tryfix: init change for BME680 (#3965)

* added AHTx0 sensor

* AHT10 definition in protobuf

* AHT10 definition in protobuf

* protobufs

* Management of AHT20+BMP280 module

* missing newline in log

* missing newline in log

* dragino trackerd support

* dragino trackerd support

* revert back .gitmodules

* reverted gitignore

* merged telemetry.pb.h

* merged telemetry.pb.h

* removed extra script, now bin version works

* reverted

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.github/ISSUE_TEMPLATE/feature.yml

@@ -16,6 +16,9 @@ body:
       options:
         - NRF52
         - ESP32
+        - RP2040
+        - Linux Native
+        - other
     validations:
       required: true
   - type: textarea

.github/actions/setup-base/action.yml

@@ -5,7 +5,7 @@ runs:
   using: "composite"
   steps:
     - name: Checkout code
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
       with:
         submodules: "recursive"
         ref: ${{github.event.pull_request.head.ref}}
@@ -30,12 +30,12 @@ runs:
         sudo apt-get install -y libyaml-cpp-dev
 
     - name: Setup Python
-      uses: actions/setup-python@v4
+      uses: actions/setup-python@v5
       with:
         python-version: 3.x
 
     - name: Cache python libs
-      uses: actions/cache@v3
+      uses: actions/cache@v4
       id: cache-pip # needed in if test
       with:
         path: ~/.cache/pip

.github/workflows/build_esp32.yml

@@ -11,13 +11,13 @@ jobs:
   build-esp32:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/web
           file: build.tar
@@ -35,12 +35,13 @@ jobs:
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
 
       - name: Build ESP32
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/firmware-ota
           file: firmware.bin
@@ -53,9 +54,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/*.bin
             release/*.elf

.github/workflows/build_esp32_c3.yml

@@ -0,0 +1,63 @@
+name: Build ESP32-C3
+
+on:
+  workflow_call:
+    inputs:
+      board:
+        required: true
+        type: string
+
+permissions: read-all
+
+jobs:
+  build-esp32-c3:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Build base
+        id: base
+        uses: ./.github/actions/setup-base
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Unpack web ui
+        run: |
+          tar -xf build.tar -C data/static
+          rm build.tar
+      - name: Remove debug flags for release
+        if: ${{ github.event_name == 'workflow_dispatch' }}
+        run: |
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
+      - name: Build ESP32
+        run: bin/build-esp32.sh ${{ inputs.board }}
+
+      - name: Pull OTA Firmware
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/firmware-ota
+          file: firmware-c3.bin
+          target: release/bleota-c3.bin
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        shell: bash
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/*.bin
+            release/*.elf

.github/workflows/build_esp32_s3.yml

@@ -11,13 +11,13 @@ jobs:
   build-esp32-s3:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
 
       - name: Pull web ui
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/web
           file: build.tar
@@ -34,11 +34,12 @@ jobs:
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s2.ini
           sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32s3.ini
+          sed -i '/DDEBUG_HEAP/d' ./arch/esp32/esp32c3.ini
       - name: Build ESP32
         run: bin/build-esp32.sh ${{ inputs.board }}
 
       - name: Pull OTA Firmware
-        uses: dsaltares/fetch-gh-release-asset@a40c8b4a0471f9ab81bdf73a010f74cc51476ad4
+        uses: dsaltares/fetch-gh-release-asset@master
         with:
           repo: meshtastic/firmware-ota
           file: firmware-s3.bin
@@ -51,9 +52,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/*.bin
             release/*.elf

.github/workflows/build_nrf52.yml

@@ -11,7 +11,7 @@ jobs:
   build-nrf52:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -24,9 +24,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/*.uf2
             release/*.elf

.github/workflows/build_raspbian.yml

@@ -10,8 +10,13 @@ jobs:
   build-raspbian:
     runs-on: [self-hosted, linux, ARM64]
     steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
@@ -37,9 +42,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
-            release/meshtasticd_linux_arm64
+            release/meshtasticd_linux_aarch64
             bin/config-dist.yaml

.github/workflows/build_raspbian_armv7l.yml

@@ -0,0 +1,51 @@
+name: Build Raspbian Arm
+
+on: workflow_call
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian-armv7l:
+    runs-on: [self-hosted, linux, ARM]
+    steps:
+      - name: Install libbluetooth
+        shell: bash
+        run: |
+          apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev
+
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Upgrade python tools
+        shell: bash
+        run: |
+          python -m pip install --upgrade pip
+          pip install -U platformio adafruit-nrfutil
+          pip install -U meshtastic --pre
+
+      - name: Upgrade platformio
+        shell: bash
+        run: |
+          pio upgrade
+
+      - name: Build Raspbian
+        run: bin/build-native.sh
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Store binaries as an artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          overwrite: true
+          path: |
+            release/meshtasticd_linux_armv7l
+            bin/config-dist.yaml

.github/workflows/build_rpi2040.yml

@@ -11,7 +11,7 @@ jobs:
   build-rpi2040:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -24,9 +24,10 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ inputs.board }}-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/*.uf2
             release/*.elf

.github/workflows/main_matrix.yml

@@ -8,7 +8,7 @@ on:
     branches: [master, develop]
     paths-ignore:
       - "**.md"
-      - "version.properties"
+      - version.properties
 
   # Note: This is different from "pull_request". Need to specify ref when doing checkouts.
   pull_request_target:
@@ -20,129 +20,99 @@ on:
   workflow_dispatch:
 
 jobs:
-  check:
+  setup:
     strategy:
       fail-fast: false
       matrix:
-        include:
-          - board: rak11200
-          - board: tlora-v2-1-1_6
-          - board: tbeam
-          - board: heltec-v2_1
-          - board: meshtastic-diy-v1
-          - board: rak4631
-          - board: t-echo
-          - board: station-g1
-          - board: m5stack-coreink
-          - board: tbeam-s3-core
-          - board: tlora-t3s3-v1
-          - board: t-watch-s3
-          - board: t-deck
-          #- board: rak11310
+        arch: [esp32, esp32s3, esp32c3, nrf52840, rp2040, check]
+    runs-on: ubuntu-latest
+    steps:
+      - id: checkout
+        uses: actions/checkout@v4
+        name: Checkout base
+      - id: jsonStep
+        run: |
+          TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}})
+          echo "$TARGETS"
+          echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
+    outputs:
+      esp32: ${{ steps.jsonStep.outputs.esp32 }}
+      esp32s3: ${{ steps.jsonStep.outputs.esp32s3 }}
+      esp32c3: ${{ steps.jsonStep.outputs.esp32c3 }}
+      nrf52840: ${{ steps.jsonStep.outputs.nrf52840 }}
+      rp2040: ${{ steps.jsonStep.outputs.rp2040 }}
+      check: ${{ steps.jsonStep.outputs.check }}
+
+  check:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.check) }}
 
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
-
-      - name: Trunk Check
-        if: ${{ github.event_name != 'workflow_dispatch' }}
-        uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b
-
       - name: Check ${{ matrix.board }}
         run: bin/check-all.sh ${{ matrix.board }}
 
   build-esp32:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        include:
-          - board: rak11200
-          - board: tlora-v2
-          - board: tlora-v1
-          - board: tlora_v1_3
-          - board: tlora-v2-1-1_6
-          - board: tlora-v2-1-1_8
-          - board: tbeam
-          - board: heltec-ht62-esp32c3-sx1262
-          - board: heltec-v1
-          - board: heltec-v2_0
-          - board: heltec-v2_1
-          - board: tbeam0_7
-          - board: meshtastic-diy-v1
-          - board: hydra
-          - board: meshtastic-dr-dev
-          - board: nano-g1
-          - board: station-g1
-          - board: m5stack-core
-          - board: m5stack-coreink
-          - board: nano-g1-explorer
+      matrix: ${{ fromJson(needs.setup.outputs.esp32) }}
     uses: ./.github/workflows/build_esp32.yml
     with:
       board: ${{ matrix.board }}
 
   build-esp32-s3:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        include:
-          - board: heltec-v3
-          - board: heltec-wsl-v3
-          - board: heltec-wireless-tracker
-          - board: heltec-wireless-paper
-          - board: tbeam-s3-core
-          - board: tlora-t3s3-v1
-          - board: t-watch-s3
-          - board: t-deck
-          - board: picomputer-s3
+      matrix: ${{ fromJson(needs.setup.outputs.esp32s3) }}
     uses: ./.github/workflows/build_esp32_s3.yml
     with:
       board: ${{ matrix.board }}
 
-  build-nrf52:
+  build-esp32-c3:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        include:
-          - board: rak4631
-          - board: rak4631_eink
-          - board: monteops_hw1
-          - board: t-echo
-          - board: pca10059_diy_eink
-          - board: feather_diy
-          - board: nano-g2-ultra
+      matrix: ${{ fromJson(needs.setup.outputs.esp32c3) }}
+    uses: ./.github/workflows/build_esp32_c3.yml
+    with:
+      board: ${{ matrix.board }}
+
+  build-nrf52:
+    needs: setup
+    strategy:
+      fail-fast: false
+      matrix: ${{ fromJson(needs.setup.outputs.nrf52840) }}
     uses: ./.github/workflows/build_nrf52.yml
     with:
       board: ${{ matrix.board }}
 
   build-rpi2040:
+    needs: setup
     strategy:
       fail-fast: false
-      matrix:
-        include:
-          - board: pico
-          - board: picow
-          - board: rak11310
-          - board: senselora_rp2040
+      matrix: ${{ fromJson(needs.setup.outputs.rp2040) }}
     uses: ./.github/workflows/build_rpi2040.yml
     with:
       board: ${{ matrix.board }}
 
-  build-raspbian:
-    strategy:
-      fail-fast: false
-      max-parallel: 1
-    uses: ./.github/workflows/build_raspbian.yml
-
   package-raspbian:
     uses: ./.github/workflows/package_raspbian.yml
 
+  package-raspbian-armv7l:
+    uses: ./.github/workflows/package_raspbian_armv7l.yml
+
   build-native:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Build base
         id: base
         uses: ./.github/actions/setup-base
@@ -165,27 +135,27 @@ jobs:
         id: version
 
       - name: Store binaries as an artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-native-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: |
             release/device-*.sh
             release/device-*.bat
 
       - name: Docker login
         if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/login-action@v2
+        uses: docker/login-action@v3
         with:
           username: meshtastic
           password: ${{ secrets.DOCKER_TOKEN }}
-
       - name: Docker setup
         if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/setup-buildx-action@v2
+        uses: docker/setup-buildx-action@v3
 
       - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
-        uses: docker/build-push-action@v3
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./Dockerfile
@@ -194,7 +164,7 @@ jobs:
 
       - name: Docker build and push
         if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        uses: docker/build-push-action@v3
+        uses: docker/build-push-action@v5
         with:
           context: .
           file: ./Dockerfile
@@ -206,7 +176,7 @@ jobs:
     needs: [check]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
@@ -220,22 +190,24 @@ jobs:
       [
         build-esp32,
         build-esp32-s3,
+        build-esp32-c3,
         build-nrf52,
-        build-raspbian,
         build-native,
         build-rpi2040,
         package-raspbian,
+        package-raspbian-armv7l,
       ]
     steps:
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
           path: ./
+          merge-multiple: true
 
       - name: Display structure of downloaded files
         run: ls -R
@@ -245,25 +217,30 @@ jobs:
         id: version
 
       - name: Move files up
-        run: mv -b -t ./ ./*tbeam-2*/littlefs*.bin ./*tbeam-2*/bleota.bin ./*tbeam-s3*/bleota-s3.bin ./**/firmware*.bin ./*t-echo*/Meshtastic_nRF52_factory_erase.uf2 ./**/firmware-*.uf2 ./**/firmware-*-ota.zip ./**/*.elf ./*native*/*device-*.sh ./*native*/*device-*.bat ./firmware-raspbian-*/release/meshtasticd_linux_arm64 ./firmware-raspbian-*/bin/config-dist.yaml
+        run: mv -b -t ./ ./release/meshtasticd_linux_aarch64 ./release/meshtasticd_linux_armv7l ./bin/config-dist.yaml
 
       - name: Repackage in single firmware zip
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: firmware-${{ steps.version.outputs.version }}
+          overwrite: true
           path: |
-            ./*.bin
-            ./*.uf2
+            ./firmware-*.bin
+            ./firmware-*.uf2
             ./firmware-*-ota.zip
             ./device-*.sh
             ./device-*.bat
-            ./meshtasticd_linux_arm64
+            ./meshtasticd_linux_*
             ./config-dist.yaml
+            ./littlefs-*.bin
+            ./bleota*bin
+            ./Meshtastic_nRF52_factory_erase*.uf2
           retention-days: 90
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
           name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
           path: ./output
 
       # For diagnostics
@@ -279,9 +256,10 @@ jobs:
         run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
       - name: Repackage in single elfs zip
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          overwrite: true
           path: ./*.elf
           retention-days: 30
 
@@ -303,10 +281,10 @@ jobs:
     needs: [gather-artifacts, after-checks]
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Setup Python
-        uses: actions/setup-python@v4
+        uses: actions/setup-python@v5
         with:
           python-version: 3.x
 
@@ -314,14 +292,17 @@ jobs:
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
           name: firmware-${{ steps.version.outputs.version }}
+          merge-multiple: true
           path: ./output
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
-          name: artifact-deb
+          pattern: meshtasticd_${{ steps.version.outputs.version }}_*.deb
+          merge-multiple: true
+          path: ./output
 
       - name: Display structure of downloaded files
         run: ls -R
@@ -334,9 +315,10 @@ jobs:
       - name: Zip firmware
         run: zip -j -9 -r ./firmware-${{ steps.version.outputs.version }}.zip ./output
 
-      - uses: actions/download-artifact@v3
+      - uses: actions/download-artifact@v4
         with:
           name: debug-elfs-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
           path: ./elfs
 
       - name: Zip Elfs
@@ -379,22 +361,32 @@ jobs:
           asset_name: debug-elfs-${{ steps.version.outputs.version }}.zip
           asset_content_type: application/zip
 
-      - name: Add raspbian .deb
+      - name: Add raspbian aarch64 .deb
         uses: actions/upload-release-asset@v1
         env:
           GITHUB_TOKEN: ${{ github.token }}
         with:
           upload_url: ${{ steps.create_release.outputs.upload_url }}
-          asset_path: ./meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
           asset_name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
           asset_content_type: application/vnd.debian.binary-package
 
+      - name: Add raspbian armv7l .deb
+        uses: actions/upload-release-asset@v1
+        env:
+          GITHUB_TOKEN: ${{ github.token }}
+        with:
+          upload_url: ${{ steps.create_release.outputs.upload_url }}
+          asset_path: ./output/meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          asset_content_type: application/vnd.debian.binary-package
+
       - name: Bump version.properties
         run: >-
           bin/bump_version.py
 
       - name: Create version.properties pull request
-        uses: peter-evans/create-pull-request@v3
+        uses: peter-evans/create-pull-request@v6
         with:
           add-paths: |
             version.properties

.github/workflows/nightly.yml

@@ -11,7 +11,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@782e83f803ca6e369f035d64c6ba2768174ba61b

.github/workflows/package_raspbian.yml

@@ -17,33 +17,48 @@ jobs:
     needs: build-raspbian
     steps:
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           submodules: recursive
           ref: ${{github.event.pull_request.head.ref}}
           repository: ${{github.event.pull_request.head.repo.full_name}}
 
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
       - name: Get release version string
         run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
         id: version
 
       - name: Download artifacts
-        uses: actions/download-artifact@v3
+        uses: actions/download-artifact@v4
         with:
           name: firmware-raspbian-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
 
       - name: Display structure of downloaded files
         run: ls -R
 
       - name: build .debpkg
         run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
           mkdir -p .debpkg/usr/lib/systemd/system/
-          cp release/meshtasticd_linux_arm64 .debpkg/usr/sbin/meshtasticd
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
           chmod +x .debpkg/usr/sbin/meshtasticd
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
 
       - uses: jiro4989/build-deb-action@v3
         with:
@@ -52,11 +67,12 @@ jobs:
           maintainer: Jonathan Bennett
           version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
           arch: arm64
-          depends: libyaml-cpp0.7
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
           desc: Native Linux Meshtastic binary.
 
-      - uses: actions/upload-artifact@v3
+      - uses: actions/upload-artifact@v4
         with:
-          name: artifact-deb
+          name: meshtasticd_${{ steps.version.outputs.version }}_arm64.deb
+          overwrite: true
           path: |
             ./*.deb

.github/workflows/package_raspbian_armv7l.yml

@@ -0,0 +1,78 @@
+name: Package Raspbian
+
+on:
+  workflow_call:
+  workflow_dispatch:
+
+permissions:
+  contents: write
+  packages: write
+
+jobs:
+  build-raspbian_armv7l:
+    uses: ./.github/workflows/build_raspbian_armv7l.yml
+
+  package-raspbian_armv7l:
+    runs-on: ubuntu-latest
+    needs: build-raspbian_armv7l
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{github.event.pull_request.head.ref}}
+          repository: ${{github.event.pull_request.head.repo.full_name}}
+
+      - name: Pull web ui
+        uses: dsaltares/fetch-gh-release-asset@master
+        with:
+          repo: meshtastic/web
+          file: build.tar
+          target: build.tar
+          token: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Get release version string
+        run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT
+        id: version
+
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          name: firmware-raspbian-armv7l-${{ steps.version.outputs.version }}.zip
+          merge-multiple: true
+
+      - name: Display structure of downloaded files
+        run: ls -R
+
+      - name: build .debpkg
+        run: |
+          mkdir -p .debpkg/DEBIAN
+          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/sbin
+          mkdir -p .debpkg/etc/meshtasticd
+          mkdir -p .debpkg/usr/lib/systemd/system/
+          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz
+          cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
+          cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
+          chmod +x .debpkg/usr/sbin/meshtasticd
+          cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
+          echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
+          chmod +x .debpkg/DEBIAN/conffiles
+
+      - uses: jiro4989/build-deb-action@v3
+        with:
+          package: meshtasticd
+          package_root: .debpkg
+          maintainer: Jonathan Bennett
+          version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.*
+          arch: armhf
+          depends: libyaml-cpp0.7, openssl, libulfius2.7
+          desc: Native Linux Meshtastic binary.
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: meshtasticd_${{ steps.version.outputs.version }}_armhf.deb
+          overwrite: true
+          path: |
+            ./*.deb

.github/workflows/sec_sast_flawfinder.yml

@@ -16,7 +16,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       # step 2
       - name: flawfinder_scan
@@ -27,14 +27,15 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: flawfinder_report.sarif
+          overwrite: true
           path: flawfinder_report.sarif
 
       # step 4
       - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v2
+        uses: github/codeql-action/upload-sarif@v3
         with:
           sarif_file: flawfinder_report.sarif
           category: flawfinder

.github/workflows/sec_sast_semgrep_cron.yml

@@ -17,7 +17,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       # step 2
       - name: full scan
@@ -29,14 +29,15 @@ jobs:
 
       # step 3
       - name: save report as pipeline artifact
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
         with:
           name: report.sarif
+          overwrite: true
           path: report.sarif
 
       # step 4
       - name: publish code scanning alerts
-        uses: github/codeql-action/upload-sarif@v2
+        uses: github/codeql-action/upload-sarif@v3
         with:
           sarif_file: report.sarif
           category: semgrep

.github/workflows/sec_sast_semgrep_pull.yml

@@ -11,7 +11,7 @@ jobs:
     steps:
       # step 1
       - name: clone application source code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           fetch-depth: 0
 

.github/workflows/trunk-check.yml

@@ -16,7 +16,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
 
       - name: Trunk Check
         uses: trunk-io/trunk-action@v1

.github/workflows/update_protobufs.yml

@@ -7,7 +7,7 @@ jobs:
 
     steps:
       - name: Checkout code
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4
         with:
           submodules: true
 
@@ -17,16 +17,16 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.7-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.7-linux-x86.tar.gz
-          mv nanopb-0.4.7-linux-x86 nanopb-0.4.7
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.8-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.8-linux-x86.tar.gz
+          mv nanopb-0.4.8-linux-x86 nanopb-0.4.8
 
       - name: Re-generate protocol buffers
         run: |
           ./bin/regen-protos.sh
 
       - name: Create pull request
-        uses: peter-evans/create-pull-request@v3
+        uses: peter-evans/create-pull-request@v6
         with:
           add-paths: |
             protobufs

.gitignore

@@ -31,3 +31,5 @@ venv/
 release/
 .vscode/extensions.json
 /compile_commands.json
+src/mesh/raspihttp/certificate.pem
+src/mesh/raspihttp/private_key.pem

.trunk/.gitignore

@@ -6,3 +6,4 @@
 plugins
 user_trunk.yaml
 user.yaml
+tmp

.trunk/trunk.yaml

@@ -1,34 +1,36 @@
 version: 0.1
 cli:
-  version: 1.17.2
+  version: 1.22.1
 plugins:
   sources:
     - id: trunk
-      ref: v1.3.0
+      ref: v1.5.0
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - bandit@1.7.5
-    - checkov@3.1.9
-    - terrascan@1.18.5
-    - trivy@0.47.0
+    - trufflehog@3.76.3
+    - yamllint@1.35.1
+    - bandit@1.7.8
+    - checkov@3.2.95
+    - terrascan@1.19.1
+    - trivy@0.51.1
     #- trufflehog@3.63.2-rc0
     - taplo@0.8.1
-    - ruff@0.1.6
-    - isort@5.12.0
-    - markdownlint@0.37.0
-    - oxipng@9.0.0
-    - svgo@3.0.5
-    - actionlint@1.6.26
-    - flake8@6.1.0
+    - ruff@0.4.4
+    - isort@5.13.2
+    - markdownlint@0.40.0
+    - oxipng@9.1.1
+    - svgo@3.3.2
+    - actionlint@1.7.0
+    - flake8@7.0.0
     - hadolint@2.12.0
     - shfmt@3.6.0
-    - shellcheck@0.9.0
-    - black@23.9.1
+    - shellcheck@0.10.0
+    - black@24.4.2
     - git-diff-check
-    - gitleaks@8.18.1
+    - gitleaks@8.18.2
     - clang-format@16.0.3
-    - prettier@3.1.0
+    - prettier@3.2.5
 runtimes:
   enabled:
     - python@3.10.8

.vscode/settings.json

@@ -1,5 +1,7 @@
 {
   "editor.formatOnSave": true,
   "editor.defaultFormatter": "trunk.io",
-  "trunk.enableWindows": true
+  "trunk.enableWindows": true,
+  "files.insertFinalNewline": false,
+  "files.trimFinalNewlines": false
 }

Dockerfile

@@ -1,4 +1,4 @@
-FROM debian:bullseye-slim AS builder
+FROM debian:bookworm-slim AS builder
 
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Etc/UTC
@@ -11,31 +11,45 @@ SHELL ["/bin/bash", "-o", "pipefail", "-c"]
 
 # Install build deps
 USER root
-RUN apt-get update && \
-	apt-get -y install wget python3 g++ zip python3-venv git vim ca-certificates
 
-# create a non-priveleged user & group
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
+                           ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
+                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+    apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
+
+RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
+USER mesh
+
+WORKDIR /tmp/firmware
+RUN python3 -m venv /tmp/firmware 
+RUN source ./bin/activate && pip3 install --no-cache-dir -U platformio==6.1.14
+# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm
+COPY --chown=mesh:mesh . /tmp/firmware
+RUN source ./bin/activate && chmod +x /tmp/firmware/bin/build-native.sh && ./bin/build-native.sh
+RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd"
+
+
+##### PRODUCTION BUILD #############
+
+FROM debian:bookworm-slim
+ENV DEBIAN_FRONTEND=noninteractive
+ENV TZ=Etc/UTC
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+    apt-get clean && rm -rf /var/lib/apt/lists/*
+
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
 USER mesh
-RUN wget https://raw.githubusercontent.com/platformio/platformio-core-installer/master/get-platformio.py -qO /tmp/get-platformio.py && \
-	chmod +x /tmp/get-platformio.py && \
-	python3 /tmp/get-platformio.py && \
-	git clone https://github.com/meshtastic/firmware --recurse-submodules /tmp/firmware && \
-	cd /tmp/firmware && \
-	chmod +x /tmp/firmware/bin/build-native.sh && \
-	source ~/.platformio/penv/bin/activate && \
-	./bin/build-native.sh
 
-FROM frolvlad/alpine-glibc:glibc-2.31
-
-RUN apk --update add --no-cache g++ shadow && \
-	groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
-
-COPY --from=builder /tmp/firmware/release/meshtasticd_linux_amd64 /home/mesh/
-
-USER mesh
 WORKDIR /home/mesh
-CMD sh -cx "./meshtasticd_linux_amd64 --hwid '${HWID:-$RANDOM}'"
+COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/
+
+VOLUME /home/mesh/data
+
+CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]
 
 HEALTHCHECK NONE

arch/esp32/esp32.ini

@@ -1,10 +1,11 @@
 ; Common settings for ESP targes, mixin with extends = esp32_base
 [esp32_base]
 extends = arduino_base
-platform = platformio/espressif32@6.3.2 # This is a temporary fix to the S3-based devices bluetooth issues until we can determine what within ESP-IDF changed and can develop a suitable patch. 
+custom_esp32_kind = esp32
+platform = platformio/espressif32@6.7.0
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 upload_speed = 921600
 debug_init_break = tbreak setup
@@ -15,8 +16,10 @@ board_build.filesystem = littlefs
 # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
 # See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
 # This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_unflags = -fno-lto
 build_flags =
   ${arduino_base.build_flags}
+  -flto
   -Wall
   -Wextra
   -Isrc/platform/esp32

arch/esp32/esp32c3.ini

@@ -1,5 +1,6 @@
 [esp32c3_base]
 extends = esp32_base
+custom_esp32_kind = esp32c3
 
 monitor_speed = 115200
 monitor_filters = esp32_c3_exception_decoder

arch/esp32/esp32s2.ini

@@ -1,16 +1,19 @@
 [esp32s2_base]
 extends = esp32_base
+custom_esp32_kind = esp32s2
 
 build_src_filter = 
-  ${esp32_base.build_src_filter} -<nimble/>
+ ${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
 
 monitor_speed = 115200
 
 build_flags =
   ${esp32_base.build_flags} 
   -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
   
 lib_ignore = 
   ${esp32_base.lib_ignore} 
   NimBLE-Arduino
-
+  libpax

arch/esp32/esp32s3.ini

@@ -1,5 +1,6 @@
 [esp32s3_base]
 extends = esp32_base
+custom_esp32_kind = esp32s3
 
 monitor_speed = 115200
 

arch/nrf52/nrf52.ini

@@ -1,17 +1,18 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.1.0
+platform = platformio/nordicnrf52@^10.4.0
 extends = arduino_base
 
-build_type = debug ; I'm debugging with ICE a lot now
+build_type = debug
 build_flags = 
   ${arduino_base.build_flags}
   -DSERIAL_BUFFER_SIZE=1024
   -Wno-unused-variable
   -Isrc/platform/nrf52
+  -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
 
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2040> -<mesh/eth/> -<mesh/raspihttp>
 
 lib_deps=
   ${arduino_base.lib_deps}

arch/portduino/portduino.ini

@@ -1,6 +1,6 @@
 ; The Portduino based sim environment on top of any host OS, all hardware will be simulated
 [portduino_base]
-platform = https://github.com/meshtastic/platform-native.git#8a66ef82cf38a4135d85cbb5043d0e8ebbb8ba17
+platform = https://github.com/meshtastic/platform-native.git#ad8112adf82ce1f5b917092cf32be07a077801a0
 framework = arduino
 
 build_src_filter = 
@@ -12,6 +12,7 @@ build_src_filter =
   -<platform/rp2040>
   -<mesh/wifi/>
   -<mesh/http/>
+  +<mesh/raspihttp/>
   -<mesh/eth/>
   -<modules/esp32>
   -<modules/Telemetry/EnvironmentTelemetry.cpp>
@@ -23,9 +24,14 @@ lib_deps =
   ${env.lib_deps}
   ${networking_base.lib_deps}
   rweather/Crypto@^0.4.0
+  https://github.com/lovyan03/LovyanGFX.git#5a39989aa2c9492572255b22f033843ec8900233
 
 build_flags =
   ${arduino_base.build_flags}
   -fPIC
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
+  -DPORTDUINO_LINUX_HARDWARE
+  -lbluetooth
+  -lgpiod
+  -lyaml-cpp

arch/rp2040/rp2040.ini

@@ -1,8 +1,8 @@
 ; Common settings for rp2040 Processor based targets
 [rp2040_base]
-platform = https://github.com/maxgerhardt/platform-raspberrypi.git#612de5399d68b359053f1307ed223d400aea975c
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#60d6ae81fcc73c34b1493ca9e261695e471bc0c2
 extends = arduino_base
-platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.6.2
+platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
 
 board_build.core = earlephilhower
 board_build.filesystem_size = 0.5m
@@ -12,7 +12,7 @@ build_flags =
   -D__PLAT_RP2040__
 #  -D _POSIX_THREADS
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
 
 lib_ignore =
   BluetoothOTA

arch/stm32/stm32wl5e.ini

@@ -13,7 +13,7 @@ build_flags =
   -DVECT_TAB_OFFSET=0x08000000
   
 build_src_filter = 
-  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040>
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/Telemetry> -<platform/nrf52> -<platform/portduino> -<platform/rp2040> -<mesh/raspihttp>
 
 board_upload.offset_address = 0x08000000
 upload_protocol = stlink

bin/build-native.sh

@@ -2,6 +2,17 @@
 
 set -e
 
+platformioFailed() {
+	[[ $VIRTUAL_ENV != "" ]] && exit 1 # don't hint at virtualenv if it's already in use
+	echo -e "\nThere were issues running platformio and you are not using a virtual environment." \
+		"\nYou may try setting up virtualenv and downloading the latest platformio from pip:" \
+		"\n\tvirtualenv venv" \
+		"\n\tsource venv/bin/activate" \
+		"\n\tpip install platformio" \
+		"\n\t./bin/build-native.sh # retry building"
+	exit 1
+}
+
 VERSION=$(bin/buildinfo.py long)
 SHORT_VERSION=$(bin/buildinfo.py short)
 
