIFrameEvent *event)
 {
     if (showingNormalScreen) {
-        if (event->frameChanged) {
-            setFrames(); // Regen the list of screens (will show new text message)
-        } else if (event->needRedraw) {
+        // Regenerate the frameset, potentially honoring a module's internal requestFocus() call
+        if (event->action == UIFrameEvent::Action::REGENERATE_FRAMESET)
+            setFrames(FOCUS_MODULE);
+
+        // Regenerate the frameset, while attempting to maintain focus on the current frame
+        else if (event->action == UIFrameEvent::Action::REGENERATE_FRAMESET_BACKGROUND)
+            setFrames(FOCUS_PRESERVE);
+
+        // Don't regenerate the frameset, just re-draw whatever is on screen ASAP
+        else if (event->action == UIFrameEvent::Action::REDRAW_ONLY)
             setFastFramerate();
-            // TODO: We might also want switch to corresponding frame,
-            //       but we don't know the exact frame number.
-            // ui->switchToFrame(0);
-        }
     }
 
     return 0;
@@ -2588,6 +2728,24 @@ int Screen::handleInputEvent(const InputEvent *event)
     return 0;
 }
 
+int Screen::handleAdminMessage(const meshtastic_AdminMessage *arg)
+{
+    // Note: only selected admin messages notify this observer
+    // If you wish to handle a new type of message, you should modify AdminModule.cpp first
+
+    switch (arg->which_payload_variant) {
+    // Node removed manually (i.e. via app)
+    case meshtastic_AdminMessage_remove_by_nodenum_tag:
+        setFrames(FOCUS_PRESERVE);
+        break;
+
+    // Default no-op, in case the admin message observable gets used by other classes in future
+    default:
+        break;
+    }
+    return 0;
+}
+
 } // namespace graphics
 #else
 graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}

src/graphics/Screen.h

@@ -45,6 +45,8 @@ class Screen
 #include <SH1106Wire.h>
 #elif defined(USE_SSD1306)
 #include <SSD1306Wire.h>
+#elif defined(USE_ST7789)
+#include <ST7789Spi.h>
 #else
 // the SH1106/SSD1306 variant is auto-detected
 #include <AutoOLEDWire.h>
@@ -171,9 +173,11 @@ class Screen : public concurrency::OSThread
     CallbackObserver<Screen, const meshtastic_MeshPacket *> textMessageObserver =
         CallbackObserver<Screen, const meshtastic_MeshPacket *>(this, &Screen::handleTextMessage);
     CallbackObserver<Screen, const UIFrameEvent *> uiFrameEventObserver =
-        CallbackObserver<Screen, const UIFrameEvent *>(this, &Screen::handleUIFrameEvent);
+        CallbackObserver<Screen, const UIFrameEvent *>(this, &Screen::handleUIFrameEvent); // Sent by Mesh Modules
     CallbackObserver<Screen, const InputEvent *> inputObserver =
         CallbackObserver<Screen, const InputEvent *>(this, &Screen::handleInputEvent);
+    CallbackObserver<Screen, const meshtastic_AdminMessage *> adminMessageObserver =
+        CallbackObserver<Screen, const meshtastic_AdminMessage *>(this, &Screen::handleAdminMessage);
 
   public:
     explicit Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY);
@@ -318,6 +322,49 @@ class Screen : public concurrency::OSThread
         uint8_t last = LASTCHAR; // get last char
         LASTCHAR = ch;
 
+#if defined(OLED_PL)
+
+        switch (last) { // conversion depending on first UTF8-character
+        case 0xC2: {
+            SKIPREST = false;
+            return (uint8_t)ch;
+        }
+        case 0xC3: {
+
+            if (ch == 147)
+                return (uint8_t)(ch); // Ó
+            else if (ch == 179)
+                return (uint8_t)(148); // ó
+            else
+                return (uint8_t)(ch | 0xC0);
+            break;
+        }
+
+        case 0xC4: {
+            SKIPREST = false;
+            return (uint8_t)(ch);
+        }
+
+        case 0xC5: {
+            SKIPREST = false;
+            if (ch == 132)
+                return (uint8_t)(136); // ń
+            else if (ch == 186)
+                return (uint8_t)(137); // ź
+            else
+                return (uint8_t)(ch);
+            break;
+        }
+        }
+
+        // We want to strip out prefix chars for two-byte char formats
+        if (ch == 0xC2 || ch == 0xC3 || ch == 0xC4 || ch == 0xC5)
+            return (uint8_t)0;
+
+#endif
+
+#if defined(OLED_UA) || defined(OLED_RU)
+
         switch (last) { // conversion depending on first UTF8-character
         case 0xC2: {
             SKIPREST = false;
@@ -372,6 +419,8 @@ class Screen : public concurrency::OSThread
         if (ch == 0xC2 || ch == 0xC3 || ch == 0x82 || ch == 0xD0 || ch == 0xD1)
             return (uint8_t)0;
 
+#endif
+
         // If we already returned an unconvertable-character symbol for this unconvertable-character sequence, return NULs for the
         // rest of it
         if (SKIPREST)
@@ -392,6 +441,7 @@ class Screen : public concurrency::OSThread
     int handleTextMessage(const meshtastic_MeshPacket *arg);
     int handleUIFrameEvent(const UIFrameEvent *arg);
     int handleInputEvent(const InputEvent *arg);
+    int handleAdminMessage(const meshtastic_AdminMessage *arg);
 
     /// Used to force (super slow) eink displays to draw critical frames
     void forceDisplay(bool forceUiUpdate = false);
@@ -448,8 +498,34 @@ class Screen : public concurrency::OSThread
     void handleShowPrevFrame();
     void handlePrint(const char *text);
     void handleStartFirmwareUpdateScreen();
-    /// Rebuilds our list of frames (screens) to default ones.
-    void setFrames();
+
+    // Info collected by setFrames method.
+    // Index location of specific frames. Used to apply the FrameFocus parameter of setFrames
+    struct FramesetInfo {
+        struct FramePositions {
+            uint8_t fault = 0;
+            uint8_t textMessage = 0;
+            uint8_t focusedModule = 0;
+            uint8_t log = 0;
+            uint8_t settings = 0;
+            uint8_t wifi = 0;
+        } positions;
+
+        uint8_t frameCount = 0;
+    } framesetInfo;
+
+    // Which frame we want to be displayed, after we regen the frameset by calling setFrames
+    enum FrameFocus : uint8_t {
+        FOCUS_DEFAULT,  // No specific frame
+        FOCUS_PRESERVE, // Return to the previous frame
+        FOCUS_FAULT,
+        FOCUS_TEXTMESSAGE,
+        FOCUS_MODULE, // Note: target module should call requestFocus(), otherwise no info about which module to focus
+    };
+
+    // Regenerate the normal set of frames, focusing a specific frame if requested
+    // Call when a frame should be added / removed, or custom frames should be cleared
+    void setFrames(FrameFocus focus = FOCUS_DEFAULT);
 
     /// Try to start drawing ASAP
     void setFastFramerate();

src/graphics/ScreenFonts.h

@@ -1,5 +1,9 @@
 #pragma once
 
+#ifdef OLED_PL
+#include "graphics/fonts/OLEDDisplayFontsPL.h"
+#endif
+
 #ifdef OLED_RU
 #include "graphics/fonts/OLEDDisplayFontsRU.h"
 #endif
@@ -8,13 +12,17 @@
 #include "graphics/fonts/OLEDDisplayFontsUA.h"
 #endif
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS)) &&          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) ||          \
+     defined(HX8357_CS)) &&                                                                                                      \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 // The screen is bigger so use bigger fonts
 #define FONT_SMALL ArialMT_Plain_16  // Height: 19
 #define FONT_MEDIUM ArialMT_Plain_24 // Height: 28
 #define FONT_LARGE ArialMT_Plain_24  // Height: 28
 #else
+#ifdef OLED_PL
+#define FONT_SMALL ArialMT_Plain_10_PL
+#else
 #ifdef OLED_RU
 #define FONT_SMALL ArialMT_Plain_10_RU
 #else
@@ -24,6 +32,7 @@
 #define FONT_SMALL ArialMT_Plain_10 // Height: 13
 #endif
 #endif
+#endif
 #define FONT_MEDIUM ArialMT_Plain_16 // Height: 19
 #define FONT_LARGE ArialMT_Plain_24  // Height: 28
 #endif