@@ -13,15 +24,8 @@ mkdir -p $OUTDIR/
 rm -r $OUTDIR/* || true
 
 # Important to pull latest version of libs into all device flavors, otherwise some devices might be stale
-platformio pkg update
-
-if command -v raspi-config &>/dev/null; then
-	pio run --environment raspbian
-	cp .pio/build/raspbian/program $OUTDIR/meshtasticd_linux_arm64
-else
-	pio run --environment native
-	cp .pio/build/native/program $OUTDIR/meshtasticd_linux_amd64
-fi
-
+platformio pkg update --environment native || platformioFailed
+pio run --environment native || platformioFailed
+cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)"
 cp bin/device-install.* $OUTDIR
 cp bin/device-update.* $OUTDIR

bin/buildinfo.py

@@ -1,9 +1,8 @@
 #!/usr/bin/env python3
-import configparser
 import sys
+
 from readprops import readProps
 
-
-verObj = readProps('version.properties')
+verObj = readProps("version.properties")
 propName = sys.argv[1]
 print(f"{verObj[propName]}")

bin/check-all.sh

@@ -13,7 +13,7 @@ if [[ $# -gt 0 ]]; then
 	# can override which environment by passing arg
 	BOARDS="$@"
 else
-	BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo pca10059_diy_eink"
+	BOARDS="tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 rak4631 rak4631_eink rak11200 t-echo canaryone pca10059_diy_eink"
 fi
 
 echo "BOARDS:${BOARDS}"

bin/check-dependencies.sh

@@ -8,7 +8,7 @@ if [[ $# -gt 0 ]]; then
 	# can override which environment by passing arg
 	BOARDS="$@"
 else
-    BOARDS="rak4631 rak4631_eink t-echo pca10059_diy_eink pico rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink tbeam-s3-core"
+	BOARDS="rak4631 rak4631_eink t-echo canaryone pca10059_diy_eink pico rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink tbeam-s3-core"
 fi
 
 echo "BOARDS:${BOARDS}"

bin/config-dist.yaml

@@ -1,5 +1,6 @@
 ### Define your devices here using Broadcom pin numbering
 ### Uncomment the block that corresponds to your hardware
+### Including the "Module:" line!
 ---
 Lora:
 #  Module: sx1262  # Waveshare SX126X XXXM
@@ -14,6 +15,12 @@ Lora:
 #  IRQ: 17
 #  Reset: 22
 
+#  Module: sx1262  # pinedio
+#  CS: 0
+#  IRQ: 10
+#  Busy: 11
+#  spidev: spidev0.1
+
 #  Module: RF95  # Adafruit RFM9x
 #  Reset: 25
 #  CS: 7
@@ -31,10 +38,30 @@ Lora:
 #  Busy: 20
 #  Reset: 18
 
+#  Module: sx1268  # SX1268-based modules, tested with Ebyte E22 400M33S
+#  CS: 21
+#  IRQ: 16
+#  Busy: 20
+#  Reset: 18
+#  TXen: 6
+#  RXen: 12
+#  DIO3_TCXO_VOLTAGE: true
+
+#  DIO3_TCXO_VOLTAGE: true  # the Waveshare Core1262 and others are known to need this setting
+
+#  TXen: x  # TX and RX enable pins
+#  RXen: x
+
+#  ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341
+
 ### Set gpio chip to use in /dev/. Defaults to 0.
 ### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
 #  gpiochip: 4
 
+### Specify the SPI device to use in /dev/. Defaults to spidev0.0
+### Some devices, like the pinedio, may require spidev0.1 as a workaround.
+#  spidev: spidev0.0
+
 ### Define GPIO buttons here:
 
 GPIO:
@@ -45,6 +72,11 @@ GPIO:
 GPS:
 #  SerialPath: /dev/ttyS0
 
+### Specify I2C device, or leave blank for none
+
+I2C:
+#  I2CDevice: /dev/i2c-1
+
 ### Set up SPI displays here. Note that I2C displays are generally auto-detected.
 
 Display:
@@ -58,13 +90,55 @@ Display:
 #  Height: 320
 #  Reset: 27
 #  Rotate: true
+#  Invert: true
+
+### Waveshare 1.44inch LCD HAT
+#  Panel: ST7735S
+#  CS: 8         #Chip Select
+#  DC: 25        # Data/Command pin
+#  Backlight: 24
+#  Width: 128
+#  Height: 128
+#  Reset: 27
+#  OffsetX: 0
+#  OffsetY: 0
+
+### Adafruit PiTFT 2.8 TFT+Touchscreen
+#  Panel: ILI9341
+#  CS: 8
+#  DC: 25
+#  Width: 240
+#  Height: 320
+#  Rotate: true
 
 Touchscreen:
-#  Module: XPT2046
+### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching.
+
+#  Module: STMPE610 # Option 1 for Adafruit PiTFT 2.8
+#  CS: 7
+#  IRQ: 24
+
+#  Module: FT5x06 # Option 2 for Adafruit PiTFT 2.8
+#  IRQ: 24
+#  I2CAddr: 0x38
+
+#  Module: XPT2046 # Waveshare 2.8inch
 #  CS: 7
 #  IRQ: 17
 
 ### Configure device for direct keyboard input
 
 Input:
-#  KeyboardDevice: /dev/input/event0
+#  KeyboardDevice: /dev/input/by-id/usb-_Raspberry_Pi_Internal_Keyboard-event-kbd
+
+###
+
+Logging:
+  LogLevel: info # debug, info, warn, error
+
+Webserver:
+#  Port: 443 # Port for Webserver & Webservices
+#  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
+
+General:
+  MaxNodes: 200

bin/device-install.bat

@@ -31,9 +31,13 @@ IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% (
 	%PYTHON% -m esptool --baud 115200 erase_flash
 	%PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME%
     
-    @REM Account for S3 board's different OTA partition
-    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% (
+    @REM Account for S3 and C3 board's different OTA partition
+    IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% (
+        IF x%FILENAME:esp32c3=%==x%FILENAME% (
             %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin
+        ) else (
+            %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin
+        )
 	) else (
         %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin
     )

bin/device-install.sh

@@ -1,12 +1,12 @@
 #!/bin/sh
 
-PYTHON=${PYTHON:-$(which python3 python|head -n 1)}
+PYTHON=${PYTHON:-$(which python3 python | head -n 1)}
 
 set -e
 
 # Usage info
 show_help() {
-cat << EOF
+	cat <<EOF
 Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME]
 Flash image file to device, but first erasing and writing system information"
 
@@ -18,18 +18,20 @@ Flash image file to device, but first erasing and writing system information"
 EOF
 }
 
-
 while getopts ":hp:P:f:" opt; do
 	case "${opt}" in
 	h)
 		show_help
 		exit 0
 		;;
-        p)  export ESPTOOL_PORT=${OPTARG}
+	p)
+		export ESPTOOL_PORT=${OPTARG}
 		;;
-        P)  PYTHON=${OPTARG}
+	P)
+		PYTHON=${OPTARG}
 		;;
-        f)  FILENAME=${OPTARG}
+	f)
+		FILENAME=${OPTARG}
 		;;
 	*)
 		echo "Invalid flag."
@@ -38,20 +40,24 @@ while getopts ":hp:P:f:" opt; do
 		;;
 	esac
 done
-shift "$((OPTIND-1))"
+shift "$((OPTIND - 1))"
 
 [ -z "$FILENAME" -a -n "$1" ] && {
 	FILENAME=$1
 	shift
 }
 
-if [ -f "${FILENAME}" ] && [ ! -z "${FILENAME##*"update"*}" ]; then
+if [ -f "${FILENAME}" ] && [ -n "${FILENAME##*"update"*}" ]; then
 	echo "Trying to flash ${FILENAME}, but first erasing and writing system information"
 	"$PYTHON" -m esptool erase_flash
 	"$PYTHON" -m esptool write_flash 0x00 ${FILENAME}
 	# Account for S3 board's different OTA partition
-	if [ ! -z "${FILENAME##*"s3"*}" ] && [ ! -z "${FILENAME##*"-v3"*}" ] && [ ! -z "${FILENAME##*"t-deck"*}" ] && [ ! -z "${FILENAME##*"wireless-paper"*}" ] && [ ! -z "${FILENAME##*"wireless-tracker"*}" ]; then
+	if [ -n "${FILENAME##*"s3"*}" ] && [ -n "${FILENAME##*"-v3"*}" ] && [ -n "${FILENAME##*"t-deck"*}" ] && [ -n "${FILENAME##*"wireless-paper"*}" ] && [ -n "${FILENAME##*"wireless-tracker"*}" ] && [ -n "${FILENAME##*"station-g2"*}" ] && [ -n "${FILENAME##*"unphone"*}" ]; then
+		if [ -n "${FILENAME##*"esp32c3"*}" ]; then
 			"$PYTHON" -m esptool write_flash 0x260000 bleota.bin
+		else
+			"$PYTHON" -m esptool write_flash 0x260000 bleota-c3.bin
+		fi
 	else
 		"$PYTHON" -m esptool write_flash 0x260000 bleota-s3.bin
 	fi

bin/generate_ci_matrix.py

@@ -1,6 +1,6 @@
 #!/usr/bin/env python
 
-"""Generate the CI matrix"""
+"""Generate the CI matrix."""
 
 import configparser
 import json
@@ -34,5 +34,10 @@ for subdir, dirs, files in os.walk(rootdir):
                                     outlist.append(section)
                             else:
                                 outlist.append(section)
+                    if "board_check" in config[config[c].name]:
+                        if (config[config[c].name]["board_check"] == "true") & (
+                            "check" in options
+                        ):
+                            outlist.append(section)
 
 print(json.dumps(outlist))

bin/native-install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 
-cp release/meshtasticd_linux_arm64 /usr/sbin/meshtasticd
+cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd
 mkdir /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/platformio-custom.py

@@ -1,13 +1,14 @@
-import subprocess
-import configparser
-import traceback
+# trunk-ignore-all(ruff/F821)
+# trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
 from os.path import join
+
 from readprops import readProps
 
 Import("env")
 platform = env.PioPlatform()
 
+
 def esp32_create_combined_bin(source, target, env):
     # this sub is borrowed from ESPEasy build toolchain. It's licensed under GPL V3
     # https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
@@ -20,8 +21,8 @@ def esp32_create_combined_bin(source, target, env):
     firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
     chip = env.get("BOARD_MCU")
     flash_size = env.BoardConfig().get("upload.flash_size")
-    flash_freq = env.BoardConfig().get("build.f_flash", '40m')
-    flash_freq = flash_freq.replace('000000L', 'm')
+    flash_freq = env.BoardConfig().get("build.f_flash", "40m")
+    flash_freq = flash_freq.replace("000000L", "m")
     flash_mode = env.BoardConfig().get("build.flash_mode", "dio")
     memory_type = env.BoardConfig().get("build.arduino.memory_type", "qio_qspi")
     if flash_mode == "qio" or flash_mode == "qout":
@@ -51,23 +52,42 @@ def esp32_create_combined_bin(source, target, env):
     print(f" - {hex(app_offset)} | {firmware_name}")
     cmd += [hex(app_offset), firmware_name]
 
-    print('Using esptool.py arguments: %s' % ' '.join(cmd))
+    print("Using esptool.py arguments: %s" % " ".join(cmd))
 
     esptool.main(cmd)
 
-if (platform.name == "espressif32"):
+
+if platform.name == "espressif32":
     sys.path.append(join(platform.get_package_dir("tool-esptoolpy")))
     import esptool
+
     env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_combined_bin)
 
+    esp32_kind = env.GetProjectOption("custom_esp32_kind")
+    if esp32_kind == "esp32":
+        # Free up some IRAM by removing auxiliary SPI flash chip drivers.
+        # Wrapped stub symbols are defined in src/platform/esp32/iram-quirk.c.
+        env.Append(
+            LINKFLAGS=[
+                "-Wl,--wrap=esp_flash_chip_gd",
+                "-Wl,--wrap=esp_flash_chip_issi",
+                "-Wl,--wrap=esp_flash_chip_winbond",
+            ]
+        )
+    else:
+        # For newer ESP32 targets, using newlib nano works better.
+        env.Append(LINKFLAGS=["--specs=nano.specs", "-u", "_printf_float"])
+
 Import("projenv")
 
 prefsLoc = projenv["PROJECT_DIR"] + "/version.properties"
 verObj = readProps(prefsLoc)
-print("Using meshtastic platformio-custom.py, firmware version " + verObj['long'])
+print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"])
 
 # General options that are passed to the C and C++ compilers
-projenv.Append(CCFLAGS=[
-    "-DAPP_VERSION=" + verObj['long'],
-    "-DAPP_VERSION_SHORT=" + verObj['short']    
-])
+projenv.Append(
+    CCFLAGS=[
+        "-DAPP_VERSION=" + verObj["long"],
+        "-DAPP_VERSION_SHORT=" + verObj["short"],
+    ]
+)

bin/regen-protos.bat

@@ -1 +1 @@
-cd protobufs && ..\nanopb-0.4.7\generator-bin\protoc.exe --experimental_allow_proto3_optional --nanopb_out=-v:..\src\mesh\generated -I=..\protobufs ..\protobufs\meshtastic\*.proto
+cd protobufs && ..\nanopb-0.4.8\generator-bin\protoc.exe --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:..\src\mesh\generated" -I=..\protobufs\ ..\protobufs\meshtastic\*.proto

bin/regen-protos.sh

@@ -2,19 +2,10 @@
 
 set -e
 
-echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.7 to be located in the"
+echo "This script requires https://jpa.kapsi.fi/nanopb/download/ version 0.4.8 to be located in the"
 echo "firmware root directory if the following step fails, you should download the correct"
-echo "prebuilt binaries for your computer into nanopb-0.4.7"
+echo "prebuilt binaries for your computer into nanopb-0.4.8"
 
 # the nanopb tool seems to require that the .options file be in the current directory!
 cd protobufs
-../nanopb-0.4.7/generator-bin/protoc --nanopb_out=-v:../src/mesh/generated/ -I=../protobufs meshtastic/*.proto --experimental_allow_proto3_optional
-
-# cd ../src/mesh/generated/meshtastic
-# sed -i 's/#include "meshtastic/#include "./g' -- *
-
-# sed -i 's/meshtastic_//g' -- *
-
-#echo "Regenerating protobuf documentation - if you see an error message"
-#echo "you can ignore it unless doing a new protobuf release to github."
-#bin/regen-docs.sh
+../nanopb-0.4.8/generator-bin/protoc --experimental_allow_proto3_optional "--nanopb_out=-S.cpp -v:../src/mesh/generated/" -I=../protobufs meshtastic/*.proto

boards/CDEBYTE_EoRa-S3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D CDEBYTE_EORA_S3",
+      "-D ARDUINO_USB_CDC_ON_BOOT=1",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1",
+      "-D BOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "CDEBYTE_EoRa-S3"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "CDEBYTE EoRa-S3",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.cdebyte.com/Module-Testkits-EoRaPI",
+  "vendor": "CDEBYTE"
+}

boards/ESP32-S3-WROOM-1-N4.json

@@ -0,0 +1,39 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-D ARDUINO_USB_CDC_ON_BOOT=0",
+      "-D ARDUINO_USB_MSC_ON_BOOT=0",
+      "-D ARDUINO_USB_DFU_ON_BOOT=0",
+      "-D ARDUINO_USB_MODE=0",
+      "-D ARDUINO_RUNNING_CORE=1",
+      "-D ARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "ESP32-S3-WROOM-1-N4"
+  },
+  "connectivity": ["wifi"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "ESP32-S3-WROOM-1-N4 (4 MB Flash, No PSRAM)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 524288,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf",
+  "vendor": "Espressif"
+}

boards/canaryone.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_CANARY -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x009F"]
+    ],
+    "usb_product": "CanaryOne",
+    "mcu": "nrf52840",
+    "variant": "canaryone",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Canary (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://canaryradio.io/",
+  "vendor": "Canary Radio Company"
+}

boards/eink0.1.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "TTGO eink (Adafruit BSP)",

boards/esp32-s3-pico.json

@@ -0,0 +1,40 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_USB_MODE=1",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Waveshare ESP32-S3-Pico (16 MB FLASH, 2 MB PSRAM)",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.waveshare.com/esp32-s3-pico.htm",
+  "vendor": "Waveshare"
+}

boards/lora-relay-v1.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",

boards/lora-relay-v2.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Meshtastic Lora Relay V1 (Adafruit BSP)",

boards/lora_isp4520.json

@@ -22,7 +22,8 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd"
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "lora ISP4520",

boards/nordic_pca10059.json

@@ -32,7 +32,8 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "nRF52840 Dongle",

boards/nrf52840_dk.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "A modified NRF52840-DK devboard (Adafruit BSP)",

boards/nrf52840_dk_modified.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "A modified NRF52840-DK devboard (Adafruit BSP)",

boards/ppr.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Meshtastic PPR (Adafruit BSP)",

boards/ppr1.json

@@ -29,7 +29,8 @@
   "debug": {
     "jlink_device": "nRF52833_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52833.svd"
+    "svd_path": "nrf52833.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Meshtastic PPR1 (Adafruit BSP)",

boards/promicro-nrf52840.json

@@ -0,0 +1,52 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x00B3"],
+      ["0x239A", "0x8029"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"],
+      ["0x239A", "0x802A"]
+    ],
+    "usb_product": "ProMicro compatible nRF52840",
+    "mcu": "nrf52840",
+    "variant": "promicro_diy",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "svd_path": "nrf52840.svd"
+  },
+  "frameworks": ["arduino"],
+  "name": "ProMicro compatible nRF52840",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["nrfutil", "jlink", "nrfjprog", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "https://www.nologo.tech/product/otherboard/NRF52840.html",
+  "vendor": "Nologo"
+}

boards/station-g2.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=0"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "station-g2"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "BQ Station G2",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://wiki.uniteng.com/en/meshtastic/station-g2",
+  "vendor": "BQ Consulting"
+}

boards/t-echo.json

@@ -9,6 +9,7 @@
     "f_cpu": "64000000L",
     "hwids": [
       ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
       ["0x239A", "0x002A"]
     ],
     "usb_product": "TTGO_eink",
@@ -32,7 +33,8 @@
   "debug": {
     "jlink_device": "nRF52840_xxAA",
     "onboard_tools": ["jlink"],
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "TTGO eink (Adafruit BSP)",

boards/t-watch-s3.json

@@ -16,7 +16,10 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
     "mcu": "esp32s3",
     "variant": "t-watch-s3"
   },

boards/wiphone.json

@@ -0,0 +1,34 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32_out.ld",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_WIPHONE14",
+      "-DBOARD_HAS_PSRAM",
+      "-mfix-esp32-psram-cache-issue",
+      "-mfix-esp32-psram-cache-strategy=memw"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "wiphone",
+    "board": "WiPhone"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "frameworks": ["arduino", "espidf"],
+  "name": "WIPhone Integrated 1.4",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 532480,
+    "maximum_size": 6553600,
+    "maximum_data_size": 4521984,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://www.wiphone.io/",
+  "vendor": "HackEDA"
+}

boards/wiscore_rak11200.json

@@ -4,7 +4,7 @@
       "ldscript": "esp32_out.ld"
     },
     "core": "esp32",
-    "extra_flags": "-DARDUINO_ESP32_DEV",
+    "extra_flags": ["-DBOARD_HAS_PSRAM", "-DARDUINO_ESP32_DEV"],
     "f_cpu": "240000000L",
     "f_flash": "40000000L",
     "flash_mode": "dio",

boards/wiscore_rak4600.json

@@ -32,7 +32,8 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52832_xxAA",
-    "svd_path": "nrf52.svd"
+    "svd_path": "nrf52.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino", "zephyr"],
   "name": "Adafruit Bluefruit nRF52832 Feather",

boards/wiscore_rak4631.json

@@ -32,7 +32,8 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "WisCore RAK4631 Board",

boards/xiao_ble_sense.json

@@ -31,7 +31,8 @@
   "connectivity": ["bluetooth"],
   "debug": {
     "jlink_device": "nRF52840_xxAA",
-    "svd_path": "nrf52840.svd"
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
   },
   "frameworks": ["arduino"],
   "name": "Seeed Xiao BLE Sense",

platformio.ini

@@ -10,13 +10,16 @@ default_envs = tbeam
 ;default_envs = heltec-v2_0
 ;default_envs = heltec-v2_1
 ;default_envs = heltec-wireless-tracker
+;default_envs = chatter2
 ;default_envs = tlora-v1
 ;default_envs = tlora_v1_3
 ;default_envs = tlora-v2
 ;default_envs = tlora-v2-1-1_6
+;default_envs = tlora-v2-1-1_6-tcxo
 ;default_envs = tlora-t3s3-v1
 ;default_envs = lora-relay-v1 # nrf board
 ;default_envs = t-echo
+;default_envs = canaryone
 ;default_envs = nrf52840dk-geeksville
 ;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
 ;default_envs = nano-g1
@@ -51,9 +54,11 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_NRF24
   -DRADIOLIB_EXCLUDE_RF69
   -DRADIOLIB_EXCLUDE_SX1231
+  -DRADIOLIB_EXCLUDE_SX1233
   -DRADIOLIB_EXCLUDE_SI443X
   -DRADIOLIB_EXCLUDE_RFM2X
   -DRADIOLIB_EXCLUDE_AFSK
+  -DRADIOLIB_EXCLUDE_BELL
   -DRADIOLIB_EXCLUDE_HELLSCHREIBER
   -DRADIOLIB_EXCLUDE_MORSE
   -DRADIOLIB_EXCLUDE_RTTY
@@ -64,17 +69,18 @@ build_flags = -Wno-missing-field-initializers
   -DRADIOLIB_EXCLUDE_PAGER
   -DRADIOLIB_EXCLUDE_FSK4
   -DRADIOLIB_EXCLUDE_APRS
+  -DRADIOLIB_EXCLUDE_LORAWAN
 
 monitor_speed = 115200
 
 lib_deps =
-  jgromes/RadioLib@^6.3.0
-  https://github.com/meshtastic/esp8266-oled-ssd1306.git#b38094e03dfa964fbc0e799bc374e91a605c1223 ; ESP8266_SSD1306
+  jgromes/RadioLib@~6.5.0
+  https://github.com/meshtastic/esp8266-oled-ssd1306.git#ee628ee6c9588d4c56c9e3da35f0fc9448ad54a8 ; ESP8266_SSD1306
   mathertel/OneButton@^2.5.0 ; OneButton library for non-blocking button debounce
   https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159
-  https://github.com/meshtastic/TinyGPSPlus.git#076e8d2c8fb702d9be5b08c55b93ff76f8af7e61
-  https://github.com/meshtastic/ArduinoThread.git#72921ac222eed6f526ba1682023cee290d9aa1b3
-  nanopb/Nanopb@^0.4.7
+  https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4
+  https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0
+  nanopb/Nanopb@^0.4.8
   erriez/ErriezCRC32@^1.0.1
 
 ; Used for the code analysis in PIO Home / Inspect
@@ -90,7 +96,6 @@ check_flags =
 framework = arduino
 lib_deps =
   ${env.lib_deps}
-  mprograms/QMC5883LCompass@^1.2.0
   end2endzone/NonBlockingRTTTL@^1.3.0
   https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da
 
@@ -108,14 +113,15 @@ lib_deps =
 ; (not included in native / portduino)
 [environmental_base]
 lib_deps =
-  adafruit/Adafruit BusIO@^1.11.4
+  adafruit/Adafruit BusIO@^1.15.0
   adafruit/Adafruit Unified Sensor@^1.1.11
   adafruit/Adafruit BMP280 Library@^2.6.8
+  adafruit/Adafruit BMP085 Library@^1.2.4
   adafruit/Adafruit BME280 Library@^2.2.2
-  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.5.2400
+  https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502
   boschsensortec/BME68x Sensor Library@^1.1.40407
   adafruit/Adafruit MCP9808 Library@^2.0.0
-  https://github.com/Tinyu-Zhao/INA3221@^0.0.1
+  https://github.com/KodinLanewave/INA3221@^1.0.0
   adafruit/Adafruit INA260 Library@^1.5.0
   adafruit/Adafruit INA219@^1.2.0
   adafruit/Adafruit SHTC3 Library@^1.0.0
@@ -124,4 +130,9 @@ lib_deps =
   adafruit/Adafruit PM25 AQI Sensor@^1.0.6
   adafruit/Adafruit MPU6050@^2.2.4
   adafruit/Adafruit LIS3DH@^1.2.4
-  https://github.com/lewisxhe/BMA423_Library@^0.0.1
+  adafruit/Adafruit AHTX0@^2.0.5
+  lewisxhe/SensorLib@^0.2.0
+  adafruit/Adafruit LSM6DS@^4.7.2
+  mprograms/QMC5883LCompass@^1.2.0
+  adafruit/Adafruit VEML7700 Library@^2.1.6
+  adafruit/Adafruit SHT4x Library@^1.0.4

src/AccelerometerThread.h

@@ -1,22 +1,24 @@
+#pragma once
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
 #include "PowerFSM.h"
 #include "concurrency/OSThread.h"
-#include "configuration.h"
 #include "main.h"
 #include "power.h"
 
 #include <Adafruit_LIS3DH.h>
+#include <Adafruit_LSM6DS3TRC.h>
 #include <Adafruit_MPU6050.h>
 #include <Arduino.h>
+#include <SensorBMA423.hpp>
 #include <Wire.h>
-#include <bma.h>
-
-BMA423 bmaSensor;
-bool BMA_IRQ = false;
 
 #define ACCELEROMETER_CHECK_INTERVAL_MS 100
 #define ACCELEROMETER_CLICK_THRESHOLD 40
 
-uint16_t readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+static inline int readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
 {
     Wire.beginTransmission(address);
     Wire.write(reg);
@@ -29,7 +31,7 @@ uint16_t readRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
     return 0; // Pass
 }
 
-uint16_t writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len)
+static inline int writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint8_t len)
 {
     Wire.beginTransmission(address);
     Wire.write(reg);
@@ -37,8 +39,6 @@ uint16_t writeRegister(uint8_t address, uint8_t reg, uint8_t *data, uint16_t len
     return (0 != Wire.endTransmission());
 }
 
-namespace concurrency
-{
 class AccelerometerThread : public concurrency::OSThread
 {
   public:
@@ -49,81 +49,22 @@ class AccelerometerThread : public concurrency::OSThread
             disable();
             return;
         }
+        acceleremoter_type = type;
 
         if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
             LOG_DEBUG("AccelerometerThread disabling due to no interested configurations\n");
             disable();
             return;
         }
-
-        acceleremoter_type = type;
-        LOG_DEBUG("AccelerometerThread initializing\n");
-
-        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
-            LOG_DEBUG("MPU6050 initializing\n");
-            // setup motion detection
-            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
-            mpu.setMotionDetectionThreshold(1);
-            mpu.setMotionDetectionDuration(20);
-            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
-            mpu.setInterruptPinPolarity(true);
-        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
-            LOG_DEBUG("LIS3DH initializing\n");
-            lis.setRange(LIS3DH_RANGE_2_G);
-            // Adjust threshold, higher numbers are less sensitive
-            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
-        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.begin(readRegister, writeRegister, delay)) {
-            LOG_DEBUG("BMA423 initializing\n");
-            Acfg cfg;
-            cfg.odr = BMA4_OUTPUT_DATA_RATE_100HZ;
-            cfg.range = BMA4_ACCEL_RANGE_2G;
-            cfg.bandwidth = BMA4_ACCEL_NORMAL_AVG4;
-            cfg.perf_mode = BMA4_CONTINUOUS_MODE;
-            bmaSensor.setAccelConfig(cfg);
-            bmaSensor.enableAccel();
-
-            struct bma4_int_pin_config pin_config;
-            pin_config.edge_ctrl = BMA4_LEVEL_TRIGGER;
-            pin_config.lvl = BMA4_ACTIVE_HIGH;
-            pin_config.od = BMA4_PUSH_PULL;
-            pin_config.output_en = BMA4_OUTPUT_ENABLE;
-            pin_config.input_en = BMA4_INPUT_DISABLE;
-            // The correct trigger interrupt needs to be configured as needed
-            bmaSensor.setINTPinConfig(pin_config, BMA4_INTR1_MAP);
-
-#ifdef BMA423_INT
-            pinMode(BMA4XX_INT, INPUT);
-            attachInterrupt(
-                BMA4XX_INT,
-                [] {
-                    // Set interrupt to set irq value to true
-                    BMA_IRQ = true;
-                },
-                RISING); // Select the interrupt mode according to the actual circuit
-#endif
-
-            struct bma423_axes_remap remap_data;
-            remap_data.x_axis = 0;
-            remap_data.x_axis_sign = 1;
-            remap_data.y_axis = 1;
-            remap_data.y_axis_sign = 0;
-            remap_data.z_axis = 2;
-            remap_data.z_axis_sign = 1;
-            // Need to raise the wrist function, need to set the correct axis
-            bmaSensor.setRemapAxes(&remap_data);
-            // sensor.enableFeature(BMA423_STEP_CNTR, true);
-            bmaSensor.enableFeature(BMA423_TILT, true);
-            bmaSensor.enableFeature(BMA423_WAKEUP, true);
-            // sensor.resetStepCounter();
-
-            // Turn on feature interrupt
-            bmaSensor.enableStepCountInterrupt();
-            bmaSensor.enableTiltInterrupt();
-            // It corresponds to isDoubleClick interrupt
-            bmaSensor.enableWakeupInterrupt();
-        }
+        init();
     }
 
+    void start()
+    {
+        init();
+        setIntervalFromNow(0);
+    };
+
   protected:
     int32_t runOnce() override
     {
@@ -141,17 +82,84 @@ class AccelerometerThread : public concurrency::OSThread
                 buttonPress();
                 return 500;
             }
-        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.getINT()) {
-            if (bmaSensor.isTilt() || bmaSensor.isDoubleClick()) {
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 && bmaSensor.readIrqStatus() != DEV_WIRE_NONE) {
+            if (bmaSensor.isTilt() || bmaSensor.isDoubleTap()) {
                 wakeScreen();
                 return 500;
             }
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.shake()) {
+            wakeScreen();
+            return 500;
         }
 
         return ACCELEROMETER_CHECK_INTERVAL_MS;
     }
 
   private:
+    void init()
+    {
+        LOG_DEBUG("AccelerometerThread initializing\n");
+
+        if (acceleremoter_type == ScanI2C::DeviceType::MPU6050 && mpu.begin(accelerometer_found.address)) {
+            LOG_DEBUG("MPU6050 initializing\n");
+            // setup motion detection
+            mpu.setHighPassFilter(MPU6050_HIGHPASS_0_63_HZ);
+            mpu.setMotionDetectionThreshold(1);
+            mpu.setMotionDetectionDuration(20);
+            mpu.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
+            mpu.setInterruptPinPolarity(true);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LIS3DH && lis.begin(accelerometer_found.address)) {
+            LOG_DEBUG("LIS3DH initializing\n");
+            lis.setRange(LIS3DH_RANGE_2_G);
+            // Adjust threshold, higher numbers are less sensitive
+            lis.setClick(config.device.double_tap_as_button_press ? 2 : 1, ACCELEROMETER_CLICK_THRESHOLD);
+        } else if (acceleremoter_type == ScanI2C::DeviceType::BMA423 &&
+                   bmaSensor.begin(accelerometer_found.address, &readRegister, &writeRegister)) {
+            LOG_DEBUG("BMA423 initializing\n");
+            bmaSensor.configAccelerometer(bmaSensor.RANGE_2G, bmaSensor.ODR_100HZ, bmaSensor.BW_NORMAL_AVG4,
+                                          bmaSensor.PERF_CONTINUOUS_MODE);
+            bmaSensor.enableAccelerometer();
+            bmaSensor.configInterrupt(BMA4_LEVEL_TRIGGER, BMA4_ACTIVE_HIGH, BMA4_PUSH_PULL, BMA4_OUTPUT_ENABLE,
+                                      BMA4_INPUT_DISABLE);
+
+#ifdef BMA423_INT
+            pinMode(BMA4XX_INT, INPUT);
+            attachInterrupt(
+                BMA4XX_INT,
+                [] {
+                    // Set interrupt to set irq value to true
+                    BMA_IRQ = true;
+                },
+                RISING); // Select the interrupt mode according to the actual circuit
+#endif
+
+#ifdef T_WATCH_S3
+            // Need to raise the wrist function, need to set the correct axis
+            bmaSensor.setReampAxes(bmaSensor.REMAP_TOP_LAYER_RIGHT_CORNER);
+#else
+            bmaSensor.setReampAxes(bmaSensor.REMAP_BOTTOM_LAYER_BOTTOM_LEFT_CORNER);
+#endif
+            // bmaSensor.enableFeature(bmaSensor.FEATURE_STEP_CNTR, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_TILT, true);
+            bmaSensor.enableFeature(bmaSensor.FEATURE_WAKEUP, true);
+            // bmaSensor.resetPedometer();
+
+            // Turn on feature interrupt
+            bmaSensor.enablePedometerIRQ();
+            bmaSensor.enableTiltIRQ();
+            // It corresponds to isDoubleClick interrupt
+            bmaSensor.enableWakeupIRQ();
+        } else if (acceleremoter_type == ScanI2C::DeviceType::LSM6DS3 && lsm.begin_I2C(accelerometer_found.address)) {
+            LOG_DEBUG("LSM6DS3 initializing\n");
+            // Default threshold of 2G, less sensitive options are 4, 8 or 16G
+            lsm.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
+#ifndef LSM6DS3_WAKE_THRESH
+#define LSM6DS3_WAKE_THRESH 20
+#endif
+            lsm.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
+            // Duration is number of occurances needed to trigger, higher threshold is less sensitive
+        }
+    }
     void wakeScreen()
     {
         if (powerFSM.getState() == &stateDARK) {
@@ -169,6 +177,9 @@ class AccelerometerThread : public concurrency::OSThread
     ScanI2C::DeviceType acceleremoter_type;
     Adafruit_MPU6050 mpu;
     Adafruit_LIS3DH lis;
+    Adafruit_LSM6DS3TRC lsm;
+    SensorBMA423 bmaSensor;
+    bool BMA_IRQ = false;
 };
 
-} // namespace concurrency
+#endif

src/AmbientLightingThread.h

@@ -5,6 +5,16 @@
 NCP5623 rgb;
 #endif
 
+#ifdef HAS_NEOPIXEL
+#include <graphics/NeoPixel.h>
+Adafruit_NeoPixel pixels(NEOPIXEL_COUNT, NEOPIXEL_DATA, NEOPIXEL_TYPE);
+#endif
+
+#ifdef UNPHONE
+#include "unPhone.h"
+extern unPhone unphone;
+#endif
+
 namespace concurrency
 {
 class AmbientLightingThread : public concurrency::OSThread
@@ -27,15 +37,31 @@ class AmbientLightingThread : public concurrency::OSThread
             disable();
             return;
         }
+#endif
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
         if (!moduleConfig.ambient_lighting.led_state) {
             LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF\n");
             disable();
             return;
         }
         LOG_DEBUG("AmbientLightingThread initializing\n");
+#ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623) {
             rgb.begin();
+#endif
+#ifdef RGBLED_RED
+            pinMode(RGBLED_RED, OUTPUT);
+            pinMode(RGBLED_GREEN, OUTPUT);
+            pinMode(RGBLED_BLUE, OUTPUT);
+#endif
+#ifdef HAS_NEOPIXEL
+            pixels.begin(); // Initialise the pixel(s)
+            pixels.clear(); // Set all pixel colors to 'off'
+            pixels.setBrightness(moduleConfig.ambient_lighting.current);
+#endif
             setLighting();
+#endif
+#ifdef HAS_NCP5623
         }
 #endif
     }
@@ -43,16 +69,17 @@ class AmbientLightingThread : public concurrency::OSThread
   protected:
     int32_t runOnce() override
     {
+#if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
 #ifdef HAS_NCP5623
         if (_type == ScanI2C::NCP5623 && moduleConfig.ambient_lighting.led_state) {
+#endif
             setLighting();
             return 30000; // 30 seconds to reset from any animations that may have been running from Ext. Notification
-        } else {
-            return disable();
+#ifdef HAS_NCP5623
         }
-#else
-        return disable();
 #endif
+#endif
+        return disable();
     }
 
   private:
@@ -65,9 +92,36 @@ class AmbientLightingThread : public concurrency::OSThread
         rgb.setRed(moduleConfig.ambient_lighting.red);
         rgb.setGreen(moduleConfig.ambient_lighting.green);
         rgb.setBlue(moduleConfig.ambient_lighting.blue);
-        LOG_DEBUG("Initializing Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
+        LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d\n",
                   moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
                   moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef HAS_NEOPIXEL
+        pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                                 moduleConfig.ambient_lighting.blue),
+                    0, NEOPIXEL_COUNT);
+        pixels.show();
+        LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green,
+                  moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef RGBLED_CA
+        analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#elif defined(RGBLED_RED)
+        analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red);
+        analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green);
+        analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d\n",
+                  moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+#endif
+#ifdef UNPHONE
+        unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
+        LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d\n", moduleConfig.ambient_lighting.red,
+                  moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue);
 #endif
     }
 };

src/ButtonThread.cpp

@@ -0,0 +1,321 @@
+#include "ButtonThread.h"
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_GPS
+#include "GPS.h"
+#endif
+#include "MeshService.h"
+#include "PowerFSM.h"
+#include "RadioLibInterface.h"
+#include "buzz.h"
+#include "main.h"
+#include "modules/ExternalNotificationModule.h"
+#include "power.h"
+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
+#define DEBUG_BUTTONS 0
+#if DEBUG_BUTTONS
+#define LOG_BUTTON(...) LOG_DEBUG(__VA_ARGS__)
+#else
+#define LOG_BUTTON(...)
+#endif
+
+using namespace concurrency;
+
+ButtonThread *buttonThread; // Declared extern in header
+volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE;
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+OneButton ButtonThread::userButton; // Get reference to static member
+#endif
+
+ButtonThread::ButtonThread() : OSThread("Button")
+{
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
+        this->userButton = OneButton(settingsMap[user], true, true);
+        LOG_DEBUG("Using GPIO%02d for button\n", settingsMap[user]);
+    }
+#elif defined(BUTTON_PIN)
+    int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin
+    this->userButton = OneButton(pin, true, true);
+    LOG_DEBUG("Using GPIO%02d for button\n", pin);
+#endif
+
+#ifdef INPUT_PULLUP_SENSE
+    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
+    pinMode(pin, INPUT_PULLUP_SENSE);
+#endif
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+    userButton.attachClick(userButtonPressed);
+    userButton.setClickMs(BUTTON_CLICK_MS);
+    userButton.setPressMs(BUTTON_LONGPRESS_MS);
+    userButton.setDebounceMs(1);
+    userButton.attachDoubleClick(userButtonDoublePressed);
+    userButton.attachMultiClick(userButtonMultiPressed, this); // Reference to instance: get click count from non-static OneButton
+#ifndef T_DECK // T-Deck immediately wakes up after shutdown, so disable this function
+    userButton.attachLongPressStart(userButtonPressedLongStart);
+    userButton.attachLongPressStop(userButtonPressedLongStop);
+#endif
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
+#ifdef INPUT_PULLUP_SENSE
+    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
+    pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
+#endif
+    userButtonAlt.attachClick(userButtonPressed);
+    userButtonAlt.setClickMs(BUTTON_CLICK_MS);
+    userButtonAlt.setPressMs(BUTTON_LONGPRESS_MS);
+    userButtonAlt.setDebounceMs(1);
+    userButtonAlt.attachDoubleClick(userButtonDoublePressed);
+    userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
+    userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
+    userButtonTouch.setPressMs(BUTTON_TOUCH_MS);
+    userButtonTouch.attachLongPressStart(touchPressedLongStart); // Better handling with longpress than click?
+#endif
+
+    attachButtonInterrupts();
+#endif
+}
+
+int32_t ButtonThread::runOnce()
+{
+    // If the button is pressed we suppress CPU sleep until release
+    canSleep = true; // Assume we should not keep the board awake
+
+#if defined(BUTTON_PIN)
+    userButton.tick();
+    canSleep &= userButton.isIdle();
+#elif defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
+        userButton.tick();
+        canSleep &= userButton.isIdle();
+    }
+#endif
+#ifdef BUTTON_PIN_ALT
+    userButtonAlt.tick();
+    canSleep &= userButtonAlt.isIdle();
+#endif
+#ifdef BUTTON_PIN_TOUCH
+    userButtonTouch.tick();
+    canSleep &= userButtonTouch.isIdle();
+#endif
+
+    if (btnEvent != BUTTON_EVENT_NONE) {
+        switch (btnEvent) {
+        case BUTTON_EVENT_PRESSED: {
+            LOG_BUTTON("press!\n");
+#ifdef BUTTON_PIN
+            if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
+                 moduleConfig.canned_message.inputbroker_pin_press) ||
+                !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
+            }
+#endif
+#if defined(ARCH_PORTDUINO)
+            if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
+                    (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
+                !moduleConfig.canned_message.enabled) {
+                powerFSM.trigger(EVENT_PRESS);
+            }
+#endif
+            break;
+        }
+
+        case BUTTON_EVENT_DOUBLE_PRESSED: {
+            LOG_BUTTON("Double press!\n");
+            service.refreshLocalMeshNode();
+            auto sentPosition = service.trySendPosition(NODENUM_BROADCAST, true);
+            if (screen) {
+                if (sentPosition)
+                    screen->print("Sent ad-hoc position\n");
+                else
+                    screen->print("Sent ad-hoc nodeinfo\n");
+                screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+            }
+            break;
+        }
+
+        case BUTTON_EVENT_MULTI_PRESSED: {
+            LOG_BUTTON("Mulitipress! %hux\n", multipressClickCount);
+            switch (multipressClickCount) {
+#if HAS_GPS
+            // 3 clicks: toggle GPS
+            case 3:
+                if (!config.device.disable_triple_click && (gps != nullptr)) {
+                    gps->toggleGpsMode();
+                    if (screen)
+                        screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+                }
+                break;
+#endif
+#if defined(USE_EINK) && defined(PIN_EINK_EN) // i.e. T-Echo
+            // 4 clicks: toggle backlight
+            case 4:
+                digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
+                break;
+#endif
+            // No valid multipress action
+            default:
+                break;
+            } // end switch: click count
+
+            break;
+        } // end multipress event
+
+        case BUTTON_EVENT_LONG_PRESSED: {
+            LOG_BUTTON("Long press!\n");
+            powerFSM.trigger(EVENT_PRESS);
+            if (screen)
+                screen->startShutdownScreen();
+            playBeep();
+            break;
+        }
+
+        // Do actual shutdown when button released, otherwise the button release
+        // may wake the board immediatedly.
+        case BUTTON_EVENT_LONG_RELEASED: {
+            LOG_INFO("Shutdown from long press\n");
+            playShutdownMelody();
+            delay(3000);
+            power->shutdown();
+            break;
+        }
+
+#ifdef BUTTON_PIN_TOUCH
+        case BUTTON_EVENT_TOUCH_LONG_PRESSED: {
+            LOG_BUTTON("Touch press!\n");
+            if (screen) {
+                // Wake if asleep
+                if (powerFSM.getState() == &stateDARK)
+                    powerFSM.trigger(EVENT_PRESS);
+
+                // Update display (legacy behaviour)
+                screen->forceDisplay();
+            }
+            break;
+        }
+#endif // BUTTON_PIN_TOUCH
+
+        default:
+            break;
+        }
+        btnEvent = BUTTON_EVENT_NONE;
+    }
+
+    runASAP = false;
+    return 50;
+}
+
+/*
+ * Attach (or re-attach) hardware interrupts for buttons
+ * Public method. Used outside class when waking from MCU sleep
+ */
+void ButtonThread::attachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        wakeOnIrq(settingsMap[user], FALLING);
+#elif defined(BUTTON_PIN)
+    // Interrupt for user button, during normal use. Improves responsiveness.
+    attachInterrupt(
+        config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN,
+        []() {
+            BaseType_t higherWake = 0;
+            mainDelay.interruptFromISR(&higherWake);
+            ButtonThread::userButton.tick();
+            runASAP = true;
+        },
+        CHANGE);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    wakeOnIrq(BUTTON_PIN_ALT, FALLING);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
+#endif
+}
+
+/*
+ * Detach the "normal" button interrupts.
+ * Public method. Used before attaching a "wake-on-button" interrupt for MCU sleep
+ */
+void ButtonThread::detachButtonInterrupts()
+{
+#if defined(ARCH_PORTDUINO)
+    if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
+        detachInterrupt(settingsMap[user]);
+#elif defined(BUTTON_PIN)
+    detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
+#endif
+
+#ifdef BUTTON_PIN_ALT
+    detachInterrupt(BUTTON_PIN_ALT);
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    detachInterrupt(BUTTON_PIN_TOUCH);
+#endif
+}
+
+/**
+ * Watch a GPIO and if we get an IRQ, wake the main thread.
+ * Use to add wake on button press
+ */
+void ButtonThread::wakeOnIrq(int irq, int mode)
+{
+    attachInterrupt(
+        irq,
+        [] {
+            BaseType_t higherWake = 0;
+            mainDelay.interruptFromISR(&higherWake);
+            runASAP = true;
+        },
+        FALLING);
+}
+
+// Static callback
+void ButtonThread::userButtonMultiPressed(void *callerThread)
+{
+    // Grab click count from non-static button, while the info is still valid
+    ButtonThread *thread = (ButtonThread *)callerThread;
+    thread->storeClickCount();
+
+    // Then handle later, in the usual way
+    btnEvent = BUTTON_EVENT_MULTI_PRESSED;
+}
+
+// Non-static method, runs during callback. Grabs info while still valid
+void ButtonThread::storeClickCount()
+{
+#ifdef BUTTON_PIN
+    multipressClickCount = userButton.getNumberClicks();
+#endif
+}
+
+void ButtonThread::userButtonPressedLongStart()
+{
+    if (millis() > c_holdOffTime) {
+        btnEvent = BUTTON_EVENT_LONG_PRESSED;
+    }
+}
+
+void ButtonThread::userButtonPressedLongStop()
+{
+    if (millis() > c_holdOffTime) {
+        btnEvent = BUTTON_EVENT_LONG_RELEASED;
+    }
+}

src/ButtonThread.h

@@ -1,36 +1,45 @@
-#include "PowerFSM.h"
-#include "RadioLibInterface.h"
-#include "buzz.h"
+#pragma once
+
+#include "OneButton.h"
 #include "concurrency/OSThread.h"
 #include "configuration.h"
-#include "graphics/Screen.h"
-#include "main.h"
-#include "modules/ExternalNotificationModule.h"
-#include "power.h"
-#include <OneButton.h>
 
-namespace concurrency
-{
-/**
- * Watch a GPIO and if we get an IRQ, wake the main thread.
- * Use to add wake on button press
- */
-void wakeOnIrq(int irq, int mode)
-{
-    attachInterrupt(
-        irq,
-        [] {
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-        },
-        FALLING);
-}
+#ifndef BUTTON_CLICK_MS
+#define BUTTON_CLICK_MS 250
+#endif
+
+#ifndef BUTTON_LONGPRESS_MS
+#define BUTTON_LONGPRESS_MS 5000
+#endif
+
+#ifndef BUTTON_TOUCH_MS
+#define BUTTON_TOCH_MS 400
+#endif
 
 class ButtonThread : public concurrency::OSThread
 {
-// Prepare for button presses
-#ifdef BUTTON_PIN
-    OneButton userButton;
+  public:
+    static const uint32_t c_holdOffTime = 30000; // hold off 30s after boot
+
+    enum ButtonEventType {
+        BUTTON_EVENT_NONE,
+        BUTTON_EVENT_PRESSED,
+        BUTTON_EVENT_DOUBLE_PRESSED,
+        BUTTON_EVENT_MULTI_PRESSED,
+        BUTTON_EVENT_LONG_PRESSED,
+        BUTTON_EVENT_LONG_RELEASED,
+        BUTTON_EVENT_TOUCH_LONG_PRESSED,
+    };
+
+    ButtonThread();
+    int32_t runOnce() override;
+    void attachButtonInterrupts();
+    void detachButtonInterrupts();
+    void storeClickCount();
+
+  private:
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+    static OneButton userButton; // Static - accessed from an interrupt
 #endif
 #ifdef BUTTON_PIN_ALT
     OneButton userButtonAlt;
@@ -38,199 +47,22 @@ class ButtonThread : public concurrency::OSThread
 #ifdef BUTTON_PIN_TOUCH
     OneButton userButtonTouch;
 #endif
-#if defined(ARCH_RASPBERRY_PI)
-    OneButton userButton;
-#endif
-    static bool shutdown_on_long_stop;
 
-  public:
-    static uint32_t longPressTime;
+    // set during IRQ
+    static volatile ButtonEventType btnEvent;
 
-    // callback returns the period for the next callback invocation (or 0 if we should no longer be called)
-    ButtonThread() : OSThread("Button")
-    {
-#if defined(ARCH_RASPBERRY_PI) || defined(BUTTON_PIN)
-#if defined(ARCH_RASPBERRY_PI)
-        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
-            userButton = OneButton(settingsMap[user], true, true);
-#elif defined(BUTTON_PIN)
+    // Store click count during callback, for later use
+    volatile int multipressClickCount = 0;
 
-        userButton = OneButton(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, true, true);
-#endif
-#ifdef INPUT_PULLUP_SENSE
-        // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP_SENSE);
-#endif
-        userButton.attachClick(userButtonPressed);
-        userButton.setClickMs(300);
-        userButton.attachDuringLongPress(userButtonPressedLong);
-        userButton.attachDoubleClick(userButtonDoublePressed);
-        userButton.attachMultiClick(userButtonMultiPressed);
-        userButton.attachLongPressStart(userButtonPressedLongStart);
-        userButton.attachLongPressStop(userButtonPressedLongStop);
-#if defined(ARCH_RASPBERRY_PI)
-        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC)
-            wakeOnIrq(settingsMap[user], FALLING);
-#else
-        wakeOnIrq(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, FALLING);
-#endif
-#endif
-#ifdef BUTTON_PIN_ALT
-        userButtonAlt = OneButton(BUTTON_PIN_ALT, true, true);
-#ifdef INPUT_PULLUP_SENSE
-        // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-        pinMode(BUTTON_PIN_ALT, INPUT_PULLUP_SENSE);
-#endif
-        userButtonAlt.attachClick(userButtonPressed);
-        userButtonAlt.attachDuringLongPress(userButtonPressedLong);
-        userButtonAlt.attachDoubleClick(userButtonDoublePressed);
-        userButtonAlt.attachLongPressStart(userButtonPressedLongStart);
-        userButtonAlt.attachLongPressStop(userButtonPressedLongStop);
-        wakeOnIrq(BUTTON_PIN_ALT, FALLING);
-#endif
+    static void wakeOnIrq(int irq, int mode);
 
-#ifdef BUTTON_PIN_TOUCH
-        userButtonTouch = OneButton(BUTTON_PIN_TOUCH, true, true);
-        userButtonTouch.attachClick(touchPressed);
-        wakeOnIrq(BUTTON_PIN_TOUCH, FALLING);
-#endif
-    }
-
-  protected:
-    /// If the button is pressed we suppress CPU sleep until release
-    int32_t runOnce() override
-    {
-        canSleep = true; // Assume we should not keep the board awake
-
-#if defined(BUTTON_PIN)
-        userButton.tick();
-        canSleep &= userButton.isIdle();
-#elif defined(ARCH_RASPBERRY_PI)
-        if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) {
-            userButton.tick();
-            canSleep &= userButton.isIdle();
-        }
-#endif
-#ifdef BUTTON_PIN_ALT
-        userButtonAlt.tick();
-        canSleep &= userButtonAlt.isIdle();
-#endif
-#ifdef BUTTON_PIN_TOUCH
-        userButtonTouch.tick();
-        canSleep &= userButtonTouch.isIdle();
-#endif
-        // if (!canSleep) LOG_DEBUG("Suppressing sleep!\n");
-        // else LOG_DEBUG("sleep ok\n");
-
-        return 50;
-    }
-
-  private:
-    static void touchPressed()
-    {
-        screen->forceDisplay();
-        LOG_DEBUG("touch press!\n");
-    }
-
-    static void userButtonPressed()
-    {
-        // LOG_DEBUG("press!\n");
-#ifdef BUTTON_PIN
-        if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
-             moduleConfig.canned_message.inputbroker_pin_press) ||
-            !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) ||
-            !moduleConfig.canned_message.enabled) {
-            powerFSM.trigger(EVENT_PRESS);
-        }
-#endif
-#if defined(ARCH_RASPBERRY_PI)
-        if ((settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) &&
-                (settingsMap[user] != moduleConfig.canned_message.inputbroker_pin_press) ||
-            !moduleConfig.canned_message.enabled) {
-            powerFSM.trigger(EVENT_PRESS);
-        }
-#endif
-    }
-    static void userButtonPressedLong()
-    {
-        // LOG_DEBUG("Long press!\n");
-        // If user button is held down for 5 seconds, shutdown the device.
-        if ((millis() - longPressTime > 5000) && (longPressTime > 0)) {
-#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
-            // Do actual shutdown when button released, otherwise the button release
-            // may wake the board immediatedly.
-            if ((!shutdown_on_long_stop) && (millis() > 30 * 1000)) {
-                screen->startShutdownScreen();
-                LOG_INFO("Shutdown from long press");
-                playBeep();
-#ifdef PIN_LED1
-                ledOff(PIN_LED1);
-#endif
-#ifdef PIN_LED2
-                ledOff(PIN_LED2);
-#endif
-#ifdef PIN_LED3
-                ledOff(PIN_LED3);
-#endif
-                shutdown_on_long_stop = true;
-            }
-#endif
-        } else {
-            // LOG_DEBUG("Long press %u\n", (millis() - longPressTime));
-        }
-    }
-
-    static void userButtonDoublePressed()
-    {
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
-        digitalWrite(PIN_EINK_EN, digitalRead(PIN_EINK_EN) == LOW);
-#endif
-        screen->print("Sent ad-hoc ping\n");
-        service.refreshLocalMeshNode();
-        service.sendNetworkPing(NODENUM_BROADCAST, true);
-    }
-
-    static void userButtonMultiPressed()
-    {
-        if (!config.device.disable_triple_click && (gps != nullptr)) {
-            config.position.gps_enabled = !(config.position.gps_enabled);
-            if (config.position.gps_enabled) {
-                LOG_DEBUG("Flag set to true to restore power\n");
-                gps->enable();
-
-            } else {
-                LOG_DEBUG("Flag set to false for gps power\n");
-                gps->disable();
-            }
-        }
-    }
-
-    static void userButtonPressedLongStart()
-    {
-#ifdef T_DECK
-        // False positive long-press triggered on T-Deck with i2s audio, so short circuit
-        if (moduleConfig.external_notification.enabled && (externalNotificationModule->nagCycleCutoff != UINT32_MAX)) {
-            return;
-        }
-#endif
-        if (millis() > 30 * 1000) {
-            LOG_DEBUG("Long press start!\n");
-            longPressTime = millis();
-        }
-    }
-
-    static void userButtonPressedLongStop()
-    {
-        if (millis() > 30 * 1000) {
-            LOG_DEBUG("Long press stop!\n");
-            longPressTime = 0;
-            if (shutdown_on_long_stop) {
-                playShutdownMelody();
-                delay(3000);
-                power->shutdown();
-            }
-        }
-    }
+    // IRQ callbacks
+    static void userButtonPressed() { btnEvent = BUTTON_EVENT_PRESSED; }
+    static void userButtonDoublePressed() { btnEvent = BUTTON_EVENT_DOUBLE_PRESSED; }
+    static void userButtonMultiPressed(void *callerThread); // Retrieve click count from non-static Onebutton while still valid
+    static void userButtonPressedLongStart();
+    static void userButtonPressedLongStop();
+    static void touchPressedLongStart() { btnEvent = BUTTON_EVENT_TOUCH_LONG_PRESSED; }
 };
 