src/graphics/fonts/OLEDDisplayFontsPL.cpp

@@ -0,0 +1,440 @@
+#include "OLEDDisplayFontsPL.h"
+
+// Font generated or edited with the glyphEditor
+const uint8_t ArialMT_Plain_10_PL[] PROGMEM = {
+    0x0A, // Width: 10
+    0x0D, // Height: 13
+    0x20, // First char: 32
+    0xE0, // Number of chars: 224
+
+    // Jump Table:
+    0xFF, 0xFF, 0x00, 0x03, // 32:65535
+    0x00, 0x00, 0x04, 0x03, // 33
+    0x00, 0x04, 0x05, 0x04, // 34
+    0x00, 0x09, 0x09, 0x06, // 35
+    0x00, 0x12, 0x0A, 0x06, // 36
+    0x00, 0x1C, 0x10, 0x09, // 37
+    0x00, 0x2C, 0x0E, 0x08, // 38
+    0x00, 0x3A, 0x01, 0x02, // 39
+    0x00, 0x3B, 0x06, 0x04, // 40
+    0x00, 0x41, 0x06, 0x04, // 41
+    0x00, 0x47, 0x05, 0x04, // 42
+    0x00, 0x4C, 0x09, 0x06, // 43
+    0x00, 0x55, 0x04, 0x03, // 44
+    0x00, 0x59, 0x03, 0x03, // 45
+    0x00, 0x5C, 0x04, 0x03, // 46
+    0x00, 0x60, 0x05, 0x04, // 47
+    0x00, 0x65, 0x0A, 0x06, // 48
+    0x00, 0x6F, 0x08, 0x05, // 49
+    0x00, 0x77, 0x0A, 0x06, // 50
+    0x00, 0x81, 0x0A, 0x06, // 51
+    0x00, 0x8B, 0x0B, 0x07, // 52
+    0x00, 0x96, 0x0A, 0x06, // 53
+    0x00, 0xA0, 0x0A, 0x06, // 54
+    0x00, 0xAA, 0x09, 0x06, // 55
+    0x00, 0xB3, 0x0A, 0x06, // 56
+    0x00, 0xBD, 0x0A, 0x06, // 57
+    0x00, 0xC7, 0x04, 0x03, // 58
+    0x00, 0xCB, 0x04, 0x03, // 59
+    0x00, 0xCF, 0x0A, 0x06, // 60
+    0x00, 0xD9, 0x09, 0x06, // 61
+    0x00, 0xE2, 0x09, 0x06, // 62
+    0x00, 0xEB, 0x0B, 0x07, // 63
+    0x00, 0xF6, 0x14, 0x0B, // 64
+    0x01, 0x0A, 0x0E, 0x08, // 65
+    0x01, 0x18, 0x0C, 0x07, // 66
+    0x01, 0x24, 0x0C, 0x07, // 67
+    0x01, 0x30, 0x0B, 0x07, // 68
+    0x01, 0x3B, 0x0C, 0x07, // 69
+    0x01, 0x47, 0x09, 0x06, // 70
+    0x01, 0x50, 0x0D, 0x08, // 71
+    0x01, 0x5D, 0x0C, 0x07, // 72
+    0x01, 0x69, 0x04, 0x03, // 73
+    0x01, 0x6D, 0x08, 0x05, // 74
+    0x01, 0x75, 0x0E, 0x08, // 75
+    0x01, 0x83, 0x0C, 0x07, // 76
+    0x01, 0x8F, 0x10, 0x09, // 77
+    0x01, 0x9F, 0x0C, 0x07, // 78
+    0x01, 0xAB, 0x0E, 0x08, // 79
+    0x01, 0xB9, 0x0B, 0x07, // 80
+    0x01, 0xC4, 0x0E, 0x08, // 81
+    0x01, 0xD2, 0x0C, 0x07, // 82
+    0x01, 0xDE, 0x0C, 0x07, // 83
+    0x01, 0xEA, 0x0B, 0x07, // 84
+    0x01, 0xF5, 0x0C, 0x07, // 85
+    0x02, 0x01, 0x0D, 0x08, // 86
+    0x02, 0x0E, 0x11, 0x0A, // 87
+    0x02, 0x1F, 0x0E, 0x08, // 88
+    0x02, 0x2D, 0x0D, 0x08, // 89
+    0x02, 0x3A, 0x0C, 0x07, // 90
+    0x02, 0x46, 0x06, 0x04, // 91
+    0x02, 0x4C, 0x06, 0x04, // 92
+    0x02, 0x52, 0x04, 0x03, // 93
+    0x02, 0x56, 0x09, 0x06, // 94
+    0x02, 0x5F, 0x0C, 0x07, // 95
+    0x02, 0x6B, 0x03, 0x03, // 96
+    0x02, 0x6E, 0x0A, 0x06, // 97
+    0x02, 0x78, 0x0A, 0x06, // 98
+    0x02, 0x82, 0x0A, 0x06, // 99
+    0x02, 0x8C, 0x0A, 0x06, // 100
+    0x02, 0x96, 0x0A, 0x06, // 101
+    0x02, 0xA0, 0x05, 0x04, // 102
+    0x02, 0xA5, 0x0A, 0x06, // 103
+    0x02, 0xAF, 0x0A, 0x06, // 104
+    0x02, 0xB9, 0x04, 0x03, // 105
+    0x02, 0xBD, 0x04, 0x03, // 106
+    0x02, 0xC1, 0x08, 0x05, // 107
+    0x02, 0xC9, 0x04, 0x03, // 108
+    0x02, 0xCD, 0x10, 0x09, // 109
+    0x02, 0xDD, 0x0A, 0x06, // 110
+    0x02, 0xE7, 0x0A, 0x06, // 111
+    0x02, 0xF1, 0x0A, 0x06, // 112
+    0x02, 0xFB, 0x0A, 0x06, // 113
+    0x03, 0x05, 0x05, 0x04, // 114
+    0x03, 0x0A, 0x08, 0x05, // 115
+    0x03, 0x12, 0x06, 0x04, // 116
+    0x03, 0x18, 0x0A, 0x06, // 117
+    0x03, 0x22, 0x09, 0x06, // 118
+    0x03, 0x2B, 0x0E, 0x08, // 119
+    0x03, 0x39, 0x0A, 0x06, // 120
+    0x03, 0x43, 0x09, 0x06, // 121
+    0x03, 0x4C, 0x0A, 0x06, // 122
+    0x03, 0x56, 0x06, 0x04, // 123
+    0x03, 0x5C, 0x04, 0x03, // 124
+    0x03, 0x60, 0x05, 0x04, // 125
+    0x03, 0x65, 0x09, 0x06, // 126
+    0xFF, 0xFF, 0x00, 0x0A, // 127
+    0xFF, 0xFF, 0x00, 0x0A, // 128
+    0x03, 0x6E, 0x0C, 0x07, // 129
+    0x03, 0x7A, 0x05, 0x04, // 130
+    0x03, 0x7F, 0x0C, 0x07, // 131
+    0x03, 0x8B, 0x0E, 0x08, // 132
+    0x03, 0x99, 0x0C, 0x07, // 133
+    0x03, 0xA5, 0x0C, 0x07, // 134
+    0x03, 0xB1, 0x0A, 0x06, // 135
+    0x03, 0xBB, 0x0A, 0x06, // 136
+    0x03, 0xC5, 0x0A, 0x06, // 137
+    0xFF, 0xFF, 0x00, 0x0A, // 138
+    0xFF, 0xFF, 0x00, 0x0A, // 139
+    0xFF, 0xFF, 0x00, 0x0A, // 140
+    0xFF, 0xFF, 0x00, 0x0A, // 141
+    0xFF, 0xFF, 0x00, 0x0A, // 142
+    0xFF, 0xFF, 0x00, 0x0A, // 143
+    0xFF, 0xFF, 0x00, 0x0A, // 144
+    0xFF, 0xFF, 0x00, 0x0A, // 145
+    0xFF, 0xFF, 0x00, 0x0A, // 146
+    0x03, 0xCF, 0x0E, 0x08, // 147
+    0x03, 0xDD, 0x0A, 0x06, // 148
+    0xFF, 0xFF, 0x00, 0x0A, // 149
+    0xFF, 0xFF, 0x00, 0x0A, // 150
+    0xFF, 0xFF, 0x00, 0x0A, // 151
+    0x03, 0xE7, 0x0C, 0x07, // 152
+    0x03, 0xF3, 0x0C, 0x07, // 153
+    0x03, 0xFF, 0x0C, 0x07, // 154
+    0x04, 0x0B, 0x08, 0x05, // 155
+    0xFF, 0xFF, 0x00, 0x0A, // 156
+    0xFF, 0xFF, 0x00, 0x0A, // 157
+    0xFF, 0xFF, 0x00, 0x0A, // 158
+    0xFF, 0xFF, 0x00, 0x0A, // 159
+    0xFF, 0xFF, 0x00, 0x0A, // 160
+    0x04, 0x13, 0x04, 0x03, // 161
+    0x04, 0x17, 0x0A, 0x06, // 162
+    0x04, 0x21, 0x0C, 0x07, // 163
+    0x04, 0x2D, 0x0A, 0x06, // 164
+    0x04, 0x37, 0x0A, 0x06, // 165
+    0x04, 0x41, 0x04, 0x03, // 166
+    0x04, 0x45, 0x0A, 0x06, // 167
+    0x04, 0x4F, 0x05, 0x04, // 168
+    0x04, 0x54, 0x0D, 0x08, // 169
+    0x04, 0x61, 0x07, 0x05, // 170
+    0x04, 0x68, 0x0A, 0x06, // 171
+    0x04, 0x72, 0x09, 0x06, // 172
+    0x04, 0x7B, 0x03, 0x03, // 173
+    0x04, 0x7E, 0x0D, 0x08, // 174
+    0x04, 0x8B, 0x0B, 0x07, // 175
+    0x04, 0x96, 0x07, 0x05, // 176
+    0x04, 0x9D, 0x0A, 0x06, // 177
+    0x04, 0xA7, 0x05, 0x04, // 178
+    0x04, 0xAC, 0x05, 0x04, // 179
+    0x04, 0xB1, 0x05, 0x04, // 180
+    0x04, 0xB6, 0x0A, 0x06, // 181
+    0x04, 0xC0, 0x09, 0x06, // 182
+    0x04, 0xC9, 0x03, 0x03, // 183
+    0x04, 0xCC, 0x06, 0x04, // 184
+    0x04, 0xD2, 0x0C, 0x07, // 185
+    0x04, 0xDE, 0x07, 0x05, // 186
+    0x04, 0xE5, 0x0C, 0x07, // 187
+    0x04, 0xF1, 0x0A, 0x06, // 188
+    0x04, 0xFB, 0x10, 0x09, // 189
+    0x05, 0x0B, 0x10, 0x09, // 190
+    0x05, 0x1B, 0x0A, 0x06, // 191
+    0x05, 0x25, 0x0E, 0x08, // 192
+    0x05, 0x33, 0x0E, 0x08, // 193
+    0x05, 0x41, 0x0E, 0x08, // 194
+    0x05, 0x4F, 0x0E, 0x08, // 195
+    0x05, 0x5D, 0x0E, 0x08, // 196
+    0x05, 0x6B, 0x0E, 0x08, // 197
+    0x05, 0x79, 0x12, 0x0A, // 198
+    0x05, 0x8B, 0x0C, 0x07, // 199
+    0x05, 0x97, 0x0C, 0x07, // 200
+    0x05, 0xA3, 0x0C, 0x07, // 201
+    0x05, 0xAF, 0x0C, 0x07, // 202
+    0x05, 0xBB, 0x0C, 0x07, // 203
+    0x05, 0xC7, 0x05, 0x04, // 204
+    0x05, 0xCC, 0x04, 0x03, // 205
+    0x05, 0xD0, 0x04, 0x03, // 206
+    0x05, 0xD4, 0x05, 0x04, // 207
+    0x05, 0xD9, 0x0B, 0x07, // 208
+    0x05, 0xE4, 0x0C, 0x07, // 209
+    0x05, 0xF0, 0x0E, 0x08, // 210
+    0x05, 0xFE, 0x0E, 0x08, // 211
+    0x06, 0x0C, 0x0E, 0x08, // 212
+    0x06, 0x1A, 0x0E, 0x08, // 213
+    0x06, 0x28, 0x0E, 0x08, // 214
+    0x06, 0x36, 0x0A, 0x06, // 215
+    0x06, 0x40, 0x0D, 0x08, // 216
+    0x06, 0x4D, 0x0C, 0x07, // 217
+    0x06, 0x59, 0x0C, 0x07, // 218
+    0x06, 0x65, 0x0C, 0x07, // 219
+    0x06, 0x71, 0x0C, 0x07, // 220
+    0x06, 0x7D, 0x0D, 0x08, // 221
+    0x06, 0x8A, 0x0B, 0x07, // 222
+    0x06, 0x95, 0x0C, 0x07, // 223
+    0x06, 0xA1, 0x0A, 0x06, // 224
+    0x06, 0xAB, 0x0A, 0x06, // 225
+    0x06, 0xB5, 0x0A, 0x06, // 226
+    0x06, 0xBF, 0x0A, 0x06, // 227
+    0x06, 0xC9, 0x0A, 0x06, // 228
+    0x06, 0xD3, 0x0A, 0x06, // 229
+    0x06, 0xDD, 0x10, 0x09, // 230
+    0x06, 0xED, 0x0A, 0x06, // 231
+    0x06, 0xF7, 0x0A, 0x06, // 232
+    0x07, 0x01, 0x0A, 0x06, // 233
+    0x07, 0x0B, 0x0A, 0x06, // 234
+    0x07, 0x15, 0x0A, 0x06, // 235
+    0x07, 0x1F, 0x05, 0x04, // 236
+    0x07, 0x24, 0x04, 0x03, // 237
+    0x07, 0x28, 0x05, 0x04, // 238
+    0x07, 0x2D, 0x05, 0x04, // 239
+    0x07, 0x32, 0x0A, 0x06, // 240
+    0x07, 0x3C, 0x0A, 0x06, // 241
+    0x07, 0x46, 0x0A, 0x06, // 242
+    0x07, 0x50, 0x0A, 0x06, // 243
+    0x07, 0x5A, 0x0A, 0x06, // 244
+    0x07, 0x64, 0x0A, 0x06, // 245
+    0x07, 0x6E, 0x0A, 0x06, // 246
+    0x07, 0x78, 0x09, 0x06, // 247
+    0x07, 0x81, 0x0A, 0x06, // 248
+    0x07, 0x8B, 0x0A, 0x06, // 249
+    0x07, 0x95, 0x0A, 0x06, // 250
+    0x07, 0x9F, 0x0A, 0x06, // 251
+    0x07, 0xA9, 0x0A, 0x06, // 252
+    0x07, 0xB3, 0x09, 0x06, // 253
+    0x07, 0xBC, 0x0A, 0x06, // 254
+    0x07, 0xC6, 0x09, 0x06, // 255
+    // Font Data:
+    0x00, 0x00, 0xF8, 0x02,                                                                                                 // 33
+    0x38, 0x00, 0x00, 0x00, 0x38,                                                                                           // 34
+    0xA0, 0x03, 0xE0, 0x00, 0xB8, 0x03, 0xE0, 0x00, 0xB8,                                                                   // 35
+    0x30, 0x01, 0x28, 0x02, 0xF8, 0x07, 0x48, 0x02, 0x90, 0x01,                                                             // 36
+    0x00, 0x00, 0x30, 0x00, 0x48, 0x00, 0x30, 0x03, 0xC0, 0x00, 0xB0, 0x01, 0x48, 0x02, 0x80, 0x01,                         // 37
+    0x80, 0x01, 0x50, 0x02, 0x68, 0x02, 0xA8, 0x02, 0x18, 0x01, 0x80, 0x03, 0x80, 0x02,                                     // 38
+    0x38,                                                                                                                   // 39
+    0xE0, 0x03, 0x10, 0x04, 0x08, 0x08,                                                                                     // 40
+    0x08, 0x08, 0x10, 0x04, 0xE0, 0x03,                                                                                     // 41
+    0x28, 0x00, 0x18, 0x00, 0x28,                                                                                           // 42
+    0x40, 0x00, 0x40, 0x00, 0xF0, 0x01, 0x40, 0x00, 0x40,                                                                   // 43
+    0x00, 0x00, 0x00, 0x06,                                                                                                 // 44
+    0x80, 0x00, 0x80,                                                                                                       // 45
+    0x00, 0x00, 0x00, 0x02,                                                                                                 // 46
+    0x00, 0x03, 0xE0, 0x00, 0x18,                                                                                           // 47
+    0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                                             // 48
+    0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0xF8, 0x03,                                                                         // 49
+    0x10, 0x02, 0x08, 0x03, 0x88, 0x02, 0x48, 0x02, 0x30, 0x02,                                                             // 50
+    0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                             // 51
+    0xC0, 0x00, 0xA0, 0x00, 0x90, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x80,                                                       // 52
+    0x60, 0x01, 0x38, 0x02, 0x28, 0x02, 0x28, 0x02, 0xC8, 0x01,                                                             // 53
+    0xF0, 0x01, 0x28, 0x02, 0x28, 0x02, 0x28, 0x02, 0xD0, 0x01,                                                             // 54
+    0x08, 0x00, 0x08, 0x03, 0xC8, 0x00, 0x38, 0x00, 0x08,                                                                   // 55
+    0xB0, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01,                                                             // 56
+    0x70, 0x01, 0x88, 0x02, 0x88, 0x02, 0x88, 0x02, 0xF0, 0x01,                                                             // 57
+    0x00, 0x00, 0x20, 0x02,                                                                                                 // 58
+    0x00, 0x00, 0x20, 0x06,                                                                                                 // 59
+    0x00, 0x00, 0x40, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x10, 0x01,                                                             // 60
+    0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0,                                                                   // 61
+    0x00, 0x00, 0x10, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0x40,                                                                   // 62
+    0x10, 0x00, 0x08, 0x00, 0x08, 0x00, 0xC8, 0x02, 0x48, 0x00, 0x30,                                                       // 63
+    0x00, 0x00, 0xC0, 0x03, 0x30, 0x04, 0xD0, 0x09, 0x28, 0x0A, 0x28, 0x0A, 0xC8, 0x0B, 0x68, 0x0A, 0x10, 0x05, 0xE0, 0x04, // 64
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 65
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01,                                                 // 66
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01,                                                 // 67
+    0x00, 0x00, 0xF8, 0x03, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, 0xE0,                                                       // 68
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 69
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x08,                                                                   // 70
+    0x00, 0x00, 0xE0, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x50, 0x01, 0xC0,                                           // 71
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03,                                                 // 72
+    0x00, 0x00, 0xF8, 0x03,                                                                                                 // 73
+    0x00, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                                         // 74
+    0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                                     // 75
+    0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02,                                                 // 76
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x30, 0x00, 0xF8, 0x03,                         // 77
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x40, 0x00, 0x80, 0x01, 0xF8, 0x03,                                                 // 78
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 79
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                                                       // 80
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x03, 0x08, 0x03, 0xF0, 0x02,                                     // 81
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0xC8, 0x00, 0x30, 0x03,                                                 // 82
+    0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x90, 0x01,                                                 // 83
+    0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08,                                                       // 84
+    0x00, 0x00, 0xF8, 0x01, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 85
+    0x08, 0x00, 0x70, 0x00, 0x80, 0x01, 0x00, 0x02, 0x80, 0x01, 0x70, 0x00, 0x08,                                           // 86
+    0x18, 0x00, 0xE0, 0x01, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0xF0, 0x01, 0x00, 0x02, 0xE0, 0x01, 0x18,                   // 87
+    0x00, 0x02, 0x08, 0x01, 0x90, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02,                                     // 88
+    0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC0, 0x03, 0x20, 0x00, 0x10, 0x00, 0x08,                                           // 89
+    0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x68, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 90
+    0x00, 0x00, 0xF8, 0x0F, 0x08, 0x08,                                                                                     // 91
+    0x18, 0x00, 0xE0, 0x00, 0x00, 0x03,                                                                                     // 92
+    0x08, 0x08, 0xF8, 0x0F,                                                                                                 // 93
+    0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x30, 0x00, 0x40,                                                                   // 94
+    0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08,                                                 // 95
+    0x08, 0x00, 0x10,                                                                                                       // 96
+    0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x03,                                                             // 97
+    0x00, 0x00, 0xF8, 0x03, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 98
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x40, 0x01,                                                             // 99
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xF8, 0x03,                                                             // 100
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02,                                                             // 101
+    0x20, 0x00, 0xF0, 0x03, 0x28,                                                                                           // 102
+    0x00, 0x00, 0xC0, 0x05, 0x20, 0x0A, 0x20, 0x0A, 0xE0, 0x07,                                                             // 103
+    0x00, 0x00, 0xF8, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                                             // 104