-} // namespace concurrency
+extern ButtonThread *buttonThread;

src/DebugConfiguration.h

@@ -28,7 +28,7 @@
 #define DEBUG_PORT (*console) // Serial debug port
 
 #ifdef USE_SEGGER
-#define DEBUG_PORT
+// #undef DEBUG_PORT
 #define LOG_DEBUG(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_INFO(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_WARN(...) SEGGER_RTT_printf(0, __VA_ARGS__)
@@ -36,7 +36,7 @@
 #define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__)
 #else
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
 #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__)
 #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__)
 #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__)

src/FSCommon.cpp

@@ -205,6 +205,62 @@ void rmDir(const char *dirname)
 #endif
 }
 
+bool fsCheck()
+{
+#if defined(ARCH_NRF52)
+    size_t write_size = 0;
+    size_t read_size = 0;
+    char buf[32] = {0};
+
+    Adafruit_LittleFS_Namespace::File file(FSCom);
+    const char *text = "meshtastic fs test";
+    size_t text_length = strlen(text);
+    const char *filename = "/meshtastic.txt";
+
+    LOG_DEBUG("Try create file .\n");
+    if (file.open(filename, FILE_O_WRITE)) {
+        write_size = file.write(text);
+    } else {
+        LOG_DEBUG("Open file failed .\n");
+        goto FORMAT_FS;
+    }
+
+    if (write_size != text_length) {
+        LOG_DEBUG("Text bytes do not match .\n");
+        file.close();
+        goto FORMAT_FS;
+    }
+
+    file.close();
+
+    if (!file.open(filename, FILE_O_READ)) {
+        LOG_DEBUG("Open file failed .\n");
+        goto FORMAT_FS;
+    }
+
+    read_size = file.readBytes(buf, text_length);
+    if (read_size != text_length) {
+        LOG_DEBUG("Text bytes do not match .\n");
+        file.close();
+        goto FORMAT_FS;
+    }
+
+    if (memcmp(buf, text, text_length) != 0) {
+        LOG_DEBUG("The written bytes do not match the read bytes .\n");
+        file.close();
+        goto FORMAT_FS;
+    }
+    return true;
+FORMAT_FS:
+    LOG_DEBUG("Format FS ....\n");
+    FSCom.format();
+    FSCom.begin();
+    return false;
+#else
+    return true;
+#endif
+}
+
 void fsInit()
 {
 #ifdef FSCom
@@ -212,8 +268,37 @@ void fsInit()
         LOG_ERROR("Filesystem mount Failed.\n");
         // assert(0); This auto-formats the partition, so no need to fail here.
     }
-#ifdef ARCH_ESP32
+#if defined(ARCH_ESP32)
     LOG_DEBUG("Filesystem files (%d/%d Bytes):\n", FSCom.usedBytes(), FSCom.totalBytes());
+#elif defined(ARCH_NRF52)
+    /*
+     * nRF52840 has a certain chance of automatic formatting failure.
+     * Try to create a file after initializing the file system. If the creation fails,
+     * it means that the file system is not working properly. Please format it manually again.
+     * To check the normality of the file system, you need to disable the LFS_NO_ASSERT assertion.
+     * Otherwise, the assertion will be entered at the moment of reading or opening, and the FS will not be formatted.
+     * */
+    bool ret = false;
+    uint8_t retry = 3;
+
+    while (retry--) {
+        ret = fsCheck();
+        if (ret) {
+            LOG_DEBUG("File system check is OK.\n");
+            break;
+        }
+        delay(10);
+    }
+
+    // It may not be possible to reach this step.
+    // Add a loop here to prevent unpredictable situations from happening.
+    // Can add a screen to display error status later.
+    if (!ret) {
+        while (1) {
+            LOG_ERROR("The file system is damaged and cannot proceed to the next step.\n");
+            delay(1000);
+        }
+    }
 #else
     LOG_DEBUG("Filesystem files:\n");
 #endif

src/GPSStatus.h

@@ -4,8 +4,6 @@
 #include "configuration.h"
 #include <Arduino.h>
 
-extern NodeDB nodeDB;
-
 namespace meshtastic
 {
 
@@ -55,7 +53,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed latitude\n");
 #endif
-            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.latitude_i;
         } else {
             return p.latitude_i;
@@ -68,7 +66,7 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed longitude\n");
 #endif
-            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.longitude_i;
         } else {
             return p.longitude_i;
@@ -81,27 +79,18 @@ class GPSStatus : public Status
 #ifdef GPS_EXTRAVERBOSE
             LOG_WARN("Using fixed altitude\n");
 #endif
-            meshtastic_NodeInfoLite *node = nodeDB.getMeshNode(nodeDB.getNodeNum());
+            meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
             return node->position.altitude;
         } else {
             return p.altitude;
         }
     }
 
-    uint32_t getDOP() const
-    {
-        return p.PDOP;
-    }
+    uint32_t getDOP() const { return p.PDOP; }
 
-    uint32_t getHeading() const
-    {
-        return p.ground_track;
-    }
+    uint32_t getHeading() const { return p.ground_track; }
 
-    uint32_t getNumSatellites() const
-    {
-        return p.sats_in_view;
-    }
+    uint32_t getNumSatellites() const { return p.sats_in_view; }
 
     bool matches(const GPSStatus *newStatus) const
     {

src/Observer.h

@@ -10,12 +10,12 @@ template <class T> class Observable;
  */
 template <class T> class Observer
 {
-    std::list<Observable<T> *> observed;
+    std::list<Observable<T> *> observables;
 
   public:
     virtual ~Observer();
 
-    /// Stop watching the obserable
+    /// Stop watching the observable
     void unobserve(Observable<T> *o);
 
     /// Start watching a specified observable
@@ -86,21 +86,21 @@ template <class T> class Observable
 
 template <class T> Observer<T>::~Observer()
 {
-    for (typename std::list<Observable<T> *>::const_iterator iterator = observed.begin(); iterator != observed.end();
+    for (typename std::list<Observable<T> *>::const_iterator iterator = observables.begin(); iterator != observables.end();
          ++iterator) {
         (*iterator)->removeObserver(this);
     }
-    observed.clear();
+    observables.clear();
 }
 
 template <class T> void Observer<T>::unobserve(Observable<T> *o)
 {
     o->removeObserver(this);
-    observed.remove(o);
+    observables.remove(o);
 }
 
 template <class T> void Observer<T>::observe(Observable<T> *o)
 {
-    observed.push_back(o);
+    observables.push_back(o);
     o->addObserver(this);
 }

src/Power.cpp

@@ -24,11 +24,13 @@
 #include "nrfx_power.h"
 #endif
 
-#ifdef DEBUG_HEAP_MQTT
+#if defined(DEBUG_HEAP_MQTT) && !MESHTASTIC_EXCLUDE_MQTT
 #include "mqtt/MQTT.h"
 #include "target_specific.h"
+#if !MESTASTIC_EXCLUDE_WIFI
 #include <WiFi.h>
 #endif
+#endif
 
 #ifndef DELAY_FOREVER
 #define DELAY_FOREVER portMAX_DELAY
@@ -48,13 +50,26 @@ RTC_NOINIT_ATTR uint64_t RTC_reg_b;
 
 esp_adc_cal_characteristics_t *adc_characs = (esp_adc_cal_characteristics_t *)calloc(1, sizeof(esp_adc_cal_characteristics_t));
 #ifndef ADC_ATTENUATION
-static const adc_atten_t atten = ADC_ATTEN_DB_11;
+static const adc_atten_t atten = ADC_ATTEN_DB_12;
 #else
 static const adc_atten_t atten = ADC_ATTENUATION;
 #endif
 #endif // BATTERY_PIN && ARCH_ESP32
 
-#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
+#ifdef EXT_CHRG_DETECT
+#ifndef EXT_CHRG_DETECT_MODE
+static const uint8_t ext_chrg_detect_mode = INPUT;
+#else
+static const uint8_t ext_chrg_detect_mode = EXT_CHRG_DETECT_MODE;
+#endif
+#ifndef EXT_CHRG_DETECT_VALUE
+static const uint8_t ext_chrg_detect_value = HIGH;
+#else
+static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE;
+#endif
+#endif
+
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
 INA260Sensor ina260Sensor;
 INA219Sensor ina219Sensor;
 INA3221Sensor ina3221Sensor;
@@ -127,8 +142,6 @@ class AnalogBatteryLevel : public HasBatteryLevel
 {
     /**
      * Battery state of charge, from 0 to 100 or -1 for unknown
-     *
-     * FIXME - use a lipo lookup table, the current % full is super wrong
      */
     virtual int getBatteryPercent() override
     {
@@ -137,13 +150,32 @@ class AnalogBatteryLevel : public HasBatteryLevel
         if (v < noBatVolt)
             return -1; // If voltage is super low assume no battery installed
 
-#ifdef ARCH_ESP32
+#ifdef NO_BATTERY_LEVEL_ON_CHARGE
         // This does not work on a RAK4631 with battery connected
         if (v > chargingVolt)
             return 0; // While charging we can't report % full on the battery
 #endif
-
-        return clamp((int)(100 * (v - emptyVolt) / (fullVolt - emptyVolt)), 0, 100);
+        /**
+         * @brief   Battery voltage lookup table interpolation to obtain a more
+         * precise percentage rather than the old proportional one.
+         * @author  Gabriele Russo
+         * @date    06/02/2024
+         */
+        float battery_SOC = 0.0;
+        uint16_t voltage = v / NUM_CELLS; // single cell voltage (average)
+        for (int i = 0; i < NUM_OCV_POINTS; i++) {
+            if (OCV[i] <= voltage) {
+                if (i == 0) {
+                    battery_SOC = 100.0; // 100% full
+                } else {
+                    // interpolate between OCV[i] and OCV[i-1]
+                    battery_SOC = (float)100.0 / (NUM_OCV_POINTS - 1.0) *
+                                  (NUM_OCV_POINTS - 1.0 - i + ((float)voltage - OCV[i]) / (OCV[i - 1] - OCV[i]));
+                }
+                break;
+            }
+        }
+        return clamp((int)(battery_SOC), 0, 100);
     }
 
     /**
@@ -152,7 +184,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual uint16_t getBattVoltage() override
     {
 
-#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU)
+#if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(HAS_PMU) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (hasINA()) {
             LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage\n", config.power.device_battery_ina_address);
             return getINAVoltage();
@@ -164,7 +196,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
 #endif
 
 #ifndef BATTERY_SENSE_SAMPLES
-#define BATTERY_SENSE_SAMPLES 30
+#define BATTERY_SENSE_SAMPLES                                                                                                    \
+    15 // Set the number of samples, it has an effect of increasing sensitivity in complex electromagnetic environment.
 #endif
 
 #ifdef BATTERY_PIN
@@ -176,27 +209,97 @@ class AnalogBatteryLevel : public HasBatteryLevel
         if (millis() - last_read_time_ms > min_read_interval) {
             last_read_time_ms = millis();
 
-            // Set the number of samples, it has an effect of increasing sensitivity, especially in complex electromagnetic
-            // environment.
             uint32_t raw = 0;
-#ifdef ARCH_ESP32
-#ifndef BAT_MEASURE_ADC_UNIT // ADC1
-#ifdef ADC_CTRL
-            if (heltec_version == 5) {
-                pinMode(ADC_CTRL, OUTPUT);
-                digitalWrite(ADC_CTRL, HIGH);
-                delay(10);
+            float scaled = 0;
+
+#ifdef ARCH_ESP32 // ADC block for espressif platforms
+            raw = espAdcRead();
+            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
+            scaled *= operativeAdcMultiplier;
+#else // block for all other platforms
+            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+                raw += analogRead(BATTERY_PIN);
             }
+            raw = raw / BATTERY_SENSE_SAMPLES;
+            scaled = operativeAdcMultiplier * ((1000 * AREF_VOLTAGE) / pow(2, BATTERY_SENSE_RESOLUTION_BITS)) * raw;
+#endif
+
+            if (!initial_read_done) {
+                // Flush the smoothing filter with an ADC reading, if the reading is plausibly correct
+                if (scaled > last_read_value)
+                    last_read_value = scaled;
+                initial_read_done = true;
+            } else {
+                // Already initialized - filter this reading
+                last_read_value += (scaled - last_read_value) * 0.5; // Virtual LPF
+            }
+
+            // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u filtered=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled), (uint32_t)
+            // (last_read_value));
+        }
+        return last_read_value;
+#endif // BATTERY_PIN
+        return 0;
+    }
+
+#if defined(ARCH_ESP32) && !defined(HAS_PMU) && defined(BATTERY_PIN)
+    /**
+     * ESP32 specific function for getting calibrated ADC reads
+     */
+    uint32_t espAdcRead()
+    {
+
+        uint32_t raw = 0;
+        uint8_t raw_c = 0; // raw reading counter
+
+#ifndef BAT_MEASURE_ADC_UNIT // ADC1
+#ifdef ADC_CTRL              // enable adc voltage divider when we need to read
+        pinMode(ADC_CTRL, OUTPUT);
+        digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED);
+        delay(10);
 #endif
         for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
-                raw += adc1_get_raw(adc_channel);
+            int val_ = adc1_get_raw(adc_channel);
+            if (val_ >= 0) { // save only valid readings
+                raw += val_;
+                raw_c++;
             }
-#ifdef ADC_CTRL
-            if (heltec_version == 5) {
-                digitalWrite(ADC_CTRL, LOW);
+            // delayMicroseconds(100);
         }
+#ifdef ADC_CTRL // disable adc voltage divider when we need to read
+        digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED);
 #endif
 #else // ADC2
+#ifdef ADC_CTRL
+#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
+        pinMode(ADC_CTRL, OUTPUT);
+        digitalWrite(ADC_CTRL, LOW); // ACTIVE LOW
+        delay(10);
+#endif
+#endif // End ADC_CTRL
+
+#ifdef CONFIG_IDF_TARGET_ESP32S3 // ESP32S3
+        // ADC2 wifi bug workaround not required, breaks compile
+        // On ESP32S3, ADC2 can take turns with Wifi (?)
+
+        int32_t adc_buf;
+        esp_err_t read_result;
+
+        // Multiple samples
+        for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
+            adc_buf = 0;
+            read_result = -1;
+
+            read_result = adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
+            if (read_result == ESP_OK) {
+                raw += adc_buf;
+                raw_c++; // Count valid samples
+            } else {
+                LOG_DEBUG("An attempt to sample ADC2 failed\n");
+            }
+        }
+
+#else  // Other ESP32
         int32_t adc_buf = 0;
         for (int i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
             // ADC2 wifi bug workaround, see
@@ -205,36 +308,20 @@ class AnalogBatteryLevel : public HasBatteryLevel
             SET_PERI_REG_MASK(SENS_SAR_READ_CTRL2_REG, SENS_SAR2_DATA_INV);
             adc2_get_raw(adc_channel, ADC_WIDTH_BIT_12, &adc_buf);
             raw += adc_buf;
+            raw_c++;
         }
 #endif // BAT_MEASURE_ADC_UNIT
-#else  // !ARCH_ESP32
-            for (uint32_t i = 0; i < BATTERY_SENSE_SAMPLES; i++) {
-                raw += analogRead(BATTERY_PIN);
+
+#ifdef ADC_CTRL
+#if defined(HELTEC_WIRELESS_PAPER) || defined(HELTEC_WIRELESS_PAPER_V1_0)
+        digitalWrite(ADC_CTRL, HIGH);
+#endif
+#endif // End ADC_CTRL
+
+#endif // End BAT_MEASURE_ADC_UNIT
+        return (raw / (raw_c < 1 ? 1 : raw_c));
     }
 #endif
-            raw = raw / BATTERY_SENSE_SAMPLES;
-            float scaled;
-#ifdef ARCH_ESP32
-            scaled = esp_adc_cal_raw_to_voltage(raw, adc_characs);
-            scaled *= operativeAdcMultiplier;
-#else
-#ifndef VBAT_RAW_TO_SCALED
-            scaled = 1000.0 * operativeAdcMultiplier * (AREF_VOLTAGE / 1024.0) * raw;
-#else
-            scaled = VBAT_RAW_TO_SCALED(raw); // defined in variant.h
-#endif // VBAT RAW TO SCALED
-#endif // ARCH_ESP32
-       // LOG_DEBUG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
-
-            last_read_value = scaled;
-            return scaled;
-        } else {
-            return last_read_value;
-        }
-#else
-        return 0;
-#endif // BATTERY_PIN
-    }
 
     /**
      * return true if there is a battery installed in this unit
@@ -260,31 +347,32 @@ class AnalogBatteryLevel : public HasBatteryLevel
 
     /// Assume charging if we have a battery and external power is connected.
     /// we can't be smart enough to say 'full'?
-    virtual bool isCharging() override { return isBatteryConnect() && isVbusIn(); }
+    virtual bool isCharging() override
+    {
+#ifdef EXT_CHRG_DETECT
+        return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
+#else
+        return isBatteryConnect() && isVbusIn();
+#endif
+    }
 
   private:
     /// If we see a battery voltage higher than physics allows - assume charger is pumping
     /// in power
 
-#ifndef BAT_FULLVOLT
-#define BAT_FULLVOLT 4200
-#endif
-#ifndef BAT_EMPTYVOLT
-#define BAT_EMPTYVOLT 3270
-#endif
-#ifndef BAT_CHARGINGVOLT
-#define BAT_CHARGINGVOLT 4210
-#endif
-#ifndef BAT_NOBATVOLT
-#define BAT_NOBATVOLT 2230
-#endif
-
-    /// For heltecs with no battery connected, the measured voltage is 2204, so raising to 2230 from 2100
-    const float fullVolt = BAT_FULLVOLT, emptyVolt = BAT_EMPTYVOLT, chargingVolt = BAT_CHARGINGVOLT, noBatVolt = BAT_NOBATVOLT;
-    float last_read_value = 0.0;
+    /// For heltecs with no battery connected, the measured voltage is 2204, so
+    // need to be higher than that, in this case is 2500mV (3000-500)
+    const uint16_t OCV[NUM_OCV_POINTS] = {OCV_ARRAY};
+    const float chargingVolt = (OCV[0] + 10) * NUM_CELLS;
+    const float noBatVolt = (OCV[NUM_OCV_POINTS - 1] - 500) * NUM_CELLS;
+    // Start value from minimum voltage for the filter to not start from 0
+    // that could trigger some events.
+    // This value is over-written by the first ADC reading, it the voltage seems reasonable.
+    bool initial_read_done = false;
+    float last_read_value = (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS);
     uint32_t last_read_time_ms = 0;
 
-#if defined(HAS_TELEMETRY) && !defined(ARCH_PORTDUINO)
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
     uint16_t getINAVoltage()
     {
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) {
@@ -335,6 +423,9 @@ bool Power::analogInit()
 #ifdef EXT_PWR_DETECT
     pinMode(EXT_PWR_DETECT, INPUT);
 #endif
+#ifdef EXT_CHRG_DETECT
+    pinMode(EXT_CHRG_DETECT, ext_chrg_detect_mode);
+#endif
 
 #ifdef BATTERY_PIN
     LOG_DEBUG("Using analog input %d for battery level\n", BATTERY_PIN);
@@ -358,8 +449,11 @@ bool Power::analogInit()
     adc1_config_channel_atten(adc_channel, atten);
 #else // ADC2
     adc2_config_channel_atten(adc_channel, atten);
+#ifndef CONFIG_IDF_TARGET_ESP32S3
     // ADC2 wifi bug workaround
+    // Not required with ESP32S3, breaks compile
     RTC_reg_b = READ_PERI_REG(SENS_SAR_READ_CTRL2_REG);
+#endif
 #endif
     // calibrate ADC
     esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs);
@@ -368,13 +462,16 @@ bool Power::analogInit()
         LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse\n");
     } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
         LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse\n");
-    } else {
+    }
+#ifdef CONFIG_IDF_TARGET_ESP32S3
+    // ESP32S3
+    else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) {
+        LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse\n");
+    }
+#endif
+    else {
         LOG_INFO("ADCmod: ADC characterization based on default reference voltage\n");
     }
-#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3)
-    pinMode(37, OUTPUT); // needed for P channel mosfet to work
-    digitalWrite(37, LOW);
-#endif
 #endif // ARCH_ESP32
 
 #ifdef ARCH_NRF52
@@ -383,11 +480,12 @@ bool Power::analogInit()
 #else
     analogReference(AR_INTERNAL); // 3.6V
 #endif
-    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS); // Default of 12 is not very linear. Recommended to use 10 or 11
-                                                         // depending on needed resolution.
-
 #endif // ARCH_NRF52
 
+#ifndef ARCH_ESP32
+    analogReadResolution(BATTERY_SENSE_RESOLUTION_BITS);
+#endif
+
     batteryLevel = &analogLevel;
     return true;
 #else
@@ -412,19 +510,9 @@ bool Power::setup()
 
 void Power::shutdown()
 {
-    screen->setOn(false);
-#if defined(USE_EINK) && defined(PIN_EINK_EN)
-    digitalWrite(PIN_EINK_EN, LOW); // power off backlight first
-#endif
-
     LOG_INFO("Shutting down\n");
 
-#ifdef HAS_PMU
-    if (pmu_found == true) {
-        PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
-        PMU->shutdown();
-    }
-#elif defined(ARCH_NRF52) || defined(ARCH_ESP32)
+#if defined(ARCH_NRF52) || defined(ARCH_ESP32)
 #ifdef PIN_LED1
     ledOff(PIN_LED1);
 #endif
@@ -454,10 +542,10 @@ void Power::readPowerStatus()
                 batteryChargePercent = batteryLevel->getBatteryPercent();
             } else {
                 // If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
-                // In that case, we compute an estimate of the charge percent based on maximum and minimum voltages defined in
-                // power.h
-                batteryChargePercent =
-                    clamp((int)(((batteryVoltageMv - BAT_MILLIVOLTS_EMPTY) * 1e2) / (BAT_MILLIVOLTS_FULL - BAT_MILLIVOLTS_EMPTY)),
+                // In that case, we compute an estimate of the charge percent based on open circuite voltage table defined
+                // in power.h
+                batteryChargePercent = clamp((int)(((batteryVoltageMv - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS)) * 1e2) /
+                                                   ((OCV[0] * NUM_CELLS) - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS))),
                                              0, 100);
             }
         }
@@ -467,15 +555,25 @@ void Power::readPowerStatus()
 #ifdef NRF_APM // Section of code detects USB power on the RAK4631 and updates the power states.  Takes 20 seconds or so to detect
                // changes.
 
+        static nrfx_power_usb_state_t prev_nrf_usb_state = (nrfx_power_usb_state_t)-1; // -1 so that state detected at boot
         nrfx_power_usb_state_t nrf_usb_state = nrfx_power_usbstatus_get();
 
+        // If state changed
+        if (nrf_usb_state != prev_nrf_usb_state) {
+            // If changed to DISCONNECTED
             if (nrf_usb_state == NRFX_POWER_USB_STATE_DISCONNECTED) {
                 powerFSM.trigger(EVENT_POWER_DISCONNECTED);
                 NRF_USB = OptFalse;
-        } else {
+            }
+            // If changed to CONNECTED / READY
+            else {
                 powerFSM.trigger(EVENT_POWER_CONNECTED);
                 NRF_USB = OptTrue;
             }
+
+            // Cache the current state
+            prev_nrf_usb_state = nrf_usb_state;
+        }
 #endif
         // Notify any status instances that are observing us
         const PowerStatus powerStatus2 = PowerStatus(
@@ -523,10 +621,11 @@ void Power::readPowerStatus()
 
 #endif
 
-        // If we have a battery at all and it is less than 10% full, force deep sleep if we have more than 10 low readings in
-        // a row
+        // If we have a battery at all and it is less than 0%, force deep sleep if we have more than 10 low readings in
+        // a row. NOTE: min LiIon/LiPo voltage is 2.0 to 2.5V, current OCV min is set to 3100 that is large enough.
+        //
         if (powerStatus2.getHasBattery() && !powerStatus2.getHasUSB()) {
-            if (batteryLevel->getBattVoltage() < MIN_BAT_MILLIVOLTS) {
+            if (batteryLevel->getBattVoltage() < OCV[NUM_OCV_POINTS - 1]) {
                 low_voltage_counter++;
                 LOG_DEBUG("Low voltage counter: %d/10\n", low_voltage_counter);
                 if (low_voltage_counter > 10) {

src/PowerFSM.cpp

@@ -8,6 +8,7 @@
  * actions to be taken upon entering or exiting each state.
  */
 #include "PowerFSM.h"
+#include "Default.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "configuration.h"
@@ -16,6 +17,10 @@
 #include "sleep.h"
 #include "target_specific.h"
 
+#ifndef SLEEP_TIME
+#define SLEEP_TIME 30
+#endif
+
 /// Should we behave as if we have AC power now?
 static bool isPowered()
 {
@@ -45,7 +50,7 @@ static void sdsEnter()
 {
     LOG_DEBUG("Enter state: SDS\n");
     // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw
-    doDeepSleep(getConfiguredOrDefaultMs(config.power.sds_secs), false);
+    doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false);
 }
 
 extern Power *power;
@@ -80,7 +85,7 @@ static void lsIdle()
         // If some other service would stall sleep, don't let sleep happen yet
         if (doPreflightSleep()) {
             // Briefly come out of sleep long enough to blink the led once every few seconds
-            uint32_t sleepTime = 30;
+            uint32_t sleepTime = SLEEP_TIME;
 
             setLed(false); // Never leave led on while in light sleep
             esp_sleep_source_t wakeCause2 = doLightSleep(sleepTime * 1000LL);
@@ -102,9 +107,7 @@ static void lsIdle()
                 break;
 
             default:
-                // We woke for some other reason (button press, device interrupt)
-                // uint64_t status = esp_sleep_get_ext1_wakeup_status();
-                LOG_INFO("wakeCause2 %d\n", wakeCause2);
+                // We woke for some other reason (button press, device IRQ interrupt)
 
 #ifdef BUTTON_PIN
                 bool pressed = !digitalRead(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN);
@@ -182,10 +185,12 @@ static void powerEnter()
         screen->setOn(true);
         setBluetoothEnable(true);
         // within enter() the function getState() returns the state we came from
-        if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
+
+        // Mothballed: print change of power-state to device screen
+        /* if (strcmp(powerFSM.getState()->name, "BOOT") != 0 && strcmp(powerFSM.getState()->name, "POWER") != 0 &&
             strcmp(powerFSM.getState()->name, "DARK") != 0) {
             screen->print("Powered...\n");
-        }
+        }*/
     }
 }
 
@@ -202,8 +207,10 @@ static void powerExit()
 {
     screen->setOn(true);
     setBluetoothEnable(true);
-    if (!isPowered())
-        screen->print("Unpowered...\n");
+
+    // Mothballed: print change of power-state to device screen
+    /*if (!isPowered())
+        screen->print("Unpowered...\n");*/
 }
 
 static void onEnter()
@@ -246,6 +253,7 @@ void PowerFSM_setup()
 {
     bool isRouter = (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ? 1 : 0);
     bool isTrackerOrSensor = config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
+                             config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER ||
                              config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR;
     bool hasPower = isPowered();
 
@@ -340,15 +348,18 @@ void PowerFSM_setup()
 
     powerFSM.add_transition(&stateDARK, &stateDARK, EVENT_CONTACT_FROM_PHONE, NULL, "Contact from phone");
 
+#ifdef USE_EINK
+    // Allow E-Ink devices to suppress the screensaver, if screen timeout set to 0
+    if (config.display.screen_on_secs > 0)
+#endif
+    {
         powerFSM.add_timed_transition(&stateON, &stateDARK,
-                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
         powerFSM.add_timed_transition(&statePOWER, &stateDARK,
-                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
-    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
-                                  getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
-                                  "Screen-on timeout");
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
+    }
 
 // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
 #ifdef ARCH_ESP32
@@ -357,12 +368,26 @@ void PowerFSM_setup()
     // modules
     if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
         powerFSM.add_timed_transition(&stateNB, &stateLS,
-                                      getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
+                                      Default::getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL,
                                       "Min wake timeout");
-        powerFSM.add_timed_transition(&stateDARK, &stateLS,
-                                      getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs),
-                                      NULL, "Bluetooth timeout");
+
+        // If ESP32 and using power-saving, timer mover from DARK to light-sleep
+        // Also serves purpose of the old DARK to DARK transition(?) See https://github.com/meshtastic/firmware/issues/3517
+        powerFSM.add_timed_transition(
+            &stateDARK, &stateLS,
+            Default::getConfiguredOrDefaultMs(config.power.wait_bluetooth_secs, default_wait_bluetooth_secs), NULL,
+            "Bluetooth timeout");
+    } else {
+        // If ESP32, but not using power-saving, check periodically if config has drifted out of stateDark
+        powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                      Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs),
+                                      NULL, "Screen-on timeout");
     }
+#else
+    // If not ESP32, light-sleep not used. Check periodically if config has drifted out of stateDark
+    powerFSM.add_timed_transition(&stateDARK, &stateDARK,
+                                  Default::getConfiguredOrDefaultMs(config.display.screen_on_secs, default_screen_on_secs), NULL,
+                                  "Screen-on timeout");
 #endif
 
     powerFSM.run_machine(); // run one iteration of the state machine, so we run our on enter tasks for the initial DARK state

src/PowerFSMThread.h

@@ -1,3 +1,4 @@
+#include "Default.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "concurrency/OSThread.h"
@@ -28,7 +29,7 @@ class PowerFSMThread : public OSThread
             timeLastPowered = millis();
         } else if (config.power.on_battery_shutdown_after_secs > 0 && config.power.on_battery_shutdown_after_secs != UINT32_MAX &&
                    millis() > (timeLastPowered +
-                               getConfiguredOrDefaultMs(
+                               Default::getConfiguredOrDefaultMs(
                                    config.power.on_battery_shutdown_after_secs))) { // shutdown after 30 minutes unpowered
             powerFSM.trigger(EVENT_SHUTDOWN);
         }

src/PowerStatus.h

@@ -59,9 +59,18 @@ class PowerStatus : public Status
     int getBatteryVoltageMv() const { return batteryVoltageMv; }
 
     /**
-     * Note: 0% battery means 'unknown/this board doesn't have a battery installed'
+     * Note: for boards with battery pin or PMU, 0% battery means 'unknown/this board doesn't have a battery installed'
      */
+#if defined(HAS_PMU) || defined(BATTERY_PIN)
     uint8_t getBatteryChargePercent() const { return getHasBattery() ? batteryChargePercent : 0; }
+#endif
+
+    /**
+     * Note: for boards without battery pin and PMU, 101% battery means 'the board is using external power'
+     */
+#if !defined(HAS_PMU) && !defined(BATTERY_PIN)
+    uint8_t getBatteryChargePercent() const { return getHasBattery() ? batteryChargePercent : 101; }
+#endif
 
     bool matches(const PowerStatus *newStatus) const
     {

src/RedirectablePrint.cpp

@@ -10,6 +10,10 @@
 #include <sys/time.h>
 #include <time.h>
 
+#ifdef ARCH_PORTDUINO
+#include "platform/portduino/PortduinoGlue.h"
+#endif
+
 /**
  * A printer that doesn't go anywhere
  */
@@ -68,7 +72,15 @@ size_t RedirectablePrint::vprintf(const char *format, va_list arg)
 
 size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 {
-    if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, "DEBUG") == 0) {
+#ifdef ARCH_PORTDUINO
+    if (settingsMap[logoutputlevel] < level_debug && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0)
+        return 0;
+    else if (settingsMap[logoutputlevel] < level_info && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_INFO) == 0)
+        return 0;
+    else if (settingsMap[logoutputlevel] < level_warn && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_WARN) == 0)
+        return 0;
+#endif
+    if (moduleConfig.serial.override_console_serial_port && strcmp(logLevel, MESHTASTIC_LOG_LEVEL_DEBUG) == 0) {
         return 0;
     }
     size_t r = 0;
@@ -87,7 +99,7 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
 