+    0x00, 0x00, 0xE8, 0x03,                                                                                                 // 105
+    0x00, 0x08, 0xE8, 0x07,                                                                                                 // 106
+    0xF8, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02,                                                                         // 107
+    0x00, 0x00, 0xF8, 0x03,                                                                                                 // 108
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                         // 109
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03,                                                             // 110
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 111
+    0x00, 0x00, 0xE0, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 112
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xE0, 0x0F,                                                             // 113
+    0x00, 0x00, 0xE0, 0x03, 0x20,                                                                                           // 114
+    0x40, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x20, 0x01,                                                                         // 115
+    0x20, 0x00, 0xF8, 0x03, 0x20, 0x02,                                                                                     // 116
+    0x00, 0x00, 0xE0, 0x01, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,                                                             // 117
+    0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20,                                                                   // 118
+    0xE0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xE0, 0x01,                                     // 119
+    0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02,                                                             // 120
+    0x20, 0x00, 0xC0, 0x09, 0x00, 0x06, 0xC0, 0x01, 0x20,                                                                   // 121
+    0x20, 0x02, 0x20, 0x03, 0xA0, 0x02, 0x60, 0x02, 0x20, 0x02,                                                             // 122
+    0x80, 0x00, 0x78, 0x0F, 0x08, 0x08,                                                                                     // 123
+    0x00, 0x00, 0xF8, 0x0F,                                                                                                 // 124
+    0x08, 0x08, 0x78, 0x0F, 0x80,                                                                                           // 125
+    0xC0, 0x00, 0x40, 0x00, 0xC0, 0x00, 0x80, 0x00, 0xC0,                                                                   // 126
+    0x00, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x20, 0x02, 0x00, 0x02, 0x00, 0x02,                                                 // 129
+    0x40, 0x00, 0xF8, 0x03, 0x20,                                                                                           // 130
+    0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x44, 0x00, 0x82, 0x01, 0xF8, 0x03,                                                 // 131
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x05, 0x00, 0x0A,                                     // 132
+    0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x07, 0x00, 0x08,                                                 // 133
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x10, 0x01,                                                 // 134
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x28, 0x02, 0x44, 0x01,                                                             // 135
+    0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x28, 0x00, 0xC4, 0x03,                                                             // 136
+    0x20, 0x02, 0x20, 0x03, 0xA8, 0x02, 0x64, 0x02, 0x20, 0x02,                                                             // 137
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0xF0, 0x01,                                     // 147
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x28, 0x02, 0xC4, 0x01,                                                             // 148
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x06, 0x48, 0x0A,                                                 // 152
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x06, 0x00, 0x08,                                                 // 153
+    0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x4A, 0x02, 0x49, 0x02, 0x90, 0x01,                                                 // 154
+    0x40, 0x02, 0xA0, 0x02, 0xA8, 0x02, 0x24, 0x01,                                                                         // 155
+    0x00, 0x00, 0xA0, 0x0F,                                                                                                 // 161
+    0x00, 0x00, 0xC0, 0x01, 0xA0, 0x0F, 0x78, 0x02, 0x40, 0x01,                                                             // 162
+    0x40, 0x02, 0x70, 0x03, 0xC8, 0x02, 0x48, 0x02, 0x08, 0x02, 0x10, 0x02,                                                 // 163
+    0x00, 0x00, 0xE0, 0x01, 0x20, 0x01, 0x20, 0x01, 0xE0, 0x01,                                                             // 164
+    0x48, 0x01, 0x70, 0x01, 0xC0, 0x03, 0x70, 0x01, 0x48, 0x01,                                                             // 165
+    0x00, 0x00, 0x38, 0x0F,                                                                                                 // 166
+    0xD0, 0x04, 0x28, 0x09, 0x48, 0x09, 0x48, 0x0A, 0x90, 0x05,                                                             // 167
+    0x08, 0x00, 0x00, 0x00, 0x08,                                                                                           // 168
+    0xE0, 0x00, 0x10, 0x01, 0x48, 0x02, 0xA8, 0x02, 0xA8, 0x02, 0x10, 0x01, 0xE0,                                           // 169
+    0x68, 0x00, 0x68, 0x00, 0x68, 0x00, 0x78,                                                                               // 170
+    0x00, 0x00, 0x80, 0x01, 0x40, 0x02, 0x80, 0x01, 0x40, 0x02,                                                             // 171
+    0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0,                                                                   // 172
+    0x80, 0x00, 0x80,                                                                                                       // 173
+    0xE0, 0x00, 0x10, 0x01, 0xE8, 0x02, 0x68, 0x02, 0xC8, 0x02, 0x10, 0x01, 0xE0,                                           // 174
+    0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02,                                                       // 175
+    0x00, 0x00, 0x38, 0x00, 0x28, 0x00, 0x38,                                                                               // 176
+    0x40, 0x02, 0x40, 0x02, 0xF0, 0x03, 0x40, 0x02, 0x40, 0x02,                                                             // 177
+    0x48, 0x00, 0x68, 0x00, 0x58,                                                                                           // 178
+    0x48, 0x00, 0x58, 0x00, 0x68,                                                                                           // 179
+    0x00, 0x00, 0x10, 0x00, 0x08,                                                                                           // 180
+    0x00, 0x00, 0xE0, 0x0F, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03,                                                             // 181
+    0x70, 0x00, 0xF8, 0x0F, 0x08, 0x00, 0xF8, 0x0F, 0x08,                                                                   // 182
+    0x00, 0x00, 0x40,                                                                                                       // 183
+    0x00, 0x00, 0x00, 0x14, 0x00, 0x18,                                                                                     // 184
+    0x08, 0x03, 0x88, 0x02, 0xCA, 0x02, 0x69, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 185
+    0x30, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30,                                                                               // 186
+    0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x6A, 0x02, 0x38, 0x02, 0x18, 0x02,                                                 // 187
+    0x20, 0x02, 0x20, 0x03, 0xA8, 0x02, 0x60, 0x02, 0x20, 0x02,                                                             // 188
+    0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0x80, 0x00, 0x60, 0x00, 0x50, 0x02, 0x48, 0x03, 0xC0, 0x02,                         // 189
+    0x48, 0x00, 0x58, 0x00, 0x68, 0x03, 0x80, 0x00, 0x60, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01,                         // 190
+    0x00, 0x00, 0x00, 0x06, 0x00, 0x09, 0xA0, 0x09, 0x00, 0x04,                                                             // 191
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x89, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 192
+    0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x8A, 0x00, 0xB1, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 193
+    0x00, 0x02, 0xC0, 0x01, 0xB2, 0x00, 0x89, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 194
+    0x00, 0x02, 0xC2, 0x01, 0xB1, 0x00, 0x8A, 0x00, 0xB1, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 195
+    0x00, 0x02, 0xC0, 0x01, 0xB2, 0x00, 0x88, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 196
+    0x00, 0x02, 0xC0, 0x01, 0xBE, 0x00, 0x8A, 0x00, 0xBE, 0x00, 0xC0, 0x01, 0x00, 0x02,                                     // 197
+    0x00, 0x03, 0xC0, 0x00, 0xE0, 0x00, 0x98, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02,             // 198
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x16, 0x08, 0x1A, 0x10, 0x01,                                                 // 199
+    0x00, 0x00, 0xF8, 0x03, 0x49, 0x02, 0x4A, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 200
+    0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x4A, 0x02, 0x49, 0x02, 0x48, 0x02,                                                 // 201
+    0x00, 0x00, 0xFA, 0x03, 0x49, 0x02, 0x4A, 0x02, 0x48, 0x02, 0x48, 0x02,                                                 // 202
+    0x00, 0x00, 0xF8, 0x03, 0x4A, 0x02, 0x48, 0x02, 0x4A, 0x02, 0x48, 0x02,                                                 // 203
+    0x00, 0x00, 0xF9, 0x03, 0x02,                                                                                           // 204
+    0x02, 0x00, 0xF9, 0x03,                                                                                                 // 205
+    0x01, 0x00, 0xFA, 0x03,                                                                                                 // 206
+    0x02, 0x00, 0xF8, 0x03, 0x02,                                                                                           // 207
+    0x40, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x10, 0x01, 0xE0,                                                       // 208
+    0x00, 0x00, 0xFA, 0x03, 0x31, 0x00, 0x42, 0x00, 0x81, 0x01, 0xF8, 0x03,                                                 // 209
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x09, 0x02, 0x0A, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 210
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 211
+    0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x0A, 0x02, 0xF0, 0x01,                                     // 212
+    0x00, 0x00, 0xF0, 0x01, 0x0A, 0x02, 0x09, 0x02, 0x0A, 0x02, 0x09, 0x02, 0xF0, 0x01,                                     // 213
+    0x00, 0x00, 0xF0, 0x01, 0x0A, 0x02, 0x08, 0x02, 0x0A, 0x02, 0x08, 0x02, 0xF0, 0x01,                                     // 214
+    0x10, 0x01, 0xA0, 0x00, 0xE0, 0x00, 0xA0, 0x00, 0x10, 0x01,                                                             // 215
+    0x00, 0x00, 0xF0, 0x02, 0x08, 0x03, 0xC8, 0x02, 0x28, 0x02, 0x18, 0x03, 0xE8,                                           // 216
+    0x00, 0x00, 0xF8, 0x01, 0x01, 0x02, 0x02, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 217
+    0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x01, 0x02, 0x00, 0x02, 0xF8, 0x01,                                                 // 218
+    0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x01, 0x02, 0x02, 0x02, 0xF8, 0x01,                                                 // 219
+    0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x00, 0x02, 0x02, 0x02, 0xF8, 0x01,                                                 // 220
+    0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC2, 0x03, 0x21, 0x00, 0x10, 0x00, 0x08,                                           // 221
+    0x00, 0x00, 0xF8, 0x03, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xE0,                                                       // 222
+    0x00, 0x00, 0xF0, 0x03, 0x08, 0x01, 0x48, 0x02, 0xB0, 0x02, 0x80, 0x01,                                                 // 223
+    0x00, 0x00, 0x00, 0x03, 0xA4, 0x02, 0xA8, 0x02, 0xE0, 0x03,                                                             // 224
+    0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA4, 0x02, 0xE0, 0x03,                                                             // 225
+    0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA4, 0x02, 0xE8, 0x03,                                                             // 226
+    0x00, 0x00, 0x08, 0x03, 0xA4, 0x02, 0xA8, 0x02, 0xE4, 0x03,                                                             // 227
+    0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA0, 0x02, 0xE8, 0x03,                                                             // 228
+    0x00, 0x00, 0x00, 0x03, 0xAE, 0x02, 0xAA, 0x02, 0xEE, 0x03,                                                             // 229
+    0x00, 0x00, 0x40, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02,                         // 230
+    0x00, 0x00, 0xC0, 0x01, 0x20, 0x16, 0x20, 0x1A, 0x40, 0x01,                                                             // 231
+    0x00, 0x00, 0xC0, 0x01, 0xA4, 0x02, 0xA8, 0x02, 0xC0, 0x02,                                                             // 232
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA4, 0x02, 0xC0, 0x02,                                                             // 233
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA4, 0x02, 0xC8, 0x02,                                                             // 234
+    0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA0, 0x02, 0xC8, 0x02,                                                             // 235
+    0x00, 0x00, 0xE4, 0x03, 0x08,                                                                                           // 236
+    0x08, 0x00, 0xE4, 0x03,                                                                                                 // 237
+    0x08, 0x00, 0xE4, 0x03, 0x08,                                                                                           // 238
+    0x08, 0x00, 0xE0, 0x03, 0x08,                                                                                           // 239
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x38, 0x02, 0xE0, 0x01,                                                             // 240
+    0x00, 0x00, 0xE8, 0x03, 0x24, 0x00, 0x28, 0x00, 0xC4, 0x03,                                                             // 241
+    0x00, 0x00, 0xC0, 0x01, 0x24, 0x02, 0x28, 0x02, 0xC0, 0x01,                                                             // 242
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x24, 0x02, 0xC0, 0x01,                                                             // 243
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x24, 0x02, 0xC8, 0x01,                                                             // 244
+    0x00, 0x00, 0xC8, 0x01, 0x24, 0x02, 0x28, 0x02, 0xC4, 0x01,                                                             // 245
+    0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x20, 0x02, 0xC8, 0x01,                                                             // 246
+    0x40, 0x00, 0x40, 0x00, 0x50, 0x01, 0x40, 0x00, 0x40,                                                                   // 247
+    0x00, 0x00, 0xC0, 0x02, 0xA0, 0x03, 0x60, 0x02, 0xA0, 0x01,                                                             // 248
+    0x00, 0x00, 0xE0, 0x01, 0x04, 0x02, 0x08, 0x02, 0xE0, 0x03,                                                             // 249
+    0x00, 0x00, 0xE0, 0x01, 0x08, 0x02, 0x04, 0x02, 0xE0, 0x03,                                                             // 250
+    0x00, 0x00, 0xE8, 0x01, 0x04, 0x02, 0x08, 0x02, 0xE0, 0x03,                                                             // 251
+    0x00, 0x00, 0xE0, 0x01, 0x08, 0x02, 0x00, 0x02, 0xE8, 0x03,                                                             // 252
+    0x20, 0x00, 0xC0, 0x09, 0x08, 0x06, 0xC4, 0x01, 0x20,                                                                   // 253
+    0x00, 0x00, 0xF8, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01,                                                             // 254
+    0x20, 0x00, 0xC8, 0x09, 0x00, 0x06, 0xC8, 0x01, 0x20,                                                                   // 255
+};