         // If we are the first message on a report, include the header
         if (!isContinuationMessage) {
-            uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
+            uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // display local time on logfile
             if (rtc_sec > 0) {
                 long hms = rtc_sec % SEC_PER_DAY;
                 // hms += tz.tz_dsttime * SEC_PER_HOUR;
@@ -99,10 +111,17 @@ size_t RedirectablePrint::log(const char *logLevel, const char *format, ...)
                 int hour = hms / SEC_PER_HOUR;
                 int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
                 int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
-
+#ifdef ARCH_PORTDUINO
+                r += ::printf("%s | %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+#else
                 r += printf("%s | %02d:%02d:%02d %u ", logLevel, hour, min, sec, millis() / 1000);
+#endif
             } else
+#ifdef ARCH_PORTDUINO
+                r += ::printf("%s | ??:??:?? %u ", logLevel, millis() / 1000);
+#else
                 r += printf("%s | ??:??:?? %u ", logLevel, millis() / 1000);
+#endif
 
             auto thread = concurrency::OSThread::currentThread;
             if (thread) {

src/SerialConsole.cpp

@@ -2,8 +2,13 @@
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "configuration.h"
+#include "time.h"
 
+#ifdef RP2040_SLOW_CLOCK
+#define Port Serial2
+#else
 #define Port Serial
+#endif
 // Defaulting to the formerly removed phone_timeout_secs value of 15 minutes
 #define SERIAL_CONNECTION_TIMEOUT (15 * 60) * 1000UL
 
@@ -31,6 +36,10 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
     canWrite = false; // We don't send packets to our port until it has talked to us first
                       // setDestination(&noopPrint); for testing, try turning off 'all' debug output and see what leaks
 
+#ifdef RP2040_SLOW_CLOCK
+    Port.setTX(SERIAL2_TX);
+    Port.setRX(SERIAL2_RX);
+#endif
     Port.begin(SERIAL_BAUD);
 #if defined(ARCH_NRF52) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(ARCH_RP2040)
     time_t timeout = millis();
@@ -42,7 +51,9 @@ SerialConsole::SerialConsole() : StreamAPI(&Port), RedirectablePrint(&Port), con
         }
     }
 #endif
+#if !ARCH_PORTDUINO
     emitRebooted();
+#endif
 }
 
 int32_t SerialConsole::runOnce()
@@ -64,7 +75,7 @@ bool SerialConsole::checkIsConnected()
 
 /**
  * we override this to notice when we've received a protobuf over the serial
- * stream.  Then we shunt off debug serial output.
+ * stream.  Then we shut off debug serial output.
  */
 bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len)
 {

src/configuration.h

@@ -74,6 +74,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RTC_DATA_ATTR
 #endif
 
+// -----------------------------------------------------------------------------
+// Regulatory overrides for producing regional builds
+// -----------------------------------------------------------------------------
+
+// Define if region should override user saved region
+// #define LORA_REGIONCODE meshtastic_Config_LoRaConfig_RegionCode_SG_923
+
 // -----------------------------------------------------------------------------
 // Feature toggles
 // -----------------------------------------------------------------------------
@@ -111,6 +118,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MCP9808_ADDR 0x18
 #define INA_ADDR 0x40
 #define INA_ADDR_ALTERNATE 0x41
+#define INA_ADDR_WAVESHARE_UPS 0x43
 #define INA3221_ADDR 0x42
 #define QMC6310_ADDR 0x1C
 #define QMI8658_ADDR 0x6B
@@ -118,8 +126,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SHTC3_ADDR 0x70
 #define LPS22HB_ADDR 0x5C
 #define LPS22HB_ADDR_ALT 0x5D
-#define SHT31_ADDR 0x44
+#define SHT31_4x_ADDR 0x44
 #define PMSA0031_ADDR 0x12
+#define AHT10_ADDR 0x38
+#define RCWL9620_ADDR 0x57
+#define VEML7700_ADDR 0x10
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER
@@ -127,6 +138,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MPU6050_ADDR 0x68
 #define LIS3DH_ADR 0x18
 #define BMA423_ADDR 0x19
+#define LSM6DS3_ADDR 0x6A
 
 // -----------------------------------------------------------------------------
 // LED
@@ -136,14 +148,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 // Security
 // -----------------------------------------------------------------------------
-
 #define ATECC608B_ADDR 0x35
 
+// -----------------------------------------------------------------------------
+// IO Expander
+// -----------------------------------------------------------------------------
+#define TCA9555_ADDR 0x26
+
 // -----------------------------------------------------------------------------
 // GPS
 // -----------------------------------------------------------------------------
-
+#ifndef GPS_BAUDRATE
 #define GPS_BAUDRATE 9600
+#endif
 
 #ifndef GPS_THREAD_INTERVAL
 #define GPS_THREAD_INTERVAL 200
@@ -159,6 +176,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    also enable HAS_ option not specifically disabled by variant.h */
 #include "architecture.h"
 
+#ifndef DEFAULT_REBOOT_SECONDS
+#define DEFAULT_REBOOT_SECONDS 7
+#endif
+
+#ifndef DEFAULT_SHUTDOWN_SECONDS
+#define DEFAULT_SHUTDOWN_SECONDS 2
+#endif
+
 /* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
 
 #ifndef HAS_WIFI
@@ -210,3 +235,64 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef HW_VENDOR
 #error HW_VENDOR must be defined
 #endif
+
+// -----------------------------------------------------------------------------
+// Global switches to turn off features for a minimized build
+// -----------------------------------------------------------------------------
+
+// #define MESHTASTIC_MINIMIZE_BUILD 1
+#ifdef MESHTASTIC_MINIMIZE_BUILD
+#define MESHTASTIC_EXCLUDE_MODULES 1
+#define MESHTASTIC_EXCLUDE_WIFI 1
+#define MESHTASTIC_EXCLUDE_BLUETOOTH 1
+#define MESHTASTIC_EXCLUDE_GPS 1
+#define MESHTASTIC_EXCLUDE_SCREEN 1
+#define MESHTASTIC_EXCLUDE_MQTT 1
+#endif
+
+// Turn off all optional modules
+#ifdef MESHTASTIC_EXCLUDE_MODULES
+#define MESHTASTIC_EXCLUDE_AUDIO 1
+#define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
+#define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1
+#define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1
+#define MESHTASTIC_EXCLUDE_PAXCOUNTER 1
+#define MESHTASTIC_EXCLUDE_POWER_TELEMETRY 1
+#define MESHTASTIC_EXCLUDE_RANGETEST 1
+#define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
+#define MESHTASTIC_EXCLUDE_STOREFORWARD 1
+#define MESHTASTIC_EXCLUDE_ATAK 1
+#define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
+#define MESHTASTIC_EXCLUDE_NEIGHBORINFO 1
+#define MESHTASTIC_EXCLUDE_TRACEROUTE 1
+#define MESHTASTIC_EXCLUDE_WAYPOINT 1
+#define MESHTASTIC_EXCLUDE_INPUTBROKER 1
+#define MESHTASTIC_EXCLUDE_SERIAL 1
+#endif
+
+// // Turn off wifi even if HW supports wifi (webserver relies on wifi and is also disabled)
+#ifdef MESHTASTIC_EXCLUDE_WIFI
+#define MESHTASTIC_EXCLUDE_WEBSERVER 1
+#undef HAS_WIFI
+#define HAS_WIFI 0
+#endif
+
+// // Turn off Bluetooth
+#ifdef MESHTASTIC_EXCLUDE_BLUETOOTH
+#undef HAS_BLUETOOTH
+#define HAS_BLUETOOTH 0
+#endif
+
+// // Turn off GPS
+#ifdef MESHTASTIC_EXCLUDE_GPS
+#undef HAS_GPS
+#define HAS_GPS 0
+#undef MESHTASTIC_EXCLUDE_RANGETEST
+#define MESHTASTIC_EXCLUDE_RANGETEST 1
+#endif
+
+// Turn off Screen
+#ifdef MESHTASTIC_EXCLUDE_SCREEN
+#undef HAS_SCREEN
+#define HAS_SCREEN 0
+#endif

src/detect/LoRaRadioType.h

@@ -0,0 +1,5 @@
+#pragma once
+
+enum LoRaRadioType { NO_RADIO, STM32WLx_RADIO, SIM_RADIO, RF95_RADIO, SX1262_RADIO, SX1268_RADIO, LLCC68_RADIO, SX1280_RADIO };
+
+extern LoRaRadioType radioType;

src/detect/ScanI2C.cpp

@@ -36,8 +36,8 @@ ScanI2C::FoundDevice ScanI2C::firstKeyboard() const
 
 ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const
 {
-    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423};
-    return firstOfOrNONE(3, types);
+    ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3};
+    return firstOfOrNONE(4, types);
 }
 
 ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const

src/detect/ScanI2C.h

@@ -23,11 +23,13 @@ class ScanI2C
         BME_680,
         BME_280,
         BMP_280,
+        BMP_085,
         INA260,
         INA219,
         INA3221,
         MCP9808,
         SHT31,
+        SHT4X,
         SHTC3,
         LPS22HB,
         QMC6310,
@@ -37,9 +39,13 @@ class ScanI2C
         MPU6050,
         LIS3DH,
         BMA423,
-#ifdef HAS_NCP5623
+        BQ24295,
+        LSM6DS3,
+        TCA9555,
+        VEML7700,
+        RCWL9620,
         NCP5623,
-#endif
+        AHT10
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -2,7 +2,7 @@
 
 #include "concurrency/LockGuard.h"
 #include "configuration.h"
-#if defined(ARCH_RASPBERRY_PI)
+#if defined(ARCH_PORTDUINO)
 #include "linux/LinuxHardwareI2C.h"
 #endif
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
@@ -183,8 +183,13 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
             case ATECC608B_ADDR:
-                type = ATECC608B;
-                if (atecc.begin(addr.address) == true) {
+#ifdef RP2040_SLOW_CLOCK
+                if (atecc.begin(addr.address, Wire, Serial2) == true)
+#else
+                if (atecc.begin(addr.address) == true)
+#endif
+
+                {
                     LOG_INFO("ATECC608B initialized\n");
                 } else {
                     LOG_WARN("ATECC608B initialization failed\n");
@@ -242,14 +247,24 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                     LOG_INFO("BME-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = BME_280;
                     break;
+                case 0x55:
+                    LOG_INFO("BMP-085 or BMP-180 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                    type = BMP_085;
+                    break;
                 default:
                     LOG_INFO("BMP-280 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = BMP_280;
                 }
                 break;
-
+#ifndef HAS_NCP5623
+            case AHT10_ADDR:
+                LOG_INFO("AHT10 sensor found at address 0x%x\n", (uint8_t)addr.address);
+                type = AHT10;
+                break;
+#endif
             case INA_ADDR:
             case INA_ADDR_ALTERNATE:
+            case INA_ADDR_WAVESHARE_UPS:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
                 LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
                 if (registerValue == 0x5449) {
@@ -261,8 +276,14 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
                 }
                 break;
             case INA3221_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2);
+                LOG_DEBUG("Register MFG_UID: 0x%x\n", registerValue);
+                if (registerValue == 0x5449) {
                     LOG_INFO("INA3221 sensor found at address 0x%x\n", (uint8_t)addr.address);
                     type = INA3221;
+                } else { // Unknown device
+                    LOG_INFO("No INA3221 found at address 0x%x\n", (uint8_t)addr.address);
+                }
                 break;
             case MCP9808_ADDR:
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2);
@@ -276,19 +297,51 @@ void ScanI2CTwoWire::scanPort(I2CPort port)
 
                 break;
 
-                SCAN_SIMPLE_CASE(SHT31_ADDR, SHT31, "SHT31 sensor found\n")
+            case SHT31_4x_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
+                if (registerValue == 0x11a2) {
+                    type = SHT4X;
+                    LOG_INFO("SHT4X sensor found\n");
+                } else {
+                    type = SHT31;
+                    LOG_INFO("SHT31 sensor found\n");
+                }
+
+                break;
+
                 SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3 sensor found\n")
+                SCAN_SIMPLE_CASE(RCWL9620_ADDR, RCWL9620, "RCWL9620 sensor found\n")
 
             case LPS22HB_ADDR_ALT:
                 SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found\n")
 
                 SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found\n")
-                SCAN_SIMPLE_CASE(QMI8658_ADDR, QMI8658, "QMI8658 Highrate 6-Axis inertial measurement sensor found\n")
+
+            case QMI8658_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0A), 1); // get ID
+                if (registerValue == 0xC0) {
+                    type = BQ24295;
+                    LOG_INFO("BQ24295 PMU found\n");
+                    break;
+                }
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID
+                if (registerValue == 0x6A) {
+                    type = LSM6DS3;
+                    LOG_INFO("LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                } else {
+                    type = QMI8658;
+                    LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found\n");
+                }
+                break;
+
                 SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found\n")
 
                 SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found\n")
                 SCAN_SIMPLE_CASE(MPU6050_ADDR, MPU6050, "MPU6050 accelerometer found\n");
                 SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found\n");
+                SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x\n", (uint8_t)addr.address);
+                SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found\n");
+                SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700 light sensor found\n");
 
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated\n", addr.address);

src/gps/GPS.cpp

@@ -1,9 +1,14 @@
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_GPS
+#include "Default.h"
 #include "GPS.h"
 #include "NodeDB.h"
 #include "RTC.h"
-#include "configuration.h"
+
 #include "main.h" // pmu_found
 #include "sleep.h"
+
+#include "cas.h"
 #include "ubx.h"
 
 #ifdef ARCH_PORTDUINO
@@ -16,7 +21,7 @@
 #define GPS_RESET_MODE HIGH
 #endif
 
-#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_RASPBERRY_PI)
+#if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO)
 HardwareSerial *GPS::_serial_gps = &Serial1;
 #else
 HardwareSerial *GPS::_serial_gps = NULL;
@@ -48,6 +53,28 @@ void GPS::UBXChecksum(uint8_t *message, size_t length)
     message[length - 1] = CK_B;
 }
 
+// Calculate the checksum for a CAS packet
+void GPS::CASChecksum(uint8_t *message, size_t length)
+{
+    uint32_t cksum = ((uint32_t)message[5] << 24); // Message ID
+    cksum += ((uint32_t)message[4]) << 16;         // Class
+    cksum += message[2];                           // Payload Len
+
+    // Iterate over the payload as a series of uint32_t's and
+    // accumulate the cksum
+    uint32_t const *payload = (uint32_t *)(message + 6);
+    for (size_t i = 0; i < (length - 10) / 4; i++) {
+        uint32_t pl = payload[i];
+        cksum += pl;
+    }
+
+    // Place the checksum values in the message
+    message[length - 4] = (cksum & 0xFF);
+    message[length - 3] = (cksum & (0xFF << 8)) >> 8;
+    message[length - 2] = (cksum & (0xFF << 16)) >> 16;
+    message[length - 1] = (cksum & (0xFF << 24)) >> 24;
+}
+
 // Function to create a ublox packet for editing in memory
 uint8_t GPS::makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg)
 {
@@ -69,6 +96,41 @@ uint8_t GPS::makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_siz
     return (payload_size + 8);
 }
 
+// Function to create a CAS packet for editing in memory
+uint8_t GPS::makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg)
+{
+    // General CAS structure
+    //        | H1   | H2   | payload_len | cls  | msg  | Payload       ...   | Checksum                  |
+    // Size:  | 1    | 1    | 2           | 1    | 1    | payload_len         | 4                         |
+    // Pos:   | 0    | 1    | 2    | 3    | 4    | 5    | 6    | 7      ...   | 6 + payload_len ...       |
+    //        |------|------|-------------|------|------|------|--------------|---------------------------|
+    //        | 0xBA | 0xCE | 0xXX | 0xXX | 0xXX | 0xXX | 0xXX | 0xXX   ...   | 0xXX | 0xXX | 0xXX | 0xXX |
+
+    // Construct the CAS packet
+    UBXscratch[0] = 0xBA;         // header 1 (0xBA)
+    UBXscratch[1] = 0xCE;         // header 2 (0xCE)
+    UBXscratch[2] = payload_size; // length 1
+    UBXscratch[3] = 0;            // length 2
+    UBXscratch[4] = class_id;     // class
+    UBXscratch[5] = msg_id;       // id
+
+    UBXscratch[6 + payload_size] = 0x00; // Checksum
+    UBXscratch[7 + payload_size] = 0x00;
+    UBXscratch[8 + payload_size] = 0x00;
+    UBXscratch[9 + payload_size] = 0x00;
+
+    for (int i = 0; i < payload_size; i++) {
+        UBXscratch[6 + i] = pgm_read_byte(&msg[i]);
+    }
+    CASChecksum(UBXscratch, (payload_size + 10));
+
+#if defined(GPS_DEBUG) && defined(DEBUG_PORT)
+    LOG_DEBUG("Constructed CAS packet: \n");
+    DEBUG_PORT.hexDump(MESHTASTIC_LOG_LEVEL_DEBUG, UBXscratch, payload_size + 10);
+#endif
+    return (payload_size + 10);
+}
+
 GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
 {
     uint8_t buffer[768] = {0};
@@ -78,6 +140,7 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
     while (millis() < startTimeout) {
         if (_serial_gps->available()) {
             b = _serial_gps->read();
+
 #ifdef GPS_DEBUG
             LOG_DEBUG("%02X", (char *)buffer);
 #endif
@@ -101,6 +164,67 @@ GPS_RESPONSE GPS::getACK(const char *message, uint32_t waitMillis)
     return GNSS_RESPONSE_NONE;
 }
 
+GPS_RESPONSE GPS::getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis)
+{
+    uint32_t startTime = millis();
+    uint8_t buffer[CAS_ACK_NACK_MSG_SIZE] = {0};
+    uint8_t bufferPos = 0;
+
+    // CAS-ACK-(N)ACK structure
+    //         | H1   | H2   | Payload Len | cls  | msg  | Payload                   | Checksum (4)              |
+    //         |      |      |             |      |      | Cls  | Msg  | Reserved    |                           |
+    //         |------|------|-------------|------|------|------|------|-------------|---------------------------|
+    // ACK-NACK| 0xBA | 0xCE | 0x04 | 0x00 | 0x05 | 0x00 | 0xXX | 0xXX | 0x00 | 0x00 | 0xXX | 0xXX | 0xXX | 0xXX |
+    // ACK-ACK | 0xBA | 0xCE | 0x04 | 0x00 | 0x05 | 0x01 | 0xXX | 0xXX | 0x00 | 0x00 | 0xXX | 0xXX | 0xXX | 0xXX |
+
+    while (millis() - startTime < waitMillis) {
+        if (_serial_gps->available()) {
+            buffer[bufferPos++] = _serial_gps->read();
+
+            // keep looking at the first two bytes of buffer until
+            // we have found the CAS frame header (0xBA, 0xCE), if not
+            // keep reading bytes until we find a frame header or we run
+            // out of time.
+            if ((bufferPos == 2) && !(buffer[0] == 0xBA && buffer[1] == 0xCE)) {
+                buffer[0] = buffer[1];
+                buffer[1] = 0;
+                bufferPos = 1;
+            }
+        }
+
+        // we have read all the bytes required for the Ack/Nack (14-bytes)
+        // and we must have found a frame to get this far
+        if (bufferPos == sizeof(buffer) - 1) {
+            uint8_t msg_cls = buffer[4];     // message class should be 0x05
+            uint8_t msg_msg_id = buffer[5];  // message id should be 0x00 or 0x01
+            uint8_t payload_cls = buffer[6]; // payload class id
+            uint8_t payload_msg = buffer[7]; // payload message id
+
+            // Check for an ACK-ACK for the specified class and message id
+            if ((msg_cls == 0x05) && (msg_msg_id == 0x01) && payload_cls == class_id && payload_msg == msg_id) {
+#ifdef GPS_DEBUG
+                LOG_INFO("Got ACK for class %02X message %02X in %d millis.\n", class_id, msg_id, millis() - startTime);
+#endif
+                return GNSS_RESPONSE_OK;
+            }
+
+            // Check for an ACK-NACK for the specified class and message id
+            if ((msg_cls == 0x05) && (msg_msg_id == 0x00) && payload_cls == class_id && payload_msg == msg_id) {
+#ifdef GPS_DEBUG
+                LOG_WARN("Got NACK for class %02X message %02X in %d millis.\n", class_id, msg_id, millis() - startTime);
+#endif
+                return GNSS_RESPONSE_NAK;
+            }
+
+            // This isn't the frame we are looking for, clear the buffer
+            // and try again until we run out of time.
+            memset(buffer, 0x0, sizeof(buffer));
+            bufferPos = 0;
+        }
+    }
+    return GNSS_RESPONSE_NONE;
+}
+
 GPS_RESPONSE GPS::getACK(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis)
 {
     uint8_t b;
@@ -251,30 +375,9 @@ int GPS::getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t
 bool GPS::setup()
 {
     int msglen = 0;
-    bool isProblematicGPS = false;
 
     if (!didSerialInit) {
 #if !defined(GPS_UC6580)
-#ifdef HAS_PMU
-        // The T-Beam 1.2 has issues with the GPS
-        if (HW_VENDOR == meshtastic_HardwareModel_TBEAM && PMU->getChipModel() == XPOWERS_AXP2101) {
-            gnssModel = GNSS_MODEL_UBLOX;
-            isProblematicGPS = true;
-        }
-#endif
-
-#if defined(RAK4630) && defined(PIN_3V3_EN)
-        // If we are using the RAK4630 and we have no other peripherals on the I2C bus or module interest in 3V3_S,
-        // then we can safely set en_gpio turn off power to 3V3 (IO2) to hard sleep the GPS
-        if (rtc_found.port == ScanI2C::DeviceType::NONE && rgb_found.type == ScanI2C::DeviceType::NONE &&
-            accelerometer_found.port == ScanI2C::DeviceType::NONE && !moduleConfig.detection_sensor.enabled &&
-            !moduleConfig.telemetry.air_quality_enabled && !moduleConfig.telemetry.environment_measurement_enabled &&
-            config.power.device_battery_ina_address == 0 && en_gpio == 0) {
-            LOG_DEBUG("Since no problematic peripherals or interested modules were found, setting power save GPS_EN to pin %i\n",
-                      PIN_3V3_EN);
-            en_gpio = PIN_3V3_EN;
-        }
-#endif
 
         if (tx_gpio && gnssModel == GNSS_MODEL_UNKNOWN) {
             LOG_DEBUG("Probing for GPS at %d \n", serialSpeeds[speedSelect]);
@@ -311,6 +414,53 @@ bool GPS::setup()
             // Switch to Vehicle Mode, since SoftRF enables Aviation < 2g
             _serial_gps->write("$PCAS11,3*1E\r\n");
             delay(250);
+        } else if (gnssModel == GNSS_MODEL_MTK_L76B) {
+            // Waveshare Pico-GPS hat uses the L76B with 9600 baud
+            // Initialize the L76B Chip, use GPS + GLONASS
+            // See note in L76_Series_GNSS_Protocol_Specification, chapter 3.29
+            _serial_gps->write("$PMTK353,1,1,0,0,0*2B\r\n");
+            // Above command will reset the GPS and takes longer before it will accept new commands
+            delay(1000);
+            // only ask for RMC and GGA (GNRMC and GNGGA)
+            // See note in L76_Series_GNSS_Protocol_Specification, chapter 2.1
+            _serial_gps->write("$PMTK314,0,1,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*28\r\n");
+            delay(250);
+            // Enable SBAS
+            _serial_gps->write("$PMTK301,2*2E\r\n");
+            delay(250);
+            // Enable PPS for 2D/3D fix only
+            _serial_gps->write("$PMTK285,3,100*3F\r\n");
+            delay(250);
+            // Switch to Fitness Mode, for running and walking purpose with low speed (<5 m/s)
+            _serial_gps->write("$PMTK886,1*29\r\n");
+            delay(250);
+        } else if (gnssModel == GNSS_MODEL_ATGM336H) {
+            // Set the intial configuration of the device - these _should_ work for most AT6558 devices
+            msglen = makeCASPacket(0x06, 0x07, sizeof(_message_CAS_CFG_NAVX_CONF), _message_CAS_CFG_NAVX_CONF);
+            _serial_gps->write(UBXscratch, msglen);
+            if (getACKCas(0x06, 0x07, 250) != GNSS_RESPONSE_OK) {
+                LOG_WARN("ATGM336H - Could not set Configuration");
+            }
+
+            // Set the update frequence to 1Hz
+            msglen = makeCASPacket(0x06, 0x04, sizeof(_message_CAS_CFG_RATE_1HZ), _message_CAS_CFG_RATE_1HZ);
+            _serial_gps->write(UBXscratch, msglen);
+            if (getACKCas(0x06, 0x04, 250) != GNSS_RESPONSE_OK) {
+                LOG_WARN("ATGM336H - Could not set Update Frequency");
+            }
+
+            // Set the NEMA output messages
+            // Ask for only RMC and GGA
+            uint8_t fields[] = {CAS_NEMA_RMC, CAS_NEMA_GGA};
+            for (unsigned int i = 0; i < sizeof(fields); i++) {
+                // Construct a CAS-CFG-MSG packet
+                uint8_t cas_cfg_msg_packet[] = {0x4e, fields[i], 0x01, 0x00};
+                msglen = makeCASPacket(0x06, 0x01, sizeof(cas_cfg_msg_packet), cas_cfg_msg_packet);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACKCas(0x06, 0x01, 250) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("ATGM336H - Could not enable NMEA MSG: %d\n", fields[i]);
+                }
+            }
         } else if (gnssModel == GNSS_MODEL_UC6580) {
             // The Unicore UC6580 can use a lot of sat systems, enable it to
             // use GPS L1 & L5 + BDS B1I & B2a + GLONASS L1 + GALILEO E1 & E5a + SBAS
@@ -322,26 +472,34 @@ bool GPS::setup()
             // Turn off GSV messages, we don't really care about which and where the sats are, maybe someday.
             _serial_gps->write("$CFGMSG,0,3,0\r\n");
             delay(250);
+            // Turn off GSA messages, TinyGPS++ doesn't use this message.
+            _serial_gps->write("$CFGMSG,0,2,0\r\n");
+            delay(250);
             // Turn off NOTICE __TXT messages, these may provide Unicore some info but we don't care.
             _serial_gps->write("$CFGMSG,6,0,0\r\n");
             delay(250);
             _serial_gps->write("$CFGMSG,6,1,0\r\n");
             delay(250);
-
         } else if (gnssModel == GNSS_MODEL_UBLOX) {
             // Configure GNSS system to GPS+SBAS+GLONASS (Module may restart after this command)
             // We need set it because by default it is GPS only, and we want to use GLONASS too
             // Also we need SBAS for better accuracy and extra features
             // ToDo: Dynamic configure GNSS systems depending of LoRa region
 
-            if (strncmp(info.hwVersion, "00040007", 8) !=
-                0) { // The original ublox 6 is GPS only and doesn't support the UBX-CFG-GNSS message
-                if (strncmp(info.hwVersion, "00070000", 8) == 0) { // Max7 seems to only support GPS *or* GLONASS
+            if (strncmp(info.hwVersion, "000A0000", 8) != 0) {
+                if (strncmp(info.hwVersion, "00040007", 8) != 0) {
+                    // The original ublox Neo-6 is GPS only and doesn't support the UBX-CFG-GNSS message
+                    // Max7 seems to only support GPS *or* GLONASS
+                    // Neo-7 is supposed to support GPS *and* GLONASS but NAKs the CFG-GNSS command to do it
+                    // So treat all the u-blox 7 series as GPS only
+                    // M8 can support 3 constallations at once so turn on GPS, GLONASS and Galileo (or BeiDou)
+
+                    if (strncmp(info.hwVersion, "00070000", 8) == 0) {
                         LOG_DEBUG("Setting GPS+SBAS\n");
                         msglen = makeUBXPacket(0x06, 0x3e, sizeof(_message_GNSS_7), _message_GNSS_7);
                         _serial_gps->write(UBXscratch, msglen);
                     } else {
-                    msglen = makeUBXPacket(0x06, 0x3e, sizeof(_message_GNSS), _message_GNSS);
+                        msglen = makeUBXPacket(0x06, 0x3e, sizeof(_message_GNSS_8), _message_GNSS_8);
                         _serial_gps->write(UBXscratch, msglen);
                     }
 