src/graphics/fonts/OLEDDisplayFontsPL.h

@@ -0,0 +1,11 @@
+#ifndef OLEDDISPLAYFONTSPL_h
+#define OLEDDISPLAYFONTSPL_h
+
+#ifdef ARDUINO
+#include <Arduino.h>
+#elif __MBED__
+#define PROGMEM
+#endif
+
+extern const uint8_t ArialMT_Plain_10_PL[] PROGMEM;
+#endif

src/graphics/images.h

@@ -20,8 +20,8 @@ const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03
                                                     0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f};
 #endif
 
-#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(HX8357_CS) ||           \
-     ARCH_PORTDUINO) &&                                                                                                          \
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ST7735_CS) || defined(ST7789_CS) || defined(USE_ST7789) ||          \
+     defined(HX8357_CS) || ARCH_PORTDUINO) &&                                                                                    \
     !defined(DISPLAY_FORCE_SMALL_FONTS)
 const uint8_t imgQuestionL1[] PROGMEM = {0xff, 0x01, 0x01, 0x32, 0x7b, 0x49, 0x49, 0x6f, 0x26, 0x01, 0x01, 0xff};
 const uint8_t imgQuestionL2[] PROGMEM = {0x0f, 0x08, 0x08, 0x08, 0x06, 0x0f, 0x0f, 0x06, 0x08, 0x08, 0x08, 0x0f};

src/graphics/img/icon.xbm

@@ -1,3 +1,4 @@
+#ifndef HAS_USERPREFS_SPLASH
 #define icon_width 50
 #define icon_height 28
 static uint8_t icon_bits[] = {
@@ -17,4 +18,5 @@ static uint8_t icon_bits[] = {
   0xFE, 0x00, 0x00, 0xFC, 0x01, 0x7E, 0x00, 0x7F, 0x00, 0x00, 0xF8, 0x01, 
   0x7E, 0x00, 0x3E, 0x00, 0x00, 0xF8, 0x01, 0x38, 0x00, 0x3C, 0x00, 0x00, 
   0x70, 0x00, 0x10, 0x00, 0x10, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 
-  0x00, 0x00, 0x00, 0x00, };
+  0x00, 0x00, 0x00, 0x00, };
+#endif

src/input/ExpressLRSFiveWay.cpp

@@ -0,0 +1,260 @@
+
+#include "ExpressLRSFiveWay.h"
+
+#ifdef INPUTBROKER_EXPRESSLRSFIVEWAY_TYPE
+
+static const char inputSourceName[] = "ExpressLRS5Way"; // should match "allow input source" string
+
+/**
+ * @brief Calculate fuzz: half the distance to the next nearest neighbor for each joystick position.
+ *
+ * The goal is to avoid collisions between joystick positions while still maintaining
+ * the widest tolerance for the analog value.
+ *
+ * Example: {10,50,800,1000,300,1600}
+ * If we just choose the minimum difference for this array the value would
+ * be 40/2 = 20.
+ *
+ * 20 does not leave enough room for the joystick position using 1600 which
+ * could have a +-100 offset.
+ *
+ * Example Fuzz values: {20, 20, 100, 100, 125, 300} now the fuzz for the 1600
+ * position is 300 instead of 20
+ */
+void ExpressLRSFiveWay::calcFuzzValues()
+{
+    for (unsigned int i = 0; i < N_JOY_ADC_VALUES; i++) {
+        uint16_t closestDist = 0xffff;
+        uint16_t ival = joyAdcValues[i];
+        // Find the closest value to ival
+        for (unsigned int j = 0; j < N_JOY_ADC_VALUES; j++) {
+            // Don't compare value with itself
+            if (j == i)
+                continue;
+            uint16_t jval = joyAdcValues[j];
+            if (jval < ival && (ival - jval < closestDist))
+                closestDist = ival - jval;
+            if (jval > ival && (jval - ival < closestDist))
+                closestDist = jval - ival;
+        } // for j
+
+        // And the fuzz is half the distance to the closest value
+        fuzzValues[i] = closestDist / 2;
+        // DBG("joy%u=%u f=%u, ", i, ival, fuzzValues[i]);
+    } // for i
+}
+
+int ExpressLRSFiveWay::readKey()
+{
+    uint16_t value = analogRead(PIN_JOYSTICK);
+
+    constexpr uint8_t IDX_TO_INPUT[N_JOY_ADC_VALUES - 1] = {UP, DOWN, LEFT, RIGHT, OK};
+    for (unsigned int i = 0; i < N_JOY_ADC_VALUES - 1; ++i) {
+        if (value < (joyAdcValues[i] + fuzzValues[i]) && value > (joyAdcValues[i] - fuzzValues[i]))
+            return IDX_TO_INPUT[i];
+    }
+    return NO_PRESS;
+}
+
+ExpressLRSFiveWay::ExpressLRSFiveWay() : concurrency::OSThread(inputSourceName)
+{
+    // ExpressLRS: init values
+    isLongPressed = false;
+    keyInProcess = NO_PRESS;
+    keyDownStart = 0;
+
+    // Express LRS: calculate the threshold for interpreting ADC values as various buttons
+    calcFuzzValues();
+
+    // Meshtastic: register with canned messages
+    inputBroker->registerSource(this);
+}
+
+// ExpressLRS: interpret reading as key events
+void ExpressLRSFiveWay::update(int *keyValue, bool *keyLongPressed)
+{
+    *keyValue = NO_PRESS;
+
+    int newKey = readKey();
+    uint32_t now = millis();
+    if (keyInProcess == NO_PRESS) {
+        // New key down
+        if (newKey != NO_PRESS) {
+            keyDownStart = now;
+            // DBGLN("down=%u", newKey);
+        }
+    } else {
+        // if key released
+        if (newKey == NO_PRESS) {
+            // DBGLN("up=%u", keyInProcess);
+            if (!isLongPressed) {
+                if ((now - keyDownStart) > KEY_DEBOUNCE_MS) {
+                    *keyValue = keyInProcess;
+                    *keyLongPressed = false;
+                }
+            }
+            isLongPressed = false;
+        }
+        // else if the key has changed while down, reset state for next go-around
+        else if (newKey != keyInProcess) {
+            newKey = NO_PRESS;
+        }
+        // else still pressing, waiting for long if not already signaled
+        else if (!isLongPressed) {
+            if ((now - keyDownStart) > KEY_LONG_PRESS_MS) {
+                *keyValue = keyInProcess;
+                *keyLongPressed = true;
+                isLongPressed = true;
+            }
+        }
+    } // if keyInProcess != NO_PRESS
+
+    keyInProcess = newKey;
+}
+
+// Meshtastic: runs at regular intervals
+int32_t ExpressLRSFiveWay::runOnce()
+{
+    uint32_t now = millis();
+
+    // Dismiss any alert frames after 2 seconds
+    // Feedback for GPS toggle / adhoc ping
+    if (alerting && now > alertingSinceMs + 2000) {
+        alerting = false;
+        screen->endAlert();
+    }
+
+    // Get key events from ExpressLRS code
+    int keyValue;
+    bool longPressed;
+    update(&keyValue, &longPressed);
+
+    // Do something about this key press
+    determineAction((KeyType)keyValue, longPressed ? LONG : SHORT);
+
+    // If there has been recent key activity, poll the joystick slightly more frequently
+    if (now < keyDownStart + (20 * 1000UL)) // Within last 20 seconds
+        return 100;
+
+    // Otherwise, poll slightly less often
+    // Too many missed pressed if much slower than 250ms
+    return 250;
+}
+
+// Determine what action to take when a button press is detected
+// Written verbose for easier remapping by user
+void ExpressLRSFiveWay::determineAction(KeyType key, PressLength length)
+{
+    switch (key) {
+    case LEFT:
+        if (inCannedMessageMenu()) // If in canned message menu
+            sendKey(CANCEL);       // exit the menu (press imaginary cancel key)
+        else
+            sendKey(LEFT);
+        break;
+
+    case RIGHT:
+        if (inCannedMessageMenu()) // If in canned message menu:
+            sendKey(CANCEL);       // exit the menu (press imaginary cancel key)
+        else
+            sendKey(RIGHT);
+        break;
+
+    case UP:
+        if (length == LONG)
+            toggleGPS();
+        else
+            sendKey(UP);
+        break;
+
+    case DOWN:
+        if (length == LONG)
+            sendAdhocPing();
+        else
+            sendKey(DOWN);
+        break;
+
+    case OK:
+        if (length == LONG)
+            shutdown();
+        else
+            click(); // Use instead of sendKey(OK). Works better when canned message module disabled
+        break;
+
+    default:
+        break;
+    }
+}
+
+// Feed input to the canned messages module
+void ExpressLRSFiveWay::sendKey(KeyType key)
+{
+    InputEvent e;
+    e.source = inputSourceName;
+    e.inputEvent = key;
+    notifyObservers(&e);
+}
+
+// Enable or Disable a connected GPS
+// Contained as one method for easier remapping of buttons by user
+void ExpressLRSFiveWay::toggleGPS()
+{
+#if HAS_GPS && !MESHTASTIC_EXCLUDE_GPS
+    if (!config.device.disable_triple_click && (gps != nullptr)) {
+        gps->toggleGpsMode();
+        screen->startAlert("GPS Toggled");
+        alerting = true;
+        alertingSinceMs = millis();
+    }
+#endif
+}
+
+// Send either node-info or position, on demand
+// Contained as one method for easier remapping of buttons by user
+void ExpressLRSFiveWay::sendAdhocPing()
+{
+    service->refreshLocalMeshNode();
+    bool sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
+
+    // Show custom alert frame, with multi-line centering
+    screen->startAlert([sentPosition](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
+        uint16_t x_offset = display->width() / 2;
+        uint16_t y_offset = 26; // Same constant as the default startAlert frame
+        display->setTextAlignment(TEXT_ALIGN_CENTER);
+        display->setFont(FONT_MEDIUM);
+        display->drawString(x_offset + x, y_offset + y, "Sent ad-hoc");
+        display->drawString(x_offset + x, y_offset + FONT_HEIGHT_MEDIUM + y, sentPosition ? "position" : "nodeinfo");
+    });
+
+    alerting = true;
+    alertingSinceMs = millis();
+}
+
+// Shutdown the node (enter deep-sleep)
+// Contained as one method for easier remapping of buttons by user
+void ExpressLRSFiveWay::shutdown()
+{
+    LOG_INFO("Shutdown from long press\n");
+    powerFSM.trigger(EVENT_PRESS);
+    screen->startAlert("Shutting down...");
+    // Don't set alerting = true. We don't want to auto-dismiss this alert.
+
+    playShutdownMelody(); // In case user adds a buzzer
+
+    shutdownAtMsec = millis() + 3000;
+}
+
+// Emulate user button, or canned message SELECT
+// This is necessary as canned message module doesn't translate SELECT to user button presses if the module is disabled
+// Contained as one method for easier remapping of buttons by user
+void ExpressLRSFiveWay::click()
+{
+    if (!moduleConfig.canned_message.enabled)
+        powerFSM.trigger(EVENT_PRESS);
+    else
+        sendKey(OK);
+}
+
+ExpressLRSFiveWay *expressLRSFiveWayInput = nullptr;
+
+#endif

src/input/ExpressLRSFiveWay.h

@@ -0,0 +1,85 @@
+/*
+    Input source for Radio Master Bandit Nano, and similar hardware.
+    Devices have a 5-button "resistor ladder" style joystick, read by ADC.
+    These devices do not use the ADC to monitor input voltage.
+
+    Much of this code taken directly from ExpressLRS FiveWayButton class:
+    https://github.com/ExpressLRS/ExpressLRS/tree/d9f56f8bd6f9f7144d5f01caaca766383e1e0950/src/lib/SCREEN/FiveWayButton
+*/
+
+#pragma once
+
+#include "configuration.h"
+
+#ifdef INPUTBROKER_EXPRESSLRSFIVEWAY_TYPE
+
+#include <esp_adc_cal.h>
+#include <soc/adc_channel.h>
+
+#include "InputBroker.h"
+#include "MeshService.h" // For adhoc ping action
+#include "buzz.h"
+#include "concurrency/OSThread.h"
+#include "graphics/Screen.h" // Feedback for adhoc ping / toggle GPS
+#include "main.h"
+#include "modules/CannedMessageModule.h"
+
+#if HAS_GPS && !MESHTASTIC_EXCLUDE_GPS
+#include "GPS.h" // For toggle GPS action
+#endif
+
+class ExpressLRSFiveWay : public Observable<const InputEvent *>, public concurrency::OSThread
+{
+  private:
+    // Number of values in JOY_ADC_VALUES, if defined
+    // These must be ADC readings for {UP, DOWN, LEFT, RIGHT, ENTER, IDLE}
+    static constexpr size_t N_JOY_ADC_VALUES = 6;
+    static constexpr uint32_t KEY_DEBOUNCE_MS = 25;
+    static constexpr uint32_t KEY_LONG_PRESS_MS = 3000; // How many milliseconds to hold key for a long press
+
+    // This merged an enum used by the ExpressLRS code, with meshtastic canned message values
+    // Key names are kept simple, to allow user customizaton
+    typedef enum {
+        UP = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP,
+        DOWN = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN,
+        LEFT = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT,
+        RIGHT = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT,
+        OK = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT,
+        CANCEL = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL,
+        NO_PRESS = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE
+    } KeyType;
+
+    typedef enum { SHORT, LONG } PressLength;
+
+    // From ExpressLRS
+    int keyInProcess;
+    uint32_t keyDownStart;
+    bool isLongPressed;
+    const uint16_t joyAdcValues[N_JOY_ADC_VALUES] = {JOYSTICK_ADC_VALS};
+    uint16_t fuzzValues[N_JOY_ADC_VALUES];
+    void calcFuzzValues();
+    int readKey();
+    void update(int *keyValue, bool *keyLongPressed);
+
+    // Meshtastic code
+    void determineAction(KeyType key, PressLength length);
+    void sendKey(KeyType key);
+    inline bool inCannedMessageMenu() { return cannedMessageModule->shouldDraw(); }
+    int32_t runOnce() override;
+
+    // Simplified Meshtastic actions, for easier remapping by user
+    void toggleGPS();
+    void sendAdhocPing();
+    void shutdown();
+    void click();
+
+    bool alerting = false;        // Is the screen showing an alert frame? Feedback for GPS toggle / adhoc ping actions
+    uint32_t alertingSinceMs = 0; // When did screen begin showing an alert frame? Used to auto-dismiss
+
+  public:
+    ExpressLRSFiveWay();
+};
+
+extern ExpressLRSFiveWay *expressLRSFiveWayInput;
+
+#endif