@@ -352,109 +510,245 @@ bool GPS::setup()
                         if (strncmp(info.hwVersion, "00070000", 8) == 0) {
                             LOG_INFO("GNSS configured for GPS+SBAS. Pause for 0.75s before sending next command.\n");
                         } else {
-                        LOG_INFO("GNSS configured for GPS+SBAS+GLONASS. Pause for 0.75s before sending next command.\n");
+                            LOG_INFO(
+                                "GNSS configured for GPS+SBAS+GLONASS+Galileo. Pause for 0.75s before sending next command.\n");
                         }
                         // Documentation say, we need wait atleast 0.5s after reconfiguration of GNSS module, before sending next
-                    // commands
-                    delay(750);
+                        // commands for the M8 it tends to be more... 1 sec should be enough ;>)
+                        delay(1000);
                     }
                 }
+                // Disable Text Info messages
+                msglen = makeUBXPacket(0x06, 0x02, sizeof(_message_DISABLE_TXT_INFO), _message_DISABLE_TXT_INFO);
+                clearBuffer();
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x02, 500) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to disable text info messages.\n");
+                }
+                // ToDo add M10 tests for below
+                if (strncmp(info.hwVersion, "00080000", 8) == 0) {
+                    msglen = makeUBXPacket(0x06, 0x39, sizeof(_message_JAM_8), _message_JAM_8);
+                    clearBuffer();
+                    _serial_gps->write(UBXscratch, msglen);
+                    if (getACK(0x06, 0x39, 500) != GNSS_RESPONSE_OK) {
+                        LOG_WARN("Unable to enable interference resistance.\n");
+                    }
 
-            msglen = makeUBXPacket(0x06, 0x39, sizeof(_message_JAM), _message_JAM);
+                    msglen = makeUBXPacket(0x06, 0x23, sizeof(_message_NAVX5_8), _message_NAVX5_8);
+                    clearBuffer();
                     _serial_gps->write(UBXscratch, msglen);
-            if (getACK(0x06, 0x39, 300) != GNSS_RESPONSE_OK) {
+                    if (getACK(0x06, 0x23, 500) != GNSS_RESPONSE_OK) {
+                        LOG_WARN("Unable to configure NAVX5_8 settings.\n");
+                    }
+                } else {
+                    msglen = makeUBXPacket(0x06, 0x39, sizeof(_message_JAM_6_7), _message_JAM_6_7);
+                    _serial_gps->write(UBXscratch, msglen);
+                    if (getACK(0x06, 0x39, 500) != GNSS_RESPONSE_OK) {
                         LOG_WARN("Unable to enable interference resistance.\n");
                     }
 
                     msglen = makeUBXPacket(0x06, 0x23, sizeof(_message_NAVX5), _message_NAVX5);
                     _serial_gps->write(UBXscratch, msglen);
-            if (getACK(0x06, 0x23, 300) != GNSS_RESPONSE_OK) {
-                LOG_WARN("Unable to configure extra settings.\n");
+                    if (getACK(0x06, 0x23, 500) != GNSS_RESPONSE_OK) {
+                        LOG_WARN("Unable to configure NAVX5 settings.\n");
                     }
-
-            // ublox-M10S can be compatible with UBLOX traditional protocol, so the following sentence settings are also valid
+                }
+                // Turn off unwanted NMEA messages, set update rate
 
                 msglen = makeUBXPacket(0x06, 0x08, sizeof(_message_1HZ), _message_1HZ);
                 _serial_gps->write(UBXscratch, msglen);
-            if (getACK(0x06, 0x08, 300) != GNSS_RESPONSE_OK) {
+                if (getACK(0x06, 0x08, 500) != GNSS_RESPONSE_OK) {
                     LOG_WARN("Unable to set GPS update rate.\n");
                 }
 
-            msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_GGL), _message_GGL);
+                msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_GLL), _message_GLL);
                 _serial_gps->write(UBXscratch, msglen);
-            if (getACK(0x06, 0x01, 300) != GNSS_RESPONSE_OK) {
-                LOG_WARN("Unable to disable NMEA GGL.\n");
+                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to disable NMEA GLL.\n");
                 }
 
                 msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_GSA), _message_GSA);
                 _serial_gps->write(UBXscratch, msglen);
-            if (getACK(0x06, 0x01, 300) != GNSS_RESPONSE_OK) {
+                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
                     LOG_WARN("Unable to Enable NMEA GSA.\n");
                 }
 
                 msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_GSV), _message_GSV);
                 _serial_gps->write(UBXscratch, msglen);
-            if (getACK(0x06, 0x01, 300) != GNSS_RESPONSE_OK) {
+                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
                     LOG_WARN("Unable to disable NMEA GSV.\n");
                 }
 
                 msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_VTG), _message_VTG);
                 _serial_gps->write(UBXscratch, msglen);
-            if (getACK(0x06, 0x01, 300) != GNSS_RESPONSE_OK) {
+                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
                     LOG_WARN("Unable to disable NMEA VTG.\n");
                 }
 
                 msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_RMC), _message_RMC);
                 _serial_gps->write(UBXscratch, msglen);
-            if (getACK(0x06, 0x01, 300) != GNSS_RESPONSE_OK) {
+                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
                     LOG_WARN("Unable to enable NMEA RMC.\n");
                 }
 
                 msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_GGA), _message_GGA);
                 _serial_gps->write(UBXscratch, msglen);
-            if (getACK(0x06, 0x01, 300) != GNSS_RESPONSE_OK) {
+                if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
                     LOG_WARN("Unable to enable NMEA GGA.\n");
                 }
 
                 if (uBloxProtocolVersion >= 18) {
                     msglen = makeUBXPacket(0x06, 0x86, sizeof(_message_PMS), _message_PMS);
+                    clearBuffer();
                     _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x86, 300) != GNSS_RESPONSE_OK) {
+                    if (getACK(0x06, 0x86, 500) != GNSS_RESPONSE_OK) {
                         LOG_WARN("Unable to enable powersaving for GPS.\n");
                     }
-            } else {
-                if (!(isProblematicGPS)) {
-                    if (strncmp(info.hwVersion, "00040007", 8) == 0) { // This PSM mode has only been tested on this hardware
-                        msglen = makeUBXPacket(0x06, 0x11, 0x2, _message_CFG_RXM_PSM);
+                    msglen = makeUBXPacket(0x06, 0x3B, sizeof(_message_CFG_PM2), _message_CFG_PM2);
                     _serial_gps->write(UBXscratch, msglen);
-                        if (getACK(0x06, 0x11, 300) != GNSS_RESPONSE_OK) {
-                            LOG_WARN("Unable to enable powersaving mode for GPS.\n");
-                        }
-                        msglen = makeUBXPacket(0x06, 0x3B, 44, _message_CFG_PM2);
-                        _serial_gps->write(UBXscratch, msglen);
-                        if (getACK(0x06, 0x3B, 300) != GNSS_RESPONSE_OK) {
+                    if (getACK(0x06, 0x3B, 500) != GNSS_RESPONSE_OK) {
                         LOG_WARN("Unable to enable powersaving details for GPS.\n");
                     }
+                    // For M8 we want to enable NMEA vserion 4.10 so we can see the additional sats.
+                    if (strncmp(info.hwVersion, "00080000", 8) == 0) {
+                        msglen = makeUBXPacket(0x06, 0x17, sizeof(_message_NMEA), _message_NMEA);
+                        clearBuffer();
+                        _serial_gps->write(UBXscratch, msglen);
+                        if (getACK(0x06, 0x17, 500) != GNSS_RESPONSE_OK) {
+                            LOG_WARN("Unable to enable NMEA 4.10.\n");
+                        }
+                    }
                 } else {
+                    if (strncmp(info.hwVersion, "00040007", 8) == 0) { // This PSM mode is only for Neo-6
                         msglen = makeUBXPacket(0x06, 0x11, 0x2, _message_CFG_RXM_ECO);
                         _serial_gps->write(UBXscratch, msglen);
-                        if (getACK(0x06, 0x11, 300) != GNSS_RESPONSE_OK) {
-                            LOG_WARN("Unable to enable powersaving ECO mode for GPS.\n");
+                        if (getACK(0x06, 0x11, 500) != GNSS_RESPONSE_OK) {
+                            LOG_WARN("Unable to enable powersaving ECO mode for Neo-6.\n");
+                        }
+                        msglen = makeUBXPacket(0x06, 0x3B, sizeof(_message_CFG_PM2), _message_CFG_PM2);
+                        _serial_gps->write(UBXscratch, msglen);
+                        if (getACK(0x06, 0x3B, 500) != GNSS_RESPONSE_OK) {
+                            LOG_WARN("Unable to enable powersaving details for GPS.\n");
+                        }
+                        msglen = makeUBXPacket(0x06, 0x01, sizeof(_message_AID), _message_AID);
+                        _serial_gps->write(UBXscratch, msglen);
+                        if (getACK(0x06, 0x01, 500) != GNSS_RESPONSE_OK) {
+                            LOG_WARN("Unable to disable UBX-AID.\n");
+                        }
+                    } else {
+                        msglen = makeUBXPacket(0x06, 0x11, 0x2, _message_CFG_RXM_PSM);
+                        _serial_gps->write(UBXscratch, msglen);
+                        if (getACK(0x06, 0x11, 500) != GNSS_RESPONSE_OK) {
+                            LOG_WARN("Unable to enable powersaving mode for GPS.\n");
+                        }
+
+                        msglen = makeUBXPacket(0x06, 0x3B, sizeof(_message_CFG_PM2), _message_CFG_PM2);
+                        _serial_gps->write(UBXscratch, msglen);
+                        if (getACK(0x06, 0x3B, 500) != GNSS_RESPONSE_OK) {
+                            LOG_WARN("Unable to enable powersaving details for GPS.\n");
                         }
                     }
                 }
+            } else {
+                // LOG_INFO("u-blox M10 hardware found.\n");
+                delay(1000);
+                // First disable all NMEA messages in RAM layer
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_NMEA_RAM), _message_VALSET_DISABLE_NMEA_RAM);
+                clearBuffer();
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to disable NMEA messages for M10 GPS RAM.\n");
+                }
+                delay(250);
+                // Next disable unwanted NMEA messages in BBR layer
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_NMEA_BBR), _message_VALSET_DISABLE_NMEA_BBR);
+                clearBuffer();
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to disable NMEA messages for M10 GPS BBR.\n");
+                }
+                delay(250);
+                // Disable Info txt messages in RAM layer
+                msglen =
+                    makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_TXT_INFO_RAM), _message_VALSET_DISABLE_TXT_INFO_RAM);
+                clearBuffer();
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to disable Info messages for M10 GPS RAM.\n");
+                }
+                delay(250);
+                // Next disable Info txt messages in BBR layer
+                msglen =
+                    makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_TXT_INFO_BBR), _message_VALSET_DISABLE_TXT_INFO_BBR);
+                clearBuffer();
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to disable Info messages for M10 GPS BBR.\n");
+                }
+                // Do M10 configuration for Power Management.
+
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_PM_RAM), _message_VALSET_PM_RAM);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to enable powersaving for M10 GPS RAM.\n");
+                }
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_PM_BBR), _message_VALSET_PM_BBR);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to enable powersaving for M10 GPS BBR.\n");
+                }
+
+                delay(250);
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_ITFM_RAM), _message_VALSET_ITFM_RAM);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to enable Jamming detection M10 GPS RAM.\n");
+                }
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_ITFM_BBR), _message_VALSET_ITFM_BBR);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to enable Jamming detection M10 GPS BBR.\n");
+                }
+
+                // Here is where the init commands should go to do further M10 initialization.
+                delay(250);
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_SBAS_RAM), _message_VALSET_DISABLE_SBAS_RAM);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to disable SBAS M10 GPS RAM.\n");
+                }
+                delay(750); // will cause a receiver restart so wait a bit
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_DISABLE_SBAS_BBR), _message_VALSET_DISABLE_SBAS_BBR);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to disable SBAS M10 GPS BBR.\n");
+                }
+                delay(750); // will cause a receiver restart so wait a bit
+                // Done with initialization, Now enable wanted NMEA messages in BBR layer so they will survive a periodic sleep.
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_ENABLE_NMEA_BBR), _message_VALSET_ENABLE_NMEA_BBR);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to enable messages for M10 GPS BBR.\n");
+                }
+                delay(250);
+                // Next enable wanted NMEA messages in RAM layer
+                msglen = makeUBXPacket(0x06, 0x8A, sizeof(_message_VALSET_ENABLE_NMEA_RAM), _message_VALSET_ENABLE_NMEA_RAM);
+                _serial_gps->write(UBXscratch, msglen);
+                if (getACK(0x06, 0x8A, 300) != GNSS_RESPONSE_OK) {
+                    LOG_WARN("Unable to enable messages for M10 GPS RAM.\n");
+                }
+                // As the M10 has no flash, the best we can do to preserve the config is to set it in RAM and BBR.
+                // BBR will survive a restart, and power off for a while, but modules with small backup
+                // batteries or super caps will not retain the config for a long power off time.
             }
-            // The T-beam 1.2 has issues.
-            if (!(isProblematicGPS)) {
             msglen = makeUBXPacket(0x06, 0x09, sizeof(_message_SAVE), _message_SAVE);
             _serial_gps->write(UBXscratch, msglen);
-                if (getACK(0x06, 0x09, 300) != GNSS_RESPONSE_OK) {
+            if (getACK(0x06, 0x09, 2000) != GNSS_RESPONSE_OK) {
                 LOG_WARN("Unable to save GNSS module configuration.\n");
             } else {
                 LOG_INFO("GNSS module configuration saved!\n");
             }
         }
-        }
         didSerialInit = true;
     }
 
@@ -504,17 +798,27 @@ void GPS::setGPSPower(bool on, bool standbyOnly, uint32_t sleepTime)
         return;
     }
 #endif
-#ifdef PIN_GPS_STANDBY // Specifically the standby pin for L76K and clones
+#ifdef PIN_GPS_STANDBY // Specifically the standby pin for L76B, L76K and clones
     if (on) {
-        LOG_INFO("Waking GPS");
+        LOG_INFO("Waking GPS\n");
         pinMode(PIN_GPS_STANDBY, OUTPUT);
+        // Some PCB's use an inverse logic due to a transistor driver
+        // Example for this is the Pico-Waveshare Lora+GPS HAT
+#ifdef PIN_GPS_STANDBY_INVERTED
+        digitalWrite(PIN_GPS_STANDBY, 0);
+#else
         digitalWrite(PIN_GPS_STANDBY, 1);
+#endif
         return;
     } else {
-        LOG_INFO("GPS entering sleep");
+        LOG_INFO("GPS entering sleep\n");
         // notifyGPSSleep.notifyObservers(NULL);
         pinMode(PIN_GPS_STANDBY, OUTPUT);
+#ifdef PIN_GPS_STANDBY_INVERTED
+        digitalWrite(PIN_GPS_STANDBY, 1);
+#else
         digitalWrite(PIN_GPS_STANDBY, 0);
+#endif
         return;
     }
 #endif
@@ -522,10 +826,17 @@ void GPS::setGPSPower(bool on, bool standbyOnly, uint32_t sleepTime)
         if (gnssModel == GNSS_MODEL_UBLOX) {
             uint8_t msglen;
             LOG_DEBUG("Sleep Time: %i\n", sleepTime);
+            if (strncmp(info.hwVersion, "000A0000", 8) != 0) {
                 for (int i = 0; i < 4; i++) {
                     gps->_message_PMREQ[0 + i] = sleepTime >> (i * 8); // Encode the sleep time in millis into the packet
                 }
-            msglen = gps->makeUBXPacket(0x02, 0x41, 0x08, gps->_message_PMREQ);
+                msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ), gps->_message_PMREQ);
+            } else {
+                for (int i = 0; i < 4; i++) {
+                    gps->_message_PMREQ_10[4 + i] = sleepTime >> (i * 8); // Encode the sleep time in millis into the packet
+                }
+                msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ_10), gps->_message_PMREQ_10);
+            }
             gps->_serial_gps->write(gps->UBXscratch, msglen);
         }
     } else {
@@ -601,7 +912,7 @@ uint32_t GPS::getWakeTime() const
     if (t == UINT32_MAX)
         return t; // already maxint
 
-    return getConfiguredOrDefaultMs(t, default_broadcast_interval_secs);
+    return Default::getConfiguredOrDefaultMs(t, default_broadcast_interval_secs);
 }
 
 /** Get how long we should sleep between aqusition attempts in msecs
@@ -611,13 +922,13 @@ uint32_t GPS::getSleepTime() const
     uint32_t t = config.position.gps_update_interval;
 
     // We'll not need the GPS thread to wake up again after first acq. with fixed position.
-    if (!config.position.gps_enabled || config.position.fixed_position)
+    if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED || config.position.fixed_position)
         t = UINT32_MAX; // Sleep forever now
 
     if (t == UINT32_MAX)
         return t; // already maxint
 
-    return t * 1000;
+    return Default::getConfiguredOrDefaultMs(t, default_gps_update_interval);
 }
 
 void GPS::publishUpdate()
@@ -632,21 +943,24 @@ void GPS::publishUpdate()
         // Notify any status instances that are observing us
         const meshtastic::GPSStatus status = meshtastic::GPSStatus(hasValidLocation, isConnected(), isPowerSaving(), p);
         newStatus.notifyObservers(&status);
-        if (config.position.gps_enabled)
+        if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
             positionModule->handleNewPosition();
         }
+    }
 }
 
 int32_t GPS::runOnce()
 {
     if (!GPSInitFinished) {
-        if (!_serial_gps)
+        if (!_serial_gps || config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) {
+            LOG_INFO("GPS set to not-present. Skipping probe.\n");
             return disable();
+        }
         if (!setup())
             return 2000; // Setup failed, re-run in two seconds
 
         // We have now loaded our saved preferences from flash
-        if (config.position.gps_enabled == false) {
+        if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
             return disable();
         }
         // ONCE we will factory reset the GPS for bug #327
@@ -654,7 +968,7 @@ int32_t GPS::runOnce()
             LOG_WARN("GPS FactoryReset requested\n");
             if (gps->factoryReset()) { // If we don't succeed try again next time
                 devicestate.did_gps_reset = true;
-                nodeDB.saveToDisk(SEGMENT_DEVICESTATE);
+                nodeDB->saveToDisk(SEGMENT_DEVICESTATE);
             }
         }
         GPSInitFinished = true;
@@ -669,12 +983,12 @@ int32_t GPS::runOnce()
         // if we have received valid NMEA claim we are connected
         setConnected();
     } else {
-        if ((config.position.gps_enabled == 1) && (gnssModel == GNSS_MODEL_UBLOX)) {
+        if ((config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) && (gnssModel == GNSS_MODEL_UBLOX)) {
             // reset the GPS on next bootup
             if (devicestate.did_gps_reset && (millis() - lastWakeStartMsec > 60000) && !hasFlow()) {
                 LOG_DEBUG("GPS is not communicating, trying factory reset on next bootup.\n");
                 devicestate.did_gps_reset = false;
-                nodeDB.saveDeviceStateToDisk();
+                nodeDB->saveDeviceStateToDisk();
                 return disable(); // Stop the GPS thread as it can do nothing useful until next reboot.
             }
         }
@@ -682,7 +996,8 @@ int32_t GPS::runOnce()
     // At least one GPS has a bad habit of losing its mind from time to time
     if (rebootsSeen > 2) {
         rebootsSeen = 0;
-        gps->factoryReset();
+        LOG_DEBUG("Would normally factoryReset()\n");
+        // gps->factoryReset();
     }
 
     // If we are overdue for an update, turn on the GPS and at least publish the current status
@@ -784,10 +1099,18 @@ GnssModel_t GPS::probe(int serialSpeed)
     uint8_t buffer[768] = {0};
     delay(100);
 
-    // Close all NMEA sentences , Only valid for MTK platform
+    // Close all NMEA sentences, valid for L76K, ATGM336H (and likely other AT6558 devices)
     _serial_gps->write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
     delay(20);
 
+    // Get version information
+    clearBuffer();
+    _serial_gps->write("$PCAS06,1*1A\r\n");
+    if (getACK("$GPTXT,01,01,02,HW=ATGM336H", 500) == GNSS_RESPONSE_OK) {
+        LOG_INFO("ATGM336H GNSS init succeeded, using ATGM336H Module\n");
+        return GNSS_MODEL_ATGM336H;
+    }
+
     // Get version information
     clearBuffer();
     _serial_gps->write("$PCAS06,0*1B\r\n");
@@ -796,6 +1119,18 @@ GnssModel_t GPS::probe(int serialSpeed)
         return GNSS_MODEL_MTK;
     }
 
+    // Close all NMEA sentences, valid for L76B MTK platform (Waveshare Pico GPS)
+    _serial_gps->write("$PMTK514,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*2E\r\n");
+    delay(20);
+
+    // Get version information
+    clearBuffer();
+    _serial_gps->write("$PMTK605*31\r\n");
+    if (getACK("Quectel-L76B", 500) == GNSS_RESPONSE_OK) {
+        LOG_INFO("L76B GNSS init succeeded, using L76B GNSS Module\n");
+        return GNSS_MODEL_MTK_L76B;
+    }
+
     uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00};
     UBXChecksum(cfg_rate, sizeof(cfg_rate));
     clearBuffer();
@@ -881,9 +1216,9 @@ GnssModel_t GPS::probe(int serialSpeed)
                 strncpy((char *)buffer, &(info.extension[i][4]), sizeof(buffer));
                 // LOG_DEBUG("GetModel:%s\n", (char *)buffer);
                 if (strlen((char *)buffer)) {
-                    LOG_INFO("UBlox GNSS init succeeded, using UBlox %s GNSS Module\n", (char *)buffer);
+                    LOG_INFO("UBlox GNSS probe succeeded, using UBlox %s GNSS Module\n", (char *)buffer);
                 } else {
-                    LOG_INFO("UBlox GNSS init succeeded, using UBlox GNSS Module\n");
+                    LOG_INFO("UBlox GNSS probe succeeded, using UBlox GNSS Module\n");
                 }
             } else if (!strncmp(info.extension[i], "PROTVER", 7)) {
                 char *ptr = nullptr;
@@ -908,7 +1243,7 @@ GPS *GPS::createGps()
     int8_t _rx_gpio = config.position.rx_gpio;
     int8_t _tx_gpio = config.position.tx_gpio;
     int8_t _en_gpio = config.position.gps_en_gpio;
-#if defined(HAS_GPS) && !defined(ARCH_ESP32)
+#if HAS_GPS && !defined(ARCH_ESP32)
     _rx_gpio = 1; // We only specify GPS serial ports on ESP32. Otherwise, these are just flags.
     _tx_gpio = 1;
 #endif
@@ -924,7 +1259,7 @@ GPS *GPS::createGps()
     if (!_en_gpio)
         _en_gpio = PIN_GPS_EN;
 #endif
-#ifdef ARCH_RASPBERRY_PI
+#ifdef ARCH_PORTDUINO
     if (!settingsMap[has_gps])
         return nullptr;
 #endif
@@ -977,7 +1312,6 @@ GPS *GPS::createGps()
         LOG_DEBUG("Using GPIO%d for GPS RX\n", new_gps->rx_gpio);
         LOG_DEBUG("Using GPIO%d for GPS TX\n", new_gps->tx_gpio);
         _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio);
-
 #else
         _serial_gps->begin(GPS_BAUDRATE);
 #endif
@@ -1036,7 +1370,21 @@ bool GPS::factoryReset()
         // byte _message_CFG_RST_COLDSTART[] = {0xB5, 0x62, 0x06, 0x04, 0x04, 0x00, 0xFF, 0xB9, 0x00, 0x00, 0xC6, 0x8B};
         // _serial_gps->write(_message_CFG_RST_COLDSTART, sizeof(_message_CFG_RST_COLDSTART));
         // delay(1000);
+    } else if (gnssModel == GNSS_MODEL_MTK) {
+        // send the CAS10 to perform a factory restart of the device (and other device that support PCAS statements)
+        LOG_INFO("GNSS Factory Reset via PCAS10,3\n");
+        _serial_gps->write("$PCAS10,3*1F\r\n");
+        delay(100);
+    } else if (gnssModel == GNSS_MODEL_ATGM336H) {
+        LOG_INFO("Factory Reset via CAS-CFG-RST\n");
+        uint8_t msglen = makeCASPacket(0x06, 0x02, sizeof(_message_CAS_CFG_RST_FACTORY), _message_CAS_CFG_RST_FACTORY);
+        _serial_gps->write(UBXscratch, msglen);
+        delay(100);
     } else {
+        // fire this for good measure, if we have an L76B - won't harm other devices.
+        _serial_gps->write("$PMTK104*37\r\n");
+        // No PMTK_ACK for this command.
+        delay(100);
         // send the UBLOX Factory Reset Command regardless of detect state, something is very wrong, just assume it's UBLOX.
         // Factory Reset
         byte _message_reset[] = {0xB5, 0x62, 0x06, 0x09, 0x0D, 0x00, 0xFF, 0xFB, 0x00, 0x00, 0x00,
@@ -1096,7 +1444,7 @@ bool GPS::lookForLocation()
 
 #ifndef TINYGPS_OPTION_NO_STATISTICS
     if (reader.failedChecksum() > lastChecksumFailCount) {
-        LOG_WARN("Warning, %u new GPS checksum failures, for a total of %u.\n", reader.failedChecksum() - lastChecksumFailCount,
+        LOG_WARN("%u new GPS checksum failures, for a total of %u.\n", reader.failedChecksum() - lastChecksumFailCount,
                  reader.failedChecksum());
         lastChecksumFailCount = reader.failedChecksum();
     }
@@ -1121,6 +1469,10 @@ bool GPS::lookForLocation()
               reader.date.age(), reader.time.age());
 #endif // GPS_EXTRAVERBOSE
 
+    // Is this a new point or are we re-reading the previous one?
+    if (!reader.location.isUpdated() && !reader.altitude.isUpdated())
+        return false;
+
     // check if a complete GPS solution set is available for reading
     //   tinyGPSDatum::age() also includes isValid() test
     // FIXME
@@ -1133,10 +1485,6 @@ bool GPS::lookForLocation()
         return false;
     }
 
-    // Is this a new point or are we re-reading the previous one?
-    if (!reader.location.isUpdated())
-        return false;
-
     // We know the solution is fresh and valid, so just read the data
     auto loc = reader.location.value();
 
@@ -1195,7 +1543,7 @@ bool GPS::lookForLocation()
     t.tm_mon = reader.date.month() - 1;
     t.tm_year = reader.date.year() - 1900;
     t.tm_isdst = false;
-    p.timestamp = mktime(&t);
+    p.timestamp = gm_mktime(&t);
 
     // Nice to have, if available
     if (reader.satellites.isUpdated()) {
@@ -1239,7 +1587,7 @@ bool GPS::hasFlow()
 
 bool GPS::whileIdle()
 {
-    int charsInBuf = 0;
+    unsigned int charsInBuf = 0;
     bool isValid = false;
     if (!isAwake) {
         clearBuffer();
@@ -1287,3 +1635,17 @@ int32_t GPS::disable()
 
     return INT32_MAX;
 }
+
+void GPS::toggleGpsMode()
+{
+    if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
+        config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_DISABLED;
+        LOG_DEBUG("Flag set to false for gps power. GpsMode: DISABLED\n");
+        disable();
+    } else if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_DISABLED) {
+        config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_ENABLED;
+        LOG_DEBUG("Flag set to true to restore power. GpsMode: ENABLED\n");
+        enable();
+    }
+}
+#endif // Exclude GPS

src/gps/GPS.h

@@ -1,4 +1,6 @@
 #pragma once
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_GPS
 
 #include "GPSStatus.h"
 #include "Observer.h"
@@ -21,10 +23,12 @@ struct uBloxGnssModelInfo {
 };
 
 typedef enum {
+    GNSS_MODEL_ATGM336H,
     GNSS_MODEL_MTK,
     GNSS_MODEL_UBLOX,
     GNSS_MODEL_UC6580,
     GNSS_MODEL_UNKNOWN,
+    GNSS_MODEL_MTK_L76B
 } GnssModel_t;
 
 typedef enum {
@@ -92,26 +96,55 @@ class GPS : private concurrency::OSThread
 
   public:
     /** If !NULL we will use this serial port to construct our GPS */
+#if defined(RPI_PICO_WAVESHARE)
+    static SerialUART *_serial_gps;
+#else
     static HardwareSerial *_serial_gps;
-
+#endif
     static uint8_t _message_PMREQ[];
+    static uint8_t _message_PMREQ_10[];
     static const uint8_t _message_CFG_RXM_PSM[];
     static const uint8_t _message_CFG_RXM_ECO[];
     static const uint8_t _message_CFG_PM2[];
     static const uint8_t _message_GNSS_7[];
-    static const uint8_t _message_GNSS[];
-    static const uint8_t _message_JAM[];
+    static const uint8_t _message_GNSS_8[];
+    static const uint8_t _message_JAM_6_7[];
+    static const uint8_t _message_JAM_8[];
     static const uint8_t _message_NAVX5[];
+    static const uint8_t _message_NAVX5_8[];
+    static const uint8_t _message_NMEA[];
+    static const uint8_t _message_DISABLE_TXT_INFO[];
     static const uint8_t _message_1HZ[];
-    static const uint8_t _message_GGL[];
+    static const uint8_t _message_GLL[];
     static const uint8_t _message_GSA[];
     static const uint8_t _message_GSV[];
     static const uint8_t _message_VTG[];
     static const uint8_t _message_RMC[];
+    static const uint8_t _message_AID[];
     static const uint8_t _message_GGA[];
     static const uint8_t _message_PMS[];
     static const uint8_t _message_SAVE[];
 
+    // VALSET Commands for M10
+    static const uint8_t _message_VALSET_PM[];
+    static const uint8_t _message_VALSET_PM_RAM[];
+    static const uint8_t _message_VALSET_PM_BBR[];
+    static const uint8_t _message_VALSET_ITFM_RAM[];
+    static const uint8_t _message_VALSET_ITFM_BBR[];
+    static const uint8_t _message_VALSET_DISABLE_NMEA_RAM[];
+    static const uint8_t _message_VALSET_DISABLE_NMEA_BBR[];
+    static const uint8_t _message_VALSET_DISABLE_TXT_INFO_RAM[];
+    static const uint8_t _message_VALSET_DISABLE_TXT_INFO_BBR[];
+    static const uint8_t _message_VALSET_ENABLE_NMEA_RAM[];
+    static const uint8_t _message_VALSET_ENABLE_NMEA_BBR[];
+    static const uint8_t _message_VALSET_DISABLE_SBAS_RAM[];
+    static const uint8_t _message_VALSET_DISABLE_SBAS_BBR[];
+
+    // CASIC commands for ATGM336H
+    static const uint8_t _message_CAS_CFG_RST_FACTORY[];
+    static const uint8_t _message_CAS_CFG_NAVX_CONF[];
+    static const uint8_t _message_CAS_CFG_RATE_1HZ[];
+
     meshtastic_Position p = meshtastic_Position_init_default;
 
     GPS() : concurrency::OSThread("GPS") {}
@@ -132,6 +165,9 @@ class GPS : private concurrency::OSThread
     // Disable the thread
     int32_t disable() override;
 
+    // toggle between enabled/disabled
+    void toggleGpsMode();
+
     void setGPSPower(bool on, bool standbyOnly, uint32_t sleepTime);
 
     /// Returns true if we have acquired GPS lock.
@@ -143,13 +179,14 @@ class GPS : private concurrency::OSThread
     /// Return true if we are connected to a GPS
     bool isConnected() const { return hasGPS; }
 
-    bool isPowerSaving() const { return !config.position.gps_enabled; }
+    bool isPowerSaving() const { return config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED; }
 
     // Empty the input buffer as quickly as possible
     void clearBuffer();
 
     // Create a ublox packet for editing in memory
     uint8_t makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
+    uint8_t makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg);
 
     // scratch space for creating ublox packets
     uint8_t UBXscratch[250] = {0};
@@ -160,6 +197,8 @@ class GPS : private concurrency::OSThread
     GPS_RESPONSE getACK(uint8_t c, uint8_t i, uint32_t waitMillis);
     GPS_RESPONSE getACK(const char *message, uint32_t waitMillis);
 
+    GPS_RESPONSE getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis);
+
     /**
      * Switch the GPS into a mode where we are actively looking for a lock, or alternatively switch GPS into a low power mode
      *
@@ -219,6 +258,7 @@ class GPS : private concurrency::OSThread
 
     // Calculate checksum
     void UBXChecksum(uint8_t *message, size_t length);
+    void CASChecksum(uint8_t *message, size_t length);
 
     /** Get how long we should stay looking for each aquisition
      */
@@ -247,3 +287,4 @@ class GPS : private concurrency::OSThread
 };
 
 extern GPS *gps;
+#endif // Exclude GPS

src/gps/GeoCoord.cpp

@@ -376,14 +376,17 @@ void GeoCoord::convertWGS84ToOSGB36(const double lat, const double lon, double &
 }
 
 /// Ported from my old java code, returns distance in meters along the globe
-/// surface (by magic?)
+/// surface (by Haversine formula)
 float GeoCoord::latLongToMeter(double lat_a, double lng_a, double lat_b, double lng_b)
 {
-    double pk = (180 / 3.14169);
-    double a1 = lat_a / pk;
-    double a2 = lng_a / pk;
-    double b1 = lat_b / pk;
-    double b2 = lng_b / pk;
+    // Don't do math if the points are the same
+    if (lat_a == lat_b && lng_a == lng_b)
+        return 0.0;
+
+    double a1 = lat_a / DEG_CONVERT;
+    double a2 = lng_a / DEG_CONVERT;
+    double b1 = lat_b / DEG_CONVERT;
+    double b2 = lng_b / DEG_CONVERT;
     double cos_b1 = cos(b1);
     double cos_a1 = cos(a1);
     double t1 = cos_a1 * cos(a2) * cos_b1 * cos(b2);

src/gps/GeoCoord.h

@@ -11,6 +11,7 @@
 
 #define PI 3.1415926535897932384626433832795
 #define OLC_CODE_LEN 11
+#define DEG_CONVERT (180 / PI)
 
 // Helper functions
 // Raises a number to an exponent, handling negative exponents.

src/gps/NMEAWPL.cpp

@@ -1,3 +1,4 @@
+#if !MESHTASTIC_EXCLUDE_GPS
 #include "NMEAWPL.h"
 #include "GeoCoord.h"
 #include "RTC.h"
@@ -74,10 +75,10 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_Position &pos, const
 uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos)
 {
     GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude);
-    tm *t = localtime((time_t *)&pos.timestamp);
+    tm *t = gmtime((time_t *)&pos.timestamp);
     if (getRTCQuality() > 0) { // use the device clock if we got time from somewhere. If not, use the GPS timestamp.
         uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice);
-        t = localtime((time_t *)&rtc_sec);
+        t = gmtime((time_t *)&rtc_sec);
     }
 
     uint32_t len = snprintf(
@@ -94,3 +95,5 @@ uint32_t printGGA(char *buf, size_t bufsz, const meshtastic_Position &pos)
     len += snprintf(buf + len, bufsz - len, "*%02X\r\n", chk);
     return len;
 }
+
+#endif

src/gps/RTC.cpp

@@ -40,7 +40,7 @@ void readFromRTC()
         t.tm_hour = rtc.getHour();
         t.tm_min = rtc.getMinute();
         t.tm_sec = rtc.getSecond();
-        tv.tv_sec = mktime(&t);
+        tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
         LOG_DEBUG("Read RTC time from RV3028 as %ld\n", tv.tv_sec);
         timeStartMsec = now;
@@ -68,7 +68,7 @@ void readFromRTC()
         t.tm_hour = tc.hour;
         t.tm_min = tc.minute;
         t.tm_sec = tc.second;
-        tv.tv_sec = mktime(&t);
+        tv.tv_sec = gm_mktime(&t);
         tv.tv_usec = 0;
         LOG_DEBUG("Read RTC time from PCF8563 as %ld\n", tv.tv_sec);
         timeStartMsec = now;
@@ -96,21 +96,27 @@ void readFromRTC()
  *
  * If we haven't yet set our RTC this boot, set it from a GPS derived time
  */
-bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
+bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate)
 {
     static uint32_t lastSetMsec = 0;
     uint32_t now = millis();
 
     bool shouldSet;
-    if (q > currentQuality) {
+    if (forceUpdate) {
         shouldSet = true;
-        LOG_DEBUG("Upgrading time to quality %d\n", q);
-    } else if (q == RTCQualityGPS && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
-        // Every 12 hrs we will slam in a new GPS time, to correct for local RTC clock drift
+        LOG_DEBUG("Overriding current RTC quality (%s) with incoming time of RTC quality of %s\n", RtcName(currentQuality),
+                  RtcName(q));
+    } else if (q > currentQuality) {
+        shouldSet = true;
+        LOG_DEBUG("Upgrading time to quality %s\n", RtcName(q));
+    } else if (q >= RTCQualityNTP && (now - lastSetMsec) > (12 * 60 * 60 * 1000UL)) {
+        // Every 12 hrs we will slam in a new GPS or Phone GPS / NTP time, to correct for local RTC clock drift
         shouldSet = true;
         LOG_DEBUG("Reapplying external time to correct clock drift %ld secs\n", tv->tv_sec);
-    } else
+    } else {
         shouldSet = false;
+        LOG_DEBUG("Current RTC quality: %s. Ignoring time of RTC quality of %s\n", RtcName(currentQuality), RtcName(q));
+    }
 
     if (shouldSet) {
         currentQuality = q;
@@ -128,7 +134,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 #else
             rtc.initI2C();
 #endif
-            tm *t = localtime(&tv->tv_sec);
+            tm *t = gmtime(&tv->tv_sec);
             rtc.setTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_wday, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             LOG_DEBUG("RV3028_RTC setTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
@@ -142,7 +148,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
 #else
             rtc.begin();
 #endif
-            tm *t = localtime(&tv->tv_sec);
+            tm *t = gmtime(&tv->tv_sec);
             rtc.setDateTime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
             LOG_DEBUG("PCF8563_RTC setDateTime %02d-%02d-%02d %02d:%02d:%02d %ld\n", t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
                       t->tm_hour, t->tm_min, t->tm_sec, tv->tv_sec);
@@ -162,6 +168,24 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv)
     }
 }
 
+const char *RtcName(RTCQuality quality)
+{
+    switch (quality) {
+    case RTCQualityNone:
+        return "None";
+    case RTCQualityDevice:
+        return "Device";
+    case RTCQualityFromNet:
+        return "Net";
+    case RTCQualityNTP:
+        return "NTP";
+    case RTCQualityGPS:
+        return "GPS";
+    default:
+        return "Unknown";
+    }
+}
+
 /**
  * Sets the RTC time if the provided time is of higher quality than the current RTC time.
  *
@@ -175,7 +199,9 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, 1970
     (midnight UTC/GMT), not counting leap seconds (in ISO 8601: 1970-01-01T00:00:00Z).
     */
-    time_t res = mktime(&t);
+    // horrible hack to make mktime TZ agnostic - best practise according to
+    // https://www.gnu.org/software/libc/manual/html_node/Broken_002ddown-Time.html
+    time_t res = gm_mktime(&t);
     struct timeval tv;
     tv.tv_sec = res;
     tv.tv_usec = 0; // time.centisecond() * (10 / 1000);
@@ -189,14 +215,32 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t)
     }
 }
 
+/**
+ * Returns the timezone offset in seconds.
+ *
+ * @return The timezone offset in seconds.
+ */
+int32_t getTZOffset()
+{
+    time_t now = getTime(false);
+    struct tm *gmt;
+    gmt = gmtime(&now);
+    gmt->tm_isdst = -1;
+    return (int32_t)difftime(now, mktime(gmt));
+}
+
 /**
  * Returns the current time in seconds since the Unix epoch (January 1, 1970).
  *
  * @return The current time in seconds since the Unix epoch.
  */
-uint32_t getTime()
+uint32_t getTime(bool local)
 {
+    if (local) {
+        return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs + getTZOffset();
+    } else {
         return (((uint32_t)millis() - timeStartMsec) / 1000) + zeroOffsetSecs;
+    }
 }
 
 /**
@@ -205,7 +249,19 @@ uint32_t getTime()
  * @param minQuality The minimum quality of the RTC time required for it to be considered valid.
  * @return The current time from the RTC if it meets the minimum quality requirement, or 0 if the time is not valid.
  */
-uint32_t getValidTime(RTCQuality minQuality)
+uint32_t getValidTime(RTCQuality minQuality, bool local)
 {
-    return (currentQuality >= minQuality) ? getTime() : 0;
+    return (currentQuality >= minQuality) ? getTime(local) : 0;
+}
+
+time_t gm_mktime(struct tm *tm)
+{
+    setenv("TZ", "GMT0", 1);
+    time_t res = mktime(tm);
+    if (*config.device.tzdef) {
+        setenv("TZ", config.device.tzdef, 1);
+    } else {
+        setenv("TZ", "UTC0", 1);
+    }
+    return res;
 }

src/gps/RTC.h

@@ -25,17 +25,22 @@ enum RTCQuality {
 RTCQuality getRTCQuality();
 
 /// If we haven't yet set our RTC this boot, set it from a GPS derived time
-bool perhapsSetRTC(RTCQuality q, const struct timeval *tv);
+bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate = false);
 bool perhapsSetRTC(RTCQuality q, struct tm &t);
 
+/// Return a string name for the quality
+const char *RtcName(RTCQuality quality);
+
 /// Return time since 1970 in secs.  While quality is RTCQualityNone we will be returning time based at zero
-uint32_t getTime();
+uint32_t getTime(bool local = false);
 
 /// Return time since 1970 in secs.  If quality is RTCQualityNone return zero
-uint32_t getValidTime(RTCQuality minQuality);
+uint32_t getValidTime(RTCQuality minQuality, bool local = false);
 
 void readFromRTC();
 
+time_t gm_mktime(struct tm *tm);
+
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60

src/gps/cas.h

@@ -0,0 +1,63 @@
+#pragma once
+
+// CASIC binary message definitions
+// Reference: https://www.icofchina.com/d/file/xiazai/2020-09-22/20f1b42b3a11ac52089caf3603b43fb5.pdf
+// ATGM33H-5N: https://www.icofchina.com/pro/mokuai/2016-08-01/4.html
+// (https://www.icofchina.com/d/file/xiazai/2016-12-05/b5c57074f4b1fcc62ba8c7868548d18a.pdf)
+
+// NEMA (Class ID - 0x4e) message IDs
+#define CAS_NEMA_GGA 0x00
+#define CAS_NEMA_GLL 0x01
+#define CAS_NEMA_GSA 0x02
+#define CAS_NEMA_GSV 0x03
+#define CAS_NEMA_RMC 0x04
+#define CAS_NEMA_VTG 0x05
+#define CAS_NEMA_GST 0x07
+#define CAS_NEMA_ZDA 0x08
+#define CAS_NEMA_DHV 0x0D
+
+// Size of a CAS-ACK-(N)ACK message (14 bytes)
+#define CAS_ACK_NACK_MSG_SIZE 0x0E
+
+// CFG-RST (0x06, 0x02)
+// Factory reset
+const uint8_t GPS::_message_CAS_CFG_RST_FACTORY[] = {
+    0xFF, 0x03, // Fields to clear
+    0x01,       // Reset Mode: Controlled Software reset
+    0x03        // Startup Mode: Factory
+};
+
+// CFG_RATE (0x06, 0x01)
+// 1HZ update rate, this should always be the case after
+// factory reset but update it regardless
+const uint8_t GPS::_message_CAS_CFG_RATE_1HZ[] = {
+    0xE8, 0x03, // Update Rate: 0x03E8 = 1000ms
+    0x00, 0x00  // Reserved
+};
+
+// CFG-NAVX (0x06, 0x07)
+// Initial ATGM33H-5N configuration, Updates for Dynamic Mode, Fix Mode, and SV system
+// Qwirk: The ATGM33H-5N-31 should only support GPS+BDS, however it will happily enable
+//  and use GPS+BDS+GLONASS iff the correct CFG_NAVX command is used.
+const uint8_t GPS::_message_CAS_CFG_NAVX_CONF[] = {
+    0x03, 0x01, 0x00, 0x00, // Update Mask: Dynamic Mode, Fix Mode, Nav Settings
+    0x03,                   // Dynamic Mode: Automotive
+    0x03,                   // Fix Mode: Auto 2D/3D
+    0x00,                   // Min SV
+    0x00,                   // Max SVs
+    0x00,                   // Min CNO
+    0x00,                   // Reserved1
+    0x00,                   // Init 3D fix
+    0x00,                   // Min Elevation
+    0x00,                   // Dr Limit
+    0x07,                   // Nav System: 2^0 = GPS, 2^1 = BDS 2^2 = GLONASS: 2^3
+                            // 3=GPS+BDS, 7=GPS+BDS+GLONASS
+    0x00, 0x00,             // Rollover Week
+    0x00, 0x00, 0x00, 0x00, // Fix Altitude
+    0x00, 0x00, 0x00, 0x00, // Fix Height Error
+    0x00, 0x00, 0x00, 0x00, // PDOP Maximum
+    0x00, 0x00, 0x00, 0x00, // TDOP Maximum
+    0x00, 0x00, 0x00, 0x00, // Position Accuracy Max
+    0x00, 0x00, 0x00, 0x00, // Time Accuracy Max
+    0x00, 0x00, 0x00, 0x00  // Static Hold Threshold
+};

src/gps/ubx.h

@@ -1,8 +1,16 @@
+// Power Management
+
 uint8_t GPS::_message_PMREQ[] PROGMEM = {
-    0x00, 0x00, // 4 bytes duration of request task
-    0x00, 0x00, // (milliseconds)
-    0x02, 0x00, // Task flag bitfield
-    0x00, 0x00  // byte index 1 = sleep mode
+    0x00, 0x00, 0x00, 0x00, // 4 bytes duration of request task (milliseconds)
+    0x02, 0x00, 0x00, 0x00  // Bitfield, set backup = 1
+};
+
+uint8_t GPS::_message_PMREQ_10[] PROGMEM = {
+    0x00,                   // version (0 for this version)
+    0x00, 0x00, 0x00,       // Reserved 1
+    0x00, 0x00, 0x00, 0x00, // 4 bytes duration of request task (milliseconds)
+    0x06, 0x00, 0x00, 0x00, // Bitfield, set backup =1 and force =1
+    0x08, 0x00, 0x00, 0x00  // wakeupSources Wake on uartrx
 };
 
 const uint8_t GPS::_message_CFG_RXM_PSM[] PROGMEM = {
@@ -10,26 +18,37 @@ const uint8_t GPS::_message_CFG_RXM_PSM[] PROGMEM = {
     0x01  // Power save mode
 };
 
+// only for Neo-6
 const uint8_t GPS::_message_CFG_RXM_ECO[] PROGMEM = {
     0x08, // Reserved
     0x04  // eco mode
 };
 
 const uint8_t GPS::_message_CFG_PM2[] PROGMEM = {
-    0x01, 0x06, 0x00, 0x00, // version, Reserved
-    0x0E, 0x81, 0x43, 0x01, // flags
+    0x01,                   // version
+    0x00,                   // Reserved 1, set to 0x06 by u-Center
+    0x00,                   // Reserved 2
+    0x00,                   // Reserved 1
+    0x00, 0x11, 0x03, 0x00, // flags-> cyclic mode, wait for normal fix ok, do not wake to update RTC, doNotEnterOff,
+                            // LimitPeakCurrent
     0xE8, 0x03, 0x00, 0x00, // update period 1000 ms
     0x10, 0x27, 0x00, 0x00, // search period 10s
-    0x00, 0x00, 0x00, 0x00, // Grod offset 0
+    0x00, 0x00, 0x00, 0x00, // Grid offset 0
     0x01, 0x00,             // onTime 1 second
     0x00, 0x00,             // min search time 0
-    0x2C, 0x01,             // reserved
-    0x00, 0x00, 0x4F, 0xC1, // reserved
-    0x03, 0x00, 0x87, 0x02, // reserved
-    0x00, 0x00, 0xFF, 0x00, // reserved
-    0x01, 0x00, 0xD6, 0x4D  // reserved
+    0x00, 0x00,             // 0x2C, 0x01,  // reserved 4
+    0x00, 0x00,             // 0x00, 0x00,  // reserved 5
+    0x00, 0x00, 0x00, 0x00, // 0x4F, 0xC1, 0x03, 0x00, // reserved 6
+    0x00, 0x00, 0x00, 0x00, // 0x87, 0x02, 0x00, 0x00, // reserved 7
+    0x00,                   // 0xFF,        // reserved 8
+    0x00,                   // 0x00,        // reserved 9
+    0x00, 0x00,             // 0x00, 0x00,  // reserved 10
+    0x00, 0x00, 0x00, 0x00  // 0x64, 0x40, 0x01, 0x00  // reserved 11
 };
 
+// Constallation setup, none required for Neo-6
+
+// For Neo-7 GPS & SBAS
 const uint8_t GPS::_message_GNSS_7[] = {
     0x00, // msgVer (0 for this version)
     0x00, // numTrkChHw (max number of hardware channels, read only, so it's always 0)
@@ -46,123 +65,228 @@ const uint8_t GPS::_message_GNSS_7[] = {
 // to overwrite a saved state with identical values, no ACK/NAK is received, contrary to
 // what is specified in the Ublox documentation.
 // There is also a possibility that the module may be GPS-only.
-const uint8_t GPS::_message_GNSS[] = {
+
+// For M8 GPS, GLONASS, Galileo, SBAS, QZSS
+const uint8_t GPS::_message_GNSS_8[] = {
     0x00,                                           // msgVer (0 for this version)
     0x00,                                           // numTrkChHw (max number of hardware channels, read only, so it's always 0)
     0xff,                                           // numTrkChUse (max number of channels to use, 0xff = max available)
-    0x03, // numConfigBlocks (number of GNSS systems), most modules support maximum 3 GNSS systems
+    0x05,                                           // numConfigBlocks (number of GNSS systems)
                                                     // GNSS config format: gnssId, resTrkCh, maxTrkCh, reserved1, flags
     0x00, 0x08, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, // GPS
     0x01, 0x01, 0x03, 0x00, 0x01, 0x00, 0x01, 0x01, // SBAS
-    0x06, 0x08, 0x0e, 0x00, 0x01, 0x00, 0x01, 0x01  // GLONASS
+    0x02, 0x04, 0x08, 0x00, 0x01, 0x00, 0x01, 0x01, // Galileo
+    0x05, 0x00, 0x03, 0x00, 0x01, 0x00, 0x01, 0x01, // QZSS
+    0x06, 0x08, 0x0E, 0x00, 0x01, 0x00, 0x01, 0x01  // GLONASS
+};
+/*
+// For M8 GPS, GLONASS, BeiDou, SBAS, QZSS
+const uint8_t GPS::_message_GNSS_8_B[] = {
+ 0x00, // msgVer (0 for this version)
+ 0x00, // numTrkChHw (max number of hardware channels, read only, so it's always 0)
+ 0xff, // numTrkChUse (max number of channels to use, 0xff = max available) read only for protocol >23
+ 0x05, // numConfigBlocks (number of GNSS systems)
+       // GNSS config format: gnssId, resTrkCh, maxTrkCh, reserved1, flags
+ 0x00, 0x08, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, // GPS
+ 0x01, 0x01, 0x03, 0x00, 0x01, 0x00, 0x01, 0x01, // SBAS
+ 0x03, 0x08, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, // BeiDou
+ 0x05, 0x00, 0x03, 0x00, 0x01, 0x00, 0x01, 0x01, // QZSS
+ 0x06, 0x08, 0x0E, 0x00, 0x01, 0x00, 0x01, 0x01  // GLONASS
+};
+*/
+
+// For M8 we want to enable NMEA version 4.10 messages to allow for Galileo and or BeiDou
+const uint8_t GPS::_message_NMEA[]{
+    0x00,                              // filter flags
+    0x41,                              // NMEA Version
+    0x00,                              // Max number of SVs to report per TaklerId
+    0x02,                              // flags
+    0x00, 0x00, 0x00, 0x00,            // gnssToFilter
+    0x00,                              // svNumbering
+    0x00,                              // mainTalkerId
+    0x00,                              // gsvTalkerId
+    0x01,                              // Message version
+    0x00, 0x00,                        // bdsTalkerId 2 chars 0=default
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // Reserved
+};
+// Enable jamming/interference monitor
+
+// For Neo-6, Max-7 and Neo-7
+const uint8_t GPS::_message_JAM_6_7[] = {
+    0xf3, 0xac, 0x62, 0xad, // config1 bbThreshold = 3, cwThreshold = 15, enable = 1, reserved bits 0x16B156
+    0x1e, 0x03, 0x00, 0x00  // config2 antennaSetting Unknown = 0, reserved 3, = 0x00,0x00, reserved 2 = 0x31E
 };
 
-// Enable interference resistance, because we are using LoRa, WiFi and Bluetooth on same board,
-// and we need to reduce interference from them
-const uint8_t GPS::_message_JAM[] = {
-    // bbThreshold (Broadband jamming detection threshold) is set to 0x3F (63 in decimal)
-    // cwThreshold (CW jamming detection threshold) is set to 0x10 (16 in decimal)
-    // algorithmBits (Reserved algorithm settings) is set to 0x16B156 as recommended
-    // enable (Enable interference detection) is set to 1 (enabled)
-    0x3F, 0x10, 0xB1, 0x56, // config: Interference config word
-    // generalBits (General settings) is set to 0x31E as recommended
-    // antSetting (Antenna setting, 0=unknown, 1=passive, 2=active) is set to 0 (unknown)
-    // ToDo: Set to 1 (passive) or 2 (active) if known, for example from UBX-MON-HW, or from board info
-    // enable2 (Set to 1 to scan auxiliary bands, u-blox 8 / u-blox M8 only, otherwise ignored) is set to 1
-    // (enabled)
-    0x1E, 0x03, 0x00, 0x01 // config2: Extra settings for jamming/interference monitor
+// For M8
+const uint8_t GPS::_message_JAM_8[] = {
+    0xf3, 0xac, 0x62, 0xad, // config1 bbThreshold = 3, cwThreshold = 15, enable1 = 1, reserved bits 0x16B156
+    0x1e, 0x43, 0x00, 0x00  // config2 antennaSetting Unknown = 0, enable2 = 1, generalBits = 0x31E
 };
 
 // Configure navigation engine expert settings:
+// there are many variations of what were Reserved fields for the Neo-6 in later versions
+// ToDo: check UBX-MON-VER for module type and protocol version
+
+// For the Neo-6
 const uint8_t GPS::_message_NAVX5[] = {
     0x00, 0x00,             // msgVer (0 for this version)
-    // minMax flag = 1: apply min/max SVs settings
-    // minCno flag = 1: apply minimum C/N0 setting
-    // initial3dfix flag = 0: apply initial 3D fix settings
-    // aop flag = 1: apply aopCfg (useAOP flag) settings (AssistNow Autonomous)
-    0x1B, 0x00, // mask1 (First parameters bitmask)
-    // adr flag = 0: apply ADR sensor fusion on/off setting (useAdr flag)
-    // If firmware is not ADR/UDR, enabling this flag will fail configuration
-    // ToDo: check this with UBX-MON-VER
-    0x00, 0x00, 0x00, 0x00,             // mask2 (Second parameters bitmask)
-    0x00, 0x00,                         // Reserved
+    0x4c, 0x66,             // mask1
+    0x00, 0x00, 0x00, 0x00, // Reserved 0
+    0x00,                   // Reserved 1
+    0x00,                   // Reserved 2
     0x03,                   // minSVs (Minimum number of satellites for navigation) = 3
     0x10,                   // maxSVs (Maximum number of satellites for navigation) = 16
     0x06,                   // minCNO (Minimum satellite signal level for navigation) = 6 dBHz
-    0x00,                               // Reserved
-    0x00,                               // iniFix3D (Initial fix must be 3D) = 0 (disabled)
-    0x00, 0x00,                         // Reserved
-    0x00,                               // ackAiding (Issue acknowledgements for assistance message input) = 0 (disabled)
-    0x00, 0x00,                         // Reserved
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Reserved
-    0x00,                               // Reserved
+    0x00,                   // Reserved 5
+    0x00,                   // iniFix3D (Initial fix must be 3D) (0 = false 1 = true)
+    0x00,                   // Reserved 6
+    0x00,                   // Reserved 7
+    0x00,                   // Reserved 8
+    0x00, 0x00,             // wknRollover 0 = firmware default
+    0x00, 0x00, 0x00, 0x00, // Reserved 9
+    0x00,                   // Reserved 10
+    0x00,                   // Reserved 11
+    0x00,                   // usePPP (Precice Point Positioning) (0 = false, 1 = true)
+    0x01,                   // useAOP  (AssistNow Autonomous configuration) = 1 (enabled)
+    0x00,                   // Reserved 12
+    0x00,                   // Reserved 13
+    0x00, 0x00,             // aopOrbMaxErr = 0 to reset to firmware default
+    0x00,                   // Reserved 14
+    0x00,                   // Reserved 15
+    0x00, 0x00,             // Reserved 3
+    0x00, 0x00, 0x00, 0x00  // Reserved 4
+};
+// For the M8
+const uint8_t GPS::_message_NAVX5_8[] = {
+    0x02, 0x00,             // msgVer (2 for this version)
+    0x4c, 0x66,             // mask1
+    0x00, 0x00, 0x00, 0x00, // mask2
+    0x00, 0x00,             // Reserved 1
+    0x03,                   // minSVs (Minimum number of satellites for navigation) = 3
+    0x10,                   // maxSVs (Maximum number of satellites for navigation) = 16
+    0x06,                   // minCNO (Minimum satellite signal level for navigation) = 6 dBHz
+    0x00,                   // Reserved 2
+    0x00,                   // iniFix3D (Initial fix must be 3D) (0 = false 1 = true)
+    0x00, 0x00,             // Reserved 3
+    0x00,                   // ackAiding
+    0x00, 0x00,             // wknRollover 0 = firmware default
+    0x00,                   // sigAttenCompMode
+    0x00,                   // Reserved 4
+    0x00, 0x00,             // Reserved 5
+    0x00, 0x00,             // Reserved 6
+    0x00,                   // usePPP (Precice Point Positioning) (0 = false, 1 = true)
     0x01,                   // aopCfg  (AssistNow Autonomous configuration) = 1 (enabled)
-    0x00, 0x00,                         // Reserved
-    0x00, 0x00,                         // Reserved
-    0x00, 0x00, 0x00, 0x00,             // Reserved
-    0x00, 0x00, 0x00,                   // Reserved
-    0x01,                               // useAdr (Enable/disable ADR sensor fusion) = 1 (enabled)
+    0x00, 0x00,             // Reserved 7
+    0x00, 0x00,             // aopOrbMaxErr = 0 to reset to firmware default
+    0x00, 0x00, 0x00, 0x00, // Reserved 8
+    0x00, 0x00, 0x00,       // Reserved 9
+    0x00                    // useAdr
 };
 