src/input/ScanAndSelect.cpp

@@ -0,0 +1,204 @@
+#include "configuration.h"
+
+// Normally these input methods are protected by guarding in setupModules
+// In order to have the user button dismiss the canned message frame, this class lightly interacts with the Screen class
+#if HAS_SCREEN
+
+#include "ScanAndSelect.h"
+#include "modules/CannedMessageModule.h"
+
+// Config
+static const char name[] = "scanAndSelect"; // should match "allow input source" string
+static constexpr uint32_t durationShortMs = 50;
+static constexpr uint32_t durationLongMs = 1500;
+static constexpr uint32_t durationAlertMs = 2000;
+
+// Constructor: init base class
+ScanAndSelectInput::ScanAndSelectInput() : concurrency::OSThread(name) {}
+
+// Attempt to setup class; true if success.
+// Called by setupModules method. Instance deleted if setup fails.
+bool ScanAndSelectInput::init()
+{
+    // Short circuit: Canned messages enabled?
+    if (!moduleConfig.canned_message.enabled)
+        return false;
+
+    // Short circuit: Using correct "input source"?
+    // Todo: protobuf enum instead of string?
+    if (strcasecmp(moduleConfig.canned_message.allow_input_source, name) != 0)
+        return false;
+
+    // Use any available inputbroker pin as the button
+    if (moduleConfig.canned_message.inputbroker_pin_press)
+        pin = moduleConfig.canned_message.inputbroker_pin_press;
+    else if (moduleConfig.canned_message.inputbroker_pin_a)
+        pin = moduleConfig.canned_message.inputbroker_pin_a;
+    else if (moduleConfig.canned_message.inputbroker_pin_b)
+        pin = moduleConfig.canned_message.inputbroker_pin_b;
+    else
+        return false; // Short circuit: no button found
+
+    // Set-up the button
+    pinMode(pin, INPUT_PULLUP);
+    attachInterrupt(pin, handleChangeInterrupt, CHANGE);
+
+    // Connect our class to the canned message module
+    inputBroker->registerSource(this);
+
+    LOG_INFO("Initialized 'Scan and Select' input for Canned Messages, using pin %d\n", pin);
+    return true; // Init succeded
+}
+
+// Runs periodically, unless sleeping between presses
+int32_t ScanAndSelectInput::runOnce()
+{
+    uint32_t now = millis();
+
+    // If: "no messages added" alert screen currently shown
+    if (alertingNoMessage) {
+        // Dismiss the alert screen several seconds after it appears
+        if (now > alertingSinceMs + durationAlertMs) {
+            alertingNoMessage = false;
+            screen->endAlert();
+        }
+    }
+
+    // If: Button is pressed
+    if (digitalRead(pin) == LOW) {
+        // New press
+        if (!held) {
+            downSinceMs = now;
+        }
+
+        // Existing press
+        else {
+            // Duration enough for long press
+            // Long press not yet fired (prevent repeat firing while held)
+            if (!longPressFired && now - downSinceMs > durationLongMs) {
+                longPressFired = true;
+                longPress();
+            }
+        }
+
+        // Record the change of state: button is down
+        held = true;
+    }
+
+    // If: Button is not pressed
+    else {
+        // Button newly released
+        // Long press event didn't already fire
+        if (held && !longPressFired) {
+            // Duration enough for short press
+            if (now - downSinceMs > durationShortMs) {
+                shortPress();
+            }
+        }
+
+        // Record the change of state: button is up
+        held = false;
+        longPressFired = false; // Re-Arm: allow another long press
+    }
+
+    // If thread's job is done, let it sleep
+    if (!held && !alertingNoMessage) {
+        Thread::canSleep = true;
+        return OSThread::disable();
+    }
+
+    // Run this method again is a few ms
+    return durationShortMs;
+}
+
+void ScanAndSelectInput::longPress()
+{
+    // (If canned messages set)
+    if (cannedMessageModule->hasMessages()) {
+        // If module frame displayed already, send the current message
+        if (cannedMessageModule->shouldDraw())
+            raiseEvent(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT);
+
+        // Otherwise, initial long press opens the module frame
+        else
+            raiseEvent(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN);
+    }
+
+    // (If canned messages not set) tell the user
+    else
+        alertNoMessage();
+}
+
+void ScanAndSelectInput::shortPress()
+{
+    // (If canned messages set) scroll to next message
+    if (cannedMessageModule->hasMessages())
+        raiseEvent(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN);
+
+    // (If canned messages not yet set) tell the user
+    else
+        alertNoMessage();
+}
+
+// Begin running runOnce at regular intervals
+// Called from pin change interrupt
+void ScanAndSelectInput::enableThread()
+{
+    Thread::canSleep = false;
+    OSThread::enabled = true;
+    OSThread::setIntervalFromNow(0);
+}
+
+// Inform user (screen) that no canned messages have been added
+// Automatically dismissed after several seconds
+void ScanAndSelectInput::alertNoMessage()
+{
+    alertingNoMessage = true;
+    alertingSinceMs = millis();
+
+    // Graphics code: the alert frame to show on screen
+    screen->startAlert([](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
+        display->setTextAlignment(TEXT_ALIGN_CENTER_BOTH);
+        display->setFont(FONT_SMALL);
+        int16_t textX = display->getWidth() / 2;
+        int16_t textY = display->getHeight() / 2;
+        display->drawString(textX + x, textY + y, "No Canned Messages");
+    });
+}
+
+// Remove the canned message frame from screen
+// Used to dismiss the module frame when user button pressed
+// Returns true if the frame was previously displayed, and has now been closed
+// Return value consumed by Screen class when determining how to handle user button
+bool ScanAndSelectInput::dismissCannedMessageFrame()
+{
+    if (cannedMessageModule->shouldDraw()) {
+        raiseEvent(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL);
+        return true;
+    }
+
+    return false;
+}
+
+// Feed input to the canned messages module
+void ScanAndSelectInput::raiseEvent(_meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar key)
+{
+    InputEvent e;
+    e.source = name;
+    e.inputEvent = key;
+    notifyObservers(&e);
+}
+
+// Pin change interrupt
+void ScanAndSelectInput::handleChangeInterrupt()
+{
+    // Because we need to detect both press and release (rising and falling edge), the interrupt itself can't determine the
+    // action. Instead, we start up the thread and get it to read the button for us
+
+    // The instance we're referring to here is created in setupModules()
+    scanAndSelectInput->enableThread();
+}
+
+ScanAndSelectInput *scanAndSelectInput = nullptr; // Instantiated in setupModules method. Deleted if unused, or init() fails
+
+#endif

src/input/ScanAndSelect.h

@@ -0,0 +1,50 @@
+/*
+    A "single button" input method for Canned Messages
+
+    - Short press to cycle through messages
+    - Long Press to send
+
+    To use:
+        - set "allow input source" to "scanAndSelect"
+        - set the single button's GPIO as either pin A, pin B, or pin Press
+
+    Originally designed to make use of "extra" built-in button on some boards.
+    Non-intrusive; suitable for use as a default module config.
+*/
+
+#pragma once
+#include "concurrency/OSThread.h"
+#include "main.h"
+
+// Normally these input methods are protected by guarding in setupModules
+// In order to have the user button dismiss the canned message frame, this class lightly interacts with the Screen class
+#if HAS_SCREEN
+
+class ScanAndSelectInput : public Observable<const InputEvent *>, public concurrency::OSThread
+{
+  public:
+    ScanAndSelectInput();             // No-op constructor, only initializes OSThread base class
+    bool init();                      // Attempt to setup class; true if success. Instance deleted if setup fails
+    bool dismissCannedMessageFrame(); // Remove the canned message frame from screen. True if frame was open, and now closed.
+    void alertNoMessage();            // Inform user (screen) that no canned messages have been added
+
+  protected:
+    int32_t runOnce() override;          // Runs at regular intervals, when enabled
+    void enableThread();                 // Begin running runOnce at regular intervals
+    static void handleChangeInterrupt(); // Calls enableThread from pin change interrupt
+    void shortPress();                   // Code to run when short press fires
+    void longPress();                    // Code to run when long press fires
+    void raiseEvent(_meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar key); // Feed input to canned message module
+
+    bool held = false;           // Have we handled a change in button state?
+    bool longPressFired = false; // Long press fires while button still held. This bool ensures the release is no-op
+    uint32_t downSinceMs = 0;    // Debouncing for short press, timing for long press
+    uint8_t pin = -1;            // Read from cannned message config during init
+
+    bool alertingNoMessage = false; // Is the "no canned messages" alert shown on screen?
+    uint32_t alertingSinceMs = 0;   // Used to dismiss the "no canned message" alert several seconds
+};
+
+extern ScanAndSelectInput *scanAndSelectInput; // Instantiated in setupModules method. Deleted if unused, or init() fails
+
+#endif