 // Set GPS update rate to 1Hz
 // Lowering the update rate helps to save power.
 // Additionally, for some new modules like the M9/M10, an update rate lower than 5Hz
 // is recommended to avoid a known issue with satellites disappearing.
+// The module defaults for M8, M9, M10 are the same as we use here so no update is necessary
 const uint8_t GPS::_message_1HZ[] = {
     0xE8, 0x03, // Measurement Rate (1000ms for 1Hz)
     0x01, 0x00, // Navigation rate, always 1 in GPS mode
-    0x01, 0x00, // Time reference
+    0x01, 0x00  // Time reference
 };
 
-// Disable GGL. GGL - Geographic position (latitude and longitude), which provides the current geographical
+// Disable GLL. GLL - Geographic position (latitude and longitude), which provides the current geographical
 // coordinates.
-const uint8_t GPS::_message_GGL[] = {
+const uint8_t GPS::_message_GLL[] = {
     0xF0, 0x01, // NMEA ID for GLL
-    0x01,                  // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
-    0x00,                  // Disable
-    0x01, 0x01, 0x01, 0x01 // Reserved
+    0x00,       // Rate for DDC
+    0x00,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
 };
 
-// Enable GSA. GSA - GPS DOP and active satellites, used for detailing the satellites used in the positioning and
+// Disable GSA. GSA - GPS DOP and active satellites, used for detailing the satellites used in the positioning and
 // the DOP (Dilution of Precision)
 const uint8_t GPS::_message_GSA[] = {
     0xF0, 0x02, // NMEA ID for GSA
-    0x01,                  // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
-    0x01,                  // Enable
-    0x01, 0x01, 0x01, 0x01 // Reserved
+    0x00,       // Rate for DDC
+    0x00,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB usefull for native linux
+    0x00,       // Rate for SPI
+    0x00        // Reserved
 };
 
 // Disable GSV. GSV - Satellites in view, details the number and location of satellites in view.
 const uint8_t GPS::_message_GSV[] = {
     0xF0, 0x03, // NMEA ID for GSV
-    0x01,                  // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
-    0x00,                  // Disable
-    0x01, 0x01, 0x01, 0x01 // Reserved
+    0x00,       // Rate for DDC
+    0x00,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
 };
 
 // Disable VTG. VTG - Track made good and ground speed, which provides course and speed information relative to
 // the ground.
 const uint8_t GPS::_message_VTG[] = {
     0xF0, 0x05, // NMEA ID for VTG
-    0x01,                  // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
-    0x00,                  // Disable
-    0x01, 0x01, 0x01, 0x01 // Reserved
+    0x00,       // Rate for DDC
+    0x00,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
 };
 
 // Enable RMC. RMC - Recommended Minimum data, the essential gps pvt (position, velocity, time) data.
 const uint8_t GPS::_message_RMC[] = {
     0xF0, 0x04, // NMEA ID for RMC
-    0x01,                  // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
-    0x01,                  // Enable
-    0x01, 0x01, 0x01, 0x01 // Reserved
+    0x00,       // Rate for DDC
+    0x01,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x01,       // Rate for USB usefull for native linux
+    0x00,       // Rate for SPI
+    0x00        // Reserved
 };
 
 // Enable GGA. GGA - Global Positioning System Fix Data, which provides 3D location and accuracy data.
 const uint8_t GPS::_message_GGA[] = {
     0xF0, 0x00, // NMEA ID for GGA
-    0x01,                  // I/O Target 0=I/O, 1=UART1, 2=UART2, 3=USB, 4=SPI
-    0x01,                  // Enable
-    0x01, 0x01, 0x01, 0x01 // Reserved
+    0x00,       // Rate for DDC
+    0x01,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x01,       // Rate for USB, usefull for native linux
+    0x00,       // Rate for SPI
+    0x00        // Reserved
+};
+
+// Disable UBX-AID-ALPSRV as it may confuse TinyGPS. The Neo-6 seems to send this message
+// whether the AID Autonomous is enabled or not
+const uint8_t GPS::_message_AID[] = {
+    0x0B, 0x32, // NMEA ID for UBX-AID-ALPSRV
+    0x00,       // Rate for DDC
+    0x00,       // Rate for UART1
+    0x00,       // Rate for UART2
+    0x00,       // Rate for USB
+    0x00,       // Rate for SPI
+    0x00        // Reserved
+};
+
+// Turn off TEXT INFO Messages for all but M10 series
+
+// B5 62 06 02 0A 00 01 00 00 00 03 03 00 03 03 00 1F 20
+const uint8_t GPS::_message_DISABLE_TXT_INFO[] = {
+    0x01,             // Protocol ID for NMEA
+    0x00, 0x00, 0x00, // Reserved
+    0x03,             // I2C
+    0x03,             // I/O Port 1
+    0x00,             // I/O Port 2
+    0x03,             // USB
+    0x03,             // SPI
+    0x00              // Reserved
 };
 
 // The Power Management configuration allows the GPS module to operate in different power modes for optimized
@@ -176,17 +300,159 @@ const uint8_t GPS::_message_GGA[] = {
 // is set to Interval; otherwise, it must be set to '0'. The 'onTime' field specifies the duration of the ON phase
 // and must be smaller than the period. It is only valid when the powerSetupValue is set to Interval; otherwise,
 // it must be set to '0'.
+// This command applies to M8 products
 const uint8_t GPS::_message_PMS[] = {
     0x00,       // Version (0)
-    0x03,       // Power setup value
+    0x03,       // Power setup value 3 = Agresssive 1Hz
     0x00, 0x00, // period: not applicable, set to 0
     0x00, 0x00, // onTime: not applicable, set to 0
-    0x97, 0x6F  // reserved, generated by u-center
+    0x00, 0x00  // reserved, generated by u-center
 };
 
 const uint8_t GPS::_message_SAVE[] = {
     0x00, 0x00, 0x00, 0x00, // clearMask: no sections cleared
     0xFF, 0xFF, 0x00, 0x00, // saveMask: save all sections
     0x00, 0x00, 0x00, 0x00, // loadMask: no sections loaded
-    0x0F                    // deviceMask: BBR, Flash, EEPROM, and SPI Flash
+    0x17                    // deviceMask: BBR, Flash, EEPROM, and SPI Flash
 };
+
+// As the M10 has no flash, the best we can do to preserve the config is to set it in RAM and BBR.
+// BBR will survive a restart, and power off for a while, but modules with small backup
+// batteries or super caps will not retain the config for a long power off time.
+
+// VALSET Commands for M10
+// Please refer to the M10 Protocol Specification:
+// https://content.u-blox.com/sites/default/files/u-blox-M10-SPG-5.10_InterfaceDescription_UBX-21035062.pdf
+// Where the VALSET/VALGET/VALDEL commands are described in detail.
+// and:
+// https://content.u-blox.com/sites/default/files/u-blox-M10-ROM-5.10_ReleaseNotes_UBX-22001426.pdf
+// for interesting insights.
+/*
+CFG-PM2 has been replaced by many CFG-PM commands
+OPERATEMODE E1 2 (0 | 1 | 2)
+POSUPDATEPERIOD U4 1000ms for M10 must be >= 5s try 5
+ACQPERIOD U4 10 seems ok for M10 def ok
+GRIDOFFSET U4 0 seems ok for M10 def ok
+ONTIME U2 1 will try 1
+MINACQTIME U1 0 will try 0 def ok
+MAXACQTIME U1 stick with default of 0 def ok
+DONOTENTEROFF L 1 stay at 1
+WAITTIMEFIX  L 1 stay with 1
+UPDATEEPH L 1 changed to 1 for gps rework default is 1
+EXTINTWAKE L 0 no ext ints
+EXTINTBACKUP L 0 no ext ints
+EXTINTINACTIVE L 0 no ext ints
+EXTINTACTIVITY U4 0 no ext ints
+LIMITPEAKCURRENT L 1 stay with 1
+*/
+// CFG-PMS has been removed
+
+// Ram layer config message:
+// b5 62 06 8a 26 00 00 01 00 00 01 00 d0 20 02 02 00 d0 40 05 00 00 00 05 00 d0 30 01 00 08 00 d0 10 01 09 00 d0 10 01 10 00 d0
+// 10 01 8b de
+
+// BBR layer config message:
+// b5 62 06 8a 26 00 00 02 00 00 01 00 d0 20 02 02 00 d0 40 05 00 00 00 05 00 d0 30 01 00 08 00 d0 10 01 09 00 d0 10 01 10 00 d0
+// 10 01 8c 03
+
+const uint8_t GPS::_message_VALSET_PM_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0xd0, 0x20, 0x02, 0x02, 0x00, 0xd0, 0x40,
+                                               0x05, 0x00, 0x00, 0x00, 0x05, 0x00, 0xd0, 0x30, 0x01, 0x00, 0x08, 0x00, 0xd0,
+                                               0x10, 0x01, 0x09, 0x00, 0xd0, 0x10, 0x01, 0x10, 0x00, 0xd0, 0x10, 0x01};
+const uint8_t GPS::_message_VALSET_PM_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x01, 0x00, 0xd0, 0x20, 0x02, 0x02, 0x00, 0xd0, 0x40,
+                                               0x05, 0x00, 0x00, 0x00, 0x05, 0x00, 0xd0, 0x30, 0x01, 0x00, 0x08, 0x00, 0xd0,
+                                               0x10, 0x01, 0x09, 0x00, 0xd0, 0x10, 0x01, 0x10, 0x00, 0xd0, 0x10, 0x01};
+
+/*
+CFG-ITFM replaced by 5 valset messages which can be combined into one for RAM and one for BBR
+
+20410001 bbthreshold U1 3
+20410002 cwthreshold U1 15
+1041000d enable L        0 -> 1
+20410010 ant E1          0
+10410013 enable aux L    0 -> 1
+
+
+b5 62 06 8a 0e 00 00 01 00 00 0d 00 41 10 01 13 00 41 10 01 63 c6
+*/
+const uint8_t GPS::_message_VALSET_ITFM_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x0d, 0x00, 0x41,
+                                                 0x10, 0x01, 0x13, 0x00, 0x41, 0x10, 0x01};
+const uint8_t GPS::_message_VALSET_ITFM_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x0d, 0x00, 0x41,
+                                                 0x10, 0x01, 0x13, 0x00, 0x41, 0x10, 0x01};
+
+// Turn off all NMEA messages:
+// Ram layer config message:
+// b5 62 06 8a 22 00 00 01 00 00 c0 00 91 20 00 ca 00 91 20 00 c5 00 91 20 00 ac 00 91 20 00 b1 00 91 20 00 bb 00 91 20 00 40 8f
+
+// Disable GLL, GSV, VTG messages in BBR layer
+// BBR layer config message:
+// b5 62 06 8a 13 00 00 02 00 00 ca 00 91 20 00 c5 00 91 20 00 b1 00 91 20 00 f8 4e
+
+const uint8_t GPS::_message_VALSET_DISABLE_NMEA_RAM[] = {
+    /*0x00, 0x01, 0x00, 0x00, 0xca, 0x00, 0x91, 0x20, 0x00, 0xc5, 0x00, 0x91, 0x20, 0x00, 0xb1, 0x00, 0x91, 0x20, 0x00 */
+    0x00, 0x01, 0x00, 0x00, 0xc0, 0x00, 0x91, 0x20, 0x00, 0xca, 0x00, 0x91, 0x20, 0x00, 0xc5, 0x00, 0x91,
+    0x20, 0x00, 0xac, 0x00, 0x91, 0x20, 0x00, 0xb1, 0x00, 0x91, 0x20, 0x00, 0xbb, 0x00, 0x91, 0x20, 0x00};
+
+const uint8_t GPS::_message_VALSET_DISABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x91, 0x20, 0x00, 0xc5,
+                                                         0x00, 0x91, 0x20, 0x00, 0xb1, 0x00, 0x91, 0x20, 0x00};
+
+// Turn off text info messages:
+// Ram layer config message:
+// b5 62 06 8a 09 00 00 01 00 00 07 00 92 20 06 59 50
+
+// BBR layer config message:
+// b5 62 06 8a 09 00 00 02 00 00 07 00 92 20 06 5a 58
+
+// Turn NMEA GGA, RMC messages on:
+// Layer config messages:
+// RAM:
+// b5 62 06 8a 0e 00 00 01 00 00 bb 00 91 20 01 ac 00 91 20 01 6a 8f
+// BBR:
+// b5 62 06 8a 0e 00 00 02 00 00 bb 00 91 20 01 ac 00 91 20 01 6b 9c
+// FLASH:
+// b5 62 06 8a 0e 00 00 04 00 00 bb 00 91 20 01 ac 00 91 20 01 6d b6
+// Doing this for the FLASH layer isn't really required since we save the config to flash later
+
+const uint8_t GPS::_message_VALSET_DISABLE_TXT_INFO_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x07, 0x00, 0x92, 0x20, 0x03};
+const uint8_t GPS::_message_VALSET_DISABLE_TXT_INFO_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x07, 0x00, 0x92, 0x20, 0x03};
+
+const uint8_t GPS::_message_VALSET_ENABLE_NMEA_RAM[] = {0x00, 0x01, 0x00, 0x00, 0xbb, 0x00, 0x91,
+                                                        0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01};
+const uint8_t GPS::_message_VALSET_ENABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00, 0xbb, 0x00, 0x91,
+                                                        0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01};
+const uint8_t GPS::_message_VALSET_DISABLE_SBAS_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x20, 0x00, 0x31,
+                                                         0x10, 0x00, 0x05, 0x00, 0x31, 0x10, 0x00};
+const uint8_t GPS::_message_VALSET_DISABLE_SBAS_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x20, 0x00, 0x31,
+                                                         0x10, 0x00, 0x05, 0x00, 0x31, 0x10, 0x00};
+
+/*
+Operational issues with the M10:
+
+PowerSave doesn't work with SBAS, seems like you can have SBAS enabled, but it will never lock
+onto the SBAS sats.
+PowerSave doesn't work with BDS B1C, u-blox says use B1l instead.
+BDS B1l cannot be enabled with BDS B1C or GLONASS L1OF, so GLONASS will work with B1C, but not B1l
+So no powersave with GLONASS and BDS B1l enabled.
+So disable GLONASS and use BDS B1l, which is part of the default M10 config.
+
+GNSS configuration:
+
+Default GNSS configuration is: GPS, Galileo, BDS B1l, with QZSS and SBAS enabled.
+The PMREQ puts the receiver to sleep and wakeup re-acquires really fast and seems to not need
+the PM config. Lets try without it.
+PMREQ sort of works with SBAS, but the awake time is too short to re-acquire any SBAS sats.
+The defination of "Got Fix" doesn't seem to include SBAS. Much more too this...
+Even if it was, it can take minutes (up to 12.5),
+even under good sat visability conditions to re-acquire the SBAS data.
+
+Another effect fo the quick transition to sleep is that no other sats will be acquired so the
+sat count will tend to remain at what the initial fix was.
+*/
+
+// GNSS disable SBAS as recommended by u-blox if using GNSS defaults and power save mode
+/*
+Ram layer config message:
+b5 62 06 8a 0e 00 00 01 00 00 20 00 31 10 00 05 00 31 10 00 46 87
+
+BBR layer config message:
+b5 62 06 8a 0e 00 00 02 00 00 20 00 31 10 00 05 00 31 10 00 47 94
+*/

src/graphics/EInkDisplay2.cpp

@@ -2,105 +2,49 @@
 
 #ifdef USE_EINK
 #include "EInkDisplay2.h"
-#include "GxEPD2_BW.h"
 #include "SPILock.h"
 #include "main.h"
 #include <SPI.h>
 
-#ifdef HELTEC_WIRELESS_PAPER
-SPIClass *hspi = NULL;
-#endif
+/*
+    The macros EINK_DISPLAY_MODEL, EINK_WIDTH, and EINK_HEIGHT are defined as build_flags in a variant's platformio.ini
+    Previously, these macros were defined at the top of this file.
 
-#define COLORED GxEPD_BLACK
-#define UNCOLORED GxEPD_WHITE
+    For archival reasons, note that the following configurations had also been tested during this period:
+    * ifdef RAK4631
+        - 4.2 inch
+          EINK_DISPLAY_MODEL: GxEPD2_420_M01
+          EINK_WIDTH: 300
+          EINK_WIDTH: 400
 
-#if defined(TTGO_T_ECHO)
-#define TECHO_DISPLAY_MODEL GxEPD2_154_D67
-#elif defined(RAK4630)
+        - 2.9 inch
+          EINK_DISPLAY_MODEL: GxEPD2_290_T5D
+          EINK_WIDTH: 296
+          EINK_HEIGHT: 128
 
-// GxEPD2_213_BN - RAK14000 2.13 inch b/w 250x122 - changed from GxEPD2_213_B74 - which was not going to give partial update
-// support
-#define TECHO_DISPLAY_MODEL GxEPD2_213_BN
-
-// 4.2 inch 300x400 - GxEPD2_420_M01
-// #define TECHO_DISPLAY_MODEL GxEPD2_420_M01
-
-// 2.9 inch 296x128 - GxEPD2_290_T5D
-// #define TECHO_DISPLAY_MODEL GxEPD2_290_T5D
-
-// 1.54 inch 200x200 - GxEPD2_154_M09
-// #define TECHO_DISPLAY_MODEL GxEPD2_154_M09
-
-#elif defined(MAKERPYTHON)
-// 2.9 inch 296x128 - GxEPD2_290_T5D
-#define TECHO_DISPLAY_MODEL GxEPD2_290_T5D
-
-#elif defined(PCA10059)
-
-// 4.2 inch 300x400 - GxEPD2_420_M01
-#define TECHO_DISPLAY_MODEL GxEPD2_420_M01
-
-#elif defined(M5_COREINK)
-// M5Stack CoreInk
-// 1.54 inch 200x200 - GxEPD2_154_M09
-#define TECHO_DISPLAY_MODEL GxEPD2_154_M09
-
-#elif defined(HELTEC_WIRELESS_PAPER)
-// #define TECHO_DISPLAY_MODEL GxEPD2_213_T5D
-#define TECHO_DISPLAY_MODEL GxEPD2_213_FC1
-#endif
-
-GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT> *adafruitDisplay;
+        - 1.54 inch
+          EINK_DISPLAY_MODEL: GxEPD2_154_M09
+          EINK_WIDTH: 200
+          EINK_HEIGHT: 200
+*/
 
+// Constructor
 EInkDisplay::EInkDisplay(uint8_t address, int sda, int scl, OLEDDISPLAY_GEOMETRY geometry, HW_I2C i2cBus)
 {
-#if defined(TTGO_T_ECHO)
-    setGeometry(GEOMETRY_RAWMODE, TECHO_DISPLAY_MODEL::WIDTH, TECHO_DISPLAY_MODEL::HEIGHT);
-#elif defined(RAK4630)
+    // Set dimensions in OLEDDisplay base class
+    this->geometry = GEOMETRY_RAWMODE;
+    this->displayWidth = EINK_WIDTH;
+    this->displayHeight = EINK_HEIGHT;
 
-    // GxEPD2_213_BN - RAK14000 2.13 inch b/w 250x122
-    setGeometry(GEOMETRY_RAWMODE, 250, 122);
+    // Round shortest side up to nearest byte, to prevent truncation causing an undersized buffer
+    uint16_t shortSide = min(EINK_WIDTH, EINK_HEIGHT);
+    uint16_t longSide = max(EINK_WIDTH, EINK_HEIGHT);
+    if (shortSide % 8 != 0)
+        shortSide = (shortSide | 7) + 1;
 
-    // GxEPD2_420_M01
-    // setGeometry(GEOMETRY_RAWMODE, 300, 400);
-
-    // GxEPD2_290_T5D
-    // setGeometry(GEOMETRY_RAWMODE, 296, 128);
-
-    // GxEPD2_154_M09
-    // setGeometry(GEOMETRY_RAWMODE, 200, 200);
-
-#elif defined(HELTEC_WIRELESS_PAPER)
-    // GxEPD2_213_BN - 2.13 inch b/w 250x122
-    setGeometry(GEOMETRY_RAWMODE, 250, 122);
-#elif defined(MAKERPYTHON)
-    // GxEPD2_290_T5D
-    setGeometry(GEOMETRY_RAWMODE, 296, 128);
-
-#elif defined(PCA10059)
-
-    // GxEPD2_420_M01
-    setGeometry(GEOMETRY_RAWMODE, 300, 400);
-
-#elif defined(M5_COREINK)
-
-    // M5Stack_CoreInk 200x200
-    // 1.54 inch 200x200 - GxEPD2_154_M09
-    setGeometry(GEOMETRY_RAWMODE, EPD_HEIGHT, EPD_WIDTH);
-#elif defined(my)
-
-    // GxEPD2_290_T5D
-    setGeometry(GEOMETRY_RAWMODE, 296, 128);
-    LOG_DEBUG("GEOMETRY_RAWMODE, 296, 128\n");
-
-#endif
-    // setGeometry(GEOMETRY_RAWMODE, 128, 64); // old resolution
-    // setGeometry(GEOMETRY_128_64); // We originally used this because I wasn't sure if rawmode worked - it does
+    this->displayBufferSize = longSide * (shortSide / 8);
 }
 
-// FIXME quick hack to limit drawing to a very slow rate
-uint32_t lastDrawMsec;
-
 /**
  * Force a display update if we haven't drawn within the specified msecLimit
  */
@@ -112,57 +56,44 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit)
     uint32_t now = millis();
     uint32_t sinceLast = now - lastDrawMsec;
 
-    if (adafruitDisplay && (sinceLast > msecLimit || lastDrawMsec == 0)) {
+    if (adafruitDisplay && (sinceLast > msecLimit || lastDrawMsec == 0))
         lastDrawMsec = now;
+    else
+        return false;
 
     // FIXME - only draw bits have changed (use backbuf similar to the other displays)
-        // tft.drawBitmap(0, 0, buffer, 128, 64, TFT_YELLOW, TFT_BLACK);
+    const bool flipped = config.display.flip_screen;
     for (uint32_t y = 0; y < displayHeight; y++) {
         for (uint32_t x = 0; x < displayWidth; x++) {
             // get src pixel in the page based ordering the OLED lib uses FIXME, super inefficient
             auto b = buffer[x + (y / 8) * displayWidth];
             auto isset = b & (1 << (y & 7));
-                adafruitDisplay->drawPixel(x, y, isset ? COLORED : UNCOLORED);
+
+            // Handle flip here, rather than with setRotation(),
+            // Avoids issues when display width is not a multiple of 8
+            if (flipped)
+                adafruitDisplay->drawPixel((displayWidth - 1) - x, (displayHeight - 1) - y, isset ? GxEPD_BLACK : GxEPD_WHITE);
+            else
+                adafruitDisplay->drawPixel(x, y, isset ? GxEPD_BLACK : GxEPD_WHITE);
         }
     }
 
+    // Trigger the refresh in GxEPD2
     LOG_DEBUG("Updating E-Paper... ");
-
-#if defined(TTGO_T_ECHO)
-        // ePaper.Reset(); // wake the screen from sleep
-        adafruitDisplay->display(false); // FIXME, use partial update mode
-#elif defined(RAK4630) || defined(MAKERPYTHON)
-
-        // RAK14000 2.13 inch b/w 250x122 actually now does support partial updates
-
-        // Full update mode (slow)
-        // adafruitDisplay->display(false); // FIXME, use partial update mode
-
-        // Only enable for e-Paper with support for partial updates and comment out above adafruitDisplay->display(false);
-        //  1.54 inch 200x200 - GxEPD2_154_M09
-        //  2.13 inch 250x122 - GxEPD2_213_BN
-        //  2.9 inch 296x128 - GxEPD2_290_T5D
-        //  4.2 inch 300x400 - GxEPD2_420_M01
     adafruitDisplay->nextPage();
 
-#elif defined(PCA10059) || defined(M5_COREINK)
-        adafruitDisplay->nextPage();
-#elif defined(HELTEC_WIRELESS_PAPER)
-        adafruitDisplay->nextPage();
-#elif defined(PRIVATE_HW) || defined(my)
-        adafruitDisplay->nextPage();
+    // End the update process
+    endUpdate();
 
-#endif
-
-        // Put screen to sleep to save power (possibly not necessary because we already did poweroff inside of display)
-        adafruitDisplay->hibernate();
     LOG_DEBUG("done\n");
-
     return true;
-    } else {
-        // LOG_DEBUG("Skipping eink display\n");
-        return false;
-    }
+}
+
+// End the update process - virtual method, overriden in derived class
+void EInkDisplay::endUpdate()
+{
+    // Power off display hardware, then deep-sleep (Except Wireless Paper V1.1, no deep-sleep)
+    adafruitDisplay->hibernate();
 }
 
 // Write the buffer to the display memory
@@ -171,8 +102,10 @@ void EInkDisplay::display(void)
     // We don't allow regular 'dumb' display() calls to draw on eink until we've shown
     // at least one forceDisplay() keyframe.  This prevents flashing when we should the critical
     // bootscreen (that we want to look nice)
-    if (lastDrawMsec)
+
+    if (lastDrawMsec) {
         forceDisplay(slowUpdateMsec); // Show the first screen a few seconds after boot, then slower
+    }
 }
 
 // Send a command to the display (low level function)
@@ -187,16 +120,11 @@ void EInkDisplay::setDetected(uint8_t detected)
     (void)detected;
 }
 
-// Connect to the display
+// Connect to the display - variant specific
 bool EInkDisplay::connect()
 {
     LOG_INFO("Doing EInk init\n");
 
-#ifdef PIN_EINK_PWR_ON
-    pinMode(PIN_EINK_PWR_ON, OUTPUT);
-    digitalWrite(PIN_EINK_PWR_ON, HIGH); // If we need to assert a pin to power external peripherals
-#endif
-
 #ifdef PIN_EINK_EN
     // backlight power, HIGH is backlight on, LOW is off
     pinMode(PIN_EINK_EN, OUTPUT);
@@ -205,72 +133,70 @@ bool EInkDisplay::connect()
 
 #if defined(TTGO_T_ECHO)
     {
-        auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
+        auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, SPI1);
 
-        adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+        adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
+        adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     }
 #elif defined(RAK4630) || defined(MAKERPYTHON)
     {
         if (eink_found) {
-            auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
-
-            adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
-
+            auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
+            adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
             adafruitDisplay->init(115200, true, 10, false, SPI1, SPISettings(4000000, MSBFIRST, SPI_MODE0));
-
-            // RAK14000 2.13 inch b/w 250x122 does actually now support partial updates
+            // RAK14000 2.13 inch b/w 250x122 does actually now support fast refresh
             adafruitDisplay->setRotation(3);
-            // Partial update support for  1.54, 2.13 RAK14000 b/w , 2.9 and 4.2
+            // Fast refresh support for  1.54, 2.13 RAK14000 b/w , 2.9 and 4.2
             // adafruitDisplay->setRotation(1);
             adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
         } else {
             (void)adafruitDisplay;
         }
     }
-#elif defined(HELTEC_WIRELESS_PAPER)
+
+#elif defined(HELTEC_WIRELESS_PAPER_V1_0) || defined(HELTEC_WIRELESS_PAPER)
     {
+        // Start HSPI
         hspi = new SPIClass(HSPI);
         hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
-        delay(100);
-        pinMode(Vext, OUTPUT);
-        digitalWrite(Vext, LOW);
-        delay(100);
-        auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
-        adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+
+        // VExt already enabled in setup()
+        // RTC GPIO hold disabled in setup()
+
+        // Create GxEPD2 objects
+        auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY, *hspi);
+        adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+
+        // Init GxEPD2
         adafruitDisplay->init();
         adafruitDisplay->setRotation(3);
     }
 #elif defined(PCA10059)
     {
-        auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
-        adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+        auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
+        adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init(115200, true, 10, false, SPI1, SPISettings(4000000, MSBFIRST, SPI_MODE0));
         adafruitDisplay->setRotation(3);
         adafruitDisplay->setPartialWindow(0, 0, displayWidth, displayHeight);
     }
 #elif defined(M5_COREINK)
-    auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
-    adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+    auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
+    adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
     adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
     adafruitDisplay->setRotation(0);
-    adafruitDisplay->setPartialWindow(0, 0, EPD_WIDTH, EPD_HEIGHT);
-#elif defined(my)
+    adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
+#elif defined(my) || defined(ESP32_S3_PICO)
     {
-        auto lowLevel = new TECHO_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
-        adafruitDisplay = new GxEPD2_BW<TECHO_DISPLAY_MODEL, TECHO_DISPLAY_MODEL::HEIGHT>(*lowLevel);
+        auto lowLevel = new EINK_DISPLAY_MODEL(PIN_EINK_CS, PIN_EINK_DC, PIN_EINK_RES, PIN_EINK_BUSY);
+        adafruitDisplay = new GxEPD2_BW<EINK_DISPLAY_MODEL, EINK_DISPLAY_MODEL::HEIGHT>(*lowLevel);
         adafruitDisplay->init(115200, true, 40, false, SPI, SPISettings(4000000, MSBFIRST, SPI_MODE0));
         adafruitDisplay->setRotation(1);
-        adafruitDisplay->setPartialWindow(0, 0, EPD_WIDTH, EPD_HEIGHT);
+        adafruitDisplay->setPartialWindow(0, 0, EINK_WIDTH, EINK_HEIGHT);
     }
 #endif
 
-    // adafruitDisplay->setFullWindow();
-    // adafruitDisplay->fillScreen(UNCOLORED);
-    // adafruitDisplay->drawCircle(100, 100, 20, COLORED);
-    // adafruitDisplay->display(false);
-
     return true;
 }